drivers: usb: core: {file,hub,sysfs,usb}.c: Whitespace fixes

including:

- removing of trailing whitespace
- removing spaces before array indexing (foo [] to foo[])
- reindention of a switch-case block
- spaces to tabs

Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/usb/core/file.c b/drivers/usb/core/file.c
index 7421888..903c7ef 100644 (file)
--- a/drivers/usb/core/file.c
+++ b/drivers/usb/core/file.c
@@ -8,7 +8,7 @@
  * (C) Copyright Deti Fliegl 1999 (new USB architecture)
  * (C) Copyright Randy Dunlap 2000
  * (C) Copyright David Brownell 2000-2001 (kernel hotplug, usb_device_id,
-       more docs, etc)
+ *     more docs, etc)
  * (C) Copyright Yggdrasil Computing, Inc. 2000
  *     (usb_device_id matching changes by Adam J. Richter)
  * (C) Copyright Greg Kroah-Hartman 2002-2003
@@ -44,7 +44,7 @@ static int usb_open(struct inode * inode, struct file * file)
        file->f_op = new_fops;
        /* Curiouser and curiouser... NULL ->open() as "no device" ? */
        if (file->f_op->open)
-               err = file->f_op->open(inode,file);
+               err = file->f_op->open(inode, file);
        if (err) {
                fops_put(file->f_op);
                file->f_op = fops_get(old_fops);
@@ -166,7 +166,7 @@ int usb_register_dev(struct usb_interface *intf,
        char *temp;
 
 #ifdef CONFIG_USB_DYNAMIC_MINORS
-       /* 
+       /*
         * We don't care what the device tries to start at, we want to start
         * at zero to pack the devices into the smallest available space with
         * no holes in the minor range.

diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 2e804a5..6e451ca 100644 (file)
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -120,7 +120,7 @@ static inline char *portspeed(struct usb_hub *hub, int portstatus)
        if (hub_is_superspeed(hub->hdev))
                return "5.0 Gb/s";
        if (portstatus & USB_PORT_STAT_HIGH_SPEED)
-               return "480 Mb/s";
+               return "480 Mb/s";
        else if (portstatus & USB_PORT_STAT_LOW_SPEED)
                return "1.5 Mb/s";
        else
@@ -862,7 +862,7 @@ static int hub_hub_status(struct usb_hub *hub,
                                "%s failed (err = %d)\n", __func__, ret);
        } else {
                *status = le16_to_cpu(hub->status->hub.wHubStatus);
-               *change = le16_to_cpu(hub->status->hub.wHubChange); 
+               *change = le16_to_cpu(hub->status->hub.wHubChange);
                ret = 0;
        }
        mutex_unlock(&hub->status_mutex);
@@ -961,7 +961,7 @@ static void hub_port_logical_disconnect(struct usb_hub *hub, int port1)
         */
 
        set_bit(port1, hub->change_bits);
-       kick_khubd(hub);
+       kick_khubd(hub);
 }
 
 /**
@@ -1366,7 +1366,7 @@ static int hub_configure(struct usb_hub *hub,
        if ((wHubCharacteristics & HUB_CHAR_COMPOUND) &&
                        !(hub_is_superspeed(hdev))) {
                int     i;
-               char    portstr [USB_MAXCHILDREN + 1];
+               char    portstr[USB_MAXCHILDREN + 1];
 
                for (i = 0; i < hdev->maxchild; i++)
                        portstr[i] = hub->descriptor->u.hs.DeviceRemovable
@@ -1434,32 +1434,32 @@ static int hub_configure(struct usb_hub *hub,
 
        /* Note 8 FS bit times == (8 bits / 12000000 bps) ~= 666ns */
        switch (wHubCharacteristics & HUB_CHAR_TTTT) {
-               case HUB_TTTT_8_BITS:
-                       if (hdev->descriptor.bDeviceProtocol != 0) {
-                               hub->tt.think_time = 666;
-                               dev_dbg(hub_dev, "TT requires at most %d "
-                                               "FS bit times (%d ns)\n",
-                                       8, hub->tt.think_time);
-                       }
-                       break;
-               case HUB_TTTT_16_BITS:
-                       hub->tt.think_time = 666 * 2;
-                       dev_dbg(hub_dev, "TT requires at most %d "
-                                       "FS bit times (%d ns)\n",
-                               16, hub->tt.think_time);
-                       break;
-               case HUB_TTTT_24_BITS:
-                       hub->tt.think_time = 666 * 3;
-                       dev_dbg(hub_dev, "TT requires at most %d "
-                                       "FS bit times (%d ns)\n",
-                               24, hub->tt.think_time);
-                       break;
-               case HUB_TTTT_32_BITS:
-                       hub->tt.think_time = 666 * 4;
+       case HUB_TTTT_8_BITS:
+               if (hdev->descriptor.bDeviceProtocol != 0) {
+                       hub->tt.think_time = 666;
                        dev_dbg(hub_dev, "TT requires at most %d "
                                        "FS bit times (%d ns)\n",
-                               32, hub->tt.think_time);
-                       break;
+                               8, hub->tt.think_time);
+               }
+               break;
+       case HUB_TTTT_16_BITS:
+               hub->tt.think_time = 666 * 2;
+               dev_dbg(hub_dev, "TT requires at most %d "
+                               "FS bit times (%d ns)\n",
+                       16, hub->tt.think_time);
+               break;
+       case HUB_TTTT_24_BITS:
+               hub->tt.think_time = 666 * 3;
+               dev_dbg(hub_dev, "TT requires at most %d "
+                               "FS bit times (%d ns)\n",
+                       24, hub->tt.think_time);
+               break;
+       case HUB_TTTT_32_BITS:
+               hub->tt.think_time = 666 * 4;
+               dev_dbg(hub_dev, "TT requires at most %d "
+                               "FS bit times (%d ns)\n",
+                       32, hub->tt.think_time);
+               break;
        }
 
        /* probe() zeroes hub->indicator[] */
@@ -1565,7 +1565,7 @@ static int hub_configure(struct usb_hub *hub,
 
        /* maybe cycle the hub leds */
        if (hub->has_indicators && blinkenlights)
-               hub->indicator [0] = INDICATOR_CYCLE;
+               hub->indicator[0] = INDICATOR_CYCLE;
 
        for (i = 0; i < hdev->maxchild; i++) {
                ret = usb_hub_create_port_device(hub, i + 1);
@@ -1983,7 +1983,7 @@ static void choose_devnum(struct usb_device *udev)
                if (devnum >= 128)
                        devnum = find_next_zero_bit(bus->devmap.devicemap,
                                                    128, 1);
-               bus->devnum_next = ( devnum >= 127 ? 1 : devnum + 1);
+               bus->devnum_next = (devnum >= 127 ? 1 : devnum + 1);
        }
        if (devnum < 128) {
                set_bit(devnum, bus->devmap.devicemap);
@@ -2237,8 +2237,7 @@ static int usb_enumerate_device(struct usb_device *udev)
                udev->product = kstrdup("n/a (unauthorized)", GFP_KERNEL);
                udev->manufacturer = kstrdup("n/a (unauthorized)", GFP_KERNEL);
                udev->serial = kstrdup("n/a (unauthorized)", GFP_KERNEL);
-       }
-       else {
+       } else {
                /* read the standard strings and cache them if present */
                udev->product = usb_cache_string(udev, udev->descriptor.iProduct);
                udev->manufacturer = usb_cache_string(udev,
@@ -3113,8 +3112,8 @@ static int finish_port_resume(struct usb_device *udev)
  retry_reset_resume:
                status = usb_reset_and_verify_device(udev);
 
-       /* 10.5.4.5 says be sure devices in the tree are still there.
-        * For now let's assume the device didn't go crazy on resume,
+       /* 10.5.4.5 says be sure devices in the tree are still there.
+        * For now let's assume the device didn't go crazy on resume,
         * and device drivers will know about any resume quirks.
         */
        if (status == 0) {
@@ -3860,7 +3859,7 @@ EXPORT_SYMBOL_GPL(usb_enable_ltm);
  * Between connect detection and reset signaling there must be a delay
  * of 100ms at least for debounce and power-settling.  The corresponding
  * timer shall restart whenever the downstream port detects a disconnect.
- * 
+ *
  * Apparently there are some bluetooth and irda-dongles and a number of
  * low-speed devices for which this debounce period may last over a second.
  * Not covered by the spec - but easy to deal with.
@@ -4060,7 +4059,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
                udev->tt = &hub->tt;
                udev->ttport = port1;
        }
- 
+
        /* Why interleave GET_DESCRIPTOR and SET_ADDRESS this way?
         * Because device hardware and firmware is sometimes buggy in
         * this area, and this is how Linux has done it for ages.
@@ -4135,11 +4134,11 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
 #undef GET_DESCRIPTOR_BUFSIZE
                }
 
-               /*
-                * If device is WUSB, we already assigned an
-                * unauthorized address in the Connect Ack sequence;
-                * authorization will assign the final address.
-                */
+               /*
+                * If device is WUSB, we already assigned an
+                * unauthorized address in the Connect Ack sequence;
+                * authorization will assign the final address.
+                */
                if (udev->wusb == 0) {
                        for (j = 0; j < SET_ADDRESS_TRIES; ++j) {
                                retval = hub_set_address(udev, devnum);
@@ -4168,7 +4167,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
                        msleep(10);
                        if (USE_NEW_SCHEME(retry_counter) && !(hcd->driver->flags & HCD_USB3))
                                break;
-               }
+               }
 
                retval = usb_get_device_descriptor(udev, 8);
                if (retval < 8) {
@@ -4224,7 +4223,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
                udev->ep0.desc.wMaxPacketSize = cpu_to_le16(i);
                usb_ep0_reinit(udev);
        }
-  
+
        retval = usb_get_device_descriptor(udev, USB_DT_DEVICE_SIZE);
        if (retval < (signed)sizeof(udev->descriptor)) {
                if (retval != -ENODEV)
@@ -4321,7 +4320,7 @@ hub_power_remaining (struct usb_hub *hub)
        }
        if (remaining < 0) {
                dev_warn(hub->intfdev, "%dmA over power budget!\n",
-                       - remaining);
+                       -remaining);
                remaining = 0;
        }
        return remaining;
@@ -4432,7 +4431,7 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1,
                        set_port_feature(hdev, port1, USB_PORT_FEAT_POWER);
 
                if (portstatus & USB_PORT_STAT_ENABLE)
-                       goto done;
+                       goto done;
                return;
        }
        if (hub_is_superspeed(hub->hdev))
@@ -4455,7 +4454,7 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1,
                }
 
                usb_set_device_state(udev, USB_STATE_POWERED);
-               udev->bus_mA = hub->mA_per_port;
+               udev->bus_mA = hub->mA_per_port;
                udev->level = hdev->level + 1;
                udev->wusb = hub_is_wusb(hub);
 
@@ -4509,7 +4508,7 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1,
                                goto loop_disable;
                        }
                }
- 
+
                /* check for devices running slower than they could */
                if (le16_to_cpu(udev->descriptor.bcdUSB) >= 0x0200
                                && udev->speed == USB_SPEED_FULL
@@ -4569,7 +4568,7 @@ loop:
                        dev_err(hub_dev, "unable to enumerate USB device on port %d\n",
                                        port1);
        }
- 
+
 done:
        hub_port_disable(hub, port1, 1);
        if (hcd->driver->relinquish_port && !hub->hdev->parent)
@@ -4734,7 +4733,7 @@ static void hub_events(void)
                                 * EM interference sometimes causes badly
                                 * shielded USB devices to be shutdown by
                                 * the hub, this hack enables them again.
-                                * Works at least with mouse driver. 
+                                * Works at least with mouse driver.
                                 */
                                if (!(portstatus & USB_PORT_STAT_ENABLE)
                                    && !connect_change
@@ -4846,7 +4845,7 @@ static void hub_events(void)
                                dev_dbg(hub_dev, "over-current change\n");
                                clear_hub_feature(hdev, C_HUB_OVER_CURRENT);
                                msleep(500);    /* Cool down */
-                               hub_power_on(hub, true);
+                               hub_power_on(hub, true);
                                hub_hub_status(hub, &status, &unused);
                                if (status & HUB_STATUS_OVERCURRENT)
                                        dev_err(hub_dev, "over-current "
@@ -4866,7 +4865,7 @@ static void hub_events(void)
                usb_unlock_device(hdev);
                kref_put(&hub->kref, hub_release);
 
-        } /* end while (1) */
+       } /* end while (1) */
 }
 
 static int hub_thread(void *__unused)
@@ -4891,7 +4890,7 @@ static int hub_thread(void *__unused)
 
 static const struct usb_device_id hub_id_table[] = {
     { .match_flags = USB_DEVICE_ID_MATCH_VENDOR
-                  | USB_DEVICE_ID_MATCH_INT_CLASS,
+                       | USB_DEVICE_ID_MATCH_INT_CLASS,
       .idVendor = USB_VENDOR_GENESYS_LOGIC,
       .bInterfaceClass = USB_CLASS_HUB,
       .driver_info = HUB_QUIRK_CHECK_PORT_AUTOSUSPEND},
@@ -5125,13 +5124,13 @@ static int usb_reset_and_verify_device(struct usb_device *udev)
 
        if (ret < 0)
                goto re_enumerate;
- 
+
        /* Device might have changed firmware (DFU or similar) */
        if (descriptors_changed(udev, &descriptor, bos)) {
                dev_info(&udev->dev, "device firmware changed\n");
                udev->descriptor = descriptor;  /* for disconnect() calls */
                goto re_enumerate;
-       }
+       }
 
        /* Restore the device's previous configuration */
        if (!udev->actconfig)
@@ -5156,7 +5155,7 @@ static int usb_reset_and_verify_device(struct usb_device *udev)
                        udev->actconfig->desc.bConfigurationValue, ret);
                mutex_unlock(hcd->bandwidth_mutex);
                goto re_enumerate;
-       }
+       }
        mutex_unlock(hcd->bandwidth_mutex);
        usb_set_device_state(udev, USB_STATE_CONFIGURED);
 
@@ -5203,7 +5202,7 @@ done:
        usb_release_bos_descriptor(udev);
        udev->bos = bos;
        return 0;
- 
+
 re_enumerate:
        /* LPM state doesn't matter when we're about to destroy the device. */
        hub_port_logical_disconnect(parent_hub, port1);

diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c
index 59cb5f9..5cf431b 100644 (file)
--- a/drivers/usb/core/sysfs.c
+++ b/drivers/usb/core/sysfs.c
@@ -398,7 +398,8 @@ static DEVICE_ATTR_RW(autosuspend);
 static const char on_string[] = "on";
 static const char auto_string[] = "auto";
 
-static void warn_level(void) {
+static void warn_level(void)
+{
        static int level_warned;
 
        if (!level_warned) {
@@ -652,7 +653,7 @@ static ssize_t authorized_store(struct device *dev,
                result = usb_deauthorize_device(usb_dev);
        else
                result = usb_authorize_device(usb_dev);
-       return result < 0? result : size;
+       return result < 0 ? result : size;
 }
 static DEVICE_ATTR_IGNORE_LOCKDEP(authorized, S_IRUGO | S_IWUSR,
                                  authorized_show, authorized_store);

diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c
index 0a6ee2e..4d11449 100644 (file)
--- a/drivers/usb/core/usb.c
+++ b/drivers/usb/core/usb.c
@@ -497,7 +497,7 @@ struct usb_device *usb_alloc_dev(struct usb_device *parent,
                dev->authorized = 1;
        else {
                dev->authorized = usb_hcd->authorized_default;
-               dev->wusb = usb_bus_is_wusb(bus)? 1 : 0;
+               dev->wusb = usb_bus_is_wusb(bus) ? 1 : 0;
        }
        return dev;
 }