arm64: dts: meson: fix PHY deassert timing requirements

[ Upstream commit c183c406c4321002fe85b345b51bc1a3a04b6d33 ]

According to the datasheet (Rev. 1.9) the RTL8211F requires at least
72ms "for internal circuits settling time" before accessing the PHY
registers. This fixes an issue seen on ODROID-C2 where the Ethernet
link doesn't come up when using ip link set down/up:
  [ 6630.714855] meson8b-dwmac c9410000.ethernet eth0: Link is Down
  [ 6630.785775] meson8b-dwmac c9410000.ethernet eth0: PHY [stmmac-0:00] driver [RTL8211F Gigabit Ethernet] (irq=36)
  [ 6630.893071] meson8b-dwmac c9410000.ethernet: Failed to reset the dma
  [ 6630.893800] meson8b-dwmac c9410000.ethernet eth0: stmmac_hw_setup: DMA engine initialization failed
  [ 6630.902835] meson8b-dwmac c9410000.ethernet eth0: stmmac_open: Hw setup failed

Fixes: f29cabf240ed ("arm64: dts: meson: use the generic Ethernet PHY reset GPIO bindings")
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/4a322c198b86e4c8b3dda015560a683babea4d63.1607363522.git.stefan@agner.ch
Signed-off-by: Sasha Levin <sashal@kernel.org>

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts
index 7be3e354093bfad3f8ac298889379ce32d072810..de27beafe9db946d9a2afe65f1b23d5e54a155f0 100644 (file)
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts
@@ -165,7 +165,7 @@
                        reg = <0>;
 
                        reset-assert-us = <10000>;
-                       reset-deassert-us = <30000>;
+                       reset-deassert-us = <80000>;
                        reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
 
                        interrupt-parent = <&gpio_intc>;

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
index 70fcfb7b0683d43a9397301eb4403a155066b826..50de1d01e5655e4d68e0342cbce4f850ed80d9c7 100644 (file)
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
@@ -200,7 +200,7 @@
                        reg = <0>;
 
                        reset-assert-us = <10000>;
-                       reset-deassert-us = <30000>;
+                       reset-deassert-us = <80000>;
                        reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
 
                        interrupt-parent = <&gpio_intc>;

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
index 222ee8069cfaa4c024b55effa25b940a7284f006..9b0b81f191f1fcfe001d37ff65ad4e0dd60add60 100644 (file)
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
@@ -126,7 +126,7 @@
                        reg = <0>;
 
                        reset-assert-us = <10000>;
-                       reset-deassert-us = <30000>;
+                       reset-deassert-us = <80000>;
                        reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
 
                        interrupt-parent = <&gpio_intc>;

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
index ad812854a107f40fe709091352b8662939b1d5e5..a350fee1264d7b1dfe2cf83d3a8a41bd16efebc3 100644 (file)
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
@@ -147,7 +147,7 @@
                        reg = <0>;
 
                        reset-assert-us = <10000>;
-                       reset-deassert-us = <30000>;
+                       reset-deassert-us = <80000>;
                        reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
 
                        interrupt-parent = <&gpio_intc>;

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts
index b08c4537f260dbfc556f6252ed0f00e66713da55..b2ab05c2209031e3debce642869e325998b46818 100644 (file)
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts
@@ -82,7 +82,7 @@
 
                /* External PHY reset is shared with internal PHY Led signal */
                reset-assert-us = <10000>;
-               reset-deassert-us = <30000>;
+               reset-deassert-us = <80000>;
                reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
 
                interrupt-parent = <&gpio_intc>;

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
index e2bd9c7c817d72125dafdbe9dbd139ecd02c80e1..62d3e04299b67e6062f5f4ff56a0d8e830139f9e 100644 (file)
--- a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
@@ -194,7 +194,7 @@
                reg = <0>;
 
                reset-assert-us = <10000>;
-               reset-deassert-us = <30000>;
+               reset-deassert-us = <80000>;
                reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
 
                interrupt-parent = <&gpio_intc>;

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
index 83eca3af44ce7be077408b409c684c49bdb69098..dfa7a37a1281f8d9bf5ee79e0dbc4a88d110433a 100644 (file)
--- a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
@@ -112,7 +112,7 @@
                max-speed = <1000>;
 
                reset-assert-us = <10000>;
-               reset-deassert-us = <30000>;
+               reset-deassert-us = <80000>;
                reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
        };
 };

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts
index ea45ae0c71b7f16d00596453d13c628af25bd368..8edbfe040805c5169577d86e1b3d0adcc96ea10e 100644 (file)
--- a/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts
@@ -64,7 +64,7 @@
 
                /* External PHY reset is shared with internal PHY Led signal */
                reset-assert-us = <10000>;
-               reset-deassert-us = <30000>;
+               reset-deassert-us = <80000>;
                reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
 
                interrupt-parent = <&gpio_intc>;

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts
index c89c9f846fb10fdf1d7507aab6e5ca0599c189aa..dde7cfe12cffa1179b17a8d7320f3cdc8a8cb668 100644 (file)
--- a/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts
@@ -114,7 +114,7 @@
                max-speed = <1000>;
 
                reset-assert-us = <10000>;
-               reset-deassert-us = <30000>;
+               reset-deassert-us = <80000>;
                reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
        };
 };