mips: mtmips: move mt7628 related Kconfig into mt7628 subdirectory

This patch is a preparation for add a new soc fot mtmips.

Move all mt7628 related Kconfig (boards and UART selection) into mt7628
subdirectory and make sure the top directory of mtmips contains only
selection for SoCs.

Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>

diff --git a/arch/mips/mach-mtmips/Kconfig b/arch/mips/mach-mtmips/Kconfig
index 737de2c..7c07430 100644 (file)
--- a/arch/mips/mach-mtmips/Kconfig
+++ b/arch/mips/mach-mtmips/Kconfig
@@ -58,57 +58,6 @@ config SOC_MT7628
 
 endchoice
 
-choice
-       prompt "Board select"
-
-config BOARD_GARDENA_SMART_GATEWAY_MT7688
-       bool "GARDENA smart Gateway"
-       depends on SOC_MT7628
-       select BOARD_LATE_INIT
-       help
-         GARDENA smart Gateway boards have a MT7688 SoC with 128 MiB of RAM
-         and 8 MiB of flash (SPI NOR) and additional SPI NAND storage.
-
-config BOARD_LINKIT_SMART_7688
-       bool "LinkIt Smart 7688"
-       depends on SOC_MT7628
-       help
-         Seeed LinkIt Smart 7688 boards have a MT7688 SoC with 128 MiB of RAM
-         and 32 MiB of flash (SPI).
-         Between its different peripherals there's an integrated switch with 4
-         ethernet ports, 1 USB port, 1 UART, GPIO buttons and LEDs, and
-         a MT7688 (PCIe).
-
-config BOARD_MT7628_RFB
-       bool "MediaTek MT7628 RFB"
-       depends on SOC_MT7628
-       help
-         The reference design of MT7628. The board has 128 MiB DDR2, 8 MiB
-         SPI-NOR flash, 1 built-in switch with 5 ports, 1 UART, 1 USB host,
-         1 SDXC, 1 PCIe socket and JTAG pins.
-
-config BOARD_VOCORE2
-       bool "VoCore2"
-       depends on SOC_MT7628
-       select SPL_SERIAL_SUPPORT
-       select SPL_UART2_SPIS_PINMUX
-       help
-         VoCore VoCore2 board has a MT7628 SoC with 128 MiB of RAM
-         and 16 MiB of flash (SPI).
-
-endchoice
-
-config SPL_UART2_SPIS_PINMUX
-       bool "Use alternative pinmux for UART2 in SPL stage"
-       depends on SPL_SERIAL_SUPPORT
-       default n
-       help
-         Select this if the UART2 of your board is connected to GPIO 16/17
-         (shared with SPIS) rather than the usual GPIO 20/21.
-
-source "board/gardena/smart-gateway-mt7688/Kconfig"
-source "board/mediatek/mt7628/Kconfig"
-source "board/seeed/linkit-smart-7688/Kconfig"
-source "board/vocore/vocore2/Kconfig"
+source "arch/mips/mach-mtmips/mt7628/Kconfig"
 
 endmenu

diff --git a/arch/mips/mach-mtmips/mt7628/Kconfig b/arch/mips/mach-mtmips/mt7628/Kconfig
new file mode 100644 (file)
index 0000000..e3f56e7
--- /dev/null
+++ b/arch/mips/mach-mtmips/mt7628/Kconfig
@@ -0,0 +1,53 @@
+
+if SOC_MT7628
+
+choice
+       prompt "Board select"
+
+config BOARD_GARDENA_SMART_GATEWAY_MT7688
+       bool "GARDENA smart Gateway"
+       select BOARD_LATE_INIT
+       help
+         GARDENA smart Gateway boards have a MT7688 SoC with 128 MiB of RAM
+         and 8 MiB of flash (SPI NOR) and additional SPI NAND storage.
+
+config BOARD_LINKIT_SMART_7688
+       bool "LinkIt Smart 7688"
+       help
+         Seeed LinkIt Smart 7688 boards have a MT7688 SoC with 128 MiB of RAM
+         and 32 MiB of flash (SPI).
+         Between its different peripherals there's an integrated switch with 4
+         ethernet ports, 1 USB port, 1 UART, GPIO buttons and LEDs, and
+         a MT7688 (PCIe).
+
+config BOARD_MT7628_RFB
+       bool "MediaTek MT7628 RFB"
+       help
+         The reference design of MT7628. The board has 128 MiB DDR2, 8 MiB
+         SPI-NOR flash, 1 built-in switch with 5 ports, 1 UART, 1 USB host,
+         1 SDXC, 1 PCIe socket and JTAG pins.
+
+config BOARD_VOCORE2
+       bool "VoCore2"
+       select SPL_SERIAL_SUPPORT
+       select SPL_UART2_SPIS_PINMUX
+       help
+         VoCore VoCore2 board has a MT7628 SoC with 128 MiB of RAM
+         and 16 MiB of flash (SPI).
+
+endchoice
+
+config SPL_UART2_SPIS_PINMUX
+       bool "Use alternative pinmux for UART2 in SPL stage"
+       depends on SPL_SERIAL_SUPPORT
+       default n
+       help
+         Select this if the UART2 of your board is connected to GPIO 16/17
+         (shared with SPIS) rather than the usual GPIO 20/21.
+
+source "board/gardena/smart-gateway-mt7688/Kconfig"
+source "board/mediatek/mt7628/Kconfig"
+source "board/seeed/linkit-smart-7688/Kconfig"
+source "board/vocore/vocore2/Kconfig"
+
+endif