--- /dev/null
+/* Copyright 2018 Free Software Foundation, Inc.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>. */
+
+/* The idea here is to, via use of the dwarf assembler, create a function
+ which occupies two non-contiguous address ranges.
+
+ foo_low and foo will be combined into a single function foo with a
+ function bar in between these two ranges.
+
+ This test case was motivated by a bug in which a function which
+ occupied two non-contiguous address ranges was calling another
+ function which resides in between these ranges. So we end up with
+ a situation in which the low/start address of our constructed foo
+ (in this case) will be less than any of the addresses in bar, but
+ the high/end address of foo will be greater than any of bar's
+ addresses.
+
+ This situation was causing a problem in the caching code of
+ find_pc_partial_function: When the low and high addresses of foo
+ are placed in the cache, the simple check that was used to see if
+ the cache was applicable would (incorrectly) succeed when presented
+ with an address in bar. I.e. an address in bar presented as an
+ input to find_pc_partial_function could produce the answer "this
+ address belongs to foo". */
+
+volatile int e = 0;
+
+void
+baz (void)
+{
+ asm ("baz_label: .globl baz_label");
+} /* baz end */
+
+void
+foo_low (void)
+{ /* foo_low prologue */
+ asm ("foo_low_label: .globl foo_low_label");
+ baz (); /* foo_low baz call */
+ asm ("foo_low_label2: .globl foo_low_label2");
+} /* foo_low end */
+
+void
+bar (void)
+{
+ asm ("bar_label: .globl bar_label");
+} /* bar end */
+
+void
+foo (void)
+{ /* foo prologue */
+ asm ("foo_label: .globl foo_label");
+ bar (); /* foo bar call */
+ asm ("foo_label2: .globl foo_label2");
+ if (e) foo_low (); /* foo foo_low call */
+ asm ("foo_label3: .globl foo_label3");
+} /* foo end */
+
+int
+main (void)
+{ /* main prologue */
+ asm ("main_label: .globl main_label");
+ foo (); /* main foo call */
+ asm ("main_label2: .globl main_label2");
+ return 0; /* main return */
+} /* main end */
+
--- /dev/null
+# Copyright 2018 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+load_lib dwarf.exp
+
+# Test DW_AT_ranges in the context of a subprogram scope.
+
+# This test can only be run on targets which support DWARF-2 and use gas.
+if {![dwarf2_support]} {
+ unsupported "dwarf2 support required for this test"
+ return 0
+}
+
+if [get_compiler_info] {
+ return -1
+}
+if !$gcc_compiled {
+ unsupported "gcc required for this test"
+ return 0
+}
+
+standard_testfile dw2-ranges-func.c dw2-ranges-func-dw.S
+
+# We need to know the size of integer and address types in order to
+# write some of the debugging info we'd like to generate.
+#
+# For that, we ask GDB by debugging our test program. Any program
+# would do, but since we already have it specifically for this
+# testcase, might as well use that.
+
+if { [prepare_for_testing "failed to prepare" ${testfile} ${srcfile}] } {
+ return -1
+}
+
+set asm_file [standard_output_file $srcfile2]
+Dwarf::assemble $asm_file {
+ global srcdir subdir srcfile srcfile2
+ declare_labels integer_label volatile_label func_ranges_label cu_ranges_label L
+ set int_size [get_sizeof "int" 4]
+
+ # Find start address and length for our functions.
+ lassign [function_range main [list ${srcdir}/${subdir}/$srcfile]] \
+ main_start main_len
+ set main_end "$main_start + $main_len"
+ lassign [function_range foo [list ${srcdir}/${subdir}/$srcfile]] \
+ foo_start foo_len
+ set foo_end "$foo_start + $foo_len"
+ lassign [function_range foo_low [list ${srcdir}/${subdir}/$srcfile]] \
+ foo_low_start foo_low_len
+ set foo_low_end "$foo_low_start + $foo_low_len"
+ lassign [function_range bar [list ${srcdir}/${subdir}/$srcfile]] \
+ bar_start bar_len
+ set bar_end "$bar_start + $bar_len"
+ lassign [function_range baz [list ${srcdir}/${subdir}/$srcfile]] \
+ baz_start baz_len
+ set baz_end "$baz_start + $baz_len"
+
+ set e_var [gdb_target_symbol e]
+
+ cu {} {
+ compile_unit {
+ {language @DW_LANG_C}
+ {name dw-ranges-func.c}
+ {stmt_list $L DW_FORM_sec_offset}
+ {low_pc 0 addr}
+ {ranges ${cu_ranges_label} DW_FORM_sec_offset}
+ } {
+ integer_label: DW_TAG_base_type {
+ {DW_AT_byte_size $int_size DW_FORM_sdata}
+ {DW_AT_encoding @DW_ATE_signed}
+ {DW_AT_name integer}
+ }
+ volatile_label: DW_TAG_volatile_type {
+ {type :$integer_label}
+ }
+ DW_TAG_variable {
+ {name e}
+ {external 1 flag}
+ {type :$volatile_label}
+ {location {addr $e_var} SPECIAL_expr}
+ }
+ subprogram {
+ {external 1 flag}
+ {name main}
+ {DW_AT_type :$integer_label}
+ {low_pc $main_start addr}
+ {high_pc $main_len DW_FORM_data4}
+ }
+ subprogram {
+ {external 1 flag}
+ {name foo}
+ {ranges ${func_ranges_label} DW_FORM_sec_offset}
+ }
+ subprogram {
+ {external 1 flag}
+ {name bar}
+ {low_pc $bar_start addr}
+ {high_pc $bar_len DW_FORM_data4}
+ }
+ subprogram {
+ {external 1 flag}
+ {name baz}
+ {low_pc $baz_start addr}
+ {high_pc $baz_len DW_FORM_data4}
+ }
+ }
+ }
+
+ lines {version 2} L {
+ include_dir "${srcdir}/${subdir}"
+ file_name "$srcfile" 1
+
+ # Generate a line table program. An attempt was made to make it
+ # reasonably accurate as it made debugging the test case easier.
+ program {
+ {DW_LNE_set_address $main_start}
+ {DW_LNS_advance_line [expr [gdb_get_line_number "main prologue"] - 1]}
+ {DW_LNS_copy}
+ {DW_LNE_set_address main_label}
+ {DW_LNS_advance_line [expr [gdb_get_line_number "main foo call"] - [gdb_get_line_number "main prologue"]]}
+ {DW_LNS_copy}
+ {DW_LNE_set_address main_label2}
+ {DW_LNS_advance_line [expr [gdb_get_line_number "main return"] - [gdb_get_line_number "main foo call"]]}
+ {DW_LNS_copy}
+ {DW_LNE_set_address $main_end}
+ {DW_LNS_advance_line [expr [gdb_get_line_number "main end"] - [gdb_get_line_number "main return"] + 1]}
+ {DW_LNS_copy}
+ {DW_LNE_end_sequence}
+
+ {DW_LNE_set_address $foo_start}
+ {DW_LNS_advance_line [expr [gdb_get_line_number "foo prologue"] - 1] }
+ {DW_LNS_copy}
+ {DW_LNE_set_address foo_label}
+ {DW_LNS_advance_line [expr [gdb_get_line_number "foo bar call"] - [gdb_get_line_number "foo prologue"]]}
+ {DW_LNS_copy}
+ {DW_LNE_set_address foo_label2}
+ {DW_LNS_advance_line [expr [gdb_get_line_number "foo foo_low call"] - [gdb_get_line_number "foo bar call"]]}
+ {DW_LNS_copy}
+ {DW_LNE_set_address foo_label3}
+ {DW_LNS_advance_line [expr [gdb_get_line_number "foo end"] - [gdb_get_line_number "foo foo_low call"]]}
+ {DW_LNS_copy}
+ {DW_LNE_set_address $foo_end}
+ {DW_LNS_advance_line 1}
+ {DW_LNS_copy}
+ {DW_LNE_end_sequence}
+
+ {DW_LNE_set_address $bar_start}
+ {DW_LNS_advance_line [expr [gdb_get_line_number "bar end"] - 1]}
+ {DW_LNS_copy}
+ {DW_LNS_advance_pc $bar_len}
+ {DW_LNS_advance_line 1}
+ {DW_LNS_copy}
+ {DW_LNE_end_sequence}
+
+ {DW_LNE_set_address $baz_start}
+ {DW_LNS_advance_line [expr [gdb_get_line_number "baz end"] - 1]}
+ {DW_LNS_copy}
+ {DW_LNS_advance_pc $baz_len}
+ {DW_LNS_advance_line 1}
+ {DW_LNS_copy}
+ {DW_LNE_end_sequence}
+
+ {DW_LNE_set_address $foo_low_start}
+ {DW_LNS_advance_line [expr [gdb_get_line_number "foo_low prologue"] - 1]}
+ {DW_LNS_copy}
+ {DW_LNE_set_address foo_low_label}
+ {DW_LNS_advance_line [expr [gdb_get_line_number "foo_low baz call"] - [gdb_get_line_number "foo_low prologue"]]}
+ {DW_LNS_copy}
+ {DW_LNE_set_address foo_low_label2}
+ {DW_LNS_advance_line [expr [gdb_get_line_number "foo_low end"] - [gdb_get_line_number "foo_low baz call"]]}
+ {DW_LNS_copy}
+ {DW_LNE_set_address $foo_low_end}
+ {DW_LNS_advance_line 1}
+ {DW_LNS_copy}
+ {DW_LNE_end_sequence}
+ }
+ }
+
+ # Generate ranges data.
+ ranges {is_64 [is_64_target]} {
+ func_ranges_label: sequence {
+ {range {$foo_start } $foo_end}
+ {range {$foo_low_start} $foo_low_end}
+ }
+ cu_ranges_label: sequence {
+ {range {$foo_start } $foo_end}
+ {range {$foo_low_start} $foo_low_end}
+ {range {$main_start} $main_end}
+ {range {$bar_start} $bar_end}
+ {range {$baz_start} $baz_end}
+ }
+ }
+}
+
+if { [prepare_for_testing "failed to prepare" ${testfile} \
+ [list $srcfile $asm_file] {nodebug}] } {
+ return -1
+}
+
+if ![runto_main] {
+ return -1
+}
+
+set main_prologue_line_num [gdb_get_line_number "main prologue"]
+# Do a sanity check to make sure that line number info is available.
+gdb_test "info line main" \
+ "Line ${main_prologue_line_num} of .* starts at address .* and ends at .*"
+
+with_test_prefix "step-test-1" {
+ set bp_foo_bar [gdb_get_line_number "foo bar call"]
+
+ gdb_test "break $bp_foo_bar" \
+ "Breakpoint.*at.* file .*$srcfile, line $bp_foo_bar\\." \
+ "break at call to bar"
+
+ gdb_test "continue" \
+ "Continuing\\..*Breakpoint \[0-9\]+, foo \\(\\).*$bp_foo_bar\\s+bar\\s\\(\\);.*foo bar call.*" \
+ "continue to call of bar"
+
+ gdb_test "step" \
+ "bar \\(\\).*bar end.*" \
+ "step into bar"
+
+ gdb_test "step" \
+ "foo \\(\\).*foo foo_low call.*" \
+ "step out of bar, back into foo"
+}
+
+with_test_prefix "step-test-2" {
+ clean_restart ${testfile}
+ if ![runto_main] {
+ return -1
+ }
+
+ # Note that the RE used for the following test will fail when the
+ # breakpoint has been set on multiple locations. E.g. "(2 locations)".
+ # This is intentional since that behavior is one of the bugs that
+ # this test case tests for.
+ gdb_test "break foo" \
+ "Breakpoint.*at.* file .*$srcfile, line \\d+\\." \
+ "break foo"
+
+ # Continue to foo. Allow execution to stop either on the prologue
+ # or on the call to bar since either behavior is acceptable though
+ # the latter is preferred.
+ set test "continue to foo"
+ gdb_test_multiple "continue" $test {
+ -re "Breakpoint \\d+, foo \\(\\).*foo prologue.*${gdb_prompt}" {
+ pass $test
+ gdb_test "step" \
+ "foo bar call .*" \
+ "step to call of bar after landing on prologue"
+ }
+ -re "Breakpoint \\d+, foo \\(\\).*foo bar call.*${gdb_prompt}" {
+ pass $test
+ }
+ }
+
+ gdb_test "step" \
+ "bar \\(\\).*bar end.*" \
+ "step into bar"
+
+ gdb_test "step" \
+ "foo \\(\\).*foo foo_low call.*" \
+ "step out of bar, back into foo"
+}
+
+clean_restart ${testfile}
+if ![runto_main] {
+ return -1
+}
+
+# Disassembly of foo should have multiple address ranges.
+gdb_test_sequence "disassemble foo" "" [list \
+ "Dump of assembler code for function foo:" \
+ "Address range $hex to $hex:" \
+ " $hex <\\+0>:" \
+ "Address range $hex to $hex:" \
+ " $hex <(.+?)>:" \
+ "End of assembler dump\\." \
+]
+
+set foo_low_addr -1
+set test "x/i foo_low"
+gdb_test_multiple $test $test {
+ -re " ($hex) <foo.*?>.*${gdb_prompt}" {
+ set foo_low_addr $expect_out(1,string)
+ pass $test
+ }
+}
+
+set foo_addr -1
+set test "x/i foo"
+gdb_test_multiple $test $test {
+ -re " ($hex) <foo.*?>.*${gdb_prompt}" {
+ set foo_addr $expect_out(1,string)
+ pass $test
+ }
+}
+
+gdb_assert {$foo_low_addr != $foo_addr} "foo and foo_low are at different addresses"
+
+# This more permissive RE for "break foo" will allow a breakpoint on
+# multiple locations to PASS. */
+gdb_test "break foo" \
+ "Breakpoint.*at.*" \
+ "break foo"
+
+gdb_test "break baz" \
+ "Breakpoint.*at.* file .*$srcfile, line \\d+\\."
+
+gdb_test "continue" \
+ "Breakpoint \\d+, foo \\(\\).*" \
+ "continue to foo"
+
+gdb_test_no_output "set variable e=1"
+
+# If GDB incorrectly places the foo breakpoint on multiple locations,
+# then GDB will (incorrectly) stop in foo_low instead of in baz.
+gdb_test "continue" \
+ "Breakpoint \\d+, (?:$hex in )?baz \\(\\).*" \
+ "continue to baz"
+
+with_test_prefix "step-test-3" {
+ clean_restart ${testfile}
+ if ![runto_main] {
+ return -1
+ }
+
+ gdb_test "step" \
+ "foo \\(\\).*bar \\(\\);.*foo bar call.*" \
+ "step into foo from main"
+
+ gdb_test "step" \
+ "bar \\(\\).*\}.* bar end.*" \
+ "step into bar from foo"
+
+ gdb_test "step" \
+ "foo(_label2)? \\(\\).*foo_low \\(\\);.*foo foo_low call.*" \
+ "step out of bar to foo"
+
+ # The tests in the "enable_foo_low_stepping" section, below, work
+ # with some versions of gcc, though it's not clear that they
+ # should. This test case causes foo_low, originally a separate
+ # function invoked via a subroutine call, to be considered as part
+ # of foo via use of DW_AT_ranges. Real code that I've looked at
+ # uses a branch instruction to cause code in the "cold" range to
+ # be executed.
+ #
+ # For the moment though, these tests have been left in place, but
+ # disabled, in case we decide that making such a subroutine call
+ # is a reasonable thing to do that should also be supported by
+ # GDB.
+
+ set enable_foo_low_stepping false
+
+ if { $enable_foo_low_stepping } {
+ gdb_test_no_output "set variable e=1"
+
+ set test "step into foo_low from foo"
+ gdb_test_multiple "step" $test {
+ -re "foo(_low)? \\(\\).*\{.*foo_low prologue.*${gdb_prompt}" {
+ pass $test
+ gdb_test "step" \
+ "foo \\(\\).*baz \\(\\);.*foo_low baz call.*" \
+ "step to baz call in foo_low"
+
+ }
+ -re "foo(_low)? \\(\\).*baz \\(\\);.*foo_low baz call.*${gdb_prompt}" {
+ pass $test
+ }
+ }
+
+ gdb_test "step" \
+ "baz \\(\\).*\}.*baz end.*" \
+ "step into baz from foo_low"
+
+ gdb_test "step" \
+ "foo(?:_low(?:_label2)?)? \\(\\).*\}.*foo_low end.*" \
+ "step out of baz to foo_low"
+
+ gdb_test "step" \
+ "foo(?:_label3)? \\(\\).*\}.*foo end.*" \
+ "step out of foo_low to foo"
+ } else {
+ gdb_test "next" \
+ ".*foo end.*" \
+ "next over foo_low call"
+ }
+
+ gdb_test "step" \
+ "main(?:_label2)? \\(\\).*" \
+ "step out of foo to main"
+}
projects / external / binutils.git / commitdiff