net: macb: DMA-unmap full rx-buffer
authorSoren Brinkmann <soren.brinkmann@xilinx.com>
Tue, 4 Mar 2014 16:46:40 +0000 (08:46 -0800)
committerDavid S. Miller <davem@davemloft.net>
Thu, 6 Mar 2014 01:40:25 +0000 (20:40 -0500)
When allocating RX buffers a fixed size is used, while freeing is based
on actually received bytes, resulting in the following kernel warning
when CONFIG_DMA_API_DEBUG is enabled:
 WARNING: CPU: 0 PID: 0 at lib/dma-debug.c:1051 check_unmap+0x258/0x894()
 macb e000b000.ethernet: DMA-API: device driver frees DMA memory with different size [device address=0x000000002d170040] [map size=1536 bytes] [unmap size=60 bytes]
 Modules linked in:
 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.14.0-rc3-xilinx-00220-g49f84081ce4f #65
 [<c001516c>] (unwind_backtrace) from [<c0011df8>] (show_stack+0x10/0x14)
 [<c0011df8>] (show_stack) from [<c03c775c>] (dump_stack+0x7c/0xc8)
 [<c03c775c>] (dump_stack) from [<c00245cc>] (warn_slowpath_common+0x60/0x84)
 [<c00245cc>] (warn_slowpath_common) from [<c0024670>] (warn_slowpath_fmt+0x2c/0x3c)
 [<c0024670>] (warn_slowpath_fmt) from [<c0227d44>] (check_unmap+0x258/0x894)
 [<c0227d44>] (check_unmap) from [<c0228588>] (debug_dma_unmap_page+0x64/0x70)
 [<c0228588>] (debug_dma_unmap_page) from [<c02ab78c>] (gem_rx+0x118/0x170)
 [<c02ab78c>] (gem_rx) from [<c02ac4d4>] (macb_poll+0x24/0x94)
 [<c02ac4d4>] (macb_poll) from [<c031222c>] (net_rx_action+0x6c/0x188)
 [<c031222c>] (net_rx_action) from [<c0028a28>] (__do_softirq+0x108/0x280)
 [<c0028a28>] (__do_softirq) from [<c0028e8c>] (irq_exit+0x84/0xf8)
 [<c0028e8c>] (irq_exit) from [<c000f360>] (handle_IRQ+0x68/0x8c)
 [<c000f360>] (handle_IRQ) from [<c0008528>] (gic_handle_irq+0x3c/0x60)
 [<c0008528>] (gic_handle_irq) from [<c0012904>] (__irq_svc+0x44/0x78)
 Exception stack(0xc056df20 to 0xc056df68)
 df20: 00000001 c0577430 00000000 c0577430 04ce8e0d 00000002 edfce238 00000000
 df40: 04e20f78 00000002 c05981f4 00000000 00000008 c056df68 c0064008 c02d7658
 df60: 20000013 ffffffff
 [<c0012904>] (__irq_svc) from [<c02d7658>] (cpuidle_enter_state+0x54/0xf8)
 [<c02d7658>] (cpuidle_enter_state) from [<c02d77dc>] (cpuidle_idle_call+0xe0/0x138)
 [<c02d77dc>] (cpuidle_idle_call) from [<c000f660>] (arch_cpu_idle+0x8/0x3c)
 [<c000f660>] (arch_cpu_idle) from [<c006bec4>] (cpu_startup_entry+0xbc/0x124)
 [<c006bec4>] (cpu_startup_entry) from [<c053daec>] (start_kernel+0x350/0x3b0)
 ---[ end trace d5fdc38641bd3a11 ]---
 Mapped at:
  [<c0227184>] debug_dma_map_page+0x48/0x11c
  [<c02ab32c>] gem_rx_refill+0x154/0x1f8
  [<c02ac7b4>] macb_open+0x270/0x3e0
  [<c03152e0>] __dev_open+0x7c/0xfc
  [<c031554c>] __dev_change_flags+0x8c/0x140

Fixing this by passing the same size which is passed during mapping the
memory to the unmap function as well.

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Reviewed-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/ethernet/cadence/macb.c

index 1f03e20..d0c38e0 100644 (file)
@@ -730,7 +730,7 @@ static int gem_rx(struct macb *bp, int budget)
                skb_put(skb, len);
                addr = MACB_BF(RX_WADDR, MACB_BFEXT(RX_WADDR, addr));
                dma_unmap_single(&bp->pdev->dev, addr,
-                                len, DMA_FROM_DEVICE);
+                                bp->rx_buffer_size, DMA_FROM_DEVICE);
 
                skb->protocol = eth_type_trans(skb, bp->dev);
                skb_checksum_none_assert(skb);