imx8qm-rom7720-a1.dtb \
fsl-imx8qxp-ai_ml.dtb \
fsl-imx8qxp-colibri.dtb \
- fsl-imx8qxp-apalis.dtb \
fsl-imx8qxp-mek.dtb \
imx8-deneb.dtb \
imx8-giedi.dtb
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
-/*
- * Copyright 2020 Toradex
- */
-
-&{/imx8qx-pm} {
-
- u-boot,dm-pre-proper;
-};
-
-&mu {
- u-boot,dm-pre-proper;
-};
-
-&clk {
- u-boot,dm-pre-proper;
-};
-
-&iomuxc {
- u-boot,dm-pre-proper;
-};
-
-&pd_lsio {
- u-boot,dm-pre-proper;
-};
-
-&pd_lsio_gpio0 {
- u-boot,dm-pre-proper;
-};
-
-&pd_lsio_gpio1 {
- u-boot,dm-pre-proper;
-};
-
-&pd_lsio_gpio2 {
- u-boot,dm-pre-proper;
-};
-
-&pd_lsio_gpio3 {
- u-boot,dm-pre-proper;
-};
-
-&pd_lsio_gpio4 {
- u-boot,dm-pre-proper;
-};
-
-&pd_lsio_gpio5 {
- u-boot,dm-pre-proper;
-};
-
-&pd_lsio_gpio6 {
- u-boot,dm-pre-proper;
-};
-
-&pd_lsio_gpio7 {
- u-boot,dm-pre-proper;
-};
-
-&pd_dma {
- u-boot,dm-pre-proper;
-};
-
-&pd_dma_lpuart0 {
- u-boot,dm-pre-proper;
-};
-
-&pd_dma_lpuart3 {
- u-boot,dm-pre-proper;
-};
-
-&pd_conn {
- u-boot,dm-pre-proper;
-};
-
-&pd_conn_sdch0 {
- u-boot,dm-pre-proper;
-};
-
-&pd_conn_sdch1 {
- u-boot,dm-pre-proper;
-};
-
-&pd_conn_sdch2 {
- u-boot,dm-pre-proper;
-};
-
-&pd_conn_enet0 {
- u-boot,dm-pre-proper;
-};
-
-&gpio0 {
- u-boot,dm-pre-proper;
-};
-
-&gpio1 {
- u-boot,dm-pre-proper;
-};
-
-&gpio2 {
- u-boot,dm-pre-proper;
-};
-
-&gpio3 {
- u-boot,dm-pre-proper;
-};
-
-&gpio4 {
- u-boot,dm-pre-proper;
-};
-
-&gpio5 {
- u-boot,dm-pre-proper;
-};
-
-&gpio6 {
- u-boot,dm-pre-proper;
-};
-
-&gpio7 {
- u-boot,dm-pre-proper;
-};
-
-&lpuart3 {
- u-boot,dm-pre-proper;
-};
-
-&lpuart0 {
- u-boot,dm-pre-proper;
-};
-
-&usdhc1 {
- u-boot,dm-pre-proper;
- /delete-property/ assigned-clock-parents;
-};
-
-&usdhc2 {
- u-boot,dm-pre-proper;
- /delete-property/ assigned-clock-parents;
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
-/*
- * Copyright 2020 Toradex
- */
-
-/dts-v1/;
-
-#include "fsl-imx8qxp.dtsi"
-#include "fsl-imx8qxp-apalis-u-boot.dtsi"
-
-/ {
- model = "Toradex Apalis iMX8X";
- compatible = "toradex,apalis-imx8x", "fsl,imx8qxp";
-
- chosen {
- bootargs = "console=ttyLP1,115200";
- stdout-path = &lpuart1;
- };
-
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- reg_usb_otg1_vbus: regulator@0 {
- compatible = "regulator-fixed";
- reg = <0>;
- regulator-name = "usb_otg1_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
- };
-};
-
-&iomuxc {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_hog0>, <&pinctrl_hog1>, <&pinctrl_reset_moci>;
-
- apalis-imx8x {
- /* Apalis UART1 */
- pinctrl_lpuart1: lpuart1grp {
- fsl,pins = <
- SC_P_UART1_RX_ADMA_UART1_RX 0x06000020 /* SODIMM 118 */
- SC_P_UART1_TX_ADMA_UART1_TX 0x06000020 /* SODIMM 112 */
- >;
- };
-
- /* On-module Gigabit Ethernet PHY Micrel KSZ9031 */
- pinctrl_fec1: fec1grp {
- fsl,pins = <
- SC_P_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB0_PAD 0x14a0
- SC_P_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB1_PAD 0x14a0
- SC_P_ENET0_MDC_CONN_ENET0_MDC 0x06000020
- SC_P_ENET0_MDIO_CONN_ENET0_MDIO 0x06000020
- SC_P_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL 0x61
- SC_P_ENET0_RGMII_TXC_CONN_ENET0_RGMII_TXC 0x61
- SC_P_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0 0x61
- SC_P_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1 0x61
- SC_P_ENET0_RGMII_TXD2_CONN_ENET0_RGMII_TXD2 0x61
- SC_P_ENET0_RGMII_TXD3_CONN_ENET0_RGMII_TXD3 0x61
- SC_P_ENET0_RGMII_RXC_CONN_ENET0_RGMII_RXC 0x61
- SC_P_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL 0x61
- SC_P_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0 0x61
- SC_P_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1 0x61
- SC_P_ENET0_RGMII_RXD2_CONN_ENET0_RGMII_RXD2 0x61
- SC_P_ENET0_RGMII_RXD3_CONN_ENET0_RGMII_RXD3 0x61
- /* On-module ETH_RESET# */
- SC_P_MIPI_CSI0_MCLK_OUT_LSIO_GPIO3_IO04 0x06000020
- /* On-module ETH_INT# */
- SC_P_ADC_IN2_LSIO_GPIO1_IO12 0x21
- >;
- };
-
- /* Apalis BKL_ON */
- pinctrl_gpio_bkl_on: gpio-bkl-on {
- fsl,pins = <
- SC_P_QSPI0A_DQS_LSIO_GPIO3_IO13 0x40 /* SODIMM 286 */
- >;
- };
-
- pinctrl_hog0: hog0grp {
- fsl,pins = <
- SC_P_COMP_CTL_GPIO_1V8_3V3_GPIORHB_PAD 0x000514a0
- >;
- };
-
- pinctrl_hog1: hog1grp {
- fsl,pins = <
- /* Apalis USBO1_EN */
- SC_P_QSPI0A_SCLK_LSIO_GPIO3_IO16 0x41 /* SODIMM 274 */
- >;
- };
-
- /* Apalis RESET_MOCI# */
- pinctrl_reset_moci: gpioresetmocigrp {
- fsl,pins = <
- SC_P_PCIE_CTRL0_CLKREQ_B_LSIO_GPIO4_IO01 0x21
- >;
- };
-
- /* On-module eMMC */
- pinctrl_usdhc1: usdhc1grp {
- fsl,pins = <
- SC_P_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041
- SC_P_EMMC0_CMD_CONN_EMMC0_CMD 0x21
- SC_P_EMMC0_DATA0_CONN_EMMC0_DATA0 0x21
- SC_P_EMMC0_DATA1_CONN_EMMC0_DATA1 0x21
- SC_P_EMMC0_DATA2_CONN_EMMC0_DATA2 0x21
- SC_P_EMMC0_DATA3_CONN_EMMC0_DATA3 0x21
- SC_P_EMMC0_DATA4_CONN_EMMC0_DATA4 0x21
- SC_P_EMMC0_DATA5_CONN_EMMC0_DATA5 0x21
- SC_P_EMMC0_DATA6_CONN_EMMC0_DATA6 0x21
- SC_P_EMMC0_DATA7_CONN_EMMC0_DATA7 0x21
- SC_P_EMMC0_STROBE_CONN_EMMC0_STROBE 0x41
- SC_P_EMMC0_RESET_B_CONN_EMMC0_RESET_B 0x21
- >;
- };
-
- pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
- fsl,pins = <
- SC_P_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041
- SC_P_EMMC0_CMD_CONN_EMMC0_CMD 0x21
- SC_P_EMMC0_DATA0_CONN_EMMC0_DATA0 0x21
- SC_P_EMMC0_DATA1_CONN_EMMC0_DATA1 0x21
- SC_P_EMMC0_DATA2_CONN_EMMC0_DATA2 0x21
- SC_P_EMMC0_DATA3_CONN_EMMC0_DATA3 0x21
- SC_P_EMMC0_DATA4_CONN_EMMC0_DATA4 0x21
- SC_P_EMMC0_DATA5_CONN_EMMC0_DATA5 0x21
- SC_P_EMMC0_DATA6_CONN_EMMC0_DATA6 0x21
- SC_P_EMMC0_DATA7_CONN_EMMC0_DATA7 0x21
- SC_P_EMMC0_STROBE_CONN_EMMC0_STROBE 0x41
- SC_P_EMMC0_RESET_B_CONN_EMMC0_RESET_B 0x21
- >;
- };
-
- pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
- fsl,pins = <
- SC_P_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041
- SC_P_EMMC0_CMD_CONN_EMMC0_CMD 0x21
- SC_P_EMMC0_DATA0_CONN_EMMC0_DATA0 0x21
- SC_P_EMMC0_DATA1_CONN_EMMC0_DATA1 0x21
- SC_P_EMMC0_DATA2_CONN_EMMC0_DATA2 0x21
- SC_P_EMMC0_DATA3_CONN_EMMC0_DATA3 0x21
- SC_P_EMMC0_DATA4_CONN_EMMC0_DATA4 0x21
- SC_P_EMMC0_DATA5_CONN_EMMC0_DATA5 0x21
- SC_P_EMMC0_DATA6_CONN_EMMC0_DATA6 0x21
- SC_P_EMMC0_DATA7_CONN_EMMC0_DATA7 0x21
- SC_P_EMMC0_STROBE_CONN_EMMC0_STROBE 0x41
- SC_P_EMMC0_RESET_B_CONN_EMMC0_RESET_B 0x21
- >;
- };
-
- /* Apalis MMC1_CD# */
- pinctrl_usdhc2_gpio: mmc1gpiogrp {
- fsl,pins = <
- SC_P_USDHC1_CD_B_LSIO_GPIO4_IO22 0x06000021 /* SODIMM 164 */
- >;
- };
-
- pinctrl_usdhc2_gpio_sleep: usdhc1gpioslpgrp {
- fsl,pins = <
- SC_P_USDHC1_CD_B_LSIO_GPIO4_IO22 0x60 /* SODIMM 164 */
- >;
- };
-
- /* Apalis USBH_EN */
- pinctrl_usbh_en: usbhen {
- fsl,pins = <
- SC_P_USB_SS3_TC1_LSIO_GPIO4_IO04 0x40 /* SODIMM 84 */
- >;
- };
-
- /* Apalis MMC1 */
- pinctrl_usdhc2: usdhc2grp {
- fsl,pins = <
- SC_P_USDHC1_CLK_CONN_USDHC1_CLK 0x06000041 /* SODIMM 154 */
- SC_P_USDHC1_CMD_CONN_USDHC1_CMD 0x21 /* SODIMM 150 */
- SC_P_USDHC1_DATA0_CONN_USDHC1_DATA0 0x21 /* SODIMM 160 */
- SC_P_USDHC1_DATA1_CONN_USDHC1_DATA1 0x21 /* SODIMM 162 */
- SC_P_USDHC1_DATA2_CONN_USDHC1_DATA2 0x21 /* SODIMM 144 */
- SC_P_USDHC1_DATA3_CONN_USDHC1_DATA3 0x21 /* SODIMM 146 */
- SC_P_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x21
- >;
- };
-
- pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
- fsl,pins = <
- SC_P_USDHC1_CLK_CONN_USDHC1_CLK 0x06000041 /* SODIMM 154 */
- SC_P_USDHC1_CMD_CONN_USDHC1_CMD 0x21 /* SODIMM 150 */
- SC_P_USDHC1_DATA0_CONN_USDHC1_DATA0 0x21 /* SODIMM 160 */
- SC_P_USDHC1_DATA1_CONN_USDHC1_DATA1 0x21 /* SODIMM 162 */
- SC_P_USDHC1_DATA2_CONN_USDHC1_DATA2 0x21 /* SODIMM 144 */
- SC_P_USDHC1_DATA3_CONN_USDHC1_DATA3 0x21 /* SODIMM 146 */
- SC_P_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x21
- >;
- };
-
- pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
- fsl,pins = <
- SC_P_USDHC1_CLK_CONN_USDHC1_CLK 0x06000041 /* SODIMM 154 */
- SC_P_USDHC1_CMD_CONN_USDHC1_CMD 0x21 /* SODIMM 150 */
- SC_P_USDHC1_DATA0_CONN_USDHC1_DATA0 0x21 /* SODIMM 160 */
- SC_P_USDHC1_DATA1_CONN_USDHC1_DATA1 0x21 /* SODIMM 162 */
- SC_P_USDHC1_DATA2_CONN_USDHC1_DATA2 0x21 /* SODIMM 144 */
- SC_P_USDHC1_DATA3_CONN_USDHC1_DATA3 0x21 /* SODIMM 146 */
- SC_P_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x21
- >;
- };
-
- pinctrl_usdhc2_sleep: usdhc2slpgrp {
- fsl,pins = <
- SC_P_USDHC1_CLK_LSIO_GPIO4_IO23 0x60 /* SODIMM 154 */
- SC_P_USDHC1_CMD_LSIO_GPIO4_IO24 0x60 /* SODIMM 150 */
- SC_P_USDHC1_DATA0_LSIO_GPIO4_IO25 0x60 /* SODIMM 160 */
- SC_P_USDHC1_DATA1_LSIO_GPIO4_IO26 0x60 /* SODIMM 162 */
- SC_P_USDHC1_DATA2_LSIO_GPIO4_IO27 0x60 /* SODIMM 144 */
- SC_P_USDHC1_DATA3_LSIO_GPIO4_IO28 0x60 /* SODIMM 146 */
- SC_P_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x21
- >;
- };
- };
-};
-
-/* Apalis Gigabit LAN */
-&fec1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_fec1>;
- fsl,magic-packet;
- phy-handle = <ðphy0>;
- phy-mode = "rgmii-id";
- phy-reset-duration = <10>;
- phy-reset-post-delay = <150>;
- phy-reset-gpios = <&gpio3 4 GPIO_ACTIVE_LOW>;
- status = "okay";
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
-
- ethphy0: ethernet-phy@4 {
- compatible = "ethernet-phy-ieee802.3-c22";
- reg = <4>;
- };
- };
-};
-
-/* Apalis UART1 */
-&lpuart1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_lpuart1>;
- status = "okay";
-};
-
-/* On-module eMMC */
-&usdhc1 {
- bus-width = <8>;
- non-removable;
- pinctrl-names = "default", "state_100mhz", "state_200mhz";
- pinctrl-0 = <&pinctrl_usdhc1>;
- pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
- pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
- status = "okay";
-};
-
-/* Apalis MMC1 */
-&usdhc2 {
- bus-width = <4>;
- cd-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
- pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
- pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
- pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
- pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
- pinctrl-3 = <&pinctrl_usdhc2_sleep>, <&pinctrl_usdhc2_gpio_sleep>;
- disable-wp;
- status = "okay";
-};
select BOARD_LATE_INIT
select IMX8QXP
-config TARGET_APALIS_IMX8X
- bool "Support Apalis iMX8X module"
- select BOARD_LATE_INIT
- select IMX8QXP
-
config TARGET_DENEB
bool "Support i.MX8QXP Capricorn Deneb board"
select BOARD_LATE_INIT
source "board/advantech/imx8qm_rom7720_a1/Kconfig"
source "board/toradex/apalis-imx8/Kconfig"
source "board/toradex/colibri-imx8x/Kconfig"
-source "board/toradex/apalis-imx8x/Kconfig"
source "board/siemens/capricorn/Kconfig"
config IMX_SNVS_SEC_SC
+++ /dev/null
-if TARGET_APALIS_IMX8X
-
-config SYS_BOARD
- default "apalis-imx8x"
-
-config SYS_VENDOR
- default "toradex"
-
-config SYS_CONFIG_NAME
- default "apalis-imx8x"
-
-config TDX_CFG_BLOCK
- default y
-
-config TDX_HAVE_MMC
- default y
-
-config TDX_CFG_BLOCK_DEV
- default "0"
-
-config TDX_CFG_BLOCK_PART
- default "1"
-
-# Toradex config block in eMMC, at the end of 1st "boot sector"
-config TDX_CFG_BLOCK_OFFSET
- default "-512"
-
-config IMX_CONFIG
- default "board/toradex/apalis-imx8x/apalis-imx8x-imximage.cfg"
-
-source "board/toradex/common/Kconfig"
-
-endif
+++ /dev/null
-Apalis iMX8X
-M: Marcel Ziswiler <marcel.ziswiler@toradex.com>
-W: http://developer.toradex.com/software/linux/linux-software
-S: Maintained
-F: arch/arm/dts/fsl-imx8x-apalis.dts
-F: arch/arm/dts/fsl-imx8x-apalis-u-boot.dtsi
-F: board/toradex/apalis-imx8x/
-F: configs/apalis-imx8x_defconfig
-F: doc/board/toradex/apalis-imx8x.rst
-F: include/configs/apalis-imx8x.h
+++ /dev/null
-# SPDX-License-Identifier: GPL-2.0+
-#
-# Copyright 2020 Toradex
-#
-
-obj-y += apalis-imx8x.o
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright 2020 Toradex
- *
- * Refer doc/imx/mkimage/imx8image.txt for more details about how-to configure
- * and create imx8image boot image
- */
-
-
-/* Boot from SD, sector size 0x400 */
-BOOT_FROM EMMC_FASTBOOT 0x400
-/* SoC type IMX8QX */
-SOC_TYPE IMX8QX
-/* Append seco container image */
-APPEND mx8qx-ahab-container.img
-/* Create the 2nd container */
-CONTAINER
-/* Add scfw image with exec attribute */
-IMAGE SCU mx8qx-apalis-scfw-tcm.bin
-/* Add ATF image with exec attribute */
-IMAGE A35 bl31.bin 0x80000000
-/* Add U-Boot image with load attribute */
-DATA A35 u-boot-dtb.bin 0x80020000
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2020 Toradex
- */
-
-#include <common.h>
-#include <cpu_func.h>
-#include <init.h>
-
-#include <asm/arch/clock.h>
-#include <asm/arch/imx8-pins.h>
-#include <asm/arch/iomux.h>
-#include <asm/arch/sci/sci.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/global_data.h>
-#include <asm/gpio.h>
-#include <asm/io.h>
-#include <env.h>
-#include <errno.h>
-#include <linux/libfdt.h>
-
-#include "../common/tdx-cfg-block.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define UART_PAD_CTRL ((SC_PAD_CONFIG_OUT_IN << PADRING_CONFIG_SHIFT) | \
- (SC_PAD_ISO_OFF << PADRING_LPCONFIG_SHIFT) | \
- (SC_PAD_28FDSOI_DSE_DV_HIGH << PADRING_DSE_SHIFT) | \
- (SC_PAD_28FDSOI_PS_PU << PADRING_PULL_SHIFT))
-
-static iomux_cfg_t uart1_pads[] = {
- SC_P_UART1_RX | MUX_PAD_CTRL(UART_PAD_CTRL),
- SC_P_UART1_TX | MUX_PAD_CTRL(UART_PAD_CTRL),
-};
-
-static void setup_iomux_uart(void)
-{
- imx8_iomux_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads));
-}
-
-void board_mem_get_layout(u64 *phys_sdram_1_start,
- u64 *phys_sdram_1_size,
- u64 *phys_sdram_2_start,
- u64 *phys_sdram_2_size)
-{
- u32 is_dualx = 0, val = 0;
- sc_err_t scierr = sc_misc_otp_fuse_read(-1, 6, &val);
-
- if (scierr == SC_ERR_NONE) {
- /* DX has two A35 cores disabled */
- is_dualx = (val & 0xf) != 0x0;
- }
-
- *phys_sdram_1_start = PHYS_SDRAM_1;
- if (is_dualx)
- /* Our DX based SKUs only have 1 GB RAM */
- *phys_sdram_1_size = SZ_1G;
- else
- *phys_sdram_1_size = PHYS_SDRAM_1_SIZE;
- *phys_sdram_2_start = PHYS_SDRAM_2;
- *phys_sdram_2_size = PHYS_SDRAM_2_SIZE;
-}
-
-int board_early_init_f(void)
-{
- sc_pm_clock_rate_t rate;
- sc_err_t err = 0;
-
- /*
- * This works around that having only UART3 up the baudrate is 1.2M
- * instead of 115.2k. Set UART0 clock root to 80 MHz
- */
- rate = 80000000;
- err = sc_pm_set_clock_rate(-1, SC_R_UART_0, SC_PM_CLK_PER, &rate);
- if (err != SC_ERR_NONE)
- return 0;
-
- /* Set UART3 clock root to 80 MHz and enable it */
- rate = SC_80MHZ;
- err = sc_pm_setup_uart(SC_R_UART_1, rate);
- if (err != SC_ERR_NONE)
- return 0;
-
- setup_iomux_uart();
-
- return 0;
-}
-
-#if IS_ENABLED(CONFIG_DM_GPIO)
-static void board_gpio_init(void)
-{
- /* TODO */
-}
-#else
-static inline void board_gpio_init(void) {}
-#endif
-
-#if IS_ENABLED(CONFIG_FEC_MXC)
-#include <miiphy.h>
-
-int board_phy_config(struct phy_device *phydev)
-{
- if (phydev->drv->config)
- phydev->drv->config(phydev);
-
- return 0;
-}
-#endif
-
-int checkboard(void)
-{
- puts("Model: Toradex Apalis iMX8X\n");
-
- build_info();
- print_bootinfo();
-
- return 0;
-}
-
-int board_init(void)
-{
- board_gpio_init();
-
- return 0;
-}
-
-/*
- * Board specific reset that is system reset.
- */
-void reset_cpu(void)
-{
- /* TODO */
-}
-
-#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
-int ft_board_setup(void *blob, struct bd_info *bd)
-{
- return ft_common_board_setup(blob, bd);
-}
-#endif
-
-int board_mmc_get_env_dev(int devno)
-{
- return devno;
-}
-
-int board_late_init(void)
-{
-#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
-/* TODO move to common */
- env_set("board_name", "Apalis iMX8X");
-#endif
-
- return 0;
-}
#if defined(CONFIG_TARGET_APALIS_IMX6) || \
defined(CONFIG_TARGET_APALIS_IMX8) || \
- defined(CONFIG_TARGET_APALIS_IMX8X) || \
defined(CONFIG_TARGET_COLIBRI_IMX6) || \
defined(CONFIG_TARGET_COLIBRI_IMX8X) || \
defined(CONFIG_TARGET_VERDIN_IMX8MM) || \
it = console_buffer[0];
#if defined(CONFIG_TARGET_APALIS_IMX8) || \
- defined(CONFIG_TARGET_APALIS_IMX8X) || \
defined(CONFIG_TARGET_COLIBRI_IMX6ULL) || \
defined(CONFIG_TARGET_COLIBRI_IMX8X) || \
defined(CONFIG_TARGET_VERDIN_IMX8MM) || \
tdx_hw_tag.prodid = APALIS_IMX8QP;
}
} else if (is_cpu_type(MXC_CPU_IMX8QXP)) {
-#ifdef CONFIG_TARGET_APALIS_IMX8X
- if (it == 'y' || it == 'Y' || wb == 'y' || wb == 'Y') {
- tdx_hw_tag.prodid = APALIS_IMX8QXP_WIFI_BT_IT;
- } else {
- if (gd->ram_size == 0x40000000)
- tdx_hw_tag.prodid = APALIS_IMX8DXP;
- else
- tdx_hw_tag.prodid = APALIS_IMX8QXP;
- }
-#elif CONFIG_TARGET_COLIBRI_IMX8X
+#ifdef CONFIG_TARGET_COLIBRI_IMX8X
if (it == 'y' || it == 'Y') {
if (wb == 'y' || wb == 'Y')
tdx_hw_tag.prodid = COLIBRI_IMX8QXP_WIFI_BT_IT;
+++ /dev/null
-CONFIG_ARM=y
-CONFIG_ARCH_IMX8=y
-CONFIG_SYS_TEXT_BASE=0x80020000
-CONFIG_SYS_MALLOC_LEN=0x2800000
-CONFIG_SYS_MALLOC_F_LEN=0x4000
-CONFIG_NR_DRAM_BANKS=3
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_OFFSET=0xFFFFDE00
-CONFIG_DM_GPIO=y
-CONFIG_DEFAULT_DEVICE_TREE="fsl-imx8qxp-apalis"
-CONFIG_TARGET_APALIS_IMX8X=y
-CONFIG_SYS_LOAD_ADDR=0x89000000
-CONFIG_SYS_MEMTEST_START=0x88000000
-CONFIG_SYS_MEMTEST_END=0x89000000
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_REMAKE_ELF=y
-CONFIG_FIT=y
-CONFIG_OF_SYSTEM_SETUP=y
-CONFIG_BOOTDELAY=1
-CONFIG_LOG=y
-# CONFIG_DISPLAY_BOARDINFO is not set
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_SYS_PROMPT="Apalis iMX8X # "
-CONFIG_CMD_CPU=y
-# CONFIG_BOOTM_NETBSD is not set
-CONFIG_CMD_ASKENV=y
-CONFIG_CMD_MEMTEST=y
-CONFIG_CMD_CLK=y
-CONFIG_CMD_DM=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_PCI=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_UUID=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_MMC=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_SYS_MMC_ENV_PART=1
-CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
-CONFIG_USE_ETHPRIME=y
-CONFIG_ETHPRIME="eth0"
-CONFIG_VERSION_VARIABLE=y
-CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_IP_DEFRAG=y
-CONFIG_TFTP_BLOCKSIZE=4096
-CONFIG_TFTP_TSIZE=y
-CONFIG_BOOTCOUNT_LIMIT=y
-CONFIG_BOOTCOUNT_ENV=y
-CONFIG_CLK_IMX8=y
-CONFIG_CPU=y
-CONFIG_MXC_GPIO=y
-CONFIG_DM_I2C=y
-CONFIG_SYS_I2C_IMX_LPI2C=y
-CONFIG_I2C_MUX=y
-CONFIG_I2C_MUX_PCA954x=y
-CONFIG_MISC=y
-CONFIG_SUPPORT_EMMC_BOOT=y
-CONFIG_FSL_USDHC=y
-CONFIG_PHYLIB=y
-CONFIG_PHY_ADDR_ENABLE=y
-CONFIG_PHY_MICREL=y
-CONFIG_PHY_MICREL_KSZ90X1=y
-CONFIG_DM_ETH=y
-CONFIG_FEC_MXC_SHARE_MDIO=y
-CONFIG_FEC_MXC_MDIO_BASE=0x5B040000
-CONFIG_FEC_MXC=y
-CONFIG_MII=y
-CONFIG_PCI=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_IMX8=y
-CONFIG_POWER_DOMAIN=y
-CONFIG_IMX8_POWER_DOMAIN=y
-CONFIG_DM_REGULATOR=y
-CONFIG_DM_REGULATOR_FIXED=y
-CONFIG_DM_REGULATOR_GPIO=y
-CONFIG_DM_SERIAL=y
-CONFIG_FSL_LPUART=y
-CONFIG_DM_THERMAL=y
-CONFIG_IMX_SCU_THERMAL=y
-# CONFIG_EFI_LOADER is not set
+++ /dev/null
-.. SPDX-License-Identifier: GPL-2.0+
-
-Apalis iMX8X V1.1A Module (SoC NXP i.MX8QXP RevB)
-=================================================
-
-Quick Start
------------
-
-- Get and Build the ARM trusted firmware
-- Get System Controller firmware
-- Get SECO container
-- Build U-Boot
-- Load U-Boot binary using uuu
-- Flash U-Boot binary into the eMMC
-- Boot
-
-Note: builddir is U-Boot build directory (source directory for in-tree builds)
-
-Get and Build the ARM Trusted Firmware
---------------------------------------
-
-.. code-block:: bash
-
- $ cd $(builddir)
- $ git clone -b toradex_imx_5.4.70_2.3.0 http://git.toradex.com/cgit/imx-atf.git
- $ make PLAT=imx8qx bl31 -C imx-atf
- $ cp imx-atf/build/imx8qx/release/bl31.bin $(builddir)
-
-Get System Controller firmware
----------------------------------------
-
-.. code-block:: bash
-
- $ wget https://github.com/toradex/i.MX-System-Controller-Firmware/raw/master/src/scfw_export_mx8qx_b0/build_mx8qx_b0/mx8qx-apalis-scfw-tcm.bin
-
-Get SECO container
----------------------------------------
-
-.. code-block:: bash
-
- $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/imx-seco-3.7.4.bin
- $ sh imx-seco-3.7.4.bin
- $ cp imx-seco-3.7.4/firmware/seco/mx8qxb0-ahab-container.img $(builddir)/mx8qx-ahab-container.img
-
-Build U-Boot
-------------
-.. code-block:: bash
-
- $ make apalis-imx8x_defconfig
- $ make u-boot-dtb.imx
-
-Load the U-Boot Binary Using UUU
---------------------------------
-
-Get the latest version of the universal update utility (uuu) aka ``mfgtools 3.0``:
-
-https://community.nxp.com/external-link.jspa?url=https%3A%2F%2Fgithub.com%2FNXPmicro%2Fmfgtools%2Freleases
-
-Put the module into USB recovery aka serial downloader mode, connect USB device
-to your host and execute uuu:
-
-.. code-block:: bash
-
- sudo ./uuu $(builddir)/u-boot-dtb.imx
-
-Flash the U-Boot Binary into the eMMC
--------------------------------------
-
-Burn the ``u-boot-dtb.imx`` binary to the primary eMMC hardware boot area
-partition and boot:
-
-.. code-block:: bash
-
- load mmc 1:1 $loadaddr u-boot-dtb.imx
- setexpr blkcnt ${filesize} + 0x1ff && setexpr blkcnt ${blkcnt} / 0x200
- mmc dev 0 1
- mmc write ${loadaddr} 0x0 ${blkcnt}
:maxdepth: 2
apalis-imx8
- apalis-imx8x
colibri_imx7
colibri-imx8x
verdin-imx8mm
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright 2020 Toradex
- */
-
-#ifndef __APALIS_IMX8X_H
-#define __APALIS_IMX8X_H
-
-#include <asm/arch/imx-regs.h>
-#include <linux/sizes.h>
-#include <linux/stringify.h>
-
-#define CONFIG_SYS_FSL_ESDHC_ADDR 0
-#define USDHC1_BASE_ADDR 0x5b010000
-#define USDHC2_BASE_ADDR 0x5b020000
-
-#define CONFIG_IPADDR 192.168.10.2
-#define CONFIG_NETMASK 255.255.255.0
-#define CONFIG_SERVERIP 192.168.10.1
-
-#define MEM_LAYOUT_ENV_SETTINGS \
- "kernel_addr_r=0x80280000\0" \
- "fdt_addr_r=0x83100000\0" \
- "ramdisk_addr_r=0x8a000000\0" \
- "scriptaddr=0x83200000\0"
-
-#ifdef CONFIG_AHAB_BOOT
-#define AHAB_ENV "sec_boot=yes\0"
-#else
-#define AHAB_ENV "sec_boot=no\0"
-#endif
-
-/* Boot M4 */
-#define M4_BOOT_ENV \
- "m4_0_image=m4_0.bin\0" \
- "loadm4image_0=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} " \
- "${m4_0_image}\0" \
- "m4boot_0=run loadm4image_0; dcache flush; bootaux ${loadaddr} 0\0" \
-
-#define MFG_NAND_PARTITION ""
-
-#define BOOT_TARGET_DEVICES(func) \
- func(MMC, mmc, 1) \
- func(MMC, mmc, 0) \
- func(DHCP, dhcp, na)
-#include <config_distro_bootcmd.h>
-#undef BOOTENV_RUN_NET_USB_START
-#define BOOTENV_RUN_NET_USB_START ""
-
-#define CONFIG_MFG_ENV_SETTINGS \
- "mfgtool_args=setenv bootargs ${consoleargs} " \
- "rdinit=/linuxrc g_mass_storage.stall=0 " \
- "g_mass_storage.removable=1 g_mass_storage.idVendor=0x066F " \
- "g_mass_storage.idProduct=0x37FF " \
- "g_mass_storage.iSerialNumber=\"\" " MFG_NAND_PARTITION \
- "${vidargs} clk_ignore_unused\0" \
- "initrd_addr=0x83800000\0" \
- "bootcmd_mfg=run mfgtool_args;booti ${loadaddr} ${initrd_addr} " \
- "${fdt_addr};\0" \
-
-/* Initial environment variables */
-#define CONFIG_EXTRA_ENV_SETTINGS \
- AHAB_ENV \
- BOOTENV \
- CONFIG_MFG_ENV_SETTINGS \
- M4_BOOT_ENV \
- MEM_LAYOUT_ENV_SETTINGS \
- "boot_file=Image\0" \
- "consoleargs=console=ttyLP3,${baudrate} earlycon\0" \
- "fdt_file=imx8qxp-apalis-eval.dtb\0" \
- "fdtfile=imx8qxp-apalis-eval.dtb\0" \
- "finduuid=part uuid mmc ${mmcdev}:2 uuid\0" \
- "image=Image\0" \
- "initrd_addr=0x83800000\0" \
- "mmcargs=setenv bootargs ${consoleargs} " \
- "root=PARTUUID=${uuid} rootwait " \
- "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
- "mmcpart=1\0" \
- "netargs=setenv bootargs ${consoleargs} " \
- "root=/dev/nfs ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp " \
- "${vidargs}\0" \
- "nfsboot=run netargs; dhcp ${loadaddr} ${image}; tftp ${fdt_addr} " \
- "apalis-imx8x/${fdt_file}; booti ${loadaddr} - " \
- "${fdt_addr}\0" \
- "panel=NULL\0" \
- "script=boot.scr\0" \
- "update_uboot=askenv confirm Did you load u-boot-dtb.imx (y/N)?; " \
- "if test \"$confirm\" = \"y\"; then " \
- "setexpr blkcnt ${filesize} + 0x1ff && setexpr blkcnt " \
- "${blkcnt} / 0x200; mmc dev 0 1; mmc write ${loadaddr} 0x0 " \
- "${blkcnt}; fi\0" \
- "vidargs=video=imxdpufb5:off video=imxdpufb6:off video=imxdpufb7:off\0"
-
-/* Link Definitions */
-
-#define CONFIG_SYS_INIT_SP_ADDR 0x80200000
-
-/* Environment in eMMC, before config block at the end of 1st "boot sector" */
-
-/* On Apalis iMX8X USDHC1 is eMMC, USDHC2 is 4-bit SD */
-#define CONFIG_SYS_FSL_USDHC_NUM 2
-
-#define CONFIG_SYS_BOOTM_LEN SZ_64M /* Increase max gunzip size */
-
-#define CONFIG_SYS_SDRAM_BASE 0x80000000
-#define PHYS_SDRAM_1 0x80000000
-#define PHYS_SDRAM_2 0x880000000
-#define PHYS_SDRAM_1_SIZE SZ_2G /* 2 GB */
-#define PHYS_SDRAM_2_SIZE 0x00000000 /* 0 GB */
-
-/* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE SZ_2K
-#define CONFIG_SYS_MAXARGS 64
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
- sizeof(CONFIG_SYS_PROMPT) + 16)
-
-/* Generic Timer Definitions */
-#define COUNTER_FREQUENCY 8000000 /* 8MHz */
-
-/* Networking */
-#define CONFIG_FEC_ENET_DEV 0
-#define IMX_FEC_BASE 0x5b040000
-#define CONFIG_FEC_MXC_PHYADDR 0x4
-#define PHY_ANEG_TIMEOUT 20000
-
-#endif /* __APALIS_IMX8X_H */
projects / platform / kernel / u-boot.git / commitdiff