rockchip: rk3399: Add Ficus EE board support

Add board support for Ficus EE board from Vamrs. This board utilizes
common Rock960 family support.

Following peripherals are tested and known to work:
* Gigabit Ethernet
* USB 2.0
* MMC

Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
[Reworked based on common Rock960 family support]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index dc319bc..949ee47 100644 (file)
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -42,6 +42,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
        rk3288-veyron-minnie.dtb \
        rk3288-vyasa.dtb \
        rk3328-evb.dtb \
+       rk3399-ficus.dtb \
        rk3368-lion.dtb \
        rk3368-sheep.dtb \
        rk3368-geekbox.dtb \

diff --git a/arch/arm/dts/rk3399-ficus.dts b/arch/arm/dts/rk3399-ficus.dts
new file mode 100644 (file)
index 0000000..4af0e4e
--- /dev/null
+++ b/arch/arm/dts/rk3399-ficus.dts
@@ -0,0 +1,78 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 Collabora Ltd.
+ * Copyright (c) 2018 Fuzhou Rockchip Electronics Co., Ltd.
+ *
+ * Schematics available at https://dl.vamrs.com/products/ficus/docs/hw
+ */
+
+/dts-v1/;
+#include "rk3399-rock960.dtsi"
+#include "rk3399-sdram-ddr3-1600.dtsi"
+
+/ {
+       model = "96boards RK3399 Ficus";
+       compatible = "vamrs,ficus", "rockchip,rk3399";
+
+       chosen {
+               stdout-path = "serial2:1500000n8";
+       };
+
+       clkin_gmac: external-gmac-clock {
+               compatible = "fixed-clock";
+               clock-frequency = <125000000>;
+               clock-output-names = "clkin_gmac";
+               #clock-cells = <0>;
+       };
+};
+
+&gmac {
+       assigned-clocks = <&cru SCLK_RMII_SRC>;
+       assigned-clock-parents = <&clkin_gmac>;
+       clock_in_out = "input";
+       phy-supply = <&vcc3v3_sys>;
+       phy-mode = "rgmii";
+       pinctrl-names = "default";
+       pinctrl-0 = <&rgmii_pins>;
+       snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+       snps,reset-active-low;
+       snps,reset-delays-us = <0 10000 50000>;
+       tx_delay = <0x28>;
+       rx_delay = <0x11>;
+       status = "okay";
+};
+
+&pcie0 {
+       ep-gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_HIGH>;
+};
+
+&pinctrl {
+       gmac {
+               rgmii_sleep_pins: rgmii-sleep-pins {
+                       rockchip,pins =
+                               <3 15 RK_FUNC_GPIO &pcfg_output_low>;
+               };
+       };
+
+       pcie {
+               pcie_drv: pcie-drv {
+                       rockchip,pins =
+                               <1 24 RK_FUNC_GPIO &pcfg_pull_none>;
+                       };
+       };
+
+       usb2 {
+               host_vbus_drv: host-vbus-drv {
+                       rockchip,pins =
+                               <4 27 RK_FUNC_GPIO &pcfg_pull_none>;
+               };
+       };
+};
+
+&vcc3v3_pcie {
+       gpio = <&gpio1 24 GPIO_ACTIVE_HIGH>;
+};
+
+&vcc5v0_host {
+       gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>;
+};

diff --git a/configs/ficus-rk3399_defconfig b/configs/ficus-rk3399_defconfig
new file mode 100644 (file)
index 0000000..e890bc2
--- /dev/null
+++ b/configs/ficus-rk3399_defconfig
@@ -0,0 +1,71 @@
+CONFIG_ARM=y
+CONFIG_ARCH_ROCKCHIP=y
+CONFIG_SYS_TEXT_BASE=0x00200000
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SYS_MALLOC_F_LEN=0x4000
+CONFIG_ROCKCHIP_RK3399=y
+CONFIG_TARGET_ROCK960_RK3399=y
+CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x4000
+CONFIG_DEBUG_UART_BASE=0xFF1A0000
+CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_SPL_STACK_R_ADDR=0x80000
+CONFIG_DEFAULT_DEVICE_TREE="rk3399-ficus"
+CONFIG_DEBUG_UART=y
+CONFIG_FIT=y
+CONFIG_SPL_LOAD_FIT=y
+CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-rockchip/make_fit_atf.py"
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_SPL_STACK_R=y
+CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x4000
+CONFIG_SPL_ATF=y
+CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y
+CONFIG_CMD_BOOTZ=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_USB=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_TIME=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
+CONFIG_ENV_IS_IN_MMC=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_REGMAP=y
+CONFIG_SPL_REGMAP=y
+CONFIG_SYSCON=y
+CONFIG_SPL_SYSCON=y
+CONFIG_CLK=y
+CONFIG_SPL_CLK=y
+CONFIG_ROCKCHIP_GPIO=y
+CONFIG_SYS_I2C_ROCKCHIP=y
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_ROCKCHIP=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_ROCKCHIP=y
+CONFIG_DM_ETH=y
+CONFIG_ETH_DESIGNWARE=y
+CONFIG_RGMII=y
+CONFIG_GMAC_ROCKCHIP=y
+CONFIG_PINCTRL=y
+CONFIG_SPL_PINCTRL=y
+CONFIG_PINCTRL_ROCKCHIP_RK3399=y
+CONFIG_DM_PMIC=y
+CONFIG_PMIC_RK8XX=y
+CONFIG_REGULATOR_PWM=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_DM_REGULATOR_GPIO=y
+CONFIG_REGULATOR_RK8XX=y
+CONFIG_PWM_ROCKCHIP=y
+CONFIG_RAM=y
+CONFIG_SPL_RAM=y
+CONFIG_BAUDRATE=1500000
+CONFIG_DEBUG_UART_SHIFT=2
+CONFIG_SYSRESET=y
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_GENERIC=y
+CONFIG_USB_STORAGE=y
+CONFIG_USE_TINY_PRINTF=y
+CONFIG_ERRNO_STR=y