mxser: integrate mxser.h into .c

As mxser.h serves only mxser.c, integrate the definitions into .c and
drop .h. There are some "semi-public" ioctl definitions, but they are
mostly go away in the next patches. If something, they would need to
live in an uapi header anyway.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210618061516.662-5-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/tty/mxser.c b/drivers/tty/mxser.c
index d91f8e7..0c77955 100644 (file)
--- a/drivers/tty/mxser.c
+++ b/drivers/tty/mxser.c
@@ -41,7 +41,135 @@
 #include <asm/irq.h>
 #include <linux/uaccess.h>
 
-#include "mxser.h"
+/*
+ *     Semi-public control interfaces
+ */
+
+/*
+ *     MOXA ioctls
+ */
+
+#define MOXA                   0x400
+#define MOXA_GETDATACOUNT      (MOXA + 23)
+#define MOXA_DIAGNOSE          (MOXA + 50)
+#define MOXA_CHKPORTENABLE     (MOXA + 60)
+#define MOXA_HighSpeedOn       (MOXA + 61)
+#define MOXA_GET_MAJOR         (MOXA + 63)
+#define MOXA_GETMSTATUS                (MOXA + 65)
+#define MOXA_SET_OP_MODE       (MOXA + 66)
+#define MOXA_GET_OP_MODE       (MOXA + 67)
+
+#define RS232_MODE             0
+#define RS485_2WIRE_MODE       1
+#define RS422_MODE             2
+#define RS485_4WIRE_MODE       3
+#define OP_MODE_MASK           3
+
+#define MOXA_SDS_RSTICOUNTER   (MOXA + 69)
+#define MOXA_ASPP_OQUEUE       (MOXA + 70)
+#define MOXA_ASPP_MON          (MOXA + 73)
+#define MOXA_ASPP_LSTATUS      (MOXA + 74)
+#define MOXA_ASPP_MON_EXT      (MOXA + 75)
+#define MOXA_SET_BAUD_METHOD   (MOXA + 76)
+
+/* --------------------------------------------------- */
+
+#define NPPI_NOTIFY_PARITY     0x01
+#define NPPI_NOTIFY_FRAMING    0x02
+#define NPPI_NOTIFY_HW_OVERRUN 0x04
+#define NPPI_NOTIFY_SW_OVERRUN 0x08
+#define NPPI_NOTIFY_BREAK      0x10
+
+#define NPPI_NOTIFY_CTSHOLD         0x01       /* Tx hold by CTS low */
+#define NPPI_NOTIFY_DSRHOLD         0x02       /* Tx hold by DSR low */
+#define NPPI_NOTIFY_XOFFHOLD        0x08       /* Tx hold by Xoff received */
+#define NPPI_NOTIFY_XOFFXENT        0x10       /* Xoff Sent */
+
+/*
+ * Follow just what Moxa Must chip defines.
+ *
+ * When LCR register (offset 0x03) writes the following value, the Must chip
+ * will enter enchance mode. And write value on EFR (offset 0x02) bit 6,7 to
+ * change bank.
+ */
+#define MOXA_MUST_ENTER_ENCHANCE       0xBF
+
+/* when enhance mode enabled, access on general bank register */
+#define MOXA_MUST_GDL_REGISTER         0x07
+#define MOXA_MUST_GDL_MASK             0x7F
+#define MOXA_MUST_GDL_HAS_BAD_DATA     0x80
+
+#define MOXA_MUST_LSR_RERR             0x80    /* error in receive FIFO */
+/* enchance register bank select and enchance mode setting register */
+/* when LCR register equals to 0xBF */
+#define MOXA_MUST_EFR_REGISTER         0x02
+#define MOXA_MUST_EFR_EFRB_ENABLE      0x10 /* enchance mode enable */
+/* enchance register bank set 0, 1, 2 */
+#define MOXA_MUST_EFR_BANK0            0x00
+#define MOXA_MUST_EFR_BANK1            0x40
+#define MOXA_MUST_EFR_BANK2            0x80
+#define MOXA_MUST_EFR_BANK3            0xC0
+#define MOXA_MUST_EFR_BANK_MASK                0xC0
+
+/* set XON1 value register, when LCR=0xBF and change to bank0 */
+#define MOXA_MUST_XON1_REGISTER                0x04
+
+/* set XON2 value register, when LCR=0xBF and change to bank0 */
+#define MOXA_MUST_XON2_REGISTER                0x05
+
+/* set XOFF1 value register, when LCR=0xBF and change to bank0 */
+#define MOXA_MUST_XOFF1_REGISTER       0x06
+
+/* set XOFF2 value register, when LCR=0xBF and change to bank0 */
+#define MOXA_MUST_XOFF2_REGISTER       0x07
+
+#define MOXA_MUST_RBRTL_REGISTER       0x04
+#define MOXA_MUST_RBRTH_REGISTER       0x05
+#define MOXA_MUST_RBRTI_REGISTER       0x06
+#define MOXA_MUST_THRTL_REGISTER       0x07
+#define MOXA_MUST_ENUM_REGISTER                0x04
+#define MOXA_MUST_HWID_REGISTER                0x05
+#define MOXA_MUST_ECR_REGISTER         0x06
+#define MOXA_MUST_CSR_REGISTER         0x07
+
+#define MOXA_MUST_FCR_GDA_MODE_ENABLE  0x20 /* good data mode enable */
+#define MOXA_MUST_FCR_GDA_ONLY_ENABLE  0x10 /* only good data put into RxFIFO */
+
+#define MOXA_MUST_IER_ECTSI            0x80 /* enable CTS interrupt */
+#define MOXA_MUST_IER_ERTSI            0x40 /* enable RTS interrupt */
+#define MOXA_MUST_IER_XINT             0x20 /* enable Xon/Xoff interrupt */
+#define MOXA_MUST_IER_EGDAI            0x10 /* enable GDA interrupt */
+
+#define MOXA_MUST_RECV_ISR             (UART_IER_RDI | MOXA_MUST_IER_EGDAI)
+
+/* GDA interrupt pending */
+#define MOXA_MUST_IIR_GDA              0x1C
+#define MOXA_MUST_IIR_RDA              0x04
+#define MOXA_MUST_IIR_RTO              0x0C
+#define MOXA_MUST_IIR_LSR              0x06
+
+/* received Xon/Xoff or specical interrupt pending */
+#define MOXA_MUST_IIR_XSC              0x10
+
+/* RTS/CTS change state interrupt pending */
+#define MOXA_MUST_IIR_RTSCTS           0x20
+#define MOXA_MUST_IIR_MASK             0x3E
+
+#define MOXA_MUST_MCR_XON_FLAG         0x40
+#define MOXA_MUST_MCR_XON_ANY          0x80
+#define MOXA_MUST_MCR_TX_XON           0x08
+
+#define MOXA_MUST_EFR_SF_MASK          0x0F /* software flow control on chip mask value */
+#define MOXA_MUST_EFR_SF_TX1           0x08 /* send Xon1/Xoff1 */
+#define MOXA_MUST_EFR_SF_TX2           0x04 /* send Xon2/Xoff2 */
+#define MOXA_MUST_EFR_SF_TX12          0x0C /* send Xon1,Xon2/Xoff1,Xoff2 */
+#define MOXA_MUST_EFR_SF_TX_NO         0x00 /* don't send Xon/Xoff */
+#define MOXA_MUST_EFR_SF_TX_MASK       0x0C /* Tx software flow control mask */
+#define MOXA_MUST_EFR_SF_RX_NO         0x00 /* don't receive Xon/Xoff */
+#define MOXA_MUST_EFR_SF_RX1           0x02 /* receive Xon1/Xoff1 */
+#define MOXA_MUST_EFR_SF_RX2           0x01 /* receive Xon2/Xoff2 */
+#define MOXA_MUST_EFR_SF_RX12          0x03 /* receive Xon1,Xon2/Xoff1,Xoff2 */
+#define MOXA_MUST_EFR_SF_RX_MASK       0x03 /* Rx software flow control mask */
 
 #define        MXSERMAJOR       174
 

diff --git a/drivers/tty/mxser.h b/drivers/tty/mxser.h
deleted file mode 100644 (file)
index e6cb156..0000000
--- a/drivers/tty/mxser.h
+++ /dev/null
@@ -1,151 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _MXSER_H
-#define _MXSER_H
-
-/*
- *     Semi-public control interfaces
- */
-
-/*
- *     MOXA ioctls
- */
-
-#define MOXA                   0x400
-#define MOXA_GETDATACOUNT      (MOXA + 23)
-#define MOXA_DIAGNOSE          (MOXA + 50)
-#define MOXA_CHKPORTENABLE     (MOXA + 60)
-#define MOXA_HighSpeedOn       (MOXA + 61)
-#define MOXA_GET_MAJOR         (MOXA + 63)
-#define MOXA_GETMSTATUS                (MOXA + 65)
-#define MOXA_SET_OP_MODE       (MOXA + 66)
-#define MOXA_GET_OP_MODE       (MOXA + 67)
-
-#define RS232_MODE             0
-#define RS485_2WIRE_MODE       1
-#define RS422_MODE             2
-#define RS485_4WIRE_MODE       3
-#define OP_MODE_MASK           3
-
-#define MOXA_SDS_RSTICOUNTER   (MOXA + 69)
-#define MOXA_ASPP_OQUEUE       (MOXA + 70)
-#define MOXA_ASPP_MON          (MOXA + 73)
-#define MOXA_ASPP_LSTATUS      (MOXA + 74)
-#define MOXA_ASPP_MON_EXT      (MOXA + 75)
-#define MOXA_SET_BAUD_METHOD   (MOXA + 76)
-
-/* --------------------------------------------------- */
-
-#define NPPI_NOTIFY_PARITY     0x01
-#define NPPI_NOTIFY_FRAMING    0x02
-#define NPPI_NOTIFY_HW_OVERRUN 0x04
-#define NPPI_NOTIFY_SW_OVERRUN 0x08
-#define NPPI_NOTIFY_BREAK      0x10
-
-#define NPPI_NOTIFY_CTSHOLD         0x01       /* Tx hold by CTS low */
-#define NPPI_NOTIFY_DSRHOLD         0x02       /* Tx hold by DSR low */
-#define NPPI_NOTIFY_XOFFHOLD        0x08       /* Tx hold by Xoff received */
-#define NPPI_NOTIFY_XOFFXENT        0x10       /* Xoff Sent */
-
-/* follow just for Moxa Must chip define. */
-/* */
-/* when LCR register (offset 0x03) write following value, */
-/* the Must chip will enter enchance mode. And write value */
-/* on EFR (offset 0x02) bit 6,7 to change bank. */
-#define MOXA_MUST_ENTER_ENCHANCE       0xBF
-
-/* when enhance mode enable, access on general bank register */
-#define MOXA_MUST_GDL_REGISTER         0x07
-#define MOXA_MUST_GDL_MASK             0x7F
-#define MOXA_MUST_GDL_HAS_BAD_DATA     0x80
-
-#define MOXA_MUST_LSR_RERR             0x80    /* error in receive FIFO */
-/* enchance register bank select and enchance mode setting register */
-/* when LCR register equal to 0xBF */
-#define MOXA_MUST_EFR_REGISTER         0x02
-/* enchance mode enable */
-#define MOXA_MUST_EFR_EFRB_ENABLE      0x10
-/* enchance reister bank set 0, 1, 2 */
-#define MOXA_MUST_EFR_BANK0            0x00
-#define MOXA_MUST_EFR_BANK1            0x40
-#define MOXA_MUST_EFR_BANK2            0x80
-#define MOXA_MUST_EFR_BANK3            0xC0
-#define MOXA_MUST_EFR_BANK_MASK                0xC0
-
-/* set XON1 value register, when LCR=0xBF and change to bank0 */
-#define MOXA_MUST_XON1_REGISTER                0x04
-
-/* set XON2 value register, when LCR=0xBF and change to bank0 */
-#define MOXA_MUST_XON2_REGISTER                0x05
-
-/* set XOFF1 value register, when LCR=0xBF and change to bank0 */
-#define MOXA_MUST_XOFF1_REGISTER       0x06
-
-/* set XOFF2 value register, when LCR=0xBF and change to bank0 */
-#define MOXA_MUST_XOFF2_REGISTER       0x07
-
-#define MOXA_MUST_RBRTL_REGISTER       0x04
-#define MOXA_MUST_RBRTH_REGISTER       0x05
-#define MOXA_MUST_RBRTI_REGISTER       0x06
-#define MOXA_MUST_THRTL_REGISTER       0x07
-#define MOXA_MUST_ENUM_REGISTER                0x04
-#define MOXA_MUST_HWID_REGISTER                0x05
-#define MOXA_MUST_ECR_REGISTER         0x06
-#define MOXA_MUST_CSR_REGISTER         0x07
-
-/* good data mode enable */
-#define MOXA_MUST_FCR_GDA_MODE_ENABLE  0x20
-/* only good data put into RxFIFO */
-#define MOXA_MUST_FCR_GDA_ONLY_ENABLE  0x10
-
-/* enable CTS interrupt */
-#define MOXA_MUST_IER_ECTSI            0x80
-/* enable RTS interrupt */
-#define MOXA_MUST_IER_ERTSI            0x40
-/* enable Xon/Xoff interrupt */
-#define MOXA_MUST_IER_XINT             0x20
-/* enable GDA interrupt */
-#define MOXA_MUST_IER_EGDAI            0x10
-
-#define MOXA_MUST_RECV_ISR             (UART_IER_RDI | MOXA_MUST_IER_EGDAI)
-
-/* GDA interrupt pending */
-#define MOXA_MUST_IIR_GDA              0x1C
-#define MOXA_MUST_IIR_RDA              0x04
-#define MOXA_MUST_IIR_RTO              0x0C
-#define MOXA_MUST_IIR_LSR              0x06
-
-/* received Xon/Xoff or specical interrupt pending */
-#define MOXA_MUST_IIR_XSC              0x10
-
-/* RTS/CTS change state interrupt pending */
-#define MOXA_MUST_IIR_RTSCTS           0x20
-#define MOXA_MUST_IIR_MASK             0x3E
-
-#define MOXA_MUST_MCR_XON_FLAG         0x40
-#define MOXA_MUST_MCR_XON_ANY          0x80
-#define MOXA_MUST_MCR_TX_XON           0x08
-
-/* software flow control on chip mask value */
-#define MOXA_MUST_EFR_SF_MASK          0x0F
-/* send Xon1/Xoff1 */
-#define MOXA_MUST_EFR_SF_TX1           0x08
-/* send Xon2/Xoff2 */
-#define MOXA_MUST_EFR_SF_TX2           0x04
-/* send Xon1,Xon2/Xoff1,Xoff2 */
-#define MOXA_MUST_EFR_SF_TX12          0x0C
-/* don't send Xon/Xoff */
-#define MOXA_MUST_EFR_SF_TX_NO         0x00
-/* Tx software flow control mask */
-#define MOXA_MUST_EFR_SF_TX_MASK       0x0C
-/* don't receive Xon/Xoff */
-#define MOXA_MUST_EFR_SF_RX_NO         0x00
-/* receive Xon1/Xoff1 */
-#define MOXA_MUST_EFR_SF_RX1           0x02
-/* receive Xon2/Xoff2 */
-#define MOXA_MUST_EFR_SF_RX2           0x01
-/* receive Xon1,Xon2/Xoff1,Xoff2 */
-#define MOXA_MUST_EFR_SF_RX12          0x03
-/* Rx software flow control mask */
-#define MOXA_MUST_EFR_SF_RX_MASK       0x03
-
-#endif