ARM: OMAP: boards: Fix OMAP_GPIO_IRQ usage with gpio_to_irq()
authorTarun Kanti DebBarma <tarun.kanti@ti.com>
Thu, 29 Mar 2012 15:41:01 +0000 (08:41 -0700)
committerTony Lindgren <tony@atomide.com>
Thu, 29 Mar 2012 15:41:01 +0000 (08:41 -0700)
The following commits change gpio-omap to use dynamic
IRQ allocation:

25db711 gpio/omap: Fix IRQ handling for SPARSE_IRQ
384ebe1 gpio/omap: Add DT support to GPIO driver

With dynamic allocation of IRQ the usage of OMAP_GPIO_IRQ
is no longer valid. We must be using gpio_to_irq() instead.

Signed-off-by: Tarun Kanti DebBarma <tarun.kanti@ti.com>
[tony@atomide.com: updated comments]
Signed-off-by: Tony Lindgren <tony@atomide.com>
21 files changed:
arch/arm/mach-omap1/board-h2.c
arch/arm/mach-omap1/board-h3.c
arch/arm/mach-omap1/board-htcherald.c
arch/arm/mach-omap1/board-innovator.c
arch/arm/mach-omap1/board-nokia770.c
arch/arm/mach-omap1/board-osk.c
arch/arm/mach-omap1/board-palmte.c
arch/arm/mach-omap1/board-palmtt.c
arch/arm/mach-omap1/board-palmz71.c
arch/arm/mach-omap1/board-voiceblue.c
arch/arm/mach-omap2/board-2430sdp.c
arch/arm/mach-omap2/board-4430sdp.c
arch/arm/mach-omap2/board-apollon.c
arch/arm/mach-omap2/board-devkit8000.c
arch/arm/mach-omap2/board-h4.c
arch/arm/mach-omap2/board-omap3evm.c
arch/arm/mach-omap2/board-omap4panda.c
arch/arm/mach-omap2/board-rx51-peripherals.c
arch/arm/mach-omap2/board-zoom-debugboard.c
arch/arm/mach-omap2/board-zoom-peripherals.c
arch/arm/mach-omap2/common-board-devices.c

index 03e0050..3768088 100644 (file)
@@ -244,8 +244,6 @@ static struct resource h2_smc91x_resources[] = {
                .flags  = IORESOURCE_MEM,
        },
        [1] = {
-               .start  = OMAP_GPIO_IRQ(0),
-               .end    = OMAP_GPIO_IRQ(0),
                .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
        },
 };
@@ -364,11 +362,9 @@ static struct tps65010_board tps_board = {
 static struct i2c_board_info __initdata h2_i2c_board_info[] = {
        {
                I2C_BOARD_INFO("tps65010", 0x48),
-               .irq            = OMAP_GPIO_IRQ(58),
                .platform_data  = &tps_board,
        }, {
                I2C_BOARD_INFO("isp1301_omap", 0x2d),
-               .irq            = OMAP_GPIO_IRQ(2),
        },
 };
 
@@ -437,10 +433,14 @@ static void __init h2_init(void)
        omap_cfg_reg(E19_1610_KBR4);
        omap_cfg_reg(N19_1610_KBR5);
 
+       h2_smc91x_resources[1].start = gpio_to_irq(0);
+       h2_smc91x_resources[1].end = gpio_to_irq(0);
        platform_add_devices(h2_devices, ARRAY_SIZE(h2_devices));
        omap_board_config = h2_config;
        omap_board_config_size = ARRAY_SIZE(h2_config);
        omap_serial_init();
+       h2_i2c_board_info[0].irq = gpio_to_irq(58);
+       h2_i2c_board_info[1].irq = gpio_to_irq(2);
        omap_register_i2c_bus(1, 100, h2_i2c_board_info,
                              ARRAY_SIZE(h2_i2c_board_info));
        omap1_usb_init(&h2_usb_config);
index f304fe2..09e8582 100644 (file)
@@ -246,8 +246,6 @@ static struct resource smc91x_resources[] = {
                .flags  = IORESOURCE_MEM,
        },
        [1] = {
-               .start  = OMAP_GPIO_IRQ(40),
-               .end    = OMAP_GPIO_IRQ(40),
                .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
        },
 };
@@ -337,7 +335,6 @@ static struct spi_board_info h3_spi_board_info[] __initdata = {
                .modalias       = "tsc2101",
                .bus_num        = 2,
                .chip_select    = 0,
-               .irq            = OMAP_GPIO_IRQ(H3_TS_GPIO),
                .max_speed_hz   = 16000000,
                /* .platform_data       = &tsc_platform_data, */
        },
@@ -377,11 +374,9 @@ static struct omap_board_config_kernel h3_config[] __initdata = {
 static struct i2c_board_info __initdata h3_i2c_board_info[] = {
        {
                I2C_BOARD_INFO("tps65013", 0x48),
-               /* .irq         = OMAP_GPIO_IRQ(??), */
        },
        {
                I2C_BOARD_INFO("isp1301_omap", 0x2d),
-               .irq            = OMAP_GPIO_IRQ(14),
        },
 };
 
@@ -423,12 +418,16 @@ static void __init h3_init(void)
        omap_cfg_reg(E19_1610_KBR4);
        omap_cfg_reg(N19_1610_KBR5);
 
+       smc91x_resources[1].start = gpio_to_irq(40);
+       smc91x_resources[1].end = gpio_to_irq(40);
        platform_add_devices(devices, ARRAY_SIZE(devices));
+       h3_spi_board_info[0].irq = gpio_to_irq(H3_TS_GPIO);
        spi_register_board_info(h3_spi_board_info,
                                ARRAY_SIZE(h3_spi_board_info));
        omap_board_config = h3_config;
        omap_board_config_size = ARRAY_SIZE(h3_config);
        omap_serial_init();
+       h3_i2c_board_info[1].irq = gpio_to_irq(14);
        omap_register_i2c_bus(1, 100, h3_i2c_board_info,
                              ARRAY_SIZE(h3_i2c_board_info));
        omap1_usb_init(&h3_usb_config);
index fa52d14..797bbd6 100644 (file)
@@ -323,8 +323,6 @@ static struct platform_device gpio_leds_device = {
 
 static struct resource htcpld_resources[] = {
        [0] = {
-               .start  = OMAP_GPIO_IRQ(HTCHERALD_GIRQ_BTNS),
-               .end    = OMAP_GPIO_IRQ(HTCHERALD_GIRQ_BTNS),
                .flags  = IORESOURCE_IRQ,
        },
 };
@@ -453,7 +451,6 @@ static struct spi_board_info __initdata htcherald_spi_board_info[] = {
        {
                .modalias               = "ads7846",
                .platform_data          = &htcherald_ts_platform_data,
-               .irq                    = OMAP_GPIO_IRQ(HTCHERALD_GPIO_TS),
                .max_speed_hz           = 2500000,
                .bus_num                = 2,
                .chip_select            = 1,
@@ -581,6 +578,8 @@ static void __init htcherald_init(void)
        /* Do board initialization before we register all the devices */
        omap_board_config = htcherald_config;
        omap_board_config_size = ARRAY_SIZE(htcherald_config);
+       htcpld_resources[0].start = gpio_to_irq(HTCHERALD_GIRQ_BTNS);
+       htcpld_resources[0].end = gpio_to_irq(HTCHERALD_GIRQ_BTNS);
        platform_add_devices(devices, ARRAY_SIZE(devices));
 
        htcherald_disable_watchdog();
@@ -588,6 +587,7 @@ static void __init htcherald_init(void)
        htcherald_usb_enable();
        omap1_usb_init(&htcherald_usb_config);
 
+       htcherald_spi_board_info[0].irq = gpio_to_irq(HTCHERALD_GPIO_TS);
        spi_register_board_info(htcherald_spi_board_info,
                ARRAY_SIZE(htcherald_spi_board_info));
 
index 289a6b8..315c021 100644 (file)
@@ -247,8 +247,6 @@ static struct resource innovator1610_smc91x_resources[] = {
                .flags  = IORESOURCE_MEM,
        },
        [1] = {
-               .start  = OMAP_GPIO_IRQ(0),
-               .end    = OMAP_GPIO_IRQ(0),
                .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
        },
 };
@@ -412,6 +410,8 @@ static void __init innovator_init(void)
 #endif
 #ifdef CONFIG_ARCH_OMAP16XX
        if (!cpu_is_omap1510()) {
+               innovator1610_smc91x_resources[1].start = gpio_to_irq(0);
+               innovator1610_smc91x_resources[1].end = gpio_to_irq(0);
                platform_add_devices(innovator1610_devices, ARRAY_SIZE(innovator1610_devices));
        }
 #endif
index abdbdb0..1d87332 100644 (file)
@@ -147,7 +147,6 @@ static struct spi_board_info nokia770_spi_board_info[] __initdata = {
                .bus_num        = 2,
                .chip_select    = 0,
                .max_speed_hz   = 2500000,
-               .irq            = OMAP_GPIO_IRQ(15),
                .platform_data  = &nokia770_ads7846_platform_data,
        },
 };
@@ -242,6 +241,7 @@ static void __init omap_nokia770_init(void)
        omap_writew((omap_readw(0xfffb5004) & ~2), 0xfffb5004);
 
        platform_add_devices(nokia770_devices, ARRAY_SIZE(nokia770_devices));
+       nokia770_spi_board_info[1].irq = gpio_to_irq(15);
        spi_register_board_info(nokia770_spi_board_info,
                                ARRAY_SIZE(nokia770_spi_board_info));
        omap_serial_init();
index e2d7ae4..a0c1a1c 100644 (file)
@@ -128,8 +128,6 @@ static struct resource osk5912_smc91x_resources[] = {
                .flags  = IORESOURCE_MEM,
        },
        [1] = {
-               .start  = OMAP_GPIO_IRQ(0),
-               .end    = OMAP_GPIO_IRQ(0),
                .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
        },
 };
@@ -146,8 +144,6 @@ static struct platform_device osk5912_smc91x_device = {
 
 static struct resource osk5912_cf_resources[] = {
        [0] = {
-               .start  = OMAP_GPIO_IRQ(62),
-               .end    = OMAP_GPIO_IRQ(62),
                .flags  = IORESOURCE_IRQ,
        },
 };
@@ -239,7 +235,6 @@ static struct tps65010_board tps_board = {
 static struct i2c_board_info __initdata osk_i2c_board_info[] = {
        {
                I2C_BOARD_INFO("tps65010", 0x48),
-               .irq            = OMAP_GPIO_IRQ(OMAP_MPUIO(1)),
                .platform_data  = &tps_board,
 
        },
@@ -413,7 +408,6 @@ static struct spi_board_info __initdata mistral_boardinfo[] = { {
        /* MicroWire (bus 2) CS0 has an ads7846e */
        .modalias               = "ads7846",
        .platform_data          = &mistral_ts_info,
-       .irq                    = OMAP_GPIO_IRQ(4),
        .max_speed_hz           = 120000 /* max sample rate at 3V */
                                        * 26 /* command + data + overhead */,
        .bus_num                = 2,
@@ -476,6 +470,7 @@ static void __init osk_mistral_init(void)
        gpio_direction_input(4);
        irq_set_irq_type(gpio_to_irq(4), IRQ_TYPE_EDGE_FALLING);
 
+       mistral_boardinfo[0].irq = gpio_to_irq(4);
        spi_register_board_info(mistral_boardinfo,
                        ARRAY_SIZE(mistral_boardinfo));
 
@@ -547,6 +542,10 @@ static void __init osk_init(void)
 
        osk_flash_resource.end = osk_flash_resource.start = omap_cs3_phys();
        osk_flash_resource.end += SZ_32M - 1;
+       osk5912_smc91x_resources[1].start = gpio_to_irq(0);
+       osk5912_smc91x_resources[1].end = gpio_to_irq(0);
+       osk5912_cf_resources[0].start = gpio_to_irq(62);
+       osk5912_cf_resources[0].end = gpio_to_irq(62);
        platform_add_devices(osk5912_devices, ARRAY_SIZE(osk5912_devices));
        omap_board_config = osk_config;
        omap_board_config_size = ARRAY_SIZE(osk_config);
@@ -563,6 +562,7 @@ static void __init osk_init(void)
                gpio_direction_input(OMAP_MPUIO(1));
 
        omap_serial_init();
+       osk_i2c_board_info[0].irq = gpio_to_irq(OMAP_MPUIO(1));
        omap_register_i2c_bus(1, 400, osk_i2c_board_info,
                              ARRAY_SIZE(osk_i2c_board_info));
        osk_mistral_init();
index 04efa7e..66e2a74 100644 (file)
@@ -220,7 +220,6 @@ static struct spi_board_info palmte_spi_info[] __initdata = {
                .modalias       = "tsc2102",
                .bus_num        = 2,    /* uWire (officially) */
                .chip_select    = 0,    /* As opposed to 3 */
-               .irq            = OMAP_GPIO_IRQ(PALMTE_PINTDAV_GPIO),
                .max_speed_hz   = 8000000,
        },
 };
@@ -257,6 +256,7 @@ static void __init omap_palmte_init(void)
 
        platform_add_devices(palmte_devices, ARRAY_SIZE(palmte_devices));
 
+       palmte_spi_info[0].irq = gpio_to_irq(PALMTE_PINTDAV_GPIO);
        spi_register_board_info(palmte_spi_info, ARRAY_SIZE(palmte_spi_info));
        palmte_misc_gpio_setup();
        omap_serial_init();
index acd1f36..fa9ce9c 100644 (file)
@@ -256,7 +256,6 @@ static struct spi_board_info __initdata palmtt_boardinfo[] = {
                /* MicroWire (bus 2) CS0 has an ads7846e */
                .modalias       = "ads7846",
                .platform_data  = &palmtt_ts_info,
-               .irq            = OMAP_GPIO_IRQ(6),
                .max_speed_hz   = 120000        /* max sample rate at 3V */
                                        * 26    /* command + data + overhead */,
                .bus_num        = 2,
@@ -304,6 +303,7 @@ static void __init omap_palmtt_init(void)
 
        platform_add_devices(palmtt_devices, ARRAY_SIZE(palmtt_devices));
 
+       palmtt_boardinfo[0].irq = gpio_to_irq(6);
        spi_register_board_info(palmtt_boardinfo,ARRAY_SIZE(palmtt_boardinfo));
        omap_serial_init();
        omap1_usb_init(&palmtt_usb_config);
index c1cd0f2..b21df2f 100644 (file)
@@ -223,7 +223,6 @@ static struct spi_board_info __initdata palmz71_boardinfo[] = { {
        /* MicroWire (bus 2) CS0 has an ads7846e */
        .modalias       = "ads7846",
        .platform_data  = &palmz71_ts_info,
-       .irq            = OMAP_GPIO_IRQ(PALMZ71_PENIRQ_GPIO),
        .max_speed_hz   = 120000        /* max sample rate at 3V */
                                * 26    /* command + data + overhead */,
        .bus_num        = 2,
@@ -319,6 +318,7 @@ omap_palmz71_init(void)
 
        platform_add_devices(devices, ARRAY_SIZE(devices));
 
+       palmz71_boardinfo[0].irq = gpio_to_irq(PALMZ71_PENIRQ_GPIO);
        spi_register_board_info(palmz71_boardinfo,
                                ARRAY_SIZE(palmz71_boardinfo));
        omap1_usb_init(&palmz71_usb_config);
index 659d0f7..37232d0 100644 (file)
@@ -44,7 +44,6 @@
 static struct plat_serial8250_port voiceblue_ports[] = {
        {
                .mapbase        = (unsigned long)(OMAP_CS1_PHYS + 0x40000),
-               .irq            = OMAP_GPIO_IRQ(12),
                .flags          = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
                .iotype         = UPIO_MEM,
                .regshift       = 1,
@@ -52,7 +51,6 @@ static struct plat_serial8250_port voiceblue_ports[] = {
        },
        {
                .mapbase        = (unsigned long)(OMAP_CS1_PHYS + 0x50000),
-               .irq            = OMAP_GPIO_IRQ(13),
                .flags          = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
                .iotype         = UPIO_MEM,
                .regshift       = 1,
@@ -60,7 +58,6 @@ static struct plat_serial8250_port voiceblue_ports[] = {
        },
        {
                .mapbase        = (unsigned long)(OMAP_CS1_PHYS + 0x60000),
-               .irq            = OMAP_GPIO_IRQ(14),
                .flags          = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
                .iotype         = UPIO_MEM,
                .regshift       = 1,
@@ -68,7 +65,6 @@ static struct plat_serial8250_port voiceblue_ports[] = {
        },
        {
                .mapbase        = (unsigned long)(OMAP_CS1_PHYS + 0x70000),
-               .irq            = OMAP_GPIO_IRQ(15),
                .flags          = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
                .iotype         = UPIO_MEM,
                .regshift       = 1,
@@ -80,9 +76,6 @@ static struct plat_serial8250_port voiceblue_ports[] = {
 static struct platform_device serial_device = {
        .name                   = "serial8250",
        .id                     = PLAT8250_DEV_PLATFORM1,
-       .dev                    = {
-               .platform_data  = voiceblue_ports,
-       },
 };
 
 static int __init ext_uart_init(void)
@@ -90,6 +83,11 @@ static int __init ext_uart_init(void)
        if (!machine_is_voiceblue())
                return -ENODEV;
 
+       voiceblue_ports[0].irq = gpio_to_irq(12);
+       voiceblue_ports[1].irq = gpio_to_irq(13);
+       voiceblue_ports[2].irq = gpio_to_irq(14);
+       voiceblue_ports[3].irq = gpio_to_irq(15);
+       serial_device.dev.platform_data = voiceblue_ports;
        return platform_device_register(&serial_device);
 }
 arch_initcall(ext_uart_init);
@@ -128,8 +126,6 @@ static struct resource voiceblue_smc91x_resources[] = {
                .flags  = IORESOURCE_MEM,
        },
        [1] = {
-               .start  = OMAP_GPIO_IRQ(8),
-               .end    = OMAP_GPIO_IRQ(8),
                .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
        },
 };
@@ -275,6 +271,8 @@ static void __init voiceblue_init(void)
        irq_set_irq_type(gpio_to_irq(14), IRQ_TYPE_EDGE_RISING);
        irq_set_irq_type(gpio_to_irq(15), IRQ_TYPE_EDGE_RISING);
 
+       voiceblue_smc91x_resources[1].start = gpio_to_irq(8);
+       voiceblue_smc91x_resources[1].end = gpio_to_irq(8);
        platform_add_devices(voiceblue_devices, ARRAY_SIZE(voiceblue_devices));
        omap_board_config = voiceblue_config;
        omap_board_config_size = ARRAY_SIZE(voiceblue_config);
index 7370983..5a1b6af 100644 (file)
@@ -230,12 +230,12 @@ static struct i2c_board_info __initdata sdp2430_i2c1_boardinfo[] = {
        {
                I2C_BOARD_INFO("isp1301_omap", 0x2D),
                .flags = I2C_CLIENT_WAKE,
-               .irq = OMAP_GPIO_IRQ(78),
        },
 };
 
 static int __init omap2430_i2c_init(void)
 {
+       sdp2430_i2c1_boardinfo[0].irq = gpio_to_irq(78);
        omap_register_i2c_bus(1, 100, sdp2430_i2c1_boardinfo,
                        ARRAY_SIZE(sdp2430_i2c1_boardinfo));
        omap_pmic_init(2, 100, "twl4030", INT_24XX_SYS_NIRQ,
index 4e90715..a09c699 100644 (file)
@@ -873,7 +873,6 @@ static void __init omap4_sdp4430_wifi_mux_init(void)
 }
 
 static struct wl12xx_platform_data omap4_sdp4430_wlan_data __initdata = {
-       .irq = OMAP_GPIO_IRQ(GPIO_WIFI_IRQ),
        .board_ref_clock = WL12XX_REFCLOCK_26,
        .board_tcxo_clock = WL12XX_TCXOCLOCK_26,
 };
@@ -883,6 +882,7 @@ static void __init omap4_sdp4430_wifi_init(void)
        int ret;
 
        omap4_sdp4430_wifi_mux_init();
+       omap4_sdp4430_wlan_data.irq = gpio_to_irq(GPIO_WIFI_IRQ);
        ret = wl12xx_set_platform_data(&omap4_sdp4430_wlan_data);
        if (ret)
                pr_err("Error setting wl12xx data: %d\n", ret);
index ac77382..768ece2 100644 (file)
@@ -136,8 +136,6 @@ static struct resource apollon_smc91x_resources[] = {
                .flags  = IORESOURCE_MEM,
        },
        [1] = {
-               .start  = OMAP_GPIO_IRQ(APOLLON_ETHR_GPIO_IRQ),
-               .end    = OMAP_GPIO_IRQ(APOLLON_ETHR_GPIO_IRQ),
                .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
        },
 };
@@ -341,6 +339,8 @@ static void __init omap_apollon_init(void)
         * You have to mux them off in device drivers later on
         * if not needed.
         */
+       apollon_smc91x_resources[1].start = gpio_to_irq(APOLLON_ETHR_GPIO_IRQ);
+       apollon_smc91x_resources[1].end = gpio_to_irq(APOLLON_ETHR_GPIO_IRQ);
        platform_add_devices(apollon_devices, ARRAY_SIZE(apollon_devices));
        omap_serial_init();
        omap_sdrc_init(NULL, NULL);
index e873063..87cdb86 100644 (file)
@@ -410,7 +410,6 @@ static struct resource omap_dm9000_resources[] = {
                .flags          = IORESOURCE_MEM,
        },
        [2] = {
-               .start          = OMAP_GPIO_IRQ(OMAP_DM9000_GPIO_IRQ),
                .flags          = IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
        },
 };
@@ -637,6 +636,7 @@ static void __init devkit8000_init(void)
        omap_dm9000_init();
 
        devkit8000_i2c_init();
+       omap_dm9000_resources[2].start = gpio_to_irq(OMAP_DM9000_GPIO_IRQ);
        platform_add_devices(devkit8000_devices,
                        ARRAY_SIZE(devkit8000_devices));
 
index 54af800..0bbbabe 100644 (file)
@@ -348,7 +348,6 @@ static struct at24_platform_data m24c01 = {
 static struct i2c_board_info __initdata h4_i2c_board_info[] = {
        {
                I2C_BOARD_INFO("isp1301_omap", 0x2d),
-               .irq            = OMAP_GPIO_IRQ(125),
        },
        {       /* EEPROM on mainboard */
                I2C_BOARD_INFO("24c01", 0x52),
@@ -377,6 +376,7 @@ static void __init omap_h4_init(void)
         */
 
        board_mkp_init();
+       h4_i2c_board_info[0].irq = gpio_to_irq(125);
        i2c_register_board_info(1, h4_i2c_board_info,
                        ARRAY_SIZE(h4_i2c_board_info));
 
index c775bea..20a4743 100644 (file)
@@ -487,7 +487,6 @@ static struct platform_device omap3evm_wlan_regulator = {
 };
 
 struct wl12xx_platform_data omap3evm_wlan_data __initdata = {
-       .irq = OMAP_GPIO_IRQ(OMAP3EVM_WLAN_IRQ_GPIO),
        .board_ref_clock = WL12XX_REFCLOCK_38, /* 38.4 MHz */
 };
 #endif
@@ -623,6 +622,7 @@ static void __init omap3_evm_wl12xx_init(void)
        int ret;
 
        /* WL12xx WLAN Init */
+       omap3evm_wlan_data.irq = gpio_to_irq(OMAP3EVM_WLAN_IRQ_GPIO);
        ret = wl12xx_set_platform_data(&omap3evm_wlan_data);
        if (ret)
                pr_err("error setting wl12xx data: %d\n", ret);
index 28fc271..4496007 100644 (file)
@@ -199,7 +199,6 @@ static struct platform_device omap_vwlan_device = {
 };
 
 struct wl12xx_platform_data omap_panda_wlan_data  __initdata = {
-       .irq = OMAP_GPIO_IRQ(GPIO_WIFI_IRQ),
        /* PANDA ref clock is 38.4 MHz */
        .board_ref_clock = 2,
 };
@@ -494,6 +493,7 @@ static void __init omap4_panda_init(void)
                package = OMAP_PACKAGE_CBL;
        omap4_mux_init(board_mux, NULL, package);
 
+       omap_panda_wlan_data.irq = gpio_to_irq(GPIO_WIFI_IRQ);
        ret = wl12xx_set_platform_data(&omap_panda_wlan_data);
        if (ret)
                pr_err("error setting wl12xx data: %d\n", ret);
index 0a66891..2b6db67 100644 (file)
@@ -169,7 +169,6 @@ static struct spi_board_info rx51_peripherals_spi_board_info[] __initdata = {
                .modalias               = "tsc2005",
                .bus_num                = 1,
                .chip_select            = 0,
-               .irq                    = OMAP_GPIO_IRQ(RX51_TSC2005_IRQ_GPIO),
                .max_speed_hz           = 6000000,
                .controller_data        = &tsc2005_mcspi_config,
                .platform_data          = &tsc2005_pdata,
@@ -1121,6 +1120,8 @@ static void __init rx51_init_tsc2005(void)
                "tsc2005 reset");
        if (r >= 0) {
                tsc2005_pdata.set_reset = rx51_tsc2005_set_reset;
+               rx51_peripherals_spi_board_info[RX51_SPI_TSC2005].irq =
+                                       gpio_to_irq(RX51_TSC2005_IRQ_GPIO);
        } else {
                printk(KERN_ERR "unable to get %s GPIO\n", "tsc2005 reset");
                tsc2005_pdata.esd_timeout_ms = 0;
index 369c2eb..1e8540e 100644 (file)
@@ -43,7 +43,6 @@ static inline void __init zoom_init_smsc911x(void)
 static struct plat_serial8250_port serial_platform_data[] = {
        {
                .mapbase        = ZOOM_UART_BASE,
-               .irq            = OMAP_GPIO_IRQ(102),
                .flags          = UPF_BOOT_AUTOCONF|UPF_IOREMAP|UPF_SHARE_IRQ,
                .irqflags       = IRQF_SHARED | IRQF_TRIGGER_RISING,
                .iotype         = UPIO_MEM,
@@ -89,6 +88,8 @@ static inline void __init zoom_init_quaduart(void)
        if (gpio_request_one(quart_gpio, GPIOF_IN, "TL16CP754C GPIO") < 0)
                printk(KERN_ERR "Failed to request GPIO%d for TL16CP754C\n",
                                                                quart_gpio);
+
+       serial_platform_data[0].irq = gpio_to_irq(102);
 }
 
 static inline int omap_zoom_debugboard_detect(void)
index c126461..a489f82 100644 (file)
@@ -193,7 +193,6 @@ static struct platform_device omap_vwlan_device = {
 };
 
 static struct wl12xx_platform_data omap_zoom_wlan_data __initdata = {
-       .irq = OMAP_GPIO_IRQ(OMAP_ZOOM_WLAN_IRQ_GPIO),
        /* ZOOM ref clock is 26 MHz */
        .board_ref_clock = 1,
 };
@@ -296,7 +295,10 @@ static void enable_board_wakeup_source(void)
 
 void __init zoom_peripherals_init(void)
 {
-       int ret = wl12xx_set_platform_data(&omap_zoom_wlan_data);
+       int ret;
+
+       omap_zoom_wlan_data.irq = gpio_to_irq(OMAP_ZOOM_WLAN_IRQ_GPIO);
+       ret = wl12xx_set_platform_data(&omap_zoom_wlan_data);
 
        if (ret)
                pr_err("error setting wl12xx data: %d\n", ret);
index 2d1d775..9238ce0 100644 (file)
@@ -78,7 +78,7 @@ void __init omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce,
        ads7846_config.gpio_pendown = gpio_pendown;
 
        spi_bi->bus_num = bus_num;
-       spi_bi->irq     = OMAP_GPIO_IRQ(gpio_pendown);
+       spi_bi->irq     = gpio_to_irq(gpio_pendown);
 
        if (board_pdata)
                spi_bi->platform_data = board_pdata;