__le32 brpt_addr;
};
+/* SDIO read frame info */
+struct brcmf_sdio_read {
+ u8 seq_num;
+ u8 channel;
+ u16 len;
+ u16 len_left;
+ u16 len_nxtfrm;
+ u8 dat_offset;
+};
/* misc chip info needed by some of the routines */
/* Private data for SDIO bus interaction */
u8 hdrbuf[MAX_HDR_READ + BRCMF_SDALIGN];
u8 *rxhdr; /* Header of current rx frame (in hdrbuf) */
- u16 nextlen; /* Next Read Len from last header */
u8 rx_seq; /* Receive sequence number (expected) */
+ struct brcmf_sdio_read cur_read;
+ /* info of current read frame */
bool rxskip; /* Skip receive (awaiting NAK ACK) */
+ bool rxpending; /* Data frame pending in dongle */
uint rxbound; /* Rx frames to read before resched */
uint txbound; /* Tx frames to send before resched */
bool rxflow_mode; /* Rx flow control mode */
bool rxflow; /* Is rx flow control on */
bool alp_only; /* Don't use HT clock (ALP only) */
-/* Field to decide if rx of control frames happen in rxbuf or lb-pool */
- bool usebufpool;
u8 *ctrl_frame_buf;
u32 ctrl_frame_len;
#define HOSTINTMASK (I_HMB_SW_MASK | I_CHIPACTIVE)
-/* Packet free applicable unconditionally for sdio and sdspi.
- * Conditional if bufpool was present for gspi bus.
- */
-static void brcmf_sdbrcm_pktfree2(struct brcmf_sdio *bus, struct sk_buff *pkt)
-{
- if (bus->usebufpool)
- brcmu_pkt_buf_free_skb(pkt);
-}
-
/* Turn backplane clock on or off */
static int brcmf_sdbrcm_htclk(struct brcmf_sdio *bus, bool on, bool pendok)
{
}
/* Clear partial in any case */
- bus->nextlen = 0;
+ bus->cur_read.len = 0;
/* If we can't reach the device, signal failure */
if (err)
}
}
+static bool brcmf_sdio_hdparser(struct brcmf_sdio *bus, u8 *header,
+ struct brcmf_sdio_read *rd)
+{
+ u16 len, checksum;
+ u8 rx_seq, fc, tx_seq_max;
+
+ /*
+ * 4 bytes hardware header (frame tag)
+ * Byte 0~1: Frame length
+ * Byte 2~3: Checksum, bit-wise inverse of frame length
+ */
+ len = get_unaligned_le16(header);
+ checksum = get_unaligned_le16(header + sizeof(u16));
+ /* All zero means no more to read */
+ if (!(len | checksum)) {
+ bus->rxpending = false;
+ return false;
+ }
+ if ((u16)(~(len ^ checksum))) {
+ brcmf_dbg(ERROR, "HW header checksum error\n");
+ bus->sdcnt.rx_badhdr++;
+ brcmf_sdbrcm_rxfail(bus, false, false);
+ return false;
+ }
+ if (len < SDPCM_HDRLEN) {
+ brcmf_dbg(ERROR, "HW header length error\n");
+ return false;
+ }
+ rd->len = len;
+
+ /*
+ * 8 bytes hardware header
+ * Byte 0: Rx sequence number
+ * Byte 1: 4 MSB Channel number, 4 LSB arbitrary flag
+ * Byte 2: Length of next data frame
+ * Byte 3: Data offset
+ * Byte 4: Flow control bits
+ * Byte 5: Maximum Sequence number allow for Tx
+ * Byte 6~7: Reserved
+ */
+ rx_seq = SDPCM_PACKET_SEQUENCE(&header[SDPCM_FRAMETAG_LEN]);
+ rd->channel = SDPCM_PACKET_CHANNEL(&header[SDPCM_FRAMETAG_LEN]);
+ if (len > MAX_RX_DATASZ && rd->channel != SDPCM_CONTROL_CHANNEL) {
+ brcmf_dbg(ERROR, "HW header length too long\n");
+ bus->sdiodev->bus_if->dstats.rx_errors++;
+ bus->sdcnt.rx_toolong++;
+ brcmf_sdbrcm_rxfail(bus, false, false);
+ rd->len = 0;
+ return false;
+ }
+ rd->dat_offset = SDPCM_DOFFSET_VALUE(&header[SDPCM_FRAMETAG_LEN]);
+ if (rd->dat_offset < SDPCM_HDRLEN || rd->dat_offset > rd->len) {
+ brcmf_dbg(ERROR, "seq %d: bad data offset\n", rx_seq);
+ bus->sdcnt.rx_badhdr++;
+ brcmf_sdbrcm_rxfail(bus, false, false);
+ rd->len = 0;
+ return false;
+ }
+ if (rd->seq_num != rx_seq) {
+ brcmf_dbg(ERROR, "seq %d: sequence number error, expect %d\n",
+ rx_seq, rd->seq_num);
+ bus->sdcnt.rx_badseq++;
+ rd->seq_num = rx_seq;
+ }
+ rd->len_nxtfrm = header[SDPCM_FRAMETAG_LEN + SDPCM_NEXTLEN_OFFSET];
+ if (rd->len_nxtfrm << 4 > MAX_RX_DATASZ) {
+ /* only warm for NON glom packet */
+ if (rd->channel != SDPCM_GLOM_CHANNEL)
+ brcmf_dbg(ERROR, "seq %d: next length error\n", rx_seq);
+ rd->len_nxtfrm = 0;
+ }
+ fc = SDPCM_FCMASK_VALUE(&header[SDPCM_FRAMETAG_LEN]);
+ if (bus->flowcontrol != fc) {
+ if (~bus->flowcontrol & fc)
+ bus->sdcnt.fc_xoff++;
+ if (bus->flowcontrol & ~fc)
+ bus->sdcnt.fc_xon++;
+ bus->sdcnt.fc_rcvd++;
+ bus->flowcontrol = fc;
+ }
+ tx_seq_max = SDPCM_WINDOW_VALUE(&header[SDPCM_FRAMETAG_LEN]);
+ if ((u8)(tx_seq_max - bus->tx_seq) > 0x40) {
+ brcmf_dbg(ERROR, "seq %d: max tx seq number error\n", rx_seq);
+ tx_seq_max = bus->tx_seq + 2;
+ }
+ bus->tx_max = tx_seq_max;
+
+ return true;
+}
+
static u8 brcmf_sdbrcm_rxglom(struct brcmf_sdio *bus, u8 rxseq)
{
u16 dlen, totlen;
int ifidx = 0;
bool usechain = bus->use_rxchain;
+ u16 next_len;
/* If packets, issue read(s) and send up packet chain */
/* Return sequence numbers consumed? */
if (pnext) {
brcmf_dbg(GLOM, "allocated %d-byte packet chain for %d subframes\n",
totlen, num);
- if (BRCMF_GLOM_ON() && bus->nextlen &&
- totlen != bus->nextlen) {
+ if (BRCMF_GLOM_ON() && bus->cur_read.len &&
+ totlen != bus->cur_read.len) {
brcmf_dbg(GLOM, "glomdesc mismatch: nextlen %d glomdesc %d rxseq %d\n",
- bus->nextlen, totlen, rxseq);
+ bus->cur_read.len, totlen, rxseq);
}
pfirst = pnext = NULL;
} else {
/* Done with descriptor packet */
brcmu_pkt_buf_free_skb(bus->glomd);
bus->glomd = NULL;
- bus->nextlen = 0;
+ bus->cur_read.len = 0;
}
/* Ok -- either we just generated a packet chain,
chan = SDPCM_PACKET_CHANNEL(&dptr[SDPCM_FRAMETAG_LEN]);
seq = SDPCM_PACKET_SEQUENCE(&dptr[SDPCM_FRAMETAG_LEN]);
- bus->nextlen = dptr[SDPCM_FRAMETAG_LEN + SDPCM_NEXTLEN_OFFSET];
- if ((bus->nextlen << 4) > MAX_RX_DATASZ) {
+ next_len = dptr[SDPCM_FRAMETAG_LEN + SDPCM_NEXTLEN_OFFSET];
+ if ((next_len << 4) > MAX_RX_DATASZ) {
brcmf_dbg(INFO, "nextlen too large (%d) seq %d\n",
- bus->nextlen, seq);
- bus->nextlen = 0;
+ next_len, seq);
+ next_len = 0;
}
+ bus->cur_read.len = next_len << 4;
doff = SDPCM_DOFFSET_VALUE(&dptr[SDPCM_FRAMETAG_LEN]);
txmax = SDPCM_WINDOW_VALUE(&dptr[SDPCM_FRAMETAG_LEN]);
bus->sdcnt.rxglomfail++;
brcmf_sdbrcm_free_glom(bus);
}
- bus->nextlen = 0;
+ bus->cur_read.len = 0;
return 0;
}
}
}
-static void
-brcmf_alloc_pkt_and_read(struct brcmf_sdio *bus, u16 rdlen,
- struct sk_buff **pkt, u8 **rxbuf)
+static uint brcmf_sdio_readframes(struct brcmf_sdio *bus, uint maxframes)
{
- int sdret; /* Return code from calls */
-
- *pkt = brcmu_pkt_buf_get_skb(rdlen + BRCMF_SDALIGN);
- if (*pkt == NULL)
- return;
-
- pkt_align(*pkt, rdlen, BRCMF_SDALIGN);
- *rxbuf = (u8 *) ((*pkt)->data);
- /* Read the entire frame */
- sdret = brcmf_sdcard_recv_pkt(bus->sdiodev, bus->sdiodev->sbwad,
- SDIO_FUNC_2, F2SYNC, *pkt);
- bus->sdcnt.f2rxdata++;
-
- if (sdret < 0) {
- brcmf_dbg(ERROR, "(nextlen): read %d bytes failed: %d\n",
- rdlen, sdret);
- brcmu_pkt_buf_free_skb(*pkt);
- bus->sdiodev->bus_if->dstats.rx_errors++;
- /* Force retry w/normal header read.
- * Don't attempt NAK for
- * gSPI
- */
- brcmf_sdbrcm_rxfail(bus, true, true);
- *pkt = NULL;
- }
-}
-
-/* Checks the header */
-static int
-brcmf_check_rxbuf(struct brcmf_sdio *bus, struct sk_buff *pkt, u8 *rxbuf,
- u8 rxseq, u16 nextlen, u16 *len)
-{
- u16 check;
- bool len_consistent; /* Result of comparing readahead len and
- len from hw-hdr */
-
- memcpy(bus->rxhdr, rxbuf, SDPCM_HDRLEN);
-
- /* Extract hardware header fields */
- *len = get_unaligned_le16(bus->rxhdr);
- check = get_unaligned_le16(bus->rxhdr + sizeof(u16));
-
- /* All zeros means readahead info was bad */
- if (!(*len | check)) {
- brcmf_dbg(INFO, "(nextlen): read zeros in HW header???\n");
- goto fail;
- }
-
- /* Validate check bytes */
- if ((u16)~(*len ^ check)) {
- brcmf_dbg(ERROR, "(nextlen): HW hdr error: nextlen/len/check 0x%04x/0x%04x/0x%04x\n",
- nextlen, *len, check);
- bus->sdcnt.rx_badhdr++;
- brcmf_sdbrcm_rxfail(bus, false, false);
- goto fail;
- }
-
- /* Validate frame length */
- if (*len < SDPCM_HDRLEN) {
- brcmf_dbg(ERROR, "(nextlen): HW hdr length invalid: %d\n",
- *len);
- goto fail;
- }
-
- /* Check for consistency with readahead info */
- len_consistent = (nextlen != (roundup(*len, 16) >> 4));
- if (len_consistent) {
- /* Mismatch, force retry w/normal
- header (may be >4K) */
- brcmf_dbg(ERROR, "(nextlen): mismatch, nextlen %d len %d rnd %d; expected rxseq %d\n",
- nextlen, *len, roundup(*len, 16),
- rxseq);
- brcmf_sdbrcm_rxfail(bus, true, true);
- goto fail;
- }
-
- return 0;
-
-fail:
- brcmf_sdbrcm_pktfree2(bus, pkt);
- return -EINVAL;
-}
-
-/* Return true if there may be more frames to read */
-static uint
-brcmf_sdbrcm_readframes(struct brcmf_sdio *bus, uint maxframes, bool *finished)
-{
- u16 len, check; /* Extracted hardware header fields */
- u8 chan, seq, doff; /* Extracted software header fields */
- u8 fcbits; /* Extracted fcbits from software header */
-
struct sk_buff *pkt; /* Packet for event or data frames */
u16 pad; /* Number of pad bytes to read */
- u16 rdlen; /* Total number of bytes to read */
- u8 rxseq; /* Next sequence number to expect */
uint rxleft = 0; /* Remaining number of frames allowed */
int sdret; /* Return code from calls */
- u8 txmax; /* Maximum tx sequence offered */
- u8 *rxbuf;
int ifidx = 0;
uint rxcount = 0; /* Total frames read */
+ struct brcmf_sdio_read *rd = &bus->cur_read, rd_new;
+ u8 head_read = 0;
brcmf_dbg(TRACE, "Enter\n");
/* Not finished unless we encounter no more frames indication */
- *finished = false;
+ bus->rxpending = true;
- for (rxseq = bus->rx_seq, rxleft = maxframes;
+ for (rd->seq_num = bus->rx_seq, rxleft = maxframes;
!bus->rxskip && rxleft &&
bus->sdiodev->bus_if->state != BRCMF_BUS_DOWN;
- rxseq++, rxleft--) {
+ rd->seq_num++, rxleft--) {
/* Handle glomming separately */
if (bus->glomd || !skb_queue_empty(&bus->glom)) {
u8 cnt;
brcmf_dbg(GLOM, "calling rxglom: glomd %p, glom %p\n",
bus->glomd, skb_peek(&bus->glom));
- cnt = brcmf_sdbrcm_rxglom(bus, rxseq);
+ cnt = brcmf_sdbrcm_rxglom(bus, rd->seq_num);
brcmf_dbg(GLOM, "rxglom returned %d\n", cnt);
- rxseq += cnt - 1;
+ rd->seq_num += cnt - 1;
rxleft = (rxleft > cnt) ? (rxleft - cnt) : 1;
continue;
}
- /* Try doing single read if we can */
- if (bus->nextlen) {
- u16 nextlen = bus->nextlen;
- bus->nextlen = 0;
-
- rdlen = len = nextlen << 4;
- brcmf_pad(bus, &pad, &rdlen);
-
- /*
- * After the frame is received we have to
- * distinguish whether it is data
- * or non-data frame.
- */
- brcmf_alloc_pkt_and_read(bus, rdlen, &pkt, &rxbuf);
- if (pkt == NULL) {
- /* Give up on data, request rtx of events */
- brcmf_dbg(ERROR, "(nextlen): brcmf_alloc_pkt_and_read failed: len %d rdlen %d expected rxseq %d\n",
- len, rdlen, rxseq);
- continue;
- }
-
- if (brcmf_check_rxbuf(bus, pkt, rxbuf, rxseq, nextlen,
- &len) < 0)
+ rd->len_left = rd->len;
+ /* read header first for unknow frame length */
+ if (!rd->len) {
+ sdret = brcmf_sdcard_recv_buf(bus->sdiodev,
+ bus->sdiodev->sbwad,
+ SDIO_FUNC_2, F2SYNC,
+ bus->rxhdr,
+ BRCMF_FIRSTREAD);
+ bus->sdcnt.f2rxhdrs++;
+ if (sdret < 0) {
+ brcmf_dbg(ERROR, "RXHEADER FAILED: %d\n",
+ sdret);
+ bus->sdcnt.rx_hdrfail++;
+ brcmf_sdbrcm_rxfail(bus, true, true);
continue;
-
- /* Extract software header fields */
- chan = SDPCM_PACKET_CHANNEL(
- &bus->rxhdr[SDPCM_FRAMETAG_LEN]);
- seq = SDPCM_PACKET_SEQUENCE(
- &bus->rxhdr[SDPCM_FRAMETAG_LEN]);
- doff = SDPCM_DOFFSET_VALUE(
- &bus->rxhdr[SDPCM_FRAMETAG_LEN]);
- txmax = SDPCM_WINDOW_VALUE(
- &bus->rxhdr[SDPCM_FRAMETAG_LEN]);
-
- bus->nextlen =
- bus->rxhdr[SDPCM_FRAMETAG_LEN +
- SDPCM_NEXTLEN_OFFSET];
- if ((bus->nextlen << 4) > MAX_RX_DATASZ) {
- brcmf_dbg(INFO, "(nextlen): got frame w/nextlen too large (%d), seq %d\n",
- bus->nextlen, seq);
- bus->nextlen = 0;
}
- bus->sdcnt.rx_readahead_cnt++;
-
- /* Handle Flow Control */
- fcbits = SDPCM_FCMASK_VALUE(
- &bus->rxhdr[SDPCM_FRAMETAG_LEN]);
-
- if (bus->flowcontrol != fcbits) {
- if (~bus->flowcontrol & fcbits)
- bus->sdcnt.fc_xoff++;
-
- if (bus->flowcontrol & ~fcbits)
- bus->sdcnt.fc_xon++;
-
- bus->sdcnt.fc_rcvd++;
- bus->flowcontrol = fcbits;
- }
-
- /* Check and update sequence number */
- if (rxseq != seq) {
- brcmf_dbg(INFO, "(nextlen): rx_seq %d, expected %d\n",
- seq, rxseq);
- bus->sdcnt.rx_badseq++;
- rxseq = seq;
- }
-
- /* Check window for sanity */
- if ((u8) (txmax - bus->tx_seq) > 0x40) {
- brcmf_dbg(ERROR, "got unlikely tx max %d with tx_seq %d\n",
- txmax, bus->tx_seq);
- txmax = bus->tx_seq + 2;
- }
- bus->tx_max = txmax;
-
- brcmf_dbg_hex_dump(BRCMF_BYTES_ON() && BRCMF_DATA_ON(),
- rxbuf, len, "Rx Data:\n");
- brcmf_dbg_hex_dump(!(BRCMF_BYTES_ON() &&
- BRCMF_DATA_ON()) &&
- BRCMF_HDRS_ON(),
+ brcmf_dbg_hex_dump(BRCMF_BYTES_ON() || BRCMF_HDRS_ON(),
bus->rxhdr, SDPCM_HDRLEN,
"RxHdr:\n");
- if (chan == SDPCM_CONTROL_CHANNEL) {
- brcmf_dbg(ERROR, "(nextlen): readahead on control packet %d?\n",
- seq);
- /* Force retry w/normal header read */
- bus->nextlen = 0;
- brcmf_sdbrcm_rxfail(bus, false, true);
- brcmf_sdbrcm_pktfree2(bus, pkt);
- continue;
+ if (!brcmf_sdio_hdparser(bus, bus->rxhdr, rd)) {
+ if (!bus->rxpending)
+ break;
+ else
+ continue;
}
- /* Validate data offset */
- if ((doff < SDPCM_HDRLEN) || (doff > len)) {
- brcmf_dbg(ERROR, "(nextlen): bad data offset %d: HW len %d min %d\n",
- doff, len, SDPCM_HDRLEN);
- brcmf_sdbrcm_rxfail(bus, false, false);
- brcmf_sdbrcm_pktfree2(bus, pkt);
+ if (rd->channel == SDPCM_CONTROL_CHANNEL) {
+ brcmf_sdbrcm_read_control(bus, bus->rxhdr,
+ rd->len,
+ rd->dat_offset);
+ /* prepare the descriptor for the next read */
+ rd->len = rd->len_nxtfrm << 4;
+ rd->len_nxtfrm = 0;
+ /* treat all packet as event if we don't know */
+ rd->channel = SDPCM_EVENT_CHANNEL;
continue;
}
-
- /* All done with this one -- now deliver the packet */
- goto deliver;
- }
-
- /* Read frame header (hardware and software) */
- sdret = brcmf_sdcard_recv_buf(bus->sdiodev, bus->sdiodev->sbwad,
- SDIO_FUNC_2, F2SYNC, bus->rxhdr,
- BRCMF_FIRSTREAD);
- bus->sdcnt.f2rxhdrs++;
-
- if (sdret < 0) {
- brcmf_dbg(ERROR, "RXHEADER FAILED: %d\n", sdret);
- bus->sdcnt.rx_hdrfail++;
- brcmf_sdbrcm_rxfail(bus, true, true);
- continue;
- }
- brcmf_dbg_hex_dump(BRCMF_BYTES_ON() || BRCMF_HDRS_ON(),
- bus->rxhdr, SDPCM_HDRLEN, "RxHdr:\n");
-
-
- /* Extract hardware header fields */
- len = get_unaligned_le16(bus->rxhdr);
- check = get_unaligned_le16(bus->rxhdr + sizeof(u16));
-
- /* All zeros means no more frames */
- if (!(len | check)) {
- *finished = true;
- break;
- }
-
- /* Validate check bytes */
- if ((u16) ~(len ^ check)) {
- brcmf_dbg(ERROR, "HW hdr err: len/check 0x%04x/0x%04x\n",
- len, check);
- bus->sdcnt.rx_badhdr++;
- brcmf_sdbrcm_rxfail(bus, false, false);
- continue;
- }
-
- /* Validate frame length */
- if (len < SDPCM_HDRLEN) {
- brcmf_dbg(ERROR, "HW hdr length invalid: %d\n", len);
- continue;
- }
-
- /* Extract software header fields */
- chan = SDPCM_PACKET_CHANNEL(&bus->rxhdr[SDPCM_FRAMETAG_LEN]);
- seq = SDPCM_PACKET_SEQUENCE(&bus->rxhdr[SDPCM_FRAMETAG_LEN]);
- doff = SDPCM_DOFFSET_VALUE(&bus->rxhdr[SDPCM_FRAMETAG_LEN]);
- txmax = SDPCM_WINDOW_VALUE(&bus->rxhdr[SDPCM_FRAMETAG_LEN]);
-
- /* Validate data offset */
- if ((doff < SDPCM_HDRLEN) || (doff > len)) {
- brcmf_dbg(ERROR, "Bad data offset %d: HW len %d, min %d seq %d\n",
- doff, len, SDPCM_HDRLEN, seq);
- bus->sdcnt.rx_badhdr++;
- brcmf_sdbrcm_rxfail(bus, false, false);
- continue;
- }
-
- /* Save the readahead length if there is one */
- bus->nextlen =
- bus->rxhdr[SDPCM_FRAMETAG_LEN + SDPCM_NEXTLEN_OFFSET];
- if ((bus->nextlen << 4) > MAX_RX_DATASZ) {
- brcmf_dbg(INFO, "(nextlen): got frame w/nextlen too large (%d), seq %d\n",
- bus->nextlen, seq);
- bus->nextlen = 0;
- }
-
- /* Handle Flow Control */
- fcbits = SDPCM_FCMASK_VALUE(&bus->rxhdr[SDPCM_FRAMETAG_LEN]);
-
- if (bus->flowcontrol != fcbits) {
- if (~bus->flowcontrol & fcbits)
- bus->sdcnt.fc_xoff++;
-
- if (bus->flowcontrol & ~fcbits)
- bus->sdcnt.fc_xon++;
-
- bus->sdcnt.fc_rcvd++;
- bus->flowcontrol = fcbits;
- }
-
- /* Check and update sequence number */
- if (rxseq != seq) {
- brcmf_dbg(INFO, "rx_seq %d, expected %d\n", seq, rxseq);
- bus->sdcnt.rx_badseq++;
- rxseq = seq;
+ rd->len_left = rd->len > BRCMF_FIRSTREAD ?
+ rd->len - BRCMF_FIRSTREAD : 0;
+ head_read = BRCMF_FIRSTREAD;
}
- /* Check window for sanity */
- if ((u8) (txmax - bus->tx_seq) > 0x40) {
- brcmf_dbg(ERROR, "unlikely tx max %d with tx_seq %d\n",
- txmax, bus->tx_seq);
- txmax = bus->tx_seq + 2;
- }
- bus->tx_max = txmax;
+ brcmf_pad(bus, &pad, &rd->len_left);
- /* Call a separate function for control frames */
- if (chan == SDPCM_CONTROL_CHANNEL) {
- brcmf_sdbrcm_read_control(bus, bus->rxhdr, len, doff);
- continue;
- }
-
- /* precondition: chan is either SDPCM_DATA_CHANNEL,
- SDPCM_EVENT_CHANNEL, SDPCM_TEST_CHANNEL or
- SDPCM_GLOM_CHANNEL */
-
- /* Length to read */
- rdlen = (len > BRCMF_FIRSTREAD) ? (len - BRCMF_FIRSTREAD) : 0;
-
- /* May pad read to blocksize for efficiency */
- if (bus->roundup && bus->blocksize &&
- (rdlen > bus->blocksize)) {
- pad = bus->blocksize - (rdlen % bus->blocksize);
- if ((pad <= bus->roundup) && (pad < bus->blocksize) &&
- ((rdlen + pad + BRCMF_FIRSTREAD) < MAX_RX_DATASZ))
- rdlen += pad;
- } else if (rdlen % BRCMF_SDALIGN) {
- rdlen += BRCMF_SDALIGN - (rdlen % BRCMF_SDALIGN);
- }
-
- /* Satisfy length-alignment requirements */
- if (rdlen & (ALIGNMENT - 1))
- rdlen = roundup(rdlen, ALIGNMENT);
-
- if ((rdlen + BRCMF_FIRSTREAD) > MAX_RX_DATASZ) {
- /* Too long -- skip this frame */
- brcmf_dbg(ERROR, "too long: len %d rdlen %d\n",
- len, rdlen);
- bus->sdiodev->bus_if->dstats.rx_errors++;
- bus->sdcnt.rx_toolong++;
- brcmf_sdbrcm_rxfail(bus, false, false);
- continue;
- }
-
- pkt = brcmu_pkt_buf_get_skb(rdlen +
- BRCMF_FIRSTREAD + BRCMF_SDALIGN);
+ pkt = brcmu_pkt_buf_get_skb(rd->len_left + head_read +
+ BRCMF_SDALIGN);
if (!pkt) {
/* Give up on data, request rtx of events */
- brcmf_dbg(ERROR, "brcmu_pkt_buf_get_skb failed: rdlen %d chan %d\n",
- rdlen, chan);
+ brcmf_dbg(ERROR, "brcmu_pkt_buf_get_skb failed\n");
bus->sdiodev->bus_if->dstats.rx_dropped++;
- brcmf_sdbrcm_rxfail(bus, false, RETRYCHAN(chan));
+ brcmf_sdbrcm_rxfail(bus, false,
+ RETRYCHAN(rd->channel));
continue;
}
+ skb_pull(pkt, head_read);
+ pkt_align(pkt, rd->len_left, BRCMF_SDALIGN);
- /* Leave room for what we already read, and align remainder */
- skb_pull(pkt, BRCMF_FIRSTREAD);
- pkt_align(pkt, rdlen, BRCMF_SDALIGN);
-
- /* Read the remaining frame data */
sdret = brcmf_sdcard_recv_pkt(bus->sdiodev, bus->sdiodev->sbwad,
SDIO_FUNC_2, F2SYNC, pkt);
bus->sdcnt.f2rxdata++;
if (sdret < 0) {
- brcmf_dbg(ERROR, "read %d %s bytes failed: %d\n", rdlen,
- ((chan == SDPCM_EVENT_CHANNEL) ? "event"
- : ((chan == SDPCM_DATA_CHANNEL) ? "data"
- : "test")), sdret);
+ brcmf_dbg(ERROR, "read %d bytes from channel %d failed: %d\n",
+ rd->len, rd->channel, sdret);
brcmu_pkt_buf_free_skb(pkt);
bus->sdiodev->bus_if->dstats.rx_errors++;
- brcmf_sdbrcm_rxfail(bus, true, RETRYCHAN(chan));
+ brcmf_sdbrcm_rxfail(bus, true,
+ RETRYCHAN(rd->channel));
continue;
}
- /* Copy the already-read portion */
- skb_push(pkt, BRCMF_FIRSTREAD);
- memcpy(pkt->data, bus->rxhdr, BRCMF_FIRSTREAD);
+ if (head_read) {
+ skb_push(pkt, head_read);
+ memcpy(pkt->data, bus->rxhdr, head_read);
+ head_read = 0;
+ } else {
+ memcpy(bus->rxhdr, pkt->data, SDPCM_HDRLEN);
+ rd_new.seq_num = rd->seq_num;
+ if (!brcmf_sdio_hdparser(bus, bus->rxhdr, &rd_new)) {
+ rd->len = 0;
+ brcmu_pkt_buf_free_skb(pkt);
+ }
+ bus->sdcnt.rx_readahead_cnt++;
+ if (rd->len != roundup(rd_new.len, 16)) {
+ brcmf_dbg(ERROR, "frame length mismatch:read %d, should be %d\n",
+ rd->len,
+ roundup(rd_new.len, 16) >> 4);
+ rd->len = 0;
+ brcmf_sdbrcm_rxfail(bus, true, true);
+ brcmu_pkt_buf_free_skb(pkt);
+ continue;
+ }
+ rd->len_nxtfrm = rd_new.len_nxtfrm;
+ rd->channel = rd_new.channel;
+ rd->dat_offset = rd_new.dat_offset;
+
+ brcmf_dbg_hex_dump(!(BRCMF_BYTES_ON() &&
+ BRCMF_DATA_ON()) &&
+ BRCMF_HDRS_ON(),
+ bus->rxhdr, SDPCM_HDRLEN,
+ "RxHdr:\n");
+
+ if (rd_new.channel == SDPCM_CONTROL_CHANNEL) {
+ brcmf_dbg(ERROR, "readahead on control packet %d?\n",
+ rd_new.seq_num);
+ /* Force retry w/normal header read */
+ rd->len = 0;
+ brcmf_sdbrcm_rxfail(bus, false, true);
+ brcmu_pkt_buf_free_skb(pkt);
+ continue;
+ }
+ }
brcmf_dbg_hex_dump(BRCMF_BYTES_ON() && BRCMF_DATA_ON(),
- pkt->data, len, "Rx Data:\n");
+ pkt->data, rd->len, "Rx Data:\n");
-deliver:
/* Save superframe descriptor and allocate packet frame */
- if (chan == SDPCM_GLOM_CHANNEL) {
+ if (rd->channel == SDPCM_GLOM_CHANNEL) {
if (SDPCM_GLOMDESC(&bus->rxhdr[SDPCM_FRAMETAG_LEN])) {
brcmf_dbg(GLOM, "glom descriptor, %d bytes:\n",
- len);
+ rd->len);
brcmf_dbg_hex_dump(BRCMF_GLOM_ON(),
- pkt->data, len,
+ pkt->data, rd->len,
"Glom Data:\n");
- __skb_trim(pkt, len);
+ __skb_trim(pkt, rd->len);
skb_pull(pkt, SDPCM_HDRLEN);
bus->glomd = pkt;
} else {
"descriptor!\n", __func__);
brcmf_sdbrcm_rxfail(bus, false, false);
}
+ /* prepare the descriptor for the next read */
+ rd->len = rd->len_nxtfrm << 4;
+ rd->len_nxtfrm = 0;
+ /* treat all packet as event if we don't know */
+ rd->channel = SDPCM_EVENT_CHANNEL;
continue;
}
/* Fill in packet len and prio, deliver upward */
- __skb_trim(pkt, len);
- skb_pull(pkt, doff);
+ __skb_trim(pkt, rd->len);
+ skb_pull(pkt, rd->dat_offset);
+
+ /* prepare the descriptor for the next read */
+ rd->len = rd->len_nxtfrm << 4;
+ rd->len_nxtfrm = 0;
+ /* treat all packet as event if we don't know */
+ rd->channel = SDPCM_EVENT_CHANNEL;
if (pkt->len == 0) {
brcmu_pkt_buf_free_skb(pkt);
brcmf_rx_packet(bus->sdiodev->dev, ifidx, pkt);
down(&bus->sdsem);
}
+
rxcount = maxframes - rxleft;
/* Message if we hit the limit */
if (!rxleft)
- brcmf_dbg(DATA, "hit rx limit of %d frames\n",
- maxframes);
+ brcmf_dbg(DATA, "hit rx limit of %d frames\n", maxframes);
else
brcmf_dbg(DATA, "processed %d frames\n", rxcount);
/* Back off rxseq if awaiting rtx, update rx_seq */
if (bus->rxskip)
- rxseq--;
- bus->rx_seq = rxseq;
+ rd->seq_num--;
+ bus->rx_seq = rd->seq_num;
return rxcount;
}
uint rxlimit = bus->rxbound; /* Rx frames to read before resched */
uint txlimit = bus->txbound; /* Tx frames to send before resched */
uint framecnt = 0; /* Temporary counter of tx/rx frames */
- bool rxdone = true; /* Flag for no more read data */
int err = 0, n;
brcmf_dbg(TRACE, "Enter\n");
/* On frame indication, read available frames */
if (PKT_AVAILABLE() && bus->clkstate == CLK_AVAIL) {
- framecnt = brcmf_sdbrcm_readframes(bus, rxlimit, &rxdone);
- if (rxdone || bus->rxskip)
+ framecnt = brcmf_sdio_readframes(bus, rxlimit);
+ if (!bus->rxpending)
intstatus &= ~I_HMB_FRAME_IND;
rxlimit -= min(framecnt, rxlimit);
}
else if ((bus->clkstate == CLK_AVAIL) && !atomic_read(&bus->fcstate) &&
brcmu_pktq_mlen(&bus->txq, ~bus->flowcontrol) && txlimit
&& data_ok(bus)) {
- framecnt = rxdone ? txlimit : min(txlimit, bus->txminmax);
+ framecnt = bus->rxpending ? min(txlimit, bus->txminmax) :
+ txlimit;
framecnt = brcmf_sdbrcm_sendfromq(bus, framecnt);
txlimit -= framecnt;
}
bus->rxbound = BRCMF_RXBOUND;
bus->txminmax = BRCMF_TXMINMAX;
bus->tx_seq = SDPCM_SEQUENCE_WRAP - 1;
- bus->usebufpool = false; /* Use bufpool if allocated,
- else use locally malloced rxbuf */
/* attempt to attach to the dongle */
if (!(brcmf_sdbrcm_probe_attach(bus, regsva))) {
projects / platform / upstream / kernel-adaptation-pc.git / commitdiff