Remove SH3e sanitization.

diff --git a/gas/.Sanitize b/gas/.Sanitize
index edaefc7..a2f9f4f 100644 (file)
--- a/gas/.Sanitize
+++ b/gas/.Sanitize
@@ -131,30 +131,6 @@ else
        fi
 fi
 
-sh3e_files="ChangeLog ChangeLog.1"
-if ( echo $* | grep keep\-sh3e > /dev/null ) ; then
-       if [ -n "${verbose}" ] ; then
-               echo Keeping sh3e stuff in $sh3e_files.
-       fi
-else
-       if [ -n "${verbose}" ]; then
-               echo -n Cleaning sh3e in `pwd`:
-       fi
-       for f in $sh3e_files ; do
-               if [ -n "${verbose}" ] ; then
-                       echo -n " " $f
-               fi
-               sed -e '/start\-sanitize\-sh3e/,/end\-sanitize\-sh3e/d' -e '/ xl /d' < $f > new
-               if [ -n "${safe}" ] ; then
-                       mv $f .Recover
-               fi
-               mv new $f
-       done
-       if [ -n "${verbose}" ]; then
-               echo ""
-       fi
-fi
-
 rce_files="configure.in configure ChangeLog Makefile.in ChangeLog.1"
 
 if ( echo $* | grep keep\-rce > /dev/null ) ; then

diff --git a/gas/ChangeLog.1 b/gas/ChangeLog.1
index 2493561..43a1f0b 100644 (file)
--- a/gas/ChangeLog.1
+++ b/gas/ChangeLog.1
@@ -387,14 +387,12 @@ Wed Sep  6 21:13:06 1995  Ian Lance Taylor  <ian@cygnus.com>
        first unquoted space.
        (equals): Likewise.
 
-start-sanitize-sh3e
 Wed Sep  6 15:03:53 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
 
        * config/tc-sh.c (get_operands): Read third arg if it exists.
        Otherwise, clear it.
        (get_specific, case F_FR0): Add.
 
-end-sanitize-sh3e
 Wed Sep  6 15:03:53 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
 
        * config/tc-sh.c (get_specific): Delete arg_to_test.
@@ -1136,13 +1134,11 @@ Mon Aug  7 17:18:10 1995  Ian Lance Taylor  <ian@cygnus.com>
        (TARG_CPU_DEP_m68k): Depend upon $(srcdir)/config/m68k-parse.h.
        (m68k-parse.c, m68k-parse.o): New targets.
 
-start-sanitize-sh3e
 Mon Aug  7 02:54:20 1995  Jeff Law  (law@snake.cs.utah.edu)
 
        * config/tc-sh.c (parse_reg): Handle new FP registers.
        (get_specific): Handle new operand types.
 
-end-sanitize-sh3e
 Fri Aug  4 12:29:21 1995  Ian Lance Taylor  <ian@cygnus.com>
 
        * expr.c (op_encoding): Make non-const.  Don't set '"' to

diff --git a/gas/testsuite/.Sanitize b/gas/testsuite/.Sanitize
index 466b14c..a1efe63 100644 (file)
--- a/gas/testsuite/.Sanitize
+++ b/gas/testsuite/.Sanitize
@@ -72,25 +72,4 @@ else
        done
 fi
 
-sh3e_files="ChangeLog"
-if ( echo $* | grep keep\-sh3e > /dev/null ) ; then
-       if [ -n "${verbose}" ] ; then
-               echo Keeping sh3e stuff in $sh3e_files.
-       fi
-else
-       if [ -n "${verbose}" ]; then
-               echo -n Cleaning sh3e in `pwd`:
-       fi
-       for f in $sh3e_files ; do
-               if [ -n "${verbose}" ] ; then
-                       echo -n " " $f
-               fi
-               sed -e '/start\-sanitize\-sh3e/,/end\-sanitize\-sh3e/d' -e '/ xl /d' < $f > new
-               if [ -n "${safe}" ] ; then
-                       mv $f .Recover
-               fi
-               mv new $f
-       done
-fi
-
 # End of file.

diff --git a/gdb/.Sanitize b/gdb/.Sanitize
index dca7747..70a2a30 100644 (file)
--- a/gdb/.Sanitize
+++ b/gdb/.Sanitize
@@ -478,35 +478,6 @@ else
        done
 fi
 
-sh3e_files="ChangeLog"
-
-if ( echo $* | grep keep\-sh3e > /dev/null ) ; then
-       for i in $sh3e_files ; do
-               if test ! -d $i && (grep sanitize-sh3e $i > /dev/null) ; then
-                       if [ -n "${verbose}" ] ; then
-                               echo Keeping sh3e stuff in $i
-                       fi
-               fi
-       done
-else
-       for i in $sh3e_files ; do
-               if test ! -d $i && (grep sanitize-sh3e $i > /dev/null) ; then
-                       if [ -n "${verbose}" ] ; then
-                               echo Removing traces of \"sh3e\" from $i...
-                       fi
-                       cp $i new
-                       sed '/start\-sanitize\-sh3e/,/end-\sanitize\-sh3e/d' < $i > new
-                       if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
-                               if [ -n "${verbose}" ] ; then
-                                       echo Caching $i in .Recover...
-                               fi
-                               mv $i .Recover
-                       fi
-                       mv new $i
-               fi
-       done
-fi
-
 if ( echo $* | grep keep\-gm > /dev/null ) ; then
        for i in * ; do
                if test ! -d $i && (grep sanitize-gm $i > /dev/null) ; then

diff --git a/gdb/ChangeLog-95 b/gdb/ChangeLog-95
index 511416c..13c73c7 100644 (file)
--- a/gdb/ChangeLog-95
+++ b/gdb/ChangeLog-95
@@ -1037,7 +1037,6 @@ Tue Oct 17 08:04:26 1995  Fred Fish  <fnf@rtl.cygnus.com>
 
        * NEWS: Fix typo.
 
-start-sanitize-sh3e
 Mon Oct 16 18:24:03 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
 
        * config/sh/tm-sh.h (REGISTER_VIRTUAL_TYPE): Return builtin_type_float
@@ -1047,7 +1046,6 @@ Mon Oct 16 18:24:03 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
        (NUM_REGS, NUM_REALREGS): Increase from 23 to 41.
        (FPUL_REGNUM, FP0_REGNUM): New macros.
 
-end-sanitize-sh3e
 Mon Oct 16 11:27:06 1995  Stu Grossman  (grossman@cygnus.com)
 
        * remote-mips.c:  Add support for speedy (about 10x faster)

diff --git a/gdb/config/sh/.Sanitize b/gdb/config/sh/.Sanitize
index 1a4ce68..8e95867 100644 (file)
--- a/gdb/config/sh/.Sanitize
+++ b/gdb/config/sh/.Sanitize
@@ -29,33 +29,4 @@ Things-to-lose:
 
 Do-last:
 
-sh3e_files="tm-sh.h"
-
-if ( echo $* | grep keep\-sh3e > /dev/null ) ; then
-       for i in $sh3e_files ; do
-               if test ! -d $i && (grep sanitize-sh3e $i > /dev/null) ; then
-                       if [ -n "${verbose}" ] ; then
-                               echo Keeping sh3e stuff in $i
-                       fi
-               fi
-       done
-else
-       for i in $sh3e_files ; do
-               if test ! -d $i && (grep sanitize-sh3e $i > /dev/null) ; then
-                       if [ -n "${verbose}" ] ; then
-                               echo Removing traces of \"sh3e\" from $i...
-                       fi
-                       cp $i new
-                       sed '/start\-sanitize\-sh3e/,/end-\sanitize\-sh3e/d' < $i > new
-                       if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
-                               if [ -n "${verbose}" ] ; then
-                                       echo Caching $i in .Recover...
-                               fi
-                               mv $i .Recover
-                       fi
-                       mv new $i
-               fi
-       done
-fi
-
 # End of file.

diff --git a/gdb/config/sh/tm-sh.h b/gdb/config/sh/tm-sh.h
index 726cb96..0b3d92f 100644 (file)
--- a/gdb/config/sh/tm-sh.h
+++ b/gdb/config/sh/tm-sh.h
@@ -98,14 +98,10 @@ extern CORE_ADDR sh_skip_prologue ();
 /* Return the GDB type object for the "standard" data type
    of data in register N.  */
 
-#define REGISTER_VIRTUAL_TYPE(N) builtin_type_int
-/* start-sanitize-sh3e */
-#undef  REGISTER_VIRTUAL_TYPE
 #define REGISTER_VIRTUAL_TYPE(N) \
        ((((N) >= FP0_REGNUM && (N) < FP0_REGNUM+32)    \
          || (N) == FPUL_REGNUM)                        \
          ? builtin_type_float : builtin_type_int)
-/* end-sanitize-sh3e */
 
 /* Initializer for an array of names of registers.
    Entries beyond the first NUM_REGS are ignored.  */
@@ -113,23 +109,12 @@ extern CORE_ADDR sh_skip_prologue ();
 #define REGISTER_NAMES \
   {"r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", \
    "r8", "r9", "r10","r11","r12","r13","r14","r15",\
-   "pc", "pr","gbr","vbr","mach","macl","sr","ticks","stalls","cycles","insts" ,"plr","tlr"    }
-/* start-sanitize-sh3e */
-#undef REGISTER_NAMES
-#define REGISTER_NAMES \
-  {"r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", \
-   "r8", "r9", "r10","r11","r12","r13","r14","r15",\
    "pc", "pr","gbr","vbr","mach","macl", "sr", "fpul", "fpscr", \
    "fr0", "fr1", "fr2", "fr3", "fr4", "fr5", "fr6", "fr7", \
    "fr8", "fr9", "fr10","fr11","fr12","fr13","fr14","fr15",\
   }
-/* end-sanitize-sh3e */
 
-#define NUM_REGS 28
-/* start-sanitize-sh3e */
-#undef  NUM_REGS
 #define NUM_REGS 41
-/* end-sanitize-sh3e */
 
 /* Register numbers of various important registers.
    Note that some of these values are "real" register numbers,
@@ -149,12 +134,10 @@ extern CORE_ADDR sh_skip_prologue ();
 #define MACL_REGNUM    21
 #define SR_REGNUM      22
 #define NUM_REALREGS    23
-/* start-sanitize-sh3e */
 #define FPUL_REGNUM    23
 #define FP0_REGNUM     25
 #undef  NUM_REALREGS
 #define NUM_REALREGS    41
-/* end-sanitize-sh3e */
 
 /* Store the address of the place in which to copy the structure the
    subroutine will return.  This is called from call_function. 

diff --git a/gdb/testsuite/.Sanitize b/gdb/testsuite/.Sanitize
index dcd889d..bbb5fc3 100644 (file)
--- a/gdb/testsuite/.Sanitize
+++ b/gdb/testsuite/.Sanitize
@@ -47,25 +47,5 @@ Things-to-lose:
 # done.
 
 Do-last:
-sh3e_files="ChangeLog"
-if ( echo $* | grep keep\-sh3e > /dev/null ) ; then
-       if [ -n "${verbose}" ] ; then
-               echo Keeping sh3e stuff in $sh3e_files.
-       fi
-else
-       if [ -n "${verbose}" ]; then
-               echo -n Cleaning sh3e in `pwd`:
-       fi
-       for f in $sh3e_files ; do
-               if [ -n "${verbose}" ] ; then
-                       echo -n " " $f
-               fi
-               sed -e '/start\-sanitize\-sh3e/,/end\-sanitize\-sh3e/d' -e '/ xl /d' < $f > new
-               if [ -n "${safe}" ] ; then
-                       mv $f .Recover
-               fi
-               mv new $f
-       done
-fi
 
 # eof

diff --git a/gdb/testsuite/ChangeLog b/gdb/testsuite/ChangeLog
index 9ee25fd..2ce10cc 100644 (file)
--- a/gdb/testsuite/ChangeLog
+++ b/gdb/testsuite/ChangeLog
@@ -189,13 +189,11 @@ Sat Sep 23 01:22:23 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
        * gdb.stabs/weird.exp:  Remove rs6000 xfail, xcoffread.c now
        handles common blocks.
 
-start-sanitize-sh3e
 Thu Sep 21 01:28:10 1995  Jeff Law  (law@snake.cs.utah.edu)
 
        * gdb.disasm/sh3.s (fmac): Update for new assembler syntax
        * gdb.disasm/sh3.exp (fmac): Corresponding changes.
 
-end-sanitize-sh3e
 Wed Sep 20 13:15:05 1995  Ian Lance Taylor  <ian@cygnus.com>
 
        * Makefile.in (maintainer-clean): New target, synonym for

diff --git a/opcodes/.Sanitize b/opcodes/.Sanitize
index a80329a..32a9ead 100644 (file)
--- a/opcodes/.Sanitize
+++ b/opcodes/.Sanitize
@@ -105,27 +105,6 @@ else
        done
 fi
 
-sh3e_files="ChangeLog sh-dis.c sh-opc.h"
-if ( echo $* | grep keep\-sh3e > /dev/null ) ; then
-       if [ -n "${verbose}" ] ; then
-               echo Keeping sh3e stuff in $sh3e_files.
-       fi
-else
-       if [ -n "${verbose}" ]; then
-               echo -n Cleaning sh3e in `pwd`:
-       fi
-       for f in $sh3e_files ; do
-               if [ -n "${verbose}" ] ; then
-                       echo -n " " $f
-               fi
-               sed -e '/start\-sanitize\-sh3e/,/end\-sanitize\-sh3e/d' -e '/ xl /d' < $f > new
-               if [ -n "${safe}" ] ; then
-                       mv $f .Recover
-               fi
-               mv new $f
-       done
-fi
-
 rce_files="configure.in configure"
 if ( echo $* | grep keep\-rce > /dev/null ) ; then
        for i in $rce_files ; do

diff --git a/opcodes/ChangeLog b/opcodes/ChangeLog
index 337d3f7..d8ca155 100644 (file)
--- a/opcodes/ChangeLog
+++ b/opcodes/ChangeLog
@@ -205,12 +205,10 @@ Fri Sep  8 01:07:38 1995  Ian Lance Taylor  <ian@cygnus.com>
        * mips-opc.c: Change unaligned loads and stores with "t,A"
        operands to use "t,A(b)".
 
-start-sanitize-sh3e
 Thu Sep  7 19:02:46 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
 
        * sh-dis.c (print_insn_shx): Add F_FR0 support.
 
-end-sanitize-sh3e
 Thu Sep  7 19:02:46 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
 
        * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
@@ -225,13 +223,11 @@ Wed Sep  6 21:21:33 1995  Ian Lance Taylor  <ian@cygnus.com>
        * configure.in: Substitute HDEFINES.
        * configure: Rebuild.
 
-start-sanitize-sh3e
 Wed Sep  6 15:08:09 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
 
        * sh-opc.h (sh_arg_type): Add F_FR0.
        (sh_table, case fmac): Add F_FR0 as first argument.
        
-end-sanitize-sh3e
 Wed Sep  6 15:08:09 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
 
        * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
@@ -272,12 +268,10 @@ Mon Sep  4 14:28:46 1995  Ian Lance Taylor  <ian@cygnus.com>
        Use them rather than looking through target Makefile fragments.
        * configure: Rebuild.
 
-start-sanitize-sh3e
 Thu Aug 31 12:35:32 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
 
        * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
 
-end-sanitize-sh3e
 Wed Aug 30 13:52:28 1995  Doug Evans  <dje@canuck.cygnus.com>
 
        * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
@@ -290,13 +284,11 @@ Wed Aug 30 13:52:28 1995  Doug Evans  <dje@canuck.cygnus.com>
        (sparc_{encode,decode}_prefetch): New functions.
        * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
 
-start-sanitize-sh3e
 Wed Aug 30 11:11:58 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
 
        * sh-opc.h: Add blank lines to improve readabililty of sh3e
        instructions.
 
-end-sanitize-sh3e
 Wed Aug 30 11:09:38 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
 
        * sh-dis.c: Correct comment on first line of file.
@@ -323,12 +315,10 @@ Mon Aug 21 17:33:36 1995  Ian Lance Taylor  <ian@cygnus.com>
        and likewise for the size variants.  Add dbhs as an alias for
        dbcc.
 
-start-sanitize-sh3e
 Fri Aug 11 13:40:24 1995  Jeff Law  (law@snake.cs.utah.edu)
 
        * sh-opc.h (FP sts instructions): Update to match reality.
 
-end-sanitize-sh3e
 Mon Aug  7 16:12:58 1995  Ian Lance Taylor  <ian@cygnus.com>
 
        * m68k-dis.c: (fpcr_names): Add % before all register names.
@@ -346,7 +336,6 @@ Mon Aug  7 16:12:58 1995  Ian Lance Taylor  <ian@cygnus.com>
        * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
        for jsr.
 
-start-sanitize-sh3e
 Mon Aug  7 02:21:40 1995  Jeff Law  (law@snake.cs.utah.edu)
 
        * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
@@ -354,7 +343,6 @@ Mon Aug  7 02:21:40 1995  Jeff Law  (law@snake.cs.utah.edu)
        * sh-opc.h (sh_arg_type): Add new operand types.
        (sh_table): Add new opcodes from SH3E Floating Point ISA.
 
-end-sanitize-sh3e
 Sat Aug  5 16:50:14 1995  Fred Fish  <fnf@cygnus.com>
 
        * Makefile.in (distclean): Remove generated file config.h.