Say Y here if you want the debug print routines to direct
their output to the second serial port on these devices.
+ config DEBUG_DAVINCI_DA8XX_UART1
+ bool "Kernel low-level debugging on DaVinci DA8XX using UART1"
+ depends on ARCH_DAVINCI_DA8XX
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to UART1 serial port on DaVinci DA8XX devices.
+
+ config DEBUG_DAVINCI_DA8XX_UART2
+ bool "Kernel low-level debugging on DaVinci DA8XX using UART2"
+ depends on ARCH_DAVINCI_DA8XX
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to UART2 serial port on DaVinci DA8XX devices.
+
+ config DEBUG_DAVINCI_DMx_UART0
+ bool "Kernel low-level debugging on DaVinci DMx using UART0"
+ depends on ARCH_DAVINCI_DMx
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to UART0 serial port on DaVinci DMx devices.
+
+ config DEBUG_DAVINCI_TNETV107X_UART1
+ bool "Kernel low-level debugging on DaVinci TNETV107x using UART1"
+ depends on ARCH_DAVINCI_TNETV107X
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to UART1 serial port on DaVinci TNETV107X
+ devices.
+
config DEBUG_DC21285_PORT
bool "Kernel low-level debugging messages via footbridge serial port"
depends on FOOTBRIDGE
#define UART_SHIFT 2
- .pushsection .data
-davinci_uart_phys: .word 0
-davinci_uart_virt: .word 0
- .popsection
-
- .macro addruart, rp, rv, tmp
-
- /* Use davinci_uart_phys/virt if already configured */
-10: adr \rp, 99f @ get effective addr of 99f
- ldr \rv, [\rp] @ get absolute addr of 99f
- sub \rv, \rv, \rp @ offset between the two
- ldr \rp, [\rp, #4] @ abs addr of omap_uart_phys
- sub \tmp, \rp, \rv @ make it effective
- ldr \rp, [\tmp, #0] @ davinci_uart_phys
- ldr \rv, [\tmp, #4] @ davinci_uart_virt
- cmp \rp, #0 @ is port configured?
- cmpne \rv, #0
- bne 100f @ already configured
-
- /* Check the debug UART address set in uncompress.h */
- and \rp, pc, #0xff000000
- ldr \rv, =DAVINCI_UART_INFO_OFS
- add \rp, \rp, \rv
-
- /* Copy uart phys address from decompressor uart info */
- ldr \rv, [\rp, #0]
- str \rv, [\tmp, #0]
-
- /* Copy uart virt address from decompressor uart info */
- ldr \rv, [\rp, #4]
- str \rv, [\tmp, #4]
-
- b 10b
+#if defined(CONFIG_DEBUG_DAVINCI_DMx_UART0)
+#define UART_BASE DAVINCI_UART0_BASE
+#elif defined(CONFIG_DEBUG_DAVINCI_DA8XX_UART0)
+#define UART_BASE DA8XX_UART0_BASE
+#elif defined(CONFIG_DEBUG_DAVINCI_DA8XX_UART1)
+#define UART_BASE DA8XX_UART1_BASE
+#elif defined(CONFIG_DEBUG_DAVINCI_DA8XX_UART2)
+#define UART_BASE DA8XX_UART2_BASE
+#elif defined(CONFIG_DEBUG_DAVINCI_TNETV107X_UART1)
+#define UART_BASE TNETV107X_UART2_BASE
+#define UART_VIRTBASE TNETV107X_UART2_VIRT
+#else
+#error "Select a specifc port for DEBUG_LL"
+#endif
- .align
-99: .word .
- .word davinci_uart_phys
- .ltorg
+#ifndef UART_VIRTBASE
+#define UART_VIRTBASE IO_ADDRESS(UART_BASE)
+#endif
-100:
+ .macro addruart, rp, rv, tmp
+ ldr \rp, =UART_BASE
+ ldr \rv, =UART_VIRTBASE
.endm
.macro senduart,rd,rx
/*
* I/O mapping
*/
-#define IO_PHYS 0x01c00000UL
+#define IO_PHYS UL(0x01c00000)
#define IO_OFFSET 0xfd000000 /* Virtual IO = 0xfec00000 */
#define IO_SIZE 0x00400000
#define IO_VIRT (IO_PHYS + IO_OFFSET)
#include <mach/hardware.h>
-/*
- * Stolen area that contains debug uart physical and virtual addresses. These
- * addresses are filled in by the uncompress.h code, and are used by the debug
- * macros in debug-macro.S.
- *
- * This area sits just below the page tables (see arch/arm/kernel/head.S).
- * We define it as a relative offset from start of usable RAM.
- */
-#define DAVINCI_UART_INFO_OFS 0x3ff8
-
#define DAVINCI_UART0_BASE (IO_PHYS + 0x20000)
#define DAVINCI_UART1_BASE (IO_PHYS + 0x20400)
#define DAVINCI_UART2_BASE (IO_PHYS + 0x20800)
barrier();
}
-static inline void set_uart_info(u32 phys, void * __iomem virt)
+static inline void set_uart_info(u32 phys)
{
- /*
- * Get address of some.bss variable and round it down
- * a la CONFIG_AUTO_ZRELADDR.
- */
- u32 ram_start = (u32)&uart & 0xf8000000;
- u32 *uart_info = (u32 *)(ram_start + DAVINCI_UART_INFO_OFS);
-
uart = (u32 *)phys;
- uart_info[0] = phys;
- uart_info[1] = (u32)virt;
}
-#define _DEBUG_LL_ENTRY(machine, phys, virt) \
- if (machine_is_##machine()) { \
- set_uart_info(phys, virt); \
- break; \
+#define _DEBUG_LL_ENTRY(machine, phys) \
+ { \
+ if (machine_is_##machine()) { \
+ set_uart_info(phys); \
+ break; \
+ } \
}
#define DEBUG_LL_DAVINCI(machine, port) \
- _DEBUG_LL_ENTRY(machine, DAVINCI_UART##port##_BASE, \
- IO_ADDRESS(DAVINCI_UART##port##_BASE))
+ _DEBUG_LL_ENTRY(machine, DAVINCI_UART##port##_BASE)
#define DEBUG_LL_DA8XX(machine, port) \
- _DEBUG_LL_ENTRY(machine, DA8XX_UART##port##_BASE, \
- IO_ADDRESS(DA8XX_UART##port##_BASE))
+ _DEBUG_LL_ENTRY(machine, DA8XX_UART##port##_BASE)
#define DEBUG_LL_TNETV107X(machine, port) \
- _DEBUG_LL_ENTRY(machine, TNETV107X_UART##port##_BASE, \
- TNETV107X_UART##port##_VIRT)
+ _DEBUG_LL_ENTRY(machine, TNETV107X_UART##port##_BASE)
static inline void __arch_decomp_setup(unsigned long arch_id)
{
projects / platform / upstream / kernel-adaptation-pc.git / commitdiff