with the register are transmitted in target byte order. The size of
each register and their position within the @samp{g} packet are
determined by the @value{GDBN} internal gdbarch functions
-@code{DEPRECATED_REGISTER_RAW_SIZE} and @code{gdbarch_register_name}. The
-specification of several standard @samp{g} packets is specified below.
+@code{DEPRECATED_REGISTER_RAW_SIZE} and @code{gdbarch_register_name}.
When reading registers from a trace frame (@pxref{Analyze Collected
Data,,Using the Collected Data}), the stub may also return a string of
@itemx Z0,@var{addr},@var{kind}@r{[};@var{cond_list}@dots{}@r{]}@r{[};cmds:@var{persist},@var{cmd_list}@dots{}@r{]}
@cindex @samp{z0} packet
@cindex @samp{Z0} packet
-Insert (@samp{Z0}) or remove (@samp{z0}) a memory breakpoint at address
+Insert (@samp{Z0}) or remove (@samp{z0}) a software breakpoint at address
@var{addr} of type @var{kind}.
-A memory breakpoint is implemented by replacing the instruction at
+A software breakpoint is implemented by replacing the instruction at
@var{addr} with a software breakpoint or trap instruction. The
-@var{kind} is target-specific and typically indicates the size of
-the breakpoint in bytes that should be inserted. E.g., the @sc{arm}
-and @sc{mips} can insert either a 2 or 4 byte breakpoint. Some
-architectures have additional meanings for @var{kind};
-@var{cond_list} is an optional list of conditional expressions in bytecode
-form that should be evaluated on the target's side. These are the
-conditions that should be taken into consideration when deciding if
-the breakpoint trigger should be reported back to @var{GDBN}.
+@var{kind} is target-specific and typically indicates the size of the
+breakpoint in bytes that should be inserted. E.g., the @sc{arm} and
+@sc{mips} can insert either a 2 or 4 byte breakpoint. Some
+architectures have additional meanings for @var{kind}
+(@pxref{Architecture-Specific Protocol Details}); if no
+architecture-specific value is being used, it should be @samp{0}.
+@var{kind} is hex-encoded. @var{cond_list} is an optional list of
+conditional expressions in bytecode form that should be evaluated on
+the target's side. These are the conditions that should be taken into
+consideration when deciding if the breakpoint trigger should be
+reported back to @value{GDBN}.
See also the @samp{swbreak} stop reason (@pxref{swbreak stop reason})
-for how to best report a memory breakpoint event to @value{GDBN}.
+for how to best report a software breakpoint event to @value{GDBN}.
The @var{cond_list} parameter is comprised of a series of expressions,
concatenated without separators. Each expression has the following form:
@end table
-see @ref{Architecture-Specific Protocol Details}.
-
@emph{Implementation note: It is possible for a target to copy or move
-code that contains memory breakpoints (e.g., when implementing
+code that contains software breakpoints (e.g., when implementing
overlays). The behavior of this packet, in the presence of such a
target, is not defined.}
@end table
@item z1,@var{addr},@var{kind}
-@itemx Z1,@var{addr},@var{kind}@r{[};@var{cond_list}@dots{}@r{]}
+@itemx Z1,@var{addr},@var{kind}@r{[};@var{cond_list}@dots{}@r{]}@r{[};cmds:@var{persist},@var{cmd_list}@dots{}@r{]}
@cindex @samp{z1} packet
@cindex @samp{Z1} packet
Insert (@samp{Z1}) or remove (@samp{z1}) a hardware breakpoint at
address @var{addr}.
A hardware breakpoint is implemented using a mechanism that is not
-dependant on being able to modify the target's memory. The @var{kind}
-and @var{cond_list} have the same meaning as in @samp{Z0} packets.
+dependent on being able to modify the target's memory. The
+@var{kind}, @var{cond_list}, and @var{cmd_list} arguments have the
+same meaning as in @samp{Z0} packets.
@emph{Implementation note: A hardware breakpoint is not affected by code
movement.}
number} is defined by the header @file{include/gdb/signals.h} in the
@value{GDBN} source code.
+In non-stop mode, the server will simply reply @samp{OK} to commands
+such as @samp{vCont}; any stop will be the subject of a future
+notification. @xref{Remote Non-Stop}.
+
As in the description of request packets, we include spaces in the
reply templates for clarity; these are not part of the reply packet's
syntax. No @value{GDBN} stop reply packet uses spaces to separate its
@item swbreak
@anchor{swbreak stop reason}
-The packet indicates a memory breakpoint instruction was executed,
+The packet indicates a software breakpoint instruction was executed,
irrespective of whether it was @value{GDBN} that planted the
breakpoint or the breakpoint is hardcoded in the program. The @var{r}
part must be left empty.
is stopped until @value{GDBN} sets it running with a resumption packet
(@pxref{vCont packet}). This packet should not be sent by default;
@value{GDBN} requests it with the @ref{QThreadEvents} packet. See
-also the @samp{w} (@ref{thread exit event}) remote reply below.
+also the @samp{w} (@pxref{thread exit event}) remote reply below. The
+@var{r} part is ignored.
@end table
The process exited, and @var{AA} is the exit status. This is only
applicable to certain targets.
-The second form of the response, including the process ID of the exited
-process, can be used only when @value{GDBN} has reported support for
-multiprocess protocol extensions; see @ref{multiprocess extensions}.
-The @var{pid} is formatted as a big-endian hex string.
+The second form of the response, including the process ID of the
+exited process, can be used only when @value{GDBN} has reported
+support for multiprocess protocol extensions; see @ref{multiprocess
+extensions}. Both @var{AA} and @var{pid} are formatted as big-endian
+hex strings.
@item X @var{AA}
@itemx X @var{AA} ; process:@var{pid}
The second form of the response, including the process ID of the
terminated process, can be used only when @value{GDBN} has reported
support for multiprocess protocol extensions; see @ref{multiprocess
-extensions}. The @var{pid} is formatted as a big-endian hex string.
+extensions}. Both @var{AA} and @var{pid} are formatted as big-endian
+hex strings.
@anchor{thread exit event}
@cindex thread exit event, remote reply
The thread exited, and @var{AA} is the exit status. This response
should not be sent by default; @value{GDBN} requests it with the
@ref{QThreadEvents} packet. See also @ref{thread create event} above.
+@var{AA} is formatted as a big-endian hex string.
@item N
There are no resumed threads left in the target. In other words, even
The process of asynchronous notification can be illustrated by the
following example:
@smallexample
-<- @code{%%Stop:T0505:98e7ffbf;04:4ce6ffbf;08:b1b6e54c;thread:p7526.7526;core:0;}
+<- @code{%Stop:T0505:98e7ffbf;04:4ce6ffbf;08:b1b6e54c;thread:p7526.7526;core:0;}
@code{...}
-> @code{vStopped}
<- @code{T0505:68f37db7;04:40f37db7;08:63850408;thread:p7526.7528;core:0;}
projects / external / binutils.git / commitdiff