OMAP3: McBSP: Change the way how the FIFO is handled
authorPeter Ujfalusi <peter.ujfalusi@nokia.com>
Thu, 3 Jun 2010 04:39:33 +0000 (07:39 +0300)
committerLiam Girdwood <lrg@slimlogic.co.uk>
Thu, 3 Jun 2010 15:12:40 +0000 (16:12 +0100)
Use the actual FIFO size in words as buffer_size on OMAP3.
Change the threshold configuration to use 1 based numbering, when
specifying the allowed threshold maximum or the McBSP threshold value.
Set the default maximum threshold to (buffer_size - 0x10) intialy.
>From users of McBSP, now it is expected to use this method.
Asking for threshold 1 means that the value written to threshold registers
are going to be 0, which means 1 word threshold.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Acked-by: Jarkko Nikula <jhnikula@gmail.com>
Acked-by: Mark Brown <broonie@opensource.wolsfonmicro.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
arch/arm/mach-omap2/mcbsp.c
arch/arm/plat-omap/mcbsp.c

index c293370..8fb5e53 100644 (file)
@@ -133,7 +133,7 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
                .rx_irq         = INT_24XX_MCBSP1_IRQ_RX,
                .tx_irq         = INT_24XX_MCBSP1_IRQ_TX,
                .ops            = &omap2_mcbsp_ops,
-               .buffer_size    = 0x6F,
+               .buffer_size    = 0x80, /* The FIFO has 128 locations */
        },
        {
                .phys_base      = OMAP34XX_MCBSP2_BASE,
@@ -143,7 +143,7 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
                .rx_irq         = INT_24XX_MCBSP2_IRQ_RX,
                .tx_irq         = INT_24XX_MCBSP2_IRQ_TX,
                .ops            = &omap2_mcbsp_ops,
-               .buffer_size    = 0x3FF,
+               .buffer_size    = 0x500, /* The FIFO has 1024 + 256 locations */
        },
        {
                .phys_base      = OMAP34XX_MCBSP3_BASE,
@@ -153,7 +153,7 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
                .rx_irq         = INT_24XX_MCBSP3_IRQ_RX,
                .tx_irq         = INT_24XX_MCBSP3_IRQ_TX,
                .ops            = &omap2_mcbsp_ops,
-               .buffer_size    = 0x6F,
+               .buffer_size    = 0x80, /* The FIFO has 128 locations */
        },
        {
                .phys_base      = OMAP34XX_MCBSP4_BASE,
@@ -162,7 +162,7 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
                .rx_irq         = INT_24XX_MCBSP4_IRQ_RX,
                .tx_irq         = INT_24XX_MCBSP4_IRQ_TX,
                .ops            = &omap2_mcbsp_ops,
-               .buffer_size    = 0x6F,
+               .buffer_size    = 0x80, /* The FIFO has 128 locations */
        },
        {
                .phys_base      = OMAP34XX_MCBSP5_BASE,
@@ -171,7 +171,7 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
                .rx_irq         = INT_24XX_MCBSP5_IRQ_RX,
                .tx_irq         = INT_24XX_MCBSP5_IRQ_TX,
                .ops            = &omap2_mcbsp_ops,
-               .buffer_size    = 0x6F,
+               .buffer_size    = 0x80, /* The FIFO has 128 locations */
        },
 };
 #define OMAP34XX_MCBSP_PDATA_SZ                ARRAY_SIZE(omap34xx_mcbsp_pdata)
index 8bab0b2..4ef4604 100644 (file)
@@ -481,9 +481,9 @@ int omap_st_is_enabled(unsigned int id)
 EXPORT_SYMBOL(omap_st_is_enabled);
 
 /*
- * omap_mcbsp_set_tx_threshold configures how to deal
- * with transmit threshold. the threshold value and handler can be
- * configure in here.
+ * omap_mcbsp_set_rx_threshold configures the transmit threshold in words.
+ * The threshold parameter is 1 based, and it is converted (threshold - 1)
+ * for the THRSH2 register.
  */
 void omap_mcbsp_set_tx_threshold(unsigned int id, u16 threshold)
 {
@@ -498,14 +498,15 @@ void omap_mcbsp_set_tx_threshold(unsigned int id, u16 threshold)
        }
        mcbsp = id_to_mcbsp_ptr(id);
 
-       MCBSP_WRITE(mcbsp, THRSH2, threshold);
+       if (threshold && threshold <= mcbsp->max_tx_thres)
+               MCBSP_WRITE(mcbsp, THRSH2, threshold - 1);
 }
 EXPORT_SYMBOL(omap_mcbsp_set_tx_threshold);
 
 /*
- * omap_mcbsp_set_rx_threshold configures how to deal
- * with receive threshold. the threshold value and handler can be
- * configure in here.
+ * omap_mcbsp_set_rx_threshold configures the receive threshold in words.
+ * The threshold parameter is 1 based, and it is converted (threshold - 1)
+ * for the THRSH1 register.
  */
 void omap_mcbsp_set_rx_threshold(unsigned int id, u16 threshold)
 {
@@ -520,7 +521,8 @@ void omap_mcbsp_set_rx_threshold(unsigned int id, u16 threshold)
        }
        mcbsp = id_to_mcbsp_ptr(id);
 
-       MCBSP_WRITE(mcbsp, THRSH1, threshold);
+       if (threshold && threshold <= mcbsp->max_rx_thres)
+               MCBSP_WRITE(mcbsp, THRSH1, threshold - 1);
 }
 EXPORT_SYMBOL(omap_mcbsp_set_rx_threshold);
 
@@ -1697,8 +1699,16 @@ static inline void __devinit omap34xx_device_init(struct omap_mcbsp *mcbsp)
 {
        mcbsp->dma_op_mode = MCBSP_DMA_MODE_ELEMENT;
        if (cpu_is_omap34xx()) {
-               mcbsp->max_tx_thres = max_thres(mcbsp);
-               mcbsp->max_rx_thres = max_thres(mcbsp);
+               /*
+                * Initially configure the maximum thresholds to a safe value.
+                * The McBSP FIFO usage with these values should not go under
+                * 16 locations.
+                * If the whole FIFO without safety buffer is used, than there
+                * is a possibility that the DMA will be not able to push the
+                * new data on time, causing channel shifts in runtime.
+                */
+               mcbsp->max_tx_thres = max_thres(mcbsp) - 0x10;
+               mcbsp->max_rx_thres = max_thres(mcbsp) - 0x10;
                /*
                 * REVISIT: Set dmap_op_mode to THRESHOLD as default
                 * for mcbsp2 instances.