samsung: tizen_rpi: Remove tizen_rpi header file

Remove a tizen_rpi header file as dead code.
It's repalced to tizen_rpi.env file. It's not using anymore.

Change-Id: Ide1e6637173d5cfa2c592f599739458968a1d658
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>

diff --git a/include/samsung/tizen_rpi.h b/include/samsung/tizen_rpi.h
deleted file mode 100644 (file)
index a1b3224..0000000
--- a/include/samsung/tizen_rpi.h
+++ /dev/null
@@ -1,132 +0,0 @@
-/*
- * Copyright (C) 2019 Samsung Electronics
- *
- * Configuration settings for the Tizen RPI board.
- *
- * SPDX-License-Identifier:    GPL-2.0+
- */
-
-#ifndef __CONFIG_TIZEN_RPI_H
-#define __CONFIG_TIZEN_RPI_H
-
-/* DFU */
-#define DFU_ALT_SYSTEM                         \
-       "Image fat 0 1;"                        \
-       "bcm2710-rpi-3-b.dtb fat 0 1;"          \
-       "bcm2837-rpi-3-b.dtb fat 0 1;"          \
-       "bcm2710-rpi-3-b-plus.dtb fat 0 1;"     \
-       "bcm2711-rpi-4-b.dtb fat 0 1;"          \
-       "u-boot.bin fat 0 1;"                   \
-       "uboot.env fat 0 1;"                    \
-       "boot.scr.uimg fat 0 1;"                \
-       "zImage fat 0 1;"                       \
-       "boot.img part 0 1;"                    \
-       "rootfs part 0 2;"                      \
-       "system-data part 0 3;"                 \
-       "user part 0 5;"                        \
-       "module part 0 6;"                      \
-       "ramdisk.img part 0 7;"                 \
-       "ramdisk-recovery part 0 8;"            \
-       "hal.img part 0 10"
-
-#define CONFIG_SET_DFU_ALT_BUF_LEN     (SZ_1K)
-
-#define GPT_PARTS_DEFAULT \
-       "uuid_disk=${uuid_gpt_disk};"                           \
-       "name=boot_a,start=4MiB,uuid=${uuid_gpt_boot_a},size=64MiB,type=C12A7328-F81F-11D2-BA4B-00A0C93EC93B;"  \
-       "name=rootfs_a,size=3072MiB,uuid=${uuid_gpt_rootfs_a},type=linux;"      \
-       "name=system-data,size=1344MiB,uuid=${uuid_gpt_data},type=linux;"       \
-       "name=none,size=36MiB,uuid=${uuid_gpt_none},type=linux;"        \
-       "name=user,size=6636MiB,uuid=${uuid_gpt_user},type=linux;"      \
-       "name=module_a,size=32MiB,uuid=${uuid_gpt_module_a},type=linux;"        \
-       "name=ramdisk_a,size=32MiB,uuid=${uuid_gpt_ramdisk_a},type=linux;"      \
-       "name=ramdisk-recovery_a,size=32MiB,uuid=${uuid_gpt_ramdisk-recovery_a},type=linux;"    \
-       "name=inform,size=8MiB,uuid=${uuid_gpt_inform},type=linux;"     \
-       "name=hal_a,size=256MiB,uuid=${uuid_gpt_hal_a},type=linux;"     \
-       "name=boot_b,size=64MiB,uuid=${uuid_gpt_boot_b},type=C12A7328-F81F-11D2-BA4B-00A0C93EC93B;"     \
-       "name=rootfs_b,size=3072MiB,uuid=${uuid_gpt_rootf_b},type=linux;"       \
-       "name=module_b,size=32MiB,uuid=${uuid_gpt_module_b},type=linux;"        \
-       "name=ramdisk_b,size=32MiB,uuid=${uuid_gpt_ramdisk_b},type=linux;"      \
-       "name=ramdisk-recovery_b,size=32MiB,uuid=${uuid_gpt_ramdisk-recovery_b},type=linux;"    \
-       "name=hal_b,size=256MiB,uuid=${uuid_gpt_hal_b},type=linux;"     \
-       "name=reserved0,size=4MiB,uuid=${uuid_gpt_reserved0},type=linux;"       \
-       "name=reserved1,size=64MiB,uuid=${uuid_gpt_reserved1},type=linux;"      \
-       "name=reserved2,size=-,uuid=${uuid_gpt_reserved2},type=linux;"  \
-       ""
-
-#ifdef CONFIG_TARGET_RPI_4_32B
-#define TIZEN_VC_MEM "vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 swiotlb=8192 "
-#else
-#define TIZEN_VC_MEM "vc_mem.mem_base=0x3dc00000 vc_mem.mem_size=0x3f000000 "
-#endif
-
-#define SET_INFORM_PART        \
-       "part number ${devtype} ${devnum} ${informname} informpart; "
-
-#define SET_TO_PARTITION_X(val)        \
-       SET_INFORM_PART \
-       "if test -e ${devtype} ${devnum}:${informpart} ${slotfile}; then; " \
-               "load ${devtype} ${devnum}:${informpart} ${slot_addr} /${slotfile} 2; " \
-       "fi; " \
-       "mw.b ${slot_addr} " val "; " \
-       "ext4write ${devtype} ${devnum}:${informpart} ${slot_addr} /${slotfile} 2;" \
-
-#define CLEAR_REBOOT_PARAM \
-       SET_INFORM_PART \
-       "mw.l ${rebootparam_addr} ${normal_val} ; " \
-       "ext4write ${devtype} ${devnum}:${informpart} ${rebootparam_addr} /${rebootparamfile} 8; "
-
-
-/* SD/MMC configuration */
-#define CONFIG_MMC_DEFAULT_DEV 0
-
-#ifdef CONFIG_ARM64
-#define KERNEL_NAME    "Image"
-#else
-#define KERNEL_NAME    "zImage"
-#endif
-
-/*
-# use the ram address of ramdisk before loading ramdisk image
-# 0x72677075 is ascii code for representing string "upgr"
-# 0x72766372 is ascii code for representing string "rcvr"
-# 0x6665646e is ascii code for representing string "ndef"
-# 0x6c6e7764 is ascii code for representing string "dwnl"
-# 0x696c6e6f is ascii code for representing string "onli"
-*/
-#define TIZEN_ENV_SETTING \
-       "kernel=" KERNEL_NAME "\0"              \
-       "dfu_alt_info=" DFU_ALT_SYSTEM "\0"     \
-       "informpart=9\0"                        \
-       "rebootparamfile=reboot-param.bin\0"    \
-       "upgradetypefile=upgrade-type.info\0"   \
-       "slotfile=partition-ab.info\0"  \
-       "slot_addr=0x02200000\0"                \
-       "rebootparam_addr=0x02100000\0"         \
-       "upgradetype_addr=0x02300000\0"         \
-       "upgradetype_online_val=696c6e6f\0"     \
-       "upgrade_val=72677075\0"                \
-       "recovery_val=72766372\0"               \
-       "nodef_val=6665646e\0"                  \
-       "normal_val=6d726f6e\0"                 \
-       "download_val=6c6e7764\0"               \
-       "tfm=setenv bootmode download; run set_to_part_a; run bootcmd\0"        \
-       "tizen_bootarg=cgroup_enable=memory "           \
-               TIZEN_VC_MEM                            \
-               "8250.nr_uarts=1 dma.dmachans=0x7f35 bcm2709.serial=0xed6687d3 "        \
-               "snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 "           \
-               "bcm2709.uart_clock=48000000 dwc_otg.lpm_enable=0\0"    \
-       "opts=loglevel=4\0"                     \
-       "dfu_usb_con=0\0"                       \
-       "dfu_interface=mmc\0"                   \
-       "dfu_device=" __stringify(CONFIG_MMC_DEFAULT_DEV) "\0" \
-       "set_to_part_a=" SET_TO_PARTITION_X("0x61") "\0"                \
-       "set_to_part_b=" SET_TO_PARTITION_X("0x62") "\0"                \
-       "disable_delay=setenv console console=ram; setenv bootdelay 0; saveenv\0"               \
-       "enable_delay=env delete console; setenv bootdelay 2; saveenv\0"                        \
-       "gpt_parts=" GPT_PARTS_DEFAULT "\0"             \
-       "update_gpt_part=gpt write ${devtype} ${devnum} ${gpt_parts}\0"         \
-       "reboot_param_clear=" CLEAR_REBOOT_PARAM "\0"                           \
-       ""
-
-#endif /* __CONFIG_TIZEN_RPI_H */