sta_priv = (void *)sta->drv_priv;
if (sta_priv && sta_priv->asleep &&
- (info->flags & IEEE80211_TX_CTL_PSPOLL_RESPONSE)) {
+ (info->flags & IEEE80211_TX_CTL_POLL_RESPONSE)) {
/*
* This sends an asynchronous command to the device,
* but we can rely on it being processed before the
sta_priv = (void *)info->control.sta->drv_priv;
if (sta_priv && sta_priv->asleep &&
- (info->flags & IEEE80211_TX_CTL_PSPOLL_RESPONSE)) {
+ (info->flags & IEEE80211_TX_CTL_POLL_RESPONSE)) {
/*
* This sends an asynchronous command to the device,
* but we can rely on it being processed before the
if (!(info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ))
*flags |= P54_HDR_FLAG_DATA_OUT_SEQNR;
- if (info->flags & IEEE80211_TX_CTL_PSPOLL_RESPONSE)
+ if (info->flags & IEEE80211_TX_CTL_POLL_RESPONSE)
*flags |= P54_HDR_FLAG_DATA_OUT_NOCANCEL;
if (info->flags & IEEE80211_TX_CTL_CLEAR_PS_FILT)
* used to indicate that a frame was already retried due to PS
* @IEEE80211_TX_INTFL_DONT_ENCRYPT: completely internal to mac80211,
* used to indicate frame should not be encrypted
- * @IEEE80211_TX_CTL_PSPOLL_RESPONSE: (internal?)
- * This frame is a response to a PS-poll frame and should be sent
- * although the station is in powersave mode.
+ * @IEEE80211_TX_CTL_POLL_RESPONSE: This frame is a response to a poll
+ * frame (PS-Poll or uAPSD) and should be sent although the station
+ * is in powersave mode.
* @IEEE80211_TX_CTL_MORE_FRAMES: More frames will be passed to the
* transmit function after the current frame, this can be used
* by drivers to kick the DMA queue only if unset or when the
* @IEEE80211_TX_CTL_NO_CCK_RATE: This frame will be sent at non CCK rate.
* This flag is actually used for management frame especially for P2P
* frames not being sent at CCK rate in 2GHz band.
+ * @IEEE80211_TX_STATUS_EOSP: This packet marks the end of service period,
+ * when its status is reported the service period ends. For frames in
+ * an SP that mac80211 transmits, it is already set; for driver frames
+ * the driver may set this flag.
*
* Note: If you have to add new flags to the enumeration, then don't
* forget to update %IEEE80211_TX_TEMPORARY_FLAGS when necessary.
IEEE80211_TX_INTFL_NEED_TXPROCESSING = BIT(14),
IEEE80211_TX_INTFL_RETRIED = BIT(15),
IEEE80211_TX_INTFL_DONT_ENCRYPT = BIT(16),
- IEEE80211_TX_CTL_PSPOLL_RESPONSE = BIT(17),
+ IEEE80211_TX_CTL_POLL_RESPONSE = BIT(17),
IEEE80211_TX_CTL_MORE_FRAMES = BIT(18),
IEEE80211_TX_INTFL_RETRANSMISSION = BIT(19),
IEEE80211_TX_INTFL_HAS_RADIOTAP = BIT(20),
IEEE80211_TX_CTL_TX_OFFCHAN = BIT(25),
IEEE80211_TX_INTFL_TKIP_MIC_FAILURE = BIT(26),
IEEE80211_TX_CTL_NO_CCK_RATE = BIT(27),
+ IEEE80211_TX_STATUS_EOSP = BIT(28),
};
#define IEEE80211_TX_CTL_STBC_SHIFT 23
IEEE80211_TX_CTL_SEND_AFTER_DTIM | IEEE80211_TX_CTL_AMPDU | \
IEEE80211_TX_STAT_TX_FILTERED | IEEE80211_TX_STAT_ACK | \
IEEE80211_TX_STAT_AMPDU | IEEE80211_TX_STAT_AMPDU_NO_BACK | \
- IEEE80211_TX_CTL_RATE_CTRL_PROBE | IEEE80211_TX_CTL_PSPOLL_RESPONSE | \
+ IEEE80211_TX_CTL_RATE_CTRL_PROBE | IEEE80211_TX_CTL_POLL_RESPONSE | \
IEEE80211_TX_CTL_MORE_FRAMES | IEEE80211_TX_CTL_LDPC | \
- IEEE80211_TX_CTL_STBC)
+ IEEE80211_TX_CTL_STBC | IEEE80211_TX_STATUS_EOSP)
/**
* enum mac80211_rate_control_flags - per-rate flags set by the
/**
* enum ieee80211_frame_release_type - frame release reason
* @IEEE80211_FRAME_RELEASE_PSPOLL: frame released for PS-Poll
+ * @IEEE80211_FRAME_RELEASE_UAPSD: frame(s) released due to
+ * frame received on trigger-enabled AC
*/
enum ieee80211_frame_release_type {
IEEE80211_FRAME_RELEASE_PSPOLL,
+ IEEE80211_FRAME_RELEASE_UAPSD,
};
/**
* In the case this is used for uAPSD, the @num_frames parameter may be
* bigger than one, but the driver may send fewer frames (it must send
* at least one, however). In this case it is also responsible for
- * setting the EOSP flag in the QoS header of the frames.
+ * setting the EOSP flag in the QoS header of the frames. Also, when the
+ * service period ends, the driver must set %IEEE80211_TX_STATUS_EOSP
+ * on the last frame in the SP.
* This callback must be atomic.
*/
struct ieee80211_ops {
EXPORT_SYMBOL(ieee80211_sta_ps_transition);
static ieee80211_rx_result debug_noinline
+ieee80211_rx_h_uapsd_and_pspoll(struct ieee80211_rx_data *rx)
+{
+ struct ieee80211_sub_if_data *sdata = rx->sdata;
+ struct ieee80211_hdr *hdr = (void *)rx->skb->data;
+ struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(rx->skb);
+ int tid, ac;
+
+ if (!rx->sta || !(status->rx_flags & IEEE80211_RX_RA_MATCH))
+ return RX_CONTINUE;
+
+ if (sdata->vif.type != NL80211_IFTYPE_AP &&
+ sdata->vif.type != NL80211_IFTYPE_AP_VLAN)
+ return RX_CONTINUE;
+
+ /*
+ * The device handles station powersave, so don't do anything about
+ * uAPSD and PS-Poll frames (the latter shouldn't even come up from
+ * it to mac80211 since they're handled.)
+ */
+ if (sdata->local->hw.flags & IEEE80211_HW_AP_LINK_PS)
+ return RX_CONTINUE;
+
+ /*
+ * Don't do anything if the station isn't already asleep. In
+ * the uAPSD case, the station will probably be marked asleep,
+ * in the PS-Poll case the station must be confused ...
+ */
+ if (!test_sta_flags(rx->sta, WLAN_STA_PS_STA))
+ return RX_CONTINUE;
+
+ if (unlikely(ieee80211_is_pspoll(hdr->frame_control))) {
+ if (!test_sta_flags(rx->sta, WLAN_STA_PS_DRIVER))
+ ieee80211_sta_ps_deliver_poll_response(rx->sta);
+ else
+ set_sta_flags(rx->sta, WLAN_STA_PSPOLL);
+
+ /* Free PS Poll skb here instead of returning RX_DROP that would
+ * count as an dropped frame. */
+ dev_kfree_skb(rx->skb);
+
+ return RX_QUEUED;
+ } else if (!ieee80211_has_morefrags(hdr->frame_control) &&
+ !(status->rx_flags & IEEE80211_RX_DEFERRED_RELEASE) &&
+ ieee80211_has_pm(hdr->frame_control) &&
+ (ieee80211_is_data_qos(hdr->frame_control) ||
+ ieee80211_is_qos_nullfunc(hdr->frame_control))) {
+ tid = *ieee80211_get_qos_ctl(hdr) & IEEE80211_QOS_CTL_TID_MASK;
+ ac = ieee802_1d_to_ac[tid & 7];
+
+ /*
+ * If this AC is not trigger-enabled do nothing.
+ *
+ * NB: This could/should check a separate bitmap of trigger-
+ * enabled queues, but for now we only implement uAPSD w/o
+ * TSPEC changes to the ACs, so they're always the same.
+ */
+ if (!(rx->sta->sta.uapsd_queues & BIT(ac)))
+ return RX_CONTINUE;
+
+ /* if we are in a service period, do nothing */
+ if (test_sta_flags(rx->sta, WLAN_STA_SP))
+ return RX_CONTINUE;
+
+ if (!test_sta_flags(rx->sta, WLAN_STA_PS_DRIVER))
+ ieee80211_sta_ps_deliver_uapsd(rx->sta);
+ else
+ set_sta_flags(rx->sta, WLAN_STA_UAPSD);
+ }
+
+ return RX_CONTINUE;
+}
+
+static ieee80211_rx_result debug_noinline
ieee80211_rx_h_sta_process(struct ieee80211_rx_data *rx)
{
struct sta_info *sta = rx->sta;
}
static ieee80211_rx_result debug_noinline
-ieee80211_rx_h_ps_poll(struct ieee80211_rx_data *rx)
-{
- struct ieee80211_sub_if_data *sdata = rx->sdata;
- __le16 fc = ((struct ieee80211_hdr *)rx->skb->data)->frame_control;
- struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(rx->skb);
-
- if (likely(!rx->sta || !ieee80211_is_pspoll(fc) ||
- !(status->rx_flags & IEEE80211_RX_RA_MATCH)))
- return RX_CONTINUE;
-
- if ((sdata->vif.type != NL80211_IFTYPE_AP) &&
- (sdata->vif.type != NL80211_IFTYPE_AP_VLAN))
- return RX_DROP_UNUSABLE;
-
- if (!test_sta_flags(rx->sta, WLAN_STA_PS_DRIVER))
- ieee80211_sta_ps_deliver_poll_response(rx->sta);
- else
- set_sta_flags(rx->sta, WLAN_STA_PSPOLL);
-
- /* Free PS Poll skb here instead of returning RX_DROP that would
- * count as an dropped frame. */
- dev_kfree_skb(rx->skb);
-
- return RX_QUEUED;
-}
-
-static ieee80211_rx_result debug_noinline
ieee80211_rx_h_remove_qos_control(struct ieee80211_rx_data *rx)
{
u8 *data = rx->skb->data;
CALL_RXH(ieee80211_rx_h_decrypt)
CALL_RXH(ieee80211_rx_h_check_more_data)
+ CALL_RXH(ieee80211_rx_h_uapsd_and_pspoll)
CALL_RXH(ieee80211_rx_h_sta_process)
CALL_RXH(ieee80211_rx_h_defragment)
- CALL_RXH(ieee80211_rx_h_ps_poll)
CALL_RXH(ieee80211_rx_h_michael_mic_verify)
/* must be after MMIC verify so header is counted in MPDU mic */
#ifdef CONFIG_MAC80211_MESH
else if (test_and_clear_sta_flags(sta, WLAN_STA_PSPOLL)) {
clear_sta_flags(sta, WLAN_STA_PS_DRIVER);
ieee80211_sta_ps_deliver_poll_response(sta);
+ } else if (test_and_clear_sta_flags(sta, WLAN_STA_UAPSD)) {
+ clear_sta_flags(sta, WLAN_STA_PS_DRIVER);
+ ieee80211_sta_ps_deliver_uapsd(sta);
} else
clear_sta_flags(sta, WLAN_STA_PS_DRIVER);
}
struct sk_buff_head pending;
int filtered = 0, buffered = 0, ac;
+ clear_sta_flags(sta, WLAN_STA_SP);
+
BUILD_BUG_ON(BITS_TO_LONGS(STA_TID_NUM) > 1);
sta->driver_buffered_tids = 0;
#endif /* CONFIG_MAC80211_VERBOSE_PS_DEBUG */
}
-void ieee80211_sta_ps_deliver_poll_response(struct sta_info *sta)
+static void
+ieee80211_sta_ps_deliver_response(struct sta_info *sta,
+ int n_frames, u8 ignored_acs,
+ enum ieee80211_frame_release_type reason)
{
struct ieee80211_sub_if_data *sdata = sta->sdata;
struct ieee80211_local *local = sdata->local;
- struct sk_buff *skb = NULL;
bool found = false;
bool more_data = false;
int ac;
unsigned long driver_release_tids = 0;
- u8 ignore_for_response = sta->sta.uapsd_queues;
+ struct sk_buff_head frames;
- /*
- * If all ACs are delivery-enabled then we should reply
- * from any of them, if only some are enabled we reply
- * only from the non-enabled ones.
- */
- if (ignore_for_response == BIT(IEEE80211_NUM_ACS) - 1)
- ignore_for_response = 0;
+ __skb_queue_head_init(&frames);
/*
- * Get response frame and more data bit for it.
+ * Get response frame(s) and more data bit for it.
*/
for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) {
unsigned long tids;
- if (ignore_for_response & BIT(ac))
+ if (ignored_acs & BIT(ac))
continue;
tids = ieee80211_tids_for_ac(ac);
if (driver_release_tids) {
found = true;
} else {
- skb = skb_dequeue(&sta->tx_filtered[ac]);
- if (!skb) {
- skb = skb_dequeue(&sta->ps_tx_buf[ac]);
- if (skb)
- local->total_ps_buffered--;
- }
- if (skb)
+ struct sk_buff *skb;
+
+ while (n_frames > 0) {
+ skb = skb_dequeue(&sta->tx_filtered[ac]);
+ if (!skb) {
+ skb = skb_dequeue(
+ &sta->ps_tx_buf[ac]);
+ if (skb)
+ local->total_ps_buffered--;
+ }
+ if (!skb)
+ break;
+ n_frames--;
found = true;
+ __skb_queue_tail(&frames, skb);
+ }
}
/*
* certainly there's more data if we release just a
* single frame now (from a single TID).
*/
- if (hweight16(driver_release_tids) > 1) {
+ if (reason == IEEE80211_FRAME_RELEASE_PSPOLL &&
+ hweight16(driver_release_tids) > 1) {
more_data = true;
driver_release_tids =
BIT(ffs(driver_release_tids) - 1);
* Should we send it a null-func frame indicating we
* have nothing buffered for it?
*/
- printk(KERN_DEBUG "%s: STA %pM sent PS Poll even "
- "though there are no buffered frames for it\n",
- sdata->name, sta->sta.addr);
+ if (reason == IEEE80211_FRAME_RELEASE_PSPOLL)
+ printk(KERN_DEBUG "%s: STA %pM sent PS Poll even "
+ "though there are no buffered frames for it\n",
+ sdata->name, sta->sta.addr);
#endif /* CONFIG_MAC80211_VERBOSE_PS_DEBUG */
return;
}
- if (skb) {
- struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
- struct ieee80211_hdr *hdr =
- (struct ieee80211_hdr *) skb->data;
+ if (!driver_release_tids) {
+ struct sk_buff_head pending;
+ struct sk_buff *skb;
- /*
- * Tell TX path to send this frame even though the STA may
- * still remain is PS mode after this frame exchange.
- */
- info->flags |= IEEE80211_TX_CTL_PSPOLL_RESPONSE;
+ skb_queue_head_init(&pending);
-#ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG
- printk(KERN_DEBUG "STA %pM aid %d: PS Poll\n",
- sta->sta.addr, sta->sta.aid);
-#endif /* CONFIG_MAC80211_VERBOSE_PS_DEBUG */
+ while ((skb = __skb_dequeue(&frames))) {
+ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+ struct ieee80211_hdr *hdr = (void *) skb->data;
- /* Use MoreData flag to indicate whether there are more
- * buffered frames for this STA */
- if (!more_data)
- hdr->frame_control &= cpu_to_le16(~IEEE80211_FCTL_MOREDATA);
- else
- hdr->frame_control |= cpu_to_le16(IEEE80211_FCTL_MOREDATA);
+ /*
+ * Tell TX path to send this frame even though the
+ * STA may still remain is PS mode after this frame
+ * exchange.
+ */
+ info->flags |= IEEE80211_TX_CTL_POLL_RESPONSE;
+
+ /*
+ * Use MoreData flag to indicate whether there are
+ * more buffered frames for this STA
+ */
+ if (!more_data)
+ hdr->frame_control &=
+ cpu_to_le16(~IEEE80211_FCTL_MOREDATA);
+ else
+ hdr->frame_control |=
+ cpu_to_le16(IEEE80211_FCTL_MOREDATA);
+
+ if (reason == IEEE80211_FRAME_RELEASE_UAPSD &&
+ skb_queue_empty(&frames)) {
+ /* set EOSP for the frame */
+ u8 *p = ieee80211_get_qos_ctl(hdr);
+ *p |= IEEE80211_QOS_CTL_EOSP;
+ info->flags |= IEEE80211_TX_STATUS_EOSP |
+ IEEE80211_TX_CTL_REQ_TX_STATUS;
+ }
- ieee80211_add_pending_skb(local, skb);
+ __skb_queue_tail(&pending, skb);
+ }
+
+ ieee80211_add_pending_skbs(local, &pending);
sta_info_recalc_tim(sta);
} else {
* needs to be set anyway.
*/
drv_release_buffered_frames(local, sta, driver_release_tids,
- 1, IEEE80211_FRAME_RELEASE_PSPOLL,
- more_data);
+ n_frames, reason, more_data);
/*
* Note that we don't recalculate the TIM bit here as it would
}
}
+void ieee80211_sta_ps_deliver_poll_response(struct sta_info *sta)
+{
+ u8 ignore_for_response = sta->sta.uapsd_queues;
+
+ /*
+ * If all ACs are delivery-enabled then we should reply
+ * from any of them, if only some are enabled we reply
+ * only from the non-enabled ones.
+ */
+ if (ignore_for_response == BIT(IEEE80211_NUM_ACS) - 1)
+ ignore_for_response = 0;
+
+ ieee80211_sta_ps_deliver_response(sta, 1, ignore_for_response,
+ IEEE80211_FRAME_RELEASE_PSPOLL);
+}
+
+void ieee80211_sta_ps_deliver_uapsd(struct sta_info *sta)
+{
+ int n_frames = sta->sta.max_sp;
+ u8 delivery_enabled = sta->sta.uapsd_queues;
+
+ /*
+ * If we ever grow support for TSPEC this might happen if
+ * the TSPEC update from hostapd comes in between a trigger
+ * frame setting WLAN_STA_UAPSD in the RX path and this
+ * actually getting called.
+ */
+ if (!delivery_enabled)
+ return;
+
+ /* Ohh, finally, the service period starts :-) */
+ set_sta_flags(sta, WLAN_STA_SP);
+
+ switch (sta->sta.max_sp) {
+ case 1:
+ n_frames = 2;
+ break;
+ case 2:
+ n_frames = 4;
+ break;
+ case 3:
+ n_frames = 6;
+ break;
+ case 0:
+ /* XXX: what is a good value? */
+ n_frames = 8;
+ break;
+ }
+
+ ieee80211_sta_ps_deliver_response(sta, n_frames, ~delivery_enabled,
+ IEEE80211_FRAME_RELEASE_UAPSD);
+}
+
void ieee80211_sta_block_awake(struct ieee80211_hw *hw,
struct ieee80211_sta *pubsta, bool block)
{
* @WLAN_STA_TDLS_PEER: Station is a TDLS peer.
* @WLAN_STA_TDLS_PEER_AUTH: This TDLS peer is authorized to send direct
* packets. This means the link is enabled.
+ * @WLAN_STA_UAPSD: Station requested unscheduled SP while driver was
+ * keeping station in power-save mode, reply when the driver
+ * unblocks the station.
+ * @WLAN_STA_SP: Station is in a service period, so don't try to
+ * reply to other uAPSD trigger frames.
*/
enum ieee80211_sta_info_flags {
WLAN_STA_AUTH = 1<<0,
WLAN_STA_PSPOLL = 1<<13,
WLAN_STA_TDLS_PEER = 1<<15,
WLAN_STA_TDLS_PEER_AUTH = 1<<16,
+ WLAN_STA_UAPSD = 1<<17,
+ WLAN_STA_SP = 1<<18,
};
#define STA_TID_NUM 16
void ieee80211_sta_ps_deliver_wakeup(struct sta_info *sta);
void ieee80211_sta_ps_deliver_poll_response(struct sta_info *sta);
+void ieee80211_sta_ps_deliver_uapsd(struct sta_info *sta);
#endif /* STA_INFO_H */
hdr->frame_control &= ~cpu_to_le16(IEEE80211_FCTL_MOREDATA);
if (ieee80211_is_data_qos(hdr->frame_control)) {
- int tid = *ieee80211_get_qos_ctl(hdr) &
- IEEE80211_QOS_CTL_TID_MASK;
+ u8 *p = ieee80211_get_qos_ctl(hdr);
+ int tid = *p & IEEE80211_QOS_CTL_TID_MASK;
+
+ /*
+ * Clear EOSP if set, this could happen e.g.
+ * if an absence period (us being a P2P GO)
+ * shortens the SP.
+ */
+ if (*p & IEEE80211_QOS_CTL_EOSP)
+ *p &= ~IEEE80211_QOS_CTL_EOSP;
ac = ieee802_1d_to_ac[tid & 7];
} else {
ac = IEEE80211_AC_BE;
if (memcmp(hdr->addr2, sta->sdata->vif.addr, ETH_ALEN))
continue;
+ if (info->flags & IEEE80211_TX_STATUS_EOSP)
+ clear_sta_flags(sta, WLAN_STA_SP);
+
acked = !!(info->flags & IEEE80211_TX_STAT_ACK);
if (!acked && test_sta_flags(sta, WLAN_STA_PS_STA)) {
/*
staflags = get_sta_flags(sta);
if (unlikely((staflags & (WLAN_STA_PS_STA | WLAN_STA_PS_DRIVER)) &&
- !(info->flags & IEEE80211_TX_CTL_PSPOLL_RESPONSE))) {
+ !(info->flags & IEEE80211_TX_CTL_POLL_RESPONSE))) {
int ac = skb_get_queue_mapping(tx->skb);
#ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG
}
#ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG
else if (unlikely(staflags & WLAN_STA_PS_STA)) {
- printk(KERN_DEBUG "%s: STA %pM in PS mode, but pspoll "
- "set -> send frame\n", tx->sdata->name,
- sta->sta.addr);
+ printk(KERN_DEBUG
+ "%s: STA %pM in PS mode, but polling/in SP -> send frame\n",
+ tx->sdata->name, sta->sta.addr);
}
#endif /* CONFIG_MAC80211_VERBOSE_PS_DEBUG */
projects / platform / kernel / linux-rpi.git / commitdiff