* Reset the phy after disabling host wakeup to reset the Rx buffer.
*/
if (hw->phy.type == e1000_phy_82578) {
- hw->phy.ops.read_reg(hw, BM_WUC, &i);
+ e1e_rphy(hw, BM_WUC, &i);
ret_val = e1000_phy_hw_reset_ich8lan(hw);
if (ret_val)
return ret_val;
(hw->phy.type == e1000_phy_82577)) {
ew32(FCRTV_PCH, hw->fc.refresh_time);
- ret_val = hw->phy.ops.write_reg(hw,
- PHY_REG(BM_PORT_CTRL_PAGE, 27),
- hw->fc.pause_time);
+ ret_val = e1e_wphy(hw, PHY_REG(BM_PORT_CTRL_PAGE, 27),
+ hw->fc.pause_time);
if (ret_val)
return ret_val;
}
return ret_val;
break;
case e1000_phy_ife:
- ret_val = hw->phy.ops.read_reg(hw, IFE_PHY_MDIX_CONTROL,
- ®_data);
+ ret_val = e1e_rphy(hw, IFE_PHY_MDIX_CONTROL, ®_data);
if (ret_val)
return ret_val;
reg_data |= IFE_PMC_AUTO_MDIX;
break;
}
- ret_val = hw->phy.ops.write_reg(hw, IFE_PHY_MDIX_CONTROL,
- reg_data);
+ ret_val = e1e_wphy(hw, IFE_PHY_MDIX_CONTROL, reg_data);
if (ret_val)
return ret_val;
break;
{
if (hw->phy.type == e1000_phy_ife)
return e1e_wphy(hw, IFE_PHY_SPECIAL_CONTROL_LED,
- (IFE_PSCL_PROBE_MODE | IFE_PSCL_PROBE_LEDS_OFF));
+ (IFE_PSCL_PROBE_MODE |
+ IFE_PSCL_PROBE_LEDS_OFF));
ew32(LEDCTL, hw->mac.ledctl_mode1);
return 0;
**/
static s32 e1000_setup_led_pchlan(struct e1000_hw *hw)
{
- return hw->phy.ops.write_reg(hw, HV_LED_CONFIG,
- (u16)hw->mac.ledctl_mode1);
+ return e1e_wphy(hw, HV_LED_CONFIG, (u16)hw->mac.ledctl_mode1);
}
/**
**/
static s32 e1000_cleanup_led_pchlan(struct e1000_hw *hw)
{
- return hw->phy.ops.write_reg(hw, HV_LED_CONFIG,
- (u16)hw->mac.ledctl_default);
+ return e1e_wphy(hw, HV_LED_CONFIG, (u16)hw->mac.ledctl_default);
}
/**
}
}
- return hw->phy.ops.write_reg(hw, HV_LED_CONFIG, data);
+ return e1e_wphy(hw, HV_LED_CONFIG, data);
}
/**
}
}
- return hw->phy.ops.write_reg(hw, HV_LED_CONFIG, data);
+ return e1e_wphy(hw, HV_LED_CONFIG, data);
}
/**
if ((hw->phy.type == e1000_phy_82578) ||
(hw->phy.type == e1000_phy_82579) ||
(hw->phy.type == e1000_phy_82577)) {
- hw->phy.ops.read_reg(hw, HV_SCC_UPPER, &phy_data);
- hw->phy.ops.read_reg(hw, HV_SCC_LOWER, &phy_data);
- hw->phy.ops.read_reg(hw, HV_ECOL_UPPER, &phy_data);
- hw->phy.ops.read_reg(hw, HV_ECOL_LOWER, &phy_data);
- hw->phy.ops.read_reg(hw, HV_MCC_UPPER, &phy_data);
- hw->phy.ops.read_reg(hw, HV_MCC_LOWER, &phy_data);
- hw->phy.ops.read_reg(hw, HV_LATECOL_UPPER, &phy_data);
- hw->phy.ops.read_reg(hw, HV_LATECOL_LOWER, &phy_data);
- hw->phy.ops.read_reg(hw, HV_COLC_UPPER, &phy_data);
- hw->phy.ops.read_reg(hw, HV_COLC_LOWER, &phy_data);
- hw->phy.ops.read_reg(hw, HV_DC_UPPER, &phy_data);
- hw->phy.ops.read_reg(hw, HV_DC_LOWER, &phy_data);
- hw->phy.ops.read_reg(hw, HV_TNCRS_UPPER, &phy_data);
- hw->phy.ops.read_reg(hw, HV_TNCRS_LOWER, &phy_data);
+ e1e_rphy(hw, HV_SCC_UPPER, &phy_data);
+ e1e_rphy(hw, HV_SCC_LOWER, &phy_data);
+ e1e_rphy(hw, HV_ECOL_UPPER, &phy_data);
+ e1e_rphy(hw, HV_ECOL_LOWER, &phy_data);
+ e1e_rphy(hw, HV_MCC_UPPER, &phy_data);
+ e1e_rphy(hw, HV_MCC_LOWER, &phy_data);
+ e1e_rphy(hw, HV_LATECOL_UPPER, &phy_data);
+ e1e_rphy(hw, HV_LATECOL_LOWER, &phy_data);
+ e1e_rphy(hw, HV_COLC_UPPER, &phy_data);
+ e1e_rphy(hw, HV_COLC_LOWER, &phy_data);
+ e1e_rphy(hw, HV_DC_UPPER, &phy_data);
+ e1e_rphy(hw, HV_DC_LOWER, &phy_data);
+ e1e_rphy(hw, HV_TNCRS_UPPER, &phy_data);
+ e1e_rphy(hw, HV_TNCRS_LOWER, &phy_data);
}
}
**/
s32 e1000_copper_link_setup_82577(struct e1000_hw *hw)
{
- struct e1000_phy_info *phy = &hw->phy;
s32 ret_val;
u16 phy_data;
/* Enable CRS on TX. This must be set for half-duplex operation. */
- ret_val = phy->ops.read_reg(hw, I82577_CFG_REG, &phy_data);
+ ret_val = e1e_rphy(hw, I82577_CFG_REG, &phy_data);
if (ret_val)
goto out;
/* Enable downshift */
phy_data |= I82577_CFG_ENABLE_DOWNSHIFT;
- ret_val = phy->ops.write_reg(hw, I82577_CFG_REG, phy_data);
+ ret_val = e1e_wphy(hw, I82577_CFG_REG, phy_data);
out:
return ret_val;
}
if (phy->type == e1000_phy_82578) {
- ret_val = phy->ops.read_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL,
- &phy_data);
+ ret_val = e1e_rphy(hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_data);
if (ret_val)
return ret_val;
/* 82578 PHY - set the downshift count to 1x. */
phy_data |= I82578_EPSCR_DOWNSHIFT_ENABLE;
phy_data &= ~I82578_EPSCR_DOWNSHIFT_COUNTER_MASK;
- ret_val = phy->ops.write_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL,
- phy_data);
+ ret_val = e1e_wphy(hw, M88E1000_EXT_PHY_SPEC_CTRL, phy_data);
if (ret_val)
return ret_val;
}
* We didn't get link.
* Reset the DSP and cross our fingers.
*/
- ret_val = e1e_wphy(hw,
- M88E1000_PHY_PAGE_SELECT,
- 0x001d);
+ ret_val = e1e_wphy(hw, M88E1000_PHY_PAGE_SELECT,
+ 0x001d);
if (ret_val)
return ret_val;
ret_val = e1000e_phy_reset_dsp(hw);
goto out;
/* Do not apply workaround if in PHY loopback bit 14 set */
- hw->phy.ops.read_reg(hw, PHY_CONTROL, &data);
+ e1e_rphy(hw, PHY_CONTROL, &data);
if (data & PHY_CONTROL_LB)
goto out;
/* check if link is up and at 1Gbps */
- ret_val = hw->phy.ops.read_reg(hw, BM_CS_STATUS, &data);
+ ret_val = e1e_rphy(hw, BM_CS_STATUS, &data);
if (ret_val)
goto out;
mdelay(200);
/* flush the packets in the fifo buffer */
- ret_val = hw->phy.ops.write_reg(hw, HV_MUX_DATA_CTRL,
- HV_MUX_DATA_CTRL_GEN_TO_MAC |
- HV_MUX_DATA_CTRL_FORCE_SPEED);
+ ret_val = e1e_wphy(hw, HV_MUX_DATA_CTRL, HV_MUX_DATA_CTRL_GEN_TO_MAC |
+ HV_MUX_DATA_CTRL_FORCE_SPEED);
if (ret_val)
goto out;
- ret_val = hw->phy.ops.write_reg(hw, HV_MUX_DATA_CTRL,
- HV_MUX_DATA_CTRL_GEN_TO_MAC);
+ ret_val = e1e_wphy(hw, HV_MUX_DATA_CTRL, HV_MUX_DATA_CTRL_GEN_TO_MAC);
out:
return ret_val;
s32 ret_val;
u16 data;
- ret_val = phy->ops.read_reg(hw, I82577_PHY_STATUS_2, &data);
+ ret_val = e1e_rphy(hw, I82577_PHY_STATUS_2, &data);
if (!ret_val)
phy->cable_polarity = (data & I82577_PHY_STATUS2_REV_POLARITY)
u16 phy_data;
bool link;
- ret_val = phy->ops.read_reg(hw, PHY_CONTROL, &phy_data);
+ ret_val = e1e_rphy(hw, PHY_CONTROL, &phy_data);
if (ret_val)
goto out;
e1000e_phy_force_speed_duplex_setup(hw, &phy_data);
- ret_val = phy->ops.write_reg(hw, PHY_CONTROL, phy_data);
+ ret_val = e1e_wphy(hw, PHY_CONTROL, phy_data);
if (ret_val)
goto out;
if (ret_val)
goto out;
- ret_val = phy->ops.read_reg(hw, I82577_PHY_STATUS_2, &data);
+ ret_val = e1e_rphy(hw, I82577_PHY_STATUS_2, &data);
if (ret_val)
goto out;
if (ret_val)
goto out;
- ret_val = phy->ops.read_reg(hw, PHY_1000T_STATUS, &data);
+ ret_val = e1e_rphy(hw, PHY_1000T_STATUS, &data);
if (ret_val)
goto out;
s32 ret_val;
u16 phy_data, length;
- ret_val = phy->ops.read_reg(hw, I82577_PHY_DIAG_STATUS, &phy_data);
+ ret_val = e1e_rphy(hw, I82577_PHY_DIAG_STATUS, &phy_data);
if (ret_val)
goto out;