mmc:fsl_esdhc invalidate dcache before read

DCIMVAC is upgraded to DCCIMVAC for the individual processor
(Cortex-A7) that the DCIMVAC is executed on.

We should follow the linux dma follow. Before DMA read, first
invalidate dcache then after DMA read, invalidate dcache again.

With the DMA direction DMA_FROM_DEVICE, the dcache need be
invalidated again after the DMA completion. The reason is
that we need explicity make sure the dcache been invalidated
thus to get the DMA'ed memory correctly from the physical memory.
Any cache-line fill during the DMA operations such as the
pre-fetching can cause the DMA coherency issue, thus CPU get the stale data.

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Signed-off-by: Ye.Li <B37916@freescale.com>
Signed-off-by: Nitin Garg <nitin.garg@freescale.com>
Signed-off-by: Jason Liu <r64343@freescale.com>
Reviewed-by: Stefano Babic <sbabic@denx.de>

diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c
index c4719e6f3635b6396ea731c8c624199d17cdc335..0510bf02f41bbf28d2b93ed0ae4f958da358d230 100644 (file)
--- a/drivers/mmc/fsl_esdhc.c
+++ b/drivers/mmc/fsl_esdhc.c
@@ -341,6 +341,9 @@ esdhc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data)
                err = esdhc_setup_data(mmc, data);
                if(err)
                        return err;
+
+               if (data->flags & MMC_DATA_READ)
+                       check_and_invalidate_dcache_range(cmd, data);
        }
 
        /* Figure out the transfer arguments */
@@ -437,6 +440,11 @@ esdhc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data)
                        }
                } while ((irqstat & DATA_COMPLETE) != DATA_COMPLETE);
 
+               /*
+                * Need invalidate the dcache here again to avoid any
+                * cache-fill during the DMA operations such as the
+                * speculative pre-fetching etc.
+                */
                if (data->flags & MMC_DATA_READ)
                        check_and_invalidate_dcache_range(cmd, data);
 #endif