examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
- spi0 {
+ spi {
#address-cells = <1>;
#size-cells = <0>;
- |
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
- spi0 {
+ spi {
#address-cells = <1>;
#size-cells = <0>;
- |
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
- i2c0 {
+ i2c {
#address-cells = <1>;
#size-cells = <0>;
- |
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
- i2c0 {
+ i2c {
#address-cells = <1>;
#size-cells = <0>;
- |
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
- spi0 {
+ spi {
#address-cells = <1>;
#size-cells = <0>;
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
- spi0 {
+ spi {
#address-cells = <1>;
#size-cells = <0>;
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
- i2c0 {
+ i2c {
#address-cells = <1>;
#size-cells = <0>;
};
- |
#include <dt-bindings/interrupt-controller/irq.h>
- spi0 {
+ spi {
#address-cells = <1>;
#size-cells = <0>;
examples:
- |
- spi0 {
+ spi {
#address-cells = <1>;
#size-cells = <0>;
- |
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
- spi0 {
+ spi {
#address-cells = <1>;
#size-cells = <0>;
examples:
- |
#include <dt-bindings/gpio/gpio.h>
- spi0 {
+ spi {
#address-cells = <1>;
#size-cells = <0>;
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
- spmi_bus {
+ spmi {
#address-cells = <1>;
#size-cells = <0>;
pmic_iadc: adc@3600 {
examples:
- |
- stmpe {
- stmpe_adc {
- compatible = "st,stmpe-adc";
- st,norequest-mask = <0x0F>; /* dont use ADC CH3-0 */
- };
+ adc {
+ compatible = "st,stmpe-adc";
+ st,norequest-mask = <0x0f>; /* dont use ADC CH3-0 */
};
...
examples:
- |
- spi0 {
+ spi {
#address-cells = <1>;
#size-cells = <0>;
- |
#include <dt-bindings/interrupt-controller/irq.h>
- i2c0 {
+ i2c {
#address-cells = <1>;
#size-cells = <0>;
interrupt-names = "INT1";
};
};
- spi0 {
+ spi {
#address-cells = <1>;
#size-cells = <0>;
#address-cells = <1>;
#size-cells = <0>;
- heart_mon@0 {
+ heart-mon@0 {
compatible = "ti,afe4403";
reg = <0>;
spi-max-frequency = <10000000>;
#address-cells = <1>;
#size-cells = <0>;
- heart_mon@58 {
+ heart-mon@58 {
compatible = "ti,afe4404";
reg = <0x58>;
tx-supply = <&vbat>;
examples:
- |
- humidity_sensor {
+ humidity-sensor {
compatible = "dht11";
gpios = <&gpio0 6 0>;
};
examples:
- |
- i2c0 {
+ i2c {
#address-cells = <1>;
#size-cells = <0>;
- |
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
- spi0 {
+ spi {
#address-cells = <1>;
#size-cells = <0>;
- |
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
- i2c0 {
+ i2c {
#address-cells = <1>;
#size-cells = <0>;
- |
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
- spi0 {
+ spi {
#address-cells = <1>;
#size-cells = <0>;
- |
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
- i2c0 {
+ i2c {
#address-cells = <1>;
#size-cells = <0>;
- |
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
- spi0 {
+ spi {
#address-cells = <1>;
#size-cells = <0>;
- |
#include <dt-bindings/interrupt-controller/irq.h>
- i2c0 {
+ i2c {
#address-cells = <1>;
#size-cells = <0>;
- |
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
- i2c0 {
+ i2c {
#address-cells = <1>;
#size-cells = <0>;
pressure@77 {
#address-cells = <1>;
#size-cells = <0>;
- temp_sensor@0 {
+ temperature-sensor@0 {
compatible = "maxim,max31865";
reg = <0>;
spi-max-frequency = <400000>;