ARM: Kirkwood: Describe iConnects temperature sensor in DT.

Now that we have I2C support in DT, describe the LM63 in
the DT file for the iConnect.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>

diff --git a/arch/arm/boot/dts/kirkwood-iconnect.dts b/arch/arm/boot/dts/kirkwood-iconnect.dts
index 026a1f8..1b5898e 100644 (file)
--- a/arch/arm/boot/dts/kirkwood-iconnect.dts
+++ b/arch/arm/boot/dts/kirkwood-iconnect.dts
@@ -18,6 +18,14 @@
        };
 
        ocp@f1000000 {
+               i2c@11000 {
+                       status = "okay";
+
+                       lm63: lm63@4c {
+                               compatible = "national,lm63";
+                               reg = <0x4c>;
+                       };
+               };
                serial@12000 {
                        clock-frequency = <200000000>;
                        status = "ok";

diff --git a/arch/arm/mach-kirkwood/board-iconnect.c b/arch/arm/mach-kirkwood/board-iconnect.c
index b0d3cc4..df043aa 100644 (file)
--- a/arch/arm/mach-kirkwood/board-iconnect.c
+++ b/arch/arm/mach-kirkwood/board-iconnect.c
@@ -20,7 +20,6 @@
 #include <linux/mv643xx_eth.h>
 #include <linux/gpio.h>
 #include <linux/leds.h>
-#include <linux/i2c.h>
 #include <linux/input.h>
 #include <linux/gpio_keys.h>
 #include <asm/mach/arch.h>
@@ -90,12 +89,6 @@ static unsigned int iconnect_mpp_config[] __initdata = {
        0
 };
 
-static struct i2c_board_info __initdata iconnect_board_info[] = {
-       {
-               I2C_BOARD_INFO("lm63", 0x4c),
-       },
-};
-
 static struct mtd_partition iconnect_nand_parts[] = {
        {
                .name = "flash",
@@ -142,9 +135,6 @@ void __init iconnect_init(void)
 {
        kirkwood_mpp_conf(iconnect_mpp_config);
        kirkwood_nand_init(ARRAY_AND_SIZE(iconnect_nand_parts), 25);
-       kirkwood_i2c_init();
-       i2c_register_board_info(0, iconnect_board_info,
-               ARRAY_SIZE(iconnect_board_info));
 
        kirkwood_ehci_init();
        kirkwood_ge00_init(&iconnect_ge00_data);