--- /dev/null
+Keith Packard, HP
+Eric Anholt, Intel
--- /dev/null
+
+Copyright © 2001,2003 Keith Packard
+Copyright © 2007 Eric Anholt
+
+Permission to use, copy, modify, distribute, and sell this software and its
+documentation for any purpose is hereby granted without fee, provided that
+the above copyright notice appear in all copies and that both that
+copyright notice and this permission notice appear in supporting
+documentation, and that the name of Keith Packard not be used in
+advertising or publicity pertaining to distribution of the software without
+specific, written prior permission. Keith Packard makes no
+representations about the suitability of this software for any purpose. It
+is provided "as is" without express or implied warranty.
+
+KEITH PACKARD DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
+INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
+EVENT SHALL KEITH PACKARD BE LIABLE FOR ANY SPECIAL, INDIRECT OR
+CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
+DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
+TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+PERFORMANCE OF THIS SOFTWARE.
+
--- /dev/null
+commit 8abc1c8e920821f5ed68e639d3fb71a4ad90a102
+Author: Alan Coopersmith <alan.coopersmith@oracle.com>
+Date: Tue Jun 8 18:50:45 2010 -0700
+
+ libXdamage 1.1.3
+
+ Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
+
+commit 0b0b68a2a06f01ad3e185aafb2e9665779bc0084
+Author: Matthieu Herrb <matthieu.herrb@laas.fr>
+Date: Sun Mar 9 07:56:45 2008 +0100
+
+ nuke RCS Ids
+
+ Signed-off-by: Matthieu Herrb <matthieu.herrb@laas.fr>
+ Reviewed by: Alan Coopersmith <alan.coopersmith@oracle.com>
+
+commit 5a77a5e402ab245f2de08886e5fb2934a6c54571
+Author: Jamey Sharp <jamey@minilop.net>
+Date: Fri Apr 9 17:26:07 2010 -0700
+
+ Always call SyncHandle after issuing an X request.
+
+commit a414d85a9da3f5b23975a64c351ad00138092107
+Author: Gaetan Nadon <memsize@videotron.ca>
+Date: Mon Mar 29 16:50:34 2010 -0400
+
+ config: update AC_PREREQ statement to 2.60
+
+ Unrelated to the previous patches, the new value simply reflects
+ the reality that the minimum level for autoconf to configure
+ all x.org modules is 2.60 dated June 2006.
+
+ ftp://ftp.gnu.org/gnu/autoconf/autoconf-2.60.tar.gz
+
+ Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
+
+commit f8914c5dba4c6514b83c7d8f5c550a2603e4da66
+Author: Gaetan Nadon <memsize@videotron.ca>
+Date: Mon Mar 29 14:53:48 2010 -0400
+
+ config: remove the pkgconfig pc.in file from EXTRA_DIST
+
+ Automake always includes it in the tarball.
+
+ Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
+
+commit 5dd2b14345ba9b8b88d11dc027dc71625fbf15bc
+Author: Gaetan Nadon <memsize@videotron.ca>
+Date: Fri Nov 27 20:56:04 2009 -0500
+
+ Makefile.am: add ChangeLog and INSTALL on MAINTAINERCLEANFILES
+
+ Now that the INSTALL file is generated.
+ Allows running make maintainer-clean.
+
+commit 98333e9afea1c5dfb0f4b90c10f25e6b77e72817
+Author: Gaetan Nadon <memsize@videotron.ca>
+Date: Wed Oct 28 14:09:10 2009 -0400
+
+ INSTALL, NEWS, README or AUTHORS files are missing/incorrect #24206
+
+ Add missing INSTALL file. Use standard GNU file on building tarball
+ README may have been updated
+ Remove AUTHORS file as it is empty and no content available yet.
+ Remove NEWS file as it is empty and no content available yet.
+
+commit 62d595bc01c0219254560b72978faa3327959eee
+Author: Gaetan Nadon <memsize@videotron.ca>
+Date: Tue Oct 27 15:07:25 2009 -0400
+
+ Deploy the new XORG_DEFAULT_OPTIONS #24242
+
+ This macro aggregate a number of existing macros that sets commmon
+ X.Org components configuration options. It shields the configuration file from
+ future changes.
+
+commit 6852db03b187cfce5a41cc8addbc734091e6b725
+Author: Gaetan Nadon <memsize@videotron.ca>
+Date: Mon Oct 26 22:08:42 2009 -0400
+
+ Makefile.am: ChangeLog not required: EXTRA_DIST or *CLEANFILES #24432
+
+ ChangeLog filename is known to Automake and requires no further
+ coding in the makefile.
+
+commit ef9fad1a1f327c1f19009d4206c67762ef0d436a
+Author: Gaetan Nadon <memsize@videotron.ca>
+Date: Thu Oct 22 13:10:20 2009 -0400
+
+ .gitignore: use common defaults with custom section # 24239
+
+ Using common defaults will reduce errors and maintenance.
+ Only the very small or inexistent custom section need periodic maintenance
+ when the structure of the component changes. Do not edit defaults.
+
+commit d9ff5ede9989b0312416fd68fc3dd866c551aad9
+Author: Gaetan Nadon <memsize@videotron.ca>
+Date: Thu Oct 22 12:34:19 2009 -0400
+
+ .gitignore: use common defaults with custom section # 24239
+
+ Using common defaults will reduce errors and maintenance.
+ Only the very small or inexistent custom section need periodic maintenance
+ when the structure of the component changes. Do not edit defaults.
+
+commit 8a02e2cfe8cfcaa791b81b47e44304f326a0dcb8
+Author: Jeremy Huddleston <jeremyhu@freedesktop.org>
+Date: Wed Oct 21 12:47:24 2009 -0700
+
+ This is not a GNU project, so declare it foreign.
+
+ On Wed, 2009-10-21 at 13:36 +1000, Peter Hutterer wrote:
+ > On Tue, Oct 20, 2009 at 08:23:55PM -0700, Jeremy Huddleston wrote:
+ > > I noticed an INSTALL file in xlsclients and libXvMC today, and it
+ > > was quite annoying to work around since 'autoreconf -fvi' replaces
+ > > it and git wants to commit it. Should these files even be in git?
+ > > Can I nuke them for the betterment of humanity and since they get
+ > > created by autoreconf anyways?
+ >
+ > See https://bugs.freedesktop.org/show_bug.cgi?id=24206
+
+ As an interim measure, replace AM_INIT_AUTOMAKE([dist-bzip2]) with
+ AM_INIT_AUTOMAKE([foreign dist-bzip2]). This will prevent the generation
+ of the INSTALL file. It is also part of the 24206 solution.
+
+ Signed-off-by: Jeremy Huddleston <jeremyhu@freedesktop.org>
+
+commit 728ae9bda2e536897b630b149df522fa6286a1c5
+Author: Alan Coopersmith <alan.coopersmith@sun.com>
+Date: Tue Oct 6 11:24:50 2009 -0700
+
+ libXdamage 1.1.2
+
+ Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
+
+commit 229ebbc4acd3de3a4a118f53db013629691b6ce9
+Author: Alan Coopersmith <alan.coopersmith@sun.com>
+Date: Tue Oct 6 11:18:39 2009 -0700
+
+ Migrate to xorg macros 1.3 & XORG_DEFAULT_OPTIONS
+
+ Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
+
+commit eed319fd48299e49b2f6ae9ff452a5d6c64ea192
+Author: Peter Hutterer <peter.hutterer@who-t.net>
+Date: Thu Sep 3 15:50:23 2009 +1000
+
+ Require pkg-config to find the packages, no funky x11 lookups.
+
+ Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
+ Acked-by: Daniel Stone <daniel@fooishbar.org>
+
+commit c3f08b7b0a0b1dd42dd00efe07ebc07f7085b433
+Author: Peter Hutterer <peter.hutterer@who-t.net>
+Date: Thu Sep 3 15:50:18 2009 +1000
+
+ Fix a comment in configure.ac, this is libXdamage, not libXfixes
+
+ Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
+
+commit 02a61d40687f4ee358e2f7903ce0ceacf273e254
+Author: Alan Coopersmith <alan.coopersmith@sun.com>
+Date: Mon Feb 2 20:34:32 2009 -0800
+
+ Add README with pointers to mailing list, bugzilla & git repos
+
+ Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
+
+commit 0a48e5c663bf2ec3f6870bf9e9cfa90dfddd6fe6
+Author: Paulo Cesar Pereira de Andrade <pcpa@mandriva.com.br>
+Date: Thu Jan 29 15:41:23 2009 -0200
+
+ Janitor: Correct make distcheck and compiler warnings.
+
+commit 0ca7d78aeb8035ef52c1415170e1257493d789fd
+Author: Peter Hutterer <peter@cs.unisa.edu.au>
+Date: Mon May 19 17:24:04 2008 +0930
+
+ Change parameter names for QueryVersion/QueryExtension.
+
+ Simply to clarify the inner workings of the lib and that these parameters are
+ treated as return values only.
+
+ X.Org Bug 14511 <http://bugs.freedesktop.org/show_bug.cgi?id=14511>
+
+commit 87ebfbc56abe16de6f84f559728a40f63d44006a
+Author: James Cloos <cloos@jhcloos.com>
+Date: Thu Dec 6 16:38:26 2007 -0500
+
+ Replace static ChangeLog with dist-hook to generate from git log
+
+commit d9714f03dde2d2b20fb29d46b44bb253e4954ee0
+Author: Ryan Lortie <desrt@desrt.ca>
+Date: Fri Sep 7 22:02:18 2007 -0700
+
+ libXdamage incorrectly encodes/decodes the 'More' field from the event.
+
+ The client library for xdamage currently fails to fill in the 'more'
+ field. As a result, you get whatever uninitialised junk was there
+ before.
+
+ The server sets the high bit of 'level' when there is
+ 'more' (DamageNotifyMore = 0x80). A patch follows to fix the client
+ library.
+
+commit 7548981a458b091b29d74207884669214f63ee9f
+Author: James Cloos <cloos@jhcloos.com>
+Date: Mon Sep 3 05:53:36 2007 -0400
+
+ Add *~ to .gitignore to skip patch/emacs droppings
+
+commit b96e17d8a4fe8e19515c0f183e5e299939c6eca0
+Author: Adam Jackson <ajax@benzedrine.nwnk.net>
+Date: Mon Mar 5 16:51:06 2007 -0500
+
+ Fix DSO version number to match protocol number.
+
+ Also increment package version number to 1.1.1 for eventual release.
+
+commit 0b69465a3b118f3fe1c9b0c206996d510ccbec36
+Author: Eric Anholt <eric@anholt.net>
+Date: Tue Jan 9 16:21:13 2007 -0800
+
+ Track rename of DamagePost to DamageAdd.
+
+commit 0d7f8e4f151480ee1415bd5a13799ad6385a8df3
+Author: Eric Anholt <eric@anholt.net>
+Date: Mon Jan 8 15:02:42 2007 -0800
+
+ More doc/copyright updates for Damage 1.1 update.
+
+commit 716d84889f90880c634136e9c1e754edd587ea9e
+Author: Eric Anholt <eric@anholt.net>
+Date: Fri Jan 5 17:56:58 2007 -0800
+
+ Add a request to report a region of damage against a drawable.
+
+ This brings the library up to supporting version 1.1 of the protocol. Bump
+ package version accordingly.
+
+commit c3c2777a7805c95f7d7bf64998e188d0eba65cba
+Author: Daniel Stone <daniel@fooishbar.org>
+Date: Wed Nov 8 16:10:20 2006 +0200
+
+ bump to 1.0.4
+
+commit 31829be123a9ce58bf8e0c4718815b7b63d0d512
+Author: Josh Triplett <josh@freedesktop.org>
+Date: Mon Oct 16 02:58:24 2006 -0700
+
+ Remove incorrect UnlockDisplay and SyncHandle from XDamageQueryVersion
+
+ XDamageQueryVersion calls UnlockDisplay and SyncHandle, without a matching
+ LockDisplay. This triggers an assertion in Xlib/XCB designed to catch these
+ kinds of bugs. Remove the two calls, which fixes the assertion.
+
+ Thanks to Mike Auty <mike.auty@gmail.com> for the report.
+
+commit 62ffc46be52244b252dfab643bdfa1aa862820f0
+Author: Alan Coopersmith <alan.coopersmith@sun.com>
+Date: Thu Jul 13 14:58:51 2006 -0700
+
+ renamed: .cvsignore -> .gitignore
+
+commit 7558d929f538ef7c87aeb88a47856f94282ab2a9
+Author: Adam Jackson <ajax@nwnk.net>
+Date: Thu Apr 27 00:05:40 2006 +0000
+
+ Bump to 1.0.3
+
+commit e05bfca0a4377cfd137249f7df8c95706372c140
+Author: Adam Jackson <ajax@nwnk.net>
+Date: Mon Apr 3 01:00:11 2006 +0000
+
+ Coverity #574: Plug a leak on the error path.
+
+commit 660305b57b0af382dd111d8a9d0a38f663efdf25
+Author: Kevin E Martin <kem@kem.org>
+Date: Thu Dec 15 00:24:29 2005 +0000
+
+ Update package version number for final X11R7 release candidate.
+
+commit 75bb1e7a7f32d2bf8e3e80ae370adc0c69585698
+Author: Kevin E Martin <kem@kem.org>
+Date: Sat Dec 3 05:49:43 2005 +0000
+
+ Update package version number for X11R7 RC3 release.
+
+commit 5805e223e70e84d07f9203ae30effcbbc40746a6
+Author: Kevin E Martin <kem@kem.org>
+Date: Sat Nov 19 07:15:41 2005 +0000
+
+ Update pkgconfig files to separate library build-time dependencies from
+ application build-time dependencies, and update package deps to work
+ with separate build roots.
+
+commit 48527807411901e1d6806a2c9e8a84e1fa684042
+Author: Kevin E Martin <kem@kem.org>
+Date: Wed Nov 9 21:19:12 2005 +0000
+
+ Update package version number for X11R7 RC2 release.
+
+commit 077ce8402a1f8413efdede402cb6f89b9ff797dd
+Author: Kevin E Martin <kem@kem.org>
+Date: Tue Nov 1 15:11:51 2005 +0000
+
+ Update pkgcheck dependencies to work with separate build roots.
+
+commit c6a8324c38acc33357e6dcf927f482db22383ab2
+Author: Kevin E Martin <kem@kem.org>
+Date: Fri Jul 29 21:22:51 2005 +0000
+
+ Various changes preparing packages for RC0:
+ - Verify and update package version numbers as needed
+ - Implement versioning scheme
+ - Change bug address to point to bugzilla bug entry form
+ - Disable loadable i18n in libX11 by default (use --enable-loadable-i18n to
+ reenable it)
+ - Fix makedepend to use pkgconfig and pass distcheck
+ - Update build script to build macros first
+ - Update modular Xorg version
+
+commit b02c66e05a173fd20c7b42f4fccf5bcd069f5931
+Author: Daniel Stone <daniel@fooishbar.org>
+Date: Sat Jul 16 06:37:24 2005 +0000
+
+ Set soversion to 1.0.0 using -version-number.
+
+commit 4011ede413408c9a5577617dbcd1124a3ee8dce5
+Author: Adam Jackson <ajax@nwnk.net>
+Date: Thu Jul 14 06:28:45 2005 +0000
+
+ Thinkos. AC_SUBST on the damageproto CFLAGS, and s/AM__CFLAGS/AM_CFLAGS/.
+
+commit 657bb1fcc90a08f713c8f97c4f904808ea023c6e
+Author: Keith Packard <keithp@keithp.com>
+Date: Sat Jul 9 06:14:50 2005 +0000
+
+ Add .cvsignore files Switch _la_CFLAGS for AM_CFLAGS to clean up directory
+
+commit 575cf8f35bb51df34d31035fcbf7d425f85ac79c
+Author: Daniel Stone <daniel@fooishbar.org>
+Date: Sun Jul 3 07:00:56 2005 +0000
+
+ Add Xtrans definitions (FONT_t, TRANS_CLIENT) to clean up warnings.
+ Add XSERV_t, TRANS_SERVER, TRANS_REOPEN to quash warnings.
+ Add #include <dix-config.h> or <xorg-config.h>, as appropriate, to all
+ source files in the xserver/xorg tree, predicated on defines of
+ HAVE_{DIX,XORG}_CONFIG_H. Change all Xfont includes to
+ <X11/fonts/foo.h>.
+
+commit 7a89fded1dac6137a9376bf161da22c1c93a9939
+Author: Kevin E Martin <kem@kem.org>
+Date: Sat Jul 2 06:35:03 2005 +0000
+
+ Add appropriate lib*_CFLAGS to Makefile.am's -- fixes build problems
+
+commit c04e1d2204ae972828b19bf422670e480805e9ac
+Author: Adam Jackson <ajax@nwnk.net>
+Date: Thu May 19 00:22:32 2005 +0000
+
+ revert last change, didn't do right thing at all, sorry for the noise
+
+commit 00361b6bec032a3be14e2a191b389115ec9767ba
+Author: Adam Jackson <ajax@nwnk.net>
+Date: Thu May 19 00:10:07 2005 +0000
+
+ Require automake 1.7 in AM_INIT_AUTOMAKE
+
+commit 4b9f6d209d2833afb58c2f2e648907f460d1be95
+Author: Søren Sandmann Pedersen <sandmann@daimi.au.dk>
+Date: Tue May 17 17:02:24 2005 +0000
+
+ Conditionally include config.h in xc/lib/Xdamage and xc/lib/Xfixes
+
+commit daa2ab8a2deff5730713c38322be53ed8facae74
+Author: Søren Sandmann Pedersen <sandmann@daimi.au.dk>
+Date: Tue May 17 16:47:59 2005 +0000
+
+ Add Xdamage build system
+
+commit a9055b6135f82bafefd05b140c9ec4a6d0b1fc9f
+Author: Markus Kuhn <Markus.Kuhn@cl.cam.ac.uk>
+Date: Sat Dec 4 00:42:47 2004 +0000
+
+ Encoding of numerous files changed to UTF-8
+
+commit 1945ec8dea6d16523f480b423b5e7054928c2eea
+Author: Eric Anholt <anholt@freebsd.org>
+Date: Sat Jul 31 05:50:39 2004 +0000
+
+ Bring in Xfixes, Xdamage, and Xcomposite userland from xserver CVS:
+ - Update Xfixes headers to protocol major version 3.
+ - Add composite headers.
+ - Add libXfixes, libXdamage, and libXcomposite.
+ - Add imake glue for new libraries, but leave Composite off by default
+ until issues are resolved.
--- /dev/null
+Installation Instructions
+*************************
+
+Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005,
+2006, 2007, 2008 Free Software Foundation, Inc.
+
+ This file is free documentation; the Free Software Foundation gives
+unlimited permission to copy, distribute and modify it.
+
+Basic Installation
+==================
+
+ Briefly, the shell commands `./configure; make; make install' should
+configure, build, and install this package. The following
+more-detailed instructions are generic; see the `README' file for
+instructions specific to this package.
+
+ The `configure' shell script attempts to guess correct values for
+various system-dependent variables used during compilation. It uses
+those values to create a `Makefile' in each directory of the package.
+It may also create one or more `.h' files containing system-dependent
+definitions. Finally, it creates a shell script `config.status' that
+you can run in the future to recreate the current configuration, and a
+file `config.log' containing compiler output (useful mainly for
+debugging `configure').
+
+ It can also use an optional file (typically called `config.cache'
+and enabled with `--cache-file=config.cache' or simply `-C') that saves
+the results of its tests to speed up reconfiguring. Caching is
+disabled by default to prevent problems with accidental use of stale
+cache files.
+
+ If you need to do unusual things to compile the package, please try
+to figure out how `configure' could check whether to do them, and mail
+diffs or instructions to the address given in the `README' so they can
+be considered for the next release. If you are using the cache, and at
+some point `config.cache' contains results you don't want to keep, you
+may remove or edit it.
+
+ The file `configure.ac' (or `configure.in') is used to create
+`configure' by a program called `autoconf'. You need `configure.ac' if
+you want to change it or regenerate `configure' using a newer version
+of `autoconf'.
+
+The simplest way to compile this package is:
+
+ 1. `cd' to the directory containing the package's source code and type
+ `./configure' to configure the package for your system.
+
+ Running `configure' might take a while. While running, it prints
+ some messages telling which features it is checking for.
+
+ 2. Type `make' to compile the package.
+
+ 3. Optionally, type `make check' to run any self-tests that come with
+ the package.
+
+ 4. Type `make install' to install the programs and any data files and
+ documentation.
+
+ 5. You can remove the program binaries and object files from the
+ source code directory by typing `make clean'. To also remove the
+ files that `configure' created (so you can compile the package for
+ a different kind of computer), type `make distclean'. There is
+ also a `make maintainer-clean' target, but that is intended mainly
+ for the package's developers. If you use it, you may have to get
+ all sorts of other programs in order to regenerate files that came
+ with the distribution.
+
+ 6. Often, you can also type `make uninstall' to remove the installed
+ files again.
+
+Compilers and Options
+=====================
+
+ Some systems require unusual options for compilation or linking that
+the `configure' script does not know about. Run `./configure --help'
+for details on some of the pertinent environment variables.
+
+ You can give `configure' initial values for configuration parameters
+by setting variables in the command line or in the environment. Here
+is an example:
+
+ ./configure CC=c99 CFLAGS=-g LIBS=-lposix
+
+ *Note Defining Variables::, for more details.
+
+Compiling For Multiple Architectures
+====================================
+
+ You can compile the package for more than one kind of computer at the
+same time, by placing the object files for each architecture in their
+own directory. To do this, you can use GNU `make'. `cd' to the
+directory where you want the object files and executables to go and run
+the `configure' script. `configure' automatically checks for the
+source code in the directory that `configure' is in and in `..'.
+
+ With a non-GNU `make', it is safer to compile the package for one
+architecture at a time in the source code directory. After you have
+installed the package for one architecture, use `make distclean' before
+reconfiguring for another architecture.
+
+ On MacOS X 10.5 and later systems, you can create libraries and
+executables that work on multiple system types--known as "fat" or
+"universal" binaries--by specifying multiple `-arch' options to the
+compiler but only a single `-arch' option to the preprocessor. Like
+this:
+
+ ./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
+ CXX="g++ -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
+ CPP="gcc -E" CXXCPP="g++ -E"
+
+ This is not guaranteed to produce working output in all cases, you
+may have to build one architecture at a time and combine the results
+using the `lipo' tool if you have problems.
+
+Installation Names
+==================
+
+ By default, `make install' installs the package's commands under
+`/usr/local/bin', include files under `/usr/local/include', etc. You
+can specify an installation prefix other than `/usr/local' by giving
+`configure' the option `--prefix=PREFIX'.
+
+ You can specify separate installation prefixes for
+architecture-specific files and architecture-independent files. If you
+pass the option `--exec-prefix=PREFIX' to `configure', the package uses
+PREFIX as the prefix for installing programs and libraries.
+Documentation and other data files still use the regular prefix.
+
+ In addition, if you use an unusual directory layout you can give
+options like `--bindir=DIR' to specify different values for particular
+kinds of files. Run `configure --help' for a list of the directories
+you can set and what kinds of files go in them.
+
+ If the package supports it, you can cause programs to be installed
+with an extra prefix or suffix on their names by giving `configure' the
+option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
+
+Optional Features
+=================
+
+ Some packages pay attention to `--enable-FEATURE' options to
+`configure', where FEATURE indicates an optional part of the package.
+They may also pay attention to `--with-PACKAGE' options, where PACKAGE
+is something like `gnu-as' or `x' (for the X Window System). The
+`README' should mention any `--enable-' and `--with-' options that the
+package recognizes.
+
+ For packages that use the X Window System, `configure' can usually
+find the X include and library files automatically, but if it doesn't,
+you can use the `configure' options `--x-includes=DIR' and
+`--x-libraries=DIR' to specify their locations.
+
+Particular systems
+==================
+
+ On HP-UX, the default C compiler is not ANSI C compatible. If GNU
+CC is not installed, it is recommended to use the following options in
+order to use an ANSI C compiler:
+
+ ./configure CC="cc -Ae"
+
+and if that doesn't work, install pre-built binaries of GCC for HP-UX.
+
+ On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot
+parse its `<wchar.h>' header file. The option `-nodtk' can be used as
+a workaround. If GNU CC is not installed, it is therefore recommended
+to try
+
+ ./configure CC="cc"
+
+and if that doesn't work, try
+
+ ./configure CC="cc -nodtk"
+
+Specifying the System Type
+==========================
+
+ There may be some features `configure' cannot figure out
+automatically, but needs to determine by the type of machine the package
+will run on. Usually, assuming the package is built to be run on the
+_same_ architectures, `configure' can figure that out, but if it prints
+a message saying it cannot guess the machine type, give it the
+`--build=TYPE' option. TYPE can either be a short name for the system
+type, such as `sun4', or a canonical name which has the form:
+
+ CPU-COMPANY-SYSTEM
+
+where SYSTEM can have one of these forms:
+
+ OS KERNEL-OS
+
+ See the file `config.sub' for the possible values of each field. If
+`config.sub' isn't included in this package, then this package doesn't
+need to know the machine type.
+
+ If you are _building_ compiler tools for cross-compiling, you should
+use the option `--target=TYPE' to select the type of system they will
+produce code for.
+
+ If you want to _use_ a cross compiler, that generates code for a
+platform different from the build platform, you should specify the
+"host" platform (i.e., that on which the generated programs will
+eventually be run) with `--host=TYPE'.
+
+Sharing Defaults
+================
+
+ If you want to set default values for `configure' scripts to share,
+you can create a site shell script called `config.site' that gives
+default values for variables like `CC', `cache_file', and `prefix'.
+`configure' looks for `PREFIX/share/config.site' if it exists, then
+`PREFIX/etc/config.site' if it exists. Or, you can set the
+`CONFIG_SITE' environment variable to the location of the site script.
+A warning: not all `configure' scripts look for a site script.
+
+Defining Variables
+==================
+
+ Variables not defined in a site shell script can be set in the
+environment passed to `configure'. However, some packages may run
+configure again during the build, and the customized values of these
+variables may be lost. In order to avoid this problem, you should set
+them in the `configure' command line, using `VAR=value'. For example:
+
+ ./configure CC=/usr/local2/bin/gcc
+
+causes the specified `gcc' to be used as the C compiler (unless it is
+overridden in the site shell script).
+
+Unfortunately, this technique does not work for `CONFIG_SHELL' due to
+an Autoconf bug. Until the bug is fixed you can use this workaround:
+
+ CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash
+
+`configure' Invocation
+======================
+
+ `configure' recognizes the following options to control how it
+operates.
+
+`--help'
+`-h'
+ Print a summary of all of the options to `configure', and exit.
+
+`--help=short'
+`--help=recursive'
+ Print a summary of the options unique to this package's
+ `configure', and exit. The `short' variant lists options used
+ only in the top level, while the `recursive' variant lists options
+ also present in any nested packages.
+
+`--version'
+`-V'
+ Print the version of Autoconf used to generate the `configure'
+ script, and exit.
+
+`--cache-file=FILE'
+ Enable the cache: use and save the results of the tests in FILE,
+ traditionally `config.cache'. FILE defaults to `/dev/null' to
+ disable caching.
+
+`--config-cache'
+`-C'
+ Alias for `--cache-file=config.cache'.
+
+`--quiet'
+`--silent'
+`-q'
+ Do not print messages saying which checks are being made. To
+ suppress all normal output, redirect it to `/dev/null' (any error
+ messages will still be shown).
+
+`--srcdir=DIR'
+ Look for the package's source code in directory DIR. Usually
+ `configure' can determine that directory automatically.
+
+`--prefix=DIR'
+ Use DIR as the installation prefix. *Note Installation Names::
+ for more details, including other options available for fine-tuning
+ the installation locations.
+
+`--no-create'
+`-n'
+ Run the configure checks, but stop before creating any output
+ files.
+
+`configure' also accepts some other, not widely useful, options. Run
+`configure --help' for more details.
+
--- /dev/null
+#
+# Copyright © 2003 Keith Packard, Noah Levitt
+#
+# Permission to use, copy, modify, distribute, and sell this software and its
+# documentation for any purpose is hereby granted without fee, provided that
+# the above copyright notice appear in all copies and that both that
+# copyright notice and this permission notice appear in supporting
+# documentation, and that the name of Keith Packard not be used in
+# advertising or publicity pertaining to distribution of the software without
+# specific, written prior permission. Keith Packard makes no
+# representations about the suitability of this software for any purpose. It
+# is provided "as is" without express or implied warranty.
+#
+# KEITH PACKARD DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
+# INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
+# EVENT SHALL KEITH PACKARD BE LIABLE FOR ANY SPECIAL, INDIRECT OR
+# CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
+# DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
+# TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+# PERFORMANCE OF THIS SOFTWARE.
+
+SUBDIRS = src
+
+INCLUDES = $(top_srcdir)/include/
+
+pkgconfigdir = $(libdir)/pkgconfig
+pkgconfig_DATA = xdamage.pc
+
+MAINTAINERCLEANFILES = ChangeLog INSTALL
+
+.PHONY: ChangeLog INSTALL
+
+INSTALL:
+ $(INSTALL_CMD)
+
+ChangeLog:
+ $(CHANGELOG_CMD)
+
+dist-hook: ChangeLog INSTALL
--- /dev/null
+2004-07-30: First release with xorg 6.8.0
+2007-01-08: Release of version 1.1 supporting protocol version 1.1.
\ No newline at end of file
--- /dev/null
+ Damage
+ X Damage Extension
+ Version 1.1
+ 2007-01-04
+
+This package contains the library for the X Damage extension.
+
+Keith Packard
+keithp@keithp.com
+
+All questions regarding this software should be directed at the
+Xorg mailing list:
+
+ http://lists.freedesktop.org/mailman/listinfo/xorg
+
+Please submit bug reports to the Xorg bugzilla:
+
+ https://bugs.freedesktop.org/enter_bug.cgi?product=xorg
+
+The master development code repository can be found at:
+
+ git://anongit.freedesktop.org/git/xorg/lib/libXdamage
+
+ http://cgit.freedesktop.org/xorg/lib/libXdamage
+
+For patch submission instructions, see:
+
+ http://www.x.org/wiki/Development/Documentation/SubmittingPatches
+
+For more information on the git code manager, see:
+
+ http://wiki.x.org/wiki/GitPage
+
--- /dev/null
+#! /bin/sh
+
+srcdir=`dirname $0`
+test -z "$srcdir" && srcdir=.
+
+ORIGDIR=`pwd`
+cd $srcdir
+
+autoreconf -v --install || exit 1
+cd $ORIGDIR || exit $?
+
+#$srcdir/configure --enable-maintainer-mode "$@"
--- /dev/null
+dnl
+dnl Copyright © 2003 Keith Packard, Noah Levitt
+dnl
+dnl Permission to use, copy, modify, distribute, and sell this software and its
+dnl documentation for any purpose is hereby granted without fee, provided that
+dnl the above copyright notice appear in all copies and that both that
+dnl copyright notice and this permission notice appear in supporting
+dnl documentation, and that the name of Keith Packard not be used in
+dnl advertising or publicity pertaining to distribution of the software without
+dnl specific, written prior permission. Keith Packard makes no
+dnl representations about the suitability of this software for any purpose. It
+dnl is provided "as is" without express or implied warranty.
+dnl
+dnl KEITH PACKARD DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
+dnl INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
+dnl EVENT SHALL KEITH PACKARD BE LIABLE FOR ANY SPECIAL, INDIRECT OR
+dnl CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
+dnl DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
+dnl TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+dnl PERFORMANCE OF THIS SOFTWARE.
+dnl
+dnl Process this file with autoconf to create configure.
+
+AC_PREREQ([2.60])
+
+dnl
+dnl Version should match the current XDamage version. XDamageQueryVersion
+dnl returns the version from damagewire.h, NOT the version we set here. But we
+dnl try to keep these the same. Note that the library has an extra
+dnl digit in the version number to track changes which don't affect the
+dnl protocol, so Xdamage version l.n.m corresponds to protocol version l.n
+dnl
+AC_INIT(libXdamage,
+ 1.1.3,
+ [https://bugs.freedesktop.org/enter_bug.cgi?product=xorg],
+ libXdamage)
+AM_INIT_AUTOMAKE([foreign dist-bzip2])
+AM_MAINTAINER_MODE
+
+# Require xorg-macros: XORG_DEFAULT_OPTIONS
+m4_ifndef([XORG_MACROS_VERSION],
+ [m4_fatal([must install xorg-macros 1.3 or later before running autoconf/autogen])])
+XORG_MACROS_VERSION(1.3)
+XORG_DEFAULT_OPTIONS
+AM_CONFIG_HEADER(config.h)
+
+# Check for progs
+AC_PROG_CC
+AC_PROG_LIBTOOL
+
+# Check damageext configuration, strip extra digits from package version to
+# find the required protocol version
+
+DAMAGEEXT_VERSION=[`echo $VERSION | sed 's/^\([0-9][0-9]*\.[0-9][0-9]*\).*$/\1/'`]
+AC_SUBST(DAMAGEEXT_VERSION)
+PKG_CHECK_MODULES(XDAMAGE, [damageproto >= $DAMAGEEXT_VERSION] xfixes fixesproto xextproto x11)
+AC_SUBST(XDAMAGE_CFLAGS)
+
+AC_OUTPUT([Makefile
+ src/Makefile
+ xdamage.pc])
+
--- /dev/null
+------------------------------------------------------
+Quick Guide To Patching This Package For The Impatient
+------------------------------------------------------
+
+1. Make sure you have quilt installed
+2. Unpack the package as usual with "dpkg-source -x"
+3. Run the "patch" target in debian/rules
+4. Create a new patch with "quilt new" (see quilt(1))
+5. Edit all the files you want to include in the patch with "quilt edit"
+ (see quilt(1)).
+6. Write the patch with "quilt refresh" (see quilt(1))
+7. Run the "clean" target in debian/rules
+
+Alternatively, instead of using quilt directly, you can drop the patch in to
+debian/patches and add the name of the patch to debian/patches/series.
+
+------------------------------------
+Guide To The X Strike Force Packages
+------------------------------------
+
+The X Strike Force team maintains X packages in git repositories on
+git.debian.org in the pkg-xorg subdirectory. Most upstream packages
+are actually maintained in git repositories as well, so they often
+just need to be pulled into git.debian.org in a "upstream-*" branch.
+Otherwise, the upstream sources are manually installed in the Debian
+git repository.
+
+The .orig.tar.gz upstream source file could be generated this
+"upstream-*" branch in the Debian git repository but it is actually
+copied from upstream tarballs directly.
+
+Due to X.org being highly modular, packaging all X.org applications
+as their own independent packages would have created too many Debian
+packages. For this reason, some X.org applications have been grouped
+into larger packages: xutils, xutils-dev, x11-apps, x11-session-utils,
+x11-utils, x11-xfs-utils, x11-xkb-utils, x11-xserver-utils.
+Most packages, including the X.org server itself and all libraries
+and drivers are, however maintained independently.
+
+The Debian packaging is added by creating the "debian-*" git branch
+which contains the aforementioned "upstream-*" branch plus the debian/
+repository files.
+When a patch has to be applied to the Debian package, two solutions
+are involved:
+* If the patch is available in one of the upstream branches, it
+ may be git'cherry-picked into the Debian repository. In this
+ case, it appears directly in the .diff.gz.
+* Otherwise, the patch is added to debian/patches/ which is managed
+ with quilt as documented in /usr/share/doc/quilt/README.source.
+
+quilt is actually invoked by the Debian X packaging through a larger
+set of scripts called XSFBS. XSFBS brings some other X specific
+features such as managing dependencies and conflicts due to the video
+and input driver ABIs.
+XSFBS itself is maintained in a separate repository at
+ git://git.debian.org/pkg-xorg/xsfbs.git
+and it is pulled inside the other Debian X repositories when needed.
+
+The XSFBS patching system requires a build dependency on quilt. Also
+a dependency on $(STAMP_DIR)/patch has to be added to debian/rules
+so that the XSFBS patching occurs before the actual build. So the
+very first target of the build (likely the one running autoreconf)
+should depend on $(STAMP_DIR)/patch. It should also not depend on
+anything so that parallel builds are correctly supported (nothing
+should probably run while patching is being done). And finally, the
+clean target should depend on the xsfclean target so that patches
+are unapplied on clean.
+
+When the upstream sources contain some DFSG-nonfree files, they are
+listed in text files in debian/prune/ in the "debian-*" branch of
+the Debian repository. XSFBS' scripts then take care of removing
+these listed files during the build so as to generate a modified
+DFSG-free .orig.tar.gz tarball.
--- /dev/null
+libxdamage (1:1.1.3-2slp2) unstable; urgency=low
+
+ * [X11R7.6] upgrade package
+ * Git: 65.213.180.234:slp/pkgs/xorg/lib/libxdamage
+ * Tag: libxdamage_1.1.3-2slp2
+
+ -- SooChan Lim <sc1.lim@samsung.com> Tue, 04 Jan 2011 10:54:05 +0900
+
+libxdamage (1:1.1.3-1) unstable; urgency=low
+
+ [ Julien Cristau ]
+ * Remove myself from Uploaders.
+ * Rename the build directory to not include DEB_BUILD_GNU_TYPE for no
+ good reason. Thanks, Colin Watson!
+ * New upstream release.
+ * Bump xutils-dev build-dep for newer macros.
+
+ [ Brice Goglin ]
+ * Remove Jamey Sharp and Josh Triplett from Uploaders, closes: #568279.
+
+ -- Julien Cristau <jcristau@debian.org> Fri, 18 Jun 2010 14:18:01 +0100
+
+libxdamage (1:1.1.2-1) unstable; urgency=low
+
+ [ Brice Goglin ]
+ * Add a link to www.X.org in the long description.
+ * Drop CVS header from debian/copyright.
+ * Add upstream URL to debian/copyright.
+ * Add README.source, bump Standards-Version to 3.8.2.
+ * Use updated xsfbs, closes: #538586.
+ * Move -dbg package to section debug.
+
+ [ Timo Aaltonen ]
+ * New upstream release (closes: #554235).
+ * Run autoreconf on build. Add build-deps on automake, libtool
+ and xutils-dev.
+ * Parse space-separated DEB_BUILD_OPTIONS, and handle parallel=N.
+ * Drop pre-dependency on x11-common from libxdamage-dev. This was needed
+ for upgrades from sarge.
+
+ [ Julien Cristau ]
+ * Bump Standards-Version to 3.8.3 (no changes).
+
+ -- Julien Cristau <jcristau@debian.org> Wed, 25 Nov 2009 15:43:49 +0100
+
+libxdamage (1:1.1.1-4) unstable; urgency=low
+
+ * Remove Branden from Uploaders with his permission.
+ * Drop the -1 debian revision from the libx11-dev build-dep.
+ * Bump Standards-Version to 3.7.3.
+ * Drop the XS- prefix from Vcs-* control fields.
+ * libxdamage1{,-dbg} don't need to depend on x11-common.
+ * Use ${binary:Version} instead of the deprecated ${Source-Version}.
+ * Add myself to Uploaders.
+
+ -- Julien Cristau <jcristau@debian.org> Sun, 18 May 2008 11:32:52 +0200
+
+libxdamage (1:1.1.1-3) unstable; urgency=low
+
+ * Add XS-Vcs-Browser.
+ * Remove Fabio from Uploaders, with his permission.
+ * Upload to unstable.
+ * Fix the shlibs file: it's libXdamage, not libxdamage...
+
+ -- Julien Cristau <jcristau@debian.org> Fri, 20 Apr 2007 22:37:32 +0200
+
+libxdamage (1:1.1.1-2) experimental; urgency=low
+
+ * Bump shlibs to libxdamage >= 1:1.1.
+
+ -- Julien Cristau <jcristau@debian.org> Wed, 21 Mar 2007 12:50:56 +0100
+
+libxdamage (1:1.1.1-1) experimental; urgency=low
+
+ [ Julien Cristau ]
+ * Adjust Section values to what the override says.
+ * Update location of upstream repository from CVS to git in the long
+ descriptions.
+ * New upstream release.
+ + Drop patch applied upstream.
+ + Bump (build-)dependency on x11proto-damage-dev to >= 1.1.
+ * Install upstream changelog.
+ * Add XS-Vcs-Git header in debian/control.
+
+ [ Drew Parsons ]
+ * New upstream release 1.1.1.
+
+ -- Drew Parsons <dparsons@debian.org> Wed, 21 Mar 2007 21:11:50 +1100
+
+libxdamage (1:1.0.3-3) unstable; urgency=low
+
+ * calls UnlockDisplay and SyncHandle when it shouldn't (Closes:
+ #400445)
+ * Add Josh and myself to Uploaders.
+ * Enable xsfbs patch application.
+ * Add quilt to Build-Depends.
+
+ -- Jamey Sharp <sharpone@debian.org> Mon, 27 Nov 2006 16:07:41 -0800
+
+libxdamage (1:1.0.3-2) unstable; urgency=low
+
+ * Bring X11R7.1 into unstable.
+ * dbg package has priority extra.
+ * exclude libXdamage.la from dh_install
+
+ -- Drew Parsons <dparsons@debian.org> Sat, 26 Aug 2006 19:02:10 +1000
+
+libxdamage (1:1.0.3-1) experimental; urgency=low
+
+ * New upstream version for X11R7.1.
+
+ -- Drew Parsons <dparsons@debian.org> Sat, 5 Aug 2006 23:47:28 +1000
+
+libxdamage (1:1.0.2.2-4) UNRELEASED; urgency=low
+
+ * Test for obj-$(DEB_BUILD_GNU_TYPE) before creating it during build;
+ idempotency fix.
+ * Run dh_install w/ --list-missing.
+ * Drop duplicate x11-common dep in -dev package.
+ * Bump standards version to 3.7.2.0.
+ * Version x11-common pre-dep in -dev package to 1:7.0.0 to match
+ the rest of Debian.
+ * Bump debhelper compat to 5.
+ * Fix dh_strip call to skip the -dbg package.
+
+ -- Andres Salomon <dilinger@debian.org> Mon, 17 Jul 2006 01:20:50 -0400
+
+libxdamage (1:1.0.2.2-3) unstable; urgency=low
+
+ * Reorder makeshlib command in rules file so that ldconfig is run
+ properly. Thanks Drew Parsons and Steve Langasek.
+
+ -- David Nusinow <dnusinow@debian.org> Tue, 18 Apr 2006 21:49:57 -0400
+
+libxdamage (1:1.0.2.2-2) unstable; urgency=low
+
+ * Upload to unstable
+
+ -- David Nusinow <dnusinow@debian.org> Thu, 23 Mar 2006 22:44:33 -0500
+
+libxdamage (1:1.0.2.2-1) experimental; urgency=low
+
+ * First upload to Debian
+
+ -- David Nusinow <dnusinow@debian.org> Thu, 29 Dec 2005 20:51:33 -0500
+
+libxdamage (1:1.0.1-3) breezy; urgency=low
+
+ * Bump Build-Depends on libx11-dev and libxfixes-dev high enough to avoid
+ the unfortunate _XOPEN_SOURCE braindamage -- er, I mean love.
+
+ -- Daniel Stone <daniel.stone@ubuntu.com> Fri, 22 Jul 2005 23:43:05 +1000
+
+libxdamage (1:1.0.1-2) breezy; urgency=low
+
+ * Fix src/Makefile.am to have the right soversion and reupload. THANKYOU
+ LIBTOOL. YOU MAKE WAKING UP IN THE MORNINGS WORTHWHILE.
+
+ -- Daniel Stone <daniel.stone@ubuntu.com> Tue, 19 Jul 2005 10:12:05 +1000
+
+libxdamage (1:1.0.1-1) breezy; urgency=low
+
+ * First libxdamage release.
+
+ -- Daniel Stone <daniel.stone@ubuntu.com> Mon, 16 May 2005 22:10:17 +1000
--- /dev/null
+Source: libxdamage
+Section: x11
+Priority: optional
+Maintainer: SooChan Lim <sc.lim@samsung.com>, Sangjin Lee <lsj119@samsung.com>, Debian X Strike Force <debian-x@lists.debian.org>
+Uploaders: SooChan Lim <sc1.lim@samsung.com>, David Nusinow <dnusinow@debian.org>, Drew Parsons <dparsons@debian.org>
+Build-Depends: debhelper (>= 5.0.0), libx11-dev (>= 1:0.99.2), libxfixes-dev (>= 1:3.0.0-4), x11proto-damage-dev (>= 1.1), pkg-config, quilt, automake, libtool, xutils-dev (>= 1:7.5-1slp2+1),
+Standards-Version: 3.8.3
+Vcs-Git: git://git.debian.org/git/pkg-xorg/lib/libxdamage
+Vcs-Browser: http://git.debian.org/?p=pkg-xorg/lib/libxdamage.git
+
+Package: libxdamage1
+Section: libs
+Architecture: any
+Depends: ${shlibs:Depends}, ${misc:Depends}, x11-common
+Description: X11 damaged region extension library
+ libXdamage provides an X Window System client interface to the DAMAGE
+ extension to the X protocol.
+ .
+ The Damage extension provides for notification of when on-screen regions have
+ been 'damaged' (altered).
+ .
+ More information about X.Org can be found at:
+ <URL:http://www.X.org>
+ .
+ This module can be found at
+ git://anongit.freedesktop.org/git/xorg/lib/libXdamage
+
+Package: libxdamage1-dbg
+Section: debug
+Architecture: any
+Priority: extra
+Depends: ${shlibs:Depends}, ${misc:Depends}, libxdamage1 (= ${binary:Version})
+Description: X11 damaged region extension library (debug package)
+ libXdamage provides an X Window System client interface to the DAMAGE
+ extension to the X protocol.
+ .
+ The Damage extension provides for notification of when on-screen regions have
+ been 'damaged' (altered).
+ .
+ This package contains the debug versions of the library found in libxdamage1.
+ Non-developers likely have little use for this package.
+ .
+ More information about X.Org can be found at:
+ <URL:http://www.X.org>
+ .
+ This module can be found at
+ git://anongit.freedesktop.org/git/xorg/lib/libXdamage
+
+Package: libxdamage-dev
+Section: libdevel
+Architecture: any
+Depends: ${shlibs:Depends}, ${misc:Depends}, libxdamage1 (= ${binary:Version}), libx11-dev, libxfixes-dev, x11proto-damage-dev (>= 1.1)
+Description: X11 damaged region extension library (development headers)
+ libXdamage provides an X Window System client interface to the DAMAGE
+ extension to the X protocol.
+ .
+ The Damage extension provides for notification of when on-screen regions have
+ been 'damaged' (altered).
+ .
+ This package contains the development headers for the library found in
+ libxdamage1. Non-developers likely have little use for this package.
+ .
+ More information about X.Org can be found at:
+ <URL:http://www.X.org>
+ .
+ This module can be found at
+ git://anongit.freedesktop.org/git/xorg/lib/libXdamage
--- /dev/null
+This package was downloaded from
+http://xorg.freedesktop.org/releases/individual/lib/
+
+Copyright © 2001,2003 Keith Packard
+Copyright © 2007 Eric Anholt
+
+Permission to use, copy, modify, distribute, and sell this software and its
+documentation for any purpose is hereby granted without fee, provided that
+the above copyright notice appear in all copies and that both that
+copyright notice and this permission notice appear in supporting
+documentation, and that the name of Keith Packard not be used in
+advertising or publicity pertaining to distribution of the software without
+specific, written prior permission. Keith Packard makes no
+representations about the suitability of this software for any purpose. It
+is provided "as is" without express or implied warranty.
+
+KEITH PACKARD DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
+INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
+EVENT SHALL KEITH PACKARD BE LIABLE FOR ANY SPECIAL, INDIRECT OR
+CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
+DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
+TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+PERFORMANCE OF THIS SOFTWARE.
+
--- /dev/null
+[DEFAULT]
+pristine-tar = True
+debian-branch = debian-unstable
+upstream-branch = upstream-unstable
--- /dev/null
+usr/include/X11/*
+usr/lib/libXdamage.{a,la}
+usr/lib/libXdamage.so
+usr/lib/pkgconfig/xdamage.pc
--- /dev/null
+usr/lib/libXdamage.so.1*
--- /dev/null
+libXdamage 1 libxdamage1 (>= 1:1.1)
--- /dev/null
+#!/usr/bin/make -f
+# debian/rules for the Debian libxdamage package.
+# Copyright © 2004 Scott James Remnant <scott@netsplit.com>
+# Copyright © 2005 Daniel Stone <daniel@fooishbar.org>
+# Copyright © 2005 David Nusinow <dnusinow@debian.org>
+
+# Uncomment this to turn on verbose mode.
+#export DH_VERBOSE=1
+
+# set this to the name of the main shlib's binary package
+PACKAGE = libxdamage1
+
+include debian/xsfbs/xsfbs.mk
+
+CFLAGS = -Wall -g
+LDFLAGS += -Wl,--hash-style=both -Wl,--as-needed
+ifneq (,$(filter noopt,$(DEB_BUILD_OPTIONS)))
+ CFLAGS += -O0
+else
+ CFLAGS += -O2
+endif
+ifneq (,$(filter parallel=%,$(DEB_BUILD_OPTIONS)))
+ NUMJOBS = $(patsubst parallel=%,%,$(filter parallel=%,$(DEB_BUILD_OPTIONS)))
+ MAKEFLAGS += -j$(NUMJOBS)
+endif
+
+DEB_HOST_ARCH ?= $(shell dpkg-architecture -qDEB_HOST_ARCH)
+DEB_HOST_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_HOST_GNU_TYPE)
+DEB_BUILD_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_BUILD_GNU_TYPE)
+ifeq ($(DEB_BUILD_GNU_TYPE), $(DEB_HOST_GNU_TYPE))
+ confflags += --build=$(DEB_HOST_GNU_TYPE)
+else
+ confflags += --build=$(DEB_BUILD_GNU_TYPE) --host=$(DEB_HOST_GNU_TYPE)
+endif
+
+autogen:
+ dh_testdir
+
+ ./autogen.sh
+
+#build: patch build-stamp
+build: autogen build-stamp
+build-stamp:
+ dh_testdir
+ test -d obj-$(DEB_BUILD_GNU_TYPE) || mkdir obj-$(DEB_BUILD_GNU_TYPE)
+ cd obj-$(DEB_BUILD_GNU_TYPE) && \
+ ../configure --prefix=/usr CFLAGS="$(CFLAGS)" LDFLAGS="$(LDFLAGS)"
+ cd obj-$(DEB_BUILD_GNU_TYPE) && $(MAKE)
+
+ touch build-stamp
+
+clean: xsfclean
+ dh_testdir
+ dh_testroot
+ rm -f build-stamp
+
+ rm -f config.cache config.log config.status
+ rm -f */config.cache */config.log */config.status
+ rm -f conftest* */conftest*
+ rm -rf autom4te.cache */autom4te.cache
+ rm -rf obj-*
+ rm -f aclocal.m4 config.guess config.h.in config.sub configure
+ rm -f depcomp install-sh missing mkinstalldirs ltmain.sh
+ #rm -f ltmain.sh
+ find -name Makefile.in -exec rm -f {} \;
+ #find -name Makefile.in -delete
+
+ dh_clean
+
+install: build
+ dh_testdir
+ dh_testroot
+ dh_clean -k
+ dh_installdirs
+
+ cd obj-$(DEB_BUILD_GNU_TYPE) && $(MAKE) DESTDIR=$(CURDIR)/debian/tmp install
+
+# Build architecture-dependent files here.
+binary-arch: build install
+ dh_testdir
+ dh_testroot
+
+# dh_installdocs
+ dh_install --sourcedir=debian/tmp --list-missing --exclude=usr/share/man/man3
+# dh_installman
+# dh_installchangelogs
+ dh_link
+ dh_strip --dbg-package=$(PACKAGE)-dbg
+ dh_compress
+ dh_fixperms
+ dh_makeshlibs
+ dh_shlibdeps
+ dh_installdeb
+ dh_gencontrol
+ dh_md5sums
+ dh_builddeb
+
+# Build architecture-independent files here.
+binary-indep: build install
+# Nothing to do
+
+binary: binary-indep binary-arch
+.PHONY: build clean binary-indep binary-arch binary install
--- /dev/null
+version=3
+http://xorg.freedesktop.org/releases/individual/lib/ libXdamage-(.*)\.tar\.gz
--- /dev/null
+#!/bin/sh
+
+set -e
+
+if ! [ -d debian/prune ]; then
+ exit 0
+fi
+
+if [ "x$1" != x--upstream-version ]; then
+ exit 1
+fi
+
+version="$2"
+filename="$3"
+
+if [ -z "$version" ] || ! [ -f "$filename" ]; then
+ exit 1
+fi
+
+dir="$(pwd)"
+tempdir="$(mktemp -d)"
+
+cd "$tempdir"
+tar xf "$dir/$filename"
+cat "$dir"/debian/prune/* | while read file; do rm -f */$file; done
+
+tar czf "$dir/$filename" *
+cd "$dir"
+rm -rf "$tempdir"
+echo "Done pruning upstream tarball"
+
+exit 0
--- /dev/null
+#!/usr/bin/make -f
+
+# Debian X Strike Force Build System (XSFBS): Make portion
+
+# Copyright 1996 Stephen Early
+# Copyright 1997 Mark Eichin
+# Copyright 1998-2005, 2007 Branden Robinson
+# Copyright 2005 David Nusinow
+#
+# Licensed under the GNU General Public License, version 2. See the file
+# /usr/share/common-licenses/GPL or <http://www.gnu.org/copyleft/gpl.txt>.
+
+# Originally by Stephen Early <sde1000@debian.org>
+# Modified by Mark W. Eichin <eichin@kitten.gen.ma.us>
+# Modified by Adam Heath <doogie@debian.org>
+# Modified by Branden Robinson <branden@debian.org>
+# Modified by Fabio Massimo Di Nitto <fabbione@fabbione.net>
+# Modified by David Nusinow <dnusinow@debian.org>
+# Acknowledgements to Manoj Srivastava.
+
+# Pass $(DH_OPTIONS) into the environment for debhelper's benefit.
+export DH_OPTIONS
+
+# force quilt to not use ~/.quiltrc and to use debian/patches
+QUILT = QUILT_PATCHES=debian/patches quilt --quiltrc /dev/null
+
+# Set up parameters for the upstream build environment.
+
+# Determine (source) package name from Debian changelog.
+SOURCE_NAME:=$(shell dpkg-parsechangelog -ldebian/changelog \
+ | grep '^Source:' | awk '{print $$2}')
+
+# Determine package version from Debian changelog.
+SOURCE_VERSION:=$(shell dpkg-parsechangelog -ldebian/changelog \
+ | grep '^Version:' | awk '{print $$2}')
+
+# Determine upstream version number.
+UPSTREAM_VERSION:=$(shell echo $(SOURCE_VERSION) | sed 's/-.*//')
+
+# Determine the source version without the epoch for make-orig-tar-gz
+NO_EPOCH_VER:=$(shell echo $(UPSTREAM_VERSION) | sed 's/^.://')
+
+# Figure out who's building this package.
+BUILDER:=$(shell echo $${DEBEMAIL:-$${EMAIL:-$$(echo $$LOGNAME@$$(cat /etc/mailname 2>/dev/null))}})
+
+# Find out if this is an official build; an official build has nothing but
+# digits, dots, and/or the codename of a release in the Debian part of the
+# version number. Anything else indicates an unofficial build.
+OFFICIAL_BUILD:=$(shell VERSION=$(SOURCE_VERSION); if ! expr "$$(echo $${VERSION\#\#*-} | sed 's/\(woody\|sarge\|etch\|lenny\)//g')" : ".*[^0-9.].*" >/dev/null 2>&1; then echo yes; fi)
+
+# Set up parameters for the Debian build environment.
+
+# Determine our architecture.
+BUILD_ARCH:=$(shell dpkg-architecture -qDEB_BUILD_ARCH)
+# Work around some old-time dpkg braindamage.
+BUILD_ARCH:=$(subst i486,i386,$(BUILD_ARCH))
+# The DEB_HOST_ARCH variable may be set per the Debian cross-compilation policy.
+ifdef DEB_HOST_ARCH
+ ARCH:=$(DEB_HOST_ARCH)
+else
+ # dpkg-cross sets the ARCH environment variable; if set, use it.
+ ifdef ARCH
+ ARCH:=$(ARCH)
+ else
+ ARCH:=$(BUILD_ARCH)
+ endif
+endif
+
+# $(STAMP_DIR) houses stamp files for complex targets.
+STAMP_DIR:=stampdir
+
+# $(DEBTREEDIR) is where all install rules are told (via $(DESTDIR)) to place
+# their files.
+DEBTREEDIR:=$(CURDIR)/debian/tmp
+
+# All "important" targets have four lines:
+# 1) A target name that is invoked by a package-building tool or the user.
+# This consists of a dependency on a "$(STAMP_DIR)/"-prefixed counterpart.
+# 2) A line delcaring 1) as a phony target (".PHONY:").
+# 3) A "$(STAMP_DIR)/"-prefixed target which does the actual work, and may
+# depend on other targets.
+# 4) A line declaring 3) as a member of the $(stampdir_targets) variable; the
+# "$(STAMP_DIR)/" prefix is omitted.
+#
+# This indirection is needed so that the "stamp" files that signify when a rule
+# is done can be located in a separate "stampdir". Recall that make has no way
+# to know when a goal has been met for a phony target (like "build" or
+# "install").
+#
+# At the end of each "$(STAMP_DIR)/" target, be sure to run the command ">$@"
+# so that the target will not be run again. Removing the file will make Make
+# run the target over.
+
+# All phony targets should be declared as dependencies of .PHONY, even if they
+# do not have "($STAMP_DIR)/"-prefixed counterparts.
+
+# Define a harmless default rule to keep things from going nuts by accident.
+.PHONY: default
+default:
+
+# Set up the $(STAMP_DIR) directory.
+.PHONY: stampdir
+stampdir_targets+=stampdir
+stampdir: $(STAMP_DIR)/stampdir
+$(STAMP_DIR)/stampdir:
+ mkdir $(STAMP_DIR)
+ >$@
+
+# Set up the package build directory as quilt expects to find it.
+.PHONY: prepare
+stampdir_targets+=prepare
+prepare: $(STAMP_DIR)/prepare
+$(STAMP_DIR)/prepare: $(STAMP_DIR)/log $(STAMP_DIR)/genscripts
+ >$@
+
+.PHONY: log
+stampdir_targets+=log
+log: $(STAMP_DIR)/log
+$(STAMP_DIR)/log: $(STAMP_DIR)/stampdir
+ mkdir -p $(STAMP_DIR)/log
+
+# Apply all patches to the upstream source.
+.PHONY: patch
+stampdir_targets+=patch
+patch: $(STAMP_DIR)/patch
+$(STAMP_DIR)/patch: $(STAMP_DIR)/prepare
+ if ! [ `which quilt` ]; then \
+ echo "Couldn't find quilt. Please install it or add it to the build-depends for this package."; \
+ exit 1; \
+ fi; \
+ if $(QUILT) next >/dev/null 2>&1; then \
+ echo -n "Applying patches..."; \
+ if $(QUILT) push -a -v >$(STAMP_DIR)/log/patch 2>&1; then \
+ cat $(STAMP_DIR)/log/patch; \
+ echo "successful."; \
+ else \
+ cat $(STAMP_DIR)/log/patch; \
+ echo "failed! (check $(STAMP_DIR)/log/patch for details)"; \
+ exit 1; \
+ fi; \
+ else \
+ echo "No patches to apply"; \
+ fi; \
+ >$@
+
+# Revert all patches to the upstream source.
+.PHONY: unpatch
+unpatch: $(STAMP_DIR)/log
+ rm -f $(STAMP_DIR)/patch
+ @echo -n "Unapplying patches..."; \
+ if $(QUILT) applied >/dev/null 2>/dev/null; then \
+ if $(QUILT) pop -a -v >$(STAMP_DIR)/log/unpatch 2>&1; then \
+ cat $(STAMP_DIR)/log/unpatch; \
+ echo "successful."; \
+ else \
+ cat $(STAMP_DIR)/log/unpatch; \
+ echo "failed! (check $(STAMP_DIR)/log/unpatch for details)"; \
+ exit 1; \
+ fi; \
+ else \
+ echo "nothing to do."; \
+ fi
+
+# Clean the generated maintainer scripts.
+.PHONY: cleanscripts
+cleanscripts:
+ rm -f $(STAMP_DIR)/genscripts
+ rm -f debian/*.config \
+ debian/*.postinst \
+ debian/*.postrm \
+ debian/*.preinst \
+ debian/*.prerm
+
+# Clean the package build tree.
+.PHONY: xsfclean
+xsfclean: cleanscripts unpatch
+ dh_testdir
+ rm -rf .pc
+ rm -rf $(STAMP_DIR)
+ dh_clean
+
+# Remove files from the upstream source tree that we don't need, or which have
+# licensing problems. It must be run before creating the .orig.tar.gz.
+#
+# Note: This rule is for Debian package maintainers' convenience, and is not
+# needed for conventional build scenarios.
+.PHONY: prune-upstream-tree
+prune-upstream-tree:
+ # Ensure we're in the correct directory.
+ dh_testdir
+ grep -rvh '^#' debian/prune/ | xargs --no-run-if-empty rm -rf
+
+# Verify that there are no offsets or fuzz in the patches we apply.
+#
+# Note: This rule is for Debian package maintainers' convenience, and is not
+# needed for conventional build scenarios.
+.PHONY: patch-audit
+patch-audit: prepare unpatch
+ @echo -n "Auditing patches..."; \
+ >$(STAMP_DIR)/log/patch; \
+ FUZZY=; \
+ while [ -n "$$($(QUILT) next)" ]; do \
+ RESULT=$$($(QUILT) push -v | tee -a $(STAMP_DIR)/log/patch | grep ^Hunk | sed 's/^Hunk.*\(succeeded\|FAILED\).*/\1/');\
+ case "$$RESULT" in \
+ succeeded) \
+ echo "fuzzy patch: $$($(QUILT) top)" \
+ | tee -a $(STAMP_DIR)/log/$$($(QUILT) top); \
+ FUZZY=yes; \
+ ;; \
+ FAILED) \
+ echo "broken patch: $$($(QUILT) next)" \
+ | tee -a $(STAMP_DIR)/log/$$($(QUILT) next); \
+ exit 1; \
+ ;; \
+ esac; \
+ done; \
+ if [ -n "$$FUZZY" ]; then \
+ echo "there were fuzzy patches; please fix."; \
+ exit 1; \
+ else \
+ echo "done."; \
+ fi
+
+# Generate the maintainer scripts.
+.PHONY: genscripts
+stampdir_targets+=genscripts
+genscripts: $(STAMP_DIR)/genscripts
+$(STAMP_DIR)/genscripts: $(STAMP_DIR)/stampdir
+ for FILE in debian/*.config.in \
+ debian/*.postinst.in \
+ debian/*.postrm.in \
+ debian/*.preinst.in \
+ debian/*.prerm.in; do \
+ if [ -e "$$FILE" ]; then \
+ MAINTSCRIPT=$$(echo $$FILE | sed 's/.in$$//'); \
+ sed -n '1,/^#INCLUDE_SHELL_LIB#$$/p' <$$FILE \
+ | sed -e '/^#INCLUDE_SHELL_LIB#$$/d' >$$MAINTSCRIPT.tmp; \
+ cat debian/xsfbs/xsfbs.sh >>$$MAINTSCRIPT.tmp; \
+ sed -n '/^#INCLUDE_SHELL_LIB#$$/,$$p' <$$FILE \
+ | sed -e '/^#INCLUDE_SHELL_LIB#$$/d' >>$$MAINTSCRIPT.tmp; \
+ sed -e 's/@SOURCE_VERSION@/$(SOURCE_VERSION)/' \
+ -e 's/@OFFICIAL_BUILD@/$(OFFICIAL_BUILD)/' \
+ <$$MAINTSCRIPT.tmp >$$MAINTSCRIPT; \
+ rm $$MAINTSCRIPT.tmp; \
+ fi; \
+ done
+ # Validate syntax of generated shell scripts.
+ #sh debian/scripts/validate-posix-sh debian/*.config \
+ # debian/*.postinst \
+ # debian/*.postrm \
+ # debian/*.preinst \
+ # debian/*.prerm
+ >$@
+
+SERVERMINVERS = $(shell cat /usr/share/xserver-xorg/serverminver 2>/dev/null)
+VIDEOABI = $(shell cat /usr/share/xserver-xorg/videoabiver 2>/dev/null)
+INPUTABI = $(shell cat /usr/share/xserver-xorg/inputabiver 2>/dev/null)
+SERVER_DEPENDS = xserver-xorg-core (>= $(SERVERMINVERS))
+VIDDRIVER_PROVIDES = xserver-xorg-video-$(VIDEOABI)
+INPDRIVER_PROVIDES = xserver-xorg-input-$(INPUTABI)
+ifeq ($(PACKAGE),)
+PACKAGE=$(shell awk '/^Package:/ { print $$2; exit }' < debian/control)
+endif
+
+.PHONY: serverabi
+serverabi: install
+ifeq ($(SERVERMINVERS),)
+ @echo error: xserver-xorg-dev needs to be installed
+ @exit 1
+else
+ echo "xserver:Depends=$(SERVER_DEPENDS)" >> debian/$(PACKAGE).substvars
+ echo "xviddriver:Provides=$(VIDDRIVER_PROVIDES)" >> debian/$(PACKAGE).substvars
+ echo "xinpdriver:Provides=$(INPDRIVER_PROVIDES)" >> debian/$(PACKAGE).substvars
+endif
+
+# vim:set noet ai sts=8 sw=8 tw=0:
--- /dev/null
+# This is the X Strike Force shell library for X Window System package
+# maintainer scripts. It serves to define shell functions commonly used by
+# such packages, and performs some error checking necessary for proper operation
+# of those functions. By itself, it does not "do" much; the maintainer scripts
+# invoke the functions defined here to accomplish package installation and
+# removal tasks.
+
+# If you are reading this within a Debian package maintainer script (e.g.,
+# /var/lib/dpkg/info/PACKAGE.{config,preinst,postinst,prerm,postrm}), you can
+# skip past this library by scanning forward in this file to the string
+# "GOBSTOPPER".
+
+SOURCE_VERSION=@SOURCE_VERSION@
+OFFICIAL_BUILD=@OFFICIAL_BUILD@
+
+# Use special abnormal exit codes so that problems with this library are more
+# easily tracked down.
+SHELL_LIB_INTERNAL_ERROR=86
+SHELL_LIB_THROWN_ERROR=74
+SHELL_LIB_USAGE_ERROR=99
+
+# old -> new variable names
+if [ -z "$DEBUG_XORG_PACKAGE" ] && [ -n "$DEBUG_XFREE86_PACKAGE" ]; then
+ DEBUG_XORG_PACKAGE="$DEBUG_XFREE86_PACKAGE"
+fi
+if [ -z "$DEBUG_XORG_DEBCONF" ] && [ -n "$DEBUG_XFREE86_DEBCONF" ]; then
+ DEBUG_XORG_DEBCONF="$DEBUG_XFREE86_DEBCONF"
+fi
+
+# initial sanity checks
+if [ -z "$THIS_PACKAGE" ]; then
+ cat >&2 <<EOF
+Error: package maintainer script attempted to use shell library without
+definining \$THIS_PACKAGE shell variable. Please report the package name,
+version, and the text of this error message to the Debian Bug Tracking System.
+Visit <http://www.debian.org/Bugs/Reporting> on the World Wide Web for
+instructions, read the file /usr/share/doc/debian/bug-reporting.txt from the
+"doc-debian" package, or install the "reportbug" package and use the command of
+the same name to file a report against version $SOURCE_VERSION of this package.
+EOF
+ exit $SHELL_LIB_USAGE_ERROR
+fi
+
+if [ -z "$THIS_SCRIPT" ]; then
+ cat >&2 <<EOF
+Error: package maintainer script attempted to use shell library without
+definining \$THIS_SCRIPT shell variable. Please report the package name,
+version, and the text of this error message to the Debian Bug Tracking System.
+Visit <http://www.debian.org/Bugs/Reporting> on the World Wide Web for
+instructions, read the file /usr/share/doc/debian/bug-reporting.txt from the
+"doc-debian" package, or install the "reportbug" package and use the command of
+the same name to file a report against version $SOURCE_VERSION of the
+"$THIS_PACKAGE" package.
+EOF
+ exit $SHELL_LIB_USAGE_ERROR
+fi
+
+if [ "$1" = "reconfigure" ] || [ -n "$DEBCONF_RECONFIGURE" ]; then
+ RECONFIGURE="true"
+else
+ RECONFIGURE=
+fi
+
+if ([ "$1" = "install" ] || [ "$1" = "configure" ]) && [ -z "$2" ]; then
+ FIRSTINST="yes"
+fi
+
+if [ -z "$RECONFIGURE" ] && [ -z "$FIRSTINST" ]; then
+ UPGRADE="yes"
+fi
+
+trap "message;\
+ message \"Received signal. Aborting $THIS_PACKAGE package $THIS_SCRIPT script.\";\
+ message;\
+ exit 1" HUP INT QUIT TERM
+
+reject_nondigits () {
+ # syntax: reject_nondigits [ operand ... ]
+ #
+ # scan operands (typically shell variables whose values cannot be trusted) for
+ # characters other than decimal digits and barf if any are found
+ while [ -n "$1" ]; do
+ # does the operand contain anything but digits?
+ if ! expr "$1" : "[[:digit:]]\+$" > /dev/null 2>&1; then
+ # can't use die(), because it wraps message() which wraps this function
+ echo "$THIS_PACKAGE $THIS_SCRIPT error: reject_nondigits() encountered" \
+ "possibly malicious garbage \"$1\"" >&2
+ exit $SHELL_LIB_THROWN_ERROR
+ fi
+ shift
+ done
+}
+
+reject_unlikely_path_chars () {
+ # syntax: reject_unlikely_path_chars [ operand ... ]
+ #
+ # scan operands (typically shell variables whose values cannot be trusted) for
+ # characters unlikely to be seen in a path and which the shell might
+ # interpret and barf if any are found
+ while [ -n "$1" ]; do
+ # does the operand contain any funny characters?
+ if expr "$1" : '.*[!$&()*;<>?|].*' > /dev/null 2>&1; then
+ # can't use die(), because I want to avoid forward references
+ echo "$THIS_PACKAGE $THIS_SCRIPT error: reject_unlikely_path_chars()" \
+ "encountered possibly malicious garbage \"$1\"" >&2
+ exit $SHELL_LIB_THROWN_ERROR
+ fi
+ shift
+ done
+}
+
+# Query the terminal to establish a default number of columns to use for
+# displaying messages to the user. This is used only as a fallback in the
+# event the COLUMNS variable is not set. ($COLUMNS can react to SIGWINCH while
+# the script is running, and this cannot, only being calculated once.)
+DEFCOLUMNS=$(stty size 2> /dev/null | awk '{print $2}') || true
+if ! expr "$DEFCOLUMNS" : "[[:digit:]]\+$" > /dev/null 2>&1; then
+ DEFCOLUMNS=80
+fi
+
+message () {
+ # pretty-print messages of arbitrary length
+ reject_nondigits "$COLUMNS"
+ echo "$*" | fmt -t -w ${COLUMNS:-$DEFCOLUMNS} >&2
+}
+
+observe () {
+ # syntax: observe message ...
+ #
+ # issue observational message suitable for logging someday when support for
+ # it exists in dpkg
+ if [ -n "$DEBUG_XORG_PACKAGE" ]; then
+ message "$THIS_PACKAGE $THIS_SCRIPT note: $*"
+ fi
+}
+
+warn () {
+ # syntax: warn message ...
+ #
+ # issue warning message suitable for logging someday when support for
+ # it exists in dpkg; also send to standard error
+ message "$THIS_PACKAGE $THIS_SCRIPT warning: $*"
+}
+
+die () {
+ # syntax: die message ...
+ #
+ # exit script with error message
+ message "$THIS_PACKAGE $THIS_SCRIPT error: $*"
+ exit $SHELL_LIB_THROWN_ERROR
+}
+
+internal_error () {
+ # exit script with error; essentially a "THIS SHOULD NEVER HAPPEN" message
+ message "internal error: $*"
+ if [ -n "$OFFICIAL_BUILD" ]; then
+ message "Please report a bug in the $THIS_SCRIPT script of the" \
+ "$THIS_PACKAGE package, version $SOURCE_VERSION to the Debian Bug" \
+ "Tracking System. Include all messages above that mention the" \
+ "$THIS_PACKAGE package. Visit " \
+ "<http://www.debian.org/Bugs/Reporting> on the World Wide Web for" \
+ "instructions, read the file" \
+ "/usr/share/doc/debian/bug-reporting.txt from the doc-debian" \
+ "package, or install the reportbug package and use the command of" \
+ "the same name to file a report."
+ fi
+ exit $SHELL_LIB_INTERNAL_ERROR
+}
+
+usage_error () {
+ message "usage error: $*"
+ message "Please report a bug in the $THIS_SCRIPT script of the" \
+ "$THIS_PACKAGE package, version $SOURCE_VERSION to the Debian Bug" \
+ "Tracking System. Include all messages above that mention the" \
+ "$THIS_PACKAGE package. Visit " \
+ "<http://www.debian.org/Bugs/Reporting> on the World Wide Web for" \
+ "instructions, read the file" \
+ "/usr/share/doc/debian/bug-reporting.txt from the doc-debian" \
+ "package, or install the reportbug package and use the command of" \
+ "the same name to file a report."
+ exit $SHELL_LIB_USAGE_ERROR
+}
+
+font_update () {
+ # run $UPDATECMDS in $FONTDIRS
+
+ local dir cmd shortcmd x_font_dir_prefix
+
+ x_font_dir_prefix="/usr/share/fonts/X11"
+
+ if [ -z "$UPDATECMDS" ]; then
+ usage_error "font_update() called but \$UPDATECMDS not set"
+ fi
+ if [ -z "$FONTDIRS" ]; then
+ usage_error "font_update() called but \$FONTDIRS not set"
+ fi
+
+ reject_unlikely_path_chars "$UPDATECMDS"
+ reject_unlikely_path_chars "$FONTDIRS"
+
+ for dir in $FONTDIRS; do
+ if [ -d "$x_font_dir_prefix/$dir" ]; then
+ for cmd in $UPDATECMDS; do
+ if which "$cmd" > /dev/null 2>&1; then
+ shortcmd=${cmd##*/}
+ observe "running $shortcmd in $dir font directory"
+ cmd_opts=
+ if [ "$shortcmd" = "update-fonts-alias" ]; then
+ cmd_opts=--x11r7-layout
+ fi
+ if [ "$shortcmd" = "update-fonts-dir" ]; then
+ cmd_opts=--x11r7-layout
+ fi
+ if [ "$shortcmd" = "update-fonts-scale" ]; then
+ cmd_opts=--x11r7-layout
+ fi
+ $cmd $cmd_opts $dir || warn "$cmd $cmd_opts $dir" \
+ "failed; font directory data may not" \
+ "be up to date"
+ else
+ warn "$cmd not found; not updating corresponding $dir font" \
+ "directory data"
+ fi
+ done
+ else
+ warn "$dir is not a directory; not updating font directory data"
+ fi
+ done
+}
+
+remove_conffile_prepare () {
+ # syntax: remove_conffile_prepare filename official_md5sum ...
+ #
+ # Check a conffile "filename" against a list of canonical MD5 checksums.
+ # If the file's current MD5 checksum matches one of the "official_md5sum"
+ # operands provided, then prepare the conffile for removal from the system.
+ # We defer actual deletion until the package is configured so that we can
+ # roll this operation back if package installation fails.
+ #
+ # Call this function from a preinst script in the event $1 is "upgrade" or
+ # "install" and verify $2 to ensure the package is being upgraded from a
+ # version (or installed over a version removed-but-not-purged) prior to the
+ # one in which the conffile was obsoleted.
+
+ local conffile current_checksum
+
+ # validate arguments
+ if [ $# -lt 2 ]; then
+ usage_error "remove_conffile_prepare() called with wrong number of" \
+ "arguments; expected at least 2, got $#"
+ exit $SHELL_LIB_USAGE_ERROR
+ fi
+
+ conffile="$1"
+ shift
+
+ # does the conffile even exist?
+ if [ -e "$conffile" ]; then
+ # calculate its checksum
+ current_checksum=$(md5sum < "$conffile" | sed 's/[[:space:]].*//')
+ # compare it to each supplied checksum
+ while [ -n "$1" ]; do
+ if [ "$current_checksum" = "$1" ]; then
+ # we found a match; move the confffile and stop looking
+ observe "preparing obsolete conffile $conffile for removal"
+ mv "$conffile" "$conffile.$THIS_PACKAGE-tmp"
+ break
+ fi
+ shift
+ done
+ fi
+}
+
+remove_conffile_lookup () {
+ # syntax: remove_conffile_lookup package filename
+ #
+ # Lookup the md5sum of a conffile in dpkg's database, and prepare for removal
+ # if it matches the actual file's md5sum.
+ #
+ # Call this function when you would call remove_conffile_prepare but only
+ # want to check against dpkg's status database instead of known checksums.
+
+ local package conffile old_md5sum
+
+ # validate arguments
+ if [ $# -ne 2 ]; then
+ usage_error "remove_conffile_lookup() called with wrong number of" \
+ "arguments; expected 1, got $#"
+ exit $SHELL_LIB_USAGE_ERROR
+ fi
+
+ package="$1"
+ conffile="$2"
+
+ if ! [ -e "$conffile" ]; then
+ return
+ fi
+ old_md5sum="$(dpkg-query -W -f='${Conffiles}' "$package" | \
+ awk '{ if (match($0, "^ '"$conffile"' ")) print $2}')"
+ if [ -n "$old_md5sum" ]; then
+ remove_conffile_prepare "$conffile" "$old_md5sum"
+ fi
+}
+
+remove_conffile_commit () {
+ # syntax: remove_conffile_commit filename
+ #
+ # Complete the removal of a conffile "filename" that has become obsolete.
+ #
+ # Call this function from a postinst script after having used
+ # remove_conffile_prepare() in the preinst.
+
+ local conffile
+
+ # validate arguments
+ if [ $# -ne 1 ]; then
+ usage_error "remove_conffile_commit() called with wrong number of" \
+ "arguments; expected 1, got $#"
+ exit $SHELL_LIB_USAGE_ERROR
+ fi
+
+ conffile="$1"
+
+ # if the temporary file created by remove_conffile_prepare() exists, remove it
+ if [ -e "$conffile.$THIS_PACKAGE-tmp" ]; then
+ observe "committing removal of obsolete conffile $conffile"
+ rm "$conffile.$THIS_PACKAGE-tmp"
+ fi
+}
+
+remove_conffile_rollback () {
+ # syntax: remove_conffile_rollback filename
+ #
+ # Roll back the removal of a conffile "filename".
+ #
+ # Call this function from a postrm script in the event $1 is "abort-upgrade"
+ # or "abort-install" is after having used remove_conffile_prepare() in the
+ # preinst.
+
+ local conffile
+
+ # validate arguments
+ if [ $# -ne 1 ]; then
+ usage_error "remove_conffile_rollback() called with wrong number of" \
+ "arguments; expected 1, got $#"
+ exit $SHELL_LIB_USAGE_ERROR
+ fi
+
+ conffile="$1"
+
+ # if the temporary file created by remove_conffile_prepare() exists, move it
+ # back
+ if [ -e "$conffile.$THIS_PACKAGE-tmp" ]; then
+ observe "rolling back removal of obsolete conffile $conffile"
+ mv "$conffile.$THIS_PACKAGE-tmp" "$conffile"
+ fi
+}
+
+replace_conffile_with_symlink_prepare () {
+ # syntax: replace_conffile_with_symlink_prepare oldfilename newfilename \
+ # official_md5sum ...
+ #
+ # Check a conffile "oldfilename" against a list of canonical MD5 checksums.
+ # If the file's current MD5 checksum matches one of the "official_md5sum"
+ # operands provided, then prepare the conffile for removal from the system.
+ # We defer actual deletion until the package is configured so that we can
+ # roll this operation back if package installation fails. Otherwise copy it
+ # to newfilename and let dpkg handle it through conffiles mechanism.
+ #
+ # Call this function from a preinst script in the event $1 is "upgrade" or
+ # "install" and verify $2 to ensure the package is being upgraded from a
+ # version (or installed over a version removed-but-not-purged) prior to the
+ # one in which the conffile was obsoleted.
+
+ local conffile current_checksum
+
+ # validate arguments
+ if [ $# -lt 3 ]; then
+ usage_error "replace_conffile_with_symlink_prepare() called with wrong" \
+ " number of arguments; expected at least 3, got $#"
+ exit $SHELL_LIB_USAGE_ERROR
+ fi
+
+ oldconffile="$1"
+ shift
+ newconffile="$1"
+ shift
+
+ remove_conffile_prepare "$_oldconffile" "$@"
+ # If $oldconffile still exists, then md5sums didn't match.
+ # Copy it to new one.
+ if [ -f "$oldconffile" ]; then
+ cp "$oldconffile" "$newconffile"
+ fi
+
+}
+
+replace_conffile_with_symlink_commit () {
+ # syntax: replace_conffile_with_symlink_commit oldfilename
+ #
+ # Complete the removal of a conffile "oldfilename" that has been
+ # replaced by a symlink.
+ #
+ # Call this function from a postinst script after having used
+ # replace_conffile_with_symlink_prepare() in the preinst.
+
+ local conffile
+
+ # validate arguments
+ if [ $# -ne 1 ]; then
+ usage_error "replace_conffile_with_symlink_commit() called with wrong" \
+ "number of arguments; expected 1, got $#"
+ exit $SHELL_LIB_USAGE_ERROR
+ fi
+
+ conffile="$1"
+
+ remove_conffile_commit "$conffile"
+}
+
+replace_conffile_with_symlink_rollback () {
+ # syntax: replace_conffile_with_symlink_rollback oldfilename newfilename
+ #
+ # Roll back the replacing of a conffile "oldfilename" with symlink to
+ # "newfilename".
+ #
+ # Call this function from a postrm script in the event $1 is "abort-upgrade"
+ # or "abort-install" and verify $2 to ensure the package failed to upgrade
+ # from a version (or install over a version removed-but-not-purged) prior
+ # to the one in which the conffile was obsoleted.
+ # You should have used replace_conffile_with_symlink_prepare() in the
+ # preinst.
+
+ local conffile
+
+ # validate arguments
+ if [ $# -ne 2 ]; then
+ usage_error "replace_conffile_with_symlink_rollback() called with wrong" \
+ "number of arguments; expected 2, got $#"
+ exit $SHELL_LIB_USAGE_ERROR
+ fi
+
+ oldconffile="$1"
+ newconffile="$2"
+
+ remove_conffile_rollback "$_oldconffile"
+ if [ -f "$newconffile" ]; then
+ rm "$newconffile"
+ fi
+}
+
+run () {
+ # syntax: run command [ argument ... ]
+ #
+ # Run specified command with optional arguments and report its exit status.
+ # Useful for commands whose exit status may be nonzero, but still acceptable,
+ # or commands whose failure is not fatal to us.
+ #
+ # NOTE: Do *not* use this function with db_get or db_metaget commands; in
+ # those cases the return value of the debconf command *must* be checked
+ # before the string returned by debconf is used for anything.
+
+ local retval
+
+ # validate arguments
+ if [ $# -lt 1 ]; then
+ usage_error "run() called with wrong number of arguments; expected at" \
+ "least 1, got $#"
+ exit $SHELL_LIB_USAGE_ERROR
+ fi
+
+ "$@" || retval=$?
+
+ if [ ${retval:-0} -ne 0 ]; then
+ observe "command \"$*\" exited with status $retval"
+ fi
+}
+
+make_symlink_sane () {
+ # syntax: make_symlink_sane symlink target
+ #
+ # Ensure that the symbolic link symlink exists, and points to target.
+ #
+ # If symlink does not exist, create it and point it at target.
+ #
+ # If symlink exists but is not a symbolic link, back it up.
+ #
+ # If symlink exists, is a symbolic link, but points to the wrong location, fix
+ # it.
+ #
+ # If symlink exists, is a symbolic link, and already points to target, do
+ # nothing.
+ #
+ # This function wouldn't be needed if ln had an -I, --idempotent option.
+
+ # Validate arguments.
+ if [ $# -ne 2 ]; then
+ usage_error "make_symlink_sane() called with wrong number of arguments;" \
+ "expected 2, got $#"
+ exit $SHELL_LIB_USAGE_ERROR
+ fi
+
+ # We could just use the positional parameters as-is, but that makes things
+ # harder to follow.
+ local symlink target
+
+ symlink="$1"
+ target="$2"
+
+ if [ -L "$symlink" ] && [ "$(readlink "$symlink")" = "$target" ]; then
+ observe "link from $symlink to $target already exists"
+ else
+ observe "creating symbolic link from $symlink to $target"
+ mkdir -p "${target%/*}" "${symlink%/*}"
+ ln -s -b -S ".dpkg-old" "$target" "$symlink"
+ fi
+}
+
+migrate_dir_to_symlink () {
+ # syntax: migrate_dir_to_symlink old_location new_location
+ #
+ # Per Debian Policy section 6.5.4, "A directory will never be replaced by a
+ # symbolic link to a directory or vice versa; instead, the existing state
+ # (symlink or not) will be left alone and dpkg will follow the symlink if
+ # there is one."
+ #
+ # We have to do it ourselves.
+ #
+ # This function moves the contents of old_location, a directory, into
+ # new_location, a directory, then makes old_location a symbolic link to
+ # new_location.
+ #
+ # old_location need not exist, but if it does, it must be a directory (or a
+ # symlink to a directory). If it is not, it is backed up. If new_location
+ # exists already and is not a directory, it is backed up.
+ #
+ # This function should be called from a package's preinst so that other
+ # packages unpacked after this one --- but before this package's postinst runs
+ # --- are unpacked into new_location even if their payloads contain
+ # old_location filespecs.
+
+ # Validate arguments.
+ if [ $# -ne 2 ]; then
+ usage_error "migrate_dir_to_symlink() called with wrong number of"
+ "arguments; expected 2, got $#"
+ exit $SHELL_LIB_USAGE_ERROR
+ fi
+
+ # We could just use the positional parameters as-is, but that makes things
+ # harder to follow.
+ local new old
+
+ old="$1"
+ new="$2"
+
+ # Is old location a symlink?
+ if [ -L "$old" ]; then
+ # Does it already point to new location?
+ if [ "$(readlink "$old")" = "$new" ]; then
+ # Nothing to do; migration has already been done.
+ observe "migration of $old to $new already done"
+ return 0
+ else
+ # Back it up.
+ warn "backing up symbolic link $old as $old.dpkg-old"
+ mv -b "$old" "$old.dpkg-old"
+ fi
+ fi
+
+ # Does old location exist, but is not a directory?
+ if [ -e "$old" ] && ! [ -d "$old" ]; then
+ # Back it up.
+ warn "backing up non-directory $old as $old.dpkg-old"
+ mv -b "$old" "$old.dpkg-old"
+ fi
+
+ observe "migrating $old to $new"
+
+ # Is new location a symlink?
+ if [ -L "$new" ]; then
+ # Does it point the wrong way, i.e., back to where we're migrating from?
+ if [ "$(readlink "$new")" = "$old" ]; then
+ # Get rid of it.
+ observe "removing symbolic link $new which points to $old"
+ rm "$new"
+ else
+ # Back it up.
+ warn "backing up symbolic link $new as $new.dpkg-old"
+ mv -b "$new" "$new.dpkg-old"
+ fi
+ fi
+
+ # Does new location exist, but is not a directory?
+ if [ -e "$new" ] && ! [ -d "$new" ]; then
+ warn "backing up non-directory $new as $new.dpkg-old"
+ mv -b "$new" "$new.dpkg-old"
+ fi
+
+ # Create new directory if it does not yet exist.
+ if ! [ -e "$new" ]; then
+ observe "creating $new"
+ mkdir -p "$new"
+ fi
+
+ # Copy files in old location to new location. Back up any filenames that
+ # already exist in the new location with the extension ".dpkg-old".
+ observe "copying files from $old to $new"
+ if ! (cd "$old" && cp -a -b -S ".dpkg-old" . "$new"); then
+ die "error(s) encountered while copying files from $old to $new"
+ fi
+
+ # Remove files at old location.
+ observe "removing $old"
+ rm -r "$old"
+
+ # Create symlink from old location to new location.
+ make_symlink_sane "$old" "$new"
+}
+
+# vim:set ai et sw=2 ts=2 tw=80:
+
+# GOBSTOPPER: The X Strike Force shell library ends here.
--- /dev/null
+/*
+ * Copyright © 2003 Keith Packard
+ *
+ * Permission to use, copy, modify, distribute, and sell this software and its
+ * documentation for any purpose is hereby granted without fee, provided that
+ * the above copyright notice appear in all copies and that both that
+ * copyright notice and this permission notice appear in supporting
+ * documentation, and that the name of Keith Packard not be used in
+ * advertising or publicity pertaining to distribution of the software without
+ * specific, written prior permission. Keith Packard makes no
+ * representations about the suitability of this software for any purpose. It
+ * is provided "as is" without express or implied warranty.
+ *
+ * KEITH PACKARD DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
+ * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
+ * EVENT SHALL KEITH PACKARD BE LIABLE FOR ANY SPECIAL, INDIRECT OR
+ * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
+ * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
+ * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+ * PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef _XDAMAGE_H_
+#define _XDAMAGE_H_
+
+#include <X11/extensions/damagewire.h>
+#include <X11/extensions/Xfixes.h>
+#include <X11/Xfuncproto.h>
+
+#define XDAMAGE_1_1_INTERFACE
+
+typedef XID Damage;
+
+typedef struct {
+ int type; /* event base */
+ unsigned long serial;
+ Bool send_event;
+ Display *display;
+ Drawable drawable;
+ Damage damage;
+ int level;
+ Bool more; /* more events will be delivered immediately */
+ Time timestamp;
+ XRectangle area;
+ XRectangle geometry;
+} XDamageNotifyEvent;
+
+_XFUNCPROTOBEGIN
+
+Bool XDamageQueryExtension (Display *dpy,
+ int *event_base_return,
+ int *error_base_return);
+
+Status XDamageQueryVersion (Display *dpy,
+ int *major_version_return,
+ int *minor_version_return);
+
+Damage
+XDamageCreate (Display *dpy, Drawable drawable, int level);
+
+void
+XDamageDestroy (Display *dpy, Damage damage);
+
+void
+XDamageSubtract (Display *dpy, Damage damage,
+ XserverRegion repair, XserverRegion parts);
+
+void
+XDamageAdd (Display *dpy, Drawable drawable, XserverRegion region);
+
+_XFUNCPROTOEND
+
+#endif /* _XDAMAGE_H_ */
--- /dev/null
+
+Name: libXdamage
+Summary: X.Org X11 libXdamage runtime library
+Version: 1.1.3
+Release: 0
+Group: System/Libraries
+License: MIT
+URL: http://www.x.org
+Source0: http://xorg.freedesktop.org/releases/individual/lib/%{name}-%{version}.tar.gz
+Requires(post): /sbin/ldconfig
+Requires(postun): /sbin/ldconfig
+BuildRequires: pkgconfig(x11)
+BuildRequires: pkgconfig(damageproto)
+BuildRequires: pkgconfig(xfixes)
+BuildRequires: pkgconfig(xextproto)
+BuildRequires: pkgconfig(xorg-macros)
+
+%description
+Description: %{summary}
+
+
+%package devel
+Summary: X.Org X11 libXdamage development package
+Group: System/Libraries
+Requires: %{name} = %{version}-%{release}
+
+%description devel
+Description: %{summary}
+
+
+%prep
+%setup -q -n %{name}-%{version}
+
+
+%build
+
+%reconfigure --disable-static
+# Call make instruction with smp support
+make %{?jobs:-j%jobs}
+
+%install
+rm -rf %{buildroot}
+%make_install
+
+
+%clean
+rm -rf %{buildroot}
+
+
+
+%post -p /sbin/ldconfig
+
+%postun -p /sbin/ldconfig
+
+
+
+%files
+%defattr(-,root,root,-)
+%doc COPYING
+%{_libdir}/libXdamage.so.1
+%{_libdir}/libXdamage.so.1.1.0
+
+
+%files devel
+%defattr(-,root,root,-)
+%doc AUTHORS README ChangeLog
+%dir %{_includedir}/X11
+%dir %{_includedir}/X11/extensions
+%{_includedir}/X11/extensions/Xdamage.h
+%{_libdir}/libXdamage.so
+%{_libdir}/pkgconfig/xdamage.pc
+
--- /dev/null
+lib_LTLIBRARIES = libXdamage.la
+
+libXdamage_la_SOURCES = \
+ xdamageint.h \
+ Xdamage.c
+
+libXdamage_la_LIBADD = $(XDAMAGE_LIBS)
+AM_CFLAGS = $(CWARNFLAGS) $(XDAMAGE_CFLAGS)
+
+INCLUDES = -I$(top_srcdir)/include/X11/extensions
+
+libXdamage_la_LDFLAGS = -version-number 1:1:0 -no-undefined
+
+libXdamageincludedir = $(includedir)/X11/extensions
+libXdamageinclude_HEADERS = $(top_srcdir)/include/X11/extensions/Xdamage.h
--- /dev/null
+/*
+ * Copyright © 2003 Keith Packard
+ * Copyright © 2007 Eric Anholt
+ *
+ * Permission to use, copy, modify, distribute, and sell this software and its
+ * documentation for any purpose is hereby granted without fee, provided that
+ * the above copyright notice appear in all copies and that both that
+ * copyright notice and this permission notice appear in supporting
+ * documentation, and that the name of Keith Packard not be used in
+ * advertising or publicity pertaining to distribution of the software without
+ * specific, written prior permission. Keith Packard makes no
+ * representations about the suitability of this software for any purpose. It
+ * is provided "as is" without express or implied warranty.
+ *
+ * KEITH PACKARD DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
+ * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
+ * EVENT SHALL KEITH PACKARD BE LIABLE FOR ANY SPECIAL, INDIRECT OR
+ * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
+ * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
+ * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+ * PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifdef HAVE_CONFIG_H
+#include <config.h>
+#endif
+#include "xdamageint.h"
+
+XDamageExtInfo XDamageExtensionInfo;
+
+const char XDamageExtensionName[] = DAMAGE_NAME;
+
+static int
+XDamageCloseDisplay (Display *dpy, XExtCodes *codes);
+
+static Bool
+XDamageWireToEvent(Display *dpy, XEvent *event, xEvent *wire);
+
+static Status
+XDamageEventToWire(Display *dpy, XEvent *event, xEvent *wire);
+
+/*
+ * XDamageExtAddDisplay - add a display to this extension. (Replaces
+ * XextAddDisplay)
+ */
+static XDamageExtDisplayInfo *
+XDamageExtAddDisplay (XDamageExtInfo *extinfo,
+ Display *dpy,
+ const char *ext_name)
+{
+ XDamageExtDisplayInfo *info;
+ int ev;
+
+ info = (XDamageExtDisplayInfo *) Xmalloc (sizeof (XDamageExtDisplayInfo));
+ if (!info) return NULL;
+ info->display = dpy;
+
+ info->codes = XInitExtension (dpy, ext_name);
+
+ /*
+ * if the server has the extension, then we can initialize the
+ * appropriate function vectors
+ */
+ if (info->codes) {
+ xDamageQueryVersionReply rep;
+ xDamageQueryVersionReq *req;
+ XESetCloseDisplay (dpy, info->codes->extension,
+ XDamageCloseDisplay);
+ for (ev = info->codes->first_event;
+ ev < info->codes->first_event + XDamageNumberEvents;
+ ev++)
+ {
+ XESetWireToEvent (dpy, ev, XDamageWireToEvent);
+ XESetEventToWire (dpy, ev, XDamageEventToWire);
+ }
+ /*
+ * Get the version info
+ */
+ LockDisplay (dpy);
+ GetReq (DamageQueryVersion, req);
+ req->reqType = info->codes->major_opcode;
+ req->damageReqType = X_DamageQueryVersion;
+ req->majorVersion = DAMAGE_MAJOR;
+ req->minorVersion = DAMAGE_MINOR;
+ if (!_XReply (dpy, (xReply *) &rep, 0, xTrue))
+ {
+ UnlockDisplay (dpy);
+ SyncHandle ();
+ Xfree(info);
+ return NULL;
+ }
+ info->major_version = rep.majorVersion;
+ info->minor_version = rep.minorVersion;
+ UnlockDisplay (dpy);
+ SyncHandle ();
+ } else {
+ /* The server doesn't have this extension.
+ * Use a private Xlib-internal extension to hang the close_display
+ * hook on so that the "cache" (extinfo->cur) is properly cleaned.
+ * (XBUG 7955)
+ */
+ XExtCodes *codes = XAddExtension(dpy);
+ if (!codes) {
+ XFree(info);
+ return NULL;
+ }
+ XESetCloseDisplay (dpy, codes->extension, XDamageCloseDisplay);
+ }
+
+ /*
+ * now, chain it onto the list
+ */
+ _XLockMutex(_Xglobal_lock);
+ info->next = extinfo->head;
+ extinfo->head = info;
+ extinfo->cur = info;
+ extinfo->ndisplays++;
+ _XUnlockMutex(_Xglobal_lock);
+ return info;
+}
+
+
+/*
+ * XDamageExtRemoveDisplay - remove the indicated display from the
+ * extension object. (Replaces XextRemoveDisplay.)
+ */
+static int
+XDamageExtRemoveDisplay (XDamageExtInfo *extinfo, Display *dpy)
+{
+ XDamageExtDisplayInfo *info, *prev;
+
+ /*
+ * locate this display and its back link so that it can be removed
+ */
+ _XLockMutex(_Xglobal_lock);
+ prev = NULL;
+ for (info = extinfo->head; info; info = info->next) {
+ if (info->display == dpy) break;
+ prev = info;
+ }
+ if (!info) {
+ _XUnlockMutex(_Xglobal_lock);
+ return 0; /* hmm, actually an error */
+ }
+
+ /*
+ * remove the display from the list; handles going to zero
+ */
+ if (prev)
+ prev->next = info->next;
+ else
+ extinfo->head = info->next;
+
+ extinfo->ndisplays--;
+ if (info == extinfo->cur) extinfo->cur = NULL; /* flush cache */
+ _XUnlockMutex(_Xglobal_lock);
+
+ Xfree ((char *) info);
+ return 1;
+}
+
+/*
+ * XDamageExtFindDisplay - look for a display in this extension; keeps a
+ * cache of the most-recently used for efficiency. (Replaces
+ * XextFindDisplay.)
+ */
+static XDamageExtDisplayInfo *
+XDamageExtFindDisplay (XDamageExtInfo *extinfo,
+ Display *dpy)
+{
+ XDamageExtDisplayInfo *info;
+
+ /*
+ * see if this was the most recently accessed display
+ */
+ if ((info = extinfo->cur) && info->display == dpy)
+ return info;
+
+ /*
+ * look for display in list
+ */
+ _XLockMutex(_Xglobal_lock);
+ for (info = extinfo->head; info; info = info->next) {
+ if (info->display == dpy) {
+ extinfo->cur = info; /* cache most recently used */
+ _XUnlockMutex(_Xglobal_lock);
+ return info;
+ }
+ }
+ _XUnlockMutex(_Xglobal_lock);
+
+ return NULL;
+}
+
+XDamageExtDisplayInfo *
+XDamageFindDisplay (Display *dpy)
+{
+ XDamageExtDisplayInfo *info;
+
+ info = XDamageExtFindDisplay (&XDamageExtensionInfo, dpy);
+ if (!info)
+ info = XDamageExtAddDisplay (&XDamageExtensionInfo, dpy,
+ XDamageExtensionName);
+ return info;
+}
+
+static int
+XDamageCloseDisplay (Display *dpy, XExtCodes *codes)
+{
+ return XDamageExtRemoveDisplay (&XDamageExtensionInfo, dpy);
+}
+
+static Bool
+XDamageWireToEvent(Display *dpy, XEvent *event, xEvent *wire)
+{
+ XDamageExtDisplayInfo *info = XDamageFindDisplay(dpy);
+
+ XDamageCheckExtension(dpy, info, False);
+
+ switch ((wire->u.u.type & 0x7F) - info->codes->first_event)
+ {
+ case XDamageNotify: {
+ XDamageNotifyEvent *aevent = (XDamageNotifyEvent *) event;
+ xDamageNotifyEvent *awire = (xDamageNotifyEvent *) wire;
+
+ aevent->type = awire->type & 0x7F;
+ aevent->serial = _XSetLastRequestRead(dpy,
+ (xGenericReply *) wire);
+ aevent->send_event = (awire->type & 0x80) != 0;
+ aevent->display = dpy;
+ aevent->drawable = awire->drawable;
+ aevent->damage = awire->damage;
+ aevent->level = awire->level & ~DamageNotifyMore;
+ aevent->more = (awire->level & DamageNotifyMore) ? True : False;
+ aevent->timestamp = awire->timestamp;
+ aevent->area.x = awire->area.x;
+ aevent->area.y = awire->area.y;
+ aevent->area.width = awire->area.width;
+ aevent->area.height = awire->area.height;
+ aevent->geometry.x = awire->geometry.x;
+ aevent->geometry.y = awire->geometry.y;
+ aevent->geometry.width = awire->geometry.width;
+ aevent->geometry.height = awire->geometry.height;
+ return True;
+ }
+ }
+ return False;
+}
+
+static Status
+XDamageEventToWire(Display *dpy, XEvent *event, xEvent *wire)
+{
+ XDamageExtDisplayInfo *info = XDamageFindDisplay(dpy);
+
+ XDamageCheckExtension(dpy, info, False);
+
+ switch ((event->type & 0x7F) - info->codes->first_event)
+ {
+ case XDamageNotify: {
+ XDamageNotifyEvent *aevent;
+ xDamageNotifyEvent *awire;
+ awire = (xDamageNotifyEvent *) wire;
+ aevent = (XDamageNotifyEvent *) event;
+ awire->type = aevent->type | (aevent->send_event ? 0x80 : 0);
+ awire->drawable = aevent->drawable;
+ awire->damage = aevent->damage;
+ awire->level = aevent->level | (aevent->more ? DamageNotifyMore : 0);
+ awire->timestamp = aevent->timestamp;
+ awire->area.x = aevent->area.x;
+ awire->area.y = aevent->area.y;
+ awire->area.width = aevent->area.width;
+ awire->area.height = aevent->area.height;
+ awire->geometry.x = aevent->geometry.x;
+ awire->geometry.y = aevent->geometry.y;
+ awire->geometry.width = aevent->geometry.width;
+ awire->geometry.height = aevent->geometry.height;
+ return True;
+ }
+ }
+ return False;
+}
+
+Bool
+XDamageQueryExtension (Display *dpy,
+ int *event_base_return,
+ int *error_base_return)
+{
+ XDamageExtDisplayInfo *info = XDamageFindDisplay (dpy);
+
+ if (XDamageHasExtension(info))
+ {
+ *event_base_return = info->codes->first_event;
+ *error_base_return = info->codes->first_error;
+ return True;
+ }
+ else
+ return False;
+}
+
+Status
+XDamageQueryVersion (Display *dpy,
+ int *major_version_return,
+ int *minor_version_return)
+{
+ XDamageExtDisplayInfo *info = XDamageFindDisplay (dpy);
+
+ XDamageCheckExtension (dpy, info, 0);
+
+ *major_version_return = info->major_version;
+ *minor_version_return = info->minor_version;
+ return 1;
+}
+
+Damage
+XDamageCreate (Display *dpy, Drawable drawable, int level)
+{
+ XDamageExtDisplayInfo *info = XDamageFindDisplay (dpy);
+ xDamageCreateReq *req;
+ Damage damage;
+
+ XDamageCheckExtension (dpy, info, 0);
+ LockDisplay (dpy);
+ GetReq (DamageCreate, req);
+ req->reqType = info->codes->major_opcode;
+ req->damageReqType = X_DamageCreate;
+ req->damage = damage = XAllocID (dpy);
+ req->drawable = drawable;
+ req->level = level;
+ UnlockDisplay (dpy);
+ SyncHandle ();
+ return damage;
+}
+
+void
+XDamageDestroy (Display *dpy, Damage damage)
+{
+ XDamageExtDisplayInfo *info = XDamageFindDisplay (dpy);
+ xDamageDestroyReq *req;
+
+ XDamageSimpleCheckExtension (dpy, info);
+ LockDisplay (dpy);
+ GetReq (DamageDestroy, req);
+ req->reqType = info->codes->major_opcode;
+ req->damageReqType = X_DamageDestroy;
+ req->damage = damage;
+ UnlockDisplay (dpy);
+ SyncHandle ();
+}
+
+void
+XDamageSubtract (Display *dpy, Damage damage,
+ XserverRegion repair, XserverRegion parts)
+{
+ XDamageExtDisplayInfo *info = XDamageFindDisplay (dpy);
+ xDamageSubtractReq *req;
+
+ XDamageSimpleCheckExtension (dpy, info);
+ LockDisplay (dpy);
+ GetReq (DamageSubtract, req);
+ req->reqType = info->codes->major_opcode;
+ req->damageReqType = X_DamageSubtract;
+ req->damage = damage;
+ req->repair = repair;
+ req->parts = parts;
+ UnlockDisplay (dpy);
+ SyncHandle ();
+}
+
+void
+XDamageAdd (Display *dpy, Drawable drawable, XserverRegion region)
+{
+ XDamageExtDisplayInfo *info = XDamageFindDisplay (dpy);
+ xDamageAddReq *req;
+
+ XDamageSimpleCheckExtension (dpy, info);
+ LockDisplay (dpy);
+ GetReq (DamageAdd, req);
+ req->reqType = info->codes->major_opcode;
+ req->damageReqType = X_DamageAdd;
+ req->drawable = drawable;
+ req->region = region;
+
+ UnlockDisplay (dpy);
+ SyncHandle ();
+}
--- /dev/null
+/*
+ * Copyright © 2003 Keith Packard
+ *
+ * Permission to use, copy, modify, distribute, and sell this software and its
+ * documentation for any purpose is hereby granted without fee, provided that
+ * the above copyright notice appear in all copies and that both that
+ * copyright notice and this permission notice appear in supporting
+ * documentation, and that the name of Keith Packard not be used in
+ * advertising or publicity pertaining to distribution of the software without
+ * specific, written prior permission. Keith Packard makes no
+ * representations about the suitability of this software for any purpose. It
+ * is provided "as is" without express or implied warranty.
+ *
+ * KEITH PACKARD DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
+ * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
+ * EVENT SHALL KEITH PACKARD BE LIABLE FOR ANY SPECIAL, INDIRECT OR
+ * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
+ * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
+ * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+ * PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef _XDAMAGEINT_H_
+#define _XDAMAGEINT_H_
+
+#define NEED_EVENTS
+#define NEED_REPLIES
+#include <stdio.h>
+#include <X11/Xlib.h>
+#include <X11/Xlibint.h>
+#include <X11/Xutil.h>
+#include <X11/extensions/damageproto.h>
+#include "Xdamage.h"
+
+typedef struct _XDamageExtDisplayInfo {
+ struct _XDamageExtDisplayInfo *next; /* keep a linked list */
+ Display *display; /* which display this is */
+ XExtCodes *codes; /* the extension protocol codes */
+ int major_version; /* -1 means we don't know */
+ int minor_version; /* -1 means we don't know */
+} XDamageExtDisplayInfo;
+
+/* replaces XExtensionInfo */
+typedef struct _XDamageExtInfo {
+ XDamageExtDisplayInfo *head; /* start of the list */
+ XDamageExtDisplayInfo *cur; /* most recently used */
+ int ndisplays; /* number of displays */
+} XDamageExtInfo;
+
+extern XDamageExtInfo XDamageExtensionInfo;
+extern const char XDamageExtensionName[];
+
+XDamageExtDisplayInfo *
+XDamageFindDisplay (Display *dpy);
+
+#define XDamageHasExtension(i) ((i) && ((i)->codes))
+
+#define XDamageCheckExtension(dpy,i,val) \
+ if (!XDamageHasExtension(i)) { return val; }
+
+#define XDamageSimpleCheckExtension(dpy,i) \
+ if (!XDamageHasExtension(i)) { return; }
+
+#endif /* _XDAMAGEINT_H_ */
--- /dev/null
+prefix=@prefix@
+exec_prefix=@exec_prefix@
+libdir=@libdir@
+includedir=@includedir@
+
+Name: Xdamage
+Description: X Damage Library
+Version: @PACKAGE_VERSION@
+Requires: xproto damageproto >= @DAMAGEEXT_VERSION@ xfixes
+Requires.private: x11 xfixes
+Cflags: -I${includedir}
+Libs: -L${libdir} -lXdamage
projects / framework / uifw / xorg / lib / libxdamage.git / commitdiff