ssb: define boardflags

They are SPROM specific, so all should be defined in ssb code.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

diff --git a/include/linux/ssb/ssb_regs.h b/include/linux/ssb/ssb_regs.h
index efbf459..9894120 100644 (file)
--- a/include/linux/ssb/ssb_regs.h
+++ b/include/linux/ssb/ssb_regs.h
@@ -462,6 +462,46 @@
 #define SSB_SPROM8_OFDM5GLPO           0x014A  /* 5.2GHz OFDM power offset */
 #define SSB_SPROM8_OFDM5GHPO           0x014E  /* 5.8GHz OFDM power offset */
 
+/* Values for boardflags_lo read from SPROM */
+#define SSB_BFL_BTCOEXIST              0x0001  /* implements Bluetooth coexistance */
+#define SSB_BFL_PACTRL                 0x0002  /* GPIO 9 controlling the PA */
+#define SSB_BFL_AIRLINEMODE            0x0004  /* implements GPIO 13 radio disable indication */
+#define SSB_BFL_RSSI                   0x0008  /* software calculates nrssi slope. */
+#define SSB_BFL_ENETSPI                        0x0010  /* has ephy roboswitch spi */
+#define SSB_BFL_XTAL_NOSLOW            0x0020  /* no slow clock available */
+#define SSB_BFL_CCKHIPWR               0x0040  /* can do high power CCK transmission */
+#define SSB_BFL_ENETADM                        0x0080  /* has ADMtek switch */
+#define SSB_BFL_ENETVLAN               0x0100  /* can do vlan */
+#define SSB_BFL_AFTERBURNER            0x0200  /* supports Afterburner mode */
+#define SSB_BFL_NOPCI                  0x0400  /* board leaves PCI floating */
+#define SSB_BFL_FEM                    0x0800  /* supports the Front End Module */
+#define SSB_BFL_EXTLNA                 0x1000  /* has an external LNA */
+#define SSB_BFL_HGPA                   0x2000  /* had high gain PA */
+#define SSB_BFL_BTCMOD                 0x4000  /* BFL_BTCOEXIST is given in alternate GPIOs */
+#define SSB_BFL_ALTIQ                  0x8000  /* alternate I/Q settings */
+
+/* Values for boardflags_hi read from SPROM */
+#define SSB_BFH_NOPA                   0x0001  /* has no PA */
+#define SSB_BFH_RSSIINV                        0x0002  /* RSSI uses positive slope (not TSSI) */
+#define SSB_BFH_PAREF                  0x0004  /* uses the PARef LDO */
+#define SSB_BFH_3TSWITCH               0x0008  /* uses a triple throw switch shared with bluetooth */
+#define SSB_BFH_PHASESHIFT             0x0010  /* can support phase shifter */
+#define SSB_BFH_BUCKBOOST              0x0020  /* has buck/booster */
+#define SSB_BFH_FEM_BT                 0x0040  /* has FEM and switch to share antenna with bluetooth */
+
+/* Values for boardflags2_lo read from SPROM */
+#define SSB_BFL2_RXBB_INT_REG_DIS      0x0001  /* external RX BB regulator present */
+#define SSB_BFL2_APLL_WAR              0x0002  /* alternative A-band PLL settings implemented */
+#define SSB_BFL2_TXPWRCTRL_EN          0x0004  /* permits enabling TX Power Control */
+#define SSB_BFL2_2X4_DIV               0x0008  /* 2x4 diversity switch */
+#define SSB_BFL2_5G_PWRGAIN            0x0010  /* supports 5G band power gain */
+#define SSB_BFL2_PCIEWAR_OVR           0x0020  /* overrides ASPM and Clkreq settings */
+#define SSB_BFL2_CAESERS_BRD           0x0040  /* is Caesers board (unused) */
+#define SSB_BFL2_BTC3WIRE              0x0080  /* used 3-wire bluetooth coexist */
+#define SSB_BFL2_SKWRKFEM_BRD          0x0100  /* 4321mcm93 uses Skyworks FEM */
+#define SSB_BFL2_SPUR_WAR              0x0200  /* has a workaround for clock-harmonic spurs */
+#define SSB_BFL2_GPLL_WAR              0x0400  /* altenative G-band PLL settings implemented */
+
 /* Values for SSB_SPROM1_BINF_CCODE */
 enum {
        SSB_SPROM1CCODE_WORLD = 0,