extern unsigned long get_phb_buid (struct device_node *);
extern int rtas_setup_phb(struct pci_controller *phb);
- extern unsigned long pci_probe_only;
-
-/* ---- EEH internal-use-only related routines ---- */
#ifdef CONFIG_EEH
+void pci_addr_cache_build(void);
void pci_addr_cache_insert_device(struct pci_dev *dev);
void pci_addr_cache_remove_device(struct pci_dev *dev);
-void pci_addr_cache_build(void);
-struct pci_dev *pci_get_device_by_addr(unsigned long addr);
-
-/**
- * eeh_slot_error_detail -- record and EEH error condition to the log
- * @pdn: pci device node
- * @severity: EEH_LOG_TEMP_FAILURE or EEH_LOG_PERM_FAILURE
- *
- * Obtains the EEH error details from the RTAS subsystem,
- * and then logs these details with the RTAS error log system.
- */
-#define EEH_LOG_TEMP_FAILURE 1
-#define EEH_LOG_PERM_FAILURE 2
-void eeh_slot_error_detail (struct pci_dn *pdn, int severity);
-
-/**
- * rtas_pci_enable - enable IO transfers for this slot
- * @pdn: pci device node
- * @function: either EEH_THAW_MMIO or EEH_THAW_DMA
- *
- * Enable I/O transfers to this slot
- */
-#define EEH_THAW_MMIO 2
-#define EEH_THAW_DMA 3
-int rtas_pci_enable(struct pci_dn *pdn, int function);
-
-/**
- * rtas_set_slot_reset -- unfreeze a frozen slot
- * @pdn: pci device node
- *
- * Clear the EEH-frozen condition on a slot. This routine
- * does this by asserting the PCI #RST line for 1/8th of
- * a second; this routine will sleep while the adapter is
- * being reset.
- *
- * Returns a non-zero value if the reset failed.
- */
-int rtas_set_slot_reset (struct pci_dn *);
-int eeh_wait_for_slot_status(struct pci_dn *pdn, int max_wait_msecs);
-
-/**
- * eeh_restore_bars - Restore device configuration info.
- * @pdn: pci device node
- *
- * A reset of a PCI device will clear out its config space.
- * This routines will restore the config space for this
- * device, and is children, to values previously obtained
- * from the firmware.
- */
-void eeh_restore_bars(struct pci_dn *);
-
-/**
- * rtas_configure_bridge -- firmware initialization of pci bridge
- * @pdn: pci device node
- *
- * Ask the firmware to configure all PCI bridges devices
- * located behind the indicated node. Required after a
- * pci device reset. Does essentially the same hing as
- * eeh_restore_bars, but for brdges, and lets firmware
- * do the work.
- */
-void rtas_configure_bridge(struct pci_dn *);
-
+struct pci_dev *pci_addr_cache_get_device(unsigned long addr);
+void eeh_slot_error_detail(struct eeh_dev *edev, int severity);
+int eeh_pci_enable(struct eeh_dev *edev, int function);
+int eeh_reset_pe(struct eeh_dev *);
+void eeh_restore_bars(struct eeh_dev *);
int rtas_write_config(struct pci_dn *, int where, int size, u32 val);
int rtas_read_config(struct pci_dn *, int where, int size, u32 *val);
-
-/**
- * eeh_mark_slot -- set mode flags for pertition endpoint
- * @pdn: pci device node
- *
- * mark and clear slots: find "partition endpoint" PE and set or
- * clear the flags for each subnode of the PE.
- */
-void eeh_mark_slot (struct device_node *dn, int mode_flag);
-void eeh_clear_slot (struct device_node *dn, int mode_flag);
-
-/**
- * find_device_pe -- Find the associated "Partiationable Endpoint" PE
- * @pdn: pci device node
- */
-struct device_node * find_device_pe(struct device_node *dn);
+void eeh_mark_slot(struct device_node *dn, int mode_flag);
+void eeh_clear_slot(struct device_node *dn, int mode_flag);
+struct device_node *eeh_find_device_pe(struct device_node *dn);
void eeh_sysfs_add_device(struct pci_dev *pdev);
void eeh_sysfs_remove_device(struct pci_dev *pdev);
__pci_register_driver(driver, THIS_MODULE, KBUILD_MODNAME)
void pci_unregister_driver(struct pci_driver *dev);
- void pci_remove_behind_bridge(struct pci_dev *dev);
+
+/**
+ * module_pci_driver() - Helper macro for registering a PCI driver
+ * @__pci_driver: pci_driver struct
+ *
+ * Helper macro for PCI drivers which do not do anything special in module
+ * init/exit. This eliminates a lot of boilerplate. Each module may only
+ * use this macro once, and calling it replaces module_init() and module_exit()
+ */
+#define module_pci_driver(__pci_driver) \
+ module_driver(__pci_driver, pci_register_driver, \
+ pci_unregister_driver)
+
+ void pci_stop_and_remove_behind_bridge(struct pci_dev *dev);
struct pci_driver *pci_dev_driver(const struct pci_dev *dev);
int pci_add_dynid(struct pci_driver *drv,
unsigned int vendor, unsigned int device,