recording file death
authorK. Richard Pixley <rich@cygnus>
Tue, 8 Dec 1992 04:59:31 +0000 (04:59 +0000)
committerK. Richard Pixley <rich@cygnus>
Tue, 8 Dec 1992 04:59:31 +0000 (04:59 +0000)
382 files changed:
bfd/Makefile [deleted file]
bfd/aout.c [deleted file]
bfd/aoutx.c [deleted file]
bfd/archures.h [deleted file]
bfd/awkscan [deleted file]
bfd/awkscan-ip [deleted file]
bfd/awkscan-p [deleted file]
bfd/bfd.doc [deleted file]
bfd/bfd.doc.ps [deleted file]
bfd/bfd.texinfo [deleted file]
bfd/blins-p [deleted file]
bfd/coff-code.h [deleted file]
bfd/coffish.h [deleted file]
bfd/coffswap.c [deleted file]
bfd/config.sub [deleted file]
bfd/configdos.bat [deleted file]
bfd/configure [deleted file]
bfd/cplus-dem.c [deleted file]
bfd/doc/Makefile [deleted file]
bfd/doc/awkscan [deleted file]
bfd/doc/awkscan-ip [deleted file]
bfd/doc/awkscan-p [deleted file]
bfd/doc/bfd.info [deleted file]
bfd/doc/bfdinfo [deleted file]
bfd/doc/blins-p [deleted file]
bfd/doc/exfil1-p [deleted file]
bfd/doc/exfil3-p [deleted file]
bfd/doc/exfilter [deleted file]
bfd/doc/exfilter-p [deleted file]
bfd/doc/exfiltst [deleted file]
bfd/doc/exmerge [deleted file]
bfd/doc/intobfd [deleted file]
bfd/doc/mergecom-p [deleted file]
bfd/doc/movecom-p [deleted file]
bfd/doc/scanit [deleted file]
bfd/doc/scanph [deleted file]
bfd/doc/sedscript [deleted file]
bfd/doc/sedscript-p [deleted file]
bfd/doc/startcom-p [deleted file]
bfd/doc/tolibbfd [deleted file]
bfd/doc/tolibcoff [deleted file]
bfd/doc/unPROTO [deleted file]
bfd/exfilter [deleted file]
bfd/exmerge [deleted file]
bfd/hosts/h-m68kv.h [deleted file]
bfd/hosts/hp9000.h [deleted file]
bfd/howto.c [deleted file]
bfd/intobfd [deleted file]
bfd/makefile.dos [deleted file]
bfd/mergecom-p [deleted file]
bfd/misc.c [deleted file]
bfd/misc.h [deleted file]
bfd/movecom-p [deleted file]
bfd/obstack.c [deleted file]
bfd/obstack.h [deleted file]
bfd/opc-sparc.c [deleted file]
bfd/scanit [deleted file]
bfd/scanph [deleted file]
bfd/sedscript [deleted file]
bfd/sedscript-p [deleted file]
bfd/sparc-opc.c [deleted file]
bfd/startcom-p [deleted file]
bfd/tolibbfd [deleted file]
bfd/tolibcoff [deleted file]
bfd/trad-core.h [deleted file]
bfd/unPROTO [deleted file]
binutils/binutils.texinfo [deleted file]
binutils/config.sub [deleted file]
binutils/configdos.bat [deleted file]
binutils/cplus-dem.c [deleted file]
binutils/makefile.dos [deleted file]
binutils/ostrip.c [deleted file]
binutils/strip.c [deleted file]
config/mh-solaris2 [deleted file]
config/mh-svr4 [deleted file]
config/mt-OSE68000 [deleted file]
config/mt-OSE68k [deleted file]
gas/GNUmakefile-host [deleted file]
gas/Makefile-intel [deleted file]
gas/Makefile.generic [deleted file]
gas/Makefile.loic [deleted file]
gas/VERSION [deleted file]
gas/a.out.gnu.h [deleted file]
gas/config.sub [deleted file]
gas/config/ChangeLog [deleted file]
gas/config/a.out.gnu.h [deleted file]
gas/config/a.out.h [deleted file]
gas/config/coff.gnu.h [deleted file]
gas/config/ho-a29k.h [deleted file]
gas/config/ho-cygnus.h [deleted file]
gas/config/mh-a29k [deleted file]
gas/config/mh-cygnus [deleted file]
gas/config/obj-coff-bfd.c [deleted file]
gas/config/obj-coff-bfd.h [deleted file]
gas/config/ranlib.h [deleted file]
gas/config/signame.h [deleted file]
gas/config/stab.h [deleted file]
gas/config/tc-m68kmote.c [deleted file]
gas/config/tc-m68kmote.h [deleted file]
gas/config/te-motor.h [deleted file]
gas/config/te-sparc.h [deleted file]
gas/config/te-unisoft.h [deleted file]
gas/config/tmake-sun3 [deleted file]
gas/configdos.bat [deleted file]
gas/configure [deleted file]
gas/configure.was [deleted file]
gas/doc/Makefile [deleted file]
gas/flonum-const.c [deleted file]
gas/gas-format.el [deleted file]
gas/makefile.dos [deleted file]
gas/objdump.c [deleted file]
gas/obstack.c [deleted file]
gas/obstack.h [deleted file]
gas/strerror.c [deleted file]
gas/strstr.c [deleted file]
gas/xrealloc.c [deleted file]
gdb/Makefile
gdb/Makefile.dist [deleted file]
gdb/Makefile.sdir [deleted file]
gdb/Makefile.srcdir [deleted file]
gdb/WHATS.NEW [deleted file]
gdb/a68v-xdep.c
gdb/ansidecl.h [deleted file]
gdb/arm-opcode.h [deleted file]
gdb/cadillac-patches
gdb/cadillac.c
gdb/config.gdb [deleted file]
gdb/config.status [deleted file]
gdb/config.sub
gdb/config/altosgas.mh [deleted file]
gdb/config/altosgas.mt [deleted file]
gdb/config/am29k [deleted file]
gdb/config/go32.mt [deleted file]
gdb/config/i386sco.mt [deleted file]
gdb/config/i386v-g.mh [deleted file]
gdb/config/i386v-g.mt [deleted file]
gdb/config/i386v32-g.mh [deleted file]
gdb/config/i386v32-g.mt [deleted file]
gdb/config/i386v32.mt [deleted file]
gdb/config/i960.mt [deleted file]
gdb/config/mh-vax [deleted file]
gdb/config/mt-h8300hds [deleted file]
gdb/config/news1000.mt [deleted file]
gdb/config/sun3.mh [deleted file]
gdb/config/sun3.mt [deleted file]
gdb/config/sun4.mh [deleted file]
gdb/config/sun4.mt [deleted file]
gdb/config/sun4os3.mh [deleted file]
gdb/config/sun4os3.mt [deleted file]
gdb/config/sun4os5.mh [deleted file]
gdb/config/sun4os5.mt [deleted file]
gdb/configure [deleted file]
gdb/convex-opcode.h [deleted file]
gdb/cplus-dem.c [deleted file]
gdb/demangle.h
gdb/doc/Makefile
gdb/doc/gdb-all.texi
gdb/doc/gdb.alter-m4
gdb/doc/gdb.bugs-m4
gdb/doc/gdb.canned-m4
gdb/doc/gdb.cmds-m4
gdb/doc/gdb.ctl-m4
gdb/doc/gdb.data-m4
gdb/doc/gdb.emacs-m4
gdb/doc/gdb.files-m4
gdb/doc/gdb.gpl-m4
gdb/doc/gdb.install-m4
gdb/doc/gdb.invoc-m4
gdb/doc/gdb.rdln-m4
gdb/doc/gdb.rename-m4
gdb/doc/gdb.run-m4
gdb/doc/gdb.sample-m4
gdb/doc/gdb.src-m4
gdb/doc/gdb.stack-m4
gdb/doc/gdb.stop-m4
gdb/doc/gdb.symb-m4
gdb/doc/gdb.tgts-m4
gdb/doc/gdb.top-m4
gdb/doc/gdbinv-m.m4
gdb/doc/gdbinv-s.m4
gdb/doc/interim-gdb.texinfo
gdb/doc/interim-gdbinv-m.m4
gdb/doc/interim-gdbinv-s.m4
gdb/doc/rc-cm.tex
gdb/doc/rc-ps.tex
gdb/doc/rc-pslong.tex
gdb/doc/rdl-apps.texi
gdb/doc/threecol.tex [deleted file]
gdb/ecoff.c
gdb/expread.tab.c [deleted file]
gdb/expread.y [deleted file]
gdb/gdb-int.texinfo [deleted file]
gdb/getpagesize.h [deleted file]
gdb/gmalloc.c [deleted file]
gdb/gmalloc.h [deleted file]
gdb/go32-nat.c [deleted file]
gdb/hds-tdep.c
gdb/hp300hpux-xdep.c [deleted file]
gdb/hp300ux-xdep.c [deleted file]
gdb/hppa-coredep.c
gdb/hppab-xdep.c
gdb/hppabsd-core.c
gdb/hppabsd-tdep.c [deleted file]
gdb/hppabsd-xdep.c
gdb/hppah-xdep.c
gdb/hppahpux-tdep.c
gdb/hppahpux-xdep.c
gdb/i386-xdep.c [deleted file]
gdb/m68k-opcode.h [deleted file]
gdb/m88k-opcode.h
gdb/m88k-xdep.c
gdb/mach386-xdep.c
gdb/mcheck.c [deleted file]
gdb/mips-opcode.h [deleted file]
gdb/mips-xdep.c [deleted file]
gdb/mmap-alloc.c
gdb/mmap-sbrk.c
gdb/mtrace.awk [deleted file]
gdb/mtrace.c [deleted file]
gdb/nat-sparc.c
gdb/nat-sun4os4.h
gdb/nat-trash.h
gdb/np1-opcode.h [deleted file]
gdb/obstack.c [deleted file]
gdb/obstack.h [deleted file]
gdb/param-no-tm.h [deleted file]
gdb/param.h [deleted file]
gdb/pn-opcode.h [deleted file]
gdb/pyr-opcode.h [deleted file]
gdb/rem-m68k.shar [deleted file]
gdb/remote-multi.shar [deleted file]
gdb/remote-sa.m68k.shar [deleted file]
gdb/remote-ser.c
gdb/remote-vx.68.c [deleted file]
gdb/rs6000-xdep.c
gdb/rs6k-opcode.def
gdb/rs6k-opcode.h
gdb/signame.c [deleted file]
gdb/signame.h [deleted file]
gdb/sparc-opcode.h [deleted file]
gdb/sparc-xdep.c [deleted file]
gdb/stab.def [deleted file]
gdb/stddef.h [deleted file]
gdb/stdlib.h [deleted file]
gdb/sun3-xdep.c [deleted file]
gdb/sun386-xdep.c [deleted file]
gdb/symmetry-tdep.c [deleted file]
gdb/symmetry-xdep.c [deleted file]
gdb/tahoe-opcode.h [deleted file]
gdb/tdesc.c [deleted file]
gdb/tdesc.h [deleted file]
gdb/tm-altosgas.h [deleted file]
gdb/tm-hppabsd.h
gdb/tm-hppahpux.h
gdb/tm-i386v-g.h [deleted file]
gdb/tm-sun4os5.h
gdb/tm-svr4.h
gdb/tm-vxworks68.h [deleted file]
gdb/tm-vxworks960.h [deleted file]
gdb/vax-opcode.h [deleted file]
gdb/xm-hppabsd.h
gdb/xm-hppahpux.h
gdb/xm-sun4os5.h
gdb/xm-svr4.h
ld/Makefile [deleted file]
ld/PORTING [deleted file]
ld/config.sub [deleted file]
ld/config/OSE68.mt [deleted file]
ld/config/decstation.mh [deleted file]
ld/config/h-i386v [deleted file]
ld/config/h-m68kv [deleted file]
ld/config/hmake-dec3100 [deleted file]
ld/config/hmake-dgux [deleted file]
ld/config/hmake-rtbsd [deleted file]
ld/config/hmake-sun3 [deleted file]
ld/config/hmake-sun4 [deleted file]
ld/config/hmake-sun4-64 [deleted file]
ld/config/hp300bsd.mh [deleted file]
ld/config/hp9000.mh [deleted file]
ld/config/news.mh [deleted file]
ld/config/sparc.mh [deleted file]
ld/config/tmake-coff-a29k [deleted file]
ld/config/tmake-m88k-bcs [deleted file]
ld/config/tmake-sun4 [deleted file]
ld/configdos.bat [deleted file]
ld/cplus-dem.c [deleted file]
ld/descrip.mms [deleted file]
ld/ebmon29k.sc [deleted file]
ld/gld.1 [deleted file]
ld/h8300hds.c [deleted file]
ld/h8300hds.sc [deleted file]
ld/h8300hms.c [deleted file]
ld/h8300hms.sc [deleted file]
ld/i386aout.c [deleted file]
ld/i386aout.sc [deleted file]
ld/ld-emul.c [deleted file]
ld/ld-gld-Ur.script [deleted file]
ld/ld-gld-r.script [deleted file]
ld/ld-gld.c [deleted file]
ld/ld-gld.script [deleted file]
ld/ld-gld68k-Ur.script [deleted file]
ld/ld-gld68k-r.script [deleted file]
ld/ld-gld68k.c [deleted file]
ld/ld-gld68k.script [deleted file]
ld/ld-gld960.c [deleted file]
ld/ld-gld960.script [deleted file]
ld/ld-gldm88kbcs-Ur.script [deleted file]
ld/ld-gldm88kbcs-r.script [deleted file]
ld/ld-gldm88kbcs.c [deleted file]
ld/ld-gldm88kbcs.script [deleted file]
ld/ld-lnk960-r.script [deleted file]
ld/ld-lnk960.c [deleted file]
ld/ld-lnk960.script [deleted file]
ld/ld-vanilla.c [deleted file]
ld/ld.tex [deleted file]
ld/ldgld.c [deleted file]
ld/ldgld.sc [deleted file]
ld/ldgld.script [deleted file]
ld/ldgld68k.c [deleted file]
ld/ldgld68k.sc [deleted file]
ld/ldgld68k.script [deleted file]
ld/ldgld68kUr.sc [deleted file]
ld/ldgld68kUr.script [deleted file]
ld/ldgld68kr.sc [deleted file]
ld/ldgld68kr.script [deleted file]
ld/ldgld960.c [deleted file]
ld/ldgld960.sc [deleted file]
ld/ldgld960.script [deleted file]
ld/ldgldUr.sc [deleted file]
ld/ldgldUr.script [deleted file]
ld/ldglda29k.c [deleted file]
ld/ldglda29k.sc [deleted file]
ld/ldglda29k.script [deleted file]
ld/ldglda29kUr.sc [deleted file]
ld/ldglda29kUr.script [deleted file]
ld/ldglda29kr.sc [deleted file]
ld/ldglda29kr.script [deleted file]
ld/ldgldi386v.c [deleted file]
ld/ldgldi386v.sc [deleted file]
ld/ldgldi386vUr.sc [deleted file]
ld/ldgldi386vr.sc [deleted file]
ld/ldgldm68kv.c [deleted file]
ld/ldgldm68kv.sc [deleted file]
ld/ldgldm68kvUr.sc [deleted file]
ld/ldgldm68kvr.sc [deleted file]
ld/ldgldm88kbcs.c [deleted file]
ld/ldgldm88kbcs.sc [deleted file]
ld/ldgldm88kbcs.script [deleted file]
ld/ldgldm88kbcsUr.sc [deleted file]
ld/ldgldm88kbcsUr.script [deleted file]
ld/ldgldm88kbcsr.sc [deleted file]
ld/ldgldm88kbcsr.script [deleted file]
ld/ldgldr.sc [deleted file]
ld/ldgldr.script [deleted file]
ld/ldlnk960.c [deleted file]
ld/ldlnk960.sc [deleted file]
ld/ldlnk960.script [deleted file]
ld/ldlnk960r.sc [deleted file]
ld/ldlnk960r.script [deleted file]
ld/ldm88k.c [deleted file]
ld/ldm88k.sc [deleted file]
ld/ldm88kUr.sc [deleted file]
ld/ldm88kr.sc [deleted file]
ld/ldtemplate [deleted file]
ld/ldvanilla.c [deleted file]
ld/makefile.dos [deleted file]
ld/news.sc [deleted file]
ld/saber [deleted file]
readline/config.sub [deleted file]
readline/configure [deleted file]
readline/doc/history.info [deleted file]
readline/doc/readline.info [deleted file]
readline/history.texi [deleted file]
readline/history.texinfo [deleted file]
readline/inc-hist.texi [deleted file]
readline/inc-history.texinfo [deleted file]
readline/inc-read.texi [deleted file]
readline/inc-readline.texinfo [deleted file]
readline/readline.texi [deleted file]
readline/readline.texinfo [deleted file]
readline/sysdep-newsos.h [deleted file]
readline/sysdep-oldbsd.h [deleted file]

diff --git a/bfd/Makefile b/bfd/Makefile
deleted file mode 100755 (executable)
index b20e954..0000000
+++ /dev/null
@@ -1,149 +0,0 @@
-#
-# Copyright (C) 1990, 1991 Free Software Foundation, Inc.
-#
-# This file is part of BFD, the Binary File Diddler.
-#
-# BFD is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 1, or (at your option)
-# any later version.
-#
-# BFD is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with BFD; see the file COPYING.  If not, write to
-# the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-# $Id$
-
-srcdir=../common
-VPATH=../common
-RANLIB = ranlib
-CSWITCHES = -g  # -Wall
-CC=gcc -Wall
-#__sun4__#CDEFINES=-DHOST_SYS=SUN4_SYS
-#__sun3__#CDEFINES=-DHOST_SYS=SUN3_SYS
-#__dgux__#CDEFINES=-DHOST_SYS=DGUX_SYS
-#__dgux__#RANLIB=echo 
-INCDIR = ${srcdir}/../../include-cygnus
-CSEARCH = -I$(INCDIR)
-
-TARG = libbfd.a
-CFLAGS = $(CDEFINES) $(CSEARCH) $(CSWITCHES) 
-
-
-BFD_LIBS = libbfd.o opncls.o bfd.o archive.o targets.o cache.o archures.o obstack.o
-
-BFD_BACKENDS = oasys.o ieee.o srec.o  sunos.o icoff.o b.out.o m88k-bcs.o
-
-BFD_H=$(INCDIR)/bfd.h
-SYSDEP_H=$(INCDIR)/sysdep.h
-
-# C source files that correspond to .o's.
-CFILES = libbfd.c opncls.c bfd.c archive.c targets.c cache.c archures.c \
-        sunos.c icoff.c b.out.c  srec.c oasys.c ieee.c m88k-bcs.c
-
-all: $(TARG) 
-
-POINTOS = $(BFD_LIBS) $(BFD_BACKENDS)
-
-$(TARG): $(POINTOS)
-        rm -f $(TARG)
-        ar clq $(TARG) $(BFD_LIBS) $(BFD_BACKENDS)
-        $(RANLIB) $(TARG)
-
-tags etags: TAGS
-
-TAGS: .force
-       etags $(INCDIR)/*.h *.h *.c
-
-clean:
-       rm -f $(BFD_LIBS) $(BFD_BACKENDS) *~ core libbfd.a
-
-clobber realclean: clean
-       rm -f libbfd.a TAGS
-
-$(BFD_LIBS) $(BFD_BACKENDS):  libbfd.h $(BFD_H)
-
-archive.o : archive.c libbfd.h $(BFD_H) $(SYSDEP_H)  
-archures.o : archures.c $(BFD_H) $(SYSDEP_H) archures.h 
-b.out.o : b.out.c libbfd.h $(BFD_H) $(SYSDEP_H) liba.out.h archures.h 
-m88k-bcs.o: m88k-bcs.c libbfd.h $(BFD_H) $(SYSDEP_H) libcoff.h coff-code.h archures.h 
-bfd.o : bfd.c libbfd.h $(BFD_H) $(SYSDEP_H)     
-cache.o : cache.c libbfd.h $(BFD_H) $(SYSDEP_H)     
-coff.o : coff.c  
-cplus-dem.o : cplus-dem.c  
-filemode.o : filemode.c 
-icoff.o : icoff.c libbfd.h $(BFD_H) $(SYSDEP_H) libcoff.h coff-code.h archures.h 
-libbfd.o : libbfd.c libbfd.h $(BFD_H) $(SYSDEP_H)      
-misc.o : misc.c 
-opncls.o : opncls.c libbfd.h $(BFD_H) $(SYSDEP_H)     
-sunos.o : sunos.c libbfd.h $(BFD_H) $(SYSDEP_H) liba.out.h
-targets.o : targets.c libbfd.h $(BFD_H) $(SYSDEP_H)      
-obstack.o:obstack.c
-ieee.o:ieee.c
-oasys.o:oasys.c
-srec.o:srec.c
-
-
-
-version.c: FORCE
-       rm -f version.c
-       echo "char ${TARG}_ver[]= \"${TARG} `cat VERSION`, `date`\";" > version.c
-
-
-# This target should be invoked before building a new release.
-# 'VERSION' file must be present and contain a string of the form "x.y"
-#
-roll:
-       @V=`cat VERSION`                ; \
-       MAJ=`sed 's/\..*//' VERSION`    ; \
-       MIN=`sed 's/.*\.//' VERSION`    ; \
-       V=$$MAJ.`expr $$MIN + 1`        ; \
-       rm -f VERSION                   ; \
-       echo $$V >VERSION               ; \
-       echo Version $$V
-
-# Dummy target to force execution of dependent targets.
-#
-.force:
-FORCE:
-
-# 'G960BASE' will be defined at invocation
-install:
-       make ${TARG} OPT=-O
-
-# Target to uncomment host-specific lines in this makefile.  Such lines must
-# have the following string beginning in column 1: #__<hostname>__#
-# Original Makefile is backed up as 'Makefile.old'.
-#
-# Invoke with:  make make HOST=xxx
-#
-make:
-       -@if test $(HOST)x = x ; then \
-               echo '\aSpecify "make make HOST=???"'; \
-               exit 1; \
-       fi ; \
-       grep -s "^#The next line was generated by 'make make'" Makefile; \
-       if test $$? = 0 ; then  \
-               echo "\aMakefile has already been processed with 'make make'";\
-               exit 1; \
-       fi ; \
-       mv -f Makefile Makefile.old; \
-       echo "# " >Makefile ;\
-       echo "# " >>Makefile  ;\
-       echo "#   D A N G E R"  >>Makefile ;\
-       echo "# " >>Makefile ;\
-       echo "#   This file was created by make make, change the source in ../common" >>Makefile ; \
-       echo "#The next line was generated by 'make make'"       >>Makefile ; \
-       echo "HOST=$(HOST)"                                     >>Makefile ; \
-       echo                                                    >>Makefile ; \
-       sed "s/^#__$(HOST)__#//" < Makefile.old                 >>Makefile
-
-Makefile: ../common/Makefile
-       mv Makefile Makefile.backup
-       cp ../common/Makefile .
-       $(MAKE) "HOST=$(HOST)" make
diff --git a/bfd/aout.c b/bfd/aout.c
deleted file mode 100755 (executable)
index 8a795e2..0000000
+++ /dev/null
@@ -1,1500 +0,0 @@
-/* BFD semi-generic back-end for a.out binaries */
-
-/* Copyright (C) 1990, 1991 Free Software Foundation, Inc.
-
-This file is part of BFD, the Binary File Diddler.
-
-BFD is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 1, or (at your option)
-any later version.
-
-BFD is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with BFD; see the file COPYING.  If not, write to
-the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-
-#include <ansidecl.h>
-#include <sysdep.h>
-#include "bfd.h"
-#include "libbfd.h"
-
-#include "a.out.gnu.h"
-#include "stab.gnu.h"
-#include "ar.h"
-#include "liba.out.h"           /* BFD a.out internal data structures */
-
-void (*bfd_error_trap)();
-
-/*SUPPRESS558*/
-/*SUPPRESS529*/
-
-#define CTOR_TABLE_RELOC_IDX 2
-static  reloc_howto_type howto_table_ext[] = 
-{
-  HOWTO(RELOC_8,      0,  0,   8,  false, 0, true,  true,0,"8",      false, 0,0x000000ff, false),
-  HOWTO(RELOC_16,     0,  1,   16, false, 0, true,  true,0,"16",      false, 0,0x0000ffff, false),
-  HOWTO(RELOC_32,     0,  2,   32, false, 0, true,  true,0,"32",      false, 0,0xffffffff, false),
-  HOWTO(RELOC_DISP8,  0,  0,   8,  true,  0, false, true,0,"DISP8",    false, 0,0x000000ff, false),
-  HOWTO(RELOC_DISP16, 0,  1,   16, true,  0, false, true,0,"DISP16",   false, 0,0x0000ffff, false),
-  HOWTO(RELOC_DISP32, 0,  2,   32, true,  0, false, true,0,"DISP32",   false, 0,0xffffffff, false),
-  HOWTO(RELOC_WDISP30,2,  2,   30, true,  0, false, true,0,"WDISP30",  false, 0,0x3fffffff, false),
-  HOWTO(RELOC_WDISP22,2,  2,   22, true,  0, false, true,0,"WDISP22",  false, 0,0x003fffff, false),
-  HOWTO(RELOC_HI22,   10, 2,   22, false, 0, false, true,0,"HI22",     false, 0,0x003fffff, false),
-  HOWTO(RELOC_22,      0, 2,   22, false, 0, false, true,0,"22",       false, 0,0x003fffff, false),
-  HOWTO(RELOC_13,      0, 2,   13, false, 0, false, true,0,"13",       false, 0,0x00001fff, false),
-  HOWTO(RELOC_LO10,    0, 2,   10, false, 0, false, true,0,"LO10",     false, 0,0x000003ff, false),
-  HOWTO(RELOC_SFA_BASE,0, 2,   32, false, 0, false, true,0,"SFA_BASE", false, 0,0xffffffff, false),
-  HOWTO(RELOC_SFA_OFF13,0,2,   32, false, 0, false, true,0,"SFA_OFF13",false, 0,0xffffffff, false),
-  HOWTO(RELOC_BASE10, 0,  2,   16, false, 0, false, true,0,"BASE10",   false, 0,0x0000ffff, false),
-  HOWTO(RELOC_BASE13, 0,  2,   13, false, 0, false, true,0,"BASE13",   false, 0,0x00001fff, false),
-  HOWTO(RELOC_BASE22, 0,  2,   0,  false, 0, false, true,0,"BASE22",   false, 0,0x00000000, false),
-  HOWTO(RELOC_PC10,   0,  2,   10, false, 0, false, true,0,"PC10",     false, 0,0x000003ff, false),
-  HOWTO(RELOC_PC22,   0,  2,   22, false, 0, false, true,0,"PC22",     false, 0,0x003fffff, false),
-  HOWTO(RELOC_JMP_TBL,0,  2,   32, false, 0, false, true,0,"JMP_TBL",  false, 0,0xffffffff, false),
-  HOWTO(RELOC_SEGOFF16,0, 2,   0,  false, 0, false, true,0,"SEGOFF16", false, 0,0x00000000, false),
-  HOWTO(RELOC_GLOB_DAT,0, 2,   0,  false, 0, false, true,0,"GLOB_DAT", false, 0,0x00000000, false),
-  HOWTO(RELOC_JMP_SLOT,0, 2,   0,  false, 0, false, true,0,"JMP_SLOT", false, 0,0x00000000, false),
-  HOWTO(RELOC_RELATIVE,0, 2,   0,  false, 0, false, true,0,"RELATIVE", false, 0,0x00000000, false),
-  HOWTO(RELOC_JUMPTARG,2, 13,  16, true,  0, false, true,0,"JUMPTARG", false, 0,0x0000ffff, false),
-  HOWTO(RELOC_CONST,   0, 13,  16, false, 0, false, true,0,"CONST",    false, 0,0x0000ffff, false),
-  HOWTO(RELOC_CONSTH, 16, 13,  16, false, 0, false, true,0,"CONSTH",   false, 0,0x0000ffff, false),
-};
-
-/* Convert standard reloc records to "arelent" format (incl byte swap).  */
-
-static  reloc_howto_type howto_table_std[] = {
-  /* type           rs   size bsz  pcrel bitpos  abs ovrf sf name    part_inpl   readmask  setmask  pcdone */
-HOWTO( 0,             0,  0,   8,  false, 0, true,  true,0,"8",        true, 0x000000ff,0x000000ff, false),
-HOWTO( 1,             0,  1,   16, false, 0, true,  true,0,"16",       true, 0x0000ffff,0x0000ffff, false),
-HOWTO( 2,             0,  2,   32, false, 0, true,  true,0,"32",       true, 0xffffffff,0xffffffff, false),
-HOWTO( 3,             0,  3,   64, false, 0, true,  true,0,"64",       true, 0xdeaddead,0xdeaddead, false),
-HOWTO( 4,             0,  0,   8,  true,  0, false, true,0,"DISP8",    true, 0x000000ff,0x000000ff, false),
-HOWTO( 5,             0,  1,   16, true,  0, false, true,0,"DISP16",   true, 0x0000ffff,0x0000ffff, false),
-HOWTO( 6,             0,  2,   32, true,  0, false, true,0,"DISP32",   true, 0xffffffff,0xffffffff, false),
-HOWTO( 7,             0,  3,   64, true,  0, false, true,0,"DISP64",   true, 0xfeedface,0xfeedface, false),
-};
-
-
-bfd_error_vector_type bfd_error_vector;
-
-void
-DEFUN(bfd_aout_swap_exec_header_in,(abfd, raw_bytes, execp),
-      bfd *abfd AND
-      unsigned char *raw_bytes AND
-      struct exec *execp)
-{
-  struct exec_bytes *bytes = (struct exec_bytes *)raw_bytes;
-
-  /* Now fill in fields in the execp, from the bytes in the raw data.  */
-  execp->a_info   = bfd_h_getlong (abfd, bytes->a_info);
-  execp->a_text   = bfd_h_getlong (abfd, bytes->a_text);
-  execp->a_data   = bfd_h_getlong (abfd, bytes->a_data);
-  execp->a_bss    = bfd_h_getlong (abfd, bytes->a_bss);
-  execp->a_syms   = bfd_h_getlong (abfd, bytes->a_syms);
-  execp->a_entry  = bfd_h_getlong (abfd, bytes->a_entry);
-  execp->a_trsize = bfd_h_getlong (abfd, bytes->a_trsize);
-  execp->a_drsize = bfd_h_getlong (abfd, bytes->a_drsize);
-}
-
-void
-DEFUN(bfd_aout_swap_exec_header_out,(abfd, execp, raw_bytes),
-     bfd *abfd AND
-     struct exec *execp AND 
-     unsigned char *raw_bytes)
-{
-  struct exec_bytes *bytes = (struct exec_bytes *)raw_bytes;
-
-  /* Now fill in fields in the raw data, from the fields in the exec struct. */
-  bfd_h_putlong (abfd, execp->a_info  , bytes->a_info);
-  bfd_h_putlong (abfd, execp->a_text  , bytes->a_text);
-  bfd_h_putlong (abfd, execp->a_data  , bytes->a_data);
-  bfd_h_putlong (abfd, execp->a_bss   , bytes->a_bss);
-  bfd_h_putlong (abfd, execp->a_syms  , bytes->a_syms);
-  bfd_h_putlong (abfd, execp->a_entry , bytes->a_entry);
-  bfd_h_putlong (abfd, execp->a_trsize, bytes->a_trsize);
-  bfd_h_putlong (abfd, execp->a_drsize, bytes->a_drsize);
-}
-
-/* Some A.OUT variant thinks that the file whose format we're checking
-   is an a.out file.  Do some more checking, and set up for access if
-   it really is.  Call back to the calling environment's "finish up"
-   function just before returning, to handle any last-minute setup.  */
-bfd_target *
-some_aout_object_p (abfd, callback_to_real_object_p)
-     bfd *abfd;
-     bfd_target *(*callback_to_real_object_p) ();
-{
-  unsigned char exec_bytes[EXEC_BYTES_SIZE];   /* Raw bytes of exec hdr */
-  struct exec *execp;
-  PTR rawptr;
-
-  if (bfd_seek (abfd, 0L, false) < 0) {
-    bfd_error = system_call_error;
-    return 0;
-  }
-
-  if (bfd_read ((PTR) exec_bytes, 1, EXEC_BYTES_SIZE, abfd)
-      != EXEC_BYTES_SIZE) {
-    bfd_error = wrong_format;
-    return 0;
-  }
-
-  /* Use an intermediate variable for clarity */
-  rawptr = (PTR) bfd_zalloc (abfd, sizeof (struct aoutdata) + sizeof (struct exec));
-
-  if (rawptr == NULL) {
-    bfd_error = no_memory;
-    return 0;
-  }
-
-  set_tdata (abfd, ((struct aoutdata *) rawptr));
-  exec_hdr (abfd) = execp =
-    (struct exec *) ((char *)rawptr + sizeof (struct aoutdata));
-
-  bfd_aout_swap_exec_header_in (abfd, exec_bytes, execp);
-
-  /* Set the file flags */
-  abfd->flags = NO_FLAGS;
-  if (execp->a_drsize || execp->a_trsize)
-    abfd->flags |= HAS_RELOC;
-  if (execp->a_entry) 
-    abfd->flags |= EXEC_P;
-  if (execp->a_syms) 
-    abfd->flags |= HAS_LINENO | HAS_DEBUG | HAS_SYMS | HAS_LOCALS;
-
-  if (N_MAGIC (*execp) == ZMAGIC) abfd->flags |= D_PAGED;
-  if (N_MAGIC (*execp) == NMAGIC) abfd->flags |= WP_TEXT;
-
-  bfd_get_start_address (abfd) = execp->a_entry;
-
-  obj_aout_symbols (abfd) = (aout_symbol_type *)NULL;
-  bfd_get_symcount (abfd) = execp->a_syms / sizeof (struct nlist);
-
-  /* Set the default architecture and machine type.  These can be
-     overridden in the callback routine.  */
-  abfd->obj_arch = bfd_arch_unknown;
-  abfd->obj_machine = 0;
-
-  /* The default relocation entry size is that of traditional V7 Unix.  */
-  obj_reloc_entry_size (abfd) = RELOC_STD_SIZE;
-
-  /* create the sections.  This is raunchy, but bfd_close wants to reclaim
-     them */
-  obj_textsec (abfd) = (asection *)NULL;
-  obj_datasec (abfd) = (asection *)NULL;
-  obj_bsssec (abfd) = (asection *)NULL;
-  (void)bfd_make_section(abfd, ".text");
-  (void)bfd_make_section(abfd, ".data");
-  (void)bfd_make_section(abfd, ".bss");
-
-  abfd->sections = obj_textsec (abfd);
-  obj_textsec (abfd)->next = obj_datasec (abfd);
-  obj_datasec (abfd)->next = obj_bsssec (abfd);
-
-  obj_datasec (abfd)->size = execp->a_data;
-  obj_bsssec (abfd)->size = execp->a_bss;
-  obj_textsec (abfd)->size = execp->a_text;
-
-  if (abfd->flags & D_PAGED) {
-    obj_textsec (abfd)->size -=  EXEC_BYTES_SIZE;
-  }
-    
-
-  obj_textsec (abfd)->flags = (execp->a_trsize != 0 ?
-                               (SEC_ALLOC | SEC_LOAD | SEC_RELOC | SEC_HAS_CONTENTS) :
-                               (SEC_ALLOC | SEC_LOAD | SEC_HAS_CONTENTS));
-  obj_datasec (abfd)->flags = (execp->a_drsize != 0 ?
-                               (SEC_ALLOC | SEC_LOAD | SEC_RELOC | SEC_HAS_CONTENTS) :
-                               (SEC_ALLOC | SEC_LOAD | SEC_HAS_CONTENTS));
-  obj_bsssec (abfd)->flags = SEC_ALLOC;
-
-#ifdef THIS_IS_ONLY_DOCUMENTATION
-  /* Call back to the format-dependent code to fill in the rest of the 
-     fields and do any further cleanup.  Things that should be filled
-     in by the callback:  */
-
-        struct exec *execp = exec_hdr (abfd);
-
-       /* The virtual memory addresses of the sections */
-       obj_datasec (abfd)->vma = N_DATADDR(*execp);
-       obj_bsssec (abfd)->vma = N_BSSADDR(*execp);
-       obj_textsec (abfd)->vma = N_TXTADDR(*execp);
-
-       /* The file offsets of the sections */
-       obj_textsec (abfd)->filepos = N_TXTOFF(*execp);
-       obj_datasec (abfd)->filepos = N_DATOFF(*execp);
-
-       /* The file offsets of the relocation info */
-       obj_textsec (abfd)->rel_filepos = N_TRELOFF(*execp);
-       obj_datasec (abfd)->rel_filepos = N_DRELOFF(*execp);
-
-       /* The file offsets of the string table and symbol table.  */
-       obj_str_filepos (abfd) = N_STROFF (*execp);
-       obj_sym_filepos (abfd) = N_SYMOFF (*execp);
-
-     /* This common code can't fill in those things because they depend
-     on either the start address of the text segment, the rounding
-     up of virtual addersses between segments, or the starting file 
-     position of the text segment -- all of which varies among different
-     versions of a.out.  */
-
-       /* Determine the architecture and machine type of the object file.  */
-       switch (N_MACHTYPE (*exec_hdr (abfd))) {
-       default:
-             abfd->obj_arch = bfd_arch_obscure;
-             break;
-       }
-
-       /* Determine the size of a relocation entry */
-       switch (abfd->obj_arch) {
-       case bfd_arch_sparc:
-       case bfd_arch_a29k:
-         obj_reloc_entry_size (abfd) = RELOC_EXT_SIZE;
-       default:
-         obj_reloc_entry_size (abfd) = RELOC_STD_SIZE;
-       }
-
-       return abfd->xvec;
-
-     /* The architecture is encoded in various ways in various a.out variants,
-     or is not encoded at all in some of them.  The relocation size depends
-     on the architecture and the a.out variant.  Finally, the return value
-     is the bfd_target vector in use.  If an error occurs, return zero and
-     set bfd_error to the appropriate error code.
-
-     Formats such as b.out, which have additional fields in the a.out
-     header, should cope with them in this callback as well.  */
-#endif /* DOCUMENTATION */
-
-
-  return (*callback_to_real_object_p)(abfd);
-}
-
-
-boolean
-aout_mkobject (abfd)
-     bfd *abfd;
-{
-  char *rawptr;
-
-  bfd_error = system_call_error;
-
-  /* Use an intermediate variable for clarity */
-  rawptr = bfd_zalloc (abfd, sizeof (struct aoutdata) + sizeof (struct exec));
-
-  if (rawptr == NULL) {
-    bfd_error = no_memory;
-    return false;
-  }
-
-  set_tdata (abfd, (struct aoutdata *) rawptr);
-  exec_hdr (abfd) = (struct exec *) (rawptr + sizeof (struct aoutdata));
-
-  /* For simplicity's sake we just make all the sections right here. */
-
-  obj_textsec (abfd) = (asection *)NULL;
-  obj_datasec (abfd) = (asection *)NULL;
-  obj_bsssec (abfd) = (asection *)NULL;
-  bfd_make_section (abfd, ".text");
-  bfd_make_section (abfd, ".data");
-  bfd_make_section (abfd, ".bss");
-
-  return true;
-}
-
-/* Keep track of machine architecture and machine type for a.out's.
-   Return the machine_type for a particular arch&machine, or M_UNKNOWN
-   if that exact arch&machine can't be represented in a.out format.
-
-   If the architecture is understood, machine type 0 (default) should
-   always be understood.  */
-
-enum machine_type
-aout_machine_type (arch, machine)
-     enum bfd_architecture arch;
-     unsigned long machine;
-{
-  enum machine_type arch_flags;
-
-  arch_flags = M_UNKNOWN;
-
-  switch (arch) {
-  case bfd_arch_sparc:
-    if (machine == 0)  arch_flags = M_SPARC;
-    break;
-
-  case bfd_arch_m68k:
-    switch (machine) {
-    case 0:            arch_flags = M_68010; break;
-    case 68000:                arch_flags = M_UNKNOWN; break;
-    case 68010:                arch_flags = M_68010; break;
-    case 68020:                arch_flags = M_68020; break;
-    default:           arch_flags = M_UNKNOWN; break;
-    }
-    break;
-
-  case bfd_arch_i386:
-    if (machine == 0)  arch_flags = M_386;
-    break;
-
-  case bfd_arch_a29k:
-    if (machine == 0)  arch_flags = M_29K;
-    break;
-
-  default:
-    arch_flags = M_UNKNOWN;
-    break;
-  }
-  return arch_flags;
-}
-
-boolean
-aout_set_arch_mach (abfd, arch, machine)
-     bfd *abfd;
-     enum bfd_architecture arch;
-     unsigned long machine;
-{
-  abfd->obj_arch = arch;
-  abfd->obj_machine = machine;
-  if (arch != bfd_arch_unknown &&
-      aout_machine_type (arch, machine) == M_UNKNOWN)
-    return false;              /* We can't represent this type */
-  return true;                 /* We're easy ... */
-}
-\f
-/* exec and core file sections */
-
-boolean
-aout_new_section_hook (abfd, newsect)
-     bfd *abfd;
-     asection *newsect;
-{
-  /* align to double at least */
-  newsect->alignment_power = 3;
-
-  if (bfd_get_format (abfd) == bfd_object) {
-    if (obj_textsec(abfd) == NULL && !strcmp(newsect->name, ".text")) {
-      obj_textsec(abfd)= newsect;
-      return true;
-    }
-
-    if (obj_datasec(abfd) == NULL && !strcmp(newsect->name, ".data")) {
-      obj_datasec(abfd) = newsect;
-      return true;
-    }
-
-    if (obj_bsssec(abfd) == NULL && !strcmp(newsect->name, ".bss")) {
-      obj_bsssec(abfd) = newsect;
-      return true;
-    }
-  }
-
-  /* We allow more than three sections internally */
-  return true;
-}
-
-boolean
-aout_set_section_contents (abfd, section, location, offset, count)
-     bfd *abfd;
-     sec_ptr section;
-     PTR location;
-     file_ptr offset;
-      int count;
-{
-  if (abfd->output_has_begun == false)
-      {                                /* set by bfd.c handler */
-       if ((obj_textsec (abfd) == NULL) || (obj_datasec (abfd) == NULL)) 
-           {
-             bfd_error = invalid_operation;
-             return false;
-           }
-
-       obj_textsec(abfd)->filepos = sizeof(struct exec);
-       obj_textsec(abfd)->size = align_power(obj_textsec(abfd)->size,
-                                             obj_textsec(abfd)->alignment_power);
-       obj_datasec(abfd)->filepos =  obj_textsec (abfd)->size + EXEC_BYTES_SIZE;
-       obj_datasec(abfd)->size = align_power(obj_datasec(abfd)->size,
-                                             obj_datasec(abfd)->alignment_power);
-
-
-      }
-  /* regardless, once we know what we're doing, we might as well get going */
-  if (section != obj_bsssec(abfd)) 
-      {
-       bfd_seek (abfd, section->filepos + offset, SEEK_SET);
-
-       if (count) {
-         return (bfd_write ((PTR)location, 1, count, abfd) == count) ?
-           true : false;
-       }
-       return false;
-      }
-  return true;
-}
-\f
-/* Classify stabs symbols */
-
-#define sym_in_text_section(sym) \
-     (((sym)->n_type  & (N_ABS | N_TEXT | N_DATA | N_BSS))== N_TEXT)
-
-#define sym_in_data_section(sym) \
-     (((sym)->n_type  & (N_ABS | N_TEXT | N_DATA | N_BSS))== N_DATA)
-
-#define sym_in_bss_section(sym) \
-     (((sym)->n_type  & (N_ABS | N_TEXT | N_DATA | N_BSS))== N_BSS)
-
-/* Symbol is undefined if type is N_UNDF|N_EXT and if it has
-   zero in the "value" field.  Nonzeroes there are fortrancommon
-   symbols.  */
-#define sym_is_undefined(sym) \
-        ((sym)->n_type == (N_UNDF | N_EXT) && (sym)->n_value == 0)
-
-/* Symbol is a global definition if N_EXT is on and if it has
-   a nonzero type field.  */
-#define sym_is_global_defn(sym) \
-        (((sym)->n_type & N_EXT) && (sym)->n_type & N_TYPE)
-
-/* Symbol is debugger info if any bits outside N_TYPE or N_EXT
-   are on.  */
-#define sym_is_debugger_info(sym) \
-        ((sym)->n_type & ~(N_EXT | N_TYPE))
-
-#define sym_is_fortrancommon(sym)       \
-        (((sym)->n_type == (N_EXT)) && (sym)->n_value != 0)
-
-/* Symbol is absolute if it has N_ABS set */
-#define sym_is_absolute(sym) \
-              (((sym)->n_type  & N_TYPE)== N_ABS)
-
-
-#define sym_is_indirect(sym) \
-              (((sym)->n_type  & N_ABS)== N_ABS)
-
-/* Only in their own functions for ease of debugging; when sym flags have
-   stabilised these should be inlined into their (single) caller */
-
-static void
-translate_from_native_sym_flags (sym_pointer, cache_ptr, abfd)
-     struct nlist *sym_pointer;
-     aout_symbol_type *cache_ptr;
-     bfd *abfd;
-{
-  switch (cache_ptr->type & N_TYPE) {
-  case N_SETA:
-  case N_SETT:
-  case N_SETD:
-  case N_SETB:
-    {
-      asection *section = bfd_make_section(abfd,
-                                          cache_ptr->symbol.name);
-      arelent_chain *reloc = (arelent_chain *)bfd_alloc(abfd, sizeof(arelent_chain));
-
-      switch ( (cache_ptr->type  & N_TYPE) ) {
-      case N_SETA:
-       reloc->relent.section =  (asection *)NULL;
-       cache_ptr->symbol.section = (asection *)NULL;
-       break;
-      case N_SETT:
-       reloc->relent.section = (asection *)obj_textsec(abfd);
-       cache_ptr->symbol.value -= reloc->relent.section->vma;
-       break;
-      case N_SETD:
-       reloc->relent.section = (asection *)obj_datasec(abfd);
-       cache_ptr->symbol.value -= reloc->relent.section->vma;
-       break;
-      case N_SETB:
-       reloc->relent.section = (asection *)obj_bsssec(abfd);
-       cache_ptr->symbol.value -= reloc->relent.section->vma;
-       break;
-      }
-      cache_ptr->symbol.section = reloc->relent.section;
-      reloc->relent.addend = cache_ptr->symbol.value ;
-
-      /* We modify the symbol to belong to a section depending upon the
-        name of the symbol - probably __CTOR__ or __DTOR__ but we don't
-        really care, and add to the size of the section to contain a
-        pointer to the symbol. Build a reloc entry to relocate to this
-        symbol attached to this section.  */
-
-      section->flags = SEC_CONSTRUCTOR;
-      section->reloc_count++;
-      section->alignment_power = 2;
-      reloc->relent.sym_ptr_ptr = (asymbol **)NULL;
-      reloc->next = section->constructor_chain;
-      section->constructor_chain = reloc;
-      reloc->relent.address = section->size;
-      section->size += sizeof(int *);
-
-      reloc->relent.howto = howto_table_ext +CTOR_TABLE_RELOC_IDX;
-      cache_ptr->symbol.flags |=  BSF_DEBUGGING ;
-      }
-    break;
-  default:
-
-    if (sym_is_debugger_info (sym_pointer)) {
-      cache_ptr->symbol.flags = BSF_DEBUGGING ;
-      /* Work out the section correct for this symbol */
-      switch (sym_pointer->n_type & N_TYPE) 
-       {
-       case N_TEXT:
-       case N_FN:
-         cache_ptr->symbol.section = obj_textsec (abfd);
-         cache_ptr->symbol.value -= obj_textsec(abfd)->vma;
-         break;
-       case N_DATA:
-         cache_ptr->symbol.value  -= obj_datasec(abfd)->vma;
-         cache_ptr->symbol.section = obj_datasec (abfd);
-         break;
-       case N_BSS :
-         cache_ptr->symbol.section = obj_bsssec (abfd);
-         cache_ptr->symbol.value -= obj_bsssec(abfd)->vma;
-         break;
-       case N_ABS:
-       default:
-         cache_ptr->symbol.section = 0;
-         break;
-       }
-    }
-    else {
-      if (sym_is_fortrancommon (sym_pointer))
-       {
-         cache_ptr->symbol.flags = BSF_FORT_COMM;
-         cache_ptr->symbol.section = (asection *)NULL;
-       }
-      else {
-       if (sym_is_undefined (sym_pointer)) {
-         cache_ptr->symbol.flags = BSF_UNDEFINED;
-       }
-       else if (sym_is_global_defn (sym_pointer)) {
-         cache_ptr->symbol.flags = BSF_GLOBAL | BSF_EXPORT;
-       }
-
-       else if (sym_is_absolute (sym_pointer)) {
-         cache_ptr->symbol.flags = BSF_ABSOLUTE;
-       }
-       else {
-         cache_ptr->symbol.flags = BSF_LOCAL;
-       }
-
-       /* In a.out, the value of a symbol is always relative to the 
-        * start of the file, if this is a data symbol we'll subtract
-        * the size of the text section to get the section relative
-        * value. If this is a bss symbol (which would be strange)
-        * we'll subtract the size of the previous two sections
-        * to find the section relative address.
-        */
-
-       if (sym_in_text_section (sym_pointer))   {
-         cache_ptr->symbol.value -= obj_textsec(abfd)->vma;
-         cache_ptr->symbol.section = obj_textsec (abfd);
-       }
-       else if (sym_in_data_section (sym_pointer)){
-         cache_ptr->symbol.value -= obj_datasec(abfd)->vma;
-         cache_ptr->symbol.section = obj_datasec (abfd);
-       }
-       else if (sym_in_bss_section(sym_pointer)) {
-         cache_ptr->symbol.section = obj_bsssec (abfd);
-         cache_ptr->symbol.value -= obj_bsssec(abfd)->vma;
-       }
-       else {
-         cache_ptr->symbol.section = (asection *)NULL;
-         cache_ptr->symbol.flags |= BSF_ABSOLUTE;
-       }
-      }
-    }
-  }
-}
-
-void
-translate_to_native_sym_flags (sym_pointer, cache_ptr_g, abfd)
-     struct nlist *sym_pointer;
-     PTR cache_ptr_g;
-     bfd *abfd;
-{
-  asymbol *cache_ptr = (asymbol *)cache_ptr_g;
-
-  /* FIXME check for writing bss */
-  if (bfd_get_section(cache_ptr)) {
-    if (bfd_get_output_section(cache_ptr) == obj_bsssec (abfd)) {
-      sym_pointer->n_type |= N_BSS;
-    }
-    else if (bfd_get_output_section(cache_ptr) == obj_datasec (abfd)) {
-      sym_pointer->n_type |= N_DATA;
-    }
-    else  if (bfd_get_output_section(cache_ptr) == obj_textsec (abfd)) {
-      sym_pointer->n_type |= N_TEXT;
-    }
-    else {
-      bfd_error_vector.nonrepresentable_section(abfd,
-                                bfd_get_output_section(cache_ptr)->name);
-    }
-    /* Turn the symbol from section relative to absolute again */
-    sym_pointer->n_value +=
-      cache_ptr->section->output_section->vma 
-       + cache_ptr->section->output_offset ;
-  }
-  else {
-    sym_pointer->n_type |= N_ABS;
-  }
-
-  if (cache_ptr->flags & (BSF_FORT_COMM | BSF_UNDEFINED)) {
-    sym_pointer->n_type = (N_UNDF | N_EXT);
-    return;
-  }
-
-  if (cache_ptr->flags & BSF_ABSOLUTE) {
-    sym_pointer->n_type |= N_ABS;
-  }
-
-  if (cache_ptr->flags & (BSF_GLOBAL | BSF_EXPORT)) {
-    sym_pointer->n_type |= N_EXT;
-  }
-  if (cache_ptr->flags & BSF_DEBUGGING) {
-    sym_pointer->n_type = ((aout_symbol_type *)cache_ptr)->type;
-  }
-}
-\f
-/* Native-level interface to symbols. */
-
-/* We read the symbols into a buffer, which is discarded when this
-   function exits.  We read the strings into a buffer large enough to
-   hold them all plus all the cached symbol entries. */
-
-asymbol *
-aout_make_empty_symbol (abfd)
-bfd *abfd;
-{
-  aout_symbol_type  *new =
-    (aout_symbol_type *)bfd_zalloc (abfd, sizeof (aout_symbol_type));
-  new->symbol.the_bfd = abfd;
-
-  return &new->symbol;
-}
-
-boolean
-DEFUN(aout_slurp_symbol_table, (abfd),
-      bfd *abfd)
-{
-  size_t symbol_size;
-  size_t string_size;
-  unsigned char string_chars[LONG_SIZE];
-  struct nlist *syms;
-  char *strings;
-  aout_symbol_type *cached;
-
-  /* If there's no work to be done, don't do any */
-  if (obj_aout_symbols (abfd) != (aout_symbol_type *)NULL) return true;
-  symbol_size = exec_hdr(abfd)->a_syms;
-  if (symbol_size == 0) {
-    bfd_error = no_symbols;
-    return false;
-  }
-
-  bfd_seek (abfd, obj_str_filepos (abfd), SEEK_SET);
-  if (bfd_read ((PTR)string_chars, LONG_SIZE, 1, abfd) != LONG_SIZE)
-    return false;
-  string_size = bfd_h_getlong (abfd, string_chars);
-
-  strings = bfd_alloc(abfd, string_size + 1);
-  cached = (aout_symbol_type *)
-          bfd_zalloc(abfd, bfd_get_symcount (abfd) * sizeof(aout_symbol_type));
-  /* Alloc this last, so we can free it if obstack is in use.  */
-  syms = (struct nlist *) bfd_alloc(abfd, symbol_size);
-
-  bfd_seek (abfd, obj_sym_filepos (abfd), SEEK_SET);
-  if (bfd_read ((PTR)syms, 1, symbol_size, abfd) != symbol_size) {
-  bailout:
-    if (syms)  bfd_release (abfd, syms);
-    if (cached)        bfd_release (abfd, cached);
-    if (strings)bfd_release (abfd, strings);
-    return false;
-  }
-
-  bfd_seek (abfd, obj_str_filepos (abfd), SEEK_SET);
-  if (bfd_read ((PTR)strings, 1, string_size, abfd) != string_size) {
-    goto bailout;
-  }
-
-  /* OK, now walk the new symtable, cacheing symbol properties */
-    {
-      register struct nlist *sym_pointer;
-      register struct nlist *sym_end = syms + bfd_get_symcount (abfd);
-      register aout_symbol_type *cache_ptr = cached;
-
-      /* run through the table and byte swap if needed */
-      for (sym_pointer = syms; sym_pointer < sym_end;  sym_pointer++) {
-        sym_pointer->n_un.n_strx =
-         bfd_h_getlong (abfd, &sym_pointer->n_un.n_strx);
-        sym_pointer->n_desc =
-         bfd_h_getshort (abfd, &sym_pointer->n_desc);
-        sym_pointer->n_value =
-         bfd_h_getlong (abfd, &sym_pointer->n_value);
-       sym_pointer->n_other = (char)
-         bfd_h_getchar(abfd, &sym_pointer->n_other);
-       sym_pointer->n_type = (char)
-         bfd_h_getchar(abfd, &sym_pointer->n_type);
-      }
-
-      /* Run through table and copy values */
-      for (sym_pointer = syms, cache_ptr = cached;
-          sym_pointer < sym_end; sym_pointer++, cache_ptr++) 
-         {
-           cache_ptr->symbol.the_bfd = abfd;
-           if (sym_pointer->n_un.n_strx)
-             cache_ptr->symbol.name = sym_pointer->n_un.n_strx + strings;
-           else
-             cache_ptr->symbol.name = (char *)NULL;
-           cache_ptr->symbol.value = sym_pointer->n_value;
-           cache_ptr->desc = sym_pointer->n_desc;
-           cache_ptr->other = sym_pointer->n_other;
-           cache_ptr->type = sym_pointer->n_type;
-           cache_ptr->symbol.udata = 0;
-           translate_from_native_sym_flags (sym_pointer, cache_ptr, abfd);
-
-         }
-    }
-
-  obj_aout_symbols (abfd) =  cached;
-  bfd_release (abfd, (PTR)syms);
-
-  return true;
-}
-
-
-void
-DEFUN(aout_write_syms,(abfd),
-     bfd *abfd)
-{
-  unsigned int count ;
-  asymbol **generic = bfd_get_outsymbols (abfd);
-
-  unsigned int stindex = sizeof(stindex); /* initial string length */
-
-  for (count = 0; count < bfd_get_symcount (abfd); count++) {
-    asymbol *g = generic[count];
-    struct nlist nsp;
-
-    if (g->name) {
-      unsigned int length = strlen(g->name) +1;
-      bfd_h_putlong  (abfd, stindex, (unsigned char *)&nsp.n_un.n_strx);
-      stindex += length;
-    }
-    else {
-      bfd_h_putlong  (abfd, 0, (unsigned char *)&nsp.n_un.n_strx);
-    }
-
-    if (g->the_bfd->xvec->flavour == abfd->xvec->flavour) 
-      {
-       nsp.n_desc = aout_symbol( g)->desc;
-       nsp.n_other = aout_symbol(g)->other;
-       nsp.n_type = aout_symbol(g)->type;
-      }
-    else
-      {
-       nsp.n_desc = 0;
-       nsp.n_other = 0;
-       nsp.n_type = 0;
-      }
-
-
-    nsp.n_value = g->value;
-    translate_to_native_sym_flags (&nsp, (PTR)g, abfd);
-
-
-    bfd_h_putshort (abfd, nsp.n_desc, (unsigned char *)&nsp.n_desc);
-    bfd_h_putlong  (abfd, nsp.n_value, (unsigned char *)&nsp.n_value);
-    bfd_write((PTR)&nsp,1, sizeof(nsp), abfd);
-  }
-
-
-  /* Now output the strings.  Be sure to put string length into correct
-   * byte ordering before writing it.
-   */
-  bfd_h_putlong  (abfd, stindex, (unsigned char *)&stindex);
-
-  bfd_write((PTR)&stindex, 1, sizeof(stindex), abfd);
-  
-  generic = bfd_get_outsymbols(abfd);
-  for (count = 0; count < bfd_get_symcount(abfd); count++) 
-    {
-      asymbol *g = *(generic++);
-
-      if (g->name)
-       {
-         size_t length = strlen(g->name)+1;
-         bfd_write((PTR)g->name, 1, length, abfd);
-       }
-      if ((g->flags & BSF_FAKE)==0) {
-       g->name = itos(count);  /* smash the generic symbol */
-      }
-    }
-}
-
-
-void
-DEFUN(aout_reclaim_symbol_table,(abfd),
-     bfd *abfd)
-{
-
-}
-\f
-unsigned int
-aout_get_symtab_upper_bound (abfd)
-     bfd *abfd;
-{
-  if (!aout_slurp_symbol_table (abfd)) return 0;
-
-  return (bfd_get_symcount (abfd)+1) * (sizeof (aout_symbol_type *));
-}
-
-unsigned int
-aout_get_symtab (abfd, location)
-     bfd *abfd;
-     asymbol **location;
-{
-  unsigned int counter = 0;
-  aout_symbol_type *symbase;
-
-  if (!aout_slurp_symbol_table (abfd)) return 0;
-
-  for (symbase = obj_aout_symbols(abfd); counter++ < bfd_get_symcount (abfd);)
-    *(location++) = (asymbol *)( symbase++);
-  *location++ =0;
-  return bfd_get_symcount(abfd);
-}
-
-\f
-/* Standard reloc stuff */
-/* Output standard relocation information to a file in target byte order. */
-
-void
-swap_std_reloc_out (abfd, g, natptr)
-     bfd *abfd;
-     arelent *g;               /* Generic relocation struct */
-     struct reloc_std_bytes *natptr;
-{
-  int r_index;
-  int r_extern;
-  unsigned int r_length;
-  int r_pcrel;
-  int r_baserel, r_jmptable, r_relative;
-  unsigned int r_addend;
-
-  bfd_h_putlong (abfd, g->address, natptr->r_address);
-
-  r_length = g->howto->size ; /* Size as a power of two */
-  r_pcrel  = (int) g->howto->pc_relative;      /* Relative to PC? */
-  /* r_baserel, r_jmptable, r_relative???  FIXME-soon */
-  r_baserel = 0;
-  r_jmptable = 0;
-  r_relative = 0;
-
-  r_addend = g->addend;        /* Start here, see how it goes */
-
-  /* name was clobbered by aout_write_syms to be symbol index */
-
-  if (g->sym_ptr_ptr != NULL) 
-    {
-      if ((*(g->sym_ptr_ptr))->section) {
-       /* put the section offset into the addend for output */
-       r_addend += (*(g->sym_ptr_ptr))->section->vma;
-      }
-
-      r_index = stoi((*(g->sym_ptr_ptr))->name);
-      r_extern = 1;
-    }
-  else {
-    r_extern = 0;
-    if (g->section == NULL) {
-      /* It is possible to have a reloc with nothing, we generate an
-        abs + 0 */
-      r_addend = 0;
-      r_index = N_ABS | N_EXT;
-    }
-    else  if(g->section->output_section == obj_textsec(abfd)) {
-      r_index = N_TEXT | N_EXT;
-      r_addend += g->section->output_section->vma;
-    }
-    else if (g->section->output_section == obj_datasec(abfd)) {
-      r_index = N_DATA | N_EXT;
-      r_addend += g->section->output_section->vma;
-    }
-    else if (g->section->output_section == obj_bsssec(abfd)) {
-      r_index = N_BSS | N_EXT ;
-      r_addend += g->section->output_section->vma;
-    }
-    else {
-      BFD_ASSERT(0);
-    }
-  }
-
-  /* now the fun stuff */
-  if (abfd->xvec->header_byteorder_big_p != false) {
-    natptr->r_index[0] = r_index >> 16;
-    natptr->r_index[1] = r_index >> 8;
-    natptr->r_index[2] = r_index;
-    natptr->r_bits[0] =
-      (r_extern?    RELOC_STD_BITS_EXTERN_BIG: 0)
-       | (r_pcrel?     RELOC_STD_BITS_PCREL_BIG: 0)
-         | (r_baserel?   RELOC_STD_BITS_BASEREL_BIG: 0)
-           | (r_jmptable?  RELOC_STD_BITS_JMPTABLE_BIG: 0)
-             | (r_relative?  RELOC_STD_BITS_RELATIVE_BIG: 0)
-               | (r_length <<  RELOC_STD_BITS_LENGTH_SH_BIG);
-  } else {
-    natptr->r_index[2] = r_index >> 16;
-    natptr->r_index[1] = r_index >> 8;
-    natptr->r_index[0] = r_index;
-    natptr->r_bits[0] =
-      (r_extern?    RELOC_STD_BITS_EXTERN_LITTLE: 0)
-       | (r_pcrel?     RELOC_STD_BITS_PCREL_LITTLE: 0)
-         | (r_baserel?   RELOC_STD_BITS_BASEREL_LITTLE: 0)
-           | (r_jmptable?  RELOC_STD_BITS_JMPTABLE_LITTLE: 0)
-             | (r_relative?  RELOC_STD_BITS_RELATIVE_LITTLE: 0)
-               | (r_length <<  RELOC_STD_BITS_LENGTH_SH_LITTLE);
-  }
-}
-
-
-/* Extended stuff */
-/* Output extended relocation information to a file in target byte order. */
-
-void
-swap_ext_reloc_out (abfd, g, natptr)
-     bfd *abfd;
-     arelent *g;               /* Generic relocation struct */
-     register struct reloc_ext_bytes *natptr;
-{
-  int r_index;
-  int r_extern;
-  unsigned int r_type;
-  unsigned int r_addend;
-
-  bfd_h_putlong (abfd, g->address, natptr->r_address);
-
-  /* Find a type in the output format which matches the input howto - 
-     at the moment we assume input format == output format FIXME!! */
-  r_type = (enum reloc_type) g->howto->type;
-
-  r_addend = g->addend;        /* Start here, see how it goes */
-
-  /* name was clobbered by aout_write_syms to be symbol index*/
-
-  if (g->sym_ptr_ptr != NULL) 
-    {
-      if ((*(g->sym_ptr_ptr))->section) {
-       /* put the section offset into the addend for output */
-       r_addend += (*(g->sym_ptr_ptr))->section->vma;
-      }
-
-      r_index = stoi((*(g->sym_ptr_ptr))->name);
-      r_extern = 1;
-    }
-  else {
-    r_extern = 0;
-    if (g->section == NULL) {
-      BFD_ASSERT(0);
-      r_index = N_ABS | N_EXT;
-    }
-    else  if(g->section->output_section == obj_textsec(abfd)) {
-      r_index = N_TEXT | N_EXT;
-      r_addend += g->section->output_section->vma;
-    }
-    else if (g->section->output_section == obj_datasec(abfd)) {
-      r_index = N_DATA | N_EXT;
-      r_addend += g->section->output_section->vma;
-    }
-    else if (g->section->output_section == obj_bsssec(abfd)) {
-      r_index = N_BSS | N_EXT ;
-      r_addend += g->section->output_section->vma;
-    }
-    else {
-      BFD_ASSERT(0);
-    }
-  }
-
-  /* now the fun stuff */
-  if (abfd->xvec->header_byteorder_big_p != false) {
-    natptr->r_index[0] = r_index >> 16;
-    natptr->r_index[1] = r_index >> 8;
-    natptr->r_index[2] = r_index;
-    natptr->r_bits[0] =
-      (r_extern? RELOC_EXT_BITS_EXTERN_BIG: 0)
-       | (r_type << RELOC_EXT_BITS_TYPE_SH_BIG);
-  } else {
-    natptr->r_index[2] = r_index >> 16;
-    natptr->r_index[1] = r_index >> 8;
-    natptr->r_index[0] = r_index;
-    natptr->r_bits[0] =
-      (r_extern? RELOC_EXT_BITS_EXTERN_LITTLE: 0)
-       | (r_type << RELOC_EXT_BITS_TYPE_SH_LITTLE);
-  }
-
-  bfd_h_putlong (abfd, r_addend, natptr->r_addend);
-}
-
-#define MOVE_ADDRESS(ad)                                                       \
-  if (r_extern) {                                                      \
-    cache_ptr->sym_ptr_ptr = symbols + r_index;                                \
-    cache_ptr->section = (asection *)NULL;                             \
-      cache_ptr->addend = ad;                                          \
-  } else {                                                             \
-    cache_ptr->sym_ptr_ptr = (asymbol **)NULL;                         \
-    switch (r_index) {                                                 \
-    case N_TEXT:                                                       \
-    case N_TEXT | N_EXT:                                               \
-      cache_ptr->section = obj_textsec(abfd);                          \
-      cache_ptr->addend = ad  - su->textsec->vma;                      \
-      break;                                                           \
-    case N_DATA:                                                       \
-    case N_DATA | N_EXT:                                               \
-      cache_ptr->section = obj_datasec(abfd);                          \
-      cache_ptr->addend = ad - su->datasec->vma;                       \
-      break;                                                           \
-    case N_BSS:                                                                \
-    case N_BSS | N_EXT:                                                        \
-      cache_ptr->section = obj_bsssec(abfd);                           \
-      cache_ptr->addend = ad - su->bsssec->vma;                                \
-      break;                                                           \
-    case N_ABS:                                                                \
-    case N_ABS | N_EXT:                                                        \
-      cache_ptr->section = NULL;       /* No section */                \
-      cache_ptr->addend = ad;          /* FIXME, is this right? */     \
-      BFD_ASSERT(1);                                                   \
-      break;                                                           \
-    default:                                                           \
-      cache_ptr->section = NULL;       /* No section */                \
-      cache_ptr->addend = ad;          /* FIXME, is this right? */     \
-      BFD_ASSERT(1);                                                   \
-      break;                                                           \
-    }                                                                  \
-  }                                                                    \
-
-void
-swap_ext_reloc_in (abfd, bytes, cache_ptr, symbols)
-     bfd *abfd;
-     struct reloc_ext_bytes *bytes;
-     arelent *cache_ptr;
-     asymbol **symbols;
-{
-  int r_index;
-  int r_extern;
-  unsigned int r_type;
-  struct aoutdata *su = (struct aoutdata *)(abfd->tdata);
-
-  cache_ptr->address = bfd_h_getlong (abfd, bytes->r_address);
-
-  /* now the fun stuff */
-  if (abfd->xvec->header_byteorder_big_p != false) {
-    r_index =  (bytes->r_index[0] << 16)
-            | (bytes->r_index[1] << 8)
-            |  bytes->r_index[2];
-    r_extern = (0 != (bytes->r_bits[0] & RELOC_EXT_BITS_EXTERN_BIG));
-    r_type   =       (bytes->r_bits[0] & RELOC_EXT_BITS_TYPE_BIG)
-                                     >> RELOC_EXT_BITS_TYPE_SH_BIG;
-  } else {
-    r_index =  (bytes->r_index[2] << 16)
-            | (bytes->r_index[1] << 8)
-            |  bytes->r_index[0];
-    r_extern = (0 != (bytes->r_bits[0] & RELOC_EXT_BITS_EXTERN_LITTLE));
-    r_type   =       (bytes->r_bits[0] & RELOC_EXT_BITS_TYPE_LITTLE)
-                                     >> RELOC_EXT_BITS_TYPE_SH_LITTLE;
-  }
-
-  cache_ptr->howto =  howto_table_ext + r_type;
-  MOVE_ADDRESS(bfd_h_getlong(abfd,bytes->r_addend));
-}
-
-void
-swap_std_reloc_in (abfd, bytes, cache_ptr, symbols)
-     bfd *abfd;
-     struct reloc_std_bytes *bytes;
-     arelent *cache_ptr;
-     asymbol **symbols;
-{
-  int r_index;
-  int r_extern;
-  unsigned int r_length;
-  int r_pcrel;
-  int r_baserel, r_jmptable, r_relative;
-  struct aoutdata *su = (struct aoutdata *)(abfd->tdata);
-
-  cache_ptr->address = bfd_h_getlong (abfd, bytes->r_address);
-
-  /* now the fun stuff */
-  if (abfd->xvec->header_byteorder_big_p != false) {
-    r_index =  (bytes->r_index[0] << 16)
-      | (bytes->r_index[1] << 8)
-       |  bytes->r_index[2];
-    r_extern  = (0 != (bytes->r_bits[0] & RELOC_STD_BITS_EXTERN_BIG));
-    r_pcrel   = (0 != (bytes->r_bits[0] & RELOC_STD_BITS_PCREL_BIG));
-    r_baserel = (0 != (bytes->r_bits[0] & RELOC_STD_BITS_BASEREL_BIG));
-    r_jmptable= (0 != (bytes->r_bits[0] & RELOC_STD_BITS_JMPTABLE_BIG));
-    r_relative= (0 != (bytes->r_bits[0] & RELOC_STD_BITS_RELATIVE_BIG));
-    r_length  =       (bytes->r_bits[0] & RELOC_STD_BITS_LENGTH_BIG) 
-                       >> RELOC_STD_BITS_LENGTH_SH_BIG;
-  } else {
-    r_index =  (bytes->r_index[2] << 16)
-      | (bytes->r_index[1] << 8)
-       |  bytes->r_index[0];
-    r_extern  = (0 != (bytes->r_bits[0] & RELOC_STD_BITS_EXTERN_LITTLE));
-    r_pcrel   = (0 != (bytes->r_bits[0] & RELOC_STD_BITS_PCREL_LITTLE));
-    r_baserel = (0 != (bytes->r_bits[0] & RELOC_STD_BITS_BASEREL_LITTLE));
-    r_jmptable= (0 != (bytes->r_bits[0] & RELOC_STD_BITS_JMPTABLE_LITTLE));
-    r_relative= (0 != (bytes->r_bits[0] & RELOC_STD_BITS_RELATIVE_LITTLE));
-    r_length  =       (bytes->r_bits[0] & RELOC_STD_BITS_LENGTH_LITTLE) 
-                       >> RELOC_STD_BITS_LENGTH_SH_LITTLE;
-  }
-
-  cache_ptr->howto =  howto_table_std + r_length + 4 * r_pcrel;
-  /* FIXME-soon:  Roll baserel, jmptable, relative bits into howto setting */
-
-  MOVE_ADDRESS(0);
-}
-
-/* Reloc hackery */
-
-boolean
-aout_slurp_reloc_table (abfd, asect, symbols)
-     bfd *abfd;
-     sec_ptr asect;
-     asymbol **symbols;
-{
-  unsigned int count;
-  size_t reloc_size;
-  PTR relocs;
-  arelent *reloc_cache;
-  size_t each_size;
-
-  if (asect->relocation) return true;
-
-  if (asect->flags & SEC_CONSTRUCTOR) return true;
-
-  if (asect == obj_datasec (abfd)) {
-    reloc_size = exec_hdr(abfd)->a_drsize;
-    goto doit;
-  }
-
-  if (asect == obj_textsec (abfd)) {
-    reloc_size = exec_hdr(abfd)->a_trsize;
-    goto doit;
-  }
-
-  bfd_error = invalid_operation;
-  return false;
-
- doit:
-  bfd_seek (abfd, asect->rel_filepos, SEEK_SET);
-  each_size = obj_reloc_entry_size (abfd);
-
-  count = reloc_size / each_size;
-
-
-  reloc_cache = (arelent *) bfd_zalloc (abfd, (size_t)(count * sizeof
-                                                      (arelent)));
-  if (!reloc_cache) {
-nomem:
-    bfd_error = no_memory;
-    return false;
-  }
-
-  relocs =  bfd_alloc (abfd, reloc_size);
-  if (!relocs) {
-    bfd_release (abfd, reloc_cache);
-    goto nomem;
-  }
-
-  if (bfd_read (relocs, 1, reloc_size, abfd) != reloc_size) {
-    bfd_release (abfd, relocs);
-    bfd_release (abfd, reloc_cache);
-    bfd_error = system_call_error;
-    return false;
-  }
-
-  if (each_size == RELOC_EXT_SIZE) {
-    register struct reloc_ext_bytes *rptr = (struct reloc_ext_bytes *) relocs;
-    unsigned int counter = 0;
-    arelent *cache_ptr = reloc_cache;
-
-    for (; counter < count; counter++, rptr++, cache_ptr++) {
-      swap_ext_reloc_in(abfd, rptr, cache_ptr, symbols);
-    }
-  } else {
-    register struct reloc_std_bytes *rptr = (struct reloc_std_bytes *) relocs;
-    unsigned int counter = 0;
-    arelent *cache_ptr = reloc_cache;
-
-    for (; counter < count; counter++, rptr++, cache_ptr++) {
-       swap_std_reloc_in(abfd, rptr, cache_ptr, symbols);
-    }
-
-  }
-
-  bfd_release (abfd,relocs);
-  asect->relocation = reloc_cache;
-  asect->reloc_count = count;
-  return true;
-}
-
-
-
-/* Write out a relocation section into an object file.  */
-
-boolean
-aout_squirt_out_relocs (abfd, section)
-     bfd *abfd;
-     asection *section;
-{
-  arelent **generic;
-  unsigned char *native, *natptr;
-  size_t each_size;
-
-  unsigned int count = section->reloc_count;
-  size_t natsize;
-
-  if (count == 0) return true;
-
-  each_size = obj_reloc_entry_size (abfd);
-  natsize = each_size * count;
-  native = (unsigned char *) bfd_zalloc (abfd, natsize);
-  if (!native) {
-    bfd_error = no_memory;
-    return false;
-  }
-
-  generic = section->orelocation;
-
-  if (each_size == RELOC_EXT_SIZE) 
-    {
-      for (natptr = native;
-          count != 0;
-          --count, natptr += each_size, ++generic)
-       swap_ext_reloc_out (abfd, *generic, (struct reloc_ext_bytes *)natptr);
-    }
-  else 
-    {
-      for (natptr = native;
-          count != 0;
-          --count, natptr += each_size, ++generic)
-       swap_std_reloc_out(abfd, *generic, (struct reloc_std_bytes *)natptr);
-    }
-
-  if ( bfd_write ((PTR) native, 1, natsize, abfd) != natsize) {
-    bfd_release(abfd, native);
-    return false;
-  }
-  bfd_release (abfd, native);
-
-  return true;
-}
-
-/* This is stupid.  This function should be a boolean predicate */
-unsigned int
-aout_canonicalize_reloc (abfd, section, relptr, symbols)
-     bfd *abfd;
-     sec_ptr section;
-     arelent **relptr;
-     asymbol **symbols;
-{
-  arelent *tblptr = section->relocation;
-  unsigned int count;
-
-  if (!(tblptr || aout_slurp_reloc_table (abfd, section, symbols)))
-    return 0;
-
-  if (section->flags & SEC_CONSTRUCTOR) {
-    arelent_chain *chain = section->constructor_chain;
-    for (count = 0; count < section->reloc_count; count ++) {
-      *relptr ++ = &chain->relent;
-      chain = chain->next;
-    }
-  }
-  else {
-    tblptr = section->relocation;
-    if (!tblptr) return 0;
-
-    for (count = 0; count++ < section->reloc_count;) 
-      {
-       *relptr++ = tblptr++;
-      }
-  }
-  *relptr = 0;
-
-  return section->reloc_count;
-}
-
-unsigned int
-aout_get_reloc_upper_bound (abfd, asect)
-     bfd *abfd;
-     sec_ptr asect;
-{
-  if (bfd_get_format (abfd) != bfd_object) {
-    bfd_error = invalid_operation;
-    return 0;
-  }
-  if (asect->flags & SEC_CONSTRUCTOR) {
-    return (sizeof (arelent *) * (asect->reloc_count+1));
-  }
-
-
-  if (asect == obj_datasec (abfd))
-    return (sizeof (arelent *) *
-            ((exec_hdr(abfd)->a_drsize / obj_reloc_entry_size (abfd))
-             +1));
-
-  if (asect == obj_textsec (abfd))
-    return (sizeof (arelent *) *
-            ((exec_hdr(abfd)->a_trsize / obj_reloc_entry_size (abfd))
-             +1));
-
-  bfd_error = invalid_operation;
-  return 0;
-}
-
-void
-aout_reclaim_reloc (ignore_abfd, ignore)
-     bfd *ignore_abfd;
-     sec_ptr ignore;
-{
-
-}
-\f
-
-alent *
-aout_get_lineno(ignore_abfd, ignore_symbol)
-bfd *ignore_abfd;
-asymbol *ignore_symbol;
-{
-return (alent *)NULL;
-}
-
-void 
-aout_print_symbol(ignore_abfd, afile, symbol, how)
-bfd *ignore_abfd;
-PTR afile;
-asymbol *symbol;
-bfd_print_symbol_enum_type how;
-{
-  FILE *file = (FILE *)afile;
-
-  switch (how) {
-  case bfd_print_symbol_name_enum:
-    fprintf(file,"%s", symbol->name);
-    break;
-  case bfd_print_symbol_type_enum:
-    fprintf(file,"%4x %2x %2x",(unsigned)(aout_symbol(symbol)->desc & 0xffff),
-           (unsigned)(aout_symbol(symbol)->other & 0xff),
-           (unsigned)(aout_symbol(symbol)->type));
-    break;
-  case bfd_print_symbol_all_enum:
-    {
-   CONST char *section_name = symbol->section == (asection *)NULL ?
-       "*abs" : symbol->section->name;
-
-      bfd_print_symbol_vandf((PTR)file,symbol);
-
-      fprintf(file," %-5s %04x %02x %02x %s",
-             section_name,
-             (unsigned)(aout_symbol(symbol)->desc & 0xffff),
-             (unsigned)(aout_symbol(symbol)->other & 0xff),
-             (unsigned)(aout_symbol(symbol)->type  & 0xff),
-             symbol->name);
-    }
-    break;
-  }
-}
-
-/* 
- provided a bfd, a section and an offset into the section, calculate
- and return the name of the source file and the line nearest to the
- wanted location.
-*/
-boolean
-DEFUN(aout_find_nearest_line,(abfd,
-                               section,
-                               symbols,
-                               offset,
-                               filename_ptr,
-                               functionname_ptr,
-                               line_ptr),
-      bfd *abfd AND
-      asection *section AND
-      asymbol **symbols AND
-      bfd_vma offset AND
-      CONST char **filename_ptr AND
-      CONST char **functionname_ptr AND
-      unsigned int *line_ptr)
-{
-  /* Run down the file looking for the filename, function and linenumber */
-  asymbol **p;
-  static  char buffer[100];
-  bfd_vma high_line_vma = ~0;
-  bfd_vma low_func_vma = 0;
-  asymbol *func = 0;
-  *filename_ptr = abfd->filename;
-  *functionname_ptr = 0;
-  *line_ptr = 0;
-  if (symbols != (asymbol **)NULL) {
-    for (p = symbols; *p; p++) {
-      aout_symbol_type  *q = (aout_symbol_type *)(*p);
-      switch (q->type){
-      case N_SO:
-       *filename_ptr = q->symbol.name;
-       if (obj_textsec(abfd) != section) {
-         return true;
-       }
-       break;
-      case N_SLINE:
-
-      case N_DSLINE:
-      case N_BSLINE:
-       /* We'll keep this if it resolves nearer than the one we have already */
-       if (q->symbol.value >= offset &&
-           q->symbol.value < high_line_vma) {
-         *line_ptr = q->desc;
-         high_line_vma = q->symbol.value;
-       }
-       break;
-      case N_FUN:
-       {
-         /* We'll keep this if it is nearer than the one we have already */
-         if (q->symbol.value >= low_func_vma &&
-             q->symbol.value <= offset) {
-           low_func_vma = q->symbol.value;
-           func = (asymbol *)q;
-         }
-         if (*line_ptr && func) {
-           CONST char *function = func->name;
-           char *p;
-           strncpy(buffer, function, sizeof(buffer)-1);
-           buffer[sizeof(buffer)-1] = 0;
-           /* Have to remove : stuff */
-           p = strchr(buffer,':');
-           if (p != NULL) {*p = NULL; }
-           *functionname_ptr = buffer;
-           return true;
-
-         }
-       }
-       break;
-      }
-    }
-  }
-  
-  return true;
-
-}
-
-int 
-DEFUN(aout_sizeof_headers,(ignore_abfd),
-      bfd *ignore_abfd)
-{
-  return 0;            /* FIXME, this is the wrong value! */
-}
diff --git a/bfd/aoutx.c b/bfd/aoutx.c
deleted file mode 100755 (executable)
index e69de29..0000000
diff --git a/bfd/archures.h b/bfd/archures.h
deleted file mode 100755 (executable)
index db14d1d..0000000
+++ /dev/null
@@ -1,35 +0,0 @@
-/* Intel 960 machine types */
-
-/* Copyright (C) 1990, 1991 Free Software Foundation, Inc.
-
-This file is part of BFD, the Binary File Diddler.
-
-BFD is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 1, or (at your option)
-any later version.
-
-BFD is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with BFD; see the file COPYING.  If not, write to
-the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-/*
-   Machine architecture and type definitions for BFD.
-
-   These definitions are only used inside the BFD package.  External programs
-   access them by calling bfd_scan_arch_mach() and bfd_arch_mach_string().
-
-   The architectures themselves are defined in bfd.h since they are an
-   enum needed for BFD structs.  Numeric machine types are simply used
-   as-is, e.g. 68020.  Non-numeric machine types like "i960CA" have
-   names in this file.  */
-
-/* $Id$ */
-
-
diff --git a/bfd/awkscan b/bfd/awkscan
deleted file mode 100755 (executable)
index 69b0cea..0000000
+++ /dev/null
@@ -1,12 +0,0 @@
-# NOTE: BEGIN pattern gives errors if other than 1st line; 
-# END ditto if other than last.
-BEGIN { print "@c ------------------------------START TEXT FROM " FILENAME }
-#
-# Keep /*doc* blocks (terminated by either */ or *-*/)
-/^\/\*doc\*/,/^\*\/|^\*-\*\//
-#
-# Also keep two kinds of /*proto blocks
-/^\/\*proto\*/,/^\*\/|^\*-\*\//
-/^\/\*proto-internal\*/,/^\*\/|^\*-\*\//
-#
-END { print "@c ------------------------------END TEXT FROM " FILENAME }
diff --git a/bfd/awkscan-ip b/bfd/awkscan-ip
deleted file mode 100755 (executable)
index 73bd61f..0000000
+++ /dev/null
@@ -1,8 +0,0 @@
-# Awk filter, 1st filter for BFD internal prototype file extraction
-#
-# keep /*proto-internal blocks
-/^\/\*proto-internal\*/,/^\*\/|^\*-\*\//
-#
-# Apparent bug in sed can discard last line in some situations; therefore
-# make last line harmless.
-END { print "\n" }
diff --git a/bfd/awkscan-p b/bfd/awkscan-p
deleted file mode 100755 (executable)
index c7fe79f..0000000
+++ /dev/null
@@ -1,8 +0,0 @@
-# Awk filter, 1st filter for BFD prototype file extraction
-#
-# keep /*proto blocks
-/^\/\*proto\*/,/^\*\/|^\*-\*\//
-#
-# Apparent bug in sed can discard last line in some situations; therefore
-# make last line harmless.
-END { print "\n" }
diff --git a/bfd/bfd.doc b/bfd/bfd.doc
deleted file mode 100755 (executable)
index c74c8ce..0000000
+++ /dev/null
@@ -1,705 +0,0 @@
-This file contains -*- Text -*-.
-
-BFD is a set of routines for reading and writing binary files.
-
-The user should call only the interface routines at the end of bfd.h.
-The one I'm working out of is /4/gumby/bfd/bfd.h
-
-       Sample "strip" program using BFD:
-
-       #include "bfd.h"
-
-       doit ()
-       {
-               ibfd = bfd_openr(...)
-               obfd = bfd_openw(...)
-               bfd_check_format (ibfd, object);
-               bfd_set_format (obfd, object);
-
-               bfd_set_arch_mach (obfd, ...)
-               bfd_set_start_address (obfd, ...)
-               etc...
-       
-               [optionally:
-                 asymbol * foo = malloc (get_symtab_upper_bound (ibfd));
-                 bfd_canonicalize_symtab (ibfd, foo);
-                 <sort foo, frob foo, etc, using asymbol def from bfd.h>
-                 bfd_set_symtab (obfd, foo, updated_symbol_count);
-               ]
-
-               bfd_map_over_sections (abfd, setup, NULL);
-               bfd_map_over_sections (abfd, cleaner, NULL);
-
-               bfd_close (obfd);
-               bfd_close (ibfd);
-       }
-
-       setup (ibfd, sect)
-       {
-           osect = make_section (obfd, bfd_section_name (ibfd, sect));
-           bfd_set_section_size (obfd, osect, bfd_section_size (ibfd, sect));
-           ...     
-       }
-
-       cleaner (ibfd, sect)
-       {
-           osect = bfd_get_section_by_name (obfd,
-                                          bfd_section_name (ibfd, sect));
-           bfd_copy_section (ibfd, sect, obfd, osect);
-           [perhaps: bfd_set_reloc (osect, NULL, 0); ]
-       }
-           
-
-\f
-BFD is a package for manipulating binary files required for developing
-programs.  It implements a group of structured operations designed to
-shield the programmer from the underlying representation of these
-binary files.  It understands object (compiled) files, archive
-libraries, and core files.  It is designed to work in a variety of
-target environments.
-
-To use the library, include bfd.h and link with libbfd.a.      
-
-A bfd iteself is a representation for a particular file.  It is opened
-in a manner similar to a file; code then manipulates it rather than
-the raw files.
-\f
-BFD makes a distinction between TARGETS (families of file formats) and
-FORMATS (individual file formats).  For instance, the "sun4os4" target
-can handle core, object and archive formats of files.  The exact
-layout of the different formats depends on the target environment.
-
-The target "default" means the first one known (usually used for
-environments that only support one format, or where the common format
-is known at compile or link time).  The target NULL means the one
-specified at runtime in the environment variable GNUTARGET; if that is
-null or not defined then the first entry in the target list is chosen
-(on output), or all targets are searched (on input) to find a matching
-one..
-
-Most programs should use the target NULL.
-
-There is a way to get a list of the names of all the targets:
-char**   bfd_target_list ()
-         This function returns a freshly-malloced list of all the
-         defined targets (or NULL if it could not malloc).  The names
-         are read-only.  You could use this to prompt the user, or
-         perhaps to error-check.
-
-char * bfd_format_string (bfd_format format)
-     This function will give you a printable, single-word description
-     (like "core" or "archive") for a bfd format.
-\f
-Error handling
-
-General rules:
-functions which are boolean return true on success and false on failure
-(unless they're a predicate).  Functions which return pointers to
-objects return NULL on error.  The specifics are documented with each
-function.
-
-If a function fails, you should check the variable bfd_error.  If the
-value is no_error, then check the C variable errno just as you would
-with any other program.  The other values bfd_error may take on are
-documented in bfd.h.
-
-If you would prefer a comprehensible string for the error message, use
-the function bfd_errmsg:
-       char * bfd_errmsg (error_tag)
-This function returns a read-only string which documents the error
-code.  If the error code is no_error then it will return a string
-depending on the value of errno.
-
-bfd_perror() is like the perror() function except it understands
-bfd_error.
-\f
-Operations on bfds themselves
-
-bfd *  bfd_openr  (char *filename, char *target);
-bfd *  bfd_fdopenr  (int fd, char *target, char *filename);
-
-       Open a binary file for reading.  TARGET is the type of the file,
-       a char string like "sun4os4" or "elf".  (Note this is not the
-       "function" of the file, e.g. an object versus a core file
-       versus an archive, but instead describes how all these files
-       are encoded.)  Returns a new bfd or NULL upon failure.
-       
-bfd *  bfd_openw  (char *filename, char *target);
-
-       Open a file named `filename'  for writing.  If an existing
-       file has the same name, then it will be overwritten by a
-       successful bfd_close on the returned bfd.  Will return either
-       a new bfd or NULL upon failure.
-
-boolean  bfd_close  (bfd *abfd);
-       
-       Close a BFD opened for either reading or writing.  May involve
-       several filesystem operations, depending on the data format;
-       some things may not be known to the system until file-closing
-       time.  Returns true if it successfully wrote the file, false
-       if not.  A false return will not leave a partially-written
-       file behind with the name supplied to bfd_openw.
-
-       On a bfd open for reading will generally successfully
-       complete.
-
-       It is an error to call this on a file opened from inside an
-       archive.
-
-       FIXME -- show which error codes may be recoverable and
-       followed by another call to bfd_close!
-
-
-The defined formats are specified by the enumeration bfd_format.
-       
-boolean  bfd_check_format  (bfd *abfd, bfd_format format);
-
-       This routine must be called after a bfd_openr.  It sets up
-       internal data structures based on the contents of the file.
-       It returns FALSE if the file is not really in the specified
-       format.
-
-boolean  bfd_set_format  (bfd *abfd, bfd_format format);
-
-       This routine must be called after a bfd_openw.  It sets up
-       internal data structures for the proper format of file.
-       It returns FALSE if that format is not supported for output
-       (e.g. core files).
-
-The following macros may be used to obtain information about a bfd:
-
-bfd_get_filename -- returns a pointer to a null-terminated string
-       which names the bfd's file, or NULL if that is not known.
-       Don't side-effect this string!
-bfd_get_format -- returns the format code for the bfd.
-bfd_get_target -- returns the string which names the bfd's target.
-bfd_get_mtime -- returns an time_t indicating the modification time of an
-             input bfd, if that could be determined, or 0 of not.
-\f
-Object files have certain properties.  For input bfds, these
-properties may be read at any time.  For output bfds you should set
-them before you begin building any sections.
-       
-bfd_vma        bfd_get_start_address  (bfd *abfd);
-
-       Returns the address in an object file where execution will begin.
-
-boolean        bfd_set_start_address   (bfd *abfd, int vma);  
-
-       Set the address where execution will start in an object file.
-
-       If the address you select is incorrect for your architecture
-       (for instance, if it's required to be on a page_boundary and
-       your supplied starting address is not, then you may get the
-       invalid_operation error.  It is not always possible to
-       generate an error in this case.
-
-An object file has an architecture, which is the general instruction
-set of the instructions that it contains.  Architectures are defined in
-enum bfd_architecture in bfd.h.  New architectures can be added by
-putting them in the enum, updating architectures.c, and adding code to
-handle them for the object files that know that architecture.  The
-bfd_architecture values are not stored in files, but are only used
-within the BFD library and its callers.
-
-An object file also has a machine type, which is the specific machine
-within the architecture.  For example, if the architecture is bfd_arch_m68k,
-the Motorola 68000 series, then the machine type might be 68010, the mc68010
-chip.  For architectures such as the SPARC where specific versions of
-the architecture exist, the version number should probably be used.
-
-Particular object file formats may or may not store the machine architecture
-and type.  When copying an object file, you should copy these fields.
-Most callers of BFD will not need to know the particular values that
-these fields contain, but will instead propagate them from file to file,
-or compare the architectures from two files.
-
-enum bfd_architecture bfd_get_architecture (bfd *abfd);
-unsigned long bfd_get_machine     (bfd *abfd);
-
-       Get the machine type and architecture.
-
-boolean bfd_set_arch_mach         (bfd *abfd, enum bfd_architecture arch,
-                                   unsigned long machine);
-
-       Set the architecture and machine type.  The result is true
-       if the object file can exactly represent the specified type.
-       The result is false otherwise.
-
-boolean bfd_arch_compatible       (bfd *abfd, bfd *bbfd,
-                                   enum bfd_architecture *res_arch,
-                                   unsigned long *res_machine);
-
-       Decides whether two BFD's contain compatible architectures and
-       machine types.  If the result is TRUE and the res_arch and
-       res_machine pointers are non-NULL, the resulting "merged" 
-       architecture and machine type are returned through the pointers.
-       A linker could call this to decide whether two object files
-       can be linked, and to deterine the arch and machine type of
-       the resulting file.
-
-char * bfd_printable_arch_mach     (enum bfd_architecture arch,
-                                   unsigned long machine);
-
-       Returns a printable string that represents the particular
-       combination of architecture and machine type.
-
-boolean bfd_scan_arch_mach        (char *string, enum bfd_architecture *archp,
-                                   unsigned long *machinep);
-
-       Examines a printable string and tries to extract an
-       architecture and machine type from it.  The intended use is for
-       parsing specifications from the user, e.g. command line
-       arguments.  The result is true if a known architecture was
-       found, and the resulting architecture and machine type are
-       stored through the argument pointers.  Note that an
-       architecture scannable by this function might not be
-       representable by the particular object file format in use.
-       (i.e. bfd_set_arch_mach might return false).
-
-
-There are also a number of boolean flags which apply to object bfds.
-
-flagword bfd_get_file_flags       (bfd *abfd); 
-
-        returns a flagword containing the bfd's flags.
-
-boolean bfd_set_file_flags        (bfd *abfd, flagword flags,
-                                       boolean on_or_off); 
-
-       sets (on_or_off == true) or clears (on_or_off == false) the flags
-       specified by flagword.  All other flags are unaffected.
-       Some flag combinations don't make sense; It is not always
-       possible to detect them (since they may depend on other information).
-       Returns true if the flags could be modified as requested,
-       false if not.  Upon a false return, no flags will have been
-       altered.
-
-
-flagword bfd_applicable_file_flags     (bfd *abfd); 
-
-        returns a flagword with bits set for all the flags which are
-        meaningful for the bfd.
-
-The flags are:
-    HAS_RELOC -- file contains unresolved relocation information.
-    EXEC_P -- file can be executed.  These two may both be on in the
-             case of some dynamically-linked binaries.
-    HAS_LINENO -- has line number information.
-    HAS_DEBUG -- has debugging information.
-    HAS_SYMS -- has any symbols.
-    HAS_LOCALS -- has local symbols.
-    DYNAMIC -- binary is dynamically linked.
-    WP_TEXT -- text is write-protected
-    D_PAGED -- binary should be demand-paged
-
-These flags are one bit wide and may be OR-ed together with |.
-
-If you are building a large application with bfd there may be data
-specific to your program that you may wish to associate with a bfd.
-Rather than require you to build a parallel table structure, bfd
-provides a void* pointer in each bfd for arbitrary user data.  The
-macro bfd_usrdata (bfd *abfd) extracts these data; you may set them
-with = (ie bfd_usrdata (my_bfd) = frob_it (my_bfd, moon_phase);).
-\f
-Object and core files have sections.
-
-File sections are represented by opaque pointers.  You may map over
-the sections of a file or you may ask for one by name.  Note that not
-all files may have all the possible sections.
-
-Section pointers are valid from the time you get them until the bfd
-to which they refer is closed.
-
-When doing output, you must set up all the file's sections before
-outputting to any.   All that means is that all the file's sections
-must have already been created and their size set before output
-commences.
-
-Each section contains some small information, plus three chunks of
-data in the object file:  contents, relocation, and line numbers.
-In some file formats (e.g. a.out), the line number part is always
-empty, and line number information (if any) is instead recorded in
-the symbol table.
-
-sec_ptr        bfd_get_section_by_name (bfd *abfd, char *name); 
-       Returns a section named NAME, or NULL if none by that name
-       exists.  Works on input and output bfds.
-
-sec_ptr        bfd_make_section        (bfd *abfd, char *name); 
-       Creates a section named name in the output bfd abfd.
-       returns NULL if it cannot create the section (if, for instance,
-       the output format does not permit such a section).  If a
-       section with that name already exists, it is returned; a new
-       one with the same name is NOT created.
-
-unsigned int bfd_count_sections (bfd *abfd)
-
-       This function returns the number of sections in the bfd abfd.
-
-void   bfd_map_over_sections   (bfd *abfd, void (*operation)(),
-                                void *user_storage); 
-
-       This is how you operate on all sections of an input file.
-       Pass in a function pointer.  The function will be called for each
-       section of the file, in random order.  It will be passed
-       three arguments: the bfd, the sec_ptr for the section, and
-       whatever was passed in as user_storage.
-
-char * bfd_section_name        (bfd *abfd, sec_ptr ptr); 
-
-       Produces the name of a section, e.g. ".text" or ".data".
-       This will produce arbitrary names for files with extensible
-       section names (e.g. COFF, ELF) so don't assume that you will
-       only see a few values here.
-
-long   bfd_section_size        (bfd *abfd, sec_ptr ptr); 
-
-       The size of a section in bytes.  Result == -1 for error.
-
-boolean        bfd_set_section_size    (bfd *abfd, sec_ptr section unsigned long size);
-
-       Set the size of a section.  This must be done before any data
-       transfer is done for the section.
-
-bfd_vma        bfd_section_vma (bfd *abfd, sec_ptr ptr); 
-
-       Virtual memory address where a section "belongs".
-
-boolean        bfd_set_section_vma     (bfd *abfd, bfd_vma vma);
-
-       Set the virtual memory address of a section.
-
-int bfd_get_section_alignment  (bfd *abfd, sec_ptr ptr); 
-
-        returns the alignment of a section.  If alignment is not
-       possible, return value is undefined.
-       
-boolean bfd_set_section_alignment  (bfd *abfd, sec_ptr ptr, int alignment) 
-
-       returns true if it can set the section to the requested value.
-       Alignment is an integer; it refers to the power of two
-       specifying the byte boundary we want (ie 0 is byte-aligned; 4
-       is word aligned).  If the requested alignment is not available
-       any existing value is unchanged.
-
-Sections have properties just as object files may:
-
-flagword bfd_get_section_flags    (bfd *abfd, sec_ptr section); 
-
-        returns a flagword containing the section's flags.
-
-boolean bfd_set_section_flags     (bfd *abfd, sec_ptr section,
-                                       flagword flags, boolean on_or_off); 
-
-       sets (on_or_off == true) or clears (on_or_off == false) the flags
-       specified by flagword.  All other flags are unaffected.
-       Some flag combinations don't make sense; It is not always
-       possible to detect them (since they may depend on other information).
-       Returns true if the flags could me modified as requested,
-       false if not.  Unpon a false return, no flags will have been
-       altered.
-
-flagword bfd_applicable_section_flags  (bfd *abfd); 
-
-        returns a flagword with bits set for all the flags which are
-        meaningful for a section.
-
-The flags are:
-
-    SEC_BALIGN -- segment can be byte-aligned.
-    SEC_RELOC -- segment should be relocated.
-    SEC_ALLOC -- when converted into a memory image with the intent of
-           constructing a runable process, memory space will be
-           allocated for this section.
-    SEC_LOAD -- when converted into a memory image with the intent of
-           constructing a runable process, section contents will be
-           copied from the object file into memory.  When this flag
-           is set, SEC_ALLOC is guaranteed to also be set.
-    SEC_HAS_CONTENTS -- The contents of this section exist in the
-           object file.  Sections whose contents do not exist in the
-           object file may still have their contents read.  On read,
-           a segment filled with zeroes will be invented to satisfy
-           the read request.  It is an error to attempt to set the
-           contents of a section that has no contents.
-
-These last three probably need some explanation.  In a traditional,
-native unix object format, there are three real sections, text, data,
-and bss.  The text section will be allocated memory on exec, and will
-be loaded from file into memory on exec.  So the flags for a
-traditional unix text section would typically be at least (SEC_ALLOC |
-SEC_LOAD | SEC_HAS_CONTENTS).  The data section has basically these
-same traits.  The bss section, however is a little different.  It is
-not relocated, and it is not loaded from file on exec, but it is
-allocated memory on exec.  Thus, its flags would be more like
-(SEC_ALLOC).  It is possible to have a section which is the converse
-of the bss section.  That is, (SEC_HAS_CONTENTS & ~SEC_ALLOC).  This
-could be anything from profiling information or notes from one pass of
-a toolchain to another to time and version stamp information.
-
-Note that the section flags currently lack information on position
-dependance.
-
-boolean        bfd_get_section_contents  (bfd *abfd, sec_ptr section,
-                                  unsigned char *location,
-                                  int offset, int count); 
-
-       Stores count bytes from the section's contents starting at
-       offset from within those contents.  The values are stored into
-       location.  Returns true if it could do so.  Supplying invalid
-       values for offset and count will produce unpredictable results.
-
-boolean        bfd_set_section_contents (bfd *abfd, sec_ptr section,
-                                unsigned char *location,
-                                int offset, int count); 
-       Stores count bytes from location into offset within the
-       section contents.  You need not write all the contents contiguously
-       (that is, you may write words 5-7 followed by 0-4 if you
-       wish).  However once you start writing into a section, any
-       other sections into which you have previously written are
-       considered finished, and you may not write in them any more.
-
-*** Line numbers ***
-
-bfd_get_section_lineno_size (bfd *abfd, sec_ptr section);
-       Returns how many bytes of line numbers are associated with this
-       section.
-
-bfd_set_section_lineno_size (bfd *abfd, sec_ptr section, unsigned long val);
-       Sets the number of bytes of line numbers that this section should
-       contain.
-
-boolean bfd_get_section_linenos (bfd *abfd, sec_ptr section,
-                                unsigned char *location,
-                                int offset, int count); 
-       Same as get_section_contents, except that it works on the linenos
-       for this section.
-
-boolean bfd_set_section_linenos (bfd *abfd, sec_ptr section,
-                                unsigned char *location,
-                                int offset, int count); 
-       Same as set_section_contents, except that it works on the linenos
-       for this section.
-
-As with files, you may associate arbitrary program-specific data with
-a section of a bfd.  The following two functions are provided for
-manipulating these data:
-
-void * bfd_get_section_userdata (bfd *abfd, sec_ptr section)
-       Returns whatever was stored in section's user data, or NULL if nothing.
-
-boolean bfd_set_section_userdata (bfd *abfd, sec_ptr section, void *contents)
-       Set the section contents.  Returns true if it can, false if not.
-\f
-Core files
-
-Core files are currently only supported for reading.
-
-Apart from opening them, looking at the various sections (generally
-the .data, .stack, and .regs sections; maybe a .user_struct section
-eventually), you can make some queries about the status of the core
-file, detailed below.  The ".regs" section contains the general and
-floating point registers of the process that died, in some machine-
-specific order and format "intended to be unsurprising to someone who
-knows the machine".
-
-char *  bfd_core_file_failing_command  (bfd *abfd);
-
-       The command name of the program that failed, creating the core file.
-       The result is NULL if BFD can't figure out what the failing command was.
-
-int  bfd_core_file_failing_signal  (bfd *abfd);
-
-       The signal number which caused the program to die, causing the
-       core file to be created.  It will be positive if valid.
-
-boolean        core_file_matches_executable_p  (bfd *core_bfd, bfd *exec_bfd);
-
-       For debuggers, checks whether a core file "matches" (is likely to
-       have come from) an executable file.  This will not be perfect on
-       most systems, but will just provide a way to reject gross mismatches.
-\f
-Archives.
-
-An archive is a special file which can contain other files.
-Originally it was intended to be a general way to group files, the way
-tar is today.  But now it is used almost exclusively to hold object
-files.
-
-An archive may be opened for reading or writing just like any other
-bfd.  Once it is open for reading you may obtain bfds for each of the
-files contained within it with the following function:
-
-bfd *  bfd_openr_next_archived_file    (bfd *arch_bfd, bfd *last_file);
-
-       If called with NULL as the second argument, returns the first
-       file contained in the archive arch_bfd.  If called with a file
-       contained within arch_bfd, returns the one which follows that
-       one, or NULL if it was the last.  Returns NULL also if the
-       bfd supplied as last_file did not come from the archive arch_bfd.
-                                                      
-Any bfd open for read may be placed in an output archive.  When the
-output archive is closed, the contents will be placed into the
-archive.
-
-You control the order of files in an archive.  You set the first one
-with the following function:
-
-boolean bfd_set_archive_head (bfd *output_archive, bfd *new_head)
-
-       This function sets the first file in the archive
-       output_archive to be the bfd new_head.
-
-bfd's contain a pointer called next, which is bfd *.  It is used by
-bfd_close when an archive is closed to decide which file should next
-go into the archive.  So to place a group of files into an archive,
-open bfds for each of them, chain them together using the next pointer
-in the order you desire (be sure to store NULL into the final one's
-next pointer), then do bfd_set_archive_head with the head of the
-chain.  The next pointer may be freely smashed at any time; it is only
-looked at when closing an output archive.
-
-bfds for files contained within archives are normal bfds; you can do
-any input operations on them that you can do with a normal bfd.
-
-bfd_my_archive is a macro which takes an input bfd and returns NULL if
-it lives in the filesystem and a bfd if it is contained in an archive.
-In the latter case, the returned bfd is the archive itself.
-
-Archives containing only object files may have a "map" -- a table in
-the front which maps external symbols to the files which contain them.
-
-Archive maps will refer only to object files; if an archive contains a
-file which is not an archive that file will of course not appear in
-the map.        
-        
-boolean  bfd_has_map (bfd *archive_bfd)
-
-        This macro takes a bfd of an archive and returns true or
-        false depending on whether the bfd has a map.  For output
-        bfds this may be set to true or false, depending on whether
-        you want the map to be maintained or not.  For some targets,
-        setting this to false will cause no map to be generated; for
-        others it will merely cause an empty map to be created, since
-        a map is required by that target.
-
-For archives with maps you may use the following function:
-
-int bfd_get_next_mapent (bfd *abfd, int prev, char **name)
-
-    You may use this to step through all the entries in the archive
-    map.  Supply BFD_NO_MORE_SYMBOLS as the 'prev' entry to get the
-    first entry; then use successive returned values from this
-    function to get the succeeding ones.  The name of the next entry
-    will be stored through the pointer name.
-
-    This function returns BFD_NO_MORE_SYMBOLS when there are no more
-    entries or on error.
-bfd * bfd_get_elt_at_index (abfd, int index)
-
-    This function takes an index as returned by bfd_get_next_mapent
-    and returns the bfd which corresponds to that entry.  Returns NULL
-    on error.
-\f
-Symbol and relocation information.
-
-Symbol-table information is the area of greatest incompatibility.
-bfd has a canonical symbol representation; all formats are parsed into
-and out of it.
-
-Note that canonicalize_symtab takes a pointer to an array of pointers
-to canonical symbols.  This is necessary so that the end of the array
-can be marked with NULL.  You may shuffle the pointers and you may
-clobber the symbol contents.  But don't move the symbols themselves.
-
-unsigned int bfd_get_symtab_upper_bound        (bfd *abfd);
-
-       Returns the maximum number of bytes that would be taken by
-       the output of canonicalize_symtab.  Returns 0 on error.
-                                                             
-unsigned int bfd_canonicalize_symtab (bfd *abfd, asymbol **location);
-
-       Produces a symbol table in canonical format at LOCATION, which 
-       must be of size specified by get_symtab_upper_bound bytes.
-       Not all those bytes may be used.   Returns the number of
-       symbol pointers written.  Returns 0 upon error.
-
-boolean        bfd_set_symtab  (bfd *outbfd, asymbol **location,
-                       unsigned int symcount);
-
-       Takes a generic symbol table and an output bfd.  Used to set
-       the symbol table for an output bfd.  Do not change the table
-       after using this function (although the storage may be
-       reclaimed once the bfd has been closed).
-       
-If you're done with the symbol table you can tell bfd about it by
-calling bfd_reclaim_symbol_table, which takes a bfd.  Calling this
-function will also reclaim any relocation entries you may have
-requested.  If you don't use this function, bfd will keep around all
-symbol information until the bfd is closed.
-
-Similarly, relocations have a canonical format.  See the file bfd.h for
-the exact definition.  It is similar to the sun-4 relocation format.
-Please note that:
-o - Each relocation has a pointer to a generic symbol.
-o - Not all values of reloc_type are supported for all targets.  There
-    is a bitvector which explains which are; you can index into it by
-    relocation type.  The macro which extracts it is bfd_valid_reloc_types.
-
-Since relocation information is saved on a per-section basis, the
-interface is slightly different from that of the symbol table:
-
-unsigned int get_reloc_upper_bound     (bfd *abfd, sec_ptr asect);
-
-       Returns the maximum number of bytes that would be taken by
-       the output of canonicalize_reloc.  Returns 0 on error.
-
-unsigned int canonicalize_reloc (bfd *abfd, sec_ptr asect, arelent *location);
-
-       Produces a relocation table in canonical format at LOCATION,
-       which must be of size specified by get_reloc_upper_bound
-       bytes.  Not all those bytes may be used.  Returns the number
-       of entries written.  Returns 0 upon error.
-
-boolean        bfd_set_reloc   (bfd *outbfd, sec_ptr asect, arelent *location,
-                        unsigned int count);
-
-       Takes a generic reloc table and an output bfd.  Used to set
-       the reloc table for an output bfd.  Do not change the table
-       after using this function (although the storage may be
-       reclaimed once the bfd has been closed).
-\f
-Byte-swapping
-
-Unfortunately, not all machines have the same byte order.  Worse,
-storage layout is in general highly machine-dependent.  Although bfd
-can hide that from you in most cases, it cannot do so with the section
-contents, since they are totally uninterpreted.  Hence you must
-byte-swap those data yourself.  This is not usually much of an issue
-since you should just generate your data in the correct byte order.
-
-[THIS IS WRONG AND ALSO DOES NOT REFLECT THE CODE WHICH IS CORRECT]
-
-Fortunately, bfd can tell if byte-swapping or realignment is required
-at all!  The macro bfd_bit_twiddle_required takes a pointer to a bfd
-and returns true if byte-swapping is required, false if not.
-
-However if you don't wish to check this you may just use the following
-functions which will do the conversions required:
-
-
-long   bfd_getlong     (bfd *abfd, unsigned char *ptr);
-       bfd_putlong     (bfd *abfd, unsigned char *ptr, long time);
-
-short  bfd_getshort    (bfd *abfd, unsigned char *ptr);
-       bfd_putshort    (bfd *abfd, unsigned char *ptr, short stop);
-
-       These functions take a pointer that points to data which is,
-       or will be, part of a section contents.  They extract numbers
-       from the data, or insert numbers into the data.  The argument
-       or result is in the host's number format; the data stored at
-       the pointer or retrieved from it is in the target's number format.
-       Typically this transfer is either a no-op or is a byte-swap;
-       sometimes it involves an access to a "misaligned" location from
-       the host's point of view..
diff --git a/bfd/bfd.doc.ps b/bfd/bfd.doc.ps
deleted file mode 100755 (executable)
index 70638d5..0000000
+++ /dev/null
@@ -1,4564 +0,0 @@
-%!PS-Adobe-2.0
-%%Creator: dvips 5.47 Copyright 1986-91 Radical Eye Software
-%%Title: bfd.dvi
-%%Pages: 61 1
-%%BoundingBox: 0 0 612 792
-%%EndComments
-%%BeginProcSet: tex.pro
-/TeXDict 200 dict def TeXDict begin /N /def load def /B{bind def}N /S /exch
-load def /X{S N}B /TR /translate load N /isls false N /vsize 10 N /@rigin{
-isls{[0 1 -1 0 0 0]concat}if 72 Resolution div 72 VResolution div neg scale
-Resolution VResolution vsize neg mul TR matrix currentmatrix dup dup 4 get
-round 4 exch put dup dup 5 get round 5 exch put setmatrix}N /@letter{/vsize 10
-N}B /@landscape{/isls true N /vsize -1 N}B /@a4{/vsize 10.6929133858 N}B /@a3{
-/vsize 15.5531 N}B /@ledger{/vsize 16 N}B /@legal{/vsize 13 N}B /@manualfeed{
-statusdict /manualfeed true put}B /@copies{/#copies X}B /FMat[1 0 0 -1 0 0]N
-/FBB[0 0 0 0]N /nn 0 N /IE 0 N /ctr 0 N /df-tail{/nn 8 dict N nn begin
-/FontType 3 N /FontMatrix fntrx N /FontBBox FBB N string /base X array
-/BitMaps X /BuildChar{CharBuilder}N /Encoding IE N end dup{/foo setfont}2
-array copy cvx N load 0 nn put /ctr 0 N[}B /df{/sf 1 N /fntrx FMat N df-tail}
-B /dfs{div /sf X /fntrx[sf 0 0 sf neg 0 0]N df-tail}B /E{pop nn dup definefont
-setfont}B /ch-width{ch-data dup length 5 sub get}B /ch-height{ch-data dup
-length 4 sub get}B /ch-xoff{128 ch-data dup length 3 sub get sub}B /ch-yoff{
-ch-data dup length 2 sub get 127 sub}B /ch-dx{ch-data dup length 1 sub get}B
-/ch-image{ch-data dup type /stringtype ne{ctr get /ctr ctr 1 add N}if}B /id 0
-N /rw 0 N /rc 0 N /gp 0 N /cp 0 N /G 0 N /sf 0 N /CharBuilder{save 3 1 roll S
-dup /base get 2 index get S /BitMaps get S get /ch-data X pop /ctr 0 N ch-dx 0
-ch-xoff ch-yoff ch-height sub ch-xoff ch-width add ch-yoff setcachedevice
-ch-width ch-height true[1 0 0 -1 -.1 ch-xoff sub ch-yoff .1 add]{ch-image}
-imagemask restore}B /D{/cc X dup type /stringtype ne{]}if nn /base get cc ctr
-put nn /BitMaps get S ctr S sf 1 ne{dup dup length 1 sub dup 2 index S get sf
-div put}if put /ctr ctr 1 add N}B /I{cc 1 add D}B /bop{userdict /bop-hook
-known{bop-hook}if /SI save N @rigin 0 0 moveto}N /eop{clear SI restore
-showpage userdict /eop-hook known{eop-hook}if}N /@start{userdict /start-hook
-known{start-hook}if /VResolution X /Resolution X 1000 div /DVImag X /IE 256
-array N 0 1 255{IE S 1 string dup 0 3 index put cvn put}for}N /p /show load N
-/RMat[1 0 0 -1 0 0]N /BDot 260 string N /rulex 0 N /ruley 0 N /v{/ruley X
-/rulex X V}B /V statusdict begin /product where{pop product dup length 7 ge{0
-7 getinterval(Display)eq}{pop false}ifelse}{false}ifelse end{{gsave TR -.1 -.1
-TR 1 1 scale rulex ruley false RMat{BDot}imagemask grestore}}{{gsave TR -.1
--.1 TR rulex ruley scale 1 1 false RMat{BDot}imagemask grestore}}ifelse B /a{
-moveto}B /delta 0 N /tail{dup /delta X 0 rmoveto}B /M{S p delta add tail}B /b{
-S p tail}B /c{-4 M}B /d{-3 M}B /e{-2 M}B /f{-1 M}B /g{0 M}B /h{1 M}B /i{2 M}B
-/j{3 M}B /k{4 M}B /w{0 rmoveto}B /l{p -4 w}B /m{p -3 w}B /n{p -2 w}B /o{p -1 w
-}B /q{p 1 w}B /r{p 2 w}B /s{p 3 w}B /t{p 4 w}B /x{0 S rmoveto}B /y{3 2 roll p
-a}B /bos{/SS save N}B /eos{clear SS restore}B end
-%%EndProcSet
-%%BeginProcSet: special.pro
-TeXDict begin /SDict 200 dict N SDict begin /@SpecialDefaults{/hs 612 N /vs
-792 N /ho 0 N /vo 0 N /hsc 1 N /vsc 1 N /ang 0 N /CLIP false N /BBcalc false N
-/p 3 def}B /@scaleunit 100 N /@hscale{@scaleunit div /hsc X}B /@vscale{
-@scaleunit div /vsc X}B /@hsize{/hs X /CLIP true N}B /@vsize{/vs X /CLIP true
-N}B /@hoffset{/ho X}B /@voffset{/vo X}B /@angle{/ang X}B /@rwi{10 div /rwi X}
-B /@llx{/llx X}B /@lly{/lly X}B /@urx{/urx X}B /@ury{/ury X /BBcalc true N}B
-/magscale true def end /@MacSetUp{userdict /md known{userdict /md get type
-/dicttype eq{md begin /letter{}N /note{}N /legal{}N /od{txpose 1 0 mtx
-defaultmatrix dtransform S atan/pa X newpath clippath mark{transform{
-itransform moveto}}{transform{itransform lineto}}{6 -2 roll transform 6 -2
-roll transform 6 -2 roll transform{itransform 6 2 roll itransform 6 2 roll
-itransform 6 2 roll curveto}}{{closepath}}pathforall newpath counttomark array
-astore /gc xdf pop ct 39 0 put 10 fz 0 fs 2 F/|______Courier fnt invertflag{
-PaintBlack}if}N /txpose{pxs pys scale ppr aload pop por{noflips{pop S neg S TR
-pop 1 -1 scale}if xflip yflip and{pop S neg S TR 180 rotate 1 -1 scale ppr 3
-get ppr 1 get neg sub neg ppr 2 get ppr 0 get neg sub neg TR}if xflip yflip
-not and{pop S neg S TR pop 180 rotate ppr 3 get ppr 1 get neg sub neg 0 TR}if
-yflip xflip not and{ppr 1 get neg ppr 0 get neg TR}if}{noflips{TR pop pop 270
-rotate 1 -1 scale}if xflip yflip and{TR pop pop 90 rotate 1 -1 scale ppr 3 get
-ppr 1 get neg sub neg ppr 2 get ppr 0 get neg sub neg TR}if xflip yflip not
-and{TR pop pop 90 rotate ppr 3 get ppr 1 get neg sub neg 0 TR}if yflip xflip
-not and{TR pop pop 270 rotate ppr 2 get ppr 0 get neg sub neg 0 S TR}if}
-ifelse scaleby96{ppr aload pop 4 -1 roll add 2 div 3 1 roll add 2 div 2 copy
-TR .96 dup scale neg S neg S TR}if}N /cp{pop pop showpage pm restore}N end}if}
-if}N /normalscale{Resolution 72 div VResolution 72 div neg scale magscale{
-DVImag dup scale}if}N /psfts{S 65536 div N}N /startTexFig{/psf$SavedState save
-N userdict maxlength dict begin /magscale false def normalscale currentpoint
-TR /psf$ury psfts /psf$urx psfts /psf$lly psfts /psf$llx psfts /psf$y psfts
-/psf$x psfts currentpoint /psf$cy X /psf$cx X /psf$sx psf$x psf$urx psf$llx
-sub div N /psf$sy psf$y psf$ury psf$lly sub div N psf$sx psf$sy scale psf$cx
-psf$sx div psf$llx sub psf$cy psf$sy div psf$ury sub TR /showpage{}N
-/erasepage{}N /copypage{}N /p 3 def @MacSetUp}N /doclip{psf$llx psf$lly
-psf$urx psf$ury currentpoint 6 2 roll newpath 4 copy 4 2 roll moveto 6 -1 roll
-S lineto S lineto S lineto closepath clip newpath moveto}N /endTexFig{end
-psf$SavedState restore}N /@beginspecial{SDict begin /SpecialSave save N gsave
-normalscale currentpoint TR @SpecialDefaults}N /@setspecial{CLIP{newpath 0 0
-moveto hs 0 rlineto 0 vs rlineto hs neg 0 rlineto closepath clip}if ho vo TR
-hsc vsc scale ang rotate BBcalc{rwi urx llx sub div dup scale llx neg lly neg
-TR}if /showpage{}N /erasepage{}N /copypage{}N newpath}N /@endspecial{grestore
-clear SpecialSave restore end}N /@defspecial{SDict begin}N /@fedspecial{end}B
-/li{lineto}B /rl{rlineto}B /rc{rcurveto}B /np{/SaveX currentpoint /SaveY X N 1
-setlinecap newpath}N /st{stroke SaveX SaveY moveto}N /fil{fill SaveX SaveY
-moveto}N /ellipse{/endangle X /startangle X /yrad X /xrad X /savematrix matrix
-currentmatrix N TR xrad yrad scale 0 0 1 startangle endangle arc savematrix
-setmatrix}N end
-%%EndProcSet
-TeXDict begin 1000 300 300 @start /Fa 1 59 df<70F8F8F87005057C840D>58
-D E /Fb 1 59 df<78FCFCFCFC7806067B8510>58 D E /Fc 32 120 df<00FC00018200070300
-0607000E02000E00000E00000E00000E00000E0000FFFF000E07000E07000E07000E07000E0700
-0E07000E07000E07000E07000E07000E07000E07000E07000E07007F0FE0131A809915>12
-D<FFC0FFC00A0280880D>45 D<078018603030303060186018E01CE01CE01CE01CE01CE01CE01C
-E01CE01CE01CE01CE01C6018601870383030186007800E187E9713>48 D<03000700FF00070007
-00070007000700070007000700070007000700070007000700070007000700070007000700FFF0
-0C187D9713>I<0F80106020304038803CC01CE01C401C003C003800380070006000C001800100
-020004040804100430083FF87FF8FFF80E187E9713>I<0F8010E0207060787038203800780070
-0070006000C00F8000E000700038003C003CE03CE03CC03C4038407030E00F800E187E9713>I<
-00300030007000F000F001700370027004700C7008701070307020704070C070FFFF0070007000
-7000700070007007FF10187F9713>I<30183FF03FE03FC02000200020002000200027C0386020
-3000380018001C001C401CE01CE01C80184038403030E00F800E187E9713>I<01E006100C1818
-383038300070006000E000E7C0E860F030F018E018E01CE01CE01C601C601C7018301830301860
-07C00E187E9713>I<40007FFE7FFC7FFC40088010801080200040004000800180018001000300
-03000300030007000700070007000700070002000F197E9813>I<078018603030201860186018
-601870103C303E600F8007C019F030F86038401CC00CC00CC00CC00C6008201018600FC00E187E
-9713>I<07801860303070306018E018E018E01CE01CE01C601C603C303C185C0F9C001C001800
-18003870307060604021801F000E187E9713>I<1FC020604030C038E038E0380038007000E001
-8001000300020002000200020002000200000000000000000006000F000F0006000D1A7E9912>
-63 D<FFFF000E01C00E00E00E00700E00780E00780E00780E00780E00780E00F00E00E00E03C0
-0FFF800E01E00E00700E00780E003C0E003C0E003C0E003C0E003C0E00380E00780E00F00E01E0
-FFFF80161A7E991B>66 D<FFFF000E01C00E00E00E00300E00380E001C0E001C0E000E0E000E0E
-000F0E000F0E000F0E000F0E000F0E000F0E000F0E000F0E000E0E000E0E001E0E001C0E00380E
-00380E00700E01C0FFFF00181A7E991D>68 D<FFFFE00E00E00E00600E00200E00300E00100E00
-100E00100E04000E04000E04000E0C000FFC000E0C000E04000E04000E04000E00000E00000E00
-000E00000E00000E00000E00000E0000FFF000141A7E9919>70 D<3F8070C070E0207000700070
-07F01C7030707070E070E071E071E0F171FB1E3C10107E8F13>97 D<FC00001C00001C00001C00
-001C00001C00001C00001C00001C00001C00001CF8001F0E001E07001C03801C01801C01C01C01
-C01C01C01C01C01C01C01C01C01C03801C03001E07001B0C0010F000121A7F9915>I<07F80C1C
-381C30087000E000E000E000E000E000E0007000300438080C1807E00E107F8F11>I<07C01C30
-30187018600CE00CFFFCE000E000E000E0006000300438080C1807E00E107F8F11>101
-D<01F0031807380E100E000E000E000E000E000E00FFC00E000E000E000E000E000E000E000E00
-0E000E000E000E000E000E007FE00D1A80990C>I<FC00001C00001C00001C00001C00001C0000
-1C00001C00001C00001C00001CF8001D0C001E0E001E0E001C0E001C0E001C0E001C0E001C0E00
-1C0E001C0E001C0E001C0E001C0E001C0E00FF9FC0121A7F9915>104 D<18003C003C00180000
-0000000000000000000000FC001C001C001C001C001C001C001C001C001C001C001C001C001C00
-1C00FF80091A80990A>I<018003C003C001800000000000000000000000000FC001C001C001C0
-01C001C001C001C001C001C001C001C001C001C001C001C001C001C001C041C0E180E3007E000A
-2182990C>I<FC001C001C001C001C001C001C001C001C001C001C001C001C001C001C001C001C
-001C001C001C001C001C001C001C001C00FF80091A80990A>108 D<FC7C1F001D8E63801E0781
-C01E0781C01C0701C01C0701C01C0701C01C0701C01C0701C01C0701C01C0701C01C0701C01C07
-01C01C0701C01C0701C0FF9FE7F81D107F8F20>I<FCF8001D0C001E0E001E0E001C0E001C0E00
-1C0E001C0E001C0E001C0E001C0E001C0E001C0E001C0E001C0E00FF9FC012107F8F15>I<07E0
-1C38300C700E6006E007E007E007E007E007E0076006700E381C1C3807E010107F8F13>I<FCE0
-1D701E701E201C001C001C001C001C001C001C001C001C001C001C00FFC00C107F8F0F>114
-D<1F2060E04020C020C020F0007F003FC01FE000F080708030C030C020F0408F800C107F8F0F>
-I<0400040004000C000C001C003C00FFC01C001C001C001C001C001C001C001C001C201C201C20
-1C201C200E4003800B177F960F>I<FF3F9F803C0E0700380E06001C1604001C1704001E170C00
-0E2308000E2388000F239800074190000741D00003C1E0000380E0000380E0000180C000010040
-0019107F8F1C>119 D E /Fd 1 59 df<60F0F06004047D830B>58 D E
-/Fe 42 123 df<0FC01FF03838701CE00EE00EE00E400E000E001C001C00380030007000E001C0
-030006000C00180E300E7FFE7FFE0F177E9614>50 D<000E003E007C00F003E007C01F003E00F8
-00F000F8003E001F0007C003E000F0007C003E000E0F137E9414>60 D<4000E000F8007C001E00
-0F8007C001F000F8003E001E003E00F801F007C00F801E007C00F800E00040000F157E9514>62
-D<01C00003E00003E0000360000360000770000770000770000770000630000E38000E38000E38
-000E38000E38001FFC001FFC001C1C001C1C003C1E00380E00FE3F80FE3F8011177F9614>65
-D<FFF0FFFC381E380E3807380738073807380E381E3FFC3FFC381E380E38073807380738073807
-380E381EFFFCFFF810177F9614>I<03C60FFE1C3E181E381E700E700E600EE000E000E000E000
-E000E000E000600E700E700E380C181C1C380FF003C00F177E9614>I<FFE000FFF800383C0038
-1E00380E0038070038070038070038038038038038038038038038038038038038038038038038
-0700380700380E00381E00383C00FFF800FFE00011177F9614>I<FFFF00FFFF00380700380700
-3807003807003800003800003870003870003FF0003FF000387000387000380000380000380000
-380380380380380380380380FFFF80FFFF8011177F9614>I<FFFFFFFF38073807380738073800
-3800387038703FF03FF0387038703800380038003800380038003800FF00FF0010177E9614>I<
-FE3F80FE3F80380E00380E00380E00380E00380E00380E00380E00380E003FFE003FFE00380E00
-380E00380E00380E00380E00380E00380E00380E00380E00FE3F80FE3F8011177F9614>72
-D<FE0FE0FE0FE03E0F803B1B803B1B803B1B803B1B803BBB803BBB8039B38039B38039B38039F3
-8038E38038E380380380380380380380380380380380380380FE0FE0FE0FE01317809614>77
-D<FE3F80FE3F803E0E003B0E003B0E003B0E003B0E003B8E00398E00398E0039CE0039CE0039CE
-0038CE0038CE0038EE00386E00386E00386E00386E00383E00FE3E00FE3E0011177F9614>I<1F
-F07FFC783C701CE00EE00EE00EE00EE00EE00EE00EE00EE00EE00EE00EE00EE00EE00EE00E701C
-783C7FFC1FF00F177E9614>I<FFF0FFFC381E380E38073807380738073807380E381E3FFC3FF0
-38003800380038003800380038003800FE00FE0010177F9614>I<7FFF80FFFF80E1C380E1C380
-E1C380E1C38001C00001C00001C00001C00001C00001C00001C00001C00001C00001C00001C000
-01C00001C00001C00001C0000FF8000FF80011177F9614>84 D<FC1F80FC1F8070070070070070
-070070070070070070070030060031C6003BEE003BEE003B6E003B6E003B6E003B6E003B6E001B
-6C001B6C001A2C001E3C001E3C001E3C0011177F9614>87 D<7E3E007E3E001C38001E38000E78
-000F700007F00007E00003E00003C00001C00003C00003E00003E0000770000770000E78000E38
-001C3C001C1C003C1E00FE3F80FE3F8011177F9614>I<1FC0007FF000707800201800001C0000
-1C0007FC001FFC003C1C00701C00E01C00E01C00E01C00707C003FFF800F8F8011107E8F14>97
-D<FC0000FC00001C00001C00001C00001C00001C00001CF8001DFE001F07001E03001C03801C01
-C01C01C01C01C01C01C01C01C01C01C01C03801E03001F0E001DFC000CF8001217809614>I<03
-F80FFC1C1C380870006000E000E000E000E00060007000380E1C1E0FFC03F00F107E8F14>I<00
-7E00007E00000E00000E00000E00000E00000E0007CE000FFE001C3E00301E00700E00E00E00E0
-0E00E00E00E00E00E00E00E00E00700E00301E00383E001FEFC007CFC012177F9614>I<07E00F
-F01C38301C700CE00EE00EFFFEFFFEE00060007000380E1C1E0FFC03F00F107E8F14>I<007C00
-FE01CE03840380038003807FFEFFFE038003800380038003800380038003800380038003800380
-7FFC7FFC0F177F9614>I<07CF001FFF80383B80301800701C00701C00701C003018003838003F
-F00037C0007000007000003FF8001FFC003FFE00700F00E00380E00380E00380E003807007003C
-1E001FFC0007F00011197F8F14>I<FC0000FC00001C00001C00001C00001C00001C00001C7800
-1DFE001F86001E07001C07001C07001C07001C07001C07001C07001C07001C07001C07001C0700
-FF8FE0FF8FE01317809614>I<030007800780030000000000000000007F807F80038003800380
-038003800380038003800380038003800380FFFCFFFC0E187D9714>I<006000F000F000600000
-0000000000001FF01FF00070007000700070007000700070007000700070007000700070007000
-7000700070007040E0E0C07F803F000C207E9714>I<FC0000FC00001C00001C00001C00001C00
-001C00001DFF801DFF801C3C001C78001CF0001DE0001FC0001FC0001FE0001EF0001C70001C38
-001C38001C1C00FE3F80FE3F8011177F9614>I<FF80FF80038003800380038003800380038003
-8003800380038003800380038003800380038003800380FFFEFFFE0F177E9614>I<FB8E00FFDF
-003CF3803CF38038E38038E38038E38038E38038E38038E38038E38038E38038E38038E380FEFB
-E0FE79E01310808F14>I<FC7800FDFE001F86001E07001C07001C07001C07001C07001C07001C
-07001C07001C07001C07001C0700FF8FE0FF8FE01310808F14>I<07C01FF03C78701C701CE00E
-E00EE00EE00EE00EE00E701C783C3C781FF007C00F107E8F14>I<FCF800FDFE001F07001E0300
-1C03801C01C01C01C01C01C01C01C01C01C01C01C01C03801E03001F0E001DFC001CF8001C0000
-1C00001C00001C00001C00001C0000FF8000FF80001218808F14>I<FE1F00FE7F800EE3800F81
-000F00000F00000E00000E00000E00000E00000E00000E00000E00000E0000FFF000FFF0001110
-7F8F14>114 D<0FD83FF86038C038C038F0007F803FF007F8001C6006E006F006F81CFFF8CFE0
-0F107E8F14>I<030007000700070007007FFCFFFC07000700070007000700070007000700070E
-070E070E070C03FC00F00F157F9414>I<FC3F00FC3F001C07001C07001C07001C07001C07001C
-07001C07001C07001C07001C07001C07001C1F000FFFE003E7E01310808F14>I<FE3F80FE3F80
-1C1C001C1C001C1C001C1C000E38000E38000E380006300007700007700007700003E00003E000
-03E00011107F8F14>I<FF7F80FF7F80380E00380E00380E00380E0039CE0039CE0019CC001B6C
-001B6C001A6C001A6C001E7C000E78000E780011107F8F14>I<7E3F007E3F001E38000E780007
-700007E00003E00001C00003C00003E0000770000E78000E38001C1C00FE3F80FE3F8011107F8F
-14>I<FE3F80FE3F801C1C001C1C001C1C000E1C000E38000E3800073800073000073000037000
-03700001E00001E00001E00001C00001C00001C0000380007380007700007E00003C000011187F
-8F14>I<3FFF7FFF700E701C7038007000E001C0038007000E001C0738077007FFFFFFFF10107F
-8F14>I E /Ff 70 123 df<0003F07C001E0DC600380F0F00701E0F00E01E0E00E00C0001C01C
-0001C01C0001C01C0001C01C0001C01C00038038007FFFFFC00380380003803800038038000380
-38000700700007007000070070000700700007007000070070000E00E0000E00E0000E00E0000E
-00E0000E00E0000E00E0001C01C0001E01E000FF8FFE0020207E9F1B>11
-D<0003E0001C1800381800703C00E03C00E03801C00001C00001C00001C00001C0000380007FFF
-F00380700380700380700380700700E00700E00700E00700E00700E00700E00E01C00E01C00E01
-C00E01C00E01C00E01C01C03801E03C0FF0FF816207E9F19>I<0003F4001C1C00383C00703C00
-E03C00E03801C03801C03801C03801C03801C0380380707FFFF003807003807003807003807007
-00E00700E00700E00700E00700E00700E00E01C00E01C00E01C00E01C00E01C00E01C01C03801E
-03C0FF9FF816207E9F19>I<0003F03F00001E09E08000380F80C000701F01E000E03E01E000E0
-1E01C001C01C000001C01C000001C01C000001C01C000001C01C000003803800007FFFFFFF8003
-803803800380380380038038038003803803800700700700070070070007007007000700700700
-070070070007007007000E00E00E000E00E00E000E00E00E000E00E00E000E00E00E000E00E00E
-001C01C01C001E01E01E00FF8FF8FFC023207E9F26>I<387C7C7E3A040404080810204080070E
-789F0D>39 D<00030004000800100020006000C0018001000300060006000C000C001C00180018
-00380030003000700070006000600060006000E000E000E000E000E000E0006000600060006000
-6000300030001000180008000C00040002000100102E7CA112>I<008000C00060002000300018
-0018000C000C000C000E00060006000600060006000600060006000600060006000E000E000E00
-0C000C001C001800180038003000300060006000C000C001800100030006000C00180030006000
-80000F2E7FA112>I<0020000060000060000060000060007061C03843800E4E0007580001E000
-01E00006B8001C9C00708700E0838001800001800001800001800001000012147AA117>I<1C3E
-7E7E3A0202040408081020C0070E7D840D>44 D<FFC0FFC00A027D8A0F>I<3078F8787005057C
-840D>I<007E0001C3000301800701C00E00C00E00E01C00E01C00E03C01E03801E07801E07801
-E07801E07801E07801E0F003C0F003C0F003C0F003C0F003C0F00380F00780E00780E00700E007
-00E00E00600E00701C003038003870000FC000131F7C9D17>48 D<000C001C00FC0F3800380038
-00380038003800700070007000700070007000E000E000E000E000E000E001C001C001C001C001
-C001C0038003C0FFFE0F1E7C9D17>I<003F8000C1E00100F00200780400780400780F007C0F80
-7C0F807C0F00780600780000F80000F00001E00001C0000380000700000E00001C000038000060
-0000C0000180000300200600200800401000403FFFC07FFF80FFFF80161E7E9D17>I<007F0001
-83C00201E00400F00700F00F00F00F01F00F01F00001E00001E00003C0000380000700000E0000
-F800000E000007000007800007C00003C00007C03007C07807C0F807C0F807C0F00780800F0040
-0E00201C0018780007E000141F7D9D17>I<0000600000600000E00001C00003C00005C0000DC0
-0009C00011C000238000438000C380008380010380020380040700080700180700100700200700
-400700FFFFF0000E00000E00000E00000E00000E00001C00001E0001FFE0141E7E9D17>I<0180
-3001FFE003FFC003FF0003FC00020000020000020000040000040000040000047C000587000603
-800C01800801C00001C00001E00001E00001E00001E07003C0F803C0F003C0E003808007804007
-00400E00201C0018700007C000141F7D9D17>I<000F8000704000C0200180E00301E00701E00E
-00C01E00001C00003C000038000078F800790E007A07007C0300F80380F80380F003C0F003C0F0
-03C0F003C0F00780E00780E00780E00700E00F00600E00701C0030180018700007C000131F7C9D
-17>I<003F0000C1C00100600200600400300C00300C00300C00300C00600E00600F80C00FC180
-07F60003FC0001FC0001FF00063F800C0F801007C03003C06001C06000C0C000C0C000C0C000C0
-C00080C0010060030030040018180007E000141F7D9D17>56 D<007E0001C3000301800601C00E
-01C01C00C03C00E03C00E03C01E07801E07801E07801E07801E07803E07803E03803C03807C01C
-0BC00C13C003E380000780000780000700000E00600E00F01C00F01800E0300080600041C0003F
-0000131F7C9D17>I<0E1F1F1E0C000000000000000000003078F8787008147C930D>I<07000F80
-0F800F000600000000000000000000000000000000000000000018003C007C007C003C00040004
-000800080010001000200040008000091D7D930D>I<1FFFFFF83FFFFFFC000000000000000000
-0000000000000000000000000000000000000000000000FFFFFFF07FFFFFE01E0C7C9023>61
-D<07E01838201C401C701CF03CF03C603C0038007000E001C00180030002000600040004000800
-0800080008000000000000000000000030007800F800780070000E20799F15>63
-D<0000100000001800000038000000380000007800000078000000FC000001BC0000013C000003
-3C0000023C0000063C0000043E0000081E0000081E0000101E0000101E0000201E0000200F0000
-400F0000400F0000FFFF0000800F0001000F800100078002000780020007800400078004000780
-0C0007C03E0007C0FF807FFC1E207E9F22>65 D<07FFFF00007C01C0003C01E0003C00F0007800
-F8007800F8007800F8007800F8007800F8007800F000F001F000F001E000F003C000F00F8000FF
-FE0000F00F0001E007C001E003C001E003E001E001E001E001E001E001E003C001E003C003E003
-C003E003C003C003C007C003C00F8007800F0007803E00FFFFF0001D1F7E9E20>I<0001F80800
-0E061800380138007000F801E0007803C0007007800030078000300F0000301F0000301E000030
-3E0000203C0000007C0000007C0000007C0000007C000000F8000000F8000000F8000000F80000
-00F80000007800004078000080780000803C0000803C0001001C0002000E00020006000C000300
-100001C0E000003F00001D217B9F21>I<07FFFF00007C01E0003C00F0003C00780078003C0078
-003C0078001E0078001E0078001E0078001F00F0001F00F0001F00F0001F00F0001F00F0001F00
-F0001F01E0001E01E0003E01E0003E01E0003E01E0003C01E0007C03C0007803C000F003C000F0
-03C001E003C003C003C0078007800F0007803C00FFFFE000201F7E9E23>I<07FFFFF8007C0078
-003C0038003C001800780018007800080078000800780008007800080078080800F0100000F010
-0000F0100000F0300000FFF00000F0700001E0200001E0200001E0200001E0200001E0000801E0
-001003C0001003C0001003C0002003C0002003C0006003C000C0078001C0078007C0FFFFFF801D
-1F7E9E1F>I<07FFFFF8007C0078003C0038003C00180078001800780008007800080078000800
-7800080078000800F0100000F0100000F0100000F0300000F0700000FFF00001E0600001E02000
-01E0200001E0200001E0200001E0000003C0000003C0000003C0000003C0000003C0000003C000
-000780000007C00000FFFE00001D1F7E9E1E>I<0001FC04000F030C003C009C0070007C00E000
-3C01C0003803800018078000180F0000181F0000181E0000183E0000103C0000007C0000007C00
-00007C0000007C000000F8000000F8000000F8007FFCF80003E0780001E0780001E0780003C078
-0003C03C0003C03C0003C01C0003C00E0007C007000B800380118001E06080003F80001E217B9F
-24>I<07FFE0007C00003C00003C0000780000780000780000780000780000780000F00000F000
-00F00000F00000F00000F00001E00001E00001E00001E00001E00001E00003C00003C00003C000
-03C00003C00003C00007800007C000FFFC00131F7F9E10>73 D<07FFF000007E0000003C000000
-3C000000780000007800000078000000780000007800000078000000F0000000F0000000F00000
-00F0000000F0000000F0000001E0000001E0000001E0000001E0000001E0008001E0010003C001
-0003C0010003C0030003C0020003C0060003C0060007801E0007807C00FFFFFC00191F7E9E1C>
-76 D<07FC0000FFC0007C0000F800003C00017800003C00017800004E0002F000004E0002F000
-004E0004F000004E0004F000004E0008F000004E0008F00000870011E00000870011E000008700
-21E00000870021E00000870041E00000838041E00001038083C00001038083C00001038103C000
-01038203C0000101C203C0000101C403C0000201C40780000201C80780000201C80780000201D0
-0780000200F00780000600E00780000600E00F00000F00C00F8000FFE0C1FFF8002A1F7E9E2A>
-I<07FC01FFC0003E003E00003E001800003E001800004F001000004F0010000047801000004780
-10000043C010000043C010000083C020000081E020000081E020000080F020000080F020000080
-782000010078400001007C400001003C400001003C400001001E400001001E400002000F800002
-000F800002000F800002000780000200078000060003800006000300000F00010000FFE0010000
-221F7E9E22>I<0003F800001E0E000038070000E0038001C001C003C001E0078000E00F0000F0
-0F0000F01E0000F01E0000F83E0000F83C0000F87C0000F87C0000F87C0000F87C0000F8F80001
-F0F80001F0F80001F0F80001F0F80003E0780003E0780003C0780007C07C0007803C000F003C00
-1E001E001C000E0038000700F00003C3C00000FE00001D217B9F23>I<07FFFF00007C03C0003C
-01E0003C00F0007800F0007800F8007800F8007800F8007800F8007800F000F001F000F001E000
-F003C000F0078000F00F0000FFF80001E0000001E0000001E0000001E0000001E0000001E00000
-03C0000003C0000003C0000003C0000003C0000003C000000780000007C00000FFFC00001D1F7E
-9E1F>I<07FFFC00007C0700003C03C0003C01E0007801E0007801F0007801F0007801F0007801
-F0007801E000F003E000F003C000F0078000F00F0000F03C0000FFF00001E0300001E0380001E0
-1C0001E01C0001E01C0001E01E0003C03E0003C03E0003C03E0003C03E0003C03E0003C03E0207
-803E0407C01F04FFFC0F18000003E01F207E9E21>82 D<003F040060CC01803C03801C03001C07
-00180600080E00080E00080E00080E00000F00000F80000FE00007FE0003FF8001FFC0007FE000
-07E00001E00000E00000F00000F04000E04000E04000E04000E06000C0600180E00380F80300C6
-0C0081F80016217D9F19>I<3FFFFFF03C0780F03007803060078030400F0010400F0010C00F00
-10800F0010800F0010800F0010001E0000001E0000001E0000001E0000001E0000001E0000003C
-0000003C0000003C0000003C0000003C0000003C00000078000000780000007800000078000000
-7800000078000000F0000001F800007FFFE0001C1F7A9E21>I<FFFC3FF80F8007C00780030007
-8003000F0002000F0002000F0002000F0002000F0002000F0002001E0004001E0004001E000400
-1E0004001E0004001E0004003C0008003C0008003C0008003C0008003C0008003C000800380010
-003800100038001000380020003C0040001C0040001C0080000E0100000706000001F800001D20
-799E22>I<FFF07FF81FF01F000FC007C01F00078003000F00078003000F00078002000F000F80
-02000F000F8004000F001F8004000F0017C008000F8013C00800078023C01000078023C0100007
-8043C02000078043C02000078083C04000078083E0400007C101E0800003C101E0800003C201E1
-000003C201E1000003C401E2000003C401E2000003C801F4000003E800F4000001F000FC000001
-F000F8000001E000F8000001E000F0000001C000F0000001C00060000000C00060000000800040
-00002C207A9E2F>87 D<00FE01FC01800180018001800180030003000300030003000300060006
-0006000600060006000C000C000C000C000C000C00180018001800180018001800300030003000
-300030003000600060006000600060006000FE00FE000F2D7EA10D>91 D<00FE01FC000C000C00
-0C000C000C00180018001800180018001800300030003000300030003000600060006000600060
-006000C000C000C000C000C000C0018001800180018001800180030003000300030003000300FE
-00FE000F2D81A10D>93 D<07F8000C0C001E06001E07001C070000070000070000070000FF0007
-C7001E07003C0E00780E00F00E10F00E10F00E10F01E10F02E20784F401F878014147D9317>97
-D<0700003F00000F00000700000700000E00000E00000E00000E00000E00000E00001C00001C7C
-001D87001E03801C01C01C01C03801C03801E03801E03801E03801E03801E07003C07003C07003
-80700780700700700E00E81C00C4380083E00013207B9F19>I<01FC07060E0F1C0F380E780070
-00F000F000F000F000E000E000E000E000F0027004300818300FC010147C9314>I<0000700003
-F00000F00000700000700000E00000E00000E00000E00000E00000E00001C000F9C00305C00E03
-C01C03C03801C0780380700380F00380F00380F00380F00380E00700E00700E00700E00700E007
-00700F00301E00186F000F8FE014207C9F19>I<00F800070E000E07001C070038038078038070
-0380F00380F00380FFFF80F00000E00000E00000E00000E00000F001007002003004001C180007
-E00011147D9314>I<0007800018C00031E00061E000E1C000C00001C00001C00001C00001C000
-01C0000380007FF800038000038000038000038000070000070000070000070000070000070000
-0E00000E00000E00000E00000E00000E00001C00001E0000FFE00013207E9F0E>I<00000E003E
-1100E1A301C1C20381E00780E00701E00F01E00F01E00F01E00703C007038007870004FC000800
-000800001800001C00000FFF000FFFC007FFE01800F0300030600030C00030C00030C000306000
-603000C01C070007FC00181F809417>I<00E00007E00001E00000E00000E00001C00001C00001
-C00001C00001C00001C000038000038F800390E003A0E003C0600380600780E00700E00700E007
-00E00700E00700E00E01C00E01C00E01C00E01C00E01C00E01C01C03801E03C0FFCFF815207E9F
-19>I<01C003E003E003E001C000000000000000000000000003801F8007800380038007000700
-07000700070007000E000E000E000E000E000E001C001E00FF800B1F7F9E0C>I<0003800007C0
-0007C0000780000300000000000000000000000000000000000000000700007F00000F00000700
-000700000E00000E00000E00000E00000E00000E00001C00001C00001C00001C00001C00001C00
-003800003800003800003800003800003800007000607000F06000F0C0006180003F0000122883
-9E0E>I<00E00007E00001E00000E00000E00001C00001C00001C00001C00001C00001C0000380
-000383FC0380F00380C0038180038100070400070800071800073800077C00071C000E1C000E0E
-000E0E000E0F000E07000E07801C03801E07C0FF8FF016207E9F18>I<00E007E001E000E000E0
-01C001C001C001C001C001C00380038003800380038003800700070007000700070007000E000E
-000E000E000E000E001C001E00FFC00B207F9F0C>I<0387C07C001F9861860007A072070003C0
-34030003803803000780780700070070070007007007000700700700070070070007007007000E
-00E00E000E00E00E000E00E00E000E00E00E000E00E00E000E00E00E001C01C01C001E01E01E00
-FFCFFCFFC022147E9326>I<038F801F90E007A0E003C0600380600780E00700E00700E00700E0
-0700E00700E00E01C00E01C00E01C00E01C00E01C00E01C01C03801E03C0FFCFF815147E9319>
-I<00FC000387000E01801C00C03800E03800E07000F0F000F0F000F0F000F0F000F0E001E0E001
-E0E001C0E003C0F00380700700380E001C1C0007E00014147D9317>I<00E3E007EC3800F01C00
-E01E00E00E01C00E01C00F01C00F01C00F01C00F01C00F03801E03801E03801C03803C03803803
-80700740E00721C0071F000700000700000700000E00000E00000E00000E00001E0000FFC00018
-1D809319>I<00F040038CC00E04C01C03C03C03C0780380780380F00380F00380F00380F00380
-E00700E00700E00700F00700F00F00700F00301E00186E000F8E00000E00000E00000E00001C00
-001C00001C00001C00003C0001FF80121D7C9318>I<038E001FB38007C78003C7800383000780
-000700000700000700000700000700000E00000E00000E00000E00000E00000E00001C00001E00
-00FFE00011147E9312>I<01F2060E080618061802380438001E001FE00FF003F8003C401C400C
-400C600C6018E010D0608FC00F147E9312>I<0080010001000100030007000F001E00FFF80E00
-0E000E000E001C001C001C001C001C001C00380038203820382038203840384018800F000D1C7C
-9B12>I<1C0380FC1F803C07801C03801C0380380700380700380700380700380700380700700E
-00700E00700E00700E00701E00701E00703C00305E001F9FC012147B9319>I<FF83F81E00E01C
-00C01C00800E00800E01000E02000E02000F040007040007080007080007100003900003A00003
-E00003C00003800001800001000015147C9318>I<FF9FE1FC3E0780701C0300601C0300401C03
-80401C0380800E0780800E0581000E0981000E09C2000E11C2000731C4000721C4000760C80007
-40C8000780F0000780F0000300E00003006000020040001E147C9321>I<1FF0FF03C07801C060
-01C04000E08000E180007300007600003C00003C00001C00002E00004E00008700010700020380
-0603800C01C03E03E0FF07FC18147F9318>I<0FF83F8001E00E0001C00C0001C0080000E01800
-00E0100000E0200000E0200000F040000070400000708000007080000071000000390000003A00
-00003E0000003C00000038000000180000001000000010000000200000002000000040000070C0
-0000F0800000F1000000E20000007C000000191D809318>I<07FFE00701E00401C00C03800807
-00080E00101C0000380000700000700000E00001C0000380800700800E00801C01001C01003803
-00700E00FFFE0013147F9314>I E /Fg 4 12 df<F8000000FF80000007E0000000780000001C
-000000070000000380000000C0000000600000003000000018000000180000000C000000060000
-000600000003000000030000000180000001800000018000000180000000C0000000C0000000C0
-000000C0000000C0000000401A1B988132>8 D<00000040000000C0000000C0000000C0000000
-C0000000C000000180000001800000018000000180000003000000030000000600000006000000
-0C00000018000000180000003000000060000000C0000003800000070000001C00000078000007
-E00000FF800000F80000001A1B989A32>I<40000000C0000000C0000000C0000000C0000000C0
-000000600000006000000060000000300000003000000018000000180000000C00000006000000
-06000000030000000180000000C000000060000000380000001C0000000700000003C0000000F8
-0000003FE0000007E01B1B809A32>I<000007E000003FE00000F8000003C00000070000001C00
-00003800000060000000C00000018000000300000006000000060000000C000000180000001800
-00003000000030000000600000006000000060000000C0000000C0000000C0000000C0000000C0
-000000400000001B1B808132>I E /Fh 87 126 df<70F8F8F8F8F8F8F8F8F8F8F8F8F8F8F8F8
-70000000000070F8F8F870051C779B18>33 D<4010E038F078E038E038E038E038E038E038E038
-E038E038E03860300D0E7B9C18>I<030600078F00078F00078F00078F00078F00078F007FFFC0
-FFFFE0FFFFE07FFFC00F1E000F1E000F1E000F1E000F1E000F1E007FFFC0FFFFE0FFFFE07FFFC0
-1E3C001E3C001E3C001E3C001E3C001E3C000C1800131C7E9B18>I<3803007C07807C0780EE0F
-80EE0F00EE0F00EE1F00EE1E00EE1E00EE3E007C3C007C3C00387C0000780000780000F80000F0
-0001F00001E00001E00003E00003C00003C00007C0000783800787C00F87C00F0EE00F0EE01F0E
-E01E0EE01E0EE03E0EE03C07C03C07C018038013247E9F18>37 D<007000F001E003C007800F00
-1E001C00380038007000700070007000E000E000E000E000E000E000E000E00070007000700070
-00380038001C001E000F00078003C001F000F000700C24799F18>40 D<6000F00078003C001E00
-0F000780038001C001C000E000E000E000E00070007000700070007000700070007000E000E000
-E000E001C001C0038007800F001E003C007800F00060000C247C9F18>I<01C00001C00001C000
-01C000C1C180F1C780F9CF807FFF001FFC0007F00007F0001FFC007FFF00F9CF80F1C780C1C180
-01C00001C00001C00001C00011147D9718>I<00600000F00000F00000F00000F00000F00000F0
-0000F0007FFFC0FFFFE0FFFFE07FFFC000F00000F00000F00000F00000F00000F00000F0000060
-0013147E9718>I<1C3E7E7F3F1F070E1E7CF860080C788518>I<7FFF00FFFF80FFFF807FFF0011
-047D8F18>I<3078FCFC78300606778518>I<000300000780000780000F80000F00001F00001E00
-001E00003E00003C00007C0000780000780000F80000F00001F00001E00003E00003C00003C000
-07C0000780000F80000F00000F00001F00001E00003E00003C00003C00007C0000780000F80000
-F00000F0000060000011247D9F18>I<01F00007FC000FFE001F1F001C07003803807803C07001
-C07001C0E000E0E000E0E000E0E000E0E000E0E000E0E000E0E000E0E000E0F001E07001C07001
-C07803C03803801C07001F1F000FFE0007FC0001F000131C7E9B18>I<01800380038007800F80
-3F80FF80FB80438003800380038003800380038003800380038003800380038003800380038003
-807FFCFFFE7FFC0F1C7B9B18>I<03F0000FFE003FFF007C0F807003C0E001C0F000E0F000E060
-00E00000E00000E00001C00001C00003C0000780000F00001E00003C0000780000F00001E00007
-C0000F80001E00E03C00E07FFFE0FFFFE07FFFE0131C7E9B18>I<07F8001FFE003FFF00780780
-7803C07801C03001C00001C00003C0000380000F0003FF0003FE0003FF000007800003C00001C0
-0000E00000E00000E0F000E0F000E0F001C0F003C07C07803FFF001FFE0003F800131C7E9B18>
-I<001F00003F0000770000770000E70001E70001C7000387000787000707000E07001E07003C07
-00380700780700F00700FFFFF8FFFFF8FFFFF8000700000700000700000700000700000700007F
-F000FFF8007FF0151C7F9B18>I<1FFF803FFF803FFF8038000038000038000038000038000038
-00003800003800003BF8003FFE003FFF003C07801803C00001C00000E00000E06000E0F000E0F0
-00E0E001C07003C07C0F803FFF001FFC0003F000131C7E9B18>I<007E0001FF0007FF800F83C0
-1E03C01C03C0380180380000700000700000E1F800E7FE00FFFF00FE0780F803C0F001C0F000E0
-E000E0F000E07000E07000E07000E03801C03C03C01E07800FFF0007FE0001F800131C7E9B18>
-I<E00000FFFFE0FFFFE0FFFFE0E003C0E00780000700000E00001E00001C000038000038000070
-0000700000E00000E00000E00001C00001C00001C00001C00003C0000380000380000380000380
-00038000038000038000131D7E9C18>I<03F8000FFE001FFF003E0F803803807001C07001C070
-01C07001C03803803C07801FFF0007FC000FFE001F1F003C07807001C0F001E0E000E0E000E0E0
-00E0E000E07001C07803C03E0F801FFF000FFE0003F800131C7E9B18>I<03F0000FFC001FFE00
-3C0F00780780700380E001C0E001C0E001C0E001E0E001E07001E07803E03C0FE01FFFE00FFEE0
-03F0E00000E00001C00001C00001C0300380780780780F00783E003FFC001FF00007C000131C7E
-9B18>I<3078FCFC783000000000000000003078FCFC78300614779318>I<183C7E7E3C18000000
-0000000000183C7E7E3E1E0E1C3C78F060071A789318>I<000300000780001F80003F00007E00
-01FC0003F00007E0001FC0003F00007E0000FC0000FC00007E00003F00001FC00007E00003F000
-01FC00007E00003F00001F8000078000030011187D9918>I<7FFFC0FFFFE0FFFFE0FFFFE00000
-00000000000000000000FFFFE0FFFFE0FFFFE07FFFC0130C7E9318>I<600000F00000FC00007E
-00003F00001FC00007E00003F00001FC00007E00003F00001F80001F80003F00007E0001FC0003
-F00007E0001FC0003F00007E0000FC0000F0000060000011187D9918>I<0FF0003FFC007FFF00
-700F00F00380F00380600780000F00003E00007C0001F00001E00003C00003C00003C00003C000
-03C00003800000000000000000000000000000000003800007C00007C00007C000038000111C7D
-9B18>I<007C0001FE0007FF000F87801E03C03C1DC0387FC070FFE071E3E071C1E0E1C1E0E380
-E0E380E0E380E0E380E0E380E0E380E0E1C1C071C1C071E3C070FF80387F003C1C001E00E00F83
-E007FFC001FF80007E00131C7E9B18>I<00700000F80000F80000D80000D80001DC0001DC0001
-DC00018C00038E00038E00038E00038E000306000707000707000707000707000FFF800FFF800F
-FF800E03800E03801C01C01C01C07F07F0FF8FF87F07F0151C7F9B18>I<FFFC00FFFF00FFFF80
-1C03C01C01C01C00E01C00E01C00E01C00E01C01E01C01C01C07C01FFF801FFF001FFFC01C03C0
-1C00E01C00F01C00701C00701C00701C00701C00F01C00E01C03E0FFFFC0FFFF80FFFE00141C7F
-9B18>I<00F8E003FEE007FFE00F07E01E03E03C01E03800E07000E07000E0700000E00000E000
-00E00000E00000E00000E00000E00000E000007000007000E07000E03800E03C00E01E01C00F07
-C007FF8003FE0000F800131C7E9B18>I<7FF800FFFE007FFF001C0F801C03C01C03C01C01E01C
-00E01C00E01C00F01C00701C00701C00701C00701C00701C00701C00701C00701C00F01C00E01C
-00E01C01E01C01C01C03C01C0F807FFF00FFFE007FF800141C7F9B18>I<FFFFF0FFFFF0FFFFF0
-1C00701C00701C00701C00701C00001C00001C0E001C0E001C0E001FFE001FFE001FFE001C0E00
-1C0E001C0E001C00001C00001C00381C00381C00381C00381C0038FFFFF8FFFFF8FFFFF8151C7F
-9B18>I<FFFFE0FFFFE0FFFFE01C00E01C00E01C00E01C00E01C00001C00001C1C001C1C001C1C
-001FFC001FFC001FFC001C1C001C1C001C1C001C00001C00001C00001C00001C00001C00001C00
-00FFC000FFC000FFC000131C7E9B18>I<01F1C003FDC00FFFC01F0FC01C03C03803C03801C070
-01C07001C0700000E00000E00000E00000E00000E00000E00FF0E01FF0E00FF07001C07001C070
-03C03803C03803C01C07C01F0FC00FFFC003FDC001F1C0141C7E9B18>I<7F07F0FF8FF87F07F0
-1C01C01C01C01C01C01C01C01C01C01C01C01C01C01C01C01C01C01FFFC01FFFC01FFFC01C01C0
-1C01C01C01C01C01C01C01C01C01C01C01C01C01C01C01C01C01C07F07F0FF8FF87F07F0151C7F
-9B18>I<7FFF00FFFF807FFF0001C00001C00001C00001C00001C00001C00001C00001C00001C0
-0001C00001C00001C00001C00001C00001C00001C00001C00001C00001C00001C00001C00001C0
-007FFF00FFFF807FFF00111C7D9B18>I<01FFC003FFC001FFC0000E00000E00000E00000E0000
-0E00000E00000E00000E00000E00000E00000E00000E00000E00000E00000E00000E00000E0000
-0E00000E00F00E00F00E00F03C007FFC003FF0000FC000121C7D9B18>I<7F07F0FF87F87F07F0
-1C03C01C07801C07001C0E001C1E001C3C001C38001C70001CF0001DF0001DF0001FB8001FB800
-1F1C001E1C001C0E001C0E001C07001C07001C03801C03801C01C07F03F0FF87F87F03F0151C7F
-9B18>I<7FE000FFE0007FE0000E00000E00000E00000E00000E00000E00000E00000E00000E00
-000E00000E00000E00000E00000E00000E00000E00000E00000E00700E00700E00700E00700E00
-707FFFF0FFFFF07FFFF0141C7F9B18>I<FC01F8FE03F8FE03F83B06E03B06E03B06E03B06E03B
-8EE03B8EE0398CE0398CE039DCE039DCE039DCE038D8E038D8E038F8E03870E03870E03800E038
-00E03800E03800E03800E03800E0FE03F8FE03F8FE03F8151C7F9B18>I<7E07F0FF0FF87F07F0
-1D81C01D81C01D81C01DC1C01CC1C01CC1C01CE1C01CE1C01CE1C01C61C01C71C01C71C01C31C0
-1C39C01C39C01C39C01C19C01C19C01C1DC01C0DC01C0DC01C0DC07F07C0FF87C07F03C0151C7F
-9B18>I<0FF8003FFE007FFF00780F00700700F00780E00380E00380E00380E00380E00380E003
-80E00380E00380E00380E00380E00380E00380E00380E00380E00380E00380F00780700700780F
-007FFF003FFE000FF800111C7D9B18>I<FFFE00FFFF80FFFFC01C03C01C01E01C00E01C00701C
-00701C00701C00701C00701C00E01C01E01C03C01FFFC01FFF801FFE001C00001C00001C00001C
-00001C00001C00001C00001C0000FF8000FF8000FF8000141C7F9B18>I<7FF800FFFE007FFF00
-1C0F801C03801C03C01C01C01C01C01C01C01C03C01C03801C0F801FFF001FFE001FFE001C0F00
-1C07001C03801C03801C03801C03801C03801C039C1C039C1C039C7F01F8FF81F87F00F0161C7F
-9B18>82 D<03F3801FFF803FFF807C0F80700780E00380E00380E00380E000007000007800003F
-00001FF00007FE0000FF00000F800003C00001C00000E00000E06000E0E000E0E001E0F001C0F8
-0780FFFF80FFFE00E7F800131C7E9B18>I<7FFFF8FFFFF8FFFFF8E07038E07038E07038E07038
-007000007000007000007000007000007000007000007000007000007000007000007000007000
-00700000700000700000700000700007FF0007FF0007FF00151C7F9B18>I<FF83FEFF83FEFF83
-FE1C00701C00701C00701C00701C00701C00701C00701C00701C00701C00701C00701C00701C00
-701C00701C00701C00701C00701C00701C00700E00E00F01E00783C003FF8001FF00007C00171C
-809B18>I<FF07F8FF07F8FF07F81C01C01C01C01C01C01C01C00E03800E03800E03800E03800F
-0780070700070700070700070700038E00038E00038E00038E00018C0001DC0001DC0001DC0000
-D80000F80000F800007000151C7F9B18>I<FE03F8FE03F8FE03F87000707000707000703800E0
-3800E03800E03800E03800E038F8E038F8E039DCE039DCE019DCC019DCC019DCC0198CC01D8DC0
-1D8DC01D8DC01D8DC00D8D800D05800F07800F07800E0380151C7F9B18>I<7F8FE07F9FE07F8F
-E00E07000F0700070E00078E00039C0003DC0001F80001F80000F00000F00000700000F00000F8
-0001F80001DC00039E00038E00070F000707000E07800E03801E03C07F07F0FF8FF87F07F0151C
-7F9B18>I<FF07F8FF07F8FF07F81C01C01E03C00E03800F0780070700070700038E00038E0001
-DC0001DC0001DC0000F80000F80000700000700000700000700000700000700000700000700000
-700001FC0003FE0001FC00151C7F9B18>I<3FFFE07FFFE07FFFE07001C07003C0700780700700
-000F00001E00001C00003C0000780000700000F00001E00001C00003C0000780000700000F0000
-1E00E01C00E03C00E07800E07000E0FFFFE0FFFFE0FFFFE0131C7E9B18>I<FFF8FFF8FFF8E000
-E000E000E000E000E000E000E000E000E000E000E000E000E000E000E000E000E000E000E000E0
-00E000E000E000E000E000E000E000E000E000FFF8FFF8FFF80D24779F18>I<600000F00000F0
-0000F800007800007C00003C00003C00003E00001E00001F00000F00000F00000F800007800007
-C00003C00003C00003E00001E00001F00000F00000F800007800007800007C00003C00003E0000
-1E00001E00001F00000F00000F8000078000078000030011247D9F18>I<FFF8FFF8FFF8003800
-380038003800380038003800380038003800380038003800380038003800380038003800380038
-003800380038003800380038003800380038FFF8FFF8FFF80D247F9F18>I<018007C01FF07EFC
-F83EE00E0F067C9B18>I<7FFF00FFFF80FFFF807FFF0011047D7F18>I<1FE0003FF8007FFC0078
-1E00300E0000070000070000FF0007FF001FFF007F0700780700E00700E00700E00700F00F0078
-1F003FFFF01FFBF007E1F014147D9318>97 D<7E0000FE00007E00000E00000E00000E00000E00
-000E00000E3E000EFF800FFFC00FC1E00F80E00F00700E00700E00380E00380E00380E00380E00
-380E00380F00700F00700F80E00FC1E00FFFC00EFF80063E00151C809B18>I<01FE0007FF001F
-FF803E0780380300700000700000E00000E00000E00000E00000E00000E000007000007001C038
-01C03E03C01FFF8007FF0001FC0012147D9318>I<001F80003F80001F80000380000380000380
-00038000038003E3800FFB801FFF803C1F80380F80700780700380E00380E00380E00380E00380
-E00380E00380700780700780380F803C1F801FFFF00FFBF803E3F0151C7E9B18>I<01F00007FC
-001FFE003E0F00380780700380700380E001C0E001C0FFFFC0FFFFC0FFFFC0E000007000007001
-C03801C03E03C01FFF8007FF0001FC0012147D9318>I<001F80007FC000FFE000E1E001C0C001
-C00001C00001C0007FFFC0FFFFC0FFFFC001C00001C00001C00001C00001C00001C00001C00001
-C00001C00001C00001C00001C00001C00001C0007FFF007FFF007FFF00131C7F9B18>I<01E1F0
-07FFF80FFFF81E1E301C0E003807003807003807003807003807001C0E001E1E001FFC001FF800
-39E0003800001C00001FFE001FFFC03FFFE07801F0700070E00038E00038E00038E000387800F0
-7E03F01FFFC00FFF8001FC00151F7F9318>I<7E0000FE00007E00000E00000E00000E00000E00
-000E00000E3E000EFF800FFFC00FC1C00F80E00F00E00E00E00E00E00E00E00E00E00E00E00E00
-E00E00E00E00E00E00E00E00E00E00E07FC3FCFFE7FE7FC3FC171C809B18>I<03800007C00007
-C00007C0000380000000000000000000000000007FC000FFC0007FC00001C00001C00001C00001
-C00001C00001C00001C00001C00001C00001C00001C00001C00001C00001C000FFFF00FFFF80FF
-FF00111D7C9C18>I<0038007C007C007C003800000000000000000FFC1FFC0FFC001C001C001C
-001C001C001C001C001C001C001C001C001C001C001C001C001C001C001C001C001C001C001C60
-38F078FFF07FE03F800E277E9C18>I<FE0000FE0000FE00000E00000E00000E00000E00000E00
-000E3FF00E7FF00E3FF00E07800E0F000E1E000E3C000E78000EF0000FF8000FFC000F9C000F0E
-000E0F000E07000E03800E03C0FFC7F8FFC7F8FFC7F8151C7F9B18>I<7FE000FFE0007FE00000
-E00000E00000E00000E00000E00000E00000E00000E00000E00000E00000E00000E00000E00000
-E00000E00000E00000E00000E00000E00000E00000E00000E0007FFFC0FFFFE07FFFC0131C7E9B
-18>I<7CE0E000FFFBF8007FFFF8001F1F1C001E1E1C001E1E1C001C1C1C001C1C1C001C1C1C00
-1C1C1C001C1C1C001C1C1C001C1C1C001C1C1C001C1C1C001C1C1C001C1C1C007F1F1F00FFBFBF
-807F1F1F001914819318>I<7E3E00FEFF807FFFC00FC1C00F80E00F00E00E00E00E00E00E00E0
-0E00E00E00E00E00E00E00E00E00E00E00E00E00E00E00E07FC3FCFFE7FE7FC3FC1714809318>
-I<01F0000FFE001FFF003E0F803803807001C07001C0E000E0E000E0E000E0E000E0E000E0F001
-E07001C07803C03C07803E0F801FFF000FFE0001F00013147E9318>I<7E3E00FEFF807FFFC00F
-C1E00F80E00F00700E00700E00380E00380E00380E00380E00380E00380F00700F00700F80E00F
-C1E00FFFC00EFF800E3E000E00000E00000E00000E00000E00000E00000E00007FC000FFE0007F
-C000151E809318>I<7F87E0FF9FF07FBFF803F87803F03003E00003C00003C000038000038000
-0380000380000380000380000380000380000380007FFE00FFFF007FFE0015147F9318>114
-D<07F7003FFF007FFF00780F00E00700E00700E007007C00007FE0001FFC0003FE00001F006007
-80E00380E00380F00380F80F00FFFF00FFFC00E7F00011147D9318>I<01800003800003800003
-80000380007FFFC0FFFFC0FFFFC003800003800003800003800003800003800003800003800003
-80000380400380E00380E00380E001C1C001FFC000FF80003E0013197F9818>I<7E07E0FE0FE0
-7E07E00E00E00E00E00E00E00E00E00E00E00E00E00E00E00E00E00E00E00E00E00E00E00E00E0
-0E01E00F03E007FFFC03FFFE01FCFC1714809318>I<7F8FF0FF8FF87F8FF01E03C00E03800E03
-800E0380070700070700070700038E00038E00038E00038E0001DC0001DC0001DC0000F80000F8
-0000700015147F9318>I<FF8FF8FF8FF8FF8FF83800E03800E03800E01C01C01C01C01C71C01C
-F9C01CF9C01CD9C01CD9C00DDD800DDD800DDD800D8D800F8F800F8F8007070015147F9318>I<
-7F8FF07F9FF07F8FF0070700078E00039E0001DC0001F80000F80000700000F00000F80001DC00
-039E00038E000707000F07807F8FF0FF8FF87F8FF015147F9318>I<7F8FF0FF8FF87F8FF00E01
-C00E03800E0380070380070700070700038700038600038E0001CE0001CE0000CC0000CC0000DC
-0000780000780000780000700000700000700000F00000E00079E0007BC0007F80003F00001E00
-00151E7F9318>I<3FFFF07FFFF07FFFF07001E07003C0700780000F00001E00003C0000F80001
-F00003C0000780000F00701E00703C0070780070FFFFF0FFFFF0FFFFF014147F9318>I<0007E0
-001FE0007FE000780000E00000E00000E00000E00000E00000E00000E00000E00000E00000E000
-00E00001E0007FC000FF8000FF80007FC00001E00000E00000E00000E00000E00000E00000E000
-00E00000E00000E00000E00000E000007800007FE0001FE00007E013247E9F18>I<60F0F0F0F0
-F0F0F0F0F0F0F0F0F0F0F0F0F0F0F0F0F0F0F0F0F0F0F0F0F0F0F0F0F0F0600424769F18>I<7C
-0000FF0000FFC00003C00000E00000E00000E00000E00000E00000E00000E00000E00000E00000
-E00000E00000F000007FC0003FE0003FE0007FC000F00000E00000E00000E00000E00000E00000
-E00000E00000E00000E00000E00000E00003C000FFC000FF00007C000013247E9F18>I
-E /Fi 25 121 df<0001C0000003C000000FC000007FC0001FFFC000FFFFC000FFBFC000E03FC0
-00003FC000003FC000003FC000003FC000003FC000003FC000003FC000003FC000003FC000003F
-C000003FC000003FC000003FC000003FC000003FC000003FC000003FC000003FC000003FC00000
-3FC000003FC000003FC000003FC000003FC000003FC000003FC000003FC000003FC000003FC000
-003FC000003FC000003FC000003FC000003FC000003FC0007FFFFFE07FFFFFE07FFFFFE01B2E7A
-AD28>49 D<003FE00001FFFE0007FFFF800F80FFC01E003FE038001FF07C000FF87E0007FCFF00
-07FCFF8007FEFF8007FEFF8003FEFF8003FE7F0003FE3E0007FE000007FE000007FC000007FC00
-000FF800000FF800000FF000001FE000001FC000003F8000007F0000007E000000F8000001F000
-0003E0000007C000000F0000001E000E003C000E0038000E0070001E00E0001C01C0001C030000
-3C07FFFFFC0FFFFFFC1FFFFFFC3FFFFFFC7FFFFFF8FFFFFFF8FFFFFFF8FFFFFFF81F2E7CAD28>
-I<001FF80000007FFF000001FFFFC00003E03FE00007800FF0000FC00FF8001FE007F8001FE007
-FC001FE007FC001FE007FC001FE007FC000FC007FC00078007FC0000000FF80000000FF8000000
-0FF00000001FE00000001FC00000003F80000000FE0000003FF80000003FFF800000001FE00000
-0007F000000007F800000003FC00000003FE00000001FF00000001FF00000001FF80000001FF80
-000001FF801C0001FF803E0001FF807F0001FF80FF8001FF80FF8001FF00FF8001FF00FF8003FE
-007F0003FE007E0007FC003C0007F8001FC01FF0000FFFFFC00003FFFF0000003FF80000212E7D
-AD28>I<FFFFFFFFE00000FFFFFFFFFE0000FFFFFFFFFF800000FF0000FFC00000FF00003FF000
-00FF00001FF80000FF00000FF80000FF000007FC0000FF000007FC0000FF000007FE0000FF0000
-03FE0000FF000003FE0000FF000003FE0000FF000003FE0000FF000007FE0000FF000007FE0000
-FF000007FC0000FF000007FC0000FF00000FF80000FF00001FF00000FF00003FE00000FF0000FF
-800000FF000FFF000000FFFFFFFE000000FFFFFFFFC00000FF00001FF00000FF000007F80000FF
-000003FE0000FF000003FE0000FF000001FF0000FF000001FF8000FF000000FF8000FF000000FF
-C000FF000000FFC000FF000000FFC000FF000000FFC000FF000000FFC000FF000000FFC000FF00
-0000FFC000FF000000FF8000FF000001FF8000FF000001FF0000FF000003FF0000FF000007FE00
-00FF00000FFC0000FF00007FF800FFFFFFFFFFE000FFFFFFFFFF8000FFFFFFFFFC000032317EB0
-39>66 D<000003FF80018000003FFFF003800001FFFFFC07800007FF003F0F80001FF800079F80
-003FC00001FF8000FF800000FF8001FE0000007F8003FC0000003F8007FC0000001F8007F80000
-000F800FF00000000F801FF000000007801FF000000007803FE000000007803FE000000003807F
-E000000003807FE000000003807FC000000000007FC00000000000FFC00000000000FFC0000000
-0000FFC00000000000FFC00000000000FFC00000000000FFC00000000000FFC00000000000FFC0
-0000000000FFC000000000007FC000000000007FC000000000007FE000000000007FE000000003
-803FE000000003803FE000000003801FF000000003801FF000000007800FF0000000070007F800
-0000070007FC0000000E0003FC0000001E0001FE0000001C0000FF8000007800003FC00000F000
-001FF80003E0000007FF003F80000001FFFFFE000000003FFFF80000000003FF80000031317CB0
-3A>I<FFFFFFFFF00000FFFFFFFFFF0000FFFFFFFFFFC00000FF8000FFF00000FF80000FF80000
-FF800003FE0000FF800001FF0000FF800000FF8000FF8000007FC000FF8000003FC000FF800000
-1FE000FF8000001FF000FF8000000FF000FF8000000FF800FF8000000FF800FF80000007FC00FF
-80000007FC00FF80000007FC00FF80000007FC00FF80000007FE00FF80000007FE00FF80000007
-FE00FF80000007FE00FF80000007FE00FF80000007FE00FF80000007FE00FF80000007FE00FF80
-000007FE00FF80000007FE00FF80000007FE00FF80000007FC00FF80000007FC00FF80000007FC
-00FF80000007FC00FF8000000FF800FF8000000FF800FF8000000FF000FF8000001FF000FF8000
-001FE000FF8000003FE000FF8000007FC000FF8000007F8000FF800001FF0000FF800003FE0000
-FF80000FFC0000FF80007FF000FFFFFFFFFFC000FFFFFFFFFF0000FFFFFFFFF0000037317EB03E
->I<FFFFFFFFFFE0FFFFFFFFFFE0FFFFFFFFFFE000FF80007FE000FF80000FF000FF800003F000
-FF800001F000FF800001F000FF800000F000FF800000F000FF8000007000FF8000007000FF8000
-007000FF8000003800FF8000003800FF8007003800FF8007003800FF8007000000FF8007000000
-FF8007000000FF800F000000FF801F000000FF803F000000FFFFFF000000FFFFFF000000FFFFFF
-000000FF803F000000FF801F000000FF800F000000FF8007000000FF8007000000FF8007000000
-FF8007000000FF8007000000FF8000000000FF8000000000FF8000000000FF8000000000FF8000
-000000FF8000000000FF8000000000FF8000000000FF8000000000FF8000000000FF8000000000
-FF80000000FFFFFFE00000FFFFFFE00000FFFFFFE000002D317EB033>70
-D<FFFFFF80FFFFFF80FFFFFF8000FF800000FF800000FF800000FF800000FF800000FF800000FF
-800000FF800000FF800000FF800000FF800000FF800000FF800000FF800000FF800000FF800000
-FF800000FF800000FF800000FF800000FF800000FF800000FF800000FF800000FF800000FF8000
-00FF800000FF800000FF800000FF800000FF800000FF800000FF800000FF800000FF800000FF80
-0000FF800000FF800000FF800000FF800000FF800000FF800000FF8000FFFFFF80FFFFFF80FFFF
-FF8019317EB01E>73 D<7FFFFFFFFFFF007FFFFFFFFFFF007FFFFFFFFFFF007FC00FF801FF007E
-000FF8003F007C000FF8001F0078000FF8000F0078000FF8000F0070000FF8000700F0000FF800
-0780F0000FF8000780F0000FF8000780E0000FF8000380E0000FF8000380E0000FF8000380E000
-0FF8000380E0000FF800038000000FF800000000000FF800000000000FF800000000000FF80000
-0000000FF800000000000FF800000000000FF800000000000FF800000000000FF800000000000F
-F800000000000FF800000000000FF800000000000FF800000000000FF800000000000FF8000000
-00000FF800000000000FF800000000000FF800000000000FF800000000000FF800000000000FF8
-00000000000FF800000000000FF800000000000FF800000000000FF800000000000FF800000000
-000FF800000000000FF8000000007FFFFFFF0000007FFFFFFF0000007FFFFFFF000031307DAF38
->84 D<00FFF0000003FFFE00000F803F80000FC00FE0001FE007F0001FE007F0001FE003F8000F
-C003FC00078003FC00000003FC00000003FC00000003FC00000003FC000000FFFC00001FFFFC00
-00FFE3FC0003FC03FC000FF003FC001FC003FC003FC003FC007F8003FC007F8003FC00FF0003FC
-00FF0003FC00FF0003FC00FF0007FC00FF0007FC007F800DFC003FC019FE001FE070FFF007FFE0
-7FF000FF803FF024207E9F27>97 D<01F8000000FFF8000000FFF8000000FFF80000000FF80000
-0007F800000007F800000007F800000007F800000007F800000007F800000007F800000007F800
-000007F800000007F800000007F800000007F800000007F800000007F83FE00007F8FFFC0007FB
-E07F0007FF001F8007FE000FC007FC000FE007F80007F007F80007F807F80007F807F80003FC07
-F80003FC07F80003FC07F80003FE07F80003FE07F80003FE07F80003FE07F80003FE07F80003FE
-07F80003FE07F80003FE07F80003FC07F80003FC07F80003FC07F80007F807F80007F807F80007
-F007FC000FE007FE000FC007E7003F8007C3C0FE000780FFF80007003FC00027327EB12D>I<00
-0FFF00007FFFC001FC01F003F003F007E007F80FE007F81FC007F83FC003F03FC001E07F800000
-7F8000007F800000FF800000FF800000FF800000FF800000FF800000FF800000FF800000FF8000
-007F8000007F8000007F8000003FC0001C3FC0001C1FC000380FE0003807E0007003F001E001FC
-07C0007FFF00000FF8001E207D9F24>I<0000000FC0000007FFC0000007FFC0000007FFC00000
-007FC00000003FC00000003FC00000003FC00000003FC00000003FC00000003FC00000003FC000
-00003FC00000003FC00000003FC00000003FC00000003FC00000003FC00007F83FC0003FFF3FC0
-00FE07BFC003F801FFC007E0007FC00FE0007FC01FC0003FC03FC0003FC03FC0003FC07F80003F
-C07F80003FC07F80003FC0FF80003FC0FF80003FC0FF80003FC0FF80003FC0FF80003FC0FF8000
-3FC0FF80003FC0FF80003FC07F80003FC07F80003FC07F80003FC03FC0003FC03FC0003FC01FC0
-003FC00FE0007FC007E000FFC003F003FFE001FC0F3FFE007FFE3FFE000FF03FFE27327DB12D>
-I<000FFC00007FFF8001FC0FC003F003E007E001F00FE001F81FC000FC3FC000FE3FC000FE7F80
-007E7F80007F7F80007FFF80007FFF80007FFFFFFFFFFFFFFFFFFF800000FF800000FF800000FF
-8000007F8000007F8000007F8000003FC000071FC000071FC0000E0FE0000E07F0001C03F80078
-00FE03E0003FFFC00007FE0020207E9F25>I<0001FE00000FFF80001FC3C0007F07E000FE0FF0
-01FE0FF001FC0FF003FC0FF003FC07E003FC018003FC000003FC000003FC000003FC000003FC00
-0003FC000003FC000003FC0000FFFFFC00FFFFFC00FFFFFC0003FC000003FC000003FC000003FC
-000003FC000003FC000003FC000003FC000003FC000003FC000003FC000003FC000003FC000003
-FC000003FC000003FC000003FC000003FC000003FC000003FC000003FC000003FC000003FC0000
-03FC000003FC000003FC00007FFFF0007FFFF0007FFFF0001C327EB119>I<03C00007E0000FF0
-001FF8001FF8001FF8001FF8000FF00007E00003C0000000000000000000000000000000000000
-0000000000000000000001F800FFF800FFF800FFF8000FF80007F80007F80007F80007F80007F8
-0007F80007F80007F80007F80007F80007F80007F80007F80007F80007F80007F80007F80007F8
-0007F80007F80007F80007F80007F80007F800FFFF80FFFF80FFFF8011337DB217>105
-D<01F8000000FFF8000000FFF8000000FFF80000000FF800000007F800000007F800000007F800
-000007F800000007F800000007F800000007F800000007F800000007F800000007F800000007F8
-00000007F800000007F800000007F801FFF807F801FFF807F801FFF807F8003F0007F8003C0007
-F800780007F800F00007F803C00007F807800007F80F000007F81E000007F878000007F8FC0000
-07F9FE000007FBFE000007FFFF000007FE7F800007FC7FC00007F83FC00007F01FE00007F00FF0
-0007F00FF80007F007FC0007F003FC0007F001FE0007F000FF0007F000FF8007F0007F8007F000
-7FC0FFFF81FFFEFFFF81FFFEFFFF81FFFE27327EB12B>107 D<01F800FFF800FFF800FFF8000F
-F80007F80007F80007F80007F80007F80007F80007F80007F80007F80007F80007F80007F80007
-F80007F80007F80007F80007F80007F80007F80007F80007F80007F80007F80007F80007F80007
-F80007F80007F80007F80007F80007F80007F80007F80007F80007F80007F80007F80007F80007
-F80007F80007F80007F800FFFFC0FFFFC0FFFFC012327DB117>I<03F007F800FFF03FFE00FFF0
-783F00FFF0C03F800FF1801FC007F3001FC007F6001FE007FC001FE007FC001FE007FC001FE007
-F8001FE007F8001FE007F8001FE007F8001FE007F8001FE007F8001FE007F8001FE007F8001FE0
-07F8001FE007F8001FE007F8001FE007F8001FE007F8001FE007F8001FE007F8001FE007F8001F
-E007F8001FE007F8001FE007F8001FE0FFFFC3FFFFFFFFC3FFFFFFFFC3FFFF28207D9F2D>110
-D<0007FC0000007FFFC00001FC07F00003F001F80007E000FC000FC0007E001FC0007F003FC000
-7F803F80003F807F80003FC07F80003FC07F80003FC0FF80003FE0FF80003FE0FF80003FE0FF80
-003FE0FF80003FE0FF80003FE0FF80003FE0FF80003FE07F80003FC07F80003FC07F80003FC03F
-C0007F803FC0007F801FC0007F000FE000FE0007E000FC0003F803F80001FE0FF000007FFFC000
-0007FC000023207E9F28>I<03F03F00FFF07FC0FFF1C3E0FFF187E00FF30FF007F60FF007F60F
-F007FC07E007FC03C007FC000007FC000007F8000007F8000007F8000007F8000007F8000007F8
-000007F8000007F8000007F8000007F8000007F8000007F8000007F8000007F8000007F8000007
-F8000007F8000007F80000FFFFE000FFFFE000FFFFE0001C207E9F21>114
-D<01FF860007FFFE001F00FE003C003E0078001E0078000E00F8000E00F8000E00F8000E00FC00
-0000FF800000FFFC00007FFFC0007FFFF0003FFFF8001FFFFC0007FFFE0001FFFF00003FFF0000
-00FF8000003F8060001F80E0000F80E0000F80F0000F80F0000F00F8000F00FC001E00FE001C00
-FF807800F3FFF000C07F800019207D9F20>I<001C0000001C0000001C0000001C0000001C0000
-003C0000003C0000003C0000007C0000007C000000FC000001FC000003FC000007FC00001FFFFE
-00FFFFFE00FFFFFE0003FC000003FC000003FC000003FC000003FC000003FC000003FC000003FC
-000003FC000003FC000003FC000003FC000003FC000003FC000003FC000003FC000003FC038003
-FC038003FC038003FC038003FC038003FC038003FC038001FC038001FC070000FE0700007F0E00
-003FFC000007F000192E7FAD1F>I<01F80007E0FFF803FFE0FFF803FFE0FFF803FFE00FF8003F
-E007F8001FE007F8001FE007F8001FE007F8001FE007F8001FE007F8001FE007F8001FE007F800
-1FE007F8001FE007F8001FE007F8001FE007F8001FE007F8001FE007F8001FE007F8001FE007F8
-001FE007F8001FE007F8001FE007F8001FE007F8003FE007F8003FE003F8007FE003F8007FE001
-FC00DFF000FE039FFF007FFF1FFF000FFC1FFF28207D9F2D>I<7FFF807FFC7FFF807FFC7FFF80
-7FFC03FE000F0001FE001E0000FF003C0000FF807800007FC07800003FE0F000001FE1E000000F
-F3C000000FFF80000007FF00000003FE00000001FE00000000FF00000000FF80000000FFC00000
-01FFC0000003DFE00000078FF00000078FF800000F07FC00001E03FC00003C01FE00007800FF00
-00F000FF8000E0007FC001E0003FC0FFFC01FFFFFFFC01FFFFFFFC01FFFF28207F9F2B>120
-D E /Fj 18 117 df<387CFEFEFE7C3807077D860D>46 D<03F0000FFC001F3E003E1F003C0F00
-7C0F807C0F807C0F80FC0FC0FC0FC0FC0FC0FC0FC0FC0FC0FC0FC0FC0FC0FC0FC0FC0FC0FC0FC0
-FC0FC0FC0FC0FC0FC07C0F807C0F807C0F803C0F003E1F001F3E000FFC0003F000121D7E9C17>
-48 D<00E001E00FE0FFE0F3E003E003E003E003E003E003E003E003E003E003E003E003E003E0
-03E003E003E003E003E003E003E003E003E07FFF7FFF101D7D9C17>I<07F0001FFC00387E007C
-3F00FE1F80FE1F80FE1FC0FE0FC07C0FC0380FC0001FC0001F80001F80003F00003E00007C0000
-780000E00001C0000380000700C00600C00C00C01801C03FFF803FFF807FFF80FFFF80FFFF8012
-1D7E9C17>I<07F0000FFC001C3E003C3F007E1F807E1F807E1F807E1F803C3F00003F00003E00
-007C0003F80003F000003C00003F00001F80001F80001FC0381FC07C1FC0FE1FC0FE1FC0FE1F80
-FC1F80783F00383E001FFC0007F000121D7E9C17>I<000700000F00000F00001F00003F00003F
-00006F0000EF0001CF00018F00038F00070F00060F000C0F001C0F00380F00300F00700F00E00F
-00FFFFF0FFFFF0001F00001F00001F00001F00001F00001F0001FFF001FFF0141D7F9C17>I<38
-03003FFF003FFE003FFC003FF8003FE0003F000030000030000030000030000033F00037FC003C
-1E00380F00100F80000F80000FC0000FC0780FC0FC0FC0FC0FC0FC0FC0FC0F80780F80601F0038
-3E001FFC0007E000121D7E9C17>I<00FC0003FE000783000F0F801E1F803E1F803C1F807C1F80
-7C0F007C0000FC0000FDFC00FFFE00FE0F00FE0F80FC0F80FC0FC0FC0FC0FC0FC0FC0FC0FC0FC0
-7C0FC07C0FC07C0F803C0F803E0F001E1E000FFC0003F000121D7E9C17>I<6000007FFFC07FFF
-C07FFF807FFF007FFE00E00600C00C00C01800C0180000300000600000E00000E00001E00001C0
-0003C00003C00003C00007C00007C00007C0000FC0000FC0000FC0000FC0000FC0000FC0000780
-00030000121E7D9D17>I<03F0000FFC001E1E00380F003807807807807807807C07807E07807F
-0F003FCE003FFC001FF8000FFE000FFF001FFF003C7F80783FC0700FC0F007C0F003C0F003C0F0
-03C0F003807803807807003E0E001FFC0007F000121D7E9C17>I<03F0000FFC001E1E003C1F00
-7C0F007C0F80FC0F80FC0F80FC0FC0FC0FC0FC0FC0FC0FC0FC0FC07C0FC07C1FC03C1FC01FFFC0
-0FEFC0000FC0000F803C0F807E0F807E0F007E1F007E1E007C3C003878001FF0000FC000121D7E
-9C17>I<07F0001FFC003F1E003F1F003F0F803F0F800C0F80000F8000FF800FFF801F0F807C0F
-807C0F80F80F80F80F80F80F80F817807C37803FE3F00F81F014147F9316>97
-D<FF0000FF00001F00001F00001F00001F00001F00001F00001F00001F00001F00001F00001F3F
-001FFF801FC3C01F01E01F01F01F01F01F01F81F01F81F01F81F01F81F01F81F01F81F01F81F01
-F81F01F01F01F01F03E01FC7C01CFF80183E0015207F9F19>I<03F00FFC1E7E3E7E7C7E7C7EFC
-18FC00FC00FC00FC00FC00FC00FC007C007E033E031F0E0FFC03F010147E9314>I<1C003E007F
-007F007F003E001C00000000000000000000000000FF00FF001F001F001F001F001F001F001F00
-1F001F001F001F001F001F001F001F001F00FFE0FFE00B217FA00C>105
-D<FE0F80F800FE3FC3FC001E63E63E001EC1FC1F001E81F81F001F01F01F001F01F01F001F01F0
-1F001F01F01F001F01F01F001F01F01F001F01F01F001F01F01F001F01F01F001F01F01F001F01
-F01F001F01F01F001F01F01F00FFE7FE7FE0FFE7FE7FE023147E9326>109
-D<FF3F00FFFF801FC7C01F03E01F03F01F01F01F01F81F01F81F01F81F01F81F01F81F01F81F01
-F81F01F81F01F01F03F01F03E01FC7C01FFF801F3E001F00001F00001F00001F00001F00001F00
-001F0000FFE000FFE000151D7F9319>112 D<0300030003000300070007000F000F003F00FFF8
-FFF81F001F001F001F001F001F001F001F001F001F001F181F181F181F181F180F3007F003E00D
-1D7F9C12>116 D E /Fk 34 122 df<F0F0F0F004047D830A>46 D<01800780FF80FF800F800F
-800F800F800F800F800F800F800F800F800F800F800F800F800F800F800F807FE07FE00B177D96
-12>49 D<1F803FC07FE0F1F0F0F860F820F800F800F800F001F001E003C0078007000E001E001C
-0038007000FFF8FFF87FF80D177E9612>I<1F803FC07FE0F1F061F041F001F001F001E003C00F
-800FC001E000F000F800F800F880F8C0F8E1F07FF03FE01F800D177E9612>I<3FF83FF83FF83E
-003E003E003E003E003E003FE03FF03C783878007C007C007C007C407C607CF0F87FF03FE00FC0
-0E177F9612>53 D<F0F0F0F000000000000000F0F0F0F0040F7D8E0A>58
-D<01FC0001FC0003FE0003FE0003DE0007DF0007DF00079F00078F000F8F800F8F800F0F801F07
-C01F07C01F07C03FFFE03FFFE03FFFE07C03F07C01F07C01F0F801F8F800F815177F9618>65
-D<7FF800FFFE00FFFF00F81F00F80F80F80F80F80F80F80F80F80F80F81F00FFFE00FFFE00F81F
-80F80F80F807C0F807C0F807C0F807C0F807C0F81F80FFFF80FFFF007FFC0012177D9618>I<01
-FF0007FFC00FFFC01F83C03E00807C00007C0000F80000F80000F80000F80000F80000F80000F8
-0000F80000F800007C00007C00403E00C01F81C00FFFC007FF8001FE0012177E9617>I<7FF800
-FFFF00FFFF80F81FC0F807C0F803E0F803E0F801F0F801F0F801F0F801F0F801F0F801F0F801F0
-F801F0F801F0F803E0F803E0F807E0F80FC0FFFF80FFFF007FF80014177D961A>I<7FFCFFFCFF
-FCF800F800F800F800F800F800F800FFF8FFF8FFF8F800F800F800F800F800F800F800F800F800
-78000E177D9614>70 D<78F8F8F8F8F8F8F8F8F8F8F8F8F8F8F8F8F8F8F8F8F87805177D960B>
-73 D<7FF800FFFE00FFFF00F81F00F80F80F80F80F80F80F80F80F80F80F81F00FFFE00FFF800
-F8F800F8F800F87C00F87C00F83E00F83E00F81F00F81F00F80F80F80F807807C012177D9617>
-82 D<7FFFF8FFFFF8FFFFF800F80000F80000F80000F80000F80000F80000F80000F80000F800
-00F80000F80000F80000F80000F80000F80000F80000F80000F80000F80000780015177F9618>
-84 D<0FC03FF030F820F800F800F81FF83EF878F8F8F8F8F8F8F879F87FF81EF80D0F7F8E11>
-97 D<7800F800F800F800F800F800F800F800FBE0FFF8F87CF83CF83EF83EF83EF83EF83EF83E
-F83EF83CF878FFF07BE00F177E9613>I<0FE01FF83C387808F800F800F800F800F800F800F800
-78083C381FF80FE00D0F7F8E10>I<003E003E003E003E003E003E003E003E0FBE1FFE3C3E783E
-F83EF83EF83EF83EF83EF83EF83E783E7C3E3FFE0FBE0F177F9613>I<0FC01FF03C787878F83C
-F83CFFFCFFFCF800F800780078043C1C1FFC07F00E0F7F8E11>I<03F00FF00F101F001F001F00
-1F001F007F80FF801F001F001F001F001F001F001F001F001F001F001F001F000F000C1780960B
->I<1FCE3FFE78F0F8F8F8F8F8F8F8F878F03FE07FC0600060007FF07FF83FFC7FFEE00EE00EE0
-0E701C3FF81FF00F167F8E12>I<7800F800F800F800F800F800F800F800F9F0FBF8FE7CFC7CF8
-7CF87CF87CF87CF87CF87CF87CF87CF87CF87C787C0E177E9613>I<F0F8F8F8F00000000078F8
-F8F8F8F8F8F8F8F8F8F8F8F87805187F9708>I<7000F000F000F000F000F000F000F000F078F0
-F8F3E0F7C0FF80FF00FF00FF80FFC0F3E0F1E0F0F0F0F8F07C703C0E177E9612>107
-D<79F0FBF8FE7CFC7CF87CF87CF87CF87CF87CF87CF87CF87CF87CF87C787C0E0F7E8E13>110
-D<0FE03FF87C7C783CF83EF83EF83EF83EF83EF83EF83E783C7C7C3FF80FE00F0F7F8E12>I<7B
-E0FFF8F87CF87CF83EF83EF83EF83EF83EF83EF83EF87CF878FFF0FBE0F800F800F800F800F800
-78000F157E8E13>I<7BFFFFFCF8F8F8F8F8F8F8F8F8F878080F7E8E0C>114
-D<1F007FC0E0C0E040E000FE00FF807FC03FE007E0C0E0C0E0F0E07FC01F000B0F7F8E0E>I<1E
-003E003E003E003E007F80FF803E003E003E003E003E003E003E003E003E003E003E403FC01F00
-0A147F930D>I<787CF87CF87CF87CF87CF87CF87CF87CF87CF87CF87CF87CF8FC7FFC3E7C0E0F
-7E8E13>I<F03CF03CF03C7878787878783CF03CF03CF03EF01FE01FE01FE00FC00FC00E0F7F8E
-11>I<F03CF8787CF03DF01FE00FC0078007800FC01FE01DE03CF07878F07CF03C0E0F7F8E11>
-120 D<F03CF03C783C78787C783C783C701EF01EF00EE00FE007E007C007C003C0038003808780
-FF00FE00FC000E157F8E11>I E /Fl 14 117 df<70F8F8F0E005057B840E>46
-D<000F800030E000E07001C0700380300380380700380F00780F00780E00781E00781E00703C00
-F03C00F03C00F03C00F07801E07801E07801E07801C07003C0F003C0F00380F00780F007007007
-00700E00701C003038001870000FC000151F7C9D17>48 D<000200020006000E003C00DC031C00
-1C0038003800380038007000700070007000E000E000E000E001C001C001C001C0038003800380
-03800780FFF80F1E7B9D17>I<00C06000FFC001FF8001FE000100000100000200000200000200
-00020000040000047800058C000606000C0700080700000780000780000780000780000F00700F
-00F00F00F00E00E01E00801C0080380080300040600061C0001F0000131F7B9D17>53
-D<001F0000718000C0C00180C00380E00700E00F00E00F01E01E01E01E01E01E01E01E01C01C03
-C01C03C01C03C01C07C01C0F800C0F8006378003C700000F00000E00000E00001C00601C00F038
-00F07000E0600080C0004380003E0000131F7B9D17>57 D<01FFFFC0001E00F0001E0078001E00
-38001E003C003C003C003C003C003C003C003C003C0078007800780078007800F0007801E000F0
-078000FFFE0000F00F8000F003C001E001C001E001E001E001E001E001E003C001E003C001E003
-C001E003C001C0078003C00780078007800F0007801E000F007800FFFFE0001E1F7D9E20>66
-D<01FFFF80001E00E0001E0070001E0038001E001C003C001C003C000E003C000E003C000E0078
-000E0078000E0078000E0078000E00F0001E00F0001E00F0001E00F0001E01E0003C01E0003C01
-E0003C01E0007803C0007003C0007003C000E003C001C0078001C00780038007800E0007801C00
-0F007000FFFFC0001F1F7D9E22>68 D<01FFFFFC001E0038001E0018001E0008001E0008003C00
-08003C0008003C0008003C00080078001000780800007808000078080000F0100000F0300000FF
-F00000F0300001E0200001E0200001E0200001E0200003C0000003C0000003C0000003C0000007
-8000000780000007800000078000000F800000FFF800001E1F7D9E1E>70
-D<00F1800389C00707800E03801C03803C0380380700780700780700780700F00E00F00E00F00E
-00F00E20F01C40F01C40703C40705C40308C800F070013147C9317>97 D<007E0001C100030080
-0E07801E07801C07003C0200780000780000780000F00000F00000F00000F00000F00000700100
-70020030040018380007C00011147C9315>99 D<00C001E001E001C00000000000000000000000
-0000000E003300230043804300470087000E000E000E001C001C001C0038403880308070803100
-33001C000B1F7C9E0E>105 D<1C0F80F0002630C318004740640C004780680E004700700E0047
-00700E008E00E01C000E00E01C000E00E01C000E00E01C001C01C038001C01C038001C01C03800
-1C01C0708038038071003803806100380380E10038038062007007006600300300380021147C93
-25>109 D<01C1E002621804741C04781C04701E04701E08E01E00E01E00E01E00E01E01C03C01
-C03C01C03C01C0380380780380700380E003C1C0072380071E000700000700000E00000E00000E
-00000E00001C00001C0000FFC000171D809317>112 D<018001C0038003800380038007000700
-FFF007000E000E000E000E001C001C001C001C003800380038003820704070407080708031001E
-000C1C7C9B0F>116 D E /Fm 81 125 df<001F83E000F06E3001C078780380F8780300F03007
-007000070070000700700007007000070070000700700007007000FFFFFF800700700007007000
-070070000700700007007000070070000700700007007000070070000700700007007000070070
-000700700007007000070070000700700007007000070070007FE3FF001D20809F1B>11
-D<003F0000E0C001C0C00381E00701E00701E0070000070000070000070000070000070000FFFF
-E00700E00700E00700E00700E00700E00700E00700E00700E00700E00700E00700E00700E00700
-E00700E00700E00700E00700E00700E07FC3FE1720809F19>I<003FE000E0E001C1E00381E007
-00E00700E00700E00700E00700E00700E00700E00700E0FFFFE00700E00700E00700E00700E007
-00E00700E00700E00700E00700E00700E00700E00700E00700E00700E00700E00700E00700E007
-00E07FE7FE1720809F19>I<001F81F80000F04F040001C07C06000380F80F000300F00F000700
-F00F00070070000007007000000700700000070070000007007000000700700000FFFFFFFF0007
-007007000700700700070070070007007007000700700700070070070007007007000700700700
-070070070007007007000700700700070070070007007007000700700700070070070007007007
-00070070070007007007007FE3FE3FF02420809F26>I<70F8F8F8F8F8F8F87070707070707070
-70702020202020000000000070F8F8F87005217CA00D>33 D<0078000000840000018400000302
-000007020000070200000702000007020000070400000704000007080000070800000310000003
-A00FFC03C003E0038001C001C0008001C0010003E0010004E0020008F002001870040030780800
-70380800701C1000F01E1000F00E2000F0074000F003C0087003C0087801C010380670301C1838
-6007E00F801E227EA023>38 D<70F8FCFC74040404080810102040060E7C9F0D>I<0020004000
-800100020006000C000C00180018003000300030007000600060006000E000E000E000E000E000
-E000E000E000E000E000E000E0006000600060007000300030003000180018000C000C00060002
-0001000080004000200B2E7DA112>I<800040002000100008000C000600060003000300018001
-80018001C000C000C000C000E000E000E000E000E000E000E000E000E000E000E000E000C000C0
-00C001C001800180018003000300060006000C00080010002000400080000B2E7DA112>I<0180
-0180018001800180C183F18F399C0FF003C003C00FF0399CF18FC1830180018001800180018010
-147DA117>I<70F8FCFC74040404080810102040060E7C840D>44 D<FFC0FFC00A027F8A0F>I<70
-F8F8F87005057C840D>I<03F0000E1C001C0E00180600380700700380700380700380700380F0
-03C0F003C0F003C0F003C0F003C0F003C0F003C0F003C0F003C0F003C0F003C0F003C0F003C070
-03807003807003807807803807001806001C0E000E1C0003F000121F7E9D17>48
-D<018003800F80F380038003800380038003800380038003800380038003800380038003800380
-03800380038003800380038003800380038007C0FFFE0F1E7C9D17>I<03F0000C1C00100E0020
-0700400780800780F007C0F803C0F803C0F803C02007C00007C0000780000780000F00000E0000
-1C0000380000700000600000C0000180000300000600400C00401800401000803FFF807FFF80FF
-FF80121E7E9D17>I<03F0000C1C00100E00200F00780F80780780780780380F80000F80000F00
-000F00000E00001C0000380003F000003C00000E00000F000007800007800007C02007C0F807C0
-F807C0F807C0F00780400780400F00200E001C3C0003F000121F7E9D17>I<000600000600000E
-00000E00001E00002E00002E00004E00008E00008E00010E00020E00020E00040E00080E00080E
-00100E00200E00200E00400E00C00E00FFFFF0000E00000E00000E00000E00000E00000E00000E
-0000FFE0141E7F9D17>I<1803001FFE001FFC001FF8001FE00010000010000010000010000010
-000010000011F000161C00180E001007001007800003800003800003C00003C00003C07003C0F0
-03C0F003C0E00380400380400700200600100E000C380003E000121F7E9D17>I<007C00018200
-0701000E03800C07801C0780380300380000780000700000700000F1F000F21C00F40600F80700
-F80380F80380F003C0F003C0F003C0F003C0F003C07003C07003C0700380380380380700180700
-0C0E00061C0001F000121F7E9D17>I<4000007FFFC07FFF807FFF804001008002008002008004
-0000080000080000100000200000200000400000400000C00000C00001C0000180000380000380
-00038000038000078000078000078000078000078000078000078000030000121F7D9D17>I<03
-F0000C0C001006003003002001806001806001806001807001807803003E03003F06001FC8000F
-F00003F80007FC000C7E00103F00300F806003804001C0C001C0C000C0C000C0C000C0C0008060
-01802001001002000C0C0003F000121F7E9D17>I<03F0000E18001C0C00380600380700700700
-700380F00380F00380F003C0F003C0F003C0F003C0F003C07007C07007C03807C0180BC00E13C0
-03E3C0000380000380000380000700300700780600780E00700C002018001070000FC000121F7E
-9D17>I<70F8F8F8700000000000000000000070F8F8F87005147C930D>I<70F8F8F87000000000
-00000000000070F0F8F878080808101010202040051D7C930D>I<0FC0307040384038E03CF03C
-F03C603C0038007000E000C0018001800100030002000200020002000200020000000000000000
-00000007000F800F800F8007000E207D9F15>63 D<001F800000E0700001000800060006000800
-010008000100100F00802030C0402060404040C0202041C01C2041C01C2081801C1083801C1083
-801C1083801C1083801C1083801C1083801C1081801C1041C01C1041C01C1040C03C2020605C20
-2030CC40100F0780080000000800000006000070010001C000E01F00001FF0001C207D9F23>I<
-000100000003800000038000000380000007C0000007C0000007C0000009E0000009E0000009E0
-000010F0000010F0000010F00000207800002078000020780000403C0000403C0000403C000080
-1E0000801E0000FFFE0001000F0001000F0001000F00020007800200078002000780040003C00E
-0003C01F0007E0FFC03FFE1F207F9F22>I<FFFFE0000F80380007801E0007801F0007800F0007
-800F8007800F8007800F8007800F8007800F8007800F0007801F0007801E0007803C0007FFF000
-07803C0007801E0007800F0007800F8007800780078007C0078007C0078007C0078007C0078007
-C00780078007800F8007800F0007801F000F803C00FFFFF0001A1F7E9E20>I<000FC040007030
-C001C009C0038005C0070003C00E0001C01E0000C01C0000C03C0000C07C0000407C0000407800
-0040F8000000F8000000F8000000F8000000F8000000F8000000F8000000F8000000F800000078
-0000007C0000407C0000403C0000401C0000401E0000800E000080070001000380020001C00400
-00703800000FC0001A217D9F21>I<FFFFE0000F803C0007801E000780070007800380078003C0
-078001E0078001E0078001F0078000F0078000F0078000F8078000F8078000F8078000F8078000
-F8078000F8078000F8078000F8078000F8078000F0078000F0078000F0078001E0078001E00780
-03C0078003800780070007800E000F803C00FFFFE0001D1F7E9E23>I<FFFFFF000F800F000780
-030007800300078001000780018007800080078000800780008007808080078080000780800007
-8080000781800007FF800007818000078080000780800007808000078080000780002007800020
-07800020078000400780004007800040078000C0078000C0078001800F800F80FFFFFF801B1F7E
-9E1F>I<FFFFFF000F800F00078003000780030007800100078001800780008007800080078000
-8007800080078080000780800007808000078080000781800007FF800007818000078080000780
-800007808000078080000780000007800000078000000780000007800000078000000780000007
-8000000FC00000FFFE0000191F7E9E1E>I<000FE0200078186000E004E0038002E0070001E00F
-0000E01E0000601E0000603C0000603C0000207C00002078000020F8000000F8000000F8000000
-F8000000F8000000F8000000F8000000F8007FFCF80003E0780001E07C0001E03C0001E03C0001
-E01E0001E01E0001E00F0001E0070001E0038002E000E0046000781820000FE0001E217D9F24>
-I<FFF8FFF80F800F8007800F0007800F0007800F0007800F0007800F0007800F0007800F000780
-0F0007800F0007800F0007800F0007800F0007FFFF0007800F0007800F0007800F0007800F0007
-800F0007800F0007800F0007800F0007800F0007800F0007800F0007800F0007800F0007800F00
-0F800F80FFF8FFF81D1F7E9E22>I<FFFC0FC00780078007800780078007800780078007800780
-078007800780078007800780078007800780078007800780078007800780078007800FC0FFFC0E
-1F7F9E10>I<0FFFC0007C00003C00003C00003C00003C00003C00003C00003C00003C00003C00
-003C00003C00003C00003C00003C00003C00003C00003C00003C00003C00003C00003C00203C00
-F83C00F83C00F83C00F0380040780040700030E0000F800012207E9E17>I<FFFC0FFC0FC003E0
-078001800780010007800200078004000780080007801000078020000780400007808000078100
-000783000007878000078F80000793C0000791E00007A1E00007C0F0000780F000078078000780
-3C0007803C0007801E0007801E0007800F000780078007800780078007C00FC007E0FFFC3FFC1E
-1F7E9E23>I<FFFE000FC000078000078000078000078000078000078000078000078000078000
-078000078000078000078000078000078000078000078000078000078002078002078002078002
-07800607800407800407800C07801C0F807CFFFFFC171F7E9E1C>I<FF80001FF80F80001F8007
-80001F0005C0002F0005C0002F0005C0002F0004E0004F0004E0004F000470008F000470008F00
-0470008F000438010F000438010F000438010F00041C020F00041C020F00041C020F00040E040F
-00040E040F00040E040F000407080F000407080F000407080F000403900F000403900F000401E0
-0F000401E00F000401E00F000E00C00F001F00C01F80FFE0C1FFF8251F7E9E2A>I<FF803FF807
-C007C007C0038005E0010005E0010004F001000478010004780100043C0100043C0100041E0100
-040F0100040F010004078100040781000403C1000401E1000401E1000400F1000400F100040079
-0004003D0004003D0004001F0004001F0004000F0004000700040007000E0003001F000300FFE0
-01001D1F7E9E22>I<001F800000F0F00001C0380007801E000F000F000E0007001E0007803C00
-03C03C0003C07C0003E0780001E0780001E0F80001F0F80001F0F80001F0F80001F0F80001F0F8
-0001F0F80001F0F80001F0F80001F0780001E07C0003E07C0003E03C0003C03C0003C01E000780
-0E0007000F000F0007801E0001C0380000F0F000001F80001C217D9F23>I<FFFFE0000F807800
-07801C0007801E0007800F0007800F8007800F8007800F8007800F8007800F8007800F8007800F
-0007801E0007801C000780780007FFE00007800000078000000780000007800000078000000780
-0000078000000780000007800000078000000780000007800000078000000FC00000FFFC000019
-1F7E9E1F>I<FFFF80000F80F0000780780007803C0007801E0007801E0007801F0007801F0007
-801F0007801F0007801E0007801E0007803C00078078000780F00007FF80000781C0000780E000
-0780F0000780700007807800078078000780780007807C0007807C0007807C0007807C0407807E
-0407803E040FC01E08FFFC0F10000003E01E207E9E21>82 D<07E0800C19801007803003806001
-80600180E00180E00080E00080E00080F00000F000007800007F00003FF0001FFC000FFE0003FF
-00001F800007800003C00003C00001C08001C08001C08001C08001C0C00180C00380E00300F006
-00CE0C0081F80012217D9F19>I<7FFFFFE0780F01E0600F0060400F0020400F0020C00F003080
-0F0010800F0010800F0010800F0010000F0000000F0000000F0000000F0000000F0000000F0000
-000F0000000F0000000F0000000F0000000F0000000F0000000F0000000F0000000F0000000F00
-00000F0000000F0000000F0000001F800007FFFE001C1F7E9E21>I<FFFC3FF80FC007C0078003
-800780010007800100078001000780010007800100078001000780010007800100078001000780
-010007800100078001000780010007800100078001000780010007800100078001000780010007
-80010007800100038002000380020001C0020001C0040000E008000070180000382000000FC000
-1D207E9E22>I<FFF003FE1F8000F80F0000600F800060078000400780004003C0008003C00080
-03C0008001E0010001E0010001F0010000F0020000F0020000F806000078040000780400003C08
-00003C0800003C0800001E1000001E1000001F3000000F2000000F20000007C0000007C0000007
-C000000380000003800000038000000100001F207F9E22>I<FFF07FF81FF01F800FC007C00F00
-078003800F00078001000F0007C00100078007C00200078007C00200078007C0020003C009E004
-0003C009E0040003C009E0040003E010F00C0001E010F0080001E010F0080001F02078080000F0
-2078100000F02078100000F0403C10000078403C20000078403C20000078C03E2000003C801E40
-00003C801E4000003C801E4000001F000F8000001F000F8000001F000F8000001E00078000000E
-00070000000E00070000000C000300000004000200002C207F9E2F>I<7FF83FF80FE00FC007C0
-070003C0020001E0040001F00C0000F0080000781000007C1000003C2000003E4000001E400000
-0F8000000F8000000780000003C0000007E0000005E0000009F0000018F8000010780000207C00
-00603C0000401E0000801F0001800F0001000780020007C0070003C01F8007E0FFE01FFE1F1F7F
-9E22>I<FFF003FF1F8000F80F8000600780004007C0004003E0008001E0008001F0010000F003
-0000F80200007C0400003C0400003E0800001E0800001F1000000FB0000007A0000007C0000003
-C0000003C0000003C0000003C0000003C0000003C0000003C0000003C0000003C0000003C00000
-03C0000007C000007FFE00201F7F9E22>I<7FFFF87C00F87000F06001E04001E0C003C0C003C0
-800780800F80800F00001E00001E00003C00003C0000780000F80000F00001E00001E00003C004
-03C0040780040F80040F000C1E000C1E00083C00183C0018780038F801F8FFFFF8161F7D9E1C>
-I<FEFEC0C0C0C0C0C0C0C0C0C0C0C0C0C0C0C0C0C0C0C0C0C0C0C0C0C0C0C0C0C0C0C0C0C0C0C0
-C0C0C0C0C0FEFE072D7CA10D>I<FEFE0606060606060606060606060606060606060606060606
-060606060606060606060606060606060606FEFE072D7FA10D>93 D<1FE000303000781800781C
-00300E00000E00000E00000E0000FE00078E001E0E00380E00780E00F00E10F00E10F00E10F01E
-10781E103867200F83C014147E9317>97 D<0E0000FE00000E00000E00000E00000E00000E0000
-0E00000E00000E00000E00000E00000E3E000EC3800F01C00F00E00E00E00E00700E00700E0078
-0E00780E00780E00780E00780E00780E00700E00700E00E00F00E00D01C00CC300083E0015207F
-9F19>I<03F80E0C1C1E381E380C70007000F000F000F000F000F000F00070007000380138011C
-020E0C03F010147E9314>I<000380003F80000380000380000380000380000380000380000380
-00038000038000038003E380061B801C0780380380380380700380700380F00380F00380F00380
-F00380F00380F003807003807003803803803807801C07800E1B8003E3F815207E9F19>I<03F0
-000E1C001C0E00380700380700700700700380F00380F00380FFFF80F00000F00000F000007000
-007000003800801800800C010007060001F80011147F9314>I<007C00C6018F038F0706070007
-0007000700070007000700FFF00700070007000700070007000700070007000700070007000700
-070007000700070007007FF01020809F0E>I<0000E003E3300E3C301C1C30380E00780F00780F
-00780F00780F00780F00380E001C1C001E380033E0002000002000003000003000003FFE001FFF
-800FFFC03001E0600070C00030C00030C00030C000306000603000C01C038003FC00141F7F9417
->I<0E0000FE00000E00000E00000E00000E00000E00000E00000E00000E00000E00000E00000E
-3E000E43000E81800F01C00F01C00E01C00E01C00E01C00E01C00E01C00E01C00E01C00E01C00E
-01C00E01C00E01C00E01C00E01C00E01C0FFE7FC16207F9F19>I<1C001E003E001E001C000000
-000000000000000000000E007E000E000E000E000E000E000E000E000E000E000E000E000E000E
-000E000E000E000E00FFC00A1F809E0C>I<00E001F001F001F000E00000000000000000000000
-00007007F000F00070007000700070007000700070007000700070007000700070007000700070
-007000700070007000706070F060F0C061803F000C28829E0E>I<0E0000FE00000E00000E0000
-0E00000E00000E00000E00000E00000E00000E00000E00000E0FF00E03C00E03000E02000E0400
-0E08000E10000E30000E70000EF8000F38000E1C000E1E000E0E000E07000E07800E03800E03C0
-0E03E0FFCFF815207F9F18>I<0E00FE000E000E000E000E000E000E000E000E000E000E000E00
-0E000E000E000E000E000E000E000E000E000E000E000E000E000E000E000E000E000E00FFE00B
-20809F0C>I<0E1F01F000FE618618000E81C81C000F00F00E000F00F00E000E00E00E000E00E0
-0E000E00E00E000E00E00E000E00E00E000E00E00E000E00E00E000E00E00E000E00E00E000E00
-E00E000E00E00E000E00E00E000E00E00E000E00E00E00FFE7FE7FE023147F9326>I<0E3E00FE
-43000E81800F01C00F01C00E01C00E01C00E01C00E01C00E01C00E01C00E01C00E01C00E01C00E
-01C00E01C00E01C00E01C00E01C0FFE7FC16147F9319>I<01F800070E001C03803801C03801C0
-7000E07000E0F000F0F000F0F000F0F000F0F000F0F000F07000E07000E03801C03801C01C0380
-070E0001F80014147F9317>I<0E3E00FEC3800F01C00F00E00E00E00E00F00E00700E00780E00
-780E00780E00780E00780E00780E00700E00F00E00E00F01E00F01C00EC3000E3E000E00000E00
-000E00000E00000E00000E00000E00000E0000FFE000151D7F9319>I<03E0800619801C05803C
-0780380380780380700380F00380F00380F00380F00380F00380F0038070038078038038038038
-07801C0B800E138003E380000380000380000380000380000380000380000380000380003FF815
-1D7E9318>I<0E78FE8C0F1E0F1E0F0C0E000E000E000E000E000E000E000E000E000E000E000E
-000E000E00FFE00F147F9312>I<1F9030704030C010C010C010E00078007F803FE00FF0007080
-3880188018C018C018E030D0608F800D147E9312>I<020002000200060006000E000E003E00FF
-F80E000E000E000E000E000E000E000E000E000E000E000E080E080E080E080E080610031001E0
-0D1C7F9B12>I<0E01C0FE1FC00E01C00E01C00E01C00E01C00E01C00E01C00E01C00E01C00E01
-C00E01C00E01C00E01C00E01C00E01C00E03C00603C0030DC001F1FC16147F9319>I<FF83F81E
-01E01C00C00E00800E00800E008007010007010003820003820003820001C40001C40001EC0000
-E80000E80000700000700000700000200015147F9318>I<FF9FE1FC3C0780701C0300601C0380
-200E0380400E0380400E03C0400707C0800704C0800704E080038861000388710003C8730001D0
-320001D03A0000F03C0000E01C0000E01C0000601800004008001E147F9321>I<7FC3FC0F01E0
-0701C007018003810001C20000E40000EC00007800003800003C00007C00004E00008700010700
-0303800201C00601E01E01E0FF07FE1714809318>I<FF83F81E01E01C00C00E00800E00800E00
-8007010007010003820003820003820001C40001C40001EC0000E80000E8000070000070000070
-00002000002000004000004000004000F08000F08000F100006200003C0000151D7F9318>I<3F
-FF380E200E201C40384078407000E001E001C00380078007010E011E011C0338027006700EFFFE
-10147F9314>I<FFFFFFFFFFF02C01808C2D>124 D E /Fn 53 122 df<0001FF01FE00001FFFCF
-FF00007F01FF0F8000FC03FE1FC001F807FC1FC003F807FC1FC007F007F81FC007F007F80F8007
-F003F8000007F003F8000007F003F8000007F003F8000007F003F8000007F003F8000007F003F8
-0000FFFFFFFFF000FFFFFFFFF000FFFFFFFFF00007F003F8000007F003F8000007F003F8000007
-F003F8000007F003F8000007F003F8000007F003F8000007F003F8000007F003F8000007F003F8
-000007F003F8000007F003F8000007F003F8000007F003F8000007F003F8000007F003F8000007
-F003F8000007F003F8000007F003F8000007F003F8000007F003F800007FFF3FFFC0007FFF3FFF
-C0007FFF3FFFC0002A2A7FA927>11 D<0001FF0000001FFFC000007F81E00000FC01E00001F807
-F00003F807F00007F007F00007F007F00007F007F00007F007F00007F001C00007F000000007F0
-00000007F000000007F03FF800FFFFFFF800FFFFFFF800FFFFFFF80007F003F80007F003F80007
-F003F80007F003F80007F003F80007F003F80007F003F80007F003F80007F003F80007F003F800
-07F003F80007F003F80007F003F80007F003F80007F003F80007F003F80007F003F80007F003F8
-0007F003F80007F003F80007F003F8007FFF3FFF807FFF3FFF807FFF3FFF80212A7FA925>I<3C
-007F00FF80FF80FFC0FFC0FFC07FC03EC000C000C00180018001800300030006000E001C003800
-30000A157BA913>39 D<1C007F007F00FF80FF80FF807F007F001C0009097B8813>46
-D<003F800001FFF00007E0FC000FC07E001F803F001F001F003F001F803E000F807E000FC07E00
-0FC07E000FC07E000FC0FE000FE0FE000FE0FE000FE0FE000FE0FE000FE0FE000FE0FE000FE0FE
-000FE0FE000FE0FE000FE0FE000FE0FE000FE0FE000FE0FE000FE0FE000FE07E000FC07E000FC0
-7E000FC07E000FC03F001F803F001F801F001F001F803F000FC07E0007E0FC0001FFF000003F80
-001B277DA622>48 D<000E00001E00007E0007FE00FFFE00FFFE00F8FE0000FE0000FE0000FE00
-00FE0000FE0000FE0000FE0000FE0000FE0000FE0000FE0000FE0000FE0000FE0000FE0000FE00
-00FE0000FE0000FE0000FE0000FE0000FE0000FE0000FE0000FE0000FE0000FE0000FE0000FE00
-7FFFFE7FFFFE7FFFFE17277BA622>I<00FF800007FFF0000FFFFC001E03FE003800FF807C003F
-80FE003FC0FF001FC0FF001FE0FF000FE0FF000FE07E000FE03C001FE000001FE000001FC00000
-1FC000003F8000003F0000007E000000FC000000F8000001F0000003E00000078000000F000000
-1E0000003C00E0007000E000E000E001C001C0038001C0060001C00FFFFFC01FFFFFC03FFFFFC0
-7FFFFFC0FFFFFF80FFFFFF80FFFFFF801B277DA622>I<007F800003FFF00007FFFC000F80FE00
-1F007F003F807F003F803F803F803F803F803F801F803F801F003F8000007F0000007F0000007E
-000000FC000001F8000007F00000FFC00000FFC0000001F80000007E0000003F0000003F800000
-1FC000001FC000001FE000001FE03C001FE07E001FE0FF001FE0FF001FE0FF001FC0FF003FC0FE
-003F807C007F003F00FE001FFFFC0007FFF00000FF80001B277DA622>I<00000E0000001E0000
-003E0000007E000000FE000000FE000001FE000003FE0000077E00000E7E00000E7E00001C7E00
-00387E0000707E0000E07E0000E07E0001C07E0003807E0007007E000E007E000E007E001C007E
-0038007E0070007E00E0007E00FFFFFFF8FFFFFFF8FFFFFFF80000FE000000FE000000FE000000
-FE000000FE000000FE000000FE000000FE00007FFFF8007FFFF8007FFFF81D277EA622>I<1800
-03001F801F001FFFFE001FFFFC001FFFF8001FFFF0001FFFC0001FFF00001C0000001C0000001C
-0000001C0000001C0000001C0000001C0000001C7FC0001DFFF8001F80FC001E003F0008003F00
-00001F8000001FC000001FC000001FE000001FE018001FE07C001FE0FE001FE0FE001FE0FE001F
-E0FE001FC0FC001FC078003F8078003F803C007F001F01FE000FFFFC0003FFF00000FF80001B27
-7DA622>I<0007F800003FFE0000FFFF0001FC078003F00FC007C01FC00F801FC01F801FC01F00
-1FC03F000F803F0000007E0000007E0000007E000000FE020000FE1FF000FE3FFC00FE603E00FE
-801F00FF801F80FF000FC0FF000FC0FE000FE0FE000FE0FE000FE0FE000FE07E000FE07E000FE0
-7E000FE07E000FE03E000FE03F000FC01F000FC01F001F800F801F0007E07E0003FFFC0001FFF8
-00003FC0001B277DA622>I<380000003E0000003FFFFFF03FFFFFF03FFFFFF07FFFFFE07FFFFF
-C07FFFFF807FFFFF0070000E0070000E0070001C00E0003800E0007000E000E0000001E0000001
-C000000380000007800000070000000F0000001F0000001E0000003E0000003E0000007E000000
-7C0000007C000000FC000000FC000000FC000000FC000001FC000001FC000001FC000001FC0000
-01FC000001FC000001FC000000F80000007000001C297CA822>I<003FC00001FFF00003FFFC00
-07C07E000F003F001E001F001E000F803E000F803E000F803F000F803F800F803FC00F803FF01F
-001FFC1E001FFE3C000FFFF8000FFFE00007FFF80001FFFC0001FFFE0007FFFF000F0FFF801E03
-FFC03E01FFC07C007FE07C001FE0F8000FE0F80007E0F80003E0F80003E0F80003E0F80003C07C
-0003C07E0007803F000F001FC03F000FFFFC0003FFF800007FC0001B277DA622>I<007F800001
-FFF00007FFF8000FC0FC001F803E003F001F007E001F807E001F807E000F80FE000FC0FE000FC0
-FE000FC0FE000FE0FE000FE0FE000FE0FE000FE0FE000FE07E001FE07E001FE03F003FE01F002F
-E00F80CFE007FF8FE001FF0FE000080FE000000FC000000FC000000FC000001F803E001F807F00
-1F807F003F007F003E007F007E007E00FC003E03F8001FFFE0000FFF800001FE00001B277DA622
->I<00000780000000000780000000000FC0000000000FC0000000000FC0000000001FE0000000
-001FE0000000003FF0000000003FF0000000003FF00000000077F80000000077F800000000F7FC
-00000000E3FC00000000E3FC00000001C1FE00000001C1FE00000003C1FF0000000380FF000000
-0380FF00000007007F80000007007F8000000F007FC000000E003FC000000E003FC000001C001F
-E000001C001FE000003FFFFFF000003FFFFFF000003FFFFFF00000700007F80000700007F80000
-F00007FC0000E00003FC0000E00003FC0001C00001FE0001C00001FE0003C00001FF00FFFE003F
-FFFCFFFE003FFFFCFFFE003FFFFC2E297EA833>65 D<FFFFFFF800FFFFFFFF00FFFFFFFFC003F8
-001FE003F8000FF003F80007F803F80003F803F80003FC03F80003FC03F80001FC03F80001FC03
-F80001FC03F80003FC03F80003F803F80003F803F80007F003F8000FF003F8001FC003F800FF80
-03FFFFFE0003FFFFFFC003F8000FF003F80003F803F80001FC03F80001FE03F80000FE03F80000
-FE03F80000FF03F80000FF03F80000FF03F80000FF03F80000FF03F80000FF03F80000FE03F800
-01FE03F80003FC03F80007FC03F8001FF8FFFFFFFFE0FFFFFFFFC0FFFFFFFE0028297DA830>I<
-00007FE0030007FFFC07001FFFFF0F007FF00F9F00FF0001FF01FC0000FF03F800007F07F00000
-3F0FE000001F1FC000001F1FC000000F3F8000000F3F800000077F800000077F800000077F0000
-0000FF00000000FF00000000FF00000000FF00000000FF00000000FF00000000FF00000000FF00
-000000FF000000007F000000007F800000007F800000073F800000073F800000071FC00000071F
-C000000E0FE000000E07F000001C03F800003C01FC00007800FF0001F0007FF007C0001FFFFF80
-0007FFFE0000007FF00028297CA831>I<FFFFFFFC0000FFFFFFFF8000FFFFFFFFE00003FC001F
-F80003FC0003FC0003FC0000FE0003FC00007F0003FC00003F8003FC00001FC003FC00001FC003
-FC00000FE003FC00000FE003FC000007F003FC000007F003FC000007F003FC000007F003FC0000
-07F803FC000007F803FC000007F803FC000007F803FC000007F803FC000007F803FC000007F803
-FC000007F803FC000007F803FC000007F803FC000007F003FC000007F003FC000007F003FC0000
-0FE003FC00000FE003FC00000FC003FC00001FC003FC00003F8003FC00007F0003FC0000FF0003
-FC0003FC0003FC001FF800FFFFFFFFF000FFFFFFFF8000FFFFFFFC00002D297EA834>I<FFFFFF
-FFC0FFFFFFFFC0FFFFFFFFC003FC003FC003FC000FE003FC0003E003FC0001E003FC0001E003FC
-0000E003FC0000E003FC0000E003FC0000F003FC01C07003FC01C07003FC01C07003FC01C00003
-FC03C00003FC03C00003FC0FC00003FFFFC00003FFFFC00003FFFFC00003FC0FC00003FC03C000
-03FC03C00003FC01C00003FC01C00003FC01C00003FC01C00003FC00000003FC00000003FC0000
-0003FC00000003FC00000003FC00000003FC00000003FC00000003FC000000FFFFFC0000FFFFFC
-0000FFFFFC000024297EA82A>70 D<00007FE003000007FFFC0700001FFFFF0F00007FF00F9F00
-00FF0001FF0001FC0000FF0003F800007F0007F000003F000FE000001F001FC000001F001FC000
-000F003F8000000F003F80000007007F80000007007F80000007007F0000000000FF0000000000
-FF0000000000FF0000000000FF0000000000FF0000000000FF0000000000FF0000000000FF0000
-000000FF0000FFFFF87F0000FFFFF87F8000FFFFF87F800000FF003F800000FF003F800000FF00
-1FC00000FF001FC00000FF000FE00000FF0007F00000FF0003F80000FF0001FC0000FF0000FF00
-01FF00007FF007FF00001FFFFF9F000007FFFE0F0000007FF003002D297CA835>I<FFFFF00FFF
-FFFFFFF00FFFFFFFFFF00FFFFF03FC00003FC003FC00003FC003FC00003FC003FC00003FC003FC
-00003FC003FC00003FC003FC00003FC003FC00003FC003FC00003FC003FC00003FC003FC00003F
-C003FC00003FC003FC00003FC003FC00003FC003FC00003FC003FFFFFFFFC003FFFFFFFFC003FF
-FFFFFFC003FC00003FC003FC00003FC003FC00003FC003FC00003FC003FC00003FC003FC00003F
-C003FC00003FC003FC00003FC003FC00003FC003FC00003FC003FC00003FC003FC00003FC003FC
-00003FC003FC00003FC003FC00003FC003FC00003FC003FC00003FC0FFFFF00FFFFFFFFFF00FFF
-FFFFFFF00FFFFF30297EA835>I<FFFFFCFFFFFCFFFFFC01FE0001FE0001FE0001FE0001FE0001
-FE0001FE0001FE0001FE0001FE0001FE0001FE0001FE0001FE0001FE0001FE0001FE0001FE0001
-FE0001FE0001FE0001FE0001FE0001FE0001FE0001FE0001FE0001FE0001FE0001FE0001FE0001
-FE0001FE0001FE0001FE00FFFFFCFFFFFCFFFFFC16297FA819>I<FFFE0000003FFF80FFFE0000
-003FFF80FFFF0000007FFF8003FF0000007FE00003FF0000007FE00003BF800000EFE00003BF80
-0000EFE000039FC00001CFE000039FC00001CFE000038FE000038FE000038FE000038FE000038F
-E000038FE0000387F000070FE0000387F000070FE0000383F8000E0FE0000383F8000E0FE00003
-81FC001C0FE0000381FC001C0FE0000381FC001C0FE0000380FE00380FE0000380FE00380FE000
-03807F00700FE00003807F00700FE00003803F80E00FE00003803F80E00FE00003803F80E00FE0
-0003801FC1C00FE00003801FC1C00FE00003800FE3800FE00003800FE3800FE000038007F7000F
-E000038007F7000FE000038007F7000FE000038003FE000FE000038003FE000FE000038001FC00
-0FE000038001FC000FE000038000F8000FE000FFFE00F803FFFF80FFFE00F803FFFF80FFFE0070
-03FFFF8039297DA840>77 D<0000FFC00000000FFFFC0000003F807F000000FE001FC00001F800
-07E00003F00003F00007E00001F8000FE00001FC001FC00000FE001FC00000FE003F8000007F00
-3F8000007F007F8000007F807F0000003F807F0000003F807F0000003F80FF0000003FC0FF0000
-003FC0FF0000003FC0FF0000003FC0FF0000003FC0FF0000003FC0FF0000003FC0FF0000003FC0
-FF0000003FC0FF0000003FC07F0000003F807F8000007F807F8000007F803F8000007F003F8000
-007F001FC00000FE001FC00000FE000FE00001FC0007F00003F80003F80007F00001FC000FE000
-00FE001FC000003FC0FF0000000FFFFC00000000FFC000002A297CA833>79
-D<FFFFFFE00000FFFFFFFE0000FFFFFFFF800003FC003FE00003FC000FF00003FC0007F80003FC
-0003FC0003FC0001FC0003FC0001FE0003FC0001FE0003FC0001FE0003FC0001FE0003FC0001FE
-0003FC0001FE0003FC0001FC0003FC0003F80003FC0007F80003FC000FE00003FC003FC00003FF
-FFFE000003FFFFFE000003FC00FF800003FC003FC00003FC001FE00003FC000FF00003FC0007F8
-0003FC0007F80003FC0007F80003FC0007F80003FC0007F80003FC0007F80003FC0007F80003FC
-0007F80003FC0007F80003FC0007F80E03FC0007F80E03FC0003F80E03FC0001FC1CFFFFF000FE
-1CFFFFF0007FF8FFFFF0000FE02F297EA832>82 D<00FF00C003FFE1C00FFFF9C01F80FFC03F00
-3FC03E000FC07C0007C07C0007C0FC0003C0FC0003C0FC0001C0FE0001C0FE0001C0FF000000FF
-C000007FFC00007FFFE0003FFFF8001FFFFE001FFFFF0007FFFF8003FFFFC000FFFFC0000FFFE0
-00007FE000001FF000000FF0000007F0E00003F0E00003F0E00003F0E00003F0F00003E0F00003
-E0F80007E0FC0007C0FF000F80FFE01F80E3FFFF00E1FFFC00C01FF0001C297CA825>I<7FFFFF
-FFFF807FFFFFFFFF807FFFFFFFFF807F807F807F807C007F800F8078007F80078078007F800780
-70007F800380F0007F8003C0F0007F8003C0E0007F8001C0E0007F8001C0E0007F8001C0E0007F
-8001C0E0007F8001C000007F80000000007F80000000007F80000000007F80000000007F800000
-00007F80000000007F80000000007F80000000007F80000000007F80000000007F80000000007F
-80000000007F80000000007F80000000007F80000000007F80000000007F80000000007F800000
-00007F80000000007F80000000007F80000000007F80000000FFFFFFC00000FFFFFFC00000FFFF
-FFC0002A287EA72F>I<FFFFF000FFFEFFFFF000FFFEFFFFF000FFFE03FC0000038003FC000003
-8003FC0000038003FC0000038003FC0000038003FC0000038003FC0000038003FC0000038003FC
-0000038003FC0000038003FC0000038003FC0000038003FC0000038003FC0000038003FC000003
-8003FC0000038003FC0000038003FC0000038003FC0000038003FC0000038003FC0000038003FC
-0000038003FC0000038003FC0000038003FC0000038003FC0000038003FC0000038003FC000003
-8001FC0000070001FE0000070000FE00000E00007F00000E00003F00003C00001FC0007800000F
-F003F0000007FFFFE0000000FFFF800000001FFC00002F297EA834>I<FFFFF0007FFFFFFFF000
-7FFFFFFFF0007FFF03FE000001C001FE0000038001FE0000038000FF0000070000FF0000070000
-FF80000F00007F80000E00007FC0000E00003FC0001C00003FE0001C00001FE0003800001FE000
-3800001FF0007800000FF0007000000FF800F0000007F800E0000007FC00E0000003FC01C00000
-03FC01C0000003FE03C0000001FE0380000001FF0780000000FF0700000000FF87000000007F8E
-000000007F8E000000007FDE000000003FDC000000003FFC000000001FF8000000001FF8000000
-000FF0000000000FF0000000000FF00000000007E00000000007E00000000003C00000000003C0
-000030297FA833>I<FFFFE0FFFFE01FFFC0FFFFE0FFFFE01FFFC0FFFFE0FFFFE01FFFC003FC00
-03FC0000700003FC0003FC0000700003FE0003FE0000F00001FE0001FE0000E00001FE0001FE00
-00E00001FF0001FF0001E00000FF0001FF0001C00000FF0001FF0001C000007F8003FF80038000
-007F8003FF80038000007FC007FFC0078000003FC0073FC0070000003FC0073FC0070000003FE0
-0F3FE00F0000001FE00E1FE00E0000001FE00E1FE00E0000000FF01C0FF01C0000000FF01C0FF0
-1C0000000FF01C0FF81C00000007F83807F83800000007F83807F83800000007FC7807FC780000
-0003FC7003FC7000000003FC7003FC7000000003FEF003FEF000000001FEE001FEE000000001FE
-E001FEE000000000FFC000FFC000000000FFC000FFC000000000FFC000FFC0000000007F80007F
-80000000007F80007F80000000007F80007F80000000003F00003F00000000003F00003F000000
-00003F00003F00000000001E00001E00000000001E00001E00000042297FA845>I<03FF80000F
-FFF0001F01FC003F80FE003F807F003F803F003F803F801F003F8000003F8000003F8000003F80
-00003F80003FFF8001FC3F800FE03F801F803F803F003F807E003F80FC003F80FC003F80FC003F
-80FC003F80FC005F807E00DF803F839FFC1FFE0FFC03F803FC1E1B7E9A21>97
-D<FFE00000FFE00000FFE000000FE000000FE000000FE000000FE000000FE000000FE000000FE0
-00000FE000000FE000000FE000000FE000000FE000000FE1FE000FE7FF800FFE07E00FF803F00F
-F001F80FE000FC0FE000FC0FE0007E0FE0007E0FE0007F0FE0007F0FE0007F0FE0007F0FE0007F
-0FE0007F0FE0007F0FE0007F0FE0007E0FE0007E0FE0007E0FE000FC0FE000FC0FF001F80FF803
-F00F9C0FE00F0FFF800E01FC00202A7EA925>I<003FF00001FFFC0003F03E000FC07F001F807F
-003F007F003F007F007F003E007E0000007E000000FE000000FE000000FE000000FE000000FE00
-0000FE000000FE0000007E0000007E0000007F0000003F0003803F8003801F8007000FE00E0003
-F83C0001FFF800003FC000191B7E9A1E>I<00007FF000007FF000007FF0000007F0000007F000
-0007F0000007F0000007F0000007F0000007F0000007F0000007F0000007F0000007F0000007F0
-003F87F001FFF7F007F03FF00FC00FF01F8007F03F0007F03F0007F07E0007F07E0007F07E0007
-F0FE0007F0FE0007F0FE0007F0FE0007F0FE0007F0FE0007F0FE0007F0FE0007F07E0007F07E00
-07F03F0007F03F0007F01F800FF00FC01FF007E07FFF01FFE7FF007F87FF202A7EA925>I<003F
-C00001FFF00003E07C000F803E001F801F001F001F003F000F807E000F807E000FC07E000FC0FE
-0007C0FE0007C0FFFFFFC0FFFFFFC0FE000000FE000000FE0000007E0000007E0000007F000000
-3F0001C01F0001C00F80038007C0070003F01E0000FFFC00003FE0001A1B7E9A1F>I<0007F800
-3FFC007E3E01FC7F03F87F03F07F07F07F07F03E07F00007F00007F00007F00007F00007F00007
-F000FFFFC0FFFFC0FFFFC007F00007F00007F00007F00007F00007F00007F00007F00007F00007
-F00007F00007F00007F00007F00007F00007F00007F00007F00007F00007F00007F0007FFF807F
-FF807FFF80182A7EA915>I<007F80F001FFE3F807C0FE1C0F807C7C1F003E7C1F003E103F003F
-003F003F003F003F003F003F003F003F003F003F001F003E001F003E000F807C0007C0F80005FF
-E0000C7F8000180000001C0000001C0000001E0000001FFFF8001FFFFF000FFFFFC007FFFFE003
-FFFFF00FFFFFF03E0007F07C0001F8F80000F8F80000F8F80000F8F80000F87C0001F07C0001F0
-3F0007E00FC01F8007FFFF00007FF0001E287E9A22>I<FFE00000FFE00000FFE000000FE00000
-0FE000000FE000000FE000000FE000000FE000000FE000000FE000000FE000000FE000000FE000
-000FE000000FE07E000FE1FF800FE30FC00FE40FE00FE807E00FF807F00FF007F00FF007F00FE0
-07F00FE007F00FE007F00FE007F00FE007F00FE007F00FE007F00FE007F00FE007F00FE007F00F
-E007F00FE007F00FE007F00FE007F00FE007F00FE007F0FFFE3FFFFFFE3FFFFFFE3FFF202A7DA9
-25>I<07000F801FC03FE03FE03FE01FC00F8007000000000000000000000000000000FFE0FFE0
-FFE00FE00FE00FE00FE00FE00FE00FE00FE00FE00FE00FE00FE00FE00FE00FE00FE00FE00FE00F
-E00FE00FE0FFFEFFFEFFFE0F2B7EAA12>I<FFE00000FFE00000FFE000000FE000000FE000000F
-E000000FE000000FE000000FE000000FE000000FE000000FE000000FE000000FE000000FE00000
-0FE03FF80FE03FF80FE03FF80FE007000FE00E000FE03C000FE078000FE0F0000FE1E0000FE3C0
-000FE780000FEFC0000FFFE0000FFFE0000FF7F0000FE3F8000FC1FC000FC1FC000FC0FE000FC0
-7F000FC07F000FC03F800FC01FC00FC01FC0FFFC7FFCFFFC7FFCFFFC7FFC1E2A7EA923>107
-D<FFE0FFE0FFE00FE00FE00FE00FE00FE00FE00FE00FE00FE00FE00FE00FE00FE00FE00FE00FE0
-0FE00FE00FE00FE00FE00FE00FE00FE00FE00FE00FE00FE00FE00FE00FE00FE00FE00FE00FE00F
-E0FFFEFFFEFFFE0F2A7EA912>I<FFC07F001FC000FFC1FFC07FF000FFC307E0C1F8000FC407F1
-01FC000FC803F200FC000FD803FE00FE000FD003FC00FE000FD003FC00FE000FE003F800FE000F
-E003F800FE000FE003F800FE000FE003F800FE000FE003F800FE000FE003F800FE000FE003F800
-FE000FE003F800FE000FE003F800FE000FE003F800FE000FE003F800FE000FE003F800FE000FE0
-03F800FE000FE003F800FE000FE003F800FE000FE003F800FE00FFFE3FFF8FFFE0FFFE3FFF8FFF
-E0FFFE3FFF8FFFE0331B7D9A38>I<FFC07E00FFC1FF80FFC30FC00FC40FE00FC807E00FD807F0
-0FD007F00FD007F00FE007F00FE007F00FE007F00FE007F00FE007F00FE007F00FE007F00FE007
-F00FE007F00FE007F00FE007F00FE007F00FE007F00FE007F00FE007F00FE007F0FFFE3FFFFFFE
-3FFFFFFE3FFF201B7D9A25>I<003FE00001FFFC0003F07E000FC01F801F800FC03F0007E03F00
-07E07E0003F07E0003F07E0003F0FE0003F8FE0003F8FE0003F8FE0003F8FE0003F8FE0003F8FE
-0003F8FE0003F87E0003F07E0003F03F0007E03F0007E01F800FC00FC01F8007F07F0001FFFC00
-003FE0001D1B7E9A22>I<FFE1FE00FFE7FF80FFFE0FE00FF803F00FF001F80FE001FC0FE000FC
-0FE000FE0FE000FE0FE0007F0FE0007F0FE0007F0FE0007F0FE0007F0FE0007F0FE0007F0FE000
-7F0FE0007E0FE000FE0FE000FE0FE000FC0FE001FC0FF001F80FF803F00FFC0FE00FEFFF800FE1
-FC000FE000000FE000000FE000000FE000000FE000000FE000000FE000000FE000000FE00000FF
-FE0000FFFE0000FFFE000020277E9A25>I<FFC3E0FFC7F8FFCC7C0FD8FE0FD0FE0FD0FE0FF0FE
-0FE07C0FE0000FE0000FE0000FE0000FE0000FE0000FE0000FE0000FE0000FE0000FE0000FE000
-0FE0000FE0000FE0000FE000FFFF00FFFF00FFFF00171B7E9A1B>114 D<03FE300FFFF03E03F0
-7800F07000F0F00070F00070F80070FE0000FFE0007FFF007FFFC03FFFE01FFFF007FFF800FFF8
-0007FC0000FCE0007CE0003CF0003CF00038F80038FC0070FF01E0E7FFC0C1FF00161B7E9A1B>
-I<00700000700000700000700000F00000F00000F00001F00003F00003F00007F0001FFFE0FFFF
-E0FFFFE007F00007F00007F00007F00007F00007F00007F00007F00007F00007F00007F00007F0
-0007F00007F07007F07007F07007F07007F07007F07007F07003F0E001F8C000FFC0003F001426
-7FA51A>I<FFE07FF0FFE07FF0FFE07FF00FE007F00FE007F00FE007F00FE007F00FE007F00FE0
-07F00FE007F00FE007F00FE007F00FE007F00FE007F00FE007F00FE007F00FE007F00FE007F00F
-E007F00FE007F00FE007F00FE00FF00FE00FF007E017F003F067FF01FFC7FF007F87FF201B7D9A
-25>I<FFFE07FFFFFE07FFFFFE07FF07F000E007F000E007F801E003F801C003F801C001FC0380
-01FC038001FE078000FE070000FF0F00007F0E00007F0E00003F9C00003F9C00003FFC00001FF8
-00001FF800000FF000000FF000000FF0000007E0000007E0000003C0000003C000201B7F9A23>
-I<FFFC7FFC1FFCFFFC7FFC1FFCFFFC7FFC1FFC0FE00FE001C007F007E0038007F007E0038007F8
-07F0078003F807F0070003F807F8070001FC0FF80E0001FC0FF80E0001FE1FFC1E0000FE1CFC1C
-0000FE1CFE1C0000FF387E3C00007F387E3800007F787F3800003FF03F7000003FF03F7000003F
-E01FF000001FE01FE000001FE01FE000000FC00FC000000FC00FC000000FC00FC0000007800780
-000007800780002E1B7F9A31>I<FFFC1FFEFFFC1FFEFFFC1FFE07F0078003F8070001FC0F0001
-FE1E0000FE3C00007F7800003FF800003FF000001FE000000FE0000007F0000007F800000FF800
-001FFC00003DFE000038FF0000787F0000F03F8001E03FC003C01FE003800FE0FFF03FFFFFF03F
-FFFFF03FFF201B7F9A23>I<FFFE07FFFFFE07FFFFFE07FF07F000E007F000E007F801E003F801
-C003F801C001FC038001FC038001FE078000FE070000FF0F00007F0E00007F0E00003F9C00003F
-9C00003FFC00001FF800001FF800000FF000000FF0000007F0000007E0000007E0000003C00000
-03C000000380000003800000078000380700007C070000FE0E0000FE0E0000FE1C0000FE380000
-7C7000003FE000000F80000020277F9A23>I E /Fo 5 103 df<0000300000F80001F80003F000
-0FE0001F80007F0000FE0003F80007F0000FC0003F80007E0000FC0000FC00007E00003F80000F
-C00007F00003F80000FE00007F00001F80000FE00003F00001F80000F8000030151C7D9E1C>60
-D<600000F80000FC00007E00003F80000FC00007F00003F80000FE00007F00001F80000FE00003
-F00001F80001F80003F0000FE0001F80007F0000FE0003F80007F0000FC0003F80007E0000FC00
-00F80000600000151C7D9E1C>62 D<FF0000FF0000FF00000F00000F00000F00000F00000F0000
-0F00000F00000F1F800F7FE00FFFF00FE0F80FC07C0F803C0F001E0F001E0F000F0F000F0F000F
-0F000F0F000F0F000F0F000F0F001E0F801E0F803C0FC07C0FE0F80FFFF00F7FC0071F0018217F
-A01C>98 D<000FF0000FF0000FF00000F00000F00000F00000F00000F00000F00000F000F8F003
-FEF00FFFF01F07F03E03F03C01F07800F07800F0F000F0F000F0F000F0F000F0F000F0F000F0F0
-00F07800F07801F03C01F03E03F01F07F00FFFFF07FEFF01F8FF18217EA01C>100
-D<0003F8000FFC001FFE003E1E003C0C0078000078000078000078000078007FFFF8FFFFF8FFFF
-F80078000078000078000078000078000078000078000078000078000078000078000078000078
-000078000078000078000078003FFFF03FFFF03FFFF017217FA01C>102
-D E /Fp 10 109 df<00000001E00000000000000003F00000000000000003F000000000000000
-07F80000000000000007F80000000000000007F8000000000000000FFC000000000000000FFC00
-0000000000001FFE000000000000001FFE000000000000001FFE000000000000003FFF00000000
-0000003FFF000000000000007FFF800000000000007BFF800000000000007BFF80000000000000
-F3FFC0000000000000F1FFC0000000000001F1FFE0000000000001E0FFE0000000000001E0FFE0
-000000000003C0FFF0000000000003C07FF0000000000007C07FF8000000000007803FF8000000
-000007803FF800000000000F003FFC00000000000F001FFC00000000001F001FFE00000000001E
-000FFE00000000001E000FFE00000000003C000FFF00000000003C0007FF00000000007C0007FF
-8000000000780003FF8000000000780003FF8000000000F00003FFC000000000F00001FFC00000
-0001FFFFFFFFE000000001FFFFFFFFE000000003FFFFFFFFF000000003FFFFFFFFF000000003C0
-00007FF000000007C000007FF8000000078000003FF80000000F8000003FFC0000000F0000003F
-FC0000000F0000001FFC0000001F0000001FFE0000001E0000000FFE0000003E0000000FFF0000
-003C00000007FF0000003C00000007FF0000007C00000007FF800000FC00000003FF8000FFFFF8
-0003FFFFFFC0FFFFF80003FFFFFFC0FFFFF80003FFFFFFC0FFFFF80003FFFFFFC0423B7DBA49>
-65 D<FFFFFFFFFF800000FFFFFFFFFFF80000FFFFFFFFFFFF0000FFFFFFFFFFFFC000007FF000
-07FFE000007FF000007FF800007FF000001FFC00007FF000000FFE00007FF0000003FF00007FF0
-000001FF80007FF0000000FFC0007FF00000007FE0007FF00000007FE0007FF00000003FF0007F
-F00000003FF8007FF00000001FF8007FF00000001FF8007FF00000001FFC007FF00000001FFC00
-7FF00000000FFE007FF00000000FFE007FF00000000FFE007FF00000000FFE007FF00000000FFE
-007FF00000000FFF007FF00000000FFF007FF00000000FFF007FF00000000FFF007FF00000000F
-FF007FF00000000FFF007FF00000000FFF007FF00000000FFF007FF00000000FFF007FF0000000
-0FFF007FF00000000FFF007FF00000000FFF007FF00000000FFE007FF00000000FFE007FF00000
-000FFE007FF00000000FFE007FF00000000FFC007FF00000001FFC007FF00000001FFC007FF000
-00001FF8007FF00000003FF8007FF00000003FF0007FF00000007FF0007FF00000007FE0007FF0
-000000FFC0007FF0000001FFC0007FF0000003FF80007FF0000007FF00007FF000001FFE00007F
-F000007FF800007FF00007FFF000FFFFFFFFFFFFC000FFFFFFFFFFFF0000FFFFFFFFFFF80000FF
-FFFFFFFF800000403B7CBA4A>68 D<FFFFFFFFFFFFC0FFFFFFFFFFFFC0FFFFFFFFFFFFC0FFFFFF
-FFFFFFC0007FF00007FFC0007FF000007FE0007FF000003FE0007FF000000FE0007FF0000007E0
-007FF0000007E0007FF0000003E0007FF0000003E0007FF0000001E0007FF0000001E0007FF000
-0001E0007FF0000001E0007FF0000001F0007FF000F000F0007FF000F000F0007FF000F000F000
-7FF000F000F0007FF000F00000007FF000F00000007FF001F00000007FF001F00000007FF003F0
-0000007FF00FF00000007FFFFFF00000007FFFFFF00000007FFFFFF00000007FFFFFF00000007F
-F00FF00000007FF003F00000007FF001F00000007FF001F00000007FF000F00000007FF000F000
-00007FF000F00000007FF000F00000007FF000F00000007FF000F00000007FF000000000007FF0
-00000000007FF000000000007FF000000000007FF000000000007FF000000000007FF000000000
-007FF000000000007FF000000000007FF000000000007FF000000000007FF000000000007FF000
-000000007FF000000000FFFFFFFE000000FFFFFFFE000000FFFFFFFE000000FFFFFFFE00000034
-3B7CBA3D>70 D<FFFFFFFFF800000000FFFFFFFFFFC0000000FFFFFFFFFFF8000000FFFFFFFFFF
-FE000000007FF0001FFF000000007FF00003FFC00000007FF00000FFE00000007FF000007FF000
-00007FF000003FF80000007FF000003FF80000007FF000003FFC0000007FF000001FFC0000007F
-F000001FFC0000007FF000001FFE0000007FF000001FFE0000007FF000001FFE0000007FF00000
-1FFE0000007FF000001FFE0000007FF000001FFE0000007FF000001FFC0000007FF000001FFC00
-00007FF000003FFC0000007FF000003FF80000007FF000007FF00000007FF000007FE00000007F
-F00001FFC00000007FF00003FF800000007FF0001FFE000000007FFFFFFFF8000000007FFFFFFF
-C0000000007FFFFFFFC0000000007FF0007FF0000000007FF0001FF8000000007FF0000FFC0000
-00007FF00007FE000000007FF00003FF000000007FF00003FF800000007FF00001FF800000007F
-F00001FF800000007FF00001FFC00000007FF00001FFC00000007FF00001FFC00000007FF00001
-FFC00000007FF00001FFC00000007FF00001FFE00000007FF00001FFE00000007FF00001FFE000
-00007FF00001FFE00000007FF00001FFE00000007FF00001FFE001E0007FF00001FFE001E0007F
-F00000FFF001E0007FF00000FFF001E0007FF00000FFF003C0007FF000007FF803C0FFFFFFF800
-3FFC0780FFFFFFF8001FFE0F80FFFFFFF80007FFFF00FFFFFFF80001FFFC000000000000001FF0
-00433C7CBA48>82 D<3FFFFFFFFFFFFFC03FFFFFFFFFFFFFC03FFFFFFFFFFFFFC03FFFFFFFFFFF
-FFC03FF8007FF001FFC07FC0007FF0003FE07F80007FF0001FE07F00007FF0000FE07E00007FF0
-0007E07C00007FF00003E07C00007FF00003E07C00007FF00003E07800007FF00001E07800007F
-F00001E07800007FF00001E07800007FF00001E0F000007FF00000F0F000007FF00000F0F00000
-7FF00000F0F000007FF00000F0F000007FF00000F00000007FF00000000000007FF00000000000
-007FF00000000000007FF00000000000007FF00000000000007FF00000000000007FF000000000
-00007FF00000000000007FF00000000000007FF00000000000007FF00000000000007FF0000000
-0000007FF00000000000007FF00000000000007FF00000000000007FF00000000000007FF00000
-000000007FF00000000000007FF00000000000007FF00000000000007FF00000000000007FF000
-00000000007FF00000000000007FF00000000000007FF00000000000007FF00000000000007FF0
-0000000000007FF00000000000007FF00000000000007FF00000000000007FF00000000000007F
-F00000000000007FF0000000000FFFFFFFFF8000000FFFFFFFFF8000000FFFFFFFFF8000000FFF
-FFFFFF80003C3A7DB943>84 D<00FE00000000FFFE00000000FFFE00000000FFFE00000000FFFE
-0000000007FE0000000003FE0000000003FE0000000003FE0000000003FE0000000003FE000000
-0003FE0000000003FE0000000003FE0000000003FE0000000003FE0000000003FE0000000003FE
-0000000003FE0000000003FE0000000003FE0000000003FE0000000003FE01FF000003FE1FFFF0
-0003FE7FFFFC0003FEFC03FE0003FFF000FF0003FFC0003F8003FF00001FC003FE00001FE003FE
-00000FF003FE00000FF803FE00000FF803FE000007FC03FE000007FC03FE000007FC03FE000007
-FE03FE000007FE03FE000007FE03FE000007FE03FE000007FE03FE000007FE03FE000007FE03FE
-000007FE03FE000007FE03FE000007FC03FE000007FC03FE000007FC03FE00000FFC03FE00000F
-F803FE00000FF003FE00001FF003FF00001FE003FF80003FC003FFC0007F8003F9E000FF0003F0
-FC07FE0003F07FFFF80003E01FFFE00003C003FE00002F3C7DBB36>98 D<000000003F80000000
-3FFF800000003FFF800000003FFF800000003FFF8000000001FF8000000000FF8000000000FF80
-00000000FF8000000000FF8000000000FF8000000000FF8000000000FF8000000000FF80000000
-00FF8000000000FF8000000000FF8000000000FF8000000000FF8000000000FF8000000000FF80
-00000000FF800000FF80FF80000FFFF0FF80003FFFFCFF8000FFC03FFF8001FE000FFF8003FC00
-03FF8007F80001FF800FF00000FF801FF00000FF803FE00000FF803FE00000FF807FE00000FF80
-7FC00000FF807FC00000FF807FC00000FF80FFC00000FF80FFC00000FF80FFC00000FF80FFC000
-00FF80FFC00000FF80FFC00000FF80FFC00000FF80FFC00000FF80FFC00000FF807FC00000FF80
-7FC00000FF807FC00000FF803FE00000FF803FE00000FF801FE00000FF800FF00001FF8007F000
-03FF8003F80007FF8001FE001FFFC000FF807EFFFE007FFFF8FFFE000FFFE0FFFE0001FF00FFFE
-2F3C7DBB36>100 D<00001FF0000000FFF8000003FFFE00000FF87F00001FE0FF00003FC1FF80
-007F81FF8000FF81FF8000FF81FF8001FF00FF0001FF007E0001FF003C0001FF00000001FF0000
-0001FF00000001FF00000001FF00000001FF00000001FF00000001FF00000001FF00000001FF00
-0000FFFFFF8000FFFFFF8000FFFFFF8000FFFFFF800001FF00000001FF00000001FF00000001FF
-00000001FF00000001FF00000001FF00000001FF00000001FF00000001FF00000001FF00000001
-FF00000001FF00000001FF00000001FF00000001FF00000001FF00000001FF00000001FF000000
-01FF00000001FF00000001FF00000001FF00000001FF00000001FF00000001FF00000001FF0000
-0001FF00000001FF00000001FF0000007FFFFE00007FFFFE00007FFFFE00007FFFFE0000213C7D
-BB1E>102 D<01E00007F80007FC000FFE000FFE001FFE001FFE000FFE000FFE0007FC0007F800
-01E00000000000000000000000000000000000000000000000000000000000000000000000FE00
-FFFE00FFFE00FFFE00FFFE0007FE0003FE0003FE0003FE0003FE0003FE0003FE0003FE0003FE00
-03FE0003FE0003FE0003FE0003FE0003FE0003FE0003FE0003FE0003FE0003FE0003FE0003FE00
-03FE0003FE0003FE0003FE0003FE0003FE0003FE00FFFFF0FFFFF0FFFFF0FFFFF0143D7DBC1A>
-105 D<00FE00FFFE00FFFE00FFFE00FFFE0007FE0003FE0003FE0003FE0003FE0003FE0003FE00
-03FE0003FE0003FE0003FE0003FE0003FE0003FE0003FE0003FE0003FE0003FE0003FE0003FE00
-03FE0003FE0003FE0003FE0003FE0003FE0003FE0003FE0003FE0003FE0003FE0003FE0003FE00
-03FE0003FE0003FE0003FE0003FE0003FE0003FE0003FE0003FE0003FE0003FE0003FE0003FE00
-03FE0003FE0003FE0003FE0003FE00FFFFF8FFFFF8FFFFF8FFFFF8153C7DBB1A>108
-D E /Fq 4 106 df<0001FE00000007FF8000001E01E000007800780000E0001C000180000600
-030000030006000001800C000000C00C000000C018000000603000000030300000003030000000
-30600000001860000000186000000018C00000000CC00000000CC00000000CC00000000CC00000
-000CC00000000CC00000000CC00000000CC00000000C6000000018600000001860000000183000
-0000303000000030300000003018000000600C000000C00C000000C00600000180030000030001
-8000060000E0001C000078007800001E01E0000007FF80000001FE0000262B7DA02D>13
-D<03C00FF01FF83FFC7FFE7FFEFFFFFFFFFFFFFFFFFFFFFFFF7FFE7FFE3FFC1FF80FF003C01012
-7D9317>15 D<004000C00180018001800300030003000600060006000C000C0018001800180030
-0030003000600060006000C000C0006000600060003000300030001800180018000C000C000600
-0600060003000300030001800180018000C000400A2E7CA112>104 D<C000C000600060006000
-3000300030001800180018000C000C0006000600060003000300030001800180018000C000C001
-80018001800300030003000600060006000C000C00180018001800300030003000600060006000
-C000C0000A2E7DA112>I E /Fr 60 125 df<0003FC0FE0001FFF3FF8007E03FC7801F807F0FC
-03F00FF0FC03F00FE0FC07E00FE07807E007E00007E007E00007E007E00007E007E00007E007E0
-0007E007E00007E007E000FFFFFFFF80FFFFFFFF8007E007E00007E007E00007E007E00007E007
-E00007E007E00007E007E00007E007E00007E007E00007E007E00007E007E00007E007E00007E0
-07E00007E007E00007E007E00007E007E00007E007E00007E007E00007E007E00007E007E00007
-E007E0007FFE7FFF007FFE7FFF0026267FA524>11 D<0003FC00003FFE00007E070001F80F8003
-F01F8003E01F8007E01F8007E01F8007E01F8007E0060007E0000007E0000007E0000007E0FFC0
-FFFFFFC0FFFFFFC007E00FC007E00FC007E00FC007E00FC007E00FC007E00FC007E00FC007E00F
-C007E00FC007E00FC007E00FC007E00FC007E00FC007E00FC007E00FC007E00FC007E00FC007E0
-0FC007E00FC007E00FC07FFC7FFC7FFC7FFC1E267FA522>I<0003FFC0003FFFC000FE0FC001F8
-1FC003F01FC003E01FC007E00FC007E00FC007E00FC007E00FC007E00FC007E00FC007E00FC007
-E00FC0FFFFFFC0FFFFFFC007E00FC007E00FC007E00FC007E00FC007E00FC007E00FC007E00FC0
-07E00FC007E00FC007E00FC007E00FC007E00FC007E00FC007E00FC007E00FC007E00FC007E00F
-C007E00FC007E00FC007E00FC07FFEFFFC7FFEFFFC1E267FA522>I<3C7EFFFFFFFF7E3C08087C
-8711>46 D<007F800003FFF00007E1F8000F807C001F003E003F003F003E001F007E001F807E00
-1F807E001F807E001F80FE001FC0FE001FC0FE001FC0FE001FC0FE001FC0FE001FC0FE001FC0FE
-001FC0FE001FC0FE001FC0FE001FC0FE001FC0FE001FC07E001F807E001F807E001F807E001F80
-3F003F003F003F001F003E000F807C0007E1F80003FFF000007F80001A237EA21F>48
-D<001C00003C0000FC00FFFC00FFFC0000FC0000FC0000FC0000FC0000FC0000FC0000FC0000FC
-0000FC0000FC0000FC0000FC0000FC0000FC0000FC0000FC0000FC0000FC0000FC0000FC0000FC
-0000FC0000FC0000FC0000FC0000FC0000FC0000FC007FFFFC7FFFFC16237CA21F>I<01FF0007
-FFC01E07F03803F86001FC7C00FEFE00FEFE00FFFE007FFE007F7C007F3800FF0000FF0000FE00
-00FE0001FC0001F80003F00007E0000780000F00001E00003C0000700000E00301C00303800707
-00060600060FFFFE1FFFFE3FFFFE7FFFFCFFFFFCFFFFFC18237DA21F>I<01FF0007FFE01E03F0
-3801F83C01FC7E00FE7E00FE7E00FE3E00FE1C01FE0001FC0001FC0003F80007F0000FC001FF00
-01FF000007E00001F00001F80000FC0000FE0000FF0000FF1000FF7C00FFFE00FFFE00FFFE00FE
-FE00FE7C01FC7001F83E07F00FFFC001FF0018237DA21F>I<0000380000007800000078000000
-F8000001F8000003F8000007F8000006F800000CF800001CF8000038F8000030F8000060F80000
-E0F80001C0F8000180F8000300F8000700F8000E00F8001C00F8001800F8003000F8007000F800
-E000F800FFFFFFC0FFFFFFC00001F8000001F8000001F8000001F8000001F8000001F8000001F8
-00007FFFC0007FFFC01A237EA21F>I<18000C1F007C1FFFF81FFFF01FFFE01FFFC01FFF801FFE
-0018000018000018000018000018000018FF001BFFE01F01F01C00F80800FC00007E00007E0000
-7E00007F00007F78007FFC007FFC007FFC007FFC007EF8007E6000FC7000FC3801F81E07E007FF
-C001FE0018237DA21F>I<001FC0007FF001F83803E00C07803E0F807E1F007E3F007E3F007E7E
-003C7E00007E00007E0000FE3FC0FE7FF0FE80F8FF80FCFF007CFF007EFE007EFE007FFE007FFE
-007FFE007F7E007F7E007F7E007F7E007F3E007E3F007E1F007C0F80F807C1F003FFC0007F0018
-237DA21F>I<300000003C0000003FFFFFC03FFFFFC03FFFFF807FFFFF007FFFFE007FFFFC0060
-00180060001800E0003000C0006000C000C0000001800000018000000300000007000000060000
-000E0000001E0000001E0000001E0000003C0000003C0000007C0000007C0000007C0000007C00
-0000FC000000FC000000FC000000FC000000FC000000FC000000FC000000780000003000001A25
-7DA41F>I<00FF8003FFE00F01F81C007C38003C38001E78001E78001E7C001E7E001E7F803C7F
-E03C3FF8781FFCF01FFFC00FFFC003FFE003FFF80FFFFC1E1FFC3C07FE7801FE7800FFF0003FF0
-001FF0000FF0000FF0000FF0000E78000E78001C3E00381F80F007FFE000FF0018237DA21F>I<
-00FF0003FFC00F83E01F00F03F00F87E007C7E007C7E007EFE007EFE007EFE007EFE007FFE007F
-FE007FFE007F7E007F7E00FF3E00FF3F01FF1F017F0FFE7F03FC7F00007F00007E00007E3C007E
-7E00FC7E00FC7E00F87E00F07C01F03003E01C0F800FFF0003F80018237DA21F>I<00001C0000
-0000001C00000000003E00000000003E00000000003E00000000007F00000000007F0000000000
-FF8000000000FF8000000000FF80000000019FC0000000019FC0000000031FE0000000030FE000
-0000030FE00000000607F00000000607F00000000C07F80000000C03F80000001C03FC00000018
-01FC0000001801FC0000003001FE0000003000FE0000007FFFFF0000007FFFFF00000060007F00
-0000C0007F800000C0003F800001C0003FC0000180001FC0000180001FC0000300000FE0000300
-000FE0000780000FF000FFF801FFFF80FFF801FFFF8029257EA42E>65 D<FFFFFFE000FFFFFFFC
-0003F0007F0003F0003F8003F0001FC003F0000FE003F0000FE003F0000FF003F0000FF003F000
-07F003F0000FF003F0000FF003F0000FE003F0001FE003F0001FC003F0007F8003F001FE0003FF
-FFF80003FFFFFF0003F0003FC003F0000FE003F00007F003F00007F803F00003F803F00003FC03
-F00003FC03F00003FC03F00003FC03F00003FC03F00003FC03F00003F803F00007F803F0000FF0
-03F0001FE003F0007FC0FFFFFFFF00FFFFFFF80026257EA42C>I<0000FF8008000FFFF018003F
-C03C7800FE0006F801F80003F803F00001F807E00000F80FC00000781FC00000783F800000383F
-800000387F800000187F000000187F00000018FF00000000FF00000000FF00000000FF00000000
-FF00000000FF00000000FF00000000FF00000000FF000000007F000000007F000000187F800000
-183F800000183F800000181FC00000300FC000003007E000006003F00000C001F800018000FE00
-0700003FC01E00000FFFF8000000FFC00025257DA42C>I<FFFFFFE00000FFFFFFFC000003F800
-FF000003F8001FC00003F80007E00003F80003F00003F80001F80003F80001FC0003F80000FC00
-03F80000FE0003F80000FE0003F800007F0003F800007F0003F800007F0003F800007F8003F800
-007F8003F800007F8003F800007F8003F800007F8003F800007F8003F800007F8003F800007F80
-03F800007F8003F800007F8003F800007F0003F800007F0003F800007F0003F80000FE0003F800
-00FE0003F80001FC0003F80001F80003F80003F00003F80007E00003F8001FC00003F800FF8000
-FFFFFFFE0000FFFFFFE0000029257EA42F>I<FFFFFFFF00FFFFFFFF0003F8007F0003F8000F80
-03F800078003F800038003F800038003F800018003F800018003F800018003F80000C003F80600
-C003F80600C003F806000003F806000003F80E000003F81E000003FFFE000003FFFE000003F81E
-000003F80E000003F806000003F806000003F806006003F806006003F800006003F80000C003F8
-0000C003F80000C003F80000C003F80001C003F80003C003F80003C003F8000F8003F8003F80FF
-FFFFFF80FFFFFFFF8023257EA428>I<FFFFFFFE00FFFFFFFE0003F800FE0003F8001F0003F800
-0F0003F800070003F800070003F800030003F800030003F800030003F800018003F806018003F8
-06018003F806000003F806000003F80E000003F81E000003FFFE000003FFFE000003F81E000003
-F80E000003F806000003F806000003F806000003F806000003F800000003F800000003F8000000
-03F800000003F800000003F800000003F800000003F800000003F800000003F8000000FFFFF000
-00FFFFF0000021257EA427>I<FFFFE0FFFFE0FFFFE0FFFFE003F80003F80003F80003F80003F8
-0003F80003F80003F80003F80003F80003F80003F80003F80003F80003F80003F80003F80003F8
-0003F80003F80003F80003F80003F80003F80003F80003F80003F80003F80003F80003F80003FF
-FFFFF80003FFFFFFF80003F80003F80003F80003F80003F80003F80003F80003F80003F80003F8
-0003F80003F80003F80003F80003F80003F80003F80003F80003F80003F80003F80003F80003F8
-0003F80003F80003F80003F80003F80003F80003F80003F80003F800FFFFE0FFFFE0FFFFE0FFFF
-E02B257EA430>72 D<FFFFE0FFFFE003F80003F80003F80003F80003F80003F80003F80003F800
-03F80003F80003F80003F80003F80003F80003F80003F80003F80003F80003F80003F80003F800
-03F80003F80003F80003F80003F80003F80003F80003F80003F80003F80003F80003F800FFFFE0
-FFFFE013257EA417>I<FFFFF000FFFFF00003F8000003F8000003F8000003F8000003F8000003
-F8000003F8000003F8000003F8000003F8000003F8000003F8000003F8000003F8000003F80000
-03F8000003F8000003F8000003F8000003F8000003F8000003F8000603F8000603F8000603F800
-0C03F8000C03F8000C03F8001C03F8001C03F8003C03F8007C03F800F803F803F8FFFFFFF8FFFF
-FFF81F257EA425>76 D<FFF8000000FFF8FFFC000001FFF803FC000001FE00037E0000037E0003
-7E0000037E00037E0000037E00033F0000067E00033F0000067E00031F80000C7E00031F80000C
-7E00030FC000187E00030FC000187E000307E000307E000307E000307E000307E000307E000303
-F000607E000303F000607E000301F800C07E000301F800C07E000300FC01807E000300FC01807E
-0003007E03007E0003007E03007E0003007E03007E0003003F06007E0003003F06007E0003001F
-8C007E0003001F8C007E0003000FD8007E0003000FD8007E00030007F0007E00030007F0007E00
-030007F0007E00030003E0007E00078003E0007E00FFFC01C01FFFF8FFFC01C01FFFF835257EA4
-3A>I<FFF80007FFE0FFFC0007FFE003FE00003C0003FF00001800037F00001800033F80001800
-031FC0001800031FE0001800030FF00018000307F80018000303F80018000301FC0018000300FE
-0018000300FF00180003007F80180003003FC0180003001FC0180003000FE0180003000FF01800
-030007F81800030003FC1800030001FC1800030000FE18000300007F18000300007F9800030000
-3FD8000300001FF8000300000FF80003000007F80003000003F80003000003F80003000001F800
-03000000F800030000007800078000003800FFFC00001800FFFC000018002B257EA430>I<0003
-FF8000001FFFF000007F01FC0001FC007F0003F0001F8007E0000FC00FE0000FE01FC00007F01F
-800003F03F800003F83F800003F87F800003FC7F000001FC7F000001FCFF000001FEFF000001FE
-FF000001FEFF000001FEFF000001FEFF000001FEFF000001FEFF000001FEFF000001FE7F000001
-FC7F000001FC7F800003FC3F800003F83F800003F81FC00007F01FC00007F00FE0000FE007F000
-1FC003F8003F8001FC007F00007F01FC00001FFFF0000003FF800027257DA42E>I<FFFFFFE000
-FFFFFFFC0003F800FF0003F8003F8003F8001FC003F8001FE003F8000FE003F8000FF003F8000F
-F003F8000FF003F8000FF003F8000FF003F8000FF003F8000FE003F8001FE003F8001FC003F800
-3F8003F800FF0003FFFFFC0003FFFFE00003F800000003F800000003F800000003F800000003F8
-00000003F800000003F800000003F800000003F800000003F800000003F800000003F800000003
-F800000003F800000003F8000000FFFFE00000FFFFE0000024257EA42A>I<FFFFFF800000FFFF
-FFF8000003F801FE000003F8007F000003F8003F800003F8001FC00003F8001FC00003F8001FE0
-0003F8001FE00003F8001FE00003F8001FE00003F8001FE00003F8001FC00003F8001FC00003F8
-003F800003F8007F000003F801FE000003FFFFF8000003FFFFC0000003F803F0000003F801F800
-0003F800FC000003F8007E000003F8007E000003F8007F000003F8007F000003F8007F000003F8
-007F000003F8007F800003F8007F800003F8007F800003F8007F806003F8003FC06003F8003FC0
-C003F8001FE1C0FFFFE00FFF80FFFFE001FE002B257EA42E>82 D<00FF008007FFE3800F80F780
-1E001F803C000F807800078078000380F8000380F8000180F8000180FC000180FC000000FF0000
-007FE000007FFF00003FFFE0003FFFF8001FFFFE0007FFFF0003FFFF80007FFF800003FFC00000
-3FC000000FE0000007E0000007E0C00003E0C00003E0C00003E0C00003C0E00003C0F00007C0F8
-000780FC000F00FFC03E00E3FFF800803FE0001B257DA422>I<7FFFFFFFF87FFFFFFFF87E00FE
-01F87800FE00787000FE00386000FE00186000FE0018E000FE001CE000FE000CC000FE000CC000
-FE000CC000FE000CC000FE000C0000FE00000000FE00000000FE00000000FE00000000FE000000
-00FE00000000FE00000000FE00000000FE00000000FE00000000FE00000000FE00000000FE0000
-0000FE00000000FE00000000FE00000000FE00000000FE00000000FE00000000FE00000000FE00
-0000FFFFFE0000FFFFFE0026247EA32B>I<FFFFC003FFE0FFFFC003FFE007F800003C0003F800
-00180003FC0000180001FC0000300001FC0000300001FE0000700000FE0000600000FF0000E000
-007F0000C000007F8000C000003F80018000003F80018000001FC0030000001FC0030000001FE0
-070000000FE0060000000FF00600000007F00C00000007F80C00000003F81800000003F8180000
-0003FC3800000001FC3000000001FE7000000000FE6000000000FF60000000007FC0000000007F
-C0000000003F80000000003F80000000003F80000000001F00000000001F00000000000E000000
-00000E0000002B257FA42E>86 D<FFFF83FFFE01FFF0FFFF83FFFE01FFF007F0001FC0000F0007
-F0001FC000060003F8000FE0000C0003F8000FE0000C0003FC000FF0001C0001FC0007F0001800
-01FC0007F000180000FE000FF800300000FE000FF800300000FE000FFC003000007F0019FC0060
-00007F0019FC006000007F8039FE00E000003F8030FE00C000003F8030FE00C000001FC0607F01
-8000001FC0607F018000001FE0607F818000000FE0C03F830000000FE0C03F830000000FF1C03F
-C700000007F1801FC600000007F1801FC600000003FB000FEC00000003FB000FEC00000003FF00
-0FFC00000001FE0007F800000001FE0007F800000001FE0007F800000000FC0003F000000000FC
-0003F000000000780001E000000000780001E000000000780001E000000000300000C000003C25
-7FA43F>I<7FFFC0FFFE007FFFC0FFFE0003FC000F800001FC0007000001FE000E000000FF000C
-0000007F80180000007F80380000003FC0700000001FE0600000001FE0C00000000FF1C0000000
-07FB8000000007FB0000000003FE0000000001FE0000000000FE0000000000FF00000000007F80
-000000007FC0000000007FC000000000DFE000000001CFF0000000038FF00000000307F8000000
-0603FC0000000E01FC0000001C01FE0000001800FF00000030007F80000070007F800000E0003F
-C00000C0001FE0000180001FE00003C0000FF000FFFC00FFFF80FFFC00FFFF8029257EA42E>I<
-07FF00001FFFC0003E03E0003F01F0003F01F8003F00FC001E00FC000000FC000000FC000000FC
-00003FFC0003FCFC000FC0FC003F00FC007E00FC007E00FC00FC00FC00FC00FC00FC00FC00FC01
-7C007E017C003F067C001FFC3FE007F01FE01B187E971E>97 D<FFC00000FFC000000FC000000F
-C000000FC000000FC000000FC000000FC000000FC000000FC000000FC000000FC000000FC00000
-0FC000000FC3F8000FCFFE000FF81F800FE00FC00FC007E00FC007E00FC003F00FC003F00FC003
-F80FC003F80FC003F80FC003F80FC003F80FC003F80FC003F80FC003F80FC003F00FC003F00FC0
-07E00FC007C00FE00FC00F383F000E1FFE000C07F0001D267EA522>I<007FE003FFF807C07C1F
-80FC1F00FC3F00FC7E00787E0000FE0000FE0000FE0000FE0000FE0000FE0000FE0000FE00007E
-00007F00003F000C1F800C1FC01807E07003FFE0007F0016187E971B>I<0001FF800001FF8000
-001F8000001F8000001F8000001F8000001F8000001F8000001F8000001F8000001F8000001F80
-00001F8000001F80007F1F8003FFDF8007E0FF801F803F803F001F803F001F807E001F807E001F
-80FE001F80FE001F80FE001F80FE001F80FE001F80FE001F80FE001F80FE001F807E001F807E00
-1F803F001F803F003F801F807F800FC0FF8003FF9FF800FE1FF81D267EA522>I<007F0003FFC0
-07C1F00F80F81F00F83F007C7E007C7E007EFE007EFE007EFFFFFEFFFFFEFE0000FE0000FE0000
-7E00007E00007E00063F00061F000C0F801807E07003FFE0007F8017187E971C>I<000FC0007F
-F000F8F001F1F803F1F803E1F807E0F007E00007E00007E00007E00007E00007E00007E000FFFF
-00FFFF0007E00007E00007E00007E00007E00007E00007E00007E00007E00007E00007E00007E0
-0007E00007E00007E00007E00007E00007E00007E00007E0007FFF007FFF0015267EA513>I<01
-FF07C007FFDFE00F83F1E01F01F1E03E00F8007E00FC007E00FC007E00FC007E00FC007E00FC00
-7E00FC003E00F8001F01F0000F83E0000FFFC00011FF00003000000030000000380000003C0000
-003FFFE0001FFFFC001FFFFE000FFFFF001FFFFF803C003F8078000FC0F80007C0F80007C0F800
-07C0F80007C07C000F803E001F001F807E0007FFF80000FFC0001B247E971F>I<FFC00000FFC0
-00000FC000000FC000000FC000000FC000000FC000000FC000000FC000000FC000000FC000000F
-C000000FC000000FC000000FC1F8000FC7FE000FCC3F000FD01F000FF01F800FE01F800FE01F80
-0FC01F800FC01F800FC01F800FC01F800FC01F800FC01F800FC01F800FC01F800FC01F800FC01F
-800FC01F800FC01F800FC01F800FC01F800FC01F80FFFCFFF8FFFCFFF81D267DA522>I<0F001F
-803FC03FC03FC03FC01F800F000000000000000000000000000000FFC0FFC00FC00FC00FC00FC0
-0FC00FC00FC00FC00FC00FC00FC00FC00FC00FC00FC00FC00FC00FC00FC00FC0FFF8FFF80D277E
-A611>I<001E00003F00007F80007F80007F80007F80003F00001E000000000000000000000000
-0000000000000000000001FF8001FF80001F80001F80001F80001F80001F80001F80001F80001F
-80001F80001F80001F80001F80001F80001F80001F80001F80001F80001F80001F80001F80001F
-80001F80001F80001F80001F80001F80781F80FC1F00FC3F00FC3E00787C003FF8000FE0001132
-83A613>I<FFC00000FFC000000FC000000FC000000FC000000FC000000FC000000FC000000FC0
-00000FC000000FC000000FC000000FC000000FC000000FC07FC00FC07FC00FC01E000FC018000F
-C030000FC060000FC0C0000FC380000FC700000FCF00000FDF80000FFFC0000FE7C0000FC7E000
-0F83F0000F81F0000F80F8000F80FC000F807E000F803E000F803F000F801F80FFF8FFF0FFF8FF
-F01C267EA520>I<FFC0FFC00FC00FC00FC00FC00FC00FC00FC00FC00FC00FC00FC00FC00FC00F
-C00FC00FC00FC00FC00FC00FC00FC00FC00FC00FC00FC00FC00FC00FC00FC00FC00FC00FC00FC0
-0FC0FFFCFFFC0E267EA511>I<FF81FC01FC00FF87FF07FF000F8C1F8C1F800F980F980F800FB0
-0FF00FC00FA00FE00FC00FA00FE00FC00FC00FC00FC00FC00FC00FC00FC00FC00FC00FC00FC00F
-C00FC00FC00FC00FC00FC00FC00FC00FC00FC00FC00FC00FC00FC00FC00FC00FC00FC00FC00FC0
-0FC00FC00FC00FC00FC00FC00FC00FC00FC00FC00FC00FC00FC00FC0FFFCFFFCFFFCFFFCFFFCFF
-FC2E187D9733>I<FF81F800FF87FE000F8C3F000F901F000FB01F800FA01F800FA01F800FC01F
-800FC01F800FC01F800FC01F800FC01F800FC01F800FC01F800FC01F800FC01F800FC01F800FC0
-1F800FC01F800FC01F800FC01F800FC01F80FFFCFFF8FFFCFFF81D187D9722>I<007F800003FF
-F00007C0F8001F807E003F003F003F003F007E001F807E001F80FE001FC0FE001FC0FE001FC0FE
-001FC0FE001FC0FE001FC0FE001FC0FE001FC07E001F807E001F803F003F003F003F001F807E00
-0FC0FC0003FFF000007F80001A187E971F>I<FFC3F800FFCFFE000FF83F800FE00FC00FC00FE0
-0FC007E00FC007F00FC003F00FC003F80FC003F80FC003F80FC003F80FC003F80FC003F80FC003
-F80FC003F80FC007F00FC007F00FC007E00FC00FC00FE01FC00FF83F000FDFFE000FC7F0000FC0
-00000FC000000FC000000FC000000FC000000FC000000FC000000FC000000FC00000FFFC0000FF
-FC00001D237E9722>I<FF87C0FF8FF00F98F80FB1F80FA1F80FA1F80FE0F00FC0000FC0000FC0
-000FC0000FC0000FC0000FC0000FC0000FC0000FC0000FC0000FC0000FC0000FC0000FC000FFFE
-00FFFE0015187E9719>114 D<07F9801FFF803C0F80700380F00180F00180F00180FC0000FF80
-007FFC007FFE003FFF800FFFC003FFC0001FE00003E0C001E0C001E0E001E0E001C0F003C0FC07
-80EFFF00C3FC0013187E9718>I<00600000600000600000600000E00000E00001E00001E00003
-E00007E0001FE000FFFFC0FFFFC007E00007E00007E00007E00007E00007E00007E00007E00007
-E00007E00007E00007E00007E06007E06007E06007E06007E06007E06003E0C003F0C001FF8000
-7E0013237FA218>I<FFC1FF80FFC1FF800FC01F800FC01F800FC01F800FC01F800FC01F800FC0
-1F800FC01F800FC01F800FC01F800FC01F800FC01F800FC01F800FC01F800FC01F800FC01F800F
-C01F800FC03F800FC03F8007C07F8007E0DF8003FF9FF800FE1FF81D187D9722>I<FFF80FF8FF
-F80FF80FC003C00FE0018007E0030007E0030003F0060003F0060003F80E0001F80C0001FC1C00
-00FC180000FE1800007E3000007E3000003F6000003F6000001FC000001FC000001FC000000F80
-00000F800000070000000700001D187F9720>I<FFF9FFE0FF80FFF9FFE0FF801FC03F001C000F
-C01F0018000FC01F80180007E01F80300007E01F80300007F01FC0700003F037C0600003F037C0
-600001F877E0C00001F863E0C00001FC63F1C00000FCC1F1800000FCC1F18000007FC1FB000000
-7F80FB0000007F80FF0000003F007E0000003F007E0000001F007C0000001E003C0000001E003C
-0000000C0018000029187F972C>I<FFF83FF0FFF83FF00FC00F0007E00C0003F01C0003F83800
-01FC700000FCE000007EC000003F8000003F8000001F8000000FC000001FE000001FF0000033F8
-000071F80000E0FC0001C07E0003807F0003003F000F001F80FFC07FF8FFC07FF81D187F9720>
-I<FFF80FF8FFF80FF80FC003C00FE0018007E0030007E0030003F0060003F0060003F80E0001F8
-0C0001FC1C0000FC180000FE1800007E3000007E3000003F6000003F6000001FC000001FC00000
-1FC000000F8000000F800000070000000700000006000000060000000C0000300C0000781C0000
-FC180000FC380000FC70000078E000007FC000001F0000001D237F9720>I<3FFFF83FFFF83E03
-F03807F0300FE0700FC0701F80603F80603F00607E0000FE0000FC0001F80003F81803F01807E0
-180FE0180FC0381F80303F80707F00707E01F0FFFFF0FFFFF015187E971B>I<FFFFFFFCFFFFFF
-FC1E02808F1F>I<FFFFFFFFFFFFFFF0FFFFFFFFFFFFFFF03C02808F3D>I
-E end
-%%EndProlog
-%%BeginSetup
-%%Feature: *Resolution 300
-TeXDict begin 
-%%EndSetup
-%%Page: 1 1
-bop 0 2617 a @beginspecial 72 @llx 72 @lly 504 @urx 700 @ury
-4320 @rwi @setspecial
-%%BeginDocument: ctrcover.ps
-
-gsave
-       /inch { 72 mul} def
-       .9 setgray
-       /Helvetica-Bold findfont 130 scalefont setfont
-       gsave
-               6.5 inch 7.5 inch moveto 
-               -90 rotate
-               (cygnus) true charpath fill
-       grestore
-
-       gsave
-               5 inch 7.5 inch moveto
-               -90 rotate
-               (reports) true charpath fill
-       grestore
-grestore
-%%EndDocument
- @endspecial 1696 350 a Fr(CTR)p Fq(\017\017)p Fr({)p Fq(\017\017)0
-563 y Fp(libbfd)p 277 542 1326 9 v 1359 w(DRAFT)0 870 y Fr(The)20
-b(Binary)h(File)f(Descriptor)h(Library)0 978 y(First)f(Edition|)p
-Fo(bfd)h Fr(v)n(ersion)h Fo(<)e Fr(2.0)0 1036 y(April)h(1991)0
-1850 y Fn(Stev)n(e)i(Cham)n(b)r(erlain)0 1916 y(Cygn)n(us)f(Supp)r(ort)300
-2659 y Fr(1)e(August)h(1991)p eop
-%%Page: 2 2
-bop 1328 233 a Fm(Cygn)o(us)15 b(Supp)q(ort)1288 283 y(stev)o(e@cygn)o
-(us.com)1267 333 y Fl(BFD)p Fm(,)f(Revision:)22 b(1.5)849 382
-y(T)874 392 y(E)899 382 y(Xinfo)16 b(2.50,)e(Cygn)o(us)h(TR)30
-b(Revision:)22 b(1.6)300 2085 y(Cop)o(yrigh)o(t)526 2084 y(c)514
-2085 y Fq(\015)15 b Fm(1991)f(F)l(ree)h(Soft)o(w)o(are)f(F)l(oundation,)h
-(Inc.)300 2147 y(P)o(ermission)g(is)f(gran)o(ted)f(to)h(mak)o(e)f(and)h
-(distribute)h(v)o(erbatim)f(copies)h(of)f(this)300 2197 y(man)o(ual)g(pro)o
-(vided)h(the)g(cop)o(yrigh)o(t)f(notice)h(and)f(this)h(p)q(ermission)g
-(notice)g(are)300 2247 y(preserv)o(ed)h(on)f(all)h(copies.)300
-2309 y(P)o(ermission)22 b(is)g(gran)o(ted)f(to)g(cop)o(y)g(and)h(distribute)h
-(mo)q(di\014ed)g(v)o(ersions)e(of)300 2359 y(this)f(man)o(ual)f(under)h(the)f
-(conditions)i(for)d(v)o(erbatim)h(cop)o(ying,)i(sub)s(ject)e(to)300
-2408 y(the)h(terms)f(of)g(the)g(GNU)g(General)h(Public)i(License,)g(whic)o(h)
-e(includes)i(the)300 2458 y(pro)o(vision)16 b(that)f(the)g(en)o(tire)h
-(resulting)g(deriv)o(ed)g(w)o(ork)f(is)g(distributed)i(under)300
-2508 y(the)e(terms)g(of)g(a)g(p)q(ermission)h(notice)g(iden)o(tical)h(to)e
-(this)g(one.)300 2570 y(P)o(ermission)d(is)g(gran)o(ted)f(to)f(cop)o(y)i(and)
-f(distribute)i(translations)e(of)g(this)h(man-)300 2620 y(ual)18
-b(in)o(to)f(another)g(language,)h(under)g(the)f(ab)q(o)o(v)o(e)g(conditions)i
-(for)e(mo)q(di\014ed)300 2670 y(v)o(ersions.)p eop
-%%Page: 1 3
-bop 0 -58 a Fk(Chapter)13 b(1:)k(Intro)q(duction)p 377 -66
-698 3 v 723 w(DRAFT)p 1217 -66 V 723 w Fj(1)0 183 y Fi(1)41
-b(In)n(tro)r(duction)300 299 y Fm(Simply)13 b(put,)e Fh(bfd)g
-Fm(is)g(a)g(pac)o(k)m(age)g(whic)o(h)h(allo)o(w)f(applications)i(to)d(use)h
-(the)g(same)300 349 y(routines)19 b(to)f(op)q(erate)h(on)g(ob)s(ject)f
-(\014les)i(whatev)o(er)e(the)h(ob)s(ject)f(\014le)i(format.)300
-399 y(A)15 b(di\013eren)o(t)g(ob)s(ject)g(\014le)h(format)d(can)j(b)q(e)f
-(supp)q(orted)h(simply)g(b)o(y)f(creating)g(a)300 449 y(new)g(BFD)g(bac)o(k)g
-(end)h(and)f(adding)h(it)g(to)e(the)i(library)l(.)300 512 y(BFD)f(is)g(split)
-i(in)o(to)e(t)o(w)o(o)f(parts;)g(the)h(fron)o(t)f(end)i(and)g(the)f(man)o(y)g
-(bac)o(k)g(ends.)337 575 y Fq(\017)30 b Fm(The)15 b(fron)o(t)f(end)i(of)e
-(bfd)i(pro)o(vides)f(the)g(in)o(terface)h(to)e(the)h(user.)20
-b(It)15 b(man-)390 625 y(ages)h(memory)l(,)f(and)i(v)m(arious)f(canonical)i
-(data)d(structures.)23 b(The)16 b(fron)o(t)390 675 y(end)i(also)e(decides)j
-(whic)o(h)f(bac)o(k)e(end)i(to)e(use,)h(and)g(when)h(to)e(call)i(bac)o(k)390
-725 y(end)e(routines.)337 788 y Fq(\017)30 b Fm(The)22 b(bac)o(k)g(ends)h
-(pro)o(vide)f(bfd)g(its)h(view)f(of)g(the)g(real)g(w)o(orld.)40
-b(Eac)o(h)390 837 y(bac)o(k)15 b(end)g(pro)o(vides)g(a)g(set)f(of)h(calls)h
-(whic)o(h)f(the)g(bfd)g(fron)o(t)f(end)i(can)f(use)390 887
-y(to)j(main)o(tain)i(its)f(canonical)h(form.)30 b(The)19 b(bac)o(k)g(ends)h
-(also)e(ma)o(y)h(k)o(eep)390 937 y(around)c(information)h(for)e(their)i(o)o
-(wn)e(use,)i(for)e(greater)h(e\016ciency)l(.)0 1099 y Fn(1.1)33
-b(History)300 1191 y Fm(One)12 b(spur)g(b)q(ehind)h Fh(bfd)e
-Fm(w)o(as)g(the)g(In)o(tel)i(Oregon's)e(GNU)g(960)f(team)h(desire)i(for)300
-1241 y(in)o(terop)q(erabilit)o(y)g(of)e(applications)i(on)f(their)g(COFF)f
-(and)g(b.out)g(\014le)i(formats.)300 1290 y(Cygn)o(us)i(w)o(as)f(pro)o
-(viding)i(GNU)e(supp)q(ort)h(for)g(the)g(team,)f(and)h(Cygn)o(us)f(w)o(ere)
-300 1340 y(con)o(tracted)h(to)f(pro)o(vid)i(the)f(required)h(functionalit)o
-(y)l(.)300 1403 y(The)11 b(name)h(came)f(from)f(a)h(con)o(v)o(ersation)g(Gum)
-o(b)o(y)g(W)l(allace)h(w)o(as)e(ha)o(ving)i(with)300 1453 y(Ric)o(hard)i
-(Stallman)f(ab)q(out)g(the)g(library)l(,)h(RMS)f(said)g(that)f(it)i(w)o(ould)
-f(b)q(e)g(quite)300 1503 y(hard,)i(Gum)o(b)o(y)f(said)i(BFD.)f(\(Stallman)g
-(w)o(as)g(righ)o(t,)f(but)h(the)h(name)f(stuc)o(k\).)300 1566
-y(A)o(t)f(the)g(same)g(time,)g(Ready)h(Systems)f(w)o(an)o(ted)g(m)o(uc)o(h)g
-(the)g(same)g(thing,)h(but)300 1616 y(for)20 b(di\013eren)o(t)h(ob)s(ject)f
-(\014le)i(formats,)e(IEEE-695,)i(Oasys,)f(Srecords,)h(a.out)300
-1666 y(and)15 b(68k)g(co\013.)300 1729 y(BFD)10 b(w)o(as)f(\014rst)h
-(implemen)o(ted)i(b)o(y)e(Stev)o(e)g(Cham)o(b)q(erlain)h(\(stev)o(e)p
-Fh(@)p Fm(cygn)o(us.com\),)p 1979 1740 21 46 v 300 1779 a(John)g(Gilmore)f
-(\(gn)o(u)p Fh(@)p Fm(cygn)o(us.com\),)g(K.)g(Ric)o(hard)h(Pixley)g(\(ric)o
-(h)p Fh(@)p Fm(cygn)o(us.com\))p 1979 1790 V 300 1828 a(and)g(Gum)o(b)o(y)f
-(W)l(allace)i(\(gum)o(b)o(y)p Fh(@)p Fm(cygn)o(us.com\))c(at)i(Cygn)o(us)h
-(Supp)q(ort)g(in)g(P)o(alo)300 1878 y(Alto,)k(California.)0
-2040 y Fn(1.2)33 b(Ho)n(w)21 b(It)h(W)-6 b(orks)300 2132 y
-Fm(T)l(o)15 b(use)g(the)h(library)l(,)g(include)h Fh(bfd.h)e
-Fm(and)g(link)i(with)e Fh(libbfd.a)p Fm(.)308 2195 y Fh(bfd)h
-Fm(pro)o(vides)h(a)f(common)g(in)o(terface)h(to)f(the)h(parts)e(of)h(an)h(ob)
-s(ject)f(\014le)h(to)f(a)300 2245 y(calling)h(application.)300
-2308 y(When)g(an)g(application)i(sucessfully)f(op)q(ens)g(a)e(target)g
-(\014le)i(\(ob)s(ject,)e(arc)o(hiv)o(e)300 2358 y(or)k(whatev)o(er\))g(a)h(p)
-q(oin)o(ter)h(to)e(an)h(in)o(ternal)h(structure)e(is)i(returned.)37
-b(This)300 2408 y(p)q(oin)o(ter)16 b(p)q(oin)o(ts)f(to)g(structure)g(describ)
-q(ed)i(in)g Fh(include/bfd.h)p Fm(,)c(called)k Fh(bfd)p Fm(.)300
-2457 y(Con)o(v)o(en)o(tionally)c(this)h(p)q(oin)o(ter)f(is)g(called)i(a)d
-Fh(bfd)p Fm(,)h(and)g(instances)g(of)g(it)g(within)300 2507
-y(co)q(de)19 b(are)g(called)42 b Fh(abfd)p Fm(.)31 b(All)20
-b(op)q(erations)f(on)g(the)f(target)g(ob)s(ject)g(\014le)i(are)300
-2557 y(applied)c(as)e(metho)q(ds)h(to)e(the)i Fh(bfd)p Fm(,)e(the)i(mapping)g
-(is)f(de\014ned)i(within)g Fh(bfd.h)300 2607 y Fm(in)g(a)f(set)g(of)g
-(macros,)f(all)i(b)q(eginning)h Fh(bfd)p 1027 2607 14 2 v 16
-w Fm(something.)300 2670 y(F)l(or)e(example,)g(this)h(sequence)g(w)o(ould)g
-(do)f(what)g(y)o(ou)f(exp)q(ect:)0 2770 y Fk(c)6 b(y)g(g)g(n)g(u)g(s)36
-b(s)6 b(u)g(p)g(p)g(o)g(r)g(t)p 332 2761 1396 3 v 1421 w(Revision:)17
-b(1.5)p eop
-%%Page: 2 4
-bop 0 -58 a Fk(Chapter)13 b(1:)k(Intro)q(duction)p 377 -66
-698 3 v 723 w(DRAFT)p 1217 -66 V 723 w Fj(2)300 26 y Fg(\013)p
-325 26 1326 2 v 1325 w(\010)p 300 473 2 424 v 314 112 a Fh(#include)23
-b("bfd.h")314 212 y(unsigned)g(int)g(number_of_sections\(abfd\))314
-262 y(bfd)h(*abfd;)314 311 y({)362 361 y(return)f
-(bfd_count_sections\(abfd\);)314 411 y(})p 1677 473 V 300 499
-a Fg(\012)p 325 499 1326 2 v 1325 w(\011)300 613 y Fm(The)18
-b(metaphor)e(used)i(within)32 b Fh(bfd)17 b Fm(is)h(that)e(an)i(ob)s(ject)e
-(\014le)j(has)e(a)g(header,)300 663 y(a)f(n)o(um)o(bb)q(er)h(of)f(sections)h
-(con)o(taining)g(ra)o(w)e(data,)h(a)g(set)g(of)g(relo)q(cations)h(and)300
-712 y(some)i(sym)o(b)q(ol)g(information.)32 b(Also,)43 b Fh(bfd)p
-Fm(s)19 b(op)q(ened)h(up)q(on)g(arc)o(hiv)o(es)f(ha)o(v)o(e)300
-762 y(the)g(additional)i(attribute)d(of)h(an)g(index)h(and)g(con)o(tained)f
-(sub)h(bfds.)31 b(This)300 812 y(approac)o(h)12 b(is)i(\014nd)f(for)f(a.out)g
-(and)h(co\013,)f(but)h(lo)q(oses)g(e\016ciency)i(when)e(applied)300
-862 y(to)i(formats)e(suc)o(h)j(as)f(S-records)g(and)h(IEEE-695.)0
-1027 y Fn(1.3)33 b(What)23 b(BFD)f(V)-6 b(ersion)23 b(1)f(Can't)g(Do)300
-1120 y Fm(As)c(di\013eren)o(t)h(information)f(from)g(the)g(the)g(ob)s(ject)g
-(\014les)h(is)g(required,)g(BFD)300 1169 y(reads)j(from)g(di\013eren)o(t)g
-(sections)h(of)f(the)h(\014le)g(and)g(pro)q(cesses)f(them.)42
-b(F)l(or)300 1219 y(example)13 b(a)f(v)o(ery)g(common)f(op)q(eration)i(for)e
-(the)i(link)o(er)g(is)g(pro)q(cessing)g(sym)o(b)q(ol)300 1269
-y(tables.)19 b(Eac)o(h)10 b(BFD)h(bac)o(k)f(end)i(pro)o(vides)f(a)g(routine)g
-(for)f(con)o(v)o(erting)h(b)q(et)o(w)o(een)300 1319 y(the)16
-b(ob)s(ject)f(\014le's)h(represen)o(tation)g(of)f(sym)o(b)q(ols)h(and)g(an)f
-(in)o(ternal)i(canonical)300 1369 y(format.)k(When)16 b(the)g(link)o(er)h
-(asks)e(for)g(the)h(sym)o(b)q(ol)g(table)h(of)e(an)h(ob)s(ject)f(\014le,)300
-1418 y(it)j(calls)h(through)e(the)h(memory)f(p)q(oin)o(ter)h(to)f(the)g
-(relev)m(an)o(t)i(BFD)e(bac)o(k)g(end)300 1468 y(routine)k(whic)o(h)g(reads)f
-(and)h(con)o(v)o(erts)e(the)h(table)h(in)o(to)f(a)g(canonical)i(form.)300
-1518 y(The)e(link)o(er)i(then)e(op)q(erates)g(up)q(on)h(the)g(common)e(form.)
-35 b(When)20 b(the)h(link)300 1568 y(is)c(\014nished)h(and)e(the)h(link)o(er)
-g(writes)f(the)h(sym)o(b)q(ol)f(table)h(of)f(the)g(output)g(\014le,)300
-1618 y(another)10 b(BFD)g(bac)o(k)h(end)g(routine)g(is)g(called)i(whic)o(h)e
-(tak)o(es)f(the)g(newly)i(created)300 1668 y(sym)o(b)q(ol)k(table)f(and)h
-(con)o(v)o(erts)e(it)h(in)o(to)h(the)f(c)o(hosen)g(output)g(format.)0
-1816 y Fr(1.3.1)30 b(Information)19 b(Loss)300 1909 y Ff(Some)f(information)g
-(is)h(lost)f(due)g(to)g(the)g(nature)g(of)f(the)i(\014le)g(format.)27
-b Fm(The)300 1958 y(output)15 b(targets)e(supp)q(orted)i(b)o(y)g(BFD)f(do)h
-(not)f(pro)o(vide)i(iden)o(tical)g(facilities,)300 2008 y(and)e(information)f
-(whic)o(h)h(ma)o(y)f(b)q(e)h(describ)q(ed)i(in)e(one)f(form)g(has)g(no)o
-(where)h(to)300 2058 y(go)h(in)h(another)f(format.)k(One)d(example)g(of)f
-(this)h(is)g(alignmen)o(t)g(information)300 2108 y(in)62 b
-Fh(b.out)p Fm(.)40 b(There)22 b(is)g(no)o(where)g(in)g(an)62
-b Fh(a.out)21 b Fm(format)g(\014le)h(to)g(store)300 2158 y(alignmen)o(t)14
-b(information)f(on)h(the)f(con)o(tained)h(data,)f(so)f(when)i(a)f(\014le)i
-(is)e(link)o(ed)300 2208 y(from)h Fh(b.out)f Fm(and)i(an)f
-Fh(a.out)f Fm(image)i(is)g(pro)q(duced,)g(alignmen)o(t)g(information)300
-2257 y(will)20 b(not)e(propagate)f(to)h(the)g(output)g(\014le.)31
-b(\(The)18 b(link)o(er)h(will)h(still)g(use)f(the)300 2307
-y(alignmen)o(t)14 b(information)g(in)o(ternally)l(,)i(so)d(the)h(link)h(is)f
-(p)q(erformed)g(correctly\).)300 2371 y(Another)j(example)h(is)f(COFF)g
-(section)g(names.)25 b(COFF)17 b(\014les)h(ma)o(y)e(con)o(tain)300
-2421 y(an)21 b(unlimited)j(n)o(um)o(b)q(er)e(of)f(sections,)i(eac)o(h)e(one)h
-(with)g(a)f(textual)g(section)300 2471 y(name.)e(If)14 b(the)f(target)f(of)h
-(the)h(link)h(is)f(a)f(format)f(whic)o(h)i(do)q(es)f(not)g(ha)o(v)o(e)g(man)o
-(y)300 2521 y(sections)20 b(\(eg)43 b Fh(a.out)p Fm(\))19 b(or)f(has)h
-(sections)h(without)g(names)f(\(eg)g(the)g(Oasys)300 2570 y(format\))f(the)i
-(link)h(cannot)f(b)q(e)g(done)g(simply)l(.)36 b(Y)l(ou)20 b(can)f(circum)o(v)
-o(en)o(t)i(this)300 2620 y(problem)d(b)o(y)f(describing)i(the)e(desired)h
-(input-to-output)g(section)f(mapping)300 2670 y(with)f(the)f(link)o(er)h
-(command)f(language.)0 2770 y Fk(c)6 b(y)g(g)g(n)g(u)g(s)36
-b(s)6 b(u)g(p)g(p)g(o)g(r)g(t)p 332 2761 1396 3 v 1421 w(Revision:)17
-b(1.5)p eop
-%%Page: 3 5
-bop 0 -58 a Fk(Chapter)13 b(1:)k(Intro)q(duction)p 377 -66
-698 3 v 723 w(DRAFT)p 1217 -66 V 723 w Fj(3)300 183 y Ff(Information)g(can)g
-(b)q(e)g(lost)g(during)g(canonicalization.)27 b Fm(The)17 b(BFD)f(in)o
-(ternal)300 233 y(canonical)k(form)d(of)h(the)g(external)h(formats)e(is)h
-(not)g(exhaustiv)o(e;)i(there)e(are)300 283 y(structures)11
-b(in)h(input)h(formats)c(for)i(whic)o(h)h(there)g(is)g(no)f(direct)h
-(represen)o(tation)300 333 y(in)o(ternally)l(.)22 b(This)16
-b(means)g(that)e(the)i(BFD)f(bac)o(k)g(ends)h(cannot)f(main)o(tain)h(all)300
-382 y(p)q(ossible)i(data)e(ric)o(hness)h(through)f(the)h(transformation)e(b)q
-(et)o(w)o(een)i(external)300 432 y(to)e(in)o(ternal)h(and)f(bac)o(k)g(to)g
-(external)g(formats.)300 495 y(This)i(limitation)g(is)f(only)h(a)f(problem)g
-(when)h(using)f(the)g(link)o(er)i(to)d(read)h(one)300 545 y(format)j(and)i
-(write)f(another.)35 b(Eac)o(h)20 b(BFD)g(bac)o(k)g(end)h(is)g(resp)q
-(onsible)i(for)300 595 y(main)o(taining)16 b(as)f(m)o(uc)o(h)h(data)e(as)h(p)
-q(ossible,)i(and)e(the)h(in)o(ternal)g(BFD)f(canon-)300 645
-y(ical)23 b(form)e(has)h(structures)g(whic)o(h)h(are)e(opaque)i(to)e(the)h
-(BFD)g(core,)h(and)300 694 y(exp)q(orted)17 b(only)h(to)e(the)h(bac)o(k)g
-(ends.)26 b(When)17 b(a)g(\014le)h(is)g(read)f(in)h(one)f(format,)300
-744 y(the)c(canonical)i(form)d(is)i(generated)f(for)g(BFD)f(and)i(the)f(link)
-o(er.)20 b(A)o(t)13 b(the)g(same)300 794 y(time,)h(the)g(bac)o(k)g(end)g(sa)o
-(v)o(es)f(a)o(w)o(a)o(y)f(an)o(y)i(information)g(whic)o(h)h(ma)o(y)e
-(otherwise)300 844 y(b)q(e)g(lost.)19 b(If)13 b(the)g(data)f(is)i(then)f
-(written)f(bac)o(k)h(in)h(the)e(same)h(format,)e(the)i(bac)o(k)300
-894 y(end)18 b(routine)h(will)g(b)q(e)g(able)f(to)f(use)i(the)e(canonical)i
-(form)f(pro)o(vided)g(b)o(y)g(the)300 943 y(BFD)d(core)g(as)g(w)o(ell)h(as)f
-(the)h(information)f(it)h(prepared)g(earlier.)21 b(Since)c(there)300
-993 y(is)d(a)f(great)g(deal)h(of)f(commonalit)o(y)g(b)q(et)o(w)o(een)h(bac)o
-(k)f(ends,)h(this)g(mec)o(hanism)g(is)300 1043 y(v)o(ery)f(useful.)20
-b(There)13 b(is)g(no)g(information)g(lost)g(for)f(this)h(reason)g(when)g
-(linking)300 1093 y(big)k(endian)h(COFF)e(to)g(little)i(endian)g(COFF,)e(or)g
-(from)25 b Fh(a.out)16 b Fm(to)25 b Fh(b.out)p Fm(.)300 1143
-y(When)c(a)f(mixture)h(of)e(formats)g(is)i(link)o(ed,)i(the)e(information)f
-(is)h(only)g(lost)300 1193 y(from)14 b(the)i(\014les)g(whose)f(format)f
-(di\013ers)h(from)g(the)g(destination.)0 1330 y Fr(1.3.2)30
-b(Mec)n(hanism)300 1422 y Fm(The)17 b(greatest)f(p)q(oten)o(tial)i(for)f
-(loss)g(of)g(information)g(is)g(when)h(there)f(is)h(least)300
-1472 y(o)o(v)o(erlap)13 b(b)q(et)o(w)o(een)g(the)g(information)g(pro)o(vided)
-h(b)o(y)f(the)g(source)g(format,)f(that)300 1522 y(stored)17
-b(b)o(y)g(the)g(canonical)i(format,)d(and)h(the)h(information)f(needed)i(b)o
-(y)e(the)300 1572 y(destination)j(format.)30 b(A)19 b(brief)h(description)g
-(of)f(the)g(canonical)h(form)f(ma)o(y)300 1622 y(help)d(y)o(ou)f(appreciate)g
-(what)f(kinds)i(of)e(data)g(y)o(ou)h(can)g(coun)o(t)f(on)h(preserving)300
-1671 y(across)f(con)o(v)o(ersions.)300 1734 y Ff(\014les)75
-b Fm(Information)21 b(on)f(target)g(mac)o(hine)i(arc)o(hitecture,)g
-(particular)f(im-)450 1784 y(plemen)o(tation)h(and)g(format)f(t)o(yp)q(e)g
-(are)h(stored)f(on)g(a)h(p)q(er-\014le)h(ba-)450 1834 y(sis.)28
-b(Other)18 b(information)g(includes)i(a)e(demand)g(pageable)g(bit)h(and)450
-1884 y(a)14 b(write)g(protected)g(bit.)20 b(Note)13 b(that)h(information)g
-(lik)o(e)h(Unix)g(magic)450 1934 y(n)o(um)o(b)q(ers)g(is)h(not)e(stored)h
-(here|only)h(the)f(magic)g(n)o(um)o(b)q(ers')g(mean-)450 1983
-y(ing,)i(so)f(a)23 b Fh(ZMAGIC)16 b Fm(\014le)h(w)o(ould)g(ha)o(v)o(e)f(b)q
-(oth)h(the)f(demand)h(pageable)450 2033 y(bit)f(and)f(the)g(write)h
-(protected)f(text)g(bit)g(set.)450 2096 y(The)i(b)o(yte)g(order)g(of)f(the)h
-(target)f(is)h(stored)g(on)g(a)f(p)q(er-\014le)j(basis,)e(so)450
-2146 y(that)12 b(big-)h(and)g(little-endian)i(ob)s(ject)d(\014les)h(ma)o(y)f
-(b)q(e)h(link)o(ed)h(with)f(one)450 2196 y(another.)300 2258
-y Ff(sections)450 2308 y Fm(Eac)o(h)18 b(section)g(in)g(the)g(input)h(\014le)
-g(con)o(tains)f(the)g(name)f(of)h(the)g(sec-)450 2358 y(tion,)c(the)h
-(original)g(address)f(in)h(the)g(ob)s(ject)e(\014le,)j(v)m(arious)e(\015ags,)
-g(size)450 2408 y(and)f(alignmen)o(t)g(information)g(and)g(p)q(oin)o(ters)g
-(in)o(to)g(other)f(BFD)h(data)450 2458 y(structures.)300 2521
-y Ff(sym)o(b)q(ols)450 2570 y Fm(Eac)o(h)h(sym)o(b)q(ol)h(con)o(tains)g(a)f
-(p)q(oin)o(ter)h(to)f(the)g(ob)s(ject)g(\014le)i(whic)o(h)f(orig-)450
-2620 y(inally)22 b(de\014ned)g(it,)f(its)f(name,)h(its)g(v)m(alue,)h(and)e(v)
-m(arious)h(\015ag)f(bits.)450 2670 y(When)14 b(a)f(BFD)g(bac)o(k)g(end)h
-(reads)g(in)g(a)f(sym)o(b)q(ol)h(table,)g(the)f(bac)o(k)g(end)0
-2770 y Fk(c)6 b(y)g(g)g(n)g(u)g(s)36 b(s)6 b(u)g(p)g(p)g(o)g(r)g(t)p
-332 2761 1396 3 v 1421 w(Revision:)17 b(1.5)p eop
-%%Page: 4 6
-bop 0 -58 a Fk(Chapter)13 b(1:)k(Intro)q(duction)p 377 -66
-698 3 v 723 w(DRAFT)p 1217 -66 V 723 w Fj(4)450 183 y Fm(relo)q(cates)k(all)g
-(sym)o(b)q(ols)f(to)g(mak)o(e)g(them)g(relativ)o(e)h(to)f(the)g(base)g(of)450
-233 y(the)c(section)g(where)h(they)f(w)o(ere)f(de\014ned.)24
-b(This)16 b(ensures)h(that)e(eac)o(h)450 283 y(sym)o(b)q(ol)d(p)q(oin)o(ts)h
-(to)e(its)h(con)o(taining)h(section.)19 b(Eac)o(h)12 b(sym)o(b)q(ol)g(also)g
-(has)450 333 y(a)j(v)m(arying)h(amoun)o(t)f(of)g(hidden)j(data)d(to)g(con)o
-(tain)g(priv)m(ate)i(data)e(for)450 382 y(the)j(BFD)f(bac)o(k)g(end.)28
-b(Since)19 b(the)e(sym)o(b)q(ol)h(p)q(oin)o(ts)g(to)f(the)h(original)450
-432 y(\014le,)i(the)e(priv)m(ate)i(data)d(format)g(for)h(that)g(sym)o(b)q(ol)
-h(is)g(accessible.)450 482 y Fh(gld)13 b Fm(can)i(op)q(erate)e(on)h(a)g
-(collection)i(of)d(sym)o(b)q(ols)h(of)g(wildly)i(di\013eren)o(t)450
-532 y(formats)e(without)h(problems.)450 590 y(Normal)k(global)h(and)f(simple)
-i(lo)q(cal)f(sym)o(b)q(ols)g(are)f(main)o(tained)h(on)450 640
-y(output,)f(so)f(an)h(output)g(\014le)g(\(no)g(matter)e(its)i(format\))e
-(will)k(retain)450 690 y(sym)o(b)q(ols)14 b(p)q(oin)o(ting)g(to)f(functions)h
-(and)g(to)e(global,)i(static,)f(and)h(com-)450 740 y(mon)e(v)m(ariables.)21
-b(Some)13 b(sym)o(b)q(ol)g(information)f(is)i(not)e(w)o(orth)g(retain-)450
-789 y(ing;)k(in)j Fh(a.out)c Fm(t)o(yp)q(e)h(information)g(is)g(stored)f(in)i
-(the)e(sym)o(b)q(ol)i(table)450 839 y(as)e(long)g(sym)o(b)q(ol)h(names.)k
-(This)c(information)g(w)o(ould)f(b)q(e)h(useless)h(to)450 889
-y(most)12 b(COFF)h(debuggers)h(and)f(ma)o(y)g(b)q(e)h(thro)o(wn)f(a)o(w)o(a)o
-(y)e(with)j(appro-)450 939 y(priate)f(command)f(line)i(switc)o(hes.)20
-b(\(The)12 b(GNU)h(debugger)g Fh(gdb)f Fm(do)q(es)450 989 y(supp)q(ort)j
-Fh(a.out)g Fm(st)o(yle)g(debugging)h(information)g(in)g(COFF\).)450
-1047 y(There)21 b(is)h(one)f(w)o(ord)g(of)g(t)o(yp)q(e)g(information)g
-(within)i(the)e(sym)o(b)q(ol,)450 1097 y(so)h(if)h(the)g(format)e(supp)q
-(orts)i(sym)o(b)q(ol)g(t)o(yp)q(e)g(information)g(within)450
-1146 y(sym)o(b)q(ols)18 b(\(for)e(example)i(COFF,)e(IEEE,)h(Oasys\))g(and)h
-(the)f(t)o(yp)q(e)g(is)450 1196 y(simple)g(enough)f(to)f(\014t)g(within)i
-(one)f(w)o(ord)f(\(nearly)h(ev)o(erything)g(but)450 1246 y(aggregates\))d
-(the)j(information)f(will)i(b)q(e)f(preserv)o(ed.)300 1304
-y Ff(relo)q(cation)g(lev)o(el)450 1354 y Fm(Eac)o(h)h(canonical)h(BFD)e(relo)
-q(cation)h(record)g(con)o(tains)g(a)f(p)q(oin)o(ter)i(to)450
-1404 y(the)f(sym)o(b)q(ol)g(to)f(relo)q(cate)h(to,)f(the)g(o\013set)g(of)g
-(the)h(data)f(to)g(relo)q(cate,)450 1454 y(the)h(section)g(the)f(data)g(is)h
-(in)g(and)g(a)f(p)q(oin)o(ter)h(to)f(a)g(relo)q(cation)h(t)o(yp)q(e)450
-1503 y(descriptor.)37 b(Relo)q(cation)22 b(is)g(p)q(erformed)f(e\013ectiv)o
-(ely)h(b)o(y)e(message)450 1553 y(passing)h(through)f(the)g(relo)q(cation)h
-(t)o(yp)q(e)f(descriptor)h(and)g(sym)o(b)q(ol)450 1603 y(p)q(oin)o(ter.)44
-b(It)24 b(allo)o(ws)f(relo)q(cations)h(to)f(b)q(e)h(p)q(erformed)f(on)g
-(output)450 1653 y(data)17 b(using)i(a)e(relo)q(cation)h(metho)q(d)g(only)h
-(a)o(v)m(ailable)g(in)g(one)f(of)f(the)450 1703 y(input)j(formats.)30
-b(F)l(or)19 b(instance,)h(Oasys)f(pro)o(vides)h(a)e(b)o(yte)h(relo)q(ca-)450
-1753 y(tion)h(format.)31 b(A)20 b(relo)q(cation)g(record)f(requesting)h(this)
-g(relo)q(cation)450 1802 y(t)o(yp)q(e)e(w)o(ould)f(p)q(oin)o(t)h(indirectly)i
-(to)d(a)g(routine)h(to)f(p)q(erform)g(this,)h(so)450 1852 y(the)e(relo)q
-(cation)h(ma)o(y)e(b)q(e)i(p)q(erformed)f(on)g(a)g(b)o(yte)g(b)q(eing)h
-(written)g(to)450 1902 y(a)e(COFF)h(\014le,)g(ev)o(en)h(though)e(68k)g(COFF)h
-(has)f(no)h(suc)o(h)g(relo)q(cation)450 1952 y(t)o(yp)q(e.)300
-2010 y Ff(line)h(n)o(um)o(b)q(ers)450 2060 y Fm(Ob)s(ject)k(formats)e(can)i
-(con)o(tain,)g(for)f(debugging)i(purp)q(oses,)g(some)450 2110
-y(form)14 b(of)h(mapping)g(b)q(et)o(w)o(een)g(sym)o(b)q(ols,)g(source)g(line)
-i(n)o(um)o(b)q(ers,)e(and)450 2159 y(addresses)f(in)g(the)g(output)g(\014le.)
-20 b(These)14 b(addresses)g(ha)o(v)o(e)f(to)g(b)q(e)h(relo-)450
-2209 y(cated)h(along)g(with)h(the)f(sym)o(b)q(ol)g(information.)20
-b(Eac)o(h)15 b(sym)o(b)q(ol)h(with)450 2259 y(an)j(asso)q(ciated)g(list)g(of)
-f(line)j(n)o(um)o(b)q(er)e(records)f(p)q(oin)o(ts)h(to)g(the)f(\014rst)450
-2309 y(record)13 b(of)g(the)g(list.)20 b(The)14 b(head)g(of)e(a)h(line)i(n)o
-(um)o(b)q(er)f(list)g(consists)f(of)g(a)450 2359 y(p)q(oin)o(ter)h(to)e(the)i
-(sym)o(b)q(ol,)f(whic)o(h)h(allo)o(ws)g(divination)h(of)e(the)g(address)450
-2408 y(of)19 b(the)g(function)g(whose)g(line)i(n)o(um)o(b)q(er)e(is)g(b)q
-(eing)i(describ)q(ed.)33 b(The)450 2458 y(rest)18 b(of)h(the)g(list)g(is)g
-(made)g(up)g(of)g(pairs:)27 b(o\013sets)18 b(in)o(to)h(the)f(section)450
-2508 y(and)f(line)h(n)o(um)o(b)q(ers.)23 b(An)o(y)17 b(format)e(whic)o(h)i
-(can)g(simply)g(deriv)o(e)h(this)450 2558 y(information)13
-b(can)g(pass)g(it)g(successfully)i(b)q(et)o(w)o(een)e(formats)e(\(COFF,)450
-2608 y(IEEE)k(and)h(Oasys\).)300 2670 y(What)f(is)g(a)g(bac)o(k)o(end)0
-2770 y Fk(c)6 b(y)g(g)g(n)g(u)g(s)36 b(s)6 b(u)g(p)g(p)g(o)g(r)g(t)p
-332 2761 1396 3 v 1421 w(Revision:)17 b(1.5)p eop
-%%Page: 5 7
-bop 0 -58 a Fk(Chapter)13 b(2:)k(BFD)c(front)g(end)p 413 -66
-680 3 v 703 w(DRAFT)p 1236 -66 V 705 w Fj(5)0 183 y Fi(2)41
-b(BFD)27 b(fron)n(t)f(end)0 396 y Fn(2.1)33 b(t)n(yp)r(edef)22
-b(bfd)300 488 y Fm(P)o(oin)o(ters)16 b(to)g(bfd)h(structs)f(are)g(the)h
-(cornerstone)f(of)h(an)o(y)f(application)i(using)300 538 y(libbfd.)33
-b(References)20 b(though)e(the)h(bfd)h(and)f(to)f(data)g(in)i(the)f(bfd)g
-(giv)o(e)g(the)300 588 y(en)o(tire)d(bfd)f(functionalit)o(y)l(.)300
-651 y(Finally!)22 b(The)15 b(BFD)g(struct)g(itself.)21 b(This)16
-b(con)o(tains)f(the)h(ma)s(jor)d(data)i(ab)q(out)300 701 y(the)g(\014le,)h
-(and)g(con)o(tains)f(p)q(oin)o(ters)g(to)g(the)g(rest)g(of)g(the)g(data.)390
-751 y Fh(struct)23 b(_bfd)390 801 y({)300 864 y Ff(The)15 b(\014lename)i(the)
-e(application)i(op)q(ened)f(the)f(bfd)h(with.)438 914 y Fh(CONST)23
-b(char)g(*filename;)300 977 y Ff(A)15 b(p)q(oin)o(ter)h(to)e(the)i(target)e
-(jump)h(table.)438 1027 y Fh(struct)23 b(bfd_target)f(*xvec;)300
-1090 y Ff(T)l(o)14 b(a)o(v)o(oid)g(dragging)g(to)q(o)g(man)o(y)g(header)h
-(\014les)g(in)o(to)f(ev)o(ery)h(\014le)g(that)g(includes)300
-1140 y(bfd.h,)f(IOSTREAM)h(has)e(b)q(een)i(declared)g(as)f(a)f
-Fh(")p Ff(c)o(har)g(*)p Fh(")p Ff(,)h(and)f(MTIME)j(as)300
-1190 y(a)e Fh(")p Ff(long)p Fh(")p Ff(.)19 b(Their)c(correct)e(t)o(yp)q(es,)h
-(to)f(whic)o(h)i(they)f(are)g(cast)f(when)i(used,)f(are)300
-1240 y Fh(")p Ff(FILE)h(*)p Fh(")g Ff(and)h Fh(")p Ff(time)p
-710 1240 14 2 v 16 w(t)p Fh(")p Ff(.)300 1303 y(The)f(iostream)g(is)h(the)f
-(result)h(of)f(an)g(fop)q(en)g(on)h(the)f(\014lename.)438 1353
-y Fh(char)23 b(*iostream;)300 1416 y Ff(Is)15 b(the)h(\014le)g(b)q(eing)g
-(cac)o(hed)g(See)g(Chapter)f(3)g([File)h(Cac)o(hing],)e(page)i(45.)438
-1466 y Fh(boolean)23 b(cacheable;)300 1529 y Ff(Marks)12 b(whether)h(there)g
-(w)o(as)g(a)f(default)i(target)e(sp)q(eci\014ed)j(when)e(the)g(bfd)h(w)o(as)
-300 1579 y(op)q(ened.)33 b(This)19 b(is)h(used)g(to)e(select)i(what)e(matc)o
-(hing)i(algorithm)f(to)f(use)i(to)300 1629 y(c)o(hose)e(the)d(bac)o(k)g(end.)
-438 1679 y Fh(boolean)23 b(target_defaulted;)300 1742 y Ff(The)15
-b(cac)o(hing)h(routines)g(use)f(these)h(to)e(main)o(tain)i(an)f(LR)o(U)h
-(list)g(of)f(bfds.)438 1792 y Fh(struct)23 b(_bfd)g(*lru_prev,)g(*lru_next;)
-300 1855 y Ff(When)e(a)f(\014le)i(is)f(closed)g(b)o(y)g(the)f(cac)o(hing)i
-(routines,)g(it)e(retains)h(the)g(state)300 1905 y(here:)438
-1955 y Fh(file_ptr)h(where;)300 2018 y Ff(and)15 b(here:)438
-2068 y Fh(boolean)23 b(opened_once;)438 2118 y(boolean)g(mtime_set;)300
-2181 y Ff(File)16 b(mo)q(di\014ed)h(time)438 2231 y Fh(long)23
-b(mtime;)300 2294 y Ff(F)l(or)15 b(output)g(\014les,)g(c)o(hannel)i(w)o(e)e
-(lo)q(c)o(k)o(ed)h(\(is)f(this)h(used?\).)390 2344 y Fh(int)23
-b(ifd;)300 2407 y Ff(The)15 b(format)f(whic)o(h)i(b)q(elongs)g(to)f(the)g
-(bfd.)438 2457 y Fh(bfd_format)22 b(format;)300 2521 y Ff(The)15
-b(direction)i(the)e(bfd)h(w)o(as)e(op)q(ened)i(with)438 2570
-y Fh(enum)23 b(bfd_direction)f({no_direction)g(=)i(0,)939 2620
-y(read_direction)e(=)i(1,)939 2670 y(write_direction)e(=)h(2,)0
-2770 y Fk(c)6 b(y)g(g)g(n)g(u)g(s)36 b(s)6 b(u)g(p)g(p)g(o)g(r)g(t)p
-332 2761 1396 3 v 1421 w(Revision:)17 b(1.5)p eop
-%%Page: 6 8
-bop 0 -58 a Fk(Chapter)13 b(2:)k(BFD)c(front)g(end)p 413 -66
-680 3 v 703 w(DRAFT)p 1236 -66 V 705 w Fj(6)939 183 y Fh(both_direction)22
-b(=)i(3})f(direction;)300 246 y Ff(F)l(ormat)p 449 246 14 2
-v 15 w(sp)q(eci\014c)17 b(\015ags)438 296 y Fh(flagword)22
-b(flags;)300 359 y Ff(Curren)o(tly)d(m)o(y)p 575 359 V 16 w(arc)o(hiv)o(e)f
-(is)i(tested)e(b)q(efore)h(adding)g(origin)g(to)f(an)o(ything.)31
-b(I)300 409 y(b)q(eliev)o(e)16 b(that)e(this)g(can)h(b)q(ecome)f(alw)o(a)o
-(ys)g(an)g(add)g(of)g(origin,)h(with)f(origin)h(set)300 458
-y(to)g(0)f(for)h(non)g(arc)o(hiv)o(e)h(\014les.)438 508 y Fh(file_ptr)22
-b(origin;)300 571 y Ff(Remem)o(b)q(er)11 b(when)g(output)f(has)g(b)q(egun,)i
-(to)e(stop)f(strange)h(things)h(happ)q(ening.)438 621 y Fh(boolean)23
-b(output_has_begun;)300 684 y Ff(P)o(oin)o(ter)15 b(to)f(link)o(ed)j(list)f
-(of)f(sections)438 734 y Fh(struct)23 b(sec)47 b(*sections;)300
-797 y Ff(The)15 b(n)o(um)o(b)q(er)h(of)f(sections)438 846 y
-Fh(unsigned)22 b(int)i(section_count;)300 909 y Ff(Stu\013)15
-b(only)h(usefull)h(for)d(ob)s(ject)h(\014les:)21 b(The)16 b(start)e(address.)
-438 959 y Fh(bfd_vma)23 b(start_address;)300 1022 y Ff(Used)16
-b(for)e(input)i(and)g(output)438 1072 y Fh(unsigned)22 b(int)i(symcount;)300
-1135 y Ff(Sym)o(tab)15 b(for)f(output)h(bfd)438 1184 y Fh(struct)23
-b(symbol_cache_entry)45 b(**outsymbols;)300 1247 y Ff(Arc)o(hitecture)16
-b(of)f(ob)s(ject)f(mac)o(hine,)i(eg)f(m68k)438 1297 y Fh(enum)23
-b(bfd_architecture)f(obj_arch;)300 1360 y Ff(P)o(articular)15
-b(mac)o(hine)h(within)h(arc)o(h,)d(e.g.)20 b(68010)438 1410
-y Fh(unsigned)i(long)i(obj_machine;)300 1473 y Ff(Stu\013)15
-b(only)h(usefull)h(for)d(arc)o(hiv)o(es:)438 1523 y Fh(PTR)23
-b(arelt_data;)438 1572 y(struct)g(_bfd)g(*my_archive;)438 1622
-y(struct)g(_bfd)g(*next;)438 1672 y(struct)g(_bfd)g(*archive_head;)438
-1722 y(boolean)g(has_armap;)300 1785 y Ff(Used)16 b(b)o(y)f(the)g(bac)o(k)g
-(end)h(to)f(hold)h(priv)m(ate)f(data.)438 1834 y Fh(PTR)23
-b(tdata;)300 1897 y Ff(Used)16 b(b)o(y)f(the)g(application)i(to)d(hold)i
-(priv)m(ate)g(data)438 1947 y Fh(PTR)23 b(usrdata;)300 2010
-y Ff(Where)15 b(all)h(the)g(allo)q(cated)g(stu\013)e(under)i(this)g(BFD)f(go)
-q(es)438 2060 y Fh(struct)23 b(obstack)g(memory;)390 2110 y(};)0
-2248 y Fr(2.1.0.1)30 b(bfd)p 296 2248 19 3 v 22 w(set)p 394
-2248 V 22 w(start)p 543 2248 V 22 w(address)300 2340 y Fm(Marks)15
-b(the)i(en)o(try)e(p)q(oin)o(t)i(of)f(an)g(output)g(bfd.)23
-b(Returns)g Fh(true)15 b Fm(on)h(success,)300 2390 y Fh(false)e
-Fm(otherwise.)390 2440 y Fh(PROTO\(boolean,)22 b(bfd_set_start_address,\(bfd)
-e(*,)k(bfd_vma\)\);)p 2002 2446 21 38 v 0 2578 a Fr(2.1.0.2)30
-b(bfd)p 296 2578 19 3 v 22 w(get)p 401 2578 V 21 w(m)n(time)300
-2670 y Fm(Return)25 b(cac)o(hed)f(\014le)i(mo)q(di\014cation)f(time)f(\(e.g.)
-46 b(as)24 b(read)g(from)g(arc)o(hiv)o(e)0 2770 y Fk(c)6 b(y)g(g)g(n)g(u)g(s)
-36 b(s)6 b(u)g(p)g(p)g(o)g(r)g(t)p 332 2761 1396 3 v 1421 w(Revision:)17
-b(1.5)p eop
-%%Page: 7 9
-bop 0 -58 a Fk(Chapter)13 b(2:)k(BFD)c(front)g(end)p 413 -66
-680 3 v 703 w(DRAFT)p 1236 -66 V 705 w Fj(7)300 183 y Fm(header)23
-b(for)f(arc)o(hiv)o(e)g(mem)o(b)q(ers,)i(or)e(from)g(\014le)h(system)f(if)h
-(w)o(e)f(ha)o(v)o(e)g(b)q(een)300 233 y(called)17 b(b)q(efore\);)e(else)h
-(determine)g(mo)q(dify)g(time,)f(cac)o(he)g(it,)g(and)h(return)f(it.)390
-283 y Fh(PROTO\(long,)22 b(bfd_get_mtime,)g(\(bfd)i(*\)\);)0
-416 y Fr(2.1.0.3)30 b(stu\013)300 475 y Fg(\013)p 325 475 1326
-2 v 1325 w(\010)p 300 2068 2 1570 v 314 611 a Fh(#define)23
-b(bfd_sizeof_headers\(abfd,)e(reloc\))i(\\)433 661 y(BFD_SEND)g(\(abfd,)g
-(_bfd_sizeof_headers,)e(\(abfd,)i(reloc\)\))314 760 y(#define)g
-(bfd_find_nearest_line\(abfd)o(,)e(section,)i(symbols,)g(off-)314
-810 y(set,)g(filename_ptr,)g(func,)g(line_ptr\))f(\\)433 860
-y(BFD_SEND)h(\(abfd,)g(_bfd_find_nearest_line,)45 b(\(abfd,)23
-b(sec-)314 910 y(tion,)g(symbols,)g(offset,)g(filename_ptr,)f(func,)h
-(line_ptr\)\))314 1009 y(#define)g(bfd_debug_info_start\(abfd\))d(\\)505
-1059 y(BFD_SEND)j(\(abfd,)g(_bfd_debug_info_start,)e(\(abfd\)\))314
-1159 y(#define)i(bfd_debug_info_end\(abfd\))e(\\)505 1209 y(BFD_SEND)i
-(\(abfd,)g(_bfd_debug_info_end,)e(\(abfd\)\))314 1308 y(#define)i
-(bfd_debug_info_accumulate\()o(abfd,)e(section\))h(\\)505 1358
-y(BFD_SEND)h(\(abfd,)g(_bfd_debug_info_accumulat)o(e,)e(\(abfd,)314
-1408 y(section\)\))314 1507 y(#define)i(bfd_stat_arch_elt\(abfd,)e(stat\))i
-(\\)505 1557 y(BFD_SEND)g(\(abfd,)g(_bfd_stat_arch_elt,\(abfd,)d(stat\)\))314
-1657 y(#define)j(bfd_coff_swap_aux_in\(a,e,t)o(,c,i\))e(\\)505
-1707 y(BFD_SEND)i(\(a,)g(_bfd_coff_swap_aux_in,)e(\(a,e,t,c,i\)\))314
-1806 y(#define)i(bfd_coff_swap_sym_in\(a,e,i)o(\))e(\\)505
-1856 y(BFD_SEND)i(\(a,)g(_bfd_coff_swap_sym_in,)e(\(a,e,i\)\))314
-1956 y(#define)i(bfd_coff_swap_lineno_in\(a,)o(e,i\))e(\\)505
-2006 y(BFD_SEND)i(\()h(a,)f(_bfd_coff_swap_lineno_in,)e(\(a,e,i\)\))p
-1677 2068 V 300 2094 a Fg(\012)p 325 2094 1326 2 v 1325 w(\011)0
-2770 y Fk(c)6 b(y)g(g)g(n)g(u)g(s)36 b(s)6 b(u)g(p)g(p)g(o)g(r)g(t)p
-332 2761 1396 3 v 1421 w(Revision:)17 b(1.5)p eop
-%%Page: 8 10
-bop 0 -58 a Fk(Chapter)13 b(2:)k(BFD)c(front)g(end)p 413 -66
-680 3 v 703 w(DRAFT)p 1236 -66 V 705 w Fj(8)0 183 y Fn(2.2)33
-b(Memory)22 b(Usage)300 277 y Fm(BFD)17 b(k)o(eeps)h(all)h(its)f(in)o(ternal)
-g(structures)g(in)g(obstac)o(ks.)27 b(There)18 b(is)g(one)g(ob-)300
-327 y(stac)o(k)c(p)q(er)g(op)q(en)i(bfd)e(\014le,)i(in)o(to)e(whic)o(h)h(the)
-g(curren)o(t)f(state)g(is)g(stored.)20 b(When)300 376 y(a)c(bfd)h(is)h
-(closed,)f(the)g(obstac)o(k)f(is)h(deleted,)h(and)f(so)f(ev)o(erything)i
-(whic)o(h)f(has)300 426 y(b)q(een)f(allo)q(cated)h(b)o(y)e(libbfd)i(for)d
-(the)i(closing)g(\014le)g(will)h(b)q(e)f(thro)o(wn)e(a)o(w)o(a)o(y)l(.)300
-491 y(BFD)j(will)h(not)f(free)g(an)o(ything)g(created)h(b)o(y)f(an)g
-(application,)h(but)g(p)q(oin)o(ters)300 540 y(in)o(to)d(bfd)g(structures)g
-(will)h(b)q(e)g(in)o(v)m(alidated)h(on)d(a)h Fh(bfd_close)p
-Fm(;)e(for)h(example,)300 590 y(after)h(a)k Fh(bfd_close)c
-Fm(the)g(v)o(ector)g(passed)h(to)j Fh(bfd_canonicalize_symtab)300
-640 y Fm(will)h(still)g(b)q(e)f(around,)f(since)i(it)e(has)g(b)q(een)i(allo)q
-(cated)f(b)o(y)f(the)h(application,)300 690 y(but)c(the)h(data)e(that)h(it)g
-(p)q(oin)o(ted)h(to)f(will)i(b)q(e)f(lost.)300 754 y(The)g(general)g(rule)g
-(is)g(not)f(to)g(close)i(a)e(bfd)h(un)o(til)g(all)h(op)q(erations)e(dep)q
-(enden)o(t)300 804 y(up)q(on)j(data)g(from)f(the)g(bfd)i(ha)o(v)o(e)e(b)q
-(een)i(completed,)g(or)e(all)i(the)f(data)f(from)300 854 y(within)k(the)f
-(\014le)h(has)e(b)q(een)i(copied.)35 b(T)l(o)19 b(help)i(with)g(the)e
-(managemen)o(t)g(of)300 904 y(memory)l(,)g(there)g(is)h(a)e(function)i(\()i
-Fh(bfd_alloc_size)p Fm(\))16 b(whic)o(h)k(returns)f(the)300
-953 y(n)o(um)o(b)q(er)e(of)f(b)o(ytes)g(in)h(obstac)o(ks)f(asso)q(ciated)g
-(with)h(the)g(supplied)h(bfd.)24 b(This)300 1003 y(could)15
-b(b)q(e)f(used)g(to)g(select)g(the)g(greediest)g(op)q(en)h(bfd,)f(close)g(it)
-g(to)f(reclaim)i(the)300 1053 y(memory)l(,)f(p)q(erform)g(some)h(op)q
-(eration)g(and)g(reop)q(en)g(the)g(bfd)g(again,)f(to)g(get)g(a)300
-1103 y(fresh)h(cop)o(y)g(of)g(the)g(data)g(structures.)0 1276
-y Fn(2.3)33 b(Sections)300 1370 y Fm(Sections)16 b(are)f(supp)q(orted)h(in)g
-(bfd)f(in)h Fh(section.c)p Fm(.)300 1434 y(The)f(ra)o(w)f(data)g(con)o
-(tained)h(within)h(a)f(bfd)g(is)g(main)o(tained)h(through)f(the)g(sec-)300
-1484 y(tion)f(abstraction.)19 b(A)13 b(single)i(bfd)f(ma)o(y)f(ha)o(v)o(e)g
-(an)o(y)h(n)o(um)o(b)q(er)g(of)f(sections,)h(and)300 1534 y(k)o(eeps)k(hold)h
-(of)e(them)h(b)o(y)g(p)q(oin)o(ting)h(to)e(the)h(\014rst,)g(eac)o(h)g(one)g
-(p)q(oin)o(ts)h(to)e(the)300 1584 y(next)e(in)h(the)g(list.)0
-1736 y Fr(2.3.1)30 b(Section)20 b(Input)300 1829 y Fm(When)15
-b(a)f(bfd)h(is)g(op)q(ened)g(for)f(reading,)h(the)g(section)g(structures)f
-(are)g(created)300 1879 y(and)h(attatc)o(hed)g(to)f(the)i(bfd.)300
-1943 y(Eac)o(h)h(section)g(has)g(a)f(name)h(whic)o(h)h(describ)q(es)g(the)f
-(section)h(in)f(the)g(outside)300 1993 y(w)o(orld)i(-)g(for)f(example,)44
-b Fh(a.out)18 b Fm(w)o(ould)h(con)o(tain)g(at)g(least)g(three)g(sections,)300
-2043 y(called)e Fh(.text)p Fm(,)d Fh(.data)g Fm(and)i Fh(.bss)p
-Fm(.)300 2107 y(Sometimes)e(a)g(bfd)g(will)i(con)o(tain)e(more)f(than)h(the)g
-('natural')f(n)o(um)o(b)q(er)h(of)g(sec-)300 2157 y(tions.)20
-b(A)13 b(bac)o(k)h(end)h(ma)o(y)e(attatc)o(h)f(other)i(sections)g(con)o
-(taining)h(constructor)300 2207 y(data,)h(or)g(an)g(application)i(ma)o(y)e
-(add)h(a)f(section)h(\(using)g(bfd)p 1362 2207 14 2 v 17 w(mak)o(e)p
-1483 2207 V 16 w(section\))300 2257 y(to)f(the)h(sections)g(attatc)o(hed)f
-(to)h(an)f(already)h(op)q(en)h(bfd.)25 b(F)l(or)16 b(example,)i(the)300
-2307 y(link)o(er)d(creates)f(a)g(sup)q(ern)o(umary)g(section)g
-Fh(COMMON)g Fm(for)f(eac)o(h)h(input)h(\014le's)g(bfd)300 2357
-y(to)g(hold)h(information)f(ab)q(out)g(common)g(storage.)300
-2421 y(The)22 b(ra)o(w)f(data)h(is)g(not)g(necessarily)h(read)f(in)h(at)e
-(the)h(same)g(time)g(as)g(the)300 2471 y(section)f(descriptor)f(is)h
-(created.)35 b(Some)20 b(targets)f(ma)o(y)g(lea)o(v)o(e)h(the)h(data)e(in)300
-2521 y(place)e(un)o(til)g(a)i Fh(bfd_get_section_contents)13
-b Fm(call)k(is)f(made.)22 b(Other)16 b(bac)o(k)300 2570 y(ends)f(ma)o(y)e
-(read)h(in)h(all)h(the)e(data)f(at)h(once)g(-)h(F)l(or)e(example;)i(an)f
-(S-record)h(\014le)300 2620 y(has)g(to)f(b)q(e)i(read)e(once)i(to)e
-(determine)i(the)f(size)h(of)e(the)h(data.)k(An)c(IEEE-695)300
-2670 y(\014le)22 b(do)q(esn't)f(con)o(tain)h(ra)o(w)e(data)g(in)i(sections,)h
-(but)e(data)g(and)g(relo)q(cation)0 2770 y Fk(c)6 b(y)g(g)g(n)g(u)g(s)36
-b(s)6 b(u)g(p)g(p)g(o)g(r)g(t)p 332 2761 1396 3 v 1421 w(Revision:)17
-b(1.5)p eop
-%%Page: 9 11
-bop 0 -58 a Fk(Chapter)13 b(2:)k(BFD)c(front)g(end)p 413 -66
-680 3 v 703 w(DRAFT)p 1236 -66 V 705 w Fj(9)300 183 y Fm(expressions)j(in)o
-(termixed,)g(so)e(the)h(data)f(area)h(has)g(to)f(b)q(e)h(parsed)h(to)e(get)g
-(out)300 233 y(the)h(data)g(and)g(relo)q(cations.)0 368 y Fr(2.3.2)30
-b(Section)20 b(Output)300 459 y Fm(T)l(o)i(write)g(a)f(new)h(ob)s(ject)g(st)o
-(yle)g(bfd,)h(the)f(v)m(arious)h(sections)f(to)f(b)q(e)i(writ-)300
-509 y(ten)j(ha)o(v)o(e)f(to)g(b)q(e)h(created.)52 b(They)26
-b(are)f(attatc)o(hed)g(to)g(the)g(bfd)h(in)h(the)300 559 y(same)19
-b(w)o(a)o(y)g(as)g(input)i(sections,)f(data)f(is)h(written)g(to)f(the)h
-(sections)g(using)300 608 y Fh(bfd_set_section_contents)p Fm(.)300
-671 y(The)d(link)o(er)h(uses)g(the)f(\014elds)29 b Fh(output_section)15
-b Fm(and)27 b Fh(output_offset)16 b Fm(to)300 721 y(create)f(an)g(output)g
-(\014le.)300 783 y(The)i(data)g(to)g(b)q(e)g(written)h(comes)f(from)f(input)i
-(sections)g(attatc)o(hed)e(to)h(the)300 833 y(output)h(sections.)30
-b(The)18 b(output)g(section)h(structure)f(can)h(b)q(e)g(considered)g(a)300
-883 y(\014lter)14 b(for)f(the)h(input)h(section,)f(the)g(output)f(section)i
-(determines)f(the)g(vma)f(of)300 933 y(the)h(output)h(data)e(and)i(the)f
-(name,)g(but)h(the)f(input)i(section)f(determines)g(the)300
-982 y(o\013set)f(in)o(to)h(the)h(output)f(section)g(of)g(the)g(data)g(to)g(b)
-q(e)g(written.)300 1045 y(Eg)e(to)f(create)h(a)f(section)i
-Fh(")p Fm(O)p Fh(")p Fm(,)f(starting)f(at)g(0x100,)g(0x123)g(long,)h(con)o
-(taining)300 1095 y(t)o(w)o(o)19 b(subsections,)j Fh(")p Fm(A)p
-Fh(")e Fm(at)g(o\013set)g(0x0)f(\(ie)i(at)f(vma)g(0x100\))f(and)h
-Fh(")p Fm(B)p Fh(")h Fm(at)300 1144 y(o\013set)14 b(0x20)h(\(ie)g(at)g(vma)f
-(0x120\))g(the)h(structures)g(w)o(ould)h(lo)q(ok)f(lik)o(e:)300
-1186 y Fg(\013)p 325 1186 1326 2 v 1325 w(\010)p 300 1832 2
-623 v 386 1322 a Fh(section)23 b(name)238 b("A")433 1372 y(output_offset)70
-b(0x00)433 1422 y(size)286 b(0x20)433 1471 y(output_section)22
-b(----------->)46 b(section)23 b(name)95 b("O")1006 1521 y(|)g(vma)310
-b(0x100)386 1571 y(section)23 b(name)238 b("B")23 b(|)95 b(size)286
-b(0x123)433 1621 y(output_offset)70 b(0x20)95 b(|)433 1671
-y(size)286 b(0x103)71 b(|)433 1720 y(output_section)46 b(--------|)p
-1677 1832 V 300 1858 a Fg(\012)p 325 1858 1326 2 v 1325 w(\011)0
-2042 y Fr(2.3.3)30 b(t)n(yp)r(edef)20 b(asection)300 2134 y
-Fm(The)15 b(shap)q(e)h(of)f(a)g(section)h(struct:)390 2184
-y Fh(typedef)23 b(struct)g(sec)g({)300 2246 y Ff(The)c(name)f(of)g(the)g
-(section,)h(the)g(name)f(isn't)g(a)g(cop)o(y)l(,)h(the)f(p)q(oin)o(ter)h(is)i
-(the)300 2296 y(same)15 b(as)g(that)f(passed)i(to)e(bfd)p 835
-2296 14 2 v 17 w(mak)o(e)p 956 2296 V 16 w(section.)485 2346
-y Fh(CONST)24 b(char)f(*name;)300 2408 y Ff(The)15 b(next)h(section)f(in)i
-(the)e(list)h(b)q(elonging)h(to)d(the)h(bfd,)h(or)e(NULL.)485
-2458 y Fh(struct)23 b(sec)h(*next;)300 2521 y Ff(The)14 b(\014eld)h(\015ags)f
-(con)o(tains)g(attributes)f(of)h(the)g(section.)19 b(Some)14
-b(of)g(these)i(\015ags)300 2570 y(are)d(read)h(in)g(from)f(the)h(ob)s(ject)f
-(\014le,)h(and)g(some)f(are)h(syn)o(thesized)g(from)f(other)300
-2620 y(information.)390 2670 y Fh(flagword)23 b(flags;)0 2770
-y Fk(c)6 b(y)g(g)g(n)g(u)g(s)36 b(s)6 b(u)g(p)g(p)g(o)g(r)g(t)p
-332 2761 1396 3 v 1421 w(Revision:)17 b(1.5)p eop
-%%Page: 10 12
-bop 0 -58 a Fk(Chapter)13 b(2:)k(BFD)c(front)g(end)p 413 -66
-669 3 v 691 w(DRAFT)p 1224 -66 V 695 w Fj(10)390 183 y Fh(#define)23
-b(SEC_NO_FLAGS)70 b(0x000)300 246 y Ff(T)l(ells)22 b(the)e(OS)h(to)e(allo)q
-(cate)i(space)f(for)g(this)g(section)h(when)g(loaded.)35 b(This)300
-296 y(w)o(ould)16 b(clear)f(for)g(a)g(section)h(con)o(taining)f(debug)h
-(information)g(only)l(.)390 346 y Fh(#define)23 b(SEC_ALLOC)142
-b(0x001)300 409 y Ff(T)l(ells)21 b(the)f(OS)g(to)f(load)h(the)f(section)h
-(from)f(the)h(\014le)g(when)g(loading.)34 b(This)300 458 y(w)o(ould)16
-b(b)q(e)f(clear)h(for)f(a)g(.bss)f(section)390 508 y Fh(#define)23
-b(SEC_LOAD)166 b(0x002)300 571 y Ff(The)15 b(section)f(con)o(tains)h(data)f
-(still)h(to)f(b)q(e)h(relo)q(cated,)g(so)f(there)g(will)i(b)q(e)f(some)300
-621 y(relo)q(cation)h(information)f(to)q(o.)390 671 y Fh(#define)23
-b(SEC_RELOC)142 b(0x004)300 733 y Ff(Obsolete)16 b(?)390 783
-y Fh(#define)23 b(SEC_BALIGN)118 b(0x008)300 846 y Ff(A)15
-b(signal)h(to)f(the)g(OS)h(that)e(the)i(section)f(con)o(tains)h(read)f(only)h
-(data.)390 896 y Fh(#define)23 b(SEC_READONLY)70 b(0x010)300
-959 y Ff(The)15 b(section)h(con)o(tains)f(co)q(de)h(only)l(.)390
-1009 y Fh(#define)23 b(SEC_CODE)166 b(0x020)300 1071 y Ff(The)15
-b(section)h(con)o(tains)f(data)g(only)l(.)390 1121 y Fh(#define)23
-b(SEC_DATA)190 b(0x040)300 1184 y Ff(The)15 b(section)h(will)h(reside)f(in)g
-(R)o(OM.)390 1234 y Fh(#define)23 b(SEC_ROM)190 b(0x080)300
-1297 y Ff(The)19 b(section)g(con)o(tains)g(constructor)e(information.)31
-b(This)19 b(section)g(t)o(yp)q(e)f(is)300 1347 y(used)13 b(b)o(y)g(the)f
-(link)o(er)i(to)e(create)g(lists)h(of)f(constructors)g(and)h(destructors)g
-(used)300 1396 y(b)o(y)34 b Fh(g++)p Ff(.)27 b(When)18 b(a)g(bac)o(k)g(end)g
-(sees)g(a)g(sym)o(b)q(ol)g(whic)o(h)h(should)f(b)q(e)h(used)h(in)300
-1446 y(a)15 b(constructor)f(list,)i(it)g(creates)f(a)g(new)g(section)h(for)f
-(the)g(t)o(yp)q(e)g(of)g(name)j(\(eg)300 1496 y Fh(__CTOR_LIST__)p
-Ff(\),)12 b(attatc)o(hes)i(the)g(sym)o(b)q(ol)h(to)f(it)h(and)g(builds)h(a)f
-(relo)q(cation.)300 1546 y(T)l(o)g(build)i(the)e(lists)g(of)g(constructors,)f
-(all)i(the)f(link)o(er)h(has)f(to)h(to)f(is)g(catenate)300
-1596 y(all)e(the)g(sections)g(called)g Fh(__CTOR_LIST__)e Ff(and)j(relo)q
-(cte)f(the)g(data)e(con)o(tained)300 1645 y(within)16 b(-)g(exactly)f(the)h
-(op)q(erations)f(it)g(w)o(ould)j(p)q(eform)d(on)g(standard)g(data.)390
-1695 y Fh(#define)23 b(SEC_CONSTRUCTOR)f(0x100)300 1758 y Ff(The)17
-b(section)g(is)f(a)g(constuctor,)g(and)h(should)g(b)q(e)g(placed)h(at)d(the)i
-(end)g(of)f(the)300 1808 y(..)390 1858 y Fh(#define)23 b
-(SEC_CONSTRUCTOR_TEXT)e(0x1100)390 1907 y(#define)i(SEC_CONSTRUCTOR_DATA)e
-(0x2100)390 1957 y(#define)i(SEC_CONSTRUCTOR_BSS)45 b(0x3100)300
-2020 y Ff(The)21 b(section)g(has)f(con)o(ten)o(ts)g(-)g(a)g(bss)h(section)g
-(could)g(b)q(e)55 b Fh(SEC_ALLOC)19 b(|)300 2070 y(SEC_HAS_CONTENTS)p
-Ff(,)13 b(a)h(debug)i(section)g(could)g(b)q(e)j Fh(SEC_HAS_CONTENTS)390
-2120 y(#define)k(SEC_HAS_CONTENTS)f(0x200)300 2183 y Ff(An)d(instruction)g
-(to)f(the)g(link)o(er)i(not)e(to)f(output)i(sections)f(con)o(taining)24
-b(this)300 2232 y(\015ag)14 b(ev)o(en)h(if)g(they)g(ha)o(v)o(e)f(information)
-h(whic)o(h)g(w)o(ould)g(normally)g(b)q(e)g(written.)390 2282
-y Fh(#define)23 b(SEC_NEVER_LOAD)f(0x400)300 2345 y Ff(The)15
-b(base)h(address)f(of)g(the)g(section)h(in)g(the)f(address)g(space)h(of)f
-(the)g(target.)462 2395 y Fh(bfd_vma)22 b(vma;)300 2458 y Ff(The)16
-b(size)g(of)g(the)f(section)i(in)f(b)o(ytes)f(of)h(the)f(loaded)i(section.)22
-b(This)16 b(con)o(tains)300 2508 y(a)f(v)m(alue)h(ev)o(en)g(if)g(the)f
-(section)h(has)f(no)g(con)o(ten)o(ts)f(\(eg,)h(the)g(size)h(of)f
-Fh(.bss)p Ff(\).)462 2557 y Fh(bfd_size_type)22 b(size;)300
-2620 y Ff(If)14 b(this)h(section)g(is)f(going)g(to)g(b)q(e)h(output,)e(then)i
-(this)f(v)m(alue)i(is)e(the)j(o\013set)c(in)o(to)300 2670 y(the)k(output)g
-(section)g(of)g(the)g(\014rst)f(b)o(yte)h(in)h(the)f(input)i(section.)25
-b(Eg,)17 b(if)h(this)0 2770 y Fk(c)6 b(y)g(g)g(n)g(u)g(s)36
-b(s)6 b(u)g(p)g(p)g(o)g(r)g(t)p 332 2761 1396 3 v 1421 w(Revision:)17
-b(1.5)p eop
-%%Page: 11 13
-bop 0 -58 a Fk(Chapter)13 b(2:)k(BFD)c(front)g(end)p 413 -66
-669 3 v 691 w(DRAFT)p 1224 -66 V 695 w Fj(11)300 183 y Ff(w)o(as)g(going)g
-(to)g(start)f(at)h(the)g(100th)g(b)o(yte)g(in)i(the)h(output)d(section,)h
-(this)g(v)m(alue)300 233 y(w)o(ould)i(b)q(e)f(100.)462 283
-y Fh(bfd_vma)22 b(output_offset;)300 350 y Ff(The)15 b(output)g(section)h
-(through)f(whic)o(h)h(to)f(map)g(on)g(output.)462 400 y Fh(struct)23
-b(sec)g(*output_section;)300 467 y Ff(The)f(alignmen)o(t)g(requiremen)o(t)g
-(of)g(the)f(section,)j(as)d(an)h(exp)q(onen)o(t)g(-)g(eg)f(3)300
-517 y(aligns)16 b(to)f(2)p Fh(^)p Ff(3)f(\(or)g(8\))462 567
-y Fh(unsigned)22 b(int)i(alignment_power;)300 634 y Ff(If)14
-b(an)f(input)h(section,)g(a)f(p)q(oin)o(ter)h(to)e(a)h(v)o(ector)g(of)g(relo)
-q(cation)h(records)f(for)j(the)300 684 y(data)f(in)h(this)f(section.)462
-733 y Fh(struct)23 b(reloc_cache_entry)e(*relocation;)300 801
-y Ff(If)c(an)g(output)g(section,)h(a)f(p)q(oin)o(ter)h(to)e(a)h(v)o(ector)f
-(of)h(p)q(oin)o(ters)g(to)i(relo)q(cation)300 850 y(records)c(for)g(the)g
-(data)f(in)i(this)g(section.)462 900 y Fh(struct)23 b(reloc_cache_entry)e
-(**orelocation;)300 967 y Ff(The)15 b(n)o(um)o(b)q(er)h(of)f(relo)q(cation)h
-(records)f(in)h(one)f(of)g(the)g(ab)q(o)o(v)o(e)462 1017 y
-Fh(unsigned)22 b(reloc_count;)300 1084 y Ff(Whic)o(h)16 b(section)g(is)f(it)h
-(0..n)o(th)462 1134 y Fh(int)23 b(index;)300 1201 y Ff(Information)15
-b(b)q(elo)o(w)h(is)g(bac)o(k)f(end)h(sp)q(eci\014c)i(-)d(and)h(not)f(alw)o(a)
-o(ys)f(used)i(or)i(up-)300 1251 y(dated)300 1318 y(File)e(p)q(osition)h(of)d
-(section)i(data)462 1368 y Fh(file_ptr)22 b(filepos;)300 1435
-y Ff(File)16 b(p)q(osition)h(of)d(relo)q(cation)i(info)462
-1485 y Fh(file_ptr)22 b(rel_filepos;)300 1552 y Ff(File)16
-b(p)q(osition)h(of)d(line)j(data)462 1602 y Fh(file_ptr)22
-b(line_filepos;)300 1669 y Ff(P)o(oin)o(ter)15 b(to)f(data)h(for)g
-(applications)462 1719 y Fh(PTR)23 b(userdata;)462 1769 y(struct)g
-(lang_output_section)e(*otheruserdata;)300 1836 y Ff(A)o(ttac)o(hed)15
-b(line)i(n)o(um)o(b)q(er)e(information)462 1886 y Fh(alent)23
-b(*lineno;)300 1953 y Ff(Num)o(b)q(er)16 b(of)e(line)j(n)o(um)o(b)q(er)f
-(records)462 2003 y Fh(unsigned)22 b(int)i(lineno_count;)300
-2070 y Ff(When)14 b(a)e(section)i(is)g(b)q(eing)h(output,)e(this)g(v)m(alue)i
-(c)o(hanges)e(as)g(more)i(linen)o(um-)300 2120 y(b)q(ers)h(are)e(written)i
-(out)462 2170 y Fh(file_ptr)22 b(moving_line_filepos;)300 2237
-y Ff(what)15 b(the)g(section)h(n)o(um)o(b)q(er)f(is)h(in)g(the)f(target)f(w)o
-(orld)462 2287 y Fh(unsigned)22 b(int)i(target_index;)462 2336
-y(PTR)f(used_by_bfd;)300 2404 y Ff(If)18 b(this)g(is)g(a)g(constructor)e
-(section)j(then)f(here)g(is)g(a)f(list)i(of)e(the)j(relo)q(cations)300
-2453 y(created)15 b(to)g(relo)q(cate)g(items)h(within)g(it.)462
-2503 y Fh(struct)23 b(relent_chain)f(*constructor_chain;)300
-2570 y Ff(The)15 b(bfd)h(whic)o(h)g(o)o(wns)f(the)g(section.)462
-2620 y Fh(bfd)23 b(*owner;)390 2670 y(})h(asection)e(;)0 2770
-y Fk(c)6 b(y)g(g)g(n)g(u)g(s)36 b(s)6 b(u)g(p)g(p)g(o)g(r)g(t)p
-332 2761 1396 3 v 1421 w(Revision:)17 b(1.5)p eop
-%%Page: 12 14
-bop 0 -58 a Fk(Chapter)13 b(2:)k(BFD)c(front)g(end)p 413 -66
-669 3 v 691 w(DRAFT)p 1224 -66 V 695 w Fj(12)0 183 y Fr(2.3.4)30
-b(section)20 b(protot)n(yp)r(es)0 346 y(2.3.4.1)30 b(bfd)p
-296 346 19 3 v 22 w(get)p 401 346 V 21 w(section)p 607 346
-V 22 w(b)n(y)p 693 346 V 23 w(name)300 437 y Fm(Runs)19 b(through)g(the)f
-(pro)o(vided)i Ff(abfd)g Fm(and)f(returns)f(the)39 b Fh(asection)18
-b Fm(who's)300 487 y(name)c(matc)o(hes)g(that)g(pro)o(vided,)h(otherwise)g
-(NULL.)g(See)g(Section)g(2.3)f([Sec-)300 537 y(tions],)h(page)g(8,)f(for)h
-(more)g(information.)390 587 y Fh(PROTO\(asection)22 b(*,)i
-(bfd_get_section_by_name)o(,)485 637 y(\(bfd)g(*abfd,)f(CONST)g(char)g
-(*name\)\);)0 770 y Fr(2.3.4.2)30 b(bfd)p 296 770 V 22 w(mak)n(e)p
-457 770 V 22 w(section)300 862 y Fm(This)13 b(function)g(creates)f(a)h(new)f
-(empt)o(y)g(section)h(called)i Ff(name)g Fm(and)d(attatc)o(hes)300
-912 y(it)i(to)g(the)g(end)h(of)f(the)g(c)o(hain)h(of)f(sections)h(for)e
-Ff(bfd)p Fm(.)20 b(An)15 b(attempt)e(to)g(create)h(a)300 961
-y(section)i(with)h(a)e(name)h(whic)o(h)g(is)h(already)f(in)h(use,)e(returns)h
-(the)g(old)g(section)300 1011 y(b)o(y)f(that)g(name)g(instead.)300
-1074 y(P)o(ossible)h(errors)f(are:)300 1136 y Fh(invalid_operation)450
-1186 y Fm(If)g(output)g(has)h(already)f(started)f(for)h(this)h(bfd.)300
-1248 y Fh(no_memory)450 1298 y Fm(If)f(obstac)o(k)g(allo)q(c)h(fails.)390
-1348 y Fh(PROTO\(asection)22 b(*,)i(bfd_make_section,)d(\(bfd)i(*,)h(CONST)f
-(char)390 1398 y(*name\)\);)0 1531 y Fr(2.3.4.3)30 b(bfd)p
-296 1531 V 22 w(set)p 394 1531 V 22 w(section)p 601 1531 V
-22 w(\015ags)300 1623 y Fm(A)o(ttempts)15 b(to)h(set)f(the)h(attributes)g(of)
-g(the)g(section)h(named)f(in)h(the)f(bfd)g(sup-)300 1673 y(plied)i(to)e(the)g
-(v)m(alue.)25 b(Returns)16 b(true)h(on)f(success,)h(false)f(on)h(error.)22
-b(P)o(ossible)300 1722 y(error)14 b(returns)i(are:)300 1785
-y Fh(invalid)e(operation)450 1835 y Fm(The)21 b(section)g(cannot)g(ha)o(v)o
-(e)f(one)h(or)f(more)g(of)h(the)f(attributes)h(re-)450 1884
-y(quested.)h(F)l(or)15 b(example,)h(a)g(.bss)f(section)h(in)k
-Fh(a.out)15 b Fm(ma)o(y)g(not)g(ha)o(v)o(e)450 1934 y(the)g
-Fh(SEC_HAS_CONTENTS)e Fm(\014eld)k(set.)390 1984 y Fh(PROTO\(boolean,)22
-b(bfd_set_section_flags,)557 2034 y(\(bfd)h(*,)h(asection)f(*,)g
-(flagword\)\);)0 2168 y Fr(2.3.4.4)30 b(bfd)p 296 2168 V 22
-w(map)p 433 2168 V 22 w(o)n(v)n(er)p 567 2168 V 23 w(sections)300
-2259 y Fm(Calls)20 b(the)g(pro)o(vided)h(function)f Ff(func)j
-Fm(for)c(eac)o(h)h(section)g(attatc)o(hed)f(to)g(the)300 2309
-y(bfd)14 b Ff(abfd)p Fm(,)g(passing)h Ff(ob)s(j)f Fm(as)g(an)g(argumen)o(t.)
-19 b(The)14 b(function)h(will)g(b)q(e)g(called)g(as)300 2359
-y(if)h(b)o(y)438 2408 y Fh(func\(abfd,)22 b(the_section,)g(obj\);)390
-2458 y(PROTO\(void,)g(bfd_map_over_sections,)676 2508 y(\(bfd)i(*abfd,)f
-(void)g(\(*func\)\(\),)g(PTR)g(obj\)\);)300 2570 y Fm(This)13
-b(is)g(the)f(prefered)h(metho)q(d)g(for)e(iterating)i(o)o(v)o(er)e(sections,)
-i(an)g(alternativ)o(e)300 2620 y(w)o(ould)j(b)q(e)f(to)g(use)h(a)e(lo)q(op:)
-462 2670 y Fh(section)22 b(*p;)0 2770 y Fk(c)6 b(y)g(g)g(n)g(u)g(s)36
-b(s)6 b(u)g(p)g(p)g(o)g(r)g(t)p 332 2761 1396 3 v 1421 w(Revision:)17
-b(1.5)p eop
-%%Page: 13 15
-bop 0 -58 a Fk(Chapter)13 b(2:)k(BFD)c(front)g(end)p 413 -66
-669 3 v 691 w(DRAFT)p 1224 -66 V 695 w Fj(13)462 183 y Fh(for)23
-b(\(p)h(=)f(abfd->sections;)f(p)i(!=)f(NULL;)h(p)f(=)h(p->next\))533
-233 y(func\(abfd,)f(p,)g(...\))0 366 y Fr(2.3.4.5)30 b(bfd)p
-296 366 19 3 v 22 w(set)p 394 366 V 22 w(section)p 601 366
-V 22 w(size)300 457 y Fm(Sets)20 b Ff(section)g Fm(to)g(the)g(size)h
-Ff(v)m(al)p Fm(.)34 b(If)21 b(the)f(op)q(eration)g(is)g(ok,)h(then)48
-b Fh(true)19 b Fm(is)300 507 y(returned,)c(else)h Fh(false)p
-Fm(.)300 569 y(P)o(ossible)g(error)f(returns:)300 632 y Fh(invalid_operation)
-450 681 y Fm(W)l(riting)h(has)f(started)f(to)h(the)g(bfd,)g(so)g(setting)g
-(the)h(size)g(is)f(in)o(v)m(alid)390 731 y Fh(PROTO\(boolean,)22
-b(bfd_set_section_size,)509 781 y(\(bfd)i(*,)f(asection)g(*,)h(bfd_size_type)
-e(val\)\);)0 914 y Fr(2.3.4.6)30 b(bfd)p 296 914 V 22 w(set)p
-394 914 V 22 w(section)p 601 914 V 22 w(con)n(ten)n(ts)300
-1005 y Fm(Sets)14 b(the)f(con)o(ten)o(ts)g(of)g(the)h(section)g
-Ff(section)h Fm(in)f(bfd)g Ff(abfd)h Fm(to)e(the)h(data)f(start-)300
-1055 y(ing)19 b(in)h(memory)e(at)g Ff(data)p Fm(.)29 b(The)19
-b(data)f(is)h(written)f(to)g(the)h(output)f(section)300 1105
-y(starting)d(at)f(o\013set)g Ff(o\013set)i Fm(for)e Ff(coun)o(t)i
-Fm(b)o(ytes.)300 1167 y(Normally)g Fh(true)e Fm(is)i(returned,)f(else)h
-Fh(false)p Fm(.)j(P)o(ossible)e(error)d(returns)h(are:)300
-1229 y Fh(no_contents)450 1279 y Fm(The)20 b(output)f(section)h(do)q(es)g
-(not)g(ha)o(v)o(e)f(the)46 b Fh(SEC_HAS_CONTENTS)450 1329 y
-Fm(attribute,)15 b(so)f(nothing)i(can)f(b)q(e)h(written)g(to)e(it.)300
-1391 y Fh(and)h(some)f(more)h(too)300 1454 y Fm(This)c(routine)f(is)h(fron)o
-(t)e(end)i(to)f(the)g(bac)o(k)g(end)h(function)g Fh(_bfd_set_section_conten)o
-(ts)p Fm(.)p 2166 1458 21 36 v 390 1503 a Fh(PROTO\(boolean,)22
-b(bfd_set_section_contents,)605 1553 y(\(bfd)h(*abfd,)605 1603
-y(asection)g(*section,)605 1653 y(PTR)g(data,)605 1703 y(file_ptr)g(offset,)
-605 1753 y(bfd_size_type)f(count\)\);)0 1885 y Fr(2.3.4.7)30
-b(bfd)p 296 1885 19 3 v 22 w(get)p 401 1885 V 21 w(section)p
-607 1885 V 22 w(con)n(ten)n(ts)300 1977 y Fm(This)13 b(function)h(reads)f
-(data)f(from)g Ff(section)h Fm(in)g(bfd)h Ff(abfd)g Fm(in)o(to)f(memory)f
-(start-)300 2027 y(ing)j(at)f Ff(lo)q(cation)p Fm(.)21 b(The)15
-b(data)f(is)h(read)f(at)g(an)h(o\013set)f(of)g Ff(o\013set)h
-Fm(from)e(the)i(start)300 2076 y(of)g(the)g(input)h(section,)g(and)f(is)h
-(read)f(for)f Ff(coun)o(t)i Fm(b)o(ytes.)300 2139 y(If)e(the)g(con)o(ten)o
-(ts)f(of)h(a)g(constuctor)f(with)h(the)g Fh(SEC_CONSTUCTOR)e
-Fm(\015ag)i(set)f(are)300 2188 y(requested,)i(then)h(the)f
-Ff(lo)q(cation)h Fm(is)g(\014lled)h(with)e(zero)q(es.)300 2251
-y(If)g(no)h(errors)e(o)q(ccur,)h Fh(true)g Fm(is)h(returned,)f(else)h
-Fh(false)p Fm(.)j(P)o(ossible)d(errors)f(are:)300 2313 y Fh(unknown)f(yet)390
-2363 y(PROTO\(boolean,)22 b(bfd_get_section_contents,)581 2413
-y(\(bfd)h(*abfd,)g(asection)g(*section,)g(PTR)g(location,)605
-2463 y(file_ptr)g(offset,)f(bfd_size_type)h(count\)\);)0 2770
-y Fk(c)6 b(y)g(g)g(n)g(u)g(s)36 b(s)6 b(u)g(p)g(p)g(o)g(r)g(t)p
-332 2761 1396 3 v 1421 w(Revision:)17 b(1.5)p eop
-%%Page: 14 16
-bop 0 -58 a Fk(Chapter)13 b(2:)k(BFD)c(front)g(end)p 413 -66
-669 3 v 691 w(DRAFT)p 1224 -66 V 695 w Fj(14)0 183 y Fn(2.4)33
-b(Sym)n(b)r(ols)300 352 y Fm(*bfd*)17 b(trys)f(to)g(main)o(tain)i(as)e(m)o
-(uc)o(h)h(sym)o(b)q(ol)h(information)f(as)f(it)h(can)g(when)300
-401 y(it)i(mo)o(v)o(es)g(information)g(from)f(\014le)i(to)f(\014le.)32
-b(*bfd*)19 b(passes)g(information)h(to)300 451 y(applications)f(though)f(the)
-34 b Fh(asymbol)17 b Fm(structure.)27 b(When)18 b(the)g(application)300
-501 y(requests)g(the)g(sym)o(b)q(ol)g(table,)h(BFD)e(reads)h(the)g(table)h
-(in)g(the)f(nativ)o(e)g(form)300 551 y(and)13 b(translates)g(parts)g(of)g(it)
-g(in)o(to)g(the)h(in)o(ternal)g(format.)k(T)l(o)13 b(main)o(tain)g(more)300
-601 y(than)k(the)g(infomation)g(passed)h(to)e(applications)j(some)d(targets)g
-(k)o(eep)h(some)300 650 y(information)j('b)q(ehind)h(the)e(sceans',)h(in)g(a)
-g(structure)f(only)h(the)f(particular)300 700 y(bac)o(k)h(end)g(kno)o(ws)g
-(ab)q(out.)33 b(F)l(or)20 b(example,)h(the)f(co\013)f(bac)o(k)h(end)h(k)o
-(eeps)f(the)300 750 y(original)j(sym)o(b)q(ol)f(table)h(structure)e(as)h(w)o
-(ell)h(as)e(the)h(canonical)h(structure)300 800 y(when)c(a)g(*bfd*)f(is)h
-(read)g(in.)31 b(On)20 b(output,)f(the)g(co\013)f(bac)o(k)g(end)i(can)f
-(recon-)300 850 y(struct)e(the)g(output)h(sym)o(b)q(ol)f(table)h(so)f(that)g
-(no)h(information)f(is)h(lost,)g(ev)o(en)300 899 y(information)d(unique)h(to)
-d(co\013)h(whic)o(h)h(*bfd*)g(do)q(esn't)f(kno)o(w)g(or)g(understand.)300
-949 y(If)19 b(a)g(co\013)f(sym)o(b)q(ol)h(table)h(w)o(as)e(read,)h(but)g(w)o
-(as)g(written)g(through)f(an)h(a.out)300 999 y(bac)o(k)g(end,)i(all)f(the)f
-(co\013)g(sp)q(eci\014c)i(information)e(w)o(ould)h(b)q(e)g(lost.)32
-b(\(..)f(un)o(til)300 1049 y(BFD)15 b(2)g(:\).)300 1188 y(The)e(sym)o(b)q(ol)
-g(table)g(of)f(a)g(bfd)h(is)g(not)g(necessarily)h(read)e(in)i(un)o(til)f(a)g
-(canonical-)300 1238 y(ize)k(request)f(is)g(made.)22 b(Then)17
-b(the)f(bfd)g(bac)o(k)g(end)g(\014lls)h(in)g(a)f(table)g(pro)o(vided)300
-1288 y(b)o(y)f(the)g(application)i(with)f(p)q(oin)o(ters)f(to)g(the)g
-(canonical)i(information.)300 1427 y(T)l(o)j(output)g(sym)o(b)q(ols,)h(the)g
-(application)h(pro)o(vides)e(BFD)g(with)h(a)f(table)g(of)300
-1477 y(p)q(oin)o(ters)j(to)e(p)q(oin)o(ters)i(to)63 b Fh(asymbol)p
-Fm(s.)40 b(This)23 b(allo)o(ws)f(applications)i(lik)o(e)300
-1527 y(the)16 b(link)o(er)i(to)d(output)h(a)g(sym)o(b)q(ol)h(as)f(read,)g
-(since)h(the)f('b)q(ehind)i(the)f(sceens')300 1576 y(information)e(will)i(b)q
-(e)f(still)h(a)o(v)m(ailable.)0 2402 y Fr(2.4.1)30 b(Reading)20
-b(Sym)n(b)r(ols)300 2570 y Fm(There)13 b(are)f(t)o(w)o(o)f(stages)g(to)h
-(reading)h(a)f(sym)o(b)q(ol)h(table)g(from)e(a)i(bfd;)g(allo)q(cating)300
-2620 y(storage,)i(and)h(the)g(actual)g(reading)h(pro)q(cess.)22
-b(This)17 b(is)f(an)g(excerpt)h(from)e(an)300 2670 y(appliction)i(whic)o(h)f
-(reads)f(the)h(sym)o(b)q(ol)f(table:)0 2770 y Fk(c)6 b(y)g(g)g(n)g(u)g(s)36
-b(s)6 b(u)g(p)g(p)g(o)g(r)g(t)p 332 2761 1396 3 v 1421 w(Revision:)17
-b(1.5)p eop
-%%Page: 15 17
-bop 0 -58 a Fk(Chapter)13 b(2:)k(BFD)c(front)g(end)p 413 -66
-669 3 v 691 w(DRAFT)p 1224 -66 V 695 w Fj(15)300 26 y Fg(\013)p
-325 26 1326 2 v 1325 w(\010)p 300 1021 2 972 v 362 112 a Fh(unsigned)23
-b(int)g(storage_needed;)362 162 y(asymbol)g(**symbol_table;)362
-212 y(unsigned)g(int)g(number_of_symbols;)362 262 y(unsigned)g(int)g(i;)362
-361 y(storage_needed)f(=)i(get_symtab_upper_bound)c(\(abfd\);)362
-461 y(if)j(\(storage_needed)f(==)i(0\))f({)433 511 y(return)g(;)362
-560 y(})362 610 y(symbol_table)f(=)i(\(asymbol)f(**\))g(malloc)g
-(\(storage_needed\);)410 660 y(...)362 710 y(number_of_symbols)e(=)433
-760 y(bfd_canonicalize_symtab)g(\(abfd,)i(symbol_table\);)362
-859 y(for)g(\(i)h(=)g(0;)f(i)h(<)g(number_of_symbols;)d(i++\))i({)433
-909 y(process_symbol)f(\(symbol_table[i]\);)362 959 y(})p 1677
-1021 V 300 1047 a Fg(\012)p 325 1047 1326 2 v 1325 w(\011)300
-1228 y Fm(All)16 b(storage)d(for)g(the)i(sym)o(b)q(ols)g(themselv)o(es)f(is)h
-(in)g(an)g(obstac)o(k)e(connected)j(to)300 1278 y(the)f(bfd,)g(and)h(is)g
-(freed)f(when)h(the)f(bfd)h(is)f(closed.)0 2030 y Fr(2.4.2)30
-b(W)-5 b(riting)20 b(Sym)n(b)r(ols)300 2190 y Fm(W)l(riting)13
-b(of)f(a)f(sym)o(b)q(ol)i(table)g(is)f(automatic)g(when)h(a)f(bfd)g(op)q(en)h
-(for)f(writing)g(is)300 2240 y(closed.)21 b(The)16 b(application)h(attatc)o
-(hes)d(a)h(v)o(ector)g(of)g(p)q(oin)o(ters)h(to)f(p)q(oin)o(ters)h(to)300
-2290 y(sym)o(b)q(ols)e(to)g(the)g(bfd)h(b)q(eing)g(written,)f(and)h(\014lls)g
-(in)h(the)e(sym)o(b)q(ol)g(coun)o(t.)20 b(The)300 2340 y(close)11
-b(and)f(clean)o(up)i(co)q(de)e(reads)g(through)g(the)g(table)h(pro)o(vided)g
-(and)f(p)q(erforms)300 2389 y(all)21 b(the)g(necessary)f(op)q(erations.)35
-b(The)21 b(outputing)f(co)q(de)h(m)o(ust)f(alw)o(a)o(ys)f(b)q(e)300
-2439 y(pro)o(vided)c(with)g(an)g('o)o(wned')e(sym)o(b)q(ol;)i(one)g(whic)o(h)
-g(has)f(come)h(from)e(another)300 2489 y(bfd,)i(or)g(one)g(whic)o(h)h(has)f
-(b)q(een)i(created)e(using)h Fh(bfd_make_empty_symbol)p Fm(.)300
-2620 y(An)j(example)h(sho)o(wing)f(the)g(creation)g(of)g(a)f(sym)o(b)q(ol)i
-(table)f(with)g(only)h(one)300 2670 y(elemen)o(t:)0 2770 y
-Fk(c)6 b(y)g(g)g(n)g(u)g(s)36 b(s)6 b(u)g(p)g(p)g(o)g(r)g(t)p
-332 2761 1396 3 v 1421 w(Revision:)17 b(1.5)p eop
-%%Page: 16 18
-bop 0 -58 a Fk(Chapter)13 b(2:)k(BFD)c(front)g(end)p 413 -66
-669 3 v 691 w(DRAFT)p 1224 -66 V 695 w Fj(16)300 26 y Fg(\013)p
-325 26 1326 2 v 1325 w(\010)p 300 1469 2 1420 v 314 112 a Fh(#include)23
-b("bfd.h")314 162 y(main\(\))314 212 y({)362 262 y(bfd)g(*abfd;)362
-311 y(asymbol)g(*ptrs[2];)362 361 y(asymbol)g(*new;)362 461
-y(abfd)g(=)h(bfd_openw\("foo","a.out-su)o(nos-big")o(\);)362
-511 y(bfd_set_format\(abfd,)d(bfd_object\);)362 560 y(new)i(=)h
-(bfd_make_empty_symbol\(abfd)o(\);)362 610 y(new->name)e(=)i("dummy_symbol";)
-362 660 y(new->section)e(=)i(\(asection)e(*\)0;)362 710 y(new->flags)g(=)i
-(BSF_ABSOLUTE)e(|)i(BSF_GLOBAL;)362 760 y(new->value)e(=)i(0x12345;)362
-859 y(ptrs[0])f(=)g(new;)362 909 y(ptrs[1])g(=)g(\(asymbol)g(*\)0;)362
-1009 y(bfd_set_symtab\(abfd,)e(ptrs,)i(1\);)362 1059 y(bfd_close\(abfd\);)314
-1108 y(})314 1208 y(./makesym)314 1258 y(nm)h(foo)314 1308
-y(00012345)f(A)h(dummy_symbol)p 1677 1469 V 300 1495 a Fg(\012)p
-325 1495 1326 2 v 1325 w(\011)300 1607 y Fm(Man)o(y)14 b(formats)g(cannot)h
-(represen)o(t)g(arbitary)f(sym)o(b)q(ol)i(information;)f(for)f(in-)300
-1657 y(stance)e(the)h Fh(a.out)f Fm(ob)s(ject)g(format)f(do)q(es)i(not)f
-(allo)o(w)h(an)f(arbitary)h(n)o(um)o(b)q(er)f(of)300 1707 y(sections.)20
-b(A)15 b(sym)o(b)q(ol)g(p)q(oin)o(ting)h(to)e(a)h(section)g(whic)o(h)g(is)h
-(not)e(one)h(of)f Fh(.text)p Fm(,)300 1757 y Fh(.data)g Fm(or)h
-Fh(.bss)g Fm(cannot)g(b)q(e)h(describ)q(ed.)0 1881 y Fr(2.4.3)30
-b(t)n(yp)r(edef)20 b(asym)n(b)r(ol)300 1973 y Fm(An)15 b Fh(asymbol)g
-Fm(has)g(the)g(form:)390 2022 y Fh(typedef)23 b(struct)g(symbol_cache_entry)
-390 2072 y({)300 2135 y Ff(A)d(p)q(oin)o(ter)g(to)e(the)i(bfd)g(whic)o(h)g(o)
-o(wns)f(the)h(sym)o(b)q(ol.)33 b(This)20 b(information)f(is)300
-2184 y(necessary)14 b(so)f(that)g(a)g(bac)o(k)g(end)h(can)g(w)o(ork)e(out)i
-(what)f(additional)h(\(in)o(visible)300 2234 y(to)j(the)e(application)i
-(writer\))e(information)g(is)h(carried)g(with)f(the)g(sym)o(b)q(ol.)438
-2284 y Fh(struct)23 b(_bfd)g(*the_bfd;)300 2346 y Ff(The)14
-b(text)g(of)f(the)h(sym)o(b)q(ol.)20 b(The)14 b(name)g(is)g(left)h(alone,)f
-(and)g(not)g(copied)h(-)f(the)300 2396 y(application)j(ma)o(y)d(not)h(alter)g
-(it.)462 2446 y Fh(CONST)23 b(char)g(*name;)300 2508 y Ff(The)15
-b(v)m(alue)i(of)e(the)g(sym)o(b)q(ol.)462 2558 y Fh(symvalue)22
-b(value;)300 2620 y Ff(A)o(ttributes)15 b(of)g(a)g(sym)o(b)q(ol:)390
-2670 y Fh(#define)23 b(BSF_NO_FLAGS)94 b(0x00)0 2770 y Fk(c)6
-b(y)g(g)g(n)g(u)g(s)36 b(s)6 b(u)g(p)g(p)g(o)g(r)g(t)p 332
-2761 1396 3 v 1421 w(Revision:)17 b(1.5)p eop
-%%Page: 17 19
-bop 0 -58 a Fk(Chapter)13 b(2:)k(BFD)c(front)g(end)p 413 -66
-669 3 v 691 w(DRAFT)p 1224 -66 V 695 w Fj(17)300 183 y Ff(The)18
-b(sym)o(b)q(ol)g(has)g(lo)q(cal)h(scop)q(e;)34 b Fh(static)17
-b Ff(in)34 b Fh(C)p Ff(.)27 b(The)18 b(v)m(alue)h(is)h(the)e(o\013set)300
-233 y(in)o(to)d(the)g(section)h(of)f(the)g(data.)390 283 y
-Fh(#define)23 b(BSF_LOCAL)g(0x01)300 349 y Ff(The)16 b(sym)o(b)q(ol)g(has)f
-(global)h(scop)q(e;)g(initialized)j(data)14 b(in)k Fh(C)p Ff(.)j(The)16
-b(v)m(alue)j(is)d(the)300 399 y(o\013set)e(in)o(to)h(the)h(section)f(of)g
-(the)g(data.)390 449 y Fh(#define)23 b(BSF_GLOBAL)f(0x02)300
-515 y Ff(Obsolete)390 565 y Fh(#define)h(BSF_IMPORT)f(0x04)300
-631 y Ff(The)13 b(sym)o(b)q(ol)g(has)f(global)h(scop)q(e,)g(and)g(is)g(exp)q
-(orted.)19 b(The)13 b(v)m(alue)g(is)g(the)g(o\013set)300 681
-y(in)o(to)i(the)g(section)h(of)f(the)g(data.)390 730 y Fh(#define)23
-b(BSF_EXPORT)f(0x08)300 797 y Ff(The)15 b(sym)o(b)q(ol)h(is)g(unde\014ned.)21
-b Fh(extern)15 b Ff(in)h Fh(C)p Ff(.)j(The)d(v)m(alue)g(has)f(no)h(meaning.)
-390 846 y Fh(#define)23 b(BSF_UNDEFINED)f(0x10)300 913 y Ff(The)17
-b(sym)o(b)q(ol)g(is)g(common,)f(initialized)k(to)c(zero;)g(default)h(in)26
-b Fh(C)p Ff(.)d(The)d(v)m(alue)300 962 y(is)c(the)f(size)h(of)f(the)g(ob)s
-(ject)g(in)h(b)o(ytes.)390 1012 y Fh(#define)23 b(BSF_FORT_COMM)f(0x20)300
-1078 y Ff(A)16 b(normal)21 b Fh(C)16 b Ff(sym)o(b)q(ol)g(w)o(ould)g(b)q(e)h
-(one)f(of:)27 b Fh(BSF_LOCAL)p Ff(,)19 b Fh(BSF_FORT_COMM)p
-Ff(,)300 1128 y Fh(BSF_UNDEFINED)13 b Ff(or)i Fh(BSF_EXPORT|BSD_GLOBAL)300
-1194 y Ff(The)g(sym)o(b)q(ol)f(is)h(a)f(debugging)i(record.)j(The)c(v)m(alue)
-g(has)g(an)f(arbitary)g(mean-)300 1244 y(ing.)390 1294 y Fh(#define)23
-b(BSF_DEBUGGING)f(0x40)300 1360 y Ff(The)d(sym)o(b)q(ol)g(has)g(no)g(section)
-g(attac)o(hed,)g(an)o(y)f(v)m(alue)i(is)g(the)f(actual)g(v)m(alue)300
-1410 y(and)e(is)f(not)f(a)g(relativ)o(e)g(o\013set)g(to)f(a)h(section.)390
-1460 y Fh(#define)23 b(BSF_ABSOLUTE)f(0x80)300 1526 y Ff(Used)16
-b(b)o(y)f(the)g(link)o(er)390 1576 y Fh(#define)23 b(BSF_KEEP)190
-b(0x10000)390 1625 y(#define)23 b(BSF_WARNING)118 b(0x20000)390
-1675 y(#define)23 b(BSF_KEEP_G)142 b(0x80000)300 1741 y Ff(Un)o(used)390
-1791 y Fh(#define)23 b(BSF_WEAK)190 b(0x100000)390 1841 y(#define)23
-b(BSF_CTOR)190 b(0x200000)390 1891 y(#define)23 b(BSF_FAKE)190
-b(0x400000)300 1957 y Ff(The)15 b(sym)o(b)q(ol)h(used)g(to)e(b)q(e)i(a)f
-(common)g(sym)o(b)q(ol,)g(but)g(no)o(w)g(it)h(is)f(allo)q(cated.)390
-2007 y Fh(#define)23 b(BSF_OLD_COMMON)46 b(0x800000)300 2073
-y Ff(The)15 b(default)h(v)m(alue)h(for)d(common)h(data.)390
-2123 y Fh(#define)23 b(BFD_FORT_COMM_DEFAULT_VAL)o(UE)e(0)300
-2189 y Ff(In)14 b(some)g(\014les)g(the)g(t)o(yp)q(e)g(of)f(a)h(sym)o(b)q(ol)g
-(sometimes)f(alters)h(its)g(lo)q(cation)g(in)h(an)300 2239
-y(output)i(\014le)h(-)f(ie)g(in)h(co\013)e(a)27 b Fh(ISFCN)16
-b Ff(sym)o(b)q(ol)h(whic)o(h)h(is)f(also)27 b Fh(C_EXT)17 b
-Ff(sym)o(b)q(ol)300 2289 y(app)q(ears)d(where)g(it)g(w)o(as)f(declared)i(and)
-e(not)h(at)f(the)h(end)g(of)f(a)h(section.)39 b(This)300 2338
-y(bit)16 b(is)f(set)g(b)o(y)h(the)f(target)f(bfd)h(part)g(to)f(con)o(v)o(ey)h
-(this)h(information.)390 2388 y Fh(#define)23 b(BSF_NOT_AT_END)93
-b(0x40000)300 2454 y Ff(Signal)16 b(that)f(the)g(sym)o(b)q(ol)h(is)f(the)h
-(lab)q(el)h(of)d(constructor)h(section.)390 2504 y Fh(#define)23
-b(BSF_CONSTRUCTOR)69 b(0x1000000)438 2554 y(flagword)22 b(flags;)300
-2620 y Ff(Aoin)o(ter)11 b(to)f(the)h(section)g(to)f(whic)o(h)i(this)f(sym)o
-(b)q(ol)g(is)h(relativ)o(e,)g(or)e(0)g(if)i(the)h(sym-)300
-2670 y(b)q(ol)j(is)f(absolute)g(or)f(unde\014ned.)22 b(Note)14
-b(that)h(it)g(is)g(not)f(su\016cien)o(t)i(to)e(set)i(this)0
-2770 y Fk(c)6 b(y)g(g)g(n)g(u)g(s)36 b(s)6 b(u)g(p)g(p)g(o)g(r)g(t)p
-332 2761 1396 3 v 1421 w(Revision:)17 b(1.5)p eop
-%%Page: 18 20
-bop 0 -58 a Fk(Chapter)13 b(2:)k(BFD)c(front)g(end)p 413 -66
-669 3 v 691 w(DRAFT)p 1224 -66 V 695 w Fj(18)300 183 y Ff(lo)q(cation)j(to)e
-(0)h(to)f(mark)g(a)h(sym)o(b)q(ol)g(as)g(absolute)g(-)g(the)g(\015ag)k
-Fh(BSF_ABSOLUTE)300 233 y Ff(m)o(ust)c(b)q(e)g(set)g(also.)438
-283 y Fh(struct)23 b(sec)g(*section;)300 351 y Ff(Bac)o(k)14
-b(end)h(sp)q(ecial)h(data.)j(This)14 b(is)h(b)q(eing)h(phased)e(out)g(in)h
-(fa)o(v)o(our)e(of)h(making)300 400 y(this)i(a)f(union.)438
-450 y Fh(PTR)23 b(udata;)390 500 y(})h(asymbol;)0 682 y Fr(2.4.4)30
-b(Sym)n(b)r(ol)21 b(Handling)f(F)-5 b(unctions)0 893 y(2.4.4.1)30
-b(get)p 292 893 19 3 v 21 w(sym)n(tab)p 506 893 V 23 w(upp)r(er)p
-686 893 V 22 w(b)r(ound)300 989 y Fm(Returns)22 b(the)g(n)o(um)o(b)q(er)f(of)
-g(b)o(ytes)h(required)g(in)g(a)g(v)o(ector)e(of)h(p)q(oin)o(ters)h(to)300
-1039 y Fh(asymbols)10 b Fm(for)g(all)i(the)f(sym)o(b)q(ols)h(in)f(the)h
-(supplied)h(bfd,)f(including)i(a)c(terminal)300 1089 y(NULL)k(p)q(oin)o(ter.)
-19 b(If)13 b(there)g(are)f(no)g(sym)o(b)q(ols)h(in)h(the)e(bfd,)i(then)f(0)f
-(is)h(returned.)300 1128 y Fg(\013)p 325 1128 1326 2 v 1325
-w(\010)p 300 1326 2 175 v 314 1214 a Fh(#define)23 b
-(get_symtab_upper_bound\(abf)o(d\))e(\\)433 1264 y(BFD_SEND)i(\(abfd,)g
-(_get_symtab_upper_bound,)e(\(abfd\)\))p 1677 1326 V 300 1352
-a Fg(\012)p 325 1352 1326 2 v 1325 w(\011)0 1583 y Fr(2.4.4.2)30
-b(bfd)p 296 1583 19 3 v 22 w(canonicalize)p 637 1583 V 22 w(sym)n(tab)300
-1680 y Fm(Supplied)20 b(a)d(bfd)h(and)f(a)g(p)q(oin)o(ter)h(to)f(an)g
-(uninitializ)q(ed)j(v)o(ector)d(of)g(p)q(oin)o(ters.)300 1730
-y(This)i(reads)f(in)h(the)f(sym)o(b)q(ols)g(from)g(the)g(bfd,)h(and)f
-(\014lls)i(in)f(the)f(table)h(with)300 1780 y(p)q(oin)o(ters)f(to)f(the)h
-(sym)o(b)q(ols,)g(and)g(a)f(trailing)i(NULL.)f(The)g(routine)g(returns)300
-1830 y(the)d(actual)h(n)o(um)o(b)q(er)f(of)g(sym)o(b)q(ol)h(p)q(oin)o(ters)f
-(not)g(including)j(the)d(NULL.)300 1868 y Fg(\013)p 325 1868
-1326 2 v 1325 w(\010)p 300 2166 2 274 v 314 1955 a Fh(#define)23
-b(bfd_canonicalize_symtab\(ab)o(fd,)e(location\))i(\\)433 2005
-y(BFD_SEND)g(\(abfd,)g(_bfd_canonicalize_symtab,\\)744 2054
-y(\(abfd,)g(location\)\))p 1677 2166 V 300 2192 a Fg(\012)p
-325 2192 1326 2 v 1325 w(\011)0 2424 y Fr(2.4.4.3)30 b(bfd)p
-296 2424 19 3 v 22 w(set)p 394 2424 V 22 w(sym)n(tab)300 2521
-y Fm(Pro)o(vided)14 b(a)f(table)h(of)f(p)q(oin)o(ters)h(to)f(to)g(sym)o(b)q
-(ols)g(and)h(a)f(coun)o(t,)h(writes)f(to)g(the)300 2570 y(output)i(bfd)h(the)
-f(sym)o(b)q(ols)g(when)h(closed.)390 2620 y Fh(PROTO\(boolean,)22
-b(bfd_set_symtab,)g(\(bfd)h(*,)h(asymbol)f(**,)390 2670 y(unsigned)g(int)g
-(\)\);)0 2770 y Fk(c)6 b(y)g(g)g(n)g(u)g(s)36 b(s)6 b(u)g(p)g(p)g(o)g(r)g(t)p
-332 2761 1396 3 v 1421 w(Revision:)17 b(1.5)p eop
-%%Page: 19 21
-bop 0 -58 a Fk(Chapter)13 b(2:)k(BFD)c(front)g(end)p 413 -66
-669 3 v 691 w(DRAFT)p 1224 -66 V 695 w Fj(19)0 183 y Fr(2.4.4.4)30
-b(bfd)p 296 183 19 3 v 22 w(prin)n(t)p 450 183 V 22 w(sym)n(b)r(ol)p
-661 183 V 23 w(v)m(andf)300 275 y Fm(Prin)o(ts)15 b(the)g(v)m(alue)i(and)e
-(\015ags)g(of)g(the)g(sym)o(b)q(ol)h(supplied)h(to)e(the)g(stream)f(\014le.)
-390 324 y Fh(PROTO\(void,)22 b(bfd_print_symbol_vandf,)f(\(PTR)i(file,)h
-(asym-)390 374 y(bol)f(*symbol\)\);)0 507 y Fr(2.4.4.5)30 b(bfd)p
-296 507 V 22 w(mak)n(e)p 457 507 V 22 w(empt)n(y)p 646 507
-V 23 w(sym)n(b)r(ol)300 598 y Fm(This)22 b(function)f(creates)g(a)g(new)56
-b Fh(asymbol)20 b Fm(structure)h(for)f(the)h(bfd,)i(and)300
-648 y(returns)15 b(a)g(p)q(oin)o(ter)h(to)e(it.)300 710 y(This)e(routine)g
-(is)g(necessary)l(,)g(since)h(eac)o(h)e(bac)o(k)g(end)h(has)g(priv)m(ate)g
-(information)300 760 y(surrounding)k(the)g Fh(asymbol)p Fm(.)j(Building)f(y)o
-(our)d(o)o(wn)g Fh(asymbol)f Fm(and)i(p)q(oin)o(ting)300 810
-y(to)d(it)h(will)h(not)e(create)h(the)f(priv)m(ate)i(information,)e(and)h
-(will)h(cause)f(problems)300 860 y(later)h(on.)300 890 y Fg(\013)p
-325 890 1326 2 v 1325 w(\010)p 300 1088 2 175 v 314 976 a Fh(#define)23
-b(bfd_make_empty_symbol\(abfd)o(\))e(\\)433 1026 y(BFD_SEND)i(\(abfd,)g
-(_bfd_make_empty_symbol,)e(\(abfd\)\))p 1677 1088 V 300 1114
-a Fg(\012)p 325 1114 1326 2 v 1325 w(\011)0 2770 y Fk(c)6 b(y)g(g)g(n)g(u)g
-(s)36 b(s)6 b(u)g(p)g(p)g(o)g(r)g(t)p 332 2761 1396 3 v 1421
-w(Revision:)17 b(1.5)p eop
-%%Page: 20 22
-bop 0 -58 a Fk(Chapter)13 b(2:)k(BFD)c(front)g(end)p 413 -66
-669 3 v 691 w(DRAFT)p 1224 -66 V 695 w Fj(20)0 183 y Fn(2.5)33
-b(Arc)n(hiv)n(es)300 275 y Fm(Gum)o(b)o(y)l(,)15 b(y)o(ou)f(promised)i(to)f
-(write)g(this)h(bit...)300 337 y(Arc)o(hiv)o(es)g(are)f(supp)q(orted)g(in)h
-(bfd)g(in)g Fh(archive.c)p Fm(.)300 399 y(An)22 b(arc)o(hiv)o(e)g(is)h
-(represen)o(ted)f(in)o(ternally)i(just)e(lik)o(e)h(another)e(bfd,)j(with)e(a)
-300 449 y(p)q(oin)o(ter)f(to)f(a)g(c)o(hain)i(of)e(con)o(tained)h(bfds.)36
-b(Arc)o(hiv)o(es)21 b(can)g(b)q(e)g(created)g(b)o(y)300 499
-y(op)q(ening)15 b(bfds,)f(linking)i(them)d(together)g(and)h(attatc)o(hing)f
-(them)h(as)f(c)o(hildren)300 549 y(to)i(another)f(bfd)i(and)f(then)h(closing)
-g(the)f(paren)o(t)g(bfd.)0 681 y Fr(2.5.0.1)30 b(bfd)p 296
-681 19 3 v 22 w(get)p 401 681 V 21 w(next)p 540 681 V 23 w(map)r(en)n(t)300
-773 y Fm(What)15 b(this)g(do)q(es)390 823 y Fh(PROTO\(symindex,)22
-b(bfd_get_next_mapent,)f(\(bfd)i(*,)h(symin-)390 872 y(dex,)f(carsym)g
-(**\)\);)0 1005 y Fr(2.5.0.2)30 b(bfd)p 296 1005 V 22 w(set)p
-394 1005 V 22 w(arc)n(hiv)n(e)p 605 1005 V 23 w(head)300 1096
-y Fm(Used)18 b(whilst)g(pro)q(cessing)g(arc)o(hiv)o(es.)26
-b(Sets)17 b(the)g(head)h(of)f(the)g(c)o(hain)h(of)f(bfds)300
-1146 y(con)o(tained)f(in)g(an)f(arc)o(hiv)o(e)g(to)g Ff(new)p
-914 1146 14 2 v 17 w(head)p Fm(.)20 b(\(see)15 b(c)o(hapter)g(on)g(arc)o(hiv)
-o(es\))390 1196 y Fh(PROTO\(boolean,)22 b(bfd_set_archive_head,)f(\(bfd)i
-(*output,)390 1246 y(bfd)g(*new_head\)\);)0 1379 y Fr(2.5.0.3)30
-b(bfd)p 296 1379 19 3 v 22 w(get)p 401 1379 V 21 w(elt)p 491
-1379 V 22 w(at)p 567 1379 V 22 w(index)390 1458 y Fh(PROTO\(bfd)23
-b(*,)g(bfd_get_elt_at_index,)e(\(bfd)j(*,)f(int\)\);)0 1590
-y Fr(2.5.0.4)30 b(bfd)p 296 1590 V 22 w(op)r(enr)p 472 1590
-V 21 w(next)p 611 1590 V 23 w(arc)n(hiv)n(ed)p 857 1590 V 23
-w(\014le)300 1682 y Fm(Initially)14 b(pro)o(vided)f(a)f(bfd)g(con)o(taining)g
-(an)g(arc)o(hiv)o(e)g(and)g(NULL,)h(op)q(ens)f(a)g(bfd)300
-1732 y(on)j(the)g(\014rst)f(con)o(tained)i(elemen)o(t)g(and)f(returns)g
-(that.)k(Subsequen)o(t)d(calls)g(to)300 1781 y(bfd)p 367 1781
-14 2 v 17 w(op)q(enr)p 496 1781 V 17 w(next)p 600 1781 V 16
-w(arc)o(hiv)o(ed)p 781 1781 V 17 w(\014le)c(should)h(pass)e(the)g(arc)o(hiv)o
-(e)g(and)h(the)f(previous)300 1831 y(return)16 b(v)m(alue)i(to)e(return)h(a)f
-(created)g(bfd)h(to)f(the)h(next)f(con)o(tained)i(elemen)o(t.)300
-1881 y(NULL)e(is)g(returned)f(when)h(there)f(are)g(no)g(more.)390
-1931 y Fh(PROTO\(bfd*,)22 b(bfd_openr_next_archived_file,)748
-1981 y(\(bfd)h(*archive,)g(bfd)g(*previous\)\);)0 2770 y Fk(c)6
-b(y)g(g)g(n)g(u)g(s)36 b(s)6 b(u)g(p)g(p)g(o)g(r)g(t)p 332
-2761 1396 3 v 1421 w(Revision:)17 b(1.5)p eop
-%%Page: 21 23
-bop 0 -58 a Fk(Chapter)13 b(2:)k(BFD)c(front)g(end)p 413 -66
-669 3 v 691 w(DRAFT)p 1224 -66 V 695 w Fj(21)0 183 y Fn(2.6)33
-b(File)23 b(F)-6 b(ormats)300 275 y Fm(A)17 b(format)g(is)h(a)30
-b Fh(bfd)17 b Fm(concept)h(of)f(high)h(lev)o(el)h(\014le)g(con)o(ten)o(ts.)26
-b(The)17 b(formats)300 324 y(supp)q(orted)f(b)o(y)f Fh(bfd)g
-Fm(are:)300 387 y Fh(bfd_object)450 437 y Fm(The)k(bfd)g(ma)o(y)f(con)o(tain)
-h(data,)f(sym)o(b)q(ols,)i(relo)q(cations)f(and)g(debug)450
-486 y(info.)300 547 y Fh(bfd_archive)450 596 y Fm(The)c(bfd)h(con)o(tains)f
-(other)g(bfds)h(and)f(an)g(optional)h(index.)300 657 y Fh(bfd_core)450
-707 y Fm(The)f(bfd)h(con)o(tains)f(the)h(result)f(of)g(an)g(executable)i
-(core)e(dump.)0 832 y Fr(2.6.0.1)30 b(bfd)p 296 832 19 3 v
-22 w(c)n(hec)n(k)p 462 832 V 23 w(format)300 923 y Fm(This)19
-b(routine)g(is)g(supplied)i(a)d(bfd)h(and)g(a)f(format.)29
-b(It)18 b(attempts)g(to)g(v)o(erify)300 973 y(if)e(the)g(\014le)g(attatc)o
-(hed)f(to)g(the)g(bfd)h(is)g(indeed)h(compatible)g(with)f(the)f(format)300
-1023 y(sp)q(eci\014ed)i(\(ie,)f(one)f(of)g Fh(bfd_object)p
-Fm(,)e Fh(bfd_archive)h Fm(or)g Fh(bfd_core)p Fm(\).)300 1085
-y(If)j(the)h(bfd)f(has)g(b)q(een)h(set)f(to)g(a)f(sp)q(eci\014c)j
-Ff(target)e Fm(b)q(efore)h(the)f(call,)h(only)g(the)300 1135
-y(named)d(target)f(and)i(format)e(com)o(bination)h(will)i(b)q(e)f(c)o(hec)o
-(k)o(ed.)k(If)c(the)f(target)300 1184 y(has)k(not)f(b)q(een)i(set,)f(or)g
-(has)f(b)q(een)i(set)f(to)40 b Fh(default)18 b Fm(then)h(all)h(the)f(kno)o
-(wn)300 1234 y(target)14 b(bac)o(k)o(ends)h(will)i(b)q(e)f(in)o(terrogated)f
-(to)f(determine)i(a)f(matc)o(h.)300 1297 y(The)h(function)h(returns)22
-b Fh(true)15 b Fm(on)h(success,)h(otherwise)k Fh(false)16 b
-Fm(with)g(one)g(of)300 1346 y(the)f(follo)o(wing)h(error)f(co)q(des:)450
-1409 y(in)o(v)m(alid)p 582 1409 14 2 v 19 w(op)q(eration)21
-b(if)58 b Fh(format)20 b Fm(is)h(not)g(one)h(of)56 b Fh(bfd_object)p
-Fm(,)450 1458 y Fh(bfd_archive)14 b Fm(or)g Fh(bfd_core)p Fm(.)300
-1519 y Fh(system_call_error)450 1569 y Fm(if)g(an)g(error)f(o)q(ccured)h
-(during)g(a)g(read)f(-)h(ev)o(en)g(some)f(\014le)i(mismatc)o(hes)450
-1618 y(can)g(cause)h(system)p 794 1618 V 16 w(call)p 877 1618
-V 17 w(errros)300 1679 y Fh(file_not_recognised)450 1729 y
-Fm(none)g(of)e(the)i(bac)o(k)o(ends)f(recognised)h(the)f(\014le)i(format)300
-1789 y Fh(file_ambiguously_recognize)o(d)450 1839 y Fm(more)e(than)g(one)g
-(bac)o(k)o(end)h(recognised)g(the)f(\014le)h(format.)390 1889
-y Fh(PROTO\(boolean,)22 b(bfd_check_format,)f(\(bfd)j(*abfd,)f(bfd_format)p
-2002 1895 21 38 v 390 1938 a(format\)\);)0 2063 y Fr(2.6.0.2)30
-b(bfd)p 296 2063 19 3 v 22 w(set)p 394 2063 V 22 w(format)300
-2155 y Fm(This)18 b(function)g(sets)f(the)g(\014le)h(format)e(of)h(the)g
-(supplied)j(bfd)d(to)g(the)g(format)300 2205 y(requested.)26
-b(If)17 b(the)h(target)d(set)i(in)h(the)f(bfd)h(do)q(es)f(not)g(supp)q(ort)g
-(the)g(format)300 2254 y(requested,)c(the)f(format)f(is)i(illegal)i(or)d(the)
-g(bfd)h(is)g(not)f(op)q(en)h(for)e(writing)i(than)300 2304
-y(an)i(error)g(o)q(ccurs.)390 2354 y Fh(PROTO\(boolean,bfd_set_form)o
-(at,\(bfd)20 b(*,)k(bfd_format\)\);)0 2479 y Fr(2.6.0.3)30
-b(bfd)p 296 2479 V 22 w(format)p 498 2479 V 21 w(string)300
-2570 y Fm(This)12 b(function)f(tak)o(es)f(one)h(argumen)o(t,)g(and)g(en)o
-(umerated)g(t)o(yp)q(e)g(\(bfd)p 1486 2570 14 2 v 17 w(format\))300
-2620 y(and)h(returns)f(a)g(p)q(oin)o(ter)h(to)e(a)h(const)g(string)h
-Fh(")p Fm(in)o(v)m(alid)p Fh(")p Fm(,)h Fh(")p Fm(ob)s(ject)p
-Fh(")p Fm(,)e Fh(")p Fm(arc)o(hiv)o(e)p Fh(")p Fm(,)300 2670
-y Fh(")p Fm(core)p Fh(")j Fm(or)f Fh(")p Fm(unkno)o(wn)p Fh(")h
-Fm(dep)q(ending)j(up)q(on)e(the)f(v)m(alue)h(of)f(the)g(en)o(umeration.)0
-2770 y Fk(c)6 b(y)g(g)g(n)g(u)g(s)36 b(s)6 b(u)g(p)g(p)g(o)g(r)g(t)p
-332 2761 1396 3 v 1421 w(Revision:)17 b(1.5)p eop
-%%Page: 22 24
-bop 0 -58 a Fk(Chapter)13 b(2:)k(BFD)c(front)g(end)p 413 -66
-669 3 v 691 w(DRAFT)p 1224 -66 V 695 w Fj(22)390 183 y Fh(PROTO\(CONST)22
-b(char)i(*,)f(bfd_format_string,)f(\(bfd_format\)\);)0 2770
-y Fk(c)6 b(y)g(g)g(n)g(u)g(s)36 b(s)6 b(u)g(p)g(p)g(o)g(r)g(t)p
-332 2761 1396 3 v 1421 w(Revision:)17 b(1.5)p eop
-%%Page: 23 25
-bop 0 -58 a Fk(Chapter)13 b(2:)k(BFD)c(front)g(end)p 413 -66
-669 3 v 691 w(DRAFT)p 1224 -66 V 695 w Fj(23)0 183 y Fn(2.7)33
-b(Relo)r(cations)300 275 y Fm(Bfd)23 b(main)o(tains)h(relo)q(cations)f(in)h
-(m)o(uc)o(h)f(the)g(same)g(w)o(as)f(as)g(it)i(main)o(tains)300
-324 y(sym)o(b)q(ols;)i(they)c(are)g(left)g(alone)h(un)o(til)g(required,)h
-(then)f(read)f(in)h(en-mass)300 374 y(and)e(traslated)f(in)o(to)g(an)h(in)o
-(ternal)g(form.)36 b(There)20 b(is)h(a)g(common)f(routine)300
-424 y Fh(bfd_perform_relocation)11 b Fm(whic)o(h)k(acts)e(up)q(on)i(the)f
-(canonical)h(form)e(to)h(to)300 474 y(the)h(actual)h(\014xup.)300
-536 y(Note)h(that)g(relo)q(cations)i(are)e(main)o(tained)h(on)g(a)f(p)q(er)i
-(section)f(basis,)g(whilst)300 586 y(sym)o(b)q(ols)d(are)g(main)o(tained)h
-(on)g(a)e(p)q(er)i(bfd)g(basis.)300 648 y(All)g(a)e(bac)o(k)h(end)g(has)f(to)
-g(do)h(to)f(\014t)g(the)h(bfd)g(in)o(terface)g(is)g(to)f(create)g(as)g(man)o
-(y)300 698 y Fh(struct)g(reloc_cache_entry)i Fm(as)i(there)g(are)g(relo)q
-(cations)h(in)g(a)f(particuar)300 748 y(section,)d(and)h(\014ll)g(in)g(the)g
-(righ)o(t)f(bits:)0 873 y Fr(2.7.0.1)30 b(bfd)p 296 873 19
-3 v 22 w(p)r(erform)p 533 873 V 21 w(relo)r(cation)300 964
-y Fm(The)15 b(relo)q(cation)h(routine)g(returns)f(as)g(a)g(status)f(an)h(en)o
-(umerated)h(t)o(yp)q(e:)390 1014 y Fh(typedef)23 b(enum)g(bfd_reloc_status)f
-({)300 1076 y Ff(No)15 b(errors)f(detected)438 1126 y Fh(bfd_reloc_ok,)300
-1188 y Ff(The)h(relo)q(cation)h(w)o(as)f(p)q(erformed,)g(but)g(there)g(w)o
-(as)g(an)g(o)o(v)o(er\015o)o(w.)438 1238 y Fh(bfd_reloc_overflow,)300
-1300 y Ff(The)g(address)h(to)e(relo)q(cate)i(w)o(as)e(not)h(within)h(the)g
-(section)f(supplied)438 1350 y Fh(bfd_reloc_outofrange,)300
-1412 y Ff(Used)h(b)o(y)f(sp)q(ecial)i(functions)438 1462 y
-Fh(bfd_reloc_continue,)300 1524 y Ff(Un)o(used)438 1574 y Fh
-(bfd_reloc_notsupported,)300 1636 y Ff(Unsupp)q(orted)f(relo)q(cation)g(size)
-g(requested.)438 1686 y Fh(bfd_reloc_other,)300 1748 y Ff(The)f(sym)o(b)q(ol)
-h(to)f(relo)q(cate)g(against)g(w)o(as)f(unde\014ned.)438 1798
-y Fh(bfd_reloc_undefined,)300 1861 y Ff(The)j(relo)q(caction)g(w)o(as)e(p)q
-(erformed,)i(but)g(ma)o(y)e(not)h(b)q(e)h(ok)f(-)h(presen)o(tly)g(gen-)300
-1910 y(erated)g(only)f(when)f(linking)i(i960)e(co\013)g(\014les)h(with)g
-(i960)f(b.out)f(sym)o(b)q(ols.)438 1960 y Fh(bfd_reloc_dangerous)462
-2010 y(})414 2060 y(bfd_reloc_status_enum_typ)o(e;)390 2110
-y(typedef)23 b(struct)g(reloc_cache_entry)390 2159 y({)300
-2222 y Ff(A)15 b(p)q(oin)o(ter)h(in)o(to)f(the)g(canonical)i(table)f(of)e(p)q
-(oin)o(ters)438 2271 y Fh(struct)23 b(symbol_cache_entry)e(**sym_ptr_ptr;)300
-2334 y Ff(o\013set)14 b(in)i(section)438 2384 y Fh(rawdata_offset)22
-b(address;)300 2446 y Ff(addend)16 b(for)f(relo)q(cation)h(v)m(alue)438
-2496 y Fh(bfd_vma)23 b(addend;)300 2558 y Ff(if)16 b(sym)f(is)g(n)o(ull)i
-(this)f(is)f(the)h(section)438 2608 y Fh(struct)23 b(sec)g(*section;)300
-2670 y Ff(P)o(oin)o(ter)15 b(to)f(ho)o(w)h(to)g(p)q(erform)g(the)g(required)h
-(relo)q(cation)0 2770 y Fk(c)6 b(y)g(g)g(n)g(u)g(s)36 b(s)6
-b(u)g(p)g(p)g(o)g(r)g(t)p 332 2761 1396 3 v 1421 w(Revision:)17
-b(1.5)p eop
-%%Page: 24 26
-bop 0 -58 a Fk(Chapter)13 b(2:)k(BFD)c(front)g(end)p 413 -66
-669 3 v 691 w(DRAFT)p 1224 -66 V 695 w Fj(24)438 183 y Fh(CONST)23
-b(struct)g(reloc_howto_struct)e(*howto;)390 233 y(})j(arelent;)300
-326 y(sym_ptr_ptr)450 376 y Fm(The)e(sym)o(b)q(ol)g(table)g(p)q(oin)o(ter)g
-(p)q(oin)o(ts)h(to)e(a)g(p)q(oin)o(ter)h(to)f(the)h(sym-)450
-426 y(b)q(ol)15 b(asco)q(ciated)g(with)f(the)h(relo)q(cation)g(request.)k
-(This)c(w)o(ould)g(natu-)450 476 y(raly)g(b)q(e)g(the)g(p)q(oin)o(ter)g(in)o
-(to)f(the)h(table)g(returned)g(b)o(y)g(the)f(bac)o(k)h(end's)450
-526 y(get)p 514 526 14 2 v 16 w(sym)o(tab)h(action.)23 b(See)17
-b(Section)h(2.4)d([Sym)o(b)q(ols],)h(page)h(14.)23 b(The)450
-575 y(sym)o(b)q(ol)18 b(is)h(referenced)f(through)g(a)g(p)q(oin)o(ter)g(to)f
-(a)h(p)q(oin)o(ter)g(so)g(that)450 625 y(to)q(ols)j(lik)o(e)g(the)g(link)o
-(er)h(can)f(\014xup)g(all)h(the)e(sym)o(b)q(ols)h(of)g(the)f(same)450
-675 y(name)h(b)o(y)g(mo)q(difying)i(only)e(one)h(p)q(oin)o(ter.)38
-b(The)21 b(relo)q(cation)h(rou-)450 725 y(tine)16 b(lo)q(oks)f(in)g(the)g
-(sym)o(b)q(ol)h(and)f(uses)g(the)g(base)g(of)f(the)h(section)h(the)450
-775 y(sym)o(b)q(ol)k(is)h(attatc)o(hed)e(to)g(and)h(the)g(v)m(alue)h(of)e
-(the)h(sym)o(b)q(ol)g(as)g(the)450 825 y(initial)h(relo)q(cation)f(o\013set.)
-29 b(If)20 b(the)e(sym)o(b)q(ol)i(p)q(oin)o(ter)f(is)g(zero,)h(then)450
-874 y(the)15 b(section)h(pro)o(vided)g(is)g(lo)q(ok)o(ed)f(up.)300
-968 y Fh(address)450 1017 y Fm(The)d(address)g(\014eld)i(giv)o(es)e(the)g
-(o\013set)f(in)i(b)o(ytes)f(from)f(the)h(base)g(of)g(the)450
-1067 y(section)g(data)e(whic)o(h)i(o)o(wns)f(the)g(relo)q(cation)h(record)f
-(to)g(the)g(\014rst)g(b)o(yte)450 1117 y(of)j(relo)q(catable)h(information.)k
-(The)14 b(actual)h(data)e(relo)q(cated)i(will)g(b)q(e)450 1167
-y(relativ)o(e)j(to)e(this)h(p)q(oin)o(t)h(-)f(for)g(example,)g(a)g(relo)q
-(cation)h(t)o(yp)q(e)f(whic)o(h)450 1217 y(mo)q(di\014es)e(the)e(b)q(ottom)g
-(t)o(w)o(o)f(b)o(ytes)i(of)f(a)g(four)g(b)o(yte)h(w)o(ord)e(w)o(ould)i(not)
-450 1267 y(touc)o(h)h(the)g(\014rst)g(b)o(yte)g(p)q(oin)o(ted)h(to)f(in)h(a)f
-(big)g(endian)i(w)o(orld.)300 1360 y Fh(addend)450 1410 y Fm(The)e(addend)g
-(is)g(a)f(v)m(alue)h(pro)o(vided)h(b)o(y)e(the)g(bac)o(k)h(end)g(to)e(b)q(e)i
-(added)450 1459 y(\(!\))27 b(to)17 b(the)g(relo)q(cation)i(o\013set.)26
-b(It's)17 b(in)o(terpretation)h(is)g(dep)q(enden)o(t)450 1509
-y(up)q(on)e(the)f(ho)o(wto.)k(F)l(or)c(example,)g(on)g(the)h(68k)e(the)h(co)q
-(de:)450 1548 y Fg(\013)p 475 1548 1176 2 v 1175 w(\010)p 450
-1896 2 324 v 655 1634 a Fh(char)23 b(foo[];)655 1684 y(main\(\))846
-1734 y({)846 1784 y(return)g(foo[0x12345678];)846 1834 y(})p
-1677 1896 V 450 1922 a Fg(\012)p 475 1922 1176 2 v 1175 w(\011)450
-2065 y Fm(Could)16 b(b)q(e)g(compiled)h(in)o(to:)450 2103 y
-Fg(\013)p 475 2103 V 1175 w(\010)p 450 2451 2 324 v 655 2190
-a Fh(linkw)23 b(fp,#-4)655 2240 y(moveb)g(@#12345678,d0)655
-2289 y(extbl)g(d0)655 2339 y(unlk)g(fp)655 2389 y(rts)p 1677
-2451 V 450 2477 a Fg(\012)p 475 2477 1176 2 v 1175 w(\011)450
-2620 y Fm(This)15 b(could)g(create)f(a)g(relo)q(c)i(p)q(oin)o(ting)f(to)f(fo)
-q(o,)f(but)i(lea)o(v)o(e)g(the)f(o\013set)450 2670 y(in)i(the)f(data)g
-(\(something)g(lik)o(e\))0 2770 y Fk(c)6 b(y)g(g)g(n)g(u)g(s)36
-b(s)6 b(u)g(p)g(p)g(o)g(r)g(t)p 332 2761 1396 3 v 1421 w(Revision:)17
-b(1.5)p eop
-%%Page: 25 27
-bop 0 -58 a Fk(Chapter)13 b(2:)k(BFD)c(front)g(end)p 413 -66
-669 3 v 691 w(DRAFT)p 1224 -66 V 695 w Fj(25)450 26 y Fg(\013)p
-475 26 1176 2 v 1175 w(\010)p 450 573 2 524 v 464 112 a Fh(RELOCATION)23
-b(RECORDS)g(FOR)g([.text]:)464 162 y(OFFSET)71 b(TYPE)143 b(VALUE)464
-212 y(00000006)23 b(32)191 b(_foo)464 311 y(00000000)23 b(4e56)g(fffc)238
-b(;)24 b(linkw)f(fp,#-4)464 361 y(00000004)g(1039)g(1234)h(5678)118
-b(;)24 b(moveb)f(@#12345678,d0)464 411 y(0000000a)g(49c0)357
-b(;)24 b(extbl)f(d0)464 461 y(0000000c)g(4e5e)357 b(;)24 b(unlk)f(fp)464
-511 y(0000000e)g(4e75)357 b(;)24 b(rts)p 1677 573 V 450 599
-a Fg(\012)p 475 599 1176 2 v 1175 w(\011)450 751 y Fm(Using)17
-b(co\013)f(and)h(an)f(88k,)g(some)g(instructions)i(don't)d(ha)o(v)o(e)i
-(enough)450 800 y(space)11 b(in)g(them)f(to)g(represen)o(t)h(the)f(full)i
-(address)e(range,)h(and)g(p)q(oin)o(ters)450 850 y(ha)o(v)o(e)k(to)f(b)q(e)i
-(loaded)g(in)g(t)o(w)o(o)e(parts.)19 b(So)c(y)o(ou'd)g(get)g(something)g(lik)
-o(e:)450 889 y Fg(\013)p 475 889 V 1175 w(\010)p 450 1137 2
-225 v 655 975 a Fh(or.u)119 b(r13,r0,hi16\(_foo+0x123456)o(78\))655
-1025 y(ld.b)g(r2,r13,lo16\(_foo+0x123456)o(78\))655 1075 y(jmp)143
-b(r1)p 1677 1137 V 450 1163 a Fg(\012)p 475 1163 1176 2 v 1175
-w(\011)450 1315 y Fm(This)11 b(whould)g(create)f(t)o(w)o(o)f(relo)q(cs,)j(b)q
-(oth)e(p)q(oin)o(ting)i(to)p 1380 1315 14 2 v 26 w(fo)q(o,)e(and)h(with)450
-1365 y(0x12340000)h(in)j(their)f(addend)h(\014eld.)21 b(The)14
-b(data)g(w)o(ould)g(consist)h(of:)450 1395 y Fg(\013)p 475
-1395 1176 2 v 1175 w(\010)p 450 1942 2 524 v 464 1531 a Fh(RELOCATION)23
-b(RECORDS)g(FOR)g([.text]:)464 1581 y(OFFSET)71 b(TYPE)143
-b(VALUE)464 1630 y(00000002)23 b(HVRT16)95 b(_foo+0x12340000)464
-1680 y(00000006)23 b(LVRT16)95 b(_foo+0x12340000)464 1780 y(00000000)23
-b(5da05678)261 b(;)24 b(or.u)f(r13,r0,0x5678)464 1830 y(00000004)g(1c4d5678)
-261 b(;)24 b(ld.b)f(r2,r13,0x5678)464 1879 y(00000008)g(f400c001)261
-b(;)24 b(jmp)f(r1)p 1677 1942 V 450 1967 a Fg(\012)p 475 1967
-1176 2 v 1175 w(\011)450 2119 y Fm(The)13 b(relo)q(cation)g(routine)h(digs)f
-(out)f(the)h(v)m(alue)h(from)e(the)h(data,)f(adds)450 2169
-y(it)k(to)f(the)h(addend)g(to)g(get)f(the)h(original)g(o\013set)f(and)h(then)
-g(adds)g(the)450 2219 y(v)m(alue)j(of)p 627 2219 14 2 v 34
-w(fo)q(o.)28 b(Note)17 b(that)g(all)i(32)f(bits)g(ha)o(v)o(e)f(to)h(b)q(e)g
-(k)o(ept)g(around)450 2269 y(somewhere,)d(to)f(cop)q(e)i(with)g(carry)e(from)
-h(bit)h(15)e(to)h(bit)g(16.)450 2371 y(On)j(further)f(example)h(is)f(the)h
-(sparc)f(and)g(the)g(a.out)f(format.)25 b(The)450 2421 y(sparc)14
-b(has)g(a)f(similar)j(problem)e(to)g(the)g(88k,)f(in)i(that)e(some)h
-(instruc-)450 2471 y(tions)k(don't)f(ha)o(v)o(e)g(ro)q(om)g(for)f(an)i(en)o
-(tire)g(o\013set,)e(but)i(on)g(the)f(sparc)450 2521 y(the)f(parts)g(are)g
-(created)h(o)q(dd)f(sized)i(lumps.)24 b(The)17 b(designers)g(of)f(the)450
-2570 y(a.out)e(format)f(c)o(hose)h(not)h(to)e(use)i(the)g(data)f(within)i
-(the)e(section)i(for)450 2620 y(storing)11 b(part)f(of)h(the)g(o\013set;)g
-(all)h(the)f(o\013set)f(is)h(k)o(ept)g(within)h(the)g(relo)q(c.)450
-2670 y(An)o(y)j(thing)h(in)g(the)f(data)g(should)h(b)q(e)g(ignored.)0
-2770 y Fk(c)6 b(y)g(g)g(n)g(u)g(s)36 b(s)6 b(u)g(p)g(p)g(o)g(r)g(t)p
-332 2761 1396 3 v 1421 w(Revision:)17 b(1.5)p eop
-%%Page: 26 28
-bop 0 -58 a Fk(Chapter)13 b(2:)k(BFD)c(front)g(end)p 413 -66
-669 3 v 691 w(DRAFT)p 1224 -66 V 695 w Fj(26)450 26 y Fg(\013)p
-475 26 1176 2 v 1175 w(\010)p 450 374 2 324 v 655 112 a Fh(save)23
-b(\045sp,-112,\045sp)655 162 y(sethi)g(\045hi\(_foo+0x12345678\),\045g2)655
-212 y(ldsb)g([\045g2+\045lo\(_foo+0x12345678\)],\045i)o(0)655
-262 y(ret)655 311 y(restore)p 1677 374 V 450 399 a Fg(\012)p
-475 399 1176 2 v 1175 w(\011)450 510 y Fm(Both)17 b(relo)q(cs)h(con)o(tains)f
-(a)g(p)q(oin)o(ter)h(to)e(fo)q(o,)h(and)g(the)g(o\013sets)g(w)o(ould)450
-560 y(con)o(tain)e(junk.)450 599 y Fg(\013)p 475 599 V 1175
-w(\010)p 450 1196 2 573 v 464 685 a Fh(RELOCATION)23 b(RECORDS)g(FOR)g
-([.text]:)464 735 y(OFFSET)71 b(TYPE)143 b(VALUE)464 785 y(00000004)23
-b(HI22)143 b(_foo+0x12345678)464 835 y(00000008)23 b(LO10)143
-b(_foo+0x12345678)464 934 y(00000000)23 b(9de3bf90)118 b(;)24
-b(save)f(\045sp,-112,\045sp)464 984 y(00000004)g(05000000)118
-b(;)24 b(sethi)f(\045hi\(_foo+0\),\045g2)464 1034 y(00000008)g(f048a000)118
-b(;)24 b(ldsb)f([\045g2+\045lo\(_foo+0\)],\045i0)464 1084 y(0000000c)g
-(81c7e008)118 b(;)24 b(ret)464 1133 y(00000010)f(81e80000)118
-b(;)24 b(restore)p 1677 1196 V 450 1221 a Fg(\012)p 475 1221
-1176 2 v 1175 w(\011)300 1332 y Fh(section)450 1382 y Fm(The)17
-b(section)g(\014eld)h(is)f(only)g(used)h(when)f(the)g(sym)o(b)q(ol)g(p)q(oin)
-o(ter)g(\014eld)450 1432 y(is)f(n)o(ull.)21 b(It)15 b(supplies)j(the)d
-(section)h(in)o(to)f(whic)o(h)h(the)f(data)g(should)h(b)q(e)450
-1482 y(relo)q(cated.)k(The)14 b(\014eld's)h(main)g(use)f(comes)g(from)f
-(assem)o(blers)h(whic)o(h)450 1532 y(do)j(most)e(of)i(the)f(sym)o(b)q(ol)h
-(\014xups)h(themselv)o(es;)f(an)g(assem)o(bler)g(ma)o(y)450
-1581 y(tak)o(e)12 b(an)g(in)o(ternal)h(reference)h(to)d(a)i(lab)q(el,)h(but)e
-(since)i(it)f(kno)o(ws)f(where)450 1631 y(the)18 b(lab)q(el)j(is,)e(it)f(can)
-h(turn)f(the)h(relo)q(cation)g(request)f(from)g(a)g(sym-)450
-1681 y(b)q(ol)g(lo)q(okup)f(in)o(to)g(a)g(section)g(relativ)o(e)h(relo)q
-(cation)f(-)g(the)g(relo)q(cation)450 1731 y(emitted)f(has)f(no)g(sym)o(b)q
-(ol,)g(just)g(a)g(section)h(to)e(relo)q(cate)i(against.)450
-1792 y(I'm)h(not)f(sure)h(what)g(it)g(means)g(when)g(b)q(oth)g(a)f(sym)o(b)q
-(ol)i(p)q(oin)o(ter)f(an)450 1842 y(a)g(section)g(p)q(oin)o(ter)g(are)g
-(presen)o(t.)25 b(Some)17 b(formats)e(use)i(this)g(sort)f(of)450
-1891 y(mec)o(hanism)e(to)e(describ)q(e)j(PIC)f(relo)q(cations,)g(but)f(bfd)g
-(can't)g(to)g(that)450 1941 y(sort)h(of)h(thing)h(y)o(et.)300
-2002 y Fh(howto)30 b Fm(The)16 b(ho)o(wto)e(\014eld)i(can)g(b)q(e)g(imagined)
-g(as)f(a)g(relo)q(cation)h(instruction.)450 2052 y(It)c(is)h(a)f(p)q(oin)o
-(ter)h(to)f(a)g(struct)g(whic)o(h)h(con)o(tains)g(information)f(on)h(what)450
-2102 y(to)j(do)h(with)g(all)h(the)f(other)f(information)h(in)h(the)e(relo)q
-(c)i(record)f(and)450 2152 y(data)g(section.)27 b(A)17 b(bac)o(k)g(end)h(w)o
-(ould)g(normally)g(ha)o(v)o(e)f(a)g(relo)q(cation)450 2202
-y(instruction)g(set)e(and)h(turn)f(relo)q(cations)i(in)o(to)e(p)q(oin)o(ters)
-h(to)f(the)h(cor-)450 2251 y(rect)i(structure)g(on)g(input)h(-)f(but)g(it)g
-(w)o(ould)g(b)q(e)h(p)q(ossible)h(to)d(create)450 2301 y(eac)o(h)e(ho)o(wto)f
-(\014eld)j(on)e(demand.)0 2429 y Fr(2.7.0.2)30 b(relo)r(c)p
-339 2429 19 3 v 21 w(ho)n(wto)p 522 2429 V 22 w(t)n(yp)r(e)300
-2521 y Fm(The)d Fh(reloc_howto_type)14 b Fm(is)j(a)g(structure)f(whic)o(h)i
-(con)o(tains)f(all)h(the)f(infor-)300 2570 y(mation)e(that)g(bfd)g(needs)h
-(to)f(kno)o(w)f(to)h(tie)h(up)f(a)g(bac)o(k)g(end's)h(data.)390
-2620 y Fh(typedef)23 b(CONST)g(struct)g(reloc_howto_struct)390
-2670 y({)0 2770 y Fk(c)6 b(y)g(g)g(n)g(u)g(s)36 b(s)6 b(u)g(p)g(p)g(o)g(r)g
-(t)p 332 2761 1396 3 v 1421 w(Revision:)17 b(1.5)p eop
-%%Page: 27 29
-bop 0 -58 a Fk(Chapter)13 b(2:)k(BFD)c(front)g(end)p 413 -66
-669 3 v 691 w(DRAFT)p 1224 -66 V 695 w Fj(27)300 183 y Ff(The)18
-b(t)o(yp)q(e)g(\014eld)h(has)f(mainly)g(a)g(do)q(cumetary)g(use)g(-)g(the)g
-(bac)o(k)f(end)i(can)f(to)300 233 y(what)f(it)g(w)o(an)o(ts)e(with)i(it,)g
-(though)f(the)h(normally)g(the)f(bac)o(k)h(end's)g(external)300
-283 y(idea)f(of)24 b(what)15 b(a)g(relo)q(c)h(n)o(um)o(b)q(er)g(w)o(ould)g(b)
-q(e)g(w)o(ould)g(b)q(e)g(stored)f(in)h(this)g(\014eld.)300
-333 y(F)l(or)f(example,)f(the)f(a)f(PC)g(relativ)o(e)h(w)o(ord)f(relo)q
-(cation)i(in)f(a)g(co\013)f(en)o(vironmen)o(t)300 382 y(w)o(ould)i(ha)o(v)o
-(e)d(the)h(t)o(yp)q(e)g(023)f(-)h(b)q(ecause)h(that's)e(what)g(the)h(outside)
-g(w)o(orld)g(calls)300 432 y(a)j(R)p 374 432 14 2 v 17 w(PCR)-5
-b(W)o(ORD)15 b(relo)q(c.)438 482 y Fh(unsigned)22 b(int)i(type;)300
-548 y Ff(The)d(v)m(alue)h(the)f(\014nal)h(relo)q(cation)f(is)g(shifted)h
-(righ)o(t)f(b)o(y)l(.)36 b(This)22 b(drops)g(un-)300 598 y(w)o(an)o(ted)15
-b(data)f(from)h(the)g(relo)q(cation.)438 648 y Fh(unsigned)22
-b(int)i(rightshift;)300 714 y Ff(The)17 b(size)g(of)f(the)h(item)g(to)f(b)q
-(e)h(relo)q(cated)g(-)g(0,)f(is)h(one)g(b)o(yte,)f(1)h(is)g(2)f(b)o(ytes,)g
-(3)300 764 y(is)g(four)f(b)o(ytes.)438 814 y Fh(unsigned)22
-b(int)i(size;)300 880 y Ff(No)o(w)15 b(obsolete)438 929 y Fh(unsigned)22
-b(int)i(bitsize;)300 996 y Ff(Notes)16 b(that)f(the)i(relo)q(cation)f(is)h
-(relativ)o(e)g(to)e(the)i(lo)q(cation)g(in)g(the)f(data)g(sec-)300
-1045 y(tion)i(of)f(the)h(addend.)29 b(The)18 b(relo)q(cation)g(function)h
-(will)h(subtract)d(from)g(the)300 1095 y(relo)q(cation)f(v)m(alue)g(the)g
-(address)f(of)g(the)g(lo)q(cation)h(b)q(eing)g(relo)q(cated.)438
-1145 y Fh(boolean)23 b(pc_relative;)300 1211 y Ff(No)o(w)15
-b(obsolete)438 1261 y Fh(unsigned)22 b(int)i(bitpos;)300 1327
-y Ff(No)o(w)15 b(obsolete)438 1377 y Fh(boolean)23 b(absolute;)300
-1443 y Ff(Causes)10 b(the)h(relo)q(cation)h(routine)f(to)f(return)g(an)h
-(error)f(if)h(o)o(v)o(er\015o)o(w)e(is)k(detected)300 1493
-y(when)j(relo)q(cating.)438 1543 y Fh(boolean)23 b(complain_on_overflow;)300
-1609 y Ff(If)10 b(this)h(\014eld)h(is)e(non)h(n)o(ull,)h(then)f(the)f
-(supplied)j(function)e(is)f(called)i(rather)h(than)300 1658
-y(the)k(normal)g(function.)27 b(This)17 b(allo)o(ws)h(really)g(strange)e
-(relo)q(cation)i(metho)q(ds)300 1708 y(to)d(b)q(e)g(accomo)q(dated)g(\(eg,)g
-(i960)g(callj)h(instructions\).)438 1758 y Fh(bfd_reloc_status_enum_ty)o(pe)
-21 b(\(*special_function\)\(\);)300 1824 y Ff(The)15 b(textual)h(name)f(of)g
-(the)g(relo)q(cation)h(t)o(yp)q(e.)438 1874 y Fh(char)23 b(*name;)300
-1940 y Ff(When)17 b(p)q(erforming)h(a)f(partial)g(link,)i(some)d(formats)g(m)
-o(ust)h(mo)q(dify)g(the)j(re-)300 1990 y(lo)q(cations)c(rather)f(than)g(the)g
-(data)f(-)i(this)f(\015ag)g(signals)h(this.)438 2040 y Fh(boolean)23
-b(partial_inplace;)300 2106 y Ff(The)16 b(src)p 453 2106 V
-16 w(mask)f(is)h(used)g(to)f(select)h(what)f(parts)g(of)g(the)g(read)g(in)i
-(data)d(are)i(to)300 2156 y(b)q(e)j(used)f(in)h(the)f(relo)q(cation)g(sum.)28
-b(Eg,)18 b(if)h(this)f(w)o(as)f(an)h(8)f(bit)i(bit)f(of)g(data)300
-2205 y(whic)o(h)i(w)o(e)e(read)h(and)g(relo)q(cated,)h(this)g(w)o(ould)f(b)q
-(e)g(0x000000\013.)29 b(When)19 b(w)o(e)300 2255 y(ha)o(v)o(e)d(relo)q(cs)e
-(whic)o(h)h(ha)o(v)o(e)e(an)g(addend,)i(suc)o(h)f(as)f(sun4)h(extended)h
-(relo)q(cs,)f(the)300 2305 y(v)m(alue)22 b(in)d(the)f(o\013set)f(part)g(of)h
-(a)g(relo)q(cating)g(\014eld)i(is)e(garbage)f(so)h(w)o(e)g(nev)o(er)300
-2355 y(use)g(it.)i(In)c(this)g(case)f(the)g(mask)g(w)o(ould)g(b)q(e)h
-(0x00000000.)438 2405 y Fh(bfd_word)22 b(src_mask;)300 2471
-y Ff(The)11 b(dst)p 453 2471 V 16 w(mask)f(is)h(what)f(parts)g(of)g(the)h
-(instruction)g(are)f(replaced)i(in)o(to)f(the)i(in-)300 2521
-y(struction.)19 b(In)c(most)e(cases)g(src)p 846 2521 V 17 w(mask)g(==)h(dst)p
-1124 2521 V 17 w(mask,)f(except)h(in)h(the)e(ab)q(o)o(v)o(e)300
-2570 y(sp)q(ecial)25 b(case,)h(where)e(dst)p 780 2570 V 16
-w(mask)f(w)o(ould)h(b)q(e)g(0x000000\013,)f(and)h(src)p 1534
-2570 V 16 w(mask)300 2620 y(w)o(ould)17 b(b)q(e)f(0x00000000.)438
-2670 y Fh(bfd_word)22 b(dst_mask;)0 2770 y Fk(c)6 b(y)g(g)g(n)g(u)g(s)36
-b(s)6 b(u)g(p)g(p)g(o)g(r)g(t)p 332 2761 1396 3 v 1421 w(Revision:)17
-b(1.5)p eop
-%%Page: 28 30
-bop 0 -58 a Fk(Chapter)13 b(2:)k(BFD)c(front)g(end)p 413 -66
-669 3 v 691 w(DRAFT)p 1224 -66 V 695 w Fj(28)300 183 y Ff(When)18
-b(some)g(formats)e(create)i(PC)f(relativ)o(e)i(instructions,)g(they)f(lea)o
-(v)o(e)g(the)300 233 y(v)m(alue)g(of)f(the)g(p)q(c)g(of)g(the)g(place)g(b)q
-(eing)i(relo)q(cated)e(in)h(the)f(o\013set)f(slot)g(of)h(the)300
-283 y(instruction,)22 b(so)e(that)g(a)g(PC)g(relativ)o(e)h(relo)q(cation)h
-(can)e(b)q(e)h(made)g(just)f(b)o(y)300 333 y(adding)15 b(in)f(an)g(ordinary)g
-(o\013set)f(\(eg)g(sun3)h(a.out\).)k(Some)c(formats)e(lea)o(v)o(e)i(the)300
-382 y(displacemen)o(t)19 b(part)f(of)f(an)h(instruction)h(empt)o(y)f(\(eg)f
-(m88k)g(b)q(cs\),)i(this)f(\015ag)300 432 y(signals)e(the)f(fact.)438
-482 y Fh(boolean)23 b(pcrel_offset;)390 532 y(})h(reloc_howto_type;)0
-677 y Fr(2.7.0.3)30 b(HO)n(WTO)300 770 y Fm(The)15 b(HO)o(WTO)h(de\014ne)g
-(is)g(horrible)g(and)g(will)g(go)f(a)o(w)o(a)o(y)l(.)300 808
-y Fg(\013)p 325 808 1326 2 v 1325 w(\010)p 300 1057 2 225 v
-314 895 a Fh(#define)23 b(HOWTO\(C,)g(R,S,B,)g(P,)g(BI,)h(ABS,)f(O,)h(SF,)f
-(NAME,)g(INPLACE,)314 945 y(MASKSRC,)g(MASKDST,)g(PC\))g(\\)362
-994 y({\(unsigned\)C,R,S,B,)e(P,)j(BI,)f(ABS,O,SF,NAME,INPLACE,MASKS)o
-(RC,MASKD)o(ST,PC})p 1988 1004 21 42 v 1677 1057 2 225 v 300
-1082 a Fg(\012)p 325 1082 1326 2 v 1325 w(\011)0 1277 y Fr(2.7.0.4)30
-b(relo)r(c)p 339 1277 19 3 v 21 w(c)n(hain)300 1336 y Fg(\013)p
-325 1336 1326 2 v 1325 w(\010)p 300 1784 2 424 v 314 1422 a
-Fh(typedef)23 b(unsigned)g(char)g(bfd_byte;)314 1522 y(typedef)g(struct)g
-(relent_chain)f({)362 1572 y(arelent)h(relent;)362 1622 y(struct)71
-b(relent_chain)22 b(*next;)314 1672 y(})i(arelent_chain;)p
-1677 1784 V 300 1809 a Fg(\012)p 325 1809 1326 2 v 1325 w(\011)300
-1923 y Fm(If)e(an)f(output)p 558 1923 14 2 v 16 w(bfd)h(is)g(supplied)i(to)d
-(this)h(function)g(the)f(generated)h(image)300 1973 y(will)16
-b(b)q(e)e(relo)q(catable,)h(the)f(relo)q(cations)g(are)g(copied)h(to)e(the)h
-(output)g(\014le)h(after)300 2022 y(they)g(ha)o(v)o(e)f(b)q(een)i(c)o(hanged)
-f(to)g(re\015ect)g(the)g(new)g(state)f(of)g(the)h(w)o(orld.)20
-b(There)300 2072 y(are)15 b(t)o(w)o(o)g(w)o(a)o(ys)f(of)h(re\015ecting)i(the)
-f(results)g(of)f(partial)h(link)m(age)h(in)g(an)e(output)300
-2122 y(\014le;)22 b(b)o(y)d(mo)q(difying)h(the)g(output)f(data)f(in)i(place,)
-h(and)e(b)o(y)g(mo)q(difying)i(the)300 2172 y(relo)q(cation)h(record.)38
-b(Some)21 b(nativ)o(e)g(formats)f(\(eg)h(basic)h(a.out)e(and)h(basic)300
-2222 y(co\013)t(\))14 b(ha)o(v)o(e)h(no)g(w)o(a)o(y)f(of)h(sp)q(ecifying)i
-(an)f(addend)g(in)g(the)f(relo)q(cation)h(t)o(yp)q(e,)f(so)300
-2271 y(the)f(addend)h(has)e(to)g(go)h(in)g(the)g(output)g(data.)19
-b(This)14 b(is)g(no)g(big)h(deal)f(since)h(in)300 2321 y(these)g(formats)e
-(the)i(output)f(data)g(slot)g(will)j(alw)o(a)o(ys)d(b)q(e)h(big)g(enough)g
-(for)f(the)300 2371 y(addend.)30 b(Complex)19 b(relo)q(c)g(t)o(yp)q(es)f
-(with)g(addends)h(w)o(ere)f(in)o(v)o(en)o(ted)h(to)f(solv)o(e)300
-2421 y(just)d(this)h(problem.)390 2471 y Fh(PROTO\(bfd_reloc_status_enu)o
-(m_type,)772 2521 y(bfd_perform_relocation,)963 2570 y(\(bfd)23
-b(*)h(abfd,)963 2620 y(arelent)f(*reloc_entry,)963 2670 y(PTR)g(data,)0
-2770 y Fk(c)6 b(y)g(g)g(n)g(u)g(s)36 b(s)6 b(u)g(p)g(p)g(o)g(r)g(t)p
-332 2761 1396 3 v 1421 w(Revision:)17 b(1.5)p eop
-%%Page: 29 31
-bop 0 -58 a Fk(Chapter)13 b(2:)k(BFD)c(front)g(end)p 413 -66
-669 3 v 691 w(DRAFT)p 1224 -66 V 695 w Fj(29)963 183 y Fh(asection)22
-b(*input_section,)963 233 y(bfd)h(*output_bfd\)\);)0 2770 y
-Fk(c)6 b(y)g(g)g(n)g(u)g(s)36 b(s)6 b(u)g(p)g(p)g(o)g(r)g(t)p
-332 2761 1396 3 v 1421 w(Revision:)17 b(1.5)p eop
-%%Page: 30 32
-bop 0 -58 a Fk(Chapter)13 b(2:)k(BFD)c(front)g(end)p 413 -66
-669 3 v 691 w(DRAFT)p 1224 -66 V 695 w Fj(30)0 183 y Fn(2.8)33
-b(Core)21 b(\014les)300 275 y Fm(Bu\013)15 b(output)g(this)h(facinating)g
-(topic)0 407 y Fr(2.8.0.1)30 b(bfd)p 296 407 19 3 v 22 w(core)p
-429 407 V 22 w(\014le)p 530 407 V 22 w(failing)p 717 407 V
-21 w(command)300 499 y Fm(Returns)22 b(a)g(read-only)h(string)e(explaining)k
-(what)c(program)g(w)o(as)g(running)300 549 y(when)16 b(it)f(failed)i(and)e
-(pro)q(duced)h(the)g(core)f(\014le)h(b)q(eing)g(read)390 598
-y Fh(PROTO\(CONST)22 b(char)i(*,)f(bfd_core_file_failing_comman)o(d,)390
-648 y(\(bfd)g(*\)\);)0 781 y Fr(2.8.0.2)30 b(bfd)p 296 781
-V 22 w(core)p 429 781 V 22 w(\014le)p 530 781 V 22 w(failing)p
-717 781 V 21 w(signal)300 872 y Fm(Returns)17 b(the)f(signal)h(n)o(um)o(b)q
-(er)g(whic)o(h)g(caused)g(the)f(core)h(dump)g(whic)o(h)g(gen-)300
-922 y(erated)e(the)g(\014le)i(the)e(bfd)g(is)h(attatc)o(hed)e(to.)390
-972 y Fh(PROTO\(int,)22 b(bfd_core_file_failing_signal,)e(\(bfd)k(*\)\);)0
-1105 y Fr(2.8.0.3)30 b(core)p 320 1105 V 22 w(\014le)p 421
-1105 V 22 w(matc)n(hes)p 659 1105 V 23 w(executable)p 964 1105
-V 22 w(p)300 1196 y Fm(Returns)15 b Fh(true)g Fm(if)g(the)g(core)g(\014le)h
-(attatc)o(hed)e(to)h Ff(core)p 1214 1196 14 2 v 16 w(bfd)i
-Fm(w)o(as)d(generated)h(b)o(y)300 1246 y(a)g(run)g(of)g(the)g(executable)i
-(\014le)f(attatc)o(hed)e(to)h Ff(exec)p 1194 1246 V 17 w(bfd)p
-Fm(,)g(or)g(else)h Fh(false)p Fm(.)390 1296 y Fh(PROTO\(boolean,)22
-b(core_file_matches_executab)o(le_p,)485 1346 y(\(bfd)i(*core_bfd,)e(bfd)i
-(*exec_bfd\)\);)0 2770 y Fk(c)6 b(y)g(g)g(n)g(u)g(s)36 b(s)6
-b(u)g(p)g(p)g(o)g(r)g(t)p 332 2761 1396 3 v 1421 w(Revision:)17
-b(1.5)p eop
-%%Page: 31 33
-bop 0 -58 a Fk(Chapter)13 b(2:)k(BFD)c(front)g(end)p 413 -66
-669 3 v 691 w(DRAFT)p 1224 -66 V 695 w Fj(31)0 183 y Fn(2.9)33
-b(T)-6 b(argets)300 276 y Fm(Eac)o(h)17 b(p)q(ort)g(of)g(BFD)g(to)f(a)h
-(di\013eren)o(t)h(mac)o(hine)g(requries)g(the)f(creation)g(of)g(a)300
-325 y(target)11 b(bac)o(k)g(end.)20 b(All)13 b(the)f(bac)o(k)g(end)g(pro)o
-(vides)h(to)e(the)h(ro)q(ot)f(part)g(of)h(bfd)g(is)g(a)300
-375 y(structure)h(con)o(taining)i(p)q(oin)o(ters)f(to)f(functions)h(whic)o(h)
-h(p)q(erform)e(certain)h(lo)o(w)300 425 y(lev)o(el)k(op)q(erations)e(on)g
-(\014les.)25 b(BFD)15 b(translates)h(the)h(applications's)g(requests)300
-475 y(through)e(a)g(p)q(oin)o(ter)g(in)o(to)h(calls)g(to)e(the)i(bac)o(k)f
-(end)h(routines.)300 538 y(When)e(a)g(\014le)h(is)f(op)q(ened)h(with)f
-Fh(bfd_openr)p Fm(,)f(its)h(format)e(and)i(target)f(are)g(un-)300
-588 y(kno)o(wn.)19 b(BFD)12 b(uses)i(v)m(arious)f(mec)o(hanisms)h(to)e
-(determine)i(ho)o(w)e(to)h(in)o(terpret)300 638 y(the)i(\014le.)21
-b(The)16 b(op)q(eratios)f(p)q(erformed)g(are:)337 701 y Fq(\017)30
-b Fm(First)17 b(a)g(bfd)h(is)g(created)g(b)o(y)f(calling)i(the)f(in)o(ternal)
-g(routine)32 b Fh(new_bfd)p Fm(,)390 751 y(then)15 b Fh(bfd_find_target)f
-Fm(is)h(called)i(with)e(the)h(target)d(string)j(supplied)390
-800 y(to)f Fh(bfd_openr)e Fm(and)j(the)f(new)h(bfd)f(p)q(oin)o(ter.)337
-864 y Fq(\017)30 b Fm(If)21 b(a)f(n)o(ull)h(target)e(string)i(w)o(as)e(pro)o
-(vided)i(to)51 b Fh(bfd_find_target)p Fm(,)19 b(it)390 914
-y(lo)q(oks)d(up)h(the)f(en)o(vironmen)o(t)g(v)m(ariable)23
-b Fh(GNUTARGET)15 b Fm(and)i(uses)f(that)f(as)390 963 y(the)g(target)f
-(string.)337 1027 y Fq(\017)30 b Fm(If)12 b(the)h(target)e(string)h(is)g
-(still)i(NULL,)f(or)e(the)i(target)e(string)h(is)g Fh(default)p
-Fm(,)390 1076 y(then)h(the)f(\014rst)g(item)g(in)h(the)g(target)e(v)o(ector)g
-(is)i(used)g(as)f(the)g(target)f(t)o(yp)q(e.)390 1126 y(See)16
-b Fq(h)p Fm(unde\014ned)p Fq(i)g Fm([targets],)d(page)i Fq(h)p
-Fm(unde\014ned)p Fq(i)p Fm(.)337 1189 y Fq(\017)30 b Fm(Otherwise,)19
-b(the)e(elemen)o(ts)h(in)h(the)e(target)g(v)o(ector)f(are)h(insp)q(ected)j
-(one)390 1239 y(b)o(y)f(one,)h(un)o(til)g(a)f(matc)o(h)f(on)h(target)f(name)h
-(is)h(found.)32 b(When)19 b(found,)390 1289 y(that)14 b(is)i(used.)337
-1352 y Fq(\017)30 b Fm(Otherwise)15 b(the)f(error)g Fh(invalid_target)e
-Fm(is)j(returned)f(to)g Fh(bfd_openr)p Fm(.)337 1415 y Fq(\017)30
-b Fh(bfd_openr)13 b Fm(attempts)g(to)g(op)q(en)i(the)f(\014le)h(using)g
-Fh(bfd_open_file)p Fm(,)d(and)390 1465 y(returns)j(the)g(bfd.)300
-1528 y(Once)e(the)g(bfd)f(has)g(b)q(een)i(op)q(ened)f(and)g(the)f(target)f
-(selected,)j(the)e(\014le)h(format)300 1578 y(ma)o(y)j(b)q(e)h(determined.)26
-b(This)17 b(is)g(done)g(b)o(y)g(calling)27 b Fh(bfd_check_format)14
-b Fm(on)300 1628 y(the)f(bfd)h(with)g(a)f(suggested)g(format.)18
-b(The)13 b(routine)h(returns)f Fh(true)g Fm(when)h(the)300
-1678 y(application)j(guesses)e(righ)o(t.)0 1819 y Fr(2.9.0.1)30
-b(bfd)p 296 1819 19 3 v 22 w(target)0 1990 y(2.9.1)g(bfd)p
-248 1990 V 22 w(target)300 2082 y Fm(This)16 b(structure)f(con)o(tains)h(ev)o
-(erything)g(that)f(BFD)g(kno)o(ws)g(ab)q(out)g(a)h(target.)300
-2132 y(It)g(includes)i(things)f(lik)o(e)g(its)f(b)o(yte)f(order,)h(name,)g
-(what)f(routines)h(to)g(call)h(to)300 2181 y(do)e(v)m(arious)h(op)q
-(erations,)f(etc.)300 2245 y(Ev)o(ery)g(BFD)g(p)q(oin)o(ts)g(to)g(a)g(target)
-f(structure)h(with)g(its)g Fh(")p Fm(xv)o(ec)p Fh(")g Fm(mem)o(b)q(er.)300
-2308 y(Shortcut)f(for)g(declaring)h(\014elds)h(whic)o(h)f(are)f(protot)o(yp)q
-(ed)g(function)h(p)q(oin)o(ters,)300 2358 y(while)i(a)o(v)o(oiding)e(anguish)
-h(on)f(compilers)i(that)d(don't)h(supp)q(ort)g(protos.)390
-2408 y Fh(#define)23 b(SDEF\(ret,)g(name,)g(arglist\))f(\\)772
-2457 y(PROTO\(ret,\(*name\),arglist)o(\))390 2507 y(#define)h(SDEF_FMT\(ret,)
-f(name,)h(arglist\))g(\\)772 2557 y(PROTO\(ret,\(*name[bfd_type)o(_end]\),)o
-(arglist)o(\))p 2026 2567 21 42 v 300 2620 a Fm(These)34 b(macros)e(are)h
-(used)g(to)g(dispatc)o(h)h(to)e(functions)i(through)f(the)300
-2670 y(bfd)p 367 2670 14 2 v 17 w(target)21 b(v)o(ector.)40
-b(They)22 b(are)g(used)h(in)g(a)f(n)o(um)o(b)q(er)g(of)g(macros)f(further)0
-2770 y Fk(c)6 b(y)g(g)g(n)g(u)g(s)36 b(s)6 b(u)g(p)g(p)g(o)g(r)g(t)p
-332 2761 1396 3 v 1421 w(Revision:)17 b(1.5)p eop
-%%Page: 32 34
-bop 0 -58 a Fk(Chapter)13 b(2:)k(BFD)c(front)g(end)p 413 -66
-669 3 v 691 w(DRAFT)p 1224 -66 V 695 w Fj(32)300 183 y Fm(do)o(wn)19
-b(in)h(bfd.h,)h(and)e(are)g(also)g(used)h(when)g(calling)h(v)m(arious)f
-(routines)g(b)o(y)300 233 y(hand)e(inside)i(the)e(bfd)g(implemen)o(tation.)29
-b(The)18 b Fh(")p Fm(arglist)p Fh(")g Fm(argumen)o(t)f(m)o(ust)300
-283 y(b)q(e)12 b(paren)o(thesized;)i(it)e(con)o(tains)g(all)h(the)e(argumen)o
-(ts)g(to)g(the)h(called)h(function.)390 333 y Fh(#define)23
-b(BFD_SEND\(bfd,)f(message,)h(arglist\))g(\\)748 382 y
-(\(\(*\(\(bfd\)->xvec->message\)\))d(arglist\))300 447 y Fm(F)l(or)15
-b(op)q(erations)g(whic)o(h)h(index)g(on)g(the)f(bfd)g(format)390
-497 y Fh(#define)23 b(BFD_SEND_FMT\(bfd,)e(message,)i(arglist\))g(\\)676
-547 y(\(\(\(bfd\)->xvec->message[\(int\)\()o(\(bfd\)->)o(format\))o(]\))p
-2050 557 21 42 v 390 597 a(arglist\))300 662 y Fm(This)15 b(is)f(the)h
-(struct)e(whic)o(h)i(de\014nes)g(the)g(t)o(yp)q(e)f(of)g(BFD)f(this)i(is.)20
-b(The)14 b Fh(")p Fm(xv)o(ec)p Fh(")300 711 y Fm(mem)o(b)q(er)f(of)f(the)h
-(struct)g(bfd)g(itself)h(p)q(oin)o(ts)f(here.)19 b(Eac)o(h)13
-b(mo)q(dule)h(that)e(imple-)300 761 y(men)o(ts)j(access)g(to)g(a)g
-(di\013eren)o(t)g(target)f(under)i(BFD,)e(de\014nes)j(one)e(of)g(these.)300
-826 y(FIXME,)i(these)h(names)g(should)h(b)q(e)f(rationalised)h(with)g(the)f
-(names)f(of)h(the)300 876 y(en)o(try)e(p)q(oin)o(ts)i(whic)o(h)f(call)h
-(them.)25 b(T)l(o)q(o)16 b(bad)h(w)o(e)g(can't)f(ha)o(v)o(e)h(one)g(macro)f
-(to)300 926 y(de\014ne)g(them)f(b)q(oth!)390 976 y Fh(typedef)23
-b(struct)g(bfd_target)390 1025 y({)300 1090 y Ff(iden)o(ti\014es)17
-b(the)e(kind)h(of)f(target,)f(eg)h(SunOS4,)h(Ultrix,)f(etc)438
-1140 y Fh(char)23 b(*name;)300 1205 y Ff(The)11 b Fh(")p Ff(\015a)o(v)o(our)p
-Fh(")g Ff(of)f(a)h(bac)o(k)g(end)h(is)g(a)f(general)g(indication)i(ab)q(out)e
-(the)h(con)o(ten)o(ts)300 1255 y(of)j(a)g(\014le.)438 1304
-y Fh(enum)23 b(target_flavour_enum)e({)485 1354 y
-(bfd_target_aout_flavour_enum,)485 1404 y(bfd_target_coff_flavour_enum,)485
-1454 y(bfd_target_ieee_flavour_enum,)485 1504 y
-(bfd_target_oasys_flavour_enum)o(,)485 1554 y(bfd_target_srec_flavour_enum})f
-(flavour;)300 1618 y Ff(The)15 b(order)g(of)g(b)o(ytes)g(within)h(the)g(data)
-e(area)h(of)g(a)g(\014le.)438 1668 y Fh(boolean)23 b(byteorder_big_p;)300
-1733 y Ff(The)15 b(order)g(of)g(b)o(ytes)g(within)h(the)g(header)f(parts)g
-(of)g(a)g(\014le.)438 1783 y Fh(boolean)23 b(header_byteorder_big_p;)300
-1848 y Ff(This)c(is)f(a)g(mask)g(of)g(all)h(the)f(\015ags)g(whic)o(h)h(an)f
-(executable)i(ma)o(y)d(ha)o(v)o(e)h(set)g(-)300 1897 y(from)c(the)i(set)f
-Fh(NO_FLAGS)p Ff(,)e Fh(HAS_RELOC)p Ff(,)h(...)p Fh(D_PAGED)p
-Ff(.)438 1947 y Fh(flagword)22 b(object_flags;)300 2012 y Ff(This)c(is)g(a)f
-(mask)f(of)h(all)i(the)e(\015ags)g(whic)o(h)h(a)f(section)h(ma)o(y)e(ha)o(v)o
-(e)h(set)g(-)h(from)300 2062 y(the)d(set)g Fh(SEC_NO_FLAGS)p
-Ff(,)e Fh(SEC_ALLOC)p Ff(,)h(...)p Fh(SET_NEVER_LOAD)p Ff(.)438
-2112 y Fh(flagword)22 b(section_flags;)300 2177 y Ff(The)15
-b(pad)h(c)o(haracter)e(for)h(\014lenames)h(within)h(an)e(arc)o(hiv)o(e)g
-(header.)438 2226 y Fh(char)23 b(ar_pad_char;)300 2291 y Ff(The)15
-b(maxim)o(um)h(n)o(um)o(b)q(er)f(of)g(c)o(haracters)f(in)i(an)f(arc)o(hiv)o
-(e)h(header.)414 2341 y Fh(unsigned)23 b(short)g(ar_max_namelen;)300
-2406 y Ff(The)15 b(minim)o(um)i(alignmen)o(t)f(restriction)f(for)g(an)o(y)g
-(section.)438 2456 y Fh(unsigned)22 b(int)i(align_power_min;)300
-2521 y Ff(En)o(tries)16 b(for)f(b)o(yte)h(sw)o(apping)g(for)g(data.)21
-b(These)16 b(are)g(di\013eren)o(t)g(to)f(the)h(other)300 2570
-y(en)o(try)j(p)q(oin)o(ts,)i(since)g(they)e(don't)g(tak)o(e)g(bfd)h(as)f
-(\014rst)g(arg.)33 b(Certain)19 b(other)300 2620 y(handlers)f(could)e(do)f
-(the)h(same.)438 2670 y Fh(SDEF)23 b(\(bfd_vma,)142 b(bfd_getx64,)22
-b(\(bfd_byte)h(*\)\);)0 2770 y Fk(c)6 b(y)g(g)g(n)g(u)g(s)36
-b(s)6 b(u)g(p)g(p)g(o)g(r)g(t)p 332 2761 1396 3 v 1421 w(Revision:)17
-b(1.5)p eop
-%%Page: 33 35
-bop 0 -58 a Fk(Chapter)13 b(2:)k(BFD)c(front)g(end)p 413 -66
-669 3 v 691 w(DRAFT)p 1224 -66 V 695 w Fj(33)438 183 y Fh(SDEF)23
-b(\(void,)214 b(bfd_putx64,)22 b(\(bfd_vma,)h(bfd_byte)390
-233 y(*\)\);)438 283 y(SDEF)g(\(bfd_vma,)g(bfd_getx32,)f(\(bfd_byte)h(*\)\);)
-438 333 y(SDEF)g(\(void,)214 b(bfd_putx32,)22 b(\(bfd_vma,)h(bfd_byte)390
-382 y(*\)\);)438 432 y(SDEF)g(\(bfd_vma,)g(bfd_getx16,)f(\(bfd_byte)h(*\)\);)
-438 482 y(SDEF)g(\(void,)214 b(bfd_putx16,)22 b(\(bfd_vma,)h(bfd_byte)390
-532 y(*\)\);)300 600 y Ff(Byte)15 b(sw)o(apping)h(for)e(the)i(headers)438
-650 y Fh(SDEF)23 b(\(bfd_vma,)70 b(bfd_h_getx64,)22 b(\(bfd_byte)h(*\)\);)438
-700 y(SDEF)g(\(void,)238 b(bfd_h_putx64,)22 b(\(bfd_vma,)h(bfd_byte)p
-2002 710 21 42 v 390 749 a(*\)\);)438 799 y(SDEF)g(\(bfd_vma,)47
-b(bfd_h_getx32,)22 b(\(bfd_byte)g(*\)\);)438 849 y(SDEF)h(\(void,)238
-b(bfd_h_putx32,)22 b(\(bfd_vma,)h(bfd_byte)p 2002 859 V 390
-899 a(*\)\);)438 949 y(SDEF)g(\(bfd_vma,)47 b(bfd_h_getx16,)22
-b(\(bfd_byte)g(*\)\);)438 998 y(SDEF)h(\(void,)238 b(bfd_h_putx16,)22
-b(\(bfd_vma,)h(bfd_byte)p 2002 1009 V 390 1048 a(*\)\);)300
-1116 y Ff(F)l(ormat)17 b(dep)q(enden)o(t)i(routines,)g(these)g(turn)f(in)o
-(to)g(v)o(ectors)f(of)h(en)o(try)g(p)q(oin)o(ts)300 1166 y(within)e(the)g
-(target)e(v)o(ector)g(structure;)h(one)g(for)g(eac)o(h)g(format)f(to)g(c)o
-(hec)o(k.)300 1234 y(Chec)o(k)h(the)h(format)e(of)g(a)h(\014le)h(b)q(eing)h
-(read.)j(Return)15 b(bfd)p 1288 1234 14 2 v 17 w(target)f(*)h(or)g(zero.)438
-1284 y Fh(SDEF_FMT)22 b(\(struct)h(bfd_target)g(*,)g(_bfd_check_format,)390
-1334 y(\(bfd)g(*\)\);)300 1402 y Ff(Set)15 b(the)h(format)d(of)i(a)g(\014le)h
-(b)q(eing)h(written.)438 1452 y Fh(SDEF_FMT)22 b(\(boolean,)286
-b(_bfd_set_format,)21 b(\(bfd)390 1501 y(*\)\);)300 1569 y
-Ff(W)l(rite)15 b(cac)o(hed)h(information)f(in)o(to)h(a)f(\014le)h(b)q(eing)g
-(written,)f(at)g(bfd)p 1441 1569 V 16 w(close.)438 1619 y Fh(SDEF_FMT)22
-b(\(boolean,)286 b(_bfd_write_contents,)390 1669 y(\(bfd)23
-b(*\)\);)300 1737 y Ff(The)15 b(follo)o(wing)g(functions)g(are)f(de\014ned)h
-(in)g Fh(JUMP_TABLE)p Ff(.)j(The)d(idea)g(is)i(that)300 1787
-y(the)e(bac)o(k)h(end)g(writer)f(of)h Fh(foo)f Ff(names)g(all)h(the)g
-(routines)i Fh(foo_)p Ff(en)o(try)p 1506 1787 V 16 w(p)q(oin)o(t,)300
-1837 y Fh(JUMP_TABLE)12 b Ff(will)j(built)g(the)f(en)o(tries)i(in)e(this)g
-(structure)f(in)i(the)e(righ)o(t)h(order.)300 1905 y(Core)h(\014le)h(en)o
-(try)f(p)q(oin)o(ts)438 1954 y Fh(SDEF)23 b(\(char)g(*,)h
-(_core_file_failing_comman)o(d,)d(\(bfd)i(*\)\);)438 2004 y(SDEF)g(\(int,)95
-b(_core_file_failing_signal)o(,)21 b(\(bfd)i(*\)\);)438 2054
-y(SDEF)g(\(boolean,)g(_core_file_matches_execu)o(table_p)o(,)e(\(bfd)390
-2104 y(*,)j(bfd)f(*\)\);)300 2172 y Ff(Arc)o(hiv)o(e)16 b(en)o(try)f(p)q(oin)
-o(ts)414 2222 y Fh(SDEF)23 b(\(boolean,)g(_bfd_slurp_armap,)e(\(bfd)j(*\)\);)
-414 2271 y(SDEF)f(\(boolean,)g(_bfd_slurp_extended_name_)o(table,)d(\(bfd)390
-2321 y(*\)\);)414 2371 y(SDEF)j(\(void,)71 b(_bfd_truncate_arname,)21
-b(\(bfd)i(*,)h(CONST)390 2421 y(char)f(*,)h(char)f(*\)\);)414
-2471 y(SDEF)g(\(boolean,)g(write_armap,)f(\(bfd)h(*arch,)1106
-2521 y(unsigned)g(int)g(elength,)1106 2570 y(struct)g(orl)g(*map,)1106
-2620 y(int)g(orl_count,)1106 2670 y(int)g(stridx\)\);)0 2770
-y Fk(c)6 b(y)g(g)g(n)g(u)g(s)36 b(s)6 b(u)g(p)g(p)g(o)g(r)g(t)p
-332 2761 1396 3 v 1421 w(Revision:)17 b(1.5)p eop
-%%Page: 34 36
-bop 0 -58 a Fk(Chapter)13 b(2:)k(BFD)c(front)g(end)p 413 -66
-669 3 v 691 w(DRAFT)p 1224 -66 V 695 w Fj(34)300 183 y Ff(Standard)i
-(stu\013.)438 233 y Fh(SDEF)23 b(\(boolean,)g(_close_and_cleanup,)e(\(bfd)i
-(*\)\);)438 283 y(SDEF)g(\(boolean,)g(_bfd_set_section_content)o(s,)e(\(bfd)i
-(*,)390 333 y(sec_ptr,)g(PTR,)1440 382 y(file_ptr,)390 432
-y(bfd_size_type\)\);)438 482 y(SDEF)g(\(boolean,)g(_bfd_get_section_content)o
-(s,)e(\(bfd)i(*,)390 532 y(sec_ptr,)g(PTR,)1440 582 y(file_ptr,)390
-632 y(bfd_size_type\)\);)438 681 y(SDEF)g(\(boolean,)g(_new_section_hook,)e
-(\(bfd)i(*,)h(sec_ptr\)\);)300 777 y Ff(Sym)o(b)q(ols)16 b(and)f(relo)q
-(ctions)414 827 y Fh(SDEF)23 b(\(unsigned)g(int,)g(_get_symtab_upper_bound,)e
-(\(bfd)390 877 y(*\)\);)438 927 y(SDEF)i(\(unsigned)g(int,)g
-(_bfd_canonicalize_symtab,)652 976 y(\(bfd)h(*,)f(struct)g
-(symbol_cache_entry)f(**\)\);)438 1026 y(SDEF)h(\(unsigned)g(int,)g
-(_get_reloc_upper_bound,)e(\(bfd)390 1076 y(*,)j(sec_ptr\)\);)438
-1126 y(SDEF)f(\(unsigned)g(int,)g(_bfd_canonicalize_reloc,)e(\(bfd)390
-1176 y(*,)j(sec_ptr,)e(arelent)h(**,)1512 1225 y(struct)390
-1275 y(symbol_cache_entry**\)\);)438 1325 y(SDEF)g(\(struct)g
-(symbol_cache_entry)45 b(*,)24 b(_bfd_make_empty_symbol,)p
-2146 1335 21 42 v 390 1375 a(\(bfd)f(*\)\);)438 1425 y(SDEF)g(\(void,)119
-b(_bfd_print_symbol,)21 b(\(bfd)i(*,)h(PTR,)f(struct)p 2026
-1435 V 390 1474 a(symbol_cache_entry)45 b(*,)1297 1524 y
-(bfd_print_symbol_enum_typ)o(e\)\);)p 2289 1534 V 390 1574
-a(#define)23 b(bfd_print_symbol\(b,p,s,e\))d(BFD_SEND\(b,)j
-(_bfd_print_symbol,)p 2217 1584 V 390 1624 a(\(b,p,s,e\)\))438
-1674 y(SDEF)g(\(alent)g(*,)71 b(_get_lineno,)23 b(\(bfd)g(*,)h(struct)f(sym-)
-390 1724 y(bol_cache_entry)46 b(*\)\);)438 1823 y(SDEF)23 b(\(boolean,)70
-b(_bfd_set_arch_mach,)22 b(\(bfd)h(*,)h(enum)390 1873 y(bfd_architecture,)
-1321 1923 y(unsigned)e(long\)\);)p 2002 1933 V 438 2022 a(SDEF)h(\(bfd)g(*,)
-48 b(openr_next_archived_file,)20 b(\(bfd)k(*arch,)390 2072
-y(bfd)f(*prev\)\);)438 2122 y(SDEF)g(\(boolean,)g(_bfd_find_nearest_line,)581
-2172 y(\(bfd)g(*abfd,)g(struct)g(sec)48 b(*section,)605 2222
-y(struct)23 b(symbol_cache_entry)45 b(**symbols,bfd_vma)390
-2271 y(offset,)581 2321 y(CONST)23 b(char)g(**file,)g(CONST)g(char)h(**func,)
-f(unsigned)390 2371 y(int)g(*line\)\);)438 2421 y(SDEF)g(\(int,)95
-b(_bfd_stat_arch_elt,)21 b(\(bfd)i(*,)h(struct)390 2471 y(stat)f(*\)\);)438
-2570 y(SDEF)g(\(int,)95 b(_bfd_sizeof_headers,)21 b(\(bfd)i(*,)h
-(boolean\)\);)p 2002 2576 21 38 v 438 2670 a(SDEF)f(\(void,)g
-(_bfd_debug_info_start,)e(\(bfd)i(*\)\);)0 2770 y Fk(c)6 b(y)g(g)g(n)g(u)g(s)
-36 b(s)6 b(u)g(p)g(p)g(o)g(r)g(t)p 332 2761 1396 3 v 1421 w(Revision:)17
-b(1.5)p eop
-%%Page: 35 37
-bop 0 -58 a Fk(Chapter)13 b(2:)k(BFD)c(front)g(end)p 413 -66
-669 3 v 691 w(DRAFT)p 1224 -66 V 695 w Fj(35)438 183 y Fh(SDEF)23
-b(\(void,)g(_bfd_debug_info_end,)e(\(bfd)j(*\)\);)438 233 y(SDEF)f(\(void,)g
-(_bfd_debug_info_accumulate,)d(\(bfd)k(*,)f(struct)p 2026 243
-21 42 v 390 283 a(sec)47 b(*\)\);)300 345 y Ff(Sp)q(ecial)17
-b(en)o(try)e(p)q(oin)o(ts)h(for)e(gdb)i(to)e(sw)o(ap)h(in)h(co\013)e(sym)o(b)
-q(ol)i(table)g(parts)438 395 y Fh(SDEF\(void,)22 b(_bfd_coff_swap_aux_in,\()
-557 445 y(bfd)286 b(*abfd)23 b(,)557 495 y(PTR)310 b(ext,)557
-544 y(int)g(type,)557 594 y(int)g(class)23 b(,)557 644 y(PTR)310
-b(in\)\);)438 744 y(SDEF\(void,)22 b(_bfd_coff_swap_sym_in,\()557
-793 y(bfd)286 b(*abfd)23 b(,)557 843 y(PTR)310 b(ext,)557 893
-y(PTR)g(in\)\);)438 993 y(SDEF\(void,)22 b(_bfd_coff_swap_lineno_in,)45
-b(\()557 1043 y(bfd)286 b(*abfd,)557 1092 y(PTR)g(ext,)557
-1142 y(PTR)310 b(in\)\);)390 1242 y(})24 b(bfd_target;)0 1375
-y Fr(2.9.1.1)30 b(bfd)p 296 1375 19 3 v 22 w(\014nd)p 420 1375
-V 22 w(target)300 1466 y Fm(Returns)15 b(a)f(p)q(oin)o(ter)h(to)f(the)h
-(transfer)f(v)o(ector)g(for)g(the)g(ob)s(ject)g(target)g(named)300
-1516 y(target)p 423 1516 14 2 v 15 w(name.)26 b(If)18 b(target)p
-751 1516 V 15 w(name)f(is)h(NULL,)g(c)o(ho)q(oses)f(the)g(one)h(in)g(the)f
-(en)o(vi-)300 1566 y(ronmen)o(t)f(v)m(ariable)i(GNUT)l(AR)o(GET;)e(if)h(that)
-g(is)g(n)o(ull)h(or)e(not)h(de\014ned)h(then)300 1615 y(the)d(\014rst)g(en)o
-(try)g(in)h(the)f(target)f(list)i(is)g(c)o(hosen.)k(P)o(assing)15
-b(in)h(the)f(string)h Fh(")p Fm(de-)300 1665 y(fault)p Fh(")d
-Fm(or)f(setting)h(the)g(en)o(vironmen)o(t)g(v)m(ariable)i(to)d
-Fh(")p Fm(default)p Fh(")h Fm(will)i(cause)e(the)300 1715 y(\014rst)k(en)o
-(try)h(in)h(the)f(target)e(list)j(to)e(b)q(e)h(returned,)h(and)f
-Fh(")p Fm(target)p 1431 1715 V 15 w(defaulted)p Fh(")300 1765
-y Fm(will)f(b)q(e)g(set)e(in)i(the)e(bfd.)22 b(This)16 b(causes)g(bfd)p
-1062 1765 V 17 w(c)o(hec)o(k)p 1186 1765 V 17 w(format)e(to)h(lo)q(op)h(o)o
-(v)o(er)f(all)300 1815 y(the)g(targets)f(to)h(\014nd)h(the)f(one)g(that)g
-(matc)o(hes)g(the)g(\014le)h(b)q(eing)g(read.)390 1864 y Fh
-(PROTO\(bfd_target)22 b(*,)h(bfd_find_target,\(CONST)e(char)i(*,)390
-1914 y(bfd)g(*\)\);)0 2047 y Fr(2.9.1.2)30 b(bfd)p 296 2047
-19 3 v 22 w(target)p 480 2047 V 21 w(list)300 2138 y Fm(This)15
-b(function)f(returns)g(a)g(freshly)g(mallo)q(ced)i(NULL-terminated)f(v)o
-(ector)e(of)300 2188 y(the)i(names)g(of)g(all)h(the)g(v)m(alid)g(bfd)g
-(targets.)j(Do)14 b(not)h(mo)q(dify)h(the)f(names)390 2238
-y Fh(PROTO\(CONST)22 b(char)i(**,bfd_target_list,\(\)\);)0
-2770 y Fk(c)6 b(y)g(g)g(n)g(u)g(s)36 b(s)6 b(u)g(p)g(p)g(o)g(r)g(t)p
-332 2761 1396 3 v 1421 w(Revision:)17 b(1.5)p eop
-%%Page: 36 38
-bop 0 -58 a Fk(Chapter)13 b(2:)k(BFD)c(front)g(end)p 413 -66
-669 3 v 691 w(DRAFT)p 1224 -66 V 695 w Fj(36)0 183 y Fn(2.10)32
-b(Arc)n(hitectures)300 436 y Fm(BFD's)15 b(idea)i(of)f(an)g(arc)o(hitecture)h
-(is)f(implimen)o(ted)j(in)k Fh(archures.c)p Fm(.)e(BFD)300
-486 y(k)o(eeps)h(t)o(w)o(o)f(atoms)g(in)i(a)e(bfd)i(describing)h(the)e(arc)o
-(hitecture)g(of)g(the)g(data)300 535 y(attatc)o(hed)c(to)h(the)g(bfd,)h(the)
-43 b Fh(enum)15 b(bfd_architecture)e(arch)18 b Fm(\014eld)j(and)300
-585 y(the)15 b Fh(unsigned)f(long)h(machine)f Fm(\014eld.)0
-2168 y Fr(2.10.0.1)29 b(bfd)p 326 2168 19 3 v 22 w(arc)n(hitecture)300
-2421 y Fm(This)14 b(en)o(um)f(giv)o(es)g(the)g(ob)s(ject)g(\014le's)g(CPU)g
-(arc)o(hitecture,)h(in)f(a)g(global)h(sense.)300 2471 y(E.g.)40
-b(what)21 b(pro)q(cessor)h(family)g(do)q(es)h(it)f(b)q(elong)h(to?)41
-b(There)22 b(is)g(another)300 2521 y(\014eld,)14 b(whic)o(h)g(indicates)g
-(what)e(pro)q(cessor)g(within)i(the)f(family)h(is)f(in)g(use.)20
-b(The)300 2570 y(mac)o(hine)d(giv)o(es)e(a)h(n)o(um)o(b)q(er)g(whic)o(h)g
-(distingushes)i(di\013eren)o(t)e(v)o(ersions)g(of)f(the)300
-2620 y(arc)o(hitecture,)j(con)o(taining)g(for)f(example)h(2)f(and)g(3)g(for)g
-(In)o(tel)h(i960)f(KA)h(and)300 2670 y(i960)d(KB,)g(and)h(68020)d(and)j
-(68030)e(for)g(Motorola)g(68020)g(and)h(68030.)0 2770 y Fk(c)6
-b(y)g(g)g(n)g(u)g(s)36 b(s)6 b(u)g(p)g(p)g(o)g(r)g(t)p 332
-2761 1396 3 v 1421 w(Revision:)17 b(1.5)p eop
-%%Page: 37 39
-bop 0 -58 a Fk(Chapter)13 b(2:)k(BFD)c(front)g(end)p 413 -66
-669 3 v 691 w(DRAFT)p 1224 -66 V 695 w Fj(37)300 26 y Fg(\013)p
-325 26 1326 2 v 1325 w(\010)p 300 1968 2 1918 v 314 112 a Fh(enum)23
-b(bfd_architecture)314 162 y({)362 212 y(bfd_arch_unknown,)69
-b(/*)24 b(File)f(arch)g(not)h(known)f(*/)362 262 y(bfd_arch_obscure,)69
-b(/*)24 b(Arch)f(known,)g(not)h(one)f(of)h(these)f(*/)362 311
-y(bfd_arch_m68k,)141 b(/*)24 b(Motorola)e(68xxx)i(*/)362 361
-y(bfd_arch_vax,)165 b(/*)24 b(DEC)f(Vax)h(*/)362 411 y(bfd_arch_i960,)141
-b(/*)24 b(Intel)f(960)g(*/)410 461 y(/*)g(The)h(order)f(of)g(the)h(following)
-e(is)i(important.)481 511 y(lower)f(number)g(indicates)g(a)h(machine)f(type)g
-(that)481 560 y(only)g(accepts)g(a)h(subset)f(of)h(the)f(instructions)481
-610 y(available)g(to)g(machines)g(with)g(higher)h(numbers.)481
-660 y(The)g(exception)e(is)i(the)f("ca",)g(which)h(is)481 710
-y(incompatible)e(with)i(all)f(other)g(machines)g(except)481
-760 y("core".)g(*/)314 859 y(#define)g(bfd_mach_i960_core)141
-b(1)314 909 y(#define)23 b(bfd_mach_i960_ka_sa)117 b(2)314
-959 y(#define)23 b(bfd_mach_i960_kb_sb)117 b(3)314 1009 y(#define)23
-b(bfd_mach_i960_mc)189 b(4)314 1059 y(#define)23 b(bfd_mach_i960_xa)189
-b(5)314 1108 y(#define)23 b(bfd_mach_i960_ca)189 b(6)362 1208
-y(bfd_arch_a29k,)141 b(/*)24 b(AMD)f(29000)g(*/)362 1258 y(bfd_arch_sparc,)
-117 b(/*)24 b(SPARC)f(*/)362 1308 y(bfd_arch_mips,)141 b(/*)24
-b(MIPS)f(Rxxxx)g(*/)362 1357 y(bfd_arch_i386,)141 b(/*)24 b(Intel)f(386)g(*/)
-362 1407 y(bfd_arch_ns32k,)117 b(/*)24 b(National)e(Semiconductor)h(32xxx)g
-(*/)362 1457 y(bfd_arch_tahoe,)117 b(/*)24 b(CCI/Harris)e(Tahoe)h(*/)362
-1507 y(bfd_arch_i860,)141 b(/*)24 b(Intel)f(860)g(*/)362 1557
-y(bfd_arch_romp,)141 b(/*)24 b(IBM)f(ROMP)g(RS/6000)g(*/)362
-1606 y(bfd_arch_alliant,)69 b(/*)24 b(Alliant)f(*/)362 1656
-y(bfd_arch_convex,)93 b(/*)24 b(Convex)f(*/)362 1706 y(bfd_arch_m88k,)141
-b(/*)24 b(Motorola)e(88xxx)i(*/)362 1756 y(bfd_arch_pyramid,)69
-b(/*)24 b(Pyramid)f(Technology)f(*/)362 1806 y(bfd_arch_h8_300,)93
-b(/*)24 b(Hitachi)f(H8/300)g(*/)362 1856 y(bfd_arch_last)362
-1905 y(};)p 1677 1968 V 300 1993 a Fg(\012)p 325 1993 1326
-2 v 1325 w(\011)300 2118 y Fm(stu\013)0 2367 y Fr(2.10.0.2)29
-b(bfd)p 326 2367 19 3 v 22 w(prinable)p 567 2367 V 23 w(arc)n(h)p
-704 2367 V 22 w(mac)n(h)300 2471 y Fm(Return)d(a)g(prin)o(table)h(string)e
-(represen)o(ting)i(the)e(arc)o(hitecture)h(and)g(ma-)300 2521
-y(c)o(hine)34 b(t)o(yp)q(e.)71 b(The)33 b(result)g(is)g(only)g(go)q(o)q(d)f
-(un)o(til)i(the)e(next)h(call)h(to)300 2570 y(bfd)p 367 2570
-14 2 v 17 w(prin)o(table)p 561 2570 V 17 w(arc)o(h)p 663 2570
-V 16 w(mac)o(h.)390 2620 y Fh(PROTO\(CONST)22 b(char)i
-(*,bfd_printable_arch_mac)o(h,)485 2670 y(\(enum)g(bfd_architecture)d(arch,)i
-(unsigned)g(long)h(machine\)\);)p 2050 2680 21 42 v 0 2770
-a Fk(c)6 b(y)g(g)g(n)g(u)g(s)36 b(s)6 b(u)g(p)g(p)g(o)g(r)g(t)p
-332 2761 1396 3 v 1421 w(Revision:)17 b(1.5)p eop
-%%Page: 38 40
-bop 0 -58 a Fk(Chapter)13 b(2:)k(BFD)c(front)g(end)p 413 -66
-669 3 v 691 w(DRAFT)p 1224 -66 V 695 w Fj(38)0 183 y Fr(2.10.0.3)29
-b(bfd)p 326 183 19 3 v 22 w(scan)p 463 183 V 23 w(arc)n(h)p
-600 183 V 22 w(mac)n(h)300 275 y Fm(Scan)20 b(a)e(string)i(and)f(attempt)f
-(to)h(turn)g(it)g(in)o(to)g(an)g(arc)o(hiv)o(e)h(and)f(mac)o(hine)300
-324 y(t)o(yp)q(e)c(com)o(bination.)390 374 y Fh(PROTO\(boolean,)22
-b(bfd_scan_arch_mach,)485 424 y(\(CONST)h(char)h(*,)f(enum)h
-(bfd_architecture)d(*,)j(unsigned)390 474 y(long)f(*\)\);)0
-607 y Fr(2.10.0.4)29 b(bfd)p 326 607 V 22 w(arc)n(h)p 462 607
-V 23 w(compatible)300 698 y Fm(This)17 b(routine)h(is)f(used)h(to)e
-(determine)i(whether)f(t)o(w)o(o)f(BFDs')g(arc)o(hitectures)300
-748 y(and)22 b(mac)o(hine)g(t)o(yp)q(es)g(are)f(compatible.)40
-b(It)22 b(calculates)g(the)g(lo)o(w)o(est)f(com-)300 798 y(mon)15
-b(denominator)h(b)q(et)o(w)o(een)g(the)g(t)o(w)o(o)e(arc)o(hitectures)i(and)g
-(mac)o(hine)g(t)o(yp)q(es)300 847 y(implied)22 b(b)o(y)e(the)g(bfds)g(and)g
-(sets)g(the)g(ob)s(jects)f(p)q(oin)o(ted)i(at)e(b)o(y)h Ff(arc)o(hp)h
-Fm(and)300 897 y Ff(mac)o(hine)e Fm(if)c(non)h(NULL.)300 959
-y(This)g(routine)h(returns)i Fh(true)c Fm(if)i(the)f(bfds)g(are)f(of)h
-(compatible)h(t)o(yp)q(e,)e(other-)300 1009 y(wise)h Fh(false)p
-Fm(.)390 1059 y Fh(PROTO\(boolean,)22 b(bfd_arch_compatible,)509
-1109 y(\(bfd)i(*abfd,)509 1159 y(bfd)g(*bbfd,)509 1209 y(enum)g
-(bfd_architecture)d(*archp,)509 1258 y(unsigned)i(long)g(*machinep\)\);)0
-1391 y Fr(2.10.0.5)29 b(bfd)p 326 1391 V 22 w(set)p 424 1391
-V 22 w(arc)n(h)p 560 1391 V 23 w(mac)n(h)300 1483 y Fm(Set)15
-b(atc)o(h)g(mac)o(h)300 1512 y Fg(\013)p 325 1512 1326 2 v
-1325 w(\010)p 300 1761 2 225 v 314 1599 a Fh(#define)23 b
-(bfd_set_arch_mach\(abfd,)e(arch,)i(mach\))g(\\)433 1649 y(BFD_SEND)g
-(\(abfd,)g(_bfd_set_arch_mach,\\)791 1698 y(\(abfd,)g(arch,)h(mach\)\))p
-1677 1761 V 300 1786 a Fg(\012)p 325 1786 1326 2 v 1325 w(\011)0
-2770 y Fk(c)6 b(y)g(g)g(n)g(u)g(s)36 b(s)6 b(u)g(p)g(p)g(o)g(r)g(t)p
-332 2761 1396 3 v 1421 w(Revision:)17 b(1.5)p eop
-%%Page: 39 41
-bop 0 -58 a Fk(Chapter)13 b(2:)k(BFD)c(front)g(end)p 413 -66
-669 3 v 691 w(DRAFT)p 1224 -66 V 695 w Fj(39)0 183 y Fn(2.11)32
-b(Op)r(ening)23 b(and)g(Closing)f(BFDs)0 358 y Fr(2.11.0.1)29
-b(bfd)p 326 358 19 3 v 22 w(op)r(enr)300 451 y Fm(Op)q(ens)22
-b(the)g(\014le)g(supplied)i(\(using)d(fop)q(en\))h(with)g(the)f(target)f
-(supplied,)25 b(it)300 501 y(returns)15 b(a)g(p)q(oin)o(ter)h(to)e(the)h
-(created)h(bfd.)300 564 y(If)h(NULL)h(is)g(returned)g(then)f(an)g(error)f
-(has)h(o)q(ccured.)27 b(P)o(ossible)18 b(errors)e(are)300 614
-y(no)p 351 614 14 2 v 16 w(memory)l(,)f(in)o(v)m(alid)p 681
-614 V 18 w(target)f(or)h(system)p 1025 614 V 16 w(call)h(error.)390
-664 y Fh(PROTO\(bfd*,)22 b(bfd_openr,)h(\(CONST)g(char)g(*filename,CONST)390
-714 y(char*target\)\);)0 860 y Fr(2.11.0.2)29 b(bfd)p 326 860
-19 3 v 22 w(fdop)r(enr)300 952 y Fm(bfd)p 367 952 14 2 v 17
-w(fdop)q(enr)17 b(is)g(to)g(bfd)p 721 952 V 16 w(fop)q(enr)h(m)o(uc)o(h)e
-(lik)o(e)i(fdop)q(en)g(is)f(to)f(fop)q(en.)26 b(It)16 b(op)q(ens)300
-1002 y(a)f(bfd)g(on)h(a)e(\014le)j(already)e(describ)q(ed)i(b)o(y)e(the)h
-Ff(fd)h Fm(supplied.)300 1066 y(P)o(ossible)f(errors)f(are)f(no)p
-730 1066 V 17 w(memory)l(,)g(in)o(v)m(alid)p 1060 1066 V 19
-w(target)g(and)h(system)p 1437 1066 V 16 w(call)i(error.)414
-1116 y Fh(PROTO\(bfd)22 b(*,)i(bfd_fdopenr,)485 1165 y(\(CONST)f(char)h
-(*filename,)e(CONST)h(char)h(*target,)f(int)390 1215 y(fd\)\);)0
-1361 y Fr(2.11.0.3)29 b(bfd)p 326 1361 19 3 v 22 w(op)r(en)n(w)300
-1454 y Fm(Creates)21 b(a)g(bfd,)i(asso)q(ciated)f(with)g(\014le)h
-Ff(\014lename)p Fm(,)h(using)e(the)g(\014le)g(format)300 1504
-y Ff(target)p Fm(,)14 b(and)h(returns)g(a)g(p)q(oin)o(ter)h(to)e(it.)300
-1567 y(P)o(ossible)i(errors)f(are)f(system)p 818 1567 14 2
-v 16 w(call)p 901 1567 V 18 w(error,)g(no)p 1091 1567 V 16
-w(memory)l(,)h(in)o(v)m(alid)p 1421 1567 V 19 w(target.)390
-1617 y Fh(PROTO\(bfd)23 b(*,)g(bfd_openw,)g(\(CONST)g(char)g(*filename,)g
-(CONST)390 1667 y(char)g(*target\)\);)0 1813 y Fr(2.11.0.4)29
-b(bfd)p 326 1813 19 3 v 22 w(close)300 1906 y Fm(This)21 b(function)h(closes)
-f(a)g(bfd.)36 b(If)21 b(the)g(bfd)g(w)o(as)f(op)q(en)h(for)f(writing,)j(then)
-300 1955 y(p)q(ending)13 b(op)q(erations)f(are)f(completed)h(and)g(the)g
-(\014le)g(written)g(out)f(and)g(closed.)300 2005 y(If)18 b(the)f(created)g
-(\014le)i(is)e(executable,)i(then)30 b Fh(chmod)17 b Fm(is)h(called)h(to)d
-(mark)h(it)g(as)300 2055 y(suc)o(h.)300 2119 y(All)f(memory)f(attatc)o(hed)f
-(to)h(the)g(bfd's)g(obstac)o(ks)g(is)g(released.)300 2182 y
-Fh(true)g Fm(is)g(returned)h(if)g(all)g(is)f(ok,)g(otherwise)g
-Fh(false)p Fm(.)390 2232 y Fh(PROTO\(boolean,)22 b(bfd_close,\(bfd)g(*\)\);)0
-2378 y Fr(2.11.0.5)29 b(bfd)p 326 2378 V 22 w(create)300 2471
-y Fm(This)23 b(routine)f(creates)g(a)f(new)i(bfd)f(in)h(the)f(manner)g(of)g
-(bfd)p 1406 2471 14 2 v 16 w(op)q(en)o(w,)i(but)300 2521 y(without)14
-b(op)q(ening)g(a)g(\014le.)20 b(The)14 b(new)g(bfd)g(tak)o(es)f(the)g(target)
-g(from)f(the)i(target)300 2570 y(used)i(b)o(y)f Ff(template)p
-Fm(.)20 b(The)15 b(format)f(is)i(alw)o(a)o(ys)e(set)h(to)g
-Fh(bfd_object)p Fm(.)390 2620 y Fh(PROTO\(bfd)23 b(*,)g(bfd_create,)g
-(\(CONST)g(char)g(*filename,)f(bfd)390 2670 y(*template\)\);)0
-2770 y Fk(c)6 b(y)g(g)g(n)g(u)g(s)36 b(s)6 b(u)g(p)g(p)g(o)g(r)g(t)p
-332 2761 1396 3 v 1421 w(Revision:)17 b(1.5)p eop
-%%Page: 40 42
-bop 0 -58 a Fk(Chapter)13 b(2:)k(BFD)c(front)g(end)p 413 -66
-669 3 v 691 w(DRAFT)p 1224 -66 V 695 w Fj(40)0 183 y Fr(2.11.0.6)29
-b(bfd)p 326 183 19 3 v 22 w(allo)r(c)p 472 183 V 22 w(size)300
-275 y Fm(Return)12 b(the)f(n)o(um)o(b)q(er)h(of)f(b)o(ytes)g(in)h(the)f
-(obstac)o(ks)f(connected)j(to)d(the)i(supplied)300 324 y(bfd.)390
-374 y Fh(PROTO\(bfd_size_type,bfd_al)o(loc_siz)o(e,\(bfd)21
-b(*abfd\)\);)0 2770 y Fk(c)6 b(y)g(g)g(n)g(u)g(s)36 b(s)6 b(u)g(p)g(p)g(o)g
-(r)g(t)p 332 2761 1396 3 v 1421 w(Revision:)17 b(1.5)p eop
-%%Page: 41 43
-bop 0 -58 a Fk(Chapter)13 b(2:)k(BFD)c(front)g(end)p 413 -66
-669 3 v 691 w(DRAFT)p 1224 -66 V 695 w Fj(41)0 183 y Fr(2.11.1.7)29
-b(bfd)p 326 183 19 3 v 22 w(put)p 440 183 V 22 w(size)0 497
-y(2.11.1.8)g(bfd)p 326 497 V 22 w(get)p 431 497 V 22 w(size)300
-605 y Fm(These)17 b(macros)f(as)g(used)i(for)e(reading)h(and)g(writing)g(ra)o
-(w)f(data)g(in)i(sections;)300 655 y(eac)o(h)e(access)f(\(except)h(for)e(b)o
-(ytes\))h(is)h(v)o(ectored)f(through)h(the)f(target)f(format)300
-705 y(of)21 b(the)g(bfd)g(and)g(mangled)h(accordingly)l(.)39
-b(The)21 b(mangling)h(p)q(erforms)e(an)o(y)300 754 y(necessary)15
-b(endian)i(translations)e(and)g(remo)o(v)o(es)g(alignmen)o(t)h(restrictions.)
-300 793 y Fg(\013)p 325 793 1326 2 v 1325 w(\010)p 300 1689
-2 872 v 314 879 a Fh(#define)23 b(bfd_put_8\(abfd,)f(val,)h(ptr\))g(\\)696
-929 y(\(*\(\(char)g(*\)ptr\))g(=)g(\(char\)val\))314 979 y(#define)g
-(bfd_get_8\(abfd,)f(ptr\))h(\\)696 1029 y(\(*\(\(char)g(*\)ptr\)\))314
-1079 y(#define)g(bfd_put_16\(abfd,)f(val,)h(ptr\))g(\\)696
-1129 y(BFD_SEND\(abfd,)f(bfd_putx16,)g(\(val,ptr\)\))314 1178
-y(#define)h(bfd_get_16\(abfd,)f(ptr\))h(\\)696 1228 y(BFD_SEND\(abfd,)f
-(bfd_getx16,)g(\(ptr\)\))314 1278 y(#define)h(bfd_put_32\(abfd,)f(val,)h
-(ptr\))g(\\)696 1328 y(BFD_SEND\(abfd,)f(bfd_putx32,)g(\(val,ptr\)\))314
-1378 y(#define)h(bfd_get_32\(abfd,)f(ptr\))h(\\)696 1427 y(BFD_SEND\(abfd,)f
-(bfd_getx32,)g(\(ptr\)\))314 1477 y(#define)h(bfd_put_64\(abfd,)f(val,)h
-(ptr\))g(\\)696 1527 y(BFD_SEND\(abfd,)f(bfd_putx64,)g(\(val,)h(ptr\)\))314
-1577 y(#define)g(bfd_get_64\(abfd,)f(ptr\))h(\\)696 1627 y(BFD_SEND\(abfd,)f
-(bfd_getx64,)g(\(ptr\)\))p 1677 1689 V 300 1715 a Fg(\012)p
-325 1715 1326 2 v 1325 w(\011)0 2049 y Fr(2.11.1.9)29 b(bfd)p
-326 2049 19 3 v 22 w(h)p 382 2049 V 22 w(put)p 496 2049 V 23
-w(size)0 2363 y(2.11.1.10)g(bfd)p 357 2363 V 22 w(h)p 413 2363
-V 22 w(get)p 518 2363 V 22 w(size)300 2471 y Fm(These)16 b(macros)e(ha)o(v)o
-(e)h(the)g(same)g(function)h(as)f(their)g Fh(bfd_get_x)f Fm(bretherin,)300
-2521 y(except)19 b(that)f(they)h(are)f(used)h(for)f(remo)o(ving)h
-(information)g(for)f(the)h(header)300 2570 y(records)c(of)g(ob)s(ject)g
-(\014les.)22 b(Believ)o(e)17 b(it)f(or)f(not,)g(some)g(ob)s(ject)g(\014les)i
-(k)o(eep)e(their)300 2620 y(header)21 b(records)f(in)h(big)g(endian)h(order,)
-f(and)g(their)g(data)e(in)j(little)f(endan)300 2670 y(order.)0
-2770 y Fk(c)6 b(y)g(g)g(n)g(u)g(s)36 b(s)6 b(u)g(p)g(p)g(o)g(r)g(t)p
-332 2761 1396 3 v 1421 w(Revision:)17 b(1.5)p eop
-%%Page: 42 44
-bop 0 -58 a Fk(Chapter)13 b(2:)k(BFD)c(front)g(end)p 413 -66
-669 3 v 691 w(DRAFT)p 1224 -66 V 695 w Fj(42)300 26 y Fg(\013)p
-325 26 1326 2 v 1325 w(\010)p 300 922 2 872 v 314 112 a Fh(#define)23
-b(bfd_h_put_8\(abfd,)f(val,)h(ptr\))g(\\)696 162 y(\(*\(\(char)g(*\)ptr\))g
-(=)g(\(char\)val\))314 212 y(#define)g(bfd_h_get_8\(abfd,)f(ptr\))h(\\)696
-262 y(\(*\(\(char)g(*\)ptr\)\))314 311 y(#define)g(bfd_h_put_16\(abfd,)e
-(val,)j(ptr\))f(\\)696 361 y(BFD_SEND\(abfd,)f(bfd_h_putx16,\(val,ptr\)\))314
-411 y(#define)h(bfd_h_get_16\(abfd,)e(ptr\))j(\\)696 461 y(BFD_SEND\(abfd,)e
-(bfd_h_getx16,\(ptr\)\))314 511 y(#define)h(bfd_h_put_32\(abfd,)e(val,)j
-(ptr\))f(\\)696 560 y(BFD_SEND\(abfd,)f(bfd_h_putx32,\(val,ptr\)\))314
-610 y(#define)h(bfd_h_get_32\(abfd,)e(ptr\))j(\\)696 660 y(BFD_SEND\(abfd,)e
-(bfd_h_getx32,\(ptr\)\))314 710 y(#define)h(bfd_h_put_64\(abfd,)e(val,)j
-(ptr\))f(\\)696 760 y(BFD_SEND\(abfd,)f(bfd_h_putx64,\(val,)f(ptr\)\))314
-809 y(#define)i(bfd_h_get_64\(abfd,)e(ptr\))j(\\)696 859 y(BFD_SEND\(abfd,)e
-(bfd_h_getx64,\(ptr\)\))p 1677 922 V 300 947 a Fg(\012)p 325
-947 1326 2 v 1325 w(\011)0 1130 y Fr(2.11.1.11)29 b(bfd)p 357
-1130 19 3 v 22 w(log2)300 1221 y Fm(Return)17 b(the)g(log)f(base)h(2)f(of)g
-(the)h(v)m(alue)h(supplied,)g(rounded)g(up.)24 b(eg)16 b(an)h(arg)300
-1271 y(of)e(1025)f(w)o(ould)h(return)h(11.)390 1321 y Fh(PROTO\(bfd_vma,)22
-b(bfd_log2,\(bfd_vma)f(x\)\);)0 2770 y Fk(c)6 b(y)g(g)g(n)g(u)g(s)36
-b(s)6 b(u)g(p)g(p)g(o)g(r)g(t)p 332 2761 1396 3 v 1421 w(Revision:)17
-b(1.5)p eop
-%%Page: 43 45
-bop 0 -58 a Fk(Chapter)13 b(2:)k(BFD)c(front)g(end)p 413 -66
-669 3 v 691 w(DRAFT)p 1224 -66 V 695 w Fj(43)0 183 y Fn(2.12)32
-b(File)24 b(Cac)n(hing)300 276 y Fm(The)14 b(\014le)h(cac)o(hing)f(mec)o
-(hanism)h(is)f(em)o(b)q(edded)h(within)h(BFD)d(and)h(allo)o(ws)g(the)300
-326 y(application)k(to)e(op)q(en)g(as)g(man)o(y)g(bfds)h(as)f(it)g(w)o(an)o
-(ts)f(without)h(regard)g(to)g(the)300 376 y(underlying)21 b(op)q(erating)e
-(system's)f(\014le)i(descriptor)f(limit)i(\(often)d(as)h(lo)o(w)f(as)300
-425 y(20)d(op)q(en)g(\014les\).)300 489 y(The)33 b(mo)q(dule)h(in)140
-b Fh(cache.c)32 b Fm(main)o(tains)h(a)g(least)g(recen)o(tly)g(used)300
-539 y(list)f(of)124 b Fh(BFD_CACHE_MAX_OPEN)29 b Fm(\014les,)35
-b(and)c(exp)q(orts)g(the)g(name)300 589 y Fh(bfd_cache_lookup)24
-b Fm(whic)o(h)i(runs)g(around)g(and)g(mak)o(es)f(sure)h(that)f(the)300
-638 y(required)18 b(bfd)f(is)g(op)q(en.)25 b(If)17 b(not,)f(then)h(it)g(c)o
-(ho)q(oses)f(a)h(\014le)g(to)f(close,)h(closes)h(it)300 688
-y(and)d(op)q(ens)h(the)f(one)h(w)o(an)o(ted,)e(returning)i(its)f(\014le)h
-(handle.)0 833 y Fr(2.12.0.1)29 b(BFD)p 369 833 19 3 v 22 w(CA)n(CHE)p
-611 833 V 23 w(MAX)p 784 833 V 23 w(OPEN)300 926 y Fm(The)19
-b(maxium)o(um)g(n)o(um)o(b)q(er)g(of)g(\014les)h(whic)o(h)f(the)g(cac)o(he)g
-(will)i(k)o(eep)e(op)q(en)h(at)300 976 y(one)15 b(time.)300
-1005 y Fg(\013)p 325 1005 1326 2 v 1325 w(\010)p 300 1154 2
-125 v 314 1092 a Fh(#define)23 b(BFD_CACHE_MAX_OPEN)e(10)p
-1677 1154 V 300 1180 a Fg(\012)p 325 1180 1326 2 v 1325 w(\011)0
-1375 y Fr(2.12.0.2)29 b(bfd)p 326 1375 19 3 v 22 w(last)p 443
-1375 V 22 w(cac)n(he)300 1467 y Fm(Zero,)15 b(or)h(a)f(p)q(oin)o(ter)i(to)e
-(the)h(topmost)f(bfd)h(on)g(the)g(c)o(hain.)23 b(This)17 b(is)f(used)h(b)o(y)
-300 1517 y(the)h(bfd)p 448 1517 14 2 v 17 w(cac)o(he)p 572
-1517 V 17 w(lo)q(okup\(\))g(macro)f(in)i(libbfd.h)h(to)d(determine)i(when)g
-(it)f(can)300 1567 y(a)o(v)o(oid)d(a)g(function)h(call.)300
-1597 y Fg(\013)p 325 1597 1326 2 v 1325 w(\010)p 300 1745 2
-125 v 314 1683 a Fh(extern)23 b(bfd)h(*bfd_last_cache;)p 1677
-1745 V 300 1771 a Fg(\012)p 325 1771 1326 2 v 1325 w(\011)0
-1966 y Fr(2.12.0.3)29 b(bfd)p 326 1966 19 3 v 22 w(cac)n(he)p
-492 1966 V 23 w(lo)r(okup)300 2058 y Fm(Chec)o(ks)11 b(to)g(see)h(if)f(the)h
-(required)g(bfd)g(is)g(the)f(same)g(as)g(the)g(last)h(one)f(lo)q(ok)o(ed)h
-(up.)300 2108 y(If)17 b(so)e(then)i(it)g(can)f(use)h(the)f(iostream)g(in)h
-(the)f(bfd)h(with)g(impunit)o(y)l(,)g(since)h(it)300 2158 y(can't)13
-b(ha)o(v)o(e)f(c)o(hanged)i(since)g(the)f(last)g(lo)q(okup,)h(otherwise)f(it)
-h(has)f(to)f(p)q(erform)300 2208 y(the)j(complicated)i(lo)q(okup)f(function)
-300 2247 y Fg(\013)p 325 2247 1326 2 v 1325 w(\010)p 300 2594
-2 324 v 314 2333 a Fh(#define)23 b(bfd_cache_lookup\(x\))e(\\)433
-2383 y(\(\(x\)==bfd_last_cache?)g(\\)505 2433 y
-(\(FILE*\)\(bfd_last_cache->io)o(stream\):)f(\\)529 2482 y
-(bfd_cache_lookup_worker\(x)o(\)\))p 1677 2594 V 300 2620 a
-Fg(\012)p 325 2620 1326 2 v 1325 w(\011)0 2770 y Fk(c)6 b(y)g(g)g(n)g(u)g(s)
-36 b(s)6 b(u)g(p)g(p)g(o)g(r)g(t)p 332 2761 1396 3 v 1421 w(Revision:)17
-b(1.5)p eop
-%%Page: 44 46
-bop 0 -58 a Fk(Chapter)13 b(2:)k(BFD)c(front)g(end)p 413 -66
-669 3 v 691 w(DRAFT)p 1224 -66 V 695 w Fj(44)0 183 y Fr(2.12.0.4)29
-b(bfd)p 326 183 19 3 v 22 w(cac)n(he)p 492 183 V 23 w(init)300
-275 y Fm(Initialize)18 b(a)d(BFD)g(b)o(y)g(putting)h(it)f(on)g(the)g(cac)o
-(he)h(LR)o(U.)390 324 y Fh(PROTO\(void,)22 b(bfd_cache_init,)g(\(bfd)h
-(*\)\);)0 457 y Fr(2.12.0.5)29 b(bfd)p 326 457 V 22 w(cac)n(he)p
-492 457 V 23 w(close)300 549 y Fm(Remo)o(v)o(e)18 b(the)g(bfd)g(from)f(the)h
-(cac)o(he.)28 b(If)18 b(the)g(attatc)o(hed)f(\014le)i(is)g(op)q(en,)g(then)
-300 598 y(close)d(it)f(to)q(o.)390 648 y Fh(PROTO\(void,)22
-b(bfd_cache_close,)g(\(bfd)h(*\)\);)0 781 y Fr(2.12.0.6)29
-b(bfd)p 326 781 V 22 w(op)r(en)p 477 781 V 22 w(\014le)300
-872 y Fm(Call)13 b(the)f(OS)g(to)f(op)q(en)i(a)f(\014le)h(for)e(this)h(BFD.)f
-(Returns)i(the)f(FILE)g(*)g(\(p)q(ossibly)300 922 y(n)o(ull\))g(that)f
-(results)h(from)e(this)i(op)q(eration.)19 b(Sets)11 b(up)h(the)f(BFD)g(so)g
-(that)g(future)300 972 y(accesses)18 b(kno)o(w)e(the)i(\014le)g(is)g(op)q
-(en.)26 b(If)18 b(the)f(FILE)h(*)e(returned)i(is)g(n)o(ull,)h(then)300
-1022 y(there)h(is)h(w)o(on't)d(ha)o(v)o(e)i(b)q(een)h(put)f(in)h(the)f(cac)o
-(he,)h(so)e(it)i(w)o(on't)d(ha)o(v)o(e)i(to)f(b)q(e)300 1072
-y(remo)o(v)o(ed)c(from)f(it.)390 1121 y Fh(PROTO\(FILE)22 b(*,)i
-(bfd_open_file,)e(\(bfd)h(*\)\);)0 1254 y Fr(2.12.0.7)29 b(bfd)p
-326 1254 V 22 w(cac)n(he)p 492 1254 V 23 w(lo)r(okup)p 696
-1254 V 22 w(w)n(ork)n(er)300 1346 y Fm(Called)23 b(when)f(the)f(macro)59
-b Fh(bfd_cache_lookup)19 b Fm(fails)j(to)f(\014nd)h(a)f(quic)o(k)300
-1395 y(answ)o(er.)31 b(Finds)20 b(a)f(\014le)i(descriptor)e(for)g(this)h
-(BFD.)e(If)i(necessary)l(,)g(it)f(op)q(en)300 1445 y(it.)28
-b(If)19 b(there)f(are)f(already)h(more)g(than)g(BFD)p 1106
-1445 14 2 v 16 w(CA)o(CHE)p 1286 1445 V 16 w(MAX)p 1412 1445
-V 16 w(OPEN)g(\014les)300 1495 y(op)q(en,)13 b(it)f(trys)f(to)g(close)h(one)g
-(\014rst,)g(to)f(a)o(v)o(oid)h(running)g(out)g(of)f(\014le)i(descriptors.)390
-1545 y Fh(PROTO\(FILE)22 b(*,)i(bfd_cache_lookup_worker,)d(\(bfd)i(*\)\);)0
-2770 y Fk(c)6 b(y)g(g)g(n)g(u)g(s)36 b(s)6 b(u)g(p)g(p)g(o)g(r)g(t)p
-332 2761 1396 3 v 1421 w(Revision:)17 b(1.5)p eop
-%%Page: 45 47
-bop 0 -58 a Fk(Chapter)13 b(3:)k(BFD)c(back)f(end)p 409 -66
-670 3 v 693 w(DRAFT)p 1222 -66 V 697 w Fj(45)0 183 y Fi(3)41
-b(BFD)27 b(bac)n(k)f(end)300 295 y Fm(All)16 b(of)f(bfd)h(liv)o(es)g(in)g
-(one)f(directory)l(.)0 2770 y Fk(c)6 b(y)g(g)g(n)g(u)g(s)36
-b(s)6 b(u)g(p)g(p)g(o)g(r)g(t)p 332 2761 1396 3 v 1421 w(Revision:)17
-b(1.5)p eop
-%%Page: 46 48
-bop 0 -58 a Fk(Chapter)13 b(3:)k(BFD)c(back)f(end)p 409 -66
-670 3 v 693 w(DRAFT)p 1222 -66 V 697 w Fj(46)0 183 y Fn(3.1)33
-b(a.out)21 b(bac)n(k)n(ends)300 278 y Fm(BFD)13 b(supp)q(orts)g(a)g(n)o(um)o
-(b)q(er)h(of)f(di\013eren)o(t)g(\015a)o(v)o(ours)g(of)g(a.out)f(format,)g
-(though)300 328 y(the)h(ma)s(jor)e(di\013erences)j(are)f(only)g(the)g(sizes)h
-(of)f(the)g(structures)f(on)h(disk,)h(and)300 378 y(the)h(shap)q(e)h(of)f
-(the)g(relo)q(cation)h(information.)300 444 y(The)f(supp)q(ort)f(is)h(split)h
-(in)o(to)e(a)g(basic)h(supp)q(ort)g(\014le)g Fh(aoutx.h)e Fm(and)i(other)f
-(\014les)300 494 y(whic)o(h)e(deriv)o(e)h(functions)f(from)f(the)h(base.)18
-b(One)13 b(deriv)m(ation)f(\014le)h(is)f Fh(aoutf1.h)300 544
-y Fm(\(for)k(a.out)g(\015a)o(v)o(our)g(1\),)h(and)g(adds)g(to)f(the)h(basic)h
-(a.out)e(functions)i(supp)q(ort)300 593 y(for)12 b(sun3,)h(sun4,)f(386)g(and)
-h(29k)e(a.out)h(\014les,)i(to)d(create)i(a)f(target)f(jump)i(v)o(ector)300
-643 y(for)i(a)f(sp)q(eci\014c)k(target.)300 709 y(This)e(information)g(is)h
-(further)e(split)i(out)f(in)o(to)g(more)f(sp)q(eci\014c)j(\014les)f(for)e
-(eac)o(h)300 759 y(mac)o(hine,)j(including)30 b Fh(sunos.c)16
-b Fm(-)h(for)f(sun3)h(and)g(sun4)g(and)28 b Fh(demo64)16 b
-Fm(for)g(a)300 809 y(demonstration)f(of)g(a)g(64)f(bit)i(a.out)e(format.)300
-875 y(The)k(base)g(\014le)34 b Fh(aoutx.h)16 b Fm(de\014nes)j(general)f(mec)o
-(hanisms)g(for)g(reading)g(and)300 925 y(writing)f(records)g(to)f(and)h(from)
-f(disk,)i(and)f(v)m(arious)g(other)f(metho)q(ds)h(whic)o(h)300
-975 y(bfd)f(requires.)23 b(It)15 b(is)i(included)h(b)o(y)i
-Fh(aout32.c)14 b Fm(and)20 b Fh(aout64.c)15 b Fm(to)g(form)g(the)300
-1024 y(names)31 b(aout)p 547 1024 14 2 v 16 w(32)p 609 1024
-V 16 w(sw)o(ap)p 723 1024 V 16 w(exec)p 823 1024 V 17 w(header)p
-971 1024 V 16 w(in,)36 b(aout)p 1162 1024 V 16 w(64)p 1224
-1024 V 16 w(sw)o(ap)p 1338 1024 V 16 w(exec)p 1438 1024 V 17
-w(header)p 1586 1024 V 16 w(in,)300 1074 y(etc.)300 1140 y(As)13
-b(an)f(example,)i(this)f(is)g(what)f(go)q(es)h(on)f(to)g(mak)o(e)g(the)h(bac)
-o(k)g(end)g(for)f(a)g(sun4,)300 1190 y(from)i(aout32.c)462
-1240 y Fh(#define)22 b(ARCH_SIZE)h(32)462 1290 y(#include)f("aoutx.h")390
-1356 y Fm(Whic)o(h)16 b(exp)q(orts)f(names:)115 b Fh(...)462
-1406 y(aout_32_canonicalize_re)o(loc)462 1455 y(aout_32_find_nearest_li)o(ne)
-462 1505 y(aout_32_get_lineno)462 1555 y(aout_32_get_reloc_upper)o(_bound)509
-1605 y(...)300 1671 y Fm(from)14 b(sunos.c)485 1721 y Fh(#define)23
-b(ARCH)h(32)485 1771 y(#define)f(TARGET_NAME)g("a.out-sunos-big")485
-1820 y(#define)g(VECNAME)95 b(sunos_big_vec)485 1870 y(#include)23
-b("aoutf1.h")300 1936 y Fm(requires)16 b(all)g(the)f(names)h(from)e
-(aout32.c,)f(and)j(pro)q(duces)g(the)f(jump)h(v)o(ector)485
-1986 y Fh(sunos_big_vec)0 2153 y Fr(3.1.1)30 b(relo)r(cations)300
-2248 y Fm(The)17 b(\014le)29 b Fh(aoutx.h)16 b Fm(caters)h(for)f(b)q(oth)h
-(the)g Ff(standard)i Fm(and)e Ff(extended)j Fm(forms)300 2298
-y(of)15 b(a.out)f(relo)q(cation)i(records.)300 2364 y(The)21
-b(standard)f(records)h(are)f(c)o(haracterised)h(b)o(y)g(con)o(taining)g(only)
-g(an)g(ad-)300 2414 y(dress,)16 b(a)g(sym)o(b)q(ol)g(index)i(and)e(a)g(t)o
-(yp)q(e)g(\014eld.)24 b(The)17 b(extended)g(records)f(\(used)300
-2463 y(on)f(29ks)g(and)g(sparcs\))g(also)g(ha)o(v)o(e)g(a)g(full)h(in)o
-(teger)f(for)g(an)g(addend.)0 2630 y Fr(3.1.2)30 b(In)n(ternal)20
-b(En)n(try)i(P)n(oin)n(ts)0 2770 y Fk(c)6 b(y)g(g)g(n)g(u)g(s)36
-b(s)6 b(u)g(p)g(p)g(o)g(r)g(t)p 332 2761 1396 3 v 1421 w(Revision:)17
-b(1.5)p eop
-%%Page: 47 49
-bop 0 -58 a Fk(Chapter)13 b(3:)k(BFD)c(back)f(end)p 409 -66
-670 3 v 693 w(DRAFT)p 1222 -66 V 697 w Fj(47)324 183 y Fh(aoutx.h)18
-b Fm(exp)q(orts)h(sev)o(eral)g(routines)h(for)f(accessing)g(the)h(con)o(ten)o
-(ts)e(of)h(an)300 233 y(a.out)12 b(\014le,)h(whic)o(h)h(are)e(gathered)g(and)
-h(exp)q(orted)g(in)g(turn)g(b)o(y)f(v)m(arious)h(format)300
-283 y(sp)q(eci\014c)k(\014les)f(\(eg)f(sunos.c\).)0 417 y Fr(3.1.2.1)30
-b(aout)p 328 417 19 3 v 21 w Fo(<)p Fr(size)p Fo(>)p 501 417
-V 23 w Fr(sw)n(ap)p 654 417 V 23 w(exec)p 792 417 V 22 w(header)p
-993 417 V 23 w(in)300 509 y Fm(Sw)o(aps)11 b(the)h(information)f(in)i(an)e
-(executable)i(header)f(tak)o(en)f(from)f(a)i(ra)o(w)e(b)o(yte)300
-559 y(stream)k(memory)h(image,)g(in)o(to)g(the)g(in)o(ternal)h(exec)p
-1194 559 14 2 v 17 w(header)g(structure.)390 608 y Fh(PROTO\(void,)22
-b(aout_<size>_swap_exec_header_)o(in,)533 658 y(\(bfd)h(*abfd,)533
-708 y(struct)g(external_exec)f(*raw_bytes,)533 758 y(struct)h(internal_exec)f
-(*execp\)\);)0 892 y Fr(3.1.2.2)30 b(aout)p 328 892 19 3 v
-21 w Fo(<)p Fr(size)p Fo(>)p 501 892 V 23 w Fr(sw)n(ap)p 654
-892 V 23 w(exec)p 792 892 V 22 w(header)p 993 892 V 23 w(out)300
-984 y Fm(Sw)o(aps)16 b(the)f(information)i(in)f(an)g(in)o(ternal)h(exec)f
-(header)g(structure)g(in)o(to)g(the)300 1033 y(supplied)i(bu\013er)d(ready)g
-(for)f(writing)i(to)f(disk.)390 1083 y Fh(PROTO\(void,)22 b
-(aout_<size>_swap_exec_header_)o(out,)438 1133 y(\(bfd)h(*abfd,)462
-1183 y(struct)g(internal_exec)f(*execp,)462 1233 y(struct)h(external_exec)f
-(*raw_bytes\)\);)0 1367 y Fr(3.1.2.3)30 b(aout)p 328 1367 V
-21 w Fo(<)p Fr(size)p Fo(>)p 501 1367 V 23 w Fr(some)p 658
-1367 V 22 w(aout)p 799 1367 V 22 w(ob)s(ject)p 987 1367 V 22
-w(p)300 1459 y Fm(Some)11 b(A.OUT)f(v)m(arian)o(t)h(thinks)g(that)f(the)h
-(\014le)h(whose)f(format)e(w)o(e're)h(c)o(hec)o(king)300 1508
-y(is)18 b(an)f(a.out)g(\014le.)28 b(Do)17 b(some)g(more)g(c)o(hec)o(king,)h
-(and)g(set)f(up)h(for)f(access)h(if)g(it)300 1558 y(really)f(is.)k(Call)16
-b(bac)o(k)g(to)f(the)g(calling)j(en)o(vironmen)o(ts)e Fh(")p
-Fm(\014nish)g(up)p Fh(")g Fm(function)300 1608 y(just)f(b)q(efore)g
-(returning,)h(to)e(handle)j(an)o(y)e(last-min)o(ute)h(setup.)390
-1658 y Fh(PROTO\(bfd_target)22 b(*,)h(aout_<size>_some_aout_object)o(_p,)414
-1708 y(\(bfd)g(*abfd,)438 1757 y(bfd_target)f(*\(*callback_to_real_object_p)o
-(\)\(\)\)\);)0 1892 y Fr(3.1.2.4)30 b(aout)p 328 1892 V 21
-w Fo(<)p Fr(size)p Fo(>)p 501 1892 V 23 w Fr(mk)n(ob)s(ject)300
-1983 y Fm(This)16 b(routine)f(initialize)q(s)j(a)d(bfd)g(for)g(use)g(with)h
-(a.out)e(\014les.)390 2033 y Fh(PROTO\(boolean,)22 b(aout_<size>_mkobject,)f
-(\(bfd)i(*\)\);)0 2167 y Fr(3.1.2.5)30 b(aout)p 328 2167 V
-21 w Fo(<)p Fr(size)p Fo(>)p 501 2167 V 23 w Fr(mac)n(hine)p
-743 2167 V 23 w(t)n(yp)r(e)300 2259 y Fm(Keep)22 b(trac)o(k)e(of)h(mac)o
-(hine)h(arc)o(hitecture)g(and)f(mac)o(hine)h(t)o(yp)q(e)f(for)g(a.out's.)300
-2309 y(Return)39 b(the)f(mac)o(hine)p 744 2309 14 2 v 17 w(t)o(yp)q(e)h(for)e
-(a)h(particular)h(arc)o(h&mac)o(hine,)44 b(or)300 2358 y(M)p
-345 2358 V 16 w(UNKNO)o(WN)25 b(if)g(that)e(exact)h(arc)o(h&mac)o(hine)i
-(can't)d(b)q(e)i(represen)o(ted)300 2408 y(in)16 b(a.out)e(format.)300
-2471 y(If)20 b(the)g(arc)o(hitecture)g(is)h(understo)q(o)q(d,)g(mac)o(hine)g
-(t)o(yp)q(e)f(0)f(\(default\))h(should)300 2521 y(alw)o(a)o(ys)14
-b(b)q(e)i(understo)q(o)q(d.)390 2570 y Fh(PROTO\(enum)22 b(machine_type,)h
-(aout_<size>_machine_typ)o(e,)414 2620 y(\(enum)g(bfd_architecture)f(arch,)
-438 2670 y(unsigned)g(long)i(machine\)\);)0 2770 y Fk(c)6 b(y)g(g)g(n)g(u)g
-(s)36 b(s)6 b(u)g(p)g(p)g(o)g(r)g(t)p 332 2761 1396 3 v 1421
-w(Revision:)17 b(1.5)p eop
-%%Page: 48 50
-bop 0 -58 a Fk(Chapter)13 b(3:)k(BFD)c(back)f(end)p 409 -66
-670 3 v 693 w(DRAFT)p 1222 -66 V 697 w Fj(48)0 183 y Fr(3.1.2.6)30
-b(aout)p 328 183 19 3 v 21 w Fo(<)p Fr(size)p Fo(>)p 501 183
-V 23 w Fr(set)p 600 183 V 22 w(arc)n(h)p 736 183 V 23 w(mac)n(h)300
-275 y Fm(Sets)13 b(the)h(arc)o(hitecture)f(and)g(the)h(mac)o(hine)g(of)f(the)
-g(bfd)h(to)e(those)h(v)m(alues)h(sup-)300 324 y(plied.)21 b(V)l(eri\014es)14
-b(that)e(the)h(format)e(can)i(supp)q(ort)g(the)g(arc)o(hitecture)g(required.)
-390 374 y Fh(PROTO\(boolean,)22 b(aout_<size>_set_arch_mach,)414
-424 y(\(bfd)h(*,)438 474 y(enum)g(bfd_architecture,)438 524
-y(unsigned)f(long)i(machine\)\);)0 656 y Fr(3.1.2.7)30 b(aout)p
-328 656 V 21 w Fo(<)p Fr(size)p Fo(>)p Fr(new)p 607 656 V 23
-w(section)p 815 656 V 23 w(ho)r(ok)300 748 y Fm(Called)16 b(b)o(y)g(the)f
-(bfd)g(in)h(resp)q(onse)g(to)f(a)g Fh(bfd_make_section)e Fm(request.)390
-798 y Fh(PROTO\(boolean,)22 b(aout_<size>_new_section_ho)o(ok,)605
-847 y(\(bfd)h(*abfd,)438 897 y(asection)f(*newsect\)\);)0 2770
-y Fk(c)6 b(y)g(g)g(n)g(u)g(s)36 b(s)6 b(u)g(p)g(p)g(o)g(r)g(t)p
-332 2761 1396 3 v 1421 w(Revision:)17 b(1.5)p eop
-%%Page: 49 51
-bop 0 -58 a Fk(Chapter)13 b(3:)k(BFD)c(back)f(end)p 409 -66
-670 3 v 693 w(DRAFT)p 1222 -66 V 697 w Fj(49)0 183 y Fn(3.2)33
-b(co\013)22 b(bac)n(k)n(ends)300 275 y Fm(BFD)e(supp)q(orts)h(a)g(n)o(um)o(b)
-q(er)g(of)g(di\013eren)o(t)g(\015a)o(v)o(ours)f(of)h(co\013)f(format.)36
-b(The)300 325 y(ma)s(jor)20 b(di\013erence)k(b)q(et)o(w)o(een)e(formats)e
-(are)i(the)g(sizes)h(and)f(alignmen)o(ts)g(of)300 375 y(\014elds)16
-b(in)g(structures)f(on)g(disk,)h(and)f(the)h(o)q(ccasional)g(extra)e
-(\014eld.)300 438 y(Co\013)i(in)h(all)h(its)f(v)m(arieties)h(is)f(implimen)o
-(ted)i(with)e(a)f(few)h(common)f(\014les)i(and)300 488 y(a)j(n)o(um)o(b)q(er)
-h(of)e(implemen)o(tation)j(sp)q(eci\014c)g(\014les.)39 b(F)l(or)21
-b(example,)i(The)f(88k)300 538 y(b)q(cs)d(co\013)g(format)e(is)j(implemen)o
-(ted)g(in)g(the)f(\014le)42 b Fh(m88k-bcs.c)p Fm(.)30 b(This)19
-b(\014le)300 588 y Fh(#include)p Fm(s)29 b Fh(m88k-bcs.h)15
-b Fm(whic)o(h)k(de\014nes)f(the)f(external)h(structure)f(of)g(the)300
-637 y(co\013)k(format)f(for)g(the)i(88k,)f(and)58 b Fh(internalcoff.h)19
-b Fm(whic)o(h)k(de\014nes)f(the)300 687 y(in)o(ternal)f(structure.)68
-b Fh(m88k-bcs.c)19 b Fm(also)h(de\014nes)i(the)e(relo)q(cations)h(used)300
-737 y(b)o(y)16 b(the)h(88k)e(format)g(See)i(Section)g(2.7)f([Relo)q
-(cations],)g(page)h(28.)22 b(Then)17 b(the)300 787 y(ma)s(jor)f(p)q(ortion)i
-(of)f(co\013)g(co)q(de)h(is)g(included)i(\()14 b Fh(coffcode.h)p
-Fm(\))i(whic)o(h)i(de\014nes)300 837 y(the)d(metho)q(ds)h(used)g(to)f(act)g
-(up)q(on)h(the)f(t)o(yp)q(es)h(de\014ned)g(in)i Fh(m88k-bcs.h)c
-Fm(and)300 886 y Fh(internalcoff.h)p Fm(.)300 950 y(The)j(In)o(tel)g(i960)f
-(pro)q(cessor)g(v)o(ersion)g(of)g(co\013)g(is)h(implemen)o(ted)h(in)23
-b Fh(icoff.c)p Fm(.)300 999 y(This)g(\014le)g(has)f(the)g(same)f(structure)h
-(as)63 b Fh(m88k-bcs.c)p Fm(,)22 b(except)g(that)g(it)300 1049
-y(includes)17 b Fh(intel-coff.h)d Fm(rather)h(than)g Fh(m88k-bcs.h)p
-Fm(.)0 1190 y Fr(3.2.1)30 b(P)n(orting)20 b(T)-5 b(o)20 b(A)g(New)h(V)-5
-b(ersion)21 b(of)f(Co\013)300 1282 y Fm(The)14 b(recommended)g(metho)q(d)g
-(is)g(to)f(select)h(from)f(the)h(existing)g(implimen)o(ta-)300
-1332 y(tions)d(the)g(v)o(ersion)h(of)e(co\013)h(whic)o(h)h(is)g(most)e(lik)o
-(e)i(the)f(one)g(y)o(ou)g(w)o(an)o(t)f(to)h(use,)h(for)300
-1381 y(our)j(purp)q(oses,)h(w)o(e'll)g(sa)o(y)f(that)g(i386)g(co\013)g(is)h
-(the)f(one)h(y)o(ou)f(select,)h(and)g(that)300 1431 y(y)o(our)f(co\013)g
-(\015a)o(v)o(our)g(is)h(called)h(fo)q(o.)k(Cop)o(y)15 b(the)j
-Fh(i386coff.c)c Fm(to)k Fh(foocoff.c)p Fm(,)300 1481 y(cop)o(y)k
-Fh(../include/i386coff.h)14 b Fm(to)22 b Fh(../include/foocoff.h)13
-b Fm(and)k(add)300 1531 y(the)d(lines)i(to)d Fh(targets.c)g
-Fm(and)i Fh(Makefile.in)d Fm(so)i(that)f(y)o(our)h(new)g(bac)o(k)g(end)300
-1581 y(is)i(used.)300 1644 y(Alter)d(the)h(shap)q(es)f(of)g(the)g(structures)
-g(in)h Fh(../include/foocoff.h)c Fm(so)j(that)300 1694 y(they)21
-b(matc)o(h)f(what)g(y)o(ou)g(need.)38 b(Y)l(ou)21 b(will)h(probably)f(also)g
-(ha)o(v)o(e)f(to)g(add)300 1743 y Fh(#ifdef)p Fm(s)d(to)h(the)g(co)q(de)g(in)
-37 b Fh(internalcoff.h)16 b Fm(and)35 b Fh(coffcode.h)17 b
-Fm(if)h(y)o(our)300 1793 y(v)o(ersion)d(of)g(co\013)g(is)g(to)q(o)g(wild.)300
-1856 y(Y)l(ou)21 b(can)f(v)o(erify)h(that)f(y)o(our)g(new)h(bfd)g(bac)o(k)o
-(end)f(w)o(orks)g(quite)h(simply)h(b)o(y)300 1906 y(building)14
-b Fh(objdump)d Fm(from)g(the)g Fh(binutils)g Fm(directory)l(,)h(and)g(making)
-g(sure)g(that)300 1956 y(its)i(v)o(ersion)g(of)g(what's)e(going)i(on)g(at)f
-(y)o(our)h(host)f(systems)g(idea)i(\(assuming)f(it)300 2006
-y(has)j(the)f(prett)o(y)g(standard)g(co\013)g(dump)i(utilit)o(y)f(\(usually)h
-(called)27 b Fh(att-dump)300 2055 y Fm(or)15 b(just)g Fh(dump)p
-Fm(\)\))f(are)g(the)i(same.)300 2119 y(Then)21 b(clean)g(up)g(y)o(our)f(co)q
-(de,)i(and)e(send)h(what)f(y)o(ou'v)o(e)f(done)i(to)f(Cygn)o(us.)300
-2168 y(Then)f(y)o(our)e(stu\013)h(will)i(b)q(e)f(in)g(the)f(next)g(release,)i
-(and)e(y)o(ou)g(w)o(on't)f(ha)o(v)o(e)h(to)300 2218 y(k)o(eep)e(in)o
-(tegrating)f(it.)0 2359 y Fr(3.2.2)30 b(Ho)n(w)21 b(The)f(Co\013)g(Bac)n(k)n
-(end)h(W)-5 b(orks)0 2528 y(3.2.2.1)30 b(Bit)20 b(Twiddling)300
-2620 y Fm(Eac)o(h)c(\015a)o(v)o(our)f(of)g(co\013)h(supp)q(orted)g(in)h(bfd)f
-(has)g(its)g(o)o(wn)f(header)h(\014le)h(descib-)300 2670 y(ing)i(the)f
-(external)g(la)o(y)o(out)g(of)g(the)g(structures.)28 b(There)18
-b(is)h(also)f(an)g(in)o(ternal)0 2770 y Fk(c)6 b(y)g(g)g(n)g(u)g(s)36
-b(s)6 b(u)g(p)g(p)g(o)g(r)g(t)p 332 2761 1396 3 v 1421 w(Revision:)17
-b(1.5)p eop
-%%Page: 50 52
-bop 0 -58 a Fk(Chapter)13 b(3:)k(BFD)c(back)f(end)p 409 -66
-670 3 v 693 w(DRAFT)p 1222 -66 V 697 w Fj(50)300 183 y Fm(description)18
-b(of)d(the)h(co\013)g(la)o(y)o(out)f(\(in)21 b Fh(internalcoff.h)p
-Fm(\))14 b(\014le)j(\()5 b(\).)21 b(A)16 b(ma)s(jor)300 233
-y(function)f(of)f(the)g(co\013)f(bac)o(k)o(end)i(is)f(sw)o(apping)h(the)f(b)o
-(ytes)g(and)g(t)o(widdling)i(the)300 283 y(bits)g(to)f(translate)g(the)g
-(external)h(form)f(of)g(the)g(structures)g(in)o(to)g(the)h(normal)300
-333 y(in)o(ternal)f(form.)j(This)d(is)f(all)h(p)q(erformed)f(in)h(the)f
-Fh(bfd_swap)p 1340 333 14 2 v 15 w Ff(thing)p 1462 333 V 21
-w(direction)300 382 y Fm(routines.)19 b(Some)13 b(elemen)o(ts)g(are)f
-(di\013eren)o(t)g(sizes)i(b)q(et)o(w)o(een)e(di\013eren)o(t)h(v)o(ersions)300
-432 y(of)f(co\013,)f(it)h(is)h(the)f(dut)o(y)g(of)f(the)h(co\013)f(v)o
-(ersion)i(sp)q(eci\014c)g(include)i(\014le)e(to)e(o)o(v)o(erride)300
-482 y(the)18 b(de\014nitions)i(of)d(v)m(arious)i(pac)o(king)f(routines)g(in)
-36 b Fh(coffcode.h)p Fm(.)26 b(Eg)18 b(the)300 532 y(size)d(of)e(line)i(n)o
-(um)o(b)q(er)g(en)o(try)e(in)i(co\013)e(is)h(sometimes)g(16)f(bits,)h(and)g
-(sometimes)300 582 y(32)h(bits.)22 b Fh(#define)p Fm(ing)17
-b Fh(PUT_LNSZ_LNNO)c Fm(and)k Fh(GET_LNSZ_LNNO)d Fm(will)j(select)300
-632 y(the)f(correct)g(one.)24 b(No)16 b(doubt,)g(some)g(da)o(y)g(someone)g
-(will)i(\014nd)f(a)f(v)o(ersion)g(of)300 681 y(co\013)d(whic)o(h)i(has)e(a)h
-(v)m(arying)g(\014eld)h(size)g(not)e(catered)h(for)f(at)g(the)h(momen)o(t.)k
-(T)l(o)300 731 y(p)q(ort)d(bfd,)g(that)g(p)q(erson)g(will)i(ha)o(v)o(e)e(to)f
-(add)i(more)e Fh(#defines)p Fm(.)300 793 y(Three)29 b(of)f(the)h(bit)g(t)o
-(widdling)h(routines)f(are)g(exp)q(orted)g(to)108 b Fh(gdb)p
-Fm(;)300 843 y Fh(coff_swap_aux_in)p Fm(,)19 b Fh(coff_swap_sym_in)14
-b Fm(and)21 b Fh(coff_swap_linno_in)p Fm(.)300 893 y Fh(GDB)14
-b Fm(reads)f(the)i(sym)o(b)q(ol)f(table)g(on)g(its)h(o)o(wn,)e(but)h(uses)g
-(bfd)h(to)e(\014x)h(things)h(up.)0 1022 y Fr(3.2.2.2)30 b(Sym)n(b)r(ol)20
-b(Reading)300 1113 y Fm(The)12 b(simple)i(canonical)f(form)e(for)g(sym)o(b)q
-(ols)h(used)h(b)o(y)f(bfd)g(is)h(not)e(ric)o(h)i(enough)300
-1163 y(to)f(k)o(eep)h(all)g(the)g(information)f(a)o(v)m(ailable)j(in)e(a)f
-(co\013)g(sym)o(b)q(ol)h(table.)19 b(The)13 b(bac)o(k)300 1213
-y(end)20 b(gets)e(around)h(this)g(b)o(y)g(k)o(eeping)h(the)f(original)h(sym)o
-(b)q(ol)f(table)g(around,)300 1263 y Fh(")p Fm(b)q(ehind)e(the)e(sceens)p
-Fh(")p Fm(.)300 1325 y(When)c(a)e(sym)o(b)q(ol)i(table)f(is)h(requested)g
-(\(through)e(a)h(call)h(to)f Fh(bfd_canonicalize_symtab)p Fm(,)p
-2166 1336 21 46 v 300 1375 a(a)16 b(request)g(gets)f(through)h(to)k
-Fh(get_normalized_symtab)p Fm(.)f(This)e(reads)f(the)300 1425
-y(sym)o(b)q(ol)k(table)g(from)f(the)h(co\013)f(\014le)i(and)f(sw)o(aps)f(all)
-i(the)f(structures)f(inside)300 1474 y(in)o(to)e(the)h(in)o(ternal)g(form.)25
-b(It)18 b(also)f(\014xes)h(up)g(all)g(the)f(p)q(oin)o(ters)h(in)g(the)g
-(table)300 1524 y(\(represen)o(ted)e(in)g(the)f(\014le)i(b)o(y)e(o\013sets)f
-(from)h(the)g(\014rst)g(sym)o(b)q(ol)h(in)g(the)g(table\))300
-1574 y(in)o(to)k(ph)o(ysical)h(p)q(oin)o(ters)f(to)f(elemen)o(ts)h(in)h(the)f
-(new)g(in)o(ternal)g(table.)34 b(This)300 1624 y(in)o(v)o(olv)o(es)18
-b(some)g(w)o(ork)f(since)i(the)f(meanings)h(of)f(\014elds)h(c)o(hanges)f(dep)
-q(ending)300 1674 y(up)q(on)i(con)o(text;)h(a)e(\014eld)h(that)f(is)h(a)f(p)q
-(oin)o(ter)h(to)f(another)g(structure)g(in)h(the)300 1724 y(sym)o(b)q(ol)c
-(table)f(at)g(one)g(momen)o(t)g(ma)o(y)f(b)q(e)i(the)f(size)i(in)f(b)o(ytes)f
-(of)f(a)h(structure)300 1773 y(in)h(the)f(next.)300 1836 y(Another)k(pass)f
-(is)h(made)g(o)o(v)o(er)f(the)h(table.)30 b(All)20 b(sym)o(b)q(ols)f(whic)o
-(h)h(mark)e(\014le)300 1885 y(names)i(\()26 b Fh(C_FILE)19
-b Fm(sym)o(b)q(ols\))h(are)f(mo)q(di\014ed)i(so)f(that)f(the)g(in)o(ternal)i
-(string)300 1935 y(p)q(oin)o(ts)15 b(to)f(the)h(v)m(alue)h(in)g(the)e(auxen)o
-(t)h(\(the)g(real)g(\014lename\))g(rather)f(than)h(the)300
-1985 y(normal)g(text)g(asso)q(ciated)g(with)h(the)f(sym)o(b)q(ol)h(\()p
-Fh(".file")p Fm(\).)300 2047 y(A)o(t)j(this)h(time)f(the)h(sym)o(b)q(ol)f
-(names)h(are)f(mo)o(v)o(ed)g(around.)32 b(Co\013)18 b(stores)h(all)300
-2097 y(sym)o(b)q(ols)d(less)g(than)f(nine)i(c)o(haracters)d(long)i(ph)o
-(ysically)h(within)g(the)f(sym)o(b)q(ol)300 2147 y(table,)d(longer)h(strings)
-e(are)h(k)o(ept)g(at)f(the)h(end)h(of)e(the)h(\014le)h(in)g(the)f(string)g
-(table.)300 2197 y(This)22 b(pass)e(mo)o(v)o(es)h(all)h(strings)f(in)o(to)g
-(memory)l(,)g(and)h(replaces)g(them)f(with)300 2247 y(p)q(oin)o(ters)16
-b(to)e(the)h(strings.)300 2309 y(The)20 b(sym)o(b)q(ol)h(table)g(is)g
-(massaged)e(once)i(again,)g(this)g(time)f(to)g(create)g(the)300
-2359 y(canonical)12 b(table)f(used)h(b)o(y)f(the)g(bfd)g(application.)20
-b(Eac)o(h)11 b(sym)o(b)q(ol)g(is)g(insp)q(ected)300 2408 y(in)21
-b(turn,)f(and)g(a)g(decision)i(made)e(\(using)g(the)48 b Fh(sclass)19
-b Fm(\014eld\))i(ab)q(out)f(the)300 2458 y(v)m(arious)12 b(\015ags)f(to)f
-(set)i(in)g(the)f Fh(asymbol)g Fm(See)g(Section)i(2.4)d([Sym)o(b)q(ols],)i
-(page)f(14.)300 2508 y(The)h(generated)g(canonical)h(table)f(shares)f
-(strings)h(with)g(the)g(hidden)h(in)o(ternal)300 2558 y(sym)o(b)q(ol)j
-(table.)300 2620 y(An)o(y)d(linen)o(um)o(b)q(ers)i(are)e(read)g(from)f(the)i
-(co\013)e(\014le)i(to)q(o,)f(and)g(attatc)o(hed)f(to)h(the)300
-2670 y(sym)o(b)q(ols)i(whic)o(h)i(o)o(wn)d(the)i(functions)f(the)h(linen)o
-(um)o(b)q(ers)h(b)q(elong)f(to.)0 2770 y Fk(c)6 b(y)g(g)g(n)g(u)g(s)36
-b(s)6 b(u)g(p)g(p)g(o)g(r)g(t)p 332 2761 1396 3 v 1421 w(Revision:)17
-b(1.5)p eop
-%%Page: 51 53
-bop 0 -58 a Fk(Chapter)13 b(3:)k(BFD)c(back)f(end)p 409 -66
-670 3 v 693 w(DRAFT)p 1222 -66 V 697 w Fj(51)0 183 y Fr(3.2.2.3)30
-b(Sym)n(b)r(ol)20 b(W)-5 b(riting)300 277 y Fm(W)l(riting)15
-b(a)e(sym)o(b)q(ol)i(to)e(a)h(co\013)g(\014le)h(whic)o(h)g(didn't)f(come)h
-(from)e(a)h(co\013)f(\014le)i(will)300 327 y(lose)h(an)o(y)g(debugging)g
-(information.)22 b(The)e Fh(asymbol)14 b Fm(structure)i(remem)o(b)q(ers)300
-377 y(the)k(bfd)g(from)f(whic)o(h)h(w)o(as)f(b)q(orn,)i(and)f(on)f(output)h
-(the)g(bac)o(k)f(end)i(mak)o(es)300 427 y(sure)15 b(that)g(the)g(same)g
-(destination)h(target)e(as)h(source)g(target)f(is)i(presen)o(t.)300
-492 y(When)f(the)g(sym)o(b)q(ols)g(ha)o(v)o(e)f(come)h(from)f(a)g(co\013)h
-(\014le)g(then)g(all)h(the)f(debugging)300 541 y(information)g(is)h(preserv)o
-(ed.)300 606 y(Sym)o(b)q(ol)i(tables)g(are)f(pro)o(vided)i(for)e(writing)h
-(to)f(the)g(bac)o(k)h(end)g(in)g(a)g(v)o(ector)300 656 y(of)h(p)q(oin)o(ters)
-i(to)e(p)q(oin)o(ters.)34 b(This)20 b(allo)o(ws)g(applications)i(lik)o(e)f
-(the)f(link)o(er)h(to)300 706 y(accum)o(ulate)13 b(and)g(output)g(large)g
-(sym)o(b)q(ol)g(tables)h(without)e(ha)o(ving)i(to)e(do)h(to)q(o)300
-756 y(m)o(uc)o(h)i(b)o(yte)g(cop)o(ying.)300 821 y(The)j(sym)o(b)q(ol)g
-(table)g(is)g(not)f(output)h(to)f(a)g(writable)i(bfd)f(un)o(til)g(it)g(is)g
-(closed.)300 870 y(The)d(order)g(of)f(op)q(erations)h(on)g(the)g(canonical)h
-(sym)o(b)q(ol)g(table)f(at)f(that)g(p)q(oin)o(t)300 920 y(are:)300
-985 y Fh(coff_renumber_symbols)450 1035 y Fm(This)20 b(function)h(runs)f
-(through)g(the)g(pro)o(vided)g(sym)o(b)q(ol)g(table)h(and)450
-1085 y(patc)o(hes)16 b(eac)o(h)h(sym)o(b)q(ol)f(mark)o(ed)g(as)g(a)g(\014le)h
-(place)h(holder)f(\()7 b Fh(C_FILE)p Fm(\))450 1135 y(to)13
-b(p)q(oin)o(t)g(to)g(the)g(next)g(\014le)i(place)f(holder)g(in)g(the)f(list.)
-20 b(It)13 b(also)h(marks)450 1185 y(eac)o(h)43 b Fh(offset)18
-b Fm(\014eld)j(in)f(the)f(list)h(with)f(the)h(o\013set)e(from)g(the)h
-(\014rst)450 1234 y(sym)o(b)q(ol)d(of)e(the)i(curren)o(t)f(sym)o(b)q(ol.)450
-1299 y(Another)j(function)h(of)f(this)h(pro)q(cedure)g(is)g(to)e(turn)h(the)h
-(canonical)450 1349 y(v)m(alue)f(form)d(of)h(bfd)h(in)o(to)f(the)g(form)g
-(used)h(b)o(y)f(co\013.)23 b(In)o(ternally)l(,)18 b(bfd)450
-1399 y(exp)q(ects)e(sym)o(b)q(ol)g(v)m(alues)g(to)f(b)q(e)h(o\013sets)e(from)
-h(a)g(section)h(base;)f(so)g(a)450 1449 y(sym)o(b)q(ol)c(ph)o(ysically)i(at)d
-(0x120,)g(but)h(in)g(a)g(section)g(starting)f(at)g(0x100,)450
-1499 y(w)o(ould)16 b(ha)o(v)o(e)g(the)g(v)m(alue)h(0x20.)22
-b(Co\013)15 b(exp)q(ects)h(sym)o(b)q(ols)g(to)g(con)o(tain)450
-1548 y(their)d(\014nal)h(v)m(alue,)g(so)f(sym)o(b)q(ols)g(ha)o(v)o(e)g(their)
-g(v)m(alues)h(c)o(hanged)f(at)g(this)450 1598 y(p)q(oin)o(t)20
-b(to)g(re\015ect)g(their)h(sum)f(with)g(their)g(o)o(wning)g(section.)35
-b(Note)450 1648 y(that)18 b(this)h(transformation)e(uses)i(the)39
-b Fh(output_section)17 b Fm(\014eld)i(of)450 1698 y(the)c Fh(asymbol)p
-Fm('s)f Fh(asection)g Fm(See)i(Section)g(2.3)e([Sections],)h(page)g(8.)300
-1763 y Fh(coff_mangle_symbols)450 1813 y Fm(This)f(routine)f(runs)g(though)g
-(the)g(pro)o(vided)h(sym)o(b)q(ol)f(table)h(and)f(uses)450
-1862 y(the)18 b(o\013sets)g(generated)g(b)o(y)h(the)f(previous)h(pass)f(and)h
-(the)g(p)q(oin)o(ters)450 1912 y(generated)f(when)h(the)g(sym)o(b)q(ol)g
-(table)g(w)o(as)e(read)i(in)g(to)f(create)g(the)450 1962 y(structured)c
-(hierac)o(h)o(y)h(required)h(b)o(y)e(co\013.)19 b(It)c(c)o(hanges)f(eac)o(h)g
-(p)q(oin)o(ter)450 2012 y(to)h(a)f(sym)o(b)q(ol)i(to)e(an)i(index)g(in)o(to)f
-(the)g(sym)o(b)q(ol)h(table)g(of)e(the)i(sym)o(b)q(ol)450 2062
-y(b)q(eing)g(referenced.)300 2126 y Fh(coff_write_symbols)450
-2176 y Fm(This)i(routine)f(runs)g(through)g(the)g(sym)o(b)q(ol)h(table)f(and)
-g(patc)o(hes)g(up)450 2226 y(the)g(sym)o(b)q(ols)g(from)e(their)j(in)o
-(ternal)f(form)f(in)o(to)g(the)h(co\013)f(w)o(a)o(y)l(,)g(calls)450
-2276 y(the)f(bit)h(t)o(widdlers)g(and)f(writes)h(out)e(the)i(tab)q(el)g(to)e
-(the)i(\014le.)300 2341 y(The)f(hidden)i(information)f(for)e(an)h(asym)o(b)q
-(ol)h(is:)414 2391 y Fh(typedef)23 b(struct)g(coff_ptr_struct)414
-2441 y({)300 2505 y Ff(Remem)o(b)q(ers)12 b(the)f(o\013set)g(from)f(the)i
-(\014rst)e(sym)o(b)q(ol)i(in)g(the)f(\014le)i(for)d(this)k(sym)o(b)q(ol.)300
-2555 y(Generated)h(b)o(y)g Fh(coff_renumber_symbols)p Ff(.)462
-2605 y Fh(unsigned)22 b(int)i(offset;)300 2670 y Ff(Should)f(the)f(tag)e
-(\014eld)j(of)f(this)g(sym)o(b)q(ol)g(b)q(e)g(ren)o(um)o(b)q(ered.)40
-b(Created)21 b(b)o(y)0 2770 y Fk(c)6 b(y)g(g)g(n)g(u)g(s)36
-b(s)6 b(u)g(p)g(p)g(o)g(r)g(t)p 332 2761 1396 3 v 1421 w(Revision:)17
-b(1.5)p eop
-%%Page: 52 54
-bop 0 -58 a Fk(Chapter)13 b(3:)k(BFD)c(back)f(end)p 409 -66
-670 3 v 693 w(DRAFT)p 1222 -66 V 697 w Fj(52)300 183 y Fh
-(coff_pointerize_aux)p Ff(.)462 233 y Fh(char)23 b(fix_tag;)300
-296 y Ff(Should)18 b(the)e(endidx)i(\014eld)f(of)f(this)h(sym)o(b)q(ol)g(b)q
-(e)g(ren)o(um)o(b)q(ered.)24 b(Created)16 b(b)o(y)300 346 y
-Fh(coff_pointerize_aux)p Ff(.)462 396 y Fh(char)23 b(fix_end;)300
-459 y Ff(The)16 b(con)o(tainer)g(for)g(the)g(sym)o(b)q(ol)g(structure)f(as)h
-(read)g(and)g(translated)g(from)300 508 y(the)f(\014le.)462
-558 y Fh(union)23 b({)509 608 y(union)g(internal_auxent)f(auxent;)509
-658 y(struct)h(internal_syment)f(syment;)462 708 y(})h(u;)414
-757 y(})h(combined_entry_type;)300 870 y Fm(Eac)o(h)15 b(canonical)i(asym)o
-(b)q(ol)e(really)h(lo)q(oks)f(lik)o(e)i(this:)414 920 y Fh(typedef)23
-b(struct)g(coff_symbol_struct)414 970 y({)300 1033 y Ff(The)15
-b(actual)h(sym)o(b)q(ol)f(whic)o(h)h(the)g(rest)e(of)h(bfd)h(w)o(orks)e(with)
-462 1083 y Fh(asymbol)22 b(symbol;)300 1146 y Ff(A)15 b(p)q(oin)o(ter)h(to)e
-(the)i(hidden)h(information)e(for)g(this)g(sym)o(b)q(ol)462
-1195 y Fh(combined_entry_type)21 b(*native;)300 1258 y Ff(A)15
-b(p)q(oin)o(ter)h(to)e(the)i(linen)o(um)o(b)q(er)h(information)e(for)g(this)h
-(sym)o(b)q(ol)462 1308 y Fh(struct)23 b(lineno_cache_entry)e(*lineno;)414
-1358 y(})j(coff_symbol_type;)0 1497 y Fr(3.2.2.4)30 b(W)-5
-b(riting)20 b(Relo)r(cations)300 1589 y Fm(T)l(o)i(write)h(a)g(relo)q
-(cations,)i(all)e(the)g(bac)o(k)g(end)g(do)q(es)g(is)h(step)e(though)h(the)
-300 1639 y(canonical)f(relo)q(cation)f(table,)h(and)f(create)g(an)53
-b Fh(internal_reloc)p Fm(.)34 b(The)300 1689 y(sym)o(b)q(ol)15
-b(index)i(to)d(use)h(is)h(remo)o(v)o(ed)e(from)g(the)h Fh(offset)f
-Fm(\014eld)j(in)f(the)f(sym)o(b)q(ol)300 1739 y(table)d(supplied,)h(the)f
-(address)f(comes)g(directly)h(from)e(the)i(sum)f(of)f(the)h(section)300
-1788 y(base)18 b(address)h(and)g(the)f(relo)q(cation)h(o\013set)f(and)g(the)h
-(t)o(yp)q(e)f(is)h(dug)g(directly)300 1838 y(from)14 b(the)i(ho)o(wto)e
-(\014eld.)300 1901 y(Then)26 b(the)85 b Fh(internal_reloc)23
-b Fm(is)j(sw)o(app)q(ed)g(in)o(to)f(the)g(shap)q(e)h(of)f(an)300
-1951 y Fh(external_reloc)13 b Fm(and)j(written)f(out)g(to)f(disk.)0
-2090 y Fr(3.2.2.5)30 b(Reading)20 b(Linen)n(um)n(b)r(ers)300
-2182 y Fm(Createing)c(the)g(linen)o(um)o(b)q(er)i(table)e(is)g(done)h(b)o(y)e
-(reading)i(in)f(the)g(en)o(tire)h(co\013)300 2232 y(linen)o(um)o(b)q(er)g
-(table,)f(and)f(creating)g(another)g(table)h(for)e(in)o(ternal)i(use.)300
-2295 y(A)c(co\013)f(line)i(n)o(um)o(b)q(er)f(table)h(is)f(structured)f(so)h
-(that)f(eac)o(h)h(function)g(is)g(mark)o(ed)300 2345 y(as)19
-b(ha)o(ving)g(a)g(line)i(n)o(um)o(b)q(er)f(of)f(0.)31 b(Eac)o(h)19
-b(line)i(within)g(the)e(function)h(is)g(an)300 2395 y(o\013set)12
-b(from)h(the)g(\014rst)g(line)i(in)f(the)g(function.)20 b(The)13
-b(base)g(of)g(the)h(line)h(n)o(um)o(b)q(er)300 2444 y(information)f(for)g
-(the)g(table)h(is)g(stored)f(in)h(the)f(sym)o(b)q(ol)h(asso)q(ciated)f(with)h
-(the)300 2494 y(function.)300 2557 y(The)20 b(information)h(is)f(copied)h
-(from)f(the)g(external)g(to)g(the)g(in)o(ternal)h(table,)300
-2607 y(and)14 b(eac)o(h)g(sym)o(b)q(ol)g(whic)o(h)h(marks)f(a)f(function)i
-(is)f(mark)o(ed)g(b)o(y)g(p)q(oin)o(ting)h(its...)300 2670
-y(**Ho)o(w)f(do)q(es)i(this)f(w)o(ork)f(?**)0 2770 y Fk(c)6
-b(y)g(g)g(n)g(u)g(s)36 b(s)6 b(u)g(p)g(p)g(o)g(r)g(t)p 332
-2761 1396 3 v 1421 w(Revision:)17 b(1.5)p eop
-%%Page: 53 55
-bop 0 -58 a Fk(Chapter)13 b(3:)k(BFD)c(back)f(end)p 409 -66
-670 3 v 693 w(DRAFT)p 1222 -66 V 697 w Fj(53)0 183 y Fr(3.2.2.6)30
-b(Reading)20 b(Relo)r(cations)300 275 y Fm(Co\013)d(relo)q(cations)h(are)g
-(easily)g(transformed)f(in)o(to)h(the)g(in)o(ternal)g(bfd)g(form)f(\()300
-324 y Fh(arelent)p Fm(\).)300 387 y(Reading)f(a)f(co\013)g(relo)q(cation)h
-(table)f(is)h(done)g(in)g(the)f(follo)o(wing)h(stages:)337
-449 y Fq(\017)30 b Fm(The)15 b(en)o(tire)h(co\013)f(relo)q(cation)h(table)f
-(is)h(read)f(in)o(to)g(memory)l(.)337 511 y Fq(\017)30 b Fm(Eac)o(h)13
-b(relo)q(cation)h(is)g(pro)q(cessed)g(in)g(turn,)f(\014rst)g(it)h(is)g(sw)o
-(app)q(ed)f(from)g(the)390 561 y(external)j(to)e(the)h(in)o(ternal)i(form.)
-337 623 y Fq(\017)30 b Fm(The)g(sym)o(b)q(ol)f(referenced)i(in)f(the)f(relo)q
-(cation's)h(sym)o(b)q(ol)g(index)g(is)390 673 y(turned)22 b(in)o(to)g(a)g(p)q
-(oin)o(ter)h(in)o(to)f(the)g(canonical)h(sym)o(b)q(ol)f(table.)41
-b(Note)390 723 y(that)20 b(this)h(table)h(is)f(the)g(same)g(as)f(the)h(one)g
-(returned)g(b)o(y)g(a)g(call)h(to)390 773 y Fh(bfd_canonicalize_symtab)p
-Fm(.)c(The)e(bac)o(k)f(end)i(will)g(call)g(the)e(routine)390
-823 y(and)g(sa)o(v)o(e)g(the)g(result)h(if)f(a)g(canonicalization)j(hasn't)c
-(b)q(een)j(done.)337 885 y Fq(\017)30 b Fm(The)14 b(relo)q(c)g(index)h(is)f
-(turned)g(in)o(to)g(a)f(p)q(oin)o(ter)h(to)f(a)g(ho)o(wto)g(structure,)g(in)
-390 935 y(a)i(bac)o(k)h(end)g(sp)q(eci\014c)h(w)o(a)o(y)l(.)j(F)l(or)15
-b(instance,)h(the)g(386)e(and)i(960)f(use)g(the)390 984 y Fh(r_type)g
-Fm(to)h(directly)h(pro)q(duce)g(an)f(index)i(in)o(to)e(a)f(ho)o(wto)g(table)i
-(v)o(ector;)390 1034 y(the)g(88k)f(subtracts)h(a)f(n)o(um)o(b)q(er)i(from)e
-(the)28 b Fh(r_type)16 b Fm(\014eld)i(and)f(creates)390 1084
-y(an)e(addend)h(\014eld.)0 2770 y Fk(c)6 b(y)g(g)g(n)g(u)g(s)36
-b(s)6 b(u)g(p)g(p)g(o)g(r)g(t)p 332 2761 1396 3 v 1421 w(Revision:)17
-b(1.5)p eop
-%%Page: 54 56
-bop 0 -58 a Fk(F)o(unction)13 b(Index)p 238 -66 756 3 v 779
-w(DRAFT)p 1137 -66 V 782 w Fj(54)0 183 y Fi(F)-7 b(unction)26
-b(Index)0 403 y Fn(A)0 457 y Fe(aout)p 82 457 12 2 v 13 w(<size>)p
-215 457 V 11 w(machine)p 366 457 V 12 w(type)t Fd(:)6 b(:)g(:)g(:)g(:)g(:)g
-(:)g(:)h(:)f(:)g(:)g(:)g(:)g Fc(47)0 503 y Fe(aout)p 82 503
-V 13 w(<size>)p 215 503 V 11 w(mkobject)f Fd(:)h(:)h(:)f(:)g(:)g(:)g(:)g(:)g
-(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)j Fc(47)0 549 y Fe(aout)p
-82 549 V 13 w(<size>)p 215 549 V 11 w(set)p 286 549 V 13 w(arch)p
-379 549 V 13 w(mach)d Fd(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)i
-Fc(48)0 594 y Fe(aout)p 82 594 V 13 w(<size>)p 215 594 V 11
-w(some)p 306 594 V 13 w(aout)p 399 594 V 13 w(object)p 532
-594 V 11 w(p)t Fd(:)e(:)g(:)g(:)g(:)g(:)g(:)t Fc(47)0 640 y
-Fe(aout)p 82 640 V 13 w(<size>)p 215 640 V 11 w(swap)p 306
-640 V 13 w(exec)p 399 640 V 13 w(header)p 532 640 V 11 w(in)k
-Fd(:)c(:)h(:)f(:)g(:)11 b Fc(47)0 686 y Fe(aout)p 82 686 V
-13 w(<size>)p 215 686 V 11 w(swap)p 306 686 V 13 w(exec)p 399
-686 V 13 w(header)p 532 686 V 11 w(out)e Fd(:)d(:)g(:)g(:)k
-Fc(47)0 731 y Fe(aout)p 82 731 V 13 w(<size>ne)o(w)p 274 731
-V 11 w(section)p 425 731 V 12 w(hook)f Fd(:)d(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)
-11 b Fc(48)0 857 y Fn(B)0 911 y Fe(bfd)p 62 911 V 13 w(alloc)p
-175 911 V 12 w(size)6 b Fd(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)
-g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)i Fc(40)0 956 y
-Fe(bfd)p 62 956 V 13 w(arch)p 155 956 V 13 w(compatib)o(le)e
-Fd(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)k
-Fc(38)0 1002 y Fe(bfd)p 62 1002 V 13 w(architect)o(ure)d Fd(:)f(:)g(:)g(:)g
-(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)11
-b Fc(36)0 1048 y Fe(bfd)p 62 1048 V 13 w(cache)p 175 1048 V
-12 w(close)t Fd(:)6 b(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g
-(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g Fc(44)0 1093 y Fe(bfd)p 62
-1093 V 13 w(cache)p 175 1093 V 12 w(init)g Fd(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g
-(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)i
-Fc(44)0 1139 y Fe(bfd)p 62 1139 V 13 w(cache)p 175 1139 V 12
-w(lookup)r Fd(:)f(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)h
-(:)f(:)g(:)g(:)g(:)g(:)f Fc(43)0 1185 y Fe(bfd)p 62 1185 V
-13 w(cache)p 175 1185 V 12 w(lookup)p 307 1185 V 12 w(worker)g
-Fd(:)h(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)g
-Fc(44)0 1230 y Fe(BFD)p 62 1230 V 13 w(CACHE)p 175 1230 V 12
-w(MAX)p 247 1230 V 13 w(OPEN)s Fd(:)f(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g
-(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)f Fc(43)0 1276 y Fe(bfd)p
-62 1276 V 13 w(canonical)o(ize)p 313 1276 V 10 w(symtab)r Fd(:)h(:)h(:)f(:)g
-(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)f Fc(18)0 1322 y Fe(bfd)p
-62 1322 V 13 w(check)p 175 1322 V 12 w(format)r Fd(:)i(:)f(:)g(:)g(:)g(:)g(:)
-g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)f
-Fc(21)0 1367 y Fe(bfd)p 62 1367 V 13 w(close)k Fd(:)d(:)g(:)g(:)g(:)g(:)g(:)g
-(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f
-(:)g(:)g(:)11 b Fc(39)0 1413 y Fe(bfd)p 62 1413 V 13 w(core)p
-155 1413 V 13 w(file)p 248 1413 V 12 w(failing)p 400 1413 V
-12 w(command)c Fd(:)g(:)f(:)g(:)g(:)g(:)g(:)11 b Fc(30)0 1459
-y Fe(bfd)p 62 1459 V 13 w(core)p 155 1459 V 13 w(file)p 248
-1459 V 12 w(failing)p 400 1459 V 12 w(signal)q Fd(:)6 b(:)g(:)g(:)g(:)g(:)g
-(:)g(:)g(:)t Fc(30)0 1504 y Fe(bfd)p 62 1504 V 13 w(create)h
-Fd(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)
-g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)k Fc(39)0 1550 y Fe(bfd)p
-62 1550 V 13 w(fdopenr)c Fd(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g
-(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)j
-Fc(39)0 1596 y Fe(bfd)p 62 1596 V 13 w(find)p 155 1596 V 13
-w(target)s Fd(:)d(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g
-(:)g(:)g(:)g(:)g(:)h(:)f(:)g Fc(35)0 1641 y Fe(bfd)p 62 1641
-V 13 w(format)p 195 1641 V 12 w(string)q Fd(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g
-(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)t Fc(21)0
-1687 y Fe(bfd)p 62 1687 V 13 w(get)p 135 1687 V 13 w(elt)p
-208 1687 V 13 w(at)p 261 1687 V 13 w(index)s Fd(:)g(:)g(:)h(:)f(:)g(:)g(:)g
-(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g Fc(20)0 1733 y
-Fe(bfd)p 62 1733 V 13 w(get)p 135 1733 V 13 w(mtime)i Fd(:)e(:)g(:)g(:)g(:)g
-(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g
-(:)g(:)k Fc(6)0 1778 y Fe(bfd)p 62 1778 V 13 w(get)p 135 1778
-V 13 w(next)p 228 1778 V 13 w(mapent)q Fd(:)c(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g
-(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)t Fc(20)0 1824 y Fe(bfd)p
-62 1824 V 13 w(get)p 135 1824 V 13 w(section)p 288 1824 V 11
-w(by)p 339 1824 V 14 w(name)i Fd(:)e(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g
-(:)g(:)g(:)k Fc(12)0 1870 y Fe(bfd)p 62 1870 V 13 w(get)p 135
-1870 V 13 w(section)p 288 1870 V 11 w(contents)s Fd(:)c(:)g(:)g(:)g(:)g(:)g
-(:)g(:)h(:)f(:)g(:)g(:)g(:)g Fc(13)0 1915 y Fe(bfd)p 62 1915
-V 13 w(get)p 135 1915 V 13 w(size)i Fd(:)e(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)
-g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)k
-Fc(41)0 1961 y Fe(bfd)p 62 1961 V 13 w(h)p 95 1961 V 14 w(get)p
-169 1961 V 13 w(size)e Fd(:)e(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g
-(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)k Fc(41)0 2007 y
-Fe(bfd)p 62 2007 V 13 w(h)p 95 2007 V 14 w(put)p 169 2007 V
-13 w(size)e Fd(:)e(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)
-g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)k Fc(41)0 2052 y Fe(bfd)p 62
-2052 V 13 w(last)p 155 2052 V 13 w(cache)5 b Fd(:)h(:)g(:)g(:)g(:)g(:)g(:)g
-(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)i
-Fc(43)0 2098 y Fe(bfd)p 62 2098 V 13 w(log2)r Fd(:)e(:)g(:)g(:)g(:)g(:)g(:)g
-(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g
-(:)g(:)g(:)g(:)g(:)t Fc(42)0 2144 y Fe(bfd)p 62 2144 V 13 w(make)p
-155 2144 V 13 w(empty)p 268 2144 V 12 w(symbol)h Fd(:)f(:)g(:)g(:)g(:)g(:)g
-(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)k Fc(19)1230 403 y Fe(bfd)p
-1292 403 V 13 w(make)p 1385 403 V 13 w(section)q Fd(:)d(:)f(:)g(:)g(:)g(:)g
-(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)f
-Fc(12)1230 449 y Fe(bfd)p 1292 449 V 13 w(map)p 1365 449 V
-13 w(over)p 1458 449 V 13 w(sections)h Fd(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f
-(:)g(:)g(:)g(:)g(:)g(:)g(:)k Fc(12)1230 495 y Fe(bfd)p 1292
-495 V 13 w(open)p 1385 495 V 13 w(file)c Fd(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g
-(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)j
-Fc(44)1230 540 y Fe(bfd)p 1292 540 V 13 w(openr)g Fd(:)d(:)g(:)g(:)g(:)g(:)g
-(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)h
-(:)f(:)g(:)g(:)11 b Fc(39)1230 586 y Fe(bfd)p 1292 586 V 13
-w(openr)p 1405 586 V 12 w(next)p 1497 586 V 13 w(archived)p
-1670 586 V 11 w(file)r Fd(:)6 b(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)t
-Fc(20)1230 632 y Fe(bfd)p 1292 632 V 13 w(openw)j Fd(:)d(:)g(:)g(:)g(:)g(:)g
-(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)h
-(:)f(:)g(:)g(:)11 b Fc(39)1230 677 y Fe(bfd)p 1292 677 V 13
-w(perform)p 1445 677 V 11 w(relocation)r Fd(:)6 b(:)g(:)g(:)g(:)g(:)g(:)h(:)f
-(:)g(:)g(:)g(:)g(:)g(:)g(:)g Fc(23)1230 723 y Fe(bfd)p 1292
-723 V 13 w(prinable)p 1465 723 V 11 w(arch)p 1556 723 V 13
-w(mach)g Fd(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)j
-Fc(37)1230 769 y Fe(bfd)p 1292 769 V 13 w(print)p 1405 769
-V 12 w(symbol)p 1537 769 V 12 w(vandf)d Fd(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)
-g(:)g(:)g(:)g(:)g(:)g(:)j Fc(19)1230 814 y Fe(bfd)p 1292 814
-V 13 w(put)p 1365 814 V 13 w(size)f Fd(:)e(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)
-g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)k
-Fc(41)1230 860 y Fe(bfd)p 1292 860 V 13 w(scan)p 1385 860 V
-13 w(arch)p 1478 860 V 12 w(mach)s Fd(:)c(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)g
-(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)f Fc(38)1230 906 y Fe(bfd)p
-1292 906 V 13 w(set)p 1365 906 V 13 w(arch)p 1458 906 V 13
-w(mach)t Fd(:)h(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g
-(:)g(:)g(:)g(:)g(:)h Fc(38)1230 951 y Fe(bfd)p 1292 951 V 13
-w(set)p 1365 951 V 13 w(archive)p 1518 951 V 11 w(head)j Fd(:)c(:)g(:)g(:)g
-(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)11 b Fc(20)1230
-997 y Fe(bfd)p 1292 997 V 13 w(set)p 1365 997 V 13 w(format)5
-b Fd(:)h(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g
-(:)g(:)g(:)g(:)g(:)g(:)i Fc(21)1230 1043 y Fe(bfd)p 1292 1043
-V 13 w(set)p 1365 1043 V 13 w(section)p 1518 1043 V 11 w(contents)s
-Fd(:)e(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g Fc(13)1230
-1088 y Fe(bfd)p 1292 1088 V 13 w(set)p 1365 1088 V 13 w(section)p
-1518 1088 V 11 w(flags)i Fd(:)e(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g
-(:)g(:)g(:)g(:)k Fc(12)1230 1134 y Fe(bfd)p 1292 1134 V 13
-w(set)p 1365 1134 V 13 w(section)p 1518 1134 V 11 w(size)g
-Fd(:)c(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)11
-b Fc(13)1230 1180 y Fe(bfd)p 1292 1180 V 13 w(set)p 1365 1180
-V 13 w(start)p 1478 1180 V 12 w(address)d Fd(:)e(:)g(:)g(:)g(:)g(:)g(:)h(:)f
-(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)11 b Fc(6)1230 1225 y Fe(bfd)p
-1292 1225 V 13 w(set)p 1365 1225 V 13 w(symtab)5 b Fd(:)h(:)g(:)g(:)g(:)g(:)g
-(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)i
-Fc(18)1230 1271 y Fe(bfd)p 1292 1271 V 13 w(target)f Fd(:)f(:)g(:)g(:)g(:)h
-(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g
-(:)g(:)g(:)g(:)k Fc(31)1230 1316 y Fe(bfd)p 1292 1316 V 13
-w(target)p 1425 1316 V 12 w(list)t Fd(:)c(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g
-(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g Fc(35)1230
-1420 y Fn(C)1230 1474 y Fe(core)p 1312 1474 V 13 w(file)p 1405
-1474 V 12 w(matches)p 1557 1474 V 12 w(executab)o(le)p 1768
-1474 V 11 w(p)j Fd(:)d(:)g(:)g(:)g(:)g(:)k Fc(30)1230 1578
-y Fn(G)1230 1632 y Fe(get)p 1292 1632 V 13 w(symtab)p 1425
-1632 V 12 w(upper)p 1537 1632 V 12 w(bound)c Fd(:)g(:)g(:)h(:)f(:)g(:)g(:)g
-(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)j Fc(18)1230 1736 y Fn(H)1230
-1790 y Fe(HOWTO)s Fd(:)d(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g
-(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g
-(:)f Fc(28)1230 1886 y Fn(R)1230 1940 y Fe(reloc)p 1332 1940
-V 12 w(chain)i Fd(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)h
-(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)j Fc(28)1230
-1986 y Fe(reloc)p 1332 1986 V 12 w(howto)p 1444 1986 V 12 w(type)s
-Fd(:)e(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)
-g(:)g(:)g(:)f Fc(26)1230 2090 y Fn(S)1230 2144 y Fe(stuff)t
-Fd(:)h(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)
-g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)g
-Fc(7)0 2770 y Fk(c)g(y)g(g)g(n)g(u)g(s)36 b(s)6 b(u)g(p)g(p)g(o)g(r)g(t)p
-332 2761 1396 3 v 1421 w(Revision:)17 b(1.5)p eop
-%%Page: 55 57
-bop 0 -58 a Fk(Index)p 94 -66 828 3 v 851 w(DRAFT)p 1065 -66
-V 854 w Fj(55)0 183 y Fi(Index)0 403 y Fn(B)0 457 y Fc(BFD)6
-b Fd(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g
-(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g
-Fc(1)0 503 y(BFD)13 b(canonical)j(format)t Fd(:)6 b(:)g(:)g(:)g(:)g(:)g(:)g
-(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)t Fc(3)1230
-403 y Fn(I)1230 457 y Fc(in)o(ternal)15 b(ob)r(ject-\014le)f(format)c
-Fd(:)c(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)k
-Fc(3)1230 562 y Fn(W)1230 616 y Fc(what)j(is)h(it?)9 b Fd(:)d(:)g(:)g(:)g(:)g
-(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g(:)g
-(:)g(:)g(:)g(:)g(:)g(:)j Fc(1)0 2770 y Fk(c)d(y)g(g)g(n)g(u)g(s)36
-b(s)6 b(u)g(p)g(p)g(o)g(r)g(t)p 332 2761 1396 3 v 1421 w(Revision:)17
-b(1.5)p eop
-%%Page: 56 58
-bop 0 -58 a Fk(Index)p 94 -66 828 3 v 851 w(DRAFT)p 1065 -66
-V 854 w Fj(56)643 943 y Fm(The)16 b(b)q(o)q(dy)g(of)e(this)i(man)o(ual)f(is)h
-(set)f(in)799 993 y(cmr10)g(at)f(10.95pt,)631 1042 y(with)i(headings)g(in)g
-Fj(cm)o(b10)e(at)h(10.95pt)597 1092 y Fm(and)h(examples)g(in)g
-Fh(cmtt10)23 b(at)g(10.95pt)p Fm(.)754 1142 y Fl(cmti10)17
-b(at)f(10.95pt)21 b Fm(and)799 1192 y Ff(cmsl10)15 b(at)g(10.95pt)754
-1242 y Fm(are)g(used)h(for)e(emphasis.)0 2770 y Fk(c)6 b(y)g(g)g(n)g(u)g(s)36
-b(s)6 b(u)g(p)g(p)g(o)g(r)g(t)p 332 2761 1396 3 v 1421 w(Revision:)17
-b(1.5)p eop
-%%Page: -1 59
-bop 12 -66 885 3 v 909 -58 a Fk(DRAFT)p 1040 -66 V 911 w Fj(i)0
-183 y Fi(T)-7 b(able)27 b(of)f(Con)n(ten)n(ts)0 333 y Fn(1)67
-b(In)n(tro)r(duction)14 b Fb(:)e(:)e(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)h
-(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)h(:)f
-(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)h(:)f(:)g(:)g(:)k Fn(1)149 395
-y Fm(1.1)45 b(History)11 b Fa(:)d(:)f(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g
-(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f
-(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h
-(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)k Fm(1)149 445 y(1.2)45
-b(Ho)o(w)15 b(It)g(W)l(orks)7 b Fa(:)f(:)h(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)
-g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f
-(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h
-(:)f(:)g(:)g(:)g(:)f Fm(1)149 495 y(1.3)45 b(What)15 b(BFD)f(V)l(ersion)i(1)f
-(Can't)f(Do)6 b Fa(:)h(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)
-f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h
-(:)f(:)g(:)e Fm(2)299 544 y(1.3.1)44 b(Information)15 b(Loss)6
-b Fa(:)h(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g
-(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)h(:)f(:)g(:)g(:)g
-(:)h(:)f(:)g(:)g(:)e Fm(2)299 594 y(1.3.2)44 b(Mec)o(hanism)13
-b Fa(:)7 b(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)
-h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g
-(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)12 b Fm(3)0 694 y Fn(2)67
-b(BFD)22 b(fron)n(t)h(end)8 b Fb(:)i(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g
-(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g
-(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)e Fn(5)149 756 y
-Fm(2.1)45 b(t)o(yp)q(edef)16 b(bfd)c Fa(:)c(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g
-(:)g(:)h(:)f(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g
-(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g
-(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)j Fm(5)448 806 y(2.1.0.1)44
-b(bfd)p 690 806 14 2 v 16 w(set)p 762 806 V 16 w(start)p 873
-806 V 16 w(address)8 b Fa(:)f(:)g(:)h(:)f(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f
-(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g
-Fm(6)448 856 y(2.1.0.2)44 b(bfd)p 690 856 V 16 w(get)p 767
-856 V 16 w(m)o(time)11 b Fa(:)d(:)f(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g
-(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g
-(:)g(:)g(:)h(:)i Fm(6)448 906 y(2.1.0.3)44 b(stu\013)8 b Fa(:)e(:)h(:)h(:)f
-(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)h(:)f
-(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h
-(:)f(:)g(:)g Fm(7)149 955 y(2.2)45 b(Memory)14 b(Usage)7 b
-Fa(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)
-g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g
-(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)f
-Fm(8)149 1005 y(2.3)45 b(Sections)t Fa(:)8 b(:)f(:)h(:)f(:)g(:)g(:)g(:)h(:)f
-(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h
-(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g
-(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)h(:)f(:)g(:)s Fm(8)299
-1055 y(2.3.1)44 b(Section)16 b(Input)10 b Fa(:)e(:)f(:)g(:)g(:)g(:)h(:)f(:)g
-(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f
-(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)i
-Fm(8)299 1105 y(2.3.2)44 b(Section)16 b(Output)c Fa(:)7 b(:)g(:)h(:)f(:)g(:)g
-(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g
-(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)k
-Fm(9)299 1155 y(2.3.3)44 b(t)o(yp)q(edef)15 b(asection)g Fa(:)7
-b(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f
-(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h
-(:)f(:)g(:)13 b Fm(9)299 1204 y(2.3.4)44 b(section)16 b(protot)o(yp)q(es)11
-b Fa(:)c(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g
-(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g
-(:)g(:)12 b Fm(12)448 1254 y(2.3.4.1)44 b(bfd)p 690 1254 V
-16 w(get)p 767 1254 V 16 w(section)p 919 1254 V 17 w(b)o(y)p
-984 1254 V 17 w(name)12 b Fa(:)7 b(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)h(:)f(:)g(:)
-g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)12 b Fm(12)448
-1304 y(2.3.4.2)44 b(bfd)p 690 1304 V 16 w(mak)o(e)p 810 1304
-V 16 w(section)14 b Fa(:)7 b(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h
-(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)13
-b Fm(12)448 1354 y(2.3.4.3)44 b(bfd)p 690 1354 V 16 w(set)p
-762 1354 V 16 w(section)p 914 1354 V 17 w(\015ags)5 b Fa(:)i(:)g(:)h(:)f(:)g
-(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f
-(:)g(:)g(:)g(:)h(:)t Fm(12)448 1404 y(2.3.4.4)44 b(bfd)p 690
-1404 V 16 w(map)p 792 1404 V 17 w(o)o(v)o(er)p 892 1404 V 15
-w(sections)t Fa(:)8 b(:)f(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f
-(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)t Fm(12)448
-1453 y(2.3.4.5)44 b(bfd)p 690 1453 V 16 w(set)p 762 1453 V
-16 w(section)p 914 1453 V 17 w(size)15 b Fa(:)7 b(:)g(:)h(:)f(:)g(:)g(:)g(:)h
-(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h
-(:)f(:)13 b Fm(13)448 1503 y(2.3.4.6)44 b(bfd)p 690 1503 V
-16 w(set)p 762 1503 V 16 w(section)p 914 1503 V 17 w(con)o(ten)o(ts)7
-b Fa(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f
-(:)g(:)g(:)g(:)h(:)f(:)g(:)g Fm(13)448 1553 y(2.3.4.7)44 b(bfd)p
-690 1553 V 16 w(get)p 767 1553 V 16 w(section)p 919 1553 V
-17 w(con)o(ten)o(ts)5 b Fa(:)i(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)
-g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)e Fm(13)149
-1603 y(2.4)45 b(Sym)o(b)q(ols)11 b Fa(:)d(:)f(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f
-(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h
-(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g
-(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)k Fm(14)299 1653 y(2.4.1)44
-b(Reading)16 b(Sym)o(b)q(ols)d Fa(:)7 b(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h
-(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)h
-(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)j Fm(14)299 1703
-y(2.4.2)44 b(W)l(riting)16 b(Sym)o(b)q(ols)7 b Fa(:)g(:)h(:)f(:)g(:)g(:)g(:)h
-(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g
-(:)h(:)f(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)g
-Fm(15)299 1752 y(2.4.3)44 b(t)o(yp)q(edef)15 b(asym)o(b)q(ol)c
-Fa(:)d(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)
-g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g
-(:)g(:)g(:)k Fm(16)299 1802 y(2.4.4)44 b(Sym)o(b)q(ol)16 b(Handling)g(F)l
-(unctions)9 b Fa(:)f(:)f(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f
-(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)g
-Fm(18)448 1852 y(2.4.4.1)44 b(get)p 687 1852 V 16 w(sym)o(tab)p
-848 1852 V 15 w(upp)q(er)p 977 1852 V 17 w(b)q(ound)6 b Fa(:)i(:)f(:)h(:)f(:)
-g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)e
-Fm(18)448 1902 y(2.4.4.2)44 b(bfd)p 690 1902 V 16 w(canonicalize)p
-941 1902 V 19 w(sym)o(tab)12 b Fa(:)c(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h
-(:)f(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)13 b Fm(18)448
-1952 y(2.4.4.3)44 b(bfd)p 690 1952 V 16 w(set)p 762 1952 V
-16 w(sym)o(tab)13 b Fa(:)7 b(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g
-(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g
-(:)13 b Fm(18)448 2001 y(2.4.4.4)44 b(bfd)p 690 2001 V 16 w(prin)o(t)p
-803 2001 V 17 w(sym)o(b)q(ol)p 960 2001 V 17 w(v)m(andf)13
-b Fa(:)7 b(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)
-h(:)f(:)g(:)g(:)g(:)h(:)f(:)12 b Fm(19)448 2051 y(2.4.4.5)44
-b(bfd)p 690 2051 V 16 w(mak)o(e)p 810 2051 V 16 w(empt)o(y)p
-950 2051 V 16 w(sym)o(b)q(ol)13 b Fa(:)7 b(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)
-f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)12
-b Fm(19)149 2101 y(2.5)45 b(Arc)o(hiv)o(es)9 b Fa(:)f(:)f(:)g(:)h(:)f(:)g(:)g
-(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g
-(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f
-(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)i Fm(20)448
-2151 y(2.5.0.1)44 b(bfd)p 690 2151 V 16 w(get)p 767 2151 V
-16 w(next)p 870 2151 V 17 w(map)q(en)o(t)7 b Fa(:)g(:)g(:)g(:)h(:)f(:)g(:)g
-(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g
-(:)g(:)g Fm(20)448 2201 y(2.5.0.2)44 b(bfd)p 690 2201 V 16
-w(set)p 762 2201 V 16 w(arc)o(hiv)o(e)p 918 2201 V 17 w(head)11
-b Fa(:)c(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f
-(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)i Fm(20)448 2250 y(2.5.0.3)44
-b(bfd)p 690 2250 V 16 w(get)p 767 2250 V 16 w(elt)p 833 2250
-V 17 w(at)p 891 2250 V 16 w(index)8 b Fa(:)g(:)f(:)h(:)f(:)g(:)g(:)g(:)h(:)f
-(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h
-(:)f Fm(20)448 2300 y(2.5.0.4)44 b(bfd)p 690 2300 V 16 w(op)q(enr)p
-818 2300 V 17 w(next)p 922 2300 V 17 w(arc)o(hiv)o(ed)p 1104
-2300 V 17 w(\014le)6 b Fa(:)i(:)f(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h
-(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)f Fm(20)149 2350 y(2.6)45 b(File)16
-b(F)l(ormats)8 b Fa(:)e(:)h(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h
-(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g
-(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g
-(:)g(:)h Fm(21)448 2400 y(2.6.0.1)44 b(bfd)p 690 2400 V 16
-w(c)o(hec)o(k)p 813 2400 V 17 w(format)12 b Fa(:)7 b(:)g(:)h(:)f(:)g(:)g(:)g
-(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g
-(:)g(:)h(:)f(:)g(:)13 b Fm(21)448 2450 y(2.6.0.2)44 b(bfd)p
-690 2450 V 16 w(set)p 762 2450 V 16 w(format)9 b Fa(:)d(:)h(:)h(:)f(:)g(:)g
-(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g
-(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)g Fm(21)448 2500 y(2.6.0.3)44
-b(bfd)p 690 2500 V 16 w(format)p 840 2500 V 15 w(string)10
-b Fa(:)e(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g
-(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)j Fm(21)149
-2549 y(2.7)45 b(Relo)q(cations)10 b Fa(:)e(:)f(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)
-g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f
-(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h
-(:)f(:)g(:)g(:)g(:)h(:)f(:)i Fm(23)448 2599 y(2.7.0.1)44 b(bfd)p
-690 2599 V 16 w(p)q(erform)p 863 2599 V 17 w(relo)q(cation)7
-b Fa(:)h(:)f(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g
-(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g Fm(23)448 2649 y(2.7.0.2)44
-b(relo)q(c)p 720 2649 V 17 w(ho)o(wto)p 858 2649 V 15 w(t)o(yp)q(e)t
-Fa(:)8 b(:)f(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g
-(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)t Fm(26)0
-2770 y Fk(c)f(y)g(g)g(n)g(u)g(s)36 b(s)6 b(u)g(p)g(p)g(o)g(r)g(t)p
-332 2761 1396 3 v 1421 w(Revision:)17 b(1.5)p eop
-%%Page: -2 60
-bop 12 -66 879 3 v 903 -58 a Fk(DRAFT)p 1034 -66 V 905 w Fj(ii)448
-42 y Fm(2.7.0.3)44 b(HO)o(WTO)10 b Fa(:)c(:)i(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g
-(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g
-(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)i Fm(28)448 91 y(2.7.0.4)44
-b(relo)q(c)p 720 91 14 2 v 17 w(c)o(hain)14 b Fa(:)7 b(:)g(:)g(:)h(:)f(:)g(:)
-g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g
-(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)13 b Fm(28)149 141
-y(2.8)45 b(Core)15 b(\014les)d Fa(:)c(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h
-(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g
-(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g
-(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)j Fm(30)448 191 y(2.8.0.1)44
-b(bfd)p 690 191 V 16 w(core)p 787 191 V 17 w(\014le)p 861 191
-V 17 w(failing)p 999 191 V 18 w(command)11 b Fa(:)c(:)h(:)f(:)g(:)g(:)g(:)h
-(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)k Fm(30)448
-241 y(2.8.0.2)44 b(bfd)p 690 241 V 16 w(core)p 787 241 V 17
-w(\014le)p 861 241 V 17 w(failing)p 999 241 V 18 w(signal)10
-b Fa(:)e(:)f(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g
-(:)h(:)f(:)g(:)g(:)j Fm(30)448 291 y(2.8.0.3)44 b(core)p 707
-291 V 16 w(\014le)p 780 291 V 17 w(matc)o(hes)p 958 291 V 16
-w(executable)p 1181 291 V 18 w(p)14 b Fa(:)7 b(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)
-f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)14 b Fm(30)149 340 y(2.9)45
-b(T)l(argets)10 b Fa(:)c(:)h(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h
-(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h
-(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g
-(:)h(:)f(:)g(:)g(:)g(:)h(:)h Fm(31)448 390 y(2.9.0.1)44 b(bfd)p
-690 390 V 16 w(target)11 b Fa(:)c(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g
-(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f
-(:)g(:)g(:)g(:)h(:)f(:)g(:)k Fm(31)299 440 y(2.9.1)44 b(bfd)p
-505 440 V 17 w(target)11 b Fa(:)c(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h
-(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g
-(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)13
-b Fm(31)448 490 y(2.9.1.1)44 b(bfd)p 690 490 V 16 w(\014nd)p
-781 490 V 17 w(target)6 b Fa(:)g(:)h(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g
-(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g
-(:)g(:)h(:)d Fm(35)448 540 y(2.9.1.2)44 b(bfd)p 690 540 V 16
-w(target)p 826 540 V 15 w(list)15 b Fa(:)7 b(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g
-(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g
-(:)g(:)h(:)f(:)g(:)g(:)13 b Fm(35)149 589 y(2.10)45 b(Arc)o(hitectures)10
-b Fa(:)e(:)f(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g
-(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g
-(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)j
-Fm(36)448 639 y(2.10.0.1)43 b(bfd)p 712 639 V 17 w(arc)o(hitecture)12
-b Fa(:)c(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g
-(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)12 b Fm(36)448
-689 y(2.10.0.2)43 b(bfd)p 712 689 V 17 w(prinable)p 889 689
-V 18 w(arc)o(h)p 992 689 V 16 w(mac)o(h)9 b Fa(:)e(:)g(:)g(:)h(:)f(:)g(:)g(:)
-g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)g
-Fm(37)448 739 y(2.10.0.3)43 b(bfd)p 712 739 V 17 w(scan)p 815
-739 V 17 w(arc)o(h)p 917 739 V 16 w(mac)o(h)6 b Fa(:)h(:)g(:)g(:)g(:)h(:)f(:)
-g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f
-(:)g(:)f Fm(38)448 789 y(2.10.0.4)43 b(bfd)p 712 789 V 17 w(arc)o(h)p
-814 789 V 16 w(compatible)11 b Fa(:)e(:)e(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g
-(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)k
-Fm(38)448 839 y(2.10.0.5)43 b(bfd)p 712 839 V 17 w(set)p 785
-839 V 16 w(arc)o(h)p 886 839 V 16 w(mac)o(h)11 b Fa(:)d(:)f(:)g(:)g(:)g(:)h
-(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g
-(:)h(:)f(:)g(:)k Fm(38)149 888 y(2.11)45 b(Op)q(ening)17 b(and)e(Closing)h
-(BFDs)11 b Fa(:)6 b(:)i(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g
-(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g
-(:)g(:)g(:)h(:)i Fm(39)448 938 y(2.11.0.1)43 b(bfd)p 712 938
-V 17 w(op)q(enr)14 b Fa(:)7 b(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g
-(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g
-(:)g(:)h(:)f(:)g(:)13 b Fm(39)448 988 y(2.11.0.2)43 b(bfd)p
-712 988 V 17 w(fdop)q(enr)15 b Fa(:)7 b(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h
-(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g
-(:)h(:)f(:)g(:)g(:)g(:)14 b Fm(39)448 1038 y(2.11.0.3)43 b(bfd)p
-712 1038 V 17 w(op)q(en)o(w)6 b Fa(:)i(:)f(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)
-g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f
-(:)g(:)g(:)g(:)h(:)f(:)g(:)f Fm(39)448 1088 y(2.11.0.4)43 b(bfd)p
-712 1088 V 17 w(close)13 b Fa(:)8 b(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h
-(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g
-(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)12 b Fm(39)448 1137 y(2.11.0.5)43
-b(bfd)p 712 1137 V 17 w(create)10 b Fa(:)d(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)
-g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f
-(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)j Fm(39)448 1187 y(2.11.0.6)43
-b(bfd)p 712 1187 V 17 w(allo)q(c)p 820 1187 V 18 w(size)10
-b Fa(:)e(:)f(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g
-(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)j
-Fm(40)448 1237 y(2.11.1.7)43 b(bfd)p 712 1237 V 17 w(put)p
-797 1237 V 17 w(size)13 b Fa(:)7 b(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)
-g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f
-(:)g(:)g(:)g(:)12 b Fm(41)448 1287 y(2.11.1.8)43 b(bfd)p 712
-1287 V 17 w(get)p 790 1287 V 16 w(size)6 b Fa(:)i(:)f(:)g(:)g(:)h(:)f(:)g(:)g
-(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g
-(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)d Fm(41)448 1337 y(2.11.1.9)43
-b(bfd)p 712 1337 V 17 w(h)p 754 1337 V 17 w(put)p 839 1337
-V 16 w(size)11 b Fa(:)e(:)e(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g
-(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)k
-Fm(41)448 1386 y(2.11.1.10)43 b(bfd)p 735 1386 V 17 w(h)p 777
-1386 V 16 w(get)p 854 1386 V 16 w(size)15 b Fa(:)7 b(:)h(:)f(:)g(:)g(:)g(:)h
-(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g
-(:)h(:)f(:)g(:)g(:)g(:)14 b Fm(41)448 1436 y(2.11.1.11)43 b(bfd)p
-735 1436 V 17 w(log2)8 b Fa(:)e(:)i(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h
-(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g
-(:)h(:)f(:)g(:)g(:)g(:)h(:)f Fm(42)149 1486 y(2.12)45 b(File)16
-b(Cac)o(hing)8 b Fa(:)f(:)g(:)h(:)f(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g
-(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f
-(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h
-(:)f Fm(43)448 1536 y(2.12.0.1)43 b(BFD)p 745 1536 V 16 w(CA)o(CHE)p
-925 1536 V 16 w(MAX)p 1051 1536 V 16 w(OPEN)6 b Fa(:)i(:)f(:)h(:)f(:)g(:)g(:)
-g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)h(:)f(:)g(:)f Fm(43)448
-1586 y(2.12.0.2)43 b(bfd)p 712 1586 V 17 w(last)p 800 1586
-V 16 w(cac)o(he)13 b Fa(:)7 b(:)h(:)f(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g
-(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f
-(:)12 b Fm(43)448 1636 y(2.12.0.3)43 b(bfd)p 712 1636 V 17
-w(cac)o(he)p 836 1636 V 17 w(lo)q(okup)11 b Fa(:)d(:)f(:)h(:)f(:)g(:)g(:)g(:)
-h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g
-(:)h(:)f(:)k Fm(43)448 1685 y(2.12.0.4)43 b(bfd)p 712 1685
-V 17 w(cac)o(he)p 836 1685 V 17 w(init)15 b Fa(:)7 b(:)g(:)h(:)f(:)g(:)g(:)g
-(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g
-(:)g(:)h(:)f(:)g(:)g(:)g(:)14 b Fm(44)448 1735 y(2.12.0.5)43
-b(bfd)p 712 1735 V 17 w(cac)o(he)p 836 1735 V 17 w(close)11
-b Fa(:)d(:)f(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g
-(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)k Fm(44)448
-1785 y(2.12.0.6)43 b(bfd)p 712 1785 V 17 w(op)q(en)p 823 1785
-V 17 w(\014le)5 b Fa(:)k(:)e(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g
-(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g
-(:)g(:)e Fm(44)448 1835 y(2.12.0.7)43 b(bfd)p 712 1835 V 17
-w(cac)o(he)p 836 1835 V 17 w(lo)q(okup)p 986 1835 V 17 w(w)o(ork)o(er)8
-b Fa(:)e(:)h(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g
-(:)g(:)g(:)h(:)f(:)g Fm(44)0 1939 y Fn(3)67 b(BFD)22 b(bac)n(k)h(end)9
-b Fb(:)h(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g
-(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g
-(:)g(:)h(:)e Fn(45)149 2001 y Fm(3.1)45 b(a.out)14 b(bac)o(k)o(ends)7
-b Fa(:)h(:)f(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g
-(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g
-(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g
-Fm(46)299 2051 y(3.1.1)44 b(relo)q(cations)6 b Fa(:)h(:)h(:)f(:)g(:)g(:)h(:)f
-(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h
-(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g
-(:)h(:)d Fm(46)299 2101 y(3.1.2)44 b(In)o(ternal)16 b(En)o(try)e(P)o(oin)o
-(ts)d Fa(:)c(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g
-(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)i
-Fm(46)448 2151 y(3.1.2.1)44 b(aout)p 715 2151 V 15 w Fh(<)p
-Fm(size)p Fh(>)p 848 2151 V 17 w Fm(sw)o(ap)p 963 2151 V 16
-w(exec)p 1063 2151 V 17 w(header)p 1211 2151 V 17 w(in)14 b
-Fa(:)7 b(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)h(:)f(:)g(:)g(:)13
-b Fm(47)448 2201 y(3.1.2.2)44 b(aout)p 715 2201 V 15 w Fh(<)p
-Fm(size)p Fh(>)p 848 2201 V 17 w Fm(sw)o(ap)p 963 2201 V 16
-w(exec)p 1063 2201 V 17 w(header)p 1211 2201 V 17 w(out)9 b
-Fa(:)e(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)i
-Fm(47)448 2250 y(3.1.2.3)44 b(aout)p 715 2250 V 15 w Fh(<)p
-Fm(size)p Fh(>)p 848 2250 V 17 w Fm(some)p 964 2250 V 16 w(aout)p
-1069 2250 V 16 w(ob)s(ject)p 1208 2250 V 16 w(p)11 b Fa(:)d(:)f(:)g(:)h(:)f
-(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)k Fm(47)448
-2300 y(3.1.2.4)44 b(aout)p 715 2300 V 15 w Fh(<)p Fm(size)p
-Fh(>)p 848 2300 V 17 w Fm(mk)o(ob)s(ject)11 b Fa(:)6 b(:)i(:)f(:)g(:)g(:)g(:)
-h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h
-(:)i Fm(47)448 2350 y(3.1.2.5)44 b(aout)p 715 2350 V 15 w Fh(<)p
-Fm(size)p Fh(>)p 848 2350 V 17 w Fm(mac)o(hine)p 1027 2350
-V 18 w(t)o(yp)q(e)10 b Fa(:)d(:)g(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g
-(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)i Fm(47)448 2400 y(3.1.2.6)44
-b(aout)p 715 2400 V 15 w Fh(<)p Fm(size)p Fh(>)p 848 2400 V
-17 w Fm(set)p 921 2400 V 17 w(arc)o(h)p 1023 2400 V 16 w(mac)o(h)13
-b Fa(:)7 b(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)
-f(:)g(:)g(:)g(:)14 b Fm(48)448 2450 y(3.1.2.7)44 b(aout)p 715
-2450 V 15 w Fh(<)p Fm(size)p Fh(>)p Fm(new)p 926 2450 V 18
-w(section)p 1080 2450 V 17 w(ho)q(ok)9 b Fa(:)e(:)g(:)h(:)f(:)g(:)g(:)g(:)h
-(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)i Fm(48)149
-2499 y(3.2)45 b(co\013)15 b(bac)o(k)o(ends)e Fa(:)7 b(:)g(:)g(:)h(:)f(:)g(:)g
-(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g
-(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g
-(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)13 b Fm(49)299 2549 y(3.2.1)44
-b(P)o(orting)14 b(T)l(o)h(A)h(New)f(V)l(ersion)h(of)f(Co\013)6
-b Fa(:)g(:)h(:)g(:)g(:)h(:)f(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g
-(:)h(:)f(:)g(:)g(:)g(:)f Fm(49)299 2599 y(3.2.2)44 b(Ho)o(w)14
-b(The)i(Co\013)e(Bac)o(k)o(end)h(W)l(orks)e Fa(:)8 b(:)f(:)g(:)g(:)g(:)h(:)f
-(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h
-(:)13 b Fm(49)448 2649 y(3.2.2.1)44 b(Bit)15 b(Twiddling)f
-Fa(:)7 b(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h
-(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)j
-Fm(49)0 2770 y Fk(c)6 b(y)g(g)g(n)g(u)g(s)36 b(s)6 b(u)g(p)g(p)g(o)g(r)g(t)p
-332 2761 1396 3 v 1421 w(Revision:)17 b(1.5)p eop
-%%Page: -3 61
-bop 12 -66 873 3 v 897 -58 a Fk(DRAFT)p 1028 -66 V 898 w Fj(iii)448
-42 y Fm(3.2.2.2)44 b(Sym)o(b)q(ol)15 b(Reading)9 b Fa(:)g(:)e(:)g(:)h(:)f(:)g
-(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g
-(:)g(:)g(:)h(:)f(:)g(:)g(:)i Fm(50)448 91 y(3.2.2.3)44 b(Sym)o(b)q(ol)15
-b(W)l(riting)t Fa(:)9 b(:)e(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)h(:)f(:)g(:)g(:)g
-(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)t
-Fm(51)448 141 y(3.2.2.4)44 b(W)l(riting)15 b(Relo)q(cations)h
-Fa(:)7 b(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g
-(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)14 b Fm(52)448 191 y(3.2.2.5)44
-b(Reading)16 b(Linen)o(um)o(b)q(ers)6 b Fa(:)j(:)e(:)h(:)f(:)g(:)g(:)g(:)h(:)
-f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)f
-Fm(52)448 241 y(3.2.2.6)44 b(Reading)16 b(Relo)q(cations)9
-b Fa(:)f(:)g(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f
-(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)g Fm(53)0 345 y Fn(F)-6
-b(unction)25 b(Index)10 b Fb(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)h(:)f(:)g
-(:)g(:)g(:)h(:)f(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)h(:)f(:)g(:)g
-(:)g(:)h(:)f(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f Fn(54)0 457
-y(Index)5 b Fb(:)12 b(:)e(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h
-(:)f(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f
-(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g(:)g(:)h(:)f(:)g(:)g(:)g(:)h(:)f(:)g
-(:)c Fn(55)0 2770 y Fk(c)g(y)g(g)g(n)g(u)g(s)36 b(s)6 b(u)g(p)g(p)g(o)g(r)g
-(t)p 332 2761 1396 3 v 1421 w(Revision:)17 b(1.5)p eop
-%%Trailer
-end
-userdict /end-hook known{end-hook}if
-%%EOF
diff --git a/bfd/bfd.texinfo b/bfd/bfd.texinfo
deleted file mode 100755 (executable)
index 2320387..0000000
+++ /dev/null
@@ -1,492 +0,0 @@
-\input texinfo
-@setfilename bfdinfo
-@c $Id$
-@syncodeindex fn cp
-@ifinfo
-This file documents the BFD library.
-
-Copyright (C) 1991 Free Software Foundation, Inc.
-
-Permission is granted to make and distribute verbatim copies of
-this manual provided the copyright notice and this permission notice
-are preserved on all copies.
-
-@ignore
-Permission is granted to process this file through Tex and print the
-results, provided the printed document carries copying permission
-notice identical to this one except for the removal of this paragraph
-(this paragraph not being relevant to the printed manual).
-
-@end ignore
-Permission is granted to copy and distribute modified versions of this
-manual under the conditions for verbatim copying, subject to the terms
-of the GNU General Public License, which includes the provision that the
-entire resulting derived work is distributed under the terms of a
-permission notice identical to this one.
-
-Permission is granted to copy and distribute translations of this manual
-into another language, under the above conditions for modified versions.
-@end ifinfo
-@iftex
-@c@finalout
-@setchapternewpage on
-@c@setchapternewpage odd
-@settitle LIB BFD, the Binary File Descriptor Library
-@titlepage
-@title{libbfd}
-@subtitle{The Binary File Descriptor Library}
-@sp 1
-@subtitle First Edition---BFD version < 2.0
-@subtitle April 1991
-@author {Steve Chamberlain}
-@author {Cygnus Support}
-@page
-
-@tex
-\def\$#1${{#1}}  % Kluge: collect RCS revision info without $...$
-\xdef\manvers{\$Revision$}  % For use in headers, footers too
-{\parskip=0pt
-\hfill Cygnus Support\par
-\hfill steve\@cygnus.com\par
-\hfill {\it BFD}, \manvers\par
-\hfill \TeX{}info \texinfoversion\par
-}
-\global\parindent=0pt % Steve likes it this way
-@end tex
-
-@vskip 0pt plus 1filll
-Copyright @copyright{} 1991 Free Software Foundation, Inc.
-
-Permission is granted to make and distribute verbatim copies of
-this manual provided the copyright notice and this permission notice
-are preserved on all copies.
-
-Permission is granted to copy and distribute modified versions of this
-manual under the conditions for verbatim copying, subject to the terms
-of the GNU General Public License, which includes the provision that the
-entire resulting derived work is distributed under the terms of a
-permission notice identical to this one.
-
-Permission is granted to copy and distribute translations of this manual
-into another language, under the above conditions for modified versions.
-@end titlepage
-@end iftex
-
-@node Top, Overview, (dir), (dir)
-@ifinfo
-This file documents the binary file descriptor library libbfd.
-@end ifinfo
-
-@menu
-* Overview::                   Overview of BFD
-* History::                    History of BFD
-* Backends::                   Backends
-* Porting::                    Porting
-* Future::                     Future
-* Index::                      Index
-
-BFD body:
-* Memory usage::
-* Sections::
-* Symbols::
-* Archives::
-* Formats::
-* Relocations::
-* Core Files::
-* Targets::
-* Architecturs::
-* Opening and Closing::
-* Internal::
-* File Caching::
-
-BFD backends:
-* a.out backends::
-* coff backends::
-@end menu
-
-@node Overview, History, Top, Top
-@chapter Introduction
-@cindex BFD
-@cindex what is it?
-BFD is a package for manipulating binary files required for developing
-programs.  It implements a group of structured operations designed to
-shield the programmer from the underlying representation of these
-binary files.  It understands object (compiled) files, archive
-libraries, and core files.  It is designed to work in a variety of
-target environments.
-
-Most simply put, BFD is a package which allows applications to use the
-same routines to operate on object files whatever the object file
-format.  
-
-BFD is split into two parts; the front end and the many back ends.
-@itemize @bullet
-@item 
-The front end of BFD provides the interface to the user. It manages
-memory, and various canonical data structures. The front end also
-decides which back end to use, and when to call back end routines.
-@item 
-The back ends provide BFD its view of the real world.  A different
-object file format can be supported simply by creating a new BFD back
-end and adding it to the library.  Each back end provides a set of calls
-which the BFD front end can use to maintain its canonical form. The back
-ends also may keep around information for their own use, for greater
-efficiency.
-@end itemize
-@node History, How It Works, Overview,Top
-@section History
-
-One spur behind BFD was the desire, on the part of the GNU 960 team at
-Intel Oregon, for interoperability of applications on their COFF and
-b.out file formats.  Cygnus was providing GNU support for the team, and
-Cygnus was contracted to provide the required functionality.
-
-The name came from a conversation David Wallace was having with Richard
-Stallman about the library: RMS said that it would be quite hard---David
-said ``BFD''.  Stallman was right, but the name stuck.
-
-At the same time, Ready Systems wanted much the same thing, but for
-different object file formats: IEEE-695, Oasys, Srecords, a.out and 68k
-coff.
-
-BFD was first implemented by Steve Chamberlain (steve@@cygnus.com),
-John Gilmore (gnu@@cygnus.com),  K. Richard Pixley (rich@@cygnus.com) and
-David Wallace (gumby@@cygnus.com) at Cygnus Support in Palo Alto,
-California.
-
-@node How It Works, History, Porting, Top
-@section How It Works
-
-To use the library, include @code{bfd.h} and link with @code{libbfd.a}.        
-
-BFD provides a common interface to the parts of an object file
-for a calling application. 
-
-When an application sucessfully opens a target file (object, archive or
-whatever) a pointer to an internal structure is returned. This pointer
-points to a structure called @code{bfd}, described in
-@code{include/bfd.h}.  Our convention is to call this pointer a BFD, and
-instances of it within code @code{abfd}.  All operations on
-the target object file are applied as methods to the BFD.  The mapping is
-defined within @code{bfd.h} in a set of macros, all beginning
-@samp{bfd_}.
-
-In short, a BFD is a representation for a particular file.  It is opened
-in a manner similar to a file; code then manipulates it rather than the
-raw files.
-
-For example, this sequence would do what you would probably expect:
-return the number of sections in an object file attached to a BFD
-@code{abfd}. 
-
-@lisp
-@cartouche
-#include "bfd.h"
-
-unsigned int number_of_sections(abfd)
-bfd *abfd;
-@{
-  return bfd_count_sections(abfd);
-@}
-@end cartouche
-@end lisp
-
-The abstraction used within BFD is that an object file has a header,
-a number of sections containing raw data, a set of relocations, and some
-symbol information. Also, BFDs opened for archives have the
-additional attribute of an index and contain subordinate BFDs. This approach is
-fine for a.out and coff, but loses efficiency when applied to formats
-such as S-records and IEEE-695. 
-
-@cindex targets
-@cindex formats
-BFD makes a distinction between @dfn{targets} (families of file
-formats) and @dfn{formats} (individual file formats).  For instance,
-the @code{"sun4os4"} target can handle core, object and archive formats of
-files.  The exact layout of the different formats depends on the target
-environment.
-
-The target @code{"default"} means the first one known (usually used for
-environments that only support one format, or where the common format
-is known at compile or link time).  The target @code{NULL} means the one
-specified at runtime in the environment variable @code{GNUTARGET}; if that is
-null or not defined then, on output, the first entry in the target list
-is chosen; or, on input, all targets are searched to find a matching
-one.
-
-Most programs should use the target @code{NULL}.  See the descriptions
-of @code{bfd_target_list} and @code{bfd_format_string} for functions to
-inquire on targets and formats.
-
-@section What BFD Version 1 Can Do
-As different information from the the object files is required,
-BFD reads from different sections of the file and processes them.
-For example a very common operation for the linker is processing symbol
-tables.  Each BFD back end provides a routine for converting
-between the object file's representation of symbols and an internal
-canonical format. When the linker asks for the symbol table of an object
-file, it calls through the memory pointer to the relevant BFD
-back end routine which reads and converts the table into a canonical
-form.  The linker then operates upon the canonical form. When the link is
-finished and the linker writes the output file's symbol table,
-another BFD back end routine is called which takes the newly
-created symbol table and converts it into the chosen output format.
-
-@node BFD information loss, Mechanism, BFD outline, BFD
-@subsection Information Loss
-@emph{Some information is lost due to the nature of the file format.} The output targets
-supported by BFD do not provide identical facilities, and
-information which may be described in one form has nowhere to go in
-another format. One example of this is alignment information in
-@code{b.out}. There is nowhere in an @code{a.out} format file to store
-alignment information on the contained data, so when a file is linked
-from @code{b.out} and an @code{a.out} image is produced, alignment
-information will not propagate to the output file. (The linker will
-still use the alignment information internally, so the link is performed
-correctly).
-
-Another example is COFF section names. COFF files may contain an
-unlimited number of sections, each one with a textual section name. If
-the target of the link is a format which does not have many sections (eg
-@code{a.out}) or has sections without names (eg the Oasys format) the
-link cannot be done simply. You can circumvent this problem by
-describing the desired input-to-output section mapping with the linker command
-language.
-
-@emph{Information can be lost during canonicalization.} The BFD
-internal canonical form of the external formats is not exhaustive; there
-are structures in input formats for which there is no direct
-representation internally.  This means that the BFD back ends
-cannot maintain all possible data richness through the transformation
-between external to internal and back to external formats.
-
-This limitation is only a problem when an application reads one
-format and writes another.  Each BFD back end is responsible for
-maintaining as much data as possible, and the internal BFD
-canonical form has structures which are opaque to the BFD core,
-and exported only to the back ends. When a file is read in one format,
-the canonical form is generated for BFD and the application. At the
-same time, the back end saves away any information which may otherwise
-be lost. If the data is then written back in the same format, the back
-end routine will be able to use the canonical form provided by the
-BFD core as well as the information it prepared earlier.  Since
-there is a great deal of commonality between back ends, this mechanism
-is very useful. There is no information lost for this reason when
-linking or copying big endian COFF to little endian COFF, or @code{a.out} to
-@code{b.out}.  When a mixture of formats is linked, the information is
-only lost from the files whose format differs from the destination.
-
-@node Mechanism,  , BFD information loss, BFD
-@subsection Mechanism 
-The greatest potential for loss of information is when there is least
-overlap between the information provided by the source format, that
-stored by the canonical format, and the information needed by the
-destination format. A brief description of the canonical form may help
-you appreciate what kinds of data you can count on preserving across
-conversions.
-@cindex BFD canonical format
-@cindex internal object-file format
-
-@table @emph
-@item files
-Information on target machine architecture, particular implementation
-and format type are stored on a per-file basis. Other information
-includes a demand pageable bit and a write protected bit.  Note that
-information like Unix magic numbers is not stored here---only the magic
-numbers' meaning, so a @code{ZMAGIC} file would have both the demand
-pageable bit and the write protected text bit set.  The byte order of
-the target is stored on a per-file basis, so that big- and little-endian
-object files may be linked with one another.
-@c FIXME: generalize above from "link"?
-
-@item sections
-Each section in the input file contains the name of the section, the
-original address in the object file, various flags, size and alignment
-information and pointers into other BFD data structures.
-
-@item symbols
-Each symbol contains a pointer to the object file which originally
-defined it, its name, its value, and various flag bits.  When a
-BFD back end reads in a symbol table, the back end relocates all
-symbols to make them relative to the base of the section where they were
-defined.  This ensures that each symbol points to its containing
-section.  Each symbol also has a varying amount of hidden data to contain
-private data for the BFD back end.  Since the symbol points to the
-original file, the private data format for that symbol is accessible.
-@code{gld} can operate on a collection of symbols of wildly different
-formats without problems.
-
-Normal global and simple local symbols are maintained on output, so an
-output file (no matter its format) will retain symbols pointing to
-functions and to global, static, and common variables.  Some symbol
-information is not worth retaining; in @code{a.out} type information is
-stored in the symbol table as long symbol names.  This information would
-be useless to most COFF debuggers; the linker has command line switches
-to allow users to throw it away.
-
-There is one word of type information within the symbol, so if the
-format supports symbol type information within symbols (for example COFF,
-IEEE, Oasys) and the type is simple enough to fit within one word
-(nearly everything but aggregates) the information will be preserved.
-
-@item relocation level
-Each canonical BFD relocation record contains a pointer to the symbol to
-relocate to, the offset of the data to relocate, the section the data
-is in and a pointer to a relocation type descriptor. Relocation is
-performed effectively by message passing through the relocation type
-descriptor and symbol pointer. It allows relocations to be performed
-on output data using a relocation method only available in one of the
-input formats. For instance, Oasys provides a byte relocation format.
-A relocation record requesting this relocation type would point
-indirectly to a routine to perform this, so the relocation may be
-performed on a byte being written to a COFF file, even though 68k COFF
-has no such relocation type.
-
-@item line numbers
-Object formats can contain, for debugging purposes, some form of mapping
-between symbols, source line numbers, and addresses in the output file.
-These addresses have to be relocated along with the symbol information.
-Each symbol with an associated list of line number records points to the
-first record of the list.  The head of a line number list consists of a
-pointer to the symbol, which allows divination of the address of the
-function whose line number is being described. The rest of the list is
-made up of pairs: offsets into the section and line numbers. Any format
-which can simply derive this information can pass it successfully
-between formats (COFF, IEEE and Oasys).
-@end table
-
-@c FIXME: what is this line about?  Do we want introductory remarks 
-@c FIXME... on back ends?  commented out for now.
-@c What is a backend
-@node BFD front end, BFD back end, Mechanism, Top
-@chapter BFD front end
-@include  bfd.texi
-
-@node Memory Usage, Errors, bfd, Top
-@section Memory Usage
-BFD keeps all its internal structures in obstacks. There is one obstack
-per open BFD file, into which the current state is stored. When a BFD is
-closed, the obstack is deleted, and so everything which has been
-allocated by libbfd for the closing file will be thrown away.
-
-BFD will not free anything created by an application, but pointers into
-@code{bfd} structures will be invalidated on a @code{bfd_close}; for example,
-after a @code{bfd_close} the vector passed to
-@code{bfd_canonicalize_symtab} will still be around, since it has been
-allocated by the application, but the data that it pointed to will be
-lost.
-
-The general rule is not to close a BFD until all operations dependent
-upon data from the BFD have been completed, or all the data from within
-the file has been copied. To help with the management of memory, there is a function
-(@code{bfd_alloc_size}) which returns the number of bytes in obstacks
-associated with the supplied BFD. This could be used to select the
-greediest open BFD, close it to reclaim the memory, perform some
-operation and reopen the BFD again, to get a fresh copy of the data
-structures.
-
-@node Errors, Sections, Memory Usage, Top
-@section Error Handling
-
-@cindex errors
-In general, a boolean function returns true on success and false on failure
-(unless it's a predicate).  Functions which return pointers to
-objects return @code{NULL} on error.  The specifics are documented with each
-function.
-
-If a function fails, you should check the variable @code{bfd_error}.  If
-the value is @code{no_error}, then check the C variable @code{errno}
-just as you would with any other program.  Other values for
-@code{bfd_error} are documented in @file{bfd.h}.
-
-@findex bfd_errmsg
-If you would prefer a comprehensible string for the error message, use
-the function @code{bfd_errmsg}:
-@example
-char * bfd_errmsg (error_tag)
-@end example
-This function returns a read-only string which documents the error
-code.  If the error code is @code{no_error} then it will return a string
-depending on the value of @code{errno}.
-
-@findex bfd_perror
-@code{bfd_perror()} is like the @code{perror()} function except it understands
-@code{bfd_error}.
-
-
-@node Sections, Symbols, Errors, Top
-@include  section.texi
-
-@node Symbols, Archives ,Sections, To
-@include  syms.texi
-
-@node Archives, Formats, Symbols, Top
-@include  archive.texi
-
-@node Formats, Relocations, Archives, Top
-@include  format.texi
-
-@node Relocations, Core Files,Formats, Top
-@include  reloc.texi
-
-@node Core Files, Targets,  Relocations, Top
-@include  core.texi
-
-@node Targets, Architectures, Core Files, Top
-@include  targets.texi
-
-@node Architectures, Opening and Closing, Targets, Top
-@include  archures.texi
-
-@node Opening and Closing, Internal, Architectures, Top
-@include  opncls.texi
-
-@node Internal, File Caching, Opening and Closing, Top
-@include  libbfd.texi
-
-@node File Caching, Top, Internal, Top
-@include  cache.texi
-
-@chapter BFD back end
-@node BFD back end, ,BFD front end, Top
-@menu
-* What to put where
-* a.out backends::
-* coff backends::
-* oasys backend::
-* ieee backend::
-* srecord backend::
-@end menu
-@node What to Put Where, aout backends, BFD back end, BFD back end
-All of BFD lives in one directory.
-
-@node aout backends, coff backends, What to Put Where, BFD back end
-@include  aoutx.texi
-
-@node coff backends, oasys backends, aout backends, BFD back end
-@include  coffcode.texi
-
-@node Index,  , BFD, Top
-@unnumbered Index
-@printindex cp
-
-@tex
-% I think something like @colophon should be in texinfo.  In the
-% meantime:
-\long\def\colophon{\hbox to0pt{}\vfill
-\centerline{The body of this manual is set in}
-\centerline{\fontname\tenrm,}
-\centerline{with headings in {\bf\fontname\tenbf}}
-\centerline{and examples in {\tt\fontname\tentt}.}
-\centerline{{\it\fontname\tenit\/} and}
-\centerline{{\sl\fontname\tensl\/}}
-\centerline{are used for emphasis.}\vfill}
-\page\colophon
-% Blame: pesch@cygnus.com, 28mar91.
-@end tex
-
-
-@contents
-@bye
-
-
diff --git a/bfd/blins-p b/bfd/blins-p
deleted file mode 100755 (executable)
index 858dcd7..0000000
+++ /dev/null
@@ -1,8 +0,0 @@
-# sed script for BFD header files
-# Merge adjacent blank lines.  Loop til no change.
-:blin
-/^$/,/^ *[^ ]*.*$/{
-/^$/N
-s/^ *\n *$//
-}
-t blin
diff --git a/bfd/coff-code.h b/bfd/coff-code.h
deleted file mode 100755 (executable)
index 9040236..0000000
+++ /dev/null
@@ -1,2608 +0,0 @@
-/* Support for Intel 960 COFF and Motorola 88k BCS COFF (and maybe others) */
-
-/* Copyright (C) 1990, 1991 Free Software Foundation, Inc.
-
-This file is part of BFD, the Binary File Diddler.
-
-BFD is free software; you can redistribute it and/or modify it under the
-   terms of the GNU General Public License as published by the Free Software
-   Foundation; either version 1, or (at your option) any later version.
-
-BFD is distributed in the hope that it will be useful, but WITHOUT ANY
-   WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
-   FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more
-   details.
-
-You should have received a copy of the GNU General Public License along with
-   BFD; see the file COPYING.  If not, write to the Free Software Foundation,
-   675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-/* $Id$ */
-/* Most of this hacked by Steve Chamberlain, steve@cygnus.com */
-
-#include "archures.h"          /* Machine architectures and types */
-
-/* SUPPRESS 558 */
-/* SUPPRESS 590 */
-/* SUPPRESS 529 */
-/* SUPPRESS 530 */
-
-/* Align an address upward to a boundary, expressed as a number of bytes.
-   E.g. align to an 8-byte boundary with argument of 8.  */
-#define ALIGN(this, boundary) \
-  ((( (this) + ((boundary) -1)) & (~((boundary)-1))))
-
-/* Align an address upward to a power of two.  Argument is the power
-   of two, e.g. 8-byte alignment uses argument of 3 (8 == 2^3).  */
-#define        i960_align(addr, align) \
-       ( ((addr) + ((1<<(align))-1)) & (-1 << (align)))
-
-#define sp(x) bfd_h_put_x(abfd, x, &x)
-
-#ifndef I960
-#define GDB_EXPORT static
-#else
-#define GDB_EXPORT  /* nothing */
-#endif
-
-PROTO(static void,force_indices_file_symbol_relative,(bfd *abfd,
-                                                     struct internal_syment *symtab));
-
-\f
-/* void warning(); */
-extern asection abs_section;
-
-static int
-DEFUN(get_index,(symbol),
-      asymbol        *symbol)
-{
-    return (int) symbol->value;
-}
-
-static void
-DEFUN(set_index,(symbol, idx),
-      asymbol        *symbol AND
-      unsigned int    idx)
-{
-    symbol->value = idx;
-}
-
-
-
-
-
-/* All the swapping routines:
-*/
-
-
-GDB_EXPORT
-void
-DEFUN(bfd_swap_reloc_in,(abfd, reloc_src, reloc_dst),
-      bfd            *abfd AND
-      RELOC *reloc_src AND
-      struct internal_reloc *reloc_dst)
-{
-  reloc_dst->r_vaddr = bfd_h_getlong(abfd, reloc_src->r_vaddr);
-  reloc_dst->r_symndx = bfd_h_getlong(abfd, reloc_src->r_symndx);
-  reloc_dst->r_type = bfd_h_getshort(abfd, reloc_src->r_type);
-#if M88
-  reloc_dst->r_offset = bfd_h_getshort(abfd, reloc_src->r_offset);
-#endif
-}
-
-GDB_EXPORT
- void
-DEFUN(bfd_swap_reloc_out,(abfd, reloc_src, reloc_dst),
-      bfd            *abfd AND
-      struct internal_reloc *reloc_src AND
-      struct external_reloc *reloc_dst)
-{
-  bfd_h_putlong(abfd, reloc_src->r_vaddr, reloc_dst->r_vaddr);
-  bfd_h_putlong(abfd, reloc_src->r_symndx, reloc_dst->r_symndx);
-  bfd_h_putshort(abfd, reloc_src->r_type, reloc_dst->r_type);
-#if M88
-  bfd_h_putshort(abfd, reloc_src->r_offset, reloc_dst->r_offset);
-#endif
-
-}
-
-GDB_EXPORT  void 
-DEFUN(bfd_swap_filehdr_in,(abfd, filehdr_src, filehdr_dst),
-      bfd            *abfd AND
-      FILHDR         *filehdr_src AND
-      struct internal_filehdr *filehdr_dst)
-{
-  filehdr_dst->f_magic = bfd_h_get_x(abfd, filehdr_src->f_magic);
-  filehdr_dst->f_nscns = bfd_h_get_x(abfd,filehdr_src-> f_nscns);
-  filehdr_dst->f_timdat = bfd_h_get_x(abfd,filehdr_src-> f_timdat);
-  filehdr_dst->f_symptr = bfd_h_get_x(abfd,filehdr_src-> f_symptr);
-  filehdr_dst->f_nsyms = bfd_h_get_x(abfd,filehdr_src-> f_nsyms);
-  filehdr_dst->f_opthdr = bfd_h_get_x(abfd,filehdr_src-> f_opthdr);
-  filehdr_dst->f_flags = bfd_h_get_x(abfd,filehdr_src-> f_flags);
-}
-
-GDB_EXPORT  void 
-DEFUN(bfd_swap_filehdr_out,(abfd, filehdr_in, filehdr_out),
-      bfd            *abfd AND
-      struct internal_filehdr *filehdr_in AND
-      FILHDR         *filehdr_out)
-{
-  bfd_h_put_x(abfd, filehdr_in->f_magic, filehdr_out->f_magic);
-  bfd_h_put_x(abfd, filehdr_in->f_nscns, filehdr_out->f_nscns);
-  bfd_h_put_x(abfd, filehdr_in->f_timdat, filehdr_out->f_timdat);
-  bfd_h_put_x(abfd, filehdr_in->f_symptr, filehdr_out->f_symptr);
-  bfd_h_put_x(abfd, filehdr_in->f_nsyms, filehdr_out->f_nsyms);
-  bfd_h_put_x(abfd, filehdr_in->f_opthdr, filehdr_out->f_opthdr);
-  bfd_h_put_x(abfd, filehdr_in->f_flags, filehdr_out->f_flags);
-}
-
-
-GDB_EXPORT 
-void 
-DEFUN(bfd_coff_swap_sym_in,(abfd, ext, in),
-      bfd            *abfd AND
-      SYMENT *ext AND
-      struct internal_syment      *in)
-{
-  if( ext->e.e_name[0] == 0) {
-    in->_n._n_n._n_zeroes = 0;
-    in->_n._n_n._n_offset = bfd_h_getlong(abfd, ext->e.e.e_offset);
-  }
-  else {
-    memcpy(in->_n._n_name, ext->e.e_name, SYMNMLEN);
-  }
-  in->n_value = bfd_h_get_x(abfd, ext->e_value);
-  in->n_scnum = bfd_h_get_x(abfd, ext->e_scnum);
-  in->n_type = bfd_h_get_x(abfd, ext->e_type);
-  in->n_sclass = bfd_h_get_x(abfd, ext->e_sclass);
-  in->n_numaux = bfd_h_get_x(abfd, ext->e_numaux);
-}
-
-GDB_EXPORT void 
-DEFUN(bfd_coff_swap_sym_out,(abfd,in,  ext),
-      bfd            *abfd AND
-      struct internal_syment      *in AND
-      SYMENT *ext)
-{
-  if(in->_n._n_name[0] == 0) {
-    bfd_h_putlong(abfd, 0, ext->e.e.e_zeroes);
-    bfd_h_putlong(abfd, in->_n._n_n._n_offset,  ext->e.e.e_offset);
-  }
-  else {
-    memcpy(ext->e.e_name, in->_n._n_name, SYMNMLEN);
-  }
-  bfd_h_put_x(abfd,  in->n_value , ext->e_value);
-  bfd_h_put_x(abfd,  in->n_scnum , ext->e_scnum);
-  bfd_h_put_x(abfd,  in->n_type , ext->e_type);
-  bfd_h_put_x(abfd,  in->n_sclass , ext->e_sclass);
-  bfd_h_put_x(abfd,  in->n_numaux , ext->e_numaux);
-}
-
-GDB_EXPORT void
-DEFUN(bfd_coff_swap_aux_in,(abfd, ext, type, class, in),
-      bfd            *abfd AND
-      AUXENT    *ext AND
-      int             type AND
-      int             class AND
-      union internal_auxent  *in)
-{
-  switch (class) {
-  case C_FILE:
-    if (ext->x_file.x_fname[0] == 0) {
-      in->x_file.x_n.x_zeroes = 0;
-      in->x_file.x_n.x_offset  = bfd_h_getlong(abfd, ext->x_file.x_n.x_offset);
-    }
-
-    break;
-  case C_STAT:
-#ifdef C_LEAFSTAT
-  case C_LEAFSTAT:
-#endif
-  case C_HIDDEN:
-    if (type == T_NULL) {
-      in->x_scn.x_scnlen = bfd_h_get_x(abfd, ext->x_scn.x_scnlen);
-      in->x_scn.x_nreloc = bfd_h_get_x(abfd, ext->x_scn.x_nreloc);
-      in->x_scn.x_nlinno = bfd_h_get_x(abfd, ext->x_scn.x_nlinno);
-      break;
-    }
-  default:
-    in->x_sym.x_tagndx = bfd_h_get_x(abfd, ext->x_sym.x_tagndx);
-    in->x_sym.x_tvndx = bfd_h_get_x(abfd, ext->x_sym.x_tvndx);
-
-    if (ISARY(type) || class == C_BLOCK) {
-      in->x_sym.x_fcnary.x_ary.x_dimen[0] = bfd_h_get_x(abfd, ext->x_sym.x_fcnary.x_ary.x_dimen[0]);
-      in->x_sym.x_fcnary.x_ary.x_dimen[1] = bfd_h_get_x(abfd, ext->x_sym.x_fcnary.x_ary.x_dimen[1]);
-      in->x_sym.x_fcnary.x_ary.x_dimen[2] = bfd_h_get_x(abfd, ext->x_sym.x_fcnary.x_ary.x_dimen[2]);
-      in->x_sym.x_fcnary.x_ary.x_dimen[3] = bfd_h_get_x(abfd, ext->x_sym.x_fcnary.x_ary.x_dimen[3]);
-    }
-    else {
-      in->x_sym.x_fcnary.x_fcn.x_lnnoptr = bfd_h_get_x(abfd, ext->x_sym.x_fcnary.x_fcn.x_lnnoptr);
-      in->x_sym.x_fcnary.x_fcn.x_endndx = bfd_h_get_x(abfd, ext->x_sym.x_fcnary.x_fcn.x_endndx);
-    }
-    if (ISFCN(type)) {
-      in->x_sym.x_misc.x_fsize = bfd_h_get_x(abfd, ext->x_sym.x_misc.x_fsize);
-    }
-    else {
-      in->x_sym.x_misc.x_lnsz.x_lnno = bfd_h_get_x(abfd, ext->x_sym.x_misc.x_lnsz.x_lnno);
-      in->x_sym.x_misc.x_lnsz.x_size = bfd_h_get_x(abfd, ext->x_sym.x_misc.x_lnsz.x_size);
-    }
-  }
-}
-
-GDB_EXPORT void
-DEFUN(bfd_coff_swap_aux_out,(abfd, in, type, class, ext),
-  bfd   *abfd AND
-  union internal_auxent *in AND
-  int    type AND
-  int    class AND
-  AUXENT *ext)
-{
-  switch (class) {
-  case C_FILE:
-    if (in->x_file.x_fname[0] == 0) {
-      bfd_h_put_x(abfd, 0, ext->x_file.x_n.x_zeroes );
-      bfd_h_put_x(abfd, in->x_file.x_n.x_offset, ext->x_file.x_n.x_offset);
-    }
-
-    break;
-  case C_STAT:
-#ifdef C_LEAFSTAT
-  case C_LEAFSTAT:
-#endif
-  case C_HIDDEN:
-    if (type == T_NULL) {
-      bfd_h_put_x(abfd, in->x_scn.x_scnlen, ext->x_scn.x_scnlen);
-      bfd_h_put_x(abfd, in->x_scn.x_nreloc, ext->x_scn.x_nreloc);
-      bfd_h_put_x(abfd, in->x_scn.x_nlinno, ext->x_scn.x_nlinno);
-      break;
-    }
-  default:
-    bfd_h_put_x(abfd, in->x_sym.x_tagndx, ext->x_sym.x_tagndx);
-    bfd_h_put_x(abfd, in->x_sym.x_tvndx , ext->x_sym.x_tvndx);
-
-    if (ISARY(type) || class == C_BLOCK) {
-      bfd_h_put_x(abfd, in->x_sym.x_fcnary.x_ary.x_dimen[0],ext->x_sym.x_fcnary.x_ary.x_dimen[0]);
-      bfd_h_put_x(abfd, in->x_sym.x_fcnary.x_ary.x_dimen[1],ext->x_sym.x_fcnary.x_ary.x_dimen[1]);
-      bfd_h_put_x(abfd, in->x_sym.x_fcnary.x_ary.x_dimen[2],ext->x_sym.x_fcnary.x_ary.x_dimen[2]);
-      bfd_h_put_x(abfd, in->x_sym.x_fcnary.x_ary.x_dimen[3],ext->x_sym.x_fcnary.x_ary.x_dimen[3]);
-    }
-    else {
-      bfd_h_put_x(abfd, in->x_sym.x_fcnary.x_fcn.x_lnnoptr, ext->x_sym.x_fcnary.x_fcn.x_lnnoptr);
-      bfd_h_put_x(abfd, in->x_sym.x_fcnary.x_fcn.x_endndx, ext->x_sym.x_fcnary.x_fcn.x_endndx);
-    }
-    if (ISFCN(type)) {
-      bfd_h_put_x(abfd, in->x_sym.x_misc.x_fsize, ext->x_sym.x_misc.x_fsize);
-    }
-    else {
-      bfd_h_put_x(abfd, in->x_sym.x_misc.x_lnsz.x_lnno, ext->x_sym.x_misc.x_lnsz.x_lnno);
-      bfd_h_put_x(abfd, in->x_sym.x_misc.x_lnsz.x_size, ext->x_sym.x_misc.x_lnsz.x_size);
-    }
-  }
-}
-
-GDB_EXPORT void
-DEFUN(bfd_coff_swap_lineno_in,(abfd, ext, in),
-      bfd            *abfd AND
-      LINENO *ext AND
-      struct internal_lineno      *in)
-{
-    in->l_addr.l_symndx = bfd_h_get_x(abfd, ext->l_addr.l_symndx);
-    in->l_lnno = bfd_h_get_x(abfd, ext->l_lnno);
-}
-
-GDB_EXPORT void
-DEFUN(bfd_coff_swap_lineno_out,(abfd, in, ext),
-      bfd            *abfd AND
-      struct internal_lineno      *in AND
-      struct external_lineno *ext)
-{
-  bfd_h_put_x(abfd, in->l_addr.l_symndx, ext->l_addr.l_symndx);
-  bfd_h_put_x(abfd, in->l_lnno, ext->l_lnno);
-}
-
-
-
-
-GDB_EXPORT void 
-DEFUN(bfd_swap_aouthdr_in,(abfd, aouthdr_ext, aouthdr_int),
-      bfd            *abfd AND
-      AOUTHDR        *aouthdr_ext AND
-      struct internal_aouthdr *aouthdr_int)
-{
-  aouthdr_int->magic = bfd_h_get_x(abfd, aouthdr_ext->magic);
-  aouthdr_int->vstamp = bfd_h_get_x(abfd, aouthdr_ext->vstamp);
-  aouthdr_int->tsize = bfd_h_get_x(abfd, aouthdr_ext->tsize);
-  aouthdr_int->dsize = bfd_h_get_x(abfd, aouthdr_ext->dsize);
-  aouthdr_int->bsize = bfd_h_get_x(abfd, aouthdr_ext->bsize);
-  aouthdr_int->entry = bfd_h_get_x(abfd, aouthdr_ext->entry);
-  aouthdr_int->text_start = bfd_h_get_x(abfd, aouthdr_ext->text_start);
-  aouthdr_int->data_start = bfd_h_get_x(abfd, aouthdr_ext->data_start);
-#ifdef I960
-  aouthdr_int->tagentries = bfd_h_get_x(abfd, aouthdr_ext->tagentries);
-#endif
-}
-
-GDB_EXPORT void 
-DEFUN(bfd_swap_aouthdr_out,(abfd, aouthdr_in, aouthdr_out),
-      bfd            *abfd AND
-      struct internal_aouthdr *aouthdr_in AND
-      AOUTHDR        *aouthdr_out)
-{
-  bfd_h_put_x(abfd, aouthdr_in->magic, aouthdr_out->magic);
-  bfd_h_put_x(abfd, aouthdr_in->vstamp, aouthdr_out->vstamp);
-  bfd_h_put_x(abfd, aouthdr_in->tsize, aouthdr_out->tsize);
-  bfd_h_put_x(abfd, aouthdr_in->dsize, aouthdr_out->dsize);
-  bfd_h_put_x(abfd, aouthdr_in->bsize, aouthdr_out->bsize);
-  bfd_h_put_x(abfd, aouthdr_in->entry, aouthdr_out->entry);
-  bfd_h_put_x(abfd, aouthdr_in->text_start, aouthdr_out->text_start);
-  bfd_h_put_x(abfd, aouthdr_in->data_start, aouthdr_out->data_start);
-#ifdef I960
-  bfd_h_put_x(abfd, aouthdr_in->tagentries, aouthdr_out->tagentries);
-#endif
-}
-
-GDB_EXPORT void 
-DEFUN(bfd_coff_swap_scnhdr_in,(abfd, scnhdr_ext, scnhdr_int),
-      bfd            *abfd AND
-      SCNHDR         *scnhdr_ext AND
-      struct internal_scnhdr *scnhdr_int)
-{
-  memcpy(scnhdr_int->s_name, scnhdr_ext->s_name, sizeof(scnhdr_int->s_name));
-  scnhdr_int->s_vaddr = bfd_h_get_x(abfd, scnhdr_ext->s_vaddr);
-  scnhdr_int->s_paddr = bfd_h_get_x(abfd, scnhdr_ext->s_paddr);
-  scnhdr_int->s_size = bfd_h_get_x(abfd, scnhdr_ext->s_size);
-  scnhdr_int->s_scnptr = bfd_h_get_x(abfd, scnhdr_ext->s_scnptr);
-  scnhdr_int->s_relptr = bfd_h_get_x(abfd, scnhdr_ext->s_relptr);
-  scnhdr_int->s_lnnoptr = bfd_h_get_x(abfd, scnhdr_ext->s_lnnoptr);
-  scnhdr_int->s_nreloc = bfd_h_get_x(abfd, scnhdr_ext->s_nreloc);
-  scnhdr_int->s_nlnno = bfd_h_get_x(abfd, scnhdr_ext->s_nlnno);
-  scnhdr_int->s_flags = bfd_h_get_x(abfd, scnhdr_ext->s_flags);
-#ifdef I960
-  scnhdr_int->s_align = bfd_h_get_x(abfd, scnhdr_ext->s_align);
-#endif
-}
-
-static void 
-DEFUN(swap_scnhdr_out,(abfd, scnhdr_int, scnhdr_ext),
-      bfd            *abfd AND
-      struct internal_scnhdr *scnhdr_int AND
-      SCNHDR         *scnhdr_ext)
-{
-  memcpy(scnhdr_ext->s_name, scnhdr_int->s_name, sizeof(scnhdr_int->s_name));
-  bfd_h_put_x(abfd, scnhdr_int->s_vaddr, scnhdr_ext->s_vaddr);
-  bfd_h_put_x(abfd, scnhdr_int->s_paddr, scnhdr_ext->s_paddr);
-  bfd_h_put_x(abfd, scnhdr_int->s_size, scnhdr_ext->s_size);
-  bfd_h_put_x(abfd, scnhdr_int->s_scnptr, scnhdr_ext->s_scnptr);
-  bfd_h_put_x(abfd, scnhdr_int->s_relptr, scnhdr_ext->s_relptr);
-  bfd_h_put_x(abfd, scnhdr_int->s_lnnoptr, scnhdr_ext->s_lnnoptr);
-  bfd_h_put_x(abfd, scnhdr_int->s_nreloc, scnhdr_ext->s_nreloc);
-  bfd_h_put_x(abfd, scnhdr_int->s_nlnno, scnhdr_ext->s_nlnno);
-  bfd_h_put_x(abfd, scnhdr_int->s_flags, scnhdr_ext->s_flags);
-#ifdef I960
-  bfd_h_put_x(abfd, scnhdr_int->s_align, scnhdr_ext->s_align);
-#endif
-}
-
-/*
-   initialize a section structure with information peculiar to this
-   particular implementation of coff
-*/
-
-static          boolean
-DEFUN(coff_new_section_hook,(abfd_ignore, section_ignore),
-      bfd            *abfd_ignore AND
-      asection       *section_ignore)
-{
-#ifdef MC88MAGIC
-  /* FIXME, shouldn't this ifdef be on something that says we are
-     actually COMPILING FOR an 88K coff file, rather than simply
-     knowing its magic number? */
-  /* Align to at least 16 bytes */
-  section_ignore->alignment_power = 4;
-#endif
-#if M68
-  section_ignore->alignment_power = 3;
-#endif
-  return true;
-}
-
-/* Take a section header read from a coff file (in HOST byte order),
-   and make a BFD "section" out of it.  */
-static          boolean
-DEFUN(make_a_section_from_file,(abfd, hdr),
-      bfd            *abfd AND
-      struct internal_scnhdr  *hdr)
-{
-    asection       *return_section;
-
-    {
-       /* Assorted wastage to null-terminate the name, thanks AT&T! */
-       char *name = bfd_alloc(abfd, sizeof (hdr->s_name)+1);
-       if (name == NULL) {
-           bfd_error = no_memory;
-           return false;
-       }
-       strncpy(name, (char *) &hdr->s_name[0], sizeof (hdr->s_name));
-       name[sizeof (hdr->s_name)] = 0;
-
-       return_section = bfd_make_section(abfd, name);
-    }
-
-    /* s_paddr is presumed to be = to s_vaddr */
-#define assign(to, from) return_section->to = hdr->from
-    assign(vma, s_vaddr);
-    /* assign (vma, s_vaddr); */
-    assign(size, s_size);
-    assign(filepos, s_scnptr);
-    assign(rel_filepos, s_relptr);
-    assign(reloc_count, s_nreloc);
-#ifdef I960
-    {
-       /* FIXME, use a temp var rather than alignment_power */
-       assign(alignment_power, s_align);
-       {
-           unsigned int    i;
-           for (i = 0; i < 32; i++) {
-               if ((1 << i) >= (int) (return_section->alignment_power)) {
-                   return_section->alignment_power = i;
-                   break;
-               }
-           }
-       }
-    }
-#endif
-    assign(line_filepos, s_lnnoptr);
-    /*
-       return_section->linesize =   hdr->s_nlnno * sizeof (struct lineno);
-    */
-
-#undef assign
-    return_section->lineno_count = hdr->s_nlnno;
-    return_section->userdata = NULL;
-    return_section->next = (asection *) NULL;
-    return_section->flags = 0;
-    if ((hdr->s_flags & STYP_TEXT) || (hdr->s_flags & STYP_DATA))
-       return_section->flags = (SEC_LOAD | SEC_ALLOC);
-    else if (hdr->s_flags & STYP_BSS)
-       return_section->flags = SEC_ALLOC;
-
-    if (hdr->s_nreloc != 0)
-       return_section->flags |= SEC_RELOC;
-    if (hdr->s_scnptr != 0)
-       return_section->flags |= SEC_HAS_CONTENTS;
-    return true;
-}
-static          boolean
-DEFUN(coff_mkobject,(abfd),
-      bfd            *abfd)
-{
-  set_tdata (abfd, bfd_zalloc (abfd,sizeof(coff_data_type)));
-  if (coff_data(abfd) == 0) {
-    bfd_error = no_memory;
-    return false;
-  }
-  coff_data(abfd)->relocbase = 0;
-  return true;
-}
-
-static
-bfd_target     *
-DEFUN(coff_real_object_p,(abfd, nscns, internal_f, internal_a),
-    bfd            *abfd AND
-    unsigned        nscns AND
-  struct internal_filehdr *internal_f AND
-  struct internal_aouthdr *internal_a)
-{
-  coff_data_type *coff;
-
-  size_t          readsize;    /* length of file_info */
-  SCNHDR *external_sections;
-  
-  /* Build a play area */
-  if (coff_mkobject(abfd) != true)
-    return 0;
-  coff = coff_data(abfd);
-  
-  
-  external_sections = (SCNHDR *)bfd_alloc(abfd, readsize = (nscns * SCNHSZ));
-  if (bfd_read((PTR)external_sections, 1, readsize, abfd) != readsize) {
-    goto fail;
-  }
-  
-  
-  
-  /* Now copy data as required; construct all asections etc */
-  coff->symbol_index_slew = 0;
-  coff->relocbase =0;
-  coff->raw_syment_count = 0;
-  coff->raw_linenos = 0;
-  coff->raw_syments = 0;
-  coff->sym_filepos =0;
-  coff->flags = internal_f->f_flags;
-  if (nscns != 0) {
-    unsigned int    i;
-    for (i = 0; i < nscns; i++) {
-      struct internal_scnhdr tmp;
-      bfd_coff_swap_scnhdr_in(abfd, external_sections + i, &tmp);
-      make_a_section_from_file(abfd,&tmp);
-    }
-  }
-  /* Determine the machine architecture and type.  */
-  abfd->obj_machine = 0;
-  switch (internal_f->f_magic) {
-#ifdef MIPS
-case  MIPS_MAGIC_1:
-case  MIPS_MAGIC_2:
-case  MIPS_MAGIC_3:
-    abfd->obj_arch = bfd_arch_mips;
-    abfd->obj_machine = 0;
-    break;
-#endif
-
-#ifdef MC68MAGIC
-  case MC68MAGIC:
-  case M68MAGIC:
-    abfd->obj_arch = bfd_arch_m68k;
-    abfd->obj_machine = 68020;
-    break;
-#endif
-#ifdef MC88MAGIC
-  case MC88MAGIC:
-  case MC88DMAGIC:
-  case MC88OMAGIC:
-    abfd->obj_arch = bfd_arch_m88k;
-    abfd->obj_machine = 88100;
-    break;
-#endif
-#ifdef I960
-#ifdef I960ROMAGIC
-  case I960ROMAGIC:
-  case I960RWMAGIC:
-    abfd->obj_arch = bfd_arch_i960;
-    switch (F_I960TYPE & internal_f->f_flags) 
-       {
-       default:
-       case F_I960CORE:
-         abfd->obj_machine = bfd_mach_i960_core;
-         break;
-       case F_I960KB:
-         abfd->obj_machine = bfd_mach_i960_kb_sb;
-         break;
-       case F_I960MC:
-         abfd->obj_machine = bfd_mach_i960_mc;
-         break;
-       case F_I960XA:
-         abfd->obj_machine = bfd_mach_i960_xa;
-         break;
-       case F_I960CA:
-         abfd->obj_machine = bfd_mach_i960_ca;
-         break;
-       case F_I960KA:
-         abfd->obj_machine = bfd_mach_i960_ka_sa;
-         break;
-         
-       }
-    break;
-#endif
-#endif
-    
-  default:                     /* Unreadable input file type */
-    abfd->obj_arch = bfd_arch_obscure;
-    break;
-  }
-  
-  if (!(internal_f->f_flags & F_RELFLG))
-    abfd->flags |= HAS_RELOC;
-  if ((internal_f->f_flags & F_EXEC))
-    abfd->flags |= EXEC_P;
-  if (!(internal_f->f_flags & F_LNNO))
-    abfd->flags |= HAS_LINENO;
-  if (!(internal_f->f_flags & F_LSYMS))
-    abfd->flags |= HAS_LOCALS;
-  
-  
-  bfd_get_symcount(abfd) = internal_f->f_nsyms;
-  if (internal_f->f_nsyms)
-    abfd->flags |= HAS_SYMS;
-  
-  coff->sym_filepos = internal_f->f_symptr;
-  
-  
-  
-  coff->symbols = (coff_symbol_type *) NULL;
-  bfd_get_start_address(abfd) = internal_f->f_opthdr ? internal_a->entry : 0;
-  
-  return abfd->xvec;
- fail:
-  bfd_release(abfd, coff);
-  return (bfd_target *)NULL;
-}
-
-static bfd_target *
-DEFUN(coff_object_p,(abfd),
-      bfd            *abfd)
-  {
-    int   nscns;
-    FILHDR filehdr;
-    AOUTHDR opthdr;
-    struct internal_filehdr internal_f;
-    struct internal_aouthdr internal_a;
-    
-    bfd_error = system_call_error;
-    
-    /* figure out how much to read */
-    if (bfd_read((PTR) &filehdr, 1, FILHSZ, abfd) != FILHSZ)
-      return 0;
-    
-    bfd_swap_filehdr_in(abfd, &filehdr, &internal_f);
-    
-    if (BADMAG(internal_f)) {
-      bfd_error = wrong_format;
-      return 0;
-    }
-    nscns =internal_f.f_nscns;
-    
-    if (internal_f.f_opthdr) {
-      if (bfd_read((PTR) &opthdr, 1,AOUTSZ, abfd) != AOUTSZ) {
-       return 0;
-      }
-      bfd_swap_aouthdr_in(abfd, &opthdr, &internal_a);
-    }
-    
-    /* Seek past the opt hdr stuff */
-    bfd_seek(abfd, internal_f.f_opthdr + FILHSZ, SEEK_SET);
-    
-    /* if the optional header is NULL or not the correct size then
-      quit; the only difference I can see between m88k dgux headers (MC88DMAGIC)
-       and Intel 960 readwrite headers (I960WRMAGIC) is that the
-         optional header is of a different size.
-
-       But the mips keeps extra stuff in it's opthdr, so dont check
-       when doing that
-           */
-    
-#ifndef MIPS    
-    if (internal_f.f_opthdr != 0 && AOUTSZ != internal_f.f_opthdr)
-      return (bfd_target *)NULL;
-#endif
-    
-    return coff_real_object_p(abfd, nscns, &internal_f, &internal_a);
-  }
-
-
-
-
-/* 
-Takes a bfd and a symbol, returns a pointer to the coff specific area
-of the symbol if there is one.
-*/
-static coff_symbol_type *
-DEFUN(coff_symbol_from,(abfd, symbol),
-      bfd            *abfd AND
-      asymbol        *symbol)
-{
-  if (symbol->the_bfd->xvec->flavour != bfd_target_coff_flavour_enum) 
-    return (coff_symbol_type *)NULL;
-
-  if (symbol->the_bfd->tdata == (PTR)NULL)
-    return (coff_symbol_type *)NULL;
-
-  return  (coff_symbol_type *) symbol;
-}
-
-
-
-
-
-
-
-static void 
-DEFUN(coff_count_linenumbers,(abfd),
-      bfd            *abfd)
-{
-    unsigned int    limit = bfd_get_symcount(abfd);
-    unsigned int    i;
-    asymbol       **p;
-    {
-       asection       *s = abfd->sections->output_section;
-       while (s) {
-           BFD_ASSERT(s->lineno_count == 0);
-           s = s->next;
-       }
-    }
-
-
-    for (p = abfd->outsymbols, i = 0; i < limit; i++, p++) {
-       asymbol        *q_maybe = *p;
-       if (q_maybe->the_bfd->xvec->flavour == bfd_target_coff_flavour_enum) {
-           coff_symbol_type *q = coffsymbol(q_maybe);
-           if (q->lineno) {
-               /*
-                  This symbol has a linenumber, increment the owning
-                  section's linenumber count
-               */
-               alent          *l = q->lineno;
-               q->symbol.section->output_section->lineno_count++;
-               l++;
-               while (l->line_number) {
-                   q->symbol.section->output_section->lineno_count++;
-                   l++;
-               }
-           }
-       }
-    }
-}
-
-/*
- This function returns true if the supplied SYMENT has an AUXENT with
- a tagndx field which should be relocated.
-
- The coff book says that all auxents have this and should be moved,
- but all the actual implementations I've looked at do this ..
- (sac@cygnus.com)
-
-*/
-static boolean
-DEFUN(uses_x_sym_x_tagndx_p,(abfd, native),
-      bfd *abfd AND
-      struct internal_syment *native)
-{
-    if (BTYPE(native->n_type) == T_STRUCT) return true;
-    if (BTYPE(native->n_type) == T_UNION)  return true;
-    if (BTYPE(native->n_type) == T_ENUM)   return true;
-    return false;
-}
-
-
-/* 
-This procedure runs through the native entries in a coff symbol table
-and links up all the elements which should point to one another, in
-particular these are:
-
-strtag, entag and untags have an auxent endindex which points to the
-first syment after the .eos. This is simple to do, we just keep a
-pointer to the symbol with the most recent pending strtag and patch it
-when we see the eos. This works since coff structs are never nested.
-
-ISFCN type entries have an endindex which points to the next static or
-extern in the table, thereby skipping the function contents.
-The coff book says that an ISFCN's tagindex
-points to the first .bf for the function, so far I havn't seen it
-used. We do this using the same mechanism as strtags.
-
-Each file entry has a value which points to the next file entry,
-the last file entry points to the first extern symbol in the table
-which is not an ISFCN.
-
-Each .bb entry points to the matching .eb entry, but these are nested
-so we keep a stack of them.
-
-The tagndx of .eos items points to the strtag attached to them, this
-is simply the last_tagndx again. 
-
-The tagndx of items with type strtag point to the defining struct.
-This bit is complicated; We know that a struct ref and def must be
-within the same file, so all the natives will be in the same vector.
-This means that we can subtracts two pointers and get the index
-differences between to items, used to work out the true index of the
-target. 
-
-We store in the name field of each syment the actual native index
-applied so we can dig it out through a pointer.  */
-
-static void 
-DEFUN(coff_mangle_symbols,(bfd_ptr),
-      bfd *bfd_ptr)
-{
-  unsigned int symbol_count = bfd_get_symcount(bfd_ptr);
-  asymbol **symbol_ptr_ptr = bfd_ptr->outsymbols;
-  struct internal_syment *last_tagndx = (struct internal_syment *)NULL;
-  struct internal_syment *last_file = (struct internal_syment *)NULL;
-  struct internal_syment *last_fcn = (struct internal_syment *)NULL;
-  struct internal_syment *block_stack[50];
-  struct internal_syment **last_block = &block_stack[0];
-  boolean first_time = true;  
-  unsigned int symbol_index;
-  unsigned int native_index = 0;
-
-  for (symbol_index = 0; symbol_index < symbol_count; symbol_index++) {
-    coff_symbol_type *coff_symbol_ptr =
-      coff_symbol_from(bfd_ptr, symbol_ptr_ptr[symbol_index]);
-    if (coff_symbol_ptr == (coff_symbol_type *)NULL) {
-      /* 
-       This symbol has no coff information in it, it will take up
-       only one slot in the output symbol table
-       */
-      native_index++;
-    }
-    else {
-      struct internal_syment *syment = coff_symbol_ptr->native;
-      if (syment == (struct internal_syment *)NULL) {
-       native_index++;
-      }
-      else {
-       /* Normalize the symbol flags */
-       if (coff_symbol_ptr->symbol.flags & BSF_FORT_COMM) {
-         /* a common symbol is undefined with a value */
-         syment->n_scnum = N_UNDEF;
-         syment->n_value = coff_symbol_ptr->symbol.value;
-       }
-       else if (coff_symbol_ptr->symbol.flags & BSF_DEBUGGING) {
-         syment->n_value = coff_symbol_ptr->symbol.value;
-       }
-       else if (coff_symbol_ptr->symbol.flags & BSF_UNDEFINED) {
-         syment->n_scnum = N_UNDEF;
-         syment->n_value = 0;
-       }         
-       else if (coff_symbol_ptr->symbol.flags & BSF_ABSOLUTE) {
-         syment->n_scnum = N_ABS;
-         syment->n_value = coff_symbol_ptr->symbol.value;
-       }         
-       else {
-         syment->n_scnum        = 
-           coff_symbol_ptr->symbol.section->output_section->index+1;
-         
-         syment->n_value = 
-           coff_symbol_ptr->symbol.value +
-             coff_symbol_ptr->symbol.section->output_offset +
-               coff_symbol_ptr->symbol.section->output_section->vma;
-       }
-       
-       
-       /* If this symbol ties up something then do it */
-
-       if (syment->n_sclass == C_FILE && last_file != (struct internal_syment *)NULL)
-         {
-            last_file->n_value = native_index;
-         }
-       else if ((syment->n_sclass == C_EXT 
-                 || syment->n_sclass == C_STAT 
-#ifdef C_LEAFEXT
-                 || syment->n_sclass == C_LEAFEXT 
-                 || syment->n_sclass == C_LEAFSTAT
-#endif
-                 )
-                && last_fcn != (struct internal_syment *)NULL) 
-           {
-             union internal_auxent *auxent = (union internal_auxent *)(last_fcn+1);
-             auxent->x_sym.x_fcnary.x_fcn.x_endndx = native_index;
-             last_fcn = (struct internal_syment *)NULL;
-             
-           }
-       else if (syment->n_sclass == C_EOS && last_tagndx != (struct internal_syment*)NULL)
-           {
-             union internal_auxent *auxent = (union internal_auxent *)(last_tagndx+1);
-             /* Remember that we keep the native index in the offset 
-                so patch the beginning of the struct to point to this
-                */
-             auxent->x_sym.x_tagndx =    last_tagndx->_n._n_n._n_offset;
-             auxent->x_sym.x_fcnary.x_fcn.x_endndx = syment->n_numaux + 1 + native_index;
-             /* Now point the eos to the structure */
-             auxent = (union internal_auxent *)(syment+1);
-             auxent->x_sym.x_tagndx =  last_tagndx->_n._n_n._n_offset;
-           }
-       else if (syment->n_sclass == C_BLOCK 
-                && coff_symbol_ptr->symbol.name[1] == 'e') 
-           {
-             union internal_auxent *auxent = (union internal_auxent *)((*(--last_block))+1);
-             auxent->x_sym.x_fcnary.x_fcn.x_endndx = native_index + syment->n_numaux + 1;
-           }
-       if (syment->n_sclass == C_EXT 
-           && !ISFCN(syment->n_type) 
-           && first_time == true 
-           && last_file != (struct internal_syment *)NULL) {
-         /* This is the first external symbol seen which isn't a 
-            function place it in the last .file entry */
-         last_file->n_value = native_index;
-         first_time = false;
-       }
-#ifdef C_LEAFPROC
-       if (syment->n_sclass == C_LEAFPROC &&
-           syment->n_numaux == 2) {
-         union internal_auxent *auxent = (union internal_auxent *)(syment+2);
-         /* This is the definition of a leaf proc, we'll relocate the 
-            address */
-         auxent->x_bal.x_balntry =       
-           coff_symbol_ptr->symbol.section->output_offset + 
-             coff_symbol_ptr->symbol.section->output_section->vma +
-               auxent->x_bal.x_balntry   ;
-       }
-#endif
-       /* If this symbol needs to be tied up then remember some facts */
-       if (syment->n_sclass == C_FILE) 
-           {
-             last_file = syment;
-           }
-       if (syment->n_numaux != 0) {
-         /*
-           If this symbol would like to point to something in the
-           future then remember where it is 
-           */
-         if (uses_x_sym_x_tagndx_p(bfd_ptr, syment)) {
-           /* 
-             If this is a ref to a structure then we'll tie it up 
-             now - there are never any forward refs for one 
-             */
-           if (syment->n_sclass == C_STRTAG ||
-               syment->n_sclass == C_ENTAG ||
-               syment->n_sclass == C_UNTAG) {
-             last_tagndx = syment;
-           }
-           else {
-             /*
-               This is a ref to a structure - the structure must
-               have been defined within the same file, and previous
-               to this point, so we can deduce the new tagndx
-               directly.
-               */
-             union internal_auxent *auxent = (union internal_auxent *)(syment+1);
-             bfd *bfd_ptr = coff_symbol_ptr->symbol.the_bfd;
-             struct internal_syment *base = obj_raw_syments(bfd_ptr);        
-             auxent->x_sym.x_tagndx = base[auxent->x_sym.x_tagndx]._n._n_n._n_offset;
-             
-             
-           }
-         }
-         if (ISFCN(syment->n_type)) {
-           last_fcn = syment;
-         }
-         if (syment->n_sclass == C_BLOCK 
-             && coff_symbol_ptr->symbol.name[1] == 'b')
-             {
-               *last_block++ = syment;
-             }
-       }
-       syment->_n._n_n._n_offset = native_index;
-       native_index = native_index + 1 + syment->n_numaux;
-      }
-    }
-  }
-}
-
-
-static void 
-DEFUN(coff_write_symbols,(abfd),
-bfd            *abfd)
-{
-  unsigned int    i;
-  unsigned int    limit = bfd_get_symcount(abfd);
-  unsigned int    written = 0;
-  struct internal_syment          dummy;
-  asymbol       **p;
-  unsigned int    string_size = 0;
-    
-    
-  /* Seek to the right place */
-  bfd_seek(abfd, obj_sym_filepos(abfd), SEEK_SET);
-    
-  /* Output all the symbols we have */
-    
-  written = 0;
-  for (p = abfd->outsymbols, i = 0; i < limit; i++, p++) {
-    asymbol        *symbol = *p;
-    coff_symbol_type *c_symbol = coff_symbol_from(abfd, symbol);
-      
-    unsigned int    j;
-    struct internal_syment         *native;
-    if (c_symbol == (coff_symbol_type *) NULL ||
-       c_symbol->native == (struct internal_syment *) NULL) {
-      /*
-       This symbol has been created by the loader, or come from a non
-       coff format. It  has no native element to inherit, make our
-       own
-       */
-       
-      native = &dummy;
-      native->n_type =  T_NULL;
-#ifdef I960
-      native->n_flags =  0;
-#endif
-      if (symbol->flags & BSF_ABSOLUTE) {
-       native->n_scnum  =  N_ABS;
-       native->n_value =  symbol->value;
-      }
-      else if (symbol->flags & (BSF_UNDEFINED | BSF_FORT_COMM)) {
-       native->n_scnum =  N_UNDEF;
-       native->n_value =  symbol->value;
-      }
-      else if (symbol->flags & BSF_DEBUGGING) {
-       /*
-         remove name so it doesn't take up any space
-         */
-       symbol->name = "";
-       continue;
-      }
-      else {
-       native->n_scnum  =   symbol->section->output_section->index +
-         1;
-       native->n_value =   symbol->value +
-         symbol->section->output_section->vma +
-           symbol->section->output_offset;
-#ifdef I960
-       /* Copy the any flags from the the file hdr into the symbol  */
-         {
-           coff_symbol_type *c = coff_symbol_from(abfd, symbol);
-           if (c != (coff_symbol_type *)NULL) {
-             native->n_flags =   c->symbol.the_bfd->flags;
-           }
-         }
-#endif
-      }
-       
-#ifdef HASPAD1
-      native->pad1[0] = 0;
-      native->pad1[0] = 0;
-#endif
-       
-      native->n_type =  0;
-      if (symbol->flags & BSF_LOCAL)
-       native->n_sclass =  C_STAT;
-      else 
-       native->n_sclass =  C_EXT;
-      native->n_numaux =  0;
-    }
-    else
-      /*
-       Does this symbol have an ascociated line number - if so then
-       make it remember this symbol index. Also tag the auxent of
-       this symbol to point to the right place in the lineno table
-       */
-       {
-         alent          *lineno = c_symbol->lineno;
-         native = c_symbol->native;
-         if (lineno) {
-           unsigned int    count = 0;
-           lineno[count].u.offset = written;
-           if (native->n_numaux) {
-             union internal_auxent  *a = (union internal_auxent *) (native + 1);
-               
-             a->x_sym.x_fcnary.x_fcn.x_lnnoptr =  
-               c_symbol->symbol.section->output_section->moving_line_filepos;
-           }
-           /*
-             And count and relocate all other linenumbers
-             */
-           count++;
-           while (lineno[count].line_number) {
-             lineno[count].u.offset +=
-               c_symbol->symbol.section->output_section->vma +
-                 c_symbol->symbol.section->output_offset;
-             count++;
-           }
-           c_symbol->symbol.section->output_section->moving_line_filepos +=
-             count * LINESZ;
-             
-         }
-       }                       /* if symbol new to coff */
-      
-    /* Fix the symbol names */
-      {
-       unsigned int    name_length;
-       if (symbol->name == (char *) NULL) {
-         /*
-           coff symbols always have names, so we'll make one up
-           */
-         symbol->name = "strange";
-       }
-       name_length = strlen(symbol->name);
-       if (name_length <= SYMNMLEN) {
-         /* This name will fit into the symbol neatly */
-         strncpy(native->_n._n_name, symbol->name, SYMNMLEN);
-       }
-       else {
-         native->_n._n_n._n_offset =  string_size + 4;
-         native->_n._n_n._n_zeroes = 0;
-         string_size += name_length + 1;
-       }
-         {
-           unsigned int    numaux = native->n_numaux;
-           int             type = native->n_type;
-           int             class =  native->n_sclass;
-           SYMENT buf;
-           bfd_coff_swap_sym_out(abfd, native, &buf);
-           bfd_write((PTR)& buf, 1, SYMESZ, abfd);
-           for (j = 0; j != native->n_numaux;
-                j++) {
-             AUXENT buf1;
-             bfd_coff_swap_aux_out(abfd,
-                                   (union internal_auxent *)(native + j + 1), type, class, &buf1);
-             bfd_write((PTR) (native + j + 1), 1, AUXESZ, abfd);
-           }
-           /*
-             Reuse somewhere in the symbol to keep the index
-             */
-           set_index(symbol, written);
-           written += 1 + numaux;
-         }
-      }
-  }                            /* for each out symbol */
-    
-  bfd_get_symcount(abfd) = written;
-  /* Now write out strings */
-    
-  if (string_size) {
-    unsigned int    size = string_size + 4;
-    size =  size;
-    bfd_write((PTR) &size, 1, sizeof(size), abfd);
-    for (p = abfd->outsymbols, i = 0; i < limit; i++, p++) {
-      asymbol        *q = *p;
-      size_t          name_length = strlen(q->name);
-      if (name_length > SYMNMLEN) {
-       bfd_write((PTR) (q->name), 1, name_length + 1, abfd);
-      }
-    }
-  }
-  else {
-    /* We would normally not write anything here, but we'll write
-       out 4 so that any stupid coff reader which tries to read
-       the string table even when there isn't one won't croak.
-       */
-      
-    uint32e_type size = 4;
-    size =  size;
-    bfd_write((PTR)&size, 1, sizeof(size), abfd);
-      
-  }
-    
-}
-
-static void 
-coff_write_relocs(abfd)
-bfd            *abfd;
-  {
-    asection       *s;
-    for (s = abfd->sections; s != (asection *) NULL; s = s->next) {
-      unsigned int    i;
-      struct external_reloc dst;
-      
-      arelent       **p = s->orelocation;
-      bfd_seek(abfd, s->rel_filepos, SEEK_SET);
-      for (i = 0; i < s->reloc_count; i++) {
-       struct internal_reloc    n;
-       arelent        *q = p[i];
-       memset((PTR)&n, 0, sizeof(n));
-       n.r_vaddr = q->address + s->vma;
-       if (q->sym_ptr_ptr) {
-         n.r_symndx = get_index((*(q->sym_ptr_ptr)));
-       }
-#ifdef SELECT_RELOC
-       /* Work out reloc type from what is required */
-       SELECT_RELOC(n.r_type, q->howto);
-#else
-       n.r_type = q->howto->type;
-#endif
-       bfd_swap_reloc_out(abfd, &n, &dst);
-       bfd_write((PTR) &n, 1, RELSZ, abfd);
-      }
-    }
-  }
-
-static void 
-DEFUN(coff_write_linenumbers,(abfd),
-      bfd            *abfd)
-  {
-    asection       *s;
-    for (s = abfd->sections; s != (asection *) NULL; s = s->next) {
-      if (s->lineno_count) {
-       asymbol       **q = abfd->outsymbols;
-       bfd_seek(abfd, s->line_filepos, SEEK_SET);
-       /* Find all the linenumbers in this section */
-       while (*q) {
-         asymbol        *p = *q;
-         alent          *l = BFD_SEND(p->the_bfd, _get_lineno, (p->the_bfd, p));
-         if (l) {
-           /* Found a linenumber entry, output */
-           struct internal_lineno  out;
-           LINENO buff;
-           bzero( (PTR)&out, sizeof(out));
-           out.l_lnno = 0;
-           out.l_addr.l_symndx = l->u.offset;
-           bfd_coff_swap_lineno_out(abfd, &out, &buff);
-           bfd_write((PTR) &buff, 1, LINESZ, abfd);
-           l++;
-           while (l->line_number) {
-             out.l_lnno = l->line_number;
-             out.l_addr.l_symndx = l->u.offset;
-             bfd_coff_swap_lineno_out(abfd, &out, &buff);
-             bfd_write((PTR) &buff, 1, LINESZ, abfd);
-             l++;
-           }
-         }
-         q++;
-       }
-      }
-    }
-  }
-
-
-static asymbol *
-coff_make_empty_symbol(abfd)
-bfd            *abfd;
-  {
-    coff_symbol_type *new = (coff_symbol_type *) bfd_alloc(abfd, sizeof(coff_symbol_type));
-    if (new == NULL) {
-      bfd_error = no_memory;
-      return (NULL);
-    }                  /* on error */
-    new->native = 0;
-    new->lineno = (alent *) NULL;
-    new->symbol.the_bfd = abfd;
-    return &new->symbol;
-  }
-
-static void 
-coff_print_symbol(ignore_abfd, file, symbol, how)
-bfd            *ignore_abfd;
-FILE           *file;
-asymbol        *symbol;
-bfd_print_symbol_enum_type how;
-  {
-    switch (how) {
-    case bfd_print_symbol_name_enum:
-      fprintf(file, "%s", symbol->name);
-      break;
-    case bfd_print_symbol_type_enum:
-      fprintf(file, "coff %lx %lx", (unsigned long) coffsymbol(symbol)->native,
-             (unsigned long) coffsymbol(symbol)->lineno);
-      break;
-    case bfd_print_symbol_all_enum:
-       {
-         CONST char           *section_name = symbol->section == (asection *) NULL ?
-           "*abs" : symbol->section->name;
-         bfd_print_symbol_vandf((PTR) file, symbol);
-         
-         fprintf(file, " %-5s %s %s %s",
-                 section_name,
-                 coffsymbol(symbol)->native ? "n" : "g",
-                 coffsymbol(symbol)->lineno ? "l" : " ",
-                 symbol->name);
-       }
-      
-      
-      break;
-    }
-  }
-
-static alent   *
-coff_get_lineno(ignore_abfd, symbol)
-bfd            *ignore_abfd;
-asymbol        *symbol;
-  {
-    return coffsymbol(symbol)->lineno;
-  }
-
-/*
-Set flags and magic number of a coff file from architecture and machine
-type.  Result is true if we can represent the arch&type, false if not.
-*/
-static          boolean
-coff_set_flags(abfd, magicp, flagsp)
-bfd            *abfd;
-unsigned       *magicp,
-*flagsp;
-  {
-    
-    switch (abfd->obj_arch) {
-      
-#ifdef I960ROMAGIC
-      
-    case bfd_arch_i960:
-      
-       {
-         unsigned        flags;
-         *magicp = I960ROMAGIC;
-         /*
-           ((bfd_get_file_flags(abfd) & WP_TEXT) ? I960ROMAGIC :
-            I960RWMAGIC);   FIXME???
-              */
-         switch (abfd->obj_machine) {
-         case bfd_mach_i960_core:
-           flags = F_I960CORE;
-           break;
-         case bfd_mach_i960_kb_sb:
-           flags = F_I960KB;
-           break;
-         case bfd_mach_i960_mc:
-           flags = F_I960MC;
-           break;
-         case bfd_mach_i960_xa:
-           flags = F_I960XA;
-           break;
-         case bfd_mach_i960_ca:
-           flags = F_I960CA;
-           break;
-         case bfd_mach_i960_ka_sa:
-           flags = F_I960KA;
-           break;
-         default:
-           return false;
-         }
-         *flagsp = flags;
-         return true;
-       }
-       break;
-#endif
-#ifdef MIPS
-      case bfd_arch_mips:
-         *magicp = MIPS_MAGIC_2;
-       return true;
-       break;
-#endif
-#ifdef MC68MAGIC
-      case bfd_arch_m68k:
-       *magicp = MC68MAGIC;
-       return true;
-#endif
-       
-#ifdef MC88MAGIC
-      case bfd_arch_m88k:
-       *magicp = MC88OMAGIC;
-       return true;
-       break;
-#endif
-       
-      default:         /* Unknown architecture */
-       return false;
-      }
-    
-    return false;
-  }
-
-
-static          boolean
-coff_set_arch_mach(abfd, arch, machine)
-bfd            *abfd;
-enum bfd_architecture arch;
-unsigned long   machine;
-  {
-    unsigned        dummy1,
-    dummy2;
-    abfd->obj_arch = arch;
-    abfd->obj_machine = machine;
-    if (arch != bfd_arch_unknown &&
-       coff_set_flags(abfd, &dummy1, &dummy2) != true)
-      return false;            /* We can't represent this type */
-    return true;       /* We're easy ... */
-  }
-
-
-/* Calculate the file position for each section. */
-
-static void 
-coff_compute_section_file_positions(abfd)
-bfd            *abfd;
-  {
-    asection       *current;
-    file_ptr        sofar = FILHSZ;
-    if (bfd_get_start_address(abfd)) {
-      /*
-       A start address may have been added to the original file. In this
-       case it will need an optional header to record it.
-         */
-      abfd->flags |= EXEC_P;
-    }
-    if (abfd->flags & EXEC_P)
-      sofar += AOUTSZ;
-    
-    
-    sofar += abfd->section_count * SCNHSZ;
-    
-    for (current = abfd->sections; current != NULL; current =
-        current->next) {
-      /* Only deal with sections which have contents */
-      if (!(current->flags & SEC_HAS_CONTENTS))
-       continue;
-      
-      /* Align the sections in the file to the same boundary on 
-       which they are aligned in virtual memory.  I960 doesn't
-         do this (FIXME) so we can stay in sync with Intel.  960
-           doesn't yet page from files... */
-#ifndef I960
-      sofar = ALIGN(sofar, 1 << current->alignment_power);
-#endif
-      /* FIXME, in demand paged files, the low order bits of the file
-       offset must match the low order bits of the virtual address.
-         "Low order" is apparently implementation defined.  Add code
-           here to round sofar up to match the virtual address.  */
-      
-      current->filepos = sofar;
-      sofar += current->size;
-    }
-    obj_relocbase(abfd) = sofar;
-  }
-
-
-
-
-/* SUPPRESS 558 */
-/* SUPPRESS 529 */
-static          boolean
-DEFUN(coff_write_object_contents,(abfd),
-bfd            *abfd)
-{
-  asection       *current;
-  boolean         hasrelocs = false;
-  boolean         haslinno = false;
-  file_ptr        reloc_base;
-  file_ptr        lineno_base;
-  file_ptr        sym_base;
-  file_ptr        scn_base;
-  file_ptr        data_base;
-  unsigned long   reloc_size = 0;
-  unsigned long   lnno_size = 0;
-  asection       *text_sec = NULL;
-  asection       *data_sec = NULL;
-  asection       *bss_sec = NULL;
-
-  struct internal_filehdr internal_f;
-  struct internal_aouthdr internal_a;
-    
-  struct icofdata *coff = obj_icof(abfd);
-    
-    
-  bfd_error = system_call_error;
-    
-    
-  if(abfd->output_has_begun == false) {
-    coff_compute_section_file_positions(abfd);
-  }
-    
-  if (abfd->sections != (asection *)NULL) {
-    scn_base = abfd->sections->filepos;
-  }
-  else {
-    scn_base = 0;
-  }
-  if (bfd_seek(abfd, scn_base, SEEK_SET) != 0)
-    return false;
-  reloc_base = obj_relocbase(abfd);
-    
-  /* Make a pass through the symbol table to count line number entries and
-     put them into the correct asections */
-    
-  coff_count_linenumbers(abfd);
-  data_base = scn_base;
-    
-  /* Work out the size of the reloc and linno areas */
-    
-  for (current = abfd->sections; current != NULL; current = current->next) {
-    reloc_size += current->reloc_count * RELSZ;
-    lnno_size += current->lineno_count * LINESZ;
-    data_base += SCNHSZ;
-  }
-    
-  lineno_base = reloc_base + reloc_size;
-  sym_base = lineno_base + lnno_size;
-    
-  /* Indicate in each section->line_filepos its actual file address */
-  for (current = abfd->sections; current != NULL; current = current->next) {
-    if (current->lineno_count) {
-      current->line_filepos = lineno_base;
-      current->moving_line_filepos = lineno_base;
-      lineno_base += current->lineno_count * LINESZ;
-    }
-    else {
-      current->line_filepos = 0;
-    }
-    if (current->reloc_count) {
-      current->rel_filepos = reloc_base;
-      reloc_base += current->reloc_count * sizeof(struct internal_reloc);
-    }
-    else {
-      current->rel_filepos = 0;
-    }
-  }
-    
-  /* Write section headers to the file.  */
-    
-  bfd_seek(abfd,
-          (file_ptr) ((abfd->flags & EXEC_P) ?
-                      (FILHSZ + AOUTSZ) : FILHSZ),
-          SEEK_SET);
-    
-    {
-#if 0
-      unsigned int    pad = abfd->flags & D_PAGED ? data_base : 0;
-#endif
-      unsigned int    pad = 0;
-       
-      for (current = abfd->sections; current != NULL; current = current->next) {
-       struct internal_scnhdr section;
-       strncpy(&(section.s_name[0]), current->name, 8);
-       section.s_vaddr = current->vma + pad;
-       section.s_paddr = current->vma + pad;
-       section.s_size = current->size - pad;
-       /*
-         If this section has no size or is unloadable then the scnptr
-         will be 0 too
-         */
-       if (current->size - pad == 0 ||
-           (current->flags & SEC_LOAD) == 0) {
-         section.s_scnptr = 0;
-           
-       }
-       else {
-         section.s_scnptr = current->filepos;
-       }
-       section.s_relptr = current->rel_filepos;
-       section.s_lnnoptr = current->line_filepos;
-       section.s_nreloc = current->reloc_count;
-       section.s_nlnno = current->lineno_count;
-       if (current->reloc_count != 0)
-         hasrelocs = true;
-       if (current->lineno_count != 0)
-         haslinno = true;
-         
-       if (!strcmp(current->name, _TEXT)) {
-         text_sec = current;
-         section.s_flags = STYP_TEXT; /* kinda stupid */
-       }
-       else if (!strcmp(current->name, _DATA)) {
-         data_sec = current;
-         section.s_flags = STYP_DATA; /* kinda stupid */
-       }
-       else if (!strcmp(current->name, _BSS)) {
-         bss_sec = current;
-         section.s_flags = STYP_BSS; /* kinda stupid */
-       }
-         
-         
-#ifdef I960
-       section.s_align = (current->alignment_power
-                          ? 1 << current->alignment_power
-                          : 0);
-
-#endif
-         {
-           SCNHDR          buff;
-
-           swap_scnhdr_out(abfd, &section, &buff);
-           bfd_write((PTR) (&buff), 1, SCNHSZ, abfd);
-
-         }
-       pad = 0;
-      }
-    }
-
-  /* OK, now set up the filehdr... */
-  internal_f.f_nscns = abfd->section_count;
-  /*
-    We will NOT put a fucking timestamp in the header here. Every time you
-    put it back, I will come in and take it out again. I'm sorry. This
-    field does not belong here.  We fill it with a 0 so it compares the
-    same but is not a reasonable time. -- gnu@cygnus.com
-    */
-  /*
-    Well, I like it, so I'm conditionally compiling it in.
-    steve@cygnus.com
-    */
-#ifdef COFF_TIMESTAMP
-  internal_f.f_timdat = time(0);
-#else
-  internal_f.f_timdat = 0;
-#endif
-
-  if (bfd_get_symcount(abfd) != 0)
-    internal_f.f_symptr = sym_base;
-  else
-    internal_f.f_symptr = 0;
-
-  internal_f.f_flags = 0;
-
-  if (abfd->flags & EXEC_P)
-    internal_f.f_opthdr = AOUTSZ;
-  else
-    internal_f.f_opthdr = 0;
-
-  if (!hasrelocs)
-    internal_f.f_flags |= F_RELFLG;
-  if (!haslinno)
-    internal_f.f_flags |= F_LNNO;
-  if (0 == bfd_get_symcount(abfd))
-    internal_f.f_flags |= F_LSYMS;
-  if (abfd->flags & EXEC_P)
-    internal_f.f_flags |= F_EXEC;
-#if M88
-  internal_f.f_flags |= F_AR32W;
-#else
-  if (!abfd->xvec->byteorder_big_p)
-    internal_f.f_flags |= F_AR32WR;
-#endif
-  /*
-    FIXME, should do something about the other byte orders and
-    architectures.
-    */
-
-  /* Set up architecture-dependent stuff */
-
-    { int   magic = 0;
-      int   flags = 0;
-      coff_set_flags(abfd, &magic, &flags);
-      internal_f.f_magic = magic;
-      internal_f.f_flags = flags;
-
-      /* ...and the "opt"hdr... */
-
-#ifdef I960
-      internal_a.magic = (magic == I960ROMAGIC ? NMAGIC : OMAGIC); 
-#endif
-#if M88
-      internal_a.magic = PAGEMAGICBCS;
-#endif
-    }
-  /* Now should write relocs, strings, syms */
-  obj_sym_filepos(abfd) = sym_base;
-
-  if (bfd_get_symcount(abfd) != 0) {
-    coff_mangle_symbols(abfd);
-    coff_write_symbols(abfd);
-    coff_write_linenumbers(abfd);
-    coff_write_relocs(abfd);
-  }
-  if (text_sec) {
-    internal_a.tsize = text_sec->size;
-    internal_a.text_start =text_sec->size ? text_sec->vma : 0;
-  }
-  if (data_sec) {
-    internal_a.dsize = data_sec->size;
-    internal_a.data_start = data_sec->size ? data_sec->vma      : 0;
-  }
-  if (bss_sec) {
-    internal_a.bsize =  bss_sec->size;
-  }
-
-  internal_a.entry = bfd_get_start_address(abfd);
-  internal_f.f_nsyms =  bfd_get_symcount(abfd);
-
-  /* now write them */
-  if (bfd_seek(abfd, 0L, SEEK_SET) != 0)
-    return false;
-    {
-      FILHDR buff;
-      bfd_swap_filehdr_out(abfd, &internal_f, &buff);
-      bfd_write((PTR) &buff, 1, FILHSZ, abfd);
-    }
-  if (abfd->flags & EXEC_P) {
-    AOUTHDR buff;
-    bfd_swap_aouthdr_out(abfd, &internal_a, &buff);
-    bfd_write((PTR) &buff, 1, AOUTSZ, abfd);
-  }
-  return true;
-}
-
-static          boolean
-coff_set_section_contents(abfd, section, location, offset, count)
-    bfd            *abfd;
-    sec_ptr         section;
-    PTR             location;
-    file_ptr        offset;
-    size_t          count;
-{
-    if (abfd->output_has_begun == false)       /* set by bfd.c handler */
-       coff_compute_section_file_positions(abfd);
-
-    bfd_seek(abfd, (file_ptr) (section->filepos + offset), SEEK_SET);
-
-    if (count != 0) {
-       return (bfd_write(location, 1, count, abfd) == count) ? true : false;
-    }
-    return true;
-}
-
-static          boolean
-coff_close_and_cleanup(abfd)
-    bfd            *abfd;
-{
-  if (!bfd_read_p(abfd))
-    switch (abfd->format) {
-    case bfd_archive:
-      if (!_bfd_write_archive_contents(abfd))
-       return false;
-      break;
-    case bfd_object:
-      if (!coff_write_object_contents(abfd))
-       return false;
-      break;
-    default:
-      bfd_error = invalid_operation;
-      return false;
-    }
-
-  /* We depend on bfd_close to free all the memory on the obstack.  */
-  /* FIXME if bfd_release is not using obstacks! */
-  return true;
-}
-
-
-static PTR 
-buy_and_read(abfd, where, seek_direction, size)
-    bfd            *abfd;
-    file_ptr        where;
-    int             seek_direction;
-    size_t          size;
-{
-    PTR             area = (PTR) bfd_alloc(abfd, size);
-    if (!area) {
-       bfd_error = no_memory;
-       return (NULL);
-    }
-    bfd_seek(abfd, where, seek_direction);
-    if (bfd_read(area, 1, size, abfd) != size) {
-       bfd_error = system_call_error;
-       return (NULL);
-    }                          /* on error */
-    return (area);
-}                              /* buy_and_read() */
-
-static void 
-DEFUN(offset_symbol_indices,(abfd, symtab, count, offset),
-      bfd *abfd AND
-      struct internal_syment         *symtab AND
-      unsigned long   count AND
-      long            offset)
-{
-  struct internal_syment         *end = symtab + count;
-  for (; symtab < end; ++symtab) {
-    if (symtab->n_sclass == C_FILE) {
-      symtab->n_value = 0;
-    }
-    else if (symtab->n_sclass == C_ALIAS) {
-      /*
-       These guys have indices in their values.
-       */
-      symtab->n_value = symtab->n_value + offset;
-    }
-    else if (symtab->n_numaux) {
-      /*
-       anybody else without an aux, has no indices.
-       */
-      
-      if (symtab->n_sclass == C_EOS
-         || (BTYPE(symtab->n_type) == T_STRUCT
-             && symtab->n_sclass != C_STRTAG)
-         || BTYPE(symtab->n_type) == T_UNION
-         || BTYPE(symtab->n_type) == T_ENUM) {
-       /* If the tagndx is 0 then the struct hasn't really been
-          defined, so leave it alone */
-       
-       if(((union internal_auxent *) (symtab + 1))->x_sym.x_tagndx != 0) {
-         ((union internal_auxent *) (symtab + 1))->x_sym.x_tagndx += offset;
-       }
-       
-      }                                /* These guys have a tagndx */
-      if (symtab->n_sclass == C_STRTAG
-         || symtab->n_sclass == C_UNTAG
-         || symtab->n_sclass == C_ENTAG
-         || symtab->n_sclass == C_BLOCK
-         || symtab->n_sclass == C_FCN
-         || ISFCN(symtab->n_type)) {
-       
-       ((union internal_auxent *) (symtab +
-                                   1))->x_sym.x_fcnary.x_fcn.x_endndx
-                                     += offset;
-       
-      }                                /* These guys have an endndx */
-#ifndef I960
-      if (ISFCN(symtab->n_type)) {
-       ((union internal_auxent *) (symtab + 1))->x_sym.x_tvndx += offset;
-      }                                /* These guys have a tvndx.  I think...
-                                  (FIXME) */
-#endif                         /* Not I960 */
-      
-    }                          /* if value, else if aux */
-    symtab += symtab->n_numaux;
-  }                            /* walk the symtab */
-  
-  return;
-}                              /* offset_symbol_indices() */
-
-#if 0
-/* swap the entire symbol table - we c*/
-static void 
-swap_raw_symtab(abfd, raw_symtab)
-bfd            *abfd;
-SYMENT         *raw_symtab;
-  {
-    long            i;
-    SYMENT         *end = raw_symtab + bfd_get_symcount(abfd);
-    for (; raw_symtab < end; ++raw_symtab) {
-      bfd_coff_swap_sym(abfd, raw_symtab);
-      
-      for (i = raw_symtab->n_numaux; i; --i, ++raw_symtab) {
-       bfd_coff_swap_aux(abfd,
-                         (AUXENT *)(raw_symtab + 1),
-                         raw_symtab->n_type,
-                         raw_symtab->n_sclass);
-      }                                /* swap all the aux entries */
-    }                          /* walk the symbol table */
-    
-    return;
-  }                            /* swap_raw_symtab() */
-#endif
-/*
-read a symbol table into freshly mallocated memory, swap it, and knit the
-symbol names into a normalized form. By normalized here I mean that all
-symbols have an n_offset pointer that points to a NULL terminated string.
-Oh, and the first symbol MUST be a C_FILE.  If there wasn't one there
-before, put one there.
-*/
-
-static struct internal_syment  *
-DEFUN(get_normalized_symtab,(abfd),
-bfd            *abfd)
-{
-
-  struct internal_syment         *internal;
-  struct internal_syment         *internal_ptr;
-  struct internal_syment         *internal_end;
-  SYMENT *raw;
-  SYMENT *raw_src;
-  SYMENT *raw_end;
-  char           *string_table = NULL;
-  unsigned long   size;
-  char string_table_size_buffer[4];
-  unsigned long   string_table_size = 0;
-  unsigned int raw_size;
-  if (obj_raw_syments(abfd) != (struct internal_syment *)NULL) {
-    return obj_raw_syments(abfd);
-  }
-  if ((size = bfd_get_symcount(abfd) * sizeof(struct internal_syment)) == 0) {
-    bfd_error = no_symbols;
-    return (NULL);
-  }
-
-  internal = (struct internal_syment *)bfd_alloc(abfd, size);
-  internal_end = internal + bfd_get_symcount(abfd);
-
-  raw_size =      bfd_get_symcount(abfd) * SYMESZ;
-  raw = (SYMENT *)bfd_alloc(abfd,raw_size);
-
-  if (bfd_seek(abfd, obj_sym_filepos(abfd), SEEK_SET) == -1
-      || bfd_read((PTR)raw, raw_size, 1, abfd) != raw_size) {
-    bfd_error = system_call_error;
-    return (NULL);
-  }
-  /* mark the end of the symbols */
-  raw_end = raw + bfd_get_symcount(abfd);
-  /*
-    FIXME SOMEDAY.  A string table size of zero is very weird, but
-    probably possible.  If one shows up, it will probably kill us.
-    */
-
-  /* Swap all the raw entries */
-  for (raw_src = raw, internal_ptr = internal; raw_src < raw_end; raw_src++, internal_ptr++) {
-    unsigned int i;
-    bfd_coff_swap_sym_in(abfd, raw_src,internal_ptr);    
-    for (i = internal_ptr->n_numaux; i; --i, raw_src++, internal_ptr++) {
-      bfd_coff_swap_aux_in(abfd, (AUXENT *)(raw_src +1), internal_ptr->n_type,
-                          internal_ptr->n_sclass, (union
-                                                   internal_auxent *)(internal_ptr +1));
-    }
-  }
-      
-  /* Free all the raw stuff */
-  bfd_release(abfd, raw_src);
-
-  for (internal_ptr = internal; internal_ptr < internal_end; internal_ptr ++) {
-
-    if (internal_ptr->_n._n_n._n_zeroes != 0) {
-      /*
-       This is a "short" name.  Make it long.
-       */
-      unsigned long   i = 0;
-      char           *newstring = NULL;
-      /*
-       find the length of this string without walking into memory
-       that isn't ours.
-       */
-       
-      for (i = 0; i < 8; ++i) {
-       if (internal_ptr->_n._n_name[i] == '\0') {
-         break;
-       }                       /* if end of string */
-      }                                /* possible lengths of this string. */
-       
-      if ((newstring = (PTR) bfd_alloc(abfd, ++i)) == NULL) {
-       bfd_error = no_memory;
-       return (NULL);
-      }                                /* on error */
-      bzero(newstring, i);
-      strncpy(newstring, internal_ptr->_n._n_name, i-1);
-      internal_ptr->_n._n_n._n_offset =  (int) newstring;
-      internal_ptr->_n._n_n._n_zeroes = 0;
-       
-    }
-    else {
-      if (string_table == NULL) {
-       /*
-         NOTE: we don't read the string table until now because we
-         don't necessarily know that we have one until now.
-         */
-       /*
-         At this point we should be "seek"'d to the end of the
-         symbols === the symbol table size.
-         */
-         
-       if (bfd_read((char *) string_table_size_buffer,
-                    sizeof(string_table_size_buffer),
-                    1, abfd) != sizeof(string_table_size)) {
-         bfd_error = system_call_error;
-         return (NULL);
-       }                       /* on error */
-         
-       string_table_size = bfd_h_getlong(abfd, string_table_size_buffer);
-         
-       if ((string_table = (PTR) bfd_alloc(abfd, string_table_size -= 4)) == NULL) {
-         bfd_error = no_memory;
-         return (NULL);
-       }                       /* on mallocation error */
-       if (bfd_read(string_table, string_table_size, 1, abfd) != string_table_size) {
-         bfd_error = system_call_error;
-         return (NULL);
-       }                       /* on error */
-      }                                /* have not yet read the string table. */
-      /*
-       This is a long name already. Just point it at the string in
-       memory.
-       */
-      internal_ptr->_n._n_n._n_offset = (int) (string_table - 4 +  internal_ptr->_n._n_n._n_offset);
-
-    }                          /* switch on type of symbol name */
-      
-    internal_ptr += internal_ptr->n_numaux;
-  }                            /* for each symbol */
-#if 0
-#ifndef GNU960
-  /* I'm not sure of the repercussions of this, so the Intel
-     folks will always do the force
-     */
-  if (obj_symbol_slew(abfd) > 0) 
-    force_indices_file_symbol_relative(abfd, internal);
-#else
-  force_indices_file_symbol_relative(abfd, internal);
-#endif
-#endif
-  obj_raw_syments(abfd) = internal;
-  obj_string_table(abfd) = string_table;
-    
-  return (internal);
-}                              /* get_normalized_symtab() */
-
-static
-struct sec *
-DEFUN(section_from_bfd_index,(abfd, index),
-      bfd            *abfd AND
-      int             index)
-{
-  if (index > 0) {
-    struct sec *answer = abfd->sections;
-    while (--index) {
-      answer = answer->next;
-    }
-    return answer;
-  }
-  return 0;
-}
-
-
-
-
-static boolean
-coff_slurp_line_table(abfd, asect)
-bfd            *abfd;
-asection       *asect;
-  {
-    LINENO  *native_lineno;
-    alent          *lineno_cache;
-    
-    BFD_ASSERT(asect->lineno == (alent *) NULL);
-    
-    native_lineno = (LINENO *) buy_and_read(abfd,
-                                           asect->line_filepos,
-                                           SEEK_SET,
-                                           (size_t) (LINESZ *
-                                                     asect->lineno_count));
-    lineno_cache =
-      (alent *) bfd_alloc(abfd, (size_t) ((asect->lineno_count + 1) * sizeof(alent)));
-    if (lineno_cache == NULL) {
-      bfd_error = no_memory;
-      return false;
-    } else {   
-      unsigned int    counter = 0;
-      alent          *cache_ptr = lineno_cache;
-      LINENO  *src = native_lineno;
-      
-      while (counter < asect->lineno_count) {
-       struct internal_lineno dst;
-       bfd_coff_swap_lineno_in(abfd, src, &dst);
-       cache_ptr->line_number = dst.l_lnno;
-       
-       if (cache_ptr->line_number == 0) {
-         coff_symbol_type *sym =
-           (coff_symbol_type *) (dst.l_addr.l_symndx
-                                 + obj_symbol_slew(abfd)
-                                 + obj_raw_syments(abfd))->_n._n_n._n_zeroes;
-         cache_ptr->u.sym = (asymbol *) sym;
-         sym->lineno = cache_ptr;
-       }
-       else {
-         cache_ptr->u.offset = dst.l_addr.l_paddr
-           - bfd_section_vma(abfd, asect);
-       }                               /* If no linenumber expect a symbol index */
-       
-       cache_ptr++;
-       src++;
-       counter++;
-      }
-      cache_ptr->line_number = 0;
-      
-    }
-    asect->lineno = lineno_cache;
-    /* FIXME, free native_lineno here, or use alloca or something. */
-    return true;
-  }                            /* coff_slurp_line_table() */
-
-static struct internal_syment  *
-DEFUN(find_next_file_symbol,(abfd, current, end),
-      bfd *abfd AND
-      struct internal_syment *current AND
-      struct internal_syment *end)
-{
-  current += current->n_numaux + 1;
-    
-  while (current < end) {
-    if (current->n_sclass== C_FILE) {
-      return (current);
-    }  
-    current += current->n_numaux + 1;
-  }
-  return end;
-}
-
-
-/*
-Note that C_FILE symbols can, and some do, have more than 1 aux entry.
-*/
-
-static void
-DEFUN(force_indices_file_symbol_relative,(abfd, symtab),
-      bfd            *abfd AND
-     struct internal_syment         *symtab)
-{
-  struct internal_syment         *end = symtab + bfd_get_symcount(abfd);
-  struct internal_syment         *current;
-  struct internal_syment         *next;
-  /* the first symbol had damn well better be a C_FILE. */
-  BFD_ASSERT(symtab->n_sclass == C_FILE);
-    
-  for (current = find_next_file_symbol(abfd, symtab, end);
-       current < end;
-       current = next) {
-    offset_symbol_indices(abfd, current,
-                         ((next =
-                           find_next_file_symbol(abfd, current,
-                                                 end)) - current),
-                         symtab - current);
-  }
-  return;
-}      
-
-static          boolean
-DEFUN(coff_slurp_symbol_table,(abfd),
-      bfd            *abfd)
-  {
-    struct internal_syment         *native_symbols;
-    coff_symbol_type *cached_area;
-    unsigned int   *table_ptr;
-    
-    unsigned int    number_of_symbols = 0;
-    if (obj_symbols(abfd))
-      return true;
-    bfd_seek(abfd, obj_sym_filepos(abfd), SEEK_SET);
-    
-    /* Read in the symbol table */
-    if ((native_symbols = get_normalized_symtab(abfd)) == NULL) {
-      return (false);
-    }                          /* on error */
-    
-    
-    /* Allocate enough room for all the symbols in cached form */
-    cached_area =
-      (coff_symbol_type *)
-       bfd_alloc(abfd, (size_t) (bfd_get_symcount(abfd) * sizeof(coff_symbol_type)));
-    
-    if (cached_area == NULL) {
-      bfd_error = no_memory;
-      return false;
-    }                          /* on error */
-    table_ptr =
-      (unsigned int *)
-       bfd_alloc(abfd, (size_t) (bfd_get_symcount(abfd) * sizeof(unsigned int)));
-    
-    if (table_ptr == NULL) {
-      bfd_error = no_memory;
-      return false;
-    } else {
-      coff_symbol_type *dst = cached_area;
-      unsigned int    last_native_index = bfd_get_symcount(abfd);
-      unsigned int    this_index = 0;
-      while (this_index < last_native_index) {
-       struct internal_syment         *src = native_symbols + this_index;
-       table_ptr[this_index] = number_of_symbols;
-       dst->symbol.the_bfd = abfd;
-       
-       dst->symbol.name = (char *)(src->_n._n_n._n_offset);
-       /*
-         We use the native name field to point to the cached field
-           */
-       src->_n._n_n._n_zeroes = (int) dst;
-       dst->symbol.section = section_from_bfd_index(abfd,
-                                                    src->n_scnum);
-       switch (src->n_sclass) {
-#ifdef I960
-       case C_LEAFEXT:
-#if 0
-         dst->symbol.value = src->n_value - dst->symbol.section->vma;
-         dst->symbol.flags = BSF_EXPORT | BSF_GLOBAL;
-         dst->symbol.flags |= BSF_NOT_AT_END;
-#endif
-         /* Fall through to next case */
-         
-#endif
-         
-       case C_EXT:
-         if ((src->n_scnum) == 0) {
-           if ((src->n_value) == 0) {
-             dst->symbol.flags = BSF_UNDEFINED;
-             dst->symbol.value= 0;
-           }
-           else {
-             dst->symbol.flags = BSF_FORT_COMM;
-             dst->symbol.value = (src->n_value);
-           }
-         }
-         else {
-           /*
-             Base the value as an index from the base of the
-               section
-                 */
-           if (dst->symbol.section == (asection *) NULL) {
-             dst->symbol.flags = BSF_EXPORT | BSF_GLOBAL | BSF_ABSOLUTE;
-             dst->symbol.value = src->n_value;
-           }
-           else {
-             dst->symbol.flags = BSF_EXPORT | BSF_GLOBAL;
-             dst->symbol.value = src->n_value - dst->symbol.section->vma;
-           }
-           if (ISFCN((src->n_type))) {
-             /*
-               A function ext does not go at the end of a file
-                 */
-             dst->symbol.flags |= BSF_NOT_AT_END;
-           }
-         }
-         
-         break;
-       case C_STAT:                    /* static                        */
-#ifdef I960
-       case C_LEAFSTAT:                /* static leaf procedure        */
-#endif
-       case C_LABEL:                   /* label                         */
-         dst->symbol.flags = BSF_LOCAL;
-         /*
-           Base the value as an index from the base of the section
-             */
-         dst->symbol.value = (src->n_value) - dst->symbol.section->vma;
-         break;
-         
-       case C_MOS:                     /* member of structure   */
-       case C_EOS:                     /* end of structure              */
-       case C_REGPARM:                 /* register parameter            */
-       case C_REG:                     /* register variable             */
-#ifdef C_AUTOARG
-       case C_AUTOARG:                 /* 960-specific storage class */
-#endif
-       case C_TPDEF:                   /* type definition               */
-         
-       case C_ARG:
-       case C_AUTO:                    /* automatic variable */
-       case C_FIELD:                   /* bit field */
-       case C_ENTAG:                   /* enumeration tag               */
-       case C_MOE:                     /* member of enumeration         */
-       case C_MOU:                     /* member of union               */
-       case C_UNTAG:                   /* union tag                     */
-         
-         dst->symbol.flags = BSF_DEBUGGING;
-         dst->symbol.value = (src->n_value);
-         break;
-         
-       case C_FILE:                    /* file name                     */
-       case C_STRTAG:                  /* structure tag                 */
-         dst->symbol.flags = BSF_DEBUGGING;
-         dst->symbol.value = (src->n_value);
-         
-         break;
-       case C_BLOCK:                   /* ".bb" or ".eb"                */
-       case C_FCN:                     /* ".bf" or ".ef"                */
-         dst->symbol.flags = BSF_LOCAL;
-         /*
-           Base the value as an index from the base of the section
-             */
-         dst->symbol.value = (src->n_value) - dst->symbol.section->vma;
-         
-         break;
-       case C_EFCN:                    /* physical end of function      */
-       case C_NULL:
-       case C_EXTDEF:                  /* external definition           */
-       case C_ULABEL:                  /* undefined label               */
-       case C_USTATIC:                 /* undefined static              */
-       case C_LINE:                    /* line # reformatted as symbol table entry */
-       case C_ALIAS:                   /* duplicate tag                 */
-       case C_HIDDEN:                  /* ext symbol in dmert public lib */
-         
-       default:
-         
-         abort();
-         dst->symbol.flags = BSF_DEBUGGING;
-         dst->symbol.value = (src->n_value);
-         
-         break;
-       }
-       
-       BFD_ASSERT(dst->symbol.flags != 0);
-       
-       dst->native = src;
-       
-       dst->symbol.udata = 0;
-       dst->lineno = (alent *) NULL;
-       this_index += (src->n_numaux) + 1;
-       dst++;
-       number_of_symbols++;
-      }                                /* walk the native symtab */
-    }                          /* bfdize the native symtab */
-    
-    obj_symbols(abfd) = cached_area;
-    obj_raw_syments(abfd) = native_symbols;
-    
-    bfd_get_symcount(abfd) = number_of_symbols;
-    obj_convert(abfd) = table_ptr;
-    /* Slurp the line tables for each section too */
-      {
-       asection       *p;
-       p = abfd->sections;
-       while (p) {
-         coff_slurp_line_table(abfd, p);
-         p = p->next;
-       }
-      }
-    return true;
-  }                            /* coff_slurp_symbol_table() */
-
-static unsigned int
-coff_get_symtab_upper_bound(abfd)
-bfd            *abfd;
-  {
-    if (!coff_slurp_symbol_table(abfd))
-      return 0;
-    
-    return (bfd_get_symcount(abfd) + 1) * (sizeof(coff_symbol_type *));
-  }
-
-
-static unsigned int
-coff_get_symtab(abfd, alocation)
-bfd            *abfd;
-asymbol       **alocation;
-  {
-    unsigned int    counter = 0;
-    coff_symbol_type *symbase;
-    coff_symbol_type **location = (coff_symbol_type **) (alocation);
-    if (!coff_slurp_symbol_table(abfd))
-      return 0;
-    
-    for (symbase = obj_symbols(abfd); counter++ < bfd_get_symcount(abfd);)
-      *(location++) = symbase++;
-    *location++ = 0;
-    return bfd_get_symcount(abfd);
-  }
-
-static unsigned int
-coff_get_reloc_upper_bound(abfd, asect)
-bfd            *abfd;
-sec_ptr         asect;
-  {
-    if (bfd_get_format(abfd) != bfd_object) {
-      bfd_error = invalid_operation;
-      return 0;
-    }
-    return (asect->reloc_count + 1) * sizeof(arelent *);
-  }
-
-static          boolean
-DEFUN(coff_slurp_reloc_table,(abfd, asect, symbols),
-      bfd            *abfd AND
-      sec_ptr         asect AND
-      asymbol       **symbols)
-  {
-    RELOC   *native_relocs;
-    arelent        *reloc_cache;
-    if (asect->relocation)
-      return true;
-    if (asect->reloc_count == 0)
-      return true;
-    if (!coff_slurp_symbol_table(abfd))
-      return false;
-    native_relocs =
-      (RELOC *) buy_and_read(abfd,
-                            asect->rel_filepos,
-                            SEEK_SET,
-                            (size_t) (RELSZ *
-                                      asect->reloc_count));
-    reloc_cache = (arelent *)
-      bfd_alloc(abfd, (size_t) (asect->reloc_count * sizeof(arelent)));
-    
-    if (reloc_cache == NULL) {
-      bfd_error = no_memory;
-      return false;
-    } {                                /* on error */
-      arelent        *cache_ptr;
-      RELOC   *src;
-      for (cache_ptr = reloc_cache,
-          src = native_relocs;
-          cache_ptr < reloc_cache + asect->reloc_count;
-          cache_ptr++,
-          src++) {
-       struct internal_reloc dst;
-       asymbol        *ptr;
-       bfd_swap_reloc_in(abfd, src, &dst);
-       dst.r_symndx += obj_symbol_slew(abfd);
-       cache_ptr->sym_ptr_ptr = symbols + obj_convert(abfd)[dst.r_symndx];
-       
-       ptr = *(cache_ptr->sym_ptr_ptr);
-       cache_ptr->address = dst.r_vaddr;
-       /*
-         The symbols definitions that we have read in have been
-         relocated as if their sections started at 0. But the offsets
-         refering to the symbols in the raw data have not been
-         modified, so we have to have a negative addend to compensate.
-         
-         Note that symbols which used to be common must be left alone
-         */
-       
-       if (ptr->the_bfd == abfd 
-           && ptr->section != (asection *) NULL 
-           && ((ptr->flags & BSF_OLD_COMMON)== 0)) 
-           {
-             cache_ptr->addend = -(ptr->section->vma + ptr->value);
-           }
-       else {
-         cache_ptr->addend = 0;
-       }
-       
-       cache_ptr->address -= asect->vma;
-       
-       cache_ptr->section = (asection *) NULL;
-       
-#if I960
-       cache_ptr->howto = howto_table + dst.r_type;
-#endif
-#if M68
-       cache_ptr->howto = howto_table + dst.r_type - R_RELBYTE;
-#endif
-#if M88
-       if (dst.r_type >= R_PCR16L && dst.r_type <= R_VRT32) {
-         cache_ptr->howto = howto_table + dst.r_type - R_PCR16L;
-         cache_ptr->addend += dst.r_offset << 16;
-       }
-       else {
-         BFD_ASSERT(0);
-       }
-#endif
-       
-      }
-      
-    }
-    
-    asect->relocation = reloc_cache;
-    return true;
-  }
-
-
-/* This is stupid.  This function should be a boolean predicate */
-static unsigned int
-coff_canonicalize_reloc(abfd, section, relptr, symbols)
-bfd            *abfd;
-sec_ptr         section;
-arelent       **relptr;
-asymbol       **symbols;
-  {
-    arelent        *tblptr = section->relocation;
-    unsigned int    count = 0;
-    if (!(tblptr || coff_slurp_reloc_table(abfd, section, symbols)))
-      return 0;
-    tblptr = section->relocation;
-    if (!tblptr)
-      return 0;
-    
-    for (; count++ < section->reloc_count;)
-      *relptr++ = tblptr++;
-    
-    *relptr = 0;
-    
-    return section->reloc_count;
-  }
-
-
-/*
-provided a bfd, a section and an offset into the section, calculate and
-return the name of the source file and the line nearest to the wanted
-location.
-*/
-
-static          boolean
-DEFUN(coff_find_nearest_line,(abfd,
-                             section,
-                             symbols,
-                             offset,
-                             filename_ptr,
-                             functionname_ptr,
-                             line_ptr),
-      bfd            *abfd AND
-      asection       *section AND
-      asymbol       **symbols AND
-      bfd_vma         offset AND
-      CONST char      **filename_ptr AND
-      CONST char       **functionname_ptr AND
-      unsigned int   *line_ptr)
-{
-  static bfd     *cache_abfd;
-  static asection *cache_section;
-  static bfd_vma  cache_offset;
-  static unsigned int cache_i;
-  static alent   *cache_l;
-    
-  unsigned int    i = 0;
-  struct icofdata *cof = obj_icof(abfd);
-  /* Run through the raw syments if available */
-  struct internal_syment         *p;
-  alent          *l;
-  unsigned int    line_base = 0;
-    
-    
-  *filename_ptr = 0;
-  *functionname_ptr = 0;
-  *line_ptr = 0;
-    
-  /* Don't try and find line numbers in a non coff file */
-  if (abfd->xvec->flavour != bfd_target_coff_flavour_enum)
-    return false;
-    
-  if (cof == (struct icofdata *)NULL)
-    return false;
-    
-  p = cof->raw_syments;
-  /*
-    I don't know for sure what's right, but this isn't it. First off, an
-    object file may not have any C_FILE's in it.  After
-    get_normalized_symtab(), it should have at least 1, the one I put
-    there, but otherwise, all bets are off.  Point #2, the first C_FILE
-    isn't necessarily the right C_FILE because any given object may have
-    many.  I think you'll have to track sections as they coelesce in order
-    to find the C_STAT symbol for this section. Then you'll have to work
-    backwards to find the previous C_FILE, or choke if you get to a C_STAT
-    for the same kind of section.  That will mean that the original object
-    file didn't have a C_FILE. xoxorich.
-    */
-    
-#ifdef WEREBEINGPEDANTIC
-  return false;
-#endif
-    
-  for (i = 0; i < cof->raw_syment_count; i++) {
-    if (p->n_sclass == C_FILE) {
-      /* File name is embeded in auxent */
-      /*
-       This isn't right.  The fname should probably be normalized
-       during get_normalized_symtab().  In any case, what was here
-       wasn't right because a SYMENT.n_name isn't an
-       AUXENT.x_file.x_fname. xoxorich.
-       */
-       
-      *filename_ptr = ((AUXENT *) (p + 1))->x_file.x_fname;
-      break;
-    }
-    p += 1 +  p->n_numaux;
-  }
-  /* Now wander though the raw linenumbers of the section */
-  /*
-    If this is the same bfd as we were previously called with and this is
-    the same section, and the offset we want is further down then we can
-    prime the lookup loop
-    */
-  if (abfd == cache_abfd &&
-      section == cache_section &&
-      offset >= cache_offset) {
-    i = cache_i;
-    l = cache_l;
-  }
-  else {
-    i = 0;
-    l = section->lineno;
-  }
-    
-  for (; i < section->lineno_count; i++) {
-    if (l->line_number == 0) {
-      /* Get the symbol this line number points at */
-      coff_symbol_type *coff = (coff_symbol_type *) (l->u.sym);
-      *functionname_ptr = coff->symbol.name;
-      if (coff->native) {
-       struct internal_syment  *s = coff->native;
-       s = s + 1 + s->n_numaux;
-       /*
-         S should now point to the .bf of the function
-         */
-       if (s->n_numaux) {
-         /*
-           The linenumber is stored in the auxent
-           */
-         union internal_auxent   *a = (union internal_auxent *) (s + 1);
-         line_base = a->x_sym.x_misc.x_lnsz.x_lnno;
-       }
-      }
-    }
-    else {
-      if (l->u.offset > offset)
-       break;
-      *line_ptr = l->line_number + line_base + 1;
-    }
-    l++;
-  }
-    
-  cache_abfd = abfd;
-  cache_section = section;
-  cache_offset = offset;
-  cache_i = i;
-  cache_l = l;
-  return true;
-}
-
-#ifdef GNU960
-file_ptr
-coff_sym_filepos(abfd)
-bfd *abfd;
-  {
-    return obj_sym_filepos(abfd);
-  }
-#endif
-
-
-static int 
-DEFUN(coff_sizeof_headers,(abfd, reloc),
-      bfd *abfd AND
-      boolean reloc)
-  {
-    size_t size;
-    
-    if (reloc == false) {
-      size = FILHSZ + AOUTSZ;
-    }
-    else {
-      size = FILHSZ;
-    }
-    
-    size +=  abfd->section_count * SCNHSZ;
-    return size;
-  }
-
-
-#define coff_core_file_failing_command _bfd_dummy_core_file_failing_command
-#define coff_core_file_failing_signal  _bfd_dummy_core_file_failing_signal
-#define coff_core_file_matches_executable_p    _bfd_dummy_core_file_matches_executable_p
-#define coff_slurp_armap               bfd_slurp_coff_armap
-#define coff_slurp_extended_name_table _bfd_slurp_extended_name_table
-#define coff_truncate_arname           bfd_dont_truncate_arname
-#define coff_openr_next_archived_file  bfd_generic_openr_next_archived_file
-#define coff_generic_stat_arch_elt     bfd_generic_stat_arch_elt
-#define        coff_get_section_contents       bfd_generic_get_section_contents
-#define        coff_close_and_cleanup          bfd_generic_close_and_cleanup
diff --git a/bfd/coffish.h b/bfd/coffish.h
deleted file mode 100755 (executable)
index 77e40c8..0000000
+++ /dev/null
@@ -1,601 +0,0 @@
-
-/* All the swapping routines:
-*/
-
-
-
-static void
-DEFUN(swap_reloc_in,(abfd, reloc_src, reloc_dst),
-      bfd            *abfd AND
-      RELOC *reloc_src AND
-      struct internal_reloc *reloc_dst)
-{
-  reloc_dst->r_vaddr = bfd_h_getlong(abfd, reloc_src->r_vaddr);
-  reloc_dst->r_symndx = bfd_h_getlong(abfd, reloc_src->r_symndx);
-  reloc_dst->r_type = bfd_h_getshort(abfd, reloc_src->r_type);
-#if M88
-  reloc_dst->r_offset = bfd_h_getshort(abfd, reloc_src->r_offset);
-#endif
-}
-
-static void
-DEFUN(swap_reloc_out,(abfd, reloc_src, reloc_dst),
-      bfd            *abfd AND
-      struct internal_reloc *reloc_src AND
-      struct external_reloc *reloc_dst)
-{
-  bfd_h_putlong(abfd, reloc_src->r_vaddr, reloc_dst->r_vaddr);
-  bfd_h_putlong(abfd, reloc_src->r_symndx, reloc_dst->r_symndx);
-  bfd_h_putshort(abfd, reloc_src->r_type, reloc_dst->r_type);
-#if M88
-  bfd_h_putshort(abfd, reloc_src->r_offset, reloc_dst->r_offset);
-#endif
-
-}
-
-static void 
-DEFUN(swap_filehdr_in,(abfd, filehdr_src, filehdr_dst),
-      bfd            *abfd AND
-      FILHDR         *filehdr_src AND
-      struct internal_filehdr *filehdr_dst)
-{
-  filehdr_dst->f_magic = bfd_h_get_x(abfd, filehdr_src->f_magic);
-  filehdr_dst->f_nscns = bfd_h_get_x(abfd,filehdr_src-> f_nscns);
-  filehdr_dst->f_timdat = bfd_h_get_x(abfd,filehdr_src-> f_timdat);
-  filehdr_dst->f_symptr = bfd_h_get_x(abfd,filehdr_src-> f_symptr);
-  filehdr_dst->f_nsyms = bfd_h_get_x(abfd,filehdr_src-> f_nsyms);
-  filehdr_dst->f_opthdr = bfd_h_get_x(abfd,filehdr_src-> f_opthdr);
-  filehdr_dst->f_flags = bfd_h_get_x(abfd,filehdr_src-> f_flags);
-}
-
-static void 
-DEFUN(swap_filehdr_out,(abfd, filehdr_in, filehdr_out),
-      bfd            *abfd AND
-      struct internal_filehdr *filehdr_in AND
-      FILHDR         *filehdr_out)
-{
-  bfd_h_put_x(abfd, filehdr_in->f_magic, filehdr_out->f_magic);
-  bfd_h_put_x(abfd, filehdr_in->f_nscns, filehdr_out->f_nscns);
-  bfd_h_put_x(abfd, filehdr_in->f_timdat, filehdr_out->f_timdat);
-  bfd_h_put_x(abfd, filehdr_in->f_symptr, filehdr_out->f_symptr);
-  bfd_h_put_x(abfd, filehdr_in->f_nsyms, filehdr_out->f_nsyms);
-  bfd_h_put_x(abfd, filehdr_in->f_opthdr, filehdr_out->f_opthdr);
-  bfd_h_put_x(abfd, filehdr_in->f_flags, filehdr_out->f_flags);
-}
-
-
-static void 
-DEFUN(bfd_coff_swap_sym_in,(abfd, ext, in),
-      bfd            *abfd AND
-      SYMENT *ext AND
-      struct internal_syment      *in)
-{
-  if( ext->e.e_name[0] == 0) {
-    in->_n._n_n._n_zeroes = 0;
-    in->_n._n_n._n_offset = bfd_h_getlong(abfd, ext->e.e.e_offset);
-  }
-  else {
-    memcpy(in->_n._n_name, ext->e.e_name, SYMNMLEN);
-  }
-  in->n_value = bfd_h_get_x(abfd, ext->e_value);
-  in->n_scnum = bfd_h_get_x(abfd, ext->e_scnum);
-  in->n_type = bfd_h_get_x(abfd, ext->e_type);
-  in->n_sclass = bfd_h_get_x(abfd, ext->e_sclass);
-  in->n_numaux = bfd_h_get_x(abfd, ext->e_numaux);
-}
-
-static void 
-DEFUN(bfd_coff_swap_sym_out,(abfd,in,  ext),
-      bfd            *abfd AND
-      struct internal_syment      *in AND
-      SYMENT *ext)
-{
-  if(in->_n._n_name[0] == 0) {
-    bfd_h_putlong(abfd, 0, ext->e.e.e_zeroes);
-    bfd_h_putlong(abfd, in->_n._n_n._n_offset,  ext->e.e.e_offset);
-  }
-  else {
-    memcpy(ext->e.e_name, in->_n._n_name, SYMNMLEN);
-  }
-  bfd_h_put_x(abfd,  in->n_value , ext->e_value);
-  bfd_h_put_x(abfd,  in->n_scnum , ext->e_scnum);
-  bfd_h_put_x(abfd,  in->n_type , ext->e_type);
-  bfd_h_put_x(abfd,  in->n_sclass , ext->e_sclass);
-  bfd_h_put_x(abfd,  in->n_numaux , ext->e_numaux);
-}
-
-static void
-DEFUN(bfd_coff_swap_aux_in,(abfd, ext, type, class, in),
-      bfd            *abfd AND
-      AUXENT    *ext AND
-      int             type AND
-      int             class AND
-      union internal_auxent  *in)
-{
-  switch (class) {
-  case C_FILE:
-    if (ext->x_file.x_fname[0] == 0) {
-      in->x_file.x_n.x_zeroes = 0;
-      in->x_file.x_n.x_offset  = bfd_h_getlong(abfd, ext->x_file.x_n.x_offset);
-    }
-
-    break;
-  case C_STAT:
-#ifdef C_LEAFSTAT
-  case C_LEAFSTAT:
-#endif
-  case C_HIDDEN:
-    if (type == T_NULL) {
-      in->x_scn.x_scnlen = bfd_h_get_x(abfd, ext->x_scn.x_scnlen);
-      in->x_scn.x_nreloc = bfd_h_get_x(abfd, ext->x_scn.x_nreloc);
-      in->x_scn.x_nlinno = bfd_h_get_x(abfd, ext->x_scn.x_nlinno);
-      break;
-    }
-  default:
-    in->x_sym.x_tagndx = bfd_h_get_x(abfd, ext->x_sym.x_tagndx);
-    in->x_sym.x_tvndx = bfd_h_get_x(abfd, ext->x_sym.x_tvndx);
-
-    if (ISARY(type) || class == C_BLOCK) {
-      in->x_sym.x_fcnary.x_ary.x_dimen[0] = bfd_h_get_x(abfd, ext->x_sym.x_fcnary.x_ary.x_dimen[0]);
-      in->x_sym.x_fcnary.x_ary.x_dimen[1] = bfd_h_get_x(abfd, ext->x_sym.x_fcnary.x_ary.x_dimen[1]);
-      in->x_sym.x_fcnary.x_ary.x_dimen[2] = bfd_h_get_x(abfd, ext->x_sym.x_fcnary.x_ary.x_dimen[2]);
-      in->x_sym.x_fcnary.x_ary.x_dimen[3] = bfd_h_get_x(abfd, ext->x_sym.x_fcnary.x_ary.x_dimen[3]);
-    }
-    else {
-      in->x_sym.x_fcnary.x_fcn.x_lnnoptr = bfd_h_get_x(abfd, ext->x_sym.x_fcnary.x_fcn.x_lnnoptr);
-      in->x_sym.x_fcnary.x_fcn.x_endndx = bfd_h_get_x(abfd, ext->x_sym.x_fcnary.x_fcn.x_endndx);
-    }
-    if (ISFCN(type)) {
-      in->x_sym.x_misc.x_fsize = bfd_h_get_x(abfd, ext->x_sym.x_misc.x_fsize);
-    }
-    else {
-      in->x_sym.x_misc.x_lnsz.x_lnno = bfd_h_get_x(abfd, ext->x_sym.x_misc.x_lnsz.x_lnno);
-      in->x_sym.x_misc.x_lnsz.x_size = bfd_h_get_x(abfd, ext->x_sym.x_misc.x_lnsz.x_size);
-    }
-  }
-}
-
-static void
-DEFUN(bfd_coff_swap_aux_out,(abfd, in, type, class, ext),
-  bfd   *abfd AND
-  union internal_auxent *in AND
-  int    type AND
-  int    class AND
-  AUXENT *ext)
-{
-  switch (class) {
-  case C_FILE:
-    if (in->x_file.x_fname[0] == 0) {
-      bfd_h_put_x(abfd, 0, ext->x_file.x_n.x_zeroes );
-      bfd_h_put_x(abfd, in->x_file.x_n.x_offset, ext->x_file.x_n.x_offset);
-    }
-
-    break;
-  case C_STAT:
-#ifdef C_LEAFSTAT
-  case C_LEAFSTAT:
-#endif
-  case C_HIDDEN:
-    if (type == T_NULL) {
-      bfd_h_put_x(abfd, in->x_scn.x_scnlen, ext->x_scn.x_scnlen);
-      bfd_h_put_x(abfd, in->x_scn.x_nreloc, ext->x_scn.x_nreloc);
-      bfd_h_put_x(abfd, in->x_scn.x_nlinno, ext->x_scn.x_nlinno);
-      break;
-    }
-  default:
-    bfd_h_put_x(abfd, in->x_sym.x_tagndx, ext->x_sym.x_tagndx);
-    bfd_h_put_x(abfd, in->x_sym.x_tvndx , ext->x_sym.x_tvndx);
-
-    if (ISARY(type) || class == C_BLOCK) {
-      bfd_h_put_x(abfd, in->x_sym.x_fcnary.x_ary.x_dimen[0],ext->x_sym.x_fcnary.x_ary.x_dimen[0]);
-      bfd_h_put_x(abfd, in->x_sym.x_fcnary.x_ary.x_dimen[1],ext->x_sym.x_fcnary.x_ary.x_dimen[1]);
-      bfd_h_put_x(abfd, in->x_sym.x_fcnary.x_ary.x_dimen[2],ext->x_sym.x_fcnary.x_ary.x_dimen[2]);
-      bfd_h_put_x(abfd, in->x_sym.x_fcnary.x_ary.x_dimen[3],ext->x_sym.x_fcnary.x_ary.x_dimen[3]);
-    }
-    else {
-      bfd_h_put_x(abfd, in->x_sym.x_fcnary.x_fcn.x_lnnoptr, ext->x_sym.x_fcnary.x_fcn.x_lnnoptr);
-      bfd_h_put_x(abfd, in->x_sym.x_fcnary.x_fcn.x_endndx, ext->x_sym.x_fcnary.x_fcn.x_endndx);
-    }
-    if (ISFCN(type)) {
-      bfd_h_put_x(abfd, in->x_sym.x_misc.x_fsize, ext->x_sym.x_misc.x_fsize);
-    }
-    else {
-      bfd_h_put_x(abfd, in->x_sym.x_misc.x_lnsz.x_lnno, ext->x_sym.x_misc.x_lnsz.x_lnno);
-      bfd_h_put_x(abfd, in->x_sym.x_misc.x_lnsz.x_size, ext->x_sym.x_misc.x_lnsz.x_size);
-    }
-  }
-}
-
-static void
-DEFUN(bfd_coff_swap_lineno_in,(abfd, ext, in),
-      bfd            *abfd AND
-      LINENO *ext AND
-      struct internal_lineno      *in)
-{
-    in->l_addr.l_symndx = bfd_h_get_x(abfd, ext->l_addr.l_symndx);
-    in->l_lnno = bfd_h_get_x(abfd, ext->l_lnno);
-}
-
-static void
-DEFUN(bfd_coff_swap_lineno_out,(abfd, in, ext),
-      bfd            *abfd AND
-      struct internal_lineno      *in AND
-      struct external_lineno *ext)
-{
-  bfd_h_put_x(abfd, in->l_addr.l_symndx, ext->l_addr.l_symndx);
-  bfd_h_put_x(abfd, in->l_lnno, ext->l_lnno);
-}
-
-
-
-
-static void 
-DEFUN(swap_aouthdr_in,(abfd, aouthdr_ext, aouthdr_int),
-      bfd            *abfd AND
-      AOUTHDR        *aouthdr_ext AND
-      struct internal_aouthdr *aouthdr_int)
-{
-  aouthdr_int->magic = bfd_h_get_x(abfd, aouthdr_ext->magic);
-  aouthdr_int->vstamp = bfd_h_get_x(abfd, aouthdr_ext->vstamp);
-  aouthdr_int->tsize = bfd_h_get_x(abfd, aouthdr_ext->tsize);
-  aouthdr_int->dsize = bfd_h_get_x(abfd, aouthdr_ext->dsize);
-  aouthdr_int->bsize = bfd_h_get_x(abfd, aouthdr_ext->bsize);
-  aouthdr_int->entry = bfd_h_get_x(abfd, aouthdr_ext->entry);
-  aouthdr_int->text_start = bfd_h_get_x(abfd, aouthdr_ext->text_start);
-  aouthdr_int->data_start = bfd_h_get_x(abfd, aouthdr_ext->data_start);
-#ifdef I960
-  aouthdr_int->tagentries = bfd_h_get_x(abfd, aouthdr_ext->tagentries);
-#endif
-}
-
-static void 
-DEFUN(swap_aouthdr_out,(abfd, aouthdr_in, aouthdr_out),
-      bfd            *abfd AND
-      struct internal_aouthdr *aouthdr_in AND
-      AOUTHDR        *aouthdr_out)
-{
-  bfd_h_put_x(abfd, aouthdr_in->magic, aouthdr_out->magic);
-  bfd_h_put_x(abfd, aouthdr_in->vstamp, aouthdr_out->vstamp);
-  bfd_h_put_x(abfd, aouthdr_in->tsize, aouthdr_out->tsize);
-  bfd_h_put_x(abfd, aouthdr_in->dsize, aouthdr_out->dsize);
-  bfd_h_put_x(abfd, aouthdr_in->bsize, aouthdr_out->bsize);
-  bfd_h_put_x(abfd, aouthdr_in->entry, aouthdr_out->entry);
-  bfd_h_put_x(abfd, aouthdr_in->text_start, aouthdr_out->text_start);
-  bfd_h_put_x(abfd, aouthdr_in->data_start, aouthdr_out->data_start);
-#ifdef I960
-  bfd_h_put_x(abfd, aouthdr_in->tagentries, aouthdr_out->tagentries);
-#endif
-}
-
-static void 
-DEFUN(swap_scnhdr_in,(abfd, scnhdr_ext, scnhdr_int),
-      bfd            *abfd AND
-      SCNHDR         *scnhdr_ext AND
-      struct internal_scnhdr *scnhdr_int)
-{
-  memcpy(scnhdr_int->s_name, scnhdr_ext->s_name, sizeof(scnhdr_int->s_name));
-  scnhdr_int->s_vaddr = bfd_h_get_x(abfd, scnhdr_ext->s_vaddr);
-  scnhdr_int->s_paddr = bfd_h_get_x(abfd, scnhdr_ext->s_paddr);
-  scnhdr_int->s_size = bfd_h_get_x(abfd, scnhdr_ext->s_size);
-  scnhdr_int->s_scnptr = bfd_h_get_x(abfd, scnhdr_ext->s_scnptr);
-  scnhdr_int->s_relptr = bfd_h_get_x(abfd, scnhdr_ext->s_relptr);
-  scnhdr_int->s_lnnoptr = bfd_h_get_x(abfd, scnhdr_ext->s_lnnoptr);
-  scnhdr_int->s_nreloc = bfd_h_get_x(abfd, scnhdr_ext->s_nreloc);
-  scnhdr_int->s_nlnno = bfd_h_get_x(abfd, scnhdr_ext->s_nlnno);
-  scnhdr_int->s_flags = bfd_h_get_x(abfd, scnhdr_ext->s_flags);
-#ifdef I960
-  scnhdr_int->s_align = bfd_h_get_x(abfd, scnhdr_ext->s_align);
-#endif
-}
-
-static void 
-DEFUN(swap_scnhdr_out,(abfd, scnhdr_int, scnhdr_ext),
-      bfd            *abfd AND
-      struct internal_scnhdr *scnhdr_int AND
-      SCNHDR         *scnhdr_ext)
-{
-  memcpy(scnhdr_ext->s_name, scnhdr_int->s_name, sizeof(scnhdr_int->s_name));
-  bfd_h_put_x(abfd, scnhdr_int->s_vaddr, scnhdr_ext->s_vaddr);
-  bfd_h_put_x(abfd, scnhdr_int->s_paddr, scnhdr_ext->s_paddr);
-  bfd_h_put_x(abfd, scnhdr_int->s_size, scnhdr_ext->s_size);
-  bfd_h_put_x(abfd, scnhdr_int->s_scnptr, scnhdr_ext->s_scnptr);
-  bfd_h_put_x(abfd, scnhdr_int->s_relptr, scnhdr_ext->s_relptr);
-  bfd_h_put_x(abfd, scnhdr_int->s_lnnoptr, scnhdr_ext->s_lnnoptr);
-  bfd_h_put_x(abfd, scnhdr_int->s_nreloc, scnhdr_ext->s_nreloc);
-  bfd_h_put_x(abfd, scnhdr_int->s_nlnno, scnhdr_ext->s_nlnno);
-  bfd_h_put_x(abfd, scnhdr_int->s_flags, scnhdr_ext->s_flags);
-#ifdef I960
-  bfd_h_put_x(abfd, scnhdr_int->s_align, scnhdr_ext->s_align);
-#endif
-}
-
-/*
-   initialize a section structure with information peculiar to this
-   particular implementation of coff
-*/
-
-static          boolean
-DEFUN(coff_new_section_hook,(abfd_ignore, section_ignore),
-      bfd            *abfd_ignore AND
-      asection       *section_ignore)
-{
-#ifdef MC88MAGIC
-  /* FIXME, shouldn't this ifdef be on something that says we are
-     actually COMPILING FOR an 88K coff file, rather than simply
-     knowing its magic number? */
-  /* Align to at least 16 bytes */
-  section_ignore->alignment_power = 4;
-#endif
-#if M68
-  section_ignore->alignment_power = 3;
-#endif
-  return true;
-}
-
-/* Take a section header read from a coff file (in HOST byte order),
-   and make a BFD "section" out of it.  */
-static          boolean
-DEFUN(make_a_section_from_file,(abfd, hdr),
-      bfd            *abfd AND
-      struct internal_scnhdr  *hdr)
-{
-    asection       *return_section;
-
-    {
-       /* Assorted wastage to null-terminate the name, thanks AT&T! */
-       char *name = bfd_alloc(abfd, sizeof (hdr->s_name)+1);
-       if (name == NULL) {
-           bfd_error = no_memory;
-           return false;
-       }
-       strncpy(name, (char *) &hdr->s_name[0], sizeof (hdr->s_name));
-       name[sizeof (hdr->s_name)] = 0;
-
-       return_section = bfd_make_section(abfd, name);
-    }
-
-    /* s_paddr is presumed to be = to s_vaddr */
-#define assign(to, from) return_section->to = hdr->from
-    assign(vma, s_vaddr);
-    /* assign (vma, s_vaddr); */
-    assign(size, s_size);
-    assign(filepos, s_scnptr);
-    assign(rel_filepos, s_relptr);
-    assign(reloc_count, s_nreloc);
-#ifdef I960
-    {
-       /* FIXME, use a temp var rather than alignment_power */
-       assign(alignment_power, s_align);
-       {
-           unsigned int    i;
-           for (i = 0; i < 32; i++) {
-               if ((1 << i) >= (int) (return_section->alignment_power)) {
-                   return_section->alignment_power = i;
-                   break;
-               }
-           }
-       }
-    }
-#endif
-    assign(line_filepos, s_lnnoptr);
-    /*
-       return_section->linesize =   hdr->s_nlnno * sizeof (struct lineno);
-    */
-
-#undef assign
-    return_section->lineno_count = hdr->s_nlnno;
-    return_section->userdata = NULL;
-    return_section->next = (asection *) NULL;
-    if ((hdr->s_flags & STYP_TEXT) || (hdr->s_flags & STYP_DATA))
-       return_section->flags = (SEC_LOAD | SEC_ALLOC);
-    else if (hdr->s_flags & STYP_BSS)
-       return_section->flags = SEC_ALLOC;
-
-    if (hdr->s_nreloc != 0)
-       return_section->flags |= SEC_RELOC;
-    if (hdr->s_scnptr != 0)
-       return_section->flags |= SEC_HAS_CONTENTS;
-    return true;
-}
-static          boolean
-DEFUN(coff_mkobject,(abfd),
-      bfd            *abfd)
-{
-  set_tdata (abfd, bfd_zalloc (abfd,sizeof(coff_data_type)));
-  if (coff_data(abfd) == 0) {
-    bfd_error = no_memory;
-    return false;
-  }
-  coff_data(abfd)->relocbase = 0;
-  return true;
-}
-
-static
-bfd_target     *
-DEFUN(coff_real_object_p,(abfd, nscns, internal_f, internal_a),
-    bfd            *abfd AND
-    unsigned        nscns AND
-  struct internal_filehdr *internal_f AND
-  struct internal_aouthdr *internal_a)
-{
-  coff_data_type *coff;
-
-  size_t          readsize;    /* length of file_info */
-  SCNHDR *external_sections;
-  
-  /* Build a play area */
-  if (coff_mkobject(abfd) != true)
-    return 0;
-  coff = coff_data(abfd);
-  
-  
-  external_sections = (SCNHDR *)bfd_alloc(abfd, readsize = (nscns * SCNHSZ));
-  if (bfd_read((PTR)external_sections, 1, readsize, abfd) != readsize) {
-    goto fail;
-  }
-  
-  
-  
-  /* Now copy data as required; construct all asections etc */
-  coff->symbol_index_slew = 0;
-  coff->relocbase =0;
-  coff->raw_syment_count = 0;
-  coff->raw_linenos = 0;
-  coff->raw_syments = 0;
-  coff->sym_filepos =0;
-  coff->flags = internal_f->f_flags;
-  if (nscns != 0) {
-    unsigned int    i;
-    for (i = 0; i < nscns; i++) {
-      struct internal_scnhdr tmp;
-      swap_scnhdr_in(abfd, external_sections + i, &tmp);
-      make_a_section_from_file(abfd,&tmp);
-    }
-  }
-  /* Determine the machine architecture and type.  */
-  abfd->obj_machine = 0;
-  switch (internal_f->f_magic) {
-#ifdef MIPS
-#ifdef MIPSEBMAGIC
-  case  SMIPSEBMAGIC:
-  case  SMIPSELMAGIC:
-  case  MIPSEBUMAGIC:
-  case  MIPSELUMAGIC:
-  case MIPSEBMAGIC:
-  case MIPSELMAGIC:
-    abfd->obj_arch = bfd_arch_mips;
-    abfd->obj_machine = 0;
-    break;
-#endif
-#endif
-#ifdef MC68MAGIC
-  case MC68MAGIC:
-  case M68MAGIC:
-    abfd->obj_arch = bfd_arch_m68k;
-    abfd->obj_machine = 68020;
-    break;
-#endif
-#ifdef MC88MAGIC
-  case MC88MAGIC:
-  case MC88DMAGIC:
-  case MC88OMAGIC:
-    abfd->obj_arch = bfd_arch_m88k;
-    abfd->obj_machine = 88100;
-    break;
-#endif
-#ifdef I960
-#ifdef I960ROMAGIC
-  case I960ROMAGIC:
-  case I960RWMAGIC:
-    abfd->obj_arch = bfd_arch_i960;
-    switch (F_I960TYPE & internal_f->f_flags) 
-       {
-       default:
-       case F_I960CORE:
-         abfd->obj_machine = bfd_mach_i960_core;
-         break;
-       case F_I960KB:
-         abfd->obj_machine = bfd_mach_i960_kb_sb;
-         break;
-       case F_I960MC:
-         abfd->obj_machine = bfd_mach_i960_mc;
-         break;
-       case F_I960XA:
-         abfd->obj_machine = bfd_mach_i960_xa;
-         break;
-       case F_I960CA:
-         abfd->obj_machine = bfd_mach_i960_ca;
-         break;
-       case F_I960KA:
-         abfd->obj_machine = bfd_mach_i960_ka_sa;
-         break;
-         
-       }
-    break;
-#endif
-#endif
-    
-  default:                     /* Unreadable input file type */
-    abfd->obj_arch = bfd_arch_obscure;
-    break;
-  }
-  
-  if (!(internal_f->f_flags & F_RELFLG))
-    abfd->flags |= HAS_RELOC;
-  if ((internal_f->f_flags & F_EXEC))
-    abfd->flags |= EXEC_P;
-  if (!(internal_f->f_flags & F_LNNO))
-    abfd->flags |= HAS_LINENO;
-  if (!(internal_f->f_flags & F_LSYMS))
-    abfd->flags |= HAS_LOCALS;
-  
-  
-  bfd_get_symcount(abfd) = internal_f->f_nsyms;
-  if (internal_f->f_nsyms)
-    abfd->flags |= HAS_SYMS;
-  
-  coff->sym_filepos = internal_f->f_symptr;
-  
-  
-  
-  coff->symbols = (coff_symbol_type *) NULL;
-  bfd_get_start_address(abfd) = internal_f->f_opthdr ? internal_a->entry : 0;
-  
-  return abfd->xvec;
- fail:
-  bfd_release(abfd, coff);
-  return (bfd_target *)NULL;
-}
-
-static bfd_target *
-DEFUN(coff_object_p,(abfd),
-      bfd            *abfd)
-  {
-    int   nscns;
-    FILHDR filehdr;
-    AOUTHDR opthdr;
-    struct internal_filehdr internal_f;
-    struct internal_aouthdr internal_a;
-    
-    bfd_error = system_call_error;
-    
-    /* figure out how much to read */
-    if (bfd_read((PTR) &filehdr, 1, FILHSZ, abfd) != FILHSZ)
-      return 0;
-    
-    swap_filehdr_in(abfd, &filehdr, &internal_f);
-    
-    if (BADMAG(internal_f)) {
-      bfd_error = wrong_format;
-      return 0;
-    }
-    nscns =internal_f.f_nscns;
-    
-    if (internal_f.f_opthdr) {
-      if (bfd_read((PTR) &opthdr, 1,AOUTSZ, abfd) != AOUTSZ) {
-       return 0;
-      }
-      swap_aouthdr_in(abfd, &opthdr, &internal_a);
-    }
-    
-    /* Seek past the opt hdr stuff */
-    bfd_seek(abfd, internal_f.f_opthdr + FILHSZ, SEEK_SET);
-    
-    /* if the optional header is NULL or not the correct size then
-      quit; the only difference I can see between m88k dgux headers (MC88DMAGIC)
-       and Intel 960 readwrite headers (I960WRMAGIC) is that the
-         optional header is of a different size.
-
-       But the mips keeps extra stuff in it's opthdr, so dont check
-       when doing that
-           */
-    
-#ifndef MIPS    
-    if (internal_f.f_opthdr != 0 && AOUTSZ != internal_f.f_opthdr)
-      return (bfd_target *)NULL;
-#endif
-    
-    return coff_real_object_p(abfd, nscns, &internal_f, &internal_a);
-  }
-
-
diff --git a/bfd/coffswap.c b/bfd/coffswap.c
deleted file mode 100755 (executable)
index b1f7451..0000000
+++ /dev/null
@@ -1,123 +0,0 @@
-/* Byte-swapping routines for COFF files */
-
-/* Copyright (C) 1990, 1991 Free Software Foundation, Inc.
-
-This file is part of BFD, the Binary File Diddler.
-
-BFD is free software; you can redistribute it and/or modify it under the
-   terms of the GNU General Public License as published by the Free Software
-   Foundation; either version 1, or (at your option) any later version.
-
-BFD is distributed in the hope that it will be useful, but WITHOUT ANY
-   WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
-   FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more
-   details.
-
-You should have received a copy of the GNU General Public License along with
-   BFD; see the file COPYING.  If not, write to the Free Software Foundation,
-   675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-/* Most of this hacked by Steve Chamberlain, steve@cygnus.com */
-#if 0
-#include <ansidecl.h>
-#include "intel-coff.h"
-#include "bfd.h"
-#include "libcoff.h"           /* to allow easier abstraction-breaking */
-
-#define sp(x) bfd_h_put_x(abfd, x, &x)
-
-/* All the generic swapping routines:
-
-FIXME
-   These routines cater for the sizes and alignments and offsets of
-   all the contained fields. Because of this, the fields can change
-   size, so these should be phased out to use the ones specific to the
-   file format.
- */
-
-void 
-DEFUN(bfd_coff_swap_name,(abfd, ptr),
-      bfd            *abfd AND
-      long           *ptr)
-{
-    if (ptr[0] == 0) {
-       /* There is an index which needs to be swapped */
-       bfd_h_put_x(abfd, ptr[1], (ptr + 1));
-    }
-    else {
-       /* This is a string .. leave it alone */
-    }
-}
-
-void 
-DEFUN(bfd_coff_swap_sym,(abfd, se),
-      bfd            *abfd AND
-      struct internal_syment      *se)
-{
-    bfd_coff_swap_name(abfd, (long*)(se->n_name));
-    bfd_h_put_x(abfd, se->n_value, &se->n_value);
-    bfd_h_put_x(abfd, se->n_scnum, &se->n_scnum);
-    bfd_h_put_x(abfd, se->n_type, &se->n_type);
-    bfd_h_put_x(abfd, se->n_sclass, &se->n_sclass);
-    bfd_h_put_x(abfd, se->n_numaux, &se->n_numaux);
-}
-
-void
-DEFUN(bfd_coff_swap_aux,(abfd, au, type, class),
-      bfd            *abfd AND
-      struct internal_auxent    *au AND
-      int             type AND
-      int             class)
-{
-    switch (class) {
-    case C_FILE:
-       bfd_coff_swap_name(abfd, (long *)(&au->x_file.x_n));
-       break;
-    case C_STAT:
-#ifdef C_LEAFSTAT
-    case C_LEAFSTAT:
-#endif
-    case C_HIDDEN:
-       if (type == T_NULL) {
-           sp(au->x_scn.x_scnlen);
-           sp(au->x_scn.x_nreloc);
-           sp(au->x_scn.x_nlinno);
-           break;
-       }
-    default:
-       sp(au->x_sym.x_tagndx);
-       sp(au->x_sym.x_tvndx);
-
-       if (ISARY(type) || class == C_BLOCK) {
-           sp(au->x_sym.x_fcnary.x_ary.x_dimen[0]);
-           sp(au->x_sym.x_fcnary.x_ary.x_dimen[1]);
-           sp(au->x_sym.x_fcnary.x_ary.x_dimen[2]);
-           sp(au->x_sym.x_fcnary.x_ary.x_dimen[3]);
-       }
-       else {
-           sp(au->x_sym.x_fcnary.x_fcn.x_lnnoptr);
-           sp(au->x_sym.x_fcnary.x_fcn.x_endndx);
-       }
-       if (ISFCN(type)) {
-           sp(au->x_sym.x_misc.x_fsize);
-       }
-       else {
-           sp(au->x_sym.x_misc.x_lnsz.x_lnno);
-           sp(au->x_sym.x_misc.x_lnsz.x_size);
-       }
-    }
-}
-
-void
-DEFUN(bfd_coff_swap_lineno,(abfd, lineno),
-      bfd            *abfd AND
-      struct internal_lineno      *lineno)
-{
-    sp(lineno->l_addr.l_symndx);
-    sp(lineno->l_lnno);
-}
-
-
-
-#endif
diff --git a/bfd/config.sub b/bfd/config.sub
deleted file mode 100755 (executable)
index dac9ab8..0000000
+++ /dev/null
@@ -1,446 +0,0 @@
-#!/bin/sh
-
-# Configuration subroutine to validate and canonicalize a configuration type.
-# Supply the specified configuration type as an argument.
-# If it is invalid, we print an error message on stderr and exit with code 1.
-# Otherwise, we print the canonical config type on stdout and succeed.
-
-# This file is supposed to be the same for all GNU packages
-# and recognize all the CPU types, system types and aliases
-# that are meaningful with *any* GNU software.
-# Each package is responsible for reporting which valid configurations
-# it does not support.  The user should be able to distinguish
-# a failure to support a valid configuration from a meaningless
-# configuration (e.g. a typo).
-
-# Please email any bugs, comments, and/or additions to this file to:
-# configure@cygnus.com
-
-# decode aliases into canonical names
-
-case "$1" in
-# cpu alone is a valid alias for cpu-none-none.
-vax | tahoe | i386 | i860 | m68k | m68000 | m88k | sparc | ns32k \
-       | alliant | arm | c1 | c2 | mips | pyramid | tron | a29k \
-       | romp | rs6000 | i960 | h8300)
-       cpu=$1
-       vendor=none
-       os=none
-       ;;
-altos | altos3068)
-       cpu=m68k
-       vendor=altos
-       os=sysv # maybe?
-       ;;
-altosgas)
-       cpu=m68k
-       vendor=altos
-       os=gas
-       ;;
-am29k)
-       cpu=a29k
-       vendor=none
-       os=bsd
-       ;;
-amdahl)
-       cpu=580
-       vendor=amdahl
-       os=uts
-       ;;
-amigados)
-       cpu=m68k
-       vendor=cbm
-       os=amigados # Native AmigaDOS
-       ;;
-amigaunix | amix)
-       cpu=m68k
-       vendor=cbm
-       os=svr4 # System V Release 4 (svr4 is an industry recognized acronym)
-       ;;
-apollo68)
-       cpu=m68k
-       vendor=apollo
-       os=sysv # maybe?
-       ;;
-balance)
-       cpu=ns32k
-       vendor=sequent
-       os=dynix
-       ;;
-convex-c1)
-       cpu=c1
-       vendor=convex
-       os=sysv # maybe?
-       ;;
-convex-c2)
-       cpu=c2
-       vendor=convex
-       os=sysv # maybe?
-       ;;
-cray | ymp)
-       cpu=ymp
-       vendor=cray
-       os=unicos
-       ;;
-cray2)
-       cpu=cray2
-       vendor=cray
-       os=unicos
-       ;;
-dec3100 | decstatn | decstation | decstation-3100 | pmax | pmin)
-       cpu=mips
-       vendor=dec
-       os=ultrix
-       ;;
-delta | 3300 | motorola-3300 | motorola-delta \
-      | 3300-motorola | delta-motorola)
-       cpu=m68k
-       vendor=motorola
-       os=sysv # maybe?
-       ;;
-
-delta88)
-       cpu=m88k
-       vendor=motorola
-       os=m88kbcs
-       ;;
-
-gmicro)
-       cpu=tron
-       vendor=gmicro
-       os=sysv # maybe?
-       ;;
-
-h8300hds)
-       cpu=h8300
-       vendor=hitachi
-       os=hds
-       ;;
-
-# start-sanitize-v9
-hal-32 | hal32)
-       cpu=sparc64
-       vendor=hal
-       os=hal32
-       ;;
-hal-64 | hal64)
-       cpu=sparc64
-       vendor=hal
-       os=hal64
-       ;;
-sparc64)
-       cpu=sparc64
-       vendor=sun
-       os=v9
-       ;;
-sparc64-v7 | sparc64v7)
-       cpu=sparc64
-       vendor=sun
-       os=v7
-       ;;
-# end-sanitize-v9
-hp300bsd)
-       cpu=m68k
-       vendor=hp
-       os=bsd
-       ;;
-hp300hpux | hpux | hp9k3[2-9][0-9])
-       cpu=m68k
-       vendor=hp
-       os=hpux
-       ;;
-hp9k31[0-9] | hp9k2[0-9][0-9])
-       cpu=m68000
-       vendor=hp
-       os=hpux
-       ;;
-i386sco)
-       cpu=i386
-       vendor=sco
-       os=sysv # maybe?
-       ;;
-i386v)
-       cpu=i386
-       vendor=none
-       os=sysv
-       ;;
-i386v32)
-       cpu=i386
-       vendor=none
-       os=sysv32
-       ;;
-iris | iris4d)
-       cpu=mips
-       vendor=sgi
-       os=irix # maybe?
-       ;;
-
-dpx2)
-       vendor=bull
-       cpu=m68k
-       os=sysv
-       ;;
-isi | isi68)
-       cpu=m68k
-       vendor=isi
-       os=sysv # maybe?
-       ;;
-littlemips)
-       cpu=mips
-       vendor=little
-       os=bsd
-       ;;
-magnum | m3230)
-       cpu=mips
-       vendor=mips
-       os=sysv # maybe?
-       ;;
-merlin)
-       cpu=ns32k
-       vendor=utek
-       os=sysv # maybe?
-       ;;
-miniframe)
-       cpu=m68000
-       vendor=convergent
-       os=sysv # maybe?
-       ;;
-mmax)
-       cpu=ns32k
-       vendor=encore
-       os=sysv # maybe?
-       ;;
-news | news700 | news800 | news900)
-       cpu=m68k
-       vendor=sony
-       os=newsos3 # Based on bsd-4.3
-       ;;
-news1000)
-       cpu=m68030
-       vendor=sony
-       os=newsos3 # ?
-       ;;
-news-3600 | bigmips | risc-news)
-       cpu=mips
-       vendor=sony
-       os=newsos4 # Presumably?
-       ;;
-next)
-       cpu=m68k
-       vendor=next
-       os=sysv # maybe?
-       ;;
-nindy960)
-       cpu=i960
-       vendor=intel
-       os=nindy
-       ;;
-none)
-       cpu=none
-       vendor=none
-       os=none
-       ;;
-np1)
-       cpu=np1
-       vendor=gould
-       os=sysv # maybe?
-       ;;
-rtpc)
-       cpu=romp
-       vendor=ibm
-       os=aix # maybe?
-       ;;      
-pbd)
-       cpu=sparc
-       vendor=unicom
-       os=sysv
-       ;;
-pn)
-       cpu=pn
-       vendor=gould
-       os=sysv # maybe?
-       ;;
-ps2)
-       cpu=i386
-       vendor=ibm
-       os=sysv # maybe?
-       ;;
-sun2)
-       cpu=m68000
-       vendor=sun
-       os=sunos4
-       ;;
-sun2os3)
-       cpu=m68000
-       vendor=sun
-       os=sunos3
-       ;;
-sun2os4)
-       cpu=m68000
-       vendor=sun
-       os=sunos4
-       ;;
-sun3)
-       cpu=m68k
-       vendor=sun
-       os=sunos4
-       ;;
-sun3os3)
-       cpu=m68k
-       vendor=sun
-       os=sunos3
-       ;;
-sun3os4)
-       cpu=m68k
-       vendor=sun
-       os=sunos4
-       ;;
-sun386 | roadrunner | sun386i)
-       cpu=i386
-       vendor=sun
-       os=sunos
-       ;;
-sun4)
-       cpu=sparc
-       vendor=sun
-       os=sunos4
-       ;;
-sun4os3)
-       cpu=sparc
-       vendor=sun
-       os=sunos3
-       ;;
-sun4os4)
-       cpu=sparc
-       vendor=sun
-       os=sunos4
-       ;;
-symmetry)
-       cpu=i386
-       vendor=sequent
-       os=dynix
-       ;;
-tower | tower-32)
-       cpu=m68k
-       vendor=ncr
-       os=sysv # maybe?
-       ;;
-ultra3)
-       cpu=a29k
-       vendor=nyu
-       os=sym1
-       ;;
-umax)
-       cpu=ns32k
-       vendor=encore
-       os=sysv # maybe?
-       ;;
-unixpc | safari | pc7300 | 3b1 | 7300 | 7300-att | att-7300)
-       cpu=m68k
-       vendor=att
-       os=sysv # maybe?
-       ;;
-vax-dec)
-       cpu=vax
-       vendor=dec
-       os=ultrix # maybe?
-       ;;
-vxworks68)
-       cpu=m68k
-       vendor=wrs
-       os=vxworks
-       ;;
-vxworks960)
-       cpu=i960
-       vendor=wrs
-       os=vxworks
-       ;;
-xmp)
-       cpu=xmp
-       vendor=cray
-       os=unicos
-       ;;
-# not an alias.  parse what we expect to be a canonical name.
-*)
-       cpu=`echo $1 | sed 's/-.*$//'`
-
-       if [ "${cpu}" = "$1" ] ; then
-               # no vendor so this is an invalid name.
-               echo '***' No vendor: configuration \`$1\' not recognized 1>&2
-               exit 1
-       else
-               # parse out vendor
-               rest=`echo $1 | sed "s/${cpu}-//"`
-               vendor=`echo ${rest} | sed 's/-.*$//'`
-
-               if [ "${vendor}" = "${rest}" ] ; then
-                       # a missing os is acceptable
-                       os=none
-               else
-                       os=`echo ${rest} | sed "s/${vendor}-//"`
-               fi
-       fi
-       ;;
-esac
-
-# At this point we should have three parts of a canonical name in cpu,
-# vendor, and os.
-
-# verify that the cpu is known.
-
-case "${cpu}" in
-none | vax | tahoe | i386 | i860 | m68k | m68000 | m88k | sparc \
-       | ns32k | alliant | arm | c1 | c2 | mips | pyramid | tron \
-       | a29k | romp | rs6000 | i960 | xmp | ymp | cray2 | 580 | h8300)
-       ;;
-
-# start-sanitize-v9
-sparc64) ;;
-# end-sanitize-v9
-
-*)
-       echo '***' Invalid cpu \`${cpu}\': configuration \`$1\' not recognized 1>&2
-       exit 1
-       ;;
-esac
-
-# verify that the vendor is known.
-
-case "${vendor}" in
-       altos | amdahl | aout | apollo | att | bcs | bout |\
-       cbm | convergent | convex | coff | cray | dec | encore |\
-       gould | hitachi | intel | isi | hp | ibm | little | mips | motorola |\
-       ncr | next | none | nyu | sco | sequent | sgi | sony | sun |\
-       unicom | utek | wrs | bull ) ;; 
-
-# start-sanitize-v9
-hal) ;;
-# end-sanitize-v9
-
-*)
-       echo '***' Invalid vendor \`${vendor}\': configuration \`$1\' not recognized 1>&2
-       exit 1
-       ;;
-esac
-
-# verify that the os is known, if it exists.
-
-case "${os}" in
-aix* | aout | bout | bsd* | coff | ctix* | dynix* | esix* | hpux* \
-       | hds | irix* | isc* | kern | mach* | newsos* | nindy* | none \
-       | osf* | sco* | sunos* | sysv* | ultrix* | unos* | v88r* \
-       | vms* | vxworks* | sym[1-9]* | unicos* | uts | svr4 \
-       | amigados) 
-       ;;
-
-# start-sanitize-v9
-hal32 | hal64 | v7 | v9) ;;
-# end-sanitize-v9
-
-*)
-       echo '***' Invalid os \`${os}\': configuration \`$1\' not recognized 1>&2
-       exit 1
-       ;;
-esac
-
-echo ${cpu}-${vendor}-${os}
diff --git a/bfd/configdos.bat b/bfd/configdos.bat
deleted file mode 100755 (executable)
index 46cdb94..0000000
+++ /dev/null
@@ -1,6 +0,0 @@
-@echo off
-echo Configuring BFD for H8/300
-
-copy hosts\h-go32.h sysdep.h
-copy makefile.dos makefile
-
diff --git a/bfd/configure b/bfd/configure
deleted file mode 100755 (executable)
index e7e05e8..0000000
+++ /dev/null
@@ -1,774 +0,0 @@
-#!/bin/sh
-
-# Configuration script
-#   Copyright (C) 1988, 1990, 1991 Free Software Foundation, Inc.
-
-#This file is part of GNU.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-# 
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-# 
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-# $Id$
-
-#
-# Shell script to create proper links to machine-dependent files in
-# preparation for compilation.
-#
-# If configure succeeds, it leaves its status in config.status.
-# If configure fails after disturbing the status quo, 
-#      config.status is removed.
-#
-
-remove=rm
-hard_link=ln
-symbolic_link='ln -s'
-
-#for Test
-#remove="echo rm"
-#hard_link="echo ln"
-#symbolic_link="echo ln -s"
-
-progname=$0
-
-# clear some things potentially inherited from environment.
-ansi=
-arguments=$*
-defaulttargets=
-destdir=
-fatal=
-hostsubdir=
-Makefile=Makefile
-Makefile_in=Makefile.in
-norecursion=
-recurring=
-removing=
-srcdir=
-srctrigger=
-target=
-targets=
-commontargets=
-configdirs=
-targetsubdir=
-template=
-verbose=
-
-for arg in $*;
-do
-       case ${arg} in
-       -ansi | +a*)
-               ansi=true
-               clib=clib
-               ;;
-       -destdir=* | +destdir=* | +destdi=* | +destd=* | +dest=* | +des=* | +de=* | +d=*)
-               destdir=`echo ${arg} | sed 's/[+-]d[a-z]*=//'`
-               ;;
-       -languages=* | +languages=* | +language=* | +languag=* \
-               | +langua=* | +langu=* | +lang=* | +lan=* | +la=* \
-               | +l=*)
-               languages="${languages} `echo ${arg} | sed 's/[+-]l[a-z]*=//'`"
-               ;;
-       -gas | +g*)
-               gas=yes
-               ;;
-       -help | +h*)
-               fatal=true
-               ;;
-       -nfp | +nf*)
-               nfp=yes
-               ;;
-       -norecursion | +no*)
-               norecursion=true
-               ;;
-       -recurring | +recurring | +recurrin | +recurri | +recurr | +recur | +recu | +rec | +re)
-               recurring=true
-               ;;
-       -rm | +rm)
-               removing=${arg}
-               ;;
-#      -srcdir=* | +srcdir=* | +srcdi=* | +srcd=* | +src=* | +sr=* | +s=*)
-#              srcdir=`echo ${arg} | sed 's/[+-]s[a-z]*=//'`
-#              ;;
-       -subdirs | +f* | +su*)
-               subdirs=${arg}
-               ;;
-       -target=* | +target=* | +targe=* | +targ=* | +tar=* | +ta=*)
-               if [ -n "${targets}" ] ; then
-                       subdirs="+subdirs"
-               fi
-
-               newtargets="${targets} `echo ${arg} | sed 's/[+-]t[a-z]*=//'`"
-               targets="${newtargets}"
-               ;;
-       -template=* | +template=* | +templat=* | +templa=* | +templ=* | +temp=* | +tem=* | +te=*)
-               template=`echo ${arg} | sed 's/[+-]template=//'`
-               ;;
-       -v | -verbose | +v*)
-               verbose=${arg}
-               ;;
-       -* | +*)
-               (echo ;
-               echo "Unrecognized option: \"${arg}\"". ;
-               echo) 1>&2
-               fatal=true
-               ;;
-       *)
-               if [ -n "${hosts}" ] ; then
-                       subdirs="+subdirs"
-               fi
-
-               newhosts="${hosts} ${arg}"
-               hosts=${newhosts}
-               ;;
-       esac
-done
-
-if [ -n "${verbose}" ] ; then
-       echo `pwd`/configure $*
-fi
-
-# process host and target only if not rebuilding configure itself or removing.
-if [ -z "${template}" -a -z "${removing}" -a -z "${fatal}" ] ; then
-       # Complain if an arg is missing
-       if [ -z "${hosts}" ] ; then
-               (echo ;
-               echo "configure: No HOST specified." ;
-               echo) 1>&2
-               fatal=true
-       fi
-fi
-
-if [ -n "${fatal}" -o "${hosts}" = "help" ] ; then
-       (echo "Usage: configure HOST" ;
-       echo ;
-       echo "Options: [defaults in brackets]" ;
-       echo " +ansi            configure w/ANSI library. [no ansi lib]" ;
-       echo " +destdir=MYDIR   configure for installation into MYDIR. [/usr/local]" ;
-       echo " +subdirs         configure in subdirectories.  [in source directories]" ;
-       echo " +lang=LANG       configure to build LANG. [gcc]" ;
-       echo " +help            print this message. [normal config]" ;
-       echo " +gas             configure the compilers for use with gas. [native as]" ;
-       echo " +nfp             configure the compilers default to soft floating point. [hard float]" ;
-       echo " +norecursion     configure this directory only. [recurse]" ;
-       echo " +rm              remove this configuration. [build a configuration]" ;
-       echo " +target=TARGET   configure for TARGET.  [TARGET = HOST]" ;
-       echo " +template=TEM    rebuild configure using TEM. [normal config]" ;
-       echo ;
-       echo "Where HOST and TARGET are something like \"vax\", \"sun3\", \"encore\", etc." ;
-       echo "Asking for more than one \"+target\" implies \"+subdirs\".  Any other" ;
-       echo "options given will apply to all targets.") 1>&2
-
-       if [ -r config.status ] ; then
-               cat config.status
-       fi
-
-       exit 1
-fi
-
-#### configure.in common parts come in here.
-# This file is a shell script that supplies the information necessary
-# to tailor a template configure script into the configure script
-# appropriate for this directory.  For more information, check any
-# existing configure script.
-
-srctrigger=libbfd.c
-srcname="bfd"
-
-## end of common part.
-
-# are we rebuilding config itself?
-if [ -n "${template}" ] ; then
-       if [ ! -r ${template} ] ; then
-               echo '***' "Can't find template ${template}." 1>&2
-               exit 1
-       fi
-
-# prep the template
-       sed -e '/^#### configure.in common parts come in here.$/,/^## end of common part.$/c\
-#### configure.in common parts come in here.\
-## end of common part.' \
-       -e '/^#### configure.in per-host parts come in here.$/,/^## end of per-host part.$/c\
-#### configure.in per-host parts come in here.\
-## end of per-host part.' \
-       -e '/^#### configure.in per-target parts come in here.$/,/^## end of per-target part.$/c\
-#### configure.in per-target parts come in here.\
-## end of per-target part.' \
-       -e '/^#### configure.in post-target parts come in here.$/,/^## end of post-target part.$/c\
-#### configure.in post-target parts come in here.\
-## end of post-target part.' \
-       < ${template} > template.new
-
-       if [ -r configure.in ] ; then
-               if [ -z "`grep '^# per\-host:' configure.in`" ] ; then
-                       echo '***' `pwd`/configure.in has no "per-host:" line. 1>&2
-                       exit 1
-               fi
-
-               if [ -z "`grep '^# per\-target:' configure.in`" ] ; then
-                       echo '***' `pwd`/configure.in has no "per-target:" line. 1>&2
-                       exit 1
-               fi
-
-               # split configure.in into common, per-host, per-target,
-               # and post-target parts.  Post-target is optional.
-               sed -e '/^# per\-host:/,$d' configure.in > configure.com
-               sed -e '1,/^# per\-host:/d' -e '/^# per\-target:/,$d' configure.in > configure.hst
-               if grep -s '^# post-target:' configure.in ; then
-                 sed -e '1,/^# per\-target:/d' -e '/^# post\-target:/,$d' configure.in > configure.tgt
-                 sed -e '1,/^# post\-target:/d' configure.in > configure.pos
-               else
-                 sed -e '1,/^# per\-target:/d' configure.in > configure.tgt
-                 echo >configure.pos
-               fi
-
-               # and insert them
-               sed -e '/^#### configure.in common parts come in here.$/  r configure.com' \
-                       -e '/^#### configure.in per\-host parts come in here.$/  r configure.hst' \
-                       -e '/^#### configure.in per\-target parts come in here.$/  r configure.tgt' \
-                       -e '/^#### configure.in post\-target parts come in here.$/  r configure.pos' \
-                       template.new > configure.new
-
-               rm -f configure.com configure.tgt configure.hst configure.pos
-       else
-               echo Warning: no configure.in in `pwd`
-               cat ${template} >> configure
-       fi
-
-       chmod a+x configure.new
-       rm template.new
-#      mv configure configure.old
-       mv configure.new configure
-
-       if [ -n "${verbose}" ] ; then
-               echo Rebuilt configure in `pwd`
-       fi
-
-       # Now update config.sub from the template directory.
-       if echo "$template" | grep -s 'configure$' ; then
-               cp `echo "$template" | sed s/configure$/config.sub/` ./config.sub.new
-       #       mv config.sub config.sub.old
-               mv config.sub.new config.sub
-
-               if [ -n "${verbose}" ] ; then
-                       echo Rebuilt config.sub in `pwd`
-               fi
-       fi
-
-       if [ -z "${norecursion}" ] ; then
-               # If template is relative path, make it absolute for recurring.
-               if echo "${template}" | grep -s '^/' ; then
-                  true
-               else
-                  template=`pwd`/${template}
-               fi
-
-               while [ -n "${configdirs}" ] ; do
-                       # set configdir to car of configdirs, configdirs to cdr of configdirs
-                       set ${configdirs}; configdir=$1; shift; configdirs=$*
-
-                       if [ "`echo ${configdir}.*`" != "${configdir}.*" ] ; then
-                               targetspecificdirs=${configdir}.*
-                       else
-                               targetspecificdirs=
-                       fi
-
-                       for i in ${configdir} ${targetspecificdirs} ; do
-                               if [ -d $i ] ; then
-                                       if [ -r $i/configure ] ; then
-                                               (cd $i ;
-                                                       ./configure +template=${template} ${verbose})
-                                       else
-                                               echo Warning: No configure script in `pwd`/$i
-                                       fi
-                               else
-                                       if [ -n "${verbose}" ] ; then
-                                         echo Warning: directory $i is missing.
-                                       fi
-                               fi
-                       done
-               done
-       fi
-
-       exit 0
-fi
-
-# some sanity checks on configure.in
-if [ -z "${srctrigger}" ] ; then
-       echo Warning: srctrigger not set in configure.in. `pwd` not configured.
-       exit 1
-fi
-
-for host in ${hosts} ; do
-       # Default other arg
-       if [ -z "${targets}" -o -n "${defaulttargets}" ] ; then
-               targets=${host}
-               defaulttargets=true
-       fi
-
-       host_alias=${host}
-
-       result=`/bin/sh ./config.sub ${host}`
-       host_cpu=`echo $result | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'`
-       host_vendor=`echo $result | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'`
-       host_os=`echo $result | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'`
-       host=${host_cpu}-${host_vendor}-${host_os}
-       host_makefile_frag=config/hmake-${host}
-
-#### configure.in per-host parts come in here.
-
-if [ "${host_os}" = "posix" ] ; then
-       bfd_host=posix
-else
-       case "${host_cpu}" in
-       rs6000) bfd_host=aix ;;
-       mips)
-               case "${host_vendor}" in
-               dec)    bfd_host=dec3100 ;;
-               sgi)    bfd_host=irix3 ;;
-               esac
-               ;;
-       m88k)
-               case "${host_vendor}" in
-               *)
-                       case "${host_os}" in
-                       dgux)   bfd_host=dgux ;;
-                       esac
-                       ;;
-               esac
-               ;;
-       m68k)
-               case "${host_vendor}" in
-               cbm)
-                       case ${host_os} in
-                       amigados)       bfd_host=amigados ;;
-                       svr4)           bfd_host=amix ;;
-                       esac
-                       ;;
-               hp)     
-                       case "${host_os}" in
-                       hpux)   bfd_host=hp9000 ;;
-                       bsd)    bfd_host=hp300bsd ;;
-                       esac
-                       ;;
-               sony)   bfd_host=news ;;
-               sun)    bfd_host=sun3 ;;
-               esac
-               ;;
-
-       i386)
-               case "${host_vendor}" in
-               *)
-                       case "${host_os}" in
-                       sysv)   bfd_host=i386v ;;
-                       esac
-                       ;;
-               esac
-               ;;
-
-       sparc)
-               case "${host_vendor}" in
-               sun)    bfd_host=sun4 ;;
-               esac
-               ;;
-
-       rtpc)   bfd_host=rtbsd
-               ;;
-
-       a29k)   bfd_host=ultra3
-               ;;
-
-       tahoe)
-               bfd_host=${host_cpu}
-               ;;
-        vax)
-               case "${host_os}" in
-               ultrix) bfd_host=vaxult ;;
-               *) bfd_host=vax ;;
-               esac
-               ;;
-       esac
-fi
-
-if [ ! -f config/h-${bfd_host} ] ; then
-       echo '***' BFD does not support host ${host}: no file config/h-${bfd_host}
-       exit 1
-fi
-
-host_makefile_frag=config/h-${bfd_host}
-
-## end of per-host part.
-
-       for target in ${targets} ; do
-
-               target_alias=${target}
-               result=`/bin/sh ./config.sub ${target}`
-               target_cpu=`echo $result | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'`
-               target_vendor=`echo $result | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'`
-               target_os=`echo $result | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'`
-               target=${target_cpu}-${target_vendor}-${target_os}
-               target_makefile_frag=config/tmake-${target}
-
-#### configure.in per-target parts come in here.
-
-case "${target_vendor}" in
-aout | coff | bout | elf) bfd_target=${target_cpu}-${target_vendor} ;;
-sony)  bfd_target=news ;;
-intel) bfd_target=${target_cpu}-coff ;;        
-cbm)   bfd_target=${target_cpu}-elf ;;
-
-hitachi)
-       case "${target_cpu}" in
-       h8300) bfd_target=h8300-ieee ;;
-       *) echo "bad hitachi cpu" ;;
-       esac
-       ;;
-
-
-wrs)
-       case "${target_cpu}" in
-       i960) bfd_target=i960-bout ;;
-       m68k) bfd_target=m68k-aout ;;
-       esac
-       ;;
-sun)
-       case "${target_cpu}" in
-       m68k)   bfd_target=m68k-aout ;;
-       sparc)  bfd_target=sparc-aout ;;
-       esac
-       ;;
-dec)
-       case "${target_cpu}" in
-       mips) bfd_target=dec3100 ;;
-       vax) bfd_target=vax ;;
-       esac
-       ;;
-hp)
-       case "${target_cpu}" in
-       m68k)
-               case "${target_os}" in
-               hpux)   bfd_target=hp9000 ;;
-               bsd)    bfd_target=hp300bsd ;;
-               esac
-               ;;
-       esac
-       ;;
-sgi)
-       case "${target_cpu}" in
-       mips)
-               bfd_target=irix3 ;;
-       esac
-       ;;
-none|nyu)
-       case "${target_cpu}" in
-       i386) bfd_target=i386-coff ;;
-       a29k) case "${target_os}" in
-               aout) bfd_target=a29k-aout ;;
-               coff) bfd_target=a29k-coff ;;
-               sym1) bfd_target=a29k-coff ;;
-              esac
-              ;;
-       tahoe | vax) bfd_target=${target_cpu} ;;
-       esac
-       ;;
-*)
-       case "${target_cpu}" in
-       tahoe | vax) bfd_target=${target_cpu} ;;
-       esac
-       ;;
-esac
-
-if [ ! -f config/t-${bfd_target} ] ; then
-       echo '***' BFD does not support target ${target}: no file config/t-${bfd_target}
-       exit 1
-fi
-
-target_makefile_frag=config/t-${bfd_target}
-
-files=
-links=
-## end of per-target part.
-
-               # Temporarily, we support only direct subdir builds.
-               hostsubdir=H-${host_alias}
-               targetsubdir=T-${target_alias}
-
-               if [ -n "${removing}" ] ; then
-                       if [ -n "${subdirs}" ] ; then
-                               if [ -d "${hostsubdir}" ] ; then
-                                       rm -rf ${hostsubdir}/${targetsubdir}
-
-                                       if [ -z "`(ls ${hostsubdir}) 2>&1 | grep Target- | grep -v Target-independent`" ] ; then
-                                               rm -rf ${hostsubdir}
-                                       fi
-                               else
-                                       echo Warning: no `pwd`/${hostsubdir} to remove.
-                               fi
-                       else
-                               rm -f ${Makefile} config.status ${links}
-                       fi
-               else
-                       if [ -n "${subdirs}" ] ; then
-                               # check for existing status before allowing forced subdirs.
-                               if [ -f ${Makefile} ] ; then
-                                       echo '***' "${Makefile} already exists in source directory.  `pwd` not configured." 1>&2
-                                       exit 1
-                               fi
-
-                               if [ ! -d ${hostsubdir} ] ; then mkdir ${hostsubdir} ; fi
-                               cd ${hostsubdir}
-
-                               if [ ! -d ${targetsubdir} ] ; then
-                                       if [ -z "${commontargets}" ] ; then
-                                               mkdir ${targetsubdir}
-                                       else
-                                               if [ ! -d Target-independent ] ; then
-                                                       mkdir Target-independent
-                                               fi
-
-                                               ${symbolic_link} Target-independent ${targetsubdir}
-                                       fi # if target independent
-                               fi # if no target dir yet
-
-                               cd ${targetsubdir}
-
-                               srcdir=../..
-                       else
-                               # if not subdir builds, then make sure none exist.
-                               if [ -n "`(ls .) 2>&1 | grep Host-`" ] ; then
-                                       echo '***' "Configured subdirs exist.  `pwd` not configured." 1>&2
-                                       exit 1
-                               fi
-                       fi
-
-                       # Find the source files, if location was not specified.
-                       if [ -z "${srcdir}" ] ; then
-                               srcdirdefaulted=1
-                               srcdir=.
-                               if [ -n "${srctrigger}" -a ! -r ${srctrigger} ] ; then
-                                       srcdir=..
-                               fi
-                       fi
-
-                       if [ -n "${srctrigger}" -a ! -r ${srcdir}/${srctrigger} ] ; then
-                               if [ -z "${srcdirdefaulted}" ] ; then
-                                       echo '***' "${progname}: Can't find ${srcname} sources in `pwd`/${srcdir}" 1>&2
-                               else
-                                       echo '***' "${progname}: Can't find ${srcname} sources in `pwd`/. or `pwd`/.." 1>&2
-                               fi
-
-                               echo '***' \(At least ${srctrigger} is missing.\) 1>&2
-                               exit 1
-                       fi
-
-                       # Set up the list of links to be made.
-                       # ${links} is the list of link names, and ${files} is the list of names to link to.
-
-                       # Make the links.
-                       while [ -n "${files}" ] ; do
-                               # set file to car of files, files to cdr of files
-                               set ${files}; file=$1; shift; files=$*
-                               set ${links}; link=$1; shift; links=$*
-
-                               if [ ! -r ${srcdir}/${file} ] ; then
-                                       echo '***' "${progname}: cannot create a link \"${link}\"," 1>&2
-                                       echo '***' "since the file \"${file}\" does not exist." 1>&2
-                                       exit 1
-                               fi
-
-                               ${remove} -f ${link}
-                               rm -f config.status
-                               # Make a symlink if possible, otherwise try a hard link
-                               ${symbolic_link} ${srcdir}/${file} ${link} 2>/dev/null || ${hard_link} ${srcdir}/${file} ${link}
-
-                               if [ ! -r ${link} ] ; then
-                                       echo '***' "${progname}: unable to link \"${link}\" to \"${srcdir}/${file}\"." 1>&2
-                                       exit 1
-                               fi
-
-                               if [ -n "${verbose}" ] ; then
-                                       echo "Linked \"${link}\" to \"${srcdir}/${file}\"."
-                               fi
-                       done
-
-                       # Create a .gdbinit file which runs the one in srcdir
-                       # and tells GDB to look there for source files.
-
-                       case ${srcdir} in
-                       .)
-                               ;;
-                       *)
-                               echo "dir ." > .gdbinit
-                               echo "dir ${srcdir}" >> .gdbinit
-                               echo "source ${srcdir}/.gdbinit" >> .gdbinit
-                               ;;
-                       esac
-
-                       # Install a makefile, and make it set VPATH
-                       # if necessary so that the sources are found.
-                       # Also change its value of srcdir.
-
-               # FIXME-someday: This business of always writing to .tem and mv back
-               # is so that I don't screw things up while developing.  Once this
-               # template is stable, these should be optimized. xoxorich.
-
-                       # Define macro CROSS_COMPILE in compilation if this is a cross-compiler.
-                       if [ "${host}" != "${target}" ] ; then
-                               echo "CROSS=-DCROSS_COMPILE" > ${Makefile}
-                               echo "ALL=start.encap" >> ${Makefile}
-                       else
-                               echo "ALL=all.internal" > ${Makefile}
-                       fi
-
-                       # set target, host, VPATH
-                       echo "host_alias = ${host_alias}" >> ${Makefile}
-                       echo "host_cpu = ${host_cpu}" >> ${Makefile}
-                       echo "host_vendor = ${host_vendor}" >> ${Makefile}
-                       echo "host_os = ${host_os}" >> ${Makefile}
-
-                       echo "target_alias = ${target_alias}" >> ${Makefile}
-                       echo "target_cpu = ${target_cpu}" >> ${Makefile}
-                       echo "target_vendor = ${target_vendor}" >> ${Makefile}
-                       echo "target_os = ${target_os}" >> ${Makefile}
-
-                       if [ -n "${subdirs}" ] ; then
-                               echo "subdir = /${hostsubdir}/${targetsubdir}" >> ${Makefile}
-                       else
-                               echo "subdir =" >> ${Makefile}
-                       fi
-
-               #       echo "workdir = `pwd`" >> ${Makefile}
-                       echo "VPATH = ${srcdir}" >> ${Makefile}
-
-                       # add "Makefile.in" (or whatever it's called)
-                       cat ${srcdir}/${Makefile_in} >> ${Makefile}
-
-                       # Conditionalize the makefile for this host.
-                       if [ -f ${srcdir}/${host_makefile_frag} ] ; then
-                               (echo "host_makefile_frag = ${srcdir}/${host_makefile_frag}" ; 
-                                       sed -e "/^####/  r ${srcdir}/${host_makefile_frag}" ${Makefile}) > Makefile.tem
-                               mv Makefile.tem ${Makefile}
-                       fi
-
-                       # Conditionalize the makefile for this target.
-                       if [ -f ${srcdir}/${target_makefile_frag} ] ; then
-                               (echo "target_makefile_frag = ${srcdir}/${target_makefile_frag}" ; 
-                                       sed -e "/^####/  r ${srcdir}/${target_makefile_frag}" ${Makefile}) > Makefile.tem
-                               mv Makefile.tem ${Makefile}
-                       fi
-
-                       # set srcdir
-                       sed "s@^srcdir = \.@srcdir = ${srcdir}@" ${Makefile} > Makefile.tem
-                       mv Makefile.tem ${Makefile}
-
-                       # set destdir
-                       if [ -n "${destdir}" ] ; then
-                               sed "s:^destdir =.*$:destdir = ${destdir}:" ${Makefile} > Makefile.tem
-                               mv Makefile.tem ${Makefile}
-                       fi
-
-                       # reset SUBDIRS
-                       sed "s:^SUBDIRS =.*$:SUBDIRS = ${configdirs}:" ${Makefile} > Makefile.tem
-                       mv Makefile.tem ${Makefile}
-
-                       # reset NONSUBDIRS
-                       sed "s:^NONSUBDIRS =.*$:NONSUBDIRS = ${noconfigdirs}:" ${Makefile} > Makefile.tem
-                       mv Makefile.tem ${Makefile}
-
-                       using=
-                       if [ -f ${srcdir}/${host_makefile_frag} ] ; then
-                               using=" using \"${host_makefile_frag}\""
-                       fi
-
-                       # remove any form feeds.
-                       sed -e "s/\f//" ${Makefile} > Makefile.tem
-                       mv Makefile.tem ${Makefile}
-
-                       if [ -f ${srcdir}/${target_makefile_frag} ] ; then
-                               if [ -z "${using}" ] ; then
-                                       andusing=" using \"${target_makefile_frag}\""
-                               else
-                                       andusing="${using} and \"${target_makefile_frag}\""
-                               fi
-                       else
-                               andusing=${using}
-                       fi
-
-                       if [ -n "${verbose}" -o -z "${recurring}" ] ; then
-                               echo "Created \"${Makefile}\"" in `pwd`${andusing}.
-                       fi
-
-#### configure.in post-target parts come in here.
-
-## end of post-target part.
-
-                       # describe the chosen configuration in config.status.
-                       # Make that file a shellscript which will reestablish
-                       # the same configuration.  Used in Makefiles to rebuild
-                       # Makefiles.
-
-                       echo "#!/bin/sh
-# ${srcname} was configured as follows:
-${srcdir}/configure" ${arguments} `if [ -z "${norecursion}" ] ; then echo +norecursion ; else true ; fi` > config.status
-                       chmod a+x config.status
-
-                       originaldir=`pwd`
-                       cd ${srcdir}
-               fi
-
-               # If there are subdirectories, then recurse. 
-               if [ -z "${norecursion}" -a -n "${configdirs}" ] ; then 
-                       for configdir in ${configdirs} ; do
-                               if [ -n "${verbose}" ] ; then
-                                       echo Configuring ${configdir}...
-                               fi
-
-                               if [ -d ${configdir} ] ; then
-                                       (cd ${configdir} ;
-                                               ./configure +recurring ${host_alias} +target=${target_alias} \
-                                                       ${verbose} ${subdirs} ${removing} +destdir=${destdir}) \
-                                               | sed 's/^/     /'
-                               else
-                                       if [ -n "${verbose}" ] ; then
-                                               echo Warning: directory \"${configdir}\" is missing.
-                                       fi
-                               fi
-                       done
-               fi
-       done # for each target
-
-       # Now build a Makefile for this host.
-       if [ -n "${subdirs}" -a ! -n "${removing}" ] ; then
-               cd ${hostsubdir}
-               cat > GNUmakefile << E!O!F
-# Makefile generated by configure for host ${host_alias}.
-
-ALL := $(shell ls -d Target-*)
-
-%:
-       $(foreach subdir,$(ALL),$(MAKE) -C $(subdir) \$@ &&) true
-
-all:
-E!O!F
-               cd ..
-       fi
-done # for each host
-
-exit 0
-
-#
-# Local Variables:
-# fill-column: 131
-# End:
-#
-
-# end of configure
diff --git a/bfd/cplus-dem.c b/bfd/cplus-dem.c
deleted file mode 100755 (executable)
index edb9e39..0000000
+++ /dev/null
@@ -1,942 +0,0 @@
-/* Demangler for GNU C++ 
-   Copyright (C) 1989 Free Software Foundation, Inc.
-   written by James Clark (jjc@jclark.uucp)
-   
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 1, or (at your option)
-   any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software
-   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-/* This is for g++ 1.36.1 (November 6 version). It will probably
-   require changes for any other version.
-
-   Modified for g++ 1.36.2 (November 18 version).  */
-
-/* This file exports one function
-
-   char *cplus_demangle (const char *name)
-   
-   If `name' is a mangled function name produced by g++, then
-   a pointer to a malloced string giving a C++ representation
-   of the name will be returned; otherwise NULL will be returned.
-   It is the caller's responsibility to free the string which
-   is returned.
-
-   For example,
-   
-   cplus_demangle ("_foo__1Ai")
-   
-   returns
-
-   "A::foo(int)"
-
-   This file imports xmalloc and xrealloc, which are like malloc and
-   realloc except that they generate a fatal error if there is no
-   available memory. */
-
-/* #define nounderscore 1 /* define this is names don't start with _ */
-
-#include <stdio.h>
-#include <string.h>
-#include <ctype.h>
-
-/* #include "misc.h" */
-
-#ifdef USG
-#include <memory.h>
-#else
-#define memcpy(s1, s2, n) strncpy(s1, s2, n) 
-#define memcmp(s1, s2, n) strncmp(s1, s2, n)
-#define strchr(s, c) index(s, c) 
-#endif
-
-#ifndef __STDC__
-#define const
-#endif
-
-#ifdef __STDC__
-extern char *cplus_demangle (const char *type);
-#else
-extern char *cplus_demangle ();
-#endif
-
-static char **typevec = 0;
-static int ntypes = 0;
-static int typevec_size = 0;
-
-static struct {
-  const char *in;
-  const char *out;
-} optable[] = {
-  "new", " new",
-  "delete", " delete",
-  "ne", "!=",
-  "eq", "==",
-  "ge", ">=",
-  "gt", ">",
-  "le", "<=",
-  "lt", "<",
-  "plus", "+",
-  "minus", "-",
-  "mult", "*",
-  "convert", "+",      /* unary + */
-  "negate", "-",       /* unary - */
-  "trunc_mod", "%",
-  "trunc_div", "/",
-  "truth_andif", "&&",
-  "truth_orif", "||",
-  "truth_not", "!",
-  "postincrement", "++",
-  "postdecrement", "--",
-  "bit_ior", "|",
-  "bit_xor", "^",
-  "bit_and", "&",
-  "bit_not", "~",
-  "call", "()",
-  "cond", "?:",
-  "alshift", "<<",
-  "arshift", ">>",
-  "component", "->",
-  "indirect", "*",
-  "method_call", "->()",
-  "addr", "&",         /* unary & */
-  "array", "[]",
-  "nop", "",                   /* for operator= */
-};
-
-/* Beware: these aren't '\0' terminated. */
-
-typedef struct {
-  char *b;                     /* pointer to start of string */
-  char *p;                     /* pointer after last character */
-  char *e;                     /* pointer after end of allocated space */
-} string;
-
-#ifdef __STDC__
-static void string_need (string *s, int n);
-static void string_delete (string *s);
-static void string_init (string *s);
-static void string_clear (string *s);
-static int string_empty (string *s);
-static void string_append (string *p, const char *s);
-static void string_appends (string *p, string *s);
-static void string_appendn (string *p, const char *s, int n);
-static void string_prepend (string *p, const char *s);
-#if 0
-static void string_prepends (string *p, string *s);
-#endif
-static void string_prependn (string *p, const char *s, int n);
-static int get_count (const char **type, int *count);
-static int do_args (const char **type, string *decl);
-static int do_type (const char **type, string *result);
-static int do_arg (const char **type, string *result);
-static int do_args (const char **type, string *decl);
-static void munge_function_name (string *name);
-#else
-static void string_need ();
-static void string_delete ();
-static void string_init ();
-static void string_clear ();
-static int string_empty ();
-static void string_append ();
-static void string_appends ();
-static void string_appendn ();
-static void string_prepend ();
-static void string_prepends ();
-static void string_prependn ();
-static int get_count ();
-static int do_args ();
-static int do_type ();
-static int do_arg ();
-static int do_args ();
-static void munge_function_name ();
-#endif
-
-char *
-cplus_demangle (type)
-     const char *type;
-{
-  string decl;
-  int n;
-  int success = 0;
-  int constructor = 0;
-  int const_flag = 0;
-  int i;
-  const char *p, *premangle;
-
-  if (type == NULL || *type == '\0')
-    return NULL;
-#ifndef nounderscore
-  if (*type++ != '_')
-    return NULL;
-#endif
-  p = type;
-  while (*p != '\0' && !(*p == '_' && p[1] == '_'))
-    p++;
-  if (*p == '\0')
-    {
-      /* destructor */
-      if (type[0] == '_' && type[1] == '$' && type[2] == '_')
-       {
-         unsigned int l = (strlen (type) - 3)*2 + 3 + 2 + 1;
-         char *tem = (char *) zalloc (l);
-         strcpy (tem, type + 3);
-         strcat (tem, "::~");
-         strcat (tem, type + 3);
-         strcat (tem, "()");
-         return tem;
-       }
-      /* static data member */
-      if (*type != '_' && (p = (char *) strchr (type, '$')) != NULL)
-       {
-         int n = strlen (type) + 2;
-         char *tem = (char *) xmalloc (n);
-         memcpy (tem, type, p - type);
-         strcpy (tem + (p - type), "::");
-         strcpy (tem + (p - type) + 2, p + 1);
-         return tem;
-       }
-      /* virtual table */
-      if (type[0] == '_' && type[1] == 'v' && type[2] == 't' && type[3] == '$')
-       {
-         int n = strlen (type + 4) + 14 + 1;
-         char *tem = (char *) xmalloc (n);
-         strcpy (tem, type + 4);
-         strcat (tem, " virtual table");
-         return tem;
-       }
-      return NULL;
-    }
-
-  string_init (&decl);
-
-  if (p == type)
-    {
-      if (!isdigit (p[2]))
-       {
-         string_delete (&decl);
-         return NULL;
-       }
-      constructor = 1;
-    }
-  else
-    {
-      string_appendn (&decl, type, p - type);
-      munge_function_name (&decl);
-    }
-  p += 2;
-
-  premangle = p;
-  switch (*p)
-    {
-    case 'C':
-      /* a const member function */
-      if (!isdigit (p[1]))
-       {
-         string_delete (&decl);
-         return NULL;
-       }
-      p += 1;
-      const_flag = 1;
-      /* fall through */
-    case '0':
-    case '1':
-    case '2':
-    case '3':
-    case '4':
-    case '5':
-    case '6':
-    case '7':
-    case '8':
-    case '9':
-      n = 0;
-      do
-       {
-         n *= 10;
-         n += *p - '0';
-         p += 1;
-       }
-      while (isdigit (*p));
-      if (strlen (p) < n)
-       {
-         string_delete (&decl);
-         return NULL;
-       }
-      if (constructor)
-       {
-         string_appendn (&decl, p, n);
-         string_append (&decl, "::");
-         string_appendn (&decl, p, n);
-       }
-      else
-       {
-         string_prepend (&decl, "::");
-         string_prependn (&decl, p, n);
-       }
-#ifndef LONGERNAMES
-      p = premangle;
-#else
-      p += n;
-#endif
-      success = do_args (&p, &decl);
-      if (const_flag)
-       string_append (&decl, " const");
-      break;
-    case 'F':
-      p += 1;
-      success = do_args (&p, &decl);
-      break;
-    }
-
-  for (i = 0; i < ntypes; i++)
-    if (typevec[i] != NULL)
-      free (typevec[i]);
-  ntypes = 0;
-  if (typevec != NULL)
-    {
-      free ((char *)typevec);
-      typevec = NULL;
-      typevec_size = 0;
-    }
-
-  if (success)
-    {
-      string_appendn (&decl, "", 1);
-      return decl.b;
-    }
-  else
-    {
-      string_delete (&decl);
-      return NULL;
-    }
-}
-
-static int
-get_count (type, count)
-     const char **type;
-     int *count;
-{
-  if (!isdigit (**type))
-    return 0;
-  *count = **type - '0';
-  *type += 1;
-  /* see flush_repeats in cplus-method.c */
-  if (isdigit (**type))
-    {
-      const char *p = *type;
-      int n = *count;
-      do 
-       {
-         n *= 10;
-         n += *p - '0';
-         p += 1;
-       } 
-      while (isdigit (*p));
-      if (*p == '_')
-       {
-         *type = p + 1;
-         *count = n;
-       }
-    }
-  return 1;
-}
-
-/* result will be initialised here; it will be freed on failure */
-
-static int
-do_type (type, result)
-     const char **type;
-     string *result;
-{
-  int n;
-  int done;
-  int non_empty = 0;
-  int success;
-  string decl;
-  const char *remembered_type;
-
-  string_init (&decl);
-  string_init (result);
-
-  done = 0;
-  success = 1;
-  while (success && !done)
-    {
-      int member;
-      switch (**type)
-       {
-       case 'P':
-         *type += 1;
-         string_prepend (&decl, "*");
-         break;
-
-       case 'R':
-         *type += 1;
-         string_prepend (&decl, "&");
-         break;
-
-       case 'T':
-         *type += 1;
-         if (!get_count (type, &n) || n >= ntypes)
-           success = 0;
-         else
-           {
-             remembered_type = typevec[n];
-             type = &remembered_type;
-           }
-         break;
-
-       case 'F':
-         *type += 1;
-         if (!string_empty (&decl) && decl.b[0] == '*')
-           {
-             string_prepend (&decl, "(");
-             string_append (&decl, ")");
-           }
-         if (!do_args (type, &decl) || **type != '_')
-           success = 0;
-         else
-           *type += 1;
-         break;
-
-       case 'M':
-       case 'O':
-         {
-           int constp = 0;
-           int volatilep = 0;
-
-           member = **type == 'M';
-           *type += 1;
-           if (!isdigit (**type))
-             {
-               success = 0;
-               break;
-             }
-           n = 0;
-           do
-             {
-               n *= 10;
-               n += **type - '0';
-               *type += 1;
-             } 
-           while (isdigit (**type));
-           if (strlen (*type) < n)
-             {
-               success = 0;
-               break;
-             }
-           string_append (&decl, ")");
-           string_prepend (&decl, "::");
-           string_prependn (&decl, *type, n);
-           string_prepend (&decl, "(");
-           *type += n;
-           if (member)
-             {
-               if (**type == 'C')
-                 {
-                   *type += 1;
-                   constp = 1;
-                 }
-               if (**type == 'V')
-                 {
-                   *type += 1;
-                   volatilep = 1;
-                 }
-               if (*(*type)++ != 'F')
-                 {
-                   success = 0;
-                   break;
-                 }
-             }
-           if ((member && !do_args (type, &decl)) || **type != '_')
-             {
-               success = 0;
-               break;
-             }
-           *type += 1;
-           if (constp)
-             {
-               if (non_empty)
-                 string_append (&decl, " ");
-               else
-                 non_empty = 1;
-               string_append (&decl, "const");
-             }
-           if (volatilep)
-             {
-               if (non_empty)
-                 string_append (&decl, " ");
-               else
-                 non_empty = 1;
-               string_append (&decl, "volatilep");
-             }
-           break;
-         }
-
-       case 'C':
-         if ((*type)[1] == 'P')
-           {
-             *type += 1;
-             if (!string_empty (&decl))
-               string_prepend (&decl, " ");
-             string_prepend (&decl, "const");
-             break;
-           }
-
-         /* fall through */
-       default:
-         done = 1;
-         break;
-       }
-    }
-
-  done = 0;
-  non_empty = 0;
-  while (success && !done)
-    {
-      switch (**type)
-       {
-       case 'C':
-         *type += 1;
-         if (non_empty)
-           string_append (result, " ");
-         else
-           non_empty = 1;
-         string_append (result, "const");
-         break;
-       case 'U':
-         *type += 1;
-         if (non_empty)
-           string_append (result, " ");
-         else
-           non_empty = 1;
-         string_append (result, "unsigned");
-         break;
-       case 'V':
-         *type += 1;
-         if (non_empty)
-           string_append (result, " ");
-         else
-           non_empty = 1;
-         string_append (result, "volatile");
-         break;
-       default:
-         done = 1;
-         break;
-       }
-    }
-
-  if (success)
-    switch (**type)
-      {
-      case '\0':
-      case '_':
-       break;
-      case 'v':
-       *type += 1;
-       if (non_empty)
-         string_append (result, " ");
-       string_append (result, "void");
-       break;
-      case 'l':
-       *type += 1;
-       if (non_empty)
-         string_append (result, " ");
-       string_append (result, "long");
-       break;
-      case 'i':
-       *type += 1;
-       if (non_empty)
-         string_append (result, " ");
-       string_append (result, "int");
-       break;
-      case 's':
-       *type += 1;
-       if (non_empty)
-         string_append (result, " ");
-       string_append (result, "short");
-       break;
-      case 'c':
-       *type += 1;
-       if (non_empty)
-         string_append (result, " ");
-       string_append (result, "char");
-       break;
-      case 'r':
-       *type += 1;
-       if (non_empty)
-         string_append (result, " ");
-       string_append (result, "long double");
-       break;
-      case 'd':
-       *type += 1;
-       if (non_empty)
-         string_append (result, " ");
-       string_append (result, "double");
-       break;
-      case 'f':
-       *type += 1;
-       if (non_empty)
-         string_append (result, " ");
-       string_append (result, "float");
-       break;
-      case 'G':
-       *type += 1;
-       if (!isdigit (**type))
-         {
-           success = 0;
-           break;
-         }
-       /* fall through */
-      case '0':
-      case '1':
-      case '2':
-      case '3':
-      case '4':
-      case '5':
-      case '6':
-      case '7':
-      case '8':
-      case '9':
-       n = 0;
-       do
-         {
-           n *= 10;
-           n += **type - '0';
-           *type += 1;
-         }
-       while (isdigit (**type));
-       if (strlen (*type) < n)
-         {
-           success = 0;
-           break;
-         }
-       if (non_empty)
-         string_append (result, " ");
-       string_appendn (result, *type, n);
-       *type += n;
-       break;
-      default:
-       success = 0;
-       break;
-      }
-
-  if (success)
-    {
-      if (!string_empty (&decl))
-       {
-         string_append (result, " ");
-         string_appends (result, &decl);
-       }
-      string_delete (&decl);
-      return 1;
-    }
-  else
-    {
-      string_delete (&decl);
-      string_delete (result);
-      return 0;
-    }
-}
-
-/* `result' will be initialised in do_type; it will be freed on failure */
-
-static int
-do_arg (type, result)
-     const char **type;
-     string *result;
-{
-  char *tem;
-  int len;
-  const char *start;
-  const char *end;
-
-  start = *type;
-  if (!do_type (type, result))
-    return 0;
-  end = *type;
-  if (ntypes >= typevec_size)
-    {
-      if (typevec_size == 0)
-       {
-         typevec_size = 3;
-         typevec = (char **) xmalloc (sizeof (char*)*typevec_size);
-       }
-      else
-       {
-         typevec_size *= 2;
-         typevec = (char **) realloc ((char *)typevec, sizeof (char*)*typevec_size);
-       }
-    }
-  len = end - start;
-  tem = (char *) xmalloc (len + 1);
-  memcpy (tem, start, len);
-  tem[len] = '\0';
-  typevec[ntypes++] = tem;
-  return 1;
-}
-
-/* `decl' must be already initialised, usually non-empty;
-   it won't be freed on failure */
-
-static int
-do_args (type, decl)
-     const char **type;
-     string *decl;
-{
-  string arg;
-  int need_comma = 0;
-  int dont_want_first;
-
-#ifndef LONGERNAMES
-  dont_want_first = 1;
-#else
-  dont_want_first = 0;
-#endif
-
-  string_append (decl, "(");
-
-  while (**type != '_' && **type != '\0' && **type != 'e' && **type != 'v')
-    {
-      if (**type == 'N')
-       {
-         int r;
-         int t;
-         *type += 1;
-         if (!get_count (type, &r) || !get_count (type, &t) || t >= ntypes)
-           return 0;
-         while (--r >= 0)
-           {
-             const char *tem = typevec[t];
-             if (need_comma)
-               string_append (decl, ", ");
-             if (!do_arg (&tem, &arg))
-               return 0;
-             string_appends (decl, &arg);
-             string_delete (&arg);
-             need_comma = 1;
-           }
-       }
-      else
-       {
-         if (need_comma)
-           string_append (decl, ", ");
-         if (!do_arg (type, &arg))
-           return 0;
-         if (dont_want_first)
-           dont_want_first = 0;
-         else
-           {
-             string_appends (decl, &arg);
-             need_comma = 1;
-           }
-         string_delete (&arg);
-       }
-    }
-
-  if (**type == 'v')
-    *type += 1;
-  else if (**type == 'e')
-    {
-      *type += 1;
-      if (need_comma)
-       string_append (decl, ",");
-      string_append (decl, "...");
-    }
-
-  string_append (decl, ")");
-  return 1;
-}
-
-static void
-munge_function_name (name)
-     string *name;
-{
-  if (!string_empty (name) && name->p - name->b >= 3 
-      && name->b[0] == 'o' && name->b[1] == 'p' && name->b[2] == '$')
-    {
-      int i;
-      /* see if it's an assignment expression */
-      if (name->p - name->b >= 10 /* op$assign_ */
-         && memcmp (name->b + 3, "assign_", 7) == 0)
-       {
-         for (i = 0; i < sizeof (optable)/sizeof (optable[0]); i++)
-           {
-             int len = name->p - name->b - 10;
-             if (strlen (optable[i].in) == len
-                 && memcmp (optable[i].in, name->b + 10, len) == 0)
-               {
-                 string_clear (name);
-                 string_append (name, "operator");
-                 string_append (name, optable[i].out);
-                 string_append (name, "=");
-                 return;
-               }
-           }
-       }
-      else
-       {
-         for (i = 0; i < sizeof (optable)/sizeof (optable[0]); i++)
-           {
-             int len = name->p - name->b - 3;
-             if (strlen (optable[i].in) == len 
-                 && memcmp (optable[i].in, name->b + 3, len) == 0)
-               {
-                 string_clear (name);
-                 string_append (name, "operator");
-                 string_append (name, optable[i].out);
-                 return;
-               }
-           }
-       }
-      return;
-    }
-  else if (!string_empty (name) && name->p - name->b >= 5
-          && memcmp (name->b, "type$", 5) == 0)
-    {
-      /* type conversion operator */
-      string type;
-      const char *tem = name->b + 5;
-      if (do_type (&tem, &type))
-       {
-         string_clear (name);
-         string_append (name, "operator ");
-         string_appends (name, &type);
-         string_delete (&type);
-         return;
-       }
-    }
-}
-
-/* a mini string-handling package */
-
-static void
-string_need (s, n)
-     string *s;
-     int n;
-{
-  if (s->b == NULL)
-    {
-      if (n < 32)
-       n = 32;
-      s->p = s->b = (char *) xmalloc (n);
-      s->e = s->b + n;
-    }
-  else if (s->e - s->p < n)
-    {
-      int tem = s->p - s->b;
-      n += tem;
-      n *= 2;
-      s->b = (char *) realloc (s->b, n);
-      s->p = s->b + tem;
-      s->e = s->b + n;
-    }
-}
-
-static void
-string_delete (s)
-     string *s;
-{
-  if (s->b != NULL)
-    {
-      free (s->b);
-      s->b = s->e = s->p = NULL;
-    }
-}
-
-static void
-string_init (s)
-     string *s;
-{
-  s->b = s->p = s->e = NULL;
-}
-
-static void 
-string_clear (s)
-     string *s;
-{
-  s->p = s->b;
-}
-
-static int
-string_empty (s)
-     string *s;
-{
-  return s->b == s->p;
-}
-
-static void
-string_append (p, s)
-     string *p;
-     const char *s;
-{
-  int n;
-  if (s == NULL || *s == '\0')
-    return;
-  n = strlen (s);
-  string_need (p, n);
-  memcpy (p->p, s, n);
-  p->p += n;
-}
-
-static void
-string_appends (p, s)
-     string *p, *s;
-{
-  int n;
-  if (s->b == s->p)
-    return;
-  n = s->p - s->b;
-  string_need (p, n);
-  memcpy (p->p, s->b, n);
-  p->p += n;
-}
-
-static void
-string_appendn (p, s, n)
-     string *p;
-     const char *s;
-     int n;
-{
-  if (n == 0)
-    return;
-  string_need (p, n);
-  memcpy (p->p, s, n);
-  p->p += n;
-}
-
-static void
-string_prepend (p, s)
-     string *p;
-     const char *s;
-{
-  if (s == NULL || *s == '\0')
-    return;
-  string_prependn (p, s, strlen (s));
-}
-
-static void
-string_prependn (p, s, n)
-     string *p;
-     const char *s;
-     int n;
-{
-  char *q;
-
-  if (n == 0)
-    return;
-  string_need (p, n);
-  for (q = p->p - 1; q >= p->b; q--)
-    q[n] = q[0];
-  memcpy (p->b, s, n);
-  p->p += n;
-}
diff --git a/bfd/doc/Makefile b/bfd/doc/Makefile
deleted file mode 100755 (executable)
index 2ac5d43..0000000
+++ /dev/null
@@ -1,82 +0,0 @@
-.SUFFIXES: .texi .o .c .h .p .ip
-VPATH=..
-.c.texi:
-       ./scanit $< $@
-
-.h.texi:
-       ./scanit $< $@
-
-.c.p:
-       ./scanph $< $@
-
-.h.p:
-       ./scanph $< $@
-
-.c.ip:
-       ./scanph -i $< $@
-
-# main GDB source directory
-srcdir = ..
-
-TEXIDIR=${srcdir}/../texinfo/fsf
-
-DOCFILES = aoutx.texi  archive.texi archures.texi \
-       bfd.texi  cache.texi coffcode.texi \
-       core.texi  format.texi  libbfd.texi  \
-       opncls.texi  reloc.texi  section.texi  \
-       syms.texi  targets.texi init.texi ctor.texi
-       
-
-PROTOS = archive.p archures.p bfd.p \
-       coffcode.p core.p format.p \
-       libbfd.p opncls.p reloc.p \
-       section.p syms.p targets.p  \
-       format.p coffcode.p core.p machines.p init.p
-
-IPROTOS = cache.ip libbfd.ip reloc.ip init.ip archures.ip ctor.ip 
-
-# SRCDOC, SRCPROT, SRCIPROT only used to sidestep Sun Make bug in interaction 
-# between VPATH and suffix rules.  If you use GNU Make, perhaps other Makes,
-# you don't need these three:
-SRCDOC = aoutx.h  archive.c archures.c \
-       bfd.c  cache.c coffcode.h \
-       core.c  format.c  libbfd.c  \
-       opncls.c  reloc.c  section.c  \
-       syms.c  targets.c init.c
-
-SRCPROT = archive.c archures.c bfd.c \
-       coffcode.h core.c format.c \
-       libbfd.c opncls.c reloc.c \
-       section.c syms.c targets.c init.c
-
-SRCIPROT = cache.c libbfd.c reloc.c cpu-h8300.c  cpu-i960.c archures.c init.c ctor.c
-
-
-docs: protos bfd.info bfd.dvi bfd.ps
-
-protos: $(PROTOS) $(IPROTOS)
-       sed -f intobfd bfd-in.h  > bfd.h
-       sed -f tolibbfd libbfd-in.h  > libbfd.h
-       sed -f tolibcoff libcoff-in.h  > libcoff.h
-
-# Following three rules only for the benefit of Sun Make; see comment above
-$(DOCFILES) : $(SRCDOC)
-$(PROTOS) : $(SRCPROT)
-$(IPROTOS) : $(SRCIPROT)
-
-clean:
-       rm -f $(PROTOS) *.p *.ip *.h bfd.?? $(DOCFILES) bfd.dvi bfd.ps *~* *# bfd.??? 
-
-bfd.info: $(DOCFILES) bfd.texinfo
-       makeinfo bfd.texinfo
-
-bfd.dvi: $(DOCFILES) bfd.texinfo
-       TEXINPUTS=${TEXIDIR}:.:$$TEXINPUTS tex bfd.texinfo
-       texindex bfd.??
-       TEXINPUTS=${TEXIDIR}:.:$$TEXINPUTS tex bfd.texinfo
-
-bfd.ps: bfd.dvi
-       dvips bfd -o
-       
-quickdoc: $(DOCFILES) bfd.texinfo
-       TEXINPUTS=${TEXIDIR}:.:$$TEXINPUTS tex bfd.texinfo
diff --git a/bfd/doc/awkscan b/bfd/doc/awkscan
deleted file mode 100755 (executable)
index 69b0cea..0000000
+++ /dev/null
@@ -1,12 +0,0 @@
-# NOTE: BEGIN pattern gives errors if other than 1st line; 
-# END ditto if other than last.
-BEGIN { print "@c ------------------------------START TEXT FROM " FILENAME }
-#
-# Keep /*doc* blocks (terminated by either */ or *-*/)
-/^\/\*doc\*/,/^\*\/|^\*-\*\//
-#
-# Also keep two kinds of /*proto blocks
-/^\/\*proto\*/,/^\*\/|^\*-\*\//
-/^\/\*proto-internal\*/,/^\*\/|^\*-\*\//
-#
-END { print "@c ------------------------------END TEXT FROM " FILENAME }
diff --git a/bfd/doc/awkscan-ip b/bfd/doc/awkscan-ip
deleted file mode 100755 (executable)
index 73bd61f..0000000
+++ /dev/null
@@ -1,8 +0,0 @@
-# Awk filter, 1st filter for BFD internal prototype file extraction
-#
-# keep /*proto-internal blocks
-/^\/\*proto-internal\*/,/^\*\/|^\*-\*\//
-#
-# Apparent bug in sed can discard last line in some situations; therefore
-# make last line harmless.
-END { print "\n" }
diff --git a/bfd/doc/awkscan-p b/bfd/doc/awkscan-p
deleted file mode 100755 (executable)
index c7fe79f..0000000
+++ /dev/null
@@ -1,8 +0,0 @@
-# Awk filter, 1st filter for BFD prototype file extraction
-#
-# keep /*proto blocks
-/^\/\*proto\*/,/^\*\/|^\*-\*\//
-#
-# Apparent bug in sed can discard last line in some situations; therefore
-# make last line harmless.
-END { print "\n" }
diff --git a/bfd/doc/bfd.info b/bfd/doc/bfd.info
deleted file mode 100644 (file)
index 529d69d..0000000
+++ /dev/null
@@ -1,67 +0,0 @@
-Info file bfd.info, produced by Makeinfo, -*- Text -*- from input file
-bfd.texinfo.
-
-   This file documents the BFD library.
-
-   Copyright (C) 1991 Free Software Foundation, Inc.
-
-   Permission is granted to make and distribute verbatim copies of
-this manual provided the copyright notice and this permission notice
-are preserved on all copies.
-
-   Permission is granted to copy and distribute modified versions of
-this manual under the conditions for verbatim copying, subject to the
-terms of the GNU General Public License, which includes the provision
-that the entire resulting derived work is distributed under the terms
-of a permission notice identical to this one.
-
-   Permission is granted to copy and distribute translations of this
-manual into another language, under the above conditions for modified
-versions.
-\1f
-Indirect:
-bfd.info-1: 821
-bfd.info-2: 44533
-bfd.info-3: 89652
-\1f
-Tag Table:
-(Indirect)
-Node: Top\7f823
-Node: Overview\7f1086
-Node: History\7f1985
-Node: How It Works\7f2937
-Node: What BFD Version 1 Can Do\7f4363
-Node: BFD information loss\7f5388
-Node: Mechanism\7f8002
-Node: BFD front end\7f12332
-Node: Memory Usage\7f17576
-Node: Initialization\7f18818
-Node: Sections\7f19432
-Node: Section Input\7f19910
-Node: Section Output\7f21190
-Node: typedef asection\7f22559
-Node: section prototypes\7f27347
-Node: Symbols\7f30865
-Node: Reading Symbols\7f32454
-Node: Writing Symbols\7f33410
-Node: typedef asymbol\7f34939
-Node: symbol handling functions\7f38386
-Node: Archives\7f40232
-Node: Formats\7f41678
-Node: Relocations\7f43795
-Node: typedef arelent\7f44535
-Node: howto manager\7f56584
-Node: Core Files\7f57569
-Node: Targets\7f58466
-Node: bfd_target\7f60218
-Node: Architectures\7f68923
-Node: Opening and Closing\7f76770
-Node: Internal\7f78654
-Node: File Caching\7f81129
-Node: BFD back end\7f83617
-Node: What to Put Where\7f83810
-Node: aout\7f83946
-Node: coff\7f89654
-Node: Index\7f100603
-\1f
-End Tag Table
diff --git a/bfd/doc/bfdinfo b/bfd/doc/bfdinfo
deleted file mode 100755 (executable)
index 5bb06ff..0000000
+++ /dev/null
@@ -1,1281 +0,0 @@
-Info file bfdinfo, produced by Makeinfo, -*- Text -*- from input file
-bfd.texinfo.
-
-   This file documents the BFD library.
-
-   Copyright (C) 1991 Free Software Foundation, Inc.
-
-   Permission is granted to make and distribute verbatim copies of
-this manual provided the copyright notice and this permission notice
-are preserved on all copies.
-
-   Permission is granted to copy and distribute modified versions of
-this manual under the conditions for verbatim copying, subject to the
-terms of the GNU General Public License, which includes the provision
-that the entire resulting derived work is distributed under the terms
-of a permission notice identical to this one.
-
-   Permission is granted to copy and distribute translations of this
-manual into another language, under the above conditions for modified
-versions.
-
-\1f
-File: bfdinfo,  Node: Top,  Next: Overview,  Prev: (dir),  Up: (dir)
-
-   This file documents the binary file descriptor library libbfd.
-
-* Menu:
-
-* Overview::                   Overview of BFD
-* History::                    History of BFD
-* Backends::                   Backends
-* Porting::                    Porting
-* Future::                     Future
-* Index::                      Index
-
-BFD body:
-* Memory usage::
-* Sections::
-* Symbols::
-* Archives::
-* Formats::
-* Relocations::
-* Core Files::
-* Targets::
-* Architecturs::
-* Opening and Closing::
-* Internal::
-* File Caching::
-
-BFD backends:
-* a.out backends::
-* coff backends::
-
-\1f
-File: bfdinfo,  Node: Overview,  Next: History,  Prev: Top,  Up: Top
-
-Introduction
-************
-
-   Simply put, BFD is a package which allows applications to use the
-same routines to operate on object files whatever the object file
-format.  A different object file format can be supported simply by
-creating a new BFD back end and adding it to the library.
-
-   BFD is split into two parts; the front end and the many back ends.
-
-   * memory, and various canonical data structures. The front end also
-     decides which back end to use, and when to call back end routines.
-
-   * end provides a set of calls which the BFD front end can use to
-     maintain its canonical form. The back ends also may keep around
-     information for their own use, for greater efficiency.
-
-\1f
-File: bfdinfo,  Node: History,  Next: How It Works,  Prev: Overview,  Up: Top
-
-History
-=======
-
-   One spur behind BFD was the desire, on the part of the GNU 960 team
-at Intel Oregon, for interoperability of applications on their COFF and
-b.out file formats.  Cygnus was providing GNU support for the team, and
-Cygnus was contracted to provide the required functionality.
-
-   The name came from a conversation David Wallace was having with
-Richard Stallman about the library: RMS said that it would be quite
-hard--David said "BFD".  Stallman was right, but the name stuck.
-
-   At the same time, Ready Systems wanted much the same thing, but for
-different object file formats: IEEE-695, Oasys, Srecords, a.out and 68k
-coff.
-
-   BFD was first implemented by Steve Chamberlain (steve@cygnus.com),
-John Gilmore (gnu@cygnus.com),  K. Richard Pixley (rich@cygnus.com) and
-David Wallace (gumby@cygnus.com) at Cygnus Support in Palo Alto,
-California.
-
-\1f
-File: bfdinfo,  Node: How It Works,  Next: History,  Prev: Porting,  Up: Top
-
-How It Works
-============
-
-   To use the library, include `bfd.h' and link with `libbfd.a'.       
-
-   BFD provides a common interface to the parts of an object file for
-a calling application.
-
-   When an application sucessfully opens a target file (object,
-archive or whatever) a pointer to an internal structure is returned.
-This pointer points to a structure called `bfd', described in
-`include/bfd.h'.  Our convention is to call this pointer a BFD, and
-instances of it within code `abfd'.  All operations on the target
-object file are applied as methods to the BFD.  The mapping is defined
-within `bfd.h' in a set of macros, all beginning `bfd'_.
-
-   For example, this sequence would do what you would probably expect:
-return the number of sections in an object file attached to a BFD
-`abfd'.
-
-
-     #include "bfd.h"
-     
-     unsigned int number_of_sections(abfd)
-     bfd *abfd;
-     {
-       return bfd_count_sections(abfd);
-     }
-
-   lisp
-
-   The abstraction used within BFD is that an object file has a header,
-a number of sections containing raw data, a set of relocations, and
-some symbol information. Also, BFDs opened for archives have the
-additional attribute of an index and contain subordinate BFDs. This
-approach is fine for a.out and coff, but loses efficiency when applied
-to formats such as S-records and IEEE-695.
-
-What BFD Version 1 Can Do
-=========================
-
-   As different information from the the object files is required, BFD
-reads from different sections of the file and processes them.  For
-example a very common operation for the linker is processing symbol
-tables.  Each BFD back end provides a routine for converting between
-the object file's representation of symbols and an internal canonical
-format. When the linker asks for the symbol table of an object file,
-it calls through the memory pointer to the relevant BFD back end
-routine which reads and converts the table into a canonical form.  The
-linker then operates upon the canonical form. When the link is
-finished and the linker writes the output file's symbol table, another
-BFD back end routine is called which takes the newly created symbol
-table and converts it into the chosen output format.
-
-\1f
-File: bfdinfo,  Node: BFD information loss,  Next: Mechanism,  Prev: BFD outline,  Up: BFD
-
-Information Loss
-----------------
-
-   *Some information is lost due to the nature of the file format.*
-The output targets supported by BFD do not provide identical
-facilities, and information which may be described in one form has
-nowhere to go in another format. One example of this is alignment
-information in `b.out'. There is nowhere in an `a.out' format file to
-store alignment information on the contained data, so when a file is
-linked from `b.out' and an `a.out' image is produced, alignment
-information will not propagate to the output file. (The linker will
-still use the alignment information internally, so the link is
-performed correctly).
-
-   Another example is COFF section names. COFF files may contain an
-unlimited number of sections, each one with a textual section name. If
-the target of the link is a format which does not have many sections
-(eg `a.out') or has sections without names (eg the Oasys format) the
-link cannot be done simply. You can circumvent this problem by
-describing the desired input-to-output section mapping with the linker
-command language.
-
-   *Information can be lost during canonicalization.* The BFD internal
-canonical form of the external formats is not exhaustive; there are
-structures in input formats for which there is no direct
-representation internally.  This means that the BFD back ends cannot
-maintain all possible data richness through the transformation between
-external to internal and back to external formats.
-
-   This limitation is only a problem when an application reads one
-format and writes another.  Each BFD back end is responsible for
-maintaining as much data as possible, and the internal BFD canonical
-form has structures which are opaque to the BFD core, and exported
-only to the back ends. When a file is read in one format, the
-canonical form is generated for BFD and the application. At the same
-time, the back end saves away any information which may otherwise be
-lost. If the data is then written back in the same format, the back
-end routine will be able to use the canonical form provided by the BFD
-core as well as the information it prepared earlier.  Since there is a
-great deal of commonality between back ends, this mechanism is very
-useful. There is no information lost for this reason when linking or
-copying big endian COFF to little endian COFF, or `a.out' to `b.out'. 
-When a mixture of formats is linked, the information is only lost from
-the files whose format differs from the destination.
-
-\1f
-File: bfdinfo,  Node: Mechanism,  Prev: BFD information loss,  Up: BFD
-
-Mechanism
----------
-
-   The greatest potential for loss of information is when there is
-least overlap between the information provided by the source format,
-that stored by the canonical format, and the information needed by the
-destination format. A brief description of the canonical form may help
-you appreciate what kinds of data you can count on preserving across
-conversions.
-
-*files*
-     Information on target machine architecture, particular
-     implementation and format type are stored on a per-file basis.
-     Other information includes a demand pageable bit and a write
-     protected bit.  Note that information like Unix magic numbers is
-     not stored here--only the magic numbers' meaning, so a `ZMAGIC'
-     file would have both the demand pageable bit and the write
-     protected text bit set.  The byte order of the target is stored
-     on a per-file basis, so that big- and little-endian object files
-     may be linked with one another.
-
-*sections*
-     Each section in the input file contains the name of the section,
-     the original address in the object file, various flags, size and
-     alignment information and pointers into other BFD data structures.
-
-*symbols*
-     Each symbol contains a pointer to the object file which originally
-     defined it, its name, its value, and various flag bits.  When a
-     BFD back end reads in a symbol table, the back end relocates all
-     symbols to make them relative to the base of the section where
-     they were defined.  This ensures that each symbol points to its
-     containing section.  Each symbol also has a varying amount of
-     hidden data to contain private data for the BFD back end.  Since
-     the symbol points to the original file, the private data format
-     for that symbol is accessible.  `gld' can operate on a collection
-     of symbols of wildly different formats without problems.
-
-     Normal global and simple local symbols are maintained on output,
-     so an output file (no matter its format) will retain symbols
-     pointing to functions and to global, static, and common
-     variables.  Some symbol information is not worth retaining; in
-     `a.out' type information is stored in the symbol table as long
-     symbol names.  This information would be useless to most COFF
-     debuggers; the linker has command line switches to allow users to
-     throw it away.
-
-     There is one word of type information within the symbol, so if the
-     format supports symbol type information within symbols (for
-     example COFF, IEEE, Oasys) and the type is simple enough to fit
-     within one word (nearly everything but aggregates) the
-     information will be preserved.
-
-*relocation level*
-     Each canonical BFD relocation record contains a pointer to the
-     symbol to relocate to, the offset of the data to relocate, the
-     section the data is in and a pointer to a relocation type
-     descriptor. Relocation is performed effectively by message
-     passing through the relocation type descriptor and symbol
-     pointer. It allows relocations to be performed on output data
-     using a relocation method only available in one of the input
-     formats. For instance, Oasys provides a byte relocation format. 
-     A relocation record requesting this relocation type would point
-     indirectly to a routine to perform this, so the relocation may be
-     performed on a byte being written to a COFF file, even though 68k
-     COFF has no such relocation type.
-
-*line numbers*
-     Object formats can contain, for debugging purposes, some form of
-     mapping between symbols, source line numbers, and addresses in
-     the output file.  These addresses have to be relocated along with
-     the symbol information.  Each symbol with an associated list of
-     line number records points to the first record of the list.  The
-     head of a line number list consists of a pointer to the symbol,
-     which allows divination of the address of the function whose line
-     number is being described. The rest of the list is made up of
-     pairs: offsets into the section and line numbers. Any format
-     which can simply derive this information can pass it successfully
-     between formats (COFF, IEEE and Oasys).
-
-\1f
-File: bfdinfo,  Node: BFD front end,  Next: BFD back end,  Prev: Mechanism,  Up: Top
-
-BFD front end
-*************
-
-typedef bfd
-===========
-
-   Pointers to bfd structs are the cornerstone of any application using
-`libbfd'. References though the BFD and to data in the BFD give the
-entire BFD functionality.
-
-   Here is the BFD struct itself.  This contains the major data about
-the file, and contains pointers to the rest of the data.
-
-     struct _bfd 
-     {
-
-   The filename the application opened the BFD with.
-
-       CONST char *filename;
-
-   A pointer to the target jump table.
-
-       struct bfd_target *xvec;
-
-   To avoid dragging too many header files into every file that
-includes `bfd.h', IOSTREAM has been declared as a "char *", and MTIME
-as a "long".  Their correct types, to which they are cast when used,
-are "FILE *" and "time_t".
-
-   The iostream is the result of an fopen on the filename.
-
-       char *iostream;
-
-   Is the file being cached *Note File Caching::.
-
-       boolean cacheable;
-
-   Marks whether there was a default target specified when the BFD was
-opened. This is used to select what matching algorithm to use to chose
-the back end.
-
-       boolean target_defaulted;
-
-   The caching routines use these to maintain a least-recently-used
-list of BFDs (*note File Caching::.).
-
-       struct _bfd *lru_prev, *lru_next;
-
-   When a file is closed by the caching routines, BFD retains state
-information on the file here:
-
-       file_ptr where;
-
-   and here:
-
-       boolean opened_once;
-
-       boolean mtime_set;
-
-   File modified time
-
-       long mtime;
-
-   Reserved for an unimplemented file locking extension.
-
-     int ifd;
-
-   The format which belongs to the BFD.
-
-       bfd_format format;
-
-   The direction the BFD was opened with
-
-       enum bfd_direction {no_direction = 0,
-                            read_direction = 1,
-                            write_direction = 2,
-                            both_direction = 3} direction;
-
-   Format_specific flags
-
-       flagword flags;
-
-   Currently my_archive is tested before adding origin to anything. I
-believe that this can become always an add of origin, with origin set
-to 0 for non archive files.
-
-       file_ptr origin;
-
-   Remember when output has begun, to stop strange things happening.
-
-       boolean output_has_begun;
-
-   Pointer to linked list of sections
-
-       struct sec  *sections;
-
-   The number of sections
-
-       unsigned int section_count;
-
-   Stuff only useful for object files: The start address.
-
-       bfd_vma start_address;
-
-   Used for input and output
-
-       unsigned int symcount;
-
-   Symbol table for output BFD
-
-       struct symbol_cache_entry  **outsymbols;
-
-   Architecture of object machine, eg m68k
-
-       enum bfd_architecture obj_arch;
-
-   Particular machine within arch, e.g. 68010
-
-       unsigned long obj_machine;
-
-   Stuff only useful for archives:
-
-       PTR arelt_data;              
-       struct _bfd *my_archive;     
-       struct _bfd *next;           
-       struct _bfd *archive_head;   
-       boolean has_armap;
-
-   Used by the back end to hold private data.
-
-       PTR tdata;
-
-   Used by the application to hold private data
-
-       PTR usrdata;
-
-   Where all the allocated stuff under this BFD goes (*note Memory
-Usage::.).
-
-       struct obstack memory;
-     };
-
-`bfd_set_start_address'
-.......................
-
-   Marks the entry point of an output BFD. Returns `true' on success,
-`false' otherwise.
-
-     boolean bfd_set_start_address(bfd *, bfd_vma);
-
-`bfd_get_mtime'
-...............
-
-   Return cached file modification time (e.g. as read from archive
-header for archive members, or from file system if we have been called
-before); else determine modify time, cache it, and return it.
-
-     long bfd_get_mtime(bfd *);
-
-`stuff'
-.......
-
-
-
-     #define bfd_sizeof_headers(abfd, reloc) \
-          BFD_SEND (abfd, _bfd_sizeof_headers, (abfd, reloc))
-     
-     #define bfd_find_nearest_line(abfd, section, symbols, offset, filename_ptr, func, line_ptr) \
-          BFD_SEND (abfd, _bfd_find_nearest_line,  (abfd, section, symbols, offset, filename_ptr, func, line_ptr))
-     
-     #define bfd_debug_info_start(abfd) \
-             BFD_SEND (abfd, _bfd_debug_info_start, (abfd))
-     
-     #define bfd_debug_info_end(abfd) \
-             BFD_SEND (abfd, _bfd_debug_info_end, (abfd))
-     
-     #define bfd_debug_info_accumulate(abfd, section) \
-             BFD_SEND (abfd, _bfd_debug_info_accumulate, (abfd, section))
-     
-     #define bfd_stat_arch_elt(abfd, stat) \
-             BFD_SEND (abfd, _bfd_stat_arch_elt,(abfd, stat))
-     
-     #define bfd_coff_swap_aux_in(a,e,t,c,i) \
-             BFD_SEND (a, _bfd_coff_swap_aux_in, (a,e,t,c,i))
-     
-     #define bfd_coff_swap_sym_in(a,e,i) \
-             BFD_SEND (a, _bfd_coff_swap_sym_in, (a,e,i))
-     
-     #define bfd_coff_swap_lineno_in(a,e,i) \
-             BFD_SEND ( a, _bfd_coff_swap_lineno_in, (a,e,i))
-
-   lisp
-
-\1f
-File: bfdinfo,  Node: Memory Usage,  Next: Sections,  Prev: bfd,  Up: Top
-
-Memory Usage
-============
-
-   BFD keeps all its internal structures in obstacks. There is one
-obstack per open BFD file, into which the current state is stored.
-When a BFD is closed, the obstack is deleted, and so everything which
-has been allocated by libbfd for the closing file will be thrown away.
-
-   BFD will not free anything created by an application, but pointers
-into `bfd' structures will be invalidated on a `bfd_close'; for
-example, after a `bfd_close' the vector passed to
-`bfd_canonicalize_symtab' will still be around, since it has been
-allocated by the application, but the data that it pointed to will be
-lost.
-
-   The general rule is not to close a BFD until all operations
-dependent upon data from the BFD have been completed, or all the data
-from within the file has been copied. To help with the management of
-memory, there is a function (`bfd_alloc_size') which returns the
-number of bytes in obstacks associated with the supplied BFD. This
-could be used to select the greediest open BFD, close it to reclaim
-the memory, perform some operation and reopen the BFD again, to get a
-fresh copy of the data structures.
-
-\1f
-File: bfdinfo,  Node: Sections,  Next: Symbols,  Prev: Memory Usage,  Up: Top
-
-Sections
-========
-
-   Sections are supported in BFD in `section.c'.
-
-   The raw data contained within a BFD is maintained through the
-section abstraction.  A single BFD may have any number of sections,
-and keeps hold of them by pointing to the first, each one points to
-the next in the list.
-
-* Menu:
-
-* Section Input::
-* Section Output::
-* typedef asection::
-* section prototypes::
-
-\1f
-File: bfdinfo,  Node: Section Input,  Next: Section Output,  Up: Sections
-
-Section Input
--------------
-
-   When a BFD is opened for reading, the section structures are created
-and attached to the BFD.
-
-   Each section has a name which describes the section in the outside
-world - for example, `a.out' would contain at least three sections,
-called `.text', `.data' and `.bss'.
-
-   Sometimes a BFD will contain more than the 'natural' number of
-sections. A back end may attach other sections containing constructor
-data, or an application may add a section (using bfd_make_section) to
-the sections attached to an already open BFD. For example, the linker
-creates a supernumary section `COMMON' for each input file's BFD to
-hold information about common storage.
-
-   The raw data is not necessarily read in at the same time as the
-section descriptor is created. Some targets may leave the data in
-place until a `bfd_get_section_contents' call is made. Other back ends
-may read in all the data at once - For example; an S-record file has
-to be read once to determine the size of the data. An IEEE-695 file
-doesn't contain raw data in sections, but data and relocation
-expressions intermixed, so the data area has to be parsed to get out
-the data and relocations.
-
-\1f
-File: bfdinfo,  Node: Section Output,  Next: typedef asection,  Prev: Section Input,  Up: Sections
-
-Section Output
---------------
-
-   To write a new object style BFD, the various sections to be written
-have to be created. They are attached to the BFD in the same way as
-input sections, data is written to the sections using
-`bfd_set_section_contents'.
-
-   The linker uses the fields `output_section' and `output_offset' to
-create an output file.
-
-   The data to be written comes from input sections attached to the
-output sections.  The output section structure can be considered a
-filter for the input section, the output section determines the vma of
-the output data and the name, but the input section determines the
-offset into the output section of the data to be written.
-
-   Eg to create a section "O", starting at 0x100, 0x123 long,
-containing two subsections, "A" at offset 0x0 (ie at vma 0x100) and
-"B" at offset 0x20 (ie at vma 0x120) the structures would look like:
-
-
-
-        section name          "A"
-          output_offset   0x00
-          size            0x20
-          output_section ----------->  section name    "O"
-                                  |    vma             0x100
-        section name          "B" |    size            0x123
-          output_offset   0x20    |
-          size            0x103   |
-          output_section  --------|
-
-   lisp
-
-\1f
-File: bfdinfo,  Node: typedef asection,  Next: section prototypes,  Prev: Section Output,  Up: Sections
-
-typedef asection
-----------------
-
-   The shape of a section struct:
-
-     typedef struct sec {
-
-   The name of the section, the name isn't a copy, the pointer is the
-same as that passed to bfd_make_section.
-
-         CONST char *name;
-
-   The next section in the list belonging to the BFD, or NULL.
-
-         struct sec *next;
-
-   The field flags contains attributes of the section. Some of these
-flags are read in from the object file, and some are synthesized from
-other information.
-
-     flagword flags;
-
-     #define SEC_NO_FLAGS   0x000
-
-   Tells the OS to allocate space for this section when loaded.  This
-would clear for a section containing debug information only.
-
-     #define SEC_ALLOC      0x001
-
-   Tells the OS to load the section from the file when loading.  This
-would be clear for a .bss section
-
-     #define SEC_LOAD       0x002
-
-   The section contains data still to be relocated, so there will be
-some relocation information too.
-
-     #define SEC_RELOC      0x004
-
-   Obsolete
-
-     #define SEC_BALIGN     0x008
-
-   A signal to the OS that the section contains read only data.
-
-     #define SEC_READONLY   0x010
-
-   The section contains code only.
-
-     #define SEC_CODE       0x020
-
-   The section contains data only.
-
-     #define SEC_DATA        0x040
-
-   The section will reside in ROM.
-
-     #define SEC_ROM        0x080
-
-   The section contains constructor information. This section type is
-used by the linker to create lists of constructors and destructors
-used by `g++'. When a back end sees a symbol which should be used in a
-constructor list, it creates a new section for the type of name (eg
-`__CTOR_LIST__'), attaches the symbol to it and builds a relocation.
-To build the lists of constructors, all the linker has to to is
-catenate all the sections called `__CTOR_LIST__' and relocte the data
-contained within - exactly the operations it would peform on standard
-data.
-
-     #define SEC_CONSTRUCTOR 0x100
-
-   The section is a constuctor, and should be placed at the end of the
-..
-
-     #define SEC_CONSTRUCTOR_TEXT 0x1100
-
-     #define SEC_CONSTRUCTOR_DATA 0x2100
-
-     #define SEC_CONSTRUCTOR_BSS  0x3100
-
-   The section has contents - a bss section could be `SEC_ALLOC' |
-`SEC_HAS_CONTENTS', a debug section could be `SEC_HAS_CONTENTS'
-
-     #define SEC_HAS_CONTENTS 0x200
-
-   An instruction to the linker not to output sections containing this
-flag even if they have information which would normally be written.
-
-     #define SEC_NEVER_LOAD 0x400
-
-   The base address of the section in the address space of the target.
-
-        bfd_vma vma;
-
-   The size of the section in bytes of the loaded section. This
-contains a value even if the section has no contents (eg, the size of
-`.bss').
-
-        bfd_size_type size;
-
-   If this section is going to be output, then this value is the
-offset into the output section of the first byte in the input section.
-Eg, if this was going to start at the 100th byte in the output
-section, this value would be 100.
-
-        bfd_vma output_offset;
-
-   The output section through which to map on output.
-
-        struct sec *output_section;
-
-   The alignment requirement of the section, as an exponent - eg 3
-aligns to 2^3 (or 8)
-
-        unsigned int alignment_power;
-
-   If an input section, a pointer to a vector of relocation records for
-the data in this section.
-
-        struct reloc_cache_entry *relocation;
-
-   If an output section, a pointer to a vector of pointers to
-relocation records for the data in this section.
-
-        struct reloc_cache_entry **orelocation;
-
-   The number of relocation records in one of the above
-
-        unsigned reloc_count;
-
-   Which section is it 0..nth
-
-        int index;
-
-   Information below is back end specific - and not always used or
-updated
-
-   File position of section data
-
-        file_ptr filepos;
-
-   File position of relocation info
-
-        file_ptr rel_filepos;
-
-   File position of line data
-
-        file_ptr line_filepos;
-
-   Pointer to data for applications
-
-        PTR userdata;
-
-        struct lang_output_section *otheruserdata;
-
-   Attached line number information
-
-        alent *lineno;
-
-   Number of line number records
-
-        unsigned int lineno_count;
-
-   When a section is being output, this value changes as more
-linenumbers are written out
-
-        file_ptr moving_line_filepos;
-
-   what the section number is in the target world
-
-        unsigned int target_index;
-
-        PTR used_by_bfd;
-
-   If this is a constructor section then here is a list of the
-relocations created to relocate items within it.
-
-        struct relent_chain *constructor_chain;
-
-   The BFD which owns the section.
-
-        bfd *owner;
-
-     } asection ;
-
-\1f
-File: bfdinfo,  Node: section prototypes,  Next: Section,  Prev: typedef section,  Up: Sections
-
-section prototypes
-------------------
-
-`bfd_get_section_by_name'
-.........................
-
-   Runs through the provided ABFD and returns the `asection' who's
-name matches that provided, otherwise NULL. *Note Sections::, for more
-information.
-
-     asection * bfd_get_section_by_name(bfd *abfd, CONST char *name);
-
-`bfd_make_section'
-..................
-
-   This function creates a new empty section called NAME and attaches
-it to the end of the chain of sections for the BFD supplied. An
-attempt to create a section with a name which is already in use,
-returns the old section by that name instead.
-
-   Possible errors are:
-
-`invalid_operation'
-     If output has already started for this BFD.
-
-`no_memory'
-     If obstack alloc fails.
-
-     asection * bfd_make_section(bfd *, CONST char *name);
-
-`bfd_set_section_flags'
-.......................
-
-   Attempts to set the attributes of the section named in the BFD
-supplied to the value. Returns true on success, false on error. 
-Possible error returns are:
-
-`invalid operation'
-     The section cannot have one or more of the attributes requested.
-     For example, a .bss section in `a.out' may not have the
-     `SEC_HAS_CONTENTS' field set.
-
-     boolean bfd_set_section_flags(bfd *, asection *, flagword);
-
-`bfd_map_over_sections'
-.......................
-
-   Calls the provided function FUNC for each section attached to the
-BFD ABFD, passing OBJ as an argument. The function will be called as
-if by
-
-       func(abfd, the_section, obj);
-
-     void bfd_map_over_sections(bfd *abfd, void (*func)(), PTR obj);
-
-   This is the prefered method for iterating over sections, an
-alternative would be to use a loop:
-
-        section *p;
-        for (p = abfd->sections; p != NULL; p = p->next)
-           func(abfd, p, ...)
-
-`bfd_set_section_size'
-......................
-
-   Sets SECTION to the size VAL. If the operation is ok, then `true'
-is returned, else `false'.
-
-   Possible error returns:
-
-`invalid_operation'
-     Writing has started to the BFD, so setting the size is invalid
-
-     boolean bfd_set_section_size(bfd *, asection *, bfd_size_type val);
-
-`bfd_set_section_contents'
-..........................
-
-   Sets the contents of the section SECTION in BFD ABFD to the data
-starting in memory at DATA. The data is written to the output section
-starting at offset OFFSET for COUNT bytes.
-
-   Normally `true' is returned, else `false'. Possible error returns
-are:
-
-`no_contents'
-     The output section does not have the `SEC_HAS_CONTENTS'
-     attribute, so nothing can be written to it.
-
-`and some more too'
-   This routine is front end to the back end function
-`_bfd_set_section_contents'.
-
-     boolean bfd_set_section_contents(bfd *abfd,        
-              asection *section,
-              PTR data,
-              file_ptr offset,
-              bfd_size_type count);
-
-`bfd_get_section_contents'
-..........................
-
-   This function reads data from SECTION in BFD ABFD into memory
-starting at LOCATION. The data is read at an offset of OFFSET from the
-start of the input section, and is read for COUNT bytes.
-
-   If the contents of a constuctor with the `SEC_CONSTUCTOR' flag set
-are requested, then the LOCATION is filled with zeroes.
-
-   If no errors occur, `true' is returned, else `false'.  Possible
-errors are:
-
-`unknown yet'
-     boolean bfd_get_section_contents(bfd *abfd, asection *section, PTR location,
-              file_ptr offset, bfd_size_type count);
-
-\1f
-File: bfdinfo,  Node: Symbols,  Next: Archives,  Prev: Sections,  Up: To
-
-Symbols
-=======
-
-   BFD trys to maintain as much symbol information as it can when it
-moves information from file to file. BFD passes information to
-applications though the `asymbol' structure. When the application
-requests the symbol table, BFD reads the table in the native form and
-translates parts of it into the internal format. To maintain more than
-the infomation passed to applications some targets keep some
-information 'behind the sceans', in a structure only the particular
-back end knows about. For example, the coff back end keeps the
-original symbol table structure as well as the canonical structure
-when a BFD is read in. On output, the coff back end can reconstruct
-the output symbol table so that no information is lost, even
-information unique to coff which BFD doesn't know or understand. If a
-coff symbol table was read, but was written through an a.out back end,
-all the coff specific information would be lost. (.. until BFD 2 :).
-
-   The symbol table of a BFD is not necessarily read in until a
-canonicalize request is made. Then the BFD back end fills in a table
-provided by the application with pointers to the canonical information.
-
-   To output symbols, the application provides BFD with a table of
-pointers to pointers to `asymbol's. This allows applications like the
-linker to output a symbol as read, since the 'behind the sceens'
-information will be still available.
-
-* Menu:
-
-* Reading Symbols::
-* Writing Symbols::
-* typedef asymbol::
-* symbol handling functions::
-
-\1f
-File: bfdinfo,  Node: Reading Symbols,  Next: Writing Symbols,  Prev: Symbols,  Up: Symbols
-
-Reading Symbols
----------------
-
-   There are two stages to reading a symbol table from a BFD;
-allocating storage, and the actual reading process. This is an excerpt
-from an appliction which reads the symbol table:
-
-
-       unsigned int storage_needed;
-       asymbol **symbol_table;
-       unsigned int number_of_symbols;
-       unsigned int i;
-     
-       storage_needed = get_symtab_upper_bound (abfd);
-     
-       if (storage_needed == 0) {
-          return ;
-       }
-       symbol_table = (asymbol **) malloc (storage_needed);
-         ...
-       number_of_symbols = 
-          bfd_canonicalize_symtab (abfd, symbol_table); 
-     
-       for (i = 0; i < number_of_symbols; i++) {
-          process_symbol (symbol_table[i]);
-       }
-
-   lisp
-
-   All storage for the symbols themselves is in an obstack connected to
-the BFD, and is freed when the BFD is closed.
-
-\1f
-File: bfdinfo,  Node: Writing Symbols,  Next: typedef asymbol,  Prev: Reading Symbols,  Up: Symbols
-
-Writing Symbols
----------------
-
-   Writing of a symbol table is automatic when a BFD open for writing
-is closed. The application attaches a vector of pointers to pointers
-to symbols to the BFD being written, and fills in the symbol count.
-The close and cleanup code reads through the table provided and
-performs all the necessary operations. The outputing code must always
-be provided with an 'owned' symbol; one which has come from another
-BFD, or one which has been created using `bfd_make_empty_symbol'.
-
-   An example showing the creation of a symbol table with only one
-element:
-
-
-     #include "bfd.h"
-     main() 
-     {
-       bfd *abfd;
-       asymbol *ptrs[2];
-       asymbol *new;
-     
-       abfd = bfd_openw("foo","a.out-sunos-big");
-       bfd_set_format(abfd, bfd_object);
-       new = bfd_make_empty_symbol(abfd);
-       new->name = "dummy_symbol";
-       new->section = (asection *)0;
-       new->flags = BSF_ABSOLUTE | BSF_GLOBAL;
-       new->value = 0x12345;
-     
-       ptrs[0] = new;
-       ptrs[1] = (asymbol *)0;
-     
-       bfd_set_symtab(abfd, ptrs, 1);
-       bfd_close(abfd);
-     }
-     
-     ./makesym 
-     nm foo
-     00012345 A dummy_symbol
-
-   lisp
-
-   Many formats cannot represent arbitary symbol information; for
-instance the `a.out' object format does not allow an arbitary number
-of sections. A symbol pointing to a section which is not one of
-`.text', `.data' or `.bss' cannot be described.
-
-\1f
-File: bfdinfo,  Node: typedef asymbol,  Next: symbol handling functions,  Prev: Writing Symbols,  Up: Symbols
-
-typedef asymbol
----------------
-
-   An `asymbol' has the form:
-
-     typedef struct symbol_cache_entry 
-     {
-
-   A pointer to the BFD which owns the symbol. This information is
-necessary so that a back end can work out what additional (invisible to
-the application writer) information is carried with the symbol.
-
-       struct _bfd *the_bfd;
-
-   The text of the symbol. The name is left alone, and not copied - the
-application may not alter it.
-
-        CONST char *name;
-
-   The value of the symbol.
-
-        symvalue value;
-
-   Attributes of a symbol:
-
-     #define BSF_NO_FLAGS    0x00
-
-   The symbol has local scope; `static' in `C'. The value is the
-offset into the section of the data.
-
-     #define BSF_LOCAL 0x01
-
-   The symbol has global scope; initialized data in `C'. The value is
-the offset into the section of the data.
-
-     #define BSF_GLOBAL        0x02
-
-   Obsolete
-
-     #define BSF_IMPORT        0x04
-
-   The symbol has global scope, and is exported. The value is the
-offset into the section of the data.
-
-     #define BSF_EXPORT        0x08
-
-   The symbol is undefined. `extern' in `C'. The value has no meaning.
-
-     #define BSF_UNDEFINED     0x10    
-
-   The symbol is common, initialized to zero; default in `C'. The
-value is the size of the object in bytes.
-
-     #define BSF_FORT_COMM     0x20    
-
-   A normal `C' symbol would be one of: `BSF_LOCAL', `BSF_FORT_COMM', 
-`BSF_UNDEFINED' or `BSF_EXPORT|BSD_GLOBAL'
-
-   The symbol is a debugging record. The value has an arbitary meaning.
-
-     #define BSF_DEBUGGING     0x40
-
-   The symbol has no section attached, any value is the actual value
-and is not a relative offset to a section.
-
-     #define BSF_ABSOLUTE      0x80
-
-   Used by the linker
-
-     #define BSF_KEEP        0x10000
-     #define BSF_KEEP_G      0x80000
-
-   Unused
-
-     #define BSF_WEAK        0x100000
-     #define BSF_CTOR        0x200000 
-     #define BSF_FAKE        0x400000
-
-   The symbol used to be a common symbol, but now it is allocated.
-
-     #define BSF_OLD_COMMON  0x800000
-
-   The default value for common data.
-
-     #define BFD_FORT_COMM_DEFAULT_VALUE 0
-
-   In some files the type of a symbol sometimes alters its location in
-an output file - ie in coff a `ISFCN' symbol which is also `C_EXT'
-symbol appears where it was declared and not at the end of a section. 
-This bit is set by the target BFD part to convey this information.
-
-     #define BSF_NOT_AT_END    0x40000
-
-   Signal that the symbol is the label of constructor section.
-
-     #define BSF_CONSTRUCTOR   0x1000000
-
-   Signal that the symbol is a warning symbol. If the symbol is a
-warning symbol, then the value field (I know this is tacky) will point
-to the asymbol which when referenced will cause the warning.
-
-     #define BSF_WARNING       0x2000000
-
-   Signal that the symbol is indirect. The value of the symbol is a
-pointer to an undefined asymbol which contains the name to use instead.
-
-     #define BSF_INDIRECT     0x4000000
-
-       flagword flags;
-
-   A pointer to the section to which this symbol is relative, or 0 if
-the symbol is absolute or undefined. Note that it is not sufficient to
-set this location to 0 to mark a symbol as absolute - the flag
-`BSF_ABSOLUTE' must be set also.
-
-       struct sec *section;
-
-   Back end special data. This is being phased out in favour of making
-this a union.
-
-       PTR udata;      
-     } asymbol;
-
-\1f
-File: bfdinfo,  Node: symbol handling functions,  Next: Symbols,  Prev: typedef asymbol,  Up: Symbols
-
-Symbol Handling Functions
--------------------------
-
-`get_symtab_upper_bound'
-........................
-
-   Returns the number of bytes required in a vector of pointers to
-`asymbols' for all the symbols in the supplied BFD, including a
-terminal NULL pointer. If there are no symbols in the BFD, then 0 is
-returned.
-
-
-     #define get_symtab_upper_bound(abfd) \
-          BFD_SEND (abfd, _get_symtab_upper_bound, (abfd))
-
-   lisp
-
-`bfd_canonicalize_symtab'
-.........................
-
-   Supplied a BFD and a pointer to an uninitialized vector of pointers. 
-This reads in the symbols from the BFD, and fills in the table with
-pointers to the symbols, and a trailing NULL. The routine returns the
-actual number of symbol pointers not including the NULL.
-
-
-     #define bfd_canonicalize_symtab(abfd, location) \
-          BFD_SEND (abfd, _bfd_canonicalize_symtab,\
-                       (abfd, location))
-
-   lisp
-
-`bfd_set_symtab'
-................
-
-   Provided a table of pointers to to symbols and a count, writes to
-the output BFD the symbols when closed.
-
-     boolean bfd_set_symtab(bfd *, asymbol **, unsigned int );
-
-`bfd_print_symbol_vandf'
-........................
-
-   Prints the value and flags of the symbol supplied to the stream
-file.
-
-     void bfd_print_symbol_vandf(PTR file, asymbol *symbol);
-
-`bfd_make_empty_symbol'
-.......................
-
-   This function creates a new `asymbol' structure for the BFD, and
-returns a pointer to it.
-
-   This routine is necessary, since each back end has private
-information surrounding the `asymbol'. Building your own `asymbol' and
-pointing to it will not create the private information, and will cause
-problems later on.
-
-
-     #define bfd_make_empty_symbol(abfd) \
-          BFD_SEND (abfd, _bfd_make_empty_symbol, (abfd))
-
-   lisp
-
-\1f
-File: bfdinfo,  Node: Archives,  Next: Formats,  Prev: Symbols,  Up: Top
-
-Archives
-========
-
-   Gumby, you promised to write this bit...
-
-   Archives are supported in BFD in `archive.c'.
-
-   An archive is represented internally just like another BFD, with a
-pointer to a chain of contained BFDs. Archives can be created by
-opening BFDs, linking them together and attaching them as children to
-another BFD and then closing the parent BFD.
-
-`bfd_get_next_mapent'
-.....................
-
-   What this does
-
-     symindex bfd_get_next_mapent(bfd *, symindex, carsym **);
-
-`bfd_set_archive_head'
-......................
-
-   Used whilst processing archives. Sets the head of the chain of BFDs
-contained in an archive to NEW_HEAD. (see chapter on archives)
-
-     boolean bfd_set_archive_head(bfd *output, bfd *new_head);
-
-`bfd_get_elt_at_index'
-......................
-
-   Return the sub bfd contained within the archive at archive index n.
-
-     bfd * bfd_get_elt_at_index(bfd *, int);
-
-`bfd_openr_next_archived_file'
-..............................
-
-   Initially provided a BFD containing an archive and NULL, opens a BFD
-on the first contained element and returns that. Subsequent calls to
-bfd_openr_next_archived_file should pass the archive and the previous
-return value to return a created BFD to the next contained element. 
-NULL is returned when there are no more.
-
-     bfd* bfd_openr_next_archived_file(bfd *archive, bfd *previous);
-
-\1f
-File: bfdinfo,  Node: Formats,  Next: Relocations,  Prev: Archives,  Up: Top
-
-File Formats
-============
-
-   A format is a BFD concept of high level file contents. The formats
-supported by BFD are:
-
-`bfd_object'
-     The BFD may contain data, symbols, relocations and debug info.
-
-`bfd_archive'
-     The 
\ No newline at end of file
diff --git a/bfd/doc/blins-p b/bfd/doc/blins-p
deleted file mode 100755 (executable)
index 858dcd7..0000000
+++ /dev/null
@@ -1,8 +0,0 @@
-# sed script for BFD header files
-# Merge adjacent blank lines.  Loop til no change.
-:blin
-/^$/,/^ *[^ ]*.*$/{
-/^$/N
-s/^ *\n *$//
-}
-t blin
diff --git a/bfd/doc/exfil1-p b/bfd/doc/exfil1-p
deleted file mode 100755 (executable)
index a57fc95..0000000
+++ /dev/null
@@ -1,5 +0,0 @@
-#
-# Locate and coalesce adjacent comments
-/\*\/$/N
-s/\*\/\n\/\*/\
-/
diff --git a/bfd/doc/exfil3-p b/bfd/doc/exfil3-p
deleted file mode 100755 (executable)
index c557a16..0000000
+++ /dev/null
@@ -1,16 +0,0 @@
-# blank-line activity:
-# Merge adjacent blank lines.  Loop til no change.
-:blin
-/^$/,/^ *[^ ]*.*$/{
-/^$/N
-s/^ *\n *$//
-}
-t blin
-#
-/^$/,/^ *[^ ]*.*$/{
-/^$/N
-# Transpose <blank line> <end comment>
-/^ *\n\*\/$/c\
-*\/\
-
-}
diff --git a/bfd/doc/exfilter b/bfd/doc/exfilter
deleted file mode 100755 (executable)
index 7551607..0000000
+++ /dev/null
@@ -1,14 +0,0 @@
-# SED script for preprocessing embedded doc from source (S. Chamberlain markup)
-# Final pass; cleanup work is done here.
-#
-# Within examples, make '{' and '}' printable:
-/^@lisp$/,/^@end lisp$/s/{/@{/
-/^@lisp$/,/^@end lisp$/s/}/@}/
-/^@example$/,/^@end example$/s/{/@{/
-/^@example$/,/^@end example$/s/}/@}/
-#
-# Delete empty @findex and @subsubsection entries (resulting from *proto*
-# with no further text on same line, in middle pass)
-/^@findex $/d
-/^@subsubsection @code{}/d
-#
diff --git a/bfd/doc/exfilter-p b/bfd/doc/exfilter-p
deleted file mode 100755 (executable)
index 27a1d05..0000000
+++ /dev/null
@@ -1,12 +0,0 @@
-# SED script for preprocessing embedded headers from C source comments 
-# (S. Chamberlain markup)
-# beginning of many passes of cleanup work 
-#
-# Delete empty comment blocks
-/^\/\*$/N
-/^\/\*\n\*\/ *$/d
-#
-# Locate and coalesce adjacent comments
-/\*\/$/N
-s/\*\/\n\/\*/\
-/
diff --git a/bfd/doc/exfiltst b/bfd/doc/exfiltst
deleted file mode 100755 (executable)
index 18bab5a..0000000
+++ /dev/null
@@ -1,8 +0,0 @@
-# Merge adjacent blank lines.  Loop til no change.
-:blin
-/^$/,/^ *[^ ]*.*$/{
-/^$/N
-s/^ *\n *$//
-}
-t blin
-
diff --git a/bfd/doc/exmerge b/bfd/doc/exmerge
deleted file mode 100755 (executable)
index dafa424..0000000
+++ /dev/null
@@ -1,4 +0,0 @@
-# SED script for preprocessing embedded doc from source (S. Chamberlain markup)
-# Locate and coalesce adjacent @example blocks
-/^@end example/N
-/^@end example\n@example$/d
diff --git a/bfd/doc/intobfd b/bfd/doc/intobfd
deleted file mode 100755 (executable)
index f72d8e9..0000000
+++ /dev/null
@@ -1,13 +0,0 @@
-/\/\*:init.c\*\//r init.p
-/\/\*:archive.c\*\//r archive.p
-/\/\*:archures.c\*\//r archures.p
-/\/\*:bfd.c\*\//r bfd.p
-/\/\*:core.c\*\//r core.p
-/\/\*:format.c\*\//r format.p
-/\/\*:libbfd.c\*\//r libbfd.p
-/\/\*:opncls.c\*\//r opncls.p
-/\/\*:reloc.c\*\//r reloc.p
-/\/\*:section.c\*\//r section.p
-/\/\*:syms.c\*\//r syms.p
-/\/\*:targets.c\*\//r targets.p
-
diff --git a/bfd/doc/mergecom-p b/bfd/doc/mergecom-p
deleted file mode 100755 (executable)
index 456478b..0000000
+++ /dev/null
@@ -1,5 +0,0 @@
-# SED script for preprocessing embedded headers from C source comments 
-# Locate and coalesce adjacent comments
-/\*\/$/N
-s/\*\/\n\/\*/\
-/
diff --git a/bfd/doc/movecom-p b/bfd/doc/movecom-p
deleted file mode 100755 (executable)
index 7ed04c7..0000000
+++ /dev/null
@@ -1,8 +0,0 @@
-# sed script for BFD header files:
-# Transpose <blank line> <end comment>
-/^$/,/^ *[^ ]*.*$/{
-/^$/N
-/^ *\n\*\/$/c\
-*\/\
-
-}
diff --git a/bfd/doc/scanit b/bfd/doc/scanit
deleted file mode 100755 (executable)
index a989c78..0000000
+++ /dev/null
@@ -1,25 +0,0 @@
-#!/bin/sh
-# Script to coordinate parsing of S. Chamberlain source-embedded 
-# documentation markup language.
-
-# Four passes:
-#      1) awk discards lines not intended for docn, and marks blocks of
-#         text with comments identifying source file;
-#      2) first sed pass interprets Chamberlain markup;
-#      3) second sed pass does cleanup that involves merging lines
-#      4) third sed pass does remaining cleans up---making {}
-#         printable within examples, and eliminating empty index entries and
-#          headings.
-#Third and second sed passes are separate because order of execution is hard
-#to control otherwise, making one or another of the things involving @example
-#inoperative.
-
-base=`echo $1 | cut -d '.' -f 1`
-out=`echo $2 | cut -d '.' -f 1`
-
-awk -f $3/awkscan $1 | \
-sed -f $3/sedscript | \
-sed -f $3/unPROTO | \
-sed -f $3/exmerge  | \
-sed -f $3/exfilter  >$out.texi
-
diff --git a/bfd/doc/scanph b/bfd/doc/scanph
deleted file mode 100755 (executable)
index 956c2e9..0000000
+++ /dev/null
@@ -1,25 +0,0 @@
-#!/bin/sh
-# Script to coordinate parsing of S. Chamberlain source-embedded 
-# header-file markup language. 
-
-# '-i' option means use *proto-internal* segments, else just *proto*
-SFX=p
-if [ $1 = "-i" ]; then
-       SFX=ip
-       shift
-fi
-
-out=`echo $2 | cut -d '.' -f 1`
-
-#  passes:
-#      1) awk discards lines not intended for header, and marks blocks of
-#         text with comments identifying source file;
-#      2) first sed pass interprets Chamberlain markup;
-#      3) further sed passes clean up---merging adjacent comments etc.
-
-awk -f $3/awkscan-$SFX $1 |\
-sed -f $3/sedscript-p |\
-sed -f $3/mergecom-p |\
-sed -f $3/startcom-p  |\
-sed -f $3/blins-p |\
-sed -f $3/movecom-p  >$out.$SFX
diff --git a/bfd/doc/sedscript b/bfd/doc/sedscript
deleted file mode 100755 (executable)
index cc2022c..0000000
+++ /dev/null
@@ -1,85 +0,0 @@
-# SED script for preprocessing embedded doc from source (S. Chamberlain markup)
-# middle pass; most of the work is done here.
-#
-# First, get rid of /*doc* markers; they've done their job in the first pass.
-/^\/\*doc\*/d
-#
-# /*proto* markers may be optionally followed by a *i-style subsubsec, findex
-# entry.  This will generate empty @findex and @subsubsection entries if
-# the *proto* is on a line by itself; third pass removes them.
-/^\/\*proto\*/s/^\/\*proto\* *\(.*\)$/@findex \1\
-@subsubsection @code{\1}/
-#
-# /*proto-internal* is just like /*proto* from doc point of view.
-/^\/\*proto-internal\*/s/^\/\*proto-internal\* *\(.*\)$/@findex \1\
-@subsubsection @code{\1}/
-#
-# *i at beginning of line: rest of line is both a subsubsection heading
-#   and an entry in function index.
-/^\*i/s/^\*i *\(.*\)$/@findex \1\
-@subsubsection @code{\1}/
-#
-# Two alternative docn block ends, '*/' and '*-*/' on lines by themselves;
-# replace by blank lines (for texinfo source readability).
-/^\*\/$/c\
-
-/^\*-\*\/$/c\
-
-# {* and *} are standins for comment markers (originally embedded in .c 
-# comments)---turn into real comment markers:
-s/{\*/\/\*/
-s/\*}/\*\//
-#
-# '*+++' and '*---' span a block of text that includes both example lines 
-# (marked by leading '$') and explanatory text (to be italicized).
-# Italicize lines lacking '$':
-/\*\+\+\+/,/\*---/s/^\([^$].*\)$/@i{\1}/
-#
-# We don't need *+++ and *--- markers any more; kill them (trailing marker
-# becomes blank line for readability)
-/\*\+\+\+/d
-/\*---/c\
-
-# Any line beginning with '$' is made an example line; third pass later 
-# coalesces adjacent example blocks.  *DO NOT* introduce extra space after
-# @end example, so we can spot adjacent ones in third pass.
-/^\$/i\
-@example
-/^\$/a\
-@end example
-#
-# In any example line, turn '{' and '}' into '@{' and '@}'
-###/^\$/s/{/@{/g
-###/^\$/s/}/@}/g
-#
-# Now delete the '$' markers themselves:
-/^\$/s/\$//
-#
-# *+ and *- delimit large examples to be enclosed in cartouches.
-/^\*\+$/c\
-@lisp\
-@c @cartouche
-/^\*-$/c\
-@c @end cartouche\
-@end lisp\
-
-# '*;' introduces an example which may have a single line or multiple lines;
-# it extends until the next semicolon (which is also printed).
-# One-line case: (do this first; else second line address for multi-line case
-# will include random text til we happen to end a line in a doc comment with
-# a semicolon)
-/^\*;.*;$/{
-s/^\*;/@example\
-/
-s/;$/;\
-@end example\
-/
-}
-# Multi-line case:
-/^\*;/,/.*;$/{
-s/^\*;/@example\
-/
-s/;$/;\
-@end example\
-/
-}
diff --git a/bfd/doc/sedscript-p b/bfd/doc/sedscript-p
deleted file mode 100755 (executable)
index 1f24900..0000000
+++ /dev/null
@@ -1,63 +0,0 @@
-# SED script for preprocessing embedded headers from source 
-# (S. Chamberlain markup)
-# middle pass; most of the work is done here.
-#
-# First, get rid of /*proto* markers; they've done their job in the first pass.
-# (They remain comment-introducers)
-/^\/\*proto\*/s/^\/\*proto\*/\/*/
-/^\/\*proto-internal\*/s/^\/\*proto-internal\*/\/*/
-#
-# *-*/ is an alternative (older) comment-block end.  Remap for uniformity:
-s/^\*-\*\//\*\//
-#
-# {* and *} are standins for comment markers (originally embedded in .c 
-# comments)---turn into real comment markers:
-s/{\*/\/\*/
-s/\*}/\*\//
-#
-# '*+++' and '*---' span a block of text that includes both header lines 
-# (marked by leading '$') and explanatory text (to be comments).
-# No need to start comment at "*+++", or end it at "*---", since we're 
-# already in a *proto* comment block.  Just delete.
-/\*\+\+\+/d
-/\*---/d
-#
-# Any line beginning with '$' is made a line of code in the header; 
-#  stuff in between is comments, so *precede* each '$' line with 
-#  END-comment, *follow* each '$' line with START-comment; third pass later 
-#  eliminates empty comment blocks.
-/^\$/i\
-*/
-/^\$/a\
-/*
-#
-# Now delete the '$' markers themselves:
-/^\$/s/\$//
-#
-# *+ and *- delimit larger blocks of code, treated the same as '$' lines
-/^\*\+$/c\
-*/
-/^\*-$/c\
-/*
-#
-# '*;' introduces code which may have a single line or multiple lines;
-# it extends until the next semicolon (which is also printed).
-#
-# One-line case: (do this first; else second line address for multi-line case
-# will include random text til we happen to end a line in a proto comment with
-# a semicolon)
-/^\*;.*;$/{
-s/^\*;/*\/\
-/
-s/;$/;\
-\/*\
-/
-}
-# Multi-line case:
-/^\*;/,/.*;$/{
-s/^\*;/*\/\
-/
-s/;$/;\
-\/*\
-/
-}
diff --git a/bfd/doc/startcom-p b/bfd/doc/startcom-p
deleted file mode 100755 (executable)
index 0748fad..0000000
+++ /dev/null
@@ -1,12 +0,0 @@
-# sed script for preprocessing BFD header files
-# <start comment> activity:
-/^\/\*$/{
-N
-# Delete empty comment blocks
-/^\/\*\n\*\/ *$/d
-# Transpose <start comment><blank line>
-s/^\/\*\n *$/\
-\/*/
-# merge <start comment> on line by itself with following line
-s/^\/\*\n\(.*\)/\/* \1/
-}
diff --git a/bfd/doc/tolibbfd b/bfd/doc/tolibbfd
deleted file mode 100755 (executable)
index 3caa5eb..0000000
+++ /dev/null
@@ -1,10 +0,0 @@
-/---------------START FROM/,/---------------END FROM/d
-/\/\*:init.c\*\//r init.ip
-/\/\*:libbfd.c\*\//r libbfd.ip
-/\/\*:cache.c\*\//r cache.ip
-/\/\*:cpu-h8300.c\*\//r cpu-h8300.ip
-/\/\*:cpu-i960.c\*\//r cpu-i960.ip
-/\/\*:cpu-empty.c\*\//r cpu-empty.ip
-/\/\*:archures.c\*\//r archures.ip
-/\/\*:reloc.c\*\//r reloc.ip
-/\/\*:ctor.c\*\//r ctor.ip
diff --git a/bfd/doc/tolibcoff b/bfd/doc/tolibcoff
deleted file mode 100755 (executable)
index 548c8ba..0000000
+++ /dev/null
@@ -1 +0,0 @@
-/\/\*:coffcode.h\*\//r coffcode.p
diff --git a/bfd/doc/unPROTO b/bfd/doc/unPROTO
deleted file mode 100755 (executable)
index a6f9520..0000000
+++ /dev/null
@@ -1,18 +0,0 @@
-#
-# The PROTO macro is a subterfuge to be compatible with both ANSI and K&R 
-# declaration syntax.  It's not widely known, so for the docn just map the 
-# thing to ANSI declaration syntax.
-# 
-# First, join up defns broken across multiple lines in source---but leave
-# any linebreaks, to prettify our examples 
-:pbegn
-/PROTO(.*, *$/N
-s/\n/?/
-t pbegn
-s/?/\
-/g
-# Now actually do the PROTO interpretation.
-# A PROTO invocation looks like
-#   PROTO( resulttype, function, (arglist));
-s/[    ]*PROTO(\(.*\),[\n      ]*\(.*\),[\n    ]*\((.*)\));/\1 \2\3;/
-
diff --git a/bfd/exfilter b/bfd/exfilter
deleted file mode 100755 (executable)
index 7551607..0000000
+++ /dev/null
@@ -1,14 +0,0 @@
-# SED script for preprocessing embedded doc from source (S. Chamberlain markup)
-# Final pass; cleanup work is done here.
-#
-# Within examples, make '{' and '}' printable:
-/^@lisp$/,/^@end lisp$/s/{/@{/
-/^@lisp$/,/^@end lisp$/s/}/@}/
-/^@example$/,/^@end example$/s/{/@{/
-/^@example$/,/^@end example$/s/}/@}/
-#
-# Delete empty @findex and @subsubsection entries (resulting from *proto*
-# with no further text on same line, in middle pass)
-/^@findex $/d
-/^@subsubsection @code{}/d
-#
diff --git a/bfd/exmerge b/bfd/exmerge
deleted file mode 100755 (executable)
index dafa424..0000000
+++ /dev/null
@@ -1,4 +0,0 @@
-# SED script for preprocessing embedded doc from source (S. Chamberlain markup)
-# Locate and coalesce adjacent @example blocks
-/^@end example/N
-/^@end example\n@example$/d
diff --git a/bfd/hosts/h-m68kv.h b/bfd/hosts/h-m68kv.h
deleted file mode 100644 (file)
index e667283..0000000
+++ /dev/null
@@ -1,51 +0,0 @@
-/* $Id$ */
-
-#include <sys/types.h>
-#include <sys/file.h>
-#include <fcntl.h>
-#include <errno.h>
-#include <stdio.h>
-#include <sys/stat.h>
-#include <ctype.h>
-#include <string.h>
-#include <malloc.h>
-
-#define USG
-
-#ifdef __GNUC__
-#define alloca __builtin_alloca
-#endif
-
-
-#ifndef O_ACCMODE
-#define O_ACCMODE (O_RDONLY | O_WRONLY | O_RDWR)
-#endif
-#define SEEK_SET 0
-#define SEEK_CUR 1
-
-#include <memory.h>
-#define bcmp(b1,b2,len)         memcmp(b1,b2,len)
-#define bcopy(src,dst,len)      memcpy(dst,src,len)
-#define bzero(s,n)              memset(s,0,n)
-
-#include <string.h>
-#define index(s,c)              strchr(s,c)
-#define rindex(s,c)             strrchr(s,c)
-
-
-/* EXACT TYPES */
-typedef char int8e_type;
-typedef unsigned char uint8e_type;
-typedef short int16e_type;
-typedef unsigned short uint16e_type;
-typedef int int32e_type;
-typedef unsigned int uint32e_type;
-
-/* CORRECT SIZE OR GREATER */
-typedef char int8_type;
-typedef unsigned char uint8_type;
-typedef short int16_type;
-typedef unsigned short uint16_type;
-typedef int int32_type;
-typedef unsigned int uint32_type;
-
diff --git a/bfd/hosts/hp9000.h b/bfd/hosts/hp9000.h
deleted file mode 100644 (file)
index 9e5c4a3..0000000
+++ /dev/null
@@ -1,70 +0,0 @@
-#include <fcntl.h>
-#include <errno.h>
-#include <stdio.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <ctype.h>
-#include <string.h>
-#include <sys/file.h>
-#ifndef O_ACCMODE
-#define O_ACCMODE (O_RDONLY | O_WRONLY | O_RDWR)
-#endif
-#define SEEK_SET 0
-#define SEEK_CUR 1
-
-void free();
-
-/* Some things that need to be defined in order to make code written for
-   BSD Unix compile under System V Unix.  */
-
-#include <memory.h>
-#define bcmp(b1,b2,len)                memcmp(b1,b2,len)
-#define bcopy(src,dst,len)     memcpy(dst,src,len)
-#define bzero(s,n)             memset(s,0,n)
-
-#if 0
-static int
-rename(from, to)
-{
-  unlink(to);
-  return(link(from, to));
-}
-#endif
-
-/*
- * Might not need these. Leave them out for now.
- *
-#include <string.h>
-#define index(s,c)             strchr(s,c)
-#define rindex(s,c)            strrchr(s,c)
-
-#ifdef SEEK_SET
-#      ifndef L_SET
-#              define L_SET SEEK_SET
-#      endif
-# endif
-
-#ifdef SEEK_CUR
-#      ifndef L_INCR
-#              define L_INCR SEEK_CUR
-#      endif
-# endif
- */
-
-/* EXACT TYPES */
-typedef char int8e_type;
-typedef unsigned char uint8e_type;
-typedef short int16e_type;
-typedef unsigned short uint16e_type;
-typedef int int32e_type;
-typedef unsigned int uint32e_type;
-
-/* CORRECT SIZE OR GREATER */
-typedef char int8_type;
-typedef unsigned char uint8_type;
-typedef short int16_type;
-typedef unsigned short uint16_type;
-typedef int int32_type;
-typedef unsigned int uint32_type;
-
-#include "fopen-same.h"
diff --git a/bfd/howto.c b/bfd/howto.c
deleted file mode 100755 (executable)
index 0be2261..0000000
+++ /dev/null
@@ -1,85 +0,0 @@
-/* bfd howto manager.
-   Copyright (C) 1990-1991 Free Software Foundation, Inc.
-   Written by Steve Chamberlain of Cygnus Support.
-
-This file is part of BFD, the Binary File Descriptor library.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-/* The howto manager 
-
-
-When an application wants to create a relocation, but doesn't know
-what the target machine might call it, it can find out by using this
-bit of code.
-
-*/
-
-#include <sysdep.h>
-#include <bfd.h>
-#include "libbfd.h"
-/*proto* bfd_reloc_code_enum_type
-
-*+++
-
-$typedef enum 
-${
-
-16 bits wide, simple reloc 
-
-$  BFD_RELOC_16,       
-
-8 bits wide, but used to form an address like 0xffnn
-
-$  BFD_RELOC_8_FFnn,
-
-8 bits wide, simple
-
-$  BFD_RELOC_8,
-
-8 bits wide, pc relative
-
-$  BFD_RELOC_8_PCREL
-$ } bfd_reloc_code_enum_real_type;
-
-*---
-
-*/
-
-
-
-/*proto* bfd_reloc_type_lookup
-This routine returns a pointer to a howto struct which when invoked,
-will perform the supplied relocation on data from the architecture
-noted.
-
-[Note] This function will go away.
-
-*; PROTO(struct reloc_howto_struct *,
-       bfd_reloc_type_lookup,
-       (enum bfd_architecture arch, bfd_reloc_code_enum_type code));
-*/
-
-
-struct reloc_howto_struct *
-DEFUN(bfd_reloc_type_lookup,(arch, code),
-       enum bfd_architecture arch AND
-       bfd_reloc_code_enum_type code)
-{
-  return arch_functions(arch,0)->reloc_type_lookup(code);
-}
-
-
-
diff --git a/bfd/intobfd b/bfd/intobfd
deleted file mode 100755 (executable)
index b256f4b..0000000
+++ /dev/null
@@ -1,11 +0,0 @@
-/\/\*:archive.c\*\//r archive.p
-/\/\*:archures.c\*\//r archures.p
-/\/\*:bfd.c\*\//r bfd.p
-/\/\*:core.c\*\//r core.p
-/\/\*:format.c\*\//r format.p
-/\/\*:libbfd.c\*\//r libbfd.p
-/\/\*:opncls.c\*\//r opncls.p
-/\/\*:reloc.c\*\//r reloc.p
-/\/\*:section.c\*\//r section.p
-/\/\*:syms.c\*\//r syms.p
-/\/\*:targets.c\*\//r targets.p
diff --git a/bfd/makefile.dos b/bfd/makefile.dos
deleted file mode 100644 (file)
index 60b213b..0000000
+++ /dev/null
@@ -1,334 +0,0 @@
-#    Makefile template for Configure for the BFD library.
-#    Copyright (C) 1990, 1991 Free Software Foundation, Inc.
-#    Written by Cygnus Support.
-# 
-# This file is part of BFD, the Binary File Descriptor library.
-# 
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-# 
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-# 
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-# $Id$
-
-HDEPFILES=
-TDEPFILES=
-HDEFINES=-D__MSDOS__
-TDEFINES=
-CSWITCHES=
-
-srcdir = .
-ddestdir = /usr/local
-libdir = $(ddestdir)/lib
-docdir = $(srcdir)$(subdir)/doc
-includedir= $(ddestdir)/include
-RANLIB = ar rvs
-AR = ar
-AR_FLAGS = clq
-INCDIR = $(srcdir)/../include
-CSEARCH = -I. -I$(srcdir) -I$(INCDIR)
-DEP = mkdep
-MINUS_G=-O
-
-SUBDIRS = doc
-
-#### host and target dependent Makefile fragments come in here.
-# Target: Hitachi H8/300 using IEEE-695 object file format
-# Avoid dragging in a lot of other architectures and formats.
-TDEFAULTS=-DSELECT_ARCHITECTURES=bfd_h8300_arch -DSELECT_VECS=&ieee_vec\,&srec_vec\,&h8300coff_vec
-
-
-# Change this (to MINIMIZE=1) to save space in executables.
-# Currently, all this does is control the target_vector in targets.c.
-MINIMIZE=0
-
-TARGETLIB = libbfd.a
-CFLAGS = $(MINUS_G) $(HDEFINES) $(TDEFINES) $(CSEARCH) $(CSWITCHES) # -DINTEL960VERSION
-
-
-BFD_LIBS = libbfd.o opncls.o bfd.o archive.o targets.o cache.o \
-       archures.o core.o section.o format.o syms.o reloc.o init.o ctor.o
-
-BFD_MACHINES = cpu-h8300.o cpu-i960.o cpu-sparc.o cpu-m68k.o cpu-m88k.o \
-       cpu-vax.o cpu-mips.o cpu-a29k.o cpu-i386.o cpu-rs6000.o
-
-BFD_BACKENDS = oasys.o ieee.o srec.o elf.o stab-syms.o\
-       aout64.o aout32.o demo64.o sunos.o newsos3.o i386aout.o bout.o \
-       coff-i960.o coff-a29k.o coff-m68k.o coff-i386.o coff-m88k.o \
-       coff-mips.o coff-rs6000.o coff-h8300.o
-
-OPTIONAL_BACKENDS = trad-core.o
-
-BFD_H=$(INCDIR)/bfd.h
-
-# C source files that correspond to .o's.
-CFILES = libbfd.c opncls.c bfd.c archive.c targets.c cache.c archures.c \
-        coff-i386.c aout64.c aout32.c sunos.c demo64.c coff-i960.c srec.c \
-        oasys.c ieee.c coff-m68k.c coff-a29k.c coff-rs6000.c \
-        format.c section.c core.c syms.c stabs-syms.c reloc.c init.c ctor.c \
-        coff-m88k.c coff-mips.c trad-core.c newsos3.c i386aout.c bout.c elf.c \
-       cpu-h8300.c cpu-i960.c cpu-sparc.c cpu-m68k.c cpu-m88k.c \
-       cpu-vax.c cpu-mips.c cpu-a29k.c cpu-i386.c cpu-rs6000.c coff-h8300.c
-
-STAGESTUFF = $(TARGETLIB) $(OFILES)
-
-all: $(TARGETLIB) 
-#      $(MAKE) subdir_do DO=all "DODIRS=$(SUBDIRS)"
-
-all-info: force
-       $(MAKE) subdir_do DO=all-info "DODIRS=$(SUBDIRS)"
-
-install-info: force
-       $(MAKE) subdir_do DO=install-info "DODIRS=$(SUBDIRS)"
-
-# HDEPFILES comes from the host config; TDEPFILES from the target config.
-OFILES = $(BFD_LIBS) $(BFD_BACKENDS) $(BFD_MACHINES) $(HDEPFILES) $(TDEPFILES)
-
-$(TARGETLIB): $(OFILES)
-       -rm -f $(TARGETLIB)
-       >target.rf $(AR_FLAGS) $(TARGETLIB) $(OFILES)
-       $(AR) @target.rf
-       $(RANLIB) $(TARGETLIB)
-
-# When compiling targets.c, supply the default target info from configure.
-targets.o: targets.c
-       >targets.rf $(CFLAGS) -c -DMINIMIZE=$(MINIMIZE) $(TDEFAULTS) targets.c
-       $(CC) @targets.rf
-
-subdir_do: force
-       for i in $(DODIRS); do \
-               if [ -d $(unsubdir)/$$i ] ; then \
-                       if (cd $(unsubdir)/$$i$(subdir); \
-                               $(MAKE) \
-                                       "against=$(against)" \
-                                       "AR=$(AR)" \
-                                       "CC=$(CC)" \
-                                       "AR_FLAGS=$(AR_FLAGS)" \
-                                       "RANLIB=$(RANLIB)" \
-                                       "BISON=$(BISON)" $(DO)) ; then true ; \
-                       else exit 1 ; fi ; \
-               else true ; fi ; \
-       done
-
-stage1: force
-       - mkdir stage1
-       - mv -f $(STAGESTUFF) stage1
-       $(MAKE) subdir_do DO=stage1 "DODIRS=$(SUBDIRS)"
-
-stage2: force
-       - mkdir stage2
-       - mv -f $(STAGESTUFF) stage2
-       $(MAKE) subdir_do DO=stage2 "DODIRS=$(SUBDIRS)"
-
-stage3: force
-       - mkdir stage3
-       - mv -f $(STAGESTUFF) stage3
-       $(MAKE) subdir_do DO=stage3 "DODIRS=$(SUBDIRS)"
-
-against=stage2
-
-comparison: force
-       for i in *.o ; do cmp $$i $(against)/$$i || exit 1 ; done
-       $(MAKE) subdir_do DO=comparison "DODIRS=$(SUBDIRS)"
-
-de-stage1: force
-       - (cd stage1 ; mv -f $(STAGESTUFF) ..)
-       - rmdir stage1
-       $(MAKE) subdir_do DO=de-stage1 "DODIRS=$(SUBDIRS)"
-
-de-stage2: force
-       - (cd stage2 ; mv -f $(STAGESTUFF) ..)
-       - rmdir stage2
-       $(MAKE) subdir_do DO=de-stage2 "DODIRS=$(SUBDIRS)"
-
-de-stage3: force
-       - (cd stage3 ; mv -f $(STAGESTUFF) ..)
-       - rmdir stage3
-       $(MAKE) subdir_do DO=de-stage3 "DODIRS=$(SUBDIRS)"
-
-tags etags: TAGS
-
-TAGS: force
-       etags $(INCDIR)/*.h $(srcdir)/*.h $(srcdir)/*.c
-
-clean:
-       rm -f *.[oa] *~ core *.E *.p *.ip
-       $(MAKE) subdir_do DO=clean "DODIRS=$(SUBDIRS)"
-
-clobber realclean: clean
-       rm -f libbfd.a TAGS
-       $(MAKE) subdir_do DO=clobber "DODIRS=$(SUBDIRS)"
-
-# Mark everything as depending on config.status, since the timestamp on
-# sysdep.h might actually move backwards if we reconfig and relink it
-# to a different hosts/h-xxx.h file.  This will force a recompile anyway.
-RECONFIG = # config.status
-$(BFD_LIBS):  libbfd.h $(BFD_H) $(RECONFIG)
-$(BFD_MACHINES):  libbfd.h $(BFD_H) $(RECONFIG)
-$(BFD_BACKENDS):  libbfd.h $(BFD_H) $(RECONFIG)
-$(OPTIONAL_BACKENDS):  libbfd.h $(BFD_H) $(RECONFIG)
-
-# Get around a Sun Make bug in SunOS 4.1.1 with VPATH
-cpu-i386.o: cpu-i386.c
-
-saber:
-       #suppress 65 on bfd_map_over_sections 
-       #suppress 66 on bfd_map_over_sections 
-       #suppress 67 on bfd_map_over_sections 
-       #suppress 68 on bfd_map_over_sections 
-       #suppress 69 on bfd_map_over_sections 
-       #suppress 70 on bfd_map_over_sections 
-       #suppress 110 in bfd_map_over_sections 
-       #suppress 112 in bfd_map_over_sections 
-       #suppress 530 
-       #suppress 590 in swap_exec_header 
-       #suppress 590 in _bfd_dummy_core_file_matches_executable_p 
-       #suppress 590 in bfd_dont_truncate_arname
-       #suppress 590 on ignore 
-       #suppress 590 on abfd 
-       #setopt load_flags $(CFLAGS)
-       #load $(CFILES)
-
-
-#-----------------------------------------------------------------------------
-#              'STANDARD' GNU/960 TARGETS BELOW THIS POINT
-#
-# 'VERSION' file must be present and contain a string of the form "x.y"
-#-----------------------------------------------------------------------------
-
-ver960.c: FORCE
-       rm -f ver960.c
-       echo "char ${TARG}_ver[]= \"${TARG} `cat VERSION`, `date`\";" > ver960.c
-
-
-# This target should be invoked before building a new release.
-# 'VERSION' file must be present and contain a string of the form "x.y"
-#
-roll:
-       @V=`cat VERSION`                ; \
-       MAJ=`sed 's/\..*//' VERSION`    ; \
-       MIN=`sed 's/.*\.//' VERSION`    ; \
-       V=$$MAJ.`expr $$MIN 1`  ; \
-       rm -f VERSION                   ; \
-       echo $$V >VERSION               ; \
-       echo Version $$V
-
-# Dummy target to force execution of dependent targets.
-#
-force:
-
-install:
-       cp libbfd.a $(libdir)/libbfd.a.new
-       $(RANLIB) $(libdir)/libbfd.a.new
-       mv -f $(libdir)/libbfd.a.new $(libdir)/libbfd.a
-       cp $(INCDIR)/bfd.h $(includedir)/bfd.h
-       $(MAKE) subdir_do DO=install "DODIRS=$(SUBDIRS)"
-
-# Target to uncomment host-specific lines in this makefile.  Such lines must
-# have the following string beginning in column 1: #__<hostname>__#
-# Original Makefile is backed up as 'Makefile.old'.
-#
-# Invoke with:  make make HOST=xxx
-#
-make:
-       -@if test $(HOST)x = x ; then \
-               echo '\aSpecify "make make HOST=???"'; \
-               exit 1; \
-       fi ; \
-       grep -s "^#The next line was generated by 'make make'" Makefile; \
-       if test $$? = 0 ; then  \
-               echo "\aMakefile has already been processed with 'make make'";\
-               exit 1; \
-       fi ; \
-       mv -f Makefile Makefile.old; \
-       echo "#The next line was generated by 'make make'"       >Makefile ; \
-       echo "HOST=$(HOST)"                                     >>Makefile ; \
-       echo                                                    >>Makefile ; \
-       sed "s/^#__$(HOST)__#//" < Makefile.old                 >>Makefile
-
-Makefile: $(srcdir)/Makefile.in $(host_makefile_frag) $(target_makefile_frag)
-       $(SHELL) ./config.status
-
-dep: $(CFILES)
-       mkdep $(CFLAGS) $?
-
-
-
-headers:
-       (cd $(docdir); $(MAKE) protos)
-       # Rebuild prototypes in bfd.h
-       cp $(docdir)/bfd.h $(BFD_H)
-       cp $(docdir)/libbfd.h $(srcdir)/libbfd.h
-       cp $(docdir)/libcoff.h $(srcdir)/libcoff.h
-
-bfd.info:
-       ( cd $(docdir); $(MAKE) bfd.info)
-
-bfd.dvi:
-       (cd $(docdir); $(MAKE) bfd.dvi)
-
-bfd.ps: 
-       (cd $(docdir); $(MAKE) bfd.ps)
-
-# What appears below is generated by a hacked mkdep using gcc -MM.
-
-# DO NOT DELETE THIS LINE -- mkdep uses it.
-# DO NOT PUT ANYTHING AFTER THIS LINE, IT WILL GO AWAY.
-
-libbfd.o : libbfd.c $(INCDIR)/bfd.h $(INCDIR)/obstack.h libbfd.h 
-opncls.o : opncls.c $(INCDIR)/bfd.h $(INCDIR)/obstack.h libbfd.h 
-bfd.o : bfd.c $(INCDIR)/bfd.h $(INCDIR)/obstack.h libbfd.h 
-archive.o : archive.c $(INCDIR)/bfd.h $(INCDIR)/obstack.h libbfd.h \
-  $(INCDIR)/ar.h $(INCDIR)/ranlib.h 
-targets.o : targets.c $(INCDIR)/bfd.h $(INCDIR)/obstack.h libbfd.h 
-cache.o : cache.c $(INCDIR)/bfd.h $(INCDIR)/obstack.h libbfd.h 
-archures.o : archures.c $(INCDIR)/bfd.h $(INCDIR)/obstack.h 
-aout64.o : aout64.c 
-aout32.o : aout32.c aoutx.h $(INCDIR)/bfd.h $(INCDIR)/ansidecl.h \
-  $(INCDIR)/obstack.h libaout.h libbfd.h $(INCDIR)/aout64.h \
-  $(INCDIR)/stabgnu.h $(INCDIR)/stab.def $(INCDIR)/ar.h 
-sunos.o : sunos.c aoutf1.h $(INCDIR)/bfd.h $(INCDIR)/obstack.h \
-  libaout.h libbfd.h $(INCDIR)/aout64.h $(INCDIR)/stabgnu.h \
-  $(INCDIR)/stab.def $(INCDIR)/ar.h 
-demo64.o : demo64.c 
-
-srec.o : srec.c $(INCDIR)/bfd.h $(INCDIR)/obstack.h libbfd.h 
-oasys.o : oasys.c $(INCDIR)/bfd.h $(INCDIR)/obstack.h libbfd.h \
-  $(INCDIR)/oasys.h liboasys.h 
-ieee.o : ieee.c $(INCDIR)/bfd.h $(INCDIR)/obstack.h libbfd.h \
-  $(INCDIR)/ieee.h libieee.h 
-coff-h8300.o: coff-h8300.c  $(INCDIR)/bfd.h $(INCDIR)/obstack.h libbfd.h \
-  $(INCDIR)/coff-h8300.h $(INCDIR)/internalcoff.h libcoff.h coffcode.h 
-format.o : format.c $(INCDIR)/bfd.h \
-  $(INCDIR)/obstack.h libbfd.h 
-section.o : section.c $(INCDIR)/bfd.h \
-  $(INCDIR)/obstack.h libbfd.h 
-core.o : core.c $(INCDIR)/bfd.h \
-  $(INCDIR)/obstack.h libbfd.h 
-syms.o : syms.c $(INCDIR)/bfd.h \
-  $(INCDIR)/obstack.h libbfd.h 
-syms.o : stab-syms.c
-reloc.o : reloc.c $(INCDIR)/bfd.h \
-  $(INCDIR)/obstack.h libbfd.h 
-
-trad-core.o : trad-core.c $(INCDIR)/bfd.h $(INCDIR)/obstack.h \
-  libbfd.h libaout.h 
-newsos3.o : newsos3.c $(INCDIR)/bfd.h $(INCDIR)/obstack.h libbfd.h \
-  $(INCDIR)/aout64.h $(INCDIR)/stabgnu.h $(INCDIR)/stab.def \
-  $(INCDIR)/ar.h libaout.h 
-i386aout.o : i386aout.c $(INCDIR)/bfd.h $(INCDIR)/obstack.h libbfd.h \
-  $(INCDIR)/aout64.h $(INCDIR)/stabgnu.h $(INCDIR)/stab.def \
-  $(INCDIR)/ar.h libaout.h 
-bout.o : bout.c $(INCDIR)/bfd.h $(INCDIR)/obstack.h libbfd.h \
-  $(INCDIR)/bout.h $(INCDIR)/stabgnu.h $(INCDIR)/stab.def libaout.h 
-
-# IF YOU PUT ANYTHING HERE IT WILL GO AWAY
diff --git a/bfd/mergecom-p b/bfd/mergecom-p
deleted file mode 100755 (executable)
index 456478b..0000000
+++ /dev/null
@@ -1,5 +0,0 @@
-# SED script for preprocessing embedded headers from C source comments 
-# Locate and coalesce adjacent comments
-/\*\/$/N
-s/\*\/\n\/\*/\
-/
diff --git a/bfd/misc.c b/bfd/misc.c
deleted file mode 100755 (executable)
index 041fcde..0000000
+++ /dev/null
@@ -1,98 +0,0 @@
-/* Copyright (C) 1990, 1991 Free Software Foundation, Inc.
-
-This file is part of BFD, the Binary File Diddler.
-
-BFD is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 1, or (at your option)
-any later version.
-
-BFD is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with BFD; see the file COPYING.  If not, write to
-the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-/* $Id$ */
-
-#if 0
- /* xoxorich.  coelesced from other binutils. */
-/* This crap should all be bundled with the binutils, or else be in its
-   own library, but for expediency we are doing it this way right now. */
-
-/*
- * Last Mod Mon Feb 18 14:49:39 PST 1991, by rich@cygint.cygnus.com
- */
-
-#include <stdio.h>
-#include "misc.h"
-#if __STDC__
-extern char *realloc (char * ptr, int size);
-extern char *malloc (int size);
-#else
-extern char *realloc ();
-extern char *malloc ();
-#endif
-
-/* Print the filename of the current file on 'outfile' (a stdio stream).  */
-
-/* Current file's name */
-
-char *input_name;
-
-/* Current member's name, or 0 if processing a non-library file.  */
-
-char *input_member;
-
-void print_file_name (outfile)
-     FILE *outfile;
-{
-  fprintf (outfile, "%s", input_name);
-  if (input_member)
-    fprintf (outfile, "(%s)", input_member);
-}
-\f
-/* process one input file */
-void scan_library ();
-
-char *program_name;
-
-/* Report a nonfatal error.
-   STRING is a format for printf, and ARG1 ... ARG3 are args for it.  */
-/*VARARGS*/
-void
-error (string, arg1, arg2, arg3)
-     char *string, *arg1, *arg2, *arg3;
-{
-  fprintf (stderr, "%s: ", program_name);
-  fprintf (stderr, string, arg1, arg2, arg3);
-  fprintf (stderr, "\n");
-}
-
-
-
-/* Report a nonfatal error.
-   STRING is printed, followed by the current file name.  */
-
-void
-error_with_file (string)
-     char *string;
-{
-  fprintf (stderr, "%s: ", program_name);
-  print_file_name (stderr);
-  fprintf (stderr, ": ");
-  fprintf (stderr, string);
-  fprintf (stderr, "\n");
-}
-
-/* Like malloc but get fatal error if memory is exhausted.  */
-
-
-/* Like realloc but get fatal error if memory is exhausted.  */
-
-
-/* end of misc.c */
-#endif
diff --git a/bfd/misc.h b/bfd/misc.h
deleted file mode 100755 (executable)
index 05935c2..0000000
+++ /dev/null
@@ -1,93 +0,0 @@
-/* Copyright (C) 1990, 1991 Free Software Foundation, Inc.
-
-This file is part of BFD, the Binary File Diddler.
-
-BFD is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 1, or (at your option)
-any later version.
-
-BFD is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with BFD; see the file COPYING.  If not, write to
-the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-/* $Id$ */
-
-/* xoxorich. coelesced from binutils.
- *
- * Last Mod Mon Feb 18 14:49:51 PST 1991, by rich@cygint.cygnus.com
- */
-
-#ifndef MISC_H
-#define MISC_H 1
-
-#include "ranlib.h"
-
-#ifdef USG
-#include <string.h>
-#else
-#include <strings.h>
-#endif /* USG */
-
-#ifdef never
-#ifdef LOCKS
-#undef LOCKS
-#endif /* LOCKS */
-#endif /* never */
-
- /* used for masking system io calls into stdio. */
-
-/* the name, ie, argv[0], of this program. */
-
-extern char *program_name;
-
-/* Current file's name */
-
-extern char *input_name;
-
-/* Current member's name, or 0 if processing a non-library file.  */
-
-extern char *input_member;
-
-/* Report an error using the message for the last failed system call,
-   followed by the string NAME.  */
-
-#define perror_name(name)      perror(concat(program_name, ": error on ", name))
-#define pfatal_with_name(name) {perror_name(name);exit(-1);}
-
-#ifdef __STDC__
-
-extern char *concat(char *a, char *b, char *c);
-extern void *xmalloc(unsigned int size);
-extern void * xrealloc(char *ptr, int size);
-extern void error(char *string, char *arg1, char *arg2, char *arg3);
-extern void error_with_file(char *string);
-extern void fatal(char *string, char*a1, char*a2, char*a3);
-extern void print_file_name(FILE *outfile);
-extern void swap_symdef_table(struct symdef *sym, int count);
-#else
-extern char *alloca();
-extern char *concat();
-extern void * xmalloc();
-extern void *xrealloc();
-extern void error();
-extern void error_with_file();
-extern void fatal();
-extern void print_file_name();
-extern void swap_symdef_table();
-#endif /* __STDC__ */
-
-#endif /* MISC_H */
-
-/*
- * Local Variables:
- * comment-column: 0
- * End:
- */
-
-/* end of misc.h */
diff --git a/bfd/movecom-p b/bfd/movecom-p
deleted file mode 100755 (executable)
index 7ed04c7..0000000
+++ /dev/null
@@ -1,8 +0,0 @@
-# sed script for BFD header files:
-# Transpose <blank line> <end comment>
-/^$/,/^ *[^ ]*.*$/{
-/^$/N
-/^ *\n\*\/$/c\
-*\/\
-
-}
diff --git a/bfd/obstack.c b/bfd/obstack.c
deleted file mode 100755 (executable)
index bbed70b..0000000
+++ /dev/null
@@ -1,330 +0,0 @@
-/* obstack.c - subroutines used implicitly by object stack macros
-   Copyright (C) 1988 Free Software Foundation, Inc.
-
-This program is free software; you can redistribute it and/or modify it
-under the terms of the GNU General Public License as published by the
-Free Software Foundation; either version 1, or (at your option) any
-later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */
-#include <ansidecl.h>
-#include <sysdep.h>
-#include "obstack.h"
-
-
-/* Determine default alignment.  */
-struct fooalign {char x; double d;};
-#define DEFAULT_ALIGNMENT ((char *)&((struct fooalign *) 0)->d - (char *)0)
-/* If malloc were really smart, it would round addresses to DEFAULT_ALIGNMENT.
-   But in fact it might be less smart and round addresses to as much as
-   DEFAULT_ROUNDING.  So we prepare for it to do that.  */
-union fooround {long x; double d;};
-#define DEFAULT_ROUNDING (sizeof (union fooround))
-
-/* When we copy a long block of data, this is the unit to do it with.
-   On some machines, copying successive ints does not work;
-   in such a case, redefine COPYING_UNIT to `long' (if that works)
-   or `char' as a last resort.  */
-#ifndef COPYING_UNIT
-#define COPYING_UNIT int
-#endif
-
-/* The non-GNU-C macros copy the obstack into this global variable
-   to avoid multiple evaluation.  */
-
-struct obstack *_obstack;
-\f
-/* Initialize an obstack H for use.  Specify chunk size SIZE (0 means default).
-   Objects start on multiples of ALIGNMENT (0 means use default).
-   CHUNKFUN is the function to use to allocate chunks,
-   and FREEFUN the function to free them.  */
-
-void DEFUN(_obstack_begin,(h, size, alignment, chunkfun, freefun),
-          struct obstack *h AND
-          int size AND
-          int alignment AND
-          PTR (*chunkfun) () AND
-          void (*freefun) ())
-{
-  register struct _obstack_chunk* chunk; /* points to new chunk */
-
-  if (alignment == 0)
-    alignment = DEFAULT_ALIGNMENT;
-  if (size == 0)
-    /* Default size is what GNU malloc can fit in a 4096-byte block.  */
-    {
-      /* 12 is sizeof (mhead) and 4 is EXTRA from GNU malloc.
-        Use the values for range checking, because if range checking is off,
-        the extra bytes won't be missed terribly, but if range checking is on
-        and we used a larger request, a whole extra 4096 bytes would be
-        allocated.
-
-        These number are irrelevant to the new GNU malloc.  I suspect it is
-        less sensitive to the size of the request.  */
-      int extra = ((((12 + DEFAULT_ROUNDING - 1) & ~(DEFAULT_ROUNDING - 1))
-                   + 4 + DEFAULT_ROUNDING - 1)
-                  & ~(DEFAULT_ROUNDING - 1));
-      size = 4096 - extra;
-    }
-
-  h->chunkfun = chunkfun;
-  h->freefun = freefun;
-  h->chunk_size = size;
-  h->alignment_mask = alignment - 1;
-
-  chunk        = h->chunk = (struct _obstack_chunk *)(*h->chunkfun) (h->chunk_size);
-  h->next_free = h->object_base = chunk->contents;
-  h->chunk_limit = chunk->limit
-   = (char *) chunk + h->chunk_size;
-  chunk->prev = 0;
-}
-
-/* Allocate a new current chunk for the obstack *H
-   on the assumption that LENGTH bytes need to be added
-   to the current object, or a new object of length LENGTH allocated.
-   Copies any partial object from the end of the old chunk
-   to the beginning of the new one.  
-
-   The function must be "int" so it can be used in non-ANSI C
-   compilers in a : expression.  */
-
-int
-DEFUN(_obstack_newchunk,(h, length),
-      struct obstack *h AND
-      int length)
-{
-  register struct _obstack_chunk*      old_chunk = h->chunk;
-  register struct _obstack_chunk*      new_chunk;
-  register long        new_size;
-  register int obj_size = h->next_free - h->object_base;
-  register int i;
-  int already;
-
-  /* Compute size for new chunk.  */
-  new_size = (obj_size + length) + (obj_size >> 3) + 100;
-  if (new_size < h->chunk_size)
-    new_size = h->chunk_size;
-
-  /* Allocate and initialize the new chunk.  */
-  new_chunk = h->chunk = (struct _obstack_chunk *)(*h->chunkfun) (new_size);
-  new_chunk->prev = old_chunk;
-  new_chunk->limit = h->chunk_limit = (char *) new_chunk + new_size;
-
-  /* Move the existing object to the new chunk.
-     Word at a time is fast and is safe if the object
-     is sufficiently aligned.  */
-  if (h->alignment_mask + 1 >= DEFAULT_ALIGNMENT)
-    {
-      for (i = obj_size / sizeof (COPYING_UNIT) - 1;
-          i >= 0; i--)
-       ((COPYING_UNIT *)new_chunk->contents)[i]
-         = ((COPYING_UNIT *)h->object_base)[i];
-      /* We used to copy the odd few remaining bytes as one extra COPYING_UNIT,
-        but that can cross a page boundary on a machine
-        which does not do strict alignment for COPYING_UNITS.  */
-      already = obj_size / sizeof (COPYING_UNIT) * sizeof (COPYING_UNIT);
-    }
-  else
-    already = 0;
-  /* Copy remaining bytes one by one.  */
-  for (i = already; i < obj_size; i++)
-    new_chunk->contents[i] = h->object_base[i];
-
-  h->object_base = new_chunk->contents;
-  h->next_free = h->object_base + obj_size;
-return 0;
-}
-
-/* Return nonzero if object OBJ has been allocated from obstack H.
-   This is here for debugging.
-   If you use it in a program, you are probably losing.  */
-
-int
-DEFUN(_obstack_allocated_p, (h, obj), 
-      struct obstack *h AND
-      PTR obj)
-{
-  register struct _obstack_chunk*  lp; /* below addr of any objects in this chunk */
-  register struct _obstack_chunk*  plp;        /* point to previous chunk if any */
-
-  lp = (h)->chunk;
-  while (lp != 0 && ((PTR)lp > obj || (PTR)(lp)->limit < obj))
-      {
-       plp = lp -> prev;
-       lp = plp;
-      }
-  return lp != 0;
-}
-
-/* Free objects in obstack H, including OBJ and everything allocate
-   more recently than OBJ.  If OBJ is zero, free everything in H.  */
-
-#ifdef __STDC__
-#undef obstack_free
-void
-obstack_free (struct obstack *h, PTR obj)
-#else
-int
-_obstack_free (h, obj)
-     struct obstack *h;
-     PTR obj;
-#endif
-{
-  register struct _obstack_chunk*  lp; /* below addr of any objects in this chunk */
-  register struct _obstack_chunk*  plp;        /* point to previous chunk if any */
-
-  lp = (h)->chunk;
-  /* We use >= because there cannot be an object at the beginning of a chunk.
-     But there can be an empty object at that address
-     at the end of another chunk.  */
-  while (lp != 0 && ((PTR)lp >= obj || (PTR)(lp)->limit < obj))
-    {
-      plp = lp -> prev;
-      (*h->freefun) ((PTR) lp);
-      lp = plp;
-    }
-  if (lp)
-    {
-      (h)->object_base = (h)->next_free = (char *)(obj);
-      (h)->chunk_limit = lp->limit;
-      (h)->chunk = lp;
-    }
-  else if (obj != 0)
-    /* obj is not in any of the chunks! */
-    abort ();
-}
-
-/* Let same .o link with output of gcc and other compilers.  */
-
-#ifdef __STDC__
-int
-_obstack_free (h, obj)
-     struct obstack *h;
-     PTR obj;
-{
-  obstack_free (h, obj);
-  return 0;
-}
-#endif
-\f
-/* #if 0 */
-/* These are now turned off because the applications do not use it
-   and it uses bcopy via obstack_grow, which causes trouble on sysV.  */
-
-/* Now define the functional versions of the obstack macros.
-   Define them to simply use the corresponding macros to do the job.  */
-
-#ifdef __STDC__
-/* These function definitions do not work with non-ANSI preprocessors;
-   they won't pass through the macro names in parentheses.  */
-
-/* The function names appear in parentheses in order to prevent
-   the macro-definitions of the names from being expanded there.  */
-
-PTR (obstack_base) (obstack)
-     struct obstack *obstack;
-{
-  return obstack_base (obstack);
-}
-
-PTR (obstack_next_free) (obstack)
-     struct obstack *obstack;
-{
-  return obstack_next_free (obstack);
-}
-
-int (obstack_object_size) (obstack)
-     struct obstack *obstack;
-{
-  return obstack_object_size (obstack);
-}
-
-int (obstack_room) (obstack)
-     struct obstack *obstack;
-{
-  return obstack_room (obstack);
-}
-
-void (obstack_grow) (obstack, ptr, length)
-     struct obstack *obstack;
-     PTR ptr;
-     int length;
-{
-(void)  obstack_grow (obstack, ptr, length);
-}
-
-void (obstack_grow0) (obstack, ptr, length)
-     struct obstack *obstack;
-     PTR ptr;
-     int length;
-{
-(void)  obstack_grow0 (obstack, ptr, length);
-}
-
-void (obstack_1grow) (obstack, character)
-     struct obstack *obstack;
-     int character;
-{
-(void)  obstack_1grow (obstack, character);
-}
-
-void (obstack_blank) (obstack, length)
-     struct obstack *obstack;
-     int length;
-{
-(void)  obstack_blank (obstack, length);
-}
-
-void (obstack_1grow_fast) (obstack, character)
-     struct obstack *obstack;
-     int character;
-{
-  obstack_1grow_fast (obstack, character);
-}
-
-void (obstack_blank_fast) (obstack, length)
-     struct obstack *obstack;
-     int length;
-{
-  obstack_blank_fast (obstack, length);
-}
-
-PTR (obstack_finish) (obstack)
-     struct obstack *obstack;
-{
-  return obstack_finish (obstack);
-}
-
-PTR (obstack_alloc) (obstack, length)
-     struct obstack *obstack;
-     int length;
-{
-  return obstack_alloc (obstack, length);
-}
-
-PTR (obstack_copy) (obstack, ptr, length)
-     struct obstack *obstack;
-     PTR ptr;
-     int length;
-{
-  return obstack_copy (obstack, ptr, length);
-}
-
-PTR (obstack_copy0) (obstack, ptr, length)
-     struct obstack *obstack;
-     PTR ptr;
-     int length;
-{
-  return obstack_copy0 (obstack, ptr, length);
-}
-
-#endif /* __STDC__ */
-
-
diff --git a/bfd/obstack.h b/bfd/obstack.h
deleted file mode 100755 (executable)
index a4898ec..0000000
+++ /dev/null
@@ -1,413 +0,0 @@
-/* obstack.h - object stack macros
-   Copyright (C) 1988 Free Software Foundation, Inc.
-
-This program is free software; you can redistribute it and/or modify it
-under the terms of the GNU General Public License as published by the
-Free Software Foundation; either version 1, or (at your option) any
-later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-/* Summary:
-
-All the apparent functions defined here are macros. The idea
-is that you would use these pre-tested macros to solve a
-very specific set of problems, and they would run fast.
-Caution: no side-effects in arguments please!! They may be
-evaluated MANY times!!
-
-These macros operate a stack of objects.  Each object starts life
-small, and may grow to maturity.  (Consider building a word syllable
-by syllable.)  An object can move while it is growing.  Once it has
-been "finished" it never changes address again.  So the "top of the
-stack" is typically an immature growing object, while the rest of the
-stack is of mature, fixed size and fixed address objects.
-
-These routines grab large chunks of memory, using a function you
-supply, called `obstack_chunk_alloc'.  On occasion, they free chunks,
-by calling `obstack_chunk_free'.  You must define them and declare
-them before using any obstack macros.
-
-Each independent stack is represented by a `struct obstack'.
-Each of the obstack macros expects a pointer to such a structure
-as the first argument.
-
-One motivation for this package is the problem of growing char strings
-in symbol tables.  Unless you are "fascist pig with a read-only mind"
-[Gosper's immortal quote from HAKMEM item 154, out of context] you
-would not like to put any arbitrary upper limit on the length of your
-symbols.
-
-In practice this often means you will build many short symbols and a
-few long symbols.  At the time you are reading a symbol you don't know
-how long it is.  One traditional method is to read a symbol into a
-buffer, realloc()ating the buffer every time you try to read a symbol
-that is longer than the buffer.  This is beaut, but you still will
-want to copy the symbol from the buffer to a more permanent
-symbol-table entry say about half the time.
-
-With obstacks, you can work differently.  Use one obstack for all symbol
-names.  As you read a symbol, grow the name in the obstack gradually.
-When the name is complete, finalize it.  Then, if the symbol exists already,
-free the newly read name.
-
-The way we do this is to take a large chunk, allocating memory from
-low addresses.  When you want to build a symbol in the chunk you just
-add chars above the current "high water mark" in the chunk.  When you
-have finished adding chars, because you got to the end of the symbol,
-you know how long the chars are, and you can create a new object.
-Mostly the chars will not burst over the highest address of the chunk,
-because you would typically expect a chunk to be (say) 100 times as
-long as an average object.
-
-In case that isn't clear, when we have enough chars to make up
-the object, THEY ARE ALREADY CONTIGUOUS IN THE CHUNK (guaranteed)
-so we just point to it where it lies.  No moving of chars is
-needed and this is the second win: potentially long strings need
-never be explicitly shuffled. Once an object is formed, it does not
-change its address during its lifetime.
-
-When the chars burst over a chunk boundary, we allocate a larger
-chunk, and then copy the partly formed object from the end of the old
-chunk to the beginning of the new larger chunk.  We then carry on
-accreting characters to the end of the object as we normally would.
-
-A special macro is provided to add a single char at a time to a
-growing object.  This allows the use of register variables, which
-break the ordinary 'growth' macro.
-
-Summary:
-       We allocate large chunks.
-       We carve out one object at a time from the current chunk.
-       Once carved, an object never moves.
-       We are free to append data of any size to the currently
-         growing object.
-       Exactly one object is growing in an obstack at any one time.
-       You can run one obstack per control block.
-       You may have as many control blocks as you dare.
-       Because of the way we do it, you can `unwind' a obstack
-         back to a previous state. (You may remove objects much
-         as you would with a stack.)
-*/
-
-
-/* Don't do the contents of this file more than once.  */
-
-#ifndef __OBSTACKS__
-#define __OBSTACKS__
-\f
-/* We use subtraction of (char *)0 instead of casting to int
-   because on word-addressable machines a simple cast to int
-   may ignore the byte-within-word field of the pointer.  */
-
-#ifndef __PTR_TO_INT
-#define __PTR_TO_INT(P) ((P) - (char*)0)
-#endif
-
-#ifndef __INT_TO_PTR
-#define __INT_TO_PTR(P) ((P) + (char*)0)
-#endif
-
-struct _obstack_chunk          /* Lives at front of each chunk. */
-{
-  char  *limit;                        /* 1 past end of this chunk */
-  struct _obstack_chunk *prev; /* address of prior chunk or NULL */
-  char contents[4];            /* objects begin here */
-};
-
-struct obstack         /* control current object in current chunk */
-{
-  long chunk_size;             /* preferred size to allocate chunks in */
-  struct _obstack_chunk* chunk;        /* address of current struct obstack_chunk */
-  char *object_base;           /* address of object we are building */
-  char *next_free;             /* where to add next char to current object */
-  char *chunk_limit;           /* address of char after current chunk */
-  int  temp;                   /* Temporary for some macros.  */
-  int   alignment_mask;                /* Mask of alignment for each object. */
-
-  PTR(*chunkfun) ();   /* User's fcn to allocate a chunk.  */
-  void (*freefun) ();          /* User's function to free a chunk.  */
-};
-\f
-#ifdef __STDC__
-
-/* Do the function-declarations after the structs
-   but before defining the macros.  */
-
-void obstack_init (struct obstack *obstack);
-
-void * obstack_alloc (struct obstack *obstack, int size);
-
-void * obstack_copy (struct obstack *obstack, void *address, int size);
-void * obstack_copy0 (struct obstack *obstack, void *address, int size);
-
-void obstack_free (struct obstack *obstack, void *block);
-
-void obstack_blank (struct obstack *obstack, int size);
-
-void obstack_grow (struct obstack *obstack, void *data, int size);
-void obstack_grow0 (struct obstack *obstack, void *data, int size);
-
-void obstack_1grow (struct obstack *obstack, int data_char);
-void obstack_ptr_grow (struct obstack *obstack, void *data);
-void obstack_int_grow (struct obstack *obstack, int data);
-
-void * obstack_finish (struct obstack *obstack);
-
-int obstack_object_size (struct obstack *obstack);
-
-int obstack_room (struct obstack *obstack);
-void obstack_1grow_fast (struct obstack *obstack, int data_char);
-void obstack_ptr_grow_fast (struct obstack *obstack, void *data);
-void obstack_int_grow_fast (struct obstack *obstack, int data);
-void obstack_blank_fast (struct obstack *obstack, int size);
-
-void * obstack_base (struct obstack *obstack);
-void * obstack_next_free (struct obstack *obstack);
-int obstack_alignment_mask (struct obstack *obstack);
-int obstack_chunk_size (struct obstack *obstack);
-
-#endif /* __STDC__ */
-
-/* Non-ANSI C cannot really support alternative functions for these macros,
-   so we do not declare them.  */
-\f
-/* Pointer to beginning of object being allocated or to be allocated next.
-   Note that this might not be the final address of the object
-   because a new chunk might be needed to hold the final size.  */
-
-#define obstack_base(h) ((h)->object_base)
-
-/* Size for allocating ordinary chunks.  */
-
-#define obstack_chunk_size(h) ((h)->chunk_size)
-
-/* Pointer to next byte not yet allocated in current chunk.  */
-
-#define obstack_next_free(h)   ((h)->next_free)
-
-/* Mask specifying low bits that should be clear in address of an object.  */
-
-#define obstack_alignment_mask(h) ((h)->alignment_mask)
-
-#define obstack_init(h) \
-  _obstack_begin ((h), 0, 0, obstack_chunk_alloc, obstack_chunk_free)
-
-#define obstack_begin(h, size) \
-  _obstack_begin ((h), (size), 0, obstack_chunk_alloc, obstack_chunk_free)
-
-#define obstack_1grow_fast(h,achar) (*((h)->next_free)++ = achar)
-
-#define obstack_blank_fast(h,n) ((h)->next_free += (n))
-\f
-#if defined (__GNUC__) && defined (__STDC__)
-
-/* For GNU C, if not -traditional,
-   we can define these macros to compute all args only once
-   without using a global variable.
-   Also, we can avoid using the `temp' slot, to make faster code.  */
-
-#define obstack_object_size(OBSTACK)                                   \
-  ({ struct obstack *__o = (OBSTACK);                                  \
-     (unsigned) (__o->next_free - __o->object_base); })
-
-#define obstack_room(OBSTACK)                                          \
-  ({ struct obstack *__o = (OBSTACK);                                  \
-     (unsigned) (__o->chunk_limit - __o->next_free); })
-
-#define obstack_grow(OBSTACK,where,length)                             \
-({ struct obstack *__o = (OBSTACK);                                    \
-   int __len = (length);                                               \
-   ((__o->next_free + __len > __o->chunk_limit)                                \
-    ? _obstack_newchunk (__o, __len) : 0);                             \
-   bcopy (where, __o->next_free, __len);                               \
-   __o->next_free += __len;                                            \
-   (void) 0; })
-
-#define obstack_grow0(OBSTACK,where,length)                            \
-({ struct obstack *__o = (OBSTACK);                                    \
-   int __len = (length);                                               \
-   ((__o->next_free + __len + 1 > __o->chunk_limit)                    \
-    ? _obstack_newchunk (__o, __len + 1) : 0),                         \
-   bcopy (where, __o->next_free, __len),                               \
-   __o->next_free += __len,                                            \
-   *(__o->next_free)++ = 0;                                            \
-   (void) 0; })
-
-#define obstack_1grow(OBSTACK,datum)                                   \
-({ struct obstack *__o = (OBSTACK);                                    \
-   ((__o->next_free + 1 > __o->chunk_limit)                            \
-    ? _obstack_newchunk (__o, 1) : 0),                                 \
-   *(__o->next_free)++ = (datum);                                      \
-   (void) 0; })
-
-/* These assume that the obstack alignment is good enough for pointers or ints,
-   and that the data added so far to the current object
-   shares that much alignment.  */
-   
-#define obstack_ptr_grow(OBSTACK,datum)                                        \
-({ struct obstack *__o = (OBSTACK);                                    \
-   ((__o->next_free + sizeof (void *) > __o->chunk_limit)              \
-    ? _obstack_newchunk (__o, sizeof (void *)) : 0),                   \
-   *((void **)__o->next_free)++ = ((void *)datum);                     \
-   (void) 0; })
-
-#define obstack_int_grow(OBSTACK,datum)                                        \
-({ struct obstack *__o = (OBSTACK);                                    \
-   ((__o->next_free + sizeof (int) > __o->chunk_limit)                 \
-    ? _obstack_newchunk (__o, sizeof (int)) : 0),                      \
-   *((int *)__o->next_free)++ = ((int)datum);                          \
-   (void) 0; })
-
-#define obstack_ptr_grow_fast(h,aptr) (*((void **)(h)->next_free)++ = (void *)aptr)
-#define obstack_int_grow_fast(h,aint) (*((int *)(h)->next_free)++ = (int)aint)
-
-#define obstack_blank(OBSTACK,length)                                  \
-({ struct obstack *__o = (OBSTACK);                                    \
-   int __len = (length);                                               \
-   ((__o->chunk_limit - __o->next_free < __len)                                \
-    ? _obstack_newchunk (__o, __len) : 0);                             \
-   __o->next_free += __len;                                            \
-   (void) 0; })
-
-#define obstack_alloc(OBSTACK,length)                                  \
-({ struct obstack *__h = (OBSTACK);                                    \
-   obstack_blank (__h, (length));                                      \
-   obstack_finish (__h); })
-
-#define obstack_copy(OBSTACK,where,length)                             \
-({ struct obstack *__h = (OBSTACK);                                    \
-   obstack_grow (__h, (where), (length));                              \
-   obstack_finish (__h); })
-
-#define obstack_copy0(OBSTACK,where,length)                            \
-({ struct obstack *__h = (OBSTACK);                                    \
-   obstack_grow0 (__h, (where), (length));                             \
-   obstack_finish (__h); })
-
-#define obstack_finish(OBSTACK)                                        \
-({ struct obstack *__o = (OBSTACK);                                    \
-   void *value = (void *) __o->object_base;                            \
-   __o->next_free                                                      \
-     = __INT_TO_PTR ((__PTR_TO_INT (__o->next_free)+__o->alignment_mask)\
-                    & ~ (__o->alignment_mask));                        \
-   ((__o->next_free - (char *)__o->chunk                               \
-     > __o->chunk_limit - (char *)__o->chunk)                          \
-    ? (__o->next_free = __o->chunk_limit) : 0);                                \
-   __o->object_base = __o->next_free;                                  \
-   value; })
-
-#define obstack_free(OBSTACK, OBJ)                                     \
-({ struct obstack *__o = (OBSTACK);                                    \
-   void *__obj = (OBJ);                                                        \
-   if (__obj > (void *)__o->chunk && __obj < (void *)__o->chunk_limit)  \
-     __o->next_free = __o->object_base = __obj;                                \
-   else (obstack_free) (__o, __obj); })
-\f
-#else /* not __GNUC__ or not __STDC__ */
-
-#define obstack_object_size(h) \
- (unsigned) ((h)->next_free - (h)->object_base)
-
-#define obstack_room(h)                \
- (unsigned) ((h)->chunk_limit - (h)->next_free)
-
-#define obstack_grow(h,where,length)                                   \
-( (h)->temp = (length),                                                        \
-  (((h)->next_free + (h)->temp > (h)->chunk_limit)                     \
-   ? _obstack_newchunk ((h), (h)->temp) : 0),                          \
-  bcopy (where, (h)->next_free, (h)->temp),                            \
-  (h)->next_free += (h)->temp)
-
-#define obstack_grow0(h,where,length)                                  \
-( (h)->temp = (length),                                                        \
-  (((h)->next_free + (h)->temp + 1 > (h)->chunk_limit)                 \
-   ? _obstack_newchunk ((h), (h)->temp + 1) : 0),                      \
-  bcopy (where, (h)->next_free, (h)->temp),                            \
-  (h)->next_free += (h)->temp,                                         \
-  *((h)->next_free)++ = 0)
-
-#define obstack_1grow(h,datum)                                         \
-( (((h)->next_free + 1 > (h)->chunk_limit)                             \
-   ? _obstack_newchunk ((h), 1) : 0),                                  \
-  *((h)->next_free)++ = (datum))
-
-#define obstack_ptr_grow(h,datum)                                      \
-( (((h)->next_free + sizeof (char *) > (h)->chunk_limit)               \
-   ? _obstack_newchunk ((h), sizeof (char *)) : 0),                    \
-  *((char **)(h)->next_free)++ = ((char *)datum))
-
-#define obstack_int_grow(h,datum)                                      \
-( (((h)->next_free + sizeof (int) > (h)->chunk_limit)                  \
-   ? _obstack_newchunk ((h), sizeof (int)) : 0),                       \
-  *((int *)(h)->next_free)++ = ((int)datum))
-
-#define obstack_ptr_grow_fast(h,aptr) (*((char **)(h)->next_free)++ = (char *)aptr)
-#define obstack_int_grow_fast(h,aint) (*((int *)(h)->next_free)++ = (int)aint)
-
-#define obstack_blank(h,length)                                                \
-( (h)->temp = (length),                                                        \
-  (((h)->chunk_limit - (h)->next_free < (h)->temp)                     \
-   ? _obstack_newchunk ((h), (h)->temp) : 0),                          \
-  (h)->next_free += (h)->temp)
-
-#define obstack_alloc(h,length)                                                \
- (obstack_blank ((h), (length)), obstack_finish ((h)))
-
-#define obstack_copy(h,where,length)                                   \
- (obstack_grow ((h), (where), (length)), obstack_finish ((h)))
-
-#define obstack_copy0(h,where,length)                                  \
- (obstack_grow0 ((h), (where), (length)), obstack_finish ((h)))
-
-#define obstack_finish(h)                                              \
-( (h)->temp = __PTR_TO_INT ((h)->object_base),                         \
-  (h)->next_free                                                       \
-    = __INT_TO_PTR ((__PTR_TO_INT ((h)->next_free)+(h)->alignment_mask)        \
-                   & ~ ((h)->alignment_mask)),                         \
-  (((h)->next_free - (char *)(h)->chunk                                        \
-    > (h)->chunk_limit - (char *)(h)->chunk)                           \
-   ? ((h)->next_free = (h)->chunk_limit) : 0),                         \
-  (h)->object_base = (h)->next_free,                                   \
-  __INT_TO_PTR ((h)->temp))
-
-#ifdef __STDC__
-#define obstack_free(h,obj)                                            \
-( (h)->temp = (char *)(obj) - (char *) (h)->chunk,                     \
-  (((h)->temp >= 0 && (h)->temp < (h)->chunk_limit - (char *) (h)->chunk)\
-   ? (int) ((h)->next_free = (h)->object_base                          \
-           = (h)->temp + (char *) (h)->chunk)                          \
-   : ((obstack_free) ((h), (h)->temp + (char *) (h)->chunk), 0)))
-#else
-#define obstack_free(h,obj)                                            \
-( (h)->temp = (char *)(obj) - (char *) (h)->chunk,                     \
-  (((h)->temp >= 0 && (h)->temp < (h)->chunk_limit - (char *) (h)->chunk)\
-   ? (int) ((h)->next_free = (h)->object_base                          \
-           = (h)->temp + (char *) (h)->chunk)                          \
-   : (int) _obstack_free ((h), (h)->temp + (char *) (h)->chunk)))
-#endif
-
-#endif /* not __GNUC__ or not __STDC__ */
-
-/* Declare the external functions we use; they are in obstack.c.  */
-
-#ifdef __STDC__
-  extern int _obstack_newchunk (struct obstack *h, int length);
-  extern int _obstack_free (struct obstack *h, void *obj);
-  extern void _obstack_begin (struct obstack *h, int size, int alignment,
-                             void *(*chunkfun) (), void (*freefun) ());
-#else
-  extern int _obstack_newchunk ();
-  extern int _obstack_free ();
-  extern void _obstack_begin ();
-#endif
-
-#endif /* not __OBSTACKS__ */
-
diff --git a/bfd/opc-sparc.c b/bfd/opc-sparc.c
deleted file mode 100644 (file)
index a0c54ab..0000000
+++ /dev/null
@@ -1,1811 +0,0 @@
-/* to sanitize this file, grep -v v9 < sparc.h > clean-sparc.h */
-
-/* Table of opcodes for the sparc.
-       Copyright 1989, 1991, 1992 Free Software Foundation, Inc.
-
-This file is part of the BFD library.
-
-BFD is free software; you can redistribute it and/or modify it under
-the terms of the GNU General Public License as published by the Free
-Software Foundation; either version 2, or (at your option) any later
-version.
-
-BFD is distributed in the hope that it will be useful, but WITHOUT ANY
-WARRANTY; without even the implied warranty of MERCHANTABILITY or
-FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-for more details.
-
-You should have received a copy of the GNU General Public License
-along with this software; see the file COPYING.  If not, write to
-the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-/* FIXME-someday: perhaps the ,a's and such should be embedded in the
-   instruction's name rather than the args.  This would make gas faster, pinsn
-   slower, but would mess up some macros a bit.  xoxorich. */
-
-#include <stdio.h>
-#include "ansidecl.h"
-#define BFD_EMIT_TABLE
-#include "opcode/sparc.h"
-
-const char *architecture_pname[] = {
-       "v6",
-       "v7",
-       "v8",
-       "sparclite",
-       "v9",
-       NULL,
-};
-
-
-#define COND(x)                (((x)&0xf)<<25)
-#define MCOND(x,i_or_f)        ((((i_or_f)&1)<<18)|(((x)>>11)&(0xf<<14)))      /* v9 */
-
-#define CONDA  (COND(0x8))
-#define CONDCC (COND(0xd))
-#define CONDCS (COND(0x5))
-#define CONDE  (COND(0x1))
-#define CONDG  (COND(0xa))
-#define CONDGE (COND(0xb))
-#define CONDGU (COND(0xc))
-#define CONDL  (COND(0x3))
-#define CONDLE (COND(0x2))
-#define CONDLEU        (COND(0x4))
-#define CONDN  (COND(0x0))
-#define CONDNE (COND(0x9))
-#define CONDNEG        (COND(0x6))
-#define CONDPOS        (COND(0xe))
-#define CONDVC (COND(0xf))
-#define CONDVS (COND(0x7))
-
-#define CONDNZ CONDNE
-#define CONDZ  CONDE
-#define CONDGEU        CONDCC
-#define CONDLU CONDCS
-
-#define FCONDA         (COND(0x8))
-#define FCONDE         (COND(0x9))
-#define FCONDG         (COND(0x6))
-#define FCONDGE                (COND(0xb))
-#define FCONDL         (COND(0x4))
-#define FCONDLE                (COND(0xd))
-#define FCONDLG                (COND(0x2))
-#define FCONDN         (COND(0x0))
-#define FCONDNE                (COND(0x1))
-#define FCONDO         (COND(0xf))
-#define FCONDU         (COND(0x7))
-#define FCONDUE                (COND(0xa))
-#define FCONDUG                (COND(0x5))
-#define FCONDUGE       (COND(0xc))
-#define FCONDUL                (COND(0x3))
-#define FCONDULE       (COND(0xe))
-
-#define FCONDNZ        FCONDNE
-#define FCONDZ FCONDE
-
-#define ICC (0)        /* v9 */
-#define XCC (1<<11) /* v9 */
-#define FCC(x) (((x)&0x3)<<11) /* v9 */
-#define FBFCC(x)       (((x)&0x3)<<20) /* v9 */
-
-/* The order of the opcodes in the table is significant:
-       
-       * The assembler requires that all instances of the same mnemonic must
-       be consecutive. If they aren't, the assembler will bomb at runtime.
-
-       * The disassembler should not care about the order of the opcodes.
-
-*/
-
-struct sparc_opcode sparc_opcodes[] = {
-
-{ "ld",        F3(3, 0x00, 0), F3(~3, ~0x00, ~0),              "[1+2],d", 0, v6 },
-{ "ld",        F3(3, 0x00, 0), F3(~3, ~0x00, ~0)|RS2_G0,       "[1],d", 0, v6 }, /* ld [rs1+%g0],d */
-{ "ld",        F3(3, 0x00, 1), F3(~3, ~0x00, ~1),              "[1+i],d", 0, v6 },
-{ "ld",        F3(3, 0x00, 1), F3(~3, ~0x00, ~1),              "[i+1],d", 0, v6 },
-{ "ld",        F3(3, 0x00, 1), F3(~3, ~0x00, ~1)|RS1_G0,       "[i],d", 0, v6 },
-{ "ld",        F3(3, 0x00, 1), F3(~3, ~0x00, ~1)|SIMM13(~0),   "[1],d", 0, v6 }, /* ld [rs1+0],d */
-{ "ld",        F3(3, 0x20, 0), F3(~3, ~0x20, ~0),              "[1+2],g", 0, v6 },
-{ "ld",        F3(3, 0x20, 0), F3(~3, ~0x20, ~0)|RS2_G0,       "[1],g", 0, v6 }, /* ld [rs1+%g0],d */
-{ "ld",        F3(3, 0x20, 1), F3(~3, ~0x20, ~1),              "[1+i],g", 0, v6 },
-{ "ld",        F3(3, 0x20, 1), F3(~3, ~0x20, ~1),              "[i+1],g", 0, v6 },
-{ "ld",        F3(3, 0x20, 1), F3(~3, ~0x20, ~1)|RS1_G0,       "[i],g", 0, v6 },
-{ "ld",        F3(3, 0x20, 1), F3(~3, ~0x20, ~1)|SIMM13(~0),   "[1],g", 0, v6 }, /* ld [rs1+0],d */
-{ "ld",        F3(3, 0x21, 0), F3(~3, ~0x21, ~0),              "[1+2],F", 0, v6 },
-{ "ld",        F3(3, 0x21, 0), F3(~3, ~0x21, ~0)|RS2_G0,       "[1],F", 0, v6 }, /* ld [rs1+%g0],d */
-{ "ld",        F3(3, 0x21, 1), F3(~3, ~0x21, ~1),              "[1+i],F", 0, v6 },
-{ "ld",        F3(3, 0x21, 1), F3(~3, ~0x21, ~1),              "[i+1],F", 0, v6 },
-{ "ld",        F3(3, 0x21, 1), F3(~3, ~0x21, ~1)|RS1_G0,       "[i],F", 0, v6 },
-{ "ld",        F3(3, 0x21, 1), F3(~3, ~0x21, ~1)|SIMM13(~0),   "[1],F", 0, v6 }, /* ld [rs1+0],d */
-{ "ld",        F3(3, 0x30, 0), F3(~3, ~0x30, ~0),              "[1+2],D", 0, v6 },
-{ "ld",        F3(3, 0x30, 0), F3(~3, ~0x30, ~0)|RS2_G0,       "[1],D", 0, v6 }, /* ld [rs1+%g0],d */
-{ "ld",        F3(3, 0x30, 1), F3(~3, ~0x30, ~1),              "[1+i],D", 0, v6 },
-{ "ld",        F3(3, 0x30, 1), F3(~3, ~0x30, ~1),              "[i+1],D", 0, v6 },
-{ "ld",        F3(3, 0x30, 1), F3(~3, ~0x30, ~1)|RS1_G0,       "[i],D", 0, v6 },
-{ "ld",        F3(3, 0x30, 1), F3(~3, ~0x30, ~1)|SIMM13(~0),   "[1],D", 0, v6 }, /* ld [rs1+0],d */
-{ "ld",        F3(3, 0x31, 0), F3(~3, ~0x31, ~0),              "[1+2],C", 0, v6 },
-{ "ld",        F3(3, 0x31, 0), F3(~3, ~0x31, ~0)|RS2_G0,       "[1],C", 0, v6 }, /* ld [rs1+%g0],d */
-{ "ld",        F3(3, 0x31, 1), F3(~3, ~0x31, ~1),              "[1+i],C", 0, v6 },
-{ "ld",        F3(3, 0x31, 1), F3(~3, ~0x31, ~1),              "[i+1],C", 0, v6 },
-{ "ld",        F3(3, 0x31, 1), F3(~3, ~0x31, ~1)|RS1_G0,       "[i],C", 0, v6 },
-{ "ld",        F3(3, 0x31, 1), F3(~3, ~0x31, ~1)|SIMM13(~0),   "[1],C", 0, v6 }, /* ld [rs1+0],d */
-
- /* FIXME-v9: combine ld, lduw, & ldw in macros. */
-{ "ldw",       F3(3, 0x00, 0), F3(~3, ~0x00, ~0),              "[1+2],d", F_ALIAS, v9 }, /* ldw === ld */
-{ "ldw",       F3(3, 0x00, 0), F3(~3, ~0x00, ~0)|RS2_G0,       "[1],d", F_ALIAS, v9 }, /* ld [rs1+%g0],d */
-{ "ldw",       F3(3, 0x00, 1), F3(~3, ~0x00, ~1),              "[1+i],d", F_ALIAS, v9 },
-{ "ldw",       F3(3, 0x00, 1), F3(~3, ~0x00, ~1),              "[i+1],d", F_ALIAS, v9 },
-{ "ldw",       F3(3, 0x00, 1), F3(~3, ~0x00, ~1)|RS1_G0,       "[i],d", F_ALIAS, v9 },
-{ "ldw",       F3(3, 0x00, 1), F3(~3, ~0x00, ~1)|SIMM13(~0),   "[1],d", F_ALIAS, v9 }, /* ld [rs1+0],d */
-{ "ldw",       F3(3, 0x20, 0), F3(~3, ~0x20, ~0),              "[1+2],g", F_ALIAS, v9 },
-{ "ldw",       F3(3, 0x20, 0), F3(~3, ~0x20, ~0)|RS2_G0,       "[1],g", F_ALIAS, v9 }, /* ld [rs1+%g0],d */
-{ "ldw",       F3(3, 0x20, 1), F3(~3, ~0x20, ~1),              "[1+i],g", F_ALIAS, v9 },
-{ "ldw",       F3(3, 0x20, 1), F3(~3, ~0x20, ~1),              "[i+1],g", F_ALIAS, v9 },
-{ "ldw",       F3(3, 0x20, 1), F3(~3, ~0x20, ~1)|RS1_G0,       "[i],g", F_ALIAS, v9 },
-{ "ldw",       F3(3, 0x20, 1), F3(~3, ~0x20, ~1)|SIMM13(~0),   "[1],g", F_ALIAS, v9 }, /* ld [rs1+0],d */
-{ "ldw",       F3(3, 0x21, 0), F3(~3, ~0x21, ~0),              "[1+2],F", F_ALIAS, v9 },
-{ "ldw",       F3(3, 0x21, 0), F3(~3, ~0x21, ~0)|RS2_G0,       "[1],F", F_ALIAS, v9 }, /* ld [rs1+%g0],d */
-{ "ldw",       F3(3, 0x21, 1), F3(~3, ~0x21, ~1),              "[1+i],F", F_ALIAS, v9 },
-{ "ldw",       F3(3, 0x21, 1), F3(~3, ~0x21, ~1),              "[i+1],F", F_ALIAS, v9 },
-{ "ldw",       F3(3, 0x21, 1), F3(~3, ~0x21, ~1)|RS1_G0,       "[i],F", F_ALIAS, v9 },
-{ "ldw",       F3(3, 0x21, 1), F3(~3, ~0x21, ~1)|SIMM13(~0),   "[1],F", F_ALIAS, v9 }, /* ld [rs1+0],d */
-{ "ldw",       F3(3, 0x30, 0), F3(~3, ~0x30, ~0),              "[1+2],D", F_ALIAS, v9 },
-{ "ldw",       F3(3, 0x30, 0), F3(~3, ~0x30, ~0)|RS2_G0,       "[1],D", F_ALIAS, v9 }, /* ld [rs1+%g0],d */
-{ "ldw",       F3(3, 0x30, 1), F3(~3, ~0x30, ~1),              "[1+i],D", F_ALIAS, v9 },
-{ "ldw",       F3(3, 0x30, 1), F3(~3, ~0x30, ~1),              "[i+1],D", F_ALIAS, v9 },
-{ "ldw",       F3(3, 0x30, 1), F3(~3, ~0x30, ~1)|RS1_G0,       "[i],D", F_ALIAS, v9 },
-{ "ldw",       F3(3, 0x30, 1), F3(~3, ~0x30, ~1)|SIMM13(~0),   "[1],D", F_ALIAS, v9 }, /* ld [rs1+0],d */
-{ "ldw",       F3(3, 0x31, 0), F3(~3, ~0x31, ~0),              "[1+2],C", F_ALIAS, v9 },
-{ "ldw",       F3(3, 0x31, 0), F3(~3, ~0x31, ~0)|RS2_G0,       "[1],C", F_ALIAS, v9 }, /* ld [rs1+%g0],d */
-{ "ldw",       F3(3, 0x31, 1), F3(~3, ~0x31, ~1),              "[1+i],C", F_ALIAS, v9 },
-{ "ldw",       F3(3, 0x31, 1), F3(~3, ~0x31, ~1),              "[i+1],C", F_ALIAS, v9 },
-{ "ldw",       F3(3, 0x31, 1), F3(~3, ~0x31, ~1)|RS1_G0,       "[i],C", F_ALIAS, v9 },
-{ "ldw",       F3(3, 0x31, 1), F3(~3, ~0x31, ~1)|SIMM13(~0),   "[1],C", F_ALIAS, v9 }, /* ld [rs1+0],d */
-
-{ "lduw",      F3(3, 0x00, 0), F3(~3, ~0x00, ~0),              "[1+2],d", F_ALIAS, v9 }, /* lduw === ld */
-{ "lduw",      F3(3, 0x00, 0), F3(~3, ~0x00, ~0)|RS2_G0,       "[1],d", F_ALIAS, v9 }, /* ld [rs1+%g0],d */
-{ "lduw",      F3(3, 0x00, 1), F3(~3, ~0x00, ~1),              "[1+i],d", F_ALIAS, v9 },
-{ "lduw",      F3(3, 0x00, 1), F3(~3, ~0x00, ~1),              "[i+1],d", F_ALIAS, v9 },
-{ "lduw",      F3(3, 0x00, 1), F3(~3, ~0x00, ~1)|RS1_G0,       "[i],d", F_ALIAS, v9 },
-{ "lduw",      F3(3, 0x00, 1), F3(~3, ~0x00, ~1)|SIMM13(~0),   "[1],d", F_ALIAS, v9 }, /* ld [rs1+0],d */
-{ "lduw",      F3(3, 0x20, 0), F3(~3, ~0x20, ~0),              "[1+2],g", F_ALIAS, v9 },
-{ "lduw",      F3(3, 0x20, 0), F3(~3, ~0x20, ~0)|RS2_G0,       "[1],g", F_ALIAS, v9 }, /* ld [rs1+%g0],d */
-{ "lduw",      F3(3, 0x20, 1), F3(~3, ~0x20, ~1),              "[1+i],g", F_ALIAS, v9 },
-{ "lduw",      F3(3, 0x20, 1), F3(~3, ~0x20, ~1),              "[i+1],g", F_ALIAS, v9 },
-{ "lduw",      F3(3, 0x20, 1), F3(~3, ~0x20, ~1)|RS1_G0,       "[i],g", F_ALIAS, v9 },
-{ "lduw",      F3(3, 0x20, 1), F3(~3, ~0x20, ~1)|SIMM13(~0),   "[1],g", F_ALIAS, v9 }, /* ld [rs1+0],d */
-{ "lduw",      F3(3, 0x21, 0), F3(~3, ~0x21, ~0),              "[1+2],F", F_ALIAS, v9 },
-{ "lduw",      F3(3, 0x21, 0), F3(~3, ~0x21, ~0)|RS2_G0,       "[1],F", F_ALIAS, v9 }, /* ld [rs1+%g0],d */
-{ "lduw",      F3(3, 0x21, 1), F3(~3, ~0x21, ~1),              "[1+i],F", F_ALIAS, v9 },
-{ "lduw",      F3(3, 0x21, 1), F3(~3, ~0x21, ~1),              "[i+1],F", F_ALIAS, v9 },
-{ "lduw",      F3(3, 0x21, 1), F3(~3, ~0x21, ~1)|RS1_G0,       "[i],F", F_ALIAS, v9 },
-{ "lduw",      F3(3, 0x21, 1), F3(~3, ~0x21, ~1)|SIMM13(~0),   "[1],F", F_ALIAS, v9 }, /* ld [rs1+0],d */
-{ "lduw",      F3(3, 0x30, 0), F3(~3, ~0x30, ~0),              "[1+2],D", F_ALIAS, v9 },
-{ "lduw",      F3(3, 0x30, 0), F3(~3, ~0x30, ~0)|RS2_G0,       "[1],D", F_ALIAS, v9 }, /* ld [rs1+%g0],d */
-{ "lduw",      F3(3, 0x30, 1), F3(~3, ~0x30, ~1),              "[1+i],D", F_ALIAS, v9 },
-{ "lduw",      F3(3, 0x30, 1), F3(~3, ~0x30, ~1),              "[i+1],D", F_ALIAS, v9 },
-{ "lduw",      F3(3, 0x30, 1), F3(~3, ~0x30, ~1)|RS1_G0,       "[i],D", F_ALIAS, v9 },
-{ "lduw",      F3(3, 0x30, 1), F3(~3, ~0x30, ~1)|SIMM13(~0),   "[1],D", F_ALIAS, v9 }, /* ld [rs1+0],d */
-{ "lduw",      F3(3, 0x31, 0), F3(~3, ~0x31, ~0),              "[1+2],C", F_ALIAS, v9 },
-{ "lduw",      F3(3, 0x31, 0), F3(~3, ~0x31, ~0)|RS2_G0,       "[1],C", F_ALIAS, v9 }, /* ld [rs1+%g0],d */
-{ "lduw",      F3(3, 0x31, 1), F3(~3, ~0x31, ~1),              "[1+i],C", F_ALIAS, v9 },
-{ "lduw",      F3(3, 0x31, 1), F3(~3, ~0x31, ~1),              "[i+1],C", F_ALIAS, v9 },
-{ "lduw",      F3(3, 0x31, 1), F3(~3, ~0x31, ~1)|RS1_G0,       "[i],C", F_ALIAS, v9 },
-{ "lduw",      F3(3, 0x31, 1), F3(~3, ~0x31, ~1)|SIMM13(~0),   "[1],C", F_ALIAS, v9 }, /* ld [rs1+0],d */
-
-{ "lda",       F3(3, 0x10, 0), F3(~3, ~0x10, ~0),              "[1+2]A,d", 0, v6 },
-{ "lda",       F3(3, 0x10, 0), F3(~3, ~0x10, ~0)|RS2_G0,       "[1]A,d", 0, v6 }, /* lda [rs1+%g0],d */
-
-{ "ldd",       F3(3, 0x03, 0), F3(~3, ~0x03, ~0)|ASI(~0),      "[1+2],d", 0, v6 },
-{ "ldd",       F3(3, 0x03, 0), F3(~3, ~0x03, ~0)|ASI_RS2(~0),  "[1],d", 0, v6 }, /* ldd [rs1+%g0],d */
-{ "ldd",       F3(3, 0x03, 1), F3(~3, ~0x03, ~1),              "[1+i],d", 0, v6 },
-{ "ldd",       F3(3, 0x03, 1), F3(~3, ~0x03, ~1),              "[i+1],d", 0, v6 },
-{ "ldd",       F3(3, 0x03, 1), F3(~3, ~0x03, ~1)|RS1_G0,       "[i],d", 0, v6 },
-{ "ldd",       F3(3, 0x03, 1), F3(~3, ~0x03, ~1)|SIMM13(~0),   "[1],d", 0, v6 }, /* ldd [rs1+0],d */
-{ "ldd",       F3(3, 0x23, 0), F3(~3, ~0x23, ~0)|ASI(~0),      "[1+2],g", 0, v6 },
-{ "ldd",       F3(3, 0x23, 0), F3(~3, ~0x23, ~0)|ASI_RS2(~0),  "[1],g", 0, v6 }, /* ldd [rs1+%g0],d */
-{ "ldd",       F3(3, 0x23, 1), F3(~3, ~0x23, ~1),              "[1+i],g", 0, v6 },
-{ "ldd",       F3(3, 0x23, 1), F3(~3, ~0x23, ~1),              "[i+1],g", 0, v6 },
-{ "ldd",       F3(3, 0x23, 1), F3(~3, ~0x23, ~1)|RS1_G0,       "[i],g", 0, v6 },
-{ "ldd",       F3(3, 0x23, 1), F3(~3, ~0x23, ~1)|SIMM13(~0),   "[1],g", 0, v6 }, /* ldd [rs1+0],d */
-{ "ldd",       F3(3, 0x33, 0), F3(~3, ~0x33, ~0)|ASI(~0),      "[1+2],D", 0, v6 },
-{ "ldd",       F3(3, 0x33, 0), F3(~3, ~0x33, ~0)|ASI_RS2(~0),  "[1],D", 0, v6 }, /* ldd [rs1+%g0],d */
-{ "ldd",       F3(3, 0x33, 1), F3(~3, ~0x33, ~1),              "[1+i],D", 0, v6 },
-{ "ldd",       F3(3, 0x33, 1), F3(~3, ~0x33, ~1),              "[i+1],D", 0, v6 },
-{ "ldd",       F3(3, 0x33, 1), F3(~3, ~0x33, ~1)|RS1_G0,       "[i],D", 0, v6 },
-{ "ldd",       F3(3, 0x33, 1), F3(~3, ~0x33, ~1)|SIMM13(~0),   "[1],D", 0, v6 }, /* ldd [rs1+0],d */
-{ "ldsb",      F3(3, 0x09, 0), F3(~3, ~0x09, ~0)|ASI(~0),      "[1+2],d", 0, v6 },
-{ "ldsb",      F3(3, 0x09, 0), F3(~3, ~0x09, ~0)|ASI_RS2(~0),  "[1],d", 0, v6 }, /* ldsb [rs1+%g0],d */
-{ "ldsb",      F3(3, 0x09, 1), F3(~3, ~0x09, ~1),              "[1+i],d", 0, v6 },
-{ "ldsb",      F3(3, 0x09, 1), F3(~3, ~0x09, ~1),              "[i+1],d", 0, v6 },
-{ "ldsb",      F3(3, 0x09, 1), F3(~3, ~0x09, ~1)|RS1_G0,       "[i],d", 0, v6 },
-{ "ldsb",      F3(3, 0x09, 1), F3(~3, ~0x09, ~1)|SIMM13(~0),   "[1],d", 0, v6 }, /* ldsb [rs1+0],d */
-{ "ldsh",      F3(3, 0x0a, 0), F3(~3, ~0x0a, ~0)|ASI_RS2(~0),  "[1],d", 0, v6 }, /* ldsh [rs1+%g0],d */
-{ "ldsh",      F3(3, 0x0a, 0), F3(~3, ~0x0a, ~0)|ASI(~0),      "[1+2],d", 0, v6 },
-{ "ldsh",      F3(3, 0x0a, 1), F3(~3, ~0x0a, ~1),              "[1+i],d", 0, v6 },
-{ "ldsh",      F3(3, 0x0a, 1), F3(~3, ~0x0a, ~1),              "[i+1],d", 0, v6 },
-{ "ldsh",      F3(3, 0x0a, 1), F3(~3, ~0x0a, ~1)|RS1_G0,       "[i],d", 0, v6 },
-{ "ldsh",      F3(3, 0x0a, 1), F3(~3, ~0x0a, ~1)|SIMM13(~0),   "[1],d", 0, v6 }, /* ldsh [rs1+0],d */
-{ "ldstub",    F3(3, 0x0d, 0), F3(~3, ~0x0d, ~0)|ASI(~0),      "[1+2],d", 0, v6 },
-{ "ldstub",    F3(3, 0x0d, 0), F3(~3, ~0x0d, ~0)|ASI_RS2(~0),  "[1],d", 0, v6 }, /* ldstub [rs1+%g0],d */
-{ "ldstub",    F3(3, 0x0d, 1), F3(~3, ~0x0d, ~1),              "[1+i],d", 0, v6 },
-{ "ldstub",    F3(3, 0x0d, 1), F3(~3, ~0x0d, ~1),              "[i+1],d", 0, v6 },
-{ "ldstub",    F3(3, 0x0d, 1), F3(~3, ~0x0d, ~1)|RS1_G0,       "[i],d", 0, v6 },
-{ "ldsw",      F3(3, 0x08, 0), F3(~3, ~0x08, ~0)|ASI(~0),      "[1+2],d", 0, v9 },
-{ "ldsw",      F3(3, 0x08, 0), F3(~3, ~0x08, ~0)|ASI_RS2(~0),  "[1],d", 0, v9 }, /* ldsw [rs1+%g0],d */
-{ "ldsw",      F3(3, 0x08, 1), F3(~3, ~0x08, ~1),              "[1+i],d", 0, v9 },
-{ "ldsw",      F3(3, 0x08, 1), F3(~3, ~0x08, ~1),              "[i+1],d", 0, v9 },
-{ "ldsw",      F3(3, 0x08, 1), F3(~3, ~0x08, ~1)|RS1_G0,       "[i],d", 0, v9 },
-{ "ldsw",      F3(3, 0x08, 1), F3(~3, ~0x08, ~1)|SIMM13(~0),   "[1],d", 0, v9 }, /* ldsw [rs1+0],d */
-{ "ldub",      F3(3, 0x01, 0), F3(~3, ~0x01, ~0)|ASI(~0),      "[1+2],d", 0, v6 },
-{ "ldub",      F3(3, 0x01, 0), F3(~3, ~0x01, ~0)|ASI_RS2(~0),  "[1],d", 0, v6 }, /* ldub [rs1+%g0],d */
-{ "ldub",      F3(3, 0x01, 1), F3(~3, ~0x01, ~1),              "[1+i],d", 0, v6 },
-{ "ldub",      F3(3, 0x01, 1), F3(~3, ~0x01, ~1),              "[i+1],d", 0, v6 },
-{ "ldub",      F3(3, 0x01, 1), F3(~3, ~0x01, ~1)|RS1_G0,       "[i],d", 0, v6 },
-{ "ldub",      F3(3, 0x01, 1), F3(~3, ~0x01, ~1)|SIMM13(~0),   "[1],d", 0, v6 }, /* ldub [rs1+0],d */
-{ "lduh",      F3(3, 0x02, 0), F3(~3, ~0x02, ~0)|ASI(~0),      "[1+2],d", 0, v6 },
-{ "lduh",      F3(3, 0x02, 0), F3(~3, ~0x02, ~0)|ASI_RS2(~0),  "[1],d", 0, v6 }, /* lduh [rs1+%g0],d */
-{ "lduh",      F3(3, 0x02, 1), F3(~3, ~0x02, ~1),              "[1+i],d", 0, v6 },
-{ "lduh",      F3(3, 0x02, 1), F3(~3, ~0x02, ~1),              "[i+1],d", 0, v6 },
-{ "lduh",      F3(3, 0x02, 1), F3(~3, ~0x02, ~1)|RS1_G0,       "[i],d", 0, v6 },
-{ "lduh",      F3(3, 0x02, 1), F3(~3, ~0x02, ~1)|SIMM13(~0),   "[1],d", 0, v6 }, /* lduh [rs1+0],d */
-
-{ "ldx",       F3(3, 0x0b, 0), F3(~3, ~0x0b, ~0)|ASI(~0),      "[1+2],d", 0, v9 },
-{ "ldx",       F3(3, 0x0b, 0), F3(~3, ~0x0b, ~0)|ASI_RS2(~0),  "[1],d", 0, v9 }, /* ldx [rs1+%g0],d */
-{ "ldx",       F3(3, 0x0b, 1), F3(~3, ~0x0b, ~1),              "[1+i],d", 0, v9 },
-{ "ldx",       F3(3, 0x0b, 1), F3(~3, ~0x0b, ~1),              "[i+1],d", 0, v9 },
-{ "ldx",       F3(3, 0x0b, 1), F3(~3, ~0x0b, ~1)|RS1_G0,       "[i],d", 0, v9 },
-{ "ldx",       F3(3, 0x0b, 1), F3(~3, ~0x0b, ~1)|SIMM13(~0),   "[1],d", 0, v9 }, /* ldx [rs1+0],d */
-{ "ldx",       F3(3, 0x29, 0), F3(~3, ~0x29, ~0),              "[1+2],F", 0, v9 },
-{ "ldx",       F3(3, 0x29, 0), F3(~3, ~0x29, ~0)|RS2_G0,       "[1],F", 0, v9 }, /* ld [rs1+%g0],d */
-{ "ldx",       F3(3, 0x29, 1), F3(~3, ~0x29, ~1),              "[1+i],F", 0, v9 },
-{ "ldx",       F3(3, 0x29, 1), F3(~3, ~0x29, ~1),              "[i+1],F", 0, v9 },
-{ "ldx",       F3(3, 0x29, 1), F3(~3, ~0x29, ~1)|RS1_G0,       "[i],F", 0, v9 },
-{ "ldx",       F3(3, 0x29, 1), F3(~3, ~0x29, ~1)|SIMM13(~0),   "[1],F", 0, v9 }, /* ld [rs1+0],d */
-
-{ "ldda",      F3(3, 0x13, 0), F3(~3, ~0x13, ~0),              "[1+2]A,d", 0, v6 },
-{ "ldda",      F3(3, 0x13, 0), F3(~3, ~0x13, ~0)|RS2_G0,       "[1]A,d", 0, v6 }, /* ldda [rs1+%g0],d */
-{ "ldsba",     F3(3, 0x19, 0), F3(~3, ~0x19, ~0),              "[1+2]A,d", 0, v6 },
-{ "ldsba",     F3(3, 0x19, 0), F3(~3, ~0x19, ~0)|RS2_G0,       "[1]A,d", 0, v6 }, /* ldsba [rs1+%g0],d */
-{ "ldsha",     F3(3, 0x1a, 0), F3(~3, ~0x1a, ~0),              "[1+2]A,d", 0, v6 },
-{ "ldsha",     F3(3, 0x1a, 0), F3(~3, ~0x1a, ~0)|RS2_G0,       "[1]A,d", 0, v6 }, /* ldsha [rs1+%g0],d */
-{ "ldstuba",   F3(3, 0x1d, 0), F3(~3, ~0x1d, ~0),              "[1+2]A,d", 0, v6 },
-{ "ldstuba",   F3(3, 0x1d, 0), F3(~3, ~0x1d, ~0)|RS2_G0,       "[1]A,d", 0, v6 }, /* ldstuba [rs1+%g0],d */
-{ "ldswa",     F3(3, 0x18, 0), F3(~3, ~0x18, ~0),              "[1+2]A,d", 0, v9 }, /* lduwa === lda */
-{ "ldswa",     F3(3, 0x18, 0), F3(~3, ~0x18, ~0)|RS2_G0,       "[1]A,d", 0, v9 }, /* lda [rs1+%g0],d */
-{ "lduba",     F3(3, 0x11, 0), F3(~3, ~0x11, ~0),              "[1+2]A,d", 0, v6 },
-{ "lduba",     F3(3, 0x11, 0), F3(~3, ~0x11, ~0)|RS2_G0,       "[1]A,d", 0, v6 }, /* lduba [rs1+%g0],d */
-{ "lduha",     F3(3, 0x12, 0), F3(~3, ~0x12, ~0),              "[1+2]A,d", 0, v6 },
-{ "lduha",     F3(3, 0x12, 0), F3(~3, ~0x12, ~0)|RS2_G0,       "[1]A,d", 0, v6 }, /* lduha [rs1+%g0],d */
-{ "lduwa",     F3(3, 0x10, 0), F3(~3, ~0x10, ~0),              "[1+2]A,d", F_ALIAS, v9 }, /* lduwa === lda */
-{ "lduwa",     F3(3, 0x10, 0), F3(~3, ~0x10, ~0)|RS2_G0,       "[1]A,d", F_ALIAS, v9 }, /* lda [rs1+%g0],d */
-{ "ldxa",      F3(3, 0x1b, 0), F3(~3, ~0x1b, ~0),              "[1+2]A,d", 0, v9 }, /* lduwa === lda */
-{ "ldxa",      F3(3, 0x1b, 0), F3(~3, ~0x1b, ~0)|RS2_G0,       "[1]A,d", 0, v9 }, /* lda [rs1+%g0],d */
-
-{ "st",        F3(3, 0x04, 0), F3(~3, ~0x04, ~0)|ASI(~0),              "d,[1+2]", 0, v6 },
-{ "st",        F3(3, 0x04, 0), F3(~3, ~0x04, ~0)|ASI_RS2(~0),          "d,[1]", 0, v6 }, /* st d,[rs1+%g0] */
-{ "st",        F3(3, 0x04, 1), F3(~3, ~0x04, ~1),                      "d,[1+i]", 0, v6 },
-{ "st",        F3(3, 0x04, 1), F3(~3, ~0x04, ~1),                      "d,[i+1]", 0, v6 },
-{ "st",        F3(3, 0x04, 1), F3(~3, ~0x04, ~1)|RS1_G0,               "d,[i]", 0, v6 },
-{ "st",        F3(3, 0x04, 1), F3(~3, ~0x04, ~1)|SIMM13(~0),           "d,[1]", 0, v6 }, /* st d,[rs1+0] */
-{ "st",        F3(3, 0x24, 0), F3(~3, ~0x24, ~0)|ASI(~0),              "g,[1+2]", 0, v6 },
-{ "st",        F3(3, 0x24, 0), F3(~3, ~0x24, ~0)|ASI_RS2(~0),          "g,[1]", 0, v6 }, /* st d[rs1+%g0] */
-{ "st",        F3(3, 0x24, 1), F3(~3, ~0x24, ~1),                      "g,[1+i]", 0, v6 },
-{ "st",        F3(3, 0x24, 1), F3(~3, ~0x24, ~1),                      "g,[i+1]", 0, v6 },
-{ "st",        F3(3, 0x24, 1), F3(~3, ~0x24, ~1)|RS1_G0,               "g,[i]", 0, v6 },
-{ "st",        F3(3, 0x24, 1), F3(~3, ~0x24, ~1)|SIMM13(~0),           "g,[1]", 0, v6 }, /* st d,[rs1+0] */
-{ "st",        F3(3, 0x34, 0), F3(~3, ~0x34, ~0)|ASI(~0),              "D,[1+2]", 0, v6 },
-{ "st",        F3(3, 0x34, 0), F3(~3, ~0x34, ~0)|ASI_RS2(~0),          "D,[1]", 0, v6 }, /* st d,[rs1+%g0] */
-{ "st",        F3(3, 0x34, 1), F3(~3, ~0x34, ~1),                      "D,[1+i]", 0, v6 },
-{ "st",        F3(3, 0x34, 1), F3(~3, ~0x34, ~1),                      "D,[i+1]", 0, v6 },
-{ "st",        F3(3, 0x34, 1), F3(~3, ~0x34, ~1)|RS1_G0,               "D,[i]", 0, v6 },
-{ "st",        F3(3, 0x34, 1), F3(~3, ~0x34, ~1)|SIMM13(~0),           "D,[1]", 0, v6 }, /* st d,[rs1+0] */
-{ "st",        F3(3, 0x35, 0), F3(~3, ~0x35, ~0)|ASI(~0),              "C,[1+2]", 0, v6 },
-{ "st",        F3(3, 0x35, 0), F3(~3, ~0x35, ~0)|ASI_RS2(~0),          "C,[1]", 0, v6 }, /* st d,[rs1+%g0] */
-{ "st",        F3(3, 0x35, 1), F3(~3, ~0x35, ~1),                      "C,[1+i]", 0, v6 },
-{ "st",        F3(3, 0x35, 1), F3(~3, ~0x35, ~1),                      "C,[i+1]", 0, v6 },
-{ "st",        F3(3, 0x35, 1), F3(~3, ~0x35, ~1)|RS1_G0,               "C,[i]", 0, v6 },
-{ "st",        F3(3, 0x35, 1), F3(~3, ~0x35, ~1)|SIMM13(~0),           "C,[1]", 0, v6 }, /* st d,[rs1+0] */
-
-{ "st",        F3(3, 0x25, 0), F3(~3, ~0x25, ~0)|RD_G0|ASI(~0),        "F,[1+2]", 0, v6 },
-{ "st",        F3(3, 0x25, 0), F3(~3, ~0x25, ~0)|RD_G0|ASI_RS2(~0),    "F,[1]", 0, v6 }, /* st d,[rs1+%g0] */
-{ "st",        F3(3, 0x25, 1), F3(~3, ~0x25, ~1)|RD_G0,                "F,[1+i]", 0, v6 },
-{ "st",        F3(3, 0x25, 1), F3(~3, ~0x25, ~1)|RD_G0,                "F,[i+1]", 0, v6 },
-{ "st",        F3(3, 0x25, 1), F3(~3, ~0x25, ~1)|RD_G0|RS1_G0,         "F,[i]", 0, v6 },
-{ "st",        F3(3, 0x25, 1), F3(~3, ~0x25, ~1)|SIMM13(~0),           "F,[1]", 0, v6 }, /* st d,[rs1+0] */
-
- /* FIXME-v9: combine st, stw, stuw, stsw, in macros. */
-{ "stw",       F3(3, 0x04, 0), F3(~3, ~0x04, ~0)|ASI(~0),              "d,[1+2]", F_ALIAS, v9 }, /* stw === st */
-{ "stw",       F3(3, 0x04, 0), F3(~3, ~0x04, ~0)|ASI_RS2(~0),          "d,[1]", F_ALIAS, v9 }, /* st d,[rs1+%g0] */
-{ "stw",       F3(3, 0x04, 1), F3(~3, ~0x04, ~1),                      "d,[1+i]", F_ALIAS, v9 },
-{ "stw",       F3(3, 0x04, 1), F3(~3, ~0x04, ~1),                      "d,[i+1]", F_ALIAS, v9 },
-{ "stw",       F3(3, 0x04, 1), F3(~3, ~0x04, ~1)|RS1_G0,               "d,[i]", F_ALIAS, v9 },
-{ "stw",       F3(3, 0x04, 1), F3(~3, ~0x04, ~1)|SIMM13(~0),           "d,[1]", F_ALIAS, v9 }, /* st d,[rs1+0] */
-{ "stw",       F3(3, 0x24, 0), F3(~3, ~0x24, ~0)|ASI(~0),              "g,[1+2]", F_ALIAS, v9 },
-{ "stw",       F3(3, 0x24, 0), F3(~3, ~0x24, ~0)|ASI_RS2(~0),          "g,[1]", F_ALIAS, v9 }, /* st d[rs1+%g0] */
-{ "stw",       F3(3, 0x24, 1), F3(~3, ~0x24, ~1),                      "g,[1+i]", F_ALIAS, v9 },
-{ "stw",       F3(3, 0x24, 1), F3(~3, ~0x24, ~1),                      "g,[i+1]", F_ALIAS, v9 },
-{ "stw",       F3(3, 0x24, 1), F3(~3, ~0x24, ~1)|RS1_G0,               "g,[i]", F_ALIAS, v9 },
-{ "stw",       F3(3, 0x24, 1), F3(~3, ~0x24, ~1)|SIMM13(~0),           "g,[1]", F_ALIAS, v9 }, /* st d,[rs1+0] */
-{ "stw",       F3(3, 0x34, 0), F3(~3, ~0x34, ~0)|ASI(~0),              "D,[1+2]", F_ALIAS, v9 },
-{ "stw",       F3(3, 0x34, 0), F3(~3, ~0x34, ~0)|ASI_RS2(~0),          "D,[1]", F_ALIAS, v9 }, /* st d,[rs1+%g0] */
-{ "stw",       F3(3, 0x34, 1), F3(~3, ~0x34, ~1),                      "D,[1+i]", F_ALIAS, v9 },
-{ "stw",       F3(3, 0x34, 1), F3(~3, ~0x34, ~1),                      "D,[i+1]", F_ALIAS, v9 },
-{ "stw",       F3(3, 0x34, 1), F3(~3, ~0x34, ~1)|RS1_G0,               "D,[i]", F_ALIAS, v9 },
-{ "stw",       F3(3, 0x34, 1), F3(~3, ~0x34, ~1)|SIMM13(~0),           "D,[1]", F_ALIAS, v9 }, /* st d,[rs1+0] */
-{ "stw",       F3(3, 0x35, 0), F3(~3, ~0x35, ~0)|ASI(~0),              "C,[1+2]", F_ALIAS, v9 },
-{ "stw",       F3(3, 0x35, 0), F3(~3, ~0x35, ~0)|ASI_RS2(~0),          "C,[1]", F_ALIAS, v9 }, /* st d,[rs1+%g0] */
-{ "stw",       F3(3, 0x35, 1), F3(~3, ~0x35, ~1),                      "C,[1+i]", F_ALIAS, v9 },
-{ "stw",       F3(3, 0x35, 1), F3(~3, ~0x35, ~1),                      "C,[i+1]", F_ALIAS, v9 },
-{ "stw",       F3(3, 0x35, 1), F3(~3, ~0x35, ~1)|RS1_G0,               "C,[i]", F_ALIAS, v9 },
-{ "stw",       F3(3, 0x35, 1), F3(~3, ~0x35, ~1)|SIMM13(~0),           "C,[1]", F_ALIAS, v9 }, /* st d,[rs1+0] */
-{ "stw",       F3(3, 0x25, 0), F3(~3, ~0x25, ~0)|RD_G0|ASI(~0),        "F,[1+2]", F_ALIAS, v9 },
-{ "stw",       F3(3, 0x25, 0), F3(~3, ~0x25, ~0)|RD_G0|ASI_RS2(~0),    "F,[1]", F_ALIAS, v9 }, /* st d,[rs1+%g0] */
-{ "stw",       F3(3, 0x25, 1), F3(~3, ~0x25, ~1)|RD_G0,                "F,[1+i]", F_ALIAS, v9 },
-{ "stw",       F3(3, 0x25, 1), F3(~3, ~0x25, ~1)|RD_G0,                "F,[i+1]", F_ALIAS, v9 },
-{ "stw",       F3(3, 0x25, 1), F3(~3, ~0x25, ~1)|RD_G0|RS1_G0, "F,[i]", F_ALIAS, v9 },
-{ "stw",       F3(3, 0x25, 1), F3(~3, ~0x25, ~1)|SIMM13(~0),           "F,[1]", F_ALIAS, v9 }, /* st d,[rs1+0] */
-
-{ "stuw",      F3(3, 0x04, 0), F3(~3, ~0x04, ~0)|ASI(~0),              "d,[1+2]", F_ALIAS, v9 }, /* stuw === st */
-{ "stuw",      F3(3, 0x04, 0), F3(~3, ~0x04, ~0)|ASI_RS2(~0),          "d,[1]", F_ALIAS, v9 }, /* st d,[rs1+%g0] */
-{ "stuw",      F3(3, 0x04, 1), F3(~3, ~0x04, ~1),                      "d,[1+i]", F_ALIAS, v9 },
-{ "stuw",      F3(3, 0x04, 1), F3(~3, ~0x04, ~1),                      "d,[i+1]", F_ALIAS, v9 },
-{ "stuw",      F3(3, 0x04, 1), F3(~3, ~0x04, ~1)|RS1_G0,               "d,[i]", F_ALIAS, v9 },
-{ "stuw",      F3(3, 0x04, 1), F3(~3, ~0x04, ~1)|SIMM13(~0),           "d,[1]", F_ALIAS, v9 }, /* st d,[rs1+0] */
-{ "stuw",      F3(3, 0x24, 0), F3(~3, ~0x24, ~0)|ASI(~0),              "g,[1+2]", F_ALIAS, v9 },
-{ "stuw",      F3(3, 0x24, 0), F3(~3, ~0x24, ~0)|ASI_RS2(~0),          "g,[1]", F_ALIAS, v9 }, /* st d[rs1+%g0] */
-{ "stuw",      F3(3, 0x24, 1), F3(~3, ~0x24, ~1),                      "g,[1+i]", F_ALIAS, v9 },
-{ "stuw",      F3(3, 0x24, 1), F3(~3, ~0x24, ~1),                      "g,[i+1]", F_ALIAS, v9 },
-{ "stuw",      F3(3, 0x24, 1), F3(~3, ~0x24, ~1)|RS1_G0,               "g,[i]", F_ALIAS, v9 },
-{ "stuw",      F3(3, 0x24, 1), F3(~3, ~0x24, ~1)|SIMM13(~0),           "g,[1]", F_ALIAS, v9 }, /* st d,[rs1+0] */
-{ "stuw",      F3(3, 0x34, 0), F3(~3, ~0x34, ~0)|ASI(~0),              "D,[1+2]", F_ALIAS, v9 },
-{ "stuw",      F3(3, 0x34, 0), F3(~3, ~0x34, ~0)|ASI_RS2(~0),          "D,[1]", F_ALIAS, v9 }, /* st d,[rs1+%g0] */
-{ "stuw",      F3(3, 0x34, 1), F3(~3, ~0x34, ~1),                      "D,[1+i]", F_ALIAS, v9 },
-{ "stuw",      F3(3, 0x34, 1), F3(~3, ~0x34, ~1),                      "D,[i+1]", F_ALIAS, v9 },
-{ "stuw",      F3(3, 0x34, 1), F3(~3, ~0x34, ~1)|RS1_G0,               "D,[i]", F_ALIAS, v9 },
-{ "stuw",      F3(3, 0x34, 1), F3(~3, ~0x34, ~1)|SIMM13(~0),           "D,[1]", F_ALIAS, v9 }, /* st d,[rs1+0] */
-{ "stuw",      F3(3, 0x35, 0), F3(~3, ~0x35, ~0)|ASI(~0),              "C,[1+2]", F_ALIAS, v9 },
-{ "stuw",      F3(3, 0x35, 0), F3(~3, ~0x35, ~0)|ASI_RS2(~0),          "C,[1]", F_ALIAS, v9 }, /* st d,[rs1+%g0] */
-{ "stuw",      F3(3, 0x35, 1), F3(~3, ~0x35, ~1),                      "C,[1+i]", F_ALIAS, v9 },
-{ "stuw",      F3(3, 0x35, 1), F3(~3, ~0x35, ~1),                      "C,[i+1]", F_ALIAS, v9 },
-{ "stuw",      F3(3, 0x35, 1), F3(~3, ~0x35, ~1)|RS1_G0,               "C,[i]", F_ALIAS, v9 },
-{ "stuw",      F3(3, 0x35, 1), F3(~3, ~0x35, ~1)|SIMM13(~0),           "C,[1]", F_ALIAS, v9 }, /* st d,[rs1+0] */
-{ "stuw",      F3(3, 0x25, 0), F3(~3, ~0x25, ~0)|RD_G0|ASI(~0),        "F,[1+2]", F_ALIAS, v9 },
-{ "stuw",      F3(3, 0x25, 0), F3(~3, ~0x25, ~0)|RD_G0|ASI_RS2(~0),    "F,[1]", F_ALIAS, v9 }, /* st d,[rs1+%g0] */
-{ "stuw",      F3(3, 0x25, 1), F3(~3, ~0x25, ~1)|RD_G0,                "F,[1+i]", F_ALIAS, v9 },
-{ "stuw",      F3(3, 0x25, 1), F3(~3, ~0x25, ~1)|RD_G0,                "F,[i+1]", F_ALIAS, v9 },
-{ "stuw",      F3(3, 0x25, 1), F3(~3, ~0x25, ~1)|RD_G0|RS1_G0, "F,[i]", F_ALIAS, v9 },
-{ "stuw",      F3(3, 0x25, 1), F3(~3, ~0x25, ~1)|SIMM13(~0),           "F,[1]", F_ALIAS, v9 }, /* st d,[rs1+0] */
-
-{ "stsw",      F3(3, 0x04, 0), F3(~3, ~0x04, ~0)|ASI(~0),              "d,[1+2]", F_ALIAS, v9 }, /* stsw === st */
-{ "stsw",      F3(3, 0x04, 0), F3(~3, ~0x04, ~0)|ASI_RS2(~0),          "d,[1]", F_ALIAS, v9 }, /* st d,[rs1+%g0] */
-{ "stsw",      F3(3, 0x04, 1), F3(~3, ~0x04, ~1),                      "d,[1+i]", F_ALIAS, v9 },
-{ "stsw",      F3(3, 0x04, 1), F3(~3, ~0x04, ~1),                      "d,[i+1]", F_ALIAS, v9 },
-{ "stsw",      F3(3, 0x04, 1), F3(~3, ~0x04, ~1)|RS1_G0,               "d,[i]", F_ALIAS, v9 },
-{ "stsw",      F3(3, 0x04, 1), F3(~3, ~0x04, ~1)|SIMM13(~0),           "d,[1]", F_ALIAS, v9 }, /* st d,[rs1+0] */
-{ "stsw",      F3(3, 0x24, 0), F3(~3, ~0x24, ~0)|ASI(~0),              "g,[1+2]", F_ALIAS, v9 },
-{ "stsw",      F3(3, 0x24, 0), F3(~3, ~0x24, ~0)|ASI_RS2(~0),          "g,[1]", F_ALIAS, v9 }, /* st d[rs1+%g0] */
-{ "stsw",      F3(3, 0x24, 1), F3(~3, ~0x24, ~1),                      "g,[1+i]", F_ALIAS, v9 },
-{ "stsw",      F3(3, 0x24, 1), F3(~3, ~0x24, ~1),                      "g,[i+1]", F_ALIAS, v9 },
-{ "stsw",      F3(3, 0x24, 1), F3(~3, ~0x24, ~1)|RS1_G0,               "g,[i]", F_ALIAS, v9 },
-{ "stsw",      F3(3, 0x24, 1), F3(~3, ~0x24, ~1)|SIMM13(~0),           "g,[1]", F_ALIAS, v9 }, /* st d,[rs1+0] */
-{ "stsw",      F3(3, 0x34, 0), F3(~3, ~0x34, ~0)|ASI(~0),              "D,[1+2]", F_ALIAS, v9 },
-{ "stsw",      F3(3, 0x34, 0), F3(~3, ~0x34, ~0)|ASI_RS2(~0),          "D,[1]", F_ALIAS, v9 }, /* st d,[rs1+%g0] */
-{ "stsw",      F3(3, 0x34, 1), F3(~3, ~0x34, ~1),                      "D,[1+i]", F_ALIAS, v9 },
-{ "stsw",      F3(3, 0x34, 1), F3(~3, ~0x34, ~1),                      "D,[i+1]", F_ALIAS, v9 },
-{ "stsw",      F3(3, 0x34, 1), F3(~3, ~0x34, ~1)|RS1_G0,               "D,[i]", F_ALIAS, v9 },
-{ "stsw",      F3(3, 0x34, 1), F3(~3, ~0x34, ~1)|SIMM13(~0),           "D,[1]", F_ALIAS, v9 }, /* st d,[rs1+0] */
-{ "stsw",      F3(3, 0x35, 0), F3(~3, ~0x35, ~0)|ASI(~0),              "C,[1+2]", F_ALIAS, v9 },
-{ "stsw",      F3(3, 0x35, 0), F3(~3, ~0x35, ~0)|ASI_RS2(~0),          "C,[1]", F_ALIAS, v9 }, /* st d,[rs1+%g0] */
-{ "stsw",      F3(3, 0x35, 1), F3(~3, ~0x35, ~1),                      "C,[1+i]", F_ALIAS, v9 },
-{ "stsw",      F3(3, 0x35, 1), F3(~3, ~0x35, ~1),                      "C,[i+1]", F_ALIAS, v9 },
-{ "stsw",      F3(3, 0x35, 1), F3(~3, ~0x35, ~1)|RS1_G0,               "C,[i]", F_ALIAS, v9 },
-{ "stsw",      F3(3, 0x35, 1), F3(~3, ~0x35, ~1)|SIMM13(~0),           "C,[1]", F_ALIAS, v9 }, /* st d,[rs1+0] */
-{ "stsw",      F3(3, 0x25, 0), F3(~3, ~0x25, ~0)|RD_G0|ASI(~0),        "F,[1+2]", F_ALIAS, v9 },
-{ "stsw",      F3(3, 0x25, 0), F3(~3, ~0x25, ~0)|RD_G0|ASI_RS2(~0),    "F,[1]", F_ALIAS, v9 }, /* st d,[rs1+%g0] */
-{ "stsw",      F3(3, 0x25, 1), F3(~3, ~0x25, ~1)|RD_G0,                "F,[1+i]", F_ALIAS, v9 },
-{ "stsw",      F3(3, 0x25, 1), F3(~3, ~0x25, ~1)|RD_G0,                "F,[i+1]", F_ALIAS, v9 },
-{ "stsw",      F3(3, 0x25, 1), F3(~3, ~0x25, ~1)|RD_G0|RS1_G0, "F,[i]", F_ALIAS, v9 },
-{ "stsw",      F3(3, 0x25, 1), F3(~3, ~0x25, ~1)|SIMM13(~0),           "F,[1]", F_ALIAS, v9 }, /* st d,[rs1+0] */
-
-{ "sta",       F3(3, 0x14, 0), F3(~3, ~0x14, ~0),              "d,[1+2]A", 0, v6 },
-{ "sta",       F3(3, 0x14, 0), F3(~3, ~0x14, ~0)|RS2(~0),      "d,[1]A", 0, v6 }, /* sta d,[rs1+%g0] */
-
-{ "stwa",      F3(3, 0x14, 0), F3(~3, ~0x14, ~0),              "d,[1+2]A", F_ALIAS, v9 },
-{ "stwa",      F3(3, 0x14, 0), F3(~3, ~0x14, ~0)|RS2(~0),      "d,[1]A", F_ALIAS, v9 }, /* sta d,[rs1+%g0] */
-
-{ "stswa",     F3(3, 0x14, 0), F3(~3, ~0x14, ~0),              "d,[1+2]A", F_ALIAS, v9 },
-{ "stswa",     F3(3, 0x14, 0), F3(~3, ~0x14, ~0)|RS2(~0),      "d,[1]A", F_ALIAS, v9 }, /* sta d,[rs1+%g0] */
-
-{ "stuwa",     F3(3, 0x14, 0), F3(~3, ~0x14, ~0),              "d,[1+2]A", F_ALIAS, v9 },
-{ "stuwa",     F3(3, 0x14, 0), F3(~3, ~0x14, ~0)|RS2(~0),      "d,[1]A", F_ALIAS, v9 }, /* sta d,[rs1+%g0] */
-
-{ "stb",       F3(3, 0x05, 0), F3(~3, ~0x05, ~0)|ASI(~0),      "d,[1+2]", 0, v6 },
-{ "stb",       F3(3, 0x05, 0), F3(~3, ~0x05, ~0)|ASI_RS2(~0),  "d,[1]", 0, v6 }, /* stb d,[rs1+%g0] */
-{ "stb",       F3(3, 0x05, 1), F3(~3, ~0x05, ~1),              "d,[1+i]", 0, v6 },
-{ "stb",       F3(3, 0x05, 1), F3(~3, ~0x05, ~1),              "d,[i+1]", 0, v6 },
-{ "stb",       F3(3, 0x05, 1), F3(~3, ~0x05, ~1)|RS1_G0,       "d,[i]", 0, v6 },
-{ "stb",       F3(3, 0x05, 1), F3(~3, ~0x05, ~1)|SIMM13(~0),   "d,[1]", 0, v6 }, /* stb d,[rs1+0] */
-
-{ "stub",      F3(3, 0x05, 0), F3(~3, ~0x05, ~0)|ASI(~0),      "d,[1+2]", F_ALIAS, v9 },
-{ "stub",      F3(3, 0x05, 0), F3(~3, ~0x05, ~0)|ASI_RS2(~0),  "d,[1]", F_ALIAS, v9 }, /* stb d,[rs1+%g0] */
-{ "stub",      F3(3, 0x05, 1), F3(~3, ~0x05, ~1),              "d,[1+i]", F_ALIAS, v9 },
-{ "stub",      F3(3, 0x05, 1), F3(~3, ~0x05, ~1),              "d,[i+1]", F_ALIAS, v9 },
-{ "stub",      F3(3, 0x05, 1), F3(~3, ~0x05, ~1)|RS1_G0,       "d,[i]", F_ALIAS, v9 },
-{ "stub",      F3(3, 0x05, 1), F3(~3, ~0x05, ~1)|SIMM13(~0),   "d,[1]", F_ALIAS, v9 }, /* stb d,[rs1+0] */
-
-{ "stsb",      F3(3, 0x05, 0), F3(~3, ~0x05, ~0)|ASI(~0),      "d,[1+2]", F_ALIAS, v9 },
-{ "stsb",      F3(3, 0x05, 0), F3(~3, ~0x05, ~0)|ASI_RS2(~0),  "d,[1]", F_ALIAS, v9 }, /* stb d,[rs1+%g0] */
-{ "stsb",      F3(3, 0x05, 1), F3(~3, ~0x05, ~1),              "d,[1+i]", F_ALIAS, v9 },
-{ "stsb",      F3(3, 0x05, 1), F3(~3, ~0x05, ~1),              "d,[i+1]", F_ALIAS, v9 },
-{ "stsb",      F3(3, 0x05, 1), F3(~3, ~0x05, ~1)|RS1_G0,       "d,[i]", F_ALIAS, v9 },
-{ "stsb",      F3(3, 0x05, 1), F3(~3, ~0x05, ~1)|SIMM13(~0),   "d,[1]", F_ALIAS, v9 }, /* stb d,[rs1+0] */
-
-{ "stba",      F3(3, 0x15, 0), F3(~3, ~0x15, ~0),              "d,[1+2]A", 0, v6 },
-{ "stba",      F3(3, 0x15, 0), F3(~3, ~0x15, ~0)|RS2(~0),      "d,[1]A", 0, v6 }, /* stba d,[rs1+%g0] */
-
-{ "stsba",     F3(3, 0x15, 0), F3(~3, ~0x15, ~0),              "d,[1+2]A", F_ALIAS, v9 },
-{ "stsba",     F3(3, 0x15, 0), F3(~3, ~0x15, ~0)|RS2(~0),      "d,[1]A", F_ALIAS, v9 }, /* stba d,[rs1+%g0] */
-
-{ "stuba",     F3(3, 0x15, 0), F3(~3, ~0x15, ~0),              "d,[1+2]A", F_ALIAS, v9 },
-{ "stuba",     F3(3, 0x15, 0), F3(~3, ~0x15, ~0)|RS2(~0),      "d,[1]A", F_ALIAS, v9 }, /* stba d,[rs1+%g0] */
-
-{ "std",       F3(3, 0x07, 0), F3(~3, ~0x07, ~0)|ASI(~0),      "d,[1+2]", 0, v6 },
-{ "std",       F3(3, 0x07, 0), F3(~3, ~0x07, ~0)|ASI_RS2(~0),  "d,[1]", 0, v6 }, /* std d,[rs1+%g0] */
-{ "std",       F3(3, 0x07, 1), F3(~3, ~0x07, ~1),              "d,[1+i]", 0, v6 },
-{ "std",       F3(3, 0x07, 1), F3(~3, ~0x07, ~1),              "d,[i+1]", 0, v6 },
-{ "std",       F3(3, 0x07, 1), F3(~3, ~0x07, ~1)|RS1_G0,       "d,[i]", 0, v6 },
-{ "std",       F3(3, 0x07, 1), F3(~3, ~0x07, ~1)|SIMM13(~0),   "d,[1]", 0, v6 }, /* std d,[rs1+0] */
-{ "std",       F3(3, 0x26, 0), F3(~3, ~0x26, ~0)|ASI(~0),      "q,[1+2]", 0, v6 },
-{ "std",       F3(3, 0x26, 0), F3(~3, ~0x26, ~0)|ASI_RS2(~0),  "q,[1]", 0, v6 }, /* std d,[rs1+%g0] */
-{ "std",       F3(3, 0x26, 1), F3(~3, ~0x26, ~1),              "q,[1+i]", 0, v6 },
-{ "std",       F3(3, 0x26, 1), F3(~3, ~0x26, ~1),              "q,[i+1]", 0, v6 },
-{ "std",       F3(3, 0x26, 1), F3(~3, ~0x26, ~1)|RS1_G0,       "q,[i]", 0, v6 },
-{ "std",       F3(3, 0x26, 1), F3(~3, ~0x26, ~1)|SIMM13(~0),   "q,[1]", 0, v6 }, /* std d,[rs1+0] */
-{ "std",       F3(3, 0x27, 0), F3(~3, ~0x27, ~0)|ASI(~0),      "g,[1+2]", 0, v6 },
-{ "std",       F3(3, 0x27, 0), F3(~3, ~0x27, ~0)|ASI_RS2(~0),  "g,[1]", 0, v6 }, /* std d,[rs1+%g0] */
-{ "std",       F3(3, 0x27, 1), F3(~3, ~0x27, ~1),              "g,[1+i]", 0, v6 },
-{ "std",       F3(3, 0x27, 1), F3(~3, ~0x27, ~1),              "g,[i+1]", 0, v6 },
-{ "std",       F3(3, 0x27, 1), F3(~3, ~0x27, ~1)|RS1_G0,       "g,[i]", 0, v6 },
-{ "std",       F3(3, 0x27, 1), F3(~3, ~0x27, ~1)|SIMM13(~0),   "g,[1]", 0, v6 }, /* std d,[rs1+0] */
-{ "std",       F3(3, 0x36, 0), F3(~3, ~0x36, ~0)|ASI(~0),      "Q,[1+2]", 0, v6 },
-{ "std",       F3(3, 0x36, 0), F3(~3, ~0x36, ~0)|ASI_RS2(~0),  "Q,[1]", 0, v6 }, /* std d,[rs1+%g0] */
-{ "std",       F3(3, 0x36, 1), F3(~3, ~0x36, ~1),              "Q,[1+i]", 0, v6 },
-{ "std",       F3(3, 0x36, 1), F3(~3, ~0x36, ~1),              "Q,[i+1]", 0, v6 },
-{ "std",       F3(3, 0x36, 1), F3(~3, ~0x36, ~1)|RS1_G0,       "Q,[i]", 0, v6 },
-{ "std",       F3(3, 0x36, 1), F3(~3, ~0x36, ~1)|SIMM13(~0),   "Q,[1]", 0, v6 }, /* std d,[rs1+0] */
-{ "std",       F3(3, 0x37, 0), F3(~3, ~0x37, ~0)|ASI(~0),      "D,[1+2]", 0, v6 },
-{ "std",       F3(3, 0x37, 0), F3(~3, ~0x37, ~0)|ASI_RS2(~0),  "D,[1]", 0, v6 }, /* std d,[rs1+%g0] */
-{ "std",       F3(3, 0x37, 1), F3(~3, ~0x37, ~1),              "D,[1+i]", 0, v6 },
-{ "std",       F3(3, 0x37, 1), F3(~3, ~0x37, ~1),              "D,[i+1]", 0, v6 },
-{ "std",       F3(3, 0x37, 1), F3(~3, ~0x37, ~1)|RS1_G0,       "D,[i]", 0, v6 },
-{ "std",       F3(3, 0x37, 1), F3(~3, ~0x37, ~1)|SIMM13(~0),   "D,[1]", 0, v6 }, /* std d,[rs1+0] */
-
-{ "stda",      F3(3, 0x17, 0), F3(~3, ~0x17, ~0),              "d,[1+2]A", 0, v6 },
-{ "stda",      F3(3, 0x17, 0), F3(~3, ~0x17, ~0)|RS2(~0),      "d,[1]A", 0, v6 }, /* stda d,[rs1+%g0] */
-
-{ "sth",       F3(3, 0x06, 0), F3(~3, ~0x06, ~0)|ASI(~0),      "d,[1+2]", 0, v6 },
-{ "sth",       F3(3, 0x06, 0), F3(~3, ~0x06, ~0)|ASI_RS2(~0),  "d,[1]", 0, v6 }, /* sth d,[rs1+%g0] */
-{ "sth",       F3(3, 0x06, 1), F3(~3, ~0x06, ~1),              "d,[1+i]", 0, v6 },
-{ "sth",       F3(3, 0x06, 1), F3(~3, ~0x06, ~1),              "d,[i+1]", 0, v6 },
-{ "sth",       F3(3, 0x06, 1), F3(~3, ~0x06, ~1)|RS1_G0,       "d,[i]", 0, v6 },
-{ "sth",       F3(3, 0x06, 1), F3(~3, ~0x06, ~1)|SIMM13(~0),   "d,[1]", 0, v6 }, /* sth d,[+] */
-
-{ "stsh",      F3(3, 0x06, 0), F3(~3, ~0x06, ~0)|ASI(~0),      "d,[1+2]", F_ALIAS, v9 },
-{ "stsh",      F3(3, 0x06, 0), F3(~3, ~0x06, ~0)|ASI_RS2(~0),  "d,[1]", F_ALIAS, v9 }, /* sth d,[rs1+%g0] */
-{ "stsh",      F3(3, 0x06, 1), F3(~3, ~0x06, ~1),              "d,[1+i]", F_ALIAS, v9 },
-{ "stsh",      F3(3, 0x06, 1), F3(~3, ~0x06, ~1),              "d,[i+1]", F_ALIAS, v9 },
-{ "stsh",      F3(3, 0x06, 1), F3(~3, ~0x06, ~1)|RS1_G0,       "d,[i]", F_ALIAS, v9 },
-{ "stsh",      F3(3, 0x06, 1), F3(~3, ~0x06, ~1)|SIMM13(~0),   "d,[1]", F_ALIAS, v9 }, /* sth d,[rs1+0] */
-
-{ "stuh",      F3(3, 0x06, 0), F3(~3, ~0x06, ~0)|ASI(~0),      "d,[1+2]", F_ALIAS, v9 },
-{ "stuh",      F3(3, 0x06, 0), F3(~3, ~0x06, ~0)|ASI_RS2(~0),  "d,[1]", F_ALIAS, v9 }, /* sth d,[rs1+%g0] */
-{ "stuh",      F3(3, 0x06, 1), F3(~3, ~0x06, ~1),              "d,[1+i]", F_ALIAS, v9 },
-{ "stuh",      F3(3, 0x06, 1), F3(~3, ~0x06, ~1),              "d,[i+1]", F_ALIAS, v9 },
-{ "stuh",      F3(3, 0x06, 1), F3(~3, ~0x06, ~1)|RS1_G0,       "d,[i]", F_ALIAS, v9 },
-{ "stuh",      F3(3, 0x06, 1), F3(~3, ~0x06, ~1)|SIMM13(~0),   "d,[1]", F_ALIAS, v9 }, /* sth d,[rs1+0] */
-
-{ "stha",      F3(3, 0x16, 0), F3(~3, ~0x16, ~0),              "d,[1+2]A", 0, v6 },
-{ "stha",      F3(3, 0x16, 0), F3(~3, ~0x16, ~0)|RS2(~0),      "d,[1]A", 0, v6 }, /* stha ,[+%] */
-
-{ "stsha",     F3(3, 0x16, 0), F3(~3, ~0x16, ~0),              "d,[1+2]A", F_ALIAS, v9 },
-{ "stsha",     F3(3, 0x16, 0), F3(~3, ~0x16, ~0)|RS2(~0),      "d,[1]A", F_ALIAS, v9 }, /* stha d,[rs1+%g0] */
-
-{ "stuha",     F3(3, 0x16, 0), F3(~3, ~0x16, ~0),              "d,[1+2]A", F_ALIAS, v9 },
-{ "stuha",     F3(3, 0x16, 0), F3(~3, ~0x16, ~0)|RS2(~0),      "d,[1]A", F_ALIAS, v9 }, /* stha d,[rs1+%g0] */
-
-{ "stx",       F3(3, 0x0e, 0), F3(~3, ~0x0e, ~0)|ASI(~0),              "d,[1+2]", 0, v9 },
-{ "stx",       F3(3, 0x0e, 0), F3(~3, ~0x0e, ~0)|ASI_RS2(~0),          "d,[1]", 0, v9 }, /* stx d,[rs1+%g0] */
-{ "stx",       F3(3, 0x0e, 1), F3(~3, ~0x0e, ~1),                      "d,[1+i]", 0, v9 },
-{ "stx",       F3(3, 0x0e, 1), F3(~3, ~0x0e, ~1),                      "d,[i+1]", 0, v9 },
-{ "stx",       F3(3, 0x0e, 1), F3(~3, ~0x0e, ~1)|RS1_G0,               "d,[i]", 0, v9 },
-{ "stx",       F3(3, 0x0e, 1), F3(~3, ~0x0e, ~1)|SIMM13(~0),           "d,[1]", 0, v9 }, /* stx d,[rs1+0] */
-{ "stx",       F3(3, 0x2d, 0), F3(~3, ~0x2d, ~0)|RD_G0|ASI(~0),        "F,[1+2]", F_ALIAS, v9 },
-{ "stx",       F3(3, 0x2d, 0), F3(~3, ~0x2d, ~0)|RD_G0|ASI_RS2(~0),    "F,[1]", F_ALIAS, v9 }, /* st d,[rs1+%g0] */
-{ "stx",       F3(3, 0x2d, 1), F3(~3, ~0x2d, ~1)|RD_G0,                "F,[1+i]", F_ALIAS, v9 },
-{ "stx",       F3(3, 0x2d, 1), F3(~3, ~0x2d, ~1)|RD_G0,                "F,[i+1]", F_ALIAS, v9 },
-{ "stx",       F3(3, 0x2d, 1), F3(~3, ~0x2d, ~1)|RD_G0|RS1_G0,         "F,[i]", F_ALIAS, v9 },
-{ "stx",       F3(3, 0x2d, 1), F3(~3, ~0x2d, ~1)|SIMM13(~0),           "F,[1]", F_ALIAS, v9 }, /* st d,[rs1+0] */
-
-{ "stxa",      F3(3, 0x1e, 0), F3(~3, ~0x1e, ~0),              "d,[1+2]A", 0, v9 },
-{ "stxa",      F3(3, 0x1e, 0), F3(~3, ~0x1e, ~0)|RS2(~0),      "d,[1]A", 0, v9 }, /* stha d,[rs1+%g0] */
-
-{ "swap",      F3(3, 0x0f, 0), F3(~3, ~0x0f, ~0)|ASI(~0),      "[1+2],d", 0, v7 },
-{ "swap",      F3(3, 0x0f, 0), F3(~3, ~0x0f, ~0)|ASI_RS2(~0),  "[1],d", 0, v7 }, /* swap [rs1+%g0],d */
-{ "swap",      F3(3, 0x0f, 1), F3(~3, ~0x0f, ~1),              "[1+i],d", 0, v7 },
-{ "swap",      F3(3, 0x0f, 1), F3(~3, ~0x0f, ~1),              "[i+1],d", 0, v7 },
-{ "swap",      F3(3, 0x0f, 1), F3(~3, ~0x0f, ~1)|RS1_G0,       "[i],d", 0, v7 },
-{ "swap",      F3(3, 0x0f, 1), F3(~3, ~0x0f, ~1)|SIMM13(~0),   "[1],d", 0, v7 }, /* swap [rs1+0],d */
-
-{ "swapa",     F3(3, 0x1f, 0), F3(~3, ~0x1f, ~0),              "[1+2]A,d", 0, v7 },
-{ "swapa",     F3(3, 0x1f, 0), F3(~3, ~0x1f, ~0)|RS2(~0),      "[1]A,d", 0, v7 }, /* swapa [rs1+%g0],d */
-
-{ "restore",   F3(2, 0x3d, 0), F3(~2, ~0x3d, ~0)|ASI(~0),                      "1,2,d", 0, v6 },
-{ "restore",   F3(2, 0x3d, 0), F3(~2, ~0x3d, ~0)|RD_G0|RS1_G0|ASI_RS2(~0),     "", 0, v6 }, /* restore %g0,%g0,%g0 */
-{ "restore",   F3(2, 0x3d, 1), F3(~2, ~0x3d, ~1),                              "1,i,d", 0, v6 },
-{ "restore",   F3(2, 0x3d, 1), F3(~2, ~0x3d, ~1)|RD_G0|RS1_G0|SIMM13(~0),      "", 0, v6 }, /* restore %g0,0,%g0 */
-
-{ "rett",      F3(2, 0x39, 0), F3(~2, ~0x39, ~0)|RD_G0|ASI(~0),        "1+2", F_DELAYED, v6 }, /* rett rs1+rs2 */
-{ "rett",      F3(2, 0x39, 0), F3(~2, ~0x39, ~0)|RD_G0|ASI_RS2(~0),    "1", F_DELAYED, v6 },   /* rett rs1,%g0 */
-{ "rett",      F3(2, 0x39, 1), F3(~2, ~0x39, ~1)|RD_G0,        "1+i", F_DELAYED, v6 }, /* rett rs1+X */
-{ "rett",      F3(2, 0x39, 1), F3(~2, ~0x39, ~1)|RD_G0,        "i+1", F_DELAYED, v6 }, /* rett X+rs1 */
-{ "rett",      F3(2, 0x39, 1), F3(~2, ~0x39, ~1)|RD_G0|RS1_G0,"i", F_DELAYED, v6 }, /* rett X+rs1 */
-{ "rett",      F3(2, 0x39, 1), F3(~2, ~0x39, ~1)|RD_G0|RS1_G0, "i", F_DELAYED, v6 },   /* rett X */
-{ "rett",      F3(2, 0x39, 1), F3(~2, ~0x39, ~1)|RD_G0|SIMM13(~0),     "1", F_DELAYED, v6 },   /* rett rs1+0 */
-
-{ "save",      F3(2, 0x3c, 0), F3(~2, ~0x3c, ~0)|ASI(~0),      "1,2,d", 0, v6 },
-{ "save",      F3(2, 0x3c, 1), F3(~2, ~0x3c, ~1),              "1,i,d", 0, v6 },
-{ "save",      0x81e00000,     ~0x81e00000,    "", F_ALIAS, v6 },
-
-{ "ret",  F3(2, 0x38, 1)|RS1(0x1f)|SIMM13(8), F3(~2, ~0x38, ~1)|SIMM13(~8),           "", F_DELAYED, v6 }, /* jmpl %i7+8,%g0 */
-{ "retl", F3(2, 0x38, 1)|RS1(0x0f)|SIMM13(8), F3(~2, ~0x38, ~1)|RS1(~0x0f)|SIMM13(~8), "", F_DELAYED, v6 }, /* jmpl %o7+8,%g0 */
-
-{ "jmpl",      F3(2, 0x38, 0), F3(~2, ~0x38, ~0)|ASI(~0),      "1+2,d", F_DELAYED, v6 },
-{ "jmpl",      F3(2, 0x38, 0), F3(~2, ~0x38, ~0)|ASI_RS2(~0),  "1,d", F_DELAYED, v6 }, /* jmpl rs1+%g0,d */
-{ "jmpl",      F3(2, 0x38, 1), F3(~2, ~0x38, ~1)|SIMM13(~0),   "1,d", F_DELAYED, v6 }, /* jmpl rs1+0,d */
-{ "jmpl",      F3(2, 0x38, 1), F3(~2, ~0x38, ~1)|RS1_G0,       "i,d", F_DELAYED, v6 }, /* jmpl %g0+i,d */
-{ "jmpl",      F3(2, 0x38, 1), F3(~2, ~0x38, ~1),              "1+i,d", F_DELAYED, v6 },
-{ "jmpl",      F3(2, 0x38, 1), F3(~2, ~0x38, ~1),              "i+1,d", F_DELAYED, v6 },
-
-{ "done",      F3(2, 0x3e, 1)|RD(0), F3(~2, ~0x3e, ~1)|RD(~0)|RS1_G0|SIMM13(~0),       "", 0, v9 },
-{ "retry",     F3(2, 0x3e, 1)|RD(1), F3(~2, ~0x3e, ~1)|RD(~1)|RS1_G0|SIMM13(~0),       "", 0, v9 },
-{ "saved",     F3(2, 0x31, 1)|RD(0), F3(~2, ~0x31, ~1)|RD(~0)|RS1_G0|SIMM13(~0),       "", 0, v9 },
-{ "restored",  F3(2, 0x31, 1)|RD(1), F3(~2, ~0x31, ~1)|RD(~1)|RS1_G0|SIMM13(~0),       "", 0, v9 },
-{ "sigm",      F3(2, 0x30, 0)|RD(0xf), F3(~2, ~0x30, ~0)|RD(~0xf)|RS1_G0|SIMM13(~0),   "", 0, v9 },
-
-{ "flush",     F3(2, 0x3b, 0), F3(~2, ~0x3b, ~0)|ASI(~0),      "1+2", F_ALIAS, v9 },
-{ "flush",     F3(2, 0x3b, 0), F3(~2, ~0x3b, ~0)|ASI_RS2(~0),  "1", 0, v9 }, /* flush rs1+%g0 */
-{ "flush",     F3(2, 0x3b, 1), F3(~2, ~0x3b, ~1)|SIMM13(~0),   "1", 0, v9 }, /* flush rs1+0 */
-{ "flush",     F3(2, 0x3b, 1), F3(~2, ~0x3b, ~1)|RS1_G0,       "i", F_ALIAS, v9 }, /* flush %g0+i */
-{ "flush",     F3(2, 0x3b, 1), F3(~2, ~0x3b, ~1),              "1+i", F_ALIAS, v9 },
-{ "flush",     F3(2, 0x3b, 1), F3(~2, ~0x3b, ~1),              "i+1", F_ALIAS, v9 },
-
-{ "return",    F3(2, 0x39, 0), F3(~2, ~0x39, ~0)|ASI(~0),      "1+2", 0, v9 },
-{ "return",    F3(2, 0x39, 0), F3(~2, ~0x39, ~0)|ASI_RS2(~0),  "1", 0, v9 }, /* return rs1+%g0 */
-{ "return",    F3(2, 0x39, 1), F3(~2, ~0x39, ~1)|SIMM13(~0),   "1", 0, v9 }, /* return rs1+0 */
-{ "return",    F3(2, 0x39, 1), F3(~2, ~0x39, ~1)|RS1_G0,       "i", 0, v9 }, /* return %g0+i */
-{ "return",    F3(2, 0x39, 1), F3(~2, ~0x39, ~1),              "1+i", 0, v9 },
-{ "return",    F3(2, 0x39, 1), F3(~2, ~0x39, ~1),              "i+1", 0, v9 },
-
-{ "flushw",    F3(2, 0x2b, 0), F3(~2, ~0x2b, ~0)|RD_G0|RS1_G0|ASI_RS2(~0),     "", 0, v9 },
-
-{ "membar",    F3(2, 0x28, 1)|RS1(0xf), F3(~2, ~0x28, ~1)|RD_G0|RS1(~0xf)|ASI(~0), "K", 0, v9 },
-{ "stbar",     F3(2, 0x28, 0)|RS1(0xf), F3(~2, ~0x28, ~0)|RD_G0|RS1(~0xf)|SIMM13(~0),  "", 0, v9 }, /* maybe v8?  */
-
-{ "prefetch",  F3(3, 0x2d, 0), F3(~3, ~0x2d, ~0),              "[1+2],*", 0, v9 },
-{ "prefetch",  F3(3, 0x2d, 0), F3(~3, ~0x2d, ~0)|RS2_G0,       "[1],*", 0, v9 }, /* prefetch [rs1+%g0],prefetch_fcn */
-{ "prefetch",  F3(3, 0x2d, 1), F3(~3, ~0x2d, ~1),              "[1+i],*", 0, v9 },
-{ "prefetch",  F3(3, 0x2d, 1), F3(~3, ~0x2d, ~1),              "[i+1],*", 0, v9 },
-{ "prefetch",  F3(3, 0x2d, 1), F3(~3, ~0x2d, ~1)|RS1_G0,       "[i],*", 0, v9 },
-{ "prefetch",  F3(3, 0x2d, 1), F3(~3, ~0x2d, ~1)|SIMM13(~0),   "[1],*", 0, v9 }, /* prefetch [rs1+0],prefetch_fcn */
-{ "prefetcha", F3(3, 0x3d, 0), F3(~3, ~0x3d, ~0),              "[1+2]A,*", 0, v9 },
-{ "prefetcha", F3(3, 0x3d, 0), F3(~3, ~0x3d, ~0)|RS2_G0,       "[1]A,*", 0, v9 }, /* prefetcha [rs1+%g0],prefetch_fcn */
-
- /* The 1<<12 is a long story.  It is necessary.  For more info, please contact rich@cygnus.com */
-{ "sll",       F3(2, 0x25, 0), F3(~2, ~0x25, ~0)|(1<<12)|ASI(~0),      "1,2,d", 0, v6 },
-{ "sll",       F3(2, 0x25, 1), F3(~2, ~0x25, ~1)|(1<<12),              "1,i,d", 0, v6 },
-{ "sra",       F3(2, 0x27, 0), F3(~2, ~0x27, ~0)|(1<<12)|ASI(~0),      "1,2,d", 0, v6 },
-{ "sra",       F3(2, 0x27, 1), F3(~2, ~0x27, ~1)|(1<<12),              "1,i,d", 0, v6 },
-{ "srl",       F3(2, 0x26, 0), F3(~2, ~0x26, ~0)|(1<<12)|ASI(~0),      "1,2,d", 0, v6 },
-{ "srl",       F3(2, 0x26, 1), F3(~2, ~0x26, ~1)|(1<<12),              "1,i,d", 0, v6 },
-
-{ "sllw",      F3(2, 0x25, 0), F3(~2, ~0x25, ~0)|(1<<12)|ASI(~0),      "1,2,d", F_ALIAS, v9 }, /* sllw === sll */
-{ "sllw",      F3(2, 0x25, 1), F3(~2, ~0x25, ~1)|(1<<12),              "1,i,d", F_ALIAS, v9 },
-{ "sraw",      F3(2, 0x27, 0), F3(~2, ~0x27, ~0)|(1<<12)|ASI(~0),      "1,2,d", F_ALIAS, v9 }, /* sraw === sra */
-{ "sraw",      F3(2, 0x27, 1), F3(~2, ~0x27, ~1)|(1<<12),              "1,i,d", F_ALIAS, v9 },
-{ "srlw",      F3(2, 0x26, 0), F3(~2, ~0x26, ~0)|(1<<12)|ASI(~0),      "1,2,d", F_ALIAS, v9 }, /* srlw === srl */
-{ "srlw",      F3(2, 0x26, 1), F3(~2, ~0x26, ~1)|(1<<12),              "1,i,d", F_ALIAS, v9 },
-
-{ "sllx",      F3(2, 0x25, 0)|(1<<12), F3(~2, ~0x25, ~0)|(ASI(~0)^(1<<12)),    "1,2,d", 0, v9 },
-{ "sllx",      F3(2, 0x25, 1)|(1<<12), F3(~2, ~0x25, ~1),              "1,i,d", 0, v9 },
-{ "srax",      F3(2, 0x27, 0)|(1<<12), F3(~2, ~0x27, ~0)|(ASI(~0)^(1<<12)),    "1,2,d", 0, v9 },
-{ "srax",      F3(2, 0x27, 1)|(1<<12), F3(~2, ~0x27, ~1),              "1,i,d", 0, v9 },
-{ "srlx",      F3(2, 0x26, 0)|(1<<12), F3(~2, ~0x26, ~0)|(ASI(~0)^(1<<12)),    "1,2,d", 0, v9 },
-{ "srlx",      F3(2, 0x26, 1)|(1<<12), F3(~2, ~0x26, ~1),              "1,i,d", 0, v9 },
-
-{ "mulscc",    F3(2, 0x24, 0), F3(~2, ~0x24, ~0)|ASI(~0),      "1,2,d", 0, v6 },
-{ "mulscc",    F3(2, 0x24, 1), F3(~2, ~0x24, ~1),              "1,i,d", 0, v6 },
-
-{ "divscc",    F3(2, 0x1d, 0), F3(~2, ~0x1d, ~0)|ASI(~0),      "1,2,d", 0, sparclite },
-{ "divscc",    F3(2, 0x1d, 1), F3(~2, ~0x1d, ~1),              "1,i,d", 0, sparclite },
-
-{ "scan",      F3(2, 0x2c, 0), F3(~2, ~0x2c, ~0)|ASI(~0),      "1,2,d", 0, sparclite },
-{ "scan",      F3(2, 0x2c, 1), F3(~2, ~0x2c, ~1),              "1,i,d", 0, sparclite },
-
-{ "clr",       F3(2, 0x02, 0), F3(~2, ~0x02, ~0)|RD_G0|RS1_G0|ASI_RS2(~0),     "d", F_ALIAS, v6 }, /* or %g0,%g0,d */
-{ "clr",       F3(2, 0x02, 1), F3(~2, ~0x02, ~1)|RS1_G0|SIMM13(~0),            "d", F_ALIAS, v6 }, /* or %g0,0,d       */
-{ "clr",       F3(3, 0x04, 0), F3(~3, ~0x04, ~0)|RD_G0|ASI(~0),                "[1+2]", F_ALIAS, v6 },
-{ "clr",       F3(3, 0x04, 0), F3(~3, ~0x04, ~0)|RD_G0|ASI_RS2(~0),            "[1]", F_ALIAS, v6 }, /* st %g0,[rs1+%g0] */
-{ "clr",       F3(3, 0x04, 1), F3(~3, ~0x04, ~1)|RD_G0,                        "[1+i]", F_ALIAS, v6 },
-{ "clr",       F3(3, 0x04, 1), F3(~3, ~0x04, ~1)|RD_G0,                        "[i+1]", F_ALIAS, v6 },
-{ "clr",       F3(3, 0x04, 1), F3(~3, ~0x04, ~1)|RD_G0|RS1_G0,         "[i]", F_ALIAS, v6 },
-{ "clr",       F3(3, 0x04, 1), F3(~3, ~0x04, ~1)|RD_G0|SIMM13(~0),             "[1]", F_ALIAS, v6 }, /* st %g0,[rs1+0] */
-
-{ "clrb",      F3(3, 0x05, 0), F3(~3, ~0x05, ~0)|RD_G0|ASI(~0),        "[1+2]", F_ALIAS, v6 },
-{ "clrb",      F3(3, 0x05, 0), F3(~3, ~0x05, ~0)|RD_G0|ASI_RS2(~0),    "[1]", F_ALIAS, v6 }, /* stb %g0,[rs1+%g0] */
-{ "clrb",      F3(3, 0x05, 1), F3(~3, ~0x05, ~1)|RD_G0,                "[1+i]", F_ALIAS, v6 },
-{ "clrb",      F3(3, 0x05, 1), F3(~3, ~0x05, ~1)|RD_G0,                "[i+1]", F_ALIAS, v6 },
-{ "clrb",      F3(3, 0x05, 1), F3(~3, ~0x05, ~1)|RD_G0|RS1_G0, "[i]", F_ALIAS, v6 },
-
-{ "clrh",      F3(3, 0x06, 0), F3(~3, ~0x06, ~0)|RD_G0|ASI(~0),        "[1+2]", F_ALIAS, v6 },
-{ "clrh",      F3(3, 0x06, 0), F3(~3, ~0x06, ~0)|RD_G0|ASI_RS2(~0),    "[1]", F_ALIAS, v6 }, /* sth %g0,[rs1+%g0] */
-{ "clrh",      F3(3, 0x06, 1), F3(~3, ~0x06, ~1)|RD_G0,                "[1+i]", F_ALIAS, v6 },
-{ "clrh",      F3(3, 0x06, 1), F3(~3, ~0x06, ~1)|RD_G0,                "[i+1]", F_ALIAS, v6 },
-{ "clrh",      F3(3, 0x06, 1), F3(~3, ~0x06, ~1)|RD_G0|RS1_G0, "[i]", F_ALIAS, v6 },
-
-{ "orcc",      F3(2, 0x12, 0), F3(~2, ~0x12, ~0)|ASI(~0),      "1,2,d", 0, v6 },
-{ "orcc",      F3(2, 0x12, 1), F3(~2, ~0x12, ~1),              "1,i,d", 0, v6 },
-{ "orcc",      F3(2, 0x12, 1), F3(~2, ~0x12, ~1),              "i,1,d", 0, v6 },
-
-{ "orncc",     F3(2, 0x16, 0), F3(~2, ~0x16, ~0)|ASI(~0),      "1,2,d", 0, v6 },
-{ "orncc",     F3(2, 0x16, 1), F3(~2, ~0x16, ~1),              "1,i,d", 0, v6 },
-{ "orncc",     F3(2, 0x16, 1), F3(~2, ~0x16, ~1),              "i,1,d", 0, v6 },
-
-{ "orn",       F3(2, 0x06, 0), F3(~2, ~0x06, ~0)|ASI(~0),      "1,2,d", 0, v6 },
-{ "orn",       F3(2, 0x06, 1), F3(~2, ~0x06, ~1),              "1,i,d", 0, v6 },
-{ "orn",       F3(2, 0x06, 1), F3(~2, ~0x06, ~1),              "i,1,d", 0, v6 },
-
-{ "tst",       F3(2, 0x12, 0), F3(~2, ~0x12, ~0)|RD_G0|ASI_RS2(~0),    "1", 0, v6 }, /* orcc rs1, %g0, %g0 */
-{ "tst",       F3(2, 0x12, 0), F3(~2, ~0x12, ~0)|RD_G0|RS1_G0|ASI(~0), "2", 0, v6 }, /* orcc %g0, rs2, %g0 */
-{ "tst",       F3(2, 0x12, 1), F3(~2, ~0x12, ~1)|RD_G0|SIMM13(~0),     "1", 0, v6 }, /* orcc rs1, 0, %g0 */
-
-{ "wr",        F3(2, 0x30, 0),         F3(~2, ~0x30, ~0)|ASI(~0),              "1,2,m", 0, v8 }, /* wr r,r,%asrX */
-{ "wr",        F3(2, 0x30, 0),         F3(~2, ~0x30, ~0)|RD_G0|ASI(~0),        "1,2,y", 0, v6 }, /* wr r,r,%y */
-{ "wr",        F3(2, 0x30, 1),         F3(~2, ~0x30, ~1),                      "1,i,m", 0, v8 }, /* wr r,i,%asrX */
-{ "wr",        F3(2, 0x30, 1),         F3(~2, ~0x30, ~1)|RD_G0,                "1,i,y", 0, v6 }, /* wr r,i,%y */
-{ "wr",        F3(2, 0x31, 0),         F3(~2, ~0x31, ~0)|RD_G0|ASI(~0),        "1,2,p", 0, v6 }, /* wr r,r,%psr */
-{ "wr",        F3(2, 0x31, 1),         F3(~2, ~0x31, ~1)|RD_G0,                "1,i,p", 0, v6 }, /* wr r,i,%psr */
-{ "wr",        F3(2, 0x32, 0),         F3(~2, ~0x32, ~0)|RD_G0|ASI(~0),        "1,2,w", 0, v6 }, /* wr r,r,%wim */
-{ "wr",        F3(2, 0x32, 1),         F3(~2, ~0x32, ~1)|RD_G0,                "1,i,w", 0, v6 }, /* wr r,i,%wim */
-{ "wr",        F3(2, 0x33, 0),         F3(~2, ~0x33, ~0)|RD_G0|ASI(~0),        "1,2,t", 0, v6 }, /* wr r,r,%tbr */
-{ "wr",        F3(2, 0x33, 0),         F3(~2, ~0x33, ~0)|RD_G0|ASI(~0),        "1,2,s", 0, v9 }, /* wr r,r,%usr */
-{ "wr",        F3(2, 0x33, 0),         F3(~2, ~0x33, ~0)|RD_G0|ASI(~0),        "1,2,o", 0, v9 }, /* wr r,r,%asi */
-{ "wr",        F3(2, 0x33, 1),         F3(~2, ~0x33, ~1)|RD_G0,                "1,i,t", 0, v6 }, /* wr r,i,%tbr */
-{ "wr",        F3(2, 0x33, 1),         F3(~2, ~0x33, ~1)|RD_G0,                "1,i,s", 0, v9 }, /* wr r,i,%usr */
-{ "wr",        F3(2, 0x33, 1),         F3(~2, ~0x33, ~1)|RD_G0,                "1,i,o", 0, v9 }, /* wr r,i,%asi */
-
-{ "wr", F3(2, 0x30, 0)|RD(0), F3(~2, ~0x30, ~0)|RD(~0)|ASI(~0), "1,2,y", 0, v9 },
-{ "wr", F3(2, 0x30, 1)|RD(0), F3(~2, ~0x30, ~1)|RD(~0),                "1,i,y", 0, v9 },
-{ "wr", F3(2, 0x30, 0)|RD(1), F3(~2, ~0x30, ~0)|RD(~1)|ASI(~0), "1,2,E", 0, v9 },
-{ "wr", F3(2, 0x30, 1)|RD(1), F3(~2, ~0x30, ~1)|RD(~1),                "1,i,E", 0, v9 },
-{ "wr", F3(2, 0x30, 0)|RD(3), F3(~2, ~0x30, ~0)|RD(~3)|ASI(~0), "1,2,W", 0, v9 },
-{ "wr", F3(2, 0x30, 1)|RD(3), F3(~2, ~0x30, ~1)|RD(~3),                "1,i,W", 0, v9 },
-{ "wr", F3(2, 0x30, 0)|RD(4), F3(~2, ~0x30, ~0)|RD(~4)|ASI(~0), "1,2,p", 0, v9 },
-{ "wr", F3(2, 0x30, 1)|RD(4), F3(~2, ~0x30, ~1)|RD(~4),                "1,i,p", 0, v9 },
-{ "wr", F3(2, 0x30, 0)|RD(5), F3(~2, ~0x30, ~0)|RD(~5)|ASI(~0), "1,2,w", 0, v9 },
-{ "wr", F3(2, 0x30, 1)|RD(5), F3(~2, ~0x30, ~1)|RD(~5),                "1,i,w", 0, v9 },
-
-{ "rd",        F3(2, 0x28, 0),                 F3(~2, ~0x28, ~0)|SIMM13(~0),           "M,d", 0, v8 }, /* rd %asr1,r */
-{ "rd",        F3(2, 0x28, 0),                 F3(~2, ~0x28, ~0)|RS1_G0|SIMM13(~0),    "y,d", 0, v6 }, /* rd %y,r */
-{ "rd",        F3(2, 0x28, 0)|RS1(1),          F3(~2, ~0x28, ~0)|RS1(~1)|SIMM13(~0),   "E,d", 0, v9 }, /* rd %modes,r */
-{ "rd",        F3(2, 0x28, 0)|RS1(2),          F3(~2, ~0x28, ~0)|RS1(~2)|SIMM13(~0),   "P,d", 0, v9 }, /* rd %pc,r */
-{ "rd",        F3(2, 0x28, 0)|RS1(3),          F3(~2, ~0x28, ~0)|RS1(~3)|SIMM13(~0),   "W,d", 0, v9 }, /* rd %tick,r */
-{ "rd",        F3(2, 0x28, 0)|RS1(4),          F3(~2, ~0x28, ~0)|RS1(~4)|SIMM13(~0),   "p,d", 0, v9 }, /* rd %psr,r */
-{ "rd",        F3(2, 0x28, 0)|RS1(5),          F3(~2, ~0x28, ~0)|RS1(~5)|SIMM13(~0),   "w,d", 0, v9 }, /* rd %wim,r */
-{ "rd",        F3(2, 0x2b, 0),                 F3(~2, ~0x2b, ~0)|RS1_G0|SIMM13(~0),    "t,d", 0, v6 }, /* rd %tbr,r */
-{ "rd",        F3(2, 0x2b, 0),                 F3(~2, ~0x2b, ~0)|RS1_G0|SIMM13(~0),    "s,d", 0, v9 }, /* rd %usr,r */
-{ "rd",        F3(2, 0x2b, 0),                 F3(~2, ~0x2b, ~0)|RS1_G0|SIMM13(~0),    "o,d", 0, v9 }, /* rd %asi,r */
-
- /* FIXME-now: the v9 (ie, 0.5) definitions of these conflict with the older ones.  These are the older ones. */
-{ "rd",        F3(2, 0x29, 0),                 F3(~2, ~0x29, ~0)|RS1_G0|SIMM13(~0),    "p,d", 0, v6 }, /* rd %psr,r */
-{ "rd",        F3(2, 0x2a, 0),                 F3(~2, ~0x2a, ~0)|RS1_G0|SIMM13(~0),    "w,d", 0, v6 }, /* rd %wim,r */
-
-{ "rdpr",      F3(2, 0x2a, 0),         F3(~2, ~0x2a, ~0)|SIMM13(~0),   "?,d", 0, v9 }, /* rdpr %priv_reg,r */
-{ "wrpr",      F3(2, 0x32, 0),         F3(~2, ~0x32, ~0)|SIMM13(~0),   "1,2,!", 0, v9 },
-{ "wrpr",      F3(2, 0x32, 0),         F3(~2, ~0x32, ~0)|SIMM13(~0),   "1,!", 0, v9 },
-{ "wrpr",      F3(2, 0x32, 0),         F3(~2, ~0x32, ~0)|SIMM13(~0),   "!", 0, v9 },
-{ "wrpr",      F3(2, 0x32, 1),         F3(~2, ~0x32, ~1),      "1,i,!", 0, v9 },
-{ "wrpr",      F3(2, 0x32, 1),         F3(~2, ~0x32, ~1),      "i,1,!", 0, v9 },
-{ "wrpr",      F3(2, 0x32, 1),         F3(~2, ~0x32, ~1),      "i,!", 0, v9 },
-
-{ "mov",       F3(2, 0x30, 0),         F3(~2, ~0x30, ~0)|ASI(~0),              "1,2,m", F_ALIAS, v8 }, /* wr r,r,%asrX */
-{ "mov",       F3(2, 0x30, 0),         F3(~2, ~0x30, ~0)|RD_G0|ASI(~0),        "1,2,y", F_ALIAS, v6 }, /* wr r,r,%y */
-{ "mov",       F3(2, 0x30, 0)|RD(0xe), F3(~2, ~0x30, ~0)|RD(~0xe)|ASI(~0),     "1,2,Y", F_ALIAS, v9 }, /* wr r,r,%amr */
-{ "mov",       F3(2, 0x30, 1),         F3(~2, ~0x30, ~1),                      "1,i,m", F_ALIAS, v8 }, /* wr r,i,%asrX */
-{ "mov",       F3(2, 0x30, 1),         F3(~2, ~0x30, ~1)|RD_G0,                "1,i,y", F_ALIAS, v6 }, /* wr r,i,%y */
-{ "mov",       F3(2, 0x30, 1)|RD(0xe), F3(~2, ~0x30, ~1)|RD(~0xe),             "1,i,Y", F_ALIAS, v9 }, /* wr r,i,%amr */
-{ "mov",       F3(2, 0x31, 0),         F3(~2, ~0x31, ~0)|RD_G0|ASI(~0),        "1,2,p", F_ALIAS, v6 }, /* wr r,r,%psr */
-{ "mov",       F3(2, 0x31, 1),         F3(~2, ~0x31, ~1)|RD_G0,                "1,i,p", F_ALIAS, v6 }, /* wr r,i,%psr */
-{ "mov",       F3(2, 0x32, 0),         F3(~2, ~0x32, ~0)|RD_G0|ASI(~0),        "1,2,w", F_ALIAS, v6 }, /* wr r,r,%wim */
-{ "mov",       F3(2, 0x32, 1),         F3(~2, ~0x32, ~1)|RD_G0,                "1,i,w", F_ALIAS, v6 }, /* wr r,i,%wim */
-{ "mov",       F3(2, 0x33, 0),         F3(~2, ~0x33, ~0)|RD_G0|ASI(~0),        "1,2,t", F_ALIAS, v6 }, /* wr r,r,%tbr */
-{ "mov",       F3(2, 0x33, 1),         F3(~2, ~0x33, ~1)|RD_G0,                "1,i,t", F_ALIAS, v6 }, /* wr r,i,%tbr */
-
-{ "mov",       F3(2, 0x28, 0),          F3(~2, ~0x28, ~0)|SIMM13(~0),                  "M,d", F_ALIAS, v8 }, /* rd %asr1,r */
-{ "mov",       F3(2, 0x28, 0),          F3(~2, ~0x28, ~0)|RS1_G0|SIMM13(~0),           "y,d", F_ALIAS, v6 }, /* rd %y,r */
-{ "mov",       F3(2, 0x28, 0)|RS1(0xe), F3(~2, ~0x28, ~0)|RS1(~0xe)|SIMM13(~0),        "Y,d", F_ALIAS, v9 }, /* rd %amr,r */
-{ "mov",       F3(2, 0x29, 0),          F3(~2, ~0x29, ~0)|RS1_G0|SIMM13(~0),           "p,d", F_ALIAS, v6 }, /* rd %psr,r */
-{ "mov",       F3(2, 0x2a, 0),          F3(~2, ~0x2a, ~0)|RS1_G0|SIMM13(~0),           "w,d", F_ALIAS, v6 }, /* rd %wim,r */
-{ "mov",       F3(2, 0x2b, 0),          F3(~2, ~0x2b, ~0)|RS1_G0|SIMM13(~0),           "t,d", F_ALIAS, v6 }, /* rd %tbr,r */
-
-{ "mov",       F3(2, 0x30, 0), F3(~2, ~0x30, ~0)|ASI_RS2(~0),  "1,y", F_ALIAS, v6 }, /* wr rs1,%g0,%y */
-{ "mov",       F3(2, 0x30, 1), F3(~2, ~0x30, ~1),              "i,y", F_ALIAS, v6 },
-{ "mov",       F3(2, 0x30, 1), F3(~2, ~0x30, ~1)|SIMM13(~0),   "1,y", F_ALIAS, v6 }, /* wr rs1,0,%y */
-{ "mov",       F3(2, 0x31, 0), F3(~2, ~0x31, ~0)|ASI_RS2(~0),  "1,p", F_ALIAS, v6 }, /* wr rs1,%g0,%psr */
-{ "mov",       F3(2, 0x31, 1), F3(~2, ~0x31, ~1),              "i,p", F_ALIAS, v6 },
-{ "mov",       F3(2, 0x31, 1), F3(~2, ~0x31, ~1)|SIMM13(~0),   "1,p", F_ALIAS, v6 }, /* wr rs1,0,%psr */
-{ "mov",       F3(2, 0x32, 0), F3(~2, ~0x32, ~0)|ASI_RS2(~0),  "1,w", F_ALIAS, v6 }, /* wr rs1,%g0,%wim */
-{ "mov",       F3(2, 0x32, 1), F3(~2, ~0x32, ~1),              "i,w", F_ALIAS, v6 },
-{ "mov",       F3(2, 0x32, 1), F3(~2, ~0x32, ~1)|SIMM13(~0),   "1,w", F_ALIAS, v6 }, /* wr rs1,0,%wim */
-{ "mov",       F3(2, 0x33, 0), F3(~2, ~0x33, ~0)|ASI_RS2(~0),  "1,t", F_ALIAS, v6 }, /* wr rs1,%g0,%tbr */
-{ "mov",       F3(2, 0x33, 1), F3(~2, ~0x33, ~1),              "i,t", F_ALIAS, v6 },
-{ "mov",       F3(2, 0x33, 1), F3(~2, ~0x33, ~1)|SIMM13(~0),   "1,t", F_ALIAS, v6 }, /* wr rs1,0,%tbr */
-
-{ "mov",       F3(2, 0x02, 0), F3(~2, ~0x02, ~0)|RS1_G0|ASI(~0),       "2,d", 0, v6 }, /* or %g0,rs2,d */
-{ "mov",       F3(2, 0x02, 1), F3(~2, ~0x02, ~1)|RS1_G0,               "i,d", 0, v6 }, /* or %g0,i,d   */
-{ "mov",        F3(2, 0x02, 0), F3(~2, ~0x02, ~0)|ASI_RS2(~0),         "1,d", 0, v6 }, /* or rs1,%g0,d   */
-{ "mov",        F3(2, 0x02, 1), F3(~2, ~0x02, ~1)|SIMM13(~0),          "1,d", 0, v6 }, /* or rs1,0,d */
-
-{ "or",        F3(2, 0x02, 0), F3(~2, ~0x02, ~0)|ASI(~0),      "1,2,d", 0, v6 },
-{ "or",        F3(2, 0x02, 1), F3(~2, ~0x02, ~1),              "1,i,d", 0, v6 },
-{ "or",        F3(2, 0x02, 1), F3(~2, ~0x02, ~1),              "i,1,d", 0, v6 },
-
-{ "bset",      F3(2, 0x02, 0), F3(~2, ~0x02, ~0)|ASI(~0),      "2,r", F_ALIAS, v6 },   /* or rd,rs2,rd */
-{ "bset",      F3(2, 0x02, 1), F3(~2, ~0x02, ~1),              "i,r", F_ALIAS, v6 },   /* or rd,i,rd */
-
-{ "andn",      F3(2, 0x05, 0), F3(~2, ~0x05, ~0)|ASI(~0),      "1,2,d", 0, v6 },
-{ "andn",      F3(2, 0x05, 1), F3(~2, ~0x05, ~1),              "1,i,d", 0, v6 },
-{ "andn",      F3(2, 0x05, 1), F3(~2, ~0x05, ~1),              "i,1,d", 0, v6 },
-
-{ "andncc",    F3(2, 0x15, 0), F3(~2, ~0x15, ~0)|ASI(~0),      "1,2,d", 0, v6 },
-{ "andncc",    F3(2, 0x15, 1), F3(~2, ~0x15, ~1),              "1,i,d", 0, v6 },
-{ "andncc",    F3(2, 0x15, 1), F3(~2, ~0x15, ~1),              "i,1,d", 0, v6 },
-
-{ "bclr",      F3(2, 0x05, 0), F3(~2, ~0x05, ~0)|ASI(~0),      "2,r", F_ALIAS, v6 },   /* andn rd,rs2,rd */
-{ "bclr",      F3(2, 0x05, 1), F3(~2, ~0x05, ~1),              "i,r", F_ALIAS, v6 },   /* andn rd,i,rd */
-
-{ "cmp",       F3(2, 0x14, 0), F3(~2, ~0x14, ~0)|RD_G0|ASI(~0),        "1,2", 0, v6 }, /* subcc rs1,rs2,%g0 */
-{ "cmp",       F3(2, 0x14, 1), F3(~2, ~0x14, ~1)|RD_G0,                "1,i", 0, v6 }, /* subcc rs1,i,%g0 */
-
-{ "sub",       F3(2, 0x04, 0), F3(~2, ~0x04, ~0)|ASI(~0),      "1,2,d", 0, v6 },
-{ "sub",       F3(2, 0x04, 1), F3(~2, ~0x04, ~1),              "1,i,d", 0, v6 },
-
-{ "subcc",     F3(2, 0x14, 0), F3(~2, ~0x14, ~0)|ASI(~0),      "1,2,d", 0, v6 },
-{ "subcc",     F3(2, 0x14, 1), F3(~2, ~0x14, ~1),              "1,i,d", 0, v6 },
-
-{ "subx",      F3(2, 0x0c, 0), F3(~2, ~0x0c, ~0)|ASI(~0),      "1,2,d", 0, v6 },
-{ "subx",      F3(2, 0x0c, 1), F3(~2, ~0x0c, ~1),              "1,i,d", 0, v6 },
-
-{ "subxcc",    F3(2, 0x1c, 0), F3(~2, ~0x1c, ~0)|ASI(~0),      "1,2,d", 0, v6 },
-{ "subxcc",    F3(2, 0x1c, 1), F3(~2, ~0x1c, ~1),              "1,i,d", 0, v6 },
-
-{ "and",       F3(2, 0x01, 0), F3(~2, ~0x01, ~0)|ASI(~0),      "1,2,d", 0, v6 },
-{ "and",       F3(2, 0x01, 1), F3(~2, ~0x01, ~1),              "1,i,d", 0, v6 },
-{ "and",       F3(2, 0x01, 1), F3(~2, ~0x01, ~1),              "i,1,d", 0, v6 },
-
-{ "andcc",     F3(2, 0x11, 0), F3(~2, ~0x11, ~0)|ASI(~0),      "1,2,d", 0, v6 },
-{ "andcc",     F3(2, 0x11, 1), F3(~2, ~0x11, ~1),              "1,i,d", 0, v6 },
-{ "andcc",     F3(2, 0x11, 1), F3(~2, ~0x11, ~1),              "i,1,d", 0, v6 },
-
-{ "dec",       F3(2, 0x04, 1)|SIMM13(0x1), F3(~2, ~0x04, ~1)|SIMM13(~0x0001), "r", F_ALIAS, v6 },      /* sub rd,1,rd */
-{ "dec",       F3(2, 0x04, 1),             F3(~2, ~0x04, ~1),                 "i,r", F_ALIAS, v8 },    /* sub rd,imm,rd */
-{ "deccc",     F3(2, 0x14, 1)|SIMM13(0x1), F3(~2, ~0x14, ~1)|SIMM13(~0x0001), "r", F_ALIAS, v6 },      /* subcc rd,1,rd */
-{ "deccc",     F3(2, 0x14, 1),             F3(~2, ~0x14, ~1),                 "i,r", F_ALIAS, v8 },    /* subcc rd,imm,rd */
-{ "inc",       F3(2, 0x00, 1)|SIMM13(0x1), F3(~2, ~0x00, ~1)|SIMM13(~0x0001), "r", F_ALIAS, v6 },      /* add rd,1,rd */
-{ "inc",       F3(2, 0x00, 1),             F3(~2, ~0x00, ~1),                 "i,r", F_ALIAS, v8 },    /* add rd,imm,rd */
-{ "inccc",     F3(2, 0x10, 1)|SIMM13(0x1), F3(~2, ~0x10, ~1)|SIMM13(~0x0001), "r", F_ALIAS, v6 },      /* addcc rd,1,rd */
-{ "inccc",     F3(2, 0x10, 1),             F3(~2, ~0x10, ~1),                 "i,r", F_ALIAS, v8 },    /* addcc rd,imm,rd */
-
-{ "btst",      F3(2, 0x11, 0), F3(~2, ~0x11, ~0)|RD_G0|ASI(~0), "1,2", F_ALIAS, v6 },  /* andcc rs1,rs2,%g0 */
-{ "btst",      F3(2, 0x11, 1), F3(~2, ~0x11, ~1)|RD_G0, "i,1", F_ALIAS, v6 },  /* andcc rs1,i,%g0 */
-
-{ "neg",       F3(2, 0x04, 0), F3(~2, ~0x04, ~0)|RS1_G0|ASI(~0), "2,d", F_ALIAS, v6 }, /* sub %g0,rs2,rd */
-{ "neg",       F3(2, 0x04, 0), F3(~2, ~0x04, ~0)|RS1_G0|ASI(~0), "r", F_ALIAS, v6 }, /* sub %g0,rd,rd */
-
-{ "add",       F3(2, 0x00, 0), F3(~2, ~0x00, ~0)|ASI(~0),      "1,2,d", 0, v6 },
-{ "add",       F3(2, 0x00, 1), F3(~2, ~0x00, ~1),              "1,i,d", 0, v6 },
-{ "add",       F3(2, 0x00, 1), F3(~2, ~0x00, ~1),              "i,1,d", 0, v6 },
-{ "addcc",     F3(2, 0x10, 0), F3(~2, ~0x10, ~0)|ASI(~0),      "1,2,d", 0, v6 },
-{ "addcc",     F3(2, 0x10, 1), F3(~2, ~0x10, ~1),              "1,i,d", 0, v6 },
-{ "addcc",     F3(2, 0x10, 1), F3(~2, ~0x10, ~1),              "i,1,d", 0, v6 },
-{ "addx",      F3(2, 0x08, 0), F3(~2, ~0x08, ~0)|ASI(~0),      "1,2,d", 0, v6 },
-{ "addx",      F3(2, 0x08, 1), F3(~2, ~0x08, ~1),              "1,i,d", 0, v6 },
-{ "addx",      F3(2, 0x08, 1), F3(~2, ~0x08, ~1),              "i,1,d", 0, v6 },
-{ "addxcc",    F3(2, 0x18, 0), F3(~2, ~0x18, ~0)|ASI(~0),      "1,2,d", 0, v6 },
-{ "addxcc",    F3(2, 0x18, 1), F3(~2, ~0x18, ~1),              "1,i,d", 0, v6 },
-{ "addxcc",    F3(2, 0x18, 1), F3(~2, ~0x18, ~1),              "i,1,d", 0, v6 },
-
-{ "smul",      F3(2, 0x0b, 0), F3(~2, ~0x0b, ~0)|ASI(~0),      "1,2,d", 0, v8 },
-{ "smul",      F3(2, 0x0b, 1), F3(~2, ~0x0b, ~1),              "1,i,d", 0, v8 },
-{ "smul",      F3(2, 0x0b, 1), F3(~2, ~0x0b, ~1),              "i,1,d", 0, v8 },
-{ "smulcc",    F3(2, 0x1b, 0), F3(~2, ~0x1b, ~0)|ASI(~0),      "1,2,d", 0, v8 },
-{ "smulcc",    F3(2, 0x1b, 1), F3(~2, ~0x1b, ~1),              "1,i,d", 0, v8 },
-{ "smulcc",    F3(2, 0x1b, 1), F3(~2, ~0x1b, ~1),              "i,1,d", 0, v8 },
-{ "umul",      F3(2, 0x0a, 0), F3(~2, ~0x0a, ~0)|ASI(~0),      "1,2,d", 0, v8 },
-{ "umul",      F3(2, 0x0a, 1), F3(~2, ~0x0a, ~1),              "1,i,d", 0, v8 },
-{ "umul",      F3(2, 0x0a, 1), F3(~2, ~0x0a, ~1),              "i,1,d", 0, v8 },
-{ "umulcc",    F3(2, 0x1a, 0), F3(~2, ~0x1a, ~0)|ASI(~0),      "1,2,d", 0, v8 },
-{ "umulcc",    F3(2, 0x1a, 1), F3(~2, ~0x1a, ~1),              "1,i,d", 0, v8 },
-{ "umulcc",    F3(2, 0x1a, 1), F3(~2, ~0x1a, ~1),              "i,1,d", 0, v8 },
-{ "sdiv",      F3(2, 0x0f, 0), F3(~2, ~0x0f, ~0)|ASI(~0),      "1,2,d", 0, v8 },
-{ "sdiv",      F3(2, 0x0f, 1), F3(~2, ~0x0f, ~1),              "1,i,d", 0, v8 },
-{ "sdiv",      F3(2, 0x0f, 1), F3(~2, ~0x0f, ~1),              "i,1,d", 0, v8 },
-{ "sdivcc",    F3(2, 0x1f, 0), F3(~2, ~0x1f, ~0)|ASI(~0),      "1,2,d", 0, v8 },
-{ "sdivcc",    F3(2, 0x1f, 1), F3(~2, ~0x1f, ~1),              "1,i,d", 0, v8 },
-{ "sdivcc",    F3(2, 0x1f, 1), F3(~2, ~0x1f, ~1),              "i,1,d", 0, v8 },
-{ "udiv",      F3(2, 0x0e, 0), F3(~2, ~0x0e, ~0)|ASI(~0),      "1,2,d", 0, v8 },
-{ "udiv",      F3(2, 0x0e, 1), F3(~2, ~0x0e, ~1),              "1,i,d", 0, v8 },
-{ "udiv",      F3(2, 0x0e, 1), F3(~2, ~0x0e, ~1),              "i,1,d", 0, v8 },
-{ "udivcc",    F3(2, 0x1e, 0), F3(~2, ~0x1e, ~0)|ASI(~0),      "1,2,d", 0, v8 },
-{ "udivcc",    F3(2, 0x1e, 1), F3(~2, ~0x1e, ~1),              "1,i,d", 0, v8 },
-{ "udivcc",    F3(2, 0x1e, 1), F3(~2, ~0x1e, ~1),              "i,1,d", 0, v8 },
-
-{ "mulx",      F3(2, 0x09, 0), F3(~2, ~0x09, ~0)|ASI(~0),      "1,2,d", 0, v9 },
-{ "mulx",      F3(2, 0x09, 1), F3(~2, ~0x09, ~1),              "1,i,d", 0, v9 },
-{ "umulxcc",   F3(2, 0x19, 0), F3(~2, ~0x19, ~0)|ASI(~0),      "1,2,d", 0, v9 },
-{ "umulxcc",   F3(2, 0x19, 1), F3(~2, ~0x19, ~1),              "1,i,d", 0, v9 },
-{ "sdivxcc",   F3(2, 0x1d, 0), F3(~2, ~0x1d, ~0)|ASI(~0),      "1,2,d", 0, v9 },
-{ "sdivxcc",   F3(2, 0x1d, 1), F3(~2, ~0x1d, ~1),              "1,i,d", 0, v9 },
-{ "udivx",     F3(2, 0x0d, 0), F3(~2, ~0x0d, ~0)|ASI(~0),      "1,2,d", 0, v9 },
-{ "udivx",     F3(2, 0x0d, 1), F3(~2, ~0x0d, ~1),              "1,i,d", 0, v9 },
-
-{ "call",      F1(0x1), F1(~0x1), "L", F_DELAYED, v6 },
-{ "call",      F1(0x1), F1(~0x1), "L,#", F_DELAYED, v6 },
-{ "call",      F3(2, 0x38, 0)|RD(0xf), F3(~2, ~0x38, ~0)|RD(~0xf)|ASI_RS2(~0), "1", F_DELAYED, v6 }, /* jmpl rs1+%g0, %o7 */
-{ "call",      F3(2, 0x38, 0)|RD(0xf), F3(~2, ~0x38, ~0)|RD(~0xf)|ASI_RS2(~0), "1,#", F_DELAYED, v6 },
-
-/* Conditional instructions.
-
-   Because this part of the table was such a mess earlier, I have
-   macrofied it so that all the branches and traps are generated from
-   a single-line description of each condition value.  John Gilmore. */
-
-/* Define branches -- one annulled, one without, etc. */
-#define br(opcode, mask, lose, flags) \
- { opcode, (mask)|ANNUL, (lose),       ",a l",   (flags), v6 }, \
- { opcode, (mask)      , (lose)|ANNUL, "l",     (flags), v6 }
-
-#define brx(opcode, mask, lose, flags) /* v9 */ \
- { opcode, (mask), (lose)|ANNUL|BPRED, "Z,G",   (flags), v9 }, \
- { opcode, (mask), (lose)|ANNUL|BPRED, ",N Z,G",   (flags), v9 }, \
- { opcode, (mask)|ANNUL, (lose)|BPRED, ",a Z,G", (flags), v9 }, \
- { opcode, (mask)|ANNUL, (lose)|BPRED, ",a,N Z,G", (flags), v9 }, \
- { opcode, (mask)|BPRED, (lose)|ANNUL, ",T Z,G",   (flags), v9 }, \
- { opcode, (mask)|ANNUL|BPRED, (lose), ",a,T Z,G", (flags), v9 }, \
- { opcode, (mask), (lose)|ANNUL|BPRED, "z,G",   (flags), v9 }, \
- { opcode, (mask), (lose)|ANNUL|BPRED, ",N z,G",   (flags), v9 }, \
- { opcode, (mask)|ANNUL, (lose)|BPRED, ",a z,G", (flags), v9 }, \
- { opcode, (mask)|ANNUL, (lose)|BPRED, ",a,N z,G", (flags), v9 }, \
- { opcode, (mask)|BPRED, (lose)|ANNUL, ",T z,G",   (flags), v9 }, \
- { opcode, (mask)|ANNUL|BPRED, (lose), ",a,T z,G", (flags), v9 }
-
-/* Define four traps: reg+reg, reg + immediate, immediate alone, reg alone. */
-#define tr(opcode, mask, lose, flags) \
- { opcode, (mask)|IMMED, (lose)|RS1_G0,                "i",     (flags), v6 }, /* %g0 + imm */ \
- { opcode, (mask)|IMMED, (lose),               "1+i",   (flags), v6 }, /* rs1 + imm */ \
- { opcode, (mask), IMMED|(lose),               "1+2",   (flags), v6 }, /* rs1 + rs2 */ \
- { opcode, (mask)|(2<<11)|IMMED, (lose)|RS1_G0,        "Z,i",   (flags), v9 }, /* %g0 + imm */ \
- { opcode, (mask)|(2<<11)|IMMED, (lose),       "Z,1+i", (flags), v9 }, /* rs1 + imm */ \
- { opcode, (mask)|(2<<11), IMMED|(lose),       "Z,1+2", (flags), v9 }, /* rs1 + rs2 */ \
- { opcode, (mask)|(2<<11), IMMED|(lose)|RS2_G0,        "Z,1",   (flags), v9 }, /* rs1 + %g0 */ \
- { opcode, (mask)|IMMED, (lose)|RS1_G0,        "z,i",   (flags)|F_ALIAS, v9 }, /* %g0 + imm */ \
- { opcode, (mask)|IMMED, (lose),       "z,1+i", (flags)|F_ALIAS, v9 }, /* rs1 + imm */ \
- { opcode, (mask), IMMED|(lose),       "z,1+2", (flags)|F_ALIAS, v9 }, /* rs1 + rs2 */ \
- { opcode, (mask), IMMED|(lose)|RS2_G0,        "z,1",   (flags)|F_ALIAS, v9 }, /* rs1 + %g0 */ \
- { opcode, (mask), IMMED|(lose)|RS2_G0,                "1",     (flags), v6 } /* rs1 + %g0 */
-
-/* Define both branches and traps based on condition mask */
-#define cond(bop, top, mask, flags) \
-  br(bop,  F2(0, 2)|(mask), F2(~0, ~2)|((~mask)&COND(~0)), F_DELAYED|(flags)), \
-  brx(bop, F2(0, 1)|(mask), F2(~0, ~1)|((~mask)&COND(~0)), F_DELAYED|(flags)), /* v9 */ \
-  tr(top,  F3(2, 0x3a, 0)|(mask), F3(~2, ~0x3a, 0)|((~mask)&COND(~0)), (flags))
-
-/* Define all the conditions, all the branches, all the traps.  */
-
-cond ("b",     "t",    CONDA, 0),
-cond ("ba",    "ta",   CONDA, F_ALIAS), /* for nothing */
-cond ("bcc",   "tcc",  CONDCC, 0),
-cond ("bcs",   "tcs",  CONDCS, 0),
-cond ("be",    "te",   CONDE, 0),
-cond ("bg",    "tg",   CONDG, 0),
-cond ("bgt",   "tgt",   CONDG, F_ALIAS),
-cond ("bge",   "tge",  CONDGE, 0),
-cond ("bgeu",  "tgeu", CONDGEU, F_ALIAS), /* for cc */
-cond ("bgu",   "tgu",  CONDGU, 0),
-cond ("bl",    "tl",   CONDL, 0),
-cond ("blt",   "tlt",   CONDL, F_ALIAS),
-cond ("ble",   "tle",  CONDLE, 0),
-cond ("bleu",  "tleu", CONDLEU, 0),
-cond ("blu",   "tlu",  CONDLU, F_ALIAS), /* for cs */
-cond ("bn",    "tn",   CONDN, 0),
-cond ("bne",   "tne",  CONDNE, 0),
-cond ("bneg",  "tneg", CONDNEG, 0),
-cond ("bnz",   "tnz",  CONDNZ, F_ALIAS), /* for ne */
-cond ("bpos",  "tpos", CONDPOS, 0),
-cond ("bvc",   "tvc",  CONDVC, 0),
-cond ("bvs",   "tvs",  CONDVS, 0),
-cond ("bz",    "tz",   CONDZ, F_ALIAS), /* for e */
-
-#undef cond
-#undef br
-#undef tr
-
-#define brr(opcode, mask, lose, flags) /* v9 */ \
- { opcode, (mask), (lose)|ANNUL|BPRED, "1,k",   F_DELAYED|(flags), v9 }, \
- { opcode, (mask), (lose)|ANNUL|BPRED, ",N 1,k", F_DELAYED|(flags), v9 }, \
- { opcode, (mask)|ANNUL, (lose)|BPRED, ",a 1,k", F_DELAYED|(flags), v9 }, \
- { opcode, (mask)|ANNUL, (lose)|BPRED, ",a,N 1,k", F_DELAYED|(flags), v9 }, \
- { opcode, (mask)|BPRED, (lose)|ANNUL, ",T 1,k",   F_DELAYED|(flags), v9 }, \
- { opcode, (mask)|ANNUL|BPRED, (lose), ",a,T 1,k", F_DELAYED|(flags), v9 }
-
-#define condr(bop, mask, flags) /* v9 */ \
-  brr(bop, F2(0, 3)|COND(mask), F2(~0, ~3)|COND(~(mask)), (flags)) /* v9 */ \
-
-/* v9 */ condr("bre", 0x1, 0),
-/* v9 */ condr("brne", 0x5, 0),
-/* v9 */ condr("brneg", 0x3, 0),
-/* v9 */ condr("brnegz", 0x2, 0),
-/* v9 */ condr("brposnz", 0x6, 0),
-/* v9 */ condr("brnz", 0x5, F_ALIAS),
-/* v9 */ condr("brpos", 0x7, 0),
-/* v9 */ condr("brz", 0x1, F_ALIAS),
-
-#undef condr /* v9 */
-#undef brr /* v9 */
-
-#define mrr(opcode, mask, lose, flags) /* v9 */ \
- { opcode, (mask), (lose), "1,2,d", (flags), v9 }, \
- { opcode, (mask), (lose), "1,i,d", (flags), v9 }
-
-#define movr(mop, mask, flags) /* v9 */ \
-  mrr(mop, F3(2, 0x2f, 0)|COND(mask), F3(~2, ~0x2f, ~0)|COND(~(mask)), (flags)), /* v9 */ \
-  mrr(mop, F3(2, 0x2f, 1)|COND(mask), F3(~2, ~0x2f, ~1)|COND(~(mask)), (flags)) /* v9 */
-
-#define fmrrs(opcode, mask, lose, flags) /* v9 */ \
- { opcode, (mask), (lose), "1,f,g", (flags), v9 }
-#define fmrrd(opcode, mask, lose, flags) /* v9 */ \
- { opcode, (mask), (lose), "1,B,H", (flags), v9 }
-#define fmrrq(opcode, mask, lose, flags) /* v9 */ \
- { opcode, (mask), (lose), "1,R,J", (flags), v9 }
-
-#define fmovrs(mop, mask, flags) /* v9 */ \
-  fmrrs(mop, F3(2, 0x25, 0)|OPF_LOW(5)|COND(mask), F3(~2, ~0x25, 0)|OPF_LOW(~5)|COND(~(mask)), (flags)) /* v9 */
-#define fmovrd(mop, mask, flags) /* v9 */ \
-  fmrrd(mop, F3(2, 0x25, 0)|OPF_LOW(6)|COND(mask), F3(~2, ~0x25, 0)|OPF_LOW(~6)|COND(~(mask)), (flags)) /* v9 */
-#define fmovrq(mop, mask, flags) /* v9 */ \
-  fmrrq(mop, F3(2, 0x25, 0)|OPF_LOW(7)|COND(mask), F3(~2, ~0x25, 0)|OPF_LOW(~7)|COND(~(mask)), (flags)) /* v9 */
-
-/* v9 */ movr("movrne", 0x5, 0),
-/* v9 */ movr("movre", 0x1, 0),
-/* v9 */ movr("movrpos", 0x7, 0),
-/* v9 */ movr("movrneg", 0x3, 0),
-/* v9 */ movr("movrnegz", 0x2, 0),
-/* v9 */ movr("movrposnz", 0x6, 0),
-/* v9 */ movr("movrnz", 0x5, F_ALIAS),
-/* v9 */ movr("movrz", 0x1, F_ALIAS),
-
-/* v9 */ fmovrs("fmovrnes", 0x5, 0),
-/* v9 */ fmovrs("fmovres", 0x1, 0),
-/* v9 */ fmovrs("fmovrposs", 0x7, 0),
-/* v9 */ fmovrs("fmovrnegs", 0x3, 0),
-/* v9 */ fmovrs("fmovrnegzs", 0x2, 0),
-/* v9 */ fmovrs("fmovrposnzs", 0x6, 0),
-/* v9 */ fmovrs("fmovrnzs", 0x5, F_ALIAS),
-/* v9 */ fmovrs("fmovrzs", 0x1, F_ALIAS),
-
-/* v9 */ fmovrd("fmovrned", 0x5, 0),
-/* v9 */ fmovrd("fmovred", 0x1, 0),
-/* v9 */ fmovrd("fmovrposd", 0x7, 0),
-/* v9 */ fmovrd("fmovrnegd", 0x3, 0),
-/* v9 */ fmovrd("fmovrnegzd", 0x2, 0),
-/* v9 */ fmovrd("fmovrposnzd", 0x6, 0),
-/* v9 */ fmovrd("fmovrnzd", 0x5, F_ALIAS),
-/* v9 */ fmovrd("fmovrzd", 0x1, F_ALIAS),
-
-/* v9 */ fmovrq("fmovrneq", 0x5, 0),
-/* v9 */ fmovrq("fmovreq", 0x1, 0),
-/* v9 */ fmovrq("fmovrposq", 0x7, 0),
-/* v9 */ fmovrq("fmovrnegq", 0x3, 0),
-/* v9 */ fmovrq("fmovrnegzq", 0x2, 0),
-/* v9 */ fmovrq("fmovrposnzq", 0x6, 0),
-/* v9 */ fmovrq("fmovrnzq", 0x5, F_ALIAS),
-/* v9 */ fmovrq("fmovrzq", 0x1, F_ALIAS),
-
-#undef movr /* v9 */
-#undef mrr /* v9 */
-#undef fmovr /* v9 */
-#undef fmrr /* v9 */
-
-{ "mova",      F3(2, 0x2c, 0)|FCC(0)|MCOND(FCONDA,0), MCOND(~FCONDA,~0)|FCC(~0)|F3(~2, ~0x2c, ~0), "6,2,d", 0, v9 },
-{ "mova",      F3(2, 0x2c, 1)|FCC(0)|MCOND(FCONDA,0), MCOND(~FCONDA,~0)|FCC(~0)|F3(~2, ~0x2c,~1), "6,I,d", 0, v9 },
-{ "mova",      F3(2, 0x2c, 0)|FCC(1)|MCOND(FCONDA,0), MCOND(~FCONDA,~0)|FCC(~1)|F3(~2, ~0x2c, ~0), "7,2,d", 0, v9 },
-{ "mova",      F3(2, 0x2c, 1)|FCC(1)|MCOND(FCONDA,0), MCOND(~FCONDA,~0)|FCC(~1)|F3(~2, ~0x2c, ~1), "7,I,d", 0, v9 },
-{ "mova",      F3(2, 0x2c, 0)|FCC(2)|MCOND(FCONDA,0), MCOND(~FCONDA,~0)|FCC(~2)|F3(~2, ~0x2c, ~0), "8,2,d", 0, v9 },
-{ "mova",      F3(2, 0x2c, 1)|FCC(2)|MCOND(FCONDA,0), MCOND(~FCONDA,~0)|FCC(~2)|F3(~2, ~0x2c, ~1), "8,I,d", 0, v9 },
-{ "mova",      F3(2, 0x2c, 0)|FCC(3)|MCOND(FCONDA,0), MCOND(~FCONDA,~0)|FCC(~3)|F3(~2, ~0x2c, ~0), "9,2,d", 0, v9 },
-{ "mova",      F3(2, 0x2c, 1)|FCC(3)|MCOND(FCONDA,0), MCOND(~FCONDA,~0)|FCC(~3)|F3(~2, ~0x2c, ~1), "9,I,d", 0, v9 },
-{ "mova",      F3(2, 0x2c, 0)|MCOND(CONDA,1)|ICC, F3(~2, ~0x2c, ~0)|MCOND(~CONDA,~1)|XCC|(1<<12), "z,2,d", 0, v9 },
-{ "mova",      F3(2, 0x2c, 1)|MCOND(CONDA,1)|ICC, F3(~2, ~0x2c, ~1)|MCOND(~CONDA,~1)|XCC|(1<<12), "z,I,d", 0, v9 },
-{ "mova",      F3(2, 0x2c, 0)|MCOND(CONDA,1)|XCC, F3(~2, ~0x2c, ~0)|MCOND(~CONDA,~1)|(1<<12), "Z,2,d", 0, v9 },
-{ "mova",      F3(2, 0x2c, 1)|MCOND(CONDA,1)|XCC, F3(~2, ~0x2c, ~1)|MCOND(~CONDA,~1)|(1<<12), "Z,I,d", 0, v9 },
-{ "movcc",     F3(2, 0x2c, 0)|MCOND(CONDCC,1)|ICC, F3(~2, ~0x2c, ~0)|MCOND(~CONDCC,~1)|XCC|(1<<12), "z,2,d", 0, v9 },
-{ "movcc",     F3(2, 0x2c, 1)|MCOND(CONDCC,1)|ICC, F3(~2, ~0x2c, ~1)|MCOND(~CONDCC,~1)|XCC|(1<<12), "z,I,d", 0, v9 },
-{ "movcc",     F3(2, 0x2c, 0)|MCOND(CONDCC,1)|XCC, F3(~2, ~0x2c, ~0)|MCOND(~CONDCC,~1)|(1<<12), "Z,2,d", 0, v9 },
-{ "movcc",     F3(2, 0x2c, 1)|MCOND(CONDCC,1)|XCC, F3(~2, ~0x2c, ~1)|MCOND(~CONDCC,~1)|(1<<12), "Z,I,d", 0, v9 },
-{ "movgeu",    F3(2, 0x2c, 0)|MCOND(CONDGEU,1)|ICC, F3(~2, ~0x2c, ~0)|MCOND(~CONDGEU,~1)|XCC|(1<<12), "z,2,d", F_ALIAS, v9 },
-{ "movgeu",    F3(2, 0x2c, 1)|MCOND(CONDGEU,1)|ICC, F3(~2, ~0x2c, ~1)|MCOND(~CONDGEU,~1)|XCC|(1<<12), "z,I,d", F_ALIAS, v9 },
-{ "movgeu",    F3(2, 0x2c, 0)|MCOND(CONDGEU,1)|XCC, F3(~2, ~0x2c, ~0)|MCOND(~CONDGEU,~1)|(1<<12), "Z,2,d", F_ALIAS, v9 },
-{ "movgeu",    F3(2, 0x2c, 1)|MCOND(CONDGEU,1)|XCC, F3(~2, ~0x2c, ~1)|MCOND(~CONDGEU,~1)|(1<<12), "Z,I,d", F_ALIAS, v9 },
-{ "movcs",     F3(2, 0x2c, 0)|MCOND(CONDCS,1)|ICC, F3(~2, ~0x2c, ~0)|MCOND(~CONDCS,~1)|XCC|(1<<12), "z,2,d", 0, v9 },
-{ "movcs",     F3(2, 0x2c, 1)|MCOND(CONDCS,1)|ICC, F3(~2, ~0x2c, ~1)|MCOND(~CONDCS,~1)|XCC|(1<<12), "z,I,d", 0, v9 },
-{ "movcs",     F3(2, 0x2c, 0)|MCOND(CONDCS,1)|XCC, F3(~2, ~0x2c, ~0)|MCOND(~CONDCS,~1)|(1<<12), "Z,2,d", 0, v9 },
-{ "movcs",     F3(2, 0x2c, 1)|MCOND(CONDCS,1)|XCC, F3(~2, ~0x2c, ~1)|MCOND(~CONDCS,~1)|(1<<12), "Z,I,d", 0, v9 },
-{ "movlu",     F3(2, 0x2c, 0)|MCOND(CONDLU,1)|ICC, F3(~2, ~0x2c, ~0)|MCOND(~CONDLU,~1)|XCC|(1<<12), "z,2,d", F_ALIAS, v9 },
-{ "movlu",     F3(2, 0x2c, 1)|MCOND(CONDLU,1)|ICC, F3(~2, ~0x2c, ~1)|MCOND(~CONDLU,~1)|XCC|(1<<12), "z,I,d", F_ALIAS, v9 },
-{ "movlu",     F3(2, 0x2c, 0)|MCOND(CONDLU,1)|XCC, F3(~2, ~0x2c, ~0)|MCOND(~CONDLU,~1)|(1<<12), "Z,2,d", F_ALIAS, v9 },
-{ "movlu",     F3(2, 0x2c, 1)|MCOND(CONDLU,1)|XCC, F3(~2, ~0x2c, ~1)|MCOND(~CONDLU,~1)|(1<<12), "Z,I,d", F_ALIAS, v9 },
-{ "move",      F3(2, 0x2c, 0)|FCC(0)|MCOND(FCONDE,0), MCOND(~FCONDE,~0)|FCC(~0)|F3(~2, ~0x2c, ~0), "6,2,d", 0, v9 },
-{ "move",      F3(2, 0x2c, 1)|FCC(0)|MCOND(FCONDE,0), MCOND(~FCONDE,~0)|FCC(~0)|F3(~2, ~0x2c, ~1), "6,I,d", 0, v9 },
-{ "move",      F3(2, 0x2c, 0)|FCC(1)|MCOND(FCONDE,0), MCOND(~FCONDE,~0)|FCC(~1)|F3(~2, ~0x2c, ~0), "7,2,d", 0, v9 },
-{ "move",      F3(2, 0x2c, 1)|FCC(1)|MCOND(FCONDE,0), MCOND(~FCONDE,~0)|FCC(~1)|F3(~2, ~0x2c, ~1), "7,I,d", 0, v9 },
-{ "move",      F3(2, 0x2c, 0)|FCC(2)|MCOND(FCONDE,0), MCOND(~FCONDE,~0)|FCC(~2)|F3(~2, ~0x2c, ~0), "8,2,d", 0, v9 },
-{ "move",      F3(2, 0x2c, 1)|FCC(2)|MCOND(FCONDE,0), MCOND(~FCONDE,~0)|FCC(~2)|F3(~2, ~0x2c, ~1), "8,I,d", 0, v9 },
-{ "move",      F3(2, 0x2c, 0)|FCC(3)|MCOND(FCONDE,0), MCOND(~FCONDE,~0)|FCC(~3)|F3(~2, ~0x2c, ~0), "9,2,d", 0, v9 },
-{ "move",      F3(2, 0x2c, 1)|FCC(3)|MCOND(FCONDE,0), MCOND(~FCONDE,~0)|FCC(~3)|F3(~2, ~0x2c, ~1), "9,I,d", 0, v9 },
-{ "move",      F3(2, 0x2c, 0)|MCOND(CONDE,1)|ICC, F3(~2, ~0x2c, ~0)|MCOND(~CONDE,~1)|XCC|(1<<12), "z,2,d", 0, v9 },
-{ "move",      F3(2, 0x2c, 1)|MCOND(CONDE,1)|ICC, F3(~2, ~0x2c, ~1)|MCOND(~CONDE,~1)|XCC|(1<<12), "z,I,d", 0, v9 },
-{ "move",      F3(2, 0x2c, 0)|MCOND(CONDE,1)|XCC, F3(~2, ~0x2c, ~0)|MCOND(~CONDE,~1)|(1<<12), "Z,2,d", 0, v9 },
-{ "move",      F3(2, 0x2c, 1)|MCOND(CONDE,1)|XCC, F3(~2, ~0x2c, ~1)|MCOND(~CONDE,~1)|(1<<12), "Z,I,d", 0, v9 },
-{ "movg",      F3(2, 0x2c, 0)|FCC(0)|MCOND(FCONDG,0), MCOND(~FCONDG,~0)|FCC(~0)|F3(~2, ~0x2c, ~0), "6,2,d", 0, v9 },
-{ "movg",      F3(2, 0x2c, 1)|FCC(0)|MCOND(FCONDG,0), MCOND(~FCONDG,~0)|FCC(~0)|F3(~2, ~0x2c, ~1), "6,I,d", 0, v9 },
-{ "movg",      F3(2, 0x2c, 0)|FCC(1)|MCOND(FCONDG,0), MCOND(~FCONDG,~0)|FCC(~1)|F3(~2, ~0x2c, ~0), "7,2,d", 0, v9 },
-{ "movg",      F3(2, 0x2c, 1)|FCC(1)|MCOND(FCONDG,0), MCOND(~FCONDG,~0)|FCC(~1)|F3(~2, ~0x2c, ~1), "7,I,d", 0, v9 },
-{ "movg",      F3(2, 0x2c, 0)|FCC(2)|MCOND(FCONDG,0), MCOND(~FCONDG,~0)|FCC(~2)|F3(~2, ~0x2c, ~0), "8,2,d", 0, v9 },
-{ "movg",      F3(2, 0x2c, 1)|FCC(2)|MCOND(FCONDG,0), MCOND(~FCONDG,~0)|FCC(~2)|F3(~2, ~0x2c, ~1), "8,I,d", 0, v9 },
-{ "movg",      F3(2, 0x2c, 0)|FCC(3)|MCOND(FCONDG,0), MCOND(~FCONDG,~0)|FCC(~3)|F3(~2, ~0x2c, ~0), "9,2,d", 0, v9 },
-{ "movg",      F3(2, 0x2c, 1)|FCC(3)|MCOND(FCONDG,0), MCOND(~FCONDG,~0)|FCC(~3)|F3(~2, ~0x2c, ~1), "9,I,d", 0, v9 },
-{ "movg",      F3(2, 0x2c, 0)|MCOND(CONDG,1)|ICC, F3(~2, ~0x2c, ~0)|MCOND(~CONDG,~1)|XCC|(1<<12), "z,2,d", 0, v9 },
-{ "movg",      F3(2, 0x2c, 1)|MCOND(CONDG,1)|ICC, F3(~2, ~0x2c, ~1)|MCOND(~CONDG,~1)|XCC|(1<<12), "z,I,d", 0, v9 },
-{ "movg",      F3(2, 0x2c, 0)|MCOND(CONDG,1)|XCC, F3(~2, ~0x2c, ~0)|MCOND(~CONDG,~1)|(1<<12), "Z,2,d", 0, v9 },
-{ "movg",      F3(2, 0x2c, 1)|MCOND(CONDG,1)|XCC, F3(~2, ~0x2c, ~1)|MCOND(~CONDG,~1)|(1<<12), "Z,I,d", 0, v9 },
-{ "movge",     F3(2, 0x2c, 0)|FCC(0)|MCOND(FCONDGE,0), MCOND(~FCONDGE,~0)|FCC(~0)|F3(~2, ~0x2c, ~0), "6,2,d", 0, v9 },
-{ "movge",     F3(2, 0x2c, 1)|FCC(0)|MCOND(FCONDGE,0), MCOND(~FCONDGE,~0)|FCC(~0)|F3(~2, ~0x2c, ~1), "6,I,d", 0, v9 },
-{ "movge",     F3(2, 0x2c, 0)|FCC(1)|MCOND(FCONDGE,0), MCOND(~FCONDGE,~0)|FCC(~1)|F3(~2, ~0x2c, ~0), "7,2,d", 0, v9 },
-{ "movge",     F3(2, 0x2c, 1)|FCC(1)|MCOND(FCONDGE,0), MCOND(~FCONDGE,~0)|FCC(~1)|F3(~2, ~0x2c, ~1), "7,I,d", 0, v9 },
-{ "movge",     F3(2, 0x2c, 0)|FCC(2)|MCOND(FCONDGE,0), MCOND(~FCONDGE,~0)|FCC(~2)|F3(~2, ~0x2c, ~0), "8,2,d", 0, v9 },
-{ "movge",     F3(2, 0x2c, 1)|FCC(2)|MCOND(FCONDGE,0), MCOND(~FCONDGE,~0)|FCC(~2)|F3(~2, ~0x2c, ~1), "8,I,d", 0, v9 },
-{ "movge",     F3(2, 0x2c, 0)|FCC(3)|MCOND(FCONDGE,0), MCOND(~FCONDGE,~0)|FCC(~3)|F3(~2, ~0x2c, ~0), "9,2,d", 0, v9 },
-{ "movge",     F3(2, 0x2c, 1)|FCC(3)|MCOND(FCONDGE,0), MCOND(~FCONDGE,~0)|FCC(~3)|F3(~2, ~0x2c, ~1), "9,I,d", 0, v9 },
-{ "movge",     F3(2, 0x2c, 0)|MCOND(CONDGE,1)|ICC, F3(~2, ~0x2c, ~0)|MCOND(~CONDGE,~1)|XCC|(1<<12), "z,2,d", 0, v9 },
-{ "movge",     F3(2, 0x2c, 1)|MCOND(CONDGE,1)|ICC, F3(~2, ~0x2c, ~1)|MCOND(~CONDGE,~1)|XCC|(1<<12), "z,I,d", 0, v9 },
-{ "movge",     F3(2, 0x2c, 0)|MCOND(CONDGE,1)|XCC, F3(~2, ~0x2c, ~0)|MCOND(~CONDGE,~1)|(1<<12), "Z,2,d", 0, v9 },
-{ "movge",     F3(2, 0x2c, 1)|MCOND(CONDGE,1)|XCC, F3(~2, ~0x2c, ~1)|MCOND(~CONDGE,~1)|(1<<12), "Z,I,d", 0, v9 },
-{ "movgu",     F3(2, 0x2c, 0)|MCOND(CONDGU,1)|ICC, F3(~2, ~0x2c, ~0)|MCOND(~CONDGU,~1)|XCC|(1<<12), "z,2,d", 0, v9 },
-{ "movgu",     F3(2, 0x2c, 1)|MCOND(CONDGU,1)|ICC, F3(~2, ~0x2c, ~1)|MCOND(~CONDGU,~1)|XCC|(1<<12), "z,I,d", 0, v9 },
-{ "movgu",     F3(2, 0x2c, 0)|MCOND(CONDGU,1)|XCC, F3(~2, ~0x2c, ~0)|MCOND(~CONDGU,~1)|(1<<12), "Z,2,d", 0, v9 },
-{ "movgu",     F3(2, 0x2c, 1)|MCOND(CONDGU,1)|XCC, F3(~2, ~0x2c, ~1)|MCOND(~CONDGU,~1)|(1<<12), "Z,I,d", 0, v9 },
-{ "movl",      F3(2, 0x2c, 0)|FCC(0)|MCOND(FCONDL,0), MCOND(~FCONDL,~0)|FCC(~0)|F3(~2, ~0x2c, ~0), "6,2,d", 0, v9 },
-{ "movl",      F3(2, 0x2c, 1)|FCC(0)|MCOND(FCONDL,0), MCOND(~FCONDL,~0)|FCC(~0)|F3(~2, ~0x2c, ~1), "6,I,d", 0, v9 },
-{ "movl",      F3(2, 0x2c, 0)|FCC(1)|MCOND(FCONDL,0), MCOND(~FCONDL,~0)|FCC(~1)|F3(~2, ~0x2c, ~0), "7,2,d", 0, v9 },
-{ "movl",      F3(2, 0x2c, 1)|FCC(1)|MCOND(FCONDL,0), MCOND(~FCONDL,~0)|FCC(~1)|F3(~2, ~0x2c, ~1), "7,I,d", 0, v9 },
-{ "movl",      F3(2, 0x2c, 0)|FCC(2)|MCOND(FCONDL,0), MCOND(~FCONDL,~0)|FCC(~2)|F3(~2, ~0x2c, ~0), "8,2,d", 0, v9 },
-{ "movl",      F3(2, 0x2c, 1)|FCC(2)|MCOND(FCONDL,0), MCOND(~FCONDL,~0)|FCC(~2)|F3(~2, ~0x2c, ~1), "8,I,d", 0, v9 },
-{ "movl",      F3(2, 0x2c, 0)|FCC(3)|MCOND(FCONDL,0), MCOND(~FCONDL,~0)|FCC(~3)|F3(~2, ~0x2c, ~0), "9,2,d", 0, v9 },
-{ "movl",      F3(2, 0x2c, 1)|FCC(3)|MCOND(FCONDL,0), MCOND(~FCONDL,~0)|FCC(~3)|F3(~2, ~0x2c, ~1), "9,I,d", 0, v9 },
-{ "movl",      F3(2, 0x2c, 0)|MCOND(CONDL,1)|ICC, F3(~2, ~0x2c, ~0)|MCOND(~CONDL,~1)|XCC|(1<<12), "z,2,d", 0, v9 },
-{ "movl",      F3(2, 0x2c, 1)|MCOND(CONDL,1)|ICC, F3(~2, ~0x2c, ~1)|MCOND(~CONDL,~1)|XCC|(1<<12), "z,I,d", 0, v9 },
-{ "movl",      F3(2, 0x2c, 0)|MCOND(CONDL,1)|XCC, F3(~2, ~0x2c, ~0)|MCOND(~CONDL,~1)|(1<<12), "Z,2,d", 0, v9 },
-{ "movl",      F3(2, 0x2c, 1)|MCOND(CONDL,1)|XCC, F3(~2, ~0x2c, ~1)|MCOND(~CONDL,~1)|(1<<12), "Z,I,d", 0, v9 },
-{ "movle",     F3(2, 0x2c, 0)|FCC(0)|MCOND(FCONDLE,0), MCOND(~FCONDLE,~0)|FCC(~0)|F3(~2, ~0x2c, ~0), "6,2,d", 0, v9 },
-{ "movle",     F3(2, 0x2c, 1)|FCC(0)|MCOND(FCONDLE,0), MCOND(~FCONDLE,~0)|FCC(~0)|F3(~2, ~0x2c, ~1), "6,I,d", 0, v9 },
-{ "movle",     F3(2, 0x2c, 0)|FCC(1)|MCOND(FCONDLE,0), MCOND(~FCONDLE,~0)|FCC(~1)|F3(~2, ~0x2c, ~0), "7,2,d", 0, v9 },
-{ "movle",     F3(2, 0x2c, 1)|FCC(1)|MCOND(FCONDLE,0), MCOND(~FCONDLE,~0)|FCC(~1)|F3(~2, ~0x2c, ~1), "7,I,d", 0, v9 },
-{ "movle",     F3(2, 0x2c, 0)|FCC(2)|MCOND(FCONDLE,0), MCOND(~FCONDLE,~0)|FCC(~2)|F3(~2, ~0x2c, ~0), "8,2,d", 0, v9 },
-{ "movle",     F3(2, 0x2c, 1)|FCC(2)|MCOND(FCONDLE,0), MCOND(~FCONDLE,~0)|FCC(~2)|F3(~2, ~0x2c, ~1), "8,I,d", 0, v9 },
-{ "movle",     F3(2, 0x2c, 0)|FCC(3)|MCOND(FCONDLE,0), MCOND(~FCONDLE,~0)|FCC(~3)|F3(~2, ~0x2c, ~0), "9,2,d", 0, v9 },
-{ "movle",     F3(2, 0x2c, 1)|FCC(3)|MCOND(FCONDLE,0), MCOND(~FCONDLE,~0)|FCC(~3)|F3(~2, ~0x2c, ~1), "9,I,d", 0, v9 },
-{ "movle",     F3(2, 0x2c, 0)|MCOND(CONDLE,1)|ICC, F3(~2, ~0x2c, ~0)|MCOND(~CONDLE,~1)|XCC|(1<<12), "z,2,d", 0, v9 },
-{ "movle",     F3(2, 0x2c, 1)|MCOND(CONDLE,1)|ICC, F3(~2, ~0x2c, ~1)|MCOND(~CONDLE,~1)|XCC|(1<<12), "z,I,d", 0, v9 },
-{ "movle",     F3(2, 0x2c, 0)|MCOND(CONDLE,1)|XCC, F3(~2, ~0x2c, ~0)|MCOND(~CONDLE,~1)|(1<<12), "Z,2,d", 0, v9 },
-{ "movle",     F3(2, 0x2c, 1)|MCOND(CONDLE,1)|XCC, F3(~2, ~0x2c, ~1)|MCOND(~CONDLE,~1)|(1<<12), "Z,I,d", 0, v9 },
-{ "movleu",    F3(2, 0x2c, 0)|MCOND(CONDLEU,1)|ICC, F3(~2, ~0x2c, ~0)|MCOND(~CONDLEU,~1)|XCC|(1<<12), "z,2,d", 0, v9 },
-{ "movleu",    F3(2, 0x2c, 1)|MCOND(CONDLEU,1)|ICC, F3(~2, ~0x2c, ~1)|MCOND(~CONDLEU,~1)|XCC|(1<<12), "z,I,d", 0, v9 },
-{ "movleu",    F3(2, 0x2c, 0)|MCOND(CONDLEU,1)|XCC, F3(~2, ~0x2c, ~0)|MCOND(~CONDLEU,~1)|(1<<12), "Z,2,d", 0, v9 },
-{ "movleu",    F3(2, 0x2c, 1)|MCOND(CONDLEU,1)|XCC, F3(~2, ~0x2c, ~1)|MCOND(~CONDLEU,~1)|(1<<12), "Z,I,d", 0, v9 },
-{ "movlg",     F3(2, 0x2c, 0)|FCC(0)|MCOND(FCONDLG,0), MCOND(~FCONDLG,~0)|FCC(~0)|F3(~2, ~0x2c, ~0), "6,2,d", 0, v9 },
-{ "movlg",     F3(2, 0x2c, 1)|FCC(0)|MCOND(FCONDLG,0), MCOND(~FCONDLG,~0)|FCC(~0)|F3(~2, ~0x2c, ~1), "6,I,d", 0, v9 },
-{ "movlg",     F3(2, 0x2c, 0)|FCC(1)|MCOND(FCONDLG,0), MCOND(~FCONDLG,~0)|FCC(~1)|F3(~2, ~0x2c, ~0), "7,2,d", 0, v9 },
-{ "movlg",     F3(2, 0x2c, 1)|FCC(1)|MCOND(FCONDLG,0), MCOND(~FCONDLG,~0)|FCC(~1)|F3(~2, ~0x2c, ~1), "7,I,d", 0, v9 },
-{ "movlg",     F3(2, 0x2c, 0)|FCC(2)|MCOND(FCONDLG,0), MCOND(~FCONDLG,~0)|FCC(~2)|F3(~2, ~0x2c, ~0), "8,2,d", 0, v9 },
-{ "movlg",     F3(2, 0x2c, 1)|FCC(2)|MCOND(FCONDLG,0), MCOND(~FCONDLG,~0)|FCC(~2)|F3(~2, ~0x2c, ~1), "8,I,d", 0, v9 },
-{ "movlg",     F3(2, 0x2c, 0)|FCC(3)|MCOND(FCONDLG,0), MCOND(~FCONDLG,~0)|FCC(~3)|F3(~2, ~0x2c, ~0), "9,2,d", 0, v9 },
-{ "movlg",     F3(2, 0x2c, 1)|FCC(3)|MCOND(FCONDLG,0), MCOND(~FCONDLG,~0)|FCC(~3)|F3(~2, ~0x2c, ~1), "9,I,d", 0, v9 },
-{ "movn",      F3(2, 0x2c, 0)|FCC(0)|MCOND(FCONDN,0), MCOND(~FCONDN,~0)|FCC(~0)|F3(~2, ~0x2c, ~0), "6,2,d", 0, v9 },
-{ "movn",      F3(2, 0x2c, 1)|FCC(0)|MCOND(FCONDN,0), MCOND(~FCONDN,~0)|FCC(~0)|F3(~2, ~0x2c, ~1), "6,I,d", 0, v9 },
-{ "movn",      F3(2, 0x2c, 0)|FCC(1)|MCOND(FCONDN,0), MCOND(~FCONDN,~0)|FCC(~1)|F3(~2, ~0x2c, ~0), "7,2,d", 0, v9 },
-{ "movn",      F3(2, 0x2c, 1)|FCC(1)|MCOND(FCONDN,0), MCOND(~FCONDN,~0)|FCC(~1)|F3(~2, ~0x2c, ~1), "7,I,d", 0, v9 },
-{ "movn",      F3(2, 0x2c, 0)|FCC(2)|MCOND(FCONDN,0), MCOND(~FCONDN,~0)|FCC(~2)|F3(~2, ~0x2c, ~0), "8,2,d", 0, v9 },
-{ "movn",      F3(2, 0x2c, 1)|FCC(2)|MCOND(FCONDN,0), MCOND(~FCONDN,~0)|FCC(~2)|F3(~2, ~0x2c, ~1), "8,I,d", 0, v9 },
-{ "movn",      F3(2, 0x2c, 0)|FCC(3)|MCOND(FCONDN,0), MCOND(~FCONDN,~0)|FCC(~3)|F3(~2, ~0x2c, ~0), "9,2,d", 0, v9 },
-{ "movn",      F3(2, 0x2c, 1)|FCC(3)|MCOND(FCONDN,0), MCOND(~FCONDN,~0)|FCC(~3)|F3(~2, ~0x2c, ~1), "9,I,d", 0, v9 },
-{ "movn",      F3(2, 0x2c, 0)|MCOND(CONDN,1)|ICC, F3(~2, ~0x2c, ~0)|MCOND(~CONDN,~1)|XCC|(1<<12), "z,2,d", 0, v9 },
-{ "movn",      F3(2, 0x2c, 1)|MCOND(CONDN,1)|ICC, F3(~2, ~0x2c, ~1)|MCOND(~CONDN,~1)|XCC|(1<<12), "z,I,d", 0, v9 },
-{ "movn",      F3(2, 0x2c, 0)|MCOND(CONDN,1)|XCC, F3(~2, ~0x2c, ~0)|MCOND(~CONDN,~1)|(1<<12), "Z,2,d", 0, v9 },
-{ "movn",      F3(2, 0x2c, 1)|MCOND(CONDN,1)|XCC, F3(~2, ~0x2c, ~1)|MCOND(~CONDN,~1)|(1<<12), "Z,I,d", 0, v9 },
-{ "movne",     F3(2, 0x2c, 0)|FCC(0)|MCOND(FCONDNE,0), MCOND(~FCONDNE,~0)|FCC(~0)|F3(~2, ~0x2c, ~0), "6,2,d", 0, v9 },
-{ "movne",     F3(2, 0x2c, 1)|FCC(0)|MCOND(FCONDNE,0), MCOND(~FCONDNE,~0)|FCC(~0)|F3(~2, ~0x2c, ~1), "6,I,d", 0, v9 },
-{ "movne",     F3(2, 0x2c, 0)|FCC(1)|MCOND(FCONDNE,0), MCOND(~FCONDNE,~0)|FCC(~1)|F3(~2, ~0x2c, ~0), "7,2,d", 0, v9 },
-{ "movne",     F3(2, 0x2c, 1)|FCC(1)|MCOND(FCONDNE,0), MCOND(~FCONDNE,~0)|FCC(~1)|F3(~2, ~0x2c, ~1), "7,I,d", 0, v9 },
-{ "movne",     F3(2, 0x2c, 0)|FCC(2)|MCOND(FCONDNE,0), MCOND(~FCONDNE,~0)|FCC(~2)|F3(~2, ~0x2c, ~0), "8,2,d", 0, v9 },
-{ "movne",     F3(2, 0x2c, 1)|FCC(2)|MCOND(FCONDNE,0), MCOND(~FCONDNE,~0)|FCC(~2)|F3(~2, ~0x2c, ~1), "8,I,d", 0, v9 },
-{ "movne",     F3(2, 0x2c, 0)|FCC(3)|MCOND(FCONDNE,0), MCOND(~FCONDNE,~0)|FCC(~3)|F3(~2, ~0x2c, ~0), "9,2,d", 0, v9 },
-{ "movne",     F3(2, 0x2c, 1)|FCC(3)|MCOND(FCONDNE,0), MCOND(~FCONDNE,~0)|FCC(~3)|F3(~2, ~0x2c, ~1), "9,I,d", 0, v9 },
-{ "movne",     F3(2, 0x2c, 0)|MCOND(CONDNE,1)|ICC, F3(~2, ~0x2c, ~0)|MCOND(~CONDNE,~1)|XCC|(1<<12), "z,2,d", 0, v9 },
-{ "movne",     F3(2, 0x2c, 1)|MCOND(CONDNE,1)|ICC, F3(~2, ~0x2c, ~1)|MCOND(~CONDNE,~1)|XCC|(1<<12), "z,I,d", 0, v9 },
-{ "movne",     F3(2, 0x2c, 0)|MCOND(CONDNE,1)|XCC, F3(~2, ~0x2c, ~0)|MCOND(~CONDNE,~1)|(1<<12), "Z,2,d", 0, v9 },
-{ "movne",     F3(2, 0x2c, 1)|MCOND(CONDNE,1)|XCC, F3(~2, ~0x2c, ~1)|MCOND(~CONDNE,~1)|(1<<12), "Z,I,d", 0, v9 },
-{ "movneg",    F3(2, 0x2c, 0)|MCOND(CONDNEG,1)|ICC, F3(~2, ~0x2c, ~0)|MCOND(~CONDNEG,~1)|XCC|(1<<12), "z,2,d", 0, v9 },
-{ "movneg",    F3(2, 0x2c, 1)|MCOND(CONDNEG,1)|ICC, F3(~2, ~0x2c, ~1)|MCOND(~CONDNEG,~1)|XCC|(1<<12), "z,I,d", 0, v9 },
-{ "movneg",    F3(2, 0x2c, 0)|MCOND(CONDNEG,1)|XCC, F3(~2, ~0x2c, ~0)|MCOND(~CONDNEG,~1)|(1<<12), "Z,2,d", 0, v9 },
-{ "movneg",    F3(2, 0x2c, 1)|MCOND(CONDNEG,1)|XCC, F3(~2, ~0x2c, ~1)|MCOND(~CONDNEG,~1)|(1<<12), "Z,I,d", 0, v9 },
-{ "movnz",     F3(2, 0x2c, 0)|FCC(0)|MCOND(FCONDNZ,0), MCOND(~FCONDNZ,~0)|FCC(~0)|F3(~2, ~0x2c, ~0), "6,2,d", F_ALIAS, v9 },
-{ "movnz",     F3(2, 0x2c, 1)|FCC(0)|MCOND(FCONDNZ,0), MCOND(~FCONDNZ,~0)|FCC(~0)|F3(~2, ~0x2c, ~1), "6,I,d", F_ALIAS, v9 },
-{ "movnz",     F3(2, 0x2c, 0)|FCC(1)|MCOND(FCONDNZ,0), MCOND(~FCONDNZ,~0)|FCC(~1)|F3(~2, ~0x2c, ~0), "7,2,d", F_ALIAS, v9 },
-{ "movnz",     F3(2, 0x2c, 1)|FCC(1)|MCOND(FCONDNZ,0), MCOND(~FCONDNZ,~0)|FCC(~1)|F3(~2, ~0x2c, ~1), "7,I,d", F_ALIAS, v9 },
-{ "movnz",     F3(2, 0x2c, 0)|FCC(2)|MCOND(FCONDNZ,0), MCOND(~FCONDNZ,~0)|FCC(~2)|F3(~2, ~0x2c, ~0), "8,2,d", F_ALIAS, v9 },
-{ "movnz",     F3(2, 0x2c, 1)|FCC(2)|MCOND(FCONDNZ,0), MCOND(~FCONDNZ,~0)|FCC(~2)|F3(~2, ~0x2c, ~1), "8,I,d", F_ALIAS, v9 },
-{ "movnz",     F3(2, 0x2c, 0)|FCC(3)|MCOND(FCONDNZ,0), MCOND(~FCONDNZ,~0)|FCC(~3)|F3(~2, ~0x2c, ~0), "9,2,d", F_ALIAS, v9 },
-{ "movnz",     F3(2, 0x2c, 1)|FCC(3)|MCOND(FCONDNZ,0), MCOND(~FCONDNZ,~0)|FCC(~3)|F3(~2, ~0x2c, ~1), "9,I,d", F_ALIAS, v9 },
-{ "movo",      F3(2, 0x2c, 0)|FCC(0)|MCOND(FCONDO,0), MCOND(~FCONDO,~0)|FCC(~0)|F3(~2, ~0x2c, ~0), "6,2,d", 0, v9 },
-{ "movo",      F3(2, 0x2c, 1)|FCC(0)|MCOND(FCONDO,0), MCOND(~FCONDO,~0)|FCC(~0)|F3(~2, ~0x2c, ~1), "6,I,d", 0, v9 },
-{ "movo",      F3(2, 0x2c, 0)|FCC(1)|MCOND(FCONDO,0), MCOND(~FCONDO,~0)|FCC(~1)|F3(~2, ~0x2c, ~0), "7,2,d", 0, v9 },
-{ "movo",      F3(2, 0x2c, 1)|FCC(1)|MCOND(FCONDO,0), MCOND(~FCONDO,~0)|FCC(~1)|F3(~2, ~0x2c, ~1), "7,I,d", 0, v9 },
-{ "movo",      F3(2, 0x2c, 0)|FCC(2)|MCOND(FCONDO,0), MCOND(~FCONDO,~0)|FCC(~2)|F3(~2, ~0x2c, ~0), "8,2,d", 0, v9 },
-{ "movo",      F3(2, 0x2c, 1)|FCC(2)|MCOND(FCONDO,0), MCOND(~FCONDO,~0)|FCC(~2)|F3(~2, ~0x2c, ~1), "8,I,d", 0, v9 },
-{ "movo",      F3(2, 0x2c, 0)|FCC(3)|MCOND(FCONDO,0), MCOND(~FCONDO,~0)|FCC(~3)|F3(~2, ~0x2c, ~0), "9,2,d", 0, v9 },
-{ "movo",      F3(2, 0x2c, 1)|FCC(3)|MCOND(FCONDO,0), MCOND(~FCONDO,~0)|FCC(~3)|F3(~2, ~0x2c, ~1), "9,I,d", 0, v9 },
-{ "movpos",    F3(2, 0x2c, 0)|MCOND(CONDPOS,1)|ICC, F3(~2, ~0x2c, ~0)|MCOND(~CONDPOS,~1)|XCC|(1<<12), "z,2,d", 0, v9 },
-{ "movpos",    F3(2, 0x2c, 1)|MCOND(CONDPOS,1)|ICC, F3(~2, ~0x2c, ~1)|MCOND(~CONDPOS,~1)|XCC|(1<<12), "z,I,d", 0, v9 },
-{ "movpos",    F3(2, 0x2c, 0)|MCOND(CONDPOS,1)|XCC, F3(~2, ~0x2c, ~0)|MCOND(~CONDPOS,~1)|(1<<12), "Z,2,d", 0, v9 },
-{ "movpos",    F3(2, 0x2c, 1)|MCOND(CONDPOS,1)|XCC, F3(~2, ~0x2c, ~1)|MCOND(~CONDPOS,~1)|(1<<12), "Z,I,d", 0, v9 },
-{ "movu",      F3(2, 0x2c, 0)|FCC(0)|MCOND(FCONDU,0), MCOND(~FCONDU,~0)|FCC(~0)|F3(~2, ~0x2c, ~0), "6,2,d", 0, v9 },
-{ "movu",      F3(2, 0x2c, 1)|FCC(0)|MCOND(FCONDU,0), MCOND(~FCONDU,~0)|FCC(~0)|F3(~2, ~0x2c, ~1), "6,I,d", 0, v9 },
-{ "movu",      F3(2, 0x2c, 0)|FCC(1)|MCOND(FCONDU,0), MCOND(~FCONDU,~0)|FCC(~1)|F3(~2, ~0x2c, ~0), "7,2,d", 0, v9 },
-{ "movu",      F3(2, 0x2c, 1)|FCC(1)|MCOND(FCONDU,0), MCOND(~FCONDU,~0)|FCC(~1)|F3(~2, ~0x2c, ~1), "7,I,d", 0, v9 },
-{ "movu",      F3(2, 0x2c, 0)|FCC(2)|MCOND(FCONDU,0), MCOND(~FCONDU,~0)|FCC(~2)|F3(~2, ~0x2c, ~0), "8,2,d", 0, v9 },
-{ "movu",      F3(2, 0x2c, 1)|FCC(2)|MCOND(FCONDU,0), MCOND(~FCONDU,~0)|FCC(~2)|F3(~2, ~0x2c, ~1), "8,I,d", 0, v9 },
-{ "movu",      F3(2, 0x2c, 0)|FCC(3)|MCOND(FCONDU,0), MCOND(~FCONDU,~0)|FCC(~3)|F3(~2, ~0x2c, ~0), "9,2,d", 0, v9 },
-{ "movu",      F3(2, 0x2c, 1)|FCC(3)|MCOND(FCONDU,0), MCOND(~FCONDU,~0)|FCC(~3)|F3(~2, ~0x2c, ~1), "9,I,d", 0, v9 },
-{ "movue",     F3(2, 0x2c, 0)|FCC(0)|MCOND(FCONDUE,0), MCOND(~FCONDUE,~0)|FCC(~0)|F3(~2, ~0x2c, ~0), "6,2,d", 0, v9 },
-{ "movue",     F3(2, 0x2c, 1)|FCC(0)|MCOND(FCONDUE,0), MCOND(~FCONDUE,~0)|FCC(~0)|F3(~2, ~0x2c, ~1), "6,I,d", 0, v9 },
-{ "movue",     F3(2, 0x2c, 0)|FCC(1)|MCOND(FCONDUE,0), MCOND(~FCONDUE,~0)|FCC(~1)|F3(~2, ~0x2c, ~0), "7,2,d", 0, v9 },
-{ "movue",     F3(2, 0x2c, 1)|FCC(1)|MCOND(FCONDUE,0), MCOND(~FCONDUE,~0)|FCC(~1)|F3(~2, ~0x2c, ~1), "7,I,d", 0, v9 },
-{ "movue",     F3(2, 0x2c, 0)|FCC(2)|MCOND(FCONDUE,0), MCOND(~FCONDUE,~0)|FCC(~2)|F3(~2, ~0x2c, ~0), "8,2,d", 0, v9 },
-{ "movue",     F3(2, 0x2c, 1)|FCC(2)|MCOND(FCONDUE,0), MCOND(~FCONDUE,~0)|FCC(~2)|F3(~2, ~0x2c, ~1), "8,I,d", 0, v9 },
-{ "movue",     F3(2, 0x2c, 0)|FCC(3)|MCOND(FCONDUE,0), MCOND(~FCONDUE,~0)|FCC(~3)|F3(~2, ~0x2c, ~0), "9,2,d", 0, v9 },
-{ "movue",     F3(2, 0x2c, 1)|FCC(3)|MCOND(FCONDUE,0), MCOND(~FCONDUE,~0)|FCC(~3)|F3(~2, ~0x2c, ~1), "9,I,d", 0, v9 },
-{ "movug",     F3(2, 0x2c, 0)|FCC(0)|MCOND(FCONDUG,0), MCOND(~FCONDUG,~0)|FCC(~0)|F3(~2, ~0x2c, ~0), "6,2,d", 0, v9 },
-{ "movug",     F3(2, 0x2c, 1)|FCC(0)|MCOND(FCONDUG,0), MCOND(~FCONDUG,~0)|FCC(~0)|F3(~2, ~0x2c, ~1), "6,I,d", 0, v9 },
-{ "movug",     F3(2, 0x2c, 0)|FCC(1)|MCOND(FCONDUG,0), MCOND(~FCONDUG,~0)|FCC(~1)|F3(~2, ~0x2c, ~0), "7,2,d", 0, v9 },
-{ "movug",     F3(2, 0x2c, 1)|FCC(1)|MCOND(FCONDUG,0), MCOND(~FCONDUG,~0)|FCC(~1)|F3(~2, ~0x2c, ~1), "7,I,d", 0, v9 },
-{ "movug",     F3(2, 0x2c, 0)|FCC(2)|MCOND(FCONDUG,0), MCOND(~FCONDUG,~0)|FCC(~2)|F3(~2, ~0x2c, ~0), "8,2,d", 0, v9 },
-{ "movug",     F3(2, 0x2c, 1)|FCC(2)|MCOND(FCONDUG,0), MCOND(~FCONDUG,~0)|FCC(~2)|F3(~2, ~0x2c, ~1), "8,I,d", 0, v9 },
-{ "movug",     F3(2, 0x2c, 0)|FCC(3)|MCOND(FCONDUG,0), MCOND(~FCONDUG,~0)|FCC(~3)|F3(~2, ~0x2c, ~0), "9,2,d", 0, v9 },
-{ "movug",     F3(2, 0x2c, 1)|FCC(3)|MCOND(FCONDUG,0), MCOND(~FCONDUG,~0)|FCC(~3)|F3(~2, ~0x2c, ~1), "9,I,d", 0, v9 },
-{ "movuge",    F3(2, 0x2c, 0)|FCC(0)|MCOND(FCONDUGE,0), MCOND(~FCONDUGE,~0)|FCC(~0)|F3(~2, ~0x2c, ~0), "6,2,d", 0, v9 },
-{ "movuge",    F3(2, 0x2c, 1)|FCC(0)|MCOND(FCONDUGE,0), MCOND(~FCONDUGE,~0)|FCC(~0)|F3(~2, ~0x2c, ~1), "6,I,d", 0, v9 },
-{ "movuge",    F3(2, 0x2c, 0)|FCC(1)|MCOND(FCONDUGE,0), MCOND(~FCONDUGE,~0)|FCC(~1)|F3(~2, ~0x2c, ~0), "7,2,d", 0, v9 },
-{ "movuge",    F3(2, 0x2c, 1)|FCC(1)|MCOND(FCONDUGE,0), MCOND(~FCONDUGE,~0)|FCC(~1)|F3(~2, ~0x2c, ~1), "7,I,d", 0, v9 },
-{ "movuge",    F3(2, 0x2c, 0)|FCC(2)|MCOND(FCONDUGE,0), MCOND(~FCONDUGE,~0)|FCC(~2)|F3(~2, ~0x2c, ~0), "8,2,d", 0, v9 },
-{ "movuge",    F3(2, 0x2c, 1)|FCC(2)|MCOND(FCONDUGE,0), MCOND(~FCONDUGE,~0)|FCC(~2)|F3(~2, ~0x2c, ~1), "8,I,d", 0, v9 },
-{ "movuge",    F3(2, 0x2c, 0)|FCC(3)|MCOND(FCONDUGE,0), MCOND(~FCONDUGE,~0)|FCC(~3)|F3(~2, ~0x2c, ~0), "9,2,d", 0, v9 },
-{ "movuge",    F3(2, 0x2c, 1)|FCC(3)|MCOND(FCONDUGE,0), MCOND(~FCONDUGE,~0)|FCC(~3)|F3(~2, ~0x2c, ~1), "9,I,d", 0, v9 },
-{ "movul",     F3(2, 0x2c, 0)|FCC(0)|MCOND(FCONDUL,0), MCOND(~FCONDUL,~0)|FCC(~0)|F3(~2, ~0x2c, ~0), "6,2,d", 0, v9 },
-{ "movul",     F3(2, 0x2c, 1)|FCC(0)|MCOND(FCONDUL,0), MCOND(~FCONDUL,~0)|FCC(~0)|F3(~2, ~0x2c, ~1), "6,I,d", 0, v9 },
-{ "movul",     F3(2, 0x2c, 0)|FCC(1)|MCOND(FCONDUL,0), MCOND(~FCONDUL,~0)|FCC(~1)|F3(~2, ~0x2c, ~0), "7,2,d", 0, v9 },
-{ "movul",     F3(2, 0x2c, 1)|FCC(1)|MCOND(FCONDUL,0), MCOND(~FCONDUL,~0)|FCC(~1)|F3(~2, ~0x2c, ~1), "7,I,d", 0, v9 },
-{ "movul",     F3(2, 0x2c, 0)|FCC(2)|MCOND(FCONDUL,0), MCOND(~FCONDUL,~0)|FCC(~2)|F3(~2, ~0x2c, ~0), "8,2,d", 0, v9 },
-{ "movul",     F3(2, 0x2c, 1)|FCC(2)|MCOND(FCONDUL,0), MCOND(~FCONDUL,~0)|FCC(~2)|F3(~2, ~0x2c, ~1), "8,I,d", 0, v9 },
-{ "movul",     F3(2, 0x2c, 0)|FCC(3)|MCOND(FCONDUL,0), MCOND(~FCONDUL,~0)|FCC(~3)|F3(~2, ~0x2c, ~0), "9,2,d", 0, v9 },
-{ "movul",     F3(2, 0x2c, 1)|FCC(3)|MCOND(FCONDUL,0), MCOND(~FCONDUL,~0)|FCC(~3)|F3(~2, ~0x2c, ~1), "9,I,d", 0, v9 },
-{ "movule",    F3(2, 0x2c, 0)|FCC(0)|MCOND(FCONDULE,0), MCOND(~FCONDULE,~0)|FCC(~0)|F3(~2, ~0x2c, ~0), "6,2,d", 0, v9 },
-{ "movule",    F3(2, 0x2c, 1)|FCC(0)|MCOND(FCONDULE,0), MCOND(~FCONDULE,~0)|FCC(~0)|F3(~2, ~0x2c, ~1), "6,I,d", 0, v9 },
-{ "movule",    F3(2, 0x2c, 0)|FCC(1)|MCOND(FCONDULE,0), MCOND(~FCONDULE,~0)|FCC(~1)|F3(~2, ~0x2c, ~0), "7,2,d", 0, v9 },
-{ "movule",    F3(2, 0x2c, 1)|FCC(1)|MCOND(FCONDULE,0), MCOND(~FCONDULE,~0)|FCC(~1)|F3(~2, ~0x2c, ~1), "7,I,d", 0, v9 },
-{ "movule",    F3(2, 0x2c, 0)|FCC(2)|MCOND(FCONDULE,0), MCOND(~FCONDULE,~0)|FCC(~2)|F3(~2, ~0x2c, ~0), "8,2,d", 0, v9 },
-{ "movule",    F3(2, 0x2c, 1)|FCC(2)|MCOND(FCONDULE,0), MCOND(~FCONDULE,~0)|FCC(~2)|F3(~2, ~0x2c, ~1), "8,I,d", 0, v9 },
-{ "movule",    F3(2, 0x2c, 0)|FCC(3)|MCOND(FCONDULE,0), MCOND(~FCONDULE,~0)|FCC(~3)|F3(~2, ~0x2c, ~0), "9,2,d", 0, v9 },
-{ "movule",    F3(2, 0x2c, 1)|FCC(3)|MCOND(FCONDULE,0), MCOND(~FCONDULE,~0)|FCC(~3)|F3(~2, ~0x2c, ~1), "9,I,d", 0, v9 },
-{ "movvc",     F3(2, 0x2c, 0)|MCOND(CONDVC,1)|ICC, F3(~2, ~0x2c, ~0)|MCOND(~CONDVC,~1)|XCC|(1<<12), "z,2,d", 0, v9 },
-{ "movvc",     F3(2, 0x2c, 1)|MCOND(CONDVC,1)|ICC, F3(~2, ~0x2c, ~1)|MCOND(~CONDVC,~1)|XCC|(1<<12), "z,I,d", 0, v9 },
-{ "movvc",     F3(2, 0x2c, 0)|MCOND(CONDVC,1)|XCC, F3(~2, ~0x2c, ~0)|MCOND(~CONDVC,~1)|(1<<12), "Z,2,d", 0, v9 },
-{ "movvc",     F3(2, 0x2c, 1)|MCOND(CONDVC,1)|XCC, F3(~2, ~0x2c, ~1)|MCOND(~CONDVC,~1)|(1<<12), "Z,I,d", 0, v9 },
-{ "movvs",     F3(2, 0x2c, 0)|MCOND(CONDVS,1)|ICC, F3(~2, ~0x2c, ~0)|MCOND(~CONDVS,~1)|XCC|(1<<12), "z,2,d", 0, v9 },
-{ "movvs",     F3(2, 0x2c, 1)|MCOND(CONDVS,1)|ICC, F3(~2, ~0x2c, ~1)|MCOND(~CONDVS,~1)|XCC|(1<<12), "z,I,d", 0, v9 },
-{ "movvs",     F3(2, 0x2c, 0)|MCOND(CONDVS,1)|XCC, F3(~2, ~0x2c, ~0)|MCOND(~CONDVS,~1)|(1<<12), "Z,2,d", 0, v9 },
-{ "movvs",     F3(2, 0x2c, 1)|MCOND(CONDVS,1)|XCC, F3(~2, ~0x2c, ~1)|MCOND(~CONDVS,~1)|(1<<12), "Z,I,d", 0, v9 },
-{ "movz",      F3(2, 0x2c, 0)|FCC(0)|MCOND(FCONDZ,0), MCOND(~FCONDZ,~0)|FCC(~0)|F3(~2, ~0x2c, ~0), "6,2,d", F_ALIAS, v9 },
-{ "movz",      F3(2, 0x2c, 1)|FCC(0)|MCOND(FCONDZ,0), MCOND(~FCONDZ,~0)|FCC(~0)|F3(~2, ~0x2c, ~1), "6,I,d", F_ALIAS, v9 },
-{ "movz",      F3(2, 0x2c, 0)|FCC(1)|MCOND(FCONDZ,0), MCOND(~FCONDZ,~0)|FCC(~1)|F3(~2, ~0x2c, ~0), "7,2,d", F_ALIAS, v9 },
-{ "movz",      F3(2, 0x2c, 1)|FCC(1)|MCOND(FCONDZ,0), MCOND(~FCONDZ,~0)|FCC(~1)|F3(~2, ~0x2c, ~1), "7,I,d", F_ALIAS, v9 },
-{ "movz",      F3(2, 0x2c, 0)|FCC(2)|MCOND(FCONDZ,0), MCOND(~FCONDZ,~0)|FCC(~2)|F3(~2, ~0x2c, ~0), "8,2,d", F_ALIAS, v9 },
-{ "movz",      F3(2, 0x2c, 1)|FCC(2)|MCOND(FCONDZ,0), MCOND(~FCONDZ,~0)|FCC(~2)|F3(~2, ~0x2c, ~1), "8,I,d", F_ALIAS, v9 },
-{ "movz",      F3(2, 0x2c, 0)|FCC(3)|MCOND(FCONDZ,0), MCOND(~FCONDZ,~0)|FCC(~3)|F3(~2, ~0x2c, ~0), "9,2,d", F_ALIAS, v9 },
-{ "movz",      F3(2, 0x2c, 1)|FCC(3)|MCOND(FCONDZ,0), MCOND(~FCONDZ,~0)|FCC(~3)|F3(~2, ~0x2c, ~1), "9,I,d", F_ALIAS, v9 },
-
-{ "fmovad",    F3F(2, 0x35, 0x102)|MCOND(CONDA,0),  F3F(~2, ~0x35, ~0x102)|MCOND(~CONDA,~0),   "z,f,g", 0, v9 },
-{ "fmovad",    F3F(2, 0x35, 0x082)|MCOND(FCONDA,0), F3F(~2, ~0x35, ~0x082)|MCOND(~FCONDA,~0),  "6,f,g", 0, v9 },
-{ "fmovad",    F3F(2, 0x35, 0x182)|MCOND(CONDA,0),  F3F(~2, ~0x35, ~0x182)|MCOND(~CONDA,~0),   "Z,f,g", 0, v9 },
-{ "fmovad",    F3F(2, 0x35, 0x0a2)|MCOND(FCONDA,0), F3F(~2, ~0x35, ~0x0a2)|MCOND(~FCONDA,~0),  "7,f,g", 0, v9 },
-{ "fmovad",    F3F(2, 0x35, 0x0c2)|MCOND(FCONDA,0), F3F(~2, ~0x35, ~0x0c2)|MCOND(~FCONDA,~0),  "8,f,g", 0, v9 },
-{ "fmovad",    F3F(2, 0x35, 0x0e2)|MCOND(FCONDA,0), F3F(~2, ~0x35, ~0x0e2)|MCOND(~FCONDA,~0),  "9,f,g", 0, v9 },
-{ "fmovaq",    F3F(2, 0x35, 0x103)|MCOND(CONDA,0),  F3F(~2, ~0x35, ~0x103)|MCOND(~CONDA,~0),   "z,f,g", 0, v9 },
-{ "fmovaq",    F3F(2, 0x35, 0x083)|MCOND(FCONDA,0), F3F(~2, ~0x35, ~0x083)|MCOND(~FCONDA,~0),  "6,f,g", 0, v9 },
-{ "fmovaq",    F3F(2, 0x35, 0x183)|MCOND(CONDA,0),  F3F(~2, ~0x35, ~0x183)|MCOND(~CONDA,~0),   "Z,f,g", 0, v9 },
-{ "fmovaq",    F3F(2, 0x35, 0x0a3)|MCOND(FCONDA,0), F3F(~2, ~0x35, ~0x0a3)|MCOND(~FCONDA,~0),  "7,f,g", 0, v9 },
-{ "fmovaq",    F3F(2, 0x35, 0x0c3)|MCOND(FCONDA,0), F3F(~2, ~0x35, ~0x0c3)|MCOND(~FCONDA,~0),  "8,f,g", 0, v9 },
-{ "fmovaq",    F3F(2, 0x35, 0x0e3)|MCOND(FCONDA,0), F3F(~2, ~0x35, ~0x0e3)|MCOND(~FCONDA,~0),  "9,f,g", 0, v9 },
-{ "fmovas",    F3F(2, 0x35, 0x101)|MCOND(CONDA,0),  F3F(~2, ~0x35, ~0x101)|MCOND(~CONDA,~0),   "z,f,g", 0, v9 },
-{ "fmovas",    F3F(2, 0x35, 0x081)|MCOND(FCONDA,0), F3F(~2, ~0x35, ~0x081)|MCOND(~FCONDA,~0),  "6,f,g", 0, v9 },
-{ "fmovas",    F3F(2, 0x35, 0x181)|MCOND(CONDA,0),  F3F(~2, ~0x35, ~0x181)|MCOND(~CONDA,~0),   "Z,f,g", 0, v9 },
-{ "fmovas",    F3F(2, 0x35, 0x0a1)|MCOND(FCONDA,0), F3F(~2, ~0x35, ~0x0a1)|MCOND(~FCONDA,~0),  "7,f,g", 0, v9 },
-{ "fmovas",    F3F(2, 0x35, 0x0c1)|MCOND(FCONDA,0), F3F(~2, ~0x35, ~0x0c1)|MCOND(~FCONDA,~0),  "8,f,g", 0, v9 },
-{ "fmovas",    F3F(2, 0x35, 0x0e1)|MCOND(FCONDA,0), F3F(~2, ~0x35, ~0x0e1)|MCOND(~FCONDA,~0),  "9,f,g", 0, v9 },
-{ "fmovccd",   F3F(2, 0x35, 0x102)|MCOND(CONDCC,0), F3F(~2, ~0x35, ~0x102)|MCOND(~CONDCC,~0),  "z,f,g", 0, v9 },
-{ "fmovccd",   F3F(2, 0x35, 0x182)|MCOND(CONDCC,0), F3F(~2, ~0x35, ~0x182)|MCOND(~CONDCC,~0),  "Z,f,g", 0, v9 },
-{ "fmovccq",   F3F(2, 0x35, 0x103)|MCOND(CONDCC,0), F3F(~2, ~0x35, ~0x103)|MCOND(~CONDCC,~0),  "z,f,g", 0, v9 },
-{ "fmovccq",   F3F(2, 0x35, 0x183)|MCOND(CONDCC,0), F3F(~2, ~0x35, ~0x183)|MCOND(~CONDCC,~0),  "Z,f,g", 0, v9 },
-{ "fmovccs",   F3F(2, 0x35, 0x101)|MCOND(CONDCC,0), F3F(~2, ~0x35, ~0x101)|MCOND(~CONDCC,~0),  "z,f,g", 0, v9 },
-{ "fmovccs",   F3F(2, 0x35, 0x181)|MCOND(CONDCC,0), F3F(~2, ~0x35, ~0x181)|MCOND(~CONDCC,~0),  "Z,f,g", 0, v9 },
-{ "fmovcsd",   F3F(2, 0x35, 0x102)|MCOND(CONDCS,0), F3F(~2, ~0x35, ~0x102)|MCOND(~CONDCS,~0),  "z,f,g", 0, v9 },
-{ "fmovcsd",   F3F(2, 0x35, 0x182)|MCOND(CONDCS,0), F3F(~2, ~0x35, ~0x182)|MCOND(~CONDCS,~0),  "Z,f,g", 0, v9 },
-{ "fmovcsq",   F3F(2, 0x35, 0x103)|MCOND(CONDCS,0), F3F(~2, ~0x35, ~0x103)|MCOND(~CONDCS,~0),  "z,f,g", 0, v9 },
-{ "fmovcsq",   F3F(2, 0x35, 0x183)|MCOND(CONDCS,0), F3F(~2, ~0x35, ~0x183)|MCOND(~CONDCS,~0),  "Z,f,g", 0, v9 },
-{ "fmovcss",   F3F(2, 0x35, 0x101)|MCOND(CONDCS,0), F3F(~2, ~0x35, ~0x101)|MCOND(~CONDCS,~0),  "z,f,g", 0, v9 },
-{ "fmovcss",   F3F(2, 0x35, 0x181)|MCOND(CONDCS,0), F3F(~2, ~0x35, ~0x181)|MCOND(~CONDCS,~0),  "Z,f,g", 0, v9 },
-{ "fmoved",    F3F(2, 0x35, 0x102)|MCOND(CONDE,0),  F3F(~2, ~0x35, ~0x102)|MCOND(~CONDE,~0),   "z,f,g", 0, v9 },
-{ "fmoved",    F3F(2, 0x35, 0x082)|MCOND(FCONDE,0), F3F(~2, ~0x35, ~0x082)|MCOND(~FCONDE,~0),  "6,f,g", 0, v9 },
-{ "fmoved",    F3F(2, 0x35, 0x182)|MCOND(CONDE,0),  F3F(~2, ~0x35, ~0x182)|MCOND(~CONDE,~0),   "Z,f,g", 0, v9 },
-{ "fmoved",    F3F(2, 0x35, 0x0a2)|MCOND(FCONDE,0), F3F(~2, ~0x35, ~0x0a2)|MCOND(~FCONDE,~0),  "7,f,g", 0, v9 },
-{ "fmoved",    F3F(2, 0x35, 0x0c2)|MCOND(FCONDE,0), F3F(~2, ~0x35, ~0x0c2)|MCOND(~FCONDE,~0),  "8,f,g", 0, v9 },
-{ "fmoved",    F3F(2, 0x35, 0x0e2)|MCOND(FCONDE,0), F3F(~2, ~0x35, ~0x0e2)|MCOND(~FCONDE,~0),  "9,f,g", 0, v9 },
-{ "fmoveq",    F3F(2, 0x35, 0x103)|MCOND(CONDE,0),  F3F(~2, ~0x35, ~0x103)|MCOND(~CONDE,~0),   "z,f,g", 0, v9 },
-{ "fmoveq",    F3F(2, 0x35, 0x083)|MCOND(FCONDE,0), F3F(~2, ~0x35, ~0x083)|MCOND(~FCONDE,~0),  "6,f,g", 0, v9 },
-{ "fmoveq",    F3F(2, 0x35, 0x183)|MCOND(CONDE,0),  F3F(~2, ~0x35, ~0x183)|MCOND(~CONDE,~0),   "Z,f,g", 0, v9 },
-{ "fmoveq",    F3F(2, 0x35, 0x0a3)|MCOND(FCONDE,0), F3F(~2, ~0x35, ~0x0a3)|MCOND(~FCONDE,~0),  "7,f,g", 0, v9 },
-{ "fmoveq",    F3F(2, 0x35, 0x0c3)|MCOND(FCONDE,0), F3F(~2, ~0x35, ~0x0c3)|MCOND(~FCONDE,~0),  "8,f,g", 0, v9 },
-{ "fmoveq",    F3F(2, 0x35, 0x0e3)|MCOND(FCONDE,0), F3F(~2, ~0x35, ~0x0e3)|MCOND(~FCONDE,~0),  "9,f,g", 0, v9 },
-{ "fmoves",    F3F(2, 0x35, 0x101)|MCOND(CONDE,0),  F3F(~2, ~0x35, ~0x101)|MCOND(~CONDE,~0),   "z,f,g", 0, v9 },
-{ "fmoves",    F3F(2, 0x35, 0x081)|MCOND(FCONDE,0), F3F(~2, ~0x35, ~0x081)|MCOND(~FCONDE,~0),  "6,f,g", 0, v9 },
-{ "fmoves",    F3F(2, 0x35, 0x181)|MCOND(CONDE,0),  F3F(~2, ~0x35, ~0x181)|MCOND(~CONDE,~0),   "Z,f,g", 0, v9 },
-{ "fmoves",    F3F(2, 0x35, 0x0a1)|MCOND(FCONDE,0), F3F(~2, ~0x35, ~0x0a1)|MCOND(~FCONDE,~0),  "7,f,g", 0, v9 },
-{ "fmoves",    F3F(2, 0x35, 0x0c1)|MCOND(FCONDE,0), F3F(~2, ~0x35, ~0x0c1)|MCOND(~FCONDE,~0),  "8,f,g", 0, v9 },
-{ "fmoves",    F3F(2, 0x35, 0x0e1)|MCOND(FCONDE,0), F3F(~2, ~0x35, ~0x0e1)|MCOND(~FCONDE,~0),  "9,f,g", 0, v9 },
-{ "fmovgd",    F3F(2, 0x35, 0x102)|MCOND(CONDG,0),  F3F(~2, ~0x35, ~0x102)|MCOND(~CONDG,~0),   "z,f,g", 0, v9 },
-{ "fmovgd",    F3F(2, 0x35, 0x082)|MCOND(FCONDG,0), F3F(~2, ~0x35, ~0x082)|MCOND(~FCONDG,~0),  "6,f,g", 0, v9 },
-{ "fmovgd",    F3F(2, 0x35, 0x182)|MCOND(CONDG,0),  F3F(~2, ~0x35, ~0x182)|MCOND(~CONDG,~0),   "Z,f,g", 0, v9 },
-{ "fmovgd",    F3F(2, 0x35, 0x0a2)|MCOND(FCONDG,0), F3F(~2, ~0x35, ~0x0a2)|MCOND(~FCONDG,~0),  "7,f,g", 0, v9 },
-{ "fmovgd",    F3F(2, 0x35, 0x0c2)|MCOND(FCONDG,0), F3F(~2, ~0x35, ~0x0c2)|MCOND(~FCONDG,~0),  "8,f,g", 0, v9 },
-{ "fmovgd",    F3F(2, 0x35, 0x0e2)|MCOND(FCONDG,0), F3F(~2, ~0x35, ~0x0e2)|MCOND(~FCONDG,~0),  "9,f,g", 0, v9 },
-{ "fmovged",   F3F(2, 0x35, 0x102)|MCOND(CONDGE,0), F3F(~2, ~0x35, ~0x102)|MCOND(~CONDGE,~0),  "z,f,g", 0, v9 },
-{ "fmovged",   F3F(2, 0x35, 0x082)|MCOND(FCONDGE,0), F3F(~2, ~0x35, ~0x082)|MCOND(~FCONDGE,~0),        "6,f,g", 0, v9 },
-{ "fmovged",   F3F(2, 0x35, 0x182)|MCOND(CONDGE,0), F3F(~2, ~0x35, ~0x182)|MCOND(~CONDGE,~0),  "Z,f,g", 0, v9 },
-{ "fmovged",   F3F(2, 0x35, 0x0a2)|MCOND(FCONDGE,0), F3F(~2, ~0x35, ~0x0a2)|MCOND(~FCONDGE,~0),        "7,f,g", 0, v9 },
-{ "fmovged",   F3F(2, 0x35, 0x0c2)|MCOND(FCONDGE,0), F3F(~2, ~0x35, ~0x0c2)|MCOND(~FCONDGE,~0),        "8,f,g", 0, v9 },
-{ "fmovged",   F3F(2, 0x35, 0x0e2)|MCOND(FCONDGE,0), F3F(~2, ~0x35, ~0x0e2)|MCOND(~FCONDGE,~0),        "9,f,g", 0, v9 },
-{ "fmovgeq",   F3F(2, 0x35, 0x103)|MCOND(CONDGE,0), F3F(~2, ~0x35, ~0x103)|MCOND(~CONDGE,~0),  "z,f,g", 0, v9 },
-{ "fmovgeq",   F3F(2, 0x35, 0x083)|MCOND(FCONDGE,0), F3F(~2, ~0x35, ~0x083)|MCOND(~FCONDGE,~0),        "6,f,g", 0, v9 },
-{ "fmovgeq",   F3F(2, 0x35, 0x183)|MCOND(CONDGE,0), F3F(~2, ~0x35, ~0x183)|MCOND(~CONDGE,~0),  "Z,f,g", 0, v9 },
-{ "fmovgeq",   F3F(2, 0x35, 0x0a3)|MCOND(FCONDGE,0), F3F(~2, ~0x35, ~0x0a3)|MCOND(~FCONDGE,~0),        "7,f,g", 0, v9 },
-{ "fmovgeq",   F3F(2, 0x35, 0x0c3)|MCOND(FCONDGE,0), F3F(~2, ~0x35, ~0x0c3)|MCOND(~FCONDGE,~0),        "8,f,g", 0, v9 },
-{ "fmovgeq",   F3F(2, 0x35, 0x0e3)|MCOND(FCONDGE,0), F3F(~2, ~0x35, ~0x0e3)|MCOND(~FCONDGE,~0),        "9,f,g", 0, v9 },
-{ "fmovges",   F3F(2, 0x35, 0x101)|MCOND(CONDGE,0), F3F(~2, ~0x35, ~0x101)|MCOND(~CONDGE,~0),  "z,f,g", 0, v9 },
-{ "fmovges",   F3F(2, 0x35, 0x081)|MCOND(FCONDGE,0), F3F(~2, ~0x35, ~0x081)|MCOND(~FCONDGE,~0),        "6,f,g", 0, v9 },
-{ "fmovges",   F3F(2, 0x35, 0x181)|MCOND(CONDGE,0), F3F(~2, ~0x35, ~0x181)|MCOND(~CONDGE,~0),  "Z,f,g", 0, v9 },
-{ "fmovges",   F3F(2, 0x35, 0x0a1)|MCOND(FCONDGE,0), F3F(~2, ~0x35, ~0x0a1)|MCOND(~FCONDGE,~0),        "7,f,g", 0, v9 },
-{ "fmovges",   F3F(2, 0x35, 0x0c1)|MCOND(FCONDGE,0), F3F(~2, ~0x35, ~0x0c1)|MCOND(~FCONDGE,~0),        "8,f,g", 0, v9 },
-{ "fmovges",   F3F(2, 0x35, 0x0e1)|MCOND(FCONDGE,0), F3F(~2, ~0x35, ~0x0e1)|MCOND(~FCONDGE,~0),        "9,f,g", 0, v9 },
-{ "fmovgeud",  F3F(2, 0x35, 0x102)|MCOND(CONDGEU,0), F3F(~2, ~0x35, ~0x102)|MCOND(~CONDGEU,~0),        "z,f,g", F_ALIAS, v9 },
-{ "fmovgeud",  F3F(2, 0x35, 0x182)|MCOND(CONDGEU,0), F3F(~2, ~0x35, ~0x182)|MCOND(~CONDGEU,~0),        "Z,f,g", F_ALIAS, v9 },
-{ "fmovgeuq",  F3F(2, 0x35, 0x103)|MCOND(CONDGEU,0), F3F(~2, ~0x35, ~0x103)|MCOND(~CONDGEU,~0),        "z,f,g", F_ALIAS, v9 },
-{ "fmovgeuq",  F3F(2, 0x35, 0x183)|MCOND(CONDGEU,0), F3F(~2, ~0x35, ~0x183)|MCOND(~CONDGEU,~0),        "Z,f,g", F_ALIAS, v9 },
-{ "fmovgeus",  F3F(2, 0x35, 0x101)|MCOND(CONDGEU,0), F3F(~2, ~0x35, ~0x101)|MCOND(~CONDGEU,~0),        "z,f,g", F_ALIAS, v9 },
-{ "fmovgeus",  F3F(2, 0x35, 0x181)|MCOND(CONDGEU,0), F3F(~2, ~0x35, ~0x181)|MCOND(~CONDGEU,~0),        "Z,f,g", F_ALIAS, v9 },
-{ "fmovgq",    F3F(2, 0x35, 0x103)|MCOND(CONDG,0),  F3F(~2, ~0x35, ~0x103)|MCOND(~CONDG,~0),   "z,f,g", 0, v9 },
-{ "fmovgq",    F3F(2, 0x35, 0x083)|MCOND(FCONDG,0), F3F(~2, ~0x35, ~0x083)|MCOND(~FCONDG,~0),  "6,f,g", 0, v9 },
-{ "fmovgq",    F3F(2, 0x35, 0x183)|MCOND(CONDG,0),  F3F(~2, ~0x35, ~0x183)|MCOND(~CONDG,~0),   "Z,f,g", 0, v9 },
-{ "fmovgq",    F3F(2, 0x35, 0x0a3)|MCOND(FCONDG,0), F3F(~2, ~0x35, ~0x0a3)|MCOND(~FCONDG,~0),  "7,f,g", 0, v9 },
-{ "fmovgq",    F3F(2, 0x35, 0x0c3)|MCOND(FCONDG,0), F3F(~2, ~0x35, ~0x0c3)|MCOND(~FCONDG,~0),  "8,f,g", 0, v9 },
-{ "fmovgq",    F3F(2, 0x35, 0x0e3)|MCOND(FCONDG,0), F3F(~2, ~0x35, ~0x0e3)|MCOND(~FCONDG,~0),  "9,f,g", 0, v9 },
-{ "fmovgs",    F3F(2, 0x35, 0x101)|MCOND(CONDG,0),  F3F(~2, ~0x35, ~0x101)|MCOND(~CONDG,~0),   "z,f,g", 0, v9 },
-{ "fmovgs",    F3F(2, 0x35, 0x081)|MCOND(FCONDG,0), F3F(~2, ~0x35, ~0x081)|MCOND(~FCONDG,~0),  "6,f,g", 0, v9 },
-{ "fmovgs",    F3F(2, 0x35, 0x181)|MCOND(CONDG,0),  F3F(~2, ~0x35, ~0x181)|MCOND(~CONDG,~0),   "Z,f,g", 0, v9 },
-{ "fmovgs",    F3F(2, 0x35, 0x0a1)|MCOND(FCONDG,0), F3F(~2, ~0x35, ~0x0a1)|MCOND(~FCONDG,~0),  "7,f,g", 0, v9 },
-{ "fmovgs",    F3F(2, 0x35, 0x0c1)|MCOND(FCONDG,0), F3F(~2, ~0x35, ~0x0c1)|MCOND(~FCONDG,~0),  "8,f,g", 0, v9 },
-{ "fmovgs",    F3F(2, 0x35, 0x0e1)|MCOND(FCONDG,0), F3F(~2, ~0x35, ~0x0e1)|MCOND(~FCONDG,~0),  "9,f,g", 0, v9 },
-{ "fmovgud",   F3F(2, 0x35, 0x102)|MCOND(CONDGU,0), F3F(~2, ~0x35, ~0x102)|MCOND(~CONDGU,~0),  "z,f,g", 0, v9 },
-{ "fmovgud",   F3F(2, 0x35, 0x182)|MCOND(CONDGU,0), F3F(~2, ~0x35, ~0x182)|MCOND(~CONDGU,~0),  "Z,f,g", 0, v9 },
-{ "fmovguq",   F3F(2, 0x35, 0x103)|MCOND(CONDGU,0), F3F(~2, ~0x35, ~0x103)|MCOND(~CONDGU,~0),  "z,f,g", 0, v9 },
-{ "fmovguq",   F3F(2, 0x35, 0x183)|MCOND(CONDGU,0), F3F(~2, ~0x35, ~0x183)|MCOND(~CONDGU,~0),  "Z,f,g", 0, v9 },
-{ "fmovgus",   F3F(2, 0x35, 0x101)|MCOND(CONDGU,0), F3F(~2, ~0x35, ~0x101)|MCOND(~CONDGU,~0),  "z,f,g", 0, v9 },
-{ "fmovgus",   F3F(2, 0x35, 0x181)|MCOND(CONDGU,0), F3F(~2, ~0x35, ~0x181)|MCOND(~CONDGU,~0),  "Z,f,g", 0, v9 },
-{ "fmovld",    F3F(2, 0x35, 0x102)|MCOND(CONDL,0),  F3F(~2, ~0x35, ~0x102)|MCOND(~CONDL,~0),   "z,f,g", 0, v9 },
-{ "fmovld",    F3F(2, 0x35, 0x082)|MCOND(FCONDL,0), F3F(~2, ~0x35, ~0x082)|MCOND(~FCONDL,~0),  "6,f,g", 0, v9 },
-{ "fmovld",    F3F(2, 0x35, 0x182)|MCOND(CONDL,0),  F3F(~2, ~0x35, ~0x182)|MCOND(~CONDL,~0),   "Z,f,g", 0, v9 },
-{ "fmovld",    F3F(2, 0x35, 0x0a2)|MCOND(FCONDL,0), F3F(~2, ~0x35, ~0x0a2)|MCOND(~FCONDL,~0),  "7,f,g", 0, v9 },
-{ "fmovld",    F3F(2, 0x35, 0x0c2)|MCOND(FCONDL,0), F3F(~2, ~0x35, ~0x0c2)|MCOND(~FCONDL,~0),  "8,f,g", 0, v9 },
-{ "fmovld",    F3F(2, 0x35, 0x0e2)|MCOND(FCONDL,0), F3F(~2, ~0x35, ~0x0e2)|MCOND(~FCONDL,~0),  "9,f,g", 0, v9 },
-{ "fmovled",   F3F(2, 0x35, 0x102)|MCOND(CONDLE,0), F3F(~2, ~0x35, ~0x102)|MCOND(~CONDLE,~0),  "z,f,g", 0, v9 },
-{ "fmovled",   F3F(2, 0x35, 0x082)|MCOND(FCONDLE,0), F3F(~2, ~0x35, ~0x082)|MCOND(~FCONDLE,~0),        "6,f,g", 0, v9 },
-{ "fmovled",   F3F(2, 0x35, 0x182)|MCOND(CONDLE,0), F3F(~2, ~0x35, ~0x182)|MCOND(~CONDLE,~0),  "Z,f,g", 0, v9 },
-{ "fmovled",   F3F(2, 0x35, 0x0a2)|MCOND(FCONDLE,0), F3F(~2, ~0x35, ~0x0a2)|MCOND(~FCONDLE,~0),        "7,f,g", 0, v9 },
-{ "fmovled",   F3F(2, 0x35, 0x0c2)|MCOND(FCONDLE,0), F3F(~2, ~0x35, ~0x0c2)|MCOND(~FCONDLE,~0),        "8,f,g", 0, v9 },
-{ "fmovled",   F3F(2, 0x35, 0x0e2)|MCOND(FCONDLE,0), F3F(~2, ~0x35, ~0x0e2)|MCOND(~FCONDLE,~0),        "9,f,g", 0, v9 },
-{ "fmovleq",   F3F(2, 0x35, 0x103)|MCOND(CONDLE,0), F3F(~2, ~0x35, ~0x103)|MCOND(~CONDLE,~0),  "z,f,g", 0, v9 },
-{ "fmovleq",   F3F(2, 0x35, 0x083)|MCOND(FCONDLE,0), F3F(~2, ~0x35, ~0x083)|MCOND(~FCONDLE,~0),        "6,f,g", 0, v9 },
-{ "fmovleq",   F3F(2, 0x35, 0x183)|MCOND(CONDLE,0), F3F(~2, ~0x35, ~0x183)|MCOND(~CONDLE,~0),  "Z,f,g", 0, v9 },
-{ "fmovleq",   F3F(2, 0x35, 0x0a3)|MCOND(FCONDLE,0), F3F(~2, ~0x35, ~0x0a3)|MCOND(~FCONDLE,~0),        "7,f,g", 0, v9 },
-{ "fmovleq",   F3F(2, 0x35, 0x0c3)|MCOND(FCONDLE,0), F3F(~2, ~0x35, ~0x0c3)|MCOND(~FCONDLE,~0),        "8,f,g", 0, v9 },
-{ "fmovleq",   F3F(2, 0x35, 0x0e3)|MCOND(FCONDLE,0), F3F(~2, ~0x35, ~0x0e3)|MCOND(~FCONDLE,~0),        "9,f,g", 0, v9 },
-{ "fmovles",   F3F(2, 0x35, 0x101)|MCOND(CONDLE,0), F3F(~2, ~0x35, ~0x101)|MCOND(~CONDLE,~0),  "z,f,g", 0, v9 },
-{ "fmovles",   F3F(2, 0x35, 0x081)|MCOND(FCONDLE,0), F3F(~2, ~0x35, ~0x081)|MCOND(~FCONDLE,~0),        "6,f,g", 0, v9 },
-{ "fmovles",   F3F(2, 0x35, 0x181)|MCOND(CONDLE,0), F3F(~2, ~0x35, ~0x181)|MCOND(~CONDLE,~0),  "Z,f,g", 0, v9 },
-{ "fmovles",   F3F(2, 0x35, 0x0a1)|MCOND(FCONDLE,0), F3F(~2, ~0x35, ~0x0a1)|MCOND(~FCONDLE,~0),        "7,f,g", 0, v9 },
-{ "fmovles",   F3F(2, 0x35, 0x0c1)|MCOND(FCONDLE,0), F3F(~2, ~0x35, ~0x0c1)|MCOND(~FCONDLE,~0),        "8,f,g", 0, v9 },
-{ "fmovles",   F3F(2, 0x35, 0x0e1)|MCOND(FCONDLE,0), F3F(~2, ~0x35, ~0x0e1)|MCOND(~FCONDLE,~0),        "9,f,g", 0, v9 },
-{ "fmovleud",  F3F(2, 0x35, 0x102)|MCOND(CONDLEU,0), F3F(~2, ~0x35, ~0x102)|MCOND(~CONDLEU,~0),        "z,f,g", 0, v9 },
-{ "fmovleud",  F3F(2, 0x35, 0x182)|MCOND(CONDLEU,0), F3F(~2, ~0x35, ~0x182)|MCOND(~CONDLEU,~0),        "Z,f,g", 0, v9 },
-{ "fmovleuq",  F3F(2, 0x35, 0x103)|MCOND(CONDLEU,0), F3F(~2, ~0x35, ~0x103)|MCOND(~CONDLEU,~0),        "z,f,g", 0, v9 },
-{ "fmovleuq",  F3F(2, 0x35, 0x183)|MCOND(CONDLEU,0), F3F(~2, ~0x35, ~0x183)|MCOND(~CONDLEU,~0),        "Z,f,g", 0, v9 },
-{ "fmovleus",  F3F(2, 0x35, 0x101)|MCOND(CONDLEU,0), F3F(~2, ~0x35, ~0x101)|MCOND(~CONDLEU,~0),        "z,f,g", 0, v9 },
-{ "fmovleus",  F3F(2, 0x35, 0x181)|MCOND(CONDLEU,0), F3F(~2, ~0x35, ~0x181)|MCOND(~CONDLEU,~0),        "Z,f,g", 0, v9 },
-{ "fmovlgd",   F3F(2, 0x35, 0x082)|MCOND(FCONDLG,0), F3F(~2, ~0x35, ~0x082)|MCOND(~FCONDLG,~0),        "6,f,g", 0, v9 },
-{ "fmovlgd",   F3F(2, 0x35, 0x0a2)|MCOND(FCONDLG,0), F3F(~2, ~0x35, ~0x0a2)|MCOND(~FCONDLG,~0),        "7,f,g", 0, v9 },
-{ "fmovlgd",   F3F(2, 0x35, 0x0c2)|MCOND(FCONDLG,0), F3F(~2, ~0x35, ~0x0c2)|MCOND(~FCONDLG,~0),        "8,f,g", 0, v9 },
-{ "fmovlgd",   F3F(2, 0x35, 0x0e2)|MCOND(FCONDLG,0), F3F(~2, ~0x35, ~0x0e2)|MCOND(~FCONDLG,~0),        "9,f,g", 0, v9 },
-{ "fmovlgq",   F3F(2, 0x35, 0x083)|MCOND(FCONDLG,0), F3F(~2, ~0x35, ~0x083)|MCOND(~FCONDLG,~0),        "6,f,g", 0, v9 },
-{ "fmovlgq",   F3F(2, 0x35, 0x0a3)|MCOND(FCONDLG,0), F3F(~2, ~0x35, ~0x0a3)|MCOND(~FCONDLG,~0),        "7,f,g", 0, v9 },
-{ "fmovlgq",   F3F(2, 0x35, 0x0c3)|MCOND(FCONDLG,0), F3F(~2, ~0x35, ~0x0c3)|MCOND(~FCONDLG,~0),        "8,f,g", 0, v9 },
-{ "fmovlgq",   F3F(2, 0x35, 0x0e3)|MCOND(FCONDLG,0), F3F(~2, ~0x35, ~0x0e3)|MCOND(~FCONDLG,~0),        "9,f,g", 0, v9 },
-{ "fmovlgs",   F3F(2, 0x35, 0x081)|MCOND(FCONDLG,0), F3F(~2, ~0x35, ~0x081)|MCOND(~FCONDLG,~0),        "6,f,g", 0, v9 },
-{ "fmovlgs",   F3F(2, 0x35, 0x0a1)|MCOND(FCONDLG,0), F3F(~2, ~0x35, ~0x0a1)|MCOND(~FCONDLG,~0),        "7,f,g", 0, v9 },
-{ "fmovlgs",   F3F(2, 0x35, 0x0c1)|MCOND(FCONDLG,0), F3F(~2, ~0x35, ~0x0c1)|MCOND(~FCONDLG,~0),        "8,f,g", 0, v9 },
-{ "fmovlgs",   F3F(2, 0x35, 0x0e1)|MCOND(FCONDLG,0), F3F(~2, ~0x35, ~0x0e1)|MCOND(~FCONDLG,~0),        "9,f,g", 0, v9 },
-{ "fmovlq",    F3F(2, 0x35, 0x103)|MCOND(CONDL,0),  F3F(~2, ~0x35, ~0x103)|MCOND(~CONDL,~0),   "z,f,g", 0, v9 },
-{ "fmovlq",    F3F(2, 0x35, 0x083)|MCOND(FCONDL,0), F3F(~2, ~0x35, ~0x083)|MCOND(~FCONDL,~0),  "6,f,g", 0, v9 },
-{ "fmovlq",    F3F(2, 0x35, 0x183)|MCOND(CONDL,0),  F3F(~2, ~0x35, ~0x183)|MCOND(~CONDL,~0),   "Z,f,g", 0, v9 },
-{ "fmovlq",    F3F(2, 0x35, 0x0a3)|MCOND(FCONDL,0), F3F(~2, ~0x35, ~0x0a3)|MCOND(~FCONDL,~0),  "7,f,g", 0, v9 },
-{ "fmovlq",    F3F(2, 0x35, 0x0c3)|MCOND(FCONDL,0), F3F(~2, ~0x35, ~0x0c3)|MCOND(~FCONDL,~0),  "8,f,g", 0, v9 },
-{ "fmovlq",    F3F(2, 0x35, 0x0e3)|MCOND(FCONDL,0), F3F(~2, ~0x35, ~0x0e3)|MCOND(~FCONDL,~0),  "9,f,g", 0, v9 },
-{ "fmovls",    F3F(2, 0x35, 0x101)|MCOND(CONDL,0),  F3F(~2, ~0x35, ~0x101)|MCOND(~CONDL,~0),   "z,f,g", 0, v9 },
-{ "fmovls",    F3F(2, 0x35, 0x081)|MCOND(FCONDL,0), F3F(~2, ~0x35, ~0x081)|MCOND(~FCONDL,~0),  "6,f,g", 0, v9 },
-{ "fmovls",    F3F(2, 0x35, 0x181)|MCOND(CONDL,0),  F3F(~2, ~0x35, ~0x181)|MCOND(~CONDL,~0),   "Z,f,g", 0, v9 },
-{ "fmovls",    F3F(2, 0x35, 0x0a1)|MCOND(FCONDL,0), F3F(~2, ~0x35, ~0x0a1)|MCOND(~FCONDL,~0),  "7,f,g", 0, v9 },
-{ "fmovls",    F3F(2, 0x35, 0x0c1)|MCOND(FCONDL,0), F3F(~2, ~0x35, ~0x0c1)|MCOND(~FCONDL,~0),  "8,f,g", 0, v9 },
-{ "fmovls",    F3F(2, 0x35, 0x0e1)|MCOND(FCONDL,0), F3F(~2, ~0x35, ~0x0e1)|MCOND(~FCONDL,~0),  "9,f,g", 0, v9 },
-{ "fmovlud",   F3F(2, 0x35, 0x102)|MCOND(CONDLU,0), F3F(~2, ~0x35, ~0x102)|MCOND(~CONDLU,~0),  "z,f,g", F_ALIAS, v9 },
-{ "fmovlud",   F3F(2, 0x35, 0x182)|MCOND(CONDLU,0), F3F(~2, ~0x35, ~0x182)|MCOND(~CONDLU,~0),  "Z,f,g", F_ALIAS, v9 },
-{ "fmovluq",   F3F(2, 0x35, 0x103)|MCOND(CONDLU,0), F3F(~2, ~0x35, ~0x103)|MCOND(~CONDLU,~0),  "z,f,g", F_ALIAS, v9 },
-{ "fmovluq",   F3F(2, 0x35, 0x183)|MCOND(CONDLU,0), F3F(~2, ~0x35, ~0x183)|MCOND(~CONDLU,~0),  "Z,f,g", F_ALIAS, v9 },
-{ "fmovlus",   F3F(2, 0x35, 0x101)|MCOND(CONDLU,0), F3F(~2, ~0x35, ~0x101)|MCOND(~CONDLU,~0),  "z,f,g", F_ALIAS, v9 },
-{ "fmovlus",   F3F(2, 0x35, 0x181)|MCOND(CONDLU,0), F3F(~2, ~0x35, ~0x181)|MCOND(~CONDLU,~0),  "Z,f,g", F_ALIAS, v9 },
-{ "fmovnd",    F3F(2, 0x35, 0x102)|MCOND(CONDN,0),  F3F(~2, ~0x35, ~0x102)|MCOND(~CONDN,~0),   "z,f,g", 0, v9 },
-{ "fmovnd",    F3F(2, 0x35, 0x082)|MCOND(FCONDN,0), F3F(~2, ~0x35, ~0x082)|MCOND(~FCONDN,~0),  "6,f,g", 0, v9 },
-{ "fmovnd",    F3F(2, 0x35, 0x182)|MCOND(CONDN,0),  F3F(~2, ~0x35, ~0x182)|MCOND(~CONDN,~0),   "Z,f,g", 0, v9 },
-{ "fmovnd",    F3F(2, 0x35, 0x0a2)|MCOND(FCONDN,0), F3F(~2, ~0x35, ~0x0a2)|MCOND(~FCONDN,~0),  "7,f,g", 0, v9 },
-{ "fmovnd",    F3F(2, 0x35, 0x0c2)|MCOND(FCONDN,0), F3F(~2, ~0x35, ~0x0c2)|MCOND(~FCONDN,~0),  "8,f,g", 0, v9 },
-{ "fmovnd",    F3F(2, 0x35, 0x0e2)|MCOND(FCONDN,0), F3F(~2, ~0x35, ~0x0e2)|MCOND(~FCONDN,~0),  "9,f,g", 0, v9 },
-{ "fmovned",   F3F(2, 0x35, 0x102)|MCOND(CONDNE,0), F3F(~2, ~0x35, ~0x102)|MCOND(~CONDNE,~0),  "z,f,g", 0, v9 },
-{ "fmovned",   F3F(2, 0x35, 0x082)|MCOND(FCONDNE,0), F3F(~2, ~0x35, ~0x082)|MCOND(~FCONDNE,~0),        "6,f,g", 0, v9 },
-{ "fmovned",   F3F(2, 0x35, 0x182)|MCOND(CONDNE,0), F3F(~2, ~0x35, ~0x182)|MCOND(~CONDNE,~0),  "Z,f,g", 0, v9 },
-{ "fmovned",   F3F(2, 0x35, 0x0a2)|MCOND(FCONDNE,0), F3F(~2, ~0x35, ~0x0a2)|MCOND(~FCONDNE,~0),        "7,f,g", 0, v9 },
-{ "fmovned",   F3F(2, 0x35, 0x0c2)|MCOND(FCONDNE,0), F3F(~2, ~0x35, ~0x0c2)|MCOND(~FCONDNE,~0),        "8,f,g", 0, v9 },
-{ "fmovned",   F3F(2, 0x35, 0x0e2)|MCOND(FCONDNE,0), F3F(~2, ~0x35, ~0x0e2)|MCOND(~FCONDNE,~0),        "9,f,g", 0, v9 },
-{ "fmovnegd",  F3F(2, 0x35, 0x102)|MCOND(CONDNEG,0), F3F(~2, ~0x35, ~0x102)|MCOND(~CONDNEG,~0),        "z,f,g", 0, v9 },
-{ "fmovnegd",  F3F(2, 0x35, 0x182)|MCOND(CONDNEG,0), F3F(~2, ~0x35, ~0x182)|MCOND(~CONDNEG,~0),        "Z,f,g", 0, v9 },
-{ "fmovnegq",  F3F(2, 0x35, 0x103)|MCOND(CONDNEG,0), F3F(~2, ~0x35, ~0x103)|MCOND(~CONDNEG,~0),        "z,f,g", 0, v9 },
-{ "fmovnegq",  F3F(2, 0x35, 0x183)|MCOND(CONDNEG,0), F3F(~2, ~0x35, ~0x183)|MCOND(~CONDNEG,~0),        "Z,f,g", 0, v9 },
-{ "fmovnegs",  F3F(2, 0x35, 0x101)|MCOND(CONDNEG,0), F3F(~2, ~0x35, ~0x101)|MCOND(~CONDNEG,~0),        "z,f,g", 0, v9 },
-{ "fmovnegs",  F3F(2, 0x35, 0x181)|MCOND(CONDNEG,0), F3F(~2, ~0x35, ~0x181)|MCOND(~CONDNEG,~0),        "Z,f,g", 0, v9 },
-{ "fmovneq",   F3F(2, 0x35, 0x103)|MCOND(CONDNE,0),  F3F(~2, ~0x35, ~0x103)|MCOND(~CONDNE,~0), "z,f,g", 0, v9 },
-{ "fmovneq",   F3F(2, 0x35, 0x083)|MCOND(FCONDNE,0), F3F(~2, ~0x35, ~0x083)|MCOND(~FCONDNE,~0),        "6,f,g", 0, v9 },
-{ "fmovneq",   F3F(2, 0x35, 0x183)|MCOND(CONDNE,0),  F3F(~2, ~0x35, ~0x183)|MCOND(~CONDNE,~0), "Z,f,g", 0, v9 },
-{ "fmovneq",   F3F(2, 0x35, 0x0a3)|MCOND(FCONDNE,0), F3F(~2, ~0x35, ~0x0a3)|MCOND(~FCONDNE,~0),        "7,f,g", 0, v9 },
-{ "fmovneq",   F3F(2, 0x35, 0x0c3)|MCOND(FCONDNE,0), F3F(~2, ~0x35, ~0x0c3)|MCOND(~FCONDNE,~0),        "8,f,g", 0, v9 },
-{ "fmovneq",   F3F(2, 0x35, 0x0e3)|MCOND(FCONDNE,0), F3F(~2, ~0x35, ~0x0e3)|MCOND(~FCONDNE,~0),        "9,f,g", 0, v9 },
-{ "fmovnes",   F3F(2, 0x35, 0x101)|MCOND(CONDNE,0),  F3F(~2, ~0x35, ~0x101)|MCOND(~CONDNE,~0), "z,f,g", 0, v9 },
-{ "fmovnes",   F3F(2, 0x35, 0x081)|MCOND(FCONDNE,0), F3F(~2, ~0x35, ~0x081)|MCOND(~FCONDNE,~0),        "6,f,g", 0, v9 },
-{ "fmovnes",   F3F(2, 0x35, 0x181)|MCOND(CONDNE,0),  F3F(~2, ~0x35, ~0x181)|MCOND(~CONDNE,~0), "Z,f,g", 0, v9 },
-{ "fmovnes",   F3F(2, 0x35, 0x0a1)|MCOND(FCONDNE,0), F3F(~2, ~0x35, ~0x0a1)|MCOND(~FCONDNE,~0),        "7,f,g", 0, v9 },
-{ "fmovnes",   F3F(2, 0x35, 0x0c1)|MCOND(FCONDNE,0), F3F(~2, ~0x35, ~0x0c1)|MCOND(~FCONDNE,~0),        "8,f,g", 0, v9 },
-{ "fmovnes",   F3F(2, 0x35, 0x0e1)|MCOND(FCONDNE,0), F3F(~2, ~0x35, ~0x0e1)|MCOND(~FCONDNE,~0),        "9,f,g", 0, v9 },
-{ "fmovnq",    F3F(2, 0x35, 0x103)|MCOND(CONDN,0),  F3F(~2, ~0x35, ~0x103)|MCOND(~CONDN,~0),   "z,f,g", 0, v9 },
-{ "fmovnq",    F3F(2, 0x35, 0x083)|MCOND(FCONDN,0), F3F(~2, ~0x35, ~0x083)|MCOND(~FCONDN,~0),  "6,f,g", 0, v9 },
-{ "fmovnq",    F3F(2, 0x35, 0x183)|MCOND(CONDN,0),  F3F(~2, ~0x35, ~0x183)|MCOND(~CONDN,~0),   "Z,f,g", 0, v9 },
-{ "fmovnq",    F3F(2, 0x35, 0x0a3)|MCOND(FCONDN,0), F3F(~2, ~0x35, ~0x0a3)|MCOND(~FCONDN,~0),  "7,f,g", 0, v9 },
-{ "fmovnq",    F3F(2, 0x35, 0x0c3)|MCOND(FCONDN,0), F3F(~2, ~0x35, ~0x0c3)|MCOND(~FCONDN,~0),  "8,f,g", 0, v9 },
-{ "fmovnq",    F3F(2, 0x35, 0x0e3)|MCOND(FCONDN,0), F3F(~2, ~0x35, ~0x0e3)|MCOND(~FCONDN,~0),  "9,f,g", 0, v9 },
-{ "fmovns",    F3F(2, 0x35, 0x101)|MCOND(CONDN,0),  F3F(~2, ~0x35, ~0x101)|MCOND(~CONDN,~0),   "z,f,g", 0, v9 },
-{ "fmovns",    F3F(2, 0x35, 0x081)|MCOND(FCONDN,0), F3F(~2, ~0x35, ~0x081)|MCOND(~FCONDN,~0),  "6,f,g", 0, v9 },
-{ "fmovns",    F3F(2, 0x35, 0x181)|MCOND(CONDN,0),  F3F(~2, ~0x35, ~0x181)|MCOND(~CONDN,~0),   "Z,f,g", 0, v9 },
-{ "fmovns",    F3F(2, 0x35, 0x0a1)|MCOND(FCONDN,0), F3F(~2, ~0x35, ~0x0a1)|MCOND(~FCONDN,~0),  "7,f,g", 0, v9 },
-{ "fmovns",    F3F(2, 0x35, 0x0c1)|MCOND(FCONDN,0), F3F(~2, ~0x35, ~0x0c1)|MCOND(~FCONDN,~0),  "8,f,g", 0, v9 },
-{ "fmovns",    F3F(2, 0x35, 0x0e1)|MCOND(FCONDN,0), F3F(~2, ~0x35, ~0x0e1)|MCOND(~FCONDN,~0),  "9,f,g", 0, v9 },
-{ "fmovnzd",   F3F(2, 0x35, 0x102)|MCOND(CONDNZ,0), F3F(~2, ~0x35, ~0x102)|MCOND(~CONDNZ,~0),  "z,f,g", F_ALIAS, v9 },
-{ "fmovnzd",   F3F(2, 0x35, 0x082)|MCOND(FCONDNZ,0), F3F(~2, ~0x35, ~0x082)|MCOND(~FCONDNZ,~0),        "6,f,g", F_ALIAS, v9 },
-{ "fmovnzd",   F3F(2, 0x35, 0x182)|MCOND(CONDNZ,0), F3F(~2, ~0x35, ~0x182)|MCOND(~CONDNZ,~0),  "Z,f,g", F_ALIAS, v9 },
-{ "fmovnzd",   F3F(2, 0x35, 0x0a2)|MCOND(FCONDNZ,0), F3F(~2, ~0x35, ~0x0a2)|MCOND(~FCONDNZ,~0),        "7,f,g", F_ALIAS, v9 },
-{ "fmovnzd",   F3F(2, 0x35, 0x0c2)|MCOND(FCONDNZ,0), F3F(~2, ~0x35, ~0x0c2)|MCOND(~FCONDNZ,~0),        "8,f,g", F_ALIAS, v9 },
-{ "fmovnzd",   F3F(2, 0x35, 0x0e2)|MCOND(FCONDNZ,0), F3F(~2, ~0x35, ~0x0e2)|MCOND(~FCONDNZ,~0),        "9,f,g", F_ALIAS, v9 },
-{ "fmovnzq",   F3F(2, 0x35, 0x103)|MCOND(CONDNZ,0), F3F(~2, ~0x35, ~0x103)|MCOND(~CONDNZ,~0),  "z,f,g", F_ALIAS, v9 },
-{ "fmovnzq",   F3F(2, 0x35, 0x083)|MCOND(FCONDNZ,0), F3F(~2, ~0x35, ~0x083)|MCOND(~FCONDNZ,~0),        "6,f,g", F_ALIAS, v9 },
-{ "fmovnzq",   F3F(2, 0x35, 0x183)|MCOND(CONDNZ,0), F3F(~2, ~0x35, ~0x183)|MCOND(~CONDNZ,~0),  "Z,f,g", F_ALIAS, v9 },
-{ "fmovnzq",   F3F(2, 0x35, 0x0a3)|MCOND(FCONDNZ,0), F3F(~2, ~0x35, ~0x0a3)|MCOND(~FCONDNZ,~0),        "7,f,g", F_ALIAS, v9 },
-{ "fmovnzq",   F3F(2, 0x35, 0x0c3)|MCOND(FCONDNZ,0), F3F(~2, ~0x35, ~0x0c3)|MCOND(~FCONDNZ,~0),        "8,f,g", F_ALIAS, v9 },
-{ "fmovnzq",   F3F(2, 0x35, 0x0e3)|MCOND(FCONDNZ,0), F3F(~2, ~0x35, ~0x0e3)|MCOND(~FCONDNZ,~0),        "9,f,g", F_ALIAS, v9 },
-{ "fmovnzs",   F3F(2, 0x35, 0x101)|MCOND(CONDNZ,0), F3F(~2, ~0x35, ~0x101)|MCOND(~CONDNZ,~0),  "z,f,g", F_ALIAS, v9 },
-{ "fmovnzs",   F3F(2, 0x35, 0x081)|MCOND(FCONDNZ,0), F3F(~2, ~0x35, ~0x081)|MCOND(~FCONDNZ,~0),        "6,f,g", F_ALIAS, v9 },
-{ "fmovnzs",   F3F(2, 0x35, 0x181)|MCOND(CONDNZ,0), F3F(~2, ~0x35, ~0x181)|MCOND(~CONDNZ,~0),  "Z,f,g", F_ALIAS, v9 },
-{ "fmovnzs",   F3F(2, 0x35, 0x0a1)|MCOND(FCONDNZ,0), F3F(~2, ~0x35, ~0x0a1)|MCOND(~FCONDNZ,~0),        "7,f,g", F_ALIAS, v9 },
-{ "fmovnzs",   F3F(2, 0x35, 0x0c1)|MCOND(FCONDNZ,0), F3F(~2, ~0x35, ~0x0c1)|MCOND(~FCONDNZ,~0),        "8,f,g", F_ALIAS, v9 },
-{ "fmovnzs",   F3F(2, 0x35, 0x0e1)|MCOND(FCONDNZ,0), F3F(~2, ~0x35, ~0x0e1)|MCOND(~FCONDNZ,~0),        "9,f,g", F_ALIAS, v9 },
-{ "fmovod",    F3F(2, 0x35, 0x082)|MCOND(FCONDO,0), F3F(~2, ~0x35, ~0x082)|MCOND(~FCONDO,~0),  "6,f,g", 0, v9 },
-{ "fmovod",    F3F(2, 0x35, 0x0a2)|MCOND(FCONDO,0), F3F(~2, ~0x35, ~0x0a2)|MCOND(~FCONDO,~0),  "7,f,g", 0, v9 },
-{ "fmovod",    F3F(2, 0x35, 0x0c2)|MCOND(FCONDO,0), F3F(~2, ~0x35, ~0x0c2)|MCOND(~FCONDO,~0),  "8,f,g", 0, v9 },
-{ "fmovod",    F3F(2, 0x35, 0x0e2)|MCOND(FCONDO,0), F3F(~2, ~0x35, ~0x0e2)|MCOND(~FCONDO,~0),  "9,f,g", 0, v9 },
-{ "fmovoq",    F3F(2, 0x35, 0x083)|MCOND(FCONDO,0), F3F(~2, ~0x35, ~0x083)|MCOND(~FCONDO,~0),  "6,f,g", 0, v9 },
-{ "fmovoq",    F3F(2, 0x35, 0x0a3)|MCOND(FCONDO,0), F3F(~2, ~0x35, ~0x0a3)|MCOND(~FCONDO,~0),  "7,f,g", 0, v9 },
-{ "fmovoq",    F3F(2, 0x35, 0x0c3)|MCOND(FCONDO,0), F3F(~2, ~0x35, ~0x0c3)|MCOND(~FCONDO,~0),  "8,f,g", 0, v9 },
-{ "fmovoq",    F3F(2, 0x35, 0x0e3)|MCOND(FCONDO,0), F3F(~2, ~0x35, ~0x0e3)|MCOND(~FCONDO,~0),  "9,f,g", 0, v9 },
-{ "fmovos",    F3F(2, 0x35, 0x081)|MCOND(FCONDO,0), F3F(~2, ~0x35, ~0x081)|MCOND(~FCONDO,~0),  "6,f,g", 0, v9 },
-{ "fmovos",    F3F(2, 0x35, 0x0a1)|MCOND(FCONDO,0), F3F(~2, ~0x35, ~0x0a1)|MCOND(~FCONDO,~0),  "7,f,g", 0, v9 },
-{ "fmovos",    F3F(2, 0x35, 0x0c1)|MCOND(FCONDO,0), F3F(~2, ~0x35, ~0x0c1)|MCOND(~FCONDO,~0),  "8,f,g", 0, v9 },
-{ "fmovos",    F3F(2, 0x35, 0x0e1)|MCOND(FCONDO,0), F3F(~2, ~0x35, ~0x0e1)|MCOND(~FCONDO,~0),  "9,f,g", 0, v9 },
-{ "fmovposd",  F3F(2, 0x35, 0x102)|MCOND(CONDPOS,0), F3F(~2, ~0x35, ~0x102)|MCOND(~CONDPOS,~0),        "z,f,g", 0, v9 },
-{ "fmovposd",  F3F(2, 0x35, 0x182)|MCOND(CONDPOS,0), F3F(~2, ~0x35, ~0x182)|MCOND(~CONDPOS,~0),        "Z,f,g", 0, v9 },
-{ "fmovposq",  F3F(2, 0x35, 0x103)|MCOND(CONDPOS,0), F3F(~2, ~0x35, ~0x103)|MCOND(~CONDPOS,~0),        "z,f,g", 0, v9 },
-{ "fmovposq",  F3F(2, 0x35, 0x183)|MCOND(CONDPOS,0), F3F(~2, ~0x35, ~0x183)|MCOND(~CONDPOS,~0),        "Z,f,g", 0, v9 },
-{ "fmovposs",  F3F(2, 0x35, 0x101)|MCOND(CONDPOS,0), F3F(~2, ~0x35, ~0x101)|MCOND(~CONDPOS,~0),        "z,f,g", 0, v9 },
-{ "fmovposs",  F3F(2, 0x35, 0x181)|MCOND(CONDPOS,0), F3F(~2, ~0x35, ~0x181)|MCOND(~CONDPOS,~0),        "Z,f,g", 0, v9 },
-{ "fmovud",    F3F(2, 0x35, 0x082)|MCOND(FCONDU,0), F3F(~2, ~0x35, ~0x082)|MCOND(~FCONDU,~0),  "6,f,g", 0, v9 },
-{ "fmovud",    F3F(2, 0x35, 0x0a2)|MCOND(FCONDU,0), F3F(~2, ~0x35, ~0x0a2)|MCOND(~FCONDU,~0),  "7,f,g", 0, v9 },
-{ "fmovud",    F3F(2, 0x35, 0x0c2)|MCOND(FCONDU,0), F3F(~2, ~0x35, ~0x0c2)|MCOND(~FCONDU,~0),  "8,f,g", 0, v9 },
-{ "fmovud",    F3F(2, 0x35, 0x0e2)|MCOND(FCONDU,0), F3F(~2, ~0x35, ~0x0e2)|MCOND(~FCONDU,~0),  "9,f,g", 0, v9 },
-{ "fmovued",   F3F(2, 0x35, 0x082)|MCOND(FCONDUE,0), F3F(~2, ~0x35, ~0x082)|MCOND(~FCONDUE,~0),        "6,f,g", 0, v9 },
-{ "fmovued",   F3F(2, 0x35, 0x0a2)|MCOND(FCONDUE,0), F3F(~2, ~0x35, ~0x0a2)|MCOND(~FCONDUE,~0),        "7,f,g", 0, v9 },
-{ "fmovued",   F3F(2, 0x35, 0x0c2)|MCOND(FCONDUE,0), F3F(~2, ~0x35, ~0x0c2)|MCOND(~FCONDUE,~0),        "8,f,g", 0, v9 },
-{ "fmovued",   F3F(2, 0x35, 0x0e2)|MCOND(FCONDUE,0), F3F(~2, ~0x35, ~0x0e2)|MCOND(~FCONDUE,~0),        "9,f,g", 0, v9 },
-{ "fmovueq",   F3F(2, 0x35, 0x083)|MCOND(FCONDUE,0), F3F(~2, ~0x35, ~0x083)|MCOND(~FCONDUE,~0),        "6,f,g", 0, v9 },
-{ "fmovueq",   F3F(2, 0x35, 0x0a3)|MCOND(FCONDUE,0), F3F(~2, ~0x35, ~0x0a3)|MCOND(~FCONDUE,~0),        "7,f,g", 0, v9 },
-{ "fmovueq",   F3F(2, 0x35, 0x0c3)|MCOND(FCONDUE,0), F3F(~2, ~0x35, ~0x0c3)|MCOND(~FCONDUE,~0),        "8,f,g", 0, v9 },
-{ "fmovueq",   F3F(2, 0x35, 0x0e3)|MCOND(FCONDUE,0), F3F(~2, ~0x35, ~0x0e3)|MCOND(~FCONDUE,~0),        "9,f,g", 0, v9 },
-{ "fmovues",   F3F(2, 0x35, 0x081)|MCOND(FCONDUE,0), F3F(~2, ~0x35, ~0x081)|MCOND(~FCONDUE,~0),        "6,f,g", 0, v9 },
-{ "fmovues",   F3F(2, 0x35, 0x0a1)|MCOND(FCONDUE,0), F3F(~2, ~0x35, ~0x0a1)|MCOND(~FCONDUE,~0),        "7,f,g", 0, v9 },
-{ "fmovues",   F3F(2, 0x35, 0x0c1)|MCOND(FCONDUE,0), F3F(~2, ~0x35, ~0x0c1)|MCOND(~FCONDUE,~0),        "8,f,g", 0, v9 },
-{ "fmovues",   F3F(2, 0x35, 0x0e1)|MCOND(FCONDUE,0), F3F(~2, ~0x35, ~0x0e1)|MCOND(~FCONDUE,~0),        "9,f,g", 0, v9 },
-{ "fmovugd",   F3F(2, 0x35, 0x082)|MCOND(FCONDUG,0), F3F(~2, ~0x35, ~0x082)|MCOND(~FCONDUG,~0),        "6,f,g", 0, v9 },
-{ "fmovugd",   F3F(2, 0x35, 0x0a2)|MCOND(FCONDUG,0), F3F(~2, ~0x35, ~0x0a2)|MCOND(~FCONDUG,~0),        "7,f,g", 0, v9 },
-{ "fmovugd",   F3F(2, 0x35, 0x0c2)|MCOND(FCONDUG,0), F3F(~2, ~0x35, ~0x0c2)|MCOND(~FCONDUG,~0),        "8,f,g", 0, v9 },
-{ "fmovugd",   F3F(2, 0x35, 0x0e2)|MCOND(FCONDUG,0), F3F(~2, ~0x35, ~0x0e2)|MCOND(~FCONDUG,~0),        "9,f,g", 0, v9 },
-{ "fmovuged",  F3F(2, 0x35, 0x082)|MCOND(FCONDUGE,0), F3F(~2, ~0x35, ~0x082)|MCOND(~FCONDUGE,~0),      "6,f,g", 0, v9 },
-{ "fmovuged",  F3F(2, 0x35, 0x0a2)|MCOND(FCONDUGE,0), F3F(~2, ~0x35, ~0x0a2)|MCOND(~FCONDUGE,~0),      "7,f,g", 0, v9 },
-{ "fmovuged",  F3F(2, 0x35, 0x0c2)|MCOND(FCONDUGE,0), F3F(~2, ~0x35, ~0x0c2)|MCOND(~FCONDUGE,~0),      "8,f,g", 0, v9 },
-{ "fmovuged",  F3F(2, 0x35, 0x0e2)|MCOND(FCONDUGE,0), F3F(~2, ~0x35, ~0x0e2)|MCOND(~FCONDUGE,~0),      "9,f,g", 0, v9 },
-{ "fmovugeq",  F3F(2, 0x35, 0x083)|MCOND(FCONDUGE,0), F3F(~2, ~0x35, ~0x083)|MCOND(~FCONDUGE,~0),      "6,f,g", 0, v9 },
-{ "fmovugeq",  F3F(2, 0x35, 0x0a3)|MCOND(FCONDUGE,0), F3F(~2, ~0x35, ~0x0a3)|MCOND(~FCONDUGE,~0),      "7,f,g", 0, v9 },
-{ "fmovugeq",  F3F(2, 0x35, 0x0c3)|MCOND(FCONDUGE,0), F3F(~2, ~0x35, ~0x0c3)|MCOND(~FCONDUGE,~0),      "8,f,g", 0, v9 },
-{ "fmovugeq",  F3F(2, 0x35, 0x0e3)|MCOND(FCONDUGE,0), F3F(~2, ~0x35, ~0x0e3)|MCOND(~FCONDUGE,~0),      "9,f,g", 0, v9 },
-{ "fmovuges",  F3F(2, 0x35, 0x081)|MCOND(FCONDUGE,0), F3F(~2, ~0x35, ~0x081)|MCOND(~FCONDUGE,~0),      "6,f,g", 0, v9 },
-{ "fmovuges",  F3F(2, 0x35, 0x0a1)|MCOND(FCONDUGE,0), F3F(~2, ~0x35, ~0x0a1)|MCOND(~FCONDUGE,~0),      "7,f,g", 0, v9 },
-{ "fmovuges",  F3F(2, 0x35, 0x0c1)|MCOND(FCONDUGE,0), F3F(~2, ~0x35, ~0x0c1)|MCOND(~FCONDUGE,~0),      "8,f,g", 0, v9 },
-{ "fmovuges",  F3F(2, 0x35, 0x0e1)|MCOND(FCONDUGE,0), F3F(~2, ~0x35, ~0x0e1)|MCOND(~FCONDUGE,~0),      "9,f,g", 0, v9 },
-{ "fmovugq",   F3F(2, 0x35, 0x083)|MCOND(FCONDUG,0), F3F(~2, ~0x35, ~0x083)|MCOND(~FCONDUG,~0),        "6,f,g", 0, v9 },
-{ "fmovugq",   F3F(2, 0x35, 0x0a3)|MCOND(FCONDUG,0), F3F(~2, ~0x35, ~0x0a3)|MCOND(~FCONDUG,~0),        "7,f,g", 0, v9 },
-{ "fmovugq",   F3F(2, 0x35, 0x0c3)|MCOND(FCONDUG,0), F3F(~2, ~0x35, ~0x0c3)|MCOND(~FCONDUG,~0),        "8,f,g", 0, v9 },
-{ "fmovugq",   F3F(2, 0x35, 0x0e3)|MCOND(FCONDUG,0), F3F(~2, ~0x35, ~0x0e3)|MCOND(~FCONDUG,~0),        "9,f,g", 0, v9 },
-{ "fmovugs",   F3F(2, 0x35, 0x081)|MCOND(FCONDUG,0), F3F(~2, ~0x35, ~0x081)|MCOND(~FCONDUG,~0),        "6,f,g", 0, v9 },
-{ "fmovugs",   F3F(2, 0x35, 0x0a1)|MCOND(FCONDUG,0), F3F(~2, ~0x35, ~0x0a1)|MCOND(~FCONDUG,~0),        "7,f,g", 0, v9 },
-{ "fmovugs",   F3F(2, 0x35, 0x0c1)|MCOND(FCONDUG,0), F3F(~2, ~0x35, ~0x0c1)|MCOND(~FCONDUG,~0),        "8,f,g", 0, v9 },
-{ "fmovugs",   F3F(2, 0x35, 0x0e1)|MCOND(FCONDUG,0), F3F(~2, ~0x35, ~0x0e1)|MCOND(~FCONDUG,~0),        "9,f,g", 0, v9 },
-{ "fmovuld",   F3F(2, 0x35, 0x082)|MCOND(FCONDUL,0), F3F(~2, ~0x35, ~0x082)|MCOND(~FCONDUL,~0),        "6,f,g", 0, v9 },
-{ "fmovuld",   F3F(2, 0x35, 0x0a2)|MCOND(FCONDUL,0), F3F(~2, ~0x35, ~0x0a2)|MCOND(~FCONDUL,~0),        "7,f,g", 0, v9 },
-{ "fmovuld",   F3F(2, 0x35, 0x0c2)|MCOND(FCONDUL,0), F3F(~2, ~0x35, ~0x0c2)|MCOND(~FCONDUL,~0),        "8,f,g", 0, v9 },
-{ "fmovuld",   F3F(2, 0x35, 0x0e2)|MCOND(FCONDUL,0), F3F(~2, ~0x35, ~0x0e2)|MCOND(~FCONDUL,~0),        "9,f,g", 0, v9 },
-{ "fmovuled",  F3F(2, 0x35, 0x082)|MCOND(FCONDULE,0), F3F(~2, ~0x35, ~0x082)|MCOND(~FCONDULE,~0),      "6,f,g", 0, v9 },
-{ "fmovuled",  F3F(2, 0x35, 0x0a2)|MCOND(FCONDULE,0), F3F(~2, ~0x35, ~0x0a2)|MCOND(~FCONDULE,~0),      "7,f,g", 0, v9 },
-{ "fmovuled",  F3F(2, 0x35, 0x0c2)|MCOND(FCONDULE,0), F3F(~2, ~0x35, ~0x0c2)|MCOND(~FCONDULE,~0),      "8,f,g", 0, v9 },
-{ "fmovuled",  F3F(2, 0x35, 0x0e2)|MCOND(FCONDULE,0), F3F(~2, ~0x35, ~0x0e2)|MCOND(~FCONDULE,~0),      "9,f,g", 0, v9 },
-{ "fmovuleq",  F3F(2, 0x35, 0x083)|MCOND(FCONDULE,0), F3F(~2, ~0x35, ~0x083)|MCOND(~FCONDULE,~0),      "6,f,g", 0, v9 },
-{ "fmovuleq",  F3F(2, 0x35, 0x0a3)|MCOND(FCONDULE,0), F3F(~2, ~0x35, ~0x0a3)|MCOND(~FCONDULE,~0),      "7,f,g", 0, v9 },
-{ "fmovuleq",  F3F(2, 0x35, 0x0c3)|MCOND(FCONDULE,0), F3F(~2, ~0x35, ~0x0c3)|MCOND(~FCONDULE,~0),      "8,f,g", 0, v9 },
-{ "fmovuleq",  F3F(2, 0x35, 0x0e3)|MCOND(FCONDULE,0), F3F(~2, ~0x35, ~0x0e3)|MCOND(~FCONDULE,~0),      "9,f,g", 0, v9 },
-{ "fmovules",  F3F(2, 0x35, 0x081)|MCOND(FCONDULE,0), F3F(~2, ~0x35, ~0x081)|MCOND(~FCONDULE,~0),      "6,f,g", 0, v9 },
-{ "fmovules",  F3F(2, 0x35, 0x0a1)|MCOND(FCONDULE,0), F3F(~2, ~0x35, ~0x0a1)|MCOND(~FCONDULE,~0),      "7,f,g", 0, v9 },
-{ "fmovules",  F3F(2, 0x35, 0x0c1)|MCOND(FCONDULE,0), F3F(~2, ~0x35, ~0x0c1)|MCOND(~FCONDULE,~0),      "8,f,g", 0, v9 },
-{ "fmovules",  F3F(2, 0x35, 0x0e1)|MCOND(FCONDULE,0), F3F(~2, ~0x35, ~0x0e1)|MCOND(~FCONDULE,~0),      "9,f,g", 0, v9 },
-{ "fmovulq",   F3F(2, 0x35, 0x083)|MCOND(FCONDUL,0), F3F(~2, ~0x35, ~0x083)|MCOND(~FCONDUL,~0),        "6,f,g", 0, v9 },
-{ "fmovulq",   F3F(2, 0x35, 0x0a3)|MCOND(FCONDUL,0), F3F(~2, ~0x35, ~0x0a3)|MCOND(~FCONDUL,~0),        "7,f,g", 0, v9 },
-{ "fmovulq",   F3F(2, 0x35, 0x0c3)|MCOND(FCONDUL,0), F3F(~2, ~0x35, ~0x0c3)|MCOND(~FCONDUL,~0),        "8,f,g", 0, v9 },
-{ "fmovulq",   F3F(2, 0x35, 0x0e3)|MCOND(FCONDUL,0), F3F(~2, ~0x35, ~0x0e3)|MCOND(~FCONDUL,~0),        "9,f,g", 0, v9 },
-{ "fmovuls",   F3F(2, 0x35, 0x081)|MCOND(FCONDUL,0), F3F(~2, ~0x35, ~0x081)|MCOND(~FCONDUL,~0),        "6,f,g", 0, v9 },
-{ "fmovuls",   F3F(2, 0x35, 0x0a1)|MCOND(FCONDUL,0), F3F(~2, ~0x35, ~0x0a1)|MCOND(~FCONDUL,~0),        "7,f,g", 0, v9 },
-{ "fmovuls",   F3F(2, 0x35, 0x0c1)|MCOND(FCONDUL,0), F3F(~2, ~0x35, ~0x0c1)|MCOND(~FCONDUL,~0),        "8,f,g", 0, v9 },
-{ "fmovuls",   F3F(2, 0x35, 0x0e1)|MCOND(FCONDUL,0), F3F(~2, ~0x35, ~0x0e1)|MCOND(~FCONDUL,~0),        "9,f,g", 0, v9 },
-{ "fmovuq",    F3F(2, 0x35, 0x083)|MCOND(FCONDU,0), F3F(~2, ~0x35, ~0x083)|MCOND(~FCONDU,~0),  "6,f,g", 0, v9 },
-{ "fmovuq",    F3F(2, 0x35, 0x0a3)|MCOND(FCONDU,0), F3F(~2, ~0x35, ~0x0a3)|MCOND(~FCONDU,~0),  "7,f,g", 0, v9 },
-{ "fmovuq",    F3F(2, 0x35, 0x0c3)|MCOND(FCONDU,0), F3F(~2, ~0x35, ~0x0c3)|MCOND(~FCONDU,~0),  "8,f,g", 0, v9 },
-{ "fmovuq",    F3F(2, 0x35, 0x0e3)|MCOND(FCONDU,0), F3F(~2, ~0x35, ~0x0e3)|MCOND(~FCONDU,~0),  "9,f,g", 0, v9 },
-{ "fmovus",    F3F(2, 0x35, 0x081)|MCOND(FCONDU,0), F3F(~2, ~0x35, ~0x081)|MCOND(~FCONDU,~0),  "6,f,g", 0, v9 },
-{ "fmovus",    F3F(2, 0x35, 0x0a1)|MCOND(FCONDU,0), F3F(~2, ~0x35, ~0x0a1)|MCOND(~FCONDU,~0),  "7,f,g", 0, v9 },
-{ "fmovus",    F3F(2, 0x35, 0x0c1)|MCOND(FCONDU,0), F3F(~2, ~0x35, ~0x0c1)|MCOND(~FCONDU,~0),  "8,f,g", 0, v9 },
-{ "fmovus",    F3F(2, 0x35, 0x0e1)|MCOND(FCONDU,0), F3F(~2, ~0x35, ~0x0e1)|MCOND(~FCONDU,~0),  "9,f,g", 0, v9 },
-{ "fmovvcd",   F3F(2, 0x35, 0x102)|MCOND(CONDVC,0), F3F(~2, ~0x35, ~0x102)|MCOND(~CONDVC,~0),  "z,f,g", 0, v9 },
-{ "fmovvcd",   F3F(2, 0x35, 0x182)|MCOND(CONDVC,0), F3F(~2, ~0x35, ~0x182)|MCOND(~CONDVC,~0),  "Z,f,g", 0, v9 },
-{ "fmovvcq",   F3F(2, 0x35, 0x103)|MCOND(CONDVC,0), F3F(~2, ~0x35, ~0x103)|MCOND(~CONDVC,~0),  "z,f,g", 0, v9 },
-{ "fmovvcq",   F3F(2, 0x35, 0x183)|MCOND(CONDVC,0), F3F(~2, ~0x35, ~0x183)|MCOND(~CONDVC,~0),  "Z,f,g", 0, v9 },
-{ "fmovvcs",   F3F(2, 0x35, 0x101)|MCOND(CONDVC,0), F3F(~2, ~0x35, ~0x101)|MCOND(~CONDVC,~0),  "z,f,g", 0, v9 },
-{ "fmovvcs",   F3F(2, 0x35, 0x181)|MCOND(CONDVC,0), F3F(~2, ~0x35, ~0x181)|MCOND(~CONDVC,~0),  "Z,f,g", 0, v9 },
-{ "fmovvsd",   F3F(2, 0x35, 0x102)|MCOND(CONDVS,0), F3F(~2, ~0x35, ~0x102)|MCOND(~CONDVS,~0),  "z,f,g", 0, v9 },
-{ "fmovvsd",   F3F(2, 0x35, 0x182)|MCOND(CONDVS,0), F3F(~2, ~0x35, ~0x182)|MCOND(~CONDVS,~0),  "Z,f,g", 0, v9 },
-{ "fmovvsq",   F3F(2, 0x35, 0x103)|MCOND(CONDVS,0), F3F(~2, ~0x35, ~0x103)|MCOND(~CONDVS,~0),  "z,f,g", 0, v9 },
-{ "fmovvsq",   F3F(2, 0x35, 0x183)|MCOND(CONDVS,0), F3F(~2, ~0x35, ~0x183)|MCOND(~CONDVS,~0),  "Z,f,g", 0, v9 },
-{ "fmovvss",   F3F(2, 0x35, 0x101)|MCOND(CONDVS,0), F3F(~2, ~0x35, ~0x101)|MCOND(~CONDVS,~0),  "z,f,g", 0, v9 },
-{ "fmovvss",   F3F(2, 0x35, 0x181)|MCOND(CONDVS,0), F3F(~2, ~0x35, ~0x181)|MCOND(~CONDVS,~0),  "Z,f,g", 0, v9 },
-{ "fmovzd",    F3F(2, 0x35, 0x102)|MCOND(CONDZ,0),   F3F(~2, ~0x35, ~0x102)|MCOND(~CONDZ,~0),  "z,f,g", F_ALIAS, v9 },
-{ "fmovzd",    F3F(2, 0x35, 0x082)|MCOND(FCONDZ,0), F3F(~2, ~0x35, ~0x082)|MCOND(~FCONDZ,~0),  "6,f,g", F_ALIAS, v9 },
-{ "fmovzd",    F3F(2, 0x35, 0x182)|MCOND(CONDZ,0),   F3F(~2, ~0x35, ~0x182)|MCOND(~CONDZ,~0),  "Z,f,g", F_ALIAS, v9 },
-{ "fmovzd",    F3F(2, 0x35, 0x0a2)|MCOND(FCONDZ,0), F3F(~2, ~0x35, ~0x0a2)|MCOND(~FCONDZ,~0),  "7,f,g", F_ALIAS, v9 },
-{ "fmovzd",    F3F(2, 0x35, 0x0c2)|MCOND(FCONDZ,0), F3F(~2, ~0x35, ~0x0c2)|MCOND(~FCONDZ,~0),  "8,f,g", F_ALIAS, v9 },
-{ "fmovzd",    F3F(2, 0x35, 0x0e2)|MCOND(FCONDZ,0), F3F(~2, ~0x35, ~0x0e2)|MCOND(~FCONDZ,~0),  "9,f,g", F_ALIAS, v9 },
-{ "fmovzq",    F3F(2, 0x35, 0x103)|MCOND(CONDZ,0),   F3F(~2, ~0x35, ~0x103)|MCOND(~CONDZ,~0),  "z,f,g", F_ALIAS, v9 },
-{ "fmovzq",    F3F(2, 0x35, 0x083)|MCOND(FCONDZ,0), F3F(~2, ~0x35, ~0x083)|MCOND(~FCONDZ,~0),  "6,f,g", F_ALIAS, v9 },
-{ "fmovzq",    F3F(2, 0x35, 0x183)|MCOND(CONDZ,0),   F3F(~2, ~0x35, ~0x183)|MCOND(~CONDZ,~0),  "Z,f,g", F_ALIAS, v9 },
-{ "fmovzq",    F3F(2, 0x35, 0x0a3)|MCOND(FCONDZ,0), F3F(~2, ~0x35, ~0x0a3)|MCOND(~FCONDZ,~0),  "7,f,g", F_ALIAS, v9 },
-{ "fmovzq",    F3F(2, 0x35, 0x0c3)|MCOND(FCONDZ,0), F3F(~2, ~0x35, ~0x0c3)|MCOND(~FCONDZ,~0),  "8,f,g", F_ALIAS, v9 },
-{ "fmovzq",    F3F(2, 0x35, 0x0e3)|MCOND(FCONDZ,0), F3F(~2, ~0x35, ~0x0e3)|MCOND(~FCONDZ,~0),  "9,f,g", F_ALIAS, v9 },
-{ "fmovzs",    F3F(2, 0x35, 0x101)|MCOND(CONDZ,0),   F3F(~2, ~0x35, ~0x101)|MCOND(~CONDZ,~0),  "z,f,g", F_ALIAS, v9 },
-{ "fmovzs",    F3F(2, 0x35, 0x081)|MCOND(FCONDZ,0), F3F(~2, ~0x35, ~0x081)|MCOND(~FCONDZ,~0),  "6,f,g", F_ALIAS, v9 },
-{ "fmovzs",    F3F(2, 0x35, 0x181)|MCOND(CONDZ,0),   F3F(~2, ~0x35, ~0x181)|MCOND(~CONDZ,~0),  "Z,f,g", F_ALIAS, v9 },
-{ "fmovzs",    F3F(2, 0x35, 0x0a1)|MCOND(FCONDZ,0), F3F(~2, ~0x35, ~0x0a1)|MCOND(~FCONDZ,~0),  "7,f,g", F_ALIAS, v9 },
-{ "fmovzs",    F3F(2, 0x35, 0x0c1)|MCOND(FCONDZ,0), F3F(~2, ~0x35, ~0x0c1)|MCOND(~FCONDZ,~0),  "8,f,g", F_ALIAS, v9 },
-{ "fmovzs",    F3F(2, 0x35, 0x0e1)|MCOND(FCONDZ,0), F3F(~2, ~0x35, ~0x0e1)|MCOND(~FCONDZ,~0),  "9,f,g", F_ALIAS, v9 },
-
-#define brfc(opcode, mask, lose, flags) \
- { opcode, (mask), ANNUL|(lose), "l",    flags|F_DELAYED, v6 }, \
- { opcode, (mask)|ANNUL, (lose), ",a l", flags|F_DELAYED, v6 }
-
-#define brfcx(opcode, mask, lose, flags) /* v9 */ \
- { opcode, FBFCC(0)|(mask), ANNUL|BPRED|FBFCC(~0)|(lose), "6,G",   flags|F_DELAYED, v9 }, \
- { opcode, FBFCC(0)|(mask)|ANNUL, BPRED|FBFCC(~0)|(lose), ",a 6,G",   flags|F_DELAYED, v9 }, \
- { opcode, FBFCC(0)|(mask), ANNUL|BPRED|FBFCC(~0)|(lose), ",N 6,G",   flags|F_DELAYED, v9 }, \
- { opcode, FBFCC(0)|(mask)|ANNUL, BPRED|FBFCC(~0)|(lose), ",a,N 6,G", flags|F_DELAYED, v9 }, \
- { opcode, FBFCC(0)|(mask)|BPRED, ANNUL|FBFCC(~0)|(lose), ",T 6,G",   flags|F_DELAYED, v9 }, \
- { opcode, FBFCC(0)|(mask)|BPRED|ANNUL, FBFCC(~0)|(lose), ",a,T 6,G", flags|F_DELAYED, v9 }, \
- { opcode, FBFCC(1)|(mask), ANNUL|BPRED|FBFCC(~1)|(lose), "7,G",   flags|F_DELAYED, v9 }, \
- { opcode, FBFCC(1)|(mask)|ANNUL, BPRED|FBFCC(~1)|(lose), ",a 7,G",   flags|F_DELAYED, v9 }, \
- { opcode, FBFCC(1)|(mask), ANNUL|BPRED|FBFCC(~1)|(lose), ",N 7,G",   flags|F_DELAYED, v9 }, \
- { opcode, FBFCC(1)|(mask)|ANNUL, BPRED|FBFCC(~1)|(lose), ",a,N 7,G", flags|F_DELAYED, v9 }, \
- { opcode, FBFCC(1)|(mask)|BPRED, ANNUL|FBFCC(~1)|(lose), ",T 7,G",   flags|F_DELAYED, v9 }, \
- { opcode, FBFCC(1)|(mask)|BPRED|ANNUL, FBFCC(~1)|(lose), ",a,T 7,G", flags|F_DELAYED, v9 }, \
- { opcode, FBFCC(2)|(mask), ANNUL|BPRED|FBFCC(~2)|(lose), "8,G",   flags|F_DELAYED, v9 }, \
- { opcode, FBFCC(2)|(mask)|ANNUL, BPRED|FBFCC(~2)|(lose), ",a 8,G",   flags|F_DELAYED, v9 }, \
- { opcode, FBFCC(2)|(mask), ANNUL|BPRED|FBFCC(~2)|(lose), ",N 8,G",   flags|F_DELAYED, v9 }, \
- { opcode, FBFCC(2)|(mask)|ANNUL, BPRED|FBFCC(~2)|(lose), ",a,N 8,G", flags|F_DELAYED, v9 }, \
- { opcode, FBFCC(2)|(mask)|BPRED, ANNUL|FBFCC(~2)|(lose), ",T 8,G",   flags|F_DELAYED, v9 }, \
- { opcode, FBFCC(2)|(mask)|BPRED|ANNUL, FBFCC(~2)|(lose), ",a,T 8,G", flags|F_DELAYED, v9 }, \
- { opcode, FBFCC(3)|(mask), ANNUL|BPRED|FBFCC(~3)|(lose), "9,G",   flags|F_DELAYED, v9 }, \
- { opcode, FBFCC(3)|(mask)|ANNUL, BPRED|FBFCC(~3)|(lose), ",a 9,G",   flags|F_DELAYED, v9 }, \
- { opcode, FBFCC(3)|(mask), ANNUL|BPRED|FBFCC(~3)|(lose), ",N 9,G",   flags|F_DELAYED, v9 }, \
- { opcode, FBFCC(3)|(mask)|ANNUL, BPRED|FBFCC(~3)|(lose), ",a,N  9,G", flags|F_DELAYED, v9 }, \
- { opcode, FBFCC(3)|(mask)|BPRED, ANNUL|FBFCC(~3)|(lose), ",T 9,G",   flags|F_DELAYED, v9 }, \
- { opcode, FBFCC(3)|(mask)|BPRED|ANNUL, FBFCC(~3)|(lose), ",a,T 9,G", flags|F_DELAYED, v9 }
-
-#define condfc(fop, cop, mask, flags) \
-  brfc(fop, F2(0, 6)|COND(mask), F2(~0, ~6)|COND(~(mask)), flags), \
-  brfcx(fop, F2(0, 5)|COND(mask), F2(~0, ~5)|COND(~(mask)), flags), /* v9 */ \
-  brfc(cop, F2(0, 7)|COND(mask), F2(~0, ~7)|COND(~(mask)), flags) \
-
-condfc("fb",   "cb",    0x8, 0),
-condfc("fba",  "cba",   0x8, F_ALIAS),
-condfc("fbe",  "cb0",   0x9, 0),
-condfc("fbg",  "cb2",   0x6, 0),
-condfc("fbge", "cb02",  0xb, 0),
-condfc("fbl",  "cb1",   0x4, 0),
-condfc("fble", "cb01",  0xd, 0),
-condfc("fblg", "cb12",  0x2, 0),
-condfc("fbn",  "cbn",   0x0, 0),
-condfc("fbne", "cb123", 0x1, 0),
-condfc("fbo",  "cb012", 0xf, 0),
-condfc("fbu",  "cb3",   0x7, 0),
-condfc("fbue", "cb03",  0xa, 0),
-condfc("fbug", "cb23",  0x5, 0),
-condfc("fbuge",        "cb023", 0xc, 0),
-condfc("fbul", "cb13",  0x3, 0),
-condfc("fbule",        "cb013", 0xe, 0),
-
-#undef condfc
-#undef brfc
-
-{ "jmp",       F3(2, 0x38, 0), F3(~2, ~0x38, ~0)|RD_G0|ASI(~0),        "1+2", F_DELAYED, v6 }, /* jmpl rs1+rs2,%g0 */
-{ "jmp",       F3(2, 0x38, 0), F3(~2, ~0x38, ~0)|RD_G0|ASI_RS2(~0),    "1", F_DELAYED, v6 }, /* jmpl rs1+%g0,%g0 */
-{ "jmp",       F3(2, 0x38, 1), F3(~2, ~0x38, ~1)|RD_G0,                "1+i", F_DELAYED, v6 }, /* jmpl rs1+i,%g0 */
-{ "jmp",       F3(2, 0x38, 1), F3(~2, ~0x38, ~1)|RD_G0,                "i+1", F_DELAYED, v6 }, /* jmpl i+rs1,%g0 */
-{ "jmp",       F3(2, 0x38, 1), F3(~2, ~0x38, ~1)|RD_G0|RS1_G0, "i", F_DELAYED, v6 }, /* jmpl %g0+i,%g0 */
-
-{ "nop",       F2(0, 4), 0xfeffffff, "", 0, v6 }, /* sethi 0, %g0 */
-
-{ "set",       F2(0x0, 0x4), F2(~0x0, ~0x4), "Sh,d", F_ALIAS, v6 },
-
-{ "sethi",     F2(0x0, 0x4), F2(~0x0, ~0x4), "h,d", 0, v6 },
-
-{ "taddcc",    F3(2, 0x20, 0), F3(~2, ~0x20, ~0)|ASI(~0),      "1,2,d", 0, v6 },
-{ "taddcc",    F3(2, 0x20, 1), F3(~2, ~0x20, ~1),              "1,i,d", 0, v6 },
-{ "taddcc",    F3(2, 0x20, 1), F3(~2, ~0x20, ~1),              "i,1,d", 0, v6 },
-{ "taddcctv",  F3(2, 0x22, 0), F3(~2, ~0x22, ~0)|ASI(~0),      "1,2,d", 0, v6 },
-{ "taddcctv",  F3(2, 0x22, 1), F3(~2, ~0x22, ~1),              "1,i,d", 0, v6 },
-{ "taddcctv",  F3(2, 0x22, 1), F3(~2, ~0x22, ~1),              "i,1,d", 0, v6 },
-
-{ "tsubcc",    F3(2, 0x21, 0), F3(~2, ~0x21, ~0)|ASI(~0),      "1,2,d", 0, v6 },
-{ "tsubcc",    F3(2, 0x21, 1), F3(~2, ~0x21, ~1),              "1,i,d", 0, v6 },
-{ "tsubcctv",  F3(2, 0x23, 0), F3(~2, ~0x23, ~0)|ASI(~0),      "1,2,d", 0, v6 },
-{ "tsubcctv",  F3(2, 0x23, 1), F3(~2, ~0x23, ~1),              "1,i,d", 0, v6 },
-
-/* These two are identical, except in name (v9).  */
-{ "unimp",     F2(0x0, 0x0), 0xffc00000, "n", 0, v6 },
-{ "illegal",   F2(0, 0), F2(~0, ~0), "n", 0, v9 },
-
-{ "iflush",    F3(2, 0x3b, 0), F3(~2, ~0x3b, ~0)|ASI(~0),      "1+2", 0, v6 },
-{ "iflush",    F3(2, 0x3b, 1), F3(~2, ~0x3b, ~1),              "1+i", 0, v6 },
-{ "iflush",    F3(2, 0x3b, 1), F3(~2, ~0x3b, ~1),              "i+1", 0, v6 },
-{ "iflush",    F3(2, 0x3b, 1), F3(~2, ~0x3b, ~1)|RS1_G0,       "i", 0, v6 },
-
-{ "xnor",      F3(2, 0x07, 0), F3(~2, ~0x07, ~0)|ASI(~0),      "1,2,d", 0, v6 },
-{ "xnor",      F3(2, 0x07, 1), F3(~2, ~0x07, ~1),              "1,i,d", 0, v6 },
-{ "xnor",      F3(2, 0x07, 1), F3(~2, ~0x07, ~1),              "i,1,d", 0, v6 },
-{ "xnorcc",    F3(2, 0x17, 0), F3(~2, ~0x17, ~0)|ASI(~0),      "1,2,d", 0, v6 },
-{ "xnorcc",    F3(2, 0x17, 1), F3(~2, ~0x17, ~1),              "1,i,d", 0, v6 },
-{ "xnorcc",    F3(2, 0x17, 1), F3(~2, ~0x17, ~1),              "i,1,d", 0, v6 },
-{ "xor",       F3(2, 0x03, 0), F3(~2, ~0x03, ~0)|ASI(~0),      "1,2,d", 0, v6 },
-{ "xor",       F3(2, 0x03, 1), F3(~2, ~0x03, ~1),              "1,i,d", 0, v6 },
-{ "xor",       F3(2, 0x03, 1), F3(~2, ~0x03, ~1),              "i,1,d", 0, v6 },
-{ "xorcc",     F3(2, 0x13, 0), F3(~2, ~0x13, ~0)|ASI(~0),      "1,2,d", 0, v6 },
-{ "xorcc",     F3(2, 0x13, 1), F3(~2, ~0x13, ~1),              "1,i,d", 0, v6 },
-{ "xorcc",     F3(2, 0x13, 1), F3(~2, ~0x13, ~1),              "i,1,d", 0, v6 },
-
-{ "not",       F3(2, 0x07, 0), F3(~2, ~0x07, ~0)|ASI(~0), "1,d", F_ALIAS, v6 }, /* xnor rs1,%0,rd */
-{ "not",       F3(2, 0x07, 0), F3(~2, ~0x07, ~0)|ASI(~0), "r", F_ALIAS, v6 }, /* xnor rd,%0,rd */
-
-{ "btog",      F3(2, 0x03, 0), F3(~2, ~0x03, ~0)|ASI(~0),      "2,r", F_ALIAS, v6 }, /* xor rd,rs2,rd */
-{ "btog",      F3(2, 0x03, 1), F3(~2, ~0x03, ~1),              "i,r", F_ALIAS, v6 }, /* xor rd,i,rd */
-
-{ "fpop1",     F3F(2, 0x34, 0), F3F(~2, ~0x34, ~1), "[1+2],d", 0, v6 },
-{ "fpop2",     F3F(2, 0x35, 0), F3F(~2, ~0x35, ~1), "[1+2],d", 0, v6 },
-
-/* float-start */
-{ "fdtoi",     F3F(2, 0x34, 0x0d2), F3F(~2, ~0x34, ~0x0d2)|RS1_G0, "B,g", 0, v6 },
-{ "fstoi",     F3F(2, 0x34, 0x0d1), F3F(~2, ~0x34, ~0x0d1)|RS1_G0, "f,g", 0, v6 },
-
- /* all of these conversions are confused and probably wrong. */
-{ "fitod",     F3F(2, 0x34, 0x0c8), F3F(~2, ~0x34, ~0x0c8)|RS1_G0, "f,H", 0, v6 },
-{ "fitos",     F3F(2, 0x34, 0x0c4), F3F(~2, ~0x34, ~0x0c4)|RS1_G0, "f,g", 0, v6 },
-
-{ "fitoq",     F3F(2, 0x34, 0x0cc), F3F(~2, ~0x34, ~0x0cc)|RS1_G0, "f,J", 0, v8 },
-
-{ "fxtoq",     F3F(2, 0x34, 0x08c), F3F(~2, ~0x34, ~0x08c)|RS1_G0, "f,J", 0, v9 },
-
-{ "fdtoq",     F3F(2, 0x34, 0x0ce), F3F(~2, ~0x34, ~0x0ce)|RS1_G0, "B,J", 0, v8 },
-{ "fdtos",     F3F(2, 0x34, 0x0c6), F3F(~2, ~0x34, ~0x0c6)|RS1_G0, "B,g", 0, v6 },
-{ "fqtod",     F3F(2, 0x34, 0x0cb), F3F(~2, ~0x34, ~0x0cb)|RS1_G0, "R,H", 0, v8 },
-{ "fqtos",     F3F(2, 0x34, 0x0c7), F3F(~2, ~0x34, ~0x0c7)|RS1_G0, "R,g", 0, v8 },
-{ "fstod",     F3F(2, 0x34, 0x0c9), F3F(~2, ~0x34, ~0x0c9)|RS1_G0, "f,H", 0, v6 },
-{ "fstoq",     F3F(2, 0x34, 0x0cd), F3F(~2, ~0x34, ~0x0cd)|RS1_G0, "f,J", 0, v8 },
-
-{ "fqtox",     F3F(2, 0x34, 0x083), F3F(~2, ~0x34, ~0x083)|RS1_G0, "R,g", 0, v9 },
-
-{ "fxtos",     F3F(2, 0x34, 0x084), F3F(~2, ~0x34, ~0x084)|RS1_G0, "f,g", 0, v9 },
-
-{ "fdtox",     F3F(2, 0x34, 0x082), F3F(~2, ~0x34, ~0x082)|RS1_G0, "B,g", 0, v9 },
-
-{ "fstox",     F3F(2, 0x34, 0x081), F3F(~2, ~0x34, ~0x081)|RS1_G0, "f,g", 0, v9 },
-
-{ "fqtoi",     F3F(2, 0x34, 0x0d3), F3F(~2, ~0x34, ~0x0d3)|RS1_G0, "R,g", 0, v8 },
-
-{ "fxtod",     F3F(2, 0x34, 0x088), F3F(~2, ~0x34, ~0x088)|RS1_G0, "f,H", 0, v9 },
-
-{ "fdivd",     F3F(2, 0x34, 0x04e), F3F(~2, ~0x34, ~0x04e), "v,B,H", 0, v6 },
-{ "fdivq",     F3F(2, 0x34, 0x04f), F3F(~2, ~0x34, ~0x04f), "V,R,J", 0, v8 },
-{ "fdivs",     F3F(2, 0x34, 0x04d), F3F(~2, ~0x34, ~0x04d), "e,f,g", 0, v6 },
-{ "fmuld",     F3F(2, 0x34, 0x04a), F3F(~2, ~0x34, ~0x04a), "v,B,H", 0, v6 },
-{ "fmulq",     F3F(2, 0x34, 0x04b), F3F(~2, ~0x34, ~0x04b), "V,R,J", 0, v8 },
-{ "fmuls",     F3F(2, 0x34, 0x049), F3F(~2, ~0x34, ~0x049), "e,f,g", 0, v6 },
-
-{ "fdmulq",    F3F(2, 0x34, 0x06e), F3F(~2, ~0x34, ~0x06e), "v,B,J", 0, v8 },
-{ "fsmuld",    F3F(2, 0x34, 0x069), F3F(~2, ~0x34, ~0x069), "e,f,H", 0, v8 },
-
-{ "fsqrtd",    F3F(2, 0x34, 0x02a), F3F(~2, ~0x34, ~0x02a)|RS1_G0, "B,H", 0, v7 },
-{ "fsqrtq",    F3F(2, 0x34, 0x02b), F3F(~2, ~0x34, ~0x02b)|RS1_G0, "R,J", 0, v8 },
-{ "fsqrts",    F3F(2, 0x34, 0x029), F3F(~2, ~0x34, ~0x029)|RS1_G0, "f,g", 0, v7 },
-
-{ "fabsd",     F3F(2, 0x34, 0x00a), F3F(~2, ~0x34, ~0x00a)|RS1_G0, "B,H", 0, v9 },
-{ "fabsq",     F3F(2, 0x34, 0x00b), F3F(~2, ~0x34, ~0x00b)|RS1_G0, "R,J", 0, v6 },
-{ "fabss",     F3F(2, 0x34, 0x009), F3F(~2, ~0x34, ~0x009)|RS1_G0, "f,g", 0, v6 },
-{ "fmovd",     F3F(2, 0x34, 0x002), F3F(~2, ~0x34, ~0x002)|RS1_G0, "B,H", 0, v9 },
-{ "fmovq",     F3F(2, 0x34, 0x003), F3F(~2, ~0x34, ~0x003)|RS1_G0, "R,J", 0, v6 },
-{ "fmovs",     F3F(2, 0x34, 0x001), F3F(~2, ~0x34, ~0x001)|RS1_G0, "f,g", 0, v6 },
-{ "fnegd",     F3F(2, 0x34, 0x006), F3F(~2, ~0x34, ~0x006)|RS1_G0, "B,H", 0, v9 },
-{ "fnegq",     F3F(2, 0x34, 0x007), F3F(~2, ~0x34, ~0x007)|RS1_G0, "R,J", 0, v6 },
-{ "fnegs",     F3F(2, 0x34, 0x005), F3F(~2, ~0x34, ~0x005)|RS1_G0, "f,g", 0, v6 },
-
-{ "popc",      F3(2, 0x2d, 0), F3(~2, ~0x2d, ~0)|(0x3fff<<5),  "2,d", 0, v9 },
-
-{ "faddd",     F3F(2, 0x34, 0x042), F3F(~2, ~0x34, ~0x042), "v,B,H", 0, v6 },
-{ "faddq",     F3F(2, 0x34, 0x043), F3F(~2, ~0x34, ~0x043), "V,R,J", 0, v8 },
-{ "fadds",     F3F(2, 0x34, 0x041), F3F(~2, ~0x34, ~0x041), "e,f,g", 0, v6 },
-{ "fsubd",     F3F(2, 0x34, 0x046), F3F(~2, ~0x34, ~0x046), "v,B,H", 0, v6 },
-{ "fsubq",     F3F(2, 0x34, 0x047), F3F(~2, ~0x34, ~0x047), "V,R,J", 0, v8 },
-{ "fsubs",     F3F(2, 0x34, 0x045), F3F(~2, ~0x34, ~0x045), "e,f,g", 0, v6 },
-
-#define CMPFCC(x)      (((x)&0x3)<<25)
-
-{ "fcmpd",               F3F(2, 0x35, 0x052),            F3F(~2, ~0x35, ~0x052)|RS1_G0, "v,B",   0, v6 },
-{ "fcmpd",     CMPFCC(0)|F3F(2, 0x35, 0x052), CMPFCC(~0)|F3F(~2, ~0x35, ~0x052),        "6,v,B", 0, v9 },
-{ "fcmpd",     CMPFCC(1)|F3F(2, 0x35, 0x052), CMPFCC(~1)|F3F(~2, ~0x35, ~0x052),        "7,v,B", 0, v9 },
-{ "fcmpd",     CMPFCC(2)|F3F(2, 0x35, 0x052), CMPFCC(~2)|F3F(~2, ~0x35, ~0x052),        "8,v,B", 0, v9 },
-{ "fcmpd",     CMPFCC(3)|F3F(2, 0x35, 0x052), CMPFCC(~3)|F3F(~2, ~0x35, ~0x052),        "9,v,B", 0, v9 },
-{ "fcmped",              F3F(2, 0x35, 0x056),            F3F(~2, ~0x35, ~0x056)|RS1_G0, "v,B",   0, v6 },
-{ "fcmped",    CMPFCC(0)|F3F(2, 0x35, 0x056), CMPFCC(~0)|F3F(~2, ~0x35, ~0x056),        "6,v,B", 0, v9 },
-{ "fcmped",    CMPFCC(1)|F3F(2, 0x35, 0x056), CMPFCC(~1)|F3F(~2, ~0x35, ~0x056),        "7,v,B", 0, v9 },
-{ "fcmped",    CMPFCC(2)|F3F(2, 0x35, 0x056), CMPFCC(~2)|F3F(~2, ~0x35, ~0x056),        "8,v,B", 0, v9 },
-{ "fcmped",    CMPFCC(3)|F3F(2, 0x35, 0x056), CMPFCC(~3)|F3F(~2, ~0x35, ~0x056),        "9,v,B", 0, v9 },
-{ "fcmpeq",              F3F(2, 0x34, 0x057),            F3F(~2, ~0x34, ~0x057),        "V,R", 0, v8 },
-{ "fcmpeq",    CMPFCC(0)|F3F(2, 0x35, 0x057), CMPFCC(~0)|F3F(~2, ~0x35, ~0x057),        "6,V,R", 0, v9 },
-{ "fcmpeq",    CMPFCC(1)|F3F(2, 0x35, 0x057), CMPFCC(~1)|F3F(~2, ~0x35, ~0x057),        "7,V,R", 0, v9 },
-{ "fcmpeq",    CMPFCC(2)|F3F(2, 0x35, 0x057), CMPFCC(~2)|F3F(~2, ~0x35, ~0x057),        "8,V,R", 0, v9 },
-{ "fcmpeq",    CMPFCC(3)|F3F(2, 0x35, 0x057), CMPFCC(~3)|F3F(~2, ~0x35, ~0x057),        "9,V,R", 0, v9 },
-{ "fcmpes",              F3F(2, 0x35, 0x055),            F3F(~2, ~0x35, ~0x055)|RS1_G0, "e,f",   0, v6 },
-{ "fcmpes",    CMPFCC(0)|F3F(2, 0x35, 0x055), CMPFCC(~0)|F3F(~2, ~0x35, ~0x055),        "6,e,f", 0, v9 },
-{ "fcmpes",    CMPFCC(1)|F3F(2, 0x35, 0x055), CMPFCC(~1)|F3F(~2, ~0x35, ~0x055),        "7,e,f", 0, v9 },
-{ "fcmpes",    CMPFCC(2)|F3F(2, 0x35, 0x055), CMPFCC(~2)|F3F(~2, ~0x35, ~0x055),        "8,e,f", 0, v9 },
-{ "fcmpes",    CMPFCC(3)|F3F(2, 0x35, 0x055), CMPFCC(~3)|F3F(~2, ~0x35, ~0x055),        "9,e,f", 0, v9 },
-{ "fcmpq",               F3F(2, 0x34, 0x053),            F3F(~2, ~0x34, ~0x053),        "V,R", 0, v8 },
-{ "fcmpq",     CMPFCC(0)|F3F(2, 0x35, 0x053), CMPFCC(~0)|F3F(~2, ~0x35, ~0x053),        "6,V,R", 0, v9 },
-{ "fcmpq",     CMPFCC(1)|F3F(2, 0x35, 0x053), CMPFCC(~1)|F3F(~2, ~0x35, ~0x053),        "7,V,R", 0, v9 },
-{ "fcmpq",     CMPFCC(2)|F3F(2, 0x35, 0x053), CMPFCC(~2)|F3F(~2, ~0x35, ~0x053),        "8,V,R", 0, v9 },
-{ "fcmpq",     CMPFCC(3)|F3F(2, 0x35, 0x053), CMPFCC(~3)|F3F(~2, ~0x35, ~0x053),        "9,V,R", 0, v9 },
-{ "fcmps",               F3F(2, 0x35, 0x051),            F3F(~2, ~0x35, ~0x051)|RS1_G0, "e,f",   0, v6 },
-{ "fcmps",     CMPFCC(0)|F3F(2, 0x35, 0x051), CMPFCC(~0)|F3F(~2, ~0x35, ~0x051),        "6,e,f", 0, v9 },
-{ "fcmps",     CMPFCC(1)|F3F(2, 0x35, 0x051), CMPFCC(~1)|F3F(~2, ~0x35, ~0x051),        "7,e,f", 0, v9 },
-{ "fcmps",     CMPFCC(2)|F3F(2, 0x35, 0x051), CMPFCC(~2)|F3F(~2, ~0x35, ~0x051),        "8,e,f", 0, v9 },
-{ "fcmps",     CMPFCC(3)|F3F(2, 0x35, 0x051), CMPFCC(~3)|F3F(~2, ~0x35, ~0x051),        "9,e,f", 0, v9 },
-
-/* IMPDEP* is a v9 replacement for cpop*.  */
-{ "cpop1",     F3(2, 0x36, 0), F3(~2, ~0x36, ~1), "[1+2],d", 0, v6 },
-{ "cpop2",     F3(2, 0x37, 0), F3(~2, ~0x37, ~1), "[1+2],d", 0, v6 },
-{ "impdep1",   F3(2, 0x36, 0), F3(~2, ~0x36, ~1), "[1+2],d", F_ALIAS, v9 },
-{ "impdep2",   F3(2, 0x37, 0), F3(~2, ~0x37, ~1), "[1+2],d", F_ALIAS, v9 },
-    
-{ "casx",      F3(3, 0x0c, 1), F3(~3, ~0x0c, ~1), "[1],2,d", 0, v9 },
-{ "casxa",     F3(3, 0x1c, 1), F3(~3, ~0x1c, ~1), "[1]A,2,d", 0, v9 },
-{ "cas",       F3(3, 0x0c, 0), F3(~3, ~0x0c, ~0), "[1],2,d", 0, v9 },
-{ "casa",      F3(3, 0x1c, 0), F3(~3, ~0x1c, ~0), "[1]A,2,d", 0, v9 },
-
-{ "fmaddd",    F3(2, 0x35, 0)|OPF_LOW(0xa), F3(~2, ~0x35, ~0)|OPF_LOW(~0xa), "v,B,u,H", 0, v9 },
-{ "fmaddq",    F3(2, 0x35, 0)|OPF_LOW(0xb), F3(~2, ~0x35, ~0)|OPF_LOW(~0xb), "V,R,U,J", 0, v9 },
-{ "fmadds",    F3(2, 0x35, 0)|OPF_LOW(0x9), F3(~2, ~0x35, ~0)|OPF_LOW(~0x9), "e,f,j,g", 0, v9 },
-{ "fmsubd",    F3(2, 0x35, 0)|OPF_LOW(0xe), F3(~2, ~0x35, ~0)|OPF_LOW(~0xe), "v,B,u,H", 0, v9 },
-{ "fmsubq",    F3(2, 0x35, 0)|OPF_LOW(0xf), F3(~2, ~0x35, ~0)|OPF_LOW(~0xf), "V,R,U,J", 0, v9 },
-{ "fmsubs",    F3(2, 0x35, 0)|OPF_LOW(0xd), F3(~2, ~0x35, ~0)|OPF_LOW(~0xd), "e,f,j,g", 0, v9 },
-
-};
-
-const int bfd_sparc_num_opcodes = ((sizeof sparc_opcodes)/(sizeof sparc_opcodes[0]));
diff --git a/bfd/scanit b/bfd/scanit
deleted file mode 100755 (executable)
index 27eee02..0000000
+++ /dev/null
@@ -1,24 +0,0 @@
-#!/bin/sh
-# Script to coordinate parsing of S. Chamberlain source-embedded 
-# documentation markup language.
-
-# Four passes:
-#      1) awk discards lines not intended for docn, and marks blocks of
-#         text with comments identifying source file;
-#      2) first sed pass interprets Chamberlain markup;
-#      3) second sed pass does cleanup that involves merging lines
-#      4) third sed pass does remaining cleans up---making {}
-#         printable within examples, and eliminating empty index entries and
-#          headings.
-#Third and second sed passes are separate because order of execution is hard
-#to control otherwise, making one or another of the things involving @example
-#inoperative.
-
-base=`echo $1 | cut -d '.' -f 1`
-
-awk -f awkscan $1 | \
-sed -f sedscript | \
-sed -f unPROTO | \
-sed -f exmerge  | \
-sed -f exfilter  >$base.texi
-
diff --git a/bfd/scanph b/bfd/scanph
deleted file mode 100755 (executable)
index 46912c3..0000000
+++ /dev/null
@@ -1,25 +0,0 @@
-#!/bin/sh
-# Script to coordinate parsing of S. Chamberlain source-embedded 
-# header-file markup language. 
-
-# '-i' option means use *proto-internal* segments, else just *proto*
-SFX=p
-if [ $1 = "-i" ]; then
-       SFX=ip
-       shift
-fi
-
-base=`echo $1 | cut -d '.' -f 1`
-
-#  passes:
-#      1) awk discards lines not intended for header, and marks blocks of
-#         text with comments identifying source file;
-#      2) first sed pass interprets Chamberlain markup;
-#      3) further sed passes clean up---merging adjacent comments etc.
-
-awk -f awkscan-$SFX $1 |\
-sed -f sedscript-p |\
-sed -f mergecom-p |\
-sed -f startcom-p  |\
-sed -f blins-p |\
-sed -f movecom-p  >$base.$SFX
diff --git a/bfd/sedscript b/bfd/sedscript
deleted file mode 100755 (executable)
index e8e225d..0000000
+++ /dev/null
@@ -1,85 +0,0 @@
-# SED script for preprocessing embedded doc from source (S. Chamberlain markup)
-# middle pass; most of the work is done here.
-#
-# First, get rid of /*doc* markers; they've done their job in the first pass.
-/^\/\*doc\*/d
-#
-# /*proto* markers may be optionally followed by a *i-style subsubsec, findex
-# entry.  This will generate empty @findex and @subsubsection entries if
-# the *proto* is on a line by itself; third pass removes them.
-/^\/\*proto\*/s/^\/\*proto\* *\(.*\)$/@findex \1\
-@subsubsection @code{\1}/
-#
-# /*proto-internal* is just like /*proto* from doc point of view.
-/^\/\*proto-internal\*/s/^\/\*proto-internal\* *\(.*\)$/@findex \1\
-@subsubsection @code{\1}/
-#
-# *i at beginning of line: rest of line is both a subsubsection heading
-#   and an entry in function index.
-/^\*i/s/^\*i *\(.*\)$/@findex \1\
-@subsubsection @code{\1}/
-#
-# Two alternative docn block ends, '*/' and '*-*/' on lines by themselves;
-# replace by blank lines (for texinfo source readability).
-/^\*\/$/c\
-
-/^\*-\*\/$/c\
-
-# {* and *} are standins for comment markers (originally embedded in .c 
-# comments)---turn into real comment markers:
-s/{\*/\/\*/
-s/\*}/\*\//
-#
-# '*+++' and '*---' span a block of text that includes both example lines 
-# (marked by leading '$') and explanatory text (to be italicized).
-# Italicize lines lacking '$':
-/\*\+\+\+/,/\*---/s/^\([^$].*\)$/@i{\1}/
-#
-# We don't need *+++ and *--- markers any more; kill them (trailing marker
-# becomes blank line for readability)
-/\*\+\+\+/d
-/\*---/c\
-
-# Any line beginning with '$' is made an example line; third pass later 
-# coalesces adjacent example blocks.  *DO NOT* introduce extra space after
-# @end example, so we can spot adjacent ones in third pass.
-/^\$/i\
-@example
-/^\$/a\
-@end example
-#
-# In any example line, turn '{' and '}' into '@{' and '@}'
-###/^\$/s/{/@{/g
-###/^\$/s/}/@}/g
-#
-# Now delete the '$' markers themselves:
-/^\$/s/\$//
-#
-# *+ and *- delimit large examples to be enclosed in cartouches.
-/^\*\+$/c\
-@lisp\
-@cartouche
-/^\*-$/c\
-@end cartouche\
-@end lisp\
-
-# '*;' introduces an example which may have a single line or multiple lines;
-# it extends until the next semicolon (which is also printed).
-# One-line case: (do this first; else second line address for multi-line case
-# will include random text til we happen to end a line in a doc comment with
-# a semicolon)
-/^\*;.*;$/{
-s/^\*;/@example\
-/
-s/;$/;\
-@end example\
-/
-}
-# Multi-line case:
-/^\*;/,/.*;$/{
-s/^\*;/@example\
-/
-s/;$/;\
-@end example\
-/
-}
diff --git a/bfd/sedscript-p b/bfd/sedscript-p
deleted file mode 100755 (executable)
index 1f24900..0000000
+++ /dev/null
@@ -1,63 +0,0 @@
-# SED script for preprocessing embedded headers from source 
-# (S. Chamberlain markup)
-# middle pass; most of the work is done here.
-#
-# First, get rid of /*proto* markers; they've done their job in the first pass.
-# (They remain comment-introducers)
-/^\/\*proto\*/s/^\/\*proto\*/\/*/
-/^\/\*proto-internal\*/s/^\/\*proto-internal\*/\/*/
-#
-# *-*/ is an alternative (older) comment-block end.  Remap for uniformity:
-s/^\*-\*\//\*\//
-#
-# {* and *} are standins for comment markers (originally embedded in .c 
-# comments)---turn into real comment markers:
-s/{\*/\/\*/
-s/\*}/\*\//
-#
-# '*+++' and '*---' span a block of text that includes both header lines 
-# (marked by leading '$') and explanatory text (to be comments).
-# No need to start comment at "*+++", or end it at "*---", since we're 
-# already in a *proto* comment block.  Just delete.
-/\*\+\+\+/d
-/\*---/d
-#
-# Any line beginning with '$' is made a line of code in the header; 
-#  stuff in between is comments, so *precede* each '$' line with 
-#  END-comment, *follow* each '$' line with START-comment; third pass later 
-#  eliminates empty comment blocks.
-/^\$/i\
-*/
-/^\$/a\
-/*
-#
-# Now delete the '$' markers themselves:
-/^\$/s/\$//
-#
-# *+ and *- delimit larger blocks of code, treated the same as '$' lines
-/^\*\+$/c\
-*/
-/^\*-$/c\
-/*
-#
-# '*;' introduces code which may have a single line or multiple lines;
-# it extends until the next semicolon (which is also printed).
-#
-# One-line case: (do this first; else second line address for multi-line case
-# will include random text til we happen to end a line in a proto comment with
-# a semicolon)
-/^\*;.*;$/{
-s/^\*;/*\/\
-/
-s/;$/;\
-\/*\
-/
-}
-# Multi-line case:
-/^\*;/,/.*;$/{
-s/^\*;/*\/\
-/
-s/;$/;\
-\/*\
-/
-}
diff --git a/bfd/sparc-opc.c b/bfd/sparc-opc.c
deleted file mode 100644 (file)
index 86405f1..0000000
+++ /dev/null
@@ -1,1870 +0,0 @@
-/* to sanitize this file, grep -v v9 < sparc.h > clean-sparc.h */
-
-/* Table of opcodes for the sparc.
-       Copyright 1989, 1991, 1992 Free Software Foundation, Inc.
-
-This file is part of the BFD library.
-
-BFD is free software; you can redistribute it and/or modify it under
-the terms of the GNU General Public License as published by the Free
-Software Foundation; either version 2, or (at your option) any later
-version.
-
-BFD is distributed in the hope that it will be useful, but WITHOUT ANY
-WARRANTY; without even the implied warranty of MERCHANTABILITY or
-FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-for more details.
-
-You should have received a copy of the GNU General Public License
-along with this software; see the file COPYING.  If not, write to
-the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-/* FIXME-someday: perhaps the ,a's and such should be embedded in the
-   instruction's name rather than the args.  This would make gas faster, pinsn
-   slower, but would mess up some macros a bit.  xoxorich. */
-
-#include <stdio.h>
-#include "ansidecl.h"
-#define BFD_EMIT_TABLE
-#include "opcode/sparc.h"
-
-const char *architecture_pname[] = {
-       "v6",
-       "v7",
-       "v8",
-       "sparclite",
-       "v9",
-       NULL,
-};
-
-/* v9: This file is correct for SPARC Version 9 Draft 1.0.4.  */
-
-#define COND(x)                (((x)&0xf)<<25)
-#define MCOND(x,i_or_f)        ((((i_or_f)&1)<<18)|(((x)>>11)&(0xf<<14)))      /* v9 */
-
-#define CONDA  (COND(0x8))
-#define CONDCC (COND(0xd))
-#define CONDCS (COND(0x5))
-#define CONDE  (COND(0x1))
-#define CONDG  (COND(0xa))
-#define CONDGE (COND(0xb))
-#define CONDGU (COND(0xc))
-#define CONDL  (COND(0x3))
-#define CONDLE (COND(0x2))
-#define CONDLEU        (COND(0x4))
-#define CONDN  (COND(0x0))
-#define CONDNE (COND(0x9))
-#define CONDNEG        (COND(0x6))
-#define CONDPOS        (COND(0xe))
-#define CONDVC (COND(0xf))
-#define CONDVS (COND(0x7))
-
-#define CONDNZ CONDNE
-#define CONDZ  CONDE
-#define CONDGEU        CONDCC
-#define CONDLU CONDCS
-
-#define FCONDA         (COND(0x8))
-#define FCONDE         (COND(0x9))
-#define FCONDG         (COND(0x6))
-#define FCONDGE                (COND(0xb))
-#define FCONDL         (COND(0x4))
-#define FCONDLE                (COND(0xd))
-#define FCONDLG                (COND(0x2))
-#define FCONDN         (COND(0x0))
-#define FCONDNE                (COND(0x1))
-#define FCONDO         (COND(0xf))
-#define FCONDU         (COND(0x7))
-#define FCONDUE                (COND(0xa))
-#define FCONDUG                (COND(0x5))
-#define FCONDUGE       (COND(0xc))
-#define FCONDUL                (COND(0x3))
-#define FCONDULE       (COND(0xe))
-
-#define FCONDNZ        FCONDNE
-#define FCONDZ FCONDE
-
-#define ICC (0)        /* v9 */
-#define XCC (1<<11) /* v9 */
-#define FCC(x) (((x)&0x3)<<11) /* v9 */
-#define FBFCC(x)       (((x)&0x3)<<20) /* v9 */
-
-/* The order of the opcodes in the table is significant:
-       
-       * The assembler requires that all instances of the same mnemonic must
-       be consecutive. If they aren't, the assembler will bomb at runtime.
-
-       * The disassembler should not care about the order of the opcodes.
-
-*/
-
-struct sparc_opcode sparc_opcodes[] = {
-
-{ "ld",        F3(3, 0x00, 0), F3(~3, ~0x00, ~0),              "[1+2],d", 0, v6 },
-{ "ld",        F3(3, 0x00, 0), F3(~3, ~0x00, ~0)|RS2_G0,       "[1],d", 0, v6 }, /* ld [rs1+%g0],d */
-{ "ld",        F3(3, 0x00, 1), F3(~3, ~0x00, ~1),              "[1+i],d", 0, v6 },
-{ "ld",        F3(3, 0x00, 1), F3(~3, ~0x00, ~1),              "[i+1],d", 0, v6 },
-{ "ld",        F3(3, 0x00, 1), F3(~3, ~0x00, ~1)|RS1_G0,       "[i],d", 0, v6 },
-{ "ld",        F3(3, 0x00, 1), F3(~3, ~0x00, ~1)|SIMM13(~0),   "[1],d", 0, v6 }, /* ld [rs1+0],d */
-{ "ld",        F3(3, 0x20, 0), F3(~3, ~0x20, ~0),              "[1+2],g", 0, v6 },
-{ "ld",        F3(3, 0x20, 0), F3(~3, ~0x20, ~0)|RS2_G0,       "[1],g", 0, v6 }, /* ld [rs1+%g0],d */
-{ "ld",        F3(3, 0x20, 1), F3(~3, ~0x20, ~1),              "[1+i],g", 0, v6 },
-{ "ld",        F3(3, 0x20, 1), F3(~3, ~0x20, ~1),              "[i+1],g", 0, v6 },
-{ "ld",        F3(3, 0x20, 1), F3(~3, ~0x20, ~1)|RS1_G0,       "[i],g", 0, v6 },
-{ "ld",        F3(3, 0x20, 1), F3(~3, ~0x20, ~1)|SIMM13(~0),   "[1],g", 0, v6 }, /* ld [rs1+0],d */
-
-{ "ld",        F3(3, 0x21, 0), F3(~3, ~0x21, ~0)|RD(~0),       "[1+2],F", 0, v6 },
-{ "ld",        F3(3, 0x21, 0), F3(~3, ~0x21, ~0)|RS2_G0|RD(~0),"[1],F", 0, v6 }, /* ld [rs1+%g0],d */
-{ "ld",        F3(3, 0x21, 1), F3(~3, ~0x21, ~1)|RD(~0),       "[1+i],F", 0, v6 },
-{ "ld",        F3(3, 0x21, 1), F3(~3, ~0x21, ~1)|RD(~0),       "[i+1],F", 0, v6 },
-{ "ld",        F3(3, 0x21, 1), F3(~3, ~0x21, ~1)|RS1_G0|RD(~0),"[i],F", 0, v6 },
-{ "ld",        F3(3, 0x21, 1), F3(~3, ~0x21, ~1)|SIMM13(~0)|RD(~0),"[1],F", 0, v6 }, /* ld [rs1+0],d */
-
-/* FIXME These are marked F_ALIAS, so that they won't conflict with new v9
-   insns when v9 is present.  Otherwise, the F_ALIAS flag is ignored.  */
-{ "ld",        F3(3, 0x30, 0), F3(~3, ~0x30, ~0),              "[1+2],D", F_ALIAS, v6 },
-{ "ld",        F3(3, 0x30, 0), F3(~3, ~0x30, ~0)|RS2_G0,       "[1],D", F_ALIAS, v6 }, /* ld [rs1+%g0],d */
-{ "ld",        F3(3, 0x30, 1), F3(~3, ~0x30, ~1),              "[1+i],D", F_ALIAS, v6 },
-{ "ld",        F3(3, 0x30, 1), F3(~3, ~0x30, ~1),              "[i+1],D", F_ALIAS, v6 },
-{ "ld",        F3(3, 0x30, 1), F3(~3, ~0x30, ~1)|RS1_G0,       "[i],D", F_ALIAS, v6 },
-{ "ld",        F3(3, 0x30, 1), F3(~3, ~0x30, ~1)|SIMM13(~0),   "[1],D", F_ALIAS, v6 }, /* ld [rs1+0],d */
-{ "ld",        F3(3, 0x31, 0), F3(~3, ~0x31, ~0),              "[1+2],C", 0, v6 },
-{ "ld",        F3(3, 0x31, 0), F3(~3, ~0x31, ~0)|RS2_G0,       "[1],C", 0, v6 }, /* ld [rs1+%g0],d */
-{ "ld",        F3(3, 0x31, 1), F3(~3, ~0x31, ~1),              "[1+i],C", 0, v6 },
-{ "ld",        F3(3, 0x31, 1), F3(~3, ~0x31, ~1),              "[i+1],C", 0, v6 },
-{ "ld",        F3(3, 0x31, 1), F3(~3, ~0x31, ~1)|RS1_G0,       "[i],C", 0, v6 },
-{ "ld",        F3(3, 0x31, 1), F3(~3, ~0x31, ~1)|SIMM13(~0),   "[1],C", 0, v6 }, /* ld [rs1+0],d */
-
-/* The v9 LDUW is the same as the old 'ld' opcode, it is not the same as the
-   'ld' pseudo-op in v9.  */
-{ "lduw",      F3(3, 0x00, 0), F3(~3, ~0x00, ~0),              "[1+2],d", F_ALIAS, v9 },
-{ "lduw",      F3(3, 0x00, 0), F3(~3, ~0x00, ~0)|RS2_G0,       "[1],d", F_ALIAS, v9 }, /* ld [rs1+%g0],d */
-{ "lduw",      F3(3, 0x00, 1), F3(~3, ~0x00, ~1),              "[1+i],d", F_ALIAS, v9 },
-{ "lduw",      F3(3, 0x00, 1), F3(~3, ~0x00, ~1),              "[i+1],d", F_ALIAS, v9 },
-{ "lduw",      F3(3, 0x00, 1), F3(~3, ~0x00, ~1)|RS1_G0,       "[i],d", F_ALIAS, v9 },
-{ "lduw",      F3(3, 0x00, 1), F3(~3, ~0x00, ~1)|SIMM13(~0),   "[1],d", F_ALIAS, v9 }, /* ld [rs1+0],d */
-
-{ "ldd",       F3(3, 0x03, 0), F3(~3, ~0x03, ~0)|ASI(~0),      "[1+2],d", 0, v6 },
-{ "ldd",       F3(3, 0x03, 0), F3(~3, ~0x03, ~0)|ASI_RS2(~0),  "[1],d", 0, v6 }, /* ldd [rs1+%g0],d */
-{ "ldd",       F3(3, 0x03, 1), F3(~3, ~0x03, ~1),              "[1+i],d", 0, v6 },
-{ "ldd",       F3(3, 0x03, 1), F3(~3, ~0x03, ~1),              "[i+1],d", 0, v6 },
-{ "ldd",       F3(3, 0x03, 1), F3(~3, ~0x03, ~1)|RS1_G0,       "[i],d", 0, v6 },
-{ "ldd",       F3(3, 0x03, 1), F3(~3, ~0x03, ~1)|SIMM13(~0),   "[1],d", 0, v6 }, /* ldd [rs1+0],d */
-{ "ldd",       F3(3, 0x23, 0), F3(~3, ~0x23, ~0)|ASI(~0),      "[1+2],H", 0, v6 },
-{ "ldd",       F3(3, 0x23, 0), F3(~3, ~0x23, ~0)|ASI_RS2(~0),  "[1],H", 0, v6 }, /* ldd [rs1+%g0],d */
-{ "ldd",       F3(3, 0x23, 1), F3(~3, ~0x23, ~1),              "[1+i],H", 0, v6 },
-{ "ldd",       F3(3, 0x23, 1), F3(~3, ~0x23, ~1),              "[i+1],H", 0, v6 },
-{ "ldd",       F3(3, 0x23, 1), F3(~3, ~0x23, ~1)|RS1_G0,       "[i],H", 0, v6 },
-{ "ldd",       F3(3, 0x23, 1), F3(~3, ~0x23, ~1)|SIMM13(~0),   "[1],H", 0, v6 }, /* ldd [rs1+0],d */
-/* FIXME These are marked F_ALIAS, so that they won't conflict with new v9
-   insns when v9 is present.  Otherwise, the F_ALIAS flag is ignored.  */
-{ "ldd",       F3(3, 0x33, 0), F3(~3, ~0x33, ~0)|ASI(~0),      "[1+2],D", F_ALIAS, v6 },
-{ "ldd",       F3(3, 0x33, 0), F3(~3, ~0x33, ~0)|ASI_RS2(~0),  "[1],D", F_ALIAS, v6 }, /* ldd [rs1+%g0],d */
-{ "ldd",       F3(3, 0x33, 1), F3(~3, ~0x33, ~1),              "[1+i],D", F_ALIAS, v6 },
-{ "ldd",       F3(3, 0x33, 1), F3(~3, ~0x33, ~1),              "[i+1],D", F_ALIAS, v6 },
-{ "ldd",       F3(3, 0x33, 1), F3(~3, ~0x33, ~1)|RS1_G0,       "[i],D", F_ALIAS, v6 },
-{ "ldd",       F3(3, 0x33, 1), F3(~3, ~0x33, ~1)|SIMM13(~0),   "[1],D", F_ALIAS, v6 }, /* ldd [rs1+0],d */
-
-{ "ldq",       F3(3, 0x22, 0), F3(~3, ~0x22, ~0)|ASI(~0),      "[1+2],J", 0, v9 },
-{ "ldq",       F3(3, 0x22, 0), F3(~3, ~0x22, ~0)|ASI_RS2(~0),  "[1],J", 0, v9 }, /* ldd [rs1+%g0],d */
-{ "ldq",       F3(3, 0x22, 1), F3(~3, ~0x22, ~1),              "[1+i],J", 0, v9 },
-{ "ldq",       F3(3, 0x22, 1), F3(~3, ~0x22, ~1),              "[i+1],J", 0, v9 },
-{ "ldq",       F3(3, 0x22, 1), F3(~3, ~0x22, ~1)|RS1_G0,       "[i],J", 0, v9 },
-{ "ldq",       F3(3, 0x22, 1), F3(~3, ~0x22, ~1)|SIMM13(~0),   "[1],J", 0, v9 }, /* ldd [rs1+0],d */
-
-{ "ldsb",      F3(3, 0x09, 0), F3(~3, ~0x09, ~0)|ASI(~0),      "[1+2],d", 0, v6 },
-{ "ldsb",      F3(3, 0x09, 0), F3(~3, ~0x09, ~0)|ASI_RS2(~0),  "[1],d", 0, v6 }, /* ldsb [rs1+%g0],d */
-{ "ldsb",      F3(3, 0x09, 1), F3(~3, ~0x09, ~1),              "[1+i],d", 0, v6 },
-{ "ldsb",      F3(3, 0x09, 1), F3(~3, ~0x09, ~1),              "[i+1],d", 0, v6 },
-{ "ldsb",      F3(3, 0x09, 1), F3(~3, ~0x09, ~1)|RS1_G0,       "[i],d", 0, v6 },
-{ "ldsb",      F3(3, 0x09, 1), F3(~3, ~0x09, ~1)|SIMM13(~0),   "[1],d", 0, v6 }, /* ldsb [rs1+0],d */
-
-{ "ldsh",      F3(3, 0x0a, 0), F3(~3, ~0x0a, ~0)|ASI_RS2(~0),  "[1],d", 0, v6 }, /* ldsh [rs1+%g0],d */
-{ "ldsh",      F3(3, 0x0a, 0), F3(~3, ~0x0a, ~0)|ASI(~0),      "[1+2],d", 0, v6 },
-{ "ldsh",      F3(3, 0x0a, 1), F3(~3, ~0x0a, ~1),              "[1+i],d", 0, v6 },
-{ "ldsh",      F3(3, 0x0a, 1), F3(~3, ~0x0a, ~1),              "[i+1],d", 0, v6 },
-{ "ldsh",      F3(3, 0x0a, 1), F3(~3, ~0x0a, ~1)|RS1_G0,       "[i],d", 0, v6 },
-{ "ldsh",      F3(3, 0x0a, 1), F3(~3, ~0x0a, ~1)|SIMM13(~0),   "[1],d", 0, v6 }, /* ldsh [rs1+0],d */
-
-{ "ldstub",    F3(3, 0x0d, 0), F3(~3, ~0x0d, ~0)|ASI(~0),      "[1+2],d", 0, v6 },
-{ "ldstub",    F3(3, 0x0d, 0), F3(~3, ~0x0d, ~0)|ASI_RS2(~0),  "[1],d", 0, v6 }, /* ldstub [rs1+%g0],d */
-{ "ldstub",    F3(3, 0x0d, 1), F3(~3, ~0x0d, ~1),              "[1+i],d", 0, v6 },
-{ "ldstub",    F3(3, 0x0d, 1), F3(~3, ~0x0d, ~1),              "[i+1],d", 0, v6 },
-{ "ldstub",    F3(3, 0x0d, 1), F3(~3, ~0x0d, ~1)|RS1_G0,       "[i],d", 0, v6 },
-{ "ldstub",    F3(3, 0x0d, 1), F3(~3, ~0x0d, ~1)|SIMM13(~0),   "[1],d", 0, v6 }, /* ldstub [rs1+0],d */
-
-{ "ldsw",      F3(3, 0x08, 0), F3(~3, ~0x08, ~0)|ASI(~0),      "[1+2],d", 0, v9 },
-{ "ldsw",      F3(3, 0x08, 0), F3(~3, ~0x08, ~0)|ASI_RS2(~0),  "[1],d", 0, v9 }, /* ldsw [rs1+%g0],d */
-{ "ldsw",      F3(3, 0x08, 1), F3(~3, ~0x08, ~1),              "[1+i],d", 0, v9 },
-{ "ldsw",      F3(3, 0x08, 1), F3(~3, ~0x08, ~1),              "[i+1],d", 0, v9 },
-{ "ldsw",      F3(3, 0x08, 1), F3(~3, ~0x08, ~1)|RS1_G0,       "[i],d", 0, v9 },
-{ "ldsw",      F3(3, 0x08, 1), F3(~3, ~0x08, ~1)|SIMM13(~0),   "[1],d", 0, v9 }, /* ldsw [rs1+0],d */
-
-{ "ldub",      F3(3, 0x01, 0), F3(~3, ~0x01, ~0)|ASI(~0),      "[1+2],d", 0, v6 },
-{ "ldub",      F3(3, 0x01, 0), F3(~3, ~0x01, ~0)|ASI_RS2(~0),  "[1],d", 0, v6 }, /* ldub [rs1+%g0],d */
-{ "ldub",      F3(3, 0x01, 1), F3(~3, ~0x01, ~1),              "[1+i],d", 0, v6 },
-{ "ldub",      F3(3, 0x01, 1), F3(~3, ~0x01, ~1),              "[i+1],d", 0, v6 },
-{ "ldub",      F3(3, 0x01, 1), F3(~3, ~0x01, ~1)|RS1_G0,       "[i],d", 0, v6 },
-{ "ldub",      F3(3, 0x01, 1), F3(~3, ~0x01, ~1)|SIMM13(~0),   "[1],d", 0, v6 }, /* ldub [rs1+0],d */
-
-{ "lduh",      F3(3, 0x02, 0), F3(~3, ~0x02, ~0)|ASI(~0),      "[1+2],d", 0, v6 },
-{ "lduh",      F3(3, 0x02, 0), F3(~3, ~0x02, ~0)|ASI_RS2(~0),  "[1],d", 0, v6 }, /* lduh [rs1+%g0],d */
-{ "lduh",      F3(3, 0x02, 1), F3(~3, ~0x02, ~1),              "[1+i],d", 0, v6 },
-{ "lduh",      F3(3, 0x02, 1), F3(~3, ~0x02, ~1),              "[i+1],d", 0, v6 },
-{ "lduh",      F3(3, 0x02, 1), F3(~3, ~0x02, ~1)|RS1_G0,       "[i],d", 0, v6 },
-{ "lduh",      F3(3, 0x02, 1), F3(~3, ~0x02, ~1)|SIMM13(~0),   "[1],d", 0, v6 }, /* lduh [rs1+0],d */
-
-{ "ldx",       F3(3, 0x0b, 0), F3(~3, ~0x0b, ~0)|ASI(~0),      "[1+2],d", 0, v9 },
-{ "ldx",       F3(3, 0x0b, 0), F3(~3, ~0x0b, ~0)|ASI_RS2(~0),  "[1],d", 0, v9 }, /* ldx [rs1+%g0],d */
-{ "ldx",       F3(3, 0x0b, 1), F3(~3, ~0x0b, ~1),              "[1+i],d", 0, v9 },
-{ "ldx",       F3(3, 0x0b, 1), F3(~3, ~0x0b, ~1),              "[i+1],d", 0, v9 },
-{ "ldx",       F3(3, 0x0b, 1), F3(~3, ~0x0b, ~1)|RS1_G0,       "[i],d", 0, v9 },
-{ "ldx",       F3(3, 0x0b, 1), F3(~3, ~0x0b, ~1)|SIMM13(~0),   "[1],d", 0, v9 }, /* ldx [rs1+0],d */
-
-{ "ldx",       F3(3, 0x21, 0)|RD(1), F3(~3, ~0x21, ~0)|RD(~1), "[1+2],F", 0, v9 },
-{ "ldx",       F3(3, 0x21, 0)|RD(1), F3(~3, ~0x21, ~0)|RS2_G0|RD(~1),  "[1],F", 0, v9 }, /* ld [rs1+%g0],d */
-{ "ldx",       F3(3, 0x21, 1)|RD(1), F3(~3, ~0x21, ~1)|RD(~1), "[1+i],F", 0, v9 },
-{ "ldx",       F3(3, 0x21, 1)|RD(1), F3(~3, ~0x21, ~1)|RD(~1), "[i+1],F", 0, v9 },
-{ "ldx",       F3(3, 0x21, 1)|RD(1), F3(~3, ~0x21, ~1)|RS1_G0|RD(~1),  "[i],F", 0, v9 },
-{ "ldx",       F3(3, 0x21, 1)|RD(1), F3(~3, ~0x21, ~1)|SIMM13(~0)|RD(~1),"[1],F", 0, v9 }, /* ld [rs1+0],d */
-
-{ "lda",       F3(3, 0x10, 0), F3(~3, ~0x10, ~0),              "[1+2]A,d", 0, v6 },
-{ "lda",       F3(3, 0x10, 0), F3(~3, ~0x10, ~0)|RS2_G0,       "[1]A,d", 0, v6 }, /* lda [rs1+%g0],d */
-{ "lda",       F3(3, 0x10, 1), F3(~3, ~0x10, ~1),              "[1+i]o,d", 0, v9 },
-{ "lda",       F3(3, 0x10, 1), F3(~3, ~0x10, ~1),              "[i+1]o,d", 0, v9 },
-{ "lda",       F3(3, 0x10, 1), F3(~3, ~0x10, ~1)|RS1_G0,       "[i]o,d", 0, v9 },
-{ "lda",       F3(3, 0x10, 1), F3(~3, ~0x10, ~1)|SIMM13(~0),   "[1]o,d", 0, v9 }, /* ld [rs1+0],d */
-{ "lda",       F3(3, 0x30, 0), F3(~3, ~0x30, ~0),              "[1+2]A,g", 0, v9 },
-{ "lda",       F3(3, 0x30, 0), F3(~3, ~0x30, ~0)|RS2_G0,       "[1]A,g", 0, v9 }, /* lda [rs1+%g0],d */
-{ "lda",       F3(3, 0x30, 1), F3(~3, ~0x30, ~1),              "[1+i]o,g", 0, v9 },
-{ "lda",       F3(3, 0x30, 1), F3(~3, ~0x30, ~1),              "[i+1]o,g", 0, v9 },
-{ "lda",       F3(3, 0x30, 1), F3(~3, ~0x30, ~1)|RS1_G0,       "[i]o,g", 0, v9 },
-{ "lda",       F3(3, 0x30, 1), F3(~3, ~0x30, ~1)|SIMM13(~0),   "[1]o,g", 0, v9 }, /* ld [rs1+0],d */
-
-{ "ldda",      F3(3, 0x13, 0), F3(~3, ~0x13, ~0),              "[1+2]A,d", 0, v6 },
-{ "ldda",      F3(3, 0x13, 0), F3(~3, ~0x13, ~0)|RS2_G0,       "[1]A,d", 0, v6 }, /* ldda [rs1+%g0],d */
-{ "ldda",      F3(3, 0x13, 1), F3(~3, ~0x13, ~1),              "[1+i]o,d", 0, v9 },
-{ "ldda",      F3(3, 0x13, 1), F3(~3, ~0x13, ~1),              "[i+1]o,d", 0, v9 },
-{ "ldda",      F3(3, 0x13, 1), F3(~3, ~0x13, ~1)|RS1_G0,       "[i]o,d", 0, v9 },
-{ "ldda",      F3(3, 0x13, 1), F3(~3, ~0x13, ~1)|SIMM13(~0),   "[1]o,d", 0, v9 }, /* ld [rs1+0],d */
-
-{ "ldda",      F3(3, 0x33, 0), F3(~3, ~0x33, ~0),              "[1+2]A,H", 0, v9 },
-{ "ldda",      F3(3, 0x33, 0), F3(~3, ~0x33, ~0)|RS2_G0,       "[1]A,H", 0, v9 }, /* ldda [rs1+%g0],d */
-{ "ldda",      F3(3, 0x33, 1), F3(~3, ~0x33, ~1),              "[1+i]o,H", 0, v9 },
-{ "ldda",      F3(3, 0x33, 1), F3(~3, ~0x33, ~1),              "[i+1]o,H", 0, v9 },
-{ "ldda",      F3(3, 0x33, 1), F3(~3, ~0x33, ~1)|RS1_G0,       "[i]o,H", 0, v9 },
-{ "ldda",      F3(3, 0x33, 1), F3(~3, ~0x33, ~1)|SIMM13(~0),   "[1]o,H", 0, v9 }, /* ld [rs1+0],d */
-
-{ "ldqa",      F3(3, 0x32, 0), F3(~3, ~0x32, ~0),              "[1+2]A,J", 0, v9 },
-{ "ldqa",      F3(3, 0x32, 0), F3(~3, ~0x32, ~0)|RS2_G0,       "[1]A,J", 0, v9 }, /* ldd [rs1+%g0],d */
-{ "ldqa",      F3(3, 0x32, 1), F3(~3, ~0x32, ~1),              "[1+i]o,J", 0, v9 },
-{ "ldqa",      F3(3, 0x32, 1), F3(~3, ~0x32, ~1),              "[i+1]o,J", 0, v9 },
-{ "ldqa",      F3(3, 0x32, 1), F3(~3, ~0x32, ~1)|RS1_G0,       "[i]o,J", 0, v9 },
-{ "ldqa",      F3(3, 0x32, 1), F3(~3, ~0x32, ~1)|SIMM13(~0),   "[1]o,J", 0, v9 }, /* ldd [rs1+0],d */
-
-{ "ldsba",     F3(3, 0x19, 0), F3(~3, ~0x19, ~0),              "[1+2]A,d", 0, v6 },
-{ "ldsba",     F3(3, 0x19, 0), F3(~3, ~0x19, ~0)|RS2_G0,       "[1]A,d", 0, v6 }, /* ldsba [rs1+%g0],d */
-{ "ldsba",     F3(3, 0x19, 1), F3(~3, ~0x19, ~1),              "[1+i]o,d", 0, v9 },
-{ "ldsba",     F3(3, 0x19, 1), F3(~3, ~0x19, ~1),              "[i+1]o,d", 0, v9 },
-{ "ldsba",     F3(3, 0x19, 1), F3(~3, ~0x19, ~1)|RS1_G0,       "[i]o,d", 0, v9 },
-{ "ldsba",     F3(3, 0x19, 1), F3(~3, ~0x19, ~1)|SIMM13(~0),   "[1]o,d", 0, v9 }, /* ld [rs1+0],d */
-
-{ "ldsha",     F3(3, 0x1a, 0), F3(~3, ~0x1a, ~0),              "[1+2]A,d", 0, v6 },
-{ "ldsha",     F3(3, 0x1a, 0), F3(~3, ~0x1a, ~0)|RS2_G0,       "[1]A,d", 0, v6 }, /* ldsha [rs1+%g0],d */
-{ "ldsha",     F3(3, 0x1a, 1), F3(~3, ~0x1a, ~1),              "[1+i]o,d", 0, v9 },
-{ "ldsha",     F3(3, 0x1a, 1), F3(~3, ~0x1a, ~1),              "[i+1]o,d", 0, v9 },
-{ "ldsha",     F3(3, 0x1a, 1), F3(~3, ~0x1a, ~1)|RS1_G0,       "[i]o,d", 0, v9 },
-{ "ldsha",     F3(3, 0x1a, 1), F3(~3, ~0x1a, ~1)|SIMM13(~0),   "[1]o,d", 0, v9 }, /* ld [rs1+0],d */
-
-{ "ldstuba",   F3(3, 0x1d, 0), F3(~3, ~0x1d, ~0),              "[1+2]A,d", 0, v6 },
-{ "ldstuba",   F3(3, 0x1d, 0), F3(~3, ~0x1d, ~0)|RS2_G0,       "[1]A,d", 0, v6 }, /* ldstuba [rs1+%g0],d */
-{ "ldstuba",   F3(3, 0x1d, 1), F3(~3, ~0x1d, ~1),              "[1+i]o,d", 0, v9 },
-{ "ldstuba",   F3(3, 0x1d, 1), F3(~3, ~0x1d, ~1),              "[i+1]o,d", 0, v9 },
-{ "ldstuba",   F3(3, 0x1d, 1), F3(~3, ~0x1d, ~1)|RS1_G0,       "[i]o,d", 0, v9 },
-{ "ldstuba",   F3(3, 0x1d, 1), F3(~3, ~0x1d, ~1)|SIMM13(~0),   "[1]o,d", 0, v9 }, /* ld [rs1+0],d */
-
-{ "ldswa",     F3(3, 0x18, 0), F3(~3, ~0x18, ~0),              "[1+2]A,d", 0, v9 },
-{ "ldswa",     F3(3, 0x18, 0), F3(~3, ~0x18, ~0)|RS2_G0,       "[1]A,d", 0, v9 }, /* lda [rs1+%g0],d */
-{ "ldswa",     F3(3, 0x18, 1), F3(~3, ~0x18, ~1),              "[1+i]o,d", 0, v9 },
-{ "ldswa",     F3(3, 0x18, 1), F3(~3, ~0x18, ~1),              "[i+1]o,d", 0, v9 },
-{ "ldswa",     F3(3, 0x18, 1), F3(~3, ~0x18, ~1)|RS1_G0,       "[i]o,d", 0, v9 },
-{ "ldswa",     F3(3, 0x18, 1), F3(~3, ~0x18, ~1)|SIMM13(~0),   "[1]o,d", 0, v9 }, /* ld [rs1+0],d */
-
-{ "lduba",     F3(3, 0x11, 0), F3(~3, ~0x11, ~0),              "[1+2]A,d", 0, v6 },
-{ "lduba",     F3(3, 0x11, 0), F3(~3, ~0x11, ~0)|RS2_G0,       "[1]A,d", 0, v6 }, /* lduba [rs1+%g0],d */
-{ "lduba",     F3(3, 0x11, 1), F3(~3, ~0x11, ~1),              "[1+i]o,d", 0, v9 },
-{ "lduba",     F3(3, 0x11, 1), F3(~3, ~0x11, ~1),              "[i+1]o,d", 0, v9 },
-{ "lduba",     F3(3, 0x11, 1), F3(~3, ~0x11, ~1)|RS1_G0,       "[i]o,d", 0, v9 },
-{ "lduba",     F3(3, 0x11, 1), F3(~3, ~0x11, ~1)|SIMM13(~0),   "[1]o,d", 0, v9 }, /* ld [rs1+0],d */
-
-{ "lduha",     F3(3, 0x12, 0), F3(~3, ~0x12, ~0),              "[1+2]A,d", 0, v6 },
-{ "lduha",     F3(3, 0x12, 0), F3(~3, ~0x12, ~0)|RS2_G0,       "[1]A,d", 0, v6 }, /* lduha [rs1+%g0],d */
-{ "lduha",     F3(3, 0x12, 1), F3(~3, ~0x12, ~1),              "[1+i]o,d", 0, v9 },
-{ "lduha",     F3(3, 0x12, 1), F3(~3, ~0x12, ~1),              "[i+1]o,d", 0, v9 },
-{ "lduha",     F3(3, 0x12, 1), F3(~3, ~0x12, ~1)|RS1_G0,       "[i]o,d", 0, v9 },
-{ "lduha",     F3(3, 0x12, 1), F3(~3, ~0x12, ~1)|SIMM13(~0),   "[1]o,d", 0, v9 }, /* ld [rs1+0],d */
-
-{ "lduwa",     F3(3, 0x10, 0), F3(~3, ~0x10, ~0),              "[1+2]A,d", F_ALIAS, v9 }, /* lduwa === lda */
-{ "lduwa",     F3(3, 0x10, 0), F3(~3, ~0x10, ~0)|RS2_G0,       "[1]A,d", F_ALIAS, v9 }, /* lda [rs1+%g0],d */
-{ "lduwa",     F3(3, 0x10, 1), F3(~3, ~0x10, ~1),              "[1+i]o,d", F_ALIAS, v9 },
-{ "lduwa",     F3(3, 0x10, 1), F3(~3, ~0x10, ~1),              "[i+1]o,d", F_ALIAS, v9 },
-{ "lduwa",     F3(3, 0x10, 1), F3(~3, ~0x10, ~1)|RS1_G0,       "[i]o,d", F_ALIAS, v9 },
-{ "lduwa",     F3(3, 0x10, 1), F3(~3, ~0x10, ~1)|SIMM13(~0),   "[1]o,d", F_ALIAS, v9 }, /* ld [rs1+0],d */
-
-{ "ldxa",      F3(3, 0x1b, 0), F3(~3, ~0x1b, ~0),              "[1+2]A,d", 0, v9 }, /* lduwa === lda */
-{ "ldxa",      F3(3, 0x1b, 0), F3(~3, ~0x1b, ~0)|RS2_G0,       "[1]A,d", 0, v9 }, /* lda [rs1+%g0],d */
-{ "ldxa",      F3(3, 0x1b, 1), F3(~3, ~0x1b, ~1),              "[1+i]o,d", 0, v9 },
-{ "ldxa",      F3(3, 0x1b, 1), F3(~3, ~0x1b, ~1),              "[i+1]o,d", 0, v9 },
-{ "ldxa",      F3(3, 0x1b, 1), F3(~3, ~0x1b, ~1)|RS1_G0,       "[i]o,d", 0, v9 },
-{ "ldxa",      F3(3, 0x1b, 1), F3(~3, ~0x1b, ~1)|SIMM13(~0),   "[1]o,d", 0, v9 }, /* ld [rs1+0],d */
-
-{ "st",        F3(3, 0x04, 0), F3(~3, ~0x04, ~0)|ASI(~0),              "d,[1+2]", 0, v6 },
-{ "st",        F3(3, 0x04, 0), F3(~3, ~0x04, ~0)|ASI_RS2(~0),          "d,[1]", 0, v6 }, /* st d,[rs1+%g0] */
-{ "st",        F3(3, 0x04, 1), F3(~3, ~0x04, ~1),                      "d,[1+i]", 0, v6 },
-{ "st",        F3(3, 0x04, 1), F3(~3, ~0x04, ~1),                      "d,[i+1]", 0, v6 },
-{ "st",        F3(3, 0x04, 1), F3(~3, ~0x04, ~1)|RS1_G0,               "d,[i]", 0, v6 },
-{ "st",        F3(3, 0x04, 1), F3(~3, ~0x04, ~1)|SIMM13(~0),           "d,[1]", 0, v6 }, /* st d,[rs1+0] */
-{ "st",        F3(3, 0x24, 0), F3(~3, ~0x24, ~0)|ASI(~0),              "g,[1+2]", 0, v6 },
-{ "st",        F3(3, 0x24, 0), F3(~3, ~0x24, ~0)|ASI_RS2(~0),          "g,[1]", 0, v6 }, /* st d[rs1+%g0] */
-{ "st",        F3(3, 0x24, 1), F3(~3, ~0x24, ~1),                      "g,[1+i]", 0, v6 },
-{ "st",        F3(3, 0x24, 1), F3(~3, ~0x24, ~1),                      "g,[i+1]", 0, v6 },
-{ "st",        F3(3, 0x24, 1), F3(~3, ~0x24, ~1)|RS1_G0,               "g,[i]", 0, v6 },
-{ "st",        F3(3, 0x24, 1), F3(~3, ~0x24, ~1)|SIMM13(~0),           "g,[1]", 0, v6 }, /* st d,[rs1+0] */
-/* FIXME These are marked F_ALIAS, so that they won't conflict with new v9
-   insns when v9 is present.  Otherwise, the F_ALIAS flag is ignored.  */
-{ "st",        F3(3, 0x34, 0), F3(~3, ~0x34, ~0)|ASI(~0),              "D,[1+2]", F_ALIAS, v6 },
-{ "st",        F3(3, 0x34, 0), F3(~3, ~0x34, ~0)|ASI_RS2(~0),          "D,[1]", F_ALIAS, v6 }, /* st d,[rs1+%g0] */
-{ "st",        F3(3, 0x34, 1), F3(~3, ~0x34, ~1),                      "D,[1+i]", F_ALIAS, v6 },
-{ "st",        F3(3, 0x34, 1), F3(~3, ~0x34, ~1),                      "D,[i+1]", F_ALIAS, v6 },
-{ "st",        F3(3, 0x34, 1), F3(~3, ~0x34, ~1)|RS1_G0,               "D,[i]", F_ALIAS, v6 },
-{ "st",        F3(3, 0x34, 1), F3(~3, ~0x34, ~1)|SIMM13(~0),           "D,[1]", F_ALIAS, v6 }, /* st d,[rs1+0] */
-{ "st",        F3(3, 0x35, 0), F3(~3, ~0x35, ~0)|ASI(~0),              "C,[1+2]", 0, v6 },
-{ "st",        F3(3, 0x35, 0), F3(~3, ~0x35, ~0)|ASI_RS2(~0),          "C,[1]", 0, v6 }, /* st d,[rs1+%g0] */
-{ "st",        F3(3, 0x35, 1), F3(~3, ~0x35, ~1),                      "C,[1+i]", 0, v6 },
-{ "st",        F3(3, 0x35, 1), F3(~3, ~0x35, ~1),                      "C,[i+1]", 0, v6 },
-{ "st",        F3(3, 0x35, 1), F3(~3, ~0x35, ~1)|RS1_G0,               "C,[i]", 0, v6 },
-{ "st",        F3(3, 0x35, 1), F3(~3, ~0x35, ~1)|SIMM13(~0),           "C,[1]", 0, v6 }, /* st d,[rs1+0] */
-
-{ "st",        F3(3, 0x25, 0), F3(~3, ~0x25, ~0)|RD_G0|ASI(~0),        "F,[1+2]", 0, v6 },
-{ "st",        F3(3, 0x25, 0), F3(~3, ~0x25, ~0)|RD_G0|ASI_RS2(~0),    "F,[1]", 0, v6 }, /* st d,[rs1+%g0] */
-{ "st",        F3(3, 0x25, 1), F3(~3, ~0x25, ~1)|RD_G0,                "F,[1+i]", 0, v6 },
-{ "st",        F3(3, 0x25, 1), F3(~3, ~0x25, ~1)|RD_G0,                "F,[i+1]", 0, v6 },
-{ "st",        F3(3, 0x25, 1), F3(~3, ~0x25, ~1)|RD_G0|RS1_G0,         "F,[i]", 0, v6 },
-{ "st",        F3(3, 0x25, 1), F3(~3, ~0x25, ~1)|RD_G0|SIMM13(~0),     "F,[1]", 0, v6 }, /* st d,[rs1+0] */
-
-  /* The v9 STW/STUW/STSW are the same as the old 'st' opcode, they are not
-     the same as the 'st' psuedo-op in v9.  */
-{ "stw",       F3(3, 0x04, 0), F3(~3, ~0x04, ~0)|ASI(~0),      "d,[1+2]", F_ALIAS, v9 },
-{ "stw",       F3(3, 0x04, 0), F3(~3, ~0x04, ~0)|ASI_RS2(~0),  "d,[1]", F_ALIAS, v9 }, /* st d,[rs1+%g0] */
-{ "stw",       F3(3, 0x04, 1), F3(~3, ~0x04, ~1),              "d,[1+i]", F_ALIAS, v9 },
-{ "stw",       F3(3, 0x04, 1), F3(~3, ~0x04, ~1),              "d,[i+1]", F_ALIAS, v9 },
-{ "stw",       F3(3, 0x04, 1), F3(~3, ~0x04, ~1)|RS1_G0,       "d,[i]", F_ALIAS, v9 },
-{ "stw",       F3(3, 0x04, 1), F3(~3, ~0x04, ~1)|SIMM13(~0),   "d,[1]", F_ALIAS, v9 }, /* st d,[rs1+0] */
-
-{ "stuw",      F3(3, 0x04, 0), F3(~3, ~0x04, ~0)|ASI(~0),      "d,[1+2]", F_ALIAS, v9 },
-{ "stuw",      F3(3, 0x04, 0), F3(~3, ~0x04, ~0)|ASI_RS2(~0),  "d,[1]", F_ALIAS, v9 }, /* st d,[rs1+%g0] */
-{ "stuw",      F3(3, 0x04, 1), F3(~3, ~0x04, ~1),              "d,[1+i]", F_ALIAS, v9 },
-{ "stuw",      F3(3, 0x04, 1), F3(~3, ~0x04, ~1),              "d,[i+1]", F_ALIAS, v9 },
-{ "stuw",      F3(3, 0x04, 1), F3(~3, ~0x04, ~1)|RS1_G0,       "d,[i]", F_ALIAS, v9 },
-{ "stuw",      F3(3, 0x04, 1), F3(~3, ~0x04, ~1)|SIMM13(~0),   "d,[1]", F_ALIAS, v9 }, /* st d,[rs1+0] */
-
-{ "stsw",      F3(3, 0x04, 0), F3(~3, ~0x04, ~0)|ASI(~0),      "d,[1+2]", F_ALIAS, v9 }, /* stsw === st */
-{ "stsw",      F3(3, 0x04, 0), F3(~3, ~0x04, ~0)|ASI_RS2(~0),  "d,[1]", F_ALIAS, v9 }, /* st d,[rs1+%g0] */
-{ "stsw",      F3(3, 0x04, 1), F3(~3, ~0x04, ~1),              "d,[1+i]", F_ALIAS, v9 },
-{ "stsw",      F3(3, 0x04, 1), F3(~3, ~0x04, ~1),              "d,[i+1]", F_ALIAS, v9 },
-{ "stsw",      F3(3, 0x04, 1), F3(~3, ~0x04, ~1)|RS1_G0,       "d,[i]", F_ALIAS, v9 },
-{ "stsw",      F3(3, 0x04, 1), F3(~3, ~0x04, ~1)|SIMM13(~0),   "d,[1]", F_ALIAS, v9 }, /* st d,[rs1+0] */
-
-{ "sta",       F3(3, 0x14, 0), F3(~3, ~0x14, ~0),              "d,[1+2]A", 0, v6 },
-{ "sta",       F3(3, 0x14, 0), F3(~3, ~0x14, ~0)|RS2(~0),      "d,[1]A", 0, v6 }, /* sta d,[rs1+%g0] */
-{ "sta",       F3(3, 0x14, 1), F3(~3, ~0x14, ~1),              "d,[1+i]o", 0, v9 },
-{ "sta",       F3(3, 0x14, 1), F3(~3, ~0x14, ~1),              "d,[i+1]o", 0, v9 },
-{ "sta",       F3(3, 0x14, 1), F3(~3, ~0x14, ~1)|RS1_G0,       "d,[i]o", 0, v9 },
-{ "sta",       F3(3, 0x14, 1), F3(~3, ~0x14, ~1)|SIMM13(~0),   "d,[1]o", 0, v9 }, /* st d,[rs1+0] */
-
-{ "sta",       F3(3, 0x34, 0), F3(~3, ~0x34, ~0),              "g,[1+2]A", 0, v9 },
-{ "sta",       F3(3, 0x34, 0), F3(~3, ~0x34, ~0)|RS2(~0),      "g,[1]A", 0, v9 }, /* sta d,[rs1+%g0] */
-{ "sta",       F3(3, 0x34, 1), F3(~3, ~0x34, ~1),              "g,[1+i]o", 0, v9 },
-{ "sta",       F3(3, 0x34, 1), F3(~3, ~0x34, ~1),              "g,[i+1]o", 0, v9 },
-{ "sta",       F3(3, 0x34, 1), F3(~3, ~0x34, ~1)|RS1_G0,       "g,[i]o", 0, v9 },
-{ "sta",       F3(3, 0x34, 1), F3(~3, ~0x34, ~1)|SIMM13(~0),   "g,[1]o", 0, v9 }, /* st d,[rs1+0] */
-
-{ "stwa",      F3(3, 0x14, 0), F3(~3, ~0x14, ~0),              "d,[1+2]A", F_ALIAS, v9 },
-{ "stwa",      F3(3, 0x14, 0), F3(~3, ~0x14, ~0)|RS2(~0),      "d,[1]A", F_ALIAS, v9 }, /* sta d,[rs1+%g0] */
-{ "stwa",      F3(3, 0x14, 1), F3(~3, ~0x14, ~1),              "d,[1+i]o", F_ALIAS, v9 },
-{ "stwa",      F3(3, 0x14, 1), F3(~3, ~0x14, ~1),              "d,[i+1]o", F_ALIAS, v9 },
-{ "stwa",      F3(3, 0x14, 1), F3(~3, ~0x14, ~1)|RS1_G0,       "d,[i]o", F_ALIAS, v9 },
-{ "stwa",      F3(3, 0x14, 1), F3(~3, ~0x14, ~1)|SIMM13(~0),   "d,[1]o", F_ALIAS, v9 }, /* st d,[rs1+0] */
-
-{ "stswa",     F3(3, 0x14, 0), F3(~3, ~0x14, ~0),              "d,[1+2]A", F_ALIAS, v9 },
-{ "stswa",     F3(3, 0x14, 0), F3(~3, ~0x14, ~0)|RS2(~0),      "d,[1]A", F_ALIAS, v9 }, /* sta d,[rs1+%g0] */
-{ "stswa",     F3(3, 0x14, 1), F3(~3, ~0x14, ~1),              "d,[1+i]o", F_ALIAS, v9 },
-{ "stswa",     F3(3, 0x14, 1), F3(~3, ~0x14, ~1),              "d,[i+1]o", F_ALIAS, v9 },
-{ "stswa",     F3(3, 0x14, 1), F3(~3, ~0x14, ~1)|RS1_G0,       "d,[i]o", F_ALIAS, v9 },
-{ "stswa",     F3(3, 0x14, 1), F3(~3, ~0x14, ~1)|SIMM13(~0),   "d,[1]o", F_ALIAS, v9 }, /* st d,[rs1+0] */
-
-{ "stuwa",     F3(3, 0x14, 0), F3(~3, ~0x14, ~0),              "d,[1+2]A", F_ALIAS, v9 },
-{ "stuwa",     F3(3, 0x14, 0), F3(~3, ~0x14, ~0)|RS2(~0),      "d,[1]A", F_ALIAS, v9 }, /* sta d,[rs1+%g0] */
-{ "stuwa",     F3(3, 0x14, 1), F3(~3, ~0x14, ~1),              "d,[1+i]o", F_ALIAS, v9 },
-{ "stuwa",     F3(3, 0x14, 1), F3(~3, ~0x14, ~1),              "d,[i+1]o", F_ALIAS, v9 },
-{ "stuwa",     F3(3, 0x14, 1), F3(~3, ~0x14, ~1)|RS1_G0,       "d,[i]o", F_ALIAS, v9 },
-{ "stuwa",     F3(3, 0x14, 1), F3(~3, ~0x14, ~1)|SIMM13(~0),   "d,[1]o", F_ALIAS, v9 }, /* st d,[rs1+0] */
-
-{ "stb",       F3(3, 0x05, 0), F3(~3, ~0x05, ~0)|ASI(~0),      "d,[1+2]", 0, v6 },
-{ "stb",       F3(3, 0x05, 0), F3(~3, ~0x05, ~0)|ASI_RS2(~0),  "d,[1]", 0, v6 }, /* stb d,[rs1+%g0] */
-{ "stb",       F3(3, 0x05, 1), F3(~3, ~0x05, ~1),              "d,[1+i]", 0, v6 },
-{ "stb",       F3(3, 0x05, 1), F3(~3, ~0x05, ~1),              "d,[i+1]", 0, v6 },
-{ "stb",       F3(3, 0x05, 1), F3(~3, ~0x05, ~1)|RS1_G0,       "d,[i]", 0, v6 },
-{ "stb",       F3(3, 0x05, 1), F3(~3, ~0x05, ~1)|SIMM13(~0),   "d,[1]", 0, v6 }, /* stb d,[rs1+0] */
-
-{ "stub",      F3(3, 0x05, 0), F3(~3, ~0x05, ~0)|ASI(~0),      "d,[1+2]", F_ALIAS, v9 },
-{ "stub",      F3(3, 0x05, 0), F3(~3, ~0x05, ~0)|ASI_RS2(~0),  "d,[1]", F_ALIAS, v9 }, /* stb d,[rs1+%g0] */
-{ "stub",      F3(3, 0x05, 1), F3(~3, ~0x05, ~1),              "d,[1+i]", F_ALIAS, v9 },
-{ "stub",      F3(3, 0x05, 1), F3(~3, ~0x05, ~1),              "d,[i+1]", F_ALIAS, v9 },
-{ "stub",      F3(3, 0x05, 1), F3(~3, ~0x05, ~1)|RS1_G0,       "d,[i]", F_ALIAS, v9 },
-{ "stub",      F3(3, 0x05, 1), F3(~3, ~0x05, ~1)|SIMM13(~0),   "d,[1]", F_ALIAS, v9 }, /* stb d,[rs1+0] */
-
-{ "stsb",      F3(3, 0x05, 0), F3(~3, ~0x05, ~0)|ASI(~0),      "d,[1+2]", F_ALIAS, v9 },
-{ "stsb",      F3(3, 0x05, 0), F3(~3, ~0x05, ~0)|ASI_RS2(~0),  "d,[1]", F_ALIAS, v9 }, /* stb d,[rs1+%g0] */
-{ "stsb",      F3(3, 0x05, 1), F3(~3, ~0x05, ~1),              "d,[1+i]", F_ALIAS, v9 },
-{ "stsb",      F3(3, 0x05, 1), F3(~3, ~0x05, ~1),              "d,[i+1]", F_ALIAS, v9 },
-{ "stsb",      F3(3, 0x05, 1), F3(~3, ~0x05, ~1)|RS1_G0,       "d,[i]", F_ALIAS, v9 },
-{ "stsb",      F3(3, 0x05, 1), F3(~3, ~0x05, ~1)|SIMM13(~0),   "d,[1]", F_ALIAS, v9 }, /* stb d,[rs1+0] */
-
-{ "stba",      F3(3, 0x15, 0), F3(~3, ~0x15, ~0),              "d,[1+2]A", 0, v6 },
-{ "stba",      F3(3, 0x15, 0), F3(~3, ~0x15, ~0)|RS2(~0),      "d,[1]A", 0, v6 }, /* stba d,[rs1+%g0] */
-{ "stba",      F3(3, 0x15, 1), F3(~3, ~0x15, ~1),              "d,[1+i]o", 0, v9 },
-{ "stba",      F3(3, 0x15, 1), F3(~3, ~0x15, ~1),              "d,[i+1]o", 0, v9 },
-{ "stba",      F3(3, 0x15, 1), F3(~3, ~0x15, ~1)|RS1_G0,       "d,[i]o", 0, v9 },
-{ "stba",      F3(3, 0x15, 1), F3(~3, ~0x15, ~1)|SIMM13(~0),   "d,[1]o", 0, v9 }, /* stb d,[rs1+0] */
-
-{ "stsba",     F3(3, 0x15, 0), F3(~3, ~0x15, ~0),              "d,[1+2]A", F_ALIAS, v9 },
-{ "stsba",     F3(3, 0x15, 0), F3(~3, ~0x15, ~0)|RS2(~0),      "d,[1]A", F_ALIAS, v9 }, /* stba d,[rs1+%g0] */
-{ "stsba",     F3(3, 0x15, 1), F3(~3, ~0x15, ~1),              "d,[1+i]o", F_ALIAS, v9 },
-{ "stsba",     F3(3, 0x15, 1), F3(~3, ~0x15, ~1),              "d,[i+1]o", F_ALIAS, v9 },
-{ "stsba",     F3(3, 0x15, 1), F3(~3, ~0x15, ~1)|RS1_G0,       "d,[i]o", F_ALIAS, v9 },
-{ "stsba",     F3(3, 0x15, 1), F3(~3, ~0x15, ~1)|SIMM13(~0),   "d,[1]o", F_ALIAS, v9 }, /* stb d,[rs1+0] */
-
-{ "stuba",     F3(3, 0x15, 0), F3(~3, ~0x15, ~0),              "d,[1+2]A", F_ALIAS, v9 },
-{ "stuba",     F3(3, 0x15, 0), F3(~3, ~0x15, ~0)|RS2(~0),      "d,[1]A", F_ALIAS, v9 }, /* stba d,[rs1+%g0] */
-{ "stuba",     F3(3, 0x15, 1), F3(~3, ~0x15, ~1),              "d,[1+i]o", F_ALIAS, v9 },
-{ "stuba",     F3(3, 0x15, 1), F3(~3, ~0x15, ~1),              "d,[i+1]o", F_ALIAS, v9 },
-{ "stuba",     F3(3, 0x15, 1), F3(~3, ~0x15, ~1)|RS1_G0,       "d,[i]o", F_ALIAS, v9 },
-{ "stuba",     F3(3, 0x15, 1), F3(~3, ~0x15, ~1)|SIMM13(~0),   "d,[1]o", F_ALIAS, v9 }, /* stb d,[rs1+0] */
-
-{ "std",       F3(3, 0x07, 0), F3(~3, ~0x07, ~0)|ASI(~0),      "d,[1+2]", 0, v6 },
-{ "std",       F3(3, 0x07, 0), F3(~3, ~0x07, ~0)|ASI_RS2(~0),  "d,[1]", 0, v6 }, /* std d,[rs1+%g0] */
-{ "std",       F3(3, 0x07, 1), F3(~3, ~0x07, ~1),              "d,[1+i]", 0, v6 },
-{ "std",       F3(3, 0x07, 1), F3(~3, ~0x07, ~1),              "d,[i+1]", 0, v6 },
-{ "std",       F3(3, 0x07, 1), F3(~3, ~0x07, ~1)|RS1_G0,       "d,[i]", 0, v6 },
-{ "std",       F3(3, 0x07, 1), F3(~3, ~0x07, ~1)|SIMM13(~0),   "d,[1]", 0, v6 }, /* std d,[rs1+0] */
-/* FIXME These are marked F_ALIAS, so that they won't conflict with new v9
-   insns when v9 is present.  Otherwise, the F_ALIAS flag is ignored.  */
-{ "std",       F3(3, 0x26, 0), F3(~3, ~0x26, ~0)|ASI(~0),      "q,[1+2]", F_ALIAS, v6 },
-{ "std",       F3(3, 0x26, 0), F3(~3, ~0x26, ~0)|ASI_RS2(~0),  "q,[1]", F_ALIAS, v6 }, /* std d,[rs1+%g0] */
-{ "std",       F3(3, 0x26, 1), F3(~3, ~0x26, ~1),              "q,[1+i]", F_ALIAS, v6 },
-{ "std",       F3(3, 0x26, 1), F3(~3, ~0x26, ~1),              "q,[i+1]", F_ALIAS, v6 },
-{ "std",       F3(3, 0x26, 1), F3(~3, ~0x26, ~1)|RS1_G0,       "q,[i]", F_ALIAS, v6 },
-{ "std",       F3(3, 0x26, 1), F3(~3, ~0x26, ~1)|SIMM13(~0),   "q,[1]", F_ALIAS, v6 }, /* std d,[rs1+0] */
-{ "std",       F3(3, 0x27, 0), F3(~3, ~0x27, ~0)|ASI(~0),      "H,[1+2]", 0, v6 },
-{ "std",       F3(3, 0x27, 0), F3(~3, ~0x27, ~0)|ASI_RS2(~0),  "H,[1]", 0, v6 }, /* std d,[rs1+%g0] */
-{ "std",       F3(3, 0x27, 1), F3(~3, ~0x27, ~1),              "H,[1+i]", 0, v6 },
-{ "std",       F3(3, 0x27, 1), F3(~3, ~0x27, ~1),              "H,[i+1]", 0, v6 },
-{ "std",       F3(3, 0x27, 1), F3(~3, ~0x27, ~1)|RS1_G0,       "H,[i]", 0, v6 },
-{ "std",       F3(3, 0x27, 1), F3(~3, ~0x27, ~1)|SIMM13(~0),   "H,[1]", 0, v6 }, /* std d,[rs1+0] */
-/* FIXME These are marked F_ALIAS, so that they won't conflict with new v9
-   insns when v9 is present.  Otherwise, the F_ALIAS flag is ignored.  */
-{ "std",       F3(3, 0x36, 0), F3(~3, ~0x36, ~0)|ASI(~0),      "Q,[1+2]", F_ALIAS, v6 },
-{ "std",       F3(3, 0x36, 0), F3(~3, ~0x36, ~0)|ASI_RS2(~0),  "Q,[1]", F_ALIAS, v6 }, /* std d,[rs1+%g0] */
-{ "std",       F3(3, 0x36, 1), F3(~3, ~0x36, ~1),              "Q,[1+i]", F_ALIAS, v6 },
-{ "std",       F3(3, 0x36, 1), F3(~3, ~0x36, ~1),              "Q,[i+1]", F_ALIAS, v6 },
-{ "std",       F3(3, 0x36, 1), F3(~3, ~0x36, ~1)|RS1_G0,       "Q,[i]", F_ALIAS, v6 },
-{ "std",       F3(3, 0x36, 1), F3(~3, ~0x36, ~1)|SIMM13(~0),   "Q,[1]", F_ALIAS, v6 }, /* std d,[rs1+0] */
-/* FIXME These are marked F_ALIAS, so that they won't conflict with new v9
-   insns when v9 is present.  Otherwise, the F_ALIAS flag is ignored.  */
-{ "std",       F3(3, 0x37, 0), F3(~3, ~0x37, ~0)|ASI(~0),      "D,[1+2]", F_ALIAS, v6 },
-{ "std",       F3(3, 0x37, 0), F3(~3, ~0x37, ~0)|ASI_RS2(~0),  "D,[1]", F_ALIAS, v6 }, /* std d,[rs1+%g0] */
-{ "std",       F3(3, 0x37, 1), F3(~3, ~0x37, ~1),              "D,[1+i]", F_ALIAS, v6 },
-{ "std",       F3(3, 0x37, 1), F3(~3, ~0x37, ~1),              "D,[i+1]", F_ALIAS, v6 },
-{ "std",       F3(3, 0x37, 1), F3(~3, ~0x37, ~1)|RS1_G0,       "D,[i]", F_ALIAS, v6 },
-{ "std",       F3(3, 0x37, 1), F3(~3, ~0x37, ~1)|SIMM13(~0),   "D,[1]", F_ALIAS, v6 }, /* std d,[rs1+0] */
-
-{ "stda",      F3(3, 0x17, 0), F3(~3, ~0x17, ~0),              "d,[1+2]A", 0, v6 },
-{ "stda",      F3(3, 0x17, 0), F3(~3, ~0x17, ~0)|RS2(~0),      "d,[1]A", 0, v6 }, /* stda d,[rs1+%g0] */
-{ "stda",      F3(3, 0x17, 1), F3(~3, ~0x17, ~1),              "d,[1+i]o", 0, v9 },
-{ "stda",      F3(3, 0x17, 1), F3(~3, ~0x17, ~1),              "d,[i+1]o", 0, v9 },
-{ "stda",      F3(3, 0x17, 1), F3(~3, ~0x17, ~1)|RS1_G0,       "d,[i]o", 0, v9 },
-{ "stda",      F3(3, 0x17, 1), F3(~3, ~0x17, ~1)|SIMM13(~0),   "d,[1]o", 0, v9 }, /* std d,[rs1+0] */
-{ "stda",      F3(3, 0x37, 0), F3(~3, ~0x37, ~0),              "H,[1+2]A", 0, v9 },
-{ "stda",      F3(3, 0x37, 0), F3(~3, ~0x37, ~0)|RS2(~0),      "H,[1]A", 0, v9 }, /* stda d,[rs1+%g0] */
-{ "stda",      F3(3, 0x37, 1), F3(~3, ~0x37, ~1),              "H,[1+i]o", 0, v9 },
-{ "stda",      F3(3, 0x37, 1), F3(~3, ~0x37, ~1),              "H,[i+1]o", 0, v9 },
-{ "stda",      F3(3, 0x37, 1), F3(~3, ~0x37, ~1)|RS1_G0,       "H,[i]o", 0, v9 },
-{ "stda",      F3(3, 0x37, 1), F3(~3, ~0x37, ~1)|SIMM13(~0),   "H,[1]o", 0, v9 }, /* std d,[rs1+0] */
-
-{ "sth",       F3(3, 0x06, 0), F3(~3, ~0x06, ~0)|ASI(~0),      "d,[1+2]", 0, v6 },
-{ "sth",       F3(3, 0x06, 0), F3(~3, ~0x06, ~0)|ASI_RS2(~0),  "d,[1]", 0, v6 }, /* sth d,[rs1+%g0] */
-{ "sth",       F3(3, 0x06, 1), F3(~3, ~0x06, ~1),              "d,[1+i]", 0, v6 },
-{ "sth",       F3(3, 0x06, 1), F3(~3, ~0x06, ~1),              "d,[i+1]", 0, v6 },
-{ "sth",       F3(3, 0x06, 1), F3(~3, ~0x06, ~1)|RS1_G0,       "d,[i]", 0, v6 },
-{ "sth",       F3(3, 0x06, 1), F3(~3, ~0x06, ~1)|SIMM13(~0),   "d,[1]", 0, v6 }, /* sth d,[+] */
-
-{ "stsh",      F3(3, 0x06, 0), F3(~3, ~0x06, ~0)|ASI(~0),      "d,[1+2]", F_ALIAS, v9 },
-{ "stsh",      F3(3, 0x06, 0), F3(~3, ~0x06, ~0)|ASI_RS2(~0),  "d,[1]", F_ALIAS, v9 }, /* sth d,[rs1+%g0] */
-{ "stsh",      F3(3, 0x06, 1), F3(~3, ~0x06, ~1),              "d,[1+i]", F_ALIAS, v9 },
-{ "stsh",      F3(3, 0x06, 1), F3(~3, ~0x06, ~1),              "d,[i+1]", F_ALIAS, v9 },
-{ "stsh",      F3(3, 0x06, 1), F3(~3, ~0x06, ~1)|RS1_G0,       "d,[i]", F_ALIAS, v9 },
-{ "stsh",      F3(3, 0x06, 1), F3(~3, ~0x06, ~1)|SIMM13(~0),   "d,[1]", F_ALIAS, v9 }, /* sth d,[rs1+0] */
-
-{ "stuh",      F3(3, 0x06, 0), F3(~3, ~0x06, ~0)|ASI(~0),      "d,[1+2]", F_ALIAS, v9 },
-{ "stuh",      F3(3, 0x06, 0), F3(~3, ~0x06, ~0)|ASI_RS2(~0),  "d,[1]", F_ALIAS, v9 }, /* sth d,[rs1+%g0] */
-{ "stuh",      F3(3, 0x06, 1), F3(~3, ~0x06, ~1),              "d,[1+i]", F_ALIAS, v9 },
-{ "stuh",      F3(3, 0x06, 1), F3(~3, ~0x06, ~1),              "d,[i+1]", F_ALIAS, v9 },
-{ "stuh",      F3(3, 0x06, 1), F3(~3, ~0x06, ~1)|RS1_G0,       "d,[i]", F_ALIAS, v9 },
-{ "stuh",      F3(3, 0x06, 1), F3(~3, ~0x06, ~1)|SIMM13(~0),   "d,[1]", F_ALIAS, v9 }, /* sth d,[rs1+0] */
-
-{ "stha",      F3(3, 0x16, 0), F3(~3, ~0x16, ~0),              "d,[1+2]A", 0, v6 },
-{ "stha",      F3(3, 0x16, 0), F3(~3, ~0x16, ~0)|RS2(~0),      "d,[1]A", 0, v6 }, /* stha ,[+%] */
-{ "stha",      F3(3, 0x16, 1), F3(~3, ~0x16, ~1),              "d,[1+i]o", 0, v9 },
-{ "stha",      F3(3, 0x16, 1), F3(~3, ~0x16, ~1),              "d,[i+1]o", 0, v9 },
-{ "stha",      F3(3, 0x16, 1), F3(~3, ~0x16, ~1)|RS1_G0,       "d,[i]o", 0, v9 },
-{ "stha",      F3(3, 0x16, 1), F3(~3, ~0x16, ~1)|SIMM13(~0),   "d,[1]o", 0, v9 }, /* sth d,[+] */
-
-{ "stsha",     F3(3, 0x16, 0), F3(~3, ~0x16, ~0),              "d,[1+2]A", F_ALIAS, v9 },
-{ "stsha",     F3(3, 0x16, 0), F3(~3, ~0x16, ~0)|RS2(~0),      "d,[1]A", F_ALIAS, v9 }, /* stha d,[rs1+%g0] */
-{ "stsha",     F3(3, 0x16, 1), F3(~3, ~0x16, ~1),              "d,[1+i]o", F_ALIAS, v9 },
-{ "stsha",     F3(3, 0x16, 1), F3(~3, ~0x16, ~1),              "d,[i+1]o", F_ALIAS, v9 },
-{ "stsha",     F3(3, 0x16, 1), F3(~3, ~0x16, ~1)|RS1_G0,       "d,[i]o", F_ALIAS, v9 },
-{ "stsha",     F3(3, 0x16, 1), F3(~3, ~0x16, ~1)|SIMM13(~0),   "d,[1]o", F_ALIAS, v9 }, /* sth d,[+] */
-
-{ "stuha",     F3(3, 0x16, 0), F3(~3, ~0x16, ~0),              "d,[1+2]A", F_ALIAS, v9 },
-{ "stuha",     F3(3, 0x16, 0), F3(~3, ~0x16, ~0)|RS2(~0),      "d,[1]A", F_ALIAS, v9 }, /* stha d,[rs1+%g0] */
-{ "stuha",     F3(3, 0x16, 1), F3(~3, ~0x16, ~1),              "d,[1+i]o", F_ALIAS, v9 },
-{ "stuha",     F3(3, 0x16, 1), F3(~3, ~0x16, ~1),              "d,[i+1]o", F_ALIAS, v9 },
-{ "stuha",     F3(3, 0x16, 1), F3(~3, ~0x16, ~1)|RS1_G0,       "d,[i]o", F_ALIAS, v9 },
-{ "stuha",     F3(3, 0x16, 1), F3(~3, ~0x16, ~1)|SIMM13(~0),   "d,[1]o", F_ALIAS, v9 }, /* sth d,[+] */
-
-{ "stx",       F3(3, 0x0e, 0), F3(~3, ~0x0e, ~0)|ASI(~0),      "d,[1+2]", 0, v9 },
-{ "stx",       F3(3, 0x0e, 0), F3(~3, ~0x0e, ~0)|ASI_RS2(~0),  "d,[1]", 0, v9 }, /* stx d,[rs1+%g0] */
-{ "stx",       F3(3, 0x0e, 1), F3(~3, ~0x0e, ~1),              "d,[1+i]", 0, v9 },
-{ "stx",       F3(3, 0x0e, 1), F3(~3, ~0x0e, ~1),              "d,[i+1]", 0, v9 },
-{ "stx",       F3(3, 0x0e, 1), F3(~3, ~0x0e, ~1)|RS1_G0,       "d,[i]", 0, v9 },
-{ "stx",       F3(3, 0x0e, 1), F3(~3, ~0x0e, ~1)|SIMM13(~0),   "d,[1]", 0, v9 }, /* stx d,[rs1+0] */
-
-{ "stx",       F3(3, 0x25, 0)|RD(1), F3(~3, ~0x25, ~0)|ASI(~0)|RD(~1), "F,[1+2]", 0, v9 },
-{ "stx",       F3(3, 0x25, 0)|RD(1), F3(~3, ~0x25, ~0)|ASI_RS2(~0)|RD(~1),"F,[1]", 0, v9 }, /* st d,[rs1+%g0] */
-{ "stx",       F3(3, 0x25, 1)|RD(1), F3(~3, ~0x25, ~1)|RD(~1),         "F,[1+i]", 0, v9 },
-{ "stx",       F3(3, 0x25, 1)|RD(1), F3(~3, ~0x25, ~1)|RD(~1),         "F,[i+1]", 0, v9 },
-{ "stx",       F3(3, 0x25, 1)|RD(1), F3(~3, ~0x25, ~1)|RS1_G0|RD(~1),  "F,[i]", 0, v9 },
-{ "stx",       F3(3, 0x25, 1)|RD(1), F3(~3, ~0x25, ~1)|SIMM13(~0)|RD(~1),"F,[1]", 0, v9 }, /* st d,[rs1+0] */
-
-{ "stxa",      F3(3, 0x1e, 0), F3(~3, ~0x1e, ~0),              "d,[1+2]A", 0, v9 },
-{ "stxa",      F3(3, 0x1e, 0), F3(~3, ~0x1e, ~0)|RS2(~0),      "d,[1]A", 0, v9 }, /* stha d,[rs1+%g0] */
-{ "stxa",      F3(3, 0x1e, 1), F3(~3, ~0x1e, ~1),              "d,[1+i]o", 0, v9 },
-{ "stxa",      F3(3, 0x1e, 1), F3(~3, ~0x1e, ~1),              "d,[i+1]o", 0, v9 },
-{ "stxa",      F3(3, 0x1e, 1), F3(~3, ~0x1e, ~1)|RS1_G0,       "d,[i]o", 0, v9 },
-{ "stxa",      F3(3, 0x1e, 1), F3(~3, ~0x1e, ~1)|SIMM13(~0),   "d,[1]o", 0, v9 }, /* stx d,[rs1+0] */
-
-{ "stq",       F3(3, 0x26, 0), F3(~3, ~0x26, ~0)|ASI(~0),      "J,[1+2]", 0, v9 },
-{ "stq",       F3(3, 0x26, 0), F3(~3, ~0x26, ~0)|ASI_RS2(~0),  "J,[1]", 0, v9 }, /* st d[rs1+%g0] */
-{ "stq",       F3(3, 0x26, 1), F3(~3, ~0x26, ~1),              "J,[1+i]", 0, v9 },
-{ "stq",       F3(3, 0x26, 1), F3(~3, ~0x26, ~1),              "J,[i+1]", 0, v9 },
-{ "stq",       F3(3, 0x26, 1), F3(~3, ~0x26, ~1)|RS1_G0,       "J,[i]", 0, v9 },
-{ "stq",       F3(3, 0x26, 1), F3(~3, ~0x26, ~1)|SIMM13(~0),   "J,[1]", 0, v9 }, /* st d,[rs1+0] */
-
-{ "stqa",      F3(3, 0x36, 0), F3(~3, ~0x36, ~0)|ASI(~0),      "J,[1+2]A", 0, v9 },
-{ "stqa",      F3(3, 0x36, 0), F3(~3, ~0x36, ~0)|ASI_RS2(~0),  "J,[1]A", 0, v9 }, /* st d[rs1+%g0] */
-{ "stqa",      F3(3, 0x36, 1), F3(~3, ~0x36, ~1),              "J,[1+i]o", 0, v9 },
-{ "stqa",      F3(3, 0x36, 1), F3(~3, ~0x36, ~1),              "J,[i+1]o", 0, v9 },
-{ "stqa",      F3(3, 0x36, 1), F3(~3, ~0x36, ~1)|RS1_G0,       "J,[i]o", 0, v9 },
-{ "stqa",      F3(3, 0x36, 1), F3(~3, ~0x36, ~1)|SIMM13(~0),   "J,[1]o", 0, v9 }, /* st d,[rs1+0] */
-
-{ "swap",      F3(3, 0x0f, 0), F3(~3, ~0x0f, ~0)|ASI(~0),      "[1+2],d", 0, v7 },
-{ "swap",      F3(3, 0x0f, 0), F3(~3, ~0x0f, ~0)|ASI_RS2(~0),  "[1],d", 0, v7 }, /* swap [rs1+%g0],d */
-{ "swap",      F3(3, 0x0f, 1), F3(~3, ~0x0f, ~1),              "[1+i],d", 0, v7 },
-{ "swap",      F3(3, 0x0f, 1), F3(~3, ~0x0f, ~1),              "[i+1],d", 0, v7 },
-{ "swap",      F3(3, 0x0f, 1), F3(~3, ~0x0f, ~1)|RS1_G0,       "[i],d", 0, v7 },
-{ "swap",      F3(3, 0x0f, 1), F3(~3, ~0x0f, ~1)|SIMM13(~0),   "[1],d", 0, v7 }, /* swap [rs1+0],d */
-
-{ "swapa",     F3(3, 0x1f, 0), F3(~3, ~0x1f, ~0),              "[1+2]A,d", 0, v7 },
-{ "swapa",     F3(3, 0x1f, 0), F3(~3, ~0x1f, ~0)|RS2(~0),      "[1]A,d", 0, v7 }, /* swapa [rs1+%g0],d */
-{ "swapa",     F3(3, 0x1f, 1), F3(~3, ~0x1f, ~1),              "[1+i]o,d", 0, v9 },
-{ "swapa",     F3(3, 0x1f, 1), F3(~3, ~0x1f, ~1),              "[i+1]o,d", 0, v9 },
-{ "swapa",     F3(3, 0x1f, 1), F3(~3, ~0x1f, ~1)|RS1_G0,       "[i]o,d", 0, v9 },
-{ "swapa",     F3(3, 0x1f, 1), F3(~3, ~0x1f, ~1)|SIMM13(~0),   "[1]o,d", 0, v9 }, /* swap [rs1+0],d */
-
-{ "restore",   F3(2, 0x3d, 0), F3(~2, ~0x3d, ~0)|ASI(~0),                      "1,2,d", 0, v6 },
-{ "restore",   F3(2, 0x3d, 0), F3(~2, ~0x3d, ~0)|RD_G0|RS1_G0|ASI_RS2(~0),     "", 0, v6 }, /* restore %g0,%g0,%g0 */
-{ "restore",   F3(2, 0x3d, 1), F3(~2, ~0x3d, ~1),                              "1,i,d", 0, v6 },
-{ "restore",   F3(2, 0x3d, 1), F3(~2, ~0x3d, ~1)|RD_G0|RS1_G0|SIMM13(~0),      "", 0, v6 }, /* restore %g0,0,%g0 */
-
-{ "rett",      F3(2, 0x39, 0), F3(~2, ~0x39, ~0)|RD_G0|ASI(~0),        "1+2", F_DELAYED, v6 }, /* rett rs1+rs2 */
-{ "rett",      F3(2, 0x39, 0), F3(~2, ~0x39, ~0)|RD_G0|ASI_RS2(~0),    "1", F_DELAYED, v6 },   /* rett rs1,%g0 */
-{ "rett",      F3(2, 0x39, 1), F3(~2, ~0x39, ~1)|RD_G0,        "1+i", F_DELAYED, v6 }, /* rett rs1+X */
-{ "rett",      F3(2, 0x39, 1), F3(~2, ~0x39, ~1)|RD_G0,        "i+1", F_DELAYED, v6 }, /* rett X+rs1 */
-{ "rett",      F3(2, 0x39, 1), F3(~2, ~0x39, ~1)|RD_G0|RS1_G0,"i", F_DELAYED, v6 }, /* rett X+rs1 */
-{ "rett",      F3(2, 0x39, 1), F3(~2, ~0x39, ~1)|RD_G0|RS1_G0, "i", F_DELAYED, v6 },   /* rett X */
-{ "rett",      F3(2, 0x39, 1), F3(~2, ~0x39, ~1)|RD_G0|SIMM13(~0),     "1", F_DELAYED, v6 },   /* rett rs1+0 */
-
-{ "save",      F3(2, 0x3c, 0), F3(~2, ~0x3c, ~0)|ASI(~0),      "1,2,d", 0, v6 },
-{ "save",      F3(2, 0x3c, 1), F3(~2, ~0x3c, ~1),              "1,i,d", 0, v6 },
-{ "save",      0x81e00000,     ~0x81e00000,    "", F_ALIAS, v6 },
-
-{ "ret",  F3(2, 0x38, 1)|RS1(0x1f)|SIMM13(8), F3(~2, ~0x38, ~1)|SIMM13(~8),           "", F_DELAYED, v6 }, /* jmpl %i7+8,%g0 */
-{ "retl", F3(2, 0x38, 1)|RS1(0x0f)|SIMM13(8), F3(~2, ~0x38, ~1)|RS1(~0x0f)|SIMM13(~8), "", F_DELAYED, v6 }, /* jmpl %o7+8,%g0 */
-
-{ "jmpl",      F3(2, 0x38, 0), F3(~2, ~0x38, ~0)|ASI(~0),      "1+2,d", F_DELAYED, v6 },
-{ "jmpl",      F3(2, 0x38, 0), F3(~2, ~0x38, ~0)|ASI_RS2(~0),  "1,d", F_DELAYED, v6 }, /* jmpl rs1+%g0,d */
-{ "jmpl",      F3(2, 0x38, 1), F3(~2, ~0x38, ~1)|SIMM13(~0),   "1,d", F_DELAYED, v6 }, /* jmpl rs1+0,d */
-{ "jmpl",      F3(2, 0x38, 1), F3(~2, ~0x38, ~1)|RS1_G0,       "i,d", F_DELAYED, v6 }, /* jmpl %g0+i,d */
-{ "jmpl",      F3(2, 0x38, 1), F3(~2, ~0x38, ~1),              "1+i,d", F_DELAYED, v6 },
-{ "jmpl",      F3(2, 0x38, 1), F3(~2, ~0x38, ~1),              "i+1,d", F_DELAYED, v6 },
-
-{ "done",      F3(2, 0x3e, 1)|RD(0), F3(~2, ~0x3e, ~1)|RD(~0)|RS1_G0|SIMM13(~0),       "", 0, v9 },
-{ "retry",     F3(2, 0x3e, 1)|RD(1), F3(~2, ~0x3e, ~1)|RD(~1)|RS1_G0|SIMM13(~0),       "", 0, v9 },
-{ "saved",     F3(2, 0x31, 1)|RD(0), F3(~2, ~0x31, ~1)|RD(~0)|RS1_G0|SIMM13(~0),       "", 0, v9 },
-{ "restored",  F3(2, 0x31, 1)|RD(1), F3(~2, ~0x31, ~1)|RD(~1)|RS1_G0|SIMM13(~0),       "", 0, v9 },
-{ "sigm",      F3(2, 0x30, 0)|RD(0xf), F3(~2, ~0x30, ~0)|RD(~0xf)|RS1_G0|SIMM13(~0),   "", 0, v9 },
-
-{ "flush",     F3(2, 0x3b, 0), F3(~2, ~0x3b, ~0)|ASI(~0),      "1+2", 0, v8 },
-{ "flush",     F3(2, 0x3b, 0), F3(~2, ~0x3b, ~0)|ASI_RS2(~0),  "1", 0, v8 }, /* flush rs1+%g0 */
-{ "flush",     F3(2, 0x3b, 1), F3(~2, ~0x3b, ~1)|SIMM13(~0),   "1", 0, v8 }, /* flush rs1+0 */
-{ "flush",     F3(2, 0x3b, 1), F3(~2, ~0x3b, ~1)|RS1_G0,       "i", 0, v8 }, /* flush %g0+i */
-{ "flush",     F3(2, 0x3b, 1), F3(~2, ~0x3b, ~1),              "1+i", 0, v8 },
-{ "flush",     F3(2, 0x3b, 1), F3(~2, ~0x3b, ~1),              "i+1", 0, v8 },
-
-/* IFLUSH was renamed to FLUSH in v8.  */
-{ "iflush",    F3(2, 0x3b, 0), F3(~2, ~0x3b, ~0)|ASI(~0),      "1+2", F_ALIAS, v6 },
-{ "iflush",    F3(2, 0x3b, 0), F3(~2, ~0x3b, ~0)|ASI_RS2(~0),  "1", F_ALIAS, v6 }, /* flush rs1+%g0 */
-{ "iflush",    F3(2, 0x3b, 1), F3(~2, ~0x3b, ~1)|SIMM13(~0),   "1", F_ALIAS, v6 }, /* flush rs1+0 */
-{ "iflush",    F3(2, 0x3b, 1), F3(~2, ~0x3b, ~1)|RS1_G0,       "i", F_ALIAS, v6 },
-{ "iflush",    F3(2, 0x3b, 1), F3(~2, ~0x3b, ~1),              "1+i", F_ALIAS, v6 },
-{ "iflush",    F3(2, 0x3b, 1), F3(~2, ~0x3b, ~1),              "i+1", F_ALIAS, v6 },
-
-{ "return",    F3(2, 0x39, 0), F3(~2, ~0x39, ~0)|ASI(~0),      "1+2", 0, v9 },
-{ "return",    F3(2, 0x39, 0), F3(~2, ~0x39, ~0)|ASI_RS2(~0),  "1", 0, v9 }, /* return rs1+%g0 */
-{ "return",    F3(2, 0x39, 1), F3(~2, ~0x39, ~1)|SIMM13(~0),   "1", 0, v9 }, /* return rs1+0 */
-{ "return",    F3(2, 0x39, 1), F3(~2, ~0x39, ~1)|RS1_G0,       "i", 0, v9 }, /* return %g0+i */
-{ "return",    F3(2, 0x39, 1), F3(~2, ~0x39, ~1),              "1+i", 0, v9 },
-{ "return",    F3(2, 0x39, 1), F3(~2, ~0x39, ~1),              "i+1", 0, v9 },
-
-{ "flushw",    F3(2, 0x2b, 0), F3(~2, ~0x2b, ~0)|RD_G0|RS1_G0|ASI_RS2(~0),     "", 0, v9 },
-
-{ "membar",    F3(2, 0x28, 1)|RS1(0xf), F3(~2, ~0x28, ~1)|RD_G0|RS1(~0xf)|ASI(~0), "K", 0, v9 },
-{ "stbar",     F3(2, 0x28, 0)|RS1(0xf), F3(~2, ~0x28, ~0)|RD_G0|RS1(~0xf)|SIMM13(~0),  "", 0, v8 },
-
-{ "prefetch",  F3(3, 0x2d, 0), F3(~3, ~0x2d, ~0),              "[1+2],*", 0, v9 },
-{ "prefetch",  F3(3, 0x2d, 0), F3(~3, ~0x2d, ~0)|RS2_G0,       "[1],*", 0, v9 }, /* prefetch [rs1+%g0],prefetch_fcn */
-{ "prefetch",  F3(3, 0x2d, 1), F3(~3, ~0x2d, ~1),              "[1+i],*", 0, v9 },
-{ "prefetch",  F3(3, 0x2d, 1), F3(~3, ~0x2d, ~1),              "[i+1],*", 0, v9 },
-{ "prefetch",  F3(3, 0x2d, 1), F3(~3, ~0x2d, ~1)|RS1_G0,       "[i],*", 0, v9 },
-{ "prefetch",  F3(3, 0x2d, 1), F3(~3, ~0x2d, ~1)|SIMM13(~0),   "[1],*", 0, v9 }, /* prefetch [rs1+0],prefetch_fcn */
-{ "prefetcha", F3(3, 0x3d, 0), F3(~3, ~0x3d, ~0),              "[1+2]A,*", 0, v9 },
-{ "prefetcha", F3(3, 0x3d, 0), F3(~3, ~0x3d, ~0)|RS2_G0,       "[1]A,*", 0, v9 }, /* prefetcha [rs1+%g0],prefetch_fcn */
-{ "prefetcha", F3(3, 0x3d, 1), F3(~3, ~0x3d, ~1),              "[1+i]o,d", 0, v9 },
-{ "prefetcha", F3(3, 0x3d, 1), F3(~3, ~0x3d, ~1),              "[i+1]o,d", 0, v9 },
-{ "prefetcha", F3(3, 0x3d, 1), F3(~3, ~0x3d, ~1)|RS1_G0,       "[i]o,d", 0, v9 },
-{ "prefetcha", F3(3, 0x3d, 1), F3(~3, ~0x3d, ~1)|SIMM13(~0),   "[1]o,d", 0, v9 }, /* prefetcha [rs1+0],d */
-
- /* The 1<<12 is a long story.  It is necessary.  For more info, please contact rich@cygnus.com */
-{ "sll",       F3(2, 0x25, 0), F3(~2, ~0x25, ~0)|(1<<12)|ASI(~0),      "1,2,d", 0, v6 },
-{ "sll",       F3(2, 0x25, 1), F3(~2, ~0x25, ~1)|(1<<12),              "1,i,d", 0, v6 },
-{ "sra",       F3(2, 0x27, 0), F3(~2, ~0x27, ~0)|(1<<12)|ASI(~0),      "1,2,d", 0, v6 },
-{ "sra",       F3(2, 0x27, 1), F3(~2, ~0x27, ~1)|(1<<12),              "1,i,d", 0, v6 },
-{ "srl",       F3(2, 0x26, 0), F3(~2, ~0x26, ~0)|(1<<12)|ASI(~0),      "1,2,d", 0, v6 },
-{ "srl",       F3(2, 0x26, 1), F3(~2, ~0x26, ~1)|(1<<12),              "1,i,d", 0, v6 },
-
-{ "sllx",      F3(2, 0x25, 0)|(1<<12), F3(~2, ~0x25, ~0)|(ASI(~0)^(1<<12)),    "1,2,d", 0, v9 },
-{ "sllx",      F3(2, 0x25, 1)|(1<<12), F3(~2, ~0x25, ~1),              "1,i,d", 0, v9 },
-{ "srax",      F3(2, 0x27, 0)|(1<<12), F3(~2, ~0x27, ~0)|(ASI(~0)^(1<<12)),    "1,2,d", 0, v9 },
-{ "srax",      F3(2, 0x27, 1)|(1<<12), F3(~2, ~0x27, ~1),              "1,i,d", 0, v9 },
-{ "srlx",      F3(2, 0x26, 0)|(1<<12), F3(~2, ~0x26, ~0)|(ASI(~0)^(1<<12)),    "1,2,d", 0, v9 },
-{ "srlx",      F3(2, 0x26, 1)|(1<<12), F3(~2, ~0x26, ~1),              "1,i,d", 0, v9 },
-
-{ "mulscc",    F3(2, 0x24, 0), F3(~2, ~0x24, ~0)|ASI(~0),      "1,2,d", 0, v6 },
-{ "mulscc",    F3(2, 0x24, 1), F3(~2, ~0x24, ~1),              "1,i,d", 0, v6 },
-
-{ "divscc",    F3(2, 0x1d, 0), F3(~2, ~0x1d, ~0)|ASI(~0),      "1,2,d", 0, sparclite },
-{ "divscc",    F3(2, 0x1d, 1), F3(~2, ~0x1d, ~1),              "1,i,d", 0, sparclite },
-
-{ "scan",      F3(2, 0x2c, 0), F3(~2, ~0x2c, ~0)|ASI(~0),      "1,2,d", 0, sparclite },
-{ "scan",      F3(2, 0x2c, 1), F3(~2, ~0x2c, ~1),              "1,i,d", 0, sparclite },
-
-{ "popc",      F3(2, 0x2e, 0), F3(~2, ~0x2e, ~0)|RS2_G0|ASI(~0),"2,d", 0, v9 },
-{ "popc",      F3(2, 0x2e, 1), F3(~2, ~0x2e, ~1)|RS2_G0,       "i,d", 0, v9 },
-
-{ "clr",       F3(2, 0x02, 0), F3(~2, ~0x02, ~0)|RD_G0|RS1_G0|ASI_RS2(~0),     "d", F_ALIAS, v6 }, /* or %g0,%g0,d */
-{ "clr",       F3(2, 0x02, 1), F3(~2, ~0x02, ~1)|RS1_G0|SIMM13(~0),            "d", F_ALIAS, v6 }, /* or %g0,0,d       */
-{ "clr",       F3(3, 0x04, 0), F3(~3, ~0x04, ~0)|RD_G0|ASI(~0),                "[1+2]", F_ALIAS, v6 },
-{ "clr",       F3(3, 0x04, 0), F3(~3, ~0x04, ~0)|RD_G0|ASI_RS2(~0),            "[1]", F_ALIAS, v6 }, /* st %g0,[rs1+%g0] */
-{ "clr",       F3(3, 0x04, 1), F3(~3, ~0x04, ~1)|RD_G0,                        "[1+i]", F_ALIAS, v6 },
-{ "clr",       F3(3, 0x04, 1), F3(~3, ~0x04, ~1)|RD_G0,                        "[i+1]", F_ALIAS, v6 },
-{ "clr",       F3(3, 0x04, 1), F3(~3, ~0x04, ~1)|RD_G0|RS1_G0,         "[i]", F_ALIAS, v6 },
-{ "clr",       F3(3, 0x04, 1), F3(~3, ~0x04, ~1)|RD_G0|SIMM13(~0),             "[1]", F_ALIAS, v6 }, /* st %g0,[rs1+0] */
-
-{ "clrb",      F3(3, 0x05, 0), F3(~3, ~0x05, ~0)|RD_G0|ASI(~0),        "[1+2]", F_ALIAS, v6 },
-{ "clrb",      F3(3, 0x05, 0), F3(~3, ~0x05, ~0)|RD_G0|ASI_RS2(~0),    "[1]", F_ALIAS, v6 }, /* stb %g0,[rs1+%g0] */
-{ "clrb",      F3(3, 0x05, 1), F3(~3, ~0x05, ~1)|RD_G0,                "[1+i]", F_ALIAS, v6 },
-{ "clrb",      F3(3, 0x05, 1), F3(~3, ~0x05, ~1)|RD_G0,                "[i+1]", F_ALIAS, v6 },
-{ "clrb",      F3(3, 0x05, 1), F3(~3, ~0x05, ~1)|RD_G0|RS1_G0, "[i]", F_ALIAS, v6 },
-{ "clrb",      F3(3, 0x05, 1), F3(~3, ~0x05, ~1)|RD_G0|SIMM13(~0),     "[1]", F_ALIAS, v6 }, /* clrb [rs1+0],d */
-
-{ "clrh",      F3(3, 0x06, 0), F3(~3, ~0x06, ~0)|RD_G0|ASI(~0),        "[1+2]", F_ALIAS, v6 },
-{ "clrh",      F3(3, 0x06, 0), F3(~3, ~0x06, ~0)|RD_G0|ASI_RS2(~0),    "[1]", F_ALIAS, v6 }, /* sth %g0,[rs1+%g0] */
-{ "clrh",      F3(3, 0x06, 1), F3(~3, ~0x06, ~1)|RD_G0,                "[1+i]", F_ALIAS, v6 },
-{ "clrh",      F3(3, 0x06, 1), F3(~3, ~0x06, ~1)|RD_G0,                "[i+1]", F_ALIAS, v6 },
-{ "clrh",      F3(3, 0x06, 1), F3(~3, ~0x06, ~1)|RD_G0|RS1_G0, "[i]", F_ALIAS, v6 },
-{ "clrh",      F3(3, 0x06, 1), F3(~3, ~0x06, ~1)|RD_G0|SIMM13(~0),     "[1]", F_ALIAS, v6 }, /* clrb [rs1+0],d */
-
-{ "orcc",      F3(2, 0x12, 0), F3(~2, ~0x12, ~0)|ASI(~0),      "1,2,d", 0, v6 },
-{ "orcc",      F3(2, 0x12, 1), F3(~2, ~0x12, ~1),              "1,i,d", 0, v6 },
-{ "orcc",      F3(2, 0x12, 1), F3(~2, ~0x12, ~1),              "i,1,d", 0, v6 },
-
-/* This is not a commutative instruction.  */
-{ "orncc",     F3(2, 0x16, 0), F3(~2, ~0x16, ~0)|ASI(~0),      "1,2,d", 0, v6 },
-{ "orncc",     F3(2, 0x16, 1), F3(~2, ~0x16, ~1),              "1,i,d", 0, v6 },
-
-/* This is not a commutative instruction.  */
-{ "orn",       F3(2, 0x06, 0), F3(~2, ~0x06, ~0)|ASI(~0),      "1,2,d", 0, v6 },
-{ "orn",       F3(2, 0x06, 1), F3(~2, ~0x06, ~1),              "1,i,d", 0, v6 },
-
-{ "tst",       F3(2, 0x12, 0), F3(~2, ~0x12, ~0)|RD_G0|ASI_RS2(~0),    "1", 0, v6 }, /* orcc rs1, %g0, %g0 */
-{ "tst",       F3(2, 0x12, 0), F3(~2, ~0x12, ~0)|RD_G0|RS1_G0|ASI(~0), "2", 0, v6 }, /* orcc %g0, rs2, %g0 */
-{ "tst",       F3(2, 0x12, 1), F3(~2, ~0x12, ~1)|RD_G0|SIMM13(~0),     "1", 0, v6 }, /* orcc rs1, 0, %g0 */
-
-{ "wr",        F3(2, 0x30, 0),         F3(~2, ~0x30, ~0)|ASI(~0),              "1,2,m", 0, v8 }, /* wr r,r,%asrX */
-{ "wr",        F3(2, 0x30, 0),         F3(~2, ~0x30, ~0)|RD_G0|ASI(~0),        "1,2,y", 0, v6 }, /* wr r,r,%y */
-{ "wr",        F3(2, 0x30, 1),         F3(~2, ~0x30, ~1),                      "1,i,m", 0, v8 }, /* wr r,i,%asrX */
-{ "wr",        F3(2, 0x30, 1),         F3(~2, ~0x30, ~1)|RD_G0,                "1,i,y", 0, v6 }, /* wr r,i,%y */
-{ "wr",        F3(2, 0x31, 0),         F3(~2, ~0x31, ~0)|RD_G0|ASI(~0),        "1,2,p", 0, v6 }, /* wr r,r,%psr */
-{ "wr",        F3(2, 0x31, 1),         F3(~2, ~0x31, ~1)|RD_G0,                "1,i,p", 0, v6 }, /* wr r,i,%psr */
-{ "wr",        F3(2, 0x32, 0),         F3(~2, ~0x32, ~0)|RD_G0|ASI(~0),        "1,2,w", 0, v6 }, /* wr r,r,%wim */
-{ "wr",        F3(2, 0x32, 1),         F3(~2, ~0x32, ~1)|RD_G0,                "1,i,w", 0, v6 }, /* wr r,i,%wim */
-{ "wr",        F3(2, 0x33, 0),         F3(~2, ~0x33, ~0)|RD_G0|ASI(~0),        "1,2,t", 0, v6 }, /* wr r,r,%tbr */
-{ "wr",        F3(2, 0x33, 0),         F3(~2, ~0x33, ~0)|RD_G0|ASI(~0),        "1,2,o", 0, v9 }, /* wr r,r,%asi */
-{ "wr",        F3(2, 0x33, 1),         F3(~2, ~0x33, ~1)|RD_G0,                "1,i,t", 0, v6 }, /* wr r,i,%tbr */
-{ "wr",        F3(2, 0x33, 1),         F3(~2, ~0x33, ~1)|RD_G0,                "1,i,o", 0, v9 }, /* wr r,i,%asi */
-
-{ "wr", F3(2, 0x30, 0)|RD(0), F3(~2, ~0x30, ~0)|RD(~0)|ASI(~0), "1,2,y", 0, v9 },
-{ "wr", F3(2, 0x30, 1)|RD(0), F3(~2, ~0x30, ~1)|RD(~0),                "1,i,y", 0, v9 },
-{ "wr", F3(2, 0x30, 0)|RD(2), F3(~2, ~0x30, ~0)|RD(~2)|ASI(~0), "1,2,E", 0, v9 },
-{ "wr", F3(2, 0x30, 1)|RD(2), F3(~2, ~0x30, ~1)|RD(~2),                "1,i,E", 0, v9 },
-{ "wr", F3(2, 0x30, 0)|RD(3), F3(~2, ~0x30, ~0)|RD(~3)|ASI(~0), "1,2,o", 0, v9 },
-{ "wr", F3(2, 0x30, 1)|RD(3), F3(~2, ~0x30, ~1)|RD(~3),                "1,i,o", 0, v9 },
-{ "wr", F3(2, 0x30, 0)|RD(6), F3(~2, ~0x30, ~0)|RD(~6)|ASI(~0), "1,2,s", 0, v9 },
-{ "wr", F3(2, 0x30, 1)|RD(6), F3(~2, ~0x30, ~1)|RD(~6),                "1,i,s", 0, v9 },
-
-{ "rd",        F3(2, 0x28, 0),                 F3(~2, ~0x28, ~0)|SIMM13(~0),           "M,d", 0, v8 }, /* rd %asr1,r */
-{ "rd",        F3(2, 0x28, 0),                 F3(~2, ~0x28, ~0)|RS1_G0|SIMM13(~0),    "y,d", 0, v6 }, /* rd %y,r */
-{ "rd",        F3(2, 0x29, 0),                 F3(~2, ~0x29, ~0)|RS1_G0|SIMM13(~0),    "p,d", 0, v6 }, /* rd %psr,r */
-{ "rd",        F3(2, 0x2a, 0),                 F3(~2, ~0x2a, ~0)|RS1_G0|SIMM13(~0),    "w,d", 0, v6 }, /* rd %wim,r */
-{ "rd",        F3(2, 0x2b, 0),                 F3(~2, ~0x2b, ~0)|RS1_G0|SIMM13(~0),    "t,d", 0, v6 }, /* rd %tbr,r */
-
-{ "rd",        F3(2, 0x28, 0)|RS1(2),          F3(~2, ~0x28, ~0)|RS1(~2)|SIMM13(~0),   "E,d", 0, v9 }, /* rd %ccr,r */
-{ "rd",        F3(2, 0x28, 0)|RS1(3),          F3(~2, ~0x28, ~0)|RS1(~3)|SIMM13(~0),   "o,d", 0, v9 }, /* rd %asi,r */
-{ "rd",        F3(2, 0x28, 0)|RS1(4),          F3(~2, ~0x28, ~0)|RS1(~4)|SIMM13(~0),   "W,d", 0, v9 }, /* rd %tick,r */
-{ "rd",        F3(2, 0x28, 0)|RS1(5),          F3(~2, ~0x28, ~0)|RS1(~5)|SIMM13(~0),   "P,d", 0, v9 }, /* rd %pc,r */
-{ "rd",        F3(2, 0x2b, 0)|RS1(6),          F3(~2, ~0x2b, ~0)|RS1(~6)|SIMM13(~0),   "s,d", 0, v9 }, /* rd %fprs,r */
-
-{ "rdpr",      F3(2, 0x2a, 0),         F3(~2, ~0x2a, ~0)|SIMM13(~0),   "?,d", 0, v9 }, /* rdpr %priv_reg,r */
-{ "wrpr",      F3(2, 0x32, 0),         F3(~2, ~0x32, ~0)|SIMM13(~0),   "1,2,!", 0, v9 },
-{ "wrpr",      F3(2, 0x32, 0),         F3(~2, ~0x32, ~0)|SIMM13(~0),   "1,!", 0, v9 },
-{ "wrpr",      F3(2, 0x32, 0),         F3(~2, ~0x32, ~0)|SIMM13(~0),   "!", 0, v9 },
-{ "wrpr",      F3(2, 0x32, 1),         F3(~2, ~0x32, ~1),      "1,i,!", 0, v9 },
-{ "wrpr",      F3(2, 0x32, 1),         F3(~2, ~0x32, ~1),      "i,1,!", 0, v9 },
-{ "wrpr",      F3(2, 0x32, 1),         F3(~2, ~0x32, ~1),      "i,!", 0, v9 },
-
-{ "mov",       F3(2, 0x30, 0),         F3(~2, ~0x30, ~0)|ASI(~0),              "1,2,m", F_ALIAS, v8 }, /* wr r,r,%asrX */
-{ "mov",       F3(2, 0x30, 0),         F3(~2, ~0x30, ~0)|RD_G0|ASI(~0),        "1,2,y", F_ALIAS, v6 }, /* wr r,r,%y */
-{ "mov",       F3(2, 0x30, 1),         F3(~2, ~0x30, ~1),                      "1,i,m", F_ALIAS, v8 }, /* wr r,i,%asrX */
-{ "mov",       F3(2, 0x30, 1),         F3(~2, ~0x30, ~1)|RD_G0,                "1,i,y", F_ALIAS, v6 }, /* wr r,i,%y */
-{ "mov",       F3(2, 0x31, 0),         F3(~2, ~0x31, ~0)|RD_G0|ASI(~0),        "1,2,p", F_ALIAS, v6 }, /* wr r,r,%psr */
-{ "mov",       F3(2, 0x31, 1),         F3(~2, ~0x31, ~1)|RD_G0,                "1,i,p", F_ALIAS, v6 }, /* wr r,i,%psr */
-{ "mov",       F3(2, 0x32, 0),         F3(~2, ~0x32, ~0)|RD_G0|ASI(~0),        "1,2,w", F_ALIAS, v6 }, /* wr r,r,%wim */
-{ "mov",       F3(2, 0x32, 1),         F3(~2, ~0x32, ~1)|RD_G0,                "1,i,w", F_ALIAS, v6 }, /* wr r,i,%wim */
-{ "mov",       F3(2, 0x33, 0),         F3(~2, ~0x33, ~0)|RD_G0|ASI(~0),        "1,2,t", F_ALIAS, v6 }, /* wr r,r,%tbr */
-{ "mov",       F3(2, 0x33, 1),         F3(~2, ~0x33, ~1)|RD_G0,                "1,i,t", F_ALIAS, v6 }, /* wr r,i,%tbr */
-
-{ "mov",       F3(2, 0x28, 0),          F3(~2, ~0x28, ~0)|SIMM13(~0),                  "M,d", F_ALIAS, v8 }, /* rd %asr1,r */
-{ "mov",       F3(2, 0x28, 0),          F3(~2, ~0x28, ~0)|RS1_G0|SIMM13(~0),           "y,d", F_ALIAS, v6 }, /* rd %y,r */
-{ "mov",       F3(2, 0x29, 0),          F3(~2, ~0x29, ~0)|RS1_G0|SIMM13(~0),           "p,d", F_ALIAS, v6 }, /* rd %psr,r */
-{ "mov",       F3(2, 0x2a, 0),          F3(~2, ~0x2a, ~0)|RS1_G0|SIMM13(~0),           "w,d", F_ALIAS, v6 }, /* rd %wim,r */
-{ "mov",       F3(2, 0x2b, 0),          F3(~2, ~0x2b, ~0)|RS1_G0|SIMM13(~0),           "t,d", F_ALIAS, v6 }, /* rd %tbr,r */
-
-{ "mov",       F3(2, 0x30, 0), F3(~2, ~0x30, ~0)|ASI_RS2(~0),  "1,y", F_ALIAS, v6 }, /* wr rs1,%g0,%y */
-{ "mov",       F3(2, 0x30, 1), F3(~2, ~0x30, ~1),              "i,y", F_ALIAS, v6 },
-{ "mov",       F3(2, 0x30, 1), F3(~2, ~0x30, ~1)|SIMM13(~0),   "1,y", F_ALIAS, v6 }, /* wr rs1,0,%y */
-{ "mov",       F3(2, 0x31, 0), F3(~2, ~0x31, ~0)|ASI_RS2(~0),  "1,p", F_ALIAS, v6 }, /* wr rs1,%g0,%psr */
-{ "mov",       F3(2, 0x31, 1), F3(~2, ~0x31, ~1),              "i,p", F_ALIAS, v6 },
-{ "mov",       F3(2, 0x31, 1), F3(~2, ~0x31, ~1)|SIMM13(~0),   "1,p", F_ALIAS, v6 }, /* wr rs1,0,%psr */
-{ "mov",       F3(2, 0x32, 0), F3(~2, ~0x32, ~0)|ASI_RS2(~0),  "1,w", F_ALIAS, v6 }, /* wr rs1,%g0,%wim */
-{ "mov",       F3(2, 0x32, 1), F3(~2, ~0x32, ~1),              "i,w", F_ALIAS, v6 },
-{ "mov",       F3(2, 0x32, 1), F3(~2, ~0x32, ~1)|SIMM13(~0),   "1,w", F_ALIAS, v6 }, /* wr rs1,0,%wim */
-{ "mov",       F3(2, 0x33, 0), F3(~2, ~0x33, ~0)|ASI_RS2(~0),  "1,t", F_ALIAS, v6 }, /* wr rs1,%g0,%tbr */
-{ "mov",       F3(2, 0x33, 1), F3(~2, ~0x33, ~1),              "i,t", F_ALIAS, v6 },
-{ "mov",       F3(2, 0x33, 1), F3(~2, ~0x33, ~1)|SIMM13(~0),   "1,t", F_ALIAS, v6 }, /* wr rs1,0,%tbr */
-
-{ "mov",       F3(2, 0x02, 0), F3(~2, ~0x02, ~0)|RS1_G0|ASI(~0),       "2,d", 0, v6 }, /* or %g0,rs2,d */
-{ "mov",       F3(2, 0x02, 1), F3(~2, ~0x02, ~1)|RS1_G0,               "i,d", 0, v6 }, /* or %g0,i,d   */
-{ "mov",        F3(2, 0x02, 0), F3(~2, ~0x02, ~0)|ASI_RS2(~0),         "1,d", 0, v6 }, /* or rs1,%g0,d   */
-{ "mov",        F3(2, 0x02, 1), F3(~2, ~0x02, ~1)|SIMM13(~0),          "1,d", 0, v6 }, /* or rs1,0,d */
-
-{ "or",        F3(2, 0x02, 0), F3(~2, ~0x02, ~0)|ASI(~0),      "1,2,d", 0, v6 },
-{ "or",        F3(2, 0x02, 1), F3(~2, ~0x02, ~1),              "1,i,d", 0, v6 },
-{ "or",        F3(2, 0x02, 1), F3(~2, ~0x02, ~1),              "i,1,d", 0, v6 },
-
-{ "bset",      F3(2, 0x02, 0), F3(~2, ~0x02, ~0)|ASI(~0),      "2,r", F_ALIAS, v6 },   /* or rd,rs2,rd */
-{ "bset",      F3(2, 0x02, 1), F3(~2, ~0x02, ~1),              "i,r", F_ALIAS, v6 },   /* or rd,i,rd */
-
-/* This is not a commutative instruction.  */
-{ "andn",      F3(2, 0x05, 0), F3(~2, ~0x05, ~0)|ASI(~0),      "1,2,d", 0, v6 },
-{ "andn",      F3(2, 0x05, 1), F3(~2, ~0x05, ~1),              "1,i,d", 0, v6 },
-
-/* This is not a commutative instruction.  */
-{ "andncc",    F3(2, 0x15, 0), F3(~2, ~0x15, ~0)|ASI(~0),      "1,2,d", 0, v6 },
-{ "andncc",    F3(2, 0x15, 1), F3(~2, ~0x15, ~1),              "1,i,d", 0, v6 },
-
-{ "bclr",      F3(2, 0x05, 0), F3(~2, ~0x05, ~0)|ASI(~0),      "2,r", F_ALIAS, v6 },   /* andn rd,rs2,rd */
-{ "bclr",      F3(2, 0x05, 1), F3(~2, ~0x05, ~1),              "i,r", F_ALIAS, v6 },   /* andn rd,i,rd */
-
-{ "cmp",       F3(2, 0x14, 0), F3(~2, ~0x14, ~0)|RD_G0|ASI(~0),        "1,2", 0, v6 }, /* subcc rs1,rs2,%g0 */
-{ "cmp",       F3(2, 0x14, 1), F3(~2, ~0x14, ~1)|RD_G0,                "1,i", 0, v6 }, /* subcc rs1,i,%g0 */
-
-{ "sub",       F3(2, 0x04, 0), F3(~2, ~0x04, ~0)|ASI(~0),      "1,2,d", 0, v6 },
-{ "sub",       F3(2, 0x04, 1), F3(~2, ~0x04, ~1),              "1,i,d", 0, v6 },
-
-{ "subcc",     F3(2, 0x14, 0), F3(~2, ~0x14, ~0)|ASI(~0),      "1,2,d", 0, v6 },
-{ "subcc",     F3(2, 0x14, 1), F3(~2, ~0x14, ~1),              "1,i,d", 0, v6 },
-
-/* FIXME These are marked F_ALIAS, so that they won't conflict with new v9
-   insns when v9 is present.  Otherwise, the F_ALIAS flag is ignored.  */
-{ "subx",      F3(2, 0x0c, 0), F3(~2, ~0x0c, ~0)|ASI(~0),      "1,2,d", F_ALIAS, v6 },
-{ "subx",      F3(2, 0x0c, 1), F3(~2, ~0x0c, ~1),              "1,i,d", F_ALIAS, v6 },
-{ "subc",      F3(2, 0x0c, 0), F3(~2, ~0x0c, ~0)|ASI(~0),      "1,2,d", 0, v9 },
-{ "subc",      F3(2, 0x0c, 1), F3(~2, ~0x0c, ~1),              "1,i,d", 0, v9 },
-
-/* FIXME These are marked F_ALIAS, so that they won't conflict with new v9
-   insns when v9 is present.  Otherwise, the F_ALIAS flag is ignored.  */
-{ "subxcc",    F3(2, 0x1c, 0), F3(~2, ~0x1c, ~0)|ASI(~0),      "1,2,d", F_ALIAS, v6 },
-{ "subxcc",    F3(2, 0x1c, 1), F3(~2, ~0x1c, ~1),              "1,i,d", F_ALIAS, v6 },
-{ "subccc",    F3(2, 0x1c, 0), F3(~2, ~0x1c, ~0)|ASI(~0),      "1,2,d", 0, v9 },
-{ "subccc",    F3(2, 0x1c, 1), F3(~2, ~0x1c, ~1),              "1,i,d", 0, v9 },
-
-{ "and",       F3(2, 0x01, 0), F3(~2, ~0x01, ~0)|ASI(~0),      "1,2,d", 0, v6 },
-{ "and",       F3(2, 0x01, 1), F3(~2, ~0x01, ~1),              "1,i,d", 0, v6 },
-{ "and",       F3(2, 0x01, 1), F3(~2, ~0x01, ~1),              "i,1,d", 0, v6 },
-
-{ "andcc",     F3(2, 0x11, 0), F3(~2, ~0x11, ~0)|ASI(~0),      "1,2,d", 0, v6 },
-{ "andcc",     F3(2, 0x11, 1), F3(~2, ~0x11, ~1),              "1,i,d", 0, v6 },
-{ "andcc",     F3(2, 0x11, 1), F3(~2, ~0x11, ~1),              "i,1,d", 0, v6 },
-
-{ "dec",       F3(2, 0x04, 1)|SIMM13(0x1), F3(~2, ~0x04, ~1)|SIMM13(~0x0001), "r", F_ALIAS, v6 },      /* sub rd,1,rd */
-{ "dec",       F3(2, 0x04, 1),             F3(~2, ~0x04, ~1),                 "i,r", F_ALIAS, v8 },    /* sub rd,imm,rd */
-{ "deccc",     F3(2, 0x14, 1)|SIMM13(0x1), F3(~2, ~0x14, ~1)|SIMM13(~0x0001), "r", F_ALIAS, v6 },      /* subcc rd,1,rd */
-{ "deccc",     F3(2, 0x14, 1),             F3(~2, ~0x14, ~1),                 "i,r", F_ALIAS, v8 },    /* subcc rd,imm,rd */
-{ "inc",       F3(2, 0x00, 1)|SIMM13(0x1), F3(~2, ~0x00, ~1)|SIMM13(~0x0001), "r", F_ALIAS, v6 },      /* add rd,1,rd */
-{ "inc",       F3(2, 0x00, 1),             F3(~2, ~0x00, ~1),                 "i,r", F_ALIAS, v8 },    /* add rd,imm,rd */
-{ "inccc",     F3(2, 0x10, 1)|SIMM13(0x1), F3(~2, ~0x10, ~1)|SIMM13(~0x0001), "r", F_ALIAS, v6 },      /* addcc rd,1,rd */
-{ "inccc",     F3(2, 0x10, 1),             F3(~2, ~0x10, ~1),                 "i,r", F_ALIAS, v8 },    /* addcc rd,imm,rd */
-
-{ "btst",      F3(2, 0x11, 0), F3(~2, ~0x11, ~0)|RD_G0|ASI(~0), "1,2", F_ALIAS, v6 },  /* andcc rs1,rs2,%g0 */
-{ "btst",      F3(2, 0x11, 1), F3(~2, ~0x11, ~1)|RD_G0, "i,1", F_ALIAS, v6 },  /* andcc rs1,i,%g0 */
-
-{ "neg",       F3(2, 0x04, 0), F3(~2, ~0x04, ~0)|RS1_G0|ASI(~0), "2,d", F_ALIAS, v6 }, /* sub %g0,rs2,rd */
-{ "neg",       F3(2, 0x04, 0), F3(~2, ~0x04, ~0)|RS1_G0|ASI(~0), "r", F_ALIAS, v6 }, /* sub %g0,rd,rd */
-
-{ "add",       F3(2, 0x00, 0), F3(~2, ~0x00, ~0)|ASI(~0),      "1,2,d", 0, v6 },
-{ "add",       F3(2, 0x00, 1), F3(~2, ~0x00, ~1),              "1,i,d", 0, v6 },
-{ "add",       F3(2, 0x00, 1), F3(~2, ~0x00, ~1),              "i,1,d", 0, v6 },
-{ "addcc",     F3(2, 0x10, 0), F3(~2, ~0x10, ~0)|ASI(~0),      "1,2,d", 0, v6 },
-{ "addcc",     F3(2, 0x10, 1), F3(~2, ~0x10, ~1),              "1,i,d", 0, v6 },
-{ "addcc",     F3(2, 0x10, 1), F3(~2, ~0x10, ~1),              "i,1,d", 0, v6 },
-/* FIXME These are marked F_ALIAS, so that they won't conflict with new v9
-   insns when v9 is present.  Otherwise, the F_ALIAS flag is ignored.  */
-{ "addx",      F3(2, 0x08, 0), F3(~2, ~0x08, ~0)|ASI(~0),      "1,2,d", F_ALIAS, v6 },
-{ "addx",      F3(2, 0x08, 1), F3(~2, ~0x08, ~1),              "1,i,d", F_ALIAS, v6 },
-{ "addx",      F3(2, 0x08, 1), F3(~2, ~0x08, ~1),              "i,1,d", F_ALIAS, v6 },
-{ "addc",      F3(2, 0x08, 0), F3(~2, ~0x08, ~0)|ASI(~0),      "1,2,d", 0, v9 },
-{ "addc",      F3(2, 0x08, 1), F3(~2, ~0x08, ~1),              "1,i,d", 0, v9 },
-{ "addc",      F3(2, 0x08, 1), F3(~2, ~0x08, ~1),              "i,1,d", 0, v9 },
-/* FIXME These are marked F_ALIAS, so that they won't conflict with new v9
-   insns when v9 is present.  Otherwise, the F_ALIAS flag is ignored.  */
-{ "addxcc",    F3(2, 0x18, 0), F3(~2, ~0x18, ~0)|ASI(~0),      "1,2,d", F_ALIAS, v6 },
-{ "addxcc",    F3(2, 0x18, 1), F3(~2, ~0x18, ~1),              "1,i,d", F_ALIAS, v6 },
-{ "addxcc",    F3(2, 0x18, 1), F3(~2, ~0x18, ~1),              "i,1,d", F_ALIAS, v6 },
-{ "addccc",    F3(2, 0x18, 0), F3(~2, ~0x18, ~0)|ASI(~0),      "1,2,d", 0, v9 },
-{ "addccc",    F3(2, 0x18, 1), F3(~2, ~0x18, ~1),              "1,i,d", 0, v9 },
-{ "addccc",    F3(2, 0x18, 1), F3(~2, ~0x18, ~1),              "i,1,d", 0, v9 },
-
-{ "smul",      F3(2, 0x0b, 0), F3(~2, ~0x0b, ~0)|ASI(~0),      "1,2,d", 0, v8 },
-{ "smul",      F3(2, 0x0b, 1), F3(~2, ~0x0b, ~1),              "1,i,d", 0, v8 },
-{ "smul",      F3(2, 0x0b, 1), F3(~2, ~0x0b, ~1),              "i,1,d", 0, v8 },
-{ "smulcc",    F3(2, 0x1b, 0), F3(~2, ~0x1b, ~0)|ASI(~0),      "1,2,d", 0, v8 },
-{ "smulcc",    F3(2, 0x1b, 1), F3(~2, ~0x1b, ~1),              "1,i,d", 0, v8 },
-{ "smulcc",    F3(2, 0x1b, 1), F3(~2, ~0x1b, ~1),              "i,1,d", 0, v8 },
-{ "umul",      F3(2, 0x0a, 0), F3(~2, ~0x0a, ~0)|ASI(~0),      "1,2,d", 0, v8 },
-{ "umul",      F3(2, 0x0a, 1), F3(~2, ~0x0a, ~1),              "1,i,d", 0, v8 },
-{ "umul",      F3(2, 0x0a, 1), F3(~2, ~0x0a, ~1),              "i,1,d", 0, v8 },
-{ "umulcc",    F3(2, 0x1a, 0), F3(~2, ~0x1a, ~0)|ASI(~0),      "1,2,d", 0, v8 },
-{ "umulcc",    F3(2, 0x1a, 1), F3(~2, ~0x1a, ~1),              "1,i,d", 0, v8 },
-{ "umulcc",    F3(2, 0x1a, 1), F3(~2, ~0x1a, ~1),              "i,1,d", 0, v8 },
-{ "sdiv",      F3(2, 0x0f, 0), F3(~2, ~0x0f, ~0)|ASI(~0),      "1,2,d", 0, v8 },
-{ "sdiv",      F3(2, 0x0f, 1), F3(~2, ~0x0f, ~1),              "1,i,d", 0, v8 },
-{ "sdiv",      F3(2, 0x0f, 1), F3(~2, ~0x0f, ~1),              "i,1,d", 0, v8 },
-{ "sdivcc",    F3(2, 0x1f, 0), F3(~2, ~0x1f, ~0)|ASI(~0),      "1,2,d", 0, v8 },
-{ "sdivcc",    F3(2, 0x1f, 1), F3(~2, ~0x1f, ~1),              "1,i,d", 0, v8 },
-{ "sdivcc",    F3(2, 0x1f, 1), F3(~2, ~0x1f, ~1),              "i,1,d", 0, v8 },
-{ "udiv",      F3(2, 0x0e, 0), F3(~2, ~0x0e, ~0)|ASI(~0),      "1,2,d", 0, v8 },
-{ "udiv",      F3(2, 0x0e, 1), F3(~2, ~0x0e, ~1),              "1,i,d", 0, v8 },
-{ "udiv",      F3(2, 0x0e, 1), F3(~2, ~0x0e, ~1),              "i,1,d", 0, v8 },
-{ "udivcc",    F3(2, 0x1e, 0), F3(~2, ~0x1e, ~0)|ASI(~0),      "1,2,d", 0, v8 },
-{ "udivcc",    F3(2, 0x1e, 1), F3(~2, ~0x1e, ~1),              "1,i,d", 0, v8 },
-{ "udivcc",    F3(2, 0x1e, 1), F3(~2, ~0x1e, ~1),              "i,1,d", 0, v8 },
-
-{ "mulx",      F3(2, 0x09, 0), F3(~2, ~0x09, ~0)|ASI(~0),      "1,2,d", 0, v9 },
-{ "mulx",      F3(2, 0x09, 1), F3(~2, ~0x09, ~1),              "1,i,d", 0, v9 },
-{ "sdivx",     F3(2, 0x2d, 0), F3(~2, ~0x2d, ~0)|ASI(~0),      "1,2,d", 0, v9 },
-{ "sdivx",     F3(2, 0x2d, 1), F3(~2, ~0x2d, ~1),              "1,i,d", 0, v9 },
-{ "udivx",     F3(2, 0x0d, 0), F3(~2, ~0x0d, ~0)|ASI(~0),      "1,2,d", 0, v9 },
-{ "udivx",     F3(2, 0x0d, 1), F3(~2, ~0x0d, ~1),              "1,i,d", 0, v9 },
-
-{ "call",      F1(0x1), F1(~0x1), "L", F_DELAYED, v6 },
-{ "call",      F1(0x1), F1(~0x1), "L,#", F_DELAYED, v6 },
-{ "call",      F3(2, 0x38, 0)|RD(0xf), F3(~2, ~0x38, ~0)|RD(~0xf)|ASI_RS2(~0), "1", F_DELAYED, v6 }, /* jmpl rs1+%g0, %o7 */
-{ "call",      F3(2, 0x38, 0)|RD(0xf), F3(~2, ~0x38, ~0)|RD(~0xf)|ASI_RS2(~0), "1,#", F_DELAYED, v6 },
-
-/* Conditional instructions.
-
-   Because this part of the table was such a mess earlier, I have
-   macrofied it so that all the branches and traps are generated from
-   a single-line description of each condition value.  John Gilmore. */
-
-/* Define branches -- one annulled, one without, etc. */
-#define br(opcode, mask, lose, flags) \
- { opcode, (mask)|ANNUL, (lose),       ",a l",   (flags), v6 }, \
- { opcode, (mask)      , (lose)|ANNUL, "l",     (flags), v6 }
-
-#define brx(opcode, mask, lose, flags) /* v9 */ \
- { opcode, (mask), (lose)|ANNUL|BPRED, "Z,G",   (flags), v9 }, \
- { opcode, (mask), (lose)|ANNUL|BPRED, ",N Z,G",   (flags), v9 }, \
- { opcode, (mask)|ANNUL, (lose)|BPRED, ",a Z,G", (flags), v9 }, \
- { opcode, (mask)|ANNUL, (lose)|BPRED, ",a,N Z,G", (flags), v9 }, \
- { opcode, (mask)|BPRED, (lose)|ANNUL, ",T Z,G",   (flags), v9 }, \
- { opcode, (mask)|ANNUL|BPRED, (lose), ",a,T Z,G", (flags), v9 }, \
- { opcode, (mask), (lose)|ANNUL|BPRED, "z,G",   (flags), v9 }, \
- { opcode, (mask), (lose)|ANNUL|BPRED, ",N z,G",   (flags), v9 }, \
- { opcode, (mask)|ANNUL, (lose)|BPRED, ",a z,G", (flags), v9 }, \
- { opcode, (mask)|ANNUL, (lose)|BPRED, ",a,N z,G", (flags), v9 }, \
- { opcode, (mask)|BPRED, (lose)|ANNUL, ",T z,G",   (flags), v9 }, \
- { opcode, (mask)|ANNUL|BPRED, (lose), ",a,T z,G", (flags), v9 }
-
-/* Define four traps: reg+reg, reg + immediate, immediate alone, reg alone. */
-#define tr(opcode, mask, lose, flags) \
- { opcode, (mask)|(2<<11)|IMMED, (lose)|RS1_G0,        "Z,i",   (flags), v9 }, /* %g0 + imm */ \
- { opcode, (mask)|(2<<11)|IMMED, (lose),       "Z,1+i", (flags), v9 }, /* rs1 + imm */ \
- { opcode, (mask)|(2<<11), IMMED|(lose),       "Z,1+2", (flags), v9 }, /* rs1 + rs2 */ \
- { opcode, (mask)|(2<<11), IMMED|(lose)|RS2_G0,        "Z,1",   (flags), v9 }, /* rs1 + %g0 */ \
- { opcode, (mask)|IMMED, (lose)|RS1_G0,        "z,i",   (flags)|F_ALIAS, v9 }, /* %g0 + imm */ \
- { opcode, (mask)|IMMED, (lose),       "z,1+i", (flags)|F_ALIAS, v9 }, /* rs1 + imm */ \
- { opcode, (mask), IMMED|(lose),       "z,1+2", (flags)|F_ALIAS, v9 }, /* rs1 + rs2 */ \
- { opcode, (mask), IMMED|(lose)|RS2_G0,        "z,1",   (flags)|F_ALIAS, v9 }, /* rs1 + %g0 */ \
- { opcode, (mask)|IMMED, (lose)|RS1_G0,                "i",     (flags), v6 }, /* %g0 + imm */ \
- { opcode, (mask)|IMMED, (lose),               "1+i",   (flags), v6 }, /* rs1 + imm */ \
- { opcode, (mask), IMMED|(lose),               "1+2",   (flags), v6 }, /* rs1 + rs2 */ \
- { opcode, (mask), IMMED|(lose)|RS2_G0,                "1",     (flags), v6 } /* rs1 + %g0 */
-
-/* Define both branches and traps based on condition mask */
-#define cond(bop, top, mask, flags) \
-  br(bop,  F2(0, 2)|(mask), F2(~0, ~2)|((~mask)&COND(~0)), F_DELAYED|(flags)), \
-  brx(bop, F2(0, 1)|(mask), F2(~0, ~1)|((~mask)&COND(~0)), F_DELAYED|(flags)), /* v9 */ \
-  tr(top,  F3(2, 0x3a, 0)|(mask), F3(~2, ~0x3a, 0)|((~mask)&COND(~0)), (flags))
-
-/* Define all the conditions, all the branches, all the traps.  */
-
-cond ("b",     "t",    CONDA, 0),
-cond ("ba",    "ta",   CONDA, F_ALIAS), /* for nothing */
-cond ("bcc",   "tcc",  CONDCC, 0),
-cond ("bcs",   "tcs",  CONDCS, 0),
-cond ("be",    "te",   CONDE, 0),
-cond ("bg",    "tg",   CONDG, 0),
-cond ("bgt",   "tgt",   CONDG, F_ALIAS),
-cond ("bge",   "tge",  CONDGE, 0),
-cond ("bgeu",  "tgeu", CONDGEU, F_ALIAS), /* for cc */
-cond ("bgu",   "tgu",  CONDGU, 0),
-cond ("bl",    "tl",   CONDL, 0),
-cond ("blt",   "tlt",   CONDL, F_ALIAS),
-cond ("ble",   "tle",  CONDLE, 0),
-cond ("bleu",  "tleu", CONDLEU, 0),
-cond ("blu",   "tlu",  CONDLU, F_ALIAS), /* for cs */
-cond ("bn",    "tn",   CONDN, 0),
-cond ("bne",   "tne",  CONDNE, 0),
-cond ("bneg",  "tneg", CONDNEG, 0),
-cond ("bnz",   "tnz",  CONDNZ, F_ALIAS), /* for ne */
-cond ("bpos",  "tpos", CONDPOS, 0),
-cond ("bvc",   "tvc",  CONDVC, 0),
-cond ("bvs",   "tvs",  CONDVS, 0),
-cond ("bz",    "tz",   CONDZ, F_ALIAS), /* for e */
-
-#undef cond
-#undef br
-#undef brr /* v9 */
-#undef tr
-
-#define brr(opcode, mask, lose, flags) /* v9 */ \
- { opcode, (mask), (lose)|ANNUL|BPRED, "1,k",   F_DELAYED|(flags), v9 }, \
- { opcode, (mask), (lose)|ANNUL|BPRED, ",N 1,k", F_DELAYED|(flags), v9 }, \
- { opcode, (mask)|ANNUL, (lose)|BPRED, ",a 1,k", F_DELAYED|(flags), v9 }, \
- { opcode, (mask)|ANNUL, (lose)|BPRED, ",a,N 1,k", F_DELAYED|(flags), v9 }, \
- { opcode, (mask)|BPRED, (lose)|ANNUL, ",T 1,k",   F_DELAYED|(flags), v9 }, \
- { opcode, (mask)|ANNUL|BPRED, (lose), ",a,T 1,k", F_DELAYED|(flags), v9 }
-
-#define condr(bop, mask, flags) /* v9 */ \
-  brr(bop, F2(0, 3)|COND(mask), F2(~0, ~3)|COND(~(mask)), (flags)) /* v9 */
-
-/* v9 */ condr("brnz", 0x5, 0),
-/* v9 */ condr("brz", 0x1, 0),
-/* v9 */ condr("brgez", 0x7, 0),
-/* v9 */ condr("brlz", 0x3, 0),
-/* v9 */ condr("brlez", 0x2, 0),
-/* v9 */ condr("brgz", 0x6, 0),
-
-#undef condr /* v9 */
-#undef brr /* v9 */
-
-#define movr(opcode, mask, flags) /* v9 */ \
- { opcode, F3(2, 0x2f, 0)|COND(mask), F3(~2, ~0x2f, ~0)|COND(~(mask)), "1,2,d", (flags), v9 }, \
- { opcode, F3(2, 0x2f, 1)|COND(mask), F3(~2, ~0x2f, ~1)|COND(~(mask)), "1,j,d", (flags), v9 }
-
-#define fmrrs(opcode, mask, lose, flags) /* v9 */ \
- { opcode, (mask), (lose), "1,f,g", (flags), v9 }
-#define fmrrd(opcode, mask, lose, flags) /* v9 */ \
- { opcode, (mask), (lose), "1,B,H", (flags), v9 }
-#define fmrrq(opcode, mask, lose, flags) /* v9 */ \
- { opcode, (mask), (lose), "1,R,J", (flags), v9 }
-
-#define fmovrs(mop, mask, flags) /* v9 */ \
-  fmrrs(mop, F3(2, 0x35, 0)|OPF_LOW5(5)|COND(mask), F3(~2, ~0x35, 0)|OPF_LOW5(~5)|COND(~(mask)), (flags)) /* v9 */
-#define fmovrd(mop, mask, flags) /* v9 */ \
-  fmrrd(mop, F3(2, 0x35, 0)|OPF_LOW5(6)|COND(mask), F3(~2, ~0x35, 0)|OPF_LOW5(~6)|COND(~(mask)), (flags)) /* v9 */
-#define fmovrq(mop, mask, flags) /* v9 */ \
-  fmrrq(mop, F3(2, 0x35, 0)|OPF_LOW5(7)|COND(mask), F3(~2, ~0x35, 0)|OPF_LOW5(~7)|COND(~(mask)), (flags)) /* v9 */
-
-/* v9 */ movr("movrne", 0x5, 0),
-/* v9 */ movr("movre", 0x1, 0),
-/* v9 */ movr("movrgez", 0x7, 0),
-/* v9 */ movr("movrlz", 0x3, 0),
-/* v9 */ movr("movrlez", 0x2, 0),
-/* v9 */ movr("movrgz", 0x6, 0),
-/* v9 */ movr("movrnz", 0x5, F_ALIAS),
-/* v9 */ movr("movrz", 0x1, F_ALIAS),
-
-/* v9 */ fmovrs("fmovrsne", 0x5, 0),
-/* v9 */ fmovrs("fmovrse", 0x1, 0),
-/* v9 */ fmovrs("fmovrsgez", 0x7, 0),
-/* v9 */ fmovrs("fmovrslz", 0x3, 0),
-/* v9 */ fmovrs("fmovrslez", 0x2, 0),
-/* v9 */ fmovrs("fmovrsgz", 0x6, 0),
-/* v9 */ fmovrs("fmovrsnz", 0x5, F_ALIAS),
-/* v9 */ fmovrs("fmovrsz", 0x1, F_ALIAS),
-
-/* v9 */ fmovrd("fmovrdne", 0x5, 0),
-/* v9 */ fmovrd("fmovrde", 0x1, 0),
-/* v9 */ fmovrd("fmovrdgez", 0x7, 0),
-/* v9 */ fmovrd("fmovrdlz", 0x3, 0),
-/* v9 */ fmovrd("fmovrdlez", 0x2, 0),
-/* v9 */ fmovrd("fmovrdgz", 0x6, 0),
-/* v9 */ fmovrd("fmovrdnz", 0x5, F_ALIAS),
-/* v9 */ fmovrd("fmovrdz", 0x1, F_ALIAS),
-
-/* v9 */ fmovrq("fmovrqne", 0x5, 0),
-/* v9 */ fmovrq("fmovrqe", 0x1, 0),
-/* v9 */ fmovrq("fmovrqgez", 0x7, 0),
-/* v9 */ fmovrq("fmovrqlz", 0x3, 0),
-/* v9 */ fmovrq("fmovrqlez", 0x2, 0),
-/* v9 */ fmovrq("fmovrqgz", 0x6, 0),
-/* v9 */ fmovrq("fmovrqnz", 0x5, F_ALIAS),
-/* v9 */ fmovrq("fmovrqz", 0x1, F_ALIAS),
-
-#undef movr /* v9 */
-#undef fmovr /* v9 */
-#undef fmrr /* v9 */
-
-{ "mova",      F3(2, 0x2c, 0)|FCC(0)|MCOND(FCONDA,0), MCOND(~FCONDA,~0)|FCC(~0)|F3(~2, ~0x2c, ~0), "6,2,d", 0, v9 },
-{ "mova",      F3(2, 0x2c, 1)|FCC(0)|MCOND(FCONDA,0), MCOND(~FCONDA,~0)|FCC(~0)|F3(~2, ~0x2c,~1), "6,I,d", 0, v9 },
-{ "mova",      F3(2, 0x2c, 0)|FCC(1)|MCOND(FCONDA,0), MCOND(~FCONDA,~0)|FCC(~1)|F3(~2, ~0x2c, ~0), "7,2,d", 0, v9 },
-{ "mova",      F3(2, 0x2c, 1)|FCC(1)|MCOND(FCONDA,0), MCOND(~FCONDA,~0)|FCC(~1)|F3(~2, ~0x2c, ~1), "7,I,d", 0, v9 },
-{ "mova",      F3(2, 0x2c, 0)|FCC(2)|MCOND(FCONDA,0), MCOND(~FCONDA,~0)|FCC(~2)|F3(~2, ~0x2c, ~0), "8,2,d", 0, v9 },
-{ "mova",      F3(2, 0x2c, 1)|FCC(2)|MCOND(FCONDA,0), MCOND(~FCONDA,~0)|FCC(~2)|F3(~2, ~0x2c, ~1), "8,I,d", 0, v9 },
-{ "mova",      F3(2, 0x2c, 0)|FCC(3)|MCOND(FCONDA,0), MCOND(~FCONDA,~0)|FCC(~3)|F3(~2, ~0x2c, ~0), "9,2,d", 0, v9 },
-{ "mova",      F3(2, 0x2c, 1)|FCC(3)|MCOND(FCONDA,0), MCOND(~FCONDA,~0)|FCC(~3)|F3(~2, ~0x2c, ~1), "9,I,d", 0, v9 },
-{ "mova",      F3(2, 0x2c, 0)|MCOND(CONDA,1)|ICC, F3(~2, ~0x2c, ~0)|MCOND(~CONDA,~1)|XCC|(1<<12), "z,2,d", 0, v9 },
-{ "mova",      F3(2, 0x2c, 1)|MCOND(CONDA,1)|ICC, F3(~2, ~0x2c, ~1)|MCOND(~CONDA,~1)|XCC|(1<<12), "z,I,d", 0, v9 },
-{ "mova",      F3(2, 0x2c, 0)|MCOND(CONDA,1)|XCC, F3(~2, ~0x2c, ~0)|MCOND(~CONDA,~1)|(1<<12), "Z,2,d", 0, v9 },
-{ "mova",      F3(2, 0x2c, 1)|MCOND(CONDA,1)|XCC, F3(~2, ~0x2c, ~1)|MCOND(~CONDA,~1)|(1<<12), "Z,I,d", 0, v9 },
-{ "movcc",     F3(2, 0x2c, 0)|MCOND(CONDCC,1)|ICC, F3(~2, ~0x2c, ~0)|MCOND(~CONDCC,~1)|XCC|(1<<12), "z,2,d", 0, v9 },
-{ "movcc",     F3(2, 0x2c, 1)|MCOND(CONDCC,1)|ICC, F3(~2, ~0x2c, ~1)|MCOND(~CONDCC,~1)|XCC|(1<<12), "z,I,d", 0, v9 },
-{ "movcc",     F3(2, 0x2c, 0)|MCOND(CONDCC,1)|XCC, F3(~2, ~0x2c, ~0)|MCOND(~CONDCC,~1)|(1<<12), "Z,2,d", 0, v9 },
-{ "movcc",     F3(2, 0x2c, 1)|MCOND(CONDCC,1)|XCC, F3(~2, ~0x2c, ~1)|MCOND(~CONDCC,~1)|(1<<12), "Z,I,d", 0, v9 },
-{ "movgeu",    F3(2, 0x2c, 0)|MCOND(CONDGEU,1)|ICC, F3(~2, ~0x2c, ~0)|MCOND(~CONDGEU,~1)|XCC|(1<<12), "z,2,d", F_ALIAS, v9 },
-{ "movgeu",    F3(2, 0x2c, 1)|MCOND(CONDGEU,1)|ICC, F3(~2, ~0x2c, ~1)|MCOND(~CONDGEU,~1)|XCC|(1<<12), "z,I,d", F_ALIAS, v9 },
-{ "movgeu",    F3(2, 0x2c, 0)|MCOND(CONDGEU,1)|XCC, F3(~2, ~0x2c, ~0)|MCOND(~CONDGEU,~1)|(1<<12), "Z,2,d", F_ALIAS, v9 },
-{ "movgeu",    F3(2, 0x2c, 1)|MCOND(CONDGEU,1)|XCC, F3(~2, ~0x2c, ~1)|MCOND(~CONDGEU,~1)|(1<<12), "Z,I,d", F_ALIAS, v9 },
-{ "movcs",     F3(2, 0x2c, 0)|MCOND(CONDCS,1)|ICC, F3(~2, ~0x2c, ~0)|MCOND(~CONDCS,~1)|XCC|(1<<12), "z,2,d", 0, v9 },
-{ "movcs",     F3(2, 0x2c, 1)|MCOND(CONDCS,1)|ICC, F3(~2, ~0x2c, ~1)|MCOND(~CONDCS,~1)|XCC|(1<<12), "z,I,d", 0, v9 },
-{ "movcs",     F3(2, 0x2c, 0)|MCOND(CONDCS,1)|XCC, F3(~2, ~0x2c, ~0)|MCOND(~CONDCS,~1)|(1<<12), "Z,2,d", 0, v9 },
-{ "movcs",     F3(2, 0x2c, 1)|MCOND(CONDCS,1)|XCC, F3(~2, ~0x2c, ~1)|MCOND(~CONDCS,~1)|(1<<12), "Z,I,d", 0, v9 },
-{ "movlu",     F3(2, 0x2c, 0)|MCOND(CONDLU,1)|ICC, F3(~2, ~0x2c, ~0)|MCOND(~CONDLU,~1)|XCC|(1<<12), "z,2,d", F_ALIAS, v9 },
-{ "movlu",     F3(2, 0x2c, 1)|MCOND(CONDLU,1)|ICC, F3(~2, ~0x2c, ~1)|MCOND(~CONDLU,~1)|XCC|(1<<12), "z,I,d", F_ALIAS, v9 },
-{ "movlu",     F3(2, 0x2c, 0)|MCOND(CONDLU,1)|XCC, F3(~2, ~0x2c, ~0)|MCOND(~CONDLU,~1)|(1<<12), "Z,2,d", F_ALIAS, v9 },
-{ "movlu",     F3(2, 0x2c, 1)|MCOND(CONDLU,1)|XCC, F3(~2, ~0x2c, ~1)|MCOND(~CONDLU,~1)|(1<<12), "Z,I,d", F_ALIAS, v9 },
-{ "move",      F3(2, 0x2c, 0)|FCC(0)|MCOND(FCONDE,0), MCOND(~FCONDE,~0)|FCC(~0)|F3(~2, ~0x2c, ~0), "6,2,d", 0, v9 },
-{ "move",      F3(2, 0x2c, 1)|FCC(0)|MCOND(FCONDE,0), MCOND(~FCONDE,~0)|FCC(~0)|F3(~2, ~0x2c, ~1), "6,I,d", 0, v9 },
-{ "move",      F3(2, 0x2c, 0)|FCC(1)|MCOND(FCONDE,0), MCOND(~FCONDE,~0)|FCC(~1)|F3(~2, ~0x2c, ~0), "7,2,d", 0, v9 },
-{ "move",      F3(2, 0x2c, 1)|FCC(1)|MCOND(FCONDE,0), MCOND(~FCONDE,~0)|FCC(~1)|F3(~2, ~0x2c, ~1), "7,I,d", 0, v9 },
-{ "move",      F3(2, 0x2c, 0)|FCC(2)|MCOND(FCONDE,0), MCOND(~FCONDE,~0)|FCC(~2)|F3(~2, ~0x2c, ~0), "8,2,d", 0, v9 },
-{ "move",      F3(2, 0x2c, 1)|FCC(2)|MCOND(FCONDE,0), MCOND(~FCONDE,~0)|FCC(~2)|F3(~2, ~0x2c, ~1), "8,I,d", 0, v9 },
-{ "move",      F3(2, 0x2c, 0)|FCC(3)|MCOND(FCONDE,0), MCOND(~FCONDE,~0)|FCC(~3)|F3(~2, ~0x2c, ~0), "9,2,d", 0, v9 },
-{ "move",      F3(2, 0x2c, 1)|FCC(3)|MCOND(FCONDE,0), MCOND(~FCONDE,~0)|FCC(~3)|F3(~2, ~0x2c, ~1), "9,I,d", 0, v9 },
-{ "move",      F3(2, 0x2c, 0)|MCOND(CONDE,1)|ICC, F3(~2, ~0x2c, ~0)|MCOND(~CONDE,~1)|XCC|(1<<12), "z,2,d", 0, v9 },
-{ "move",      F3(2, 0x2c, 1)|MCOND(CONDE,1)|ICC, F3(~2, ~0x2c, ~1)|MCOND(~CONDE,~1)|XCC|(1<<12), "z,I,d", 0, v9 },
-{ "move",      F3(2, 0x2c, 0)|MCOND(CONDE,1)|XCC, F3(~2, ~0x2c, ~0)|MCOND(~CONDE,~1)|(1<<12), "Z,2,d", 0, v9 },
-{ "move",      F3(2, 0x2c, 1)|MCOND(CONDE,1)|XCC, F3(~2, ~0x2c, ~1)|MCOND(~CONDE,~1)|(1<<12), "Z,I,d", 0, v9 },
-{ "movg",      F3(2, 0x2c, 0)|FCC(0)|MCOND(FCONDG,0), MCOND(~FCONDG,~0)|FCC(~0)|F3(~2, ~0x2c, ~0), "6,2,d", 0, v9 },
-{ "movg",      F3(2, 0x2c, 1)|FCC(0)|MCOND(FCONDG,0), MCOND(~FCONDG,~0)|FCC(~0)|F3(~2, ~0x2c, ~1), "6,I,d", 0, v9 },
-{ "movg",      F3(2, 0x2c, 0)|FCC(1)|MCOND(FCONDG,0), MCOND(~FCONDG,~0)|FCC(~1)|F3(~2, ~0x2c, ~0), "7,2,d", 0, v9 },
-{ "movg",      F3(2, 0x2c, 1)|FCC(1)|MCOND(FCONDG,0), MCOND(~FCONDG,~0)|FCC(~1)|F3(~2, ~0x2c, ~1), "7,I,d", 0, v9 },
-{ "movg",      F3(2, 0x2c, 0)|FCC(2)|MCOND(FCONDG,0), MCOND(~FCONDG,~0)|FCC(~2)|F3(~2, ~0x2c, ~0), "8,2,d", 0, v9 },
-{ "movg",      F3(2, 0x2c, 1)|FCC(2)|MCOND(FCONDG,0), MCOND(~FCONDG,~0)|FCC(~2)|F3(~2, ~0x2c, ~1), "8,I,d", 0, v9 },
-{ "movg",      F3(2, 0x2c, 0)|FCC(3)|MCOND(FCONDG,0), MCOND(~FCONDG,~0)|FCC(~3)|F3(~2, ~0x2c, ~0), "9,2,d", 0, v9 },
-{ "movg",      F3(2, 0x2c, 1)|FCC(3)|MCOND(FCONDG,0), MCOND(~FCONDG,~0)|FCC(~3)|F3(~2, ~0x2c, ~1), "9,I,d", 0, v9 },
-{ "movg",      F3(2, 0x2c, 0)|MCOND(CONDG,1)|ICC, F3(~2, ~0x2c, ~0)|MCOND(~CONDG,~1)|XCC|(1<<12), "z,2,d", 0, v9 },
-{ "movg",      F3(2, 0x2c, 1)|MCOND(CONDG,1)|ICC, F3(~2, ~0x2c, ~1)|MCOND(~CONDG,~1)|XCC|(1<<12), "z,I,d", 0, v9 },
-{ "movg",      F3(2, 0x2c, 0)|MCOND(CONDG,1)|XCC, F3(~2, ~0x2c, ~0)|MCOND(~CONDG,~1)|(1<<12), "Z,2,d", 0, v9 },
-{ "movg",      F3(2, 0x2c, 1)|MCOND(CONDG,1)|XCC, F3(~2, ~0x2c, ~1)|MCOND(~CONDG,~1)|(1<<12), "Z,I,d", 0, v9 },
-{ "movge",     F3(2, 0x2c, 0)|FCC(0)|MCOND(FCONDGE,0), MCOND(~FCONDGE,~0)|FCC(~0)|F3(~2, ~0x2c, ~0), "6,2,d", 0, v9 },
-{ "movge",     F3(2, 0x2c, 1)|FCC(0)|MCOND(FCONDGE,0), MCOND(~FCONDGE,~0)|FCC(~0)|F3(~2, ~0x2c, ~1), "6,I,d", 0, v9 },
-{ "movge",     F3(2, 0x2c, 0)|FCC(1)|MCOND(FCONDGE,0), MCOND(~FCONDGE,~0)|FCC(~1)|F3(~2, ~0x2c, ~0), "7,2,d", 0, v9 },
-{ "movge",     F3(2, 0x2c, 1)|FCC(1)|MCOND(FCONDGE,0), MCOND(~FCONDGE,~0)|FCC(~1)|F3(~2, ~0x2c, ~1), "7,I,d", 0, v9 },
-{ "movge",     F3(2, 0x2c, 0)|FCC(2)|MCOND(FCONDGE,0), MCOND(~FCONDGE,~0)|FCC(~2)|F3(~2, ~0x2c, ~0), "8,2,d", 0, v9 },
-{ "movge",     F3(2, 0x2c, 1)|FCC(2)|MCOND(FCONDGE,0), MCOND(~FCONDGE,~0)|FCC(~2)|F3(~2, ~0x2c, ~1), "8,I,d", 0, v9 },
-{ "movge",     F3(2, 0x2c, 0)|FCC(3)|MCOND(FCONDGE,0), MCOND(~FCONDGE,~0)|FCC(~3)|F3(~2, ~0x2c, ~0), "9,2,d", 0, v9 },
-{ "movge",     F3(2, 0x2c, 1)|FCC(3)|MCOND(FCONDGE,0), MCOND(~FCONDGE,~0)|FCC(~3)|F3(~2, ~0x2c, ~1), "9,I,d", 0, v9 },
-{ "movge",     F3(2, 0x2c, 0)|MCOND(CONDGE,1)|ICC, F3(~2, ~0x2c, ~0)|MCOND(~CONDGE,~1)|XCC|(1<<12), "z,2,d", 0, v9 },
-{ "movge",     F3(2, 0x2c, 1)|MCOND(CONDGE,1)|ICC, F3(~2, ~0x2c, ~1)|MCOND(~CONDGE,~1)|XCC|(1<<12), "z,I,d", 0, v9 },
-{ "movge",     F3(2, 0x2c, 0)|MCOND(CONDGE,1)|XCC, F3(~2, ~0x2c, ~0)|MCOND(~CONDGE,~1)|(1<<12), "Z,2,d", 0, v9 },
-{ "movge",     F3(2, 0x2c, 1)|MCOND(CONDGE,1)|XCC, F3(~2, ~0x2c, ~1)|MCOND(~CONDGE,~1)|(1<<12), "Z,I,d", 0, v9 },
-{ "movgu",     F3(2, 0x2c, 0)|MCOND(CONDGU,1)|ICC, F3(~2, ~0x2c, ~0)|MCOND(~CONDGU,~1)|XCC|(1<<12), "z,2,d", 0, v9 },
-{ "movgu",     F3(2, 0x2c, 1)|MCOND(CONDGU,1)|ICC, F3(~2, ~0x2c, ~1)|MCOND(~CONDGU,~1)|XCC|(1<<12), "z,I,d", 0, v9 },
-{ "movgu",     F3(2, 0x2c, 0)|MCOND(CONDGU,1)|XCC, F3(~2, ~0x2c, ~0)|MCOND(~CONDGU,~1)|(1<<12), "Z,2,d", 0, v9 },
-{ "movgu",     F3(2, 0x2c, 1)|MCOND(CONDGU,1)|XCC, F3(~2, ~0x2c, ~1)|MCOND(~CONDGU,~1)|(1<<12), "Z,I,d", 0, v9 },
-{ "movl",      F3(2, 0x2c, 0)|FCC(0)|MCOND(FCONDL,0), MCOND(~FCONDL,~0)|FCC(~0)|F3(~2, ~0x2c, ~0), "6,2,d", 0, v9 },
-{ "movl",      F3(2, 0x2c, 1)|FCC(0)|MCOND(FCONDL,0), MCOND(~FCONDL,~0)|FCC(~0)|F3(~2, ~0x2c, ~1), "6,I,d", 0, v9 },
-{ "movl",      F3(2, 0x2c, 0)|FCC(1)|MCOND(FCONDL,0), MCOND(~FCONDL,~0)|FCC(~1)|F3(~2, ~0x2c, ~0), "7,2,d", 0, v9 },
-{ "movl",      F3(2, 0x2c, 1)|FCC(1)|MCOND(FCONDL,0), MCOND(~FCONDL,~0)|FCC(~1)|F3(~2, ~0x2c, ~1), "7,I,d", 0, v9 },
-{ "movl",      F3(2, 0x2c, 0)|FCC(2)|MCOND(FCONDL,0), MCOND(~FCONDL,~0)|FCC(~2)|F3(~2, ~0x2c, ~0), "8,2,d", 0, v9 },
-{ "movl",      F3(2, 0x2c, 1)|FCC(2)|MCOND(FCONDL,0), MCOND(~FCONDL,~0)|FCC(~2)|F3(~2, ~0x2c, ~1), "8,I,d", 0, v9 },
-{ "movl",      F3(2, 0x2c, 0)|FCC(3)|MCOND(FCONDL,0), MCOND(~FCONDL,~0)|FCC(~3)|F3(~2, ~0x2c, ~0), "9,2,d", 0, v9 },
-{ "movl",      F3(2, 0x2c, 1)|FCC(3)|MCOND(FCONDL,0), MCOND(~FCONDL,~0)|FCC(~3)|F3(~2, ~0x2c, ~1), "9,I,d", 0, v9 },
-{ "movl",      F3(2, 0x2c, 0)|MCOND(CONDL,1)|ICC, F3(~2, ~0x2c, ~0)|MCOND(~CONDL,~1)|XCC|(1<<12), "z,2,d", 0, v9 },
-{ "movl",      F3(2, 0x2c, 1)|MCOND(CONDL,1)|ICC, F3(~2, ~0x2c, ~1)|MCOND(~CONDL,~1)|XCC|(1<<12), "z,I,d", 0, v9 },
-{ "movl",      F3(2, 0x2c, 0)|MCOND(CONDL,1)|XCC, F3(~2, ~0x2c, ~0)|MCOND(~CONDL,~1)|(1<<12), "Z,2,d", 0, v9 },
-{ "movl",      F3(2, 0x2c, 1)|MCOND(CONDL,1)|XCC, F3(~2, ~0x2c, ~1)|MCOND(~CONDL,~1)|(1<<12), "Z,I,d", 0, v9 },
-{ "movle",     F3(2, 0x2c, 0)|FCC(0)|MCOND(FCONDLE,0), MCOND(~FCONDLE,~0)|FCC(~0)|F3(~2, ~0x2c, ~0), "6,2,d", 0, v9 },
-{ "movle",     F3(2, 0x2c, 1)|FCC(0)|MCOND(FCONDLE,0), MCOND(~FCONDLE,~0)|FCC(~0)|F3(~2, ~0x2c, ~1), "6,I,d", 0, v9 },
-{ "movle",     F3(2, 0x2c, 0)|FCC(1)|MCOND(FCONDLE,0), MCOND(~FCONDLE,~0)|FCC(~1)|F3(~2, ~0x2c, ~0), "7,2,d", 0, v9 },
-{ "movle",     F3(2, 0x2c, 1)|FCC(1)|MCOND(FCONDLE,0), MCOND(~FCONDLE,~0)|FCC(~1)|F3(~2, ~0x2c, ~1), "7,I,d", 0, v9 },
-{ "movle",     F3(2, 0x2c, 0)|FCC(2)|MCOND(FCONDLE,0), MCOND(~FCONDLE,~0)|FCC(~2)|F3(~2, ~0x2c, ~0), "8,2,d", 0, v9 },
-{ "movle",     F3(2, 0x2c, 1)|FCC(2)|MCOND(FCONDLE,0), MCOND(~FCONDLE,~0)|FCC(~2)|F3(~2, ~0x2c, ~1), "8,I,d", 0, v9 },
-{ "movle",     F3(2, 0x2c, 0)|FCC(3)|MCOND(FCONDLE,0), MCOND(~FCONDLE,~0)|FCC(~3)|F3(~2, ~0x2c, ~0), "9,2,d", 0, v9 },
-{ "movle",     F3(2, 0x2c, 1)|FCC(3)|MCOND(FCONDLE,0), MCOND(~FCONDLE,~0)|FCC(~3)|F3(~2, ~0x2c, ~1), "9,I,d", 0, v9 },
-{ "movle",     F3(2, 0x2c, 0)|MCOND(CONDLE,1)|ICC, F3(~2, ~0x2c, ~0)|MCOND(~CONDLE,~1)|XCC|(1<<12), "z,2,d", 0, v9 },
-{ "movle",     F3(2, 0x2c, 1)|MCOND(CONDLE,1)|ICC, F3(~2, ~0x2c, ~1)|MCOND(~CONDLE,~1)|XCC|(1<<12), "z,I,d", 0, v9 },
-{ "movle",     F3(2, 0x2c, 0)|MCOND(CONDLE,1)|XCC, F3(~2, ~0x2c, ~0)|MCOND(~CONDLE,~1)|(1<<12), "Z,2,d", 0, v9 },
-{ "movle",     F3(2, 0x2c, 1)|MCOND(CONDLE,1)|XCC, F3(~2, ~0x2c, ~1)|MCOND(~CONDLE,~1)|(1<<12), "Z,I,d", 0, v9 },
-{ "movleu",    F3(2, 0x2c, 0)|MCOND(CONDLEU,1)|ICC, F3(~2, ~0x2c, ~0)|MCOND(~CONDLEU,~1)|XCC|(1<<12), "z,2,d", 0, v9 },
-{ "movleu",    F3(2, 0x2c, 1)|MCOND(CONDLEU,1)|ICC, F3(~2, ~0x2c, ~1)|MCOND(~CONDLEU,~1)|XCC|(1<<12), "z,I,d", 0, v9 },
-{ "movleu",    F3(2, 0x2c, 0)|MCOND(CONDLEU,1)|XCC, F3(~2, ~0x2c, ~0)|MCOND(~CONDLEU,~1)|(1<<12), "Z,2,d", 0, v9 },
-{ "movleu",    F3(2, 0x2c, 1)|MCOND(CONDLEU,1)|XCC, F3(~2, ~0x2c, ~1)|MCOND(~CONDLEU,~1)|(1<<12), "Z,I,d", 0, v9 },
-{ "movlg",     F3(2, 0x2c, 0)|FCC(0)|MCOND(FCONDLG,0), MCOND(~FCONDLG,~0)|FCC(~0)|F3(~2, ~0x2c, ~0), "6,2,d", 0, v9 },
-{ "movlg",     F3(2, 0x2c, 1)|FCC(0)|MCOND(FCONDLG,0), MCOND(~FCONDLG,~0)|FCC(~0)|F3(~2, ~0x2c, ~1), "6,I,d", 0, v9 },
-{ "movlg",     F3(2, 0x2c, 0)|FCC(1)|MCOND(FCONDLG,0), MCOND(~FCONDLG,~0)|FCC(~1)|F3(~2, ~0x2c, ~0), "7,2,d", 0, v9 },
-{ "movlg",     F3(2, 0x2c, 1)|FCC(1)|MCOND(FCONDLG,0), MCOND(~FCONDLG,~0)|FCC(~1)|F3(~2, ~0x2c, ~1), "7,I,d", 0, v9 },
-{ "movlg",     F3(2, 0x2c, 0)|FCC(2)|MCOND(FCONDLG,0), MCOND(~FCONDLG,~0)|FCC(~2)|F3(~2, ~0x2c, ~0), "8,2,d", 0, v9 },
-{ "movlg",     F3(2, 0x2c, 1)|FCC(2)|MCOND(FCONDLG,0), MCOND(~FCONDLG,~0)|FCC(~2)|F3(~2, ~0x2c, ~1), "8,I,d", 0, v9 },
-{ "movlg",     F3(2, 0x2c, 0)|FCC(3)|MCOND(FCONDLG,0), MCOND(~FCONDLG,~0)|FCC(~3)|F3(~2, ~0x2c, ~0), "9,2,d", 0, v9 },
-{ "movlg",     F3(2, 0x2c, 1)|FCC(3)|MCOND(FCONDLG,0), MCOND(~FCONDLG,~0)|FCC(~3)|F3(~2, ~0x2c, ~1), "9,I,d", 0, v9 },
-{ "movn",      F3(2, 0x2c, 0)|FCC(0)|MCOND(FCONDN,0), MCOND(~FCONDN,~0)|FCC(~0)|F3(~2, ~0x2c, ~0), "6,2,d", 0, v9 },
-{ "movn",      F3(2, 0x2c, 1)|FCC(0)|MCOND(FCONDN,0), MCOND(~FCONDN,~0)|FCC(~0)|F3(~2, ~0x2c, ~1), "6,I,d", 0, v9 },
-{ "movn",      F3(2, 0x2c, 0)|FCC(1)|MCOND(FCONDN,0), MCOND(~FCONDN,~0)|FCC(~1)|F3(~2, ~0x2c, ~0), "7,2,d", 0, v9 },
-{ "movn",      F3(2, 0x2c, 1)|FCC(1)|MCOND(FCONDN,0), MCOND(~FCONDN,~0)|FCC(~1)|F3(~2, ~0x2c, ~1), "7,I,d", 0, v9 },
-{ "movn",      F3(2, 0x2c, 0)|FCC(2)|MCOND(FCONDN,0), MCOND(~FCONDN,~0)|FCC(~2)|F3(~2, ~0x2c, ~0), "8,2,d", 0, v9 },
-{ "movn",      F3(2, 0x2c, 1)|FCC(2)|MCOND(FCONDN,0), MCOND(~FCONDN,~0)|FCC(~2)|F3(~2, ~0x2c, ~1), "8,I,d", 0, v9 },
-{ "movn",      F3(2, 0x2c, 0)|FCC(3)|MCOND(FCONDN,0), MCOND(~FCONDN,~0)|FCC(~3)|F3(~2, ~0x2c, ~0), "9,2,d", 0, v9 },
-{ "movn",      F3(2, 0x2c, 1)|FCC(3)|MCOND(FCONDN,0), MCOND(~FCONDN,~0)|FCC(~3)|F3(~2, ~0x2c, ~1), "9,I,d", 0, v9 },
-{ "movn",      F3(2, 0x2c, 0)|MCOND(CONDN,1)|ICC, F3(~2, ~0x2c, ~0)|MCOND(~CONDN,~1)|XCC|(1<<12), "z,2,d", 0, v9 },
-{ "movn",      F3(2, 0x2c, 1)|MCOND(CONDN,1)|ICC, F3(~2, ~0x2c, ~1)|MCOND(~CONDN,~1)|XCC|(1<<12), "z,I,d", 0, v9 },
-{ "movn",      F3(2, 0x2c, 0)|MCOND(CONDN,1)|XCC, F3(~2, ~0x2c, ~0)|MCOND(~CONDN,~1)|(1<<12), "Z,2,d", 0, v9 },
-{ "movn",      F3(2, 0x2c, 1)|MCOND(CONDN,1)|XCC, F3(~2, ~0x2c, ~1)|MCOND(~CONDN,~1)|(1<<12), "Z,I,d", 0, v9 },
-{ "movne",     F3(2, 0x2c, 0)|FCC(0)|MCOND(FCONDNE,0), MCOND(~FCONDNE,~0)|FCC(~0)|F3(~2, ~0x2c, ~0), "6,2,d", 0, v9 },
-{ "movne",     F3(2, 0x2c, 1)|FCC(0)|MCOND(FCONDNE,0), MCOND(~FCONDNE,~0)|FCC(~0)|F3(~2, ~0x2c, ~1), "6,I,d", 0, v9 },
-{ "movne",     F3(2, 0x2c, 0)|FCC(1)|MCOND(FCONDNE,0), MCOND(~FCONDNE,~0)|FCC(~1)|F3(~2, ~0x2c, ~0), "7,2,d", 0, v9 },
-{ "movne",     F3(2, 0x2c, 1)|FCC(1)|MCOND(FCONDNE,0), MCOND(~FCONDNE,~0)|FCC(~1)|F3(~2, ~0x2c, ~1), "7,I,d", 0, v9 },
-{ "movne",     F3(2, 0x2c, 0)|FCC(2)|MCOND(FCONDNE,0), MCOND(~FCONDNE,~0)|FCC(~2)|F3(~2, ~0x2c, ~0), "8,2,d", 0, v9 },
-{ "movne",     F3(2, 0x2c, 1)|FCC(2)|MCOND(FCONDNE,0), MCOND(~FCONDNE,~0)|FCC(~2)|F3(~2, ~0x2c, ~1), "8,I,d", 0, v9 },
-{ "movne",     F3(2, 0x2c, 0)|FCC(3)|MCOND(FCONDNE,0), MCOND(~FCONDNE,~0)|FCC(~3)|F3(~2, ~0x2c, ~0), "9,2,d", 0, v9 },
-{ "movne",     F3(2, 0x2c, 1)|FCC(3)|MCOND(FCONDNE,0), MCOND(~FCONDNE,~0)|FCC(~3)|F3(~2, ~0x2c, ~1), "9,I,d", 0, v9 },
-{ "movne",     F3(2, 0x2c, 0)|MCOND(CONDNE,1)|ICC, F3(~2, ~0x2c, ~0)|MCOND(~CONDNE,~1)|XCC|(1<<12), "z,2,d", 0, v9 },
-{ "movne",     F3(2, 0x2c, 1)|MCOND(CONDNE,1)|ICC, F3(~2, ~0x2c, ~1)|MCOND(~CONDNE,~1)|XCC|(1<<12), "z,I,d", 0, v9 },
-{ "movne",     F3(2, 0x2c, 0)|MCOND(CONDNE,1)|XCC, F3(~2, ~0x2c, ~0)|MCOND(~CONDNE,~1)|(1<<12), "Z,2,d", 0, v9 },
-{ "movne",     F3(2, 0x2c, 1)|MCOND(CONDNE,1)|XCC, F3(~2, ~0x2c, ~1)|MCOND(~CONDNE,~1)|(1<<12), "Z,I,d", 0, v9 },
-{ "movneg",    F3(2, 0x2c, 0)|MCOND(CONDNEG,1)|ICC, F3(~2, ~0x2c, ~0)|MCOND(~CONDNEG,~1)|XCC|(1<<12), "z,2,d", 0, v9 },
-{ "movneg",    F3(2, 0x2c, 1)|MCOND(CONDNEG,1)|ICC, F3(~2, ~0x2c, ~1)|MCOND(~CONDNEG,~1)|XCC|(1<<12), "z,I,d", 0, v9 },
-{ "movneg",    F3(2, 0x2c, 0)|MCOND(CONDNEG,1)|XCC, F3(~2, ~0x2c, ~0)|MCOND(~CONDNEG,~1)|(1<<12), "Z,2,d", 0, v9 },
-{ "movneg",    F3(2, 0x2c, 1)|MCOND(CONDNEG,1)|XCC, F3(~2, ~0x2c, ~1)|MCOND(~CONDNEG,~1)|(1<<12), "Z,I,d", 0, v9 },
-{ "movnz",     F3(2, 0x2c, 0)|FCC(0)|MCOND(FCONDNZ,0), MCOND(~FCONDNZ,~0)|FCC(~0)|F3(~2, ~0x2c, ~0), "6,2,d", F_ALIAS, v9 },
-{ "movnz",     F3(2, 0x2c, 1)|FCC(0)|MCOND(FCONDNZ,0), MCOND(~FCONDNZ,~0)|FCC(~0)|F3(~2, ~0x2c, ~1), "6,I,d", F_ALIAS, v9 },
-{ "movnz",     F3(2, 0x2c, 0)|FCC(1)|MCOND(FCONDNZ,0), MCOND(~FCONDNZ,~0)|FCC(~1)|F3(~2, ~0x2c, ~0), "7,2,d", F_ALIAS, v9 },
-{ "movnz",     F3(2, 0x2c, 1)|FCC(1)|MCOND(FCONDNZ,0), MCOND(~FCONDNZ,~0)|FCC(~1)|F3(~2, ~0x2c, ~1), "7,I,d", F_ALIAS, v9 },
-{ "movnz",     F3(2, 0x2c, 0)|FCC(2)|MCOND(FCONDNZ,0), MCOND(~FCONDNZ,~0)|FCC(~2)|F3(~2, ~0x2c, ~0), "8,2,d", F_ALIAS, v9 },
-{ "movnz",     F3(2, 0x2c, 1)|FCC(2)|MCOND(FCONDNZ,0), MCOND(~FCONDNZ,~0)|FCC(~2)|F3(~2, ~0x2c, ~1), "8,I,d", F_ALIAS, v9 },
-{ "movnz",     F3(2, 0x2c, 0)|FCC(3)|MCOND(FCONDNZ,0), MCOND(~FCONDNZ,~0)|FCC(~3)|F3(~2, ~0x2c, ~0), "9,2,d", F_ALIAS, v9 },
-{ "movnz",     F3(2, 0x2c, 1)|FCC(3)|MCOND(FCONDNZ,0), MCOND(~FCONDNZ,~0)|FCC(~3)|F3(~2, ~0x2c, ~1), "9,I,d", F_ALIAS, v9 },
-{ "movnz",     F3(2, 0x2c, 0)|MCOND(CONDNZ,1)|ICC, F3(~2, ~0x2c, ~0)|MCOND(~CONDNZ,~1)|XCC|(1<<12), "z,2,d", F_ALIAS, v9 },
-{ "movnz",     F3(2, 0x2c, 1)|MCOND(CONDNZ,1)|ICC, F3(~2, ~0x2c, ~1)|MCOND(~CONDNZ,~1)|XCC|(1<<12), "z,I,d", F_ALIAS, v9 },
-{ "movnz",     F3(2, 0x2c, 0)|MCOND(CONDNZ,1)|XCC, F3(~2, ~0x2c, ~0)|MCOND(~CONDNZ,~1)|(1<<12), "Z,2,d", F_ALIAS, v9 },
-{ "movnz",     F3(2, 0x2c, 1)|MCOND(CONDNZ,1)|XCC, F3(~2, ~0x2c, ~1)|MCOND(~CONDNZ,~1)|(1<<12), "Z,I,d", F_ALIAS, v9 },
-{ "movo",      F3(2, 0x2c, 0)|FCC(0)|MCOND(FCONDO,0), MCOND(~FCONDO,~0)|FCC(~0)|F3(~2, ~0x2c, ~0), "6,2,d", 0, v9 },
-{ "movo",      F3(2, 0x2c, 1)|FCC(0)|MCOND(FCONDO,0), MCOND(~FCONDO,~0)|FCC(~0)|F3(~2, ~0x2c, ~1), "6,I,d", 0, v9 },
-{ "movo",      F3(2, 0x2c, 0)|FCC(1)|MCOND(FCONDO,0), MCOND(~FCONDO,~0)|FCC(~1)|F3(~2, ~0x2c, ~0), "7,2,d", 0, v9 },
-{ "movo",      F3(2, 0x2c, 1)|FCC(1)|MCOND(FCONDO,0), MCOND(~FCONDO,~0)|FCC(~1)|F3(~2, ~0x2c, ~1), "7,I,d", 0, v9 },
-{ "movo",      F3(2, 0x2c, 0)|FCC(2)|MCOND(FCONDO,0), MCOND(~FCONDO,~0)|FCC(~2)|F3(~2, ~0x2c, ~0), "8,2,d", 0, v9 },
-{ "movo",      F3(2, 0x2c, 1)|FCC(2)|MCOND(FCONDO,0), MCOND(~FCONDO,~0)|FCC(~2)|F3(~2, ~0x2c, ~1), "8,I,d", 0, v9 },
-{ "movo",      F3(2, 0x2c, 0)|FCC(3)|MCOND(FCONDO,0), MCOND(~FCONDO,~0)|FCC(~3)|F3(~2, ~0x2c, ~0), "9,2,d", 0, v9 },
-{ "movo",      F3(2, 0x2c, 1)|FCC(3)|MCOND(FCONDO,0), MCOND(~FCONDO,~0)|FCC(~3)|F3(~2, ~0x2c, ~1), "9,I,d", 0, v9 },
-{ "movpos",    F3(2, 0x2c, 0)|MCOND(CONDPOS,1)|ICC, F3(~2, ~0x2c, ~0)|MCOND(~CONDPOS,~1)|XCC|(1<<12), "z,2,d", 0, v9 },
-{ "movpos",    F3(2, 0x2c, 1)|MCOND(CONDPOS,1)|ICC, F3(~2, ~0x2c, ~1)|MCOND(~CONDPOS,~1)|XCC|(1<<12), "z,I,d", 0, v9 },
-{ "movpos",    F3(2, 0x2c, 0)|MCOND(CONDPOS,1)|XCC, F3(~2, ~0x2c, ~0)|MCOND(~CONDPOS,~1)|(1<<12), "Z,2,d", 0, v9 },
-{ "movpos",    F3(2, 0x2c, 1)|MCOND(CONDPOS,1)|XCC, F3(~2, ~0x2c, ~1)|MCOND(~CONDPOS,~1)|(1<<12), "Z,I,d", 0, v9 },
-{ "movu",      F3(2, 0x2c, 0)|FCC(0)|MCOND(FCONDU,0), MCOND(~FCONDU,~0)|FCC(~0)|F3(~2, ~0x2c, ~0), "6,2,d", 0, v9 },
-{ "movu",      F3(2, 0x2c, 1)|FCC(0)|MCOND(FCONDU,0), MCOND(~FCONDU,~0)|FCC(~0)|F3(~2, ~0x2c, ~1), "6,I,d", 0, v9 },
-{ "movu",      F3(2, 0x2c, 0)|FCC(1)|MCOND(FCONDU,0), MCOND(~FCONDU,~0)|FCC(~1)|F3(~2, ~0x2c, ~0), "7,2,d", 0, v9 },
-{ "movu",      F3(2, 0x2c, 1)|FCC(1)|MCOND(FCONDU,0), MCOND(~FCONDU,~0)|FCC(~1)|F3(~2, ~0x2c, ~1), "7,I,d", 0, v9 },
-{ "movu",      F3(2, 0x2c, 0)|FCC(2)|MCOND(FCONDU,0), MCOND(~FCONDU,~0)|FCC(~2)|F3(~2, ~0x2c, ~0), "8,2,d", 0, v9 },
-{ "movu",      F3(2, 0x2c, 1)|FCC(2)|MCOND(FCONDU,0), MCOND(~FCONDU,~0)|FCC(~2)|F3(~2, ~0x2c, ~1), "8,I,d", 0, v9 },
-{ "movu",      F3(2, 0x2c, 0)|FCC(3)|MCOND(FCONDU,0), MCOND(~FCONDU,~0)|FCC(~3)|F3(~2, ~0x2c, ~0), "9,2,d", 0, v9 },
-{ "movu",      F3(2, 0x2c, 1)|FCC(3)|MCOND(FCONDU,0), MCOND(~FCONDU,~0)|FCC(~3)|F3(~2, ~0x2c, ~1), "9,I,d", 0, v9 },
-{ "movue",     F3(2, 0x2c, 0)|FCC(0)|MCOND(FCONDUE,0), MCOND(~FCONDUE,~0)|FCC(~0)|F3(~2, ~0x2c, ~0), "6,2,d", 0, v9 },
-{ "movue",     F3(2, 0x2c, 1)|FCC(0)|MCOND(FCONDUE,0), MCOND(~FCONDUE,~0)|FCC(~0)|F3(~2, ~0x2c, ~1), "6,I,d", 0, v9 },
-{ "movue",     F3(2, 0x2c, 0)|FCC(1)|MCOND(FCONDUE,0), MCOND(~FCONDUE,~0)|FCC(~1)|F3(~2, ~0x2c, ~0), "7,2,d", 0, v9 },
-{ "movue",     F3(2, 0x2c, 1)|FCC(1)|MCOND(FCONDUE,0), MCOND(~FCONDUE,~0)|FCC(~1)|F3(~2, ~0x2c, ~1), "7,I,d", 0, v9 },
-{ "movue",     F3(2, 0x2c, 0)|FCC(2)|MCOND(FCONDUE,0), MCOND(~FCONDUE,~0)|FCC(~2)|F3(~2, ~0x2c, ~0), "8,2,d", 0, v9 },
-{ "movue",     F3(2, 0x2c, 1)|FCC(2)|MCOND(FCONDUE,0), MCOND(~FCONDUE,~0)|FCC(~2)|F3(~2, ~0x2c, ~1), "8,I,d", 0, v9 },
-{ "movue",     F3(2, 0x2c, 0)|FCC(3)|MCOND(FCONDUE,0), MCOND(~FCONDUE,~0)|FCC(~3)|F3(~2, ~0x2c, ~0), "9,2,d", 0, v9 },
-{ "movue",     F3(2, 0x2c, 1)|FCC(3)|MCOND(FCONDUE,0), MCOND(~FCONDUE,~0)|FCC(~3)|F3(~2, ~0x2c, ~1), "9,I,d", 0, v9 },
-{ "movug",     F3(2, 0x2c, 0)|FCC(0)|MCOND(FCONDUG,0), MCOND(~FCONDUG,~0)|FCC(~0)|F3(~2, ~0x2c, ~0), "6,2,d", 0, v9 },
-{ "movug",     F3(2, 0x2c, 1)|FCC(0)|MCOND(FCONDUG,0), MCOND(~FCONDUG,~0)|FCC(~0)|F3(~2, ~0x2c, ~1), "6,I,d", 0, v9 },
-{ "movug",     F3(2, 0x2c, 0)|FCC(1)|MCOND(FCONDUG,0), MCOND(~FCONDUG,~0)|FCC(~1)|F3(~2, ~0x2c, ~0), "7,2,d", 0, v9 },
-{ "movug",     F3(2, 0x2c, 1)|FCC(1)|MCOND(FCONDUG,0), MCOND(~FCONDUG,~0)|FCC(~1)|F3(~2, ~0x2c, ~1), "7,I,d", 0, v9 },
-{ "movug",     F3(2, 0x2c, 0)|FCC(2)|MCOND(FCONDUG,0), MCOND(~FCONDUG,~0)|FCC(~2)|F3(~2, ~0x2c, ~0), "8,2,d", 0, v9 },
-{ "movug",     F3(2, 0x2c, 1)|FCC(2)|MCOND(FCONDUG,0), MCOND(~FCONDUG,~0)|FCC(~2)|F3(~2, ~0x2c, ~1), "8,I,d", 0, v9 },
-{ "movug",     F3(2, 0x2c, 0)|FCC(3)|MCOND(FCONDUG,0), MCOND(~FCONDUG,~0)|FCC(~3)|F3(~2, ~0x2c, ~0), "9,2,d", 0, v9 },
-{ "movug",     F3(2, 0x2c, 1)|FCC(3)|MCOND(FCONDUG,0), MCOND(~FCONDUG,~0)|FCC(~3)|F3(~2, ~0x2c, ~1), "9,I,d", 0, v9 },
-{ "movuge",    F3(2, 0x2c, 0)|FCC(0)|MCOND(FCONDUGE,0), MCOND(~FCONDUGE,~0)|FCC(~0)|F3(~2, ~0x2c, ~0), "6,2,d", 0, v9 },
-{ "movuge",    F3(2, 0x2c, 1)|FCC(0)|MCOND(FCONDUGE,0), MCOND(~FCONDUGE,~0)|FCC(~0)|F3(~2, ~0x2c, ~1), "6,I,d", 0, v9 },
-{ "movuge",    F3(2, 0x2c, 0)|FCC(1)|MCOND(FCONDUGE,0), MCOND(~FCONDUGE,~0)|FCC(~1)|F3(~2, ~0x2c, ~0), "7,2,d", 0, v9 },
-{ "movuge",    F3(2, 0x2c, 1)|FCC(1)|MCOND(FCONDUGE,0), MCOND(~FCONDUGE,~0)|FCC(~1)|F3(~2, ~0x2c, ~1), "7,I,d", 0, v9 },
-{ "movuge",    F3(2, 0x2c, 0)|FCC(2)|MCOND(FCONDUGE,0), MCOND(~FCONDUGE,~0)|FCC(~2)|F3(~2, ~0x2c, ~0), "8,2,d", 0, v9 },
-{ "movuge",    F3(2, 0x2c, 1)|FCC(2)|MCOND(FCONDUGE,0), MCOND(~FCONDUGE,~0)|FCC(~2)|F3(~2, ~0x2c, ~1), "8,I,d", 0, v9 },
-{ "movuge",    F3(2, 0x2c, 0)|FCC(3)|MCOND(FCONDUGE,0), MCOND(~FCONDUGE,~0)|FCC(~3)|F3(~2, ~0x2c, ~0), "9,2,d", 0, v9 },
-{ "movuge",    F3(2, 0x2c, 1)|FCC(3)|MCOND(FCONDUGE,0), MCOND(~FCONDUGE,~0)|FCC(~3)|F3(~2, ~0x2c, ~1), "9,I,d", 0, v9 },
-{ "movul",     F3(2, 0x2c, 0)|FCC(0)|MCOND(FCONDUL,0), MCOND(~FCONDUL,~0)|FCC(~0)|F3(~2, ~0x2c, ~0), "6,2,d", 0, v9 },
-{ "movul",     F3(2, 0x2c, 1)|FCC(0)|MCOND(FCONDUL,0), MCOND(~FCONDUL,~0)|FCC(~0)|F3(~2, ~0x2c, ~1), "6,I,d", 0, v9 },
-{ "movul",     F3(2, 0x2c, 0)|FCC(1)|MCOND(FCONDUL,0), MCOND(~FCONDUL,~0)|FCC(~1)|F3(~2, ~0x2c, ~0), "7,2,d", 0, v9 },
-{ "movul",     F3(2, 0x2c, 1)|FCC(1)|MCOND(FCONDUL,0), MCOND(~FCONDUL,~0)|FCC(~1)|F3(~2, ~0x2c, ~1), "7,I,d", 0, v9 },
-{ "movul",     F3(2, 0x2c, 0)|FCC(2)|MCOND(FCONDUL,0), MCOND(~FCONDUL,~0)|FCC(~2)|F3(~2, ~0x2c, ~0), "8,2,d", 0, v9 },
-{ "movul",     F3(2, 0x2c, 1)|FCC(2)|MCOND(FCONDUL,0), MCOND(~FCONDUL,~0)|FCC(~2)|F3(~2, ~0x2c, ~1), "8,I,d", 0, v9 },
-{ "movul",     F3(2, 0x2c, 0)|FCC(3)|MCOND(FCONDUL,0), MCOND(~FCONDUL,~0)|FCC(~3)|F3(~2, ~0x2c, ~0), "9,2,d", 0, v9 },
-{ "movul",     F3(2, 0x2c, 1)|FCC(3)|MCOND(FCONDUL,0), MCOND(~FCONDUL,~0)|FCC(~3)|F3(~2, ~0x2c, ~1), "9,I,d", 0, v9 },
-{ "movule",    F3(2, 0x2c, 0)|FCC(0)|MCOND(FCONDULE,0), MCOND(~FCONDULE,~0)|FCC(~0)|F3(~2, ~0x2c, ~0), "6,2,d", 0, v9 },
-{ "movule",    F3(2, 0x2c, 1)|FCC(0)|MCOND(FCONDULE,0), MCOND(~FCONDULE,~0)|FCC(~0)|F3(~2, ~0x2c, ~1), "6,I,d", 0, v9 },
-{ "movule",    F3(2, 0x2c, 0)|FCC(1)|MCOND(FCONDULE,0), MCOND(~FCONDULE,~0)|FCC(~1)|F3(~2, ~0x2c, ~0), "7,2,d", 0, v9 },
-{ "movule",    F3(2, 0x2c, 1)|FCC(1)|MCOND(FCONDULE,0), MCOND(~FCONDULE,~0)|FCC(~1)|F3(~2, ~0x2c, ~1), "7,I,d", 0, v9 },
-{ "movule",    F3(2, 0x2c, 0)|FCC(2)|MCOND(FCONDULE,0), MCOND(~FCONDULE,~0)|FCC(~2)|F3(~2, ~0x2c, ~0), "8,2,d", 0, v9 },
-{ "movule",    F3(2, 0x2c, 1)|FCC(2)|MCOND(FCONDULE,0), MCOND(~FCONDULE,~0)|FCC(~2)|F3(~2, ~0x2c, ~1), "8,I,d", 0, v9 },
-{ "movule",    F3(2, 0x2c, 0)|FCC(3)|MCOND(FCONDULE,0), MCOND(~FCONDULE,~0)|FCC(~3)|F3(~2, ~0x2c, ~0), "9,2,d", 0, v9 },
-{ "movule",    F3(2, 0x2c, 1)|FCC(3)|MCOND(FCONDULE,0), MCOND(~FCONDULE,~0)|FCC(~3)|F3(~2, ~0x2c, ~1), "9,I,d", 0, v9 },
-{ "movvc",     F3(2, 0x2c, 0)|MCOND(CONDVC,1)|ICC, F3(~2, ~0x2c, ~0)|MCOND(~CONDVC,~1)|XCC|(1<<12), "z,2,d", 0, v9 },
-{ "movvc",     F3(2, 0x2c, 1)|MCOND(CONDVC,1)|ICC, F3(~2, ~0x2c, ~1)|MCOND(~CONDVC,~1)|XCC|(1<<12), "z,I,d", 0, v9 },
-{ "movvc",     F3(2, 0x2c, 0)|MCOND(CONDVC,1)|XCC, F3(~2, ~0x2c, ~0)|MCOND(~CONDVC,~1)|(1<<12), "Z,2,d", 0, v9 },
-{ "movvc",     F3(2, 0x2c, 1)|MCOND(CONDVC,1)|XCC, F3(~2, ~0x2c, ~1)|MCOND(~CONDVC,~1)|(1<<12), "Z,I,d", 0, v9 },
-{ "movvs",     F3(2, 0x2c, 0)|MCOND(CONDVS,1)|ICC, F3(~2, ~0x2c, ~0)|MCOND(~CONDVS,~1)|XCC|(1<<12), "z,2,d", 0, v9 },
-{ "movvs",     F3(2, 0x2c, 1)|MCOND(CONDVS,1)|ICC, F3(~2, ~0x2c, ~1)|MCOND(~CONDVS,~1)|XCC|(1<<12), "z,I,d", 0, v9 },
-{ "movvs",     F3(2, 0x2c, 0)|MCOND(CONDVS,1)|XCC, F3(~2, ~0x2c, ~0)|MCOND(~CONDVS,~1)|(1<<12), "Z,2,d", 0, v9 },
-{ "movvs",     F3(2, 0x2c, 1)|MCOND(CONDVS,1)|XCC, F3(~2, ~0x2c, ~1)|MCOND(~CONDVS,~1)|(1<<12), "Z,I,d", 0, v9 },
-{ "movz",      F3(2, 0x2c, 0)|FCC(0)|MCOND(FCONDZ,0), MCOND(~FCONDZ,~0)|FCC(~0)|F3(~2, ~0x2c, ~0), "6,2,d", F_ALIAS, v9 },
-{ "movz",      F3(2, 0x2c, 1)|FCC(0)|MCOND(FCONDZ,0), MCOND(~FCONDZ,~0)|FCC(~0)|F3(~2, ~0x2c, ~1), "6,I,d", F_ALIAS, v9 },
-{ "movz",      F3(2, 0x2c, 0)|FCC(1)|MCOND(FCONDZ,0), MCOND(~FCONDZ,~0)|FCC(~1)|F3(~2, ~0x2c, ~0), "7,2,d", F_ALIAS, v9 },
-{ "movz",      F3(2, 0x2c, 1)|FCC(1)|MCOND(FCONDZ,0), MCOND(~FCONDZ,~0)|FCC(~1)|F3(~2, ~0x2c, ~1), "7,I,d", F_ALIAS, v9 },
-{ "movz",      F3(2, 0x2c, 0)|FCC(2)|MCOND(FCONDZ,0), MCOND(~FCONDZ,~0)|FCC(~2)|F3(~2, ~0x2c, ~0), "8,2,d", F_ALIAS, v9 },
-{ "movz",      F3(2, 0x2c, 1)|FCC(2)|MCOND(FCONDZ,0), MCOND(~FCONDZ,~0)|FCC(~2)|F3(~2, ~0x2c, ~1), "8,I,d", F_ALIAS, v9 },
-{ "movz",      F3(2, 0x2c, 0)|FCC(3)|MCOND(FCONDZ,0), MCOND(~FCONDZ,~0)|FCC(~3)|F3(~2, ~0x2c, ~0), "9,2,d", F_ALIAS, v9 },
-{ "movz",      F3(2, 0x2c, 1)|FCC(3)|MCOND(FCONDZ,0), MCOND(~FCONDZ,~0)|FCC(~3)|F3(~2, ~0x2c, ~1), "9,I,d", F_ALIAS, v9 },
-{ "movz",      F3(2, 0x2c, 0)|MCOND(CONDZ,1)|ICC, F3(~2, ~0x2c, ~0)|MCOND(~CONDZ,~1)|XCC|(1<<12), "z,2,d", F_ALIAS, v9 },
-{ "movz",      F3(2, 0x2c, 1)|MCOND(CONDZ,1)|ICC, F3(~2, ~0x2c, ~1)|MCOND(~CONDZ,~1)|XCC|(1<<12), "z,I,d", F_ALIAS, v9 },
-{ "movz",      F3(2, 0x2c, 0)|MCOND(CONDZ,1)|XCC, F3(~2, ~0x2c, ~0)|MCOND(~CONDZ,~1)|(1<<12), "Z,2,d", F_ALIAS, v9 },
-{ "movz",      F3(2, 0x2c, 1)|MCOND(CONDZ,1)|XCC, F3(~2, ~0x2c, ~1)|MCOND(~CONDZ,~1)|(1<<12), "Z,I,d", F_ALIAS, v9 },
-
-{ "fmovda",    F3F(2, 0x35, 0x102)|MCOND(CONDA,0),  F3F(~2, ~0x35, ~0x102)|MCOND(~CONDA,~0),   "z,f,g", 0, v9 },
-{ "fmovda",    F3F(2, 0x35, 0x082)|MCOND(FCONDA,0), F3F(~2, ~0x35, ~0x082)|MCOND(~FCONDA,~0),  "6,f,g", 0, v9 },
-{ "fmovda",    F3F(2, 0x35, 0x182)|MCOND(CONDA,0),  F3F(~2, ~0x35, ~0x182)|MCOND(~CONDA,~0),   "Z,f,g", 0, v9 },
-{ "fmovda",    F3F(2, 0x35, 0x0a2)|MCOND(FCONDA,0), F3F(~2, ~0x35, ~0x0a2)|MCOND(~FCONDA,~0),  "7,f,g", 0, v9 },
-{ "fmovda",    F3F(2, 0x35, 0x0c2)|MCOND(FCONDA,0), F3F(~2, ~0x35, ~0x0c2)|MCOND(~FCONDA,~0),  "8,f,g", 0, v9 },
-{ "fmovda",    F3F(2, 0x35, 0x0e2)|MCOND(FCONDA,0), F3F(~2, ~0x35, ~0x0e2)|MCOND(~FCONDA,~0),  "9,f,g", 0, v9 },
-{ "fmovqa",    F3F(2, 0x35, 0x103)|MCOND(CONDA,0),  F3F(~2, ~0x35, ~0x103)|MCOND(~CONDA,~0),   "z,f,g", 0, v9 },
-{ "fmovqa",    F3F(2, 0x35, 0x083)|MCOND(FCONDA,0), F3F(~2, ~0x35, ~0x083)|MCOND(~FCONDA,~0),  "6,f,g", 0, v9 },
-{ "fmovqa",    F3F(2, 0x35, 0x183)|MCOND(CONDA,0),  F3F(~2, ~0x35, ~0x183)|MCOND(~CONDA,~0),   "Z,f,g", 0, v9 },
-{ "fmovqa",    F3F(2, 0x35, 0x0a3)|MCOND(FCONDA,0), F3F(~2, ~0x35, ~0x0a3)|MCOND(~FCONDA,~0),  "7,f,g", 0, v9 },
-{ "fmovqa",    F3F(2, 0x35, 0x0c3)|MCOND(FCONDA,0), F3F(~2, ~0x35, ~0x0c3)|MCOND(~FCONDA,~0),  "8,f,g", 0, v9 },
-{ "fmovqa",    F3F(2, 0x35, 0x0e3)|MCOND(FCONDA,0), F3F(~2, ~0x35, ~0x0e3)|MCOND(~FCONDA,~0),  "9,f,g", 0, v9 },
-{ "fmovsa",    F3F(2, 0x35, 0x101)|MCOND(CONDA,0),  F3F(~2, ~0x35, ~0x101)|MCOND(~CONDA,~0),   "z,f,g", 0, v9 },
-{ "fmovsa",    F3F(2, 0x35, 0x081)|MCOND(FCONDA,0), F3F(~2, ~0x35, ~0x081)|MCOND(~FCONDA,~0),  "6,f,g", 0, v9 },
-{ "fmovsa",    F3F(2, 0x35, 0x181)|MCOND(CONDA,0),  F3F(~2, ~0x35, ~0x181)|MCOND(~CONDA,~0),   "Z,f,g", 0, v9 },
-{ "fmovsa",    F3F(2, 0x35, 0x0a1)|MCOND(FCONDA,0), F3F(~2, ~0x35, ~0x0a1)|MCOND(~FCONDA,~0),  "7,f,g", 0, v9 },
-{ "fmovsa",    F3F(2, 0x35, 0x0c1)|MCOND(FCONDA,0), F3F(~2, ~0x35, ~0x0c1)|MCOND(~FCONDA,~0),  "8,f,g", 0, v9 },
-{ "fmovsa",    F3F(2, 0x35, 0x0e1)|MCOND(FCONDA,0), F3F(~2, ~0x35, ~0x0e1)|MCOND(~FCONDA,~0),  "9,f,g", 0, v9 },
-{ "fmovdcc",   F3F(2, 0x35, 0x102)|MCOND(CONDCC,0), F3F(~2, ~0x35, ~0x102)|MCOND(~CONDCC,~0),  "z,f,g", 0, v9 },
-{ "fmovdcc",   F3F(2, 0x35, 0x182)|MCOND(CONDCC,0), F3F(~2, ~0x35, ~0x182)|MCOND(~CONDCC,~0),  "Z,f,g", 0, v9 },
-{ "fmovqcc",   F3F(2, 0x35, 0x103)|MCOND(CONDCC,0), F3F(~2, ~0x35, ~0x103)|MCOND(~CONDCC,~0),  "z,f,g", 0, v9 },
-{ "fmovqcc",   F3F(2, 0x35, 0x183)|MCOND(CONDCC,0), F3F(~2, ~0x35, ~0x183)|MCOND(~CONDCC,~0),  "Z,f,g", 0, v9 },
-{ "fmovscc",   F3F(2, 0x35, 0x101)|MCOND(CONDCC,0), F3F(~2, ~0x35, ~0x101)|MCOND(~CONDCC,~0),  "z,f,g", 0, v9 },
-{ "fmovscc",   F3F(2, 0x35, 0x181)|MCOND(CONDCC,0), F3F(~2, ~0x35, ~0x181)|MCOND(~CONDCC,~0),  "Z,f,g", 0, v9 },
-{ "fmovdcs",   F3F(2, 0x35, 0x102)|MCOND(CONDCS,0), F3F(~2, ~0x35, ~0x102)|MCOND(~CONDCS,~0),  "z,f,g", 0, v9 },
-{ "fmovdcs",   F3F(2, 0x35, 0x182)|MCOND(CONDCS,0), F3F(~2, ~0x35, ~0x182)|MCOND(~CONDCS,~0),  "Z,f,g", 0, v9 },
-{ "fmovqcs",   F3F(2, 0x35, 0x103)|MCOND(CONDCS,0), F3F(~2, ~0x35, ~0x103)|MCOND(~CONDCS,~0),  "z,f,g", 0, v9 },
-{ "fmovqcs",   F3F(2, 0x35, 0x183)|MCOND(CONDCS,0), F3F(~2, ~0x35, ~0x183)|MCOND(~CONDCS,~0),  "Z,f,g", 0, v9 },
-{ "fmovscs",   F3F(2, 0x35, 0x101)|MCOND(CONDCS,0), F3F(~2, ~0x35, ~0x101)|MCOND(~CONDCS,~0),  "z,f,g", 0, v9 },
-{ "fmovscs",   F3F(2, 0x35, 0x181)|MCOND(CONDCS,0), F3F(~2, ~0x35, ~0x181)|MCOND(~CONDCS,~0),  "Z,f,g", 0, v9 },
-{ "fmovde",    F3F(2, 0x35, 0x102)|MCOND(CONDE,0),  F3F(~2, ~0x35, ~0x102)|MCOND(~CONDE,~0),   "z,f,g", 0, v9 },
-{ "fmovde",    F3F(2, 0x35, 0x082)|MCOND(FCONDE,0), F3F(~2, ~0x35, ~0x082)|MCOND(~FCONDE,~0),  "6,f,g", 0, v9 },
-{ "fmovde",    F3F(2, 0x35, 0x182)|MCOND(CONDE,0),  F3F(~2, ~0x35, ~0x182)|MCOND(~CONDE,~0),   "Z,f,g", 0, v9 },
-{ "fmovde",    F3F(2, 0x35, 0x0a2)|MCOND(FCONDE,0), F3F(~2, ~0x35, ~0x0a2)|MCOND(~FCONDE,~0),  "7,f,g", 0, v9 },
-{ "fmovde",    F3F(2, 0x35, 0x0c2)|MCOND(FCONDE,0), F3F(~2, ~0x35, ~0x0c2)|MCOND(~FCONDE,~0),  "8,f,g", 0, v9 },
-{ "fmovde",    F3F(2, 0x35, 0x0e2)|MCOND(FCONDE,0), F3F(~2, ~0x35, ~0x0e2)|MCOND(~FCONDE,~0),  "9,f,g", 0, v9 },
-{ "fmovqe",    F3F(2, 0x35, 0x103)|MCOND(CONDE,0),  F3F(~2, ~0x35, ~0x103)|MCOND(~CONDE,~0),   "z,f,g", 0, v9 },
-{ "fmovqe",    F3F(2, 0x35, 0x083)|MCOND(FCONDE,0), F3F(~2, ~0x35, ~0x083)|MCOND(~FCONDE,~0),  "6,f,g", 0, v9 },
-{ "fmovqe",    F3F(2, 0x35, 0x183)|MCOND(CONDE,0),  F3F(~2, ~0x35, ~0x183)|MCOND(~CONDE,~0),   "Z,f,g", 0, v9 },
-{ "fmovqe",    F3F(2, 0x35, 0x0a3)|MCOND(FCONDE,0), F3F(~2, ~0x35, ~0x0a3)|MCOND(~FCONDE,~0),  "7,f,g", 0, v9 },
-{ "fmovqe",    F3F(2, 0x35, 0x0c3)|MCOND(FCONDE,0), F3F(~2, ~0x35, ~0x0c3)|MCOND(~FCONDE,~0),  "8,f,g", 0, v9 },
-{ "fmovqe",    F3F(2, 0x35, 0x0e3)|MCOND(FCONDE,0), F3F(~2, ~0x35, ~0x0e3)|MCOND(~FCONDE,~0),  "9,f,g", 0, v9 },
-{ "fmovse",    F3F(2, 0x35, 0x101)|MCOND(CONDE,0),  F3F(~2, ~0x35, ~0x101)|MCOND(~CONDE,~0),   "z,f,g", 0, v9 },
-{ "fmovse",    F3F(2, 0x35, 0x081)|MCOND(FCONDE,0), F3F(~2, ~0x35, ~0x081)|MCOND(~FCONDE,~0),  "6,f,g", 0, v9 },
-{ "fmovse",    F3F(2, 0x35, 0x181)|MCOND(CONDE,0),  F3F(~2, ~0x35, ~0x181)|MCOND(~CONDE,~0),   "Z,f,g", 0, v9 },
-{ "fmovse",    F3F(2, 0x35, 0x0a1)|MCOND(FCONDE,0), F3F(~2, ~0x35, ~0x0a1)|MCOND(~FCONDE,~0),  "7,f,g", 0, v9 },
-{ "fmovse",    F3F(2, 0x35, 0x0c1)|MCOND(FCONDE,0), F3F(~2, ~0x35, ~0x0c1)|MCOND(~FCONDE,~0),  "8,f,g", 0, v9 },
-{ "fmovse",    F3F(2, 0x35, 0x0e1)|MCOND(FCONDE,0), F3F(~2, ~0x35, ~0x0e1)|MCOND(~FCONDE,~0),  "9,f,g", 0, v9 },
-{ "fmovdg",    F3F(2, 0x35, 0x102)|MCOND(CONDG,0),  F3F(~2, ~0x35, ~0x102)|MCOND(~CONDG,~0),   "z,f,g", 0, v9 },
-{ "fmovdg",    F3F(2, 0x35, 0x082)|MCOND(FCONDG,0), F3F(~2, ~0x35, ~0x082)|MCOND(~FCONDG,~0),  "6,f,g", 0, v9 },
-{ "fmovdg",    F3F(2, 0x35, 0x182)|MCOND(CONDG,0),  F3F(~2, ~0x35, ~0x182)|MCOND(~CONDG,~0),   "Z,f,g", 0, v9 },
-{ "fmovdg",    F3F(2, 0x35, 0x0a2)|MCOND(FCONDG,0), F3F(~2, ~0x35, ~0x0a2)|MCOND(~FCONDG,~0),  "7,f,g", 0, v9 },
-{ "fmovdg",    F3F(2, 0x35, 0x0c2)|MCOND(FCONDG,0), F3F(~2, ~0x35, ~0x0c2)|MCOND(~FCONDG,~0),  "8,f,g", 0, v9 },
-{ "fmovdg",    F3F(2, 0x35, 0x0e2)|MCOND(FCONDG,0), F3F(~2, ~0x35, ~0x0e2)|MCOND(~FCONDG,~0),  "9,f,g", 0, v9 },
-{ "fmovqg",    F3F(2, 0x35, 0x103)|MCOND(CONDG,0),  F3F(~2, ~0x35, ~0x103)|MCOND(~CONDG,~0),   "z,f,g", 0, v9 },
-{ "fmovqg",    F3F(2, 0x35, 0x083)|MCOND(FCONDG,0), F3F(~2, ~0x35, ~0x083)|MCOND(~FCONDG,~0),  "6,f,g", 0, v9 },
-{ "fmovqg",    F3F(2, 0x35, 0x183)|MCOND(CONDG,0),  F3F(~2, ~0x35, ~0x183)|MCOND(~CONDG,~0),   "Z,f,g", 0, v9 },
-{ "fmovqg",    F3F(2, 0x35, 0x0a3)|MCOND(FCONDG,0), F3F(~2, ~0x35, ~0x0a3)|MCOND(~FCONDG,~0),  "7,f,g", 0, v9 },
-{ "fmovqg",    F3F(2, 0x35, 0x0c3)|MCOND(FCONDG,0), F3F(~2, ~0x35, ~0x0c3)|MCOND(~FCONDG,~0),  "8,f,g", 0, v9 },
-{ "fmovqg",    F3F(2, 0x35, 0x0e3)|MCOND(FCONDG,0), F3F(~2, ~0x35, ~0x0e3)|MCOND(~FCONDG,~0),  "9,f,g", 0, v9 },
-{ "fmovsg",    F3F(2, 0x35, 0x101)|MCOND(CONDG,0),  F3F(~2, ~0x35, ~0x101)|MCOND(~CONDG,~0),   "z,f,g", 0, v9 },
-{ "fmovsg",    F3F(2, 0x35, 0x081)|MCOND(FCONDG,0), F3F(~2, ~0x35, ~0x081)|MCOND(~FCONDG,~0),  "6,f,g", 0, v9 },
-{ "fmovsg",    F3F(2, 0x35, 0x181)|MCOND(CONDG,0),  F3F(~2, ~0x35, ~0x181)|MCOND(~CONDG,~0),   "Z,f,g", 0, v9 },
-{ "fmovsg",    F3F(2, 0x35, 0x0a1)|MCOND(FCONDG,0), F3F(~2, ~0x35, ~0x0a1)|MCOND(~FCONDG,~0),  "7,f,g", 0, v9 },
-{ "fmovsg",    F3F(2, 0x35, 0x0c1)|MCOND(FCONDG,0), F3F(~2, ~0x35, ~0x0c1)|MCOND(~FCONDG,~0),  "8,f,g", 0, v9 },
-{ "fmovsg",    F3F(2, 0x35, 0x0e1)|MCOND(FCONDG,0), F3F(~2, ~0x35, ~0x0e1)|MCOND(~FCONDG,~0),  "9,f,g", 0, v9 },
-{ "fmovdge",   F3F(2, 0x35, 0x102)|MCOND(CONDGE,0), F3F(~2, ~0x35, ~0x102)|MCOND(~CONDGE,~0),  "z,f,g", 0, v9 },
-{ "fmovdge",   F3F(2, 0x35, 0x082)|MCOND(FCONDGE,0), F3F(~2, ~0x35, ~0x082)|MCOND(~FCONDGE,~0),        "6,f,g", 0, v9 },
-{ "fmovdge",   F3F(2, 0x35, 0x182)|MCOND(CONDGE,0), F3F(~2, ~0x35, ~0x182)|MCOND(~CONDGE,~0),  "Z,f,g", 0, v9 },
-{ "fmovdge",   F3F(2, 0x35, 0x0a2)|MCOND(FCONDGE,0), F3F(~2, ~0x35, ~0x0a2)|MCOND(~FCONDGE,~0),        "7,f,g", 0, v9 },
-{ "fmovdge",   F3F(2, 0x35, 0x0c2)|MCOND(FCONDGE,0), F3F(~2, ~0x35, ~0x0c2)|MCOND(~FCONDGE,~0),        "8,f,g", 0, v9 },
-{ "fmovdge",   F3F(2, 0x35, 0x0e2)|MCOND(FCONDGE,0), F3F(~2, ~0x35, ~0x0e2)|MCOND(~FCONDGE,~0),        "9,f,g", 0, v9 },
-{ "fmovqge",   F3F(2, 0x35, 0x103)|MCOND(CONDGE,0), F3F(~2, ~0x35, ~0x103)|MCOND(~CONDGE,~0),  "z,f,g", 0, v9 },
-{ "fmovqge",   F3F(2, 0x35, 0x083)|MCOND(FCONDGE,0), F3F(~2, ~0x35, ~0x083)|MCOND(~FCONDGE,~0),        "6,f,g", 0, v9 },
-{ "fmovqge",   F3F(2, 0x35, 0x183)|MCOND(CONDGE,0), F3F(~2, ~0x35, ~0x183)|MCOND(~CONDGE,~0),  "Z,f,g", 0, v9 },
-{ "fmovqge",   F3F(2, 0x35, 0x0a3)|MCOND(FCONDGE,0), F3F(~2, ~0x35, ~0x0a3)|MCOND(~FCONDGE,~0),        "7,f,g", 0, v9 },
-{ "fmovqge",   F3F(2, 0x35, 0x0c3)|MCOND(FCONDGE,0), F3F(~2, ~0x35, ~0x0c3)|MCOND(~FCONDGE,~0),        "8,f,g", 0, v9 },
-{ "fmovqge",   F3F(2, 0x35, 0x0e3)|MCOND(FCONDGE,0), F3F(~2, ~0x35, ~0x0e3)|MCOND(~FCONDGE,~0),        "9,f,g", 0, v9 },
-{ "fmovsge",   F3F(2, 0x35, 0x101)|MCOND(CONDGE,0), F3F(~2, ~0x35, ~0x101)|MCOND(~CONDGE,~0),  "z,f,g", 0, v9 },
-{ "fmovsge",   F3F(2, 0x35, 0x081)|MCOND(FCONDGE,0), F3F(~2, ~0x35, ~0x081)|MCOND(~FCONDGE,~0),        "6,f,g", 0, v9 },
-{ "fmovsge",   F3F(2, 0x35, 0x181)|MCOND(CONDGE,0), F3F(~2, ~0x35, ~0x181)|MCOND(~CONDGE,~0),  "Z,f,g", 0, v9 },
-{ "fmovsge",   F3F(2, 0x35, 0x0a1)|MCOND(FCONDGE,0), F3F(~2, ~0x35, ~0x0a1)|MCOND(~FCONDGE,~0),        "7,f,g", 0, v9 },
-{ "fmovsge",   F3F(2, 0x35, 0x0c1)|MCOND(FCONDGE,0), F3F(~2, ~0x35, ~0x0c1)|MCOND(~FCONDGE,~0),        "8,f,g", 0, v9 },
-{ "fmovsge",   F3F(2, 0x35, 0x0e1)|MCOND(FCONDGE,0), F3F(~2, ~0x35, ~0x0e1)|MCOND(~FCONDGE,~0),        "9,f,g", 0, v9 },
-{ "fmovdgeu",  F3F(2, 0x35, 0x102)|MCOND(CONDGEU,0), F3F(~2, ~0x35, ~0x102)|MCOND(~CONDGEU,~0),        "z,f,g", F_ALIAS, v9 },
-{ "fmovdgeu",  F3F(2, 0x35, 0x182)|MCOND(CONDGEU,0), F3F(~2, ~0x35, ~0x182)|MCOND(~CONDGEU,~0),        "Z,f,g", F_ALIAS, v9 },
-{ "fmovqgeu",  F3F(2, 0x35, 0x103)|MCOND(CONDGEU,0), F3F(~2, ~0x35, ~0x103)|MCOND(~CONDGEU,~0),        "z,f,g", F_ALIAS, v9 },
-{ "fmovqgeu",  F3F(2, 0x35, 0x183)|MCOND(CONDGEU,0), F3F(~2, ~0x35, ~0x183)|MCOND(~CONDGEU,~0),        "Z,f,g", F_ALIAS, v9 },
-{ "fmovsgeu",  F3F(2, 0x35, 0x101)|MCOND(CONDGEU,0), F3F(~2, ~0x35, ~0x101)|MCOND(~CONDGEU,~0),        "z,f,g", F_ALIAS, v9 },
-{ "fmovsgeu",  F3F(2, 0x35, 0x181)|MCOND(CONDGEU,0), F3F(~2, ~0x35, ~0x181)|MCOND(~CONDGEU,~0),        "Z,f,g", F_ALIAS, v9 },
-{ "fmovdgu",   F3F(2, 0x35, 0x102)|MCOND(CONDGU,0), F3F(~2, ~0x35, ~0x102)|MCOND(~CONDGU,~0),  "z,f,g", 0, v9 },
-{ "fmovdgu",   F3F(2, 0x35, 0x182)|MCOND(CONDGU,0), F3F(~2, ~0x35, ~0x182)|MCOND(~CONDGU,~0),  "Z,f,g", 0, v9 },
-{ "fmovqgu",   F3F(2, 0x35, 0x103)|MCOND(CONDGU,0), F3F(~2, ~0x35, ~0x103)|MCOND(~CONDGU,~0),  "z,f,g", 0, v9 },
-{ "fmovqgu",   F3F(2, 0x35, 0x183)|MCOND(CONDGU,0), F3F(~2, ~0x35, ~0x183)|MCOND(~CONDGU,~0),  "Z,f,g", 0, v9 },
-{ "fmovsgu",   F3F(2, 0x35, 0x101)|MCOND(CONDGU,0), F3F(~2, ~0x35, ~0x101)|MCOND(~CONDGU,~0),  "z,f,g", 0, v9 },
-{ "fmovsgu",   F3F(2, 0x35, 0x181)|MCOND(CONDGU,0), F3F(~2, ~0x35, ~0x181)|MCOND(~CONDGU,~0),  "Z,f,g", 0, v9 },
-{ "fmovdl",    F3F(2, 0x35, 0x102)|MCOND(CONDL,0),  F3F(~2, ~0x35, ~0x102)|MCOND(~CONDL,~0),   "z,f,g", 0, v9 },
-{ "fmovdl",    F3F(2, 0x35, 0x082)|MCOND(FCONDL,0), F3F(~2, ~0x35, ~0x082)|MCOND(~FCONDL,~0),  "6,f,g", 0, v9 },
-{ "fmovdl",    F3F(2, 0x35, 0x182)|MCOND(CONDL,0),  F3F(~2, ~0x35, ~0x182)|MCOND(~CONDL,~0),   "Z,f,g", 0, v9 },
-{ "fmovdl",    F3F(2, 0x35, 0x0a2)|MCOND(FCONDL,0), F3F(~2, ~0x35, ~0x0a2)|MCOND(~FCONDL,~0),  "7,f,g", 0, v9 },
-{ "fmovdl",    F3F(2, 0x35, 0x0c2)|MCOND(FCONDL,0), F3F(~2, ~0x35, ~0x0c2)|MCOND(~FCONDL,~0),  "8,f,g", 0, v9 },
-{ "fmovdl",    F3F(2, 0x35, 0x0e2)|MCOND(FCONDL,0), F3F(~2, ~0x35, ~0x0e2)|MCOND(~FCONDL,~0),  "9,f,g", 0, v9 },
-{ "fmovql",    F3F(2, 0x35, 0x103)|MCOND(CONDL,0),  F3F(~2, ~0x35, ~0x103)|MCOND(~CONDL,~0),   "z,f,g", 0, v9 },
-{ "fmovql",    F3F(2, 0x35, 0x083)|MCOND(FCONDL,0), F3F(~2, ~0x35, ~0x083)|MCOND(~FCONDL,~0),  "6,f,g", 0, v9 },
-{ "fmovql",    F3F(2, 0x35, 0x183)|MCOND(CONDL,0),  F3F(~2, ~0x35, ~0x183)|MCOND(~CONDL,~0),   "Z,f,g", 0, v9 },
-{ "fmovql",    F3F(2, 0x35, 0x0a3)|MCOND(FCONDL,0), F3F(~2, ~0x35, ~0x0a3)|MCOND(~FCONDL,~0),  "7,f,g", 0, v9 },
-{ "fmovql",    F3F(2, 0x35, 0x0c3)|MCOND(FCONDL,0), F3F(~2, ~0x35, ~0x0c3)|MCOND(~FCONDL,~0),  "8,f,g", 0, v9 },
-{ "fmovql",    F3F(2, 0x35, 0x0e3)|MCOND(FCONDL,0), F3F(~2, ~0x35, ~0x0e3)|MCOND(~FCONDL,~0),  "9,f,g", 0, v9 },
-{ "fmovsl",    F3F(2, 0x35, 0x101)|MCOND(CONDL,0),  F3F(~2, ~0x35, ~0x101)|MCOND(~CONDL,~0),   "z,f,g", 0, v9 },
-{ "fmovsl",    F3F(2, 0x35, 0x081)|MCOND(FCONDL,0), F3F(~2, ~0x35, ~0x081)|MCOND(~FCONDL,~0),  "6,f,g", 0, v9 },
-{ "fmovsl",    F3F(2, 0x35, 0x181)|MCOND(CONDL,0),  F3F(~2, ~0x35, ~0x181)|MCOND(~CONDL,~0),   "Z,f,g", 0, v9 },
-{ "fmovsl",    F3F(2, 0x35, 0x0a1)|MCOND(FCONDL,0), F3F(~2, ~0x35, ~0x0a1)|MCOND(~FCONDL,~0),  "7,f,g", 0, v9 },
-{ "fmovsl",    F3F(2, 0x35, 0x0c1)|MCOND(FCONDL,0), F3F(~2, ~0x35, ~0x0c1)|MCOND(~FCONDL,~0),  "8,f,g", 0, v9 },
-{ "fmovsl",    F3F(2, 0x35, 0x0e1)|MCOND(FCONDL,0), F3F(~2, ~0x35, ~0x0e1)|MCOND(~FCONDL,~0),  "9,f,g", 0, v9 },
-{ "fmovdle",   F3F(2, 0x35, 0x102)|MCOND(CONDLE,0), F3F(~2, ~0x35, ~0x102)|MCOND(~CONDLE,~0),  "z,f,g", 0, v9 },
-{ "fmovdle",   F3F(2, 0x35, 0x082)|MCOND(FCONDLE,0), F3F(~2, ~0x35, ~0x082)|MCOND(~FCONDLE,~0),        "6,f,g", 0, v9 },
-{ "fmovdle",   F3F(2, 0x35, 0x182)|MCOND(CONDLE,0), F3F(~2, ~0x35, ~0x182)|MCOND(~CONDLE,~0),  "Z,f,g", 0, v9 },
-{ "fmovdle",   F3F(2, 0x35, 0x0a2)|MCOND(FCONDLE,0), F3F(~2, ~0x35, ~0x0a2)|MCOND(~FCONDLE,~0),        "7,f,g", 0, v9 },
-{ "fmovdle",   F3F(2, 0x35, 0x0c2)|MCOND(FCONDLE,0), F3F(~2, ~0x35, ~0x0c2)|MCOND(~FCONDLE,~0),        "8,f,g", 0, v9 },
-{ "fmovdle",   F3F(2, 0x35, 0x0e2)|MCOND(FCONDLE,0), F3F(~2, ~0x35, ~0x0e2)|MCOND(~FCONDLE,~0),        "9,f,g", 0, v9 },
-{ "fmovqle",   F3F(2, 0x35, 0x103)|MCOND(CONDLE,0), F3F(~2, ~0x35, ~0x103)|MCOND(~CONDLE,~0),  "z,f,g", 0, v9 },
-{ "fmovqle",   F3F(2, 0x35, 0x083)|MCOND(FCONDLE,0), F3F(~2, ~0x35, ~0x083)|MCOND(~FCONDLE,~0),        "6,f,g", 0, v9 },
-{ "fmovqle",   F3F(2, 0x35, 0x183)|MCOND(CONDLE,0), F3F(~2, ~0x35, ~0x183)|MCOND(~CONDLE,~0),  "Z,f,g", 0, v9 },
-{ "fmovqle",   F3F(2, 0x35, 0x0a3)|MCOND(FCONDLE,0), F3F(~2, ~0x35, ~0x0a3)|MCOND(~FCONDLE,~0),        "7,f,g", 0, v9 },
-{ "fmovqle",   F3F(2, 0x35, 0x0c3)|MCOND(FCONDLE,0), F3F(~2, ~0x35, ~0x0c3)|MCOND(~FCONDLE,~0),        "8,f,g", 0, v9 },
-{ "fmovqle",   F3F(2, 0x35, 0x0e3)|MCOND(FCONDLE,0), F3F(~2, ~0x35, ~0x0e3)|MCOND(~FCONDLE,~0),        "9,f,g", 0, v9 },
-{ "fmovsle",   F3F(2, 0x35, 0x101)|MCOND(CONDLE,0), F3F(~2, ~0x35, ~0x101)|MCOND(~CONDLE,~0),  "z,f,g", 0, v9 },
-{ "fmovsle",   F3F(2, 0x35, 0x081)|MCOND(FCONDLE,0), F3F(~2, ~0x35, ~0x081)|MCOND(~FCONDLE,~0),        "6,f,g", 0, v9 },
-{ "fmovsle",   F3F(2, 0x35, 0x181)|MCOND(CONDLE,0), F3F(~2, ~0x35, ~0x181)|MCOND(~CONDLE,~0),  "Z,f,g", 0, v9 },
-{ "fmovsle",   F3F(2, 0x35, 0x0a1)|MCOND(FCONDLE,0), F3F(~2, ~0x35, ~0x0a1)|MCOND(~FCONDLE,~0),        "7,f,g", 0, v9 },
-{ "fmovsle",   F3F(2, 0x35, 0x0c1)|MCOND(FCONDLE,0), F3F(~2, ~0x35, ~0x0c1)|MCOND(~FCONDLE,~0),        "8,f,g", 0, v9 },
-{ "fmovsle",   F3F(2, 0x35, 0x0e1)|MCOND(FCONDLE,0), F3F(~2, ~0x35, ~0x0e1)|MCOND(~FCONDLE,~0),        "9,f,g", 0, v9 },
-{ "fmovdleu",  F3F(2, 0x35, 0x102)|MCOND(CONDLEU,0), F3F(~2, ~0x35, ~0x102)|MCOND(~CONDLEU,~0),        "z,f,g", 0, v9 },
-{ "fmovdleu",  F3F(2, 0x35, 0x182)|MCOND(CONDLEU,0), F3F(~2, ~0x35, ~0x182)|MCOND(~CONDLEU,~0),        "Z,f,g", 0, v9 },
-{ "fmovqleu",  F3F(2, 0x35, 0x103)|MCOND(CONDLEU,0), F3F(~2, ~0x35, ~0x103)|MCOND(~CONDLEU,~0),        "z,f,g", 0, v9 },
-{ "fmovqleu",  F3F(2, 0x35, 0x183)|MCOND(CONDLEU,0), F3F(~2, ~0x35, ~0x183)|MCOND(~CONDLEU,~0),        "Z,f,g", 0, v9 },
-{ "fmovsleu",  F3F(2, 0x35, 0x101)|MCOND(CONDLEU,0), F3F(~2, ~0x35, ~0x101)|MCOND(~CONDLEU,~0),        "z,f,g", 0, v9 },
-{ "fmovsleu",  F3F(2, 0x35, 0x181)|MCOND(CONDLEU,0), F3F(~2, ~0x35, ~0x181)|MCOND(~CONDLEU,~0),        "Z,f,g", 0, v9 },
-{ "fmovdlg",   F3F(2, 0x35, 0x082)|MCOND(FCONDLG,0), F3F(~2, ~0x35, ~0x082)|MCOND(~FCONDLG,~0),        "6,f,g", 0, v9 },
-{ "fmovdlg",   F3F(2, 0x35, 0x0a2)|MCOND(FCONDLG,0), F3F(~2, ~0x35, ~0x0a2)|MCOND(~FCONDLG,~0),        "7,f,g", 0, v9 },
-{ "fmovdlg",   F3F(2, 0x35, 0x0c2)|MCOND(FCONDLG,0), F3F(~2, ~0x35, ~0x0c2)|MCOND(~FCONDLG,~0),        "8,f,g", 0, v9 },
-{ "fmovdlg",   F3F(2, 0x35, 0x0e2)|MCOND(FCONDLG,0), F3F(~2, ~0x35, ~0x0e2)|MCOND(~FCONDLG,~0),        "9,f,g", 0, v9 },
-{ "fmovqlg",   F3F(2, 0x35, 0x083)|MCOND(FCONDLG,0), F3F(~2, ~0x35, ~0x083)|MCOND(~FCONDLG,~0),        "6,f,g", 0, v9 },
-{ "fmovqlg",   F3F(2, 0x35, 0x0a3)|MCOND(FCONDLG,0), F3F(~2, ~0x35, ~0x0a3)|MCOND(~FCONDLG,~0),        "7,f,g", 0, v9 },
-{ "fmovqlg",   F3F(2, 0x35, 0x0c3)|MCOND(FCONDLG,0), F3F(~2, ~0x35, ~0x0c3)|MCOND(~FCONDLG,~0),        "8,f,g", 0, v9 },
-{ "fmovqlg",   F3F(2, 0x35, 0x0e3)|MCOND(FCONDLG,0), F3F(~2, ~0x35, ~0x0e3)|MCOND(~FCONDLG,~0),        "9,f,g", 0, v9 },
-{ "fmovslg",   F3F(2, 0x35, 0x081)|MCOND(FCONDLG,0), F3F(~2, ~0x35, ~0x081)|MCOND(~FCONDLG,~0),        "6,f,g", 0, v9 },
-{ "fmovslg",   F3F(2, 0x35, 0x0a1)|MCOND(FCONDLG,0), F3F(~2, ~0x35, ~0x0a1)|MCOND(~FCONDLG,~0),        "7,f,g", 0, v9 },
-{ "fmovslg",   F3F(2, 0x35, 0x0c1)|MCOND(FCONDLG,0), F3F(~2, ~0x35, ~0x0c1)|MCOND(~FCONDLG,~0),        "8,f,g", 0, v9 },
-{ "fmovslg",   F3F(2, 0x35, 0x0e1)|MCOND(FCONDLG,0), F3F(~2, ~0x35, ~0x0e1)|MCOND(~FCONDLG,~0),        "9,f,g", 0, v9 },
-{ "fmovdlu",   F3F(2, 0x35, 0x102)|MCOND(CONDLU,0), F3F(~2, ~0x35, ~0x102)|MCOND(~CONDLU,~0),  "z,f,g", F_ALIAS, v9 },
-{ "fmovdlu",   F3F(2, 0x35, 0x182)|MCOND(CONDLU,0), F3F(~2, ~0x35, ~0x182)|MCOND(~CONDLU,~0),  "Z,f,g", F_ALIAS, v9 },
-{ "fmovqlu",   F3F(2, 0x35, 0x103)|MCOND(CONDLU,0), F3F(~2, ~0x35, ~0x103)|MCOND(~CONDLU,~0),  "z,f,g", F_ALIAS, v9 },
-{ "fmovqlu",   F3F(2, 0x35, 0x183)|MCOND(CONDLU,0), F3F(~2, ~0x35, ~0x183)|MCOND(~CONDLU,~0),  "Z,f,g", F_ALIAS, v9 },
-{ "fmovslu",   F3F(2, 0x35, 0x101)|MCOND(CONDLU,0), F3F(~2, ~0x35, ~0x101)|MCOND(~CONDLU,~0),  "z,f,g", F_ALIAS, v9 },
-{ "fmovslu",   F3F(2, 0x35, 0x181)|MCOND(CONDLU,0), F3F(~2, ~0x35, ~0x181)|MCOND(~CONDLU,~0),  "Z,f,g", F_ALIAS, v9 },
-{ "fmovdn",    F3F(2, 0x35, 0x102)|MCOND(CONDN,0),  F3F(~2, ~0x35, ~0x102)|MCOND(~CONDN,~0),   "z,f,g", 0, v9 },
-{ "fmovdn",    F3F(2, 0x35, 0x082)|MCOND(FCONDN,0), F3F(~2, ~0x35, ~0x082)|MCOND(~FCONDN,~0),  "6,f,g", 0, v9 },
-{ "fmovdn",    F3F(2, 0x35, 0x182)|MCOND(CONDN,0),  F3F(~2, ~0x35, ~0x182)|MCOND(~CONDN,~0),   "Z,f,g", 0, v9 },
-{ "fmovdn",    F3F(2, 0x35, 0x0a2)|MCOND(FCONDN,0), F3F(~2, ~0x35, ~0x0a2)|MCOND(~FCONDN,~0),  "7,f,g", 0, v9 },
-{ "fmovdn",    F3F(2, 0x35, 0x0c2)|MCOND(FCONDN,0), F3F(~2, ~0x35, ~0x0c2)|MCOND(~FCONDN,~0),  "8,f,g", 0, v9 },
-{ "fmovdn",    F3F(2, 0x35, 0x0e2)|MCOND(FCONDN,0), F3F(~2, ~0x35, ~0x0e2)|MCOND(~FCONDN,~0),  "9,f,g", 0, v9 },
-{ "fmovqn",    F3F(2, 0x35, 0x103)|MCOND(CONDN,0),  F3F(~2, ~0x35, ~0x103)|MCOND(~CONDN,~0),   "z,f,g", 0, v9 },
-{ "fmovqn",    F3F(2, 0x35, 0x083)|MCOND(FCONDN,0), F3F(~2, ~0x35, ~0x083)|MCOND(~FCONDN,~0),  "6,f,g", 0, v9 },
-{ "fmovqn",    F3F(2, 0x35, 0x183)|MCOND(CONDN,0),  F3F(~2, ~0x35, ~0x183)|MCOND(~CONDN,~0),   "Z,f,g", 0, v9 },
-{ "fmovqn",    F3F(2, 0x35, 0x0a3)|MCOND(FCONDN,0), F3F(~2, ~0x35, ~0x0a3)|MCOND(~FCONDN,~0),  "7,f,g", 0, v9 },
-{ "fmovqn",    F3F(2, 0x35, 0x0c3)|MCOND(FCONDN,0), F3F(~2, ~0x35, ~0x0c3)|MCOND(~FCONDN,~0),  "8,f,g", 0, v9 },
-{ "fmovqn",    F3F(2, 0x35, 0x0e3)|MCOND(FCONDN,0), F3F(~2, ~0x35, ~0x0e3)|MCOND(~FCONDN,~0),  "9,f,g", 0, v9 },
-{ "fmovsn",    F3F(2, 0x35, 0x101)|MCOND(CONDN,0),  F3F(~2, ~0x35, ~0x101)|MCOND(~CONDN,~0),   "z,f,g", 0, v9 },
-{ "fmovsn",    F3F(2, 0x35, 0x081)|MCOND(FCONDN,0), F3F(~2, ~0x35, ~0x081)|MCOND(~FCONDN,~0),  "6,f,g", 0, v9 },
-{ "fmovsn",    F3F(2, 0x35, 0x181)|MCOND(CONDN,0),  F3F(~2, ~0x35, ~0x181)|MCOND(~CONDN,~0),   "Z,f,g", 0, v9 },
-{ "fmovsn",    F3F(2, 0x35, 0x0a1)|MCOND(FCONDN,0), F3F(~2, ~0x35, ~0x0a1)|MCOND(~FCONDN,~0),  "7,f,g", 0, v9 },
-{ "fmovsn",    F3F(2, 0x35, 0x0c1)|MCOND(FCONDN,0), F3F(~2, ~0x35, ~0x0c1)|MCOND(~FCONDN,~0),  "8,f,g", 0, v9 },
-{ "fmovsn",    F3F(2, 0x35, 0x0e1)|MCOND(FCONDN,0), F3F(~2, ~0x35, ~0x0e1)|MCOND(~FCONDN,~0),  "9,f,g", 0, v9 },
-{ "fmovdne",   F3F(2, 0x35, 0x102)|MCOND(CONDNE,0), F3F(~2, ~0x35, ~0x102)|MCOND(~CONDNE,~0),  "z,f,g", 0, v9 },
-{ "fmovdne",   F3F(2, 0x35, 0x082)|MCOND(FCONDNE,0), F3F(~2, ~0x35, ~0x082)|MCOND(~FCONDNE,~0),        "6,f,g", 0, v9 },
-{ "fmovdne",   F3F(2, 0x35, 0x182)|MCOND(CONDNE,0), F3F(~2, ~0x35, ~0x182)|MCOND(~CONDNE,~0),  "Z,f,g", 0, v9 },
-{ "fmovdne",   F3F(2, 0x35, 0x0a2)|MCOND(FCONDNE,0), F3F(~2, ~0x35, ~0x0a2)|MCOND(~FCONDNE,~0),        "7,f,g", 0, v9 },
-{ "fmovdne",   F3F(2, 0x35, 0x0c2)|MCOND(FCONDNE,0), F3F(~2, ~0x35, ~0x0c2)|MCOND(~FCONDNE,~0),        "8,f,g", 0, v9 },
-{ "fmovdne",   F3F(2, 0x35, 0x0e2)|MCOND(FCONDNE,0), F3F(~2, ~0x35, ~0x0e2)|MCOND(~FCONDNE,~0),        "9,f,g", 0, v9 },
-{ "fmovqne",   F3F(2, 0x35, 0x103)|MCOND(CONDNE,0),  F3F(~2, ~0x35, ~0x103)|MCOND(~CONDNE,~0), "z,f,g", 0, v9 },
-{ "fmovqne",   F3F(2, 0x35, 0x083)|MCOND(FCONDNE,0), F3F(~2, ~0x35, ~0x083)|MCOND(~FCONDNE,~0),        "6,f,g", 0, v9 },
-{ "fmovqne",   F3F(2, 0x35, 0x183)|MCOND(CONDNE,0),  F3F(~2, ~0x35, ~0x183)|MCOND(~CONDNE,~0), "Z,f,g", 0, v9 },
-{ "fmovqne",   F3F(2, 0x35, 0x0a3)|MCOND(FCONDNE,0), F3F(~2, ~0x35, ~0x0a3)|MCOND(~FCONDNE,~0),        "7,f,g", 0, v9 },
-{ "fmovqne",   F3F(2, 0x35, 0x0c3)|MCOND(FCONDNE,0), F3F(~2, ~0x35, ~0x0c3)|MCOND(~FCONDNE,~0),        "8,f,g", 0, v9 },
-{ "fmovqne",   F3F(2, 0x35, 0x0e3)|MCOND(FCONDNE,0), F3F(~2, ~0x35, ~0x0e3)|MCOND(~FCONDNE,~0),        "9,f,g", 0, v9 },
-{ "fmovsne",   F3F(2, 0x35, 0x101)|MCOND(CONDNE,0),  F3F(~2, ~0x35, ~0x101)|MCOND(~CONDNE,~0), "z,f,g", 0, v9 },
-{ "fmovsne",   F3F(2, 0x35, 0x081)|MCOND(FCONDNE,0), F3F(~2, ~0x35, ~0x081)|MCOND(~FCONDNE,~0),        "6,f,g", 0, v9 },
-{ "fmovsne",   F3F(2, 0x35, 0x181)|MCOND(CONDNE,0),  F3F(~2, ~0x35, ~0x181)|MCOND(~CONDNE,~0), "Z,f,g", 0, v9 },
-{ "fmovsne",   F3F(2, 0x35, 0x0a1)|MCOND(FCONDNE,0), F3F(~2, ~0x35, ~0x0a1)|MCOND(~FCONDNE,~0),        "7,f,g", 0, v9 },
-{ "fmovsne",   F3F(2, 0x35, 0x0c1)|MCOND(FCONDNE,0), F3F(~2, ~0x35, ~0x0c1)|MCOND(~FCONDNE,~0),        "8,f,g", 0, v9 },
-{ "fmovsne",   F3F(2, 0x35, 0x0e1)|MCOND(FCONDNE,0), F3F(~2, ~0x35, ~0x0e1)|MCOND(~FCONDNE,~0),        "9,f,g", 0, v9 },
-{ "fmovdneg",  F3F(2, 0x35, 0x102)|MCOND(CONDNEG,0), F3F(~2, ~0x35, ~0x102)|MCOND(~CONDNEG,~0),        "z,f,g", 0, v9 },
-{ "fmovdneg",  F3F(2, 0x35, 0x182)|MCOND(CONDNEG,0), F3F(~2, ~0x35, ~0x182)|MCOND(~CONDNEG,~0),        "Z,f,g", 0, v9 },
-{ "fmovqneg",  F3F(2, 0x35, 0x103)|MCOND(CONDNEG,0), F3F(~2, ~0x35, ~0x103)|MCOND(~CONDNEG,~0),        "z,f,g", 0, v9 },
-{ "fmovqneg",  F3F(2, 0x35, 0x183)|MCOND(CONDNEG,0), F3F(~2, ~0x35, ~0x183)|MCOND(~CONDNEG,~0),        "Z,f,g", 0, v9 },
-{ "fmovsneg",  F3F(2, 0x35, 0x101)|MCOND(CONDNEG,0), F3F(~2, ~0x35, ~0x101)|MCOND(~CONDNEG,~0),        "z,f,g", 0, v9 },
-{ "fmovsneg",  F3F(2, 0x35, 0x181)|MCOND(CONDNEG,0), F3F(~2, ~0x35, ~0x181)|MCOND(~CONDNEG,~0),        "Z,f,g", 0, v9 },
-{ "fmovdnz",   F3F(2, 0x35, 0x102)|MCOND(CONDNZ,0), F3F(~2, ~0x35, ~0x102)|MCOND(~CONDNZ,~0),  "z,f,g", F_ALIAS, v9 },
-{ "fmovdnz",   F3F(2, 0x35, 0x082)|MCOND(FCONDNZ,0), F3F(~2, ~0x35, ~0x082)|MCOND(~FCONDNZ,~0),        "6,f,g", F_ALIAS, v9 },
-{ "fmovdnz",   F3F(2, 0x35, 0x182)|MCOND(CONDNZ,0), F3F(~2, ~0x35, ~0x182)|MCOND(~CONDNZ,~0),  "Z,f,g", F_ALIAS, v9 },
-{ "fmovdnz",   F3F(2, 0x35, 0x0a2)|MCOND(FCONDNZ,0), F3F(~2, ~0x35, ~0x0a2)|MCOND(~FCONDNZ,~0),        "7,f,g", F_ALIAS, v9 },
-{ "fmovdnz",   F3F(2, 0x35, 0x0c2)|MCOND(FCONDNZ,0), F3F(~2, ~0x35, ~0x0c2)|MCOND(~FCONDNZ,~0),        "8,f,g", F_ALIAS, v9 },
-{ "fmovdnz",   F3F(2, 0x35, 0x0e2)|MCOND(FCONDNZ,0), F3F(~2, ~0x35, ~0x0e2)|MCOND(~FCONDNZ,~0),        "9,f,g", F_ALIAS, v9 },
-{ "fmovqnz",   F3F(2, 0x35, 0x103)|MCOND(CONDNZ,0), F3F(~2, ~0x35, ~0x103)|MCOND(~CONDNZ,~0),  "z,f,g", F_ALIAS, v9 },
-{ "fmovqnz",   F3F(2, 0x35, 0x083)|MCOND(FCONDNZ,0), F3F(~2, ~0x35, ~0x083)|MCOND(~FCONDNZ,~0),        "6,f,g", F_ALIAS, v9 },
-{ "fmovqnz",   F3F(2, 0x35, 0x183)|MCOND(CONDNZ,0), F3F(~2, ~0x35, ~0x183)|MCOND(~CONDNZ,~0),  "Z,f,g", F_ALIAS, v9 },
-{ "fmovqnz",   F3F(2, 0x35, 0x0a3)|MCOND(FCONDNZ,0), F3F(~2, ~0x35, ~0x0a3)|MCOND(~FCONDNZ,~0),        "7,f,g", F_ALIAS, v9 },
-{ "fmovqnz",   F3F(2, 0x35, 0x0c3)|MCOND(FCONDNZ,0), F3F(~2, ~0x35, ~0x0c3)|MCOND(~FCONDNZ,~0),        "8,f,g", F_ALIAS, v9 },
-{ "fmovqnz",   F3F(2, 0x35, 0x0e3)|MCOND(FCONDNZ,0), F3F(~2, ~0x35, ~0x0e3)|MCOND(~FCONDNZ,~0),        "9,f,g", F_ALIAS, v9 },
-{ "fmovsnz",   F3F(2, 0x35, 0x101)|MCOND(CONDNZ,0), F3F(~2, ~0x35, ~0x101)|MCOND(~CONDNZ,~0),  "z,f,g", F_ALIAS, v9 },
-{ "fmovsnz",   F3F(2, 0x35, 0x081)|MCOND(FCONDNZ,0), F3F(~2, ~0x35, ~0x081)|MCOND(~FCONDNZ,~0),        "6,f,g", F_ALIAS, v9 },
-{ "fmovsnz",   F3F(2, 0x35, 0x181)|MCOND(CONDNZ,0), F3F(~2, ~0x35, ~0x181)|MCOND(~CONDNZ,~0),  "Z,f,g", F_ALIAS, v9 },
-{ "fmovsnz",   F3F(2, 0x35, 0x0a1)|MCOND(FCONDNZ,0), F3F(~2, ~0x35, ~0x0a1)|MCOND(~FCONDNZ,~0),        "7,f,g", F_ALIAS, v9 },
-{ "fmovsnz",   F3F(2, 0x35, 0x0c1)|MCOND(FCONDNZ,0), F3F(~2, ~0x35, ~0x0c1)|MCOND(~FCONDNZ,~0),        "8,f,g", F_ALIAS, v9 },
-{ "fmovsnz",   F3F(2, 0x35, 0x0e1)|MCOND(FCONDNZ,0), F3F(~2, ~0x35, ~0x0e1)|MCOND(~FCONDNZ,~0),        "9,f,g", F_ALIAS, v9 },
-{ "fmovdo",    F3F(2, 0x35, 0x082)|MCOND(FCONDO,0), F3F(~2, ~0x35, ~0x082)|MCOND(~FCONDO,~0),  "6,f,g", 0, v9 },
-{ "fmovdo",    F3F(2, 0x35, 0x0a2)|MCOND(FCONDO,0), F3F(~2, ~0x35, ~0x0a2)|MCOND(~FCONDO,~0),  "7,f,g", 0, v9 },
-{ "fmovdo",    F3F(2, 0x35, 0x0c2)|MCOND(FCONDO,0), F3F(~2, ~0x35, ~0x0c2)|MCOND(~FCONDO,~0),  "8,f,g", 0, v9 },
-{ "fmovdo",    F3F(2, 0x35, 0x0e2)|MCOND(FCONDO,0), F3F(~2, ~0x35, ~0x0e2)|MCOND(~FCONDO,~0),  "9,f,g", 0, v9 },
-{ "fmovqo",    F3F(2, 0x35, 0x083)|MCOND(FCONDO,0), F3F(~2, ~0x35, ~0x083)|MCOND(~FCONDO,~0),  "6,f,g", 0, v9 },
-{ "fmovqo",    F3F(2, 0x35, 0x0a3)|MCOND(FCONDO,0), F3F(~2, ~0x35, ~0x0a3)|MCOND(~FCONDO,~0),  "7,f,g", 0, v9 },
-{ "fmovqo",    F3F(2, 0x35, 0x0c3)|MCOND(FCONDO,0), F3F(~2, ~0x35, ~0x0c3)|MCOND(~FCONDO,~0),  "8,f,g", 0, v9 },
-{ "fmovqo",    F3F(2, 0x35, 0x0e3)|MCOND(FCONDO,0), F3F(~2, ~0x35, ~0x0e3)|MCOND(~FCONDO,~0),  "9,f,g", 0, v9 },
-{ "fmovso",    F3F(2, 0x35, 0x081)|MCOND(FCONDO,0), F3F(~2, ~0x35, ~0x081)|MCOND(~FCONDO,~0),  "6,f,g", 0, v9 },
-{ "fmovso",    F3F(2, 0x35, 0x0a1)|MCOND(FCONDO,0), F3F(~2, ~0x35, ~0x0a1)|MCOND(~FCONDO,~0),  "7,f,g", 0, v9 },
-{ "fmovso",    F3F(2, 0x35, 0x0c1)|MCOND(FCONDO,0), F3F(~2, ~0x35, ~0x0c1)|MCOND(~FCONDO,~0),  "8,f,g", 0, v9 },
-{ "fmovso",    F3F(2, 0x35, 0x0e1)|MCOND(FCONDO,0), F3F(~2, ~0x35, ~0x0e1)|MCOND(~FCONDO,~0),  "9,f,g", 0, v9 },
-{ "fmovdpos",  F3F(2, 0x35, 0x102)|MCOND(CONDPOS,0), F3F(~2, ~0x35, ~0x102)|MCOND(~CONDPOS,~0),        "z,f,g", 0, v9 },
-{ "fmovdpos",  F3F(2, 0x35, 0x182)|MCOND(CONDPOS,0), F3F(~2, ~0x35, ~0x182)|MCOND(~CONDPOS,~0),        "Z,f,g", 0, v9 },
-{ "fmovqpos",  F3F(2, 0x35, 0x103)|MCOND(CONDPOS,0), F3F(~2, ~0x35, ~0x103)|MCOND(~CONDPOS,~0),        "z,f,g", 0, v9 },
-{ "fmovqpos",  F3F(2, 0x35, 0x183)|MCOND(CONDPOS,0), F3F(~2, ~0x35, ~0x183)|MCOND(~CONDPOS,~0),        "Z,f,g", 0, v9 },
-{ "fmovspos",  F3F(2, 0x35, 0x101)|MCOND(CONDPOS,0), F3F(~2, ~0x35, ~0x101)|MCOND(~CONDPOS,~0),        "z,f,g", 0, v9 },
-{ "fmovspos",  F3F(2, 0x35, 0x181)|MCOND(CONDPOS,0), F3F(~2, ~0x35, ~0x181)|MCOND(~CONDPOS,~0),        "Z,f,g", 0, v9 },
-{ "fmovdu",    F3F(2, 0x35, 0x082)|MCOND(FCONDU,0), F3F(~2, ~0x35, ~0x082)|MCOND(~FCONDU,~0),  "6,f,g", 0, v9 },
-{ "fmovdu",    F3F(2, 0x35, 0x0a2)|MCOND(FCONDU,0), F3F(~2, ~0x35, ~0x0a2)|MCOND(~FCONDU,~0),  "7,f,g", 0, v9 },
-{ "fmovdu",    F3F(2, 0x35, 0x0c2)|MCOND(FCONDU,0), F3F(~2, ~0x35, ~0x0c2)|MCOND(~FCONDU,~0),  "8,f,g", 0, v9 },
-{ "fmovdu",    F3F(2, 0x35, 0x0e2)|MCOND(FCONDU,0), F3F(~2, ~0x35, ~0x0e2)|MCOND(~FCONDU,~0),  "9,f,g", 0, v9 },
-{ "fmovqu",    F3F(2, 0x35, 0x083)|MCOND(FCONDU,0), F3F(~2, ~0x35, ~0x083)|MCOND(~FCONDU,~0),  "6,f,g", 0, v9 },
-{ "fmovqu",    F3F(2, 0x35, 0x0a3)|MCOND(FCONDU,0), F3F(~2, ~0x35, ~0x0a3)|MCOND(~FCONDU,~0),  "7,f,g", 0, v9 },
-{ "fmovqu",    F3F(2, 0x35, 0x0c3)|MCOND(FCONDU,0), F3F(~2, ~0x35, ~0x0c3)|MCOND(~FCONDU,~0),  "8,f,g", 0, v9 },
-{ "fmovqu",    F3F(2, 0x35, 0x0e3)|MCOND(FCONDU,0), F3F(~2, ~0x35, ~0x0e3)|MCOND(~FCONDU,~0),  "9,f,g", 0, v9 },
-{ "fmovsu",    F3F(2, 0x35, 0x081)|MCOND(FCONDU,0), F3F(~2, ~0x35, ~0x081)|MCOND(~FCONDU,~0),  "6,f,g", 0, v9 },
-{ "fmovsu",    F3F(2, 0x35, 0x0a1)|MCOND(FCONDU,0), F3F(~2, ~0x35, ~0x0a1)|MCOND(~FCONDU,~0),  "7,f,g", 0, v9 },
-{ "fmovsu",    F3F(2, 0x35, 0x0c1)|MCOND(FCONDU,0), F3F(~2, ~0x35, ~0x0c1)|MCOND(~FCONDU,~0),  "8,f,g", 0, v9 },
-{ "fmovsu",    F3F(2, 0x35, 0x0e1)|MCOND(FCONDU,0), F3F(~2, ~0x35, ~0x0e1)|MCOND(~FCONDU,~0),  "9,f,g", 0, v9 },
-{ "fmovdue",   F3F(2, 0x35, 0x082)|MCOND(FCONDUE,0), F3F(~2, ~0x35, ~0x082)|MCOND(~FCONDUE,~0),        "6,f,g", 0, v9 },
-{ "fmovdue",   F3F(2, 0x35, 0x0a2)|MCOND(FCONDUE,0), F3F(~2, ~0x35, ~0x0a2)|MCOND(~FCONDUE,~0),        "7,f,g", 0, v9 },
-{ "fmovdue",   F3F(2, 0x35, 0x0c2)|MCOND(FCONDUE,0), F3F(~2, ~0x35, ~0x0c2)|MCOND(~FCONDUE,~0),        "8,f,g", 0, v9 },
-{ "fmovdue",   F3F(2, 0x35, 0x0e2)|MCOND(FCONDUE,0), F3F(~2, ~0x35, ~0x0e2)|MCOND(~FCONDUE,~0),        "9,f,g", 0, v9 },
-{ "fmovque",   F3F(2, 0x35, 0x083)|MCOND(FCONDUE,0), F3F(~2, ~0x35, ~0x083)|MCOND(~FCONDUE,~0),        "6,f,g", 0, v9 },
-{ "fmovque",   F3F(2, 0x35, 0x0a3)|MCOND(FCONDUE,0), F3F(~2, ~0x35, ~0x0a3)|MCOND(~FCONDUE,~0),        "7,f,g", 0, v9 },
-{ "fmovque",   F3F(2, 0x35, 0x0c3)|MCOND(FCONDUE,0), F3F(~2, ~0x35, ~0x0c3)|MCOND(~FCONDUE,~0),        "8,f,g", 0, v9 },
-{ "fmovque",   F3F(2, 0x35, 0x0e3)|MCOND(FCONDUE,0), F3F(~2, ~0x35, ~0x0e3)|MCOND(~FCONDUE,~0),        "9,f,g", 0, v9 },
-{ "fmovsue",   F3F(2, 0x35, 0x081)|MCOND(FCONDUE,0), F3F(~2, ~0x35, ~0x081)|MCOND(~FCONDUE,~0),        "6,f,g", 0, v9 },
-{ "fmovsue",   F3F(2, 0x35, 0x0a1)|MCOND(FCONDUE,0), F3F(~2, ~0x35, ~0x0a1)|MCOND(~FCONDUE,~0),        "7,f,g", 0, v9 },
-{ "fmovsue",   F3F(2, 0x35, 0x0c1)|MCOND(FCONDUE,0), F3F(~2, ~0x35, ~0x0c1)|MCOND(~FCONDUE,~0),        "8,f,g", 0, v9 },
-{ "fmovsue",   F3F(2, 0x35, 0x0e1)|MCOND(FCONDUE,0), F3F(~2, ~0x35, ~0x0e1)|MCOND(~FCONDUE,~0),        "9,f,g", 0, v9 },
-{ "fmovdug",   F3F(2, 0x35, 0x082)|MCOND(FCONDUG,0), F3F(~2, ~0x35, ~0x082)|MCOND(~FCONDUG,~0),        "6,f,g", 0, v9 },
-{ "fmovdug",   F3F(2, 0x35, 0x0a2)|MCOND(FCONDUG,0), F3F(~2, ~0x35, ~0x0a2)|MCOND(~FCONDUG,~0),        "7,f,g", 0, v9 },
-{ "fmovdug",   F3F(2, 0x35, 0x0c2)|MCOND(FCONDUG,0), F3F(~2, ~0x35, ~0x0c2)|MCOND(~FCONDUG,~0),        "8,f,g", 0, v9 },
-{ "fmovdug",   F3F(2, 0x35, 0x0e2)|MCOND(FCONDUG,0), F3F(~2, ~0x35, ~0x0e2)|MCOND(~FCONDUG,~0),        "9,f,g", 0, v9 },
-{ "fmovqug",   F3F(2, 0x35, 0x083)|MCOND(FCONDUG,0), F3F(~2, ~0x35, ~0x083)|MCOND(~FCONDUG,~0),        "6,f,g", 0, v9 },
-{ "fmovqug",   F3F(2, 0x35, 0x0a3)|MCOND(FCONDUG,0), F3F(~2, ~0x35, ~0x0a3)|MCOND(~FCONDUG,~0),        "7,f,g", 0, v9 },
-{ "fmovqug",   F3F(2, 0x35, 0x0c3)|MCOND(FCONDUG,0), F3F(~2, ~0x35, ~0x0c3)|MCOND(~FCONDUG,~0),        "8,f,g", 0, v9 },
-{ "fmovqug",   F3F(2, 0x35, 0x0e3)|MCOND(FCONDUG,0), F3F(~2, ~0x35, ~0x0e3)|MCOND(~FCONDUG,~0),        "9,f,g", 0, v9 },
-{ "fmovsug",   F3F(2, 0x35, 0x081)|MCOND(FCONDUG,0), F3F(~2, ~0x35, ~0x081)|MCOND(~FCONDUG,~0),        "6,f,g", 0, v9 },
-{ "fmovsug",   F3F(2, 0x35, 0x0a1)|MCOND(FCONDUG,0), F3F(~2, ~0x35, ~0x0a1)|MCOND(~FCONDUG,~0),        "7,f,g", 0, v9 },
-{ "fmovsug",   F3F(2, 0x35, 0x0c1)|MCOND(FCONDUG,0), F3F(~2, ~0x35, ~0x0c1)|MCOND(~FCONDUG,~0),        "8,f,g", 0, v9 },
-{ "fmovsug",   F3F(2, 0x35, 0x0e1)|MCOND(FCONDUG,0), F3F(~2, ~0x35, ~0x0e1)|MCOND(~FCONDUG,~0),        "9,f,g", 0, v9 },
-{ "fmovduge",  F3F(2, 0x35, 0x082)|MCOND(FCONDUGE,0), F3F(~2, ~0x35, ~0x082)|MCOND(~FCONDUGE,~0),      "6,f,g", 0, v9 },
-{ "fmovduge",  F3F(2, 0x35, 0x0a2)|MCOND(FCONDUGE,0), F3F(~2, ~0x35, ~0x0a2)|MCOND(~FCONDUGE,~0),      "7,f,g", 0, v9 },
-{ "fmovduge",  F3F(2, 0x35, 0x0c2)|MCOND(FCONDUGE,0), F3F(~2, ~0x35, ~0x0c2)|MCOND(~FCONDUGE,~0),      "8,f,g", 0, v9 },
-{ "fmovduge",  F3F(2, 0x35, 0x0e2)|MCOND(FCONDUGE,0), F3F(~2, ~0x35, ~0x0e2)|MCOND(~FCONDUGE,~0),      "9,f,g", 0, v9 },
-{ "fmovquge",  F3F(2, 0x35, 0x083)|MCOND(FCONDUGE,0), F3F(~2, ~0x35, ~0x083)|MCOND(~FCONDUGE,~0),      "6,f,g", 0, v9 },
-{ "fmovquge",  F3F(2, 0x35, 0x0a3)|MCOND(FCONDUGE,0), F3F(~2, ~0x35, ~0x0a3)|MCOND(~FCONDUGE,~0),      "7,f,g", 0, v9 },
-{ "fmovquge",  F3F(2, 0x35, 0x0c3)|MCOND(FCONDUGE,0), F3F(~2, ~0x35, ~0x0c3)|MCOND(~FCONDUGE,~0),      "8,f,g", 0, v9 },
-{ "fmovquge",  F3F(2, 0x35, 0x0e3)|MCOND(FCONDUGE,0), F3F(~2, ~0x35, ~0x0e3)|MCOND(~FCONDUGE,~0),      "9,f,g", 0, v9 },
-{ "fmovsuge",  F3F(2, 0x35, 0x081)|MCOND(FCONDUGE,0), F3F(~2, ~0x35, ~0x081)|MCOND(~FCONDUGE,~0),      "6,f,g", 0, v9 },
-{ "fmovsuge",  F3F(2, 0x35, 0x0a1)|MCOND(FCONDUGE,0), F3F(~2, ~0x35, ~0x0a1)|MCOND(~FCONDUGE,~0),      "7,f,g", 0, v9 },
-{ "fmovsuge",  F3F(2, 0x35, 0x0c1)|MCOND(FCONDUGE,0), F3F(~2, ~0x35, ~0x0c1)|MCOND(~FCONDUGE,~0),      "8,f,g", 0, v9 },
-{ "fmovsuge",  F3F(2, 0x35, 0x0e1)|MCOND(FCONDUGE,0), F3F(~2, ~0x35, ~0x0e1)|MCOND(~FCONDUGE,~0),      "9,f,g", 0, v9 },
-{ "fmovdul",   F3F(2, 0x35, 0x082)|MCOND(FCONDUL,0), F3F(~2, ~0x35, ~0x082)|MCOND(~FCONDUL,~0),        "6,f,g", 0, v9 },
-{ "fmovdul",   F3F(2, 0x35, 0x0a2)|MCOND(FCONDUL,0), F3F(~2, ~0x35, ~0x0a2)|MCOND(~FCONDUL,~0),        "7,f,g", 0, v9 },
-{ "fmovdul",   F3F(2, 0x35, 0x0c2)|MCOND(FCONDUL,0), F3F(~2, ~0x35, ~0x0c2)|MCOND(~FCONDUL,~0),        "8,f,g", 0, v9 },
-{ "fmovdul",   F3F(2, 0x35, 0x0e2)|MCOND(FCONDUL,0), F3F(~2, ~0x35, ~0x0e2)|MCOND(~FCONDUL,~0),        "9,f,g", 0, v9 },
-{ "fmovqul",   F3F(2, 0x35, 0x083)|MCOND(FCONDUL,0), F3F(~2, ~0x35, ~0x083)|MCOND(~FCONDUL,~0),        "6,f,g", 0, v9 },
-{ "fmovqul",   F3F(2, 0x35, 0x0a3)|MCOND(FCONDUL,0), F3F(~2, ~0x35, ~0x0a3)|MCOND(~FCONDUL,~0),        "7,f,g", 0, v9 },
-{ "fmovqul",   F3F(2, 0x35, 0x0c3)|MCOND(FCONDUL,0), F3F(~2, ~0x35, ~0x0c3)|MCOND(~FCONDUL,~0),        "8,f,g", 0, v9 },
-{ "fmovqul",   F3F(2, 0x35, 0x0e3)|MCOND(FCONDUL,0), F3F(~2, ~0x35, ~0x0e3)|MCOND(~FCONDUL,~0),        "9,f,g", 0, v9 },
-{ "fmovsul",   F3F(2, 0x35, 0x081)|MCOND(FCONDUL,0), F3F(~2, ~0x35, ~0x081)|MCOND(~FCONDUL,~0),        "6,f,g", 0, v9 },
-{ "fmovsul",   F3F(2, 0x35, 0x0a1)|MCOND(FCONDUL,0), F3F(~2, ~0x35, ~0x0a1)|MCOND(~FCONDUL,~0),        "7,f,g", 0, v9 },
-{ "fmovsul",   F3F(2, 0x35, 0x0c1)|MCOND(FCONDUL,0), F3F(~2, ~0x35, ~0x0c1)|MCOND(~FCONDUL,~0),        "8,f,g", 0, v9 },
-{ "fmovsul",   F3F(2, 0x35, 0x0e1)|MCOND(FCONDUL,0), F3F(~2, ~0x35, ~0x0e1)|MCOND(~FCONDUL,~0),        "9,f,g", 0, v9 },
-{ "fmovdule",  F3F(2, 0x35, 0x082)|MCOND(FCONDULE,0), F3F(~2, ~0x35, ~0x082)|MCOND(~FCONDULE,~0),      "6,f,g", 0, v9 },
-{ "fmovdule",  F3F(2, 0x35, 0x0a2)|MCOND(FCONDULE,0), F3F(~2, ~0x35, ~0x0a2)|MCOND(~FCONDULE,~0),      "7,f,g", 0, v9 },
-{ "fmovdule",  F3F(2, 0x35, 0x0c2)|MCOND(FCONDULE,0), F3F(~2, ~0x35, ~0x0c2)|MCOND(~FCONDULE,~0),      "8,f,g", 0, v9 },
-{ "fmovdule",  F3F(2, 0x35, 0x0e2)|MCOND(FCONDULE,0), F3F(~2, ~0x35, ~0x0e2)|MCOND(~FCONDULE,~0),      "9,f,g", 0, v9 },
-{ "fmovqule",  F3F(2, 0x35, 0x083)|MCOND(FCONDULE,0), F3F(~2, ~0x35, ~0x083)|MCOND(~FCONDULE,~0),      "6,f,g", 0, v9 },
-{ "fmovqule",  F3F(2, 0x35, 0x0a3)|MCOND(FCONDULE,0), F3F(~2, ~0x35, ~0x0a3)|MCOND(~FCONDULE,~0),      "7,f,g", 0, v9 },
-{ "fmovqule",  F3F(2, 0x35, 0x0c3)|MCOND(FCONDULE,0), F3F(~2, ~0x35, ~0x0c3)|MCOND(~FCONDULE,~0),      "8,f,g", 0, v9 },
-{ "fmovqule",  F3F(2, 0x35, 0x0e3)|MCOND(FCONDULE,0), F3F(~2, ~0x35, ~0x0e3)|MCOND(~FCONDULE,~0),      "9,f,g", 0, v9 },
-{ "fmovsule",  F3F(2, 0x35, 0x081)|MCOND(FCONDULE,0), F3F(~2, ~0x35, ~0x081)|MCOND(~FCONDULE,~0),      "6,f,g", 0, v9 },
-{ "fmovsule",  F3F(2, 0x35, 0x0a1)|MCOND(FCONDULE,0), F3F(~2, ~0x35, ~0x0a1)|MCOND(~FCONDULE,~0),      "7,f,g", 0, v9 },
-{ "fmovsule",  F3F(2, 0x35, 0x0c1)|MCOND(FCONDULE,0), F3F(~2, ~0x35, ~0x0c1)|MCOND(~FCONDULE,~0),      "8,f,g", 0, v9 },
-{ "fmovsule",  F3F(2, 0x35, 0x0e1)|MCOND(FCONDULE,0), F3F(~2, ~0x35, ~0x0e1)|MCOND(~FCONDULE,~0),      "9,f,g", 0, v9 },
-{ "fmovdvc",   F3F(2, 0x35, 0x102)|MCOND(CONDVC,0), F3F(~2, ~0x35, ~0x102)|MCOND(~CONDVC,~0),  "z,f,g", 0, v9 },
-{ "fmovdvc",   F3F(2, 0x35, 0x182)|MCOND(CONDVC,0), F3F(~2, ~0x35, ~0x182)|MCOND(~CONDVC,~0),  "Z,f,g", 0, v9 },
-{ "fmovqvc",   F3F(2, 0x35, 0x103)|MCOND(CONDVC,0), F3F(~2, ~0x35, ~0x103)|MCOND(~CONDVC,~0),  "z,f,g", 0, v9 },
-{ "fmovqvc",   F3F(2, 0x35, 0x183)|MCOND(CONDVC,0), F3F(~2, ~0x35, ~0x183)|MCOND(~CONDVC,~0),  "Z,f,g", 0, v9 },
-{ "fmovsvc",   F3F(2, 0x35, 0x101)|MCOND(CONDVC,0), F3F(~2, ~0x35, ~0x101)|MCOND(~CONDVC,~0),  "z,f,g", 0, v9 },
-{ "fmovsvc",   F3F(2, 0x35, 0x181)|MCOND(CONDVC,0), F3F(~2, ~0x35, ~0x181)|MCOND(~CONDVC,~0),  "Z,f,g", 0, v9 },
-{ "fmovdvs",   F3F(2, 0x35, 0x102)|MCOND(CONDVS,0), F3F(~2, ~0x35, ~0x102)|MCOND(~CONDVS,~0),  "z,f,g", 0, v9 },
-{ "fmovdvs",   F3F(2, 0x35, 0x182)|MCOND(CONDVS,0), F3F(~2, ~0x35, ~0x182)|MCOND(~CONDVS,~0),  "Z,f,g", 0, v9 },
-{ "fmovqvs",   F3F(2, 0x35, 0x103)|MCOND(CONDVS,0), F3F(~2, ~0x35, ~0x103)|MCOND(~CONDVS,~0),  "z,f,g", 0, v9 },
-{ "fmovqvs",   F3F(2, 0x35, 0x183)|MCOND(CONDVS,0), F3F(~2, ~0x35, ~0x183)|MCOND(~CONDVS,~0),  "Z,f,g", 0, v9 },
-{ "fmovsvs",   F3F(2, 0x35, 0x101)|MCOND(CONDVS,0), F3F(~2, ~0x35, ~0x101)|MCOND(~CONDVS,~0),  "z,f,g", 0, v9 },
-{ "fmovsvs",   F3F(2, 0x35, 0x181)|MCOND(CONDVS,0), F3F(~2, ~0x35, ~0x181)|MCOND(~CONDVS,~0),  "Z,f,g", 0, v9 },
-{ "fmovdz",    F3F(2, 0x35, 0x102)|MCOND(CONDZ,0),   F3F(~2, ~0x35, ~0x102)|MCOND(~CONDZ,~0),  "z,f,g", F_ALIAS, v9 },
-{ "fmovdz",    F3F(2, 0x35, 0x082)|MCOND(FCONDZ,0), F3F(~2, ~0x35, ~0x082)|MCOND(~FCONDZ,~0),  "6,f,g", F_ALIAS, v9 },
-{ "fmovdz",    F3F(2, 0x35, 0x182)|MCOND(CONDZ,0),   F3F(~2, ~0x35, ~0x182)|MCOND(~CONDZ,~0),  "Z,f,g", F_ALIAS, v9 },
-{ "fmovdz",    F3F(2, 0x35, 0x0a2)|MCOND(FCONDZ,0), F3F(~2, ~0x35, ~0x0a2)|MCOND(~FCONDZ,~0),  "7,f,g", F_ALIAS, v9 },
-{ "fmovdz",    F3F(2, 0x35, 0x0c2)|MCOND(FCONDZ,0), F3F(~2, ~0x35, ~0x0c2)|MCOND(~FCONDZ,~0),  "8,f,g", F_ALIAS, v9 },
-{ "fmovdz",    F3F(2, 0x35, 0x0e2)|MCOND(FCONDZ,0), F3F(~2, ~0x35, ~0x0e2)|MCOND(~FCONDZ,~0),  "9,f,g", F_ALIAS, v9 },
-{ "fmovqz",    F3F(2, 0x35, 0x103)|MCOND(CONDZ,0),   F3F(~2, ~0x35, ~0x103)|MCOND(~CONDZ,~0),  "z,f,g", F_ALIAS, v9 },
-{ "fmovqz",    F3F(2, 0x35, 0x083)|MCOND(FCONDZ,0), F3F(~2, ~0x35, ~0x083)|MCOND(~FCONDZ,~0),  "6,f,g", F_ALIAS, v9 },
-{ "fmovqz",    F3F(2, 0x35, 0x183)|MCOND(CONDZ,0),   F3F(~2, ~0x35, ~0x183)|MCOND(~CONDZ,~0),  "Z,f,g", F_ALIAS, v9 },
-{ "fmovqz",    F3F(2, 0x35, 0x0a3)|MCOND(FCONDZ,0), F3F(~2, ~0x35, ~0x0a3)|MCOND(~FCONDZ,~0),  "7,f,g", F_ALIAS, v9 },
-{ "fmovqz",    F3F(2, 0x35, 0x0c3)|MCOND(FCONDZ,0), F3F(~2, ~0x35, ~0x0c3)|MCOND(~FCONDZ,~0),  "8,f,g", F_ALIAS, v9 },
-{ "fmovqz",    F3F(2, 0x35, 0x0e3)|MCOND(FCONDZ,0), F3F(~2, ~0x35, ~0x0e3)|MCOND(~FCONDZ,~0),  "9,f,g", F_ALIAS, v9 },
-{ "fmovsz",    F3F(2, 0x35, 0x101)|MCOND(CONDZ,0),   F3F(~2, ~0x35, ~0x101)|MCOND(~CONDZ,~0),  "z,f,g", F_ALIAS, v9 },
-{ "fmovsz",    F3F(2, 0x35, 0x081)|MCOND(FCONDZ,0), F3F(~2, ~0x35, ~0x081)|MCOND(~FCONDZ,~0),  "6,f,g", F_ALIAS, v9 },
-{ "fmovsz",    F3F(2, 0x35, 0x181)|MCOND(CONDZ,0),   F3F(~2, ~0x35, ~0x181)|MCOND(~CONDZ,~0),  "Z,f,g", F_ALIAS, v9 },
-{ "fmovsz",    F3F(2, 0x35, 0x0a1)|MCOND(FCONDZ,0), F3F(~2, ~0x35, ~0x0a1)|MCOND(~FCONDZ,~0),  "7,f,g", F_ALIAS, v9 },
-{ "fmovsz",    F3F(2, 0x35, 0x0c1)|MCOND(FCONDZ,0), F3F(~2, ~0x35, ~0x0c1)|MCOND(~FCONDZ,~0),  "8,f,g", F_ALIAS, v9 },
-{ "fmovsz",    F3F(2, 0x35, 0x0e1)|MCOND(FCONDZ,0), F3F(~2, ~0x35, ~0x0e1)|MCOND(~FCONDZ,~0),  "9,f,g", F_ALIAS, v9 },
-
-#define brfc(opcode, mask, lose, flags) \
- { opcode, (mask), ANNUL|(lose), "l",    flags|F_DELAYED, v6 }, \
- { opcode, (mask)|ANNUL, (lose), ",a l", flags|F_DELAYED, v6 }
-
-#define brfcx(opcode, mask, lose, flags) /* v9 */ \
- { opcode, FBFCC(0)|(mask), ANNUL|BPRED|FBFCC(~0)|(lose), "6,G",   flags|F_DELAYED, v9 }, \
- { opcode, FBFCC(0)|(mask)|ANNUL, BPRED|FBFCC(~0)|(lose), ",a 6,G",   flags|F_DELAYED, v9 }, \
- { opcode, FBFCC(0)|(mask), ANNUL|BPRED|FBFCC(~0)|(lose), ",N 6,G",   flags|F_DELAYED, v9 }, \
- { opcode, FBFCC(0)|(mask)|ANNUL, BPRED|FBFCC(~0)|(lose), ",a,N 6,G", flags|F_DELAYED, v9 }, \
- { opcode, FBFCC(0)|(mask)|BPRED, ANNUL|FBFCC(~0)|(lose), ",T 6,G",   flags|F_DELAYED, v9 }, \
- { opcode, FBFCC(0)|(mask)|BPRED|ANNUL, FBFCC(~0)|(lose), ",a,T 6,G", flags|F_DELAYED, v9 }, \
- { opcode, FBFCC(1)|(mask), ANNUL|BPRED|FBFCC(~1)|(lose), "7,G",   flags|F_DELAYED, v9 }, \
- { opcode, FBFCC(1)|(mask)|ANNUL, BPRED|FBFCC(~1)|(lose), ",a 7,G",   flags|F_DELAYED, v9 }, \
- { opcode, FBFCC(1)|(mask), ANNUL|BPRED|FBFCC(~1)|(lose), ",N 7,G",   flags|F_DELAYED, v9 }, \
- { opcode, FBFCC(1)|(mask)|ANNUL, BPRED|FBFCC(~1)|(lose), ",a,N 7,G", flags|F_DELAYED, v9 }, \
- { opcode, FBFCC(1)|(mask)|BPRED, ANNUL|FBFCC(~1)|(lose), ",T 7,G",   flags|F_DELAYED, v9 }, \
- { opcode, FBFCC(1)|(mask)|BPRED|ANNUL, FBFCC(~1)|(lose), ",a,T 7,G", flags|F_DELAYED, v9 }, \
- { opcode, FBFCC(2)|(mask), ANNUL|BPRED|FBFCC(~2)|(lose), "8,G",   flags|F_DELAYED, v9 }, \
- { opcode, FBFCC(2)|(mask)|ANNUL, BPRED|FBFCC(~2)|(lose), ",a 8,G",   flags|F_DELAYED, v9 }, \
- { opcode, FBFCC(2)|(mask), ANNUL|BPRED|FBFCC(~2)|(lose), ",N 8,G",   flags|F_DELAYED, v9 }, \
- { opcode, FBFCC(2)|(mask)|ANNUL, BPRED|FBFCC(~2)|(lose), ",a,N 8,G", flags|F_DELAYED, v9 }, \
- { opcode, FBFCC(2)|(mask)|BPRED, ANNUL|FBFCC(~2)|(lose), ",T 8,G",   flags|F_DELAYED, v9 }, \
- { opcode, FBFCC(2)|(mask)|BPRED|ANNUL, FBFCC(~2)|(lose), ",a,T 8,G", flags|F_DELAYED, v9 }, \
- { opcode, FBFCC(3)|(mask), ANNUL|BPRED|FBFCC(~3)|(lose), "9,G",   flags|F_DELAYED, v9 }, \
- { opcode, FBFCC(3)|(mask)|ANNUL, BPRED|FBFCC(~3)|(lose), ",a 9,G",   flags|F_DELAYED, v9 }, \
- { opcode, FBFCC(3)|(mask), ANNUL|BPRED|FBFCC(~3)|(lose), ",N 9,G",   flags|F_DELAYED, v9 }, \
- { opcode, FBFCC(3)|(mask)|ANNUL, BPRED|FBFCC(~3)|(lose), ",a,N  9,G", flags|F_DELAYED, v9 }, \
- { opcode, FBFCC(3)|(mask)|BPRED, ANNUL|FBFCC(~3)|(lose), ",T 9,G",   flags|F_DELAYED, v9 }, \
- { opcode, FBFCC(3)|(mask)|BPRED|ANNUL, FBFCC(~3)|(lose), ",a,T 9,G", flags|F_DELAYED, v9 }
-
-#define condfc(fop, cop, mask, flags) \
-  brfc(fop, F2(0, 6)|COND(mask), F2(~0, ~6)|COND(~(mask)), flags), \
-  brfcx(fop, F2(0, 5)|COND(mask), F2(~0, ~5)|COND(~(mask)), flags), /* v9 */ \
-  brfc(cop, F2(0, 7)|COND(mask), F2(~0, ~7)|COND(~(mask)), flags) \
-
-#define condf(fop, mask, flags) \
-  brfcx(fop, F2(0, 5)|COND(mask), F2(~0, ~5)|COND(~(mask)), flags), /* v9 */ \
-  brfc(fop, F2(0, 6)|COND(mask), F2(~0, ~6)|COND(~(mask)), flags)
-
-condfc("fb",   "cb",    0x8, 0),
-condfc("fba",  "cba",   0x8, F_ALIAS),
-condfc("fbe",  "cb0",   0x9, 0),
-condf("fbz",            0x9, F_ALIAS),
-condfc("fbg",  "cb2",   0x6, 0),
-condfc("fbge", "cb02",  0xb, 0),
-condfc("fbl",  "cb1",   0x4, 0),
-condfc("fble", "cb01",  0xd, 0),
-condfc("fblg", "cb12",  0x2, 0),
-condfc("fbn",  "cbn",   0x0, 0),
-condfc("fbne", "cb123", 0x1, 0),
-condf("fbnz",           0x1, F_ALIAS),
-condfc("fbo",  "cb012", 0xf, 0),
-condfc("fbu",  "cb3",   0x7, 0),
-condfc("fbue", "cb03",  0xa, 0),
-condfc("fbug", "cb23",  0x5, 0),
-condfc("fbuge",        "cb023", 0xc, 0),
-condfc("fbul", "cb13",  0x3, 0),
-condfc("fbule",        "cb013", 0xe, 0),
-
-#undef condfc
-#undef brfc
-#undef brfcx   /* v9 */
-
-{ "jmp",       F3(2, 0x38, 0), F3(~2, ~0x38, ~0)|RD_G0|ASI(~0),        "1+2", F_DELAYED, v6 }, /* jmpl rs1+rs2,%g0 */
-{ "jmp",       F3(2, 0x38, 0), F3(~2, ~0x38, ~0)|RD_G0|ASI_RS2(~0),    "1", F_DELAYED, v6 }, /* jmpl rs1+%g0,%g0 */
-{ "jmp",       F3(2, 0x38, 1), F3(~2, ~0x38, ~1)|RD_G0,                "1+i", F_DELAYED, v6 }, /* jmpl rs1+i,%g0 */
-{ "jmp",       F3(2, 0x38, 1), F3(~2, ~0x38, ~1)|RD_G0,                "i+1", F_DELAYED, v6 }, /* jmpl i+rs1,%g0 */
-{ "jmp",       F3(2, 0x38, 1), F3(~2, ~0x38, ~1)|RD_G0|RS1_G0, "i", F_DELAYED, v6 }, /* jmpl %g0+i,%g0 */
-
-{ "nop",       F2(0, 4), 0xfeffffff, "", 0, v6 }, /* sethi 0, %g0 */
-
-{ "set",       F2(0x0, 0x4), F2(~0x0, ~0x4), "Sh,d", F_ALIAS, v6 },
-
-{ "sethi",     F2(0x0, 0x4), F2(~0x0, ~0x4), "h,d", 0, v6 },
-
-{ "taddcc",    F3(2, 0x20, 0), F3(~2, ~0x20, ~0)|ASI(~0),      "1,2,d", 0, v6 },
-{ "taddcc",    F3(2, 0x20, 1), F3(~2, ~0x20, ~1),              "1,i,d", 0, v6 },
-{ "taddcc",    F3(2, 0x20, 1), F3(~2, ~0x20, ~1),              "i,1,d", 0, v6 },
-{ "taddcctv",  F3(2, 0x22, 0), F3(~2, ~0x22, ~0)|ASI(~0),      "1,2,d", 0, v6 },
-{ "taddcctv",  F3(2, 0x22, 1), F3(~2, ~0x22, ~1),              "1,i,d", 0, v6 },
-{ "taddcctv",  F3(2, 0x22, 1), F3(~2, ~0x22, ~1),              "i,1,d", 0, v6 },
-
-{ "tsubcc",    F3(2, 0x21, 0), F3(~2, ~0x21, ~0)|ASI(~0),      "1,2,d", 0, v6 },
-{ "tsubcc",    F3(2, 0x21, 1), F3(~2, ~0x21, ~1),              "1,i,d", 0, v6 },
-{ "tsubcctv",  F3(2, 0x23, 0), F3(~2, ~0x23, ~0)|ASI(~0),      "1,2,d", 0, v6 },
-{ "tsubcctv",  F3(2, 0x23, 1), F3(~2, ~0x23, ~1),              "1,i,d", 0, v6 },
-
-/* FIXME Thise is marked F_ALIAS, so that it won't conflict with new v9
-   insns when v9 is present.  Otherwise, the F_ALIAS flag is ignored.  */
-{ "unimp",     F2(0x0, 0x0), 0xffc00000, "n", F_ALIAS, v6 },
-{ "illtrap",   F2(0, 0), F2(~0, ~0)|RD_G0, "n", 0, v9 },
-
-/* This *is* a commutative instruction.  */
-{ "xnor",      F3(2, 0x07, 0), F3(~2, ~0x07, ~0)|ASI(~0),      "1,2,d", 0, v6 },
-{ "xnor",      F3(2, 0x07, 1), F3(~2, ~0x07, ~1),              "1,i,d", 0, v6 },
-{ "xnor",      F3(2, 0x07, 1), F3(~2, ~0x07, ~1),              "i,1,d", 0, v6 },
-/* This *is* a commutative instruction.  */
-{ "xnorcc",    F3(2, 0x17, 0), F3(~2, ~0x17, ~0)|ASI(~0),      "1,2,d", 0, v6 },
-{ "xnorcc",    F3(2, 0x17, 1), F3(~2, ~0x17, ~1),              "1,i,d", 0, v6 },
-{ "xnorcc",    F3(2, 0x17, 1), F3(~2, ~0x17, ~1),              "i,1,d", 0, v6 },
-{ "xor",       F3(2, 0x03, 0), F3(~2, ~0x03, ~0)|ASI(~0),      "1,2,d", 0, v6 },
-{ "xor",       F3(2, 0x03, 1), F3(~2, ~0x03, ~1),              "1,i,d", 0, v6 },
-{ "xor",       F3(2, 0x03, 1), F3(~2, ~0x03, ~1),              "i,1,d", 0, v6 },
-{ "xorcc",     F3(2, 0x13, 0), F3(~2, ~0x13, ~0)|ASI(~0),      "1,2,d", 0, v6 },
-{ "xorcc",     F3(2, 0x13, 1), F3(~2, ~0x13, ~1),              "1,i,d", 0, v6 },
-{ "xorcc",     F3(2, 0x13, 1), F3(~2, ~0x13, ~1),              "i,1,d", 0, v6 },
-
-{ "not",       F3(2, 0x07, 0), F3(~2, ~0x07, ~0)|ASI(~0), "1,d", F_ALIAS, v6 }, /* xnor rs1,%0,rd */
-{ "not",       F3(2, 0x07, 0), F3(~2, ~0x07, ~0)|ASI(~0), "r", F_ALIAS, v6 }, /* xnor rd,%0,rd */
-
-{ "btog",      F3(2, 0x03, 0), F3(~2, ~0x03, ~0)|ASI(~0),      "2,r", F_ALIAS, v6 }, /* xor rd,rs2,rd */
-{ "btog",      F3(2, 0x03, 1), F3(~2, ~0x03, ~1),              "i,r", F_ALIAS, v6 }, /* xor rd,i,rd */
-
-/* FPop1 and FPop2 are not instructions.  Don't accept them.  */
-
-{ "fdtoi",     F3F(2, 0x34, 0x0d2), F3F(~2, ~0x34, ~0x0d2)|RS1_G0, "B,g", 0, v6 },
-{ "fstoi",     F3F(2, 0x34, 0x0d1), F3F(~2, ~0x34, ~0x0d1)|RS1_G0, "f,g", 0, v6 },
-{ "fqtoi",     F3F(2, 0x34, 0x0d3), F3F(~2, ~0x34, ~0x0d3)|RS1_G0, "R,g", 0, v8 },
-
-{ "fdtox",     F3F(2, 0x34, 0x082), F3F(~2, ~0x34, ~0x082)|RS1_G0, "B,g", 0, v9 },
-{ "fstox",     F3F(2, 0x34, 0x081), F3F(~2, ~0x34, ~0x081)|RS1_G0, "f,g", 0, v9 },
-{ "fqtox",     F3F(2, 0x34, 0x083), F3F(~2, ~0x34, ~0x083)|RS1_G0, "R,g", 0, v9 },
-
-{ "fitod",     F3F(2, 0x34, 0x0c8), F3F(~2, ~0x34, ~0x0c8)|RS1_G0, "f,H", 0, v6 },
-{ "fitos",     F3F(2, 0x34, 0x0c4), F3F(~2, ~0x34, ~0x0c4)|RS1_G0, "f,g", 0, v6 },
-{ "fitoq",     F3F(2, 0x34, 0x0cc), F3F(~2, ~0x34, ~0x0cc)|RS1_G0, "f,J", 0, v8 },
-
-{ "fxtod",     F3F(2, 0x34, 0x088), F3F(~2, ~0x34, ~0x088)|RS1_G0, "f,H", 0, v9 },
-{ "fxtos",     F3F(2, 0x34, 0x084), F3F(~2, ~0x34, ~0x084)|RS1_G0, "f,g", 0, v9 },
-{ "fxtoq",     F3F(2, 0x34, 0x08c), F3F(~2, ~0x34, ~0x08c)|RS1_G0, "f,J", 0, v9 },
-
-{ "fdtoq",     F3F(2, 0x34, 0x0ce), F3F(~2, ~0x34, ~0x0ce)|RS1_G0, "B,J", 0, v8 },
-{ "fdtos",     F3F(2, 0x34, 0x0c6), F3F(~2, ~0x34, ~0x0c6)|RS1_G0, "B,g", 0, v6 },
-{ "fqtod",     F3F(2, 0x34, 0x0cb), F3F(~2, ~0x34, ~0x0cb)|RS1_G0, "R,H", 0, v8 },
-{ "fqtos",     F3F(2, 0x34, 0x0c7), F3F(~2, ~0x34, ~0x0c7)|RS1_G0, "R,g", 0, v8 },
-{ "fstod",     F3F(2, 0x34, 0x0c9), F3F(~2, ~0x34, ~0x0c9)|RS1_G0, "f,H", 0, v6 },
-{ "fstoq",     F3F(2, 0x34, 0x0cd), F3F(~2, ~0x34, ~0x0cd)|RS1_G0, "f,J", 0, v8 },
-
-{ "fdivd",     F3F(2, 0x34, 0x04e), F3F(~2, ~0x34, ~0x04e), "v,B,H", 0, v6 },
-{ "fdivq",     F3F(2, 0x34, 0x04f), F3F(~2, ~0x34, ~0x04f), "V,R,J", 0, v8 },
-{ "fdivs",     F3F(2, 0x34, 0x04d), F3F(~2, ~0x34, ~0x04d), "e,f,g", 0, v6 },
-{ "fmuld",     F3F(2, 0x34, 0x04a), F3F(~2, ~0x34, ~0x04a), "v,B,H", 0, v6 },
-{ "fmulq",     F3F(2, 0x34, 0x04b), F3F(~2, ~0x34, ~0x04b), "V,R,J", 0, v8 },
-{ "fmuls",     F3F(2, 0x34, 0x049), F3F(~2, ~0x34, ~0x049), "e,f,g", 0, v6 },
-
-{ "fdmulq",    F3F(2, 0x34, 0x06e), F3F(~2, ~0x34, ~0x06e), "v,B,J", 0, v8 },
-{ "fsmuld",    F3F(2, 0x34, 0x069), F3F(~2, ~0x34, ~0x069), "e,f,H", 0, v8 },
-
-{ "fsqrtd",    F3F(2, 0x34, 0x02a), F3F(~2, ~0x34, ~0x02a)|RS1_G0, "B,H", 0, v7 },
-{ "fsqrtq",    F3F(2, 0x34, 0x02b), F3F(~2, ~0x34, ~0x02b)|RS1_G0, "R,J", 0, v8 },
-{ "fsqrts",    F3F(2, 0x34, 0x029), F3F(~2, ~0x34, ~0x029)|RS1_G0, "f,g", 0, v7 },
-
-{ "fabsd",     F3F(2, 0x34, 0x00a), F3F(~2, ~0x34, ~0x00a)|RS1_G0, "B,H", 0, v9 },
-{ "fabsq",     F3F(2, 0x34, 0x00b), F3F(~2, ~0x34, ~0x00b)|RS1_G0, "R,J", 0, v9 },
-{ "fabss",     F3F(2, 0x34, 0x009), F3F(~2, ~0x34, ~0x009)|RS1_G0, "f,g", 0, v6 },
-{ "fmovd",     F3F(2, 0x34, 0x002), F3F(~2, ~0x34, ~0x002)|RS1_G0, "B,H", 0, v9 },
-{ "fmovq",     F3F(2, 0x34, 0x003), F3F(~2, ~0x34, ~0x003)|RS1_G0, "R,J", 0, v9 },
-{ "fmovs",     F3F(2, 0x34, 0x001), F3F(~2, ~0x34, ~0x001)|RS1_G0, "f,g", 0, v6 },
-{ "fnegd",     F3F(2, 0x34, 0x006), F3F(~2, ~0x34, ~0x006)|RS1_G0, "B,H", 0, v9 },
-{ "fnegq",     F3F(2, 0x34, 0x007), F3F(~2, ~0x34, ~0x007)|RS1_G0, "R,J", 0, v9 },
-{ "fnegs",     F3F(2, 0x34, 0x005), F3F(~2, ~0x34, ~0x005)|RS1_G0, "f,g", 0, v6 },
-
-{ "faddd",     F3F(2, 0x34, 0x042), F3F(~2, ~0x34, ~0x042), "v,B,H", 0, v6 },
-{ "faddq",     F3F(2, 0x34, 0x043), F3F(~2, ~0x34, ~0x043), "V,R,J", 0, v8 },
-{ "fadds",     F3F(2, 0x34, 0x041), F3F(~2, ~0x34, ~0x041), "e,f,g", 0, v6 },
-{ "fsubd",     F3F(2, 0x34, 0x046), F3F(~2, ~0x34, ~0x046), "v,B,H", 0, v6 },
-{ "fsubq",     F3F(2, 0x34, 0x047), F3F(~2, ~0x34, ~0x047), "V,R,J", 0, v8 },
-{ "fsubs",     F3F(2, 0x34, 0x045), F3F(~2, ~0x34, ~0x045), "e,f,g", 0, v6 },
-
-#define CMPFCC(x)      (((x)&0x3)<<25)
-
-{ "fcmpd",               F3F(2, 0x35, 0x052),            F3F(~2, ~0x35, ~0x052)|RD_G0,  "v,B",   0, v6 },
-{ "fcmpd",     CMPFCC(0)|F3F(2, 0x35, 0x052), CMPFCC(~0)|F3F(~2, ~0x35, ~0x052),        "6,v,B", 0, v9 },
-{ "fcmpd",     CMPFCC(1)|F3F(2, 0x35, 0x052), CMPFCC(~1)|F3F(~2, ~0x35, ~0x052),        "7,v,B", 0, v9 },
-{ "fcmpd",     CMPFCC(2)|F3F(2, 0x35, 0x052), CMPFCC(~2)|F3F(~2, ~0x35, ~0x052),        "8,v,B", 0, v9 },
-{ "fcmpd",     CMPFCC(3)|F3F(2, 0x35, 0x052), CMPFCC(~3)|F3F(~2, ~0x35, ~0x052),        "9,v,B", 0, v9 },
-{ "fcmped",              F3F(2, 0x35, 0x056),            F3F(~2, ~0x35, ~0x056)|RD_G0,  "v,B",   0, v6 },
-{ "fcmped",    CMPFCC(0)|F3F(2, 0x35, 0x056), CMPFCC(~0)|F3F(~2, ~0x35, ~0x056),        "6,v,B", 0, v9 },
-{ "fcmped",    CMPFCC(1)|F3F(2, 0x35, 0x056), CMPFCC(~1)|F3F(~2, ~0x35, ~0x056),        "7,v,B", 0, v9 },
-{ "fcmped",    CMPFCC(2)|F3F(2, 0x35, 0x056), CMPFCC(~2)|F3F(~2, ~0x35, ~0x056),        "8,v,B", 0, v9 },
-{ "fcmped",    CMPFCC(3)|F3F(2, 0x35, 0x056), CMPFCC(~3)|F3F(~2, ~0x35, ~0x056),        "9,v,B", 0, v9 },
-{ "fcmpq",               F3F(2, 0x34, 0x053),            F3F(~2, ~0x34, ~0x053)|RD_G0,  "V,R", 0, v8 },
-{ "fcmpq",     CMPFCC(0)|F3F(2, 0x35, 0x053), CMPFCC(~0)|F3F(~2, ~0x35, ~0x053),        "6,V,R", 0, v9 },
-{ "fcmpq",     CMPFCC(1)|F3F(2, 0x35, 0x053), CMPFCC(~1)|F3F(~2, ~0x35, ~0x053),        "7,V,R", 0, v9 },
-{ "fcmpq",     CMPFCC(2)|F3F(2, 0x35, 0x053), CMPFCC(~2)|F3F(~2, ~0x35, ~0x053),        "8,V,R", 0, v9 },
-{ "fcmpq",     CMPFCC(3)|F3F(2, 0x35, 0x053), CMPFCC(~3)|F3F(~2, ~0x35, ~0x053),        "9,V,R", 0, v9 },
-{ "fcmpeq",              F3F(2, 0x34, 0x057),            F3F(~2, ~0x34, ~0x057)|RD_G0,  "V,R", 0, v8 },
-{ "fcmpeq",    CMPFCC(0)|F3F(2, 0x35, 0x057), CMPFCC(~0)|F3F(~2, ~0x35, ~0x057),        "6,V,R", 0, v9 },
-{ "fcmpeq",    CMPFCC(1)|F3F(2, 0x35, 0x057), CMPFCC(~1)|F3F(~2, ~0x35, ~0x057),        "7,V,R", 0, v9 },
-{ "fcmpeq",    CMPFCC(2)|F3F(2, 0x35, 0x057), CMPFCC(~2)|F3F(~2, ~0x35, ~0x057),        "8,V,R", 0, v9 },
-{ "fcmpeq",    CMPFCC(3)|F3F(2, 0x35, 0x057), CMPFCC(~3)|F3F(~2, ~0x35, ~0x057),        "9,V,R", 0, v9 },
-{ "fcmps",               F3F(2, 0x35, 0x051),            F3F(~2, ~0x35, ~0x051)|RD_G0, "e,f",   0, v6 },
-{ "fcmps",     CMPFCC(0)|F3F(2, 0x35, 0x051), CMPFCC(~0)|F3F(~2, ~0x35, ~0x051),        "6,e,f", 0, v9 },
-{ "fcmps",     CMPFCC(1)|F3F(2, 0x35, 0x051), CMPFCC(~1)|F3F(~2, ~0x35, ~0x051),        "7,e,f", 0, v9 },
-{ "fcmps",     CMPFCC(2)|F3F(2, 0x35, 0x051), CMPFCC(~2)|F3F(~2, ~0x35, ~0x051),        "8,e,f", 0, v9 },
-{ "fcmps",     CMPFCC(3)|F3F(2, 0x35, 0x051), CMPFCC(~3)|F3F(~2, ~0x35, ~0x051),        "9,e,f", 0, v9 },
-{ "fcmpes",              F3F(2, 0x35, 0x055),            F3F(~2, ~0x35, ~0x055)|RD_G0, "e,f",   0, v6 },
-{ "fcmpes",    CMPFCC(0)|F3F(2, 0x35, 0x055), CMPFCC(~0)|F3F(~2, ~0x35, ~0x055),        "6,e,f", 0, v9 },
-{ "fcmpes",    CMPFCC(1)|F3F(2, 0x35, 0x055), CMPFCC(~1)|F3F(~2, ~0x35, ~0x055),        "7,e,f", 0, v9 },
-{ "fcmpes",    CMPFCC(2)|F3F(2, 0x35, 0x055), CMPFCC(~2)|F3F(~2, ~0x35, ~0x055),        "8,e,f", 0, v9 },
-{ "fcmpes",    CMPFCC(3)|F3F(2, 0x35, 0x055), CMPFCC(~3)|F3F(~2, ~0x35, ~0x055),        "9,e,f", 0, v9 },
-
-/* FIXME These are marked F_ALIAS, so that they won't conflict with new v9
-   insns when v9 is present.  Otherwise, the F_ALIAS flag is ignored.  */
-{ "cpop1",     F3(2, 0x36, 0), F3(~2, ~0x36, ~1), "[1+2],d", F_ALIAS, v6 },
-{ "cpop2",     F3(2, 0x37, 0), F3(~2, ~0x37, ~1), "[1+2],d", F_ALIAS, v6 },
-{ "impdep1",   F3(2, 0x36, 0), F3(~2, ~0x36, ~1), "[1+2],d", 0, v9 },
-{ "impdep2",   F3(2, 0x37, 0), F3(~2, ~0x37, ~1), "[1+2],d", 0, v9 },
-    
-{ "casa",      F3(3, 0x3c, 0), F3(~3, ~0x3c, ~0), "[1]A,2,d", 0, v9 },
-{ "casa",      F3(3, 0x3c, 1), F3(~3, ~0x3c, ~1), "[1]o,2,d", 0, v9 },
-{ "casxa",     F3(3, 0x3e, 0), F3(~3, ~0x3e, ~0), "[1]A,2,d", 0, v9 },
-{ "casxa",     F3(3, 0x3e, 1), F3(~3, ~0x3e, ~1), "[1]o,2,d", 0, v9 },
-
-};
-
-const int bfd_sparc_num_opcodes = ((sizeof sparc_opcodes)/(sizeof sparc_opcodes[0]));
diff --git a/bfd/startcom-p b/bfd/startcom-p
deleted file mode 100755 (executable)
index 0748fad..0000000
+++ /dev/null
@@ -1,12 +0,0 @@
-# sed script for preprocessing BFD header files
-# <start comment> activity:
-/^\/\*$/{
-N
-# Delete empty comment blocks
-/^\/\*\n\*\/ *$/d
-# Transpose <start comment><blank line>
-s/^\/\*\n *$/\
-\/*/
-# merge <start comment> on line by itself with following line
-s/^\/\*\n\(.*\)/\/* \1/
-}
diff --git a/bfd/tolibbfd b/bfd/tolibbfd
deleted file mode 100755 (executable)
index ef9531e..0000000
+++ /dev/null
@@ -1,4 +0,0 @@
-/---------------START FROM/,/---------------END FROM/d
-/\/\*:libbfd.c\*\//r libbfd.ip
-/\/\*:cache.c\*\//r cache.ip
-/\/\*:reloc.c\*\//r reloc.ip
diff --git a/bfd/tolibcoff b/bfd/tolibcoff
deleted file mode 100755 (executable)
index 548c8ba..0000000
+++ /dev/null
@@ -1 +0,0 @@
-/\/\*:coffcode.h\*\//r coffcode.p
diff --git a/bfd/trad-core.h b/bfd/trad-core.h
deleted file mode 100644 (file)
index b86f485..0000000
+++ /dev/null
@@ -1,28 +0,0 @@
-/* Declarations of BFD back end for traditional Unix core files 
-   Copyright (C) 1990-1991 Free Software Foundation, Inc.
-   Written by Cygnus Support.  Mostly John Gilmore's fault.
-
-This file is part of BFD, the Binary File Descriptor library.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-#include "ansidecl.h"
-
-/* forward declaration */
-PROTO (bfd_target *, trad_unix_core_file_p, (bfd *abfd));
-PROTO (char *,              trad_unix_core_file_failing_command, (bfd *abfd));
-PROTO (int,         trad_unix_core_file_failing_signal, (bfd *abfd));
-PROTO (boolean,      trad_unix_core_file_matches_executable_p,
-                        (bfd *core_bfd, bfd *exec_bfd));
diff --git a/bfd/unPROTO b/bfd/unPROTO
deleted file mode 100755 (executable)
index a6f9520..0000000
+++ /dev/null
@@ -1,18 +0,0 @@
-#
-# The PROTO macro is a subterfuge to be compatible with both ANSI and K&R 
-# declaration syntax.  It's not widely known, so for the docn just map the 
-# thing to ANSI declaration syntax.
-# 
-# First, join up defns broken across multiple lines in source---but leave
-# any linebreaks, to prettify our examples 
-:pbegn
-/PROTO(.*, *$/N
-s/\n/?/
-t pbegn
-s/?/\
-/g
-# Now actually do the PROTO interpretation.
-# A PROTO invocation looks like
-#   PROTO( resulttype, function, (arglist));
-s/[    ]*PROTO(\(.*\),[\n      ]*\(.*\),[\n    ]*\((.*)\));/\1 \2\3;/
-
diff --git a/binutils/binutils.texinfo b/binutils/binutils.texinfo
deleted file mode 100755 (executable)
index 37167e5..0000000
+++ /dev/null
@@ -1,730 +0,0 @@
-\input texinfo
-@setfilename binutils.info
-@synindex ky cp
-@c
-@c This file documents the GNU binary utilities "ar", "ld", "objdump", "nm", 
-@c "size", "strip", and "ranlib".
-@c
-@c Copyright (C) 1991 Free Software Foundation, Inc.
-@c 
-@c This text may be freely distributed under the terms of the GNU
-@c General Public License.
-@c
-@c $Id$
-@iftex
-@finalout
-@c @smallbook
-@end iftex
-@c @cropmarks
-@setchapternewpage odd
-@settitle GNU Binary Utilities
-@titlepage
-@title The GNU Binary Utilities
-@subtitle Version 1.90
-@sp 1
-@subtitle October 1991
-@author Roland H. Pesch
-@author Cygnus Support
-@page
-
-@tex
-\def\$#1${{#1}} % Kluge: collect RCS revision info without $...$
-\xdef\manvers{\$Revision$} % For use in headers, footers too
-{\parskip=0pt \hfill Cygnus Support\par \hfill \manvers\par \hfill
-\TeX{}info \texinfoversion\par }
-@end tex
-
-@vskip 0pt plus 1filll
-Copyright @copyright{} 1991 Free Software Foundation, Inc.
-
-Permission is granted to make and distribute verbatim copies of
-this manual provided the copyright notice and this permission notice
-are preserved on all copies.
-
-Permission is granted to copy and distribute modified versions of this
-manual under the conditions for verbatim copying, provided also that
-the entire resulting derived work is distributed under the terms of a
-permission notice identical to this one.
-
-Permission is granted to copy and distribute translations of this manual
-into another language, under the above conditions for modified versions.
-@end titlepage
-
-@node Top, ar, (dir), (dir)
-@chapter Introduction
-
-@cindex version
-This brief manual contains preliminary documentation for the GNU binary
-utilities (collectively version 1.90): 
-@table @code
-@item ar
-Create, modify, and extract from archives
-
-@item nm
-List symbols from object files
-
-@item objdump
-Display information from object files
-
-@item ranlib
-Generate index to archive contents
-
-@item size
-List section sizes and total size
-
-@item strip
-Discard symbols
-@end table
-
-@ifinfo
-Copyright @copyright{} 1991 Free Software Foundation, Inc.
-
-Permission is granted to make and distribute verbatim copies of
-this manual provided the copyright notice and this permission notice
-are preserved on all copies.
-
-@ignore
-Permission is granted to process this file through TeX and print the
-results, provided the printed document carries a copying permission
-notice identical to this one except for the removal of this paragraph
-(this paragraph not being relevant to the printed manual).
-
-@end ignore
-
-Permission is granted to copy and distribute modified versions of this
-manual under the conditions for verbatim copying, provided also that
-the entire resulting derived work is distributed under the terms of a
-permission notice identical to this one.
-
-Permission is granted to copy and distribute translations of this manual
-into another language, under the above conditions for modified versions.
-@end ifinfo
-
-@menu
-* ar::                          Create, modify, and extract from archives
-* ld::                          See ld.info
-* nm::                          List symbols from object files
-* objdump::                     Display information from object files
-* ranlib::                      Generate index to archive contents
-* size::                        List section sizes and total size
-* strip::                       Discard symbols
-* Index::
-@end menu
-
-@node ar, ld, Top, Top
-@chapter ar
-
-@kindex ar
-@cindex archives
-@cindex collections of files
-@smallexample
-  ar [-]@var{p}@var{mod} [ @var{membername} ] @var{archive} @var{files}@dots{}
-@end smallexample
-
-The GNU @code{ar} program creates, modifies, and extracts from
-archives.  An @dfn{archive} is a single file holding a collection of
-other files in a structure that makes it possible to retrieve
-the original individual files (called @dfn{members} of the archive).
-
-The original files' contents, mode (permissions), timestamp, owner, and
-group are preserved in the archive, and may be reconstituted on
-extraction.  
-
-@cindex name length
-GNU @code{ar} can maintain archives whose members have names of any
-length; however, depending on how @code{ar} is configured on your
-system, a limit on member-name length may be imposed (for compatibility
-with archive formats maintained with other tools).  If it exists, the
-limit is often 15 characters (typical of formats related to a.out) or 16
-characters (typical of formats related to coff).
-
-@cindex libraries
-@code{ar} is considered a binary utility because archives of this sort
-are most often used as @dfn{libraries} holding commonly needed
-subroutines.
-
-@cindex symbol index
-@code{ar} will create an index to the symbols defined in relocatable
-object modules in the archive when you specify the modifier @samp{s}.
-Once created, this index is updated in the archive whenever @code{ar}
-makes a change to its contents (save for the @samp{q} update operation).
-An archive with such an index speeds up linking to the library, and
-allows routines in the library to call each other without regard to
-their placement in the archive.
-
-You may use @samp{nm -s} or @samp{nm +print-armap} to list this index
-table.  If an archive lacks the table, another form of @code{ar} called
-@code{ranlib} can be used to add just the table.
-
-@code{ar} insists on at least two arguments to execute: one
-keyletter specifying the @emph{operation} (optionally accompanied by other
-keyletters specifying @emph{modifiers}), and the archive name to act on.
-
-Most operations can also accept further @var{files} arguments,
-specifying particular files to operate on.
-
-GNU @code{ar} allows you to mix the operation code @var{p} and modifier
-flags @var{mod} in any order, within the first command-line argument.
-
-If you wish, you may begin the first command-line argument with a
-dash.
-
-@cindex operations on archive
-The @var{p} keyletter specifies what operation to execute; it may be
-any of the following, but you must specify only one of them:
-
-@table @code
-@item d
-@cindex deleting from archive
-@emph{Delete} modules from the archive.  Specify the names of modules to
-be deleted as @var{files}; the archive is untouched if you
-specify no files to delete.
-
-If you specify the @samp{v} modifier, @code{ar} will list each module
-as it is deleted.
-
-@item m
-@cindex moving in archive
-Use this operation to @emph{move} members in an archive.
-
-The ordering of members in an archive can make a difference in how
-programs are linked using the library, if a symbol is defined in more
-than one member.  
-
-If no modifiers are used with @code{m}, any members you name in the
-@var{files} arguments are moved to the @emph{end} of the archive;
-you can use the @samp{a}, @samp{b}, or @samp{i} modifiers to move them to a
-specified place instead.
-
-@item p
-@cindex printing from archive
-@emph{Print} the specified members of the archive, to the standard
-output file.  If the @samp{v} modifier is specified, show the member
-name before copying its contents to standard output.
-
-If you specify no @var{files}, all the files in the archive are printed.
-
-@item q
-@cindex quick append to archive
-@emph{Quick append}; add @var{files} to the end of @var{archive},
-without checking for replacement.  
-
-The modifiers @samp{a}, @samp{b}, and @samp{i} do @emph{not} affect this
-operation; new members are always placed at the end of the archive.
-
-The modifier @samp{v} makes @code{ar} list each file as it is appended.
-
-Since the point of this operation is speed, the archive's symbol table
-index is not updated, even if it already existed; you can use @samp{ar s} or
-@code{ranlib} explicitly to update the symbol table index.
-
-@item r
-@cindex replacement in archive
-Insert @var{files} into @var{archive} (with @emph{replacement}). This
-operation differs from @samp{q} in that any previously existing members
-are deleted if their names match those being added.
-
-If one of the files named in @var{files} doesn't exist, @code{ar}
-displays an error message, and leaves undisturbed any existing members
-of the archive matching that name.
-
-By default, new members are added at the end of the file; but you may
-use one of the modifiers @samp{a}, @samp{b}, or @samp{i} to request
-placement relative to some existing member.
-
-The modifier @samp{v} used with this operation elicits a line of
-output for each file inserted, along with one of the letters @samp{a} or
-@samp{r} to indicate whether the file was appended (no old member
-deleted) or replaced.
-
-@item t
-@cindex contents of archive
-Display a @emph{table} listing the contents of @var{archive}, or those
-of the files listed in @var{files} that are present in the
-archive.  Normally only the member name is shown; if you also want to
-see the modes (permissions), timestamp, owner, group, and size, you can
-request that by also specifying the @samp{v} modifier.
-
-If you do not specify any @var{files}, all files in the archive
-are listed.
-
-@cindex repeated names in archive
-@cindex name duplication in archive
-If there is more than one file with the same name (say, @samp{fie}) in
-an archive (say @samp{b.a}), @samp{ar t b.a fie} will list only the
-first instance; to see them all, you must ask for a complete
-listing---in our example, @samp{ar t b.a}.
-@c WRS only; per Gumby, this is implementation-dependent, and in a more
-@c recent case in fact works the other way.
-
-@item x
-@cindex extract from archive
-@emph{Extract} members (named @var{files}) from the archive.  You can
-use the @samp{v} modifier with this operation, to request that
-@code{ar} list each name as it extracts it.
-
-If you do not specify any @var{files}, all files in the archive
-are extracted.
-
-@end table
-
-A number of modifiers (@var{mod}) may immediately follow the @var{p}
-keyletter, to specify variations on an operation's behavior:
-
-@table @code
-@item a
-@cindex relative placement in archive
-Add new files @emph{after} an existing member of the
-archive.  If you use the modifier @code{a}, the name of an existing archive
-member must be present as the @var{membername} argument, before the
-@var{archive} specification.
-
-@item b
-Add new files @emph{before} an existing member of the
-archive.  If you use the modifier @code{b}, the name of an existing archive
-member must be present as the @var{membername} argument, before the
-@var{archive} specification.  (same as @samp{i}).
-
-@item c
-@cindex creating archives
-@emph{Create} the archive.  The specified @var{archive} is always
-created if it didn't exist, when you request an update.  But a warning is
-issued unless you specify in advance that you expect to create it, by
-using this modifier.
-
-@item i
-Insert new files @emph{before} an existing member of the
-archive.  If you use the modifier @code{i}, the name of an existing archive
-member must be present as the @var{membername} argument, before the
-@var{archive} specification.  (same as @samp{b}).
-
-@item l
-This modifier is accepted but not used.
-@c whaffor ar l modifier??? presumably compat; with
-@c what???---pesch@@cygnus.com, 25jan91 
-
-@item o
-@cindex dates in archive
-Preserve the @emph{original} dates of members when extracting them.  If
-you do not specify this modifier, files extracted from the archive
-will be stamped with the time of extraction.
-
-@item s
-@cindex writing archive index
-Write an object-file index into the archive, or update an existing one,
-even if no other change is made to the archive.  You may use this modifier
-flag either with any operation, or alone.  Running @samp{ar s} on an
-archive is equivalent to running @samp{ranlib} on it.
-
-@item u
-@cindex updating an archive
-Normally, @code{ar r}@dots{} inserts all files
-listed into the archive.  If you would like to insert @emph{only} those
-of the files you list that are newer than existing members of the same
-names, use this modifier.  The @samp{u} modifier is allowed only for the
-operation @samp{r} (replace).  In particular, the combination @samp{qu} is
-not allowed, since checking the timestamps would lose any speed
-advantage from the operation @samp{q}.
-
-@item v
-This modifier requests the @emph{verbose} version of an operation.  Many
-operations display additional information, such as filenames processed,
-when the modifier @samp{v} is appended.
-
-@end table
-
-@node ld, nm, ar, Top
-@chapter ld
-@cindex linker
-@kindex ld
-The GNU linker @code{ld} is now described in a separate manual.
-@xref{Top,, Overview,, GLD: the GNU linker}.
-
-@node nm, objdump, ld, Top
-@chapter nm
-@cindex symbols
-@kindex nm
-
-@smallexample
-  nm [ -a | +debug-syms ]  [ -g | +extern-only ]
-      [ -s | +print-armap ]  [ -o | +print-file-name ]  
-      [ -n | +numeric-sort ]  [ -p | +no-sort ]
-      [ -r | +reverse-sort ]  [ -u | +undefined-only ]  
-      [ +target @var{bfdname} ]
-      [ @var{objfiles}@dots{} ]
-@end smallexample
-
-GNU @code{nm} will list the symbols from object files @var{objfiles}.
-
-The long and short forms of options, shown here as alternatives, are
-equivalent.
-
-@table @code
-@item @var{objfiles}@dots{}
-@kindex a.out
-Object files whose symbols are to be listed.  If no object files are
-listed as arguments, @code{nm} assumes @samp{a.out}.
-
-@item -a
-@itemx +debug-syms 
-@cindex debugging symbols
-Display debugger-only symbols; normally these are not listed.
-
-@item -g
-@itemx +extern-only 
-@cindex external symbols
-Display only external symbols.
-
-@item -p
-@itemx +no-sort 
-@cindex sorting symbols
-Don't bother to sort the symbols in any order; just print them in the
-order encountered.
-
-@item -n
-@itemx +numeric-sort 
-Sort symbols numerically by their addresses, not alphabetically by their
-names. 
-
-@item -s
-@itemx +print-armap
-@cindex symbol index, listing
-When listing symbols from archive members, include the index: a mapping
-(stored in the archive by @code{ar} or @code{ranlib}) of what modules
-contain definitions for what names.
-
-@item -o
-@itemx +print-file-name 
-@cindex input file name
-@cindex file name
-@cindex source file name
-Precede each symbol by the name of the input file where it was found,
-rather than identifying the input file once only before all of its
-symbols. 
-
-@item -r
-@itemx +reverse-sort 
-Reverse the sense of the sort (whether numeric or alphabetic); let the
-last come first.
-
-@item +target @var{bfdname}
-@c @item +target
-@cindex object code format
-Specify an object code format other than your system's default format.
-@xref{objdump}, for information on listing available formats.
-@c FIXME what *does* +target/no arg do?
-
-@item -u
-@itemx +undefined-only 
-@cindex external symbols
-@cindex undefined symbols
-Display only undefined symbols (those external to each object file).
-
-@end table
-
-@node objdump, ranlib, nm, Top
-@chapter objdump
-
-@cindex object file information
-@kindex objdump
-
-@smallexample
-  objdump [ -a ]  [ -b @var{bfdname} ]  [ -d ]  [ -f ]
-          [ -h | +header ]  [ -i ]  [ -j @var{section} ]  [ -l ]
-          [ -m @var{machine} ]  [ -r | +reloc ]  [ -s ]
-          [ -t | +syms ]  [ -x ]
-          @var{objfiles}@dots{}
-@end smallexample
-
-@code{objdump} displays information about one or more object files.
-The options control what particular information to display.  This
-information is mostly useful to programmers who are working on the
-compilation tools, as opposed to programmers who just want their
-program to compile and work.
-
-The long and short forms of options, shown here as alternatives, are
-equivalent.
-
-@table @code
-@item @var{objfiles}@dots{}
-The object files to be examined.  When you specify archives,
-@code{objdump} shows information on each of the member object files.
-
-@item -a
-@c print_arelt_descr
-@cindex archive headers
-If any files from @var{objfiles} are archives, display the archive
-header information (in a format similar to @samp{ls -l}).  Besides the
-information you could list with @samp{ar tv}, @samp{objdump -a} shows
-the object file format of each archive member.
-
-@c suggest longname +target or +format or +bfd
-@item -b @var{bfdname}
-@cindex object code format
-You can specify a particular object-code format for your object files as
-@var{bfdname}.  This may not be necessary; @var{objdump} can
-automatically recognize many formats.  For example,
-@example
-objdump -b oasys -m vax -h fu.o
-@end example
-@noindent
-Displays summary information from the section headers (@samp{-h}) of
-@file{fu.o}, which is explicitly identified (@samp{-m}) as a Vax object
-file in the format produced by Oasys compilers.  You can list the
-formats available with the @samp{-i} option.
-
-@item -d
-@cindex disassembling object code
-@cindex machine instructions
-Disassemble.  Display the assembler mnemonics for the machine
-instructions from @var{objfiles}.
-
-@item -f
-@cindex object file header
-File header.  Display summary information from the overall header of
-each file in @var{objfiles}.
-
-@item -h
-@itemx +header
-@cindex section headers
-Header.  Display summary information from the section headers of the
-object file.
-
-@item -i
-@cindex architectures available
-@cindex object formats available
-Display a list showing all architectures and object formats available
-for specification with @code{-b} or @code{-m}.
-
-@c suggest longname +section
-@item -j @var{name}
-@cindex section information
-Display information only for section @var{name}
-
-@c suggest longname +label or +linespec
-@item -l
-@cindex source filenames for object files
-Label the display (using debugging information) with the source filename
-and line numbers corresponding to the object code shown.
-
-@c suggest longname +architecture
-@item -m @var{machine}
-@cindex architecture
-Specify the object files @var{objfiles} are for architecture
-@var{machine}.  You can list available architectures using the @samp{-i}
-option. 
-
-@item -r
-@itemx +reloc
-@cindex relocation entries, in object file
-Relocation.  Print the relocation entries of the file.
-
-@item -s
-@cindex sections, full contents
-@cindex object file sections
-Display the full contents of any sections requested.
-
-@item -t
-@itemx +syms
-@cindex symbol table entries, printing
-Symbol Table.  Print the symbol table entries of the file.
-This is similar to the information provided by the @samp{nm} program.
-
-@item -x
-@cindex all header information, object file
-@cindex header information, all
-Display all available header information, including the symbol table and
-relocation entries.  Using @samp{-x} is equivalent to specifying all of
-@samp{-a -f -h -r -t}.
-
-@end table
-
-@node ranlib, size, objdump, Top
-@chapter ranlib
-
-@kindex ranlib
-@cindex archive contents
-@cindex symbol index
-
-@smallexample
-  ranlib @var{archive}
-@end smallexample
-
-@code{ranlib} generates an index to the contents of an archive, and
-stores it in the archive.  The index lists each symbol defined by a
-member of an archive that is a relocatable object file.  
-
-You may use @samp{nm -s} or @samp{nm +print-armap} to list this index.
-
-An archive with such an index speeds up linking to the library, and
-allows routines in the library to call each other without regard to
-their placement in the archive.
-
-The GNU @code{ranlib} program is another form of GNU @code{ar}; running
-@code{ranlib} is completely equivalent to executing @samp{ar -s}.
-@xref{ar}.
-
-@node size, strip, ranlib, Top
-@chapter size
-
-@kindex size
-@cindex section sizes
-
-@smallexample
-  size [ -A | -B | +format @var{compatibility} ]
-       [ +help ]  [ -d | -o | -x | +radix @var{number} ]
-       [ +target @var{bfdname} ]  [ -V | +version ]  
-       @var{objfiles}@dots{}
-@end smallexample
-
-The GNU @code{size} utility lists the section sizes---and the total
-size---for each of the object files @var{objfiles} in its argument list.
-By default, one line of output is generated for each object file or each
-module in an archive.
-
-The command line options have the following meanings:
-@table @code
-@item @var{objfiles}@dots{}
-The object files to be examined.
-
-@item -A
-@itemx -B
-@itemx +format @var{compatibility}
-@cindex size display format
-Using one of these options, you can choose whether the output from GNU
-@code{size} resembles output from System V @code{size} (using @samp{-A},
-or @samp{+format sysv}), or Berkeley @code{size} (using @samp{-B}, or
-@samp{+format berkeley}).  The default is the one-line format similar to
-Berkeley's.  
-@c Bonus for doc-source readers: you can also say +format=strange (or
-@c anything else that starts with 's') for sysv, and +format=boring (or
-@c anything else that starts with 'b') for Berkeley.
-
-Here is an example of the Berkeley (default) format of output from
-@code{size}: 
-@smallexample
- eg$  size +format Berkeley ranlib size
-text    data    bss     dec     hex     filename
-294880  81920   11592   388392  5ed28   ranlib
-294880  81920   11888   388688  5ee50   size
-@end smallexample
-
-@noindent
-This is the same data, but displayed closer to System V conventions:
-
-@smallexample
- eg$  size +format SysV ranlib size
-ranlib  :
-section         size         addr
-.text         294880         8192       
-.data          81920       303104       
-.bss           11592       385024       
-Total         388392    
-
-
-size  :
-section         size         addr
-.text         294880         8192       
-.data          81920       303104       
-.bss           11888       385024       
-Total         388688    
-@end smallexample
-
-@item +help
-Show a summary of acceptable arguments and options.
-
-@item -d
-@itemx -o
-@itemx -x
-@itemx +radix @var{number}
-@cindex size number format
-@cindex radix for section sizes
-Using one of these options, you can control whether the size of each
-section is given in decimal (@samp{-d}, or @samp{+radix 10}); octal
-(@samp{-o}, or @samp{+radix 8}); or hexadecimal (@samp{-x}, or
-@samp{+radix 16}).  In @samp{+radix @var{number}}, only the three
-values (8, 10, 16) are supported.  The total size is always given in two
-radices; decimal and hexadecimal for @samp{-d} or @samp{-x} output, or
-octal and hexadecimal if you're using @samp{-o}.
-
-@item +target @var{bfdname}
-@cindex object code format
-You can specify a particular object-code format for @var{objfiles} as
-@var{bfdname}.  This may not be necessary; @var{size} can
-automatically recognize many formats.  @xref{objdump}, for information
-on listing available formats.
-
-@item -V
-@itemx +version
-Display version number information on @code{size} itself.
-
-@end table
-
-@node strip, Index, size, Top
-@chapter strip
-
-@kindex strip
-@cindex removing symbols
-@cindex discarding symbols
-
-@smallexample
-  strip [ -s | +strip-all ]  [ -g | -S | +strip-debug ]
-         [ -x | +discard-all ]  [ -X | +discard-locals ]
-         [ -T @var{bfdname} ]
-         @var{objfiles}@dots{}
-@end smallexample
-
-GNU @code{strip} will discard all symbols from object files
-@var{objfiles}, if no options are specified; or only certain symbols,
-depending on its command-line options.
-
-@code{strip} will not execute unless at least one object file is listed.
-
-@quotation
-@emph{WARNING:} @code{strip} modifies the files named in its argument,
-rather than writing modified copies under different names.
-@end quotation
-
-The long and short forms of options, shown here as alternatives, are
-equivalent.
-
-@table @code
-@item -s
-@itemx +strip-all 
-@cindex all symbols, discarding
-This is the default case: strip all symbol entries from @var{objfiles}.
-
-@item -g
-@itemx -S
-@itemx +strip-debug 
-@cindex debugging symbols, discarding
-Discard only debugging symbol information from @var{objfiles}.
-
-@item -x
-@itemx +discard-all 
-@cindex local symbols, discarding
-Discard all symbols local to each file in @var{objfiles}.
-@emph{WARNING:} Note that @code{+discard-all} discards only @emph{local}
-symbols, in spite of its name.
-
-@item -X
-@itemx +discard-locals 
-Discard local symbols starting with @samp{L} from each file in
-@var{objfiles}.  (Some compilers produce internally-used symbols that
-begin with @samp{L}.)
-
-@item -T @var{bfdname}
-@cindex object code format
-You can specify a particular object-code format @var{bfdname} for
-@var{objfiles}.  This may not be necessary; @var{strip} can automatically
-recognize many formats.  @xref{objdump}, for information on listing
-available formats.
-@end table
-
-@node Index, , strip, Top
-@unnumbered Index
-
-@printindex cp
-
-@contents
-@bye
diff --git a/binutils/config.sub b/binutils/config.sub
deleted file mode 100755 (executable)
index dac9ab8..0000000
+++ /dev/null
@@ -1,446 +0,0 @@
-#!/bin/sh
-
-# Configuration subroutine to validate and canonicalize a configuration type.
-# Supply the specified configuration type as an argument.
-# If it is invalid, we print an error message on stderr and exit with code 1.
-# Otherwise, we print the canonical config type on stdout and succeed.
-
-# This file is supposed to be the same for all GNU packages
-# and recognize all the CPU types, system types and aliases
-# that are meaningful with *any* GNU software.
-# Each package is responsible for reporting which valid configurations
-# it does not support.  The user should be able to distinguish
-# a failure to support a valid configuration from a meaningless
-# configuration (e.g. a typo).
-
-# Please email any bugs, comments, and/or additions to this file to:
-# configure@cygnus.com
-
-# decode aliases into canonical names
-
-case "$1" in
-# cpu alone is a valid alias for cpu-none-none.
-vax | tahoe | i386 | i860 | m68k | m68000 | m88k | sparc | ns32k \
-       | alliant | arm | c1 | c2 | mips | pyramid | tron | a29k \
-       | romp | rs6000 | i960 | h8300)
-       cpu=$1
-       vendor=none
-       os=none
-       ;;
-altos | altos3068)
-       cpu=m68k
-       vendor=altos
-       os=sysv # maybe?
-       ;;
-altosgas)
-       cpu=m68k
-       vendor=altos
-       os=gas
-       ;;
-am29k)
-       cpu=a29k
-       vendor=none
-       os=bsd
-       ;;
-amdahl)
-       cpu=580
-       vendor=amdahl
-       os=uts
-       ;;
-amigados)
-       cpu=m68k
-       vendor=cbm
-       os=amigados # Native AmigaDOS
-       ;;
-amigaunix | amix)
-       cpu=m68k
-       vendor=cbm
-       os=svr4 # System V Release 4 (svr4 is an industry recognized acronym)
-       ;;
-apollo68)
-       cpu=m68k
-       vendor=apollo
-       os=sysv # maybe?
-       ;;
-balance)
-       cpu=ns32k
-       vendor=sequent
-       os=dynix
-       ;;
-convex-c1)
-       cpu=c1
-       vendor=convex
-       os=sysv # maybe?
-       ;;
-convex-c2)
-       cpu=c2
-       vendor=convex
-       os=sysv # maybe?
-       ;;
-cray | ymp)
-       cpu=ymp
-       vendor=cray
-       os=unicos
-       ;;
-cray2)
-       cpu=cray2
-       vendor=cray
-       os=unicos
-       ;;
-dec3100 | decstatn | decstation | decstation-3100 | pmax | pmin)
-       cpu=mips
-       vendor=dec
-       os=ultrix
-       ;;
-delta | 3300 | motorola-3300 | motorola-delta \
-      | 3300-motorola | delta-motorola)
-       cpu=m68k
-       vendor=motorola
-       os=sysv # maybe?
-       ;;
-
-delta88)
-       cpu=m88k
-       vendor=motorola
-       os=m88kbcs
-       ;;
-
-gmicro)
-       cpu=tron
-       vendor=gmicro
-       os=sysv # maybe?
-       ;;
-
-h8300hds)
-       cpu=h8300
-       vendor=hitachi
-       os=hds
-       ;;
-
-# start-sanitize-v9
-hal-32 | hal32)
-       cpu=sparc64
-       vendor=hal
-       os=hal32
-       ;;
-hal-64 | hal64)
-       cpu=sparc64
-       vendor=hal
-       os=hal64
-       ;;
-sparc64)
-       cpu=sparc64
-       vendor=sun
-       os=v9
-       ;;
-sparc64-v7 | sparc64v7)
-       cpu=sparc64
-       vendor=sun
-       os=v7
-       ;;
-# end-sanitize-v9
-hp300bsd)
-       cpu=m68k
-       vendor=hp
-       os=bsd
-       ;;
-hp300hpux | hpux | hp9k3[2-9][0-9])
-       cpu=m68k
-       vendor=hp
-       os=hpux
-       ;;
-hp9k31[0-9] | hp9k2[0-9][0-9])
-       cpu=m68000
-       vendor=hp
-       os=hpux
-       ;;
-i386sco)
-       cpu=i386
-       vendor=sco
-       os=sysv # maybe?
-       ;;
-i386v)
-       cpu=i386
-       vendor=none
-       os=sysv
-       ;;
-i386v32)
-       cpu=i386
-       vendor=none
-       os=sysv32
-       ;;
-iris | iris4d)
-       cpu=mips
-       vendor=sgi
-       os=irix # maybe?
-       ;;
-
-dpx2)
-       vendor=bull
-       cpu=m68k
-       os=sysv
-       ;;
-isi | isi68)
-       cpu=m68k
-       vendor=isi
-       os=sysv # maybe?
-       ;;
-littlemips)
-       cpu=mips
-       vendor=little
-       os=bsd
-       ;;
-magnum | m3230)
-       cpu=mips
-       vendor=mips
-       os=sysv # maybe?
-       ;;
-merlin)
-       cpu=ns32k
-       vendor=utek
-       os=sysv # maybe?
-       ;;
-miniframe)
-       cpu=m68000
-       vendor=convergent
-       os=sysv # maybe?
-       ;;
-mmax)
-       cpu=ns32k
-       vendor=encore
-       os=sysv # maybe?
-       ;;
-news | news700 | news800 | news900)
-       cpu=m68k
-       vendor=sony
-       os=newsos3 # Based on bsd-4.3
-       ;;
-news1000)
-       cpu=m68030
-       vendor=sony
-       os=newsos3 # ?
-       ;;
-news-3600 | bigmips | risc-news)
-       cpu=mips
-       vendor=sony
-       os=newsos4 # Presumably?
-       ;;
-next)
-       cpu=m68k
-       vendor=next
-       os=sysv # maybe?
-       ;;
-nindy960)
-       cpu=i960
-       vendor=intel
-       os=nindy
-       ;;
-none)
-       cpu=none
-       vendor=none
-       os=none
-       ;;
-np1)
-       cpu=np1
-       vendor=gould
-       os=sysv # maybe?
-       ;;
-rtpc)
-       cpu=romp
-       vendor=ibm
-       os=aix # maybe?
-       ;;      
-pbd)
-       cpu=sparc
-       vendor=unicom
-       os=sysv
-       ;;
-pn)
-       cpu=pn
-       vendor=gould
-       os=sysv # maybe?
-       ;;
-ps2)
-       cpu=i386
-       vendor=ibm
-       os=sysv # maybe?
-       ;;
-sun2)
-       cpu=m68000
-       vendor=sun
-       os=sunos4
-       ;;
-sun2os3)
-       cpu=m68000
-       vendor=sun
-       os=sunos3
-       ;;
-sun2os4)
-       cpu=m68000
-       vendor=sun
-       os=sunos4
-       ;;
-sun3)
-       cpu=m68k
-       vendor=sun
-       os=sunos4
-       ;;
-sun3os3)
-       cpu=m68k
-       vendor=sun
-       os=sunos3
-       ;;
-sun3os4)
-       cpu=m68k
-       vendor=sun
-       os=sunos4
-       ;;
-sun386 | roadrunner | sun386i)
-       cpu=i386
-       vendor=sun
-       os=sunos
-       ;;
-sun4)
-       cpu=sparc
-       vendor=sun
-       os=sunos4
-       ;;
-sun4os3)
-       cpu=sparc
-       vendor=sun
-       os=sunos3
-       ;;
-sun4os4)
-       cpu=sparc
-       vendor=sun
-       os=sunos4
-       ;;
-symmetry)
-       cpu=i386
-       vendor=sequent
-       os=dynix
-       ;;
-tower | tower-32)
-       cpu=m68k
-       vendor=ncr
-       os=sysv # maybe?
-       ;;
-ultra3)
-       cpu=a29k
-       vendor=nyu
-       os=sym1
-       ;;
-umax)
-       cpu=ns32k
-       vendor=encore
-       os=sysv # maybe?
-       ;;
-unixpc | safari | pc7300 | 3b1 | 7300 | 7300-att | att-7300)
-       cpu=m68k
-       vendor=att
-       os=sysv # maybe?
-       ;;
-vax-dec)
-       cpu=vax
-       vendor=dec
-       os=ultrix # maybe?
-       ;;
-vxworks68)
-       cpu=m68k
-       vendor=wrs
-       os=vxworks
-       ;;
-vxworks960)
-       cpu=i960
-       vendor=wrs
-       os=vxworks
-       ;;
-xmp)
-       cpu=xmp
-       vendor=cray
-       os=unicos
-       ;;
-# not an alias.  parse what we expect to be a canonical name.
-*)
-       cpu=`echo $1 | sed 's/-.*$//'`
-
-       if [ "${cpu}" = "$1" ] ; then
-               # no vendor so this is an invalid name.
-               echo '***' No vendor: configuration \`$1\' not recognized 1>&2
-               exit 1
-       else
-               # parse out vendor
-               rest=`echo $1 | sed "s/${cpu}-//"`
-               vendor=`echo ${rest} | sed 's/-.*$//'`
-
-               if [ "${vendor}" = "${rest}" ] ; then
-                       # a missing os is acceptable
-                       os=none
-               else
-                       os=`echo ${rest} | sed "s/${vendor}-//"`
-               fi
-       fi
-       ;;
-esac
-
-# At this point we should have three parts of a canonical name in cpu,
-# vendor, and os.
-
-# verify that the cpu is known.
-
-case "${cpu}" in
-none | vax | tahoe | i386 | i860 | m68k | m68000 | m88k | sparc \
-       | ns32k | alliant | arm | c1 | c2 | mips | pyramid | tron \
-       | a29k | romp | rs6000 | i960 | xmp | ymp | cray2 | 580 | h8300)
-       ;;
-
-# start-sanitize-v9
-sparc64) ;;
-# end-sanitize-v9
-
-*)
-       echo '***' Invalid cpu \`${cpu}\': configuration \`$1\' not recognized 1>&2
-       exit 1
-       ;;
-esac
-
-# verify that the vendor is known.
-
-case "${vendor}" in
-       altos | amdahl | aout | apollo | att | bcs | bout |\
-       cbm | convergent | convex | coff | cray | dec | encore |\
-       gould | hitachi | intel | isi | hp | ibm | little | mips | motorola |\
-       ncr | next | none | nyu | sco | sequent | sgi | sony | sun |\
-       unicom | utek | wrs | bull ) ;; 
-
-# start-sanitize-v9
-hal) ;;
-# end-sanitize-v9
-
-*)
-       echo '***' Invalid vendor \`${vendor}\': configuration \`$1\' not recognized 1>&2
-       exit 1
-       ;;
-esac
-
-# verify that the os is known, if it exists.
-
-case "${os}" in
-aix* | aout | bout | bsd* | coff | ctix* | dynix* | esix* | hpux* \
-       | hds | irix* | isc* | kern | mach* | newsos* | nindy* | none \
-       | osf* | sco* | sunos* | sysv* | ultrix* | unos* | v88r* \
-       | vms* | vxworks* | sym[1-9]* | unicos* | uts | svr4 \
-       | amigados) 
-       ;;
-
-# start-sanitize-v9
-hal32 | hal64 | v7 | v9) ;;
-# end-sanitize-v9
-
-*)
-       echo '***' Invalid os \`${os}\': configuration \`$1\' not recognized 1>&2
-       exit 1
-       ;;
-esac
-
-echo ${cpu}-${vendor}-${os}
diff --git a/binutils/configdos.bat b/binutils/configdos.bat
deleted file mode 100755 (executable)
index 2702dd0..0000000
+++ /dev/null
@@ -1,6 +0,0 @@
-@echo off
-@echo Configuring binutils for H8/300, hosted on MS-DOS
-
-copy ..\bfd\hosts\h-go32.h sysdep.h
-
-copy makefile.dos makefile
diff --git a/binutils/cplus-dem.c b/binutils/cplus-dem.c
deleted file mode 100644 (file)
index 22a38ba..0000000
+++ /dev/null
@@ -1,934 +0,0 @@
-/* Demangler for GNU C++ 
-   Copyright (C) 1989 Free Software Foundation, Inc.
-   written by James Clark (jjc@jclark.uucp)
-   
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
-   any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software
-   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-/* This is for g++ 1.36.1 (November 6 version). It will probably
-   require changes for any other version.
-
-   Modified for g++ 1.36.2 (November 18 version).  */
-
-/* This file exports one function
-
-   char *cplus_demangle (const char *name)
-   
-   If `name' is a mangled function name produced by g++, then
-   a pointer to a malloced string giving a C++ representation
-   of the name will be returned; otherwise NULL will be returned.
-   It is the caller's responsibility to free the string which
-   is returned.
-
-   For example,
-   
-   cplus_demangle ("_foo__1Ai")
-   
-   returns
-
-   "A::foo(int)"
-
-   This file imports xmalloc and xrealloc, which are like malloc and
-   realloc except that they generate a fatal error if there is no
-   available memory. */
-
-#if 0                          /* Should really be part of BFD */
-#define nounderscore 1         /* define this is names don't start with _ */
-#endif
-#include "bfd.h"
-#include "sysdep.h"
-
-#include <ctype.h>
-
-#ifndef __STDC__
-#define const
-#endif
-
-#ifdef __STDC__
-extern char *cplus_demangle (const char *type);
-#else
-extern char *cplus_demangle ();
-#endif
-
-static char **typevec = 0;
-static int ntypes = 0;
-static int typevec_size = 0;
-
-static struct {
-  const char *in;
-  const char *out;
-} optable[] = {
-  "new", " new",
-  "delete", " delete",
-  "ne", "!=",
-  "eq", "==",
-  "ge", ">=",
-  "gt", ">",
-  "le", "<=",
-  "lt", "<",
-  "plus", "+",
-  "minus", "-",
-  "mult", "*",
-  "convert", "+",      /* unary + */
-  "negate", "-",       /* unary - */
-  "trunc_mod", "%",
-  "trunc_div", "/",
-  "truth_andif", "&&",
-  "truth_orif", "||",
-  "truth_not", "!",
-  "postincrement", "++",
-  "postdecrement", "--",
-  "bit_ior", "|",
-  "bit_xor", "^",
-  "bit_and", "&",
-  "bit_not", "~",
-  "call", "()",
-  "cond", "?:",
-  "alshift", "<<",
-  "arshift", ">>",
-  "component", "->",
-  "indirect", "*",
-  "method_call", "->()",
-  "addr", "&",         /* unary & */
-  "array", "[]",
-  "nop", "",                   /* for operator= */
-};
-
-/* Beware: these aren't '\0' terminated. */
-
-typedef struct {
-  char *b;                     /* pointer to start of string */
-  char *p;                     /* pointer after last character */
-  char *e;                     /* pointer after end of allocated space */
-} string;
-
-#ifdef __STDC__
-static void string_need (string *s, int n);
-static void string_delete (string *s);
-static void string_init (string *s);
-static void string_clear (string *s);
-static int string_empty (string *s);
-static void string_append (string *p, const char *s);
-static void string_appends (string *p, string *s);
-static void string_appendn (string *p, const char *s, int n);
-static void string_prepend (string *p, const char *s);
-#if 0
-static void string_prepends (string *p, string *s);
-#endif
-static void string_prependn (string *p, const char *s, int n);
-static int get_count (const char **type, int *count);
-static int do_args (const char **type, string *decl);
-static int do_type (const char **type, string *result);
-static int do_arg (const char **type, string *result);
-static int do_args (const char **type, string *decl);
-static void munge_function_name (string *name);
-#else
-static void string_need ();
-static void string_delete ();
-static void string_init ();
-static void string_clear ();
-static int string_empty ();
-static void string_append ();
-static void string_appends ();
-static void string_appendn ();
-static void string_prepend ();
-static void string_prepends ();
-static void string_prependn ();
-static int get_count ();
-static int do_args ();
-static int do_type ();
-static int do_arg ();
-static int do_args ();
-static void munge_function_name ();
-#endif
-
-char *
-cplus_demangle (type)
-     const char *type;
-{
-  string decl;
-  int n;
-  int success = 0;
-  int constructor = 0;
-  int const_flag = 0;
-  int i;
-  const char *p, *premangle;
-
-  if (type == NULL || *type == '\0')
-    return NULL;
-#ifndef nounderscore
-  if (*type++ != '_')
-    return NULL;
-#endif
-  p = type;
-  while (*p != '\0' && !(*p == '_' && p[1] == '_'))
-    p++;
-  if (*p == '\0')
-    {
-      /* destructor */
-      if (type[0] == '_' && type[1] == '$' && type[2] == '_')
-       {
-         unsigned int l = (strlen (type) - 3)*2 + 3 + 2 + 1;
-         char *tem = (char *) xmalloc (l);
-         strcpy (tem, type + 3);
-         strcat (tem, "::~");
-         strcat (tem, type + 3);
-         strcat (tem, "()");
-         return tem;
-       }
-      /* static data member */
-      if (*type != '_' && (p = (char *) strchr (type, '$')) != NULL)
-       {
-         int n = strlen (type) + 2;
-         char *tem = (char *) xmalloc (n);
-         memcpy (tem, type, p - type);
-         strcpy (tem + (p - type), "::");
-         strcpy (tem + (p - type) + 2, p + 1);
-         return tem;
-       }
-      /* virtual table */
-      if (type[0] == '_' && type[1] == 'v' && type[2] == 't' && type[3] == '$')
-       {
-         int n = strlen (type + 4) + 14 + 1;
-         char *tem = (char *) xmalloc (n);
-         strcpy (tem, type + 4);
-         strcat (tem, " virtual table");
-         return tem;
-       }
-      return NULL;
-    }
-
-  string_init (&decl);
-
-  if (p == type)
-    {
-      if (!isdigit (p[2]))
-       {
-         string_delete (&decl);
-         return NULL;
-       }
-      constructor = 1;
-    }
-  else
-    {
-      string_appendn (&decl, type, p - type);
-      munge_function_name (&decl);
-    }
-  p += 2;
-
-  premangle = p;
-  switch (*p)
-    {
-    case 'C':
-      /* a const member function */
-      if (!isdigit (p[1]))
-       {
-         string_delete (&decl);
-         return NULL;
-       }
-      p += 1;
-      const_flag = 1;
-      /* fall through */
-    case '0':
-    case '1':
-    case '2':
-    case '3':
-    case '4':
-    case '5':
-    case '6':
-    case '7':
-    case '8':
-    case '9':
-      n = 0;
-      do
-       {
-         n *= 10;
-         n += *p - '0';
-         p += 1;
-       }
-      while (isdigit (*p));
-      if (strlen (p) < n)
-       {
-         string_delete (&decl);
-         return NULL;
-       }
-      if (constructor)
-       {
-         string_appendn (&decl, p, n);
-         string_append (&decl, "::");
-         string_appendn (&decl, p, n);
-       }
-      else
-       {
-         string_prepend (&decl, "::");
-         string_prependn (&decl, p, n);
-       }
-#ifndef LONGERNAMES
-      p = premangle;
-#else
-      p += n;
-#endif
-      success = do_args (&p, &decl);
-      if (const_flag)
-       string_append (&decl, " const");
-      break;
-    case 'F':
-      p += 1;
-      success = do_args (&p, &decl);
-      break;
-    }
-
-  for (i = 0; i < ntypes; i++)
-    if (typevec[i] != NULL)
-      free (typevec[i]);
-  ntypes = 0;
-  if (typevec != NULL)
-    {
-      free ((char *)typevec);
-      typevec = NULL;
-      typevec_size = 0;
-    }
-
-  if (success)
-    {
-      string_appendn (&decl, "", 1);
-      return decl.b;
-    }
-  else
-    {
-      string_delete (&decl);
-      return NULL;
-    }
-}
-
-static int
-get_count (type, count)
-     const char **type;
-     int *count;
-{
-  if (!isdigit (**type))
-    return 0;
-  *count = **type - '0';
-  *type += 1;
-  /* see flush_repeats in cplus-method.c */
-  if (isdigit (**type))
-    {
-      const char *p = *type;
-      int n = *count;
-      do 
-       {
-         n *= 10;
-         n += *p - '0';
-         p += 1;
-       } 
-      while (isdigit (*p));
-      if (*p == '_')
-       {
-         *type = p + 1;
-         *count = n;
-       }
-    }
-  return 1;
-}
-
-/* result will be initialised here; it will be freed on failure */
-
-static int
-do_type (type, result)
-     const char **type;
-     string *result;
-{
-  int n;
-  int done;
-  int non_empty = 0;
-  int success;
-  string decl;
-  const char *remembered_type;
-
-  string_init (&decl);
-  string_init (result);
-
-  done = 0;
-  success = 1;
-  while (success && !done)
-    {
-      int member;
-      switch (**type)
-       {
-       case 'P':
-         *type += 1;
-         string_prepend (&decl, "*");
-         break;
-
-       case 'R':
-         *type += 1;
-         string_prepend (&decl, "&");
-         break;
-
-       case 'T':
-         *type += 1;
-         if (!get_count (type, &n) || n >= ntypes)
-           success = 0;
-         else
-           {
-             remembered_type = typevec[n];
-             type = &remembered_type;
-           }
-         break;
-
-       case 'F':
-         *type += 1;
-         if (!string_empty (&decl) && decl.b[0] == '*')
-           {
-             string_prepend (&decl, "(");
-             string_append (&decl, ")");
-           }
-         if (!do_args (type, &decl) || **type != '_')
-           success = 0;
-         else
-           *type += 1;
-         break;
-
-       case 'M':
-       case 'O':
-         {
-           int constp = 0;
-           int volatilep = 0;
-
-           member = **type == 'M';
-           *type += 1;
-           if (!isdigit (**type))
-             {
-               success = 0;
-               break;
-             }
-           n = 0;
-           do
-             {
-               n *= 10;
-               n += **type - '0';
-               *type += 1;
-             } 
-           while (isdigit (**type));
-           if (strlen (*type) < n)
-             {
-               success = 0;
-               break;
-             }
-           string_append (&decl, ")");
-           string_prepend (&decl, "::");
-           string_prependn (&decl, *type, n);
-           string_prepend (&decl, "(");
-           *type += n;
-           if (member)
-             {
-               if (**type == 'C')
-                 {
-                   *type += 1;
-                   constp = 1;
-                 }
-               if (**type == 'V')
-                 {
-                   *type += 1;
-                   volatilep = 1;
-                 }
-               if (*(*type)++ != 'F')
-                 {
-                   success = 0;
-                   break;
-                 }
-             }
-           if ((member && !do_args (type, &decl)) || **type != '_')
-             {
-               success = 0;
-               break;
-             }
-           *type += 1;
-           if (constp)
-             {
-               if (non_empty)
-                 string_append (&decl, " ");
-               else
-                 non_empty = 1;
-               string_append (&decl, "const");
-             }
-           if (volatilep)
-             {
-               if (non_empty)
-                 string_append (&decl, " ");
-               else
-                 non_empty = 1;
-               string_append (&decl, "volatilep");
-             }
-           break;
-         }
-
-       case 'C':
-         if ((*type)[1] == 'P')
-           {
-             *type += 1;
-             if (!string_empty (&decl))
-               string_prepend (&decl, " ");
-             string_prepend (&decl, "const");
-             break;
-           }
-
-         /* fall through */
-       default:
-         done = 1;
-         break;
-       }
-    }
-
-  done = 0;
-  non_empty = 0;
-  while (success && !done)
-    {
-      switch (**type)
-       {
-       case 'C':
-         *type += 1;
-         if (non_empty)
-           string_append (result, " ");
-         else
-           non_empty = 1;
-         string_append (result, "const");
-         break;
-       case 'U':
-         *type += 1;
-         if (non_empty)
-           string_append (result, " ");
-         else
-           non_empty = 1;
-         string_append (result, "unsigned");
-         break;
-       case 'V':
-         *type += 1;
-         if (non_empty)
-           string_append (result, " ");
-         else
-           non_empty = 1;
-         string_append (result, "volatile");
-         break;
-       default:
-         done = 1;
-         break;
-       }
-    }
-
-  if (success)
-    switch (**type)
-      {
-      case '\0':
-      case '_':
-       break;
-      case 'v':
-       *type += 1;
-       if (non_empty)
-         string_append (result, " ");
-       string_append (result, "void");
-       break;
-      case 'l':
-       *type += 1;
-       if (non_empty)
-         string_append (result, " ");
-       string_append (result, "long");
-       break;
-      case 'i':
-       *type += 1;
-       if (non_empty)
-         string_append (result, " ");
-       string_append (result, "int");
-       break;
-      case 's':
-       *type += 1;
-       if (non_empty)
-         string_append (result, " ");
-       string_append (result, "short");
-       break;
-      case 'c':
-       *type += 1;
-       if (non_empty)
-         string_append (result, " ");
-       string_append (result, "char");
-       break;
-      case 'r':
-       *type += 1;
-       if (non_empty)
-         string_append (result, " ");
-       string_append (result, "long double");
-       break;
-      case 'd':
-       *type += 1;
-       if (non_empty)
-         string_append (result, " ");
-       string_append (result, "double");
-       break;
-      case 'f':
-       *type += 1;
-       if (non_empty)
-         string_append (result, " ");
-       string_append (result, "float");
-       break;
-      case 'G':
-       *type += 1;
-       if (!isdigit (**type))
-         {
-           success = 0;
-           break;
-         }
-       /* fall through */
-      case '0':
-      case '1':
-      case '2':
-      case '3':
-      case '4':
-      case '5':
-      case '6':
-      case '7':
-      case '8':
-      case '9':
-       n = 0;
-       do
-         {
-           n *= 10;
-           n += **type - '0';
-           *type += 1;
-         }
-       while (isdigit (**type));
-       if (strlen (*type) < n)
-         {
-           success = 0;
-           break;
-         }
-       if (non_empty)
-         string_append (result, " ");
-       string_appendn (result, *type, n);
-       *type += n;
-       break;
-      default:
-       success = 0;
-       break;
-      }
-
-  if (success)
-    {
-      if (!string_empty (&decl))
-       {
-         string_append (result, " ");
-         string_appends (result, &decl);
-       }
-      string_delete (&decl);
-      return 1;
-    }
-  else
-    {
-      string_delete (&decl);
-      string_delete (result);
-      return 0;
-    }
-}
-
-/* `result' will be initialised in do_type; it will be freed on failure */
-
-static int
-do_arg (type, result)
-     const char **type;
-     string *result;
-{
-  char *tem;
-  int len;
-  const char *start;
-  const char *end;
-
-  start = *type;
-  if (!do_type (type, result))
-    return 0;
-  end = *type;
-  if (ntypes >= typevec_size)
-    {
-      if (typevec_size == 0)
-       {
-         typevec_size = 3;
-         typevec = (char **) xmalloc (sizeof (char*)*typevec_size);
-       }
-      else
-       {
-         typevec_size *= 2;
-         typevec = (char **) xrealloc ((char *)typevec, sizeof (char*)*typevec_size);
-       }
-    }
-  len = end - start;
-  tem = (char *) xmalloc (len + 1);
-  memcpy (tem, start, len);
-  tem[len] = '\0';
-  typevec[ntypes++] = tem;
-  return 1;
-}
-
-/* `decl' must be already initialised, usually non-empty;
-   it won't be freed on failure */
-
-static int
-do_args (type, decl)
-     const char **type;
-     string *decl;
-{
-  string arg;
-  int need_comma = 0;
-  int dont_want_first;
-
-#ifndef LONGERNAMES
-  dont_want_first = 1;
-#else
-  dont_want_first = 0;
-#endif
-
-  string_append (decl, "(");
-
-  while (**type != '_' && **type != '\0' && **type != 'e' && **type != 'v')
-    {
-      if (**type == 'N')
-       {
-         int r;
-         int t;
-         *type += 1;
-         if (!get_count (type, &r) || !get_count (type, &t) || t >= ntypes)
-           return 0;
-         while (--r >= 0)
-           {
-             const char *tem = typevec[t];
-             if (need_comma)
-               string_append (decl, ", ");
-             if (!do_arg (&tem, &arg))
-               return 0;
-             string_appends (decl, &arg);
-             string_delete (&arg);
-             need_comma = 1;
-           }
-       }
-      else
-       {
-         if (need_comma)
-           string_append (decl, ", ");
-         if (!do_arg (type, &arg))
-           return 0;
-         if (dont_want_first)
-           dont_want_first = 0;
-         else
-           {
-             string_appends (decl, &arg);
-             need_comma = 1;
-           }
-         string_delete (&arg);
-       }
-    }
-
-  if (**type == 'v')
-    *type += 1;
-  else if (**type == 'e')
-    {
-      *type += 1;
-      if (need_comma)
-       string_append (decl, ",");
-      string_append (decl, "...");
-    }
-
-  string_append (decl, ")");
-  return 1;
-}
-
-static void
-munge_function_name (name)
-     string *name;
-{
-  if (!string_empty (name) && name->p - name->b >= 3 
-      && name->b[0] == 'o' && name->b[1] == 'p' && name->b[2] == '$')
-    {
-           unsigned int i;
-      /* see if it's an assignment expression */
-      if (name->p - name->b >= 10 /* op$assign_ */
-         && memcmp (name->b + 3, "assign_", 7) == 0)
-       {
-         for (i = 0; i < sizeof (optable)/sizeof (optable[0]); i++)
-           {
-             int len = name->p - name->b - 10;
-             if (strlen (optable[i].in) == len
-                 && memcmp (optable[i].in, name->b + 10, len) == 0)
-               {
-                 string_clear (name);
-                 string_append (name, "operator");
-                 string_append (name, optable[i].out);
-                 string_append (name, "=");
-                 return;
-               }
-           }
-       }
-      else
-       {
-         for (i = 0; i < sizeof (optable)/sizeof (optable[0]); i++)
-           {
-             int len = name->p - name->b - 3;
-             if (strlen (optable[i].in) == len 
-                 && memcmp (optable[i].in, name->b + 3, len) == 0)
-               {
-                 string_clear (name);
-                 string_append (name, "operator");
-                 string_append (name, optable[i].out);
-                 return;
-               }
-           }
-       }
-      return;
-    }
-  else if (!string_empty (name) && name->p - name->b >= 5
-          && memcmp (name->b, "type$", 5) == 0)
-    {
-      /* type conversion operator */
-      string type;
-      const char *tem = name->b + 5;
-      if (do_type (&tem, &type))
-       {
-         string_clear (name);
-         string_append (name, "operator ");
-         string_appends (name, &type);
-         string_delete (&type);
-         return;
-       }
-    }
-}
-
-/* a mini string-handling package */
-
-static void
-string_need (s, n)
-     string *s;
-     int n;
-{
-  if (s->b == NULL)
-    {
-      if (n < 32)
-       n = 32;
-      s->p = s->b = (char *) xmalloc (n);
-      s->e = s->b + n;
-    }
-  else if (s->e - s->p < n)
-    {
-      int tem = s->p - s->b;
-      n += tem;
-      n *= 2;
-      s->b = (char *) xrealloc (s->b, n);
-      s->p = s->b + tem;
-      s->e = s->b + n;
-    }
-}
-
-static void
-string_delete (s)
-     string *s;
-{
-  if (s->b != NULL)
-    {
-      free (s->b);
-      s->b = s->e = s->p = NULL;
-    }
-}
-
-static void
-string_init (s)
-     string *s;
-{
-  s->b = s->p = s->e = NULL;
-}
-
-static void 
-string_clear (s)
-     string *s;
-{
-  s->p = s->b;
-}
-
-static int
-string_empty (s)
-     string *s;
-{
-  return s->b == s->p;
-}
-
-static void
-string_append (p, s)
-     string *p;
-     const char *s;
-{
-  int n;
-  if (s == NULL || *s == '\0')
-    return;
-  n = strlen (s);
-  string_need (p, n);
-  memcpy (p->p, s, n);
-  p->p += n;
-}
-
-static void
-string_appends (p, s)
-     string *p, *s;
-{
-  int n;
-  if (s->b == s->p)
-    return;
-  n = s->p - s->b;
-  string_need (p, n);
-  memcpy (p->p, s->b, n);
-  p->p += n;
-}
-
-static void
-string_appendn (p, s, n)
-     string *p;
-     const char *s;
-     int n;
-{
-  if (n == 0)
-    return;
-  string_need (p, n);
-  memcpy (p->p, s, n);
-  p->p += n;
-}
-
-static void
-string_prepend (p, s)
-     string *p;
-     const char *s;
-{
-  if (s == NULL || *s == '\0')
-    return;
-  string_prependn (p, s, strlen (s));
-}
-
-static void
-string_prependn (p, s, n)
-     string *p;
-     const char *s;
-     int n;
-{
-  char *q;
-
-  if (n == 0)
-    return;
-  string_need (p, n);
-  for (q = p->p - 1; q >= p->b; q--)
-    q[n] = q[0];
-  memcpy (p->b, s, n);
-  p->p += n;
-}
diff --git a/binutils/makefile.dos b/binutils/makefile.dos
deleted file mode 100755 (executable)
index dfda6e6..0000000
Binary files a/binutils/makefile.dos and /dev/null differ
diff --git a/binutils/ostrip.c b/binutils/ostrip.c
deleted file mode 100755 (executable)
index a66c76a..0000000
+++ /dev/null
@@ -1,417 +0,0 @@
-/* strip certain symbols from a rel file.
-   Copyright (C) 1986, 1990 Free Software Foundation, Inc.
-
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 1, or (at your option)
-   any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software
-   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-#include "bfd.h"
-#include "sysdep.h"
-#include "getopt.h"
-
-#include <stdio.h>
-#include <signal.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-
-enum strip_action {
-  strip_undef,
-  strip_all,                   /* strip all symbols */
-  strip_debug,                 /* strip all debugger symbols */
-};
-
-/* Which symbols to remove. */
-enum strip_action strip_symbols;
-
-enum locals_action {
-  locals_undef,
-  locals_start_L,              /* discard locals starting with L */
-  locals_all,                  /* discard all locals */
-};
-
-/* Which local symbols to remove. */
-enum locals_action discard_locals;
-
-/* The name this program was run with. */
-char *program_name;
-
-struct option long_options[] = {
-  {"strip-all", 0, 0, 's'},
-  {"strip-debug", 0, 0, 'S'},
-  {"discard-all", 0, 0, 'x'},
-  {"discard-locals", 0, 0, 'X'},
-  {0, 0, 0, 0},
-};
-
-static char *target = NULL;
-
-static int fatal_error;
-
-extern char *malloc();
-extern char *mktemp();
-extern char *realloc();
-extern char *strcpy();
-extern int exit();
-extern int fprintf();
-extern int free();
-extern int getpid();
-extern int kill();
-extern int perror();
-extern int sprintf();
-extern int unlink();
-
-#ifdef __STDC__
-static int strip_bfd(bfd *ibfd, bfd *obfd);
-static int strip_file(char *filetostrip);
-static void usage(void);
-#else
-static int strip_bfd();
-static int strip_file();
-static void usage();
-#endif /* __STDC__ */
-static void copy_sections ();
-static void setup_sections ();
-
-int main(argc, argv)
-char **argv;
-int argc;
-{
-       int ind;
-       int c;
-       program_name = argv[0];
-       
-       strip_symbols = strip_undef;    /* default is to strip everything.  */
-       discard_locals = locals_undef;
-       
-       while ((c = getopt_long (argc, argv, "gsST:xX", long_options, &ind)) != EOF) {
-               switch (c) {
-               case 0:
-                       break;
-               case 's':
-                       strip_symbols = strip_all;
-                       break;
-               case 'g':
-               case 'S':
-                       strip_symbols = strip_debug;
-                       break;
-               case 'T':
-                       target = optarg;
-                       break;
-               case 'x':
-                       discard_locals = locals_all;
-                       break;
-               case 'X':
-                       discard_locals = locals_start_L;
-                       break;
-               default:
-                       usage ();
-               } /* switch on option */
-       } /* for each option */
-       
-       if (strip_symbols == strip_undef && discard_locals == locals_undef) {
-               strip_symbols = strip_all;
-       } /* Default is to strip all symbols.  */
-       
-       
-       if (argc == optind) {
-               return(strip_file("a.out"));
-       } else {
-               int retval = 0;
-
-               for ( ; optind < argc; ++optind) {
-                       retval &= strip_file(argv[optind]);
-               } /* for each file to strip */
-
-               return(retval);
-       } /* if no arguments given */
-
-} /* main() */
-
-static int delayed_signal;
-
-void delay_signal(signo)
-int signo;
-{
-       delayed_signal = signo;
-       signal(signo, delay_signal);
-} /* delay_signal() */
-
-static int sigint_handled = 0;
-static int sighup_handled = 0;
-static int sigterm_handled = 0;
-
-void handle_sigs() {
-       /* Effectively defer handling of asynchronous kill signals.  */
-       delayed_signal = 0;
-       
-       if (signal (SIGINT, SIG_IGN) != SIG_IGN) {
-               sigint_handled = 1;
-               signal(SIGINT, delay_signal);
-       } /* if not ignored */
-       
-       if (signal (SIGHUP, SIG_IGN) != SIG_IGN) {
-               sighup_handled = 1;
-               signal(SIGHUP, delay_signal);
-       } /* if not ignored */
-       
-       if (signal (SIGTERM, SIG_IGN) != SIG_IGN) {
-               sigterm_handled = 1;
-               signal(SIGTERM, delay_signal);
-       } /* if not ignored */
-       
-       return;
-} /* handle_sigs() */
-
-void unhandle_sigs() {
-       /* Effectively undefer handling.  */
-       if (sigint_handled)
-           signal (SIGINT, SIG_DFL);
-       if (sighup_handled)
-           signal (SIGHUP, SIG_DFL);
-       if (sigterm_handled)
-           signal (SIGTERM, SIG_DFL);
-       
-       /* Handle any signal that came in while they were deferred.  */
-       if (delayed_signal)
-           kill (getpid (), delayed_signal);
-       
-       return;
-} /* unhandle_sigs() */
-
-static int strip_file(filetostrip)
-char *filetostrip;
-{
-       bfd *ibfd;
-       bfd *obfd;
-       char tmpfilename[] = "stXXXXXX";
-
-       if ((ibfd = bfd_openr(filetostrip, (char *)NULL)) == NULL) {
-               bfd_perror(filetostrip);
-               return(1);
-       } /* on error opening input */
-       
-       obfd = bfd_openw(mktemp(tmpfilename),
-                        target? target: bfd_get_target (ibfd));
-       if (obfd == NULL) {
-               bfd_perror(tmpfilename);
-
-               if (bfd_close(ibfd) == false) {
-                       bfd_perror(bfd_get_filename(ibfd));
-               } /* on close error */
-
-               return(1);
-       } /* on error opening output */
-
-       handle_sigs();
-
-       if (bfd_check_format(ibfd, bfd_object) != false) {
-               if (bfd_set_format(obfd, bfd_get_format(ibfd)) != false) {
-                       if (!strip_bfd(ibfd, obfd)) {
-                               /* success */
-
-                               if (bfd_close(ibfd) == false) {
-                                       bfd_perror(bfd_get_filename(ibfd));
-                               } /* on close error */
-
-                               if (bfd_close(obfd) == false) {
-                                       bfd_perror(bfd_get_filename(obfd));
-                               } /* on close error */
-
-                               rename(tmpfilename, filetostrip);
-                               unhandle_sigs();
-                               return(0);
-                       } /* strip_bfd prints it's own failing messages */
-               } else {
-                       bfd_perror(filetostrip);
-               } /* can't set format */
-       } else {
-               /* not an object file */
-               (void) fprintf(stderr, "File %s has format 0x%x that will not be stripped.\n",
-                              filetostrip, (unsigned) bfd_get_format(ibfd));
-       } /* if anything fails along the way */
-       
-
-       if (bfd_close(ibfd) == false) {
-               bfd_perror(bfd_get_filename(ibfd));
-       } /* on close error */
-
-       if (bfd_close(obfd) == false) {
-               bfd_perror(bfd_get_filename(obfd));
-       } /* on close error */
-       
-       if (unlink(tmpfilename)) {
-               perror(tmpfilename);
-       } /* on error */
-       
-       unhandle_sigs();
-
-       return(1);
-} /* strip_file() */
-
-
-boolean
-bfd_set_start_address (abfd, new_address)
-     bfd *abfd;
-     bfd_vma new_address;
-{
-  bfd_get_start_address (abfd) = new_address;
-  return true;
-}
-
-
-
-static int
-strip_bfd(ibfd, obfd)
-       bfd *ibfd;
-       bfd *obfd;
-{
-       if (bfd_set_start_address(obfd, bfd_get_start_address(ibfd)) == false
-           || bfd_set_file_flags(obfd, bfd_get_file_flags(ibfd) & ~(HAS_LINENO | HAS_DEBUG | HAS_SYMS | HAS_LOCALS)) == false
-           || bfd_set_start_address(obfd, bfd_get_start_address(ibfd)) == false) {
-               bfd_perror(bfd_get_filename(ibfd));
-               return(1);
-       } /* on error setting file attributes */
-
-      /* bfd mandates that all output sections be created and sizes set before
-        any output is done.  Thus, we traverse all sections twice.  */
-
-       fatal_error = 0;
-       bfd_map_over_sections (ibfd, setup_sections, (void *)obfd);
-       if (!fatal_error)
-               bfd_map_over_sections (ibfd, copy_sections,  (void *)obfd);
-       return fatal_error;
-}
-
-static void
-setup_sections(ibfd, isection, obfd)
-bfd *ibfd;
-sec_ptr isection;
-bfd *obfd;
-{
-       sec_ptr osection;
-       char *err;
-
-       do {
-           err = "making";
-           osection = bfd_make_section(obfd, bfd_section_name(ibfd, isection));
-           if (osection == NULL)
-               break;
-           err = "size";
-           if (!bfd_set_section_size(obfd, osection, 
-                bfd_section_size(ibfd, isection)))
-               break;
-           err = "vma";
-           if (!bfd_set_section_vma(obfd, osection,
-                bfd_section_vma(ibfd, isection)))
-               break;
-           err = "alignment";
-           if (!bfd_set_section_alignment(obfd, osection,
-                bfd_section_alignment(ibfd, isection)))
-               break;
-           err = "flags";
-           if (!bfd_set_section_flags(obfd, osection,
-                bfd_get_section_flags(ibfd, isection)))
-               break;
-           return;
-       } while (0);
-
-       (void) fprintf(stderr, "file \"%s\", section \"%s\": error in %s: ",
-                      bfd_get_filename(ibfd),
-                      bfd_section_name(ibfd, isection),
-                      err);
-
-       bfd_perror("");
-       fatal_error = 1;
-}
-
-static void
-copy_sections(ibfd, isection, obfd)
-bfd *ibfd;
-sec_ptr isection;
-bfd *obfd;
-{
-       static char *memhunk = NULL;
-       static unsigned memhunksize = 0;
-
-       sec_ptr osection;
-       unsigned long size;
-       flagword iflg;
-       char *temp;
-
-       osection = bfd_get_section_by_name (obfd,
-                                           bfd_section_name(ibfd, isection));
-
-       size = bfd_section_size(ibfd, isection);
-       iflg = bfd_get_section_flags(ibfd, isection);
-
-       /* either:
-          we don't need any memory because there's nothing in this section,
-          we had no memory so we got some,
-          we had some memory but not enough so we got more,
-          or we fail to allocat. */
-
-       if (size == 0)
-               return;
-
-       if (memhunk == NULL) {
-               memhunk = malloc (size);
-               memhunksize = size;
-       }
-
-       if (size > memhunksize) {
-               temp = realloc (memhunk, size);
-               memhunksize = size;
-               if (!temp)      /* If realloc failed, blow away our mem */
-                       free (memhunk);
-               memhunk = temp;
-       }
-
-       if (memhunk == NULL) {
-               /* failed to allocate or reallocate */
-               /* FIXME, we should just copy in pieces. */
-               (void) fprintf(stderr,
-          "Could not allocate %lu bytes in which to copy section.\n", size);
-               return;
-       }
-
-       /* now we have enough memory */
-       
-       if (!bfd_get_section_contents(ibfd, isection, memhunk, 0, size)) {
-               bfd_perror(bfd_get_filename(ibfd));
-               fatal_error = 1;
-               return;
-       }
-       if (!bfd_set_section_contents(obfd, osection, memhunk, 0, size)) {
-               bfd_perror(bfd_get_filename(obfd));
-               fatal_error = 1;
-               return;
-       }
-}
-
-void
-usage ()
-{
-  fprintf (stderr, "\
-Usage: %s [-gsxSX] [+strip-all] [+strip-debug] [+discard-all]\n\
-       [+discard-locals] file...\n", program_name);
-  exit (1);
-}
-
-/*
- * Local Variables:
- * comment-column: 0
- * fill-column: 131
- * End:
- */
-
-/* end of strip.c */
diff --git a/binutils/strip.c b/binutils/strip.c
deleted file mode 100755 (executable)
index 156b3eb..0000000
+++ /dev/null
@@ -1,362 +0,0 @@
-/* strip.c -- strip certain symbols from a rel file.
-   Copyright (C) 1986, 1990, 1991 Free Software Foundation, Inc.
-
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
-   any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software
-   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-/* BUGS: When there's not enough memory, this should do the copy
-   in pieces rather than just fail as it does now */
-
-#include "bfd.h"
-#include "sysdep.h"
-#include "getopt.h"
-#include <signal.h>
-
-/* Various program options */
-
-int show_version = 0;
-
-/* Which symbols to remove. */
-enum strip_action {
-  strip_undef,
-  strip_all,                   /* strip all symbols */
-  strip_debug,                 /* strip all debugger symbols */
-} strip_symbols;
-
-/* Which local symbols to remove. */
-enum {
-  locals_undef,
-  locals_start_L,              /* discard locals starting with L */
-  locals_all,                  /* discard all locals */
-} discard_locals;
-
-extern char *mktemp();
-
-/* IMPORTS */
-extern char *program_version;
-extern char *program_name;
-extern char *target;
-extern char *xmalloc();
-
-PROTO(static boolean, strip_file, (char *filetostrip));
-PROTO(static void, copy_sections, (bfd *ibfd, sec_ptr isection, bfd *obfd));
-PROTO(static void, setup_sections, (bfd *ibfd, sec_ptr isection, bfd *obfd));
-\f
-/** main, etc */
-
-static void
-usage ()
-{
-  fprintf (stderr, "strip %s\nUsage: %s [-gsxSX] files ...\n",
-          program_version, program_name);
-  exit (1);
-}
-
-struct option long_options[] = {{"strip-all", 0, 0, 's'},
-                               {"strip-debug", 0, 0, 'S'},
-                               {"discard-all", 0, 0, 'x'},
-                               {"discard-locals", 0, 0, 'X'},
-                               {0, 0, 0, 0}
-                               };
-
-int
-main (argc, argv)
-     char **argv;
-     int argc;
-{
-  int ind;
-  int c;
-  program_name = argv[0];
-       
-  bfd_init();
-
-  strip_symbols = strip_undef; /* default is to strip everything.  */
-  discard_locals = locals_undef;
-       
-  while ((c = getopt_long (argc, argv, "gsST:xX", long_options, &ind)) != EOF) {
-    switch (c) {
-    case 0:
-      break;
-    case 's':
-      strip_symbols = strip_all;
-      break;
-    case 'g':
-    case 'S':
-      strip_symbols = strip_debug;
-      break;
-    case 'T':
-      target = optarg;
-      break;
-    case 'x':
-      discard_locals = locals_all;
-      break;
-    case 'X':
-      discard_locals = locals_start_L;
-      break;
-    default:
-      usage ();
-    }
-  }
-
-  /* Default is to strip all symbols: */
-  if (strip_symbols == strip_undef && discard_locals == locals_undef) {
-    strip_symbols = strip_all;
-  }
-
-  /* OK, all options now parsed.  If no filename specified, do a.out. */
-  if (optind == argc) return !strip_file ("a.out");
-  
-  /* We were given several filenames to do: */
-  while (optind < argc)
-    if (!strip_file (argv[optind++])) return 1;
-
-  return 0;
-}
-\f
-/** Hack signals */
-
-/* Why does strip need to do this, and anyway, if it does shouldn't this be
-   handled by bfd? */
-
-static int delayed_signal;
-
-static int sigint_handled = 0;
-static int sighup_handled = 0;
-static int sigterm_handled = 0;
-
-void
-delay_signal (signo)
-     int signo;
-{
-  delayed_signal = signo;
-  signal (signo, delay_signal);
-}
-
-/* Effectively defer handling of asynchronous kill signals.  */
-void
-handle_sigs ()                 /* puff puff */
-{
-  delayed_signal = 0;
-       
-  if (signal (SIGINT, SIG_IGN) != SIG_IGN) {
-    sigint_handled = 1;
-    signal (SIGINT, delay_signal);
-  }
-       
-  if (signal (SIGHUP, SIG_IGN) != SIG_IGN) {
-    sighup_handled = 1;
-    signal (SIGHUP, delay_signal);
-  }
-       
-  if (signal (SIGTERM, SIG_IGN) != SIG_IGN) {
-    sigterm_handled = 1;
-    signal (SIGTERM, delay_signal);
-  }
-       
-  return;
-}
-
-/* Effectively undefer handling.  */
-void
-unhandle_sigs ()               /* put them down */
-{
-  if (sigint_handled) signal (SIGINT, SIG_DFL);
-
-  if (sighup_handled) signal (SIGHUP, SIG_DFL);
-
-  if (sigterm_handled) signal (SIGTERM, SIG_DFL);
-       
-  /* Handle any signal that came in while they were deferred.  */
-  if (delayed_signal)
-    kill (getpid (), delayed_signal);
-       
-  return;
-}
-\f
-
-static boolean
-strip_file (filetostrip)
-     char *filetostrip;
-{
-  static char template[] = "stXXXXXX";
-  char *slash;
-  char *tmpname;
-  bfd *ibfd;
-  bfd *obfd;
-
-  ibfd = bfd_openr (filetostrip, target);
-
-  if (ibfd == NULL) bfd_fatal (filetostrip);
-
-  handle_sigs ();              /* light up */
-
-  if (!bfd_check_format (ibfd, bfd_object)) {
-    fprintf (stderr, "Can't strip %s file %s.\n",
-            bfd_format_string (bfd_get_format (ibfd)), filetostrip);
-    exit (1);
-  }
-
-  slash = strrchr( filetostrip, '/' );
-  if ( slash ){
-    *slash = 0;
-    tmpname = xmalloc( strlen(filetostrip) + sizeof(template) + 1 );
-    strcpy( tmpname, filetostrip );
-    strcat( tmpname, "/" );
-    strcat( tmpname, template );
-    mktemp( tmpname );
-    *slash = '/';
-  } else {
-    tmpname = xmalloc( sizeof(template) );
-    strcpy( tmpname, template );
-    mktemp( tmpname );
-  }
-
-  obfd = bfd_openw (mktemp(tmpname), (target ? target : bfd_get_target (ibfd)));
-  if (obfd == NULL) bfd_fatal (tmpname);
-
-  if (!bfd_set_format (obfd, bfd_get_format (ibfd)))
-    bfd_fatal (tmpname);
-
-
-  if ((bfd_set_start_address (obfd, bfd_get_start_address (ibfd)) == false) ||
-      (bfd_set_file_flags (obfd, (bfd_get_file_flags (ibfd) &
-                                 ~(HAS_LINENO | HAS_DEBUG | HAS_SYMS |
-                                   HAS_LOCALS))) == false) ||
-      bfd_set_start_address (obfd, bfd_get_start_address (ibfd)) == false)
-    bfd_fatal (bfd_get_filename (ibfd));
-
-   /* Copy architecture of input file to output file */
-   if (!bfd_set_arch_mach (obfd, bfd_get_architecture (ibfd),
-                              bfd_get_machine (ibfd))) {
-     fprintf(stderr, "Output file cannot represent architecture %s",
-       bfd_printable_arch_mach (bfd_get_architecture(ibfd),
-                                bfd_get_machine (ibfd)));
-   }
-
-  /* bfd mandates that all output sections be created and sizes set before
-     any output is done.  Thus, we traverse all sections twice.  */
-  bfd_map_over_sections (ibfd, setup_sections, (void *)obfd);
-  bfd_map_over_sections (ibfd, copy_sections, (void *)obfd);
-
-  if (!bfd_close (obfd)) bfd_fatal (filetostrip);
-  if (!bfd_close (ibfd)) bfd_fatal (filetostrip);
-
-  rename(tmpname, filetostrip);
-  free(tmpname);
-
-  unhandle_sigs();
-
-  return true;
-}
-\f
-/** Actually do the work */
-static void
-setup_sections (ibfd, isection, obfd)
-     bfd *ibfd;
-     sec_ptr isection;
-     bfd *obfd;
-{
-  sec_ptr osection;
-  char *err;
-
-  osection = bfd_make_section (obfd, bfd_section_name (ibfd, isection));
-  if (osection == NULL) {
-      err = "making";
-      goto loser;
-    }
-
-  if (!bfd_set_section_size(obfd, osection, bfd_section_size(ibfd, isection))) {
-     err = "size";
-     goto loser;
-  }
-
-  if (!bfd_set_section_vma (obfd, osection, bfd_section_vma (ibfd, isection))) {
-     err = "vma";
-     goto loser;
-  }
-
-  if (bfd_set_section_alignment (obfd, osection,
-                            bfd_section_alignment (ibfd, isection))
-      != true) {
-         err = "alignment";
-         goto loser;
-  } /* on error, I presume. */
-
-  if (!bfd_set_section_flags (obfd, osection,
-                             bfd_get_section_flags (ibfd, isection))) {
-     err = "flags";
-     goto loser;
-  }
-
-  /* All went well */
-  return;
-  
- loser:
-  fprintf (stderr, "%s: file \"%s\", section \"%s\": error in %s: %s\n",
-          program_name,
-          bfd_get_filename (ibfd), bfd_section_name (ibfd, isection),
-          err, bfd_errmsg (bfd_error));
-  exit (1);
-}
-
-static void
-copy_sections (ibfd, isection, obfd)
-     bfd *ibfd;
-     sec_ptr isection;
-     bfd *obfd;
-{
-  static unsigned char *memhunk = NULL;
-  static unsigned memhunksize = 0;
-
-  sec_ptr osection;
-  unsigned long size;
-  flagword iflg;
-  unsigned char *temp;
-
-  osection = bfd_get_section_by_name (obfd, bfd_section_name (ibfd, isection));
-
-  size = bfd_section_size (ibfd, isection);
-  iflg = bfd_get_section_flags (ibfd, isection);
-
-  /* either:
-     we don't need any memory because there's nothing in this section,
-     we had no memory so we got some,
-     we had some memory but not enough so we got more,
-     or we fail to allocat. */
-
-  if (size == 0)
-     return;
-
-  if ((iflg & SEC_HAS_CONTENTS) == 0)
-      return;
-
-  if (memhunk == NULL) {
-     memhunk = (unsigned char *) xmalloc (size);
-     memhunksize = size;
-  }
-
-  if (size > memhunksize) {
-     temp = (unsigned char *) xrealloc ((char *) memhunk, size);
-     memhunksize = size;
-     memhunk = temp;
-  }
-
-  /* now we have enough memory, just do it: */
-  if (!bfd_get_section_contents (ibfd, isection, memhunk, 0, size))
-     bfd_fatal (bfd_get_filename (ibfd));
-
-  if (!bfd_set_section_contents (obfd, osection, memhunk, 0, size))
-     bfd_fatal (bfd_get_filename (obfd));
-}
diff --git a/config/mh-solaris2 b/config/mh-solaris2
deleted file mode 100755 (executable)
index 4bf0246..0000000
+++ /dev/null
@@ -1,5 +0,0 @@
-# Makefile changes for Suns running Solaris 2
-
-SYSV = -DSYSV
-RANLIB = echo >/dev/null
-INSTALL = cp
diff --git a/config/mh-svr4 b/config/mh-svr4
deleted file mode 100755 (executable)
index 0208c2d..0000000
+++ /dev/null
@@ -1,6 +0,0 @@
-# Define SYSV as -DSYSV if you are using a System V operating system.
-SYSV = -DSYSV -DSVR4
-RANLIB = echo >/dev/null
-
-# The l flag generates a warning from the SVR4 archiver, remove it.
-AR_FLAGS = cq
diff --git a/config/mt-OSE68000 b/config/mt-OSE68000
deleted file mode 100755 (executable)
index aa125af..0000000
+++ /dev/null
@@ -1,2 +0,0 @@
-ALL= all.cross
-INSTALL_TARGET= install.cross
diff --git a/config/mt-OSE68k b/config/mt-OSE68k
deleted file mode 100755 (executable)
index aa125af..0000000
+++ /dev/null
@@ -1,2 +0,0 @@
-ALL= all.cross
-INSTALL_TARGET= install.cross
diff --git a/gas/GNUmakefile-host b/gas/GNUmakefile-host
deleted file mode 100755 (executable)
index 386c869..0000000
+++ /dev/null
@@ -1,6 +0,0 @@
-ALL := $(shell ls -d =*)
-
-%:
-       $(foreach subdir,$(ALL),$(MAKE) -C $(subdir) $@ &&) true
-
-gas:
diff --git a/gas/Makefile-intel b/gas/Makefile-intel
deleted file mode 100755 (executable)
index 54487c2..0000000
+++ /dev/null
@@ -1,146 +0,0 @@
-#-----------------------------------------------------------------------------
-#              Makefile for gas960
-#
-# $Id$
-#-----------------------------------------------------------------------------
-
-# The following two lines should be uncommented for system V (i386v).
-#__i386v__#USG = -DUSG
-#__i386v__#LIBS = -lmalloc -lPW
-
-# The following two lines should be uncommented for HP-UX
-#__hp9000__#USG = -DUSG
-
-# The following line should be uncommented for Macintosh A/UX.
-#__mac-aux__#USG = -DUSG
-
-#Always build with static libraries on Sun systems
-#__sun3__#LDFLAGS = -Bstatic
-#__sun386i__#LDFLAGS = -Bstatic
-#__sun4__#LDFLAGS = -Bstatic
-
-# Essential under System V, harmless elsewhere
-SHELL = /bin/sh
-
-TARG   = gas960
-OPT    = -g
-IPATH  = ../../include
-CFLAGS = ${OPT} ${USG} -DI80960 -I${IPATH}
-
-
-OBJS = app.o append.o as.o atof-generic.o bignum-copy.o expr.o \
-       flonum-const.o flonum-copy.o flonum-mult.o frags.o gdb-blocks.o \
-       gdb-file.o gdb-lines.o gdb-symbols.o gdb.o hash.o hex-value.o \
-       input-file.o input-scrub.o messages.o obstack.o output-file.o read.o \
-       strstr.o subsegs.o symbols.o version.o write.o xmalloc.o xrealloc.o
-
-# Note that we use the 386 floating-point support for the i80960
-I960OBJ        = i960.o i960-opcode.o atof-i386.o
-
-gas960:        ${OBJS} ${I960OBJ} VERSION
-       make ver960.o
-       ${CC} -o gas960 ${LDFLAGS} ${OBJS} ${I960OBJ} ver960.o ${LIBS}
-
-hash.o:        hash.c
-       ${CC} -c ${CFLAGS} -Derror=as_fatal hash.c
-
-xmalloc.o:     xmalloc.c
-       ${CC} -c ${CFLAGS} -Derror=as_fatal xmalloc.c
-
-xrealloc.o:    xrealloc.c
-       ${CC} -c ${CFLAGS} -Derror=as_fatal xrealloc.c
-
-app.o:         as.h
-
-as.o:          ${IPATH}/b.out.h as.h read.h struc-symbol.h write.h
-atof-generic.o:        flonum.h
-bignum-copy.o: bignum.h
-expr.o:                ${IPATH}/b.out.h as.h expr.h flonum.h obstack.h read.h
-expr.o:                struc-symbol.h symbols.h
-flonum-const.o:        flonum.h
-flonum-copy.o: flonum.h
-flonum-mult.o: flonum.h
-flonum-normal.o:flonum.h
-flonum-print.o:        flonum.h
-frags.o:       ${IPATH}/b.out.h as.h frags.h obstack.h struc-symbol.h subsegs.h
-gdb.o:         as.h
-gdb-blocks.o:  as.h
-gdb-lines.o:   as.h frags.h obstack.h
-gdb-symbols.o: ${IPATH}/b.out.h as.h struc-symbol.h
-hash.o:                hash.h
-i960.o:                as.h ${IPATH}/b.out.h expr.h flonum.h frags.h hash.h
-i960.o:                i960-opcode.h md.h obstack.h struc-symbol.h write.h
-i960-opcode.o: i960-opcode.h
-input-file.o:  input-file.h
-input-scrub.o: as.h input-file.h read.h
-messages.o:    as.h
-obstack.o:     obstack.h
-read.o:                ${IPATH}/b.out.h as.h expr.h flonum.h frags.h hash.h md.h
-read.o:                obstack.h read.h struc-symbol.h symbols.h
-subsegs.o:     ${IPATH}/b.out.h as.h frags.h obstack.h struc-symbol.h subsegs.h
-subsegs.o:     write.h
-symbols.o:     ${IPATH}/b.out.h as.h frags.h hash.h obstack.h struc-symbol.h
-symbols.o:     symbols.h
-write.o:       ${IPATH}/b.out.h as.h md.h obstack.h struc-symbol.h subsegs.h
-write.o:       symbols.h write.h
-
-flonum.h:      bignum.h
-
-#-----------------------------------------------------------------------------
-#              'STANDARD' GNU/960 TARGETS BELOW THIS POINT
-#
-# 'VERSION' file must be present and contain a string of the form "x.y"
-#-----------------------------------------------------------------------------
-
-ver960.c: FORCE
-       rm -f ver960.c
-       echo "char ${TARG}_ver[]= \"${TARG} `cat VERSION`, `date`\";" > ver960.c
-
-
-# This target should be invoked before building a new release.
-# 'VERSION' file must be present and contain a string of the form "x.y"
-#
-roll:
-       @V=`cat VERSION`                ; \
-       MAJ=`sed 's/\..*//' VERSION`    ; \
-       MIN=`sed 's/.*\.//' VERSION`    ; \
-       V=$$MAJ.`expr $$MIN + 1`        ; \
-       rm -f VERSION                   ; \
-       echo $$V >VERSION               ; \
-       echo Version $$V
-
-# Dummy target to force execution of dependent targets.
-#
-FORCE:
-
-# 'G960BASE' will be defined at invocation
-install:
-       make ${TARG} OPT=-O
-       strip ${TARG}
-       rm -f ${G960BASE}/bin/${TARG}
-       mv ${TARG} ${G960BASE}/bin/${TARG}
-
-clean:
-       rm -f ${TARG} *.o core
-
-# Target to uncomment host-specific lines in this makefile.  Such lines must
-# have the following string beginning in column 1: #__<hostname>__#
-# Original Makefile is backed up as 'Makefile.old'.
-#
-# Invoke with:  make make HOST=xxx
-#
-make:
-       -@if test $(HOST)x = x ; then \
-               echo '\aSpecify "make make HOST=???"'; \
-               exit 1; \
-       fi ; \
-       grep -s "^#The next line was generated by 'make make'" Makefile; \
-       if test $$? = 0 ; then  \
-               echo "\aMakefile has already been processed with 'make make'";\
-               exit 1; \
-       fi ; \
-       mv -f Makefile Makefile.old; \
-       echo "#The next line was generated by 'make make'"       >Makefile ; \
-       echo "HOST=$(HOST)"                                     >>Makefile ; \
-       echo                                                    >>Makefile ; \
-       sed "s/^#__$(HOST)__#//" < Makefile.old                 >>Makefile
diff --git a/gas/Makefile.generic b/gas/Makefile.generic
deleted file mode 100755 (executable)
index 1bf57a3..0000000
+++ /dev/null
@@ -1,586 +0,0 @@
-host = generic
-target = generic
-# Makefile for GNU Assembler
-#   Copyright (C) 1987, 1988, 1990, 1991 Free Software Foundation, Inc.
-
-#This file is part of GNU GAS.
-
-#GNU GAS is free software; you can redistribute it and/or modify
-#it under the terms of the GNU General Public License as published by
-#the Free Software Foundation; either version 1, or (at your option)
-#any later version.
-
-#GNU GAS is distributed in the hope that it will be useful,
-#but WITHOUT ANY WARRANTY; without even the implied warranty of
-#MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-#GNU General Public License for more details.
-
-#You should have received a copy of the GNU General Public License
-#along with GNU GAS; see the file COPYING.  If not, write to
-#the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
-
-# $Id$
-
-# The targets for external use include:
-# all, doc, proto, install, uninstall, includes, TAGS,
-# clean, cleanconfig, realclean, stage1, stage2, stage3, stage4.
-
-# Variables that exist for you to override.
-# See below for how to change them for certain systems.
-
-ALLOCA =
-CFLAGS = -g $(XCFLAGS) # -I$(srcdir)/../include
-INTERNAL_CFLAGS = $(CROSS)
-OLDCC = cc
-BISON = bison
-BISONFLAGS = -v
-AR = ar
-OLDAR_FLAGS = qc
-AR_FLAGS = rc
-SHELL = /bin/sh
-# on sysV, define this as cp.
-INSTALL = install -c
-# These permit overriding just for certain files.
-INSTALL_PROGRAM = $(INSTALL)
-INSTALL_FILE = $(INSTALL)
-
-# Define this as & to perform parallel make on a Sequent.
-# Note that this has some bugs, and it seems currently necessary 
-# to compile all the gen* files first by hand to avoid erroneous results.
-P =
-
-# How to invoke ranlib.
-RANLIB = ranlib
-# Test to use to see whether ranlib exists on the system.
-RANLIB_TEST = [ -f /usr/bin/ranlib -o -f /bin/ranlib ]
-
-# CFLAGS for use with OLDCC, for compiling gnulib.
-# NOTE: -O does not work on some Unix systems!
-CCLIBFLAGS = -O
-
-# Version of ar to use when compiling gnulib. 
-OLDAR = ar
-
-version=`./gcc -dumpversion`
-
-# Directory where sources are, from where we are.
-srcdir = .
-# Common prefix for installation directories.
-# NOTE: This directory must exist when you start installation.
-prefix = /usr/local
-# Directory in which to put the executable for the command `gcc'
-bindir = $(prefix)/bin
-# Directory in which to put the directories used by the compiler.
-libdir = $(prefix)/lib
-# Directory in which the compiler finds executables, libraries, etc.
-libsubdir = $(libdir)/gcc/$(target)/$(version)
-# Number to put in man-page filename.
-manext = 1
-# Directory in which to put man pages.
-mandir = $(prefix)/man/man$(manext)
-
-# Additional system libraries to link with.
-CLIB=
-
-# Change this to a null string if obstacks are installed in the
-# system library.
-OBSTACK=obstack.o
-
-# Specify the rule for actually making gnulib.
-GNULIB = gnulib.portable
-
-# Specify the rule for actually making gnulib2.
-GNULIB2 = gnulib2.portable
-
-# List of extra C and assembler files to add to gnulib.
-# Assembler files should have names ending in `.asm'.
-LIBFUNCS_EXTRA = 
-
-# Program to convert libraries.
-LIBCONVERT = 
-
-# Control whether header files are installed.
-INSTALL_HEADERS=install-headers
-
-# Change this to empty to prevent installing limits.h
-LIMITS_H = limits.h
-
-# Directory to link to, when using the target `maketest'.
-DIR = ../gcc
-
-# For better debugging under COFF, define SEPARATE_AUX_OUTPUT in config.h
-# and define the following variable as `aux-output2.c' in make-...
-AUX_OUTPUT2 =
-
-# Flags to use when cross-building GCC.
-# Prefix to apply to names of object files when using them
-# to run on the machine we are compiling on.
-HOST_PREFIX=
-# Prefix to apply to names of object files when compiling them
-# to run on the machine we are compiling on.
-# The default for this variable is chosen to keep these rules 
-# out of the way of the other rules for compiling the same source files.
-HOST_PREFIX_1=loser-
-HOST_CC=$(CC)
-HOST_CFLAGS=$(ALL_CFLAGS)
-HOST_LDFLAGS=$(LDFLAGS)
-HOST_CPPFLAGS=$(CPPFLAGS)
-
-# Choose the real default target.
-ALL=bootstrap
-
-# End of variables for you to override.
-
-# Lists of files for various purposes.
-
-REAL_SOURCES = \
-       $(srcdir)/app.c \
-       $(srcdir)/as.c \
-       $(srcdir)/atof-generic.c \
-       $(srcdir)/bignum-copy.c \
-       $(srcdir)/cond.c \
-       $(srcdir)/expr.c \
-       $(srcdir)/flonum-const.c \
-       $(srcdir)/flonum-copy.c \
-       $(srcdir)/flonum-mult.c \
-       $(srcdir)/frags.c \
-       $(srcdir)/hash.c \
-       $(srcdir)/hex-value.c \
-       $(srcdir)/input-file.c \
-       $(srcdir)/input-scrub.c \
-       $(srcdir)/messages.c \
-       $(srcdir)/output-file.c \
-       $(srcdir)/read.c \
-       $(srcdir)/strstr.c \
-       $(srcdir)/subsegs.c \
-       $(srcdir)/symbols.c \
-       $(srcdir)/version.c \
-       $(srcdir)/write.c \
-       $(srcdir)/xmalloc.c \
-       $(srcdir)/xrealloc.c
-
-# in an expedient order
-LINKED_SOURCES = \
-       targ-cpu.c \
-       obj-format.c \
-       atof-targ.c
-
-SOURCES = $(LINKED_SOURCES) $(REAL_SOURCES)
-
-REAL_HEADERS = \
-       $(srcdir)/as.h \
-       $(srcdir)/bignum.h \
-       $(srcdir)/expr.h \
-       $(srcdir)/flonum.h \
-       $(srcdir)/frags.h \
-       $(srcdir)/hash.h \
-       $(srcdir)/input-file.h \
-       $(srcdir)/tc.h \
-       $(srcdir)/obj.h \
-       $(srcdir)/read.h \
-       $(srcdir)/reloc.h \
-       $(srcdir)/struc-symbol.h \
-       $(srcdir)/subsegs.h \
-       $(srcdir)/symbols.h \
-       $(srcdir)/syscalls.h \
-       $(srcdir)/write.h
-
-LINKED_HEADERS = \
-       a.out.gnu.h \
-       a.out.h \
-       host.h \
-       targ-env.h \
-       targ-cpu.h \
-       obj-format.h \
-       atof-targ.h
-
-HEADERS = $(LINKED_HEADERS) $(REAL_HEADERS)
-
-OBJS = \
-       targ-cpu.o \
-       obj-format.o \
-       atof-targ.o \
-       app.o \
-       as.o \
-       atof-generic.o \
-       bignum-copy.o \
-       cond.o \
-       expr.o \
-       flonum-const.o \
-       flonum-copy.o \
-       flonum-mult.o \
-       frags.o \
-       hash.o \
-       hex-value.o \
-       input-file.o \
-       input-scrub.o \
-       messages.o \
-       output-file.o \
-       read.o \
-       strstr.o \
-       subsegs.o \
-       symbols.o \
-       version.o \
-       write.o \
-       xmalloc.o \
-       xrealloc.o
-
-# Definition of `all' is here so that new rules inserted by sed
-# do not specify the default target.
-# The real definition is under `all.internal'.
-
-all: $(ALL)
-
-# sed inserts variable overrides after the following line.
-####
-
-# Now figure out from those variables how to compile and link.
-
-# This is the variable actually used when we compile.
-ALL_CFLAGS = $(INTERNAL_CFLAGS) $(CFLAGS)
-
-# Even if ALLOCA is set, don't use it if compiling with GCC.
-USE_ALLOCA= `if [ x"${CC}" = x"${OLDCC}" ] ; then echo ${ALLOCA}; else true; fi`
-USE_HOST_ALLOCA= `if [ x"${CC}" = x"${OLDCC}" ] ; then echo ${HOST_PREFIX}${ALLOCA}; else true; fi`
-
-# Dependency on obstack, alloca, malloc or whatever library facilities
-# are not installed in the system libraries.
-# We don't use USE_ALLOCA because backquote expansion doesn't work in deps.
-LIBDEPS= $(OBSTACK) $(ALLOCA) $(MALLOC)
-
-# Likewise, for use in the tools that must run on this machine
-# even if we are cross-building GCC.
-# We don't use USE_ALLOCA because backquote expansion doesn't work in deps.
-HOST_LIBDEPS= $(HOST_PREFIX)$(OBSTACK) $(HOST_PREFIX)$(ALLOCA) $(HOST_PREFIX)$(MALLOC)
-
-# How to link with both our special library facilities
-# and the system's installed libraries.
-LIBS = $(OBSTACK) $(USE_ALLOCA) $(MALLOC) $(CLIB)
-
-# Likewise, for use in the tools that must run on this machine
-# even if we are cross-building GCC.
-HOST_LIBS = $(HOST_PREFIX)$(OBSTACK) $(USE_HOST_ALLOCA) $(HOST_PREFIX)$(MALLOC) $(CLIB)
-
-# Specify the directories to be searched for header files.
-# Both . and srcdir are used, in that order,
-# so that tm.h and config.h will be found in the compilation
-# subdirectory rather than in the source directory.
-INCLUDES = -I. -I$(srcdir) -I$(srcdir)/config
-SUBDIR_INCLUDES = -I.. -I../$(srcdir) -I../$(srcdir)/config
-
-# Always use -I$(srcdir)/config when compiling.
-.c.o:
-       $(CC) -c $(ALL_CFLAGS) $(CPPFLAGS) $(INCLUDES) $<
-
-# This tells GNU make version 3 not to export all the variables
-# defined in this file into the environment.
-.NOEXPORT:
-
-# Files to be copied away after each stage in building.
-STAGE_GCC=gcc
-STAGESTUFF = *.o gas 
-
-# The files that "belong" in CONFIG_H are deliberately omitted
-# because having them there would not be useful in actual practice.
-# All they would do is cause complete recompilation every time
-# one of the machine description files is edited.
-# That may or may not be what one wants to do.
-# If it is, rm *.o is an easy way to do it.
-# CONFIG_H = config.h tm.h
-CONFIG_H =
-
-gas: $(OBJS) $(LIBDEPS)
-       $(CC) $(ALL_CFLAGS) $(LDFLAGS) -o gas $(OBJS) $(LIBS)
-
-all.internal: native
-# This is what is made with the host's compiler if making a cross assembler.
-native: config.status gas
-
-config.status:
-       @echo You must configure gas.  Look at the INSTALL file for details.
-       @false
-
-compilations: ${OBJS}
-
-# Compiling object files from source files.
-
-# Note that dependencies on obstack.h are not written
-# because that file is not part of GAS.
-
-app.o : app.c as.h host.h targ-env.h obj-format.h \
-  targ-cpu.h struc-symbol.h reloc.h \
-  write.h flonum.h bignum.h expr.h frags.h hash.h read.h symbols.h tc.h obj.h 
-as.o : as.c as.h host.h targ-env.h obj-format.h \
-  targ-cpu.h struc-symbol.h reloc.h \
-  write.h flonum.h bignum.h expr.h frags.h hash.h read.h symbols.h tc.h obj.h 
-atof-generic.o : atof-generic.c as.h host.h targ-env.h obj-format.h \
-  targ-cpu.h struc-symbol.h reloc.h \
-  write.h flonum.h bignum.h expr.h frags.h hash.h read.h symbols.h tc.h obj.h 
-bignum-copy.o : bignum-copy.c as.h host.h \
-  targ-env.h obj-format.h \
-  targ-cpu.h struc-symbol.h reloc.h \
-  write.h flonum.h bignum.h expr.h frags.h hash.h read.h symbols.h tc.h obj.h 
-cond.o : cond.c as.h host.h targ-env.h obj-format.h \
-  targ-cpu.h struc-symbol.h reloc.h \
-  write.h flonum.h bignum.h expr.h frags.h hash.h read.h symbols.h tc.h obj.h \
-  obstack.h 
-debug.o : debug.c as.h host.h targ-env.h obj-format.h \
-  targ-cpu.h struc-symbol.h reloc.h \
-  write.h flonum.h bignum.h expr.h frags.h hash.h read.h symbols.h tc.h obj.h \
-  subsegs.h 
-expr.o : expr.c as.h host.h targ-env.h obj-format.h \
-  targ-cpu.h  struc-symbol.h reloc.h \
-  write.h flonum.h bignum.h expr.h frags.h hash.h read.h symbols.h tc.h obj.h \
-  obstack.h 
-flonum-const.o : flonum-const.c flonum.h bignum.h 
-flonum-copy.o : flonum-copy.c as.h host.h targ-env.h obj-format.h \
-  targ-cpu.h  struc-symbol.h reloc.h \
-  write.h flonum.h bignum.h expr.h frags.h hash.h read.h symbols.h tc.h obj.h 
-flonum-mult.o : flonum-mult.c flonum.h bignum.h 
-frags.o : frags.c as.h host.h targ-env.h obj-format.h \
-  targ-cpu.h  struc-symbol.h reloc.h \
-  write.h flonum.h bignum.h expr.h frags.h hash.h read.h symbols.h tc.h obj.h \
-  subsegs.h obstack.h 
-hash.o : hash.c as.h host.h targ-env.h obj-format.h \
-  targ-cpu.h  struc-symbol.h reloc.h \
-  write.h flonum.h bignum.h expr.h frags.h hash.h read.h symbols.h tc.h obj.h 
-hex-value.o : hex-value.c 
-input-file.o : input-file.c as.h host.h \
-   targ-env.h obj-format.h targ-cpu.h \
-   struc-symbol.h reloc.h write.h flonum.h bignum.h expr.h \
-  frags.h hash.h read.h symbols.h tc.h obj.h input-file.h 
-input-scrub.o : input-scrub.c /usr/include/errno.h /usr/include/sys/errno.h \
-  as.h host.h targ-env.h obj-format.h \
-  targ-cpu.h  struc-symbol.h reloc.h \
-  write.h flonum.h bignum.h expr.h frags.h hash.h read.h symbols.h tc.h obj.h \
-  input-file.h 
-messages.o : messages.c as.h host.h targ-env.h obj-format.h \
-  targ-cpu.h  struc-symbol.h reloc.h \
-  write.h flonum.h bignum.h expr.h frags.h hash.h read.h symbols.h tc.h obj.h
-obstack.o : obstack.c obstack.h 
-output-file.o : output-file.c as.h host.h targ-env.h obj-format.h \
-  targ-cpu.h  struc-symbol.h reloc.h \
-  write.h flonum.h bignum.h expr.h frags.h hash.h read.h symbols.h tc.h obj.h \
-  output-file.h 
-read.o : read.c as.h host.h targ-env.h obj-format.h \
-  targ-cpu.h  struc-symbol.h reloc.h \
-  write.h flonum.h bignum.h expr.h frags.h hash.h read.h symbols.h tc.h obj.h \
-  obstack.h 
-strstr.o : strstr.c   
-subsegs.o : subsegs.c as.h host.h targ-env.h obj-format.h \
-  targ-cpu.h  struc-symbol.h reloc.h \
-  write.h flonum.h bignum.h expr.h frags.h hash.h read.h symbols.h tc.h obj.h \
-  subsegs.h obstack.h 
-symbols.o : symbols.c as.h host.h targ-env.h obj-format.h \
-  targ-cpu.h  struc-symbol.h reloc.h \
-  write.h flonum.h bignum.h expr.h frags.h hash.h read.h symbols.h tc.h obj.h \
-  obstack.h subsegs.h 
-version.o : version.c 
-write.o : write.c as.h host.h targ-env.h obj-format.h \
-  targ-cpu.h  struc-symbol.h reloc.h \
-  write.h flonum.h bignum.h expr.h frags.h hash.h read.h symbols.h tc.h obj.h \
-  subsegs.h obstack.h output-file.h 
-xmalloc.o : xmalloc.c
-xrealloc.o : xrealloc.c 
-atof-targ.o : atof-targ.c as.h host.h targ-env.h obj-format.h \
-  targ-cpu.h struc-symbol.h reloc.h \
-  write.h flonum.h bignum.h expr.h frags.h hash.h read.h \
-  symbols.h tc.h obj.h 
-obj-format.o : obj-format.c as.h host.h targ-env.h obj-format.h \
-  targ-cpu.h struc-symbol.h reloc.h \
-  write.h flonum.h bignum.h expr.h frags.h hash.h read.h \
-  symbols.h tc.h obj.h obstack.h 
-targ-cpu.o : targ-cpu.c targ-env.h obj-format.h \
-  targ-cpu.h struc-symbol.h reloc.h \
-  write.h flonum.h bignum.h expr.h frags.h hash.h read.h \
-  symbols.h tc.h obj.h obstack.h
-
-# Normally this target is not used; but it is used if you
-# define ALLOCA=alloca.o.  In that case, you must get a suitable alloca.c
-# from the GNU Emacs distribution.
-# Note some machines won't allow $(CC) without -S on this source file.
-alloca.o:      alloca.c
-       $(CC) $(ALL_CFLAGS) $(CPPFLAGS) -S `echo $(srcdir)/alloca.c | sed 's,^\./,,'`
-       as alloca.s -o alloca.o
-
-# Compile the libraries to be used by gen*.
-# If we are not cross-building, gen* use the same .o's that cc1 will use,
-# and HOST_PREFIX_1 is `foobar', just to ensure these rules don't conflict
-# with the rules for rtl.o, alloca.o, etc.
-$(HOST_PREFIX_1)alloca.o: alloca.c
-       rm -f $(HOST_PREFIX)alloca.c
-       cp $(srcdir)/alloca.c $(HOST_PREFIX)alloca.c
-       $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(HOST_PREFIX)alloca.c
-
-$(HOST_PREFIX_1)obstack.o: obstack.c
-       rm -f $(HOST_PREFIX)obstack.c
-       cp $(srcdir)/obstack.c $(HOST_PREFIX)obstack.c
-       $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(HOST_PREFIX)obstack.c
-
-$(HOST_PREFIX_1)malloc.o: malloc.c
-       rm -f $(HOST_PREFIX)malloc.c
-       cp $(srcdir)/malloc.c $(HOST_PREFIX)malloc.c
-       $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(HOST_PREFIX)malloc.c
-
-# Remake the info files.
-
-doc: $(srcdir)/gas.info
-
-$(srcdir)/gas.info: $(srcdir)/gas.texinfo
-       makeinfo `echo $(srcdir)/gas.texinfo | sed 's,^\./,,'`
-
-
-# Deletion of files made during compilation.
-# There are three levels of this: `clean', `cleanconfig' and `realclean'.
-# `clean' deletes what you want to delete ordinarily to save space.
-# This is most, but not all, of the files made by compilation.
-# `cleanconfig' also deletes everything depending
-# on the choice of config files.
-# `realclean' also deletes everything that could be regenerated automatically.
-
-clean:
-       -rm -f $(STAGESTUFF)
-# Delete the temporary source copies for cross compilation.
-       -rm -f $(HOST_PREFIX_1)alloca.c $(HOST_PREFIX_1)malloc.c
-       -rm -f $(HOST_PREFIX_1)obstack.c 
-# Delete the stamp files except stamp-gnulib2.
-       -rm -f core
-
-# Like clean but also delete the links made to configure gas.
-cleanconfig: clean
-       -rm -f config.status Makefile host.h targ-env.h
-       -rm -f targ-cpu.h targ-cpu.c
-       -rm -f obj-format.h obj-format.c
-       -rm -f atof-targ.c
-
-# Get rid of every file that's generated from some other file (except INSTALL).
-realclean: cleanconfig
-       -rm -f gas.aux gas.cps gas.fns gas.info gas.kys gas.pgs gas.tps gas.vrs
-       -rm -f TAGS 
-       -rm -f gas.info* gas.?? gas.??s gas.log gas.toc gas.*aux
-       -rm -f *.dvi
-
-# Entry points `install', `includes' and `uninstall'.
-
-# Copy the files into directories where they will be run.
-install:
-       $(INSTALL_PROGRAM) gas $(bindir)/as
-
-# Create the installation directory.
-install-dir:
-       -mkdir $(libdir)
-       -mkdir $(libdir)/gcc
-       -mkdir $(libdir)/gcc/$(target)
-       -mkdir $(libdir)/gcc/$(target)/$(version)
-
-# Install the compiler executables built during cross compilation.
-install-cross: native install-dir
-       -if [ -f cc1 ] ; then $(INSTALL_PROGRAM) cc1 $(libsubdir)/cc1; else true; fi
-       -if [ -f cc1plus ] ; then $(INSTALL_PROGRAM) cc1plus $(libsubdir)/cc1plus; else true; fi
-       $(INSTALL_PROGRAM) cpp $(libsubdir)/cpp
-       ./gcc -dumpspecs > $(libsubdir)/specs
-       $(INSTALL_PROGRAM) gcc $(bindir)/gcc
-
-# Install the man pages.
-install-man: install-dir $(srcdir)/gcc.1 protoize.1 unprotoize.1
-       $(INSTALL_FILE) $(srcdir)/gcc.1 $(mandir)/gcc.$(manext)
-       chmod a-x $(mandir)/gcc.$(manext)
-       $(INSTALL_FILE) $(srcdir)/protoize.1 $(mandir)/protoize.$(manext)
-       chmod a-x $(mandir)/protoize.$(manext)
-       $(INSTALL_FILE) $(srcdir)/unprotoize.1 $(mandir)/unprotoize.$(manext)
-       chmod a-x $(mandir)/unprotoize.$(manext)
-
-# Cancel installation by deleting the installed files.
-uninstall:
-       -rm -rf $(libsubdir)
-       -rm -rf $(bindir)/gas
-       -rm -rf $(mandir)/gas.$(manext)
-
-
-# These exist for maintenance purposes.
-
-tags TAGS: force
-       etags $(REAL_SOURCES) $(REAL_HEADERS) README Makefile config/*.[hc]
-       
-bootstrap: gas force
-       $(MAKE) stage1
-       $(MAKE) CC="$(CC)" CFLAGS="-O -Bstage1/ $(CFLAGS)" libdir=$(libdir) ALLOCA= gas
-       $(MAKE) stage2
-       $(MAKE) CC="$(CC)" CFLAGS="-O -Bstage2/ $(CFLAGS)" libdir=$(libdir) ALLOCA= gas
-       for i in *.o; do cmp $$i stage2/$$i; done
-
-bootstrap2: force
-       $(MAKE) CC="$(CC)" CFLAGS="-O -Bstage1/ $(CFLAGS)" libdir=$(libdir) ALLOCA= gas
-       $(MAKE) stage2
-       $(MAKE) CC="$(CC)" CFLAGS="-O -Bstage2/ $(CFLAGS)" libdir=$(libdir) ALLOCA= gas
-       for i in *.o; do cmp $$i stage2/$$i; done
-
-bootstrap3: force
-       $(MAKE) CC="$(CC)" CFLAGS="-O -Bstage2/ $(CFLAGS)" libdir=$(libdir) ALLOCA= gas
-       for i in *.o; do cmp $$i stage2/$$i; done
-
-# Copy the object files from a particular stage into a subdirectory.
-stage1: force
-       -mkdir stage1
-       -mv $(STAGESTUFF) stage1
-       -(cd stage1 ; ln -s gas as)
-
-stage2: force
-       -mkdir stage2
-       -mv $(STAGESTUFF) stage2
-       -(cd stage2 ; ln -s gas as)
-
-
-stage3: force
-       -mkdir stage3
-       -mv $(STAGESTUFF) $(STAGE_GCC) stage3
-       -rm -f stage3/gnulib
-       -cp gnulib stage3
-       -if $(RANLIB_TEST) ; then $(RANLIB) stage3/gnulib; else true; fi
-
-stage4: force
-       -mkdir stage4
-       -mv $(STAGESTUFF) $(STAGE_GCC) stage4
-       -rm -f stage4/gnulib
-       -cp gnulib stage4
-       -if $(RANLIB_TEST) ; then $(RANLIB) stage4/gnulib; else true; fi
-
-# Copy just the executable files from a particular stage into a subdirectory,
-# and delete the object files.  Use this if you're just verifying a version
-# that is pretty sure to work, and you are short of disk space.
-risky-stage1: force
-       -mkdir stage1
-       -mv cc1 cpp cccp gcc stage1
-       -rm -f stage1/gnulib
-       -cp gnulib stage1 && $(RANLIB) stage1/gnulib
-       -make clean
-
-risky-stage2: force
-       -mkdir stage2
-       -mv cc1 cpp cccp gcc stage2
-       -rm -f stage2/gnulib
-       -cp gnulib stage2 && $(RANLIB) stage2/gnulib
-       -make clean
-
-risky-stage3: force
-       -mkdir stage3
-       -mv cc1 cpp cccp gcc stage3
-       -rm -f stage3/gnulib
-       -cp gnulib stage3 && $(RANLIB) stage3/gnulib
-       -make clean
-
-risky-stage4: force
-       -mkdir stage4
-       -mv cc1 cpp cccp gcc stage4
-       -rm -f stage4/gnulib
-       -cp gnulib stage4 && $(RANLIB) stage4/gnulib
-       -make clean
-
-#In GNU Make, ignore whether `stage*' exists.
-.PHONY: stage1 stage2 stage3 stage4 clean realclean TAGS bootstrap
-.PHONY: risky-stage1 risky-stage2 risky-stage3 risky-stage4
-
-force:
-
-Makefile: $(srcdir)/Makefile.in $(srcdir)/configure
-       $(srcdir)/configure.was -srcdir=$(srcdir) -host=$(host) $(target)
diff --git a/gas/Makefile.loic b/gas/Makefile.loic
deleted file mode 100755 (executable)
index 4de7da1..0000000
+++ /dev/null
@@ -1,203 +0,0 @@
-# Makefile for GAS.
-# Copyright (C) 1989, Free Software Foundation
-# 
-# This file is part of GAS, the GNU Assembler.
-# 
-# GAS is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 1, or (at your option)
-# any later version.
-# 
-# GAS is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-# 
-# You should have received a copy of the GNU General Public License
-# along with GAS; see the file COPYING.  If not, write to
-# the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
-
-BINDIR = /usr/local/bin
-
-BINARY = gas
-
-#
-# Add these flags to XCFLAGS below for specific use.
-#
-# If you machine does not have vfprintf, but does have _doprnt(),
-# -DNO_VARARGS
-#
-# If the return-type of a signal-hander is void (instead of int),
-# -DSIGTY
-#
-# To include the mc68851 mmu coprocessor instructions in the 68020 assembler,
-# -Dm68851 
-#
-# If you want the 80386 assembler to correctly handle fsub/fsubr and fdiv/fdivr
-# opcodes (unlike most 80386 assemblers)
-# -DNON_BROKEN_WORDS
-#
-XCFLAGS =
-
-# Your favorite compiler
-CC = gcc
-
-# Uncomment the following lines if you use USG
-
-INCLUDE_DIRS = -I.
-COFF_OBJECTS = stack.o
-CPPFLAGS = -DUSG
-CFLAGS = -g $(CPPFLAGS) $(XCFLAGS)
-LDFLAGS = 
-#LOADLIBES = -lPW
-
-# Uncomment the following lines if you use BSD
-#INCLUDE_DIRS = -I.
-#CPPFLAGS = 
-#CFLAGS = -g $(CPPFLAGS) $(XCFLAGS)
-#LDFLAGS = 
-#LOADLIBES =
-
-CONFIG_FILES = \
-       machine.c machine.h atof.c obj-format.c obj-format.h opcode.h
-
-OBJECTS = \
-       as.o xrealloc.o xmalloc.o hash.o hex-value.o \
-       atof-generic.o append.o messages.o expr.o app.o \
-       frags.o input-file.o input-scrub.o output-file.o \
-       subsegs.o symbols.o version.o flonum-const.o flonum-copy.o \
-       flonum-mult.o strstr.o bignum-copy.o obstack.o write.o read.o \
-       obj-format.o machine.o atof.o $(COFF_OBJECTS)
-
-SOURCES = $(OBJECTS:.o=.c)
-
-all : $(BINARY)
-
-install : all
-       cp $(BINARY) $(BINDIR)
-
-clean : 
-       rm -f $(OBJECTS)
-
-clobber : clean
-       rm -f $(BINARY) $(CONFIG_FILES) dependencies TAGS m68k.h
-
-$(BINARY) : $(OBJECTS)
-       $(CC) -o $(BINARY) $(LDFLAGS) $(OBJECTS) $(LOADLIBES)
-
-TAGS : $(SOURCES)
-       etags $(SOURCES) *.h
-
-CXREF : $(SOURCES)
-       cxref -c $(INCLUDE_DIRS) $(SOURCES)
-
-stack.o: stack.c
-       $(CC) $(CFLAGS) -c stack.c
-
-atof.o: \
-       flonum.h \
-       bignum.h
-obj-format.o: \
-       as.h \
-       md.h \
-       aout.h \
-       a.out.gnu.h \
-       struc-symbol.h \
-       write.h \
-       append.h
-read.o: \
-       obj-format.h \
-       a.out.gnu.h \
-       as.h \
-       read.h \
-       md.h \
-       hash.h \
-       obstack.h \
-       frags.h \
-       flonum.h \
-       bignum.h \
-       struc-symbol.h \
-       expr.h \
-       symbols.h \
-       sparc.h
-write.o: \
-       obj-format.h \
-       a.out.gnu.h \
-       as.h \
-       md.h \
-       subsegs.h \
-       obstack.h \
-       struc-symbol.h \
-       write.h \
-       symbols.h \
-       append.h \
-       sparc.h
-obstack.o: \
-       obstack.h
-bignum-copy.o: \
-       bignum.h
-flonum-mult.o: \
-       flonum.h \
-       bignum.h
-flonum-copy.o: \
-       flonum.h \
-       bignum.h
-flonum-const.o: \
-       flonum.h \
-       bignum.h
-symbols.o: \
-       obj-format.h \
-       a.out.gnu.h \
-       as.h \
-       hash.h \
-       obstack.h \
-       struc-symbol.h \
-       symbols.h \
-       frags.h
-subsegs.o: \
-       obj-format.h \
-       a.out.gnu.h \
-       as.h \
-       subsegs.h \
-       obstack.h \
-       frags.h \
-       struc-symbol.h \
-       write.h
-input-scrub.o: \
-       as.h \
-       read.h \
-       input-file.h
-input-file.o: \
-       input-file.h
-frags.o: \
-       obj-format.h \
-       a.out.gnu.h \
-       as.h \
-       subsegs.h \
-       obstack.h \
-       frags.h \
-       struc-symbol.h
-expr.o: \
-       obj-format.h \
-       a.out.gnu.h \
-       as.h \
-       flonum.h \
-       bignum.h \
-       read.h \
-       struc-symbol.h \
-       expr.h \
-       obstack.h \
-       symbols.h
-messages.o: \
-       as.h
-atof-generic.o: \
-       flonum.h \
-       bignum.h
-hash.o: \
-       hash.h
-as.o: \
-       obj-format.h \
-       a.out.gnu.h \
-       as.h \
-       struc-symbol.h \
-       write.h
diff --git a/gas/VERSION b/gas/VERSION
deleted file mode 100755 (executable)
index 5625e59..0000000
+++ /dev/null
@@ -1 +0,0 @@
-1.2
diff --git a/gas/a.out.gnu.h b/gas/a.out.gnu.h
deleted file mode 100755 (executable)
index fe777f9..0000000
+++ /dev/null
@@ -1,351 +0,0 @@
-/* This file is a.out.gnu.h
-
-   Copyright (C) 1987-1992 Free Software Foundation, Inc.
-   
-   This file is part of GAS, the GNU Assembler.
-   
-   GAS is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
-   any later version.
-   
-   GAS is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-   
-   You should have received a copy of the GNU General Public License
-   along with GAS; see the file COPYING.  If not, write to
-   the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-#ifndef __A_OUT_GNU_H__
-#define __A_OUT_GNU_H__
-
-#include "aout/reloc.h"
-
-#define __GNU_EXEC_MACROS__
-
-#ifndef __STRUCT_EXEC_OVERRIDE__
-
-/* This is the layout on disk of a Unix V7, Berkeley, SunOS, Vax Ultrix
-   "struct exec".  Don't assume that on this machine, the "struct exec"
-   will lay out the same sizes or alignments.  */
-
-struct exec_bytes {
-       unsigned char a_info[4];
-       unsigned char a_text[4];
-       unsigned char a_data[4];
-       unsigned char a_bss[4];
-       unsigned char a_syms[4];
-       unsigned char a_entry[4];
-       unsigned char a_trsize[4];
-       unsigned char a_drsize[4];
-};
-
-/* How big the "struct exec" is on disk */
-#define        EXEC_BYTES_SIZE (8 * 4)
-
-/* This is the layout in memory of a "struct exec" while we process it.  */
-
-struct exec
-{
-       unsigned long a_info;           /* Use macros N_MAGIC, etc for access */
-       unsigned a_text;                /* length of text, in bytes */
-       unsigned a_data;                /* length of data, in bytes */
-       unsigned a_bss;         /* length of uninitialized data area for file, in bytes */
-       unsigned a_syms;                /* length of symbol table data in file, in bytes */
-       unsigned a_entry;               /* start address */
-       unsigned a_trsize;              /* length of relocation info for text, in bytes */
-       unsigned a_drsize;              /* length of relocation info for data, in bytes */
-};
-
-#endif /* __STRUCT_EXEC_OVERRIDE__ */
-
-/* these go in the N_MACHTYPE field */
-/* These symbols could be defined by code from Suns...punt 'em */
-#undef M_UNKNOWN
-#undef M_68010
-#undef M_68020
-#undef M_SPARC
-enum machine_type {
-       M_UNKNOWN = 0,
-       M_68010 = 1,
-       M_68020 = 2,
-       M_SPARC = 3,
-       /* skip a bunch so we don't run into any of sun's numbers */
-       M_386 = 100,
-       M_29K = 101,
-       M_RS6000 = 102, /* IBM RS/6000 */
-       /* HP/BSD formats */
-       M_HP200 = 200,  /* hp200 (68010) BSD binary */
-       M_HP300 = 300,  /* hp300 (68020+68881) BSD binary */
-       M_HPUX23 = 0x020C,      /* hp200/300 HPUX binary */
-};
-
-#define N_MAGIC(exec) ((exec).a_info & 0xffff)
-#define N_MACHTYPE(exec) ((enum machine_type)(((exec).a_info >> 16) & 0xff))
-#define N_FLAGS(exec) (((exec).a_info >> 24) & 0xff)
-#define N_SET_INFO(exec, magic, type, flags) \
-    ((exec).a_info = ((magic) & 0xffff) \
-     | (((int)(type) & 0xff) << 16) \
-     | (((flags) & 0xff) << 24))
-#define N_SET_MAGIC(exec, magic) \
-    ((exec).a_info = (((exec).a_info & 0xffff0000) | ((magic) & 0xffff)))
-
-#define N_SET_MACHTYPE(exec, machtype) \
-    ((exec).a_info = \
-     ((exec).a_info&0xff00ffff) | ((((int)(machtype))&0xff) << 16))
-
-#define N_SET_FLAGS(exec, flags) \
-    ((exec).a_info = \
-     ((exec).a_info&0x00ffffff) | (((flags) & 0xff) << 24))
-
-/* Code indicating object file or impure executable.  */
-#define OMAGIC 0407
-/* Code indicating pure executable.  */
-#define NMAGIC 0410
-/* Code indicating demand-paged executable.  */
-#define ZMAGIC 0413
-
-/* Virtual Address of text segment from the a.out file.  For OMAGIC,
-   (almost always "unlinked .o's" these days), should be zero.
-   For linked files, should reflect reality if we know it.  */
-
-#ifndef N_TXTADDR
-#define N_TXTADDR(x)   (N_MAGIC(x)==OMAGIC? 0 : TEXT_START_ADDR)
-#endif
-
-#ifndef N_BADMAG
-#define N_BADMAG(x)      (N_MAGIC(x) != OMAGIC         \
-                          && N_MAGIC(x) != NMAGIC              \
-                          && N_MAGIC(x) != ZMAGIC)
-#endif
-
-/* By default, segment size is constant.  But on some machines, it can
-   be a function of the a.out header (e.g. machine type).  */
-#ifndef        N_SEGSIZE
-#define        N_SEGSIZE(x)    SEGMENT_SIZE
-#endif
-    
-    /* This complexity is for encapsulated COFF support */
-#ifndef _N_HDROFF
-#define _N_HDROFF(x)   (N_SEGSIZE(x) - sizeof (struct exec))
-#endif
-
-#ifndef N_TXTOFF
-#define N_TXTOFF(x)    (N_MAGIC(x) == ZMAGIC ? \
-                        _N_HDROFF((x)) + sizeof (struct exec) :        \
-                        sizeof (struct exec))
-#endif
-
-
-#ifndef N_DATOFF
-#define N_DATOFF(x)    ( N_TXTOFF(x) + (x).a_text )
-#endif
-
-#ifndef N_TRELOFF
-#define N_TRELOFF(x)   ( N_DATOFF(x) + (x).a_data )
-#endif
-
-#ifndef N_DRELOFF
-#define N_DRELOFF(x)   ( N_TRELOFF(x) + (x).a_trsize )
-#endif
-
-#ifndef N_SYMOFF
-#define N_SYMOFF(x)    ( N_DRELOFF(x) + (x).a_drsize )
-#endif
-
-#ifndef N_STROFF
-#define N_STROFF(x)    ( N_SYMOFF(x) + (x).a_syms )
-#endif
-
-/* Address of text segment in memory after it is loaded.  */
-#ifndef N_TXTADDR
-#define        N_TXTADDR(x)    0
-#endif
-    
-#ifndef N_DATADDR
-#define N_DATADDR(x) \
-    (N_MAGIC(x)==OMAGIC? (N_TXTADDR(x)+(x).a_text) \
-     :  (N_SEGSIZE(x) + ((N_TXTADDR(x)+(x).a_text-1) & ~(N_SEGSIZE(x)-1))))
-#endif
-
-/* Address of bss segment in memory after it is loaded.  */
-#define N_BSSADDR(x) (N_DATADDR(x) + (x).a_data)
-\f
-struct nlist {
-       union {
-               char *n_name;
-               struct nlist *n_next;
-               long n_strx;
-       } n_un;
-       unsigned char n_type;
-       char n_other;
-       short n_desc;
-       unsigned long n_value;
-};
-
-#define N_UNDF 0
-#define N_ABS 2
-#define N_TEXT 4
-#define N_DATA 6
-#define N_BSS 8
-#define        N_COMM  0x12            /* common (visible in shared lib commons) */
-#define N_FN 0x1F              /* File name of a .o file */
-
-/* Note: N_EXT can only usefully be OR-ed with N_UNDF, N_ABS, N_TEXT,
-   N_DATA, or N_BSS.  When the low-order bit of other types is set,
-   (e.g. N_WARNING versus N_FN), they are two different types.  */
-#define N_EXT 1
-#define N_TYPE 036
-#define N_STAB 0340
-
-/* The following type indicates the definition of a symbol as being
-   an indirect reference to another symbol.  The other symbol
-   appears as an undefined reference, immediately following this symbol.
-   
-   Indirection is asymmetrical.  The other symbol's value will be used
-   to satisfy requests for the indirect symbol, but not vice versa.
-   If the other symbol does not have a definition, libraries will
-   be searched to find a definition.  */
-
-#define N_INDR 0xa
-
-/* The following symbols refer to set elements.
-   All the N_SET[ATDB] symbols with the same name form one set.
-   Space is allocated for the set in the text section, and each set
-   element's value is stored into one word of the space.
-   The first word of the space is the length of the set (number of elements).
-   
-   The address of the set is made into an N_SETV symbol
-   whose name is the same as the name of the set.
-   This symbol acts like a N_DATA global symbol
-   in that it can satisfy undefined external references.  */
-
-/* These appear as input to LD, in a .o file.  */
-#define        N_SETA  0x14            /* Absolute set element symbol */
-#define        N_SETT  0x16            /* Text set element symbol */
-#define        N_SETD  0x18            /* Data set element symbol */
-#define        N_SETB  0x1A            /* Bss set element symbol */
-
-/* This is output from LD.  */
-#define N_SETV 0x1C            /* Pointer to set vector in data area.  */
-
-/* Warning symbol. The text gives a warning message, the next symbol
-   in the table will be undefined. When the symbol is referenced, the
-   message is printed.  */
-
-#define        N_WARNING 0x1e
-\f
-/* This structure describes a single relocation to be performed.
-   The text-relocation section of the file is a vector of these structures,
-   all of which apply to the text section.
-   Likewise, the data-relocation section applies to the data section.  */
-
-/* The following enum and struct were borrowed from SunOS's
-   /usr/include/sun4/a.out.h  and extended to handle
-   other machines.  It is currently used on SPARC and AMD 29000.
-   
-   reloc_ext_bytes is how it looks on disk.  reloc_info_extended is
-   how we might process it on a native host.  */
-
-struct reloc_ext_bytes {
-       unsigned char   r_address[4];
-       unsigned char r_index[3];
-       unsigned char r_bits[1];
-       unsigned char r_addend[4];
-};
-
-#define        RELOC_EXT_BITS_EXTERN_BIG       0x80
-#define        RELOC_EXT_BITS_EXTERN_LITTLE    0x01
-
-#define        RELOC_EXT_BITS_TYPE_BIG         0x1F
-#define        RELOC_EXT_BITS_TYPE_SH_BIG      0
-#define        RELOC_EXT_BITS_TYPE_LITTLE      0xF8
-#define        RELOC_EXT_BITS_TYPE_SH_LITTLE   3
-
-#define        RELOC_EXT_SIZE  12              /* Bytes per relocation entry */
-
-struct reloc_info_extended
-{
-       unsigned long r_address;
-       unsigned int  r_index:24;
-# define       r_symbolnum  r_index
-       unsigned        r_extern:1;
-       unsigned        :2;
-       /*  RS/6000 compiler does not support enum bitfield 
-           enum reloc_type r_type:5; */
-       enum reloc_type r_type;
-       long int        r_addend;
-};
-
-/* The standard, old-fashioned, Berkeley compatible relocation struct */
-
-struct reloc_std_bytes {
-       unsigned char   r_address[4];
-       unsigned char r_index[3];
-       unsigned char r_bits[1];
-};
-
-#define        RELOC_STD_BITS_PCREL_BIG        0x80
-#define        RELOC_STD_BITS_PCREL_LITTLE     0x01
-
-#define        RELOC_STD_BITS_LENGTH_BIG       0x60
-#define        RELOC_STD_BITS_LENGTH_SH_BIG    5       /* To shift to units place */
-#define        RELOC_STD_BITS_LENGTH_LITTLE    0x06
-#define        RELOC_STD_BITS_LENGTH_SH_LITTLE 1
-
-#define        RELOC_STD_BITS_EXTERN_BIG       0x10
-#define        RELOC_STD_BITS_EXTERN_LITTLE    0x08
-
-#define        RELOC_STD_BITS_BASEREL_BIG      0x08
-#define        RELOC_STD_BITS_BASEREL_LITTLE   0x08
-
-#define        RELOC_STD_BITS_JMPTABLE_BIG     0x04
-#define        RELOC_STD_BITS_JMPTABLE_LITTLE  0x04
-
-#define        RELOC_STD_BITS_RELATIVE_BIG     0x02
-#define        RELOC_STD_BITS_RELATIVE_LITTLE  0x02
-
-#define        RELOC_STD_SIZE  8               /* Bytes per relocation entry */
-
-#ifndef CUSTOM_RELOC_FORMAT
-struct relocation_info
-{
-       /* Address (within segment) to be relocated.  */
-       int r_address;
-       /* The meaning of r_symbolnum depends on r_extern.  */
-       unsigned int r_symbolnum:24;
-       /* Nonzero means value is a pc-relative offset
-          and it should be relocated for changes in its own address
-          as well as for changes in the symbol or section specified.  */
-       unsigned int r_pcrel:1;
-       /* Length (as exponent of 2) of the field to be relocated.
-          Thus, a value of 2 indicates 1<<2 bytes.  */
-       unsigned int r_length:2;
-       /* 1 => relocate with value of symbol.
-          r_symbolnum is the index of the symbol
-          in file's the symbol table.
-          0 => relocate with the address of a segment.
-          r_symbolnum is N_TEXT, N_DATA, N_BSS or N_ABS
-          (the N_EXT bit may be set also, but signifies nothing).  */
-       unsigned int r_extern:1;
-       /* The next three bits are for SunOS shared libraries, and seem to
-          be undocumented.  */
-       unsigned int r_baserel:1;       /* Linkage table relative */
-       unsigned int r_jmptable:1;      /* pc-relative to jump table */
-       
-#ifdef TC_NS32K
-#define r_bsr  r_baserel
-#define r_disp r_jmptable
-#endif /* TC_NS32K */
-       
-       unsigned int r_relative:1;      /* "relative relocation" */
-       /* unused */
-       unsigned int r_pad:1;           /* Padding -- set to zero */
-};
-#endif /* CUSTOM_RELOC_FORMAT */
-
-#endif /* __A_OUT_GNU_H__ */
-
-/* end of a.out.gnu.h */
diff --git a/gas/config.sub b/gas/config.sub
deleted file mode 100755 (executable)
index dac9ab8..0000000
+++ /dev/null
@@ -1,446 +0,0 @@
-#!/bin/sh
-
-# Configuration subroutine to validate and canonicalize a configuration type.
-# Supply the specified configuration type as an argument.
-# If it is invalid, we print an error message on stderr and exit with code 1.
-# Otherwise, we print the canonical config type on stdout and succeed.
-
-# This file is supposed to be the same for all GNU packages
-# and recognize all the CPU types, system types and aliases
-# that are meaningful with *any* GNU software.
-# Each package is responsible for reporting which valid configurations
-# it does not support.  The user should be able to distinguish
-# a failure to support a valid configuration from a meaningless
-# configuration (e.g. a typo).
-
-# Please email any bugs, comments, and/or additions to this file to:
-# configure@cygnus.com
-
-# decode aliases into canonical names
-
-case "$1" in
-# cpu alone is a valid alias for cpu-none-none.
-vax | tahoe | i386 | i860 | m68k | m68000 | m88k | sparc | ns32k \
-       | alliant | arm | c1 | c2 | mips | pyramid | tron | a29k \
-       | romp | rs6000 | i960 | h8300)
-       cpu=$1
-       vendor=none
-       os=none
-       ;;
-altos | altos3068)
-       cpu=m68k
-       vendor=altos
-       os=sysv # maybe?
-       ;;
-altosgas)
-       cpu=m68k
-       vendor=altos
-       os=gas
-       ;;
-am29k)
-       cpu=a29k
-       vendor=none
-       os=bsd
-       ;;
-amdahl)
-       cpu=580
-       vendor=amdahl
-       os=uts
-       ;;
-amigados)
-       cpu=m68k
-       vendor=cbm
-       os=amigados # Native AmigaDOS
-       ;;
-amigaunix | amix)
-       cpu=m68k
-       vendor=cbm
-       os=svr4 # System V Release 4 (svr4 is an industry recognized acronym)
-       ;;
-apollo68)
-       cpu=m68k
-       vendor=apollo
-       os=sysv # maybe?
-       ;;
-balance)
-       cpu=ns32k
-       vendor=sequent
-       os=dynix
-       ;;
-convex-c1)
-       cpu=c1
-       vendor=convex
-       os=sysv # maybe?
-       ;;
-convex-c2)
-       cpu=c2
-       vendor=convex
-       os=sysv # maybe?
-       ;;
-cray | ymp)
-       cpu=ymp
-       vendor=cray
-       os=unicos
-       ;;
-cray2)
-       cpu=cray2
-       vendor=cray
-       os=unicos
-       ;;
-dec3100 | decstatn | decstation | decstation-3100 | pmax | pmin)
-       cpu=mips
-       vendor=dec
-       os=ultrix
-       ;;
-delta | 3300 | motorola-3300 | motorola-delta \
-      | 3300-motorola | delta-motorola)
-       cpu=m68k
-       vendor=motorola
-       os=sysv # maybe?
-       ;;
-
-delta88)
-       cpu=m88k
-       vendor=motorola
-       os=m88kbcs
-       ;;
-
-gmicro)
-       cpu=tron
-       vendor=gmicro
-       os=sysv # maybe?
-       ;;
-
-h8300hds)
-       cpu=h8300
-       vendor=hitachi
-       os=hds
-       ;;
-
-# start-sanitize-v9
-hal-32 | hal32)
-       cpu=sparc64
-       vendor=hal
-       os=hal32
-       ;;
-hal-64 | hal64)
-       cpu=sparc64
-       vendor=hal
-       os=hal64
-       ;;
-sparc64)
-       cpu=sparc64
-       vendor=sun
-       os=v9
-       ;;
-sparc64-v7 | sparc64v7)
-       cpu=sparc64
-       vendor=sun
-       os=v7
-       ;;
-# end-sanitize-v9
-hp300bsd)
-       cpu=m68k
-       vendor=hp
-       os=bsd
-       ;;
-hp300hpux | hpux | hp9k3[2-9][0-9])
-       cpu=m68k
-       vendor=hp
-       os=hpux
-       ;;
-hp9k31[0-9] | hp9k2[0-9][0-9])
-       cpu=m68000
-       vendor=hp
-       os=hpux
-       ;;
-i386sco)
-       cpu=i386
-       vendor=sco
-       os=sysv # maybe?
-       ;;
-i386v)
-       cpu=i386
-       vendor=none
-       os=sysv
-       ;;
-i386v32)
-       cpu=i386
-       vendor=none
-       os=sysv32
-       ;;
-iris | iris4d)
-       cpu=mips
-       vendor=sgi
-       os=irix # maybe?
-       ;;
-
-dpx2)
-       vendor=bull
-       cpu=m68k
-       os=sysv
-       ;;
-isi | isi68)
-       cpu=m68k
-       vendor=isi
-       os=sysv # maybe?
-       ;;
-littlemips)
-       cpu=mips
-       vendor=little
-       os=bsd
-       ;;
-magnum | m3230)
-       cpu=mips
-       vendor=mips
-       os=sysv # maybe?
-       ;;
-merlin)
-       cpu=ns32k
-       vendor=utek
-       os=sysv # maybe?
-       ;;
-miniframe)
-       cpu=m68000
-       vendor=convergent
-       os=sysv # maybe?
-       ;;
-mmax)
-       cpu=ns32k
-       vendor=encore
-       os=sysv # maybe?
-       ;;
-news | news700 | news800 | news900)
-       cpu=m68k
-       vendor=sony
-       os=newsos3 # Based on bsd-4.3
-       ;;
-news1000)
-       cpu=m68030
-       vendor=sony
-       os=newsos3 # ?
-       ;;
-news-3600 | bigmips | risc-news)
-       cpu=mips
-       vendor=sony
-       os=newsos4 # Presumably?
-       ;;
-next)
-       cpu=m68k
-       vendor=next
-       os=sysv # maybe?
-       ;;
-nindy960)
-       cpu=i960
-       vendor=intel
-       os=nindy
-       ;;
-none)
-       cpu=none
-       vendor=none
-       os=none
-       ;;
-np1)
-       cpu=np1
-       vendor=gould
-       os=sysv # maybe?
-       ;;
-rtpc)
-       cpu=romp
-       vendor=ibm
-       os=aix # maybe?
-       ;;      
-pbd)
-       cpu=sparc
-       vendor=unicom
-       os=sysv
-       ;;
-pn)
-       cpu=pn
-       vendor=gould
-       os=sysv # maybe?
-       ;;
-ps2)
-       cpu=i386
-       vendor=ibm
-       os=sysv # maybe?
-       ;;
-sun2)
-       cpu=m68000
-       vendor=sun
-       os=sunos4
-       ;;
-sun2os3)
-       cpu=m68000
-       vendor=sun
-       os=sunos3
-       ;;
-sun2os4)
-       cpu=m68000
-       vendor=sun
-       os=sunos4
-       ;;
-sun3)
-       cpu=m68k
-       vendor=sun
-       os=sunos4
-       ;;
-sun3os3)
-       cpu=m68k
-       vendor=sun
-       os=sunos3
-       ;;
-sun3os4)
-       cpu=m68k
-       vendor=sun
-       os=sunos4
-       ;;
-sun386 | roadrunner | sun386i)
-       cpu=i386
-       vendor=sun
-       os=sunos
-       ;;
-sun4)
-       cpu=sparc
-       vendor=sun
-       os=sunos4
-       ;;
-sun4os3)
-       cpu=sparc
-       vendor=sun
-       os=sunos3
-       ;;
-sun4os4)
-       cpu=sparc
-       vendor=sun
-       os=sunos4
-       ;;
-symmetry)
-       cpu=i386
-       vendor=sequent
-       os=dynix
-       ;;
-tower | tower-32)
-       cpu=m68k
-       vendor=ncr
-       os=sysv # maybe?
-       ;;
-ultra3)
-       cpu=a29k
-       vendor=nyu
-       os=sym1
-       ;;
-umax)
-       cpu=ns32k
-       vendor=encore
-       os=sysv # maybe?
-       ;;
-unixpc | safari | pc7300 | 3b1 | 7300 | 7300-att | att-7300)
-       cpu=m68k
-       vendor=att
-       os=sysv # maybe?
-       ;;
-vax-dec)
-       cpu=vax
-       vendor=dec
-       os=ultrix # maybe?
-       ;;
-vxworks68)
-       cpu=m68k
-       vendor=wrs
-       os=vxworks
-       ;;
-vxworks960)
-       cpu=i960
-       vendor=wrs
-       os=vxworks
-       ;;
-xmp)
-       cpu=xmp
-       vendor=cray
-       os=unicos
-       ;;
-# not an alias.  parse what we expect to be a canonical name.
-*)
-       cpu=`echo $1 | sed 's/-.*$//'`
-
-       if [ "${cpu}" = "$1" ] ; then
-               # no vendor so this is an invalid name.
-               echo '***' No vendor: configuration \`$1\' not recognized 1>&2
-               exit 1
-       else
-               # parse out vendor
-               rest=`echo $1 | sed "s/${cpu}-//"`
-               vendor=`echo ${rest} | sed 's/-.*$//'`
-
-               if [ "${vendor}" = "${rest}" ] ; then
-                       # a missing os is acceptable
-                       os=none
-               else
-                       os=`echo ${rest} | sed "s/${vendor}-//"`
-               fi
-       fi
-       ;;
-esac
-
-# At this point we should have three parts of a canonical name in cpu,
-# vendor, and os.
-
-# verify that the cpu is known.
-
-case "${cpu}" in
-none | vax | tahoe | i386 | i860 | m68k | m68000 | m88k | sparc \
-       | ns32k | alliant | arm | c1 | c2 | mips | pyramid | tron \
-       | a29k | romp | rs6000 | i960 | xmp | ymp | cray2 | 580 | h8300)
-       ;;
-
-# start-sanitize-v9
-sparc64) ;;
-# end-sanitize-v9
-
-*)
-       echo '***' Invalid cpu \`${cpu}\': configuration \`$1\' not recognized 1>&2
-       exit 1
-       ;;
-esac
-
-# verify that the vendor is known.
-
-case "${vendor}" in
-       altos | amdahl | aout | apollo | att | bcs | bout |\
-       cbm | convergent | convex | coff | cray | dec | encore |\
-       gould | hitachi | intel | isi | hp | ibm | little | mips | motorola |\
-       ncr | next | none | nyu | sco | sequent | sgi | sony | sun |\
-       unicom | utek | wrs | bull ) ;; 
-
-# start-sanitize-v9
-hal) ;;
-# end-sanitize-v9
-
-*)
-       echo '***' Invalid vendor \`${vendor}\': configuration \`$1\' not recognized 1>&2
-       exit 1
-       ;;
-esac
-
-# verify that the os is known, if it exists.
-
-case "${os}" in
-aix* | aout | bout | bsd* | coff | ctix* | dynix* | esix* | hpux* \
-       | hds | irix* | isc* | kern | mach* | newsos* | nindy* | none \
-       | osf* | sco* | sunos* | sysv* | ultrix* | unos* | v88r* \
-       | vms* | vxworks* | sym[1-9]* | unicos* | uts | svr4 \
-       | amigados) 
-       ;;
-
-# start-sanitize-v9
-hal32 | hal64 | v7 | v9) ;;
-# end-sanitize-v9
-
-*)
-       echo '***' Invalid os \`${os}\': configuration \`$1\' not recognized 1>&2
-       exit 1
-       ;;
-esac
-
-echo ${cpu}-${vendor}-${os}
diff --git a/gas/config/ChangeLog b/gas/config/ChangeLog
deleted file mode 100644 (file)
index f81fe41..0000000
+++ /dev/null
@@ -1,289 +0,0 @@
-Mon Nov 23 11:50:00 1992  Ken Raeburn  (raeburn@cygnus.com)
-
-       * obj-coff.c (obj_coff_endef): Use as_warn, not fprintf.
-
-       * tc-m68k.c (md_assemble): Don't complain about 68000 with 68881;
-       could be doing emulation.
-
-Tue Nov 10 09:50:25 1992  Ian Lance Taylor  (ian@cygnus.com)
-
-       * tc-m68k.c (m68k_reg_parse): If REGISTER_PREFIX isn't defined,
-       still accept (but don't require) OPTIONAL_REGISTER_PREFIX before
-       the register name.
-       (insert_reg): put REGISTER_PREFIX before register names before
-       putting them in the symbol table.
-       * tc-m68k.h (OPTIONAL_REGISTER_PREFIX): Define to be "%", if not
-       M68KCOFF.
-
-       * obj-coffbfd.c (fill_section): set STYP_NOLOAD bit for .bss
-       section.
-
-       * atof-ieee.c, atof-ns32k.c, tc-*.c: made EXP_CHARS, FLT_CHARS,
-       comment_chars, line_comment_chars and line_seperator_chars
-       consistently const, and always initialized them.  Included read.h.
-
-Thu Nov  5 17:55:41 1992  Jim Wilson  (wilson@sphagnum.cygnus.com)
-
-       * tc-sparc.c (sparc_ip): Add code to flag error if an absolute
-       constant will not fit in an immediate field.
-       (md_apply_fix, RELOC_BASE13 case): Check for relocation overflow.
-
-Wed Nov  4 07:50:46 1992  Ken Raeburn  (raeburn@cygnus.com)
-
-       * obj-coff.c (callj_table): Delete global variable.
-       (obj_emit_relocations): Define it locally here, and only if
-       TC_I960 is defined.
-
-       * tc-m68k.c (m68k_reg_parse): Underscore is part of a symbol name.
-       (m68k_ip): Don't warn about bignum used as float bit-pattern.
-
-       * obj-coff.c: Replaced ANSI and non-ANSI function declarations
-       with a single set using PARAMS macro.
-
-       * tc-i960.c (tc_bout_fix_to_chars): Bit-field fixups want a length
-       of 2.
-
-       * tc-i960.c: Missed a couple of 0->NO_RELOC conversions.
-
-       * tc-i960.h (N_BALNAME, N_CALLNAME): Define as char-type values,
-       so widening works consistently.
-
-Fri Oct 23 14:40:38 1992  Ian Lance Taylor  (ian@cygnus.com)
-
-       * obj-coffbfd.c (write_object_file): check return value of
-       bfd_close_all_done.
-
-Tue Oct 20 13:02:25 1992  Ian Lance Taylor  (ian@cygnus.com)
-
-       * Support for i386-sysv.
-       obj-coffbfd.c (do_relocs_for, write_object_file): set segment
-       addresses to reasonable sizes.  New define ZERO_BASED_SEGMENTS can
-       be used to set them all to zero as was done before.
-       (fill_section): segment addresses now set in write_object_file.
-       (fill_section): Don't set STYP_NOLOAD for .bss section.
-       (fixup_segment): 386 uses strange common symbol format.
-       tc-i386.c (tc_coff_fix2rtype): use R_DIR32, not R_RELLONG, for
-       compatibility with SVR3.2 linker.
-
-Mon Oct  5 09:28:57 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
-
-        fix i960+non-bfd coff bit rot. 
-       * obj-coff.c (c_dot_file_symbol, obj_coff_ln, obj_coff_line):
-       support for C source listings. (obj_coff_endef): look in the right
-       part of the symbol for the symbol name
-
-       * tc-m68k.c (get_num): make it work for all segments, not just the
-       first three.
-
-Tue Sep 29 12:22:52 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
-
-       * obj-coffbfd.c (write_object_file): don't fixup for the z8k
-       * tc-z8k.c: lots of bug fixes
-
-Tue Sep 29 10:51:55 1992  Ian Lance Taylor  (ian@cygnus.com)
-
-       * tc-i960.h, tc-i960.c: avoid the ANSI preprocessor addition
-       #elif, since it is not supported by old compilers.
-       ho-rs6000.h, tc-m68k.c: the native RS/6000 compiler miscompiles a
-       couple of expressions in tc-m68k.c.
-
-Mon Sep 28 21:16:51 1992  Ken Raeburn  (raeburn@cambridge.cygnus.com)
-
-       * tc-i960.c (get_cdisp): Use NO_RELOC, not 0, in call to fix_new.
-
-Fri Sep 25 18:18:52 1992  Ian Lance Taylor  (ian@cygnus.com)
-
-       * tc-m68k.h: if M68KCOFF, define DOT_LABEL_PREFIX (to require
-       local labels to start with a .) and set REGISTER_PREFIX to %.
-       tc-m68k.c (m68k_reg_parse): accept REGISTER_PREFIX if defined.
-
-Tue Sep 22 13:02:07 1992  Sean Eric Fagan  (sef@cygnus.com)
-
-       * obj-coffbfd.c (do_relocs_for,fill_section): now allocate all
-       sections starting from zero, rather than making them consecutive.
-       This makes subsequent reloc calculations easier, esp if the object
-       format doesn't understand addends. (obj_coff_lcomm): (maybe temporarily)
-       allocate lcomm in .data rather than in .bss.  It seems that some
-       tools can't cope with a non-zero sized bss before linkage.
-Tue Sep 22 15:10:51 1992  Ken Raeburn  (raeburn@cambridge.cygnus.com)
-
-       * tc-m68k.c: Replace "enum m68k_architecture" with "int"
-       throughout.  That enum no longer means what we thought it meant.
-
-       * tc-m68k.c (md_assemble, md_parse_option): Handle new
-       "-mno-688[58]1" options.
-
-       * tc-m68k.c: Added CPU32 support.
-
-Fri Sep 18 08:02:18 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
-
-       * tc-m68k.c (m68k_ip): An(disp) is not pc relative.
-
-Sun Sep 13 20:29:39 1992  Ian Lance Taylor  (ian@cygnus.com)
-
-       * obj-coffbfd.h: define WARN_SIGNED_OVERFLOW_WORD.
-       obj-coffbfd.c (fixup_segment): check for signed .word overflow if
-       WARN_SIGNED_OVERFLOW_WORD.
-
-       * obj-coffbfd.c (fixup_segment): fixed missing parens in
-       expression checking for byte or word overflow.
-
-Fri Sep 11 10:21:04 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
-
-       Support for i386 coff
-       * obj-coffbfd.h : added stuff 
-       * tc-i386.c (tc_coff_fix2rtype): new function
-       * tc-i386.h : new coff defines
-
-Wed Sep  9 11:10:24 1992  Ian Lance Taylor  (ian@cygnus.com)
-
-       * tc-m68k.c (m68k_ip, m68k_ip_op, get_num, try_moto_index): merge
-        Motorola and MIT syntax; gas can now assemble either type of
-        file.
-       tc-m68kmote.c, tc-m68kmote.h: removed now superfluous files.
-       From Steve Chamberlain:
-       m68kcoff.mt: for m68k COFF.
-       obj-coffbfd.c: (fixup_mdeps) added
-        (size_section) removed bad sanity check
-        (fill_section) added rs_machine_dependent case
-        (write_object_file) call fixup_mdeps
-        (fixup_segment) set fx_subsy to 0.
-       obj-coffbfd.h: define WORKING_DOT_WORD (too hard to support) and
-        handle m68k.
-       tc-m68k.c, config/tc-m68k.h: added m68k COFF support and Motorala
-        pseudo ops.
-
-Fri Aug 28 16:25:22 1992  Ian Lance Taylor  (ian@cygnus.com)
-
-       * obj-bout.h, obj-bout.c (obj_header_append, obj_symbol_to_chars),
-       tc-i960.c (md_ri_to_chars): Always output bout object file in
-       little endian byte order (used to use endianness of host).
-
-Tue Aug 25 15:11:08 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
-
-       * z8k.c, z8k.h, z8k.mt: z8000 support stuff
-
-Mon Aug 24 12:45:12 1992  Ian Lance Taylor  (ian@cygnus.com)
-
-       * tc-m68k.c: use TARGET_CPU to choose default cpu type.
-
-       * te-generic.h: default to LOCAL_LABELS_DOLLAR and LOCAL_LABELS_FB
-       so that we can assemble hand-written libgcc code.
-
-Wed Aug 19 11:20:59 1992  Ian Lance Taylor  (ian@cygnus.com)
-
-       * tc-m68k.c, tc-m68kmote.c: the cas2 instruction is supposed to be
-       written with indirection on the last two operands, which can be
-       either data or address registers.  Added a new operand type 'r'
-       which accepts either register type.  Added '(' to notend stuff in
-       tc-m68kmote.c to accept (a0):(a2) in cas2 instruction.
-
-Tue Aug 11 12:58:14 1992  Ken Raeburn  (raeburn@cygnus.com)
-
-       * sparc.mt: New file.
-
-Mon Aug 10 14:37:08 1992  Per Bothner  (bothner@cygnus.com)
-
-       * tc-m68k.c: ".align N" means align to N-byte boundary *only*
-       if TN_SUN3; otherwise align to 2**N-byte bounary.
-
-Thu Aug  6 12:08:42 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
-
-       * config/tc-h8300.c: if a :8 is seen after an operand, fill top
-       two bytes of any constant with 0xff:
-
-Wed Aug  5 01:54:34 1992  John Gilmore  (gnu at cygnus.com)
-
-       * tc-m68k.c (try_index):  Error if index scaling specified and
-       assembling for an older CPU than a 68020.
-
-Mon Jul  6 17:09:32 1992  Steve Chamberlain  (sac@cygnus.com)
-
-       * obj-coffbfd.c (fill_section): mark .lit sections as STYP_LIT
-
-Tue Jun  9 07:50:46 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
-
-       * tc-m68k.c (m68kip): Fix typo so that only arch's >=68020 do
-       pcrel data stuff. (md_estimate_size_before_relax): when relaxing a
-       68010 bxx into a bra+6 jmpxx, put the bytes of the jmp opcode into
-       the right place. (s_bss): Don't put .bss stuff into SEG_DATA, put
-       it into SEG_BSS
-
-Thu May 28 11:20:27 1992  Jim Wilson  (wilson@sphagnum.cygnus.com)
-
-       * tc-sparc.c: Use new ARCHITECTURES_CONFLICT_P macro.  Mention new
-       -Asparclite flag.
-
-Mon May  4 18:56:19 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
-
-       * obj-coffbfd.c: use is a synonym for section, (do_relocs_for):
-       calc the base of relocs correctly.
-       * tc-a29k.c (parse_operand): allow expressions to be in any section.
-
-Thu Mar 12 04:42:38 1992  K. Richard Pixley  (rich@cygnus.com)
-
-       * tc-m68k.h, te-sun3.h: moved LOCAL_LABELS_FB definition from
-         tc-m68k.h to te-sun3.h. 
-
-Wed Mar 11 23:34:46 1992  K. Richard Pixley  (rich@cygnus.com)
-
-       * te-sun3.h: add LOCAL_LABELS_DOLLAR.
-
-Fri Feb 21 06:22:15 1992  K. Richard Pixley  (rich@rtl.cygnus.com)
-
-       * obj-aout.c: do not include stab.gnu.h if NO_LISTING.
-
-       * tc-i860.c, a.out.gnu.h: move i860 relocs to a proper place.
-
-       * a.out.h: removed.
-
-Fri Feb 21 02:17:22 1992  Minh Tran-Le (TRANLE@INTELLICORP.COM)
-
-       * tc-i386.c: tc-i386.c: added handling of the following opcodes:
-         i/o opcodes - inb, inw, outb and outw.  string manipulation with
-         att syntax - scmp, slod, smov, ssca, ssto.
-
-Fri Feb 21 01:53:50 1992  Minh Tran-Le (TRANLE@INTELLICORP.COM)
-
-       * obj-coff.c: (for aix386) Moved the symbols .text, .data and .bss
-         to just after .file .
-
-         In obj_crawl_symbol_chain() where it tries to put the external
-         symbols apart, with the condition:
-           (!S_IS_DEFINED(symbolP) &&
-            !S_IS_DEBUG(symbolP) &&
-            !SF_GET_STATICS(symbolP))
-         it was moving too many symbols out. So I switch it back to the
-         condition:
-           (S_GET_STORAGE_CLASS(symbolP) == C_EXT && !SF_GET_FUNCTION(symbolP))
-
-         In obj_emit_relocations() added the conditional on KEEP_RELOC_INFO
-         so that we don't use the F_RELFLG which make the linker complain
-         that somebody has stripped the relocation info.
-
-         Also, the AIX ld program require that the relocation table
-         is sorted by r_vaddr like the standard ATT assembler does.
-
-         [he also changed the sizeof(struct ...)'s into the coff
-         style FOOSZ macros.  I'm not sure this is right, but I can't
-         remember why.  xoxorich.]
-
-Tue Feb 18 02:11:10 1992  K. Richard Pixley  (rich at cygnus.com)
-
-       * tc-m88k.[hc]: pulled in from hack's unfinished work.  These
-         aren't yet integrated.
-
-       * tc-i860.[hc]: blew off the dust.  Something must still be done
-         about conflicting relocation types.
-
-       * tc-ns32k.c: Replaced previous tc_aout_fix_to_chars stub with the
-         real thing.
-
-       * tc-i960.c, tc-sparc.c: white space and comments only.
-
-       * tc-a29k.h: delete duplicate macro definition.
-
-       * new file atof-ns32k.c copied from hack's last unreleased gas.
-
-
diff --git a/gas/config/a.out.gnu.h b/gas/config/a.out.gnu.h
deleted file mode 100755 (executable)
index 5f39275..0000000
+++ /dev/null
@@ -1,431 +0,0 @@
-/* This file is a.out.gnu.h
-
-   Copyright (C) 1987-1992 Free Software Foundation, Inc.
-   
-   This file is part of GAS, the GNU Assembler.
-   
-   GAS is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
-   any later version.
-   
-   GAS is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-   
-   You should have received a copy of the GNU General Public License
-   along with GAS; see the file COPYING.  If not, write to
-   the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-#ifndef __A_OUT_GNU_H__
-#define __A_OUT_GNU_H__
-
-/* There are two main flavours of a.out, one which uses the standard
-   relocations, and one which uses extended relocations.
-
-   Today, the extended reloc uses are
-   TC_SPARC, TC_A29K
-
-   each must define the enum reloc_type
-
-*/
-
-#define USE_EXTENDED_RELOC (defined(TC_SPARC) || defined(TC_A29K)) 
-
-#if defined(TC_SPARC) || defined(TC_A29K)
-enum reloc_type {
-       RELOC_8,        RELOC_16,        RELOC_32, /* simple relocations */
-       RELOC_DISP8,    RELOC_DISP16,    RELOC_DISP32, /* pc-rel displacement */
-       RELOC_WDISP30,  RELOC_WDISP22,
-       RELOC_HI22,     RELOC_22,
-       RELOC_13,       RELOC_LO10,
-       RELOC_SFA_BASE, RELOC_SFA_OFF13,
-       RELOC_BASE10,   RELOC_BASE13,    RELOC_BASE22, /* P.I.C. (base-relative) */
-       RELOC_PC10,     RELOC_PC22,     /* for some sort of pc-rel P.I.C. (?) */
-       RELOC_JMP_TBL,          /* P.I.C. jump table */
-       RELOC_SEGOFF16,         /* reputedly for shared libraries somehow */
-       RELOC_GLOB_DAT,  RELOC_JMP_SLOT, RELOC_RELATIVE,
-       RELOC_11,
-       RELOC_WDISP2_14,
-       RELOC_WDISP19,
-       RELOC_HHI22,
-       RELOC_HLO10,
-       
-       /* 29K relocation types */
-       RELOC_JUMPTARG, RELOC_CONST,     RELOC_CONSTH,
-       
-       RELOC_WDISP14, RELOC_WDISP21,
-       
-       NO_RELOC,
-};
-#endif /* TC_SPARC or TC_A29K */
-
-
-#define __GNU_EXEC_MACROS__
-
-#ifndef __STRUCT_EXEC_OVERRIDE__
-
-/* This is the layout on disk of a Unix V7, Berkeley, SunOS, Vax Ultrix
-   "struct exec".  Don't assume that on this machine, the "struct exec"
-   will lay out the same sizes or alignments.  */
-
-struct exec_bytes {
-       unsigned char a_info[4];
-       unsigned char a_text[4];
-       unsigned char a_data[4];
-       unsigned char a_bss[4];
-       unsigned char a_syms[4];
-       unsigned char a_entry[4];
-       unsigned char a_trsize[4];
-       unsigned char a_drsize[4];
-};
-
-/* How big the "struct exec" is on disk */
-#define        EXEC_BYTES_SIZE (8 * 4)
-
-/* This is the layout in memory of a "struct exec" while we process it.  */
-
-struct exec
-{
-       unsigned long a_info;           /* Use macros N_MAGIC, etc for access */
-       unsigned a_text;                /* length of text, in bytes */
-       unsigned a_data;                /* length of data, in bytes */
-       unsigned a_bss;         /* length of uninitialized data area for file, in bytes */
-       unsigned a_syms;                /* length of symbol table data in file, in bytes */
-       unsigned a_entry;               /* start address */
-       unsigned a_trsize;              /* length of relocation info for text, in bytes */
-       unsigned a_drsize;              /* length of relocation info for data, in bytes */
-};
-
-#endif /* __STRUCT_EXEC_OVERRIDE__ */
-
-/* these go in the N_MACHTYPE field */
-/* These symbols could be defined by code from Suns...punt 'em */
-#undef M_UNKNOWN
-#undef M_68010
-#undef M_68020
-#undef M_SPARC
-enum machine_type {
-       M_UNKNOWN = 0,
-       M_68010 = 1,
-       M_68020 = 2,
-       M_SPARC = 3,
-       /* skip a bunch so we don't run into any of sun's numbers */
-       M_386 = 100,
-       M_29K = 101,
-       M_RS6000 = 102, /* IBM RS/6000 */
-       /* HP/BSD formats */
-       M_HP200 = 200,  /* hp200 (68010) BSD binary */
-       M_HP300 = 300,  /* hp300 (68020+68881) BSD binary */
-       M_HPUX23 = 0x020C,      /* hp200/300 HPUX binary */
-};
-
-#define N_MAGIC(exec) ((exec).a_info & 0xffff)
-#define N_MACHTYPE(exec) ((enum machine_type)(((exec).a_info >> 16) & 0xff))
-#define N_FLAGS(exec) (((exec).a_info >> 24) & 0xff)
-#define N_SET_INFO(exec, magic, type, flags) \
-    ((exec).a_info = ((magic) & 0xffff) \
-     | (((int)(type) & 0xff) << 16) \
-     | (((flags) & 0xff) << 24))
-#define N_SET_MAGIC(exec, magic) \
-    ((exec).a_info = (((exec).a_info & 0xffff0000) | ((magic) & 0xffff)))
-
-#define N_SET_MACHTYPE(exec, machtype) \
-    ((exec).a_info = \
-     ((exec).a_info&0xff00ffff) | ((((int)(machtype))&0xff) << 16))
-
-#define N_SET_FLAGS(exec, flags) \
-    ((exec).a_info = \
-     ((exec).a_info&0x00ffffff) | (((flags) & 0xff) << 24))
-
-/* Code indicating object file or impure executable.  */
-#define OMAGIC 0407
-/* Code indicating pure executable.  */
-#define NMAGIC 0410
-/* Code indicating demand-paged executable.  */
-#define ZMAGIC 0413
-
-/* Virtual Address of text segment from the a.out file.  For OMAGIC,
-   (almost always "unlinked .o's" these days), should be zero.
-   For linked files, should reflect reality if we know it.  */
-
-#ifndef N_TXTADDR
-#define N_TXTADDR(x)   (N_MAGIC(x)==OMAGIC? 0 : TEXT_START_ADDR)
-#endif
-
-#ifndef N_BADMAG
-#define N_BADMAG(x)      (N_MAGIC(x) != OMAGIC         \
-                          && N_MAGIC(x) != NMAGIC              \
-                          && N_MAGIC(x) != ZMAGIC)
-#endif
-
-/* By default, segment size is constant.  But on some machines, it can
-   be a function of the a.out header (e.g. machine type).  */
-#ifndef        N_SEGSIZE
-#define        N_SEGSIZE(x)    SEGMENT_SIZE
-#endif
-    
-    /* This complexity is for encapsulated COFF support */
-#ifndef _N_HDROFF
-#define _N_HDROFF(x)   (N_SEGSIZE(x) - sizeof (struct exec))
-#endif
-
-#ifndef N_TXTOFF
-#define N_TXTOFF(x)    (N_MAGIC(x) == ZMAGIC ? \
-                        _N_HDROFF((x)) + sizeof (struct exec) :        \
-                        sizeof (struct exec))
-#endif
-
-
-#ifndef N_DATOFF
-#define N_DATOFF(x)    ( N_TXTOFF(x) + (x).a_text )
-#endif
-
-#ifndef N_TRELOFF
-#define N_TRELOFF(x)   ( N_DATOFF(x) + (x).a_data )
-#endif
-
-#ifndef N_DRELOFF
-#define N_DRELOFF(x)   ( N_TRELOFF(x) + (x).a_trsize )
-#endif
-
-#ifndef N_SYMOFF
-#define N_SYMOFF(x)    ( N_DRELOFF(x) + (x).a_drsize )
-#endif
-
-#ifndef N_STROFF
-#define N_STROFF(x)    ( N_SYMOFF(x) + (x).a_syms )
-#endif
-
-/* Address of text segment in memory after it is loaded.  */
-#ifndef N_TXTADDR
-#define        N_TXTADDR(x)    0
-#endif
-    
-#ifndef N_DATADDR
-#define N_DATADDR(x) \
-    (N_MAGIC(x)==OMAGIC? (N_TXTADDR(x)+(x).a_text) \
-     :  (N_SEGSIZE(x) + ((N_TXTADDR(x)+(x).a_text-1) & ~(N_SEGSIZE(x)-1))))
-#endif
-
-/* Address of bss segment in memory after it is loaded.  */
-#define N_BSSADDR(x) (N_DATADDR(x) + (x).a_data)
-\f
-struct nlist {
-       union {
-               char *n_name;
-               struct nlist *n_next;
-               long n_strx;
-       } n_un;
-       unsigned char n_type;
-       char n_other;
-       short n_desc;
-       unsigned long n_value;
-};
-
-#define N_UNDF 0
-#define N_ABS 2
-#define N_TEXT 4
-#define N_DATA 6
-#define N_BSS 8
-#define        N_COMM  0x12            /* common (visible in shared lib commons) */
-#define N_FN 0x1F              /* File name of a .o file */
-
-/* Note: N_EXT can only usefully be OR-ed with N_UNDF, N_ABS, N_TEXT,
-   N_DATA, or N_BSS.  When the low-order bit of other types is set,
-   (e.g. N_WARNING versus N_FN), they are two different types.  */
-#define N_EXT 1
-#define N_TYPE 036
-#define N_STAB 0340
-
-/* The following type indicates the definition of a symbol as being
-   an indirect reference to another symbol.  The other symbol
-   appears as an undefined reference, immediately following this symbol.
-   
-   Indirection is asymmetrical.  The other symbol's value will be used
-   to satisfy requests for the indirect symbol, but not vice versa.
-   If the other symbol does not have a definition, libraries will
-   be searched to find a definition.  */
-
-#define N_INDR 0xa
-
-/* The following symbols refer to set elements.
-   All the N_SET[ATDB] symbols with the same name form one set.
-   Space is allocated for the set in the text section, and each set
-   element's value is stored into one word of the space.
-   The first word of the space is the length of the set (number of elements).
-   
-   The address of the set is made into an N_SETV symbol
-   whose name is the same as the name of the set.
-   This symbol acts like a N_DATA global symbol
-   in that it can satisfy undefined external references.  */
-
-/* These appear as input to LD, in a .o file.  */
-#define        N_SETA  0x14            /* Absolute set element symbol */
-#define        N_SETT  0x16            /* Text set element symbol */
-#define        N_SETD  0x18            /* Data set element symbol */
-#define        N_SETB  0x1A            /* Bss set element symbol */
-
-/* This is output from LD.  */
-#define N_SETV 0x1C            /* Pointer to set vector in data area.  */
-
-/* Warning symbol. The text gives a warning message, the next symbol
-   in the table will be undefined. When the symbol is referenced, the
-   message is printed.  */
-
-#define        N_WARNING 0x1e
-\f
-/* This structure describes a single relocation to be performed.
-   The text-relocation section of the file is a vector of these structures,
-   all of which apply to the text section.
-   Likewise, the data-relocation section applies to the data section.  */
-
-/* The following enum and struct were borrowed from SunOS's
-   /usr/include/sun4/a.out.h  and extended to handle
-   other machines.  It is currently used on SPARC and AMD 29000.
-   
-   reloc_ext_bytes is how it looks on disk.  reloc_info_extended is
-   how we might process it on a native host.  */
-#if USE_EXTENDED_RELOC
-
-struct reloc_ext_bytes {
-       unsigned char   r_address[4];
-       unsigned char r_index[3];
-       unsigned char r_bits[1];
-       unsigned char r_addend[4];
-};
-
-
-#define        RELOC_EXT_BITS_EXTERN_BIG       0x80
-#define        RELOC_EXT_BITS_EXTERN_LITTLE    0x01
-
-#define        RELOC_EXT_BITS_TYPE_BIG         0x1F
-#define        RELOC_EXT_BITS_TYPE_SH_BIG      0
-#define        RELOC_EXT_BITS_TYPE_LITTLE      0xF8
-#define        RELOC_EXT_BITS_TYPE_SH_LITTLE   3
-
-#define        RELOC_EXT_SIZE  12              /* Bytes per relocation entry */
-
-struct reloc_info_extended
-{
-       unsigned long r_address;
-       unsigned int  r_index:24;
-# define       r_symbolnum  r_index
-       unsigned        r_extern:1;
-       unsigned        :2;
-       /*  RS/6000 compiler does not support enum bitfield 
-           enum reloc_type r_type:5; */
-       enum reloc_type r_type;
-       long int        r_addend;
-};
-
-#else
-
-/* The standard, old-fashioned, Berkeley compatible relocation struct */
-
-
-
-#ifdef TC_I860
-/* NOTE: three bits max, see struct reloc_info_i860.r_type */
-enum i860_reloc_type {
-       NO_RELOC = 0, BRADDR, LOW0, LOW1, LOW2, LOW3, LOW4, SPLIT0, SPLIT1, SPLIT2, RELOC_32,
-};
-
-typedef enum i860_reloc_type reloc_type;
-
- /* NOTE: two bits max, see reloc_info_i860.r_type */
-enum highlow_type {
-       NO_SPEC = 0, PAIR, HIGH, HIGHADJ,
-};
-
-
-struct reloc_info_i860
-{
-       unsigned long r_address;
-       /*
-        * Using bit fields here is a bad idea because the order is not portable. :-(
-        */
-       unsigned int r_symbolnum: 24;
-       unsigned int r_pcrel    : 1;
-       unsigned int r_extern   : 1;
-       /* combining the two field simplifies the argument passing in "new_fix()" */
-       /* and is compatible with the existing Sparc #ifdef's */
-       /* r_type:  highlow_type - bits 5,4; reloc_type - bits 3-0 */
-       unsigned int r_type     : 6;
-       long r_addend;
-};
-
-#endif /* TC_I860 */
-
-
-struct reloc_std_bytes {
-       unsigned char   r_address[4];
-       unsigned char r_index[3];
-       unsigned char r_bits[1];
-};
-
-#define        RELOC_STD_BITS_PCREL_BIG        0x80
-#define        RELOC_STD_BITS_PCREL_LITTLE     0x01
-
-#define        RELOC_STD_BITS_LENGTH_BIG       0x60
-#define        RELOC_STD_BITS_LENGTH_SH_BIG    5       /* To shift to units place */
-#define        RELOC_STD_BITS_LENGTH_LITTLE    0x06
-#define        RELOC_STD_BITS_LENGTH_SH_LITTLE 1
-
-#define        RELOC_STD_BITS_EXTERN_BIG       0x10
-#define        RELOC_STD_BITS_EXTERN_LITTLE    0x08
-
-#define        RELOC_STD_BITS_BASEREL_BIG      0x08
-#define        RELOC_STD_BITS_BASEREL_LITTLE   0x08
-
-#define        RELOC_STD_BITS_JMPTABLE_BIG     0x04
-#define        RELOC_STD_BITS_JMPTABLE_LITTLE  0x04
-
-#define        RELOC_STD_BITS_RELATIVE_BIG     0x02
-#define        RELOC_STD_BITS_RELATIVE_LITTLE  0x02
-
-#define        RELOC_STD_SIZE  8               /* Bytes per relocation entry */
-
-#endif /* USE_EXTENDED_RELOC */
-
-#ifndef CUSTOM_RELOC_FORMAT
-struct relocation_info
-{
-       /* Address (within segment) to be relocated.  */
-       int r_address;
-       /* The meaning of r_symbolnum depends on r_extern.  */
-       unsigned int r_symbolnum:24;
-       /* Nonzero means value is a pc-relative offset
-          and it should be relocated for changes in its own address
-          as well as for changes in the symbol or section specified.  */
-       unsigned int r_pcrel:1;
-       /* Length (as exponent of 2) of the field to be relocated.
-          Thus, a value of 2 indicates 1<<2 bytes.  */
-       unsigned int r_length:2;
-       /* 1 => relocate with value of symbol.
-          r_symbolnum is the index of the symbol
-          in file's the symbol table.
-          0 => relocate with the address of a segment.
-          r_symbolnum is N_TEXT, N_DATA, N_BSS or N_ABS
-          (the N_EXT bit may be set also, but signifies nothing).  */
-       unsigned int r_extern:1;
-       /* The next three bits are for SunOS shared libraries, and seem to
-          be undocumented.  */
-       unsigned int r_baserel:1;       /* Linkage table relative */
-       unsigned int r_jmptable:1;      /* pc-relative to jump table */
-       
-#ifdef TC_NS32K
-#define r_bsr  r_baserel
-#define r_disp r_jmptable
-#endif /* TC_NS32K */
-       
-       unsigned int r_relative:1;      /* "relative relocation" */
-       /* unused */
-       unsigned int r_pad:1;           /* Padding -- set to zero */
-};
-#endif /* CUSTOM_RELOC_FORMAT */
-
-#endif /* __A_OUT_GNU_H__ */
-
-/* end of a.out.gnu.h */
diff --git a/gas/config/a.out.h b/gas/config/a.out.h
deleted file mode 100755 (executable)
index 25c6195..0000000
+++ /dev/null
@@ -1,150 +0,0 @@
-/* This file describes the a.out file format
-   Copyright (C) 1987, 1992 Free Software Foundation, Inc.
-   
-   This file is part of GAS, the GNU Assembler.
-   
-   GAS is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
-   any later version.
-   
-   GAS is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-   
-   You should have received a copy of the GNU General Public License
-   along with GAS; see the file COPYING.  If not, write to
-   the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-#ifdef USE_HP_INC_HDR
-#include "../binutils/hp-include/a.out.h"
-#else
-
-#ifdef USE_SYSTEM_HDR
-#include "/usr/include/a.out.h"
-#else
-
-#ifdef USE_HP_HDR
-/* The `exec' structure and overall layout must be close to HP's when
-   we are running on an HP system, otherwise we will not be able to
-   execute the resulting file. */
-
-struct exec
-{
-       unsigned short a_machtype;      /* machine type */
-       unsigned short a_magic; /* magic number */
-       unsigned long a_spare1;
-       unsigned long a_spare2;
-       unsigned long a_text;           /* length of text, in bytes */
-       unsigned long a_data;           /* length of data, in bytes */
-       unsigned long a_bss;            /* length of uninitialized data area for file, in bytes */
-       unsigned long a_trsize; /* length of relocation info for text, in bytes */
-       unsigned long a_drsize; /* length of relocation info for data, in bytes */
-       unsigned long a_spare3; /* HP = pascal interface size */
-       unsigned long a_spare4; /* HP = symbol table size */
-       unsigned long a_spare5; /* HP = debug name table size */
-       unsigned long a_entry;  /* start address */
-       unsigned long a_spare6; /* HP = source line table size */
-       unsigned long a_spare7; /* HP = value table size */
-       unsigned long a_syms;           /* length of symbol table data in file, in bytes */
-       unsigned long a_spare8;
-};
-
-#define N_MAGIC(exec) ((exec) . a_magic)
-#define N_MACHTYPE(exec) ((exec) . a_machtype)
-#define N_SET_MAGIC(exec, magic) (((exec) . a_magic) = (magic))
-#define N_SET_MACHTYPE(exec, machtype) (((exec) . a_machtype) = (machtype))
-
-#define N_BADMAG(x) ((_N_BADMAG (x)) || (_N_BADMACH (x)))
-
-#define _N_BADMACH(x) \
-    (((N_MACHTYPE (x)) != HP9000S200_ID) \
-     && ((N_MACHTYPE (x)) != HP98x6_ID))
-
-#define _N_BADMAG(x) \
-    (((x).a_magic)!=OMAGIC && ((x).a_magic)!=NMAGIC && ((x).a_magic)!=ZMAGIC)
-
-#define HP98x6_ID 0x20A
-#define HP9000S200_ID 0x20C
-
-#else
-
-/* A Generic machine. . . */
-
-/* JF I'm not sure where this file came from.  I put the permit.text message in
-   it anyway.  This file came to me as part of the original VAX assembler, but had
-   no copyright notices in it. */
-
-struct exec {
-       long    a_magic;        /* number identifies as .o file and gives type of such. */
-       unsigned a_text;        /* length of text, in bytes */
-       unsigned a_data;        /* length of data, in bytes */
-       unsigned a_bss;         /* length of uninitialized data area for file, in bytes */
-       unsigned a_syms;        /* length of symbol table data in file, in bytes */
-       unsigned a_entry;       /* start address */
-       unsigned a_trsize;      /* length of relocation info for text, in bytes */
-       unsigned a_drsize;      /* length of relocation info for data, in bytes */
-};
-
-#define N_BADMAG(x) \
-    (((x).a_magic)!=OMAGIC && ((x).a_magic)!=NMAGIC && ((x).a_magic)!=ZMAGIC)
-
-#endif
-
-/* From here down is common to both the HP and the generic machine */
-#define OMAGIC 0407
-#define NMAGIC 0410
-#define ZMAGIC 0413
-
-
-#define N_TXTOFF(x) \
-    ((x).a_magic == ZMAGIC ? 1024 : sizeof(struct exec))
-
-#define N_SYMOFF(x) \
-    (N_TXTOFF(x) + (x).a_text + (x).a_data + (x).a_trsize + (x).a_drsize)
-
-#define N_STROFF(x) \
-    (N_SYMOFF(x) + (x).a_syms)
-
-struct nlist {
-       union {
-               char    *n_name;
-               struct nlist *n_next;
-               long    n_strx;
-       } n_un;
-       char    n_type;
-       char    n_other;
-       short   n_desc;
-       unsigned n_value;
-};
-
-#define N_UNDF 0
-#define N_ABS  2
-#define N_TEXT 4
-#define N_DATA 6
-#define N_BSS  8
-#define N_FN   31              /* JF: Someone claims this should be 31 instead of
-                                  15.  I just inherited this file; I didn't write
-                                  it.  Who is right? */
-
-
-#define N_EXT 1
-#define N_TYPE 036
-#define N_STAB 0340
-
-struct relocation_info {
-       int r_address;
-       unsigned r_symbolnum:24;
-       unsigned r_pcrel:1;
-       unsigned r_length:2;
-       unsigned r_extern:1;
-       unsigned r_bsr:1;       /* OVE: used on ns32k based systems, if you want */
-       unsigned r_disp:1;      /* OVE: used on ns32k based systems, if you want */
-       unsigned nuthin:2;
-};
-
-#endif
-#endif
-
-/* end of a.out.h */
diff --git a/gas/config/coff.gnu.h b/gas/config/coff.gnu.h
deleted file mode 100755 (executable)
index fd21e1a..0000000
+++ /dev/null
@@ -1,783 +0,0 @@
-/* coff.gnu.h
-   Copyright (C) 1987, 1992 Free Software Foundation, Inc.
-   
-   This file is part of GAS, the GNU Assembler.
-   
-   GAS is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
-   any later version.
-   
-   GAS is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-   
-   You should have received a copy of the GNU General Public License
-   along with GAS; see the file COPYING.  If not, write to
-   the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-/*
- * At this point I'm sure this file is right for i960 and I'm pretty sure it's
- * right for a29k, although it hasn't been tested rigorously.  Please feel free
- * to add your own machine's description here.  Without that info, it isn't
- * possible to build cross development tools from elsewhere nor is it easy to
- * continue to support your machines format.
- *
- * The TC_foo ifdef's are mine.  They are what gas uses.  The other ifdef's
- * remain for documentation from other scavenged files.   xoxorich.
- */
-
-/********************** FILE HEADER **********************/
-
-struct filehdr {
-       unsigned short  f_magic;        /* magic number                 */
-       unsigned short  f_nscns;        /* number of sections           */
-       long            f_timdat;       /* time & date stamp            */
-       long            f_symptr;       /* file pointer to symtab       */
-       long            f_nsyms;        /* number of symtab entries     */
-       unsigned short  f_opthdr;       /* sizeof(optional hdr)         */
-       unsigned short  f_flags;        /* flags                        */
-};
-
-/* Bits for f_flags:
- *     F_RELFLG        relocation info stripped from file
- *     F_EXEC          file is executable (no unresolved externel references)
- *     F_LNNO          line nunbers stripped from file
- *     F_LSYMS         local symbols stripped from file
- *     F_AR32WR        file has byte ordering of an AR32WR machine (e.g. vax)
- */
-#define F_RELFLG       (0x0001)
-#define F_EXEC         (0x0002)
-#define F_LNNO         (0x0004)
-#define F_LSYMS                (0x0008)
-
-#ifdef TC_I960
-#define F_AR32WR       (0x0010) /* File has 32 bits per word, least
-                                   significant byte first. */
-#else /* TC_I960 */
-#define F_AR32WR       (0x0100)
-#endif /* TC_I960 */
-
-#define F_MINMAL       (0x0010) /* ??? */
-#define F_UPDATE       (0x0020) /* ??? */
-#define F_SWABD                (0x0040) /* ??? */
-#define F_AR16WR       (0x0080) /* File has the byte ordering used by
-                                   the PDP*-11/70 processor. */
-#define F_AR32W                (0x0200) /* File has 32 bits per word, most
-                                   significant byte first. */
-
-/*
- *     Intel 80960 (I960) processor flags.
- *     F_I960TYPE == mask for processor type field. 
- */
-
-#define        F_I960TYPE      (0xf000)
-#define        F_I960CORE      (0x1000)
-#define        F_I960KB        (0x2000)
-#define        F_I960SB        (0x2000)
-#define        F_I960MC        (0x3000)
-#define        F_I960XA        (0x4000)
-#define        F_I960CA        (0x5000)
-#define        F_I960KA        (0x6000)
-#define        F_I960SA        (0x6000)
-
-/*
- * i80960 Magic Numbers
- */
-
-#define I960ROMAGIC    (0x160) /* read-only text segments */
-#define I960RWMAGIC    (0x161) /* read-write text segments */
-
-#define I960BADMAG(x) (((x).f_magic != I960ROMAGIC) && ((x).f_magic != I960RWMAGIC))
-
-#define        SIPFBOMAGIC     (0x17a) /* Am29000 (Byte 0 is MSB - Big Endian) */
-#define        SIPRBOMAGIC     (0x17b) /* Am29000 (Byte 0 is LSB - Little Endian) */
-
-#define A29KBADMAG(x)  (((x).f_magic != SIPFBOMAGIC) && ((x).f_magic != SIPRBOMAGIC))
-
-#ifdef TE_I386AIX
-# define I386MAGIC     (0x175) /* Danbury AIX C compiler       */
-# define I386SVMAGIC   (0x14c) /* System V C Compiler          */
-# define I386BADMAG(x)  (((x).f_magic!=I386MAGIC) && \
-                        ((x).f_magic!=I386SVMAGIC))
-#else /* not TE_I386AIX */
-# define I386MAGIC     0x14c
-# define I386BADMAG(x) (((x).f_magic!=I386MAGIC))
-#endif /* not TE_I386AIX */
-
-#define        FILHDR  struct filehdr
-#define        FILHSZ  sizeof(FILHDR)
-
-
-/********************** AOUT "OPTIONAL HEADER" **********************/
-
-typedef struct {
-       unsigned long   phys_addr;
-       unsigned long   bitarray;
-} TAGBITS;
-
-/*  These appear to be used only by exec(2).  I don't know who cares
-    about them in a cross development environment.  In any case, this
-    is my collection after researching the issue for a few hours.
-    Apparently, most have these have remained essentially unchanged
-    since v7 days, although a few new ones have been added.  xoxorich. */
-
-#define BAD0MAGIC      (0401) /* (?) "lpd (UNIX/RT)" */
-#define BAD1MAGIC      (0405) /* (?) overlay */
-#define        OMAGIC          (0407) /* old impure format. data immediately
-                                 follows text. both sections are rw. */
-#define        NMAGIC          (0410) /* split i&d, read-only text */
-#define A_MAGIC3       (0411) /* (?) "separated I&D" */
-#define        ZMAGIC          (0413) /* like NMAGIC, but demand loaded */
-#define PAGEMAGIC2     (0414) /* (?) like ZMAGIC, but address zero
-                                 explicitly unmapped. */
-#define REGMAGIC       (0414) /* (?) a PAGEMAGIC2 alias? */
-#define PAGEMAGIC3     (0415) /* (?) like ZMAGIC, but address zero mapped. */
-#define A_MAGIC5       (0437) /* (?) "system overlay, separated I&D" */
-/* intended for non-unix cross development */
-#define SASMAGIC       (010000) /* Single Address Space */    
-#define MASMAGIC       (020000) /* (?) "Multiple (separate I & D) Address Spaces" */
-
-typedef        struct aouthdr {
-       short           magic;  /* type of file                         */
-       short           vstamp; /* version stamp                        */
-       unsigned long   tsize;  /* text size in bytes, padded to FW bdry*/
-       unsigned long   dsize;  /* initialized data "  "                */
-       unsigned long   bsize;  /* uninitialized data "   "             */
-#if U3B
-       unsigned long   dum1;
-       unsigned long   dum2;   /* pad to entry point   */
-#endif
-       unsigned long   entry;  /* entry pt.                            */
-       unsigned long   text_start;     /* base of text used for this file */
-       unsigned long   data_start;     /* base of data used for this file */
-       /* CAREFUL: some formats omit the tagentries member. */
-       unsigned long   tagentries;     /* number of tag entries to
-                                          follow (always zero for i960) */
-} AOUTHDR;
-
-/* return a pointer to the tag bits array */
-
-#define TAGPTR(aout) ((TAGBITS *) (&(aout.tagentries)+1))
-
-/* compute size of a header */
-
-/*#define AOUTSZ(aout) (sizeof(AOUTHDR)+(aout.tagentries*sizeof(TAGBITS)))*/
-#define AOUTSZ (sizeof(AOUTHDR))
-
-
-/********************** STORAGE CLASSES **********************/
-
-#define C_EFCN         -1      /* physical end of function */
-#define C_NULL         0
-#define C_AUTO         1       /* automatic variable */
-#define C_EXT          2       /* external symbol */
-#define C_STAT         3       /* static */
-#define C_REG          4       /* register variable */
-#define C_EXTDEF       5       /* external definition */
-#define C_LABEL                6       /* label */
-#define C_ULABEL       7       /* undefined label */
-#define C_MOS          8       /* member of structure */
-#define C_ARG          9       /* function argument */
-#define C_STRTAG       10      /* structure tag */
-#define C_MOU          11      /* member of union */
-#define C_UNTAG                12      /* union tag */
-#define C_TPDEF                13      /* type definition */
-#define C_USTATIC      14      /* undefined static */
-#define C_ENTAG                15      /* enumeration tag */
-#define C_MOE          16      /* member of enumeration */
-#define C_REGPARM      17      /* register parameter */
-#define C_FIELD                18      /* bit field */
-
-#ifdef TC_I960
-#define C_AUTOARG      19      /* auto argument */
-#define C_LASTENT      20      /* dummy entry (end of block) */
-#endif /* TC_I960 */
-
-#ifdef TC_A29K
-#define C_GLBLREG      19              /* global register */
-#define C_EXTREG       20              /* external global register */
-#define        C_DEFREG        21              /* ext. def. of global register */
-#define C_STARTOF      22              /* as29 $SIZEOF and $STARTOF symbols */
-#endif /* TC_A29K */
-
-#define C_BLOCK                100     /* ".bb" or ".eb" */
-#define C_FCN          101     /* ".bf" or ".ef" */
-#define C_EOS          102     /* end of structure */
-#define C_FILE         103     /* file name */
-#define C_LINE         104     /* line # reformatted as symbol table entry */
-#define C_ALIAS                105     /* duplicate tag */
-#define C_HIDDEN       106     /* ext symbol in dmert public lib. like static,
-                                  used to avoid name conflicts. */
-
-#ifdef TC_I960
-/* New storage classes for 80960 */
-#define C_SCALL                107     /* Procedure reachable via system call  */
-/* C_LEAFPROC is obsolete.  Use C_LEAFEXT or C_LEAFSTAT */
-#define C_LEAFPROC     108     /* Leaf procedure, "call" via BAL */
-#define C_LEAFEXT       108
-#define C_OPTVAR       109     /* Optimized variable */
-#define C_DEFINE       110     /* Preprocessor #define */
-#define C_PRAGMA       111     /* Advice to compiler or linker */
-#define C_SEGMENT      112     /* 80960 segment name */
-#define C_LEAFSTAT      113     /* Static leaf */
-#endif /* TC_I960 */
-
-#ifdef TC_A29K
-#define C_SHADOW       107 /* shadow symbol */
-#endif /* TC_A29K */
-
-/********************** SECTION HEADER **********************/
-
-struct scnhdr {
-       char            s_name[8];      /* section name */
-       long            s_paddr;        /* physical address, aliased s_nlib */
-       long            s_vaddr;        /* virtual address */
-       long            s_size;         /* section size */
-       long            s_scnptr;       /* file ptr to raw data for section */
-       long            s_relptr;       /* file ptr to relocation */
-       long            s_lnnoptr;      /* file ptr to line numbers */
-       unsigned short  s_nreloc;       /* number of relocation entries */
-       unsigned short  s_nlnno;        /* number of line number entries */
-       long            s_flags;        /* flags */
-       
-#ifdef TC_I960
-       unsigned long   s_align;        /* section alignment */
-#endif /* TC_I960 */
-};
-
-#define        SCNHDR  struct scnhdr
-#define        SCNHSZ  sizeof(SCNHDR)
-
-/*
- * names of "special" sections
- */
-#define _TEXT    ".text"               /* executable code section      */
-#define _DATA    ".data"               /* initialized data             */
-#define _BSS     ".bss"                        /* un-initialized data          */
-#define _DEBUG   ".debug"              /* special section used by dbx  */
-#define _COMMENT ".comment"            /* version info                 */
-#define _LIB     ".lib"                        /* shared lib info section      */
-#define _TV      ".tv"
-
-/*
- * s_flags "type"
- */
-
-/*
- * In instances where it is necessary for a linker to
- * produce an output file which contains text or data not
- * based at virtual address 0, e.g. for a ROM, then the
- * linker should accept address base information as command
- * input and use PAD sections to skip over unused addresses.
- * (at least for a29k.  Maybe others.)
- */
-
-#define STYP_REG        (0x0000) /* "regular" section: allocated, relocated, loaded */
-#define STYP_DSECT      (0x0001) /* "dummy" section: not allocated, relocated, not loaded */
-#define STYP_NOLOAD     (0x0002) /* "noload" section: allocated, relocated, not loaded */
-#define STYP_GROUP      (0x0004) /* "grouped" section: formed of input sections */
-#define STYP_PAD        (0x0008) /* "padding" section: not allocated, not relocated, loaded */
-#define STYP_COPY       (0x0010) /* "copy" section: for decision function used by field update;  not allocated, not relocated,
-                                    loaded; reloc & lineno entries processed normally */
-#define STYP_TEXT       (0x0020) /* section contains text only */
-#define S_SHRSEG        (0x0020) /* In 3b Update files (output of ogen), sections which appear in SHARED segments of the Pfile
-                                    will have the S_SHRSEG flag set by ogen, to inform dufr that updating 1 copy of the proc. will
-                                    update all process invocations. */
-#define STYP_DATA       (0x0040) /* section contains data only */
-#define STYP_BSS        (0x0080) /* section contains bss only */
-#define S_NEWFCN        (0x0100) /* In a minimal file or an update file, a new function (as compared with a replaced function) */
-#define STYP_INFO       (0x0200) /* comment section : not allocated not relocated, not loaded */
-#define STYP_OVER       (0x0400) /* overlay section : relocated not allocated or loaded */
-#define STYP_LIB        (0x0800) /* for .lib section : same as INFO */
-#define STYP_MERGE      (0x2000) /* merge section -- combines with text, data or bss sections only */
-#define STYP_REVERSE_PAD (0x4000) /* section will be padded with no-op instructions wherever padding is necessary and there is a
-                                    word of contiguous bytes beginning on a word boundary. */
-
-#ifdef TC_A29K
-/* NOTE:  The use of STYP_BSSREG for relocation is not yet defined. */
-#define        STYP_BSSREG     0x1200  /* Global register area (like STYP_INFO) */
-#define STYP_ENVIR     0x2200  /* Environment (like STYP_INFO) */
-#define STYP_ABS       0x4000  /* Absolute (allocated, not reloc, loaded) */
-#define STYP_LIT       0x8020  /* Literal data (like STYP_TEXT) */
-#endif /* TC_A29K */
-
-/********************** LINE NUMBERS **********************/
-
-/* 1 line number entry for every "breakpointable" source line in a section.
- * Line numbers are grouped on a per function basis; first entry in a function
- * grouping will have l_lnno = 0 and in place of physical address will be the
- * symbol table index of the function name.
- */
-struct lineno {
-       union {
-               long l_symndx;  /* symbol index of function name, iff l_lnno == 0*/
-               long l_paddr;   /* (physical) address of line number */
-       } l_addr;
-       unsigned short  l_lnno; /* line number */
-#ifdef TC_I960
-       /* not used on a29k */
-       char padding[2];        /* force alignment */
-#endif /* TC_I960 */
-};
-
-#define        LINENO  struct lineno
-#define        LINESZ  sizeof(LINENO) 
-
-
-/********************** SYMBOLS **********************/
-
-#define SYMNMLEN       8       /* # characters in a symbol name */
-#define FILNMLEN       14      /* # characters in a file name */
-#define DIMNUM         4       /* # array dimensions in auxiliary entry */
-
-struct syment {
-       union {
-               char    _n_name[SYMNMLEN];      /* old COFF version */
-               struct {
-                       long    _n_zeroes;      /* new == 0 */
-                       long    _n_offset;      /* offset into string table */
-               } _n_n;
-               char    *_n_nptr[2];    /* allows for overlaying */
-       } _n;
-       long            n_value;        /* value of symbol */
-       short           n_scnum;        /* section number */
-       
-#ifdef TC_I960
-       /* This isn't yet used on the i960.  In some formats this
-          is two bytes of padding.  In others, it is missing entirely. */
-       unsigned short  n_flags;        /* copy of flags from filhdr */
-#endif /* TC_I960 */
-       
-#ifdef TC_A29K
-       unsigned short  n_type;         /* type and derived type */
-#else /* TC_A29K */
-       /* at least i960 uses long */
-       unsigned long   n_type;         /* type and derived type */
-#endif /* TC_A29K */
-       
-       char            n_sclass;       /* storage class */
-       char            n_numaux;       /* number of aux. entries */
-       
-#ifndef TC_A29K
-       char            pad2[2];        /* force alignment */
-#endif /* TC_A29K */
-};
-
-#define        SYMENT  struct syment
-#define        SYMESZ  sizeof(SYMENT) /* This had better also be sizeof(AUXENT) */
-
-#define n_name         _n._n_name
-#define n_ptr          _n._n_nptr[1]
-#define n_zeroes       _n._n_n._n_zeroes
-#define n_offset       _n._n_n._n_offset
-    
-    /*
-     * Relocatable symbols have number of the section in which they are defined,
-     * or one of the following:
-     */
-    
-#define N_SCNUM        ((short) 1-65535) /* section num where symbol defined */
-#define N_UNDEF        ((short)0)  /* undefined symbol */
-#define N_ABS  ((short)-1) /* value of symbol is absolute */
-#define N_DEBUG        ((short)-2) /* debugging symbol -- symbol value is meaningless */
-#define N_TV   ((short)-3) /* indicates symbol needs preload transfer vector */
-#define P_TV   ((short)-4) /* indicates symbol needs transfer vector (postload) */
-
-/*
- * Type of a symbol, in low 4 bits of the word
- */
-#define T_NULL         0 /* type not assigned */
-#define T_VOID         1 /* function argument (only used by compiler) (but now real void). */
-#define T_CHAR         2 /* character */
-#define T_SHORT                3 /* short integer */
-#define T_INT          4 /* integer */
-#define T_LONG         5 /* long integer */
-#define T_FLOAT                6 /* floating point */
-#define T_DOUBLE       7 /* double word */
-#define T_STRUCT       8 /* structure */
-#define T_UNION                9 /* union */
-#define T_ENUM         10 /* enumeration */
-#define T_MOE          11 /* member of enumeration */
-#define T_UCHAR                12 /* unsigned character */
-#define T_USHORT       13 /* unsigned short */
-#define T_UINT         14 /* unsigned integer */
-#define T_ULONG                15 /* unsigned long */
-
-#ifdef TC_I960
-#define T_LNGDBL       16      /* long double */
-#endif /* TC_I960 */
-
-/*
- * derived types, in n_type
- */
-#define DT_NON         (0)     /* no derived type */
-#define DT_PTR         (1)     /* pointer */
-#define DT_FCN         (2)     /* function */
-#define DT_ARY         (3)     /* array */
-
-#ifndef TC_I960
-
-#define N_BTMASK       (0x0f)
-#define N_TMASK                (0x30)
-#define N_BTSHFT       (4)
-#define N_TSHIFT       (2)
-
-#else /* TC_I960 */
-
-#define N_BTMASK       (0x1f)
-#define N_TMASK                (0x60)
-#define N_BTSHFT       (5)
-#define N_TSHIFT       (2)
-
-#endif /* TC_I960 */
-
-#define BTYPE(x)       ((x) & N_BTMASK)
-
-#define ISPTR(x)       (((x) & N_TMASK) == (DT_PTR << N_BTSHFT))
-#define ISFCN(x)       (((x) & N_TMASK) == (DT_FCN << N_BTSHFT))
-#define ISARY(x)       (((x) & N_TMASK) == (DT_ARY << N_BTSHFT))
-
-#define DECREF(x) ((((x)>>N_TSHIFT)&~N_BTMASK)|((x)&N_BTMASK))
-
-union auxent {
-       struct {
-               long x_tagndx;  /* str, un, or enum tag indx */
-               union {
-                       struct {
-                               unsigned short x_lnno; /* declaration line number */
-                               unsigned short x_size; /* str/union/array size */
-                       } x_lnsz;
-                       long x_fsize;   /* size of function */
-               } x_misc;
-               union {
-                       struct {                /* if ISFCN, tag, or .bb */
-                               long x_lnnoptr; /* ptr to fcn line # */
-                               long x_endndx;  /* entry ndx past block end */
-                       } x_fcn;
-                       struct {                /* if ISARY, up to 4 dimen. */
-                               unsigned short x_dimen[DIMNUM];
-                       } x_ary;
-               } x_fcnary;
-               unsigned short x_tvndx;         /* tv index */
-       } x_sym;
-       
-       /* This was just a struct x_file with x_fname only in a29k.  xoxorich. */
-       union {
-               char x_fname[FILNMLEN];
-               struct {
-                       long x_zeroes;
-                       long x_offset;
-               } x_n;
-       } x_file;
-       
-       struct {
-               long x_scnlen;                  /* section length */
-               unsigned short x_nreloc;        /* # relocation entries */
-               unsigned short x_nlinno;        /* # line numbers */
-       } x_scn;
-       
-       struct {
-               long            x_tvfill;       /* tv fill value */
-               unsigned short  x_tvlen;        /* length of .tv */
-               
-               /* This field was typo'd x_tvrna on a29k. xoxorich. */
-               unsigned short  x_tvran[2];     /* tv range */
-       } x_tv;         /* info about .tv section (in auxent of symbol .tv)) */
-       
-#ifdef TC_I960
-       /******************************************
-        *  I960-specific *2nd* aux. entry formats
-        ******************************************/
-       struct {
-               /* This is a very old typo that keeps getting propogated. */
-#define x_stdindx x_stindx
-               long x_stindx;  /* sys. table entry */
-       } x_sc; /* system call entry */
-       
-       struct {
-               unsigned long x_balntry; /* BAL entry point */
-       } x_bal; /* BAL-callable function */
-       
-       struct {
-               unsigned long   x_timestamp;            /* time stamp */
-               char    x_idstring[20];         /* producer identity string */
-       } x_ident;                              /* Producer ident info */
-       
-       char a[sizeof(struct syment)];  /* force auxent/syment sizes to match */
-#endif /* TC_I960 */
-};
-
-#define        AUXENT  union auxent
-#define        AUXESZ  sizeof(AUXENT) /* This had better also be sizeof(SYMENT) */
-
-#if VAX || I960
-#      define _ETEXT   "_etext"
-#else
-#      define _ETEXT   "etext"
-#endif
-
-/********************** RELOCATION DIRECTIVES **********************/
-
-struct reloc {
-       long r_vaddr;           /* Virtual address of reference */
-       long r_symndx;          /* Index into symbol table */
-       unsigned short r_type;  /* Relocation type */
-#ifdef TC_I960
-       /* not used for a29k */
-       char pad[2];            /* Unused */
-#endif /* TC_I960 */
-};
-
-#define RELOC struct reloc
-#define RELSZ sizeof(RELOC)
-
-#define        R_ABS           (0x00) /* reference is absolute */
-
-#ifdef TC_I960
-#define R_RELLONG      (0x11)  /* Direct 32-bit relocation */
-#define R_IPRSHORT     (0x18)
-#define R_IPRMED       (0x19)  /* 24-bit ip-relative relocation */
-#define R_IPRLONG      (0x1a)
-#define R_OPTCALL      (0x1b)  /* 32-bit optimizable call (leafproc/sysproc) */
-#define R_OPTCALLX     (0x1c)  /* 64-bit optimizable call (leafproc/sysproc) */
-#define R_GETSEG       (0x1d)
-#define R_GETPA                (0x1e)
-#define R_TAGWORD      (0x1f)
-#endif /* TC_I960 */
-
-#ifdef TC_A29K
-/*
- * NOTE: All the "I" forms refer to Am29000 instruction
- * formats.  The linker is expected to know how the numeric
- * information is split and/or aligned within the
- * instruction word(s).  R_BYTE works for instructions, too.
- *
- * If the parameter to a CONSTH instruction is a relocatable
- * type, two relocation records are written.  The first has
- * an r_type of R_IHIHALF (33 octal) and a normal r_vaddr
- * and r_symndx.  The second relocation record has an r_type
- * of R_IHCONST (34 octal), a normal r_vaddr (which is
- * redundant), and an r_symndx containing the 32-bit
- * constant offset to the relocation instead of the actual
- * symbol table index.  This second record is always
- * written, even if the constant offset is zero.  The
- * constant fields of the instruction are set to zero.
- */
-
-#define        R_IREL          (0x18) /* instruction relative (jmp/call) */
-#define        R_IABS          (0x19) /* instruction absolute (jmp/call) */
-#define        R_ILOHALF       (0x1a) /* instruction low half  (const)  */
-#define        R_IHIHALF       (0x1b) /* instruction high half (consth) part 1 */
-#define        R_IHCONST       (0x1c) /* instruction high half (consth) part 2
-                                 constant offset of R_IHIHALF relocation */
-#define        R_BYTE          (0x1d) /* relocatable byte value */
-#define R_HWORD                (0x1e) /* relocatable halfword value */
-#define R_WORD         (0x1f) /* relocatable word value */
-#define        R_IGLBLRC       (0x20) /* instruction global register RC */
-#define        R_IGLBLRA       (0x21) /* instruction global register RA */
-#define        R_IGLBLRB       (0x22) /* instruction global register RB */
-#endif /* TC_A29K */
-
-
-#define DEFAULT_DATA_SECTION_ALIGNMENT 4
-#define DEFAULT_BSS_SECTION_ALIGNMENT 4
-#define DEFAULT_TEXT_SECTION_ALIGNMENT 16
-/* For new sections we haven't heard of before */
-#define DEFAULT_SECTION_ALIGNMENT 4
-
-#if defined(TC_I386)
-/*
- * X86 generic
- *     8-bit offset reference in 8-bits
- *     8-bit offset reference in 16-bits 
- *     12-bit segment reference
- *     auxiliary relocation entry
- */
-#define        R_OFF8          07
-#define R_OFF16                010
-#define        R_SEG12         011
-#define        R_AUX           013
-
-/*
- * B16 and X86 generics
- *     16-bit direct reference
- *     16-bit "relative" reference
- *     16-bit "indirect" (TV) reference
- */
-#define  R_DIR16       01
-#define  R_REL16       02
-#define  R_IND16       03
-
-/*
- * 3B generic
- *     24-bit direct reference
- *     24-bit "relative" reference
- *     16-bit optimized "indirect" TV reference
- *     24-bit "indirect" TV reference
- *     32-bit "indirect" TV reference
- */
-#define  R_DIR24       04
-#define  R_REL24       05
-#define  R_OPT16       014
-#define  R_IND24       015
-#define  R_IND32       016
-
-/* 
- * XL generics
- *     10-bit direct reference
- *     10-bit "relative" reference
- *     32-bit "relative" reference
- */
-#define        R_DIR10         025
-#define R_REL10                026
-#define R_REL32                027
-
-/*
- * 3B and M32 generics
- *     32-bit direct reference
- */
-#define  R_DIR32       06
-
-/*
- * M32 generic
- *     32-bit direct reference with bytes swapped
- */
-#define  R_DIR32S      012
-#endif /* TC_I386 */
-
-#if defined(TE_I386AIX)
-
-#define UINFOSIZ        64      /* size of user info buffer */
-typedef char uinfo_t[UINFOSIZ];
-
-struct env387 {
-  unsigned short control;
-  unsigned short r0;
-  unsigned short status;
-  unsigned short r1;
-  unsigned short tag;
-  unsigned short r2;
-  unsigned long eip;
-  unsigned short code_seg;
-  unsigned short opcode;
-  unsigned long operand;
-  unsigned short operand_seg;
-  unsigned short r3;
-  unsigned char regs[8][10];
-};
-
-#define        CD_NAMELEN 16   /* length of most names in this header */
-#define        CORHDRSIZ       2048 /* size to which header is padded out */
-#define        MAX_CORE_SEGS   32 /* maximum segments in a core dump */
-#define NUM_FREGS      1 /* # of saved FP regs */
-
-/*
- * These are defined such that 286 and 386 kernels can produce
- * compatible dumps.
- */
-#define CD_AX  0
-#define CD_BX  1
-#define CD_CX  2
-#define CD_DX  3
-#define CD_SI  4
-#define CD_DI  5
-#define CD_BP  6
-#define CD_SP  7
-#define CD_FL  8
-#define CD_IP  9
-#define CD_CS  10
-#define CD_DS  11
-#define CD_ES  12
-#define CD_FS  13
-#define CD_GS  14
-#define CD_SS  15
-#define NUM_REGS       16
-
-#ifndef SPATHLEN
-# define SPATHLEN 16 /* sys/param.h */
-#endif
-#ifndef NSIG
-# define NSIG 63 /* sys/signal.h */
-# define SIGSETSZ ((NSIG+31)/32)
-typedef struct ksigmask {
-       unsigned long sigs[SIGSETSZ];
-} ksigmask_t;
-#endif
-
-struct corehdr {
-       char cd_magic[4];               /* COR_MAGIC = "core" */
-       
-       /* general information about the dump itself */
-       struct dumpseg { /* table of contents for dump */
-               long cs_type; /* seg. type; see below */
-               long cs_len; /* length (in bytes) of segment */
-               long cs_offset; /* offset (in dump) of segment */
-               long cs_address; /* address segment had in mem */
-       } cd_segs[MAX_CORE_SEGS];
-       
-       /* general information about the process */
-       char cd_comm[CD_NAMELEN]; /* command being run */
-       char cd_mach[CD_NAMELEN]; /* type of machine it ran on */
-       char cd_site[CD_NAMELEN]; /* name of site it ran on */
-       long cd_ldtype; /* type of load module running */
-       char cd_intsize; /* sizeof(int) */
-       char cd_dptrsize; /* sizeof(char *) */
-       char cd_tptrsize; /* sizeof(int (*)()) */
-       char cd_unused;
-       
-       /* user-mode program state */
-       long cd_regs[NUM_REGS]; /* user-mode general registers  */
-       struct env387 cd_fpregs; /* user-mode floating-point state */
-       
-       /* kernel-mode program state */
-       int (*cd_sig[NSIG])(); /* disposition of signals */
-       ksigmask_t cd_sigmask; /* signals to be blocked */
-       ksigmask_t cd_sigpend; /* signals currently pending */
-       long cd_cursig; /* signal that caused the dump */
-       
-       long cd_pid; /* process ID of the corpse */
-       long cd_ppid; /* parent process ID of corpse */
-       short cd_uid; /* process effective user ID */
-       short cd_ruid; /* process real user ID */
-       short cd_gid; /* process effective group ID */
-       short cd_rgid; /* process real group ID */
-       
-       uinfo_t cd_uinfo; /* buffer of user information */
-       char cd_locname[32]; /* name of /local */
-       char cd_uvers[CD_NAMELEN]; /* user version string */
-       unsigned short cd_spath[SPATHLEN]; /* sitepath */
-};
-
-#ifndef NOCHECKS
-/* this will generate an error if sizeof(struct corehdr) > CORHDRSIZ */
-struct { char xxcdxx[CORHDRSIZ+1-sizeof(struct corehdr)]; };
-#endif /* ! NOCHECKS */
-
-/*
- * segment types (in cs_type)
- *     each segment in the address space appears here, whether or not it
- *     is actually dumped.  Read/only segments will not actually be dumped.
- *     A segment that is not in the dump will have a cs_offset of zero.
- */
-#define        COR_TYPE_CODE           'x'     /* process code - NOT IN DUMP   */
-#define        COR_TYPE_DATA           'd'     /* process data segment         */
-#define        COR_TYPE_STACK          's'     /* process stack segment        */
-#define COR_TYPE_LIBCODE       'X'     /* shared lib code - NOT IN DUMP*/
-#define COR_TYPE_LIBDATA       'D'     /* shared lib data              */
-#define COR_TYPE_READ          'r'     /* other read/only - NOT IN DUMP*/
-#define COR_TYPE_WRITE         'w'     /* other writeable              */
-#define        COR_TYPE_MSC            '?'     /* other, mapped in segment     */
-
-#endif /* TE_I386AIX */
-
-/*
- * Local Variables:
- * comment-column: 0
- * End:
- */
-
-/* end of coff.gnu.h */
diff --git a/gas/config/ho-a29k.h b/gas/config/ho-a29k.h
deleted file mode 100755 (executable)
index 683c4f7..0000000
+++ /dev/null
@@ -1,26 +0,0 @@
-/* ho-a29k.h  Host-specific header file intended for "eb" board with
-   HIF.
-   
-   Copyright (C) 1987, 1991, 1992 Free Software Foundation, Inc.
-   
-   This file is part of GAS, the GNU Assembler.
-   
-   GAS is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
-   any later version.
-   
-   GAS is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-   
-   You should have received a copy of the GNU General Public License
-   along with GAS; see the file COPYING.  If not, write to
-   the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-#define HO_A29K 1
-
-#include <stdlib.h>
-
-/* end of ho-a29k.h */
diff --git a/gas/config/ho-cygnus.h b/gas/config/ho-cygnus.h
deleted file mode 100755 (executable)
index ad408d2..0000000
+++ /dev/null
@@ -1,31 +0,0 @@
-/* ho-ansi.h  Host-specific header file for generic ansi environments.
-   Copyright (C) 1987, 1991, 1992 Free Software Foundation, Inc.
-   
-   This file is part of GAS, the GNU Assembler.
-   
-   GAS is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
-   any later version.
-   
-   GAS is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-   
-   You should have received a copy of the GNU General Public License
-   along with GAS; see the file COPYING.  If not, write to
-   the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-#define M_ANSI 1
-
-#include <stdlib.h>
-#include <string.h>
-#include <stdio.h>
-#include <ctype.h>
-
-#define sys_nerr       _sys_nerr
-#define sys_errlist    _sys_errlist
-#define bzero(s,l)     (memset((s),0,(l)))
-
-/* end of ho-cygnus.h */
diff --git a/gas/config/mh-a29k b/gas/config/mh-a29k
deleted file mode 100755 (executable)
index f8de0b9..0000000
+++ /dev/null
@@ -1 +0,0 @@
-CC = gcc -ba29k
diff --git a/gas/config/mh-cygnus b/gas/config/mh-cygnus
deleted file mode 100755 (executable)
index 774d205..0000000
+++ /dev/null
@@ -1,8 +0,0 @@
-CC = gcc -b$(target) -Wall -nostdinc -nostdlib \
-       -I$(srcdir)/../clib/ansi/include -I$(srcdir)/../os-layer/include
-
-CLIB = $(srcdir)/../clib/Host-$(host)/Target-$(target)/libc.a \
-       $(srcdir)/../gcc/Host-sun4/Target-$(target)/gnulib
-
-LDFLAGS = /lib/crt0.o
-
diff --git a/gas/config/obj-coff-bfd.c b/gas/config/obj-coff-bfd.c
deleted file mode 100755 (executable)
index b2cb035..0000000
+++ /dev/null
@@ -1,2114 +0,0 @@
-/* coff object file format with bfd
-   Copyright (C) 1989, 1990, 1991 Free Software Foundation, Inc.
-
-This file is part of GAS.
-
-GAS is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2, or (at your option)
-any later version.
-
-GAS is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with GAS; see the file COPYING.  If not, write to
-the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-/*
-
- How does this releate to the rest of GAS ?
-
- Well, all the other files in gas are more or less a black box. It
- takes care of opening files, parsing command lines, stripping blanks
- etc etc. This module gets a chance to register what it wants to do by
- saying that it is interested in various pseduo ops. The other big
- change is write_object_file. This runs through all the data
- structures that gas builds, and outputs the file in the format of our
- choice.
- Hacked for BFDness by steve chamberlain
-
- This object module now supports the Hitachi H8/300 and the AMD 29k
-
- sac@cygnus.com
-*/
-
-#include "as.h"
-#include "obstack.h"
-#include "subsegs.h"
-#include "frags.h"
-#include "../bfd/libbfd.h"
-
-
-/* This vector is used to turn an internal segment into a section #
-   suitable for insertion into a coff symbol table 
- */
-
-const short seg_N_TYPE[] = { /* in: segT   out: N_TYPE bits */
-       C_ABS_SECTION,
-       1,
-       2,
-       3,
-       4,
-       5,
-       6,
-       7,
-       8,
-       9,
-       10,
-       C_UNDEF_SECTION,                /* SEG_UNKNOWN */
-       C_UNDEF_SECTION,                /* SEG_ABSENT */
-       C_UNDEF_SECTION,                /* SEG_PASS1 */
-       C_UNDEF_SECTION,                /* SEG_GOOF */
-       C_UNDEF_SECTION,                /* SEG_BIG */
-       C_UNDEF_SECTION,                /* SEG_DIFFERENCE */
-       C_DEBUG_SECTION,                /* SEG_DEBUG */
-       C_NTV_SECTION,          /* SEG_NTV */
-       C_PTV_SECTION,          /* SEG_PTV */
-       C_REGISTER_SECTION,     /* SEG_REGISTER */
-};
-
-
-int function_lineoff = -1;     /* Offset in line#s where the last function
-                                  started (the odd entry for line #0) */
-
-int our_lineno_number = 0;     /* we use this to build pointers from .bf's
-                                  into the linetable.  It should match
-                                  exactly the values that are later
-                                  assigned in text_lineno_number by
-                                  write.c. */
-
-int text_lineno_number = 0;
-
-/* Add 4 to the real value to get the index and compensate the
-   negatives. This vector is used by S_GET_SEGMENT to turn a coff
-   section number into a segment number 
-*/
-static symbolS *previous_file_symbol = NULL;
-void c_symbol_merge();
-
-symbolS *c_section_symbol();
-bfd *abfd;
-void EXFUN(bfd_as_write_hook,(struct internal_filehdr *,
-                             bfd *abfd));
-
-static void EXFUN(fixup_segment,(fixS *        fixP,
-                 segT  this_segment_type));
-
-static void EXFUN(fill_section,(bfd *abfd ,
-                               struct internal_filehdr *f, unsigned
-                               long *));
-
-
-char *EXFUN(s_get_name,(symbolS *s));
-static symbolS *EXFUN(tag_find_or_make,(char *name));
-static symbolS* EXFUN(tag_find,(char *name));
-
-
-static int
-EXFUN(c_line_new,(
-      symbolS *symbol,
-      long paddr,
-      unsigned short line_number,
-                 fragS* frag));
-
-
-static void EXFUN(w_symbols,
-                 (bfd *abfd ,
-                  char *where ,
-                  symbolS *symbol_rootP));
-
-
-
-static void EXFUN( obj_coff_def,(int what));
-static void EXFUN( obj_coff_lcomm,(void));
-static void EXFUN( obj_coff_dim,(void));
-static void EXFUN( obj_coff_text,(void));
-static void EXFUN( obj_coff_data,(void));
-static void EXFUN( obj_coff_endef,(void));
-static void EXFUN( obj_coff_line,(void));
-static void EXFUN( obj_coff_ln,(void));
-static void EXFUN( obj_coff_scl,(void));
-static void EXFUN( obj_coff_size,(void));
-static void EXFUN( obj_coff_tag,(void));
-static void EXFUN( obj_coff_type,(void));
-static void EXFUN( obj_coff_val,(void));
-static void EXFUN( obj_coff_section,(void));
-static void EXFUN( tag_init,(void));
-static void EXFUN( tag_insert,(char *name, symbolS *symbolP));
-
-
-static struct hash_control *tag_hash;
-static symbolS *def_symbol_in_progress = NULL;
-
-const pseudo_typeS obj_pseudo_table[] = {
-       { "def",        obj_coff_def,           0       },
-       { "dim",        obj_coff_dim,           0       },
-       { "endef",      obj_coff_endef,         0       },
-       { "line",       obj_coff_line,          0       },
-       { "ln",         obj_coff_ln,            0       },
-       { "scl",        obj_coff_scl,           0       },
-       { "size",       obj_coff_size,          0       },
-       { "tag",        obj_coff_tag,           0       },
-       { "type",       obj_coff_type,          0       },
-       { "val",        obj_coff_val,           0       },
-        { "section",    obj_coff_section,       0       },
-        { "text",       obj_coff_text,          0       },
-        { "data",       obj_coff_data,          0       },
-       /* we don't yet handle this. */
-       { "ident",      s_ignore,               0       },
-       { "ABORT",      s_abort,                0 },
-       { "lcomm",      obj_coff_lcomm, 0},
-       { NULL} /* end sentinel */
-}; /* obj_pseudo_table */
-
-
-
-/* Section stuff 
-
-   We allow more than just the standard 3 sections, infact, we allow
-   10 sections, (though the usual three have to be there).
-
-   This structure performs the mappings for us:
-
-*/
-
-/* OBS stuff 
-static struct internal_scnhdr bss_section_header;
-struct internal_scnhdr data_section_header;
-struct internal_scnhdr text_section_header;
-
-const segT N_TYPE_seg [32] =
-{
-
-};
-
-*/
-
-#define N_SEG 32
-typedef struct 
-{
-  segT seg_t;  
-int i;  
-} seg_info_type;
-
-seg_info_type seg_info_off_by_4[N_SEG] = 
-{
-{SEG_PTV,  },
-{SEG_NTV,  },
-{SEG_DEBUG, },
-{SEG_ABSOLUTE,  },
-{SEG_UNKNOWN,   },
-{SEG_E0}, 
-{SEG_E1},
-{SEG_E2},
-{SEG_E3},
-{SEG_E4},
-{SEG_E5},
-{SEG_E6},
-{SEG_E7},
-{SEG_E8}, 
-{SEG_E9},
-{15},
-{16},
-{17},
-{18},
-{19},
-{20},
-{0},
-{0},
-{0},
-{SEG_REGISTER},0,0,0,0};
-
-#define SEG_INFO_FROM_SECTION_NUMBER(x) (seg_info_off_by_4[(x)+4])
-#define SEG_INFO_FROM_SEG_NUMBER(x) (seg_info_off_by_4[(x)])
-
-
-static relax_addressT 
-DEFUN(relax_align,(address, alignment),
-register relax_addressT address AND
-register long alignment )
-{
-  relax_addressT       mask;
-  relax_addressT       new_address;
-
-  mask = ~ ( (~0) << alignment );
-  new_address = (address + mask) & (~ mask);
-  return (new_address - address);
-} /* relax_align() */
-
-
-segT 
-DEFUN(s_get_segment,(x) ,
-symbolS* x)
-{
-  return SEG_INFO_FROM_SECTION_NUMBER(x->sy_symbol.ost_entry.n_scnum).seg_t;
-}
-
-
-
-/* calculate the size of the frag chain and fill in the section header
-   to contain all of it, also fill in the addr of the sections */
-static unsigned int  DEFUN(size_section,(abfd, idx),
-                 bfd *abfd AND
-                 unsigned int idx)
-{
-
-  unsigned int size = 0;
-  fragS *frag = segment_info[idx].frchainP->frch_root;
-  while (frag) {
-      if (frag->fr_address != size) {  
-         printf("Out of step\n");
-         size = frag->fr_address;
-       }
-      size += frag->fr_fix;
-      switch (frag->fr_type) {
-       case rs_fill:
-       case rs_org:
-         size  +=    frag->fr_offset * frag->fr_var;
-         break;
-       case rs_align:
-         size  +=   relax_align(size, frag->fr_offset);
-       }
-      frag = frag->fr_next;
-    }
-  segment_info[idx].scnhdr.s_size = size;
-  return size;
-}
-
-
-static unsigned int DEFUN(count_entries_in_chain,(idx),
-                         unsigned int idx)
-{
-    unsigned int nrelocs;
-    fixS *fixup_ptr;
-
-    /* Count the relocations */
-    fixup_ptr = segment_info[idx].fix_root;
-    nrelocs = 0;
-    while (fixup_ptr != (fixS *)NULL) 
-    {
-       if (TC_COUNT_RELOC(fixup_ptr)) 
-       {
-           
-#ifdef TC_A29K
-
-           if (fixup_ptr->fx_r_type == RELOC_CONSTH)  
-            nrelocs+=2;
-           else                                        
-            nrelocs++;         
-#else
-           nrelocs++;
-#endif
-       }
-       
-       fixup_ptr = fixup_ptr->fx_next;
-    }
-    return nrelocs;
-}
-
-/* output all the relocations for a section */
-void DEFUN(do_relocs_for,(abfd, file_cursor),
-          bfd *abfd AND
-          unsigned long *file_cursor)
-{
-    unsigned int nrelocs;
-
-
-
-    unsigned int idx;
-  
-
-
-
-    for (idx = SEG_E0; idx < SEG_E9; idx++) 
-    {
-       if (segment_info[idx].scnhdr.s_name[0]) 
-       {
-
-           struct external_reloc *ext_ptr;
-           struct external_reloc *external_reloc_vec;
-           unsigned int external_reloc_size;
-           unsigned int count = 0;
-           unsigned int base  = segment_info[idx].scnhdr.s_paddr;
-           fixS *   fix_ptr = segment_info[idx].fix_root;
-           nrelocs = count_entries_in_chain(idx);
-           external_reloc_size = nrelocs * RELSZ;
-           external_reloc_vec =
-            (struct external_reloc*)malloc(external_reloc_size);
-
-       
-           
-           ext_ptr = external_reloc_vec;
-           
-           /* Fill in the internal coff style reloc struct from the
-              internal fix list */
-           while (fix_ptr)
-           {
-               symbolS *symbol_ptr;
-               struct internal_reloc intr;
-
-               /* Only output some of the relocations */
-               if (TC_COUNT_RELOC(fix_ptr))
-               {
-                   symbolS *dot;
-                   symbol_ptr = fix_ptr->fx_addsy;
-                   
-                   intr.r_type = TC_COFF_FIX2RTYPE(fix_ptr);
-                   intr.r_vaddr = base +  fix_ptr->fx_frag->fr_address +  fix_ptr->fx_where ;
-
-
-                   /* Turn the segment of the symbol into an offset
-                    */
-                   dot =
-                    segment_info[S_GET_SEGMENT(symbol_ptr)].dot;
-   
-                   if (dot)
-                   {
-                       intr.r_symndx = dot->sy_number;
-                   }
-                   else 
-                   {
-                       intr.r_symndx = symbol_ptr->sy_number;
-                   }
-
-               
-                   (void)bfd_coff_swap_reloc_out(abfd, &intr, ext_ptr);
-                   ext_ptr++;
-
-#if defined(TC_A29K)
-                   /* The 29k has a special kludge for the high 16 bit reloc.
-                      Two relocations are emmited, R_IHIHALF, and
-                      R_IHCONST. The second one doesn't contain a symbol,
-                      but uses the value for offset */
-               
-                   if (intr.r_type == R_IHIHALF)
-                   {
-                       /* now emit the second bit */
-                       intr.r_type = R_IHCONST;        
-                       intr.r_symndx = fix_ptr->fx_addnumber;
-                       (void)bfd_coff_swap_reloc_out(abfd,&intr,ext_ptr);
-                       ext_ptr++;
-                   }
-#endif
-               }
-               
-               fix_ptr = fix_ptr->fx_next;
-           }
-      
-           /* Write out the reloc table */
-           segment_info[idx].scnhdr.s_relptr = *file_cursor;
-           segment_info[idx].scnhdr.s_nreloc = nrelocs;
-           bfd_write((PTR)external_reloc_vec, 1, external_reloc_size, abfd);
-           *file_cursor += external_reloc_size;
-           free( external_reloc_vec);
-       }
-    }
-}
-
-
-/* run through a frag chain and write out the data to go with it, fill
-   in the scnhdrs with the info on the file postions 
-*/
-static void DEFUN(fill_section,(abfd, filehdr, file_cursor),
-                 bfd *abfd AND
-                 struct internal_filehdr *filehdr AND
-                 unsigned long *file_cursor)
-{
-
-    unsigned int i;
-    unsigned int paddr = 0;
-  
-    for (i = SEG_E0; i < SEG_UNKNOWN; i++) 
-    {  
-       unsigned int offset = 0;
-
-       struct internal_scnhdr *s = &( segment_info[i].scnhdr);
-         
-       if (s->s_name[0]) 
-       {
-           fragS *frag = segment_info[i].frchainP->frch_root;
-           char *buffer =  malloc(s->s_size);
-           s->s_scnptr = *file_cursor;
-           s->s_paddr =  paddr;
-           s->s_vaddr =  paddr;
-
-           s->s_flags = STYP_REG;
-           if (strcmp(s->s_name,".text")==0)
-            s->s_flags |= STYP_TEXT;
-           else if (strcmp(s->s_name,".data")==0)
-            s->s_flags |= STYP_DATA;
-           else if (strcmp(s->s_name,".bss")==0)
-            s->s_flags |= STYP_BSS | STYP_NOLOAD;
-
-           while (frag) {
-                   unsigned int fill_size;
-                   switch (frag->fr_type) {
-
-                         case rs_fill:
-                         case rs_align:
-                         case rs_org:
-                           if(frag->fr_fix) 
-                           {
-                               memcpy(buffer + frag->fr_address,
-                                      frag->fr_literal,
-                                      frag->fr_fix);
-                               offset += frag->fr_fix;
-                           }
-
-                           fill_size = frag->fr_var;
-                           if (fill_size)      
-                           {
-                               unsigned int count ;
-                               unsigned int off = frag->fr_fix;
-                               for (count = frag->fr_offset; count;  count--) 
-                               {
-                                   memcpy(buffer +  frag->fr_address  + off,
-                                          frag->fr_literal + frag->fr_fix,
-                                          fill_size);
-                                   off += fill_size;
-                                   offset += fill_size;
-                     
-                               }
-
-                           }
-                           break;
-                         default:      
-                           abort();
-                       }
-                   frag = frag->fr_next;
-               }
-         
-
-           bfd_write(buffer, s->s_size,1,abfd);
-           free(buffer);
-         
-           *file_cursor += s->s_size;
-           paddr += s->s_size;
-       }      
-    }
-
-}
-
-
-
-/* Coff file generation & utilities */
-
-
-static void 
-DEFUN(coff_header_append,(abfd, filehdr, aouthdr),
-      bfd *abfd AND
-      struct internal_filehdr *filehdr AND
-      struct internal_aouthdr *aouthdr)
-{
-  unsigned int i;
-  char buffer[1000];
-  char buffero[1000];
-
-  bfd_seek(abfd, 0, 0);
-#if 0  
-  filehdr.f_opthdr = bfd_coff_swap_aouthdr_out(abfd, aouthdr,
-                                              buffero);
-#else
-  filehdr->f_opthdr = 0;
-#endif
-  i = bfd_coff_swap_filehdr_out(abfd, filehdr, buffer);
-
-  bfd_write(buffer, i ,1, abfd);
-  bfd_write(buffero, filehdr->f_opthdr, 1, abfd);
-
-  for (i = SEG_E0; i < SEG_E9; i++) 
-  {
-    if (segment_info[i].scnhdr.s_name[0]) 
-    {  
-      unsigned int size =
-       bfd_coff_swap_scnhdr_out(abfd,
-                               &(segment_info[i].scnhdr),
-                               buffer);
-      bfd_write(buffer, size, 1, abfd);
-    }
-  }
-}
-
-
-char *
-DEFUN(symbol_to_chars,(abfd, where, symbolP),
-      bfd*abfd AND
-      char *where AND
-      symbolS *symbolP)
-{
-    unsigned int numaux = symbolP->sy_symbol.ost_entry.n_numaux;
-    unsigned int i;
-
-    /* Turn any symbols with register attributes into abs symbols */
-    if (S_GET_SEGMENT(symbolP) == SEG_REGISTER) 
-    {
-       S_SET_SEGMENT(symbolP, SEG_ABSOLUTE);
-    }
-    /* At the same time, relocate all symbols to their output value */
-
-    S_SET_VALUE(symbolP,
-               segment_info[S_GET_SEGMENT(symbolP)].scnhdr.s_paddr 
-               + S_GET_VALUE(symbolP));
-
-    where += bfd_coff_swap_sym_out(abfd, &symbolP->sy_symbol.ost_entry,
-                                  where);
-       
-    for (i = 0; i < numaux; i++) 
-    {
-       where += bfd_coff_swap_aux_out(abfd,
-                                      &symbolP->sy_symbol.ost_auxent[i],
-                                      S_GET_DATA_TYPE(symbolP),
-                                      S_GET_STORAGE_CLASS(symbolP),
-                                      where);
-    }
-    return where;
-  
-} 
-
-
-
-
-void obj_symbol_new_hook(symbolP)
-symbolS *symbolP;
-{
-       char underscore = 0;      /* Symbol has leading _ */
-
-       /* Effective symbol */
-       /* Store the pointer in the offset. */
-       S_SET_ZEROES(symbolP, 0L);
-       S_SET_DATA_TYPE(symbolP, T_NULL);
-       S_SET_STORAGE_CLASS(symbolP, 0);
-       S_SET_NUMBER_AUXILIARY(symbolP, 0);
-       /* Additional information */
-       symbolP->sy_symbol.ost_flags = 0;
-       /* Auxiliary entries */
-       bzero((char*)&symbolP->sy_symbol.ost_auxent[0], AUXESZ);
-
-#ifdef STRIP_UNDERSCORE
-       /* Remove leading underscore at the beginning of the symbol.
-        * This is to be compatible with the standard librairies.
-        */
-       if (*S_GET_NAME(symbolP) == '_') {
-               underscore = 1;
-               S_SET_NAME(symbolP, S_GET_NAME(symbolP) + 1);
-       } /* strip underscore */
-#endif /* STRIP_UNDERSCORE */
-
-       if (S_IS_STRING(symbolP))
-           SF_SET_STRING(symbolP);
-       if (!underscore && S_IS_LOCAL(symbolP))
-           SF_SET_LOCAL(symbolP);
-
-       return;
-} /* obj_symbol_new_hook() */
-
- /* stack stuff */
-stack* stack_init(chunk_size, element_size)
-unsigned long chunk_size;
-unsigned long element_size;
-{
-       stack* st;
-
-       if ((st = (stack*)malloc(sizeof(stack))) == (stack*)0)
-           return (stack*)0;
-       if ((st->data = malloc(chunk_size)) == (char*)0) {
-               free(st);
-               return (stack*)0;
-       }
-       st->pointer = 0;
-       st->size = chunk_size;
-       st->chunk_size = chunk_size;
-       st->element_size = element_size;
-       return st;
-} /* stack_init() */
-
-void stack_delete(st)
-stack* st;
-{
-    free(st->data);
-    free(st);
-}
-
-char *stack_push(st, element)
-stack *st;
-char *element;
-{
-       if (st->pointer + st->element_size >= st->size) {
-               st->size += st->chunk_size;
-               if ((st->data = xrealloc(st->data, st->size)) == (char*)0)
-                   return (char*)0;
-       }
-       memcpy(st->data + st->pointer, element, st->element_size);
-       st->pointer += st->element_size;
-       return st->data + st->pointer;
-} /* stack_push() */
-
-char* stack_pop(st)
-stack* st;
-{
-    if ((st->pointer -= st->element_size) < 0) {
-       st->pointer = 0;
-       return (char*)0;
-    }
-
-    return st->data + st->pointer;
-}
-
-char* stack_top(st)
-stack* st;
-{
-    return st->data + st->pointer - st->element_size;
-}
-
-
-/*
- * Handle .ln directives.
- */
-
-static void obj_coff_ln() {
-       if (def_symbol_in_progress != NULL) {
-               as_warn(".ln pseudo-op inside .def/.endef: ignored.");
-               demand_empty_rest_of_line();
-               return;
-       } /* wrong context */
-
-       c_line_new(0,
-                  obstack_next_free(&frags) - frag_now->fr_literal,
-                  get_absolute_expression(),
-                  frag_now);
-
-       demand_empty_rest_of_line();
-       return;
-} /* obj_coff_line() */
-
-/*
- *                     def()
- *
- * Handle .def directives.
- *
- * One might ask : why can't we symbol_new if the symbol does not
- * already exist and fill it with debug information.  Because of
- * the C_EFCN special symbol. It would clobber the value of the
- * function symbol before we have a chance to notice that it is
- * a C_EFCN. And a second reason is that the code is more clear this
- * way. (at least I think it is :-).
- *
- */
-
-#define SKIP_SEMI_COLON()      while (*input_line_pointer++ != ';')
-#define SKIP_WHITESPACES()     while (*input_line_pointer == ' ' || \
-                                     *input_line_pointer == '\t') \
-                                         input_line_pointer++;
-
-static void 
-DEFUN(obj_coff_def,(what),
-      int what)
-{
-    char name_end;             /* Char after the end of name */
-    char *symbol_name;         /* Name of the debug symbol */
-    char *symbol_name_copy;    /* Temporary copy of the name */
-    unsigned int symbol_name_length;
-    /*$char*   directiveP;$ */         /* Name of the pseudo opcode */
-    /*$char directive[MAX_DIRECTIVE];$ */ /* Backup of the directive */
-    /*$char end = 0;$ */ /* If 1, stop parsing */
-
-    if (def_symbol_in_progress != NULL) {
-           as_warn(".def pseudo-op used inside of .def/.endef: ignored.");
-           demand_empty_rest_of_line();
-           return;
-       }                       /* if not inside .def/.endef */
-
-    SKIP_WHITESPACES();
-
-    def_symbol_in_progress = (symbolS *) obstack_alloc(&notes, sizeof(*def_symbol_in_progress));
-    bzero(def_symbol_in_progress, sizeof(*def_symbol_in_progress));
-
-    symbol_name = input_line_pointer;
-    name_end = get_symbol_end();
-    symbol_name_length = strlen(symbol_name);
-    symbol_name_copy = xmalloc(symbol_name_length + 1);
-    strcpy(symbol_name_copy, symbol_name);
-
-    /* Initialize the new symbol */
-#ifdef STRIP_UNDERSCORE
-    S_SET_NAME(def_symbol_in_progress, (*symbol_name_copy == '_'
-                                       ? symbol_name_copy + 1
-                                       : symbol_name_copy));
-#else                          /* STRIP_UNDERSCORE */
-    S_SET_NAME(def_symbol_in_progress, symbol_name_copy);
-#endif                         /* STRIP_UNDERSCORE */
-    /* free(symbol_name_copy); */
-    def_symbol_in_progress->sy_name_offset = ~0;
-    def_symbol_in_progress->sy_number = ~0;
-    def_symbol_in_progress->sy_frag = &zero_address_frag;
-
-    if (S_IS_STRING(def_symbol_in_progress)) {
-           SF_SET_STRING(def_symbol_in_progress);
-       }                       /* "long" name */
-
-    *input_line_pointer = name_end;
-
-    demand_empty_rest_of_line();
-    return;
-}                              /* obj_coff_def() */
-
-unsigned int dim_index;
-static void 
-DEFUN_VOID(obj_coff_endef) 
-{
-    symbolS *symbolP = 0;
-    /* DIM BUG FIX sac@cygnus.com */
-    dim_index =0;
-    if (def_symbol_in_progress == NULL) {
-           as_warn(".endef pseudo-op used outside of .def/.endef: ignored.");
-           demand_empty_rest_of_line();
-           return;
-       }                       /* if not inside .def/.endef */
-
-    /* Set the section number according to storage class. */
-    switch (S_GET_STORAGE_CLASS(def_symbol_in_progress)) {
-         case C_STRTAG:
-         case C_ENTAG:
-         case C_UNTAG:
-           SF_SET_TAG(def_symbol_in_progress);
-           /* intentional fallthrough */
-         case C_FILE:
-         case C_TPDEF:
-           SF_SET_DEBUG(def_symbol_in_progress);
-           S_SET_SEGMENT(def_symbol_in_progress, SEG_DEBUG);
-           break;
-
-         case C_EFCN:
-           SF_SET_LOCAL(def_symbol_in_progress); /* Do not emit this symbol. */
-           /* intentional fallthrough */
-         case C_BLOCK:
-           SF_SET_PROCESS(def_symbol_in_progress); /* Will need processing before writing */
-           /* intentional fallthrough */
-         case C_FCN:
-           S_SET_SEGMENT(def_symbol_in_progress, SEG_E0);
-
-           if (def_symbol_in_progress->sy_symbol.ost_entry.n_name[1] == 'b') { /* .bf */
-                   if (function_lineoff < 0) {
-                           fprintf(stderr, "`.bf' symbol without preceding function\n");
-                       }       /* missing function symbol */
-                   SA_GET_SYM_LNNOPTR(def_symbol_in_progress) = function_lineoff;
-                   SF_SET_PROCESS(def_symbol_in_progress); /* Will need relocating */
-                   function_lineoff = -1;
-               }
-           break;
-
-#ifdef C_AUTOARG
-         case C_AUTOARG:
-#endif                         /* C_AUTOARG */
-         case C_AUTO:
-         case C_REG:
-         case C_MOS:
-         case C_MOE:
-         case C_MOU:
-         case C_ARG:
-         case C_REGPARM:
-         case C_FIELD:
-         case C_EOS:
-           SF_SET_DEBUG(def_symbol_in_progress);
-           S_SET_SEGMENT(def_symbol_in_progress, SEG_ABSOLUTE);
-           break;
-
-         case C_EXT:
-         case C_STAT:
-         case C_LABEL: 
-           /* Valid but set somewhere else (s_comm, s_lcomm, colon) */
-           break;
-
-         case C_USTATIC:
-         case C_EXTDEF:
-         case C_ULABEL:
-           as_warn("unexpected storage class %d", S_GET_STORAGE_CLASS(def_symbol_in_progress));
-           break;
-       }                       /* switch on storage class */
-
-    /* Now that we have built a debug symbol, try to
-       find if we should merge with an existing symbol
-       or not.  If a symbol is C_EFCN or SEG_ABSOLUTE or
-       untagged SEG_DEBUG it never merges. */
-
-    /* Two cases for functions.  Either debug followed
-       by definition or definition followed by debug.
-       For definition first, we will merge the debug
-       symbol into the definition.  For debug first, the
-       lineno entry MUST point to the definition
-       function or else it will point off into space
-       when crawl_symbols() merges the debug
-       symbol into the real symbol.  Therefor, let's
-       presume the debug symbol is a real function
-       reference. */
-
-    /* FIXME-SOON If for some reason the definition
-       label/symbol is never seen, this will probably
-       leave an undefined symbol at link time. */
-
-    if (S_GET_STORAGE_CLASS(def_symbol_in_progress) == C_EFCN
-       || (S_GET_SEGMENT(def_symbol_in_progress) == SEG_DEBUG
-           && !SF_GET_TAG(def_symbol_in_progress))
-       || S_GET_SEGMENT(def_symbol_in_progress) == SEG_ABSOLUTE
-       || (symbolP = symbol_find_base(S_GET_NAME(def_symbol_in_progress), DO_NOT_STRIP)) == NULL) {
-
-           symbol_append(def_symbol_in_progress, symbol_lastP, &symbol_rootP, &symbol_lastP);
-
-       } else {
-               /* This symbol already exists, merge the
-                  newly created symbol into the old one.
-                  This is not mandatory. The linker can
-                  handle duplicate symbols correctly. But I
-                  guess that it save a *lot* of space if
-                  the assembly file defines a lot of
-                  symbols. [loic] */
-
-               /* The debug entry (def_symbol_in_progress)
-                  is merged into the previous definition. */
-
-               c_symbol_merge(def_symbol_in_progress, symbolP);
-               /* FIXME-SOON Should *def_symbol_in_progress be free'd? xoxorich. */
-               def_symbol_in_progress = symbolP;
-
-               if (SF_GET_FUNCTION(def_symbol_in_progress)
-                   || SF_GET_TAG(def_symbol_in_progress)) {
-                       /* For functions, and tags, the symbol *must* be where the debug symbol
-                          appears.  Move the existing symbol to the current place. */
-                       /* If it already is at the end of the symbol list, do nothing */
-                       if (def_symbol_in_progress != symbol_lastP) {
-                               symbol_remove(def_symbol_in_progress, &symbol_rootP, &symbol_lastP);
-                               symbol_append(def_symbol_in_progress, symbol_lastP, &symbol_rootP, &symbol_lastP);
-                           }   /* if not already in place */
-                   }           /* if function */
-           }                   /* normal or mergable */
-
-    if (SF_GET_TAG(def_symbol_in_progress)
-       && symbol_find_base(S_GET_NAME(def_symbol_in_progress), DO_NOT_STRIP) == NULL) {
-           tag_insert(S_GET_NAME(def_symbol_in_progress), def_symbol_in_progress);
-       }                       /* If symbol is a {structure,union} tag, associate symbol to its name. */
-
-    if (SF_GET_FUNCTION(def_symbol_in_progress)) {
-           know(sizeof(def_symbol_in_progress) <= sizeof(long));
-           function_lineoff 
-            = c_line_new((long)
-                         def_symbol_in_progress,0, 0, &zero_address_frag);
-
-
-
-           SF_SET_PROCESS(def_symbol_in_progress);
-
-           if (symbolP == NULL) {
-                   /* That is, if this is the first
-                      time we've seen the function... */
-                   symbol_table_insert(def_symbol_in_progress);
-               }               /* definition follows debug */
-       }                       /* Create the line number entry pointing to the function being defined */
-
-    def_symbol_in_progress = NULL;
-    demand_empty_rest_of_line();
-    return;
-}                              /* obj_coff_endef() */
-
-static void 
-DEFUN_VOID(obj_coff_dim) 
-{
-    register int dim_index;
-
-    if (def_symbol_in_progress == NULL) 
-    {
-       as_warn(".dim pseudo-op used outside of .def/.endef: ignored.");
-       demand_empty_rest_of_line();
-       return;
-    }                          /* if not inside .def/.endef */
-
-    S_SET_NUMBER_AUXILIARY(def_symbol_in_progress, 1);
-
-    for (dim_index = 0; dim_index < DIMNUM; dim_index++) 
-    {
-       SKIP_WHITESPACES();
-       SA_SET_SYM_DIMEN(def_symbol_in_progress, dim_index, get_absolute_expression());
-
-       switch (*input_line_pointer) 
-       {
-
-         case ',':
-           input_line_pointer++;
-           break;
-
-         default:
-           as_warn("badly formed .dim directive ignored");
-           /* intentional fallthrough */
-         case '\n':
-         case ';':
-           dim_index = DIMNUM;
-           break;
-       }                       /* switch on following character */
-    }                          /* for each dimension */
-
-    demand_empty_rest_of_line();
-    return;
-}                              /* obj_coff_dim() */
-
-static void obj_coff_line() {
-       if (def_symbol_in_progress == NULL) {
-               obj_coff_ln();
-               return;
-       } /* if it looks like a stabs style line */
-
-       S_SET_NUMBER_AUXILIARY(def_symbol_in_progress, 1);
-       SA_SET_SYM_LNNO(def_symbol_in_progress, get_absolute_expression());
-
-       demand_empty_rest_of_line();
-       return;
-} /* obj_coff_line() */
-
-static void obj_coff_size() {
-       if (def_symbol_in_progress == NULL) {
-               as_warn(".size pseudo-op used outside of .def/.endef ignored.");
-               demand_empty_rest_of_line();
-               return;
-       } /* if not inside .def/.endef */
-
-       S_SET_NUMBER_AUXILIARY(def_symbol_in_progress, 1);
-       SA_SET_SYM_SIZE(def_symbol_in_progress, get_absolute_expression());
-       demand_empty_rest_of_line();
-       return;
-} /* obj_coff_size() */
-
-static void obj_coff_scl() {
-       if (def_symbol_in_progress == NULL) {
-               as_warn(".scl pseudo-op used outside of .def/.endef ignored.");
-               demand_empty_rest_of_line();
-               return;
-       } /* if not inside .def/.endef */
-
-       S_SET_STORAGE_CLASS(def_symbol_in_progress, get_absolute_expression());
-       demand_empty_rest_of_line();
-       return;
-} /* obj_coff_scl() */
-
-static void obj_coff_tag() {
-       char *symbol_name;
-       char name_end;
-
-       if (def_symbol_in_progress == NULL) {
-               as_warn(".tag pseudo-op used outside of .def/.endef ignored.");
-               demand_empty_rest_of_line();
-               return;
-       } /* if not inside .def/.endef */
-
-       S_SET_NUMBER_AUXILIARY(def_symbol_in_progress, 1);
-       symbol_name = input_line_pointer;
-       name_end = get_symbol_end();
-
-       /* Assume that the symbol referred to by .tag is always defined. */
-       /* This was a bad assumption.  I've added find_or_make. xoxorich. */
-       SA_SET_SYM_TAGNDX(def_symbol_in_progress, (long) tag_find_or_make(symbol_name));
-       if (SA_GET_SYM_TAGNDX(def_symbol_in_progress) == 0L) {
-               as_warn("tag not found for .tag %s", symbol_name);
-       } /* not defined */
-
-       SF_SET_TAGGED(def_symbol_in_progress);
-       *input_line_pointer = name_end;
-
-       demand_empty_rest_of_line();
-       return;
-} /* obj_coff_tag() */
-
-static void obj_coff_type() {
-       if (def_symbol_in_progress == NULL) {
-               as_warn(".type pseudo-op used outside of .def/.endef ignored.");
-               demand_empty_rest_of_line();
-               return;
-       } /* if not inside .def/.endef */
-
-       S_SET_DATA_TYPE(def_symbol_in_progress, get_absolute_expression());
-
-       if (ISFCN(S_GET_DATA_TYPE(def_symbol_in_progress)) &&
-           S_GET_STORAGE_CLASS(def_symbol_in_progress) != C_TPDEF) {
-               SF_SET_FUNCTION(def_symbol_in_progress);
-       } /* is a function */
-
-       demand_empty_rest_of_line();
-       return;
-} /* obj_coff_type() */
-
-static void obj_coff_val() {
-       if (def_symbol_in_progress == NULL) {
-               as_warn(".val pseudo-op used outside of .def/.endef ignored.");
-               demand_empty_rest_of_line();
-               return;
-       } /* if not inside .def/.endef */
-
-       if (is_name_beginner(*input_line_pointer)) {
-               char *symbol_name = input_line_pointer;
-               char name_end = get_symbol_end();
-
-               if (!strcmp(symbol_name, ".")) {
-                       def_symbol_in_progress->sy_frag = frag_now;
-                       S_SET_VALUE(def_symbol_in_progress, obstack_next_free(&frags) - frag_now->fr_literal);
-                       /* If the .val is != from the .def (e.g. statics) */
-               } else if (strcmp(S_GET_NAME(def_symbol_in_progress), symbol_name)) {
-                       def_symbol_in_progress->sy_forward = symbol_find_or_make(symbol_name);
-
-                       /* If the segment is undefined when the forward
-                          reference is solved, then copy the segment id
-                          from the forward symbol. */
-                       SF_SET_GET_SEGMENT(def_symbol_in_progress);
-               }
-               /* Otherwise, it is the name of a non debug symbol and its value will be calculated later. */
-               *input_line_pointer = name_end;
-       } else {
-               S_SET_VALUE(def_symbol_in_progress, get_absolute_expression());
-       } /* if symbol based */
-
-       demand_empty_rest_of_line();
-       return;
-} /* obj_coff_val() */
-
-/*
- * Maintain a list of the tagnames of the structres.
- */
-
-static void tag_init() {
-    tag_hash = hash_new();
-    return ;
-} /* tag_init() */
-
-static void tag_insert(name, symbolP)
-char *name;
-symbolS *symbolP;
-{
-       register char * error_string;
-
-       if (*(error_string = hash_jam(tag_hash, name, (char *)symbolP))) {
-               as_fatal("Inserting \"%s\" into structure table failed: %s",
-                        name, error_string);
-       }
-       return ;
-} /* tag_insert() */
-
-static symbolS *tag_find_or_make(name)
-char *name;
-{
-       symbolS *symbolP;
-
-       if ((symbolP = tag_find(name)) == NULL) {
-               symbolP = symbol_new(name,
-                                    SEG_UNKNOWN,
-                                    0,
-                                    &zero_address_frag);
-
-               tag_insert(S_GET_NAME(symbolP), symbolP);
-               symbol_table_insert(symbolP);
-       } /* not found */
-
-       return(symbolP);
-} /* tag_find_or_make() */
-
-static symbolS *tag_find(name)
-char *name;
-{
-#ifdef STRIP_UNDERSCORE
-       if (*name == '_') name++;
-#endif /* STRIP_UNDERSCORE */
-       return((symbolS*)hash_find(tag_hash, name));
-} /* tag_find() */
-
-void obj_read_begin_hook() {
- /* These had better be the same.  Usually 18 bytes. */
-#ifndef BFD_HEADERS
-       know(sizeof(SYMENT) == sizeof(AUXENT));
-       know(SYMESZ == AUXESZ);
-#endif
-       tag_init();
-
-       return;
-} /* obj_read_begin_hook() */
-
-/* This function runs through the symbol table and puts all the
-   externals onto another chain */
-
-/* The chain of externals */
-symbolS *symbol_externP = NULL;
-symbolS *symbol_extern_lastP = NULL;
-
-stack*block_stack;
-  symbolS *last_functionP = NULL;
-  symbolS *last_tagP;
-
-
-static unsigned int DEFUN_VOID(yank_symbols)
-{
-  symbolS *symbolP;
-  unsigned int symbol_number =0;
-  
-  for (symbolP = symbol_rootP;
-       symbolP;
-       symbolP = symbolP ? symbol_next(symbolP) : symbol_rootP) {
-      if (!SF_GET_DEBUG(symbolP)) {
-         /* Debug symbols do not need all this rubbish */
-         symbolS* real_symbolP;
-
-         /* L* and C_EFCN symbols never merge. */
-         if (!SF_GET_LOCAL(symbolP)
-             && (real_symbolP = symbol_find_base(S_GET_NAME(symbolP), DO_NOT_STRIP))
-             && real_symbolP != symbolP) {
-             /* FIXME-SOON: where do dups come from?
-                Maybe tag references before definitions? xoxorich. */
-             /* Move the debug data from the debug symbol to the
-                real symbol. Do NOT do the oposite (i.e. move from
-                real symbol to debug symbol and remove real symbol from the
-                list.) Because some pointers refer to the real symbol
-                whereas no pointers refer to the debug symbol. */
-             c_symbol_merge(symbolP, real_symbolP);
-             /* Replace the current symbol by the real one */
-             /* The symbols will never be the last or the first
-                because : 1st symbol is .file and 3 last symbols are
-                .text, .data, .bss */
-             symbol_remove(real_symbolP, &symbol_rootP, &symbol_lastP);
-             symbol_insert(real_symbolP, symbolP, &symbol_rootP, &symbol_lastP);
-             symbol_remove(symbolP, &symbol_rootP, &symbol_lastP);
-             symbolP = real_symbolP;
-           }                   /* if not local but dup'd */
-
-         if (flagseen['R'] && (S_GET_SEGMENT(symbolP) == SEG_E1)) {
-             S_SET_SEGMENT(symbolP, SEG_E0);
-           }                   /* push data into text */
-
-         S_SET_VALUE(symbolP,
-                     S_GET_VALUE(symbolP) + symbolP->sy_frag->fr_address);
-
-         if (!S_IS_DEFINED(symbolP) && !SF_GET_LOCAL(symbolP)) 
-         {
-           S_SET_EXTERNAL(symbolP);
-         } 
-         else if (S_GET_STORAGE_CLASS(symbolP) == C_NULL) 
-         {
-           if (S_GET_SEGMENT(symbolP) == SEG_E0)
-           {
-             S_SET_STORAGE_CLASS(symbolP, C_LABEL);
-           } 
-           else 
-           {
-             S_SET_STORAGE_CLASS(symbolP, C_STAT);
-           }
-         }             
-
-         /* Mainly to speed up if not -g */
-         if (SF_GET_PROCESS(symbolP)) 
-         {
-           /* Handle the nested blocks auxiliary info. */
-           if (S_GET_STORAGE_CLASS(symbolP) == C_BLOCK) {
-               if (!strcmp(S_GET_NAME(symbolP), ".bb"))
-                stack_push(block_stack, (char *) &symbolP);
-               else {          /* .eb */
-                   register symbolS* begin_symbolP;
-                   begin_symbolP = *(symbolS**)stack_pop(block_stack);
-                   if (begin_symbolP == (symbolS*)0)
-                    as_warn("mismatched .eb");
-                   else
-                    SA_SET_SYM_ENDNDX(begin_symbolP, symbol_number+2);
-                 }
-             }
-           /* If we are able to identify the type of a function, and we
-              are out of a function (last_functionP == 0) then, the
-              function symbol will be associated with an auxiliary
-              entry. */
-           if (last_functionP == (symbolS*)0 &&
-               SF_GET_FUNCTION(symbolP)) {
-               last_functionP = symbolP;
-
-               if (S_GET_NUMBER_AUXILIARY(symbolP) < 1) {
-                   S_SET_NUMBER_AUXILIARY(symbolP, 1);
-                 }             /* make it at least 1 */
-
-               /* Clobber possible stale .dim information. */
-               bzero(symbolP->sy_symbol.ost_auxent[0].x_sym.x_fcnary.x_ary.x_dimen,
-                     sizeof(symbolP->sy_symbol.ost_auxent[0].x_sym.x_fcnary.x_ary.x_dimen));
-             }
-           /* The C_FCN doesn't need any additional information.
-              I don't even know if this is needed for sdb. But the
-              standard assembler generates it, so...
-              */
-           if (S_GET_STORAGE_CLASS(symbolP) == C_EFCN) {
-               if (last_functionP == (symbolS*)0)
-                as_fatal("C_EFCN symbol out of scope");
-               SA_SET_SYM_FSIZE(last_functionP,
-                                (long)(S_GET_VALUE(symbolP) -
-                                       S_GET_VALUE(last_functionP)));
-               SA_SET_SYM_ENDNDX(last_functionP, symbol_number);
-               last_functionP = (symbolS*)0;
-             }
-         }
-       } else if (SF_GET_TAG(symbolP)) {
-           /* First descriptor of a structure must point to
-              the first slot after the structure description. */
-           last_tagP = symbolP;
-
-         } else if (S_GET_STORAGE_CLASS(symbolP) == C_EOS) {
-             /* +2 take in account the current symbol */
-             SA_SET_SYM_ENDNDX(last_tagP, symbol_number + 2);
-           } else if (S_GET_STORAGE_CLASS(symbolP) == C_FILE) {
-               if (S_GET_VALUE(symbolP)) {
-                   S_SET_VALUE((symbolS *) S_GET_VALUE(symbolP), symbol_number);
-                   S_SET_VALUE(symbolP, 0);
-                 }             /* no one points at the first .file symbol */
-             }                 /* if debug or tag or eos or file */
-
-      /* We must put the external symbols apart. The loader
-        does not bomb if we do not. But the references in
-        the endndx field for a .bb symbol are not corrected
-        if an external symbol is removed between .bb and .be.
-        I.e in the following case :
-        [20] .bb endndx = 22
-        [21] foo external
-        [22] .be
-        ld will move the symbol 21 to the end of the list but
-        endndx will still be 22 instead of 21. */
-
-
-      if (SF_GET_LOCAL(symbolP)) {
-         /* remove C_EFCN and LOCAL (L...) symbols */
-         /* next pointer remains valid */
-         symbol_remove(symbolP, &symbol_rootP, &symbol_lastP);
-
-       }
-      else if (!S_IS_DEFINED(symbolP)
-              && !S_IS_DEBUG(symbolP) 
-              && !SF_GET_STATICS(symbolP) &&
-              S_GET_STORAGE_CLASS(symbolP) == C_EXT)
-      { /* C_EXT && !SF_GET_FUNCTION(symbolP))  */
-           /* if external, Remove from the list */
-           symbolS *hold = symbol_previous(symbolP);
-
-           symbol_remove(symbolP, &symbol_rootP, &symbol_lastP);
-           symbol_clear_list_pointers(symbolP);
-           symbol_append(symbolP, symbol_extern_lastP, &symbol_externP, &symbol_extern_lastP);
-           symbolP = hold;
-         } else {
-             if (SF_GET_STRING(symbolP)) {
-                 symbolP->sy_name_offset = string_byte_count;
-                 string_byte_count += strlen(S_GET_NAME(symbolP)) + 1;
-               } else {
-                   symbolP->sy_name_offset = 0;
-                 }             /* fix "long" names */
-
-             symbolP->sy_number = symbol_number;
-             symbol_number += 1 + S_GET_NUMBER_AUXILIARY(symbolP);
-           }                   /* if local symbol */
-    }                          /* traverse the symbol list */
-  return symbol_number;
-  
-}
-
-
-static unsigned int DEFUN_VOID(glue_symbols)
-{
-  unsigned int symbol_number = 0;
-  symbolS *symbolP;    
-  for (symbolP = symbol_externP; symbol_externP;) {
-      symbolS *tmp = symbol_externP;
-
-      /* append */
-      symbol_remove(tmp, &symbol_externP, &symbol_extern_lastP);
-      symbol_append(tmp, symbol_lastP, &symbol_rootP, &symbol_lastP);
-
-      /* and process */
-      if (SF_GET_STRING(tmp)) {
-         tmp->sy_name_offset = string_byte_count;
-         string_byte_count += strlen(S_GET_NAME(tmp)) + 1;
-       } else {
-           tmp->sy_name_offset = 0;
-         }                     /* fix "long" names */
-
-      tmp->sy_number = symbol_number;
-      symbol_number += 1 + S_GET_NUMBER_AUXILIARY(tmp);
-    }                          /* append the entire extern chain */
-  return symbol_number;
-  
-}
-
-static unsigned int DEFUN_VOID(tie_tags)
-{
-  unsigned int symbol_number = 0;
-  
-  symbolS*symbolP;  
-  for (symbolP = symbol_rootP; symbolP; symbolP =
-       symbol_next(symbolP)) 
-  {
-    symbolP->sy_number = symbol_number;
-
-
-
-    if (SF_GET_TAGGED(symbolP)) 
-    {
-      SA_SET_SYM_TAGNDX
-       (symbolP,
-       ((symbolS*) SA_GET_SYM_TAGNDX(symbolP))->sy_number);
-    }          
-
-    symbol_number += 1 + S_GET_NUMBER_AUXILIARY(symbolP);
-  }            
-  return symbol_number;
-  
-}
-
-static void 
-DEFUN(crawl_symbols,(headers, abfd),
-      struct    internal_filehdr *headers AND
-      bfd *abfd)
-{
-
-  unsigned int i;      
-  unsigned int ptr = 0;
-
-
-  symbolS *symbolP;
-
-  /* Initialize the stack used to keep track of the matching .bb .be */
-
-  block_stack = stack_init(512, sizeof(symbolS*));
-  /* JF deal with forward references first... */
-  for (symbolP = symbol_rootP;
-       symbolP;
-       symbolP = symbol_next(symbolP)) 
-  {
-
-    if (symbolP->sy_forward) {
-       S_SET_VALUE(symbolP, (S_GET_VALUE(symbolP)
-                             + S_GET_VALUE(symbolP->sy_forward)
-                             + symbolP->sy_forward->sy_frag->fr_address));
-
-       if (SF_GET_GET_SEGMENT(symbolP)) {
-           S_SET_SEGMENT(symbolP, S_GET_SEGMENT(symbolP->sy_forward));
-         }                     /* forward segment also */
-
-       symbolP->sy_forward=0;
-      }                                /* if it has a forward reference */
-  }                            /* walk the symbol chain */
-
-
-  /* The symbol list should be ordered according to the following sequence
-   * order :
-   * . .file symbol
-   * . debug entries for functions
-   * . fake symbols for the sections, including.text .data and .bss
-   * . defined symbols
-   * . undefined symbols
-   * But this is not mandatory. The only important point is to put the
-   * undefined symbols at the end of the list.
-   */
-
-  if (symbol_rootP == NULL
-      || S_GET_STORAGE_CLASS(symbol_rootP) != C_FILE) {
-      c_dot_file_symbol("fake");
-    }
-  /* Is there a .file symbol ? If not insert one at the beginning. */
-
-  /*
-   * Build up static symbols for the sections, they are filled in later
-   */
-
-
-  for (i = SEG_E0; i < SEG_E9; i++) 
-  {
-    if (segment_info[i].scnhdr.s_name[0])
-    {
-      segment_info[i].dot = 
-       c_section_symbol(segment_info[i].scnhdr.s_name,
-                       i-SEG_E0+1);
-           
-    }
-  }
-
-
-  /* Take all the externals out and put them into another chain */
-  headers->f_nsyms =   yank_symbols();
-  /* Take the externals and glue them onto the end.*/
-  headers->f_nsyms +=  glue_symbols();
-
-  headers->f_nsyms =   tie_tags();
-  know(symbol_externP == NULL);
-  know(symbol_extern_lastP  == NULL);
-
-  return;
-}
-
-/*
- * Find strings by crawling along symbol table chain.
- */
-
-void DEFUN(w_strings,(where),
-          char *where)
-{
-  symbolS *symbolP;
-
-  /* Gotta do md_ byte-ordering stuff for string_byte_count first - KWK */
-  md_number_to_chars(where, string_byte_count, sizeof(string_byte_count));
-  where += sizeof(string_byte_count);
-  for (symbolP = symbol_rootP;
-       symbolP;
-       symbolP = symbol_next(symbolP)) 
-  {
-    unsigned int size;
-    
-    if (SF_GET_STRING(symbolP)) {
-       size = strlen(S_GET_NAME(symbolP)) + 1;
-           
-       memcpy(where,  S_GET_NAME(symbolP),size);
-       where += size;
-           
-      }        
-  }            
-
-}
-
-
-
-
-
-static void 
-DEFUN(do_linenos_for,(abfd, file_cursor),
-      bfd *abfd AND
-      unsigned long *file_cursor)
-{
-  unsigned int idx;
-  
-  for (idx = SEG_E0;  idx < SEG_E9; idx++) 
-  {
-    segment_info_type *s =   segment_info + idx;    
-
-    if (s->scnhdr.s_nlnno != 0) 
-    {
-      struct lineno_list *line_ptr ;
-
-      struct external_lineno *buffer = 
-       (struct external_lineno *)xmalloc(s->scnhdr.s_nlnno * LINESZ);
-
-      struct external_lineno *dst= buffer;
-  
-      /* Run through the table we've built and turn it into its external
-        form */
-
-      for (line_ptr = s->lineno_list_head;
-          line_ptr != (struct lineno_list *)NULL;
-          line_ptr = line_ptr->next) 
-      {
-       if (line_ptr->line.l_lnno == 0) 
-       {
-         /* Turn a pointer to a symbol into the symbols' index */
-         line_ptr->line.l_addr.l_symndx =
-          ( (symbolS *)line_ptr->line.l_addr.l_symndx)->sy_number;
-       }         
-       (void)  bfd_coff_swap_lineno_out(abfd, &(line_ptr->line), dst);
-       dst++;
-      }
-
-      s->scnhdr.s_lnnoptr = *file_cursor;
-      
-      bfd_write(buffer, 1, s->scnhdr.s_nlnno* LINESZ, abfd);
-      free(buffer);
-      
-      *file_cursor += s->scnhdr.s_nlnno * LINESZ;
-    }
-  }
-}
-
-
-/* Now we run through the list of frag chains in a segment and
-   make all the subsegment frags appear at the end of the
-   list, as if the seg 0 was extra long */
-
-static void DEFUN_VOID(remove_subsegs)
-{
-    unsigned int i;            
-
-    for (i = SEG_E0; i < SEG_UNKNOWN; i++)
-    { 
-       frchainS *head =  segment_info[i].frchainP;
-       fragS dummy;
-       fragS * prev_frag = &dummy;
-       
-       while (head && head->frch_seg == i) 
-       {
-           prev_frag->fr_next = head->frch_root;
-           prev_frag = head->frch_last;
-           head = head->frch_next;
-       }
-       prev_frag->fr_next = 0;
-    }
-}
-
-
-extern void DEFUN_VOID(write_object_file)
-{
-    int i;
-    struct frchain *frchain_ptr; 
-
-    struct internal_filehdr filehdr;
-    struct internal_aouthdr aouthdr;
-    unsigned long file_cursor;  
-    bfd *abfd;
-      unsigned int addr = 0;  
-    abfd = bfd_openw(out_file_name, TARGET_FORMAT);
-
-
-    if (abfd == 0) {
-           as_perror ("FATAL: Can't create %s", out_file_name);
-           exit(42);
-       }
-    bfd_set_format(abfd, bfd_object);
-    bfd_set_arch_mach(abfd, BFD_ARCH, 0);
-
-
-
-    string_byte_count = 4;
-  
-    for (frchain_ptr = frchain_root;
-        frchain_ptr != (struct frchain *)NULL; 
-        frchain_ptr = frchain_ptr->frch_next) {
-           /* Run through all the sub-segments and align them up. Also close any
-              open frags. We tack a .fill onto the end of the frag chain so
-              that any .align's size can be worked by looking at the next
-              frag */
-
-           subseg_new(frchain_ptr->frch_seg, frchain_ptr->frch_subseg);
-#define SUB_SEGMENT_ALIGN 1
-           frag_align(SUB_SEGMENT_ALIGN,0);
-           frag_wane(frag_now);
-           frag_now->fr_fix = 0;
-           know( frag_now->fr_next == NULL );
-       }
-
-
-    remove_subsegs();
-    
-
-    for (i = SEG_E0; i < SEG_UNKNOWN; i++) 
-    {
-       relax_segment(segment_info[i].frchainP->frch_root, i);
-    }
-  
-
-
-
-
-      filehdr.f_nscns = 0;
-  
-      /* Find out how big the sections are */
-      for (i = SEG_E0; i < SEG_UNKNOWN; i++) 
-      {
-
-         if (segment_info[i].scnhdr.s_name[0]) 
-         {
-             filehdr.f_nscns++;
-         }
-         segment_info[i].scnhdr.s_paddr = addr;
-         if (i == SEG_E2) {
-                 /* THis is a special case, we leave the size alone, which will have */
-                 /* been made up from all and any lcomms seen */
-             }
-         else {
-                 addr += size_section(abfd, i);
-             }
-      }
-
-
-
-    /* Turn the gas native symbol table shape into a coff symbol table */
-    crawl_symbols(&filehdr, abfd);
-
-    for (i = SEG_E0; i < SEG_UNKNOWN; i++) 
-    {
-       fixup_segment(segment_info[i].fix_root, i);
-    }
-
-    file_cursor =   FILHSZ + SCNHSZ * filehdr.f_nscns ;
-
-    bfd_seek(abfd, file_cursor, 0);
-
-
-    do_relocs_for(abfd, &file_cursor);
-
-    do_linenos_for(abfd, &file_cursor);
-
-
-    /* Plant the data */
-
-    fill_section(abfd,&filehdr, &file_cursor);
-
-    filehdr.f_magic = COFF_MAGIC;
-    filehdr.f_timdat = 0;
-    filehdr.f_flags = 0;
-
-
-
-  {
-
-      unsigned int   symtable_size = filehdr.f_nsyms * SYMESZ;
-      char *buffer1 = malloc(symtable_size + string_byte_count + 4);
-      char *ptr = buffer1;
-      filehdr.f_symptr = bfd_tell(abfd);
-      w_symbols(abfd, buffer1, symbol_rootP);
-      w_strings(buffer1 + symtable_size);
-      bfd_write(buffer1, 1,symtable_size +  string_byte_count + 4, abfd);
-      free(buffer1);
-      
-  }
-    coff_header_append(abfd, &filehdr, &aouthdr);
-
-    bfd_close_all_done(abfd);
-}
-
-
-static void DEFUN(change_to_section,(name, len, exp),
- char *name AND
- unsigned int len AND
- unsigned int exp)
-{
-  unsigned int i;  
-  /* Find out if we've already got a section of this name etc */
-  for(i = SEG_E0; i < SEG_E9 && segment_info[i].scnhdr.s_name[0] ; i++) 
-  {
-    if (strncmp(segment_info[i].scnhdr.s_name, name, len) == 0) 
-    {
-      subseg_new(i, exp);  
-      return;
-      
-    }
-  }
-  /* No section, add one */
-  strncpy(segment_info[i].scnhdr.s_name, name, 8);
-  subseg_new(i, exp);  
-}
-
-static void 
-DEFUN_VOID(obj_coff_section)
-{
-    /* Strip out the section name */
-    char *section_name ;
-    char *section_name_end;
-    char c;
-    
-    unsigned int len;
-    unsigned int exp;
-  
-    section_name =  input_line_pointer;
-    c =   get_symbol_end();
-    section_name_end =  input_line_pointer;
-
-    len = section_name_end - section_name ;
-    input_line_pointer++;
-    SKIP_WHITESPACE();
-    if (c == ',')
-    {
-       exp = get_absolute_expression();
-    }
-    else if ( *input_line_pointer == ',') 
-    {
-    
-       input_line_pointer++;
-       exp = get_absolute_expression();    
-    }
-    else 
-    {
-       exp = 0;
-    }
-  
-    change_to_section(section_name, len,exp);
-  
-}
-
-
-static void obj_coff_text()
-{
-  change_to_section(".text",5, get_absolute_expression());
-}
-
-
-static void obj_coff_data()
-{
-  change_to_section(".data",5, get_absolute_expression());
-}
-
-void c_symbol_merge(debug, normal)
-symbolS *debug;
-symbolS *normal;
-{
-       S_SET_DATA_TYPE(normal, S_GET_DATA_TYPE(debug));
-       S_SET_STORAGE_CLASS(normal, S_GET_STORAGE_CLASS(debug));
-
-       if (S_GET_NUMBER_AUXILIARY(debug) > S_GET_NUMBER_AUXILIARY(normal)) {
-               S_SET_NUMBER_AUXILIARY(normal, S_GET_NUMBER_AUXILIARY(debug));
-       } /* take the most we have */
-
-       if (S_GET_NUMBER_AUXILIARY(debug) > 0) {
-               memcpy((char*)&normal->sy_symbol.ost_auxent[0], (char*)&debug->sy_symbol.ost_auxent[0], S_GET_NUMBER_AUXILIARY(debug) * AUXESZ);
-       } /* Move all the auxiliary information */
-
-       /* Move the debug flags. */
-       SF_SET_DEBUG_FIELD(normal, SF_GET_DEBUG_FIELD(debug));
-} /* c_symbol_merge() */
-
-static int
-DEFUN(c_line_new,(symbol, paddr, line_number, frag),
-      symbolS *symbol AND
-      long paddr AND
-      unsigned short line_number AND
-      fragS* frag)
-{
-  struct lineno_list* new_line = 
-   (struct lineno_list *)xmalloc(sizeof(struct lineno_list));
-    
-  segment_info_type *s =   segment_info + now_seg;
-  new_line->line.l_lnno = line_number;
-  if (line_number == 0) 
-  {
-    new_line->line.l_addr.l_symndx = (long)symbol;
-  }
-  else 
-  {
-    new_line->line.l_addr.l_paddr = paddr;
-  }  
-
-  new_line->frag = (char*)frag;
-  new_line->next = (struct lineno_list*)NULL;
-
-    
-  if (s->lineno_list_head == (struct lineno_list *)NULL) 
-  {
-    s->lineno_list_head = new_line;
-  }
-  else 
-  {
-    s->lineno_list_tail->next = new_line;
-  }
-  s->lineno_list_tail = new_line;
-  return LINESZ *     s->scnhdr.s_nlnno ++;
-}
-
-void c_dot_file_symbol(filename)
-char *filename;
-{
-    symbolS* symbolP;
-
-    symbolP = symbol_new(".file",
-                        SEG_DEBUG,
-                        0,
-                        &zero_address_frag);
-
-    S_SET_STORAGE_CLASS(symbolP, C_FILE);
-    S_SET_NUMBER_AUXILIARY(symbolP, 1);
-    SA_SET_FILE_FNAME(symbolP, filename);
-    SF_SET_DEBUG(symbolP);
-    S_SET_VALUE(symbolP, (long) previous_file_symbol);
-
-    previous_file_symbol = symbolP;
-
-    /* Make sure that the symbol is first on the symbol chain */
-    if (symbol_rootP != symbolP) {
-           if (symbolP == symbol_lastP) {
-                   symbol_lastP = symbol_lastP->sy_previous;
-           } /* if it was the last thing on the list */
-
-           symbol_remove(symbolP, &symbol_rootP, &symbol_lastP);
-           symbol_insert(symbolP, symbol_rootP, &symbol_rootP, &symbol_lastP);
-           symbol_rootP = symbolP;
-    } /* if not first on the list */
-
-} /* c_dot_file_symbol() */
-
-/*
- * Build a 'section static' symbol.
- */
-
-symbolS *c_section_symbol(name,idx)
-char *name;
-int idx;
-{
-    symbolS *symbolP;
-
-    symbolP = symbol_new(name,idx,
-                        0,
-                        &zero_address_frag);
-
-    S_SET_STORAGE_CLASS(symbolP, C_STAT);
-    S_SET_NUMBER_AUXILIARY(symbolP, 1);
-
-    SF_SET_STATICS(symbolP);
-
-    return symbolP;
-} /* c_section_symbol() */
-
-static void 
-DEFUN(w_symbols,(abfd, where, symbol_rootP),
-bfd *abfd AND
-char *where AND
-symbolS *symbol_rootP)
-{
-    symbolS *symbolP;
-    unsigned int i;
-    
-    /* First fill in those values we have only just worked out */
-    for (i = SEG_E0; i < SEG_E9; i++) 
-    {
-       symbolP = segment_info[i].dot;
-       if (symbolP) 
-       {
-    
-           SA_SET_SCN_SCNLEN(symbolP, segment_info[i].scnhdr.s_size);
-           SA_SET_SCN_NRELOC(symbolP, segment_info[i].scnhdr.s_nreloc);
-           SA_SET_SCN_NLINNO(symbolP, segment_info[i].scnhdr.s_nlnno);
-           
-       }
-    }
-    
-    /*
-     * Emit all symbols left in the symbol chain.
-     */
-    for (symbolP = symbol_rootP; symbolP; symbolP = symbol_next(symbolP)) {
-           /* Used to save the offset of the name. It is used to point
-              to the string in memory but must be a file offset. */
-           register char *     temp;
-
-           tc_coff_symbol_emit_hook(symbolP);
-
-           temp = S_GET_NAME(symbolP);
-           if (SF_GET_STRING(symbolP)) {
-                   S_SET_OFFSET(symbolP, symbolP->sy_name_offset);
-                   S_SET_ZEROES(symbolP, 0);
-               } else {
-                       bzero(symbolP->sy_symbol.ost_entry.n_name, SYMNMLEN);
-                       strncpy(symbolP->sy_symbol.ost_entry.n_name, temp, SYMNMLEN);
-                   }
-           where =  symbol_to_chars(abfd, where, symbolP);
-           S_SET_NAME(symbolP,temp);
-       }
-    
-}                              /* w_symbols() */
-
-static void DEFUN_VOID(obj_coff_lcomm)
-{
-    char *name;
-    char c;
-    int temp;
-    char *p;
-    symbolS *symbolP;
-    name = input_line_pointer;
-
-
-
-    c = get_symbol_end();
-    p = input_line_pointer;
-    *p = c;
-    SKIP_WHITESPACE();
-    if (*input_line_pointer != ',') {
-           as_bad("Expected comma after name");
-           ignore_rest_of_line();
-           return;
-       }
-    if (*input_line_pointer == '\n') {
-           as_bad("Missing size expression");
-           return;
-       }
-    input_line_pointer++;
-    if ((temp = get_absolute_expression ()) < 0) {
-           as_warn("lcomm length (%d.) <0! Ignored.", temp);
-           ignore_rest_of_line();
-           return;
-       }
-    *p = 0;
-    symbolP = symbol_find_or_make(name);
-    S_SET_VALUE(symbolP, segment_info[SEG_E2].scnhdr.s_size);
-    S_SET_SEGMENT(symbolP, SEG_E2);
-    segment_info[SEG_E2].scnhdr.s_size += temp;
-    S_SET_STORAGE_CLASS(symbolP, C_STAT);
-    demand_empty_rest_of_line();
-}
-
-
-#if 1
-static void DEFUN(fixup_segment,(fixP, this_segment_type),
-register fixS *        fixP AND
-segT           this_segment_type)
-{
-    register symbolS *add_symbolP;
-    register symbolS *sub_symbolP;
-    register long add_number;
-    register int size;
-    register char *place;
-    register long where;
-    register char pcrel;
-    register fragS *fragP;
-    register segT add_symbol_segment = SEG_ABSOLUTE;
-       
-       
-    for ( ;  fixP;  fixP = fixP->fx_next) 
-    {
-       fragP       = fixP->fx_frag;
-       know(fragP);
-       where     = fixP->fx_where;
-       place       = fragP->fr_literal + where;
-       size      = fixP->fx_size;
-       add_symbolP = fixP->fx_addsy;
-#ifdef TC_I960
-       if (fixP->fx_callj && TC_S_IS_CALLNAME(add_symbolP)) {
-               /* Relocation should be done via the
-                  associated 'bal' entry point
-                  symbol. */
-
-               if (!TC_S_IS_BALNAME(tc_get_bal_of_call(add_symbolP))) {
-                       as_bad("No 'bal' entry point for leafproc %s",
-                              S_GET_NAME(add_symbolP));
-                       continue;
-                   }
-               fixP->fx_addsy = add_symbolP = tc_get_bal_of_call(add_symbolP);
-           }                   /* callj relocation */
-#endif
-       sub_symbolP = fixP->fx_subsy;
-       add_number  = fixP->fx_offset;
-       pcrel     = fixP->fx_pcrel;
-
-       if (add_symbolP) {
-               add_symbol_segment = S_GET_SEGMENT(add_symbolP);
-           }                   /* if there is an addend */
-               
-       if (sub_symbolP) {
-               if (!add_symbolP) {
-                       /* Its just -sym */
-                       if (S_GET_SEGMENT(sub_symbolP) != SEG_ABSOLUTE) {
-                               as_bad("Negative of non-absolute symbol %s", S_GET_NAME(sub_symbolP));
-                           }   /* not absolute */
-                               
-                       add_number -= S_GET_VALUE(sub_symbolP);
-                               
-                       /* if sub_symbol is in the same segment that add_symbol
-                          and add_symbol is either in DATA, TEXT, BSS or ABSOLUTE */
-                   } else if ((S_GET_SEGMENT(sub_symbolP) == add_symbol_segment)
-                              && (SEG_NORMAL(add_symbol_segment)
-                                  || (add_symbol_segment == SEG_ABSOLUTE))) {
-                           /* Difference of 2 symbols from same segment. */
-                           /* Can't make difference of 2 undefineds: 'value' means */
-                           /* something different for N_UNDF. */
-#ifdef TC_I960
-                           /* Makes no sense to use the difference of 2 arbitrary symbols
-                            * as the target of a call instruction.
-                            */
-                           if (fixP->fx_callj) {
-                                   as_bad("callj to difference of 2 symbols");
-                               }
-#endif                         /* TC_I960 */
-                           add_number += S_GET_VALUE(add_symbolP) - 
-                            S_GET_VALUE(sub_symbolP);
-                               
-                           add_symbolP = NULL;
-                           fixP->fx_addsy = NULL;
-                       } else {
-                               /* Different segments in subtraction. */
-                               know(!(S_IS_EXTERNAL(sub_symbolP) && (S_GET_SEGMENT(sub_symbolP) == SEG_ABSOLUTE)));
-                               
-                               if ((S_GET_SEGMENT(sub_symbolP) == SEG_ABSOLUTE)) {
-                                       add_number -= S_GET_VALUE(sub_symbolP);
-                                   } else {
-                                           as_bad("Can't emit reloc {- %s-seg symbol \"%s\"} @ file address %d.",
-                                                  segment_name(S_GET_SEGMENT(sub_symbolP)),
-                                                  S_GET_NAME(sub_symbolP), fragP->fr_address + where);
-                                       } /* if absolute */
-                           }
-           }                   /* if sub_symbolP */
-
-       if (add_symbolP) {
-               if (add_symbol_segment == this_segment_type && pcrel) {
-                       /*
-                        * This fixup was made when the symbol's segment was
-                        * SEG_UNKNOWN, but it is now in the local segment.
-                        * So we know how to do the address without relocation.
-                        */
-#ifdef TC_I960
-                       /* reloc_callj() may replace a 'call' with a 'calls' or a 'bal',
-                        * in which cases it modifies *fixP as appropriate.  In the case
-                        * of a 'calls', no further work is required, and *fixP has been
-                        * set up to make the rest of the code below a no-op.
-                        */
-                       reloc_callj(fixP);
-#endif                         /* TC_I960 */
-                               
-                       add_number += S_GET_VALUE(add_symbolP);
-                       add_number -= md_pcrel_from (fixP);
-                       pcrel = 0; /* Lie. Don't want further pcrel processing. */
-                       fixP->fx_addsy = NULL; /* No relocations please. */
-                   } else 
-                   {
-                       switch (add_symbol_segment) 
-                       {
-                         case SEG_ABSOLUTE:
-#ifdef TC_I960
-                           reloc_callj(fixP); /* See comment about reloc_callj() above*/
-#endif                         /* TC_I960 */
-                           add_number += S_GET_VALUE(add_symbolP);
-                           fixP->fx_addsy = NULL;
-                           add_symbolP = NULL;
-                           break;
-                         default:
-
-                           add_number += S_GET_VALUE(add_symbolP) +
-               segment_info[S_GET_SEGMENT(add_symbolP)].scnhdr.s_paddr ;
-                           break;
-                                       
-                         case SEG_UNKNOWN:
-#ifdef TC_I960
-                           if ((int)fixP->fx_bit_fixP == 13) {
-                                   /* This is a COBR instruction.  They have only a
-                                    * 13-bit displacement and are only to be used
-                                    * for local branches: flag as error, don't generate
-                                    * relocation.
-                                    */
-                                   as_bad("can't use COBR format with external label");
-                                   fixP->fx_addsy = NULL; /* No relocations please. */
-                                   continue;
-                               } /* COBR */
-#endif                         /* TC_I960 */
-               
-
-
-                           break;
-                                       
-
-                       }       /* switch on symbol seg */
-                   }           /* if not in local seg */
-           }                   /* if there was a + symbol */
-
-       if (pcrel) {
-               add_number -= md_pcrel_from(fixP);
-               if (add_symbolP == 0) {
-                       fixP->fx_addsy = & abs_symbol;
-                   }           /* if there's an add_symbol */
-           }                   /* if pcrel */
-               
-       if (!fixP->fx_bit_fixP) {
-               if ((size==1 &&
-                    (add_number& ~0xFF)   && (add_number&~0xFF!=(-1&~0xFF))) ||
-                   (size==2 &&
-                    (add_number& ~0xFFFF) && (add_number&~0xFFFF!=(-1&~0xFFFF)))) {
-                       as_bad("Value of %d too large for field of %d bytes at 0x%x",
-                              add_number, size, fragP->fr_address + where);
-                   }           /* generic error checking */
-           }                   /* not a bit fix */
-       /* once this fix has been applied, we don't have to output anything 
-          nothing more need be done -*/
-       md_apply_fix(fixP, add_number);
-      
-    }                          /* For each fixS in this segment. */
-       
-
-}                              /* fixup_segment() */
-#endif
-
-
-
-
diff --git a/gas/config/obj-coff-bfd.h b/gas/config/obj-coff-bfd.h
deleted file mode 100755 (executable)
index 16393cd..0000000
+++ /dev/null
@@ -1,512 +0,0 @@
-/* coff object file format
-   Copyright (C) 1989, 1990, 1991 Free Software Foundation, Inc.
-
-This file is part of GAS.
-
-GAS is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2, or (at your option)
-any later version.
-
-GAS is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with GAS; see the file COPYING.  If not, write to
-the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-/* $Id$ */
-
-#define OBJ_COFF 1
-
-#include "targ-cpu.h"
-
-#include "bfd.h"
-
-/*extern bfd *stdoutput;*/
-/* This internal_lineno crap is to stop namespace pollution from the
-   bfd internal coff headerfile. */
-
-#define internal_lineno bfd_internal_lineno
-#include "coff/internal.h"
-#undef internal_lineno
-
-#if defined(TC_H8300)
-#include "coff/h8300.h"
-#define TARGET_FORMAT "coff-h8300"
-#elif defined(TC_A29K)
-#include "coff/a29k.h"
-#define TARGET_FORMAT "coff-a29k-big"
-#else
-help me
-#endif
-
-#if 0
-/* Define some processor dependent values according to the processor we are
-   on. */
-#if defined(TC_H8300)
-#define BYTE_ORDERING          0
-#define FILE_HEADER_MAGIC      H8300MAGIC
-#elif defined(TC_M68K)
-
-#define BYTE_ORDERING          F_AR32W    /* See filehdr.h for more info. */
-#ifndef FILE_HEADER_MAGIC
-#define FILE_HEADER_MAGIC      MC68MAGIC  /* ... */
-#endif /* FILE_HEADER_MAGIC */
-
-#elif defined(TC_I386)
-
-#define BYTE_ORDERING          F_AR32WR   /* See filehdr.h for more info. */
-#ifndef FILE_HEADER_MAGIC
-#define FILE_HEADER_MAGIC      I386MAGIC  /* ... */
-#endif /* FILE_HEADER_MAGIC */
-
-#elif defined(TC_I960)
-
-#define BYTE_ORDERING          F_AR32WR   /* See filehdr.h for more info. */
-#ifndef FILE_HEADER_MAGIC
-#define FILE_HEADER_MAGIC      I960ROMAGIC  /* ... */
-#endif /* FILE_HEADER_MAGIC */
-
-#elif defined(TC_A29K)
-
-#define BYTE_ORDERING          F_AR32W /* big endian. */
-#ifndef FILE_HEADER_MAGIC
-#define FILE_HEADER_MAGIC      SIPFBOMAGIC
-#endif /* FILE_HEADER_MAGIC */
-
-#else
-you lose
-#endif 
-
-#endif
-
-#ifndef OBJ_COFF_MAX_AUXENTRIES
-#define OBJ_COFF_MAX_AUXENTRIES 1
-#endif /* OBJ_COFF_MAX_AUXENTRIES */
-
-
-extern const segT  N_TYPE_seg[];
-
-/* Magic number of paged executable. */
-#define DEFAULT_MAGIC_NUMBER_FOR_OBJECT_FILE   0x8300
-
-
-/* SYMBOL TABLE */
-
- /* targets may also set this */
-#ifndef SYMBOLS_NEED_BACKPOINTERS
-#define SYMBOLS_NEED_BACKPOINTERS 1
-#endif /* SYMBOLS_NEED_BACKPOINTERS */
-
-/* Symbol table entry data type */
-
-typedef struct 
-{
-  struct internal_syment  ost_entry; /* Basic symbol */
-  union internal_auxent ost_auxent[OBJ_COFF_MAX_AUXENTRIES]; /* Auxiliary entry. */
-
-  unsigned int ost_flags; /* obj_coff internal use only flags */
-} obj_symbol_type;
-
-#define DO_NOT_STRIP   0
-#define DO_STRIP       1
-
-/* Symbol table macros and constants */
-
-/* Possible and usefull section number in symbol table 
- * The values of TEXT, DATA and BSS may not be portable.
- */
-
-#define C_ABS_SECTION          N_ABS
-#define C_UNDEF_SECTION                N_UNDEF
-#define C_DEBUG_SECTION                N_DEBUG
-#define C_NTV_SECTION          N_TV
-#define C_PTV_SECTION          P_TV
-#define C_REGISTER_SECTION     20
-
-/*
- *  Macros to extract information from a symbol table entry.
- *  This syntaxic indirection allows independence regarding a.out or coff.
- *  The argument (s) of all these macros is a pointer to a symbol table entry.
- */
-
-/* Predicates */
-/* True if the symbol is external */
-#define S_IS_EXTERNAL(s)        ((s)->sy_symbol.ost_entry.n_scnum == C_UNDEF_SECTION)
-/* True if symbol has been defined, ie :
-  section > 0 (DATA, TEXT or BSS)
-  section == 0 and value > 0 (external bss symbol) */
-#define S_IS_DEFINED(s)         ((s)->sy_symbol.ost_entry.n_scnum > C_UNDEF_SECTION || \
-                                ((s)->sy_symbol.ost_entry.n_scnum == C_UNDEF_SECTION && \
-                                 (s)->sy_symbol.ost_entry.n_value > 0))
-/* True if a debug special symbol entry */
-#define S_IS_DEBUG(s)          ((s)->sy_symbol.ost_entry.n_scnum == C_DEBUG_SECTION)
-/* True if a symbol is local symbol name */
-/* A symbol name whose name begin with ^A is a gas internal pseudo symbol */
-#define S_IS_LOCAL(s)          (S_GET_NAME(s)[0] == '\001' || \
-                                (s)->sy_symbol.ost_entry.n_scnum == C_REGISTER_SECTION || \
-                                (S_LOCAL_NAME(s) && !flagseen['L']))
-/* True if a symbol is not defined in this file */
-#define S_IS_EXTERN(s)         ((s)->sy_symbol.ost_entry.n_scnum == 0 && (s)->sy_symbol.ost_entry.n_value == 0)
-/*
- * True if a symbol can be multiply defined (bss symbols have this def
- * though it is bad practice)
- */
-#define S_IS_COMMON(s)         ((s)->sy_symbol.ost_entry.n_scnum == 0 && (s)->sy_symbol.ost_entry.n_value != 0)
-/* True if a symbol name is in the string table, i.e. its length is > 8. */
-#define S_IS_STRING(s)         (strlen(S_GET_NAME(s)) > 8 ? 1 : 0)
-
-/* Accessors */
-/* The name of the symbol */
-#define S_GET_NAME(s)          ((char*)(s)->sy_symbol.ost_entry.n_offset)
-/* The pointer to the string table */
-#define S_GET_OFFSET(s)         ((s)->sy_symbol.ost_entry.n_offset)
-/* The zeroes if symbol name is longer than 8 chars */
-#define S_GET_ZEROES(s)                ((s)->sy_symbol.ost_entry.n_zeroes)
-/* The value of the symbol */
-#define S_GET_VALUE(s)         ((unsigned) ((s)->sy_symbol.ost_entry.n_value)) 
-/* The numeric value of the segment */
-#define S_GET_SEGMENT(s)   s_get_segment(s)
-/* The data type */
-#define S_GET_DATA_TYPE(s)     ((s)->sy_symbol.ost_entry.n_type)
-/* The storage class */
-#define S_GET_STORAGE_CLASS(s) ((s)->sy_symbol.ost_entry.n_sclass)
-/* The number of auxiliary entries */
-#define S_GET_NUMBER_AUXILIARY(s)      ((s)->sy_symbol.ost_entry.n_numaux)
-
-/* Modifiers */
-/* Set the name of the symbol */
-#define S_SET_NAME(s,v)                ((s)->sy_symbol.ost_entry.n_offset = (unsigned long)(v))
-/* Set the offset of the symbol */
-#define S_SET_OFFSET(s,v)      ((s)->sy_symbol.ost_entry.n_offset = (v))
-/* The zeroes if symbol name is longer than 8 chars */
-#define S_SET_ZEROES(s,v)              ((s)->sy_symbol.ost_entry.n_zeroes = (v))
-/* Set the value of the symbol */
-#define S_SET_VALUE(s,v)       ((s)->sy_symbol.ost_entry.n_value = (v))
-/* The numeric value of the segment */
-#define S_SET_SEGMENT(s,v)     ((s)->sy_symbol.ost_entry.n_scnum = SEGMENT_TO_SYMBOL_TYPE(v))
-/* The data type */
-#define S_SET_DATA_TYPE(s,v)   ((s)->sy_symbol.ost_entry.n_type = (v))
-/* The storage class */
-#define S_SET_STORAGE_CLASS(s,v)       ((s)->sy_symbol.ost_entry.n_sclass = (v))
-/* The number of auxiliary entries */
-#define S_SET_NUMBER_AUXILIARY(s,v)    ((s)->sy_symbol.ost_entry.n_numaux = (v))
-
-/* Additional modifiers */
-/* The symbol is external (does not mean undefined) */
-#define S_SET_EXTERNAL(s)       { S_SET_STORAGE_CLASS(s, C_EXT) ; SF_CLEAR_LOCAL(s); }
-
-/* Auxiliary entry macros. SA_ stands for symbol auxiliary */
-/* Omit the tv related fields */
-/* Accessors */
-#ifdef BFD_HEADERS
-#define SA_GET_SYM_TAGNDX(s)   ((s)->sy_symbol.ost_auxent[0].x_sym.x_tagndx.l)
-#else
-#define SA_GET_SYM_TAGNDX(s)   ((s)->sy_symbol.ost_auxent[0].x_sym.x_tagndx)
-#endif
-#define SA_GET_SYM_LNNO(s)     ((s)->sy_symbol.ost_auxent[0].x_sym.x_misc.x_lnsz.x_lnno)
-#define SA_GET_SYM_SIZE(s)     ((s)->sy_symbol.ost_auxent[0].x_sym.x_misc.x_lnsz.x_size)
-#define SA_GET_SYM_FSIZE(s)    ((s)->sy_symbol.ost_auxent[0].x_sym.x_misc.x_fsize)
-#define SA_GET_SYM_LNNOPTR(s)  ((s)->sy_symbol.ost_auxent[0].x_sym.x_fcnary.x_fcn.x_lnnoptr)
-#ifdef BFD_HEADERS
-#define SA_GET_SYM_ENDNDX(s)   ((s)->sy_symbol.ost_auxent[0].x_sym.x_fcnary.x_fcn.x_endndx.l)
-#else
-#define SA_GET_SYM_ENDNDX(s)   ((s)->sy_symbol.ost_auxent[0].x_sym.x_fcnary.x_fcn.x_endndx)
-#endif
-#define SA_GET_SYM_DIMEN(s,i)  ((s)->sy_symbol.ost_auxent[0].x_sym.x_fcnary.x_ary.x_dimen[(i)])
-#define SA_GET_FILE_FNAME(s)   ((s)->sy_symbol.ost_auxent[0].x_file.x_fname)
-#define SA_GET_SCN_SCNLEN(s)   ((s)->sy_symbol.ost_auxent[0].x_scn.x_scnlen)
-#define SA_GET_SCN_NRELOC(s)   ((s)->sy_symbol.ost_auxent[0].x_scn.x_nreloc)
-#define SA_GET_SCN_NLINNO(s)   ((s)->sy_symbol.ost_auxent[0].x_scn.x_nlinno)
-
-/* Modifiers */
-#ifdef BFD_HEADERS
-#define SA_SET_SYM_TAGNDX(s,v) ((s)->sy_symbol.ost_auxent[0].x_sym.x_tagndx.l=(v))
-#else
-#define SA_SET_SYM_TAGNDX(s,v) ((s)->sy_symbol.ost_auxent[0].x_sym.x_tagndx=(v))
-#endif
-#define SA_SET_SYM_LNNO(s,v)   ((s)->sy_symbol.ost_auxent[0].x_sym.x_misc.x_lnsz.x_lnno=(v))
-#define SA_SET_SYM_SIZE(s,v)   ((s)->sy_symbol.ost_auxent[0].x_sym.x_misc.x_lnsz.x_size=(v))
-#define SA_SET_SYM_FSIZE(s,v)  ((s)->sy_symbol.ost_auxent[0].x_sym.x_misc.x_fsize=(v))
-#define SA_SET_SYM_LNNOPTR(s,v)        ((s)->sy_symbol.ost_auxent[0].x_sym.x_fcnary.x_fcn.x_lnnoptr=(v))
-#ifdef BFD_HEADERS
-#define SA_SET_SYM_ENDNDX(s,v) ((s)->sy_symbol.ost_auxent[0].x_sym.x_fcnary.x_fcn.x_endndx.l=(v))
-#else
-#define SA_SET_SYM_ENDNDX(s,v) ((s)->sy_symbol.ost_auxent[0].x_sym.x_fcnary.x_fcn.x_endndx=(v))
-#endif
-#define SA_SET_SYM_DIMEN(s,i,v)        ((s)->sy_symbol.ost_auxent[0].x_sym.x_fcnary.x_ary.x_dimen[(i)]=(v))
-#define SA_SET_FILE_FNAME(s,v) strncpy((s)->sy_symbol.ost_auxent[0].x_file.x_fname,(v),FILNMLEN)
-#define SA_SET_SCN_SCNLEN(s,v) ((s)->sy_symbol.ost_auxent[0].x_scn.x_scnlen=(v))
-#define SA_SET_SCN_NRELOC(s,v) ((s)->sy_symbol.ost_auxent[0].x_scn.x_nreloc=(v))
-#define SA_SET_SCN_NLINNO(s,v) ((s)->sy_symbol.ost_auxent[0].x_scn.x_nlinno=(v))
-
-/*
- * Internal use only definitions. SF_ stands for symbol flags.
- *
- * These values can be assigned to sy_symbol.ost_flags field of a symbolS.
- *
- * You'll break i960 if you shift the SYSPROC bits anywhere else.  for
- * more on the balname/callname hack, see tc-i960.h.  b.out is done
- * differently.
- */
-
-#define SF_I960_MASK   (0x000001ff) /* Bits 0-8 are used by the i960 port. */
-#define SF_SYSPROC     (0x0000003f)         /* bits 0-5 are used to store the sysproc number */
-#define SF_IS_SYSPROC  (0x00000040)         /* bit 6 marks symbols that are sysprocs */
-#define SF_BALNAME     (0x00000080)         /* bit 7 marks BALNAME symbols */
-#define SF_CALLNAME    (0x00000100)         /* bit 8 marks CALLNAME symbols */
-
-#define SF_NORMAL_MASK (0x0000ffff) /* bits 12-15 are general purpose. */
-
-#define SF_STATICS     (0x00001000)         /* Mark the .text & all symbols */
-#define SF_DEFINED     (0x00002000)         /* Symbol is defined in this file */
-#define SF_STRING      (0x00004000)         /* Symbol name length > 8 */
-#define SF_LOCAL       (0x00008000)         /* Symbol must not be emitted */
-
-#define SF_DEBUG_MASK  (0xffff0000) /* bits 16-31 are debug info */
-
-#define SF_FUNCTION    (0x00010000)         /* The symbol is a function */
-#define SF_PROCESS     (0x00020000)         /* Process symbol before write */
-#define SF_TAGGED      (0x00040000)         /* Is associated with a tag */
-#define SF_TAG         (0x00080000)         /* Is a tag */
-#define SF_DEBUG       (0x00100000)         /* Is in debug or abs section */
-#define SF_GET_SEGMENT (0x00200000)         /* Get the section of the forward symbol. */
- /* All other bits are unused. */
-
-/* Accessors */
-#define SF_GET(s)              ((s)->sy_symbol.ost_flags)
-#define SF_GET_NORMAL_FIELD(s) ((s)->sy_symbol.ost_flags & SF_NORMAL_MASK)
-#define SF_GET_DEBUG_FIELD(s)  ((s)->sy_symbol.ost_flags & SF_DEBUG_MASK)
-#define SF_GET_FILE(s)         ((s)->sy_symbol.ost_flags & SF_FILE)
-#define SF_GET_STATICS(s)      ((s)->sy_symbol.ost_flags & SF_STATICS)
-#define SF_GET_DEFINED(s)      ((s)->sy_symbol.ost_flags & SF_DEFINED)
-#define SF_GET_STRING(s)       ((s)->sy_symbol.ost_flags & SF_STRING)
-#define SF_GET_LOCAL(s)                ((s)->sy_symbol.ost_flags & SF_LOCAL)
-#define SF_GET_FUNCTION(s)      ((s)->sy_symbol.ost_flags & SF_FUNCTION)
-#define SF_GET_PROCESS(s)      ((s)->sy_symbol.ost_flags & SF_PROCESS)
-#define SF_GET_DEBUG(s)                ((s)->sy_symbol.ost_flags & SF_DEBUG)
-#define SF_GET_TAGGED(s)       ((s)->sy_symbol.ost_flags & SF_TAGGED)
-#define SF_GET_TAG(s)          ((s)->sy_symbol.ost_flags & SF_TAG)
-#define SF_GET_GET_SEGMENT(s)  ((s)->sy_symbol.ost_flags & SF_GET_SEGMENT)
-#define SF_GET_I960(s)         ((s)->sy_symbol.ost_flags & SF_I960_MASK) /* used by i960 */
-#define SF_GET_BALNAME(s)      ((s)->sy_symbol.ost_flags & SF_BALNAME) /* used by i960 */
-#define SF_GET_CALLNAME(s)     ((s)->sy_symbol.ost_flags & SF_CALLNAME) /* used by i960 */
-#define SF_GET_IS_SYSPROC(s)   ((s)->sy_symbol.ost_flags & SF_IS_SYSPROC) /* used by i960 */
-#define SF_GET_SYSPROC(s)      ((s)->sy_symbol.ost_flags & SF_SYSPROC) /* used by i960 */
-
-/* Modifiers */
-#define SF_SET(s,v)            ((s)->sy_symbol.ost_flags = (v))
-#define SF_SET_NORMAL_FIELD(s,v)((s)->sy_symbol.ost_flags |= ((v) & SF_NORMAL_MASK))
-#define SF_SET_DEBUG_FIELD(s,v)        ((s)->sy_symbol.ost_flags |= ((v) & SF_DEBUG_MASK))
-#define SF_SET_FILE(s)         ((s)->sy_symbol.ost_flags |= SF_FILE)
-#define SF_SET_STATICS(s)      ((s)->sy_symbol.ost_flags |= SF_STATICS)
-#define SF_SET_DEFINED(s)      ((s)->sy_symbol.ost_flags |= SF_DEFINED)
-#define SF_SET_STRING(s)       ((s)->sy_symbol.ost_flags |= SF_STRING)
-#define SF_SET_LOCAL(s)                ((s)->sy_symbol.ost_flags |= SF_LOCAL)
-#define SF_CLEAR_LOCAL(s)      ((s)->sy_symbol.ost_flags &= ~SF_LOCAL)
-#define SF_SET_FUNCTION(s)      ((s)->sy_symbol.ost_flags |= SF_FUNCTION)
-#define SF_SET_PROCESS(s)      ((s)->sy_symbol.ost_flags |= SF_PROCESS)
-#define SF_SET_DEBUG(s)                ((s)->sy_symbol.ost_flags |= SF_DEBUG)
-#define SF_SET_TAGGED(s)       ((s)->sy_symbol.ost_flags |= SF_TAGGED)
-#define SF_SET_TAG(s)          ((s)->sy_symbol.ost_flags |= SF_TAG)
-#define SF_SET_GET_SEGMENT(s)  ((s)->sy_symbol.ost_flags |= SF_GET_SEGMENT)
-#define SF_SET_I960(s,v)       ((s)->sy_symbol.ost_flags |= ((v) & SF_I960_MASK)) /* used by i960 */
-#define SF_SET_BALNAME(s)      ((s)->sy_symbol.ost_flags |= SF_BALNAME) /* used by i960 */
-#define SF_SET_CALLNAME(s)     ((s)->sy_symbol.ost_flags |= SF_CALLNAME) /* used by i960 */
-#define SF_SET_IS_SYSPROC(s)   ((s)->sy_symbol.ost_flags |= SF_IS_SYSPROC) /* used by i960 */
-#define SF_SET_SYSPROC(s,v)    ((s)->sy_symbol.ost_flags |= ((v) & SF_SYSPROC)) /* used by i960 */
-
-/* File header macro and type definition */
-
-/*
- * File position calculators. Beware to use them when all the
- * appropriate fields are set in the header.
- */
-
-#ifdef OBJ_COFF_OMIT_OPTIONAL_HEADER
-#define OBJ_COFF_AOUTHDRSZ (0)
-#else
-#define OBJ_COFF_AOUTHDRSZ (AOUTHDRSZ)
-#endif /* OBJ_COFF_OMIT_OPTIONAL_HEADER */
-
-#define H_GET_FILE_SIZE(h) \
-    (long)(FILHSZ + OBJ_COFF_AOUTHDRSZ + \
-          H_GET_NUMBER_OF_SECTIONS(h) * SCNHSZ + \
-          H_GET_TEXT_SIZE(h) + H_GET_DATA_SIZE(h) + \
-          H_GET_RELOCATION_SIZE(h) + H_GET_LINENO_SIZE(h) + \
-          H_GET_SYMBOL_TABLE_SIZE(h) + \
-          (h)->string_table_size)
-#define H_GET_TEXT_FILE_OFFSET(h) \
-    (long)(FILHSZ + OBJ_COFF_AOUTHDRSZ + \
-          H_GET_NUMBER_OF_SECTIONS(h) * SCNHSZ)
-#define H_GET_DATA_FILE_OFFSET(h) \
-    (long)(FILHSZ + OBJ_COFF_AOUTHDRSZ + \
-          H_GET_NUMBER_OF_SECTIONS(h) * SCNHSZ + \
-          H_GET_TEXT_SIZE(h))
-#define H_GET_BSS_FILE_OFFSET(h) 0
-#define H_GET_RELOCATION_FILE_OFFSET(h) \
-    (long)(FILHSZ + OBJ_COFF_AOUTHDRSZ + \
-          H_GET_NUMBER_OF_SECTIONS(h) * SCNHSZ + \
-          H_GET_TEXT_SIZE(h) + H_GET_DATA_SIZE(h))
-#define H_GET_LINENO_FILE_OFFSET(h) \
-    (long)(FILHSZ + OBJ_COFF_AOUTHDRSZ + \
-          H_GET_NUMBER_OF_SECTIONS(h) * SCNHSZ + \
-          H_GET_TEXT_SIZE(h) + H_GET_DATA_SIZE(h) + \
-          H_GET_RELOCATION_SIZE(h))
-#define H_GET_SYMBOL_TABLE_FILE_OFFSET(h) \
-    (long)(FILHSZ + OBJ_COFF_AOUTHDRSZ + \
-          H_GET_NUMBER_OF_SECTIONS(h) * SCNHSZ + \
-          H_GET_TEXT_SIZE(h) + H_GET_DATA_SIZE(h) + \
-          H_GET_RELOCATION_SIZE(h) + H_GET_LINENO_SIZE(h))
-
-/* Accessors */
-/* aouthdr */
-#define H_GET_MAGIC_NUMBER(h)           ((h)->aouthdr.magic)
-#define H_GET_VERSION_STAMP(h)         ((h)->aouthdr.vstamp)
-#define H_GET_TEXT_SIZE(h)              ((h)->aouthdr.tsize)
-#define H_GET_DATA_SIZE(h)              ((h)->aouthdr.dsize)
-#define H_GET_BSS_SIZE(h)               ((h)->aouthdr.bsize)
-#define H_GET_ENTRY_POINT(h)            ((h)->aouthdr.entry)
-#define H_GET_TEXT_START(h)            ((h)->aouthdr.text_start)
-#define H_GET_DATA_START(h)            ((h)->aouthdr.data_start)
-/* filehdr */
-#define H_GET_FILE_MAGIC_NUMBER(h)     ((h)->filehdr.f_magic)
-#define H_GET_NUMBER_OF_SECTIONS(h)    ((h)->filehdr.f_nscns)
-#define H_GET_TIME_STAMP(h)            ((h)->filehdr.f_timdat)
-#define H_GET_SYMBOL_TABLE_POINTER(h)  ((h)->filehdr.f_symptr)
-#define H_GET_SYMBOL_COUNT(h)          ((h)->filehdr.f_nsyms)
-#define H_GET_SYMBOL_TABLE_SIZE(h)     (H_GET_SYMBOL_COUNT(h) * SYMESZ)
-#define H_GET_SIZEOF_OPTIONAL_HEADER(h)        ((h)->filehdr.f_opthdr)
-#define H_GET_FLAGS(h)                 ((h)->filehdr.f_flags)
-/* Extra fields to achieve bsd a.out compatibility and for convenience */
-#define H_GET_RELOCATION_SIZE(h)       ((h)->relocation_size)
-#define H_GET_STRING_SIZE(h)            ((h)->string_table_size)
-#define H_GET_LINENO_SIZE(h)            ((h)->lineno_size)
-
-#ifndef OBJ_COFF_OMIT_OPTIONAL_HEADER
-#define H_GET_HEADER_SIZE(h)           (sizeof(FILHDR) \
-                                        + sizeof(AOUTHDR)\
-                                        + (H_GET_NUMBER_OF_SECTIONS(h) * SCNHSZ))
-#else /* OBJ_COFF_OMIT_OPTIONAL_HEADER */
-#define H_GET_HEADER_SIZE(h)           (sizeof(FILHDR) \
-                                        + (H_GET_NUMBER_OF_SECTIONS(h) * SCNHSZ))
-#endif /* OBJ_COFF_OMIT_OPTIONAL_HEADER */
-
-#define H_GET_TEXT_RELOCATION_SIZE(h)  (text_section_header.s_nreloc * RELSZ)
-#define H_GET_DATA_RELOCATION_SIZE(h)  (data_section_header.s_nreloc * RELSZ)
-
-/* Modifiers */
-/* aouthdr */
-#define H_SET_MAGIC_NUMBER(h,v)         ((h)->aouthdr.magic = (v))
-#define H_SET_VERSION_STAMP(h,v)       ((h)->aouthdr.vstamp = (v))
-#define H_SET_TEXT_SIZE(h,v)            ((h)->aouthdr.tsize = (v))
-#define H_SET_DATA_SIZE(h,v)            ((h)->aouthdr.dsize = (v))
-#define H_SET_BSS_SIZE(h,v)             ((h)->aouthdr.bsize = (v))
-#define H_SET_ENTRY_POINT(h,v)          ((h)->aouthdr.entry = (v))
-#define H_SET_TEXT_START(h,v)          ((h)->aouthdr.text_start = (v))
-#define H_SET_DATA_START(h,v)          ((h)->aouthdr.data_start = (v))
-/* filehdr */
-#define H_SET_FILE_MAGIC_NUMBER(h,v)   ((h)->filehdr.f_magic = (v))
-#define H_SET_NUMBER_OF_SECTIONS(h,v)  ((h)->filehdr.f_nscns = (v))
-#define H_SET_TIME_STAMP(h,v)          ((h)->filehdr.f_timdat = (v))
-#define H_SET_SYMBOL_TABLE_POINTER(h,v)        ((h)->filehdr.f_symptr = (v))
-#define H_SET_SYMBOL_TABLE_SIZE(h,v)    ((h)->filehdr.f_nsyms = (v))
-#define H_SET_SIZEOF_OPTIONAL_HEADER(h,v) ((h)->filehdr.f_opthdr = (v))
-#define H_SET_FLAGS(h,v)               ((h)->filehdr.f_flags = (v))
-/* Extra fields to achieve bsd a.out compatibility and for convinience */
-#define H_SET_RELOCATION_SIZE(h,t,d)   ((h)->relocation_size = (t)+(d))
-#define H_SET_STRING_SIZE(h,v)          ((h)->string_table_size = (v))
-#define H_SET_LINENO_SIZE(h,v)          ((h)->lineno_size = (v))
-
- /* Segment flipping */
-#define segment_name(v)        (seg_name[(int) (v)])
-
-typedef struct {
-#ifdef BFD_HEADERS
-    struct internal_aouthdr       aouthdr;             /* a.out header */
-    struct internal_filehdr       filehdr;             /* File header, not machine dep. */
-#else
-    AOUTHDR       aouthdr;             /* a.out header */
-    FILHDR        filehdr;             /* File header, not machine dep. */
-#endif
-    long       string_table_size;   /* names + '\0' + sizeof(int) */
-    long          relocation_size;     /* Cumulated size of relocation
-                                          information for all sections in
-                                          bytes. */
-    long          lineno_size;         /* Size of the line number information
-                                          table in bytes */
-} object_headers;
-
-
-
-struct lineno_list
-{
-  
-  struct bfd_internal_lineno line;
-  char* frag;                  /* Frag to which the line number is related */
-  struct lineno_list* next;    /* Forward chain pointer */
-} ;
-
-
-
-
- /* stack stuff */
-typedef struct {
-    unsigned long chunk_size;
-    unsigned long element_size;
-    unsigned long size;
-    char*        data;
-    unsigned long pointer;
-} stack;
-
-
-
-char *EXFUN(stack_pop,(stack *st));
-char *EXFUN(stack_push,(stack *st, char *element));
-char *EXFUN(stack_top,(stack *st));
-stack *EXFUN(stack_init,(unsigned long chunk_size, unsigned long element_size));
-void EXFUN(c_dot_file_symbol,(char *filename));
-void EXFUN(obj_extra_stuff,(object_headers *headers));
-void EXFUN(stack_delete,(stack *st));
-
-
-
-void EXFUN(c_section_header,(
-
-                     struct internal_scnhdr *header,
-                     char *name,
-                     long core_address,
-                     long size,
-                     long data_ptr,
-                     long reloc_ptr,
-                     long lineno_ptr,
-                     long reloc_number,
-                     long lineno_number,
-                     long alignment));
-
-
- /* sanity check */
-
-#ifdef TC_I960
-#ifndef C_LEAFSTAT
-hey!  Where is the C_LEAFSTAT definition?  i960-coff support is depending on it.
-#endif /* no C_LEAFSTAT */
-#endif /* TC_I960 */
-#ifdef BFD_HEADERS
-extern struct internal_scnhdr data_section_header;
-extern struct internal_scnhdr text_section_header;
-#else
-extern SCNHDR data_section_header;
-extern SCNHDR text_section_header;
-#endif
-/*
- * Local Variables:
- * comment-column: 0
- * fill-column: 131
- * End:
- */
-
-/* end of obj-coff.h */
diff --git a/gas/config/ranlib.h b/gas/config/ranlib.h
deleted file mode 100755 (executable)
index d7fda45..0000000
+++ /dev/null
@@ -1,36 +0,0 @@
-/* This file is ranlib.h
-   Copyright (C) 1987-1992 Free Software Foundation, Inc.
-   
-   This file is part of GAS, the GNU Assembler.
-   
-   GAS is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
-   any later version.
-   
-   GAS is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-   
-   You should have received a copy of the GNU General Public License
-   along with GAS; see the file COPYING.  If not, write to
-   the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-/*
- * Structure of the __.SYMDEF table of contents for an archive.
- * __.SYMDEF begins with a word giving the number of ranlib structures
- * which immediately follow, and then continues with a string
- * table consisting of a word giving the number of bytes of strings
- * which follow and then the strings themselves.
- * The ran_strx fields index the string table whose first byte is numbered 0.
- */
-struct ranlib {
-       union {
-               off_t   ran_strx;       /* string table index of */
-               char    *ran_name;      /* symbol defined by */
-       } ran_un;
-       off_t   ran_off;                /* library member at this offset */
-};
-
-/* end of ranlib.h */
diff --git a/gas/config/signame.h b/gas/config/signame.h
deleted file mode 100755 (executable)
index 8eb0889..0000000
+++ /dev/null
@@ -1,43 +0,0 @@
-/* Convert between signal names and numbers.
-   Copyright (C) 1990, 1992 Free Software Foundation, Inc.
-   
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
-   any later version.
-   
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-   
-   You should have received a copy of the GNU General Public License
-   along with this program; see the file COPYING.  If not, write to
-   the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-/* Names for signals from 0 to NSIG-1.  */
-extern char *sys_siglist[];
-
-#if __STDC__ == 1
-/* Return the abbreviation (e.g. ABRT, FPE, etc.) for signal NUMBER.
-   Do not return this as a const char *.  The caller might want to
-   assign it to a char *.  */
-char *sig_abbrev (int number);
-
-/* Return the signal number for an ABBREV, or -1 if there is no
-   signal by that name.  */
-int sig_number (const char *abbrev);
-
-/* Print to standard error the name of SIGNAL, preceded by MESSAGE and
-   a colon, and followed by a newline.  */
-void psignal (int signal, const char *message);
-
-#else /* not __STDC__ */
-
-char *sig_abbrev ();
-int sig_number ();
-void psignal ();
-
-#endif /* not __STDC__ */
-
-/* end of signame.h */
diff --git a/gas/config/stab.h b/gas/config/stab.h
deleted file mode 100755 (executable)
index efeee1e..0000000
+++ /dev/null
@@ -1,37 +0,0 @@
-/* This file is stab.h
-   Copyright (C) 1987-1992 Free Software Foundation, Inc.
-   
-   This file is part of GAS, the GNU Assembler.
-   
-   GAS is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
-   any later version.
-   
-   GAS is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-   
-   You should have received a copy of the GNU General Public License
-   along with GAS; see the file COPYING.  If not, write to
-   the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-#ifndef __GNU_STAB__
-
-/* Indicate the GNU stab.h is in use.  */
-
-#define __GNU_STAB__
-
-#define __define_stab(NAME, CODE, STRING) NAME=CODE,
-    
-    enum __stab_debug_code
-{
-#include "stab.def"
-};
-
-#undef __define_stab
-
-#endif /* __GNU_STAB_ */
-
-/* end of stab.h */
diff --git a/gas/config/tc-m68kmote.c b/gas/config/tc-m68kmote.c
deleted file mode 100644 (file)
index d8e93b0..0000000
+++ /dev/null
@@ -1,4519 +0,0 @@
-/* tc-m68kmote.c  All the m68020 specific stuff in one convenient, huge,
-   slow to compile, easy to find file.
-   Copyright (C) 1987, 1991, 1992 Free Software Foundation, Inc.
-   
-   This file is part of GAS, the GNU Assembler.
-   
-   GAS is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
-   any later version.
-   
-   GAS is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-   
-   You should have received a copy of the GNU General Public License
-   along with GAS; see the file COPYING.  If not, write to
-   the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-#define MRI 
-#include <ctype.h>
-
-#include "as.h"
-#include "bfd.h"
-#include "obstack.h"
-
-/* note that this file includes real declarations and thus can only be included by one source file per executable. */
-#include "opcode/m68k.h"
-#ifdef TE_SUN
-/* This variable contains the value to write out at the beginning of
-   the a.out file.  The 2<<16 means that this is a 68020 file instead
-   of an old-style 68000 file */
-
-long omagic = 2<<16|OMAGIC;    /* Magic byte for header file */
-#else
-long omagic = OMAGIC;
-#endif
-
-/* This array holds the chars that always start a comment.  If the
-   pre-processor is disabled, these aren't very useful */
-const char comment_chars[] = "|";
-
-/* This array holds the chars that only start a comment at the beginning of
-   a line.  If the line seems to have the form '# 123 filename'
-   .line and .file directives will appear in the pre-processed output */
-/* Note that input_file.c hand checks for '#' at the beginning of the
-   first line of the input file.  This is because the compiler outputs
-   #NO_APP at the beginning of its output. */
-/* Also note that comments like this one will always work. */
-#ifdef MRI
-const char line_comment_chars[] = "*";
-#else
-const char line_comment_chars[] = "#";
-#endif
-
-#define NO_RELOC 0
-
-/* Chars that can be used to separate mant from exp in floating point nums */
-const char EXP_CHARS[] = "eE";
-
-/* Chars that mean this number is a floating point constant */
-/* As in 0f12.456 */
-/* or    0d1.2345e12 */
-
-const char FLT_CHARS[] = "rRsSfFdDxXeEpP";
-
-/* Also be aware that MAXIMUM_NUMBER_OF_CHARS_FOR_FLOAT may have to be
-   changed in read.c .  Ideally it shouldn't have to know about it at all,
-   but nothing is ideal around here.
-   */
-
-int md_reloc_size = 8;         /* Size of relocation record */
-
-/* Its an arbitrary name:  This means I don't approve of it */
-/* See flames below */
-static struct obstack robyn;
-
-#define TAB(x,y)       (((x)<<2)+(y))
-#define TABTYPE(xy)     ((xy) >> 2)
-#define BYTE           0
-#define SHORT          1
-#define LONG           2
-#define SZ_UNDEF       3
-
-#define BRANCH         1
-#define FBRANCH                2
-#define PCREL          3
-#define BCC68000        4
-#define DBCC            5
-#define PCLEA          6
-
-/* Operands we can parse:  (And associated modes)
-   
-   numb:       8 bit num
-   numw:       16 bit num
-   numl:       32 bit num
-   dreg:       data reg 0-7
-   reg:        address or data register
-   areg:       address register
-   apc:        address register, PC, ZPC or empty string
-   num:        16 or 32 bit num
-   num2:       like num
-   sz: w or l          if omitted, l assumed
-   scale:      1 2 4 or 8      if omitted, 1 assumed
-   
-   7.4 IMMED #num                              --> NUM
-   0.? DREG  dreg                              --> dreg
-   1.? AREG  areg                              --> areg
-   2.? AINDR areg@                             --> *(areg)
-   3.? AINC  areg@+                    --> *(areg++)
-   4.? ADEC  areg@-                    --> *(--areg)
-   5.? AOFF  apc@(numw)                        --> *(apc+numw) -- empty string and ZPC not allowed here
-   6.? AINDX apc@(num,reg:sz:scale)    --> *(apc+num+reg*scale)
-   6.? AINDX apc@(reg:sz:scale)                --> same, with num=0
-   6.? APODX apc@(num)@(num2,reg:sz:scale)     --> *(*(apc+num)+num2+reg*scale)
-   6.? APODX apc@(num)@(reg:sz:scale)  --> same, with num2=0
-   6.? AMIND apc@(num)@(num2)          --> *(*(apc+num)+num2) (previous mode without an index reg)
-   6.? APRDX apc@(num,reg:sz:scale)@(num2)     --> *(*(apc+num+reg*scale)+num2)
-   6.? APRDX apc@(reg:sz:scale)@(num2) --> same, with num=0
-   7.0 ABSL  num:sz                    --> *(num)
-   num                         --> *(num) (sz L assumed)
-   *** MSCR  otherreg                  --> Magic
-   With -l option
-   5.? AOFF  apc@(num)                 --> *(apc+num) -- empty string and ZPC not allowed here still
-   ?.? DINDR dreg@                     --> (dreg) -- cas2 only
-   
-   examples:
-   #foo        #0x35   #12
-   d2
-   a4
-   a3@
-   a5@+
-   a6@-
-   a2@(12)     pc@(14)
-   a1@(5,d2:w:1)       @(45,d6:l:4)
-   pc@(a2)             @(d4)
-   etc . . .
-   
-   
-   #name@(numw)        -->turn into PC rel mode
-   apc@(num8,reg:sz:scale)             --> *(apc+num8+reg*scale)
-   
-   */
-
-enum operand_type {
-       IMMED = 1,
-       DREG,
-       AREG,
-       AINDR,
-       ADEC,
-       AINC,
-       AOFF,
-       AINDX,
-       APODX,
-       AMIND,
-       APRDX,
-       ABSL,
-       MSCR,
-       REGLST,
-       DINDR
-};
-
-
-struct m68k_exp {
-       char    *e_beg;
-       char    *e_end;
-       expressionS e_exp;
-       short   e_siz;          /* 0== default 1==short/byte 2==word 3==long */
-};
-
-/* DATA and ADDR have to be contiguous, so that reg-DATA gives 0-7==data reg,
-   8-15==addr reg for operands that take both types */
-
-enum _register {
-       DATA = 1,               /*   1- 8 == data registers 0-7 */
-       DATA0 = DATA,
-       DATA1,
-       DATA2,
-       DATA3,
-       DATA4,
-       DATA5,
-       DATA6,
-       DATA7,
-       
-       ADDR,
-       ADDR0 = ADDR,
-       ADDR1,
-       ADDR2,
-       ADDR3,
-       ADDR4,
-       ADDR5,
-       ADDR6,
-       ADDR7,
-       
-       /* Note that COPNUM==processor #1 -- COPNUM+7==#8, which stores as 000 */
-       /* I think. . .  */
-       
-       SP = ADDR7,
-       
-       FPREG, /* Eight FP registers */
-       FP0 = FPREG,
-       FP1,
-       FP2,
-       FP3,
-       FP4,
-       FP5,
-       FP6,
-       FP7,
-       COPNUM = (FPREG+8),     /* Co-processor #1-#8 */
-       COP0 = COPNUM,
-       COP1,
-       COP2,
-       COP3,
-       COP4,
-       COP5,
-       COP6,
-       COP7,
-       PC,     /* Program counter */
-       ZPC, /* Hack for Program space, but 0 addressing */
-       SR,     /* Status Reg */
-       CCR, /* Condition code Reg */
-       
-       /* These have to be in order for the movec instruction to work. */
-       USP,    /*  User Stack Pointer */
-       ISP,    /*  Interrupt stack pointer */
-       SFC,
-       DFC,
-       CACR,
-       VBR,
-       CAAR,
-       MSP,
-       ITT0,
-       ITT1,
-       DTT0,
-       DTT1,
-       MMUSR,
-       TC,
-       SRP,
-       URP,
-       /* end of movec ordering constraints */
-       
-       FPI,
-       FPS,
-       FPC,
-       
-       DRP,
-       CRP,
-       CAL,
-       VAL,
-       SCC,
-       AC,
-       BAD,
-       BAD0 = BAD,
-       BAD1,
-       BAD2,
-       BAD3,
-       BAD4,
-       BAD5,
-       BAD6,
-       BAD7,
-       BAC,
-       BAC0 = BAC,
-       BAC1,
-       BAC2,
-       BAC3,
-       BAC4,
-       BAC5,
-       BAC6,
-       BAC7,
-       PSR,
-       PCSR,
-       
-       IC,     /* instruction cache token */
-       DC,     /* data cache token */
-       NC,     /* no cache token */
-       BC,     /* both caches token */
-       
-};
-
-/* Internal form of an operand.  */
-struct m68k_op {
-       char    *error;         /* Couldn't parse it */
-       enum operand_type mode; /* What mode this instruction is in.  */
-       enum _register reg;             /* Base register */
-       struct m68k_exp *con1;
-       int     ireg;           /* Index register */
-       int     isiz;           /* 0==unspec  1==byte(?)  2==short  3==long  */
-       int     imul;           /* Multipy ireg by this (1,2,4,or 8) */
-       struct  m68k_exp *con2;
-};
-
-/* internal form of a 68020 instruction */
-struct m68k_it {
-       char    *error;
-       char    *args;          /* list of opcode info */
-       int     numargs;
-       
-       int     numo;           /* Number of shorts in opcode */
-       short   opcode[11];
-       
-       struct m68k_op operands[6];
-       
-       int     nexp;           /* number of exprs in use */
-       struct m68k_exp exprs[4];
-       
-       int     nfrag;          /* Number of frags we have to produce */
-       struct {
-               int fragoff;    /* Where in the current opcode[] the frag ends */
-               symbolS *fadd;
-               long foff;
-               int fragty;
-       } fragb[4];
-       
-       int     nrel;           /* Num of reloc strucs in use */
-       struct  {
-               int     n;
-               symbolS *add,
-               *sub;
-               long off;
-               char    wid;
-               char    pcrel;
-       } reloc[5];             /* Five is enough??? */
-};
-
-#define cpu_of_arch(x)         ((x) & m68000up)
-#define float_of_arch(x)       ((x) & mfloat)
-#define mmu_of_arch(x)         ((x) & mmmu)
-
-static struct m68k_it the_ins;         /* the instruction being assembled */
-
-/* Macros for adding things to the m68k_it struct */
-
-#define addword(w)     the_ins.opcode[the_ins.numo++]=(w)
-
-/* Like addword, but goes BEFORE general operands */
-#define insop(w)       {int z;\
-                            for(z=the_ins.numo;z>opcode->m_codenum;--z)\
-                                the_ins.opcode[z]=the_ins.opcode[z-1];\
-                                    for(z=0;z<the_ins.nrel;z++)\
-                                        the_ins.reloc[z].n+=2;\
-                                            the_ins.opcode[opcode->m_codenum]=w;\
-                                                the_ins.numo++;\
-                                            }
-
-
-#define add_exp(beg,end) (\
-                         the_ins.exprs[the_ins.nexp].e_beg=beg,\
-                         the_ins.exprs[the_ins.nexp].e_end=end,\
-                         &the_ins.exprs[the_ins.nexp++]\
-                         )
-
-
-/* The numo+1 kludge is so we can hit the low order byte of the prev word. Blecch*/
-#define add_fix(width,exp,pc_rel) {\
-                                      the_ins.reloc[the_ins.nrel].n= ((width)=='B') ? (the_ins.numo*2-1) : \
-                                          (((width)=='b') ? ((the_ins.numo-1)*2) : (the_ins.numo*2));\
-                                              the_ins.reloc[the_ins.nrel].add=adds((exp));\
-                                                  the_ins.reloc[the_ins.nrel].sub=subs((exp));\
-                                                      the_ins.reloc[the_ins.nrel].off=offs((exp));\
-                                                          the_ins.reloc[the_ins.nrel].wid=width;\
-                                                              the_ins.reloc[the_ins.nrel++].pcrel=pc_rel;\
-                                                          }
-
-#define add_frag(add,off,type)  {\
-                                    the_ins.fragb[the_ins.nfrag].fragoff=the_ins.numo;\
-                                        the_ins.fragb[the_ins.nfrag].fadd=add;\
-                                            the_ins.fragb[the_ins.nfrag].foff=off;\
-                                                the_ins.fragb[the_ins.nfrag++].fragty=type;\
-                                            }
-
-#define isvar(exp)     ((exp) && (adds(exp) || subs(exp)))
-
-#define seg(exp)       ((exp)->e_exp.X_seg)
-#define adds(exp)      ((exp)->e_exp.X_add_symbol)
-#define subs(exp)      ((exp)->e_exp.X_subtract_symbol)
-#define offs(exp)      ((exp)->e_exp.X_add_number)
-
-
-struct m68k_incant {
-       char *m_operands;
-       unsigned long m_opcode;
-       short m_opnum;
-       short m_codenum;
-       enum m68k_architecture m_arch;
-       struct m68k_incant *m_next;
-};
-
-#define getone(x)      ((((x)->m_opcode)>>16)&0xffff)
-#define gettwo(x)      (((x)->m_opcode)&0xffff)
-
-
-#if __STDC__ == 1
-
-static char *crack_operand(char *str, struct m68k_op *opP);
-static int get_num(struct m68k_exp *exp, int ok);
-static int get_regs(int i, char *str, struct m68k_op *opP);
-static int reverse_16_bits(int in);
-static int reverse_8_bits(int in);
-static int try_index(char **s, struct m68k_op *opP);
-static void install_gen_operand(int mode, int val);
-static void install_operand(int mode, int val);
-static void s_bss(void);
-static void s_data1(void);
-static void s_data2(void);
-static void s_even(void);
-static void s_proc(void);
-
-#else /* not __STDC__ */
-
-static char *crack_operand();
-static int get_num();
-static int get_regs();
-static int reverse_16_bits();
-static int reverse_8_bits();
-static int try_index();
-static void install_gen_operand();
-static void install_operand();
-static void s_bss();
-static void s_data1();
-static void s_data2();
-static void s_even();
-static void s_proc();
-
-#endif /* not __STDC__ */
-
-static enum m68k_architecture current_architecture = _m68k_undef;
-
-/* BCC68000 is for patching in an extra jmp instruction for long offsets
-   on the 68000.  The 68000 doesn't support long branches with branchs */
-
-/* This table desribes how you change sizes for the various types of variable
-   size expressions.  This version only supports two kinds. */
-
-/* Note that calls to frag_var need to specify the maximum expansion needed */
-/* This is currently 10 bytes for DBCC */
-
-/* The fields are:
-   How far Forward this mode will reach:
-   How far Backward this mode will reach:
-   How many bytes this mode will add to the size of the frag
-   Which mode to go to if the offset won't fit in this one
-   */
-const relax_typeS
-    md_relax_table[] = {
-           { 1,                1,              0,      0 },    /* First entries aren't used */
-           { 1,                1,              0,      0 },    /* For no good reason except */
-           { 1,                1,              0,      0 },    /* that the VAX doesn't either */
-           { 1,                1,              0,      0 },
-           
-           { (127),    (-128),         0,      TAB(BRANCH,SHORT)},
-           { (32767),  (-32768),       2,      TAB(BRANCH,LONG) },
-           { 0,                0,              4,      0 },
-           { 1,                1,              0,      0 },
-           
-           { 1,                1,              0,      0 },    /* FBRANCH doesn't come BYTE */
-           { (32767),  (-32768),       2,      TAB(FBRANCH,LONG)},
-           { 0,                0,              4,      0 },
-           { 1,                1,              0,      0 },
-           
-           { 1,                1,              0,      0 },    /* PCREL doesn't come BYTE */
-           { (32767),  (-32768),       2,      TAB(PCREL,LONG)},
-           { 0,                0,              4,      0 },
-           { 1,                1,              0,      0 },
-           
-           { (127),    (-128),         0,      TAB(BCC68000,SHORT)},
-           { (32767),  (-32768),       2,      TAB(BCC68000,LONG) },
-           { 0,                0,              6,      0 },    /* jmp long space */
-           { 1,                1,              0,      0 },
-           
-           { 1,                1,              0,      0 },    /* DBCC doesn't come BYTE */
-           { (32767),  (-32768),       2,      TAB(DBCC,LONG) },
-           { 0,                0,              10,     0 },    /* bra/jmp long space */
-           { 1,                1,              0,      0 },
-           
-           { 1,                1,              0,      0 },    /* PCLEA doesn't come BYTE */
-           { 32767,    -32768,         2,      TAB(PCLEA,LONG) },
-           { 0,                0,              6,      0 },
-           { 1,                1,              0,      0 },
-           
-    };
-
-/* These are the machine dependent pseudo-ops.  These are included so
-   the assembler can work on the output from the SUN C compiler, which
-   generates these.
-   */
-
-/* This table describes all the machine specific pseudo-ops the assembler
-   has to support.  The fields are:
-   pseudo-op name without dot
-   function to call to execute this pseudo-op
-   Integer arg to pass to the function
-   */
-#ifdef MRI
-
-void cons();
-void s_sect();
-void float_cons();
-void s_align_bytes();
-void s_chip();
-void s_ds();
-void s_dcb();
-void s_dc();
-const pseudo_typeS md_pseudo_table[] = {
-       { "xdef",       s_globl,        0       },
-       { "sect",       s_sect,         0       },
-       { "dc",         s_dc,           2       },
-       { "dc.d",       float_cons,     'd'     },
-       { "dc.s",       float_cons,     'f'     },
-       { "dc.l",       s_dc,           4       },
-       { "dc.w",       s_dc,           2       },
-       { "dc.b",       s_dc,           1       },
-       { "comline",    s_ds,           1       },
-       { "ds.b",       s_ds,           1       },
-       { "ds.w",       s_ds,           2       },
-       { "ds",         s_ds,           2       },
-       { "ds.l",       s_ds,           4       },
-       { "ds.d",       s_ds,           8       },
-       { "ds.s",       s_ds,           4       },
-       { "dcb",        s_dcb,          2       },
-       { "dcb.b",      s_dcb,          1       },
-       { "dcb.w",      s_dcb,          2       },
-       { "dcb.l",      s_dcb,          4       },
-       { "xcom",       s_comm,         0       },
-       { "align",      s_align_bytes,  0       },
-       { "chip",       s_chip,         0       },
-       { 0,            0,              0       }
-};
-#else
-
-const pseudo_typeS md_pseudo_table[] = {
-       { "data1",      s_data1,        0       },
-       { "data2",      s_data2,        0       },
-       { "bss",        s_bss,          0       },
-       { "even",       s_even,         0       },
-       { "skip",       s_space,        0       },
-       { "proc",       s_proc,         0       },
-       { 0,            0,              0       }
-}
-
-
-
-
-#endif
-
-/* #define isbyte(x)   ((x)>=-128 && (x)<=127) */
-/* #define isword(x)   ((x)>=-32768 && (x)<=32767) */
-
-#define issbyte(x)     ((x)>=-128 && (x)<=127)
-#define isubyte(x)     ((x)>=0 && (x)<=255)
-#define issword(x)     ((x)>=-32768 && (x)<=32767)
-#define isuword(x)     ((x)>=0 && (x)<=65535)
-
-#define isbyte(x)      ((x)>=-128 && (x)<=255)
-#define isword(x)      ((x)>=-32768 && (x)<=65535)
-#define islong(x)      (1)
-
-extern char *input_line_pointer;
-
-enum {
-       FAIL = 0,
-       OK = 1,
-};
-
-/* JF these tables here are for speed at the expense of size */
-/* You can replace them with the #if 0 versions if you really
-   need space and don't mind it running a bit slower */
-
-static char mklower_table[256];
-#define mklower(c) (mklower_table[(unsigned char)(c)])
-static char notend_table[256];
-static char alt_notend_table[256];
-#define notend(s) ( !(notend_table[(unsigned char)(*s)] || (*s==':' &&\
-                                                           alt_notend_table[(unsigned char)(s[1])])))
-
-#if 0
-#define mklower(c)     (isupper(c) ? tolower(c) : c)
-#endif
-
-#define ISSPACE(x) ((x) == ' ' || (x) == '\t')
-#ifdef MRI
-#define MULTIPLIER '*'
-#define SIZER '.'
-#else
-#define MULTIPLIER ':'
-#define SIZER ':'
-#endif
-
-
-/* JF modified this to handle cases where the first part of a symbol name
-   looks like a register */
-
-/*
- * m68k_reg_parse() := if it looks like a register, return it's token &
- * advance the pointer.
- */
-
-enum _register m68k_reg_parse(ccp)
-register char **ccp;
-{
-#ifndef MAX_REG_NAME_LEN
-#define MAX_REG_NAME_LEN (6)
-#endif /* MAX_REG_NAME_LEN */
-       register char c[MAX_REG_NAME_LEN];
-       char *p, *q;
-       register int n = 0,
-       ret = FAIL;
-       
-       c[0] = mklower(ccp[0][0]);
-#ifdef REGISTER_PREFIX
-       if (c[0] != REGISTER_PREFIX) {
-               return(FAIL);
-       } /* need prefix */
-#endif
-       
-       for (p = c, q = ccp[0]; p < c + MAX_REG_NAME_LEN; ++p, ++q)
-           {
-                   if (*q == 0)
-                       {
-                               *p = 0;
-                               break;
-                       }
-                   else
-                       *p = mklower(*q);
-           } /* downcase */
-       
-       switch(c[0]) {
-       case 'a':
-               if(c[1]>='0' && c[1]<='7') {
-                       n=2;
-                       ret=ADDR+c[1]-'0';
-               }
-#ifndef NO_68851
-               else if (c[1] == 'c') {
-                       n = 2;
-                       ret = AC;
-               }
-#endif
-               break;
-#ifndef NO_68851
-       case 'b':
-               if (c[1] == 'a') {
-                       if (c[2] == 'd') {
-                               if (c[3] >= '0' && c[3] <= '7') {
-                                       n = 4;
-                                       ret = BAD + c[3] - '0';
-                               }
-                       } /* BAD */
-                       if (c[2] == 'c') {
-                               if (c[3] >= '0' && c[3] <= '7') {
-                                       n = 4;
-                                       ret = BAC + c[3] - '0';
-                               }
-                       } /* BAC */
-               } else if (c[1] == 'c') {
-                       n = 2;
-                       ret = BC;
-               } /* BC */
-               break;
-#endif
-       case 'c':
-#ifndef NO_68851
-               if (c[1] == 'a' && c[2] == 'l') {
-                       n = 3;
-                       ret = CAL;
-               } else
-#endif
-                   /* This supports both CCR and CC as the ccr reg. */
-                   if(c[1]=='c' && c[2]=='r') {
-                           n=3;
-                           ret = CCR;
-                   } else if(c[1]=='c') {
-                           n=2;
-                           ret = CCR;
-                   } else if(c[1]=='a' && (c[2]=='a' || c[2]=='c') && c[3]=='r') {
-                           n=4;
-                           ret = c[2]=='a' ? CAAR : CACR;
-                   }
-#ifndef NO_68851
-                   else if (c[1] == 'r' && c[2] == 'p') {
-                           n = 3;
-                           ret = (CRP);
-                   }
-#endif
-               break;
-       case 'd':
-               if (c[1] >= '0' && c[1] <= '7') {
-                       n = 2;
-                       ret = DATA + c[1] - '0';
-               } else if (c[1] == 'f' && c[2] == 'c') {
-                       n = 3;
-                       ret = DFC;
-               } else if (c[1] == 'c') {
-                       n = 2;
-                       ret = DC;
-               } else if (c[1] == 't' && c[2] == 't') {
-                       if ('0' <= c[3] && c[3] <= '1') {
-                               n = 4;
-                               ret = DTT0 + (c[3] - '0');
-                       } /* DTT[01] */
-               }
-#ifndef NO_68851
-               else if (c[1] == 'r' && c[2] == 'p') {
-                       n = 3;
-                       ret = (DRP);
-               }
-#endif
-               break;
-       case 'f':
-               if(c[1]=='p') {
-                       if(c[2]>='0' && c[2]<='7') {
-                               n=3;
-                               ret = FPREG+c[2]-'0';
-                               if(c[3]==':')
-                                   ccp[0][3]=',';
-                       } else if(c[2]=='i') {
-                               n=3;
-                               ret = FPI;
-                       } else if(c[2]=='s') {
-                               n= (c[3] == 'r' ? 4 : 3);
-                               ret = FPS;
-                       } else if(c[2]=='c') {
-                               n= (c[3] == 'r' ? 4 : 3);
-                               ret = FPC;
-                       } else if (!isalpha(c[2]) && !isdigit(c[2])) {
-                               n  = 2;
-                               ret = ADDR + 6;
-                       }
-                       
-                       
-               }
-               break;
-       case 'i':
-               if (c[1] == 's' && c[2] == 'p') {
-                       n = 3;
-                       ret = ISP;
-               } else if (c[1] == 'c') {
-                       n = 2;
-                       ret = IC;
-               } else if (c[1] == 't' && c[2] == 't') {
-                       if ('0' <= c[3] && c[3] <= '1') {
-                               n = 4;
-                               ret = ITT0 + (c[3] - '0');
-                       } /* ITT[01] */
-               }
-               break;
-       case 'm':
-               if (c[1] == 's' && c[2] == 'p') {
-                       n = 3;
-                       ret = MSP;
-               } else if (c[1] == 'm' && c[2] == 'u' && c[3] == 's' && c[4] == 'r') {
-                       n = 5;
-                       ret = MMUSR;
-               }
-               break;
-       case 'n':
-               if (c[1] == 'c') {
-                       n = 2;
-                       ret = NC;
-               }
-               break;
-       case 'p':
-               if(c[1]=='c') {
-#ifndef NO_68851
-                       if(c[2] == 's' && c[3]=='r') {
-                               n=4;
-                               ret = (PCSR);
-                       } else
-#endif
-                           {
-                                   n=2;
-                                   ret = PC;
-                           }
-               }
-#ifndef NO_68851
-               else if (c[1] == 's' && c[2] == 'r') {
-                       n = 3;
-                       ret = (PSR);
-               }
-#endif
-               break;
-       case 's':
-#ifndef NO_68851
-               if (c[1] == 'c' && c[2] == 'c') {
-                       n = 3;
-                       ret = (SCC);
-               } else 
-#endif
-                   if (c[1] == 'r') {
-                           if (c[2] == 'p') {
-                                   n = 3;
-                                   ret = SRP;
-                           } else {
-                                   n = 2;
-                                   ret = SR;
-                           } /* srp else sr */
-                   } else if (c[1] == 'p') {
-                           n = 2;
-                           ret = SP;
-                   } else if (c[1] == 'f' && c[2] == 'c') {
-                           n = 3;
-                           ret = SFC;
-                   }
-               break;
-       case 't':
-               if (c[1] == 'c') {
-                       n = 2;
-                       ret = TC;
-               }
-               break;
-       case 'u':
-               if (c[1] == 's' && c[2] == 'p') {
-                       n=3;
-                       ret = USP;
-               } else if (c[1] == 'r' && c[2] == 'p') {
-                       n = 3;
-                       ret = URP;
-               }
-               break;
-       case 'v':
-#ifndef NO_68851
-               if (c[1] == 'a' && c[2] == 'l') {
-                       n = 3;
-                       ret = (VAL);
-               } else
-#endif
-                   if(c[1]=='b' && c[2]=='r') {
-                           n=3;
-                           ret = VBR;
-                   }
-               break;
-       case 'z':
-               if(c[1]=='p' && c[2]=='c') {
-                       n=3;
-                       ret = ZPC;
-               }
-               break;
-       default:
-               break;
-       }
-       if(n) {
-#ifdef REGISTER_PREFIX
-               n++;
-#endif
-               if(isalnum(ccp[0][n]) || ccp[0][n]=='_')
-                   ret=FAIL;
-               else
-                   ccp[0]+=n;
-       } else
-           ret = FAIL;
-       return ret;
-}
-
-#define SKIP_WHITE()   { str++; if(ISSPACE(*str)) str++;}
-
-#ifdef MRI
-
-
-/* Parse an operand from the text *str into the operand struct *opP. */ 
-int
-    m68k_ip_op(str,opP)
-char *str;
-register struct m68k_op *opP;
-{
-       char    *strend;
-       long    i;
-       char    *parse_index();
-       
-       /* Skip leading blank */
-       if(ISSPACE(*str))
-           str++;
-       if(!*str) {
-               opP->error="Missing operand";
-               return FAIL;
-       }
-       /* *strend = last character of string */
-       for(strend=str;*strend;strend++)
-           ;
-       --strend;
-       
-       /* Logic of the parsing switch(*str):
-          case                 opP->mode =
-          ----                 -----------
-          #anything            IMMED   1
-          REG                  AREG or DREG or MSCR    3 or 2 or 13
-          REG- or REG/         REGLST  14
-          (REG)                        AINDR   4
-          (REG)+                       AINC    6
-          (REG,INDX)           AINDX   8
-          (EXPR,REG)           AOFF    7
-          (EXPR,REG,INDX)         AINDX        8
-          -(REG)                       ADEC    5
-          EXP2(REG)            AOFF    7
-          EXP2(REG,INDX)               AINDX   8
-          EXP2                 ABSL    12
-          
-          REG  means truth(m68k_reg_parse(&str))
-          INDX means truth(try_index(&str,opP))
-          EXPR means not REG
-          EXP2 means not REG and not '(' and not '-('
-          */
-       
-       if(*str=='#') {
-               /* "#<expression>"  Immediate mode */
-               str++;
-               opP->con1=add_exp(str,strend);
-               opP->mode=IMMED;
-               return OK;
-       }
-       
-       i=m68k_reg_parse(&str);
-       if (i!=FAIL) {
-               if(*str=='\0') {
-                       /* "Rn"  Register Direct mode */
-                       opP->reg=i;
-                       if(i>=DATA+0 && i<=DATA+7)
-                           opP->mode=DREG;
-                       else if(i>=ADDR+0 && i<=ADDR+7)
-                           opP->mode=AREG;
-                       else
-                           opP->mode=MSCR;
-                       return OK;
-               }
-               else if(*str=='/' || *str=='-') {
-                       /* "Rm-Rn/Ro-Rp"  Register list for MOVEM instruction */
-                       opP->mode=REGLST;
-                       return get_regs(i,str,opP);
-               }
-               else {
-                       opP->error="Junk after register name";
-                       return FAIL;
-               }
-       }
-       
-       if(*str=='(') {
-               str++;
-               i=m68k_reg_parse(&str);
-               if((i<ADDR+0 || i>ADDR+7) && i!=PC && i!=ZPC && i!=FAIL
-                  && (*str != ')' || str[1] != '\0' || i<DATA+0 || i>DATA+7)) {
-                       /* Can't indirect off non address regs,
-                          but (dx) is OK for cas2.  */
-                       opP->error="Invalid indirect register";
-                       return FAIL;
-               }
-               if(i!=FAIL) {
-                       opP->reg=i;
-                       if(*str==')') {
-                               str++;
-                               if(*str=='\0') {
-                                       /* "(An)"  Address Register Indirect mode
-                                          or "(Dn)" for cas2 instruction.  */
-                                       if (i < DATA + 0 || i > DATA + 7)
-                                         opP->mode=AINDR;
-                                       else
-                                         opP->mode=DINDR;
-                                       return OK;
-                               }
-                               if(*str=='+') {
-                                       if(str[1]=='\0') {
-                                               /* "(An)+" Register Indirect w Postincrement */
-                                               opP->mode=AINC;
-                                               return OK;
-                                       }
-                               }
-                               opP->error="Junk after indirect";
-                               return FAIL;
-                       }
-                       if(*str==',') {
-                               str++;
-                               i=try_index(&str,opP);
-                               if(i==FAIL) return FAIL;
-                               /* "(An,Rn)"  Register Indirect with Index mode*/
-                               opP->mode=AINDX;
-                               return OK;
-                       }
-                       else {
-                               opP->error="Bad indirect syntax";
-                               return FAIL;
-                       }
-               }
-               else {
-                       /* "(EXPR,..." , a displacement */
-                       char *stmp;
-                       char *index();
-                       
-                       if(stmp=index(str,',')) {
-                               opP->con1=add_exp(str,stmp-1);
-                               str=stmp;
-                               SKIP_WHITE();
-                               i=m68k_reg_parse(&str);
-                               if((i<ADDR+0 || i>ADDR+7) && i!=PC && i!=ZPC) {
-                                       /* Can't indirect off non address regs */
-                                       opP->error="Invalid indirect register";
-                                       return FAIL;
-                               }
-                               if(i!=FAIL) {
-                                       opP->reg=i;
-                                       if(*str==')') {
-                                               /* "(d,An)"  Register Indirect w Displacement */
-                                               opP->mode=AOFF;
-                                               return OK;
-                                       }
-                                       if(*str==',') {
-                                               str++;
-                                               i=try_index(&str,opP);
-                                               if(i==FAIL) return FAIL;
-                                               /* "(d,An,Rn)"  Register Indirect with Index */
-                                               opP->mode=AINDX;
-                                               return OK;
-                                       }
-                                       else {
-                                               opP->error="Bad indirect syntax";
-                                               return FAIL;
-                                       }
-                               }
-                               else {
-                                       opP->error="Invalid register";
-                                       return FAIL;
-                               }
-                       }
-                       else {
-                               opP->error="Missing register for indirect";
-                               return FAIL;
-                       }
-               }
-       }
-       
-       if(*str=='-') {
-               if(str[1]=='(') {
-                       str = str+2;
-                       i=m68k_reg_parse(&str);
-                       if((i<ADDR+0 || i>ADDR+7) && i!=PC && i!=ZPC && i!=FAIL) {
-                               /* Can't indirect off non address regs */
-                               opP->error="Invalid indirect register";
-                               return FAIL;
-                       }
-                       if(i!=FAIL) {
-                               opP->reg=i;
-                               if(*str==')') {
-                                       str++;
-                                       if(*str=='\0') {
-                                               /* "-(An)" Register Indirect with Predecrement */
-                                               opP->mode=ADEC;
-                                               return OK;
-                                       }
-                                       opP->error="Junk after indirect";
-                                       return FAIL;
-                               }
-                               opP->error="Bad indirect syntax";
-                               return FAIL;
-                       }
-                       opP->error="Invalid register";
-                       return FAIL;
-               }
-               /* if '-' but not "-(', do nothing */
-       }
-       
-       /* whether *str=='-' or not */
-       {
-               /* "EXP2" or "EXP2(REG..." */
-               char *stmp;
-               char *index();
-               if(stmp=index(str,'(')) {
-                       opP->con1=add_exp(str,stmp-1);
-                       str=stmp+1;
-                       i=m68k_reg_parse(&str);
-                       if((i<ADDR+0 || i>ADDR+7) && i!=PC && i!=ZPC) {
-                               /* Can't indirect off non address regs */
-                               opP->error="Invalid indirect register";
-                               return FAIL;
-                       }
-                       if(i!=FAIL) {
-                               opP->reg=i;
-                               if(*str==')') {
-                                       /* "d(An)"  Register Indirect w Displacement */
-                                       opP->mode=AOFF;
-                                       return OK;
-                               }
-                               if(*str==',') {
-                                       str++;
-                                       i=try_index(&str,opP);
-                                       if(i==FAIL) return FAIL;
-                                       /* "d(An,Rn)"  Register Indirect with Index */
-                                       opP->mode=AINDX;
-                                       return OK;
-                               }
-                               else {
-                                       opP->error="Bad indirect syntax";
-                                       return FAIL;
-                               }
-                       }
-                       else {
-                               opP->error="Invalid register";
-                               return FAIL;
-                       }
-               }
-               else {
-                       /* "EXP2"  Absolute */
-                       opP->mode=ABSL;
-                       if(strend[-1]=='.') {   /* mode ==foo.[wl] */
-                               switch(*strend) {
-                               case 'w':
-                               case 'W':
-                                       opP->isiz=2;
-                                       break;
-                               case 'l':
-                               case 'L':
-                                       opP->isiz=3;
-                                       break;
-                               default:
-                                       opP->error="Size spec not .W or .L";
-                                       return FAIL;
-                               }
-                               strend-=2;
-                       } 
-                       else opP->isiz=0;
-                       
-                       
-                       opP->con1=add_exp(str,strend);
-                       return OK;
-               }
-       }
-}
-/* end of m68k_ip_op () */
-#else
-/*
- * m68k_ip_op := '#' + <anything>
- *     | <register> + range_sep + get_regs
- *     ;
- * 
- * range_sep := '/' | '-' ;
- *
- * SKIP_WHITE := <empty> | ' ' ;
- *
- */
-
-int
-    m68k_ip_op(str,opP)
-char *str;
-register struct m68k_op *opP;
-{
-       char    *strend;
-       long    i;
-       char    *parse_index();
-       
-       if (ISSPACE(*str)) {
-               str++;
-       } /* Find the beginning of the string */
-       
-       if(!*str) {
-               opP->error="Missing operand";
-               return FAIL;
-       } /* Out of gas */
-       
-       for(strend = str; *strend; strend++) ;;
-       
-       --strend;
-       
-       if(*str=='#') {
-               str++;
-               opP->con1=add_exp(str,strend);
-               opP->mode=IMMED;
-               return OK;
-       } /* Guess what:  A constant.  Shar and enjoy */
-       
-       i = m68k_reg_parse(&str);
-       
-       /* is a register, is exactly a register, and is followed by '@' */
-       
-       if((i==FAIL || *str!='\0') && *str!='@') {
-               char *stmp;
-               
-               if(i!=FAIL && (*str=='/' || *str=='-')) {
-                       opP->mode=REGLST;
-                       return(get_regs(i,str,opP));
-               }
-               if ((stmp=strchr(str,'@')) != '\0') {
-                       opP->con1=add_exp(str,stmp-1);
-                       if(stmp==strend) {
-                               opP->mode=AINDX;
-                               return(OK);
-                       }
-                       
-                       if ((current_architecture & m68020up) == 0) {
-                               return(FAIL);
-                       } /* if target is not a '20 or better */
-                       
-                       stmp++;
-                       if(*stmp++!='(' || *strend--!=')') {
-                               opP->error="Malformed operand";
-                               return(FAIL);
-                       }
-                       i=try_index(&stmp,opP);
-                       opP->con2=add_exp(stmp,strend);
-                       
-                       if (i == FAIL) {
-                               opP->mode=AMIND;
-                       } else {
-                               opP->mode=APODX;
-                       }
-                       return(OK);
-               } /* if there's an '@' */
-               opP->mode = ABSL;
-               opP->con1 = add_exp(str,strend);
-               return(OK);
-       } /* not a register, not exactly a register, or no '@' */
-       
-       opP->reg=i;
-       
-       if (*str=='\0') {
-               if(i>=DATA+0 && i<=DATA+7)
-                   opP->mode=DREG;
-               else if(i>=ADDR+0 && i<=ADDR+7)
-                   opP->mode=AREG;
-               else
-                   opP->mode=MSCR;
-               return OK;
-       }
-       
-       /* Can't indirect off non address regs, but Dx@ is OK for cas2 */
-       if((i<ADDR+0 || i>ADDR+7) && i!=PC && i!=ZPC && i!=FAIL
-          && (str[1] != '\0' || i<DATA+0 || i>DATA+7)) {
-               opP->error="Invalid indirect register";
-               return FAIL;
-       }
-       know(*str == '@');
-       
-       str++;
-       switch(*str) {
-       case '\0':
-               if (i < DATA + 0 || i > DATA + 7)
-                 opP->mode=AINDR;
-               else
-                 opP->mode=DINDR;
-               return OK;
-       case '-':
-               opP->mode=ADEC;
-               return OK;
-       case '+':
-               opP->mode=AINC;
-               return OK;
-       case '(':
-               str++;
-               break;
-       default:
-               opP->error="Junk after indirect";
-               return FAIL;
-       }
-       /* Some kind of indexing involved.  Lets find out how bad it is */
-       i=try_index(&str,opP);
-       /* Didn't start with an index reg, maybe its offset or offset,reg */
-       if(i==FAIL) {
-               char *beg_str;
-               
-               beg_str=str;
-               for(i=1;i;) {
-                       switch(*str++) {
-                       case '\0':
-                               opP->error="Missing )";
-                               return FAIL;
-                       case ',': i=0; break;
-                       case '(': i++; break;
-                       case ')': --i; break;
-                       }
-               }
-               /* if(str[-3]==':') {
-                  int siz;
-                  
-                  switch(str[-2]) {
-                  case 'b':
-                  case 'B':
-                  siz=1;
-                  break;
-                  case 'w':
-                  case 'W':
-                  siz=2;
-                  break;
-                  case 'l':
-                  case 'L':
-                  siz=3;
-                  break;
-                  default:
-                  opP->error="Specified size isn't :w or :l";
-                  return FAIL;
-                  }
-                  opP->con1=add_exp(beg_str,str-4);
-                  opP->con1->e_siz=siz;
-                  } else */
-               opP->con1=add_exp(beg_str,str-2);
-               /* Should be offset,reg */
-               if(str[-1]==',') {
-                       i=try_index(&str,opP);
-                       if(i==FAIL) {
-                               opP->error="Malformed index reg";
-                               return FAIL;
-                       }
-               }
-       }
-       /* We've now got offset)   offset,reg)   or    reg) */
-       
-       if (*str == '\0') {
-               /* Th-the-thats all folks */
-               if (opP->reg == FAIL) opP->mode = AINDX;        /* Other form of indirect */
-               else if(opP->ireg == FAIL) opP->mode = AOFF;
-               else opP->mode = AINDX;
-               return(OK);
-       }
-       /* Next thing had better be another @ */
-       if(*str!='@' || str[1]!='(') {
-               opP->error = "junk after indirect";
-               return(FAIL);
-       }
-       
-       if ((current_architecture & m68020up) == 0) {
-               return(FAIL);
-       } /* if target is not a '20 or better */
-       
-       str+=2;
-       
-       if(opP->ireg != FAIL) {
-               opP->mode = APRDX;
-               
-               i = try_index(&str, opP);
-               if (i != FAIL) {
-                       opP->error = "Two index registers!  not allowed!";
-                       return(FAIL);
-               }
-       } else {
-               i = try_index(&str, opP);
-       }
-       
-       if (i == FAIL) {
-               char *beg_str;
-               
-               beg_str = str;
-               
-               for (i = 1; i; ) {
-                       switch(*str++) {
-                       case '\0':
-                               opP->error="Missing )";
-                               return(FAIL);
-                       case ',': i=0; break;
-                       case '(': i++; break;
-                       case ')': --i; break;
-                       }
-               }
-               
-               opP->con2=add_exp(beg_str,str-2);
-               
-               if (str[-1] == ',') {
-                       if (opP->ireg != FAIL) {
-                               opP->error = "Can't have two index regs";
-                               return(FAIL);
-                       }
-                       
-                       i = try_index(&str, opP);
-                       
-                       if (i == FAIL) {
-                               opP->error = "malformed index reg";
-                               return(FAIL);
-                       }
-                       
-                       opP->mode = APODX;
-               } else if (opP->ireg != FAIL) {
-                       opP->mode = APRDX;
-               } else {
-                       opP->mode = AMIND;
-               }
-       } else {
-               opP->mode = APODX;
-       }
-       
-       if(*str!='\0') {
-               opP->error="Junk after indirect";
-               return FAIL;
-       }
-       return(OK);
-} /* m68k_ip_op() */
-#endif
-/*
- * 
- * try_index := data_or_address_register + ')' + SKIP_W
- *     | data_or_address_register + ':' + SKIP_W + size_spec + SKIP_W + multiplier + ')' + SKIP_W
- *
- * multiplier := <empty>
- *     | ':' + multiplier_number
- *     ;
- *
- * multiplier_number := '1' | '2' | '4' | '8' ;
- *
- * size_spec := 'l' | 'L' | 'w' | 'W' ;
- *
- * SKIP_W := <empty> | ' ' ;
- *
- */
-
-static int try_index(s,opP)
-char **s;
-struct m68k_op *opP;
-{
-       register int    i;
-       char    *ss;
-#define SKIP_W()       { ss++; if (ISSPACE(*ss)) ss++;}
-       
-       ss= *s;
-       /* SKIP_W(); */
-       i=m68k_reg_parse(&ss);
-       if(!(i>=DATA+0 && i<=ADDR+7)) { /* if i is not DATA or ADDR reg */
-               *s=ss;
-               return FAIL;
-       }
-       opP->ireg=i;
-       /* SKIP_W(); */
-       if(*ss==')') {
-               opP->isiz=0;
-               opP->imul=1;
-               SKIP_W();
-               *s=ss;
-               return OK;
-       }
-       if(*ss!=SIZER) 
-           {
-                   opP->error="Missing : in index register";
-                   *s=ss;
-                   return FAIL;
-           }
-       SKIP_W();
-       switch(*ss) {
-       case 'w':
-       case 'W':
-               opP->isiz=2;
-               break;
-       case 'l':
-       case 'L':
-               opP->isiz=3;
-               break;
-       default:
-               opP->error="Index register size spec not :w or :l";
-               *s=ss;
-               return FAIL;
-       }
-       SKIP_W();
-       if(*ss==MULTIPLIER)
-           {
-                   SKIP_W();
-                   switch(*ss) {
-                   case '1':
-                   case '2':
-                   case '4':
-                   case '8':
-                           opP->imul= *ss-'0';
-                           break;
-                   default:
-                           opP->error="index multiplier not 1, 2, 4 or 8";
-                           *s=ss;
-                           return FAIL;
-                   }
-                   SKIP_W();
-           } else opP->imul=1;
-       if(*ss!=')') {
-               opP->error="Missing )";
-               *s=ss;
-               return FAIL;
-       }
-       SKIP_W();
-       *s=ss;
-       return OK;
-} /* try_index() */
-
-#ifdef TEST1   /* TEST1 tests m68k_ip_op(), which parses operands */
-main()
-{
-       char buf[128];
-       struct m68k_op thark;
-       
-       for(;;) {
-               if(!gets(buf))
-                   break;
-               memset(&thark, '\0', sizeof(thark));
-               if(!m68k_ip_op(buf,&thark)) printf("FAIL:");
-               if(thark.error)
-                   printf("op1 error %s in %s\n",thark.error,buf);
-               printf("mode %d, reg %d, ",thark.mode,thark.reg);
-               if(thark.b_const)
-                   printf("Constant: '%.*s',",1+thark.e_const-thark.b_const,thark.b_const);
-               printf("ireg %d, isiz %d, imul %d ",thark.ireg,thark.isiz,thark.imul);
-               if(thark.b_iadd)
-                   printf("Iadd: '%.*s'",1+thark.e_iadd-thark.b_iadd,thark.b_iadd);
-               printf("\n");
-       }
-       exit(0);
-}
-
-#endif
-
-
-static struct hash_control*   op_hash = NULL;  /* handle of the OPCODE hash table
-                                                  NULL means any use before m68k_ip_begin()
-                                                  will crash */
-
-\f
-/*
- *             m 6 8 k _ i p ( )
- *
- * This converts a string into a 68k instruction.
- * The string must be a bare single instruction in sun format
- * with RMS-style 68020 indirects
- *  (example:  )
- *
- * It provides some error messages: at most one fatal error message (which
- * stops the scan) and at most one warning message for each operand.
- * The 68k instruction is returned in exploded form, since we have no
- * knowledge of how you parse (or evaluate) your expressions.
- * We do however strip off and decode addressing modes and operation
- * mnemonic.
- *
- * This function's value is a string. If it is not "" then an internal
- * logic error was found: read this code to assign meaning to the string.
- * No argument string should generate such an error string:
- * it means a bug in our code, not in the user's text.
- *
- * You MUST have called m68k_ip_begin() once and m86_ip_end() never before using
- * this function.
- */
-
-/* JF this function no longer returns a useful value.  Sorry */
-void m68k_ip (instring)
-char *instring;
-{
-       register char *p;
-       register struct m68k_op *opP;
-       register struct m68k_incant *opcode, prev_opcode;
-       register char *s;
-       register int tmpreg = 0,
-       baseo = 0,
-       outro = 0,
-       nextword;
-       int     siz1,
-       siz2;
-       char    c;
-       int     losing;
-       int     opsfound;
-       char    *crack_operand();
-       
-       LITTLENUM_TYPE words[6];
-       LITTLENUM_TYPE *wordp;
-       
-       if (ISSPACE(*instring))
-           instring++;                 /* skip leading whitespace */
-       
-       /* Scan up to end of operation-code, which MUST end in end-of-string
-          or exactly 1 space. */
-       for (p = instring; *p != '\0'; p++)
-           if (ISSPACE(*p))
-               break;
-       
-       
-       if (p == instring) {
-               the_ins.error = "No operator";
-               the_ins.opcode[0] = NULL;
-               /* the_ins.numo=1; */
-               return;
-       }
-       
-       /* p now points to the end of the opcode name, probably whitespace.
-          make sure the name is null terminated by clobbering the whitespace,
-          look it up in the hash table, then fix it back. */   
-       c = *p;
-       *p = '\0';
-#ifdef MRI
-       /* Copy from input line to our private buffer, and drop any dots */
-       {
-               char our_copy[100];
-               char *dst = our_copy;
-               char *src = instring;
-               while (*src) 
-                   {
-                           if (*src != '.') 
-                               *dst++ = *src;
-                           src++;
-                   }
-               *dst = 0;
-               
-               
-               opcode = (struct m68k_incant *)hash_find (op_hash, our_copy);
-               
-               /* If no match, try again with a w suffix */
-               if (!opcode) 
-                   {
-                           *dst++ = 'w';
-                           *dst = 0;
-                           opcode = (struct m68k_incant *)hash_find (op_hash, our_copy);
-                   }
-               
-               
-               
-       }
-       
-#else
-       opcode = (struct m68k_incant *)hash_find (op_hash, instring);
-#endif
-       *p = c;
-       
-       if (opcode == NULL) {
-               the_ins.error = "Unknown opcode";
-               the_ins.opcode[0] = NULL;
-               /* the_ins.numo=1; */
-               return;
-       }
-       
-       /* found a legitimate opcode, start matching operands */
-       while (ISSPACE(*p)) ++p;
-       
-       for(opP = &the_ins.operands[0]; *p; opP++) {
-               
-               p = crack_operand(p, opP);
-               
-               if (opP->error) {
-                       the_ins.error=opP->error;
-                       return;
-               }
-       }
-       
-       opsfound = opP - &the_ins.operands[0];
-       
-       /* This ugly hack is to support the floating pt opcodes in their standard form */
-       /* Essentially, we fake a first enty of type COP#1 */
-       if (opcode->m_operands[0]=='I') {
-               int     n;
-               
-               for(n=opsfound;n>0;--n)
-                   the_ins.operands[n]=the_ins.operands[n-1];
-               
-               /* memcpy((char *)(&the_ins.operands[1]), (char *)(&the_ins.operands[0]), opsfound*sizeof(the_ins.operands[0])); */
-               memset((char *)(&the_ins.operands[0]), '\0', sizeof(the_ins.operands[0]));
-               the_ins.operands[0].mode=MSCR;
-               the_ins.operands[0].reg=COPNUM; /* COP #1 */
-               opsfound++;
-       }
-       
-       /* We've got the operands.  Find an opcode that'll accept them */
-       for (losing = 0; ; ) {
-               /* if we didn't get the right number of ops,
-                  or we have no common model with this pattern
-                  then reject this pattern. */
-               
-               if (opsfound != opcode->m_opnum
-                   || ((opcode->m_arch & current_architecture) == 0)) {
-                       
-                       ++losing;
-                       
-               } else {
-                       for (s=opcode->m_operands, opP = &the_ins.operands[0]; *s && !losing; s += 2, opP++) {
-                               /* Warning: this switch is huge! */
-                               /* I've tried to organize the cases into  this order:
-                                  non-alpha first, then alpha by letter.  lower-case goes directly
-                                  before uppercase counterpart. */
-                               /* Code with multiple case ...: gets sorted by the lowest case ...
-                                  it belongs to.  I hope this makes sense. */
-                               switch(*s) {
-                               case '!':
-                                       if (opP->mode == MSCR || opP->mode == IMMED
-                                           || opP->mode == DREG || opP->mode == AREG
-                                           || opP->mode == AINC || opP->mode == ADEC
-                                           || opP->mode == REGLST)
-                                           losing++;
-                                       break;
-                                       
-                               case '#':
-                                       if(opP->mode!=IMMED)
-                                           losing++;
-                                       else {
-                                               long t;
-                                               
-                                               t=get_num(opP->con1,80);
-                                               if(s[1]=='b' && !isbyte(t))
-                                                   losing++;
-                                               else if(s[1]=='w' && !isword(t))
-                                                   losing++;
-                                       }
-                                       break;
-                                       
-                               case '^':
-                               case 'T':
-                                       if(opP->mode!=IMMED)
-                                           losing++;
-                                       break;
-                                       
-                               case '$':
-                                       if(opP->mode==MSCR || opP->mode==AREG ||
-                                          opP->mode==IMMED || opP->reg==PC || opP->reg==ZPC || opP->mode==REGLST)
-                                           losing++;
-                                       break;
-                                       
-                               case '%':
-                                       if(opP->mode==MSCR || opP->reg==PC ||
-                                          opP->reg==ZPC || opP->mode==REGLST)
-                                           losing++;
-                                       break;
-                                       
-                                       
-                               case '&':
-                                       if(opP->mode==MSCR || opP->mode==DREG ||
-                                          opP->mode==AREG || opP->mode==IMMED || opP->reg==PC || opP->reg==ZPC ||
-                                          opP->mode==AINC || opP->mode==ADEC || opP->mode==REGLST)
-                                           losing++;
-                                       break;
-                                       
-                               case '*':
-                                       if(opP->mode==MSCR || opP->mode==REGLST)
-                                           losing++;
-                                       break;
-                                       
-                               case '+':
-                                       if(opP->mode!=AINC)
-                                           losing++;
-                                       break;
-                                       
-                               case '-':
-                                       if(opP->mode!=ADEC)
-                                           losing++;
-                                       break;
-                                       
-                               case '/':
-                                       if(opP->mode==MSCR || opP->mode==AREG ||
-                                          opP->mode==AINC || opP->mode==ADEC || opP->mode==IMMED || opP->mode==REGLST)
-                                           losing++;
-                                       break;
-                                       
-                               case ';':
-                                       if(opP->mode==MSCR || opP->mode==AREG || opP->mode==REGLST)
-                                           losing++;
-                                       break;
-                                       
-                               case '?':
-                                       if(opP->mode==MSCR || opP->mode==AREG ||
-                                          opP->mode==AINC || opP->mode==ADEC || opP->mode==IMMED || opP->reg==PC ||
-                                          opP->reg==ZPC || opP->mode==REGLST)
-                                           losing++;
-                                       break;
-                                       
-                               case '@':
-                                       if(opP->mode==MSCR || opP->mode==AREG ||
-                                          opP->mode==IMMED || opP->mode==REGLST)
-                                           losing++;
-                                       break;
-                                       
-                               case '~':       /* For now! (JF FOO is this right?) */
-                                       if(opP->mode==MSCR || opP->mode==DREG ||
-                                          opP->mode==AREG || opP->mode==IMMED || opP->reg==PC || opP->reg==ZPC || opP->mode==REGLST)
-                                           losing++;
-                                       break;
-                                       
-                               case 'A':
-                                       if(opP->mode!=AREG)
-                                           losing++;
-                                       break;
-                               case 'a':
-                                       if (opP->mode != AINDR) {
-                                               ++losing;
-                                       }               /* if not address register indirect */
-                                       break;
-                               case 'B':       /* FOO */
-                                       if(opP->mode!=ABSL || (flagseen['S'] && instring[0] == 'j'
-                                                              && instring[1] == 'b'
-                                                              && instring[2] == 's'
-                                                              && instring[3] == 'r'))
-                                           losing++;
-                                       break;
-                                       
-                               case 'C':
-                                       if(opP->mode!=MSCR || opP->reg!=CCR)
-                                           losing++;
-                                       break;
-                                       
-                               case 'd':       /* FOO This mode is a KLUDGE!! */
-                                       if(opP->mode!=AOFF && (opP->mode!=ABSL ||
-                                                              opP->con1->e_beg[0]!='(' || opP->con1->e_end[0]!=')'))
-                                           losing++;
-                                       break;
-                                       
-                               case 'D':
-                                       if(opP->mode!=DREG)
-                                           losing++;
-                                       break;
-                                       
-                               case 'F':
-                                       if(opP->mode!=MSCR || opP->reg<(FPREG+0) || opP->reg>(FPREG+7))
-                                           losing++;
-                                       break;
-                                       
-                               case 'I':
-                                       if(opP->mode!=MSCR || opP->reg<COPNUM ||
-                                          opP->reg>=COPNUM+7)
-                                           losing++;
-                                       break;
-                                       
-                               case 'J':
-                                       if (opP->mode != MSCR
-                                           || opP->reg < USP
-                                           || opP->reg > URP
-                                           || cpu_of_arch(current_architecture) < m68010 /* before 68010 had none */
-                                           || (cpu_of_arch(current_architecture) < m68020
-                                               && opP->reg != SFC
-                                               && opP->reg != DFC
-                                               && opP->reg != USP
-                                               && opP->reg != VBR) /* 68010's had only these */
-                                           || (cpu_of_arch(current_architecture) < m68040
-                                               && opP->reg != SFC
-                                               && opP->reg != DFC
-                                               && opP->reg != USP
-                                               && opP->reg != VBR
-                                               && opP->reg != CACR
-                                               && opP->reg != CAAR
-                                               && opP->reg != MSP
-                                               && opP->reg != ISP) /* 680[23]0's have only these */
-                                           || (cpu_of_arch(current_architecture) == m68040 /* 68040 has all but this */
-                                               && opP->reg == CAAR)) {
-                                               losing++;
-                                       }               /* doesn't cut it */
-                                       break;
-                                       
-                               case 'k':
-                                       if(opP->mode!=IMMED)
-                                           losing++;
-                                       break;
-                                       
-                               case 'l':
-                               case 'L':
-                                       if(opP->mode==DREG || opP->mode==AREG || opP->mode==FPREG) {
-                                               if(s[1]=='8')
-                                                   losing++;
-                                               else {
-                                                       opP->mode=REGLST;
-                                                       opP->reg=1<<(opP->reg-DATA);
-                                               }
-                                       } else if(opP->mode!=REGLST) {
-                                               losing++;
-                                       } else if(s[1]=='8' && opP->reg&0x0FFffFF)
-                                           losing++;
-                                       else if(s[1]=='3' && opP->reg&0x7000000)
-                                           losing++;
-                                       break;
-                                       
-                               case 'M':
-                                       if(opP->mode!=IMMED)
-                                           losing++;
-                                       else {
-                                               long t;
-                                               
-                                               t=get_num(opP->con1,80);
-                                               if(!issbyte(t) || isvar(opP->con1))
-                                                   losing++;
-                                       }
-                                       break;
-                                       
-                               case 'O':
-                                       if(opP->mode!=DREG && opP->mode!=IMMED)
-                                           losing++;
-                                       break;
-                                       
-                               case 'Q':
-                                       if(opP->mode!=IMMED)
-                                           losing++;
-                                       else {
-                                               long t;
-                                               
-                                               t=get_num(opP->con1,80);
-                                               if(t<1 || t>8 || isvar(opP->con1))
-                                                   losing++;
-                                       }
-                                       break;
-                                       
-                               case 'R':
-                                       if(opP->mode!=DREG && opP->mode!=AREG)
-                                           losing++;
-                                       break;
-                                       
-                               case 'r':
-                                       if(opP->mode!=AINDR && opP->mode!=DINDR)
-                                         losing++;
-                                       break;
-
-                               case 's':
-                                       if(opP->mode!=MSCR || !(opP->reg==FPI || opP->reg==FPS || opP->reg==FPC))
-                                           losing++;
-                                       break;
-                                       
-                               case 'S':
-                                       if(opP->mode!=MSCR || opP->reg!=SR)
-                                           losing++;
-                                       break;
-                                       
-                               case 'U':
-                                       if(opP->mode!=MSCR || opP->reg!=USP)
-                                           losing++;
-                                       break;
-                                       
-                                       /* JF these are out of order.  We could put them
-                                          in order if we were willing to put up with
-                                          bunches of #ifdef m68851s in the code */
-#ifndef NO_68851
-                                       /* Memory addressing mode used by pflushr */
-                               case '|':
-                                       if(opP->mode==MSCR || opP->mode==DREG ||
-                                          opP->mode==AREG || opP->mode==REGLST)
-                                           losing++;
-                                       break;
-                                       
-                               case 'f':
-                                       if (opP->mode != MSCR || (opP->reg != SFC && opP->reg != DFC))
-                                           losing++;
-                                       break;
-                                       
-                               case 'P':
-                                       if (opP->mode != MSCR || (opP->reg != TC && opP->reg != CAL &&
-                                                                 opP->reg != VAL && opP->reg != SCC && opP->reg != AC))
-                                           losing++;
-                                       break;
-                                       
-                               case 'V':
-                                       if (opP->reg != VAL)
-                                           losing++;
-                                       break;
-                                       
-                               case 'W':
-                                       if (opP->mode != MSCR || (opP->reg != DRP && opP->reg != SRP &&
-                                                                 opP->reg != CRP))
-                                           losing++;
-                                       break;
-                                       
-                               case 'X':
-                                       if (opP->mode != MSCR ||
-                                           (!(opP->reg >= BAD && opP->reg <= BAD+7) &&
-                                            !(opP->reg >= BAC && opP->reg <= BAC+7)))
-                                           losing++;
-                                       break;
-                                       
-                               case 'Y':
-                                       if (opP->reg != PSR)
-                                           losing++;
-                                       break;
-                                       
-                               case 'Z':
-                                       if (opP->reg != PCSR)
-                                           losing++;
-                                       break;
-#endif
-                               case 'c':
-                                       if (opP->reg != NC
-                                           && opP->reg != IC
-                                           && opP->reg != DC
-                                           && opP->reg != BC) {
-                                               losing++;
-                                       }               /* not a cache specifier. */
-                                       break;
-                                       
-                               case '_':
-                                       if (opP->mode != ABSL) {
-                                               ++losing;
-                                       }               /* not absolute */
-                                       break;
-                                       
-                               default:
-                                       as_fatal("Internal error:  Operand mode %c unknown in line %s of file \"%s\"",
-                                                *s, __LINE__, __FILE__);
-                               }               /* switch on type of operand */
-                               
-                               if (losing) break;
-                       }                       /* for each operand */
-               }                       /* if immediately wrong */
-               
-               if (!losing) {
-                       break;
-               }                       /* got it. */
-               
-               
-               if (!opcode->m_next) 
-                   {
-                           if ((opcode->m_arch & current_architecture) == 0) 
-                               {
-                                       the_ins.error = "Opcode not available on architecture specified";
-                                       addword(0);
-                                       
-                               } 
-                           else
-                               {
-                                       the_ins.error = "instruction/operands mismatch";
-                               }
-                           
-                           return;
-                   }                           /* Fell off the end */
-               opcode = opcode->m_next;                
-               losing = 0;
-       }
-       
-       /* now assemble it */
-       
-       the_ins.args=opcode->m_operands;
-       the_ins.numargs=opcode->m_opnum;
-       the_ins.numo=opcode->m_codenum;
-       the_ins.opcode[0]=getone(opcode);
-       the_ins.opcode[1]=gettwo(opcode);
-       
-       for (s = the_ins.args, opP = &the_ins.operands[0]; *s; s += 2, opP++) {
-               /* This switch is a doozy.
-                  Watch the first step; its a big one! */
-               switch(s[0]) {
-                       
-               case '*':
-               case '~':
-               case '%':
-               case ';':
-               case '@':
-               case '!':
-               case '&':
-               case '$':
-               case '?':
-               case '/':
-#ifndef NO_68851
-               case '|':
-#endif
-                       switch(opP->mode) {
-                       case IMMED:
-                               tmpreg=0x3c;    /* 7.4 */
-                               if (strchr("bwl",s[1])) nextword=get_num(opP->con1,80);
-                               else nextword=nextword=get_num(opP->con1,0);
-                               if(isvar(opP->con1))
-                                   add_fix(s[1],opP->con1,0);
-                               switch(s[1]) {
-                               case 'b':
-                                       if(!isbyte(nextword))
-                                           opP->error="operand out of range";
-                                       addword(nextword);
-                                       baseo=0;
-                                       break;
-                               case 'w':
-                                       if(!isword(nextword))
-                                           opP->error="operand out of range";
-                                       addword(nextword);
-                                       baseo=0;
-                                       break;
-                               case 'l':
-                                       addword(nextword>>16);
-                                       addword(nextword);
-                                       baseo=0;
-                                       break;
-                                       
-                               case 'f':
-                                       baseo=2;
-                                       outro=8;
-                                       break;
-                               case 'F':
-                                       baseo=4;
-                                       outro=11;
-                                       break;
-                               case 'x':
-                                       baseo=6;
-                                       outro=15;
-                                       break;
-                               case 'p':
-                                       baseo=6;
-                                       outro= -1;
-                                       break;
-                               default:
-                                       as_fatal("Internal error:  Can't decode %c%c in line %s of file \"%s\"",
-                                                *s, s[1], __LINE__, __FILE__);
-                               }
-                               if(!baseo)
-                                   break;
-                               
-                               /* We gotta put out some float */
-                               if(seg(opP->con1)!=SEG_BIG) {
-                                       int_to_gen(nextword);
-                                       gen_to_words(words,baseo,(long int)outro);
-                                       for(wordp=words;baseo--;wordp++)
-                                           addword(*wordp);
-                                       break;
-                               }               /* Its BIG */
-                               if(offs(opP->con1)>0) {
-                                       as_warn("Bignum assumed to be binary bit-pattern");
-                                       if(offs(opP->con1)>baseo) {
-                                               as_warn("Bignum too big for %c format; truncated",s[1]);
-                                               offs(opP->con1)=baseo;
-                                       }
-                                       baseo-=offs(opP->con1);
-                                       for(wordp=generic_bignum+offs(opP->con1)-1;offs(opP->con1)--;--wordp)
-                                           addword(*wordp);
-                                       while(baseo--)
-                                           addword(0);
-                                       break;
-                               }
-                               gen_to_words(words,baseo,(long)outro);
-                               for (wordp=words;baseo--;wordp++)
-                                   addword(*wordp);
-                               break;
-                       case DREG:
-                               tmpreg=opP->reg-DATA; /* 0.dreg */
-                               break;
-                       case AREG:
-                               tmpreg=0x08+opP->reg-ADDR; /* 1.areg */
-                               break;
-                       case AINDR:
-                               tmpreg=0x10+opP->reg-ADDR; /* 2.areg */
-                               break;
-                       case ADEC:
-                               tmpreg=0x20+opP->reg-ADDR; /* 4.areg */
-                               break;
-                       case AINC:
-                               tmpreg=0x18+opP->reg-ADDR; /* 3.areg */
-                               break;
-                       case AOFF:
-                               
-                               nextword=get_num(opP->con1,80);
-                               /* Force into index mode.  Hope this works */
-                               
-                               /* We do the first bit for 32-bit displacements,
-                                  and the second bit for 16 bit ones.  It is
-                                  possible that we should make the default be
-                                  WORD instead of LONG, but I think that'd
-                                  break GCC, so we put up with a little
-                                  inefficiency for the sake of working output.
-                                  */
-                               
-                               if(   !issword(nextword)
-                                  || (   isvar(opP->con1)
-                                      && (  (   opP->con1->e_siz==0
-                                             && flagseen['l']==0)
-                                          || opP->con1->e_siz==3))) {
-                                       
-                                       if(opP->reg==PC)
-                                           tmpreg=0x3B;        /* 7.3 */
-                                       else
-                                           tmpreg=0x30+opP->reg-ADDR; /* 6.areg */
-                                       if(isvar(opP->con1)) {
-                                               if(opP->reg==PC) {
-                                                       add_frag(adds(opP->con1),
-                                                                offs(opP->con1),
-                                                                TAB(PCLEA,SZ_UNDEF));
-                                                       break;
-                                               } else {
-                                                       addword(0x0170);
-                                                       add_fix('l',opP->con1,1);
-                                               }
-                                       } else
-                                           addword(0x0170);
-                                       addword(nextword>>16);
-                               } else {
-                                       if(opP->reg==PC)
-                                           tmpreg=0x3A; /* 7.2 */
-                                       else
-                                           tmpreg=0x28+opP->reg-ADDR; /* 5.areg */
-                                       
-                                       if(isvar(opP->con1)) {
-                                               if(opP->reg==PC) {
-                                                       add_fix('w',opP->con1,1);
-                                               } else
-                                                   add_fix('w',opP->con1,0);
-                                       }
-                               }
-                               addword(nextword);
-                               break;
-                               
-                       case APODX:
-                       case AMIND:
-                       case APRDX:
-                               know(current_architecture & m68020up);
-                               /* intentional fall-through */
-                       case AINDX:
-                               nextword=0;
-                               baseo=get_num(opP->con1,80);
-                               outro=get_num(opP->con2,80);
-                               /* Figure out the 'addressing mode' */
-                               /* Also turn on the BASE_DISABLE bit, if needed */
-                               if(opP->reg==PC || opP->reg==ZPC) {
-                                       tmpreg=0x3b;    /* 7.3 */
-                                       if(opP->reg==ZPC)
-                                           nextword|=0x80;
-                               } else if(opP->reg==FAIL) {
-                                       nextword|=0x80;
-                                       tmpreg=0x30; /* 6.garbage */
-                               } else tmpreg=0x30+opP->reg-ADDR; /* 6.areg */
-                               
-                               siz1= (opP->con1) ? opP->con1->e_siz : 0;
-                               siz2= (opP->con2) ? opP->con2->e_siz : 0;
-                               
-                               /* Index register stuff */
-                               if(opP->ireg>=DATA+0 && opP->ireg<=ADDR+7) {
-                                       nextword|=(opP->ireg-DATA)<<12;
-                                       
-                                       if(opP->isiz==0 || opP->isiz==3)
-                                           nextword|=0x800;
-                                       switch(opP->imul) {
-                                       case 1: break;
-                                       case 2: nextword|=0x200; break;
-                                       case 4: nextword|=0x400; break;
-                                       case 8: nextword|=0x600; break;
-                                       default: as_fatal("failed sanity check.");
-                                       }
-                                       /* IF its simple,
-                                          GET US OUT OF HERE! */
-                                       
-                                       /* Must be INDEX, with an index
-                                          register.  Address register
-                                          cannot be ZERO-PC, and either
-                                          :b was forced, or we know
-                                          it will fit */
-                                       if(   opP->mode==AINDX
-                                          && opP->reg!=FAIL
-                                          && opP->reg!=ZPC
-                                          && (   siz1==1
-                                              || (   issbyte(baseo)
-                                                  && !isvar(opP->con1)))) {
-                                               nextword +=baseo&0xff;
-                                               addword(nextword);
-                                               if(isvar(opP->con1))
-                                                   add_fix('B',opP->con1,0);
-                                               break;
-                                       }
-                               } else
-                                   nextword|=0x40; /* No index reg */
-                               
-                               /* It aint simple */
-                               nextword|=0x100;
-                               /* If the guy specified a width, we assume that
-                                  it is wide enough.  Maybe it isn't.  If so, we lose
-                                  */
-                               switch(siz1) {
-                               case 0:
-                                       if(isvar(opP->con1) || !issword(baseo)) {
-                                               siz1=3;
-                                               nextword|=0x30;
-                                       } else if(baseo==0)
-                                           nextword|=0x10;
-                                       else {  
-                                               nextword|=0x20;
-                                               siz1=2;
-                                       }
-                                       break;
-                               case 1:
-                                       as_warn("Byte dispacement won't work.  Defaulting to :w");
-                               case 2:
-                                       nextword|=0x20;
-                                       break;
-                               case 3:
-                                       nextword|=0x30;
-                                       break;
-                               }
-                               
-                               /* Figure out innner displacement stuff */
-                               if(opP->mode!=AINDX) {
-                                       switch(siz2) {
-                                       case 0:
-                                               if(isvar(opP->con2) || !issword(outro)) {
-                                                       siz2=3;
-                                                       nextword|=0x3;
-                                               } else if(outro==0)
-                                                   nextword|=0x1;
-                                               else {  
-                                                       nextword|=0x2;
-                                                       siz2=2;
-                                               }
-                                               break;
-                                       case 1:
-                                               as_warn("Byte dispacement won't work.  Defaulting to :w");
-                                       case 2:
-                                               nextword|=0x2;
-                                               break;
-                                       case 3:
-                                               nextword|=0x3;
-                                               break;
-                                       }
-                                       if(opP->mode==APODX) nextword|=0x04;
-                                       else if(opP->mode==AMIND) nextword|=0x40;
-                               }
-                               addword(nextword);
-                               
-                               if(isvar(opP->con1)) {
-                                       if(opP->reg==PC || opP->reg==ZPC) {
-                                               add_fix(siz1==3 ? 'l' : 'w',opP->con1,1);
-                                               opP->con1->e_exp.X_add_number+=6;
-                                       } else
-                                           add_fix(siz1==3 ? 'l' : 'w',opP->con1,0);
-                               }
-                               if(siz1==3)
-                                   addword(baseo>>16);
-                               if(siz1)
-                                   addword(baseo);
-                               
-                               if(isvar(opP->con2)) {
-                                       if(opP->reg==PC || opP->reg==ZPC) {
-                                               add_fix(siz2==3 ? 'l' : 'w',opP->con2,1);
-                                               opP->con1->e_exp.X_add_number+=6;
-                                       } else
-                                           add_fix(siz2==3 ? 'l' : 'w',opP->con2,0);
-                               }
-                               if(siz2==3)
-                                   addword(outro>>16);
-                               if(siz2)
-                                   addword(outro);
-                               
-                               break;
-                               
-                       case ABSL:
-                               nextword=get_num(opP->con1,80);
-                               switch(opP->con1->e_siz) {
-                               default:
-                                       as_warn("Unknown size for absolute reference");
-                               case 0:
-                                       if(!isvar(opP->con1) && issword(offs(opP->con1))) {
-                                               tmpreg=0x38; /* 7.0 */
-                                               addword(nextword);
-                                               break;
-                                       }
-                                       /* Don't generate pc relative code
-                                          on 68010 and 68000 */
-                                       if(isvar(opP->con1)
-                                          && !subs(opP->con1)
-                                          && seg(opP->con1) == SEG_TEXT
-                                          && now_seg == SEG_TEXT
-                                          && cpu_of_arch(current_architecture) < m68020
-                                          && !flagseen['S']
-                                          && !strchr("~%&$?", s[0])) {
-                                               tmpreg=0x3A; /* 7.2 */
-                                               add_frag(adds(opP->con1),
-                                                        offs(opP->con1),
-                                                        TAB(PCREL,SZ_UNDEF));
-                                               break;
-                                       }
-                               case 3:         /* Fall through into long */
-                                       if(isvar(opP->con1))
-                                           add_fix('l',opP->con1,0);
-                                       
-                                       tmpreg=0x39;    /* 7.1 mode */
-                                       addword(nextword>>16);
-                                       addword(nextword);
-                                       break;
-                                       
-                               case 2:         /* Word */
-                                       if(isvar(opP->con1))
-                                           add_fix('w',opP->con1,0);
-                                       
-                                       tmpreg=0x38;    /* 7.0 mode */
-                                       addword(nextword);
-                                       break;
-                               }
-                               break;
-                       case DINDR:
-                               as_bad("invalid indirect register");
-                               break;
-                       case MSCR:
-                       default:
-                               as_bad("unknown/incorrect operand");
-                               /* abort(); */
-                       }
-                       install_gen_operand(s[1],tmpreg);
-                       break;
-                       
-               case '#':
-               case '^':
-                       switch(s[1]) {  /* JF: I hate floating point! */
-                       case 'j':
-                               tmpreg=70;
-                               break;
-                       case '8':
-                               tmpreg=20;
-                               break;
-                       case 'C':
-                               tmpreg=50;
-                               break;
-                       case '3':
-                       default:
-                               tmpreg=80;
-                               break;
-                       }
-                       tmpreg=get_num(opP->con1,tmpreg);
-                       if(isvar(opP->con1))
-                           add_fix(s[1],opP->con1,0);
-                       switch(s[1]) {
-                       case 'b':       /* Danger:  These do no check for
-                                          certain types of overflow.
-                                          user beware! */
-                               if(!isbyte(tmpreg))
-                                   opP->error="out of range";
-                               insop(tmpreg);
-                               if(isvar(opP->con1))
-                                   the_ins.reloc[the_ins.nrel-1].n=(opcode->m_codenum)*2;
-                               break;
-                       case 'w':
-                               if(!isword(tmpreg))
-                                   opP->error="out of range";
-                               insop(tmpreg);
-                               if(isvar(opP->con1))
-                                   the_ins.reloc[the_ins.nrel-1].n=(opcode->m_codenum)*2;
-                               break;
-                       case 'l':
-                               insop(tmpreg);          /* Because of the way insop works, we put these two out backwards */
-                               insop(tmpreg>>16);
-                               if(isvar(opP->con1))
-                                   the_ins.reloc[the_ins.nrel-1].n=(opcode->m_codenum)*2;
-                               break;
-                       case '3':
-                               tmpreg&=0xFF;
-                       case '8':
-                       case 'C':
-                               install_operand(s[1],tmpreg);
-                               break;
-                       default:
-                               as_fatal("Internal error:  Unknown mode #%c in line %s of file \"%s\"", s[1], __LINE__, __FILE__);
-                       }
-                       break;
-                       
-               case '+':
-               case '-':
-               case 'A':
-               case 'a':
-                       install_operand(s[1],opP->reg-ADDR);
-                       break;
-                       
-               case 'B':
-                       tmpreg=get_num(opP->con1,80);
-                       switch(s[1]) {
-                       case 'B':
-                               /* Needs no offsetting */
-                               add_fix('B',opP->con1,1);
-                               break;
-                       case 'W':
-                               /* Offset the displacement to be relative to byte disp location */
-                               opP->con1->e_exp.X_add_number+=2;
-                               add_fix('w',opP->con1,1);
-                               addword(0);
-                               break;
-                       case 'L':
-                       long_branch:
-                               if (cpu_of_arch(current_architecture) < m68020)         /* 68000 or 010 */
-                                   as_warn("Can't use long branches on 68000/68010");
-                               the_ins.opcode[the_ins.numo-1]|=0xff;
-                               /* Offset the displacement to be relative to byte disp location */
-                               opP->con1->e_exp.X_add_number+=4;
-                               add_fix('l',opP->con1,1);
-                               addword(0);
-                               addword(0);
-                               break;
-                       case 'g':
-                               if(subs(opP->con1))      /* We can't relax it */
-                                   goto long_branch;
-                               
-                               /* This could either be a symbol, or an
-                                  absolute address.  No matter, the
-                                  frag hacking will finger it out.
-                                  Not quite: it can't switch from
-                                  BRANCH to BCC68000 for the case
-                                  where opnd is absolute (it needs
-                                  to use the 68000 hack since no
-                                  conditional abs jumps).  */
-                               if (((cpu_of_arch(current_architecture) < m68020) || (0==adds(opP->con1)))
-                                   && (the_ins.opcode[0] >= 0x6200)
-                                   && (the_ins.opcode[0] <= 0x6f00)) {
-                                       add_frag(adds(opP->con1),offs(opP->con1),TAB(BCC68000,SZ_UNDEF));
-                               } else {
-                                       add_frag(adds(opP->con1),offs(opP->con1),TAB(BRANCH,SZ_UNDEF));
-                               }
-                               break;
-                       case 'w':
-                               if(isvar(opP->con1)) {
-                                       /* check for DBcc instruction */
-                                       if ((the_ins.opcode[0] & 0xf0f8) ==0x50c8) {
-                                               /* size varies if patch */
-                                               /* needed for long form */
-                                               add_frag(adds(opP->con1),offs(opP->con1),TAB(DBCC,SZ_UNDEF));
-                                               break;
-                                       }
-                                       
-                                       /* Don't ask! */
-                                       opP->con1->e_exp.X_add_number+=2;
-                                       add_fix('w',opP->con1,1);
-                               }
-                               addword(0);
-                               break;
-                       case 'C':               /* Fixed size LONG coproc branches */
-                               the_ins.opcode[the_ins.numo-1]|=0x40;
-                               /* Offset the displacement to be relative to byte disp location */
-                               /* Coproc branches don't have a byte disp option, but they are
-                                  compatible with the ordinary branches, which do... */
-                               opP->con1->e_exp.X_add_number+=4;
-                               add_fix('l',opP->con1,1);
-                               addword(0);
-                               addword(0);
-                               break;
-                       case 'c':               /* Var size Coprocesssor branches */
-                               if(subs(opP->con1)) {
-                                       add_fix('l',opP->con1,1);
-                                       add_frag((symbolS *)0,(long)0,TAB(FBRANCH,LONG));
-                               } else if(adds(opP->con1)) {
-                                       add_frag(adds(opP->con1),offs(opP->con1),TAB(FBRANCH,SZ_UNDEF));
-                               } else {
-                                       /* add_frag((symbolS *)0,offs(opP->con1),TAB(FBRANCH,SHORT)); */
-                                       the_ins.opcode[the_ins.numo-1]|=0x40;
-                                       add_fix('l',opP->con1,1);
-                                       addword(0);
-                                       addword(4);
-                               }
-                               break;
-                       default:
-                               as_fatal("Internal error:  operand type B%c unknown in line %s of file \"%s\"",
-                                        s[1], __LINE__, __FILE__);
-                       }
-                       break;
-                       
-               case 'C':               /* Ignore it */
-                       break;
-                       
-               case 'd':               /* JF this is a kludge */
-                       if(opP->mode==AOFF) {
-                               install_operand('s',opP->reg-ADDR);
-                       } else {
-                               char *tmpP;
-                               
-                               tmpP=opP->con1->e_end-2;
-                               opP->con1->e_beg++;
-                               opP->con1->e_end-=4;    /* point to the , */
-                               baseo=m68k_reg_parse(&tmpP);
-                               if(baseo<ADDR+0 || baseo>ADDR+7) {
-                                       as_bad("Unknown address reg, using A0");
-                                       baseo=0;
-                               } else baseo-=ADDR;
-                               install_operand('s',baseo);
-                       }
-                       tmpreg=get_num(opP->con1,80);
-                       if(!issword(tmpreg)) {
-                               as_warn("Expression out of range, using 0");
-                               tmpreg=0;
-                       }
-                       addword(tmpreg);
-                       break;
-                       
-               case 'D':
-                       install_operand(s[1],opP->reg-DATA);
-                       break;
-                       
-               case 'F':
-                       install_operand(s[1],opP->reg-FPREG);
-                       break;
-                       
-               case 'I':
-                       tmpreg=1+opP->reg-COPNUM;
-                       if(tmpreg==8)
-                           tmpreg=0;
-                       install_operand(s[1],tmpreg);
-                       break;
-                       
-               case 'J':               /* JF foo */
-                       switch(opP->reg) {
-                       case SFC:   tmpreg=0x000; break;
-                       case DFC:   tmpreg=0x001; break;
-                       case CACR:  tmpreg=0x002; break;
-                       case TC:    tmpreg=0x003; break;
-                       case ITT0:  tmpreg=0x004; break;
-                       case ITT1:  tmpreg=0x005; break;
-                       case DTT0:  tmpreg=0x006; break;
-                       case DTT1:  tmpreg=0x007; break;
-                               
-                       case USP:   tmpreg=0x800; break;
-                       case VBR:   tmpreg=0x801; break;
-                       case CAAR:  tmpreg=0x802; break;
-                       case MSP:   tmpreg=0x803; break;
-                       case ISP:   tmpreg=0x804; break;
-                       case MMUSR: tmpreg=0x805; break;
-                       case URP:   tmpreg=0x806; break;
-                       case SRP:   tmpreg=0x807; break;
-                       default:
-                               as_fatal("failed sanity check.");
-                       }
-                       install_operand(s[1],tmpreg);
-                       break;
-                       
-               case 'k':
-                       tmpreg=get_num(opP->con1,55);
-                       install_operand(s[1],tmpreg&0x7f);
-                       break;
-                       
-               case 'l':
-                       tmpreg=opP->reg;
-                       if(s[1]=='w') {
-                               if(tmpreg&0x7FF0000)
-                                   as_bad("Floating point register in register list");
-                               insop(reverse_16_bits(tmpreg));
-                       } else {
-                               if(tmpreg&0x700FFFF)
-                                   as_bad("Wrong register in floating-point reglist");
-                               install_operand(s[1],reverse_8_bits(tmpreg>>16));
-                       }
-                       break;
-                       
-               case 'L':
-                       tmpreg=opP->reg;
-                       if(s[1]=='w') {
-                               if(tmpreg&0x7FF0000)
-                                   as_bad("Floating point register in register list");
-                               insop(tmpreg);
-                       } else if(s[1]=='8') {
-                               if(tmpreg&0x0FFFFFF)
-                                   as_bad("incorrect register in reglist");
-                               install_operand(s[1],tmpreg>>24);
-                       } else {
-                               if(tmpreg&0x700FFFF)
-                                   as_bad("wrong register in floating-point reglist");
-                               else
-                                   install_operand(s[1],tmpreg>>16);
-                       }
-                       break;
-                       
-               case 'M':
-                       install_operand(s[1],get_num(opP->con1,60));
-                       break;
-                       
-               case 'O':
-                       tmpreg= (opP->mode==DREG)
-                           ? 0x20+opP->reg-DATA
-                               : (get_num(opP->con1,40)&0x1F);
-                       install_operand(s[1],tmpreg);
-                       break;
-                       
-               case 'Q':
-                       tmpreg=get_num(opP->con1,10);
-                       if(tmpreg==8)
-                           tmpreg=0;
-                       install_operand(s[1],tmpreg);
-                       break;
-                       
-               case 'R':
-               case 'r':
-                       /* This depends on the fact that ADDR registers are
-                          eight more than their corresponding DATA regs, so
-                          the result will have the ADDR_REG bit set */
-                       install_operand(s[1],opP->reg-DATA);
-                       break;
-                       
-               case 's':
-                       if(opP->reg==FPI) tmpreg=0x1;
-                       else if(opP->reg==FPS) tmpreg=0x2;
-                       else if(opP->reg==FPC) tmpreg=0x4;
-                       else as_fatal("failed sanity check.");
-                       install_operand(s[1],tmpreg);
-                       break;
-                       
-               case 'S':       /* Ignore it */
-                       break;
-                       
-               case 'T':
-                       install_operand(s[1],get_num(opP->con1,30));
-                       break;
-                       
-               case 'U':       /* Ignore it */
-                       break;
-                       
-               case 'c':
-                       switch (opP->reg) {
-                       case NC: tmpreg = 0; break;
-                       case DC: tmpreg = 1; break;
-                       case IC: tmpreg = 2; break;
-                       case BC: tmpreg = 3; break;
-                       default:
-                               as_fatal("failed sanity check");
-                       } /* switch on cache token */
-                       install_operand(s[1], tmpreg);
-                       break;
-#ifndef NO_68851
-                       /* JF: These are out of order, I fear. */
-               case 'f':
-                       switch (opP->reg) {
-                       case SFC:
-                               tmpreg=0;
-                               break;
-                       case DFC:
-                               tmpreg=1;
-                               break;
-                       default:
-                               as_fatal("failed sanity check.");
-                       }
-                       install_operand(s[1],tmpreg);
-                       break;
-                       
-               case 'P':
-                       switch(opP->reg) {
-                       case TC:
-                               tmpreg=0;
-                               break;
-                       case CAL:
-                               tmpreg=4;
-                               break;
-                       case VAL:
-                               tmpreg=5;
-                               break;
-                       case SCC:
-                               tmpreg=6;
-                               break;
-                       case AC:
-                               tmpreg=7;
-                               break;
-                       default:
-                               as_fatal("failed sanity check.");
-                       }
-                       install_operand(s[1],tmpreg);
-                       break;
-                       
-               case 'V':
-                       if (opP->reg == VAL)
-                           break;
-                       as_fatal("failed sanity check.");
-                       
-               case 'W':
-                       switch(opP->reg) {
-                               
-                       case DRP:
-                               tmpreg=1;
-                               break;
-                       case SRP:
-                               tmpreg=2;
-                               break;
-                       case CRP:
-                               tmpreg=3;
-                               break;
-                       default:
-                               as_fatal("failed sanity check.");
-                       }
-                       install_operand(s[1],tmpreg);
-                       break;
-                       
-               case 'X':
-                       switch (opP->reg) {
-                       case BAD: case BAD+1: case BAD+2: case BAD+3:
-                       case BAD+4: case BAD+5: case BAD+6: case BAD+7:
-                               tmpreg = (4 << 10) | ((opP->reg - BAD) << 2);
-                               break;
-                               
-                       case BAC: case BAC+1: case BAC+2: case BAC+3:
-                       case BAC+4: case BAC+5: case BAC+6: case BAC+7:
-                               tmpreg = (5 << 10) | ((opP->reg - BAC) << 2);
-                               break;
-                               
-                       default:
-                               as_fatal("failed sanity check.");
-                       }
-                       install_operand(s[1], tmpreg);
-                       break;
-               case 'Y':
-                       know(opP->reg == PSR);
-                       break;
-               case 'Z':
-                       know(opP->reg == PCSR);
-                       break;
-#endif /* m68851 */
-               case '_':
-                       tmpreg=get_num(opP->con1,80);
-                       install_operand(s[1], tmpreg);
-                       break;
-               default:
-                       as_fatal("Internal error:  Operand type %c unknown in line %s of file \"%s\"", s[0], __LINE__, __FILE__);
-               }
-       }
-       /* By the time whe get here (FINALLY) the_ins contains the complete
-          instruction, ready to be emitted. . . */
-} /* m68k_ip() */
-
-/*
- * get_regs := '/' + ?
- *     | '-' + <register>
- *     | '-' + <register> + ?
- *     | <empty>
- *     ;
- *
- * The idea here must be to scan in a set of registers but I don't
- * understand it.  Looks awfully sloppy to me but I don't have any doc on
- * this format so...
- * 
- *
- */
-
-static int get_regs(i,str,opP)
-int i;
-struct m68k_op *opP;
-char *str;
-{
-       /*                           26, 25, 24, 23-16,  15-8, 0-7 */
-       /* Low order 24 bits encoded fpc,fps,fpi,fp7-fp0,a7-a0,d7-d0 */
-       unsigned long cur_regs = 0;
-       int     reg1,
-       reg2;
-       
-#define ADD_REG(x)     {     if(x==FPI) cur_regs|=(1<<24);\
-else if(x==FPS) cur_regs|=(1<<25);\
-else if(x==FPC) cur_regs|=(1<<26);\
-else cur_regs|=(1<<(x-1));  }
-       
-       reg1=i;
-       for(;;) {
-               if(*str=='/') {
-                       ADD_REG(reg1);
-                       str++;
-               } else if(*str=='-') {
-                       str++;
-                       reg2=m68k_reg_parse(&str);
-                       if(reg2<DATA || reg2>=FPREG+8 || reg1==FPI || reg1==FPS || reg1==FPC) {
-                               opP->error="unknown register in register list";
-                               return FAIL;
-                       }
-                       while(reg1<=reg2) {
-                               ADD_REG(reg1);
-                               reg1++;
-                       }
-                       if(*str=='\0')
-                           break;
-               } else if(*str=='\0') {
-                       ADD_REG(reg1);
-                       break;
-               } else {
-                       opP->error="unknow character in register list";
-                       return FAIL;
-               }
-               /* DJA -- Bug Fix.  Did't handle d1-d2/a1 until the following instruction was added */
-               if (*str=='/')
-                   str ++;
-               reg1=m68k_reg_parse(&str);
-               if((reg1<DATA || reg1>=FPREG+8) && !(reg1==FPI || reg1==FPS || reg1==FPC)) {
-                       opP->error="unknown register in register list";
-                       return FAIL;
-               }
-       }
-       opP->reg=cur_regs;
-       return OK;
-} /* get_regs() */
-
-static int reverse_16_bits(in)
-int in;
-{
-       int out=0;
-       int n;
-       
-       static int mask[16] = {
-               0x0001,0x0002,0x0004,0x0008,0x0010,0x0020,0x0040,0x0080,
-               0x0100,0x0200,0x0400,0x0800,0x1000,0x2000,0x4000,0x8000
-           };
-       for(n=0;n<16;n++) {
-               if(in&mask[n])
-                   out|=mask[15-n];
-       }
-       return out;
-} /* reverse_16_bits() */
-
-static int reverse_8_bits(in)
-int in;
-{
-       int out=0;
-       int n;
-       
-       static int mask[8] = {
-               0x0001,0x0002,0x0004,0x0008,0x0010,0x0020,0x0040,0x0080,
-       };
-       
-       for(n=0;n<8;n++) {
-               if(in&mask[n])
-                   out|=mask[7-n];
-       }
-       return out;
-} /* reverse_8_bits() */
-
-static void install_operand(mode,val)
-int mode;
-int val;
-{
-       switch(mode) {
-       case 's':
-               the_ins.opcode[0]|=val & 0xFF;  /* JF FF is for M kludge */
-               break;
-       case 'd':
-               the_ins.opcode[0]|=val<<9;
-               break;
-       case '1':
-               the_ins.opcode[1]|=val<<12;
-               break;
-       case '2':
-               the_ins.opcode[1]|=val<<6;
-               break;
-       case '3':
-               the_ins.opcode[1]|=val;
-               break;
-       case '4':
-               the_ins.opcode[2]|=val<<12;
-               break;
-       case '5':
-               the_ins.opcode[2]|=val<<6;
-               break;
-       case '6':
-               /* DANGER!  This is a hack to force cas2l and cas2w cmds
-                  to be three words long! */
-               the_ins.numo++;
-               the_ins.opcode[2]|=val;
-               break;
-       case '7':
-               the_ins.opcode[1]|=val<<7;
-               break;
-       case '8':
-               the_ins.opcode[1]|=val<<10;
-               break;
-#ifndef NO_68851
-       case '9':
-               the_ins.opcode[1]|=val<<5;
-               break;
-#endif
-               
-       case 't':
-               the_ins.opcode[1]|=(val<<10)|(val<<7);
-               break;
-       case 'D':
-               the_ins.opcode[1]|=(val<<12)|val;
-               break;
-       case 'g':
-               the_ins.opcode[0]|=val=0xff;
-               break;
-       case 'i':
-               the_ins.opcode[0]|=val<<9;
-               break;
-       case 'C':
-               the_ins.opcode[1]|=val;
-               break;
-       case 'j':
-               the_ins.opcode[1]|=val;
-               the_ins.numo++;         /* What a hack */
-               break;
-       case 'k':
-               the_ins.opcode[1]|=val<<4;
-               break;
-       case 'b':
-       case 'w':
-       case 'l':
-               break;
-       case 'e':
-               the_ins.opcode[0] |= (val << 6);
-               break;
-       case 'L':
-               the_ins.opcode[1] = (val >> 16);
-               the_ins.opcode[2] = val & 0xffff;
-               break;
-       case 'c':
-       default:
-               as_fatal("failed sanity check.");
-       }
-} /* install_operand() */
-
-static void install_gen_operand(mode,val)
-int mode;
-int val;
-{
-       switch(mode) {
-       case 's':
-               the_ins.opcode[0]|=val;
-               break;
-       case 'd':
-               /* This is a kludge!!! */
-               the_ins.opcode[0]|=(val&0x07)<<9|(val&0x38)<<3;
-               break;
-       case 'b':
-       case 'w':
-       case 'l':
-       case 'f':
-       case 'F':
-       case 'x':
-       case 'p':
-               the_ins.opcode[0]|=val;
-               break;
-               /* more stuff goes here */
-       default:
-               as_fatal("failed sanity check.");
-       }
-} /* install_gen_operand() */
-
-/*
- * verify that we have some number of paren pairs, do m68k_ip_op(), and
- * then deal with the bitfield hack.
- */
-
-static char *crack_operand(str,opP)
-register char *str;
-register struct m68k_op *opP;
-{
-       register int parens;
-       register int c;
-       register char *beg_str;
-       
-       if(!str) {
-               return str;
-       }
-       beg_str=str;
-       for(parens=0;*str && (parens>0 || notend(str));str++) {
-               if(*str=='(') parens++;
-               else if(*str==')') {
-                       if(!parens) {           /* ERROR */
-                               opP->error="Extra )";
-                               return str;
-                       }
-                       --parens;
-               }
-       }
-       if(!*str && parens) {           /* ERROR */
-               opP->error="Missing )";
-               return str;
-       }
-       c= *str;
-       *str='\0';
-       if(m68k_ip_op(beg_str,opP)==FAIL) {
-               *str=c;
-               return str;
-       }
-       *str=c;
-       
-       if(c=='}')
-           c= *++str;          /* JF bitfield hack */
-       
-       if(c) {
-               c= *++str;
-               if(!c)
-                   as_bad("Missing operand");
-       }
-       return str;
-}
-
-/* See the comment up above where the #define notend(... is */
-#if 0
-notend(s)
-char *s;
-{
-       if(*s==',') return 0;
-       if(*s=='{' || *s=='}')
-           return 0;
-       if(*s!=':') return 1;
-       /* This kludge here is for the division cmd, which is a kludge */
-       if(index("aAdD#(",s[1])) return 0;
-       return 1;
-}
-#endif
-
-
-int done_pseudo(str)
-char *str;
-{
-       extern struct hash_control * po_hash;
-       char *ptr = str;
-       char *null_ptr;
-       pseudo_typeS *  pop;
-       
-       char c;
-       
-       is_end_of_line[0] = 1;
-       /* Skip over name of pseudo, change to lower case */
-       while (isalpha(*ptr) || *ptr == '.') 
-           {
-                   if (isupper(*ptr)) {
-                           *ptr = tolower(*ptr);
-                   }
-                   ptr++;
-           }
-       null_ptr = ptr;
-       c = *null_ptr;
-       *null_ptr = 0;
-       
-       
-       pop = (pseudo_typeS *)hash_find(po_hash, str);
-       
-       *null_ptr = c;
-       if (pop != (pseudo_typeS *)NULL) 
-           {
-                   input_line_pointer = null_ptr+1;
-                   SKIP_WHITESPACE();
-                   /* Now we point to first non-blank char after pseudo op */
-                   (*pop->poc_handler)(pop->poc_val);
-                   input_line_pointer--;
-                   
-                   return 1;
-                   
-           }
-       /* Just put back the char where the null was put and return as if nothing had happened */
-       
-       *null_ptr = c;
-       return 0;
-       
-}
-
-
-/* This is the guts of the machine-dependent assembler.  STR points to a
-   machine dependent instruction.  This function is supposed to emit
-   the frags/bytes it assembles to.
-   */
-void
-    md_assemble(str)
-char *str;
-{
-       char *er;
-       short   *fromP;
-       char    *toP = NULL;
-       int     m,n = 0;
-       char    *to_beg_P;
-       int     shorts_this_frag;
-       
-       /*  if (done_pseudo(str)) return ;*/
-       
-       
-       
-       if (current_architecture == 0) {
-               current_architecture = (m68020
-#ifndef NO_68881
-                                       | m68881
-#endif
-#ifndef NO_68851
-                                       | m68851
-#endif
-                                       );
-       } /* default current_architecture */
-       
-       memset((char *)(&the_ins), '\0', sizeof(the_ins)); /* JF for paranoia sake */
-       
-       m68k_ip(str);
-       er=the_ins.error;
-       if(!er) {
-               for(n=the_ins.numargs;n;--n)
-                   if(the_ins.operands[n].error) {
-                           er=the_ins.operands[n].error;
-                           break;
-                   }
-       }
-       if(er) {
-               as_bad("\"%s\" -- Statement '%s' ignored",er,str);
-               return;
-       }
-       
-       if(the_ins.nfrag==0) { /* No frag hacking involved; just put it out */
-               toP=frag_more(2*the_ins.numo);
-               fromP= &the_ins.opcode[0];
-               for(m=the_ins.numo;m;--m) {
-                       md_number_to_chars(toP,(long)(*fromP),2);
-                       toP+=2;
-                       fromP++;
-               }
-               /* put out symbol-dependent info */
-               for(m=0;m<the_ins.nrel;m++) {
-                       switch(the_ins.reloc[m].wid) {
-                       case 'B':
-                               n=1;
-                               break;
-                       case 'b':
-                               n=1;
-                               break;
-                       case '3':
-                               n=2;
-                               break;
-                       case 'w':
-                               n=2;
-                               break;
-                       case 'l':
-                               n=4;
-                               break;
-                       default:
-                               as_fatal("Don't know how to figure width of %c in md_assemble()",the_ins.reloc[m].wid);
-                       }
-                       
-                       fix_new(frag_now,
-                               (toP-frag_now->fr_literal)-the_ins.numo*2+the_ins.reloc[m].n,
-                               n,
-                               the_ins.reloc[m].add,
-                               the_ins.reloc[m].sub,
-                               the_ins.reloc[m].off,
-                               the_ins.reloc[m].pcrel,
-                               NO_RELOC);
-               }
-               return;
-       }
-       
-       /* There's some frag hacking */
-       for(n=0,fromP= &the_ins.opcode[0];n<the_ins.nfrag;n++) {
-               int wid;
-               
-               if(n==0) wid=2*the_ins.fragb[n].fragoff;
-               else wid=2*(the_ins.numo-the_ins.fragb[n-1].fragoff);
-               toP=frag_more(wid);
-               to_beg_P=toP;
-               shorts_this_frag=0;
-               for(m=wid/2;m;--m) {
-                       md_number_to_chars(toP,(long)(*fromP),2);
-                       toP+=2;
-                       fromP++;
-                       shorts_this_frag++;
-               }
-               for(m=0;m<the_ins.nrel;m++) {
-                       if((the_ins.reloc[m].n)>= 2*shorts_this_frag /* 2*the_ins.fragb[n].fragoff */) {
-                               the_ins.reloc[m].n-= 2*shorts_this_frag /* 2*the_ins.fragb[n].fragoff */;
-                               break;
-                       }
-                       wid=the_ins.reloc[m].wid;
-                       if(wid==0)
-                           continue;
-                       the_ins.reloc[m].wid=0;
-                       wid = (wid=='b') ? 1 : (wid=='w') ? 2 : (wid=='l') ? 4 : 4000;
-                       
-                       fix_new(frag_now,
-                               (toP-frag_now->fr_literal)-the_ins.numo*2+the_ins.reloc[m].n,
-                               wid,
-                               the_ins.reloc[m].add,
-                               the_ins.reloc[m].sub,
-                               the_ins.reloc[m].off,
-                               the_ins.reloc[m].pcrel,
-                               NO_RELOC);
-               }
-               /* know(the_ins.fragb[n].fadd); */
-               (void)frag_var(rs_machine_dependent,10,0,(relax_substateT)(the_ins.fragb[n].fragty),
-                              the_ins.fragb[n].fadd,the_ins.fragb[n].foff,to_beg_P);
-       }
-       n=(the_ins.numo-the_ins.fragb[n-1].fragoff);
-       shorts_this_frag=0;
-       if(n) {
-               toP=frag_more(n*sizeof(short));
-               while(n--) {
-                       md_number_to_chars(toP,(long)(*fromP),2);
-                       toP+=2;
-                       fromP++;
-                       shorts_this_frag++;
-               }
-       }
-       for(m=0;m<the_ins.nrel;m++) {
-               int wid;
-               
-               wid=the_ins.reloc[m].wid;
-               if(wid==0)
-                   continue;
-               the_ins.reloc[m].wid=0;
-               wid = (wid=='b') ? 1 : (wid=='w') ? 2 : (wid=='l') ? 4 : 4000;
-               
-               fix_new(frag_now,
-                       (the_ins.reloc[m].n + toP-frag_now->fr_literal)- /* the_ins.numo */ shorts_this_frag*2,
-                       wid,
-                       the_ins.reloc[m].add,
-                       the_ins.reloc[m].sub,
-                       the_ins.reloc[m].off,
-                       the_ins.reloc[m].pcrel,
-                       NO_RELOC);
-       }
-}
-
-/* This function is called once, at assembler startup time.  This should
-   set up all the tables, etc that the MD part of the assembler needs
-   */
-void
-    md_begin()
-{
-       /*
-        * md_begin -- set up hash tables with 68000 instructions.
-        * similar to what the vax assembler does.  ---phr
-        */
-       /* RMS claims the thing to do is take the m68k-opcode.h table, and make
-          a copy of it at runtime, adding in the information we want but isn't
-          there.  I think it'd be better to have an awk script hack the table
-          at compile time.  Or even just xstr the table and use it as-is.  But
-          my lord ghod hath spoken, so we do it this way.  Excuse the ugly var
-          names.  */
-       
-       register const struct m68k_opcode *ins;
-       register struct m68k_incant *hack,
-       *slak;
-       register char *retval = 0;              /* empty string, or error msg text */
-       register unsigned int i;
-       register char c;
-       
-       if ((op_hash = hash_new()) == NULL)
-           as_fatal("Virtual memory exhausted");
-       
-       obstack_begin(&robyn,4000);
-       for (ins = m68k_opcodes; ins < endop; ins++) {
-               hack=slak=(struct m68k_incant *)obstack_alloc(&robyn,sizeof(struct m68k_incant));
-               do {
-                       /* we *could* ignore insns that don't match our
-                          arch here but just leaving them out of the
-                          hash. */
-                       slak->m_operands=ins->args;
-                       slak->m_opnum=strlen(slak->m_operands)/2;
-                       slak->m_arch = ins->arch;
-                       slak->m_opcode=ins->opcode;
-                       /* This is kludgey */
-                       slak->m_codenum=((ins->match)&0xffffL) ? 2 : 1;
-                       if((ins+1)!=endop && !strcmp(ins->name,(ins+1)->name)) {
-                               slak->m_next=(struct m68k_incant *) obstack_alloc(&robyn,sizeof(struct m68k_incant));
-                               ins++;
-                       } else
-                           slak->m_next=0;
-                       slak=slak->m_next;
-               } while(slak);
-               
-               retval = hash_insert (op_hash, ins->name,(char *)hack);
-               /* Didn't his mommy tell him about null pointers? */
-               if(retval && *retval)
-                   as_fatal("Internal Error:  Can't hash %s: %s",ins->name,retval);
-       }
-       
-       for (i = 0; i < sizeof(mklower_table) ; i++)
-           mklower_table[i] = (isupper(c = (char) i)) ? tolower(c) : c;
-       
-       for (i = 0 ; i < sizeof(notend_table) ; i++) {
-               notend_table[i] = 0;
-               alt_notend_table[i] = 0;
-       }
-       notend_table[','] = 1;
-       notend_table['{'] = 1;
-       notend_table['}'] = 1;
-       alt_notend_table['a'] = 1;
-       alt_notend_table['A'] = 1;
-       alt_notend_table['d'] = 1;
-       alt_notend_table['D'] = 1;
-       alt_notend_table['#'] = 1;
-       alt_notend_table['f'] = 1;
-       alt_notend_table['F'] = 1;
-       alt_notend_table['('] = 1;
-       
-#ifdef REGISTER_PREFIX
-       alt_notend_table[REGISTER_PREFIX] = 1;
-#endif
-       
-       
-}
-
-#if 0
-#define notend(s) ((*s == ',' || *s == '}' || *s == '{' \
-                   || (*s == ':' && strchr("aAdD#(", s[1]))) \
-                  ? 0 : 1)
-#endif
-
-/* This funciton is called once, before the assembler exits.  It is
-   supposed to do any final cleanup for this part of the assembler.
-   */
-void
-    md_end()
-{
-}
-
-/* Equal to MAX_PRECISION in atof-ieee.c */
-#define MAX_LITTLENUMS 6
-
-/* Turn a string in str into a floating point constant of type
-   type, and store the appropriate bytes in *litP.  The number of LITTLENUMS
-   emitted is stored in *sizeP .  An error message is returned, or NULL on OK.
-   */
-char *
-    md_atof(type,litP,sizeP)
-char type;
-char *litP;
-int *sizeP;
-{
-       int     prec;
-       LITTLENUM_TYPE words[MAX_LITTLENUMS];
-       LITTLENUM_TYPE *wordP;
-       char    *t;
-       char    *atof_ieee();
-       
-       switch(type) {
-       case 'f':
-       case 'F':
-       case 's':
-       case 'S':
-               prec = 2;
-               break;
-               
-       case 'd':
-       case 'D':
-       case 'r':
-       case 'R':
-               prec = 4;
-               break;
-               
-       case 'x':
-       case 'X':
-               prec = 6;
-               break;
-               
-       case 'p':
-       case 'P':
-               prec = 6;
-               break;
-               
-       default:
-               *sizeP=0;
-               return "Bad call to MD_ATOF()";
-       }
-       t=atof_ieee(input_line_pointer,type,words);
-       if(t)
-           input_line_pointer=t;
-       
-       *sizeP=prec * sizeof(LITTLENUM_TYPE);
-       for(wordP=words;prec--;) {
-               md_number_to_chars(litP,(long)(*wordP++),sizeof(LITTLENUM_TYPE));
-               litP+=sizeof(LITTLENUM_TYPE);
-       }
-       return "";      /* Someone should teach Dean about null pointers */
-}
-
-/* Turn an integer of n bytes (in val) into a stream of bytes appropriate
-   for use in the a.out file, and stores them in the array pointed to by buf.
-   This knows about the endian-ness of the target machine and does
-   THE RIGHT THING, whatever it is.  Possible values for n are 1 (byte)
-   2 (short) and 4 (long)  Floating numbers are put out as a series of
-   LITTLENUMS (shorts, here at least)
-   */
-void
-    md_number_to_chars(buf,val,n)
-char   *buf;
-long   val;
-int n;
-{
-       switch(n) {
-       case 1:
-               *buf++=val;
-               break;
-       case 2:
-               *buf++=(val>>8);
-               *buf++=val;
-               break;
-       case 4:
-               *buf++=(val>>24);
-               *buf++=(val>>16);
-               *buf++=(val>>8);
-               *buf++=val;
-               break;
-       default:
-               as_fatal("failed sanity check.");
-       }
-}
-
-void
-    md_apply_fix(fixP, val)
-fixS *fixP;
-long val;
-{
-       char *buf = fixP->fx_where + fixP->fx_frag->fr_literal;
-       
-       switch(fixP->fx_size) {
-       case 1:
-               *buf++=val;
-               break;
-       case 2:
-               *buf++=(val>>8);
-               *buf++=val;
-               break;
-       case 4:
-               *buf++=(val>>24);
-               *buf++=(val>>16);
-               *buf++=(val>>8);
-               *buf++=val;
-               break;
-       default:
-               BAD_CASE (fixP->fx_size);
-       }
-}
-
-
-/* *fragP has been relaxed to its final size, and now needs to have
-   the bytes inside it modified to conform to the new size  There is UGLY
-   MAGIC here. ..
-   */
-void
-    md_convert_frag(headers, fragP)
-object_headers *headers;
-register fragS *fragP;
-{
-       long disp;
-       long ext = 0;
-       
-       /* Address in object code of the displacement.  */
-       register int object_address = fragP -> fr_fix + fragP -> fr_address;
-       
-#ifdef IBM_COMPILER_SUX
-       /* This is wrong but it convinces the native rs6000 compiler to
-          generate the code we want. */
-       register char *buffer_address = fragP -> fr_literal;
-       buffer_address += fragP -> fr_fix;
-#else /* IBM_COMPILER_SUX */
-       /* Address in gas core of the place to store the displacement.  */
-       register char *buffer_address = fragP->fr_fix + fragP->fr_literal;
-#endif /* IBM_COMPILER_SUX */
-       
-       /* No longer true:   know(fragP->fr_symbol); */
-       
-       /* The displacement of the address, from current location.  */
-       disp = fragP->fr_symbol ? S_GET_VALUE(fragP->fr_symbol) : 0;
-       disp = (disp + fragP->fr_offset) - object_address;
-       
-       switch(fragP->fr_subtype) {
-       case TAB(BCC68000,BYTE):
-    case TAB(BRANCH,BYTE):
-       know(issbyte(disp));
-       if(disp==0)
-           as_bad("short branch with zero offset: use :w");
-       fragP->fr_opcode[1]=disp;
-       ext=0;
-       break;
- case TAB(DBCC,SHORT):
-     know(issword(disp));
-       ext=2;
-       break;
- case TAB(BCC68000,SHORT):
- case TAB(BRANCH,SHORT):
-     know(issword(disp));
-       fragP->fr_opcode[1]=0x00;
-       ext=2;
-       break;
- case TAB(BRANCH,LONG):
-     if (cpu_of_arch(current_architecture) < m68020) {
-            if (fragP->fr_opcode[0]==0x61) {
-                    fragP->fr_opcode[0]= 0x4E;
-                    fragP->fr_opcode[1]= 0xB9; /* JBSR with ABSL LONG offset */
-                    subseg_change(SEG_TEXT, 0);
-                    
-                    fix_new(fragP,
-                            fragP->fr_fix,
-                            4,
-                            fragP->fr_symbol,
-                            0,
-                            fragP->fr_offset,
-                            0,
-                            NO_RELOC);
-                    
-                    fragP->fr_fix+=4;
-                    ext=0;
-            } else if (fragP->fr_opcode[0]==0x60) {
-                    fragP->fr_opcode[0]= 0x4E;
-                    fragP->fr_opcode[1]= 0xF9;      /* JMP  with ABSL LONG offset */
-                    subseg_change(SEG_TEXT, 0);
-                    fix_new(fragP, fragP->fr_fix, 4, fragP->fr_symbol, 0, fragP->fr_offset,0,
-                            NO_RELOC);
-                    fragP->fr_fix+=4;
-                    ext=0;
-            } else {
-                    as_bad("Long branch offset not supported.");
-            }
-     } else {
-            fragP->fr_opcode[1]=0xff;
-            ext=4;
-     }
-       break;
- case TAB(BCC68000,LONG):
-     /* only Bcc 68000 instructions can come here */
-     /* change bcc into b!cc/jmp absl long */
-     fragP->fr_opcode[0] ^= 0x01; /* invert bcc */
-        fragP->fr_opcode[1] = 0x6;   /* branch offset = 6 */
-       
-       /* JF: these used to be fr_opcode[2,3], but they may be in a
-          different frag, in which case refering to them is a no-no.
-          Only fr_opcode[0,1] are guaranteed to work. */
-        *buffer_address++ = 0x4e;  /* put in jmp long (0x4ef9) */ 
-        *buffer_address++ = 0xf9;  
-        fragP->fr_fix += 2;         /* account for jmp instruction */
-        subseg_change(SEG_TEXT,0);
-        fix_new(fragP, fragP->fr_fix, 4, fragP->fr_symbol, 0, 
-               fragP->fr_offset,0,
-               NO_RELOC);
-        fragP->fr_fix += 4;
-        ext=0;
-       break;
- case TAB(DBCC,LONG):
-     /* only DBcc 68000 instructions can come here */
-     /* change dbcc into dbcc/jmp absl long */
-     /* JF: these used to be fr_opcode[2-7], but that's wrong */
-     *buffer_address++ = 0x00;  /* branch offset = 4 */
-        *buffer_address++ = 0x04;  
-        *buffer_address++ = 0x60;  /* put in bra pc+6 */ 
-        *buffer_address++ = 0x06;  
-        *buffer_address++ = 0x4e;  /* put in jmp long (0x4ef9) */ 
-        *buffer_address++ = 0xf9;  
-       
-        fragP->fr_fix += 6;         /* account for bra/jmp instructions */
-        subseg_change(SEG_TEXT,0);
-        fix_new(fragP, fragP->fr_fix, 4, fragP->fr_symbol, 0, 
-               fragP->fr_offset,0,
-               NO_RELOC);
-        fragP->fr_fix += 4;
-        ext=0;
-       break;
- case TAB(FBRANCH,SHORT):
-     know((fragP->fr_opcode[1]&0x40)==0);
-       ext=2;
-       break;
- case TAB(FBRANCH,LONG):
-     fragP->fr_opcode[1]|=0x40;        /* Turn on LONG bit */
-       ext=4;
-       break;
- case TAB(PCREL,SHORT):
-     ext=2;
-       break;
- case TAB(PCREL,LONG):
-     /* The thing to do here is force it to ABSOLUTE LONG, since
-       PCREL is really trying to shorten an ABSOLUTE address anyway */
-     /* JF FOO This code has not been tested */
-     subseg_change(SEG_TEXT,0);
-       fix_new(fragP, fragP->fr_fix, 4, fragP->fr_symbol, 0, fragP->fr_offset, 0, NO_RELOC);
-       if((fragP->fr_opcode[1] & 0x3F) != 0x3A)
-           as_bad("Internal error (long PC-relative operand) for insn 0x%04lx at 0x%lx",
-                  fragP->fr_opcode[0],fragP->fr_address);
-       fragP->fr_opcode[1]&= ~0x3F;
-       fragP->fr_opcode[1]|=0x39;      /* Mode 7.1 */
-       fragP->fr_fix+=4;
-       /* md_number_to_chars(buffer_address,
-          (long)(fragP->fr_symbol->sy_value + fragP->fr_offset),
-          4); */
-       ext=0;
-       break;
- case TAB(PCLEA,SHORT):
-     subseg_change(SEG_TEXT,0);
-       fix_new(fragP,(int)(fragP->fr_fix),2,fragP->fr_symbol,(symbolS *)0,fragP->fr_offset,1,
-               NO_RELOC);
-       fragP->fr_opcode[1] &= ~0x3F;
-       fragP->fr_opcode[1] |= 0x3A;
-       ext=2;
-       break;
- case TAB(PCLEA,LONG):
-     subseg_change(SEG_TEXT,0);
-       fix_new(fragP,(int)(fragP->fr_fix)+2,4,fragP->fr_symbol,(symbolS *)0,fragP->fr_offset+2,1,
-               NO_RELOC);
-       *buffer_address++ = 0x01;
-       *buffer_address++ = 0x70;
-       fragP->fr_fix+=2;
-       /* buffer_address+=2; */
-       ext=4;
-       break;
-       
-} /* switch on subtype */
-       
-       if (ext) {
-               md_number_to_chars(buffer_address, (long) disp, (int) ext);
-               fragP->fr_fix += ext;
-               /*        H_SET_TEXT_SIZE(headers, H_GET_TEXT_SIZE(headers) + ext); */
-       } /* if extending */
-       
-       return;
-} /* md_convert_frag() */
-
-/* Force truly undefined symbols to their maximum size, and generally set up
-   the frag list to be relaxed
-   */
-int md_estimate_size_before_relax(fragP, segment)
-register fragS *fragP;
-segT segment;
-{
-       int     old_fix;
-       register char *buffer_address = fragP->fr_fix + fragP->fr_literal;
-       
-       old_fix = fragP->fr_fix;
-       
-       /* handle SZ_UNDEF first, it can be changed to BYTE or SHORT */
-       switch(fragP->fr_subtype) {
-               
-       case TAB(BRANCH,SZ_UNDEF): {
-               if((fragP->fr_symbol != NULL)   /* Not absolute */
-                  && S_GET_SEGMENT(fragP->fr_symbol) == segment) {
-                       fragP->fr_subtype=TAB(TABTYPE(fragP->fr_subtype),BYTE);
-                       break;
-               } else if((fragP->fr_symbol == 0) || (cpu_of_arch(current_architecture) < m68020)) {
-                       /* On 68000, or for absolute value, switch to abs long */
-                       /* FIXME, we should check abs val, pick short or long */
-                       if(fragP->fr_opcode[0]==0x61) {
-                               fragP->fr_opcode[0]= 0x4E;
-                               fragP->fr_opcode[1]= 0xB9;      /* JBSR with ABSL LONG offset */
-                               subseg_change(SEG_TEXT, 0);
-                               fix_new(fragP, fragP->fr_fix, 4, 
-                                       fragP->fr_symbol, 0, fragP->fr_offset, 0, NO_RELOC);
-                               fragP->fr_fix+=4;
-                               frag_wane(fragP);
-                       } else if(fragP->fr_opcode[0]==0x60) {
-                               fragP->fr_opcode[0]= 0x4E;
-                               fragP->fr_opcode[1]= 0xF9;  /* JMP  with ABSL LONG offset */
-                               subseg_change(SEG_TEXT, 0);
-                               fix_new(fragP, fragP->fr_fix, 4, 
-                                       fragP->fr_symbol, 0, fragP->fr_offset, 0, NO_RELOC);
-                               fragP->fr_fix+=4;
-                               frag_wane(fragP);
-                       } else {
-                               as_warn("Long branch offset to extern symbol not supported.");
-                       }
-               } else {        /* Symbol is still undefined.  Make it simple */
-                       fix_new(fragP, (int)(fragP->fr_fix), 4, fragP->fr_symbol,
-                               (symbolS *)0, fragP->fr_offset+4, 1, NO_RELOC);
-                       fragP->fr_fix+=4;
-                       fragP->fr_opcode[1]=0xff;
-                       frag_wane(fragP);
-                       break;
-               }
-               
-               break;
-       } /* case TAB(BRANCH,SZ_UNDEF) */
-               
-       case TAB(FBRANCH,SZ_UNDEF): {
-               if(S_GET_SEGMENT(fragP->fr_symbol) == segment || flagseen['l']) {
-                       fragP->fr_subtype = TAB(FBRANCH,SHORT);
-                       fragP->fr_var += 2;
-               } else {
-                       fragP->fr_subtype = TAB(FBRANCH,LONG);
-                       fragP->fr_var += 4;
-               }
-               break;
-       } /* TAB(FBRANCH,SZ_UNDEF) */
-               
-       case TAB(PCREL,SZ_UNDEF): {
-               if(S_GET_SEGMENT(fragP->fr_symbol) == segment || flagseen['l']) {
-                       fragP->fr_subtype = TAB(PCREL,SHORT);
-                       fragP->fr_var += 2;
-               } else {
-                       fragP->fr_subtype = TAB(PCREL,LONG);
-                       fragP->fr_var += 4;
-               }
-               break;
-       } /* TAB(PCREL,SZ_UNDEF) */
-               
-       case TAB(BCC68000,SZ_UNDEF): {
-               if((fragP->fr_symbol != NULL)
-                  && S_GET_SEGMENT(fragP->fr_symbol) == segment) {
-                       fragP->fr_subtype=TAB(BCC68000,BYTE);
-                       break;
-               }
-               /* only Bcc 68000 instructions can come here */
-               /* change bcc into b!cc/jmp absl long */
-               fragP->fr_opcode[0] ^= 0x01; /* invert bcc */
-               if(flagseen['l']) {
-                       fragP->fr_opcode[1] = 0x04;   /* branch offset = 6 */
-                       /* JF: these were fr_opcode[2,3] */
-                       buffer_address[0] = 0x4e;  /* put in jmp long (0x4ef9) */ 
-                       buffer_address[1] = 0xf8;
-                       fragP->fr_fix += 2;          /* account for jmp instruction */
-                       subseg_change(SEG_TEXT,0);
-                       fix_new(fragP, fragP->fr_fix, 2, fragP->fr_symbol, 0, 
-                               fragP->fr_offset, 0, NO_RELOC);
-                       fragP->fr_fix += 2;
-               } else {
-                       fragP->fr_opcode[1] = 0x06;   /* branch offset = 6 */
-                       /* JF: these were fr_opcode[2,3] */
-                       buffer_address[2] = 0x4e;  /* put in jmp long (0x4ef9) */ 
-                       buffer_address[3] = 0xf9;
-                       fragP->fr_fix += 2;          /* account for jmp instruction */
-                       subseg_change(SEG_TEXT,0);
-                       fix_new(fragP, fragP->fr_fix, 4, fragP->fr_symbol, 0, 
-                               fragP->fr_offset, 0, NO_RELOC);
-                       fragP->fr_fix += 4;
-               }
-               frag_wane(fragP);
-               break;
-       } /* case TAB(BCC68000,SZ_UNDEF) */
-               
-       case TAB(DBCC,SZ_UNDEF): {
-               if (fragP->fr_symbol != NULL && S_GET_SEGMENT(fragP->fr_symbol) == segment) {
-                       fragP->fr_subtype=TAB(DBCC,SHORT);
-                       fragP->fr_var+=2;
-                       break;
-               }
-               /* only DBcc 68000 instructions can come here */
-               /* change dbcc into dbcc/jmp absl long */
-               /* JF: these used to be fr_opcode[2-4], which is wrong. */
-               buffer_address[0] = 0x00;  /* branch offset = 4 */
-               buffer_address[1] = 0x04;  
-               buffer_address[2] = 0x60;  /* put in bra pc + ... */
-               
-               if(flagseen['l']) {
-                       /* JF: these were fr_opcode[5-7] */
-                       buffer_address[3] = 0x04; /* plus 4 */
-                       buffer_address[4] = 0x4e;/* Put in Jump Word */
-                       buffer_address[5] = 0xf8;
-                       fragP->fr_fix += 6;       /* account for bra/jmp instruction */
-                       subseg_change(SEG_TEXT,0);
-                       fix_new(fragP, fragP->fr_fix, 2, fragP->fr_symbol, 0, 
-                               fragP->fr_offset, 0, NO_RELOC);
-                       fragP->fr_fix += 2;
-               } else {
-                       /* JF: these were fr_opcode[5-7] */
-                       buffer_address[3] = 0x06;  /* Plus 6 */
-                       buffer_address[4] = 0x4e;  /* put in jmp long (0x4ef9) */ 
-                       buffer_address[5] = 0xf9;  
-                       fragP->fr_fix += 6;       /* account for bra/jmp instruction */
-                       subseg_change(SEG_TEXT,0);
-                       fix_new(fragP, fragP->fr_fix, 4, fragP->fr_symbol, 0, 
-                               fragP->fr_offset, 0, NO_RELOC);
-                       fragP->fr_fix += 4;
-               }
-               
-               frag_wane(fragP);
-               break;
-       } /* case TAB(DBCC,SZ_UNDEF) */
-               
-       case TAB(PCLEA,SZ_UNDEF): {
-               if ((S_GET_SEGMENT(fragP->fr_symbol))==segment || flagseen['l']) {
-                       fragP->fr_subtype=TAB(PCLEA,SHORT);
-                       fragP->fr_var+=2;
-               } else {
-                       fragP->fr_subtype=TAB(PCLEA,LONG);
-                       fragP->fr_var+=6;
-               }
-               break;
-       } /* TAB(PCLEA,SZ_UNDEF) */
-               
-       default:
-               break;
-               
-       } /* switch on subtype looking for SZ_UNDEF's. */
-       
-       /* now that SZ_UNDEF are taken care of, check others */
-       switch(fragP->fr_subtype) {
-       case TAB(BCC68000,BYTE):
-    case TAB(BRANCH,BYTE):
-       /* We can't do a short jump to the next instruction,
-          so we force word mode.  */
-       if (fragP->fr_symbol && S_GET_VALUE(fragP->fr_symbol)==0 &&
-           fragP->fr_symbol->sy_frag==fragP->fr_next) {
-               fragP->fr_subtype=TAB(TABTYPE(fragP->fr_subtype),SHORT);
-               fragP->fr_var+=2;
-       }
-       break;
- default:
-       break;
-}
-       return fragP->fr_var + fragP->fr_fix - old_fix;
-}
-
-#if defined(OBJ_AOUT) | defined(OBJ_BOUT)
-/* the bit-field entries in the relocation_info struct plays hell 
-   with the byte-order problems of cross-assembly.  So as a hack,
-   I added this mach. dependent ri twiddler.  Ugly, but it gets
-   you there. -KWK */
-/* on m68k: first 4 bytes are normal unsigned long, next three bytes
-   are symbolnum, most sig. byte first.  Last byte is broken up with
-   bit 7 as pcrel, bits 6 & 5 as length, bit 4 as pcrel, and the lower
-   nibble as nuthin. (on Sun 3 at least) */
-/* Translate the internal relocation information into target-specific
-   format. */
-#ifdef comment
-void
-    md_ri_to_chars(the_bytes, ri)
-char *the_bytes;
-struct reloc_info_generic *ri;
-{
-       /* this is easy */
-       md_number_to_chars(the_bytes, ri->r_address, 4);
-       /* now the fun stuff */
-       the_bytes[4] = (ri->r_symbolnum >> 16) & 0x0ff;
-       the_bytes[5] = (ri->r_symbolnum >> 8) & 0x0ff;
-       the_bytes[6] = ri->r_symbolnum & 0x0ff;
-       the_bytes[7] = (((ri->r_pcrel << 7)  & 0x80) | ((ri->r_length << 5) & 0x60) | 
-                       ((ri->r_extern << 4)  & 0x10)); 
-}
-#endif /* comment */
-
-void tc_aout_fix_to_chars(where, fixP, segment_address_in_file)
-char *where;
-fixS *fixP;
-relax_addressT segment_address_in_file;
-{
-       /*
-        * In: length of relocation (or of address) in chars: 1, 2 or 4.
-        * Out: GNU LD relocation length code: 0, 1, or 2.
-        */
-       
-       static unsigned char nbytes_r_length [] = { 42, 0, 1, 42, 2 };
-       
-       long r_extern;
-       long r_symbolnum;
-       
-       /* this is easy */
-       md_number_to_chars(where,
-                          fixP->fx_frag->fr_address + fixP->fx_where - segment_address_in_file,
-                          4);
-       
-       /* now the fun stuff */
-       if (S_GET_TYPE(fixP->fx_addsy) == N_UNDF) {
-               r_extern        = 1;
-               r_symbolnum     = fixP->fx_addsy->sy_number;
-       } else {
-               r_extern        = 0;
-               r_symbolnum     = S_GET_TYPE(fixP->fx_addsy);
-       }
-       
-       where[4] = (r_symbolnum >> 16) & 0x0ff;
-       where[5] = (r_symbolnum >> 8) & 0x0ff;
-       where[6] = r_symbolnum & 0x0ff;
-       where[7] = (((fixP->fx_pcrel << 7)  & 0x80) | ((nbytes_r_length[fixP->fx_size] << 5) & 0x60) | 
-                   ((r_extern << 4)  & 0x10)); 
-       
-       return;
-} /* tc_aout_fix_to_chars() */
-
-#endif /* OBJ_AOUT or OBJ_BOUT */
-
-#ifndef WORKING_DOT_WORD
-const int md_short_jump_size = 4;
-const int md_long_jump_size = 6;
-
-void
-    md_create_short_jump(ptr,from_addr,to_addr,frag,to_symbol)
-char   *ptr;
-long   from_addr,
-    to_addr;
-fragS  *frag;
-symbolS        *to_symbol;
-{
-       long offset;
-       
-       offset = to_addr - (from_addr+2);
-       
-       md_number_to_chars(ptr  ,(long)0x6000,2);
-       md_number_to_chars(ptr+2,(long)offset,2);
-}
-
-void
-    md_create_long_jump(ptr,from_addr,to_addr,frag,to_symbol)
-char   *ptr;
-long   from_addr,
-    to_addr;
-fragS  *frag;
-symbolS        *to_symbol;
-{
-       long offset;
-       
-       if (cpu_of_arch(current_architecture) < m68020) {
-               offset=to_addr-S_GET_VALUE(to_symbol);
-               md_number_to_chars(ptr  ,(long)0x4EF9,2);
-               md_number_to_chars(ptr+2,(long)offset,4);
-               fix_new(frag,(ptr+2)-frag->fr_literal,4,to_symbol,(symbolS *)0,(long)0,0,
-                       NO_RELOC);
-       } else {
-               offset=to_addr - (from_addr+2);
-               md_number_to_chars(ptr  ,(long)0x60ff,2);
-               md_number_to_chars(ptr+2,(long)offset,4);
-       }
-}
-
-#endif
-/* Different values of OK tell what its OK to return.  Things that aren't OK are an error (what a shock, no?)
-   
-   0:  Everything is OK
-   10:  Absolute 1:8   only
-   20:  Absolute 0:7   only
-   30:  absolute 0:15  only
-   40:  Absolute 0:31  only
-   50:  absolute 0:127 only
-   55:  absolute -64:63    only
-   60:  absolute -128:127      only
-   70:  absolute 0:4095        only
-   80:  No bignums
-   
-   */
-
-static int get_num(exp,ok)
-struct m68k_exp *exp;
-int ok;
-{
-#ifdef TEST2
-       long    l = 0;
-       
-       if(!exp->e_beg)
-           return 0;
-       if(*exp->e_beg=='0') {
-               if(exp->e_beg[1]=='x')
-                   sscanf(exp->e_beg+2,"%x",&l);
-               else
-                   sscanf(exp->e_beg+1,"%O",&l);
-               return l;
-       }
-       return atol(exp->e_beg);
-#else
-       char    *save_in;
-       char    c_save;
-       
-       if(!exp) {
-               /* Can't do anything */
-               return 0;
-       }
-       if(!exp->e_beg || !exp->e_end) {
-               seg(exp)=SEG_ABSOLUTE;
-               adds(exp)=0;
-               subs(exp)=0;
-               offs(exp)= (ok==10) ? 1 : 0;
-               as_warn("Null expression defaults to %ld",offs(exp));
-               return 0;
-       }
-       
-       exp->e_siz=0;
-       if(/* ok!=80 && */exp->e_end[-1]==SIZER && (exp->e_end-exp->e_beg)>=2) {
-               switch(exp->e_end[0]) {
-               case 's':
-               case 'S':
-               case 'b':
-               case 'B':
-                       exp->e_siz=1;
-                       break;
-               case 'w':
-               case 'W':
-                       exp->e_siz=2;
-                       break;
-               case 'l':
-               case 'L':
-                       exp->e_siz=3;
-                       break;
-               default:
-                       as_bad("Unknown size for expression \"%c\"",exp->e_end[0]);
-               }
-               exp->e_end-=2;
-       }
-       c_save=exp->e_end[1];
-       exp->e_end[1]='\0';
-       save_in=input_line_pointer;
-       input_line_pointer=exp->e_beg;
-       switch(expression(&(exp->e_exp))) {
-       case SEG_PASS1:
-               seg(exp)=SEG_ABSOLUTE;
-               adds(exp)=0;
-               subs(exp)=0;
-               offs(exp)= (ok==10) ? 1 : 0;
-               as_warn("Unknown expression: '%s' defaulting to %d",exp->e_beg,offs(exp));
-               break;
-               
-       case SEG_ABSENT:
-               /* Do the same thing the VAX asm does */
-               seg(exp)=SEG_ABSOLUTE;
-               adds(exp)=0;
-               subs(exp)=0;
-               offs(exp)=0;
-               if(ok==10) {
-                       as_warn("expression out of range: defaulting to 1");
-                       offs(exp)=1;
-               }
-               break;
-       case SEG_ABSOLUTE:
-               switch(ok) {
-               case 10:
-                       if(offs(exp)<1 || offs(exp)>8) {
-                               as_warn("expression out of range: defaulting to 1");
-                               offs(exp)=1;
-                       }
-                       break;
-               case 20:
-                       if(offs(exp)<0 || offs(exp)>7)
-                           goto outrange;
-                       break;
-               case 30:
-                       if(offs(exp)<0 || offs(exp)>15)
-                           goto outrange;
-                       break;
-               case 40:
-                       if(offs(exp)<0 || offs(exp)>32)
-                           goto outrange;
-                       break;
-               case 50:
-                       if(offs(exp)<0 || offs(exp)>127)
-                           goto outrange;
-                       break;
-               case 55:
-                       if(offs(exp)<-64 || offs(exp)>63)
-                           goto outrange;
-                       break;
-               case 60:
-                       if(offs(exp)<-128 || offs(exp)>127)
-                           goto outrange;
-                       break;
-               case 70:
-                       if(offs(exp)<0 || offs(exp)>4095) {
-                       outrange:
-                               as_warn("expression out of range: defaulting to 0");
-                               offs(exp)=0;
-                       }
-                       break;
-               default:
-                       break;
-               }
-               break;
-       case SEG_TEXT:
-       case SEG_DATA:
-       case SEG_BSS:
-       case SEG_UNKNOWN:
-       case SEG_DIFFERENCE:
-               if(ok>=10 && ok<=70) {
-                       seg(exp)=SEG_ABSOLUTE;
-                       adds(exp)=0;
-                       subs(exp)=0;
-                       offs(exp)= (ok==10) ? 1 : 0;
-                       as_warn("Can't deal with expression \"%s\": defaulting to %ld",exp->e_beg,offs(exp));
-               }
-               break;
-       case SEG_BIG:
-               if(ok==80 && offs(exp)<0) {     /* HACK! Turn it into a long */
-                       LITTLENUM_TYPE words[6];
-                       
-                       gen_to_words(words,2,8L);/* These numbers are magic! */
-                       seg(exp)=SEG_ABSOLUTE;
-                       adds(exp)=0;
-                       subs(exp)=0;
-                       offs(exp)=words[1]|(words[0]<<16);
-               } else if(ok!=0) {
-                       seg(exp)=SEG_ABSOLUTE;
-                       adds(exp)=0;
-                       subs(exp)=0;
-                       offs(exp)= (ok==10) ? 1 : 0;
-                       as_warn("Can't deal with expression \"%s\": defaulting to %ld",exp->e_beg,offs(exp));
-               }
-               break;
-       default:
-               as_fatal("failed sanity check.");
-       }
-       if(input_line_pointer!=exp->e_end+1)
-           as_bad("Ignoring junk after expression");
-       exp->e_end[1]=c_save;
-       input_line_pointer=save_in;
-       if(exp->e_siz) {
-               switch(exp->e_siz) {
-               case 1:
-                       if(!isbyte(offs(exp)))
-                           as_warn("expression doesn't fit in BYTE");
-                       break;
-               case 2:
-                       if(!isword(offs(exp)))
-                           as_warn("expression doesn't fit in WORD");
-                       break;
-               }
-       }
-       return offs(exp);
-#endif
-} /* get_num() */
-
-/* These are the back-ends for the various machine dependent pseudo-ops.  */
-void demand_empty_rest_of_line();      /* Hate those extra verbose names */
-
-static void s_data1() {
-       subseg_new(SEG_DATA,1);
-       demand_empty_rest_of_line();
-} /* s_data1() */
-
-static void s_data2() {
-       subseg_new(SEG_DATA,2);
-       demand_empty_rest_of_line();
-} /* s_data2() */
-
-static void s_bss() {
-       /* We don't support putting frags in the BSS segment, but we
-          can put them into initialized data for now... */
-       subseg_new(SEG_DATA,255);       /* FIXME-SOON */
-       demand_empty_rest_of_line();
-} /* s_bss() */
-
-static void s_even() {
-       register int temp;
-       register long temp_fill;
-       
-       temp = 1;               /* JF should be 2? */
-       temp_fill = get_absolute_expression ();
-       if ( ! need_pass_2 ) /* Never make frag if expect extra pass. */
-           frag_align (temp, (int)temp_fill);
-       demand_empty_rest_of_line();
-} /* s_even() */
-
-static void s_proc() {
-       demand_empty_rest_of_line();
-} /* s_proc() */
-
-/* s_space is defined in read.c .skip is simply an alias to it. */
-
-/*
- * md_parse_option
- *     Invocation line includes a switch not recognized by the base assembler.
- *     See if it's a processor-specific option.  These are:
- *
- *     -[A]m[c]68000, -[A]m[c]68008, -[A]m[c]68010, -[A]m[c]68020, -[A]m[c]68030, -[A]m[c]68040
- *     -[A]m[c]68881, -[A]m[c]68882, -[A]m[c]68851
- *             Select the architecture.  Instructions or features not
- *             supported by the selected architecture cause fatal
- *             errors.  More than one may be specified.  The default is
- *             -m68020 -m68851 -m68881.  Note that -m68008 is a synonym
- *             for -m68000, and -m68882 is a synonym for -m68881.
- *
- * MAYBE_FLOAT_TOO is defined below so that specifying a processor type
- * (e.g. m68020) also requests that float instructions be included.  This
- * is the default setup, mostly to avoid hassling users.  A better
- * rearrangement of this structure would be to add an option to DENY
- * floating point opcodes, for people who want to really know there's none
- * of that funny floaty stuff going on.  FIXME-later.
- */
-#ifndef MAYBE_FLOAT_TOO
-#define        MAYBE_FLOAT_TOO m68881
-#endif
-
-int md_parse_option(argP,cntP,vecP)
-char **argP;
-int *cntP;
-char ***vecP;
-{
-       switch(**argP) {
-       case 'l':       /* -l means keep external to 2 bit offset
-                          rather than 16 bit one */
-               break;
-               
-       case 'S': /* -S means that jbsr's always turn into jsr's.  */
-               break;
-               
-       case 'A':
-               (*argP)++;
-               /* intentional fall-through */
-       case 'm':
-               (*argP)++;
-               
-               if (**argP=='c') {
-                       (*argP)++;
-               } /* allow an optional "c" */
-               
-               if (!strcmp(*argP, "68000")
-                   || !strcmp(*argP, "68008")) {
-                       current_architecture |= m68000;
-               } else if (!strcmp(*argP, "68010")) {
-#ifdef TE_SUN
-                       omagic= 1<<16|OMAGIC;
-#endif
-                       current_architecture |= m68010;
-                       
-               } else if (!strcmp(*argP, "68020")) { 
-                       current_architecture |= m68020 | MAYBE_FLOAT_TOO;
-                       
-               } else if (!strcmp(*argP, "68030")) { 
-                       current_architecture |= m68030 | MAYBE_FLOAT_TOO;
-                       
-               } else if (!strcmp(*argP, "68040")) { 
-                       current_architecture |= m68040 | MAYBE_FLOAT_TOO;
-                       
-#ifndef NO_68881
-               } else if (!strcmp(*argP, "68881")) {
-                       current_architecture |= m68881;
-                       
-               } else if (!strcmp(*argP, "68882")) {
-                       current_architecture |= m68882;
-                       
-#endif /* NO_68881 */
-#ifndef NO_68851
-               } else if (!strcmp(*argP,"68851")) { 
-                       current_architecture |= m68851;
-                       
-#endif /* NO_68851 */
-               } else {
-                       as_warn("Unknown architecture, \"%s\". option ignored", *argP);
-               } /* switch on architecture */
-               
-               while(**argP) (*argP)++;
-               
-               break;
-               
-       case 'p':
-               if (!strcmp(*argP,"pic")) {
-                       (*argP) += 3;
-                       break;          /* -pic, Position Independent Code */
-               } else {
-                       return(0);
-               } /* pic or not */
-               
-       default:
-               return 0;
-       }
-       return 1;
-}
-
-
-#ifdef TEST2
-
-/* TEST2:  Test md_assemble() */
-/* Warning, this routine probably doesn't work anymore */
-
-main()
-{
-       struct m68k_it the_ins;
-       char buf[120];
-       char *cp;
-       int     n;
-       
-       m68k_ip_begin();
-       for(;;) {
-               if(!gets(buf) || !*buf)
-                   break;
-               if(buf[0]=='|' || buf[1]=='.')
-                   continue;
-               for(cp=buf;*cp;cp++)
-                   if(*cp=='\t')
-                       *cp=' ';
-               if(is_label(buf))
-                   continue;
-               memset(&the_ins, '\0', sizeof(the_ins));
-               m68k_ip(&the_ins,buf);
-               if(the_ins.error) {
-                       printf("Error %s in %s\n",the_ins.error,buf);
-               } else {
-                       printf("Opcode(%d.%s): ",the_ins.numo,the_ins.args);
-                       for(n=0;n<the_ins.numo;n++)
-                           printf(" 0x%x",the_ins.opcode[n]&0xffff);
-                       printf("    ");
-                       print_the_insn(&the_ins.opcode[0],stdout);
-                       (void)putchar('\n');
-               }
-               for(n=0;n<strlen(the_ins.args)/2;n++) {
-                       if(the_ins.operands[n].error) {
-                               printf("op%d Error %s in %s\n",n,the_ins.operands[n].error,buf);
-                               continue;
-                       }
-                       printf("mode %d, reg %d, ",the_ins.operands[n].mode,the_ins.operands[n].reg);
-                       if(the_ins.operands[n].b_const)
-                           printf("Constant: '%.*s', ",1+the_ins.operands[n].e_const-the_ins.operands[n].b_const,the_ins.operands[n].b_const);
-                       printf("ireg %d, isiz %d, imul %d, ",the_ins.operands[n].ireg,the_ins.operands[n].isiz,the_ins.operands[n].imul);
-                       if(the_ins.operands[n].b_iadd)
-                           printf("Iadd: '%.*s',",1+the_ins.operands[n].e_iadd-the_ins.operands[n].b_iadd,the_ins.operands[n].b_iadd);
-                       (void)putchar('\n');
-               }
-       }
-       m68k_ip_end();
-       return 0;
-}
-
-is_label(str)
-char *str;
-{
-       while(ISSPACE(*str))
-           str++;
-       while(*str && !ISSPACE(*str))
-           str++;
-       if(str[-1]==':' || str[1]=='=')
-           return 1;
-       return 0;
-}
-
-#endif
-
-/* Possible states for relaxation:
-   
-   0 0 branch offset   byte    (bra, etc)
-   0 1                 word
-   0 2                 long
-   
-   1 0 indexed offsets byte    a0@(32,d4:w:1) etc
-   1 1                 word
-   1 2                 long
-   
-   2 0 two-offset index word-word a0@(32,d4)@(45) etc
-   2 1                 word-long
-   2 2                 long-word
-   2 3                 long-long
-   
-   */
-
-
-
-#ifdef DONTDEF
-abort()
-{
-       printf("ABORT!\n");
-       exit(12);
-}
-
-print_frags()
-{
-       fragS *fragP;
-       extern fragS *text_frag_root;
-       
-       for(fragP=text_frag_root;fragP;fragP=fragP->fr_next) {
-               printf("addr %lu  next 0x%x  fix %ld  var %ld  symbol 0x%x  offset %ld\n",
-                      fragP->fr_address,fragP->fr_next,fragP->fr_fix,fragP->fr_var,fragP->fr_symbol,fragP->fr_offset);
-               printf("opcode 0x%x  type %d  subtype %d\n\n",fragP->fr_opcode,fragP->fr_type,fragP->fr_subtype);
-       }
-       fflush(stdout);
-       return 0;
-}
-#endif
-
-#ifdef DONTDEF
-/*VARARGS1*/
-panic(format,args)
-char *format;
-{
-       fputs("Internal error:",stderr);
-       _doprnt(format,&args,stderr);
-       (void)putc('\n',stderr);
-       as_where();
-       abort();
-}
-#endif
-
-/* We have no need to default values of symbols.  */
-
-/* ARGSUSED */
-symbolS *
-    md_undefined_symbol (name)
-char *name;
-{
-       return 0;
-}
-
-/* Parse an operand that is machine-specific.  
-   We just return without modifying the expression if we have nothing
-   to do.  */
-
-/* ARGSUSED */
-void
-    md_operand (expressionP)
-expressionS *expressionP;
-{
-}
-
-/* Round up a section size to the appropriate boundary.  */
-long
-    md_section_align (segment, size)
-segT segment;
-long size;
-{
-       return size;            /* Byte alignment is fine */
-}
-
-/* Exactly what point is a PC-relative offset relative TO?
-   On the 68k, they're relative to the address of the offset, plus
-   its size. (??? Is this right?  FIXME-SOON!) */
-long
-    md_pcrel_from (fixP)
-fixS *fixP;
-{
-       return fixP->fx_size + fixP->fx_where + fixP->fx_frag->fr_address;
-}
-
-#ifdef MRI
-void s_ds(size)
-{
-       unsigned int fill = get_absolute_expression() * size;
-       char *p = frag_var (rs_fill, fill, fill, (relax_substateT)0, (symbolS *)0,
-                           1, (char *)0);
-       * p = 0;
-       demand_empty_rest_of_line();
-}
-
-void s_dc(size)
-{
-       
-       cons(size);
-       
-       
-}
-
-void s_dcb(size)
-{
-       int repeat = get_absolute_expression();
-       int fill;
-       
-       if (*input_line_pointer == ',') 
-           {
-                   char *p;
-                   input_line_pointer++;
-                   
-                   fill = get_absolute_expression();
-                   p = frag_var(rs_fill,
-                                size,
-                                size,
-                                (relax_substateT)0,
-                                (symbolS *)0,
-                                repeat,
-                                0);
-                   md_number_to_chars(p, fill, size);
-           }
-       demand_empty_rest_of_line();  
-       
-       
-}
-
-void s_chip()
-{
-       unsigned int target = get_absolute_expression();
-#define MACHINE_MASK (m68000 | m68008 | m68010 | m68020 | m68040)
-       switch (target) 
-           {
-           case 68000:
-           case 68008:
-                   current_architecture = (current_architecture & ~ MACHINE_MASK) | m68000;
-                   break;
-           case 68010:
-                   current_architecture = (current_architecture & ~ MACHINE_MASK) | m68010;
-                   break;
-           case 68020:
-                   current_architecture = (current_architecture & ~ MACHINE_MASK) | m68020;
-                   break;
-           case 68030:
-                   current_architecture = (current_architecture & ~ MACHINE_MASK) | m68030;
-                   break;
-           case 68040:
-                   current_architecture = (current_architecture & ~ MACHINE_MASK) | m68040;
-                   break;
-           case 68881:
-                   current_architecture |= m68881;
-                   break;
-           case 68882:
-                   current_architecture |= m68882;
-                   break;
-           case 68851:
-                   current_architecture |= m68851;
-                   break;
-                   
-           default:
-                   as_bad("Unrecognised CHIP %d\n", target);
-                   
-           }
-       demand_empty_rest_of_line();
-}
-
-#endif
-
-/*
- * Local Variables:
- * comment-column: 0
- * fill-column: 131
- * End:
- */
-
-/* end of tc-m68kmote.c */
diff --git a/gas/config/tc-m68kmote.h b/gas/config/tc-m68kmote.h
deleted file mode 100644 (file)
index 95e0c15..0000000
+++ /dev/null
@@ -1,64 +0,0 @@
-/* This file is tc-m68kmote.h
-
-   Copyright (C) 1987-1992 Free Software Foundation, Inc.
-   
-   This file is part of GAS, the GNU Assembler.
-   
-   GAS is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
-   any later version.
-   
-   GAS is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-   
-   You should have received a copy of the GNU General Public License
-   along with GAS; see the file COPYING.  If not, write to
-   the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-/*
- * This file is tp-generic.h and is intended to be a template for
- * target processor specific header files. 
- */
-
-#define TC_M68K 1
-
-#ifdef TE_SUN3
-/* This variable contains the value to write out at the beginning of
-   the a.out file.  The 2<<16 means that this is a 68020 file instead
-   of an old-style 68000 file */
-
-#define DEFAULT_MAGIC_NUMBER_FOR_OBJECT_FILE (2<<16|OMAGIC);   /* Magic byte for file header */
-#endif /* TE_SUN3 */
-    
-#define AOUT_MACHTYPE 0x2
-#define REVERSE_SORT_RELOCS /* FIXME-NOW: this line can be removed. */
-#define LOCAL_LABELS_FB
-    
-#define tc_crawl_symbol_chain(a)       {;} /* not used */
-#define tc_headers_hook(a)             {;} /* not used */
-#define tc_aout_pre_write_hook(x)      {;} /* not used */
-
-#define LISTING_WORD_SIZE 2   /* A word is 2 bytes */
-#define LISTING_LHS_WIDTH 3   /* 3 word on the first line */
-#define LISTING_LHS_WIDTH_SECOND 3  /* One word on the second line */
-#define LISTING_LHS_CONT_LINES 4   /* And 4 lines max */
-#define LISTING_HEADER "68K GAS "
-
-/* Copied from write.c */
-#define M68K_AIM_KLUDGE(aim, this_state,this_type) \
-    if (aim==0 && this_state== 4) { /* hard encoded from tc-m68k.c */ \
-                                       aim=this_type->rlx_forward+1; /* Force relaxation into word mode */ \
-                                   }
-#define MRI 
-
-/*
- * Local Variables:
- * comment-column: 0
- * fill-column: 131
- * End:
- */
-
-/* end of tc-m68kmote.h */
diff --git a/gas/config/te-motor.h b/gas/config/te-motor.h
deleted file mode 100755 (executable)
index 2254841..0000000
+++ /dev/null
@@ -1,4 +0,0 @@
-/* Machine specific defines for the unisoft 680x0 V.3.2 version 1.3 */
-
-/* Remove leading underscore from the gcc generated symbol names */
-#define STRIP_UNDERSCORE 1
diff --git a/gas/config/te-sparc.h b/gas/config/te-sparc.h
deleted file mode 100755 (executable)
index c1a3743..0000000
+++ /dev/null
@@ -1,52 +0,0 @@
-/* sparc.h -- Header file for the SPARC
-   Copyright (C) 1989 Free Software Foundation, Inc.
-
-This file is part of GAS, the GNU Assembler.
-
-GAS is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2, or (at your option)
-any later version.
-
-GAS is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with GAS; see the file COPYING.  If not, write to
-the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-/*
- * The following enum and struct were borrowed from
- * sunOS  /usr/include/sun4/a.out.h
- *
- */
-
-enum reloc_type
-{
-    RELOC_8,        RELOC_16,        RELOC_32,       RELOC_DISP8,
-    RELOC_DISP16,   RELOC_DISP32,    RELOC_WDISP30,  RELOC_WDISP22,
-    RELOC_HI22,     RELOC_22,        RELOC_13,       RELOC_LO10,
-    RELOC_SFA_BASE, RELOC_SFA_OFF13, RELOC_BASE10,   RELOC_BASE13,
-    RELOC_BASE22,   RELOC_PC10,      RELOC_PC22,     RELOC_JMP_TBL,
-    RELOC_SEGOFF16, RELOC_GLOB_DAT,  RELOC_JMP_SLOT, RELOC_RELATIVE,
-
-    NO_RELOC
-};
-
-struct reloc_info_sparc
-{
-    unsigned long r_address;
-/*
- * Using bit fields here is a bad idea because the order is not portable. :-(
- */
-    unsigned int r_index    : 24;
-    unsigned int r_extern   : 1;
-    unsigned int unused     : 2;
-    enum reloc_type r_type  : 5;
-    long r_addend;
-};
-
-#define relocation_info reloc_info_sparc
-
diff --git a/gas/config/te-unisoft.h b/gas/config/te-unisoft.h
deleted file mode 100755 (executable)
index 2254841..0000000
+++ /dev/null
@@ -1,4 +0,0 @@
-/* Machine specific defines for the unisoft 680x0 V.3.2 version 1.3 */
-
-/* Remove leading underscore from the gcc generated symbol names */
-#define STRIP_UNDERSCORE 1
diff --git a/gas/config/tmake-sun3 b/gas/config/tmake-sun3
deleted file mode 100755 (executable)
index 9681e6d..0000000
+++ /dev/null
@@ -1 +0,0 @@
-# This line from make-sun3.
diff --git a/gas/configdos.bat b/gas/configdos.bat
deleted file mode 100755 (executable)
index 18331cd..0000000
+++ /dev/null
@@ -1,14 +0,0 @@
-@echo off
-echo Configuring GAS for H8/300
-
-copy config\ho-go32.h host.h
-copy config\tc-h8300.c targ-cpu.c
-copy config\tc-h8300.h targ-cpu.h
-copy config\te-generic.h targ-env.h
-copy config\objcoff-bfd.h obj-format.h
-copy config\objcoff-bfd.c obj-format.c
-copy config\atof-ieee.c atof-targ.c
-
-copy Makefile.dos Makefile
-
-
diff --git a/gas/configure b/gas/configure
deleted file mode 100755 (executable)
index 3cdccfe..0000000
+++ /dev/null
@@ -1,687 +0,0 @@
-#!/bin/sh
-
-# Configuration script
-#   Copyright (C) 1988, 1990, 1991 Free Software Foundation, Inc.
-
-#This file is part of GNU.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-# 
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-# 
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-# $Id$
-
-#
-# Shell script to create proper links to machine-dependent files in
-# preparation for compilation.
-#
-# If configure succeeds, it leaves its status in config.status.
-# If configure fails after disturbing the status quo, 
-#      config.status is removed.
-#
-
-remove=rm
-hard_link=ln
-symbolic_link='ln -s'
-
-#for Test
-#remove="echo rm"
-#hard_link="echo ln"
-#symbolic_link="echo ln -s"
-
-progname=$0
-
-# clear some things potentially inherited from environment.
-ansi=
-arguments=$*
-defaulttargets=
-destdir=
-fatal=
-hostsubdir=
-Makefile=Makefile
-Makefile_in=Makefile.in
-norecursion=
-recurring=
-removing=
-srcdir=
-srctrigger=
-target=
-targets=
-commontargets=
-configdirs=
-targetsubdir=
-template=
-verbose=
-
-for arg in $*;
-do
-       case ${arg} in
-       -ansi | +a*)
-               ansi=true
-               clib=clib
-               ;;
-       -destdir=* | +destdir=* | +destdi=* | +destd=* | +dest=* | +des=* | +de=* | +d=*)
-               destdir=`echo ${arg} | sed 's/[+-]d[a-z]*=//'`
-               ;;
-       -languages=* | +languages=* | +language=* | +languag=* \
-               | +langua=* | +langu=* | +lang=* | +lan=* | +la=* \
-               | +l=*)
-               languages="${languages} `echo ${arg} | sed 's/[+-]l[a-z]*=//'`"
-               ;;
-       -gas | +g*)
-               gas=yes
-               ;;
-       -help | +h*)
-               fatal=true
-               ;;
-       -nfp | +nf*)
-               nfp=yes
-               ;;
-       -norecursion | +no*)
-               norecursion=true
-               ;;
-       -recurring | +recurring | +recurrin | +recurri | +recurr | +recur | +recu | +rec | +re)
-               recurring=true
-               ;;
-       -rm | +rm)
-               removing=${arg}
-               ;;
-#      -srcdir=* | +srcdir=* | +srcdi=* | +srcd=* | +src=* | +sr=* | +s=*)
-#              srcdir=`echo ${arg} | sed 's/[+-]s[a-z]*=//'`
-#              ;;
-       -subdirs | +f* | +su*)
-               subdirs=${arg}
-               ;;
-       -target=* | +target=* | +targe=* | +targ=* | +tar=* | +ta=*)
-               if [ -n "${targets}" ] ; then
-                       subdirs="+subdirs"
-               fi
-
-               newtargets="${targets} `echo ${arg} | sed 's/[+-]t[a-z]*=//'`"
-               targets="${newtargets}"
-               ;;
-       -template=* | +template=* | +templat=* | +templa=* | +templ=* | +temp=* | +tem=* | +te=*)
-               template=`echo ${arg} | sed 's/[+-]template=//'`
-               ;;
-       -v | -verbose | +v*)
-               verbose=${arg}
-               ;;
-       -* | +*)
-               (echo ;
-               echo "Unrecognized option: \"${arg}\"". ;
-               echo) 1>&2
-               fatal=true
-               ;;
-       *)
-               if [ -n "${hosts}" ] ; then
-                       subdirs="+subdirs"
-               fi
-
-               newhosts="${hosts} ${arg}"
-               hosts=${newhosts}
-               ;;
-       esac
-done
-
-if [ -n "${verbose}" ] ; then
-       echo `pwd`/configure $*
-fi
-
-# process host and target only if not rebuilding configure itself or removing.
-if [ -z "${template}" -a -z "${removing}" -a -z "${fatal}" ] ; then
-       # Complain if an arg is missing
-       if [ -z "${hosts}" ] ; then
-               (echo ;
-               echo "configure: No HOST specified." ;
-               echo) 1>&2
-               fatal=true
-       fi
-fi
-
-if [ -n "${fatal}" -o "${hosts}" = "help" ] ; then
-       (echo "Usage: configure HOST" ;
-       echo ;
-       echo "Options: [defaults in brackets]" ;
-       echo " +ansi            configure w/ANSI library. [no ansi lib]" ;
-       echo " +destdir=MYDIR   configure for installation into MYDIR. [/usr/local]" ;
-       echo " +subdirs         configure in subdirectories.  [in source directories]" ;
-       echo " +lang=LANG       configure to build LANG. [gcc]" ;
-       echo " +help            print this message. [normal config]" ;
-       echo " +gas             configure the compilers for use with gas. [native as]" ;
-       echo " +nfp             configure the compilers default to soft floating point. [hard float]" ;
-       echo " +norecursion     configure this directory only. [recurse]" ;
-       echo " +rm              remove this configuration. [build a configuration]" ;
-       echo " +target=TARGET   configure for TARGET.  [TARGET = HOST]" ;
-       echo " +template=TEM    rebuild configure using TEM. [normal config]" ;
-       echo ;
-       echo "Where HOST and TARGET are something like \"vax\", \"sun3\", \"encore\", etc." ;
-       echo "Asking for more than one \"+target\" implies \"+subdirs\".  Any other" ;
-       echo "options given will apply to all targets.") 1>&2
-
-       if [ -r config.status ] ; then
-               cat config.status
-       fi
-
-       exit 1
-fi
-
-#### configure.in common parts come in here.
-# This file is a shell script that supplies the information necessary
-# to tailor a template configure script into the configure script
-# appropriate for this directory.  For more information, check any
-# existing configure script.
-
-srctrigger=as.c
-srcname="gas"
-targetdependent=true
-
-## end of common part.
-
-# are we rebuilding config itself?
-if [ -n "${template}" ] ; then
-       if [ ! -r ${template} ] ; then
-               echo '***' "Can't find template ${template}." 1>&2
-               exit 1
-       fi
-
-# prep the template
-       sed -e '/^#### configure.in common parts come in here.$/,/^## end of common part.$/c\
-#### configure.in common parts come in here.\
-## end of common part.' \
-       -e '/^#### configure.in per-host parts come in here.$/,/^## end of per-host part.$/c\
-#### configure.in per-host parts come in here.\
-## end of per-host part.' \
-       -e '/^#### configure.in per-target parts come in here.$/,/^## end of per-target part.$/c\
-#### configure.in per-target parts come in here.\
-## end of per-target part.' \
-       -e '/^#### configure.in post-target parts come in here.$/,/^## end of post-target part.$/c\
-#### configure.in post-target parts come in here.\
-## end of post-target part.' \
-       < ${template} > template.new
-
-       if [ -r configure.in ] ; then
-               if [ -z "`grep '^# per\-host:' configure.in`" ] ; then
-                       echo '***' `pwd`/configure.in has no "per-host:" line. 1>&2
-                       exit 1
-               fi
-
-               if [ -z "`grep '^# per\-target:' configure.in`" ] ; then
-                       echo '***' `pwd`/configure.in has no "per-target:" line. 1>&2
-                       exit 1
-               fi
-
-               # split configure.in into common, per-host, per-target,
-               # and post-target parts.  Post-target is optional.
-               sed -e '/^# per\-host:/,$d' configure.in > configure.com
-               sed -e '1,/^# per\-host:/d' -e '/^# per\-target:/,$d' configure.in > configure.hst
-               if grep -s '^# post-target:' configure.in ; then
-                 sed -e '1,/^# per\-target:/d' -e '/^# post\-target:/,$d' configure.in > configure.tgt
-                 sed -e '1,/^# post\-target:/d' configure.in > configure.pos
-               else
-                 sed -e '1,/^# per\-target:/d' configure.in > configure.tgt
-                 echo >configure.pos
-               fi
-
-               # and insert them
-               sed -e '/^#### configure.in common parts come in here.$/  r configure.com' \
-                       -e '/^#### configure.in per\-host parts come in here.$/  r configure.hst' \
-                       -e '/^#### configure.in per\-target parts come in here.$/  r configure.tgt' \
-                       -e '/^#### configure.in post\-target parts come in here.$/  r configure.pos' \
-                       template.new > configure.new
-
-               rm -f configure.com configure.tgt configure.hst configure.pos
-       else
-               echo Warning: no configure.in in `pwd`
-               cat ${template} >> configure
-       fi
-
-       chmod a+x configure.new
-       rm template.new
-#      mv configure configure.old
-       mv configure.new configure
-
-       if [ -n "${verbose}" ] ; then
-               echo Rebuilt configure in `pwd`
-       fi
-
-       # Now update config.sub from the template directory.
-       if echo "$template" | grep -s 'configure$' ; then
-               cp `echo "$template" | sed s/configure$/config.sub/` ./config.sub.new
-       #       mv config.sub config.sub.old
-               mv config.sub.new config.sub
-
-               if [ -n "${verbose}" ] ; then
-                       echo Rebuilt config.sub in `pwd`
-               fi
-       fi
-
-       if [ -z "${norecursion}" ] ; then
-               # If template is relative path, make it absolute for recurring.
-               if echo "${template}" | grep -s '^/' ; then
-                  true
-               else
-                  template=`pwd`/${template}
-               fi
-
-               while [ -n "${configdirs}" ] ; do
-                       # set configdir to car of configdirs, configdirs to cdr of configdirs
-                       set ${configdirs}; configdir=$1; shift; configdirs=$*
-
-                       if [ "`echo ${configdir}.*`" != "${configdir}.*" ] ; then
-                               targetspecificdirs=${configdir}.*
-                       else
-                               targetspecificdirs=
-                       fi
-
-                       for i in ${configdir} ${targetspecificdirs} ; do
-                               if [ -d $i ] ; then
-                                       if [ -r $i/configure ] ; then
-                                               (cd $i ;
-                                                       ./configure +template=${template} ${verbose})
-                                       else
-                                               echo Warning: No configure script in `pwd`/$i
-                                       fi
-                               else
-                                       if [ -n "${verbose}" ] ; then
-                                         echo Warning: directory $i is missing.
-                                       fi
-                               fi
-                       done
-               done
-       fi
-
-       exit 0
-fi
-
-# some sanity checks on configure.in
-if [ -z "${srctrigger}" ] ; then
-       echo Warning: srctrigger not set in configure.in. `pwd` not configured.
-       exit 1
-fi
-
-for host in ${hosts} ; do
-       # Default other arg
-       if [ -z "${targets}" -o -n "${defaulttargets}" ] ; then
-               targets=${host}
-               defaulttargets=true
-       fi
-
-       host_alias=${host}
-
-       result=`/bin/sh ./config.sub ${host}`
-       host_cpu=`echo $result | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'`
-       host_vendor=`echo $result | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'`
-       host_os=`echo $result | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'`
-       host=${host_cpu}-${host_vendor}-${host_os}
-       host_makefile_frag=config/hmake-${host}
-
-#### configure.in per-host parts come in here.
-
-gas_host=generic
-
-case "${host_cpu}" in
-a29k | rs6000 | vax)  gas_host=${host_cpu} ;;  
-mips)
-       case "${host_os}" in
-       ultrix) gas_host=decstation ;;
-       esac
-       ;;
-*)
-       case "${host_os}" in
-       ansi | ultrix | hpux | sysv*)   gas_host=${host_os} ;;
-       *)
-               case "${host_vendor}" in
-               sun)
-                       case "${host_cpu}" in
-                       m68k)   gas_host=sun3 ;;
-                       i386)   gas_host=sun386 ;;
-                       sparc)  gas_host=sun4 ;;
-                       esac
-                       ;;
-               esac
-               ;;
-       esac
-       ;;
-esac
-
-## end of per-host part.
-
-       for target in ${targets} ; do
-
-               target_alias=${target}
-               result=`/bin/sh ./config.sub ${target}`
-               target_cpu=`echo $result | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'`
-               target_vendor=`echo $result | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'`
-               target_os=`echo $result | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'`
-               target=${target_cpu}-${target_vendor}-${target_os}
-               target_makefile_frag=config/tmake-${target}
-
-#### configure.in per-target parts come in here.
-
-# assign cpu type
-emulation=generic
-
-cpu_type=${target_cpu}
-
-# assign object format
-case ${target_os} in
-sysv* | -coff*)
-       obj_format=coff
-       ;;
-bout*)
-       obj_format=bout
-       ;;
-bsd* | sunos* | *)
-       obj_format=aout
-       ;;
-generic)
-       obj_format=generic
-       ;;
-esac
-
-# assign floating point type
-case ${target_cpu} in
-vax)
-       atof=vax
-       ;;
-*)
-       atof=ieee
-       ;;
-esac
-
-# and target makefile frag
-
-target_makefile_frag=config/tmake-${target_cpu}
-
-files="config/ho-${gas_host}.h config/tc-${cpu_type}.c \
-       config/tc-${cpu_type}.h config/te-${emulation}.h \
-       config/obj-${obj_format}.h config/obj-${obj_format}.c \
-       config/atof-${atof}.c"
-
-links="host.h targ-cpu.c targ-cpu.h targ-env.h obj-format.h obj-format.c atof-targ.c"
-## end of per-target part.
-
-               # Temporarily, we support only direct subdir builds.
-               hostsubdir=H-${host_alias}
-               targetsubdir=T-${target_alias}
-
-               if [ -n "${removing}" ] ; then
-                       if [ -n "${subdirs}" ] ; then
-                               if [ -d "${hostsubdir}" ] ; then
-                                       rm -rf ${hostsubdir}/${targetsubdir}
-
-                                       if [ -z "`(ls ${hostsubdir}) 2>&1 | grep Target- | grep -v Target-independent`" ] ; then
-                                               rm -rf ${hostsubdir}
-                                       fi
-                               else
-                                       echo Warning: no `pwd`/${hostsubdir} to remove.
-                               fi
-                       else
-                               rm -f ${Makefile} config.status ${links}
-                       fi
-               else
-                       if [ -n "${subdirs}" ] ; then
-                               # check for existing status before allowing forced subdirs.
-                               if [ -f ${Makefile} ] ; then
-                                       echo '***' "${Makefile} already exists in source directory.  `pwd` not configured." 1>&2
-                                       exit 1
-                               fi
-
-                               if [ ! -d ${hostsubdir} ] ; then mkdir ${hostsubdir} ; fi
-                               cd ${hostsubdir}
-
-                               if [ ! -d ${targetsubdir} ] ; then
-                                       if [ -z "${commontargets}" ] ; then
-                                               mkdir ${targetsubdir}
-                                       else
-                                               if [ ! -d Target-independent ] ; then
-                                                       mkdir Target-independent
-                                               fi
-
-                                               ${symbolic_link} Target-independent ${targetsubdir}
-                                       fi # if target independent
-                               fi # if no target dir yet
-
-                               cd ${targetsubdir}
-
-                               srcdir=../..
-                       else
-                               # if not subdir builds, then make sure none exist.
-                               if [ -n "`(ls .) 2>&1 | grep Host-`" ] ; then
-                                       echo '***' "Configured subdirs exist.  `pwd` not configured." 1>&2
-                                       exit 1
-                               fi
-                       fi
-
-                       # Find the source files, if location was not specified.
-                       if [ -z "${srcdir}" ] ; then
-                               srcdirdefaulted=1
-                               srcdir=.
-                               if [ -n "${srctrigger}" -a ! -r ${srctrigger} ] ; then
-                                       srcdir=..
-                               fi
-                       fi
-
-                       if [ -n "${srctrigger}" -a ! -r ${srcdir}/${srctrigger} ] ; then
-                               if [ -z "${srcdirdefaulted}" ] ; then
-                                       echo '***' "${progname}: Can't find ${srcname} sources in `pwd`/${srcdir}" 1>&2
-                               else
-                                       echo '***' "${progname}: Can't find ${srcname} sources in `pwd`/. or `pwd`/.." 1>&2
-                               fi
-
-                               echo '***' \(At least ${srctrigger} is missing.\) 1>&2
-                               exit 1
-                       fi
-
-                       # Set up the list of links to be made.
-                       # ${links} is the list of link names, and ${files} is the list of names to link to.
-
-                       # Make the links.
-                       while [ -n "${files}" ] ; do
-                               # set file to car of files, files to cdr of files
-                               set ${files}; file=$1; shift; files=$*
-                               set ${links}; link=$1; shift; links=$*
-
-                               if [ ! -r ${srcdir}/${file} ] ; then
-                                       echo '***' "${progname}: cannot create a link \"${link}\"," 1>&2
-                                       echo '***' "since the file \"${file}\" does not exist." 1>&2
-                                       exit 1
-                               fi
-
-                               ${remove} -f ${link}
-                               rm -f config.status
-                               # Make a symlink if possible, otherwise try a hard link
-                               ${symbolic_link} ${srcdir}/${file} ${link} 2>/dev/null || ${hard_link} ${srcdir}/${file} ${link}
-
-                               if [ ! -r ${link} ] ; then
-                                       echo '***' "${progname}: unable to link \"${link}\" to \"${srcdir}/${file}\"." 1>&2
-                                       exit 1
-                               fi
-
-                               if [ -n "${verbose}" ] ; then
-                                       echo "Linked \"${link}\" to \"${srcdir}/${file}\"."
-                               fi
-                       done
-
-                       # Create a .gdbinit file which runs the one in srcdir
-                       # and tells GDB to look there for source files.
-
-                       case ${srcdir} in
-                       .)
-                               ;;
-                       *)
-                               echo "dir ." > .gdbinit
-                               echo "dir ${srcdir}" >> .gdbinit
-                               echo "source ${srcdir}/.gdbinit" >> .gdbinit
-                               ;;
-                       esac
-
-                       # Install a makefile, and make it set VPATH
-                       # if necessary so that the sources are found.
-                       # Also change its value of srcdir.
-
-               # FIXME-someday: This business of always writing to .tem and mv back
-               # is so that I don't screw things up while developing.  Once this
-               # template is stable, these should be optimized. xoxorich.
-
-                       # Define macro CROSS_COMPILE in compilation if this is a cross-compiler.
-                       if [ "${host}" != "${target}" ] ; then
-                               echo "CROSS=-DCROSS_COMPILE" > ${Makefile}
-                               echo "ALL=start.encap" >> ${Makefile}
-                       else
-                               echo "ALL=all.internal" > ${Makefile}
-                       fi
-
-                       # set target, host, VPATH
-                       echo "host_alias = ${host_alias}" >> ${Makefile}
-                       echo "host_cpu = ${host_cpu}" >> ${Makefile}
-                       echo "host_vendor = ${host_vendor}" >> ${Makefile}
-                       echo "host_os = ${host_os}" >> ${Makefile}
-
-                       echo "target_alias = ${target_alias}" >> ${Makefile}
-                       echo "target_cpu = ${target_cpu}" >> ${Makefile}
-                       echo "target_vendor = ${target_vendor}" >> ${Makefile}
-                       echo "target_os = ${target_os}" >> ${Makefile}
-
-                       if [ -n "${subdirs}" ] ; then
-                               echo "subdir = /${hostsubdir}/${targetsubdir}" >> ${Makefile}
-                       else
-                               echo "subdir =" >> ${Makefile}
-                       fi
-
-               #       echo "workdir = `pwd`" >> ${Makefile}
-                       echo "VPATH = ${srcdir}" >> ${Makefile}
-
-                       # add "Makefile.in" (or whatever it's called)
-                       cat ${srcdir}/${Makefile_in} >> ${Makefile}
-
-                       # Conditionalize the makefile for this host.
-                       if [ -f ${srcdir}/${host_makefile_frag} ] ; then
-                               (echo "host_makefile_frag = ${srcdir}/${host_makefile_frag}" ; 
-                                       sed -e "/^####/  r ${srcdir}/${host_makefile_frag}" ${Makefile}) > Makefile.tem
-                               mv Makefile.tem ${Makefile}
-                       fi
-
-                       # Conditionalize the makefile for this target.
-                       if [ -f ${srcdir}/${target_makefile_frag} ] ; then
-                               (echo "target_makefile_frag = ${srcdir}/${target_makefile_frag}" ; 
-                                       sed -e "/^####/  r ${srcdir}/${target_makefile_frag}" ${Makefile}) > Makefile.tem
-                               mv Makefile.tem ${Makefile}
-                       fi
-
-                       # set srcdir
-                       sed "s@^srcdir = \.@srcdir = ${srcdir}@" ${Makefile} > Makefile.tem
-                       mv Makefile.tem ${Makefile}
-
-                       # set destdir
-                       if [ -n "${destdir}" ] ; then
-                               sed "s:^destdir =.*$:destdir = ${destdir}:" ${Makefile} > Makefile.tem
-                               mv Makefile.tem ${Makefile}
-                       fi
-
-                       # reset SUBDIRS
-                       sed "s:^SUBDIRS =.*$:SUBDIRS = ${configdirs}:" ${Makefile} > Makefile.tem
-                       mv Makefile.tem ${Makefile}
-
-                       # reset NONSUBDIRS
-                       sed "s:^NONSUBDIRS =.*$:NONSUBDIRS = ${noconfigdirs}:" ${Makefile} > Makefile.tem
-                       mv Makefile.tem ${Makefile}
-
-                       using=
-                       if [ -f ${srcdir}/${host_makefile_frag} ] ; then
-                               using=" using \"${host_makefile_frag}\""
-                       fi
-
-                       # remove any form feeds.
-                       sed -e "s/\f//" ${Makefile} > Makefile.tem
-                       mv Makefile.tem ${Makefile}
-
-                       if [ -f ${srcdir}/${target_makefile_frag} ] ; then
-                               if [ -z "${using}" ] ; then
-                                       andusing=" using \"${target_makefile_frag}\""
-                               else
-                                       andusing="${using} and \"${target_makefile_frag}\""
-                               fi
-                       else
-                               andusing=${using}
-                       fi
-
-                       if [ -n "${verbose}" -o -z "${recurring}" ] ; then
-                               echo "Created \"${Makefile}\"" in `pwd`${andusing}.
-                       fi
-
-#### configure.in post-target parts come in here.
-
-## end of post-target part.
-
-                       # describe the chosen configuration in config.status.
-                       # Make that file a shellscript which will reestablish
-                       # the same configuration.  Used in Makefiles to rebuild
-                       # Makefiles.
-
-                       echo "#!/bin/sh
-# ${srcname} was configured as follows:
-${srcdir}/configure" ${arguments} `if [ -z "${norecursion}" ] ; then echo +norecursion ; else true ; fi` > config.status
-                       chmod a+x config.status
-
-                       originaldir=`pwd`
-                       cd ${srcdir}
-               fi
-
-               # If there are subdirectories, then recurse. 
-               if [ -z "${norecursion}" -a -n "${configdirs}" ] ; then 
-                       for configdir in ${configdirs} ; do
-                               if [ -n "${verbose}" ] ; then
-                                       echo Configuring ${configdir}...
-                               fi
-
-                               if [ -d ${configdir} ] ; then
-                                       (cd ${configdir} ;
-                                               ./configure +recurring ${host_alias} +target=${target_alias} \
-                                                       ${verbose} ${subdirs} ${removing} +destdir=${destdir}) \
-                                               | sed 's/^/     /'
-                               else
-                                       if [ -n "${verbose}" ] ; then
-                                               echo Warning: directory \"${configdir}\" is missing.
-                                       fi
-                               fi
-                       done
-               fi
-       done # for each target
-
-       # Now build a Makefile for this host.
-       if [ -n "${subdirs}" -a ! -n "${removing}" ] ; then
-               cd ${hostsubdir}
-               cat > GNUmakefile << E!O!F
-# Makefile generated by configure for host ${host_alias}.
-
-ALL := $(shell ls -d Target-*)
-
-%:
-       $(foreach subdir,$(ALL),$(MAKE) -C $(subdir) \$@ &&) true
-
-all:
-E!O!F
-               cd ..
-       fi
-done # for each host
-
-exit 0
-
-#
-# Local Variables:
-# fill-column: 131
-# End:
-#
-
-# end of configure
diff --git a/gas/configure.was b/gas/configure.was
deleted file mode 100755 (executable)
index 2485927..0000000
+++ /dev/null
@@ -1,340 +0,0 @@
-#!/bin/sh
-# Configuration script for GNU GAS
-#   Copyright (C) 1988, 1990, 1991 Free Software Foundation, Inc.
-
-#This file is not yet part of GNU GAS.
-
-#GNU GAS is free software; you can redistribute it and/or modify
-#it under the terms of the GNU General Public License as published by
-#the Free Software Foundation; either version 1, or (at your option)
-#any later version.
-
-#GNU GAS is distributed in the hope that it will be useful,
-#but WITHOUT ANY WARRANTY; without even the implied warranty of
-#MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-#GNU General Public License for more details.
-
-#You should have received a copy of the GNU General Public License
-#along with GNU GAS; see the file COPYING.  If not, write to
-#the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
-
-# $Id$
-
-#
-# Shell script to create proper links to machine-dependent files in
-# preparation for compiling gas.
-#
-# Usage: configure [-srcdir=DIR] [-host=HOST] TARGET
-#
-# If configure succeeds, it leaves its status in config.status.
-# If configure fails after disturbing the status quo, 
-#      config.status is removed.
-#
-
-progname=$0
-
-remove=rm
-hard_link=ln
-symbolic_link='ln -s'
-
-host=
-target=
-
-#for Test
-#remove="echo rm"
-#hard_link="echo ln"
-#symbolic_link="echo ln -s"
-
-for arg in $*;
-do
-  case $arg in
-   -srcdir=* | +srcdir=* | +srcdi=* | +srcd=* | +src=* | +sr=* | +s=*)
-       srcdir=`echo $arg | sed 's/[+-]s[a-z]*=//'`
-       ;;
-   -host=* | +host=* | +hos=* | +ho=* | +h=*)
-       host=`echo $arg | sed 's/[+-]h[a-z]*=//'`
-       ;; 
-   *)
-# Allow configure HOST TARGET
-       if [ x$host = x ]
-       then
-               host=$target
-       fi
-       target=$arg
-       ;;
-  esac
-done
-
-# Complain if an arg is missing
-if [ x$target = x ]
-then
-       echo "Usage: $progname [+srcdir=DIR] [+host=HOST] TARGET"
-       echo -n "Where HOST and TARGET are something like "
-       echo "\`vax', \`sun3', \`encore', etc."
-       if [ -r config.status ]
-       then
-               cat config.status
-       fi
-       exit 1
-fi
-
-# Default other arg
-if [ x$host = x ]
-then
-       host=$target
-fi
-
-# Find the source files, if location was not specified.
-if [ x$srcdir = x ]
-then
-       srcdirdefaulted=1
-       srcdir=.
-       if [ ! -r as.c ]
-       then
-               srcdir=..
-       fi
-fi
-
-if [ ! -r ${srcdir}/as.c ]
-then
-       if [ x$srcdirdefaulted = x ]
-       then
-         echo "$progname: Can't find assembler sources in \`${srcdir}'." 1>&2
-       else
-         echo "$progname: Can't find assembler sources in \`.' or \`..'." 1>&2
-       fi
-       exit 1
-fi
-
-# Decode the host machine, then the target machine.
-# For the host machine, we save the ho variable as host_ho;
-# then we decode the target machine and forget everything else
-# that came from the host machine.
-for machine in $host $target; do
-       tc=
-       obj=
-
-       host_header=
-       obj_header=
-       obj_source=
-       te_header=
-       tc_header=
-       tc_source=
-
-       make_var_file=
-
-       case $machine in
-       generic)
-               ;;
-       i860)
-               tc=i860
-               obj=aout
-               ;;
-       pmax | dec3100)
-               ho=pmax
-               ;;
-       sun386)
-               ho=sun386
-               ;;
-       sun4 | sun4-aout | sun-4 | sun4-os4 | sun-4-os4)
-               ho=sun4
-               tc=sparc
-               obj=aout
-               ;;
-       sun4-bout)
-               tc=sparc
-               obj=bout
-               ;;
-       sun4-bfd-sunos)
-               tc=sparc
-               obj=bfd-sunos
-               ;;
-       i960 | i960-coff)
-               tc=i960
-               obj=coff
-               te=ic960
-               ;;
-       i960-bout)
-               tc=i960
-               obj=bout
-               ;;
-       i960-aout)
-               tc=i960
-               obj=aout
-               ;;
-       sun3 | sun3-aout)
-               ho=sun3
-               tc=m68k
-               obj=aout
-               te=sun3
-               ;;
-       a29k | a29k-aout)
-               tc=a29k
-               obj=aout
-               ;;
-       a29k-coff)
-               tc=a29k
-               obj=coff
-               ;;
-       i386)
-               tc=i386
-               obj=aout
-               ;;
-       ns32k)
-               tc=ns32k
-               obj=aout
-               ;;
-       vax)
-               tc=vax
-               obj=aout
-               ;;
-       rs6000)
-               ;;
-       esac
-       if [ x$pass1done = x ]
-       then
-               if [ x$ho = x ]; then ho=$host; fi
-               if [ x$ho_header = x ]; then ho_ho_header=ho-$ho.h
-               else ho_ho_header=$ho_header
-               fi
-               if [ x$make_var_file = x ]
-               then make_var_file=make-$ho; fi
-               ho_make_var_file=$make_var_file
-               pass1done=yes
-       else
-               host_make_var_file=$ho_make_var_file
-               ho_header=$ho_ho_header
-       fi
-done
-
-
-# Default the machine-specific variables that were not explicitly set.
-if [ x$te = x ]
-then te=generic; fi
-
-if [ x$te_header = x ]
-then te_header=te-$te.h; fi
-
-
-if [ x$tc = x ]
-then tc=generic; fi
-
-if [ x$tc_header = x ]
-then tc_header=tc-$tc.h; fi
-
-if [ x$tc_source = x ]
-then tc_source=tc-$tc.c; fi
-
-
-if [ x$obj = x ]
-then obj=generic; fi
-
-if [ x$obj_header = x ]
-then obj_header=obj-$obj.h; fi
-
-if [ x$obj_source = x ]
-then obj_source=obj-$obj.c; fi
-
-
-if [ x$atof_source = x ]
-then atof_source=atof-ieee.c; fi
-
-# Set up the list of links to be made.
-# $links is the list of link names, and $files is the list of names to link to.
-files="$ho_header $te_header $tc_header $tc_source $obj_header $obj_source $atof_source"
-links="host.h targ-env.h targ-cpu.h targ-cpu.c obj-format.h obj-format.c atof-targ.c"
-
-# Make the links.
-while [ -n "$files" ]
-do
-       # set file to car of files, files to cdr of files
-       set $files; file=$1; shift; files=$*
-       set $links; link=$1; shift; links=$*
-
-       if [ ! -r ${srcdir}/config/$file ]
-       then
-               echo "$progname: cannot create a link \`$link'," 1>&2
-               echo "since the file \`config/$file' does not exist." 1>&2
-               exit 1
-       fi
-
-       $remove -f $link
-       rm -f config.status
-       # Make a symlink if possible, otherwise try a hard link
-       $symbolic_link ${srcdir}/config/$file $link 2>/dev/null || $hard_link ${srcdir}/config/$file $link
-
-       if [ ! -r $link ]
-       then
-               echo "$progname: unable to link \`$link' to \`${srcdir}/config/$file'." 1>&2
-               exit 1
-       fi
-       echo "Linked \`$link' to \`${srcdir}/config/$file'."
-done
-
-# Build a Makefile
-
-# Install a makefile, and make it set srcdir
-# if necessary so that the sources are found.
-# Also change its value of srcdir.
-# Also create a .gdbinit file which runs the one in srcdir
-# and tells GDB to look there for source files.
-case $srcdir in
-.)
-       ;;
-*)
-       echo "VPATH = ${srcdir}" > x
-       cat x ${srcdir}/Makefile.in | sed "s@^srcdir = \.@srcdir = ${srcdir}@" > Makefile.in
-       rm x
-       echo "dir ." > .gdbinit
-       echo "dir ${srcdir}" >> .gdbinit
-       echo "source ${srcdir}/.gdbinit" >> .gdbinit
-       ;;
-esac
-
-# Conditionalize the makefile for this machine.
-if [ -f ${srcdir}/config/${host_make_var_file} ]
-then
-       sed -e "/####/  r ${srcdir}/config/${host_make_var_file}" Makefile.in > Makefile.tem
-else
-       cp Makefile.in Makefile.tem
-fi
-
-# Remove all formfeeds, since some Makes get confused by them.
-sed "s/\f//" Makefile.tem > Makefile.tem1
-
-# Delete the intermediate files
-rm Makefile.tem
-if [ x$srcdir != x. ]
-then
-       rm Makefile.in
-fi
-
-
-# actual Makefile starts here.
-
-echo "host = $host" > Makefile
-echo "target = $target" >> Makefile
-
-# Define macro CROSS_ASSEMBLE in compilation if this is a cross-assembler.
-if [ x$host = x$target ]
-then
-       sed "/^ALL=gas/s//ALL=bootstrap/" < Makefile.tem1 >> Makefile
-else
-       echo "CROSS=-DCROSS_ASSEMBLE" >> Makefile
-       cat Makefile.tem1 >> Makefile
-fi
-
-rm Makefile.tem1
-
-echo "Edited the makefile"
-
-if [ x$host = x$target ]
-then
-       echo "Links are now set up for use with a $target." \
-               | tee config.status
-else
-       echo "Links are now set up for host $host and target $target." \
-               | tee config.status
-fi
-
-exit 0
diff --git a/gas/doc/Makefile b/gas/doc/Makefile
deleted file mode 100755 (executable)
index 521f473..0000000
+++ /dev/null
@@ -1,94 +0,0 @@
-# Makefile for as.texinfo preprocessing and TeXing
-# $Id$
-# see pretex.m4 for discussion of preprocessor definitions
-
-# What version of the manual you want (see *.m4); "all" includes everything
-CONFIG=all
-
-# Sun/Berkeley m4 doesn't have all the things we need; use GNU or sV
-M4=gm4
-#M4=/usr/5bin/m4
-
-# Directory for gas source
-srcdir=..
-
-# Where to find texinfo.tex to format docn with TeX
-TEXIDIR = $(srcdir)/../texinfo/fsf
-
-as.info: as-${CONFIG}.texinfo
-       makeinfo -o as.info as-${CONFIG}.texinfo
-
-as.dvi:        as-${CONFIG}.texinfo
-       TEXINPUTS=${TEXIDIR}:.:$$TEXINPUTS tex as-${CONFIG}.texinfo
-       texindex as-${CONFIG}.??
-       TEXINPUTS=${TEXIDIR}:.:$$TEXINPUTS tex as-${CONFIG}.texinfo
-       mv as-${CONFIG}.dvi as.dvi
-       rm as-${CONFIG}.?? as-${CONFIG}.???
-
-# ROFF doc targets as.ms, as.mm, as.me
-# (we don't use a variable because we don't trust all makes to handle
-# a var in the target name right).
-# roff output (-ms)
-as.ms: as-${CONFIG}.texinfo
-       sed -e '/\\input texinfo/d' \
-               -e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
-               -e 's/{.*,,/{/' \
-               as-${CONFIG}.texinfo | \
-       texi2roff -ms >as.ms 
-
-# roff output (-mm)
-as.mm: as-${CONFIG}.texinfo
-       sed -e '/\\input texinfo/d' \
-               -e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
-               -e 's/{.*,,/{/' \
-               -e '/@noindent/d' \
-               as-${CONFIG}.texinfo | \
-       texi2roff -mm | \
-       sed -e 's/---/\\(em/g' \
-       >as.mm 
-
-# roff output (-me)
-as.me: as-${CONFIG}.texinfo
-       sed -e '/\\input texinfo/d' \
-               -e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
-               -e 's/{.*,,/{/' \
-               as-${CONFIG}.texinfo | \
-       texi2roff -me >as.me 
-
-
-
-as-all.texinfo: as.texinfo pretex.m4 none.m4 all.m4
-       ${M4} pretex.m4 none.m4 all.m4 as.texinfo >as-all.texinfo
-
-as-a29k.texinfo: as.texinfo pretex.m4 none.m4 a29k.m4
-       ${M4} pretex.m4 none.m4 a29k.m4 as.texinfo >as-a29k.texinfo
-
-as-a29k-coff.texinfo: as.texinfo pretex.m4 none.m4 a29k-coff.m4
-       ${M4} pretex.m4 none.m4 a29k-coff.m4 as.texinfo >as-a29k-coff.texinfo
-
-as-gen.texinfo: as.texinfo pretex.m4 none.m4 gen.m4
-       ${M4} pretex.m4 none.m4 gen.m4 as.texinfo >as-gen.texinfo
-
-as-h8.texinfo: as.texinfo pretex.m4 none.m4 h8.m4
-       ${M4} pretex.m4 none.m4 h8.m4 as.texinfo >as-h8.texinfo
-
-as-i80386.texinfo: as.texinfo pretex.m4 none.m4 i80386.m4
-       ${M4} pretex.m4 none.m4 i80386.m4 as.texinfo >as-i80386.texinfo
-
-as-i960.texinfo: as.texinfo pretex.m4 none.m4 i960.m4
-       ${M4} pretex.m4 none.m4 i960.m4 as.texinfo >as-i960.texinfo
-
-as-m680x0.texinfo: as.texinfo pretex.m4 none.m4 m680x0.m4
-       ${M4} pretex.m4 none.m4 m680x0.m4 as.texinfo >as-m680x0.texinfo
-
-as-sparc.texinfo: as.texinfo pretex.m4 none.m4 sparc.m4
-       ${M4} pretex.m4 none.m4 sparc.m4 as.texinfo >as-sparc.texinfo
-
-as-vax.texinfo: as.texinfo pretex.m4 none.m4 vax.m4
-       ${M4} pretex.m4 none.m4 vax.m4 as.texinfo >as-vax.texinfo
-
-as-vintage.texinfo: as.texinfo pretex.m4 none.m4 vintage.m4
-       ${M4} pretex.m4 none.m4 vintage.m4 as.texinfo >as-vintage.texinfo
-
-clean:
-       rm -f as-${CONFIG}.* as.dvi
diff --git a/gas/flonum-const.c b/gas/flonum-const.c
deleted file mode 100755 (executable)
index 6be9fde..0000000
+++ /dev/null
@@ -1,157 +0,0 @@
-/* flonum_const.c - Useful Flonum constants
-   Copyright (C) 1987, 1990, 1991, 1992 Free Software Foundation, Inc.
-   
-   This file is part of GAS, the GNU Assembler.
-   
-   GAS is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
-   any later version.
-   
-   GAS is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-   
-   You should have received a copy of the GNU General Public License
-   along with GAS; see the file COPYING.  If not, write to
-   the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-#include "flonum.h"
-/* JF:  I added the last entry to this table, and I'm not
-   sure if its right or not.  Could go either way.  I wish
-   I really understood this stuff. */
-
-
-const int table_size_of_flonum_powers_of_ten = 11;
-
-static const LITTLENUM_TYPE zero[] = {     1 };
-
-/***********************************************************************\
- *                                                                     *
- *     Warning: the low order bits may be WRONG here.                  *
- *     I took this from a suspect bc(1) script.                        *
- *     "minus_X"[] is supposed to be 10^(2^-X) expressed in base 2^16. *
- *     The radix point is just AFTER the highest element of the []     *
- *                                                                     *
- *     Because bc rounds DOWN for printing (I think), the lowest       *
- *     significance littlenums should probably have 1 added to them.   *
- *                                                                     *
- \***********************************************************************/
-
-/* JF:  If this equals 6553/(2^16)+39321/(2^32)+...  it approaches .1 */
-static const LITTLENUM_TYPE minus_1 [] = {
-       39321, 39321, 39321, 39321, 39321, 39321, 39321, 39321, 39321, 39321,
-       39321, 39321, 39321, 39321, 39321, 39321, 39321, 39321, 39321,  6553 };
-static const LITTLENUM_TYPE plus_1 [] = {    10                             };
-
-/* JF:  If this equals 655/(2^16) + 23592/(2^32) + ... it approaches .01 */
-static const LITTLENUM_TYPE minus_2 [] = {
-       10485, 36700, 62914, 23592, 49807, 10485, 36700, 62914, 23592, 49807,
-       10485, 36700, 62914, 23592, 49807, 10485, 36700, 62914, 23592,   655 };
-static const LITTLENUM_TYPE plus_2 [] = {   100                             };
-
-/* This approaches .0001 */
-static const LITTLENUM_TYPE minus_3 [] = {
-       52533, 20027, 37329, 65116, 64067, 60397, 14784, 18979, 33659, 19503,
-       2726,  9542,   629,  2202, 40475, 10590,  4299, 47815, 36280,     6 };
-static const LITTLENUM_TYPE plus_3 [] = { 10000                             };
-
-/* JF: this approaches 1e-8 */
-static const LITTLENUM_TYPE minus_4 [] = {
-       22516, 49501, 54293, 19424, 60699,  6716, 24348, 22618, 23904, 21327,
-       3919, 44703, 19149, 28803, 48959,  6259, 50273, 62237,    42        };
-/* This equals 1525 * 2^16 + 57600 */
-static const LITTLENUM_TYPE plus_4 [] = { 57600,  1525                      };
-
-/* This approaches 1e-16 */
-static const LITTLENUM_TYPE minus_5 [] = {
-       22199, 45957, 17005, 26266, 10526, 16260, 55017, 35680, 40443, 19789,
-       17356, 30195, 55905, 28426, 63010, 44197,  1844                      };
-static const LITTLENUM_TYPE plus_5 [] = { 28609, 34546,    35               };
-
-static const LITTLENUM_TYPE minus_6 [] = {
-       30926, 26518, 13110, 43018, 54982, 48258, 24658, 15209, 63366, 11929,
-       20069, 43857, 60487,    51                                           };
-static const LITTLENUM_TYPE plus_6 [] = { 61313, 34220, 16731, 11629,  1262 };
-
-static const LITTLENUM_TYPE minus_7 [] = {
-       29819, 14733, 21490, 40602, 31315, 65186,  2695                      };
-static const LITTLENUM_TYPE plus_7 [] = {
-       7937, 49002, 60772, 28216, 38893, 55975, 63988, 59711, 20227,    24 };
-
-static const LITTLENUM_TYPE minus_8 [] = {
-       45849, 19069, 18068, 36324, 37948, 48745, 10873, 64360, 15961, 20566,
-       24178, 15922, 59427,   110                                           };
-static const LITTLENUM_TYPE plus_8 [] = {
-       15873, 11925, 39177,   991, 14589, 19735, 25347, 65086, 53853,  938,
-       37209, 47086, 33626, 23253, 32586, 42547,  9731, 59679,  590         };
-
-static const LITTLENUM_TYPE minus_9 [] = {
-       63601, 55221, 43562, 33661, 29067, 28203, 65417, 64352, 22462, 41110,
-       12570, 28635, 23199, 50572, 28471, 27074, 46375, 64028, 13106, 63700,
-       32698, 17493, 32420, 34382, 22750, 20681, 12300                      };
-static const LITTLENUM_TYPE plus_9 [] = {
-       63564, 61556, 29377, 54467, 18621, 28141, 36415, 61241, 47119, 30026,
-       19740, 46002, 13541, 61413, 30480, 38664, 32205, 50593, 51112, 48904,
-       48263, 43814,   286, 30826, 52813, 62575, 61390, 24540, 21495,     5 };
-
-static const LITTLENUM_TYPE minus_10 [] = {
-       50313, 34681,  1464, 25889, 19575, 41125, 17635,  4598, 49708, 13427,
-       17287, 56115, 53783, 38255, 32415, 17778, 31596,  7557, 20951, 18477,
-       40353,  1178, 44405, 11837, 11571, 50963, 15649, 11698, 40675,  2308,  };
-static const LITTLENUM_TYPE plus_10[] = {
-       18520, 53764, 54535, 61910, 61962, 59843, 46270, 58053, 12473, 63785,
-       2449, 43230, 50044, 47595, 10403, 35766, 32607,  1124, 24966, 35044,
-       25524, 23631, 18826, 14518, 58448, 14562, 49618,  5588, 25396,    28 };
-
-static const LITTLENUM_TYPE minus_11 [] = {
-       6223, 59909, 62437, 59960, 14652, 45336, 48800,  7647, 51962, 37982,
-       60436, 58176, 26767,  8440,  9831, 48556, 20994, 14148,  6757, 17221,
-       60624, 46129, 53210, 44085, 54016, 24259, 11232, 21229, 21313,    81,  };
-static const LITTLENUM_TYPE plus_11 [] = {
-       36159,  2055, 33615, 61362, 23581, 62454,  9748, 15275, 39284, 58636,
-       16269, 42793, 47240, 45774, 50861, 48400,  9413, 40281,  4030,  9572,
-       7984, 33038, 59522, 19450, 40593, 24486, 54320,  6661, 55766,   805,  };
-
-/* Shut up complaints about differing pointer types.  They only differ
-   in the const attribute, but there isn't any easy way to do this
-   */
-#define X (LITTLENUM_TYPE *)
-
-const FLONUM_TYPE flonum_negative_powers_of_ten [] = {
-       {X zero,        X zero,         X zero,           0, '+'},
-       {X minus_1,     X minus_1 +19,  X minus_1  + 19, -20, '+'},
-       {X minus_2,     X minus_2 +19,  X minus_2  + 19, -20, '+'},
-       {X minus_3,     X minus_3 +19,  X minus_3  + 19, -20, '+'},
-       {X minus_4,     X minus_4 +18,  X minus_4  + 18, -20, '+'},
-       {X minus_5,     X minus_5 +16,  X minus_5  + 16, -20, '+'},
-       {X minus_6,     X minus_6 +13,  X minus_6  + 13, -20, '+'},
-       {X minus_7,     X minus_7 + 6,  X minus_7  +  6, -20, '+'},
-       {X minus_8,     X minus_8 +13,  X minus_8  + 13, -40, '+'},
-       {X minus_9,     X minus_9 +26,  X minus_9  + 26, -80, '+'},
-       {X minus_10,    X minus_10+29,  X minus_10 + 29,-136, '+'},
-       {X minus_11,    X minus_11+29,  X minus_11 + 29,-242, '+'},
-};
-
-const FLONUM_TYPE flonum_positive_powers_of_ten [] = {
-       {X zero,        X zero,         X zero,           0, '+'},
-       {X plus_1,      X plus_1  +  0, X plus_1  +  0,   0, '+'},
-       {X plus_2,      X plus_2  +  0, X plus_2  +  0,   0, '+'},
-       {X plus_3,      X plus_3  +  0, X plus_3  +  0,   0, '+'},
-       {X plus_4,      X plus_4  +  1, X plus_4  +  1,   0, '+'},
-       {X plus_5,      X plus_5  +  2, X plus_5  +  2,   1, '+'},
-       {X plus_6,      X plus_6  +  4, X plus_6  +  4,   2, '+'},
-       {X plus_7,      X plus_7  +  9, X plus_7  +  9,   4, '+'},
-       {X plus_8,      X plus_8  + 18, X plus_8  + 18,   8, '+'},
-       {X plus_9,      X plus_9  + 29, X plus_9  + 29,  24, '+'},
-       {X plus_10,     X plus_10 + 29, X plus_10 + 29,  77, '+'},
-       {X plus_11,     X plus_11 + 29, X plus_11 + 29, 183, '+'},
-};
-
-#ifdef VMS
-dummy1()
-{
-}
-#endif
-/* end of flonum_const.c */
diff --git a/gas/gas-format.el b/gas/gas-format.el
deleted file mode 100644 (file)
index 32c6426..0000000
+++ /dev/null
@@ -1,79 +0,0 @@
-;; -*- lisp-interaction -*-
-;; -*- emacs-lisp -*-
-;;
-;;
-;; originally from...
-;;     Rich's personal .emacs file.  feel free to copy.
-;;
-;; this file sets emacs up for the type of C source code formatting used within
-;; gas.  I don't use gnu indent.  If you do, and find a setup that approximates
-;; these settings, please send it to me.
-;;
-;; Last Mod Thu Feb 13 00:59:16 PST 1992, by rich@sendai
-;;
-
-;;
-;;
-;;     This section sets constants used by c-mode for formating
-;;
-;;
-
-
-;;  If `c-auto-newline' is non-`nil', newlines are inserted both
-;;before and after braces that you insert, and after colons and semicolons.
-;;Correct C indentation is done on all the lines that are made this way.
-
-(setq c-auto-newline nil)
-
-
-;;  If `c-tab-always-indent' is non-`nil', the TAB command
-;;in C mode does indentation only if point is at the left margin or within
-;;the line's indentation.  If there is non-whitespace to the left of point,
-;;then TAB just inserts a tab character in the buffer.  Normally,
-;;this variable is `nil', and TAB always reindents the current line.
-
-(setq c-tab-always-indent nil)
-
-;;  C does not have anything analogous to particular function names for which
-;;special forms of indentation are desirable.  However, it has a different
-;;need for customization facilities: many different styles of C indentation
-;;are in common use.
-;;
-;;  There are six variables you can set to control the style that Emacs C
-;;mode will use.
-;;
-;;`c-indent-level'     
-;;     Indentation of C statements within surrounding block.  The surrounding
-;;     block's indentation is the indentation of the line on which the
-;;     open-brace appears.
-
-(setq c-indent-level 8)
-
-;;`c-continued-statement-offset'     
-;;     Extra indentation given to a substatement, such as the then-clause of
-;;     an if or body of a while.
-
-(setq c-continued-statement-offset 4)
-
-;;`c-brace-offset'     
-;;     Extra indentation for line if it starts with an open brace.
-
-(setq c-brace-offset 0)
-
-;;`c-brace-imaginary-offset'     
-;;     An open brace following other text is treated as if it were this far
-;;     to the right of the start of its line.
-
-(setq c-brace-imaginary-offset 0)
-
-;;`c-argdecl-indent'     
-;;     Indentation level of declarations of C function arguments.
-
-(setq c-argdecl-indent 0)
-
-;;`c-label-offset'     
-;;     Extra indentation for line that is a label, or case or default.
-
-(setq c-label-offset -8)
-
-;; end of gas-format.el
diff --git a/gas/makefile.dos b/gas/makefile.dos
deleted file mode 100755 (executable)
index c146e19..0000000
+++ /dev/null
@@ -1,593 +0,0 @@
-# Makefile for GNU Assembler
-#   Copyright (C) 1987, 1988, 1990, 1991 Free Software Foundation, Inc.
-
-#This file is part of GNU GAS.
-
-#GNU GAS is free software; you can redistribute it and/or modify
-#it under the terms of the GNU General Public License as published by
-#the Free Software Foundation; either version 1, or (at your option)
-#any later version.
-
-#GNU GAS is distributed in the hope that it will be useful,
-#but WITHOUT ANY WARRANTY; without even the implied warranty of
-#MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-#GNU General Public License for more details.
-
-#You should have received a copy of the GNU General Public License
-#along with GNU GAS; see the file COPYING.  If not, write to
-#the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
-
-# $Id$
-
-# The targets for external use include:
-# all, doc, proto, install, uninstall, includes, TAGS,
-# clean, cleanconfig, realclean, stage1, stage2, stage3, stage4.
-
-# Variables that exist for you to override.
-# See below for how to change them for certain systems.
-
-LIBDEPS=
-CROSS=
-HDEFINES=
-CPPFLAGS=
-
-ALLOCA =
-CFLAGS = -g -D__MSDOS__ -D__GO32__ -I../include
-INTERNAL_CFLAGS = $(CROSS)
-OLDCC = cc
-BISON = bison
-BISONFLAGS = -v
-AR = ar
-OLDAR_FLAGS = qc
-AR_FLAGS = rc
-SHELL = /bin/sh
-# on sysV, define this as cp.
-INSTALL = install -c
-# These permit overriding just for certain files.
-INSTALL_PROGRAM = $(INSTALL)
-INSTALL_FILE = $(INSTALL)
-
-# Define this as & to perform parallel make on a Sequent.
-# Note that this has some bugs, and it seems currently necessary 
-# to compile all the gen* files first by hand to avoid erroneous results.
-P =
-
-# How to invoke ranlib.
-RANLIB = ranlib
-# Test to use to see whether ranlib exists on the system.
-RANLIB_TEST = [ -f /usr/bin/ranlib -o -f /bin/ranlib ]
-
-# CFLAGS for use with OLDCC, for compiling gnulib.
-# NOTE: -O does not work on some Unix systems!
-CCLIBFLAGS = -O
-
-# Version of ar to use when compiling gnulib. 
-OLDAR = ar
-
-version=`$(unsubdir)/../gcc$(subdir)/gcc -dumpversion`
-
-# Directory where sources are, from where we are.
-srcdir = .
-# Common prefix for installation directories.
-# NOTE: This directory must exist when you start installation.
-ddestdir = /usr/local
-# Directory in which to put the executable for the command `gcc'
-bindir = $(ddestdir)/bin
-# Directory in which to put the directories used by the compiler.
-libdir = $(ddestdir)/lib
-# Directory in which the compiler finds executables, libraries, etc.
-libsubdir = $(libdir)/gcc/$(target_alias)/$(version)
-# Number to put in man-page filename.
-manext = 1
-# Directory in which to put man pages.
-mandir = $(destdir)/H-independent/man/man$(manext)
-
-# Additional system libraries to link with.
-CLIB=
-
-# Specify the rule for actually making gnulib.
-GNULIB = gnulib.portable
-
-# Specify the rule for actually making gnulib2.
-GNULIB2 = gnulib2.portable
-
-# List of extra C and assembler files to add to gnulib.
-# Assembler files should have names ending in `.asm'.
-LIBFUNCS_EXTRA = 
-
-# Program to convert libraries.
-LIBCONVERT = 
-
-# Control whether header files are installed.
-INSTALL_HEADERS=install-headers
-
-# Change this to empty to prevent installing limits.h
-LIMITS_H = limits.h
-
-# Directory to link to, when using the target `maketest'.
-DIR = ../gcc
-
-# For better debugging under COFF, define SEPARATE_AUX_OUTPUT in config.h
-# and define the following variable as `aux-output2.c' in make-...
-AUX_OUTPUT2 =
-
-# Flags to use when cross-building GCC.
-# Prefix to apply to names of object files when using them
-# to run on the machine we are compiling on.
-HOST_PREFIX=
-# Prefix to apply to names of object files when compiling them
-# to run on the machine we are compiling on.
-# The default for this variable is chosen to keep these rules 
-# out of the way of the other rules for compiling the same source files.
-HOST_PREFIX_1=loser-
-HOST_CC=$(CC)
-HOST_CFLAGS=$(ALL_CFLAGS)
-HOST_LDFLAGS=$(LDFLAGS)
-HOST_CPPFLAGS=$(CPPFLAGS)
-
-# Choose the real default target.
-ALL=as.new
-
-# End of variables for you to override.
-
-# Lists of files for various purposes.
-
-REAL_SOURCES = \
-       app.c \
-       as.c \
-       atof-generic.c \
-       bignum-copy.c \
-       cond.c \
-       expr.c \
-       fn-const.c \
-       fn-copy.c \
-       flonum-mult.c \
-       frags.c \
-       hash.c \
-       hex-value.c \
-       input-file.c \
-       input-scrub.c \
-       messages.c \
-       output-file.c \
-       read.c \
-       strstr.c \
-       subsegs.c \
-       symbols.c \
-       version.c \
-       write.c \
-       xmalloc.c \
-       xrealloc.c
-
-# in an expedient order
-LINKED_SOURCES = \
-       targ-cpu.c \
-       obj-format.c \
-       atof-targ.c
-
-SOURCES = $(LINKED_SOURCES) $(REAL_SOURCES)
-
-REAL_HEADERS = \
-       as.h \
-       bignum.h \
-       expr.h \
-       flonum.h \
-       frags.h \
-       hash.h \
-       input-file.h \
-       tc.h \
-       obj.h \
-       read.h \
-       struc-symbol.h \
-       subsegs.h \
-       symbols.h \
-       syscalls.h \
-       write.h
-
-LINKED_HEADERS = \
-       a.out.gnu.h \
-       a.out.h \
-       host.h \
-       targ-env.h \
-       targ-cpu.h \
-       obj-format.h \
-       atof-targ.h
-
-HEADERS = $(LINKED_HEADERS) $(REAL_HEADERS)
-
-OBJS = \
-       targ-cpu.o \
-       obj-format.o \
-       atof-targ.o \
-       app.o \
-       as.o \
-       atof-generic.o \
-       bignum-copy.o \
-       cond.o \
-       expr.o \
-       fn-const.o \
-       fn-copy.o \
-       flonum-mult.o \
-       frags.o \
-       hash.o \
-       hex-value.o \
-       input-file.o \
-       input-scrub.o \
-       messages.o \
-       output-file.o \
-       read.o \
-       strstr.o \
-       subsegs.o \
-       symbols.o \
-       version.o \
-       write.o \
-       xmalloc.o \
-       xrealloc.o
-
-#### host, target, and site specific Makefile frags come in here.
-TARG_CPU_DEPENDENTS=../include/h8300-opcode.h
-LOCAL_LOADLIBES=../bfd/libbfd.a
-TDEFINES=-DBFD -DBFD_HEADERS -DMANY_SEGMENTS
-
-
-# Definition of `all' is here so that new rules inserted by sed
-# do not specify the default target.
-# The real definition is under `all.internal'.
-
-all: $(ALL)
-all-info:
-install-info:
-
-fake-as: force
-       - rm -f ./as.new
-       cp /bin/as ./fake-as
-
-# Now figure out from those variables how to compile and link.
-
-# This is the variable actually used when we compile.
-ALL_CFLAGS = $(INTERNAL_CFLAGS) $(CFLAGS) $(HDEFINES) $(TDEFINES)
-
-# Even if ALLOCA is set, don't use it if compiling with GCC.
-USE_ALLOCA= `if [ x"${CC}" = x"${OLDCC}" ] ; then echo ${ALLOCA}; else true; fi`
-USE_HOST_ALLOCA= `if [ x"${CC}" = x"${OLDCC}" ] ; then echo ${HOST_PREFIX}${ALLOCA}; else true; fi`
-
-# Likewise, for use in the tools that must run on this machine
-# even if we are cross-building GCC.
-# We don't use USE_ALLOCA because backquote expansion doesn't work in deps.
-HOST_LIBDEPS= $(HOST_PREFIX)$(OBSTACK) $(HOST_PREFIX)$(ALLOCA) $(HOST_PREFIX)$(MALLOC)
-
-# How to link with both our special library facilities
-# and the system's installed libraries.
-
-LIBS = $(LOCAL_LOADLIBES) $(CLIB) $(unsubdir)/../libiberty$(subdir)/libiberty.a
-
-# Likewise, for use in the tools that must run on this machine
-# even if we are cross-building GCC.
-HOST_LIBS = $(HOST_PREFIX)$(OBSTACK) $(USE_HOST_ALLOCA) $(HOST_PREFIX)$(MALLOC) $(CLIB) 
-
-# Specify the directories to be searched for header files.
-# Both . and srcdir are used, in that order,
-# so that tm.h and config.h will be found in the compilation
-# subdirectory rather than in the source directory.
-INCLUDES = -I. -I$(srcdir) -Iconfig
-SUBDIR_INCLUDES = -I.. -I../$(srcdir) -I../config
-
-# Always use -Iconfig when compiling.
-.c.o:
-       $(CC) -c $(ALL_CFLAGS) $(CPPFLAGS) $(INCLUDES) $<
-
-# This tells GNU make version 3 not to export all the variables
-# defined in this file into the environment.
-.NOEXPORT:
-\f
-# Files to be copied away after each stage in building.
-STAGE_GCC=gcc
-STAGESTUFF = *.o as.new
-
-# The files that "belong" in CONFIG_H are deliberately omitted
-# because having them there would not be useful in actual practice.
-# All they would do is cause complete recompilation every time
-# one of the machine description files is edited.
-# That may or may not be what one wants to do.
-# If it is, rm *.o is an easy way to do it.
-# CONFIG_H = config.h tm.h
-CONFIG_H =
-\f
-as.new: $(OBJS) $(LIBDEPS)
-       -mv -f as.new as.old
-       >as.rf $(ALL_CFLAGS) $(LDFLAGS) -o as.new $(OBJS) $(LIBS) $(LOADLIBES)
-       $(CC) @as.rf
-
-objdump:
-
-all.internal: native
-# This is what is made with the host's compiler if making a cross assembler.
-native: config.status as
-
-config.status:
-       @echo You must configure gas.  Look at the INSTALL file for details.
-       @false
-
-compilations: ${OBJS}
-
-# Compiling object files from source files.
-
-app.o : app.c as.h host.h targ-env.h obj-format.h \
-  targ-cpu.h struc-symbol.h \
-  write.h flonum.h bignum.h expr.h frags.h hash.h read.h symbols.h tc.h obj.h 
-as.o : as.c as.h host.h targ-env.h obj-format.h \
-  targ-cpu.h struc-symbol.h \
-  write.h flonum.h bignum.h expr.h frags.h hash.h read.h symbols.h tc.h obj.h 
-atof-generic.o : atof-generic.c as.h host.h targ-env.h obj-format.h \
-  targ-cpu.h struc-symbol.h \
-  write.h flonum.h bignum.h expr.h frags.h hash.h read.h symbols.h tc.h obj.h 
-bignum-copy.o : bignum-copy.c as.h host.h \
-  targ-env.h obj-format.h \
-  targ-cpu.h struc-symbol.h \
-  write.h flonum.h bignum.h expr.h frags.h hash.h read.h symbols.h tc.h obj.h 
-cond.o : cond.c as.h host.h targ-env.h obj-format.h \
-  targ-cpu.h struc-symbol.h \
-  write.h flonum.h bignum.h expr.h frags.h hash.h read.h symbols.h tc.h obj.h \
-   
-debug.o : debug.c as.h host.h targ-env.h obj-format.h \
-  targ-cpu.h struc-symbol.h \
-  write.h flonum.h bignum.h expr.h frags.h hash.h read.h symbols.h tc.h obj.h \
-  subsegs.h 
-expr.o : expr.c as.h host.h targ-env.h obj-format.h \
-  targ-cpu.h  struc-symbol.h \
-  write.h flonum.h bignum.h expr.h frags.h hash.h read.h symbols.h tc.h obj.h \
-   
-fn-const.o : fn-const.c flonum.h bignum.h 
-fn-copy.o : fn-copy.c as.h host.h targ-env.h obj-format.h \
-  targ-cpu.h  struc-symbol.h \
-  write.h flonum.h bignum.h expr.h frags.h hash.h read.h symbols.h tc.h obj.h 
-flonum-mult.o : flonum-mult.c flonum.h bignum.h 
-frags.o : frags.c as.h host.h targ-env.h obj-format.h \
-  targ-cpu.h  struc-symbol.h \
-  write.h flonum.h bignum.h expr.h frags.h hash.h read.h symbols.h tc.h obj.h \
-  subsegs.h  
-hash.o : hash.c as.h host.h targ-env.h obj-format.h \
-  targ-cpu.h  struc-symbol.h \
-  write.h flonum.h bignum.h expr.h frags.h hash.h read.h symbols.h tc.h obj.h 
-hex-value.o : hex-value.c 
-input-file.o : input-file.c as.h host.h \
-   targ-env.h obj-format.h targ-cpu.h \
-   struc-symbol.h write.h flonum.h bignum.h expr.h \
-  frags.h hash.h read.h symbols.h tc.h obj.h input-file.h 
-input-scrub.o : input-scrub.c \
-  as.h host.h targ-env.h obj-format.h \
-  targ-cpu.h  struc-symbol.h \
-  write.h flonum.h bignum.h expr.h frags.h hash.h read.h symbols.h tc.h obj.h \
-  input-file.h 
-messages.o : messages.c as.h host.h targ-env.h obj-format.h \
-  targ-cpu.h  struc-symbol.h \
-  write.h flonum.h bignum.h expr.h frags.h hash.h read.h symbols.h tc.h obj.h
-obstack.o : obstack.c  
-output-file.o : output-file.c as.h host.h targ-env.h obj-format.h \
-  targ-cpu.h  struc-symbol.h \
-  write.h flonum.h bignum.h expr.h frags.h hash.h read.h symbols.h tc.h obj.h \
-  output-file.h 
-read.o : read.c as.h host.h targ-env.h obj-format.h \
-  targ-cpu.h  struc-symbol.h \
-  write.h flonum.h bignum.h expr.h frags.h hash.h read.h symbols.h tc.h obj.h \
-   
-strstr.o : strstr.c   
-subsegs.o : subsegs.c as.h host.h targ-env.h obj-format.h \
-  targ-cpu.h  struc-symbol.h \
-  write.h flonum.h bignum.h expr.h frags.h hash.h read.h symbols.h tc.h obj.h \
-  subsegs.h  
-symbols.o : symbols.c as.h host.h targ-env.h obj-format.h \
-  targ-cpu.h  struc-symbol.h \
-  write.h flonum.h bignum.h expr.h frags.h hash.h read.h symbols.h tc.h obj.h \
-   subsegs.h 
-version.o : version.c 
-write.o : write.c as.h host.h targ-env.h obj-format.h \
-  targ-cpu.h  struc-symbol.h \
-  write.h flonum.h bignum.h expr.h frags.h hash.h read.h symbols.h tc.h obj.h \
-  subsegs.h  output-file.h 
-xmalloc.o : xmalloc.c
-xrealloc.o : xrealloc.c 
-atof-targ.o : atof-targ.c as.h host.h targ-env.h obj-format.h \
-  targ-cpu.h struc-symbol.h \
-  write.h flonum.h bignum.h expr.h frags.h hash.h read.h \
-  symbols.h tc.h obj.h 
-obj-format.o : obj-format.c as.h host.h targ-env.h obj-format.h \
-  targ-cpu.h struc-symbol.h \
-  write.h flonum.h bignum.h expr.h frags.h hash.h read.h \
-  symbols.h tc.h obj.h  
-targ-cpu.o : targ-cpu.c targ-env.h obj-format.h \
-  targ-cpu.h struc-symbol.h \
-  write.h flonum.h bignum.h expr.h frags.h hash.h read.h \
-  symbols.h tc.h obj.h $(TARG_CPU_DEPENDENTS)
-
-\f
-# Compile the libraries to be used by gen*.
-# If we are not cross-building, gen* use the same .o's that cc1 will use,
-# and HOST_PREFIX_1 is `foobar', just to ensure these rules don't conflict
-# with the rules for rtl.o, alloca.o, etc.
-$(HOST_PREFIX_1)alloca.o: alloca.c
-       rm -f $(HOST_PREFIX)alloca.c
-       cp alloca.c $(HOST_PREFIX)alloca.c
-       $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(HOST_PREFIX)alloca.c
-
-$(HOST_PREFIX_1)obstack.o: obstack.c
-       rm -f $(HOST_PREFIX)obstack.c
-       cp obstack.c $(HOST_PREFIX)obstack.c
-       $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(HOST_PREFIX)obstack.c
-
-$(HOST_PREFIX_1)malloc.o: malloc.c
-       rm -f $(HOST_PREFIX)malloc.c
-       cp malloc.c $(HOST_PREFIX)malloc.c
-       $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(HOST_PREFIX)malloc.c
-\f
-# Remake the info files.
-
-doc: as.info
-
-as.info: doc/as.texinfo
-       (cd doc; make as.info; mv as.info $srcdir)      
-
-\f
-# Deletion of files made during compilation.
-# There are three levels of this: `clean', `cleanconfig' and `realclean'.
-# `clean' deletes what you want to delete ordinarily to save space.
-# This is most, but not all, of the files made by compilation.
-# `cleanconfig' also deletes everything depending
-# on the choice of config files.
-# `realclean' also deletes everything that could be regenerated automatically.
-
-clean:
-       -rm -f $(STAGESTUFF)
-# Delete the temporary source copies for cross compilation.
-       -rm -f $(HOST_PREFIX_1)alloca.c $(HOST_PREFIX_1)malloc.c
-       -rm -f $(HOST_PREFIX_1)obstack.c 
-# Delete the stamp files except stamp-gnulib2.
-       -rm -f core
-
-# Like clean but also delete the links made to configure gas.
-cleanconfig: clean
-       -rm -f config.status Makefile host.h targ-env.h
-       -rm -f targ-cpu.h targ-cpu.c
-       -rm -f obj-format.h obj-format.c
-       -rm -f atof-targ.c
-
-# Get rid of every file that's generated from some other file (except INSTALL).
-realclean: cleanconfig
-       -rm -f gas.aux gas.cps gas.fns gas.info gas.kys gas.pgs gas.tps gas.vrs
-       -rm -f TAGS 
-       -rm -f gas.info* gas.?? gas.??s gas.log gas.toc gas.*aux
-       -rm -f *.dvi
-\f
-# Entry points `install', `includes' and `uninstall'.
-
-# Copy the files into directories where they will be run.
-install: $(ALL)
-       $(INSTALL_PROGRAM) $(ALL) $(libsubdir)/as
-#      cp $(ALL) $(bindir)/as.new
-#      mv -f $(bindir)/as.new $(bindir)/as
-
-# Create the installation directory.
-install-dir:
-       -mkdir $(libdir)
-       -mkdir $(libdir)/gcc
-       -mkdir $(libdir)/gcc/$(target)
-       -mkdir $(libdir)/gcc/$(target)/$(version)
-
-# Install the compiler executables built during cross compilation.
-install-cross: native install-dir
-       -if [ -f cc1 ] ; then $(INSTALL_PROGRAM) cc1 $(libsubdir)/cc1; else true; fi
-       -if [ -f cc1plus ] ; then $(INSTALL_PROGRAM) cc1plus $(libsubdir)/cc1plus; else true; fi
-       $(INSTALL_PROGRAM) cpp $(libsubdir)/cpp
-       ./gcc -dumpspecs > $(libsubdir)/specs
-       $(INSTALL_PROGRAM) gcc $(bindir)/gcc
-
-# Install the man pages.
-install-man: install-dir gcc.1 protoize.1 unprotoize.1
-       $(INSTALL_FILE) gcc.1 $(mandir)/gcc.$(manext)
-       chmod a-x $(mandir)/gcc.$(manext)
-       $(INSTALL_FILE) protoize.1 $(mandir)/protoize.$(manext)
-       chmod a-x $(mandir)/protoize.$(manext)
-       $(INSTALL_FILE) unprotoize.1 $(mandir)/unprotoize.$(manext)
-       chmod a-x $(mandir)/unprotoize.$(manext)
-
-# Cancel installation by deleting the installed files.
-uninstall:
-       -rm -rf $(libsubdir)
-       -rm -rf $(bindir)/as
-       -rm -rf $(mandir)/gas.$(manext)
-
-\f
-# These exist for maintenance purposes.
-
-tags TAGS: force
-       etags $(REAL_SOURCES) $(REAL_HEADERS) README Makefile config/*.[hc]
-       
-bootstrap: $(ALL) force
-       $(MAKE) stage1
-       $(MAKE) CC="$(CC)" CFLAGS="-O -Bstage1/ $(CFLAGS)" libdir=$(libdir) ALLOCA= $(ALL)
-       $(MAKE) stage2
-       $(MAKE) CC="$(CC)" CFLAGS="-O -Bstage2/ $(CFLAGS)" libdir=$(libdir) ALLOCA= $(ALL)
-       $(MAKE) comparison against=stage2
-
-bootstrap2: force
-       $(MAKE) CC="$(CC)" CFLAGS="-O -Bstage1/ $(CFLAGS)" libdir=$(libdir) ALLOCA= $(ALL)
-       $(MAKE) stage2
-       $(MAKE) CC="$(CC)" CFLAGS="-O -Bstage2/ $(CFLAGS)" libdir=$(libdir) ALLOCA= $(ALL)
-       $(MAKE) comparison against=stage2
-
-bootstrap3: force
-       $(MAKE) CC="$(CC)" CFLAGS="-O -Bstage2/ $(CFLAGS)" libdir=$(libdir) ALLOCA= $(ALL)
-       $(MAKE) comparison against=stage2
-
-# Copy the object files from a particular stage into a subdirectory.
-stage1: force
-       -mkdir stage1
-       -mv $(STAGESTUFF) stage1
-       if [ -f stage1/as.new -a ! -f stage1/as ] ; then (cd stage1 ; ln -s as.new as) ; fi
-
-stage2: force
-       -mkdir stage2
-       -mv $(STAGESTUFF) stage2
-       if [ -f stage2/as.new -a ! -f stage2/as ] ; then (cd stage2 ; ln -s as.new as) ; fi
-
-stage3: force
-       -mkdir stage3
-       -mv $(STAGESTUFF) stage3
-       if [ -f stage3/as.new -a ! -f stage3/as ] ; then (cd stage3 ; ln -s as.new as) ; fi
-
-against=stage2
-
-comparison: force
-       for i in $(STAGESTUFF) ; do cmp $$i $(against)/$$i ; done
-
-de-stage1: force
-       - (cd stage1 ; rm as ; mv -f * ..)
-       - rmdir stage1
-
-de-stage2: force
-       - (cd stage2 ; rm as ; mv -f * ..)
-       - rmdir stage2
-
-de-stage3: force
-       - (cd stage3 ; rm as ; mv -f * ..)
-       - rmdir stage3
-
-# Copy just the executable files from a particular stage into a subdirectory,
-# and delete the object files.  Use this if you're just verifying a version
-# that is pretty sure to work, and you are short of disk space.
-risky-stage1: force
-       -mkdir stage1
-       -mv cc1 cpp cccp gcc stage1
-       -rm -f stage1/gnulib
-       -cp gnulib stage1 && $(RANLIB) stage1/gnulib
-       -make clean
-
-risky-stage2: force
-       -mkdir stage2
-       -mv cc1 cpp cccp gcc stage2
-       -rm -f stage2/gnulib
-       -cp gnulib stage2 && $(RANLIB) stage2/gnulib
-       -make clean
-
-risky-stage3: force
-       -mkdir stage3
-       -mv cc1 cpp cccp gcc stage3
-       -rm -f stage3/gnulib
-       -cp gnulib stage3 && $(RANLIB) stage3/gnulib
-       -make clean
-
-risky-stage4: force
-       -mkdir stage4
-       -mv cc1 cpp cccp gcc stage4
-       -rm -f stage4/gnulib
-       -cp gnulib stage4 && $(RANLIB) stage4/gnulib
-       -make clean
-
-#In GNU Make, ignore whether `stage*' exists.
-.PHONY: stage1 stage2 stage3 stage4 clean realclean TAGS bootstrap
-.PHONY: risky-stage1 risky-stage2 risky-stage3 risky-stage4
-
-force:
-
-Makefile: Makefile.in $(host_makefile_frag) $(target_makefile_frag)
-       $(SHELL) ./config.status
-
diff --git a/gas/objdump.c b/gas/objdump.c
deleted file mode 100755 (executable)
index 20ad39e..0000000
+++ /dev/null
@@ -1,2232 +0,0 @@
-/* objdump -- dump information about an object file.
-   Copyright (C) 1988, 1991 Free Software Foundation, Inc.
-
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 1, or (at your option)
-   any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software
-   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-/* $Id$ */
-
-/*
- * objdump
- * 
- * dump information about an object file.  Until there is other documentation,
- * refer to the manual page dump(1) in the system 5 program's reference manual
- */
-#include <stdio.h>
-#include <assert.h>
-
-#include "getopt.h"
-
-#include "as.h"
-
-/* #define COFF_ENCAPSULATE 1 */
-
-typedef FILHDR fileheader;
-typedef struct exec fileheader; 
-
-#ifdef __STDC__
-static char *sym_pname(SYMENT *s);
-static char *xmalloc(unsigned size);
-static char *xrealloc(char *p, unsigned size);
-static void doit(char *filename);
-static void dump_data(fileheader *execp, FILE *f){};
-static void dump_header(fileheader *execp, FILE *f);
-static void dump_lnno(fileheader *execp, FILE *f);
-static void dump_nstuff(fileheader *execp){};
-static void dump_reloc(fileheader *execp, FILE *f);
-static void dump_section_contents(fileheader *execp, FILE *f);
-static void dump_section_headers(fileheader *execp, FILE *f);
-static void dump_sym(fileheader *execp, FILE *f);
-static void dump_text(fileheader *execp, FILE *f){};
-static void hex_dump(void *buffer, int size);
-#endif /* __STDC__ */
-
-#ifndef OBJ_COFF
-#ifndef OBJ_BOUT
-static void read_symbols (execp, f)
-#else
-read_symbols (execp, f)
-#endif /* OBJ_BOUT */
-struct exec *execp;
-#else
-static void read_section_headers(execp, f)
-fileheader *execp;
-#endif /* OBJ_COFF */
-FILE *f;
-{
-#ifndef OBJ_COFF
-       int i;
-       struct nlist *sp;
-       if (symtbl)
-               return;
-       nsyms = execp->a_syms / sizeof (struct nlist);
-       if (nsyms == 0)
-#else
-       if (section_headers || execp->f_nscns == 0) {
-#endif /* OBJ_COFF */
-               return;
-#ifdef OBJ_COFF
-       } /* already read them, or don't need to */
-#endif /* OBJ_COFF */
-
-#ifndef OBJ_COFF
-       symtbl = (struct nlist *)xmalloc (nsyms * sizeof (struct nlist));
-#else
-       fseek(f, sizeof(*execp) + execp->f_opthdr, 0);
-       section_headers = (struct scnhdr *) xmalloc(execp->f_nscns * sizeof(*section_headers));
-#endif /* OBJ_COFF */
-
-#ifndef OBJ_COFF
-#ifndef OBJ_BOUT
-       fseek(f, N_STROFF(*execp), 0);
-       if (fread((char *)&strsize, sizeof strsize, 1, f) != 1) {
-               fprintf(stderr, "%s: can not read string table size\n",
-#else
-       fseek (f, N_STROFF(*execp), 0);
-       if (fread ((char *)&strsize, sizeof strsize, 1, f) != 1) {
-               fprintf (stderr, "%s: can not read string table size\n",
-#endif /* OBJ_BOUT */
-                        program_name);
-               exit (1);
-       }
-       strtbl = xmalloc (strsize);
-#ifndef OBJ_BOUT
-       fseek(f, N_STROFF (*execp), 0);
-       if (fread(strtbl, 1, strsize, f) != strsize) {
-               fprintf(stderr, "%s: error reading string table\n",
-#else
-       fseek (f, N_STROFF (*execp), 0);
-       if (fread (strtbl, 1, strsize, f) != strsize) {
-               fprintf (stderr, "%s: error reading string table\n",
-#endif /* OBJ_BOUT */
-                        program_name);
-               exit (1);
-       }
-#else
-       if (fread(section_headers, execp->f_nscns * sizeof(*section_headers), 1, f) != 1) {
-               perror("error reading section headers");
-               abort();
-       } /* on error */
-#endif /* OBJ_COFF */
-
-#ifndef OBJ_COFF
-#ifndef OBJ_BOUT
-       fseek(f, N_SYMOFF (*execp), 0);
-       if (fread((char *)symtbl, sizeof (struct nlist), nsyms, f) != nsyms) {
-               fprintf(stderr, "%s: error reading symbol table\n",
-#else
-       fseek (f, N_SYMOFF (*execp), 0);
-       if (fread ((char *)symtbl, sizeof (struct nlist), nsyms, f) != nsyms) {
-               fprintf (stderr, "%s: error reading symbol table\n",
-#endif /* OBJ_BOUT */
-                        program_name);
-               exit (1);
-       }
-#else
-       return;
-} /* read_section_headers() */
-#endif /* OBJ_COFF */
-
-#ifndef OBJ_COFF
-       for (i = 0, sp = symtbl; i < nsyms; i++, sp++) {
-               if (sp->n_un.n_strx == 0)
-                       sp->n_un.n_name = "";
-               else if (sp->n_un.n_strx < 0 || sp->n_un.n_strx > strsize)
-                       sp->n_un.n_name = "<bad string table index>";
-               else
-                       sp->n_un.n_name = strtbl + sp->n_un.n_strx;
-       }
-#ifndef OBJ_BOUT
-} /* read_symbols() */
-#else
-}
-#endif /* OBJ_BOUT */
-#else
-static SYMENT *symbols = NULL;
-static int longest_symbol_name = SYMNMLEN;
-#endif /* OBJ_COFF */
-
-#ifndef OBJ_COFF
-#ifndef OBJ_BOUT
-static void free_symbols ()
-#else
-free_symbols ()
-#endif /* OBJ_BOUT */
-#else
-static void read_symbols(execp, f)
-fileheader *execp;
-FILE *f;
-#endif /* OBJ_COFF */
-{
-#ifdef OBJ_COFF
-       long here;
-       int bufsiz = execp->f_nsyms * sizeof(struct syment);
-       SYMENT *s;
-       
-       if (symbols || bufsiz == 0) {
-               return;
-       } /* already read, or don't need to */
-
-       symbols = (SYMENT *) xmalloc(bufsiz);
-       
-       /* read symbols */
-       fseek(f, execp->f_symptr, 0);
-       if (fread(symbols, bufsiz, 1, f) != 1) {
-               fprintf(stderr, "error reading symbol table.\n");
-               abort();
-       } /* on error */
-       
-       here = ftell(f);
-       fseek(f, 0, 2); /* find end of file */
-
-       if (here != ftell(f)) {
-               /* find string table size */
-               fseek(f, here, 0);
-               if (fread(&strsize, sizeof(strsize), 1, f) != 1) {
-                       perror("error reading string table size");
-                       abort();
-               } /* on error */
-               
-               /* read string table if there is one */
-               if (strsize > 0) {
-                       strtbl = xmalloc(strsize);
-                       fseek(f, -sizeof(strsize), 1); /* backup over size count */
-                       
-                       if (fread(strtbl, strsize, 1, f) != 1) {
-                               perror("error reading string table");
-                               abort();
-                       } /* on error */
-                       
-                       /* then connect the dots. */
-                       for (s = symbols; s < symbols + execp->f_nsyms; ++s) {
-                               if (!s->n_zeroes) {
-                                       int l;
-                                       
-                                       s->n_offset = (long) strtbl + s->n_offset;
-                                       l = strlen((char *) s->n_offset);
-                                       if (l > longest_symbol_name) {
-                                               longest_symbol_name = l;
-                                       } /* keep max */
-                               } /* "long" name */
-                               
-                               s += s->n_numaux; /* skip aux entries */
-                       } /* walk the symbol table */
-               } else {
-                       fprintf(stderr, "Well, now that's weird.  I have a string table whose size is zero?\n");
-               } /* if there is a string table */
-       } /* if there is a string table */
-       return;
-} /* read_symbols() */
-
-#ifdef comment
-static void free_symbols() {
-#endif /* OBJ_COFF */
-       if (symtbl)
-               free (symtbl);
-       symtbl = NULL;
-       if (strtbl)
-               free (strtbl);
-       strtbl = NULL;
-#ifndef OBJ_COFF
-#ifndef OBJ_BOUT
-#endif /* OBJ_COFF */
-} /* free_symbols() */
-#ifndef OBJ_COFF
-#else
-}
-#endif /* OBJ_BOUT */
-#else
-#endif /* comment */
-#endif /* OBJ_COFF */
-
-#ifndef OBJ_COFF
-
-#ifndef OBJ_BOUT
-static void usage ()
-#else
-usage ()
-#endif /* OBJ_BOUT */
-{
-#ifndef OBJ_BOUT
-#else
-static void usage() {
-#endif /* OBJ_COFF */
-       (void) fprintf(stderr, "Usage: %s\n", program_name);
-       (void) fprintf(stderr, "\t[-ahnrt] [+all] [+header] [+nstuff]\n");
-       (void) fprintf(stderr, "\t[+reloc] [+symbols] [+text] [+data]\n");
-       (void) fprintf(stderr, "\t[+omit-symbol-numbers] [+omit-reloc-numbers]\n");
-       (void) fprintf(stderr, "\tfile...\n");
-#ifndef OBJ_COFF
-#else
-       fprintf (stderr, "\
-Usage: %s [-hnrt] [+header] [+nstuff] [+reloc] [+symbols] file...\n",
-                program_name);
-#endif /* OBJ_BOUT */
-#endif /* OBJ_COFF */
-       exit (1);
-#ifndef OBJ_COFF
-}
-#else
-} /* usage() */
-#endif /* OBJ_COFF */
-
-#ifndef OBJ_COFF
-#ifndef OBJ_BOUT
-#endif /* OBJ_COFF */
-static int aflag = 0;
-static int hflag = 0;
-#ifdef OBJ_COFF
-static int lflag = 0;
-#endif /* OBJ_COFF */
-static int nflag = 0;
-static int rflag = 0;
-#ifdef OBJ_COFF
-static int sflag = 0;
-#endif /* OBJ_COFF */
-static int tflag = 0;
-static int Dflag = 0;
-static int Tflag = 0;
-static int omit_reloc_numbers_flag = 0;
-static int omit_sym_numbers_flag = 0;
-#ifndef OBJ_COFF
-#else
-int hflag;
-int nflag;
-int rflag;
-int tflag;
-#endif /* OBJ_BOUT */
-#else
-static int section_headers_flag = 0;
-static int section_contents_flag = 0;
-#endif /* OBJ_COFF */
-
-/* Size of a page.  Required by N_DATADDR in a.out.gnu.h [VAX].  */
-int page_size;
-
-#ifndef OBJ_COFF
-#ifndef OBJ_BOUT
-int main (argc, argv)
-#else
-int main(argc, argv)
-#endif /* OBJ_COFF */
-int argc;
-#ifndef OBJ_COFF
-#else
-main (argc, argv)
-#endif /* OBJ_BOUT */
-#endif /* OBJ_COFF */
-char **argv;
-{
-       int c;
-#ifndef OBJ_COFF
-#ifndef OBJ_BOUT
-#endif /* OBJ_COFF */
-/*     extern char *optarg; */
-#ifndef OBJ_COFF
-#else
-       extern char *optarg;
-#endif /* OBJ_BOUT */
-#endif /* OBJ_COFF */
-       extern int optind;
-       int seenflag = 0;
-       int ind = 0;
-#ifndef OBJ_COFF
-#ifndef OBJ_BOUT
-#endif /* OBJ_COFF */
-       static struct option long_options[] = {
-#ifdef OBJ_COFF
-               {"line-numbers",   0, &lflag, 1},
-               {"section-contents",   0, &section_contents_flag, 1},
-               {"section-headers",   0, &section_headers_flag, 1},
-#endif /* OBJ_COFF */
-               {"symbols",   0, &tflag, 1},
-               {"reloc",  0, &rflag, 1},
-               {"nstuff", 0, &nflag, 1},
-               {"header", 0, &hflag, 1},
-               {"data", 0, &Dflag, 1},
-               {"text", 0, &Tflag, 1},
-               {"omit-relocation-numbers", 0, &omit_reloc_numbers_flag, 1},
-               {"omit-symbol-numbers", 0, &omit_sym_numbers_flag, 1},
-               {"all", 0, &aflag, 1},
-               {NULL, 0, NULL, 0},
-       };
-#ifndef OBJ_COFF
-#else
-       static struct option long_options[] = 
-         {
-           {"symbols",   0, &tflag, 1},
-           {"reloc",  0, &rflag, 1},
-           {"nstuff", 0, &nflag, 1},
-           {"header", 0, &hflag, 1},
-           {NULL, 0, NULL, 0}
-         };
-#endif /* OBJ_BOUT */
-#endif /* OBJ_COFF */
-
-#ifndef OBJ_COFF
-       page_size = getpagesize ();
-
-#endif /* OBJ_COFF */
-       program_name = argv[0];
-                                
-#ifndef OBJ_COFF
-#ifndef OBJ_BOUT
-       while ((c = getopt_long (argc, argv, "ahnrt", long_options, &ind)) != EOF) {
-#else
-       while ((c = getopt_long (argc, argv, "hnrt", long_options, &ind))
-                     != EOF) {
-#endif /* OBJ_BOUT */
-#else
-       while ((c = getopt_long (argc, argv, "ahlonrt", long_options, &ind)) != EOF) {
-#endif /* OBJ_COFF */
-               seenflag = 1;
-#ifndef OBJ_COFF
-#ifndef OBJ_BOUT
-#endif /* OBJ_COFF */
-
-#ifndef OBJ_COFF
-#endif /* OBJ_BOUT */
-#endif /* OBJ_COFF */
-               switch (c) {
-               case  0 : break; /* we've been given a long option */
-#ifndef OBJ_COFF
-#ifndef OBJ_BOUT
-#endif /* OBJ_COFF */
-               case 'a': aflag = 1; break;
-               case 'h': hflag = 1; break;
-#ifdef OBJ_COFF
-               case 'o': hflag = 1; break;
-               case 'l': lflag = 1; break;
-#endif /* OBJ_COFF */
-               case 'n': nflag = 1; break;
-               case 'r': rflag = 1; break;
-#ifndef OBJ_COFF
-#endif /* OBJ_BOUT */
-#endif /* OBJ_COFF */
-               case 't': tflag = 1; break;
-#ifndef OBJ_COFF
-#ifdef OBJ_BOUT
-               case 'r': rflag = 1; break;
-               case 'n': nflag = 1; break;
-               case 'h': hflag = 1; break;
-#endif /* OBJ_BOUT */
-#endif /* OBJ_COFF */
-               default:
-                       usage ();
-#ifndef OBJ_COFF
-#ifndef OBJ_BOUT
-#endif /* OBJ_COFF */
-               } /* switch on option */
-       } /* while there are options */
-#ifndef OBJ_COFF
-#else
-               }
-       }
-#endif /* OBJ_BOUT */
-#endif /* OBJ_COFF */
-
-       if (seenflag == 0 || optind == argc)
-               usage ();
-
-#ifndef OBJ_COFF
-#ifndef OBJ_BOUT
-#endif /* OBJ_COFF */
-       if (aflag) {
-               hflag = 1;
-#ifdef OBJ_COFF
-               lflag = 1;
-#endif /* OBJ_COFF */
-               nflag = 1;
-               rflag = 1;
-               tflag = 1;
-               Dflag = 1;
-               Tflag = 1;
-#ifdef OBJ_COFF
-               section_headers_flag = 1;
-               section_contents_flag = 1;
-#endif /* OBJ_COFF */
-       } /* if all */
-
-#ifndef OBJ_COFF
-#endif /* OBJ_BOUT */
-#endif /* OBJ_COFF */
-       while (optind < argc)
-#ifndef OBJ_COFF
-               doit (argv[optind++]);
-#ifndef OBJ_BOUT
-#else
-               doit(argv[optind++]);
-#endif /* OBJ_COFF */
-
-       return(0);
-} /* main() */
-#ifndef OBJ_COFF
-#else
-}
-#endif /* OBJ_BOUT */
-#endif /* OBJ_COFF */
-
-#ifndef OBJ_COFF
-#ifndef OBJ_BOUT
-static void doit (name)
-#else
-doit (name)
-#endif /* OBJ_BOUT */
-#else
-static void doit(name)
-#endif /* OBJ_COFF */
-char *name;
-{
-       FILE *f;
-#ifndef OBJ_COFF
-       struct exec exec;
-#ifndef OBJ_BOUT
-#else
-       fileheader exec;
-
-       if (section_headers) {
-               free(section_headers);
-               section_headers = NULL;
-       } /* free section headers */
-
-       if (symbols) {
-               free(symbols);
-               symbols = NULL;
-       } /* free symbols */
-
-#endif /* OBJ_COFF */
-       printf("%s:\n", name);
-#ifndef OBJ_COFF
-#else
-       printf ("%s:\n", name);
-#endif /* OBJ_BOUT */
-#endif /* OBJ_COFF */
-       f = fopen (name, "r");
-       if (f == NULL) {
-#ifndef OBJ_COFF
-#ifndef OBJ_BOUT
-#endif /* OBJ_COFF */
-               fprintf(stderr, "%s: can not open ", program_name);
-#ifndef OBJ_COFF
-#else
-               fprintf (stderr, "%s: can not open ", program_name);
-#endif /* OBJ_BOUT */
-#endif /* OBJ_COFF */
-               perror (name);
-               return;
-       }
-#ifdef HEADER_SEEK
-       HEADER_SEEK (f);
-#endif
-#ifndef OBJ_COFF
-#ifndef OBJ_BOUT
-       if (fread((char *)&exec, sizeof exec, 1, f) != 1) {
-#else
-       if (fread((char *)&exec, sizeof(exec), 1, f) != 1) {
-#endif /* OBJ_COFF */
-               fprintf(stderr, "%s: can not read header for %s\n",
-#ifndef OBJ_COFF
-#else
-       if (fread ((char *)&exec, sizeof exec, 1, f) != 1) {
-               fprintf (stderr, "%s: can not read header for %s\n",
-#endif /* OBJ_BOUT */
-#endif /* OBJ_COFF */
-                        program_name, name);
-               return;
-       }
-
-#ifdef OBJ_COFF
-#ifdef I960ROMAGIC
-#define N_BADMAG I960BADMAG
-#endif /* I960ROMAGIC */
-
-#endif /* OBJ_COFF */
-       if (N_BADMAG (exec)) {
-#ifndef OBJ_COFF
-#ifndef OBJ_BOUT
-#endif /* OBJ_COFF */
-               fprintf(stderr, "%s: %s is not a%s object file\n",
-                        program_name, name,
-#ifdef B_OUT
-                        " b.out"
-#else
-                        "n a.out"
-#endif /* B_OUT */
-                        );
-#ifndef OBJ_COFF
-#else
-               fprintf (stderr, "%s: %s is not an object file\n",
-                        program_name, name);
-#endif /* OBJ_BOUT */
-#endif /* OBJ_COFF */
-               return;
-       }
-
-#ifndef OBJ_COFF
-#ifndef OBJ_BOUT
-#endif /* OBJ_COFF */
-       if (hflag) dump_header(&exec, f);
-#ifdef OBJ_COFF
-       if (lflag) dump_lnno(&exec, f);
-#endif /* OBJ_COFF */
-       if (nflag) dump_nstuff(&exec);
-#ifdef OBJ_COFF
-       if (section_headers_flag) dump_section_headers(&exec, f);
-       if (section_contents_flag) dump_section_contents(&exec, f);
-       if (sflag) dump_section_contents(&exec, f);
-#endif /* OBJ_COFF */
-       if (Tflag) dump_text(&exec, f);
-       if (Dflag) dump_data(&exec, f);
-       if (tflag) dump_sym(&exec, f);
-       if (rflag) dump_reloc(&exec, f);
-#ifndef OBJ_COFF
-#else
-       if (hflag)
-               dump_header (&exec);
-#endif /* OBJ_COFF */
-
-#ifndef OBJ_COFF
-       if (nflag)
-               dump_nstuff (&exec);
-#endif /* OBJ_BOUT */
-#else
-       printf("\n");
-       fclose(f);
-       return;
-} /* doit() */
-#endif /* OBJ_COFF */
-
-#ifndef OBJ_COFF
-#ifndef OBJ_BOUT
-       free_symbols();
-#else
-       if (tflag)
-               dump_sym (&exec, f);
-#endif /* OBJ_BOUT */
-#else
-static void dump_lnno(execp, f)
-fileheader *execp;
-FILE *f;
-{
-       int i = execp->f_nscns;
-       struct scnhdr *section;
-       char *buffer;
-       int bufsiz = 0;
-
-       if (i) {
-               printf("Line numbers:\n");
-               read_section_headers(execp, f);
-               read_symbols(execp, f);
-
-               for (section = section_headers; i; ++section, --i) {
-                       int size = section->s_nlnno * LINESZ;
-                       LINENO *r;
-
-                       if (size > bufsiz) {
-                               if (bufsiz) {
-                                       buffer = xrealloc(buffer, bufsiz = size);
-                               } else {
-                                       buffer = xmalloc(bufsiz = size);
-                               } /* if we had allocated anything before */
-                       } /* if bigger than our old buffer */
-                       
-                       printf("%8.8s:", section->s_name);
-                       fseek(f, section->s_lnnoptr, 0);
-
-                       if (size) {
-                               int j;
-
-                               if (fread(buffer, size, 1, f) != 1) {
-                                       printf(" (error reading lnno)\n");
-                                       continue;
-                               } /* on read error */
-
-                               printf("\n");
-                               
-                               for (r = (LINENO *) buffer, j = 0; j < section->s_nlnno; ++j, ++r) {
-                                       printf("lnno = %d,", r->l_lnno);
-
-                                       if (r->l_lnno) {
-                                               printf(" paddr = 0x%lx", (unsigned long) r->l_addr.l_paddr);
-                                       } else {
-                                               printf(" symndx = %ld, \"%s\"",
-                                                      r->l_addr.l_symndx,
-                                                      sym_pname(symbols + r->l_addr.l_symndx));
-                                       } /* if not symbol'd */
-
-                                       if (r->padding[0] || r->padding[1]) {
-                                               printf(" (padding = %2x %2x)",
-                                                      (unsigned) r->padding[0],
-                                                      (unsigned) r->padding[1]);
-                                       } /* if padding not zero'd */
-#endif /* OBJ_COFF */
-
-#ifndef OBJ_COFF
-#ifndef OBJ_BOUT
-#else
-                                       printf("\n");
-                               } /* for each lnno record */
-                       } else {
-                               printf(" (section has no line numbers.)\n");
-                       } /* if there really is something in the section */
-               } /* for each section */
-       } else {
-               printf("No Sections.\n");
-       } /* if there are sections */
-
-       free(buffer);
-       printf("\n");
-#endif /* OBJ_COFF */
-       return;
-#ifndef OBJ_COFF
-} /* doit() */
-#else
-       if (rflag)
-               dump_reloc (&exec, f);
-#endif /* OBJ_BOUT */
-#else
-} /* dump_lnno() */
-#endif /* OBJ_COFF */
-
-#ifndef OBJ_COFF
-#ifndef OBJ_BOUT
-static void dump_header(execp, f)
-#else
-       free_symbols ();
-#else
-static void dump_reloc(execp, f)
-fileheader *execp;
-FILE *f;
-{
-       int i = execp->f_nscns;
-       struct scnhdr *section;
-       char *buffer;
-       int bufsiz = 0;
-
-       if (i) {
-               read_section_headers(execp, f);
-
-               printf("Relocations:\n");
-               for (section = section_headers; i; ++section, --i) {
-                       int size = section->s_nreloc * RELSZ;
-                       RELOC *r;
-
-                       if (size > bufsiz) {
-                               if (bufsiz) {
-                                       buffer = xrealloc(buffer, bufsiz = size);
-                               } else {
-                                       buffer = xmalloc(bufsiz = size);
-                               } /* if we had allocated anything before */
-                       } /* if bigger than our old buffer */
-                       
-                       printf("%8.8s:", section->s_name);
-                       fseek(f, section->s_relptr, 0);
-
-                       if (size) {
-                               int j;
-
-                               if (fread(buffer, size, 1, f) != 1) {
-                                       printf(" (error reading reloc)\n");
-                                       continue;
-                               } /* on read error */
-
-                               printf("\n");
-                               
-                               for (r = (RELOC *) buffer, j = 0; j < section->s_nreloc; ++j, ++r) {
-                                       printf("vaddr = 0x%lx, symndx = %ld, r_type = ",
-                                              (unsigned long) r->r_vaddr,
-                                              r->r_symndx);
-
-                                       switch (r->r_type) {
-                                       case R_RELLONG:         printf(" RELLONG"); break;
-                                       case R_IPRSHORT:        printf("IPRSHORT"); break;
-                                       case R_IPRMED:          printf("  IPRMED"); break;
-                                       case R_IPRLONG:         printf(" IPRLONG"); break;
-                                       case R_OPTCALL:         printf(" OPTCALL"); break;
-                                       case R_OPTCALLX:        printf("OPTCALLX"); break;
-                                       case R_GETSEG:          printf("  GETSEG"); break;
-                                       case R_GETPA:           printf("   GETPA"); break;
-                                       case R_TAGWORD:         printf(" TAGWORD"); break;
-                                       default: printf("unrecognized"); break;
-                                       } /* switch on reloc type */
-
-                                       printf(".");
-
-                                       if (r->pad[0] || r->pad[1]) {
-                                               printf(" (padding = %2x %2x)",
-                                                      (unsigned) r->pad[0],
-                                                      (unsigned) r->pad[1]);
-                                       } /* if padding isn't zero */
-
-                                       printf("\n");
-                               } /* for each reloc record */
-                       } else {
-                               printf(" (section has no relocations.)\n");
-                       } /* if there really is something in the section */
-               } /* for each section */
-       } else {
-               printf("No Sections.\n");
-       } /* if there are sections */
-
-       /* free(buffer); */
-       printf("\n");
-       return;
-} /* dump_reloc() */
-
-static void dump_section_contents(execp, f)
-fileheader *execp;
-FILE *f;
-{
-       int i = execp->f_nscns;
-       struct scnhdr *section;
-       char *buffer;
-       int bufsiz = 0;
-
-       if (i) {
-               read_section_headers(execp, f);
-               printf("Section Contents:\n");
-
-               for (section = section_headers; i; ++section, --i) {
-                       if (section->s_size > bufsiz) {
-                               if (bufsiz) {
-                                       buffer = xrealloc(buffer, bufsiz = section->s_size);
-                               } else {
-                                       buffer = xmalloc(bufsiz = section->s_size);
-                               } /* if we had allocated anything before */
-                       } /* if bigger than our old buffer */
-                       
-                       printf("%8.8s:", section->s_name);
-                       
-                       if (section->s_flags & STYP_BSS) {
-                               printf(" bss sections have no contents.\n");
-                       } else {
-                               fseek(f, section->s_scnptr, 0);
-                               
-                               if (section->s_size) {
-                                       if (fread(buffer, section->s_size, 1, f) != 1) {
-                                               printf(" (error reading section contents)\n");
-                                       } /* on read error */
-                                       
-                                       printf("\n");
-                                       hex_dump(buffer, section->s_size);
-                                       printf("\n");
-                               } else {
-                                       printf(" (section has a size of zero.)\n");
-                               } /* if there really is a section */
-                       } /* if bss else dump */
-               } /* for each section */
-       } else {
-               printf("No Sections.\n");
-       } /* if there are sections */
-
-       free(buffer);
-       printf("\n");
-       return;
-} /* dump_section_contents() */
-
-static void dump_section_headers(execp, f)
-fileheader *execp;
-FILE *f;
-{
-       int i = execp->f_nscns;
-       struct scnhdr *section;
-
-       if (i > 0) {
-               read_section_headers(execp, f);
-               printf("Section Headers:\n");
-
-               for (section = section_headers; i; ++section, --i) {
-                       long flags = section->s_flags;
-
-                       printf("\"%8.8s\"", section->s_name);
-                       
-                       printf(" physical address: 0x%x vma: 0x%x size: 0x%x (%ld)",
-                              (unsigned) section->s_paddr,
-                              (unsigned) section->s_vaddr,
-                              (unsigned) section->s_size,
-                              section->s_size);
-                       
-                       printf(" relocs: %d linenos: %d alignment: 0x%lx (%ld)",
-                              section->s_nreloc,
-                              section->s_nlnno,
-                              section->s_align,
-                              (long) section->s_align);
-                       
-                       printf(" flags: 0x%x = ", (unsigned) section->s_flags);
-                       
-                       if (flags & STYP_REG) {
-                               printf(" REG");
-                               flags &= ~STYP_REG;
-                       } /* STYP_REG */
-                       
-                       if (flags & STYP_DSECT) {
-                               printf(" DSECT");
-                               flags &= ~STYP_DSECT;
-                       } /* STYP_DSECT */
-                       
-                       if (flags & STYP_NOLOAD) {
-                               printf(" NOLOAD");
-                               flags &= ~STYP_NOLOAD;
-                       } /* STYP_NOLOAD */
-                       
-                       if (flags & STYP_GROUP) {
-                               printf(" GROUP");
-                               flags &= ~STYP_GROUP;
-                       } /* STYP_GROUP */
-                       
-                       if (flags & STYP_PAD) {
-                               printf(" PAD");
-                               flags &= ~STYP_PAD;
-                       } /* STYP_PAD */
-                       
-                       if (flags & STYP_COPY) {
-                               printf(" COPY");
-                               flags &= ~STYP_COPY;
-                       } /* STYP_COPY */
-                       
-                       if (flags & STYP_TEXT) {
-                               printf(" TEXT");
-                               flags &= ~STYP_TEXT;
-                       } /* STYP_TEXT */
-                       
-                       if (flags & S_SHRSEG) {
-                               printf(" SHRSEG");
-                               flags &= ~S_SHRSEG;
-                       } /* S_SHRSEG */
-                       
-                       if (flags & STYP_DATA) {
-                               printf(" DATA");
-                               flags &= ~STYP_DATA;
-                       } /* STYP_DATA */
-                       
-                       if (flags & STYP_BSS) {
-                               printf(" BSS");
-                               flags &= ~STYP_BSS;
-                       } /* STYP_BSS */
-                       
-                       if (flags & S_NEWFCN) {
-                               printf(" NEWFCN");
-                               flags &= ~S_NEWFCN;
-                       } /* S_NEWFCN */
-                       
-                       if (flags & STYP_INFO) {
-                               printf(" INFO");
-                               flags &= ~STYP_INFO;
-                       } /* STYP_INFO */
-                       
-                       if (flags & STYP_OVER) {
-                               printf(" OVER");
-                               flags &= ~STYP_OVER;
-                       } /* STYP_OVER */
-                       
-                       if (flags & STYP_LIB) {
-                               printf(" LIB");
-                               flags &= ~STYP_LIB;
-                       } /* STYP_LIB */
-                       
-                       if (flags & STYP_MERGE) {
-                               printf(" MERGE");
-                               flags &= ~STYP_MERGE;
-                       } /* STYP_MERGE */
-                       
-                       if (flags & STYP_REVERSE_PAD) {
-                               printf(" REVERSE_PAD");
-                               flags &= ~STYP_REVERSE_PAD;
-                       } /* STYP_REVERSE_PAD */
-                       
-                       if (flags) {
-                               printf(" +unknown");
-                       } /* foo */
-                       
-                       printf("\n");
-               } /* for each section header */
-       } else {
-               printf("No section headers.\n");
-       } /* if there are any sections */
-#endif /* OBJ_COFF */
-
-#ifndef OBJ_COFF
-}
-#else
-       printf("\n");
-       return;
-} /* dump_section_headers() */
-#endif /* OBJ_COFF */
-
-#ifndef OBJ_COFF
-dump_header (execp)
-#endif /* OBJ_BOUT */
-struct exec *execp;
-#ifndef OBJ_BOUT
-#else
-static void dump_header(execp, f)
-fileheader *execp;
-#endif /* OBJ_COFF */
-FILE *f;
-#ifndef OBJ_COFF
-#endif /* OBJ_BOUT */
-#endif /* OBJ_COFF */
-{
-#ifdef OBJ_COFF
-#ifdef COFF
-       printf("magic: 0x%x (%o) ", (unsigned) execp->f_magic, (unsigned) execp->f_magic);
-       printf("number of sections: %d number of syms: %ld ", execp->f_nscns, execp->f_nsyms);
-       printf("time stamp: %s", ctime(&(execp->f_timdat)));
-       printf("flags:");
-
-       if (execp->f_flags & F_RELFLG) {
-               printf(" RELFLG");
-       } /* relflg */
-
-       if (execp->f_flags & F_EXEC) {
-               printf(" EXEC");
-       } /* exec */
-
-       if (execp->f_flags & F_LNNO) {
-               printf(" LNNO");
-       } /* lnno */
-
-       if (execp->f_flags & F_LSYMS) {
-               printf(" LSYMS");
-       } /* lsyms */
-
-       if (execp->f_flags & F_AR32WR) {
-               printf(" AR32WR");
-       } /* ar32wr */
-
-       assert(F_I960KB == F_I960SB);
-       assert(F_I960KA == F_I960SA);
-
-       switch (execp->f_flags & F_I960TYPE) {
-       case F_I960CORE:        printf(" I960CORE"); break;
-       case F_I960KB:          printf(" I960KB (== I960SB)"); break;
-       case F_I960MC:          printf(" I960MC"); break;
-       case F_I960XA:          printf(" I960XA"); break;
-       case F_I960CA:          printf(" I960CA"); break;
-       case F_I960KA:          printf(" I960KA (== I960SA)"); break;
-       default:                printf(" I960Unknown"); break;
-       } /* switch on i960 type */
-
-       if (execp->f_flags & ~(F_RELFLG | F_EXEC | F_LNNO | F_LSYMS | F_AR32WR | F_I960TYPE)) {
-               printf(" +unrecognized");
-       } /* unrecognized */
-
-       printf("\n\n");
-
-       if (execp->f_opthdr) {
-               if (execp->f_opthdr == sizeof(AOUTHDR)) {
-                       AOUTHDR hdr;
-                       
-                       fseek(f, sizeof(*execp), 0);
-                       if (fread(&hdr, sizeof(AOUTHDR), 1, f) == 1) {
-                               printf("aouthdr:\n");
-                               printf("magic: 0x%x (%o)", (unsigned) hdr.magic, (unsigned) hdr.magic);
-                               printf(" vstamp: 0x%ld\n", (long) hdr.vstamp);
-
-                               printf("sizes: text 0x%lx (%ld), data 0x%lx (%ld), bss 0x%lx (%ld)\n",
-                                      hdr.tsize,
-                                      (long) hdr.tsize,
-                                      hdr.dsize,
-                                      (long) hdr.dsize,
-                                      hdr.bsize,
-                                      (long) hdr.bsize);
-                               
-                               printf("entry point: 0x%lx, starts: text 0x%lx (%ld), data 0x%lx (%ld)\n",
-                                      hdr.entry,
-                                      hdr.text_start,
-                                      (long) hdr.text_start,
-                                      hdr.data_start,
-                                      (long) hdr.data_start);
-                               
-                               printf("tag entries: %ld\n",
-                                      (long) hdr.tagentries);
-                       } else {
-                               fprintf(stderr, "%s: error reading optional header", program_name);
-                               perror(NULL);
-                       } /* on error */
-                       
-               } else {
-                       printf("opthder != sizeof aouthdr?");
-               } /* size mismatch */
-
-       } else {
-               printf("No optional header.");
-       } /* print optional header */
-               
-               
-#else /* COFF */
-#endif /* OBJ_COFF */
-       int x;
-
-#if defined (__GNU_EXEC_MACROS__) && !defined (__STRUCT_EXEC_OVERRIDE__)
-#ifndef OBJ_COFF
-#ifndef OBJ_BOUT
-#endif /* OBJ_COFF */
-       printf("magic: 0x%x (%o)", N_MAGIC(*execp), N_MAGIC(*execp));
-       printf("machine type: %d", N_MACHTYPE(*execp));
-       printf("flags: 0x%x", N_FLAGS(*execp));
-#ifndef OBJ_COFF
-#else
-       printf ("magic: 0x%x (%o)", N_MAGIC(*execp), N_MAGIC(*execp));
-       printf ("machine type: %d", N_MACHTYPE(*execp));
-       printf ("flags: 0x%x", N_FLAGS(*execp));
-#endif /* OBJ_BOUT */
-#endif /* OBJ_COFF */
-#else /* non-gnu struct exec.  */
-#ifndef OBJ_COFF
-#ifndef OBJ_BOUT
-#endif /* OBJ_COFF */
-       printf("magic: 0x%x (%o) ", (unsigned) execp->a_magic, (unsigned) execp->a_magic);
-#ifndef OBJ_COFF
-#else
-       printf ("magic: 0x%x (%o) ", execp->a_magic, execp->a_magic);
-#endif /* OBJ_BOUT */
-#endif /* OBJ_COFF */
-#endif /* non-gnu struct exec.  */
-#ifndef OBJ_COFF
-#ifndef OBJ_BOUT
-#endif /* OBJ_COFF */
-       printf("text 0x%x ", (unsigned) execp->a_text);
-       printf("data 0x%x ", (unsigned) execp->a_data);
-       printf("bss 0x%x\n", (unsigned) execp->a_bss);
-       printf("nsyms %ld",  (long) (execp->a_syms / sizeof(struct nlist)));
-       x = execp->a_syms % sizeof(struct nlist);
-#ifndef OBJ_COFF
-#else
-       printf ("text 0x%x ", execp->a_text);
-       printf ("data 0x%x ", execp->a_data);
-       printf ("bss 0x%x\n", execp->a_bss);
-       printf ("nsyms %d", execp->a_syms / sizeof (struct nlist));
-       x = execp->a_syms % sizeof (struct nlist);
-#endif /* OBJ_BOUT */
-#endif /* OBJ_COFF */
-       if (x) 
-#ifndef OBJ_COFF
-#ifndef OBJ_BOUT
-#endif /* OBJ_COFF */
-               printf(" (+ %d bytes)", x);
-       printf(" entry 0x%lx ", execp->a_entry);
-
-#ifdef B_OUT
-       printf(" talign 0x%x", (unsigned) execp->a_talign);
-       printf(" dalign 0x%x", (unsigned) execp->a_dalign);
-       printf(" balign 0x%x", (unsigned) execp->a_balign);
-       printf(" unused 0x%x", (unsigned) execp->unused);
-#endif /* B_OUT */
-
-       printf(" trsize 0x%lx", execp->a_trsize);
-       printf(" drsize 0x%lx", execp->a_drsize);
-
-       if (N_TXTOFF(*execp) != 0 && N_TXTOFF(*execp) != sizeof(*execp)) {
-               char *buffer;
-               char *i;
-               int size = N_TXTOFF(*execp) - sizeof(*execp);
-               
-               buffer = xmalloc(size);
-               
-               fseek(f, sizeof(*execp), 0);
-               if (fread(buffer, size, 1, f) != 1) {
-                       fprintf(stderr, "%s: error reading between header and text", program_name);
-                       perror(NULL);
-               } /* on error */
-               
-               for (i = buffer; i < (buffer + size); ++i) {
-                       if (*i != '\0') {
-                               printf(" (garbage follows header)");
-                               break;
-                       } /* non null */
-               } /* walk the buffer looking for garbage */
-       } /* check for garbage following header */
-#ifdef OBJ_COFF
-#endif /* COFF */
-#endif /* OBJ_COFF */
-
-       printf("\n");
-       return;
-} /* dump_header() */
-
-#ifdef OBJ_COFF
-#ifdef comment
-#endif /* OBJ_COFF */
-static void dump_nstuff(execp)
-#ifndef OBJ_COFF
-struct exec *execp;
-#else
-fileheader *execp;
-#endif /* OBJ_COFF */
-{
-       printf("N_BADMAG %d\n", N_BADMAG(*execp));
-       printf("N_TXTOFF 0x%x\n", N_TXTOFF(*execp));
-       printf("N_SYMOFF 0x%lx\n", N_SYMOFF(*execp));
-       printf("N_STROFF 0x%lx\n", N_STROFF(*execp));
-       printf("N_TXTADDR 0x%x\n", (unsigned) N_TXTADDR(*execp));
-       printf("N_DATADDR 0x%lx\n", N_DATADDR(*execp));
-
-       return;
-} /* dump_nstuff() */
-#ifndef OBJ_COFF
-#else
-               printf (" (+ %d bytes)", x);
-       printf (" entry 0x%x ", execp->a_entry);
-#endif /* OBJ_BOUT */
-#endif /* OBJ_COFF */
-
-#ifndef OBJ_COFF
-#ifndef OBJ_BOUT
-#endif /* OBJ_COFF */
-static void dump_text(execp, f)
-#ifndef OBJ_COFF
-struct exec *execp;
-#else
-fileheader *execp;
-#endif /* OBJ_COFF */
-FILE *f;
-{
-       void *buffer;
-
-       if (execp->a_text) {
-               buffer = xmalloc(execp->a_text);
-               fseek(f, N_TXTOFF(*execp), 0);
-
-               if (fread(buffer, execp->a_text, 1, f) != 1) {
-                       fprintf(stderr, "%s: error reading text section.\n", program_name);
-                       return;
-               } /* on error */
-#ifndef OBJ_COFF
-#else
-       printf (" talign 0x%x ", execp->a_talign);
-       printf (" dalign 0x%x ", execp->a_dalign);
-       printf (" balign 0x%x ", execp->a_balign);
-       printf (" unused 0x%x ", execp->unused);
-#endif /* OBJ_BOUT */
-#endif /* OBJ_COFF */
-
-#ifndef OBJ_COFF
-#ifndef OBJ_BOUT
-#endif /* OBJ_COFF */
-               hex_dump(buffer, execp->a_text);
-               free(buffer);
-       } else {
-               printf("No text section.\n");
-       } /* if there is text */
-
-       return;
-} /* dump_text() */
-#ifndef OBJ_COFF
-#else
-       printf ("trsize 0x%x ", execp->a_trsize);
-       printf ("drsize 0x%x\n", execp->a_drsize);
-}
-#endif /* OBJ_BOUT */
-#endif /* OBJ_COFF */
-
-#ifndef OBJ_COFF
-#ifndef OBJ_BOUT
-#endif /* OBJ_COFF */
-static void dump_data(execp, f)
-#ifndef OBJ_COFF
-#else
-dump_nstuff (execp)
-#endif /* OBJ_BOUT */
-struct exec *execp;
-#ifndef OBJ_BOUT
-#else
-fileheader *execp;
-#endif /* OBJ_COFF */
-FILE *f;
-{
-       void *buffer;
-
-       if (execp->a_data) {
-               buffer = xmalloc(execp->a_data);
-               fseek(f, N_TXTOFF(*execp), 0);
-
-               if (fread(buffer, execp->a_data, 1, f) != 1) {
-                       fprintf(stderr, "%s: error reading data section.\n", program_name);
-                       return;
-               } /* on error */
-
-               hex_dump(buffer, execp->a_data);
-               free(buffer);
-       } else {
-               printf("No data section.\n");
-       } /* if there is data */
-
-       return;
-} /* dump_data() */
-#ifdef OBJ_COFF
-#endif /* comment */
-#endif /* OBJ_COFF */
-
-static void hex_dump(buffer, size)
-void *buffer;
-int size;
-#ifndef OBJ_COFF
-#endif /* OBJ_BOUT */
-#endif /* OBJ_COFF */
-{
-#ifndef OBJ_COFF
-#ifndef OBJ_BOUT
-#endif /* OBJ_COFF */
-       FILE *f;
-
-#ifndef OBJ_COFF
-       if ((f = popen("od -x +0x0", "w")) != NULL) {
-#else
-       fflush(stdout);
-
-       if ((f = popen("hexl", "w")) != NULL) {
-#endif /* OBJ_COFF */
-               if (fwrite(buffer, size, 1, f) != 1) {
-                       (void) fprintf(stderr, "%s: error writing to od(1) pipe:", program_name);
-                       perror(NULL);
-               } /* on error */
-       } else {
-               (void) fprintf(stderr, "%s: error opening pipe to od(1):", program_name);
-               perror(NULL);
-       } /* on successful popen */
-
-       (void) pclose(f);
-#ifdef OBJ_COFF
-       fflush(stdout);
-#endif /* OBJ_COFF */
-       return;
-} /* hex_dump() */
-#ifndef OBJ_COFF
-#else
-       printf ("N_BADMAG %d\n", N_BADMAG (*execp));
-       printf ("N_TXTOFF 0x%x\n", N_TXTOFF (*execp));
-       printf ("N_SYMOFF 0x%x\n", N_SYMOFF (*execp));
-       printf ("N_STROFF 0x%x\n", N_STROFF (*execp));
-       printf ("N_TXTADDR 0x%x\n", N_TXTADDR (*execp));
-       printf ("N_DATADDR 0x%x\n", N_DATADDR (*execp));
-}
-#endif /* OBJ_BOUT */
-#else
-
-char *sym_class_pname(class)
-char class;
-{
-       switch (class) {
-       case C_EFCN:    return("EFCN");
-       case C_NULL:    return("NULL");
-       case C_AUTO:    return("AUTO");
-       case C_EXT:     return("EXT");
-       case C_STAT:    return("STAT");
-       case C_REG:     return("REG");
-       case C_EXTDEF:  return("EXTDEF");
-       case C_LABEL:   return("LABEL");
-       case C_ULABEL:  return("ULABEL");
-       case C_MOS:     return("MOS");
-       case C_ARG:     return("ARG");
-       case C_STRTAG:  return("STRTAG");
-       case C_MOU:     return("MOU");
-       case C_UNTAG:   return("UNTAG");
-       case C_TPDEF:   return("TPDEF");
-       case C_USTATIC: return("USTATIC");
-       case C_ENTAG:   return("ENTAG");
-       case C_MOE:     return("MOE");
-       case C_REGPARM: return("REGPARM");
-       case C_FIELD:   return("FIELD");
-       case C_BLOCK:   return("BLOCK");
-       case C_FCN:     return("FCN");
-       case C_EOS:     return("EOS");
-       case C_FILE:    return("FILE");
-       case C_LINE:    return("LINE");
-       case C_ALIAS:   return("ALIAS");
-       case C_HIDDEN:  return("HIDDEN");
-               
-       case C_SCALL:   return("SCALL");
-       case C_LEAFEXT: return("LEAFEXT");
-       case C_OPTVAR:  return("OPTVAR");
-       case C_DEFINE:  return("DEFINE");
-       case C_PRAGMA:  return("PRAGMA");
-       case C_SEGMENT: return("SEGMENT");
-       case C_LEAFSTAT:return("LEAFSTAT");
-       case C_AUTOARG: return("AUTOARG");
-               
-       default:        return("(???)");
-       } /* switch on class */
-} /* sym_class_pname() */
-
-char *sym_type_pname(type)
-unsigned long type;
-{
-       switch (type) {
-       case T_NULL:    return("NULL");
-       case T_VOID:    return("VOID");
-       case T_CHAR:    return("CHAR");
-       case T_SHORT:   return("SHORT");
-       case T_INT:     return("INT");
-       case T_LONG:    return("LONG");
-       case T_FLOAT:   return("FLOAT");
-       case T_DOUBLE:  return("DOUBLE");
-       case T_STRUCT:  return("STRUCT");
-       case T_UNION:   return("UNION");
-       case T_ENUM:    return("ENUM");
-       case T_MOE:     return("MOE");
-       case T_UCHAR:   return("UCHAR");
-       case T_USHORT:  return("USHORT");
-       case T_UINT:    return("UINT");
-       case T_ULONG:   return("ULONG");
-       case T_LNGDBL:  return("LNGDBL");
-
-       default:        return("(???)");
-       } /* switch on type */
-} /* sym_type_pname() */
-
-char *sym_section_pname(scnum, execp)
-short scnum;
-fileheader *execp;
-{
-       switch (scnum) {
-       case N_UNDEF: return("UNDEF");
-       case N_ABS: return("ABS");
-       case N_DEBUG: return("DEBUG");
-       case N_TV: return("NTV");
-       case P_TV: return("PTV");
-               
-       default:
-               assert(0 <= (scnum-1));
-               assert((scnum-1) < execp->f_nscns);
-               return(section_headers[scnum-1].s_name);
-       } /* switch on scnum */
-} /* sym_section_pname() */
-
-static char *sym_pname(s)
-SYMENT *s;
-{
-       static char buffer[SYMNMLEN + 1];
-       if (s->n_zeroes) {
-               bzero(buffer, SYMNMLEN + 1);
-               bcopy(s->n_name, buffer, SYMNMLEN);
-               return(buffer);
-       } else {
-               return((char *) s->n_offset);
-       } /* if "short" name */
-} /* sym_pname() */
-
-/*
- * Notes:  .file must be first, .text, .data, .bss must be last.
- */
-
-static void dump_aux_fcn(aux)
-AUXENT *aux;
-{
-       /* function symbol */
-       printf(" tagndx %ld,", aux->x_sym.x_tagndx);
-       printf(" size %ld,", aux->x_sym.x_misc.x_fsize);
-       printf(" lnnoptr 0x%lx,", (unsigned long) aux->x_sym.x_fcnary.x_fcn.x_lnnoptr);
-       printf(" endndx %ld", aux->x_sym.x_fcnary.x_fcn.x_endndx);
-       printf(" tvndx 0x%x,", (unsigned) aux->x_sym.x_tvndx);
-       return;
-} /* dump_aux_fcn() */
-
-static void dump_aux_tagmember(aux)
-AUXENT *aux;
-{
-       printf(" tagndx %ld,", aux->x_sym.x_tagndx);
-       printf(" size %d,", aux->x_sym.x_misc.x_lnsz.x_size);
-       return;
-} /* dump_aux_tagmember() */
-
-static void dump_aux_array(aux)
-AUXENT *aux;
-{
-       int i;
-#endif /* OBJ_COFF */
-
-#ifndef OBJ_COFF
-#ifndef OBJ_BOUT
-#else
-       printf(" size %d, ", aux->x_sym.x_misc.x_lnsz.x_size);
-
-       for (i = 0; i < 4; ++i) {
-               printf("[%d]", aux->x_sym.x_fcnary.x_ary.x_dimen[i]);
-       } /* four dimensions */
-
-       return;
-} /* dump_aux_array() */
-
-#endif /* OBJ_COFF */
-static void dump_sym(execp, f)
-#ifndef OBJ_COFF
-#else
-dump_sym (execp, f)
-#endif /* OBJ_BOUT */
-struct exec *execp;
-#else
-fileheader *execp;
-#endif /* OBJ_COFF */
-FILE *f;
-{
-       int i;
-#ifndef OBJ_COFF
-       struct nlist *sp;
-#else
-       SYMENT *sp;
-#endif /* OBJ_COFF */
-
-#ifndef OBJ_COFF
-#ifndef OBJ_BOUT
-       read_symbols(execp, f);
-#else
-       read_symbols (execp, f);
-#endif /* OBJ_BOUT */
-       if (nsyms == 0) {
-#ifndef OBJ_BOUT
-#else
-       read_section_headers(execp, f);
-
-       if (execp->f_nsyms == 0) {
-#endif /* OBJ_COFF */
-               printf("no symbols\n");
-#ifndef OBJ_COFF
-#else
-               printf ("no symbols\n");
-#endif /* OBJ_BOUT */
-#endif /* OBJ_COFF */
-               return;
-#ifndef OBJ_COFF
-       }
-#else
-       } /* if there are any */
-
-       read_symbols(execp, f);
-       printf("Symbols:\n");
-#endif /* OBJ_COFF */
-
-#ifndef OBJ_COFF
-#ifndef OBJ_BOUT
-#endif /* OBJ_COFF */
-       if (!omit_sym_numbers_flag) {
-#ifndef OBJ_COFF
-               printf("%3s: ", "#");
-#else
-               printf("%3s:", "#");
-#endif /* OBJ_COFF */
-       } /* printing symbol numbers */
-
-#ifndef OBJ_COFF
-       printf("%4s %5s %4s %8s\n",
-               "type", "other", "desc", "val");
-#else
-       printf(" %*.*s %8.8s %3.3s %8.8s %7.7s %3.3s %s\n",
-              SYMNMLEN, SYMNMLEN, "name",
-              "value", "num", "sec-name", "class", "aux", "type");
-#endif /* OBJ_COFF */
-
-#ifndef OBJ_COFF
-#else
-       printf ("%3s: %4s %5s %4s %8s\n",
-               "#", "type", "other", "desc", "val");
-#endif /* OBJ_BOUT */
-       for (i = 0, sp = symtbl; i < nsyms; i++, sp++) {
-#ifndef OBJ_BOUT
-#else
-       for (i = 0, sp = symbols; sp < symbols + execp->f_nsyms; ++sp, ++i) {
-#endif /* OBJ_COFF */
-               if (!omit_sym_numbers_flag) {
-#ifndef OBJ_COFF
-                       printf("%3d: ", i);
-#else
-                       printf("%3d:", i);
-#endif /* OBJ_COFF */
-               } /* printing symbol numbers */
-               
-#ifndef OBJ_COFF
-               printf("%4x %5x %4x %8lx %s",
-                       (unsigned) (sp->n_type & 0xff),
-                       (unsigned) (sp->n_other & 0xff),
-                       (unsigned) (sp->n_desc & 0xffff),
-#else
-               printf ("%3d: %4x %5x %4x %8x %s",
-                       i,
-                       sp->n_type & 0xff,
-                       sp->n_other & 0xff,
-                       sp->n_desc & 0xffff,
-#endif /* OBJ_BOUT */
-                       sp->n_value,
-                       sp->n_un.n_name);
-#ifndef OBJ_BOUT
-#else
-               printf(" %*.*s", SYMNMLEN, SYMNMLEN, (sp->n_zeroes) ? sp->n_name : "");
-#endif /* OBJ_COFF */
-               
-#ifndef OBJ_COFF
-#else
-
-#endif /* OBJ_BOUT */
-               if (sp->n_type & N_EXT) printf(" N_EXT");
-               if (sp->n_type & N_STAB) printf(" N_STAB");
-#ifndef OBJ_BOUT
-#else
-               printf(" %8lx", (unsigned long) sp->n_value);
-               printf(" %3d", sp->n_scnum);
-               printf(" %8.8s", sym_section_pname(sp->n_scnum, execp));
-               printf(" %7.7s", sym_class_pname(sp->n_sclass));
-               printf(" %1d", sp->n_numaux);
-#endif /* OBJ_COFF */
-               
-#ifndef OBJ_COFF
-#else
-
-#endif /* OBJ_BOUT */
-               if ((sp->n_type & N_TYPE) == N_UNDF) {
-                       printf(" N_UNDF");
-               } else {
-                       if (sp->n_type & N_ABS) printf(" N_ABS");
-                       if (sp->n_type & N_TEXT) printf(" N_TEXT");
-                       if (sp->n_type & N_DATA) printf(" N_DATA");
-                       if (sp->n_type & N_BSS) printf(" N_BSS");
-                       if (sp->n_type & N_FN) printf(" N_FN");
-               } /* if not undefined */
-#ifndef OBJ_BOUT
-#else
-               printf(" %s", sym_type_pname(BTYPE(sp->n_type)));
-#endif /* OBJ_COFF */
-               
-#ifndef OBJ_COFF
-#ifdef B_OUT
-#else
-
-#endif /* OBJ_BOUT */
-               if (sp->n_other) {
-                       printf(" [");
-#ifndef OBJ_BOUT
-#else
-               /* derived type */
-               printf("%s", (ISPTR(sp->n_type)
-                                ? "(PTR)"
-                                : (ISFCN(sp->n_type)
-                                   ? "(FCN)"
-                                   : (ISARY(sp->n_type)
-                                      ? "(ARY)"
-                                      : ""))));
-               
-               if (sp->n_type & ~(N_BTMASK | N_TMASK)) {
-                       printf("+");
-               } /* if type isn't all */
-               
-               if (!sp->n_zeroes) {
-                       printf(" \"%s\"", sym_pname(sp));
-               } /* if "long" name */
-               
-               /* FIXME do something with the flags field */
-#ifdef comment
-               if (sp->pad1[0] != 0 || sp->pad1[1] != 0) {
-                       printf(" (pad1 %2.2x%2.2x)", (unsigned) sp->pad1[0], (unsigned) sp->pad1[1]);
-               } /* if padding not zeroed */
-#endif /* comment */
-               
-               if (sp->pad2[0] != 0 || sp->pad2[1] != 0) {
-                       printf(" (pad2 %2.2x%2.2x)", (unsigned) sp->pad2[0], (unsigned) sp->pad2[1]);
-               } /* if padding not zeroed */
-               
-#define DTYPE(x) (((x) & N_TMASK) >> N_BTSHFT)
-               
-               if (sp->n_numaux > 0) {
-                       int auxcountshouldbe = 1;
-                       AUXENT *aux = (AUXENT *) (sp + 1);
-                       AUXENT *aux2 = (AUXENT *) (sp + 2);
-#endif /* OBJ_COFF */
-                       
-#ifndef OBJ_COFF
-#else
-#else
-                       switch (sp->n_sclass) {
-                               
-                       case C_FILE: /* file symbol */
-                               printf(" filename \"%s\"", aux->x_file.x_fname);
-                               break;
-                               
-                       case C_UNTAG:
-                       case C_ENTAG:
-                       case C_STRTAG: {
-                               if (DTYPE(sp->n_type) == DT_NON
-                                   && (BTYPE(sp->n_type) == T_NULL
-                                       || BTYPE(sp->n_type) == T_STRUCT
-                                       || BTYPE(sp->n_type) == T_UNION
-                                       || BTYPE(sp->n_type) == T_ENUM)) {
-                                       printf(" size %d,", aux->x_sym.x_misc.x_lnsz.x_size);
-                                       printf(" endndx %ld", aux->x_sym.x_fcnary.x_fcn.x_endndx);
-                               } else {
-                                       printf(" (don't know why this tag has an auxent)");
-                                       abort();
-                               } /* if I understand */
-                               
-                               break;
-                       } /* tags */
-                               
-                       case C_EOS: {
-                               if (BTYPE(sp->n_type) == DT_NON && BTYPE(sp->n_type) == T_NULL) {
-                                       printf(" tagndx %ld,", aux->x_sym.x_tagndx);
-                                       printf(" size %d,", aux->x_sym.x_misc.x_lnsz.x_size);
-                               } else {
-                                       printf(" (don't know why this eos has an auxent)");
-                                       abort();
-                               } /* if I understand */
-                               break;
-                       } /* eos */
-                               
-                       case C_FCN:
-                       case C_BLOCK: {
-                               if (BTYPE(sp->n_type) == DT_NON && BTYPE(sp->n_type) == T_NULL) {
-                                       if (!strcmp(sp->n_name, ".bb") || !strcmp(sp->n_name, ".bf")) {
-                                               printf(" lnno %d", aux->x_sym.x_misc.x_lnsz.x_lnno);
-                                               printf(" endndx %ld", aux->x_sym.x_fcnary.x_fcn.x_endndx);
-                                               break;
-                                               
-                                       } else if (!strcmp(sp->n_name, ".eb") || !strcmp(sp->n_name, ".ef")) {
-                                               printf(" lnno %d", aux->x_sym.x_misc.x_lnsz.x_lnno);
-                                               break;
-                                               
-                                       } /* beginning or ending */
-                               } /* if I understand */
-                               
-                               printf(" (don't know why this fcn or block has an auxent)");
-                               abort();
-                               break;
-                       } /* begin/end blocks */
-                               
-                       case C_LEAFEXT:
-                       case C_LEAFSTAT:
-                       case C_SCALL:
-                       case C_EXT: {
-                               assert(BTYPE(sp->n_type) != T_MOE);
-
-                               if (ISFCN(sp->n_type)
-                                   || BTYPE(sp->n_type) == T_NULL) {
-                                       dump_aux_fcn(aux);
-                                       
-                                       if (sp->n_sclass == C_SCALL) {
-                                               printf(" stindx %ld", aux2->x_sc.x_stindx);
-                                               auxcountshouldbe = 2;
-                                       } else if (sp->n_sclass == C_LEAFEXT
-                                                  || sp->n_sclass == C_LEAFSTAT) {
-                                               printf(" balentry 0x%lx", aux2->x_bal.x_balntry);
-                                               auxcountshouldbe = 2;
-                                       } /* special functions */
-                               } else if (ISARY(sp->n_type)) {
-                                       dump_aux_array(aux);
-                               } else if (BTYPE(sp->n_type) == T_STRUCT) {
-                                       printf(" tagndx %ld,", aux->x_sym.x_tagndx);
-                                       printf(" size %d,", aux->x_sym.x_misc.x_lnsz.x_size);
-                               } else {
-                                       assert(0);
-                               } /* on type */
-                               
-                               break;
-                       } /* function */
-                               
-                       case C_STAT: {
-                               switch (DTYPE(sp->n_type)) {
-                               case DT_NON:
-                                       switch (BTYPE(sp->n_type)) {
-                                       case T_NULL: /* section symbol */
-                                               printf(" length 0x%lx, relocs %d, lnnos %d",
-                                                      (unsigned long) aux->x_scn.x_scnlen,
-                                                      aux->x_scn.x_nreloc,
-                                                      aux->x_scn.x_nlinno);
-                                               break;
-                                       case T_STRUCT:
-                                       case T_UNION:
-                                       case T_ENUM:
-                                               dump_aux_tagmember(aux);
-                                               break;
-                                       default:
-                                               printf(" (confused).");
-                                               abort();
-                                       } /* switch on btype */
-                                       break;
-                                       
-                               case DT_FCN: /* function */
-                                       if (BTYPE(sp->n_type) == T_MOE) {
-                                               printf(" (confused).");
-                                               abort();
-                                       } else {
-                                               dump_aux_fcn(aux);
-                                       } /* if I understand */
-                                       break;
-                                       
-                               case DT_ARY:
-                                       assert(BTYPE(sp->n_type) != T_MOE);
-                                       dump_aux_array(aux);
-                                       /* intentional fall through */
-                               case DT_PTR:
-                                       assert(BTYPE(sp->n_type) == T_STRUCT
-                                              || BTYPE(sp->n_type) == T_UNION
-                                              || BTYPE(sp->n_type) == T_ENUM);
-                                       dump_aux_tagmember(aux);
-                                       break;
-                                       
-                               default:
-                                       printf(" (confused.)");
-                                       abort();
-                               } /* switch on derived type */
-                               
-                               break;
-                       } /* STAT */
-                               
-                       case C_AUTO:
-                       case C_MOS:
-                       case C_MOU:
-                       case C_TPDEF:
-                               if (DTYPE(sp->n_type) == DT_ARY) {
-                                       assert(BTYPE(sp->n_type) != T_MOE);
-                                       dump_aux_array(aux);
-                               } else {
-                                       dump_aux_tagmember(aux);
-                               } /* if an array */
-                               break;
-#endif /* OBJ_COFF */
-
-#ifndef OBJ_COFF
-#endif /* OBJ_BOUT */
-                       if (sp->n_other == N_CALLNAME) {
-                               printf(" N_CALLNAME");
-                       } else if (sp->n_other == N_BALNAME) {
-                               printf(" N_BALNAME");
-                       } else if (1 <= sp->n_other && sp->n_other <= 32) {
-                               printf(" \"trap\"");
-                       } else {
-                               printf(" !!!invalid \"other\" field");
-                       } /* what is it */
-#ifndef OBJ_BOUT
-#else
-                       case C_FIELD:
-                               printf(" tagndx %ld,", aux->x_sym.x_tagndx);
-                               printf(" size %d,", aux->x_sym.x_misc.x_lnsz.x_size);
-                               break;
-                               
-                       default:
-                               printf(" (don't know why this symbol has aux entries.)");
-                               abort();
-                               break;
-                       } /* switch on class */
-#endif /* OBJ_COFF */
-                       
-#ifndef OBJ_COFF
-#else
-
-#endif /* OBJ_BOUT */
-                       printf(" ]");
-               } /* is defined */
-#ifndef OBJ_BOUT
-#endif /* B_OUT */
-#else
-                       if (sp->n_numaux != auxcountshouldbe) {
-                               printf(" (expecting %d auxents here)", auxcountshouldbe);
-                               abort();
-                       } /* on miscount */
-               } /* do aux entries */
-               
-               i += sp->n_numaux;
-               sp += sp->n_numaux;
-#endif /* OBJ_COFF */
-               
-               printf("\n");
-       } /* for each symbol */
-#ifndef OBJ_COFF
-#endif /* OBJ_BOUT */
-#endif /* OBJ_COFF */
-
-#ifndef OBJ_COFF
-#ifndef OBJ_BOUT
-#else
-       printf("\n");
-#endif /* OBJ_COFF */
-       return;
-} /* dump_sym() */
-#ifndef OBJ_COFF
-#else
-               printf("\n");
-       }
-}
-#endif /* OBJ_BOUT */
-#endif /* OBJ_COFF */
-
-#ifndef OBJ_COFF
-#ifndef OBJ_BOUT
-#else
-#ifdef comment
-#endif /* OBJ_COFF */
-static void dump_reloc (execp, f)
-#ifndef OBJ_COFF
-#else
-dump_reloc (execp, f)
-#endif /* OBJ_BOUT */
-struct exec *execp;
-#else
-fileheader *execp;
-#endif /* OBJ_COFF */
-FILE *f;
-{
-#ifndef OBJ_COFF
-       read_symbols (execp, f);
-#else
-       read_symbols(execp, f);
-#endif /* OBJ_COFF */
-       if (execp->a_trsize) {
-#ifndef OBJ_COFF
-#ifndef OBJ_BOUT
-#endif /* OBJ_COFF */
-               printf("text reloc\n");
-#ifndef OBJ_COFF
-#else
-               printf ("text reloc\n");
-#endif /* OBJ_BOUT */
-#endif /* OBJ_COFF */
-               dump_reloc1 (execp, f, N_TRELOFF (*execp), execp->a_trsize);
-       }
-       if (execp->a_drsize) {
-#ifndef OBJ_COFF
-#ifndef OBJ_BOUT
-#endif /* OBJ_COFF */
-               printf("data reloc\n");
-#ifndef OBJ_COFF
-#else
-               printf ("data reloc\n");
-#endif /* OBJ_BOUT */
-#endif /* OBJ_COFF */
-               dump_reloc1 (execp, f, N_DRELOFF (*execp), execp->a_drsize);
-       }
-#ifndef OBJ_COFF
-#ifndef OBJ_BOUT
-#endif /* OBJ_COFF */
-
-       return;
-} /* dump_reloc() */
-#ifndef OBJ_COFF
-#else
-}
-#endif /* OBJ_BOUT */
-#endif /* OBJ_COFF */
-
-#ifndef OBJ_COFF
-#ifndef OBJ_BOUT
-#endif /* OBJ_COFF */
-static void dump_reloc1 (execp, f, off, size)
-#ifndef OBJ_COFF
-#else
-dump_reloc1 (execp, f, off, size)
-#endif /* OBJ_BOUT */
-struct exec *execp;
-#else
-fileheader *execp;
-#endif /* OBJ_COFF */
-FILE *f;
-#ifndef OBJ_COFF
-#ifndef OBJ_BOUT
-#endif /* OBJ_COFF */
-int off;
-int size;
-#ifndef OBJ_COFF
-#endif /* OBJ_BOUT */
-#endif /* OBJ_COFF */
-{
-       int nreloc;
-       struct relocation_info reloc;
-       int i;
-
-       nreloc = size / sizeof (struct relocation_info);
-
-#ifndef OBJ_COFF
-#ifndef OBJ_BOUT
-#endif /* OBJ_COFF */
-       if (!omit_reloc_numbers_flag) {
-               printf("%3s: ", "#");
-       } /* if printing numbers */
-
-#ifndef sparc
-       printf("%3s ", "len");
-#endif /* sparc */
-
-       printf("%8s %4s\n", "adr", "sym");
-
-
-       fseek(f, off, 0);
-#ifndef OBJ_COFF
-#else
-       printf ("%3s: %3s %8s %4s\n", "#", "len", "adr", "sym");
-       fseek (f, off, 0);
-#endif /* OBJ_BOUT */
-#endif /* OBJ_COFF */
-       for (i = 0; i < nreloc; i++) {
-#ifndef OBJ_COFF
-#ifndef OBJ_BOUT
-#endif /* OBJ_COFF */
-               if (fread((char *)&reloc, sizeof reloc, 1, f) != 1) {
-                       fprintf(stderr, "%s: error reading reloc\n",
-#ifndef OBJ_COFF
-#else
-               if (fread ((char *)&reloc, sizeof reloc, 1, f) != 1) {
-                       fprintf (stderr, "%s: error reading reloc\n",
-#endif /* OBJ_BOUT */
-#endif /* OBJ_COFF */
-                                program_name);
-                       return;
-               }
-#ifndef OBJ_COFF
-#ifndef OBJ_BOUT
-#endif /* OBJ_COFF */
-
-               if (!omit_reloc_numbers_flag) {
-                       printf("%3d: ", i);
-               } /* if printing numbers */
-
-#ifndef sparc          
-               printf("%3d ", 1 << reloc.r_length);
-#endif /* sparc */
-
-               printf("%8lx ", (long unsigned) reloc.r_address);
-
-#ifndef B_OUT
-#ifndef OBJ_COFF
-#else
-               printf ("%3d: %3d %8x ", i, 1 << reloc.r_length,
-                       reloc.r_address);
-               
-#ifdef NOT
-#endif /* OBJ_BOUT */
-#endif /* OBJ_COFF */
-               if (reloc.r_extern) {
-#ifndef OBJ_COFF
-#ifndef OBJ_BOUT
-#endif /* OBJ_COFF */
-                       if (!omit_sym_numbers_flag) {
-                               (void) printf("%4d ", reloc.r_symbolnum);
-                       } else {
-                               (void) printf("     ");
-                       } /* if printing sym numbers */
-
-#ifndef OBJ_COFF
-#else
-                       printf ("%4d ", reloc.r_symbolnum);
-#endif /* OBJ_BOUT */
-#endif /* OBJ_COFF */
-                       if (reloc.r_symbolnum < nsyms)
-#ifndef OBJ_COFF
-#ifndef OBJ_BOUT
-#endif /* OBJ_COFF */
-                               printf("%s ", symtbl[reloc.r_symbolnum].n_un.n_name);
-#ifndef OBJ_COFF
-#else
-                               printf ("%s ",
-                                       symtbl[reloc.r_symbolnum].n_un.n_name);
-#endif /* OBJ_BOUT */
-#endif /* OBJ_COFF */
-               } else {
-#ifndef OBJ_COFF
-#ifndef OBJ_BOUT
-#endif /* OBJ_COFF */
-                       printf("     ");
-#ifndef OBJ_COFF
-#else
-                       printf ("     ");
-#endif /* OBJ_BOUT */
-#endif /* OBJ_COFF */
-                       switch (reloc.r_symbolnum & ~N_EXT) {
-#ifndef OBJ_COFF
-#ifndef OBJ_BOUT
-#endif /* OBJ_COFF */
-                       case N_TEXT: printf(".text "); break;
-                       case N_DATA: printf(".data "); break;
-                       case N_BSS: printf(".bss "); break;
-                       case N_ABS: printf(".abs "); break;
-                       default: printf("base %x ", (unsigned) reloc.r_symbolnum); break;
-#ifndef OBJ_COFF
-#else
-                       case N_TEXT: printf (".text "); break;
-                       case N_DATA: printf (".data "); break;
-                       case N_BSS: printf (".bss "); break;
-                       case N_ABS: printf (".abs "); break;
-                       default: printf ("base %x ", reloc.r_symbolnum); break;
-#endif /* OBJ_BOUT */
-#endif /* OBJ_COFF */
-                       }
-               }
-#ifndef OBJ_COFF
-#ifndef OBJ_BOUT
-#endif /* OBJ_COFF */
-#endif /* not B_OUT */
-
-#ifdef SPARC
-               if (reloc.r_addend) printf("+0x%x ", (unsigned) reloc.r_addend);
-
-               switch (reloc.r_type) {
-               case RELOC_8: printf("R8 "); break;
-               case RELOC_16: printf("R16 "); break;
-               case RELOC_32: printf("R32 "); break;
-               case RELOC_DISP8: printf("DISP8 "); break;
-               case RELOC_DISP16: printf("DISP16 "); break;
-               case RELOC_DISP32: printf("DISP32 "); break;
-               case RELOC_WDISP30: printf("WDISP30 "); break;
-               case RELOC_WDISP22: printf("WDISP22 "); break;
-               case RELOC_HI22: printf("HI22 "); break;
-               case RELOC_22: printf("R22 "); break;
-               case RELOC_13: printf("R13 "); break;
-               case RELOC_LO10: printf("LO10 "); break;
-               case RELOC_SFA_BASE: printf("SFA_BASE "); break;
-               case RELOC_SFA_OFF13: printf("SFA_OFF13 "); break;
-               case RELOC_BASE10: printf("BASE10 "); break;
-               case RELOC_BASE13: printf("BASE13 "); break;
-               case RELOC_BASE22: printf("BASE22 "); break;
-               case RELOC_PC10: printf("PC10 "); break;
-               case RELOC_PC22: printf("PC22 "); break;
-               case RELOC_JMP_TBL: printf("JMP_TBL "); break;
-               case RELOC_SEGOFF16: printf("SEGOFF16 "); break;
-               case RELOC_GLOB_DAT: printf("GLOB_DAT "); break;
-               case RELOC_JMP_SLOT: printf("JMP_SLOT "); break;
-               case RELOC_RELATIVE: printf("RELATIVE "); break;
-               } /* switch on reloc type */
-#else /* SPARC */
-               if (reloc.r_pcrel) printf("PCREL ");
-#endif /* SPARC */
-
-#ifdef B_OUT
-               if (reloc.r_bsr) printf("BSR ");
-               if (reloc.r_disp) printf("DISP ");
-               if (reloc.r_callj) printf("CALLJ ");
-               if (reloc.nuthin) printf("NUTHIN ");
-#endif /* B_OUT */
-
-#ifdef SPARC
-               {
-                       struct reloc_info_sparc spare;
-
-                       bzero(&spare, sizeof(spare));
-
-                       reloc.r_address = 0;
-                       reloc.r_index = 0;
-                       reloc.r_extern = 0;
-                       reloc.r_type = 0;
-                       reloc.r_addend = 0;
-
-                       if (bcmp(&reloc, &spare, sizeof(spare))) {
-                               printf("(garbage in spare bits) ");
-                       } /* if garbage in spare bits */
-               } /* sparc */
-#endif /* SPARC */
-
-#ifndef OBJ_COFF
-#else
-#endif /* NOT */
-               if (reloc.r_pcrel) printf ("PCREL ");
-               if (reloc.r_bsr) printf ("BSR ");
-               if (reloc.r_disp) printf ("DISP ");
-               if (reloc.r_callj) printf ("CALLJ ");
-               if (reloc.nuthin) printf ("NUTHIN ");
-#endif /* OBJ_BOUT */
-#endif /* OBJ_COFF */
-#if 0
-#ifndef OBJ_COFF
-#ifndef OBJ_BOUT
-#endif /* OBJ_COFF */
-               if (reloc.r_pad) printf("PAD %x ", reloc.r_pad);
-#ifndef OBJ_COFF
-#else
-               if (reloc.r_pad) printf ("PAD %x ", reloc.r_pad);
-#endif /* OBJ_BOUT */
-#endif /* OBJ_COFF */
-#endif
-#ifndef OBJ_COFF
-#ifndef OBJ_BOUT
-#endif /* OBJ_COFF */
-               printf("\n");
-       } /* for each reloc record */
-
-       return;
-} /* dump_reloc1() */
-#ifndef OBJ_COFF
-#else
-               printf ("\n");
-       }
-}
-#endif /* OBJ_BOUT */
-#else
-#endif /* comment */
-#endif /* OBJ_COFF */
-
-/* Allocate `n' bytes of memory dynamically, with error checking.  */
-
-#ifndef OBJ_COFF
-char *
-xmalloc (n)
-     unsigned n;
-{
-  char *p;
-
-  p = malloc (n);
-  if (p == 0)
-    {
-#ifndef OBJ_BOUT
-      fprintf(stderr, "%s: virtual memory exhausted\n", program_name);
-#else
-      fprintf (stderr, "%s: virtual memory exhausted\n", program_name);
-#endif /* OBJ_BOUT */
-      exit (1);
-    }
-#ifndef OBJ_BOUT
-  bzero(p, n);
-#endif /* OBJ_BOUT */
-  return p;
-#ifndef OBJ_BOUT
-#else
-static char *xmalloc (n)
-unsigned n;
-{
-       char *p;
-       
-       p = malloc (n);
-       if (p == NULL)
-           {
-                   fprintf(stderr, "%s: virtual memory exhausted\n", program_name);
-                   exit (1);
-           }
-       bzero(p, n);
-       return p;
-#endif /* OBJ_COFF */
-} /* xmalloc() */
-
-#ifdef OBJ_COFF
-static char *xrealloc(p, size)
-char *p;
-unsigned size;
-{
-       p = realloc(p, size);
-
-       if (p == NULL) {
-               fprintf(stderr, "%s: virtual memory exhausted\n", program_name);
-               exit (1);
-       } /* on malloc failure */
-
-       bzero(p, size);
-       return(p);
-} /* xrealloc() */
-
-#endif /* OBJ_COFF */
-/*
- * Local Variables:
- * comment-column: 0
- * fill-column: 131
- * End:
- */
-
-/* end of objdump.c */
-#ifndef OBJ_COFF
-#else
-}
-#endif /* OBJ_BOUT */
-#endif /* OBJ_COFF */
diff --git a/gas/obstack.c b/gas/obstack.c
deleted file mode 100644 (file)
index 9837b1e..0000000
+++ /dev/null
@@ -1,380 +0,0 @@
-/* obstack.c - subroutines used implicitly by object stack macros
-   Copyright (C) 1988 Free Software Foundation, Inc.
-
-This program is free software; you can redistribute it and/or modify it
-under the terms of the GNU General Public License as published by the
-Free Software Foundation; either version 2, or (at your option) any
-later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-#include "obstack.h"
-
-#ifdef __STDC__
-#define POINTER void *
-#else
-#define POINTER char *
-#endif
-
-/* Determine default alignment.  */
-struct fooalign
-  {
-    char x;
-    double d;
-  };
-
-#define DEFAULT_ALIGNMENT ((char *)&((struct fooalign *) 0)->d - (char *)0)
-/* If malloc were really smart, it would round addresses to DEFAULT_ALIGNMENT.
-   But in fact it might be less smart and round addresses to as much as
-   DEFAULT_ROUNDING.  So we prepare for it to do that.  */
-union fooround
-  {
-    long x;
-    double d;
-  };
-
-#define DEFAULT_ROUNDING (sizeof (union fooround))
-
-/* When we copy a long block of data, this is the unit to do it with.
-   On some machines, copying successive ints does not work;
-   in such a case, redefine COPYING_UNIT to `long' (if that works)
-   or `char' as a last resort.  */
-#ifndef COPYING_UNIT
-#define COPYING_UNIT int
-#endif
-
-/* The non-GNU-C macros copy the obstack into this global variable
-   to avoid multiple evaluation.  */
-
-struct obstack *_obstack;
-\f
-/* Initialize an obstack H for use.  Specify chunk size SIZE (0 means default).
-   Objects start on multiples of ALIGNMENT (0 means use default).
-   CHUNKFUN is the function to use to allocate chunks,
-   and FREEFUN the function to free them.  */
-
-void
-_obstack_begin (h, size, alignment, chunkfun, freefun)
-     struct obstack *h;
-     int size;
-     int alignment;
-POINTER (*chunkfun) ();
-     void (*freefun) ();
-{
-  register struct _obstack_chunk *chunk;       /* points to new chunk */
-
-  if (alignment == 0)
-    alignment = DEFAULT_ALIGNMENT;
-  if (size == 0)
-    /* Default size is what GNU malloc can fit in a 4096-byte block.  */
-    {
-      /* 12 is sizeof (mhead) and 4 is EXTRA from GNU malloc.
-        Use the values for range checking, because if range checking is off,
-        the extra bytes won't be missed terribly, but if range checking is on
-        and we used a larger request, a whole extra 4096 bytes would be
-        allocated.
-
-        These number are irrelevant to the new GNU malloc.  I suspect it is
-        less sensitive to the size of the request.  */
-      int extra = ((((12 + DEFAULT_ROUNDING - 1) & ~(DEFAULT_ROUNDING - 1))
-                   + 4 + DEFAULT_ROUNDING - 1)
-                  & ~(DEFAULT_ROUNDING - 1));
-      size = 4096 - extra;
-    }
-
-  h->chunkfun = (struct _obstack_chunk * (*)()) chunkfun;
-  h->freefun = freefun;
-  h->chunk_size = size;
-  h->alignment_mask = alignment - 1;
-
-  chunk = h->chunk = (*h->chunkfun) (h->chunk_size);
-  h->next_free = h->object_base = chunk->contents;
-  h->chunk_limit = chunk->limit
-    = (char *) chunk + h->chunk_size;
-  chunk->prev = 0;
-  /* The initial chunk now contains no empty object.  */
-  h->maybe_empty_object = 0;
-}
-
-/* Allocate a new current chunk for the obstack *H
-   on the assumption that LENGTH bytes need to be added
-   to the current object, or a new object of length LENGTH allocated.
-   Copies any partial object from the end of the old chunk
-   to the beginning of the new one.  */
-
-void
-_obstack_newchunk (h, length)
-     struct obstack *h;
-     int length;
-{
-  register struct _obstack_chunk *old_chunk = h->chunk;
-  register struct _obstack_chunk *new_chunk;
-  register long new_size;
-  register int obj_size = h->next_free - h->object_base;
-  register int i;
-  int already;
-
-  /* Compute size for new chunk.  */
-  new_size = (obj_size + length) + (obj_size >> 3) + 100;
-  if (new_size < h->chunk_size)
-    new_size = h->chunk_size;
-
-  /* Allocate and initialize the new chunk.  */
-  new_chunk = h->chunk = (*h->chunkfun) (new_size);
-  new_chunk->prev = old_chunk;
-  new_chunk->limit = h->chunk_limit = (char *) new_chunk + new_size;
-
-  /* Move the existing object to the new chunk.
-     Word at a time is fast and is safe if the object
-     is sufficiently aligned.  */
-  if (h->alignment_mask + 1 >= DEFAULT_ALIGNMENT)
-    {
-      for (i = obj_size / sizeof (COPYING_UNIT) - 1;
-          i >= 0; i--)
-       ((COPYING_UNIT *) new_chunk->contents)[i]
-         = ((COPYING_UNIT *) h->object_base)[i];
-      /* We used to copy the odd few remaining bytes as one extra COPYING_UNIT,
-        but that can cross a page boundary on a machine
-        which does not do strict alignment for COPYING_UNITS.  */
-      already = obj_size / sizeof (COPYING_UNIT) * sizeof (COPYING_UNIT);
-    }
-  else
-    already = 0;
-  /* Copy remaining bytes one by one.  */
-  for (i = already; i < obj_size; i++)
-    new_chunk->contents[i] = h->object_base[i];
-
-  /* If the object just copied was the only data in OLD_CHUNK,
-     free that chunk and remove it from the chain.
-     But not if that chunk might contain an empty object.  */
-  if (h->object_base == old_chunk->contents && !h->maybe_empty_object)
-    {
-      new_chunk->prev = old_chunk->prev;
-      (*h->freefun) (old_chunk);
-    }
-
-  h->object_base = new_chunk->contents;
-  h->next_free = h->object_base + obj_size;
-  /* The new chunk certainly contains no empty object yet.  */
-  h->maybe_empty_object = 0;
-}
-
-/* Return nonzero if object OBJ has been allocated from obstack H.
-   This is here for debugging.
-   If you use it in a program, you are probably losing.  */
-
-int
-_obstack_allocated_p (h, obj)
-     struct obstack *h;
-     POINTER obj;
-{
-  register struct _obstack_chunk *lp;  /* below addr of any objects in this chunk */
-  register struct _obstack_chunk *plp; /* point to previous chunk if any */
-
-  lp = (h)->chunk;
-  /* We use >= rather than > since the object cannot be exactly at
-     the beginning of the chunk but might be an empty object exactly
-     at the end of an adjacent chunk. */
-  while (lp != 0 && ((POINTER) lp >= obj || (POINTER) (lp)->limit < obj))
-    {
-      plp = lp->prev;
-      lp = plp;
-    }
-  return lp != 0;
-}
-\f
-/* Free objects in obstack H, including OBJ and everything allocate
-   more recently than OBJ.  If OBJ is zero, free everything in H.  */
-
-#undef obstack_free
-
-/* This function has two names with identical definitions.
-   This is the first one, called from non-ANSI code.  */
-
-void
-_obstack_free (h, obj)
-     struct obstack *h;
-     POINTER obj;
-{
-  register struct _obstack_chunk *lp;  /* below addr of any objects in this chunk */
-  register struct _obstack_chunk *plp; /* point to previous chunk if any */
-
-  lp = h->chunk;
-  /* We use >= because there cannot be an object at the beginning of a chunk.
-     But there can be an empty object at that address
-     at the end of another chunk.  */
-  while (lp != 0 && ((POINTER) lp >= obj || (POINTER) (lp)->limit < obj))
-    {
-      plp = lp->prev;
-      (*h->freefun) (lp);
-      lp = plp;
-      /* If we switch chunks, we can't tell whether the new current
-        chunk contains an empty object, so assume that it may.  */
-      h->maybe_empty_object = 1;
-    }
-  if (lp)
-    {
-      h->object_base = h->next_free = (char *) (obj);
-      h->chunk_limit = lp->limit;
-      h->chunk = lp;
-    }
-  else if (obj != 0)
-    /* obj is not in any of the chunks! */
-    abort ();
-}
-
-/* This function is used from ANSI code.  */
-
-void
-obstack_free (h, obj)
-     struct obstack *h;
-     POINTER obj;
-{
-  register struct _obstack_chunk *lp;  /* below addr of any objects in this chunk */
-  register struct _obstack_chunk *plp; /* point to previous chunk if any */
-
-  lp = h->chunk;
-  /* We use >= because there cannot be an object at the beginning of a chunk.
-     But there can be an empty object at that address
-     at the end of another chunk.  */
-  while (lp != 0 && ((POINTER) lp >= obj || (POINTER) (lp)->limit < obj))
-    {
-      plp = lp->prev;
-      (*h->freefun) (lp);
-      lp = plp;
-      /* If we switch chunks, we can't tell whether the new current
-        chunk contains an empty object, so assume that it may.  */
-      h->maybe_empty_object = 1;
-    }
-  if (lp)
-    {
-      h->object_base = h->next_free = (char *) (obj);
-      h->chunk_limit = lp->limit;
-      h->chunk = lp;
-    }
-  else if (obj != 0)
-    /* obj is not in any of the chunks! */
-    abort ();
-}
-\f
-#if 0
-/* These are now turned off because the applications do not use it
-   and it uses bcopy via obstack_grow, which causes trouble on sysV.  */
-
-/* Now define the functional versions of the obstack macros.
-   Define them to simply use the corresponding macros to do the job.  */
-
-#ifdef __STDC__
-/* These function definitions do not work with non-ANSI preprocessors;
-   they won't pass through the macro names in parentheses.  */
-
-/* The function names appear in parentheses in order to prevent
-   the macro-definitions of the names from being expanded there.  */
-
-POINTER (obstack_base) (obstack)
-     struct obstack *obstack;
-{
-  return obstack_base (obstack);
-}
-
-POINTER (obstack_next_free) (obstack)
-     struct obstack *obstack;
-{
-  return obstack_next_free (obstack);
-}
-
-int (obstack_object_size) (obstack)
-     struct obstack *obstack;
-{
-  return obstack_object_size (obstack);
-}
-
-int (obstack_room) (obstack)
-     struct obstack *obstack;
-{
-  return obstack_room (obstack);
-}
-
-void (obstack_grow) (obstack, pointer, length)
-     struct obstack *obstack;
-     POINTER pointer;
-     int length;
-{
-  obstack_grow (obstack, pointer, length);
-}
-
-void (obstack_grow0) (obstack, pointer, length)
-     struct obstack *obstack;
-     POINTER pointer;
-     int length;
-{
-  obstack_grow0 (obstack, pointer, length);
-}
-
-void (obstack_1grow) (obstack, character)
-     struct obstack *obstack;
-     int character;
-{
-  obstack_1grow (obstack, character);
-}
-
-void (obstack_blank) (obstack, length)
-     struct obstack *obstack;
-     int length;
-{
-  obstack_blank (obstack, length);
-}
-
-void (obstack_1grow_fast) (obstack, character)
-     struct obstack *obstack;
-     int character;
-{
-  obstack_1grow_fast (obstack, character);
-}
-
-void (obstack_blank_fast) (obstack, length)
-     struct obstack *obstack;
-     int length;
-{
-  obstack_blank_fast (obstack, length);
-}
-
-POINTER (obstack_finish) (obstack)
-     struct obstack *obstack;
-{
-  return obstack_finish (obstack);
-}
-
-POINTER (obstack_alloc) (obstack, length)
-     struct obstack *obstack;
-     int length;
-{
-  return obstack_alloc (obstack, length);
-}
-
-POINTER (obstack_copy) (obstack, pointer, length)
-     struct obstack *obstack;
-     POINTER pointer;
-     int length;
-{
-  return obstack_copy (obstack, pointer, length);
-}
-
-POINTER (obstack_copy0) (obstack, pointer, length)
-     struct obstack *obstack;
-     POINTER pointer;
-     int length;
-{
-  return obstack_copy0 (obstack, pointer, length);
-}
-
-#endif /* __STDC__ */
-
-#endif /* 0 */
diff --git a/gas/obstack.h b/gas/obstack.h
deleted file mode 100644 (file)
index c6a8e0a..0000000
+++ /dev/null
@@ -1,444 +0,0 @@
-/* obstack.h - object stack macros
-   Copyright (C) 1988 Free Software Foundation, Inc.
-
-This program is free software; you can redistribute it and/or modify it
-under the terms of the GNU General Public License as published by the
-Free Software Foundation; either version 2, or (at your option) any
-later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-/* Summary:
-
-All the apparent functions defined here are macros. The idea
-is that you would use these pre-tested macros to solve a
-very specific set of problems, and they would run fast.
-Caution: no side-effects in arguments please!! They may be
-evaluated MANY times!!
-
-These macros operate a stack of objects.  Each object starts life
-small, and may grow to maturity.  (Consider building a word syllable
-by syllable.)  An object can move while it is growing.  Once it has
-been "finished" it never changes address again.  So the "top of the
-stack" is typically an immature growing object, while the rest of the
-stack is of mature, fixed size and fixed address objects.
-
-These routines grab large chunks of memory, using a function you
-supply, called `obstack_chunk_alloc'.  On occasion, they free chunks,
-by calling `obstack_chunk_free'.  You must define them and declare
-them before using any obstack macros.
-
-Each independent stack is represented by a `struct obstack'.
-Each of the obstack macros expects a pointer to such a structure
-as the first argument.
-
-One motivation for this package is the problem of growing char strings
-in symbol tables.  Unless you are "fascist pig with a read-only mind"
-[Gosper's immortal quote from HAKMEM item 154, out of context] you
-would not like to put any arbitrary upper limit on the length of your
-symbols.
-
-In practice this often means you will build many short symbols and a
-few long symbols.  At the time you are reading a symbol you don't know
-how long it is.  One traditional method is to read a symbol into a
-buffer, realloc()ating the buffer every time you try to read a symbol
-that is longer than the buffer.  This is beaut, but you still will
-want to copy the symbol from the buffer to a more permanent
-symbol-table entry say about half the time.
-
-With obstacks, you can work differently.  Use one obstack for all symbol
-names.  As you read a symbol, grow the name in the obstack gradually.
-When the name is complete, finalize it.  Then, if the symbol exists already,
-free the newly read name.
-
-The way we do this is to take a large chunk, allocating memory from
-low addresses.  When you want to build a symbol in the chunk you just
-add chars above the current "high water mark" in the chunk.  When you
-have finished adding chars, because you got to the end of the symbol,
-you know how long the chars are, and you can create a new object.
-Mostly the chars will not burst over the highest address of the chunk,
-because you would typically expect a chunk to be (say) 100 times as
-long as an average object.
-
-In case that isn't clear, when we have enough chars to make up
-the object, THEY ARE ALREADY CONTIGUOUS IN THE CHUNK (guaranteed)
-so we just point to it where it lies.  No moving of chars is
-needed and this is the second win: potentially long strings need
-never be explicitly shuffled. Once an object is formed, it does not
-change its address during its lifetime.
-
-When the chars burst over a chunk boundary, we allocate a larger
-chunk, and then copy the partly formed object from the end of the old
-chunk to the beginning of the new larger chunk.  We then carry on
-accreting characters to the end of the object as we normally would.
-
-A special macro is provided to add a single char at a time to a
-growing object.  This allows the use of register variables, which
-break the ordinary 'growth' macro.
-
-Summary:
-       We allocate large chunks.
-       We carve out one object at a time from the current chunk.
-       Once carved, an object never moves.
-       We are free to append data of any size to the currently
-         growing object.
-       Exactly one object is growing in an obstack at any one time.
-       You can run one obstack per control block.
-       You may have as many control blocks as you dare.
-       Because of the way we do it, you can `unwind' a obstack
-         back to a previous state. (You may remove objects much
-         as you would with a stack.)
-*/
-
-
-/* Don't do the contents of this file more than once.  */
-
-#ifndef __OBSTACKS__
-#define __OBSTACKS__
-\f
-/* We use subtraction of (char *)0 instead of casting to int
-   because on word-addressable machines a simple cast to int
-   may ignore the byte-within-word field of the pointer.  */
-
-#ifndef __PTR_TO_INT
-#define __PTR_TO_INT(P) ((P) - (char *)0)
-#endif
-
-#ifndef __INT_TO_PTR
-#define __INT_TO_PTR(P) ((P) + (char *)0)
-#endif
-
-struct _obstack_chunk          /* Lives at front of each chunk. */
-{
-  char *limit;                 /* 1 past end of this chunk */
-  struct _obstack_chunk *prev; /* address of prior chunk or NULL */
-  char contents[4];            /* objects begin here */
-};
-
-struct obstack                 /* control current object in current chunk */
-{
-  long chunk_size;             /* preferred size to allocate chunks in */
-  struct _obstack_chunk *chunk;        /* address of current struct obstack_chunk */
-  char *object_base;           /* address of object we are building */
-  char *next_free;             /* where to add next char to current object */
-  char *chunk_limit;           /* address of char after current chunk */
-  int temp;                    /* Temporary for some macros.  */
-  int alignment_mask;          /* Mask of alignment for each object. */
-  struct _obstack_chunk *(*chunkfun) ();       /* User's fcn to allocate a chunk.  */
-  void (*freefun) ();          /* User's function to free a chunk.  */
-  /* Nonzero means there is a possibility the current chunk contains
-     a zero-length object.  This prevents freeing the chunk
-     if we allocate a bigger chunk to replace it.  */
-  char maybe_empty_object;
-};
-
-/* Declare the external functions we use; they are in obstack.c.  */
-
-#ifdef __STDC__
-extern void _obstack_newchunk (struct obstack *, int);
-extern void _obstack_free (struct obstack *, void *);
-extern void _obstack_begin (struct obstack *, int, int,
-                           void *(*)(), void (*)());
-#else
-extern void _obstack_newchunk ();
-extern void _obstack_free ();
-extern void _obstack_begin ();
-#endif
-\f
-#ifdef __STDC__
-
-/* Do the function-declarations after the structs
-   but before defining the macros.  */
-
-void obstack_init (struct obstack *obstack);
-
-void *obstack_alloc (struct obstack *obstack, int size);
-
-void *obstack_copy (struct obstack *obstack, void *address, int size);
-void *obstack_copy0 (struct obstack *obstack, void *address, int size);
-
-void obstack_free (struct obstack *obstack, void *block);
-
-void obstack_blank (struct obstack *obstack, int size);
-
-void obstack_grow (struct obstack *obstack, void *data, int size);
-void obstack_grow0 (struct obstack *obstack, void *data, int size);
-
-void obstack_1grow (struct obstack *obstack, int data_char);
-void obstack_ptr_grow (struct obstack *obstack, void *data);
-void obstack_int_grow (struct obstack *obstack, int data);
-
-void *obstack_finish (struct obstack *obstack);
-
-int obstack_object_size (struct obstack *obstack);
-
-int obstack_room (struct obstack *obstack);
-void obstack_1grow_fast (struct obstack *obstack, int data_char);
-void obstack_ptr_grow_fast (struct obstack *obstack, void *data);
-void obstack_int_grow_fast (struct obstack *obstack, int data);
-void obstack_blank_fast (struct obstack *obstack, int size);
-
-void *obstack_base (struct obstack *obstack);
-void *obstack_next_free (struct obstack *obstack);
-int obstack_alignment_mask (struct obstack *obstack);
-int obstack_chunk_size (struct obstack *obstack);
-
-#endif /* __STDC__ */
-
-/* Non-ANSI C cannot really support alternative functions for these macros,
-   so we do not declare them.  */
-\f
-/* Pointer to beginning of object being allocated or to be allocated next.
-   Note that this might not be the final address of the object
-   because a new chunk might be needed to hold the final size.  */
-
-#define obstack_base(h) ((h)->object_base)
-
-/* Size for allocating ordinary chunks.  */
-
-#define obstack_chunk_size(h) ((h)->chunk_size)
-
-/* Pointer to next byte not yet allocated in current chunk.  */
-
-#define obstack_next_free(h)   ((h)->next_free)
-
-/* Mask specifying low bits that should be clear in address of an object.  */
-
-#define obstack_alignment_mask(h) ((h)->alignment_mask)
-
-#define obstack_init(h) \
-  _obstack_begin ((h), 0, 0, \
-                 (void *(*) ()) obstack_chunk_alloc, (void (*) ())obstack_chunk_free)
-
-#define obstack_begin(h, size) \
-  _obstack_begin ((h), (size), 0, \
-                 (void *(*) ()) obstack_chunk_alloc, (void (*) ())obstack_chunk_free)
-
-#define obstack_1grow_fast(h,achar) (*((h)->next_free)++ = achar)
-
-#define obstack_blank_fast(h,n) ((h)->next_free += (n))
-\f
-#if defined (__GNUC__) && defined (__STDC__)
-#if __GNUC__ < 2
-#define __extension__
-#endif
-
-/* For GNU C, if not -traditional,
-   we can define these macros to compute all args only once
-   without using a global variable.
-   Also, we can avoid using the `temp' slot, to make faster code.  */
-
-#define obstack_object_size(OBSTACK)                                   \
-  __extension__                                                                \
-  ({ struct obstack *__o = (OBSTACK);                                  \
-     (unsigned) (__o->next_free - __o->object_base); })
-
-#define obstack_room(OBSTACK)                                          \
-  __extension__                                                                \
-  ({ struct obstack *__o = (OBSTACK);                                  \
-     (unsigned) (__o->chunk_limit - __o->next_free); })
-
-/* Note that the call to _obstack_newchunk is enclosed in (..., 0)
-   so that we can avoid having void expressions
-   in the arms of the conditional expression.
-   Casting the third operand to void was tried before,
-   but some compilers won't accept it.  */
-#define obstack_grow(OBSTACK,where,length)                             \
-__extension__                                                          \
-({ struct obstack *__o = (OBSTACK);                                    \
-   int __len = (length);                                               \
-   ((__o->next_free + __len > __o->chunk_limit)                                \
-    ? (_obstack_newchunk (__o, __len), 0) : 0);                                \
-   memcpy (__o->next_free, where, __len);                              \
-   __o->next_free += __len;                                            \
-   (void) 0; })
-
-#define obstack_grow0(OBSTACK,where,length)                            \
-__extension__                                                          \
-({ struct obstack *__o = (OBSTACK);                                    \
-   int __len = (length);                                               \
-   ((__o->next_free + __len + 1 > __o->chunk_limit)                    \
-    ? (_obstack_newchunk (__o, __len + 1), 0) : 0),                    \
-   memcpy (__o->next_free, where, __len),                              \
-   __o->next_free += __len,                                            \
-   *(__o->next_free)++ = 0;                                            \
-   (void) 0; })
-
-#define obstack_1grow(OBSTACK,datum)                                   \
-__extension__                                                          \
-({ struct obstack *__o = (OBSTACK);                                    \
-   ((__o->next_free + 1 > __o->chunk_limit)                            \
-    ? (_obstack_newchunk (__o, 1), 0) : 0),                            \
-   *(__o->next_free)++ = (datum);                                      \
-   (void) 0; })
-
-/* These assume that the obstack alignment is good enough for pointers or ints,
-   and that the data added so far to the current object
-   shares that much alignment.  */
-
-#define obstack_ptr_grow(OBSTACK,datum)                                        \
-__extension__                                                          \
-({ struct obstack *__o = (OBSTACK);                                    \
-   ((__o->next_free + sizeof (void *) > __o->chunk_limit)              \
-    ? (_obstack_newchunk (__o, sizeof (void *)), 0) : 0),              \
-   *(*(void ***)&__o->next_free)++ = ((void *)datum);                  \
-   (void) 0; })
-
-#define obstack_int_grow(OBSTACK,datum)                                        \
-__extension__                                                          \
-({ struct obstack *__o = (OBSTACK);                                    \
-   ((__o->next_free + sizeof (int) > __o->chunk_limit)                 \
-    ? (_obstack_newchunk (__o, sizeof (int)), 0) : 0),                 \
-   *(*(int **)&__o->next_free)++ = ((int)datum);                       \
-   (void) 0; })
-
-#define obstack_ptr_grow_fast(h,aptr) (*(*(void ***)&(h)->next_free)++ = (void *)aptr)
-#define obstack_int_grow_fast(h,aint) (*(*(int **)&(h)->next_free)++ = (int)aint)
-
-#define obstack_blank(OBSTACK,length)                                  \
-__extension__                                                          \
-({ struct obstack *__o = (OBSTACK);                                    \
-   int __len = (length);                                               \
-   ((__o->chunk_limit - __o->next_free < __len)                                \
-    ? (_obstack_newchunk (__o, __len), 0) : 0);                                \
-   __o->next_free += __len;                                            \
-   (void) 0; })
-
-#define obstack_alloc(OBSTACK,length)                                  \
-__extension__                                                          \
-({ struct obstack *__h = (OBSTACK);                                    \
-   obstack_blank (__h, (length));                                      \
-   obstack_finish (__h); })
-
-#define obstack_copy(OBSTACK,where,length)                             \
-__extension__                                                          \
-({ struct obstack *__h = (OBSTACK);                                    \
-   obstack_grow (__h, (where), (length));                              \
-   obstack_finish (__h); })
-
-#define obstack_copy0(OBSTACK,where,length)                            \
-__extension__                                                          \
-({ struct obstack *__h = (OBSTACK);                                    \
-   obstack_grow0 (__h, (where), (length));                             \
-   obstack_finish (__h); })
-
-/* The local variable is named __o1 to avoid a name conflict
-   when obstack_blank is called.  */
-#define obstack_finish(OBSTACK)                                        \
-__extension__                                                          \
-({ struct obstack *__o1 = (OBSTACK);                                   \
-   void *value = (void *) __o1->object_base;                           \
-   if (__o1->next_free == value)                                       \
-     __o1->maybe_empty_object = 1;                                     \
-   __o1->next_free                                                     \
-     = __INT_TO_PTR ((__PTR_TO_INT (__o1->next_free)+__o1->alignment_mask)\
-                    & ~ (__o1->alignment_mask));                       \
-   ((__o1->next_free - (char *)__o1->chunk                             \
-     > __o1->chunk_limit - (char *)__o1->chunk)                                \
-    ? (__o1->next_free = __o1->chunk_limit) : 0);                      \
-   __o1->object_base = __o1->next_free;                                        \
-   value; })
-
-#define obstack_free(OBSTACK, OBJ)                                     \
-__extension__                                                          \
-({ struct obstack *__o = (OBSTACK);                                    \
-   void *__obj = (OBJ);                                                        \
-   if (__obj > (void *)__o->chunk && __obj < (void *)__o->chunk_limit)  \
-     __o->next_free = __o->object_base = __obj;                                \
-   else (obstack_free) (__o, __obj); })
-\f
-#else /* not __GNUC__ or not __STDC__ */
-
-#define obstack_object_size(h) \
- (unsigned) ((h)->next_free - (h)->object_base)
-
-#define obstack_room(h)                \
- (unsigned) ((h)->chunk_limit - (h)->next_free)
-
-#define obstack_grow(h,where,length)                                   \
-( (h)->temp = (length),                                                        \
-  (((h)->next_free + (h)->temp > (h)->chunk_limit)                     \
-   ? (_obstack_newchunk ((h), (h)->temp), 0) : 0),                     \
-  memcpy ((h)->next_free, where, (h)->temp),                           \
-  (h)->next_free += (h)->temp)
-
-#define obstack_grow0(h,where,length)                                  \
-( (h)->temp = (length),                                                        \
-  (((h)->next_free + (h)->temp + 1 > (h)->chunk_limit)                 \
-   ? (_obstack_newchunk ((h), (h)->temp + 1), 0) : 0),                 \
-  memcpy ((h)->next_free, where, (h)->temp),                           \
-  (h)->next_free += (h)->temp,                                         \
-  *((h)->next_free)++ = 0)
-
-#define obstack_1grow(h,datum)                                         \
-( (((h)->next_free + 1 > (h)->chunk_limit)                             \
-   ? (_obstack_newchunk ((h), 1), 0) : 0),                             \
-  *((h)->next_free)++ = (datum))
-
-#define obstack_ptr_grow(h,datum)                                      \
-( (((h)->next_free + sizeof (char *) > (h)->chunk_limit)               \
-   ? (_obstack_newchunk ((h), sizeof (char *)), 0) : 0),               \
-  *(*(char ***)&(h)->next_free)++ = ((char *)datum))
-
-#define obstack_int_grow(h,datum)                                      \
-( (((h)->next_free + sizeof (int) > (h)->chunk_limit)                  \
-   ? (_obstack_newchunk ((h), sizeof (int)), 0) : 0),                  \
-  *(*(int **)&(h)->next_free)++ = ((int)datum))
-
-#define obstack_ptr_grow_fast(h,aptr) (*(*(char ***)&(h)->next_free)++ = (char *)aptr)
-#define obstack_int_grow_fast(h,aint) (*(*(int **)&(h)->next_free)++ = (int)aint)
-#define obstack_blank(h,length)                                                \
-( (h)->temp = (length),                                                        \
-  (((h)->chunk_limit - (h)->next_free < (h)->temp)                     \
-   ? (_obstack_newchunk ((h), (h)->temp), 0) : 0),                     \
-  (h)->next_free += (h)->temp)
-
-#define obstack_alloc(h,length)                                                \
- (obstack_blank ((h), (length)), obstack_finish ((h)))
-
-#define obstack_copy(h,where,length)                                   \
- (obstack_grow ((h), (where), (length)), obstack_finish ((h)))
-
-#define obstack_copy0(h,where,length)                                  \
- (obstack_grow0 ((h), (where), (length)), obstack_finish ((h)))
-
-#define obstack_finish(h)                                              \
-( ((h)->next_free == (h)->object_base                                  \
-   ? (((h)->maybe_empty_object = 1), 0)                                        \
-   : 0),                                                               \
-  (h)->temp = __PTR_TO_INT ((h)->object_base),                         \
-  (h)->next_free                                                       \
-    = __INT_TO_PTR ((__PTR_TO_INT ((h)->next_free)+(h)->alignment_mask)        \
-                   & ~ ((h)->alignment_mask)),                         \
-  (((h)->next_free - (char *)(h)->chunk                                        \
-    > (h)->chunk_limit - (char *)(h)->chunk)                           \
-   ? ((h)->next_free = (h)->chunk_limit) : 0),                         \
-  (h)->object_base = (h)->next_free,                                   \
-  __INT_TO_PTR ((h)->temp))
-
-#ifdef __STDC__
-#define obstack_free(h,obj)                                            \
-( (h)->temp = (char *)(obj) - (char *) (h)->chunk,                     \
-  (((h)->temp > 0 && (h)->temp < (h)->chunk_limit - (char *) (h)->chunk)\
-   ? (int) ((h)->next_free = (h)->object_base                          \
-           = (h)->temp + (char *) (h)->chunk)                          \
-   : (((obstack_free) ((h), (h)->temp + (char *) (h)->chunk), 0), 0)))
-#else
-#define obstack_free(h,obj)                                            \
-( (h)->temp = (char *)(obj) - (char *) (h)->chunk,                     \
-  (((h)->temp > 0 && (h)->temp < (h)->chunk_limit - (char *) (h)->chunk)\
-   ? (int) ((h)->next_free = (h)->object_base                          \
-           = (h)->temp + (char *) (h)->chunk)                          \
-   : (_obstack_free ((h), (h)->temp + (char *) (h)->chunk), 0)))
-#endif
-
-#endif /* not __GNUC__ or not __STDC__ */
-
-#endif /* not __OBSTACKS__ */
diff --git a/gas/strerror.c b/gas/strerror.c
deleted file mode 100644 (file)
index 0e3d7f9..0000000
+++ /dev/null
@@ -1,61 +0,0 @@
-/* Version of strerror() for systems that need it.
-   Copyright (C) 1991, 1992 Free Software Foundation, Inc.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-
-/*
-
-NAME
-
-       strerror -- map an error number to an error message string
-
-SYNOPSIS
-
-       #include <string.h>
-
-       char *strerror (int errnum)
-
-DESCRIPTION
-
-       Returns a pointer to a string containing an error message, the
-       contents of which are implementation defined.  The implementation
-       shall behave as if no library function calls strerror.  The string
-       pointed to shall not be modified by the caller and is only guaranteed
-       to be valid until a subsequent call to strerror.
-       
-BUGS
-
-       Requires that the system have sys_errlist and sys_nerr.
-
-*/
-
-#ifndef HAVE_STRERROR
-
-extern int sys_nerr;
-extern char *sys_errlist[];
-
-char *
-strerror (code)
-     int code;
-{
-  return (((code < 0) || (code >= sys_nerr))
-         ? "(unknown error)"
-         : sys_errlist[code]);
-}
-
-#endif /* HAVE_STRERROR */
-
-/* end of strerror.c */
diff --git a/gas/strstr.c b/gas/strstr.c
deleted file mode 100644 (file)
index 2bb8890..0000000
+++ /dev/null
@@ -1,55 +0,0 @@
-/* strstr - find first occurrence of wanted in s
-
-   Copyright (C) 1989, 1990, 1991, 1992 Free Software Foundation.
-
-   This file is part of GAS, the GNU Assembler.
-
-   GAS is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
-   any later version.
-
-   GAS is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with GAS; see the file COPYING.  If not, write to
-   the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-/* If your compiler is really ansi, then you don't need this. */
-
-#if __STDC__ != 1
-
-#define SIZET int
-
-#define        NULL    0
-
-#include <string.h>
-
-char *                         /* found string, or NULL if none */
-strstr (s, wanted)
-     char *s;
-     char *wanted;
-{
-  register char *scan;
-  register SIZET len;
-  register char firstc;
-
-  /*
-        * The odd placement of the two tests is so "" is findable.
-        * Also, we inline the first char for speed.
-        * The ++ on scan has been moved down for optimization.
-        */
-  firstc = *wanted;
-  len = strlen (wanted);
-  for (scan = s; *scan != firstc || strncmp (scan, wanted, len) != 0;)
-    if (*scan++ == '\0')
-      return (NULL);
-  return (scan);
-}                              /* strstr() */
-
-#endif /* not __STDC__ */
-
-/* end of strstr.c */
diff --git a/gas/xrealloc.c b/gas/xrealloc.c
deleted file mode 100644 (file)
index a7da9f2..0000000
+++ /dev/null
@@ -1,69 +0,0 @@
-/* xrealloc.c - new memory or bust
-
-   Copyright (C) 1987, 1990, 1991, 1992 Free Software Foundation, Inc.
-
-   This file is part of GAS, the GNU Assembler.
-
-   GAS is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
-   any later version.
-
-   GAS is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with GAS; see the file COPYING.  If not, write to
-   the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-
-/*
-
-  NAME
-  xrealloc () - get more memory or bust
-  INDEX
-  xrealloc () uses realloc ()
-  SYNOPSIS
-  char   *my_memory;
-
-  my_memory = xrealloc (my_memory, 42);
-  / * my_memory gets (perhaps new) address of 42 chars * /
-
-  DESCRIPTION
-
-  Use xrealloc () as an "error-free" realloc ().It does almost the same
-  job.  When it cannot honour your request for memory it BOMBS your
-  program with a "virtual memory exceeded" message.  Realloc() returns
-  NULL and does not bomb your program.
-
-  SEE ALSO
-  realloc ()
-  */
-
-#if __STDC__ == 1
-#include <stdlib.h>
-#else
-#ifdef USG
-#include <malloc.h>
-#else
-char *realloc ();
-#endif /* USG */
-#endif /* not __STDC__ */
-
-#define error as_fatal
-
-char *
-xrealloc (ptr, n)
-     register char *ptr;
-     long n;
-{
-  void error ();
-
-  if ((ptr = realloc (ptr, (unsigned) n)) == 0)
-    error ("virtual memory exceeded");
-  return (ptr);
-}
-
-/* end of xrealloc.c */
index 1bec69d..e69de29 100755 (executable)
@@ -1,963 +0,0 @@
-M_MAKEFILE=./tconfig/none ./xconfig/none
-srcdir=.
-# "no target".
-# This can be used to build you a Makefile that only runs administrative
-# commands like 'clean', 'gdb.tar.Z', etc.
-# Target config file for "no target".  This can be used to build you
-# a Makefile that only runs administrative commands like 'clean',
-# 'gdb.tar.Z', etc.
-#
-# Copyright (C) 1990 Free Software Foundation, Inc.
-
-# This file is part of GDB.
-
-# GDB is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 1, or (at your option)
-# any later version.
-
-# GDB is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with GDB; see the file COPYING.  If not, write to
-# the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
-ALLDEPFILES = $(ALLDEPFILES_MAINDIR) $(ALLDEPFILES_SUBDIR)
-ALLDEPFILES_MAINDIR=\
-altos-xdep.c\
-am29k-pinsn.c\
-am29k-tdep.c\
-arm-convert.s\
-arm-pinsn.c\
-arm-tdep.c\
-arm-xdep.c\
-convex-pinsn.c\
-convex-tdep.c\
-convex-xdep.c\
-coredep.c\
-exec.c\
-gould-pinsn.c\
-gould-xdep.c\
-hp300ux-xdep.c\
-i386-pinsn.c\
-i386-tdep.c\
-i386-xdep.c\
-i960-pinsn.c\
-i960-tdep.c\
-infptrace.c\
-m68k-pinsn.c\
-m68k-tdep.c\
-m88k-pinsn.c\
-m88k-tdep.c\
-m88k-xdep.c\
-mips-pinsn.c\
-mips-tdep.c\
-mips-xdep.c\
-mipsread.c\
-news-xdep.c\
-nindy-tdep.c\
-ns32k-pinsn.c\
-pyr-pinsn.c\
-pyr-tdep.c\
-pyr-xdep.c\
-remote-eb.c\
-remote-nindy.c\
-remote-vx.c\
-solib.c\
-sparc-pinsn.c\
-sparc-tdep.c\
-sparc-xdep.c\
-sun3-xdep.c\
-sun386-xdep.c\
-symm-tdep.c\
-symm-xdep.c\
-tdesc.c\
-umax-xdep.c\
-vax-pinsn.c
-
-ALLDEPFILES_SUBDIR=\
-nindy-share/Onindy.c\
-nindy-share/nindy.c\
-nindy-share/ttybreak.c\
-nindy-share/ttyflush.c\
-vx-share/xdr_ld.c\
-vx-share/xdr_ptrace.c\
-vx-share/xdr_rdb.c\
-vx-share/xdr_regs.c
-
-ALLPARAM=\
-tm-29k.h\
-tm-3b1.h\
-tm-88k.h\
-tm-altos.h\
-tm-altosgas.h\
-tm-arm.h\
-tm-bigmips.h\
-tm-convex.h\
-tm-hp300bsd.h\
-tm-hp300hpux.h\
-tm-i386v-g.h\
-tm-i386v.h\
-tm-isi.h\
-tm-merlin.h\
-tm-mips.h\
-tm-news.h\
-tm-nindy960.h\
-tm-np1.h\
-tm-pn.h\
-tm-pyr.h\
-tm-sparc.h\
-tm-sun2.h\
-tm-sun2os4.h\
-tm-sun3.h\
-tm-sun386.h\
-tm-sun3os4.h\
-tm-sun4os4.h\
-tm-symmetry.h\
-tm-umax.h\
-tm-vax.h\
-tm-vx68.h\
-tm-vx960.h\
-xm-3b1.h\
-xm-88k.h\
-xm-altos.h\
-xm-arm.h\
-xm-bigmips.h\
-xm-convex.h\
-xm-hp300bsd.h\
-xm-hp300hpux.h\
-xm-i386v.h\
-xm-i386v32.h\
-xm-isi.h\
-xm-merlin.h\
-xm-mips.h\
-xm-news.h\
-xm-news1000.h\
-xm-np1.h\
-xm-pn.h\
-xm-pyr.h\
-xm-sparc.h\
-xm-sun2.h\
-xm-sun3.h\
-xm-sun386.h\
-xm-sun3os4.h\
-xm-sun4os4.h\
-xm-symmetry.h\
-xm-umax.h\
-xm-vax.h
-
-ALLCONFIG=\
-./tconfig/3b1\
-./tconfig/CVS.adm\
-./tconfig/altos\
-./tconfig/altosgas\
-./tconfig/am29k\
-./tconfig/arm\
-./tconfig/bigmips\
-./tconfig/convex\
-./tconfig/hp300bsd\
-./tconfig/hp300hpux\
-./tconfig/i386v\
-./tconfig/i386v-g\
-./tconfig/i386v32\
-./tconfig/i386v32-g\
-./tconfig/i960\
-./tconfig/isi\
-./tconfig/littlemips\
-./tconfig/m88k\
-./tconfig/m88k.orig\
-./tconfig/merlin\
-./tconfig/news\
-./tconfig/news1000\
-./tconfig/nindy960\
-./tconfig/none\
-./tconfig/np1\
-./tconfig/pn\
-./tconfig/pyramid\
-./tconfig/sun2os3\
-./tconfig/sun2os4\
-./tconfig/sun3\
-./tconfig/sun386\
-./tconfig/sun3os3\
-./tconfig/sun3os4\
-./tconfig/sun4\
-./tconfig/sun4os3\
-./tconfig/sun4os4\
-./tconfig/symmetry\
-./tconfig/umax\
-./tconfig/vax\
-./tconfig/vxworks68\
-./tconfig/vxworks960\
-./xconfig/3b1\
-./xconfig/CVS.adm\
-./xconfig/altos\
-./xconfig/altosgas\
-./xconfig/arm\
-./xconfig/bigmips\
-./xconfig/convex\
-./xconfig/hp300bsd\
-./xconfig/hp300hpux\
-./xconfig/i386v\
-./xconfig/i386v-g\
-./xconfig/i386v32\
-./xconfig/i386v32-g\
-./xconfig/isi\
-./xconfig/littlemips\
-./xconfig/m88k\
-./xconfig/m88k.orig\
-./xconfig/merlin\
-./xconfig/news\
-./xconfig/news1000\
-./xconfig/none\
-./xconfig/np1\
-./xconfig/pn\
-./xconfig/pyramid\
-./xconfig/sun2os3\
-./xconfig/sun2os4\
-./xconfig/sun3\
-./xconfig/sun386\
-./xconfig/sun3os3\
-./xconfig/sun3os4\
-./xconfig/sun4\
-./xconfig/sun4os3\
-./xconfig/sun4os4\
-./xconfig/symmetry\
-./xconfig/umax\
-./xconfig/vax
-
-##Copyright (C) 1989-1991 Free Software Foundation, Inc.
-
-# This file is part of GDB.
-
-# GDB is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 1, or (at your option)
-# any later version.
-
-# GDB is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with GDB; see the file COPYING.  If not, write to
-# the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
-
-# Place to install binaries. 
-bindir=/usr/local/bin
-
-# System V: If you compile gdb with a compiler which uses the coff
-# encapsulation feature (this is a function of the compiler used, NOT
-# of the m-?.h file selected by config.gdb), you must make sure that
-# the GNU nm is the one that is used by munch.
-
-# If you are compiling with GCC, make sure that either 1) You use the
-# -traditional flag, or 2) You have the fixed include files where GCC
-# can reach them.  Otherwise the ioctl calls in inflow.c and readline.c 
-# will be incorrectly compiled.  The "fixincludes" script in the gcc
-# distribution will fix your include files up.
-#CC=cc
-#CC=gcc -traditional
-GCC=gcc
-
-VPATH=$(srcdir)
-
-# It is also possible that you will need to add -I/usr/include/sys to the
-# CFLAGS section if your system doesn't have fcntl.h in /usr/include (which 
-# is where it should be according to Posix).
-
-YACC=bison -y
-# YACC=yacc
-SHELL=/bin/sh
-MAKE=make
-# We need either GNU m4 or SysV m4; Berkeley/Sun don't have quite enough.
-#M4=gm4
-M4=/usr/5bin/m4
-
-# Set this up with gcc if you have gnu ld and the loader will print out
-# line numbers for undefinded refs.
-#CC-LD=gcc -static
-CC-LD=${CC}
-
-# define this to be "gmalloc.o" if you want to use the gnu malloc routine
-# (useful for debugging memory allocation problems in gdb).  To use your
-# system malloc, uncomment the following two lines.
-#GNU_MALLOC =
-#MALLOC_CFLAGS = -DNO_MALLOC_CHECK
-GNU_MALLOC = gmalloc.o mcheck.o mtrace.o
-MALLOC_CFLAGS =
-
-# Where is the "include" directory?  Traditionally ../include or ./include
-INCLUDE_DIR =  ${srcdir}/../include
-INCLUDE_DEP = $$(INCLUDE_DIR)
-
-# Where is the source dir for the BFD library?  Traditionally ../bfd or ./bfd
-# (When we want the binary library built from it, we use ${BFD_DIR}${subdir}.)
-BFD_DIR =  ${srcdir}/../bfd
-BFD_DEP = $$(BFD_DIR)
-
-# All the includes used for CFLAGS and for lint.
-# -I. for config files.
-# -I${srcdir} possibly for regex.h also.
-INCLUDE_CFLAGS = -I. -I${srcdir} -I$(INCLUDE_DIR) -I${srcdir}/vx-share
-
-# {X,T}M_CFLAGS, if defined, has system-dependent CFLAGS.
-# CFLAGS for both GDB and readline.
-GLOBAL_CFLAGS = -g ${TM_CFLAGS} ${XM_CFLAGS}
-#PROFILE_CFLAGS = -pg
-
-CFLAGS = ${GLOBAL_CFLAGS} ${PROFILE_CFLAGS} ${MALLOC_CFLAGS} ${INCLUDE_CFLAGS}
-# None of the things in CFLAGS will do any harm, and on some systems
-#  (e.g. SunOS4) it is important to use the M_CFLAGS.
-LDFLAGS = $(CFLAGS)
-
-# Where is the "-liberty" library, containing getopt and obstack?
-LIBIBERTY_DIR = ${srcdir}/../libiberty
-LIBIBERTY = ${LIBIBERTY_DIR}${subdir}/libiberty.a
-
-# Flags that describe where you can find the termcap library.
-# You may need to make other arrangements for USG.
-TERMCAP = -ltermcap
-
-# You must define REGEX and REGEX1 on USG machines.
-# If your sysyem is missing alloca(), or, more likely, it's there but
-# it doesn't work, define ALLOCA & ALLOCA1
-
-# {X,T}M_CLIBS, if defined, has system-dependent libs
-# For example, -lPW for System V to get alloca().
-# FIXME STOPGAP FOR BFD LIBRARY: BFD stuff
-CLIBS = ${TERMCAP} $(XM_CLIBS) ${TM_CLIBS} ${BFD_DIR}${subdir}/libbfd.a \
-       ${LIBIBERTY}
-CDEPS = ${XM_CDEPS} ${TM_CDEPS} ${BFD_DIR}/libbfd.a \
-       ${LIBIBERTY}
-
-ADD_FILES = ${REGEX} ${ALLOCA} ${GNU_MALLOC}
-ADD_DEPS = ${REGEX1} ${ALLOCA1} ${GNU_MALLOC}
-
-VERSION = 3.95
-DIST=gdb-$(VERSION)
-
-LINT=/usr/5bin/lint
-LINTFLAGS=
-
-# Source files in the main directory.
-# Files which are included via a tconfig/* or xconfig/* file 
-# should *not* be specified here; they're in "ALLDEPFILES".
-SFILES_MAINDIR = \
-        blockframe.c breakpoint.c command.c core.c \
-        environ.c eval.c expprint.c findvar.c infcmd.c inflow.c infrun.c \
-        main.c printcmd.c \
-        remote.c source.c stack.c symmisc.c symtab.c symfile.c \
-        utils.c valarith.c valops.c valprint.c values.c expread.y \
-        signame.c cplus-dem.c mem-break.c target.c inftarg.c \
-        dbxread.c coffread.c \
-        ieee-float.c 
-
-# Source files in subdirectories (which will be handled separately by
-#  'make gdb.tar.Z').
-# Files which are included via a tconfig/* or xconfig/* file 
-# should *not* be specified here; they're in "ALLDEPFILES".
-SFILES_SUBDIR = \
-        ${srcdir}/vx-share/dbgRpcLib.h \
-        ${srcdir}/vx-share/ptrace.h \
-        ${srcdir}/vx-share/reg.h \
-        ${srcdir}/vx-share/vxTypes.h \
-        ${srcdir}/vx-share/vxWorks.h \
-        ${srcdir}/vx-share/wait.h \
-        ${srcdir}/vx-share/xdr_ld.h \
-        ${srcdir}/vx-share/xdr_ptrace.h \
-        ${srcdir}/vx-share/xdr_rdb.h \
-        ${srcdir}/vx-share/xdr_regs.h \
-        ${srcdir}/nindy-share/Makefile \
-        ${srcdir}/nindy-share/VERSION \
-        ${srcdir}/nindy-share/b.out.h \
-        ${srcdir}/nindy-share/block_io.h \
-        ${srcdir}/nindy-share/coff.h \
-        ${srcdir}/nindy-share/demux.h \
-        ${srcdir}/nindy-share/env.h \
-        ${srcdir}/nindy-share/stop.h \
-        ${srcdir}/nindy-share/ttycntl.h
-
-# All source files that go into linking GDB, except config-specified files.
-SFILES = $(SFILES_MAINDIR) $(SFILES_SUBDIR)
-
-# All source files that lint should look at
-LINTFILES = $(SFILES) expread.tab.c init.c
-
-# Any additional files specified on these lines should also be added to
-# the OTHERS = definition below, so they go in the tar files.
-SFILES_STAND = $(SFILES) standalone.c
-SFILES_KGDB  = $(SFILES) stuff.c kdb-start.c
-
-# Header files that are not named in tconfig/* or xconfig/* go here.
-HFILES=        breakpoint.h command.h defs.h environ.h \
-       expression.h frame.h gdbcmd.h gdbcore.h \
-       getpagesize.h ieee-float.h inferior.h param-no-tm.h param.h \
-       signals.h signame.h symfile.h symtab.h \
-       target.h tdesc.h terminal.h tm-68k.h tm-i960.h tm-sunos.h \
-       value.h
-
-OPCODES = pn-opcode.h np1-opcode.h sparc-opcode.h vax-opcode.h m68k-opcode.h \
-         ns32k-opcode.h convx-opcode.h pyr-opcode.h mips-opcode.h \
-         am29k-opcode.h
-
-REMOTE_EXAMPLES = rem-m68k.shar rem-multi.shar
-
-MALLOCSRC = gmalloc.c mcheck.c mtrace.c mtrace.awk \
-           ansidecl.h stdlib.h gmalloc.h stddef.h
-
-POSSLIBS_MAINDIR = regex.c regex.h alloca.c $(MALLOCSRC)
-POSSLIBS = $(POSSLIBS_MAINDIR)
-
-TESTS = testbpt.c testfun.c testrec.c testreg.c testregs.c
-
-# tdesc-lib cannot be named simply tdesc, because if if it were GNU make
-# would try to make it from tdesc.c.
-# tdesc-lib removed from the list due to Motorola copyrights...gnu@cygnus.com
-OTHERS = Makefile.dist depend alldeps.mak Makefile.sdir \
-        createtags munch config.gdb config.status \
-        ChangeLog ChangeLog-3.x \
-        README TODO TAGS WHATS.NEW \
-        doc \
-       .gdbinit COPYING expread.tab.c stab.def \
-        copying.c Projects Convex.notes copying.awk \
-        saber.suppress standalone.c stuff.c kdb-start.c \
-        hp-include # tests
-
-DEPFILES= ${TDEPFILES} ${XDEPFILES}
-
-SOURCES=$(SFILES) $(ALLDEPFILES)
-TAGFILES = $(SOURCES) ${HFILES} ${OPCODES} ${ALLPARAM} ${POSSLIBS} 
-TAGFILES_MAINDIR = $(SFILES_MAINDIR) $(ALLDEPFILES_MAINDIR) \
-             ${HFILES} ${OPCODES} ${ALLPARAM} ${POSSLIBS_MAINDIR} 
-TARFILES = ${TAGFILES_MAINDIR} ${OTHERS} ${REMOTE_EXAMPLES}
-
-OBS = main.o blockframe.o breakpoint.o findvar.o stack.o source.o \
-    values.o eval.o valops.o valarith.o valprint.o printcmd.o \
-    symtab.o symfile.o symmisc.o infcmd.o infrun.o remote.o \
-    command.o utils.o expread.o expprint.o environ.o version.o \
-    copying.o $(DEPFILES) signame.o cplus-dem.o mem-break.o target.o \
-    inftarg.o ieee-float.o putenv.o \
-    dbxread.o coffread.o # mipsread.o
-
-RAPP_OBS = rgdb.o rudp.o rserial.o serial.o udp.o $(XDEPFILES)
-
-TSOBS = core.o inflow.o
-
-NTSOBS = standalone.o
-
-TSSTART = /lib/crt0.o
-
-NTSSTART = kdb-start.o
-
-RL_LIB = readline/libreadline.a
-RL_LIB_DEP = $(RL_LIB)
-
-# Prevent Sun make from putting in the machine type.  Setting
-# TARGET_ARCH to nothing works for SunOS 3, 4.0, but not for 4.1.
-.c.o:
-       ${CC} -c ${CFLAGS} $<
-
-all: gdb
-
-install: gdb
-       cp gdb $(bindir)/gdb.new
-       mv $(bindir)/gdb.new $(bindir)/gdb
-       $(M_INSTALL)
-
-init.c: $(srcdir)/munch $(MUNCH_DEFINE) $(OBS) $(TSOBS)
-       $(srcdir)/munch ${MUNCH_DEFINE} $(OBS) $(TSOBS) > init.c
-
-gdb: $(OBS) $(TSOBS) ${ADD_DEPS} ${RL_LIB_DEP} ${CDEPS} init.o
-       ${CC-LD} $(LDFLAGS) -o gdb init.o $(OBS) $(TSOBS) $(ADD_FILES) \
-       ${RL_LIB} $(CLIBS)
-
-saber_gdb: $(SFILES) $(DEPFILES) copying.c version.c
-       #setopt load_flags $(CFLAGS) -I$(BFD_DIR) -DHOST_SYS=SUN4_SYS
-       #load ./init.c $(SFILES)
-       #unload ${srcdir}/expread.y ${srcdir}/vx-share/*.h
-       #unload ${srcdir}/nindy-share/[A-Z]*
-       #load ${srcdir}/expread.tab.c readline/libreadline.a
-       #load copying.c version.c
-       #load `echo " "$(DEPFILES) | sed -e 's/\.o/.c/g' -e 's, , ../,g'`
-       #load ${LIBIBERTY_DIR}/*.c
-       #load ${BFD_DIR}/*.c
-       #load -ltermcap 
-       ##void mcheck(a) void (*a)(); { }
-       ##void mtrace() { }
-
-
-
-# This is useful when debugging GDB, because some Unix's don't let you run GDB
-# on itself without copying the executable.  So "make gdb1" will make
-# gdb and put a copy in gdb1, and you can run it with "gdb gdb1".
-# Removing gdb1 before the copy is the right thing if gdb1 is open
-# in another process.
-gdb1: gdb
-       rm -f gdb1
-       cp gdb gdb1
-
-# This is a remote stub which runs under unix and starts up an
-# inferior process.  This is at least useful for debugging GDB's
-# remote support.
-rapp: $(RAPP_OBS)
-       rm -f rapp_init.c
-       ${srcdir}/munch ${RAPP_OBS} > rapp_init.c
-       ${CC-LD} $(LDFLAGS) -o $@ rapp_init.c $(RAPP_OBS)
-       
-Makefiles= Makefile.sdir $(M_MAKEFILE) \
-       ${srcdir}/alldeps.mak ${srcdir}/Makefile.dist
-
-MAKE_MAKEFILE= echo "M_MAKEFILE=$(M_MAKEFILE)" | \
-       cat - ${Makefiles} ${srcdir}/depend >Makefile
-
-Makefile: $(Makefiles)
-       $(MAKE_MAKEFILE)
-
-alldeps.mak: ${srcdir}/tconfig ${srcdir}/xconfig
-       rm -f alldeps.mak alldeps.tmp allparam.tmp allconfig.tmp
-       for i in `ls -d ${srcdir}/tconfig/*[0-9A-Za-z] \
-          ${srcdir}/xconfig/*[0-9A-Za-z] | grep -v RCS` ; do \
-         echo $$i >>allconfig.tmp; \
-         awk <$$i ' \
-           $$1 == "TDEPFILES=" || $$1 == "XDEPFILES=" { \
-             for (i = 2; i <= NF; i++) \
-               print $$i >> "alldeps.tmp" ; \
-            } \
-           $$1 == "TM_FILE=" || $$1 == "XM_FILE=" { \
-             print $$2 >> "allparam.tmp" }' ; \
-       done
-       sort <alldeps.tmp | uniq | \
-         sed -e 's/arm-convert.o/arm-convert.s/' \
-             -e 's!^Onindy.o!nindy-share/Onindy.c!' \
-             -e 's!^nindy.o!nindy-share/nindy.c!' \
-             -e 's!ttybreak.o!nindy-share/ttybreak.c!' \
-             -e 's!ttyflush.o!nindy-share/ttyflush.c!' \
-             -e 's!xdr_ld.o!vx-share/xdr_ld.c!' \
-             -e 's!xdr_ptrace.o!vx-share/xdr_ptrace.c!' \
-             -e 's!xdr_rdb.o!vx-share/xdr_rdb.c!' \
-             -e 's!xdr_regs.o!vx-share/xdr_regs.c!' \
-             -e 's/\.o/.c/' \
-           >alldeps2.tmp
-       echo 'ALLDEPFILES = $$(ALLDEPFILES_MAINDIR) $$(ALLDEPFILES_SUBDIR)' \
-           >>alldeps.mak;
-       grep -v / alldeps2.tmp | \
-         awk 'BEGIN {printf "ALLDEPFILES_MAINDIR="} \
-           NR == 0 {printf $$0;} \
-           NR != 0 {printf "\\\n" $$0} \
-           END {printf "\n\n"}' >>alldeps.mak;
-       grep / alldeps2.tmp | \
-         awk 'BEGIN {printf "ALLDEPFILES_SUBDIR="} \
-           NR == 0 {printf $$0;} \
-           NR != 0 {printf "\\\n" $$0} \
-           END {printf "\n\n"}' >>alldeps.mak;
-       sort <allparam.tmp | uniq | awk 'BEGIN {printf "ALLPARAM="} \
-           NR == 0 {printf $$0;} \
-           NR != 0 {printf "\\\n" $$0} \
-           END {printf "\n\n"}' >>alldeps.mak;
-       sort <allconfig.tmp | uniq | awk 'BEGIN {printf "ALLCONFIG="} \
-           NR == 0 {printf $$0;} \
-           NR != 0 {printf "\\\n" $$0} \
-           END {printf "\n\n"}' >>alldeps.mak;
-       rm -f alldeps.tmp alldeps2.tmp allparam.tmp allconfig.tmp
-
-# The sed script makes everything which depends on {x,t}m.h depend on
-# config.status as well, in case someone reconfigures gdb out from
-# under an already compiled gdb.
-depend: $(SOURCES) Makefile.dist
-       @echo Ignore errors about non-existent system-supplied include files
-       @echo for systems other than the one you are using.
-       @echo "If xm.h and tm.h don't exist, the error messages saying so"
-       @echo can safely be ignored.
-       @echo Also ignore parse errors in valops.c, and any errors in
-       @echo arm-convert.s.
-       -$(GCC) -MM $(CFLAGS) -I$(BFD_DIR) \
-           `ls $(SOURCES) | sort -u` >depend.tmp
-       <depend.tmp sed -e 's/ [xt]m.h/& config.status/g'  \
-         -e 's; vx-share/; $${srcdir}/vx-share/;g'  \
-         -e 's; nindy-share/; $${srcdir}/nindy-share/;g'  \
-         -e 's; $(INCLUDE_DIR)/; $(INCLUDE_DEP)/;g'  \
-         -e 's; [a-z0-9./]*bfd/; $(BFD_DEP)/;g'  \
-         -e 's; \./; $${srcdir}/;g'  \
-         >depend
-       $(MAKE_MAKEFILE)
-       rm depend.tmp
-
-config.status:
-       @echo "You must configure gdb.  Look at the README file for details."
-       @false
-
-# These are not generated by "make depend" because they only are there
-# for some machines.
-# But these rules don't do what we want; we want to hack the foo.o: tm.h
-# dependency to do the right thing.
-tm-isi.h tm-sun3.h tm-news.h tm-hp300bsd.h tm-altos.h : tm-68k.h
-tm-hp300hpux.h tm-sun2.h tm-3b1.h : tm-68k.h
-xm-news1000.h : xm-news.h
-xm-i386-sv32.h : xm-i386.h
-tm-i386gas.h: tm-i386.h
-xm-sun4os4.h : xm-sparc.h
-tm-sun4os4.h : tm-sparc.h
-
-kdb : $(NTSSTART) $(OBS) $(NTSOBS) ${ADD_DEPS} ${RL_LIB_DEP}
-       rm -f init.c
-       $(srcdir)/munch ${MUNCH_DEFINE} $(OBS) $(NTSOBS) > init.c
-       $(CC) $(LDFLAGS) -c init.c $(CLIBS) 
-       ld -o kdb $(NTSSTART) $(OBS) $(NTSOBS) init.o $(ADD_FILES) \
-       ${RL_LIB} -lc $(CLIBS)
-
-# Put the proper machine-specific files first.
-# createtags will edit the .o in DEPFILES into .c
-TAGS: ${TAGFILES}
-       $(srcdir)/createtags $(TM_FILE) ${XM_FILE} $(DEPFILES) ${TAGFILES}
-tags: TAGS
-
-# FIXME: Get alldeps.mak up to date, config.gdb none, THEN make gdb.tar.Z!
-gdb.tar.Z: ${TARFILES}
-       rm -f gdb.tar; rm -rf $(DIST)
-       cd readline ; make readline.tar
-       mkdir $(DIST)
-       cd $(DIST) ; for i in ${TARFILES} ; do ln -s ../$$i . ; done
-       mkdir $(DIST)/readline
-       cd $(DIST)/readline ; tar xf ../../readline/readline.tar
-       mkdir $(DIST)/xconfig ${DIST}/tconfig
-       cd $(DIST)/tconfig ; \
-         for i in $(ALLCONFIG) ; do ln -s ../../$$i ../$$i ; done
-       mkdir $(DIST)/vx-share $(DIST)/nindy-share
-       cd $(DIST)/tconfig ; \
-         for i in $(SFILES_SUBDIR) $(ALLDEPFILES_SUBDIR); \
-           do ln -s ../../$$i ../$$i ; done
-       tar chf - $(DIST) | compress >gdb.tar.Z
-       rm -rf $(DIST)
-
-clean:
-       rm -f ${OBS} ${TSOBS} ${NTSOBS} ${ADD_FILES}
-       rm -f init.c init.o version.c
-       rm -f gdb core gdb.tar gdb.tar.Z make.log
-       rm -f gdb[0-9]
-       rm -f gdb.dvi gdb-all*
-       cd readline ; make clean
-
-distclean: clean expread.tab.c TAGS
-       rm -f tm.h xm.h config.status
-       rm -f y.output yacc.acts yacc.tmp
-       rm -f ${TESTS} Makefile
-
-realclean: clean
-       rm -f expread.tab.c TAGS
-       rm -f tm.h xm.h config.status
-       rm -f Makefile
-
-gdb-all.texinfo: ${srcdir}/doc/gdb.texinfo
-       ${M4} $(srcdir)/doc/pretex.m4 $(srcdir)/doc/none.m4 $(srcdir)/doc/all.m4 $(srcdir)/doc/gdb.texinfo >gdb-all.texinfo
-
-gdb.dvi : gdb-all.texinfo
-       tex gdb-all.texinfo
-       texindex gdb-all.??
-       tex gdb-all.texinfo
-       mv gdb-all.dvi gdb.dvi
-       rm -f gdb-all.?? gdb-all.???
-
-# This should work eventually, but we're using texinfo2, and many makeinfo's 
-# can't cope with all the markup.  In the meantime, we distribute the info
-# files as formatted by the elisp texinfo2 code.
-#gdb.info: gdb-all.texinfo
-#      makeinfo gdb-all.texinfo
-
-# Make copying.c from COPYING
-copying.c : COPYING copying.awk
-       awk -f copying.awk < COPYING > copying.c
-
-version.c : Makefile.dist
-       echo 'char *version = "$(VERSION)";' >version.c
-
-${srcdir}/expread.tab.c : $(srcdir)/expread.y
-       @echo 'Expect 4 shift/reduce conflict.'
-       ${YACC} $(srcdir)/expread.y
-       mv y.tab.c ${srcdir}/expread.tab.c
-
-expread.o : ${srcdir}/expread.tab.c defs.h param.h symtab.h \
-            frame.h expression.h
-       $(CC) -c ${CFLAGS} `echo ${srcdir}/expread.tab.c | sed 's,^\./,,'`
-       mv expread.tab.o expread.o
-
-# dbxread, coffread, mipsread have dependencies on BFD header files.
-dbxread.o: ${srcdir}/dbxread.c
-       ${CC} -c ${CFLAGS} -I$(BFD_DIR) ${srcdir}/dbxread.c
-
-coffread.o: ${srcdir}/coffread.c
-       ${CC} -c ${CFLAGS} -I$(BFD_DIR) ${srcdir}/coffread.c
-
-mipsread.o: ${srcdir}/mipsread.c
-       ${CC} -c ${CFLAGS} -I$(BFD_DIR) ${srcdir}/mipsread.c
-
-# Drag in the files that are in another directory.
-
-xdr_ld.o: ${srcdir}/vx-share/xdr_ld.c
-       ${CC} -c ${CFLAGS} ${srcdir}/vx-share/xdr_ld.c
-
-xdr_ptrace.o: ${srcdir}/vx-share/xdr_ptrace.c
-       ${CC} -c ${CFLAGS} ${srcdir}/vx-share/xdr_ptrace.c
-
-xdr_rdb.o: ${srcdir}/vx-share/xdr_rdb.c
-       ${CC} -c ${CFLAGS} ${srcdir}/vx-share/xdr_rdb.c
-
-xdr_regs.o: ${srcdir}/vx-share/xdr_regs.c
-       ${CC} -c ${CFLAGS} ${srcdir}/vx-share/xdr_regs.c
-
-nindy.o: ${srcdir}/nindy-share/nindy.c
-       ${CC} -c ${CFLAGS} ${srcdir}/nindy-share/nindy.c
-
-Onindy.o: ${srcdir}/nindy-share/Onindy.c
-       ${CC} -c ${CFLAGS} ${srcdir}/nindy-share/Onindy.c
-
-ttybreak.o: ${srcdir}/nindy-share/ttybreak.c
-       ${CC} -c ${CFLAGS} ${srcdir}/nindy-share/ttybreak.c
-
-ttyflush.o: ${srcdir}/nindy-share/ttyflush.c
-       ${CC} -c ${CFLAGS} ${srcdir}/nindy-share/ttyflush.c
-
-tdesc-lib/libdc.o : force_update
-       cd tdesc-lib ; ${MAKE} "SYSV_DEFINE=${SYSV_DEFINE}"
-
-# In LOCAL_INCLUDES, -I${srcdir} is right if srcdir is an absolute path,
-# and -I../${srcdir} is right if it is relative (e.g. ".."), so search both.
-readline/libreadline.a : force_update
-       cd readline ; ${MAKE} "SYSV=${SYSV_DEFINE}"\
-               "VPATH=${srcdir}/readline:../${srcdir}/readline"\
-               "LOCAL_INCLUDES=-I../ -I${srcdir}/ -I../${srcdir}/"\
-               "DEBUG_FLAGS=${GLOBAL_CFLAGS}" "CC=${CC}" libreadline.a
-
-lint: $(LINTFILES)
-       $(LINT) $(INCLUDE_CFLAGS) $(LINTFLAGS) $(LINTFILES)
-
-gdb.cxref: $(SFILES)
-       cxref -I. $(SFILES) >gdb.cxref
-
-force_update :
-
-# When used with GDB, the demangler should never look for leading
-# underscores because GDB strips them off during symbol read-in.  Thus
-# -Dnounderscore.  
-
-cplus-dem.o : cplus-dem.c
-       ${CC} -c ${CFLAGS} -Dnounderscore \
-         `echo ${srcdir}/cplus-dem.c | sed 's,^\./,,'`
-altos-xdep.o : altos-xdep.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status frame.h \
-  inferior.h breakpoint.h value.h symtab.h gdbcore.h $(INCLUDE_DIR)/bfd.h \
-  $(INCLUDE_DIR)/ansidecl.h 
-am29k-pinsn.o : am29k-pinsn.c defs.h target.h am29k-opcode.h 
-am29k-tdep.o : am29k-tdep.c defs.h gdbcore.h $(INCLUDE_DIR)/bfd.h \
-  $(INCLUDE_DIR)/ansidecl.h $(INCLUDE_DIR)/obstack.h frame.h param.h tm.h config.status \
-  param-no-tm.h xm.h config.status value.h symtab.h inferior.h breakpoint.h 
-arm-pinsn.o : arm-pinsn.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status symtab.h \
-  arm-opcode.h 
-arm-tdep.o : arm-tdep.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status frame.h \
-  inferior.h breakpoint.h value.h symtab.h arm-opcode.h gdbcore.h \
-  $(INCLUDE_DIR)/bfd.h $(INCLUDE_DIR)/ansidecl.h 
-arm-xdep.o : arm-xdep.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status frame.h \
-  inferior.h breakpoint.h value.h symtab.h arm-opcode.h gdbcore.h \
-  $(INCLUDE_DIR)/bfd.h $(INCLUDE_DIR)/ansidecl.h 
-blockframe.o : blockframe.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status symtab.h \
-  frame.h gdbcore.h $(INCLUDE_DIR)/bfd.h $(INCLUDE_DIR)/ansidecl.h value.h \
-  target.h 
-breakpoint.o : breakpoint.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status symtab.h \
-  frame.h breakpoint.h value.h expression.h gdbcore.h $(INCLUDE_DIR)/bfd.h \
-  $(INCLUDE_DIR)/ansidecl.h gdbcmd.h command.h inferior.h target.h 
-coffread.o : coffread.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status symtab.h \
-  breakpoint.h value.h $(INCLUDE_DIR)/bfd.h $(INCLUDE_DIR)/ansidecl.h symfile.h \
-  $(BFD_DIR)/libcoff.h 
-command.o : command.c defs.h command.h symtab.h value.h 
-convex-pinsn.o : convex-pinsn.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status \
-  symtab.h convx-opcode.h 
-convex-tdep.o : convex-tdep.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status \
-  command.h symtab.h value.h frame.h inferior.h breakpoint.h \
-  $(INCLUDE_DIR)/wait.h gdbcore.h $(INCLUDE_DIR)/bfd.h $(INCLUDE_DIR)/ansidecl.h \
-  gdbcmd.h 
-convex-xdep.o : convex-xdep.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status \
-  command.h symtab.h value.h frame.h inferior.h breakpoint.h \
-  $(INCLUDE_DIR)/wait.h gdbcore.h $(INCLUDE_DIR)/bfd.h $(INCLUDE_DIR)/ansidecl.h \
-  gdbcmd.h 
-core.o : core.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status frame.h inferior.h \
-  breakpoint.h value.h symtab.h command.h $(INCLUDE_DIR)/bfd.h \
-  $(INCLUDE_DIR)/ansidecl.h target.h gdbcore.h 
-coredep.o : coredep.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status gdbcore.h \
-  $(INCLUDE_DIR)/bfd.h $(INCLUDE_DIR)/ansidecl.h $(INCLUDE_DIR)/obstack.h 
-cplus-dem.o : cplus-dem.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status 
-dbxread.o : dbxread.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status \
-  $(INCLUDE_DIR)/a.out.gnu.h $(INCLUDE_DIR)/reloc.h $(INCLUDE_DIR)/stab.gnu.h \
-  $(INCLUDE_DIR)/stab.def symtab.h breakpoint.h value.h command.h target.h \
-  gdbcore.h $(INCLUDE_DIR)/bfd.h $(INCLUDE_DIR)/ansidecl.h $(BFD_DIR)/liba.out.h \
-  symfile.h 
-environ.o : environ.c environ.h defs.h 
-eval.o : eval.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status symtab.h value.h \
-  expression.h target.h frame.h 
-exec.o : exec.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status frame.h inferior.h \
-  breakpoint.h value.h symtab.h target.h gdbcore.h $(INCLUDE_DIR)/bfd.h \
-  $(INCLUDE_DIR)/ansidecl.h 
-expprint.o : expprint.c defs.h symtab.h param.h tm.h config.status param-no-tm.h xm.h config.status \
-  expression.h value.h 
-findvar.o : findvar.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status symtab.h \
-  frame.h value.h gdbcore.h $(INCLUDE_DIR)/bfd.h $(INCLUDE_DIR)/ansidecl.h \
-  inferior.h breakpoint.h target.h 
-gould-pinsn.o : gould-pinsn.c gdbcore.h $(INCLUDE_DIR)/bfd.h \
-  $(INCLUDE_DIR)/ansidecl.h $(INCLUDE_DIR)/obstack.h defs.h param.h tm.h config.status \
-  param-no-tm.h xm.h config.status symtab.h frame.h np1-opcode.h 
-gould-xdep.o : gould-xdep.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status frame.h \
-  inferior.h breakpoint.h value.h symtab.h gdbcore.h $(INCLUDE_DIR)/bfd.h \
-  $(INCLUDE_DIR)/ansidecl.h 
-hp300ux-xdep.o : hp300ux-xdep.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status \
-  frame.h inferior.h breakpoint.h value.h symtab.h gdbcore.h \
-  $(INCLUDE_DIR)/bfd.h $(INCLUDE_DIR)/ansidecl.h 
-i386-pinsn.o : i386-pinsn.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status \
-  gdbcore.h $(INCLUDE_DIR)/bfd.h $(INCLUDE_DIR)/ansidecl.h $(INCLUDE_DIR)/obstack.h 
-i386-tdep.o : i386-tdep.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status frame.h \
-  inferior.h breakpoint.h value.h symtab.h gdbcore.h $(INCLUDE_DIR)/bfd.h \
-  $(INCLUDE_DIR)/ansidecl.h 
-i386-xdep.o : i386-xdep.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status frame.h \
-  inferior.h breakpoint.h value.h symtab.h gdbcore.h $(INCLUDE_DIR)/bfd.h \
-  $(INCLUDE_DIR)/ansidecl.h 
-i960-pinsn.o : i960-pinsn.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status frame.h \
-  inferior.h breakpoint.h value.h symtab.h 
-i960-tdep.o : i960-tdep.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status symtab.h \
-  value.h frame.h signame.h ieee-float.h 
-ieee-float.o : ieee-float.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status \
-  ieee-float.h 
-infcmd.o : infcmd.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status symtab.h frame.h \
-  inferior.h breakpoint.h value.h environ.h gdbcmd.h command.h gdbcore.h \
-  $(INCLUDE_DIR)/bfd.h $(INCLUDE_DIR)/ansidecl.h target.h 
-inflow.o : inflow.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status frame.h \
-  inferior.h breakpoint.h value.h symtab.h command.h signals.h terminal.h \
-  target.h 
-infptrace.o : infptrace.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status frame.h \
-  inferior.h breakpoint.h value.h symtab.h target.h gdbcore.h \
-  $(INCLUDE_DIR)/bfd.h $(INCLUDE_DIR)/ansidecl.h 
-infrun.o : infrun.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status symtab.h frame.h \
-  inferior.h breakpoint.h value.h $(INCLUDE_DIR)/wait.h gdbcore.h \
-  $(INCLUDE_DIR)/bfd.h $(INCLUDE_DIR)/ansidecl.h signame.h command.h terminal.h \
-  target.h 
-inftarg.o : inftarg.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status frame.h \
-  inferior.h breakpoint.h value.h symtab.h target.h $(INCLUDE_DIR)/wait.h \
-  gdbcore.h $(INCLUDE_DIR)/bfd.h $(INCLUDE_DIR)/ansidecl.h ieee-float.h 
-m68k-pinsn.o : m68k-pinsn.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status symtab.h \
-  m68k-opcode.h gdbcore.h $(INCLUDE_DIR)/bfd.h $(INCLUDE_DIR)/ansidecl.h 
-m68k-tdep.o : m68k-tdep.c defs.h ieee-float.h 
-main.o : main.c defs.h gdbcmd.h command.h param.h tm.h config.status param-no-tm.h xm.h config.status \
-  symtab.h inferior.h breakpoint.h value.h frame.h signals.h target.h 
-mem-break.o : mem-break.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status 
-mips-pinsn.o : mips-pinsn.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status symtab.h \
-  mips-opcode.h 
-mips-tdep.o : mips-tdep.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status frame.h \
-  inferior.h breakpoint.h value.h symtab.h gdbcmd.h command.h gdbcore.h \
-  $(INCLUDE_DIR)/bfd.h $(INCLUDE_DIR)/ansidecl.h 
-mips-xdep.o : mips-xdep.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status frame.h \
-  inferior.h breakpoint.h value.h symtab.h gdbcore.h $(INCLUDE_DIR)/bfd.h \
-  $(INCLUDE_DIR)/ansidecl.h 
-mipsread.o : mipsread.c param.h tm.h config.status param-no-tm.h xm.h config.status \
-  $(INCLUDE_DIR)/obstack.h defs.h symtab.h gdbcore.h $(INCLUDE_DIR)/bfd.h \
-  $(INCLUDE_DIR)/ansidecl.h symfile.h $(INCLUDE_DIR)/intel-coff.h 
-news-xdep.o : news-xdep.c 
-Onindy.o : ${srcdir}/nindy-share/Onindy.c ${srcdir}/nindy-share/ttycntl.h \
-  ${srcdir}/nindy-share/block_io.h $(INCLUDE_DIR)/wait.h ${srcdir}/nindy-share/env.h \
-  /usr/include/string.h 
-nindy.o : ${srcdir}/nindy-share/nindy.c ${srcdir}/nindy-share/ttycntl.h ${srcdir}/nindy-share/block_io.h \
-  $(INCLUDE_DIR)/wait.h ${srcdir}/nindy-share/env.h /usr/include/string.h 
-ttybreak.o : ${srcdir}/nindy-share/ttybreak.c ${srcdir}/nindy-share/ttycntl.h 
-ttyflush.o : ${srcdir}/nindy-share/ttyflush.c ${srcdir}/nindy-share/ttycntl.h 
-nindy-tdep.o : nindy-tdep.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status symtab.h \
-  frame.h 
-ns32k-pinsn.o : ns32k-pinsn.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status \
-  symtab.h ns32k-opcode.h gdbcore.h $(INCLUDE_DIR)/bfd.h \
-  $(INCLUDE_DIR)/ansidecl.h 
-printcmd.o : printcmd.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status frame.h \
-  symtab.h value.h expression.h gdbcore.h $(INCLUDE_DIR)/bfd.h \
-  $(INCLUDE_DIR)/ansidecl.h gdbcmd.h command.h target.h 
-pyr-pinsn.o : pyr-pinsn.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status symtab.h \
-  pyr-opcode.h gdbcore.h $(INCLUDE_DIR)/bfd.h $(INCLUDE_DIR)/ansidecl.h 
-pyr-tdep.o : pyr-tdep.c 
-pyr-xdep.o : pyr-xdep.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status frame.h \
-  inferior.h breakpoint.h value.h symtab.h gdbcore.h $(INCLUDE_DIR)/bfd.h \
-  $(INCLUDE_DIR)/ansidecl.h 
-remote-eb.o : remote-eb.c defs.h tm-29k.h param-no-tm.h xm.h config.status inferior.h \
-  breakpoint.h value.h symtab.h frame.h param.h $(INCLUDE_DIR)/wait.h \
-  terminal.h target.h 
-remote-nindy.o : remote-nindy.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status \
-  frame.h inferior.h breakpoint.h value.h symtab.h target.h gdbcore.h \
-  $(INCLUDE_DIR)/bfd.h $(INCLUDE_DIR)/ansidecl.h command.h ieee-float.h \
-  $(INCLUDE_DIR)/wait.h ${srcdir}/nindy-share/ttycntl.h ${srcdir}/nindy-share/demux.h \
-  ${srcdir}/nindy-share/env.h ${srcdir}/nindy-share/stop.h 
-remote-vx.o : remote-vx.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status frame.h \
-  inferior.h breakpoint.h value.h symtab.h $(INCLUDE_DIR)/wait.h target.h \
-  gdbcore.h $(INCLUDE_DIR)/bfd.h $(INCLUDE_DIR)/ansidecl.h command.h symfile.h \
-  ${srcdir}/vx-share/xdr_ptrace.h ${srcdir}/vx-share/xdr_regs.h ${srcdir}/vx-share/reg.h \
-  ${srcdir}/vx-share/xdr_ld.h ${srcdir}/vx-share/xdr_rdb.h ${srcdir}/vx-share/dbgRpcLib.h 
-remote.o : remote.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status frame.h \
-  inferior.h breakpoint.h value.h symtab.h target.h $(INCLUDE_DIR)/wait.h \
-  terminal.h 
-signame.o : signame.c signame.h defs.h param.h tm.h config.status param-no-tm.h xm.h config.status 
-solib.o : solib.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status symtab.h gdbcore.h \
-  $(INCLUDE_DIR)/bfd.h $(INCLUDE_DIR)/ansidecl.h command.h target.h frame.h 
-source.o : source.c defs.h symtab.h param.h tm.h config.status param-no-tm.h xm.h config.status \
-  command.h gdbcmd.h frame.h gdbcore.h $(INCLUDE_DIR)/bfd.h \
-  $(INCLUDE_DIR)/ansidecl.h regex.h 
-sparc-pinsn.o : sparc-pinsn.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status \
-  symtab.h sparc-opcode.h gdbcore.h $(INCLUDE_DIR)/bfd.h \
-  $(INCLUDE_DIR)/ansidecl.h /usr/include/string.h target.h 
-sparc-tdep.o : sparc-tdep.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status frame.h \
-  inferior.h breakpoint.h value.h symtab.h signame.h target.h ieee-float.h \
-  gdbcore.h $(INCLUDE_DIR)/bfd.h $(INCLUDE_DIR)/ansidecl.h 
-sparc-xdep.o : sparc-xdep.c defs.h tm-sparc.h param-no-tm.h xm.h config.status inferior.h \
-  breakpoint.h value.h symtab.h frame.h param.h target.h gdbcore.h \
-  $(INCLUDE_DIR)/bfd.h $(INCLUDE_DIR)/ansidecl.h 
-stack.o : stack.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status symtab.h frame.h \
-  gdbcmd.h command.h value.h gdbcore.h $(INCLUDE_DIR)/bfd.h \
-  $(INCLUDE_DIR)/ansidecl.h target.h breakpoint.h 
-sun3-xdep.o : sun3-xdep.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status inferior.h \
-  breakpoint.h value.h symtab.h frame.h gdbcore.h $(INCLUDE_DIR)/bfd.h \
-  $(INCLUDE_DIR)/ansidecl.h 
-sun386-xdep.o : sun386-xdep.c 
-symfile.o : symfile.c defs.h symtab.h param.h tm.h config.status param-no-tm.h xm.h config.status \
-  gdbcore.h $(INCLUDE_DIR)/bfd.h $(INCLUDE_DIR)/ansidecl.h frame.h target.h \
-  value.h symfile.h gdbcmd.h command.h breakpoint.h 
-symm-tdep.o : symm-tdep.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status frame.h \
-  inferior.h breakpoint.h value.h symtab.h gdbcore.h $(INCLUDE_DIR)/bfd.h \
-  $(INCLUDE_DIR)/ansidecl.h 
-symm-xdep.o : symm-xdep.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status frame.h \
-  inferior.h breakpoint.h value.h symtab.h gdbcore.h $(INCLUDE_DIR)/bfd.h \
-  $(INCLUDE_DIR)/ansidecl.h 
-symmisc.o : symmisc.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status symtab.h \
-  breakpoint.h value.h command.h 
-symtab.o : symtab.c defs.h symtab.h param.h tm.h config.status param-no-tm.h xm.h config.status \
-  gdbcore.h $(INCLUDE_DIR)/bfd.h $(INCLUDE_DIR)/ansidecl.h frame.h target.h \
-  value.h symfile.h gdbcmd.h command.h 
-target.o : target.c defs.h target.h gdbcmd.h command.h symtab.h inferior.h \
-  breakpoint.h value.h frame.h param.h tm.h config.status param-no-tm.h xm.h config.status \
-  $(INCLUDE_DIR)/bfd.h $(INCLUDE_DIR)/ansidecl.h symfile.h 
-tdesc.o : tdesc.c 
-umax-xdep.o : umax-xdep.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status frame.h \
-  inferior.h breakpoint.h value.h symtab.h gdbcore.h $(INCLUDE_DIR)/bfd.h \
-  $(INCLUDE_DIR)/ansidecl.h 
-utils.o : utils.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status signals.h gdbcmd.h \
-  command.h terminal.h $(INCLUDE_DIR)/bfd.h $(INCLUDE_DIR)/ansidecl.h \
-  $(INCLUDE_DIR)/obstack.h target.h 
-valarith.o : valarith.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status value.h \
-  symtab.h expression.h target.h 
-valops.o : valops.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status symtab.h value.h \
-  frame.h inferior.h breakpoint.h gdbcore.h $(INCLUDE_DIR)/bfd.h \
-  $(INCLUDE_DIR)/ansidecl.h target.h 
-valprint.o : valprint.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status symtab.h \
-  value.h gdbcore.h $(INCLUDE_DIR)/bfd.h $(INCLUDE_DIR)/ansidecl.h gdbcmd.h \
-  command.h target.h 
-values.o : values.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status symtab.h value.h \
-  gdbcore.h $(INCLUDE_DIR)/bfd.h $(INCLUDE_DIR)/ansidecl.h frame.h command.h \
-  gdbcmd.h 
-vax-pinsn.o : vax-pinsn.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status symtab.h \
-  vax-opcode.h 
-xdr_ld.o : ${srcdir}/vx-share/xdr_ld.c ${srcdir}/vx-share/vxWorks.h ${srcdir}/vx-share/vxTypes.h \
-  /usr/include/rpc/rpc.h ${srcdir}/vx-share/xdr_ld.h 
-xdr_ptrace.o : ${srcdir}/vx-share/xdr_ptrace.c 
-xdr_rdb.o : ${srcdir}/vx-share/xdr_rdb.c ${srcdir}/vx-share/vxWorks.h ${srcdir}/vx-share/vxTypes.h \
-  ${srcdir}/vx-share/xdr_rdb.h 
-xdr_regs.o : ${srcdir}/vx-share/xdr_regs.c 
diff --git a/gdb/Makefile.dist b/gdb/Makefile.dist
deleted file mode 100755 (executable)
index 94040a5..0000000
+++ /dev/null
@@ -1,575 +0,0 @@
-##Copyright (C) 1989-1991 Free Software Foundation, Inc.
-
-# This file is part of GDB.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-# 
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-# 
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-# Destination directory of the software tree build
-destdir = /usr/local
-
-# Place to install binaries in the destination tree. 
-bindir=$(destdir)/bin
-
-# System V: If you compile gdb with a compiler which uses the coff
-# encapsulation feature (this is a function of the compiler used, NOT
-# of the m-?.h file selected by config.gdb), you must make sure that
-# the GNU nm is the one that is used by munch.
-
-# If you are compiling with GCC, make sure that either 1) You use the
-# -traditional flag, or 2) You have the fixed include files where GCC
-# can reach them.  Otherwise the ioctl calls in inflow.c
-# will be incorrectly compiled.  The "fixincludes" script in the gcc
-# distribution will fix your include files up.
-#CC=cc
-#CC=gcc -traditional
-GCC=gcc
-
-VPATH=$(srcdir)
-
-# It is also possible that you will need to add -I/usr/include/sys to the
-# CFLAGS section if your system doesn't have fcntl.h in /usr/include (which 
-# is where it should be according to Posix).
-
-YACC=bison -y
-# YACC=yacc
-SHELL=/bin/sh
-MAKE=make
-
-# Documentation (gdb.dvi) needs either GNU m4 or SysV m4; 
-# Berkeley/Sun don't have quite enough. 
-#M4=/usr/5bin/m4
-M4=gm4
-# where to find texinfo; if you have PostScript fonts you may want to try 
-# the Cygnus mods (which also have different header/footer layout)
-#TEXIDIR=${srcdir}/../texinfo/cygnus
-TEXIDIR=${srcdir}/../texinfo/fsf
-
-# Set this up with gcc if you have gnu ld and the loader will print out
-# line numbers for undefinded refs.
-#CC-LD=gcc -static
-CC-LD=${CC}
-
-# define this to be "gmalloc.o" if you want to use the gnu malloc routine
-# (useful for debugging memory allocation problems in gdb).  To use your
-# system malloc, uncomment the following two lines.
-#GNU_MALLOC =
-#MALLOC_CFLAGS = -DNO_MALLOC_CHECK
-GNU_MALLOC = gmalloc.o mcheck.o mtrace.o
-MALLOC_CFLAGS =
-
-# Where is the "include" directory?  Traditionally ../include or ./include
-INCLUDE_DIR =  ${srcdir}/../include
-INCLUDE_DEP = $$(INCLUDE_DIR)
-
-# Where is the source dir for the BFD library?  Traditionally ../bfd or ./bfd
-# (When we want the binary library built from it, we use ${BFD_DIR}${subdir}.)
-BFD_DIR =  ${srcdir}/../bfd
-BFD_DEP = $$(BFD_DIR)
-BFD_LIB = $(BFD_DIR)${subdir}/libbfd.a
-
-# Where is the source dir for the READLINE library?  Traditionally in .. or .
-# (For the binary library built from it, we use ${READLINE_DIR}${subdir}.)
-READLINE_DIR = ${srcdir}/../readline
-READLINE_DEP = $$(READLINE_DIR)
-RL_LIB = $(READLINE_DIR)${subdir}/libreadline.a
-
-# All the includes used for CFLAGS and for lint.
-# -I. for config files.
-# -I${srcdir} possibly for regex.h also.
-INCLUDE_CFLAGS = -I. -I${srcdir} -I$(INCLUDE_DIR) -I$(READLINE_DIR) -I${srcdir}/vx-share
-
-# {X,T}M_CFLAGS, if defined, has system-dependent CFLAGS.
-# CFLAGS for GDB
-GLOBAL_CFLAGS = -g ${TM_CFLAGS} ${XM_CFLAGS}
-#PROFILE_CFLAGS = -pg
-
-CFLAGS = ${GLOBAL_CFLAGS} ${PROFILE_CFLAGS} ${MALLOC_CFLAGS} ${INCLUDE_CFLAGS}
-# None of the things in CFLAGS will do any harm, and on some systems
-#  (e.g. SunOS4) it is important to use the M_CFLAGS.
-LDFLAGS = $(CFLAGS)
-
-# Where is the "-liberty" library, containing getopt and obstack?
-LIBIBERTY_DIR = ${srcdir}/../libiberty
-LIBIBERTY = ${LIBIBERTY_DIR}${subdir}/libiberty.a
-
-# Flags that describe where you can find the termcap library.
-# You may need to make other arrangements for USG.
-TERMCAP = -ltermcap
-
-# The xconfig file must define REGEX and REGEX1 on USG machines.
-# If your sysyem is missing alloca(), or, more likely, it's there but
-# it doesn't work, define ALLOCA & ALLOCA1 too.
-# If your system is missing putenv(), add putenv.c to XM_ADD_FILES.
-
-# Libraries and corresponding dependencies for compiling gdb.
-# {X,T}M_CLIBS, defined in *config files, have host- and target-dependent libs.
-# TERMCAP comes last, since readline depends on it.
-CLIBS = $(XM_CLIBS) ${TM_CLIBS} ${BFD_LIB} ${LIBIBERTY} ${RL_LIB} ${TERMCAP}
-CDEPS = ${XM_CDEPS} ${TM_CDEPS} ${BFD_LIB} ${LIBIBERTY} ${RL_LIB}
-
-ADD_FILES = ${REGEX} ${ALLOCA}  ${GNU_MALLOC} ${XM_ADD_FILES} ${TM_ADD_FILES}
-ADD_DEPS = ${REGEX1} ${ALLOCA1} ${GNU_MALLOC} ${XM_ADD_FILES} ${TM_ADD_FILES}
-
-VERSION = 3.96
-DIST=gdb-$(VERSION)
-
-LINT=/usr/5bin/lint
-LINTFLAGS=
-
-# Source files in the main directory.
-# Files which are included via a tconfig/* or xconfig/* file 
-# should *not* be specified here; they're in "ALLDEPFILES".
-SFILES_MAINDIR = \
-        blockframe.c breakpoint.c command.c core.c \
-        environ.c eval.c expprint.c findvar.c infcmd.c inflow.c infrun.c \
-        main.c printcmd.c \
-        remote.c source.c stack.c symmisc.c symtab.c symfile.c \
-        utils.c valarith.c valops.c valprint.c values.c expread.y \
-        signame.c cplus-dem.c mem-break.c target.c inftarg.c \
-        dbxread.c coffread.c \
-        ieee-float.c 
-
-# Source files in subdirectories (which will be handled separately by
-#  'make gdb.tar.Z').
-# Files which are included via a tconfig/* or xconfig/* file 
-# should *not* be specified here; they're in "ALLDEPFILES".
-SFILES_SUBDIR = \
-        ${srcdir}/vx-share/dbgRpcLib.h \
-        ${srcdir}/vx-share/ptrace.h \
-        ${srcdir}/vx-share/reg.h \
-        ${srcdir}/vx-share/vxTypes.h \
-        ${srcdir}/vx-share/vxWorks.h \
-        ${srcdir}/vx-share/wait.h \
-        ${srcdir}/vx-share/xdr_ld.h \
-        ${srcdir}/vx-share/xdr_ptrace.h \
-        ${srcdir}/vx-share/xdr_rdb.h \
-        ${srcdir}/vx-share/xdr_regs.h \
-        ${srcdir}/nindy-share/Makefile \
-        ${srcdir}/nindy-share/VERSION \
-        ${srcdir}/nindy-share/b.out.h \
-        ${srcdir}/nindy-share/block_io.h \
-        ${srcdir}/nindy-share/coff.h \
-        ${srcdir}/nindy-share/demux.h \
-        ${srcdir}/nindy-share/env.h \
-        ${srcdir}/nindy-share/stop.h \
-        ${srcdir}/nindy-share/ttycntl.h
-
-# All source files that go into linking GDB, except config-specified files.
-SFILES = $(SFILES_MAINDIR) $(SFILES_SUBDIR)
-
-# All source files that lint should look at
-LINTFILES = $(SFILES) expread.tab.c init.c
-
-# Documentation source files
-SFILES_DOCDIR = \
-       ${srcdir}/doc/gdb.texinfo    \
-       ${srcdir}/doc/pretex.m4      \
-       ${srcdir}/doc/none.m4        \
-       ${srcdir}/doc/all.m4         \
-       ${srcdir}/doc/gdb.alter-m4   \
-       ${srcdir}/doc/gdb.bugs-m4    \
-       ${srcdir}/doc/gdb.canned-m4  \
-       ${srcdir}/doc/gdb.cmds-m4    \
-       ${srcdir}/doc/gdb.ctl-m4     \
-       ${srcdir}/doc/gdb.data-m4    \
-       ${srcdir}/doc/gdb.emacs-m4   \
-       ${srcdir}/doc/gdb.files-m4   \
-       ${srcdir}/doc/gdb.gpl-m4     \
-       ${srcdir}/doc/gdb.install-m4 \
-       ${srcdir}/doc/gdb.inv.m-m4   \
-       ${srcdir}/doc/gdb.inv.s-m4   \
-       ${srcdir}/doc/gdb.invoc-m4   \
-       ${srcdir}/doc/gdb.rdln-m4    \
-       ${srcdir}/doc/gdb.rename-m4  \
-       ${srcdir}/doc/gdb.run-m4     \
-       ${srcdir}/doc/gdb.sample-m4  \
-       ${srcdir}/doc/gdb.src-m4     \
-       ${srcdir}/doc/gdb.stack-m4   \
-       ${srcdir}/doc/gdb.stop-m4    \
-       ${srcdir}/doc/gdb.symb-m4    \
-       ${srcdir}/doc/gdb.tgts-m4    \
-       ${srcdir}/doc/gdb.top-m4     
-
-# Any additional files specified on these lines should also be added to
-# the OTHERS = definition below, so they go in the tar files.
-SFILES_STAND = $(SFILES) standalone.c
-SFILES_KGDB  = $(SFILES) stuff.c kdb-start.c
-
-# Header files that are not named in tconfig/* or xconfig/* go here.
-HFILES=        breakpoint.h command.h defs.h environ.h \
-       expression.h frame.h gdbcmd.h gdbcore.h \
-       getpagesize.h ieee-float.h inferior.h param-no-tm.h param.h \
-       signals.h signame.h symfile.h symtab.h \
-       target.h tdesc.h terminal.h tm-68k.h tm-i960.h tm-sunos.h \
-       value.h
-
-# Header files for machine opcode tables.
-# when OPCODE_DIR changes to ../include, remove the whole $(OPCODES)
-# business, since they will be included in the separate includes tar file
-# rather than in the gdb tar file.
-OPCODE_DIR =
-OPCODES = $(OPCODE_DIR)pn-opcode.h $(OPCODE_DIR)np1-opcode.h \
-       $(OPCODE_DIR)sparc-opcode.h $(OPCODE_DIR)vax-opcode.h \
-       $(OPCODE_DIR)m68k-opcode.h $(OPCODE_DIR)ns32k-opcode.h \
-       $(OPCODE_DIR)convx-opcode.h $(OPCODE_DIR)pyr-opcode.h \
-       $(OPCODE_DIR)mips-opcode.h $(OPCODE_DIR)am29k-opcode.h \
-       $(OPCODE_DIR)arm-opcode.h $(OPCODE_DIR)m88k-opcode.h \
-       $(OPCODE_DIR)tahoe-opcode.h
-
-REMOTE_EXAMPLES = m68k-stub.c i386-stub.c rem-multi.shar
-
-MALLOCSRC = gmalloc.c mcheck.c mtrace.c mtrace.awk \
-           ansidecl.h gmalloc.h
-
-POSSLIBS_MAINDIR = regex.c regex.h alloca.c $(MALLOCSRC)
-POSSLIBS = $(POSSLIBS_MAINDIR)
-
-TESTS = testbpt.c testfun.c testrec.c testreg.c testregs.c
-
-# tdesc-lib cannot be named simply tdesc, because if it were, GNU make
-# would try to make it from tdesc.c.
-# tdesc-lib removed from the list due to Motorola copyrights...gnu@cygnus.com
-OTHERS = Makefile Makefile.dist depend alldeps.mak Makefile.sdir \
-        createtags munch config.gdb config.status \
-        ChangeLog ChangeLog-3.x \
-        README TODO TAGS WHATS.NEW Projects \
-        .gdbinit COPYING expread.tab.c \
-        copying.c Convex.notes copying.awk \
-        saber.suppress standalone.c stuff.c kdb-start.c \
-        putenv.c
-
-# Subdirectories of gdb, which should be included in their entirety in
-# gdb-xxx.tar.Z:
-TARDIRS = doc hp-include # tests
-
-DEPFILES= ${TDEPFILES} ${XDEPFILES}
-
-SOURCES=$(SFILES) $(ALLDEPFILES)
-TAGFILES = $(SOURCES) ${HFILES} ${OPCODES} ${ALLPARAM} ${POSSLIBS} 
-TAGFILES_MAINDIR = $(SFILES_MAINDIR) $(ALLDEPFILES_MAINDIR) \
-             ${HFILES} ${OPCODES} ${ALLPARAM} ${POSSLIBS_MAINDIR} 
-TARFILES = ${TAGFILES_MAINDIR} ${OTHERS} ${REMOTE_EXAMPLES}
-
-OBS = main.o blockframe.o breakpoint.o findvar.o stack.o source.o \
-    values.o eval.o valops.o valarith.o valprint.o printcmd.o \
-    symtab.o symfile.o symmisc.o infcmd.o infrun.o remote.o \
-    command.o utils.o expread.o expprint.o environ.o version.o \
-    copying.o $(DEPFILES) signame.o cplus-dem.o mem-break.o target.o \
-    inftarg.o ieee-float.o putenv.o \
-    dbxread.o coffread.o # mipsread.o
-
-RAPP_OBS = rgdb.o rudp.o rserial.o serial.o udp.o $(XDEPFILES)
-
-TSOBS = core.o inflow.o
-
-NTSOBS = standalone.o
-
-TSSTART = /lib/crt0.o
-
-NTSSTART = kdb-start.o
-
-# Prevent Sun make from putting in the machine type.  Setting
-# TARGET_ARCH to nothing works for SunOS 3, 4.0, but not for 4.1.
-.c.o:
-       ${CC} -c ${CFLAGS} $<
-
-all: gdb
-
-install: gdb
-       cp gdb $(bindir)/gdb.new
-       mv $(bindir)/gdb.new $(bindir)/gdb
-       $(M_INSTALL)
-
-init.c: $(srcdir)/munch $(MUNCH_DEFINE) $(OBS) $(TSOBS)
-       $(srcdir)/munch ${MUNCH_DEFINE} $(OBS) $(TSOBS) > init.c
-
-gdb: $(OBS) $(TSOBS) ${ADD_DEPS} ${CDEPS} init.o
-       ${CC-LD} $(LDFLAGS) -o gdb init.o $(OBS) $(TSOBS) $(ADD_FILES) \
-         $(CLIBS)
-
-saber_gdb: $(SFILES) $(DEPFILES) copying.c version.c
-       #setopt load_flags $(CFLAGS) -I$(BFD_DIR) -DHOST_SYS=SUN4_SYS
-       #load ./init.c $(SFILES)
-       #unload ${srcdir}/expread.y ${srcdir}/vx-share/*.h
-       #unload ${srcdir}/nindy-share/[A-Z]*
-       #load ${srcdir}/expread.tab.c
-       #load copying.c version.c
-       #load `echo " "$(DEPFILES) | sed -e 's/\.o/.c/g' -e 's, , ../,g'`
-       #load ${LIBIBERTY_DIR}/*.c
-       #load ${BFD_DIR}/*.c
-       #load ${READLINE_DIR}/*.c
-       #load -ltermcap 
-       ##void mcheck(a) void (*a)(); { }
-       ##void mtrace() { }
-
-
-
-# This is useful when debugging GDB, because some Unix's don't let you run GDB
-# on itself without copying the executable.  So "make gdb1" will make
-# gdb and put a copy in gdb1, and you can run it with "gdb gdb1".
-# Removing gdb1 before the copy is the right thing if gdb1 is open
-# in another process.
-gdb1: gdb
-       rm -f gdb1
-       cp gdb gdb1
-
-# This is a remote stub which runs under unix and starts up an
-# inferior process.  This is at least useful for debugging GDB's
-# remote support.
-rapp: $(RAPP_OBS)
-       rm -f rapp_init.c
-       ${srcdir}/munch ${RAPP_OBS} > rapp_init.c
-       ${CC-LD} $(LDFLAGS) -o $@ rapp_init.c $(RAPP_OBS)
-       
-# Support for building Makefile out of configured pieces, automatically
-# generated dependencies, etc.
-Makefiles= Makefile.sdir $(M_MAKEFILE) \
-       ${srcdir}/alldeps.mak ${srcdir}/Makefile.dist
-
-MAKE_MAKEFILE= echo "M_MAKEFILE=$(M_MAKEFILE)" | \
-       cat - ${Makefiles} ${srcdir}/depend > Makefile
-
-Makefile: $(Makefiles)
-       $(MAKE_MAKEFILE)
-
-alldeps.mak: ${srcdir}/tconfig ${srcdir}/xconfig
-       rm -f alldeps.mak alldeps.tmp allparam.tmp allconfig.tmp
-       for i in `ls -d ${srcdir}/tconfig/*[0-9A-Za-z] \
-            ${srcdir}/xconfig/*[0-9A-Za-z] | \
-           grep -v RCS | grep -v CVS.adm | grep -v SCCS` ; do \
-         echo $$i >>allconfig.tmp; \
-         awk <$$i ' \
-           $$1 == "TDEPFILES=" || $$1 == "XDEPFILES=" { \
-             for (i = 2; i <= NF; i++) \
-               print $$i >> "alldeps.tmp" ; \
-            } \
-           $$1 == "TM_FILE=" || $$1 == "XM_FILE=" { \
-             print $$2 >> "allparam.tmp" }' ; \
-       done
-       sort <alldeps.tmp | uniq | \
-         sed -e 's/arm-convert.o/arm-convert.s/' \
-             -e 's!^Onindy.o!nindy-share/Onindy.c!' \
-             -e 's!^nindy.o!nindy-share/nindy.c!' \
-             -e 's!ttybreak.o!nindy-share/ttybreak.c!' \
-             -e 's!ttyflush.o!nindy-share/ttyflush.c!' \
-             -e 's!xdr_ld.o!vx-share/xdr_ld.c!' \
-             -e 's!xdr_ptrace.o!vx-share/xdr_ptrace.c!' \
-             -e 's!xdr_rdb.o!vx-share/xdr_rdb.c!' \
-             -e 's!xdr_regs.o!vx-share/xdr_regs.c!' \
-             -e 's/\.o/.c/' \
-           >alldeps2.tmp
-       echo 'ALLDEPFILES = $$(ALLDEPFILES_MAINDIR) $$(ALLDEPFILES_SUBDIR)' \
-           >>alldeps.mak;
-       grep -v / alldeps2.tmp | \
-         awk 'BEGIN {printf "ALLDEPFILES_MAINDIR="} \
-           NR == 0 {printf $$0;} \
-           NR != 0 {printf "\\\n" $$0} \
-           END {printf "\n\n"}' >>alldeps.mak;
-       grep / alldeps2.tmp | \
-         awk 'BEGIN {printf "ALLDEPFILES_SUBDIR="} \
-           NR == 0 {printf $$0;} \
-           NR != 0 {printf "\\\n" $$0} \
-           END {printf "\n\n"}' >>alldeps.mak;
-       sort <allparam.tmp | uniq | awk 'BEGIN {printf "ALLPARAM="} \
-           NR == 0 {printf $$0;} \
-           NR != 0 {printf "\\\n" $$0} \
-           END {printf "\n\n"}' >>alldeps.mak;
-       sort <allconfig.tmp | uniq | awk 'BEGIN {printf "ALLCONFIG="} \
-           NR == 0 {printf $$0;} \
-           NR != 0 {printf "\\\n" $$0} \
-           END {printf "\n\n"}' >>alldeps.mak;
-       rm -f alldeps.tmp alldeps2.tmp allparam.tmp allconfig.tmp
-
-# The sed script makes everything which depends on {x,t}m.h depend on
-# config.status as well, in case someone reconfigures gdb out from
-# under an already compiled gdb.
-depend: $(SOURCES) Makefile.dist
-       @echo Ignore errors about non-existent system-supplied include files
-       @echo for systems other than the one you are using.
-       @echo "If xm.h and tm.h don't exist, the error messages saying so"
-       @echo can safely be ignored.
-       @echo Also ignore parse errors in valops.c, and any errors in
-       @echo arm-convert.s.
-       -$(GCC) -MM $(CFLAGS) -I$(BFD_DIR) \
-         `ls $(SOURCES) | grep -v \.h$$ |sort -u` >depend.tmp
-       <depend.tmp sed -e 's/ [xt]m.h/& config.status/g'  \
-         -e 's; vx-share/; $${srcdir}/vx-share/;g'  \
-         -e 's; nindy-share/; $${srcdir}/nindy-share/;g'  \
-         -e 's; $(INCLUDE_DIR)/; $(INCLUDE_DEP)/;g'  \
-         -e 's; $(READLINE_DIR)/; $(READLINE_DEP)/;g'  \
-         -e 's; [a-z0-9./]*bfd/; $(BFD_DEP)/;g'  \
-         -e 's; \./; $${srcdir}/;g'  \
-         >depend
-       $(MAKE_MAKEFILE)
-       rm depend.tmp
-
-config.status:
-       @echo "You must configure gdb.  Look at the README file for details."
-       @false
-
-# These are not generated by "make depend" because they only are there
-# for some machines.
-# But these rules don't do what we want; we want to hack the foo.o: tm.h
-# dependency to do the right thing.
-tm-isi.h tm-sun3.h tm-news.h tm-hp300bsd.h tm-altos.h : tm-68k.h
-tm-hp300hpux.h tm-sun2.h tm-3b1.h : tm-68k.h
-xm-news1000.h : xm-news.h
-xm-i386-sv32.h : xm-i386.h
-tm-i386gas.h: tm-i386.h
-xm-sun4os4.h : xm-sparc.h
-tm-sun4os4.h : tm-sparc.h
-
-kdb : $(NTSSTART) $(OBS) $(NTSOBS) ${ADD_DEPS} ${CDEPS}
-       rm -f init.c
-       $(srcdir)/munch ${MUNCH_DEFINE} $(OBS) $(NTSOBS) > init.c
-       $(CC) $(LDFLAGS) -c init.c $(CLIBS) 
-       ld -o kdb $(NTSSTART) $(OBS) $(NTSOBS) init.o $(ADD_FILES) \
-         -lc $(CLIBS)
-
-# Put the proper machine-specific files first.
-# createtags will edit the .o in DEPFILES into .c
-TAGS: ${TAGFILES}
-       $(srcdir)/createtags $(TM_FILE) ${XM_FILE} $(DEPFILES) ${TAGFILES}
-tags: TAGS
-
-# FIXME: Get alldeps.mak up to date, config.gdb none, THEN make gdb.tar.Z!
-gdb.tar.Z: ${TARFILES} ${TARDIRS}
-       rm -f gdb.tar; rm -rf $(DIST)
-       mkdir $(DIST)
-       cd $(DIST) ; for i in ${TARFILES} ; do ln -s ../$$i . ; done
-       cd $(DIST); for i in ${TARDIRS}; do \
-         (mkdir $$i; cd $$i; \
-         ln -s ../../$$i/* .; \
-         rm -rf SCCS CVS.adm RCS); done
-       mkdir $(DIST)/xconfig ${DIST}/tconfig
-       cd $(DIST)/tconfig ; \
-         for i in $(ALLCONFIG) ; do ln -s ../../$$i ../$$i ; done
-       mkdir $(DIST)/vx-share $(DIST)/nindy-share
-       cd $(DIST)/tconfig ; \
-         for i in $(SFILES_SUBDIR) $(ALLDEPFILES_SUBDIR); \
-           do ln -s ../../$$i ../$$i ; done
-       tar chf - $(DIST) | compress >gdb.tar.Z
-       rm -rf $(DIST)
-
-clean:
-       rm -f ${OBS} ${TSOBS} ${NTSOBS} ${ADD_FILES}
-       rm -f init.c init.o version.c
-       rm -f gdb core gdb.tar gdb.tar.Z make.log
-       rm -f gdb[0-9]
-       rm -f gdb.dvi rdl-apps.texinfo gdb-all*
-
-distclean: clean expread.tab.c TAGS
-       rm -f tm.h xm.h config.status
-       rm -f y.output yacc.acts yacc.tmp
-       rm -f ${TESTS} Makefile
-
-realclean: clean
-       rm -f expread.tab.c TAGS
-       rm -f tm.h xm.h config.status
-       rm -f Makefile
-
-rdl-apps.texinfo: ${READLINE_DIR}/inc-readline.texinfo \
-                       ${READLINE_DIR}/inc-history.texinfo
-       echo "@include ${READLINE_DIR}/inc-readline.texinfo" >rdl-apps.texinfo
-       echo "@include ${READLINE_DIR}/inc-history.texinfo" >>rdl-apps.texinfo
-
-gdb-all.texinfo: ${SFILES_DOCDIR}
-       ( cd $(srcdir)/doc; \
-               ${M4} pretex.m4 none.m4 all.m4 gdb.texinfo ) >gdb-all.texinfo
-
-gdb.dvi : gdb-all.texinfo rdl-apps.texinfo
-       TEXINPUTS=${TEXIDIR}:$$TEXINPUTS tex gdb-all.texinfo
-       texindex gdb-all.??
-       TEXINPUTS=${TEXIDIR}:$$TEXINPUTS tex gdb-all.texinfo
-       mv gdb-all.dvi gdb.dvi
-       rm -f gdb-all.?? gdb-all.???
-
-# This should work eventually, but we're using texinfo2, and many makeinfo's 
-# can't cope with all the markup.  In the meantime, we distribute the info
-# files as formatted by the elisp texinfo2 code.
-#gdb.info: gdb-all.texinfo
-#      makeinfo gdb-all.texinfo
-
-# Make copying.c from COPYING
-copying.c : COPYING copying.awk
-       awk -f copying.awk < COPYING > copying.c
-
-version.c : Makefile.dist
-       echo 'char *version = "$(VERSION)";' >version.c
-
-${srcdir}/expread.tab.c : $(srcdir)/expread.y
-       @echo 'Expect 4 shift/reduce conflict.'
-       ${YACC} $(srcdir)/expread.y
-       mv y.tab.c ${srcdir}/expread.tab.c
-
-expread.o : ${srcdir}/expread.tab.c defs.h param.h symtab.h \
-            frame.h expression.h
-       $(CC) -c ${CFLAGS} `echo ${srcdir}/expread.tab.c | sed 's,^\./,,'`
-       mv expread.tab.o expread.o
-
-# dbxread, coffread, mipsread have dependencies on BFD header files.
-dbxread.o: ${srcdir}/dbxread.c
-       ${CC} -c ${CFLAGS} -I$(BFD_DIR) ${srcdir}/dbxread.c
-
-coffread.o: ${srcdir}/coffread.c
-       ${CC} -c ${CFLAGS} -I$(BFD_DIR) ${srcdir}/coffread.c
-
-mipsread.o: ${srcdir}/mipsread.c
-       ${CC} -c ${CFLAGS} -I$(BFD_DIR) ${srcdir}/mipsread.c
-
-# Drag in the files that are in another directory.
-
-xdr_ld.o: ${srcdir}/vx-share/xdr_ld.c
-       ${CC} -c ${CFLAGS} ${srcdir}/vx-share/xdr_ld.c
-
-xdr_ptrace.o: ${srcdir}/vx-share/xdr_ptrace.c
-       ${CC} -c ${CFLAGS} ${srcdir}/vx-share/xdr_ptrace.c
-
-xdr_rdb.o: ${srcdir}/vx-share/xdr_rdb.c
-       ${CC} -c ${CFLAGS} ${srcdir}/vx-share/xdr_rdb.c
-
-xdr_regs.o: ${srcdir}/vx-share/xdr_regs.c
-       ${CC} -c ${CFLAGS} ${srcdir}/vx-share/xdr_regs.c
-
-nindy.o: ${srcdir}/nindy-share/nindy.c
-       ${CC} -c ${CFLAGS} ${srcdir}/nindy-share/nindy.c
-
-Onindy.o: ${srcdir}/nindy-share/Onindy.c
-       ${CC} -c ${CFLAGS} ${srcdir}/nindy-share/Onindy.c
-
-ttybreak.o: ${srcdir}/nindy-share/ttybreak.c
-       ${CC} -c ${CFLAGS} ${srcdir}/nindy-share/ttybreak.c
-
-ttyflush.o: ${srcdir}/nindy-share/ttyflush.c
-       ${CC} -c ${CFLAGS} ${srcdir}/nindy-share/ttyflush.c
-
-tdesc-lib/libdc.o : force_update
-       cd tdesc-lib ; ${MAKE} "SYSV_DEFINE=${SYSV_DEFINE}"
-
-lint: $(LINTFILES)
-       $(LINT) $(INCLUDE_CFLAGS) $(LINTFLAGS) $(LINTFILES)
-
-gdb.cxref: $(SFILES)
-       cxref -I. $(SFILES) >gdb.cxref
-
-force_update :
-
-# When used with GDB, the demangler should never look for leading
-# underscores because GDB strips them off during symbol read-in.  Thus
-# -Dnounderscore.  
-
-cplus-dem.o : cplus-dem.c
-       ${CC} -c ${CFLAGS} -Dnounderscore \
-         `echo ${srcdir}/cplus-dem.c | sed 's,^\./,,'`
diff --git a/gdb/Makefile.sdir b/gdb/Makefile.sdir
deleted file mode 100755 (executable)
index b5fb6b3..0000000
+++ /dev/null
@@ -1 +0,0 @@
-srcdir=.
diff --git a/gdb/Makefile.srcdir b/gdb/Makefile.srcdir
deleted file mode 100755 (executable)
index b5fb6b3..0000000
+++ /dev/null
@@ -1 +0,0 @@
-srcdir=.
diff --git a/gdb/WHATS.NEW b/gdb/WHATS.NEW
deleted file mode 100755 (executable)
index c189965..0000000
+++ /dev/null
@@ -1,596 +0,0 @@
-               What has changed since GDB-3.5?
-               (Organized release by release)
-
-*** Changes in GDB-4.6:
-
- * Better support for C++ function names
-
-GDB now accepts as input the "demangled form" of C++ overloaded function
-names and member function names, and can do command completion on such names
-(using TAB, TAB-TAB, and ESC-?).  The names have to be quoted with a pair of
-single quotes.  Examples are 'func (int, long)' and 'obj::operator==(obj&)'.
-Make use of command completion, it is your friend.
-
-GDB also now accepts a variety of C++ mangled symbol formats.  They are
-the GNU g++ style, the Cfront (ARM) style, and the Lucid (lcc) style.
-You can tell GDB which format to use by doing a 'set demangle-style {gnu,
-lucid, cfront, auto}'.  'gnu' is the default.  Do a 'set demangle-style foo'
-for the list of formats.
-
- * G++ symbol mangling problem
-
-Recent versions of gcc have a bug in how they emit debugging information for
-C++ methods (when using dbx-style stabs).  The file 'gcc.patch' (in this
-directory) can be applied to gcc to fix the problem.  Alternatively, if you
-can't fix gcc, you can #define GCC_MANGLE_BUG when compling gdb/symtab.c. The
-usual symptom is difficulty with setting breakpoints on methods.  GDB complains
-about the method being non-existent.  (We believe that version 2.2.2 of GCC has
-this problem.)
-
- * New 'maintenance' command
-
-All of the commands related to hacking GDB internals have been moved out of
-the main command set, and now live behind the 'maintenance' command.  This
-can also be abbreviated as 'mt'.  The following changes were made:
-
-       dump-me ->              maintenance dump-me
-       info all-breakpoints -> maintenance info breakpoints
-       printmsyms ->           maintenance print msyms
-       printobjfiles ->        maintenance print objfiles
-       printpsyms ->           maintenance print psymbols
-       printsyms ->            maintenance print symbols
-
-The following commands are new:
-
-       maintenance demangle    Call internal GDB demangler routine to
-                               demangle a C++ link name and prints the result.
-       maintenance print type  Print a type chain for a given symbol
-
- * Change to .gdbinit file processing
-
-We now read the $HOME/.gdbinit file before processing the argv arguments
-(e.g. reading symbol files or core files).  This allows global parameters to
-be set, which will apply during the symbol reading.  The ./.gdbinit is still
-read after argv processing.
-
- * New hosts supported
-
-Solaris-2.0 !!!                                sparc-sun-solaris2  or  sun4sol2
-
-Linux support                          i386-unknown-linux  or  linux
-
-We are also including code to support the HP/PA running BSD and HPUX.  This
-is almost guaranteed not to work, as we didn't have time to test or build it
-for this release.  We are including it so that the more adventurous (or
-masochistic) of you can play with it.  We also had major problems with the
-fact that the compiler that we got from HP doesn't support the -g option.
-It costs extra.
-
- * New targets supported
-
-Hitachi H8/300                         h8300-hitachi-hms  or  h8300hms
-
- * More smarts about finding #include files
-
-GDB now remembers the compilation directory for all include files, and for
-all files from which C is generated (like yacc and lex sources).  This
-greatly improves GDB's ability to find yacc/lex sources, and include files,
-especially if you are debugging your program from a directory different from
-the one that contains your sources.
-
-We also fixed a bug which caused difficulty with listing and setting
-breakpoints in include files which contain C code.  (In the past, you had to
-try twice in order to list an include file that you hadn't looked at before.)
-
- * Interesting infernals change
-
-GDB now deals with arbitrary numbers of sections, where the symbols for each
-section must be relocated relative to that section's landing place in the
-target's address space.  This work was needed to support ELF with embedded
-stabs used by Solaris-2.0.
-
- * Bug fixes (of course!)
-
-There have been loads of fixes for the following things:
-       mips, rs6000, 29k/udi, m68k, g++, type handling, elf/dwarf, m88k,
-       i960, stabs, DOS(GO32), procfs, etc...
-
-See the ChangeLog for details.
-
-*** Changes in GDB-4.5:
-
- * New machines supported (host and target)
-
-IBM RS6000 running AIX                 rs6000-ibm-aix  or rs6000
-
-SGI Irix-4.x                           mips-sgi-irix4  or iris4
-
- * New malloc package
-
-GDB now uses a new memory manager called mmalloc, based on gmalloc.
-Mmalloc is capable of handling mutiple heaps of memory.  It is also
-capable of saving a heap to a file, and then mapping it back in later.
-This can be used to greatly speedup the startup of GDB by using a
-pre-parsed symbol table which lives in a mmalloc managed heap.  For
-more details, please read mmalloc/mmalloc.texi.
-
- * info proc
-
-The 'info proc' command (SVR4 only) has been enhanced quite a bit.  See
-'help info proc' for details.
-
- * MIPS ecoff symbol table format
-
-The code that reads MIPS symbol table format is now supported on all hosts.
-Thanks to MIPS for releasing the sym.h and symconst.h files to make this
-possible.
-
- * File name changes for MS-DOS
-
-Many files in the config directories have been renamed to make it easier to
-support GDB on MS-DOSe systems (which have very restrictive file name
-conventions :-( ).  MS-DOSe host support (under DJ Delorie's GO32
-environment) is close to working but has some remaining problems.  Note
-that debugging of DOS programs is not supported, due to limitations
-in the ``operating system'', but it can be used to host cross-debugging.
-
- * Cross byte order fixes
-
-Many fixes have been made to support cross debugging of Sparc and MIPS
-targets from hosts whose byte order differs.
-
- * New -mapped and -readnow options
-
-If memory-mapped files are available on your system through the 'mmap'
-system call, you can use the -mapped option on the `file' or
-`symbol-file' commands to cause GDB to write the symbols from your
-program into a reusable file.  If the program you are debugging is
-called `/path/fred', the mapped symbol file will be `./fred.syms'.
-Future GDB debugging sessions will notice the presence of this file,
-and will quickly map in symbol information from it, rather than reading
-the symbol table from the executable program.  Using the '-mapped'
-option in a GDB `file' or `symbol-file' command has the same effect as
-starting GDB with the '-mapped' command-line option.
-
-You can cause GDB to read the entire symbol table immediately by using
-the '-readnow' option with any of the commands that load symbol table
-information (or on the GDB command line).  This makes the command
-slower, but makes future operations faster.
-
-The -mapped and -readnow options are typically combined in order to
-build a `fred.syms' file that contains complete symbol information.
-A simple GDB invocation to do nothing but build a `.syms' file for future
-use is:
-
-       gdb -batch -nx -mapped -readnow programname
-
-The `.syms' file is specific to the host machine on which GDB is run.
-It holds an exact image of GDB's internal symbol table.  It cannot be
-shared across multiple host platforms.
-
- * longjmp() handling
-
-GDB is now capable of stepping and nexting over longjmp(), _longjmp(), and
-siglongjmp() without losing control.  This feature has not yet been ported to
-all systems.  It currently works on many 386 platforms, all MIPS-based
-platforms (SGI, DECstation, etc), and Sun3/4.
-
- * Solaris 2.0
-
-Preliminary work has been put in to support the new Solaris OS from Sun.  At
-this time, it can control and debug processes, but it is not capable of
-reading symbols.
-
- * Bug fixes
-
-As always, many many bug fixes.  The major areas were with g++, and mipsread.
-People using the MIPS-based platforms should experience fewer mysterious
-crashes and trashed symbol tables.
-
-*** Changes in GDB-4.4:
-
- * New machines supported (host and target)
-
-SCO Unix on i386 IBM PC clones         i386-sco-sysv   or  i386sco
-       (except core files)
-BSD Reno on Vax                                vax-dec-bsd
-Ultrix on Vax                          vax-dec-ultrix
-
- * New machines supported (target)
-
-AMD 29000 embedded, using EBMON                a29k-none-none
-
- * C++ support
-
-GDB continues to improve its handling of C++.  `References' work better.
-The demangler has also been improved, and now deals with symbols mangled as
-per the Annotated C++ Reference Guide.
-
-GDB also now handles `stabs' symbol information embedded in MIPS
-`ecoff' symbol tables.  Since the ecoff format was not easily
-extensible to handle new languages such as C++, this appeared to be a
-good way to put C++ debugging info into MIPS binaries.  This option
-will be supported in the GNU C compiler, version 2, when it is
-released.
-
- * New features for SVR4
-
-GDB now handles SVR4 shared libraries, in the same fashion as SunOS
-shared libraries.  Debugging dynamically linked programs should present
-only minor differences from debugging statically linked programs.
-
-The `info proc' command will print out information about any process
-on an SVR4 system (including the one you are debugging).  At the moment,
-it prints the address mappings of the process.
-
-If you bring up GDB on another SVR4 system, please send mail to
-bug-gdb@prep.ai.mit.edu to let us know what changes were reqired (if any).
-
- * Better dynamic linking support in SunOS
-
-Reading symbols from shared libraries which contain debugging symbols
-now works properly.  However, there remain issues such as automatic
-skipping of `transfer vector' code during function calls, which
-make it harder to debug code in a shared library, than to debug the
-same code linked statically.
-
- * New Getopt
-
-GDB is now using the latest `getopt' routines from the FSF.  This
-version accepts the -- prefix for options with long names.  GDB will
-continue to accept the old forms (-option and +option) as well.
-Various single letter abbreviations for options have been explicity
-added to the option table so that they won't get overshadowed in the
-future by other options that begin with the same letter.
-
- * Bugs fixed
-
-The `cleanup_undefined_types' bug that many of you noticed has been squashed.
-Many assorted bugs have been handled.  Many more remain to be handled.
-See the various ChangeLog files (primarily in gdb and bfd) for details.
-
-
-*** Changes in GDB-4.3:
-
- * New machines supported (host and target)
-
-Amiga 3000 running Amix                        m68k-cbm-svr4   or  amix
-NCR 3000 386 running SVR4              i386-ncr-svr4   or  ncr3000
-Motorola Delta 88000 running Sys V     m88k-motorola-sysv  or  delta88
-
- * Almost SCO Unix support
-
-We had hoped to support:
-SCO Unix on i386 IBM PC clones         i386-sco-sysv   or  i386sco
-(except for core file support), but we discovered very late in the release
-that it has problems with process groups that render gdb unusable.  Sorry
-about that.  I encourage people to fix it and post the fixes.
-
- * Preliminary ELF and DWARF support
-
-GDB can read ELF object files on System V Release 4, and can handle
-debugging records for C, in DWARF format, in ELF files.  This support
-is preliminary.  If you bring up GDB on another SVR4 system, please
-send mail to bug-gdb@prep.ai.mit.edu to let us know what changes were
-reqired (if any).
-
- * New Readline
-
-GDB now uses the latest `readline' library.  One user-visible change
-is that two tabs will list possible command completions, which previously
-required typing M-? (meta-question mark, or ESC ?).
-
- * Bugs fixed
-
-The `stepi' bug that many of you noticed has been squashed.
-Many bugs in C++ have been handled.  Many more remain to be handled.
-See the various ChangeLog files (primarily in gdb and bfd) for details.
-
- * State of the MIPS world (in case you wondered):
-
-GDB can understand the symbol tables emitted by the compilers
-supplied by most vendors of MIPS-based machines, including DEC.  These
-symbol tables are in a format that essentially nobody else uses.
-
-Some versions of gcc come with an assembler post-processor called
-mips-tfile.  This program is required if you want to do source-level
-debugging of gcc-compiled programs.  I believe FSF does not ship
-mips-tfile with gcc version 1, but it will eventually come with gcc
-version 2.
-
-Debugging of g++ output remains a problem.  g++ version 1.xx does not
-really support it at all.  (If you're lucky, you should be able to get
-line numbers and stack traces to work, but no parameters or local
-variables.)  With some work it should be possible to improve the
-situation somewhat.
-
-When gcc version 2 is released, you will have somewhat better luck.
-However, even then you will get confusing results for inheritance and
-methods.
-
-We will eventually provide full debugging of g++ output on
-DECstations.  This will probably involve some kind of stabs-in-ecoff
-encapulation, but the details have not been worked out yet.
-
-
-*** Changes in GDB-4.2:
-
- *  Improved configuration
-
-Only one copy of `configure' exists now, and it is not self-modifying.
-Porting BFD is simpler.  
-
- *  Stepping improved
-
-The `step' and `next' commands now only stop at the first instruction
-of a source line.  This prevents the multiple stops that used to occur
-in switch statements, for-loops, etc.  `Step' continues to stop if a
-function that has debugging information is called within the line.
-
- *  Bug fixing
-
-Lots of small bugs fixed.  More remain.
-
- *  New host supported (not target)
-
-Intel 386 PC clone running Mach                i386-none-mach
-
-
-*** Changes in GDB-4.1:
-
- *  Multiple source language support
-
-GDB now has internal scaffolding to handle several source languages.
-It determines the type of each source file from its filename extension,
-and will switch expression parsing and number formatting to match the
-language of the function in the currently selected stack frame.
-You can also specifically set the language to be used, with
-`set language c' or `set language modula-2'.
-
- *  GDB and Modula-2
-
-GDB now has preliminary support for the GNU Modula-2 compiler,
-currently under development at the State University of New York at
-Buffalo.  Development of both GDB and the GNU Modula-2 compiler will
-continue through the fall of 1991 and into 1992.
-
-Other Modula-2 compilers are currently not supported, and attempting to
-debug programs compiled with them will likely result in an error as the
-symbol table is read.  Feel free to work on it, though!
-
-There are hooks in GDB for strict type checking and range checking,
-in the `Modula-2 philosophy', but they do not currently work.
-
- * set write on/off
-
-GDB can now write to executable and core files (e.g. patch
-a variable's value).   You must turn this switch on, specify
-the file ("exec foo" or "core foo"), *then* modify it, e.g.
-by assigning a new value to a variable.  Modifications take
-effect immediately.
-
- * Automatic SunOS shared library reading
-
-When you run your program, GDB automatically determines where its
-shared libraries (if any) have been loaded, and reads their symbols.
-The `share' command is no longer needed.  This also works when
-examining core files.
-
- * set listsize
-
-You can specify the number of lines that the `list' command shows.
-The default is 10.
-
- * New machines supported (host and target)
-
-SGI Iris (MIPS) running Irix V3:       mips-sgi-irix   or  iris
-Sony NEWS (68K) running NEWSOS 3.x:    m68k-sony-sysv  or  news
-Ultracomputer (29K) running Sym1:      a29k-nyu-sym1   or  ultra3
-
- * New hosts supported (not targets)
-
-IBM RT/PC:                             romp-ibm-aix    or  rtpc
-
- * New targets supported (not hosts)
-
-AMD 29000 embedded with COFF           a29k-none-coff
-AMD 29000 embedded with a.out          a29k-none-aout
-Ultracomputer remote kernel debug      a29k-nyu-kern
-
- * New remote interfaces
-
-AMD 29000 Adapt
-AMD 29000 Minimon
-
-
-*** Changes in GDB-4.0:
-
- *  New Facilities
-
-Wide output is wrapped at good places to make the output more readable.
-
-Gdb now supports cross-debugging from a host machine of one type to a
-target machine of another type.  Communication with the target system
-is over serial lines.  The ``target'' command handles connecting to the
-remote system; the ``load'' command will download a program into the
-remote system.  Serial stubs for the m68k and i386 are provided.  Gdb
-also supports debugging of realtime processes running under VxWorks,
-using SunRPC Remote Procedure Calls over TCP/IP to talk to a debugger
-stub on the target system.
-
-New CPUs supported include the AMD 29000 and Intel 960.
-
-GDB now reads object files and symbol tables via a ``binary file'' 
-library, which allows a single copy of GDB to debug programs of multiple
-object file types such as a.out and coff.
-
-There is now a GDB reference card in "doc/refcard.tex".  (Make targets
-refcard.dvi and refcard.ps are available to format it).
-
-
- *  Control-Variable user interface simplified
-
-All variables that control the operation of the debugger can be set
-by the ``set'' command, and displayed by the ``show'' command.
-
-For example, ``set prompt new-gdb=>'' will change your prompt to new-gdb=>.
-``Show prompt'' produces the response:
-Gdb's prompt is new-gdb=>.
-
-What follows are the NEW set commands.  The command ``help set'' will
-print a complete list of old and new set commands.  ``help set FOO''
-will give a longer description of the variable FOO.  ``show'' will show
-all of the variable descriptions and their current settings.
-
-confirm on/off:  Enables warning questions for operations that are
-                hard to recover from, e.g. rerunning the program while
-                it is already running.  Default is ON.
-
-editing on/off:  Enables EMACS style command line editing 
-                 of input.  Previous lines can be recalled with 
-                control-P, the current line can be edited with control-B,
-                you can search for commands with control-R, etc.
-                Default is ON.
-
-history filename NAME:  NAME is where the gdb command history 
-                       will be stored.  The default is .gdb_history,
-                       or the value of the environment variable
-                       GDBHISTFILE.
-
-history size N:  The size, in commands, of the command history.  The 
-                default is 256, or the value of the environment variable
-                HISTSIZE.
-
-history save on/off: If this value is set to ON, the history file will
-                     be saved after exiting gdb.  If set to OFF, the 
-                     file will not be saved.  The default is OFF.
-
-history expansion on/off: If this value is set to ON, then csh-like 
-                         history expansion will be performed  on 
-                         command line input.  The default is OFF.
-
-radix N:  Sets the default radix for input and output.  It can be set
-         to 8, 10, or 16.  Note that the argument to "radix" is interpreted
-         in the current radix, so "set radix 10" is always a no-op.
-
-height N: This integer value is the number of lines on a page. Default
-          is 24, the current `stty rows'' setting, or the ``li#''
-         setting from the termcap entry matching the environment
-         variable TERM.
-
-width N:  This integer value is the number of characters on a line.
-         Default is 80, the current `stty cols'' setting, or the ``co#''
-         setting from the termcap entry matching the environment
-         variable TERM.
-
-Note: ``set screensize'' is obsolete. Use ``set height'' and
-``set width'' instead.
-
-print address on/off:  Print memory addresses in various command displays,
-                     such as stack traces and structure values.  Gdb looks
-                     more ``symbolic'' if you turn this off; it looks more
-                     ``machine level'' with it on.  Default is ON.
-
-print array on/off:  Prettyprint arrays.  New convenient format!  Default 
-                    is OFF.
-
-print demangle on/off:   Print C++ symbols in "source" form if on,
-                       "raw" form if off.
-
-print asm-demangle on/off:  Same, for assembler level printouts
-                       like instructions.
-
-print vtbl on/off:  Prettyprint C++ virtual function tables.  Default is OFF.
-
-
- *  Support for Epoch Environment.
-
-The epoch environment is a version of Emacs v18 with windowing.  One
-new command, ``inspect'', is identical to ``print'', except that if you
-are running in the epoch environment, the value is printed in its own
-window.
-
-
- *  Support for Shared Libraries
-
-GDB can now debug programs and core files that use SunOS shared libraries.
-Symbols from a shared library cannot be referenced
-before the shared library has been linked with the program (this
-happens after you type ``run'' and before the function main() is entered).
-At any time after this linking (including when examining core files
-from dynamically linked programs), gdb reads the symbols from each
-shared library when you type the ``sharedlibrary'' command.
-It can be abbreviated ``share''.
-
-sharedlibrary REGEXP:  Load shared object library symbols for files 
-                       matching a unix regular expression.  No argument
-                      indicates to load symbols for all shared libraries.
-
-info sharedlibrary:  Status of loaded shared libraries.
-
-
- *  Watchpoints
-
-A watchpoint stops execution of a program whenever the value of an
-expression changes.  Checking for this slows down execution
-tremendously whenever you are in the scope of the expression, but is
-quite useful for catching tough ``bit-spreader'' or pointer misuse
-problems.  Some machines such as the 386 have hardware for doing this
-more quickly, and future versions of gdb will use this hardware.
-
-watch EXP:  Set a watchpoint (breakpoint) for an expression.
-
-info watchpoints:  Information about your watchpoints.
-
-delete N:   Deletes watchpoint number N (same as breakpoints).
-disable N:  Temporarily turns off watchpoint number N (same as breakpoints).
-enable N:   Re-enables watchpoint number N (same as breakpoints).
-
-
- *  C++ multiple inheritance
-
-When used with a GCC version 2 compiler, GDB supports multiple inheritance
-for C++ programs.
-
- *  C++ exception handling
-
-Gdb now supports limited C++ exception handling.  Besides the existing
-ability to breakpoint on an exception handler, gdb can breakpoint on
-the raising of an exception (before the stack is peeled back to the
-handler's context).
-
-catch FOO:  If there is a FOO exception handler in the dynamic scope,
-           set a breakpoint to catch exceptions which may be raised there.
-           Multiple exceptions (``catch foo bar baz'') may be caught.
-
-info catch:  Lists all exceptions which may be caught in the
-             current stack frame.
-
-
- *  Minor command changes
-
-The command ``call func (arg, arg, ...)'' now acts like the print
-command, except it does not print or save a value if the function's result
-is void.  This is similar to dbx usage.
-
-The ``up'' and ``down'' commands now always print the frame they end up
-at; ``up-silently'' and `down-silently'' can be used in scripts to change
-frames without printing.
-
- *  New directory command
-
-'dir' now adds directories to the FRONT of the source search path.
-The path starts off empty.  Source files that contain debug information
-about the directory in which they were compiled can be found even
-with an empty path; Sun CC and GCC include this information.  If GDB can't
-find your source file in the current directory, type "dir .".
-
- * Configuring GDB for compilation
-
-For normal use, type ``./configure host''.  See README or gdb.texinfo
-for more details.
-
-GDB now handles cross debugging.  If you are remotely debugging between 
-two different machines, type ``./configure host -target=targ''.
-Host is the machine where GDB will run; targ is the machine
-where the program that you are debugging will run.
index d81cbe8..e69de29 100644 (file)
@@ -1,158 +0,0 @@
-/* Host-dependent code for Apollo-68ksfor GDB, the GNU debugger.
-   Copyright 1986, 1987, 1989, 1991 Free Software Foundation, Inc.
-
-This file is part of GDB.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-#include "defs.h"
-#include "inferior.h"
-#include "gdbcore.h"
-
-extern int errno;
-
-#if defined (GDB_TARGET_IS_SUN3)
-/* All of this stuff is only relevant if both host and target are sun3.  */
-void
-fetch_inferior_registers ()
-{
-  struct regs inferior_registers;
-#ifdef FP0_REGNUM
-  struct fp_status inferior_fp_registers;
-#endif
-  extern char registers[];
-
-  registers_fetched ();
-  
-  ptrace (PTRACE_GETREGS, inferior_pid,
-         (PTRACE_ARG3_TYPE) &inferior_registers, 0);
-#ifdef FP0_REGNUM
-  ptrace (PTRACE_GETFPREGS, inferior_pid,
-         (PTRACE_ARG3_TYPE) &inferior_fp_registers, 0);
-#endif 
-  
-  bcopy (&inferior_registers, registers, 16 * 4);
-#ifdef FP0_REGNUM
-  bcopy (&inferior_fp_registers, &registers[REGISTER_BYTE (FP0_REGNUM)],
-        sizeof inferior_fp_registers.fps_regs);
-#endif 
-  *(int *)&registers[REGISTER_BYTE (PS_REGNUM)] = inferior_registers.r_ps;
-  *(int *)&registers[REGISTER_BYTE (PC_REGNUM)] = inferior_registers.r_pc;
-#ifdef FP0_REGNUM
-  bcopy (&inferior_fp_registers.fps_control,
-        &registers[REGISTER_BYTE (FPC_REGNUM)],
-        sizeof inferior_fp_registers - sizeof inferior_fp_registers.fps_regs);
-#endif 
-}
-
-/* Store our register values back into the inferior.
-   If REGNO is -1, do this for all registers.
-   Otherwise, REGNO specifies which register (so we can save time).  */
-
-void
-store_inferior_registers (regno)
-     int regno;
-{
-  struct regs inferior_registers;
-#ifdef FP0_REGNUM
-  struct fp_status inferior_fp_registers;
-#endif
-  extern char registers[];
-
-  bcopy (registers, &inferior_registers, 16 * 4);
-#ifdef FP0_REGNUM
-  bcopy (&registers[REGISTER_BYTE (FP0_REGNUM)], &inferior_fp_registers,
-        sizeof inferior_fp_registers.fps_regs);
-#endif
-  inferior_registers.r_ps = *(int *)&registers[REGISTER_BYTE (PS_REGNUM)];
-  inferior_registers.r_pc = *(int *)&registers[REGISTER_BYTE (PC_REGNUM)];
-
-#ifdef FP0_REGNUM
-  bcopy (&registers[REGISTER_BYTE (FPC_REGNUM)],
-        &inferior_fp_registers.fps_control,
-        sizeof inferior_fp_registers - sizeof inferior_fp_registers.fps_regs);
-#endif
-
-  ptrace (PTRACE_SETREGS, inferior_pid,
-         (PTRACE_ARG3_TYPE) &inferior_registers, 0);
-#if FP0_REGNUM
-  ptrace (PTRACE_SETFPREGS, inferior_pid,
-         (PTRACE_ARG3_TYPE) &inferior_fp_registers, 0);
-#endif
-}
-
-/* Machine-dependent code for pulling registers out of a Sun-3 core file. */
-
-void
-fetch_core_registers (core_reg_sect, core_reg_size, which)
-     char *core_reg_sect;
-     unsigned core_reg_size;
-     int which;
-{
-  extern char registers[];
-  struct regs *regs = (struct regs *) core_reg_sect;
-
-  if (which == 0) {
-    if (core_reg_size < sizeof (struct regs))
-      error ("Can't find registers in core file");
-
-    bcopy ((char *)regs, registers, 16 * 4);
-    supply_register (PS_REGNUM, &regs->r_ps);
-    supply_register (PC_REGNUM, &regs->r_pc);
-
-  } else if (which == 2) {
-
-#define fpustruct  ((struct fpu *) core_reg_sect)
-
-    if (core_reg_size >= sizeof (struct fpu))
-      {
-#ifdef FP0_REGNUM
-       bcopy (fpustruct->f_fpstatus.fps_regs,
-             &registers[REGISTER_BYTE (FP0_REGNUM)],
-             sizeof fpustruct->f_fpstatus.fps_regs);
-       bcopy (&fpustruct->f_fpstatus.fps_control,
-             &registers[REGISTER_BYTE (FPC_REGNUM)],
-             sizeof fpustruct->f_fpstatus - 
-               sizeof fpustruct->f_fpstatus.fps_regs);
-#endif
-      }
-    else
-      fprintf (stderr, "Couldn't read float regs from core file\n");
-  }
-}
-#else /* Not sun3 target.  */
-/* These functions shouldn't be called when we're cross-debugging.  */
-
-void
-fetch_inferior_registers ()
-{
-}
-
-/* ARGSUSED */
-void
-store_inferior_registers (regno)
-     int regno;
-{
-}
-
-/* ARGSUSED */
-void
-fetch_core_registers (core_reg_sect, core_reg_size, which)
-     char *core_reg_sect;
-     unsigned core_reg_size;
-     int which;
-{
-}
-#endif /* Not sun3 target.  */
diff --git a/gdb/ansidecl.h b/gdb/ansidecl.h
deleted file mode 100755 (executable)
index aecdb5e..0000000
+++ /dev/null
@@ -1,93 +0,0 @@
-/* Copyright (C) 1989 Free Software Foundation, Inc.
-This file is part of the GNU C Library.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-/* ANSI and traditional C compatibility macros
-
-   ANSI C is assumed if __STDC__ is #defined.
-
-       Macros
-               PTR             - Generic pointer type
-               LONG_DOUBLE     - `long double' type
-               CONST           - `const' keyword
-               VOLATILE        - `volatile' keyword
-               SIGNED          - `signed' keyword
-               PTRCONST        - Generic const pointer (void *const)
-
-       EXFUN(name, prototype)          - declare external function NAME
-                                         with prototype PROTOTYPE
-       DEFUN(name, arglist, args)      - define function NAME with
-                                         args ARGLIST of types in ARGS
-       DEFUN_VOID(name)                - define function NAME with no args
-       AND                             - argument separator for ARGS
-       NOARGS                          - null arglist
-       DOTS                            - `...' in args
-
-    For example:
-       extern int EXFUN(printf, (CONST char *format DOTS));
-       int DEFUN(fprintf, (stream, format),
-                 FILE *stream AND CONST char *format DOTS) { ... }
-       void DEFUN_VOID(abort) { ... }
-*/
-
-#ifndef        _ANSIDECL_H
-
-#define        _ANSIDECL_H     1
-
-
-/* Every source file includes this file,
-   so they will all get the switch for lint.  */
-/* LINTLIBRARY */
-
-
-#ifdef __STDC__
-
-#define        PTR             void *
-#define        PTRCONST        void *CONST
-#define        LONG_DOUBLE     long double
-
-#define        AND             ,
-#define        NOARGS          void
-#define        CONST           const
-#define        VOLATILE        volatile
-#define        SIGNED          signed
-#define        DOTS            , ...
-
-#define        EXFUN(name, proto)              name proto
-#define        DEFUN(name, arglist, args)      name(args)
-#define        DEFUN_VOID(name)                name(NOARGS)
-
-#else  /* Not ANSI C.  */
-
-#define        PTR             char *
-#define        PTRCONST        PTR
-#define        LONG_DOUBLE     double
-
-#define        AND             ;
-#define        NOARGS
-#define        CONST
-#define        VOLATILE
-#define        SIGNED
-#define        DOTS
-
-#define        EXFUN(name, proto)              name()
-#define        DEFUN(name, arglist, args)      name arglist args;
-#define        DEFUN_VOID(name)                name()
-
-#endif /* ANSI C.  */
-
-
-#endif /* ansidecl.h   */
diff --git a/gdb/arm-opcode.h b/gdb/arm-opcode.h
deleted file mode 100755 (executable)
index d27a54e..0000000
+++ /dev/null
@@ -1,294 +0,0 @@
-/* ARM opcode list.
-   Copyright (C) 1989, Free Software Foundation, Inc.
-
-This file is part of GDB and GAS.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-/* types of instruction (encoded in bits 26 and 27 of the instruction) */
-
-#define TYPE_ARITHMETIC                0
-#define TYPE_LDR_STR           1
-#define TYPE_BLOCK_BRANCH      2
-#define TYPE_SWI               3
-
-/* bit 25 decides whether an instruction is a block move or a branch */
-#define SUBTYPE_BLOCK          0
-#define SUBTYPE_BRANCH         1
-
-/* codes to distinguish the arithmetic instructions */
-
-#define OPCODE_AND     0
-#define OPCODE_EOR     1
-#define OPCODE_SUB     2
-#define OPCODE_RSB     3
-#define OPCODE_ADD     4
-#define OPCODE_ADC     5
-#define OPCODE_SBC     6
-#define OPCODE_RSC     7
-#define OPCODE_TST     8
-#define OPCODE_TEQ     9
-#define OPCODE_CMP     10
-#define OPCODE_CMN     11
-#define OPCODE_ORR     12
-#define OPCODE_MOV     13
-#define OPCODE_BIC     14
-#define OPCODE_MVN     15
-
-/* condition codes */
-
-#define COND_EQ                0
-#define COND_NE                1
-#define COND_CS                2
-#define COND_CC                3
-#define COND_MI                4
-#define COND_PL                5
-#define COND_VS                6
-#define COND_VC                7
-#define COND_HI                8
-#define COND_LS                9
-#define COND_GE                10
-#define COND_LT                11
-#define COND_GT                12
-#define COND_LE                13
-#define COND_AL                14
-#define COND_NV                15
-
-/* Describes the format of an ARM machine instruction */
-
-struct generic_fmt {
-    unsigned rest      :25;    /* the rest of the instruction */
-    unsigned subtype   :1;     /* used to decide between block and branch */
-    unsigned type      :2;     /* one of TYPE_* */
-    unsigned cond      :4;     /* one of COND_* defined above */
-};
-
-struct arith_fmt {
-    unsigned operand2  :12;    /* #nn or rn or rn shift #m or rn shift rm */
-    unsigned dest      :4;     /* place where the answer goes */
-    unsigned operand1  :4;     /* first operand to instruction */
-    unsigned set       :1;     /* == 1 means set processor flags */
-    unsigned opcode    :4;     /* one of OPCODE_* defined above */
-    unsigned immed     :1;     /* operand2 is an immediate value */
-    unsigned type      :2;     /* == TYPE_ARITHMETIC */
-    unsigned cond      :4;     /* one of COND_* defined above */
-};
-
-struct ldr_str_fmt {
-    unsigned offset    :12;    /* #nn or rn or rn shift #m */
-    unsigned reg       :4;     /* destination for LDR, source for STR */
-    unsigned base      :4;     /* base register */
-    unsigned is_load   :1;     /* == 1 for LDR */
-    unsigned writeback :1;     /* == 1 means write back (base+offset) into base */
-    unsigned byte      :1;     /* == 1 means byte access else word */
-    unsigned up                :1;     /* == 1 means add offset else subtract it */
-    unsigned pre_index :1;     /* == 1 means [a,b] form else [a],b form */
-    unsigned immed     :1;     /* == 0 means immediate offset */
-    unsigned type      :2;     /* == TYPE_LDR_STR */
-    unsigned cond      :4;     /* one of COND_* defined above */
-};
-
-struct block_fmt {
-    unsigned mask      :16;    /* register mask */
-    unsigned base      :4;     /* register used as base of move */
-    unsigned is_load   :1;     /* == 1 for LDM */
-    unsigned writeback :1;     /* == 1 means update base after move */
-    unsigned set       :1;     /* == 1 means set flags in pc if included in mask */
-    unsigned increment :1;     /* == 1 means increment base register */
-    unsigned before    :1;     /* == 1 means inc/dec before each move */
-    unsigned is_block  :1;     /* == SUBTYPE_BLOCK */
-    unsigned type      :2;     /* == TYPE_BLOCK_BRANCH */
-    unsigned cond      :4;     /* one of COND_* defined above */
-};
-
-struct branch_fmt {
-    unsigned dest      :24;    /* destination of the branch */
-    unsigned link      :1;     /* branch with link (function call) */
-    unsigned is_branch :1;     /* == SUBTYPE_BRANCH */
-    unsigned type      :2;     /* == TYPE_BLOCK_BRANCH */
-    unsigned cond      :4;     /* one of COND_* defined above */
-};
-
-#define ROUND_N                0
-#define ROUND_P                1
-#define ROUND_M                2
-#define ROUND_Z                3
-
-#define FLOAT2_MVF     0
-#define FLOAT2_MNF     1
-#define FLOAT2_ABS     2
-#define FLOAT2_RND     3
-#define FLOAT2_SQT     4
-#define FLOAT2_LOG     5
-#define FLOAT2_LGN     6
-#define FLOAT2_EXP     7
-#define FLOAT2_SIN     8
-#define FLOAT2_COS     9
-#define FLOAT2_TAN     10
-#define FLOAT2_ASN     11
-#define FLOAT2_ACS     12
-#define FLOAT2_ATN     13
-
-#define FLOAT3_ADF     0
-#define FLOAT3_MUF     1
-#define FLOAT3_SUF     2
-#define FLOAT3_RSF     3
-#define FLOAT3_DVF     4
-#define FLOAT3_RDF     5
-#define FLOAT3_POW     6
-#define FLOAT3_RPW     7
-#define FLOAT3_RMF     8
-#define FLOAT3_FML     9
-#define FLOAT3_FDV     10
-#define FLOAT3_FRD     11
-#define FLOAT3_POL     12
-
-struct float2_fmt {
-    unsigned operand2  :3;     /* second operand */
-    unsigned immed     :1;     /* == 1 if second operand is a constant */
-    unsigned pad1      :1;     /* == 0 */
-    unsigned rounding  :2;     /* ROUND_* */
-    unsigned is_double :1;     /* == 1 if precision is double (only if not extended) */
-    unsigned pad2      :4;     /* == 1 */
-    unsigned dest      :3;     /* destination */
-    unsigned is_2_op   :1;     /* == 1 if 2 operand ins */
-    unsigned operand1  :3;     /* first operand (only of is_2_op == 0) */
-    unsigned is_extended :1;   /* == 1 if precision is extended */
-    unsigned opcode    :4;     /* FLOAT2_* or FLOAT3_* depending on is_2_op */
-    unsigned must_be_2 :2;     /* == 2 */
-    unsigned type      :2;     /* == TYPE_SWI */
-    unsigned cond      :4;     /* COND_* */
-};
-
-struct swi_fmt {
-    unsigned argument  :24;    /* argument to SWI (syscall number) */
-    unsigned must_be_3 :2;     /* == 3 */
-    unsigned type      :2;     /* == TYPE_SWI */
-    unsigned cond      :4;     /* one of COND_* defined above */
-};
-
-union insn_fmt {
-    struct generic_fmt generic;
-    struct arith_fmt   arith;
-    struct ldr_str_fmt ldr_str;
-    struct block_fmt   block;
-    struct branch_fmt  branch;
-    struct swi_fmt     swi;
-    unsigned long      ins;
-};
-
-struct opcode {
-    unsigned long value, mask; /* recognise instruction if (op&mask)==value */
-    char *assembler;           /* how to disassemble this instruction */
-};
-
-/* format of the assembler string :
-   
-   %%                  %
-   %<bitfield>d                print the bitfield in decimal
-   %<bitfield>x                print the bitfield in hex
-   %<bitfield>r                print as an ARM register
-   %<bitfield>f                print a floating point constant if >7 else an fp register
-   %c                  print condition code (always bits 28-31)
-   %P                  print floating point precision in arithmetic insn
-   %Q                  print floating point precision in ldf/stf insn
-   %R                  print floating point rounding mode
-   %<bitnum>'c         print specified char iff bit is one
-   %<bitnum>`c         print specified char iff bit is zero
-   %<bitnum>?ab                print a if bit is one else print b
-   %p                  print 'p' iff bits 12-15 are 15
-   %o                  print operand2 (immediate or register + shift)
-   %a                  print address for ldr/str instruction
-   %b                  print branch destination
-   %A                  print address for ldc/stc/ldf/stf instruction
-   %m                  print register mask for ldm/stm instruction
-*/
-
-static struct opcode opcodes[] = {
-    /* ARM instructions */
-    0x00000090, 0x0fe000f0, "mul%20's %12-15r, %16-19r, %0-3r",
-    0x00200090, 0x0fe000f0, "mla%20's %12-15r, %16-19r, %0-3r, %8-11r",
-    0x00000000, 0x0de00000, "and%c%20's %12-15r, %16-19r, %o",
-    0x00200000, 0x0de00000, "eor%c%20's %12-15r, %16-19r, %o",
-    0x00400000, 0x0de00000, "sub%c%20's %12-15r, %16-19r, %o",
-    0x00600000, 0x0de00000, "rsb%c%20's %12-15r, %16-19r, %o",
-    0x00800000, 0x0de00000, "add%c%20's %12-15r, %16-19r, %o",
-    0x00a00000, 0x0de00000, "adc%c%20's %12-15r, %16-19r, %o",
-    0x00c00000, 0x0de00000, "sbc%c%20's %12-15r, %16-19r, %o",
-    0x00e00000, 0x0de00000, "rsc%c%20's %12-15r, %16-19r, %o",
-    0x01000000, 0x0de00000, "tst%c%p %16-19r, %o",
-    0x01200000, 0x0de00000, "teq%c%p %16-19r, %o",
-    0x01400000, 0x0de00000, "cmp%c%p %16-19r, %o",
-    0x01600000, 0x0de00000, "cmn%c%p %16-19r, %o",
-    0x01800000, 0x0de00000, "orr%c%20's %12-15r, %16-19r, %o",
-    0x01a00000, 0x0de00000, "mov%c%20's %12-15r, %o",
-    0x01c00000, 0x0de00000, "bic%c%20's %12-15r, %16-19r, %o",
-    0x01e00000, 0x0de00000, "mvn%c%20's %12-15r, %o",
-    0x04000000, 0x0c100000, "str%c%22'b %12-15r, %a",
-    0x04100000, 0x0c100000, "ldr%c%22'b %12-15r, %a",
-    0x08000000, 0x0e100000, "stm%c%23?id%24?ba %16-19r%22`!, %m",
-    0x08100000, 0x0e100000, "ldm%c%23?id%24?ba %16-19r%22`!, %m%22'^",
-    0x0a000000, 0x0e000000, "b%c%24'l %b",
-    0x0f000000, 0x0f000000, "swi%c %0-23x",
-    /* Floating point coprocessor instructions */
-    0x0e000100, 0x0ff08f10, "adf%c%P%R %12-14f, %16-18f, %0-3f",
-    0x0e100100, 0x0ff08f10, "muf%c%P%R %12-14f, %16-18f, %0-3f",
-    0x0e200100, 0x0ff08f10, "suf%c%P%R %12-14f, %16-18f, %0-3f",
-    0x0e300100, 0x0ff08f10, "rsf%c%P%R %12-14f, %16-18f, %0-3f",
-    0x0e400100, 0x0ff08f10, "dvf%c%P%R %12-14f, %16-18f, %0-3f",
-    0x0e500100, 0x0ff08f10, "rdf%c%P%R %12-14f, %16-18f, %0-3f",
-    0x0e600100, 0x0ff08f10, "pow%c%P%R %12-14f, %16-18f, %0-3f",
-    0x0e700100, 0x0ff08f10, "rpw%c%P%R %12-14f, %16-18f, %0-3f",
-    0x0e800100, 0x0ff08f10, "rmf%c%P%R %12-14f, %16-18f, %0-3f",
-    0x0e900100, 0x0ff08f10, "fml%c%P%R %12-14f, %16-18f, %0-3f",
-    0x0ea00100, 0x0ff08f10, "fdv%c%P%R %12-14f, %16-18f, %0-3f",
-    0x0eb00100, 0x0ff08f10, "frd%c%P%R %12-14f, %16-18f, %0-3f",
-    0x0ec00100, 0x0ff08f10, "pol%c%P%R %12-14f, %16-18f, %0-3f",
-    0x0e008100, 0x0ff08f10, "mvf%c%P%R %12-14f, %0-3f",
-    0x0e108100, 0x0ff08f10, "mnf%c%P%R %12-14f, %0-3f",
-    0x0e208100, 0x0ff08f10, "abs%c%P%R %12-14f, %0-3f",
-    0x0e308100, 0x0ff08f10, "rnd%c%P%R %12-14f, %0-3f",
-    0x0e408100, 0x0ff08f10, "sqt%c%P%R %12-14f, %0-3f",
-    0x0e508100, 0x0ff08f10, "log%c%P%R %12-14f, %0-3f",
-    0x0e608100, 0x0ff08f10, "lgn%c%P%R %12-14f, %0-3f",
-    0x0e708100, 0x0ff08f10, "exp%c%P%R %12-14f, %0-3f",
-    0x0e808100, 0x0ff08f10, "sin%c%P%R %12-14f, %0-3f",
-    0x0e908100, 0x0ff08f10, "cos%c%P%R %12-14f, %0-3f",
-    0x0ea08100, 0x0ff08f10, "tan%c%P%R %12-14f, %0-3f",
-    0x0eb08100, 0x0ff08f10, "asn%c%P%R %12-14f, %0-3f",
-    0x0ec08100, 0x0ff08f10, "acs%c%P%R %12-14f, %0-3f",
-    0x0ed08100, 0x0ff08f10, "atn%c%P%R %12-14f, %0-3f",
-    0x0e000110, 0x0ff00f1f, "flt%c%P%R %16-18f, %12-15r",
-    0x0e100110, 0x0fff0f98, "fix%c%R %12-15r, %0-2f",
-    0x0e200110, 0x0fff0fff, "wfs%c %12-15r",
-    0x0e300110, 0x0fff0fff, "rfs%c %12-15r",
-    0x0e400110, 0x0fff0fff, "wfc%c %12-15r",
-    0x0e500110, 0x0fff0fff, "rfc%c %12-15r",
-    0x0e90f110, 0x0ff8fff0, "cmf%c %16-18f, %0-3f",
-    0x0eb0f110, 0x0ff8fff0, "cnf%c %16-18f, %0-3f",
-    0x0ed0f110, 0x0ff8fff0, "cmfe%c %16-18f, %0-3f",
-    0x0ef0f110, 0x0ff8fff0, "cnfe%c %16-18f, %0-3f",
-    0x0c000100, 0x0e100f00, "stf%c%Q %12-14f, %A",
-    0x0c100100, 0x0e100f00, "ldf%c%Q %12-14f, %A",
-    /* Generic coprocessor instructions */
-    0x0e000000, 0x0f000010, "cdp%c %8-11d, %20-23d, cr%12-15d, cr%16-19d, cr%0-3d, {%5-7d}",
-    0x0e000010, 0x0f100010, "mrc%c %8-11d, %21-23d, %12-15r, cr%16-19d, cr%0-3d, {%5-7d}",
-    0x0e100010, 0x0f100010, "mcr%c %8-11d, %21-23d, %12-15r, cr%16-19d, cr%0-3d, {%5-7d}",
-    0x0c000000, 0x0e100000, "stc%c%22`l %8-11d, cr%12-15d, %A",
-    0x0c100000, 0x0e100000, "ldc%c%22`l %8-11d, cr%12-15d, %A",
-    /* the rest */
-    0x00000000, 0x00000000, "undefined instruction %0-31x",
-};
-#define N_OPCODES      (sizeof opcodes / sizeof opcodes[0])
index 74fff63..e69de29 100755 (executable)
-# Apply these patches to GDB to produce an Energize GDB.
-# To apply these patches, first cd to gdb-XX/gdb, run "patch -p0 <thisfile",
-# and then Sanitize.
-
-===================================================================
-
-diff -rc .Sanitize .Sanitize
-*** .Sanitize  Mon Jun 22 23:26:00 1992
---- .Sanitize  Sat Jun 27 12:29:59 1992
-***************
-*** 53,58 ****
---- 53,59 ----
-  buildsym.c
-  buildsym.h
-  c-exp.y
-+ cadillac.c
-  call-cmds.h
-  coffread.c
-  command.c
-***************
-*** 70,75 ****
---- 71,77 ----
-  cplus-dem.c
-  createtags
-  dbxread.c
-+ deblib
-  defs.h
-  demangle.h
-  depend
-diff -rc Makefile.in Makefile.in
-*** Makefile.in        Sat Jun 27 12:16:43 1992
---- Makefile.in        Sat Jun 27 12:31:29 1992
-***************
-*** 123,128 ****
---- 123,135 ----
-  READLINE_DEP = $$(READLINE_DIR)
-  RL_LIB = ./../readline${subdir}/libreadline.a
-  
-+ # Cadillac libraries
-+ CONNECTION_DIR = deblib/connection
-+ CONNECTION_LIB = ${CONNECTION_DIR}/libconn.a
-+ CADILLAC_DIR = ${srcdir}/deblib
-+ CADILLAC_INCLUDES = -I${CADILLAC_DIR}/connection -I${CADILLAC_DIR}/debugger
-+ CADILLAC_LIBS = ${CONNECTION_LIB}
-+ 
-  # All the includes used for CFLAGS and for lint.
-  # -I. for config files.
-  # -I${srcdir} possibly for regex.h also.
-***************
-*** 155,166 ****
-  # {X,T}M_CLIBS, defined in *config files, have host- and target-dependent libs.
-  # TERMCAP comes after readline, since readline depends on it.
-  CLIBS = ${BFD_LIB}  ${RL_LIB} ${TERMCAP} ${MMALLOC_LIB} ${LIBIBERTY} \
-!      ${XM_CLIBS} ${TM_CLIBS}
-  CDEPS = ${XM_CDEPS} ${TM_CDEPS} ${BFD_LIB} ${MMALLOC_LIB} ${LIBIBERTY} \
-       ${RL_LIB} ${MMALLOC_LIB}
-  
-  ADD_FILES = ${REGEX} ${ALLOCA} ${XM_ADD_FILES} ${TM_ADD_FILES}
-! ADD_DEPS = ${REGEX1} ${ALLOCA1} ${XM_ADD_FILES} ${TM_ADD_FILES}
-  
-  VERSION = 4.5.6
-  DIST=gdb
---- 162,174 ----
-  # {X,T}M_CLIBS, defined in *config files, have host- and target-dependent libs.
-  # TERMCAP comes after readline, since readline depends on it.
-  CLIBS = ${BFD_LIB}  ${RL_LIB} ${TERMCAP} ${MMALLOC_LIB} ${LIBIBERTY} \
-!      ${XM_CLIBS} ${TM_CLIBS} ${CADILLAC_LIBS}
-  CDEPS = ${XM_CDEPS} ${TM_CDEPS} ${BFD_LIB} ${MMALLOC_LIB} ${LIBIBERTY} \
-       ${RL_LIB} ${MMALLOC_LIB}
-  
-  ADD_FILES = ${REGEX} ${ALLOCA} ${XM_ADD_FILES} ${TM_ADD_FILES}
-! ADD_DEPS = ${REGEX1} ${ALLOCA1} ${XM_ADD_FILES} ${TM_ADD_FILES} \
-!      ${CONNECTION_LIB}
-  
-  VERSION = 4.5.6
-  DIST=gdb
-***************
-*** 176,182 ****
-  # demangling.  For other demangling styles, such as the Annotated C++
-  # Reference Manual (section 7.2.1c) style, set this define in the target-
-  # dependent makefile fragment.
-! DEMANGLE_OPTS=
-  
-  # Host and target-dependent makefile fragments come in here.
-  ####
---- 184,195 ----
-  # demangling.  For other demangling styles, such as the Annotated C++
-  # Reference Manual (section 7.2.1c) style, set this define in the target-
-  # dependent makefile fragment.
-! #
-! # For Energize, default to using style specified in the Annotated C++
-! # Reference Manual, section 7.2.1c, which is what is used by the Lucid C++
-! # compiler for most things.  But there are places where Lucid varies from
-! # the ARM, so select the Lucid specific code also.
-! DEMANGLE_OPTS=-DARM_DEMANGLING -DLUCID_DEMANGLING
-  
-  # Host and target-dependent makefile fragments come in here.
-  ####
-***************
-*** 194,200 ****
-        ${DEMANGLER}.c mem-break.c target.c inftarg.c \
-        dbxread.c coffread.c elfread.c dwarfread.c xcoffread.c \
-        ieee-float.c language.c parse.c buildsym.c objfiles.c \
-!       minsyms.c mipsread.c
-  
-  # Source files in subdirectories (which will be handled separately by
-  #  'make gdb.tar.Z').
---- 207,213 ----
-        ${DEMANGLER}.c mem-break.c target.c inftarg.c \
-        dbxread.c coffread.c elfread.c dwarfread.c xcoffread.c \
-        ieee-float.c language.c parse.c buildsym.c objfiles.c \
-!       minsyms.c mipsread.c cadillac.c
-  
-  # Source files in subdirectories (which will be handled separately by
-  #  'make gdb.tar.Z').
-***************
-*** 279,285 ****
-      command.o utils.o expprint.o environ.o version.o gdbtypes.o \
-      copying.o $(DEPFILES) ${DEMANGLER}.o mem-break.o target.o \
-      inftarg.o ieee-float.o putenv.o parse.o language.o $(YYOBJ) \
-!     buildsym.o objfiles.o minsyms.o \
-      dbxread.o coffread.o elfread.o dwarfread.o xcoffread.o mipsread.o
-  
-  RAPP_OBS = rgdb.o rudp.o rserial.o serial.o udp.o $(XDEPFILES)
---- 292,298 ----
-      command.o utils.o expprint.o environ.o version.o gdbtypes.o \
-      copying.o $(DEPFILES) ${DEMANGLER}.o mem-break.o target.o \
-      inftarg.o ieee-float.o putenv.o parse.o language.o $(YYOBJ) \
-!     buildsym.o objfiles.o minsyms.o cadillac.o \
-      dbxread.o coffread.o elfread.o dwarfread.o xcoffread.o mipsread.o
-  
-  RAPP_OBS = rgdb.o rudp.o rserial.o serial.o udp.o $(XDEPFILES)
-***************
-*** 292,298 ****
-  
-  NTSSTART = kdb-start.o
-  
-! SUBDIRS = doc
-  
-  # For now, shortcut the "configure GDB for fewer languages" stuff.
-  YYFILES = c-exp.tab.c m2-exp.tab.c
---- 305,311 ----
-  
-  NTSSTART = kdb-start.o
-  
-! SUBDIRS = doc ${CONNECTION_DIR}
-  
-  # For now, shortcut the "configure GDB for fewer languages" stuff.
-  YYFILES = c-exp.tab.c m2-exp.tab.c
-***************
-*** 346,351 ****
---- 359,378 ----
-       #load `echo " "$(DEPFILES) | sed -e 's/\.o/.c/g' -e 's, , ../,g'`
-       echo "Load .c corresponding to:" $(DEPFILES)
-  
-+ ${CONNECTION_LIB} :
-+      @(cd ${CONNECTION_DIR}; \
-+              $(MAKE) \
-+                      "against=$(against)" \
-+                      "AR=$(AR)" \
-+                      "AR_FLAGS=$(AR_FLAGS)" \
-+                      "CC=$(CC)" \
-+                      "CFLAGS=$(CFLAGS)" \
-+                      "RANLIB=$(RANLIB)" \
-+                      "MAKEINFO=$(MAKEINFO)" \
-+                      "INSTALL=$(INSTALL)" \
-+                      "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
-+                      "INSTALL_DATA=$(INSTALL_DATA)" \
-+                      "BISON=$(BISON)")
-  
-  # This is useful when debugging GDB, because some Unix's don't let you run GDB
-  # on itself without copying the executable.  So "make gdb1" will make
-***************
-*** 694,699 ****
---- 721,729 ----
-  
-  ttyflush.o: ${srcdir}/nindy-share/ttyflush.c
-       ${CC} -c ${INTERNAL_CFLAGS} ${srcdir}/nindy-share/ttyflush.c
-+ 
-+ cadillac.o: ${srcdir}/cadillac.c
-+      ${CC} -c ${INTERNAL_CFLAGS} ${CADILLAC_INCLUDES} ${srcdir}/cadillac.c
-  
-  lint: $(LINTFILES)
-       $(LINT) $(INCLUDE_CFLAGS) $(LINTFLAGS) $(LINTFILES) \
-diff -rc breakpoint.c breakpoint.c
-*** breakpoint.c       Wed Jun 17 14:53:28 1992
---- breakpoint.c       Sat Jun 27 12:30:01 1992
-***************
-*** 273,278 ****
---- 273,280 ----
-           b->cond_string = NULL;
-           if (from_tty)
-             printf_filtered ("Breakpoint %d now unconditional.\n", bnum);
-+          if (cadillac)
-+            cadillac_condition_breakpoint(b);
-         }
-       else
-         {
-***************
-*** 281,286 ****
---- 283,290 ----
-              typed in or the decompiled expression.  */
-           b->cond_string = savestring (arg, strlen (arg));
-           b->cond = parse_exp_1 (&arg, block_for_pc (b->address), 0);
-+          if (cadillac)
-+            cadillac_condition_breakpoint(b);
-           if (*arg)
-             error ("Junk at end of expression");
-         }
-***************
-*** 316,330 ****
-    ALL_BREAKPOINTS (b)
-      if (b->number == bnum)
-        {
-!      if (from_tty && input_from_terminal_p ())
-!        {
-!          printf_filtered ("Type commands for when breakpoint %d is hit, one per line.\n\
-  End with a line saying just \"end\".\n", bnum);
--          fflush (stdout);
--        }
-       l = read_command_lines ();
-       free_command_lines (&b->commands);
-       b->commands = l;
-       return;
-        }
-    error ("No breakpoint number %d.", bnum);
---- 320,333 ----
-    ALL_BREAKPOINTS (b)
-      if (b->number == bnum)
-        {
-!      if ((from_tty && input_from_terminal_p ()) || cadillac)
-!        printf_filtered ("Type commands for when breakpoint %d is hit, one per line.\n\
-  End with a line saying just \"end\".\n", bnum);
-       l = read_command_lines ();
-       free_command_lines (&b->commands);
-       b->commands = l;
-+      if (cadillac)
-+        cadillac_commands_breakpoint(b);
-       return;
-        }
-    error ("No breakpoint number %d.", bnum);
-***************
-*** 925,930 ****
---- 928,935 ----
-           {
-             b->ignore_count--;
-             this_bp_stop = 0;
-+            if (cadillac)
-+              cadillac_ignore_breakpoint(b);
-           }
-         else
-           {
-***************
-*** 1365,1370 ****
---- 1370,1378 ----
-  mention (b)
-       struct breakpoint *b;
-  {
-+   if (cadillac)
-+     cadillac_create_breakpoint(b);
-+ 
-    switch (b->type)
-      {
-      case bp_watchpoint:
-***************
-*** 2106,2111 ****
---- 2114,2122 ----
-    register struct breakpoint *b;
-    register bpstat bs;
-  
-+   if (cadillac)
-+     cadillac_delete_breakpoint(bpt);
-+ 
-    if (bpt->inserted)
-        target_remove_breakpoint(bpt->address, bpt->shadow_contents);
-  
-***************
-*** 2277,2282 ****
---- 2288,2295 ----
-      if (b->number == bptnum)
-        {
-       b->ignore_count = count;
-+      if (cadillac)
-+        cadillac_ignore_breakpoint(b);
-       if (!from_tty)
-         return;
-       else if (count == 0)
-***************
-*** 2301,2307 ****
-    struct breakpoint *b;
-  
-    ALL_BREAKPOINTS (b)
-!     b->ignore_count = 0;
-  }
-  
-  /* Command to set ignore-count of breakpoint N to COUNT.  */
---- 2314,2324 ----
-    struct breakpoint *b;
-  
-    ALL_BREAKPOINTS (b)
-!     {
-!       b->ignore_count = 0;
-!       if (cadillac)
-!      cadillac_ignore_breakpoint(b);
-!     }
-  }
-  
-  /* Command to set ignore-count of breakpoint N to COUNT.  */
-***************
-*** 2368,2373 ****
---- 2385,2393 ----
-  {
-    bpt->enable = enabled;
-  
-+   if (cadillac)
-+     cadillac_enable_breakpoint(bpt);
-+ 
-    if (xgdb_verbose && bpt->type == bp_breakpoint)
-      printf ("breakpoint #%d enabled\n", bpt->number);
-  
-***************
-*** 2415,2420 ****
---- 2435,2443 ----
-  disable_breakpoint (bpt)
-       struct breakpoint *bpt;
-  {
-+   if (cadillac)
-+     cadillac_disable_breakpoint(bpt);
-+ 
-    bpt->enable = disabled;
-  
-    if (xgdb_verbose && bpt->type == bp_breakpoint)
-diff -rc command.c command.c
-*** command.c  Mon Jun 22 20:33:41 1992
---- command.c  Sat Jun 27 12:30:01 1992
-***************
-*** 1149,1155 ****
-      }
-  
-    if (pid != -1)
-!     while ((rc = wait (&status)) != pid && rc != -1)
-        ;
-    else
-      error ("Fork failed");
---- 1149,1155 ----
-      }
-  
-    if (pid != -1)
-!     while ((rc = cadillac ? cadillac_wait(&status) : wait (&status)) != pid && rc != -1)
-        ;
-    else
-      error ("Fork failed");
-diff -rc config/amix.mh config/amix.mh
-*** config/amix.mh     Tue Jun  9 19:05:16 1992
---- config/amix.mh     Sat Jun 27 12:31:29 1992
-***************
-*** 22,24 ****
---- 22,31 ----
-  
-  # SVR4 puts the BSD compatible install in /usr/ucb.
-  INSTALL = /usr/ucb/install -c
-+ 
-+ # These are the libs that are needed for the Cadillac version of gdb on
-+ # SVR4.  Note that we MUST include the standard C library before libucb.a,
-+ # otherwise we get lots of broken stuff we don't want.
-+ CONNECTION_LIB = deblib/connection/libconn.a
-+ CADILLAC_LIBS = ${CONNECTION_LIB} -L/usr/lib -lm -lnet -lresolv -lform \
-+      -lsocket -lc /usr/ucblib/libucb.a -lnsl
-diff -rc config/ncr3000.mh config/ncr3000.mh
-*** config/ncr3000.mh  Mon Jun 15 12:25:13 1992
---- config/ncr3000.mh  Sat Jun 27 12:31:30 1992
-***************
-*** 38,40 ****
---- 38,47 ----
-  # The /usr/ucb/install program is incompatible (complains about unknown
-  # group staff).  Use good old cp...
-  INSTALL = cp
-+ 
-+ # These are the libs that are needed for the Cadillac version of gdb on
-+ # SVR4.  Note that we MUST include the standard C library before libucb.a,
-+ # otherwise we get lots of broken stuff we don't want.
-+ CONNECTION_LIB = deblib/connection/libconn.a
-+ CADILLAC_LIBS = ${CONNECTION_LIB} -L/usr/lib -lm -lnet -lresolv -lform \
-+      -lsocket -lc /usr/ucblib/libucb.a -lnsl
-diff -rc configure.in configure.in
-*** configure.in       Mon Jun 22 17:25:00 1992
---- configure.in       Sat Jun 27 12:31:29 1992
-***************
-*** 1,4 ****
-! configdirs="doc"
-  srcname="GDB"
-  srctrigger=main.c
-  target_dependent=true
---- 1,4 ----
-! configdirs="deblib doc"
-  srcname="GDB"
-  srctrigger=main.c
-  target_dependent=true
-diff -rc defs.h defs.h
-*** defs.h     Thu Jun 25 04:50:31 1992
---- defs.h     Sat Jun 27 12:30:02 1992
-***************
-*** 770,773 ****
---- 770,842 ----
-  extern CORE_ADDR
-  push_word ();
-  
-+ /* Energize/Cadillac stuff */
-+ 
-+ /* Non-zero means that we're doing the cadillac interface. */
-+ extern int cadillac;
-+ 
-+ /* Get a pty for use with cadillac */
-+ extern char *cadillac_getpty PARAMS ((void));
-+ 
-+ /* Notify cadillac of new process creation */
-+ extern void cadillac_new_process PARAMS ((void));
-+ 
-+ /* Low level wait routine for wait_for_inferior */
-+ extern int cadillac_wait PARAMS ((int *));
-+ 
-+ /* Initialize */
-+ extern void cadillac_initialize PARAMS ((char *, char *));
-+ 
-+ /* Main loop for cadillac protocol driver */
-+ extern void cadillac_main_loop PARAMS ((void));
-+ 
-+ struct cmd_list_element;
-+ 
-+ /* Command hook for cadillac */
-+ extern void cadillac_call_command PARAMS ((struct cmd_list_element *,
-+                                         char *, int));
-+ 
-+ /* Read commands for the command command, and others */
-+ extern char *cadillac_command_line_input PARAMS ((void));
-+ 
-+ struct symbol;
-+ struct type;
-+ 
-+ extern void cadillac_start_variable_annotation PARAMS ((char *,
-+                                                      struct symbol *,
-+                                                      struct type *,
-+                                                      CORE_ADDR,
-+                                                      char *));
-+ 
-+ extern void cadillac_end_variable_annotation PARAMS ((void));
-+ 
-+ extern void cadillac_annotate_function PARAMS ((char *, int, int));
-+ 
-+ struct objfile;
-+ extern void cadillac_symbol_file PARAMS ((struct objfile *));
-+ 
-+ /*extern void cadillac_query PARAMS ((char *, ...));*/
-+ extern void cadillac_query ();       /* Prototypes for varargs don't work */
-+ 
-+ extern char *cadillac_command_line_input PARAMS ((void));
-+ 
-+ extern void cadillac_acknowledge_query PARAMS ((char *));
-+ 
-+ extern void cadillac_fputs PARAMS ((const char *));
-+ 
-+ struct breakpoint;
-+ extern void cadillac_condition_breakpoint PARAMS ((struct breakpoint *));
-+ 
-+ extern void cadillac_commands_breakpoint PARAMS ((struct breakpoint *));
-+ 
-+ extern void cadillac_ignore_breakpoint PARAMS ((struct breakpoint *));
-+ 
-+ extern void cadillac_create_breakpoint PARAMS ((struct breakpoint *));
-+ 
-+ extern void cadillac_delete_breakpoint PARAMS ((struct breakpoint *));
-+ 
-+ extern void cadillac_enable_breakpoint PARAMS ((struct breakpoint *));
-+ 
-+ extern void cadillac_disable_breakpoint PARAMS ((struct breakpoint *));
-+ 
-  #endif /* !defined (DEFS_H) */
-diff -rc inflow.c inflow.c
-*** inflow.c   Tue Jun 23 21:49:19 1992
---- inflow.c   Sat Jun 27 12:30:03 1992
-***************
-*** 81,87 ****
-  static short pgrp_inferior;
-  static short pgrp_ours;
-  # else /* not def SHORT_PGRP */
-! static int pgrp_inferior;
-  static int pgrp_ours;
-  # endif /* not def SHORT_PGRP */
-  #else /* not def TIOCGPGRP */
---- 81,87 ----
-  static short pgrp_inferior;
-  static short pgrp_ours;
-  # else /* not def SHORT_PGRP */
-! int pgrp_inferior;
-  static int pgrp_ours;
-  # endif /* not def SHORT_PGRP */
-  #else /* not def TIOCGPGRP */
-diff -rc infrun.c infrun.c
-*** infrun.c   Tue Jun 23 21:49:22 1992
---- infrun.c   Sat Jun 27 12:30:04 1992
-***************
-*** 617,622 ****
---- 617,624 ----
-     Here we must get it up to actual execution of the real program.  */
-  
-    inferior_pid = pid;                /* Needed for wait_for_inferior stuff below */
-+   if (cadillac)
-+     cadillac_new_process();
-  
-    clear_proceed_status ();
-  
-***************
-*** 755,760 ****
---- 757,764 ----
-  
-    attach (pid);
-    inferior_pid = pid;
-+   if (cadillac) 
-+     cadillac_new_process();
-    push_target (&child_ops);
-  
-    mark_breakpoints_out ();
-diff -rc inftarg.c inftarg.c
-*** inftarg.c  Sun Mar 29 15:21:27 1992
---- inftarg.c  Sat Jun 27 12:30:04 1992
-***************
-*** 58,64 ****
-  #ifdef USE_PROC_FS
-      pid = proc_wait (status);
-  #else
-!     pid = wait (status);
-  #endif
-      if (pid == -1)           /* No more children to wait for */
-        {
---- 58,67 ----
-  #ifdef USE_PROC_FS
-      pid = proc_wait (status);
-  #else
-!     if (cadillac)
-!       pid = cadillac_wait (status);
-!     else
-!       pid = wait (status);
-  #endif
-      if (pid == -1)           /* No more children to wait for */
-        {
-diff -rc main.c main.c
-*** main.c     Mon Jun  8 23:09:23 1992
---- main.c     Sat Jun 27 12:30:05 1992
-***************
-*** 397,402 ****
---- 397,403 ----
-    char *corearg = NULL;
-    char *cdarg = NULL;
-    char *ttyarg = NULL;
-+   char *cadillac_id = NULL;
-  
-    /* Pointers to all arguments of +command option.  */
-    char **cmdarg;
-***************
-*** 492,497 ****
---- 493,499 ----
-       {"tty", required_argument, 0, 't'},
-       {"baud", required_argument, 0, 'b'},
-       {"b", required_argument, 0, 'b'},
-+      {"context", required_argument, 0, 12},
-  /* Allow machine descriptions to add more options... */
-  #ifdef ADDITIONAL_OPTIONS
-       ADDITIONAL_OPTIONS
-***************
-*** 524,529 ****
---- 526,534 ----
-         case 11:
-           cdarg = optarg;
-           break;
-+        case 12:
-+          cadillac_id = optarg;
-+          break;
-         case 's':
-           symarg = optarg;
-           break;
-***************
-*** 670,675 ****
---- 675,683 ----
-    free ((PTR)dirarg);
-    do_cleanups (ALL_CLEANUPS);
-  
-+   if (cadillac_id)
-+     cadillac_initialize (cadillac_id, execarg);
-+ 
-    if (execarg != NULL
-        && symarg != NULL
-        && strcmp (execarg, symarg) == 0)
-***************
-*** 691,696 ****
---- 699,705 ----
-       if (!setjmp (to_top_level))
-         symbol_file_command (symarg, 0);
-      }
-+ 
-    do_cleanups (ALL_CLEANUPS);
-  
-    /* After the symbol file has been read, print a newline to get us
-***************
-*** 818,824 ****
-        if (!setjmp (to_top_level))
-       {
-         do_cleanups (ALL_CLEANUPS);           /* Do complete cleanup */
-!        command_loop ();
-            quit_command ((char *)0, instream == stdin);
-       }
-      }
---- 827,836 ----
-        if (!setjmp (to_top_level))
-       {
-         do_cleanups (ALL_CLEANUPS);           /* Do complete cleanup */
-!        if (cadillac_id)
-!          cadillac_main_loop();
-!        else
-!          command_loop ();
-            quit_command ((char *)0, instream == stdin);
-       }
-      }
-***************
-*** 880,886 ****
-        else if (c->function.cfunc == NO_FUNCTION)
-       error ("That is not a command, just a help topic.");
-        else
-!      (*c->function.cfunc) (arg, from_tty & caution);
-     }
-  
-    /* Tell the user if the language has changed (except first time).  */
---- 892,901 ----
-        else if (c->function.cfunc == NO_FUNCTION)
-       error ("That is not a command, just a help topic.");
-        else
-!      if (cadillac)
-!        cadillac_call_command (c, arg, from_tty & caution);
-!      else
-!        (*c->function.cfunc) (arg, from_tty & caution);
-     }
-  
-    /* Tell the user if the language has changed (except first time).  */
-***************
-*** 1516,1522 ****
-    while (1)
-      {
-        dont_repeat ();
-!       p = command_line_input ((char *) NULL, instream == stdin);
-        if (p == NULL)
-       /* Treat end of file like "end".  */
-       break;
---- 1531,1540 ----
-    while (1)
-      {
-        dont_repeat ();
-!       if (cadillac)
-!      p = cadillac_command_line_input();
-!       else
-!      p = command_line_input ((char *) NULL, instream == stdin);
-        if (p == NULL)
-       /* Treat end of file like "end".  */
-       break;
-***************
-*** 1820,1826 ****
-  void
-  print_prompt ()
-  {
-!   printf ("%s", prompt);
-    fflush (stdout);
-  }
-  \f
---- 1838,1844 ----
-  void
-  print_prompt ()
-  {
-!   printf_filtered ("%s", prompt);
-    fflush (stdout);
-  }
-  \f
-diff -rc printcmd.c printcmd.c
-*** printcmd.c Thu Jun 25 03:58:47 1992
---- printcmd.c Sat Jun 27 12:30:05 1992
-***************
-*** 778,783 ****
---- 778,792 ----
-      {
-        int histindex = record_latest_value (val);
-  
-+       if (cadillac)
-+      {
-+        char buf[20];
-+ 
-+        sprintf(buf, "$%d", histindex);
-+        cadillac_start_variable_annotation(buf, NULL, VALUE_TYPE(val),
-+                                           VALUE_ADDRESS(val), "");
-+      }
-+ 
-        if (inspect)
-       printf ("\031(gdb-makebuffer \"%s\"  %d '(\"", exp, histindex);
-        else
-***************
-*** 784,789 ****
---- 793,800 ----
-       if (histindex >= 0) printf_filtered ("$%d = ", histindex);
-  
-        print_formatted (val, format, fmt.size);
-+       if (cadillac)
-+      cadillac_end_variable_annotation();
-        printf_filtered ("\n");
-        if (inspect)
-       printf("\") )\030");
-***************
-*** 1610,1620 ****
---- 1621,1641 ----
-        standard indentation here is 4 spaces, and val_print indents
-        2 for each recurse.  */
-        val = read_var_value (sym, FRAME_INFO_ID (fi));
-+ 
-+       if (cadillac)
-+      cadillac_start_variable_annotation(SYMBOL_NAME(sym), sym,
-+                                         VALUE_TYPE(val),
-+                                         VALUE_ADDRESS(val), "");
-+ 
-        if (val)
-          val_print (VALUE_TYPE (val), VALUE_CONTENTS (val), VALUE_ADDRESS (val),
-                  stream, 0, 0, 2, Val_no_prettyprint);
-        else
-       fputs_filtered ("???", stream);
-+ 
-+       if (cadillac)
-+      cadillac_end_variable_annotation();
-+ 
-        first = 0;
-      }
-  
-diff -rc stack.c stack.c
-*** stack.c    Sat Jun 20 16:30:33 1992
---- stack.c    Sat Jun 27 12:30:06 1992
-***************
-*** 159,165 ****
-        if (addressprint)
-          printf_filtered ("%s in ", local_hex_string(fi->pc));
-  
-!       fputs_demangled (fname, stdout, 0);
-        fputs_filtered (" (...)\n", stdout);
-        
-        return;
---- 159,168 ----
-        if (addressprint)
-          printf_filtered ("%s in ", local_hex_string(fi->pc));
-  
-!       if (cadillac)
-!      cadillac_annotate_function(fname, 0, level);
-!       else
-!      fputs_demangled (fname, stdout, 0);
-        fputs_filtered (" (...)\n", stdout);
-        
-        return;
-***************
-*** 218,224 ****
-        if (addressprint)
-       if (fi->pc != sal.pc || !sal.symtab)
-         printf_filtered ("%s in ", local_hex_string(fi->pc));
-!       fputs_demangled (funname ? funname : "??", stdout, 0);
-        wrap_here ("   ");
-        fputs_filtered (" (", stdout);
-        if (args)
---- 221,230 ----
-        if (addressprint)
-       if (fi->pc != sal.pc || !sal.symtab)
-         printf_filtered ("%s in ", local_hex_string(fi->pc));
-!       if (cadillac)
-!      cadillac_annotate_function(funname ? funname : "??", 0, level);
-!       else
-!      fputs_demangled (funname ? funname : "??", stdout, 0);
-        wrap_here ("   ");
-        fputs_filtered (" (", stdout);
-        if (args)
-***************
-*** 255,261 ****
-       {
-         if (addressprint && mid_statement)
-           printf_filtered ("%s\t", local_hex_string(fi->pc));
-!        print_source_lines (sal.symtab, sal.line, sal.line + 1, 0);
-       }
-        current_source_line = max (sal.line - lines_to_list/2, 1);
-      }
---- 261,268 ----
-       {
-         if (addressprint && mid_statement)
-           printf_filtered ("%s\t", local_hex_string(fi->pc));
-!        if (!cadillac)
-!          print_source_lines (sal.symtab, sal.line, sal.line + 1, 0);
-       }
-        current_source_line = max (sal.line - lines_to_list/2, 1);
-      }
-***************
-*** 429,435 ****
-    if (funname)
-      {
-        printf_filtered (" in ");
-!       fputs_demangled (funname, stdout, DMGL_ANSI | DMGL_PARAMS);
-      }
-    wrap_here ("   ");
-    if (sal.symtab)
---- 436,446 ----
-    if (funname)
-      {
-        printf_filtered (" in ");
-!       if (cadillac)
-!      cadillac_annotate_function(funname, DMGL_ANSI | DMGL_PARAMS,
-!                               selected_frame_level);
-!       else
-!      fputs_demangled (funname, stdout, DMGL_ANSI | DMGL_PARAMS);
-      }
-    wrap_here ("   ");
-    if (sal.symtab)
-diff -rc symfile.c symfile.c
-*** symfile.c  Sat Jun 13 09:20:12 1992
---- symfile.c  Sat Jun 27 12:30:06 1992
-***************
-*** 555,560 ****
---- 555,563 ----
-        fflush (stdout);
-      }
-  
-+   if (cadillac)
-+     cadillac_symbol_file(objfile);
-+ 
-    return (objfile);
-  }
-  
-diff -rc utils.c utils.c
-*** utils.c    Mon Jun 15 07:27:07 1992
---- utils.c    Sat Jun 27 12:30:07 1992
-***************
-*** 96,101 ****
---- 96,102 ----
-  
-  char *error_pre_print;
-  char *warning_pre_print = "\nwarning: ";
-+ 
-  \f
-  /* Add a new cleanup to the cleanup_chain,
-     and return the previous chain pointer
-***************
-*** 694,700 ****
-    register int ans2;
-  
-    /* Automatically answer "yes" if input is not from a terminal.  */
-!   if (!input_from_terminal_p ())
-      return 1;
-  
-    while (1)
---- 695,701 ----
-    register int ans2;
-  
-    /* Automatically answer "yes" if input is not from a terminal.  */
-!   if (!input_from_terminal_p () && !cadillac)
-      return 1;
-  
-    while (1)
-***************
-*** 701,721 ****
-      {
-        va_start (args);
-        ctlstr = va_arg (args, char *);
-        vfprintf_filtered (stdout, ctlstr, args);
--       va_end (args);
-        printf_filtered ("(y or n) ");
-!       fflush (stdout);
-!       answer = fgetc (stdin);
-!       clearerr (stdin);              /* in case of C-d */
-!       if (answer == EOF)     /* C-d */
-!         return 1;
-!       if (answer != '\n')    /* Eat rest of input line, to EOF or newline */
-!      do 
-!        {
-!          ans2 = fgetc (stdin);
-!          clearerr (stdin);
-!        }
-!         while (ans2 != EOF && ans2 != '\n');
-        if (answer >= 'a')
-       answer -= 040;
-        if (answer == 'Y')
---- 702,734 ----
-      {
-        va_start (args);
-        ctlstr = va_arg (args, char *);
-+       if (cadillac)
-+      cadillac_query (ctlstr, args);
-        vfprintf_filtered (stdout, ctlstr, args);
-        printf_filtered ("(y or n) ");
-!       if (cadillac)
-!      {
-!        char *buf;
-! 
-!        buf = cadillac_command_line_input();
-!        answer = buf ? *buf : 'Y';
-!        cadillac_acknowledge_query(buf);
-!      }
-!       else
-!      {
-!        fflush (stdout);
-!        answer = fgetc (stdin);
-!        clearerr (stdin);             /* in case of C-d */
-!        if (answer == EOF)    /* C-d */
-!          return 1;
-!        if (answer != '\n')   /* Eat rest of input line, to EOF or newline */
-!          do 
-!            {
-!              ans2 = fgetc (stdin);
-!              clearerr (stdin);
-!            }
-!        while (ans2 != EOF && ans2 != '\n');
-!      }
-        if (answer >= 'a')
-       answer -= 040;
-        if (answer == 'Y')
-***************
-*** 723,728 ****
---- 736,742 ----
-        if (answer == 'N')
-       return 0;
-        printf_filtered ("Please answer y or n.\n");
-+       va_end (args);
-      }
-  }
-  
-***************
-*** 989,994 ****
---- 1003,1014 ----
-    if (linebuffer == 0)
-      return;
-    
-+   if (cadillac)
-+     {
-+       cadillac_fputs(linebuffer);
-+       return;
-+     }
-+ 
-    /* Don't do any filtering if it is disabled.  */
-    if (stream != stdout
-     || (lines_per_page == UINT_MAX && chars_per_line == UINT_MAX))
-diff -rc valprint.c valprint.c
-*** valprint.c Tue Jun 23 23:24:51 1992
---- valprint.c Sat Jun 27 12:30:07 1992
-***************
-*** 485,490 ****
---- 485,491 ----
-       struct type **dont_print;
-  {
-    int i, len, n_baseclasses;
-+   char expr_tag[100];                /* Cadillac */
-  
-    check_stub_type (type);
-  
-***************
-*** 549,554 ****
---- 550,563 ----
-             fprint_symbol (stream, TYPE_FIELD_NAME (type, i));
-             fputs_filtered (" = ", stream);
-           }
-+ 
-+        sprintf(expr_tag, ".%s", TYPE_FIELD_NAME(type, i));
-+ 
-+        if (cadillac)
-+          cadillac_start_variable_annotation(expr_tag, NULL,
-+                                             TYPE_FIELD_TYPE(type, i),
-+                                             (CORE_ADDR) (valaddr + TYPE_FIELD_BITPOS(type, i) / 8),
-+                                             "");
-         if (TYPE_FIELD_PACKED (type, i))
-           {
-             value v;
-***************
-*** 567,572 ****
---- 576,583 ----
-                        valaddr + TYPE_FIELD_BITPOS (type, i) / 8,
-                        0, stream, format, 0, recurse + 1, pretty);
-           }
-+        if (cadillac)
-+          cadillac_end_variable_annotation();
-       }
-        if (pretty)
-       {
-***************
-*** 801,806 ****
---- 812,818 ----
-                 unsigned int rep1;
-                 /* Number of repetitions we have detected so far.  */
-                 unsigned int reps;
-+                char expr_tag[100]; /* Cadillac */
-                 
-                 if (i != 0)
-                   if (arrayprint)
-***************
-*** 822,827 ****
---- 834,845 ----
-                     ++rep1;
-                   }
-  
-+                sprintf(expr_tag, "[%d]", i);
-+                if (cadillac)
-+                  cadillac_start_variable_annotation(expr_tag, NULL,
-+                                                     elttype,
-+                                                     (CORE_ADDR) (valaddr + i * eltlen),
-+                                                     "");
-                 if (reps > REPEAT_COUNT_THRESHOLD)
-                   {
-                     val_print (elttype, valaddr + i * eltlen,
-***************
-*** 838,843 ****
---- 856,863 ----
-                                recurse + 1, pretty);
-                     things_printed++;
-                   }
-+                if (cadillac)
-+                  cadillac_end_variable_annotation();
-               }
-             if (i < len)
-               fprintf_filtered (stream, "...");
index 4f59924..e69de29 100755 (executable)
-/* Energize (formerly known as Cadillac) interface routines.
-   Copyright 1991, 1992 Free Software Foundation, Inc.
-
-This file is part of GDB.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-#include "defs.h"
-#include "symtab.h"
-#include "inferior.h"
-#include "command.h"
-#include "bfd.h"
-#include "symfile.h"
-#include "objfiles.h"
-#include <sys/types.h>
-#include <sys/time.h>
-#include <sys/param.h>
-#include <connection.h>
-#include <genericreq.h>
-#include <debuggerreq.h>
-#include <debuggerconn.h>
-#include <ttyconn.h>
-#include <varargs.h>
-#include <sys/stat.h>
-#ifdef USG
-#include <sys/file.h>
-#endif
-#include <fcntl.h>
-#include <sys/filio.h>
-#include <setjmp.h>
-#include <signal.h>
-#include <sys/errno.h>
-#include <termios.h>
-#include <string.h>
-
-/* Non-zero means that we're doing the cadillac interface. */
-int cadillac = 0;
-
-/* Connection block for debugger<=>kernel communications. */
-static Connection *conn = 0;
-
-/* fd for our socket to the kernel. */
-static int kerfd;
-
-/* The kernel's ID for this instance of the program. */
-static int program_id;
-
-static int instance_id;
-
-/* The fd for the pty associated with the inferior. */
-static int inferior_pty = -1;
-static int inferior_tty = -1;
-
-static int has_run = 0;
-
-extern int pgrp_inferior;
-
-extern char *source_path;
-
-char **pprompt;                        /* Pointer to pointer to prompt */
-
-/* Tell cadillac_command_line_input() where to get its text from */
-static int doing_breakcommands_message = 0;
-
-/* Stash command text here */
-static char *command_line_text = 0;
-static int command_line_length = 0;
-
-/* Flags returned by wait_for_events() */
-#define KERNEL_EVENT 1
-#define PTY_EVENT 2
-
-\f
-/* This routine redirects the output of fputs_filtered to the kernel so that
-   the user can see what's going on in his debugger window. */
-
-void
-cadillac_fputs(ptr)
-     const char *ptr;
-{
-  if (conn)
-    CVWriteTranscriptInfo (conn, instance_id, (char *)ptr);
-  else
-    fputs (ptr, stdout);
-}
-
-void
-cadillac_query(query, args)
-     char *query;
-     va_list args;
-{
-  char buf[100];
-
-  vsprintf(buf, query, args);
-
-  CVWriteQueryInfo(conn,
-                  instance_id,
-                  CQueryConfirm,
-                  qno_unknown,
-                  buf,
-                  "");         /* transcript */
-}
-
-void
-cadillac_acknowledge_query(ack)
-     char *ack;
-{
-  CVWriteQueryInfo(conn,
-                  instance_id,
-                  CQueryAcknowleged,
-                  0,
-                  ack,
-                  "");         /* transcript */
-}
-
-/* Copy all data from the pty to the kernel. */
-
-static void
-pty_to_kernel()
-{
-  CTtyRequest *req;
-  char buf[1024];
-  int cc;
-
-  while (1)
-    {
-      cc = read(inferior_pty, buf, sizeof(buf));
-
-      if (cc == 0
-         || (cc < 0
-             && errno == EWOULDBLOCK))
-       break;
-
-      if (cc < 0)
-       {
-         close(inferior_pty);
-         inferior_pty = -1;
-         perror("pty read error");
-         break;
-       }
-
-      req = CWriteTtyRequest(conn, TextIORType);
-      CWriteVstringLen(conn, buf, cc);
-      CWriteLength(conn);
-    }
-  CWriteRequestBuffer(conn);
-}
-
-/* Copy data from the kernel to the pty. */
-
-static void
-kernel_to_pty(data, len)
-     char *data;
-     int len;
-{
-  int cc;
-
-  cc = write(inferior_pty, data, len);
-
-  if (cc != len)
-    {
-      if (cc < 0)
-       {
-         close(inferior_pty);
-         inferior_pty = -1;
-         perror("pty write error");
-         return;
-       }
-      printf("Couldn't write all the data to the pty, wanted %d, got %d\n",
-            len, cc);
-    }
-}
-\f
-static char *
-full_filename(symtab)
-     struct symtab *symtab;
-{
-  int pathlen;
-  char *filename;
-
-  if (!symtab)
-    return NULL;
-
-  if (symtab->fullname)
-    return savestring(symtab->fullname, strlen(symtab->fullname));
-
-  if (symtab->dirname)
-    pathlen = strlen(symtab->dirname);
-  else
-    pathlen = 0;
-  if (symtab->filename)
-    pathlen += strlen(symtab->filename);
-
-  filename = xmalloc(pathlen+1);
-
-  if (symtab->dirname)
-    strcpy(filename, symtab->dirname);
-  else
-    *filename = '\000';
-  if (symtab->filename)
-    strcat(filename, symtab->filename);
-
-  return filename;
-}
-
-/* Tell the cadillac kernel how high the stack is so that frame numbers (which
-   are relative to the current stack height make sense.
-
-   Calculate the number of frames on the stack, and the number of subroutine
-   invocations that haven't changed since the last call to this routine.  The
-   second number is calculated by comparing the PCs of the current stack frames
-   to the PCs of the previous set of stack frames.  The screw here is that a
-   subroutine may call several different procedures, which means that the PC
-   in its frame changes, even though you are still in the same subroutine.  We
-   resolve this by converting the frames PC into the PC at the start of the
-   function (for efficiency, this is done only if the simple comparison test
-   fails). */
-
-struct pclist
-{
-  CORE_ADDR pc;
-  struct pclist *next;
-};
-
-/* Non-zero means that Cadillac kernel already knows how high the stack is. */
-static int stack_info_valid = 0;
-
-static void
-send_stack_info()
-{
-  struct pclist *pclist = 0, *pli, *opli;
-  static struct pclist *old_pclist;
-  FRAME frame;
-  int height, similar;
-
-  if (stack_info_valid)
-    return;
-
-  height = 0;
-  similar = 0;
-
-/* First, calculate the stack height, and build the new pclist */
-
-  for (frame = get_current_frame();
-       frame != 0;
-       frame = get_prev_frame(frame))
-    {
-      (height)++;
-      pli = (struct pclist *)xmalloc(sizeof(struct pclist));
-
-      pli->pc = frame->pc;
-      pli->next = pclist;
-      pclist = pli;
-    }
-
-/* Now, figure out how much of the stack hasn't changed */
-
-  for (pli = pclist, opli = old_pclist;
-       pli != 0 && opli != 0;
-       pli = pli->next, opli = opli->next, (similar)++)
-    {
-      if ((pli->pc != opli->pc)
-         && (get_pc_function_start(pli->pc)
-             != get_pc_function_start(opli->pc)))
-       break;
-    }
-
-/* Free up all elements of the old pclist */
-
-  opli = old_pclist;
-
-  while (opli)
-    {
-      pli = opli->next;
-      free (opli);
-      opli = pli;
-    }
-
-  old_pclist = pclist;         /* Install the new pclist */
-
-  CVWriteStackSizeInfo(conn,
-                      instance_id,
-                      height,  /* Frame depth */
-                      CInnerFrameIs0,
-                      similar, /* Frame diff */
-                      ""       /* Transcript */
-                      );
-
-  stack_info_valid = 1;
-}
-
-/* Tell the kernel where we are in the program, and what the stack looks like.
-   */
-
-static void
-send_status()
-{
-  static int linecount = 48;
-  struct symtab_and_line sal;
-  struct symbol *symbol;
-  char *funcname, *filename;
-  static int sent_prog_inst = 0;
-
-  if (!has_run)
-    return;
-
-  if (inferior_pid == 0)       /* target has died */
-    {
-      CVWriteProgramTerminatedInfo(conn,
-                                  instance_id,
-                                  ""
-                                  );
-      return;
-    }
-
-  sal = find_pc_line(stop_pc, 0);
-  symbol = find_pc_function(stop_pc);
-
-  funcname = symbol ? symbol->name : "";
-  filename = full_filename(sal.symtab);
-
-  if (!sent_prog_inst)
-    {
-      sent_prog_inst = 1;
-      CVWriteProgramInstanceInfo(conn,
-                                program_id,
-                                instance_id,
-                                "", /* hostname */
-                                "", /* arglist */
-                                ""
-                                );
-    }
-
-  send_stack_info();
-
-  CVWriteStackFrameInfo(conn,
-                       instance_id,
-                       sal.line,
-                       CFileLinePos,
-                       0,      /* XXX - frame # */
-                       funcname,
-                       filename,
-                       ""      /* XXX ? transcript */
-                       );
-
-  CVWriteProgramStoppedInfo(conn,
-                           instance_id,
-                           0,  /* XXX - breakpoint # or signal # */
-                           CDebuggerCommand,
-                           funcname,
-                           ""  /* XXX ? transcript */
-                           );
-
-  if (filename)
-    free(filename);
-}
-
-/* Call this to output annotated function names.  Names will be demangled if
-   necessary.  arg_mode contains flags that are passed on to cplus_demangle. */
-
-void
-cadillac_annotate_function(funcname, arg_mode, level)
-     char *funcname;
-     int arg_mode;
-     int level;
-{
-  extern int demangle;
-  char *demangled_name = NULL;
-
-
-  if (funcname == NULL)
-    return;
-
-  if (demangle)
-    {
-      demangled_name = cplus_demangle(funcname, arg_mode);
-
-      if (demangled_name)
-       funcname = demangled_name;
-    }
-
-  send_stack_info();
-
-  if (level < 0) level = 0;
-
-  CVWriteBackTraceEntryInfo(conn,
-                           instance_id,
-                           level, /* frameNo */
-                           funcname);
-
-  if (demangled_name)
-    free(demangled_name);
-}
-
-/* Call this just prior to printing out the name & value of a variable.  This
-   tells the kernel where to annotate the output. */
-
-/* The args are:
-   expression - A text handle on what GDB can use to reference this value.
-               This can be a symbol name, or a convenience var, etc...
-   symbol - Used to determine the scope of the data.  May be NULL.
-   type - Determines if we have a pointer ref, and the print name of the type.
-          Used in ShowValue message.
-   valaddr - The address in target memory of the data.
-   field - The field name of the struct or union element being referenced.
-*/
-
-static char cum_expr[200];     /* Cumulative expression */
-static char *expr_stack[100] = {cum_expr}; /* Pointers to end of expressions */
-static char **last_expr = expr_stack;  /* Current expr stack pointer */
-
-void
-cadillac_start_variable_annotation(expression, symbol, type, valaddr, field)
-     char *expression;
-     struct symbol *symbol;
-     struct type *type;
-     CORE_ADDR valaddr;
-     char *field;
-{
-  int ref_type;
-  int stor_cl;
-  enum type_code type_code;
-  enum address_class sym_class;
-  char *type_cast;
-
-  send_stack_info();
-
-  strcpy(*last_expr++, expression);
-  *last_expr = *(last_expr-1) + strlen(expression);
-
-  switch (TYPE_CODE(type))
-    {
-    case TYPE_CODE_ARRAY:
-    case TYPE_CODE_STRUCT:
-    case TYPE_CODE_UNION:
-    case TYPE_CODE_ENUM:
-    case TYPE_CODE_INT:
-    case TYPE_CODE_FLT:
-      ref_type = CValueValueRef;
-      break;
-    case TYPE_CODE_PTR:
-      ref_type = CValuePointerRef;
-      break;
-    default:
-      ref_type = CValueUndefRef;
-      break;
-    }
-
-/* Make sure that pointer points at something we understand */
-
-  if (ref_type == CValuePointerRef)
-    switch (TYPE_CODE(TYPE_TARGET_TYPE(type)))
-      {
-      case TYPE_CODE_PTR:
-      case TYPE_CODE_ARRAY:
-      case TYPE_CODE_STRUCT:
-      case TYPE_CODE_UNION:
-      case TYPE_CODE_ENUM:
-      case TYPE_CODE_INT:
-      case TYPE_CODE_FLT:
-       break;
-      default:
-       ref_type = CValueUndefRef;
-       break;
-      }
-
-  if (symbol)
-    {
-      sym_class = SYMBOL_CLASS(symbol);
-
-      switch (sym_class)
-       {
-       case LOC_CONST:
-       case LOC_CONST_BYTES:
-         stor_cl = CValueStorStaticConst;
-         break;
-       case LOC_STATIC:
-         stor_cl = CValueStorStaticVar;
-         break;
-       case LOC_REGISTER:
-       case LOC_REGPARM:
-         stor_cl = CValueStorRegister;
-         break;
-       case LOC_ARG:
-       case LOC_REF_ARG:
-       case LOC_LOCAL:
-       case LOC_LOCAL_ARG:
-         stor_cl = CValueStorLocalVar;
-         break;
-       default:
-         stor_cl = CValueStorUndef;
-         break;
-       }
-    }
-  else
-    stor_cl = CValueStorUndef;
-
-  type_cast = TYPE_NAME(type);
-
-  CVWriteValueBeginInfo(conn,
-                       instance_id,
-                       valaddr,
-                       ref_type,
-                       stor_cl,
-                       0,      /* XXX - frameno */
-                       cum_expr,
-                       field,
-                       type_cast,
-                       "");    /* transcript */
-}
-
-void
-cadillac_end_variable_annotation()
-{
-  last_expr--;                 /* Pop the expr stack */
-  **last_expr = '\000';                /* Cut off the last part of the expr */
-
-  CVWriteValueEndInfo(conn,
-                     instance_id,
-                     "");      /* transcript */
-}
-\f
-/* Tell the kernel that the target is now running. */
-
-static void
-go_busy()
-{
-  CVWriteProgramBusyInfo(conn,
-                        instance_id,
-                        "");   /* XXX ? transcript */
-  CWriteRequestBuffer(conn);   /* Must take place synchronusly! */
-  stack_info_valid = 0;
-}
-
-\f
-void
-cadillac_symbol_file(objfile)
-     struct objfile *objfile;
-{
-  CVWriteSymbolTableInfo(conn,
-                        objfile->name,
-                        "");   /* Transcript */
-}
-
-/* execute_command_1(echo, queue, cmd, args) - echo - non-zero means echo the
-   command.  queue - non-zero means don't execute it now, just save it away for
-   later.  cmd - string containing printf control sequences.  args - list of
-   arguments needed by those control sequences.
- */
-
-/* Linked list of queued up commands */
-static struct command_line *queued_commands = 0;
-static struct command_line *last_queued_command = 0;
-
-/* Call this routine to save a command for later.  The command string is
-   copied into freshly malloc'ed memory. */
-
-static void
-queue_command(cmd)
-     char *cmd;
-{
-  char *buf;
-  struct command_line *cl;
-  unsigned long s;
-
-  s = (strlen(cmd) + 1) + 7 & ~(unsigned long)7;
-
-  buf = (char *)xmalloc(s + sizeof(struct command_line));
-  cl = (struct command_line *)(buf + s);
-  cl->next = 0;
-  cl->line = buf;
-
-  strncpy(cl->line, cmd, s);
-
-  if (queued_commands)
-    last_queued_command->next = cl;
-  else
-    queued_commands = cl;
-
-  last_queued_command = cl;
-}
-
-/* Call this procedure to take a command off of the command queue.  It returns
-   a pointer to a buf which the caller is responsible for freeing.  NULL is
-   returned if there are no commands queued. */
-
-static char *
-dequeue_command()
-{
-  struct command_line *cl;
-  char *cmd;
-
-  cl = queued_commands;
-
-  if (!cl)
-    return NULL;
-
-  queued_commands = cl->next;
-
-  return cl->line;
-}
-
-static void
-execute_command_1(va_alist)
-     va_dcl
-{
-  char buf[100];               /* XXX - make buf dynamic! */
-  
-  int echo;
-  int queue;
-  char *cmd;
-  va_list args;
-
-  va_start(args);
-
-  echo = va_arg(args, int);
-  queue = va_arg(args, int);
-  cmd = va_arg(args, char *);
-
-  vsprintf(buf, cmd, args);
-
-  if (queue)
-    queue_command(buf);
-  else
-    {
-      if (echo)
-       printf_filtered("%s\n", buf);
-      execute_command(buf, 1);
-    }
-
-  va_end(args);
-}
-
-#ifdef KERNEL_RECORD
-FILE *kerout;
-
-static int
-kernel_record(fd, ptr, num)
-     int fd, num;
-     char *ptr;
-
-{
-  fwrite(ptr, num, 1, kerout);
-  fflush(kerout);
-  return write(fd, ptr, num);
-}
-#endif
-
-void
-cadillac_condition_breakpoint(b)
-     struct breakpoint *b;
-{
-  CVWriteBreakConditionInfo(conn,
-                           instance_id,
-                           b->number,
-                           b->cond_string ? b->cond_string : "",
-                           ""  /* transcript */
-                           );
-}
-
-void
-cadillac_commands_breakpoint(b)
-     struct breakpoint *b;
-{
-  struct command_line *l;
-
-  CVWriteBreakCommandBegInfo(conn,
-                            instance_id,
-                            b->number,
-                            ""); /* transcript */
-
-  for (l = b->commands; l; l = l->next)
-    CVWriteBreakCommandEntryInfo(conn,
-                                instance_id,
-                                l->line,
-                                ""); /* transcript */
-
-  CVWriteBreakCommandEndInfo(conn,
-                            instance_id,
-                            ""); /* transcript */
-}
-
-static void
-breakpoint_notify(b, action)
-     struct breakpoint *b;
-     int action;
-{
-  struct symbol *sym;
-  char *funcname = "";
-  char *filename;
-  char *included_in_filename = "";
-
-  if (b->type != bp_breakpoint)
-    return;
-
-  filename = full_filename(b->symtab);
-
-  sym = find_pc_function(b->address);
-  if (sym)
-    funcname = SYMBOL_NAME(sym);
-
-  CVWriteBreakpointInfo (conn,
-                        instance_id,
-                        b->number,
-                        b->line_number,
-                        CFileLinePos,
-                        CBreakOnInstrAccess,
-                        action,
-                        b->ignore_count,
-                        funcname,
-                        filename ? filename : "",
-                        "",    /* included_in_filename */
-                        ""     /* transcript */
-                        );
-
-  if (b->commands)
-    cadillac_commands_breakpoint(b);
-
-  cadillac_condition_breakpoint(b);
-
-  if (filename)
-    free(filename);
-}
-
-void
-cadillac_create_breakpoint(b)
-     struct breakpoint *b;
-{
-  breakpoint_notify(b, CEnableBreakpoint);
-}
-
-void
-cadillac_delete_breakpoint(b)
-     struct breakpoint *b;
-{
-  breakpoint_notify(b, CDeleteBreakpoint);
-}
-
-void
-cadillac_enable_breakpoint(b)
-     struct breakpoint *b;
-{
-  breakpoint_notify(b, CEnableBreakpoint);
-}
-
-void
-cadillac_disable_breakpoint(b)
-     struct breakpoint *b;
-{
-  breakpoint_notify(b, CDisableBreakpoint);
-}
-
-void
-cadillac_ignore_breakpoint(b)
-     struct breakpoint *b;
-{
-  breakpoint_notify(b, CBreakAttrUnchanged);
-}
-\f
-/* Open up a pty and its associated tty.  Return the fd of the tty. */
-
-static void
-getpty()
-{
-  int n, ptyfd, ttyfd;
-  static char dev[30];
-  struct stat statbuf;
-  struct termios termios;
-
-#define HIGHPTY (('z' - 'p') * 16 - 1)
-
-  for (n = 0; n <= HIGHPTY; n++)
-    {
-      sprintf(dev, "/dev/pty%c%x", n/16 + 'p', n%16);
-      if (stat(dev, &statbuf))
-       break;
-      ptyfd = open(dev, O_RDWR);
-      if (ptyfd < 0)
-       continue;
-      sprintf(dev, "/dev/tty%c%x", n/16 + 'p', n%16);
-      ttyfd = open(dev, O_RDWR);
-      if (ttyfd < 0) {close(ptyfd); continue;}
-
-      /* Setup pty for non-blocking I/O.  Also make it give us a SIGIO when
-        there's data available.  */
-
-      n = fcntl(ptyfd, F_GETFL, 0);
-      fcntl(ptyfd, F_SETFL, n|FNDELAY|FASYNC);
-      fcntl(ptyfd, F_SETOWN, getpid());
-
-      tcgetattr(ttyfd, &termios);
-      termios.c_oflag &= ~OPOST; /* No post-processing */
-      tcsetattr(ttyfd, TCSANOW, &termios);
-
-      inferior_pty = ptyfd;
-      inferior_tty = ttyfd;
-      return;
-    }
-
-  error ("getpty: can't get a pty\n");
-}
-\f
-/* Examine a protocol packet from the driver. */
-
-static void
-kernel_dispatch(queue)
-     int queue;                        /* Non-zero means we should just queue up
-                                  commands. */
-{
-  register CHeader *head;
-
-  head = (CHeader *)CPeekNextRequest (conn);
-  if (head == NULL)
-    {
-      fprintf (stderr, "EOF on kernel read!\n");
-      exit (1);
-    }
-
-  if (head->reqType < LastTtyRequestRType)
-    {
-      CTtyRequest* req = CReadTtyRequest (conn);
-      switch (req->head.reqType)
-       {
-       case AcceptConnectionRType:
-         /* Tell the rest of the world that cadillac is now set up */
-         CSkipRequest (conn);
-         break;
-
-       case RefuseConnectionRType:
-         fprintf (stderr, "Debugger connection refused\n");
-         exit (1);
-
-       case KillProgramRType:
-         exit (0);
-
-       case TextIORType:
-         {
-           char *p;
-           ReqLen len;
-
-           p = CGetVstring(conn, &len);
-           kernel_to_pty(p, len);
-         }
-         break;
-       default:
-         fprintf(stderr, "Unknown request type = %d\n",
-                 req->head.reqType);
-         break;
-       }
-    }
-  else
-    {
-      CVDebuggerRequest *req = CVReadDebuggerRequest (conn);
-      if (!req)
-       {
-         fprintf (stderr, "CVReadDebuggerRequest returned NULL, type = %d\n",
-                  head->reqType);
-         exit(1);
-       }
-
-      switch (req->head.request->reqType)
-       {
-       case OpenProgramInstanceRType:
-         {
-           char *arglist, buf[100]; /* XXX - Make buf dynamic! */
-           int arglen;
-           /* XXX - should notice when program_id changes */
-           arglist = req->openProgramInstance.progArglist.text;
-           arglen = req->openProgramInstance.progArglist.byteLen;
-
-           execute_command_1(1, queue, "break main");
-           execute_command_1(1, queue, "enable delete $bpnum");
-           if (arglist)
-             {
-               execute_command_1(1, queue, "set args %.*s", arglen, arglist);
-             }
-           execute_command_1(1, queue, "run");
-         }
-         break;
-       case SearchPathRType:
-         directory_command(req->searchPath.searchPath.text, 0);
-         break;
-       case QuitDebuggerRType:
-         execute_command_1(1, queue, "quit");
-         break;
-       case RunRType:
-         if (req->run.request->useArglist == CNewArglist)
-           {
-             execute_command_1(1, queue, "set args %.*s",
-                               req->run.progArglist.byteLen,
-                               req->run.progArglist.text);
-           }
-         execute_command_1(1, queue, "run");
-         break;
-       case ContinueRType:
-         execute_command_1(1, queue, "continue");
-         break;
-       case StepRType:
-         execute_command_1(1, queue, "step %d", req->step.request->stepCount);
-         break;
-       case NextRType:
-         execute_command_1(1, queue, "next %d", req->next.request->nextCount);
-         break;
-       case ChangeStackFrameRType:
-         switch (req->changeStackFrame.request->frameMovement)
-           {
-           case CToCurrentStackFrame:
-             execute_command_1(1, queue, "frame %d",
-                               req->changeStackFrame.request->frameNo);
-             break;
-           case CToInnerStackFrame:
-             execute_command_1(1, queue, "down %d",
-                               req->changeStackFrame.request->frameNo);
-             break;
-           case CToOuterStackFrame:
-             execute_command_1(1, queue, "up %d",
-                               req->changeStackFrame.request->frameNo);
-             break;
-           case CToAbsoluteStackFrame:
-             execute_command_1(1, queue, "frame %d",
-                               req->changeStackFrame.request->frameNo);
-             break;
-           }
-         break;
-       case BackTraceRType:
-         /* XXX - deal with limit??? */
-         execute_command_1(1, queue, "backtrace");
-         break;
-       case FinishRType:
-         execute_command_1(1, queue, "finish");
-         break;
-       case TerminateProgramRType:
-         execute_command_1(1, queue, "kill");
-         break;
-       case NewBreakpointRType:
-         {
-           char *tail;
-           int skipped;
-
-           tail = strrchr(req->newBreakpoint.fileName.text, '/');
-           if (!tail)
-             tail = req->newBreakpoint.fileName.text;
-           else
-             tail++;
-           skipped = tail - req->newBreakpoint.fileName.text;
-           execute_command_1(1, queue, "break %.*s:%d",
-                             req->newBreakpoint.fileName.byteLen - skipped,
-                             tail,
-                             req->newBreakpoint.request->fileLinePos);
-         }
-         break;
-       case StopRType:
-         killpg(pgrp_inferior, SIGINT);
-         break;
-       case UserInputRType:
-         {
-           char *text;
-           long len;
-
-           /* XXX - should really break command up into seperate lines
-              and spoon-feed it to execute_command */
-
-           text = req->userInput.userInput.text;
-           len = req->userInput.userInput.byteLen;
-
-           if (text[len-1] == '\n') text[len-1] = '\000';
-
-           while (*text == ' ' || *text == '\t') text++;
-
-           if (strcmp(text, "]*[") == 0) /* XXX - What does this mean??? */
-             break;
-
-           if (*text != '\000')
-             execute_command_1(0, queue, "%s", text);
-           else
-             print_prompt();   /* User just typed a blank line */
-         }
-         break;
-       case QueryResponseRType:
-         {
-           char *resp;
-
-           if (req->queryResponse.request->response)
-             resp = "y";
-           else
-             resp = "n";
-           execute_command_1(1, 1, resp);
-           printf_filtered("%s\n", resp);
-         }
-         break;
-       case ChangeBreakpointRType:
-         switch (req->changeBreakpoint.request->breakpointAttr)
-           {
-           case CBreakAttrUnchanged:
-             execute_command_1(1, queue, "ignore %d %d",
-                               req->changeBreakpoint.request->breakpointId,
-                               req->changeBreakpoint.request->ignoreCount);
-             break;
-           case CEnableBreakpoint:
-             execute_command_1(1, queue, "enable %d",
-                               req->changeBreakpoint.request->breakpointId);
-             break;
-           case CDisableBreakpoint:
-             execute_command_1(1, queue, "disable %d",
-                               req->changeBreakpoint.request->breakpointId);
-             break;
-           case CDeleteBreakpoint:
-             execute_command_1(1, queue, "delete %d",
-                               req->changeBreakpoint.request->breakpointId);
-             break;
-           case CEnableDisableBreakpoint:
-             execute_command_1(1, queue, "enable once %d",
-                               req->changeBreakpoint.request->breakpointId);
-             break;
-           case CEnableDeleteBreakpoint:
-             execute_command_1(1, queue, "enable delete %d",
-                               req->changeBreakpoint.request->breakpointId);
-             break;
-           default:
-             printf_filtered("ChangeBreakpointRType: unknown breakpointAttr\n");
-             printf_filtered("  breakpointAttr = %d\n",
-                             req->changeBreakpoint.request->breakpointAttr);
-             printf_filtered("  breakpointId = %d\n",
-                             req->changeBreakpoint.request->breakpointId);
-             printf_filtered("  breakpointType = %d\n",
-                             req->changeBreakpoint.request->breakpointType);
-             printf_filtered("  ignoreCount = %d\n",
-                             req->changeBreakpoint.request->ignoreCount);
-             break;
-           }
-         break;
-       case BreakConditionRType:
-         execute_command_1(1, queue, "condition %d %.*s",
-                         req->breakCondition.request->breakpointId,
-                         req->breakCondition.condition.byteLen,
-                         req->breakCondition.condition.text);
-         break;
-       case BreakCommandsRType:
-         /* Put pointers to where cadillac_command_line_input() can find
-            them. */
-         doing_breakcommands_message = 1;
-         command_line_length = req->breakCommands.commands.byteLen;
-         command_line_text = req->breakCommands.commands.text;
-         execute_command_1(1, queue, "commands %d",
-                           req->breakCommands.request->breakpointId);
-         command_line_text = (char *)NULL;
-         command_line_length = 0;
-         doing_breakcommands_message = 0;
-         break;
-       case ShowValueRType:
-         {
-           char expr[100], *p = expr;
-
-           expr[0] = 0;
-
-           if (req->showValue.request->ref_type == CValuePointerRef)
-             strcat(expr, "* ");
-
-           if (req->showValue.type_cast.byteLen)
-             {
-               strcat(expr, "(");
-               strncat(expr, req->showValue.type_cast.text,
-                       req->showValue.type_cast.byteLen);
-               strcat(expr, ") ");
-             }
-
-           if (req->showValue.field.byteLen)
-             strcat(expr, "(");
-
-           strncat(expr, req->showValue.expression.text,
-                   req->showValue.expression.byteLen);
-
-           if (req->showValue.field.byteLen)
-             {
-               strcat(expr, ")");
-
-               strncat(expr, req->showValue.field.text,
-                       req->showValue.field.byteLen);
-             }
-
-           execute_command_1(1, queue, "print %s", expr);
-         }
-         break;
-       case SetValueRType:
-         {
-           char expr[100], *p = expr;
-
-           expr[0] = 0;
-
-           if (req->setValue.request->ref_type == CValuePointerRef)
-             strcat(expr, "* ");
-
-#if 0
-           if (req->setValue.type_cast.byteLen)
-             {
-               strcat(expr, "(");
-               strncat(expr, req->setValue.type_cast.text,
-                       req->setValue.type_cast.byteLen);
-               strcat(expr, ") ");
-             }
-#endif
-           if (req->setValue.field.byteLen)
-             strcat(expr, "(");
-
-           strncat(expr, req->setValue.expression.text,
-                   req->setValue.expression.byteLen);
-
-           if (req->setValue.field.byteLen)
-             {
-               strcat(expr, ")");
-
-               strncat(expr, req->setValue.field.text,
-                       req->setValue.field.byteLen);
-             }
-
-           execute_command_1(1, queue, "print %s = (%s) %s", expr,
-                             req->setValue.type_cast.text,
-                             req->setValue.value.text);
-         }
-         break;
-       default:
-         fprintf(stderr, "Unknown request type = %d\n",
-                 req->head.request->reqType);
-         break;
-       }
-      free (req); /* Should probably call CVFreeDebuggerRequest() here, but
-                    can't do so if interrupt level has mucked with req->
-                    request.  CVFreeDebuggerRequest() only ends up calling
-                    free() anyway! */
-    }
-}
-\f
-/* Return a bitmask indicating if the kernel or the pty did something
-   interesting.  Set poll to non-zero if you don't want to wait.  */
-
-static int
-wait_for_events(poll)
-     int poll;
-{
-  fd_set readfds;
-  int numfds;
-  int eventmask = 0;
-  static struct timeval tv = {0};
-
-  /* Output all pending requests. */
-  CWriteRequestBuffer(conn);
-
-  FD_ZERO(&readfds);
-
-  /* Wait till there's some activity from the kernel or the pty. */
-  do
-    {
-      FD_SET(kerfd, &readfds);
-      if (inferior_pty > 0)
-       FD_SET(inferior_pty, &readfds);
-      if (poll)
-       numfds = select(sizeof(readfds)*8, &readfds, 0, 0, &tv);
-      else
-       numfds = select(sizeof(readfds)*8, &readfds, 0, 0, 0);
-    }
-  while (numfds <= 0 && !poll);
-
-  if (FD_ISSET(inferior_pty, &readfds))
-    eventmask |= PTY_EVENT;
-
-  if (FD_ISSET(kerfd, &readfds))
-    eventmask |= KERNEL_EVENT;
-
-  return eventmask;
-}
-\f
-/* This is called from read_command_lines() to provide the text for breakpoint
-   commands, which is supplied in a BreakCommands message.  Each call to this
-   routine supplies a single line of text, with the newline removed. */
-
-/* This routine may be invoked in two different contexts.  In the first, it
-   is being called as a result of the BreakCommands message.  In this case,
-   all of the command text is immediately available.  In the second case, it is
-   called as a result of the user typing the 'command' command.  The command
-   text then needs to be glommed out of UserInput messages (and possibly other
-   messages as well).  The most 'straighforward' way of doing this is to
-   basically simulate the main loop, but just accumulate the command text
-   instead of sending it to execute_command().  */
-
-char *
-cadillac_command_line_input()
-{
-  char *p;
-
-  if (doing_breakcommands_message)
-    {
-      if (command_line_length <= 0)
-       return (char *)NULL;
-
-      p = command_line_text;
-
-      while (command_line_length-- > 0)
-       {
-         if (*command_line_text == '\n')
-           {
-             *command_line_text = '\000';
-             command_line_text++;
-             break;
-           }
-         command_line_text++;
-       }
-
-      printf_filtered("%s\n", p);
-      return p;
-    }
-  else
-    {
-      /* We come here when the user has typed the 'command' or 'define' command
-        to the GDB window.  We are basically deep inside of the 'command'
-        command processing routine right now, and will be called to get a new
-        line of input.  We expect that kernel_dispatch will queue up only one
-        command at a time. */
-
-      int eventmask;
-      static char buf[100];
-      
-      eventmask = wait_for_events(0);
-
-      if (eventmask & PTY_EVENT)
-       pty_to_kernel();
-
-      if (eventmask & KERNEL_EVENT)
-       kernel_dispatch(1);     /* Queue up commands */
-
-/* Note that command has been echoed by the time we get here */
-
-      p = dequeue_command();
-
-      if (p)
-       {
-         strncpy(buf, p, sizeof(buf));
-         free(p);
-         return buf;
-       }
-      else
-       return NULL;
-    }
-}
-\f
-/* Establish contact with the kernel. */
-
-void
-cadillac_initialize(cadillac_id, execarg)
-     char *cadillac_id;
-     char *execarg;
-{
-  CTtyRequest *req;
-  char *ctmp;
-  extern long strtol(char *str, char **ptr, int base);
-  char pathname[MAXPATHLEN];
-  int n;
-
-  if (!execarg) execarg = "";
-
-  printf("gdb-debugger pid=%d\n", getpid()); /* XXX - debugging only */
-  
-  /* First establish the connection with the kernel. */
-
-  kerfd = COpenClientSocket(NULL);
-  if (kerfd < 0) {
-    printf("COpenClientSocket() failed\n");
-    exit(1);
-  }
-
-  /* Setup for I/O interrupts when appropriate. */
-
-  n = fcntl(kerfd, F_GETFL, 0);
-  fcntl(kerfd, F_SETFL, n|FASYNC);
-  fcntl(kerfd, F_SETOWN, getpid());
-
-  /* Setup connection buffering. */
-
-  CSetSocketBufferSize (kerfd, 12000);
-
-  /* Generate a new connection control block. */
-
-  conn = NewConnection (0, kerfd, kerfd);
-  if (!conn) {
-    printf("NewConnection() failed\n");
-    exit(1);
-  }
-
-#ifdef KERNEL_RECORD
-  kerout = fopen("kernel.output", "+w");
-
-  CReadWriteHooks(conn, conn->previewMethod, conn->readMethod, kernel_record);
-#endif
-
-  /* Tell the kernel that we are the "debugger". */
-
-  req = CWriteTtyRequest (conn, QueryConnectionRType);
-  req->generic.queryconnection.major = 0;
-  req->generic.queryconnection.minor = 0;
-  req->generic.queryconnection.cadillacId1=strtol(cadillac_id, &ctmp, 16);
-  req->generic.queryconnection.cadillacId2 = strtol(++ctmp, NULL, 16);
-  req->generic.queryconnection.nProtocols = 1;
-  CWriteProtocol (conn, 0, 0, "debugger");
-  CWriteLength (conn);
-
-  /* Tell the kernel that we are actually running. */
-
-  /* KROCK ALERT!!!  The kernel doesn't really care about the arguments to
-     the program at all!  It only cares that argument 7 be the name of the
-     target program.  So, we just fill in the rest of the slots with
-     padding.  I hope the kernel never cares about this! */
-
-  req = CWriteTtyRequest (conn, RunningProgramRType);
-  req->runningprogram.argc = 8;
-  getwd (pathname);
-  CWriteVstring0 (conn, pathname);
-
-  CWriteVstring0 (conn, "0");
-  CWriteVstring0 (conn, "1");
-  CWriteVstring0 (conn, "2");
-  CWriteVstring0 (conn, "3");
-  CWriteVstring0 (conn, "4");
-  CWriteVstring0 (conn, "5");
-  CWriteVstring0 (conn, "6");
-  CWriteVstring0 (conn, execarg);
-  CWriteLength (conn);
-
-  /* Tell the kernel our PID and all that */
-
-  program_id = 1;
-  CVWriteDebugProgramInfo(conn,
-                         getpid(),
-                         program_id,
-                         execarg,
-                         "");
-
-  /* Tell the rest of the world that Cadillac is now set up. */
-  cadillac = 1;
-
-  setsid();                    /* Drop controlling tty, become pgrp master */
-  getpty();                    /* Setup the pty */
-  dup2(inferior_tty, 0);       /* Attach all GDB I/O to the pty */
-  dup2(inferior_tty, 1);
-  dup2(inferior_tty, 2);
-}
-
-/* This is called from execute_command, and provides a wrapper around
-   various command routines in a place where both protocol messages and
-   user input both flow through.
-*/
-
-void
-cadillac_call_command(cmdblk, arg, from_tty)
-     struct cmd_list_element *cmdblk;
-     char *arg;
-     int from_tty;
-{
-  if (cmdblk->class == class_run)
-    {
-      go_busy();
-      has_run = 1;
-      (*cmdblk->function.cfunc)(arg, from_tty);
-      send_status();
-    }
-  else
-    (*cmdblk->function.cfunc)(arg, from_tty);
-
-  print_prompt();
-}
-
-void
-cadillac_new_process()
-{
-  instance_id = inferior_pid;
-}
-
-static void
-iosig(signo)
-     int signo;
-{
-  while (1)
-    {
-      int eventmask;
-
-      eventmask = wait_for_events(1);
-
-      if (eventmask == 0)
-       return;
-
-      if (eventmask & PTY_EVENT)
-       pty_to_kernel();
-
-      if (eventmask & KERNEL_EVENT)
-       kernel_dispatch(1);
-    }
-}
-
-int
-cadillac_wait(status)
-     int *status;
-{
-  int pid;
-
-  signal(SIGIO, iosig);
-
-  pid = wait(status);
-
-  signal(SIGIO, SIG_DFL);
-  return pid;
-}
-
-static void
-null_routine(arg)
-     int arg;
-{
-}
-
-/* All requests from the Cadillac kernel eventually end up here. */
-
-void
-cadillac_main_loop()
-{
-  CTtyRequest *req;
-  struct cleanup *old_chain;
-
-  doing_breakcommands_message = 0;
-
-/* We will come thru here any time there is an error, so send status if
-   necessary. */
-
-  send_status();
-
-  print_prompt();
-
-  /* The actual event loop! */
-
-  while (1)
-    {
-      int eventmask;
-      char *cmd;
-
-      old_chain = make_cleanup(null_routine, 0);
-
-/* First, empty out the command queue, then check for new requests. */
-
-      while (cmd = dequeue_command())
-       {
-         execute_command_1(1, 0, cmd);
-         free(cmd);
-       }
-
-      eventmask = wait_for_events(0);
-
-      if (eventmask & PTY_EVENT)
-       pty_to_kernel();
-
-      if (eventmask & KERNEL_EVENT)
-       kernel_dispatch(0);
-
-      bpstat_do_actions(&stop_bpstat);
-      do_cleanups(old_chain);
-    }
-}
diff --git a/gdb/config.gdb b/gdb/config.gdb
deleted file mode 100755 (executable)
index c380fe4..0000000
+++ /dev/null
@@ -1,180 +0,0 @@
-#!/bin/sh
-
-# Shell script to do machine-dependent things in
-# preparation for compiling gdb.
-#
-# Usage: config.gdb machine
-#
-# If config.gdb succeeds, it leaves its status in config.status.
-# If config.gdb fails after disturbing the status quo, 
-#      config.status is removed.
-
-progname=$0
-host=
-target=
-list_hosts=
-list_targets=
-srcdir=
-
-for arg in $*; do
-  case $arg in
-    -srcdir=*|+srcdir=*)
-      srcdir=`echo $arg | sed 's/[+-]srcdir=//'`
-      ;;
-    -host|+host)
-      list_hosts=true
-      ;;
-    -target|+target)
-      list_targets=true
-      ;;
-    -host=*|+host=*)
-      if [ "$host" = "" ]; then
-        host=`echo $arg | sed 's/[+-]host=//'`
-      else
-        echo Error: Attempt to specify host machine twice
-        bad=true
-      fi
-      ;;
-    -target=*|+target=*)
-      if [ "$target" = "" ]; then
-        target=`echo $arg | sed 's/[+-]target=//'`
-      else
-        echo Error: Attempt to specify target machine twice
-        bad=true
-      fi
-      ;;
-    *)
-      if [ "$host" = "" ]; then
-       host=$arg
-      else
-        if [ "$target" = "" ]; then
-          target=$arg
-        else
-          echo Error: More arguments than host and target machine names
-         bad=true
-        fi
-      fi
-      ;;
-  esac
-done
-
-if [ "$target" = "" ]; then target=$host; fi
-if [ "$host" = "" ]; then bad=true; fi
-
-# Find the source files, if location was not specified
-if [ "$srcdir" = "" ]; then
-  srcdirdefaulted=true
-  srcdir=.
-  if [ ! -r main.c ]; then
-    srcdir=..
-  fi
-fi
-if [ ! -r ${srcdir}/main.c ]; then
-  if [ "$srcdirdefaulted" != "true" ]; then
-    echo "$progname: Can't find debugger sources in \`${srcdir}'." 1>&2
-  else
-    echo "$progname: Can't find debugger sources in \`.' or \`..'." 1>&2
-  fi
-  exit 1
-fi
-
-if [ "$list_hosts" = "true" ]; then
-  cd $srcdir/xconfig
-  for i in * ; do
-# The {} in ${i} are required or else /bin/sh in sony newsos 3.2 removes
-# the quote after it.
-  awk <$i "NR == 1 { lastchar = substr(\"${i}\", length(\"${i}\"), 1)
-if (lastchar != \"~\" && lastchar != \"#\") \
-printf \"%-12s %s\n\", \"${i}\", substr(\$0,2) }"
-  done
-fi
-
-if [ "$list_targets" = "true" ]; then
-  cd $srcdir/tconfig
-  for i in * ; do
-  awk <$i "NR == 1 { lastchar = substr(\"${i}\", length(\"${i}\"), 1)
-if (lastchar != \"~\" && lastchar != \"#\") \
-printf \"%-12s %s\n\", \"${i}\", substr(\$0,2) }"
-  done
-fi
-
-if [ "$list_hosts" = "true" -o "$list_targets" = "true" ]; then
-  exit 0
-fi
-
-if [ "$host" != "" -a ! -f $srcdir/xconfig/$host ]; then
-  echo "No such host $host"
-  bad=true
-fi
-
-if [ "$target" != "" -a ! -f $srcdir/tconfig/$target ]; then
-  echo "No such target $target"
-  bad=true
-fi
-
-if [ "$bad" = "true" ] ; then
-  echo "Usage: "
-  echo "  $progname [+srcdir=\`dir'] machine"
-  echo "    For normal usage"
-  echo "  $progname [+srcdir=\`dir'] \`host' \`target'"
-  echo "  $progname [+srcdir=\`dir'] +host=\`host' +target=\`target'"
-  echo "    If you are doing remote debugging between machines of two"
-  echo "    different types (cross-debugging).  \`host' is the type of"
-  echo "    machine on which GDB will be running.  \`target' is the"
-  echo "    machine that the program you are debugging will be"
-  echo "    running on."
-  echo "  $progname +host"
-  echo "    Print a list of valid host machine types."
-  echo "  $progname +target"
-  echo "    Print a list of valid target machine types."
-  echo
-  echo "  +srcdir=\`dir' means that the sources are in \`dir'.  For"
-  echo "    example, \`cd /obj/hp300; config.gdb +srcdir=/src/gdb hp300'"
-  echo "    If +srcdir is not specified, sources can either be in \`.'"
-  echo "    or \`..'."
-  echo
-
-  if [ -r config.status ]
-  then
-    cat config.status
-  fi
-  exit 1
-fi
-
-rm -f tm.h xm.h
-
-cat $srcdir/xconfig/$host $srcdir/tconfig/$target | awk '$1 == "#msg" {
-  print substr($0,6)}'
-paramfile=${srcdir}/`awk '
-  $1 == "TM_FILE=" { print $2 }' <$srcdir/tconfig/$target`
-if [ "$paramfile" != "${srcdir}/" ] ; then
-  # Make a symlink if possible, otherwise try a hard link
-  ln -s $paramfile tm.h 2>/dev/null || ln $paramfile tm.h
-fi
-
-paramfile=${srcdir}/`awk '
-  $1 == "XM_FILE=" { print $2 }' <$srcdir/xconfig/$host`
-if [ "$paramfile" != "${srcdir}/" ] ; then
-  # Make a symlink if possible, otherwise try a hard link
-  ln -s $paramfile xm.h 2>/dev/null || ln $paramfile xm.h
-fi
-
-rm -f config.status
-
-case ${srcdir} in
-  .)
-    ;;
-  *)
-    echo "srcdir=${srcdir}" >./Makefile.sdir
-    grep -s "source ${srcdir}/.gdbinit" .gdbinit 2>/dev/null || \
-      echo "source ${srcdir}/.gdbinit" >> .gdbinit
-esac
-
-rm -f Makefile
-make "srcdir=${srcdir}" \
-  "M_MAKEFILE=$srcdir/tconfig/$target $srcdir/xconfig/$host" \
-  -f $srcdir/Makefile.dist Makefile
-
-echo "GDB is now set up for host machine $host and target machine $target." \
-       | tee config.status
-exit 0
diff --git a/gdb/config.status b/gdb/config.status
deleted file mode 100755 (executable)
index ec87176..0000000
+++ /dev/null
@@ -1 +0,0 @@
-GDB is now set up for host machine none and target machine none.
index dac9ab8..e69de29 100755 (executable)
@@ -1,446 +0,0 @@
-#!/bin/sh
-
-# Configuration subroutine to validate and canonicalize a configuration type.
-# Supply the specified configuration type as an argument.
-# If it is invalid, we print an error message on stderr and exit with code 1.
-# Otherwise, we print the canonical config type on stdout and succeed.
-
-# This file is supposed to be the same for all GNU packages
-# and recognize all the CPU types, system types and aliases
-# that are meaningful with *any* GNU software.
-# Each package is responsible for reporting which valid configurations
-# it does not support.  The user should be able to distinguish
-# a failure to support a valid configuration from a meaningless
-# configuration (e.g. a typo).
-
-# Please email any bugs, comments, and/or additions to this file to:
-# configure@cygnus.com
-
-# decode aliases into canonical names
-
-case "$1" in
-# cpu alone is a valid alias for cpu-none-none.
-vax | tahoe | i386 | i860 | m68k | m68000 | m88k | sparc | ns32k \
-       | alliant | arm | c1 | c2 | mips | pyramid | tron | a29k \
-       | romp | rs6000 | i960 | h8300)
-       cpu=$1
-       vendor=none
-       os=none
-       ;;
-altos | altos3068)
-       cpu=m68k
-       vendor=altos
-       os=sysv # maybe?
-       ;;
-altosgas)
-       cpu=m68k
-       vendor=altos
-       os=gas
-       ;;
-am29k)
-       cpu=a29k
-       vendor=none
-       os=bsd
-       ;;
-amdahl)
-       cpu=580
-       vendor=amdahl
-       os=uts
-       ;;
-amigados)
-       cpu=m68k
-       vendor=cbm
-       os=amigados # Native AmigaDOS
-       ;;
-amigaunix | amix)
-       cpu=m68k
-       vendor=cbm
-       os=svr4 # System V Release 4 (svr4 is an industry recognized acronym)
-       ;;
-apollo68)
-       cpu=m68k
-       vendor=apollo
-       os=sysv # maybe?
-       ;;
-balance)
-       cpu=ns32k
-       vendor=sequent
-       os=dynix
-       ;;
-convex-c1)
-       cpu=c1
-       vendor=convex
-       os=sysv # maybe?
-       ;;
-convex-c2)
-       cpu=c2
-       vendor=convex
-       os=sysv # maybe?
-       ;;
-cray | ymp)
-       cpu=ymp
-       vendor=cray
-       os=unicos
-       ;;
-cray2)
-       cpu=cray2
-       vendor=cray
-       os=unicos
-       ;;
-dec3100 | decstatn | decstation | decstation-3100 | pmax | pmin)
-       cpu=mips
-       vendor=dec
-       os=ultrix
-       ;;
-delta | 3300 | motorola-3300 | motorola-delta \
-      | 3300-motorola | delta-motorola)
-       cpu=m68k
-       vendor=motorola
-       os=sysv # maybe?
-       ;;
-
-delta88)
-       cpu=m88k
-       vendor=motorola
-       os=m88kbcs
-       ;;
-
-gmicro)
-       cpu=tron
-       vendor=gmicro
-       os=sysv # maybe?
-       ;;
-
-h8300hds)
-       cpu=h8300
-       vendor=hitachi
-       os=hds
-       ;;
-
-# start-sanitize-v9
-hal-32 | hal32)
-       cpu=sparc64
-       vendor=hal
-       os=hal32
-       ;;
-hal-64 | hal64)
-       cpu=sparc64
-       vendor=hal
-       os=hal64
-       ;;
-sparc64)
-       cpu=sparc64
-       vendor=sun
-       os=v9
-       ;;
-sparc64-v7 | sparc64v7)
-       cpu=sparc64
-       vendor=sun
-       os=v7
-       ;;
-# end-sanitize-v9
-hp300bsd)
-       cpu=m68k
-       vendor=hp
-       os=bsd
-       ;;
-hp300hpux | hpux | hp9k3[2-9][0-9])
-       cpu=m68k
-       vendor=hp
-       os=hpux
-       ;;
-hp9k31[0-9] | hp9k2[0-9][0-9])
-       cpu=m68000
-       vendor=hp
-       os=hpux
-       ;;
-i386sco)
-       cpu=i386
-       vendor=sco
-       os=sysv # maybe?
-       ;;
-i386v)
-       cpu=i386
-       vendor=none
-       os=sysv
-       ;;
-i386v32)
-       cpu=i386
-       vendor=none
-       os=sysv32
-       ;;
-iris | iris4d)
-       cpu=mips
-       vendor=sgi
-       os=irix # maybe?
-       ;;
-
-dpx2)
-       vendor=bull
-       cpu=m68k
-       os=sysv
-       ;;
-isi | isi68)
-       cpu=m68k
-       vendor=isi
-       os=sysv # maybe?
-       ;;
-littlemips)
-       cpu=mips
-       vendor=little
-       os=bsd
-       ;;
-magnum | m3230)
-       cpu=mips
-       vendor=mips
-       os=sysv # maybe?
-       ;;
-merlin)
-       cpu=ns32k
-       vendor=utek
-       os=sysv # maybe?
-       ;;
-miniframe)
-       cpu=m68000
-       vendor=convergent
-       os=sysv # maybe?
-       ;;
-mmax)
-       cpu=ns32k
-       vendor=encore
-       os=sysv # maybe?
-       ;;
-news | news700 | news800 | news900)
-       cpu=m68k
-       vendor=sony
-       os=newsos3 # Based on bsd-4.3
-       ;;
-news1000)
-       cpu=m68030
-       vendor=sony
-       os=newsos3 # ?
-       ;;
-news-3600 | bigmips | risc-news)
-       cpu=mips
-       vendor=sony
-       os=newsos4 # Presumably?
-       ;;
-next)
-       cpu=m68k
-       vendor=next
-       os=sysv # maybe?
-       ;;
-nindy960)
-       cpu=i960
-       vendor=intel
-       os=nindy
-       ;;
-none)
-       cpu=none
-       vendor=none
-       os=none
-       ;;
-np1)
-       cpu=np1
-       vendor=gould
-       os=sysv # maybe?
-       ;;
-rtpc)
-       cpu=romp
-       vendor=ibm
-       os=aix # maybe?
-       ;;      
-pbd)
-       cpu=sparc
-       vendor=unicom
-       os=sysv
-       ;;
-pn)
-       cpu=pn
-       vendor=gould
-       os=sysv # maybe?
-       ;;
-ps2)
-       cpu=i386
-       vendor=ibm
-       os=sysv # maybe?
-       ;;
-sun2)
-       cpu=m68000
-       vendor=sun
-       os=sunos4
-       ;;
-sun2os3)
-       cpu=m68000
-       vendor=sun
-       os=sunos3
-       ;;
-sun2os4)
-       cpu=m68000
-       vendor=sun
-       os=sunos4
-       ;;
-sun3)
-       cpu=m68k
-       vendor=sun
-       os=sunos4
-       ;;
-sun3os3)
-       cpu=m68k
-       vendor=sun
-       os=sunos3
-       ;;
-sun3os4)
-       cpu=m68k
-       vendor=sun
-       os=sunos4
-       ;;
-sun386 | roadrunner | sun386i)
-       cpu=i386
-       vendor=sun
-       os=sunos
-       ;;
-sun4)
-       cpu=sparc
-       vendor=sun
-       os=sunos4
-       ;;
-sun4os3)
-       cpu=sparc
-       vendor=sun
-       os=sunos3
-       ;;
-sun4os4)
-       cpu=sparc
-       vendor=sun
-       os=sunos4
-       ;;
-symmetry)
-       cpu=i386
-       vendor=sequent
-       os=dynix
-       ;;
-tower | tower-32)
-       cpu=m68k
-       vendor=ncr
-       os=sysv # maybe?
-       ;;
-ultra3)
-       cpu=a29k
-       vendor=nyu
-       os=sym1
-       ;;
-umax)
-       cpu=ns32k
-       vendor=encore
-       os=sysv # maybe?
-       ;;
-unixpc | safari | pc7300 | 3b1 | 7300 | 7300-att | att-7300)
-       cpu=m68k
-       vendor=att
-       os=sysv # maybe?
-       ;;
-vax-dec)
-       cpu=vax
-       vendor=dec
-       os=ultrix # maybe?
-       ;;
-vxworks68)
-       cpu=m68k
-       vendor=wrs
-       os=vxworks
-       ;;
-vxworks960)
-       cpu=i960
-       vendor=wrs
-       os=vxworks
-       ;;
-xmp)
-       cpu=xmp
-       vendor=cray
-       os=unicos
-       ;;
-# not an alias.  parse what we expect to be a canonical name.
-*)
-       cpu=`echo $1 | sed 's/-.*$//'`
-
-       if [ "${cpu}" = "$1" ] ; then
-               # no vendor so this is an invalid name.
-               echo '***' No vendor: configuration \`$1\' not recognized 1>&2
-               exit 1
-       else
-               # parse out vendor
-               rest=`echo $1 | sed "s/${cpu}-//"`
-               vendor=`echo ${rest} | sed 's/-.*$//'`
-
-               if [ "${vendor}" = "${rest}" ] ; then
-                       # a missing os is acceptable
-                       os=none
-               else
-                       os=`echo ${rest} | sed "s/${vendor}-//"`
-               fi
-       fi
-       ;;
-esac
-
-# At this point we should have three parts of a canonical name in cpu,
-# vendor, and os.
-
-# verify that the cpu is known.
-
-case "${cpu}" in
-none | vax | tahoe | i386 | i860 | m68k | m68000 | m88k | sparc \
-       | ns32k | alliant | arm | c1 | c2 | mips | pyramid | tron \
-       | a29k | romp | rs6000 | i960 | xmp | ymp | cray2 | 580 | h8300)
-       ;;
-
-# start-sanitize-v9
-sparc64) ;;
-# end-sanitize-v9
-
-*)
-       echo '***' Invalid cpu \`${cpu}\': configuration \`$1\' not recognized 1>&2
-       exit 1
-       ;;
-esac
-
-# verify that the vendor is known.
-
-case "${vendor}" in
-       altos | amdahl | aout | apollo | att | bcs | bout |\
-       cbm | convergent | convex | coff | cray | dec | encore |\
-       gould | hitachi | intel | isi | hp | ibm | little | mips | motorola |\
-       ncr | next | none | nyu | sco | sequent | sgi | sony | sun |\
-       unicom | utek | wrs | bull ) ;; 
-
-# start-sanitize-v9
-hal) ;;
-# end-sanitize-v9
-
-*)
-       echo '***' Invalid vendor \`${vendor}\': configuration \`$1\' not recognized 1>&2
-       exit 1
-       ;;
-esac
-
-# verify that the os is known, if it exists.
-
-case "${os}" in
-aix* | aout | bout | bsd* | coff | ctix* | dynix* | esix* | hpux* \
-       | hds | irix* | isc* | kern | mach* | newsos* | nindy* | none \
-       | osf* | sco* | sunos* | sysv* | ultrix* | unos* | v88r* \
-       | vms* | vxworks* | sym[1-9]* | unicos* | uts | svr4 \
-       | amigados) 
-       ;;
-
-# start-sanitize-v9
-hal32 | hal64 | v7 | v9) ;;
-# end-sanitize-v9
-
-*)
-       echo '***' Invalid os \`${os}\': configuration \`$1\' not recognized 1>&2
-       exit 1
-       ;;
-esac
-
-echo ${cpu}-${vendor}-${os}
diff --git a/gdb/config/altosgas.mh b/gdb/config/altosgas.mh
deleted file mode 100644 (file)
index b9b231a..0000000
+++ /dev/null
@@ -1,9 +0,0 @@
-# Host: Altos 3068 (68k, System V release 2), using COFF encapsulation
-#msg Use of the coff encapsulation features require the GNU binutils utilities
-#msg To be ahead of their System V counterparts in your path.
-
-XDEPFILES= infptrace.o altos-xdep.o
-XM_FILE= xm-altos.h
-REGEX=regex.o
-REGEX1=regex.o
-SYSV_DEFINE=-DSYSV
diff --git a/gdb/config/altosgas.mt b/gdb/config/altosgas.mt
deleted file mode 100644 (file)
index 7c2912e..0000000
+++ /dev/null
@@ -1,7 +0,0 @@
-# Target: Altos 3068 (68k, System V release 2), using COFF encapsulation
-
-#msg Use of the coff encapsulation features require the GNU binutils utilities
-#msg To be ahead of their System V counterparts in your path.
-
-TDEPFILES= m68k-pinsn.o exec.o
-TM_FILE= tm-altosgas.h
diff --git a/gdb/config/am29k b/gdb/config/am29k
deleted file mode 100755 (executable)
index 562e43f..0000000
+++ /dev/null
@@ -1,5 +0,0 @@
-# Target: AMD 29000 on EB29K board over a serial line.
-TDEPFILES= exec.o am29k-pinsn.o remote-eb.o am29k-tdep.o
-TM_FILE= tm-29k.h
-# The following is for ../include/a.out.encap.h
-TM_CFLAGS = -DCOFF_ENCAPSULATE -DTARGET=TARGET_AM29K
diff --git a/gdb/config/go32.mt b/gdb/config/go32.mt
deleted file mode 100644 (file)
index a37facd..0000000
+++ /dev/null
@@ -1,10 +0,0 @@
-
-
-fishall:
-       echo "Can't make GDB for go32 (yet :) "
-       touch $(OBS)
-       touch $(RAPP_OBS)
-       touch $(TSOBS)
-       touch $(NTSSTART)
-       touch gdb
-       
diff --git a/gdb/config/i386sco.mt b/gdb/config/i386sco.mt
deleted file mode 100644 (file)
index 720eea2..0000000
+++ /dev/null
@@ -1,3 +0,0 @@
-# Target: Intel 386 running SCO Unix (pre-SVR4)
-TDEPFILES= exec.o i386-tdep.o i386-pinsn.o
-TM_FILE= tm-i386v.h
diff --git a/gdb/config/i386v-g.mh b/gdb/config/i386v-g.mh
deleted file mode 100644 (file)
index 2316ffb..0000000
+++ /dev/null
@@ -1,7 +0,0 @@
-# Host: Intel 386 running System V, using COFF encapsulation
-XDEPFILES= infptrace.o coredep.o i386-xdep.o i387-tdep.o
-XM_FILE= xm-i386v.h
-XM_CLIBS= -lPW
-SYSV_DEFINE=-DSYSV
-REGEX=regex.o
-REGEX1=regex.o
diff --git a/gdb/config/i386v-g.mt b/gdb/config/i386v-g.mt
deleted file mode 100644 (file)
index cd07b5c..0000000
+++ /dev/null
@@ -1,7 +0,0 @@
-# Target: Intel 386 running System V, using COFF encapsulation
-
-#msg Use of the COFF encapsulation features requires the GNU binary utilities
-#msg to be ahead of their System V counterparts in your path.
-
-TDEPFILES= exec.o i386-tdep.o i386-pinsn.o
-TM_FILE= tm-i386v-g.h
diff --git a/gdb/config/i386v32-g.mh b/gdb/config/i386v32-g.mh
deleted file mode 100644 (file)
index 0349512..0000000
+++ /dev/null
@@ -1,7 +0,0 @@
-# Host: Intel 386 running System V release 3.2, using COFF encapsulation
-XDEPFILES= infptrace.o coredep.o i386-xdep.o i387-tdep.o
-XM_FILE= xm-i386v32.h
-XM_CLIBS= -lPW
-SYSV_DEFINE=-DSYSV
-REGEX=regex.o
-REGEX1=regex.o
diff --git a/gdb/config/i386v32-g.mt b/gdb/config/i386v32-g.mt
deleted file mode 100644 (file)
index e2cd6b4..0000000
+++ /dev/null
@@ -1,7 +0,0 @@
-# Target: Intel 386 running System V release 3.2, using COFF encapsulation
-
-#msg Use of the COFF encapsulation features requires the GNU binary utilities
-#msg to be ahead of their System V counterparts in your path.
-
-TDEPFILES= exec.o i386-tdep.o i386-pinsn.o
-TM_FILE= tm-i386v-g.h
diff --git a/gdb/config/i386v32.mt b/gdb/config/i386v32.mt
deleted file mode 100644 (file)
index 1ca4cae..0000000
+++ /dev/null
@@ -1,4 +0,0 @@
-# Target: Intel 386 running System V release 3.2
-TDEPFILES= exec.o i386-tdep.o i386-pinsn.o
-TM_FILE= tm-i386v.h
-MT_CFLAGS=
diff --git a/gdb/config/i960.mt b/gdb/config/i960.mt
deleted file mode 100644 (file)
index f6a7556..0000000
+++ /dev/null
@@ -1,5 +0,0 @@
-# Target: Intel 80960, under NINDY or under VxWorks, selected at runtime.
-#msg
-#msg You must specify either "nindy960" or "vxworks960"; there is no
-#msg generic i960 target any more.
-#msg
diff --git a/gdb/config/mh-vax b/gdb/config/mh-vax
deleted file mode 100755 (executable)
index 79ecb09..0000000
+++ /dev/null
@@ -1,12 +0,0 @@
-# Host: DEC VAX running BSD or Ultrix
-# The following types of /bin/cc failures have been observed:
-# 1.  Something in readline.c which I have never seen
-# 2.  ``"values.c", line 816: compiler error: schain botch''
-#msg /bin/cc has been known to fail on VAXen running BSD4.3
-#msg If this occurs, use gcc
-#msg  (but see comments in Makefile.dist about compiling with gcc).
-
-XDEPFILES= infptrace.o coredep.o
-REGEX=regex.o
-REGEX1=regex.o
-XM_FILE= xm-vax.h
diff --git a/gdb/config/mt-h8300hds b/gdb/config/mt-h8300hds
deleted file mode 100755 (executable)
index fbc6ac9..0000000
+++ /dev/null
@@ -1,4 +0,0 @@
-# Target: H8300 with HDS monitor 
-TDEPFILES= exec.o h8300-tdep.o  hds-tdep.o
-TM_FILE= tm-h8300.h
-TM_CFLAGS=
diff --git a/gdb/config/news1000.mt b/gdb/config/news1000.mt
deleted file mode 100644 (file)
index ca16e59..0000000
+++ /dev/null
@@ -1,3 +0,0 @@
-# Target: Sony news series 1000 (68030) running NewsOS version 3.
-TDEPFILES= m68k-pinsn.o exec.o
-TM_FILE= tm-news.h
diff --git a/gdb/config/sun3.mh b/gdb/config/sun3.mh
deleted file mode 100644 (file)
index 4ec8d54..0000000
+++ /dev/null
@@ -1,3 +0,0 @@
-# Host: Sun 3, running SunOS 4
-XDEPFILES= infptrace.o sun3-xdep.o
-XM_FILE= xm-sun3os4.h
diff --git a/gdb/config/sun3.mt b/gdb/config/sun3.mt
deleted file mode 100644 (file)
index 9c93c56..0000000
+++ /dev/null
@@ -1,8 +0,0 @@
-# Target: Sun 3, running SunOS 4, as a target system
-# The system-supplied assembler re-orders the symbols so that gdb
-# can't find "gcc_compiled.".
-#msg If you compile your program with GCC, use the GNU assembler.
-#msg
-
-TDEPFILES= exec.o m68k-pinsn.o solib.o m68k-tdep.o
-TM_FILE= tm-sun3os4.h
diff --git a/gdb/config/sun4.mh b/gdb/config/sun4.mh
deleted file mode 100644 (file)
index 1769007..0000000
+++ /dev/null
@@ -1,3 +0,0 @@
-# Host: Sun 4 or Sparcstation, running SunOS 4
-XDEPFILES= infptrace.o sparc-xdep.o ser-termios.o
-XM_FILE= xm-sun4os4.h
diff --git a/gdb/config/sun4.mt b/gdb/config/sun4.mt
deleted file mode 100644 (file)
index 39928b8..0000000
+++ /dev/null
@@ -1,3 +0,0 @@
-# Target: Sun 4 or Sparcstation, running SunOS 4
-TDEPFILES= exec.o sparc-tdep.o sparc-pinsn.o solib.o
-TM_FILE= tm-sun4os4.h
diff --git a/gdb/config/sun4os3.mh b/gdb/config/sun4os3.mh
deleted file mode 100644 (file)
index 742c9cb..0000000
+++ /dev/null
@@ -1,3 +0,0 @@
-# Host: Sun 4 or Sparcstation, running SunOS 3
-XDEPFILES= infptrace.o sparc-xdep.o
-XM_FILE= xm-sparc.h
diff --git a/gdb/config/sun4os3.mt b/gdb/config/sun4os3.mt
deleted file mode 100644 (file)
index b1890e8..0000000
+++ /dev/null
@@ -1,8 +0,0 @@
-# Target: Sun 4 or Sparcstation, running SunOS 3
-# The system-supplied assembler re-orders the symbols so that gdb
-# can't find "gcc_compiled.".
-#msg If you compile your program with GCC, use the GNU assembler.
-#msg
-
-TDEPFILES= exec.o sparc-tdep.o sparc-pinsn.o
-TM_FILE= tm-sparc.h
diff --git a/gdb/config/sun4os5.mh b/gdb/config/sun4os5.mh
deleted file mode 100755 (executable)
index 8ec7ab8..0000000
+++ /dev/null
@@ -1,29 +0,0 @@
-# Host: Sun 4 or Sparcstation, running SunOS 5
-XDEPFILES= procfs.o
-XM_FILE= xm-sun4os5.h
-SYSV_DEFINE=-DSYSV
-REGEX=regex.o
-REGEX1=regex.o
-
-# We need to find alloca() somewhere.  Gcc has one built in, but most other
-# compilers don't.  Using the one in /usr/ucblib/libucb.a is tricky because
-# we have to be careful not to pull in anything else from the library (lots
-# of things are broken in most SVR4 versions).  The best solution is to just
-# compile alloca.c and link it into the executable.  If we end up not needing
-# it, then the code is just dead.  Once alloca.c moves to libiberty, then we
-# can eliminate this semi-kludge.
-####ALLOCA=alloca.o
-####ALLOCA1=alloca.o
-
-# SVR4 comes standard with terminfo, and in some implementations, the
-# old termcap descriptions are incomplete.  So ensure that we use the
-# new terminfo interface and latest terminal descriptions.
-TERMCAP=-ltermlib
-
-# SVR4 puts the BSD compatible install in /usr/ucb.
-INSTALL = /usr/ucb/install -c
-
-# Sun's compilers require the -xs option to produce debug information
-# in the final linked executable.  Otherwise they leave it in the .o
-# files only, with undocumented pointers to it in the linked executable.
-MH_CFLAGS=-xs
diff --git a/gdb/config/sun4os5.mt b/gdb/config/sun4os5.mt
deleted file mode 100755 (executable)
index 3f797ab..0000000
+++ /dev/null
@@ -1,3 +0,0 @@
-# Target: Sun 4 or Sparcstation, running SunOS 5
-TDEPFILES= exec.o sparc-tdep.o sparc-pinsn.o solib.o
-TM_FILE= tm-sun4os5.h
diff --git a/gdb/configure b/gdb/configure
deleted file mode 100755 (executable)
index 5b73541..0000000
+++ /dev/null
@@ -1,882 +0,0 @@
-#!/bin/sh
-
-# Configuration script
-#   Copyright (C) 1988, 1990, 1991 Free Software Foundation, Inc.
-
-#This file is part of GNU.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-# 
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-# 
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-# $Id$
-
-#
-# Shell script to create proper links to machine-dependent files in
-# preparation for compilation.
-#
-# If configure succeeds, it leaves its status in config.status.
-# If configure fails after disturbing the status quo, 
-#      config.status is removed.
-#
-
-remove=rm
-hard_link=ln
-symbolic_link='ln -s'
-
-#for Test
-#remove="echo rm"
-#hard_link="echo ln"
-#symbolic_link="echo ln -s"
-
-progname=$0
-
-# clear some things potentially inherited from environment.
-ansi=
-arguments=$*
-defaulttargets=
-destdir=
-fatal=
-hostsubdir=
-Makefile=Makefile
-Makefile_in=Makefile.in
-norecursion=
-recurring=
-removing=
-srcdir=
-srctrigger=
-target=
-targets=
-commontargets=
-configdirs=
-targetsubdir=
-template=
-verbose=
-
-for arg in $*;
-do
-       case ${arg} in
-       -ansi | +a*)
-               ansi=true
-               clib=clib
-               ;;
-       -destdir=* | +destdir=* | +destdi=* | +destd=* | +dest=* | +des=* | +de=* | +d=*)
-               destdir=`echo ${arg} | sed 's/[+-]d[a-z]*=//'`
-               ;;
-       -languages=* | +languages=* | +language=* | +languag=* \
-               | +langua=* | +langu=* | +lang=* | +lan=* | +la=* \
-               | +l=*)
-               languages="${languages} `echo ${arg} | sed 's/[+-]l[a-z]*=//'`"
-               ;;
-       -gas | +g*)
-               gas=yes
-               ;;
-       -help | +h*)
-               fatal=true
-               ;;
-       -nfp | +nf*)
-               nfp=yes
-               ;;
-       -norecursion | +no*)
-               norecursion=true
-               ;;
-       -recurring | +recurring | +recurrin | +recurri | +recurr | +recur | +recu | +rec | +re)
-               recurring=true
-               ;;
-       -rm | +rm)
-               removing=${arg}
-               ;;
-#      -srcdir=* | +srcdir=* | +srcdi=* | +srcd=* | +src=* | +sr=* | +s=*)
-#              srcdir=`echo ${arg} | sed 's/[+-]s[a-z]*=//'`
-#              ;;
-       -subdirs | +f* | +su*)
-               subdirs=${arg}
-               ;;
-       -target=* | +target=* | +targe=* | +targ=* | +tar=* | +ta=*)
-               if [ -n "${targets}" ] ; then
-                       subdirs="+subdirs"
-               fi
-
-               newtargets="${targets} `echo ${arg} | sed 's/[+-]t[a-z]*=//'`"
-               targets="${newtargets}"
-               ;;
-       -template=* | +template=* | +templat=* | +templa=* | +templ=* | +temp=* | +tem=* | +te=*)
-               template=`echo ${arg} | sed 's/[+-]template=//'`
-               ;;
-       -v | -verbose | +v*)
-               verbose=${arg}
-               ;;
-       -* | +*)
-               (echo ;
-               echo "Unrecognized option: \"${arg}\"". ;
-               echo) 1>&2
-               fatal=true
-               ;;
-       *)
-               if [ -n "${hosts}" ] ; then
-                       subdirs="+subdirs"
-               fi
-
-               newhosts="${hosts} ${arg}"
-               hosts=${newhosts}
-               ;;
-       esac
-done
-
-if [ -n "${verbose}" ] ; then
-       echo `pwd`/configure $*
-fi
-
-# process host and target only if not rebuilding configure itself or removing.
-if [ -z "${template}" -a -z "${removing}" -a -z "${fatal}" ] ; then
-       # Complain if an arg is missing
-       if [ -z "${hosts}" ] ; then
-               (echo ;
-               echo "configure: No HOST specified." ;
-               echo) 1>&2
-               fatal=true
-       fi
-fi
-
-if [ -n "${fatal}" -o "${hosts}" = "help" ] ; then
-       (echo "Usage: configure HOST" ;
-       echo ;
-       echo "Options: [defaults in brackets]" ;
-       echo " +ansi            configure w/ANSI library. [no ansi lib]" ;
-       echo " +destdir=MYDIR   configure for installation into MYDIR. [/usr/local]" ;
-       echo " +subdirs         configure in subdirectories.  [in source directories]" ;
-       echo " +lang=LANG       configure to build LANG. [gcc]" ;
-       echo " +help            print this message. [normal config]" ;
-       echo " +gas             configure the compilers for use with gas. [native as]" ;
-       echo " +nfp             configure the compilers default to soft floating point. [hard float]" ;
-       echo " +norecursion     configure this directory only. [recurse]" ;
-       echo " +rm              remove this configuration. [build a configuration]" ;
-       echo " +target=TARGET   configure for TARGET.  [TARGET = HOST]" ;
-       echo " +template=TEM    rebuild configure using TEM. [normal config]" ;
-       echo ;
-       echo "Where HOST and TARGET are something like \"vax\", \"sun3\", \"encore\", etc." ;
-       echo "Asking for more than one \"+target\" implies \"+subdirs\".  Any other" ;
-       echo "options given will apply to all targets.") 1>&2
-
-       if [ -r config.status ] ; then
-               cat config.status
-       fi
-
-       exit 1
-fi
-
-#### configure.in common parts come in here.
-srcname="GDB"
-srctrigger=main.c
-
-## end of common part.
-
-# are we rebuilding config itself?
-if [ -n "${template}" ] ; then
-       if [ ! -r ${template} ] ; then
-               echo '***' "Can't find template ${template}." 1>&2
-               exit 1
-       fi
-
-# prep the template
-       sed -e '/^#### configure.in common parts come in here.$/,/^## end of common part.$/c\
-#### configure.in common parts come in here.\
-## end of common part.' \
-       -e '/^#### configure.in per-host parts come in here.$/,/^## end of per-host part.$/c\
-#### configure.in per-host parts come in here.\
-## end of per-host part.' \
-       -e '/^#### configure.in per-target parts come in here.$/,/^## end of per-target part.$/c\
-#### configure.in per-target parts come in here.\
-## end of per-target part.' \
-       -e '/^#### configure.in post-target parts come in here.$/,/^## end of post-target part.$/c\
-#### configure.in post-target parts come in here.\
-## end of post-target part.' \
-       < ${template} > template.new
-
-       if [ -r configure.in ] ; then
-               if [ -z "`grep '^# per\-host:' configure.in`" ] ; then
-                       echo '***' `pwd`/configure.in has no "per-host:" line. 1>&2
-                       exit 1
-               fi
-
-               if [ -z "`grep '^# per\-target:' configure.in`" ] ; then
-                       echo '***' `pwd`/configure.in has no "per-target:" line. 1>&2
-                       exit 1
-               fi
-
-               # split configure.in into common, per-host, per-target,
-               # and post-target parts.  Post-target is optional.
-               sed -e '/^# per\-host:/,$d' configure.in > configure.com
-               sed -e '1,/^# per\-host:/d' -e '/^# per\-target:/,$d' configure.in > configure.hst
-               if grep -s '^# post-target:' configure.in ; then
-                 sed -e '1,/^# per\-target:/d' -e '/^# post\-target:/,$d' configure.in > configure.tgt
-                 sed -e '1,/^# post\-target:/d' configure.in > configure.pos
-               else
-                 sed -e '1,/^# per\-target:/d' configure.in > configure.tgt
-                 echo >configure.pos
-               fi
-
-               # and insert them
-               sed -e '/^#### configure.in common parts come in here.$/  r configure.com' \
-                       -e '/^#### configure.in per\-host parts come in here.$/  r configure.hst' \
-                       -e '/^#### configure.in per\-target parts come in here.$/  r configure.tgt' \
-                       -e '/^#### configure.in post\-target parts come in here.$/  r configure.pos' \
-                       template.new > configure.new
-
-               rm -f configure.com configure.tgt configure.hst configure.pos
-       else
-               echo Warning: no configure.in in `pwd`
-               cat ${template} >> configure
-       fi
-
-       chmod a+x configure.new
-       rm template.new
-#      mv configure configure.old
-       mv configure.new configure
-
-       if [ -n "${verbose}" ] ; then
-               echo Rebuilt configure in `pwd`
-       fi
-
-       # Now update config.sub from the template directory.
-       if echo "$template" | grep -s 'configure$' ; then
-               cp `echo "$template" | sed s/configure$/config.sub/` ./config.sub.new
-       #       mv config.sub config.sub.old
-               mv config.sub.new config.sub
-
-               if [ -n "${verbose}" ] ; then
-                       echo Rebuilt config.sub in `pwd`
-               fi
-       fi
-
-       if [ -z "${norecursion}" ] ; then
-               # If template is relative path, make it absolute for recurring.
-               if echo "${template}" | grep -s '^/' ; then
-                  true
-               else
-                  template=`pwd`/${template}
-               fi
-
-               while [ -n "${configdirs}" ] ; do
-                       # set configdir to car of configdirs, configdirs to cdr of configdirs
-                       set ${configdirs}; configdir=$1; shift; configdirs=$*
-
-                       if [ "`echo ${configdir}.*`" != "${configdir}.*" ] ; then
-                               targetspecificdirs=${configdir}.*
-                       else
-                               targetspecificdirs=
-                       fi
-
-                       for i in ${configdir} ${targetspecificdirs} ; do
-                               if [ -d $i ] ; then
-                                       if [ -r $i/configure ] ; then
-                                               (cd $i ;
-                                                       ./configure +template=${template} ${verbose})
-                                       else
-                                               echo Warning: No configure script in `pwd`/$i
-                                       fi
-                               else
-                                       if [ -n "${verbose}" ] ; then
-                                         echo Warning: directory $i is missing.
-                                       fi
-                               fi
-                       done
-               done
-       fi
-
-       exit 0
-fi
-
-# some sanity checks on configure.in
-if [ -z "${srctrigger}" ] ; then
-       echo Warning: srctrigger not set in configure.in. `pwd` not configured.
-       exit 1
-fi
-
-for host in ${hosts} ; do
-       # Default other arg
-       if [ -z "${targets}" -o -n "${defaulttargets}" ] ; then
-               targets=${host}
-               defaulttargets=true
-       fi
-
-       host_alias=${host}
-
-       result=`/bin/sh ./config.sub ${host}`
-       host_cpu=`echo $result | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'`
-       host_vendor=`echo $result | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'`
-       host_os=`echo $result | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'`
-       host=${host_cpu}-${host_vendor}-${host_os}
-       host_makefile_frag=config/hmake-${host}
-
-#### configure.in per-host parts come in here.
-
-# map host info into gdb names.
-
-case "${host_cpu}" in
-
-m68k)
-       case "${host_vendor}" in
-       att)    gdb_host=3b1 ;;
-       altos)
-               case "${host_os}" in
-               gas)    gdb_host=altosgas ;;
-               *)      gdb_host=altos ;;       
-               esac
-               ;;
-       hp)
-               case ${host_os} in
-               hpux)   gdb_host=hp300hpux ;;
-               bsd)    gdb_host=hp300bsd ;;
-               esac
-               ;;
-
-       isi)    gdb_host=isi ;;
-       sony)   gdb_host=news ;;
-       sun)
-               case "${host_os}" in
-               sunos3) gdb_host=sun3os3 ;;
-               sunos4) gdb_host=sun3os4 ;;
-               *)      gdb_host=sun3 ;;
-               esac
-               ;;
-       esac
-       ;;
-
-m68000)
-       case "${host_vendor}" in
-       sun)
-               case "${host_os}" in
-               sunos3) gdb_host=sun2os3 ;;
-               sunos4) gdb_host=sun2os4 ;;
-               *)      gdb_host=sun2 ;;
-               esac
-       esac
-       ;;
-
-sparc)
-       case "${host_os}" in
-       sunos3) gdb_host=sun4os3 ;;
-       sunos4) gdb_host=sun4os4 ;;
-       *)      gdb_host=sun4 ;;
-       esac
-       ;;
-
-m68030)
-       case "${host_vendor}" in
-       sony)   gdb_host=news1000 ;;
-       esac
-       ;;
-
-mips)
-       case "${host_vendor}" in
-       sony)   gdb_host=bigmips ;;
-       dec)    gdb_host=dec3100 ;;
-       little) gdb_host=littlemips ;;
-       sgi)    gdb_host=irix3 ;;
-       esac
-       ;;
-
-i386)
-       case "${host_vendor}" in
-       sun)    gdb_host=sun386 ;;
-       sco)    gdb_host=i386sco ;;
-       sequent)        gdb_host=symmetry ;;
-       *)
-               case "${host_os}" in
-               sysv)   gdb_host=i386v ;;
-               sysv32) gdb_host=i386v32 ;;
-               esac
-               ;;
-       esac
-       ;;
-
-c1 | c2)       gdb_host=convex ;;
-
-ns32k)
-       case "${host_vendor}" in
-       umax)   gdb_host=umax ;;
-       esac
-       ;;
-
-romp)
-       gdb_host=rtbsd
-       ;;
-
-a29k)
-       gdb_host=ultra3
-       ;;
-
-arm | vax | m88k | merlin | none | np1 | pn | pyramid | tahoe)
-       gdb_host=${host_cpu}
-       ;;
-
-### unhandled hosts
-#altosgas
-#i386v-g
-#i386v32-g
-
-esac
-
-if [ ! -f xconfig/${gdb_host} ]; then
-       echo '***' "Gdb does not support host ${host}" 1>&2
-       exit 1
-fi
-
-#  We really shouldn't depend on there being a space after XM_FILE= ...
-hostfile=`awk '$1 == "XM_FILE=" { print $2 }' <xconfig/${gdb_host}`
-
-## end of per-host part.
-
-       for target in ${targets} ; do
-
-               target_alias=${target}
-               result=`/bin/sh ./config.sub ${target}`
-               target_cpu=`echo $result | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'`
-               target_vendor=`echo $result | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'`
-               target_os=`echo $result | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'`
-               target=${target_cpu}-${target_vendor}-${target_os}
-               target_makefile_frag=config/tmake-${target}
-
-#### configure.in per-target parts come in here.
-
-case "${target_cpu}" in
-
-m68k)
-       case "${target_vendor}" in
-       att)    gdb_target=3b1 ;;
-       altos)  gdb_target=altos ;;
-       hp)
-               case "${target_os}" in
-               bsd)    gdb_target=hp300bsd ;;
-               hpux)   gdb_target=hp300hpux ;;
-               esac
-               ;;
-       sun)
-               case "${target_os}" in
-               sunos3) gdb_target=sun3os3 ;;
-               sunos4) gdb_target=sun3os4 ;;
-               *)      gdb_target=sun3 ;;
-               esac
-               ;;
-       wrs)    gdb_target=vxworks68 ;;
-       isi)    gdb_target=isi ;;
-       sony)   gdb_target=news ;;
-       esac
-       ;;
-
-m68000)
-       case "${target_vendor}" in
-       sun)
-               case "${target_os}" in
-               sunos3) gdb_target=sun2os3 ;;
-               sunos4) gdb_target=sun2os4 ;;
-               *)      gdb_target=sun2 ;;
-               esac
-       esac
-       ;;
-
-m68030)
-       case "${target_vendor}" in
-       sony)   gdb_target=news1000 ;;
-       esac
-       ;;
-
-none | arm | tahoe | vax | np1 | pn | np1 | pn | pyramid | merlin | m88k)
-       gdb_target=${target_cpu} ;;
-
-a29k)
-       case "${target_os}" in
-       none|aout|coff) gdb_target=a29k ;;
-       sym1)   gdb_target=ultra3 ;;
-       kern)   gdb_target=a29k-kern ;;
-       esac
-       ;;
-       
-mips)
-       case "${target_vendor}" in
-       sony)   gdb_target=bigmips ;;
-       dec)    gdb_target=dec3100 ;;
-       little) gdb_target=littlemips ;;
-       sgi)    gdb_target=irix3 ;;
-       esac
-       ;;
-
-c1 | c2)       gdb_target=convex ;;
-
-sparc)
-       case "${target_vendor}" in
-       sun)
-               case "${target_os}" in
-               sunos3) gdb_target=sun4os3 ;;
-               sunos4) gdb_target=sun4os4 ;;
-               *)      gdb_target=sun4 ;;
-               esac
-               ;;
-       esac
-       ;;
-
-
-i386)
-       case "${target_vendor}" in
-       sco)    gdb_target=i386sco ;;
-       sun)    gdb_target=sun386 ;;
-       sequent)        gdb_target=symmetry ;;
-       coff)   gdb_target=i386v ;;
-       aout)   gdb_target=i386v ;;
-       *)
-               case "${target_os}" in
-               sysv)   gdb_target=i386v ;;
-               sysv32) gdb_target=i386v32 ;;
-               esac
-       esac
-       ;;
-
-i960)
-       case "${target_vendor}" in
-       bout | wrs)     gdb_target=vxworks960 ;;
-       coff | intel)   gdb_target=nindy960 ;;
-       esac
-       ;;
-
-ns32k)
-       case "${target_vendor}" in
-       utek)   gdb_target=umax ;;
-       esac
-       ;;
-
-### unhandled targets
-# altosgas
-# i386v-g
-# i386v32-g
-
-esac
-
-if [ ! -f tconfig/${gdb_target} ]; then
-       echo '***' "Gdb does not support target ${target}" 1>&2
-       exit 1
-fi
-
-if [ -z "${removing}" ] ; then
-       cat xconfig/${gdb_host} tconfig/${gdb_target} | awk '$1 == "#msg" {
-               print substr($0,6)}'
-fi
-
-#  We really shouldn't depend on there being a space after TM_FILE= ...
-targetfile=`awk '$1 == "TM_FILE=" { print $2 }' <tconfig/${gdb_target}`
-
-host_makefile_frag=xconfig/${gdb_host}
-target_makefile_frag=tconfig/${gdb_target}
-
-# If hostfile (XM_FILE) and/or targetfile (TM_FILE) is not set in the
-# ?config/* file, we don't make the corresponding links.  But we have
-# to remove the xm.h files and tm.h files anyway, e.g. when switching
-# from "configure host" to "configure none".
-files=
-links=
-rm -f xm.h
-if [ "${hostfile}" != "" ]; then
-       files="${files} ${hostfile}"
-       links="${links} xm.h"
-fi
-rm -f tm.h
-if [ "${targetfile}" != "" ]; then
-       files="${files} ${targetfile}"
-       links="${links} tm.h"
-fi
-
-## end of per-target part.
-
-               # Temporarily, we support only direct subdir builds.
-               hostsubdir=H-${host_alias}
-               targetsubdir=T-${target_alias}
-
-               if [ -n "${removing}" ] ; then
-                       if [ -n "${subdirs}" ] ; then
-                               if [ -d "${hostsubdir}" ] ; then
-                                       rm -rf ${hostsubdir}/${targetsubdir}
-
-                                       if [ -z "`(ls ${hostsubdir}) 2>&1 | grep Target- | grep -v Target-independent`" ] ; then
-                                               rm -rf ${hostsubdir}
-                                       fi
-                               else
-                                       echo Warning: no `pwd`/${hostsubdir} to remove.
-                               fi
-                       else
-                               rm -f ${Makefile} config.status ${links}
-                       fi
-               else
-                       if [ -n "${subdirs}" ] ; then
-                               # check for existing status before allowing forced subdirs.
-                               if [ -f ${Makefile} ] ; then
-                                       echo '***' "${Makefile} already exists in source directory.  `pwd` not configured." 1>&2
-                                       exit 1
-                               fi
-
-                               if [ ! -d ${hostsubdir} ] ; then mkdir ${hostsubdir} ; fi
-                               cd ${hostsubdir}
-
-                               if [ ! -d ${targetsubdir} ] ; then
-                                       if [ -z "${commontargets}" ] ; then
-                                               mkdir ${targetsubdir}
-                                       else
-                                               if [ ! -d Target-independent ] ; then
-                                                       mkdir Target-independent
-                                               fi
-
-                                               ${symbolic_link} Target-independent ${targetsubdir}
-                                       fi # if target independent
-                               fi # if no target dir yet
-
-                               cd ${targetsubdir}
-
-                               srcdir=../..
-                       else
-                               # if not subdir builds, then make sure none exist.
-                               if [ -n "`(ls .) 2>&1 | grep Host-`" ] ; then
-                                       echo '***' "Configured subdirs exist.  `pwd` not configured." 1>&2
-                                       exit 1
-                               fi
-                       fi
-
-                       # Find the source files, if location was not specified.
-                       if [ -z "${srcdir}" ] ; then
-                               srcdirdefaulted=1
-                               srcdir=.
-                               if [ -n "${srctrigger}" -a ! -r ${srctrigger} ] ; then
-                                       srcdir=..
-                               fi
-                       fi
-
-                       if [ -n "${srctrigger}" -a ! -r ${srcdir}/${srctrigger} ] ; then
-                               if [ -z "${srcdirdefaulted}" ] ; then
-                                       echo '***' "${progname}: Can't find ${srcname} sources in `pwd`/${srcdir}" 1>&2
-                               else
-                                       echo '***' "${progname}: Can't find ${srcname} sources in `pwd`/. or `pwd`/.." 1>&2
-                               fi
-
-                               echo '***' \(At least ${srctrigger} is missing.\) 1>&2
-                               exit 1
-                       fi
-
-                       # Set up the list of links to be made.
-                       # ${links} is the list of link names, and ${files} is the list of names to link to.
-
-                       # Make the links.
-                       while [ -n "${files}" ] ; do
-                               # set file to car of files, files to cdr of files
-                               set ${files}; file=$1; shift; files=$*
-                               set ${links}; link=$1; shift; links=$*
-
-                               if [ ! -r ${srcdir}/${file} ] ; then
-                                       echo '***' "${progname}: cannot create a link \"${link}\"," 1>&2
-                                       echo '***' "since the file \"${file}\" does not exist." 1>&2
-                                       exit 1
-                               fi
-
-                               ${remove} -f ${link}
-                               rm -f config.status
-                               # Make a symlink if possible, otherwise try a hard link
-                               ${symbolic_link} ${srcdir}/${file} ${link} 2>/dev/null || ${hard_link} ${srcdir}/${file} ${link}
-
-                               if [ ! -r ${link} ] ; then
-                                       echo '***' "${progname}: unable to link \"${link}\" to \"${srcdir}/${file}\"." 1>&2
-                                       exit 1
-                               fi
-
-                               if [ -n "${verbose}" ] ; then
-                                       echo "Linked \"${link}\" to \"${srcdir}/${file}\"."
-                               fi
-                       done
-
-                       # Create a .gdbinit file which runs the one in srcdir
-                       # and tells GDB to look there for source files.
-
-                       case ${srcdir} in
-                       .)
-                               ;;
-                       *)
-                               echo "dir ." > .gdbinit
-                               echo "dir ${srcdir}" >> .gdbinit
-                               echo "source ${srcdir}/.gdbinit" >> .gdbinit
-                               ;;
-                       esac
-
-                       # Install a makefile, and make it set VPATH
-                       # if necessary so that the sources are found.
-                       # Also change its value of srcdir.
-
-               # FIXME-someday: This business of always writing to .tem and mv back
-               # is so that I don't screw things up while developing.  Once this
-               # template is stable, these should be optimized. xoxorich.
-
-                       # Define macro CROSS_COMPILE in compilation if this is a cross-compiler.
-                       if [ "${host}" != "${target}" ] ; then
-                               echo "CROSS=-DCROSS_COMPILE" > ${Makefile}
-                               echo "ALL=start.encap" >> ${Makefile}
-                       else
-                               echo "ALL=all.internal" > ${Makefile}
-                       fi
-
-                       # set target, host, VPATH
-                       echo "host_alias = ${host_alias}" >> ${Makefile}
-                       echo "host_cpu = ${host_cpu}" >> ${Makefile}
-                       echo "host_vendor = ${host_vendor}" >> ${Makefile}
-                       echo "host_os = ${host_os}" >> ${Makefile}
-
-                       echo "target_alias = ${target_alias}" >> ${Makefile}
-                       echo "target_cpu = ${target_cpu}" >> ${Makefile}
-                       echo "target_vendor = ${target_vendor}" >> ${Makefile}
-                       echo "target_os = ${target_os}" >> ${Makefile}
-
-                       if [ -n "${subdirs}" ] ; then
-                               echo "subdir = /${hostsubdir}/${targetsubdir}" >> ${Makefile}
-                       else
-                               echo "subdir =" >> ${Makefile}
-                       fi
-
-               #       echo "workdir = `pwd`" >> ${Makefile}
-                       echo "VPATH = ${srcdir}" >> ${Makefile}
-
-                       # add "Makefile.in" (or whatever it's called)
-                       cat ${srcdir}/${Makefile_in} >> ${Makefile}
-
-                       # Conditionalize the makefile for this host.
-                       if [ -f ${srcdir}/${host_makefile_frag} ] ; then
-                               (echo "host_makefile_frag = ${srcdir}/${host_makefile_frag}" ; 
-                                       sed -e "/^####/  r ${srcdir}/${host_makefile_frag}" ${Makefile}) > Makefile.tem
-                               mv Makefile.tem ${Makefile}
-                       fi
-
-                       # Conditionalize the makefile for this target.
-                       if [ -f ${srcdir}/${target_makefile_frag} ] ; then
-                               (echo "target_makefile_frag = ${srcdir}/${target_makefile_frag}" ; 
-                                       sed -e "/^####/  r ${srcdir}/${target_makefile_frag}" ${Makefile}) > Makefile.tem
-                               mv Makefile.tem ${Makefile}
-                       fi
-
-                       # set srcdir
-                       sed "s@^srcdir = \.@srcdir = ${srcdir}@" ${Makefile} > Makefile.tem
-                       mv Makefile.tem ${Makefile}
-
-                       # set destdir
-                       if [ -n "${destdir}" ] ; then
-                               sed "s:^destdir =.*$:destdir = ${destdir}:" ${Makefile} > Makefile.tem
-                               mv Makefile.tem ${Makefile}
-                       fi
-
-                       # reset SUBDIRS
-                       sed "s:^SUBDIRS =.*$:SUBDIRS = ${configdirs}:" ${Makefile} > Makefile.tem
-                       mv Makefile.tem ${Makefile}
-
-                       # reset NONSUBDIRS
-                       sed "s:^NONSUBDIRS =.*$:NONSUBDIRS = ${noconfigdirs}:" ${Makefile} > Makefile.tem
-                       mv Makefile.tem ${Makefile}
-
-                       using=
-                       if [ -f ${srcdir}/${host_makefile_frag} ] ; then
-                               using=" using \"${host_makefile_frag}\""
-                       fi
-
-                       # remove any form feeds.
-                       sed -e "s/\f//" ${Makefile} > Makefile.tem
-                       mv Makefile.tem ${Makefile}
-
-                       if [ -f ${srcdir}/${target_makefile_frag} ] ; then
-                               if [ -z "${using}" ] ; then
-                                       andusing=" using \"${target_makefile_frag}\""
-                               else
-                                       andusing="${using} and \"${target_makefile_frag}\""
-                               fi
-                       else
-                               andusing=${using}
-                       fi
-
-                       if [ -n "${verbose}" -o -z "${recurring}" ] ; then
-                               echo "Created \"${Makefile}\"" in `pwd`${andusing}.
-                       fi
-
-#### configure.in post-target parts come in here.
-
-case ${srcdir} in
-  .)
-    ;;
-  *)
-    grep -s "source ${srcdir}/.gdbinit" .gdbinit 2>/dev/null || \
-      echo "source ${srcdir}/.gdbinit" >> .gdbinit
-esac
-
-cat ${srcdir}/alldeps.mak ${srcdir}/depend >>Makefile
-## end of post-target part.
-
-                       # describe the chosen configuration in config.status.
-                       # Make that file a shellscript which will reestablish
-                       # the same configuration.  Used in Makefiles to rebuild
-                       # Makefiles.
-
-                       echo "#!/bin/sh
-# ${srcname} was configured as follows:
-${srcdir}/configure" ${arguments} `if [ -z "${norecursion}" ] ; then echo +norecursion ; else true ; fi` > config.status
-                       chmod a+x config.status
-
-                       originaldir=`pwd`
-                       cd ${srcdir}
-               fi
-
-               # If there are subdirectories, then recurse. 
-               if [ -z "${norecursion}" -a -n "${configdirs}" ] ; then 
-                       for configdir in ${configdirs} ; do
-                               if [ -n "${verbose}" ] ; then
-                                       echo Configuring ${configdir}...
-                               fi
-
-                               if [ -d ${configdir} ] ; then
-                                       (cd ${configdir} ;
-                                               ./configure +recurring ${host_alias} +target=${target_alias} \
-                                                       ${verbose} ${subdirs} ${removing} +destdir=${destdir}) \
-                                               | sed 's/^/     /'
-                               else
-                                       if [ -n "${verbose}" ] ; then
-                                               echo Warning: directory \"${configdir}\" is missing.
-                                       fi
-                               fi
-                       done
-               fi
-       done # for each target
-
-       # Now build a Makefile for this host.
-       if [ -n "${subdirs}" -a ! -n "${removing}" ] ; then
-               cd ${hostsubdir}
-               cat > GNUmakefile << E!O!F
-# Makefile generated by configure for host ${host_alias}.
-
-ALL := $(shell ls -d Target-*)
-
-%:
-       $(foreach subdir,$(ALL),$(MAKE) -C $(subdir) \$@ &&) true
-
-all:
-E!O!F
-               cd ..
-       fi
-done # for each host
-
-exit 0
-
-#
-# Local Variables:
-# fill-column: 131
-# End:
-#
-
-# end of configure
diff --git a/gdb/convex-opcode.h b/gdb/convex-opcode.h
deleted file mode 100755 (executable)
index 523c874..0000000
+++ /dev/null
@@ -1,1677 +0,0 @@
-/* Include information for instruction dissasembly on the Convex.
-   Copyright (C) 1989, Free Software Foundation.  
-
-This file is part of GDB.
-
-GDB is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 1, or (at your option)
-any later version.
-
-GDB is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with GDB; see the file COPYING.  If not, write to
-the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-#define xxx 0
-#define rrr 1
-#define rr 2
-#define rxr 3
-#define r 4
-#define nops 5
-#define nr 6
-#define pcrel 7
-#define lr 8
-#define rxl 9
-#define rlr 10
-#define rrl 11
-#define iml 12
-#define imr 13
-#define a1r 14
-#define a1l 15
-#define a2r 16
-#define a2l 17
-#define a3 18
-#define a4 19
-#define a5 20
-#define V 1
-#define S 2
-#define VM 3
-#define A 4
-#define VL 5
-#define VS 6
-#define VLS 7
-#define PSW 8
-/* Prevent an error during "make depend".  */
-#if !defined (PC)
-#define PC 9
-#endif
-#define ITR 10
-#define VV 11
-#define ITSR 12
-#define TOC 13
-#define CIR 14
-#define TTR 15
-#define VMU 16
-#define VML 17
-#define ICR 18
-#define TCPU 19
-#define CPUID 20
-#define TID 21
-char *op[] = {
-  "",
-  "v0\0v1\0v2\0v3\0v4\0v5\0v6\0v7",
-  "s0\0s1\0s2\0s3\0s4\0s5\0s6\0s7",
-  "vm",
-  "sp\0a1\0a2\0a3\0a4\0a5\0ap\0fp",
-  "vl",
-  "vs",
-  "vls",
-  "psw",
-  "pc",
-  "itr",
-  "vv",
-  "itsr",
-  "toc",
-  "cir",
-  "ttr",
-  "vmu",
-  "vml",
-  "icr",
-  "tcpu",
-  "cpuid",
-  "tid",
-};
-struct formstr format0[] = {
-  {0,0,rrr,V,S,S},     /* mov */
-  {0,0,rrr,S,S,V},     /* mov */
-  {1,1,rrr,V,V,V},     /* merg.t */
-  {2,1,rrr,V,V,V},     /* mask.t */
-  {1,2,rrr,V,S,V},     /* merg.f */
-  {2,2,rrr,V,S,V},     /* mask.f */
-  {1,1,rrr,V,S,V},     /* merg.t */
-  {2,1,rrr,V,S,V},     /* mask.t */
-  {3,3,rrr,V,V,V},     /* mul.s */
-  {3,4,rrr,V,V,V},     /* mul.d */
-  {4,3,rrr,V,V,V},     /* div.s */
-  {4,4,rrr,V,V,V},     /* div.d */
-  {3,3,rrr,V,S,V},     /* mul.s */
-  {3,4,rrr,V,S,V},     /* mul.d */
-  {4,3,rrr,V,S,V},     /* div.s */
-  {4,4,rrr,V,S,V},     /* div.d */
-  {5,0,rrr,V,V,V},     /* and */
-  {6,0,rrr,V,V,V},     /* or */
-  {7,0,rrr,V,V,V},     /* xor */
-  {8,0,rrr,V,V,V},     /* shf */
-  {5,0,rrr,V,S,V},     /* and */
-  {6,0,rrr,V,S,V},     /* or */
-  {7,0,rrr,V,S,V},     /* xor */
-  {8,0,rrr,V,S,V},     /* shf */
-  {9,3,rrr,V,V,V},     /* add.s */
-  {9,4,rrr,V,V,V},     /* add.d */
-  {10,3,rrr,V,V,V},    /* sub.s */
-  {10,4,rrr,V,V,V},    /* sub.d */
-  {9,3,rrr,V,S,V},     /* add.s */
-  {9,4,rrr,V,S,V},     /* add.d */
-  {10,3,rrr,V,S,V},    /* sub.s */
-  {10,4,rrr,V,S,V},    /* sub.d */
-  {9,5,rrr,V,V,V},     /* add.b */
-  {9,6,rrr,V,V,V},     /* add.h */
-  {9,7,rrr,V,V,V},     /* add.w */
-  {9,8,rrr,V,V,V},     /* add.l */
-  {9,5,rrr,V,S,V},     /* add.b */
-  {9,6,rrr,V,S,V},     /* add.h */
-  {9,7,rrr,V,S,V},     /* add.w */
-  {9,8,rrr,V,S,V},     /* add.l */
-  {10,5,rrr,V,V,V},    /* sub.b */
-  {10,6,rrr,V,V,V},    /* sub.h */
-  {10,7,rrr,V,V,V},    /* sub.w */
-  {10,8,rrr,V,V,V},    /* sub.l */
-  {10,5,rrr,V,S,V},    /* sub.b */
-  {10,6,rrr,V,S,V},    /* sub.h */
-  {10,7,rrr,V,S,V},    /* sub.w */
-  {10,8,rrr,V,S,V},    /* sub.l */
-  {3,5,rrr,V,V,V},     /* mul.b */
-  {3,6,rrr,V,V,V},     /* mul.h */
-  {3,7,rrr,V,V,V},     /* mul.w */
-  {3,8,rrr,V,V,V},     /* mul.l */
-  {3,5,rrr,V,S,V},     /* mul.b */
-  {3,6,rrr,V,S,V},     /* mul.h */
-  {3,7,rrr,V,S,V},     /* mul.w */
-  {3,8,rrr,V,S,V},     /* mul.l */
-  {4,5,rrr,V,V,V},     /* div.b */
-  {4,6,rrr,V,V,V},     /* div.h */
-  {4,7,rrr,V,V,V},     /* div.w */
-  {4,8,rrr,V,V,V},     /* div.l */
-  {4,5,rrr,V,S,V},     /* div.b */
-  {4,6,rrr,V,S,V},     /* div.h */
-  {4,7,rrr,V,S,V},     /* div.w */
-  {4,8,rrr,V,S,V},     /* div.l */
-};
-struct formstr format1[] = {
-  {11,0,xxx,0,0,0},    /* exit */
-  {12,0,a3,0,0,0},     /* jmp */
-  {13,2,a3,0,0,0},     /* jmpi.f */
-  {13,1,a3,0,0,0},     /* jmpi.t */
-  {14,2,a3,0,0,0},     /* jmpa.f */
-  {14,1,a3,0,0,0},     /* jmpa.t */
-  {15,2,a3,0,0,0},     /* jmps.f */
-  {15,1,a3,0,0,0},     /* jmps.t */
-  {16,0,a3,0,0,0},     /* tac */
-  {17,0,a1r,A,0,0},    /* ldea */
-  {18,8,a1l,VLS,0,0},  /* ld.l */
-  {18,9,a1l,VM,0,0},   /* ld.x */
-  {19,0,a3,0,0,0},     /* tas */
-  {20,0,a3,0,0,0},     /* pshea */
-  {21,8,a2l,VLS,0,0},  /* st.l */
-  {21,9,a2l,VM,0,0},   /* st.x */
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {22,0,a3,0,0,0},     /* call */
-  {23,0,a3,0,0,0},     /* calls */
-  {24,0,a3,0,0,0},     /* callq */
-  {25,0,a1r,A,0,0},    /* pfork */
-  {26,5,a2r,S,0,0},    /* ste.b */
-  {26,6,a2r,S,0,0},    /* ste.h */
-  {26,7,a2r,S,0,0},    /* ste.w */
-  {26,8,a2r,S,0,0},    /* ste.l */
-  {18,5,a1r,A,0,0},    /* ld.b */
-  {18,6,a1r,A,0,0},    /* ld.h */
-  {18,7,a1r,A,0,0},    /* ld.w */
-  {27,7,a1r,A,0,0},    /* incr.w */
-  {21,5,a2r,A,0,0},    /* st.b */
-  {21,6,a2r,A,0,0},    /* st.h */
-  {21,7,a2r,A,0,0},    /* st.w */
-  {27,8,a1r,S,0,0},    /* incr.l */
-  {18,5,a1r,S,0,0},    /* ld.b */
-  {18,6,a1r,S,0,0},    /* ld.h */
-  {18,7,a1r,S,0,0},    /* ld.w */
-  {18,8,a1r,S,0,0},    /* ld.l */
-  {21,5,a2r,S,0,0},    /* st.b */
-  {21,6,a2r,S,0,0},    /* st.h */
-  {21,7,a2r,S,0,0},    /* st.w */
-  {21,8,a2r,S,0,0},    /* st.l */
-  {18,5,a1r,V,0,0},    /* ld.b */
-  {18,6,a1r,V,0,0},    /* ld.h */
-  {18,7,a1r,V,0,0},    /* ld.w */
-  {18,8,a1r,V,0,0},    /* ld.l */
-  {21,5,a2r,V,0,0},    /* st.b */
-  {21,6,a2r,V,0,0},    /* st.h */
-  {21,7,a2r,V,0,0},    /* st.w */
-  {21,8,a2r,V,0,0},    /* st.l */
-};
-struct formstr format2[] = {
-  {28,5,rr,A,A,0},     /* cvtw.b */
-  {28,6,rr,A,A,0},     /* cvtw.h */
-  {29,7,rr,A,A,0},     /* cvtb.w */
-  {30,7,rr,A,A,0},     /* cvth.w */
-  {28,5,rr,S,S,0},     /* cvtw.b */
-  {28,6,rr,S,S,0},     /* cvtw.h */
-  {29,7,rr,S,S,0},     /* cvtb.w */
-  {30,7,rr,S,S,0},     /* cvth.w */
-  {28,3,rr,S,S,0},     /* cvtw.s */
-  {31,7,rr,S,S,0},     /* cvts.w */
-  {32,3,rr,S,S,0},     /* cvtd.s */
-  {31,4,rr,S,S,0},     /* cvts.d */
-  {31,8,rr,S,S,0},     /* cvts.l */
-  {32,8,rr,S,S,0},     /* cvtd.l */
-  {33,3,rr,S,S,0},     /* cvtl.s */
-  {33,4,rr,S,S,0},     /* cvtl.d */
-  {34,0,rr,A,A,0},     /* ldpa */
-  {8,0,nr,A,0,0},      /* shf */
-  {18,6,nr,A,0,0},     /* ld.h */
-  {18,7,nr,A,0,0},     /* ld.w */
-  {33,7,rr,S,S,0},     /* cvtl.w */
-  {28,8,rr,S,S,0},     /* cvtw.l */
-  {35,1,rr,S,S,0},     /* plc.t */
-  {36,0,rr,S,S,0},     /* tzc */
-  {37,6,rr,A,A,0},     /* eq.h */
-  {37,7,rr,A,A,0},     /* eq.w */
-  {37,6,nr,A,0,0},     /* eq.h */
-  {37,7,nr,A,0,0},     /* eq.w */
-  {37,5,rr,S,S,0},     /* eq.b */
-  {37,6,rr,S,S,0},     /* eq.h */
-  {37,7,rr,S,S,0},     /* eq.w */
-  {37,8,rr,S,S,0},     /* eq.l */
-  {38,6,rr,A,A,0},     /* leu.h */
-  {38,7,rr,A,A,0},     /* leu.w */
-  {38,6,nr,A,0,0},     /* leu.h */
-  {38,7,nr,A,0,0},     /* leu.w */
-  {38,5,rr,S,S,0},     /* leu.b */
-  {38,6,rr,S,S,0},     /* leu.h */
-  {38,7,rr,S,S,0},     /* leu.w */
-  {38,8,rr,S,S,0},     /* leu.l */
-  {39,6,rr,A,A,0},     /* ltu.h */
-  {39,7,rr,A,A,0},     /* ltu.w */
-  {39,6,nr,A,0,0},     /* ltu.h */
-  {39,7,nr,A,0,0},     /* ltu.w */
-  {39,5,rr,S,S,0},     /* ltu.b */
-  {39,6,rr,S,S,0},     /* ltu.h */
-  {39,7,rr,S,S,0},     /* ltu.w */
-  {39,8,rr,S,S,0},     /* ltu.l */
-  {40,6,rr,A,A,0},     /* le.h */
-  {40,7,rr,A,A,0},     /* le.w */
-  {40,6,nr,A,0,0},     /* le.h */
-  {40,7,nr,A,0,0},     /* le.w */
-  {40,5,rr,S,S,0},     /* le.b */
-  {40,6,rr,S,S,0},     /* le.h */
-  {40,7,rr,S,S,0},     /* le.w */
-  {40,8,rr,S,S,0},     /* le.l */
-  {41,6,rr,A,A,0},     /* lt.h */
-  {41,7,rr,A,A,0},     /* lt.w */
-  {41,6,nr,A,0,0},     /* lt.h */
-  {41,7,nr,A,0,0},     /* lt.w */
-  {41,5,rr,S,S,0},     /* lt.b */
-  {41,6,rr,S,S,0},     /* lt.h */
-  {41,7,rr,S,S,0},     /* lt.w */
-  {41,8,rr,S,S,0},     /* lt.l */
-  {9,7,rr,S,A,0},      /* add.w */
-  {8,0,rr,A,A,0},      /* shf */
-  {0,0,rr,A,A,0},      /* mov */
-  {0,0,rr,S,A,0},      /* mov */
-  {0,7,rr,S,S,0},      /* mov.w */
-  {8,0,rr,S,S,0},      /* shf */
-  {0,0,rr,S,S,0},      /* mov */
-  {0,0,rr,A,S,0},      /* mov */
-  {5,0,rr,A,A,0},      /* and */
-  {6,0,rr,A,A,0},      /* or */
-  {7,0,rr,A,A,0},      /* xor */
-  {42,0,rr,A,A,0},     /* not */
-  {5,0,rr,S,S,0},      /* and */
-  {6,0,rr,S,S,0},      /* or */
-  {7,0,rr,S,S,0},      /* xor */
-  {42,0,rr,S,S,0},     /* not */
-  {40,3,rr,S,S,0},     /* le.s */
-  {40,4,rr,S,S,0},     /* le.d */
-  {41,3,rr,S,S,0},     /* lt.s */
-  {41,4,rr,S,S,0},     /* lt.d */
-  {9,3,rr,S,S,0},      /* add.s */
-  {9,4,rr,S,S,0},      /* add.d */
-  {10,3,rr,S,S,0},     /* sub.s */
-  {10,4,rr,S,S,0},     /* sub.d */
-  {37,3,rr,S,S,0},     /* eq.s */
-  {37,4,rr,S,S,0},     /* eq.d */
-  {43,6,rr,A,A,0},     /* neg.h */
-  {43,7,rr,A,A,0},     /* neg.w */
-  {3,3,rr,S,S,0},      /* mul.s */
-  {3,4,rr,S,S,0},      /* mul.d */
-  {4,3,rr,S,S,0},      /* div.s */
-  {4,4,rr,S,S,0},      /* div.d */
-  {9,6,rr,A,A,0},      /* add.h */
-  {9,7,rr,A,A,0},      /* add.w */
-  {9,6,nr,A,0,0},      /* add.h */
-  {9,7,nr,A,0,0},      /* add.w */
-  {9,5,rr,S,S,0},      /* add.b */
-  {9,6,rr,S,S,0},      /* add.h */
-  {9,7,rr,S,S,0},      /* add.w */
-  {9,8,rr,S,S,0},      /* add.l */
-  {10,6,rr,A,A,0},     /* sub.h */
-  {10,7,rr,A,A,0},     /* sub.w */
-  {10,6,nr,A,0,0},     /* sub.h */
-  {10,7,nr,A,0,0},     /* sub.w */
-  {10,5,rr,S,S,0},     /* sub.b */
-  {10,6,rr,S,S,0},     /* sub.h */
-  {10,7,rr,S,S,0},     /* sub.w */
-  {10,8,rr,S,S,0},     /* sub.l */
-  {3,6,rr,A,A,0},      /* mul.h */
-  {3,7,rr,A,A,0},      /* mul.w */
-  {3,6,nr,A,0,0},      /* mul.h */
-  {3,7,nr,A,0,0},      /* mul.w */
-  {3,5,rr,S,S,0},      /* mul.b */
-  {3,6,rr,S,S,0},      /* mul.h */
-  {3,7,rr,S,S,0},      /* mul.w */
-  {3,8,rr,S,S,0},      /* mul.l */
-  {4,6,rr,A,A,0},      /* div.h */
-  {4,7,rr,A,A,0},      /* div.w */
-  {4,6,nr,A,0,0},      /* div.h */
-  {4,7,nr,A,0,0},      /* div.w */
-  {4,5,rr,S,S,0},      /* div.b */
-  {4,6,rr,S,S,0},      /* div.h */
-  {4,7,rr,S,S,0},      /* div.w */
-  {4,8,rr,S,S,0},      /* div.l */
-};
-struct formstr format3[] = {
-  {32,3,rr,V,V,0},     /* cvtd.s */
-  {31,4,rr,V,V,0},     /* cvts.d */
-  {33,4,rr,V,V,0},     /* cvtl.d */
-  {32,8,rr,V,V,0},     /* cvtd.l */
-  {0,0,rrl,S,S,VM},    /* mov */
-  {0,0,rlr,S,VM,S},    /* mov */
-  {0,0,0,0,0,0},
-  {44,0,rr,S,S,0},     /* lop */
-  {36,0,rr,V,V,0},     /* tzc */
-  {44,0,rr,V,V,0},     /* lop */
-  {0,0,0,0,0,0},
-  {42,0,rr,V,V,0},     /* not */
-  {8,0,rr,S,V,0},      /* shf */
-  {35,1,rr,V,V,0},     /* plc.t */
-  {45,2,rr,V,V,0},     /* cprs.f */
-  {45,1,rr,V,V,0},     /* cprs.t */
-  {37,3,rr,V,V,0},     /* eq.s */
-  {37,4,rr,V,V,0},     /* eq.d */
-  {43,3,rr,V,V,0},     /* neg.s */
-  {43,4,rr,V,V,0},     /* neg.d */
-  {37,3,rr,S,V,0},     /* eq.s */
-  {37,4,rr,S,V,0},     /* eq.d */
-  {43,3,rr,S,S,0},     /* neg.s */
-  {43,4,rr,S,S,0},     /* neg.d */
-  {40,3,rr,V,V,0},     /* le.s */
-  {40,4,rr,V,V,0},     /* le.d */
-  {41,3,rr,V,V,0},     /* lt.s */
-  {41,4,rr,V,V,0},     /* lt.d */
-  {40,3,rr,S,V,0},     /* le.s */
-  {40,4,rr,S,V,0},     /* le.d */
-  {41,3,rr,S,V,0},     /* lt.s */
-  {41,4,rr,S,V,0},     /* lt.d */
-  {37,5,rr,V,V,0},     /* eq.b */
-  {37,6,rr,V,V,0},     /* eq.h */
-  {37,7,rr,V,V,0},     /* eq.w */
-  {37,8,rr,V,V,0},     /* eq.l */
-  {37,5,rr,S,V,0},     /* eq.b */
-  {37,6,rr,S,V,0},     /* eq.h */
-  {37,7,rr,S,V,0},     /* eq.w */
-  {37,8,rr,S,V,0},     /* eq.l */
-  {40,5,rr,V,V,0},     /* le.b */
-  {40,6,rr,V,V,0},     /* le.h */
-  {40,7,rr,V,V,0},     /* le.w */
-  {40,8,rr,V,V,0},     /* le.l */
-  {40,5,rr,S,V,0},     /* le.b */
-  {40,6,rr,S,V,0},     /* le.h */
-  {40,7,rr,S,V,0},     /* le.w */
-  {40,8,rr,S,V,0},     /* le.l */
-  {41,5,rr,V,V,0},     /* lt.b */
-  {41,6,rr,V,V,0},     /* lt.h */
-  {41,7,rr,V,V,0},     /* lt.w */
-  {41,8,rr,V,V,0},     /* lt.l */
-  {41,5,rr,S,V,0},     /* lt.b */
-  {41,6,rr,S,V,0},     /* lt.h */
-  {41,7,rr,S,V,0},     /* lt.w */
-  {41,8,rr,S,V,0},     /* lt.l */
-  {43,5,rr,V,V,0},     /* neg.b */
-  {43,6,rr,V,V,0},     /* neg.h */
-  {43,7,rr,V,V,0},     /* neg.w */
-  {43,8,rr,V,V,0},     /* neg.l */
-  {43,5,rr,S,S,0},     /* neg.b */
-  {43,6,rr,S,S,0},     /* neg.h */
-  {43,7,rr,S,S,0},     /* neg.w */
-  {43,8,rr,S,S,0},     /* neg.l */
-};
-struct formstr format4[] = {
-  {46,0,nops,0,0,0},   /* nop */
-  {47,0,pcrel,0,0,0},  /* br */
-  {48,2,pcrel,0,0,0},  /* bri.f */
-  {48,1,pcrel,0,0,0},  /* bri.t */
-  {49,2,pcrel,0,0,0},  /* bra.f */
-  {49,1,pcrel,0,0,0},  /* bra.t */
-  {50,2,pcrel,0,0,0},  /* brs.f */
-  {50,1,pcrel,0,0,0},  /* brs.t */
-};
-struct formstr format5[] = {
-  {51,5,rr,V,V,0},     /* ldvi.b */
-  {51,6,rr,V,V,0},     /* ldvi.h */
-  {51,7,rr,V,V,0},     /* ldvi.w */
-  {51,8,rr,V,V,0},     /* ldvi.l */
-  {28,3,rr,V,V,0},     /* cvtw.s */
-  {31,7,rr,V,V,0},     /* cvts.w */
-  {28,8,rr,V,V,0},     /* cvtw.l */
-  {33,7,rr,V,V,0},     /* cvtl.w */
-  {52,5,rxr,V,V,0},    /* stvi.b */
-  {52,6,rxr,V,V,0},    /* stvi.h */
-  {52,7,rxr,V,V,0},    /* stvi.w */
-  {52,8,rxr,V,V,0},    /* stvi.l */
-  {52,5,rxr,S,V,0},    /* stvi.b */
-  {52,6,rxr,S,V,0},    /* stvi.h */
-  {52,7,rxr,S,V,0},    /* stvi.w */
-  {52,8,rxr,S,V,0},    /* stvi.l */
-};
-struct formstr format6[] = {
-  {53,0,r,A,0,0},      /* ldsdr */
-  {54,0,r,A,0,0},      /* ldkdr */
-  {55,3,r,S,0,0},      /* ln.s */
-  {55,4,r,S,0,0},      /* ln.d */
-  {56,0,nops,0,0,0},   /* patu */
-  {57,0,r,A,0,0},      /* pate */
-  {58,0,nops,0,0,0},   /* pich */
-  {59,0,nops,0,0,0},   /* plch */
-  {0,0,lr,PSW,A,0},    /* mov */
-  {0,0,rxl,A,PSW,0},   /* mov */
-  {0,0,lr,PC,A,0},     /* mov */
-  {60,0,r,S,0,0},      /* idle */
-  {0,0,lr,ITR,S,0},    /* mov */
-  {0,0,rxl,S,ITR,0},   /* mov */
-  {0,0,0,0,0,0},
-  {0,0,rxl,S,ITSR,0},  /* mov */
-  {61,0,nops,0,0,0},   /* rtnq */
-  {62,0,nops,0,0,0},   /* cfork */
-  {63,0,nops,0,0,0},   /* rtn */
-  {64,0,nops,0,0,0},   /* wfork */
-  {65,0,nops,0,0,0},   /* join */
-  {66,0,nops,0,0,0},   /* rtnc */
-  {67,3,r,S,0,0},      /* exp.s */
-  {67,4,r,S,0,0},      /* exp.d */
-  {68,3,r,S,0,0},      /* sin.s */
-  {68,4,r,S,0,0},      /* sin.d */
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {69,3,r,S,0,0},      /* cos.s */
-  {69,4,r,S,0,0},      /* cos.d */
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {70,7,r,A,0,0},      /* psh.w */
-  {0,0,0,0,0,0},
-  {71,7,r,A,0,0},      /* pop.w */
-  {0,0,0,0,0,0},
-  {70,7,r,S,0,0},      /* psh.w */
-  {70,8,r,S,0,0},      /* psh.l */
-  {71,7,r,S,0,0},      /* pop.w */
-  {71,8,r,S,0,0},      /* pop.l */
-  {72,0,nops,0,0,0},   /* eni */
-  {73,0,nops,0,0,0},   /* dsi */
-  {74,0,nops,0,0,0},   /* bkpt */
-  {75,0,nops,0,0,0},   /* msync */
-  {76,0,r,S,0,0},      /* mski */
-  {77,0,r,S,0,0},      /* xmti */
-  {0,0,rxl,S,VV,0},    /* mov */
-  {78,0,nops,0,0,0},   /* tstvv */
-  {0,0,lr,VS,A,0},     /* mov */
-  {0,0,rxl,A,VS,0},    /* mov */
-  {0,0,lr,VL,A,0},     /* mov */
-  {0,0,rxl,A,VL,0},    /* mov */
-  {0,7,lr,VS,S,0},     /* mov.w */
-  {0,7,rxl,S,VS,0},    /* mov.w */
-  {0,7,lr,VL,S,0},     /* mov.w */
-  {0,7,rxl,S,VL,0},    /* mov.w */
-  {79,0,r,A,0,0},      /* diag */
-  {80,0,nops,0,0,0},   /* pbkpt */
-  {81,3,r,S,0,0},      /* sqrt.s */
-  {81,4,r,S,0,0},      /* sqrt.d */
-  {82,0,nops,0,0,0},   /* casr */
-  {0,0,0,0,0,0},
-  {83,3,r,S,0,0},      /* atan.s */
-  {83,4,r,S,0,0},      /* atan.d */
-};
-struct formstr format7[] = {
-  {84,5,r,V,0,0},      /* sum.b */
-  {84,6,r,V,0,0},      /* sum.h */
-  {84,7,r,V,0,0},      /* sum.w */
-  {84,8,r,V,0,0},      /* sum.l */
-  {85,0,r,V,0,0},      /* all */
-  {86,0,r,V,0,0},      /* any */
-  {87,0,r,V,0,0},      /* parity */
-  {0,0,0,0,0,0},
-  {88,5,r,V,0,0},      /* max.b */
-  {88,6,r,V,0,0},      /* max.h */
-  {88,7,r,V,0,0},      /* max.w */
-  {88,8,r,V,0,0},      /* max.l */
-  {89,5,r,V,0,0},      /* min.b */
-  {89,6,r,V,0,0},      /* min.h */
-  {89,7,r,V,0,0},      /* min.w */
-  {89,8,r,V,0,0},      /* min.l */
-  {84,3,r,V,0,0},      /* sum.s */
-  {84,4,r,V,0,0},      /* sum.d */
-  {90,3,r,V,0,0},      /* prod.s */
-  {90,4,r,V,0,0},      /* prod.d */
-  {88,3,r,V,0,0},      /* max.s */
-  {88,4,r,V,0,0},      /* max.d */
-  {89,3,r,V,0,0},      /* min.s */
-  {89,4,r,V,0,0},      /* min.d */
-  {90,5,r,V,0,0},      /* prod.b */
-  {90,6,r,V,0,0},      /* prod.h */
-  {90,7,r,V,0,0},      /* prod.w */
-  {90,8,r,V,0,0},      /* prod.l */
-  {35,2,lr,VM,S,0},    /* plc.f */
-  {35,1,lr,VM,S,0},    /* plc.t */
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-};
-struct formstr formatx[] = {
-  {0,0,0,0,0,0},
-};
-struct formstr format1a[] = {
-  {91,0,imr,A,0,0},    /* halt */
-  {92,0,a4,0,0,0},     /* sysc */
-  {18,6,imr,A,0,0},    /* ld.h */
-  {18,7,imr,A,0,0},    /* ld.w */
-  {5,0,imr,A,0,0},     /* and */
-  {6,0,imr,A,0,0},     /* or */
-  {7,0,imr,A,0,0},     /* xor */
-  {8,0,imr,A,0,0},     /* shf */
-  {9,6,imr,A,0,0},     /* add.h */
-  {9,7,imr,A,0,0},     /* add.w */
-  {10,6,imr,A,0,0},    /* sub.h */
-  {10,7,imr,A,0,0},    /* sub.w */
-  {3,6,imr,A,0,0},     /* mul.h */
-  {3,7,imr,A,0,0},     /* mul.w */
-  {4,6,imr,A,0,0},     /* div.h */
-  {4,7,imr,A,0,0},     /* div.w */
-  {18,7,iml,VL,0,0},   /* ld.w */
-  {18,7,iml,VS,0,0},   /* ld.w */
-  {0,0,0,0,0,0},
-  {8,7,imr,S,0,0},     /* shf.w */
-  {93,0,a5,0,0,0},     /* trap */
-  {0,0,0,0,0,0},
-  {37,6,imr,A,0,0},    /* eq.h */
-  {37,7,imr,A,0,0},    /* eq.w */
-  {38,6,imr,A,0,0},    /* leu.h */
-  {38,7,imr,A,0,0},    /* leu.w */
-  {39,6,imr,A,0,0},    /* ltu.h */
-  {39,7,imr,A,0,0},    /* ltu.w */
-  {40,6,imr,A,0,0},    /* le.h */
-  {40,7,imr,A,0,0},    /* le.w */
-  {41,6,imr,A,0,0},    /* lt.h */
-  {41,7,imr,A,0,0},    /* lt.w */
-};
-struct formstr format1b[] = {
-  {18,4,imr,S,0,0},    /* ld.d */
-  {18,10,imr,S,0,0},   /* ld.u */
-  {18,8,imr,S,0,0},    /* ld.l */
-  {18,7,imr,S,0,0},    /* ld.w */
-  {5,0,imr,S,0,0},     /* and */
-  {6,0,imr,S,0,0},     /* or */
-  {7,0,imr,S,0,0},     /* xor */
-  {8,0,imr,S,0,0},     /* shf */
-  {9,6,imr,S,0,0},     /* add.h */
-  {9,7,imr,S,0,0},     /* add.w */
-  {10,6,imr,S,0,0},    /* sub.h */
-  {10,7,imr,S,0,0},    /* sub.w */
-  {3,6,imr,S,0,0},     /* mul.h */
-  {3,7,imr,S,0,0},     /* mul.w */
-  {4,6,imr,S,0,0},     /* div.h */
-  {4,7,imr,S,0,0},     /* div.w */
-  {9,3,imr,S,0,0},     /* add.s */
-  {10,3,imr,S,0,0},    /* sub.s */
-  {3,3,imr,S,0,0},     /* mul.s */
-  {4,3,imr,S,0,0},     /* div.s */
-  {40,3,imr,S,0,0},    /* le.s */
-  {41,3,imr,S,0,0},    /* lt.s */
-  {37,6,imr,S,0,0},    /* eq.h */
-  {37,7,imr,S,0,0},    /* eq.w */
-  {38,6,imr,S,0,0},    /* leu.h */
-  {38,7,imr,S,0,0},    /* leu.w */
-  {39,6,imr,S,0,0},    /* ltu.h */
-  {39,7,imr,S,0,0},    /* ltu.w */
-  {40,6,imr,S,0,0},    /* le.h */
-  {40,7,imr,S,0,0},    /* le.w */
-  {41,6,imr,S,0,0},    /* lt.h */
-  {41,7,imr,S,0,0},    /* lt.w */
-};
-struct formstr e0_format0[] = {
-  {10,3,rrr,S,V,V},    /* sub.s */
-  {10,4,rrr,S,V,V},    /* sub.d */
-  {4,3,rrr,S,V,V},     /* div.s */
-  {4,4,rrr,S,V,V},     /* div.d */
-  {10,11,rrr,S,V,V},   /* sub.s.f */
-  {10,12,rrr,S,V,V},   /* sub.d.f */
-  {4,11,rrr,S,V,V},    /* div.s.f */
-  {4,12,rrr,S,V,V},    /* div.d.f */
-  {3,11,rrr,V,V,V},    /* mul.s.f */
-  {3,12,rrr,V,V,V},    /* mul.d.f */
-  {4,11,rrr,V,V,V},    /* div.s.f */
-  {4,12,rrr,V,V,V},    /* div.d.f */
-  {3,11,rrr,V,S,V},    /* mul.s.f */
-  {3,12,rrr,V,S,V},    /* mul.d.f */
-  {4,11,rrr,V,S,V},    /* div.s.f */
-  {4,12,rrr,V,S,V},    /* div.d.f */
-  {5,2,rrr,V,V,V},     /* and.f */
-  {6,2,rrr,V,V,V},     /* or.f */
-  {7,2,rrr,V,V,V},     /* xor.f */
-  {8,2,rrr,V,V,V},     /* shf.f */
-  {5,2,rrr,V,S,V},     /* and.f */
-  {6,2,rrr,V,S,V},     /* or.f */
-  {7,2,rrr,V,S,V},     /* xor.f */
-  {8,2,rrr,V,S,V},     /* shf.f */
-  {9,11,rrr,V,V,V},    /* add.s.f */
-  {9,12,rrr,V,V,V},    /* add.d.f */
-  {10,11,rrr,V,V,V},   /* sub.s.f */
-  {10,12,rrr,V,V,V},   /* sub.d.f */
-  {9,11,rrr,V,S,V},    /* add.s.f */
-  {9,12,rrr,V,S,V},    /* add.d.f */
-  {10,11,rrr,V,S,V},   /* sub.s.f */
-  {10,12,rrr,V,S,V},   /* sub.d.f */
-  {9,13,rrr,V,V,V},    /* add.b.f */
-  {9,14,rrr,V,V,V},    /* add.h.f */
-  {9,15,rrr,V,V,V},    /* add.w.f */
-  {9,16,rrr,V,V,V},    /* add.l.f */
-  {9,13,rrr,V,S,V},    /* add.b.f */
-  {9,14,rrr,V,S,V},    /* add.h.f */
-  {9,15,rrr,V,S,V},    /* add.w.f */
-  {9,16,rrr,V,S,V},    /* add.l.f */
-  {10,13,rrr,V,V,V},   /* sub.b.f */
-  {10,14,rrr,V,V,V},   /* sub.h.f */
-  {10,15,rrr,V,V,V},   /* sub.w.f */
-  {10,16,rrr,V,V,V},   /* sub.l.f */
-  {10,13,rrr,V,S,V},   /* sub.b.f */
-  {10,14,rrr,V,S,V},   /* sub.h.f */
-  {10,15,rrr,V,S,V},   /* sub.w.f */
-  {10,16,rrr,V,S,V},   /* sub.l.f */
-  {3,13,rrr,V,V,V},    /* mul.b.f */
-  {3,14,rrr,V,V,V},    /* mul.h.f */
-  {3,15,rrr,V,V,V},    /* mul.w.f */
-  {3,16,rrr,V,V,V},    /* mul.l.f */
-  {3,13,rrr,V,S,V},    /* mul.b.f */
-  {3,14,rrr,V,S,V},    /* mul.h.f */
-  {3,15,rrr,V,S,V},    /* mul.w.f */
-  {3,16,rrr,V,S,V},    /* mul.l.f */
-  {4,13,rrr,V,V,V},    /* div.b.f */
-  {4,14,rrr,V,V,V},    /* div.h.f */
-  {4,15,rrr,V,V,V},    /* div.w.f */
-  {4,16,rrr,V,V,V},    /* div.l.f */
-  {4,13,rrr,V,S,V},    /* div.b.f */
-  {4,14,rrr,V,S,V},    /* div.h.f */
-  {4,15,rrr,V,S,V},    /* div.w.f */
-  {4,16,rrr,V,S,V},    /* div.l.f */
-};
-struct formstr e0_format1[] = {
-  {0,0,0,0,0,0},
-  {94,0,a3,0,0,0},     /* tst */
-  {95,0,a3,0,0,0},     /* lck */
-  {96,0,a3,0,0,0},     /* ulk */
-  {17,0,a1r,S,0,0},    /* ldea */
-  {97,0,a1r,A,0,0},    /* spawn */
-  {98,0,a1r,A,0,0},    /* ldcmr */
-  {99,0,a2r,A,0,0},    /* stcmr */
-  {100,0,a1r,A,0,0},   /* popr */
-  {101,0,a2r,A,0,0},   /* pshr */
-  {102,7,a1r,A,0,0},   /* rcvr.w */
-  {103,7,a2r,A,0,0},   /* matm.w */
-  {104,7,a2r,A,0,0},   /* sndr.w */
-  {104,8,a2r,S,0,0},   /* sndr.l */
-  {102,8,a1r,S,0,0},   /* rcvr.l */
-  {103,8,a2r,S,0,0},   /* matm.l */
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {105,7,a2r,A,0,0},   /* putr.w */
-  {105,8,a2r,S,0,0},   /* putr.l */
-  {106,7,a1r,A,0,0},   /* getr.w */
-  {106,8,a1r,S,0,0},   /* getr.l */
-  {26,13,a2r,S,0,0},   /* ste.b.f */
-  {26,14,a2r,S,0,0},   /* ste.h.f */
-  {26,15,a2r,S,0,0},   /* ste.w.f */
-  {26,16,a2r,S,0,0},   /* ste.l.f */
-  {107,7,a2r,A,0,0},   /* matr.w */
-  {108,7,a2r,A,0,0},   /* mat.w */
-  {109,7,a1r,A,0,0},   /* get.w */
-  {110,7,a1r,A,0,0},   /* rcv.w */
-  {0,0,0,0,0,0},
-  {111,7,a1r,A,0,0},   /* inc.w */
-  {112,7,a2r,A,0,0},   /* put.w */
-  {113,7,a2r,A,0,0},   /* snd.w */
-  {107,8,a2r,S,0,0},   /* matr.l */
-  {108,8,a2r,S,0,0},   /* mat.l */
-  {109,8,a1r,S,0,0},   /* get.l */
-  {110,8,a1r,S,0,0},   /* rcv.l */
-  {0,0,0,0,0,0},
-  {111,8,a1r,S,0,0},   /* inc.l */
-  {112,8,a2r,S,0,0},   /* put.l */
-  {113,8,a2r,S,0,0},   /* snd.l */
-  {18,13,a1r,V,0,0},   /* ld.b.f */
-  {18,14,a1r,V,0,0},   /* ld.h.f */
-  {18,15,a1r,V,0,0},   /* ld.w.f */
-  {18,16,a1r,V,0,0},   /* ld.l.f */
-  {21,13,a2r,V,0,0},   /* st.b.f */
-  {21,14,a2r,V,0,0},   /* st.h.f */
-  {21,15,a2r,V,0,0},   /* st.w.f */
-  {21,16,a2r,V,0,0},   /* st.l.f */
-};
-struct formstr e0_format2[] = {
-  {28,5,rr,V,V,0},     /* cvtw.b */
-  {28,6,rr,V,V,0},     /* cvtw.h */
-  {29,7,rr,V,V,0},     /* cvtb.w */
-  {30,7,rr,V,V,0},     /* cvth.w */
-  {28,13,rr,V,V,0},    /* cvtw.b.f */
-  {28,14,rr,V,V,0},    /* cvtw.h.f */
-  {29,15,rr,V,V,0},    /* cvtb.w.f */
-  {30,15,rr,V,V,0},    /* cvth.w.f */
-  {31,8,rr,V,V,0},     /* cvts.l */
-  {32,7,rr,V,V,0},     /* cvtd.w */
-  {33,3,rr,V,V,0},     /* cvtl.s */
-  {28,4,rr,V,V,0},     /* cvtw.d */
-  {31,16,rr,V,V,0},    /* cvts.l.f */
-  {32,15,rr,V,V,0},    /* cvtd.w.f */
-  {33,11,rr,V,V,0},    /* cvtl.s.f */
-  {28,12,rr,V,V,0},    /* cvtw.d.f */
-  {114,0,rr,S,S,0},    /* enal */
-  {8,7,rr,S,S,0},      /* shf.w */
-  {115,0,rr,S,S,0},    /* enag */
-  {0,0,0,0,0,0},
-  {28,4,rr,S,S,0},     /* cvtw.d */
-  {32,7,rr,S,S,0},     /* cvtd.w */
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {116,3,rr,S,S,0},    /* frint.s */
-  {116,4,rr,S,S,0},    /* frint.d */
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {116,3,rr,V,V,0},    /* frint.s */
-  {116,4,rr,V,V,0},    /* frint.d */
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {116,11,rr,V,V,0},   /* frint.s.f */
-  {116,12,rr,V,V,0},   /* frint.d.f */
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {81,3,rr,V,V,0},     /* sqrt.s */
-  {81,4,rr,V,V,0},     /* sqrt.d */
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {81,11,rr,V,V,0},    /* sqrt.s.f */
-  {81,12,rr,V,V,0},    /* sqrt.d.f */
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-};
-struct formstr e0_format3[] = {
-  {32,11,rr,V,V,0},    /* cvtd.s.f */
-  {31,12,rr,V,V,0},    /* cvts.d.f */
-  {33,12,rr,V,V,0},    /* cvtl.d.f */
-  {32,16,rr,V,V,0},    /* cvtd.l.f */
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {36,2,rr,V,V,0},     /* tzc.f */
-  {44,2,rr,V,V,0},     /* lop.f */
-  {117,2,rr,V,V,0},    /* xpnd.f */
-  {42,2,rr,V,V,0},     /* not.f */
-  {8,2,rr,S,V,0},      /* shf.f */
-  {35,17,rr,V,V,0},    /* plc.t.f */
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {37,11,rr,V,V,0},    /* eq.s.f */
-  {37,12,rr,V,V,0},    /* eq.d.f */
-  {43,11,rr,V,V,0},    /* neg.s.f */
-  {43,12,rr,V,V,0},    /* neg.d.f */
-  {37,11,rr,S,V,0},    /* eq.s.f */
-  {37,12,rr,S,V,0},    /* eq.d.f */
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {40,11,rr,V,V,0},    /* le.s.f */
-  {40,12,rr,V,V,0},    /* le.d.f */
-  {41,11,rr,V,V,0},    /* lt.s.f */
-  {41,12,rr,V,V,0},    /* lt.d.f */
-  {40,11,rr,S,V,0},    /* le.s.f */
-  {40,12,rr,S,V,0},    /* le.d.f */
-  {41,11,rr,S,V,0},    /* lt.s.f */
-  {41,12,rr,S,V,0},    /* lt.d.f */
-  {37,13,rr,V,V,0},    /* eq.b.f */
-  {37,14,rr,V,V,0},    /* eq.h.f */
-  {37,15,rr,V,V,0},    /* eq.w.f */
-  {37,16,rr,V,V,0},    /* eq.l.f */
-  {37,13,rr,S,V,0},    /* eq.b.f */
-  {37,14,rr,S,V,0},    /* eq.h.f */
-  {37,15,rr,S,V,0},    /* eq.w.f */
-  {37,16,rr,S,V,0},    /* eq.l.f */
-  {40,13,rr,V,V,0},    /* le.b.f */
-  {40,14,rr,V,V,0},    /* le.h.f */
-  {40,15,rr,V,V,0},    /* le.w.f */
-  {40,16,rr,V,V,0},    /* le.l.f */
-  {40,13,rr,S,V,0},    /* le.b.f */
-  {40,14,rr,S,V,0},    /* le.h.f */
-  {40,15,rr,S,V,0},    /* le.w.f */
-  {40,16,rr,S,V,0},    /* le.l.f */
-  {41,13,rr,V,V,0},    /* lt.b.f */
-  {41,14,rr,V,V,0},    /* lt.h.f */
-  {41,15,rr,V,V,0},    /* lt.w.f */
-  {41,16,rr,V,V,0},    /* lt.l.f */
-  {41,13,rr,S,V,0},    /* lt.b.f */
-  {41,14,rr,S,V,0},    /* lt.h.f */
-  {41,15,rr,S,V,0},    /* lt.w.f */
-  {41,16,rr,S,V,0},    /* lt.l.f */
-  {43,13,rr,V,V,0},    /* neg.b.f */
-  {43,14,rr,V,V,0},    /* neg.h.f */
-  {43,15,rr,V,V,0},    /* neg.w.f */
-  {43,16,rr,V,V,0},    /* neg.l.f */
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-};
-struct formstr e0_format4[] = {
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-};
-struct formstr e0_format5[] = {
-  {51,13,rr,V,V,0},    /* ldvi.b.f */
-  {51,14,rr,V,V,0},    /* ldvi.h.f */
-  {51,15,rr,V,V,0},    /* ldvi.w.f */
-  {51,16,rr,V,V,0},    /* ldvi.l.f */
-  {28,11,rr,V,V,0},    /* cvtw.s.f */
-  {31,15,rr,V,V,0},    /* cvts.w.f */
-  {28,16,rr,V,V,0},    /* cvtw.l.f */
-  {33,15,rr,V,V,0},    /* cvtl.w.f */
-  {52,13,rxr,V,V,0},   /* stvi.b.f */
-  {52,14,rxr,V,V,0},   /* stvi.h.f */
-  {52,15,rxr,V,V,0},   /* stvi.w.f */
-  {52,16,rxr,V,V,0},   /* stvi.l.f */
-  {52,13,rxr,S,V,0},   /* stvi.b.f */
-  {52,14,rxr,S,V,0},   /* stvi.h.f */
-  {52,15,rxr,S,V,0},   /* stvi.w.f */
-  {52,16,rxr,S,V,0},   /* stvi.l.f */
-};
-struct formstr e0_format6[] = {
-  {0,0,rxl,S,CIR,0},   /* mov */
-  {0,0,lr,CIR,S,0},    /* mov */
-  {0,0,lr,TOC,S,0},    /* mov */
-  {0,0,lr,CPUID,S,0},  /* mov */
-  {0,0,rxl,S,TTR,0},   /* mov */
-  {0,0,lr,TTR,S,0},    /* mov */
-  {118,0,nops,0,0,0},  /* ctrsl */
-  {119,0,nops,0,0,0},  /* ctrsg */
-  {0,0,rxl,S,VMU,0},   /* mov */
-  {0,0,lr,VMU,S,0},    /* mov */
-  {0,0,rxl,S,VML,0},   /* mov */
-  {0,0,lr,VML,S,0},    /* mov */
-  {0,0,rxl,S,ICR,0},   /* mov */
-  {0,0,lr,ICR,S,0},    /* mov */
-  {0,0,rxl,S,TCPU,0},  /* mov */
-  {0,0,lr,TCPU,S,0},   /* mov */
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {120,0,nops,0,0,0},  /* stop */
-  {0,0,0,0,0,0},
-  {0,0,rxl,S,TID,0},   /* mov */
-  {0,0,lr,TID,S,0},    /* mov */
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-};
-struct formstr e0_format7[] = {
-  {84,13,r,V,0,0},     /* sum.b.f */
-  {84,14,r,V,0,0},     /* sum.h.f */
-  {84,15,r,V,0,0},     /* sum.w.f */
-  {84,16,r,V,0,0},     /* sum.l.f */
-  {85,2,r,V,0,0},      /* all.f */
-  {86,2,r,V,0,0},      /* any.f */
-  {87,2,r,V,0,0},      /* parity.f */
-  {0,0,0,0,0,0},
-  {88,13,r,V,0,0},     /* max.b.f */
-  {88,14,r,V,0,0},     /* max.h.f */
-  {88,15,r,V,0,0},     /* max.w.f */
-  {88,16,r,V,0,0},     /* max.l.f */
-  {89,13,r,V,0,0},     /* min.b.f */
-  {89,14,r,V,0,0},     /* min.h.f */
-  {89,15,r,V,0,0},     /* min.w.f */
-  {89,16,r,V,0,0},     /* min.l.f */
-  {84,11,r,V,0,0},     /* sum.s.f */
-  {84,12,r,V,0,0},     /* sum.d.f */
-  {90,11,r,V,0,0},     /* prod.s.f */
-  {90,12,r,V,0,0},     /* prod.d.f */
-  {88,11,r,V,0,0},     /* max.s.f */
-  {88,12,r,V,0,0},     /* max.d.f */
-  {89,11,r,V,0,0},     /* min.s.f */
-  {89,12,r,V,0,0},     /* min.d.f */
-  {90,13,r,V,0,0},     /* prod.b.f */
-  {90,14,r,V,0,0},     /* prod.h.f */
-  {90,15,r,V,0,0},     /* prod.w.f */
-  {90,16,r,V,0,0},     /* prod.l.f */
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-};
-struct formstr e1_format0[] = {
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {10,18,rrr,S,V,V},   /* sub.s.t */
-  {10,19,rrr,S,V,V},   /* sub.d.t */
-  {4,18,rrr,S,V,V},    /* div.s.t */
-  {4,19,rrr,S,V,V},    /* div.d.t */
-  {3,18,rrr,V,V,V},    /* mul.s.t */
-  {3,19,rrr,V,V,V},    /* mul.d.t */
-  {4,18,rrr,V,V,V},    /* div.s.t */
-  {4,19,rrr,V,V,V},    /* div.d.t */
-  {3,18,rrr,V,S,V},    /* mul.s.t */
-  {3,19,rrr,V,S,V},    /* mul.d.t */
-  {4,18,rrr,V,S,V},    /* div.s.t */
-  {4,19,rrr,V,S,V},    /* div.d.t */
-  {5,1,rrr,V,V,V},     /* and.t */
-  {6,1,rrr,V,V,V},     /* or.t */
-  {7,1,rrr,V,V,V},     /* xor.t */
-  {8,1,rrr,V,V,V},     /* shf.t */
-  {5,1,rrr,V,S,V},     /* and.t */
-  {6,1,rrr,V,S,V},     /* or.t */
-  {7,1,rrr,V,S,V},     /* xor.t */
-  {8,1,rrr,V,S,V},     /* shf.t */
-  {9,18,rrr,V,V,V},    /* add.s.t */
-  {9,19,rrr,V,V,V},    /* add.d.t */
-  {10,18,rrr,V,V,V},   /* sub.s.t */
-  {10,19,rrr,V,V,V},   /* sub.d.t */
-  {9,18,rrr,V,S,V},    /* add.s.t */
-  {9,19,rrr,V,S,V},    /* add.d.t */
-  {10,18,rrr,V,S,V},   /* sub.s.t */
-  {10,19,rrr,V,S,V},   /* sub.d.t */
-  {9,20,rrr,V,V,V},    /* add.b.t */
-  {9,21,rrr,V,V,V},    /* add.h.t */
-  {9,22,rrr,V,V,V},    /* add.w.t */
-  {9,23,rrr,V,V,V},    /* add.l.t */
-  {9,20,rrr,V,S,V},    /* add.b.t */
-  {9,21,rrr,V,S,V},    /* add.h.t */
-  {9,22,rrr,V,S,V},    /* add.w.t */
-  {9,23,rrr,V,S,V},    /* add.l.t */
-  {10,20,rrr,V,V,V},   /* sub.b.t */
-  {10,21,rrr,V,V,V},   /* sub.h.t */
-  {10,22,rrr,V,V,V},   /* sub.w.t */
-  {10,23,rrr,V,V,V},   /* sub.l.t */
-  {10,20,rrr,V,S,V},   /* sub.b.t */
-  {10,21,rrr,V,S,V},   /* sub.h.t */
-  {10,22,rrr,V,S,V},   /* sub.w.t */
-  {10,23,rrr,V,S,V},   /* sub.l.t */
-  {3,20,rrr,V,V,V},    /* mul.b.t */
-  {3,21,rrr,V,V,V},    /* mul.h.t */
-  {3,22,rrr,V,V,V},    /* mul.w.t */
-  {3,23,rrr,V,V,V},    /* mul.l.t */
-  {3,20,rrr,V,S,V},    /* mul.b.t */
-  {3,21,rrr,V,S,V},    /* mul.h.t */
-  {3,22,rrr,V,S,V},    /* mul.w.t */
-  {3,23,rrr,V,S,V},    /* mul.l.t */
-  {4,20,rrr,V,V,V},    /* div.b.t */
-  {4,21,rrr,V,V,V},    /* div.h.t */
-  {4,22,rrr,V,V,V},    /* div.w.t */
-  {4,23,rrr,V,V,V},    /* div.l.t */
-  {4,20,rrr,V,S,V},    /* div.b.t */
-  {4,21,rrr,V,S,V},    /* div.h.t */
-  {4,22,rrr,V,S,V},    /* div.w.t */
-  {4,23,rrr,V,S,V},    /* div.l.t */
-};
-struct formstr e1_format1[] = {
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {26,20,a2r,S,0,0},   /* ste.b.t */
-  {26,21,a2r,S,0,0},   /* ste.h.t */
-  {26,22,a2r,S,0,0},   /* ste.w.t */
-  {26,23,a2r,S,0,0},   /* ste.l.t */
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {18,20,a1r,V,0,0},   /* ld.b.t */
-  {18,21,a1r,V,0,0},   /* ld.h.t */
-  {18,22,a1r,V,0,0},   /* ld.w.t */
-  {18,23,a1r,V,0,0},   /* ld.l.t */
-  {21,20,a2r,V,0,0},   /* st.b.t */
-  {21,21,a2r,V,0,0},   /* st.h.t */
-  {21,22,a2r,V,0,0},   /* st.w.t */
-  {21,23,a2r,V,0,0},   /* st.l.t */
-};
-struct formstr e1_format2[] = {
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {28,20,rr,V,V,0},    /* cvtw.b.t */
-  {28,21,rr,V,V,0},    /* cvtw.h.t */
-  {29,22,rr,V,V,0},    /* cvtb.w.t */
-  {30,22,rr,V,V,0},    /* cvth.w.t */
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {31,23,rr,V,V,0},    /* cvts.l.t */
-  {32,22,rr,V,V,0},    /* cvtd.w.t */
-  {33,18,rr,V,V,0},    /* cvtl.s.t */
-  {28,19,rr,V,V,0},    /* cvtw.d.t */
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {116,18,rr,V,V,0},   /* frint.s.t */
-  {116,19,rr,V,V,0},   /* frint.d.t */
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {81,18,rr,V,V,0},    /* sqrt.s.t */
-  {81,19,rr,V,V,0},    /* sqrt.d.t */
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-};
-struct formstr e1_format3[] = {
-  {32,18,rr,V,V,0},    /* cvtd.s.t */
-  {31,19,rr,V,V,0},    /* cvts.d.t */
-  {33,19,rr,V,V,0},    /* cvtl.d.t */
-  {32,23,rr,V,V,0},    /* cvtd.l.t */
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {36,1,rr,V,V,0},     /* tzc.t */
-  {44,1,rr,V,V,0},     /* lop.t */
-  {117,1,rr,V,V,0},    /* xpnd.t */
-  {42,1,rr,V,V,0},     /* not.t */
-  {8,1,rr,S,V,0},      /* shf.t */
-  {35,24,rr,V,V,0},    /* plc.t.t */
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {37,18,rr,V,V,0},    /* eq.s.t */
-  {37,19,rr,V,V,0},    /* eq.d.t */
-  {43,18,rr,V,V,0},    /* neg.s.t */
-  {43,19,rr,V,V,0},    /* neg.d.t */
-  {37,18,rr,S,V,0},    /* eq.s.t */
-  {37,19,rr,S,V,0},    /* eq.d.t */
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {40,18,rr,V,V,0},    /* le.s.t */
-  {40,19,rr,V,V,0},    /* le.d.t */
-  {41,18,rr,V,V,0},    /* lt.s.t */
-  {41,19,rr,V,V,0},    /* lt.d.t */
-  {40,18,rr,S,V,0},    /* le.s.t */
-  {40,19,rr,S,V,0},    /* le.d.t */
-  {41,18,rr,S,V,0},    /* lt.s.t */
-  {41,19,rr,S,V,0},    /* lt.d.t */
-  {37,20,rr,V,V,0},    /* eq.b.t */
-  {37,21,rr,V,V,0},    /* eq.h.t */
-  {37,22,rr,V,V,0},    /* eq.w.t */
-  {37,23,rr,V,V,0},    /* eq.l.t */
-  {37,20,rr,S,V,0},    /* eq.b.t */
-  {37,21,rr,S,V,0},    /* eq.h.t */
-  {37,22,rr,S,V,0},    /* eq.w.t */
-  {37,23,rr,S,V,0},    /* eq.l.t */
-  {40,20,rr,V,V,0},    /* le.b.t */
-  {40,21,rr,V,V,0},    /* le.h.t */
-  {40,22,rr,V,V,0},    /* le.w.t */
-  {40,23,rr,V,V,0},    /* le.l.t */
-  {40,20,rr,S,V,0},    /* le.b.t */
-  {40,21,rr,S,V,0},    /* le.h.t */
-  {40,22,rr,S,V,0},    /* le.w.t */
-  {40,23,rr,S,V,0},    /* le.l.t */
-  {41,20,rr,V,V,0},    /* lt.b.t */
-  {41,21,rr,V,V,0},    /* lt.h.t */
-  {41,22,rr,V,V,0},    /* lt.w.t */
-  {41,23,rr,V,V,0},    /* lt.l.t */
-  {41,20,rr,S,V,0},    /* lt.b.t */
-  {41,21,rr,S,V,0},    /* lt.h.t */
-  {41,22,rr,S,V,0},    /* lt.w.t */
-  {41,23,rr,S,V,0},    /* lt.l.t */
-  {43,20,rr,V,V,0},    /* neg.b.t */
-  {43,21,rr,V,V,0},    /* neg.h.t */
-  {43,22,rr,V,V,0},    /* neg.w.t */
-  {43,23,rr,V,V,0},    /* neg.l.t */
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-};
-struct formstr e1_format4[] = {
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-};
-struct formstr e1_format5[] = {
-  {51,20,rr,V,V,0},    /* ldvi.b.t */
-  {51,21,rr,V,V,0},    /* ldvi.h.t */
-  {51,22,rr,V,V,0},    /* ldvi.w.t */
-  {51,23,rr,V,V,0},    /* ldvi.l.t */
-  {28,18,rr,V,V,0},    /* cvtw.s.t */
-  {31,22,rr,V,V,0},    /* cvts.w.t */
-  {28,23,rr,V,V,0},    /* cvtw.l.t */
-  {33,22,rr,V,V,0},    /* cvtl.w.t */
-  {52,20,rxr,V,V,0},   /* stvi.b.t */
-  {52,21,rxr,V,V,0},   /* stvi.h.t */
-  {52,22,rxr,V,V,0},   /* stvi.w.t */
-  {52,23,rxr,V,V,0},   /* stvi.l.t */
-  {52,20,rxr,S,V,0},   /* stvi.b.t */
-  {52,21,rxr,S,V,0},   /* stvi.h.t */
-  {52,22,rxr,S,V,0},   /* stvi.w.t */
-  {52,23,rxr,S,V,0},   /* stvi.l.t */
-};
-struct formstr e1_format6[] = {
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-};
-struct formstr e1_format7[] = {
-  {84,20,r,V,0,0},     /* sum.b.t */
-  {84,21,r,V,0,0},     /* sum.h.t */
-  {84,22,r,V,0,0},     /* sum.w.t */
-  {84,23,r,V,0,0},     /* sum.l.t */
-  {85,1,r,V,0,0},      /* all.t */
-  {86,1,r,V,0,0},      /* any.t */
-  {87,1,r,V,0,0},      /* parity.t */
-  {0,0,0,0,0,0},
-  {88,20,r,V,0,0},     /* max.b.t */
-  {88,21,r,V,0,0},     /* max.h.t */
-  {88,22,r,V,0,0},     /* max.w.t */
-  {88,23,r,V,0,0},     /* max.l.t */
-  {89,20,r,V,0,0},     /* min.b.t */
-  {89,21,r,V,0,0},     /* min.h.t */
-  {89,22,r,V,0,0},     /* min.w.t */
-  {89,23,r,V,0,0},     /* min.l.t */
-  {84,18,r,V,0,0},     /* sum.s.t */
-  {84,19,r,V,0,0},     /* sum.d.t */
-  {90,18,r,V,0,0},     /* prod.s.t */
-  {90,19,r,V,0,0},     /* prod.d.t */
-  {88,18,r,V,0,0},     /* max.s.t */
-  {88,19,r,V,0,0},     /* max.d.t */
-  {89,18,r,V,0,0},     /* min.s.t */
-  {89,19,r,V,0,0},     /* min.d.t */
-  {90,20,r,V,0,0},     /* prod.b.t */
-  {90,21,r,V,0,0},     /* prod.h.t */
-  {90,22,r,V,0,0},     /* prod.w.t */
-  {90,23,r,V,0,0},     /* prod.l.t */
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-  {0,0,0,0,0,0},
-};
-char *lop[] = {
-  "mov",       /* 0 */
-  "merg",      /* 1 */
-  "mask",      /* 2 */
-  "mul",       /* 3 */
-  "div",       /* 4 */
-  "and",       /* 5 */
-  "or",        /* 6 */
-  "xor",       /* 7 */
-  "shf",       /* 8 */
-  "add",       /* 9 */
-  "sub",       /* 10 */
-  "exit",      /* 11 */
-  "jmp",       /* 12 */
-  "jmpi",      /* 13 */
-  "jmpa",      /* 14 */
-  "jmps",      /* 15 */
-  "tac",       /* 16 */
-  "ldea",      /* 17 */
-  "ld",        /* 18 */
-  "tas",       /* 19 */
-  "pshea",     /* 20 */
-  "st",        /* 21 */
-  "call",      /* 22 */
-  "calls",     /* 23 */
-  "callq",     /* 24 */
-  "pfork",     /* 25 */
-  "ste",       /* 26 */
-  "incr",      /* 27 */
-  "cvtw",      /* 28 */
-  "cvtb",      /* 29 */
-  "cvth",      /* 30 */
-  "cvts",      /* 31 */
-  "cvtd",      /* 32 */
-  "cvtl",      /* 33 */
-  "ldpa",      /* 34 */
-  "plc",       /* 35 */
-  "tzc",       /* 36 */
-  "eq",        /* 37 */
-  "leu",       /* 38 */
-  "ltu",       /* 39 */
-  "le",        /* 40 */
-  "lt",        /* 41 */
-  "not",       /* 42 */
-  "neg",       /* 43 */
-  "lop",       /* 44 */
-  "cprs",      /* 45 */
-  "nop",       /* 46 */
-  "br",        /* 47 */
-  "bri",       /* 48 */
-  "bra",       /* 49 */
-  "brs",       /* 50 */
-  "ldvi",      /* 51 */
-  "stvi",      /* 52 */
-  "ldsdr",     /* 53 */
-  "ldkdr",     /* 54 */
-  "ln",        /* 55 */
-  "patu",      /* 56 */
-  "pate",      /* 57 */
-  "pich",      /* 58 */
-  "plch",      /* 59 */
-  "idle",      /* 60 */
-  "rtnq",      /* 61 */
-  "cfork",     /* 62 */
-  "rtn",       /* 63 */
-  "wfork",     /* 64 */
-  "join",      /* 65 */
-  "rtnc",      /* 66 */
-  "exp",       /* 67 */
-  "sin",       /* 68 */
-  "cos",       /* 69 */
-  "psh",       /* 70 */
-  "pop",       /* 71 */
-  "eni",       /* 72 */
-  "dsi",       /* 73 */
-  "bkpt",      /* 74 */
-  "msync",     /* 75 */
-  "mski",      /* 76 */
-  "xmti",      /* 77 */
-  "tstvv",     /* 78 */
-  "diag",      /* 79 */
-  "pbkpt",     /* 80 */
-  "sqrt",      /* 81 */
-  "casr",      /* 82 */
-  "atan",      /* 83 */
-  "sum",       /* 84 */
-  "all",       /* 85 */
-  "any",       /* 86 */
-  "parity",    /* 87 */
-  "max",       /* 88 */
-  "min",       /* 89 */
-  "prod",      /* 90 */
-  "halt",      /* 91 */
-  "sysc",      /* 92 */
-  "trap",      /* 93 */
-  "tst",       /* 94 */
-  "lck",       /* 95 */
-  "ulk",       /* 96 */
-  "spawn",     /* 97 */
-  "ldcmr",     /* 98 */
-  "stcmr",     /* 99 */
-  "popr",      /* 100 */
-  "pshr",      /* 101 */
-  "rcvr",      /* 102 */
-  "matm",      /* 103 */
-  "sndr",      /* 104 */
-  "putr",      /* 105 */
-  "getr",      /* 106 */
-  "matr",      /* 107 */
-  "mat",       /* 108 */
-  "get",       /* 109 */
-  "rcv",       /* 110 */
-  "inc",       /* 111 */
-  "put",       /* 112 */
-  "snd",       /* 113 */
-  "enal",      /* 114 */
-  "enag",      /* 115 */
-  "frint",     /* 116 */
-  "xpnd",      /* 117 */
-  "ctrsl",     /* 118 */
-  "ctrsg",     /* 119 */
-  "stop",      /* 120 */
-};
-char *rop[] = {
-  "",  /* 0 */
-  ".t",        /* 1 */
-  ".f",        /* 2 */
-  ".s",        /* 3 */
-  ".d",        /* 4 */
-  ".b",        /* 5 */
-  ".h",        /* 6 */
-  ".w",        /* 7 */
-  ".l",        /* 8 */
-  ".x",        /* 9 */
-  ".u",        /* 10 */
-  ".s.f",      /* 11 */
-  ".d.f",      /* 12 */
-  ".b.f",      /* 13 */
-  ".h.f",      /* 14 */
-  ".w.f",      /* 15 */
-  ".l.f",      /* 16 */
-  ".t.f",      /* 17 */
-  ".s.t",      /* 18 */
-  ".d.t",      /* 19 */
-  ".b.t",      /* 20 */
-  ".h.t",      /* 21 */
-  ".w.t",      /* 22 */
-  ".l.t",      /* 23 */
-  ".t.t",      /* 24 */
-};
diff --git a/gdb/cplus-dem.c b/gdb/cplus-dem.c
deleted file mode 100644 (file)
index b9c6288..0000000
+++ /dev/null
@@ -1,2280 +0,0 @@
-/* Demangler for GNU C++ 
-   Copyright 1989, 1991 Free Software Foundation, Inc.
-   Written by James Clark (jjc@jclark.uucp)
-   Rewritten by Fred Fish (fnf@cygnus.com) for ARM and Lucid demangling
-   
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
-   any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software
-   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-/* This is for g++ 1.95.03 (November 13 version).  */
-
-/* This file exports two functions; cplus_mangle_opname and cplus_demangle.
-
-   This file imports xmalloc and xrealloc, which are like malloc and
-   realloc except that they generate a fatal error if there is no
-   available memory. */
-
-/* GDB-specific, FIXME.  */
-#include "defs.h"
-#include "demangle.h"
-
-#include <ctype.h>
-#include <string.h>
-
-/* In order to allow a single demangler executable to demangle strings
-   using various common values of CPLUS_MARKER, as well as any specific
-   one set at compile time, we maintain a string containing all the
-   commonly used ones, and check to see if the marker we are looking for
-   is in that string.  CPLUS_MARKER is usually '$' on systems where the
-   assembler can deal with that.  Where the assembler can't, it's usually
-   '.' (but on many systems '.' is used for other things).  We put the
-   current defined CPLUS_MARKER first (which defaults to '$'), followed
-   by the next most common value, followed by an explicit '$' in case
-   the value of CPLUS_MARKER is not '$'.
-
-   We could avoid this if we could just get g++ to tell us what the actual
-   cplus marker character is as part of the debug information, perhaps by
-   ensuring that it is the character that terminates the gcc<n>_compiled
-   marker symbol (FIXME). */
-
-#if !defined (CPLUS_MARKER)
-#define CPLUS_MARKER '$'
-#endif
-
-static const char cplus_markers[] = { CPLUS_MARKER, '.', '$', '\0' };
-
-#ifndef __STDC__
-#define const
-#endif
-
-/* Stuff that is shared between sub-routines.
- * Using a shared structure allows cplus_demangle to be reentrant. */
-
-struct work_stuff
-{
-  int options;
-  char **typevec;
-  int ntypes;
-  int typevec_size;
-  int constructor;
-  int destructor;
-  int static_type;     /* A static member function */
-  int const_type;      /* A const member function */
-};
-
-#define PRINT_ANSI_QUALIFIERS (work -> options & DMGL_ANSI)
-#define PRINT_ARG_TYPES       (work -> options & DMGL_PARAMS)
-
-static const struct optable
-{
-  const char *in;
-  const char *out;
-  int flags;
-} optable[] = {
-  "nw",                  " new",       DMGL_ANSI,      /* new (1.92,    ansi) */
-  "dl",                  " delete",    DMGL_ANSI,      /* new (1.92,    ansi) */
-  "new",         " new",       0,              /* old (1.91,    and 1.x) */
-  "delete",      " delete",    0,              /* old (1.91,    and 1.x) */
-  "as",                  "=",          DMGL_ANSI,      /* ansi */
-  "ne",                  "!=",         DMGL_ANSI,      /* old, ansi */
-  "eq",                  "==",         DMGL_ANSI,      /* old, ansi */
-  "ge",                  ">=",         DMGL_ANSI,      /* old, ansi */
-  "gt",                  ">",          DMGL_ANSI,      /* old, ansi */
-  "le",                  "<=",         DMGL_ANSI,      /* old, ansi */
-  "lt",                  "<",          DMGL_ANSI,      /* old, ansi */
-  "plus",        "+",          0,              /* old */
-  "pl",                  "+",          DMGL_ANSI,      /* ansi */
-  "apl",         "+=",         DMGL_ANSI,      /* ansi */
-  "minus",       "-",          0,              /* old */
-  "mi",                  "-",          DMGL_ANSI,      /* ansi */
-  "ami",         "-=",         DMGL_ANSI,      /* ansi */
-  "mult",        "*",          0,              /* old */
-  "ml",                  "*",          DMGL_ANSI,      /* ansi */
-  "amu",         "*=",         DMGL_ANSI,      /* ansi (ARM/Lucid) */
-  "aml",         "*=",         DMGL_ANSI,      /* ansi (GNU/g++) */
-  "convert",     "+",          0,              /* old (unary +) */
-  "negate",      "-",          0,              /* old (unary -) */
-  "trunc_mod",   "%",          0,              /* old */
-  "md",                  "%",          DMGL_ANSI,      /* ansi */
-  "amd",         "%=",         DMGL_ANSI,      /* ansi */
-  "trunc_div",   "/",          0,              /* old */
-  "dv",                  "/",          DMGL_ANSI,      /* ansi */
-  "adv",         "/=",         DMGL_ANSI,      /* ansi */
-  "truth_andif",  "&&",                0,              /* old */
-  "aa",                  "&&",         DMGL_ANSI,      /* ansi */
-  "truth_orif",          "||",         0,              /* old */
-  "oo",                  "||",         DMGL_ANSI,      /* ansi */
-  "truth_not",   "!",          0,              /* old */
-  "nt",                  "!",          DMGL_ANSI,      /* ansi */
-  "postincrement","++",                0,              /* old */
-  "pp",                  "++",         DMGL_ANSI,      /* ansi */
-  "postdecrement","--",                0,              /* old */
-  "mm",                  "--",         DMGL_ANSI,      /* ansi */
-  "bit_ior",     "|",          0,              /* old */
-  "or",                  "|",          DMGL_ANSI,      /* ansi */
-  "aor",         "|=",         DMGL_ANSI,      /* ansi */
-  "bit_xor",     "^",          0,              /* old */
-  "er",                  "^",          DMGL_ANSI,      /* ansi */
-  "aer",         "^=",         DMGL_ANSI,      /* ansi */
-  "bit_and",     "&",          0,              /* old */
-  "ad",                  "&",          DMGL_ANSI,      /* ansi */
-  "aad",         "&=",         DMGL_ANSI,      /* ansi */
-  "bit_not",     "~",          0,              /* old */
-  "co",                  "~",          DMGL_ANSI,      /* ansi */
-  "call",        "()",         0,              /* old */
-  "cl",                  "()",         DMGL_ANSI,      /* ansi */
-  "alshift",     "<<",         0,              /* old */
-  "ls",                  "<<",         DMGL_ANSI,      /* ansi */
-  "als",         "<<=",        DMGL_ANSI,      /* ansi */
-  "arshift",     ">>",         0,              /* old */
-  "rs",                  ">>",         DMGL_ANSI,      /* ansi */
-  "ars",         ">>=",        DMGL_ANSI,      /* ansi */
-  "component",   "->",         0,              /* old */
-  "pt",                  "->",         DMGL_ANSI,      /* ansi; Lucid C++ form */
-  "rf",                  "->",         DMGL_ANSI,      /* ansi; ARM/GNU form */
-  "indirect",    "*",          0,              /* old */
-  "method_call",  "->()",      0,              /* old */
-  "addr",        "&",          0,              /* old (unary &) */
-  "array",       "[]",         0,              /* old */
-  "vc",                  "[]",         DMGL_ANSI,      /* ansi */
-  "compound",    ", ",         0,              /* old */
-  "cm",                  ", ",         DMGL_ANSI,      /* ansi */
-  "cond",        "?:",         0,              /* old */
-  "cn",                  "?:",         DMGL_ANSI,      /* psuedo-ansi */
-  "max",         ">?",         0,              /* old */
-  "mx",                  ">?",         DMGL_ANSI,      /* psuedo-ansi */
-  "min",         "<?",         0,              /* old */
-  "mn",                  "<?",         DMGL_ANSI,      /* psuedo-ansi */
-  "nop",         "",           0,              /* old (for operator=) */
-  "rm",                  "->*",        DMGL_ANSI,      /* ansi */
-};
-
-
-typedef struct string          /* Beware: these aren't required to be */
-{                              /*  '\0' terminated. */
-  char *b;                     /* pointer to start of string */
-  char *p;                     /* pointer after last character */
-  char *e;                     /* pointer after end of allocated space */
-} string;
-
-#define STRING_EMPTY(str)      ((str) -> b == (str) -> p)
-#define PREPEND_BLANK(str)     {if (!STRING_EMPTY(str)) \
-                                  string_prepend(str, " ");}
-#define APPEND_BLANK(str)      {if (!STRING_EMPTY(str)) \
-                                  string_append(str, " ");}
-
-#define ARM_VTABLE_STRING "__vtbl__"   /* Lucid/cfront virtual table prefix */
-#define ARM_VTABLE_STRLEN 8            /* strlen (ARM_VTABLE_STRING) */
-
-/* Prototypes for local functions */
-
-static char *
-mop_up PARAMS ((struct work_stuff *, string *, int));
-
-#if 0
-static int
-demangle_method_args PARAMS ((struct work_stuff *work, const char **, string *));
-#endif
-
-static int
-demangle_template PARAMS ((struct work_stuff *work, const char **, string *));
-
-static int
-demangle_qualified PARAMS ((struct work_stuff *, const char **, string *,
-                           int));
-
-static int
-demangle_class PARAMS ((struct work_stuff *, const char **, string *));
-
-static int
-demangle_fund_type PARAMS ((struct work_stuff *, const char **, string *));
-
-static int
-demangle_signature PARAMS ((struct work_stuff *, const char **, string *));
-
-static int
-demangle_prefix PARAMS ((struct work_stuff *, const char **, string *));
-
-static int
-gnu_special PARAMS ((struct work_stuff *, const char **, string *));
-
-static int
-cfront_special PARAMS ((struct work_stuff *, const char **, string *));
-
-static void
-string_need PARAMS ((string *, int));
-
-static void
-string_delete PARAMS ((string *));
-
-static void
-string_init PARAMS ((string *));
-
-static void
-string_clear PARAMS ((string *));
-
-#if 0
-static int
-string_empty PARAMS ((string *));
-#endif
-
-static void
-string_append PARAMS ((string *, const char *));
-
-static void
-string_appends PARAMS ((string *, string *));
-
-static void
-string_appendn PARAMS ((string *, const char *, int));
-
-static void
-string_prepend PARAMS ((string *, const char *));
-
-static void
-string_prependn PARAMS ((string *, const char *, int));
-
-static int
-get_count PARAMS ((const char **, int *));
-
-static int
-consume_count PARAMS ((const char **));
-
-static int
-demangle_args PARAMS ((struct work_stuff *, const char **, string *));
-
-static int
-do_type PARAMS ((struct work_stuff *, const char **, string *));
-
-static int
-do_arg PARAMS ((struct work_stuff *, const char **, string *));
-
-static void
-demangle_function_name PARAMS ((struct work_stuff *, const char **, string *,
-                               const char *));
-
-static void
-remember_type PARAMS ((struct work_stuff *, const char *, int));
-
-static void
-forget_types PARAMS ((struct work_stuff *));
-
-#if 0
-static void
-string_prepends PARAMS ((string *, string *));
-#endif
-
-/*  Translate count to integer, consuming tokens in the process.
-    Conversion terminates on the first non-digit character. */
-
-static int
-consume_count (type)
-    const char **type;
-{
-    int count = 0;
-
-    do
-      {
-       count *= 10;
-       count += **type - '0';
-       (*type)++;
-      } while (isdigit (**type));
-    return (count);
-}
-
-/* Takes operator name as e.g. "++" and returns mangled
-   operator name (e.g. "postincrement_expr"), or NULL if not found.
-
-   If OPTIONS & DMGL_ANSI == 1, return the ANSI name;
-   if OPTIONS & DMGL_ANSI == 0, return the old GNU name.  */
-
-char *
-cplus_mangle_opname (opname, options)
-     char *opname;
-     int options;
-{
-  int i;
-  int len;
-
-  len = strlen (opname);
-  for (i = 0; i < sizeof (optable) / sizeof (optable[0]); i++)
-    {
-      if (strlen (optable[i].out) == len
-         && (options & DMGL_ANSI) == (optable[i].flags & DMGL_ANSI)
-         && memcmp (optable[i].out, opname, len) == 0)
-       return ((char *)optable[i].in);
-    }
-  return (0);
-}
-
-/* char *cplus_demangle (const char *name, int options)
-
-   If NAME is a mangled function name produced by GNU C++, then
-   a pointer to a malloced string giving a C++ representation
-   of the name will be returned; otherwise NULL will be returned.
-   It is the caller's responsibility to free the string which
-   is returned.
-
-   The OPTIONS arg may contain one or more of the following bits:
-
-       DMGL_ANSI       ANSI qualifiers such as `const' and `void' are
-                       included.
-       DMGL_PARAMS     Function parameters are included.
-
-   For example,
-   
-   cplus_demangle ("foo__1Ai", DMGL_PARAMS)            => "A::foo(int)"
-   cplus_demangle ("foo__1Ai", DMGL_PARAMS | DMGL_ANSI)        => "A::foo(int)"
-   cplus_demangle ("foo__1Ai", 0)                      => "A::foo"
-
-   cplus_demangle ("foo__1Afe", DMGL_PARAMS)           => "A::foo(float,...)"
-   cplus_demangle ("foo__1Afe", DMGL_PARAMS | DMGL_ANSI)=> "A::foo(float,...)"
-   cplus_demangle ("foo__1Afe", 0)                     => "A::foo"
-
-   Note that any leading underscores, or other such characters prepended by
-   the compilation system, are presumed to have already been stripped from
-   TYPE.  */
-
-char *
-cplus_demangle (mangled, options)
-     const char *mangled;
-     int options;
-{
-  string decl;
-  int success = 0;
-  struct work_stuff work[1];
-  char *demangled = NULL;
-
-  if ((mangled != NULL) && (*mangled != '\0'))
-    {
-      memset ((char *) work, 0, sizeof (work));
-      work -> options = options;
-      
-      string_init (&decl);
-
-      /* First check to see if gnu style demangling is active and if the
-        string to be demangled contains a CPLUS_MARKER.  If so, attempt to
-        recognize one of the gnu special forms rather than looking for a
-        standard prefix.  In particular, don't worry about whether there
-        is a "__" string in the mangled string.  Consider "_$_5__foo" for
-        example. */
-
-      if ((AUTO_DEMANGLING || GNU_DEMANGLING)
-         && (strpbrk (mangled, cplus_markers)) != NULL)
-       {
-         success = gnu_special (work, &mangled, &decl);
-       }
-      else
-       {
-         success = demangle_prefix (work, &mangled, &decl);
-       }
-      if (success && (*mangled != '\0'))
-       {
-         success = demangle_signature (work, &mangled, &decl);
-       }
-      demangled = mop_up (work, &decl, success);
-    }
-  return (demangled);
-}
-
-static char *
-mop_up (work, declp, success)
-     struct work_stuff *work;
-     string *declp;
-     int success;
-{
-  int i;
-  char *demangled = NULL;
-
-  /* Discard the remembered types, if any. */
-  
-  forget_types (work);
-  if (work -> typevec != NULL)
-    {
-      free ((char *) work -> typevec);
-    }
-  
-  /* If demangling was successful, ensure that the demangled string is null
-     terminated and return it.  Otherwise, free the demangling decl. */
-  
-  if (!success)
-    {
-      string_delete (declp);
-    }
-  else
-    {
-      string_appendn (declp, "", 1);
-      demangled = declp -> b;
-    }
-  return (demangled);
-}
-
-/*
-
-LOCAL FUNCTION
-
-       demangle_signature -- demangle the signature part of a mangled name
-
-SYNOPSIS
-
-       static int
-       demangle_signature (struct work_stuff *work, const char **mangled,
-                           string *declp);
-
-DESCRIPTION
-
-       Consume and demangle the signature portion of the mangled name.
-
-       DECLP is the string where demangled output is being built.  At
-       entry it contains the demangled root name from the mangled name
-       prefix.  I.E. either a demangled operator name or the root function
-       name.  In some special cases, it may contain nothing.
-
-       *MANGLED points to the current unconsumed location in the mangled
-       name.  As tokens are consumed and demangling is performed, the
-       pointer is updated to continuously point at the next token to
-       be consumed.
-
-       Demangling GNU style mangled names is nasty because there is no
-       explicit token that marks the start of the outermost function
-       argument list.
-*/
-
-static int
-demangle_signature (work, mangled, declp)
-     struct work_stuff *work;
-     const char **mangled;
-     string *declp;
-{
-  int success = 1;
-  int func_done = 0;
-  int expect_func = 0;
-  const char *oldmangled;
-
-  while (success && (**mangled != '\0'))
-    {
-      switch (**mangled)
-       {
-         case 'Q':
-           oldmangled = *mangled;
-           success = demangle_qualified (work, mangled, declp, 1);
-           if (success)
-             {
-               remember_type (work, oldmangled, *mangled - oldmangled);
-             }
-           if (AUTO_DEMANGLING || GNU_DEMANGLING)
-             {
-               expect_func = 1;
-             }
-           break;
-         
-         case 'S':
-           /* Static member function */
-           (*mangled)++;
-           work -> static_type = 1;
-           break;
-
-         case 'C':
-           /* a const member function */
-           (*mangled)++;
-           work -> const_type = 1;
-           break;
-         
-         case '0': case '1': case '2': case '3': case '4':
-         case '5': case '6': case '7': case '8': case '9':
-           oldmangled = *mangled;
-           success = demangle_class (work, mangled, declp);
-           if (success)
-             {
-               remember_type (work, oldmangled, *mangled - oldmangled);
-             }
-           if (AUTO_DEMANGLING || GNU_DEMANGLING)
-             {
-               expect_func = 1;
-             }
-           break;
-         
-         case 'F':
-           /* Function */
-           /* ARM style demangling includes a specific 'F' character after
-            the class name.  For GNU style, it is just implied.  So we can
-            safely just consume any 'F' at this point and be compatible
-            with either style. */
-
-           func_done = 1;
-           (*mangled)++;
-
-           /* For lucid/cfront style we have to forget any types we might
-              have remembered up to this point, since they were not argument
-              types.  GNU style considers all types seen as available for
-              back references.  See comment in demangle_args() */
-
-           if (LUCID_DEMANGLING || CFRONT_DEMANGLING)
-             {
-               forget_types (work);
-             }
-           success = demangle_args (work, mangled, declp);
-           break;
-         
-         case 't':
-           /* Template */
-           success = demangle_template (work, mangled, declp);
-           break;
-
-         case '_':
-           /* At the outermost level, we cannot have a return type specified,
-              so if we run into another '_' at this point we are dealing with
-              a mangled name that is either bogus, or has been mangled by
-              some algorithm we don't know how to deal with.  So just
-              reject the entire demangling. */
-           success = 0;
-           break;
-
-         default:
-           if (AUTO_DEMANGLING || GNU_DEMANGLING)
-             {
-               /* Assume we have stumbled onto the first outermost function
-                  argument token, and start processing args. */
-               func_done = 1;
-               success = demangle_args (work, mangled, declp);
-             }
-           else
-             {
-               /* Non-GNU demanglers use a specific token to mark the start
-                  of the outermost function argument tokens.  Typically 'F',
-                  for ARM-demangling, for example.  So if we find something
-                  we are not prepared for, it must be an error. */
-               success = 0;
-             }
-           break;
-       }
-      if (AUTO_DEMANGLING || GNU_DEMANGLING)
-       {
-         if (success && expect_func)
-           {
-             func_done = 1;
-             success = demangle_args (work, mangled, declp);
-           }
-       }
-    }
-  if (success && !func_done)
-    {
-      if (AUTO_DEMANGLING || GNU_DEMANGLING)
-       {
-         /* With GNU style demangling, bar__3foo is 'foo::bar(void)', and
-            bar__3fooi is 'foo::bar(int)'.  We get here when we find the
-            first case, and need to ensure that the '(void)' gets added to
-            the current declp.  Note that with ARM, the first case
-            represents the name of a static data member 'foo::bar',
-            which is in the current declp, so we leave it alone. */
-         success = demangle_args (work, mangled, declp);
-       }
-    }
-  if (success && work -> static_type && PRINT_ARG_TYPES)
-    {
-      string_append (declp, " static");
-    }
-  if (success && work -> const_type && PRINT_ARG_TYPES)
-    {
-      string_append (declp, " const");
-    }
-  return (success);
-}
-
-#if 0
-
-static int
-demangle_method_args (work, mangled, declp)
-     struct work_stuff *work;
-     const char **mangled;
-     string *declp;
-{
-  int success = 0;
-
-  if (work -> static_type)
-    {
-      string_append (declp, *mangled + 1);
-      *mangled += strlen (*mangled);
-      success = 1;
-    }
-  else
-    {
-      success = demangle_args (work, mangled, declp);
-    }
-  return (success);
-}
-
-#endif
-
-static int
-demangle_template (work, mangled, declp)
-     struct work_stuff *work;
-     const char **mangled;
-     string *declp;
-{
-  int i;
-  string tname;
-  string trawname;
-  int is_pointer;
-  int is_real;
-  int is_integral;
-  int r;
-  int need_comma = 0;
-  int success = 0;
-  int done;
-  const char *old_p;
-  int symbol_len;
-  string temp;
-
-  (*mangled)++;
-  string_init (&tname);
-  string_init (&trawname);
-  /* get template name */
-  if (!get_count (mangled, &r))
-    {
-      return (0);
-    }
-  string_appendn (&tname, *mangled, r);
-  string_appendn (&trawname, *mangled, r);
-  string_appendn (&trawname, "", 1);
-  *mangled += r;
-  string_append (&tname, "<");
-  /* get size of template parameter list */
-  if (!get_count (mangled, &r))
-    {
-      return (0);
-    }
-  for (i = 0; i < r; i++)
-    {
-      if (need_comma)
-       {
-         string_append (&tname, ", ");
-       }
-      /* Z for type parameters */
-      if (**mangled == 'Z')
-       {
-         (*mangled)++;
-         success = do_type (work, mangled, &temp);
-         string_appendn (&temp, "", 1);
-         if (success)
-           {
-             string_append (&tname, temp.b);
-           }
-         string_delete(&temp);
-         if (!success)
-           {
-             break;
-           }
-       }
-      else
-       {
-         /* otherwise, value parameter */
-         old_p  = *mangled;
-         is_pointer = 0;
-         is_real = 0;
-         is_integral = 0;
-         done = 0;
-         success = do_type (work, mangled, &temp);
-         string_appendn (&temp, "", 1);
-         if (success)
-           {
-             string_append (&tname, temp.b);
-           }
-         string_delete(&temp);
-         if (!success)
-           {
-             break;
-           }
-         string_append (&tname, "=");
-         while (*old_p && !done)
-           {   
-             switch (*old_p)
-               {
-                 case 'P':
-                 case 'R':
-                   done = is_pointer = 1;
-                   break;
-                 case 'C':     /* const */
-                 case 'S':     /* explicitly signed [char] */
-                 case 'U':     /* unsigned */
-                 case 'V':     /* volatile */
-                 case 'F':     /* function */
-                 case 'M':     /* member function */
-                 case 'O':     /* ??? */
-                   old_p++;
-                   continue;
-                 case 'Q':     /* repetition of following */
-                 case 'T':     /* remembered type */
-                   abort ();
-                   break;
-                 case 'v':     /* void */
-                   abort ();
-                   break;
-                 case 'x':     /* long long */
-                 case 'l':     /* long */
-                 case 'i':     /* int */
-                 case 's':     /* short */
-                 case 'c':     /* char */
-                   done = is_integral = 1;
-                   break;
-                 case 'r':     /* long double */
-                 case 'd':     /* double */
-                 case 'f':     /* float */
-                   done = is_real = 1;
-                   break;
-                 default:
-                   abort ();
-               }
-           }
-         if (is_integral)
-           {
-             if (**mangled == 'm')
-               {
-                 string_appendn (&tname, "-", 1);
-                 (*mangled)++;
-               }
-             while (isdigit (**mangled))       
-               {
-                 string_appendn (&tname, *mangled, 1);
-                 (*mangled)++;
-               }
-           }
-         else if (is_real)
-           {
-             if (**mangled == 'm')
-               {
-                 string_appendn (&tname, "-", 1);
-                 (*mangled)++;
-               }
-             while (isdigit (**mangled))       
-               {
-                 string_appendn (&tname, *mangled, 1);
-                 (*mangled)++;
-               }
-             if (**mangled == '.') /* fraction */
-               {
-                 string_appendn (&tname, ".", 1);
-                 (*mangled)++;
-                 while (isdigit (**mangled))   
-                   {
-                     string_appendn (&tname, *mangled, 1);
-                     (*mangled)++;
-                   }
-               }
-             if (**mangled == 'e') /* exponent */
-               {
-                 string_appendn (&tname, "e", 1);
-                 (*mangled)++;
-                 while (isdigit (**mangled))   
-                   {
-                     string_appendn (&tname, *mangled, 1);
-                     (*mangled)++;
-                   }
-               }
-           }
-         else if (is_pointer)
-           {
-             if (!get_count (mangled, &symbol_len))
-               {
-                 success = 0;
-                 break;
-               }
-             string_appendn (&tname, *mangled, symbol_len);
-             *mangled += symbol_len;
-           }
-       }
-      need_comma = 1;
-    }
-  string_append (&tname, ">::");
-  if (work -> destructor)
-    {
-      string_append (&tname, "~");
-    }
-  if (work -> constructor || work -> destructor)
-    {
-      string_append (&tname, trawname.b);
-    }
-  string_delete(&trawname);
-  
-  if (!success)
-    {
-      string_delete(&tname);
-    }
-  else
-    {
-      string_prepend (declp, tname.b);
-      string_delete (&tname);
-      
-      if (work -> static_type)
-       {
-         string_append (declp, *mangled + 1);
-         *mangled += strlen (*mangled);
-         success = 1;
-       }
-      else
-       {
-         success = demangle_args (work, mangled, declp);
-       }
-    }
-  return (success);
-}
-
-/*
-
-LOCAL FUNCTION
-
-       demangle_class -- demangle a mangled class sequence
-
-SYNOPSIS
-
-       static int
-       demangle_class (struct work_stuff *work, const char **mangled,
-                       strint *declp)
-
-DESCRIPTION
-
-       DECLP points to the buffer into which demangling is being done.
-
-       *MANGLED points to the current token to be demangled.  On input,
-       it points to a mangled class (I.E. "3foo", "13verylongclass", etc.)
-       On exit, it points to the next token after the mangled class on
-       success, or the first unconsumed token on failure.
-
-       If the CONSTRUCTOR or DESTRUCTOR flags are set in WORK, then
-       we are demangling a constructor or destructor.  In this case
-       we prepend "class::class" or "class::~class" to DECLP.
-
-       Otherwise, we prepend "class::" to the current DECLP.
-
-       Reset the constructor/destructor flags once they have been
-       "consumed".  This allows demangle_class to be called later during
-       the same demangling, to do normal class demangling.
-
-       Returns 1 if demangling is successful, 0 otherwise.
-
-*/
-
-static int
-demangle_class (work, mangled, declp)
-     struct work_stuff *work;
-     const char **mangled;
-     string *declp;
-{
-  int n;
-  int success = 0;
-
-  n = consume_count (mangled);
-  if (strlen (*mangled) >= n)
-    {
-      if (work -> constructor || work -> destructor)
-       {
-         string_prependn (declp, *mangled, n);
-         if (work -> destructor)
-           {
-             string_prepend (declp, "~");
-           }
-         work -> constructor = work -> destructor = 0;
-       }
-      string_prepend (declp, "::");
-      string_prependn (declp, *mangled, n);
-      *mangled += n;
-      success = 1;
-    }
-  return (success);
-}
-
-/*
-
-LOCAL FUNCTION
-
-       demangle_prefix -- consume the mangled name prefix and find signature
-
-SYNOPSIS
-
-       static int
-       demangle_prefix (struct work_stuff *work, const char **mangled,
-                        string *declp);
-
-DESCRIPTION
-
-       Consume and demangle the prefix of the mangled name.
-
-       DECLP points to the string buffer into which demangled output is
-       placed.  On entry, the buffer is empty.  On exit it contains
-       the root function name, the demangled operator name, or in some
-       special cases either nothing or the completely demangled result.
-
-       MANGLED points to the current pointer into the mangled name.  As each
-       token of the mangled name is consumed, it is updated.  Upon entry
-       the current mangled name pointer points to the first character of
-       the mangled name.  Upon exit, it should point to the first character
-       of the signature if demangling was successful, or to the first
-       unconsumed character if demangling of the prefix was unsuccessful.
-       
-       Returns 1 on success, 0 otherwise.
- */
-
-static int
-demangle_prefix (work, mangled, declp)
-     struct work_stuff *work;
-     const char **mangled;
-     string *declp;
-{
-  int success = 1;
-  const char *scan;
-  int i;
-
-  scan = strstr (*mangled, "__");
-
-  if (scan != NULL)
-    {
-      /* We found a sequence of two or more '_', ensure that we start at
-        the last pair in the sequence. */
-      i = strspn (scan, "_");
-      if (i > 2)
-       {
-         scan += (i - 2); 
-       }
-    }
-  if (scan == NULL)
-    {
-      success = 0;
-    }
-  else if (work -> static_type)
-    {
-      if (!isdigit (scan[0]) && (scan[0] != 't'))
-       {
-         success = 0;
-       }
-    }
-  else if ((scan == *mangled) && (isdigit (scan[2]) || (scan[2] == 'Q')))
-    {
-      /* A GNU style constructor starts with "__<digit>" or "__Q". */
-      work -> constructor = 1;
-      *mangled = scan + 2;
-    }
-  else if ((scan == *mangled) && !isdigit (scan[2]) && (scan[2] != 't'))
-    {
-      /* Mangled name starts with "__".  Skip over any leading '_' characters,
-        then find the next "__" that separates the prefix from the signature.
-        */
-      if (!(CFRONT_DEMANGLING || LUCID_DEMANGLING)
-         || (cfront_special (work, mangled, declp) == 0))
-       {
-         while (*scan == '_')
-           {
-             scan++;
-           }
-         if ((scan = strstr (scan, "__")) == NULL || (*(scan + 2) == '\0'))
-           {
-             /* No separator (I.E. "__not_mangled"), or empty signature
-                (I.E. "__not_mangled_either__") */
-             success = 0;
-           }
-         else
-           {
-             demangle_function_name (work, mangled, declp, scan);
-           }
-       }
-    }
-  else if (*(scan + 2) != '\0')
-    {
-      /* Mangled name does not start with "__" but does have one somewhere
-        in there with non empty stuff after it.  Looks like a global
-        function name. */
-      demangle_function_name (work, mangled, declp, scan);
-    }
-  else
-    {
-      /* Doesn't look like a mangled name */
-      success = 0;
-    }
-  return (success);
-}
-
-/*
-
-LOCAL FUNCTION
-
-       gnu_special -- special handling of gnu mangled strings
-
-SYNOPSIS
-
-       static int
-       gnu_special (struct work_stuff *work, const char **mangled,
-                    string *declp);
-
-
-DESCRIPTION
-
-       Process some special GNU style mangling forms that don't fit
-       the normal pattern.  For example:
-
-               _$_3foo         (destructor for class foo)
-               _vt$foo         (foo virtual table)
-               _vt$foo$bar     (foo::bar virtual table)
-               _3foo$varname   (static data member)
- */
-
-static int
-gnu_special (work, mangled, declp)
-     struct work_stuff *work;
-     const char **mangled;
-     string *declp;
-{
-  int n;
-  int success = 1;
-  const char *p;
-
-  if ((*mangled)[0] == '_'
-      && strchr (cplus_markers, (*mangled)[1]) != NULL
-      && (*mangled)[2] == '_')
-    {
-      /* Found a GNU style destructor, get past "_<CPLUS_MARKER>_" */
-      (*mangled) += 3;
-      work -> destructor = 1;
-    }
-  else if ((*mangled)[0] == '_'
-          && (*mangled)[1] == 'v'
-          && (*mangled)[2] == 't'
-          && strchr (cplus_markers, (*mangled)[3]) != NULL)
-    {
-      /* Found a GNU style virtual table, get past "_vt<CPLUS_MARKER>"
-         and create the decl.  Note that we consume the entire mangled
-        input string, which means that demangle_signature has no work
-        to do. */
-      (*mangled) += 4;
-      while (**mangled != '\0')
-       {
-         n = strcspn (*mangled, cplus_markers);
-         string_appendn (declp, *mangled, n);
-         (*mangled) += n;
-         if (**mangled != '\0')
-           {
-             string_append (declp, "::");
-             (*mangled)++;
-           }
-       }
-      string_append (declp, " virtual table");
-    }
-  else if ((*mangled)[0] == '_'
-          && isdigit ((*mangled)[1])
-          && (p = strpbrk (*mangled, cplus_markers)) != NULL)
-    {
-      /* static data member, "_3foo$varname" for example */
-      (*mangled)++;
-      p++;
-      n = consume_count (mangled);
-      string_appendn (declp, *mangled, n);
-      string_append (declp, "::");
-      n = strlen (p);
-      string_appendn (declp, p, n);
-      (*mangled) = p + n;
-    }
-  else
-    {
-      success = 0;
-    }
-  return (success);
-}
-
-/*
-
-LOCAL FUNCTION
-
-       cfront_special -- special handling of cfront/lucid mangled strings
-
-SYNOPSIS
-
-       static int
-       cfront_special (struct work_stuff *work, const char **mangled,
-                       string *declp);
-
-
-DESCRIPTION
-
-       Process some special cfront style mangling forms that don't fit
-       the normal pattern.  For example:
-
-               __vtbl__3foo            (foo virtual table)
-               __vtbl__3foo__3bar      (bar::foo virtual table)
-
- */
-
-static int
-cfront_special (work, mangled, declp)
-     struct work_stuff *work;
-     const char **mangled;
-     string *declp;
-{
-  int n;
-  int i;
-  int success = 1;
-  const char *p;
-
-  if (strncmp (*mangled, ARM_VTABLE_STRING, ARM_VTABLE_STRLEN) == 0)
-    {
-      /* Found a cfront style virtual table, get past ARM_VTABLE_STRING
-         and create the decl.  Note that we consume the entire mangled
-        input string, which means that demangle_signature has no work
-        to do. */
-      (*mangled) += ARM_VTABLE_STRLEN;
-      while (**mangled != '\0')
-       {
-         n = consume_count (mangled);
-         string_prependn (declp, *mangled, n);
-         (*mangled) += n;
-         if ((*mangled)[0] == '_' && (*mangled)[1] == '_')
-           {
-             string_prepend (declp, "::");
-             (*mangled) += 2;
-           }
-       }
-      string_append (declp, " virtual table");
-    }
-  else
-    {
-      success = 0;
-    }
-  return (success);
-}
-
-/*
-
-LOCAL FUNCTION
-
-       demangle_qualified -- demangle 'Q' qualified name strings
-
-SYNOPSIS
-
-       static int
-       demangle_qualified (struct work_stuff *, const char *mangled,
-                           string *result, int isfuncname);
-
-DESCRIPTION
-
-       Demangle a qualified name, such as "Q25Outer5Inner" which is
-       the mangled form of "Outer::Inner".  The demangled output is
-       appended to the result string.
-
-       If isfuncname is nonzero, then the qualified name we are building
-       is going to be used as a member function name, so if it is a
-       constructor or destructor function, append an appropriate
-       constructor or destructor name.  I.E. for the above example,
-       the result for use as a constructor is "Outer::Inner::Inner"
-       and the result for use as a destructor is "Outer::Inner::~Inner".
-
-BUGS
-
-       Numeric conversion is ASCII dependent (FIXME).
-
- */
-
-static int
-demangle_qualified (work, mangled, result, isfuncname)
-     struct work_stuff *work;
-     const char **mangled;
-     string *result;
-     int isfuncname;
-{
-  int qualifiers;
-  int namelength;
-  int success = 0;
-
-  qualifiers = (*mangled)[1] - '0';
-  if (qualifiers > 0 && qualifiers < 10)
-    {
-      /* Assume success until we discover otherwise.  Skip over the 'Q', the
-        qualifier count, and any '_' between the qualifier count and the
-        first name (cfront qualified names). */
-
-      success = 1;
-      if ((*mangled)[2] == '_')
-       {
-         (*mangled)++;
-       }
-      (*mangled) += 2;
-
-
-      /* Pick off the names and append them to the result string as they
-        are found, separated by '::'. */
-
-      while (qualifiers-- > 0)
-       {
-         namelength = consume_count (mangled);
-         if (strlen (*mangled) < namelength)
-           {
-             /* Simple sanity check failed */
-             success = 0;
-             break;
-           }
-         string_appendn (result, *mangled, namelength);
-         if (qualifiers > 0)
-           {
-             string_appendn (result, "::", 2);
-           }
-         *mangled += namelength;
-       }
-
-      /* If we are using the result as a function name, we need to append
-        the appropriate '::' separated constructor or destructor name.
-        We do this here because this is the most convenient place, where
-        we already have a pointer to the name and the length of the name. */
-
-      if (isfuncname && (work -> constructor || work -> destructor))
-       {
-         string_appendn (result, "::", 2);
-         if (work -> destructor)
-           {
-             string_append (result, "~");
-           }
-         string_appendn (result, (*mangled) - namelength, namelength);
-       }
-    }
-  return (success);
-}
-
-/*
-
-LOCAL FUNCTION
-
-       get_count -- convert an ascii count to integer, consuming tokens
-
-SYNOPSIS
-
-       static int
-       get_count (const char **type, int *count)
-
-DESCRIPTION
-
-       Return 0 if no conversion is performed, 1 if a string is converted.
-*/
-
-static int
-get_count (type, count)
-     const char **type;
-     int *count;
-{
-  const char *p;
-  int n;
-
-  if (!isdigit (**type))
-    {
-      return (0);
-    }
-  else
-    {
-      *count = **type - '0';
-      (*type)++;
-      if (isdigit (**type))
-       {
-         p = *type;
-         n = *count;
-         do 
-           {
-             n *= 10;
-             n += *p - '0';
-             p++;
-           } 
-         while (isdigit (*p));
-         if (*p == '_')
-           {
-             *type = p + 1;
-             *count = n;
-           }
-       }
-    }
-  return (1);
-}
-
-/* result will be initialised here; it will be freed on failure */
-
-static int
-do_type (work, mangled, result)
-     struct work_stuff *work;
-     const char **mangled;
-     string *result;
-{
-  int n;
-  int done;
-  int success;
-  string decl;
-  const char *remembered_type;
-  int constp;
-  int volatilep;
-
-  string_init (&decl);
-  string_init (result);
-
-  done = 0;
-  success = 1;
-  while (success && !done)
-    {
-      int member;
-      switch (**mangled)
-       {
-
-       /* A pointer type */
-       case 'P':
-         (*mangled)++;
-         string_prepend (&decl, "*");
-         break;
-
-       /* A reference type */
-       case 'R':
-         (*mangled)++;
-         string_prepend (&decl, "&");
-         break;
-
-       /* A back reference to a previously seen type */
-       case 'T':
-         (*mangled)++;
-         if (!get_count (mangled, &n) || n >= work -> ntypes)
-           {
-             success = 0;
-           }
-         else
-           {
-             remembered_type = work -> typevec[n];
-             mangled = &remembered_type;
-           }
-         break;
-
-       /* A function */
-       case 'F':
-         (*mangled)++;
-         if (!STRING_EMPTY (&decl) && decl.b[0] == '*')
-           {
-             string_prepend (&decl, "(");
-             string_append (&decl, ")");
-           }
-         /* After picking off the function args, we expect to either find the
-            function return type (preceded by an '_') or the end of the
-            string. */
-         if (!demangle_args (work, mangled, &decl)
-             || (**mangled != '_' && **mangled != '\0'))
-           {
-             success = 0;
-           }
-         if (success && (**mangled == '_'))
-           {
-             (*mangled)++;
-           }
-         break;
-
-       case 'M':
-       case 'O':
-         {
-           constp = 0;
-           volatilep = 0;
-
-           member = **mangled == 'M';
-           (*mangled)++;
-           if (!isdigit (**mangled))
-             {
-               success = 0;
-               break;
-             }
-           n = consume_count (mangled);
-           if (strlen (*mangled) < n)
-             {
-               success = 0;
-               break;
-             }
-           string_append (&decl, ")");
-           string_prepend (&decl, "::");
-           string_prependn (&decl, *mangled, n);
-           string_prepend (&decl, "(");
-           *mangled += n;
-           if (member)
-             {
-               if (**mangled == 'C')
-                 {
-                   (*mangled)++;
-                   constp = 1;
-                 }
-               if (**mangled == 'V')
-                 {
-                   (*mangled)++;
-                   volatilep = 1;
-                 }
-               if (*(*mangled)++ != 'F')
-                 {
-                   success = 0;
-                   break;
-                 }
-             }
-           if ((member && !demangle_args (work, mangled, &decl))
-               || **mangled != '_')
-             {
-               success = 0;
-               break;
-             }
-           (*mangled)++;
-           if (! PRINT_ANSI_QUALIFIERS)
-             {
-               break;
-             }
-           if (constp)
-             {
-               APPEND_BLANK (&decl);
-               string_append (&decl, "const");
-             }
-           if (volatilep)
-             {
-               APPEND_BLANK (&decl);
-               string_append (&decl, "volatile");
-             }
-           break;
-         }
-
-       case 'C':
-         if ((*mangled)[1] == 'P')
-           {
-             (*mangled)++;
-             if (PRINT_ANSI_QUALIFIERS)
-               {
-                 if (!STRING_EMPTY (&decl))
-                   {
-                     string_prepend (&decl, " ");
-                   }
-                 string_prepend (&decl, "const");
-               }
-             break;
-           }
-
-         /* fall through */
-       default:
-         done = 1;
-         break;
-       }
-    }
-
-  switch (**mangled)
-    {
-      /* A qualified name, such as "Outer::Inner". */
-      case 'Q':
-        success = demangle_qualified (work, mangled, result, 0);
-       break;
-
-      default:
-       success = demangle_fund_type (work, mangled, result);
-       break;
-    }
-
-  if (success)
-    {
-      if (!STRING_EMPTY (&decl))
-       {
-         string_append (result, " ");
-         string_appends (result, &decl);
-       }
-    }
-  else
-    {
-      string_delete (result);
-    }
-  string_delete (&decl);
-  return (success);
-}
-
-/* Given a pointer to a type string that represents a fundamental type
-   argument (int, long, unsigned int, etc) in TYPE, a pointer to the
-   string in which the demangled output is being built in RESULT, and
-   the WORK structure, decode the types and add them to the result.
-
-   For example:
-
-       "Ci"    =>      "const int"
-       "Sl"    =>      "signed long"
-       "CUs"   =>      "const unsigned short"
-
-   */
-
-static int
-demangle_fund_type (work, mangled, result)
-     struct work_stuff *work;
-     const char **mangled;
-     string *result;
-{
-  int done = 0;
-  int success = 1;
-  int n;
-
-  /* First pick off any type qualifiers.  There can be more than one. */
-
-  while (!done)
-    {
-      switch (**mangled)
-       {
-         case 'C':
-           (*mangled)++;
-           if (PRINT_ANSI_QUALIFIERS)
-             {
-               APPEND_BLANK (result);
-               string_append (result, "const");
-             }
-           break;
-         case 'U':
-           (*mangled)++;
-           APPEND_BLANK (result);
-           string_append (result, "unsigned");
-           break;
-         case 'S': /* signed char only */
-           (*mangled)++;
-           APPEND_BLANK (result);
-           string_append (result, "signed");
-           break;
-         case 'V':
-           (*mangled)++;
-           if (PRINT_ANSI_QUALIFIERS)
-             {
-               APPEND_BLANK (result);
-               string_append (result, "volatile");
-             }
-           break;
-         default:
-           done = 1;
-           break;
-       }
-    }
-
-  /* Now pick off the fundamental type.  There can be only one. */
-
-  switch (**mangled)
-    {
-      case '\0':
-      case '_':
-       break;
-      case 'v':
-       (*mangled)++;
-       APPEND_BLANK (result);
-       string_append (result, "void");
-       break;
-      case 'x':
-       (*mangled)++;
-       APPEND_BLANK (result);
-       string_append (result, "long long");
-       break;
-      case 'l':
-       (*mangled)++;
-       APPEND_BLANK (result);
-       string_append (result, "long");
-       break;
-      case 'i':
-       (*mangled)++;
-       APPEND_BLANK (result);
-       string_append (result, "int");
-       break;
-      case 's':
-       (*mangled)++;
-       APPEND_BLANK (result);
-       string_append (result, "short");
-       break;
-      case 'c':
-       (*mangled)++;
-       APPEND_BLANK (result);
-       string_append (result, "char");
-       break;
-      case 'r':
-       (*mangled)++;
-       APPEND_BLANK (result);
-       string_append (result, "long double");
-       break;
-      case 'd':
-       (*mangled)++;
-       APPEND_BLANK (result);
-       string_append (result, "double");
-       break;
-      case 'f':
-       (*mangled)++;
-       APPEND_BLANK (result);
-       string_append (result, "float");
-       break;
-      case 'G':
-       (*mangled)++;
-       if (!isdigit (**mangled))
-         {
-           success = 0;
-           break;
-         }
-       /* fall through */
-      /* An explicit type, such as "6mytype" or "7integer" */
-      case '0':
-      case '1':
-      case '2':
-      case '3':
-      case '4':
-      case '5':
-      case '6':
-      case '7':
-      case '8':
-      case '9':
-       n = consume_count (mangled);
-       if (strlen (*mangled) < n)
-         {
-           success = 0;
-           break;
-         }
-       APPEND_BLANK (result);
-       string_appendn (result, *mangled, n);
-       *mangled += n;
-       break;
-      default:
-       success = 0;
-       break;
-      }
-
-  return (success);
-}
-
-/* `result' will be initialized in do_type; it will be freed on failure */
-
-static int
-do_arg (work, mangled, result)
-     struct work_stuff *work;
-     const char **mangled;
-     string *result;
-{
-  const char *start = *mangled;
-
-  if (!do_type (work, mangled, result))
-    {
-      return (0);
-    }
-  else
-    {
-      remember_type (work, start, *mangled - start);
-      return (1);
-    }
-}
-
-static void
-remember_type (work, start, len)
-     struct work_stuff *work;
-     const char *start;
-     int len;
-{
-  char *tem;
-
-  if (work -> ntypes >= work -> typevec_size)
-    {
-      if (work -> typevec_size == 0)
-       {
-         work -> typevec_size = 3;
-         work -> typevec =
-           (char **) xmalloc (sizeof (char *) * work -> typevec_size);
-       }
-      else
-       {
-         work -> typevec_size *= 2;
-         work -> typevec =
-           (char **) xrealloc ((char *)work -> typevec,
-                               sizeof (char *) * work -> typevec_size);
-       }
-    }
-  tem = (char *) xmalloc (len + 1);
-  memcpy (tem, start, len);
-  tem[len] = '\0';
-  work -> typevec[work -> ntypes++] = tem;
-}
-
-/* Forget the remembered types, but not the type vector itself. */
-
-static void
-forget_types (work)
-     struct work_stuff *work;
-{
-  int i;
-
-  while (work -> ntypes > 0)
-    {
-      i = --(work -> ntypes);
-      if (work -> typevec[i] != NULL)
-       {
-         free (work -> typevec[i]);
-         work -> typevec[i] = NULL;
-       }
-    }
-}
-
-/* Process the argument list part of the signature, after any class spec
-   has been consumed, as well as the first 'F' character (if any).  For
-   example:
-
-   "__als__3fooRT0"            =>      process "RT0"
-   "complexfunc5__FPFPc_PFl_i" =>      process "PFPc_PFl_i"
-
-   DECLP must be already initialised, usually non-empty.  It won't be freed
-   on failure.
-
-   Note that g++ differs significantly from cfront and lucid style mangling
-   with regards to references to previously seen types.  For example, given
-   the source fragment:
-
-     class foo {
-       public:
-       foo::foo (int, foo &ia, int, foo &ib, int, foo &ic);
-     };
-
-     foo::foo (int, foo &ia, int, foo &ib, int, foo &ic) { ia = ib = ic; }
-     void foo (int, foo &ia, int, foo &ib, int, foo &ic) { ia = ib = ic; }
-
-   g++ produces the names:
-
-     __3fooiRT0iT2iT2
-     foo__FiR3fooiT1iT1
-
-   while lcc (and presumably cfront as well) produces:
-
-     foo__FiR3fooT1T2T1T2
-     __ct__3fooFiR3fooT1T2T1T2
-
-   Note that g++ bases it's type numbers starting at zero and counts all
-   previously seen types, while lucid/cfront bases it's type numbers starting
-   at one and only considers types after it has seen the 'F' character
-   indicating the start of the function args.  For lucid/cfront style, we
-   account for this difference by discarding any previously seen types when
-   we see the 'F' character, and subtracting one from the type number
-   reference.
-
- */
-
-static int
-demangle_args (work, mangled, declp)
-     struct work_stuff *work;
-     const char **mangled;
-     string *declp;
-{
-  string arg;
-  int need_comma = 0;
-  int r;
-  int t;
-  const char *tem;
-  char temptype;
-
-  if (PRINT_ARG_TYPES)
-    {
-      string_append (declp, "(");
-      if (**mangled == '\0')
-       {
-         string_append (declp, "void");
-       }
-    }
-
-  while (**mangled != '_' && **mangled != '\0' && **mangled != 'e')
-    {
-      if ((**mangled == 'N') || (**mangled == 'T'))
-       {
-         temptype = *(*mangled)++;
-         
-         if (temptype == 'N')
-           {
-             if (!get_count (mangled, &r))
-               {
-                 return (0);
-               }
-           }
-         else
-           {
-             r = 1;
-           }
-         if (!get_count (mangled, &t))
-           {
-             return (0);
-           }
-         if (LUCID_DEMANGLING || CFRONT_DEMANGLING)
-           {
-             t--;
-           }
-         /* Validate the type index.  Protect against illegal indices from
-            malformed type strings. */
-         if ((t < 0) || (t >= work -> ntypes))
-           {
-             return (0);
-           }
-         while (--r >= 0)
-           {
-             tem = work -> typevec[t];
-             if (need_comma && PRINT_ARG_TYPES)
-               {
-                 string_append (declp, ", ");
-               }
-             if (!do_arg (work, &tem, &arg))
-               {
-                 return (0);
-               }
-             if (PRINT_ARG_TYPES)
-               {
-                 string_appends (declp, &arg);
-               }
-             string_delete (&arg);
-             need_comma = 1;
-           }
-       }
-      else
-       {
-         if (need_comma & PRINT_ARG_TYPES)
-           {
-             string_append (declp, ", ");
-           }
-         if (!do_arg (work, mangled, &arg))
-           {
-             return (0);
-           }
-         if (PRINT_ARG_TYPES)
-           {
-             string_appends (declp, &arg);
-           }
-         string_delete (&arg);
-         need_comma = 1;
-       }
-    }
-
-  if (**mangled == 'e')
-    {
-      (*mangled)++;
-      if (PRINT_ARG_TYPES)
-       {
-         if (need_comma)
-           {
-             string_append (declp, ",");
-           }
-         string_append (declp, "...");
-       }
-    }
-
-  if (PRINT_ARG_TYPES)
-    {
-      string_append (declp, ")");
-    }
-  return (1);
-}
-
-static void
-demangle_function_name (work, mangled, declp, scan)
-     struct work_stuff *work;
-     const char **mangled;
-     string *declp;
-     const char *scan;
-{
-  int i;
-  int len;
-  string type;
-  const char *tem;
-
-  string_appendn (declp, (*mangled), scan - (*mangled));
-  string_need (declp, 1);
-  *(declp -> p) = '\0';
-
-  /* Consume the function name, including the "__" separating the name
-     from the signature.  We are guaranteed that SCAN points to the
-     separator. */
-
-  (*mangled) = scan + 2;
-
-  if (LUCID_DEMANGLING || CFRONT_DEMANGLING)
-    {
-
-      /* See if we have an ARM style constructor or destructor operator.
-        If so, then just record it, clear the decl, and return.
-        We can't build the actual constructor/destructor decl until later,
-        when we recover the class name from the signature. */
-
-      if (strcmp (declp -> b, "__ct") == 0)
-       {
-         work -> constructor = 1;
-         string_clear (declp);
-         return;
-       }
-      else if (strcmp (declp -> b, "__dt") == 0)
-       {
-         work -> destructor = 1;
-         string_clear (declp);
-         return;
-       }
-    }
-
-  if (declp->p - declp->b >= 3 
-      && declp->b[0] == 'o'
-      && declp->b[1] == 'p'
-      && strchr (cplus_markers, declp->b[2]) != NULL)
-    {
-      /* see if it's an assignment expression */
-      if (declp->p - declp->b >= 10 /* op$assign_ */
-         && memcmp (declp->b + 3, "assign_", 7) == 0)
-       {
-         for (i = 0; i < sizeof (optable) / sizeof (optable[0]); i++)
-           {
-             len = declp->p - declp->b - 10;
-             if (strlen (optable[i].in) == len
-                 && memcmp (optable[i].in, declp->b + 10, len) == 0)
-               {
-                 string_clear (declp);
-                 string_append (declp, "operator");
-                 string_append (declp, optable[i].out);
-                 string_append (declp, "=");
-                 break;
-               }
-           }
-       }
-      else
-       {
-         for (i = 0; i < sizeof (optable) / sizeof (optable[0]); i++)
-           {
-             int len = declp->p - declp->b - 3;
-             if (strlen (optable[i].in) == len 
-                 && memcmp (optable[i].in, declp->b + 3, len) == 0)
-               {
-                 string_clear (declp);
-                 string_append (declp, "operator");
-                 string_append (declp, optable[i].out);
-                 break;
-               }
-           }
-       }
-    }
-  else if (declp->p - declp->b >= 5 && memcmp (declp->b, "type$", 5) == 0)
-    {
-      /* type conversion operator */
-      tem = declp->b + 5;
-      if (do_type (work, &tem, &type))
-       {
-         string_clear (declp);
-         string_append (declp, "operator ");
-         string_appends (declp, &type);
-         string_delete (&type);
-       }
-    }
-  else if (declp->b[2] == 'o' && declp->b[3] == 'p')
-    {
-      /* ANSI.  */
-      /* type conversion operator.  */
-      tem = declp->b + 4;
-      if (do_type (work, &tem, &type))
-       {
-         string_clear (declp);
-         string_append (declp, "operator ");
-         string_appends (declp, &type);
-         string_delete (&type);
-       }
-    }
-  else if (declp->b[0] == '_' && declp->b[1] == '_'
-          && declp->b[2] >= 'a' && declp->b[2] <= 'z'
-          && declp->b[3] >= 'a' && declp->b[3] <= 'z')
-    {
-      if (declp->b[4] == '\0')
-       {
-         /* Operator.  */
-         for (i = 0; i < sizeof (optable) / sizeof (optable[0]); i++)
-           {
-             if (strlen (optable[i].in) == 2
-                 && memcmp (optable[i].in, declp->b + 2, 2) == 0)
-               {
-                 string_clear (declp);
-                 string_append (declp, "operator");
-                 string_append (declp, optable[i].out);
-                 break;
-               }
-           }
-       }
-      else
-       {
-         if (declp->b[2] == 'a' && declp->b[5] == '\0')
-           {
-             /* Assignment. */
-             for (i = 0; i < sizeof (optable) / sizeof (optable[0]); i++)
-               {
-                 if (strlen (optable[i].in) == 3
-                     && memcmp (optable[i].in, declp->b + 2, 3) == 0)
-                   {
-                     string_clear (declp);
-                     string_append (declp, "operator");
-                     string_append (declp, optable[i].out);
-                     break;
-                   }                 
-               }
-           }
-       }
-    }
-}
-
-/* a mini string-handling package */
-
-static void
-string_need (s, n)
-     string *s;
-     int n;
-{
-  int tem;
-
-  if (s->b == NULL)
-    {
-      if (n < 32)
-       {
-         n = 32;
-       }
-      s->p = s->b = (char *) xmalloc (n);
-      s->e = s->b + n;
-    }
-  else if (s->e - s->p < n)
-    {
-      tem = s->p - s->b;
-      n += tem;
-      n *= 2;
-      s->b = (char *) xrealloc (s->b, n);
-      s->p = s->b + tem;
-      s->e = s->b + n;
-    }
-}
-
-static void
-string_delete (s)
-     string *s;
-{
-  if (s->b != NULL)
-    {
-      free (s->b);
-      s->b = s->e = s->p = NULL;
-    }
-}
-
-static void
-string_init (s)
-     string *s;
-{
-  s->b = s->p = s->e = NULL;
-}
-
-static void 
-string_clear (s)
-     string *s;
-{
-  s->p = s->b;
-}
-
-#if 0
-
-static int
-string_empty (s)
-     string *s;
-{
-  return (s->b == s->p);
-}
-
-#endif
-
-static void
-string_append (p, s)
-     string *p;
-     const char *s;
-{
-  int n;
-  if (s == NULL || *s == '\0')
-    return;
-  n = strlen (s);
-  string_need (p, n);
-  memcpy (p->p, s, n);
-  p->p += n;
-}
-
-static void
-string_appends (p, s)
-     string *p, *s;
-{
-  int n;
-
-  if (s->b != s->p)
-    {
-      n = s->p - s->b;
-      string_need (p, n);
-      memcpy (p->p, s->b, n);
-      p->p += n;
-    }
-}
-
-static void
-string_appendn (p, s, n)
-     string *p;
-     const char *s;
-     int n;
-{
-  if (n != 0)
-    {
-      string_need (p, n);
-      memcpy (p->p, s, n);
-      p->p += n;
-    }
-}
-
-static void
-string_prepend (p, s)
-     string *p;
-     const char *s;
-{
-  if (s != NULL && *s != '\0')
-    {
-      string_prependn (p, s, strlen (s));
-    }
-}
-
-#if 0
-
-static void
-string_prepends (p, s)
-     string *p, *s;
-{
-  if (s->b != s->p)
-    {
-      string_prependn (p, s->b, s->p - s->b);
-    }
-}
-
-#endif
-
-static void
-string_prependn (p, s, n)
-     string *p;
-     const char *s;
-     int n;
-{
-  char *q;
-
-  if (n != 0)
-    {
-      string_need (p, n);
-      for (q = p->p - 1; q >= p->b; q--)
-       {
-         q[n] = q[0];
-       }
-      memcpy (p->b, s, n);
-      p->p += n;
-    }
-}
-
-/* To generate a standalone demangler program for testing purposes, just
-   compile and link this file with -DMAIN.   When run, it demangles each
-   command line arg, or each stdin string, and prints the result on stdout. */
-
-#ifdef MAIN
-
-static void
-demangle_it (mangled_name)
-  char *mangled_name;
-{
-  char *result;
-
-  result = cplus_demangle (mangled_name, DMGL_PARAMS | DMGL_ANSI);
-  if (result == NULL)
-    {
-      printf ("%s\n", mangled_name);
-    }
-  else
-    {
-      printf ("%s\n", result);
-      free (result);
-    }
-}
-
-PTR
-xmalloc (size)
-    long size;
-{
-  PTR newmem;
-
-  if ((newmem = malloc ((int) size)) == NULL)
-    {
-      fprintf (stderr, "\nCan't allocate %u bytes\n", size);
-      exit (1);
-    }
-  return (newmem);
-}
-
-PTR
-xrealloc (oldmem, size)
-    PTR oldmem;
-    long size;
-{
-  PTR newmem;
-
-  if ((newmem = realloc ((char *) oldmem, (int) size)) == NULL)
-    {
-      fprintf (stderr, "\nCan't reallocate %u bytes\n", size);
-      exit (1);
-    }
-  return (newmem);
-}
-
-#include <stdio.h>
-
-enum demangling_styles current_demangling_style = gnu_demangling;
-
-main (argc, argv)
-  int argc;
-  char **argv;
-{
-  char mangled_name[128];
-  char *result;
-  int c;
-  extern char *optarg;
-  extern int optind;
-
-  while ((c = getopt (argc, argv, "s:?")) != EOF)
-    {
-      switch (c)
-       {
-         case '?':
-           fprintf (stderr, "usage: demangle [-s style] [arg1 [arg2]] ...\n");
-           fprintf (stderr, "style = { gnu, lucid, cfront }\n");
-           fprintf (stderr, "reads args from stdin if none supplied\n");
-           exit (0);
-           break;
-         case 's':
-           if (strcmp (optarg, "gnu") == 0)
-             {
-               current_demangling_style = gnu_demangling;
-             }
-           else if (strcmp (optarg, "lucid") == 0)
-             {
-               current_demangling_style = lucid_demangling;
-             }
-           else if (strcmp (optarg, "cfront") == 0)
-             {
-               current_demangling_style = cfront_demangling;
-             }
-           else
-             {
-               fprintf (stderr, "unknown demangling style `%s'\n", optarg);
-               exit (1);
-             }
-           break;
-       }
-    }
-  if (optind < argc)
-    {
-      for ( ; optind < argc; optind++)
-       {
-         demangle_it (argv[optind]);
-       }
-    }
-  else
-    {
-      while (gets (mangled_name))
-       {
-         demangle_it (mangled_name);
-       }
-    }
-}
-
-#endif /* main */
index cc3fc60..e69de29 100644 (file)
@@ -1,54 +0,0 @@
-/* Defs for interface to demanglers.
-   Copyright 1992 Free Software Foundation, Inc.
-   
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
-   any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software
-   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-
-#define DMGL_PARAMS    (1 << 0)        /* Include function args */
-#define DMGL_ANSI      (1 << 1)        /* Include const, volatile, etc */
-
-/* Enumeration of possible demangling styles.
-
-   Lucid and cfront styles are still kept logically distinct, even though
-   they now both behave identically.  The resulting style is actual the
-   union of both.  I.E. either style recognizes both "__pt__" and "__rf__"
-   for operator "->", even though the first is lucid style and the second
-   is cfront/ARM style. (FIXME?) */
-
-extern enum demangling_styles
-{
-  unknown_demangling = 0,
-  auto_demangling,
-  gnu_demangling,
-  lucid_demangling,
-  cfront_demangling
-} current_demangling_style;
-
-/* Define string names for the various demangling styles. */
-
-#define AUTO_DEMANGLING_STYLE_STRING   "auto"
-#define GNU_DEMANGLING_STYLE_STRING    "gnu"
-#define LUCID_DEMANGLING_STYLE_STRING  "lucid"
-#define CFRONT_DEMANGLING_STYLE_STRING "cfront"
-
-/* Some macros to test what demangling style is active. */
-
-#define AUTO_DEMANGLING (current_demangling_style == auto_demangling)
-#define GNU_DEMANGLING (current_demangling_style == gnu_demangling)
-#define LUCID_DEMANGLING (current_demangling_style == lucid_demangling)
-#define CFRONT_DEMANGLING (current_demangling_style == cfront_demangling)
-
-extern void
-set_demangling_style PARAMS ((char *));
index db880a6..e69de29 100755 (executable)
@@ -1,111 +0,0 @@
-##Copyright (C) 1991 Free Software Foundation, Inc.
-
-# Makefile for GDB documentation.
-# This file is part of GDB.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-# 
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-# 
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-# main GDB source directory
-srcdir = ..
-
-# Documentation (gdb.dvi) needs either GNU m4 or SysV m4; 
-# Berkeley/Sun don't have quite enough. 
-#M4=/usr/5bin/m4
-M4=gm4
-
-# where to find texinfo; GDB dist should include a recent one
-TEXIDIR=${srcdir}/../texinfo/fsf
-
-# where to find makeinfo, preferably one designed for texinfo-2
-MAKEINFO=makeinfo
-
-# Where is the source dir for the READLINE library?  Traditionally in .. or .
-# (For the binary library built from it, we use ${READLINE_DIR}${subdir}.)
-READLINE_DIR = ${srcdir}/../readline
-
-# Main GDB manual's source files
-SFILES_DOCDIR = \
-       gdb.texinfo pretex.m4 none.m4 all.m4 gdbinv-m.m4 gdbinv-s.m4 gdbVN.m4
-
-all: gdb.info gdb.dvi refcard.dvi gdb-internals gdbint.dvi
-
-clean:
-       rm -f gdb.dvi rdl-apps.texi gdb-all* gdb.info* gdbVN.m4
-       rm -f gdb-internals gdbint.?? gdbint.???
-       rm -f refcard.ps refcard.dvi rcfonts.tex refcard.log *~
-
-# GDB QUICK REFERENCE (TeX dvi file, CM fonts)
-refcard.dvi : refcard.tex
-       rm -f rcfonts.tex; cp rc-cm.tex rcfonts.tex
-       TEXINPUTS=.:$$TEXINPUTS tex refcard.tex; rm -f refcard.log 
-       rm -f rcfonts.tex
-
-# GDB QUICK REFERENCE (PostScript output, common PS fonts)
-refcard.ps : refcard.tex
-       rm -f rcfonts.tex; cp rc-ps.tex rcfonts.tex
-       TEXINPUTS=.:$$TEXINPUTS tex refcard.tex
-       dvips -t landscape refcard -o; rm -f refcard.dvi refcard.log
-       rm -f rcfonts.tex
-
-# Cover file for "Readline" appendices
-rdl-apps.texi: ${READLINE_DIR}/inc-readline.texinfo \
-                       ${READLINE_DIR}/inc-history.texinfo
-       rm -f rdl-apps.texi
-       echo "@include ${READLINE_DIR}/inc-readline.texinfo" >rdl-apps.texi
-       echo "@include ${READLINE_DIR}/inc-history.texinfo" >>rdl-apps.texi
-
-# File to record current GDB version number (copied from main dir Makefile.in)
-gdbVN.m4 : ${srcdir}/Makefile.in
-       ( VER=`sed <${srcdir}/Makefile.in -n 's/VERSION = //p'` ;\
-       echo "_define__(<_GDB_VN__>,$$VER)" > gdbVN.m4 )
-
-# GDB MANUAL: texinfo source, created by preprocessing w/m4
-# Be sure to not create a bad gdb-all.texi if ${M4} is missing or aborts...
-gdb-all.texi: ${SFILES_DOCDIR}
-       rm -f foobus.texinfo
-       ${M4} pretex.m4 none.m4 all.m4 gdb.texinfo  >foobus.texinfo
-       rm -f gdb-all.texi
-       mv foobus.texinfo gdb-all.texi
-
-# GDB MANUAL: TeX dvi file
-gdb.dvi : gdb-all.texi rdl-apps.texi
-       TEXINPUTS=${TEXIDIR}:.:$$TEXINPUTS tex gdb-all.texi
-       texindex gdb-all.??
-       TEXINPUTS=${TEXIDIR}:.:$$TEXINPUTS tex gdb-all.texi
-       mv gdb-all.dvi gdb.dvi
-       rm -f gdb-all.?? gdb-all.???
-
-# GDB MANUAL: info file
-# We're using texinfo2, and older makeinfo's may not be able to
-# cope with all the markup.  In the meantime, we distribute the info
-# files 
-gdb.info: gdb-all.texi
-       ${MAKEINFO} gdb-all.texi
-
-# GDB INTERNALS MANUAL: TeX dvi file
-gdbint.dvi : gdbint.texinfo
-       TEXINPUTS=${TEXIDIR}:.:$$TEXINPUTS tex gdbint.texinfo
-       texindex gdbint.??
-       TEXINPUTS=${TEXIDIR}:.:$$TEXINPUTS tex gdbint.texinfo
-       rm -f gdbint.?? gdbint.aux gdbint.cps gdbint.fns gdbint.kys \
-               gdbint.log gdbint.pgs gdbint.toc gdbint.tps gdbint.vrs
-
-# GDB INTERNALS MANUAL: info file
-gdb-internals : gdbint.texinfo
-       ${MAKEINFO} gdbint.texinfo
-
-
-
-
index e2162da..e69de29 100755 (executable)
-
-\input texinfo      @c -*-texinfo-*-
-@c Copyright (c) 1988 1989 1990 1991 1992 Free Software Foundation, Inc.
-@c %**start of header 
-@setfilename gdb.info
-@settitle Using GDB (v4)
-@setchapternewpage odd
-@c @smallbook
-@c @cropmarks
-@c %**end of header
-
-@finalout
-@syncodeindex ky cp
-
-@c ===> NOTE! <==
-@c Determine the edition number in *three* places by hand:
-@c      1. First ifinfo section  2. title page  3. top node
-@c To find the locations, search for !!set
-
-@c The following is for Pesch for his RCS system.  
-@c This revision number *not* the same as the Edition number.
-@tex
-\def\$#1${{#1}}  % Kluge: collect RCS revision info without $...$
-\xdef\manvers{\$Revision$}  % For use in headers, footers too
-@end tex
-
-@c FOR UPDATES LEADING TO THIS DRAFT, GDB CHANGELOG CONSULTED BETWEEN:
-@c Fri Oct 11 23:27:06 1991  John Gilmore  (gnu at cygnus.com)
-@c Sat Dec 22 02:51:40 1990  John Gilmore  (gnu at cygint)
-
-@c THIS MANUAL REQUIRES TEXINFO-2 macros and info-makers to format properly.
-
-@ifinfo
-@format
-START-INFO-DIR-ENTRY
-* Gdb: (gdb).                   The GNU debugger.
-END-INFO-DIR-ENTRY
-@end format
-@end ifinfo
-@c
-@ifinfo
-This file documents the GNU debugger GDB.
-
-@c !!set edition, date, version
-This is Edition 4.01, January 1992, 
-of @cite{Using GDB: A Guide to the GNU Source-Level Debugger}
-for GDB Version 4.4.4.
-
-Copyright (C) 1988, 1989, 1990, 1991 1992 Free Software Foundation, Inc.
-
-Permission is granted to make and distribute verbatim copies of
-this manual provided the copyright notice and this permission notice
-are preserved on all copies.
-
-@ignore
-Permission is granted to process this file through TeX and print the
-results, provided the printed document carries copying permission
-notice identical to this one except for the removal of this paragraph
-(this paragraph not being relevant to the printed manual).
-
-@end ignore
-Permission is granted to copy and distribute modified versions of this
-manual under the conditions for verbatim copying, provided also that the
-section entitled ``GNU General Public License'' is included exactly as
-in the original, and provided that the entire resulting derived work is
-distributed under the terms of a permission notice identical to this
-one.
-
-Permission is granted to copy and distribute translations of this manual
-into another language, under the above conditions for modified versions,
-except that the section entitled ``GNU General Public License'' may be
-included in a translation approved by the Free Software Foundation
-instead of in the original English.
-@end ifinfo
-
-@titlepage
-@title Using GDB
-@subtitle A Guide to the GNU Source-Level Debugger
-@sp 1
-@c !!set edition, date, version
-@subtitle Edition 4.01, for GDB version 4.4.4
-@subtitle January 1992
-@author by Richard M. Stallman and Roland H. Pesch
-@page
-@tex
-{\parskip=0pt
-\hfill rms\@ai.mit.edu, pesch\@cygnus.com\par
-\hfill {\it Using GDB}, \manvers\par
-\hfill \TeX{}info \texinfoversion\par
-}
-@end tex
-
-@vskip 0pt plus 1filll
-Copyright @copyright{} 1988, 1989, 1990, 1991, 1992 Free Software Foundation, Inc.
-
-Permission is granted to make and distribute verbatim copies of
-this manual provided the copyright notice and this permission notice
-are preserved on all copies.
-
-Permission is granted to copy and distribute modified versions of this
-manual under the conditions for verbatim copying, provided also that the
-section entitled ``GNU General Public License'' is included exactly as
-in the original, and provided that the entire resulting derived work is
-distributed under the terms of a permission notice identical to this
-one.
-
-Permission is granted to copy and distribute translations of this manual
-into another language, under the above conditions for modified versions,
-except that the section entitled ``GNU General Public License'' may be
-included in a translation approved by the Free Software Foundation
-instead of in the original English.
-@end titlepage
-@page
-
-@ifinfo
-@node Top, Summary, (dir), (dir)
-@top GDB, the GNU symbolic debugger
-
-This file describes GDB, the GNU symbolic debugger.
-
-@c !!set edition, date, version
-This is Edition 4.01, January 1992, for GDB Version 4.4.4.
-@end ifinfo
-
-@menu
-* Summary::                     Summary of GDB
-* New Features::                New features since GDB version 3.5
-* Sample Session::              A Sample GDB session
-* Invocation::                  Getting in and out of GDB
-* Commands::                    GDB commands
-* Running::                     Running programs under GDB
-* Stopping::                    Stopping and continuing
-* Stack::                       Examining the stack
-* Source::                      Examining source files
-* Data::                        Examining data
-* Languages::                   Using GDB with different languages
-* Symbols::                     Examining the symbol table
-* Altering::                    Altering execution
-* GDB Files::                   GDB's files
-* Targets::                     Specifying a debugging target
-* Controlling GDB::             Controlling GDB
-* Sequences::                   Canned sequences of commands
-* Emacs::                       Using GDB under GNU Emacs
-* GDB Bugs::                    Reporting bugs in GDB
-* Renamed Commands::
-* Installing GDB::              Installing GDB
-* Copying::                     GNU GENERAL PUBLIC LICENSE
-* Index::                       Index
-
- --- The Detailed Node Listing ---
-
-Summary of GDB
-
-* Free Software::               Free Software
-* Contributors::                Contributors to GDB
-
-Getting In and Out of GDB
-
-* Invoking GDB::                Starting GDB
-* Leaving GDB::                 Leaving GDB
-* Shell Commands::              Shell Commands
-
-Starting GDB
-
-* File Options::                Choosing Files
-* Mode Options::                Choosing Modes
-
-GDB Commands
-
-* Command Syntax::              Command Syntax
-* Help::                        Getting Help
-
-Running Programs Under GDB
-
-* Compilation::                 Compiling for Debugging
-* Starting::                    Starting your Program
-* Arguments::                   Your Program's Arguments
-* Environment::                 Your Program's Environment
-* Working Directory::           Your Program's Working Directory
-* Input/Output::                Your Program's Input and Output
-* Attach::                      Debugging an Already-Running Process
-* Kill Process::                Killing the Child Process
-
-Stopping and Continuing
-
-* Breakpoints::                 Breakpoints, Watchpoints, and Exceptions
-* Continuing and Stepping::     Resuming Execution
-* Signals::                     Signals
-
-Breakpoints, Watchpoints, and Exceptions
-
-* Set Breaks::                  Setting Breakpoints
-* Set Watchpoints::             Setting Watchpoints
-* Exception Handling::          Breakpoints and Exceptions
-* Delete Breaks::               Deleting Breakpoints
-* Disabling::                   Disabling Breakpoints
-* Conditions::                  Break Conditions
-* Break Commands::              Breakpoint Command Lists
-* Breakpoint Menus::            Breakpoint Menus
-* Error in Breakpoints::        ``Cannot insert breakpoints''
-
-Examining the Stack
-
-* Frames::                      Stack Frames
-* Backtrace::                   Backtraces
-* Selection::                   Selecting a Frame
-* Frame Info::                  Information on a Frame
-
-Examining Source Files
-
-* List::                        Printing Source Lines
-* Search::                      Searching Source Files
-* Source Path::                 Specifying Source Directories
-* Machine Code::                Source and Machine Code
-
-Examining Data
-
-* Expressions::                 Expressions
-* Variables::                   Program Variables
-* Arrays::                      Artificial Arrays
-* Output formats::              Output formats
-* Memory::                      Examining Memory
-* Auto Display::                Automatic Display
-* Print Settings::              Print Settings
-* Value History::               Value History
-* Convenience Vars::            Convenience Variables
-* Registers::                   Registers
-* Floating Point Hardware::     Floating Point Hardware
-
-Using GDB with Different Languages
-
-* Setting::                     Switching between source languages
-* Show::                        Displaying the language
-* Checks::                      Type and Range checks
-* Support::                     Supported languages
-
-Switching between source languages
-
-* Manually::                    Setting the working language manually
-* Automatically::               Having GDB infer the source language
-
-Type and range Checking
-
-* Type Checking::               An overview of type checking
-* Range Checking::              An overview of range checking
-
-Supported Languages
-
-* C::                           C and C++
-* Modula-2::                    Modula-2
-
-C and C++
-
-* C Operators::                 C and C++ Operators
-* C Constants::                 C and C++ Constants
-* Cplusplus expressions::       C++ Expressions
-* C Defaults::                  Default settings for C and C++
-* C Checks::                    C and C++ Type and Range Checks
-* Debugging C::                 GDB and C
-* Debugging C plus plus::       Special features for C++
-
-Modula-2
-
-* M2 Operators::                Built-in operators
-* Built-In Func/Proc::           Built-in Functions and Procedures
-* M2 Constants::                Modula-2 Constants
-* M2 Defaults::                 Default settings for Modula-2
-* Deviations::                  Deviations from standard Modula-2
-* M2 Checks::                   Modula-2 Type and Range Checks
-* M2 Scope::                    The scope operators @code{::} and @code{.}
-* GDB/M2::                      GDB and Modula-2
-
-Altering Execution
-
-* Assignment::                  Assignment to Variables
-* Jumping::                     Continuing at a Different Address
-* Signaling::                   Giving your program a Signal
-* Returning::                   Returning from a Function
-* Calling::                     Calling your Program's Functions
-* Patching::                    Patching your Program
-
-GDB's Files
-
-* Files::                       Commands to Specify Files
-* Symbol Errors::               Errors Reading Symbol Files
-
-Specifying a Debugging Target
-
-* Active Targets::              Active Targets
-* Target Commands::             Commands for Managing Targets
-* Remote::                      Remote Debugging
-
-Remote Debugging
-
-* i960-Nindy Remote::           GDB with a Remote i960 (Nindy)
-* EB29K Remote::                GDB with a Remote EB29K
-* VxWorks Remote::              GDB and VxWorks
-
-GDB with a Remote i960 (Nindy)
-
-* Nindy Startup::               Startup with Nindy
-* Nindy Options::               Options for Nindy
-* Nindy reset::                 Nindy Reset Command
-
-GDB with a Remote EB29K
-
-* Comms (EB29K)::               Communications Setup
-* gdb-EB29K::                   EB29K cross-debugging
-* Remote Log::                  Remote Log
-
-GDB and VxWorks
-
-* VxWorks connection::          Connecting to VxWorks
-* VxWorks download::            VxWorks Download
-* VxWorks attach::              Running Tasks
-
-Controlling GDB
-
-* Prompt::                      Prompt
-* Editing::                     Command Editing
-* History::                     Command History
-* Screen Size::                 Screen Size
-* Numbers::                     Numbers
-* Messages/Warnings::           Optional Warnings and Messages
-
-Canned Sequences of Commands
-
-* Define::                      User-Defined Commands
-* Command Files::               Command Files
-* Output::                      Commands for Controlled Output
-
-Reporting Bugs in GDB
-
-* Bug Criteria::                Have You Found a Bug?
-* Bug Reporting::               How to Report Bugs
-
-Installing GDB
-
-* Separate Objdir::             Compiling GDB in another directory
-* Config Names::                Specifying names for hosts and targets
-* configure Options::           Summary of options for configure
-* Formatting Documentation::    How to format and print GDB documentation
-@end menu
-
-@node Summary, New Features, Top, Top
-@unnumbered Summary of GDB
-
-The purpose of a debugger such as GDB is to allow you to see what is
-going on ``inside'' another program while it executes---or what another
-program was doing at the moment it crashed.
-
-GDB can do four main kinds of things (plus other things in support of
-these) to help you catch bugs in the act:
-
-@itemize @bullet
-@item
-Start your program, specifying anything that might affect its behavior.
-
-@item
-Make your program stop on specified conditions.
-
-@item
-Examine what has happened, when your program has stopped.
-
-@item
-Change things in your program, so you can experiment with correcting the
-effects of one bug and go on to learn about another.
-@end itemize
-
-You can use GDB to debug programs written in C, C++, and Modula-2.
-Fortran support will be added when a GNU Fortran compiler is ready.
-
-@menu
-* Free Software::               Free Software
-* Contributors::                Contributors to GDB
-@end menu
-
-@node Free Software, Contributors, Summary, Summary
-@unnumberedsec Free Software
-
-GDB is @dfn{free software}, protected by the GNU General Public License
-(GPL).  The GPL gives you the freedom to copy or adapt a licensed
-program---but every person getting a copy also gets with it the
-freedom to modify that copy (which means that they must get access to
-the source code), and the freedom to distribute further copies.
-Typical software companies use copyrights to limit your freedoms; the
-Free Software Foundation uses the GPL to preserve these freedoms.
-
-Fundamentally, the General Public License is a license which says that
-you have these freedoms and that you cannot take these freedoms away
-from anyone else.
-
-For full details, @pxref{Copying, ,GNU GENERAL PUBLIC LICENSE}.
-
-@node Contributors,  , Free Software, Summary
-@unnumberedsec Contributors to GDB
-
-Richard Stallman was the original author of GDB, and of many other GNU
-programs.  Many others have contributed to its development.  This
-section attempts to credit major contributors.  One of the virtues of
-free software is that everyone is free to contribute to it; with
-regret, we cannot actually acknowledge everyone here.  The file
-@file{ChangeLog} in the GDB distribution approximates a blow-by-blow
-account.
-
-Changes much prior to version 2.0 are lost in the mists of time.
-
-@quotation
-@emph{Plea:} Additions to this section are particularly welcome.  If you
-or your friends (or enemies; let's be evenhanded) have been unfairly
-omitted from this list, we would like to add your names!
-@end quotation
-
-So that they may not regard their long labor as thankless, we
-particularly thank those who shepherded GDB through major releases: Stu
-Grossman and John Gilmore (release 4.4), John Gilmore (releases 4.3, 4.2,
-4.1, 4.0, and 3.9); Jim Kingdon (releases 3.5, 3.4, 3.3); and Randy
-Smith (releases 3.2, 3.1, 3.0).  As major maintainer of GDB for some
-period, each contributed significantly to the structure, stability, and
-capabilities of the entire debugger.
-
-Richard Stallman, assisted at various times by Pete TerMaat, Chris
-Hanson, and Richard Mlynarik, handled releases through 2.8.
-
-Michael Tiemann is the author of most of the GNU C++ support in GDB,
-with significant additional contributions from Per Bothner.  James
-Clark wrote the GNU C++ demangler.  Early work on C++ was by Peter
-TerMaat (who also did much general update work leading to release 3.0).
-
-GDB 4 uses the BFD subroutine library to examine multiple
-object-file formats; BFD was a joint project of David V.
-Henkel-Wallace, Rich Pixley, Steve Chamberlain, and John Gilmore.
-
-David Johnson wrote the original COFF support; Pace Willison did
-the original support for encapsulated COFF.
-
-Adam de Boor and Bradley Davis contributed the ISI Optimum V support.
-Per Bothner, Noboyuki Hikichi, and Alessandro Forin contributed MIPS
-support.  Jean-Daniel Fekete contributed Sun 386i support.  Chris
-Hanson improved the HP9000 support.  Noboyuki Hikichi and Tomoyuki
-Hasei contributed Sony/News OS 3 support.  David Johnson contributed
-Encore Umax support.  Jyrki Kuoppala contributed Altos 3068 support.
-Keith Packard contributed NS32K support.  Doug Rabson contributed
-Acorn Risc Machine support.  Chris Smith contributed Convex support
-(and Fortran debugging).  Jonathan Stone contributed Pyramid support.
-Michael Tiemann contributed SPARC support.  Tim Tucker contributed
-support for the Gould NP1 and Gould Powernode.  Pace Willison
-contributed Intel 386 support.  Jay Vosburgh contributed Symmetry
-support.
-
-Rich Schaefer and Peter Schauer helped with support of SunOS shared
-libraries.
-
-Jay Fenlason and Roland McGrath ensured that GDB and GAS agree about
-several machine instruction sets.
-
-Patrick Duval, Ted Goldstein, Vikram Koka and Glenn Engel helped
-develop remote debugging.  Intel Corporation and Wind River Systems
-contributed remote debugging modules for their products.
-
-Brian Fox is the author of the readline libraries providing
-command-line editing and command history.
-
-Andrew Beers of SUNY Buffalo wrote the language-switching code and
-the Modula-2 support, and contributed the Languages chapter of this
-manual.
-
-@node New Features, Sample Session, Summary, Top
-@unnumbered New Features since GDB version 3.5
-
-@table @emph
-@item Targets
-Using the new command @code{target}, you can select at runtime whether
-you are debugging local files, local processes, standalone systems over
-a serial port, realtime systems over a TCP/IP connection, etc.  The
-command @code{load} can download programs into a remote system.  Serial
-stubs are available for Motorola 680x0 and Intel 80386 remote systems;
-GDB also supports debugging realtime processes running under
-VxWorks, using SunRPC Remote Procedure Calls over TCP/IP to talk to a
-debugger stub on the target system.  Internally, GDB now uses a
-function vector to mediate access to different targets; if you need to
-add your own support for a remote protocol, this makes it much easier.
-
-@item Watchpoints
-GDB now sports watchpoints as well as breakpoints.  You can use a
-watchpoint to stop execution whenever the value of an expression
-changes, without having to predict a particular place in your program
-where this may happen.
-
-@item Wide Output
-Commands that issue wide output now insert newlines at places designed
-to make the output more readable.
-
-@item Object Code Formats
-GDB uses a new library called the Binary File Descriptor (BFD)
-Library to permit it to switch dynamically, without reconfiguration or
-recompilation, between different object-file formats.  Formats currently
-supported are COFF, a.out, and the Intel 960 b.out; files may be read as
-.o's, archive libraries, or core dumps.  BFD is available as a
-subroutine library so that other programs may take advantage of it, and
-the other GNU binary utilities are being converted to use it.
-
-@item Configuration and Ports
-Compile-time configuration (to select a particular architecture and
-operating system) is much easier.  The script @code{configure} now
-allows you to configure GDB as either a native debugger or a
-cross-debugger. @xref{Installing GDB}, for details on how to
-configure and on what architectures are now available.
-
-@item Interaction
-The user interface to GDB's control variables has been simplified
-and consolidated in two commands, @code{set} and @code{show}.  Output
-lines are now broken at readable places, rather than overflowing onto
-the next line.  You can suppress output of machine-level addresses,
-displaying only source language information.
-
-@item C++
-GDB now supports C++ multiple inheritance (if used with a GCC
-version 2 compiler), and also has limited support for C++ exception
-handling, with the commands @code{catch} and @code{info catch}: GDB
-can break when an exception is raised, before the stack is peeled back
-to the exception handler's context.
-
-@item Modula-2
-GDB now has preliminary support for the GNU Modula-2 compiler,
-currently under development at the State University of New York at
-Buffalo.  Coordinated development of both GDB and the GNU Modula-2
-compiler will continue into 1992.  Other Modula-2 compilers are
-currently not supported, and attempting to debug programs compiled with
-them will likely result in an error as the symbol table of the
-executable is read in.
-
-@item Command Rationalization
-Many GDB commands have been renamed to make them easier to remember
-and use.  In particular, the subcommands of @code{info} and
-@code{show}/@code{set} are grouped to make the former refer to the state
-of your program, and the latter refer to the state of GDB itself.
-@xref{Renamed Commands}, for details on what commands were renamed.
-
-@item Shared Libraries
-GDB 4 can debug programs and core files that use SunOS shared
-libraries.
-
-@item Reference Card
-GDB 4 has a reference card.  @xref{Formatting Documentation} for
-instructions on printing it.
-
-@item Work in Progress
-Kernel debugging for BSD and Mach systems; Tahoe and HPPA architecture
-support.
-@end table
-
-@node Sample Session, Invocation, New Features, Top
-@chapter A Sample GDB Session
-
-You can use this manual at your leisure to read all about GDB.
-However, a handful of commands are enough to get started using the
-debugger.  This chapter illustrates these commands.
-
-@iftex
-In this sample session, we emphasize user input like this: @i{input},
-to make it easier to pick out from the surrounding output.
-@end iftex
-
-@c FIXME: this example may not be appropriate for some configs, where
-@c FIXME...primary interest is in remote use.
-
-One of the preliminary versions of GNU @code{m4} (a generic macro
-processor) exhibits the following bug: sometimes, when we change its
-quote strings from the default, the commands used to capture one macro's
-definition in another stop working.  In the following short @code{m4}
-session, we define a macro @code{foo} which expands to @code{0000}; we
-then use the @code{m4} built-in @code{defn} to define @code{bar} as the
-same thing.  However, when we change the open quote string to
-@code{<QUOTE>} and the close quote string to @code{<UNQUOTE>}, the same
-procedure fails to define a new synonym @code{baz}:
-
-@smallexample
-$ @i{cd gnu/m4}
-$ @i{./m4}
-@i{define(foo,0000)}
-
-@i{foo}
-0000
-@i{define(bar,defn(`foo'))}
-
-@i{bar}
-0000
-@i{changequote(<QUOTE>,<UNQUOTE>)}
-
-@i{define(baz,defn(<QUOTE>foo<UNQUOTE>))}
-@i{baz}
-@i{C-d}
-m4: End of input: 0: fatal error: EOF in string
-@end smallexample
-
-@noindent
-Let's use GDB to try to see what's going on.
-
-@smallexample
-$ @i{gdb m4}
-@c FIXME: this falsifies the exact text played out, to permit smallbook
-@c FIXME... format to come out better.
-GDB is free software and you are welcome to distribute copies
- of it under certain conditions; type "show copying" to see 
- the conditions.
-There is absolutely no warranty for GDB; type "show warranty" 
-for details.
-GDB 4.4.4, Copyright 1992 Free Software Foundation, Inc...
-(gdb)
-@end smallexample
-
-@noindent
-GDB reads only enough symbol data to know where to find the rest when
-needed; as a result, the first prompt comes up very quickly.  We now
-tell GDB to use a narrower display width than usual, so that examples
-will fit in this manual.
-
-@smallexample
-(gdb) @i{set width 70}
-@end smallexample
-
-@noindent
-Let's see how the @code{m4} built-in @code{changequote} works.
-Having looked at the source, we know the relevant subroutine is
-@code{m4_changequote}, so we set a breakpoint there with GDB's
-@code{break} command.
-
-@smallexample
-(gdb) @i{break m4_changequote}
-Breakpoint 1 at 0x62f4: file builtin.c, line 879.
-@end smallexample
-
-@noindent
-Using the @code{run} command, we start @code{m4} running under GDB
-control; as long as control does not reach the @code{m4_changequote}
-subroutine, the program runs as usual:
-
-@smallexample
-(gdb) @i{run}
-Starting program: /work/Editorial/gdb/gnu/m4/m4
-@i{define(foo,0000)}
-
-@i{foo}
-0000
-@end smallexample
-
-@noindent
-To trigger the breakpoint, we call @code{changequote}.  GDB
-suspends execution of @code{m4}, displaying information about the
-context where it stops.
-
-@smallexample
-@i{changequote(<QUOTE>,<UNQUOTE>)}
-
-Breakpoint 1, m4_changequote (argc=3, argv=0x33c70) 
-    at builtin.c:879
-879         if (bad_argc(TOKEN_DATA_TEXT(argv[0]), argc, 1, 3))
-@end smallexample
-
-@noindent
-Now we use the command @code{n} (@code{next}) to advance execution to
-the next line of the current function.
-
-@smallexample
-(gdb) @i{n}
-882         set_quotes((argc >= 2) ? TOKEN_DATA_TEXT(argv[1])\
- : nil,
-@end smallexample
-
-@noindent
-@code{set_quotes} looks like a promising subroutine.  We can go into it
-by using the command @code{s} (@code{step}) instead of @code{next}.
-@code{step} goes to the next line to be executed in @emph{any}
-subroutine, so it steps into @code{set_quotes}.
-
-@smallexample
-(gdb) @i{s}
-set_quotes (lq=0x34c78 "<QUOTE>", rq=0x34c88 "<UNQUOTE>")
-    at input.c:530
-530         if (lquote != def_lquote)
-@end smallexample
-
-@noindent
-The display that shows the subroutine where @code{m4} is now
-suspended (and its arguments) is called a stack frame display.  It
-shows a summary of the stack.  We can use the @code{backtrace}
-command (which can also be spelled @code{bt}), to see where we are
-in the stack as a whole: the @code{backtrace} command displays a
-stack frame for each active subroutine.
-
-@smallexample
-(gdb) @i{bt}
-#0  set_quotes (lq=0x34c78 "<QUOTE>", rq=0x34c88 "<UNQUOTE>")
-    at input.c:530
-#1  0x6344 in m4_changequote (argc=3, argv=0x33c70) 
-    at builtin.c:882
-#2  0x8174 in expand_macro (sym=0x33320) at macro.c:242
-#3  0x7a88 in expand_token (obs=0x0, t=209696, td=0xf7fffa30)
-    at macro.c:71
-#4  0x79dc in expand_input () at macro.c:40
-#5  0x2930 in main (argc=0, argv=0xf7fffb20) at m4.c:195
-@end smallexample
-
-@noindent
-Let's step through a few more lines to see what happens.  The first two
-times, we can use @samp{s}; the next two times we use @code{n} to avoid
-falling into the @code{xstrdup} subroutine.
-
-@smallexample
-(gdb) @i{s}
-0x3b5c  532         if (rquote != def_rquote)
-(gdb) @i{s}
-0x3b80  535         lquote = (lq == nil || *lq == '\0') ?  \
-def_lquote : xstrdup(lq);
-(gdb) @i{n}
-536         rquote = (rq == nil || *rq == '\0') ? def_rquote\
- : xstrdup(rq);
-(gdb) @i{n}
-538         len_lquote = strlen(rquote);
-@end smallexample
-
-@noindent
-The last line displayed looks a little odd; let's examine the variables
-@code{lquote} and @code{rquote} to see if they are in fact the new left
-and right quotes we specified.  We can use the command @code{p}
-(@code{print}) to see their values.
-
-@smallexample
-(gdb) @i{p lquote}
-$1 = 0x35d40 "<QUOTE>"
-(gdb) @i{p rquote}
-$2 = 0x35d50 "<UNQUOTE>"
-@end smallexample
-
-@noindent
-@code{lquote} and @code{rquote} are indeed the new left and right quotes.
-Let's look at some context; we can display ten lines of source
-surrounding the current line, with the @code{l} (@code{list}) command.
-
-@smallexample
-(gdb) @i{l}
-533             xfree(rquote);
-534
-535         lquote = (lq == nil || *lq == '\0') ? def_lquote\
- : xstrdup (lq);
-536         rquote = (rq == nil || *rq == '\0') ? def_rquote\
- : xstrdup (rq);
-537
-538         len_lquote = strlen(rquote);
-539         len_rquote = strlen(lquote);
-540     @}
-541
-542     void
-@end smallexample
-
-@noindent
-Let's step past the two lines that set @code{len_lquote} and
-@code{len_rquote}, and then examine the values of those variables.
-
-@smallexample
-(gdb) @i{n}
-539         len_rquote = strlen(lquote);
-(gdb) @i{n}
-540     @}
-(gdb) @i{p len_lquote}
-$3 = 9
-(gdb) @i{p len_rquote}
-$4 = 7
-@end smallexample
-
-@noindent
-That certainly looks wrong, assuming @code{len_lquote} and
-@code{len_rquote} are meant to be the lengths of @code{lquote} and
-@code{rquote} respectively.  Let's try setting them to better values.
-We can use the @code{p} command for this, since it'll print the value of
-any expression---and that expression can include subroutine calls and
-assignments.
-
-@smallexample
-(gdb) p @i{len_lquote=strlen(lquote)}
-$5 = 7
-(gdb) p @i{len_rquote=strlen(rquote)}
-$6 = 9
-@end smallexample
-
-@noindent
-Let's see if that fixes the problem of using the new quotes with the
-@code{m4} built-in @code{defn}.  We can allow @code{m4} to continue
-executing with the @code{c} (@code{continue}) command, and then try the
-example that caused trouble initially:
-
-@smallexample
-(gdb) @i{c}
-Continuing.
-
-@i{define(baz,defn(<QUOTE>foo<UNQUOTE>))}
-
-baz
-0000
-@end smallexample
-
-@noindent
-Success!  The new quotes now work just as well as the default ones.  The
-problem seems to have been just the two typos defining the wrong
-lengths.  We'll let @code{m4} exit by giving it an EOF as input.
-
-@smallexample
-@i{C-d}
-Program exited normally.
-@end smallexample
-
-@noindent
-The message @samp{Program exited normally.} is from GDB; it
-indicates @code{m4} has finished executing.  We can end our GDB
-session with the GDB @code{quit} command.
-
-@smallexample
-(gdb) @i{quit}
-@end smallexample
-
-@node Invocation, Commands, Sample Session, Top
-@chapter Getting In and Out of GDB
-
-This chapter discusses how to start GDB, and how to get out of it.
-(The essentials: type @samp{gdb} to start GDB, and type @kbd{quit}
-or @kbd{C-d} to exit.)
-
-@menu
-* Invoking GDB::                Starting GDB
-* Leaving GDB::                 Leaving GDB
-* Shell Commands::              Shell Commands
-@end menu
-
-@node Invoking GDB, Leaving GDB, Invocation, Invocation
-@section Starting GDB
-
-Start GDB with the shell command @code{gdb}.  Once it's running,
-GDB reads commands from the terminal until you tell it to exit.
-
-You can also run @code{gdb} with a variety of arguments and options,
-to specify more of your debugging environment at the outset.
-
-The command-line options described here are designed
-to cover a variety of situations; in some environments, some of these
-options may effectively be unavailable.  
-
-
-The most usual way to start GDB is with one argument or two,
-specifying an executable program as the argument:
-
-@example
-gdb @var{program}
-@end example
-
-@noindent
-You can also start with both an executable program and a core file
-specified:
-
-@example
-gdb @var{program} @var{core}
-@end example
-
-You can, instead, specify a process ID as a second argument, if you want
-to debug a running process:
-
-@example
-gdb @var{program} 1234
-@end example
-
-@noindent
-would attach GDB to process @code{1234} (unless you also have a file
-named @file{1234}; GDB does check for a core file first).
-
-Taking advantage of the second command-line argument requires a fairly
-complete operating system; when you use GDB as a remote debugger
-attached to a bare board, there may not be any notion of ``process'',
-and there is often no way to get a core dump.
-
-@noindent
-You can further control how GDB starts up by using command-line
-options.  GDB itself can remind you of the options available.
-
-@noindent
-Type
-
-@example
-gdb -help
-@end example
-
-@noindent
-to display all available options and briefly describe their use
-(@samp{gdb -h} is a shorter equivalent).
-
-All options and command line arguments you give are processed
-in sequential order.  The order makes a difference when the
-@samp{-x} option is used.
-
-@menu
-* File Options::                Choosing Files
-* Mode Options::                Choosing Modes
-@end menu
-
-@node File Options, Mode Options, Invoking GDB, Invoking GDB
-@subsection Choosing Files
-
-When GDB starts, it reads any arguments other than options as
-specifying an executable file and core file (or process ID).  This is
-the same as if the arguments were specified by the @samp{-se} and
-@samp{-c} options respectively.  (GDB reads the first argument
-that does not have an associated option flag as equivalent to the
-@samp{-se} option followed by that argument; and the second argument
-that does not have an associated option flag, if any, as equivalent to
-the @samp{-c} option followed by that argument.)
-
-Many options have both long and short forms; both are shown in the
-following list.  GDB also recognizes the long forms if you truncate
-them, so long as enough of the option is present to be unambiguous.
-(If you prefer, you can flag option arguments with @samp{--} rather
-than @samp{-}, though we illustrate the more usual convention.)
-
-@table @code
-@item -symbols=@var{file}
-@itemx -s @var{file}
-Read symbol table from file @var{file}.
-
-@item -exec=@var{file}
-@itemx -e @var{file}
-Use file @var{file} as the executable file to execute when
-appropriate, and for examining pure data in conjunction with a core
-dump.
-
-@item -se=@var{file}
-Read symbol table from file @var{file} and use it as the executable
-file.
-
-@item -core=@var{file}
-@itemx -c @var{file}
-Use file @var{file} as a core dump to examine.
-
-@item -command=@var{file}
-@itemx -x @var{file}
-Execute GDB commands from file @var{file}.  @xref{Command Files}.
-
-@item -directory=@var{directory}
-@itemx -d @var{directory}
-Add @var{directory} to the path to search for source files.
-@end table
-
-@node Mode Options,  , File Options, Invoking GDB
-@subsection Choosing Modes
-
-You can run GDB in various alternative modes---for example, in
-batch mode or quiet mode.
-
-@table @code
-@item -nx
-@itemx -n
-Do not execute commands from any @file{.gdbinit} initialization files.
-Normally, the commands in these files are executed after all the
-command options and arguments have been processed.
-@xref{Command Files}.
-
-@item -quiet
-@itemx -q
-``Quiet''.  Do not print the introductory and copyright messages.  These
-messages are also suppressed in batch mode.
-
-@item -batch
-Run in batch mode.  Exit with status @code{0} after processing all the command
-files specified with @samp{-x} (and @file{.gdbinit}, if not inhibited).
-Exit with nonzero status if an error occurs in executing the GDB
-commands in the command files.
-
-Batch mode may be useful for running GDB as a filter, for example to
-download and run a program on another computer; in order to make this
-more useful, the message
-
-@example
-Program exited normally.
-@end example
-
-@noindent
-(which is ordinarily issued whenever a program running under GDB control
-terminates) is not issued when running in batch mode.
-
-@item -cd=@var{directory}
-Run GDB using @var{directory} as its working directory,
-instead of the current directory.
-
-@item -fullname
-@itemx -f
-Emacs sets this option when it runs GDB as a subprocess.  It tells GDB
-to output the full file name and line number in a standard,
-recognizable fashion each time a stack frame is displayed (which
-includes each time your program stops).  This recognizable format looks
-like two @samp{\032} characters, followed by the file name, line number
-and character position separated by colons, and a newline.  The
-Emacs-to-GDB interface program uses the two @samp{\032} characters as
-a signal to display the source code for the frame.
-
-@item -b @var{bps}
-Set the line speed (baud rate or bits per second) of any serial
-interface used by GDB for remote debugging.
-
-@item -tty=@var{device}
-Run using @var{device} for your program's standard input and output.
-@c FIXME: kingdon thinks there is more to -tty.  Investigate.
-@end table
-
-@node Leaving GDB, Shell Commands, Invoking GDB, Invocation
-@section Leaving GDB
-@cindex exiting GDB
-
-@table @code
-@item quit
-@kindex quit
-@kindex q
-To exit GDB, use the @code{quit} command (abbreviated @code{q}), or type
-an end-of-file character (usually @kbd{C-d}).
-@end table
-
-@cindex interrupt
-An interrupt (often @kbd{C-c}) will not exit from GDB, but rather
-will terminate the action of any GDB command that is in progress and
-return to GDB command level.  It is safe to type the interrupt
-character at any time because GDB does not allow it to take effect
-until a time when it is safe.
-
-If you have been using GDB to control an attached process or device, you
-can release it with the @code{detach} command; @pxref{Attach,
-,Debugging an Already-Running Process}..
-
-@node Shell Commands,  , Leaving GDB, Invocation
-@section Shell Commands
-
-If you need to execute occasional shell commands during your
-debugging session, there is no need to leave or suspend GDB; you can
-just use the @code{shell} command.
-
-@table @code
-@item shell @var{command string}
-@kindex shell
-@cindex shell escape
-Directs GDB to invoke an inferior shell to execute @var{command
-string}.  If it exists, the environment variable @code{SHELL} is used
-for the name of the shell to run.  Otherwise GDB uses
-@code{/bin/sh}.
-@end table
-
-The utility @code{make} is often needed in development environments.
-You do not have to use the @code{shell} command for this purpose in GDB:
-
-@table @code
-@item make @var{make-args}
-@kindex make
-@cindex calling make
-Causes GDB to execute an inferior @code{make} program with the specified
-arguments.  This is equivalent to @samp{shell make @var{make-args}}.
-@end table
-
-@node Commands, Running, Invocation, Top
-@chapter GDB Commands
-
-You can abbreviate GDB command if that abbreviation is unambiguous;
-and you can repeat certain GDB commands by typing just @key{RET}.
-
-@menu
-* Command Syntax::              Command Syntax
-* Help::                        Getting Help
-@end menu
-
-@node Command Syntax, Help, Commands, Commands
-@section Command Syntax
-
-A GDB command is a single line of input.  There is no limit on how long
-it can be.  It starts with a command name, which is followed by arguments
-whose meaning depends on the command name.  For example, the command
-@code{step} accepts an argument which is the number of times to step,
-as in @samp{step 5}.  You can also use the @code{step} command with
-no arguments.  Some command names do not allow any arguments.
-
-@cindex abbreviation
-GDB command names may always be truncated if that abbreviation is
-unambiguous.  Other possible command abbreviations are listed in the
-documentation for individual commands.  In some cases, even ambiguous
-abbreviations are allowed; for example, @code{s} is specially defined as
-equivalent to @code{step} even though there are other commands whose
-names start with @code{s}.  You can test abbreviations by using them as
-arguments to the @code{help} command.
-
-@cindex repeating commands
-@kindex RET
-A blank line as input to GDB (typing just @key{RET}) means to
-repeat the previous command. Certain commands (for example, @code{run})
-will not repeat this way; these are commands for which unintentional
-repetition might cause trouble and which you are unlikely to want to
-repeat.
-
-The @code{list} and @code{x} commands, when you repeat them with
-@key{RET}, construct new arguments rather than repeating
-exactly as typed.  This permits easy scanning of source or memory.
-
-GDB can also use @key{RET} in another way: to partition lengthy
-output, in a way similar to the common utility @code{more}
-(@pxref{Screen Size}).  Since it is easy to press one @key{RET} too many
-in this situation, GDB disables command repetition after any command
-that generates this sort of display.
-
-@kindex #
-@cindex comment
-A line of input starting with @kbd{#} is a comment; it does nothing.
-This is useful mainly in command files (@pxref{Command Files}).
-
-@node Help,  , Command Syntax, Commands
-@section Getting Help
-@cindex online documentation
-@kindex help
-
-You can always ask GDB itself for information on its commands, using the
-command @code{help}.
-
-@table @code
-@item help
-@itemx h
-@kindex h
-You can use @code{help} (abbreviated @code{h}) with no arguments to
-display a short list of named classes of commands:
-
-@smallexample
-(gdb) help
-List of classes of commands:
-
-running -- Running the program
-stack -- Examining the stack
-data -- Examining data
-breakpoints -- Making program stop at certain points
-files -- Specifying and examining files
-status -- Status inquiries
-support -- Support facilities
-user-defined -- User-defined commands
-aliases -- Aliases of other commands
-obscure -- Obscure features
-
-Type "help" followed by a class name for a list of 
-commands in that class.
-Type "help" followed by command name for full 
-documentation.
-Command name abbreviations are allowed if unambiguous.
-(gdb)
-@end smallexample
-
-@item help @var{class}
-Using one of the general help classes as an argument, you can get a
-list of the individual commands in that class.  For example, here is the
-help display for the class @code{status}:
-
-@smallexample
-(gdb) help status
-Status inquiries.
-
-List of commands:
-
-show -- Generic command for showing things set with "set"
-info -- Generic command for printing status
-
-Type "help" followed by command name for full 
-documentation.
-Command name abbreviations are allowed if unambiguous.
-(gdb)
-@end smallexample
-
-@item help @var{command}
-With a command name as @code{help} argument, GDB will display a
-short paragraph on how to use that command.
-@end table
-
-In addition to @code{help}, you can use the GDB commands @code{info}
-and @code{show} to inquire about the state of your program, or the state
-of GDB itself.  Each command supports many topics of inquiry; this
-manual introduces each of them in the appropriate context.  The listings
-under @code{info} and under @code{show} in the Index point to
-all the sub-commands.  @xref{Index}.
-
-@c @group
-@table @code
-@item info
-@kindex info
-@kindex i
-This command (abbreviated @code{i}) is for describing the state of your
-program; for example, it can list the arguments given to your program
-(@code{info args}), the registers currently in use (@code{info
-registers}), or the breakpoints you have set (@code{info breakpoints}).
-You can get a complete list of the @code{info} sub-commands with
-@w{@code{help info}}.
-
-@kindex show
-@item show
-In contrast, @code{show} is for describing the state of GDB itself.
-You can change most of the things you can @code{show}, by using the
-related command @code{set}; for example, you can control what number
-system is used for displays with @code{set radix}, or simply inquire
-which is currently in use with @code{show radix}.
-
-@kindex info set
-To display all the settable parameters and their current
-values, you can use @code{show} with no arguments; you may also use
-@code{info set}.  Both commands produce the same display.
-@c FIXME: "info set" violates the rule that "info" is for state of
-@c FIXME...program.  Ck w/ GNU: "info set" to be called something else,
-@c FIXME...or change desc of rule---eg "state of prog and debugging session"?
-@end table
-@c @end group
-
-Here are three miscellaneous @code{show} subcommands, all of which are
-exceptional in lacking corresponding @code{set} commands:
-
-@table @code
-@kindex show version
-@cindex version number
-@item show version
-Show what version of GDB is running.  You should include this
-information in GDB bug-reports.  If multiple versions of GDB are in
-use at your site, you may occasionally want to make sure what version
-of GDB you are running; as GDB evolves, new commands are introduced,
-and old ones may wither away.  The version number is also announced
-when you start GDB with no arguments.
-
-@kindex show copying
-@item show copying
-Display information about permission for copying GDB.
-
-@kindex show warranty
-@item show warranty
-Display the GNU ``NO WARRANTY'' statement.
-@end table
-
-@node Running, Stopping, Commands, Top
-@chapter Running Programs Under GDB
-
-To debug a program, you must run it under GDB.
-
-@menu
-* Compilation::                 Compiling for Debugging
-* Starting::                    Starting your Program
-* Arguments::                   Your Program's Arguments
-* Environment::                 Your Program's Environment
-* Working Directory::           Your Program's Working Directory
-* Input/Output::                Your Program's Input and Output
-* Attach::                      Debugging an Already-Running Process
-* Kill Process::                Killing the Child Process
-@end menu
-
-@node Compilation, Starting, Running, Running
-@section Compiling for Debugging
-
-In order to debug a program effectively, you need to generate
-debugging information when you compile it.  This debugging information
-is stored in the object file; it describes the data type of each
-variable or function and the correspondence between source line numbers
-and addresses in the executable code.
-
-To request debugging information, specify the @samp{-g} option when you run
-the compiler.
-
-Many C compilers are unable to handle the @samp{-g} and @samp{-O}
-options together.  Using those compilers, you cannot generate optimized
-executables containing debugging information.
-
-gcc, the GNU C compiler, supports @samp{-g} with or without
-@samp{-O}, making it possible to debug optimized code.  We recommend
-that you @emph{always} use @samp{-g} whenever you compile a program.
-You may think your program is correct, but there is no sense in pushing
-your luck.
-
-Some things do not work as well with @samp{-g -O} as with just
-@samp{-g}, particularly on machines with instruction scheduling.  If in
-doubt, recompile with @samp{-g} alone, and if this fixes the problem,
-please report it as a bug (including a test case!).
-
-Older versions of the GNU C compiler permitted a variant option
-@w{@samp{-gg}} for debugging information.  GDB no longer supports this
-format; if your GNU C compiler has this option, do not use it.
-
-@ignore
-@comment As far as I know, there are no cases in which GDB will
-@comment produce strange output in this case.  (but no promises).
-If your program includes archives made with the @code{ar} program, and
-if the object files used as input to @code{ar} were compiled without the
-@samp{-g} option and have names longer than 15 characters, GDB will get
-confused reading your program's symbol table.  No error message will be
-given, but GDB may behave strangely.  The reason for this problem is a
-deficiency in the Unix archive file format, which cannot represent file
-names longer than 15 characters.
-
-To avoid this problem, compile the archive members with the @samp{-g}
-option or use shorter file names.  Alternatively, use a version of GNU
-@code{ar} dated more recently than August 1989.
-@end ignore
-
-@node Starting, Arguments, Compilation, Running
-@section Starting your Program
-@cindex starting
-@cindex running
-
-@table @code
-@item run
-@itemx r
-@kindex run
-Use the @code{run} command to start your program under GDB.  You must
-first specify the program name
-(except on VxWorks)
-with an argument to
-GDB (@pxref{Invocation, ,Getting In and Out of GDB}), or by using the
-@code{file} or @code{exec-file} command (@pxref{Files, ,Commands to
-Specify Files}).
-
-@end table
-
-If you are running your program in an execution environment that
-supports processes, @code{run} creates an inferior process and makes
-that process run your program.  (In environments without processes,
-@code{run} jumps to the start of your program.)
-
-The execution of a program is affected by certain information it
-receives from its superior.  GDB provides ways to specify this
-information, which you must do @i{before} starting your program.  (You
-can change it after starting your program, but such changes will only affect
-your program the next time you start it.)  This information may be
-divided into four categories:
-
-@table @asis
-@item The @i{arguments.}
-Specify the arguments to give your program as the arguments of the
-@code{run} command.  If a shell is available on your target, the shell
-is used to pass the arguments, so that you may use normal conventions
-(such as wildcard expansion or variable substitution) in describing
-the arguments.  In Unix systems, you can control which shell is used
-with the @code{SHELL} environment variable. @xref{Arguments, ,Your
-Program's Arguments}.
-
-@item The @i{environment.}
-Your program normally inherits its environment from GDB, but you can
-use the GDB commands @code{set environment} and @code{unset
-environment} to change parts of the environment that will be given to
-your program.  @xref{Environment, ,Your Program's Environment}.
-
-@item The @i{working directory.}
-Your program inherits its working directory from GDB.  You can set
-GDB's working directory with the @code{cd} command in GDB.
-@xref{Working Directory, ,Your Program's Working Directory}.
-
-@item The @i{standard input and output.}
-Your program normally uses the same device for standard input and
-standard output as GDB is using.  You can redirect input and output
-in the @code{run} command line, or you can use the @code{tty} command to
-set a different device for your program.
-@xref{Input/Output, ,Your Program's Input and Output}.
-
-@cindex pipes
-@emph{Warning:} While input and output redirection work, you cannot use
-pipes to pass the output of the program you are debugging to another
-program; if you attempt this, GDB is likely to wind up debugging the
-wrong program.
-@end table
-
-@c FIXME: Rewrite following paragraph, especially its third sentence.
-When you issue the @code{run} command, your program begins to execute
-immediately.  @xref{Stopping, ,Stopping and Continuing}, for
-discussion of how to arrange for your program to stop.  Once your
-program has been started by the @code{run} command (and then stopped),
-you may evaluate expressions that involve calls to functions in your 
-program, using the @code{print} or @code{call} commands.  @xref{Data,
-,Examining Data}.
-
-If the modification time of your symbol file has changed since the
-last time GDB read its symbols, GDB will discard its symbol table and
-re-read it.  When it does this, GDB tries to retain your current
-breakpoints.
-
-@node Arguments, Environment, Starting, Running
-@section Your Program's Arguments
-
-@cindex arguments (to your program)
-The arguments to your program can be specified by the arguments of the
-@code{run} command.  They are passed to a shell, which expands wildcard
-characters and performs redirection of I/O, and thence to your program.
-GDB uses the shell indicated by your environment variable
-@code{SHELL} if it exists; otherwise, GDB uses @code{/bin/sh}.
-
-@code{run} with no arguments uses the same arguments used by the previous
-@code{run}, or those set by the @code{set args} command.
-
-@kindex set args
-@table @code
-@item set args
-Specify the arguments to be used the next time your program is run.  If
-@code{set args} has no arguments, @code{run} will execute your program
-with no arguments.  Once you have run your program with arguments,
-using @code{set args} before the next @code{run} is the only way to run
-it again without arguments.
-
-@item show args
-@kindex show args
-Show the arguments to give your program when it is started.
-@end table
-
-@node Environment, Working Directory, Arguments, Running
-@section Your Program's Environment
-
-@cindex environment (of your program)
-The @dfn{environment} consists of a set of environment variables and
-their values.  Environment variables conventionally record such things as
-your user name, your home directory, your terminal type, and your search
-path for programs to run.  Usually you set up environment variables with
-the shell and they are inherited by all the other programs you run.  When
-debugging, it can be useful to try running your program with a modified
-environment without having to start GDB over again.
-
-@table @code
-@item path @var{directory}
-@kindex path
-Add @var{directory} to the front of the @code{PATH} environment variable
-(the search path for executables), for both GDB and your program.
-You may specify several directory names, separated by @samp{:} or
-whitespace.  If @var{directory} is already in the path, it is moved to
-the front, so it will be searched sooner.
-
-You can use the string @samp{$cwd} to refer to whatever is the current
-working directory at the time GDB searches the path.  If you use
-@samp{.} instead, it refers to the directory where you executed the
-@code{path} command.  GDB fills in the current path where needed in
-the @var{directory} argument, before adding it to the search path.
-@c 'path' is explicitly nonrepeatable, but RMS points out it is silly to
-@c document that, since repeating it would be a no-op.
-
-@item show paths
-@kindex show paths
-Display the list of search paths for executables (the @code{PATH}
-environment variable).
-
-@item show environment @r{[}@var{varname}@r{]}
-@kindex show environment
-Print the value of environment variable @var{varname} to be given to
-your program when it starts.  If you do not supply @var{varname},
-print the names and values of all environment variables to be given to
-your program.  You can abbreviate @code{environment} as @code{env}.
-
-@item set environment @var{varname} @r{[}=@r{]} @var{value}
-@kindex set environment
-Sets environment variable @var{varname} to @var{value}.  The value
-changes for your program only, not for GDB itself.  @var{value} may
-be any string; the values of environment variables are just strings, and
-any interpretation is supplied by your program itself.  The @var{value}
-parameter is optional; if it is eliminated, the variable is set to a
-null value.
-@c "any string" here does not include leading, trailing
-@c blanks. Gnu asks: does anyone care?
-
-For example, this command:
-
-@example
-set env USER = foo
-@end example
-
-@noindent
-tells a Unix program, when subsequently run, that its user is named
-@samp{foo}.  (The spaces around @samp{=} are used for clarity here; they
-are not actually required.)
-
-@item unset environment @var{varname}
-@kindex unset environment
-Remove variable @var{varname} from the environment to be passed to your
-program.  This is different from @samp{set env @var{varname} =};
-@code{unset environment} removes the variable from the environment,
-rather than assigning it an empty value.
-@end table
-
-@node Working Directory, Input/Output, Environment, Running
-@section Your Program's Working Directory
-
-@cindex working directory (of your program)
-Each time you start your program with @code{run}, it inherits its
-working directory from the current working directory of GDB.  GDB's
-working directory is initially whatever it inherited from its parent
-process (typically the shell), but you can specify a new working
-directory in GDB with the @code{cd} command.
-
-The GDB working directory also serves as a default for the commands
-that specify files for GDB to operate on.  @xref{Files, ,Commands to
-Specify Files}.
-
-@table @code
-@item cd @var{directory}
-@kindex cd
-Set GDB's working directory to @var{directory}.
-
-@item pwd
-@kindex pwd
-Print GDB's working directory.
-@end table
-
-@node Input/Output, Attach, Working Directory, Running
-@section Your Program's Input and Output
-
-@cindex redirection
-@cindex i/o
-@cindex terminal
-By default, the program you run under GDB does input and output to
-the same terminal that GDB uses.  GDB switches the terminal to
-its own terminal modes to interact with you, but it records the terminal
-modes your program was using and switches back to them when you continue
-running your program.
-
-@table @code
-@item info terminal
-@kindex info terminal
-Displays GDB's recorded information about the terminal modes your
-program is using.
-@end table
-
-You can redirect your program's input and/or output using shell
-redirection with the @code{run} command.  For example,
-
-@example
-run > outfile
-@end example
-
-@noindent
-starts your program, diverting its output to the file @file{outfile}.
-
-@kindex tty
-@cindex controlling terminal
-Another way to specify where your program should do input and output is
-with the @code{tty} command.  This command accepts a file name as
-argument, and causes this file to be the default for future @code{run}
-commands.  It also resets the controlling terminal for the child
-process, for future @code{run} commands.  For example,
-
-@example
-tty /dev/ttyb
-@end example
-
-@noindent
-directs that processes started with subsequent @code{run} commands
-default to do input and output on the terminal @file{/dev/ttyb} and have
-that as their controlling terminal.
-
-An explicit redirection in @code{run} overrides the @code{tty} command's
-effect on the input/output device, but not its effect on the controlling
-terminal.
-
-When you use the @code{tty} command or redirect input in the @code{run}
-command, only the input @emph{for your program} is affected.  The input
-for GDB still comes from your terminal.
-
-@node Attach, Kill Process, Input/Output, Running
-@section Debugging an Already-Running Process
-@kindex attach
-@cindex attach
-
-@table @code
-@item attach @var{process-id}
-This command
-attaches to a running process---one that was started outside GDB.
-(@code{info files} will show your active targets.)  The command takes as
-argument a process ID.  The usual way to find out the process-id of
-a Unix process is with the @code{ps} utility, or with the @samp{jobs -l}
-shell command.
-
-@code{attach} will not repeat if you press @key{RET} a second time after
-executing the command.
-@end table
-
-To use @code{attach}, you must be debugging in an environment which
-supports processes.  You must also have permission to send the process a
-signal, and it must have the same effective user ID as the GDB
-process.
-
-When using @code{attach}, you should first use the @code{file} command
-to specify the program running in the process and load its symbol table.
-@xref{Files, ,Commands to Specify Files}.
-
-The first thing GDB does after arranging to debug the specified
-process is to stop it.  You can examine and modify an attached process
-with all the GDB commands that are ordinarily available when you start
-processes with @code{run}.  You can insert breakpoints; you can step and
-continue; you can modify storage.  If you would rather the process
-continue running, you may use the @code{continue} command after
-attaching GDB to the process.
-
-@table @code
-@item detach
-@kindex detach
-When you have finished debugging the attached process, you can use the
-@code{detach} command to release it from GDB's control.  Detaching
-the process continues its execution.  After the @code{detach} command,
-that process and GDB become completely independent once more, and you
-are ready to @code{attach} another process or start one with @code{run}.
-@code{detach} will not repeat if you press @key{RET} again after
-executing the command.
-@end table
-
-If you exit GDB or use the @code{run} command while you have an attached
-process, you kill that process.  By default, you will be asked for
-confirmation if you try to do either of these things; you can control
-whether or not you need to confirm by using the @code{set confirm} command
-(@pxref{Messages/Warnings, ,Optional Warnings and Messages}).
-
-@node Kill Process,  , Attach, Running
-@c @group
-@section Killing the Child Process
-
-@table @code
-@item kill
-@kindex kill
-Kill the child process in which your program is running under GDB.
-@end table
-
-This command is useful if you wish to debug a core dump instead of a
-running process.  GDB ignores any core dump file while your program
-is running.
-@c @end group
-
-On some operating systems, a program cannot be executed outside GDB
-while you have breakpoints set on it inside GDB.  You can use the
-@code{kill} command in this situation to permit running your program
-outside the debugger.
-
-The @code{kill} command is also useful if you wish to recompile and
-relink your program, since on many systems it is impossible to modify an
-executable file while it is running in a process.  In this case, when you
-next type @code{run}, GDB will notice that the file has changed, and
-will re-read the symbol table (while trying to preserve your current
-breakpoint settings).
-
-@node Stopping, Stack, Running, Top
-@chapter Stopping and Continuing
-
-The principal purpose of using a debugger is so that you can stop your
-program before it terminates; or so that, if your program runs into
-trouble, you can investigate and find out why.
-
-Inside GDB, your program may stop for any of several reasons, such
-as a signal, a breakpoint, or reaching a new line after a GDB
-command such as @code{step}.  You may then examine and change
-variables, set new breakpoints or remove old ones, and then continue
-execution.  Usually, the messages shown by GDB provide ample
-explanation of the status of your program---but you can also explicitly
-request this information at any time.
-
-@table @code
-@item info program
-@kindex info program
-Display information about the status of your program: whether it is
-running or not, what process it is, and why it stopped.
-@end table
-
-@menu
-* Breakpoints::                 Breakpoints, Watchpoints, and Exceptions
-* Continuing and Stepping::     Resuming Execution
-* Signals::                     Signals
-@end menu
-
-@node Breakpoints, Continuing and Stepping, Stopping, Stopping
-@section Breakpoints, Watchpoints, and Exceptions
-
-@cindex breakpoints
-A @dfn{breakpoint} makes your program stop whenever a certain point in
-the program is reached.  For each breakpoint, you can add various
-conditions to control in finer detail whether your program will stop.
-You can set breakpoints with the @code{break} command and its variants
-(@pxref{Set Breaks, ,Setting Breakpoints}), to specify the place where
-your program should stop by line number, function name or exact address
-in the program.  In languages with exception handling (such as GNU
-C++), you can also set breakpoints where an exception is raised
-(@pxref{Exception Handling, ,Breakpoints and Exceptions}).
-
-@cindex watchpoints
-A @dfn{watchpoint} is a special breakpoint that stops your program
-when the value of an expression changes.  You must use a different
-command to set watchpoints (@pxref{Set Watchpoints, ,Setting
-Watchpoints}), but aside from that, you can manage a watchpoint like
-any other breakpoint: you enable, disable, and delete both breakpoints
-and watchpoints using the same commands.
-
-Each breakpoint or watchpoint is assigned a number when it is created;
-these numbers are successive integers starting with one.  In many of the
-commands for controlling various features of breakpoints you use the
-breakpoint number to say which breakpoint you want to change.  Each
-breakpoint may be @dfn{enabled} or @dfn{disabled}; if disabled, it has
-no effect on your program until you enable it again.
-
-@menu
-* Set Breaks::                  Setting Breakpoints
-* Set Watchpoints::             Setting Watchpoints
-* Exception Handling::          Breakpoints and Exceptions
-* Delete Breaks::               Deleting Breakpoints
-* Disabling::                   Disabling Breakpoints
-* Conditions::                  Break Conditions
-* Break Commands::              Breakpoint Command Lists
-* Breakpoint Menus::            Breakpoint Menus
-* Error in Breakpoints::
-@end menu
-
-@node Set Breaks, Set Watchpoints, Breakpoints, Breakpoints
-@subsection Setting Breakpoints
-
-@c FIXME LMB what does GDB do if no code on line of breakpt?  
-@c       consider in particular declaration with/without initialization.
-@c
-@c FIXME 2 is there stuff on this already? break at fun start, already init?
-
-@kindex break
-@kindex b
-Breakpoints are set with the @code{break} command (abbreviated @code{b}).
-
-You have several ways to say where the breakpoint should go.
-
-@table @code
-@item break @var{function}
-Set a breakpoint at entry to function @var{function}.  When using source
-languages that permit overloading of symbols, such as C++,
-@var{function} may refer to more than one possible place to break.
-@xref{Breakpoint Menus}, for a discussion of that situation.
-
-@item break +@var{offset}
-@itemx break -@var{offset}
-Set a breakpoint some number of lines forward or back from the position
-at which execution stopped in the currently selected frame.
-
-@item break @var{linenum}
-Set a breakpoint at line @var{linenum} in the current source file.
-That file is the last file whose source text was printed.  This
-breakpoint will stop your program just before it executes any of the
-code on that line.
-
-@item break @var{filename}:@var{linenum}
-Set a breakpoint at line @var{linenum} in source file @var{filename}.
-
-@item break @var{filename}:@var{function}
-Set a breakpoint at entry to function @var{function} found in file
-@var{filename}.  Specifying a file name as well as a function name is
-superfluous except when multiple files contain similarly named
-functions.
-
-@item break *@var{address}
-Set a breakpoint at address @var{address}.  You can use this to set
-breakpoints in parts of your program which do not have debugging
-information or source files.
-
-@item break
-When called without any arguments, @code{break} sets a breakpoint at
-the next instruction to be executed in the selected stack frame
-(@pxref{Stack, ,Examining the Stack}).  In any selected frame but the
-innermost, this will cause your program to stop as soon as control
-returns to that frame.  This is similar to the effect of a
-@code{finish} command in the frame inside the selected frame---except
-that @code{finish} does not leave an active breakpoint.  If you use
-@code{break} without an argument in the innermost frame, GDB will stop
-the next time it reaches the current location; this may be useful
-inside loops.
-
-GDB normally ignores breakpoints when it resumes execution, until at
-least one instruction has been executed.  If it did not do this, you
-would be unable to proceed past a breakpoint without first disabling the
-breakpoint.  This rule applies whether or not the breakpoint already
-existed when your program stopped.
-
-@item break @dots{} if @var{cond}
-Set a breakpoint with condition @var{cond}; evaluate the expression
-@var{cond} each time the breakpoint is reached, and stop only if the
-value is nonzero---that is, if @var{cond} evaluates as true.
-@samp{@dots{}} stands for one of the possible arguments described
-above (or no argument) specifying where to break.  @xref{Conditions,
-,Break Conditions}, for more information on breakpoint conditions.
-
-@item tbreak @var{args}
-@kindex tbreak
-Set a breakpoint enabled only for one stop.  @var{args} are the
-same as for the @code{break} command, and the breakpoint is set in the same
-way, but the breakpoint is automatically disabled after the first time your
-program stops there.  @xref{Disabling, ,Disabling Breakpoints}.
-
-@item rbreak @var{regex}
-@kindex rbreak
-@cindex regular expression
-@c FIXME what kind of regexp?
-Set breakpoints on all functions matching the regular expression
-@var{regex}.  This command
-sets an unconditional breakpoint on all matches, printing a list of all
-breakpoints it set. Once these breakpoints are set, they are treated
-just like the breakpoints set with the @code{break} command.  They can
-be deleted, disabled, made conditional, etc., in the standard ways.
-
-When debugging C++ programs, @code{rbreak} is useful for setting
-breakpoints on overloaded functions that are not members of any special
-classes.
-
-@kindex info breakpoints
-@cindex @code{$_} and @code{info breakpoints}
-@item info breakpoints @r{[}@var{n}@r{]}
-@item info break @r{[}@var{n}@r{]}
-Print a list of all breakpoints (but not watchpoints) set and not
-deleted, showing their numbers, where in your program they are, and any
-special features in use for them. Disabled breakpoints are included in
-the list, but marked as disabled. @code{info break} with a breakpoint
-number @var{n} as argument lists only that breakpoint.  The
-convenience variable @code{$_} and the default examining-address for
-the @code{x} command are set to the address of the last breakpoint
-listed (@pxref{Memory, ,Examining Memory}).  The equivalent command
-for watchpoints is @code{info watch}. 
-@end table
-
-GDB allows you to set any number of breakpoints at the same place in
-your program.  There is nothing silly or meaningless about this.  When
-the breakpoints are conditional, this is even useful
-(@pxref{Conditions, ,Break Conditions}).
-
-@node Set Watchpoints, Exception Handling, Set Breaks, Breakpoints
-@subsection Setting Watchpoints
-@cindex setting watchpoints
-
-You can use a watchpoint to stop execution whenever the value of an
-expression changes, without having to predict a particular place
-where this may happen.
-
-Watchpoints currently execute two orders of magnitude more slowly than
-other breakpoints, but this can well be worth it to catch errors where
-you have no clue what part of your program is the culprit.  Some
-processors provide special hardware to support watchpoint evaluation; future
-releases of GDB will use such hardware if it is available.
-
-@table @code
-@kindex watch
-@item watch @var{expr}
-Set a watchpoint for an expression.
-
-@kindex info watchpoints
-@item info watchpoints
-This command prints a list of watchpoints; it is otherwise similar to
-@code{info break}.
-@end table
-
-@node Exception Handling, Delete Breaks, Set Watchpoints, Breakpoints
-@subsection Breakpoints and Exceptions
-@cindex exception handlers
-
-Some languages, such as GNU C++, implement exception handling.  You can
-use GDB to examine what caused your program to raise an exception,
-and to list the exceptions your program is prepared to handle at a
-given point in time.
-
-@table @code
-@item catch @var{exceptions}
-@kindex catch
-You can set breakpoints at active exception handlers by using the
-@code{catch} command.  @var{exceptions} is a list of names of exceptions
-to catch.
-@end table
-
-You can use @code{info catch} to list active exception handlers.
-@xref{Frame Info, ,Information About a Frame}.
-
-There are currently some limitations to exception handling in GDB.
-These will be corrected in a future release.
-
-@itemize @bullet
-@item
-If you call a function interactively, GDB normally returns
-control to you when the function has finished executing.  If the call
-raises an exception, however, the call may bypass the mechanism that
-returns control to you and cause your program to simply continue
-running until it hits a breakpoint, catches a signal that GDB is
-listening for, or exits.
-@item
-You cannot raise an exception interactively.
-@item
-You cannot interactively install an exception handler.
-@end itemize
-
-@cindex raise exceptions
-Sometimes @code{catch} is not the best way to debug exception handling:
-if you need to know exactly where an exception is raised, it is better to
-stop @emph{before} the exception handler is called, since that way you
-can see the stack before any unwinding takes place.  If you set a
-breakpoint in an exception handler instead, it may not be easy to find
-out where the exception was raised.
-
-To stop just before an exception handler is called, you need some
-knowledge of the implementation.  In the case of GNU C++, exceptions are
-raised by calling a library function named @code{__raise_exception}
-which has the following ANSI C interface:
-
-@example
-    /* @var{addr} is where the exception identifier is stored.
-       ID is the exception identifier.  */
-    void __raise_exception (void **@var{addr}, void *@var{id});
-@end example
-
-@noindent
-To make the debugger catch all exceptions before any stack
-unwinding takes place, set a breakpoint on @code{__raise_exception}
-(@pxref{Breakpoints, ,Breakpoints Watchpoints and Exceptions}).
-
-With a conditional breakpoint (@pxref{Conditions, ,Break Conditions})
-that depends on the value of @var{id}, you can stop your program when
-a specific exception is raised.  You can use multiple conditional
-breakpoints to stop your program when any of a number of exceptions are
-raised.
-
-@node Delete Breaks, Disabling, Exception Handling, Breakpoints
-@subsection Deleting Breakpoints
-
-@cindex clearing breakpoints, watchpoints
-@cindex deleting breakpoints, watchpoints
-It is often necessary to eliminate a breakpoint or watchpoint once it
-has done its job and you no longer want your program to stop there.  This
-is called @dfn{deleting} the breakpoint.  A breakpoint that has been
-deleted no longer exists; it is forgotten.
-
-With the @code{clear} command you can delete breakpoints according to
-where they are in your program.  With the @code{delete} command you can
-delete individual breakpoints or watchpoints by specifying their
-breakpoint numbers.
-
-It is not necessary to delete a breakpoint to proceed past it.  GDB
-automatically ignores breakpoints on the first instruction to be executed
-when you continue execution without changing the execution address.
-
-@table @code
-@item clear
-@kindex clear
-Delete any breakpoints at the next instruction to be executed in the
-selected stack frame (@pxref{Selection, ,Selecting a Frame}).  When
-the innermost frame is selected, this is a good way to delete a
-breakpoint where your program just stopped.
-
-@item clear @var{function}
-@itemx clear @var{filename}:@var{function}
-Delete any breakpoints set at entry to the function @var{function}.
-
-@item clear @var{linenum}
-@itemx clear @var{filename}:@var{linenum}
-Delete any breakpoints set at or within the code of the specified line.
-
-@item delete @r{[}breakpoints@r{]} @r{[}@var{bnums}@dots{}@r{]}
-@cindex delete breakpoints
-@kindex delete
-@kindex d
-Delete the breakpoints or watchpoints of the numbers specified as
-arguments.  If no argument is specified, delete all breakpoints (GDB
-asks confirmation, unless you have @code{set confirm off}).  You
-can abbreviate this command as @code{d}.
-@end table
-
-@node Disabling, Conditions, Delete Breaks, Breakpoints
-@subsection Disabling Breakpoints
-
-@cindex disabled breakpoints
-@cindex enabled breakpoints
-Rather than deleting a breakpoint or watchpoint, you might prefer to
-@dfn{disable} it.  This makes the breakpoint inoperative as if it had
-been deleted, but remembers the information on the breakpoint so that
-you can @dfn{enable} it again later.
-
-You disable and enable breakpoints and watchpoints with the
-@code{enable} and @code{disable} commands, optionally specifying one or
-more breakpoint numbers as arguments.  Use @code{info break} or
-@code{info watch} to print a list of breakpoints or watchpoints if you
-do not know which numbers to use.
-
-A breakpoint or watchpoint can have any of four different states of
-enablement:
-
-@itemize @bullet
-@item
-Enabled.  The breakpoint will stop your program.  A breakpoint set
-with the @code{break} command starts out in this state.
-@item
-Disabled.  The breakpoint has no effect on your program.
-@item
-Enabled once.  The breakpoint will stop your program, but
-when it does so it will become disabled.  A breakpoint set
-with the @code{tbreak} command starts out in this state.
-@item
-Enabled for deletion.  The breakpoint will stop your program, but
-immediately after it does so it will be deleted permanently.
-@end itemize
-
-You can use the following commands to enable or disable breakpoints and
-watchpoints:
-
-@table @code
-@item disable @r{[}breakpoints@r{]} @r{[}@var{bnums}@dots{}@r{]}
-@kindex disable breakpoints
-@kindex disable
-@kindex dis
-Disable the specified breakpoints---or all breakpoints, if none are
-listed.  A disabled breakpoint has no effect but is not forgotten.  All
-options such as ignore-counts, conditions and commands are remembered in
-case the breakpoint is enabled again later.  You may abbreviate
-@code{disable} as @code{dis}.
-
-@item enable @r{[}breakpoints@r{]} @r{[}@var{bnums}@dots{}@r{]}
-@kindex enable breakpoints
-@kindex enable
-Enable the specified breakpoints (or all defined breakpoints).  They
-become effective once again in stopping your program.
-
-@item enable @r{[}breakpoints@r{]} once @var{bnums}@dots{}
-Enable the specified breakpoints temporarily.  Each will be disabled
-again the next time it stops your program.
-
-@item enable @r{[}breakpoints@r{]} delete @var{bnums}@dots{}
-Enable the specified breakpoints to work once and then die.  Each of
-the breakpoints will be deleted the next time it stops your program.
-@end table
-
-Save for a breakpoint set with @code{tbreak} (@pxref{Set Breaks,
-,Setting Breakpoints}), breakpoints that you set are initially
-enabled; subsequently, they become disabled or enabled only when you
-use one of the commands above.  (The command @code{until} can set and
-delete a breakpoint of its own, but it will not change the state of
-your other breakpoints; see @ref{Continuing and Stepping, ,Continuing and Stepping}.)
-
-@node Conditions, Break Commands, Disabling, Breakpoints
-@subsection Break Conditions
-@cindex conditional breakpoints
-@cindex breakpoint conditions
-
-@c FIXME what is scope of break condition expr?  Context where wanted?
-@c      in particular for a watchpoint?  
-The simplest sort of breakpoint breaks every time your program reaches a
-specified place.  You can also specify a @dfn{condition} for a
-breakpoint.  A condition is just a Boolean expression in your
-programming language (@pxref{Expressions, ,Expressions}).  A breakpoint with
-a condition evaluates the expression each time your program reaches it,
-and your program stops only if the condition is @emph{true}.
-
-This is the converse of using assertions for program validation; in that
-situation, you want to stop when the assertion is violated---that is,
-when the condition is false.  In C, if you want to test an assertion expressed
-by the condition @var{assert}, you should set the condition
-@samp{! @var{assert}} on the appropriate breakpoint.
-
-Conditions are also accepted for watchpoints; you may not need them,
-since a watchpoint is inspecting the value of an expression anyhow---but
-it might be simpler, say, to just set a watchpoint on a variable name,
-and specify a condition that tests whether the new value is an interesting
-one.
-
-Break conditions can have side effects, and may even call functions in
-your program.  This can be useful, for example, to activate functions
-that log program progress, or to use your own print functions to
-format special data structures. The effects are completely predictable
-unless there is another enabled breakpoint at the same address.  (In
-that case, GDB might see the other breakpoint first and stop your
-program without checking the condition of this one.)  Note that
-breakpoint commands are usually more convenient and flexible for the
-purpose of performing side effects when a breakpoint is reached
-(@pxref{Break Commands, ,Breakpoint Command Lists}).
-
-Break conditions can be specified when a breakpoint is set, by using
-@samp{if} in the arguments to the @code{break} command.  @xref{Set
-Breaks, ,Setting Breakpoints}.  They can also be changed at any time
-with the @code{condition} command.  The @code{watch} command does not
-recognize the @code{if} keyword; @code{condition} is the only way to
-impose a further condition on a watchpoint.
-
-@table @code
-@item condition @var{bnum} @var{expression}
-@kindex condition
-Specify @var{expression} as the break condition for breakpoint or
-watchpoint number @var{bnum}.  From now on, this breakpoint will stop
-your program only if the value of @var{expression} is true (nonzero, in
-C).  When you use @code{condition}, GDB checks @var{expression}
-immediately for syntactic correctness, and to determine whether symbols
-in it have referents in the context of your breakpoint.
-@c FIXME so what does GDB do if there is no referent?  Moreover, what
-@c about watchpoints?
-GDB does
-not actually evaluate @var{expression} at the time the @code{condition}
-command is given, however.  @xref{Expressions, ,Expressions}.
-
-@item condition @var{bnum}
-Remove the condition from breakpoint number @var{bnum}.  It becomes
-an ordinary unconditional breakpoint.
-@end table
-
-@cindex ignore count (of breakpoint)
-A special case of a breakpoint condition is to stop only when the
-breakpoint has been reached a certain number of times.  This is so
-useful that there is a special way to do it, using the @dfn{ignore
-count} of the breakpoint.  Every breakpoint has an ignore count, which
-is an integer.  Most of the time, the ignore count is zero, and
-therefore has no effect.  But if your program reaches a breakpoint whose
-ignore count is positive, then instead of stopping, it just decrements
-the ignore count by one and continues.  As a result, if the ignore count
-value is @var{n}, the breakpoint will not stop the next @var{n} times it
-is reached.
-
-@table @code
-@item ignore @var{bnum} @var{count}
-@kindex ignore
-Set the ignore count of breakpoint number @var{bnum} to @var{count}.
-The next @var{count} times the breakpoint is reached, your program's
-execution will not stop; other than to decrement the ignore count, GDB
-takes no action.
-
-To make the breakpoint stop the next time it is reached, specify
-a count of zero.
-
-@item continue @var{count}
-@itemx c @var{count}
-@itemx fg @var{count}
-@kindex continue @var{count}
-Continue execution of your program, setting the ignore count of the
-breakpoint where your program stopped to @var{count} minus one.
-Thus, your program will not stop at this breakpoint until the
-@var{count}'th time it is reached.
-
-An argument to this command is meaningful only when your program stopped
-due to a breakpoint.  At other times, the argument to @code{continue} is
-ignored.
-
-The synonym @code{fg} is provided purely for convenience, and has
-exactly the same behavior as other forms of the command.
-@end table
-
-If a breakpoint has a positive ignore count and a condition, the condition
-is not checked.  Once the ignore count reaches zero, the condition will
-be checked.
-
-You could achieve the effect of the ignore count with a condition such
-as @w{@samp{$foo-- <= 0}} using a debugger convenience variable that
-is decremented each time.  @xref{Convenience Vars, ,Convenience
-Variables}.
-
-@node Break Commands, Breakpoint Menus, Conditions, Breakpoints
-@subsection Breakpoint Command Lists
-
-@cindex breakpoint commands
-You can give any breakpoint (or watchpoint) a series of commands to
-execute when your program stops due to that breakpoint.  For example, you
-might want to print the values of certain expressions, or enable other
-breakpoints.
-
-@table @code
-@item commands @r{[}@var{bnum}@r{]}
-@itemx @dots{} @var{command-list} @dots{}
-@itemx end
-@kindex commands
-@kindex end
-Specify a list of commands for breakpoint number @var{bnum}.  The commands
-themselves appear on the following lines.  Type a line containing just
-@code{end} to terminate the commands.
-
-To remove all commands from a breakpoint, type @code{commands} and
-follow it immediately with @code{end}; that is, give no commands.
-
-With no @var{bnum} argument, @code{commands} refers to the last
-breakpoint or watchpoint set (not to the breakpoint most recently
-encountered).
-@end table
-
-Pressing @key{RET} as a means of repeating the last GDB command is
-disabled within a @var{command-list}.
-
-You can use breakpoint commands to start your program up again.  Simply
-use the @code{continue} command, or @code{step}, or any other command
-that resumes execution.  Subsequent commands in the command list are
-ignored.
-
-@kindex silent
-If the first command specified is @code{silent}, the usual message about
-stopping at a breakpoint is not printed.  This may be desirable for
-breakpoints that are to print a specific message and then continue.
-If the remaining commands too print nothing, you will see no sign that
-the breakpoint was reached at all.  @code{silent} is meaningful only
-at the beginning of a breakpoint command list.
-
-The commands @code{echo} and @code{output} that allow you to print
-precisely controlled output are often useful in silent breakpoints.
-@xref{Output, ,Commands for Controlled Output}.
-
-For example, here is how you could use breakpoint commands to print the
-value of @code{x} at entry to @code{foo} whenever @code{x} is positive.
-
-@example
-break foo if x>0
-commands
-silent
-echo x is\040
-output x
-echo \n
-cont
-end
-@end example
-
-One application for breakpoint commands is to compensate for one bug so
-you can test for another.  Put a breakpoint just after the erroneous line
-of code, give it a condition to detect the case in which something
-erroneous has been done, and give it commands to assign correct values
-to any variables that need them.  End with the @code{continue} command
-so that your program does not stop, and start with the @code{silent}
-command so that no output is produced.  Here is an example:
-
-@example
-break 403
-commands
-silent
-set x = y + 4
-cont
-end
-@end example
-
-@cindex lost output
-One deficiency in the operation of automatically continuing breakpoints
-under Unix appears when your program uses raw mode for the terminal.
-GDB switches back to its own terminal modes (not raw) before executing
-commands, and then must switch back to raw mode when your program is
-continued.  This causes any pending terminal input to be lost.
-@c FIXME: revisit below when GNU sys avail.
-@c In the GNU system, this will be fixed by changing the behavior of
-@c terminal modes.
-
-Under Unix, you can get around this problem by writing actions into
-the breakpoint condition rather than in commands.  For example
-
-@example
-condition 5  (x = y + 4), 0
-@end example
-
-@noindent
-specifies a condition expression (@pxref{Expressions, ,Expressions}) that will
-change @code{x} as needed, then always have the value zero so your
-program will not stop.  No input is lost here, because GDB evaluates
-break conditions without changing the terminal modes.  When you want
-to have nontrivial conditions for performing the side effects, the
-operators @samp{&&}, @samp{||} and @samp{?@dots{}:} may be useful.
-
-@node Breakpoint Menus, Error in Breakpoints, Break Commands, Breakpoints
-@subsection Breakpoint Menus
-@cindex overloading
-@cindex symbol overloading
-
-Some programming languages (notably C++) permit a single function name
-to be defined several times, for application in different contexts.
-This is called @dfn{overloading}.  When a function name is overloaded,
-@samp{break @var{function}} is not enough to tell GDB where you
-want a breakpoint.  GDB offers you a menu of numbered choices for
-different possible breakpoints, and waits for your selection with the
-prompt @samp{>}.  The first two options are always @samp{[0] cancel}
-and @samp{[1] all}.  Typing @kbd{1} sets a breakpoint at each
-definition of @var{function}, and typing @kbd{0} aborts the
-@code{break} command without setting any new breakpoints.
-
-For example, the following session excerpt shows an attempt to set a
-breakpoint at the overloaded symbol @code{String::after}.
-We choose three particular definitions of that function name:
-
-@example
-(gdb) b String::after
-[0] cancel
-[1] all
-[2] file:String.cc; line number:867
-[3] file:String.cc; line number:860
-[4] file:String.cc; line number:875
-[5] file:String.cc; line number:853
-[6] file:String.cc; line number:846
-[7] file:String.cc; line number:735
-> 2 4 6
-Breakpoint 1 at 0xb26c: file String.cc, line 867.
-Breakpoint 2 at 0xb344: file String.cc, line 875.
-Breakpoint 3 at 0xafcc: file String.cc, line 846.
-Multiple breakpoints were set.
-Use the "delete" command to delete unwanted breakpoints.
-(gdb)
-@end example
-
-@node Error in Breakpoints,  , Breakpoint Menus, Breakpoints
-@subsection ``Cannot Insert Breakpoints''
-
-@c FIXME: "cannot insert breakpoints" error, v unclear.
-@c        Q in pending mail to Gilmore. ---pesch@cygnus.com, 26mar91
-@c        some light may be shed by looking at instances of
-@c        ONE_PROCESS_WRITETEXT.  But error seems possible otherwise
-@c        too.  pesch, 20sep91
-Under some operating systems, breakpoints cannot be used in a program if
-any other process is running that program.  In this situation,
-attempting to run or continue a program with a breakpoint causes GDB
-to stop the other process.
-
-When this happens, you have three ways to proceed:
-
-@enumerate
-@item
-Remove or disable the breakpoints, then continue.
-
-@item
-Suspend GDB, and copy the file containing your program to a new name.
-Resume GDB and use the @code{exec-file} command to specify that GDB
-should run your program under that name.  Then start your program again.
-
-@c FIXME: RMS commented here "Show example".  Maybe when someone
-@c explains the first FIXME: in this section...
-
-@item
-Relink your program so that the text segment is nonsharable, using the
-linker option @samp{-N}.  The operating system limitation may not apply
-to nonsharable executables.
-@end enumerate
-
-@node Continuing and Stepping, Signals, Breakpoints, Stopping
-@section Continuing and Stepping
-
-@cindex stepping
-@cindex continuing
-@cindex resuming execution
-@dfn{Continuing} means resuming program execution until your program
-completes normally.  In contrast, @dfn{stepping} means executing just
-one more ``step'' of your program, where ``step'' may mean either one
-line of source code, or one machine instruction (depending on what
-particular command you use).  Either when continuing
-or when stepping, your program may stop even sooner, due to a breakpoint
-or to a signal.  (If due to a signal, you may want to use @code{handle},
-or use @samp{signal 0} to resume execution.  @xref{Signals, ,Signals}.)
-
-@table @code
-@item continue @r{[}@var{ignore-count}@r{]}
-@kindex continue
-Resume program execution, at the address where your program last stopped;
-any breakpoints set at that address are bypassed.  The optional argument
-@var{ignore-count} allows you to specify a further number of times to
-ignore a breakpoint at this location; its effect is like that of
-@code{ignore} (@pxref{Conditions, ,Break Conditions}).
-
-To resume execution at a different place, you can use @code{return}
-(@pxref{Returning, ,Returning from a Function}) to go back to the
-calling function; or @code{jump} (@pxref{Jumping, ,Continuing at a
-Different Address}) to go to an arbitrary location in your program.
-@end table
-
-A typical technique for using stepping is to set a breakpoint
-(@pxref{Breakpoints, ,Breakpoints Watchpoints and Exceptions}) at the
-beginning of the function or the section of your program where a
-problem is believed to lie, run your program until it stops at that
-breakpoint, and then step through the suspect area, examining the
-variables that are interesting, until you see the problem happen.
-
-@table @code
-@item step
-@kindex step
-@kindex s
-Continue running your program until control reaches a different source
-line, then stop it and return control to GDB.  This command is
-abbreviated @code{s}.
-
-@quotation
-@emph{Warning:} If you use the @code{step} command while control is
-within a function that was compiled without debugging information,
-execution will proceed until control reaches another function.
-@end quotation
-
-@item step @var{count}
-Continue running as in @code{step}, but do so @var{count} times.  If a
-breakpoint is reached or a signal not related to stepping occurs before
-@var{count} steps, stepping stops right away.
-
-@item next @r{[}@var{count}@r{]}
-@kindex next
-@kindex n
-Continue to the next source line in the current (innermost) stack frame.
-Similar to @code{step}, but any function calls appearing within the line
-of code are executed without stopping.  Execution stops when control
-reaches a different line of code at the stack level which was executing
-when the @code{next} command was given.  This command is abbreviated
-@code{n}.
-
-An argument @var{count} is a repeat count, as for @code{step}.
-
-@code{next} within a function that lacks debugging information acts like
-@code{step}, but any function calls appearing within the code of the
-function are executed without stopping.
-
-@item finish
-@kindex finish
-Continue running until just after function in the selected stack frame
-returns.  Print the returned value (if any).
-
-Contrast this with the @code{return} command (@pxref{Returning,
-,Returning from a Function}).
-
-@item until
-@kindex until
-@item u
-@kindex u
-Continue running until a source line past the current line, in the
-current stack frame, is reached.  This command is used to avoid single
-stepping through a loop more than once.  It is like the @code{next}
-command, except that when @code{until} encounters a jump, it
-automatically continues execution until the program counter is greater
-than the address of the jump.
-
-This means that when you reach the end of a loop after single stepping
-though it, @code{until} will cause your program to continue execution
-until the loop is exited.  In contrast, a @code{next} command at the end
-of a loop will simply step back to the beginning of the loop, which
-would force you to step through the next iteration.
-
-@code{until} always stops your program if it attempts to exit the current
-stack frame.
-
-@code{until} may produce somewhat counterintuitive results if the order
-of machine code does not match the order of the source lines.  For
-example, in the following excerpt from a debugging session, the @code{f}
-(@code{frame}) command shows that execution is stopped at line
-@code{206}; yet when we use @code{until}, we get to line @code{195}:
-
-@example
-(gdb) f
-#0  main (argc=4, argv=0xf7fffae8) at m4.c:206
-206                 expand_input();
-(gdb) until
-195             for ( ; argc > 0; NEXTARG) @{
-@end example
-
-This happened because, for execution efficiency, the compiler had
-generated code for the loop closure test at the end, rather than the
-start, of the loop---even though the test in a C @code{for}-loop is
-written before the body of the loop.  The @code{until} command appeared
-to step back to the beginning of the loop when it advanced to this
-expression; however, it has not really gone to an earlier
-statement---not in terms of the actual machine code.
-
-@code{until} with no argument works by means of single
-instruction stepping, and hence is slower than @code{until} with an
-argument.
-
-@item until @var{location}
-@item u @var{location}
-Continue running your program until either the specified location is
-reached, or the current stack frame returns.  @var{location} is any of
-the forms of argument acceptable to @code{break} (@pxref{Set Breaks,
-,Setting Breakpoints}).  This form of the command uses breakpoints,
-and hence is quicker than @code{until} without an argument.
-
-@item stepi
-@itemx si
-@kindex stepi
-@kindex si
-Execute one machine instruction, then stop and return to the debugger.
-
-It is often useful to do @samp{display/i $pc} when stepping by machine
-instructions.  This will cause the next instruction to be executed to
-be displayed automatically at each stop.  @xref{Auto Display,
-,Automatic Display}.
-
-An argument is a repeat count, as in @code{step}.
-
-@item nexti
-@itemx ni
-@kindex nexti
-@kindex ni
-Execute one machine instruction, but if it is a function call,
-proceed until the function returns.
-
-An argument is a repeat count, as in @code{next}.
-@end table
-
-@node Signals,  , Continuing and Stepping, Stopping
-@section Signals
-@cindex signals
-
-A signal is an asynchronous event that can happen in a program.  The
-operating system defines the possible kinds of signals, and gives each
-kind a name and a number.  For example, in Unix @code{SIGINT} is the
-signal a program gets when you type an interrupt (often @kbd{C-c});
-@code{SIGSEGV} is the signal a program gets from referencing a place in
-memory far away from all the areas in use; @code{SIGALRM} occurs when
-the alarm clock timer goes off (which happens only if your program has
-requested an alarm).
-
-@cindex fatal signals
-Some signals, including @code{SIGALRM}, are a normal part of the
-functioning of your program.  Others, such as @code{SIGSEGV}, indicate
-errors; these signals are @dfn{fatal} (kill your program immediately) if the
-program has not specified in advance some other way to handle the signal.
-@code{SIGINT} does not indicate an error in your program, but it is normally
-fatal so it can carry out the purpose of the interrupt: to kill the program.
-
-GDB has the ability to detect any occurrence of a signal in your
-program.  You can tell GDB in advance what to do for each kind of
-signal.
-
-@cindex handling signals
-Normally, GDB is set up to ignore non-erroneous signals like @code{SIGALRM}
-(so as not to interfere with their role in the functioning of your program)
-but to stop your program immediately whenever an error signal happens.
-You can change these settings with the @code{handle} command.
-
-@table @code
-@item info signals
-@kindex info signals
-Print a table of all the kinds of signals and how GDB has been told to
-handle each one.  You can use this to see the signal numbers of all
-the defined types of signals.
-
-@item handle @var{signal} @var{keywords}@dots{}
-@kindex handle
-Change the way GDB handles signal @var{signal}.  @var{signal} can be the
-number of a signal or its name (with or without the @samp{SIG} at the
-beginning).  The @var{keywords} say what change to make.
-@end table
-
-@c @group
-The keywords allowed by the @code{handle} command can be abbreviated.
-Their full names are:
-
-@table @code
-@item nostop
-GDB should not stop your program when this signal happens.  It may
-still print a message telling you that the signal has come in.
-
-@item stop
-GDB should stop your program when this signal happens.  This implies
-the @code{print} keyword as well.
-
-@item print
-GDB should print a message when this signal happens.
-
-@item noprint
-GDB should not mention the occurrence of the signal at all.  This
-implies the @code{nostop} keyword as well.
-
-@item pass
-GDB should allow your program to see this signal; your program will be
-able to handle the signal, or may be terminated if the signal is fatal
-and not handled.
-
-@item nopass
-GDB should not allow your program to see this signal.
-@end table
-@c @end group
-
-When a signal has been set to stop your program, your program cannot see the
-signal until you continue.  It will see the signal then, if @code{pass} is
-in effect for the signal in question @i{at that time}.  In other words,
-after GDB reports a signal, you can use the @code{handle} command with
-@code{pass} or @code{nopass} to control whether that signal will be seen by
-your program when you later continue it.
-
-You can also use the @code{signal} command to prevent your program from
-seeing a signal, or cause it to see a signal it normally would not see,
-or to give it any signal at any time.  For example, if your program stopped
-due to some sort of memory reference error, you might store correct
-values into the erroneous variables and continue, hoping to see more
-execution; but your program would probably terminate immediately as
-a result of the fatal signal once it saw the signal.  To prevent this,
-you can continue with @samp{signal 0}.  @xref{Signaling, ,Giving your
-Program a Signal}. 
-
-@node Stack, Source, Stopping, Top
-@chapter Examining the Stack
-
-When your program has stopped, the first thing you need to know is where it
-stopped and how it got there.
-
-@cindex call stack
-Each time your program performs a function call, the information about
-where in your program the call was made from is saved in a block of data
-called a @dfn{stack frame}.  The frame also contains the arguments of the
-call and the local variables of the function that was called.  All the
-stack frames are allocated in a region of memory called the @dfn{call
-stack}.
-
-When your program stops, the GDB commands for examining the stack allow you
-to see all of this information.
-
-@cindex selected frame
-One of the stack frames is @dfn{selected} by GDB and many GDB commands
-refer implicitly to the selected frame.  In particular, whenever you ask
-GDB for the value of a variable in your program, the value is found in the
-selected frame.  There are special GDB commands to select whichever frame
-you are interested in.
-
-When your program stops, GDB automatically selects the currently executing
-frame and describes it briefly as the @code{frame} command does
-(@pxref{Frame Info, ,Information About a Frame}).
-
-@menu
-* Frames::                      Stack Frames
-* Backtrace::                   Backtraces
-* Selection::                   Selecting a Frame
-* Frame Info::                  Information on a Frame
-@end menu
-
-@node Frames, Backtrace, Stack, Stack
-@section Stack Frames
-
-@cindex frame
-@cindex stack frame
-The call stack is divided up into contiguous pieces called @dfn{stack
-frames}, or @dfn{frames} for short; each frame is the data associated
-with one call to one function.  The frame contains the arguments given
-to the function, the function's local variables, and the address at
-which the function is executing.
-
-@cindex initial frame
-@cindex outermost frame
-@cindex innermost frame
-When your program is started, the stack has only one frame, that of the
-function @code{main}.  This is called the @dfn{initial} frame or the
-@dfn{outermost} frame.  Each time a function is called, a new frame is
-made.  Each time a function returns, the frame for that function invocation
-is eliminated.  If a function is recursive, there can be many frames for
-the same function.  The frame for the function in which execution is
-actually occurring is called the @dfn{innermost} frame.  This is the most
-recently created of all the stack frames that still exist.
-
-@cindex frame pointer
-Inside your program, stack frames are identified by their addresses.  A
-stack frame consists of many bytes, each of which has its own address; each
-kind of computer has a convention for choosing one of those bytes whose
-address serves as the address of the frame.  Usually this address is kept
-in a register called the @dfn{frame pointer register} while execution is
-going on in that frame.
-
-@cindex frame number
-GDB assigns numbers to all existing stack frames, starting with
-zero for the innermost frame, one for the frame that called it,
-and so on upward.  These numbers do not really exist in your program;
-they are assigned by GDB to give you a way of designating stack
-frames in GDB commands.
-
-@cindex frameless execution
-Some compilers allow functions to be compiled so that they operate
-without stack frames.  (For example, the @code{gcc} option
-@samp{-fomit-frame-pointer} will generate functions without a frame.)
-This is occasionally done with heavily used library functions to save
-the frame setup time.  GDB has limited facilities for dealing with
-these function invocations.  If the innermost function invocation has no
-stack frame, GDB will nevertheless regard it as though it had a
-separate frame, which is numbered zero as usual, allowing correct
-tracing of the function call chain.  However, GDB has no provision
-for frameless functions elsewhere in the stack.
-
-@node Backtrace, Selection, Frames, Stack
-@section Backtraces
-
-A backtrace is a summary of how your program got where it is.  It shows one
-line per frame, for many frames, starting with the currently executing
-frame (frame zero), followed by its caller (frame one), and on up the
-stack.
-
-@table @code
-@item backtrace
-@itemx bt
-@kindex backtrace
-@kindex bt
-Print a backtrace of the entire stack: one line per frame for all
-frames in the stack.
-
-You can stop the backtrace at any time by typing the system interrupt
-character, normally @kbd{C-c}.
-
-@item backtrace @var{n}
-@itemx bt @var{n}
-Similar, but print only the innermost @var{n} frames.
-
-@item backtrace -@var{n}
-@itemx bt -@var{n}
-Similar, but print only the outermost @var{n} frames.
-@end table
-
-@kindex where
-@kindex info stack
-@kindex info s
-The names @code{where} and @code{info stack} (abbreviated @code{info s})
-are additional aliases for @code{backtrace}.
-
-Each line in the backtrace shows the frame number and the function name.
-The program counter value is also shown---unless you use @code{set
-print address off}.  The backtrace also shows the source file name and
-line number, as well as the arguments to the function.  The program
-counter value is omitted if it is at the beginning of the code for that
-line number.
-
-Here is an example of a backtrace.  It was made with the command
-@samp{bt 3}, so it shows the innermost three frames.
-
-@smallexample
-@group
-#0  m4_traceon (obs=0x24eb0, argc=1, argv=0x2b8c8) 
-    at builtin.c:993
-#1  0x6e38 in expand_macro (sym=0x2b600) at macro.c:242
-#2  0x6840 in expand_token (obs=0x0, t=177664, td=0xf7fffb08)
-    at macro.c:71
-(More stack frames follow...)
-@end group
-@end smallexample
-
-@noindent
-The display for frame zero does not begin with a program counter
-value, indicating that your program has stopped at the beginning of the
-code for line @code{993} of @code{builtin.c}.
-
-@node Selection, Frame Info, Backtrace, Stack
-@section Selecting a Frame
-
-Most commands for examining the stack and other data in your program work on
-whichever stack frame is selected at the moment.  Here are the commands for
-selecting a stack frame; all of them finish by printing a brief description
-of the stack frame just selected.
-
-@table @code
-@item frame @var{n}
-@itemx f @var{n}
-@kindex frame
-@kindex f
-Select frame number @var{n}.  Recall that frame zero is the innermost
-(currently executing) frame, frame one is the frame that called the
-innermost one, and so on.  The highest-numbered frame is @code{main}'s
-frame.
-
-@item frame @var{addr}
-@itemx f @var{addr}
-Select the frame at address @var{addr}.  This is useful mainly if the
-chaining of stack frames has been damaged by a bug, making it
-impossible for GDB to assign numbers properly to all frames.  In
-addition, this can be useful when your program has multiple stacks and
-switches between them.
-
-On the SPARC architecture, @code{frame} needs two addresses to
-select an arbitrary frame: a frame pointer and a stack pointer.
-@c note to future updaters: this is conditioned on a flag
-@c FRAME_SPECIFICATION_DYADIC in the tm-*.h files, currently only used
-@c by SPARC, hence the specific attribution.  Generalize or list all
-@c possibilities if more supported machines start doing this.
-
-@item up @var{n}
-@kindex up
-Move @var{n} frames up the stack.  For positive numbers @var{n}, this
-advances toward the outermost frame, to higher frame numbers, to frames
-that have existed longer.  @var{n} defaults to one.
-
-@item down @var{n}
-@kindex down
-@kindex do
-Move @var{n} frames down the stack.  For positive numbers @var{n}, this
-advances toward the innermost frame, to lower frame numbers, to frames
-that were created more recently.  @var{n} defaults to one.  You may
-abbreviate @code{down} as @code{do}.
-@end table
-
-All of these commands end by printing two lines of output describing the
-frame.  The first line shows the frame number, the function name, the
-arguments, and the source file and line number of execution in that
-frame.  The second line shows the text of that source line.  For
-example:
-
-@smallexample
-@group
-(gdb) up
-#1  0x22f0 in main (argc=1, argv=0xf7fffbf4, env=0xf7fffbfc)
-    at env.c:10
-10              read_input_file (argv[i]);
-@end group
-@end smallexample
-
-After such a printout, the @code{list} command with no arguments will
-print ten lines centered on the point of execution in the frame.
-@xref{List, ,Printing Source Lines}.
-
-@table @code
-@item up-silently @var{n}
-@itemx down-silently @var{n}
-@kindex down-silently
-@kindex up-silently
-These two commands are variants of @code{up} and @code{down},
-respectively; they differ in that they do their work silently, without
-causing display of the new frame.  They are intended primarily for use
-in GDB command scripts, where the output might be unnecessary and
-distracting.
-@end table
-
-@node Frame Info,  , Selection, Stack
-@section Information About a Frame
-
-There are several other commands to print information about the selected
-stack frame.
-
-@table @code
-@item frame
-@itemx f
-When used without any argument, this command does not change which
-frame is selected, but prints a brief description of the currently
-selected stack frame.  It can be abbreviated @code{f}.  With an
-argument, this command is used to select a stack frame
-(@pxref{Selection, ,Selecting a Frame}).
-
-@item info frame
-@itemx info f
-@kindex info frame
-@kindex info f
-This command prints a verbose description of the selected stack frame,
-including the address of the frame, the addresses of the next frame down
-(called by this frame) and the next frame up (caller of this frame), the
-language that the source code corresponding to this frame was written in,
-the address of the frame's arguments, the program counter saved in it
-(the address of execution in the caller frame), and which registers
-were saved in the frame.  The verbose description is useful when
-something has gone wrong that has made the stack format fail to fit
-the usual conventions.
-
-@item info frame @var{addr}
-@itemx info f @var{addr}
-Print a verbose description of the frame at address @var{addr},
-without selecting that frame.  The selected frame remains unchanged by
-this command.
-
-@item info args
-@kindex info args
-Print the arguments of the selected frame, each on a separate line.
-
-@item info locals
-@kindex info locals
-Print the local variables of the selected frame, each on a separate
-line.  These are all variables declared static or automatic within all
-program blocks that execution in this frame is currently inside of.
-
-@item info catch
-@kindex info catch
-@cindex catch exceptions
-@cindex exception handlers
-Print a list of all the exception handlers that are active in the
-current stack frame at the current point of execution.  To see other
-exception handlers, visit the associated frame (using the @code{up},
-@code{down}, or @code{frame} commands); then type @code{info catch}.
-@xref{Exception Handling, ,Breakpoints and Exceptions}.
-@end table
-
-@node Source, Data, Stack, Top
-@chapter Examining Source Files
-
-GDB can print parts of your program's source, since the debugging
-information recorded in your program tells GDB what source files were
-used to build it.  When your program stops, GDB spontaneously prints
-the line where it stopped.  Likewise, when you select a stack frame
-(@pxref{Selection, ,Selecting a Frame}), GDB prints the line where
-execution in that frame has stopped.  You can print other portions of
-source files by explicit command.
-
-If you use GDB through its GNU Emacs interface, you may prefer to use
-Emacs facilities to view source; @pxref{Emacs, ,Using GDB under GNU
-Emacs}.
-
-@menu
-* List::                        Printing Source Lines
-* Search::                      Searching Source Files
-* Source Path::                 Specifying Source Directories
-* Machine Code::                Source and Machine Code
-@end menu
-
-@node List, Search, Source, Source
-@section Printing Source Lines
-
-@kindex list
-@kindex l
-To print lines from a source file, use the @code{list} command
-(abbreviated @code{l}).  There are several ways to specify what part
-of the file you want to print.
-
-Here are the forms of the @code{list} command most commonly used:
-
-@table @code
-@item list @var{linenum}
-Print lines centered around line number @var{linenum} in the
-current source file.
-
-@item list @var{function}
-Print lines centered around the beginning of function
-@var{function}.
-
-@item list
-Print more lines.  If the last lines printed were printed with a
-@code{list} command, this prints lines following the last lines
-printed; however, if the last line printed was a solitary line printed
-as part of displaying a stack frame (@pxref{Stack, ,Examining the
-Stack}), this prints lines centered around that line.
-
-@item list -
-Print lines just before the lines last printed.
-@end table
-
-By default, GDB prints ten source lines with any of these forms of
-the @code{list} command.  You can change this using @code{set listsize}:
-
-@table @code
-@item set listsize @var{count}
-@kindex set listsize
-Make the @code{list} command display @var{count} source lines (unless
-the @code{list} argument explicitly specifies some other number).
-
-@item show listsize
-@kindex show listsize
-Display the number of lines that @code{list} will currently display by
-default.
-@end table
-
-Repeating a @code{list} command with @key{RET} discards the argument,
-so it is equivalent to typing just @code{list}.  This is more useful
-than listing the same lines again.  An exception is made for an
-argument of @samp{-}; that argument is preserved in repetition so that
-each repetition moves up in the source file.
-
-@cindex linespec
-In general, the @code{list} command expects you to supply zero, one or two
-@dfn{linespecs}.  Linespecs specify source lines; there are several ways
-of writing them but the effect is always to specify some source line.
-Here is a complete description of the possible arguments for @code{list}:
-
-@table @code
-@item list @var{linespec}
-Print lines centered around the line specified by @var{linespec}.
-
-@item list @var{first},@var{last}
-Print lines from @var{first} to @var{last}.  Both arguments are
-linespecs.
-
-@item list ,@var{last}
-Print lines ending with @var{last}.
-
-@item list @var{first},
-Print lines starting with @var{first}.
-
-@item list +
-Print lines just after the lines last printed.
-
-@item list -
-Print lines just before the lines last printed.
-
-@item list
-As described in the preceding table.
-@end table
-
-Here are the ways of specifying a single source line---all the
-kinds of linespec.
-
-@table @code
-@item @var{number}
-Specifies line @var{number} of the current source file.
-When a @code{list} command has two linespecs, this refers to
-the same source file as the first linespec.
-
-@item +@var{offset}
-Specifies the line @var{offset} lines after the last line printed.
-When used as the second linespec in a @code{list} command that has
-two, this specifies the line @var{offset} lines down from the
-first linespec.
-
-@item -@var{offset}
-Specifies the line @var{offset} lines before the last line printed.
-
-@item @var{filename}:@var{number}
-Specifies line @var{number} in the source file @var{filename}.
-
-@item @var{function}
-@c FIXME: "of the open-brace" is C-centric.  When we add other langs...
-Specifies the line of the open-brace that begins the body of the
-function @var{function}.
-
-@item @var{filename}:@var{function}
-Specifies the line of the open-brace that begins the body of the
-function @var{function} in the file @var{filename}.  You only need the
-file name with a function name to avoid ambiguity when there are
-identically named functions in different source files.
-
-@item *@var{address}
-Specifies the line containing the program address @var{address}.
-@var{address} may be any expression.
-@end table
-
-@node Search, Source Path, List, Source
-@section Searching Source Files
-@cindex searching
-@kindex reverse-search
-
-There are two commands for searching through the current source file for a
-regular expression.
-
-@table @code
-@item forward-search @var{regexp}
-@itemx search @var{regexp}
-@kindex search
-@kindex forward-search
-The command @samp{forward-search @var{regexp}} checks each line,
-starting with the one following the last line listed, for a match for
-@var{regexp}.  It lists the line that is found.  You can use
-synonym @samp{search @var{regexp}} or abbreviate the command name as
-@code{fo}.
-
-@item reverse-search @var{regexp}
-The command @samp{reverse-search @var{regexp}} checks each line, starting
-with the one before the last line listed and going backward, for a match
-for @var{regexp}.  It lists the line that is found.  You can abbreviate
-this command as @code{rev}.
-@end table
-
-@node Source Path, Machine Code, Search, Source
-@section Specifying Source Directories
-
-@cindex source path
-@cindex directories for source files
-Executable programs sometimes do not record the directories of the source
-files from which they were compiled, just the names.  Even when they do,
-the directories could be moved between the compilation and your debugging
-session.  GDB has a list of directories to search for source files;
-this is called the @dfn{source path}.  Each time GDB wants a source file,
-it tries all the directories in the list, in the order they are present
-in the list, until it finds a file with the desired name.  Note that
-the executable search path is @emph{not} used for this purpose.  Neither is
-the current working directory, unless it happens to be in the source
-path.
-
-If GDB cannot find a source file in the source path, and the object
-program records a directory, GDB tries that directory too.  If the
-source path is empty, and there is no record of the compilation
-directory, GDB will, as a last resort, look in the current
-directory.
-
-Whenever you reset or rearrange the source path, GDB will clear out
-any information it has cached about where source files are found, where
-each line is in the file, etc.
-
-@kindex directory
-When you start GDB, its source path is empty.
-To add other directories, use the @code{directory} command.
-
-@table @code
-@item directory @var{dirname} @dots{}
-Add directory @var{dirname} to the front of the source path.  Several
-directory names may be given to this command, separated by @samp{:} or
-whitespace.  You may specify a directory that is already in the source
-path; this moves it forward, so it will be searched sooner.
-
-You can use the string @samp{$cdir} to refer to the compilation
-directory (if one is recorded), and @samp{$cwd} to refer to the current
-working directory.  @samp{$cwd} is not the same as @samp{.}---the former
-tracks the current working directory as it changes during your GDB
-session, while the latter is immediately expanded to the current
-directory at the time you add an entry to the source path.
-
-@item directory
-Reset the source path to empty again.  This requires confirmation.
-
-@c RET-repeat for @code{directory} is explicitly disabled, but since
-@c repeating it would be a no-op we do not say that.  (thanks to RMS)
-
-@item show directories
-@kindex show directories
-Print the source path: show which directories it contains.
-@end table
-
-If your source path is cluttered with directories that are no longer of
-interest, GDB may sometimes cause confusion by finding the wrong
-versions of source.  You can correct the situation as follows:
-
-@enumerate
-@item
-Use @code{directory} with no argument to reset the source path to empty.
-
-@item
-Use @code{directory} with suitable arguments to reinstall the
-directories you want in the source path.  You can add all the
-directories in one command.
-@end enumerate
-
-@node Machine Code,  , Source Path, Source
-@section Source and Machine Code
-
-You can use the command @code{info line} to map source lines to program
-addresses (and viceversa), and the command @code{disassemble} to display
-a range of addresses as machine instructions.
-
-@table @code
-@item info line @var{linespec}
-@kindex info line
-Print the starting and ending addresses of the compiled code for
-source line @var{linespec}.  You can specify source lines in any of
-the ways understood by the @code{list} command (@pxref{List, ,Printing
-Source Lines}).
-@end table
-
-For example, we can use @code{info line} to discover the location of
-the object code for the first line of function
-@code{m4_changequote}:
-
-@smallexample
-(gdb) info line m4_changecom
-Line 895 of "builtin.c" starts at pc 0x634c and ends at 0x6350.
-@end smallexample
-
-@noindent
-We can also inquire (using @code{*@var{addr}} as the form for
-@var{linespec}) what source line covers a particular address:
-@smallexample
-(gdb) info line *0x63ff
-Line 926 of "builtin.c" starts at pc 0x63e4 and ends at 0x6404.
-@end smallexample
-
-@cindex @code{$_} and @code{info line}
-After @code{info line}, the default address for the @code{x} command
-is changed to the starting address of the line, so that @samp{x/i} is
-sufficient to begin examining the machine code (@pxref{Memory,
-,Examining Memory}).  Also, this address is saved as the value of the
-convenience variable @code{$_} (@pxref{Convenience Vars, ,Convenience
-Variables}).
-
-@table @code
-@kindex disassemble
-@item disassemble
-This specialized command dumps a range of memory as machine
-instructions.  The default memory range is the function surrounding the
-program counter of the selected frame.  A single argument to this
-command is a program counter value; the function surrounding this value
-will be dumped.  Two arguments specify a range of addresses (first
-inclusive, second exclusive) to dump.
-@end table
-
-We can use @code{disassemble} to inspect the object code
-range shown in the last @code{info line} example:
-
-@smallexample
-(gdb) disas 0x63e4 0x6404
-Dump of assembler code from 0x63e4 to 0x6404:
-0x63e4 builtin_init+5340:     ble 0x63f8 builtin_init+5360
-0x63e8 builtin_init+5344:     sethi %hi(0x4c00), %o0
-0x63ec builtin_init+5348:     ld [%i1+4], %o0
-0x63f0 builtin_init+5352:     b 0x63fc builtin_init+5364
-0x63f4 builtin_init+5356:     ld [%o0+4], %o0
-0x63f8 builtin_init+5360:     or %o0, 0x1a4, %o0
-0x63fc builtin_init+5364:     call 0x9288 path_search
-0x6400 builtin_init+5368:     nop
-End of assembler dump.
-@end smallexample
-
-@node Data, Languages, Source, Top
-@chapter Examining Data
-
-@cindex printing data
-@cindex examining data
-@kindex print
-@kindex inspect
-@c "inspect" is not quite a synonym if you are using Epoch, which we do not
-@c document because it is nonstandard...  Under Epoch it displays in a
-@c different window or something like that.
-The usual way to examine data in your program is with the @code{print}
-command (abbreviated @code{p}), or its synonym @code{inspect}.  It
-evaluates and prints the value of an expression of the language your
-program is written in (@pxref{Languages, ,Using GDB with Different
-Languages}).  
-
-@table @code
-@item print @var{exp}
-@itemx print /@var{f} @var{exp}
-@var{exp} is an expression (in the source language).  By default
-the value of @var{exp} is printed in a format appropriate to its data
-type; you can choose a different format by specifying @samp{/@var{f}},
-where @var{f} is a letter specifying the format; @pxref{Output formats}.
-
-@item print
-@itemx print /@var{f}
-If you omit @var{exp}, GDB displays the last value again (from the
-@dfn{value history}; @pxref{Value History, ,Value History}).  This allows you to
-conveniently inspect the same value in an alternative format.
-@end table
-
-A more low-level way of examining data is with the @code{x} command.
-It examines data in memory at a specified address and prints it in a
-specified format.  @xref{Memory, ,Examining Memory}.
-
-If you are interested in information about types, or about how the fields
-of a struct or class are declared, use the @code{ptype @var{exp}}
-command rather than @code{print}. @xref{Symbols, ,Examining the Symbol Table}.
-
-@menu
-* Expressions::                 Expressions
-* Variables::                   Program Variables
-* Arrays::                      Artificial Arrays
-* Output formats::              Output formats
-* Memory::                      Examining Memory
-* Auto Display::                Automatic Display
-* Print Settings::              Print Settings
-* Value History::               Value History
-* Convenience Vars::            Convenience Variables
-* Registers::                   Registers
-* Floating Point Hardware::     Floating Point Hardware
-@end menu
-
-@node Expressions, Variables, Data, Data
-@section Expressions
-
-@cindex expressions
-@code{print} and many other GDB commands accept an expression and
-compute its value.  Any kind of constant, variable or operator defined
-by the programming language you are using is legal in an expression in
-GDB.  This includes conditional expressions, function calls, casts
-and string constants.  It unfortunately does not include symbols defined
-by preprocessor @code{#define} commands.
-
-Because C is so widespread, most of the expressions shown in examples in
-this manual are in C.  @xref{Languages, , Using GDB with Different
-Languages}, for information on how to use expressions in other
-languages.
-
-In this section, we discuss operators that you can use in GDB
-expressions regardless of your programming language.
-
-Casts are supported in all languages, not just in C, because it is so
-useful to cast a number into a pointer so as to examine a structure
-at that address in memory.
-@c FIXME: casts supported---Mod2 true?
-
-GDB supports these operators in addition to those of programming
-languages:
-
-@table @code
-@item @@
-@samp{@@} is a binary operator for treating parts of memory as arrays.
-@xref{Arrays, ,Artificial Arrays}, for more information.
-
-@item ::
-@samp{::} allows you to specify a variable in terms of the file or
-function where it is defined.  @xref{Variables, ,Program Variables}.
-
-@item @{@var{type}@} @var{addr}
-Refers to an object of type @var{type} stored at address @var{addr} in
-memory.  @var{addr} may be any expression whose value is an integer or
-pointer (but parentheses are required around binary operators, just as in
-a cast).  This construct is allowed regardless of what kind of data is
-normally supposed to reside at @var{addr}.
-@end table
-
-@node Variables, Arrays, Expressions, Data
-@section Program Variables
-
-The most common kind of expression to use is the name of a variable
-in your program.
-
-Variables in expressions are understood in the selected stack frame
-(@pxref{Selection, ,Selecting a Frame}); they must either be global
-(or static) or be visible according to the scope rules of the
-programming language from the point of execution in that frame.  This
-means that in the function
-
-@example
-foo (a)
-     int a;
-@{
-  bar (a);
-  @{
-    int b = test ();
-    bar (b);
-  @}
-@}
-@end example
-
-@noindent
-the variable @code{a} is usable whenever your program is executing
-within the function @code{foo}, but the variable @code{b} is visible
-only while your program is executing inside the block in which @code{b}
-is declared.
-
-@cindex variable name conflict
-There is an exception: you can refer to a variable or function whose
-scope is a single source file even if the current execution point is not
-in this file.  But it is possible to have more than one such variable or
-function with the same name (in different source files).  If that happens,
-referring to that name has unpredictable effects.  If you wish, you can
-specify a variable in a particular file, using the colon-colon notation:
-
-@cindex colon-colon
-@iftex
-@c info cannot cope with a :: index entry, but why deprive hard copy readers?
-@kindex ::
-@end iftex
-@example
-@var{file}::@var{variable}
-@end example
-
-@noindent
-Here @var{file} is the name of the source file whose variable you want.
-
-@cindex C++ scope resolution
-This use of @samp{::} is very rarely in conflict with the very similar
-use of the same notation in C++.  GDB also supports use of the C++
-scope resolution operator in GDB expressions.
-
-@cindex wrong values
-@cindex variable values, wrong
-@quotation
-@emph{Warning:} Occasionally, a local variable may appear to have the
-wrong value at certain points in a function---just after entry to the
-function, and just before exit.  You may see this problem when you are
-stepping by machine instructions.  This is because on most machines, it
-takes more than one instruction to set up a stack frame (including local
-variable definitions); if you are stepping by machine instructions,
-variables may appear to have the wrong values until the stack frame is
-completely built.  On function exit, it usually also takes more than one
-machine instruction to destroy a stack frame; after you begin stepping
-through that group of instructions, local variable definitions may be
-gone.
-@end quotation
-
-@node Arrays, Output formats, Variables, Data
-@section Artificial Arrays
-
-@cindex artificial array
-@kindex @@
-It is often useful to print out several successive objects of the
-same type in memory; a section of an array, or an array of
-dynamically determined size for which only a pointer exists in the
-program.
-
-This can be done by constructing an @dfn{artificial array} with the
-binary operator @samp{@@}.  The left operand of @samp{@@} should be
-the first element of the desired array, as an individual object.
-The right operand should be the desired length of the array.  The result is
-an array value whose elements are all of the type of the left argument.
-The first element is actually the left argument; the second element
-comes from bytes of memory immediately following those that hold the
-first element, and so on.  Here is an example.  If a program says
-
-@example
-int *array = (int *) malloc (len * sizeof (int));
-@end example
-
-@noindent
-you can print the contents of @code{array} with
-
-@example
-p *array@@len
-@end example
-
-The left operand of @samp{@@} must reside in memory.  Array values made
-with @samp{@@} in this way behave just like other arrays in terms of
-subscripting, and are coerced to pointers when used in expressions.
-Artificial arrays most often appear in expressions via the value history
-(@pxref{Value History, ,Value History}), after printing one out.)
-
-Sometimes the artificial array mechanism is not quite enough; in
-moderately complex data structures, the elements of interest may not
-actually be adjacent---for example, if you are interested in the values
-of pointers in an array.  One useful work-around in this situation is
-to use a convenience variable (@pxref{Convenience Vars, ,Convenience
-Variables}) as a counter in an expression that prints the first
-interesting value, and then repeat that expression via @key{RET}.  For
-instance, suppose you have an array @code{dtab} of pointers to
-structures, and you are interested in the values of a field @code{fv}
-in each structure.  Here is an example of what you might type:
-
-@example
-set $i = 0
-p dtab[$i++]->fv
-@key{RET}
-@key{RET}
-@dots{}
-@end example
-
-@node Output formats, Memory, Arrays, Data
-@section Output formats
-
-@cindex formatted output
-@cindex output formats
-By default, GDB prints a value according to its data type.  Sometimes
-this is not what you want.  For example, you might want to print a number
-in hex, or a pointer in decimal.  Or you might want to view data in memory
-at a certain address as a character string or as an instruction.  To do
-these things, specify an @dfn{output format} when you print a value.
-
-The simplest use of output formats is to say how to print a value
-already computed.  This is done by starting the arguments of the
-@code{print} command with a slash and a format letter.  The format
-letters supported are:
-
-@table @code
-@item x
-Regard the bits of the value as an integer, and print the integer in
-hexadecimal.
-
-@item d
-Print as integer in signed decimal.
-
-@item u
-Print as integer in unsigned decimal.
-
-@item o
-Print as integer in octal.
-
-@item t
-Print as integer in binary.  The letter @samp{t} stands for ``two''.
-
-@item a
-Print as an address, both absolute in hex and as an offset from the
-nearest preceding symbol.  This format can be used to discover where (in
-what function) an unknown address is located:
-
-@example
-(gdb) p/a 0x54320
-$3 = 0x54320 <_initialize_vx+396>
-@end example
-
-@item c
-Regard as an integer and print it as a character constant.
-
-@item f
-Regard the bits of the value as a floating point number and print
-using typical floating point syntax.
-@end table
-
-For example, to print the program counter in hex (@pxref{Registers}), type
-
-@example
-p/x $pc
-@end example
-
-@noindent
-Note that no space is required before the slash; this is because command
-names in GDB cannot contain a slash.
-
-To reprint the last value in the value history with a different format,
-you can use the @code{print} command with just a format and no
-expression.  For example, @samp{p/x} reprints the last value in hex.
-
-@node Memory, Auto Display, Output formats, Data
-@section Examining Memory
-
-You can use the command @code{x} (for ``examine'') to examine memory in
-any of several formats, independently of your program's data types.
-
-@cindex examining memory
-@table @code
-@kindex x
-@item x/@var{nfu} @var{addr}
-@itemx x @var{addr}
-@itemx x
-Use the command @code{x} to examine memory.
-@end table
-
-@var{n}, @var{f}, and @var{u} are all optional parameters that specify how
-much memory to display and how to format it; @var{addr} is an
-expression giving the address where you want to start displaying memory.
-If you use defaults for @var{nfu}, you need not type the slash @samp{/}.
-Several commands set convenient defaults for @var{addr}.
-
-@table @r
-@item @var{n}, the repeat count
-The repeat count is a decimal integer; the default is 1.  It specifies
-how much memory (counting by units @var{u}) to display.
-@c This really is **decimal**; unaffected by 'set radix' as of GDB
-@c 4.1.2.
-
-@item @var{f}, the display format
-The display format is one of the formats used by @code{print},
-or @samp{s} (null-terminated string) or @samp{i} (machine instruction).
-The default is @samp{x} (hexadecimal) initially, or the format from the
-last time you used either @code{x} or @code{print}.
-
-@item @var{u}, the unit size
-The unit size is any of
-@table @code
-@item b
-Bytes.
-@item h
-Halfwords (two bytes).
-@item w
-Words (four bytes).  This is the initial default.
-@item g
-Giant words (eight bytes).
-@end table
-
-Each time you specify a unit size with @code{x}, that size becomes the
-default unit the next time you use @code{x}.  (For the @samp{s} and
-@samp{i} formats, the unit size is ignored and is normally not written.)
-
-@item @var{addr}, starting display address
-@var{addr} is the address where you want GDB to begin displaying
-memory.  The expression need not have a pointer value (though it may);
-it is always interpreted as an integer address of a byte of memory.
-@xref{Expressions, ,Expressions}, for more information on expressions.  The default for
-@var{addr} is usually just after the last address examined---but several
-other commands also set the default address: @code{info breakpoints} (to
-the address of the last breakpoint listed), @code{info line} (to the
-starting address of a line), and @code{print} (if you use it to display
-a value from memory).
-@end table
-
-For example, @samp{x/3uh 0x54320} is a request to display three halfwords
-(@code{h}) of memory, formatted as unsigned decimal integers (@samp{u}),
-starting at address @code{0x54320}.  @samp{x/4xw $sp} prints the four
-words (@samp{w}) of memory above the stack pointer (here, @samp{$sp};
-@pxref{Registers}) in hexadecimal (@samp{x}).
-
-Since the letters indicating unit sizes are all distinct from the
-letters specifying output formats, you do not have to remember whether
-unit size or format comes first; either order will work.  The output
-specifications @samp{4xw} and @samp{4wx} mean exactly the same thing.
-(However, the count @var{n} must come first; @samp{wx4} will not work.)
-
-Even though the unit size @var{u} is ignored for the formats @samp{s}
-and @samp{i}, you might still want to use a count @var{n}; for example,
-@samp{3i} specifies that you want to see three machine instructions,
-including any operands.  The command @code{disassemble} gives an
-alternative way of inspecting machine instructions; @pxref{Machine
-Code}.
-
-All the defaults for the arguments to @code{x} are designed to make it
-easy to continue scanning memory with minimal specifications each time
-you use @code{x}.  For example, after you have inspected three machine
-instructions with @samp{x/3i @var{addr}}, you can inspect the next seven
-with just @samp{x/7}.  If you use @key{RET} to repeat the @code{x} command,
-the repeat count @var{n} is used again; the other arguments default as
-for successive uses of @code{x}.
-
-@cindex @code{$_}, @code{$__}, and value history
-The addresses and contents printed by the @code{x} command are not saved
-in the value history because there is often too much of them and they
-would get in the way.  Instead, GDB makes these values available for
-subsequent use in expressions as values of the convenience variables
-@code{$_} and @code{$__}.  After an @code{x} command, the last address
-examined is available for use in expressions in the convenience variable
-@code{$_}.  The contents of that address, as examined, are available in
-the convenience variable @code{$__}.
-
-If the @code{x} command has a repeat count, the address and contents saved
-are from the last memory unit printed; this is not the same as the last
-address printed if several units were printed on the last line of output.
-
-@node Auto Display, Print Settings, Memory, Data
-@section Automatic Display
-@cindex automatic display
-@cindex display of expressions
-
-If you find that you want to print the value of an expression frequently
-(to see how it changes), you might want to add it to the @dfn{automatic
-display list} so that GDB will print its value each time your program stops.
-Each expression added to the list is given a number to identify it;
-to remove an expression from the list, you specify that number.
-The automatic display looks like this:
-
-@example
-2: foo = 38
-3: bar[5] = (struct hack *) 0x3804
-@end example
-
-@noindent
-showing item numbers, expressions and their current values.  As with
-displays you request manually using @code{x} or @code{print}, you can
-specify the output format you prefer; in fact, @code{display} decides
-whether to use @code{print} or @code{x} depending on how elaborate your
-format specification is---it uses @code{x} if you specify a unit size,
-or one of the two formats (@samp{i} and @samp{s}) that are only
-supported by @code{x}; otherwise it uses @code{print}.
-
-@table @code
-@item display @var{exp}
-@kindex display
-Add the expression @var{exp} to the list of expressions to display
-each time your program stops.  @xref{Expressions, ,Expressions}.
-
-@code{display} will not repeat if you press @key{RET} again after using it.
-
-@item display/@var{fmt} @var{exp}
-For @var{fmt} specifying only a display format and not a size or
-count, add the expression @var{exp} to the auto-display list but
-arranges to display it each time in the specified format @var{fmt}.
-@xref{Output formats}.
-
-@item display/@var{fmt} @var{addr}
-For @var{fmt} @samp{i} or @samp{s}, or including a unit-size or a
-number of units, add the expression @var{addr} as a memory address to
-be examined each time your program stops.  Examining means in effect
-doing @samp{x/@var{fmt} @var{addr}}.  @xref{Memory, ,Examining Memory}.
-@end table
-
-For example, @samp{display/i $pc} can be helpful, to see the machine
-instruction about to be executed each time execution stops (@samp{$pc}
-is a common name for the program counter; @pxref{Registers}).
-
-@table @code
-@item undisplay @var{dnums}@dots{}
-@itemx delete display @var{dnums}@dots{}
-@kindex delete display
-@kindex undisplay
-Remove item numbers @var{dnums} from the list of expressions to display.
-
-@code{undisplay} will not repeat if you press @key{RET} after using it.
-(Otherwise you would just get the error @samp{No display number @dots{}}.)
-
-@item disable display @var{dnums}@dots{}
-@kindex disable display
-Disable the display of item numbers @var{dnums}.  A disabled display
-item is not printed automatically, but is not forgotten.  It may be
-enabled again later.
-
-@item enable display @var{dnums}@dots{}
-@kindex enable display
-Enable display of item numbers @var{dnums}.  It becomes effective once
-again in auto display of its expression, until you specify otherwise.
-
-@item display
-Display the current values of the expressions on the list, just as is
-done when your program stops.
-
-@item info display
-@kindex info display
-Print the list of expressions previously set up to display
-automatically, each one with its item number, but without showing the
-values.  This includes disabled expressions, which are marked as such.
-It also includes expressions which would not be displayed right now
-because they refer to automatic variables not currently available.
-@end table
-
-If a display expression refers to local variables, then it does not make
-sense outside the lexical context for which it was set up.  Such an
-expression is disabled when execution enters a context where one of its
-variables is not defined.  For example, if you give the command
-@code{display last_char} while inside a function with an argument
-@code{last_char}, then this argument will be displayed while your program
-continues to stop inside that function.  When it stops elsewhere---where
-there is no variable @code{last_char}---display is disabled.  The next time
-your program stops where @code{last_char} is meaningful, you can enable the
-display expression once again.
-
-@node Print Settings, Value History, Auto Display, Data
-@section Print Settings
-
-@cindex format options
-@cindex print settings
-GDB provides the following ways to control how arrays, structures,
-and symbols are printed.
-
-@noindent
-These settings are useful for debugging programs in any language:
-
-@table @code
-@item set print address
-@item set print address on
-@kindex set print address
-GDB will print memory addresses showing the location of stack
-traces, structure values, pointer values, breakpoints, and so forth,
-even when it also displays the contents of those addresses.  The default
-is on.  For example, this is what a stack frame display looks like, with
-@code{set print address on}:
-
-@smallexample
-@group
-(gdb) f
-#0  set_quotes (lq=0x34c78 "<<", rq=0x34c88 ">>")
-    at input.c:530
-530         if (lquote != def_lquote)
-@end group
-@end smallexample
-
-@item set print address off
-Do not print addresses when displaying their contents.  For example,
-this is the same stack frame displayed with @code{set print address off}:
-
-@example
-@group
-(gdb) set print addr off
-(gdb) f
-#0  set_quotes (lq="<<", rq=">>") at input.c:530
-530         if (lquote != def_lquote)
-@end group
-@end example
-
-@item show print address
-@kindex show print address
-Show whether or not addresses are to be printed.
-
-@item set print array
-@itemx set print array on
-@kindex set print array
-GDB will pretty print arrays.  This format is more convenient to read,
-but uses more space.  The default is off.
-
-@item set print array off.
-Return to compressed format for arrays.
-
-@item show print array
-@kindex show print array
-Show whether compressed or pretty format is selected for displaying
-arrays.
-
-@item set print elements @var{number-of-elements}
-@kindex set print elements
-If GDB is printing a large array, it will stop printing after it has
-printed the number of elements set by the @code{set print elements} command.
-This limit also applies to the display of strings.
-
-@item show print elements
-@kindex show print elements
-Display the number of elements of a large array that GDB will print
-before losing patience.
-
-@item set print pretty on
-@kindex set print pretty
-Cause GDB to print structures in an indented format with one member per
-line, like this:
-
-@example
-@group
-$1 = @{
-  next = 0x0,
-  flags = @{
-    sweet = 1,
-    sour = 1
-  @},
-  meat = 0x54 "Pork"
-@}
-@end group
-@end example
-
-@item set print pretty off
-Cause GDB to print structures in a compact format, like this:
-
-@smallexample
-@group
-$1 = @{next = 0x0, flags = @{sweet = 1, sour = 1@}, meat \
-= 0x54 "Pork"@}
-@end group
-@end smallexample
-
-@noindent
-This is the default format.
-
-@item show print pretty
-@kindex show print pretty
-Show which format GDB will use to print structures.
-
-@item set print sevenbit-strings on
-@kindex set print sevenbit-strings
-Print using only seven-bit characters; if this option is set,
-GDB will display any eight-bit characters (in strings or character
-values) using the notation @code{\}@var{nnn}.  For example, @kbd{M-a} is
-displayed as @code{\341}.
-
-@item set print sevenbit-strings off
-Print using either seven-bit or eight-bit characters, as required.  This
-is the default.
-
-@item show print sevenbit-strings
-@kindex show print sevenbit-strings
-Show whether or not GDB will print only seven-bit characters.
-
-@item set print union on
-@kindex set print union
-Tell GDB to print unions which are contained in structures.  This is the
-default setting.
-
-@item set print union off
-Tell GDB not to print unions which are contained in structures.
-
-@item show print union
-@kindex show print union
-Ask GDB whether or not it will print unions which are contained in
-structures.
-
-For example, given the declarations
-
-@smallexample
-typedef enum @{Tree, Bug@} Species;
-typedef enum @{Big_tree, Acorn, Seedling@} Tree_forms;
-typedef enum @{Caterpillar, Cocoon, Butterfly@} 
-              Bug_forms;
-
-struct thing @{
-  Species it;
-  union @{
-    Tree_forms tree;
-    Bug_forms bug;
-  @} form;
-@};
-
-struct thing foo = @{Tree, @{Acorn@}@};
-@end smallexample
-
-@noindent
-with @code{set print union on} in effect @samp{p foo} would print
-
-@smallexample
-$1 = @{it = Tree, form = @{tree = Acorn, bug = Cocoon@}@}
-@end smallexample
-
-@noindent
-and with @code{set print union off} in effect it would print
-
-@smallexample
-$1 = @{it = Tree, form = @{...@}@}
-@end smallexample
-@end table
-
-@noindent
-These settings are of interest when debugging C++ programs:
-
-@table @code
-@item set print demangle
-@itemx set print demangle on
-@kindex set print demangle
-Print C++ names in their source form rather than in the mangled form
-in which they are passed to the assembler and linker for type-safe linkage.
-The default is on.
-
-@item show print demangle
-@kindex show print demangle
-Show whether C++ names will be printed in mangled or demangled form.
-
-@item set print asm-demangle
-@itemx set print asm-demangle on
-@kindex set print asm-demangle
-Print C++ names in their source form rather than their mangled form, even
-in assembler code printouts such as instruction disassemblies.
-The default is off.
-
-@item show print asm-demangle
-@kindex show print asm-demangle
-Show whether C++ names in assembly listings will be printed in mangled
-or demangled form.
-
-@item set print object
-@itemx set print object on
-@kindex set print object
-When displaying a pointer to an object, identify the @emph{actual}
-(derived) type of the object rather than the @emph{declared} type, using
-the virtual function table.
-
-@item set print object off
-Display only the declared type of objects, without reference to the
-virtual function table.  This is the default setting.
-
-@item show print object
-@kindex show print object
-Show whether actual, or declared, object types will be displayed.
-
-@item set print vtbl
-@itemx set print vtbl on
-@kindex set print vtbl
-Pretty print C++ virtual function tables.  The default is off.
-
-@item set print vtbl off
-Do not pretty print C++ virtual function tables.
-
-@item show print vtbl
-@kindex show print vtbl
-Show whether C++ virtual function tables are pretty printed, or not.
-@end table
-
-@node Value History, Convenience Vars, Print Settings, Data
-@section Value History
-
-@cindex value history
-Values printed by the @code{print} command are saved in GDB's @dfn{value
-history} so that you can refer to them in other expressions.  Values are
-kept until the symbol table is re-read or discarded (for example with
-the @code{file} or @code{symbol-file} commands).  When the symbol table
-changes, the value history is discarded, since the values may contain
-pointers back to the types defined in the symbol table.
-
-@cindex @code{$}
-@cindex @code{$$}
-@cindex history number
-The values printed are given @dfn{history numbers} for you to refer to them
-by.  These are successive integers starting with one.  @code{print} shows you
-the history number assigned to a value by printing @samp{$@var{num} = }
-before the value; here @var{num} is the history number.
-
-To refer to any previous value, use @samp{$} followed by the value's
-history number.  The way @code{print} labels its output is designed to
-remind you of this.  Just @code{$} refers to the most recent value in
-the history, and @code{$$} refers to the value before that.
-@code{$$@var{n}} refers to the @var{n}th value from the end; @code{$$2}
-is the value just prior to @code{$$}, @code{$$1} is equivalent to
-@code{$$}, and @code{$$0} is equivalent to @code{$}.
-
-For example, suppose you have just printed a pointer to a structure and
-want to see the contents of the structure.  It suffices to type
-
-@example
-p *$
-@end example
-
-If you have a chain of structures where the component @code{next} points
-to the next one, you can print the contents of the next one with this:
-
-@example
-p *$.next
-@end example
-
-@noindent
-You can print successive links in the chain by repeating this
-command---which you can do by just typing @key{RET}.
-
-Note that the history records values, not expressions.  If the value of
-@code{x} is 4 and you type these commands:
-
-@example
-print x
-set x=5
-@end example
-
-@noindent
-then the value recorded in the value history by the @code{print} command
-remains 4 even though the value of @code{x} has changed.
-
-@table @code
-@kindex show values
-@item show values
-Print the last ten values in the value history, with their item numbers.
-This is like @samp{p@ $$9} repeated ten times, except that @code{show
-values} does not change the history.
-
-@item show values @var{n}
-Print ten history values centered on history item number @var{n}.
-
-@item show values +
-Print ten history values just after the values last printed.  If no more
-values are available, produces no display.
-@end table
-
-Pressing @key{RET} to repeat @code{show values @var{n}} has exactly the
-same effect as @samp{show values +}.
-
-@node Convenience Vars, Registers, Value History, Data
-@section Convenience Variables
-
-@cindex convenience variables
-GDB provides @dfn{convenience variables} that you can use within
-GDB to hold on to a value and refer to it later.  These variables
-exist entirely within GDB; they are not part of your program, and
-setting a convenience variable has no direct effect on further execution
-of your program.  That is why you can use them freely.
-
-Convenience variables are prefixed with @samp{$}.  Any name preceded by
-@samp{$} can be used for a convenience variable, unless it is one of
-the predefined machine-specific register names (@pxref{Registers}).
-(Value history references, in contrast, are @emph{numbers} preceded
-by @samp{$}.  @xref{Value History, ,Value History}.)
-
-You can save a value in a convenience variable with an assignment
-expression, just as you would set a variable in your program.  Example:
-
-@example
-set $foo = *object_ptr
-@end example
-
-@noindent
-would save in @code{$foo} the value contained in the object pointed to by
-@code{object_ptr}.
-
-Using a convenience variable for the first time creates it; but its value
-is @code{void} until you assign a new value.  You can alter the value with
-another assignment at any time.
-
-Convenience variables have no fixed types.  You can assign a convenience
-variable any type of value, including structures and arrays, even if
-that variable already has a value of a different type.  The convenience
-variable, when used as an expression, has the type of its current value.
-
-@table @code
-@item show convenience
-@kindex show convenience
-Print a list of convenience variables used so far, and their values.
-Abbreviated @code{show con}.
-@end table
-
-One of the ways to use a convenience variable is as a counter to be
-incremented or a pointer to be advanced.  For example, to print
-a field from successive elements of an array of structures:
-
-@example
-set $i = 0
-print bar[$i++]->contents
-@i{@dots{} repeat that command by typing @key{RET}.}
-@end example
-
-Some convenience variables are created automatically by GDB and given
-values likely to be useful.
-
-@table @code
-@item $_
-@kindex $_
-The variable @code{$_} is automatically set by the @code{x} command to
-the last address examined (@pxref{Memory, ,Examining Memory}).  Other
-commands which provide a default address for @code{x} to examine also
-set @code{$_} to that address; these commands include @code{info line}
-and @code{info breakpoint}.  The type of @code{$_} is @code{void *}
-except when set by the @code{x} command, in which case it is a pointer
-to the type of @code{$__}.
-
-@item $__
-@kindex $__
-The variable @code{$__} is automatically set by the @code{x} command
-to the value found in the last address examined.  Its type is chosen
-to match the format in which the data was printed.
-@end table
-
-@node Registers, Floating Point Hardware, Convenience Vars, Data
-@section Registers
-
-@cindex registers
-You can refer to machine register contents, in expressions, as variables
-with names starting with @samp{$}.  The names of registers are different
-for each machine; use @code{info registers} to see the names used on
-your machine.
-
-@table @code
-@item info registers
-@kindex info registers
-Print the names and values of all registers except floating-point
-registers (in the selected stack frame).
-
-@item info all-registers
-@kindex info all-registers
-@cindex floating point registers
-Print the names and values of all registers, including floating-point
-registers.
-
-@item info registers @var{regname}
-Print the relativized value of register @var{regname}.  @var{regname}
-may be any register name valid on the machine you are using, with
-or without the initial @samp{$}.
-@end table
-
-GDB has four ``standard'' register names that are available (in
-expressions) on most machines---whenever they do not conflict with an
-architecture's canonical mnemonics for registers.  The register names
-@code{$pc} and @code{$sp} are used for the program counter register and
-the stack pointer.  @code{$fp} is used for a register that contains a
-pointer to the current stack frame, and @code{$ps} is used for a
-register that contains the processor status.  For example,
-you could print the program counter in hex with
-
-@example
-p/x $pc
-@end example
-
-@noindent
-or print the instruction to be executed next with
-
-@example
-x/i $pc
-@end example
-
-@noindent
-or add four to the stack pointer @footnote{This is a way of removing
-one word from the stack, on machines where stacks grow downward in
-memory (most machines, nowadays).  This assumes that the innermost
-stack frame is selected; setting @code{$sp} is not allowed when other
-stack frames are selected.  To pop entire frames off the stack,
-regardless of machine architecture, use @code{return};
-@pxref{Returning, ,Returning from a Function}.} with
-
-@example
-set $sp += 4
-@end example
-
-Whenever possible, these four standard register names are available on
-your machine even though the machine has different canonical mnemonics,
-so long as there is no conflict.  The @code{info registers} command
-shows the canonical names.  For example, on the SPARC, @code{info
-registers} displays the processor status register as @code{$psr} but you
-can also refer to it as @code{$ps}.
-
-GDB always considers the contents of an ordinary register as an
-integer when the register is examined in this way.  Some machines have
-special registers which can hold nothing but floating point; these
-registers are considered to have floating point values.  There is no way
-to refer to the contents of an ordinary register as floating point value
-(although you can @emph{print} it as a floating point value with
-@samp{print/f $@var{regname}}).
-
-Some registers have distinct ``raw'' and ``virtual'' data formats.  This
-means that the data format in which the register contents are saved by
-the operating system is not the same one that your program normally
-sees.  For example, the registers of the 68881 floating point
-coprocessor are always saved in ``extended'' (raw) format, but all C
-programs expect to work with ``double'' (virtual) format.  In such
-cases, GDB normally works with the virtual format only (the format that
-makes sense for your program), but the @code{info registers} command
-prints the data in both formats.
-
-Normally, register values are relative to the selected stack frame
-(@pxref{Selection, ,Selecting a Frame}).  This means that you get the
-value that the register would contain if all stack frames farther in
-were exited and their saved registers restored.  In order to see the
-true contents of hardware registers, you must select the innermost
-frame (with @samp{frame 0}).
-
-However, GDB must deduce where registers are saved, from the machine
-code generated by your compiler.  If some registers are not saved, or if
-GDB is unable to locate the saved registers, the selected stack
-frame will make no difference.
-
-@node Floating Point Hardware,  , Registers, Data
-@section Floating Point Hardware
-@cindex floating point
-
-Depending on the host machine architecture, GDB may be able to give
-you more information about the status of the floating point hardware.
-
-@table @code
-@item info float
-@kindex info float
-If available, provides hardware-dependent information about the floating
-point unit.  The exact contents and layout vary depending on the
-floating point chip.
-@end table
-@c FIXME: this is a cop-out.  Try to get examples, explanations.  Only
-@c FIXME...supported currently on arm's and 386's.  Mark properly with
-@c FIXME... m4 macros to isolate general statements from hardware-dep,
-@c FIXME... at that point.
-
-@node Languages, Symbols, Data, Top
-@chapter Using GDB with Different Languages
-@cindex languages
-
-Although programming languages generally have common aspects, they are
-rarely expressed in the same manner.  For instance, in ANSI C,
-dereferencing a pointer @code{p} is accomplished by @code{*p}, but in
-Modula-2, it is accomplished by @code{p^}.  Values can also be
-represented (and displayed) differently.  Hex numbers in C are written
-like @samp{0x1ae}, while in Modula-2 they appear as @samp{1AEH}.
-
-@cindex working language
-Language-specific information is built into GDB for some languages,
-allowing you to express operations like the above in your program's
-native language, and allowing GDB to output values in a manner
-consistent with the syntax of your program's native language.  The
-language you use to build expressions, called the @dfn{working
-language}, can be selected manually, or GDB can set it
-automatically.
-
-@menu
-* Setting::                     Switching between source languages
-* Show::                        Displaying the language
-* Checks::                      Type and Range checks
-* Support::                     Supported languages
-@end menu
-
-@node Setting, Show, Languages, Languages
-@section Switching between source languages
-
-There are two ways to control the working language---either have GDB
-set it automatically, or select it manually yourself.  You can use the
-@code{set language} command for either purpose.  On startup, GDB
-defaults to setting the language automatically.
-
-@menu
-* Manually::                    Setting the working language manually
-* Automatically::               Having GDB infer the source language
-@end menu
-
-@node Manually, Automatically, Setting, Setting
-@subsection Setting the working language
-
-@kindex set language
-To set the language, issue the command @samp{set language @var{lang}},
-where @var{lang} is the name of a language: @code{c} or @code{modula-2}.
-For a list of the supported languages, type @samp{set language}.
-
-Setting the language manually prevents GDB from updating the working
-language automatically.  This can lead to confusion if you try
-to debug a program when the working language is not the same as the
-source language, when an expression is acceptable to both
-languages---but means different things.  For instance, if the current
-source file were written in C, and GDB was parsing Modula-2, a
-command such as:
-
-@example
-print a = b + c
-@end example
-
-@noindent
-might not have the effect you intended.  In C, this means to add
-@code{b} and @code{c} and place the result in @code{a}.  The result
-printed would be the value of @code{a}.  In Modula-2, this means to compare
-@code{a} to the result of @code{b+c}, yielding a @code{BOOLEAN} value.
-
-If you allow GDB to set the language automatically, then
-you can count on expressions evaluating the same way in your debugging
-session and in your program.
-
-@node Automatically,  , Manually, Setting
-@subsection Having GDB infer the source language
-
-To have GDB set the working language automatically, use @samp{set
-language local} or @samp{set language auto}.  GDB then infers the
-language that a program was written in by looking at the name of its
-source files, and examining their extensions:
-
-@table @file
-@item *.mod
-Modula-2 source file
-
-@item *.c
-@itemx *.cc
-C or C++ source file.
-@end table
-
-This information is recorded for each function or procedure in a source
-file.  When your program stops in a frame (usually by encountering a
-breakpoint), GDB sets the working language to the language recorded
-for the function in that frame.  If the language for a frame is unknown
-(that is, if the function or block corresponding to the frame was
-defined in a source file that does not have a recognized extension), the
-current working language is not changed, and GDB issues a warning.
-
-This may not seem necessary for most programs, which are written
-entirely in one source language.  However, program modules and libraries
-written in one source language can be used by a main program written in
-a different source language.  Using @samp{set language auto} in this
-case frees you from having to set the working language manually.
-
-@node Show, Checks, Setting, Languages
-@section Displaying the language
-
-The following commands will help you find out which language is the
-working language, and also what language source files were written in.
-
-@kindex show language
-@kindex info frame
-@kindex info source
-@table @code
-@item show language
-Display the current working language.  This is the
-language you can use with commands such as @code{print} to
-build and compute expressions that may involve variables in your program.
-
-@item info frame
-Among the other information listed here (@pxref{Frame Info, ,Information
-about a Frame}) is the source language for this frame.  This is the
-language that will become the working language if you ever use an
-identifier that is in this frame.
-
-@item info source
-Among the other information listed here (@pxref{Symbols, ,Examining the
-Symbol Table}) is the source language of this source file.
-@end table
-
-@node Checks, Support, Show, Languages
-@section Type and range Checking
-
-@quotation
-@emph{Warning:} In this release, the GDB commands for type and range
-checking are included, but they do not yet have any effect.  This
-section documents the intended facilities.
-@end quotation
-@c FIXME remove warning when type/range code added
-
-Some languages are designed to guard you against making seemingly common
-errors through a series of compile- and run-time checks.  These include
-checking the type of arguments to functions and operators, and making
-sure mathematical overflows are caught at run time.  Checks such as
-these help to ensure a program's correctness once it has been compiled
-by eliminating type mismatches, and providing active checks for range
-errors when your program is running.
-
-GDB can check for conditions like the above if you wish.
-Although GDB will not check the statements in your program, it
-can check expressions entered directly into GDB for evaluation via
-the @code{print} command, for example.  As with the working language,
-GDB can also decide whether or not to check automatically based on
-your program's source language.  @xref{Support, ,Supported Languages},
-for the default settings of supported languages.
-
-@menu
-* Type Checking::               An overview of type checking
-* Range Checking::              An overview of range checking
-@end menu
-
-@cindex type checking
-@cindex checks, type
-@node Type Checking, Range Checking, Checks, Checks
-@subsection An overview of type checking
-
-Some languages, such as Modula-2, are strongly typed, meaning that the
-arguments to operators and functions have to be of the correct type,
-otherwise an error occurs.  These checks prevent type mismatch
-errors from ever causing any run-time problems.  For example,
-
-@example
-1 + 2 @result{} 3
-@exdent but
-@error{} 1 + 2.3
-@end example
-
-The second example fails because the @code{CARDINAL} 1 is not
-type-compatible with the @code{REAL} 2.3.
-
-For expressions you use in GDB commands, you can tell the GDB
-type checker to skip checking; to treat any mismatches as errors and
-abandon the expression; or only issue warnings when type mismatches
-occur, but evaluate the expression anyway.  When you choose the last of
-these, GDB evaluates expressions like the second example above, but
-also issues a warning.
-
-Even though you may turn type checking off, other type-based reasons may
-prevent GDB from evaluating an expression.  For instance, GDB does not
-know how to add an @code{int} and a @code{struct foo}.  These particular
-type errors have nothing to do with the language in use, and usually
-arise from expressions, such as the one described above, which make
-little sense to evaluate anyway.
-
-Each language defines to what degree it is strict about type.  For
-instance, both Modula-2 and C require the arguments to arithmetical
-operators to be numbers.  In C, enumerated types and pointers can be
-represented as numbers, so that they are valid arguments to mathematical
-operators.  @xref{Support, ,Supported Languages}, for further
-details on specific languages.
-
-GDB provides some additional commands for controlling the type checker:
-
-@kindex set check
-@kindex set check type
-@kindex show check type
-@table @code
-@item set check type auto
-Set type checking on or off based on the current working language.
-@xref{Support, ,Supported Languages}, for the default settings for
-each language.
-
-@item set check type on
-@itemx set check type off
-Set type checking on or off, overriding the default setting for the
-current working language.  Issue a warning if the setting does not
-match the language's default.  If any type mismatches occur in
-evaluating an expression while typechecking is on, GDB prints a
-message and aborts evaluation of the expression.
-
-@item set check type warn
-Cause the type checker to issue warnings, but to always attempt to
-evaluate the expression.  Evaluating the expression may still
-be impossible for other reasons.  For example, GDB cannot add
-numbers and structures.
-
-@item show type
-Show the current setting of the type checker, and whether or not GDB is
-setting it automatically.
-@end table
-
-@cindex range checking
-@cindex checks, range
-@node Range Checking,  , Type Checking, Checks
-@subsection An overview of Range Checking
-
-In some languages (such as Modula-2), it is an error to exceed the
-bounds of a type; this is enforced with run-time checks.  Such range
-checking is meant to ensure program correctness by making sure
-computations do not overflow, or indices on an array element access do
-not exceed the bounds of the array.
-
-For expressions you use in GDB commands, you can tell GDB to
-ignore range errors; to always treat them as errors and abandon the
-expression; or to issue warnings when a range error occurs but evaluate
-the expression anyway.
-
-A range error can result from numerical overflow, from exceeding an
-array index bound, or when you type in a constant that is not a member
-of any type.  Some languages, however, do not treat overflows as an
-error.  In many implementations of C, mathematical overflow causes the
-result to ``wrap around'' to lower values---for example, if @var{m} is
-the largest integer value, and @var{s} is the smallest, then
-
-@example
-@var{m} + 1 @result{} @var{s}
-@end example
-
-This, too, is specific to individual languages, and in some cases
-specific to individual compilers or machines.  @xref{Support, ,
-Supported Languages}, for further details on specific languages.
-
-GDB provides some additional commands for controlling the range checker:
-
-@kindex set check
-@kindex set check range
-@kindex show check range
-@table @code
-@item set check range auto
-Set range checking on or off based on the current working language.
-@xref{Support, ,Supported Languages}, for the default settings for
-each language.
-
-@item set check range on
-@itemx set check range off
-Set range checking on or off, overriding the default setting for the
-current working language.  A warning is issued if the setting does not
-match the language's default.  If a range error occurs, then a message
-is printed and evaluation of the expression is aborted.
-
-@item set check range warn
-Output messages when the GDB range checker detects a range error,
-but attempt to evaluate the expression anyway.  Evaluating the
-expression may still be impossible for other reasons, such as accessing
-memory that the process does not own (a typical example from many UNIX
-systems).
-
-@item show range
-Show the current setting of the range checker, and whether or not it is
-being set automatically by GDB.
-@end table
-
-@node Support,  , Checks, Languages
-@section Supported Languages
-
-GDB 4 supports C, C++, and Modula-2.  The syntax for C and C++ is so
-closely related that GDB does not distinguish the two.  Some GDB
-features may be used in expressions regardless of the language you
-use: the GDB @code{@@} and @code{::} operators, and the
-@samp{@{type@}addr} construct (@pxref{Expressions, ,Expressions}) can be
-used with the constructs of any of the supported languages.
-
-The following sections detail to what degree each of these
-source languages is supported by GDB.  These sections are
-not meant to be language tutorials or references, but serve only as a
-reference guide to what the GDB expression parser will accept, and
-what input and output formats should look like for different languages.
-There are many good books written on each of these languages; please
-look to these for a language reference or tutorial.
-
-@menu
-* C::                           C and C++
-* Modula-2::                    Modula-2
-@end menu
-
-@node C, Modula-2, Support, Support
-@subsection C and C++
-@cindex C and C++
-
-@cindex expressions in C or C++
-Since C and C++ are so closely related, GDB does not distinguish
-between them when interpreting the expressions recognized in GDB
-commands.
-
-@cindex C++
-@kindex g++
-@cindex GNU C++
-The C++ debugging facilities are jointly implemented by the GNU C++
-compiler and GDB.  Therefore, to debug your C++ code effectively,
-you must compile your C++ programs with the GNU C++ compiler,
-@code{g++}.
-
-@menu
-* C Operators::                 C and C++ Operators
-* C Constants::                 C and C++ Constants
-* Cplusplus expressions::       C++ Expressions
-* C Defaults::                  Default settings for C and C++
-* C Checks::                    C and C++ Type and Range Checks
-* Debugging C::                 GDB and C
-* Debugging C plus plus::       Special features for C++
-@end menu
-
-@cindex C and C++ operators
-@node C Operators, C Constants, C, C
-@subsubsection C and C++ Operators
-
-Operators must be defined on values of specific types.  For instance,
-@code{+} is defined on numbers, but not on structures.  Operators are
-often defined on groups of types.  For the purposes of C and C++, the
-following definitions hold:
-
-@itemize @bullet
-@item
-@emph{Integral types} include @code{int} with any of its storage-class
-specifiers, @code{char}, and @code{enum}s.
-
-@item
-@emph{Floating-point types} include @code{float} and @code{double}.
-
-@item
-@emph{Pointer types} include all types defined as @code{(@var{type}
-*)}.
-
-@item
-@emph{Scalar types} include all of the above.
-@end itemize
-
-@noindent
-The following operators are supported.  They are listed here
-in order of increasing precedence:
-
-@table @code
-@item ,
-The comma or sequencing operator.  Expressions in a comma-separated list
-are evaluated from left to right, with the result of the entire
-expression being the last expression evaluated.
-
-@item =
-Assignment.  The value of an assignment expression is the value
-assigned.  Defined on scalar types.
-
-@item @var{op}=
-Used in an expression of the form @w{@code{@var{a} @var{op}= @var{b}}},
-and translated to @w{@code{@var{a} = @var{a op b}}}.
-@w{@code{@var{op}=}} and @code{=} have the same precendence.
-@var{op} is any one of the operators @code{|}, @code{^}, @code{&},
-@code{<<}, @code{>>}, @code{+}, @code{-}, @code{*}, @code{/}, @code{%}.
-
-@item ?:
-The ternary operator.  @code{@var{a} ? @var{b} : @var{c}} can be thought
-of as:  if @var{a} then @var{b} else @var{c}.  @var{a} should be of an
-integral type.
-
-@item ||
-Logical @sc{or}.  Defined on integral types.
-
-@item &&
-Logical @sc{and}.  Defined on integral types.
-
-@item |
-Bitwise @sc{or}.  Defined on integral types.
-
-@item ^
-Bitwise exclusive-@sc{or}.  Defined on integral types.
-
-@item &
-Bitwise @sc{and}.  Defined on integral types.
-
-@item ==@r{, }!=
-Equality and inequality.  Defined on scalar types.  The value of these
-expressions is 0 for false and non-zero for true.
-
-@item <@r{, }>@r{, }<=@r{, }>=
-Less than, greater than, less than or equal, greater than or equal.
-Defined on scalar types.  The value of these expressions is 0 for false
-and non-zero for true.
-
-@item <<@r{, }>>
-left shift, and right shift.  Defined on integral types.
-
-@item @@
-The GDB ``artificial array'' operator (@pxref{Expressions, ,Expressions}).
-
-@item +@r{, }-
-Addition and subtraction.  Defined on integral types, floating-point types and
-pointer types.
-
-@item *@r{, }/@r{, }%
-Multiplication, division, and modulus.  Multiplication and division are
-defined on integral and floating-point types.  Modulus is defined on
-integral types.
-
-@item ++@r{, }--
-Increment and decrement.  When appearing before a variable, the
-operation is performed before the variable is used in an expression;
-when appearing after it, the variable's value is used before the
-operation takes place.
-
-@item *
-Pointer dereferencing.  Defined on pointer types.  Same precedence as
-@code{++}.
-
-@item &
-Address operator.  Defined on variables.  Same precedence as @code{++}.
-
-@item -
-Negative.  Defined on integral and floating-point types.  Same
-precedence as @code{++}.
-
-@item !
-Logical negation.  Defined on integral types.  Same precedence as
-@code{++}.
-
-@item ~
-Bitwise complement operator.  Defined on integral types.  Same precedence as
-@code{++}.
-
-@item .@r{, }->
-Structure member, and pointer-to-structure member.  For convenience,
-GDB regards the two as equivalent, choosing whether to dereference a
-pointer based on the stored type information.
-Defined on @code{struct}s and @code{union}s.
-
-@item []
-Array indexing.  @code{@var{a}[@var{i}]} is defined as
-@code{*(@var{a}+@var{i})}.  Same precedence as @code{->}.
-
-@item ()
-Function parameter list.  Same precedence as @code{->}.
-
-@item ::
-C++ scope resolution operator.  Defined on
-@code{struct}, @code{union}, and @code{class} types.
-
-@item ::
-The GDB scope operator (@pxref{Expressions, ,Expressions}).  Same precedence as
-@code{::}, above.
-@end table
-
-@cindex C and C++ constants
-@node C Constants, Cplusplus expressions, C Operators, C
-@subsubsection C and C++ Constants
-
-GDB allows you to express the constants of C and C++ in the
-following ways:
-
-@itemize @bullet
-@item
-Integer constants are a sequence of digits.  Octal constants are
-specified by a leading @samp{0} (ie. zero), and hexadecimal constants by
-a leading @samp{0x} or @samp{0X}.  Constants may also end with a letter
-@samp{l}, specifying that the constant should be treated as a
-@code{long} value.
-
-@item
-Floating point constants are a sequence of digits, followed by a decimal
-point, followed by a sequence of digits, and optionally followed by an
-exponent.  An exponent is of the form:
-@samp{@w{e@r{[[}+@r{]|}-@r{]}@var{nnn}}}, where @var{nnn} is another
-sequence of digits.  The @samp{+} is optional for positive exponents.
-
-@item
-Enumerated constants consist of enumerated identifiers, or their
-integral equivalents.
-
-@item
-Character constants are a single character surrounded by single quotes
-(@code{'}), or a number---the ordinal value of the corresponding character
-(usually its @sc{ASCII} value).  Within quotes, the single character may
-be represented by a letter or by @dfn{escape sequences}, which are of
-the form @samp{\@var{nnn}}, where @var{nnn} is the octal representation
-of the character's ordinal value; or of the form @samp{\@var{x}}, where
-@samp{@var{x}} is a predefined special character---for example,
-@samp{\n} for newline.
-
-@item
-String constants are a sequence of character constants surrounded
-by double quotes (@code{"}).
-
-@item
-Pointer constants are an integral value.
-@end itemize
-
-@node Cplusplus expressions, C Defaults, C Constants, C
-@subsubsection C++ Expressions
-
-@cindex expressions in C++
-GDB's expression handling has the following extensions to
-interpret a significant subset of C++ expressions:
-
-@enumerate
-
-@cindex member functions
-@item
-Member function calls are allowed; you can use expressions like
-
-@example
-count = aml->GetOriginal(x, y)
-@end example
-
-@kindex this
-@cindex namespace in C++
-@item
-While a member function is active (in the selected stack frame), your
-expressions have the same namespace available as the member function;
-that is, GDB allows implicit references to the class instance
-pointer @code{this} following the same rules as C++.
-
-@cindex call overloaded functions
-@cindex type conversions in C++
-@item
-You can call overloaded functions; GDB will resolve the function
-call to the right definition, with one restriction---you must use
-arguments of the type required by the function that you want to call.
-GDB will not perform conversions requiring constructors or
-user-defined type operators.
-
-@cindex reference declarations
-@item
-GDB understands variables declared as C++ references; you can use them in
-expressions just as you do in C++ source---they are automatically
-dereferenced.
-
-In the parameter list shown when GDB displays a frame, the values of
-reference variables are not displayed (unlike other variables); this
-avoids clutter, since references are often used for large structures.
-The @emph{address} of a reference variable is always shown, unless
-you have specified @samp{set print address off}.
-
-@item
-GDB supports the C++ name resolution operator @code{::}---your
-expressions can use it just as expressions in your program do.  Since
-one scope may be defined in another, you can use @code{::} repeatedly if
-necessary, for example in an expression like
-@samp{@var{scope1}::@var{scope2}::@var{name}}.  GDB also allows
-resolving name scope by reference to source files, in both C and C++
-debugging (@pxref{Variables, ,Program Variables}).
-@end enumerate
-
-@node C Defaults, C Checks, Cplusplus expressions, C
-@subsubsection C and C++ Defaults
-@cindex C and C++ defaults
-
-If you allow GDB to set type and range checking automatically, they
-both default to @code{off} whenever the working language changes to
-C/C++.  This happens regardless of whether you, or GDB,
-selected the working language.
-
-If you allow GDB to set the language automatically, it sets the
-working language to C/C++ on entering code compiled from a source file
-whose name ends with @file{.c} or @file{.cc}.
-@xref{Automatically, ,Having GDB infer the source language}, for
-further details.
-
-@node C Checks, Debugging C, C Defaults, C
-@subsubsection C and C++ Type and Range Checks
-@cindex C and C++ checks
-
-@quotation
-@emph{Warning:} in this release, GDB does not yet perform type or
-range checking.
-@end quotation
-@c FIXME remove warning when type/range checks added
-
-By default, when GDB parses C or C++ expressions, type checking
-is not used.  However, if you turn type checking on, GDB will
-consider two variables type equivalent if:
-
-@itemize @bullet
-@item
-The two variables are structured and have the same structure, union, or
-enumerated tag.
-
-@item
-Two two variables have the same type name, or types that have been
-declared equivalent through @code{typedef}.
-
-@ignore
-@c leaving this out because neither J Gilmore nor R Pesch understand it.
-@c FIXME--beers?
-@item
-The two @code{struct}, @code{union}, or @code{enum} variables are
-declared in the same declaration.  (Note: this may not be true for all C
-compilers.)
-@end ignore
-@end itemize
-
-Range checking, if turned on, is done on mathematical operations.  Array
-indices are not checked, since they are often used to index a pointer
-that is not itself an array.
-
-@node Debugging C, Debugging C plus plus, C Checks, C
-@subsubsection GDB and C
-
-The @code{set print union} and @code{show print union} commands apply to
-the @code{union} type.  When set to @samp{on}, any @code{union} that is
-inside a @code{struct} or @code{class} will also be printed.
-Otherwise, it will appear as @samp{@{...@}}.
-
-The @code{@@} operator aids in the debugging of dynamic arrays, formed
-with pointers and a memory allocation function.  (@pxref{Expressions, ,Expressions})
-
-@node Debugging C plus plus,  , Debugging C, C
-@subsubsection GDB Commands for C++
-
-@cindex commands for C++
-Some GDB commands are particularly useful with C++, and some are
-designed specifically for use with C++.  Here is a summary:
-
-@table @code
-@cindex break in overloaded functions
-@item @r{breakpoint menus}
-When you want a breakpoint in a function whose name is overloaded,
-GDB's breakpoint menus help you specify which function definition
-you want.  @xref{Breakpoint Menus}.
-
-@cindex overloading in C++
-@item rbreak @var{regex}
-Setting breakpoints using regular expressions is helpful for setting
-breakpoints on overloaded functions that are not members of any special
-classes.
-@xref{Set Breaks, ,Setting Breakpoints}.
-
-@cindex C++ exception handling
-@item catch @var{exceptions}
-@itemx info catch
-Debug C++ exception handling using these commands.  @xref{Exception
-Handling, ,Breakpoints and Exceptions}.
-
-@cindex inheritance
-@item ptype @var{typename}
-Print inheritance relationships as well as other information for type
-@var{typename}.
-@xref{Symbols, ,Examining the Symbol Table}.
-
-@cindex C++ symbol display
-@item set print demangle
-@itemx show print demangle
-@itemx set print asm-demangle
-@itemx show print asm-demangle
-Control whether C++ symbols display in their source form, both when
-displaying code as C++ source and when displaying disassemblies.
-@xref{Print Settings, ,Print Settings}.
-
-@item set print object
-@itemx show print object
-Choose whether to print derived (actual) or declared types of objects.
-@xref{Print Settings, ,Print Settings}.
-
-@item set print vtbl
-@itemx show print vtbl
-Control the format for printing virtual function tables.
-@xref{Print Settings, ,Print Settings}.
-@end table
-
-@node Modula-2,  , C, Support
-@subsection Modula-2
-@cindex Modula-2
-
-The extensions made to GDB to support Modula-2 support output
-from the GNU Modula-2 compiler (which is currently being developed).
-Other Modula-2 compilers are not currently supported, and attempting to
-debug executables produced by them will most likely result in an error
-as GDB reads in the executable's symbol table.
-
-@cindex expressions in Modula-2
-@menu
-* M2 Operators::                Built-in operators
-* Built-In Func/Proc::           Built-in Functions and Procedures
-* M2 Constants::                Modula-2 Constants
-* M2 Defaults::                 Default settings for Modula-2
-* Deviations::                  Deviations from standard Modula-2
-* M2 Checks::                   Modula-2 Type and Range Checks
-* M2 Scope::                    The scope operators @code{::} and @code{.}
-* GDB/M2::                      GDB and Modula-2
-@end menu
-
-@node M2 Operators, Built-In Func/Proc, Modula-2, Modula-2
-@subsubsection Operators
-@cindex Modula-2 operators
-
-Operators must be defined on values of specific types.  For instance,
-@code{+} is defined on numbers, but not on structures.  Operators are
-often defined on groups of types.  For the purposes of Modula-2, the
-following definitions hold:
-
-@itemize @bullet
-
-@item
-@emph{Integral types} consist of @code{INTEGER}, @code{CARDINAL}, and
-their subranges.
-
-@item
-@emph{Character types} consist of @code{CHAR} and its subranges.
-
-@item
-@emph{Floating-point types} consist of @code{REAL}.
-
-@item
-@emph{Pointer types} consist of anything declared as @code{POINTER TO
-@var{type}}.
-
-@item
-@emph{Scalar types} consist of all of the above.
-
-@item
-@emph{Set types} consist of @code{SET}s and @code{BITSET}s.
-
-@item
-@emph{Boolean types} consist of @code{BOOLEAN}.
-@end itemize
-
-@noindent
-The following operators are supported, and appear in order of
-increasing precedence:
-
-@table @code
-@item ,
-Function argument or array index separator.
-
-@item :=
-Assignment.  The value of @var{var} @code{:=} @var{value} is
-@var{value}.
-
-@item <@r{, }>
-Less than, greater than on integral, floating-point, or enumerated
-types.
-
-@item <=@r{, }>=
-Less than, greater than, less than or equal to, greater than or equal to
-on integral, floating-point and enumerated types, or set inclusion on
-set types.  Same precedence as @code{<}.
-
-@item =@r{, }<>@r{, }#
-Equality and two ways of expressing inequality, valid on scalar types.
-Same precedence as @code{<}.  In GDB scripts, only @code{<>} is
-available for inequality, since @code{#} conflicts with the script
-comment character.
-
-@item IN
-Set membership.  Defined on set types and the types of their members.
-Same precedence as @code{<}.
-
-@item OR
-Boolean disjunction.  Defined on boolean types.
-
-@item AND@r{, }&
-Boolean conjuction.  Defined on boolean types.
-
-@item @@
-The GDB ``artificial array'' operator (@pxref{Expressions, ,Expressions}).
-
-@item +@r{, }-
-Addition and subtraction on integral and floating-point types, or union
-and difference on set types.
-
-@item *
-Multiplication on integral and floating-point types, or set intersection
-on set types.
-
-@item /
-Division on floating-point types, or symmetric set difference on set
-types.  Same precedence as @code{*}.
-
-@item DIV@r{, }MOD
-Integer division and remainder.  Defined on integral types.  Same
-precedence as @code{*}.
-
-@item -
-Negative. Defined on @code{INTEGER}s and @code{REAL}s.
-
-@item ^
-Pointer dereferencing.  Defined on pointer types.
-
-@item NOT
-Boolean negation.  Defined on boolean types.  Same precedence as
-@code{^}.
-
-@item .
-@code{RECORD} field selector.  Defined on @code{RECORD}s.  Same
-precedence as @code{^}.
-
-@item []
-Array indexing.  Defined on @code{ARRAY}s.  Same precedence as @code{^}.
-
-@item ()
-Procedure argument list.  Defined on @code{PROCEDURE}s.  Same precedence
-as @code{^}.
-
-@item ::@r{, }.
-GDB and Modula-2 scope operators.
-@end table
-
-@quotation
-@emph{Warning:} Sets and their operations are not yet supported, so GDB
-will treat the use of the operator @code{IN}, or the use of operators
-@code{+}, @code{-}, @code{*}, @code{/}, @code{=}, , @code{<>}, @code{#},
-@code{<=}, and @code{>=} on sets as an error.
-@end quotation
-
-@cindex Modula-2 built-ins
-@node Built-In Func/Proc, M2 Constants, M2 Operators, Modula-2
-@subsubsection Built-in Functions and Procedures
-
-Modula-2 also makes available several built-in procedures and functions.
-In describing these, the following metavariables are used:
-
-@table @var
-
-@item a
-represents an @code{ARRAY} variable.
-
-@item c
-represents a @code{CHAR} constant or variable.
-
-@item i
-represents a variable or constant of integral type.
-
-@item m
-represents an identifier that belongs to a set.  Generally used in the
-same function with the metavariable @var{s}.  The type of @var{s} should
-be @code{SET OF @var{mtype}} (where @var{mtype} is the type of @var{m}.
-
-@item n
-represents a variable or constant of integral or floating-point type.
-
-@item r
-represents a variable or constant of floating-point type.
-
-@item t
-represents a type.
-
-@item v
-represents a variable.
-
-@item x
-represents a variable or constant of one of many types.  See the
-explanation of the function for details.
-@end table
-
-All Modula-2 built-in procedures also return a result, described below.
-
-@table @code
-@item ABS(@var{n})
-Returns the absolute value of @var{n}.
-
-@item CAP(@var{c})
-If @var{c} is a lower case letter, it returns its upper case
-equivalent, otherwise it returns its argument
-
-@item CHR(@var{i})
-Returns the character whose ordinal value is @var{i}.
-
-@item DEC(@var{v})
-Decrements the value in the variable @var{v}.  Returns the new value.
-
-@item DEC(@var{v},@var{i})
-Decrements the value in the variable @var{v} by @var{i}.  Returns the
-new value.
-
-@item EXCL(@var{m},@var{s})
-Removes the element @var{m} from the set @var{s}.  Returns the new
-set.
-
-@item FLOAT(@var{i})
-Returns the floating point equivalent of the integer @var{i}.
-
-@item HIGH(@var{a})
-Returns the index of the last member of @var{a}.
-
-@item INC(@var{v})
-Increments the value in the variable @var{v}.  Returns the new value.
-
-@item INC(@var{v},@var{i})
-Increments the value in the variable @var{v} by @var{i}.  Returns the
-new value.
-
-@item INCL(@var{m},@var{s})
-Adds the element @var{m} to the set @var{s} if it is not already
-there.  Returns the new set.
-
-@item MAX(@var{t})
-Returns the maximum value of the type @var{t}.
-
-@item MIN(@var{t})
-Returns the minimum value of the type @var{t}.
-
-@item ODD(@var{i})
-Returns boolean TRUE if @var{i} is an odd number.
-
-@item ORD(@var{x})
-Returns the ordinal value of its argument.  For example, the ordinal
-value of a character is its ASCII value (on machines supporting the
-ASCII character set).  @var{x} must be of an ordered type, which include
-integral, character and enumerated types.
-
-@item SIZE(@var{x})
-Returns the size of its argument.  @var{x} can be a variable or a type.
-
-@item TRUNC(@var{r})
-Returns the integral part of @var{r}.
-
-@item VAL(@var{t},@var{i})
-Returns the member of the type @var{t} whose ordinal value is @var{i}.
-@end table
-
-@quotation
-@emph{Warning:}  Sets and their operations are not yet supported, so
-GDB will treat the use of procedures @code{INCL} and @code{EXCL} as
-an error.
-@end quotation
-
-@cindex Modula-2 constants
-@node M2 Constants, M2 Defaults, Built-In Func/Proc, Modula-2
-@subsubsection Constants
-
-GDB allows you to express the constants of Modula-2 in the following
-ways:
-
-@itemize @bullet
-
-@item
-Integer constants are simply a sequence of digits.  When used in an
-expression, a constant is interpreted to be type-compatible with the
-rest of the expression.  Hexadecimal integers are specified by a
-trailing @samp{H}, and octal integers by a trailing @samp{B}.
-
-@item
-Floating point constants appear as a sequence of digits, followed by a
-decimal point and another sequence of digits.  An optional exponent can
-then be specified, in the form @samp{E@r{[}+@r{|}-@r{]}@var{nnn}}, where
-@samp{@r{[}+@r{|}-@r{]}@var{nnn}} is the desired exponent.  All of the
-digits of the floating point constant must be valid decimal (base 10)
-digits.
-
-@item
-Character constants consist of a single character enclosed by a pair of
-like quotes, either single (@code{'}) or double (@code{"}).  They may
-also be expressed by their ordinal value (their ASCII value, usually)
-followed by a @samp{C}.
-
-@item
-String constants consist of a sequence of characters enclosed by a
-pair of like quotes, either single (@code{'}) or double (@code{"}).
-Escape sequences in the style of C are also allowed.  @xref{C
-Constants, ,C and C++ Constants}, for a brief explanation of escape
-sequences.
-
-@item
-Enumerated constants consist of an enumerated identifier.
-
-@item
-Boolean constants consist of the identifiers @code{TRUE} and
-@code{FALSE}.
-
-@item
-Pointer constants consist of integral values only.
-
-@item
-Set constants are not yet supported.
-@end itemize
-
-@node M2 Defaults, Deviations, M2 Constants, Modula-2
-@subsubsection Modula-2 Defaults
-@cindex Modula-2 defaults
-
-If type and range checking are set automatically by GDB, they
-both default to @code{on} whenever the working language changes to
-Modula-2.  This happens regardless of whether you, or GDB,
-selected the working language.
-
-If you allow GDB to set the language automatically, then entering
-code compiled from a file whose name ends with @file{.mod} will set the
-working language to Modula-2. @xref{Automatically, ,Having GDB set
-the language automatically}, for further details.
-
-@node Deviations, M2 Checks, M2 Defaults, Modula-2
-@subsubsection Deviations from Standard Modula-2
-@cindex Modula-2, deviations from
-
-A few changes have been made to make Modula-2 programs easier to debug.
-This is done primarily via loosening its type strictness:
-
-@itemize @bullet
-@item
-Unlike in standard Modula-2, pointer constants can be formed by
-integers.  This allows you to modify pointer variables during
-debugging.  (In standard Modula-2, the actual address contained in a
-pointer variable is hidden from you; it can only be modified
-through direct assignment to another pointer variable or expression that
-returned a pointer.)
-
-@item
-C escape sequences can be used in strings and characters to represent
-non-printable characters.  GDB will print out strings with these
-escape sequences embedded.  Single non-printable characters are
-printed using the @samp{CHR(@var{nnn})} format.
-
-@item
-The assignment operator (@code{:=}) returns the value of its right-hand
-argument.
-
-@item
-All built-in procedures both modify @emph{and} return their argument.
-@end itemize
-
-@node M2 Checks, M2 Scope, Deviations, Modula-2
-@subsubsection Modula-2 Type and Range Checks
-@cindex Modula-2 checks
-
-@quotation
-@emph{Warning:} in this release, GDB does not yet perform type or
-range checking.
-@end quotation
-@c FIXME remove warning when type/range checks added
-
-GDB considers two Modula-2 variables type equivalent if:
-
-@itemize @bullet
-@item
-They are of types that have been declared equivalent via a @code{TYPE
-@var{t1} = @var{t2}} statement
-
-@item
-They have been declared on the same line.  (Note:  This is true of the
-GNU Modula-2 compiler, but it may not be true of other compilers.)
-@end itemize
-
-As long as type checking is enabled, any attempt to combine variables
-whose types are not equivalent is an error.
-
-Range checking is done on all mathematical operations, assignment, array
-index bounds, and all built-in functions and procedures.
-
-@node M2 Scope, GDB/M2, M2 Checks, Modula-2
-@subsubsection The scope operators @code{::} and @code{.}
-@cindex scope
-@kindex .
-@cindex colon, doubled as scope operator
-@ifinfo
-@kindex colon-colon
-@c Info cannot handoe :: but TeX can.
-@end ifinfo
-@iftex
-@kindex ::
-@end iftex
-
-There are a few subtle differences between the Modula-2 scope operator
-(@code{.}) and the GDB scope operator (@code{::}).  The two have
-similar syntax:
-
-@example
-
-@var{module} . @var{id}
-@var{scope} :: @var{id}
-@end example
-
-@noindent
-where @var{scope} is the name of a module or a procedure,
-@var{module} the name of a module, and @var{id} is any declared
-identifier within your program, except another module.
-
-Using the @code{::} operator makes GDB search the scope
-specified by @var{scope} for the identifier @var{id}.  If it is not
-found in the specified scope, then GDB will search all scopes
-enclosing the one specified by @var{scope}.
-
-Using the @code{.} operator makes GDB search the current scope for
-the identifier specified by @var{id} that was imported from the
-definition module specified by @var{module}.  With this operator, it is
-an error if the identifier @var{id} was not imported from definition
-module @var{module}, or if @var{id} is not an identifier in
-@var{module}.
-
-@node GDB/M2,  , M2 Scope, Modula-2
-@subsubsection GDB and Modula-2
-
-Some GDB commands have little use when debugging Modula-2 programs.
-Five subcommands of @code{set print} and @code{show print} apply
-specifically to C and C++: @samp{vtbl}, @samp{demangle},
-@samp{asm-demangle}, @samp{object}, and @samp{union}.  The first four
-apply to C++, and the last to C's @code{union} type, which has no direct
-analogue in Modula-2.
-
-The @code{@@} operator (@pxref{Expressions, ,Expressions}), while available
-while using any language, is not useful with Modula-2.  Its
-intent is to aid the debugging of @dfn{dynamic arrays}, which cannot be
-created in Modula-2 as they can in C or C++.  However, because an
-address can be specified by an integral constant, the construct
-@samp{@{@var{type}@}@var{adrexp}} is still useful.  (@pxref{Expressions, ,Expressions})
-
-@cindex @code{#} in Modula-2
-In GDB scripts, the Modula-2 inequality operator @code{#} is
-interpreted as the beginning of a comment.  Use @code{<>} instead.
-
-@node Symbols, Altering, Languages, Top
-@chapter Examining the Symbol Table
-
-The commands described in this section allow you to inquire about the
-symbols (names of variables, functions and types) defined in your
-program.  This information is inherent in the text of your program and
-does not change as your program executes.  GDB finds it in your
-program's symbol table, in the file indicated when you started GDB
-(@pxref{File Options, ,Choosing Files}), or by one of the
-file-management commands (@pxref{Files, ,Commands to Specify Files}).
-
-@table @code
-@item info address @var{symbol}
-@kindex info address
-Describe where the data for @var{symbol} is stored.  For a register
-variable, this says which register it is kept in.  For a non-register
-local variable, this prints the stack-frame offset at which the variable
-is always stored.
-
-Note the contrast with @samp{print &@var{symbol}}, which does not work
-at all for a register variables, and for a stack local variable prints
-the exact address of the current instantiation of the variable.
-
-@item whatis @var{exp}
-@kindex whatis
-Print the data type of expression @var{exp}.  @var{exp} is not
-actually evaluated, and any side-effecting operations (such as
-assignments or function calls) inside it do not take place.
-@xref{Expressions, ,Expressions}.
-
-@item whatis
-Print the data type of @code{$}, the last value in the value history.
-
-@item ptype @var{typename}
-@kindex ptype
-Print a description of data type @var{typename}.  @var{typename} may be
-the name of a type, or for C code it may have the form
-@samp{struct @var{struct-tag}}, @samp{union @var{union-tag}} or
-@samp{enum @var{enum-tag}}.
-
-@item ptype @var{exp}
-@itemx ptype
-Print a description of the type of expression @var{exp}.  @code{ptype}
-differs from @code{whatis} by printing a detailed description, instead
-of just the name of the type.  For example, if your program declares a
-variable as
-
-@example
-struct complex @{double real; double imag;@} v;
-@end example
-
-@noindent
-compare the output of the two commands:
-
-@example
-@group
-(gdb) whatis v
-type = struct complex
-(gdb) ptype v
-type = struct complex @{
-    double real;
-    double imag;
-@}
-@end group
-@end example
-
-@noindent
-As with @code{whatis}, using @code{ptype} without an argument refers to
-the type of @code{$}, the last value in the value history.
-
-@item info types @var{regexp}
-@itemx info types
-@kindex info types
-Print a brief description of all types whose name matches @var{regexp}
-(or all types in your program, if you supply no argument).  Each
-complete typename is matched as though it were a complete line; thus,
-@samp{i type value} gives information on all types in your program whose
-name includes the string @code{value}, but @samp{i type ^value$} gives
-information only on types whose complete name is @code{value}.
-
-This command differs from @code{ptype} in two ways: first, like
-@code{whatis}, it does not print a detailed description; second, it
-lists all source files where a type is defined.
-
-@item info source
-@kindex info source
-Show the name of the current source file---that is, the source file for
-the function containing the current point of execution---and the language
-it was written in.
-
-@item info sources
-@kindex info sources
-Print the names of all source files in your program for which there is
-debugging information, organized into two lists: files whose symbols
-have already been read, and files whose symbols will be read when needed.
-
-@item info functions
-@kindex info functions
-Print the names and data types of all defined functions.
-
-@item info functions @var{regexp}
-Print the names and data types of all defined functions
-whose names contain a match for regular expression @var{regexp}.
-Thus, @samp{info fun step} finds all functions whose names
-include @code{step}; @samp{info fun ^step} finds those whose names
-start with @code{step}.
-
-@item info variables
-@kindex info variables
-Print the names and data types of all variables that are declared
-outside of functions (i.e., excluding local variables).
-
-@item info variables @var{regexp}
-Print the names and data types of all variables (except for local
-variables) whose names contain a match for regular expression
-@var{regexp}.
-
-@ignore
-This was never implemented.
-@item info methods
-@itemx info methods @var{regexp}
-@kindex info methods
-The @code{info methods} command permits the user to examine all defined
-methods within C++ program, or (with the @var{regexp} argument) a
-specific set of methods found in the various C++ classes.  Many
-C++ classes provide a large number of methods.  Thus, the output
-from the @code{ptype} command can be overwhelming and hard to use.  The
-@code{info-methods} command filters the methods, printing only those
-which match the regular-expression @var{regexp}.
-@end ignore
-
-@item printsyms @var{filename}
-@itemx printpsyms @var{filename}
-@kindex printsyms
-@cindex symbol dump
-@kindex printsyms
-@cindex partial symbol dump
-Write a dump of debugging symbol data into the file @var{filename}.
-These commands are used to debug the GDB symbol-reading code.  Only
-symbols with debugging data are included.  If you use @code{printsyms},
-GDB includes all the symbols for which it has already collected full
-details: that is, @var{filename} reflects symbols for only those files
-whose symbols GDB has read.  You can use the command @code{info
-sources} to find out which files these are.  If you use
-@code{printpsyms}, the dump also shows information about symbols that
-GDB only knows partially---that is, symbols defined in files that
-GDB has skimmed, but not yet read completely.  The description of
-@code{symbol-file} describes how GDB reads symbols; both commands
-are described under @ref{Files, ,Commands to Specify Files}.
-@end table
-
-@node Altering, GDB Files, Symbols, Top
-@chapter Altering Execution
-
-Once you think you have found an error in your program, you might want to
-find out for certain whether correcting the apparent error would lead to
-correct results in the rest of the run.  You can find the answer by
-experiment, using the GDB features for altering execution of the
-program.
-
-For example, you can store new values into variables or memory
-locations, give your program a signal, restart it at a different address,
-or even return prematurely from a function to its caller.
-
-@menu
-* Assignment::                  Assignment to Variables
-* Jumping::                     Continuing at a Different Address
-* Signaling::                   Giving your program a Signal
-* Returning::                   Returning from a Function
-* Calling::                     Calling your Program's Functions
-* Patching::                    Patching your Program
-@end menu
-
-@node Assignment, Jumping, Altering, Altering
-@section Assignment to Variables
-
-@cindex assignment
-@cindex setting variables
-To alter the value of a variable, evaluate an assignment expression.
-@xref{Expressions, ,Expressions}.  For example,
-
-@example
-print x=4
-@end example
-
-@noindent
-stores the value 4 into the variable @code{x}, and then prints the
-value of the assignment expression (which is 4).  @xref{Languages,
-,Using GDB with Different Languages}, for more information on
-operators in supported languages.
-
-@kindex set variable
-@cindex variables, setting
-If you are not interested in seeing the value of the assignment, use the
-@code{set} command instead of the @code{print} command.  @code{set} is
-really the same as @code{print} except that the expression's value is not
-printed and is not put in the value history (@pxref{Value History, ,Value History}).  The
-expression is evaluated only for its effects.
-
-If the beginning of the argument string of the @code{set} command
-appears identical to a @code{set} subcommand, use the @code{set
-variable} command instead of just @code{set}.  This command is identical
-to @code{set} except for its lack of subcommands.  For example, a
-program might well have a variable @code{width}---which leads to
-an error if we try to set a new value with just @samp{set width=13}, as
-we might if @code{set width} did not happen to be a GDB command:
-
-@example
-(gdb) whatis width
-type = double
-(gdb) p width
-$4 = 13
-(gdb) set width=47
-Invalid syntax in expression.
-@end example
-
-@noindent
-The invalid expression, of course, is @samp{=47}.  What we can do in
-order to actually set our program's variable @code{width} is
-
-@example
-(gdb) set var width=47
-@end example
-
-GDB allows more implicit conversions in assignments than C; you can
-freely store an integer value into a pointer variable or vice versa,
-and any structure can be converted to any other structure that is the
-same length or shorter.
-@comment FIXME: how do structs align/pad in these conversions?
-@comment        /pesch@cygnus.com 18dec1990
-
-To store values into arbitrary places in memory, use the @samp{@{@dots{}@}}
-construct to generate a value of specified type at a specified address
-(@pxref{Expressions, ,Expressions}).  For example, @code{@{int@}0x83040} refers
-to memory location @code{0x83040} as an integer (which implies a certain size
-and representation in memory), and
-
-@example
-set @{int@}0x83040 = 4
-@end example
-
-@noindent
-stores the value 4 into that memory location.
-
-@node Jumping, Signaling, Assignment, Altering
-@section Continuing at a Different Address
-
-Ordinarily, when you continue your program, you do so at the place where
-it stopped, with the @code{continue} command.  You can instead continue at
-an address of your own choosing, with the following commands:
-
-@table @code
-@item jump @var{linespec}
-@kindex jump
-Resume execution at line @var{linespec}.  Execution will stop
-immediately if there is a breakpoint there.  @xref{List, ,Printing
-Source Lines}, for a description of the different forms of
-@var{linespec}.
-
-The @code{jump} command does not change the current stack frame, or
-the stack pointer, or the contents of any memory location or any
-register other than the program counter.  If line @var{linespec} is in
-a different function from the one currently executing, the results may
-be bizarre if the two functions expect different patterns of arguments or
-of local variables.  For this reason, the @code{jump} command requests
-confirmation if the specified line is not in the function currently
-executing.  However, even bizarre results are predictable if you are
-well acquainted with the machine-language code of your program.
-
-@item jump *@var{address}
-Resume execution at the instruction at address @var{address}.
-@end table
-
-You can get much the same effect as the @code{jump} command by storing a
-new value into the register @code{$pc}.  The difference is that this
-does not start your program running; it only changes the address where it
-@emph{will} run when it is continued.  For example,
-
-@example
-set $pc = 0x485
-@end example
-
-@noindent
-causes the next @code{continue} command or stepping command to execute at
-address @code{0x485}, rather than at the address where your program stopped.
-@xref{Continuing and Stepping, ,Continuing and Stepping}.
-
-The most common occasion to use the @code{jump} command is to back up,
-perhaps with more breakpoints set, over a portion of a program that has
-already executed, in order to examine its execution in more detail.
-
-@node Signaling, Returning, Jumping, Altering
-@c @group
-@section Giving your program a Signal
-
-@table @code
-@item signal @var{signalnum}
-@kindex signal
-Resume execution where your program stopped, but give it immediately the
-signal number @var{signalnum}.
-
-Alternatively, if @var{signalnum} is zero, continue execution without
-giving a signal.  This is useful when your program stopped on account of
-a signal and would ordinary see the signal when resumed with the
-@code{continue} command; @samp{signal 0} causes it to resume without a
-signal.
-
-@code{signal} does not repeat when you press @key{RET} a second time
-after executing the command.
-@end table
-@c @end group
-
-@node Returning, Calling, Signaling, Altering
-@section Returning from a Function
-
-@table @code
-@item return
-@itemx return @var{expression}
-@cindex returning from a function
-@kindex return
-You can cancel execution of a function call with the @code{return}
-command.  If you give an
-@var{expression} argument, its value is used as the function's return
-value.
-@end table
-
-When you use @code{return}, GDB discards the selected stack frame
-(and all frames within it).  You can think of this as making the
-discarded frame return prematurely.  If you wish to specify a value to
-be returned, give that value as the argument to @code{return}.
-
-This pops the selected stack frame (@pxref{Selection, ,Selecting a
-Frame}), and any other frames inside of it, leaving its caller as the
-innermost remaining frame.  That frame becomes selected.  The
-specified value is stored in the registers used for returning values
-of functions.
-
-The @code{return} command does not resume execution; it leaves the
-program stopped in the state that would exist if the function had just
-returned.  In contrast, the @code{finish} command (@pxref{Continuing
-and Stepping, ,Continuing and Stepping}) resumes execution until the
-selected stack frame returns naturally.
-
-@node     Calling, Patching, Returning, Altering
-@section Calling your Program's Functions
-
-@cindex calling functions
-@kindex call
-@table @code
-@item call @var{expr}
-Evaluate the expression @var{expr} without displaying @code{void}
-returned values.
-@end table
-
-You can use this variant of the @code{print} command if you want to
-execute a function from your program, but without cluttering the output
-with @code{void} returned values.  The result is printed and saved in
-the value history, if it is not void.
-
-@node Patching,  , Calling, Altering
-@section Patching your Program
-@cindex patching binaries
-@cindex writing into executables
-@cindex writing into corefiles
-
-By default, GDB opens the file containing your program's executable
-code (or the corefile) read-only.  This prevents accidental alterations
-to machine code; but it also prevents you from intentionally patching
-your program's binary.
-
-If you'd like to be able to patch the binary, you can specify that
-explicitly with the @code{set write} command.  For example, you might
-want to turn on internal debugging flags, or even to make emergency
-repairs.
-
-@table @code
-@item set write on
-@itemx set write off
-@kindex set write
-If you specify @samp{set write on}, GDB will open executable and
-core files for both reading and writing; if you specify @samp{set write
-off} (the default), GDB will open them read-only.
-
-If you have already loaded a file, you must load it
-again (using the @code{exec-file} or @code{core-file} command) after
-changing @code{set write}, for your new setting to take effect.
-
-@item show write
-@kindex show write
-Display whether executable files and core files will be opened for
-writing as well as reading.
-@end table
-
-@node GDB Files, Targets, Altering, Top
-@chapter GDB's Files
-
-GDB needs to know the file name of the program to be debugged, both in
-order to read its symbol table and in order to start your program.  To
-debug a core dump of a previous run, GDB must be told the file name of
-the core dump.
-
-@menu
-* Files::                       Commands to Specify Files
-* Symbol Errors::               Errors Reading Symbol Files
-@end menu
-
-@node Files, Symbol Errors, GDB Files, GDB Files
-@section Commands to Specify Files
-@cindex core dump file
-@cindex symbol table
-
-The usual way to specify executable and core dump file names is with
-the command arguments given when you start GDB, (@pxref{Invocation,
-,Getting In and Out of GDB}.
-
-Occasionally it is necessary to change to a different file during a
-GDB session.  Or you may run GDB and forget to specify the files you
-want to use.  In these situations the GDB commands to specify new files
-are useful.
-
-@table @code
-@item file @var{filename}
-@cindex executable file
-@kindex file
-Use @var{filename} as the program to be debugged.  It is read for its
-symbols and for the contents of pure memory.  It is also the program
-executed when you use the @code{run} command.  If you do not specify a
-directory and the file is not found in GDB's working directory, GDB
-uses the environment variable @code{PATH} as a list of directories to
-search, just as the shell does when looking for a program to run.  You
-can change the value of this variable, for both GDB and your program,
-using the @code{path} command.
-
-@item file
-@code{file} with no argument makes GDB discard any information it
-has on both executable file and the symbol table.
-
-@item exec-file @r{[} @var{filename} @r{]}
-@kindex exec-file
-Specify that the program to be run (but not the symbol table) is found
-in @var{filename}.  GDB will search the environment variable @code{PATH}
-if necessary to locate your program.  Omitting @var{filename} means to
-discard information on the executable file.
-
-@item symbol-file @r{[} @var{filename} @r{]}
-@kindex symbol-file
-Read symbol table information from file @var{filename}.  @code{PATH} is
-searched when necessary.  Use the @code{file} command to get both symbol
-table and program to run from the same file.
-
-@code{symbol-file} with no argument clears out GDB's information on your
-program's symbol table.
-
-The @code{symbol-file} command causes GDB to forget the contents of its
-convenience variables, the value history, and all breakpoints and
-auto-display expressions.  This is because they may contain pointers to
-the internal data recording symbols and data types, which are part of
-the old symbol table data being discarded inside GDB.
-
-@code{symbol-file} will not repeat if you press @key{RET} again after
-executing it once.
-
-On some kinds of object files, the @code{symbol-file} command does not
-actually read the symbol table in full right away.  Instead, it scans
-the symbol table quickly to find which source files and which symbols
-are present.  The details are read later, one source file at a time,
-as they are needed.
-
-The purpose of this two-stage reading strategy is to make GDB start up
-faster.  For the most part, it is invisible except for occasional
-pauses while the symbol table details for a particular source file are
-being read.  (The @code{set verbose} command can turn these pauses
-into messages if desired. @xref{Messages/Warnings, ,Optional Warnings
-and Messages}.) 
-
-When the symbol table is stored in COFF format, @code{symbol-file} does
-read the symbol table data in full right away.  We have not implemented
-the two-stage strategy for COFF yet.
-
-When GDB is configured for a particular environment, it will
-understand debugging information in whatever format is the standard
-generated for that environment; you may use either a GNU compiler, or
-other compilers that adhere to the local conventions.  Best results are
-usually obtained from GNU compilers; for example, using @code{gcc}
-you can generate debugging information for optimized code.
-
-@item core-file @r{[} @var{filename} @r{]}
-@kindex core
-@kindex core-file
-Specify the whereabouts of a core dump file to be used as the ``contents
-of memory''.  Traditionally, core files contain only some parts of the
-address space of the process that generated them; GDB can access the
-executable file itself for other parts.
-
-@code{core-file} with no argument specifies that no core file is
-to be used.
-
-Note that the core file is ignored when your program is actually running
-under GDB.  So, if you have been running your program and you wish to
-debug a core file instead, you must kill the subprocess in which the
-program is running.  To do this, use the @code{kill} command
-(@pxref{Kill Process, ,Killing the Child Process}).
-
-@item load @var{filename}
-@kindex load
-Depending on what remote debugging facilities are configured into
-GDB, the @code{load} command may be available.  Where it exists, it
-is meant to make @var{filename} (an executable) available for debugging
-on the remote system---by downloading, or dynamic linking, for example.
-@code{load} also records @var{filename}'s symbol table in GDB, like
-the @code{add-symbol-file} command.
-
-If @code{load} is not available on your GDB, attempting to execute
-it gets the error message ``@code{You can't do that when your target is
-@dots{}}''
-
-On VxWorks, @code{load} will dynamically link @var{filename} on the
-current target system as well as adding its symbols in GDB.
-
-@cindex download to Nindy-960
-With the Nindy interface to an Intel 960 board, @code{load} will
-download @var{filename} to the 960 as well as adding its symbols in
-GDB.
-
-
-@code{load} will not repeat if you press @key{RET} again after using it.
-
-@item add-symbol-file @var{filename} @var{address}
-@kindex add-symbol-file
-@cindex dynamic linking
-The @code{add-symbol-file} command reads additional symbol table information
-from the file @var{filename}.  You would use this command when @var{filename}
-has been dynamically loaded (by some other means) into the program that
-is running.  @var{address} should be the memory address at which the
-file has been loaded; GDB cannot figure this out for itself.
-
-The symbol table of the file @var{filename} is added to the symbol table
-originally read with the @code{symbol-file} command.  You can use the
-@code{add-symbol-file} command any number of times; the new symbol data thus
-read keeps adding to the old.  To discard all old symbol data instead,
-use the @code{symbol-file} command.
-
-@code{add-symbol-file} will not repeat if you press @key{RET} after using it.
-
-@item info files
-@itemx info target
-@kindex info files
-@kindex info target
-@code{info files} and @code{info target} are synonymous; both print
-the current targets (@pxref{Targets, ,Specifying a Debugging Target}),
-including the names of the executable and core dump files currently in
-use by GDB, and the files from which symbols were loaded.  The command
-@code{help targets} lists all possible targets rather than current
-ones.
-
-@end table
-
-All file-specifying commands allow both absolute and relative file names
-as arguments.  GDB always converts the file name to an absolute path
-name and remembers it that way.
-
-@cindex shared libraries
-
-GDB supports the SunOS shared library format.  GDB automatically
-loads symbol definitions from shared libraries when you use the
-@code{run} command, or when you examine a core file.  (Before you issue
-the @code{run} command, GDB will not understand references to a
-function in a shared library, however---unless you are debugging a core
-file).
-@c FIXME: next GDB release should permit some refs to undef
-@c FIXME...symbols---eg in a break cmd---assuming they are from a shared lib
-
-@table @code
-@item info share
-@itemx info sharedlibrary
-@kindex info sharedlibrary
-@kindex info share
-Print the names of the shared libraries which are currently loaded.
-
-@item sharedlibrary @var{regex}
-@itemx share @var{regex}
-@kindex sharedlibrary
-@kindex share
-This is an obsolescent command; you can use it to explicitly
-load shared object library symbols for files matching a UNIX regular
-expression, but as with files loaded automatically, it will only load
-shared libraries required by your program for a core file or after
-typing @code{run}.  If @var{regex} is omitted all shared libraries
-required by your program are loaded.
-@end table
-
-@node Symbol Errors,  , Files, GDB Files
-@section Errors Reading Symbol Files
-
-While reading a symbol file, GDB will occasionally encounter problems,
-such as symbol types it does not recognize, or known bugs in compiler
-output.  By default, GDB does not notify you of such problems, since
-they are relatively common and primarily of interest to people
-debugging compilers.  If you are interested in seeing information
-about ill-constructed symbol tables, you can either ask GDB to print
-only one message about each such type of problem, no matter how many
-times the problem occurs; or you can ask GDB to print more messages,
-to see how many times the problems occur, with the @code{set
-complaints} command (@pxref{Messages/Warnings, ,Optional Warnings and
-Messages}).
-
-The messages currently printed, and their meanings, are:
-
-@table @code
-@item inner block not inside outer block in @var{symbol}
-
-The symbol information shows where symbol scopes begin and end
-(such as at the start of a function or a block of statements).  This
-error indicates that an inner scope block is not fully contained
-in its outer scope blocks.
-
-GDB circumvents the problem by treating the inner block as if it had
-the same scope as the outer block.  In the error message, @var{symbol}
-may be shown as ``@code{(don't know)}'' if the outer block is not a
-function.
-
-@item block at @var{address} out of order
-
-The symbol information for symbol scope blocks should occur in
-order of increasing addresses.  This error indicates that it does not
-do so.
-
-GDB does not circumvent this problem, and will have trouble locating
-symbols in the source file whose symbols being read.  (You can often
-determine what source file is affected by specifying @code{set verbose
-on}.  @xref{Messages/Warnings, ,Optional Warnings and Messages}.)
-
-@item bad block start address patched
-
-The symbol information for a symbol scope block has a start address
-smaller than the address of the preceding source line.  This is known
-to occur in the SunOS 4.1.1 (and earlier) C compiler.
-
-GDB circumvents the problem by treating the symbol scope block as
-starting on the previous source line.
-
-@item bad string table offset in symbol @var{n}
-
-@cindex foo
-Symbol number @var{n} contains a pointer into the string table which is
-larger than the size of the string table.
-
-GDB circumvents the problem by considering the symbol to have the
-name @code{foo}, which may cause other problems if many symbols end up
-with this name.
-
-@item unknown symbol type @code{0x@var{nn}}
-
-The symbol information contains new data types that GDB does not yet
-know how to read.  @code{0x@var{nn}} is the symbol type of the misunderstood
-information, in hexadecimal.
-
-GDB circumvents the error by ignoring this symbol information.  This
-will usually allow your program to be debugged, though certain symbols
-will not be accessible.  If you encounter such a problem and feel like
-debugging it, you can debug @code{gdb} with itself, breakpoint on
-@code{complain}, then go up to the function @code{read_dbx_symtab} and
-examine @code{*bufp} to see the symbol.
-
-@item stub type has NULL name
-GDB could not find the full definition for a struct or class.
-
-@item const/volatile indicator missing (ok if using g++ v1.x), got@dots{}
-
-The symbol information for a C++ member function is missing some
-information that recent versions of the compiler should have output
-for it.
-
-@item info mismatch between compiler and debugger
-
-GDB could not parse a type specification output by the compiler.
-@end table
-
-@node     Targets, Controlling GDB, GDB Files, Top
-@chapter Specifying a Debugging Target
-@cindex debugging target
-@kindex target
-
-A @dfn{target} is the execution environment occupied by your program.
-Often, GDB runs in the same host environment as your program; in
-that case, the debugging target is specified as a side effect when you
-use the @code{file} or @code{core} commands.  When you need more
-flexibility---for example, running GDB on a physically separate
-host, or controlling a standalone system over a serial port or a
-realtime system over a TCP/IP connection---you can use the @code{target}
-command to specify one of the target types configured for GDB
-(@pxref{Target Commands, ,Commands for Managing Targets}).
-
-@menu
-* Active Targets::              Active Targets
-* Target Commands::             Commands for Managing Targets
-* Remote::                      Remote Debugging
-@end menu
-
-@node Active Targets, Target Commands, Targets, Targets
-@section Active Targets
-@cindex stacking targets
-@cindex active targets
-@cindex multiple targets
-
-There are three classes of targets: processes, core files, and
-executable files.  GDB can work concurrently on up to three active
-targets, one in each class.  This allows you to (for example) start a
-process and inspect its activity without abandoning your work on a core
-file.
-
-If, for example, you execute @samp{gdb a.out}, then the executable file
-@code{a.out} is the only active target.  If you designate a core file as
-well---presumably from a prior run that crashed and coredumped---then
-GDB has two active targets and will use them in tandem, looking
-first in the corefile target, then in the executable file, to satisfy
-requests for memory addresses.  (Typically, these two classes of target
-are complementary, since core files contain only a program's
-read-write memory---variables and so on---plus machine status, while
-executable files contain only the program text and initialized data.)
-
-When you type @code{run}, your executable file becomes an active process
-target as well.  When a process target is active, all GDB commands
-requesting memory addresses refer to that target; addresses in an active
-core file or executable file target are obscured while the process
-target is active.
-
-Use the @code{core-file} and @code{exec-file} commands to select a
-new core file or executable target (@pxref{Files, ,Commands to Specify
-Files}).  To specify as a target a process that is already running, use
-the @code{attach} command (@pxref{Attach, ,Debugging an
-Already-Running Process}.).
-
-@node Target Commands, Remote, Active Targets, Targets
-@section Commands for Managing Targets
-
-@table @code
-@item target @var{type} @var{parameters}
-Connects the GDB host environment to a target machine or process.  A
-target is typically a protocol for talking to debugging facilities.  You
-use the argument @var{type} to specify the type or protocol of the
-target machine.
-
-Further @var{parameters} are interpreted by the target protocol, but
-typically include things like device names or host names to connect
-with, process numbers, and baud rates.
-
-The @code{target} command will not repeat if you press @key{RET} again
-after executing the command.
-
-@item help target
-@kindex help target
-Displays the names of all targets available.  To display targets
-currently selected, use either @code{info target} or @code{info files}
-(@pxref{Files, ,Commands to Specify Files}).
-
-@item help target @var{name}
-Describe a particular target, including any parameters necessary to
-select it.
-@end table
-
-Here are some common targets (available, or not, depending on the GDB
-configuration):
-
-@table @code
-@item target exec @var{prog}
-@kindex target exec
-An executable file.  @samp{target exec @var{prog}} is the same as
-@samp{exec-file @var{prog}}.
-
-@item target core @var{filename}
-@kindex target core
-A core dump file.  @samp{target core @var{filename}} is the same as
-@samp{core-file @var{filename}}.
-
-@item target remote @var{dev}
-@kindex target remote
-Remote serial target in GDB-specific protocol.  The argument @var{dev}
-specifies what serial device to use for the connection (e.g.
-@file{/dev/ttya}). @xref{Remote, ,Remote Debugging}.
-
-@item target amd-eb @var{dev} @var{speed} @var{PROG}
-@kindex target amd-eb
-@cindex AMD EB29K
-Remote PC-resident AMD EB29K board, attached over serial lines.
-@var{dev} is the serial device, as for @code{target remote};
-@var{speed} allows you to specify the linespeed; and @var{PROG} is the
-name of the program to be debugged, as it appears to DOS on the PC.
-@xref{EB29K Remote, ,GDB with a Remote EB29K}.
-
-@item target nindy @var{devicename}
-@kindex target nindy
-An Intel 960 board controlled by a Nindy Monitor.  @var{devicename} is
-the name of the serial device to use for the connection, e.g.
-@file{/dev/ttya}.  @xref{i960-Nindy Remote, ,GDB with a Remote i960 (Nindy)}.
-
-@item target vxworks @var{machinename}
-@kindex target vxworks
-A VxWorks system, attached via TCP/IP.  The argument @var{machinename}
-is the target system's machine name or IP address.
-@xref{VxWorks Remote, ,GDB and VxWorks}.
-@end table
-
-Different targets are available on different configurations of GDB; your
-configuration may have more or fewer targets.
-
-@node Remote,  , Target Commands, Targets
-@section Remote Debugging
-@cindex remote debugging
-
-If you are trying to debug a program running on a machine that cannot run
-GDB in the usual way, it is often useful to use remote debugging.  For
-example, you might use remote debugging on an operating system kernel, or on
-a small system which does not have a general purpose operating system
-powerful enough to run a full-featured debugger.
-
-Some configurations of GDB have special serial or TCP/IP interfaces
-to make this work with particular debugging targets.  In addition,
-GDB comes with a generic serial protocol (specific to GDB, but
-not specific to any particular target system) which you can use if you
-write the remote stubs---the code that will run on the remote system to
-communicate with GDB.
-
-To use the GDB remote serial protocol, the program to be debugged on
-the remote machine needs to contain a debugging stub which talks to
-GDB over the serial line.  Several working remote stubs are
-distributed with GDB; see the @file{README} file in the GDB
-distribution for more information.
-
-For details of this communication protocol, see the comments in the
-GDB source file @file{remote.c}.
-
-To start remote debugging, first run GDB and specify as an executable file
-the program that is running in the remote machine.  This tells GDB how
-to find your program's symbols and the contents of its pure text.  Then
-establish communication using the @code{target remote} command with a device
-name as an argument.  For example:
-
-@example
-target remote /dev/ttyb
-@end example
-
-@noindent
-if the serial line is connected to the device named @file{/dev/ttyb}.  This
-will stop the remote machine if it is not already stopped.
-
-Now you can use all the usual commands to examine and change data and to
-step and continue the remote program.
-
-To resume the remote program and stop debugging it, use the @code{detach}
-command.
-
-Other remote targets may be available in your
-configuration of GDB; use @code{help targets} to list them.
-
-@menu
-* i960-Nindy Remote::          GDB with a Remote i960 (Nindy)
-* EB29K Remote::               GDB with a Remote EB29K
-* VxWorks Remote::             GDB and VxWorks
-@end menu
-@node i960-Nindy Remote, EB29K Remote, Remote, Remote
-@subsection GDB with a Remote i960 (Nindy)
-
-@cindex Nindy
-@cindex i960
-@dfn{Nindy} is a ROM Monitor program for Intel 960 target systems.  When
-GDB is configured to control a remote Intel 960 using Nindy, you can
-tell GDB how to connect to the 960 in several ways:
-
-@itemize @bullet
-@item
-Through command line options specifying serial port, version of the
-Nindy protocol, and communications speed;
-
-@item
-By responding to a prompt on startup;
-
-@item
-By using the @code{target} command at any point during your GDB
-session.  @xref{Target Commands, ,Commands for Managing Targets}.
-
-@end itemize
-
-@menu
-* Nindy Startup::               Startup with Nindy
-* Nindy Options::               Options for Nindy
-* Nindy reset::                 Nindy Reset Command
-@end menu
-
-@node Nindy Startup, Nindy Options, i960-Nindy Remote, i960-Nindy Remote
-@subsubsection Startup with Nindy
-
-If you simply start @code{gdb} without using any command-line
-options, you are prompted for what serial port to use, @emph{before} you
-reach the ordinary GDB prompt:
-
-@example
-Attach /dev/ttyNN -- specify NN, or "quit" to quit:  
-@end example
-
-@noindent
-Respond to the prompt with whatever suffix (after @samp{/dev/tty})
-identifies the serial port you want to use.  You can, if you choose,
-simply start up with no Nindy connection by responding to the prompt
-with an empty line.  If you do this, and later wish to attach to Nindy,
-use @code{target} (@pxref{Target Commands, ,Commands for Managing Targets}).
-
-@node Nindy Options, Nindy reset, Nindy Startup, i960-Nindy Remote
-@subsubsection Options for Nindy
-
-These are the startup options for beginning your GDB session with a
-Nindy-960 board attached:
-
-@table @code
-@item -r @var{port}
-Specify the serial port name of a serial interface to be used to connect
-to the target system.  This option is only available when GDB is
-configured for the Intel 960 target architecture.  You may specify
-@var{port} as any of: a full pathname (e.g. @samp{-r /dev/ttya}), a
-device name in @file{/dev} (e.g. @samp{-r ttya}), or simply the unique
-suffix for a specific @code{tty} (e.g. @samp{-r a}).
-
-@item -O
-(An uppercase letter ``O'', not a zero.)  Specify that GDB should use
-the ``old'' Nindy monitor protocol to connect to the target system.
-This option is only available when GDB is configured for the Intel 960
-target architecture.
-
-@quotation
-@emph{Warning:} if you specify @samp{-O}, but are actually trying to
-connect to a target system that expects the newer protocol, the connection
-will fail, appearing to be a speed mismatch.  GDB will repeatedly
-attempt to reconnect at several different line speeds.  You can abort
-this process with an interrupt.
-@end quotation
-
-@item -brk
-Specify that GDB should first send a @code{BREAK} signal to the target
-system, in an attempt to reset it, before connecting to a Nindy target.
-
-@quotation
-@emph{Warning:} Many target systems do not have the hardware that this
-requires; it only works with a few boards.
-@end quotation
-@end table
-
-The standard @samp{-b} option controls the line speed used on the serial
-port.
-
-@c @group
-@node Nindy reset,  , Nindy Options, i960-Nindy Remote
-@subsubsection Nindy Reset Command
-
-@table @code
-@item reset
-@kindex reset
-For a Nindy target, this command sends a ``break'' to the remote target
-system; this is only useful if the target has been equipped with a
-circuit to perform a hard reset (or some other interesting action) when
-a break is detected.
-@end table
-@c @end group
-
-@node EB29K Remote, VxWorks Remote, i960-Nindy Remote, Remote
-@subsection GDB with a Remote EB29K
-
-@cindex EB29K board
-@cindex running 29K programs
-
-To use GDB from a Unix system to run programs on AMD's EB29K
-board in a PC, you must first connect a serial cable between the PC
-and a serial port on the Unix system.  In the following, we assume
-you've hooked the cable between the PC's @file{COM1} port and
-@file{/dev/ttya} on the Unix system.
-
-@menu
-* Comms (EB29K)::               Communications Setup
-* gdb-EB29K::                   EB29K cross-debugging
-* Remote Log::                  Remote Log
-@end menu
-
-@node Comms (EB29K), gdb-EB29K, EB29K Remote, EB29K Remote
-@subsubsection Communications Setup
-
-The next step is to set up the PC's port, by doing something like the
-following in DOS on the PC:
-
-@example
-C:\> MODE com1:9600,n,8,1,none
-@end example
-
-@noindent
-This example---run on an MS DOS 4.0 system---sets the PC port to 9600
-bps, no parity, eight data bits, one stop bit, and no ``retry'' action;
-you must match the communications parameters when establishing the Unix
-end of the connection as well.
-@c FIXME: Who knows what this "no retry action" crud from the DOS manual may
-@c       mean?  It's optional; leave it out? ---pesch@cygnus.com, 25feb91 
-
-To give control of the PC to the Unix side of the serial line, type
-the following at the DOS console:
-
-@example
-C:\> CTTY com1
-@end example
-
-@noindent
-(Later, if you wish to return control to the DOS console, you can use
-the command @code{CTTY con}---but you must send it over the device that
-had control, in our example over the @file{COM1} serial line).
-
-From the Unix host, use a communications program such as @code{tip} or
-@code{cu} to communicate with the PC; for example,
-
-@example
-cu -s 9600 -l /dev/ttya
-@end example
-
-@noindent
-The @code{cu} options shown specify, respectively, the linespeed and the
-serial port to use.  If you use @code{tip} instead, your command line
-may look something like the following:
-
-@example
-tip -9600 /dev/ttya
-@end example
-
-@noindent
-Your system may define a different name where our example uses
-@file{/dev/ttya} as the argument to @code{tip}.  The communications
-parameters, including which port to use, are associated with the
-@code{tip} argument in the ``remote'' descriptions file---normally the
-system table @file{/etc/remote}.
-@c FIXME: What if anything needs doing to match the "n,8,1,none" part of
-@c the DOS side's comms setup?  cu can support -o (odd
-@c parity), -e (even parity)---apparently no settings for no parity or
-@c for character size.  Taken from stty maybe...?  John points out tip
-@c can set these as internal variables, eg ~s parity=none; man stty
-@c suggests that it *might* work to stty these options with stdin or
-@c stdout redirected... ---pesch@cygnus.com, 25feb91
-
-@kindex EBMON
-Using the @code{tip} or @code{cu} connection, change the DOS working
-directory to the directory containing a copy of your 29K program, then
-start the PC program @code{EBMON} (an EB29K control program supplied
-with your board by AMD).  You should see an initial display from
-@code{EBMON} similar to the one that follows, ending with the
-@code{EBMON} prompt @samp{#}---
-
-@example
-C:\> G:
-
-G:\> CD \usr\joe\work29k
-
-G:\USR\JOE\WORK29K> EBMON
-Am29000 PC Coprocessor Board Monitor, version 3.0-18
-Copyright 1990 Advanced Micro Devices, Inc.
-Written by Gibbons and Associates, Inc.
-
-Enter '?' or 'H' for help
-
-PC Coprocessor Type   = EB29K
-I/O Base              = 0x208
-Memory Base           = 0xd0000
-
-Data Memory Size      = 2048KB
-Available I-RAM Range = 0x8000 to 0x1fffff
-Available D-RAM Range = 0x80002000 to 0x801fffff
-
-PageSize              = 0x400
-Register Stack Size   = 0x800
-Memory Stack Size     = 0x1800
-
-CPU PRL               = 0x3
-Am29027 Available     = No
-Byte Write Available  = Yes
-
-# ~.
-@end example
-
-Then exit the @code{cu} or @code{tip} program (done in the example by
-typing @code{~.} at the @code{EBMON} prompt).  @code{EBMON} will keep
-running, ready for GDB to take over.
-
-For this example, we've assumed what is probably the most convenient
-way to make sure the same 29K program is on both the PC and the Unix
-system: a PC/NFS connection that establishes ``drive @code{G:}'' on the
-PC as a file system on the Unix host.  If you do not have PC/NFS or
-something similar connecting the two systems, you must arrange some
-other way---perhaps floppy-disk transfer---of getting the 29K program
-from the Unix system to the PC; GDB will @emph{not} download it over the
-serial line.
-
-@node gdb-EB29K, Remote Log, Comms (EB29K), EB29K Remote
-@subsubsection EB29K cross-debugging
-
-Finally, @code{cd} to the directory containing an image of your 29K
-program on the Unix system, and start GDB---specifying as argument the
-name of your 29K program:
-
-@example
-cd /usr/joe/work29k
-gdb myfoo
-@end example
-
-Now you can use the @code{target} command:
-
-@example
-target amd-eb /dev/ttya 9600 MYFOO
-@c FIXME: test above 'target amd-eb' as spelled, with caps!  caps are meant to
-@c emphasize that this is the name as seen by DOS (since I think DOS is
-@c single-minded about case of letters).  ---pesch@cygnus.com, 25feb91
-@end example
-
-@noindent
-In this example, we've assumed your program is in a file called
-@file{myfoo}.  Note that the filename given as the last argument to
-@code{target amd-eb} should be the name of the program as it appears to DOS.
-In our example this is simply @code{MYFOO}, but in general it can include
-a DOS path, and depending on your transfer mechanism may not resemble
-the name on the Unix side.
-
-At this point, you can set any breakpoints you wish; when you are ready
-to see your program run on the 29K board, use the GDB command
-@code{run}.
-
-To stop debugging the remote program, use the GDB @code{detach}
-command.
-
-To return control of the PC to its console, use @code{tip} or @code{cu}
-once again, after your GDB session has concluded, to attach to
-@code{EBMON}.  You can then type the command @code{q} to shut down
-@code{EBMON}, returning control to the DOS command-line interpreter.
-Type @code{CTTY con} to return command input to the main DOS console,
-and type @kbd{~.} to leave @code{tip} or @code{cu}.
-
-@node Remote Log,  , gdb-EB29K, EB29K Remote
-@subsubsection Remote Log
-@kindex eb.log
-@cindex log file for EB29K
-
-The @code{target amd-eb} command creates a file @file{eb.log} in the
-current working directory, to help debug problems with the connection.
-@file{eb.log} records all the output from @code{EBMON}, including echoes
-of the commands sent to it.  Running @samp{tail -f} on this file in
-another window often helps to understand trouble with @code{EBMON}, or
-unexpected events on the PC side of the connection.
-
-@node VxWorks Remote,  , EB29K Remote, Remote
-@subsection GDB and VxWorks
-@cindex VxWorks
-
-GDB enables developers to spawn and debug tasks running on networked
-VxWorks targets from a Unix host.  Already-running tasks spawned from
-the VxWorks shell can also be debugged.  GDB uses code that runs on
-both the UNIX host and on the VxWorks target.  The program
-@code{gdb} is installed and executed on the UNIX host.
-
-The following information on connecting to VxWorks was current when
-this manual was produced; newer releases of VxWorks may use revised
-procedures.
-
-The remote debugging interface (RDB) routines are installed and executed
-on the VxWorks target.  These routines are included in the VxWorks library
-@file{rdb.a} and are incorporated into the system image when source-level
-debugging is enabled in the VxWorks configuration.
-
-@kindex INCLUDE_RDB
-If you wish, you can define @code{INCLUDE_RDB} in the VxWorks
-configuration file @file{configAll.h} to include the RDB interface
-routines and spawn the source debugging task @code{tRdbTask} when
-VxWorks is booted.  For more information on configuring and remaking
-VxWorks, see the manufacturer's manual.
-
-Once you have included the RDB interface in your VxWorks system image
-and set your Unix execution search path to find GDB, you are ready
-to run GDB.  From your UNIX host, type:
-
-@smallexample
-% gdb
-@end smallexample
-
-GDB will come up showing the prompt:
-
-@smallexample
-(gdb)
-@end smallexample
-
-@menu
-* VxWorks connection::          Connecting to VxWorks
-* VxWorks download::            VxWorks Download
-* VxWorks attach::              Running Tasks
-@end menu
-
-@node VxWorks connection, VxWorks download, VxWorks Remote, VxWorks Remote
-@subsubsection Connecting to VxWorks
-
-The GDB command @code{target} lets you connect to a VxWorks target on the
-network.  To connect to a target whose host name is ``@code{tt}'', type:
-
-@smallexample
-(gdb) target vxworks tt
-@end smallexample
-
-GDB will display a message similar to the following:
-
-@smallexample
-Attaching remote machine across net... Success!
-@end smallexample
-
-GDB will then attempt to read the symbol tables of any object modules
-loaded into the VxWorks target since it was last booted.  GDB locates
-these files by searching the directories listed in the command search
-path (@pxref{Environment, ,Your Program's Environment}); if it fails
-to find an object file, it will display a message such as:
-
-@smallexample
-prog.o: No such file or directory.
-@end smallexample
-
-This will cause the @code{target} command to abort.  When this happens,
-you should add the appropriate directory to the search path, with the
-GDB command @code{path}, and execute the @code{target} command
-again.
-
-@node VxWorks download, VxWorks attach, VxWorks connection, VxWorks Remote
-@subsubsection VxWorks Download
-
-@cindex download to VxWorks
-If you have connected to the VxWorks target and you want to debug an
-object that has not yet been loaded, you can use the GDB @code{load}
-command to download a file from UNIX to VxWorks incrementally.  The
-object file given as an argument to the @code{load} command is actually
-opened twice: first by the VxWorks target in order to download the code,
-then by GDB in order to read the symbol table.  This can lead to
-problems if the current working directories on the two systems differ.
-It is simplest to set the working directory on both systems to the
-directory in which the object file resides, and then to reference the
-file by its name, without any path.  Thus, to load a program
-@file{prog.o}, residing in @file{wherever/vw/demo/rdb}, on VxWorks type:
-
-@smallexample
--> cd "wherever/vw/demo/rdb"
-@end smallexample
-
-On GDB type:
-
-@smallexample
-(gdb) cd wherever/vw/demo/rdb 
-(gdb) load prog.o
-@end smallexample
-
-GDB will display a response similar to the following:
-
-@smallexample
-Reading symbol data from wherever/vw/demo/rdb/prog.o... done.
-@end smallexample
-
-You can also use the @code{load} command to reload an object module
-after editing and recompiling the corresponding source file.  Note that
-this will cause GDB to delete all currently-defined breakpoints,
-auto-displays, and convenience variables, and to clear the value
-history.  (This is necessary in order to preserve the integrity of
-debugger data structures that reference the target system's symbol
-table.)
-
-@node VxWorks attach,  , VxWorks download, VxWorks Remote
-@subsubsection Running Tasks
-
-@cindex running VxWorks tasks
-You can also attach to an existing task using the @code{attach} command as
-follows:
-
-@smallexample
-(gdb) attach @var{task}
-@end smallexample
-
-@noindent
-where @var{task} is the VxWorks hexadecimal task ID.  The task can be running
-or suspended when you attach to it.  If running, it will be suspended at
-the time of attachment.
-
-
-@node Controlling GDB, Sequences, Targets, Top
-@chapter Controlling GDB
-
-You can alter many aspects of GDB's interaction with you by using
-the @code{set} command.  For commands controlling how GDB displays
-data, @pxref{Print Settings, ,Print Settings}; other settings are described here.
-
-@menu
-* Prompt::                      Prompt
-* Editing::                     Command Editing
-* History::                     Command History
-* Screen Size::                 Screen Size
-* Numbers::                     Numbers
-* Messages/Warnings::           Optional Warnings and Messages
-@end menu
-
-@node Prompt, Editing, Controlling GDB, Controlling GDB
-@section Prompt
-@cindex prompt
-
-GDB indicates its readiness to read a command by printing a string
-called the @dfn{prompt}.  This string is normally @samp{(gdb)}.  You
-can change the prompt string with the @code{set prompt} command.  For
-instance, when debugging GDB with GDB, it is useful to change
-the prompt in one of the GDBs so that you can always tell which
-one you are talking to.
-
-@table @code
-@item set prompt @var{newprompt}
-@kindex set prompt
-Directs GDB to use @var{newprompt} as its prompt string henceforth.
-@kindex show prompt
-@item show prompt
-Prints a line of the form: @samp{Gdb's prompt is: @var{your-prompt}}
-@end table
-
-@node Editing, History, Prompt, Controlling GDB
-@section Command Editing
-@cindex readline
-@cindex command line editing
-
-GDB reads its input commands via the @dfn{readline} interface.  This
-GNU library provides consistent behavior for programs which provide a
-command line interface to the user.  Advantages are @code{emacs}-style
-or @code{vi}-style inline editing of commands, @code{csh}-like history
-substitution, and a storage and recall of command history across
-debugging sessions.
-
-You may control the behavior of command line editing in GDB with the
-command @code{set}.
-
-@table @code
-@kindex set editing
-@cindex editing
-@item set editing
-@itemx set editing on
-Enable command line editing (enabled by default).
-
-@item set editing off
-Disable command line editing.
-
-@kindex show editing
-@item show editing
-Show whether command line editing is enabled.
-@end table
-
-@node History, Screen Size, Editing, Controlling GDB
-@section Command History
-
-@table @code
-@cindex history substitution
-@cindex history file
-@kindex set history filename
-@item set history filename @var{fname}
-Set the name of the GDB command history file to @var{fname}.  This is
-the file from which GDB will read an initial command history
-list or to which it will write this list when it exits.  This list is
-accessed through history expansion or through the history
-command editing characters listed below.  This file defaults to the
-value of the environment variable @code{GDBHISTFILE}, or to
-@file{./.gdb_history} if this variable is not set.
-
-@cindex history save
-@kindex set history save
-@item set history save
-@itemx set history save on
-Record command history in a file, whose name may be specified with the
-@code{set history filename} command.  By default, this option is disabled.
-
-@item set history save off
-Stop recording command history in a file.
-
-@cindex history size
-@kindex set history size
-@item set history size @var{size}
-Set the number of commands which GDB will keep in its history list.
-This defaults to the value of the environment variable
-@code{HISTSIZE}, or to 256 if this variable is not set.
-@end table
-
-@cindex history expansion
-History expansion assigns special meaning to the character @kbd{!}.
-@iftex
-@xref{Event Designators}.
-@end iftex
-Since @kbd{!} is also the logical not operator in C, history expansion
-is off by default. If you decide to enable history expansion with the
-@code{set history expansion on} command, you may sometimes need to
-follow @kbd{!} (when it is used as logical not, in an expression) with
-a space or a tab to prevent it from being expanded.  The readline
-history facilities will not attempt substitution on the strings
-@kbd{!=} and @kbd{!(}, even when history expansion is enabled.
-
-The commands to control history expansion are:
-
-@table @code
-
-@kindex set history expansion
-@item set history expansion on
-@itemx set history expansion
-Enable history expansion.  History expansion is off by default.
-
-@item set history expansion off
-Disable history expansion.
-
-The readline code comes with more complete documentation of
-editing and history expansion features.  Users unfamiliar with @code{emacs}
-or @code{vi} may wish to read it.
-@iftex
-@xref{Command Line Editing}.
-@end iftex
-
-@c @group
-@kindex show history
-@item show history
-@itemx show history filename
-@itemx show history save
-@itemx show history size
-@itemx show history expansion
-These commands display the state of the GDB history parameters.
-@code{show history} by itself displays all four states.
-@c @end group
-@end table
-
-@table @code
-@kindex show commands
-@item show commands
-Display the last ten commands in the command history.
-
-@item show commands @var{n}
-Print ten commands centered on command number @var{n}.
-
-@item show commands +
-Print ten commands just after the commands last printed.
-@end table
-
-@node Screen Size, Numbers, History, Controlling GDB
-@section Screen Size
-@cindex size of screen
-@cindex pauses in output
-
-Certain commands to GDB may produce large amounts of information
-output to the screen.  To help you read all of it, GDB pauses and
-asks you for input at the end of each page of output.  Type @key{RET}
-when you want to continue the output.  GDB also uses the screen
-width setting to determine when to wrap lines of output.  Depending on
-what is being printed, it tries to break the line at a readable place,
-rather than simply letting it overflow onto the following line.
-
-Normally GDB knows the size of the screen from the termcap data base
-together with the value of the @code{TERM} environment variable and the
-@code{stty rows} and @code{stty cols} settings. If this is not correct,
-you can override it with the @code{set height} and @code{set
-width} commands:
-
-@table @code
-@item set height @var{lpp}
-@itemx show height
-@itemx set width @var{cpl}
-@itemx show width
-@kindex set height
-@kindex set width
-@kindex show width
-@kindex show height
-These @code{set} commands specify a screen height of @var{lpp} lines and
-a screen width of @var{cpl} characters.  The associated @code{show}
-commands display the current settings.
-
-If you specify a height of zero lines, GDB will not pause during output
-no matter how long the output is.  This is useful if output is to a file
-or to an editor buffer.
-@end table
-
-@node Numbers, Messages/Warnings, Screen Size, Controlling GDB
-@section Numbers
-@cindex number representation
-@cindex entering numbers
-
-You can always enter numbers in octal, decimal, or hexadecimal in GDB by
-the usual conventions: octal numbers begin with @samp{0}, decimal
-numbers end with @samp{.}, and hexadecimal numbers begin with @samp{0x}.
-Numbers that begin with none of these are, by default, entered in base
-10; likewise, the default display for numbers---when no particular
-format is specified---is base 10.  You can change the default base for
-both input and output with the @code{set radix} command.
-
-@table @code
-@kindex set radix
-@item set radix @var{base}
-Set the default base for numeric input and display.  Supported choices
-for @var{base} are decimal 2, 8, 10, 16.  @var{base} must itself be
-specified either unambiguously or using the current default radix; for
-example, any of
-
-@example
-set radix 1010
-set radix 012
-set radix 10.
-set radix 0xa
-@end example
-
-@noindent
-will set the base to decimal.  On the other hand, @samp{set radix 10}
-will leave the radix unchanged no matter what it was.
-
-@kindex show radix
-@item show radix
-Display the current default base for numeric input and display.
-@end table
-
-@node Messages/Warnings,  , Numbers, Controlling GDB
-@section Optional Warnings and Messages
-
-By default, GDB is silent about its inner workings.  If you are running
-on a slow machine, you may want to use the @code{set verbose} command.
-It will make GDB tell you when it does a lengthy internal operation, so
-you will not think it has crashed.
-
-Currently, the messages controlled by @code{set verbose} are those
-which announce that the symbol table for a source file is being read
-(@pxref{Files, ,Commands to Specify Files}, in the description of the
-command @code{symbol-file}).
-@c The following is the right way to do it, but emacs 18.55 does not support
-@c @ref, and neither the emacs lisp manual version of texinfmt or makeinfo
-@c is released.
-@ignore
-see @code{symbol-file} in @ref{Files, ,Commands to Specify Files}).
-@end ignore
-
-@table @code
-@kindex set verbose
-@item set verbose on
-Enables GDB's output of certain informational messages.
-
-@item set verbose off
-Disables GDB's output of certain informational messages.
-
-@kindex show verbose
-@item show verbose
-Displays whether @code{set verbose} is on or off.
-@end table
-
-By default, if GDB encounters bugs in the symbol table of an object
-file, it is silent; but if you are debugging a compiler, you may find
-this information useful (@pxref{Symbol Errors, ,Errors Reading Symbol Files}).
-
-@table @code
-@kindex set complaints
-@item set complaints @var{limit}
-Permits GDB to output @var{limit} complaints about each type of unusual
-symbols before becoming silent about the problem.  Set @var{limit} to
-zero to suppress all complaints; set it to a large number to prevent
-complaints from being suppressed.
-
-@kindex show complaints
-@item show complaints
-Displays how many symbol complaints GDB is permitted to produce.
-@end table
-
-By default, GDB is cautious, and asks what sometimes seem to be a
-lot of stupid questions to confirm certain commands.  For example, if
-you try to run a program which is already running:
-
-@example
-(gdb) run
-The program being debugged has been started already.
-Start it from the beginning? (y or n)
-@end example
-
-If you are willing to unflinchingly face the consequences of your own
-commands, you can disable this ``feature'':
-
-@table @code
-@kindex set confirm
-@cindex flinching
-@cindex confirmation
-@cindex stupid questions
-@item set confirm off
-Disables confirmation requests.
-
-@item set confirm on
-Enables confirmation requests (the default).
-
-@item show confirm
-@kindex show confirm
-Displays state of confirmation requests.
-@end table
-
-@c FIXME this does not really belong here.  But where *does* it belong?
-@cindex reloading symbols
-Some systems allow individual object files that make up your program to
-be replaced without stopping and restarting your program.
-For example, in VxWorks you can simply recompile a defective object file
-and keep on running.
-If you are running on one of these systems, you can allow GDB to
-reload the symbols for automatically relinked modules:
-
-@table @code
-@kindex set symbol-reloading
-@item set symbol-reloading on
-Replace symbol definitions for the corresponding source file when an
-object file with a particular name is seen again.
-
-@item set symbol-reloading off
-Do not replace symbol definitions when re-encountering object files of
-the same name.  This is the default state; if you are not running on a
-system that permits automatically relinking modules, you should leave
-@code{symbol-reloading} off, since otherwise GDB may discard symbols
-when linking large programs, that may contain several modules (from
-different directories or libraries) with the same name.
-
-@item show symbol-reloading
-Show the current @code{on} or @code{off} setting.
-@end table
-
-@node Sequences, Emacs, Controlling GDB, Top
-@chapter Canned Sequences of Commands
-
-Aside from breakpoint commands (@pxref{Break Commands, ,Breakpoint
-Command Lists}), GDB provides two ways to store sequences of commands
-for execution as a unit: user-defined commands and command files.
-
-@menu
-* Define::                      User-Defined Commands
-* Command Files::               Command Files
-* Output::                      Commands for Controlled Output
-@end menu
-
-@node Define, Command Files, Sequences, Sequences
-@section User-Defined Commands
-
-@cindex user-defined command
-A @dfn{user-defined command} is a sequence of GDB commands to which you
-assign a new name as a command.  This is done with the @code{define}
-command.
-
-@table @code
-@item define @var{commandname}
-@kindex define
-Define a command named @var{commandname}.  If there is already a command
-by that name, you are asked to confirm that you want to redefine it.
-
-The definition of the command is made up of other GDB command lines,
-which are given following the @code{define} command.  The end of these
-commands is marked by a line containing @code{end}.
-
-@item document @var{commandname}
-@kindex document
-Give documentation to the user-defined command @var{commandname}.  The
-command @var{commandname} must already be defined.  This command reads
-lines of documentation just as @code{define} reads the lines of the
-command definition, ending with @code{end}.  After the @code{document}
-command is finished, @code{help} on command @var{commandname} will print
-the documentation you have specified.
-
-You may use the @code{document} command again to change the
-documentation of a command.  Redefining the command with @code{define}
-does not change the documentation.
-
-@item help user-defined
-@kindex help user-defined
-List all user-defined commands, with the first line of the documentation
-(if any) for each.
-
-@item info user
-@itemx info user @var{commandname}
-@kindex info user
-Display the GDB commands used to define @var{commandname} (but not its
-documentation).  If no @var{commandname} is given, display the
-definitions for all user-defined commands.
-@end table
-
-User-defined commands do not take arguments.  When they are executed, the
-commands of the definition are not printed.  An error in any command
-stops execution of the user-defined command.
-
-Commands that would ask for confirmation if used interactively proceed
-without asking when used inside a user-defined command.  Many GDB commands
-that normally print messages to say what they are doing omit the messages
-when used in a user-defined command.
-
-@node Command Files, Output, Define, Sequences
-@section Command Files
-
-@cindex command files
-A command file for GDB is a file of lines that are GDB commands.  Comments
-(lines starting with @kbd{#}) may also be included.  An empty line in a
-command file does nothing; it does not mean to repeat the last command, as
-it would from the terminal.
-
-@cindex init file
-@cindex @file{.gdbinit}
-When you start GDB, it automatically executes commands from its
-@dfn{init files}.  These are files named @file{.gdbinit}.  GDB reads
-the init file (if any) in your home directory and then the init file
-(if any) in the current working directory.  (The init files are not
-executed if you use the @samp{-nx} option; @pxref{Mode Options,
-,Choosing Modes}.)  You can also request the execution of a command
-file with the @code{source} command:
-
-@table @code
-@item source @var{filename}
-@kindex source
-Execute the command file @var{filename}.
-@end table
-
-The lines in a command file are executed sequentially.  They are not
-printed as they are executed.  An error in any command terminates execution
-of the command file.
-
-Commands that would ask for confirmation if used interactively proceed
-without asking when used in a command file.  Many GDB commands that
-normally print messages to say what they are doing omit the messages
-when called from command files.
-
-@node Output,  , Command Files, Sequences
-@section Commands for Controlled Output
-
-During the execution of a command file or a user-defined command, normal
-GDB output is suppressed; the only output that appears is what is
-explicitly printed by the commands in the definition.  This section
-describes three commands useful for generating exactly the output you
-want.
-
-@table @code
-@item echo @var{text}
-@kindex echo
-@c I do not consider backslash-space a standard C escape sequence
-@c because it is not in ANSI.
-Print @var{text}.  Nonprinting characters can be included in
-@var{text} using C escape sequences, such as @samp{\n} to print a
-newline.  @strong{No newline will be printed unless you specify one.}
-In addition to the standard C escape sequences, a backslash followed
-by a space stands for a space.  This is useful for outputting a
-string with spaces at the beginning or the end, since leading and
-trailing spaces are otherwise trimmed from all arguments.  
-To print @samp{@w{ }and foo =@w{ }}, use the command
-@samp{echo \@w{ }and foo = \@w{ }}.
-
-A backslash at the end of @var{text} can be used, as in C, to continue
-the command onto subsequent lines.  For example,
-
-@example
-echo This is some text\n\
-which is continued\n\
-onto several lines.\n
-@end example
-
-produces the same output as
-
-@example
-echo This is some text\n
-echo which is continued\n
-echo onto several lines.\n
-@end example
-
-@item output @var{expression}
-@kindex output
-Print the value of @var{expression} and nothing but that value: no
-newlines, no @samp{$@var{nn} = }.  The value is not entered in the
-value history either.  @xref{Expressions, ,Expressions}, for more information on
-expressions.
-
-@item output/@var{fmt} @var{expression}
-Print the value of @var{expression} in format @var{fmt}.  You can use
-the same formats as for @code{print}; @pxref{Output formats}, for more
-information.
-
-@item printf @var{string}, @var{expressions}@dots{}
-@kindex printf
-Print the values of the @var{expressions} under the control of
-@var{string}.  The @var{expressions} are separated by commas and may
-be either numbers or pointers.  Their values are printed as specified
-by @var{string}, exactly as if your program were to execute
-
-@example
-printf (@var{string}, @var{expressions}@dots{});
-@end example
-
-For example, you can print two values in hex like this:
-
-@example
-printf "foo, bar-foo = 0x%x, 0x%x\n", foo, bar-foo
-@end example
-
-The only backslash-escape sequences that you can use in the format
-string are the simple ones that consist of backslash followed by a
-letter.
-@end table
-
-@node Emacs, GDB Bugs, Sequences, Top
-@chapter Using GDB under GNU Emacs
-
-@cindex emacs
-A special interface allows you to use GNU Emacs to view (and
-edit) the source files for the program you are debugging with
-GDB.
-
-To use this interface, use the command @kbd{M-x gdb} in Emacs.  Give the
-executable file you want to debug as an argument.  This command starts
-GDB as a subprocess of Emacs, with input and output through a newly
-created Emacs buffer.
-
-Using GDB under Emacs is just like using GDB normally except for two
-things:
-
-@itemize @bullet
-@item
-All ``terminal'' input and output goes through the Emacs buffer.
-@end itemize
-
-This applies both to GDB commands and their output, and to the input
-and output done by the program you are debugging.
-
-This is useful because it means that you can copy the text of previous
-commands and input them again; you can even use parts of the output
-in this way.
-
-All the facilities of Emacs' Shell mode are available for interacting
-with your program.  In particular, you can send signals the usual
-way---for example, @kbd{C-c C-c} for an interrupt, @kbd{C-c C-z} for a
-stop.
-
-@itemize @bullet
-@item
-GDB displays source code through Emacs.
-@end itemize
-
-Each time GDB displays a stack frame, Emacs automatically finds the
-source file for that frame and puts an arrow (@samp{=>}) at the
-left margin of the current line.  Emacs uses a separate buffer for
-source display, and splits the window to show both your GDB session
-and the source.
-
-Explicit GDB @code{list} or search commands still produce output as
-usual, but you probably will have no reason to use them.
-
-@quotation
-@emph{Warning:} If the directory where your program resides is not your
-current directory, it can be easy to confuse Emacs about the location of
-the source files, in which case the auxiliary display buffer will not
-appear to show your source.  GDB can find programs by searching your
-environment's @code{PATH} variable, so the GDB input and output
-session will proceed normally; but Emacs does not get enough information
-back from GDB to locate the source files in this situation.  To
-avoid this problem, either start GDB mode from the directory where
-your program resides, or specify a full path name when prompted for the
-@kbd{M-x gdb} argument.
-
-A similar confusion can result if you use the GDB @code{file} command to
-switch to debugging a program in some other location, from an existing
-GDB buffer in Emacs.
-@end quotation
-
-By default, @kbd{M-x gdb} calls the program called @file{gdb}.  If
-you need to call GDB by a different name (for example, if you keep
-several configurations around, with different names) you can set the
-Emacs variable @code{gdb-command-name}; for example,
-
-@example
-(setq gdb-command-name "mygdb")
-@end example
-
-@noindent
-(preceded by @kbd{ESC ESC}, or typed in the @code{*scratch*} buffer, or
-in your @file{.emacs} file) will make Emacs call the program named
-``@code{mygdb}'' instead.
-
-In the GDB I/O buffer, you can use these special Emacs commands in
-addition to the standard Shell mode commands:
-
-@table @kbd
-@item C-h m
-Describe the features of Emacs' GDB Mode.
-
-@item M-s
-Execute to another source line, like the GDB @code{step} command; also
-update the display window to show the current file and location.
-
-@item M-n
-Execute to next source line in this function, skipping all function
-calls, like the GDB @code{next} command.  Then update the display window
-to show the current file and location.
-
-@item M-i
-Execute one instruction, like the GDB @code{stepi} command; update
-display window accordingly.
-
-@item M-x gdb-nexti
-Execute to next instruction, using the GDB @code{nexti} command; update
-display window accordingly.
-
-@item C-c C-f
-Execute until exit from the selected stack frame, like the GDB
-@code{finish} command.
-
-@item M-c
-Continue execution of your program, like the GDB @code{continue}
-command.
-
-@emph{Warning:} In Emacs v19, this command is @kbd{C-c C-p}.
-
-@item M-u
-Go up the number of frames indicated by the numeric argument
-(@pxref{Arguments, , Numeric Arguments, emacs, The GNU Emacs Manual}),
-like the GDB @code{up} command.
-
-@emph{Warning:} In Emacs v19, this command is @kbd{C-c C-u}.
-
-@item M-d
-Go down the number of frames indicated by the numeric argument, like the
-GDB @code{down} command.
-
-@emph{Warning:} In Emacs v19, this command is @kbd{C-c C-d}.
-
-@item C-x &
-Read the number where the cursor is positioned, and insert it at the end
-of the GDB I/O buffer.  For example, if you wish to disassemble code
-around an address that was displayed earlier, type @kbd{disassemble};
-then move the cursor to the address display, and pick up the
-argument for @code{disassemble} by typing @kbd{C-x &}.
-
-You can customize this further on the fly by defining elements of the list
-@code{gdb-print-command}; once it is defined, you can format or
-otherwise process numbers picked up by @kbd{C-x &} before they are
-inserted.  A numeric argument to @kbd{C-x &} will both indicate that you
-wish special formatting, and act as an index to pick an element of the
-list.  If the list element is a string, the number to be inserted is
-formatted using the Emacs function @code{format}; otherwise the number
-is passed as an argument to the corresponding list element.
-@end table
-
-In any source file, the Emacs command @kbd{C-x SPC} (@code{gdb-break})
-tells GDB to set a breakpoint on the source line point is on.
-
-If you accidentally delete the source-display buffer, an easy way to get
-it back is to type the command @code{f} in the GDB buffer, to
-request a frame display; when you run under Emacs, this will recreate
-the source buffer if necessary to show you the context of the current
-frame.
-
-The source files displayed in Emacs are in ordinary Emacs buffers
-which are visiting the source files in the usual way.  You can edit
-the files with these buffers if you wish; but keep in mind that GDB
-communicates with Emacs in terms of line numbers.  If you add or
-delete lines from the text, the line numbers that GDB knows will cease
-to correspond properly to the code.
-
-@c The following dropped because Epoch is nonstandard.  Reactivate
-@c if/when v19 does something similar. ---pesch@cygnus.com 19dec1990
-@ignore
-@kindex emacs epoch environment
-@kindex epoch
-@kindex inspect
-
-Version 18 of Emacs has a built-in window system called the @code{epoch}
-environment.  Users of this environment can use a new command,
-@code{inspect} which performs identically to @code{print} except that
-each value is printed in its own window.
-@end ignore
-
-@node GDB Bugs, Renamed Commands, Emacs, Top
-@chapter Reporting Bugs in GDB
-@cindex Bugs in GDB
-@cindex Reporting Bugs in GDB
-
-Your bug reports play an essential role in making GDB reliable.
-
-Reporting a bug may help you by bringing a solution to your problem, or it
-may not.  But in any case the principal function of a bug report is to help
-the entire community by making the next version of GDB work better.  Bug
-reports are your contribution to the maintenance of GDB.
-
-In order for a bug report to serve its purpose, you must include the
-information that enables us to fix the bug.
-
-@menu
-* Bug Criteria::                Have You Found a Bug?
-* Bug Reporting::               How to Report Bugs
-@end menu
-
-@node Bug Criteria, Bug Reporting, GDB Bugs, GDB Bugs
-@section Have You Found a Bug?
-@cindex Bug Criteria
-
-If you are not sure whether you have found a bug, here are some guidelines:
-
-@itemize @bullet
-@item
-@cindex Fatal Signal
-@cindex Core Dump
-If the debugger gets a fatal signal, for any input whatever, that is a
-GDB bug.  Reliable debuggers never crash.
-
-@item
-@cindex error on Valid Input
-If GDB produces an error message for valid input, that is a bug.
-
-@item
-@cindex Invalid Input
-If GDB does not produce an error message for invalid input,
-that is a bug.  However, you should note that your idea of
-``invalid input'' might be our idea of ``an extension'' or ``support
-for traditional practice''.
-
-@item
-If you are an experienced user of debugging tools, your suggestions
-for improvement of GDB are welcome in any case.
-@end itemize
-
-@node Bug Reporting,  , Bug Criteria, GDB Bugs
-@section How to Report Bugs
-@cindex Bug Reports
-@cindex GDB Bugs, Reporting
-
-A number of companies and individuals offer support for GNU products.
-If you obtained GDB from a support organization, we recommend you
-contact that organization first.
-
-Contact information for many support companies and individuals is
-available in the file @file{etc/SERVICE} in the GNU Emacs distribution.
-
-In any event, we also recommend that you send bug reports for GDB to one
-of these addresses:
-
-@example
-bug-gdb@@prep.ai.mit.edu
-@{ucbvax|mit-eddie|uunet@}!prep.ai.mit.edu!bug-gdb
-@end example
-
-@strong{Do not send bug reports to @samp{info-gdb}, or to
-@samp{help-gdb}, or to any newsgroups.} Most users of GDB do not want to
-receive bug reports.  Those that do, have arranged to receive @samp{bug-gdb}.
-
-The mailing list @samp{bug-gdb} has a newsgroup @samp{gnu.gdb.bug} which
-serves as a repeater.  The mailing list and the newsgroup carry exactly
-the same messages.  Often people think of posting bug reports to the
-newsgroup instead of mailing them.  This appears to work, but it has one
-problem which can be crucial: a newsgroup posting often lacks a mail
-path back to the sender.  Thus, if we need to ask for more information,
-we may be unable to reach you.  For this reason, it is better to send
-bug reports to the mailing list.
-
-As a last resort, send bug reports on paper to:
-
-@example
-GNU Debugger Bugs
-Free Software Foundation
-545 Tech Square
-Cambridge, MA 02139
-@end example
-
-The fundamental principle of reporting bugs usefully is this:
-@strong{report all the facts}.  If you are not sure whether to state a
-fact or leave it out, state it!
-
-Often people omit facts because they think they know what causes the
-problem and assume that some details do not matter.  Thus, you might
-assume that the name of the variable you use in an example does not matter.
-Well, probably it does not, but one cannot be sure.  Perhaps the bug is a
-stray memory reference which happens to fetch from the location where that
-name is stored in memory; perhaps, if the name were different, the contents
-of that location would fool the debugger into doing the right thing despite
-the bug.  Play it safe and give a specific, complete example.  That is the
-easiest thing for you to do, and the most helpful.
-
-Keep in mind that the purpose of a bug report is to enable us to fix
-the bug if it is new to us.  It is not as important as what happens if
-the bug is already known.  Therefore, always write your bug reports on
-the assumption that the bug has not been reported previously.
-
-Sometimes people give a few sketchy facts and ask, ``Does this ring a
-bell?''  Those bug reports are useless, and we urge everyone to
-@emph{refuse to respond to them} except to chide the sender to report
-bugs properly.
-
-To enable us to fix the bug, you should include all these things:
-
-@itemize @bullet
-@item
-The version of GDB.  GDB announces it if you start with no
-arguments; you can also print it at any time using @code{show version}.
-
-Without this, we will not know whether there is any point in looking for
-the bug in the current version of GDB.
-
-@item
-The type of machine you are using, and the operating system name and
-version number.
-
-@item
-What compiler (and its version) was used to compile GDB---e.g.
-``gcc-2.0''.
-
-@item
-What compiler (and its version) was used to compile the program you
-are debugging---e.g.  ``gcc-2.0''.
-
-@item
-The command arguments you gave the compiler to compile your example and
-observe the bug.  For example, did you use @samp{-O}?  To guarantee
-you will not omit something important, list them all.  A copy of the
-Makefile (or the output from make) is sufficient.
-
-If we were to try to guess the arguments, we would probably guess wrong
-and then we might not encounter the bug.
-
-@item
-A complete input script, and all necessary source files, that will
-reproduce the bug.
-
-@item
-A description of what behavior you observe that you believe is
-incorrect.  For example, ``It gets a fatal signal.''
-
-Of course, if the bug is that GDB gets a fatal signal, then we will
-certainly notice it.  But if the bug is incorrect output, we might not
-notice unless it is glaringly wrong.  We are human, after all.  You
-might as well not give us a chance to make a mistake.
-
-Even if the problem you experience is a fatal signal, you should still
-say so explicitly.  Suppose something strange is going on, such as,
-your copy of GDB is out of synch, or you have encountered a
-bug in the C library on your system.  (This has happened!)  Your copy
-might crash and ours would not.  If you told us to expect a crash,
-then when ours fails to crash, we would know that the bug was not
-happening for us.  If you had not told us to expect a crash, then we
-would not be able to draw any conclusion from our observations.
-
-@item
-If you wish to suggest changes to the GDB source, send us context
-diffs.  If you even discuss something in the GDB source, refer to
-it by context, not by line number.
-
-The line numbers in our development sources will not match those in your
-sources.  Your line numbers would convey no useful information to us.
-@end itemize
-
-Here are some things that are not necessary:
-
-@itemize @bullet
-@item
-A description of the envelope of the bug.
-
-Often people who encounter a bug spend a lot of time investigating
-which changes to the input file will make the bug go away and which
-changes will not affect it.
-
-This is often time consuming and not very useful, because the way we
-will find the bug is by running a single example under the debugger
-with breakpoints, not by pure deduction from a series of examples.
-We recommend that you save your time for something else.
-
-Of course, if you can find a simpler example to report @emph{instead}
-of the original one, that is a convenience for us.  Errors in the
-output will be easier to spot, running under the debugger will take
-less time, etc.
-
-However, simplification is not vital; if you do not want to do this,
-report the bug anyway and send us the entire test case you used.
-
-@item
-A patch for the bug.
-
-A patch for the bug does help us if it is a good one.  But do not omit
-the necessary information, such as the test case, on the assumption that
-a patch is all we need.  We might see problems with your patch and decide
-to fix the problem another way, or we might not understand it at all.
-
-Sometimes with a program as complicated as GDB it is very hard to
-construct an example that will make the program follow a certain path
-through the code.  If you do not send us the example, we will not be able
-to construct one, so we will not be able to verify that the bug is fixed.
-
-And if we cannot understand what bug you are trying to fix, or why your
-patch should be an improvement, we will not install it.  A test case will
-help us to understand.
-
-@item
-A guess about what the bug is or what it depends on.
-
-Such guesses are usually wrong.  Even we cannot guess right about such
-things without first using the debugger to find the facts.
-@end itemize
-
-@c Note: no need to update nodes for rdl-apps.texi since it appears
-@c *only* in the TeX version of the manual.
-@c Note: eventually, make a cross reference to the readline Info nodes.
-@iftex
-@c appendices describing GNU readline.  Distributed with readline code.
-@include rluser.texinfo
-@include inc-hist.texi
-@end iftex
-
-@node Renamed Commands, Installing GDB, GDB Bugs, Top
-@appendix Renamed Commands
-
-The following commands were renamed in GDB 4, in order to make the
-command set as a whole more consistent and easier to use and remember:
-
-@kindex add-syms
-@kindex delete environment
-@kindex info copying
-@kindex info convenience
-@kindex info directories
-@kindex info editing
-@kindex info history
-@kindex info targets
-@kindex info values
-@kindex info version
-@kindex info warranty
-@kindex set addressprint
-@kindex set arrayprint
-@kindex set prettyprint
-@kindex set screen-height
-@kindex set screen-width
-@kindex set unionprint
-@kindex set vtblprint
-@kindex set demangle
-@kindex set asm-demangle
-@kindex set sevenbit-strings
-@kindex set array-max
-@kindex set caution
-@kindex set history write
-@kindex show addressprint
-@kindex show arrayprint
-@kindex show prettyprint
-@kindex show screen-height
-@kindex show screen-width
-@kindex show unionprint
-@kindex show vtblprint
-@kindex show demangle
-@kindex show asm-demangle
-@kindex show sevenbit-strings
-@kindex show array-max
-@kindex show caution
-@kindex show history write
-@kindex unset
-
-@c TEXI2ROFF-KILL
-@ifinfo
-@c END TEXI2ROFF-KILL
-@example
-OLD COMMAND               NEW COMMAND
-@c TEXI2ROFF-KILL
----------------           -------------------------------
-@c END TEXI2ROFF-KILL
-add-syms                  add-symbol-file
-delete environment        unset environment
-info convenience          show convenience
-info copying              show copying
-info directories          show directories
-info editing              show commands
-info history              show values
-info targets              help target
-info values               show values
-info version              show version
-info warranty             show warranty
-set/show addressprint     set/show print address
-set/show array-max        set/show print elements
-set/show arrayprint       set/show print array
-set/show asm-demangle     set/show print asm-demangle
-set/show caution          set/show confirm
-set/show demangle         set/show print demangle
-set/show history write    set/show history save
-set/show prettyprint      set/show print pretty
-set/show screen-height    set/show height
-set/show screen-width     set/show width
-set/show sevenbit-strings set/show print sevenbit-strings
-set/show unionprint       set/show print union
-set/show vtblprint        set/show print vtbl
-
-unset                     [No longer an alias for delete]
-@end example
-@c TEXI2ROFF-KILL
-@end ifinfo
-
-@tex
-\vskip \parskip\vskip \baselineskip
-\halign{\tt #\hfil &\qquad#&\tt #\hfil\cr
-{\bf Old Command}         &&{\bf New Command}\cr
-add-syms                  &&add-symbol-file\cr
-delete environment        &&unset environment\cr
-info convenience          &&show convenience\cr
-info copying              &&show copying\cr
-info directories          &&show directories     \cr
-info editing              &&show commands\cr
-info history              &&show values\cr
-info targets              &&help target\cr
-info values               &&show values\cr
-info version              &&show version\cr
-info warranty             &&show warranty\cr
-set{\rm / }show addressprint     &&set{\rm / }show print address\cr
-set{\rm / }show array-max        &&set{\rm / }show print elements\cr
-set{\rm / }show arrayprint       &&set{\rm / }show print array\cr
-set{\rm / }show asm-demangle     &&set{\rm / }show print asm-demangle\cr
-set{\rm / }show caution          &&set{\rm / }show confirm\cr
-set{\rm / }show demangle         &&set{\rm / }show print demangle\cr
-set{\rm / }show history write    &&set{\rm / }show history save\cr
-set{\rm / }show prettyprint      &&set{\rm / }show print pretty\cr
-set{\rm / }show screen-height    &&set{\rm / }show height\cr
-set{\rm / }show screen-width     &&set{\rm / }show width\cr
-set{\rm / }show sevenbit-strings &&set{\rm / }show print sevenbit-strings\cr
-set{\rm / }show unionprint       &&set{\rm / }show print union\cr
-set{\rm / }show vtblprint        &&set{\rm / }show print vtbl\cr
-\cr
-unset                     &&\rm(No longer an alias for delete)\cr
-}
-@end tex
-@c END TEXI2ROFF-KILL
-
-@node Installing GDB, Copying, Renamed Commands, Top
-@appendix Installing GDB
-@cindex configuring GDB
-@cindex installation
-
-@iftex
-@c irrelevant in info file; it's as current as the code it lives with.
-@quotation
-@emph{Warning:} These installation instructions are current as of
-GDB version 4.4.4.  If you're installing a more recent release
-of GDB, we may have improved the installation procedures since
-printing this manual; see the @file{README} file included in your
-release for the most recent instructions.
-@end quotation
-@end iftex
-
-GDB comes with a @code{configure} script that automates the process
-of preparing GDB for installation; you can then use @code{make} to
-build the program.
-
-The GDB distribution includes all the source code you need for GDB in
-a single directory, whose name is usually composed by appending the
-version number to @samp{gdb}.
-
-For example, the GDB version 4.4.4 distribution is in the @file{gdb-4.4.4}
-directory.  That directory contains:
-
-@table @code
-@item gdb-4.4.4/configure @r{(and supporting files)}
-script for configuring GDB and all its supporting libraries.
-
-@item gdb-4.4.4/gdb
-the source specific to GDB itself
-
-@item gdb-4.4.4/bfd
-source for the Binary File Descriptor Library
-
-@item gdb-4.4.4/include
-GNU include files
-
-@item gdb-4.4.4/libiberty
-source for the @samp{-liberty} free software library
-
-@item gdb-4.4.4/readline
-source for the GNU command-line interface
-@end table
-
-The simplest way to configure and build GDB is to run @code{configure}
-from the @file{gdb-@var{version-number}} source directory, which in
-this example is the @file{gdb-4.4.4} directory.
-
-First switch to the @file{gdb-@var{version-number}} source directory
-if you are not already in it; then run @code{configure}.  Pass the
-identifier for the platform on which GDB will run as an
-argument.
-
-For example:
-
-@example
-cd gdb-4.4.4
-./configure @var{host}
-make
-@end example
-
-@noindent
-where @var{host} is an identifier such as @samp{sun4} or
-@samp{decstation}, that identifies the platform where GDB will run.
-
-These @code{configure} and @code{make} commands build the three libraries @file{bfd},
-@file{readline}, and @file{libiberty}, then @code{gdb} itself.  The
-configured source files, and the binaries, are left in the
-corresponding source directories.
-
-@code{configure} is a Bourne-shell (@code{/bin/sh}) script; if your
-system does not recognize this automatically when you run a different
-shell, you may need to run @code{sh} on it explicitly:
-
-@example
-sh configure @var{host}
-@end example
-
-If you run @code{configure} from a directory that contains source
-directories for multiple libraries or programs, such as the
-@file{gdb-4.4.4} source directory for version 4.4.4, @code{configure}
-creates configuration files for every directory level underneath (unless
-you tell it not to, with the @samp{--norecursion} option).
-
-You can run the @code{configure} script from any of the
-subordinate directories in the GDB distribution, if you only want to
-configure that subdirectory; but be sure to specify a path to it.
-
-For example, with version 4.4.4, type the following to configure only
-the @code{bfd} subdirectory:
-
-@example
-@group
-cd gdb-4.4.4/bfd
-../configure @var{host}
-@end group
-@end example
-
-You can install @code{gdb} anywhere; it has no hardwired paths.
-However, you should make sure that the shell on your path (named by
-the @samp{SHELL} environment variable) is publicly readable.  Remember
-that GDB uses the shell to start your program---some systems refuse to
-let GDB debug child processes whose programs are not readable.
-
-@menu
-* Separate Objdir::             Compiling GDB in another directory
-* Config Names::                Specifying names for hosts and targets
-* configure Options::           Summary of options for configure
-* Formatting Documentation::    How to format and print GDB documentation
-@end menu
-
-@node Separate Objdir, Config Names, Installing GDB, Installing GDB
-@section Compiling GDB in Another Directory
-
-If you want to run GDB versions for several host or target machines,
-you'll need a different @code{gdb} compiled for each combination of
-host and target.  @code{configure} is designed to make this easy by
-allowing you to generate each configuration in a separate subdirectory,
-rather than in the source directory.  If your @code{make} program
-handles the @samp{VPATH} feature (GNU @code{make} does), running
-@code{make} in each of these directories then builds the @code{gdb}
-program specified there.
-
-To build @code{gdb} in a separate directory, run @code{configure}
-with the @samp{--srcdir} option to specify where to find the source.
-(Remember, you'll also need to specify a path to find @code{configure}
-itself from your working directory.)
-
-For example, with version 4.4.4, you can build GDB in a separate
-directory for a Sun 4 like this:
-
-@example
-@group
-cd gdb-4.4.4
-mkdir ../gdb-sun4
-cd ../gdb-sun4
-../gdb-4.4.4/configure --srcdir=../gdb-4.4.4 sun4
-make
-@end group
-@end example
-
-When @code{configure} builds a configuration using a remote source
-directory, it creates a tree for the binaries with the same structure
-(and using the same names) as the tree under the source directory.  In
-the example, you'd find the Sun 4 library @file{libiberty.a} in the
-directory @file{gdb-sun4/libiberty}, and GDB itself in
-@file{gdb-sun4/gdb}.
-
-One popular use for building several GDB configurations in separate
-directories is to configure GDB for cross-compiling (where GDB
-runs on one machine---the host---while debugging programs that run on
-another machine---the target).  You specify a cross-debugging target by
-giving the @samp{--target=@var{target}} option to @code{configure}.
-
-When you run @code{make} to build a program or library, you must run
-it in a configured directory---whatever directory you were in when you
-called @code{configure} (or one of its subdirectories).
-
-The @code{Makefile} generated by @code{configure} for each source
-directory also runs recursively.  If you type @code{make} in a source
-directory such as @file{gdb-4.4.4} (or in a separate configured
-directory configured with @samp{--srcdir=@var{path}/gdb-4.4.4}), you
-will build all the required libraries, then build GDB.
-
-When you have multiple hosts or targets configured in separate
-directories, you can run @code{make} on them in parallel (for example,
-if they are NFS-mounted on each of the hosts); they will not interfere
-with each other.
-
-@node Config Names, configure Options, Separate Objdir, Installing GDB
-@section Specifying Names for Hosts and Targets
-
-The specifications used for hosts and targets in the @code{configure}
-script are based on a three-part naming scheme, but some short predefined
-aliases are also supported.  The full naming scheme encodes three pieces
-of information in the following pattern:
-
-@example
-@var{architecture}-@var{vendor}-@var{os}
-@end example
-
-For example, you can use the alias @code{sun4} as a @var{host} argument
-or in a @code{--target=@var{target}} option, but the equivalent full name
-is @samp{sparc-sun-sunos4}.
-
-The following table shows all the architectures, hosts, and OS
-prefixes that @code{configure} recognizes in GDB version 4.4.4.  Entries
-in the ``OS prefix'' column ending in a @samp{*} may be followed by a
-release number.
-
-@c FIXME! Update for gdb 4.4
-@c TEXI2ROFF-KILL
-@ifinfo
-@c END TEXI2ROFF-KILL
-@example
-
-ARCHITECTURE  VENDOR                     OS prefix
-@c TEXI2ROFF-KILL
-------------+--------------------------+---------------------------
-@c END TEXI2ROFF-KILL
-            |                          |
- 580        | altos        hp          | aix*          msdos*     
- a29k       | amd          ibm         | amigados      newsos* 
- alliant    | amdahl       intel       | aout          nindy*  
- arm        | aout         isi         | bout          osf*    
- c1         | apollo       little      | bsd*          sco*    
- c2         | att          mips        | coff          sunos*  
- cray2      | bcs          motorola    | ctix*         svr4    
- h8300      | bout         ncr         | dgux*         sym*    
- i386       | bull         next        | dynix*        sysv*   
- i860       | cbm          nyu         | ebmon         ultrix* 
- i960       | coff         sco         | esix*         unicos* 
- m68000     | convergent   sequent     | hds           unos*   
- m68k       | convex       sgi         | hpux*         uts     
- m88k       | cray         sony        | irix*         v88r*   
- mips       | dec          sun         | isc*          vms*    
- ns32k      | encore       unicom      | kern          vxworks*
- pyramid    | gould        utek        | mach*         
- romp       | hitachi      wrs         | 
- rs6000     |                          | 
- sparc      |                          | 
- tahoe      |                          | 
- tron       |                          | 
- vax        |                          | 
- xmp        |                          | 
- ymp        |                          |                          
-@end example
-
-@c TEXI2ROFF-KILL
-@end ifinfo
-@tex
-%\vskip\parskip
-\vskip \baselineskip
-\hfil\vbox{\offinterlineskip
-\halign{\strut\tt #\hfil\ &\vrule#&\strut\ \tt #\hfil\ &\strut\ \tt #\hfil
-\ &\vrule#&\strut\ \tt #\hfil\ &\strut\ \tt #\hfil \cr
-{\bf Architecture} &&{\bf Vendor} &&&{\bf OS prefix}\cr
-\multispan7\hrulefill\cr
- 580        && altos     &  hp          && aix*       &  msdos*     \cr
- a29k       && amd       &  ibm         && amigados   &  newsos*    \cr
- alliant    && amdahl    &  intel       && aout       &  nindy*     \cr
- arm        && aout      &  isi         && bout       &  osf*       \cr
- c1         && apollo    &  little      && bsd*       &  sco*       \cr
- c2         && att       &  mips        && coff       &  sunos*     \cr
- cray2      && bcs       &  motorola    && ctix*      &  svr4       \cr
- h8300      && bout      &  ncr         && dgux*      &  sym*       \cr
- i386       && bull      &  next        && dynix*     &  sysv*      \cr
- i860       && cbm       &  nyu         && ebmon      &  ultrix*    \cr
- i960       && coff      &  sco         && esix*      &  unicos*    \cr
- m68000     && convergent&  sequent     && hds        &  unos*      \cr
- m68k       && convex    &  sgi         && hpux*      &  uts        \cr
- m88k       && cray      &  sony        && irix*      &  v88r*      \cr
- mips       && dec       &  sun         && isc*       &  vms*       \cr
- ns32k      && encore    &  unicom      && kern       &  vxworks*   \cr
- pyramid    && gould     &  utek        && mach*      &             \cr
- romp       && hitachi   &  wrs         &&            &             \cr
- rs6000     &&           &              &&            &             \cr
- sparc      &&           &              &&            &             \cr
- tahoe      &&           &              &&            &             \cr
- tron       &&           &              &&            &             \cr
- vax        &&           &              &&            &             \cr
- xmp        &&           &              &&            &             \cr
- ymp        &&           &              &&            &             \cr
-}\hfil}
-@end tex
-@c END TEXI2ROFF-KILL
-
-@quotation
-@emph{Warning:} @code{configure} can represent a very large number of
-combinations of architecture, vendor, and OS.  There is by no means
-support available for all possible combinations!
-@end quotation
-
-The @code{configure} script accompanying GDB does not provide
-any query facility to list all supported host and target names or
-aliases.  @code{configure} calls the Bourne shell script
-@code{config.sub} to map abbreviations to full names; you can read the
-script, if you wish, or you can use it to test your guesses on
-abbreviations---for example:
-
-@example
-% sh config.sub sun4
-sparc-sun-sunos4
-% sh config.sub sun3
-m68k-sun-sunos4
-% sh config.sub decstation
-mips-dec-ultrix
-% sh config.sub hp300bsd
-m68k-hp-bsd
-% sh config.sub i386v
-i386-none-sysv
-% sh config.sub i786v
-*** Configuration "i786v" not recognized
-@end example
-
-@noindent
-@code{config.sub} is also distributed in the GDB source
-directory (@file{gdb-4.4.4}, for version 4.4.4).
-
-@node configure Options, Formatting Documentation, Config Names, Installing GDB
-@section @code{configure} Options
-
-Here is a summary of all the @code{configure} options and arguments that
-you might use for building GDB:
-
-@example
-configure @r{[}--destdir=@var{dir}@r{]} @r{[}--srcdir=@var{path}@r{]}
-          @r{[}--norecursion@r{]} @r{[}--rm@r{]}
-          @r{[}--target=@var{target}@r{]} @var{host}
-@end example
-
-@noindent
-You may introduce options with a single @samp{-} rather than
-@samp{--} if you prefer; but you may abbreviate option names if you use
-@samp{--}.
-
-@table @code
-@item --destdir=@var{dir}
-@var{dir} is an installation directory @emph{path prefix}.  After you
-configure with this option, @code{make install} will install GDB as
-@file{@var{dir}/bin/gdb}, and the libraries in @file{@var{dir}/lib}.
-If you specify @samp{--destdir=/usr/local}, for example, @code{make
-install} creates @file{/usr/local/bin/gdb}.
-
-@item --srcdir=@var{path}
-Use this option to make configurations in directories separate from the
-GDB source directories.  Among other things, you can use this to
-build (or maintain) several configurations simultaneously, in separate
-directories.  @code{configure} writes configuration specific files in
-the current directory, but arranges for them to use the source in the
-directory @var{path}.  @code{configure} will create directories under
-the working directory in parallel to the source directories below
-@var{path}.
-
-@item --norecursion
-Configure only the directory level where @code{configure} is executed; do not
-propagate configuration to subdirectories.
-
-@item --rm
-Remove the configuration that the other arguments specify.
-
-@c This does not work (yet if ever).  FIXME.
-@c @item --parse=@var{lang} @dots{}
-@c Configure the GDB expression parser to parse the listed languages.
-@c @samp{all} configures GDB for all supported languages.  To get a
-@c list of all supported languages, omit the argument.  Without this
-@c option, GDB is configured to parse all supported languages.
-
-@item --target=@var{target}
-Configure GDB for cross-debugging programs running on the specified
-@var{target}.  Without this option, GDB is configured to debug
-programs that run on the same machine (@var{host}) as GDB itself.
-
-There is no convenient way to generate a list of all available targets.
-
-@item @var{host} @dots{}
-Configure GDB to run on the specified @var{host}.
-
-There is no convenient way to generate a list of all available hosts.
-@end table
-
-@noindent
-@code{configure} accepts other options, for compatibility with
-configuring other GNU tools recursively; but these are the only
-options that affect GDB or its supporting libraries.
-
-@node Formatting Documentation,  , configure Options, Installing GDB
-@section Formatting the Documentation
-
-All the documentation for GDB, including this manual, comes as part of
-the distribution.  The documentation is written in Texinfo format,
-which is a documentation system that uses a single source file to
-produce both on-line information and a printed manual.  You can use
-one of the Info formatting commands to create the on-line version of
-the documentation and @TeX{} (or @code{texi2roff}) to typeset the
-printed version.
-
-GDB includes an already formatted copy of the on-line Info version of
-this manual in the @file{gdb} subdirectory.  The main Info file is
-@file{gdb-@var{version-number}/gdb/gdb.info}, and it refers to
-subordinate files matching @samp{gdb.info*} in the same directory.
-
-If you want to format these Info files yourself, you need one of the
-Info formatting programs, such as @code{texinfo-format-buffer} or
-@code{makeinfo}.
-
-If you have @code{makeinfo} installed, and are in the top level GDB
-source directory (@file{gdb-4.4.4}, in the case of version 4.4.4), you can
-make the Info file by typing:
-
-@example
-cd gdb
-make gdb.info
-@end example
-
-If you want to typeset and print copies of this manual, you need
-@TeX{}, a printing program such as @code{lpr}, and @file{texinfo.tex},
-the Texinfo definitions file.
-
-@TeX{} is typesetting program; it does not print files directly, but
-produces output files called @sc{dvi} files.  To print a typeset
-document, you need a program to print @sc{dvi} files.  If your system
-has @TeX{} installed, chances are it has such a program.  The precise
-command to use depends on your system; @kbd{lpr -d} is common; another
-is @kbd{dvips}.  The @sc{dvi} print command may require a file name
-without any extension or a @samp{.dvi} extension.
-
-@TeX{} also requires a macro definitions file called
-@file{texinfo.tex}.  This file tells @TeX{} how to typeset a document
-written in Texinfo format.  On its own, @TeX{} cannot read, much less
-typeset a Texinfo file.  @file{texinfo.tex} is distributed with GDB
-and is located in the @file{gdb-@var{version-number}/texinfo}
-directory.
-
-If you have @TeX{} and a @sc{dvi} printer program installed, you can
-typeset and print this manual.  First switch to the the @file{gdb}
-subdirectory of the main source directory (for example, to
-@file{gdb-4.4.4/gdb}) and then type:
-
-@example
-make gdb.dvi
-@end example
-
-@cindex GDB reference card
-@cindex reference card
-In addition to the manual, the GDB 4 release includes a three-column
-reference card.  Format the GDB reference card by typing:
-
-@example
-make refcard.dvi
-@end example
-
-The GDB reference card is designed to print in landscape mode on US
-``letter'' size paper; that is, on a sheet 11 inches wide by 8.5 inches
-high.  You will need to specify this form of printing as an option to
-your @sc{dvi} output program.
-
-The GDB 4 release includes an already-formatted reference card, ready
-for printing on a PostScript or GhostScript printer, in the @file{gdb}
-subdirectory of the main source directory---in
-@file{gdb-4.2/gdb/refcard.ps} of the version 4.2 release.  If you have
-a PostScript or GhostScript printer, you can print the reference card
-by just sending @file{refcard.ps} to the printer.
-
-@node Copying, Index, Installing GDB, Top
-@unnumbered GNU GENERAL PUBLIC LICENSE
-@center Version 2, June 1991
-
-@display
-Copyright @copyright{} 1989, 1991 Free Software Foundation, Inc.
-675 Mass Ave, Cambridge, MA 02139, USA
-
-Everyone is permitted to copy and distribute verbatim copies
-of this license document, but changing it is not allowed.
-@end display
-
-@unnumberedsec Preamble
-
-  The licenses for most software are designed to take away your
-freedom to share and change it.  By contrast, the GNU General Public
-License is intended to guarantee your freedom to share and change free
-software---to make sure the software is free for all its users.  This
-General Public License applies to most of the Free Software
-Foundation's software and to any other program whose authors commit to
-using it.  (Some other Free Software Foundation software is covered by
-the GNU Library General Public License instead.)  You can apply it to
-your programs, too.
-
-  When we speak of free software, we are referring to freedom, not
-price.  Our General Public Licenses are designed to make sure that you
-have the freedom to distribute copies of free software (and charge for
-this service if you wish), that you receive source code or can get it
-if you want it, that you can change the software or use pieces of it
-in new free programs; and that you know you can do these things.
-
-  To protect your rights, we need to make restrictions that forbid
-anyone to deny you these rights or to ask you to surrender the rights.
-These restrictions translate to certain responsibilities for you if you
-distribute copies of the software, or if you modify it.
-
-  For example, if you distribute copies of such a program, whether
-gratis or for a fee, you must give the recipients all the rights that
-you have.  You must make sure that they, too, receive or can get the
-source code.  And you must show them these terms so they know their
-rights.
-
-  We protect your rights with two steps: (1) copyright the software, and
-(2) offer you this license which gives you legal permission to copy,
-distribute and/or modify the software.
-
-  Also, for each author's protection and ours, we want to make certain
-that everyone understands that there is no warranty for this free
-software.  If the software is modified by someone else and passed on, we
-want its recipients to know that what they have is not the original, so
-that any problems introduced by others will not reflect on the original
-authors' reputations.
-
-  Finally, any free program is threatened constantly by software
-patents.  We wish to avoid the danger that redistributors of a free
-program will individually obtain patent licenses, in effect making the
-program proprietary.  To prevent this, we have made it clear that any
-patent must be licensed for everyone's free use or not licensed at all.
-
-  The precise terms and conditions for copying, distribution and
-modification follow.
-
-@iftex
-@unnumberedsec TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
-@end iftex
-@ifinfo
-@center TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
-@end ifinfo
-
-@enumerate
-@item
-This License applies to any program or other work which contains
-a notice placed by the copyright holder saying it may be distributed
-under the terms of this General Public License.  The ``Program'', below,
-refers to any such program or work, and a ``work based on the Program''
-means either the Program or any derivative work under copyright law:
-that is to say, a work containing the Program or a portion of it,
-either verbatim or with modifications and/or translated into another
-language.  (Hereinafter, translation is included without limitation in
-the term ``modification''.)  Each licensee is addressed as ``you''.
-
-Activities other than copying, distribution and modification are not
-covered by this License; they are outside its scope.  The act of
-running the Program is not restricted, and the output from the Program
-is covered only if its contents constitute a work based on the
-Program (independent of having been made by running the Program).
-Whether that is true depends on what the Program does.
-
-@item
-You may copy and distribute verbatim copies of the Program's
-source code as you receive it, in any medium, provided that you
-conspicuously and appropriately publish on each copy an appropriate
-copyright notice and disclaimer of warranty; keep intact all the
-notices that refer to this License and to the absence of any warranty;
-and give any other recipients of the Program a copy of this License
-along with the Program.
-
-You may charge a fee for the physical act of transferring a copy, and
-you may at your option offer warranty protection in exchange for a fee.
-
-@item
-You may modify your copy or copies of the Program or any portion
-of it, thus forming a work based on the Program, and copy and
-distribute such modifications or work under the terms of Section 1
-above, provided that you also meet all of these conditions:
-
-@enumerate a
-@item
-You must cause the modified files to carry prominent notices
-stating that you changed the files and the date of any change.
-
-@item
-You must cause any work that you distribute or publish, that in
-whole or in part contains or is derived from the Program or any
-part thereof, to be licensed as a whole at no charge to all third
-parties under the terms of this License.
-
-@item
-If the modified program normally reads commands interactively
-when run, you must cause it, when started running for such
-interactive use in the most ordinary way, to print or display an
-announcement including an appropriate copyright notice and a
-notice that there is no warranty (or else, saying that you provide
-a warranty) and that users may redistribute the program under
-these conditions, and telling the user how to view a copy of this
-License.  (Exception: if the Program itself is interactive but
-does not normally print such an announcement, your work based on
-the Program is not required to print an announcement.)
-@end enumerate
-
-These requirements apply to the modified work as a whole.  If
-identifiable sections of that work are not derived from the Program,
-and can be reasonably considered independent and separate works in
-themselves, then this License, and its terms, do not apply to those
-sections when you distribute them as separate works.  But when you
-distribute the same sections as part of a whole which is a work based
-on the Program, the distribution of the whole must be on the terms of
-this License, whose permissions for other licensees extend to the
-entire whole, and thus to each and every part regardless of who wrote it.
-
-Thus, it is not the intent of this section to claim rights or contest
-your rights to work written entirely by you; rather, the intent is to
-exercise the right to control the distribution of derivative or
-collective works based on the Program.
-
-In addition, mere aggregation of another work not based on the Program
-with the Program (or with a work based on the Program) on a volume of
-a storage or distribution medium does not bring the other work under
-the scope of this License.
-
-@item
-You may copy and distribute the Program (or a work based on it,
-under Section 2) in object code or executable form under the terms of
-Sections 1 and 2 above provided that you also do one of the following:
-
-@enumerate a
-@item
-Accompany it with the complete corresponding machine-readable
-source code, which must be distributed under the terms of Sections
-1 and 2 above on a medium customarily used for software interchange; or,
-
-@item
-Accompany it with a written offer, valid for at least three
-years, to give any third party, for a charge no more than your
-cost of physically performing source distribution, a complete
-machine-readable copy of the corresponding source code, to be
-distributed under the terms of Sections 1 and 2 above on a medium
-customarily used for software interchange; or,
-
-@item
-Accompany it with the information you received as to the offer
-to distribute corresponding source code.  (This alternative is
-allowed only for noncommercial distribution and only if you
-received the program in object code or executable form with such
-an offer, in accord with Subsection b above.)
-@end enumerate
-
-The source code for a work means the preferred form of the work for
-making modifications to it.  For an executable work, complete source
-code means all the source code for all modules it contains, plus any
-associated interface definition files, plus the scripts used to
-control compilation and installation of the executable.  However, as a
-special exception, the source code distributed need not include
-anything that is normally distributed (in either source or binary
-form) with the major components (compiler, kernel, and so on) of the
-operating system on which the executable runs, unless that component
-itself accompanies the executable.
-
-If distribution of executable or object code is made by offering
-access to copy from a designated place, then offering equivalent
-access to copy the source code from the same place counts as
-distribution of the source code, even though third parties are not
-compelled to copy the source along with the object code.
-
-@item
-You may not copy, modify, sublicense, or distribute the Program
-except as expressly provided under this License.  Any attempt
-otherwise to copy, modify, sublicense or distribute the Program is
-void, and will automatically terminate your rights under this License.
-However, parties who have received copies, or rights, from you under
-this License will not have their licenses terminated so long as such
-parties remain in full compliance.
-
-@item
-You are not required to accept this License, since you have not
-signed it.  However, nothing else grants you permission to modify or
-distribute the Program or its derivative works.  These actions are
-prohibited by law if you do not accept this License.  Therefore, by
-modifying or distributing the Program (or any work based on the
-Program), you indicate your acceptance of this License to do so, and
-all its terms and conditions for copying, distributing or modifying
-the Program or works based on it.
-
-@item
-Each time you redistribute the Program (or any work based on the
-Program), the recipient automatically receives a license from the
-original licensor to copy, distribute or modify the Program subject to
-these terms and conditions.  You may not impose any further
-restrictions on the recipients' exercise of the rights granted herein.
-You are not responsible for enforcing compliance by third parties to
-this License.
-
-@item
-If, as a consequence of a court judgment or allegation of patent
-infringement or for any other reason (not limited to patent issues),
-conditions are imposed on you (whether by court order, agreement or
-otherwise) that contradict the conditions of this License, they do not
-excuse you from the conditions of this License.  If you cannot
-distribute so as to satisfy simultaneously your obligations under this
-License and any other pertinent obligations, then as a consequence you
-may not distribute the Program at all.  For example, if a patent
-license would not permit royalty-free redistribution of the Program by
-all those who receive copies directly or indirectly through you, then
-the only way you could satisfy both it and this License would be to
-refrain entirely from distribution of the Program.
-
-If any portion of this section is held invalid or unenforceable under
-any particular circumstance, the balance of the section is intended to
-apply and the section as a whole is intended to apply in other
-circumstances.
-
-It is not the purpose of this section to induce you to infringe any
-patents or other property right claims or to contest validity of any
-such claims; this section has the sole purpose of protecting the
-integrity of the free software distribution system, which is
-implemented by public license practices.  Many people have made
-generous contributions to the wide range of software distributed
-through that system in reliance on consistent application of that
-system; it is up to the author/donor to decide if he or she is willing
-to distribute software through any other system and a licensee cannot
-impose that choice.
-
-This section is intended to make thoroughly clear what is believed to
-be a consequence of the rest of this License.
-
-@item
-If the distribution and/or use of the Program is restricted in
-certain countries either by patents or by copyrighted interfaces, the
-original copyright holder who places the Program under this License
-may add an explicit geographical distribution limitation excluding
-those countries, so that distribution is permitted only in or among
-countries not thus excluded.  In such case, this License incorporates
-the limitation as if written in the body of this License.
-
-@item
-The Free Software Foundation may publish revised and/or new versions
-of the General Public License from time to time.  Such new versions will
-be similar in spirit to the present version, but may differ in detail to
-address new problems or concerns.
-
-Each version is given a distinguishing version number.  If the Program
-specifies a version number of this License which applies to it and ``any
-later version'', you have the option of following the terms and conditions
-either of that version or of any later version published by the Free
-Software Foundation.  If the Program does not specify a version number of
-this License, you may choose any version ever published by the Free Software
-Foundation.
-
-@item
-If you wish to incorporate parts of the Program into other free
-programs whose distribution conditions are different, write to the author
-to ask for permission.  For software which is copyrighted by the Free
-Software Foundation, write to the Free Software Foundation; we sometimes
-make exceptions for this.  Our decision will be guided by the two goals
-of preserving the free status of all derivatives of our free software and
-of promoting the sharing and reuse of software generally.
-
-@iftex
-@heading NO WARRANTY
-@end iftex
-@ifinfo
-@center NO WARRANTY
-@end ifinfo
-
-@item
-BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
-FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  EXCEPT WHEN
-OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
-PROVIDE THE PROGRAM ``AS IS'' WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
-OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE RISK AS
-TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE
-PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
-REPAIR OR CORRECTION.
-
-@item
-IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
-WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
-REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
-INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
-OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
-TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
-YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
-PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
-POSSIBILITY OF SUCH DAMAGES.
-@end enumerate
-
-@iftex
-@heading END OF TERMS AND CONDITIONS
-@end iftex
-@ifinfo
-@center END OF TERMS AND CONDITIONS
-@end ifinfo
-
-@page
-@unnumberedsec Applying These Terms to Your New Programs
-
-  If you develop a new program, and you want it to be of the greatest
-possible use to the public, the best way to achieve this is to make it
-free software which everyone can redistribute and change under these terms.
-
-  To do so, attach the following notices to the program.  It is safest
-to attach them to the start of each source file to most effectively
-convey the exclusion of warranty; and each file should have at least
-the ``copyright'' line and a pointer to where the full notice is found.
-
-@smallexample
-@var{one line to give the program's name and an idea of what it does.}
-Copyright (C) 19@var{yy}  @var{name of author}
-
-This program is free software; you can redistribute it and/or
-modify it under the terms of the GNU General Public License
-as published by the Free Software Foundation; either version 2
-of the License, or (at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the 
-Free Software Foundation, Inc., 675 Mass Ave,
-Cambridge, MA 02139, USA.
-@end smallexample
-
-Also add information on how to contact you by electronic and paper mail.
-
-If the program is interactive, make it output a short notice like this
-when it starts in an interactive mode:
-
-@smallexample
-Gnomovision version 69, Copyright (C) 19@var{yy} @var{name of author}
-Gnomovision comes with ABSOLUTELY NO WARRANTY; for details
-type `show w'.  This is free software, and you are welcome
-to redistribute it under certain conditions; type `show c' 
-for details.
-@end smallexample
-
-The hypothetical commands @samp{show w} and @samp{show c} should show
-the appropriate parts of the General Public License.  Of course, the
-commands you use may be called something other than @samp{show w} and
-@samp{show c}; they could even be mouse-clicks or menu items---whatever
-suits your program.
-
-You should also get your employer (if you work as a programmer) or your
-school, if any, to sign a ``copyright disclaimer'' for the program, if
-necessary.  Here is a sample; alter the names:
-
-@example
-Yoyodyne, Inc., hereby disclaims all copyright
-interest in the program `Gnomovision'
-(which makes passes at compilers) written 
-by James Hacker.
-
-@var{signature of Ty Coon}, 1 April 1989
-Ty Coon, President of Vice
-@end example
-
-This General Public License does not permit incorporating your program into
-proprietary programs.  If your program is a subroutine library, you may
-consider it more useful to permit linking proprietary applications with the
-library.  If this is what you want to do, use the GNU Library General
-Public License instead of this License.
-
-@node Index,  , Copying, Top
-@unnumbered Index
-
-@printindex cp
-
-@tex
-% I think something like @colophon should be in texinfo.  In the
-% meantime:
-\long\def\colophon{\hbox to0pt{}\vfill
-\centerline{The body of this manual is set in}
-\centerline{\fontname\tenrm,}
-\centerline{with headings in {\bf\fontname\tenbf}}
-\centerline{and examples in {\tt\fontname\tentt}.}
-\centerline{{\it\fontname\tenit\/},}
-\centerline{{\bf\fontname\tenbf}, and}
-\centerline{{\sl\fontname\tensl\/}}
-\centerline{are used for emphasis.}\vfill}
-\page\colophon
-% Blame: pesch@cygnus.com, 1991.
-@end tex
-
-@contents
-@bye
index 56007dd..e69de29 100755 (executable)
@@ -1,205 +0,0 @@
-_dnl__ Copyright (c) 1988 1989 1990 1991 Free Software Foundation, Inc.
-_dnl__ This file is part of the source for the GDB manual.
-@c M4 FRAGMENT: $Id$
-@node Altering, _GDBN__ Files, Symbols, Top
-@chapter Altering Execution
-
-Once you think you have found an error in the program, you might want to
-find out for certain whether correcting the apparent error would lead to
-correct results in the rest of the run.  You can find the answer by
-experiment, using the _GDBN__ features for altering execution of the
-program.
-
-For example, you can store new values into variables or memory
-locations, give the program a signal, restart it at a different address,
-or even return prematurely from a function to its caller.
-
-@menu
-* Assignment::                 Assignment to Variables
-* Jumping::                    Continuing at a Different Address
-* Signaling::                  Giving the Program a Signal
-* Returning::                  Returning from a Function
-* Calling::                    Calling your Program's Functions
-@end menu
-
-@node Assignment, Jumping, Altering, Altering
-@section Assignment to Variables
-
-@cindex assignment
-@cindex setting variables
-To alter the value of a variable, evaluate an assignment expression.
-@xref{Expressions}.  For example,
-
-@example
-print x=4
-@end example
-
-@noindent
-would store the value 4 into the variable @code{x}, and then print the
-value of the assignment expression (which is 4).  All the assignment
-operators of C are supported, including the increment operators
-@samp{++} and @samp{--}, and combining assignments such as @samp{+=} and
-_0__@samp{<<=}_1__.
-
-@kindex set
-@kindex set variable
-@cindex variables, setting
-If you are not interested in seeing the value of the assignment, use the
-@code{set} command instead of the @code{print} command.  @code{set} is
-really the same as @code{print} except that the expression's value is not
-printed and is not put in the value history (@pxref{Value History}).  The
-expression is evaluated only for its effects.
-
-If the beginning of the argument string of the @code{set} command
-appears identical to a @code{set} subcommand, use the @code{set
-variable} command instead of just @code{set}.  This command is identical
-to @code{set} except for its lack of subcommands.  For example, a
-program might well have a variable @code{width}---which leads to
-an error if we try to set a new value with just @samp{set width=13}, as
-we might if @code{set width} didn't happen to be a _GDBN__ command:
-@example
-(_GDBP__) whatis width
-type = double
-(_GDBP__) p width
-$4 = 13
-(_GDBP__) set width=47
-Invalid syntax in expression.
-@end example
-@noindent
-The invalid expression, of course, is @samp{=47}.  What we can do in
-order to actually set our program's variable @code{width} is 
-@example
-(_GDBP__) set var width=47
-@end example
-
-_GDBN__ allows more implicit conversions in assignments than C does; you can
-freely store an integer value into a pointer variable or vice versa, and
-any structure can be converted to any other structure that is the same
-length or shorter.
-@comment FIXME: how do structs align/pad in these conversions? 
-@comment        /pesch@cygnus.com 18dec1990
-
-To store values into arbitrary places in memory, use the @samp{@{@dots{}@}}
-construct to generate a value of specified type at a specified address
-(@pxref{Expressions}).  For example, @code{@{int@}0x83040} refers
-to memory location @code{0x83040} as an integer (which implies a certain size
-and representation in memory), and
-
-@example
-set @{int@}0x83040 = 4
-@end example
-
-@noindent
-stores the value 4 into that memory location.
-
-@node Jumping, Signaling, Assignment, Altering
-@section Continuing at a Different Address
-
-Ordinarily, when you continue the program, you do so at the place where
-it stopped, with the @code{continue} command.  You can instead continue at
-an address of your own choosing, with the following commands:
-
-@table @code
-@item jump @var{linespec}
-@kindex jump
-Resume execution at line @var{linespec}.  Execution will stop
-immediately if there is a breakpoint there.  @xref{List} for a
-description of the different forms of @var{linespec}.
-
-The @code{jump} command does not change the current stack frame, or
-the stack pointer, or the contents of any memory location or any
-register other than the program counter.  If line @var{linespec} is in
-a different function from the one currently executing, the results may
-be bizarre if the two functions expect different patterns of arguments or
-of local variables.  For this reason, the @code{jump} command requests
-confirmation if the specified line is not in the function currently
-executing.  However, even bizarre results are predictable if you are
-well acquainted with the machine-language code of the program.
-
-@item jump *@var{address}
-Resume execution at the instruction at address @var{address}.
-@end table
-
-You can get much the same effect as the @code{jump} command by storing a
-new value into the register @code{$pc}.  The difference is that this
-does not start the program running; it only changes the address where it
-@emph{will} run when it is continued.  For example,
-
-@example
-set $pc = 0x485
-@end example
-
-@noindent
-causes the next @code{continue} command or stepping command to execute at
-address 0x485, rather than at the address where the program stopped.
-@xref{Stepping}.
-
-The most common occasion to use the @code{jump} command is to back up,
-perhaps with more breakpoints set, over a portion of a program that has
-already executed, in order to examine its execution in more detail.
-
-@node Signaling, Returning, Jumping, Altering
-@c @group
-@section Giving the Program a Signal
-
-@table @code
-@item signal @var{signalnum}
-@kindex signal
-Resume execution where the program stopped, but give it immediately the
-signal number @var{signalnum}.
-
-Alternatively, if @var{signalnum} is zero, continue execution without
-giving a signal.  This is useful when the program stopped on account of
-a signal and would ordinary see the signal when resumed with the
-@code{continue} command; @samp{signal 0} causes it to resume without a
-signal.
-
-@code{signal} does not repeat when you press @key{RET} a second time
-after executing the command.
-@end table
-@c @end group
-
-@node Returning, Calling, Signaling, Altering
-@section Returning from a Function
-
-@table @code
-@item return
-@itemx return @var{expression}
-@cindex returning from a function
-@kindex return
-You can cancel execution of a function call with the @code{return}
-command.  If you give an
-@var{expression} argument, its value is used as the function's return
-value. 
-@end table
-
-When you use @code{return}, _GDBN__ discards the selected stack frame
-(and all frames within it).  You can think of this as making the
-discarded frame return prematurely.  If you wish to specify a value to
-be returned, give that value as the argument to @code{return}.
-
-This pops the selected stack frame (@pxref{Selection}), and any other
-frames inside of it, leaving its caller as the innermost remaining
-frame.  That frame becomes selected.  The specified value is stored in
-the registers used for returning values of functions.
-
-The @code{return} command does not resume execution; it leaves the
-program stopped in the state that would exist if the function had just
-returned.  In contrast, the @code{finish} command (@pxref{Stepping})
-resumes execution until the selected stack frame returns naturally.
-
-@node     Calling,  , Returning, Altering
-@section Calling your Program's Functions
-
-@cindex calling functions
-@kindex call
-@table @code
-@item call @var{expr}
-Evaluate the expression @var{expr} without displaying @code{void}
-returned values.
-@end table
-
-You can use this variant of the @code{print} command if you want to
-execute a function from your program, but without cluttering the output
-with @code{void} returned values.  The result is printed and saved in
-the value history, if it is not void.
index 9647926..e69de29 100755 (executable)
@@ -1,221 +0,0 @@
-_dnl__ Copyright (c) 1990 1991 Free Software Foundation, Inc.
-_dnl__ This file is part of the source for the GDB manual.
-@c M4 FRAGMENT: $Id$
-@node _GDBN__ Bugs, Renamed Commands, Emacs, Top
-@chapter Reporting Bugs in _GDBN__
-@cindex Bugs in _GDBN__
-@cindex Reporting Bugs in _GDBN__
-
-Your bug reports play an essential role in making _GDBN__ reliable.
-
-Reporting a bug may help you by bringing a solution to your problem, or it
-may not.  But in any case the principal function of a bug report is to help
-the entire community by making the next version of _GDBN__ work better.  Bug
-reports are your contribution to the maintenance of _GDBN__.
-
-In order for a bug report to serve its purpose, you must include the
-information that enables us to fix the bug.
-
-@menu
-* Bug Criteria::               Have You Found a Bug?
-* Bug Reporting::              How to Report Bugs
-@end menu
-
-@node Bug Criteria, Bug Reporting, _GDBN__ Bugs, _GDBN__ Bugs
-@section Have You Found a Bug?
-@cindex Bug Criteria
-
-If you are not sure whether you have found a bug, here are some guidelines:
-
-@itemize @bullet
-@item
-@cindex Fatal Signal
-@cindex Core Dump
-If the debugger gets a fatal signal, for any input whatever, that is a
-_GDBN__ bug.  Reliable debuggers never crash.
-
-@item
-@cindex error on Valid Input
-If _GDBN__ produces an error message for valid input, that is a bug.
-
-@item
-@cindex Invalid Input
-If _GDBN__ does not produce an error message for invalid input,
-that is a bug.  However, you should note that your idea of
-``invalid input'' might be our idea of ``an extension'' or ``support
-for traditional practice''.
-
-@item
-If you are an experienced user of debugging tools, your suggestions
-for improvement of _GDBN__ are welcome in any case.
-@end itemize
-
-@node Bug Reporting,  , Bug Criteria, _GDBN__ Bugs
-@section How to Report Bugs
-@cindex Bug Reports
-@cindex Compiler Bugs, Reporting
-
-A number of companies and individuals offer support for GNU products.
-If you obtained _GDBN__ from a support organization, we recommend you
-contact that organization first. 
-
-Contact information for many support companies and individuals is
-available in the file @file{etc/SERVICE} in the GNU Emacs distribution.
-
-In any event, we also recommend that you send bug reports for _GDBN__ to one
-of these addresses:
-
-@example
-bug-gdb@@prep.ai.mit.edu
-@{ucbvax|mit-eddie|uunet@}!prep.ai.mit.edu!bug-gdb
-@end example
-
-@strong{Do not send bug reports to @samp{info-gdb}, or to
-@samp{help-gdb}, or to any newsgroups.} Most users of _GDBN__ do not want to
-receive bug reports.  Those that do, have arranged to receive @samp{bug-gdb}.
-
-The mailing list @samp{bug-gdb} has a newsgroup which serves as a
-repeater.  The mailing list and the newsgroup carry exactly the same
-messages.  Often people think of posting bug reports to the newsgroup
-instead of mailing them.  This appears to work, but it has one problem
-which can be crucial: a newsgroup posting often lacks a mail path
-back to the sender.  Thus, if we need to ask for more information, we
-may be unable to reach you.  For this reason, it is better to send bug
-reports to the mailing list.
-
-As a last resort, send bug reports on paper to:
-
-@example
-GNU Debugger Bugs
-545 Tech Square
-Cambridge, MA 02139
-@end example
-
-The fundamental principle of reporting bugs usefully is this:
-@strong{report all the facts}.  If you are not sure whether to state a
-fact or leave it out, state it!
-
-Often people omit facts because they think they know what causes the
-problem and assume that some details don't matter.  Thus, you might
-assume that the name of the variable you use in an example does not matter.
-Well, probably it doesn't, but one cannot be sure.  Perhaps the bug is a
-stray memory reference which happens to fetch from the location where that
-name is stored in memory; perhaps, if the name were different, the contents
-of that location would fool the debugger into doing the right thing despite
-the bug.  Play it safe and give a specific, complete example.  That is the
-easiest thing for you to do, and the most helpful.
-
-Keep in mind that the purpose of a bug report is to enable us to fix
-the bug if it is new to us.  It isn't as important what happens if
-the bug is already known.  Therefore, always write your bug reports on
-the assumption that the bug has not been reported previously.
-
-Sometimes people give a few sketchy facts and ask, ``Does this ring a
-bell?''  Those bug reports are useless, and we urge everyone to
-@emph{refuse to respond to them} except to chide the sender to report
-bugs properly.
-
-To enable us to fix the bug, you should include all these things:
-
-@itemize @bullet
-@item
-The version of _GDBN__.  _GDBN__ announces it if you start with no
-arguments; you can also print it at any time using @code{show version}.
-
-Without this, we won't know whether there is any point in looking for
-the bug in the current version of _GDBN__.
-
-@item
-A complete input script, and all necessary source files, that will
-reproduce the bug.  
-
-@item
-What compiler (and its version) was used to compile _GDBN__---e.g.
-``_GCC__-1.37.1''.
-
-@item
-The command arguments you gave the compiler to compile your example and
-observe the bug.  For example, did you use @samp{-O}?  To guarantee
-you won't omit something important, list them all.
-
-If we were to try to guess the arguments, we would probably guess wrong
-and then we might not encounter the bug.
-
-@item
-The type of machine you are using, and the operating system name and
-version number.
-
-@item
-A description of what behavior you observe that you believe is
-incorrect.  For example, ``It gets a fatal signal.''
-
-Of course, if the bug is that _GDBN__ gets a fatal signal, then we will
-certainly notice it.  But if the bug is incorrect output, we might not
-notice unless it is glaringly wrong.  We are human, after all.  You
-might as well not give us a chance to make a mistake.
-
-Even if the problem you experience is a fatal signal, you should still
-say so explicitly.  Suppose something strange is going on, such as,
-your copy of _GDBN__ is out of synch, or you have encountered a
-bug in the C library on your system.  (This has happened!)  Your copy
-might crash and ours would not.  If you told us to expect a crash,
-then when ours fails to crash, we would know that the bug was not
-happening for us.  If you had not told us to expect a crash, then we
-would not be able to draw any conclusion from our observations.
-
-@item
-If you wish to suggest changes to the _GDBN__ source, send us context
-diffs.  If you even discuss something in the _GDBN__ source, refer to
-it by context, not by line number.
-
-The line numbers in our development sources won't match those in your
-sources.  Your line numbers would convey no useful information to us.
-
-@end itemize
-
-Here are some things that are not necessary:
-
-@itemize @bullet
-@item
-A description of the envelope of the bug.
-
-Often people who encounter a bug spend a lot of time investigating
-which changes to the input file will make the bug go away and which
-changes will not affect it.
-
-This is often time consuming and not very useful, because the way we
-will find the bug is by running a single example under the debugger
-with breakpoints, not by pure deduction from a series of examples.
-We recommend that you save your time for something else.
-
-Of course, if you can find a simpler example to report @emph{instead}
-of the original one, that is a convenience for us.  Errors in the
-output will be easier to spot, running under the debugger will take
-less time, etc. 
-
-However, simplification is not vital; if you don't want to do this,
-report the bug anyway and send us the entire test case you used.
-
-@item
-A patch for the bug.
-
-A patch for the bug does help us if it is a good one.  But don't omit
-the necessary information, such as the test case, on the assumption that
-a patch is all we need.  We might see problems with your patch and decide
-to fix the problem another way, or we might not understand it at all.
-
-Sometimes with a program as complicated as _GDBN__ it is very hard to
-construct an example that will make the program follow a certain path
-through the code.  If you don't send us the example, we won't be able
-to construct one, so we won't be able to verify that the bug is fixed.
-
-And if we can't understand what bug you are trying to fix, or why your
-patch should be an improvement, we won't install it.  A test case will
-help us to understand.
-
-@item
-A guess about what the bug is or what it depends on.
-
-Such guesses are usually wrong.  Even we can't guess right about such
-things without first using the debugger to find the facts.
-@end itemize
index 4cbb8f4..e69de29 100755 (executable)
@@ -1,178 +0,0 @@
-_dnl__ Copyright (c) 1988 1989 1990 1991 Free Software Foundation, Inc.
-_dnl__ This file is part of the source for the GDB manual.
-@c M4 FRAGMENT: $Id$
-@node Sequences, Emacs, Controlling _GDBN__, Top
-@chapter Canned Sequences of Commands
-
-Aside from breakpoint commands (@pxref{Break Commands}), _GDBN__ provides two
-ways to store sequences of commands for execution as a unit:
-user-defined commands and command files.
-
-@menu
-* Define::                     User-Defined Commands
-* Command Files::              Command Files
-* Output::                     Commands for Controlled Output
-@end menu
-
-@node Define, Command Files, Sequences, Sequences
-@section User-Defined Commands
-
-@cindex user-defined command
-A @dfn{user-defined command} is a sequence of _GDBN__ commands to which you
-assign a new name as a command.  This is done with the @code{define}
-command.
-
-@table @code
-@item define @var{commandname}
-@kindex define
-Define a command named @var{commandname}.  If there is already a command
-by that name, you are asked to confirm that you want to redefine it.
-
-The definition of the command is made up of other _GDBN__ command lines,
-which are given following the @code{define} command.  The end of these
-commands is marked by a line containing @code{end}.
-
-@item document @var{commandname}
-@kindex document
-Give documentation to the user-defined command @var{commandname}.  The
-command @var{commandname} must already be defined.  This command reads
-lines of documentation just as @code{define} reads the lines of the
-command definition, ending with @code{end}.  After the @code{document}
-command is finished, @code{help} on command @var{commandname} will print
-the documentation you have specified.
-
-You may use the @code{document} command again to change the
-documentation of a command.  Redefining the command with @code{define}
-does not change the documentation.
-
-@item help user-defined
-@kindex help user-defined
-List all user-defined commands, with the first line of the documentation
-(if any) for each.
-
-@item info user
-@itemx info user @var{commandname}
-@kindex info user
-Display the _GDBN__ commands used to define @var{commandname} (but not its
-documentation).  If no @var{commandname} is given, display the
-definitions for all user-defined commands.
-@end table
-
-User-defined commands do not take arguments.  When they are executed, the
-commands of the definition are not printed.  An error in any command
-stops execution of the user-defined command.
-
-Commands that would ask for confirmation if used interactively proceed
-without asking when used inside a user-defined command.  Many _GDBN__ commands
-that normally print messages to say what they are doing omit the messages
-when used in a user-defined command.
-
-@node Command Files, Output, Define, Sequences
-@section Command Files
-
-@cindex command files
-A command file for _GDBN__ is a file of lines that are _GDBN__ commands.  Comments
-(lines starting with @kbd{#}) may also be included.  An empty line in a
-command file does nothing; it does not mean to repeat the last command, as
-it would from the terminal.
-
-@cindex init file
-@cindex @file{_GDBINIT__}
-When you start _GDBN__, it automatically executes commands from its
-@dfn{init files}.  These are files named @file{_GDBINIT__}.  _GDBN__
-reads the init file (if any) in your home directory and then the init
-file (if any) in the current working directory.  (The init files are not
-executed if you use the @samp{-nx} option; @pxref{Mode Options}.)  You
-can also request the execution of a command file with the @code{source}
-command:
-
-@table @code
-@item source @var{filename}
-@kindex source
-Execute the command file @var{filename}.
-@end table
-
-The lines in a command file are executed sequentially.  They are not
-printed as they are executed.  An error in any command terminates execution
-of the command file.
-
-Commands that would ask for confirmation if used interactively proceed
-without asking when used in a command file.  Many _GDBN__ commands that
-normally print messages to say what they are doing omit the messages
-when called from command files.
-
-@node Output,  , Command Files, Sequences
-@section Commands for Controlled Output
-
-During the execution of a command file or a user-defined command, normal
-_GDBN__ output is suppressed; the only output that appears is what is
-explicitly printed by the commands in the definition.  This section
-describes three commands useful for generating exactly the output you
-want.
-
-@table @code
-@item echo @var{text}
-@kindex echo
-@c I don't consider backslash-space a standard C escape sequence
-@c because it's not in ANSI.
-Print @var{text}.  Nonprinting characters can be included in @var{text}
-using C escape sequences, such as @samp{\n} to print a newline.  @b{No
-newline will be printed unless you specify one.} In addition to the
-standard C escape sequences, a backslash followed by a space stands for a
-space.  This is useful for outputting a string with spaces at the
-beginning or the end, since leading and trailing spaces are otherwise
-trimmed from all arguments.  Thus, to print @samp{@ and foo =@ }, use the
-command @samp{echo \@ and foo = \@ }.
-@c FIXME: verify hard copy actually issues enspaces for '@ '!  Will this
-@c        confuse texinfo?
-
-A backslash at the end of @var{text} can be used, as in C, to continue
-the command onto subsequent lines.  For example,
-
-@example
-echo This is some text\n\
-which is continued\n\
-onto several lines.\n
-@end example
-
-produces the same output as
-
-@example
-echo This is some text\n
-echo which is continued\n
-echo onto several lines.\n
-@end example
-
-@item output @var{expression}
-@kindex output
-Print the value of @var{expression} and nothing but that value: no
-newlines, no @samp{$@var{nn} = }.  The value is not entered in the
-value history either.  @xref{Expressions} for more information on
-expressions. 
-
-@item output/@var{fmt} @var{expression}
-Print the value of @var{expression} in format @var{fmt}.  You can use
-the same formats as for @code{print}; @pxref{Output formats}, for more
-information.
-
-@item printf @var{string}, @var{expressions}@dots{}
-@kindex printf
-Print the values of the @var{expressions} under the control of
-@var{string}.  The @var{expressions} are separated by commas and may
-be either numbers or pointers.  Their values are printed as specified
-by @var{string}, exactly as if the program were to execute
-
-@example
-printf (@var{string}, @var{expressions}@dots{});
-@end example
-
-For example, you can print two values in hex like this:
-
-@example
-printf "foo, bar-foo = 0x%x, 0x%x\n", foo, bar-foo
-@end example
-
-The only backslash-escape sequences that you can use in the format
-string are the simple ones that consist of backslash followed by a
-letter.
-@end table
index 1020258..e69de29 100755 (executable)
@@ -1,160 +0,0 @@
-_dnl__ Copyright (c) 1988 1989 1990 1991 Free Software Foundation, Inc.
-_dnl__ This file is part of the source for the GDB manual.
-@c M4 FRAGMENT: $Id$
-@node Commands, Running, Invocation, Top
-@chapter _GDBN__ Commands
-
-@menu
-* Command Syntax::             Command Syntax
-* Help::                       Getting Help
-@end menu
-
-@node Command Syntax, Help, Commands, Commands
-@section Command Syntax
-A _GDBN__ command is a single line of input.  There is no limit on how long
-it can be.  It starts with a command name, which is followed by arguments
-whose meaning depends on the command name.  For example, the command
-@code{step} accepts an argument which is the number of times to step,
-as in @samp{step 5}.  You can also use the @code{step} command with
-no arguments.  Some command names do not allow any arguments.
-
-@cindex abbreviation
-_GDBN__ command names may always be truncated if that abbreviation is
-unambiguous.  Other possible command abbreviations are listed in the
-documentation for individual commands.  Sometimes even ambiguous
-abbreviations are allowed; for example, @code{s} is specially defined as
-equivalent to @code{step} even though there are other commands whose
-names start with @code{s}.
-
-@cindex repeating commands
-A blank line as input to _GDBN__ means to repeat the previous command.
-Certain commands (for example, @code{run}) will not repeat this way;
-these are commands for which unintentional repetition might cause
-trouble and which you are unlikely to want to repeat.
-
-The @code{list} and @code{x} commands construct new arguments when
-repeated, rather than repeating exactly as typed, to permit easy
-scanning of source or memory.
-
-@kindex #
-@cindex comment
-A line of input starting with @kbd{#} is a comment; it does nothing.
-This is useful mainly in command files (@xref{Command Files}).
-
-@node Help,  , Command Syntax, Commands
-@section Getting Help
-@cindex online documentation
-@kindex help
-You can always ask _GDBN__ itself for information on its commands, using the
-command @code{help}.  
-
-@table @code
-@item help
-@itemx h
-@kindex h
-You can use @code{help} (abbreviated @code{h}) with no arguments to
-display a short list of named categories of commands:
-@smallexample
-(_GDBP__) help
-List of classes of commands:
-
-running -- Running the program
-stack -- Examining the stack
-data -- Examining data
-breakpoints -- Making program stop at certain points
-files -- Specifying and examining files
-status -- Status inquiries
-support -- Support facilities
-user-defined -- User-defined commands
-aliases -- Aliases of other commands
-obscure -- Obscure features
-
-Type "help" followed by a class name for a list of commands in that class.
-Type "help" followed by command name for full documentation.
-Command name abbreviations are allowed if unambiguous.
-(_GDBP__) 
-@end smallexample
-
-@item help @var{category}
-Using one of the general help categories as an argument, you can get a
-list of the individual commands in a category.  For example, here is the
-help display for category @code{status}:
-@smallexample
-(_GDBP__) help status
-Status inquiries.
-
-List of commands:
-
-show -- Generic command for showing things set with "set"
-info -- Generic command for printing status
-
-Type "help" followed by command name for full documentation.
-Command name abbreviations are allowed if unambiguous.
-(_GDBP__) 
-@end smallexample
-
-@item help @var{command}
-With a command name as @code{help} argument, _GDBN__ will display a
-short paragraph on how to use that command.  
-@end table
-
-In addition to @code{help}, you can use the _GDBN__ commands @code{info}
-and @code{show} to inquire about the state of your program, or the state
-of _GDBN__ itself.  Both commands support many topics of inquiry; this
-manual introduces each of them in the appropriate context.  The listings
-under @code{info} and under @code{show} in the Index point to
-all the sub-commands.
-@c FIXME: @pxref{Index} used to be here, but even though it shows up in
-@c FIXME...the 'aux' file with a pageno the xref can't find it.  
-
-@c @group
-@table @code
-@item info
-@kindex info
-@kindex i
-This command (abbreviated @code{i}) is for describing the state of your
-program; for example, it can list the arguments given to your program
-(@code{info args}), the registers currently in use (@code{info
-registers}), or the breakpoints you've set (@code{info breakpoints}).
-You can get a complete list of the @code{info} sub-commands with
-@w{@code{help info}}.
-
-@kindex show
-@item show
-In contrast, @code{show} is for describing the state of _GDBN__ itself.
-You can change most of the things you can @code{show}, by using the
-related command @code{set}; for example, you can control what number
-system is used for displays with @code{set radix}, or simply inquire
-which is currently in use with @code{show radix}.  
-
-@kindex info set
-To display all the settable parameters and their current
-values, you can use @code{show} with no arguments; you may also use
-@code{info set}.  Both commands produce the same display.
-@c FIXME: "info set" violates the rule that "info" is for state of
-@c FIXME...program.  Ck w/ GNU: "info set" to be called something else,
-@c FIXME...or change desc of rule---eg "state of prog and debugging session"?
-@end table
-@c @end group
-
-Here are three miscellaneous @code{show} subcommands, all of which are
-exceptional in lacking corresponding @code{set} commands:
-
-@table @code
-@kindex show version
-@item show version
-Show what version of _GDBN__ is running.  You should include this
-information in _GDBN__ bug-reports.  If multiple versions of _GDBN__ are
-in use at your site, you may occasionally want to make sure what version
-of _GDBN__ you're running; as _GDBN__ evolves, new commands are
-introduced, and old ones may wither away.  The version number is also
-announced when you start _GDBN__ with no arguments.
-
-@kindex show copying
-@item show copying
-Display information about permission for copying _GDBN__.
-
-@kindex show warranty
-@item show warranty
-Display the GNU ``NO WARRANTY'' statement.
-@end table
index 4ff4a16..e69de29 100755 (executable)
@@ -1,306 +0,0 @@
-_dnl__ Copyright (c) 1988 1989 1990 1991 Free Software Foundation, Inc.
-_dnl__ This file is part of the source for the GDB manual.
-@c M4 FRAGMENT: $Id$
-@node Controlling _GDBN__, Sequences, Targets, Top
-@chapter Controlling _GDBN__
-
-You can alter many aspects of _GDBN__'s interaction with you by using
-the @code{set} command.  For commands controlling how _GDBN__ displays
-data, @pxref{Print Settings}; other settings are described here.
-
-@menu
-* Prompt::                     Prompt
-* Editing::                    Command Editing
-* History::                    Command History
-* Screen Size::                        Screen Size
-* Numbers::                    Numbers
-* Messages/Warnings::          Optional Warnings and Messages
-@end menu
-
-@node Prompt, Editing, Controlling _GDBN__, Controlling _GDBN__
-@section Prompt
-@cindex prompt
-_GDBN__ indicates its readiness to read a command by printing a string
-called the @dfn{prompt}.  This string is normally @samp{(_GDBP__)}.  You
-can change the prompt string with the @code{set prompt} command.  For
-instance, when debugging _GDBN__ with _GDBN__, it is useful to change
-the prompt in one of the _GDBN__<>s so that you can always tell which
-one you are talking to.
-
-@table @code
-@item set prompt @var{newprompt}
-@kindex set prompt
-Directs _GDBN__ to use @var{newprompt} as its prompt string henceforth.
-@kindex show prompt
-@item show prompt
-Prints a line of the form: @samp{Gdb's prompt is: @var{your-prompt}}
-@end table
-
-@node Editing, History, Prompt, Controlling _GDBN__
-@section Command Editing
-@cindex readline
-@cindex command line editing
-_GDBN__ reads its input commands via the @dfn{readline} interface.  This
-GNU library provides consistent behavior for programs which provide a
-command line interface to the user.  Advantages are @code{emacs}-style
-or @code{vi}-style inline editing of commands, @code{csh}-like history
-substitution, and a storage and recall of command history across
-debugging sessions.
-
-You may control the behavior of command line editing in _GDBN__ with the
-command @code{set}.  
-
-@table @code
-@kindex set editing
-@cindex editing
-@item set editing
-@itemx set editing on
-Enable command line editing (enabled by default).
-
-@item set editing off
-Disable command line editing.
-
-@kindex show editing
-@item show editing
-Show whether command line editing is enabled.
-@end table
-
-@node History, Screen Size, Editing, Controlling _GDBN__
-@section Command History
-@table @code
-@cindex history substitution
-@cindex history file
-@kindex set history filename
-@item set history filename @var{fname}
-Set the name of the _GDBN__ command history file to @var{fname}.  This is
-the file from which _GDBN__ will read an initial command history
-list or to which it will write this list when it exits.  This list is
-accessed through history expansion or through the history
-command editing characters listed below.  This file defaults to the
-value of the environment variable @code{GDBHISTFILE}, or to
-@file{./.gdb_history} if this variable is not set.
-
-@cindex history save
-@kindex set history save
-@item set history save
-@itemx set history save on
-Record command history in a file, whose name may be specified with the
-@code{set history filename} command.  By default, this option is disabled.
-
-@item set history save off
-Stop recording command history in a file.
-
-@cindex history size
-@kindex set history size
-@item set history size @var{size}
-Set the number of commands which _GDBN__ will keep in its history list.
-This defaults to the value of the environment variable
-@code{HISTSIZE}, or to 256 if this variable is not set.
-@end table
-
-@cindex history expansion
-History expansion assigns special meaning to the character @kbd{!}.
-@iftex
-(@xref{Event Designators}.)
-@end iftex
-Since @kbd{!} is also the logical not operator in C, history expansion
-is off by default. If you decide to enable history expansion with the
-@code{set history expansion on} command, you may sometimes need to
-follow @kbd{!} (when it is used as logical not, in an expression) with
-a space or a tab to prevent it from being expanded.  The readline
-history facilities will not attempt substitution on the strings
-@kbd{!=} and @kbd{!(}, even when history expansion is enabled.
-
-The commands to control history expansion are:
-
-@table @code
-
-@kindex set history expansion
-@item set history expansion on
-@itemx set history expansion
-Enable history expansion.  History expansion is off by default.
-
-@item set history expansion off
-Disable history expansion.
-
-The readline code comes with more complete documentation of
-editing and history expansion features.  Users unfamiliar with @code{emacs}
-or @code{vi} may wish to read it. 
-@iftex
-@xref{Command Line Editing}.
-@end iftex
-
-@c @group
-@kindex show history
-@item show history
-@itemx show history filename
-@itemx show history save
-@itemx show history size
-@itemx show history expansion
-These commands display the state of the _GDBN__ history parameters.
-@code{show history} by itself displays all four states.
-@c @end group
-
-@end table
-
-@table @code
-@kindex show commands
-@item show commands
-Display the last ten commands in the command history.
-
-@item show commands @var{n}
-Print ten commands centered on command number @var{n}.
-
-@item show commands +
-Print ten commands just after the commands last printed.
-
-@end table
-
-@node Screen Size, Numbers, History, Controlling _GDBN__
-@section Screen Size
-@cindex size of screen
-@cindex pauses in output
-Certain commands to _GDBN__ may produce large amounts of information
-output to the screen.  To help you read all of it, _GDBN__ pauses and
-asks you for input at the end of each page of output.  Type @key{RET}
-when you want to continue the output.  _GDBN__ also uses the screen
-width setting to determine when to wrap lines of output.  Depending on
-what is being printed, it tries to break the line at a readable place,
-rather than simply letting it overflow onto the following line.
-
-Normally _GDBN__ knows the size of the screen from the termcap data base
-together with the value of the @code{TERM} environment variable and the
-@code{stty rows} and @code{stty cols} settings. If this is not correct,
-you can override it with the @code{set height} and @code{set
-width} commands:
-
-@table @code
-@item set height @var{lpp}
-@itemx show height
-@itemx set width @var{cpl}
-@itemx show width
-@kindex set height
-@kindex set width
-@kindex show width
-@kindex show height
-These @code{set} commands specify a screen height of @var{lpp} lines and
-a screen width of @var{cpl} characters.  The associated @code{show}
-commands display the current settings.
-
-If you specify a height of zero lines, _GDBN__ will not pause during output
-no matter how long the output is.  This is useful if output is to a file
-or to an editor buffer.
-@end table
-
-@node Numbers, Messages/Warnings, Screen Size, Controlling _GDBN__
-@section Numbers
-@cindex number representation
-@cindex entering numbers
-You can always enter numbers in octal, decimal, or hexadecimal in _GDBN__ by
-the usual conventions: octal numbers begin with @samp{0}, decimal
-numbers end with @samp{.}, and hexadecimal numbers begin with @samp{0x}.
-Numbers that begin with none of these are, by default, entered in base
-10; likewise, the default display for numbers---when no particular
-format is specified---is base 10.  You can change the default base for
-both input and output with the @code{set radix} command.
-
-@table @code
-@kindex set radix
-@item set radix @var{base}
-Set the default base for numeric input and display.  Supported choices
-for @var{base} are decimal 8, 10, 16.  @var{base} must itself be
-specified either unambiguously or using the current default radix; for
-example, any of
-
-@example
-set radix 012
-set radix 10.
-set radix 0xa
-@end example
-
-@noindent
-will set the base to decimal.  On the other hand, @samp{set radix 10}
-will leave the radix unchanged no matter what it was.
-
-@kindex show radix
-@item show radix
-Display the current default base for numeric input and display.
-
-@end table
-
-@node Messages/Warnings,  , Numbers, Controlling _GDBN__
-@section Optional Warnings and Messages
-By default, _GDBN__ is silent about its inner workings.  If you are running
-on a slow machine, you may want to use the @code{set verbose} command.
-It will make _GDBN__ tell you when it does a lengthy internal operation, so
-you won't think it has crashed.
-
-Currently, the messages controlled by @code{set verbose} are those which
-announce that the symbol table for a source file is being read
-(@pxref{Files}, in the description of the command
-@code{symbol-file}).
-@c The following is the right way to do it, but emacs 18.55 doesn't support
-@c @ref, and neither the emacs lisp manual version of texinfmt or makeinfo
-@c is released.  
-@ignore
-see @code{symbol-file} in @ref{Files}).
-@end ignore
-
-@table @code
-@kindex set verbose
-@item set verbose on
-Enables _GDBN__'s output of certain informational messages.
-
-@item set verbose off
-Disables _GDBN__'s output of certain informational messages.
-
-@kindex show verbose
-@item show verbose
-Displays whether @code{set verbose} is on or off.
-@end table
-
-By default, if _GDBN__ encounters bugs in the symbol table of an object file,
-it prints a single message about each type of problem it finds, then 
-shuts up (@pxref{Symbol Errors}).  You can suppress these messages, or allow more than one such
-message to be printed if you want to see how frequent the problems are.
-
-@table @code
-@kindex set complaints
-@item set complaints @var{limit}
-Permits _GDBN__ to output @var{limit} complaints about each type of unusual
-symbols before becoming silent about the problem.  Set @var{limit} to
-zero to suppress all complaints; set it to a large number to prevent
-complaints from being suppressed.
-
-@kindex show complaints
-@item show complaints
-Displays how many symbol complaints _GDBN__ is permitted to produce.
-@end table
-
-By default, _GDBN__ is cautious, and asks what sometimes seem to be a
-lot of stupid questions to confirm certain commands.  For example, if
-you try to run a program which is already running:
-@example
-(_GDBP__) run
-The program being debugged has been started already.
-Start it from the beginning? (y or n) 
-@end example
-
-If you're willing to unflinchingly face the consequences of your own
-commands, you can disable this ``feature'':
-
-@table @code
-@kindex set confirm
-@cindex flinching
-@cindex confirmation
-@cindex stupid questions
-@item set confirm off
-Disables confirmation requests.
-
-@item set confirm on
-Enables confirmation requests (the default).
-
-@item show confirm
-@kindex show confirm
-Displays state of confirmation requests.
-@end table
index 9c74f60..e69de29 100755 (executable)
@@ -1,926 +0,0 @@
-_dnl__ Copyright (c) 1988 1989 1990 1991 Free Software Foundation, Inc.
-_dnl__ This file is part of the source for the GDB manual.
-@c M4 FRAGMENT: $Id$
-@node Data, Symbols, Source, Top
-@chapter Examining Data
-
-@cindex printing data
-@cindex examining data
-@kindex print
-@kindex inspect
-@c "inspect" isn't quite a synonym if you're using Epoch, which we don't
-@c document because it's nonstandard...  Under Epoch it displays in a
-@c different window or something like that.
-The usual way to examine data in your program is with the @code{print}
-command (abbreviated @code{p}), or its synonym @code{inspect}.  It
-evaluates and prints the value of any valid expression of the language
-the program is written in (for now, C or C++).  You type
-
-@example
-print @var{exp}
-@end example
-
-@noindent
-where @var{exp} is any valid expression (in the source language), and
-the value of @var{exp} is printed in a format appropriate to its data
-type.
-
-A more low-level way of examining data is with the @code{x} command.
-It examines data in memory at a specified address and prints it in a
-specified format.  @xref{Memory}.
-
-@menu
-* Expressions::                        Expressions
-* Variables::                  Program Variables
-* Arrays::                     Artificial Arrays
-* Output formats::             Output formats
-* Memory::                     Examining Memory
-* Auto Display::               Automatic Display
-* Print Settings::             Print Settings
-* Value History::              Value History
-* Convenience Vars::           Convenience Variables
-* Registers::                  Registers
-* Floating Point Hardware::    Floating Point Hardware
-@end menu
-
-@node Expressions, Variables, Data, Data
-@section Expressions
-
-@cindex expressions
-@code{print} and many other _GDBN__ commands accept an expression and
-compute its value.  Any kind of constant, variable or operator defined
-by the programming language you are using is legal in an expression in
-_GDBN__.  This includes conditional expressions, function calls, casts
-and string constants.  It unfortunately does not include symbols defined
-by preprocessor @code{#define} commands, or C++ expressions involving
-@samp{::}, the name resolution operator.
-@c FIXME: actually C++ a::b works except in obscure circumstances where it
-@c FIXME...can conflict with GDB's own name scope resolution.
-
-Casts are supported in all languages, not just in C, because it is so
-useful to cast a number into a pointer so as to examine a structure
-at that address in memory.
-
-_GDBN__ supports three kinds of operator in addition to those of programming
-languages:
-
-@table @code
-@item @@
-@samp{@@} is a binary operator for treating parts of memory as arrays.
-@xref{Arrays}, for more information.
-
-@item ::
-@samp{::} allows you to specify a variable in terms of the file or
-function where it is defined.  @xref{Variables}.
-
-@item @{@var{type}@} @var{addr}
-Refers to an object of type @var{type} stored at address @var{addr} in
-memory.  @var{addr} may be any expression whose value is an integer or
-pointer (but parentheses are required around binary operators, just as in
-a cast).  This construct is allowed regardless of what kind of data is
-normally supposed to reside at @var{addr}.@refill
-@end table
-
-@node Variables, Arrays, Expressions, Data
-@section Program Variables
-
-The most common kind of expression to use is the name of a variable
-in your program.
-
-Variables in expressions are understood in the selected stack frame
-(@pxref{Selection}); they must either be global (or static) or be visible
-according to the scope rules of the programming language from the point of
-execution in that frame.  This means that in the function
-
-@example
-foo (a)
-     int a;
-@{
-  bar (a);
-  @{
-    int b = test ();
-    bar (b);
-  @}
-@}
-@end example
-
-@noindent
-the variable @code{a} is usable whenever the program is executing
-within the function @code{foo}, but the variable @code{b} is visible
-only while the program is executing inside the block in which @code{b}
-is declared.
-
-@cindex variable name conflict
-There is an exception: you can refer to a variable or function whose
-scope is a single source file even if the current execution point is not
-in this file.  But it is possible to have more than one such variable or
-function with the same name (in different source files).  If that happens,
-referring to that name has unpredictable effects.  If you wish, you can
-specify a variable in a particular file, using the colon-colon notation:
-
-@cindex colon-colon
-@kindex ::
-@example
-@var{file}::@var{variable}
-@end example
-
-@noindent
-Here @var{file} is the name of the source file whose variable you want.
-
-@cindex C++ name resolution
-This use of @samp{::} is very rarely in conflict with the very similar
-use of the same notation in C++.  _GDBN__ also supports use of the C++
-name resolution operator in _GDBN__ expressions.
-
-@node Arrays, Output formats, Variables, Data
-@section Artificial Arrays
-
-@cindex artificial array
-@kindex @@
-It is often useful to print out several successive objects of the
-same type in memory; a section of an array, or an array of
-dynamically determined size for which only a pointer exists in the
-program.
-
-This can be done by constructing an @dfn{artificial array} with the
-binary operator @samp{@@}.  The left operand of @samp{@@} should be
-the first element of the desired array, as an individual object.
-The right operand should be the desired length of the array.  The result is
-an array value whose elements are all of the type of the left argument.
-The first element is actually the left argument; the second element
-comes from bytes of memory immediately following those that hold the
-first element, and so on.  Here is an example.  If a program says
-
-@example
-int *array = (int *) malloc (len * sizeof (int));
-@end example
-
-@noindent
-you can print the contents of @code{array} with
-
-@example
-p *array@@len
-@end example
-
-The left operand of @samp{@@} must reside in memory.  Array values made
-with @samp{@@} in this way behave just like other arrays in terms of
-subscripting, and are coerced to pointers when used in expressions.
-Artificial arrays most often appear in expressions via the value history
-(@pxref{Value History}), after printing one out.)
-
-@node Output formats, Memory, Arrays, Data
-@section Output formats
-
-@cindex formatted output
-@cindex output formats
-By default, _GDBN__ prints a value according to its data type.  Sometimes
-this is not what you want.  For example, you might want to print a number
-in hex, or a pointer in decimal.  Or you might want to view data in memory
-at a certain address as a character string or as an instruction.  To do
-these things, specify an @dfn{output format} when you print a value.
-
-The simplest use of output formats is to say how to print a value
-already computed.  This is done by starting the arguments of the
-@code{print} command with a slash and a format letter.  The format
-letters supported are:
-
-@table @code
-@item x
-Regard the bits of the value as an integer, and print the integer in
-hexadecimal.
-
-@item d
-Print as integer in signed decimal.
-
-@item u
-Print as integer in unsigned decimal.
-
-@item o
-Print as integer in octal.
-
-@item t
-Print as integer in binary.  The letter @samp{t} stands for ``two''.
-
-@item a
-Print as an address, both absolute in hex and as an offset from the
-nearest preceding symbol.  This format can be used to discover where (in
-what function) an unknown address is located:
-@example
-(_GDBP__) p/a 0x54320
-_0__$3 = 0x54320 <_initialize_vx+396>_1__
-@end example
-
-
-@item c
-Regard as an integer and print it as a character constant.
-
-@item f
-Regard the bits of the value as a floating point number and print
-using typical floating point syntax.
-@end table
-
-For example, to print the program counter in hex (@pxref{Registers}), type
-
-@example
-p/x $pc
-@end example
-
-@noindent
-Note that no space is required before the slash; this is because command
-names in _GDBN__ cannot contain a slash.
-
-To reprint the last value in the value history with a different format,
-you can use the @code{print} command with just a format and no
-expression.  For example, @samp{p/x} reprints the last value in hex.
-
-@node Memory, Auto Display, Output formats, Data
-@section Examining Memory
-
-@cindex examining memory
-@table @code
-@kindex x
-@item x/@var{nfu} @var{expr}
-The command @code{x} (for `examine') can be used to examine memory
-without being constrained by your program's data types.  You can specify
-the unit size @var{u} of memory to inspect, and a repeat count @var{n} of how
-many of those units to display.  @code{x} understands the formats
-@var{f} used by @code{print}; two additional formats, @samp{s} (string)
-and @samp{i} (machine instruction) can be used without specifying a unit
-size.
-@end table
-
-For example, @samp{x/3uh 0x54320} is a request to display three halfwords
-(@code{h}) of memory, formatted as unsigned decimal integers (@samp{u}),
-starting at address @code{0x54320}.  @samp{x/4xw $sp} prints the four
-words (@samp{w}) of memory above the stack pointer (here, @samp{$sp};
-@pxref{Registers}) in hexadecimal (@samp{x}).
-
-Since the letters indicating unit sizes are all distinct from the
-letters specifying output formats, you don't have to remember whether
-unit size or format comes first; either order will work.  The output
-specifications @samp{4xw} and @samp{4wx} mean exactly the same thing.
-
-After the format specification, you supply an expression for the address
-where _GDBN__ is to begin reading from memory.  The expression need not
-have a pointer value (though it may); it is always interpreted as an
-integer address of a byte of memory.  @xref{Expressions} for more
-information on expressions.
-
-These are the memory units @var{u} you can specify with the @code{x}
-command:
-
-@table @code
-@item b
-Examine individual bytes.
-
-@item h
-Examine halfwords (two bytes each).
-
-@item w
-Examine words (four bytes each).
-
-@cindex word
-Many assemblers and cpu designers still use `word' for a 16-bit quantity,
-as a holdover from specific predecessor machines of the 1970's that really
-did use two-byte words.  But more generally the term `word' has always
-referred to the size of quantity that a machine normally operates on and
-stores in its registers.  This is 32 bits for all the machines that _GDBN__
-runs on.
-
-@item g
-Examine giant words (8 bytes).
-@end table
-
-You can combine these unit specifications with any of the formats
-described for @code{print}.  @xref{Output formats}.
-
-@code{x} has two additional output specifications which derive the unit
-size from the data inspected:
-
-@table @code
-@item s
-Print a null-terminated string of characters.  Any explicitly specified
-unit size is ignored; instead, the unit is however many bytes it takes
-to reach a null character (including the null character).
-
-@item i
-Print a machine instruction in assembler syntax (or nearly).  Any
-specified unit size is ignored; the number of bytes in an instruction
-varies depending on the type of machine, the opcode and the addressing
-modes used.  The command @code{disassemble} gives an alternative way of
-inspecting machine instructions.  @xref{Machine Code}.
-@end table
-
-If you omit either the format @var{f} or the unit size @var{u}, @code{x}
-will use the same one that was used last.  If you don't use any letters
-or digits after the slash, you can omit the slash as well.
-
-You can also omit the address to examine.  Then the address used is just
-after the last unit examined.  This is why string and instruction
-formats actually compute a unit-size based on the data: so that the next
-string or instruction examined will start in the right place.  
-
-When the @code{print} command shows a value that resides in memory,
-@code{print} also sets the default address for the @code{x} command.
-@code{info line} also sets the default for @code{x}, to the address of
-the start of the machine code for the specified line (@pxref{Machine
-Code}), and @code{info breakpoints} sets it to the address of the last
-breakpoint listed (@pxref{Set Breaks}).
-
-When you use @key{RET} to repeat an @code{x} command, the address
-specified previously (if any) is ignored, so that the repeated command
-examines the successive locations in memory rather than the same ones.
-
-You can examine several consecutive units of memory with one command by
-writing a repeat-count after the slash (before the format letters, if
-any).  Omitting the repeat count @var{n} displays one unit of the
-appropriate size.  The repeat count must be a decimal integer.  It has
-the same effect as repeating the @code{x} command @var{n} times except
-that the output may be more compact, with several units per line.  For
-example,
-
-@example
-x/10i $pc
-@end example
-
-@noindent
-prints ten instructions starting with the one to be executed next in the
-selected frame.  After doing this, you could print a further seven
-instructions with
-
-@example
-x/7
-@end example
-
-@noindent
----where the format and address are allowed to default.
-
-@kindex $_
-@kindex $__
-The addresses and contents printed by the @code{x} command are not put
-in the value history because there is often too much of them and they
-would get in the way.  Instead, _GDBN__ makes these values available for
-subsequent use in expressions as values of the convenience variables
-@code{$_} and @code{$__}.  After an @code{x} command, the last address
-examined is available for use in expressions in the convenience variable
-@code{$_}.  The contents of that address, as examined, are available in
-the convenience variable @code{$__}.
-
-If the @code{x} command has a repeat count, the address and contents saved
-are from the last memory unit printed; this is not the same as the last
-address printed if several units were printed on the last line of output.
-
-@node Auto Display, Print Settings, Memory, Data
-@section Automatic Display
-@cindex automatic display
-@cindex display of expressions
-
-If you find that you want to print the value of an expression frequently
-(to see how it changes), you might want to add it to the @dfn{automatic
-display list} so that _GDBN__ will print its value each time the program stops.
-Each expression added to the list is given a number to identify it;
-to remove an expression from the list, you specify that number.
-The automatic display looks like this:
-
-@example
-2: foo = 38
-3: bar[5] = (struct hack *) 0x3804
-@end example
-
-@noindent
-showing item numbers, expressions and their current values.  As with
-displays you request manually using @code{x} or @code{print}, you can
-specify the output format you prefer; in fact, @code{display} decides
-whether to use @code{print} or @code{x} depending on how elaborate your
-format specification is---it uses @code{x} if you specify a unit size,
-or one of the two formats (@samp{i} and @samp{s}) that are only
-supported by @code{x}; otherwise it uses @code{print}.
-
-@table @code
-@item display @var{exp}
-@kindex display
-Add the expression @var{exp} to the list of expressions to display
-each time the program stops.  @xref{Expressions}.
-
-@code{display} will not repeat if you press @key{RET} again after using it.
-
-@item display/@var{fmt} @var{exp}
-For @var{fmt} specifying only a display format and not a size or
-count, add the expression @var{exp} to the auto-display list but
-arranges to display it each time in the specified format @var{fmt}.
-@xref{Output formats}.
-
-@item display/@var{fmt} @var{addr}
-For @var{fmt} @samp{i} or @samp{s}, or including a unit-size or a
-number of units, add the expression @var{addr} as a memory address to
-be examined each time the program stops.  Examining means in effect
-doing @samp{x/@var{fmt} @var{addr}}.  @xref{Memory}.
-@end table
-
-For example, @samp{display/i $pc} can be helpful, to see the machine
-instruction about to be executed each time execution stops (@samp{$pc}
-is a common name for the program counter; @pxref{Registers}).
-
-@table @code
-@item undisplay @var{dnums}@dots{}
-@itemx delete display @var{dnums}@dots{}
-@kindex delete display
-@kindex undisplay
-Remove item numbers @var{dnums} from the list of expressions to display.
-
-@code{undisplay} will not repeat if you press @key{RET} after using it.
-(Otherwise you would just get the error @samp{No display number @dots{}}.)
-
-@item disable display @var{dnums}@dots{}
-@kindex disable display
-Disable the display of item numbers @var{dnums}.  A disabled display
-item is not printed automatically, but is not forgotten.  It may be
-enabled again later.
-
-@item enable display @var{dnums}@dots{}
-@kindex enable display
-Enable display of item numbers @var{dnums}.  It becomes effective once
-again in auto display of its expression, until you specify otherwise.
-
-@item display
-Display the current values of the expressions on the list, just as is
-done when the program stops.
-
-@item info display
-@kindex info display
-Print the list of expressions previously set up to display
-automatically, each one with its item number, but without showing the
-values.  This includes disabled expressions, which are marked as such.
-It also includes expressions which would not be displayed right now
-because they refer to automatic variables not currently available.
-@end table
-
-If a display expression refers to local variables, then it does not make
-sense outside the lexical context for which it was set up.  Such an
-expression is disabled when execution enters a context where one of its
-variables is not defined.  For example, if you give the command
-@code{display last_char} while inside a function with an argument
-@code{last_char}, then this argument will be displayed while the program
-continues to stop inside that function.  When it stops elsewhere---where
-there is no variable @code{last_char}---display is disabled.  The next time
-your program stops where @code{last_char} is meaningful, you can enable the
-display expression once again.
-
-@node Print Settings, Value History, Auto Display, Data
-@section Print Settings
-
-@cindex format options
-@cindex print settings
-_GDBN__ provides the following ways to control how arrays, structures,
-and symbols are printed.  
-
-@noindent
-These settings are useful for debugging programs in any language:
-
-@table @code
-@item set print address
-@item set print address on
-@kindex set print address
-_GDBN__ will print memory addresses showing the location of stack
-traces, structure values, pointer values, breakpoints, and so forth,
-even when it also displays the contents of those addresses.  The default
-is on.  For example, this is what a stack frame display looks like, with
-@code{set print address on}:
-@smallexample
-(_GDBP__) f
-#0  set_quotes (lq=0x34c78 "<<", rq=0x34c88 ">>") 
-    at input.c:530
-530        if (lquote != def_lquote)
-@end smallexample
-
-@item set print address off
-Do not print addresses when displaying their contents.  For example,
-this is the same stack frame displayed with @code{set print address off}:
-@example
-(_GDBP__) set print addr off
-(_GDBP__) f
-#0  set_quotes (lq="<<", rq=">>") at input.c:530
-530        if (lquote != def_lquote)
-@end example
-
-@item show print address
-@kindex show print address
-Show whether or not addresses are to be printed.
-
-@item set print array
-@itemx set print array on
-@kindex set print array
-_GDBN__ will pretty print arrays.  This format is more convenient to read,
-but uses more space.  The default is off.
-
-@item set print array off.
-Return to compressed format for arrays.
-
-@item show print array
-@kindex show print array
-Show whether compressed or pretty format is selected for displaying
-arrays. 
-
-@item set print elements @var{number-of-elements}
-@kindex set print elements
-If _GDBN__ is printing a large array, it will stop printing after it has
-printed the number of elements set by the @code{set print elements} command.
-This limit also applies to the display of strings.
-
-@item show print elements
-@kindex show print elements
-Display the number of elements of a large array that _GDBN__ will print
-before losing patience.
-
-@item set print pretty on
-@kindex set print pretty
-Cause _GDBN__ to print structures in an indented format with one member per
-line, like this:
-
-@example
-$1 = @{
-  next = 0x0,
-  flags = @{
-    sweet = 1,
-    sour = 1
-  @},
-  meat = 0x54 "Pork"
-@}
-@end example
-
-@item set print pretty off
-Cause _GDBN__ to print structures in a compact format, like this:
-
-@smallexample
-$1 = @{next = 0x0, flags = @{sweet = 1, sour = 1@}, meat \
-= 0x54 "Pork"@}
-@end smallexample
-
-@noindent
-This is the default format.
-
-@item show print pretty
-@kindex show print pretty
-Show which format _GDBN__ will use to print structures.
-
-@item set print sevenbit-strings on
-Print using only seven-bit characters; if this option is set, 
-_GDBN__ will display any eight-bit characters (in strings or character
-values) using the notation @code{\}@var{nnn}.  For example, @kbd{M-a} is
-displayed as @code{\341}.
-
-@item set print sevenbit-strings off
-Print using either seven-bit or eight-bit characters, as required.  This
-is the default.
-
-@item show print sevenbit-strings
-Show whether or not _GDBN__ will print only seven-bit characters.
-
-@item set print union on
-@kindex set print union
-Tell _GDBN__ to print unions which are contained in structures.  This is the
-default setting.
-
-@item set print union off
-Tell _GDBN__ not to print unions which are contained in structures.
-
-@item show print union
-@kindex show print union
-Ask _GDBN__ whether or not it will print unions which are contained in
-structures. 
-
-For example, given the declarations
-
-@smallexample
-typedef enum @{Tree, Bug@} Species;
-typedef enum @{Big_tree, Acorn, Seedling@} Tree_forms;
-typedef enum @{Caterpillar, Cocoon, Butterfly@} Bug_forms;
-
-struct thing @{
-  Species it;
-  union @{
-    Tree_forms tree;
-    Bug_forms bug;
-  @} form;
-@};
-
-struct thing foo = @{Tree, @{Acorn@}@};
-@end smallexample
-
-@noindent
-with @code{set print union on} in effect @samp{p foo} would print
-
-@smallexample
-$1 = @{it = Tree, form = @{tree = Acorn, bug = Cocoon@}@}
-@end smallexample
-
-@noindent
-and with @code{set print union off} in effect it would print
-
-@smallexample
-$1 = @{it = Tree, form = @{...@}@}
-@end smallexample
-@end table
-
-@noindent
-These settings are of interest when debugging C++ programs:
-
-@table @code
-@item set print demangle 
-@itemx set print demangle on 
-@kindex set print demangle
-Print C++ names in their source form rather than in the mangled form
-in which they are passed to the assembler and linker for type-safe linkage.
-The default is on.
-
-@item show print demangle
-@kindex show print demangle
-Show whether C++ names will be printed in mangled or demangled form.
-
-@item set print asm-demangle 
-@itemx set print asm-demangle on 
-@kindex set print asm-demangle
-Print C++ names in their source form rather than their mangled form, even
-in assembler code printouts such as instruction disassemblies.
-The default is off.
-
-@item show print asm-demangle
-@kindex show print asm-demangle
-Show whether C++ names in assembly listings will be printed in mangled
-or demangled form.
-
-@item set print object
-@itemx set print object on
-@kindex set print object
-When displaying a pointer to an object, identify the @emph{actual}
-(derived) type of the object rather than the @emph{declared} type, using
-the virtual function table.
-
-@item set print object off
-Display only the declared type of objects, without reference to the
-virtual function table.  This is the default setting.
-
-@item show print object
-@kindex show print object
-Show whether actual, or declared, object types will be displayed.
-
-@item set print vtbl 
-@itemx set print vtbl on 
-@kindex set print vtbl
-Pretty print C++ virtual function tables.  The default is off.
-
-@item set print vtbl off
-Do not pretty print C++ virtual function tables.
-
-@item show print vtbl
-@kindex show print vtbl
-Show whether C++ virtual function tables are pretty printed, or not.
-
-@end table
-
-@node Value History, Convenience Vars, Print Settings, Data
-@section Value History
-
-@cindex value history
-Values printed by the @code{print} command are saved in _GDBN__'s @dfn{value
-history} so that you can refer to them in other expressions.  Values are
-kept until the symbol table is re-read or discarded (for example with
-the @code{file} or @code{symbol-file} commands).  When the symbol table
-changes, the value history is discarded, since the values may contain
-pointers back to the types defined in the symbol table.
-
-@cindex @code{$}
-@cindex @code{$$}
-@cindex history number
-The values printed are given @dfn{history numbers} for you to refer to them
-by.  These are successive integers starting with one.  @code{print} shows you
-the history number assigned to a value by printing @samp{$@var{num} = }
-before the value; here @var{num} is the history number.
-
-To refer to any previous value, use @samp{$} followed by the value's
-history number.  The way @code{print} labels its output is designed to
-remind you of this.  Just @code{$} refers to the most recent value in
-the history, and @code{$$} refers to the value before that.
-@code{$$@var{n}} refers to the @var{n}th value from the end; @code{$$2}
-is the value just prior to @code{$$}, @code{$$1} is equivalent to
-@code{$$}, and @code{$$0} is equivalent to @code{$}.
-
-For example, suppose you have just printed a pointer to a structure and
-want to see the contents of the structure.  It suffices to type
-
-@example
-p *$
-@end example
-
-If you have a chain of structures where the component @code{next} points
-to the next one, you can print the contents of the next one with this:
-
-@example
-p *$.next
-@end example
-
-@noindent
-You can print successive links in the chain by repeating this
-command---which you can do by just typing @key{RET}.
-
-Note that the history records values, not expressions.  If the value of
-@code{x} is 4 and you type these commands:
-
-@example
-print x
-set x=5
-@end example
-
-@noindent
-then the value recorded in the value history by the @code{print} command
-remains 4 even though the value of @code{x} has changed.
-
-@table @code
-@kindex show values
-@item show values
-Print the last ten values in the value history, with their item numbers.
-This is like @samp{p@ $$9} repeated ten times, except that @code{show
-values} does not change the history.
-
-@item show values @var{n}
-Print ten history values centered on history item number @var{n}.
-
-@item show values +
-Print ten history values just after the values last printed.  If no more
-values are available, produces no display.
-@end table
-
-Pressing @key{RET} to repeat @code{show values @var{n}} has exactly the
-same effect as @samp{show values +}.  
-
-@node Convenience Vars, Registers, Value History, Data
-@section Convenience Variables
-
-@cindex convenience variables
-_GDBN__ provides @dfn{convenience variables} that you can use within
-_GDBN__ to hold on to a value and refer to it later.  These variables
-exist entirely within _GDBN__; they are not part of your program, and
-setting a convenience variable has no direct effect on further execution
-of your program.  That's why you can use them freely.
-
-Convenience variables are prefixed with @samp{$}.  Any name preceded by
-@samp{$} can be used for a convenience variable, unless it is one of
-the predefined machine-specific register names (@pxref{Registers}).
-(Value history references, in contrast, are @emph{numbers} preceded
-by @samp{$}.  @xref{Value History}.)
-
-You can save a value in a convenience variable with an assignment
-expression, just as you would set a variable in your program.  Example:
-
-@example
-set $foo = *object_ptr
-@end example
-
-@noindent
-would save in @code{$foo} the value contained in the object pointed to by
-@code{object_ptr}.
-
-Using a convenience variable for the first time creates it; but its value
-is @code{void} until you assign a new value.  You can alter the value with
-another assignment at any time.
-
-Convenience variables have no fixed types.  You can assign a convenience
-variable any type of value, including structures and arrays, even if
-that variable already has a value of a different type.  The convenience
-variable, when used as an expression, has the type of its current value.
-
-@table @code
-@item show convenience
-@kindex show convenience
-Print a list of convenience variables used so far, and their values.
-Abbreviated @code{show con}.
-@end table
-
-One of the ways to use a convenience variable is as a counter to be
-incremented or a pointer to be advanced.  For example, to print
-a field from successive elements of an array of structures:
-
-_0__@example
-set $i = 0
-print bar[$i++]->contents
-@i{@dots{} repeat that command by typing @key{RET}.}
-_1__@end example
-
-Some convenience variables are created automatically by _GDBN__ and given
-values likely to be useful.
-
-@table @code
-@item $_
-The variable @code{$_} is automatically set by the @code{x} command to
-the last address examined (@pxref{Memory}).  Other commands which
-provide a default address for @code{x} to examine also set @code{$_}
-to that address; these commands include @code{info line} and @code{info
-breakpoint}.
-
-@item $__
-The variable @code{$__} is automatically set by the @code{x} command
-to the value found in the last address examined.
-@end table
-
-@node Registers, Floating Point Hardware, Convenience Vars, Data
-@section Registers
-
-@cindex registers
-Machine register contents can be referred to in expressions as variables
-with names starting with @samp{$}.  The names of registers are different
-for each machine; use @code{info registers} to see the names used on
-your machine.  
-
-@table @code
-@item info registers
-@kindex info registers
-Print the names and values of all registers (in the selected stack frame).
-
-@item info registers @var{regname}
-Print the relativized value of register @var{regname}.  @var{regname}
-may be any register name valid on the machine you are using, with
-or without the initial @samp{$}.
-@end table
-
-The register names @code{$pc} and @code{$sp} are used on most machines
-for the program counter register and the stack pointer.  For example,
-you could print the program counter in hex with
-@example
-p/x $pc
-@end example
-
-@noindent
-or print the instruction to be executed next with
-@example
-x/i $pc
-@end example
-
-@noindent
-or add four to the stack pointer with
-@example
-set $sp += 4
-@end example
-
-@noindent
-The last is a way of removing one word from the stack, on machines where
-stacks grow downward in memory (most machines, nowadays).  This assumes
-that the innermost stack frame is selected; setting @code{$sp} is
-not allowed when other stack frames are selected.  (To pop entire frames
-off the stack, regardless of machine architecture, use @code{return};
-@pxref{Returning}.)
-
-Often @code{$fp} is used for a register that contains a pointer to the
-current stack frame, and @code{$ps} is sometimes used for a register
-that contains the processor status.  These standard register names may
-be available on your machine even though the @code{info registers}
-command shows other names.  For example, on the SPARC, @code{info
-registers} displays the processor status register as @code{$psr} but you
-can also refer to it as @code{$ps}.
-
-_GDBN__ always considers the contents of an ordinary register as an
-integer when the register is examined in this way.  Some machines have
-special registers which can hold nothing but floating point; these
-registers are considered to have floating point values.  There is no way
-to refer to the contents of an ordinary register as floating point value
-(although you can @emph{print} it as a floating point value with
-@samp{print/f $@var{regname}}).
-
-Some registers have distinct ``raw'' and ``virtual'' data formats.  This
-means that the data format in which the register contents are saved by
-the operating system is not the same one that your program normally
-sees.  For example, the registers of the 68881 floating point
-coprocessor are always saved in ``extended'' (raw) format, but all C
-programs expect to work with ``double'' (virtual) format.  In such
-cases, _GDBN__ normally works with the virtual format only (the format that
-makes sense for your program), but the @code{info registers} command
-prints the data in both formats.
-
-Normally, register values are relative to the selected stack frame
-(@pxref{Selection}).  This means that you get the value that the
-register would contain if all stack frames farther in were exited and
-their saved registers restored.  In order to see the true contents of
-hardware registers, you must select the innermost frame (with
-@samp{frame 0}).
-
-However, _GDBN__ must deduce where registers are saved, from the machine
-code generated by your compiler.  If some registers are not saved, or if
-_GDBN__ is unable to locate the saved registers, the selected stack
-frame will make no difference.
-
-@node Floating Point Hardware,  , Registers, Data
-@section Floating Point Hardware
-@cindex floating point
-Depending on the host machine architecture, _GDBN__ may be able to give
-you more information about the status of the floating point hardware.
-
-@table @code
-@item info float
-@kindex info float
-If available, provides hardware-dependent information about the floating
-point unit.  The exact contents and layout vary depending on the
-floating point chip.
-@end table
-@c FIXME: this is a cop-out.  Try to get examples, explanations.  Only
-@c FIXME...supported currently on arm's and 386's.  Mark properly with 
-@c FIXME... m4 macros to isolate general statements from hardware-dep, 
-@c FIXME... at that point.
index 855371e..e69de29 100755 (executable)
@@ -1,166 +0,0 @@
-_dnl__                                                         -*- Texinfo -*-
-_dnl__ Copyright (c) 1988 1989 1990 1991 Free Software Foundation, Inc.
-_dnl__ This file is part of the source for the GDB manual.
-@c M4 FRAGMENT: $Id$
-@node Emacs, _GDBN__ Bugs, Sequences, Top
-@chapter Using _GDBN__ under GNU Emacs
-
-@cindex emacs
-A special interface allows you to use GNU Emacs to view (and
-edit) the source files for the program you are debugging with
-_GDBN__.
-
-To use this interface, use the command @kbd{M-x gdb} in Emacs.  Give the
-executable file you want to debug as an argument.  This command starts
-_GDBN__ as a subprocess of Emacs, with input and output through a newly
-created Emacs buffer.
-
-Using _GDBN__ under Emacs is just like using _GDBN__ normally except for two
-things:
-
-@itemize @bullet
-@item
-All ``terminal'' input and output goes through the Emacs buffer.  
-@end itemize
-
-This applies both to _GDBN__ commands and their output, and to the input
-and output done by the program you are debugging.
-
-This is useful because it means that you can copy the text of previous
-commands and input them again; you can even use parts of the output
-in this way.
-
-All the facilities of Emacs' Shell mode are available for this purpose.
-
-@itemize @bullet
-@item
-_GDBN__ displays source code through Emacs.  
-@end itemize
-
-Each time _GDBN__ displays a stack frame, Emacs automatically finds the
-source file for that frame and puts an arrow (_0__@samp{=>}_1__) at the
-left margin of the current line.  Emacs uses a separate buffer for
-source display, and splits the window to show both your _GDBN__ session
-and the source.
-
-Explicit _GDBN__ @code{list} or search commands still produce output as
-usual, but you probably will have no reason to use them.
-
-@quotation
-@emph{Warning:} If the directory where your program resides is not your
-current directory, it can be easy to confuse Emacs about the location of
-the source files, in which case the auxiliary display buffer will not
-appear to show your source.  _GDBN__ can find programs by searching your
-environment's @code{PATH} variable, so the _GDBN__ input and output
-session will proceed normally; but Emacs doesn't get enough information
-back from _GDBN__ to locate the source files in this situation.  To
-avoid this problem, either start _GDBN__ mode from the directory where
-your program resides, or specify a full path name when prompted for the
-@kbd{M-x gdb} argument.
-
-A similar confusion can result if you use the _GDBN__ @code{file} command to
-switch to debugging a program in some other location, from an existing
-_GDBN__ buffer in Emacs.
-@end quotation
-
-By default, @kbd{M-x gdb} calls the program called @file{gdb}.  If
-you need to call _GDBN__ by a different name (for example, if you keep
-several configurations around, with different names) you can set the
-Emacs variable @code{gdb-command-name}; for example,
-@example
-(setq gdb-command-name "mygdb")
-@end example
-@noindent
-(preceded by @kbd{ESC ESC}, or typed in the @code{*scratch*} buffer, or
-in your @file{.emacs} file) will make Emacs call the program named
-``@code{mygdb}'' instead.
-
-In the _GDBN__ I/O buffer, you can use these special Emacs commands in
-addition to the standard Shell mode commands:
-
-@table @kbd
-@item C-h m
-Describe the features of Emacs' _GDBN__ Mode.
-
-@item M-s
-Execute to another source line, like the _GDBN__ @code{step} command; also
-update the display window to show the current file and location.
-
-@item M-n
-Execute to next source line in this function, skipping all function
-calls, like the _GDBN__ @code{next} command.  Then update the display window
-to show the current file and location.
-
-@item M-i
-Execute one instruction, like the _GDBN__ @code{stepi} command; update
-display window accordingly.
-
-@item M-x gdb-nexti
-Execute to next instruction, using the _GDBN__ @code{nexti} command; update
-display window accordingly.
-
-@item C-c C-f
-Execute until exit from the selected stack frame, like the _GDBN__
-@code{finish} command.
-
-@item M-c
-Continue execution of the program, like the _GDBN__ @code{continue}
-command.  @emph{Warning:} In Emacs v19, this command is @kbd{C-c C-p}.
-
-@item M-u
-Go up the number of frames indicated by the numeric argument
-(@pxref{Arguments, , Numeric Arguments, emacs, The GNU Emacs Manual}),
-like the _GDBN__ @code{up} command.  @emph{Warning:} In Emacs v19, this
-command is @kbd{C-c C-u}.@refill
-
-@item M-d
-Go down the number of frames indicated by the numeric argument, like the
-_GDBN__ @code{down} command.  @emph{Warning:} In Emacs v19, this command
-is @kbd{C-c C-d}.
-
-@item C-x &
-Read the number where the cursor is positioned, and insert it at the end
-of the _GDBN__ I/O buffer.  For example, if you wish to disassemble code
-around an address that was displayed earlier, type @kbd{disassemble};
-then move the cursor to the address display, and pick up the
-argument for @code{disassemble} by typing @kbd{C-x &}.  
-
-You can customize this further on the fly by defining elements of the list
-@code{gdb-print-command}; once it is defined, you can format or
-otherwise process numbers picked up by @kbd{C-x &} before they are
-inserted.  A numeric argument to @kbd{C-x &} will both flag that you
-wish special formatting, and act as an index to pick an element of the
-list.  If the list element is a string, the number to be inserted is
-formatted using the Emacs function @code{format}; otherwise the number
-is passed as an argument to the corresponding list element.
-
-@end table
-
-In any source file, the Emacs command @kbd{C-x SPC} (@code{gdb-break})
-tells _GDBN__ to set a breakpoint on the source line point is on.
-
-If you accidentally delete the source-display buffer, an easy way to get
-it back is to type the command @code{f} in the _GDBN__ buffer, to
-request a frame display; when you run under Emacs, this will recreate
-the source buffer if necessary to show you the context of the current
-frame.
-
-The source files displayed in Emacs are in ordinary Emacs buffers
-which are visiting the source files in the usual way.  You can edit
-the files with these buffers if you wish; but keep in mind that _GDBN__
-communicates with Emacs in terms of line numbers.  If you add or
-delete lines from the text, the line numbers that _GDBN__ knows will cease
-to correspond properly to the code.
-
-@c The following dropped because Epoch is nonstandard.  Reactivate
-@c if/when v19 does something similar. ---pesch@cygnus.com 19dec1990
-@ignore
-@kindex emacs epoch environment  
-@kindex epoch
-@kindex inspect
-
-Version 18 of Emacs has a built-in window system called the @code{epoch}
-environment.  Users of this environment can use a new command,
-@code{inspect} which performs identically to @code{print} except that
-each value is printed in its own window.
-@end ignore
index c71a315..e69de29 100755 (executable)
@@ -1,300 +0,0 @@
-_dnl__                                                         -*- Texinfo -*-
-_dnl__ Copyright (c) 1988 1989 1990 1991 Free Software Foundation, Inc.
-_dnl__ This file is part of the source for the GDB manual.
-@c M4 FRAGMENT: $Id$
-@node _GDBN__ Files, Targets, Altering, Top
-@chapter _GDBN__'s Files
-
-@menu
-* Files::                      Commands to Specify Files
-* Symbol Errors::              Errors Reading Symbol Files
-@end menu
-
-@node Files, Symbol Errors, _GDBN__ Files, _GDBN__ Files
-@section Commands to Specify Files
-@cindex core dump file
-@cindex symbol table
-_GDBN__ needs to know the file name of the program to be debugged, both in
-order to read its symbol table and in order to start the program.  To
-debug a core dump of a previous run, _GDBN__ must be told the file name of
-the core dump.
-
-The usual way to specify the executable and core dump file names is with
-the command arguments given when you start _GDBN__, as discussed in
-@pxref{Invocation}.
-
-Occasionally it is necessary to change to a different file during a
-_GDBN__ session.  Or you may run _GDBN__ and forget to specify the files you
-want to use.  In these situations the _GDBN__ commands to specify new files
-are useful.
-
-@table @code
-@item file @var{filename}
-@cindex executable file
-@kindex file
-Use @var{filename} as the program to be debugged.  It is read for its
-symbols and for the contents of pure memory.  It is also the program
-executed when you use the @code{run} command.  If you do not specify a
-directory and the file is not found in _GDBN__'s working directory,
-
-_GDBN__ uses the environment variable @code{PATH} as a list of
-directories to search, just as the shell does when looking for a program
-to run.  You can change the value of this variable, for both _GDBN__ and
-your program, using the @code{path} command.
-
-@code{file} with no argument makes _GDBN__ discard any information it
-has on both executable file and the symbol table.
-
-@item exec-file @var{filename}
-@kindex exec-file
-Specify that the program to be run (but not the symbol table) is found
-in @var{filename}.  _GDBN__ will search the environment variable @code{PATH}
-if necessary to locate the program.  
-
-@item symbol-file @var{filename}
-@kindex symbol-file
-Read symbol table information from file @var{filename}.  @code{PATH} is
-searched when necessary.  Use the @code{file} command to get both symbol
-table and program to run from the same file.
-
-@code{symbol-file} with no argument clears out _GDBN__'s information on your
-program's symbol table.
-
-The @code{symbol-file} command causes _GDBN__ to forget the contents of its
-convenience variables, the value history, and all breakpoints and
-auto-display expressions.  This is because they may contain pointers to
-the internal data recording symbols and data types, which are part of
-the old symbol table data being discarded inside _GDBN__.
-
-@code{symbol-file} will not repeat if you press @key{RET} again after
-executing it once.
-
-On some kinds of object files, the @code{symbol-file} command does not
-actually read the symbol table in full right away.  Instead, it scans
-the symbol table quickly to find which source files and which symbols
-are present.  The details are read later, one source file at a time,
-when they are needed.
-
-The purpose of this two-stage reading strategy is to make _GDBN__ start up
-faster.  For the most part, it is invisible except for occasional pauses
-while the symbol table details for a particular source file are being
-read.  (The @code{set verbose} command can turn these pauses into
-messages if desired. @xref{Messages/Warnings}).
-
-When the symbol table is stored in COFF format, @code{symbol-file} does
-read the symbol table data in full right away.  We haven't implemented
-the two-stage strategy for COFF yet.
-
-When _GDBN__ is configured for a particular environment, it will
-understand debugging information in whatever format is the standard
-generated for that environment; you may use either a GNU compiler, or
-other compilers that adhere to the local conventions.  Best results are
-usually obtained from GNU compilers; for example, using @code{_GCC__}
-you can generate debugging information for optimized code.
-
-@item core-file @var{filename}
-@itemx core @var{filename}
-@kindex core
-@kindex core-file
-Specify the whereabouts of a core dump file to be used as the ``contents
-of memory''.  Traditionally, core files contain only some parts of the
-address space of the process that generated them; _GDBN__ can access the
-executable file itself for other parts.
-
-@code{core-file} with no argument specifies that no core file is
-to be used.
-
-Note that the core file is ignored when your program is actually running
-under _GDBN__.  So, if you have been running the program and you wish to
-debug a core file instead, you must kill the subprocess in which the
-program is running.  To do this, use the @code{kill} command
-(@pxref{Kill Process}).
-
-@item load @var{filename}
-@kindex load
-_if__(_GENERIC__)
-Depending on what remote debugging facilities are configured into
-_GDBN__, the @code{load} command may be available.  Where it exists, it
-is meant to make @var{filename} (an executable) available for debugging
-on the remote system---by downloading, or dynamic linking, for example.
-@code{load} also records @var{filename}'s symbol table in _GDBN__, like
-the @code{add-symbol-file} command.
-
-If @code{load} is not available on your _GDBN__, attempting to execute
-it gets the error message ``@code{You can't do that when your target is
-@dots{}}'' 
-_fi__(_GENERIC__)
-
-_if__(_VXWORKS__) 
-On VxWorks, @code{load} will dynamically link @var{filename} on the
-current target system as well as adding its symbols in _GDBN__.
-_fi__(_VXWORKS__)
-
-_if__(_I960__)
-@cindex download to Nindy-960
-With the Nindy interface to an Intel 960 board, @code{load} will
-download @var{filename} to the 960 as well as adding its symbols in
-_GDBN__. 
-_fi__(_I960__)
-
-@code{load} will not repeat if you press @key{RET} again after using it.
-
-@item add-symbol-file @var{filename} @var{address}
-@kindex add-symbol-file
-@cindex dynamic linking
-The @code{add-symbol-file} command reads additional symbol table information
-from the file @var{filename}.  You would use this command when that file
-has been dynamically loaded (by some other means) into the program that
-is running.  @var{address} should be the memory address at which the
-file has been loaded; _GDBN__ cannot figure this out for itself.
-
-The symbol table of the file @var{filename} is added to the symbol table
-originally read with the @code{symbol-file} command.  You can use the
-@code{add-symbol-file} command any number of times; the new symbol data thus
-read keeps adding to the old.  To discard all old symbol data instead,
-use the @code{symbol-file} command. 
-
-@code{add-symbol-file} will not repeat if you press @key{RET} after using it.
-
-@item info files
-@itemx info target
-@kindex info files
-@kindex info target
-@code{info files} and @code{info target} are synonymous; both print the
-current targets (@pxref{Targets}), including the names of the executable
-and core dump files currently in use by _GDBN__, and the files from
-which symbols were loaded.  The command @code{help targets} lists all
-possible targets rather than current ones.
-
-@end table
-
-All file-specifying commands allow both absolute and relative file names
-as arguments.  _GDBN__ always converts the file name to an absolute path
-name and remembers it that way.
-
-@kindex sharedlibrary
-@kindex share
-@cindex shared libraries
-
-_GDBN__ supports the SunOS shared library format.  Symbols from a shared
-library cannot be referenced before the shared library has been linked
-with the program.  (That is to say, until after you type @code{run} and 
-the function @code{main} has been entered; or when examining core
-files.)  Once the shared library has been linked in, you can use the
-following commands:
-
-@table @code
-@item sharedlibrary @var{regex}
-@itemx share @var{regex}
-Load shared object library symbols for files matching a UNIX regular
-expression.  
-
-@item share
-@itemx sharedlibrary
-Load symbols for all shared libraries.
-
-@item info share
-@itemx info sharedlibrary
-@kindex info sharedlibrary
-@kindex info share
-Print the names of the shared libraries which you have loaded with the
-@code{sharedlibrary} command.
-@end table
-
-@code{sharedlibrary} does not repeat automatically when you press
-@key{RET} after using it once.
-
-@node Symbol Errors,  , Files, _GDBN__ Files
-@section Errors Reading Symbol Files
-While a symbol file is being read, _GDBN__ will occasionally encounter
-problems, such as symbol types it does not recognize, or known bugs in
-compiler output.  By default, it prints one message about each such
-type of problem, no matter how many times the problem occurs.  You can
-ask it to print more messages, to see how many times the problems occur,
-or can shut the messages off entirely, with the @code{set 
-complaints} command (@xref{Messages/Warnings}).
-
-The messages currently printed, and their meanings, are:
-
-@table @code
-@item inner block not inside outer block in @var{symbol}
-
-The symbol information shows where symbol scopes begin and end
-(such as at the start of a function or a block of statements).  This
-error indicates that an inner scope block is not fully contained
-in its outer scope blocks.  
-
-_GDBN__ circumvents the problem by treating the inner block as if it had
-the same scope as the outer block.  In the error message, @var{symbol}
-may be shown as ``@code{(don't know)}'' if the outer block is not a
-function.
-
-@item block at @var{address} out of order
-
-The symbol information for symbol scope blocks should occur in 
-order of increasing addresses.  This error indicates that it does not
-do so.  
-
-_GDBN__ does not circumvent this problem, and will have trouble locating
-symbols in the source file whose symbols being read.  (You can often
-determine what source file is affected by specifying @code{set verbose
-on}.  @xref{Messages/Warnings}.)
-
-@item bad block start address patched
-
-The symbol information for a symbol scope block has a start address
-smaller than the address of the preceding source line.  This is known
-to occur in the SunOS 4.1.1 (and earlier) C compiler.  
-
-_GDBN__ circumvents the problem by treating the symbol scope block as
-starting on the previous source line.
-
-@c @item{encountered DBX-style class variable debugging information.
-@c You seem to have compiled your program with "g++ -g0" instead of "g++ -g".
-@c Therefore _GDBN__ will not know about your class variables}
-@c 
-@c This error indicates that the symbol information produced for a C++
-@c program includes zero-size fields, which indicated static fields in
-@c a previous release of the G++ compiler.  This message is probably
-@c obsolete.
-@c
-@item bad string table offset in symbol @var{n}
-
-@cindex foo
-Symbol number @var{n} contains a pointer into the string table which is
-larger than the size of the string table.  
-
-_GDBN__ circumvents the problem by considering the symbol to have the
-name @code{foo}, which may cause other problems if many symbols end up
-with this name.
-
-@item unknown symbol type @code{0x@var{nn}}
-
-The symbol information contains new data types that _GDBN__ does not yet
-know how to read.  @code{0x@var{nn}} is the symbol type of the misunderstood
-information, in hexadecimal.  
-
-_GDBN__ circumvents the error by ignoring this symbol information.  This
-will usually allow the program to be debugged, though certain symbols
-will not be accessible.  If you encounter such a problem and feel like
-debugging it, you can debug @code{_GDBP__} with itself, breakpoint on
-@code{complain}, then go up to the function @code{read_dbx_symtab} and
-examine @code{*bufp} to see the symbol.
-
-@item stub type has NULL name
-_GDBN__ could not find the full definition for a struct or class. 
-
-@ignore
-@c this is #if 0'd in dbxread.c as of (at least!) 17 may 1991
-@item const/volatile indicator missing, got '@var{X}'
-
-The symbol information for a C++ member function is missing some
-information that the compiler should have output for it.
-@end ignore
-
-@item C++ type mismatch between compiler and debugger
-
-The debugger could not parse a type specification output by the compiler
-for some C++ object.
-
-@end table
index 9925f83..e69de29 100755 (executable)
@@ -1,308 +0,0 @@
-_dnl__                                                         -*- Texinfo -*-
-_dnl__ Copyright (c) 1988 1989 1990 1991 Free Software Foundation, Inc.
-_dnl__ This file is part of the source for the GDB manual.
-@c M4 FRAGMENT: $Id$
-@node Copying, Index, Installing _GDBN__, Top
-@appendix Copying GDB
-@c this is an attempt to kluge around what may be a bug in texinfo;
-@c @xrefs to this node came out pointing several pages further down when
-@c the @node was immediately followed by @unnumbered.
-@c While we're at it, might as well give an Appendix heading that
-@c matches RMS' preferred nodename "Copying".
-
-@unnumbered GNU GENERAL PUBLIC LICENSE
-@center Version 1, February 1989
-
-@display
-Copyright @copyright{} 1989 Free Software Foundation, Inc.
-675 Mass Ave, Cambridge, MA 02139, USA
-
-Everyone is permitted to copy and distribute verbatim copies
-of this license document, but changing it is not allowed.
-@end display
-
-@unnumberedsec Preamble
-
-  The license agreements of most software companies try to keep users
-at the mercy of those companies.  By contrast, our General Public
-License is intended to guarantee your freedom to share and change free
-software---to make sure the software is free for all its users.  The
-General Public License applies to the Free Software Foundation's
-software and to any other program whose authors commit to using it.
-You can use it for your programs, too.
-
-  When we speak of free software, we are referring to freedom, not
-price.  Specifically, the General Public License is designed to make
-sure that you have the freedom to give away or sell copies of free
-software, that you receive source code or can get it if you want it,
-that you can change the software or use pieces of it in new free
-programs; and that you know you can do these things.
-
-  To protect your rights, we need to make restrictions that forbid
-anyone to deny you these rights or to ask you to surrender the rights.
-These restrictions translate to certain responsibilities for you if you
-distribute copies of the software, or if you modify it.
-
-  For example, if you distribute copies of a such a program, whether
-gratis or for a fee, you must give the recipients all the rights that
-you have.  You must make sure that they, too, receive or can get the
-source code.  And you must tell them their rights.
-
-  We protect your rights with two steps: (1) copyright the software, and
-(2) offer you this license which gives you legal permission to copy,
-distribute and/or modify the software.
-
-  Also, for each author's protection and ours, we want to make certain
-that everyone understands that there is no warranty for this free
-software.  If the software is modified by someone else and passed on, we
-want its recipients to know that what they have is not the original, so
-that any problems introduced by others will not reflect on the original
-authors' reputations.
-
-  The precise terms and conditions for copying, distribution and
-modification follow.
-
-@iftex
-@unnumberedsec TERMS AND CONDITIONS
-@end iftex
-@ifinfo
-@center TERMS AND CONDITIONS
-@end ifinfo
-
-@enumerate
-@item
-This License Agreement applies to any program or other work which
-contains a notice placed by the copyright holder saying it may be
-distributed under the terms of this General Public License.  The
-``Program'', below, refers to any such program or work, and a ``work based
-on the Program'' means either the Program or any work containing the
-Program or a portion of it, either verbatim or with modifications.  Each
-licensee is addressed as ``you''.
-
-@item
-You may copy and distribute verbatim copies of the Program's source
-code as you receive it, in any medium, provided that you conspicuously and
-appropriately publish on each copy an appropriate copyright notice and
-disclaimer of warranty; keep intact all the notices that refer to this
-General Public License and to the absence of any warranty; and give any
-other recipients of the Program a copy of this General Public License
-along with the Program.  You may charge a fee for the physical act of
-transferring a copy.
-
-@item
-You may modify your copy or copies of the Program or any portion of
-it, and copy and distribute such modifications under the terms of Paragraph
-1 above, provided that you also do the following:
-
-@itemize @bullet
-@item
-cause the modified files to carry prominent notices stating that
-you changed the files and the date of any change; and
-
-@item
-cause the whole of any work that you distribute or publish, that
-in whole or in part contains the Program or any part thereof, either
-with or without modifications, to be licensed at no charge to all
-third parties under the terms of this General Public License (except
-that you may choose to grant warranty protection to some or all
-third parties, at your option).
-
-@item
-If the modified program normally reads commands interactively when
-run, you must cause it, when started running for such interactive use
-in the simplest and most usual way, to print or display an
-announcement including an appropriate copyright notice and a notice
-that there is no warranty (or else, saying that you provide a
-warranty) and that users may redistribute the program under these
-conditions, and telling the user how to view a copy of this General
-Public License.
-
-@item
-You may charge a fee for the physical act of transferring a
-copy, and you may at your option offer warranty protection in
-exchange for a fee.
-@end itemize
-
-Mere aggregation of another independent work with the Program (or its
-derivative) on a volume of a storage or distribution medium does not bring
-the other work under the scope of these terms.
-
-@item
-You may copy and distribute the Program (or a portion or derivative of
-it, under Paragraph 2) in object code or executable form under the terms of
-Paragraphs 1 and 2 above provided that you also do one of the following:
-
-@itemize @bullet
-@item
-accompany it with the complete corresponding machine-readable
-source code, which must be distributed under the terms of
-Paragraphs 1 and 2 above; or,
-
-@item
-accompany it with a written offer, valid for at least three
-years, to give any third party free (except for a nominal charge
-for the cost of distribution) a complete machine-readable copy of the
-corresponding source code, to be distributed under the terms of
-Paragraphs 1 and 2 above; or,
-
-@item
-accompany it with the information you received as to where the
-corresponding source code may be obtained.  (This alternative is
-allowed only for noncommercial distribution and only if you
-received the program in object code or executable form alone.)
-@end itemize
-
-Source code for a work means the preferred form of the work for making
-modifications to it.  For an executable file, complete source code means
-all the source code for all modules it contains; but, as a special
-exception, it need not include source code for modules which are standard
-libraries that accompany the operating system on which the executable
-file runs, or for standard header files or definitions files that
-accompany that operating system.
-
-@item
-You may not copy, modify, sublicense, distribute or transfer the
-Program except as expressly provided under this General Public License.
-Any attempt otherwise to copy, modify, sublicense, distribute or transfer
-the Program is void, and will automatically terminate your rights to use
-the Program under this License.  However, parties who have received
-copies, or rights to use copies, from you under this General Public
-License will not have their licenses terminated so long as such parties
-remain in full compliance.
-
-@item
-By copying, distributing or modifying the Program (or any work based
-on the Program) you indicate your acceptance of this license to do so,
-and all its terms and conditions.
-
-@item
-Each time you redistribute the Program (or any work based on the
-Program), the recipient automatically receives a license from the original
-licensor to copy, distribute or modify the Program subject to these
-terms and conditions.  You may not impose any further restrictions on the
-recipients' exercise of the rights granted herein.
-
-@item
-The Free Software Foundation may publish revised and/or new versions
-of the General Public License from time to time.  Such new versions will
-be similar in spirit to the present version, but may differ in detail to
-address new problems or concerns.
-
-Each version is given a distinguishing version number.  If the Program
-specifies a version number of the license which applies to it and ``any
-later version'', you have the option of following the terms and conditions
-either of that version or of any later version published by the Free
-Software Foundation.  If the Program does not specify a version number of
-the license, you may choose any version ever published by the Free Software
-Foundation.
-
-@item
-If you wish to incorporate parts of the Program into other free
-programs whose distribution conditions are different, write to the author
-to ask for permission.  For software which is copyrighted by the Free
-Software Foundation, write to the Free Software Foundation; we sometimes
-make exceptions for this.  Our decision will be guided by the two goals
-of preserving the free status of all derivatives of our free software and
-of promoting the sharing and reuse of software generally.
-
-@iftex
-@heading NO WARRANTY
-@end iftex
-@ifinfo
-@center NO WARRANTY
-@end ifinfo
-
-@item
-BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
-FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  EXCEPT WHEN
-OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
-PROVIDE THE PROGRAM ``AS IS'' WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
-OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE RISK AS
-TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE
-PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
-REPAIR OR CORRECTION.
-
-@item
-IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL
-ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
-REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
-INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES
-ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT
-LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES
-SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE
-WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN
-ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
-@end enumerate
-
-@iftex
-@heading END OF TERMS AND CONDITIONS
-@end iftex
-@ifinfo
-@center END OF TERMS AND CONDITIONS
-@end ifinfo
-
-@page
-@unnumberedsec Applying These Terms to Your New Programs
-
-  If you develop a new program, and you want it to be of the greatest
-possible use to humanity, the best way to achieve this is to make it
-free software which everyone can redistribute and change under these
-terms.
-
-  To do so, attach the following notices to the program.  It is safest to
-attach them to the start of each source file to most effectively convey
-the exclusion of warranty; and each file should have at least the
-``copyright'' line and a pointer to where the full notice is found.
-
-@smallexample
-@var{one line to give the program's name and a brief idea of what it does.}
-Copyright (C) 19@var{yy}  @var{name of author}
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 1, or (at your option)
-any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-@end smallexample
-
-Also add information on how to contact you by electronic and paper mail.
-
-If the program is interactive, make it output a short notice like this
-when it starts in an interactive mode:
-
-@smallexample
-Gnomovision version 69, Copyright (C) 19@var{yy} @var{name of author}
-Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
-This is free software, and you are welcome to redistribute it
-under certain conditions; type `show c' for details.
-@end smallexample
-
-The hypothetical commands `show w' and `show c' should show the
-appropriate parts of the General Public License.  Of course, the
-commands you use may be called something other than `show w' and `show
-c'; they could even be mouse-clicks or menu items---whatever suits your
-program.
-
-You should also get your employer (if you work as a programmer) or your
-school, if any, to sign a ``copyright disclaimer'' for the program, if
-necessary.  Here is a sample; alter the names:
-
-@smallexample
-Yoyodyne, Inc., hereby disclaims all copyright interest in the
-program `Gnomovision' (a program to direct compilers to make passes
-at assemblers) written by James Hacker.
-
-@var{signature of Ty Coon}, 1 April 1989
-Ty Coon, President of Vice
-@end smallexample
-
-That's all there is to it!
index 651c8d0..e69de29 100755 (executable)
@@ -1,57 +0,0 @@
-_dnl__                                                         -*- Texinfo -*-
-_dnl__ Copyright (c) 1990 1991 Free Software Foundation, Inc.
-_dnl__ This file is part of the source for the GDB manual.
-@c M4 FRAGMENT: $Id$
-@node Installing _GDBN__, Copying, Renamed Commands, Top
-@appendix Installing _GDBN__
-@cindex configuring _GDBN__
-@cindex installation
-
-The script @code{config.gdb} automates the process of preparing _GDBN__
-for installation; you can then use @code{make} to actually build it.
-The best way to build _GDBN__ is in a subdirectory that records the
-configuration options used; this gives you a clean way of building
-_GDBN__ binaries with several different configuration options.
-@code{config.gdb} doesn't depend on this---it's just a good habit.  For
-example, assuming the _GDBN__ source is in a directory called
-``@code{gdb-4.0}'': 
-
-@example
-cd gdb-4.0
-mkdir =sun3os4
-cd =sun3os4
-../config.gdb sun3os4
-make
-@end example
-
-@noindent
-will install _GDBN__ on a Sun 3 running SunOS 4.  
-
-@table @code
-@kindex config.gdb
-@item config.gdb @var{machine}
-@itemx config.gdb -srcdir=@var{dir} @var{machine}
-This is the most usual way of configuring _GDBN__; to debug programs running
-on the same machine as _GDBN__ itself.  If you wish to build the _GDBN__ binaries
-in a completely different directory from the sources, specify a path to
-the source directory using the @samp{-srcdir} option.
-
-@item config.gdb -host
-@cindex host environments
-Display a list of supported host environments for _GDBN__.
-
-@item config.gdb @var{host} @var{target}
-@itemx config.gdb -srcdir=@var{dir} @var{host} @var{target}
-@cindex cross-debugging
-_GDBN__ can also be used as a cross-debugger, running on a machine of one
-type while debugging a program running on a machine of another type.
-You configure it this way by specifying first the @var{host}, then the
-@var{target} environment on the @code{config.gdb} argument list; the
-@var{host} is where _GDBN__ runs, and the @var{target} is where your program
-runs. @xref{Remote}.  Again, you can use @samp{-srcdir} to specify a
-path to the _GDBN__ source.
-
-@item config.gdb -target
-@cindex target environments
-Display a list of supported target environments for _GDBN__.
-@end table
index 1ff32de..e69de29 100755 (executable)
@@ -1,207 +0,0 @@
-_dnl__                                                         -*- Texinfo -*-
-_dnl__ Copyright (c) 1988 1989 1990 1991 Free Software Foundation, Inc.
-_dnl__ This file is part of the source for the GDB manual.
-@c M4 FRAGMENT: $Id$
-@node Invocation, Commands, Sample Session, Top
-@chapter Getting In and Out of _GDBN__
-
-@menu
-* Starting _GDBN__::           Starting _GDBN__
-* Leaving _GDBN__::                    Leaving _GDBN__
-* Shell Commands::             Shell Commands
-@end menu
-
-@node Starting _GDBN__, Leaving _GDBN__, Invocation, Invocation
-@section Starting _GDBN__
-
-_GDBN__ is invoked with the shell command @code{_GDBP__}.  Once started,
-it reads commands from the terminal until you tell it to exit.
-
-You can run @code{_GDBP__} with no arguments or options; but the most
-usual way to start _GDBN__ is with one argument or two, specifying an
-executable program as the argument:
-@example
-_GDBP__ program
-@end example
-@noindent
-You can also start with both an executable program and a core file specified:
-@example
-_GDBP__ program core
-@end example
-
-@noindent
-You can further control how _GDBN__ starts up by using command-line
-options.  _GDBN__ itself can remind you of the options available:
-@example
-_GDBP__ -help
-@end example
-@noindent
-will display all available options and briefly describe their use
-(@samp{_GDBP__ -h} is a shorter equivalent).
-
-All options and command line arguments you give are processed
-in sequential order.  The order makes a difference when the
-@samp{-x} option is used.  
-
-@menu
-* File Options::               Choosing Files
-* Mode Options::               Choosing Modes
-_if__(!_GENERIC__)
-_include__(gdb.inv.m-m4)_dnl__
-_fi__(!_GENERIC__)
-@end menu
-
-@node File Options, Mode Options, Starting _GDBN__, Starting _GDBN__
-@subsection Choosing Files
-
-As shown above, any arguments other than options specify an executable
-file and core file; that is, the first argument encountered with no
-associated option flag is equivalent to a @samp{-se} option, and the
-second, if any, is equivalent to a @samp{-c} option.  Many options have
-both long and short forms; both are shown here.  The long forms are also
-recognized if you truncate them, so long as enough of the option is
-present to be unambiguous.  (If you prefer, you can flag option
-arguments with @samp{+} rather than @samp{-}, though we illustrate the
-more usual convention.)
-
-@table @code
-@item -symbols=@var{file}
-@itemx -s @var{file}
-Read symbol table from file @var{file}.
-
-@item -exec=@var{file}
-@itemx -e @var{file}
-Use file @var{file} as the executable file to execute when
-appropriate, and for examining pure data in conjunction with a core
-dump.
-
-@item -se @var{file}
-Read symbol table from file @var{file} and use it as the executable
-file.
-
-@item -core=@var{file}
-@itemx -c @var{file}
-Use file @var{file} as a core dump to examine.
-
-@item -command=@var{file}
-@itemx -x @var{file}
-Execute _GDBN__ commands from file @var{file}.  @xref{Command Files}.
-
-@item -directory=@var{directory}
-@itemx -d @var{directory}
-Add @var{directory} to the path to search for source files.
-@end table
-
-_if__(!_GENERIC__)
-@node Mode Options, i960-Nindy Remote, File Options, Starting _GDBN__
-_fi__(!_GENERIC__)
-_if__(_GENERIC__)
-@node Mode Options,  , File Options, Starting _GDBN__
-_fi__(_GENERIC__)
-@subsection Choosing Modes
-
-@table @code
-@item -nx
-@itemx -n
-Do not execute commands from any @file{_GDBINIT__} initialization files.
-Normally, the commands in these files are executed after all the
-command options and arguments have been processed.  @xref{Command
-Files}.
-
-@item -quiet
-@itemx -q
-``Quiet''.  Do not print the introductory and copyright messages.  These
-messages are also suppressed in batch mode, or if an executable file name is
-specified on the _GDBN__ command line.
-
-@item -batch
-Run in batch mode.  Exit with status @code{0} after processing all the command
-files specified with @samp{-x} (and @file{_GDBINIT__}, if not inhibited).
-Exit with nonzero status if an error occurs in executing the _GDBN__
-commands in the command files.  
-
-Batch mode may be useful for running _GDBN__ as a filter, for example to
-download and run a program on another computer; in order to make this
-more useful, the message 
-@example
-Program exited normally.
-@end example
-@noindent
-(which is ordinarily issued whenever a program running under _GDBN__ control
-terminates) is not issued when running in batch mode.
-
-@item -cd @var{directory}
-Run _GDBN__ using @var{directory} as its working directory,
-instead of the current directory.
-
-@item -fullname
-@itemx -f
-This option is used when Emacs runs _GDBN__ as a subprocess.  It tells _GDBN__
-to output the full file name and line number in a standard,
-recognizable fashion each time a stack frame is displayed (which
-includes each time the program stops).  This recognizable format looks
-like two @samp{\032} characters, followed by the file name, line number
-and character position separated by colons, and a newline.  The
-Emacs-to-_GDBN__ interface program uses the two @samp{\032} characters as
-a signal to display the source code for the frame.
-
-@item -b @var{bps}
-Set the line speed (baud rate or bits per second) of any serial
-interface used by _GDBN__ for remote debugging.
-
-@item -tty @var{device}
-Run using @var{device} for your program's standard input and output.
-@c FIXME: kingdon thinks there's more to -tty.  Investigate.
-@end table
-
-_if__(!_GENERIC__)
-_include__(gdb.inv.s-m4)
-_fi__(!_GENERIC__)
-
-@node Leaving _GDBN__, Shell Commands, Starting _GDBN__, Invocation
-@section Leaving _GDBN__
-@cindex exiting _GDBN__
-@table @code
-@item quit
-@kindex quit
-@kindex q
-To exit _GDBN__, use the @code{quit} command (abbreviated @code{q}), or type
-an end-of-file character (usually @kbd{C-d}).  
-@end table
-
-@cindex interrupt
-An interrupt (often @kbd{C-c}) will not exit from _GDBN__, but rather
-will terminate the action of any _GDBN__ command that is in progress and
-return to _GDBN__ command level.  It is safe to type the interrupt
-character at any time because _GDBN__ does not allow it to take effect
-until a time when it is safe.
-
-If you've been using _GDBN__ to control an attached process or device,
-you can release it with the @code{detach} command; @pxref{Attach}.
-
-@node Shell Commands,  , Leaving _GDBN__, Invocation
-@section Shell Commands
-If you just need to execute occasional shell commands during your
-debugging session, there's no need to leave or suspend _GDBN__; you can
-just use the @code{shell} command.
-
-@table @code
-@item shell @var{command string}
-@kindex shell
-@cindex shell escape
-Directs _GDBN__ to invoke an inferior shell to execute @var{command
-string}.  If it exists, the environment variable @code{SHELL} is used
-for the name of the shell to run.  Otherwise _GDBN__ uses
-@code{/bin/sh}.
-@end table
-
-The utility @code{make} is often needed in development environments.
-You don't have to use the @code{shell} command for this purpose in _GDBN__:
-
-@table @code
-@item make @var{make-args}
-@kindex make
-@cindex calling make
-Causes _GDBN__ to execute an inferior @code{make} program with the specified
-arguments.  This is equivalent to @samp{shell make @var{make-args}}.
-@end table
index 7248efa..e69de29 100755 (executable)
@@ -1,7 +0,0 @@
-_dnl__                                                         -*- Texinfo -*-
-_dnl__ Copyright (c) 1991 Free Software Foundation, Inc.
-_dnl__ This file is part of the source for the GDB manual.
-@c M4 FRAGMENT: $Id$
-@iftex
-@include rdl-apps.texinfo
-@end iftex
index 7731a41..e69de29 100755 (executable)
@@ -1,112 +0,0 @@
-_dnl__                                                         -*- Texinfo -*-
-_dnl__ Copyright (c) 1991 Free Software Foundation, Inc.
-_dnl__ This file is part of the source for the GDB manual.
-@c M4 FRAGMENT: $Id$
-@node Renamed Commands, Installing _GDBN__, _GDBN__ Bugs, Top
-@appendix Renamed Commands
-
-The following commands were renamed in _GDBN__ 4.0, in order to make the
-command set as a whole more consistent and easier to use and remember:
-
-@kindex add-syms                   
-@kindex delete environment         
-@kindex info copying               
-@kindex info convenience           
-@kindex info directories           
-@kindex info editing               
-@kindex info history               
-@kindex info targets               
-@kindex info values                
-@kindex info version               
-@kindex info warranty              
-@kindex set addressprint      
-@kindex set arrayprint        
-@kindex set prettyprint       
-@kindex set screen-height     
-@kindex set screen-width      
-@kindex set unionprint        
-@kindex set vtblprint         
-@kindex set demangle          
-@kindex set asm-demangle      
-@kindex set sevenbit-strings  
-@kindex set array-max         
-@kindex set caution           
-@kindex set history write     
-@kindex show addressprint      
-@kindex show arrayprint        
-@kindex show prettyprint       
-@kindex show screen-height     
-@kindex show screen-width      
-@kindex show unionprint        
-@kindex show vtblprint         
-@kindex show demangle          
-@kindex show asm-demangle      
-@kindex show sevenbit-strings  
-@kindex show array-max         
-@kindex show caution           
-@kindex show history write     
-@kindex unset                      
-
-@ifinfo
-OLD COMMAND                NEW COMMAND
----------------            ----------------------------------
-add-syms                   add-symbol-file
-delete environment         unset environment
-info convenience           show convenience
-info copying               show copying
-info directories           show directories     
-info editing               show commands
-info history               show values
-info targets               help target
-info values                show values
-info version               show version
-info warranty              show warranty
-set/show addressprint      set/show print address
-set/show array-max         set/show print elements
-set/show arrayprint        set/show print array
-set/show asm-demangle      set/show print asm-demangle
-set/show caution           set/show confirm
-set/show demangle          set/show print demangle
-set/show history write     set/show history save
-set/show prettyprint       set/show print pretty
-set/show screen-height     set/show height
-set/show screen-width      set/show width
-set/show sevenbit-strings  set/show print sevenbit-strings
-set/show unionprint        set/show print union
-set/show vtblprint         set/show print vtbl
-
-unset                      [ No longer an alias for delete ]
-@end ifinfo
-
-@tex
-\vskip \parskip\vskip \baselineskip
-\halign{\tt #\hfil &\qquad#&\tt #\hfil\cr
-{\bf Old Command}         &&{\bf New Command}\cr
-add-syms                  &&add-symbol-file\cr
-delete environment        &&unset environment\cr
-info convenience          &&show convenience\cr
-info copying              &&show copying\cr
-info directories          &&show directories     \cr
-info editing              &&show commands\cr
-info history              &&show values\cr
-info targets              &&help target\cr
-info values               &&show values\cr
-info version              &&show version\cr
-info warranty             &&show warranty\cr
-set{\rm / }show addressprint     &&set{\rm / }show print address\cr
-set{\rm / }show array-max        &&set{\rm / }show print elements\cr
-set{\rm / }show arrayprint       &&set{\rm / }show print array\cr
-set{\rm / }show asm-demangle     &&set{\rm / }show print asm-demangle\cr
-set{\rm / }show caution          &&set{\rm / }show confirm\cr
-set{\rm / }show demangle         &&set{\rm / }show print demangle\cr
-set{\rm / }show history write    &&set{\rm / }show history save\cr
-set{\rm / }show prettyprint      &&set{\rm / }show print pretty\cr
-set{\rm / }show screen-height    &&set{\rm / }show height\cr
-set{\rm / }show screen-width     &&set{\rm / }show width\cr
-set{\rm / }show sevenbit-strings &&set{\rm / }show print sevenbit-strings\cr
-set{\rm / }show unionprint       &&set{\rm / }show print union\cr
-set{\rm / }show vtblprint        &&set{\rm / }show print vtbl\cr
-\cr
-unset                     &&\rm(No longer an alias for delete)\cr
-}
-@end tex
index 09df60b..e69de29 100755 (executable)
@@ -1,390 +0,0 @@
-_dnl__                                                         -*- Texinfo -*-
-_dnl__ Copyright (c) 1988 1989 1990 1991 Free Software Foundation, Inc.
-_dnl__ This file is part of the source for the GDB manual.
-@c M4 FRAGMENT: $Id$
-@node Running, Stopping, Commands, Top
-@chapter Running Programs Under _GDBN__
-
-@menu
-* Compilation::                        Compiling for Debugging
-* Starting::                   Starting your Program
-* Arguments::                  Your Program's Arguments
-* Environment::                        Your Program's Environment
-* Working Directory::          Your Program's Working Directory
-* Input/Output::               Your Program's Input and Output
-* Attach::                     Debugging an Already-Running Process
-* Kill Process::               Killing the Child Process
-@end menu
-
-@node Compilation, Starting, Running, Running
-@section Compiling for Debugging
-
-In order to debug a program effectively, you need to generate
-debugging information when you compile it.  This debugging information
-is stored in the object file; it describes the data type of each
-variable or function and the correspondence between source line numbers
-and addresses in the executable code.
-
-To request debugging information, specify the @samp{-g} option when you run
-the compiler.
-
-Many C compilers are unable to handle the @samp{-g} and @samp{-O}
-options together.  Using those compilers, you cannot generate optimized
-executables containing debugging information.
-
-The GNU C compiler supports @samp{-g} with or without @samp{-O}, making it
-possible to debug optimized code.  We recommend that you @emph{always} use
-@samp{-g} whenever you compile a program.  You may think the program is
-correct, but there's no sense in pushing your luck.
-
-Some things do not work as well with @samp{-g -O} as with just
-@samp{-g}, particularly on machines with instruction scheduling.  If in
-doubt, recompile with @samp{-g} alone, and if this fixes the problem,
-please report it as a bug (including a test case!).
-
-Older versions of the GNU C compiler permitted a variant option
-@samp{-gg} for debugging information.  _GDBN__ no longer supports this
-format; if your GNU C compiler has this option, do not use it.
-
-@ignore
-@comment As far as I know, there are no cases in which _GDBN__ will
-@comment produce strange output in this case.  (but no promises).
-If your program includes archives made with the @code{ar} program, and
-if the object files used as input to @code{ar} were compiled without the
-@samp{-g} option and have names longer than 15 characters, _GDBN__ will get
-confused reading the program's symbol table.  No error message will be
-given, but _GDBN__ may behave strangely.  The reason for this problem is a
-deficiency in the Unix archive file format, which cannot represent file
-names longer than 15 characters.
-
-To avoid this problem, compile the archive members with the @samp{-g}
-option or use shorter file names.  Alternatively, use a version of GNU
-@code{ar} dated more recently than August 1989.
-@end ignore
-
-
-@node Starting, Arguments, Compilation, Running
-@section Starting your Program
-@cindex starting
-@cindex running
-@table @code
-@item run
-@itemx r
-@kindex run
-Use the @code{run} command to start your program under _GDBN__.
-_if__(_VXWORKS__)
-Except on VxWorks, you
-_fi__(_VXWORKS__)
-_if__(!_VXWORKS__)
-You
-_fi__(!_VXWORKS__)
-must first specify the program name with an argument to _GDBN__
-(@pxref{Invocation}), or using the @code{file} or @code{exec-file}
-command (@pxref{Files}).@refill
-@end table
-
-On targets that support processes, @code{run} creates an inferior
-process and makes that process run your program.  On other targets,
-@code{run} jumps to the start of the program.
-
-The execution of a program is affected by certain information it
-receives from its superior.  _GDBN__ provides ways to specify this
-information, which you must do @i{before} starting the program.  (You
-can change it after starting the program, but such changes will only affect
-the program the next time you start it.)  This information may be
-divided into four categories:
-
-@table @asis
-@item The @i{arguments.}
-You specify the arguments to give your program as the arguments of the
-@code{run} command.  If a shell is available on your target, the shell
-is used to pass the arguments, so that you may use normal conventions
-(such as wildcard expansion or variable substitution) in
-describing the arguments.  In Unix systems, you can control which shell
-is used with the @code{SHELL} environment variable. @xref{Arguments}.@refill
-
-@item The @i{environment.}
-Your program normally inherits its environment from _GDBN__, but you can
-use the _GDBN__ commands @code{set environment} and @code{unset
-environment} to change parts of the environment that will be given to
-the program.  @xref{Environment}.@refill
-
-@item The @i{working directory.}
-Your program inherits its working directory from _GDBN__.  You can set
-_GDBN__'s working directory with the @code{cd} command in _GDBN__.
-@xref{Working Directory}.
-
-@item The @i{standard input and output.}
-Your program normally uses the same device for standard input and
-standard output as _GDBN__ is using.  You can redirect input and output
-in the @code{run} command line, or you can use the @code{tty} command to
-set a different device for your program.
-@xref{Input/Output}.
-@end table
-
-When you issue the @code{run} command, your program begins to execute
-immediately.  @xref{Stopping}, for discussion of how to arrange for your
-program to stop.  Once your program has been started by the @code{run}
-command (and then stopped), you may evaluate expressions that involve
-calls to functions in the inferior, using the @code{print} or
-@code{call} commands.  @xref{Data}.
-
-If the modification time of your symbol file has changed since the last
-time _GDBN__ read its symbols, _GDBN__ will discard its symbol table and re-read
-it.  In this process, it tries to retain your current breakpoints.
-
-@node Arguments, Environment, Starting, Running
-@section Your Program's Arguments
-
-@cindex arguments (to your program)
-The arguments to your program can be specified by the arguments of the
-@code{run} command.  They are passed to a shell, which expands wildcard
-characters and performs redirection of I/O, and thence to the program.
-_GDBN__ uses the shell indicated by your environment variable
-@code{SHELL} if it exists; otherwise, _GDBN__ uses @code{/bin/sh}.
-
-@code{run} with no arguments uses the same arguments used by the previous
-@code{run}, or those set by the @code{set args} command.
-
-@kindex set args
-@table @code
-@item set args
-Specify the arguments to be used the next time your program is run.  If
-@code{set args} has no arguments, @code{run} will execute your program
-with no arguments.  Once you have run your program with arguments, this
-is the only way to run it again without arguments.
-
-@item show args
-@kindex show args
-Show the arguments to give your program when it is started.
-@end table
-
-@node Environment, Working Directory, Arguments, Running
-@section Your Program's Environment
-
-@cindex environment (of your program)
-The @dfn{environment} consists of a set of environment variables and
-their values.  Environment variables conventionally record such things as
-your user name, your home directory, your terminal type, and your search
-path for programs to run.  Usually you set up environment variables with
-the shell and they are inherited by all the other programs you run.  When
-debugging, it can be useful to try running the program with a modified
-environment without having to start _GDBN__ over again.
-
-@table @code
-@item path @var{directory}
-@kindex path
-Add @var{directory} to the front of the @code{PATH} environment variable
-(the search path for executables), for both _GDBN__ and your program.
-You may specify several directory names, separated by @samp{:} or
-whitespace.  If @var{directory} is already in the path, it is moved to
-the front, so it will be searched sooner.  You can use the string
-@samp{$cwd} to refer to whatever is the current working directory at the
-time _GDBN__ searches the path.  @footnote{If you use @samp{.} instead,
-it refers to the directory where you executed the @code{path} command.
-_GDBN__ fills in the current path where needed in the @var{directory}
-argument, before adding it to the search path.}
-@c 'path' is explicitly nonrepeatable, but RMS points out it's silly to
-@c document that, since repeating it would be a no-op.
-
-@item show paths
-@kindex show paths
-Display the list of search paths for executables (the @code{PATH}
-environment variable).
-
-@item show environment @var{varname}
-@kindex show environment
-Print the value of environment variable @var{varname} to be given to
-your program when it starts.
-
-@item show environment
-Print the names and values of all environment variables to be given to
-your program.
-
-@item set environment @var{varname} @var{value}
-@itemx set environment @var{varname} = @var{value}
-@kindex set environment
-Sets environment variable @var{varname} to @var{value}.  The value
-changes for your program only, not for _GDBN__ itself.  @var{value} may
-be any string; the values of environment variables are just strings, and
-any interpretation is supplied by your program itself.  The @var{value}
-parameter is optional; if it is eliminated, the variable is set to a
-null value.
-@c "any string" here doesn't include leading, trailing
-@c blanks. Gnu asks: does anyone care?
-
-For example, this command:
-
-@example
-set env USER = foo
-@end example
-
-@noindent
-tells a Unix program, when subsequently run, that its user is named
-@samp{foo}.  (The spaces around @samp{=} are used for clarity here; they
-are not actually required.)
-
-@item unset environment @var{varname}
-@kindex unset environment
-Remove variable @var{varname} from the environment to be passed to your
-program.  This is different from @samp{set env @var{varname} =};
-@code{unset environment} removes the variable from the environment,
-rather than assigning it an empty value.  
-@end table
-
-@node Working Directory, Input/Output, Environment, Running
-@section Your Program's Working Directory
-
-@cindex working directory (of your program)
-Each time you start your program with @code{run}, it inherits its
-working directory from the current working directory of _GDBN__.  _GDBN__'s
-working directory is initially whatever it inherited from its parent
-process (typically the shell), but you can specify a new working
-directory in _GDBN__ with the @code{cd} command.
-
-The _GDBN__ working directory also serves as a default for the commands
-that specify files for _GDBN__ to operate on.  @xref{Files}.
-
-@table @code
-@item cd @var{directory}
-@kindex cd
-Set _GDBN__'s working directory to @var{directory}.
-
-@item pwd
-@kindex pwd
-Print _GDBN__'s working directory.
-@end table
-
-@node Input/Output, Attach, Working Directory, Running
-@section Your Program's Input and Output
-
-@cindex redirection
-@cindex i/o
-@cindex terminal
-@cindex controlling terminal
-By default, the program you run under _GDBN__ does input and output to
-the same terminal that _GDBN__ uses.  _GDBN__ switches the terminal to
-its own terminal modes to interact with you, but it records the terminal
-modes your program was using and switches back to them when you continue
-running your program.
-
-@table @code
-@item info terminal
-@kindex info terminal
-Displays _GDBN__'s recorded information about the terminal modes your
-program is using.
-@end table
-
-You can redirect the program's input and/or output using shell
-redirection with the @code{run} command.  For example,
-
-_0__@example
-run > outfile
-_1__@end example
-
-@noindent
-starts the program, diverting its output to the file @file{outfile}.
-
-@kindex tty
-Another way to specify where the program should do input and output is
-with the @code{tty} command.  This command accepts a file name as
-argument, and causes this file to be the default for future @code{run}
-commands.  It also resets the controlling terminal for the child
-process, for future @code{run} commands.  For example,
-
-@example
-tty /dev/ttyb
-@end example
-
-@noindent
-directs that processes started with subsequent @code{run} commands
-default to do input and output on the terminal @file{/dev/ttyb} and have
-that as their controlling terminal.
-
-An explicit redirection in @code{run} overrides the @code{tty} command's
-effect on the input/output device, but not its effect on the controlling
-terminal.
-
-When you use the @code{tty} command or redirect input in the @code{run}
-command, only the input @emph{for your program} is affected.  The input
-for _GDBN__ still comes from your terminal.
-
-@node Attach, Kill Process, Input/Output, Running
-@section Debugging an Already-Running Process
-@kindex attach
-@cindex attach
-
-@table @code
-@item attach @var{process-id}
-This command
-attaches to a running process---one that was started outside _GDBN__.
-(@code{info files} will show your active targets.)  The command takes as
-argument a process ID.  The usual way to find out the process-id of
-a Unix process is with the @code{ps} utility, or with the @samp{jobs -l}
-shell command.   
-
-@code{attach} will not repeat if you press @key{RET} a second time after
-executing the command.
-@end table
-
-To use @code{attach}, you must be debugging in an environment which
-supports processes.  You must also have permission to send the process a
-signal, and it must have the same effective user ID as the _GDBN__
-process.
-
-When using @code{attach}, you should first use the @code{file} command
-to specify the program running in the process and load its symbol table.
-@xref{Files}.
-
-The first thing _GDBN__ does after arranging to debug the specified
-process is to stop it.  You can examine and modify an attached process
-with all the _GDBN__ commands that ordinarily available when you start
-processes with @code{run}.  You can insert breakpoints; you can step and
-continue; you can modify storage.  If you would rather the process
-continue running, you may use the @code{continue} command after
-attaching _GDBN__ to the process.
-
-@table @code
-@item detach
-@kindex detach
-When you have finished debugging the attached process, you can use the
-@code{detach} command to release it from _GDBN__'s control.  Detaching
-the process continues its execution.  After the @code{detach} command,
-that process and _GDBN__ become completely independent once more, and you
-are ready to @code{attach} another process or start one with @code{run}.
-@code{detach} will not repeat if you press @key{RET} again after
-executing the command.
-@end table
-
-If you exit _GDBN__ or use the @code{run} command while you have an attached
-process, you kill that process.  By default, you will be asked for
-confirmation if you try to do either of these things; you can control
-whether or not you need to confirm by using the @code{set confirm} command
-(@pxref{Messages/Warnings}).
-
-@node Kill Process,  , Attach, Running
-@c @group
-@section Killing the Child Process
-
-@table @code
-@item kill
-@kindex kill
-Kill the child process in which your program is running under _GDBN__.
-@end table
-
-This command is useful if you wish to debug a core dump instead of a
-running process.  _GDBN__ ignores any core dump file while your program
-is running.
-@c @end group
-
-On some operating systems, you can't execute your program in another
-process while breakpoints are active inside _GDBN__.  You can use the
-@code{kill} command in this situation to permit running the program
-outside the debugger.
-
-The @code{kill} command is also useful if you wish to recompile and
-relink the program, since on many systems it is impossible to modify an
-executable file which is running in a process.  In this case, when you
-next type @code{run}, _GDBN__ will notice that the file has changed, and
-will re-read the symbol table (while trying to preserve your current
-breakpoint settings).
index ae258ad..e69de29 100755 (executable)
@@ -1,263 +0,0 @@
-_dnl__                                                         -*- Texinfo -*-
-_dnl__ Copyright (c) 1991 Free Software Foundation, Inc.
-_dnl__ This file is part of the source for the GDB manual.
-@c M4 FRAGMENT: $Id$
-@node Sample Session, Invocation, New Features, Top
-@chapter A Sample _GDBN__ Session
-
-You can use this manual at your leisure to read all about _GDBN__.
-However, a handful of commands are enough to get started using the
-debugger.  This chapter illustrates these commands.
-
-@iftex
-In this sample session, we emphasize user input like this: @i{input},
-to make it easier to pick out from the surrounding output.
-@end iftex
-
-@c FIXME: this example may not be appropriate for some configs, where
-@c FIXME...primary interest is in remote use.
-_0__
-One of the preliminary versions of GNU @code{m4} (a generic macro
-processor) exhibits the following bug: sometimes, when we change its
-quote strings from the default, the commands used to capture one macro's
-definition in another stop working.  In the following short @code{m4}
-session, we define a macro @code{foo} which expands to @code{0000}; we
-then use the @code{m4} builtin @code{defn} to define @code{bar} as the
-same thing.  However, when we change the open quote string to
-@code{<QUOTE>} and the close quote string to @code{<UNQUOTE>}, the same
-procedure fails to define a new synonym @code{baz}:
-
-@smallexample
-$ @i{cd gnu/m4}
-$ @i{./m4}
-@i{define(foo,0000)}
-
-@i{foo}
-0000
-@i{define(bar,defn(`foo'))}
-
-@i{bar}
-0000
-@i{changequote(<QUOTE>,<UNQUOTE>)}
-
-@i{define(baz,defn(<QUOTE>foo<UNQUOTE>))}
-@i{baz}
-@i{C-D}
-m4: End of input: 0: fatal error: EOF in string
-@end smallexample
-
-@noindent
-Let's use _GDBN__ to try to see what's going on.
-
-@smallexample
-$ @i{_GDBP__ m4}
-Reading symbol data from m4...done.
-(_GDBP__) 
-@end smallexample
-
-@noindent
-_GDBN__ only reads enough symbol data to know where to find the rest
-when needed; as a result, the first prompt comes up very quickly.  We
-then tell _GDBN__ to use a narrower display width than usual, so
-that examples will fit in this manual.
-
-@smallexample
-(_GDBP__) @i{set width 70}
-@end smallexample
-
-@noindent 
-Let's see how the @code{m4} builtin @code{changequote} works.
-Having looked at the source, we know the relevant subroutine is
-@code{m4_changequote}, so we set a breakpoint there with _GDBN__'s
-@code{break} command.
-
-@smallexample
-(_GDBP__) @i{break m4_changequote}
-Breakpoint 1 at 0x62f4: file builtin.c, line 879.
-@end smallexample
-
-@noindent
-Using the @code{run} command, we start @code{m4} running under _GDBN__
-control; as long as control does not reach the @code{m4_changequote}
-subroutine, the program runs as usual:
-
-@smallexample
-(_GDBP__) @i{run}
-Starting program: /work/Editorial/gdb/gnu/m4/m4 
-@i{define(foo,0000)}
-
-@i{foo}
-0000
-@end smallexample
-
-@noindent
-To trigger the breakpoint, we call @code{changequote}.  _GDBN__
-suspends execution of @code{m4}, displaying information about the
-context where it stops.
-
-@smallexample
-@i{changequote(<QUOTE>,<UNQUOTE>)}
-
-Breakpoint 1, m4_changequote (argc=3, argv=0x33c70) at builtin.c:879
-879         if (bad_argc(TOKEN_DATA_TEXT(argv[0]), argc, 1, 3))
-@end smallexample
-
-@noindent
-Now we use the command @code{n} (@code{next}) to advance execution to
-the next line of the current function.
-
-@smallexample
-(_GDBP__) @i{n}
-882         set_quotes((argc >= 2) ? TOKEN_DATA_TEXT(argv[1]) : nil,
-@end smallexample
-
-@noindent
-@code{set_quotes} looks like a promising subroutine.  We can go into it
-by using the command @code{s} (@code{step}) instead of @code{next}.
-@code{step} goes to the next line to be executed in @emph{any}
-subroutine, so it steps into @code{set_quotes}.  
-
-@smallexample
-(_GDBP__) @i{s}
-set_quotes (lq=0x34c78 "<QUOTE>", rq=0x34c88 "<UNQUOTE>")
-    at input.c:530
-530         if (lquote != def_lquote)
-@end smallexample
-
-@noindent
-The summary display showing the subroutine where @code{m4} is now
-suspended (and its arguments) is called a stack frame display.  We can
-use the @code{backtrace} command (which can also be spelled @code{bt}),
-to see where we are in the stack: it displays a stack frame for each
-active subroutine.
-
-@smallexample
-(_GDBP__) @i{bt}
-#0  set_quotes (lq=0x34c78 "<QUOTE>", rq=0x34c88 "<UNQUOTE>")
-    at input.c:530
-#1  0x6344 in m4_changequote (argc=3, argv=0x33c70) at builtin.c:882
-#2  0x8174 in expand_macro (sym=0x33320) at macro.c:242
-#3  0x7a88 in expand_token (obs=0x0, t=209696, td=0xf7fffa30)
-    at macro.c:71
-#4  0x79dc in expand_input () at macro.c:40
-#5  0x2930 in main (argc=0, argv=0xf7fffb20) at m4.c:195
-@end smallexample
-
-@noindent
-Let's step through a few more lines to see what happens.  The first two
-times, we can use @samp{s}; the next two times we use @code{n} to avoid
-falling into the @code{xstrdup} subroutine.
-@smallexample
-(_GDBP__) @i{s}
-0x3b5c  532         if (rquote != def_rquote)
-(_GDBP__) @i{s}
-0x3b80  535         lquote = (lq == nil || *lq == '\0') ? def_lquote :\
- xstrdup(lq);
-(_GDBP__) @i{n}
-536         rquote = (rq == nil || *rq == '\0') ? def_rquote : xstrdup\
-(rq);
-(_GDBP__) @i{n}
-538         len_lquote = strlen(rquote);
-@end smallexample
-
-@noindent
-The last line displayed looks a little odd; let's examine the variables
-@code{lquote} and @code{rquote} to see if they are in fact the new left
-and right quotes we specified.  We can use the command @code{p}
-(@code{print}) to see their values.
-
-@smallexample
-(_GDBP__) @i{p lquote}
-$1 = 0x35d40 "<QUOTE>"
-(_GDBP__) @i{p rquote}
-$2 = 0x35d50 "<UNQUOTE>"
-@end smallexample
-
-@noindent
-@code{lquote} and @code{rquote} are indeed the new left and right quotes.
-Let's look at some context; we can display ten lines of source
-surrounding the current line, with the @code{l} (@code{list}) command.
-
-@smallexample
-(_GDBP__) @i{l}
-533             xfree(rquote);
-534     
-535         lquote = (lq == nil || *lq == '\0') ? def_lquote : xstrdup\
-(lq);
-536         rquote = (rq == nil || *rq == '\0') ? def_rquote : xstrdup\
-(rq);
-537     
-538         len_lquote = strlen(rquote);
-539         len_rquote = strlen(lquote);
-540     @}
-541     
-542     void
-@end smallexample
-
-@noindent
-Let's step past the two lines that set @code{len_lquote} and
-@code{len_rquote}, and then examine the values of those variables.
-
-@smallexample
-(_GDBP__) @i{n}
-539         len_rquote = strlen(lquote);
-(_GDBP__) @i{n}
-540     @}
-(_GDBP__) @i{p len_lquote}
-$3 = 9
-(_GDBP__) @i{p len_rquote}
-$4 = 7
-@end smallexample
-
-@noindent
-That certainly looks wrong, assuming @code{len_lquote} and
-@code{len_rquote} are meant to be the lengths of @code{lquote} and
-@code{rquote} respectively.  Let's try setting them to better values.
-We can use the @code{p} command for this, since it'll print the value of
-any expression---and that expression can include subroutine calls and
-assignments. 
-
-@smallexample
-(_GDBP__) p len_lquote=strlen(lquote)
-$5 = 7
-(_GDBP__) p len_rquote=strlen(rquote)
-$6 = 9
-@end smallexample
-
-@noindent
-Let's see if that fixes the problem of using the new quotes with the
-@code{m4} built-in @code{defn}.  We can allow @code{m4} to continue
-executing with the @code{c} (@code{continue}) command, and then try the
-example that caused trouble initially:
-
-@smallexample
-(_GDBP__) @i{c}
-Continuing.
-
-@i{define(baz,defn(<QUOTE>foo<UNQUOTE>))}
-
-baz
-0000
-@end smallexample
-
-@noindent
-Success!  The new quotes now work just as well as the default ones.  The
-problem seems to have been just the two typos defining the wrong
-lengths.  We'll let @code{m4} exit by giving it an EOF as input.
-
-@smallexample
-@i{C-D}
-Program exited normally.
-@end smallexample
-
-@noindent 
-The message @samp{Program exited normally.} is from _GDBN__; it
-indicates @code{m4} has finished executing.  We can end our _GDBN__
-session with the _GDBN__ @code{quit} command.
-
-@smallexample
-(_GDBP__) @i{quit}
-
-$ 
-_1__@end smallexample
-
index fdc6e33..e69de29 100755 (executable)
@@ -1,288 +0,0 @@
-_dnl__                                                         -*- Texinfo -*-
-_dnl__ Copyright (c) 1988 1989 1990 1991 Free Software Foundation, Inc.
-_dnl__ This file is part of the source for the GDB manual.
-@c M4 FRAGMENT: $Id$
-@node Source, Data, Stack, Top
-@chapter Examining Source Files
-
-_GDBN__ can print parts of your program's source, since the debugging
-information recorded in your program tells _GDBN__ what source files
-were used to built it.  When your program stops, _GDBN__ spontaneously
-prints the line where it stopped.  Likewise, when you select a stack
-frame (@pxref{Selection}), _GDBN__ prints the line where execution in
-that frame has stopped.  You can print other portions of source files by
-explicit command.
-
-If you use _GDBN__ through its GNU Emacs interface, you may prefer to
-use Emacs facilities to view source; @pxref{Emacs}.
-
-@menu
-* List::                       Printing Source Lines
-* Search::                     Searching Source Files
-* Source Path::                        Specifying Source Directories
-* Machine Code::               Source and Machine Code
-@end menu
-
-@node List, Search, Source, Source
-@section Printing Source Lines
-
-@kindex list
-@kindex l
-To print lines from a source file, use the @code{list} command
-(abbreviated @code{l}).  There are several ways to specify what part
-of the file you want to print.
-
-Here are the forms of the @code{list} command most commonly used:
-
-@table @code
-@item list @var{linenum}
-Print ten lines centered around line number @var{linenum} in the
-current source file.
-
-@item list @var{function}
-Print ten lines centered around the beginning of function
-@var{function}.
-
-@item list
-Print ten more lines.  If the last lines printed were printed with a
-@code{list} command, this prints ten lines following the last lines
-printed; however, if the last line printed was a solitary line printed
-as part of displaying a stack frame (@pxref{Stack}), this prints ten
-lines centered around that line.
-
-@item list -
-Print ten lines just before the lines last printed.
-@end table
-
-Repeating a @code{list} command with @key{RET} discards the argument,
-so it is equivalent to typing just @code{list}.  This is more useful
-than listing the same lines again.  An exception is made for an
-argument of @samp{-}; that argument is preserved in repetition so that
-each repetition moves up in the source file.
-
-@cindex linespec
-In general, the @code{list} command expects you to supply zero, one or two
-@dfn{linespecs}.  Linespecs specify source lines; there are several ways
-of writing them but the effect is always to specify some source line.
-Here is a complete description of the possible arguments for @code{list}:
-
-@table @code
-@item list @var{linespec}
-Print ten lines centered around the line specified by @var{linespec}.
-
-@item list @var{first},@var{last}
-Print lines from @var{first} to @var{last}.  Both arguments are
-linespecs.
-
-@item list ,@var{last}
-Print ten lines ending with @var{last}.
-
-@item list @var{first},
-Print ten lines starting with @var{first}.
-
-@item list +
-Print ten lines just after the lines last printed.
-
-@item list -
-Print ten lines just before the lines last printed.
-
-@item list
-As described in the preceding table.
-@end table
-
-Here are the ways of specifying a single source line---all the
-kinds of linespec.
-
-@table @code
-@item @var{number}
-Specifies line @var{number} of the current source file.
-When a @code{list} command has two linespecs, this refers to
-the same source file as the first linespec.
-
-@item +@var{offset}
-Specifies the line @var{offset} lines after the last line printed.
-When used as the second linespec in a @code{list} command that has
-two, this specifies the line @var{offset} lines down from the
-first linespec.
-
-@item -@var{offset}
-Specifies the line @var{offset} lines before the last line printed.
-
-@item @var{filename}:@var{number}
-Specifies line @var{number} in the source file @var{filename}.
-
-@item @var{function}
-@c FIXME: "of the open-brace" is C-centric.  When we add other langs...
-Specifies the line of the open-brace that begins the body of the
-function @var{function}.
-
-@item @var{filename}:@var{function}
-Specifies the line of the open-brace that begins the body of the
-function @var{function} in the file @var{filename}.  You only need the
-file name with a function name to avoid ambiguity when there are
-identically named functions in different source files.
-
-@item *@var{address}
-Specifies the line containing the program address @var{address}.
-@var{address} may be any expression.
-@end table
-
-@node Search, Source Path, List, Source
-@section Searching Source Files
-@cindex searching
-@kindex reverse-search
-
-There are two commands for searching through the current source file for a
-regular expression.
-
-@table @code
-@item forward-search @var{regexp}
-@itemx search @var{regexp}
-@kindex search
-@kindex forward-search
-The command @samp{forward-search @var{regexp}} checks each line, starting
-with the one following the last line listed, for a match for @var{regexp}.
-It lists the line that is found.  You can abbreviate the command name
-as @code{fo}.  The synonym @samp{search @var{regexp}} is also supported.
-
-@item reverse-search @var{regexp}
-The command @samp{reverse-search @var{regexp}} checks each line, starting
-with the one before the last line listed and going backward, for a match
-for @var{regexp}.  It lists the line that is found.  You can abbreviate
-this command as @code{rev}.
-@end table
-
-@node Source Path, Machine Code, Search, Source
-@section Specifying Source Directories
-
-@cindex source path
-@cindex directories for source files
-Executable programs sometimes do not record the directories of the source
-files from which they were compiled, just the names.  Even when they do,
-the directories could be moved between the compilation and your debugging
-session.  _GDBN__ has a list of directories to search for source files;
-this is called the @dfn{source path}.  Each time _GDBN__ wants a source file,
-it tries all the directories in the list, in the order they are present
-in the list, until it finds a file with the desired name.  Note that
-the executable search path is @emph{not} used for this purpose.  Neither is
-the current working directory, unless it happens to be in the source
-path.
-
-If _GDBN__ can't find a source file in the source path, and the object
-program records a directory, _GDBN__ tries that directory too.  If the
-source path is empty, and there is no record of the compilation
-directory, _GDBN__ will, as a last resort, look in the current
-directory.
-
-Whenever you reset or rearrange the source path, _GDBN__ will clear out
-any information it has cached about where source files are found, where
-each line is in the file, etc.
-
-@kindex directory
-When you start _GDBN__, its source path is empty.
-To add other directories, use the @code{directory} command.
-
-@table @code
-@item directory @var{dirname} @dots{}
-Add directory @var{dirname} to the front of the source path.  Several
-directory names may be given to this command, separated by @samp{:} or
-whitespace.  You may specify a directory that is already in the source
-path; this moves it forward, so it will be searched sooner.  You can use
-the string @samp{$cdir} to refer to the compilation directory (if one is
-recorded), and @samp{$cwd} to refer to the current working directory.
-@footnote{@samp{$cwd} is not the same as @samp{.}---the former tracks
-the current working directory as it changes during your _GDBN__ session,
-while the latter is immediately expanded to the current directory at the
-time you add an entry to the source path.}
-
-@item directory
-Reset the source path to empty again.  This requires confirmation.
-
-@c RET-repeat for @code{directory} is explicitly disabled, but since
-@c repeating it would be a no-op we don't say that.  (thanks to RMS)
-
-@item show directories
-@kindex show directories
-Print the source path: show which directories it contains.
-@end table
-
-If your source path is cluttered with directories that are no longer of
-interest, _GDBN__ may sometimes cause confusion by finding the wrong
-versions of source.  You can correct the situation as follows:
-
-@enumerate
-@item
-Use @code{directory} with no argument to reset the source path to empty.
-
-@item
-Use @code{directory} with suitable arguments to reinstall the
-directories you want in the source path.  You can add all the
-directories in one command.
-@end enumerate
-
-@node Machine Code,  , Source Path, Source
-@section Source and Machine Code
-You can use the command @code{info line} to map source lines to program
-addresses (and viceversa), and the command @code{disassemble} to display
-a range of addresses as machine instructions.
-
-@table @code
-@item info line @var{linespec}
-@kindex info line
-Print the starting and ending addresses of the compiled code for
-source line @var{linespec}.  You can specify source lines in any of the
-ways understood by the @code{list} command (@pxref{List}).
-@end table
-
-For example, we can use @code{info line} to inquire on where the object
-code for the first line of function @code{m4_changequote} lies:
-@smallexample
-(_GDBP__) info line m4_changecom
-Line 895 of "builtin.c" starts at pc 0x634c and ends at 0x6350.
-@end smallexample
-
-@noindent
-We can also inquire (using @code{*@var{addr}} as the form for
-@var{linespec}) what source line covers a particular address:
-@smallexample
-(_GDBP__) info line *0x63ff
-Line 926 of "builtin.c" starts at pc 0x63e4 and ends at 0x6404.
-@end smallexample
-
-@kindex $_
-After @code{info line}, the default address for the @code{x}
-command is changed to the starting address of the line, so that
-@samp{x/i} is sufficient to begin examining the machine code
-(@pxref{Memory}).  Also, this address is saved as the value of the
-convenience variable @code{$_} (@pxref{Convenience Vars}).
-
-@table @code
-@kindex disassemble
-@item disassemble
-This specialized command is provided to dump a range of memory as
-machine instructions.  The default memory range is the function
-surrounding the program counter of the selected frame.  A single
-argument to this command is a program counter value; the function
-surrounding this value will be dumped.  Two arguments (separated by one
-or more spaces) specify a range of addresses (first inclusive, second
-exclusive) to be dumped.  
-@end table
-
-We can use @code{disassemble} to inspect the object code
-range shown in the last @code{info line} example:
-
-@smallexample
-(_GDBP__) disas 0x63e4 0x6404
-Dump of assembler code from 0x63e4 to 0x6404:
-0x63e4 <builtin_init+5340>:    ble 0x63f8 <builtin_init+5360>
-0x63e8 <builtin_init+5344>:    sethi %hi(0x4c00), %o0
-0x63ec <builtin_init+5348>:    ld [%i1+4], %o0
-0x63f0 <builtin_init+5352>:    b 0x63fc <builtin_init+5364>
-0x63f4 <builtin_init+5356>:    ld [%o0+4], %o0
-0x63f8 <builtin_init+5360>:    or %o0, 0x1a4, %o0
-0x63fc <builtin_init+5364>:    call 0x9288 <path_search>
-0x6400 <builtin_init+5368>:    nop 
-End of assembler dump.
-(_GDBP__) 
-
-@end smallexample
index 4bed2f5..e69de29 100755 (executable)
@@ -1,279 +0,0 @@
-_dnl__                                                         -*- Texinfo -*-
-_dnl__ Copyright (c) 1988 1989 1990 1991 Free Software Foundation, Inc.
-_dnl__ This file is part of the source for the GDB manual.
-@c M4 FRAGMENT: $Id$
-@node Stack, Source, Stopping, Top
-@chapter Examining the Stack
-
-When your program has stopped, the first thing you need to know is where it
-stopped and how it got there.
-
-@cindex call stack
-Each time your program performs a function call, the information about
-where in the program the call was made from is saved in a block of data
-called a @dfn{stack frame}.  The frame also contains the arguments of the
-call and the local variables of the function that was called.  All the
-stack frames are allocated in a region of memory called the @dfn{call
-stack}.
-
-When your program stops, the _GDBN__ commands for examining the stack allow you
-to see all of this information.
-
-@cindex selected frame
-One of the stack frames is @dfn{selected} by _GDBN__ and many _GDBN__ commands
-refer implicitly to the selected frame.  In particular, whenever you ask
-_GDBN__ for the value of a variable in the program, the value is found in the
-selected frame.  There are special _GDBN__ commands to select whichever frame
-you are interested in.
-
-When the program stops, _GDBN__ automatically selects the currently executing
-frame and describes it briefly as the @code{frame} command does
-(@pxref{Frame Info, Info}).
-
-@menu
-* Frames::                     Stack Frames
-* Backtrace::                  Backtraces
-* Selection::                  Selecting a Frame
-* Frame Info::                 Information on a Frame
-@end menu
-
-@node Frames, Backtrace, Stack, Stack
-@section Stack Frames
-
-@cindex frame
-@cindex stack frame
-The call stack is divided up into contiguous pieces called @dfn{stack
-frames}, or @dfn{frames} for short; each frame is the data associated
-with one call to one function.  The frame contains the arguments given
-to the function, the function's local variables, and the address at
-which the function is executing.
-
-@cindex initial frame
-@cindex outermost frame
-@cindex innermost frame
-When your program is started, the stack has only one frame, that of the
-function @code{main}.  This is called the @dfn{initial} frame or the
-@dfn{outermost} frame.  Each time a function is called, a new frame is
-made.  Each time a function returns, the frame for that function invocation
-is eliminated.  If a function is recursive, there can be many frames for
-the same function.  The frame for the function in which execution is
-actually occurring is called the @dfn{innermost} frame.  This is the most
-recently created of all the stack frames that still exist.
-
-@cindex frame pointer
-Inside your program, stack frames are identified by their addresses.  A
-stack frame consists of many bytes, each of which has its own address; each
-kind of computer has a convention for choosing one of those bytes whose
-address serves as the address of the frame.  Usually this address is kept
-in a register called the @dfn{frame pointer register} while execution is
-going on in that frame.
-
-@cindex frame number
-_GDBN__ assigns numbers to all existing stack frames, starting with
-zero for the innermost frame, one for the frame that called it,
-and so on upward.  These numbers do not really exist in your program;
-they are assigned by _GDBN__ to give you a way of designating stack
-frames in _GDBN__ commands.
-
-@cindex frameless execution
-Some compilers allow functions to be compiled so that they operate
-without stack frames.  (For example, the @code{_GCC__} option
-@samp{-fomit-frame-pointer} will generate functions without a frame.)
-This is occasionally done with heavily used library functions to save
-the frame setup time.  _GDBN__ has limited facilities for dealing with
-these function invocations.  If the innermost function invocation has no
-stack frame, _GDBN__ will nevertheless regard it as though it had a
-separate frame, which is numbered zero as usual, allowing correct
-tracing of the function call chain.  However, _GDBN__ has no provision
-for frameless functions elsewhere in the stack.
-
-@node Backtrace, Selection, Frames, Stack
-@section Backtraces
-
-A backtrace is a summary of how the program got where it is.  It shows one
-line per frame, for many frames, starting with the currently executing
-frame (frame zero), followed by its caller (frame one), and on up the
-stack.
-
-@table @code
-@item backtrace
-@itemx bt
-@kindex backtrace
-@kindex bt
-Print a backtrace of the entire stack: one line per frame for all
-frames in the stack.
-
-You can stop the backtrace at any time by typing the system interrupt
-character, normally @kbd{Control-C}.
-
-@item backtrace @var{n}
-@itemx bt @var{n}
-Similar, but print only the innermost @var{n} frames.
-
-@item backtrace -@var{n}
-@itemx bt -@var{n}
-Similar, but print only the outermost @var{n} frames.
-@end table
-
-@kindex where
-@kindex info stack
-@kindex info s
-The names @code{where} and @code{info stack} (abbreviated @code{info s})
-are additional aliases for @code{backtrace}.
-
-Each line in the backtrace shows the frame number and the function name.
-The program counter value is also shown---unless you use @code{set
-print address off}.  The backtrace also shows the source file name and
-line number, as well as the arguments to the function.  The program
-counter value is omitted if it is at the beginning of the code for that
-line number.
-
-Here is an example of a backtrace.  It was made with the command
-@samp{bt 3}, so it shows the innermost three frames.
-
-@smallexample
-@group
-#0  m4_traceon (obs=0x24eb0, argc=1, argv=0x2b8c8) at builtin.c:993
-#1  0x6e38 in expand_macro (sym=0x2b600) at macro.c:242
-#2  0x6840 in expand_token (obs=0x0, t=177664, td=0xf7fffb08)
-    at macro.c:71
-(More stack frames follow...)
-@end group
-@end smallexample
-
-@noindent
-The display for frame zero doesn't begin with a program counter
-value, indicating that the program has stopped at the beginning of the
-code for line @code{993} of @code{builtin.c}.
-
-@node Selection, Frame Info, Backtrace, Stack
-@section Selecting a Frame
-
-Most commands for examining the stack and other data in the program work on
-whichever stack frame is selected at the moment.  Here are the commands for
-selecting a stack frame; all of them finish by printing a brief description
-of the stack frame just selected.
-
-@table @code
-@item frame @var{n}
-@itemx f @var{n}
-@kindex frame
-@kindex f
-Select frame number @var{n}.  Recall that frame zero is the innermost
-(currently executing) frame, frame one is the frame that called the
-innermost one, and so on.  The highest-numbered frame is @code{main}'s
-frame.
-
-@item frame @var{addr}
-@itemx f @var{addr}
-Select the frame at address @var{addr}.  This is useful mainly if the
-chaining of stack frames has been damaged by a bug, making it
-impossible for _GDBN__ to assign numbers properly to all frames.  In
-addition, this can be useful when the program has multiple stacks and
-switches between them.
-
-_if_(_SPARC__)
-On the SPARC architecture, @code{frame} needs two addresses to
-select an arbitrary frame: a frame pointer and a stack pointer.  
-@c note to future updaters: this is conditioned on a flag
-@c FRAME_SPECIFICATION_DYADIC in the tm-*.h files, currently only used
-@c by SPARC, hence the specific attribution.  Generalize or list all
-@c possibilities if more supported machines start doing this.
-_fi_(_SPARC__)
-
-@item up @var{n}
-@kindex up
-Move @var{n} frames up the stack.  For positive numbers @var{n}, this
-advances toward the outermost frame, to higher frame numbers, to frames
-that have existed longer.  @var{n} defaults to one.
-
-@item down @var{n}
-@kindex down
-@kindex do
-Move @var{n} frames down the stack.  For positive numbers @var{n}, this
-advances toward the innermost frame, to lower frame numbers, to frames
-that were created more recently.  @var{n} defaults to one.  You may
-abbreviate @code{down} as @code{do}.
-@end table
-
-All of these commands end by printing two lines of output describing the
-frame.  The first line shows the frame number, the function name, the
-arguments, and the source file and line number of execution in that
-frame.  The second line shows the text of that source line.  For
-example:
-
-@smallexample
-(_GDBP__) up
-#1  0x22f0 in main (argc=1, argv=0xf7fffbf4, env=0xf7fffbfc) at env.c:10
-10              read_input_file (argv[i]);
-@end smallexample
-
-After such a printout, the @code{list} command with no arguments will print
-ten lines centered on the point of execution in the frame.  @xref{List}.
-
-@table @code
-@item up-silently @var{n}
-@itemx down-silently @var{n}
-@kindex down-silently
-@kindex up-silently
-These two commands are variants of @code{up} and @code{down},
-respectively; they differ in that they do their work silently, without
-causing display of the new frame.  They are intended primarily for use
-in _GDBN__ command scripts, where the output might be unnecessary and
-distracting. 
-
-@end table
-
-@node Frame Info,  , Selection, Stack
-@section Information About a Frame
-
-There are several other commands to print information about the selected
-stack frame.
-
-@table @code
-@item frame
-@itemx f
-When used without any argument, this command does not change which frame
-is selected, but prints a brief description of the currently
-selected stack frame.  It can be abbreviated @code{f}.  With an
-argument, this command is used to select a stack frame (@pxref{Selection}).
-
-@item info frame
-@kindex info frame
-@itemx info f
-@kindex info f
-This command prints a verbose description of the selected stack frame,
-including the address of the frame, the addresses of the next frame down
-(called by this frame) and the next frame up (caller of this frame),
-the address of the frame's arguments, the program counter saved in it
-(the address of execution in the caller frame), and which registers
-were saved in the frame.  The verbose description is useful when
-something has gone wrong that has made the stack format fail to fit
-the usual conventions.
-
-@item info frame @var{addr}
-@itemx info f @var{addr}
-Print a verbose description of the frame at address @var{addr},
-without selecting that frame.  The selected frame remains unchanged by
-this command.
-
-@item info args
-@kindex info args
-Print the arguments of the selected frame, each on a separate line.
-
-@item info locals
-@kindex info locals
-Print the local variables of the selected frame, each on a separate
-line.  These are all variables declared static or automatic within all
-program blocks that execution in this frame is currently inside of.
-
-@item info catch
-@kindex info catch
-@cindex catch exceptions
-@cindex exception handlers
-Print a list of all the exception handlers that are active in the
-current stack frame at the current point of execution.  To see other
-exception handlers, visit the associated frame (using the @code{up},
-@code{down}, or @code{frame} commands); then type @code{info catch}.
-@xref{Exception Handling}.
-@end table
index 934d786..e69de29 100755 (executable)
@@ -1,920 +0,0 @@
-_dnl__                                                         -*- Texinfo -*-
-_dnl__ Copyright (c) 1988 1989 1990 1991 Free Software Foundation, Inc.
-_dnl__ This file is part of the source for the GDB manual.
-@c M4 FRAGMENT: $Id$
-@node Stopping, Stack, Running, Top
-@chapter Stopping and Continuing
-
-When you run a program normally, it runs until it terminates.  The
-principal purpose of using a debugger is so that you can stop your
-program before it terminates; or so that, if the program runs into
-trouble, you can investigate and find out why.
-
-Inside _GDBN__, your program may stop for any of several reasons, such
-as a signal, a breakpoint, or reaching a new line after a _GDBN__
-command such as @code{step}.  Usually, the messages shown by _GDBN__
-provide ample explanation of the status of your program---but you can
-also explicitly request this information at any time.
-
-@table @code
-@item info program
-@kindex info program
-Display information about the status of your program: whether it is
-running or not, what process it is, and why it stopped.
-@end table
-
-@menu
-* Breakpoints::                        Breakpoints, Watchpoints, and Exceptions
-* Stepping::                   Stepping
-* Continuing::                 Continuing
-* Signals::                    Signals
-@end menu
-
-@node Breakpoints, Stepping, Stopping, Stopping
-@section Breakpoints, Watchpoints, and Exceptions
-
-@cindex breakpoints
-A @dfn{breakpoint} makes your program stop whenever a certain point in
-the program is reached.  For each breakpoint, you can add various
-conditions to control in finer detail whether the program will stop.
-You can set breakpoints with the @code{break} command and its variants
-(@pxref{Set Breaks}), to specify the place where the program should stop
-by line number, function name or exact address in the program.  In
-languages with exception handling (such as GNU C++), you can also set
-breakpoints  where an execption is raised (@pxref{Exception Handling}).
-
-@cindex watchpoints
-A @dfn{watchpoint} is a special breakpoint that stops your program when
-the value of an expression changes.  You must use a different command to
-set watchpoints (@pxref{Set Watchpoints}), but aside from that, you can
-manage a watchpoint exactly like any other breakpoint: you enable, disable, and
-delete both breakpoints and watchpoints using exactly the same commands.
-
-Each breakpoint or watchpoint is assigned a number when it is created;
-these numbers are successive integers starting with one.  In many of the
-commands for controlling various features of breakpoints you use the
-breakpoint number to say which breakpoint you want to change.  Each
-breakpoint may be @dfn{enabled} or @dfn{disabled}; if disabled, it has
-no effect on the program until you enable it again.
-
-@menu
-* Set Breaks::                 Setting Breakpoints
-* Set Watchpoints::            Setting Watchpoints
-* Exception Handling::         Breakpoints and Exceptions
-* Delete Breaks::              Deleting Breakpoints
-* Disabling::                  Disabling Breakpoints
-* Conditions::                 Break Conditions
-* Break Commands::             Breakpoint Command Lists
-* Breakpoint Menus::           Breakpoint Menus
-* Error in Breakpoints::       
-@end menu
-
-@node Set Breaks, Set Watchpoints, Breakpoints, Breakpoints
-@subsection Setting Breakpoints
-
-@kindex break
-@kindex b
-Breakpoints are set with the @code{break} command (abbreviated @code{b}).
-
-You have several ways to say where the breakpoint should go.
-
-@table @code
-@item break @var{function}
-Set a breakpoint at entry to function @var{function}.  When using source
-languages that permit overloading of symbols, such as C++,
-@var{function} may refer to more than one possible place to break.
-@xref{Breakpoint Menus}, for a discussion of that situation.
-
-@item break +@var{offset}
-@itemx break -@var{offset}
-Set a breakpoint some number of lines forward or back from the position
-at which execution stopped in the currently selected frame.
-
-@item break @var{linenum}
-Set a breakpoint at line @var{linenum} in the current source file.
-That file is the last file whose source text was printed.  This
-breakpoint will stop the program just before it executes any of the
-code on that line.
-
-@item break @var{filename}:@var{linenum}
-Set a breakpoint at line @var{linenum} in source file @var{filename}.
-
-@item break @var{filename}:@var{function}
-Set a breakpoint at entry to function @var{function} found in file
-@var{filename}.  Specifying a file name as well as a function name is
-superfluous except when multiple files contain similarly named
-functions.
-
-@item break *@var{address}
-Set a breakpoint at address @var{address}.  You can use this to set
-breakpoints in parts of the program which do not have debugging
-information or source files.
-
-@item break
-When called without any arguments, @code{break} sets a breakpoint at the
-next instruction to be executed in the selected stack frame
-(@pxref{Stack}).  In any selected frame but the innermost, this will
-cause the program to stop as soon as control returns to that frame.
-This is similar to the effect of a @code{finish} command in the frame
-inside the selected frame---except that @code{finish} doesn't leave an
-active breakpoint.  If you use @code{break} without an argument in the
-innermost frame, _GDBN__ will stop the next time it reaches the current
-location; this may be useful inside loops.
-
-_GDBN__ normally ignores breakpoints when it resumes execution, until at
-least one instruction has been executed.  If it did not do this, you
-would be unable to proceed past a breakpoint without first disabling the
-breakpoint.  This rule applies whether or not the breakpoint already
-existed when the program stopped.
-
-@item break @dots{} if @var{cond}
-Set a breakpoint with condition @var{cond}; evaluate the expression
-@var{cond} each time the breakpoint is reached, and stop only if the
-value is nonzero.  @samp{@dots{}} stands for one of the possible
-arguments described above (or no argument) specifying where to break.
-@xref{Conditions}, for more information on breakpoint conditions.
-
-@item tbreak @var{args}
-@kindex tbreak
-Set a breakpoint enabled only for one stop.  @var{args} are the
-same as in the @code{break} command, and the breakpoint is set in the same
-way, but the breakpoint is automatically disabled the first time it
-is hit.  @xref{Disabling}.
-
-@item rbreak @var{regex}
-@kindex rbreak
-Set a breakpoint on all functions matching @var{regex}.  This is
-useful for setting breakpoints on overloaded functions that are not
-members of any special classes.  This command sets an unconditional
-breakpoint on all matches, printing a list of all breakpoints it set.
-Once these breakpoints are set, they are treated just like the
-breakpoints set with the @code{break} command.  They can be deleted,
-disabled, made conditional, etc., in the standard ways.
-
-@kindex info breakpoints
-@kindex $_
-@item info breakpoints
-The command @code{info breakpoints} prints a list of all breakpoints
-(but not watchpoints) set and not deleted, showing their numbers, where
-in the program they are, and any special features in use for them.
-Disabled breakpoints are included in the list, but marked as disabled.
-@code{info break} with a breakpoint number as argument lists only that
-breakpoint.  The convenience variable @code{$_} and the default
-examining-address for the @code{x} command are set to the address of the
-last breakpoint listed (@pxref{Memory}).  The equivalent command for
-watchpoints is @code{info watch}.
-@end table
-
-_GDBN__ allows you to set any number of breakpoints at the same place in the
-program.  There is nothing silly or meaningless about this.  When the
-breakpoints are conditional, this is even useful (@pxref{Conditions}).
-
-@node Set Watchpoints, Exception Handling, Set Breaks, Breakpoints
-@subsection Setting Watchpoints
-@cindex setting watchpoints
-You can use a watchpoint to stop execution whenever the value of an
-expression changes, without having to predict a particular place in the
-inferior process where this may happen.
-
-Watchpoints currently execute two orders of magnitude more slowly than
-other breakpoints, but this can well be worth it to catch errors where
-you have no clue what part of your program is the culprit.  Some
-processors provide special hardware to implement this feature; future
-releases of _GDBN__ will use such hardware if it is available.
-
-@table @code
-@kindex watch 
-@item watch @var{expr}
-Set a watchpoint for an expression.
-
-@kindex info watchpoints
-@item info watchpoints
-This command prints a list of watchpoints; it is otherwise similar to
-@code{info break}.
-@end table
-
-@node Exception Handling, Delete Breaks, Set Watchpoints, Breakpoints
-@subsection Breakpoints and Exceptions
-@cindex exception handlers
-
-Some languages, such as GNU C++, implement exception handling.  _GDBN__
-can be used to examine what caused the program to raise an exception
-and to list the exceptions the program is prepared to handle at a
-given point in time.
-
-@table @code
-@item catch @var{exceptions}
-@kindex catch
-
-You can set breakpoints at active exception handlers by using the
-@code{catch} command.  @var{exceptions} is a list of names of exceptions
-to catch.
-@end table
-
-You can use @code{info catch} to list active exception handlers;
-@pxref{Frame Info}.
-
-There are currently some limitations to exception handling in _GDBN__.
-These will be corrected in a future release.
-
-@itemize @bullet
-@item
-If you call a function interactively, _GDBN__ normally returns
-control to you when the function has finished executing.  If the call
-raises an exception, however, the call may bypass the mechanism that
-returns control to the user and cause the program to simply continue
-running until it hits a breakpoint, catches a signal that _GDBN__ is
-listening for, or exits.
-@item
-You cannot raise an exception interactively.
-@item
-You cannot interactively install an exception handler.
-@end itemize
-
-@cindex raise exceptions
-Sometimes @code{catch} is not the best way to debug exception handling:
-if you need to know exactly where an exception is raised, it's better to
-stop @emph{before} the exception handler is called, since that way you
-can see the stack before any unwinding takes place.  If you set a
-breakpoint in an exception handler instead, it may not be easy to find
-out where the exception was raised.
-
-To stop just before an exception handler is called, you need some
-knowledge of the implementation.  In the case of GNU C++ exception are
-raised by calling a library function named @code{__raise_exception}
-which has the following ANSI C interface:
-
-@example
-    /* ADDR is where the exception identifier is stored.
-       ID is the exception identifier.  */
-    void __raise_exception (void **@var{addr}, void *@var{id});
-@end example
-
-@noindent
-To make the debugger catch all exceptions before any stack
-unwinding takes place, set a breakpoint on @code{__raise_exception}
-(@pxref{Breakpoints}).  
-
-With a conditional breakpoint (@xref{Conditions}) that depends on the
-value of @var{id}, you can stop your program when a specific exception
-is raised.  You can use multiple conditional breakpoints to stop the
-program when any of a number of exceptions are raised.
-
-@node Delete Breaks, Disabling, Exception Handling, Breakpoints
-@subsection Deleting Breakpoints
-
-@cindex clearing breakpoints, watchpoints
-@cindex deleting breakpoints, watchpoints
-It is often necessary to eliminate a breakpoint or watchpoint once it
-has done its job and you no longer want the program to stop there.  This
-is called @dfn{deleting} the breakpoint.  A breakpoint that has been
-deleted no longer exists in any sense; it is forgotten.
-
-With the @code{clear} command you can delete breakpoints according to
-where they are in the program.  With the @code{delete} command you can
-delete individual breakpoints or watchpoints by specifying their
-breakpoint numbers.
-
-It is not necessary to delete a breakpoint to proceed past it.  _GDBN__
-automatically ignores breakpoints on the first instruction to be executed
-when you continue execution without changing the execution address.
-
-@table @code
-@item clear
-@kindex clear
-Delete any breakpoints at the next instruction to be executed in the
-selected stack frame (@pxref{Selection}).  When the innermost frame
-is selected, this is a good way to delete a breakpoint that the program
-just stopped at.
-
-@item clear @var{function}
-@itemx clear @var{filename}:@var{function}
-Delete any breakpoints set at entry to the function @var{function}.
-
-@item clear @var{linenum}
-@itemx clear @var{filename}:@var{linenum}
-Delete any breakpoints set at or within the code of the specified line.
-
-@item delete breakpoints @var{bnums}@dots{}
-@itemx delete @var{bnums}@dots{}
-@itemx delete
-@cindex delete breakpoints
-@kindex delete
-@kindex d
-Delete the breakpoints or watchpoints of the numbers specified as
-arguments.  If no argument is specified, delete all breakpoints.  You
-can abbreviate this command as @code{d}.
-@end table
-
-@node Disabling, Conditions, Delete Breaks, Breakpoints
-@subsection Disabling Breakpoints
-
-@cindex disabled breakpoints
-@cindex enabled breakpoints
-Rather than deleting a breakpoint or watchpoint, you might prefer to
-@dfn{disable} it.  This makes the breakpoint inoperative as if it had
-been deleted, but remembers the information on the breakpoint so that
-you can @dfn{enable} it again later.
-
-You disable and enable breakpoints and watchpoints with the
-@code{enable} and @code{disable} commands, optionally specifying one or
-more breakpoint numbers as arguments.  Use @code{info break} or
-@code{info watch} to print a list of breakpoints or watchpoints if you
-don't know which numbers to use.
-
-A breakpoint or watchpoint can have any of four different states of
-enablement:
-
-@itemize @bullet
-@item
-Enabled.  The breakpoint will stop the program.  A breakpoint made
-with the @code{break} command starts out in this state.
-@item
-Disabled.  The breakpoint has no effect on the program.
-@item
-Enabled once.  The breakpoint will stop the program, but
-when it does so it will become disabled.  A breakpoint made
-with the @code{tbreak} command starts out in this state.
-@item
-Enabled for deletion.  The breakpoint will stop the program, but
-immediately after it does so it will be deleted permanently.
-@end itemize
-
-You can use the following commands to enable or disable breakpoints and
-watchpoints:
-
-@table @code
-@item disable breakpoints @var{bnums}@dots{}
-@itemx disable @var{bnums}@dots{}
-@itemx disable
-@kindex disable breakpoints
-@kindex disable
-@kindex dis
-Disable the specified breakpoints---or all breakpoints, if none are
-listed.  A disabled breakpoint has no effect but is not forgotten.  All
-options such as ignore-counts, conditions and commands are remembered in
-case the breakpoint is enabled again later.  You may abbreviate
-@code{disable} as @code{dis}.
-
-@item enable breakpoints @var{bnums}@dots{}
-@itemx enable @var{bnums}@dots{}
-@itemx enable
-@kindex enable breakpoints
-@kindex enable
-Enable the specified breakpoints (or all defined breakpoints).  They
-become effective once again in stopping the program, until you specify
-otherwise.
-
-@item enable breakpoints once @var{bnums}@dots{}
-@itemx enable once @var{bnums}@dots{}
-Enable the specified breakpoints temporarily.  Each will be disabled
-again the next time it stops the program (unless you have used one of
-these commands to specify a different state before that time comes).
-
-@item enable breakpoints delete @var{bnums}@dots{}
-@itemx enable delete @var{bnums}@dots{}
-Enable the specified breakpoints to work once and then die.  Each of
-the breakpoints will be deleted the next time it stops the program
-(unless you have used one of these commands to specify a different
-state before that time comes).
-@end table
-
-Save for a breakpoint set with @code{tbreak} (@pxref{Set Breaks}),
-breakpoints that you set initially enabled; subsequently, they become
-disabled or enabled only when you use one of the commands above.  (The
-command @code{until} can set and delete a breakpoint of its own, but it
-will not change the state of your other breakpoints;
-@pxref{Stepping}.)
-
-@node Conditions, Break Commands, Disabling, Breakpoints
-@subsection Break Conditions
-@cindex conditional breakpoints
-@cindex breakpoint conditions
-
-The simplest sort of breakpoint breaks every time the program reaches a
-specified place.  You can also specify a @dfn{condition} for a
-breakpoint.  A condition is just a Boolean expression in your
-programming language.  (@xref{Expressions}).  A breakpoint with a
-condition evaluates the expression each time the program reaches it, and
-the program stops only if the condition is true.
-
-Conditions are also accepted for watchpoints; you may not need them,
-since a watchpoint is inspecting the value of an expression anyhow---but
-it might be simpler, say, to just set a watchpoint on a variable name,
-then have a condition that tests whether the new value is an interesting
-one. 
-
-Break conditions may have side effects, and may even call functions in your
-program.  These may sound like strange things to do, but their effects are
-completely predictable unless there is another enabled breakpoint at the
-same address.  (In that case, _GDBN__ might see the other breakpoint first and
-stop the program without checking the condition of this one.)  Note that
-breakpoint commands are usually more convenient and flexible for the
-purpose of performing side effects when a breakpoint is reached
-(@pxref{Break Commands}).
-
-Break conditions can be specified when a breakpoint is set, by using
-@samp{if} in the arguments to the @code{break} command.  @xref{Set Breaks}.
-They can also be changed at any time with the @code{condition} command.
-The @code{watch} command doesn't recognize the @code{if} keyword;
-@code{condition} is the only way to impose a further condition on a
-watchpoint. 
-
-@table @code
-@item condition @var{bnum} @var{expression}
-@kindex condition
-Specify @var{expression} as the break condition for breakpoint or
-watchpoint number @var{bnum}.  From now on, this breakpoint will stop
-the program only if the value of @var{expression} is true (nonzero, in
-C).  When you call @code{condition}, the expression you specify is
-checked immediately for syntactic correctness, and to determine whether
-symbols in it have referents in the context of your breakpoint.  _GDBN__
-does not actually evaluate @var{expression} at the time the
-@code{condition} command is given, however.  @xref{Expressions}.
-
-@item condition @var{bnum}
-Remove the condition from breakpoint number @var{bnum}.  It becomes
-an ordinary unconditional breakpoint.
-@end table
-
-@cindex ignore count (of breakpoint)
-A special case of a breakpoint condition is to stop only when the
-breakpoint has been reached a certain number of times.  This is so
-useful that there is a special way to do it, using the @dfn{ignore
-count} of the breakpoint.  Every breakpoint has an ignore count, which
-is an integer.  Most of the time, the ignore count is zero, and
-therefore has no effect.  But if the program reaches a breakpoint whose
-ignore count is positive, then instead of stopping, it just decrements
-the ignore count by one and continues.  As a result, if the ignore count
-value is @var{n}, the breakpoint will not stop the next @var{n} times it
-is reached.
-
-@table @code
-@item ignore @var{bnum} @var{count}
-@kindex ignore
-Set the ignore count of breakpoint number @var{bnum} to @var{count}.
-The next @var{count} times the breakpoint is reached, your program's
-execution will not stop; other than to decrement the ignore count, _GDBN__
-takes no action.
-
-To make the breakpoint stop the next time it is reached, specify
-a count of zero.
-
-@item continue @var{count}
-@itemx c @var{count}
-@itemx fg @var{count}
-@kindex continue @var{count}
-Continue execution of the program, setting the ignore count of the
-breakpoint that the program stopped at to @var{count} minus one.
-Thus, the program will not stop at this breakpoint until the
-@var{count}'th time it is reached.
-
-An argument to this command is meaningful only when the program stopped
-due to a breakpoint.  At other times, the argument to @code{continue} is
-ignored.
-
-The synonym @code{fg} is provided purely for convenience, and has
-exactly the same behavior as other forms of the command.
-@end table
-
-If a breakpoint has a positive ignore count and a condition, the condition
-is not checked.  Once the ignore count reaches zero, the condition will
-be checked.
-
-You could achieve the effect of the ignore count with a
-condition such as _0__@w{@samp{$foo-- <= 0}}_1__ using a debugger convenience
-variable that is decremented each time.  @xref{Convenience Vars}.
-
-@node Break Commands, Breakpoint Menus, Conditions, Breakpoints
-@subsection Breakpoint Command Lists
-
-@cindex breakpoint commands
-You can give any breakpoint (or watchpoint) a series of commands to
-execute when the program stops due to that breakpoint.  For example, you
-might want to print the values of certain expressions, or enable other
-breakpoints.
-
-@table @code
-@item commands @var{bnum}
-@itemx @dots{} @var{command-list} @dots{}
-@itemx end
-@kindex commands
-@kindex end
-Specify a list of commands for breakpoint number @var{bnum}.  The commands
-themselves appear on the following lines.  Type a line containing just
-@code{end} to terminate the commands.
-
-To remove all commands from a breakpoint, use the command
-@code{commands} and follow it immediately by @code{end}; that is, give
-no commands.
-
-With no @var{bnum} argument, @code{commands} refers to the last
-breakpoint or watchpoint set (not to the breakpoint most recently
-encountered).
-@end table
-
-Pressing @key{RET} as a means of repeating the last _GDBN__ command is
-disabled from the time you enter @code{commands} to just after the
-corresponding @code{end}. 
-
-You can use breakpoint commands to start the program up again.  Simply
-use the @code{continue} command, or @code{step}, or any other command to
-resume execution.  However, if you do this, any further commands in the
-same breakpoint's command list are ignored.  When the program stops
-again, _GDBN__ will act according to the cause of that stop.
-
-@kindex silent
-If the first command specified is @code{silent}, the usual message about
-stopping at a breakpoint is not printed.  This may be desirable for
-breakpoints that are to print a specific message and then continue.
-If the remaining commands too print nothing, you will see no sign that
-the breakpoint was reached at all.  @code{silent} is not really a command;
-it is meaningful only at the beginning of the commands for a breakpoint.
-
-The commands @code{echo} and @code{output} that allow you to print precisely
-controlled output are often useful in silent breakpoints.  @xref{Output}.
-
-For example, here is how you could use breakpoint commands to print the
-value of @code{x} at entry to @code{foo} whenever @code{x} is positive.
-
-_0__@example
-break foo if x>0
-commands
-silent
-echo x is\040
-output x
-echo \n
-cont
-end
-_1__@end example
-
-One application for breakpoint commands is to correct one bug so you can
-test another.  Put a breakpoint just after the erroneous line of code, give
-it a condition to detect the case in which something erroneous has been
-done, and give it commands to assign correct values to any variables that
-need them.  End with the @code{continue} command so that the program does not
-stop, and start with the @code{silent} command so that no output is
-produced.  Here is an example:
-
-@example
-break 403
-commands
-silent
-set x = y + 4
-cont
-end
-@end example
-
-@cindex lost output
-One deficiency in the operation of automatically continuing breakpoints
-under Unix appears when your program uses raw mode for the terminal.
-_GDBN__ switches back to its own terminal modes (not raw) before executing
-commands, and then must switch back to raw mode when your program is
-continued.  This causes any pending terminal input to be lost. 
-In the GNU system, this will be fixed by changing the behavior of
-terminal modes.
-
-Under Unix, when you have this problem, you might be able to get around
-it by putting your actions into the breakpoint condition instead of
-commands.  For example
-
-@example
-condition 5  (x = y + 4), 0
-@end example
-
-@noindent
-specifies a condition expression (@xref{Expressions}) that will change
-@code{x} as needed, then always have the value zero so the program will not
-stop.  Loss of input is avoided here because break conditions are
-evaluated without changing the terminal modes.  When you want to have
-nontrivial conditions for performing the side effects, the operators
-@samp{&&}, @samp{||} and @samp{?@dots{}:} may be useful.
-
-@node Breakpoint Menus, Error in Breakpoints, Break Commands, Breakpoints
-@subsection Breakpoint Menus
-@cindex C++ overloading
-@cindex symbol overloading
-
-Some programming languages (notably C++) permit a single function name
-to be defined several times, for application in different contexts.
-This is called @dfn{overloading}.  When a function name is overloaded,
-@samp{break @var{function}} is not enough to tell _GDBN__ where you want
-a breakpoint.  _GDBN__ responds to this situation by offering you a menu
-of numbered choices for different possible breakpoints, and waiting for
-your selection with the prompt @samp{>}.  The first two
-options are always @samp{[0] cancel} and @samp{[1] all}.  Typing @kbd{1}
-will set a breakpoint at all the definitions available for
-@var{function}, and typing @kbd{0} will abort the @code{break} command
-without setting any new breakpoints.
-
-For example, the following session excerpt shows an attempt to set a
-breakpoint at the overloaded symbol @code{String::after}.  In the
-example, we choose three particular definitions of the function:
-
-@example
-(_GDBP__) b String::after
-[0] cancel
-[1] all
-[2] file:String.cc; line number:867
-[3] file:String.cc; line number:860
-[4] file:String.cc; line number:875
-[5] file:String.cc; line number:853
-[6] file:String.cc; line number:846
-[7] file:String.cc; line number:735
-> 2 4 6
-Breakpoint 1 at 0xb26c: file String.cc, line 867.
-Breakpoint 2 at 0xb344: file String.cc, line 875.
-Breakpoint 3 at 0xafcc: file String.cc, line 846.
-Multiple breakpoints were set.
-Use the "delete" command to delete unwanted breakpoints.
-(_GDBP__) 
-@end example
-
-
-@node Error in Breakpoints,  , Breakpoint Menus, Breakpoints
-@subsection ``Cannot Insert Breakpoints''
-
-@c FIXME: "cannot insert breakpoints" error, v unclear.  
-@c        Q in pending mail to Gilmore. ---pesch@cygnus.com, 26mar91
-Under some operating systems, breakpoints cannot be used in a program if
-any other process is running that program.  In this situation,
-attempting to run or continue a program with a breakpoint will cause _GDBN__
-to stop the other process.
-
-When this happens, you have three ways to proceed:
-
-@enumerate
-@item
-Remove or disable the breakpoints, then continue.
-
-@item
-Suspend _GDBN__, and copy the file containing the program to a new name.
-Resume _GDBN__ and use the @code{exec-file} command to specify that _GDBN__
-should run the program under that name.  Then start the program again.
-
-@c FIXME: RMS commented here "Show example".  Maybe when someone
-@c explains the first FIXME: in this section...
-
-@item
-Relink the program so that the text segment is nonsharable, using the
-linker option @samp{-N}.  The operating system limitation may not apply
-to nonsharable executables.
-@end enumerate
-
-@node Stepping, Continuing, Breakpoints, Stopping
-@section Stepping
-
-@cindex stepping
-@dfn{Stepping} means setting your program in motion for a limited time,
-so that control will return automatically to _GDBN__ after one line of
-code or one machine instruction.  @footnote{Your program might stop even
-sooner, during stepping, since a signal may arrive before your program
-reaches the next source line.  Also, since breakpoints are active during
-stepping, your program will stop for them even if it has not gone as far
-as the stepping command specifies.}
-
-A typical technique for using stepping is to put a breakpoint
-(@pxref{Breakpoints}) at the beginning of the function or the section of
-the program in which a problem is believed to lie, run the program until
-it stops at that breakpoint, and then step through the suspect area,
-examining the variables that are interesting, until you see the problem
-happen.
-
-@table @code
-@item step
-@kindex step
-@kindex s
-Continue running the program until control reaches a different source
-line, then stop it and return control to the debugger.  This command is
-abbreviated @code{s}.
-
-You may use the @code{step} command when control is within a function
-for which there is no debugging information.  In that case, execution
-will proceed until control reaches a different function, or is about to
-return from this function.
-
-@item step @var{count}
-Continue running as in @code{step}, but do so @var{count} times.  If a
-breakpoint is reached or a signal not related to stepping occurs before
-@var{count} steps, stepping stops right away.
-
-@item next
-@kindex next
-@kindex n
-Continue to the next source line in the current stack frame.  Similar to
-@code{step}, but any function calls appearing within the line of code
-are executed without stopping.  Execution stops when control reaches a
-different line of code at the stack level which was executing when the
-@code{next} command was given.  This command is abbreviated @code{n}.
-
-An argument is a repeat count, as in @code{step}.
-
-@code{next} within a function that lacks debugging information acts like
-@code{step}, but any function calls appearing within the code of the
-function are executed without stopping.
-
-@item finish
-@kindex finish
-Continue running until just after the selected stack frame returns (or
-until there is some other reason to stop, such as a fatal signal or a
-breakpoint).  Print the value returned by the selected stack frame (if
-any).
-
-Contrast this with the @code{return} command (@pxref{Returning}).
-
-@item until
-@kindex until
-@item u
-@kindex u
-Continue running until a source line past the current line, in the
-current stack frame, is reached.  This command is used to avoid single
-stepping through a loop more than once.  It is like the @code{next}
-command, except that when @code{until} encounters a jump, it
-automatically continues execution until the program counter is greater
-than the address of the jump.
-
-This means that when you reach the end of a loop after single stepping
-though it, @code{until} will cause the program to continue execution
-until the loop is exited.  In contrast, a @code{next} command at the end
-of a loop will simply step back to the beginning of the loop, which
-would force you to step through the next iteration.
-
-@code{until} always stops the program if it attempts to exit the current
-stack frame.
-
-@code{until} may produce somewhat counterintuitive results if the order
-of the source lines does not match the actual order of execution.  For
-example, in the following excerpt from a debugging session, the @code{f}
-(@code{frame}) command shows that execution is stopped at line
-@code{206}; yet when we use @code{until}, we get to line @code{195}:
-
-@example
-(_GDBP__) f
-#0  main (argc=4, argv=0xf7fffae8) at m4.c:206
-206                expand_input();
-(_GDBP__) until
-195            for ( ; argc > 0; NEXTARG) @{
-@end example
-
-In this case, (as for any C @code{for}-loop), the loop-step expression
-(here, @samp{argc > 0}) is executed @emph{after} the statements in the
-body of the loop, but is written before them.  Therefore, the
-@code{until} command appeared to step back to the beginning of the loop
-when it advanced to this expression.  However, it has not really gone to
-an earlier statement---not in terms of the actual machine code.
-
-@code{until} with no argument works by means of single
-instruction stepping, and hence is slower than @code{until} with an
-argument.
-
-@item until @var{location}
-@item u @var{location}
-Continue running the program until either the specified location is
-reached, or the current (innermost) stack frame returns.  @var{location}
-is any of the forms of argument acceptable to @code{break} (@pxref{Set
-Breaks}).  This form of the command uses breakpoints, and hence is
-quicker than @code{until} without an argument.
-
-@item stepi
-@itemx si
-@kindex stepi
-@kindex si
-Execute one machine instruction, then stop and return to the debugger.
-
-It is often useful to do @samp{display/i $pc} when stepping by machine
-instructions.  This will cause the next instruction to be executed to
-be displayed automatically at each stop.  @xref{Auto Display}.
-
-An argument is a repeat count, as in @code{step}.
-
-@item nexti
-@itemx ni
-@kindex nexti
-@kindex ni
-Execute one machine instruction, but if it is a function call,
-proceed until the function returns.
-
-An argument is a repeat count, as in @code{next}.
-@end table
-
-The @code{continue} command can be used after stepping to resume execution
-until the next breakpoint or signal.
-
-@node Continuing, Signals, Stepping, Stopping
-@section Continuing
-
-After your program stops, most likely you will want it to run some more if
-the bug you are looking for has not happened yet.
-
-@table @code
-@item continue
-@kindex continue
-Continue running the program at the place where it stopped.
-@end table
-
-If the program stopped at a breakpoint, the place to continue running
-is the address of the breakpoint.  You might expect that continuing would
-just stop at the same breakpoint immediately.  In fact, @code{continue}
-takes special care to prevent that from happening.  You do not need
-to disable the breakpoint to proceed through it after stopping there.
-You can, however, specify an ignore-count for the breakpoint that the
-program stopped at, by means of an argument to the @code{continue} command.
-@xref{Conditions}.
-
-If the program stopped because of a signal other than @code{SIGINT} or
-@code{SIGTRAP}, continuing will cause the program to see that signal.
-You may not want this to happen.  For example, if the program stopped
-due to some sort of memory reference error, you might store correct
-values into the erroneous variables and continue, hoping to see more
-execution; but the program would probably terminate immediately as
-a result of the fatal signal once it sees the signal.  To prevent this,
-you can continue with @samp{signal 0}.  @xref{Signaling}.  You can
-also act in advance to control what signals your program will see, using
-the @code{handle} command (@pxref{Signals}). 
-
-@node Signals,  , Continuing, Stopping
-@section Signals
-@cindex signals
-
-A signal is an asynchronous event that can happen in a program.  The
-operating system defines the possible kinds of signals, and gives each
-kind a name and a number.  For example, in Unix @code{SIGINT} is the
-signal a program gets when you type an interrupt (often @kbd{C-c});
-@code{SIGSEGV} is the signal a program gets from referencing a place in
-memory far away from all the areas in use; @code{SIGALRM} occurs when
-the alarm clock timer goes off (which happens only if the program has
-requested an alarm).
-
-@cindex fatal signals
-Some signals, including @code{SIGALRM}, are a normal part of the
-functioning of the program.  Others, such as @code{SIGSEGV}, indicate
-errors; these signals are @dfn{fatal} (kill the program immediately) if the
-program has not specified in advance some other way to handle the signal.
-@code{SIGINT} does not indicate an error in the program, but it is normally
-fatal so it can carry out the purpose of the interrupt: to kill the program.
-
-_GDBN__ has the ability to detect any occurrence of a signal in the program
-running under _GDBN__'s control.  You can tell _GDBN__ in advance what to do for
-each kind of signal.
-
-@cindex handling signals
-Normally, _GDBN__ is set up to ignore non-erroneous signals like @code{SIGALRM}
-(so as not to interfere with their role in the functioning of the program)
-but to stop the program immediately whenever an error signal happens.
-You can change these settings with the @code{handle} command.
-
-@table @code
-@item info signals
-@kindex info signals
-Print a table of all the kinds of signals and how _GDBN__ has been told to
-handle each one.  You can use this to see the signal numbers of all
-the defined types of signals.
-
-@item handle @var{signal} @var{keywords}@dots{}
-@kindex handle
-Change the way _GDBN__ handles signal @var{signal}.  @var{signal} can be the
-number of a signal or its name (with or without the @samp{SIG} at the
-beginning).  The @var{keywords} say what change to make.
-@end table
-
-@c @group
-The keywords allowed by the @code{handle} command can be abbreviated.
-Their full names are:
-
-@table @code
-@item nostop
-_GDBN__ should not stop the program when this signal happens.  It may
-still print a message telling you that the signal has come in.
-
-@item stop
-_GDBN__ should stop the program when this signal happens.  This implies
-the @code{print} keyword as well.
-
-@item print
-_GDBN__ should print a message when this signal happens.
-
-@item noprint
-_GDBN__ should not mention the occurrence of the signal at all.  This
-implies the @code{nostop} keyword as well.
-
-@item pass
-_GDBN__ should allow the program to see this signal; the program will be
-able to handle the signal, or may be terminated if the signal is fatal
-and not handled.
-
-@item nopass
-_GDBN__ should not allow the program to see this signal.
-@end table
-@c @end group
-
-When a signal has been set to stop the program, the program cannot see the
-signal until you continue.  It will see the signal then, if @code{pass} is
-in effect for the signal in question @i{at that time}.  In other words,
-after _GDBN__ reports a signal, you can use the @code{handle} command with
-@code{pass} or @code{nopass} to control whether that signal will be seen by
-the program when you later continue it.
-
-You can also use the @code{signal} command to prevent the program from
-seeing a signal, or cause it to see a signal it normally would not see,
-or to give it any signal at any time.  @xref{Signaling}.
-
index e257d31..e69de29 100755 (executable)
@@ -1,132 +0,0 @@
-_dnl__                                                         -*- Texinfo -*-
-_dnl__ Copyright (c) 1988 1989 1990 1991 Free Software Foundation, Inc.
-_dnl__ This file is part of the source for the GDB manual.
-@c M4 FRAGMENT: $Id$
-@node Symbols, Altering, Data, Top
-@chapter Examining the Symbol Table
-
-The commands described in this section allow you to inquire about the
-symbols (names of variables, functions and types) defined in your
-program.  This information is inherent in the text of your program and
-does not change as the program executes.  _GDBN__ finds it in your
-program's symbol table, in the file indicated when you started _GDBN__ 
-(@pxref{File Options}), or by one of the file-management commands
-(@pxref{Files}).
-
-@table @code
-@item info address @var{symbol}
-@kindex info address
-Describe where the data for @var{symbol} is stored.  For a register
-variable, this says which register it is kept in.  For a non-register
-local variable, this prints the stack-frame offset at which the variable
-is always stored.
-
-Note the contrast with @samp{print &@var{symbol}}, which does not work
-at all for a register variables, and for a stack local variable prints
-the exact address of the current instantiation of the variable.
-
-@item whatis @var{exp}
-@kindex whatis
-Print the data type of expression @var{exp}.  @var{exp} is not
-actually evaluated, and any side-effecting operations (such as
-assignments or function calls) inside it do not take place.
-@xref{Expressions}.
-
-@item whatis
-Print the data type of @code{$}, the last value in the value history.
-
-@item ptype @var{typename}
-@kindex ptype
-Print a description of data type @var{typename}.  @var{typename} may be
-the name of a type, or for C code it may have the form
-@samp{struct @var{struct-tag}}, @samp{union @var{union-tag}} or
-@samp{enum @var{enum-tag}}.@refill
-
-@item ptype @var{exp}
-Print a description of the type of expression @var{exp}.  @code{ptype}
-differs from @code{whatis} by printing a detailed description, instead of just
-the name of the type.  For example, if your program declares a variable
-as
-@example
-struct complex @{double real; double imag;@} v;
-@end example
-@noindent
-compare the output of the two commands:
-@example
-(_GDBP__) whatis v
-type = struct complex
-(_GDBP__) ptype v
-type = struct complex @{
-    double real;
-    double imag;
-@}
-@end example
-
-@item info types @var{regexp}
-@itemx info types
-@kindex info types 
-Print a brief description of all types whose name matches @var{regexp}
-(or all types in your program, if you supply no argument).  Each
-complete typename is matched as though it were a complete line; thus,
-@samp{i type value} gives information on all types in your program whose
-name includes the string @code{value}, but @samp{i type ^value$} gives
-information only on types whose complete name is @code{value}.
-
-This command differs from @code{ptype} in two ways: first, like
-@code{whatis}, it does not print a detailed description; second, it
-lists all source files where a type is defined.
-
-@item info source
-@kindex info source
-Show the name of the current source file---that is, the source file for
-the function containing the current point of execution.
-
-@item info sources
-@kindex info sources
-Print the names of all source files in the program for which there is
-debugging information, organized into two lists: those for which symbols
-have been read in, and those for which symbols will be read in on
-demand.
-@c FIXME: above passive AND awkward!
-
-@item info functions
-@kindex info functions
-Print the names and data types of all defined functions.
-
-@item info functions @var{regexp}
-Print the names and data types of all defined functions
-whose names contain a match for regular expression @var{regexp}.
-Thus, @samp{info fun step} finds all functions whose names
-include @code{step}; @samp{info fun ^step} finds those whose names
-start with @code{step}.
-
-@item info variables
-@kindex info variables
-Print the names and data types of all variables that are declared
-outside of functions (i.e., excluding local variables).
-
-@item info variables @var{regexp}
-Print the names and data types of all variables (except for local
-variables) whose names contain a match for regular expression
-@var{regexp}.
-
-
-@ignore
-This was never implemented.
-@item info methods
-@itemx info methods @var{regexp}
-@kindex info methods
-The @code{info methods} command permits the user to examine all defined
-methods within C++ program, or (with the @var{regexp} argument) a
-specific set of methods found in the various C++ classes.  Many
-C++ classes provide a large number of methods.  Thus, the output
-from the @code{ptype} command can be overwhelming and hard to use.  The
-@code{info-methods} command filters the methods, printing only those
-which match the regular-expression @var{regexp}.
-@end ignore
-
-@item printsyms @var{filename}
-@kindex printsyms
-Write a complete dump of the debugger's symbol data into the
-file @var{filename}.
-@end table
index f3bee50..e69de29 100755 (executable)
@@ -1,192 +0,0 @@
-_dnl__                                                         -*- Texinfo -*-
-_dnl__ Copyright (c) 1988 1989 1990 1991 Free Software Foundation, Inc.
-_dnl__ This file is part of the source for the GDB manual.
-@c M4 FRAGMENT: $Id$
-@node     Targets, Controlling _GDBN__, _GDBN__ Files, Top
-@chapter Specifying a Debugging Target 
-@cindex debugging target
-@kindex target
-A @dfn{target} is an interface between the debugger and a particular 
-kind of file or process.  
-
-Often, you will be able to run _GDBN__ in the same host environment as the
-program you are debugging; in that case, the debugging target can just be
-specified as a side effect of the @code{file} or @code{core} commands.
-When you need more flexibility---for example, running _GDBN__ on a
-physically separate host, controlling standalone systems over a
-serial port, or realtime systems over a TCP/IP connection---you can use
-the @code{target} command.
-
-@menu
-* Active Targets::             Active Targets
-* Target Commands::            Commands for Managing Targets
-* Remote::                     Remote Debugging
-@end menu
-
-@node Active Targets, Target Commands, Targets, Targets
-@section Active Targets
-@cindex stacking targets
-@cindex active targets
-@cindex multiple targets
-
-Targets are managed in three @dfn{strata} that correspond to different
-classes of target: processes, core files, and executable files.  This
-allows you to (for example) start a process and inspect its activity
-without abandoning your work on a core file.
-
-More than one target can potentially respond to a request.  In
-particular, when you access memory _GDBN__ will examine the three strata of
-targets until it finds a target that can handle that particular address.
-Strata are always examined in a fixed order: first a process if there is
-one, then a core file if there is one, and finally an executable file if
-there is one of those.
-
-When you specify a new target in a given stratum, it replaces any target
-previously in that stratum.
-
-To get rid of a target without replacing it, use the @code{detach}
-command.  The related command @code{attach} provides you with a way of
-choosing a particular running process as a new target. @xref{Attach}.
-
-@node Target Commands, Remote, Active Targets, Targets
-@section Commands for Managing Targets
-
-@table @code
-@item target @var{type} @var{parameters}
-Connects the _GDBN__ host environment to a target machine or process.  A
-target is typically a protocol for talking to debugging facilities.  You
-use the argument @var{type} to specify the type or protocol of the
-target machine.
-
-Further @var{parameters} are interpreted by the target protocol, but
-typically include things like device names or host names to connect
-with, process numbers, and baud rates.  
-
-The @code{target} command will not repeat if you press @key{RET} again
-after executing the command.
-
-@item help target
-@kindex help target
-Displays the names of all targets available.  To display targets
-currently selected, use either @code{info target} or @code{info files}
-(@pxref{Files}).
-
-@item help target @var{name}
-Describe a particular target, including any parameters necessary to
-select it.
-@end table
-
-Here are some common targets (available, or not, depending on the _GDBN__
-configuration):
-
-@table @code
-@item target exec @var{prog}
-@kindex target exec
-An executable file.  @samp{target exec @var{prog}} is the same as
-@samp{exec-file @var{prog}}.
-
-@item target core @var{filename}
-@kindex target core
-A core dump file.  @samp{target core @var{filename}} is the same as
-@samp{core-file @var{filename}}.
-
-@item target remote @var{dev}
-@kindex target remote
-Remote serial target in _GDBN__-specific protocol.  The argument @var{dev}
-specifies what serial device to use for the connection (e.g.
-@file{/dev/ttya}). @xref{Remote}.
-
-_if__(_AMD29K__)
-@item target amd-eb @var{dev} @var{speed} @var{PROG}
-@kindex target amd-eb
-@cindex AMD EB29K
-Remote PC-resident AMD EB29K board, attached over serial lines.
-@var{dev} is the serial device, as for @code{target remote};
-@var{speed} allows you to specify the linespeed; and @var{PROG} is the
-name of the program to be debugged, as it appears to DOS on the PC.
-@xref{EB29K Remote}.
-
-_fi__(_AMD29K__)
-_if__(_I960__)
-@item target nindy @var{devicename}
-@kindex target nindy
-An Intel 960 board controlled by a Nindy Monitor.  @var{devicename} is
-the name of the serial device to use for the connection, e.g.
-@file{/dev/ttya}.  @xref{i960-Nindy Remote}.
-
-_fi__(_I960__)
-_if__(_VXWORKS__)
-@item target vxworks @var{machinename}
-@kindex target vxworks
-A VxWorks system, attached via TCP/IP.  The argument @var{machinename}
-is the target system's machine name or IP address.
-@xref{VxWorks Remote}.
-_fi__(_VXWORKS__)
-@end table
-
-_if__(_GENERIC__)
-Different targets are available on different configurations of _GDBN__; your
-configuration may have more or fewer targets.
-_fi__(_GENERIC__)
-
-@node Remote,  , Target Commands, Targets
-@section Remote Debugging
-@cindex remote debugging
-
-_if__(_GENERIC__)
-@menu
-_include__(gdb.inv.m-m4)<>_dnl__
-@end menu
-_fi__(_GENERIC__)
-
-If you are trying to debug a program running on a machine that can't run
-_GDBN__ in the usual way, it is often useful to use remote debugging.  For
-example, you might use remote debugging on an operating system kernel, or on
-a small system which does not have a general purpose operating system
-powerful enough to run a full-featured debugger.  
-
-Some configurations of _GDBN__ have special serial or TCP/IP interfaces
-to make this work with particular debugging targets.  In addition,
-_GDBN__ comes with a generic serial protocol (specific to _GDBN__, but
-not specific to any particular target system) which you can use if you
-write the remote stubs---the code that will run on the remote system to
-communicate with _GDBN__.
-
-To use the _GDBN__ remote serial protocol, the program to be debugged on
-the remote machine needs to contain a debugging stub which talks to
-_GDBN__ over the serial line.  Several working remote stubs are
-distributed with _GDBN__; see the @file{README} file in the _GDBN__
-distribution for more information.
-
-For details of this communication protocol, see the comments in the
-_GDBN__ source file @file{remote.c}.
-
-To start remote debugging, first run _GDBN__ and specify as an executable file
-the program that is running in the remote machine.  This tells _GDBN__ how
-to find the program's symbols and the contents of its pure text.  Then
-establish communication using the @code{target remote} command with a device
-name as an argument.  For example:
-
-@example
-target remote /dev/ttyb
-@end example
-
-@noindent
-if the serial line is connected to the device named @file{/dev/ttyb}.  This
-will stop the remote machine if it is not already stopped.
-
-Now you can use all the usual commands to examine and change data and to
-step and continue the remote program.
-
-To resume the remote program and stop debugging it, use the @code{detach}
-command.
-
-Other remote targets may be available in your
-configuration of _GDBN__; use @code{help targets} to list them.  
-
-_if__(_GENERIC__)
-_include__(gdb.inv.s-m4)
-@c Text on starting up GDB in various specific cases; it goes up front
-@c in manuals configured for any of those particular situations, here
-@c otherwise. 
-_fi__(_GENERIC__)
index f17e305..e69de29 100755 (executable)
@@ -1,451 +0,0 @@
-_dnl__                                                         -*- Texinfo -*-
-_dnl__ Copyright (c) 1988 1989 1990 1991 Free Software Foundation, Inc.
-_dnl__ This file is part of the source for the GDB manual.
-@c M4 FRAGMENT: $Id$
-@c
-@syncodeindex ky cp
-@c FOR UPDATES LEADING TO THIS DRAFT, GDB CHANGELOG CONSULTED BETWEEN:
-@c Sun May 19 05:36:59 1991  John Gilmore  (gnu at cygint.cygnus.com)
-@c Sat Dec 22 02:51:40 1990  John Gilmore  (gnu at cygint)
-@ifinfo
-This file documents the GNU debugger _GDBN__.
-
-Copyright (C) 1988, 1989, 1990, 1991 Free Software Foundation, Inc.
-
-Permission is granted to make and distribute verbatim copies of
-this manual provided the copyright notice and this permission notice
-are preserved on all copies.
-
-@ignore
-Permission is granted to process this file through TeX and print the
-results, provided the printed document carries copying permission
-notice identical to this one except for the removal of this paragraph
-(this paragraph not being relevant to the printed manual).
-
-@end ignore
-Permission is granted to copy and distribute modified versions of this
-manual under the conditions for verbatim copying, provided also that the
-section entitled ``GNU General Public License'' is included exactly as
-in the original, and provided that the entire resulting derived work is
-distributed under the terms of a permission notice identical to this
-one.
-
-Permission is granted to copy and distribute translations of this manual
-into another language, under the above conditions for modified versions,
-except that the section entitled ``GNU General Public License'' may be
-included in a translation approved by the Free Software Foundation
-instead of in the original English.
-@end ifinfo
-@smallbook
-@setchapternewpage odd
-_if__(_GENERIC__)
-@settitle Using _GDBN__ (v4.0)
-_fi__(_GENERIC__)
-_if__(!_GENERIC__)
-@settitle Using _GDBN__ v4.0 (_HOST__)
-_fi__(!_GENERIC__)
-@iftex
-@finalout
-@end iftex
-@titlepage
-@title{Using _GDBN__}
-@subtitle{A Guide to the GNU Source-Level Debugger}
-_if__(!_GENERIC__)
-@subtitle{On _HOST__ Systems}
-_fi__(!_GENERIC__)
-@sp 1
-@c Maybe crank this up to "Fourth Edition" when released at FSF
-@c @subtitle Third Edition---_GDBN__ version 4.0
-@subtitle _GDBN__ version 4.0
-@subtitle May 1991
-@author{Richard M. Stallman@qquad @hfill Free Software Foundation}
-@author{Roland H. Pesch@qquad @hfill Cygnus Support}
-@page
-@tex
-{\parskip=0pt
-\hfill rms\@ai.mit.edu, pesch\@cygnus.com\par
-\hfill {\it Using _GDBN__}, \manvers\par
-\hfill \TeX{}info \texinfoversion\par
-}
-@end tex
-
-@vskip 0pt plus 1filll
-Copyright @copyright{} 1988, 1989, 1990, 1991 Free Software Foundation, Inc.
-
-Permission is granted to make and distribute verbatim copies of
-this manual provided the copyright notice and this permission notice
-are preserved on all copies.
-
-Permission is granted to copy and distribute modified versions of this
-manual under the conditions for verbatim copying, provided also that the
-section entitled ``GNU General Public License'' is included exactly as
-in the original, and provided that the entire resulting derived work is
-distributed under the terms of a permission notice identical to this
-one.
-
-Permission is granted to copy and distribute translations of this manual
-into another language, under the above conditions for modified versions,
-except that the section entitled ``GNU General Public License'' may be
-included in a translation approved by the Free Software Foundation
-instead of in the original English.
-@end titlepage
-@page
-
-@node Top, Summary, (dir), (dir)
-@ifinfo
-This file describes version 4.0 of GDB, the GNU symbolic debugger.
-@end ifinfo
-
-@menu
-* Summary::                    Summary of _GDBN__
-* New Features::               New Features in _GDBN__ version 4.0
-* Sample Session::             A Sample _GDBN__ Session
-* Invocation::                 Getting In and Out of _GDBN__
-* Commands::                   
-* Running::                    Running Programs Under _GDBN__
-* Stopping::                   Stopping and Continuing
-* Stack::                      Examining the Stack
-* Source::                     Examining Source Files
-* Data::                       Examining Data
-* Symbols::                    Examining the Symbol Table
-* Altering::                   Altering Execution
-* _GDBN__ Files::              
-* Targets::                    Specifying a Debugging Target 
-* Controlling _GDBN__::                Controlling _GDBN__
-* Sequences::                  Canned Sequences of Commands
-* Emacs::                      Using _GDBN__ under GNU Emacs
-* _GDBN__ Bugs::                       Reporting Bugs in _GDBN__
-* Renamed Commands::           
-* Installing _GDBN__::         Installing _GDBN__
-* Copying::                    GNU GENERAL PUBLIC LICENSE
-* Index::                      Index
- --- The Detailed Node Listing ---
-
-Summary of _GDBN__
-
-* Free Software::              Free Software
-* Contributors::               Contributors to _GDBN__
-
-Getting In and Out of _GDBN__
-
-* Starting _GDBN__::           Starting _GDBN__
-* Leaving _GDBN__::                    Leaving _GDBN__
-* Shell Commands::             Shell Commands
-
-Starting _GDBN__
-
-* File Options::               Choosing Files
-* Mode Options::               Choosing Modes
-
-_GDBN__ Commands
-
-* Command Syntax::             Command Syntax
-* Help::                       Getting Help
-
-Running Programs Under _GDBN__
-
-* Compilation::                        Compiling for Debugging
-* Starting::                   Starting your Program
-* Arguments::                  Your Program's Arguments
-* Environment::                        Your Program's Environment
-* Working Directory::          Your Program's Working Directory
-* Input/Output::               Your Program's Input and Output
-* Attach::                     Debugging an Already-Running Process
-* Kill Process::               Killing the Child Process
-
-Stopping and Continuing
-
-* Breakpoints::                        Breakpoints, Watchpoints, and Exceptions
-* Stepping::                   Stepping
-* Continuing::                 Continuing
-* Signals::                    Signals
-
-Breakpoints, Watchpoints, and Exceptions
-
-* Set Breaks::                 Setting Breakpoints
-* Set Watchpoints::            Setting Watchpoints
-* Exception Handling::         Breakpoints and Exceptions
-* Delete Breaks::              Deleting Breakpoints
-* Disabling::                  Disabling Breakpoints
-* Conditions::                 Break Conditions
-* Break Commands::             Breakpoint Command Lists
-* Breakpoint Menus::           Breakpoint Menus
-* Error in Breakpoints::       
-
-Examining the Stack
-
-* Frames::                     Stack Frames
-* Backtrace::                  Backtraces
-* Selection::                  Selecting a Frame
-* Frame Info::                 Information on a Frame
-
-Examining Source Files
-
-* List::                       Printing Source Lines
-* Search::                     Searching Source Files
-* Source Path::                        Specifying Source Directories
-* Machine Code::               Source and Machine Code
-
-Examining Data
-
-* Expressions::                        Expressions
-* Variables::                  Program Variables
-* Arrays::                     Artificial Arrays
-* Output formats::             Output formats
-* Memory::                     Examining Memory
-* Auto Display::               Automatic Display
-* Print Settings::             Print Settings
-* Value History::              Value History
-* Convenience Vars::           Convenience Variables
-* Registers::                  Registers
-* Floating Point Hardware::    Floating Point Hardware
-
-Altering Execution
-
-* Assignment::                 Assignment to Variables
-* Jumping::                    Continuing at a Different Address
-* Signaling::                  Giving the Program a Signal
-* Returning::                  Returning from a Function
-* Calling::                    Calling your Program's Functions
-
-_GDBN__'s Files
-
-* Files::                      Commands to Specify Files
-* Symbol Errors::              Errors Reading Symbol Files
-
-Specifying a Debugging Target 
-
-* Active Targets::             Active Targets
-* Target Commands::            Commands for Managing Targets
-* Remote::                     Remote Debugging
-
-Remote Debugging
-
-* i960-Nindy Remote::          
-* EB29K Remote::               
-* VxWorks Remote::             
-
-_GDBN__ with a Remote i960 (Nindy)
-
-* Nindy Startup::              Startup with Nindy
-* Nindy Options::              Options for Nindy
-* Nindy reset::                        Nindy Reset Command
-
-_GDBN__ with a Remote EB29K
-
-* Comms (EB29K)::              Communications Setup
-* gdb-EB29K::                  EB29K cross-debugging
-* Remote Log::                 Remote Log
-
-_GDBN__ and VxWorks
-
-* VxWorks connection::         Connecting to VxWorks
-* VxWorks download::           VxWorks Download
-* VxWorks attach::             Running Tasks
-
-Controlling _GDBN__
-
-* Prompt::                     Prompt
-* Editing::                    Command Editing
-* History::                    Command History
-* Screen Size::                        Screen Size
-* Numbers::                    Numbers
-* Messages/Warnings::          Optional Warnings and Messages
-
-Canned Sequences of Commands
-
-* Define::                     User-Defined Commands
-* Command Files::              Command Files
-* Output::                     Commands for Controlled Output
-
-Reporting Bugs in _GDBN__
-
-* Bug Criteria::               Have You Found a Bug?
-* Bug Reporting::              How to Report Bugs
-@end menu
-
-@node Summary, New Features, Top, Top
-@unnumbered Summary of _GDBN__
-
-The purpose of a debugger such as _GDBN__ is to allow you to see what is
-going on ``inside'' another program while it executes---or what another
-program was doing at the moment it crashed.  
-
-_GDBN__ can do four main kinds of things (plus other things in support of
-these) to help you catch bugs in the act:
-
-@itemize @bullet
-@item
-Start your program, specifying anything that might affect its behavior.
-
-@item
-Make your program stop on specified conditions.
-
-@item
-Examine what has happened, when your program has stopped.
-
-@item
-Change things in your program, so you can experiment with correcting the
-effects of one bug and go on to learn about another.
-@end itemize
-
-_GDBN__ can be used to debug programs written in C and C++.  Pascal support
-is being implemented, and Fortran support will be added when a GNU
-Fortran compiler is ready.
-
-@menu
-* Free Software::              Free Software
-* Contributors::               Contributors to GDB
-@end menu
-
-@node Free Software, Contributors, Summary, Summary
-@unnumberedsec Free Software
-_GDBN__ is @dfn{free software}, protected by the GNU General Public License (GPL).
-The GPL gives you the freedom to copy or adapt a licensed
-program---but every person getting a copy also gets with it the
-freedom to modify that copy (which means that they must get access to
-the source code), and the freedom to distribute further copies.
-Typical software companies use copyrights to limit your freedoms; the
-Free Software Foundation uses the GPL to preserve these freedoms.
-
-Fundamentally, the General Public License is a license which says that
-you have these freedoms and that you can't take these freedoms away
-from anyone else.
-
-@c FIXME: (passim) go through all xrefs, expanding to use text headings
-For full details, @pxref{Copying}.
-@node Contributors,  , Free Software, Summary
-@unnumberedsec Contributors to GDB
-
-Richard Stallman was the original author of GDB, as with many GNU
-programs.  Many others have contributed to its development.  This
-section attempts to credit major contributors.  One of the virtues of
-free software is that everyone is free to contribute to it; with
-regret, we cannot actually acknowledge everyone here.  The file
-@file{ChangeLog} in the GDB distribution approximates a blow-by-blow
-account.
-
-Changes much prior to version 2.0 are lost in the mists of time.
-
-@quotation
-@emph{Plea:} Additions to this section are particularly welcome.  If you
-or your friends (or enemies; let's be evenhanded) have been unfairly
-omitted from this list, we would like to add your names!
-@end quotation
-
-So that they may not regard their long labor as thankless, we
-particularly thank those who shepherded GDB through major releases:
-John Gilmore (release 4.0); Jim Kingdon (releases 3.9, 3.5, 3.4, 3.3);
-and Randy Smith (releases 3.2, 3.1, 3.0).  As major maintainer of GDB
-for some period, each contributed significantly to the structure,
-stability, and capabilities of the entire debugger.
-
-Richard Stallman, assisted at various times by Pete TerMaat, Chris
-Hanson, and Richard Mlynarik, handled releases through 2.8.
-
-Michael Tiemann is the author of most of the GNU C++ support in GDB,
-with significant additional contributions from Per Bothner.  James
-Clark wrote the GNU C++ demangler.  Early work on C++ was by Peter
-TerMaat (who also did much general update work leading to release 3.0).
-
-GDB 4.0 uses the BFD subroutine library to examine multiple
-object-file formats; BFD was a joint project of V. Gumby
-Henkel-Wallace, Rich Pixley, Steve Chamberlain, and John Gilmore.
-
-David Johnson wrote the original COFF support; Pace Willison did
-the original support for encapsulated COFF.
-
-Adam de Boor and Bradley Davis contributed the ISI Optimum V support.
-Per Bothner, Noboyuki Hikichi, and Alessandro Forin contributed MIPS
-support.  Jean-Daniel Fekete contributed Sun 386i support.  Chris
-Hanson improved the HP9000 support.  Noboyuki Hikichi and Tomoyuki
-Hasei contributed Sony/News OS 3 support.  David Johnson contributed
-Encore Umax support.  Jyrki Kuoppala contributed Altos 3068 support.
-Keith Packard contributed NS32K support.  Doug Rabson contributed
-Acorn Risc Machine support.  Chris Smith contributed Convex support
-(and Fortran debugging).  Jonathan Stone contributed Pyramid support.
-Michael Tiemann contributed SPARC support.  Tim Tucker contributed
-support for the Gould NP1 and Gould Powernode.  Pace Willison
-contributed Intel 386 support.  Jay Vosburgh contributed Symmetry
-support.
-
-Rich Schaefer helped with support of SunOS shared libraries.
-
-Jay Fenlason and Roland McGrath ensured that GDB and GAS agree about
-several machine instruction sets.
-
-Patrick Duval, Ted Goldstein, Vikram Koka and Glenn Engel helped
-develop remote debugging.  Intel Corporation and Wind River Systems
-contributed remote debugging modules for their products.
-
-Brian Fox is the author of the readline libraries providing
-command-line editing and command history.
-
-@node New Features, Sample Session, Summary, Top
-@unnumbered New Features since _GDBN__ version 3.5
-
-@table @emph
-@item Targets
-Using the new command @code{target}, you can select at runtime whether
-you are debugging local files, local processes, standalone systems over
-a serial port, realtime systems over a TCP/IP connection, etc.
-Internally, _GDBN__ now uses a function vector to mediate access to
-different targets; if you need to add your own support for a remote
-protocol, this makes it much easier.
-
-@item Watchpoints
-_GDBN__ now sports watchpoints as well as breakpoints.  You can use a
-watchpoint to stop execution whenever the value of an expression
-changes, without having to predict a particular place in your program
-where this may happen.
-
-@item Object Code Formats
-_GDBN__ uses a new scheme called Binary File Descriptors (BFD) to permit
-it to switch dynamically, without reconfiguration or recompilation,
-between different object-file formats.  Formats currently supported are
-COFF, a.out, and the Intel 960 b.out; files may be read as .o's, archive
-libraries, or core dumps.  BFD is available as a subroutine library so
-that other programs may take advantage of it, and the other GNU binary
-utilities are being converted to use it.
-
-@item Configuration
-Compile-time configuration (to select a particular architecture and
-operating system) is much easier.  The script @code{config.gdb} now
-handles specification of separate host and target configurations.
-
-@item Interaction
-The user interface to _GDBN__'s control variables has been simplified
-and consolidated in two commands, @code{set} and @code{show}.  Output
-lines are now broken at readable places, rather than overflowing onto
-the next line.  You can suppress output of machine-level addresses,
-displaying only source language information.
-
-
-@item Source Language
-_GDBN__ now has limited support for C++ exception handling: _GDBN__ can
-break when an exception is raised, before the stack is peeled back to
-the exception handler's context.  
-
-@item Command Rationalization
-Many _GDBN__ commands have been renamed to make them easier to remember
-and use.  In particular, the subcommands of @code{info} and
-@code{show}/@code{set} are grouped to make the former refer to the state
-of your program, and the latter refer to the state of _GDBN__ itself.
-@xref{Renamed Commands}, for details on what commands were renamed.
-
-@item Ports
-_GDBN__ has been ported to the following new architectures: AT&T 3b1,
-Acorn RISC machine, HP300 running HPUX, big- and little-endian MIPS
-machines, Motorola 88k, Sun 386i, and Sun 3 running SunOS 4.  In
-addition, the following are supported as targets only: AMD 29k, Intel
-960, and Wind River's VxWorks.
-
-@item Shared Libraries
-_GDBN__ 4.0 supports SunOS shared libraries.
-
-@item Work in Progress
-Kernel debugging for BSD and Mach systems; Tahoe and HPPA architecture
-support.
-
-@end table
-
index 8fe5f91..e69de29 100755 (executable)
@@ -1,13 +0,0 @@
-_dnl__                                                         -*- Texinfo -*-
-_dnl__ Copyright (c) 1991 Free Software Foundation, Inc.
-_dnl__ This file is part of the source for the GDB manual.
-_dnl__ M4 FRAGMENT: $Id$
-_if__(_I960__)
-* i960-Nindy Remote::          _GDBN__ with a Remote i960 (Nindy)
-_fi__(_I960__)
-_if__(_AMD29K__)
-* EB29K Remote::               _GDBN__ with a Remote EB29K
-_fi__(_AMD29K__)
-_if__(_VXWORKS__)
-* VxWorks Remote::             _GDBN__ and VxWorks
-_fi__(_VXWORKS__)
index e0814be..e69de29 100755 (executable)
@@ -1,427 +0,0 @@
-_dnl__                                                         -*- Texinfo -*-
-_dnl__ Copyright (c) 1990 1991 Free Software Foundation, Inc.
-_dnl__ This file is part of the source for the GDB manual.
-@c M4 FRAGMENT $Id$
-@c This text diverted to "Remote Debugging" section in general case;
-@c however, if we're doing a manual specifically for one of these, it
-@c belongs up front (in "Getting In and Out" chapter).
-_if__(_I960__)
-_if__(!_GENERIC__)
-@node i960-Nindy Remote, EB29K Remote, Mode Options, Starting _GDBN__
-_fi__(!_GENERIC__)
-_if__(_GENERIC__)
-@node i960-Nindy Remote, EB29K Remote, Remote, Remote
-_fi__(_GENERIC__)
-@subsection _GDBN__ with a Remote i960 (Nindy)
-
-@cindex Nindy
-@cindex i960
-@dfn{Nindy} is a ROM Monitor program for Intel 960 target systems.  When
-_GDBN__ is configured to control a remote Intel 960 using Nindy, you can
-tell _GDBN__ how to connect to the 960 in several ways:
-
-@itemize @bullet
-@item
-Through command line options specifying serial port, version of the
-Nindy protocol, and communications speed;
-
-@item
-By responding to a prompt on startup;
-
-@item
-By using the @code{target} command at any point during your _GDBN__
-session.  @xref{Target Commands}.
-
-@end itemize
-
-@menu
-* Nindy Startup::               Startup with Nindy
-* Nindy Options::               Options for Nindy
-* Nindy reset::                 Nindy Reset Command
-@end menu
-
-@node Nindy Startup, Nindy Options, i960-Nindy Remote, i960-Nindy Remote
-@subsubsection Startup with Nindy
-
-If you simply start @code{_GDBN__} without using any command-line
-options, you are prompted for what serial port to use, @emph{before} you
-reach the ordinary _GDBN__ prompt:
-@example
-Attach /dev/ttyNN -- specify NN, or "quit" to quit:  
-@end example
-@noindent
-Respond to the prompt with whatever suffix (after @samp{/dev/tty})
-identifies the serial port you want to use.  You can, if you choose,
-simply start up with no Nindy connection by responding to the prompt
-with an empty line.  If you do this, and later wish to attach to Nindy,
-use @code{target} (@pxref{Target Commands}).
-
-@node Nindy Options, Nindy reset, Nindy Startup, i960-Nindy Remote
-@subsubsection Options for Nindy
-
-These are the startup options for beginning your _GDBN__ session with a
-Nindy-960 board attached:
-
-@table @code
-@item -r @var{port}
-Specify the serial port name of a serial interface to be used to connect
-to the target system.  This option is only available when _GDBN__ is
-configured for the Intel 960 target architecture.  You may specify
-@var{port} as any of: a full pathname (e.g. @samp{-r /dev/ttya}), a
-device name in @file{/dev} (e.g. @samp{-r ttya}), or simply the unique
-suffix for a specific @code{tty} (e.g. @samp{-r a}).
-
-@item -O
-(An uppercase letter ``O'', not a zero.)  Specify that _GDBN__ should use
-the ``old'' Nindy monitor protocol to connect to the target system.
-This option is only available when _GDBN__ is configured for the Intel 960
-target architecture.
-
-@quotation
-@emph{Warning:} if you specify @samp{-O}, but are actually trying to
-connect to a target system that expects the newer protocol, the connection
-will fail, appearing to be a speed mismatch.  _GDBN__ will repeatedly
-attempt to reconnect at several different line speeds.  You can abort
-this process with an interrupt.
-@end quotation
-
-@item -brk
-Specify that _GDBN__ should first send a @code{BREAK} signal to the target
-system, in an attempt to reset it, before connecting to a Nindy target.
-
-@quotation
-@emph{Warning:} Many target systems do not have the hardware that this
-requires; it only works with a few boards.
-@end quotation
-
-@end table
-
-The standard @samp{-b} option controls the line speed used on the serial
-port. 
-
-@node Nindy reset,  , Nindy Options, i960-Nindy Remote
-@c @group
-@subsubsection Nindy Reset Command
-@table @code
-@item reset
-@kindex reset
-For a Nindy target, this command sends a ``break'' to the remote target
-system; this is only useful if the target has been equipped with a
-circuit to perform a hard reset (or some other interesting action) when
-a break is detected.
-@end table
-@c @end group
-_fi__(_I960__)
-
-_if__(_AMD29K__)
-_if__(!_GENERIC__)
-@node EB29K Remote, VxWorks Remote, i960-Nindy Remote, Starting _GDBN__
-_fi__(!_GENERIC__)
-_if__(_GENERIC__)
-@node EB29K Remote, VxWorks Remote, i960-Nindy Remote, Remote
-_fi__(_GENERIC__)
-@subsection _GDBN__ with a Remote EB29K
-
-@cindex EB29K board
-@cindex running 29K programs
-
-To use _GDBN__ from a Unix system to run programs on AMD's EB29K
-board in a PC, you must first connect a serial cable between the PC
-and a serial port on the Unix system.  In the following, we assume
-you've hooked the cable between the PC's @file{COM1} port and
-@file{/dev/ttya} on the Unix system.
-
-@menu
-* Comms (EB29K)::               Communications Setup
-* _GDBP__-EB29K::                   EB29K cross-debugging
-* Remote Log::                  Remote Log
-@end menu
-
-@node Comms (EB29K), _GDBP__-EB29K, EB29K Remote, EB29K Remote
-@subsubsection Communications Setup
-The next step is to set up the PC's port, by doing something like the
-following in DOS on the PC:
-_0__@example
-C:\> MODE com1:9600,n,8,1,none
-_1__@end example
-@noindent
-This example---run on an MS DOS 4.0 system---sets the PC port to 9600
-bps, no parity, eight data bits, one stop bit, and no ``retry'' action;
-you must match the communications parameters when establishing the Unix
-end of the connection as well.
-@c FIXME: Who knows what this "no retry action" crud from the DOS manual may
-@c       mean?  It's optional; leave it out? ---pesch@cygnus.com, 25feb91 
-
-To give control of the PC to the Unix side of the serial line, type
-the following at the DOS console:
-_0__@example
-C:\> CTTY com1
-_1__@end example
-@noindent
-(Later, if you wish to return control to the DOS console, you can use
-the command @code{CTTY con}---but you must send it over the device that
-had control, in our example over the @file{COM1} serial line).
-
-From the Unix host, use a communications program such as @code{tip} or
-@code{cu} to communicate with the PC; for example,
-@example
-cu -s 9600 -l /dev/ttya
-@end example
-@noindent
-The @code{cu} options shown specify, respectively, the linespeed and the
-serial port to use.  If you use @code{tip} instead, your command line
-may look something like the following:
-@example
-tip -9600 /dev/ttya
-@end example
-@noindent
-Your system may define a different name where our example uses
-@file{/dev/ttya} as the argument to @code{tip}.  The communications
-parameters, including what port to use, are associated with the
-@code{tip} argument in the ``remote'' descriptions file---normally the
-system table @file{/etc/remote}.
-@c FIXME: What if anything needs doing to match the "n,8,1,none" part of
-@c the DOS side's comms setup?  cu can support -o (odd
-@c parity), -e (even parity)---apparently no settings for no parity or
-@c for character size.  Taken from stty maybe...?  John points out tip
-@c can set these as internal variables, eg ~s parity=none; man stty
-@c suggests that it *might* work to stty these options with stdin or
-@c stdout redirected... ---pesch@cygnus.com, 25feb91
-
-@kindex EBMON
-Using the @code{tip} or @code{cu} connection, change the DOS working
-directory to the directory containing a copy of your 29K program, then
-start the PC program @code{EBMON} (an EB29K control program supplied
-with your board by AMD).  You should see an initial display from
-@code{EBMON} similar to the one that follows, ending with the
-@code{EBMON} prompt @samp{#}---
-_0__@example
-C:\> G:
-
-G:\> CD \usr\joe\work29k
-
-G:\USR\JOE\WORK29K> EBMON
-Am29000 PC Coprocessor Board Monitor, version 3.0-18
-Copyright 1990 Advanced Micro Devices, Inc.
-Written by Gibbons and Associates, Inc.
-
-Enter '?' or 'H' for help
-
-PC Coprocessor Type   = EB29K
-I/O Base              = 0x208
-Memory Base           = 0xd0000
-
-Data Memory Size      = 2048KB
-Available I-RAM Range = 0x8000 to 0x1fffff
-Available D-RAM Range = 0x80002000 to 0x801fffff
-
-PageSize              = 0x400
-Register Stack Size   = 0x800
-Memory Stack Size     = 0x1800
-
-CPU PRL               = 0x3
-Am29027 Available     = No
-Byte Write Available  = Yes
-
-# ~.
-_1__@end example
-
-Then exit the @code{cu} or @code{tip} program (done in the example by
-typing @code{~.} at the @code{EBMON} prompt).  @code{EBMON} will keep
-running, ready for _GDBN__ to take over.
-
-For this example, we've assumed what is probably the most convenient
-way to make sure the same 29K program is on both the PC and the Unix
-system: a PC/NFS connection that establishes ``drive @code{G:}'' on the
-PC as a file system on the Unix host.  If you don't have PC/NFS or
-something similar connecting the two systems, you must arrange some
-other way---perhaps floppy-disk transfer---of getting the 29K program
-from the Unix system to the PC; _GDBN__ will @emph{not} download it over the
-serial line.
-
-@node _GDBP__-EB29K, Remote Log, Comms (EB29K), EB29K Remote
-@subsubsection EB29K cross-debugging
-Finally, @code{cd} to the directory containing an image of your 29K
-program on the Unix system, and start _GDBN__---specifying as argument the
-name of your 29K program:
-@example
-cd /usr/joe/work29k
-_GDBP__ myfoo
-@end example
-Now you can use the @code{target} command:
-@example
-target amd-eb /dev/ttya 9600 MYFOO
-@end example
-@c FIXME: test above 'target amd-eb' as spelled, with caps!  caps are meant to
-@c emphasize that this is the name as seen by DOS (since I think DOS is
-@c single-minded about case of letters).  ---pesch@cygnus.com, 25feb91
-
-@noindent
-In this example, we've assumed your program is in a file called
-@file{myfoo}.  Note that the filename given as the last argument to
-@code{target amd-eb} should be the name of the program as it appears to DOS.
-In our example this is simply @code{MYFOO}, but in general it can include
-a DOS path, and depending on your transfer mechanism may not resemble
-the name on the Unix side.
-
-At this point, you can set any breakpoints you wish; when you're ready
-to see your program run on the 29K board, use the _GDBN__ command
-@code{run}.
-
-To stop debugging the remote program, use the _GDBN__ @code{detach}
-command.  
-
-To return control of the PC to its console, use @code{tip} or @code{cu}
-once again, after your _GDBN__ session has concluded, to attach to
-@code{EBMON}.  You can then type the command @code{q} to shut down
-@code{EBMON}, returning control to the DOS command-line interpreter.
-Type @code{CTTY con} to return command input to the main DOS console,
-and type @kbd{~.} to leave @code{tip} or @code{cu}.
-
-@node Remote Log,  , _GDBP__-EB29K, EB29K Remote
-@subsubsection Remote Log
-@kindex eb.log
-@cindex log file for EB29K
-The @code{target amd-eb} command creates a file @file{eb.log} in the
-current working directory, to help debug problems with the connection.
-@file{eb.log} records all the output from @code{EBMON}, including echoes
-of the commands sent to it.  Running @samp{tail -f} on this file in
-another window often helps to understand trouble with @code{EBMON}, or
-unexpected events on the PC side of the connection.
-_fi__(_AMD29K__)
-
-_if__(_VXWORKS__)
-_if__(!_GENERIC__)
-@node VxWorks Remote,  , EB29K Remote, Starting _GDBN__
-_fi__(!_GENERIC__)
-_if__(_GENERIC__)
-@node VxWorks Remote,  , EB29K Remote, Remote
-_fi__(_GENERIC__)
-@subsection _GDBN__ and VxWorks
-@cindex VxWorks
-_GDBN__ enables developers to spawn and debug tasks running on networked
-VxWorks targets from a Unix host.  Already-running tasks spawned from
-the VxWorks shell can also be debugged.  _GDBN__ uses code that runs on
-both the UNIX host and on the VxWorks target.  The program
-@code{_GDBP__} is installed and executed on the UNIX host.  
-
-The remote debugging interface (RDB) routines are installed and executed
-on the VxWorks target.  These routines are included in the VxWorks library
-@file{rdb.a} and are incorporated into the system image when source-level
-debugging is enabled in the VxWorks configuration.
-
-@kindex INCLUDE_RDB
-You can define @code{INCLUDE_RDB} in the VxWorks configuration file
-@file{configAll.h} to include the RDB interface routines and spawn the
-source debugging task @code{tRdbTask} when VxWorks is booted.  For more
-information on configuring and remaking VxWorks, see the @cite{VxWorks
-Programmer's Guide}.
-
-Once you have included the RDB interface in your VxWorks system image
-and set your Unix execution search path to find _GDBN__, you are ready
-to run _GDBN__.  From your UNIX host, type:
-
-@smallexample
-% _GDBP__
-@end smallexample
-
-_GDBN__ will come up showing the prompt:
-
-@smallexample
-(_GDBP__)
-@end smallexample
-
-@menu
-* VxWorks connection::          Connecting to VxWorks
-* VxWorks download::            VxWorks Download
-* VxWorks attach::              Running Tasks
-@end menu
-
-@node VxWorks connection, VxWorks download, VxWorks Remote, VxWorks Remote
-@subsubsection Connecting to VxWorks
-
-The _GDBN__ command @code{target} lets you connect to a VxWorks target on the
-network.  To connect to a target whose host name is ``@code{tt}'', type:
-
-@smallexample
-(_GDBP__) target vxworks tt
-@end smallexample
-
-_GDBN__ will display a message similar to the following:
-
-@smallexample
-Attaching remote machine across net... Success!
-@end smallexample
-
-_GDBN__ will then attempt to read the symbol tables of any object
-modules loaded into the VxWorks target since it was last booted.
-_GDBN__ locates these files by searching the directories listed in the
-command search path (@pxref{Environment}); if it fails to find an
-object file, it will display a message such as:
-
-@smallexample
-prog.o: No such file or directory.
-@end smallexample
-
-This will cause the @code{target} command to abort.  When this happens,
-you should add the appropriate directory to the search path, with the
-_GDBN__ command @code{path}, and execute the @code{target} command
-again.
-
-@node VxWorks download, VxWorks attach, VxWorks connection, VxWorks Remote
-@subsubsection VxWorks Download
-
-@cindex download to VxWorks
-If you have connected to the VxWorks target and you want to debug an
-object that has not yet been loaded, you can use the _GDBN__ @code{load}
-command to download a file from UNIX to VxWorks incrementally.  The
-object file given as an argument to the @code{load} command is actually
-opened twice: first by the VxWorks target in order to download the code,
-then by _GDBN__ in order to read the symbol table.  This can lead to
-problems if the current working directories on the two systems differ.
-It is simplest to set the working directory on both systems to the
-directory in which the object file resides, and then to reference the
-file by its name, without any path.  Thus, to load a program
-@file{prog.o}, residing in @file{wherever/vw/demo/rdb}, on VxWorks type:
-
-@smallexample
--> cd "wherever/vw/demo/rdb"
-@end smallexample
-
-On _GDBN__ type:
-
-@smallexample
-(_GDBP__) cd wherever/vw/demo/rdb 
-(_GDBP__) load prog.o
-@end smallexample
-
-_GDBN__ will display a response similar to the following:
-
-@smallexample
-Reading symbol data from wherever/vw/demo/rdb/prog.o... done.
-@end smallexample
-
-You can also use the @code{load} command to reload an object module
-after editing and recompiling the corresponding source file.  Note that
-this will cause _GDBN__ to delete all currently-defined breakpoints,
-auto-displays, and convenience variables, and to clear the value
-history.  (This is necessary in order to preserve the integrity of
-debugger data structures that reference the target system's symbol
-table.)
-
-@node VxWorks attach,  , VxWorks download, VxWorks Remote
-@subsubsection Running Tasks
-
-@cindex running VxWorks tasks
-You can also attach to an existing task using the @code{attach} command as
-follows:
-
-@smallexample
-(_GDBP__) attach @var{task}
-@end smallexample
-
-where @var{task} is the VxWorks hexadecimal task ID.  The task can be running
-or suspended when you attach to it.  If running, it will be suspended at
-the time of attachment.
-
-_fi__(_VXWORKS__)
index 53a01e4..e69de29 100755 (executable)
-_dnl__                                          -*-Texinfo-*-
-_dnl__ Copyright (c) 1988 1989 1990 1991 Free Software Foundation, Inc.
-\input texinfo
-@setfilename _GDBP__.info
-@c $Id$
-@c THIS MANUAL REQUIRES TEXINFO-2 macros and info-makers to format properly.
-@c
-@c NOTE: this manual is marked up for preprocessing with a collection
-@c of m4 macros called "pretex.m4".  If you see <_if__> and <_fi__>
-@c scattered around the source, you have the full source before
-@c preprocessing; if you don't, you have the source configured for
-@c _HOST__ architectures (and you can of course get the full source,
-@c with all configurations, from wherever you got this).
-_if__(0)
-
-THIS IS THE SOURCE PRIOR TO PREPROCESSING.  The full source needs to
-be run through m4 before either tex- or info- formatting: for example,
-_0__
-    m4 pretex.m4 none.m4 all.m4 gdb.texinfo >gdb-all.texinfo
-_1__
-will produce (assuming your path finds either GNU m4 >= 0.84, or SysV
-m4; Berkeley won't do) a file suitable for formatting.  See the text in
-"pretex.m4" for a fuller explanation (and the macro definitions).
-
-_fi__(0)
-_include__(gdbVN.m4)
-@tex
-\def\$#1${{#1}}  % Kluge: collect RCS revision info without $...$
-\xdef\manvers{\$Revision$}  % For use in headers, footers too
-@end tex
-@c
-@syncodeindex ky cp
-@c FOR UPDATES LEADING TO THIS DRAFT, GDB CHANGELOG CONSULTED BETWEEN:
-@c Fri Sep 20 16:10:52 1991  John Gilmore  (gnu at cygnus.com)
-@c Sat Dec 22 02:51:40 1990  John Gilmore  (gnu at cygint)
-@ifinfo
-This file documents the GNU debugger _GDBN__.
-
-Copyright (C) 1988, 1989, 1990, 1991 Free Software Foundation, Inc.
-
-Permission is granted to make and distribute verbatim copies of
-this manual provided the copyright notice and this permission notice
-are preserved on all copies.
-
-@ignore
-Permission is granted to process this file through TeX and print the
-results, provided the printed document carries copying permission
-notice identical to this one except for the removal of this paragraph
-(this paragraph not being relevant to the printed manual).
-
-@end ignore
-Permission is granted to copy and distribute modified versions of this
-manual under the conditions for verbatim copying, provided also that the
-section entitled ``GNU General Public License'' is included exactly as
-in the original, and provided that the entire resulting derived work is
-distributed under the terms of a permission notice identical to this
-one.
-
-Permission is granted to copy and distribute translations of this manual
-into another language, under the above conditions for modified versions,
-except that the section entitled ``GNU General Public License'' may be
-included in a translation approved by the Free Software Foundation
-instead of in the original English.
-@end ifinfo
-@c @smallbook
-@setchapternewpage odd
-_if__(_GENERIC__)
-@settitle Using _GDBN__ (<v>_GDB_VN__)
-_fi__(_GENERIC__)
-_if__(!_GENERIC__)
-@settitle Using _GDBN__ <v>_GDB_VN__ (_HOST__)
-_fi__(!_GENERIC__)
-@iftex
-@finalout
-@end iftex
-@titlepage
-@title{Using _GDBN__}
-@subtitle{A Guide to the GNU Source-Level Debugger}
-_if__(!_GENERIC__)
-@subtitle{On _HOST__ Systems}
-_fi__(!_GENERIC__)
-@sp 1
-@c Maybe crank this up to "Fourth Edition" when released at FSF
-@c @subtitle Third Edition---_GDBN__ version _GDB_VN__
-@subtitle _GDBN__ version _GDB_VN__
-@subtitle July 1991
-@author{Richard M. Stallman@qquad @hfill Free Software Foundation}
-@author{Roland H. Pesch@qquad @hfill Cygnus Support}
-@page
-@tex
-{\parskip=0pt
-\hfill rms\@ai.mit.edu, pesch\@cygnus.com\par
-\hfill {\it Using _GDBN__}, \manvers\par
-\hfill \TeX{}info \texinfoversion\par
-}
-@end tex
-
-@vskip 0pt plus 1filll
-Copyright @copyright{} 1988, 1989, 1990, 1991 Free Software Foundation, Inc.
-
-Permission is granted to make and distribute verbatim copies of
-this manual provided the copyright notice and this permission notice
-are preserved on all copies.
-
-Permission is granted to copy and distribute modified versions of this
-manual under the conditions for verbatim copying, provided also that the
-section entitled ``GNU General Public License'' is included exactly as
-in the original, and provided that the entire resulting derived work is
-distributed under the terms of a permission notice identical to this
-one.
-
-Permission is granted to copy and distribute translations of this manual
-into another language, under the above conditions for modified versions,
-except that the section entitled ``GNU General Public License'' may be
-included in a translation approved by the Free Software Foundation
-instead of in the original English.
-@end titlepage
-@page
-
-@node Top, Summary, (dir), (dir)
-@ifinfo
-This file describes version _GDB_VN__ of GDB, the GNU symbolic debugger.
-@end ifinfo
-
-@menu
-* Summary::                     Summary of _GDBN__
-* New Features::                New Features in _GDBN__ version _GDB_VN__
-* Sample Session::              A Sample _GDBN__ Session
-* Invocation::                  Getting In and Out of _GDBN__
-* Commands::                    _GDBN__ Commands
-* Running::                     Running Programs Under _GDBN__
-* Stopping::                    Stopping and Continuing
-* Stack::                       Examining the Stack
-* Source::                      Examining Source Files
-* Data::                        Examining Data
-* Languages::                   Using _GDBN__ with Different Languages
-* Symbols::                     Examining the Symbol Table
-* Altering::                    Altering Execution
-* _GDBN__ Files::                   _GDBN__'s Files
-* Targets::                     Specifying a Debugging Target 
-* Controlling _GDBN__::             Controlling _GDBN__
-* Sequences::                   Canned Sequences of Commands
-* Emacs::                       Using _GDBN__ under GNU Emacs
-* _GDBN__ Bugs::                    Reporting Bugs in _GDBN__
-* Renamed Commands::            
-* Installing _GDBN__::              Installing _GDBN__
-* Copying::                     GNU GENERAL PUBLIC LICENSE
-* Index::                       Index
-
- --- The Detailed Node Listing ---
-
-Summary of _GDBN__
-
-* Free Software::               Free Software
-* Contributors::                Contributors to _GDBN__
-
-Getting In and Out of _GDBN__
-
-* Starting _GDBN__::                Starting _GDBN__
-* Leaving _GDBN__::                 Leaving _GDBN__
-* Shell Commands::              Shell Commands
-
-Starting _GDBN__
-
-* File Options::                Choosing Files
-* Mode Options::                Choosing Modes
-
-_GDBN__ Commands
-
-* Command Syntax::              Command Syntax
-* Help::                        Getting Help
-
-Running Programs Under _GDBN__
-
-* Compilation::                 Compiling for Debugging
-* Starting::                    Starting your Program
-* Arguments::                   Your Program's Arguments
-* Environment::                 Your Program's Environment
-* Working Directory::           Your Program's Working Directory
-* Input/Output::                Your Program's Input and Output
-* Attach::                      Debugging an Already-Running Process
-* Kill Process::                Killing the Child Process
-
-Stopping and Continuing
-
-* Breakpoints::                 Breakpoints, Watchpoints, and Exceptions
-* Continuing and Stepping::     Resuming Execution
-* Signals::                     Signals
-
-Breakpoints, Watchpoints, and Exceptions
-
-* Set Breaks::                  Setting Breakpoints
-* Set Watchpoints::             Setting Watchpoints
-* Exception Handling::          Breakpoints and Exceptions
-* Delete Breaks::               Deleting Breakpoints
-* Disabling::                   Disabling Breakpoints
-* Conditions::                  Break Conditions
-* Break Commands::              Breakpoint Command Lists
-* Breakpoint Menus::            Breakpoint Menus
-* Error in Breakpoints::        ``Cannot insert breakpoints''
-
-Examining the Stack
-
-* Frames::                      Stack Frames
-* Backtrace::                   Backtraces
-* Selection::                   Selecting a Frame
-* Frame Info::                  Information on a Frame
-
-Examining Source Files
-
-* List::                        Printing Source Lines
-* Search::                      Searching Source Files
-* Source Path::                 Specifying Source Directories
-* Machine Code::                Source and Machine Code
-
-Examining Data
-
-* Expressions::                 Expressions
-* Variables::                   Program Variables
-* Arrays::                      Artificial Arrays
-* Output formats::              Output formats
-* Memory::                      Examining Memory
-* Auto Display::                Automatic Display
-* Print Settings::              Print Settings
-* Value History::               Value History
-* Convenience Vars::            Convenience Variables
-* Registers::                   Registers
-* Floating Point Hardware::     Floating Point Hardware
-
-Using GDB with Different Languages
-
-* Setting::                     Switching between source languages
-* Show::                        Displaying the language
-* Checks::                      Type and Range checks
-* Support::                     Supported languages
-
-Switching between source languages
-
-* Manually::                    Setting the working language manually
-* Automatically::               Having GDB infer the source language
-
-Type and range Checking
-
-* Type Checking::               An overview of type checking
-* Range Checking::              An overview of range checking
-
-Supported Languages
-
-* C::                           C and C++
-* Modula-2::                    Modula-2
-
-C and C++
-
-* C Operators::                 C and C++ Operators
-* C Constants::                 C and C++ Constants
-* Cplusplus expressions::       C++ Expressions
-* C Defaults::                  Default settings for C and C++
-* C Checks::                    C and C++ Type and Range Checks
-* Debugging C::                 _GDBN__ and C
-* Debugging C plus plus::       Special features for C++
-
-Modula-2
-
-* M2 Operators::                Built-in operators
-* Builtin Func/Proc::           Built-in Functions and Procedures
-* M2 Constants::                Modula-2 Constants
-* M2 Defaults::                 Default settings for Modula-2
-* Deviations::                  Deviations from standard Modula-2
-* M2 Checks::                   Modula-2 Type and Range Checks
-* M2 Scope::                    The scope operators @code{::} and @code{.}
-* GDB/M2::                      GDB and Modula-2
-
-Altering Execution
-
-* Assignment::                  Assignment to Variables
-* Jumping::                     Continuing at a Different Address
-* Signaling::                   Giving the Program a Signal
-* Returning::                   Returning from a Function
-* Calling::                     Calling your Program's Functions
-* Patching::                    Patching your Program
-
-_GDBN__'s Files
-
-* Files::                       Commands to Specify Files
-* Symbol Errors::               Errors Reading Symbol Files
-
-Specifying a Debugging Target 
-
-* Active Targets::              Active Targets
-* Target Commands::             Commands for Managing Targets
-* Remote::                      Remote Debugging
-
-Remote Debugging
-
-* i960-Nindy Remote::           _GDBN__ with a Remote i960 (Nindy)
-* EB29K Remote::                _GDBN__ with a Remote EB29K
-* VxWorks Remote::              _GDBN__ and VxWorks
-
-_GDBN__ with a Remote i960 (Nindy)
-
-* Nindy Startup::               Startup with Nindy
-* Nindy Options::               Options for Nindy
-* Nindy reset::                 Nindy Reset Command
-
-_GDBN__ with a Remote EB29K
-
-* Comms (EB29K)::               Communications Setup
-* gdb-EB29K::                   EB29K cross-debugging
-* Remote Log::                  Remote Log
-
-_GDBN__ and VxWorks
-
-* VxWorks connection::          Connecting to VxWorks
-* VxWorks download::            VxWorks Download
-* VxWorks attach::              Running Tasks
-
-Controlling _GDBN__
-
-* Prompt::                      Prompt
-* Editing::                     Command Editing
-* History::                     Command History
-* Screen Size::                 Screen Size
-* Numbers::                     Numbers
-* Messages/Warnings::           Optional Warnings and Messages
-
-Canned Sequences of Commands
-
-* Define::                      User-Defined Commands
-* Command Files::               Command Files
-* Output::                      Commands for Controlled Output
-
-Reporting Bugs in _GDBN__
-
-* Bug Criteria::                Have You Found a Bug?
-* Bug Reporting::               How to Report Bugs
-
-Installing GDB
-
-* Subdirectories::              Configuration subdirectories
-* Config Names::                Specifying names for hosts and targets
-* configure Options::           Summary of options for configure
-* Formatting Documentation::    How to format and print GDB documentation
-@end menu
-
-@node Summary, New Features, Top, Top
-@unnumbered Summary of _GDBN__
-
-The purpose of a debugger such as _GDBN__ is to allow you to see what is
-going on ``inside'' another program while it executes---or what another
-program was doing at the moment it crashed.  
-
-_GDBN__ can do four main kinds of things (plus other things in support of
-these) to help you catch bugs in the act:
-
-@itemize @bullet
-@item
-Start your program, specifying anything that might affect its behavior.
-
-@item
-Make your program stop on specified conditions.
-
-@item
-Examine what has happened, when your program has stopped.
-
-@item
-Change things in your program, so you can experiment with correcting the
-effects of one bug and go on to learn about another.
-@end itemize
-
-You can use _GDBN__ to debug programs written in C, C++, and Modula-2.
-Fortran support will be added when a GNU Fortran compiler is ready.
-
-@menu
-* Free Software::               Free Software
-* Contributors::                Contributors to GDB
-@end menu
-
-@node Free Software, Contributors, Summary, Summary
-@unnumberedsec Free Software
-_GDBN__ is @dfn{free software}, protected by the GNU General Public License (GPL).
-The GPL gives you the freedom to copy or adapt a licensed
-program---but every person getting a copy also gets with it the
-freedom to modify that copy (which means that they must get access to
-the source code), and the freedom to distribute further copies.
-Typical software companies use copyrights to limit your freedoms; the
-Free Software Foundation uses the GPL to preserve these freedoms.
-
-Fundamentally, the General Public License is a license which says that
-you have these freedoms and that you can't take these freedoms away
-from anyone else.
-
-@c FIXME: (passim) go through all xrefs, expanding to use text headings
-For full details, @pxref{Copying}.
-@node Contributors,  , Free Software, Summary
-@unnumberedsec Contributors to GDB
-
-Richard Stallman was the original author of GDB, and of many other GNU
-programs.  Many others have contributed to its development.  This
-section attempts to credit major contributors.  One of the virtues of
-free software is that everyone is free to contribute to it; with
-regret, we cannot actually acknowledge everyone here.  The file
-@file{ChangeLog} in the GDB distribution approximates a blow-by-blow
-account.
-
-Changes much prior to version 2.0 are lost in the mists of time.
-
-@quotation
-@emph{Plea:} Additions to this section are particularly welcome.  If you
-or your friends (or enemies; let's be evenhanded) have been unfairly
-omitted from this list, we would like to add your names!
-@end quotation
-
-So that they may not regard their long labor as thankless, we
-particularly thank those who shepherded GDB through major releases: John
-Gilmore (releases _GDB_VN__, 4.0); Jim Kingdon (releases 3.9, 3.5, 3.4, 3.3);
-and Randy Smith (releases 3.2, 3.1, 3.0).  As major maintainer of GDB
-for some period, each contributed significantly to the structure,
-stability, and capabilities of the entire debugger.
-
-Richard Stallman, assisted at various times by Pete TerMaat, Chris
-Hanson, and Richard Mlynarik, handled releases through 2.8.
-
-Michael Tiemann is the author of most of the GNU C++ support in GDB,
-with significant additional contributions from Per Bothner.  James
-Clark wrote the GNU C++ demangler.  Early work on C++ was by Peter
-TerMaat (who also did much general update work leading to release 3.0).
-
-GDB _GDB_VN__ uses the BFD subroutine library to examine multiple
-object-file formats; BFD was a joint project of V. Gumby
-Henkel-Wallace, Rich Pixley, Steve Chamberlain, and John Gilmore.
-
-David Johnson wrote the original COFF support; Pace Willison did
-the original support for encapsulated COFF.
-
-Adam de Boor and Bradley Davis contributed the ISI Optimum V support.
-Per Bothner, Noboyuki Hikichi, and Alessandro Forin contributed MIPS
-support.  Jean-Daniel Fekete contributed Sun 386i support.  Chris
-Hanson improved the HP9000 support.  Noboyuki Hikichi and Tomoyuki
-Hasei contributed Sony/News OS 3 support.  David Johnson contributed
-Encore Umax support.  Jyrki Kuoppala contributed Altos 3068 support.
-Keith Packard contributed NS32K support.  Doug Rabson contributed
-Acorn Risc Machine support.  Chris Smith contributed Convex support
-(and Fortran debugging).  Jonathan Stone contributed Pyramid support.
-Michael Tiemann contributed SPARC support.  Tim Tucker contributed
-support for the Gould NP1 and Gould Powernode.  Pace Willison
-contributed Intel 386 support.  Jay Vosburgh contributed Symmetry
-support.
-
-Rich Schaefer and Peter Schauer helped with support of SunOS shared
-libraries.
-
-Jay Fenlason and Roland McGrath ensured that GDB and GAS agree about
-several machine instruction sets.
-
-Patrick Duval, Ted Goldstein, Vikram Koka and Glenn Engel helped
-develop remote debugging.  Intel Corporation and Wind River Systems
-contributed remote debugging modules for their products.
-
-Brian Fox is the author of the readline libraries providing
-command-line editing and command history.
-
-Andrew Beers of SUNY Buffalo wrote the language-switching code and
-the Modula-2 support, and contributed the Languages chapter of this
-manual. 
-
-@node New Features, Sample Session, Summary, Top
-@unnumbered New Features since _GDBN__ version 3.5
-
-@table @emph
-@item Targets
-Using the new command @code{target}, you can select at runtime whether
-you are debugging local files, local processes, standalone systems over
-a serial port, realtime systems over a TCP/IP connection, etc.  The
-command @code{load} can download programs into a remote system.  Serial
-stubs are available for Motorola 680x0 and Intel 80386 remote systems;
-_GDBN__ also supports debugging realtime processes running under
-VxWorks, using SunRPC Remote Procedure Calls over TCP/IP to talk to a
-debugger stub on the target system.  Internally, _GDBN__ now uses a
-function vector to mediate access to different targets; if you need to
-add your own support for a remote protocol, this makes it much easier.
-
-@item Watchpoints
-_GDBN__ now sports watchpoints as well as breakpoints.  You can use a
-watchpoint to stop execution whenever the value of an expression
-changes, without having to predict a particular place in your program
-where this may happen.
-
-@item Wide Output
-Commands that issue wide output now insert newlines at places designed
-to make the output more readable.
-
-@item Object Code Formats
-_GDBN__ uses a new library called the Binary File Descriptor (BFD)
-Library to permit it to switch dynamically, without reconfiguration or
-recompilation, between different object-file formats.  Formats currently
-supported are COFF, a.out, and the Intel 960 b.out; files may be read as
-.o's, archive libraries, or core dumps.  BFD is available as a
-subroutine library so that other programs may take advantage of it, and
-the other GNU binary utilities are being converted to use it.
-
-@item Configuration and Ports
-Compile-time configuration (to select a particular architecture and
-operating system) is much easier.  The script @code{configure} now
-allows you to configure _GDBN__ as either a native debugger or a
-cross-debugger. @xref{Installing _GDBN__} for details on how to
-configure and on what architectures are now available.
-
-@item Interaction
-The user interface to _GDBN__'s control variables has been simplified
-and consolidated in two commands, @code{set} and @code{show}.  Output
-lines are now broken at readable places, rather than overflowing onto
-the next line.  You can suppress output of machine-level addresses,
-displaying only source language information.
-
-
-@item C++
-_GDBN__ now supports C++ multiple inheritance (if used with a GCC
-version 2 compiler), and also has limited support for C++ exception
-handling, with the commands @code{catch} and @code{info catch}: _GDBN__
-can break when an exception is raised, before the stack is peeled back
-to the exception handler's context.
-
-@item Modula-2
-_GDBN__ now has preliminary support for the GNU Modula-2 compiler,
-currently under development at the State University of New York at
-Buffalo.  Coordinated development of both _GDBN__ and the GNU Modula-2
-compiler will continue through the fall of 1991 and into 1992.  Other
-Modula-2 compilers are currently not supported, and attempting to debug
-programs compiled with them will likely result in an error as the symbol
-table of the executable is read in.
-
-@item Command Rationalization
-Many _GDBN__ commands have been renamed to make them easier to remember
-and use.  In particular, the subcommands of @code{info} and
-@code{show}/@code{set} are grouped to make the former refer to the state
-of your program, and the latter refer to the state of _GDBN__ itself.
-@xref{Renamed Commands}, for details on what commands were renamed.
-
-@item Shared Libraries
-_GDBN__ _GDB_VN__ can debug programs and core files that use SunOS shared
-libraries. 
-
-@item Reference Card
-_GDBN__ _GDB_VN__ has a reference card; @xref{Formatting Documentation} for
-instructions on printing it.
-
-@item Work in Progress
-Kernel debugging for BSD and Mach systems; Tahoe and HPPA architecture
-support.
-
-@end table
-
-@node Sample Session, Invocation, New Features, Top
-@chapter A Sample _GDBN__ Session
-
-You can use this manual at your leisure to read all about _GDBN__.
-However, a handful of commands are enough to get started using the
-debugger.  This chapter illustrates these commands.
-
-@iftex
-In this sample session, we emphasize user input like this: @i{input},
-to make it easier to pick out from the surrounding output.
-@end iftex
-
-@c FIXME: this example may not be appropriate for some configs, where
-@c FIXME...primary interest is in remote use.
-_0__
-One of the preliminary versions of GNU @code{m4} (a generic macro
-processor) exhibits the following bug: sometimes, when we change its
-quote strings from the default, the commands used to capture one macro's
-definition in another stop working.  In the following short @code{m4}
-session, we define a macro @code{foo} which expands to @code{0000}; we
-then use the @code{m4} builtin @code{defn} to define @code{bar} as the
-same thing.  However, when we change the open quote string to
-@code{<QUOTE>} and the close quote string to @code{<UNQUOTE>}, the same
-procedure fails to define a new synonym @code{baz}:
-
-@smallexample
-$ @i{cd gnu/m4}
-$ @i{./m4}
-@i{define(foo,0000)}
-
-@i{foo}
-0000
-@i{define(bar,defn(`foo'))}
-
-@i{bar}
-0000
-@i{changequote(<QUOTE>,<UNQUOTE>)}
-
-@i{define(baz,defn(<QUOTE>foo<UNQUOTE>))}
-@i{baz}
-@i{C-d}
-m4: End of input: 0: fatal error: EOF in string
-@end smallexample
-
-@noindent
-Let's use _GDBN__ to try to see what's going on.
-
-@smallexample
-$ @i{_GDBP__ m4}
-GDB is free software and you are welcome to distribute copies of it
- under certain conditions; type "info copying" to see the conditions.
-There is absolutely no warranty for GDB; type "info warranty" for details.
-GDB _GDB_VN__, Copyright 1991 Free Software Foundation, Inc...
-(_GDBP__) 
-@end smallexample
-
-@noindent
-_GDBN__ reads only enough symbol data to know where to find the rest
-when needed; as a result, the first prompt comes up very quickly.  We
-then tell _GDBN__ to use a narrower display width than usual, so
-that examples will fit in this manual.
-
-@smallexample
-(_GDBP__) @i{set width 70}
-@end smallexample
-
-@noindent 
-Let's see how the @code{m4} builtin @code{changequote} works.
-Having looked at the source, we know the relevant subroutine is
-@code{m4_changequote}, so we set a breakpoint there with _GDBN__'s
-@code{break} command.
-
-@smallexample
-(_GDBP__) @i{break m4_changequote}
-Breakpoint 1 at 0x62f4: file builtin.c, line 879.
-@end smallexample
-
-@noindent
-Using the @code{run} command, we start @code{m4} running under _GDBN__
-control; as long as control does not reach the @code{m4_changequote}
-subroutine, the program runs as usual:
-
-@smallexample
-(_GDBP__) @i{run}
-Starting program: /work/Editorial/gdb/gnu/m4/m4 
-@i{define(foo,0000)}
-
-@i{foo}
-0000
-@end smallexample
-
-@noindent
-To trigger the breakpoint, we call @code{changequote}.  _GDBN__
-suspends execution of @code{m4}, displaying information about the
-context where it stops.
-
-@smallexample
-@i{changequote(<QUOTE>,<UNQUOTE>)}
-
-Breakpoint 1, m4_changequote (argc=3, argv=0x33c70) at builtin.c:879
-879         if (bad_argc(TOKEN_DATA_TEXT(argv[0]), argc, 1, 3))
-@end smallexample
-
-@noindent
-Now we use the command @code{n} (@code{next}) to advance execution to
-the next line of the current function.
-
-@smallexample
-(_GDBP__) @i{n}
-882         set_quotes((argc >= 2) ? TOKEN_DATA_TEXT(argv[1]) : nil,
-@end smallexample
-
-@noindent
-@code{set_quotes} looks like a promising subroutine.  We can go into it
-by using the command @code{s} (@code{step}) instead of @code{next}.
-@code{step} goes to the next line to be executed in @emph{any}
-subroutine, so it steps into @code{set_quotes}.  
-
-@smallexample
-(_GDBP__) @i{s}
-set_quotes (lq=0x34c78 "<QUOTE>", rq=0x34c88 "<UNQUOTE>")
-    at input.c:530
-530         if (lquote != def_lquote)
-@end smallexample
-
-@noindent
-The summary display showing the subroutine where @code{m4} is now
-suspended (and its arguments) is called a stack frame display.  We can
-use the @code{backtrace} command (which can also be spelled @code{bt}),
-to see where we are in the stack: it displays a stack frame for each
-active subroutine.
-
-@smallexample
-(_GDBP__) @i{bt}
-#0  set_quotes (lq=0x34c78 "<QUOTE>", rq=0x34c88 "<UNQUOTE>")
-    at input.c:530
-#1  0x6344 in m4_changequote (argc=3, argv=0x33c70) at builtin.c:882
-#2  0x8174 in expand_macro (sym=0x33320) at macro.c:242
-#3  0x7a88 in expand_token (obs=0x0, t=209696, td=0xf7fffa30)
-    at macro.c:71
-#4  0x79dc in expand_input () at macro.c:40
-#5  0x2930 in main (argc=0, argv=0xf7fffb20) at m4.c:195
-@end smallexample
-
-@noindent
-Let's step through a few more lines to see what happens.  The first two
-times, we can use @samp{s}; the next two times we use @code{n} to avoid
-falling into the @code{xstrdup} subroutine.
-@smallexample
-(_GDBP__) @i{s}
-0x3b5c  532         if (rquote != def_rquote)
-(_GDBP__) @i{s}
-0x3b80  535         lquote = (lq == nil || *lq == '\0') ? def_lquote :\
- xstrdup(lq);
-(_GDBP__) @i{n}
-536         rquote = (rq == nil || *rq == '\0') ? def_rquote : xstrdup\
-(rq);
-(_GDBP__) @i{n}
-538         len_lquote = strlen(rquote);
-@end smallexample
-
-@noindent
-The last line displayed looks a little odd; let's examine the variables
-@code{lquote} and @code{rquote} to see if they are in fact the new left
-and right quotes we specified.  We can use the command @code{p}
-(@code{print}) to see their values.
-
-@smallexample
-(_GDBP__) @i{p lquote}
-$1 = 0x35d40 "<QUOTE>"
-(_GDBP__) @i{p rquote}
-$2 = 0x35d50 "<UNQUOTE>"
-@end smallexample
-
-@noindent
-@code{lquote} and @code{rquote} are indeed the new left and right quotes.
-Let's look at some context; we can display ten lines of source
-surrounding the current line, with the @code{l} (@code{list}) command.
-
-@smallexample
-(_GDBP__) @i{l}
-533             xfree(rquote);
-534     
-535         lquote = (lq == nil || *lq == '\0') ? def_lquote : xstrdup\
-(lq);
-536         rquote = (rq == nil || *rq == '\0') ? def_rquote : xstrdup\
-(rq);
-537     
-538         len_lquote = strlen(rquote);
-539         len_rquote = strlen(lquote);
-540     @}
-541     
-542     void
-@end smallexample
-
-@noindent
-Let's step past the two lines that set @code{len_lquote} and
-@code{len_rquote}, and then examine the values of those variables.
-
-@smallexample
-(_GDBP__) @i{n}
-539         len_rquote = strlen(lquote);
-(_GDBP__) @i{n}
-540     @}
-(_GDBP__) @i{p len_lquote}
-$3 = 9
-(_GDBP__) @i{p len_rquote}
-$4 = 7
-@end smallexample
-
-@noindent
-That certainly looks wrong, assuming @code{len_lquote} and
-@code{len_rquote} are meant to be the lengths of @code{lquote} and
-@code{rquote} respectively.  Let's try setting them to better values.
-We can use the @code{p} command for this, since it'll print the value of
-any expression---and that expression can include subroutine calls and
-assignments. 
-
-@smallexample
-(_GDBP__) p len_lquote=strlen(lquote)
-$5 = 7
-(_GDBP__) p len_rquote=strlen(rquote)
-$6 = 9
-@end smallexample
-
-@noindent
-Let's see if that fixes the problem of using the new quotes with the
-@code{m4} built-in @code{defn}.  We can allow @code{m4} to continue
-executing with the @code{c} (@code{continue}) command, and then try the
-example that caused trouble initially:
-
-@smallexample
-(_GDBP__) @i{c}
-Continuing.
-
-@i{define(baz,defn(<QUOTE>foo<UNQUOTE>))}
-
-baz
-0000
-@end smallexample
-
-@noindent
-Success!  The new quotes now work just as well as the default ones.  The
-problem seems to have been just the two typos defining the wrong
-lengths.  We'll let @code{m4} exit by giving it an EOF as input.
-
-@smallexample
-@i{C-d}
-Program exited normally.
-@end smallexample
-
-@noindent 
-The message @samp{Program exited normally.} is from _GDBN__; it
-indicates @code{m4} has finished executing.  We can end our _GDBN__
-session with the _GDBN__ @code{quit} command.
-
-@smallexample
-(_GDBP__) @i{quit}
-_1__@end smallexample
-
-@node Invocation, Commands, Sample Session, Top
-@chapter Getting In and Out of _GDBN__
-
-@menu
-* Starting _GDBN__::                Starting _GDBN__
-* Leaving _GDBN__::                 Leaving _GDBN__
-* Shell Commands::              Shell Commands
-@end menu
-
-@node Starting _GDBN__, Leaving _GDBN__, Invocation, Invocation
-@section Starting _GDBN__
-
-_GDBN__ is invoked with the shell command @code{_GDBP__}.  Once started,
-it reads commands from the terminal until you tell it to exit.
-
-You can run @code{_GDBP__} with no arguments or options; but the most
-usual way to start _GDBN__ is with one argument or two, specifying an
-executable program as the argument:
-@example
-_GDBP__ program
-@end example
-@noindent
-You can also start with both an executable program and a core file specified:
-@example
-_GDBP__ program core
-@end example
-
-You can, instead, specify a process ID as a second argument, if you want
-to debug a running process:
-@example
-_GDBP__ program 1234
-@end example
-@noindent
-would attach _GDBN__ to process @code{1234} (unless you also have a file
-named @file{1234}; _GDBN__ does check for a core file first).
-
-@noindent
-You can further control how _GDBN__ starts up by using command-line
-options.  _GDBN__ itself can remind you of the options available:
-@example
-_GDBP__ -help
-@end example
-@noindent
-will display all available options and briefly describe their use
-(@samp{_GDBP__ -h} is a shorter equivalent).
-
-All options and command line arguments you give are processed
-in sequential order.  The order makes a difference when the
-@samp{-x} option is used.  
-
-@menu
-* File Options::                Choosing Files
-* Mode Options::                Choosing Modes
-_if__(!_GENERIC__)
-_include__(gdbinv-m.m4)_dnl__
-_fi__(!_GENERIC__)
-@end menu
-
-@node File Options, Mode Options, Starting _GDBN__, Starting _GDBN__
-@subsection Choosing Files
-
-As shown above, any arguments other than options specify an executable
-file and core file; that is, the first argument encountered with no
-associated option flag is equivalent to a @samp{-se} option, and the
-second, if any, is equivalent to a @samp{-c} option.  Many options have
-both long and short forms; both are shown here.  The long forms are also
-recognized if you truncate them, so long as enough of the option is
-present to be unambiguous.  (If you prefer, you can flag option
-arguments with @samp{+} rather than @samp{-}, though we illustrate the
-more usual convention.)
-
-@table @code
-@item -symbols=@var{file}
-@itemx -s @var{file}
-Read symbol table from file @var{file}.
-
-@item -exec=@var{file}
-@itemx -e @var{file}
-Use file @var{file} as the executable file to execute when
-appropriate, and for examining pure data in conjunction with a core
-dump.
-
-@item -se=@var{file}
-Read symbol table from file @var{file} and use it as the executable
-file.
-
-@item -core=@var{file}
-@itemx -c @var{file}
-Use file @var{file} as a core dump to examine.
-
-@item -command=@var{file}
-@itemx -x @var{file}
-Execute _GDBN__ commands from file @var{file}.  @xref{Command Files}.
-
-@item -directory=@var{directory}
-@itemx -d @var{directory}
-Add @var{directory} to the path to search for source files.
-@end table
-
-_if__(!_GENERIC__)
-@node Mode Options, Mode Options, File Options, Starting _GDBN__
-_fi__(!_GENERIC__)
-_if__(_GENERIC__)
-@node Mode Options,  , File Options, Starting _GDBN__
-_fi__(_GENERIC__)
-@subsection Choosing Modes
-
-@table @code
-@item -nx
-@itemx -n
-Do not execute commands from any @file{_GDBINIT__} initialization files.
-Normally, the commands in these files are executed after all the
-command options and arguments have been processed.  
-@xref{Command Files}.
-
-@item -quiet
-@itemx -q
-``Quiet''.  Do not print the introductory and copyright messages.  These
-messages are also suppressed in batch mode.
-
-@item -batch
-Run in batch mode.  Exit with status @code{0} after processing all the command
-files specified with @samp{-x} (and @file{_GDBINIT__}, if not inhibited).
-Exit with nonzero status if an error occurs in executing the _GDBN__
-commands in the command files.  
-
-Batch mode may be useful for running _GDBN__ as a filter, for example to
-download and run a program on another computer; in order to make this
-more useful, the message 
-@example
-Program exited normally.
-@end example
-@noindent
-(which is ordinarily issued whenever a program running under _GDBN__ control
-terminates) is not issued when running in batch mode.
-
-@item -cd=@var{directory}
-Run _GDBN__ using @var{directory} as its working directory,
-instead of the current directory.
-
-@item -fullname
-@itemx -f
-Emacs sets this option when it runs _GDBN__ as a subprocess.  It tells _GDBN__
-to output the full file name and line number in a standard,
-recognizable fashion each time a stack frame is displayed (which
-includes each time the program stops).  This recognizable format looks
-like two @samp{\032} characters, followed by the file name, line number
-and character position separated by colons, and a newline.  The
-Emacs-to-_GDBN__ interface program uses the two @samp{\032} characters as
-a signal to display the source code for the frame.
-
-@item -b @var{bps}
-Set the line speed (baud rate or bits per second) of any serial
-interface used by _GDBN__ for remote debugging.
-
-@item -tty=@var{device}
-Run using @var{device} for your program's standard input and output.
-@c FIXME: kingdon thinks there's more to -tty.  Investigate.
-@end table
-
-_if__(!_GENERIC__)
-_include__(gdbinv-s.m4)
-_fi__(!_GENERIC__)
-
-@node Leaving _GDBN__, Shell Commands, Starting _GDBN__, Invocation
-@section Leaving _GDBN__
-@cindex exiting _GDBN__
-@table @code
-@item quit
-@kindex quit
-@kindex q
-To exit _GDBN__, use the @code{quit} command (abbreviated @code{q}), or type
-an end-of-file character (usually @kbd{C-d}).  
-@end table
-
-@cindex interrupt
-An interrupt (often @kbd{C-c}) will not exit from _GDBN__, but rather
-will terminate the action of any _GDBN__ command that is in progress and
-return to _GDBN__ command level.  It is safe to type the interrupt
-character at any time because _GDBN__ does not allow it to take effect
-until a time when it is safe.
-
-If you've been using _GDBN__ to control an attached process or device,
-you can release it with the @code{detach} command; @pxref{Attach}.
-
-@node Shell Commands,  , Leaving _GDBN__, Invocation
-@section Shell Commands
-If you need to execute occasional shell commands during your
-debugging session, there's no need to leave or suspend _GDBN__; you can
-just use the @code{shell} command.
-
-@table @code
-@item shell @var{command string}
-@kindex shell
-@cindex shell escape
-Directs _GDBN__ to invoke an inferior shell to execute @var{command
-string}.  If it exists, the environment variable @code{SHELL} is used
-for the name of the shell to run.  Otherwise _GDBN__ uses
-@code{/bin/sh}.
-@end table
-
-The utility @code{make} is often needed in development environments.
-You don't have to use the @code{shell} command for this purpose in _GDBN__:
-
-@table @code
-@item make @var{make-args}
-@kindex make
-@cindex calling make
-Causes _GDBN__ to execute an inferior @code{make} program with the specified
-arguments.  This is equivalent to @samp{shell make @var{make-args}}.
-@end table
-
-@node Commands, Running, Invocation, Top
-@chapter _GDBN__ Commands
-
-@menu
-* Command Syntax::              Command Syntax
-* Help::                        Getting Help
-@end menu
-
-@node Command Syntax, Help, Commands, Commands
-@section Command Syntax
-A _GDBN__ command is a single line of input.  There is no limit on how long
-it can be.  It starts with a command name, which is followed by arguments
-whose meaning depends on the command name.  For example, the command
-@code{step} accepts an argument which is the number of times to step,
-as in @samp{step 5}.  You can also use the @code{step} command with
-no arguments.  Some command names do not allow any arguments.
-
-@cindex abbreviation
-_GDBN__ command names may always be truncated if that abbreviation is
-unambiguous.  Other possible command abbreviations are listed in the
-documentation for individual commands.  In some cases, even ambiguous
-abbreviations are allowed; for example, @code{s} is specially defined as
-equivalent to @code{step} even though there are other commands whose
-names start with @code{s}.  You can test abbreviations by using them as
-arguments to the @code{help} command.
-
-@cindex repeating commands  
-@kindex RET
-A blank line as input to _GDBN__ (typing just @key{RET}) means to
-repeat the previous command. Certain commands (for example, @code{run})
-will not repeat this way; these are commands for which unintentional
-repetition might cause trouble and which you are unlikely to want to
-repeat.
-
-The @code{list} and @code{x} commands, when you repeat them with
-@key{RET}, construct new arguments rather than repeating
-exactly as typed.  This permits easy scanning of source or memory.
-
-_GDBN__ can also use @key{RET} in another way: to partition lengthy
-output, in a way similar to the common utility @code{more}
-(@pxref{Screen Size}).  Since it's easy to press one @key{RET} too many
-in this situation, _GDBN__ disables command repetition after any command
-that generates this sort of display.
-
-@kindex #
-@cindex comment
-A line of input starting with @kbd{#} is a comment; it does nothing.
-This is useful mainly in command files (@xref{Command Files}).
-
-@node Help,  , Command Syntax, Commands
-@section Getting Help
-@cindex online documentation
-@kindex help
-You can always ask _GDBN__ itself for information on its commands, using the
-command @code{help}.  
-
-@table @code
-@item help
-@itemx h
-@kindex h
-You can use @code{help} (abbreviated @code{h}) with no arguments to
-display a short list of named classes of commands:
-@smallexample
-(_GDBP__) help
-List of classes of commands:
-
-running -- Running the program
-stack -- Examining the stack
-data -- Examining data
-breakpoints -- Making program stop at certain points
-files -- Specifying and examining files
-status -- Status inquiries
-support -- Support facilities
-user-defined -- User-defined commands
-aliases -- Aliases of other commands
-obscure -- Obscure features
-
-Type "help" followed by a class name for a list of commands in that class.
-Type "help" followed by command name for full documentation.
-Command name abbreviations are allowed if unambiguous.
-(_GDBP__) 
-@end smallexample
-
-@item help @var{class}
-Using one of the general help classes as an argument, you can get a
-list of the individual commands in that class.  For example, here is the
-help display for the class @code{status}:
-@smallexample
-(_GDBP__) help status
-Status inquiries.
-
-List of commands:
-
-show -- Generic command for showing things set with "set"
-info -- Generic command for printing status
-
-Type "help" followed by command name for full documentation.
-Command name abbreviations are allowed if unambiguous.
-(_GDBP__) 
-@end smallexample
-
-@item help @var{command}
-With a command name as @code{help} argument, _GDBN__ will display a
-short paragraph on how to use that command.  
-@end table
-
-In addition to @code{help}, you can use the _GDBN__ commands @code{info}
-and @code{show} to inquire about the state of your program, or the state
-of _GDBN__ itself.  Each command supports many topics of inquiry; this
-manual introduces each of them in the appropriate context.  The listings
-under @code{info} and under @code{show} in the Index point to
-all the sub-commands.
-@c FIXME: @pxref{Index} used to be here, but even though it shows up in
-@c FIXME...the 'aux' file with a pageno the xref can't find it.  
-
-@c @group
-@table @code
-@item info
-@kindex info
-@kindex i
-This command (abbreviated @code{i}) is for describing the state of your
-program; for example, it can list the arguments given to your program
-(@code{info args}), the registers currently in use (@code{info
-registers}), or the breakpoints you've set (@code{info breakpoints}).
-You can get a complete list of the @code{info} sub-commands with
-@w{@code{help info}}.
-
-@kindex show
-@item show
-In contrast, @code{show} is for describing the state of _GDBN__ itself.
-You can change most of the things you can @code{show}, by using the
-related command @code{set}; for example, you can control what number
-system is used for displays with @code{set radix}, or simply inquire
-which is currently in use with @code{show radix}.  
-
-@kindex info set
-To display all the settable parameters and their current
-values, you can use @code{show} with no arguments; you may also use
-@code{info set}.  Both commands produce the same display.
-@c FIXME: "info set" violates the rule that "info" is for state of
-@c FIXME...program.  Ck w/ GNU: "info set" to be called something else,
-@c FIXME...or change desc of rule---eg "state of prog and debugging session"?
-@end table
-@c @end group
-
-Here are three miscellaneous @code{show} subcommands, all of which are
-exceptional in lacking corresponding @code{set} commands:
-
-@table @code
-@kindex show version
-@cindex version number
-@item show version
-Show what version of _GDBN__ is running.  You should include this
-information in _GDBN__ bug-reports.  If multiple versions of _GDBN__ are
-in use at your site, you may occasionally want to make sure what version
-of _GDBN__ you're running; as _GDBN__ evolves, new commands are
-introduced, and old ones may wither away.  The version number is also
-announced when you start _GDBN__ with no arguments.
-
-@kindex show copying
-@item show copying
-Display information about permission for copying _GDBN__.
-
-@kindex show warranty
-@item show warranty
-Display the GNU ``NO WARRANTY'' statement.
-@end table
-
-@node Running, Stopping, Commands, Top
-@chapter Running Programs Under _GDBN__
-
-@menu
-* Compilation::                 Compiling for Debugging
-* Starting::                    Starting your Program
-* Arguments::                   Your Program's Arguments
-* Environment::                 Your Program's Environment
-* Working Directory::           Your Program's Working Directory
-* Input/Output::                Your Program's Input and Output
-* Attach::                      Debugging an Already-Running Process
-* Kill Process::                Killing the Child Process
-@end menu
-
-@node Compilation, Starting, Running, Running
-@section Compiling for Debugging
-
-In order to debug a program effectively, you need to generate
-debugging information when you compile it.  This debugging information
-is stored in the object file; it describes the data type of each
-variable or function and the correspondence between source line numbers
-and addresses in the executable code.
-
-To request debugging information, specify the @samp{-g} option when you run
-the compiler.
-
-Many C compilers are unable to handle the @samp{-g} and @samp{-O}
-options together.  Using those compilers, you cannot generate optimized
-executables containing debugging information.
-
-The GNU C compiler supports @samp{-g} with or without @samp{-O}, making it
-possible to debug optimized code.  We recommend that you @emph{always} use
-@samp{-g} whenever you compile a program.  You may think the program is
-correct, but there's no sense in pushing your luck.
-
-Some things do not work as well with @samp{-g -O} as with just
-@samp{-g}, particularly on machines with instruction scheduling.  If in
-doubt, recompile with @samp{-g} alone, and if this fixes the problem,
-please report it as a bug (including a test case!).
-
-Older versions of the GNU C compiler permitted a variant option
-@samp{-gg} for debugging information.  _GDBN__ no longer supports this
-format; if your GNU C compiler has this option, do not use it.
-
-@ignore
-@comment As far as I know, there are no cases in which _GDBN__ will
-@comment produce strange output in this case.  (but no promises).
-If your program includes archives made with the @code{ar} program, and
-if the object files used as input to @code{ar} were compiled without the
-@samp{-g} option and have names longer than 15 characters, _GDBN__ will get
-confused reading the program's symbol table.  No error message will be
-given, but _GDBN__ may behave strangely.  The reason for this problem is a
-deficiency in the Unix archive file format, which cannot represent file
-names longer than 15 characters.
-
-To avoid this problem, compile the archive members with the @samp{-g}
-option or use shorter file names.  Alternatively, use a version of GNU
-@code{ar} dated more recently than August 1989.
-@end ignore
-
-
-@node Starting, Arguments, Compilation, Running
-@section Starting your Program
-@cindex starting
-@cindex running
-@table @code
-@item run
-@itemx r
-@kindex run
-Use the @code{run} command to start your program under _GDBN__.  You
-must first specify the program name
-_if__(_VXWORKS__) 
-(except on VxWorks)
-_fi__(_VXWORKS__)
-with an argument to _GDBN__
-(@pxref{Invocation}), or using the @code{file} or @code{exec-file}
-command (@pxref{Files}).  
-@refill
-@end table
-
-On targets that support processes, @code{run} creates an inferior
-process and makes that process run your program.  On other targets,
-@code{run} jumps to the start of the program.
-
-The execution of a program is affected by certain information it
-receives from its superior.  _GDBN__ provides ways to specify this
-information, which you must do @i{before} starting the program.  (You
-can change it after starting the program, but such changes will only affect
-the program the next time you start it.)  This information may be
-divided into four categories:
-
-@table @asis
-@item The @i{arguments.}
-You specify the arguments to give your program as the arguments of the
-@code{run} command.  If a shell is available on your target, the shell
-is used to pass the arguments, so that you may use normal conventions
-(such as wildcard expansion or variable substitution) in
-describing the arguments.  In Unix systems, you can control which shell
-is used with the @code{SHELL} environment variable. @xref{Arguments}.@refill
-
-@item The @i{environment.}
-Your program normally inherits its environment from _GDBN__, but you can
-use the _GDBN__ commands @code{set environment} and @code{unset
-environment} to change parts of the environment that will be given to
-the program.  @xref{Environment}.@refill
-
-@item The @i{working directory.}
-Your program inherits its working directory from _GDBN__.  You can set
-_GDBN__'s working directory with the @code{cd} command in _GDBN__.
-@xref{Working Directory}.
-
-@item The @i{standard input and output.}
-Your program normally uses the same device for standard input and
-standard output as _GDBN__ is using.  You can redirect input and output
-in the @code{run} command line, or you can use the @code{tty} command to
-set a different device for your program.
-@xref{Input/Output}.
-
-@cindex pipes
-@emph{Warning:} While input and output redirection work, you can't use
-pipes to pass the output of the program you're debugging to another
-program; if you attempt this, _GDBN__ is likely to wind up debugging the
-wrong program.
-@end table
-
-When you issue the @code{run} command, your program begins to execute
-immediately.  @xref{Stopping}, for discussion of how to arrange for your
-program to stop.  Once your program has been started by the @code{run}
-command (and then stopped), you may evaluate expressions that involve
-calls to functions in the inferior, using the @code{print} or
-@code{call} commands.  @xref{Data}.
-
-If the modification time of your symbol file has changed since the last
-time _GDBN__ read its symbols, _GDBN__ will discard its symbol table and re-read
-it.  In this process, it tries to retain your current breakpoints.
-
-@node Arguments, Environment, Starting, Running
-@section Your Program's Arguments
-
-@cindex arguments (to your program)
-The arguments to your program can be specified by the arguments of the
-@code{run} command.  They are passed to a shell, which expands wildcard
-characters and performs redirection of I/O, and thence to the program.
-_GDBN__ uses the shell indicated by your environment variable
-@code{SHELL} if it exists; otherwise, _GDBN__ uses @code{/bin/sh}.
-
-@code{run} with no arguments uses the same arguments used by the previous
-@code{run}, or those set by the @code{set args} command.
-
-@kindex set args
-@table @code
-@item set args
-Specify the arguments to be used the next time your program is run.  If
-@code{set args} has no arguments, @code{run} will execute your program
-with no arguments.  Once you have run your program with arguments, 
-using @code{set args} before the next @code{run} is the only way to run
-it again without arguments.
-
-@item show args
-@kindex show args
-Show the arguments to give your program when it is started.
-@end table
-
-@node Environment, Working Directory, Arguments, Running
-@section Your Program's Environment
-
-@cindex environment (of your program)
-The @dfn{environment} consists of a set of environment variables and
-their values.  Environment variables conventionally record such things as
-your user name, your home directory, your terminal type, and your search
-path for programs to run.  Usually you set up environment variables with
-the shell and they are inherited by all the other programs you run.  When
-debugging, it can be useful to try running the program with a modified
-environment without having to start _GDBN__ over again.
-
-@table @code
-@item path @var{directory}
-@kindex path
-Add @var{directory} to the front of the @code{PATH} environment variable
-(the search path for executables), for both _GDBN__ and your program.
-You may specify several directory names, separated by @samp{:} or
-whitespace.  If @var{directory} is already in the path, it is moved to
-the front, so it will be searched sooner.  
-
-You can use the string @samp{$cwd} to refer to whatever is the current
-working directory at the time _GDBN__ searches the path.  If you use
-@samp{.} instead, it refers to the directory where you executed the
-@code{path} command.  _GDBN__ fills in the current path where needed in
-the @var{directory} argument, before adding it to the search path.
-@c 'path' is explicitly nonrepeatable, but RMS points out it's silly to
-@c document that, since repeating it would be a no-op.
-
-@item show paths
-@kindex show paths
-Display the list of search paths for executables (the @code{PATH}
-environment variable).
-
-@item show environment @r{[}@var{varname}@r{]}
-@kindex show environment
-Print the value of environment variable @var{varname} to be given to
-your program when it starts.  If you don't supply @var{varname}, 
-print the names and values of all environment variables to be given to
-your program.  You can abbreviate @code{environment} as @code{env}.
-
-@item set environment @var{varname} @r{[}=@r{]} @var{value}
-@kindex set environment
-Sets environment variable @var{varname} to @var{value}.  The value
-changes for your program only, not for _GDBN__ itself.  @var{value} may
-be any string; the values of environment variables are just strings, and
-any interpretation is supplied by your program itself.  The @var{value}
-parameter is optional; if it is eliminated, the variable is set to a
-null value.
-@c "any string" here doesn't include leading, trailing
-@c blanks. Gnu asks: does anyone care?
-
-For example, this command:
-
-@example
-set env USER = foo
-@end example
-
-@noindent
-tells a Unix program, when subsequently run, that its user is named
-@samp{foo}.  (The spaces around @samp{=} are used for clarity here; they
-are not actually required.)
-
-@item unset environment @var{varname}
-@kindex unset environment
-Remove variable @var{varname} from the environment to be passed to your
-program.  This is different from @samp{set env @var{varname} =};
-@code{unset environment} removes the variable from the environment,
-rather than assigning it an empty value.  
-@end table
-
-@node Working Directory, Input/Output, Environment, Running
-@section Your Program's Working Directory
-
-@cindex working directory (of your program)
-Each time you start your program with @code{run}, it inherits its
-working directory from the current working directory of _GDBN__.  _GDBN__'s
-working directory is initially whatever it inherited from its parent
-process (typically the shell), but you can specify a new working
-directory in _GDBN__ with the @code{cd} command.
-
-The _GDBN__ working directory also serves as a default for the commands
-that specify files for _GDBN__ to operate on.  @xref{Files}.
-
-@table @code
-@item cd @var{directory}
-@kindex cd
-Set _GDBN__'s working directory to @var{directory}.
-
-@item pwd
-@kindex pwd
-Print _GDBN__'s working directory.
-@end table
-
-@node Input/Output, Attach, Working Directory, Running
-@section Your Program's Input and Output
-
-@cindex redirection
-@cindex i/o
-@cindex terminal
-By default, the program you run under _GDBN__ does input and output to
-the same terminal that _GDBN__ uses.  _GDBN__ switches the terminal to
-its own terminal modes to interact with you, but it records the terminal
-modes your program was using and switches back to them when you continue
-running your program.
-
-@table @code
-@item info terminal
-@kindex info terminal
-Displays _GDBN__'s recorded information about the terminal modes your
-program is using.
-@end table
-
-You can redirect the program's input and/or output using shell
-redirection with the @code{run} command.  For example,
-
-_0__@example
-run > outfile
-_1__@end example
-
-@noindent
-starts the program, diverting its output to the file @file{outfile}.
-
-@kindex tty
-@cindex controlling terminal
-Another way to specify where the program should do input and output is
-with the @code{tty} command.  This command accepts a file name as
-argument, and causes this file to be the default for future @code{run}
-commands.  It also resets the controlling terminal for the child
-process, for future @code{run} commands.  For example,
-
-@example
-tty /dev/ttyb
-@end example
-
-@noindent
-directs that processes started with subsequent @code{run} commands
-default to do input and output on the terminal @file{/dev/ttyb} and have
-that as their controlling terminal.
-
-An explicit redirection in @code{run} overrides the @code{tty} command's
-effect on the input/output device, but not its effect on the controlling
-terminal.
-
-When you use the @code{tty} command or redirect input in the @code{run}
-command, only the input @emph{for your program} is affected.  The input
-for _GDBN__ still comes from your terminal.
-
-@node Attach, Kill Process, Input/Output, Running
-@section Debugging an Already-Running Process
-@kindex attach
-@cindex attach
-
-@table @code
-@item attach @var{process-id}
-This command
-attaches to a running process---one that was started outside _GDBN__.
-(@code{info files} will show your active targets.)  The command takes as
-argument a process ID.  The usual way to find out the process-id of
-a Unix process is with the @code{ps} utility, or with the @samp{jobs -l}
-shell command.   
-
-@code{attach} will not repeat if you press @key{RET} a second time after
-executing the command.
-@end table
-
-To use @code{attach}, you must be debugging in an environment which
-supports processes.  You must also have permission to send the process a
-signal, and it must have the same effective user ID as the _GDBN__
-process.
-
-When using @code{attach}, you should first use the @code{file} command
-to specify the program running in the process and load its symbol table.
-@xref{Files}.
-
-The first thing _GDBN__ does after arranging to debug the specified
-process is to stop it.  You can examine and modify an attached process
-with all the _GDBN__ commands that are ordinarily available when you start
-processes with @code{run}.  You can insert breakpoints; you can step and
-continue; you can modify storage.  If you would rather the process
-continue running, you may use the @code{continue} command after
-attaching _GDBN__ to the process.
-
-@table @code
-@item detach
-@kindex detach
-When you have finished debugging the attached process, you can use the
-@code{detach} command to release it from _GDBN__'s control.  Detaching
-the process continues its execution.  After the @code{detach} command,
-that process and _GDBN__ become completely independent once more, and you
-are ready to @code{attach} another process or start one with @code{run}.
-@code{detach} will not repeat if you press @key{RET} again after
-executing the command.
-@end table
-
-If you exit _GDBN__ or use the @code{run} command while you have an attached
-process, you kill that process.  By default, you will be asked for
-confirmation if you try to do either of these things; you can control
-whether or not you need to confirm by using the @code{set confirm} command
-(@pxref{Messages/Warnings}).
-
-@node Kill Process,  , Attach, Running
-@c @group
-@section Killing the Child Process
-
-@table @code
-@item kill
-@kindex kill
-Kill the child process in which your program is running under _GDBN__.
-@end table
-
-This command is useful if you wish to debug a core dump instead of a
-running process.  _GDBN__ ignores any core dump file while your program
-is running.
-@c @end group
-
-On some operating systems, a program can't be executed outside _GDBN__
-while you have breakpoints set on it inside _GDBN__.  You can use the
-@code{kill} command in this situation to permit running the program
-outside the debugger.
-
-The @code{kill} command is also useful if you wish to recompile and
-relink the program, since on many systems it is impossible to modify an
-executable file while it is running in a process.  In this case, when you
-next type @code{run}, _GDBN__ will notice that the file has changed, and
-will re-read the symbol table (while trying to preserve your current
-breakpoint settings).
-
-@node Stopping, Stack, Running, Top
-@chapter Stopping and Continuing
-
-The principal purpose of using a debugger is so that you can stop your
-program before it terminates; or so that, if the program runs into
-trouble, you can investigate and find out why.
-
-Inside _GDBN__, your program may stop for any of several reasons, such
-as a signal, a breakpoint, or reaching a new line after a _GDBN__
-command such as @code{step}.  You may then examine and change
-variables, set new breakpoints or remove old ones, and then continue
-execution.  Usually, the messages shown by _GDBN__ provide ample
-explanation of the status of your program---but you can also explicitly
-request this information at any time.
-
-@table @code
-@item info program
-@kindex info program
-Display information about the status of your program: whether it is
-running or not, what process it is, and why it stopped.
-@end table
-
-@menu
-* Breakpoints::                 Breakpoints, Watchpoints, and Exceptions
-* Continuing and Stepping::     Resuming Execution
-* Signals::                     Signals
-@end menu
-
-@node Breakpoints, Continuing and Stepping, Stopping, Stopping
-@section Breakpoints, Watchpoints, and Exceptions
-
-@cindex breakpoints
-A @dfn{breakpoint} makes your program stop whenever a certain point in
-the program is reached.  For each breakpoint, you can add various
-conditions to control in finer detail whether the program will stop.
-You can set breakpoints with the @code{break} command and its variants
-(@pxref{Set Breaks}), to specify the place where the program should stop
-by line number, function name or exact address in the program.  In
-languages with exception handling (such as GNU C++), you can also set
-breakpoints  where an exception is raised (@pxref{Exception Handling}).
-
-@cindex watchpoints
-A @dfn{watchpoint} is a special breakpoint that stops your program when
-the value of an expression changes.  You must use a different command to
-set watchpoints (@pxref{Set Watchpoints}), but aside from that, you can
-manage a watchpoint like any other breakpoint: you enable, disable, and
-delete both breakpoints and watchpoints using the same commands.
-
-Each breakpoint or watchpoint is assigned a number when it is created;
-these numbers are successive integers starting with one.  In many of the
-commands for controlling various features of breakpoints you use the
-breakpoint number to say which breakpoint you want to change.  Each
-breakpoint may be @dfn{enabled} or @dfn{disabled}; if disabled, it has
-no effect on the program until you enable it again.
-
-@menu
-* Set Breaks::                  Setting Breakpoints
-* Set Watchpoints::             Setting Watchpoints
-* Exception Handling::          Breakpoints and Exceptions
-* Delete Breaks::               Deleting Breakpoints
-* Disabling::                   Disabling Breakpoints
-* Conditions::                  Break Conditions
-* Break Commands::              Breakpoint Command Lists
-* Breakpoint Menus::            Breakpoint Menus
-* Error in Breakpoints::        
-@end menu
-
-@node Set Breaks, Set Watchpoints, Breakpoints, Breakpoints
-@subsection Setting Breakpoints
-
-@kindex break
-@kindex b
-Breakpoints are set with the @code{break} command (abbreviated @code{b}).
-
-You have several ways to say where the breakpoint should go.
-
-@table @code
-@item break @var{function}
-Set a breakpoint at entry to function @var{function}.  When using source
-languages that permit overloading of symbols, such as C++,
-@var{function} may refer to more than one possible place to break.
-@xref{Breakpoint Menus}, for a discussion of that situation.
-
-@item break +@var{offset}
-@itemx break -@var{offset}
-Set a breakpoint some number of lines forward or back from the position
-at which execution stopped in the currently selected frame.
-
-@item break @var{linenum}
-Set a breakpoint at line @var{linenum} in the current source file.
-That file is the last file whose source text was printed.  This
-breakpoint will stop the program just before it executes any of the
-code on that line.
-
-@item break @var{filename}:@var{linenum}
-Set a breakpoint at line @var{linenum} in source file @var{filename}.
-
-@item break @var{filename}:@var{function}
-Set a breakpoint at entry to function @var{function} found in file
-@var{filename}.  Specifying a file name as well as a function name is
-superfluous except when multiple files contain similarly named
-functions.
-
-@item break *@var{address}
-Set a breakpoint at address @var{address}.  You can use this to set
-breakpoints in parts of the program which do not have debugging
-information or source files.
-
-@item break
-When called without any arguments, @code{break} sets a breakpoint at the
-next instruction to be executed in the selected stack frame
-(@pxref{Stack}).  In any selected frame but the innermost, this will
-cause the program to stop as soon as control returns to that frame.
-This is similar to the effect of a @code{finish} command in the frame
-inside the selected frame---except that @code{finish} doesn't leave an
-active breakpoint.  If you use @code{break} without an argument in the
-innermost frame, _GDBN__ will stop the next time it reaches the current
-location; this may be useful inside loops.
-
-_GDBN__ normally ignores breakpoints when it resumes execution, until at
-least one instruction has been executed.  If it did not do this, you
-would be unable to proceed past a breakpoint without first disabling the
-breakpoint.  This rule applies whether or not the breakpoint already
-existed when the program stopped.
-
-@item break @dots{} if @var{cond}
-Set a breakpoint with condition @var{cond}; evaluate the expression
-@var{cond} each time the breakpoint is reached, and stop only if the
-value is nonzero---that is, if @var{cond} evaluates as true.
-@samp{@dots{}} stands for one of the possible arguments described above
-(or no argument) specifying where to break.  @xref{Conditions}, for more
-information on breakpoint conditions.
-
-@item tbreak @var{args}
-@kindex tbreak
-Set a breakpoint enabled only for one stop.  @var{args} are the
-same as for the @code{break} command, and the breakpoint is set in the same
-way, but the breakpoint is automatically disabled the first time it
-is hit.  @xref{Disabling}.
-
-@item rbreak @var{regex}
-@kindex rbreak
-@cindex regular expression
-Set breakpoints on all functions matching the regular expression
-@var{regex}.  This command
-sets an unconditional breakpoint on all matches, printing a list of all
-breakpoints it set. Once these breakpoints are set, they are treated
-just like the breakpoints set with the @code{break} command.  They can
-be deleted, disabled, made conditional, etc., in the standard ways.
-
-When debugging C++ programs, @code{rbreak} is useful for setting
-breakpoints on overloaded functions that are not members of any special
-classes.
-
-@kindex info breakpoints
-@cindex @code{$_} and @code{info breakpoints}
-@item info breakpoints @r{[}@var{n}@r{]}
-@item info break @r{[}@var{n}@r{]}
-Print a list of all breakpoints (but not watchpoints) set and not
-deleted, showing their numbers, where in the program they are, and any
-special features in use for them. Disabled breakpoints are included in
-the list, but marked as disabled. @code{info break} with a breakpoint
-number @var{n} as argument lists only that breakpoint.  The convenience
-variable @code{$_} and the default examining-address for the @code{x}
-command are set to the address of the last breakpoint listed
-(@pxref{Memory}).  The equivalent command for watchpoints is @code{info
-watch}. @end table
-
-_GDBN__ allows you to set any number of breakpoints at the same place in the
-program.  There is nothing silly or meaningless about this.  When the
-breakpoints are conditional, this is even useful (@pxref{Conditions}).
-
-@node Set Watchpoints, Exception Handling, Set Breaks, Breakpoints
-@subsection Setting Watchpoints
-@cindex setting watchpoints
-You can use a watchpoint to stop execution whenever the value of an
-expression changes, without having to predict a particular place 
-where this may happen.
-
-Watchpoints currently execute two orders of magnitude more slowly than
-other breakpoints, but this can well be worth it to catch errors where
-you have no clue what part of your program is the culprit.  Some
-processors provide special hardware to support watchpoint evaluation; future
-releases of _GDBN__ will use such hardware if it is available.
-
-@table @code
-@kindex watch 
-@item watch @var{expr}
-Set a watchpoint for an expression.
-
-@kindex info watchpoints
-@item info watchpoints
-This command prints a list of watchpoints; it is otherwise similar to
-@code{info break}.
-@end table
-
-@node Exception Handling, Delete Breaks, Set Watchpoints, Breakpoints
-@subsection Breakpoints and Exceptions
-@cindex exception handlers
-
-Some languages, such as GNU C++, implement exception handling.  You can
-use _GDBN__ to examine what caused the program to raise an exception,
-and to list the exceptions the program is prepared to handle at a
-given point in time.
-
-@table @code
-@item catch @var{exceptions}
-@kindex catch
-You can set breakpoints at active exception handlers by using the
-@code{catch} command.  @var{exceptions} is a list of names of exceptions
-to catch.
-@end table
-
-You can use @code{info catch} to list active exception handlers;
-@pxref{Frame Info}.
-
-There are currently some limitations to exception handling in _GDBN__.
-These will be corrected in a future release.
-
-@itemize @bullet
-@item
-If you call a function interactively, _GDBN__ normally returns
-control to you when the function has finished executing.  If the call
-raises an exception, however, the call may bypass the mechanism that
-returns control to the user and cause the program to simply continue
-running until it hits a breakpoint, catches a signal that _GDBN__ is
-listening for, or exits.
-@item
-You cannot raise an exception interactively.
-@item
-You cannot interactively install an exception handler.
-@end itemize
-
-@cindex raise exceptions
-Sometimes @code{catch} is not the best way to debug exception handling:
-if you need to know exactly where an exception is raised, it's better to
-stop @emph{before} the exception handler is called, since that way you
-can see the stack before any unwinding takes place.  If you set a
-breakpoint in an exception handler instead, it may not be easy to find
-out where the exception was raised.
-
-To stop just before an exception handler is called, you need some
-knowledge of the implementation.  In the case of GNU C++, exceptions are
-raised by calling a library function named @code{__raise_exception}
-which has the following ANSI C interface:
-
-@example
-    /* @var{addr} is where the exception identifier is stored.
-       ID is the exception identifier.  */
-    void __raise_exception (void **@var{addr}, void *@var{id});
-@end example
-
-@noindent
-To make the debugger catch all exceptions before any stack
-unwinding takes place, set a breakpoint on @code{__raise_exception}
-(@pxref{Breakpoints}).  
-
-With a conditional breakpoint (@xref{Conditions}) that depends on the
-value of @var{id}, you can stop your program when a specific exception
-is raised.  You can use multiple conditional breakpoints to stop the
-program when any of a number of exceptions are raised.
-
-@node Delete Breaks, Disabling, Exception Handling, Breakpoints
-@subsection Deleting Breakpoints
-
-@cindex clearing breakpoints, watchpoints
-@cindex deleting breakpoints, watchpoints
-It is often necessary to eliminate a breakpoint or watchpoint once it
-has done its job and you no longer want the program to stop there.  This
-is called @dfn{deleting} the breakpoint.  A breakpoint that has been
-deleted no longer exists; it is forgotten.
-
-With the @code{clear} command you can delete breakpoints according to
-where they are in the program.  With the @code{delete} command you can
-delete individual breakpoints or watchpoints by specifying their
-breakpoint numbers.
-
-It is not necessary to delete a breakpoint to proceed past it.  _GDBN__
-automatically ignores breakpoints on the first instruction to be executed
-when you continue execution without changing the execution address.
-
-@table @code
-@item clear
-@kindex clear
-Delete any breakpoints at the next instruction to be executed in the
-selected stack frame (@pxref{Selection}).  When the innermost frame
-is selected, this is a good way to delete a breakpoint that the program
-just stopped at.
-
-@item clear @var{function}
-@itemx clear @var{filename}:@var{function}
-Delete any breakpoints set at entry to the function @var{function}.
-
-@item clear @var{linenum}
-@itemx clear @var{filename}:@var{linenum}
-Delete any breakpoints set at or within the code of the specified line.
-
-@item delete @r{[}breakpoints@r{]} @r{[}@var{bnums}@dots{}@r{]}
-@cindex delete breakpoints
-@kindex delete
-@kindex d
-Delete the breakpoints or watchpoints of the numbers specified as
-arguments.  If no argument is specified, delete all breakpoints (_GDBN__
-asks confirmation, unless you've @code{set confirm off}).  You
-can abbreviate this command as @code{d}.
-@end table
-
-@node Disabling, Conditions, Delete Breaks, Breakpoints
-@subsection Disabling Breakpoints
-
-@cindex disabled breakpoints
-@cindex enabled breakpoints
-Rather than deleting a breakpoint or watchpoint, you might prefer to
-@dfn{disable} it.  This makes the breakpoint inoperative as if it had
-been deleted, but remembers the information on the breakpoint so that
-you can @dfn{enable} it again later.
-
-You disable and enable breakpoints and watchpoints with the
-@code{enable} and @code{disable} commands, optionally specifying one or
-more breakpoint numbers as arguments.  Use @code{info break} or
-@code{info watch} to print a list of breakpoints or watchpoints if you
-don't know which numbers to use.
-
-A breakpoint or watchpoint can have any of four different states of
-enablement:
-
-@itemize @bullet
-@item
-Enabled.  The breakpoint will stop the program.  A breakpoint set
-with the @code{break} command starts out in this state.
-@item
-Disabled.  The breakpoint has no effect on the program.
-@item
-Enabled once.  The breakpoint will stop the program, but
-when it does so it will become disabled.  A breakpoint set
-with the @code{tbreak} command starts out in this state.
-@item
-Enabled for deletion.  The breakpoint will stop the program, but
-immediately after it does so it will be deleted permanently.
-@end itemize
-
-You can use the following commands to enable or disable breakpoints and
-watchpoints:
-
-@table @code
-@item disable @r{[}breakpoints@r{]} @r{[}@var{bnums}@dots{}@r{]}
-@kindex disable breakpoints
-@kindex disable
-@kindex dis
-Disable the specified breakpoints---or all breakpoints, if none are
-listed.  A disabled breakpoint has no effect but is not forgotten.  All
-options such as ignore-counts, conditions and commands are remembered in
-case the breakpoint is enabled again later.  You may abbreviate
-@code{disable} as @code{dis}.
-
-@item enable @r{[}breakpoints@r{]} @r{[}@var{bnums}@dots{}@r{]}
-@kindex enable breakpoints
-@kindex enable
-Enable the specified breakpoints (or all defined breakpoints).  They
-become effective once again in stopping the program.
-
-@item enable @r{[}breakpoints@r{]} once @var{bnums}@dots{}
-Enable the specified breakpoints temporarily.  Each will be disabled
-again the next time it stops the program.
-
-@item enable @r{[}breakpoints@r{]} delete @var{bnums}@dots{}
-Enable the specified breakpoints to work once and then die.  Each of
-the breakpoints will be deleted the next time it stops the program.
-@end table
-
-Save for a breakpoint set with @code{tbreak} (@pxref{Set Breaks}),
-breakpoints that you set are initially enabled; subsequently, they become
-disabled or enabled only when you use one of the commands above.  (The
-command @code{until} can set and delete a breakpoint of its own, but it
-will not change the state of your other breakpoints;
-@pxref{Continuing and Stepping}.)
-
-@node Conditions, Break Commands, Disabling, Breakpoints
-@subsection Break Conditions
-@cindex conditional breakpoints
-@cindex breakpoint conditions
-
-The simplest sort of breakpoint breaks every time the program reaches a
-specified place.  You can also specify a @dfn{condition} for a
-breakpoint.  A condition is just a Boolean expression in your
-programming language.  (@xref{Expressions}).  A breakpoint with a condition
-evaluates the expression each time the program reaches it, and the
-program stops only if the condition is @emph{true}.
-
-This is the converse of using assertions for program validation; in that
-situation, you want to stop when the assertion is violated---that is,
-when the condition is false.  In C, if you want to test an assertion expressed
-by the condition @var{assert}, you should set the condition 
-@samp{! @var{assert}} on the appropriate breakpoint.
-
-Conditions are also accepted for watchpoints; you may not need them,
-since a watchpoint is inspecting the value of an expression anyhow---but
-it might be simpler, say, to just set a watchpoint on a variable name,
-and specify a condition that tests whether the new value is an interesting
-one. 
-
-Break conditions ca have side effects, and may even call functions in
-your program.  This can be useful, for example, to activate functions
-that log program progress, or to use your own print functions to format
-special data structures. The effects are completely predictable unless
-there is another enabled breakpoint at the same address.  (In that
-case, _GDBN__ might see the other breakpoint first and stop the program
-without checking the condition of this one.)  Note that breakpoint
-commands are usually more convenient and flexible for the purpose of
-performing side effects when a breakpoint is reached 
-(@pxref{Break Commands}).
-
-Break conditions can be specified when a breakpoint is set, by using
-@samp{if} in the arguments to the @code{break} command.  @xref{Set Breaks}.
-They can also be changed at any time with the @code{condition} command.
-The @code{watch} command doesn't recognize the @code{if} keyword;
-@code{condition} is the only way to impose a further condition on a
-watchpoint. 
-
-@table @code 
-@item condition @var{bnum} @var{expression} 
-@kindex condition 
-Specify @var{expression} as the break condition for breakpoint or
-watchpoint number @var{bnum}.  From now on, this breakpoint will stop
-the program only if the value of @var{expression} is true (nonzero, in
-C).  When you use @code{condition}, _GDBN__ checks @var{expression}
-immediately for syntactic correctness, and to determine whether symbols
-in it have referents in the context of your breakpoint.  _GDBN__ does
-not actually evaluate @var{expression} at the time the @code{condition}
-command is given, however.  @xref{Expressions}.
-
-@item condition @var{bnum}
-Remove the condition from breakpoint number @var{bnum}.  It becomes
-an ordinary unconditional breakpoint.
-@end table
-
-@cindex ignore count (of breakpoint)
-A special case of a breakpoint condition is to stop only when the
-breakpoint has been reached a certain number of times.  This is so
-useful that there is a special way to do it, using the @dfn{ignore
-count} of the breakpoint.  Every breakpoint has an ignore count, which
-is an integer.  Most of the time, the ignore count is zero, and
-therefore has no effect.  But if the program reaches a breakpoint whose
-ignore count is positive, then instead of stopping, it just decrements
-the ignore count by one and continues.  As a result, if the ignore count
-value is @var{n}, the breakpoint will not stop the next @var{n} times it
-is reached.
-
-@table @code
-@item ignore @var{bnum} @var{count}
-@kindex ignore
-Set the ignore count of breakpoint number @var{bnum} to @var{count}.
-The next @var{count} times the breakpoint is reached, your program's
-execution will not stop; other than to decrement the ignore count, _GDBN__
-takes no action.
-
-To make the breakpoint stop the next time it is reached, specify
-a count of zero.
-
-@item continue @var{count}
-@itemx c @var{count}
-@itemx fg @var{count}
-@kindex continue @var{count}
-Continue execution of the program, setting the ignore count of the
-breakpoint that the program stopped at to @var{count} minus one.
-Thus, the program will not stop at this breakpoint until the
-@var{count}'th time it is reached.
-
-An argument to this command is meaningful only when the program stopped
-due to a breakpoint.  At other times, the argument to @code{continue} is
-ignored.
-
-The synonym @code{fg} is provided purely for convenience, and has
-exactly the same behavior as other forms of the command.
-@end table
-
-If a breakpoint has a positive ignore count and a condition, the condition
-is not checked.  Once the ignore count reaches zero, the condition will
-be checked.
-
-You could achieve the effect of the ignore count with a
-condition such as _0__@w{@samp{$foo-- <= 0}}_1__ using a debugger convenience
-variable that is decremented each time.  @xref{Convenience Vars}.
-
-@node Break Commands, Breakpoint Menus, Conditions, Breakpoints
-@subsection Breakpoint Command Lists
-
-@cindex breakpoint commands
-You can give any breakpoint (or watchpoint) a series of commands to
-execute when the program stops due to that breakpoint.  For example, you
-might want to print the values of certain expressions, or enable other
-breakpoints.
-
-@table @code
-@item commands @r{[}@var{bnum}@r{]}
-@itemx @dots{} @var{command-list} @dots{}
-@itemx end
-@kindex commands
-@kindex end
-Specify a list of commands for breakpoint number @var{bnum}.  The commands
-themselves appear on the following lines.  Type a line containing just
-@code{end} to terminate the commands.
-
-To remove all commands from a breakpoint, type @code{commands} followed
-immediately by @code{end}; that is, give no commands.
-
-With no @var{bnum} argument, @code{commands} refers to the last
-breakpoint or watchpoint set (not to the breakpoint most recently
-encountered).
-@end table
-
-Pressing @key{RET} as a means of repeating the last _GDBN__ command is
-disabled within a @var{command-list}.
-
-You can use breakpoint commands to start the program up again.  Simply
-use the @code{continue} command, or @code{step}, or any other command
-that resumes execution.  Subsequent commands in the command list are
-ignored.
-
-@kindex silent
-If the first command specified is @code{silent}, the usual message about
-stopping at a breakpoint is not printed.  This may be desirable for
-breakpoints that are to print a specific message and then continue.
-If the remaining commands too print nothing, you will see no sign that
-the breakpoint was reached at all.  @code{silent} is meaningful only 
-at the beginning of a breakpoint command list.
-
-The commands @code{echo} and @code{output} that allow you to print precisely
-controlled output are often useful in silent breakpoints.  @xref{Output}.
-
-For example, here is how you could use breakpoint commands to print the
-value of @code{x} at entry to @code{foo} whenever @code{x} is positive.
-
-_0__@example
-break foo if x>0
-commands
-silent
-echo x is\040
-output x
-echo \n
-cont
-end
-_1__@end example
-
-One application for breakpoint commands is to compensate for one bug so
-you can test for another.  Put a breakpoint just after the erroneous line
-of code, give it a condition to detect the case in which something
-erroneous has been done, and give it commands to assign correct values
-to any variables that need them.  End with the @code{continue} command
-so that the program does not stop, and start with the @code{silent}
-command so that no output is produced.  Here is an example:
-
-@example
-break 403
-commands
-silent
-set x = y + 4
-cont
-end
-@end example
-
-@cindex lost output
-One deficiency in the operation of automatically continuing breakpoints
-under Unix appears when your program uses raw mode for the terminal.
-_GDBN__ switches back to its own terminal modes (not raw) before executing
-commands, and then must switch back to raw mode when your program is
-continued.  This causes any pending terminal input to be lost. 
-@c FIXME: revisit below when GNU sys avail.
-@c In the GNU system, this will be fixed by changing the behavior of
-@c terminal modes.
-
-Under Unix, you can get around this problem by writing actions into
-the breakpoint condition rather than in commands.  For example
-
-@example
-condition 5  (x = y + 4), 0
-@end example
-
-@noindent
-specifies a condition expression (@xref{Expressions}) that will change
-@code{x} as needed, then always have the value zero so the program will
-not stop.  No input is lost here, because _GDBN__ evaluates break
-conditions  without changing the terminal modes.  When you want to have
-nontrivial conditions for performing the side effects, the operators
-@samp{&&}, @samp{||} and @samp{?@dots{}:} may be useful.
-
-@node Breakpoint Menus, Error in Breakpoints, Break Commands, Breakpoints
-@subsection Breakpoint Menus
-@cindex overloading
-@cindex symbol overloading 
-
-Some programming languages (notably C++) permit a single function name
-to be defined several times, for application in different contexts.
-This is called @dfn{overloading}.  When a function name is overloaded,
-@samp{break @var{function}} is not enough to tell _GDBN__ where you
-want a breakpoint.  _GDBN__ offers you a menu of numbered choices for
-different possible breakpoints, and waits for your selection with the
-prompt @samp{>}.  The first two options are always @samp{[0] cancel}
-and @samp{[1] all}.  Typing @kbd{1} sets a breakpoint at each
-definition of @var{function}, and typing @kbd{0} aborts the
-@code{break} command without setting any new breakpoints.
-
-For example, the following session excerpt shows an attempt to set a
-breakpoint at the overloaded symbol @code{String::after}.  
-We choose three particular definitions of that function name:
-
-@example
-(_GDBP__) b String::after
-[0] cancel
-[1] all
-[2] file:String.cc; line number:867
-[3] file:String.cc; line number:860
-[4] file:String.cc; line number:875
-[5] file:String.cc; line number:853
-[6] file:String.cc; line number:846
-[7] file:String.cc; line number:735
-> 2 4 6
-Breakpoint 1 at 0xb26c: file String.cc, line 867.
-Breakpoint 2 at 0xb344: file String.cc, line 875.
-Breakpoint 3 at 0xafcc: file String.cc, line 846.
-Multiple breakpoints were set.
-Use the "delete" command to delete unwanted breakpoints.
-(_GDBP__) 
-@end example
-
-
-@node Error in Breakpoints,  , Breakpoint Menus, Breakpoints
-@subsection ``Cannot Insert Breakpoints''
-
-@c FIXME: "cannot insert breakpoints" error, v unclear.  
-@c        Q in pending mail to Gilmore. ---pesch@cygnus.com, 26mar91
-@c        some light may be shed by looking at instances of 
-@c        ONE_PROCESS_WRITETEXT.  But error seems possible otherwise
-@c        too.  pesch, 20sep91
-Under some operating systems, breakpoints cannot be used in a program if
-any other process is running that program.  In this situation,
-attempting to run or continue a program with a breakpoint causes _GDBN__
-to stop the other process.
-
-When this happens, you have three ways to proceed:
-
-@enumerate
-@item
-Remove or disable the breakpoints, then continue.
-
-@item
-Suspend _GDBN__, and copy the file containing the program to a new name.
-Resume _GDBN__ and use the @code{exec-file} command to specify that _GDBN__
-should run the program under that name.  Then start the program again.
-
-@c FIXME: RMS commented here "Show example".  Maybe when someone
-@c explains the first FIXME: in this section...
-
-@item
-Relink the program so that the text segment is nonsharable, using the
-linker option @samp{-N}.  The operating system limitation may not apply
-to nonsharable executables.
-@end enumerate
-
-@node Continuing and Stepping, Signals, Breakpoints, Stopping
-@section Continuing and Stepping
-
-@cindex stepping
-@cindex continuing
-@cindex resuming execution
-@dfn{Continuing} means resuming program execution until your program
-completes normally.  In contrast, @dfn{stepping} means resuming program
-execution for a very limited time: one line of source code, or one
-machine instruction.  Either when continuing or when stepping, the
-program may stop even sooner, due to a breakpoint or to a signal.  (If
-due to a signal, you may want to use @code{handle}, or use @samp{signal
-0} to resume execution; @pxref{Signals}.)
-
-@table @code
-@item continue @r{[}@var{ignore-count}@r{]}
-@kindex continue
-Resume program execution, at the address where the program last stopped;
-any breakpoints set at that address are bypassed.  The optional argument
-@var{ignore-count} allows you to specify a further number of times to
-ignore a breakpoint at this location; its effect is like that of
-@code{ignore} (@pxref{Conditions}).
-
-To resume execution at a different place, you can use @code{return}
-(@pxref{Returning}) to go back to the calling function; or @code{jump}
-(@pxref{Jumping}) to go to an arbitrary location in your program.
-
-@end table
-
-A typical technique for using stepping is to set a breakpoint
-(@pxref{Breakpoints}) at the beginning of the function or the section of
-the program in which a problem is believed to lie, run the program until
-it stops at that breakpoint, and then step through the suspect area,
-examining the variables that are interesting, until you see the problem
-happen.
-
-@table @code
-@item step
-@kindex step
-@kindex s
-Continue running the program until control reaches a different source
-line, then stop it and return control to _GDBN__.  This command is
-abbreviated @code{s}.
-
-@quotation
-@emph{Warning:} If you use the @code{step} command while control is
-within a function that was compiled without debugging information,
-execution will proceed until control reaches another function.
-@end quotation
-
-@item step @var{count}
-Continue running as in @code{step}, but do so @var{count} times.  If a
-breakpoint is reached or a signal not related to stepping occurs before
-@var{count} steps, stepping stops right away.
-
-@item next @r{[}@var{count}@r{]}
-@kindex next
-@kindex n
-Continue to the next source line in the current (innermost) stack frame.
-Similar to @code{step}, but any function calls appearing within the line
-of code are executed without stopping.  Execution stops when control
-reaches a different line of code at the stack level which was executing
-when the @code{next} command was given.  This command is abbreviated
-@code{n}.
-
-An argument @var{count} is a repeat count, as for @code{step}.
-
-@code{next} within a function that lacks debugging information acts like
-@code{step}, but any function calls appearing within the code of the
-function are executed without stopping.
-
-@item finish
-@kindex finish
-Continue running until just after function in the selected stack frame
-returns.  Print the returned value (if any).
-
-Contrast this with the @code{return} command (@pxref{Returning}).
-
-@item until
-@kindex until
-@item u
-@kindex u
-Continue running until a source line past the current line, in the
-current stack frame, is reached.  This command is used to avoid single
-stepping through a loop more than once.  It is like the @code{next}
-command, except that when @code{until} encounters a jump, it
-automatically continues execution until the program counter is greater
-than the address of the jump.
-
-This means that when you reach the end of a loop after single stepping
-though it, @code{until} will cause the program to continue execution
-until the loop is exited.  In contrast, a @code{next} command at the end
-of a loop will simply step back to the beginning of the loop, which
-would force you to step through the next iteration.
-
-@code{until} always stops the program if it attempts to exit the current
-stack frame.
-
-@code{until} may produce somewhat counterintuitive results if the order
-of machine code does not match the order of the source lines.  For
-example, in the following excerpt from a debugging session, the @code{f}
-(@code{frame}) command shows that execution is stopped at line
-@code{206}; yet when we use @code{until}, we get to line @code{195}:
-
-@example
-(_GDBP__) f
-#0  main (argc=4, argv=0xf7fffae8) at m4.c:206
-206                 expand_input();
-(_GDBP__) until
-195             for ( ; argc > 0; NEXTARG) @{
-@end example
-
-This happened because, for execution efficiency, the compiler had
-generated code for the loop closure test at the end, rather than the
-start, of the loop---even though the test in a C @code{for}-loop is
-written before the body of the loop.  The @code{until} command appeared
-to step back to the beginning of the loop when it advanced to this
-expression; however, it has not really gone to an earlier
-statement---not in terms of the actual machine code.
-
-@code{until} with no argument works by means of single
-instruction stepping, and hence is slower than @code{until} with an
-argument.
-
-@item until @var{location}
-@item u @var{location}
-Continue running the program until either the specified location is
-reached, or the current stack frame returns.  @var{location}
-is any of the forms of argument acceptable to @code{break} 
-(@pxref{Set Breaks}).  This form of the command uses breakpoints, and
-hence is quicker than @code{until} without an argument.
-
-@item stepi
-@itemx si
-@kindex stepi
-@kindex si
-Execute one machine instruction, then stop and return to the debugger.
-
-It is often useful to do @samp{display/i $pc} when stepping by machine
-instructions.  This will cause the next instruction to be executed to
-be displayed automatically at each stop.  @xref{Auto Display}.
-
-An argument is a repeat count, as in @code{step}.
-
-@item nexti
-@itemx ni
-@kindex nexti
-@kindex ni
-Execute one machine instruction, but if it is a function call,
-proceed until the function returns.
-
-An argument is a repeat count, as in @code{next}.
-@end table
-
-
-@node Signals,  , Continuing and Stepping, Stopping
-@section Signals
-@cindex signals
-
-A signal is an asynchronous event that can happen in a program.  The
-operating system defines the possible kinds of signals, and gives each
-kind a name and a number.  For example, in Unix @code{SIGINT} is the
-signal a program gets when you type an interrupt (often @kbd{C-c});
-@code{SIGSEGV} is the signal a program gets from referencing a place in
-memory far away from all the areas in use; @code{SIGALRM} occurs when
-the alarm clock timer goes off (which happens only if the program has
-requested an alarm).
-
-@cindex fatal signals
-Some signals, including @code{SIGALRM}, are a normal part of the
-functioning of the program.  Others, such as @code{SIGSEGV}, indicate
-errors; these signals are @dfn{fatal} (kill the program immediately) if the
-program has not specified in advance some other way to handle the signal.
-@code{SIGINT} does not indicate an error in the program, but it is normally
-fatal so it can carry out the purpose of the interrupt: to kill the program.
-
-_GDBN__ has the ability to detect any occurrence of a signal in the program
-running under _GDBN__'s control.  You can tell _GDBN__ in advance what to do for
-each kind of signal.
-
-@cindex handling signals
-Normally, _GDBN__ is set up to ignore non-erroneous signals like @code{SIGALRM}
-(so as not to interfere with their role in the functioning of the program)
-but to stop the program immediately whenever an error signal happens.
-You can change these settings with the @code{handle} command.
-
-@table @code
-@item info signals
-@kindex info signals
-Print a table of all the kinds of signals and how _GDBN__ has been told to
-handle each one.  You can use this to see the signal numbers of all
-the defined types of signals.
-
-@item handle @var{signal} @var{keywords}@dots{}
-@kindex handle
-Change the way _GDBN__ handles signal @var{signal}.  @var{signal} can be the
-number of a signal or its name (with or without the @samp{SIG} at the
-beginning).  The @var{keywords} say what change to make.
-@end table
-
-@c @group
-The keywords allowed by the @code{handle} command can be abbreviated.
-Their full names are:
-
-@table @code
-@item nostop
-_GDBN__ should not stop the program when this signal happens.  It may
-still print a message telling you that the signal has come in.
-
-@item stop
-_GDBN__ should stop the program when this signal happens.  This implies
-the @code{print} keyword as well.
-
-@item print
-_GDBN__ should print a message when this signal happens.
-
-@item noprint
-_GDBN__ should not mention the occurrence of the signal at all.  This
-implies the @code{nostop} keyword as well.
-
-@item pass
-_GDBN__ should allow the program to see this signal; the program will be
-able to handle the signal, or may be terminated if the signal is fatal
-and not handled.
-
-@item nopass
-_GDBN__ should not allow the program to see this signal.
-@end table
-@c @end group
-
-When a signal has been set to stop the program, the program cannot see the
-signal until you continue.  It will see the signal then, if @code{pass} is
-in effect for the signal in question @i{at that time}.  In other words,
-after _GDBN__ reports a signal, you can use the @code{handle} command with
-@code{pass} or @code{nopass} to control whether that signal will be seen by
-the program when you later continue it.
-
-You can also use the @code{signal} command to prevent the program from
-seeing a signal, or cause it to see a signal it normally would not see,
-or to give it any signal at any time.  For example, if the program stopped
-due to some sort of memory reference error, you might store correct
-values into the erroneous variables and continue, hoping to see more
-execution; but the program would probably terminate immediately as
-a result of the fatal signal once it sees the signal.  To prevent this,
-you can continue with @samp{signal 0}.  @xref{Signaling}.
-
-@node Stack, Source, Stopping, Top
-@chapter Examining the Stack
-
-When your program has stopped, the first thing you need to know is where it
-stopped and how it got there.
-
-@cindex call stack
-Each time your program performs a function call, the information about
-where in the program the call was made from is saved in a block of data
-called a @dfn{stack frame}.  The frame also contains the arguments of the
-call and the local variables of the function that was called.  All the
-stack frames are allocated in a region of memory called the @dfn{call
-stack}.
-
-When your program stops, the _GDBN__ commands for examining the stack allow you
-to see all of this information.
-
-@cindex selected frame
-One of the stack frames is @dfn{selected} by _GDBN__ and many _GDBN__ commands
-refer implicitly to the selected frame.  In particular, whenever you ask
-_GDBN__ for the value of a variable in the program, the value is found in the
-selected frame.  There are special _GDBN__ commands to select whichever frame
-you are interested in.
-
-When the program stops, _GDBN__ automatically selects the currently executing
-frame and describes it briefly as the @code{frame} command does
-(@pxref{Frame Info}).
-
-@menu
-* Frames::                      Stack Frames
-* Backtrace::                   Backtraces
-* Selection::                   Selecting a Frame
-* Frame Info::                  Information on a Frame
-@end menu
-
-@node Frames, Backtrace, Stack, Stack
-@section Stack Frames
-
-@cindex frame
-@cindex stack frame
-The call stack is divided up into contiguous pieces called @dfn{stack
-frames}, or @dfn{frames} for short; each frame is the data associated
-with one call to one function.  The frame contains the arguments given
-to the function, the function's local variables, and the address at
-which the function is executing.
-
-@cindex initial frame
-@cindex outermost frame
-@cindex innermost frame
-When your program is started, the stack has only one frame, that of the
-function @code{main}.  This is called the @dfn{initial} frame or the
-@dfn{outermost} frame.  Each time a function is called, a new frame is
-made.  Each time a function returns, the frame for that function invocation
-is eliminated.  If a function is recursive, there can be many frames for
-the same function.  The frame for the function in which execution is
-actually occurring is called the @dfn{innermost} frame.  This is the most
-recently created of all the stack frames that still exist.
-
-@cindex frame pointer
-Inside your program, stack frames are identified by their addresses.  A
-stack frame consists of many bytes, each of which has its own address; each
-kind of computer has a convention for choosing one of those bytes whose
-address serves as the address of the frame.  Usually this address is kept
-in a register called the @dfn{frame pointer register} while execution is
-going on in that frame.
-
-@cindex frame number
-_GDBN__ assigns numbers to all existing stack frames, starting with
-zero for the innermost frame, one for the frame that called it,
-and so on upward.  These numbers do not really exist in your program;
-they are assigned by _GDBN__ to give you a way of designating stack
-frames in _GDBN__ commands.
-
-@cindex frameless execution
-Some compilers allow functions to be compiled so that they operate
-without stack frames.  (For example, the @code{_GCC__} option
-@samp{-fomit-frame-pointer} will generate functions without a frame.)
-This is occasionally done with heavily used library functions to save
-the frame setup time.  _GDBN__ has limited facilities for dealing with
-these function invocations.  If the innermost function invocation has no
-stack frame, _GDBN__ will nevertheless regard it as though it had a
-separate frame, which is numbered zero as usual, allowing correct
-tracing of the function call chain.  However, _GDBN__ has no provision
-for frameless functions elsewhere in the stack.
-
-@node Backtrace, Selection, Frames, Stack
-@section Backtraces
-
-A backtrace is a summary of how the program got where it is.  It shows one
-line per frame, for many frames, starting with the currently executing
-frame (frame zero), followed by its caller (frame one), and on up the
-stack.
-
-@table @code
-@item backtrace
-@itemx bt
-@kindex backtrace
-@kindex bt
-Print a backtrace of the entire stack: one line per frame for all
-frames in the stack.
-
-You can stop the backtrace at any time by typing the system interrupt
-character, normally @kbd{C-c}.
-
-@item backtrace @var{n}
-@itemx bt @var{n}
-Similar, but print only the innermost @var{n} frames.
-
-@item backtrace -@var{n}
-@itemx bt -@var{n}
-Similar, but print only the outermost @var{n} frames.
-@end table
-
-@kindex where
-@kindex info stack
-@kindex info s
-The names @code{where} and @code{info stack} (abbreviated @code{info s})
-are additional aliases for @code{backtrace}.
-
-Each line in the backtrace shows the frame number and the function name.
-The program counter value is also shown---unless you use @code{set
-print address off}.  The backtrace also shows the source file name and
-line number, as well as the arguments to the function.  The program
-counter value is omitted if it is at the beginning of the code for that
-line number.
-
-Here is an example of a backtrace.  It was made with the command
-@samp{bt 3}, so it shows the innermost three frames.
-
-@smallexample
-@group
-#0  m4_traceon (obs=0x24eb0, argc=1, argv=0x2b8c8) at builtin.c:993
-#1  0x6e38 in expand_macro (sym=0x2b600) at macro.c:242
-#2  0x6840 in expand_token (obs=0x0, t=177664, td=0xf7fffb08)
-    at macro.c:71
-(More stack frames follow...)
-@end group
-@end smallexample
-
-@noindent
-The display for frame zero doesn't begin with a program counter
-value, indicating that the program has stopped at the beginning of the
-code for line @code{993} of @code{builtin.c}.
-
-@node Selection, Frame Info, Backtrace, Stack
-@section Selecting a Frame
-
-Most commands for examining the stack and other data in the program work on
-whichever stack frame is selected at the moment.  Here are the commands for
-selecting a stack frame; all of them finish by printing a brief description
-of the stack frame just selected.
-
-@table @code
-@item frame @var{n}
-@itemx f @var{n}
-@kindex frame
-@kindex f
-Select frame number @var{n}.  Recall that frame zero is the innermost
-(currently executing) frame, frame one is the frame that called the
-innermost one, and so on.  The highest-numbered frame is @code{main}'s
-frame.
-
-@item frame @var{addr}
-@itemx f @var{addr}
-Select the frame at address @var{addr}.  This is useful mainly if the
-chaining of stack frames has been damaged by a bug, making it
-impossible for _GDBN__ to assign numbers properly to all frames.  In
-addition, this can be useful when the program has multiple stacks and
-switches between them.
-
-_if__(_SPARC__)
-On the SPARC architecture, @code{frame} needs two addresses to
-select an arbitrary frame: a frame pointer and a stack pointer.  
-@c note to future updaters: this is conditioned on a flag
-@c FRAME_SPECIFICATION_DYADIC in the tm-*.h files, currently only used
-@c by SPARC, hence the specific attribution.  Generalize or list all
-@c possibilities if more supported machines start doing this.
-_fi__(_SPARC__)
-
-@item up @var{n}
-@kindex up
-Move @var{n} frames up the stack.  For positive numbers @var{n}, this
-advances toward the outermost frame, to higher frame numbers, to frames
-that have existed longer.  @var{n} defaults to one.
-
-@item down @var{n}
-@kindex down
-@kindex do
-Move @var{n} frames down the stack.  For positive numbers @var{n}, this
-advances toward the innermost frame, to lower frame numbers, to frames
-that were created more recently.  @var{n} defaults to one.  You may
-abbreviate @code{down} as @code{do}.
-@end table
-
-All of these commands end by printing two lines of output describing the
-frame.  The first line shows the frame number, the function name, the
-arguments, and the source file and line number of execution in that
-frame.  The second line shows the text of that source line.  For
-example:
-
-@smallexample
-(_GDBP__) up
-#1  0x22f0 in main (argc=1, argv=0xf7fffbf4, env=0xf7fffbfc) at env.c:10
-10              read_input_file (argv[i]);
-@end smallexample
-
-After such a printout, the @code{list} command with no arguments will print
-ten lines centered on the point of execution in the frame.  @xref{List}.
-
-@table @code
-@item up-silently @var{n}
-@itemx down-silently @var{n}
-@kindex down-silently
-@kindex up-silently
-These two commands are variants of @code{up} and @code{down},
-respectively; they differ in that they do their work silently, without
-causing display of the new frame.  They are intended primarily for use
-in _GDBN__ command scripts, where the output might be unnecessary and
-distracting. 
-
-@end table
-
-@node Frame Info,  , Selection, Stack
-@section Information About a Frame
-
-There are several other commands to print information about the selected
-stack frame.
-
-@table @code
-@item frame
-@itemx f
-When used without any argument, this command does not change which frame
-is selected, but prints a brief description of the currently
-selected stack frame.  It can be abbreviated @code{f}.  With an
-argument, this command is used to select a stack frame (@pxref{Selection}).
-
-@item info frame
-@kindex info frame
-@itemx info f
-@kindex info f
-This command prints a verbose description of the selected stack frame,
-including the address of the frame, the addresses of the next frame down
-(called by this frame) and the next frame up (caller of this frame), the
-language that the source code corresponding to this frame was written in,
-the address of the frame's arguments, the program counter saved in it
-(the address of execution in the caller frame), and which registers
-were saved in the frame.  The verbose description is useful when
-something has gone wrong that has made the stack format fail to fit
-the usual conventions.
-
-@item info frame @var{addr}
-@itemx info f @var{addr}
-Print a verbose description of the frame at address @var{addr},
-without selecting that frame.  The selected frame remains unchanged by
-this command.
-
-@item info args
-@kindex info args
-Print the arguments of the selected frame, each on a separate line.
-
-@item info locals
-@kindex info locals
-Print the local variables of the selected frame, each on a separate
-line.  These are all variables declared static or automatic within all
-program blocks that execution in this frame is currently inside of.
-
-@item info catch
-@kindex info catch
-@cindex catch exceptions
-@cindex exception handlers
-Print a list of all the exception handlers that are active in the
-current stack frame at the current point of execution.  To see other
-exception handlers, visit the associated frame (using the @code{up},
-@code{down}, or @code{frame} commands); then type @code{info catch}.
-@xref{Exception Handling}.
-@end table
-
-@node Source, Data, Stack, Top
-@chapter Examining Source Files
-
-_GDBN__ can print parts of your program's source, since the debugging
-information recorded in your program tells _GDBN__ what source files
-were used to built it.  When your program stops, _GDBN__ spontaneously
-prints the line where it stopped.  Likewise, when you select a stack
-frame (@pxref{Selection}), _GDBN__ prints the line where execution in
-that frame has stopped.  You can print other portions of source files by
-explicit command.
-
-If you use _GDBN__ through its GNU Emacs interface, you may prefer to
-use Emacs facilities to view source; @pxref{Emacs}.
-
-@menu
-* List::                        Printing Source Lines
-* Search::                      Searching Source Files
-* Source Path::                 Specifying Source Directories
-* Machine Code::                Source and Machine Code
-@end menu
-
-@node List, Search, Source, Source
-@section Printing Source Lines
-
-@kindex list
-@kindex l
-To print lines from a source file, use the @code{list} command
-(abbreviated @code{l}).  There are several ways to specify what part
-of the file you want to print.
-
-Here are the forms of the @code{list} command most commonly used:
-
-@table @code
-@item list @var{linenum}
-Print lines centered around line number @var{linenum} in the
-current source file.
-
-@item list @var{function}
-Print lines centered around the beginning of function
-@var{function}.
-
-@item list
-Print more lines.  If the last lines printed were printed with a
-@code{list} command, this prints lines following the last lines
-printed; however, if the last line printed was a solitary line printed
-as part of displaying a stack frame (@pxref{Stack}), this prints 
-lines centered around that line.
-
-@item list -
-Print lines just before the lines last printed.
-@end table
-
-By default, _GDBN__ prints ten source lines with any of these forms of
-the @code{list} command.  You can change this using @code{set listsize}:
-
-@table @code
-@item set listsize @var{count}
-@kindex set listsize
-Make the @code{list} command display @var{count} source lines (unless
-the @code{list} argument explicitly specifies some other number).
-
-@item show listsize
-@kindex show listsize
-Display the number of lines that @code{list} will currently display by
-default. 
-@end table
-
-Repeating a @code{list} command with @key{RET} discards the argument,
-so it is equivalent to typing just @code{list}.  This is more useful
-than listing the same lines again.  An exception is made for an
-argument of @samp{-}; that argument is preserved in repetition so that
-each repetition moves up in the source file.
-
-@cindex linespec
-In general, the @code{list} command expects you to supply zero, one or two
-@dfn{linespecs}.  Linespecs specify source lines; there are several ways
-of writing them but the effect is always to specify some source line.
-Here is a complete description of the possible arguments for @code{list}:
-
-@table @code
-@item list @var{linespec}
-Print lines centered around the line specified by @var{linespec}.
-
-@item list @var{first},@var{last}
-Print lines from @var{first} to @var{last}.  Both arguments are
-linespecs.
-
-@item list ,@var{last}
-Print lines ending with @var{last}.
-
-@item list @var{first},
-Print lines starting with @var{first}.
-
-@item list +
-Print lines just after the lines last printed.
-
-@item list -
-Print lines just before the lines last printed.
-
-@item list
-As described in the preceding table.
-@end table
-
-Here are the ways of specifying a single source line---all the
-kinds of linespec.
-
-@table @code
-@item @var{number}
-Specifies line @var{number} of the current source file.
-When a @code{list} command has two linespecs, this refers to
-the same source file as the first linespec.
-
-@item +@var{offset}
-Specifies the line @var{offset} lines after the last line printed.
-When used as the second linespec in a @code{list} command that has
-two, this specifies the line @var{offset} lines down from the
-first linespec.
-
-@item -@var{offset}
-Specifies the line @var{offset} lines before the last line printed.
-
-@item @var{filename}:@var{number}
-Specifies line @var{number} in the source file @var{filename}.
-
-@item @var{function}
-@c FIXME: "of the open-brace" is C-centric.  When we add other langs...
-Specifies the line of the open-brace that begins the body of the
-function @var{function}.
-
-@item @var{filename}:@var{function}
-Specifies the line of the open-brace that begins the body of the
-function @var{function} in the file @var{filename}.  You only need the
-file name with a function name to avoid ambiguity when there are
-identically named functions in different source files.
-
-@item *@var{address}
-Specifies the line containing the program address @var{address}.
-@var{address} may be any expression.
-@end table
-
-@node Search, Source Path, List, Source
-@section Searching Source Files
-@cindex searching
-@kindex reverse-search
-
-There are two commands for searching through the current source file for a
-regular expression.
-
-@table @code
-@item forward-search @var{regexp}
-@itemx search @var{regexp}
-@kindex search
-@kindex forward-search
-The command @samp{forward-search @var{regexp}} checks each line, starting
-with the one following the last line listed, for a match for @var{regexp}.
-It lists the line that is found.  You can abbreviate the command name
-as @code{fo}.  The synonym @samp{search @var{regexp}} is also supported.
-
-@item reverse-search @var{regexp}
-The command @samp{reverse-search @var{regexp}} checks each line, starting
-with the one before the last line listed and going backward, for a match
-for @var{regexp}.  It lists the line that is found.  You can abbreviate
-this command as @code{rev}.
-@end table
-
-@node Source Path, Machine Code, Search, Source
-@section Specifying Source Directories
-
-@cindex source path
-@cindex directories for source files
-Executable programs sometimes do not record the directories of the source
-files from which they were compiled, just the names.  Even when they do,
-the directories could be moved between the compilation and your debugging
-session.  _GDBN__ has a list of directories to search for source files;
-this is called the @dfn{source path}.  Each time _GDBN__ wants a source file,
-it tries all the directories in the list, in the order they are present
-in the list, until it finds a file with the desired name.  Note that
-the executable search path is @emph{not} used for this purpose.  Neither is
-the current working directory, unless it happens to be in the source
-path.
-
-If _GDBN__ can't find a source file in the source path, and the object
-program records a directory, _GDBN__ tries that directory too.  If the
-source path is empty, and there is no record of the compilation
-directory, _GDBN__ will, as a last resort, look in the current
-directory.
-
-Whenever you reset or rearrange the source path, _GDBN__ will clear out
-any information it has cached about where source files are found, where
-each line is in the file, etc.
-
-@kindex directory
-When you start _GDBN__, its source path is empty.
-To add other directories, use the @code{directory} command.
-
-@table @code
-@item directory @var{dirname} @dots{}
-Add directory @var{dirname} to the front of the source path.  Several
-directory names may be given to this command, separated by @samp{:} or
-whitespace.  You may specify a directory that is already in the source
-path; this moves it forward, so it will be searched sooner.  
-
-You can use the string @samp{$cdir} to refer to the compilation
-directory (if one is recorded), and @samp{$cwd} to refer to the current
-working directory.  @samp{$cwd} is not the same as @samp{.}---the former
-tracks the current working directory as it changes during your _GDBN__
-session, while the latter is immediately expanded to the current
-directory at the time you add an entry to the source path.
-
-@item directory
-Reset the source path to empty again.  This requires confirmation.
-
-@c RET-repeat for @code{directory} is explicitly disabled, but since
-@c repeating it would be a no-op we don't say that.  (thanks to RMS)
-
-@item show directories
-@kindex show directories
-Print the source path: show which directories it contains.
-@end table
-
-If your source path is cluttered with directories that are no longer of
-interest, _GDBN__ may sometimes cause confusion by finding the wrong
-versions of source.  You can correct the situation as follows:
-
-@enumerate
-@item
-Use @code{directory} with no argument to reset the source path to empty.
-
-@item
-Use @code{directory} with suitable arguments to reinstall the
-directories you want in the source path.  You can add all the
-directories in one command.
-@end enumerate
-
-@node Machine Code,  , Source Path, Source
-@section Source and Machine Code
-You can use the command @code{info line} to map source lines to program
-addresses (and viceversa), and the command @code{disassemble} to display
-a range of addresses as machine instructions.
-
-@table @code
-@item info line @var{linespec}
-@kindex info line
-Print the starting and ending addresses of the compiled code for
-source line @var{linespec}.  You can specify source lines in any of the
-ways understood by the @code{list} command (@pxref{List}).
-@end table
-
-For example, we can use @code{info line} to inquire on where the object
-code for the first line of function @code{m4_changequote} lies:
-@smallexample
-(_GDBP__) info line m4_changecom
-Line 895 of "builtin.c" starts at pc 0x634c and ends at 0x6350.
-@end smallexample
-
-@noindent
-We can also inquire (using @code{*@var{addr}} as the form for
-@var{linespec}) what source line covers a particular address:
-@smallexample
-(_GDBP__) info line *0x63ff
-Line 926 of "builtin.c" starts at pc 0x63e4 and ends at 0x6404.
-@end smallexample
-
-@cindex @code{$_} and @code{info line}
-After @code{info line}, the default address for the @code{x}
-command is changed to the starting address of the line, so that
-@samp{x/i} is sufficient to begin examining the machine code
-(@pxref{Memory}).  Also, this address is saved as the value of the
-convenience variable @code{$_} (@pxref{Convenience Vars}).
-
-@table @code
-@kindex disassemble
-@item disassemble
-This specialized command is provided to dump a range of memory as
-machine instructions.  The default memory range is the function
-surrounding the program counter of the selected frame.  A single
-argument to this command is a program counter value; the function
-surrounding this value will be dumped.  Two arguments (separated by one
-or more spaces) specify a range of addresses (first inclusive, second
-exclusive) to be dumped.  
-@end table
-
-We can use @code{disassemble} to inspect the object code
-range shown in the last @code{info line} example:
-
-@smallexample
-(_GDBP__) disas 0x63e4 0x6404
-Dump of assembler code from 0x63e4 to 0x6404:
-0x63e4 <builtin_init+5340>:     ble 0x63f8 <builtin_init+5360>
-0x63e8 <builtin_init+5344>:     sethi %hi(0x4c00), %o0
-0x63ec <builtin_init+5348>:     ld [%i1+4], %o0
-0x63f0 <builtin_init+5352>:     b 0x63fc <builtin_init+5364>
-0x63f4 <builtin_init+5356>:     ld [%o0+4], %o0
-0x63f8 <builtin_init+5360>:     or %o0, 0x1a4, %o0
-0x63fc <builtin_init+5364>:     call 0x9288 <path_search>
-0x6400 <builtin_init+5368>:     nop 
-End of assembler dump.
-(_GDBP__) 
-
-@end smallexample
-
-@node Data, Languages, Source, Top
-@chapter Examining Data
-
-@cindex printing data
-@cindex examining data
-@kindex print
-@kindex inspect
-@c "inspect" isn't quite a synonym if you're using Epoch, which we don't
-@c document because it's nonstandard...  Under Epoch it displays in a
-@c different window or something like that.
-The usual way to examine data in your program is with the @code{print}
-command (abbreviated @code{p}), or its synonym @code{inspect}.  It
-evaluates and prints the value of an expression of the language your
-program is written in (@pxref{Languages}).  You type
-
-@example
-print @var{exp}
-@end example
-
-@noindent
-where @var{exp} is an expression (in the source language), and
-the value of @var{exp} is printed in a format appropriate to its data
-type.
-
-A more low-level way of examining data is with the @code{x} command.
-It examines data in memory at a specified address and prints it in a
-specified format.  @xref{Memory}.
-
-If you're interested in information about types, or about how the fields
-of a struct or class are declared, use the @code{ptype @var{exp}}
-command rather than @code{print}. @xref{Symbols}.
-
-@menu
-* Expressions::                 Expressions
-* Variables::                   Program Variables
-* Arrays::                      Artificial Arrays
-* Output formats::              Output formats
-* Memory::                      Examining Memory
-* Auto Display::                Automatic Display
-* Print Settings::              Print Settings
-* Value History::               Value History
-* Convenience Vars::            Convenience Variables
-* Registers::                   Registers
-* Floating Point Hardware::     Floating Point Hardware
-@end menu
-
-@node Expressions, Variables, Data, Data
-@section Expressions
-
-@cindex expressions
-@code{print} and many other _GDBN__ commands accept an expression and
-compute its value.  Any kind of constant, variable or operator defined
-by the programming language you are using is legal in an expression in
-_GDBN__.  This includes conditional expressions, function calls, casts
-and string constants.  It unfortunately does not include symbols defined
-by preprocessor @code{#define} commands.
-
-Because C is so widespread, most of the expressions shown in examples in
-this manual are in C.  @xref{Languages,, Using _GDBN__ with Different
-Languages}, for information on how to use expressions in other
-languages.  
-
-In this section, we discuss operators that you can use in _GDBN__
-expressions regardless of your programming language. 
-
-Casts are supported in all languages, not just in C, because it is so
-useful to cast a number into a pointer so as to examine a structure
-at that address in memory.
-@c FIXME: casts supported---Mod2 true?
-
-_GDBN__ supports these operators in addition to those of programming
-languages:
-
-@table @code
-@item @@
-@samp{@@} is a binary operator for treating parts of memory as arrays.
-@xref{Arrays}, for more information.
-
-@item ::
-@samp{::} allows you to specify a variable in terms of the file or
-function where it is defined.  @xref{Variables}.
-
-@item @{@var{type}@} @var{addr}
-Refers to an object of type @var{type} stored at address @var{addr} in
-memory.  @var{addr} may be any expression whose value is an integer or
-pointer (but parentheses are required around binary operators, just as in
-a cast).  This construct is allowed regardless of what kind of data is
-normally supposed to reside at @var{addr}.@refill
-@end table
-
-@node Variables, Arrays, Expressions, Data
-@section Program Variables
-
-The most common kind of expression to use is the name of a variable
-in your program.
-
-Variables in expressions are understood in the selected stack frame
-(@pxref{Selection}); they must either be global (or static) or be visible
-according to the scope rules of the programming language from the point of
-execution in that frame.  This means that in the function
-
-@example
-foo (a)
-     int a;
-@{
-  bar (a);
-  @{
-    int b = test ();
-    bar (b);
-  @}
-@}
-@end example
-
-@noindent
-the variable @code{a} is usable whenever the program is executing
-within the function @code{foo}, but the variable @code{b} is visible
-only while the program is executing inside the block in which @code{b}
-is declared.
-
-@cindex variable name conflict
-There is an exception: you can refer to a variable or function whose
-scope is a single source file even if the current execution point is not
-in this file.  But it is possible to have more than one such variable or
-function with the same name (in different source files).  If that happens,
-referring to that name has unpredictable effects.  If you wish, you can
-specify a variable in a particular file, using the colon-colon notation:
-
-@cindex colon-colon
-@kindex ::
-@example
-@var{file}::@var{variable}
-@end example
-
-@noindent
-Here @var{file} is the name of the source file whose variable you want.
-
-@cindex C++ scope resolution
-This use of @samp{::} is very rarely in conflict with the very similar
-use of the same notation in C++.  _GDBN__ also supports use of the C++
-scope resolution operator in _GDBN__ expressions.
-
-@cindex wrong values
-@cindex variable values, wrong
-@quotation
-@emph{Warning:} Occasionally, a local variable may appear to have the
-wrong value at certain points in a function---just after entry to the
-function, and just before exit.  You may see this problem when you're
-stepping by machine instructions.  This is because on most machines, it
-takes more than one instruction to set up a stack frame (including local
-variable definitions); if you're stepping by machine instructions,
-variables may appear to have the wrong values until the stack frame is
-completely built.  On function exit, it usually also takes more than one
-machine instruction to destroy a stack frame; after you begin stepping
-through that group of instructions, local variable definitions may be
-gone.
-@end quotation
-
-@node Arrays, Output formats, Variables, Data
-@section Artificial Arrays
-
-@cindex artificial array
-@kindex @@
-It is often useful to print out several successive objects of the
-same type in memory; a section of an array, or an array of
-dynamically determined size for which only a pointer exists in the
-program.
-
-This can be done by constructing an @dfn{artificial array} with the
-binary operator @samp{@@}.  The left operand of @samp{@@} should be
-the first element of the desired array, as an individual object.
-The right operand should be the desired length of the array.  The result is
-an array value whose elements are all of the type of the left argument.
-The first element is actually the left argument; the second element
-comes from bytes of memory immediately following those that hold the
-first element, and so on.  Here is an example.  If a program says
-
-@example
-int *array = (int *) malloc (len * sizeof (int));
-@end example
-
-@noindent
-you can print the contents of @code{array} with
-
-@example
-p *array@@len
-@end example
-
-The left operand of @samp{@@} must reside in memory.  Array values made
-with @samp{@@} in this way behave just like other arrays in terms of
-subscripting, and are coerced to pointers when used in expressions.
-Artificial arrays most often appear in expressions via the value history
-(@pxref{Value History}), after printing one out.)
-
-Sometimes the artificial array mechanism isn't quite enough; in
-moderately complex data structures, the elements of interest may not
-actually be adjacent---for example, if you're interested in the values
-of pointers in an array.  One useful work-around in this situation is to
-use a convenience variable (@pxref{Convenience Vars}) as a counter in an
-expression that prints the first interesting value, and then repeat that
-expression via @key{RET}.  For instance, suppose you have an array
-@code{dtab} of pointers to structures, and you're interested in the
-values of a field @code{fv} in each structure.  Here's an example of
-what you might type:
-@example
-set $i = 0
-p dtab[$i++]->fv
-@key{RET}
-@key{RET}
-@dots{}
-@end example
-
-@node Output formats, Memory, Arrays, Data
-@section Output formats
-
-@cindex formatted output
-@cindex output formats
-By default, _GDBN__ prints a value according to its data type.  Sometimes
-this is not what you want.  For example, you might want to print a number
-in hex, or a pointer in decimal.  Or you might want to view data in memory
-at a certain address as a character string or as an instruction.  To do
-these things, specify an @dfn{output format} when you print a value.
-
-The simplest use of output formats is to say how to print a value
-already computed.  This is done by starting the arguments of the
-@code{print} command with a slash and a format letter.  The format
-letters supported are:
-
-@table @code
-@item x
-Regard the bits of the value as an integer, and print the integer in
-hexadecimal.
-
-@item d
-Print as integer in signed decimal.
-
-@item u
-Print as integer in unsigned decimal.
-
-@item o
-Print as integer in octal.
-
-@item t
-Print as integer in binary.  The letter @samp{t} stands for ``two''.
-
-@item a
-Print as an address, both absolute in hex and as an offset from the
-nearest preceding symbol.  This format can be used to discover where (in
-what function) an unknown address is located:
-@example
-(_GDBP__) p/a 0x54320
-_0__$3 = 0x54320 <_initialize_vx+396>_1__
-@end example
-
-
-@item c
-Regard as an integer and print it as a character constant.
-
-@item f
-Regard the bits of the value as a floating point number and print
-using typical floating point syntax.
-@end table
-
-For example, to print the program counter in hex (@pxref{Registers}), type
-
-@example
-p/x $pc
-@end example
-
-@noindent
-Note that no space is required before the slash; this is because command
-names in _GDBN__ cannot contain a slash.
-
-To reprint the last value in the value history with a different format,
-you can use the @code{print} command with just a format and no
-expression.  For example, @samp{p/x} reprints the last value in hex.
-
-@node Memory, Auto Display, Output formats, Data
-@section Examining Memory
-
-@cindex examining memory
-@table @code
-@kindex x
-@item x/@var{nfu} @var{expr}
-The command @code{x} (for `examine') can be used to examine memory
-without being constrained by your program's data types.  You can specify
-the unit size @var{u} of memory to inspect, and a repeat count @var{n} of how
-many of those units to display.  @code{x} understands the formats
-@var{f} used by @code{print}; two additional formats, @samp{s} (string)
-and @samp{i} (machine instruction) can be used without specifying a unit
-size.
-@end table
-
-For example, @samp{x/3uh 0x54320} is a request to display three halfwords
-(@code{h}) of memory, formatted as unsigned decimal integers (@samp{u}),
-starting at address @code{0x54320}.  @samp{x/4xw $sp} prints the four
-words (@samp{w}) of memory above the stack pointer (here, @samp{$sp};
-@pxref{Registers}) in hexadecimal (@samp{x}).
-
-Since the letters indicating unit sizes are all distinct from the
-letters specifying output formats, you don't have to remember whether
-unit size or format comes first; either order will work.  The output
-specifications @samp{4xw} and @samp{4wx} mean exactly the same thing.
-
-After the format specification, you supply an expression for the address
-where _GDBN__ is to begin reading from memory.  The expression need not
-have a pointer value (though it may); it is always interpreted as an
-integer address of a byte of memory.  @xref{Expressions} for more
-information on expressions.
-
-These are the memory units @var{u} you can specify with the @code{x}
-command:
-
-@table @code
-@item b
-Examine individual bytes.
-
-@item h
-Examine halfwords (two bytes each).
-
-@item w
-Examine words (four bytes each).
-
-@cindex word
-Many assemblers and cpu designers still use `word' for a 16-bit quantity,
-as a holdover from specific predecessor machines of the 1970's that really
-did use two-byte words.  But more generally the term `word' has always
-referred to the size of quantity that a machine normally operates on and
-stores in its registers.  This is 32 bits for all the machines that _GDBN__
-runs on.
-
-@item g
-Examine giant words (8 bytes).
-@end table
-
-You can combine these unit specifications with any of the formats
-described for @code{print}.  @xref{Output formats}.
-
-@code{x} has two additional output specifications which derive the unit
-size from the data inspected:
-
-@table @code
-@item s
-Print a null-terminated string of characters.  Any explicitly specified
-unit size is ignored; instead, the unit is however many bytes it takes
-to reach a null character (including the null character).
-
-@item i
-Print a machine instruction in assembler syntax (or nearly).  Any
-specified unit size is ignored; the number of bytes in an instruction
-varies depending on the type of machine, the opcode and the addressing
-modes used.  The command @code{disassemble} gives an alternative way of
-inspecting machine instructions.  @xref{Machine Code}.
-@end table
-
-If you omit either the format @var{f} or the unit size @var{u}, @code{x}
-will use the same one that was used last.  If you don't use any letters
-or digits after the slash, you can omit the slash as well.
-
-You can also omit the address to examine.  Then the address used is just
-after the last unit examined.  This is why string and instruction
-formats actually compute a unit-size based on the data: so that the next
-string or instruction examined will start in the right place.  
-
-When the @code{print} command shows a value that resides in memory,
-@code{print} also sets the default address for the @code{x} command.
-@code{info line} also sets the default for @code{x}, to the address of
-the start of the machine code for the specified line 
-(@pxref{Machine Code}), 
-and @code{info breakpoints} sets it to the address of the last
-breakpoint listed (@pxref{Set Breaks}).@refill
-
-When you use @key{RET} to repeat an @code{x} command, the address
-specified previously (if any) is ignored, so that the repeated command
-examines the successive locations in memory rather than the same ones.
-
-You can examine several consecutive units of memory with one command by
-writing a repeat-count after the slash (before the format letters, if
-any).  Omitting the repeat count @var{n} displays one unit of the
-appropriate size.  The repeat count must be a decimal integer.  It has
-the same effect as repeating the @code{x} command @var{n} times except
-that the output may be more compact, with several units per line.  For
-example,
-
-@example
-x/10i $pc
-@end example
-
-@noindent
-prints ten instructions starting with the one to be executed next in the
-selected frame.  After doing this, you could print a further seven
-instructions with
-
-@example
-x/7
-@end example
-
-@noindent
----where the format and address are allowed to default.
-
-@cindex @code{$_}, @code{$__}, and value history
-The addresses and contents printed by the @code{x} command are not put
-in the value history because there is often too much of them and they
-would get in the way.  Instead, _GDBN__ makes these values available for
-subsequent use in expressions as values of the convenience variables
-@code{$_} and @code{$__}.  After an @code{x} command, the last address
-examined is available for use in expressions in the convenience variable
-@code{$_}.  The contents of that address, as examined, are available in
-the convenience variable @code{$__}.
-
-If the @code{x} command has a repeat count, the address and contents saved
-are from the last memory unit printed; this is not the same as the last
-address printed if several units were printed on the last line of output.
-
-@node Auto Display, Print Settings, Memory, Data
-@section Automatic Display
-@cindex automatic display
-@cindex display of expressions
-
-If you find that you want to print the value of an expression frequently
-(to see how it changes), you might want to add it to the @dfn{automatic
-display list} so that _GDBN__ will print its value each time the program stops.
-Each expression added to the list is given a number to identify it;
-to remove an expression from the list, you specify that number.
-The automatic display looks like this:
-
-@example
-2: foo = 38
-3: bar[5] = (struct hack *) 0x3804
-@end example
-
-@noindent
-showing item numbers, expressions and their current values.  As with
-displays you request manually using @code{x} or @code{print}, you can
-specify the output format you prefer; in fact, @code{display} decides
-whether to use @code{print} or @code{x} depending on how elaborate your
-format specification is---it uses @code{x} if you specify a unit size,
-or one of the two formats (@samp{i} and @samp{s}) that are only
-supported by @code{x}; otherwise it uses @code{print}.
-
-@table @code
-@item display @var{exp}
-@kindex display
-Add the expression @var{exp} to the list of expressions to display
-each time the program stops.  @xref{Expressions}.
-
-@code{display} will not repeat if you press @key{RET} again after using it.
-
-@item display/@var{fmt} @var{exp}
-For @var{fmt} specifying only a display format and not a size or
-count, add the expression @var{exp} to the auto-display list but
-arranges to display it each time in the specified format @var{fmt}.
-@xref{Output formats}.
-
-@item display/@var{fmt} @var{addr}
-For @var{fmt} @samp{i} or @samp{s}, or including a unit-size or a
-number of units, add the expression @var{addr} as a memory address to
-be examined each time the program stops.  Examining means in effect
-doing @samp{x/@var{fmt} @var{addr}}.  @xref{Memory}.
-@end table
-
-For example, @samp{display/i $pc} can be helpful, to see the machine
-instruction about to be executed each time execution stops (@samp{$pc}
-is a common name for the program counter; @pxref{Registers}).
-
-@table @code
-@item undisplay @var{dnums}@dots{}
-@itemx delete display @var{dnums}@dots{}
-@kindex delete display
-@kindex undisplay
-Remove item numbers @var{dnums} from the list of expressions to display.
-
-@code{undisplay} will not repeat if you press @key{RET} after using it.
-(Otherwise you would just get the error @samp{No display number @dots{}}.)
-
-@item disable display @var{dnums}@dots{}
-@kindex disable display
-Disable the display of item numbers @var{dnums}.  A disabled display
-item is not printed automatically, but is not forgotten.  It may be
-enabled again later.
-
-@item enable display @var{dnums}@dots{}
-@kindex enable display
-Enable display of item numbers @var{dnums}.  It becomes effective once
-again in auto display of its expression, until you specify otherwise.
-
-@item display
-Display the current values of the expressions on the list, just as is
-done when the program stops.
-
-@item info display
-@kindex info display
-Print the list of expressions previously set up to display
-automatically, each one with its item number, but without showing the
-values.  This includes disabled expressions, which are marked as such.
-It also includes expressions which would not be displayed right now
-because they refer to automatic variables not currently available.
-@end table
-
-If a display expression refers to local variables, then it does not make
-sense outside the lexical context for which it was set up.  Such an
-expression is disabled when execution enters a context where one of its
-variables is not defined.  For example, if you give the command
-@code{display last_char} while inside a function with an argument
-@code{last_char}, then this argument will be displayed while the program
-continues to stop inside that function.  When it stops elsewhere---where
-there is no variable @code{last_char}---display is disabled.  The next time
-your program stops where @code{last_char} is meaningful, you can enable the
-display expression once again.
-
-@node Print Settings, Value History, Auto Display, Data
-@section Print Settings
-
-@cindex format options
-@cindex print settings
-_GDBN__ provides the following ways to control how arrays, structures,
-and symbols are printed.  
-
-@noindent
-These settings are useful for debugging programs in any language:
-
-@table @code
-@item set print address
-@item set print address on
-@kindex set print address
-_GDBN__ will print memory addresses showing the location of stack
-traces, structure values, pointer values, breakpoints, and so forth,
-even when it also displays the contents of those addresses.  The default
-is on.  For example, this is what a stack frame display looks like, with
-@code{set print address on}:
-@smallexample
-(_GDBP__) f
-#0  set_quotes (lq=0x34c78 "<<", rq=0x34c88 ">>") 
-    at input.c:530
-530         if (lquote != def_lquote)
-@end smallexample
-
-@item set print address off
-Do not print addresses when displaying their contents.  For example,
-this is the same stack frame displayed with @code{set print address off}:
-@example
-(_GDBP__) set print addr off
-(_GDBP__) f
-#0  set_quotes (lq="<<", rq=">>") at input.c:530
-530         if (lquote != def_lquote)
-@end example
-
-@item show print address
-@kindex show print address
-Show whether or not addresses are to be printed.
-
-@item set print array
-@itemx set print array on
-@kindex set print array
-_GDBN__ will pretty print arrays.  This format is more convenient to read,
-but uses more space.  The default is off.
-
-@item set print array off.
-Return to compressed format for arrays.
-
-@item show print array
-@kindex show print array
-Show whether compressed or pretty format is selected for displaying
-arrays. 
-
-@item set print elements @var{number-of-elements}
-@kindex set print elements
-If _GDBN__ is printing a large array, it will stop printing after it has
-printed the number of elements set by the @code{set print elements} command.
-This limit also applies to the display of strings.
-
-@item show print elements
-@kindex show print elements
-Display the number of elements of a large array that _GDBN__ will print
-before losing patience.
-
-@item set print pretty on
-@kindex set print pretty
-Cause _GDBN__ to print structures in an indented format with one member per
-line, like this:
-
-@example
-$1 = @{
-  next = 0x0,
-  flags = @{
-    sweet = 1,
-    sour = 1
-  @},
-  meat = 0x54 "Pork"
-@}
-@end example
-
-@item set print pretty off
-Cause _GDBN__ to print structures in a compact format, like this:
-
-@smallexample
-$1 = @{next = 0x0, flags = @{sweet = 1, sour = 1@}, meat \
-= 0x54 "Pork"@}
-@end smallexample
-
-@noindent
-This is the default format.
-
-@item show print pretty
-@kindex show print pretty
-Show which format _GDBN__ will use to print structures.
-
-@item set print sevenbit-strings on
-@kindex set print sevenbit-strings
-Print using only seven-bit characters; if this option is set, 
-_GDBN__ will display any eight-bit characters (in strings or character
-values) using the notation @code{\}@var{nnn}.  For example, @kbd{M-a} is
-displayed as @code{\341}.
-
-@item set print sevenbit-strings off
-Print using either seven-bit or eight-bit characters, as required.  This
-is the default.
-
-@item show print sevenbit-strings
-@kindex show print sevenbit-strings
-Show whether or not _GDBN__ will print only seven-bit characters.
-
-@item set print union on
-@kindex set print union
-Tell _GDBN__ to print unions which are contained in structures.  This is the
-default setting.
-
-@item set print union off
-Tell _GDBN__ not to print unions which are contained in structures.
-
-@item show print union
-@kindex show print union
-Ask _GDBN__ whether or not it will print unions which are contained in
-structures. 
-
-For example, given the declarations
-
-@smallexample
-typedef enum @{Tree, Bug@} Species;
-typedef enum @{Big_tree, Acorn, Seedling@} Tree_forms;
-typedef enum @{Caterpillar, Cocoon, Butterfly@} Bug_forms;
-
-struct thing @{
-  Species it;
-  union @{
-    Tree_forms tree;
-    Bug_forms bug;
-  @} form;
-@};
-
-struct thing foo = @{Tree, @{Acorn@}@};
-@end smallexample
-
-@noindent
-with @code{set print union on} in effect @samp{p foo} would print
-
-@smallexample
-$1 = @{it = Tree, form = @{tree = Acorn, bug = Cocoon@}@}
-@end smallexample
-
-@noindent
-and with @code{set print union off} in effect it would print
-
-@smallexample
-$1 = @{it = Tree, form = @{...@}@}
-@end smallexample
-@end table
-
-@noindent
-These settings are of interest when debugging C++ programs:
-
-@table @code
-@item set print demangle 
-@itemx set print demangle on 
-@kindex set print demangle
-Print C++ names in their source form rather than in the mangled form
-in which they are passed to the assembler and linker for type-safe linkage.
-The default is on.
-
-@item show print demangle
-@kindex show print demangle
-Show whether C++ names will be printed in mangled or demangled form.
-
-@item set print asm-demangle 
-@itemx set print asm-demangle on 
-@kindex set print asm-demangle
-Print C++ names in their source form rather than their mangled form, even
-in assembler code printouts such as instruction disassemblies.
-The default is off.
-
-@item show print asm-demangle
-@kindex show print asm-demangle
-Show whether C++ names in assembly listings will be printed in mangled
-or demangled form.
-
-@item set print object
-@itemx set print object on
-@kindex set print object
-When displaying a pointer to an object, identify the @emph{actual}
-(derived) type of the object rather than the @emph{declared} type, using
-the virtual function table.
-
-@item set print object off
-Display only the declared type of objects, without reference to the
-virtual function table.  This is the default setting.
-
-@item show print object
-@kindex show print object
-Show whether actual, or declared, object types will be displayed.
-
-@item set print vtbl 
-@itemx set print vtbl on 
-@kindex set print vtbl
-Pretty print C++ virtual function tables.  The default is off.
-
-@item set print vtbl off
-Do not pretty print C++ virtual function tables.
-
-@item show print vtbl
-@kindex show print vtbl
-Show whether C++ virtual function tables are pretty printed, or not.
-
-@end table
-
-@node Value History, Convenience Vars, Print Settings, Data
-@section Value History
-
-@cindex value history
-Values printed by the @code{print} command are saved in _GDBN__'s @dfn{value
-history} so that you can refer to them in other expressions.  Values are
-kept until the symbol table is re-read or discarded (for example with
-the @code{file} or @code{symbol-file} commands).  When the symbol table
-changes, the value history is discarded, since the values may contain
-pointers back to the types defined in the symbol table.
-
-@cindex @code{$}
-@cindex @code{$$}
-@cindex history number
-The values printed are given @dfn{history numbers} for you to refer to them
-by.  These are successive integers starting with one.  @code{print} shows you
-the history number assigned to a value by printing @samp{$@var{num} = }
-before the value; here @var{num} is the history number.
-
-To refer to any previous value, use @samp{$} followed by the value's
-history number.  The way @code{print} labels its output is designed to
-remind you of this.  Just @code{$} refers to the most recent value in
-the history, and @code{$$} refers to the value before that.
-@code{$$@var{n}} refers to the @var{n}th value from the end; @code{$$2}
-is the value just prior to @code{$$}, @code{$$1} is equivalent to
-@code{$$}, and @code{$$0} is equivalent to @code{$}.
-
-For example, suppose you have just printed a pointer to a structure and
-want to see the contents of the structure.  It suffices to type
-
-@example
-p *$
-@end example
-
-If you have a chain of structures where the component @code{next} points
-to the next one, you can print the contents of the next one with this:
-
-@example
-p *$.next
-@end example
-
-@noindent
-You can print successive links in the chain by repeating this
-command---which you can do by just typing @key{RET}.
-
-Note that the history records values, not expressions.  If the value of
-@code{x} is 4 and you type these commands:
-
-@example
-print x
-set x=5
-@end example
-
-@noindent
-then the value recorded in the value history by the @code{print} command
-remains 4 even though the value of @code{x} has changed.
-
-@table @code
-@kindex show values
-@item show values
-Print the last ten values in the value history, with their item numbers.
-This is like @samp{p@ $$9} repeated ten times, except that @code{show
-values} does not change the history.
-
-@item show values @var{n}
-Print ten history values centered on history item number @var{n}.
-
-@item show values +
-Print ten history values just after the values last printed.  If no more
-values are available, produces no display.
-@end table
-
-Pressing @key{RET} to repeat @code{show values @var{n}} has exactly the
-same effect as @samp{show values +}.  
-
-@node Convenience Vars, Registers, Value History, Data
-@section Convenience Variables
-
-@cindex convenience variables
-_GDBN__ provides @dfn{convenience variables} that you can use within
-_GDBN__ to hold on to a value and refer to it later.  These variables
-exist entirely within _GDBN__; they are not part of your program, and
-setting a convenience variable has no direct effect on further execution
-of your program.  That's why you can use them freely.
-
-Convenience variables are prefixed with @samp{$}.  Any name preceded by
-@samp{$} can be used for a convenience variable, unless it is one of
-the predefined machine-specific register names (@pxref{Registers}).
-(Value history references, in contrast, are @emph{numbers} preceded
-by @samp{$}.  @xref{Value History}.)
-
-You can save a value in a convenience variable with an assignment
-expression, just as you would set a variable in your program.  Example:
-
-@example
-set $foo = *object_ptr
-@end example
-
-@noindent
-would save in @code{$foo} the value contained in the object pointed to by
-@code{object_ptr}.
-
-Using a convenience variable for the first time creates it; but its value
-is @code{void} until you assign a new value.  You can alter the value with
-another assignment at any time.
-
-Convenience variables have no fixed types.  You can assign a convenience
-variable any type of value, including structures and arrays, even if
-that variable already has a value of a different type.  The convenience
-variable, when used as an expression, has the type of its current value.
-
-@table @code
-@item show convenience
-@kindex show convenience
-Print a list of convenience variables used so far, and their values.
-Abbreviated @code{show con}.
-@end table
-
-One of the ways to use a convenience variable is as a counter to be
-incremented or a pointer to be advanced.  For example, to print
-a field from successive elements of an array of structures:
-
-_0__@example
-set $i = 0
-print bar[$i++]->contents
-@i{@dots{} repeat that command by typing @key{RET}.}
-_1__@end example
-
-Some convenience variables are created automatically by _GDBN__ and given
-values likely to be useful.
-
-@table @code
-@item $_
-@kindex $_
-The variable @code{$_} is automatically set by the @code{x} command to
-the last address examined (@pxref{Memory}).  Other commands which
-provide a default address for @code{x} to examine also set @code{$_}
-to that address; these commands include @code{info line} and @code{info
-breakpoint}.  The type of @code{$_} is @code{void *} except when set by the
-@code{x} command, in which case it is a pointer to the type of @code{$__}.
-
-@item $__
-@kindex $__
-The variable @code{$__} is automatically set by the @code{x} command
-to the value found in the last address examined.  Its type is chosen
-to match the format in which the data was printed.
-@end table
-
-@node Registers, Floating Point Hardware, Convenience Vars, Data
-@section Registers
-
-@cindex registers
-You can refer to machine register contents, in expressions, as variables
-with names starting with @samp{$}.  The names of registers are different
-for each machine; use @code{info registers} to see the names used on
-your machine.  
-
-@table @code
-@item info registers
-@kindex info registers
-Print the names and values of all registers except floating-point
-registers (in the selected stack frame).
-
-@item info all-registers
-@kindex info all-registers
-@cindex floating point registers
-Print the names and values of all registers, including floating-point
-registers.
-
-@item info registers @var{regname}
-Print the relativized value of register @var{regname}.  @var{regname}
-may be any register name valid on the machine you are using, with
-or without the initial @samp{$}.
-@end table
-
-The register names @code{$pc} and @code{$sp} are used on most machines
-for the program counter register and the stack pointer.  For example,
-you could print the program counter in hex with
-@example
-p/x $pc
-@end example
-
-@noindent
-or print the instruction to be executed next with
-@example
-x/i $pc
-@end example
-
-@noindent
-or add four to the stack pointer with
-@example
-set $sp += 4
-@end example
-
-@noindent
-The last is a way of removing one word from the stack, on machines where
-stacks grow downward in memory (most machines, nowadays).  This assumes
-that the innermost stack frame is selected; setting @code{$sp} is
-not allowed when other stack frames are selected.  (To pop entire frames
-off the stack, regardless of machine architecture, use @code{return};
-@pxref{Returning}.)
-
-Often @code{$fp} is used for a register that contains a pointer to the
-current stack frame, and @code{$ps} is sometimes used for a register
-that contains the processor status.  These standard register names may
-be available on your machine even though the @code{info registers}
-command shows other names.  For example, on the SPARC, @code{info
-registers} displays the processor status register as @code{$psr} but you
-can also refer to it as @code{$ps}.
-
-_GDBN__ always considers the contents of an ordinary register as an
-integer when the register is examined in this way.  Some machines have
-special registers which can hold nothing but floating point; these
-registers are considered to have floating point values.  There is no way
-to refer to the contents of an ordinary register as floating point value
-(although you can @emph{print} it as a floating point value with
-@samp{print/f $@var{regname}}).
-
-Some registers have distinct ``raw'' and ``virtual'' data formats.  This
-means that the data format in which the register contents are saved by
-the operating system is not the same one that your program normally
-sees.  For example, the registers of the 68881 floating point
-coprocessor are always saved in ``extended'' (raw) format, but all C
-programs expect to work with ``double'' (virtual) format.  In such
-cases, _GDBN__ normally works with the virtual format only (the format that
-makes sense for your program), but the @code{info registers} command
-prints the data in both formats.
-
-Normally, register values are relative to the selected stack frame
-(@pxref{Selection}).  This means that you get the value that the
-register would contain if all stack frames farther in were exited and
-their saved registers restored.  In order to see the true contents of
-hardware registers, you must select the innermost frame (with
-@samp{frame 0}).
-
-However, _GDBN__ must deduce where registers are saved, from the machine
-code generated by your compiler.  If some registers are not saved, or if
-_GDBN__ is unable to locate the saved registers, the selected stack
-frame will make no difference.
-
-@node Floating Point Hardware,  , Registers, Data
-@section Floating Point Hardware
-@cindex floating point
-Depending on the host machine architecture, _GDBN__ may be able to give
-you more information about the status of the floating point hardware.
-
-@table @code
-@item info float
-@kindex info float
-If available, provides hardware-dependent information about the floating
-point unit.  The exact contents and layout vary depending on the
-floating point chip.
-@end table
-@c FIXME: this is a cop-out.  Try to get examples, explanations.  Only
-@c FIXME...supported currently on arm's and 386's.  Mark properly with 
-@c FIXME... m4 macros to isolate general statements from hardware-dep, 
-@c FIXME... at that point.
-
-@node Languages, Symbols, Data, Top
-@chapter Using _GDBN__ with Different Languages
-@cindex languages
-
-Although programming languages generally have common aspects, they are
-rarely expressed in the same manner.  For instance, in ANSI C,
-dereferencing a pointer @code{p} is accomplished by @code{*p}, but in
-Modula-2, it is accomplished by @code{p^}.  Values can also be
-represented (and displayed) differently.  Hex numbers in C are written
-like @samp{0x1ae}, while in Modula-2 they appear as @samp{1AEH}.
-
-@cindex working language
-Language-specific information is built into _GDBN__ for some languages,
-allowing you to express operations like the above in the program's
-native language, and allowing _GDBN__ to output values in a manner
-consistent with the syntax of the program's native language.  The
-language you use to build expressions, called the @dfn{working
-language}, can be selected manually, or _GDBN__ can set it
-automatically.
-
-@menu
-* Setting::                     Switching between source languages
-* Show::                        Displaying the language
-* Checks::                      Type and Range checks
-* Support::                     Supported languages
-@end menu
-
-@node Setting, Show, Languages, Languages
-@section Switching between source languages
-
-There are two ways to control the working language---either have _GDBN__
-set it automatically, or select it manually yourself.  You can use the
-@code{set language} command for either purpose.  On startup, _GDBN__
-defaults to setting the language automatically.
-
-@menu
-* Manually::                    Setting the working language manually
-* Automatically::               Having _GDBN__ infer the source language
-@end menu
-
-@node Manually, Automatically, Setting, Setting
-@subsection Setting the working language
-
-@kindex set language
-To set the language, issue the command @samp{set language @var{lang}},
-where @var{lang} is the name of a language: @code{c} or @code{modula-2}.
-For a list of the supported languages, type @samp{set language}.
-
-Setting the language manually prevents _GDBN__ from updating the working
-language automatically.  This can lead to confusion if you try
-to debug a program when the working language is not the same as the
-source language, when an expression is acceptable to both
-languages---but means different things.  For instance, if the current
-source file were written in C, and _GDBN__ was parsing Modula-2, a
-command such as:
-
-@example
-print a = b + c
-@end example
-
-@noindent
-might not have the effect you intended.  In C, this means to add
-@code{b} and @code{c} and place the result in @code{a}.  The result
-printed would be the value of @code{a}.  In Modula-2, this means to compare
-@code{a} to the result of @code{b+c}, yielding a @code{BOOLEAN} value.
-
-If you allow _GDBN__ to set the language automatically, then
-you can count on expressions evaluating the same way in your debugging
-session and in your program.
-
-@node Automatically,  , Manually, Setting
-@subsection Having _GDBN__ infer the source language
-
-To have _GDBN__ set the working language automatically, use @samp{set
-language local} or @samp{set language auto}.  _GDBN__ then infers the
-language that a program was written in by looking at the name of its
-source files, and examining their extensions:
-
-@table @file
-@item *.mod
-Modula-2 source file
-
-@item *.c
-@itemx *.cc
-C or C++ source file.
-@end table
-
-This information is recorded for each function or procedure in a source
-file.  When your program stops in a frame (usually by encountering a
-breakpoint), _GDBN__ sets the working language to the language recorded
-for the function in that frame.  If the language for a frame is unknown
-(that is, if the function or block corresponding to the frame was
-defined in a source file that does not have a recognized extension), the
-current working language is not changed, and _GDBN__ issues a warning.
-
-This may not seem necessary for most programs, which are written
-entirely in one source language.  However, program modules and libraries
-written in one source language can be used by a main program written in
-a different source language.  Using @samp{set language auto} in this
-case frees you from having to set the working language manually.
-
-@node Show, Checks, Setting, Languages
-@section Displaying the language
-
-The following commands will help you find out which language is the
-working language, and also what language source files were written in.
-
-@kindex show language
-@kindex info frame
-@kindex info source
-@table @code
-@item show language
-Display the current working language.  This is the
-language you can use with commands such as @code{print} to
-build and compute expressions that may involve variables in the program.
-
-@item info frame
-Among the other information listed here (@pxref{Frame Info,,Information
-about a Frame}) is the source language for this frame.  This is the
-language that will become the working language if you ever use an
-identifier that is in this frame.
-
-@item info source
-Among the other information listed here (@pxref{Symbols,,Examining the
-Symbol Table}) is the source language of this source file.
-
-@end table
-
-@node Checks, Support, Show, Languages
-@section Type and range Checking
-
-@quotation
-@emph{Warning:} In this release, the _GDBN__ commands for type and range
-checking are included, but they do not yet have any effect.  This
-section documents the intended facilities.
-@end quotation
-@c FIXME remove warning when type/range code added
-
-Some languages are designed to guard you against making seemingly common
-errors through a series of compile- and run-time checks.  These include
-checking the type of arguments to functions and operators, and making
-sure mathematical overflows are caught at run time.  Checks such as
-these help to ensure a program's correctness once it has been compiled
-by eliminating type mismatches, and providing active checks for range
-errors when the program is running.
-
-_GDBN__ can check for conditions like the above if you wish.
-Although _GDBN__ will not check the statements in your program, it
-can check expressions entered directly into _GDBN__ for evaluation via
-the @code{print} command, for example.  As with the working language,
-_GDBN__ can also decide whether or not to check automatically based on
-the source language of the program being debugged.
-@xref{Support,,Supported Languages}, for the default settings
-of supported languages.
-
-@menu
-* Type Checking::               An overview of type checking
-* Range Checking::              An overview of range checking
-@end menu
-
-@cindex type checking
-@cindex checks, type
-@node Type Checking, Range Checking, Checks, Checks
-@subsection An overview of type checking
-
-Some languages, such as Modula-2, are strongly typed, meaning that the
-arguments to operators and functions have to be of the correct type,
-otherwise an error occurs.  These checks prevent type mismatch
-errors from ever causing any run-time problems.  For example,
-
-@example
-1 + 2 @result{} 3
-@error{} 1 + 2.3
-@end example
-
-The second example fails because the @code{CARDINAL} 1 is not
-type-compatible with the @code{REAL} 2.3.
-
-For expressions you use in _GDBN__ commands, you can tell the _GDBN__
-type checker to skip checking; to treat any mismatches as errors and
-abandon the expression; or only issue warnings when type mismatches
-occur, but evaluate the expression anyway.  When you choose the last of
-these, _GDBN__ evaluates expressions like the second example above, but
-also issues a warning.
-
-Even though you may turn type checking off, other type-based reasons may
-prevent _GDBN__ from evaluating an expression.  For instance, _GDBN__ does not
-know how to add an @code{int} and a @code{struct foo}.  These particular
-type errors have nothing to do with the language in use, and usually
-arise from expressions, such as the one described above, which make
-little sense to evaluate anyway.
-
-Each language defines to what degree it is strict about type.  For
-instance, both Modula-2 and C require the arguments to arithmetical
-operators to be numbers.  In C, enumerated types and pointers can be
-represented as numbers, so that they are valid arguments to mathematical
-operators.  @xref{Support,,Supported Languages}, for futher
-details on specific languages.
-
-_GDBN__ provides some additional commands for controlling the type checker:
-
-@kindex set check
-@kindex set check type
-@kindex show check type
-@table @code
-@item set check type auto
-Set type checking on or off based on the current working language.  
-@xref{Support,,Supported Languages}, for the default settings for 
-each language.
-
-@item set check type on
-@itemx set check type off
-Set type checking on or off, overriding the default setting for the
-current working language.  Issue a warning if the setting does not
-match the language's default.  If any type mismatches occur in
-evaluating an expression while typechecking is on, _GDBN__ prints a
-message and aborts evaluation of the expression.
-
-@item set check type warn
-Cause the type checker to issue warnings, but to always attempt to
-evaluate the expression.  Evaluating the expression may still
-be impossible for other reasons.  For example, _GDBN__ cannot add
-numbers and structures.
-
-@item show type
-Show the current setting of the type checker, and whether or not _GDBN__ is 
-setting it automatically.
-@end table
-
-@cindex range checking
-@cindex checks, range
-@node Range Checking,  , Type Checking, Checks
-@subsection An overview of Range Checking
-
-In some languages (such as Modula-2), it is an error to exceed the
-bounds of a type; this is enforced with run-time checks.  Such range
-checking is meant to ensure program correctness by making sure
-computations do not overflow, or indices on an array element access do
-not exceed the bounds of the array.
-
-For expressions you use in _GDBN__ commands, you can tell _GDBN__ to
-ignore range errors; to always treat them as errors and abandon the
-expression; or to issue warnings when a range error occurs but evaluate
-the expression anyway.
-
-A range error can result from numerical overflow, from exceeding an
-array index bound, or when you type in a constant that is not a member
-of any type.  Some languages, however, do not treat overflows as an
-error.  In many implementations of C, mathematical overflow causes the
-result to ``wrap around'' to lower values---for example, if @var{m} is
-the largest integer value, and @var{s} is the smallest, then
-@example
-@var{m} + 1 @result{} @var{s}
-@end example
-
-This, too, is specific to individual languages, and in some cases
-specific to individual compilers or machines.  @xref{Support,,
-Supported Languages}, for further details on specific languages.
-
-_GDBN__ provides some additional commands for controlling the range checker:
-
-@kindex set check
-@kindex set check range
-@kindex show check range
-@table @code
-@item set check range auto
-Set range checking on or off based on the current working language.  
-@xref{Support,,Supported Languages}, for the default settings for 
-each language.
-
-@item set check range on
-@itemx set check range off
-Set range checking on or off, overriding the default setting for the
-current working language.  A warning is issued if the setting does not
-match the language's default.  If a range error occurs, then a message
-is printed and evaluation of the expression is aborted.
-
-@item set check range warn
-Output messages when the _GDBN__ range checker detects a range error,
-but attempt to evaluate the expression anyway.  Evaluating the
-expression may still be impossible for other reasons, such as accessing
-memory that the process does not own (a typical example from many UNIX
-systems).
-
-@item show range
-Show the current setting of the range checker, and whether or not it is 
-being set automatically by _GDBN__.
-@end table
-
-@node Support,  , Checks, Languages
-@section Supported Languages
-
-_GDBN__ _GDB_VN__ supports C, C++, and Modula-2.  The syntax for C and C++ is
-so closely related that _GDBN__ does not distinguish the two.  Some
-_GDBN__ features may be used in expressions regardless of the language
-you use: the _GDBN__ @code{@@} and @code{::} operators, and the
-@samp{@{type@}addr} construct (@pxref{Expressions}) can be used with the constructs of
-any of the supported languages.
-
-The following sections detail to what degree each of these
-source languages is supported by _GDBN__.  These sections are
-not meant to be language tutorials or references, but serve only as a
-reference guide to what the _GDBN__ expression parser will accept, and
-what input and output formats should look like for different languages.
-There are many good books written on each of these languages; please
-look to these for a language reference or tutorial.
-
-@menu
-* C::                           C and C++
-* Modula-2::                    Modula-2
-@end menu
-
-@node C, Modula-2, Support, Support
-@subsection C and C++
-@cindex C and C++
-
-@cindex expressions in C or C++
-Since C and C++ are so closely related, _GDBN__ does not distinguish
-between them when interpreting the expressions recognized in _GDBN__
-commands.  
-
-@cindex C++
-@kindex g++
-@cindex GNU C++
-The C++ debugging facilities are jointly implemented by the GNU C++
-compiler and _GDBN__.  Therefore, to debug your C++ code effectively,
-you must compile your C++ programs with the GNU C++ compiler,
-@code{g++}.
-
-
-@menu
-* C Operators::                 C and C++ Operators
-* C Constants::                 C and C++ Constants
-* Cplusplus expressions::       C++ Expressions
-* C Defaults::                  Default settings for C and C++
-* C Checks::                    C and C++ Type and Range Checks
-* Debugging C::                 _GDBN__ and C
-* Debugging C plus plus::       Special features for C++
-@end menu
-
-@cindex C and C++ operators
-@node C Operators, C Constants, C, C
-@subsubsection C and C++ Operators
-
-Operators must be defined on values of specific types.  For instance,
-@code{+} is defined on numbers, but not on structures.  Operators are
-often defined on groups of types.  For the purposes of C and C++, the
-following definitions hold:
-
-@itemize @bullet
-@item 
-@emph{Integral types} include @code{int} with any of its storage-class
-specifiers, @code{char}, and @code{enum}s.
-
-@item
-@emph{Floating-point types} include @code{float} and @code{double}.
-
-@item
-@emph{Pointer types} include all types defined as @code{(@var{type}
-*)}.
-
-@item 
-@emph{Scalar types} include all of the above.
-
-@end itemize
-
-@noindent
-The following operators are supported.  They are listed here
-in order of increasing precedence:
-
-@table @code
-_0__
-@item ,
-The comma or sequencing operator.  Expressions in a comma-separated list
-are evaluated from left to right, with the result of the entire
-expression being the last expression evaluated.
-
-@item =
-Assignment.  The value of an assignment expression is the value
-assigned.  Defined on scalar types.
-
-@item @var{op}=
-Used in an expression of the form @var{a} @var{op}@code{=} @var{b}, and
-translated to @var{a} @code{=} @var{a op b}.  @var{op}@code{=} and
-@code{=} have the same precendence.  @var{op} is any one of the
-operators @code{|}, @code{^}, @code{&}, @code{<<}, @code{>>}, @code{+},
-@code{-}, @code{*}, @code{/}, @code{%}.
-
-@item ?:
-The ternary operator.  @code{@var{a} ? @var{b} : @var{c}} can be thought
-of as:  if @var{a} then @var{b} else @var{c}.  @var{a} should be of an
-integral type.
-
-@item ||
-Logical OR.  Defined on integral types.
-
-@item &&
-Logical AND.  Defined on integral types.
-
-@item |
-Bitwise OR.  Defined on integral types.
-
-@item ^
-Bitwise exclusive-OR.  Defined on integral types.
-
-@item &
-Bitwise AND.  Defined on integral types.
-
-@item ==@r{, }!=
-Equality and inequality.  Defined on scalar types.  The value of these
-expressions is 0 for false and non-zero for true.
-
-@item <@r{, }>@r{, }<=@r{, }>=
-Less than, greater than, less than or equal, greater than or equal.
-Defined on scalar types.  The value of these expressions is 0 for false
-and non-zero for true.
-
-@item <<@r{, }>>
-left shift, and right shift.  Defined on integral types.
-
-@item @@ 
-The _GDBN__ ``artificial array'' operator (@pxref{Expressions}).
-
-@item +@r{, }-
-Addition and subtraction.  Defined on integral types, floating-point types and
-pointer types.  
-
-@item *@r{, }/@r{, }%
-Multiplication, division, and modulus.  Multiplication and division are
-defined on integral and floating-point types.  Modulus is defined on
-integral types.
-
-@item ++@r{, }--
-Increment and decrement.  When appearing before a variable, the
-operation is performed before the variable is used in an expression;
-when appearing after it, the variable's value is used before the
-operation takes place.
-
-@item *
-Pointer dereferencing.  Defined on pointer types.  Same precedence as
-@code{++}.
-
-@item &
-Address operator.  Defined on variables.  Same precedence as @code{++}.
-
-@item -
-Negative.  Defined on integral and floating-point types.  Same
-precedence as @code{++}.
-
-@item !
-Logical negation.  Defined on integral types.  Same precedence as
-@code{++}.
-
-@item ~
-Bitwise complement operator.  Defined on integral types.  Same precedence as
-@code{++}.
-
-@item .@r{, }->
-Structure member, and pointer-to-structure member.  For convenience,
-_GDBN__ regards the two as equivalent, choosing whether to dereference a
-pointer based on the stored type information.  
-Defined on @code{struct}s and @code{union}s.
-
-@item []
-Array indexing.  @code{@var{a}[@var{i}]} is defined as
-@code{*(@var{a}+@var{i})}.  Same precedence as @code{->}.
-
-@item ()
-Function parameter list.  Same precedence as @code{->}.
-
-@item ::
-C++ scope resolution operator.  Defined on
-@code{struct}, @code{union}, and @code{class} types.
-
-@item ::
-The _GDBN__ scope operator (@pxref{Expressions}).  Same precedence as
-@code{::}, above.  _1__
-@end table
-
-@cindex C and C++ constants
-@node C Constants, Cplusplus expressions, C Operators, C
-@subsubsection C and C++ Constants
-
-_GDBN__ allows you to express the constants of C and C++ in the
-following ways:
-
-@itemize @bullet
-
-@item
-Integer constants are a sequence of digits.  Octal constants are
-specified by a leading @samp{0} (ie. zero), and hexadecimal constants by
-a leading @samp{0x} or @samp{0X}.  Constants may also end with an
-@samp{l}, specifying that the constant should be treated as a
-@code{long} value.
-
-@item
-Floating point constants are a sequence of digits, followed by a decimal
-point, followed by a sequence of digits, and optionally followed by an
-exponent.  An exponent is of the form:
-@samp{@w{e@r{[[}+@r{]|}-@r{]}@var{nnn}}}, where @var{nnn} is another
-sequence of digits.  The @samp{+} is optional for positive exponents.
-
-@item
-Enumerated constants consist of enumerated identifiers, or their
-integral equivalents.
-
-@item
-Character constants are a single character surrounded by single quotes
-(@code{'}), or a number---the ordinal value of the corresponding character
-(usually its @sc{ASCII} value).  Within quotes, the single character may
-be represented by a letter or by @dfn{escape sequences}, which are of
-the form @samp{\@var{nnn}}, where @var{nnn} is the octal representation
-of the character's ordinal value; or of the form @samp{\@var{x}}, where
-@samp{@var{x}} is a predefined special character---for example,
-@samp{\n} for newline.
-
-@item
-String constants are a sequence of character constants surrounded
-by double quotes (@code{"}).
-
-@item
-Pointer constants are an integral value.
-
-@end itemize
-
-
-@node Cplusplus expressions, C Defaults, C Constants, C
-@subsubsection C++ Expressions
-
-@cindex expressions in C++
-_GDBN__'s expression handling has the following extensions to
-interpret a significant subset of C++ expressions:
-
-@enumerate
-
-@cindex member functions
-@item 
-Member function calls are allowed; you can use expressions like
-@example
-count = aml->GetOriginal(x, y)
-@end example
-
-@kindex this
-@cindex namespace in C++
-@item 
-While a member function is active (in the selected stack frame), your
-expressions have the same namespace available as the member function;
-that is, _GDBN__ allows implicit references to the class instance
-pointer @code{this} following the same rules as C++.
-
-@cindex call overloaded functions
-@cindex type conversions in C++
-@item 
-You can call overloaded functions; _GDBN__ will resolve the function
-call to the right definition, with one restriction---you must use
-arguments of the type required by the function that you want to call.
-_GDBN__ will not perform conversions requiring constructors or
-user-defined type operators.
-
-@cindex reference declarations
-@item
-_GDBN__ understands variables declared as C++ references; you can use them in
-expressions just as you do in C++ source---they are automatically
-dereferenced.  
-
-In the parameter list shown when _GDBN__ displays a frame, the values of
-reference variables are not displayed (unlike other variables); this
-avoids clutter, since references are often used for large structures.
-The @emph{address} of a reference variable is always shown, unless
-you've specified @samp{set print address off}.
-
-
-@item
-_GDBN__ supports the C++ name resolution operator @code{::}---your
-expressions can use it just as expressions in your program do.  Since
-one scope may be defined in another, you can use @code{::} repeatedly if
-necessary, for example in an expression like
-@samp{@var{scope1}::@var{scope2}::@var{name}}.  _GDBN__ also allows
-resolving name scope by reference to source files, in both C and C++
-debugging; @pxref{Variables}.
-
-@end enumerate
-
-
-@node C Defaults, C Checks, Cplusplus expressions, C
-@subsubsection C and C++ Defaults
-@cindex C and C++ defaults
-
-If you allow _GDBN__ to set type and range checking automatically, they 
-both default to @code{off} whenever the working language changes to 
-C/C++.  This happens regardless of whether you, or _GDBN__,
-selected the working language.
-
-If you allow _GDBN__ to set the language automatically, it sets the
-working language to C/C++ on entering code compiled from a source file
-whose name ends with @file{.c} or @file{.cc}.
-@xref{Automatically,,Having _GDBN__ infer the source language}, for
-further details.
-
-@node C Checks, Debugging C, C Defaults, C
-@subsubsection C and C++ Type and Range Checks
-@cindex C and C++ checks
-
-@quotation
-@emph{Warning:} in this release, _GDBN__ does not yet perform type or
-range checking.
-@end quotation
-@c FIXME remove warning when type/range checks added
-
-By default, when _GDBN__ parses C or C++ expressions, type checking
-is not used.  However, if you turn type checking on, _GDBN__ will
-consider two variables type equivalent if:
-
-@itemize @bullet
-@item
-The two variables are structured and have the same structure, union, or
-enumerated tag.
-
-@item 
-Two two variables have the same type name, or types that have been
-declared equivalent through @code{typedef}.
-
-@ignore
-@c leaving this out because neither J Gilmore nor R Pesch understand it.
-@c FIXME--beers?
-@item
-The two @code{struct}, @code{union}, or @code{enum} variables are
-declared in the same declaration.  (Note: this may not be true for all C
-compilers.)
-@end ignore
-
-@end itemize
-
-Range checking, if turned on, is done on mathematical operations.  Array
-indices are not checked, since they are often used to index a pointer
-that is not itself an array.
-
-@node Debugging C, Debugging C plus plus, C Checks, C
-@subsubsection _GDBN__ and C
-
-The @code{set print union} and @code{show print union} commands apply to
-the @code{union} type.  When set to @samp{on}, any @code{union} that is
-inside a @code{struct} or @code{class} will also be printed.
-Otherwise, it will appear as @samp{@{...@}}.
-
-The @code{@@} operator aids in the debugging of dynamic arrays, formed
-with pointers and a memory allocation function.  (@pxref{Expressions})
-
-@node Debugging C plus plus,  , Debugging C, C
-@subsubsection _GDBN__ Commands for C++
-
-@cindex commands for C++
-Some _GDBN__ commands are particularly useful with C++, and some are
-designed specifically for use with C++.  Here is a summary:
-
-@table @code
-@cindex break in overloaded functions
-@item @r{breakpoint menus}
-When you want a breakpoint in a function whose name is overloaded,
-_GDBN__'s breakpoint menus help you specify which function definition
-you want.  @xref{Breakpoint Menus}.
-
-@cindex overloading in C++
-@item rbreak @var{regex}
-Setting breakpoints using regular expressions is helpful for setting
-breakpoints on overloaded functions that are not members of any special
-classes. 
-@xref{Set Breaks}.
-
-@cindex C++ exception handling
-@item catch @var{exceptions}
-@itemx info catch
-Debug C++ exception handling using these commands.  @xref{Exception Handling}.
-
-@cindex inheritance 
-@item ptype @var{typename}
-Print inheritance relationships as well as other information for type
-@var{typename}. 
-@xref{Symbols}.
-
-@cindex C++ symbol display
-@item set print demangle
-@itemx show print demangle
-@itemx set print asm-demangle
-@itemx show print asm-demangle
-Control whether C++ symbols display in their source form, both when
-displaying code as C++ source and when displaying disassemblies.
-@xref{Print Settings}.
-
-@item set print object
-@itemx show print object
-Choose whether to print derived (actual) or declared types of objects. 
-@xref{Print Settings}.
-
-@item set print vtbl
-@itemx show print vtbl
-Control the format for printing virtual function tables.
-@xref{Print Settings}.
-
-@end table
-
-
-@node Modula-2,  , C, Support
-@subsection Modula-2
-@cindex Modula-2
-
-The extensions made to _GDBN__ to support Modula-2 support output
-from the GNU Modula-2 compiler (which is currently being developed).
-Other Modula-2 compilers are not currently supported, and attempting to
-debug executables produced by them will most likely result in an error
-as _GDBN__ reads in the executable's symbol table.
-
-@cindex expressions in Modula-2
-@menu
-* M2 Operators::                Built-in operators
-* Builtin Func/Proc::           Built-in Functions and Procedures
-* M2 Constants::                Modula-2 Constants
-* M2 Defaults::                 Default settings for Modula-2
-* Deviations::                  Deviations from standard Modula-2
-* M2 Checks::                   Modula-2 Type and Range Checks
-* M2 Scope::                    The scope operators @code{::} and @code{.}
-* GDB/M2::                      _GDBN__ and Modula-2
-@end menu
-
-@node M2 Operators, Builtin Func/Proc, Modula-2, Modula-2
-@subsubsection Operators
-@cindex Modula-2 operators
-
-Operators must be defined on values of specific types.  For instance,
-@code{+} is defined on numbers, but not on structures.  Operators are
-often defined on groups of types.  For the purposes of Modula-2, the
-following definitions hold:
-
-@itemize @bullet
-
-@item
-@emph{Integral types} consist of @code{INTEGER}, @code{CARDINAL}, and
-their subranges.
-
-@item
-@emph{Character types} consist of @code{CHAR} and its subranges.
-
-@item
-@emph{Floating-point types} consist of @code{REAL}.
-
-@item
-@emph{Pointer types} consist of anything declared as @code{POINTER TO
-@var{type}}.
-
-@item
-@emph{Scalar types} consist of all of the above.
-
-@item
-@emph{Set types} consist of @code{SET}s and @code{BITSET}s.
-
-@item
-@emph{Boolean types} consist of @code{BOOLEAN}.
-
-@end itemize
-
-@noindent
-The following operators are supported, and appear in order of
-increasing precedence:
-
-@table @code
-_0__
-@item ,
-Function argument or array index separator.
-
-@item :=
-Assignment.  The value of @var{var} @code{:=} @var{value} is
-@var{value}.
-
-@item <@r{, }>
-Less than, greater than on integral, floating-point, or enumerated
-types.
-
-@item <=@r{, }>=
-Less than, greater than, less than or equal to, greater than or equal to
-on integral, floating-point and enumerated types, or set inclusion on
-set types.  Same precedence as @code{<}.
-
-@item =@r{, }<>@r{, }#
-Equality and two ways of expressing inequality, valid on scalar types.
-Same precedence as @code{<}.  In _GDBN__ scripts, only @code{<>} is
-available for inequality, since @code{#} conflicts with the script
-comment character.
-
-@item IN
-Set membership.  Defined on set types and the types of their members.
-Same precedence as @code{<}.
-
-@item OR
-Boolean disjunction.  Defined on boolean types.
-
-@item AND@r{, }&
-Boolean conjuction.  Defined on boolean types.
-
-@item @@
-The _GDBN__ ``artificial array'' operator (@pxref{Expressions}).
-
-@item +@r{, }-
-Addition and subtraction on integral and floating-point types, or union
-and difference on set types.
-
-@item *
-Multiplication on integral and floating-point types, or set intersection
-on set types.
-
-@item /
-Division on floating-point types, or symmetric set difference on set
-types.  Same precedence as @code{*}.
-
-@item DIV@r{, }MOD
-Integer division and remainder.  Defined on integral types.  Same
-precedence as @code{*}.
-
-@item -
-Negative. Defined on @code{INTEGER}s and @code{REAL}s.
-
-@item ^
-Pointer dereferencing.  Defined on pointer types.  
-
-@item NOT
-Boolean negation.  Defined on boolean types.  Same precedence as
-@code{^}.
-
-@item .
-@code{RECORD} field selector.  Defined on @code{RECORD}s.  Same
-precedence as @code{^}.
-
-@item []
-Array indexing.  Defined on @code{ARRAY}s.  Same precedence as @code{^}.
-
-@item ()
-Procedure argument list.  Defined on @code{PROCEDURE}s.  Same precedence
-as @code{^}.
-
-@item ::@r{, }.
-_GDBN__ and Modula-2 scope operators.
-
-@end table
-
-@quotation
-@emph{Warning:} Sets and their operations are not yet supported, so _GDBN__
-will treat the use of the operator @code{IN}, or the use of operators
-@code{+}, @code{-}, @code{*}, @code{/}, @code{=}, , @code{<>}, @code{#},
-@code{<=}, and @code{>=} on sets as an error.
-@end quotation
-_1__
-
-@cindex Modula-2 builtins
-@node Builtin Func/Proc, M2 Constants, M2 Operators, Modula-2
-@subsubsection Built-in Functions and Procedures
-
-Modula-2 also makes available several built-in procedures and functions.
-In describing these, the following metavariables are used:
-
-@table @var
-
-@item a
-represents an @code{ARRAY} variable.
-
-@item c
-represents a @code{CHAR} constant or variable.
-
-@item i
-represents a variable or constant of integral type.
-
-@item m
-represents an identifier that belongs to a set.  Generally used in the
-same function with the metavariable @var{s}.  The type of @var{s} should
-be @code{SET OF @var{mtype}} (where @var{mtype} is the type of @var{m}.
-
-@item n
-represents a variable or constant of integral or floating-point type.
-
-@item r
-represents a variable or constant of floating-point type.
-
-@item t
-represents a type.
-
-@item v
-represents a variable.
-
-@item x
-represents a variable or constant of one of many types.  See the
-explanation of the function for details.
-
-@end table
-
-All Modula-2 built-in procedures also return a result, described below.
-
-@table @code
-@item ABS(@var{n})
-Returns the absolute value of @var{n}.
-
-@item CAP(@var{c})
-If @var{c} is a lower case letter, it returns its upper case
-equivalent, otherwise it returns its argument
-
-@item CHR(@var{i})
-Returns the character whose ordinal value is @var{i}.
-
-@item DEC(@var{v})
-Decrements the value in the variable @var{v}.  Returns the new value.
-
-@item DEC(@var{v},@var{i})
-Decrements the value in the variable @var{v} by @var{i}.  Returns the
-new value.
-
-@item EXCL(@var{m},@var{s})
-Removes the element @var{m} from the set @var{s}.  Returns the new
-set.
-
-@item FLOAT(@var{i})
-Returns the floating point equivalent of the integer @var{i}.
-
-@item HIGH(@var{a})
-Returns the index of the last member of @var{a}.
-
-@item INC(@var{v})
-Increments the value in the variable @var{v}.  Returns the new value.
-
-@item INC(@var{v},@var{i})
-Increments the value in the variable @var{v} by @var{i}.  Returns the
-new value.
-
-@item INCL(@var{m},@var{s})
-Adds the element @var{m} to the set @var{s} if it is not already
-there.  Returns the new set.
-
-@item MAX(@var{t})
-Returns the maximum value of the type @var{t}.
-
-@item MIN(@var{t})
-Returns the minimum value of the type @var{t}.
-
-@item ODD(@var{i})
-Returns boolean TRUE if @var{i} is an odd number.
-
-@item ORD(@var{x})
-Returns the ordinal value of its argument.  For example, the ordinal
-value of a character is its ASCII value (on machines supporting the
-ASCII character set).  @var{x} must be of an ordered type, which include
-integral, character and enumerated types.
-
-@item SIZE(@var{x})
-Returns the size of its argument.  @var{x} can be a variable or a type.
-
-@item TRUNC(@var{r})
-Returns the integral part of @var{r}.
-
-@item VAL(@var{t},@var{i})
-Returns the member of the type @var{t} whose ordinal value is @var{i}.
-@end table
-
-@quotation
-@emph{Warning:}  Sets and their operations are not yet supported, so
-_GDBN__ will treat the use of procedures @code{INCL} and @code{EXCL} as
-an error.
-@end quotation
-
-@cindex Modula-2 constants
-@node M2 Constants, M2 Defaults, Builtin Func/Proc, Modula-2
-@subsubsection Constants
-
-_GDBN__ allows you to express the constants of Modula-2 in the following
-ways:
-
-@itemize @bullet
-
-@item
-Integer constants are simply a sequence of digits.  When used in an
-expression, a constant is interpreted to be type-compatible with the
-rest of the expression.  Hexadecimal integers are specified by a
-trailing @samp{H}, and octal integers by a trailing @samp{B}.
-
-@item
-Floating point constants appear as a sequence of digits, followed by a
-decimal point and another sequence of digits.  An optional exponent can
-then be specified, in the form @samp{E@r{[}+@r{|}-@r{]}@var{nnn}}, where
-@samp{@r{[}+@r{|}-@r{]}@var{nnn}} is the desired exponent.  All of the
-digits of the floating point constant must be valid decimal (base 10)
-digits.
-
-@item
-Character constants consist of a single character enclosed by a pair of
-like quotes, either single (@code{'}) or double (@code{"}).  They may
-also be expressed by their ordinal value (their ASCII value, usually)
-followed by a @samp{C}.
-
-@item
-String constants consist of a sequence of characters enclosed by a pair
-of like quotes, either single (@code{'}) or double (@code{"}).  Escape
-sequences in the style of C are also allowed.  @xref{C Constants}, for a
-brief explanation of escape sequences.
-
-@item
-Enumerated constants consist of an enumerated identifier.
-
-@item
-Boolean constants consist of the identifiers @code{TRUE} and
-@code{FALSE}.
-
-@item
-Pointer constants consist of integral values only.
-
-@item
-Set constants are not yet supported.
-
-@end itemize
-
-@node M2 Defaults, Deviations, M2 Constants, Modula-2
-@subsubsection Modula-2 Defaults
-@cindex Modula-2 defaults
-
-If type and range checking are set automatically by _GDBN__, they 
-both default to @code{on} whenever the working language changes to 
-Modula-2.  This happens regardless of whether you, or _GDBN__,
-selected the working language.
-
-If you allow _GDBN__ to set the language automatically, then entering
-code compiled from a file whose name ends with @file{.mod} will set the
-working language to Modula-2. @xref{Automatically,,Having _GDBN__ set
-the language automatically}, for further details.
-
-@node Deviations, M2 Checks, M2 Defaults, Modula-2
-@subsubsection Deviations from Standard Modula-2
-@cindex Modula-2, deviations from
-
-A few changes have been made to make Modula-2 programs easier to debug.
-This is done primarily via loosening its type strictness:
-
-@itemize @bullet
-@item 
-Unlike in standard Modula-2, pointer constants can be formed by
-integers.  This allows you to modify pointer variables during
-debugging.  (In standard Modula-2, the actual address contained in a
-pointer variable is hidden from you; it can only be modified
-through direct assignment to another pointer variable or expression that
-returned a pointer.)
-
-@item 
-C escape sequences can be used in strings and characters to represent
-non-printable characters.  _GDBN__ will print out strings with these
-escape sequences embedded.  Single non-printable characters are
-printed using the @samp{CHR(@var{nnn})} format.
-
-@item
-The assignment operator (@code{:=}) returns the value of its right-hand
-argument.
-
-@item
-All builtin procedures both modify @emph{and} return their argument.
-
-@end itemize 
-
-@node M2 Checks, M2 Scope, Deviations, Modula-2
-@subsubsection Modula-2 Type and Range Checks
-@cindex Modula-2 checks
-
-@quotation
-@emph{Warning:} in this release, _GDBN__ does not yet perform type or
-range checking.
-@end quotation
-@c FIXME remove warning when type/range checks added
-
-_GDBN__ considers two Modula-2 variables type equivalent if:
-
-@itemize @bullet
-@item
-They are of types that have been declared equivalent via a @code{TYPE
-@var{t1} = @var{t2}} statement
-
-@item
-They have been declared on the same line.  (Note:  This is true of the
-GNU Modula-2 compiler, but it may not be true of other compilers.)
-
-@end itemize
-
-As long as type checking is enabled, any attempt to combine variables
-whose types are not equivalent is an error.
-
-Range checking is done on all mathematical operations, assignment, array
-index bounds, and all builtin functions and procedures.
-
-@node M2 Scope, GDB/M2, M2 Checks, Modula-2
-@subsubsection The scope operators @code{::} and @code{.}
-@cindex scope
-@kindex .
-@kindex ::
-
-There are a few subtle differences between the Modula-2 scope operator
-(@code{.}) and the _GDBN__ scope operator (@code{::}).  The two have
-similar syntax:
-
-@example
-
-@var{module} . @var{id}
-@var{scope} :: @var{id}
-
-@end example
-
-@noindent
-where @var{scope} is the name of a module or a procedure,
-@var{module} the name of a module, and @var{id} is any delcared
-identifier within the program, except another module.
-
-Using the @code{::} operator makes _GDBN__ search the scope
-specified by @var{scope} for the identifier @var{id}.  If it is not
-found in the specified scope, then _GDBN__ will search all scopes
-enclosing the one specified by @var{scope}.
-
-Using the @code{.} operator makes _GDBN__ search the current scope for
-the identifier specified by @var{id} that was imported from the
-definition module specified by @var{module}.  With this operator, it is
-an error if the identifier @var{id} was not imported from definition
-module @var{module}, or if @var{id} is not an identifier in
-@var{module}.
-
-@node GDB/M2,  , M2 Scope, Modula-2
-@subsubsection _GDBN__ and Modula-2
-
-Some _GDBN__ commands have little use when debugging Modula-2 programs.
-Five subcommands of @code{set print} and @code{show print} apply
-specifically to C and C++: @samp{vtbl}, @samp{demangle},
-@samp{asm-demangle}, @samp{object}, and @samp{union}.  The first four
-apply to C++, and the last to C's @code{union} type, which has no direct
-analogue in Modula-2.
-
-The @code{@@} operator (@pxref{Expressions}), while available
-while using any language, is not useful with Modula-2.  Its
-intent is to aid the debugging of @dfn{dynamic arrays}, which cannot be
-created in Modula-2 as they can in C or C++.  However, because an
-address can be specified by an integral constant, the construct
-@samp{@{@var{type}@}@var{adrexp}} is still useful.  (@pxref{Expressions})
-
-_0__
-@cindex @code{#} in Modula-2
-In _GDBN__ scripts, the Modula-2 inequality operator @code{#} is
-interpreted as the beginning of a comment.  Use @code{<>} instead.
-_1__
-
-
-@node Symbols, Altering, Languages, Top
-@chapter Examining the Symbol Table
-
-The commands described in this section allow you to inquire about the
-symbols (names of variables, functions and types) defined in your
-program.  This information is inherent in the text of your program and
-does not change as the program executes.  _GDBN__ finds it in your
-program's symbol table, in the file indicated when you started _GDBN__ 
-(@pxref{File Options}), or by one of the file-management commands
-(@pxref{Files}).
-
-@table @code
-@item info address @var{symbol}
-@kindex info address
-Describe where the data for @var{symbol} is stored.  For a register
-variable, this says which register it is kept in.  For a non-register
-local variable, this prints the stack-frame offset at which the variable
-is always stored.
-
-Note the contrast with @samp{print &@var{symbol}}, which does not work
-at all for a register variables, and for a stack local variable prints
-the exact address of the current instantiation of the variable.
-
-@item whatis @var{exp}
-@kindex whatis
-Print the data type of expression @var{exp}.  @var{exp} is not
-actually evaluated, and any side-effecting operations (such as
-assignments or function calls) inside it do not take place.
-@xref{Expressions}.
-
-@item whatis
-Print the data type of @code{$}, the last value in the value history.
-
-@item ptype @var{typename}
-@kindex ptype
-Print a description of data type @var{typename}.  @var{typename} may be
-the name of a type, or for C code it may have the form
-@samp{struct @var{struct-tag}}, @samp{union @var{union-tag}} or
-@samp{enum @var{enum-tag}}.@refill
-
-@item ptype @var{exp}
-Print a description of the type of expression @var{exp}.  @code{ptype}
-differs from @code{whatis} by printing a detailed description, instead of just
-the name of the type.  For example, if your program declares a variable
-as
-@example
-struct complex @{double real; double imag;@} v;
-@end example
-@noindent
-compare the output of the two commands:
-@example
-(_GDBP__) whatis v
-type = struct complex
-(_GDBP__) ptype v
-type = struct complex @{
-    double real;
-    double imag;
-@}
-@end example
-
-@item info types @var{regexp}
-@itemx info types
-@kindex info types 
-Print a brief description of all types whose name matches @var{regexp}
-(or all types in your program, if you supply no argument).  Each
-complete typename is matched as though it were a complete line; thus,
-@samp{i type value} gives information on all types in your program whose
-name includes the string @code{value}, but @samp{i type ^value$} gives
-information only on types whose complete name is @code{value}.
-
-This command differs from @code{ptype} in two ways: first, like
-@code{whatis}, it does not print a detailed description; second, it
-lists all source files where a type is defined.
-
-@item info source
-@kindex info source
-Show the name of the current source file---that is, the source file for
-the function containing the current point of execution---and the language
-it was written in.
-
-@item info sources
-@kindex info sources
-Print the names of all source files in the program for which there is
-debugging information, organized into two lists: files whose symbols
-have already been read, and files whose symbols will be read when needed.
-
-@item info functions
-@kindex info functions
-Print the names and data types of all defined functions.
-
-@item info functions @var{regexp}
-Print the names and data types of all defined functions
-whose names contain a match for regular expression @var{regexp}.
-Thus, @samp{info fun step} finds all functions whose names
-include @code{step}; @samp{info fun ^step} finds those whose names
-start with @code{step}.
-
-@item info variables
-@kindex info variables
-Print the names and data types of all variables that are declared
-outside of functions (i.e., excluding local variables).
-
-@item info variables @var{regexp}
-Print the names and data types of all variables (except for local
-variables) whose names contain a match for regular expression
-@var{regexp}.
-
-
-@ignore
-This was never implemented.
-@item info methods
-@itemx info methods @var{regexp}
-@kindex info methods
-The @code{info methods} command permits the user to examine all defined
-methods within C++ program, or (with the @var{regexp} argument) a
-specific set of methods found in the various C++ classes.  Many
-C++ classes provide a large number of methods.  Thus, the output
-from the @code{ptype} command can be overwhelming and hard to use.  The
-@code{info-methods} command filters the methods, printing only those
-which match the regular-expression @var{regexp}.
-@end ignore
-
-@item printsyms @var{filename}
-@kindex printsyms
-Write a dump of debugging symbol data into the file
-@var{filename}.  Only symbols with debugging data are included.  _GDBN__
-includes all the symbols it already knows about: that is, @var{filename}
-reflects symbols for only those files whose symbols _GDBN__ has read.
-You can find out which files these are using the command @code{info
-files}.  The description of @code{symbol-file} describes how _GDBN__
-reads symbols; both commands are described under @ref{Files}.
-@end table
-
-@node Altering, _GDBN__ Files, Symbols, Top
-@chapter Altering Execution
-
-Once you think you have found an error in the program, you might want to
-find out for certain whether correcting the apparent error would lead to
-correct results in the rest of the run.  You can find the answer by
-experiment, using the _GDBN__ features for altering execution of the
-program.
-
-For example, you can store new values into variables or memory
-locations, give the program a signal, restart it at a different address,
-or even return prematurely from a function to its caller.
-
-@menu
-* Assignment::                  Assignment to Variables
-* Jumping::                     Continuing at a Different Address
-* Signaling::                   Giving the Program a Signal
-* Returning::                   Returning from a Function
-* Calling::                     Calling your Program's Functions
-* Patching::                    Patching your Program
-@end menu
-
-@node Assignment, Jumping, Altering, Altering
-@section Assignment to Variables
-
-@cindex assignment
-@cindex setting variables
-To alter the value of a variable, evaluate an assignment expression.
-@xref{Expressions}.  For example,
-
-@example
-print x=4
-@end example
-
-@noindent
-would store the value 4 into the variable @code{x}, and then print the
-value of the assignment expression (which is 4).  @xref{Languages}, for
-more information on operators in supported languages.
-
-@kindex set variable
-@cindex variables, setting
-If you are not interested in seeing the value of the assignment, use the
-@code{set} command instead of the @code{print} command.  @code{set} is
-really the same as @code{print} except that the expression's value is not
-printed and is not put in the value history (@pxref{Value History}).  The
-expression is evaluated only for its effects.
-
-If the beginning of the argument string of the @code{set} command
-appears identical to a @code{set} subcommand, use the @code{set
-variable} command instead of just @code{set}.  This command is identical
-to @code{set} except for its lack of subcommands.  For example, a
-program might well have a variable @code{width}---which leads to
-an error if we try to set a new value with just @samp{set width=13}, as
-we might if @code{set width} didn't happen to be a _GDBN__ command:
-@example
-(_GDBP__) whatis width
-type = double
-(_GDBP__) p width
-$4 = 13
-(_GDBP__) set width=47
-Invalid syntax in expression.
-@end example
-@noindent
-The invalid expression, of course, is @samp{=47}.  What we can do in
-order to actually set our program's variable @code{width} is 
-@example
-(_GDBP__) set var width=47
-@end example
-
-_GDBN__ allows more implicit conversions in assignments than C does; you can
-freely store an integer value into a pointer variable or vice versa, and
-any structure can be converted to any other structure that is the same
-length or shorter.
-@comment FIXME: how do structs align/pad in these conversions? 
-@comment        /pesch@cygnus.com 18dec1990
-
-To store values into arbitrary places in memory, use the @samp{@{@dots{}@}}
-construct to generate a value of specified type at a specified address
-(@pxref{Expressions}).  For example, @code{@{int@}0x83040} refers
-to memory location @code{0x83040} as an integer (which implies a certain size
-and representation in memory), and
-
-@example
-set @{int@}0x83040 = 4
-@end example
-
-@noindent
-stores the value 4 into that memory location.
-
-@node Jumping, Signaling, Assignment, Altering
-@section Continuing at a Different Address
-
-Ordinarily, when you continue the program, you do so at the place where
-it stopped, with the @code{continue} command.  You can instead continue at
-an address of your own choosing, with the following commands:
-
-@table @code
-@item jump @var{linespec}
-@kindex jump
-Resume execution at line @var{linespec}.  Execution will stop
-immediately if there is a breakpoint there.  @xref{List} for a
-description of the different forms of @var{linespec}.
-
-The @code{jump} command does not change the current stack frame, or
-the stack pointer, or the contents of any memory location or any
-register other than the program counter.  If line @var{linespec} is in
-a different function from the one currently executing, the results may
-be bizarre if the two functions expect different patterns of arguments or
-of local variables.  For this reason, the @code{jump} command requests
-confirmation if the specified line is not in the function currently
-executing.  However, even bizarre results are predictable if you are
-well acquainted with the machine-language code of the program.
-
-@item jump *@var{address}
-Resume execution at the instruction at address @var{address}.
-@end table
-
-You can get much the same effect as the @code{jump} command by storing a
-new value into the register @code{$pc}.  The difference is that this
-does not start the program running; it only changes the address where it
-@emph{will} run when it is continued.  For example,
-
-@example
-set $pc = 0x485
-@end example
-
-@noindent
-causes the next @code{continue} command or stepping command to execute at
-address 0x485, rather than at the address where the program stopped.
-@xref{Continuing and Stepping}.
-
-The most common occasion to use the @code{jump} command is to back up,
-perhaps with more breakpoints set, over a portion of a program that has
-already executed, in order to examine its execution in more detail.
-
-@node Signaling, Returning, Jumping, Altering
-@c @group
-@section Giving the Program a Signal
-
-@table @code
-@item signal @var{signalnum}
-@kindex signal
-Resume execution where the program stopped, but give it immediately the
-signal number @var{signalnum}.
-
-Alternatively, if @var{signalnum} is zero, continue execution without
-giving a signal.  This is useful when the program stopped on account of
-a signal and would ordinary see the signal when resumed with the
-@code{continue} command; @samp{signal 0} causes it to resume without a
-signal.
-
-@code{signal} does not repeat when you press @key{RET} a second time
-after executing the command.
-@end table
-@c @end group
-
-@node Returning, Calling, Signaling, Altering
-@section Returning from a Function
-
-@table @code
-@item return
-@itemx return @var{expression}
-@cindex returning from a function
-@kindex return
-You can cancel execution of a function call with the @code{return}
-command.  If you give an
-@var{expression} argument, its value is used as the function's return
-value. 
-@end table
-
-When you use @code{return}, _GDBN__ discards the selected stack frame
-(and all frames within it).  You can think of this as making the
-discarded frame return prematurely.  If you wish to specify a value to
-be returned, give that value as the argument to @code{return}.
-
-This pops the selected stack frame (@pxref{Selection}), and any other
-frames inside of it, leaving its caller as the innermost remaining
-frame.  That frame becomes selected.  The specified value is stored in
-the registers used for returning values of functions.
-
-The @code{return} command does not resume execution; it leaves the
-program stopped in the state that would exist if the function had just
-returned.  In contrast, the @code{finish} command 
-(@pxref{Continuing and Stepping}) 
-resumes execution until the selected stack frame returns naturally.@refill
-
-@node     Calling, Patching, Returning, Altering
-@section Calling your Program's Functions
-
-@cindex calling functions
-@kindex call
-@table @code
-@item call @var{expr}
-Evaluate the expression @var{expr} without displaying @code{void}
-returned values.
-@end table
-
-You can use this variant of the @code{print} command if you want to
-execute a function from your program, but without cluttering the output
-with @code{void} returned values.  The result is printed and saved in
-the value history, if it is not void.
-
-@node Patching,  , Calling, Altering
-@section Patching your Program
-@cindex patching binaries
-@cindex writing into executables
-@cindex writing into corefiles
-By default, _GDBN__ opens the file containing your program's executable
-code (or the corefile) read-only.  This prevents accidental alterations
-to machine code; but it also prevents you from intentionally patching
-your program's binary.
-
-If you'd like to be able to patch the binary, you can specify that
-explicitly with the @code{set write} command.  For example, you might
-want to turn on internal debugging flags, or even to make emergency
-repairs. 
-
-@table @code
-@item set write on
-@itemx set write off
-@kindex set write
-If you specify @samp{set write on}, _GDBN__ will open executable and
-core files for both reading and writing; if you specify @samp{set write
-off} (the default), _GDBN__ will open them read-only.
-
-If you've already loaded a file, you must load it
-again (using the @code{exec-file} or @code{core-file} command) after
-changing @code{set write}, for your new setting to take effect.
-
-@item show write
-@kindex show write
-Display whether executable files and core files will be opened for
-writing as well as reading.
-
-@end table
-
-@node _GDBN__ Files, Targets, Altering, Top
-@chapter _GDBN__'s Files
-
-@menu
-* Files::                       Commands to Specify Files
-* Symbol Errors::               Errors Reading Symbol Files
-@end menu
-
-@node Files, Symbol Errors, _GDBN__ Files, _GDBN__ Files
-@section Commands to Specify Files
-@cindex core dump file
-@cindex symbol table
-_GDBN__ needs to know the file name of the program to be debugged, both in
-order to read its symbol table and in order to start the program.  To
-debug a core dump of a previous run, _GDBN__ must be told the file name of
-the core dump.
-
-The usual way to specify the executable and core dump file names is with
-the command arguments given when you start _GDBN__, as discussed in
-@pxref{Invocation}.
-
-Occasionally it is necessary to change to a different file during a
-_GDBN__ session.  Or you may run _GDBN__ and forget to specify the files you
-want to use.  In these situations the _GDBN__ commands to specify new files
-are useful.
-
-@table @code
-@item file @var{filename}
-@cindex executable file
-@kindex file
-Use @var{filename} as the program to be debugged.  It is read for its
-symbols and for the contents of pure memory.  It is also the program
-executed when you use the @code{run} command.  If you do not specify a
-directory and the file is not found in _GDBN__'s working directory,
-
-_GDBN__ uses the environment variable @code{PATH} as a list of
-directories to search, just as the shell does when looking for a program
-to run.  You can change the value of this variable, for both _GDBN__ and
-your program, using the @code{path} command.
-
-@code{file} with no argument makes _GDBN__ discard any information it
-has on both executable file and the symbol table.
-
-@item exec-file @var{filename}
-@kindex exec-file
-Specify that the program to be run (but not the symbol table) is found
-in @var{filename}.  _GDBN__ will search the environment variable @code{PATH}
-if necessary to locate the program.  
-
-@item symbol-file @var{filename}
-@kindex symbol-file
-Read symbol table information from file @var{filename}.  @code{PATH} is
-searched when necessary.  Use the @code{file} command to get both symbol
-table and program to run from the same file.
-
-@code{symbol-file} with no argument clears out _GDBN__'s information on your
-program's symbol table.
-
-The @code{symbol-file} command causes _GDBN__ to forget the contents of its
-convenience variables, the value history, and all breakpoints and
-auto-display expressions.  This is because they may contain pointers to
-the internal data recording symbols and data types, which are part of
-the old symbol table data being discarded inside _GDBN__.
-
-@code{symbol-file} will not repeat if you press @key{RET} again after
-executing it once.
-
-On some kinds of object files, the @code{symbol-file} command does not
-actually read the symbol table in full right away.  Instead, it scans
-the symbol table quickly to find which source files and which symbols
-are present.  The details are read later, one source file at a time,
-when they are needed.
-
-The purpose of this two-stage reading strategy is to make _GDBN__ start up
-faster.  For the most part, it is invisible except for occasional pauses
-while the symbol table details for a particular source file are being
-read.  (The @code{set verbose} command can turn these pauses into
-messages if desired. @xref{Messages/Warnings}).
-
-When the symbol table is stored in COFF format, @code{symbol-file} does
-read the symbol table data in full right away.  We haven't implemented
-the two-stage strategy for COFF yet.
-
-When _GDBN__ is configured for a particular environment, it will
-understand debugging information in whatever format is the standard
-generated for that environment; you may use either a GNU compiler, or
-other compilers that adhere to the local conventions.  Best results are
-usually obtained from GNU compilers; for example, using @code{_GCC__}
-you can generate debugging information for optimized code.
-
-@item core-file @var{filename}
-@itemx core @var{filename}
-@kindex core
-@kindex core-file
-Specify the whereabouts of a core dump file to be used as the ``contents
-of memory''.  Traditionally, core files contain only some parts of the
-address space of the process that generated them; _GDBN__ can access the
-executable file itself for other parts.
-
-@code{core-file} with no argument specifies that no core file is
-to be used.
-
-Note that the core file is ignored when your program is actually running
-under _GDBN__.  So, if you have been running the program and you wish to
-debug a core file instead, you must kill the subprocess in which the
-program is running.  To do this, use the @code{kill} command
-(@pxref{Kill Process}).
-
-@item load @var{filename}
-@kindex load
-_if__(_GENERIC__)
-Depending on what remote debugging facilities are configured into
-_GDBN__, the @code{load} command may be available.  Where it exists, it
-is meant to make @var{filename} (an executable) available for debugging
-on the remote system---by downloading, or dynamic linking, for example.
-@code{load} also records @var{filename}'s symbol table in _GDBN__, like
-the @code{add-symbol-file} command.
-
-If @code{load} is not available on your _GDBN__, attempting to execute
-it gets the error message ``@code{You can't do that when your target is
-@dots{}}'' 
-_fi__(_GENERIC__)
-
-_if__(_VXWORKS__) 
-On VxWorks, @code{load} will dynamically link @var{filename} on the
-current target system as well as adding its symbols in _GDBN__.
-_fi__(_VXWORKS__)
-
-_if__(_I960__)
-@cindex download to Nindy-960
-With the Nindy interface to an Intel 960 board, @code{load} will
-download @var{filename} to the 960 as well as adding its symbols in
-_GDBN__. 
-_fi__(_I960__)
-
-@code{load} will not repeat if you press @key{RET} again after using it.
-
-@item add-symbol-file @var{filename} @var{address}
-@kindex add-symbol-file
-@cindex dynamic linking
-The @code{add-symbol-file} command reads additional symbol table information
-from the file @var{filename}.  You would use this command when @var{filename}
-has been dynamically loaded (by some other means) into the program that
-is running.  @var{address} should be the memory address at which the
-file has been loaded; _GDBN__ cannot figure this out for itself.
-
-The symbol table of the file @var{filename} is added to the symbol table
-originally read with the @code{symbol-file} command.  You can use the
-@code{add-symbol-file} command any number of times; the new symbol data thus
-read keeps adding to the old.  To discard all old symbol data instead,
-use the @code{symbol-file} command. 
-
-@code{add-symbol-file} will not repeat if you press @key{RET} after using it.
-
-@item info files
-@itemx info target
-@kindex info files
-@kindex info target
-@code{info files} and @code{info target} are synonymous; both print the
-current targets (@pxref{Targets}), including the names of the executable
-and core dump files currently in use by _GDBN__, and the files from
-which symbols were loaded.  The command @code{help targets} lists all
-possible targets rather than current ones.
-
-@end table
-
-All file-specifying commands allow both absolute and relative file names
-as arguments.  _GDBN__ always converts the file name to an absolute path
-name and remembers it that way.
-
-@cindex shared libraries
-
-_GDBN__ supports the SunOS shared library format.  _GDBN__ automatically
-loads symbol definitions from shared libraries when you use the
-@code{run} command, or when you examine a core file.  (Before you issue
-the @code{run} command, _GDBN__ won't understand references to a
-function in a shared library, however---unless you're debugging a core
-file).
-@c FIXME: next _GDBN__ release should permit some refs to undef
-@c FIXME...symbols---eg in a break cmd---assuming they're from a shared lib
-
-@table @code
-@item info share
-@itemx info sharedlibrary
-@kindex info sharedlibrary
-@kindex info share
-Print the names of the shared libraries which are currently loaded.
-
-@item sharedlibrary @var{regex}
-@itemx share @var{regex}
-@kindex sharedlibrary
-@kindex share
-This is an obsolescent command; you can use it to explicitly
-load shared object library symbols for files matching a UNIX regular
-expression, but as with files loaded automatically, it will only load
-shared libraries required by your program for a core file or after
-typing @code{run}.  If @var{regex} is omitted all shared libraries
-required by your program are loaded.
-@end table
-
-@node Symbol Errors,  , Files, _GDBN__ Files
-@section Errors Reading Symbol Files
-While reading a symbol file, _GDBN__ will occasionally encounter
-problems, such as symbol types it does not recognize, or known bugs in
-compiler output.  By default, _GDBN__ does not notify you of such
-problems, since they're relatively common and primarily of interest to
-people debugging compilers.  If you are interested in seeing information
-about ill-constructed symbol tables, you can either ask _GDBN__ to print
-only one message about each such type of problem, no matter how many
-times the problem occurs; or you can ask _GDBN__ to print more messages,
-to see how many times the problems occur, with the @code{set complaints}
-command (@xref{Messages/Warnings}).
-
-The messages currently printed, and their meanings, are:
-
-@table @code
-@item inner block not inside outer block in @var{symbol}
-
-The symbol information shows where symbol scopes begin and end
-(such as at the start of a function or a block of statements).  This
-error indicates that an inner scope block is not fully contained
-in its outer scope blocks.  
-
-_GDBN__ circumvents the problem by treating the inner block as if it had
-the same scope as the outer block.  In the error message, @var{symbol}
-may be shown as ``@code{(don't know)}'' if the outer block is not a
-function.
-
-@item block at @var{address} out of order
-
-The symbol information for symbol scope blocks should occur in 
-order of increasing addresses.  This error indicates that it does not
-do so.  
-
-_GDBN__ does not circumvent this problem, and will have trouble locating
-symbols in the source file whose symbols being read.  (You can often
-determine what source file is affected by specifying @code{set verbose
-on}.  @xref{Messages/Warnings}.)
-
-@item bad block start address patched
-
-The symbol information for a symbol scope block has a start address
-smaller than the address of the preceding source line.  This is known
-to occur in the SunOS 4.1.1 (and earlier) C compiler.  
-
-_GDBN__ circumvents the problem by treating the symbol scope block as
-starting on the previous source line.
-
-@item bad string table offset in symbol @var{n}
-
-@cindex foo
-Symbol number @var{n} contains a pointer into the string table which is
-larger than the size of the string table.  
-
-_GDBN__ circumvents the problem by considering the symbol to have the
-name @code{foo}, which may cause other problems if many symbols end up
-with this name.
-
-@item unknown symbol type @code{0x@var{nn}}
-
-The symbol information contains new data types that _GDBN__ does not yet
-know how to read.  @code{0x@var{nn}} is the symbol type of the misunderstood
-information, in hexadecimal.  
-
-_GDBN__ circumvents the error by ignoring this symbol information.  This
-will usually allow the program to be debugged, though certain symbols
-will not be accessible.  If you encounter such a problem and feel like
-debugging it, you can debug @code{_GDBP__} with itself, breakpoint on
-@code{complain}, then go up to the function @code{read_dbx_symtab} and
-examine @code{*bufp} to see the symbol.
-
-@item stub type has NULL name
-_GDBN__ could not find the full definition for a struct or class. 
-
-@ignore
-@c this is #if 0'd in dbxread.c as of (at least!) 17 may 1991
-@item const/volatile indicator missing, got '@var{X}'
-
-The symbol information for a C++ member function is missing some
-information that the compiler should have output for it.
-@end ignore
-
-@item C++ type mismatch between compiler and debugger
-
-_GDBN__ could not parse a type specification output by the compiler
-for some C++ object.
-
-@end table
-
-@node     Targets, Controlling _GDBN__, _GDBN__ Files, Top
-@chapter Specifying a Debugging Target 
-@cindex debugging target
-@kindex target
-A @dfn{target} is an interface between the debugger and a particular 
-kind of file or process.  
-
-Often, you will be able to run _GDBN__ in the same host environment as the
-program you are debugging; in that case, the debugging target can just be
-specified as a side effect of the @code{file} or @code{core} commands.
-When you need more flexibility---for example, running _GDBN__ on a
-physically separate host, controlling standalone systems over a
-serial port, or realtime systems over a TCP/IP connection---you can use
-the @code{target} command.
-
-@menu
-* Active Targets::              Active Targets
-* Target Commands::             Commands for Managing Targets
-* Remote::                      Remote Debugging
-@end menu
-
-@node Active Targets, Target Commands, Targets, Targets
-@section Active Targets
-@cindex stacking targets
-@cindex active targets
-@cindex multiple targets
-
-Targets are managed in three @dfn{strata} that correspond to different
-classes of target: processes, core files, and executable files.  This
-allows you to (for example) start a process and inspect its activity
-without abandoning your work on a core file.
-
-More than one target can potentially respond to a request.  In
-particular, when you access memory _GDBN__ will examine the three strata of
-targets until it finds a target that can handle that particular address.
-Strata are always examined in a fixed order: first a process if there is
-one, then a core file if there is one, and finally an executable file if
-there is one of those.
-
-When you specify a new target in a given stratum, it replaces any target
-previously in that stratum.
-
-To get rid of a target without replacing it, use the @code{detach}
-command.  The related command @code{attach} provides you with a way of
-choosing a particular running process as a new target. @xref{Attach}.
-
-@node Target Commands, Remote, Active Targets, Targets
-@section Commands for Managing Targets
-
-@table @code
-@item target @var{type} @var{parameters}
-Connects the _GDBN__ host environment to a target machine or process.  A
-target is typically a protocol for talking to debugging facilities.  You
-use the argument @var{type} to specify the type or protocol of the
-target machine.
-
-Further @var{parameters} are interpreted by the target protocol, but
-typically include things like device names or host names to connect
-with, process numbers, and baud rates.  
-
-The @code{target} command will not repeat if you press @key{RET} again
-after executing the command.
-
-@item help target
-@kindex help target
-Displays the names of all targets available.  To display targets
-currently selected, use either @code{info target} or @code{info files}
-(@pxref{Files}).
-
-@item help target @var{name}
-Describe a particular target, including any parameters necessary to
-select it.
-@end table
-
-Here are some common targets (available, or not, depending on the _GDBN__
-configuration):
-
-@table @code
-@item target exec @var{prog}
-@kindex target exec
-An executable file.  @samp{target exec @var{prog}} is the same as
-@samp{exec-file @var{prog}}.
-
-@item target core @var{filename}
-@kindex target core
-A core dump file.  @samp{target core @var{filename}} is the same as
-@samp{core-file @var{filename}}.
-
-@item target remote @var{dev}
-@kindex target remote
-Remote serial target in _GDBN__-specific protocol.  The argument @var{dev}
-specifies what serial device to use for the connection (e.g.
-@file{/dev/ttya}). @xref{Remote}.
-
-_if__(_AMD29K__)
-@item target amd-eb @var{dev} @var{speed} @var{PROG}
-@kindex target amd-eb
-@cindex AMD EB29K
-Remote PC-resident AMD EB29K board, attached over serial lines.
-@var{dev} is the serial device, as for @code{target remote};
-@var{speed} allows you to specify the linespeed; and @var{PROG} is the
-name of the program to be debugged, as it appears to DOS on the PC.
-@xref{EB29K Remote}.
-
-_fi__(_AMD29K__)
-_if__(_I960__)
-@item target nindy @var{devicename}
-@kindex target nindy
-An Intel 960 board controlled by a Nindy Monitor.  @var{devicename} is
-the name of the serial device to use for the connection, e.g.
-@file{/dev/ttya}.  @xref{i960-Nindy Remote}.
-
-_fi__(_I960__)
-_if__(_VXWORKS__)
-@item target vxworks @var{machinename}
-@kindex target vxworks
-A VxWorks system, attached via TCP/IP.  The argument @var{machinename}
-is the target system's machine name or IP address.
-@xref{VxWorks Remote}.
-_fi__(_VXWORKS__)
-@end table
-
-_if__(_GENERIC__)
-Different targets are available on different configurations of _GDBN__; your
-configuration may have more or fewer targets.
-_fi__(_GENERIC__)
-
-@node Remote,  , Target Commands, Targets
-@section Remote Debugging
-@cindex remote debugging
-
-_if__(_GENERIC__)
-@menu
-_include__(gdbinv-m.m4)<>_dnl__
-@end menu
-_fi__(_GENERIC__)
-
-If you are trying to debug a program running on a machine that can't run
-_GDBN__ in the usual way, it is often useful to use remote debugging.  For
-example, you might use remote debugging on an operating system kernel, or on
-a small system which does not have a general purpose operating system
-powerful enough to run a full-featured debugger.  
-
-Some configurations of _GDBN__ have special serial or TCP/IP interfaces
-to make this work with particular debugging targets.  In addition,
-_GDBN__ comes with a generic serial protocol (specific to _GDBN__, but
-not specific to any particular target system) which you can use if you
-write the remote stubs---the code that will run on the remote system to
-communicate with _GDBN__.
-
-To use the _GDBN__ remote serial protocol, the program to be debugged on
-the remote machine needs to contain a debugging stub which talks to
-_GDBN__ over the serial line.  Several working remote stubs are
-distributed with _GDBN__; see the @file{README} file in the _GDBN__
-distribution for more information.
-
-For details of this communication protocol, see the comments in the
-_GDBN__ source file @file{remote.c}.
-
-To start remote debugging, first run _GDBN__ and specify as an executable file
-the program that is running in the remote machine.  This tells _GDBN__ how
-to find the program's symbols and the contents of its pure text.  Then
-establish communication using the @code{target remote} command with a device
-name as an argument.  For example:
-
-@example
-target remote /dev/ttyb
-@end example
-
-@noindent
-if the serial line is connected to the device named @file{/dev/ttyb}.  This
-will stop the remote machine if it is not already stopped.
-
-Now you can use all the usual commands to examine and change data and to
-step and continue the remote program.
-
-To resume the remote program and stop debugging it, use the @code{detach}
-command.
-
-Other remote targets may be available in your
-configuration of _GDBN__; use @code{help targets} to list them.  
-
-_if__(_GENERIC__)
-@c Text on starting up GDB in various specific cases; it goes up front
-@c in manuals configured for any of those particular situations, here
-@c otherwise. 
-_include__(gdbinv-s.m4)
-_fi__(_GENERIC__)
-
-@node Controlling _GDBN__, Sequences, Targets, Top
-@chapter Controlling _GDBN__
-
-You can alter many aspects of _GDBN__'s interaction with you by using
-the @code{set} command.  For commands controlling how _GDBN__ displays
-data, @pxref{Print Settings}; other settings are described here.
-
-@menu
-* Prompt::                      Prompt
-* Editing::                     Command Editing
-* History::                     Command History
-* Screen Size::                 Screen Size
-* Numbers::                     Numbers
-* Messages/Warnings::           Optional Warnings and Messages
-@end menu
-
-@node Prompt, Editing, Controlling _GDBN__, Controlling _GDBN__
-@section Prompt
-@cindex prompt
-_GDBN__ indicates its readiness to read a command by printing a string
-called the @dfn{prompt}.  This string is normally @samp{(_GDBP__)}.  You
-can change the prompt string with the @code{set prompt} command.  For
-instance, when debugging _GDBN__ with _GDBN__, it is useful to change
-the prompt in one of the _GDBN__<>s so that you can always tell which
-one you are talking to.
-
-@table @code
-@item set prompt @var{newprompt}
-@kindex set prompt
-Directs _GDBN__ to use @var{newprompt} as its prompt string henceforth.
-@kindex show prompt
-@item show prompt
-Prints a line of the form: @samp{Gdb's prompt is: @var{your-prompt}}
-@end table
-
-@node Editing, History, Prompt, Controlling _GDBN__
-@section Command Editing
-@cindex readline
-@cindex command line editing
-_GDBN__ reads its input commands via the @dfn{readline} interface.  This
-GNU library provides consistent behavior for programs which provide a
-command line interface to the user.  Advantages are @code{emacs}-style
-or @code{vi}-style inline editing of commands, @code{csh}-like history
-substitution, and a storage and recall of command history across
-debugging sessions.
-
-You may control the behavior of command line editing in _GDBN__ with the
-command @code{set}.  
-
-@table @code
-@kindex set editing
-@cindex editing
-@item set editing
-@itemx set editing on
-Enable command line editing (enabled by default).
-
-@item set editing off
-Disable command line editing.
-
-@kindex show editing
-@item show editing
-Show whether command line editing is enabled.
-@end table
-
-@node History, Screen Size, Editing, Controlling _GDBN__
-@section Command History
-@table @code
-@cindex history substitution
-@cindex history file
-@kindex set history filename
-@item set history filename @var{fname}
-Set the name of the _GDBN__ command history file to @var{fname}.  This is
-the file from which _GDBN__ will read an initial command history
-list or to which it will write this list when it exits.  This list is
-accessed through history expansion or through the history
-command editing characters listed below.  This file defaults to the
-value of the environment variable @code{GDBHISTFILE}, or to
-@file{./.gdb_history} if this variable is not set.
-
-@cindex history save
-@kindex set history save
-@item set history save
-@itemx set history save on
-Record command history in a file, whose name may be specified with the
-@code{set history filename} command.  By default, this option is disabled.
-
-@item set history save off
-Stop recording command history in a file.
-
-@cindex history size
-@kindex set history size
-@item set history size @var{size}
-Set the number of commands which _GDBN__ will keep in its history list.
-This defaults to the value of the environment variable
-@code{HISTSIZE}, or to 256 if this variable is not set.
-@end table
-
-@cindex history expansion
-History expansion assigns special meaning to the character @kbd{!}.
-@iftex
-(@xref{Event Designators}.)
-@end iftex
-Since @kbd{!} is also the logical not operator in C, history expansion
-is off by default. If you decide to enable history expansion with the
-@code{set history expansion on} command, you may sometimes need to
-follow @kbd{!} (when it is used as logical not, in an expression) with
-a space or a tab to prevent it from being expanded.  The readline
-history facilities will not attempt substitution on the strings
-@kbd{!=} and @kbd{!(}, even when history expansion is enabled.
-
-The commands to control history expansion are:
-
-@table @code
-
-@kindex set history expansion
-@item set history expansion on
-@itemx set history expansion
-Enable history expansion.  History expansion is off by default.
-
-@item set history expansion off
-Disable history expansion.
-
-The readline code comes with more complete documentation of
-editing and history expansion features.  Users unfamiliar with @code{emacs}
-or @code{vi} may wish to read it. 
-@iftex
-@xref{Command Line Editing}.
-@end iftex
-
-@c @group
-@kindex show history
-@item show history
-@itemx show history filename
-@itemx show history save
-@itemx show history size
-@itemx show history expansion
-These commands display the state of the _GDBN__ history parameters.
-@code{show history} by itself displays all four states.
-@c @end group
-
-@end table
-
-@table @code
-@kindex show commands
-@item show commands
-Display the last ten commands in the command history.
-
-@item show commands @var{n}
-Print ten commands centered on command number @var{n}.
-
-@item show commands +
-Print ten commands just after the commands last printed.
-
-@end table
-
-@node Screen Size, Numbers, History, Controlling _GDBN__
-@section Screen Size
-@cindex size of screen
-@cindex pauses in output
-Certain commands to _GDBN__ may produce large amounts of information
-output to the screen.  To help you read all of it, _GDBN__ pauses and
-asks you for input at the end of each page of output.  Type @key{RET}
-when you want to continue the output.  _GDBN__ also uses the screen
-width setting to determine when to wrap lines of output.  Depending on
-what is being printed, it tries to break the line at a readable place,
-rather than simply letting it overflow onto the following line.
-
-Normally _GDBN__ knows the size of the screen from the termcap data base
-together with the value of the @code{TERM} environment variable and the
-@code{stty rows} and @code{stty cols} settings. If this is not correct,
-you can override it with the @code{set height} and @code{set
-width} commands:
-
-@table @code
-@item set height @var{lpp}
-@itemx show height
-@itemx set width @var{cpl}
-@itemx show width
-@kindex set height
-@kindex set width
-@kindex show width
-@kindex show height
-These @code{set} commands specify a screen height of @var{lpp} lines and
-a screen width of @var{cpl} characters.  The associated @code{show}
-commands display the current settings.
-
-If you specify a height of zero lines, _GDBN__ will not pause during output
-no matter how long the output is.  This is useful if output is to a file
-or to an editor buffer.
-@end table
-
-@node Numbers, Messages/Warnings, Screen Size, Controlling _GDBN__
-@section Numbers
-@cindex number representation
-@cindex entering numbers
-You can always enter numbers in octal, decimal, or hexadecimal in _GDBN__ by
-the usual conventions: octal numbers begin with @samp{0}, decimal
-numbers end with @samp{.}, and hexadecimal numbers begin with @samp{0x}.
-Numbers that begin with none of these are, by default, entered in base
-10; likewise, the default display for numbers---when no particular
-format is specified---is base 10.  You can change the default base for
-both input and output with the @code{set radix} command.
-
-@table @code
-@kindex set radix
-@item set radix @var{base}
-Set the default base for numeric input and display.  Supported choices
-for @var{base} are decimal 2, 8, 10, 16.  @var{base} must itself be
-specified either unambiguously or using the current default radix; for
-example, any of
-
-@example
-set radix 1010
-set radix 012
-set radix 10.
-set radix 0xa
-@end example
-
-@noindent
-will set the base to decimal.  On the other hand, @samp{set radix 10}
-will leave the radix unchanged no matter what it was.
-
-@kindex show radix
-@item show radix
-Display the current default base for numeric input and display.
-
-@end table
-
-@node Messages/Warnings,  , Numbers, Controlling _GDBN__
-@section Optional Warnings and Messages
-By default, _GDBN__ is silent about its inner workings.  If you are running
-on a slow machine, you may want to use the @code{set verbose} command.
-It will make _GDBN__ tell you when it does a lengthy internal operation, so
-you won't think it has crashed.
-
-Currently, the messages controlled by @code{set verbose} are those which
-announce that the symbol table for a source file is being read
-(@pxref{Files}, in the description of the command
-@code{symbol-file}).
-@c The following is the right way to do it, but emacs 18.55 doesn't support
-@c @ref, and neither the emacs lisp manual version of texinfmt or makeinfo
-@c is released.  
-@ignore
-see @code{symbol-file} in @ref{Files}).
-@end ignore
-
-@table @code
-@kindex set verbose
-@item set verbose on
-Enables _GDBN__'s output of certain informational messages.
-
-@item set verbose off
-Disables _GDBN__'s output of certain informational messages.
-
-@kindex show verbose
-@item show verbose
-Displays whether @code{set verbose} is on or off.
-@end table
-
-By default, if _GDBN__ encounters bugs in the symbol table of an object
-file, it is silent; but if you are debugging a compiler, you may find
-this information useful (@pxref{Symbol Errors}).  
-
-@table @code
-@kindex set complaints
-@item set complaints @var{limit}
-Permits _GDBN__ to output @var{limit} complaints about each type of unusual
-symbols before becoming silent about the problem.  Set @var{limit} to
-zero to suppress all complaints; set it to a large number to prevent
-complaints from being suppressed.
-
-@kindex show complaints
-@item show complaints
-Displays how many symbol complaints _GDBN__ is permitted to produce.
-@end table
-
-By default, _GDBN__ is cautious, and asks what sometimes seem to be a
-lot of stupid questions to confirm certain commands.  For example, if
-you try to run a program which is already running:
-@example
-(_GDBP__) run
-The program being debugged has been started already.
-Start it from the beginning? (y or n) 
-@end example
-
-If you're willing to unflinchingly face the consequences of your own
-commands, you can disable this ``feature'':
-
-@table @code
-@kindex set confirm
-@cindex flinching
-@cindex confirmation
-@cindex stupid questions
-@item set confirm off
-Disables confirmation requests.
-
-@item set confirm on
-Enables confirmation requests (the default).
-
-@item show confirm
-@kindex show confirm
-Displays state of confirmation requests.
-@end table
-
-@c FIXME this doesn't really belong here.  But where *does* it belong?
-@cindex reloading symbols
-Some systems allow individual object files that make up your program to
-be replaced without stopping and restarting your program.
-_if__(_VXWORKS__)
-For example, in VxWorks you can simply recompile a defective object file
-and keep on running.
-_fi__(_VXWORKS__)
-If you're running on one of these systems, you can allow _GDBN__ to
-reload the symbols for automatically relinked modules:@refill
-@table @code
-@kindex set symbol-reloading
-@item set symbol-reloading on
-Replace symbol definitions for the corresponding source file when an
-object file with a particular name is seen again.
-
-@item set symbol-reloading off
-Don't replace symbol definitions when re-encountering object files of
-the same name.  This is the default state; if you're not running on a
-system that permits automatically relinking modules, you should leave
-@code{symbol-reloading} off, since otherwise _GDBN__ may discard symbols
-when linking large programs, that may contain several modules (from
-different directories or libraries) with the same name.
-
-@item show symbol-reloading
-Show the current @code{on} or @code{off} setting.
-@end table
-
-@node Sequences, Emacs, Controlling _GDBN__, Top
-@chapter Canned Sequences of Commands
-
-Aside from breakpoint commands (@pxref{Break Commands}), _GDBN__ provides two
-ways to store sequences of commands for execution as a unit:
-user-defined commands and command files.
-
-@menu
-* Define::                      User-Defined Commands
-* Command Files::               Command Files
-* Output::                      Commands for Controlled Output
-@end menu
-
-@node Define, Command Files, Sequences, Sequences
-@section User-Defined Commands
-
-@cindex user-defined command
-A @dfn{user-defined command} is a sequence of _GDBN__ commands to which you
-assign a new name as a command.  This is done with the @code{define}
-command.
-
-@table @code
-@item define @var{commandname}
-@kindex define
-Define a command named @var{commandname}.  If there is already a command
-by that name, you are asked to confirm that you want to redefine it.
-
-The definition of the command is made up of other _GDBN__ command lines,
-which are given following the @code{define} command.  The end of these
-commands is marked by a line containing @code{end}.
-
-@item document @var{commandname}
-@kindex document
-Give documentation to the user-defined command @var{commandname}.  The
-command @var{commandname} must already be defined.  This command reads
-lines of documentation just as @code{define} reads the lines of the
-command definition, ending with @code{end}.  After the @code{document}
-command is finished, @code{help} on command @var{commandname} will print
-the documentation you have specified.
-
-You may use the @code{document} command again to change the
-documentation of a command.  Redefining the command with @code{define}
-does not change the documentation.
-
-@item help user-defined
-@kindex help user-defined
-List all user-defined commands, with the first line of the documentation
-(if any) for each.
-
-@item info user
-@itemx info user @var{commandname}
-@kindex info user
-Display the _GDBN__ commands used to define @var{commandname} (but not its
-documentation).  If no @var{commandname} is given, display the
-definitions for all user-defined commands.
-@end table
-
-User-defined commands do not take arguments.  When they are executed, the
-commands of the definition are not printed.  An error in any command
-stops execution of the user-defined command.
-
-Commands that would ask for confirmation if used interactively proceed
-without asking when used inside a user-defined command.  Many _GDBN__ commands
-that normally print messages to say what they are doing omit the messages
-when used in a user-defined command.
-
-@node Command Files, Output, Define, Sequences
-@section Command Files
-
-@cindex command files
-A command file for _GDBN__ is a file of lines that are _GDBN__ commands.  Comments
-(lines starting with @kbd{#}) may also be included.  An empty line in a
-command file does nothing; it does not mean to repeat the last command, as
-it would from the terminal.
-
-@cindex init file
-@cindex @file{_GDBINIT__}
-When you start _GDBN__, it automatically executes commands from its
-@dfn{init files}.  These are files named @file{_GDBINIT__}.  _GDBN__
-reads the init file (if any) in your home directory and then the init
-file (if any) in the current working directory.  (The init files are not
-executed if you use the @samp{-nx} option; @pxref{Mode Options}.)  You
-can also request the execution of a command file with the @code{source}
-command:
-
-@table @code
-@item source @var{filename}
-@kindex source
-Execute the command file @var{filename}.
-@end table
-
-The lines in a command file are executed sequentially.  They are not
-printed as they are executed.  An error in any command terminates execution
-of the command file.
-
-Commands that would ask for confirmation if used interactively proceed
-without asking when used in a command file.  Many _GDBN__ commands that
-normally print messages to say what they are doing omit the messages
-when called from command files.
-
-@node Output,  , Command Files, Sequences
-@section Commands for Controlled Output
-
-During the execution of a command file or a user-defined command, normal
-_GDBN__ output is suppressed; the only output that appears is what is
-explicitly printed by the commands in the definition.  This section
-describes three commands useful for generating exactly the output you
-want.
-
-@table @code
-@item echo @var{text}
-@kindex echo
-@c I don't consider backslash-space a standard C escape sequence
-@c because it's not in ANSI.
-Print @var{text}.  Nonprinting characters can be included in @var{text}
-using C escape sequences, such as @samp{\n} to print a newline.  @b{No
-newline will be printed unless you specify one.} In addition to the
-standard C escape sequences, a backslash followed by a space stands for a
-space.  This is useful for outputting a string with spaces at the
-beginning or the end, since leading and trailing spaces are otherwise
-trimmed from all arguments.  Thus, to print @samp{@ and foo =@ }, use the
-command @samp{echo \@ and foo = \@ }.
-@c FIXME: verify hard copy actually issues enspaces for '@ '!  Will this
-@c        confuse texinfo?
-
-A backslash at the end of @var{text} can be used, as in C, to continue
-the command onto subsequent lines.  For example,
-
-@example
-echo This is some text\n\
-which is continued\n\
-onto several lines.\n
-@end example
-
-produces the same output as
-
-@example
-echo This is some text\n
-echo which is continued\n
-echo onto several lines.\n
-@end example
-
-@item output @var{expression}
-@kindex output
-Print the value of @var{expression} and nothing but that value: no
-newlines, no @samp{$@var{nn} = }.  The value is not entered in the
-value history either.  @xref{Expressions} for more information on
-expressions. 
-
-@item output/@var{fmt} @var{expression}
-Print the value of @var{expression} in format @var{fmt}.  You can use
-the same formats as for @code{print}; @pxref{Output formats}, for more
-information.
-
-@item printf @var{string}, @var{expressions}@dots{}
-@kindex printf
-Print the values of the @var{expressions} under the control of
-@var{string}.  The @var{expressions} are separated by commas and may
-be either numbers or pointers.  Their values are printed as specified
-by @var{string}, exactly as if the program were to execute
-
-@example
-printf (@var{string}, @var{expressions}@dots{});
-@end example
-
-For example, you can print two values in hex like this:
-
-@example
-printf "foo, bar-foo = 0x%x, 0x%x\n", foo, bar-foo
-@end example
-
-The only backslash-escape sequences that you can use in the format
-string are the simple ones that consist of backslash followed by a
-letter.
-@end table
-
-@node Emacs, _GDBN__ Bugs, Sequences, Top
-@chapter Using _GDBN__ under GNU Emacs
-
-@cindex emacs
-A special interface allows you to use GNU Emacs to view (and
-edit) the source files for the program you are debugging with
-_GDBN__.
-
-To use this interface, use the command @kbd{M-x gdb} in Emacs.  Give the
-executable file you want to debug as an argument.  This command starts
-_GDBN__ as a subprocess of Emacs, with input and output through a newly
-created Emacs buffer.
-
-Using _GDBN__ under Emacs is just like using _GDBN__ normally except for two
-things:
-
-@itemize @bullet
-@item
-All ``terminal'' input and output goes through the Emacs buffer.  
-@end itemize
-
-This applies both to _GDBN__ commands and their output, and to the input
-and output done by the program you are debugging.
-
-This is useful because it means that you can copy the text of previous
-commands and input them again; you can even use parts of the output
-in this way.
-
-All the facilities of Emacs' Shell mode are available for interacting
-with your program.  In particular, you can send signals the usual
-way---for example, @kbd{C-c C-c} for an interrupt, @kbd{C-c C-z} for a
-stop.
-
-@itemize @bullet
-@item
-_GDBN__ displays source code through Emacs.  
-@end itemize
-
-Each time _GDBN__ displays a stack frame, Emacs automatically finds the
-source file for that frame and puts an arrow (_0__@samp{=>}_1__) at the
-left margin of the current line.  Emacs uses a separate buffer for
-source display, and splits the window to show both your _GDBN__ session
-and the source.
-
-Explicit _GDBN__ @code{list} or search commands still produce output as
-usual, but you probably will have no reason to use them.
-
-@quotation
-@emph{Warning:} If the directory where your program resides is not your
-current directory, it can be easy to confuse Emacs about the location of
-the source files, in which case the auxiliary display buffer will not
-appear to show your source.  _GDBN__ can find programs by searching your
-environment's @code{PATH} variable, so the _GDBN__ input and output
-session will proceed normally; but Emacs doesn't get enough information
-back from _GDBN__ to locate the source files in this situation.  To
-avoid this problem, either start _GDBN__ mode from the directory where
-your program resides, or specify a full path name when prompted for the
-@kbd{M-x gdb} argument.
-
-A similar confusion can result if you use the _GDBN__ @code{file} command to
-switch to debugging a program in some other location, from an existing
-_GDBN__ buffer in Emacs.
-@end quotation
-
-By default, @kbd{M-x gdb} calls the program called @file{gdb}.  If
-you need to call _GDBN__ by a different name (for example, if you keep
-several configurations around, with different names) you can set the
-Emacs variable @code{gdb-command-name}; for example,
-@example
-(setq gdb-command-name "mygdb")
-@end example
-@noindent
-(preceded by @kbd{ESC ESC}, or typed in the @code{*scratch*} buffer, or
-in your @file{.emacs} file) will make Emacs call the program named
-``@code{mygdb}'' instead.
-
-In the _GDBN__ I/O buffer, you can use these special Emacs commands in
-addition to the standard Shell mode commands:
-
-@table @kbd
-@item C-h m
-Describe the features of Emacs' _GDBN__ Mode.
-
-@item M-s
-Execute to another source line, like the _GDBN__ @code{step} command; also
-update the display window to show the current file and location.
-
-@item M-n
-Execute to next source line in this function, skipping all function
-calls, like the _GDBN__ @code{next} command.  Then update the display window
-to show the current file and location.
-
-@item M-i
-Execute one instruction, like the _GDBN__ @code{stepi} command; update
-display window accordingly.
-
-@item M-x gdb-nexti
-Execute to next instruction, using the _GDBN__ @code{nexti} command; update
-display window accordingly.
-
-@item C-c C-f
-Execute until exit from the selected stack frame, like the _GDBN__
-@code{finish} command.
-
-@item M-c
-Continue execution of the program, like the _GDBN__ @code{continue}
-command.  @emph{Warning:} In Emacs v19, this command is @kbd{C-c C-p}.
-
-@item M-u
-Go up the number of frames indicated by the numeric argument
-(@pxref{Arguments, , Numeric Arguments, emacs, The GNU Emacs Manual}),
-like the _GDBN__ @code{up} command.  @emph{Warning:} In Emacs v19, this
-command is @kbd{C-c C-u}.@refill
-
-@item M-d
-Go down the number of frames indicated by the numeric argument, like the
-_GDBN__ @code{down} command.  @emph{Warning:} In Emacs v19, this command
-is @kbd{C-c C-d}.
-
-@item C-x &
-Read the number where the cursor is positioned, and insert it at the end
-of the _GDBN__ I/O buffer.  For example, if you wish to disassemble code
-around an address that was displayed earlier, type @kbd{disassemble};
-then move the cursor to the address display, and pick up the
-argument for @code{disassemble} by typing @kbd{C-x &}.  
-
-You can customize this further on the fly by defining elements of the list
-@code{gdb-print-command}; once it is defined, you can format or
-otherwise process numbers picked up by @kbd{C-x &} before they are
-inserted.  A numeric argument to @kbd{C-x &} will both indicate that you
-wish special formatting, and act as an index to pick an element of the
-list.  If the list element is a string, the number to be inserted is
-formatted using the Emacs function @code{format}; otherwise the number
-is passed as an argument to the corresponding list element.
-
-@end table
-
-In any source file, the Emacs command @kbd{C-x SPC} (@code{gdb-break})
-tells _GDBN__ to set a breakpoint on the source line point is on.
-
-If you accidentally delete the source-display buffer, an easy way to get
-it back is to type the command @code{f} in the _GDBN__ buffer, to
-request a frame display; when you run under Emacs, this will recreate
-the source buffer if necessary to show you the context of the current
-frame.
-
-The source files displayed in Emacs are in ordinary Emacs buffers
-which are visiting the source files in the usual way.  You can edit
-the files with these buffers if you wish; but keep in mind that _GDBN__
-communicates with Emacs in terms of line numbers.  If you add or
-delete lines from the text, the line numbers that _GDBN__ knows will cease
-to correspond properly to the code.
-
-@c The following dropped because Epoch is nonstandard.  Reactivate
-@c if/when v19 does something similar. ---pesch@cygnus.com 19dec1990
-@ignore
-@kindex emacs epoch environment  
-@kindex epoch
-@kindex inspect
-
-Version 18 of Emacs has a built-in window system called the @code{epoch}
-environment.  Users of this environment can use a new command,
-@code{inspect} which performs identically to @code{print} except that
-each value is printed in its own window.
-@end ignore
-
-@node _GDBN__ Bugs, Renamed Commands, Emacs, Top
-@chapter Reporting Bugs in _GDBN__
-@cindex Bugs in _GDBN__
-@cindex Reporting Bugs in _GDBN__
-
-Your bug reports play an essential role in making _GDBN__ reliable.
-
-Reporting a bug may help you by bringing a solution to your problem, or it
-may not.  But in any case the principal function of a bug report is to help
-the entire community by making the next version of _GDBN__ work better.  Bug
-reports are your contribution to the maintenance of _GDBN__.
-
-In order for a bug report to serve its purpose, you must include the
-information that enables us to fix the bug.
-
-@menu
-* Bug Criteria::                Have You Found a Bug?
-* Bug Reporting::               How to Report Bugs
-@end menu
-
-@node Bug Criteria, Bug Reporting, _GDBN__ Bugs, _GDBN__ Bugs
-@section Have You Found a Bug?
-@cindex Bug Criteria
-
-If you are not sure whether you have found a bug, here are some guidelines:
-
-@itemize @bullet
-@item
-@cindex Fatal Signal
-@cindex Core Dump
-If the debugger gets a fatal signal, for any input whatever, that is a
-_GDBN__ bug.  Reliable debuggers never crash.
-
-@item
-@cindex error on Valid Input
-If _GDBN__ produces an error message for valid input, that is a bug.
-
-@item
-@cindex Invalid Input
-If _GDBN__ does not produce an error message for invalid input,
-that is a bug.  However, you should note that your idea of
-``invalid input'' might be our idea of ``an extension'' or ``support
-for traditional practice''.
-
-@item
-If you are an experienced user of debugging tools, your suggestions
-for improvement of _GDBN__ are welcome in any case.
-@end itemize
-
-@node Bug Reporting,  , Bug Criteria, _GDBN__ Bugs
-@section How to Report Bugs
-@cindex Bug Reports
-@cindex _GDBN__ Bugs, Reporting
-
-A number of companies and individuals offer support for GNU products.
-If you obtained _GDBN__ from a support organization, we recommend you
-contact that organization first. 
-
-Contact information for many support companies and individuals is
-available in the file @file{etc/SERVICE} in the GNU Emacs distribution.
-
-In any event, we also recommend that you send bug reports for _GDBN__ to one
-of these addresses:
-
-@example
-bug-gdb@@prep.ai.mit.edu
-@{ucbvax|mit-eddie|uunet@}!prep.ai.mit.edu!bug-gdb
-@end example
-
-@strong{Do not send bug reports to @samp{info-gdb}, or to
-@samp{help-gdb}, or to any newsgroups.} Most users of _GDBN__ do not want to
-receive bug reports.  Those that do, have arranged to receive @samp{bug-gdb}.
-
-The mailing list @samp{bug-gdb} has a newsgroup @samp{gnu.gdb.bug} which
-serves as a repeater.  The mailing list and the newsgroup carry exactly
-the same messages.  Often people think of posting bug reports to the
-newsgroup instead of mailing them.  This appears to work, but it has one
-problem which can be crucial: a newsgroup posting often lacks a mail
-path back to the sender.  Thus, if we need to ask for more information,
-we may be unable to reach you.  For this reason, it is better to send
-bug reports to the mailing list.
-
-As a last resort, send bug reports on paper to:
-
-@example
-GNU Debugger Bugs
-Free Software Foundation
-545 Tech Square
-Cambridge, MA 02139
-@end example
-
-The fundamental principle of reporting bugs usefully is this:
-@strong{report all the facts}.  If you are not sure whether to state a
-fact or leave it out, state it!
-
-Often people omit facts because they think they know what causes the
-problem and assume that some details don't matter.  Thus, you might
-assume that the name of the variable you use in an example does not matter.
-Well, probably it doesn't, but one cannot be sure.  Perhaps the bug is a
-stray memory reference which happens to fetch from the location where that
-name is stored in memory; perhaps, if the name were different, the contents
-of that location would fool the debugger into doing the right thing despite
-the bug.  Play it safe and give a specific, complete example.  That is the
-easiest thing for you to do, and the most helpful.
-
-Keep in mind that the purpose of a bug report is to enable us to fix
-the bug if it is new to us.  It isn't as important what happens if
-the bug is already known.  Therefore, always write your bug reports on
-the assumption that the bug has not been reported previously.
-
-Sometimes people give a few sketchy facts and ask, ``Does this ring a
-bell?''  Those bug reports are useless, and we urge everyone to
-@emph{refuse to respond to them} except to chide the sender to report
-bugs properly.
-
-To enable us to fix the bug, you should include all these things:
-
-@itemize @bullet
-@item
-The version of _GDBN__.  _GDBN__ announces it if you start with no
-arguments; you can also print it at any time using @code{show version}.
-
-Without this, we won't know whether there is any point in looking for
-the bug in the current version of _GDBN__.
-
-@item
-A complete input script, and all necessary source files, that will
-reproduce the bug.  
-
-@item
-What compiler (and its version) was used to compile _GDBN__---e.g.
-``_GCC__-1.37.1''.
-
-@item
-The command arguments you gave the compiler to compile your example and
-observe the bug.  For example, did you use @samp{-O}?  To guarantee
-you won't omit something important, list them all.
-
-If we were to try to guess the arguments, we would probably guess wrong
-and then we might not encounter the bug.
-
-@item
-The type of machine you are using, and the operating system name and
-version number.
-
-@item
-A description of what behavior you observe that you believe is
-incorrect.  For example, ``It gets a fatal signal.''
-
-Of course, if the bug is that _GDBN__ gets a fatal signal, then we will
-certainly notice it.  But if the bug is incorrect output, we might not
-notice unless it is glaringly wrong.  We are human, after all.  You
-might as well not give us a chance to make a mistake.
-
-Even if the problem you experience is a fatal signal, you should still
-say so explicitly.  Suppose something strange is going on, such as,
-your copy of _GDBN__ is out of synch, or you have encountered a
-bug in the C library on your system.  (This has happened!)  Your copy
-might crash and ours would not.  If you told us to expect a crash,
-then when ours fails to crash, we would know that the bug was not
-happening for us.  If you had not told us to expect a crash, then we
-would not be able to draw any conclusion from our observations.
-
-@item
-If you wish to suggest changes to the _GDBN__ source, send us context
-diffs.  If you even discuss something in the _GDBN__ source, refer to
-it by context, not by line number.
-
-The line numbers in our development sources won't match those in your
-sources.  Your line numbers would convey no useful information to us.
-
-@end itemize
-
-Here are some things that are not necessary:
-
-@itemize @bullet
-@item
-A description of the envelope of the bug.
-
-Often people who encounter a bug spend a lot of time investigating
-which changes to the input file will make the bug go away and which
-changes will not affect it.
-
-This is often time consuming and not very useful, because the way we
-will find the bug is by running a single example under the debugger
-with breakpoints, not by pure deduction from a series of examples.
-We recommend that you save your time for something else.
-
-Of course, if you can find a simpler example to report @emph{instead}
-of the original one, that is a convenience for us.  Errors in the
-output will be easier to spot, running under the debugger will take
-less time, etc. 
-
-However, simplification is not vital; if you don't want to do this,
-report the bug anyway and send us the entire test case you used.
-
-@item
-A patch for the bug.
-
-A patch for the bug does help us if it is a good one.  But don't omit
-the necessary information, such as the test case, on the assumption that
-a patch is all we need.  We might see problems with your patch and decide
-to fix the problem another way, or we might not understand it at all.
-
-Sometimes with a program as complicated as _GDBN__ it is very hard to
-construct an example that will make the program follow a certain path
-through the code.  If you don't send us the example, we won't be able
-to construct one, so we won't be able to verify that the bug is fixed.
-
-And if we can't understand what bug you are trying to fix, or why your
-patch should be an improvement, we won't install it.  A test case will
-help us to understand.
-
-@item
-A guess about what the bug is or what it depends on.
-
-Such guesses are usually wrong.  Even we can't guess right about such
-things without first using the debugger to find the facts.
-@end itemize
-
-@iftex
-@include rdl-apps.texi
-@end iftex
-
-@node Renamed Commands, Installing _GDBN__, _GDBN__ Bugs, Top
-@appendix Renamed Commands
-
-The following commands were renamed in _GDBN__ 4.0, in order to make the
-command set as a whole more consistent and easier to use and remember:
-
-@kindex add-syms                   
-@kindex delete environment         
-@kindex info copying               
-@kindex info convenience           
-@kindex info directories           
-@kindex info editing               
-@kindex info history               
-@kindex info targets               
-@kindex info values                
-@kindex info version               
-@kindex info warranty              
-@kindex set addressprint      
-@kindex set arrayprint        
-@kindex set prettyprint       
-@kindex set screen-height     
-@kindex set screen-width      
-@kindex set unionprint        
-@kindex set vtblprint         
-@kindex set demangle          
-@kindex set asm-demangle      
-@kindex set sevenbit-strings  
-@kindex set array-max         
-@kindex set caution           
-@kindex set history write     
-@kindex show addressprint      
-@kindex show arrayprint        
-@kindex show prettyprint       
-@kindex show screen-height     
-@kindex show screen-width      
-@kindex show unionprint        
-@kindex show vtblprint         
-@kindex show demangle          
-@kindex show asm-demangle      
-@kindex show sevenbit-strings  
-@kindex show array-max         
-@kindex show caution           
-@kindex show history write     
-@kindex unset                      
-
-@ifinfo
-@example
-OLD COMMAND               NEW COMMAND
----------------           -------------------------------
-add-syms                  add-symbol-file
-delete environment        unset environment
-info convenience          show convenience
-info copying              show copying
-info directories          show directories     
-info editing              show commands
-info history              show values
-info targets              help target
-info values               show values
-info version              show version
-info warranty             show warranty
-set/show addressprint     set/show print address
-set/show array-max        set/show print elements
-set/show arrayprint       set/show print array
-set/show asm-demangle     set/show print asm-demangle
-set/show caution          set/show confirm
-set/show demangle         set/show print demangle
-set/show history write    set/show history save
-set/show prettyprint      set/show print pretty
-set/show screen-height    set/show height
-set/show screen-width     set/show width
-set/show sevenbit-strings set/show print sevenbit-strings
-set/show unionprint       set/show print union
-set/show vtblprint        set/show print vtbl
-
-unset                     [No longer an alias for delete]
-@end example
-@end ifinfo
-
-@tex
-\vskip \parskip\vskip \baselineskip
-\halign{\tt #\hfil &\qquad#&\tt #\hfil\cr
-{\bf Old Command}         &&{\bf New Command}\cr
-add-syms                  &&add-symbol-file\cr
-delete environment        &&unset environment\cr
-info convenience          &&show convenience\cr
-info copying              &&show copying\cr
-info directories          &&show directories     \cr
-info editing              &&show commands\cr
-info history              &&show values\cr
-info targets              &&help target\cr
-info values               &&show values\cr
-info version              &&show version\cr
-info warranty             &&show warranty\cr
-set{\rm / }show addressprint     &&set{\rm / }show print address\cr
-set{\rm / }show array-max        &&set{\rm / }show print elements\cr
-set{\rm / }show arrayprint       &&set{\rm / }show print array\cr
-set{\rm / }show asm-demangle     &&set{\rm / }show print asm-demangle\cr
-set{\rm / }show caution          &&set{\rm / }show confirm\cr
-set{\rm / }show demangle         &&set{\rm / }show print demangle\cr
-set{\rm / }show history write    &&set{\rm / }show history save\cr
-set{\rm / }show prettyprint      &&set{\rm / }show print pretty\cr
-set{\rm / }show screen-height    &&set{\rm / }show height\cr
-set{\rm / }show screen-width     &&set{\rm / }show width\cr
-set{\rm / }show sevenbit-strings &&set{\rm / }show print sevenbit-strings\cr
-set{\rm / }show unionprint       &&set{\rm / }show print union\cr
-set{\rm / }show vtblprint        &&set{\rm / }show print vtbl\cr
-\cr
-unset                     &&\rm(No longer an alias for delete)\cr
-}
-@end tex
-
-@node Installing _GDBN__, Copying, Renamed Commands, Top
-@appendix Installing _GDBN__
-@cindex configuring _GDBN__
-@cindex installation
-
-_GDBN__ comes with a @code{configure} script that automates the process
-of preparing _GDBN__ for installation; you can then use @code{make} to
-build the @code{_GDBP__} program.
-
-The _GDBP__ distribution includes all the source code you need for
-_GDBP__ in a single directory @file{gdb-_GDB_VN__}.  That directory in turn
-contains: 
-
-@table @code
-@item gdb-_GDB_VN__/configure
-Overall script for configuring _GDBN__ and all its supporting libraries.
-
-@item gdb-_GDB_VN__/gdb
-the source specific to _GDBN__ itself
-
-@item gdb-_GDB_VN__/bfd
-source for the Binary File Descriptor Library
-
-@item gdb-_GDB_VN__/include
-GNU include files
-
-@item gdb-_GDB_VN__/libiberty
-source for the @samp{-liberty} free software library
-
-@item gdb-_GDB_VN__/readline
-source for the GNU command-line interface
-@end table
-@noindent
-Each of these directories has its own @code{configure} script, which are
-used by the overall @code{configure} script in @file{gdb-_GDB_VN__}.
-
-It is most convenient to run @code{configure} from the @file{gdb-_GDB_VN__}
-directory.  The simplest way to configure and build _GDBN__ is the
-following:
-@example
-cd gdb-_GDB_VN__
-./configure @var{host}
-make
-@end example
-@noindent
-where @var{host} is something like @samp{sun4} or @samp{decstation}, that
-identifies the platform where _GDBN__ will run.  This builds the three
-libraries @file{bfd}, @file{readline}, and @file{libiberty}, then
-@code{gdb} itself.  The configured source files, and the binaries, are
-left in the corresponding source directories.
-
-You can install @code{_GDBP__} anywhere; it has no hardwired paths.  However,
-you should make sure that the shell on your path (named by the
-@samp{SHELL} environment variable) is publicly readable; some systems
-refuse to let _GDBN__ debug child processes whose programs are not
-readable, and _GDBN__ uses the shell to start your program.
-
-@menu
-* Subdirectories::              Configuration subdirectories
-* Config Names::                Specifying names for hosts and targets
-* configure Options::           Summary of options for configure
-* Formatting Documentation::    How to format and print _GDBN__ documentation
-@end menu
-
-
-@node Subdirectories, Config Names, Installing _GDBN__, Installing _GDBN__
-@section Configuration Subdirectories
-If you want to run _GDBN__ versions for several host or target machines,
-you'll need a different _GDBP__ compiled for each combination of host
-and target.  @code{configure} is designed to make this easy by allowing
-you to generate each configuration in a separate subdirectory.  If your
-@code{make} program handles the @samp{VPATH} feature (GNU @code{make}
-does), running @code{make} in each of these directories then builds the
-_GDBP__ program specified there.
-
-@code{configure} creates these subdirectories for you when you
-simultaneously specify several configurations; but it's a good habit
-even for a single configuration.  You can specify the use of
-subdirectories using the @samp{+subdirs} option (abbreviated
-@samp{+sub}).  For example, you can build _GDBN__ on a Sun 4 as follows:
-
-@example
-@group
-cd gdb-_GDB_VN__
-./configure +sub sun4
-cd Host-sparc-sun-sunos4/Target-sparc-sun-sunos4
-make
-@end group
-@end example
-
-When @code{configure} uses subdirectories to build programs or
-libraries, it creates nested directories
-@file{Host-@var{host}/Target-@var{target}}.  (As you see in the example,
-the names used for @var{host} and @var{target} may be expanded from your
-@code{configure} argument; @pxref{Config Names}). @code{configure} uses
-these two directory levels because _GDBN__ can be configured for
-cross-compiling: _GDBN__ can run on one machine (the host) while
-debugging programs that run on another machine (the target).  You
-specify cross-debugging targets by giving the
-@samp{+target=@var{target}} option to @code{configure}.  Specifying only
-hosts still gives you two levels of subdirectory for each host, with the
-same configuration suffix on both; that is, if you give any number of
-hosts but no targets, _GDBN__ will be configured for native debugging on
-each host.  On the other hand, whenever you specify both hosts and
-targets on the same command line, @code{configure} creates all
-combinations of the hosts and targets you list.@refill
-
-When you run @code{make} to build a program or library, you must run it
-in a configured directory.  If you made a single configuration,
-without subdirectories, run @code{make} in the source directory.
-If you have @file{Host-@var{host}/Target-@var{target}} subdirectories,
-run @code{make} in those subdirectories.  
-
-Each @code{configure} and @code{Makefile} under each source directory
-runs recursively, so that typing @code{make} in @file{gdb-_GDB_VN__} (or in a
-@file{gdb-_GDB_VN__/Host-@var{host}/Target-@var{target}} subdirectory)
-builds all the required libraries, then _GDBN__.@refill
-
-If you run @code{configure} from a directory (such as @file{gdb-_GDB_VN__}) that
-contains source directories for multiple libraries or programs,
-@code{configure} creates the @file{Host-@var{host}/Target-@var{target}}
-subdirectories in each library or program's source directory.  For
-example, typing:
-@example
-cd gdb-_GDB_VN__
-configure sun4 +target=vxworks960
-@end example
-@noindent
-creates the following directories:
-@smallexample
-gdb-_GDB_VN__/Host-sparc-sun-sunos4/Target-i960-wrs-vxworks
-gdb-_GDB_VN__/bfd/Host-sparc-sun-sunos4/Target-i960-wrs-vxworks
-gdb-_GDB_VN__/gdb/Host-sparc-sun-sunos4/Target-i960-wrs-vxworks
-gdb-_GDB_VN__/libiberty/Host-sparc-sun-sunos4/Target-i960-wrs-vxworks
-gdb-_GDB_VN__/readline/Host-sparc-sun-sunos4/Target-i960-wrs-vxworks
-@end smallexample
-@noindent
-The @code{Makefile} in
-@smallexample
-gdb-_GDB_VN__/Host-sparc-sun-sunos4/Target-i960-wrs-vxworks
-@end smallexample
-@noindent
-will @code{cd} to the appropriate lower-level directories, for example:
-@smallexample
-gdb-_GDB_VN__/bfd/Host-sparc-sun-sunos4/Target-i960-wrs-vxworks
-@end smallexample
-@noindent
-building each in turn.
-
-When you have multiple hosts or targets configured, you can run
-@code{make} on them in parallel (for example, if they are NFS-mounted on
-each of the hosts); they will not interfere with each other.
-
-
-@iftex
-@c FIXME isn't there something kinder, gentler than @page?
-@page
-@end iftex
-@node Config Names, configure Options, Subdirectories, Installing _GDBN__
-@section Specifying Names for Hosts and Targets
-
-The specifications used for hosts and targets in the @code{configure}
-script are based on a three-part naming scheme, but some short predefined
-aliases are also supported.  The full naming scheme encodes three pieces
-of information in the following pattern: 
-@example
-@var{architecture}-@var{vendor}-@var{os}
-@end example
-
-For example, you can use the alias @code{sun4} as a @var{host} argument
-or in a @code{+target=@var{target}} option, but the full name of that
-configuration specifies that the architecture is @samp{sparc}, the
-vendor is @samp{sun}, and the operating system is @samp{sunos4}.
-
-@iftex
-@c I know this is ugly, but @group is useless except in examples now...
-@c (using texinfo 2.52 or so)
-@page
-@end iftex
-
-The following table shows all the architectures, hosts, and OS prefixes
-that @code{configure} recognizes in _GDBN__ _GDB_VN__.  Entries in the ``OS
-prefix'' column ending in a @samp{*} may be followed by a release number.
-
-@ifinfo
-@example
-
-ARCHITECTURE  VENDOR        OS prefix
-------------+-------------+-------------
-            |             |
- 580        | altos       | aix*
- a29k       | amdahl      | amigados
- alliant    | aout        | aout    
- arm        | apollo      | bout    
- c1         | att         | bsd*    
- c2         | bull        | coff    
- cray2      | bcs         | ctix*   
- h8300      | bout        | dynix*  
- i386       | cbm         | esix*   
- i860       | coff        | hpux*   
- i960       | convergent  | irix*   
- m68000     | convex      | isc*    
- m68k       | cray        | kern    
- m88k       | dec         | mach*   
- mips       | encore      | newsos* 
- ns32k      | gould       | nindy*  
- pyramid    | hp          | none    
- romp       | ibm         | osf*    
- rs6000     | intel       | sco*    
- rtpc       | isi         | sunos*  
- sparc      | little      | svr4    
- tahoe      | mips        | sym*    
- tron       | motorola    | sysv*   
- vax        | ncr         | ultrix* 
- xmp        | next        | unicos  
- ymp        | none        | unos*   
-            | nyu         | uts     
-            | sco         | v88r*   
-            | sequent     | vms*    
-            | sgi         | vxworks*
-            | sony        |
-            | sun         |
-            | unicom      |
-            | utek        |
-            | wrs         |
-
-@end example
-@quotation
-@emph{Warning:} Many combinations of architecture, vendor, and OS are
-untested. 
-@end quotation
-@end ifinfo
-@c FIXME: this table is probably screwed in @smallbook.  Try setting
-@c FIXME...smallbook fonts?
-@tex
-%\vskip\parskip
-\vskip \baselineskip
-\halign{\hskip\parindent\tt #\hfil &\qquad#&\tt #\hfil &\qquad#&\tt
-#\hfil &\qquad\qquad\it #\hfil\cr
-{\bf Architecture} &&{\bf Vendor} &&{\bf OS prefix}\cr
-\multispan5\hrulefill\cr
- 580        && altos       && aix*    \cr
- a29k       && amdahl      && amigados\cr
- alliant    && aout        && aout    \cr
- arm        && apollo      && bout    \cr
- c1         && att         && bsd*    \cr
- c2         && bull        && coff    \cr
- cray2      && bcs         && ctix*   \cr
- h8300      && bout        && dynix*  \cr
- i386       && cbm         && esix*   \cr
- i860       && coff        && hpux*   &Warning:                   \cr
- i960       && convergent  && irix*   &Many combinations          \cr
- m68000     && convex      && isc*    &of architecture, vendor    \cr
- m68k       && cray        && kern    &and OS are untested.       \cr
- m88k       && dec         && mach*   \cr
- mips       && encore      && newsos* \cr
- ns32k      && gould       && nindy*  \cr
- pyramid    && hp          && none    \cr
- romp       && ibm         && osf*    \cr
- rs6000     && intel       && sco*    \cr
- rtpc       && isi         && sunos*  \cr
- sparc      && little      && svr4    \cr
- tahoe      && mips        && sym*    \cr
- tron       && motorola    && sysv*   \cr
- vax        && ncr         && ultrix* \cr
- xmp        && next        && unicos  \cr
- ymp        && none        && unos*   \cr
-            && nyu         && uts     \cr
-            && sco         && v88r*   \cr
-            && sequent     && vms*    \cr
-            && sgi         && vxworks*\cr
-            && sony        &&\cr
-            && sun         &&\cr
-            && unicom      &&\cr
-            && utek        &&\cr
-            && wrs         &&\cr
-}
-@end tex
-
-The @code{configure} script accompanying _GDBN__ _GDB_VN__ does not provide
-any query facility to list all supported host and target names or
-aliases.  @code{configure} calls the Bourne shell script
-@code{config.sub} to map abbreviations to full names; you can read the
-script, if you wish, or you can use it to test your guesses on
-abbreviations---for example:
-@example
-% sh config.sub sun4
-sparc-sun-sunos4
-% sh config.sub sun3
-m68k-sun-sunos4
-% sh config.sub decstation
-mips-dec-ultrix
-% sh config.sub hp300bsd
-m68k-hp-bsd
-% sh config.sub i386v
-i386-none-sysv
-% sh config.sub i486v
-*** No vendor: configuration `i486v' not recognized
-@end example
-
-@node configure Options, Formatting Documentation, Config Names, Installing _GDBN__
-@section @code{configure} Options
-
-Here is a summary of all the @code{configure} options and arguments that
-you might use for building _GDBN__:
-
-@example
-configure @r{[}+destdir=@var{dir}@r{]} @r{[}+subdirs@r{]} @r{[}+norecur@r{]} @r{[}+rm@r{]}
-          @r{[}+target=@var{target}@dots{}@r{]} @var{host}@dots{}
-@end example
-@noindent
-You may introduce options with the character @samp{-} rather than
-@samp{+} if you prefer; but you may abbreviate option names if you use
-@samp{+}.
-
-@table @code
-@item +destdir=@var{dir}
-@var{dir} is an installation directory @emph{path prefix}.  After you
-configure with this option, @code{make install} will install _GDBN__ as
-@file{@var{dir}/bin/_GDBP__}, and the libraries in @file{@var{dir}/lib}.
-If you specify @samp{+destdir=/usr/local}, for example, @code{make
-install} creates @file{/usr/local/bin/gdb}.@refill
-
-@item +subdirs
-Write configuration specific files in subdirectories of the form
-@example
-Host-@var{host}/Target-@var{target}
-@end example
-@noindent
-(and configure the @code{Makefile} to write binaries there too).
-Without this option, if you specify only one configuration for _GDBN__,
-@code{configure} will use the same directory for source, configured
-files, and binaries.  This option is used automatically if you specify
-more than one @var{host} or more than one @samp{+target=@var{target}}
-option on the @code{configure} command line.
-
-@item +norecur
-Configure only the directory where @code{configure} is executed; do not
-propagate configuration to subdirectories.
-
-@item +rm
-Remove the configuration that the other arguments specify.
-
-@c This doesn't work (yet if ever).  FIXME.
-@c @item +parse=@var{lang} @dots{}
-@c Configure the _GDBN__ expression parser to parse the listed languages.
-@c @samp{all} configures _GDBN__ for all supported languages.  To get a
-@c list of all supported languages, omit the argument.  Without this
-@c option, _GDBN__ is configured to parse all supported languages.
-
-@item +target=@var{target} @dots{}
-Configure _GDBN__ for cross-debugging programs running on each specified
-@var{target}.  You may specify as many @samp{+target} options as you
-wish.  Without this option, _GDBN__ is configured to debug programs that
-run on the same machine (@var{host}) as _GDBN__ itself.
-
-There is no convenient way to generate a list of all available targets.
-
-@item @var{host} @dots{}
-Configure _GDBN__ to run on each specified @var{host}.  You may specify as
-many host names as you wish.  
-
-There is no convenient way to generate a list of all available hosts.
-@end table
-
-@noindent
-@code{configure} accepts other options, for compatibility with
-configuring other GNU tools recursively; but these are the only
-options that affect _GDBN__ or its supporting libraries.
-
-@node Formatting Documentation,  , configure Options, Installing _GDBN__
-@section Formatting the Documentation
-
-@cindex _GDBN__ reference card
-@cindex reference card
-The _GDBN__ _GDB_VN__ release includes an already-formatted reference card,
-ready for printing on a PostScript printer, as @file{gdb-_GDB_VN__/gdb/refcard.ps}.
-It uses the most common PostScript fonts: the Times family, Courier, and
-Symbol.  If you have a PostScript printer, you can print the reference
-card by just sending @file{refcard.ps} to the printer.
-
-The release also includes the online Info version of this manual already
-formatted: the main Info file is @file{gdb-_GDB_VN__/gdb/gdb.info}, and it
-refers to subordinate files matching @samp{gdb.info*} in the same
-directory.
-
-If you want to make these Info files yourself from the _GDBN__ manual's
-source, you need the GNU @code{makeinfo} program.  Once you have it, you
-can type
-@example
-cd gdb-_GDB_VN__/gdb
-make gdb.info
-@end example
-@noindent
-to make the Info file.
-
-If you want to format and print copies of the manual, you need several
-things: 
-@itemize @bullet
-@item 
-@TeX{}, the public domain typesetting program written by Donald Knuth,
-must be installed on your system and available through your execution
-path.
-@item 
-@file{gdb-_GDB_VN__/texinfo}: @TeX{} macros defining the GNU
-Documentation Format.
-@item
-@emph{A @sc{dvi} output program.}  @TeX{} doesn't actually make marks on
-paper; it produces output files called @sc{dvi} files.  If your system
-has @TeX{} installed, chances are it has a program for printing out
-these files; one popular example is @code{dvips}, which can print
-@sc{dvi} files on PostScript printers.
-@end itemize
-@noindent
-Once you have these things, you can type
-@example
-cd gdb-_GDB_VN__/gdb
-make gdb.dvi
-@end example
-@noindent
-to format the text of this manual, and print it with the usual output
-method for @TeX{} @sc{dvi} files at your site.
-
-If you want to print the reference card, but don't have a PostScript
-printer, or you want to use Computer Modern fonts instead, 
-you can still print it if you have @TeX{}.  Format the reference card by typing
-@example
-cd gdb-_GDB_VN__/gdb
-make refcard.dvi
-@end example
-@noindent
-
-The _GDBN__ reference card is designed to print in landscape mode on US
-``letter'' size paper; that is, on a sheet 11 inches wide by 8.5 inches
-high.  You will need to specify this form of printing as an option to
-your @sc{dvi} output program.
-
-
-@node Copying, Index, Installing _GDBN__, Top
-@unnumbered GNU GENERAL PUBLIC LICENSE
-@center Version 2, June 1991
-
-@display
-Copyright @copyright{} 1989, 1991 Free Software Foundation, Inc.
-675 Mass Ave, Cambridge, MA 02139, USA
-
-Everyone is permitted to copy and distribute verbatim copies
-of this license document, but changing it is not allowed.
-@end display
-
-@unnumberedsec Preamble
-
-  The licenses for most software are designed to take away your
-freedom to share and change it.  By contrast, the GNU General Public
-License is intended to guarantee your freedom to share and change free
-software---to make sure the software is free for all its users.  This
-General Public License applies to most of the Free Software
-Foundation's software and to any other program whose authors commit to
-using it.  (Some other Free Software Foundation software is covered by
-the GNU Library General Public License instead.)  You can apply it to
-your programs, too.
-
-  When we speak of free software, we are referring to freedom, not
-price.  Our General Public Licenses are designed to make sure that you
-have the freedom to distribute copies of free software (and charge for
-this service if you wish), that you receive source code or can get it
-if you want it, that you can change the software or use pieces of it
-in new free programs; and that you know you can do these things.
-
-  To protect your rights, we need to make restrictions that forbid
-anyone to deny you these rights or to ask you to surrender the rights.
-These restrictions translate to certain responsibilities for you if you
-distribute copies of the software, or if you modify it.
-
-  For example, if you distribute copies of such a program, whether
-gratis or for a fee, you must give the recipients all the rights that
-you have.  You must make sure that they, too, receive or can get the
-source code.  And you must show them these terms so they know their
-rights.
-
-  We protect your rights with two steps: (1) copyright the software, and
-(2) offer you this license which gives you legal permission to copy,
-distribute and/or modify the software.
-
-  Also, for each author's protection and ours, we want to make certain
-that everyone understands that there is no warranty for this free
-software.  If the software is modified by someone else and passed on, we
-want its recipients to know that what they have is not the original, so
-that any problems introduced by others will not reflect on the original
-authors' reputations.
-
-  Finally, any free program is threatened constantly by software
-patents.  We wish to avoid the danger that redistributors of a free
-program will individually obtain patent licenses, in effect making the
-program proprietary.  To prevent this, we have made it clear that any
-patent must be licensed for everyone's free use or not licensed at all.
-
-  The precise terms and conditions for copying, distribution and
-modification follow.
-
-@iftex
-@unnumberedsec TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
-@end iftex
-@ifinfo
-@center TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
-@end ifinfo
-
-@enumerate
-@item
-This License applies to any program or other work which contains
-a notice placed by the copyright holder saying it may be distributed
-under the terms of this General Public License.  The ``Program'', below,
-refers to any such program or work, and a ``work based on the Program''
-means either the Program or any derivative work under copyright law:
-that is to say, a work containing the Program or a portion of it,
-either verbatim or with modifications and/or translated into another
-language.  (Hereinafter, translation is included without limitation in
-the term ``modification''.)  Each licensee is addressed as ``you''.
-
-Activities other than copying, distribution and modification are not
-covered by this License; they are outside its scope.  The act of
-running the Program is not restricted, and the output from the Program
-is covered only if its contents constitute a work based on the
-Program (independent of having been made by running the Program).
-Whether that is true depends on what the Program does.
-
-@item
-You may copy and distribute verbatim copies of the Program's
-source code as you receive it, in any medium, provided that you
-conspicuously and appropriately publish on each copy an appropriate
-copyright notice and disclaimer of warranty; keep intact all the
-notices that refer to this License and to the absence of any warranty;
-and give any other recipients of the Program a copy of this License
-along with the Program.
-
-You may charge a fee for the physical act of transferring a copy, and
-you may at your option offer warranty protection in exchange for a fee.
-
-@item
-You may modify your copy or copies of the Program or any portion
-of it, thus forming a work based on the Program, and copy and
-distribute such modifications or work under the terms of Section 1
-above, provided that you also meet all of these conditions:
-
-@alphaenumerate
-@item
-You must cause the modified files to carry prominent notices
-stating that you changed the files and the date of any change.
-
-@item
-You must cause any work that you distribute or publish, that in
-whole or in part contains or is derived from the Program or any
-part thereof, to be licensed as a whole at no charge to all third
-parties under the terms of this License.
-
-@item
-If the modified program normally reads commands interactively
-when run, you must cause it, when started running for such
-interactive use in the most ordinary way, to print or display an
-announcement including an appropriate copyright notice and a
-notice that there is no warranty (or else, saying that you provide
-a warranty) and that users may redistribute the program under
-these conditions, and telling the user how to view a copy of this
-License.  (Exception: if the Program itself is interactive but
-does not normally print such an announcement, your work based on
-the Program is not required to print an announcement.)
-@end alphaenumerate
-
-These requirements apply to the modified work as a whole.  If
-identifiable sections of that work are not derived from the Program,
-and can be reasonably considered independent and separate works in
-themselves, then this License, and its terms, do not apply to those
-sections when you distribute them as separate works.  But when you
-distribute the same sections as part of a whole which is a work based
-on the Program, the distribution of the whole must be on the terms of
-this License, whose permissions for other licensees extend to the
-entire whole, and thus to each and every part regardless of who wrote it.
-
-Thus, it is not the intent of this section to claim rights or contest
-your rights to work written entirely by you; rather, the intent is to
-exercise the right to control the distribution of derivative or
-collective works based on the Program.
-
-In addition, mere aggregation of another work not based on the Program
-with the Program (or with a work based on the Program) on a volume of
-a storage or distribution medium does not bring the other work under
-the scope of this License.
-
-@item
-You may copy and distribute the Program (or a work based on it,
-under Section 2) in object code or executable form under the terms of
-Sections 1 and 2 above provided that you also do one of the following:
-
-@alphaenumerate
-@item
-Accompany it with the complete corresponding machine-readable
-source code, which must be distributed under the terms of Sections
-1 and 2 above on a medium customarily used for software interchange; or,
-
-@item
-Accompany it with a written offer, valid for at least three
-years, to give any third party, for a charge no more than your
-cost of physically performing source distribution, a complete
-machine-readable copy of the corresponding source code, to be
-distributed under the terms of Sections 1 and 2 above on a medium
-customarily used for software interchange; or,
-
-@item
-Accompany it with the information you received as to the offer
-to distribute corresponding source code.  (This alternative is
-allowed only for noncommercial distribution and only if you
-received the program in object code or executable form with such
-an offer, in accord with Subsection b above.)
-@end alphaenumerate
-
-The source code for a work means the preferred form of the work for
-making modifications to it.  For an executable work, complete source
-code means all the source code for all modules it contains, plus any
-associated interface definition files, plus the scripts used to
-control compilation and installation of the executable.  However, as a
-special exception, the source code distributed need not include
-anything that is normally distributed (in either source or binary
-form) with the major components (compiler, kernel, and so on) of the
-operating system on which the executable runs, unless that component
-itself accompanies the executable.
-
-If distribution of executable or object code is made by offering
-access to copy from a designated place, then offering equivalent
-access to copy the source code from the same place counts as
-distribution of the source code, even though third parties are not
-compelled to copy the source along with the object code.
-
-@item
-You may not copy, modify, sublicense, or distribute the Program
-except as expressly provided under this License.  Any attempt
-otherwise to copy, modify, sublicense or distribute the Program is
-void, and will automatically terminate your rights under this License.
-However, parties who have received copies, or rights, from you under
-this License will not have their licenses terminated so long as such
-parties remain in full compliance.
-
-@item
-You are not required to accept this License, since you have not
-signed it.  However, nothing else grants you permission to modify or
-distribute the Program or its derivative works.  These actions are
-prohibited by law if you do not accept this License.  Therefore, by
-modifying or distributing the Program (or any work based on the
-Program), you indicate your acceptance of this License to do so, and
-all its terms and conditions for copying, distributing or modifying
-the Program or works based on it.
-
-@item
-Each time you redistribute the Program (or any work based on the
-Program), the recipient automatically receives a license from the
-original licensor to copy, distribute or modify the Program subject to
-these terms and conditions.  You may not impose any further
-restrictions on the recipients' exercise of the rights granted herein.
-You are not responsible for enforcing compliance by third parties to
-this License.
-
-@item
-If, as a consequence of a court judgment or allegation of patent
-infringement or for any other reason (not limited to patent issues),
-conditions are imposed on you (whether by court order, agreement or
-otherwise) that contradict the conditions of this License, they do not
-excuse you from the conditions of this License.  If you cannot
-distribute so as to satisfy simultaneously your obligations under this
-License and any other pertinent obligations, then as a consequence you
-may not distribute the Program at all.  For example, if a patent
-license would not permit royalty-free redistribution of the Program by
-all those who receive copies directly or indirectly through you, then
-the only way you could satisfy both it and this License would be to
-refrain entirely from distribution of the Program.
-
-If any portion of this section is held invalid or unenforceable under
-any particular circumstance, the balance of the section is intended to
-apply and the section as a whole is intended to apply in other
-circumstances.
-
-It is not the purpose of this section to induce you to infringe any
-patents or other property right claims or to contest validity of any
-such claims; this section has the sole purpose of protecting the
-integrity of the free software distribution system, which is
-implemented by public license practices.  Many people have made
-generous contributions to the wide range of software distributed
-through that system in reliance on consistent application of that
-system; it is up to the author/donor to decide if he or she is willing
-to distribute software through any other system and a licensee cannot
-impose that choice.
-
-This section is intended to make thoroughly clear what is believed to
-be a consequence of the rest of this License.
-
-@item
-If the distribution and/or use of the Program is restricted in
-certain countries either by patents or by copyrighted interfaces, the
-original copyright holder who places the Program under this License
-may add an explicit geographical distribution limitation excluding
-those countries, so that distribution is permitted only in or among
-countries not thus excluded.  In such case, this License incorporates
-the limitation as if written in the body of this License.
-
-@item
-The Free Software Foundation may publish revised and/or new versions
-of the General Public License from time to time.  Such new versions will
-be similar in spirit to the present version, but may differ in detail to
-address new problems or concerns.
-
-Each version is given a distinguishing version number.  If the Program
-specifies a version number of this License which applies to it and ``any
-later version'', you have the option of following the terms and conditions
-either of that version or of any later version published by the Free
-Software Foundation.  If the Program does not specify a version number of
-this License, you may choose any version ever published by the Free Software
-Foundation.
-
-@item
-If you wish to incorporate parts of the Program into other free
-programs whose distribution conditions are different, write to the author
-to ask for permission.  For software which is copyrighted by the Free
-Software Foundation, write to the Free Software Foundation; we sometimes
-make exceptions for this.  Our decision will be guided by the two goals
-of preserving the free status of all derivatives of our free software and
-of promoting the sharing and reuse of software generally.
-
-@iftex
-@heading NO WARRANTY
-@end iftex
-@ifinfo
-@center NO WARRANTY
-@end ifinfo
-
-@item
-BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
-FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  EXCEPT WHEN
-OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
-PROVIDE THE PROGRAM ``AS IS'' WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
-OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE RISK AS
-TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE
-PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
-REPAIR OR CORRECTION.
-
-@item
-IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
-WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
-REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
-INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
-OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
-TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
-YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
-PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
-POSSIBILITY OF SUCH DAMAGES.
-@end enumerate
-
-@iftex
-@heading END OF TERMS AND CONDITIONS
-@end iftex
-@ifinfo
-@center END OF TERMS AND CONDITIONS
-@end ifinfo
-
-@page
-@unnumberedsec Applying These Terms to Your New Programs
-
-  If you develop a new program, and you want it to be of the greatest
-possible use to the public, the best way to achieve this is to make it
-free software which everyone can redistribute and change under these terms.
-
-  To do so, attach the following notices to the program.  It is safest
-to attach them to the start of each source file to most effectively
-convey the exclusion of warranty; and each file should have at least
-the ``copyright'' line and a pointer to where the full notice is found.
-
-@smallexample
-@var{one line to give the program's name and a brief idea of what it does.}
-Copyright (C) 19@var{yy}  @var{name of author}
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-@end smallexample
-
-Also add information on how to contact you by electronic and paper mail.
-
-If the program is interactive, make it output a short notice like this
-when it starts in an interactive mode:
-
-@smallexample
-Gnomovision version 69, Copyright (C) 19@var{yy} @var{name of author}
-Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
-This is free software, and you are welcome to redistribute it
-under certain conditions; type `show c' for details.
-@end smallexample
-
-The hypothetical commands @samp{show w} and @samp{show c} should show
-the appropriate parts of the General Public License.  Of course, the
-commands you use may be called something other than @samp{show w} and
-@samp{show c}; they could even be mouse-clicks or menu items---whatever
-suits your program.
-
-You should also get your employer (if you work as a programmer) or your
-school, if any, to sign a ``copyright disclaimer'' for the program, if
-necessary.  Here is a sample; alter the names:
-
-@example
-Yoyodyne, Inc., hereby disclaims all copyright interest in the program
-`Gnomovision' (which makes passes at compilers) written by James Hacker.
-
-@var{signature of Ty Coon}, 1 April 1989
-Ty Coon, President of Vice
-@end example
-
-This General Public License does not permit incorporating your program into
-proprietary programs.  If your program is a subroutine library, you may
-consider it more useful to permit linking proprietary applications with the
-library.  If this is what you want to do, use the GNU Library General
-Public License instead of this License.
-
-
-@node Index,  , Copying, Top
-@unnumbered Index
-
-@printindex cp
-
-@tex
-% I think something like @colophon should be in texinfo.  In the
-% meantime:
-\long\def\colophon{\hbox to0pt{}\vfill
-\centerline{The body of this manual is set in}
-\centerline{\fontname\tenrm,}
-\centerline{with headings in {\bf\fontname\tenbf}}
-\centerline{and examples in {\tt\fontname\tentt}.}
-\centerline{{\it\fontname\tenit\/} and}
-\centerline{{\sl\fontname\tensl\/}}
-\centerline{are used for emphasis.}\vfill}
-\page\colophon
-% Blame: pesch@cygnus.com, 28mar91.
-@end tex
-
-@contents
-@bye
index 8fe5f91..e69de29 100755 (executable)
@@ -1,13 +0,0 @@
-_dnl__                                                         -*- Texinfo -*-
-_dnl__ Copyright (c) 1991 Free Software Foundation, Inc.
-_dnl__ This file is part of the source for the GDB manual.
-_dnl__ M4 FRAGMENT: $Id$
-_if__(_I960__)
-* i960-Nindy Remote::          _GDBN__ with a Remote i960 (Nindy)
-_fi__(_I960__)
-_if__(_AMD29K__)
-* EB29K Remote::               _GDBN__ with a Remote EB29K
-_fi__(_AMD29K__)
-_if__(_VXWORKS__)
-* VxWorks Remote::             _GDBN__ and VxWorks
-_fi__(_VXWORKS__)
index 82de97a..e69de29 100755 (executable)
@@ -1,427 +0,0 @@
-_dnl__                                                         -*- Texinfo -*-
-_dnl__ Copyright (c) 1990 1991 Free Software Foundation, Inc.
-_dnl__ This file is part of the source for the GDB manual.
-@c M4 FRAGMENT $Id$
-@c This text diverted to "Remote Debugging" section in general case;
-@c however, if we're doing a manual specifically for one of these, it
-@c belongs up front (in "Getting In and Out" chapter).
-_if__(_I960__)
-_if__(!_GENERIC__)
-@node i960-Nindy Remote, EB29K Remote, Mode Options, Starting _GDBN__
-_fi__(!_GENERIC__)
-_if__(_GENERIC__)
-@node i960-Nindy Remote, EB29K Remote, Remote, Remote
-_fi__(_GENERIC__)
-@subsection _GDBN__ with a Remote i960 (Nindy)
-
-@cindex Nindy
-@cindex i960
-@dfn{Nindy} is a ROM Monitor program for Intel 960 target systems.  When
-_GDBN__ is configured to control a remote Intel 960 using Nindy, you can
-tell _GDBN__ how to connect to the 960 in several ways:
-
-@itemize @bullet
-@item
-Through command line options specifying serial port, version of the
-Nindy protocol, and communications speed;
-
-@item
-By responding to a prompt on startup;
-
-@item
-By using the @code{target} command at any point during your _GDBN__
-session.  @xref{Target Commands}.
-
-@end itemize
-
-@menu
-* Nindy Startup::               Startup with Nindy
-* Nindy Options::               Options for Nindy
-* Nindy reset::                 Nindy Reset Command
-@end menu
-
-@node Nindy Startup, Nindy Options, i960-Nindy Remote, i960-Nindy Remote
-@subsubsection Startup with Nindy
-
-If you simply start @code{_GDBN__} without using any command-line
-options, you are prompted for what serial port to use, @emph{before} you
-reach the ordinary _GDBN__ prompt:
-@example
-Attach /dev/ttyNN -- specify NN, or "quit" to quit:  
-@end example
-@noindent
-Respond to the prompt with whatever suffix (after @samp{/dev/tty})
-identifies the serial port you want to use.  You can, if you choose,
-simply start up with no Nindy connection by responding to the prompt
-with an empty line.  If you do this, and later wish to attach to Nindy,
-use @code{target} (@pxref{Target Commands}).
-
-@node Nindy Options, Nindy reset, Nindy Startup, i960-Nindy Remote
-@subsubsection Options for Nindy
-
-These are the startup options for beginning your _GDBN__ session with a
-Nindy-960 board attached:
-
-@table @code
-@item -r @var{port}
-Specify the serial port name of a serial interface to be used to connect
-to the target system.  This option is only available when _GDBN__ is
-configured for the Intel 960 target architecture.  You may specify
-@var{port} as any of: a full pathname (e.g. @samp{-r /dev/ttya}), a
-device name in @file{/dev} (e.g. @samp{-r ttya}), or simply the unique
-suffix for a specific @code{tty} (e.g. @samp{-r a}).
-
-@item -O
-(An uppercase letter ``O'', not a zero.)  Specify that _GDBN__ should use
-the ``old'' Nindy monitor protocol to connect to the target system.
-This option is only available when _GDBN__ is configured for the Intel 960
-target architecture.
-
-@quotation
-@emph{Warning:} if you specify @samp{-O}, but are actually trying to
-connect to a target system that expects the newer protocol, the connection
-will fail, appearing to be a speed mismatch.  _GDBN__ will repeatedly
-attempt to reconnect at several different line speeds.  You can abort
-this process with an interrupt.
-@end quotation
-
-@item -brk
-Specify that _GDBN__ should first send a @code{BREAK} signal to the target
-system, in an attempt to reset it, before connecting to a Nindy target.
-
-@quotation
-@emph{Warning:} Many target systems do not have the hardware that this
-requires; it only works with a few boards.
-@end quotation
-
-@end table
-
-The standard @samp{-b} option controls the line speed used on the serial
-port. 
-
-@node Nindy reset,  , Nindy Options, i960-Nindy Remote
-@c @group
-@subsubsection Nindy Reset Command
-@table @code
-@item reset
-@kindex reset
-For a Nindy target, this command sends a ``break'' to the remote target
-system; this is only useful if the target has been equipped with a
-circuit to perform a hard reset (or some other interesting action) when
-a break is detected.
-@end table
-@c @end group
-_fi__(_I960__)
-
-_if__(_AMD29K__)
-_if__(!_GENERIC__)
-@node EB29K Remote, VxWorks Remote, i960-Nindy Remote, Starting _GDBN__
-_fi__(!_GENERIC__)
-_if__(_GENERIC__)
-@node EB29K Remote, VxWorks Remote, i960-Nindy Remote, Remote
-_fi__(_GENERIC__)
-@subsection _GDBN__ with a Remote EB29K
-
-@cindex EB29K board
-@cindex running 29K programs
-
-To use _GDBN__ from a Unix system to run programs on AMD's EB29K
-board in a PC, you must first connect a serial cable between the PC
-and a serial port on the Unix system.  In the following, we assume
-you've hooked the cable between the PC's @file{COM1} port and
-@file{/dev/ttya} on the Unix system.
-
-@menu
-* Comms (EB29K)::               Communications Setup
-* _GDBP__-EB29K::                   EB29K cross-debugging
-* Remote Log::                  Remote Log
-@end menu
-
-@node Comms (EB29K), _GDBP__-EB29K, EB29K Remote, EB29K Remote
-@subsubsection Communications Setup
-The next step is to set up the PC's port, by doing something like the
-following in DOS on the PC:
-_0__@example
-C:\> MODE com1:9600,n,8,1,none
-_1__@end example
-@noindent
-This example---run on an MS DOS 4.0 system---sets the PC port to 9600
-bps, no parity, eight data bits, one stop bit, and no ``retry'' action;
-you must match the communications parameters when establishing the Unix
-end of the connection as well.
-@c FIXME: Who knows what this "no retry action" crud from the DOS manual may
-@c       mean?  It's optional; leave it out? ---pesch@cygnus.com, 25feb91 
-
-To give control of the PC to the Unix side of the serial line, type
-the following at the DOS console:
-_0__@example
-C:\> CTTY com1
-_1__@end example
-@noindent
-(Later, if you wish to return control to the DOS console, you can use
-the command @code{CTTY con}---but you must send it over the device that
-had control, in our example over the @file{COM1} serial line).
-
-From the Unix host, use a communications program such as @code{tip} or
-@code{cu} to communicate with the PC; for example,
-@example
-cu -s 9600 -l /dev/ttya
-@end example
-@noindent
-The @code{cu} options shown specify, respectively, the linespeed and the
-serial port to use.  If you use @code{tip} instead, your command line
-may look something like the following:
-@example
-tip -9600 /dev/ttya
-@end example
-@noindent
-Your system may define a different name where our example uses
-@file{/dev/ttya} as the argument to @code{tip}.  The communications
-parameters, including what port to use, are associated with the
-@code{tip} argument in the ``remote'' descriptions file---normally the
-system table @file{/etc/remote}.
-@c FIXME: What if anything needs doing to match the "n,8,1,none" part of
-@c the DOS side's comms setup?  cu can support -o (odd
-@c parity), -e (even parity)---apparently no settings for no parity or
-@c for character size.  Taken from stty maybe...?  John points out tip
-@c can set these as internal variables, eg ~s parity=none; man stty
-@c suggests that it *might* work to stty these options with stdin or
-@c stdout redirected... ---pesch@cygnus.com, 25feb91
-
-@kindex EBMON
-Using the @code{tip} or @code{cu} connection, change the DOS working
-directory to the directory containing a copy of your 29K program, then
-start the PC program @code{EBMON} (an EB29K control program supplied
-with your board by AMD).  You should see an initial display from
-@code{EBMON} similar to the one that follows, ending with the
-@code{EBMON} prompt @samp{#}---
-_0__@example
-C:\> G:
-
-G:\> CD \usr\joe\work29k
-
-G:\USR\JOE\WORK29K> EBMON
-Am29000 PC Coprocessor Board Monitor, version 3.0-18
-Copyright 1990 Advanced Micro Devices, Inc.
-Written by Gibbons and Associates, Inc.
-
-Enter '?' or 'H' for help
-
-PC Coprocessor Type   = EB29K
-I/O Base              = 0x208
-Memory Base           = 0xd0000
-
-Data Memory Size      = 2048KB
-Available I-RAM Range = 0x8000 to 0x1fffff
-Available D-RAM Range = 0x80002000 to 0x801fffff
-
-PageSize              = 0x400
-Register Stack Size   = 0x800
-Memory Stack Size     = 0x1800
-
-CPU PRL               = 0x3
-Am29027 Available     = No
-Byte Write Available  = Yes
-
-# ~.
-_1__@end example
-
-Then exit the @code{cu} or @code{tip} program (done in the example by
-typing @code{~.} at the @code{EBMON} prompt).  @code{EBMON} will keep
-running, ready for _GDBN__ to take over.
-
-For this example, we've assumed what is probably the most convenient
-way to make sure the same 29K program is on both the PC and the Unix
-system: a PC/NFS connection that establishes ``drive @code{G:}'' on the
-PC as a file system on the Unix host.  If you don't have PC/NFS or
-something similar connecting the two systems, you must arrange some
-other way---perhaps floppy-disk transfer---of getting the 29K program
-from the Unix system to the PC; _GDBN__ will @emph{not} download it over the
-serial line.
-
-@node _GDBP__-EB29K, Remote Log, Comms (EB29K), EB29K Remote
-@subsubsection EB29K cross-debugging
-Finally, @code{cd} to the directory containing an image of your 29K
-program on the Unix system, and start _GDBN__---specifying as argument the
-name of your 29K program:
-@example
-cd /usr/joe/work29k
-_GDBP__ myfoo
-@end example
-Now you can use the @code{target} command:
-@example
-target amd-eb /dev/ttya 9600 MYFOO
-@end example
-@c FIXME: test above 'target amd-eb' as spelled, with caps!  caps are meant to
-@c emphasize that this is the name as seen by DOS (since I think DOS is
-@c single-minded about case of letters).  ---pesch@cygnus.com, 25feb91
-
-@noindent
-In this example, we've assumed your program is in a file called
-@file{myfoo}.  Note that the filename given as the last argument to
-@code{target amd-eb} should be the name of the program as it appears to DOS.
-In our example this is simply @code{MYFOO}, but in general it can include
-a DOS path, and depending on your transfer mechanism may not resemble
-the name on the Unix side.
-
-At this point, you can set any breakpoints you wish; when you're ready
-to see your program run on the 29K board, use the _GDBN__ command
-@code{run}.
-
-To stop debugging the remote program, use the _GDBN__ @code{detach}
-command.  
-
-To return control of the PC to its console, use @code{tip} or @code{cu}
-once again, after your _GDBN__ session has concluded, to attach to
-@code{EBMON}.  You can then type the command @code{q} to shut down
-@code{EBMON}, returning control to the DOS command-line interpreter.
-Type @code{CTTY con} to return command input to the main DOS console,
-and type @kbd{~.} to leave @code{tip} or @code{cu}.
-
-@node Remote Log,  , _GDBP__-EB29K, EB29K Remote
-@subsubsection Remote Log
-@kindex eb.log
-@cindex log file for EB29K
-The @code{target amd-eb} command creates a file @file{eb.log} in the
-current working directory, to help debug problems with the connection.
-@file{eb.log} records all the output from @code{EBMON}, including echoes
-of the commands sent to it.  Running @samp{tail -f} on this file in
-another window often helps to understand trouble with @code{EBMON}, or
-unexpected events on the PC side of the connection.
-_fi__(_AMD29K__)
-
-_if__(_VXWORKS__)
-_if__(!_GENERIC__)
-@node VxWorks Remote,  , EB29K Remote, Starting _GDBN__
-_fi__(!_GENERIC__)
-_if__(_GENERIC__)
-@node VxWorks Remote,  , EB29K Remote, Remote
-_fi__(_GENERIC__)
-@subsection _GDBN__ and VxWorks
-@cindex VxWorks
-_GDBN__ enables developers to spawn and debug tasks running on networked
-VxWorks targets from a Unix host.  Already-running tasks spawned from
-the VxWorks shell can also be debugged.  _GDBN__ uses code that runs on
-both the UNIX host and on the VxWorks target.  The program
-@code{_GDBP__} is installed and executed on the UNIX host.  
-
-The remote debugging interface (RDB) routines are installed and executed
-on the VxWorks target.  These routines are included in the VxWorks library
-@file{rdb.a} and are incorporated into the system image when source-level
-debugging is enabled in the VxWorks configuration.
-
-@kindex INCLUDE_RDB
-Defining @code{INCLUDE_RDB} in the VxWorks configuration file
-@file{configAll.h} includes the RDB interface routines and spawns the
-source debugging task @code{tRdbTask} when VxWorks is booted.  For more
-information on configuring and remaking VxWorks, see the @cite{VxWorks
-Programmer's Guide}.
-
-Once you have included the RDB interface in your VxWorks system image
-and set your Unix execution search path to find _GDBN__, you are ready
-to run _GDBN__.  From your UNIX host, type:
-
-@smallexample
-% _GDBP__
-@end smallexample
-
-_GDBN__ will come up showing the prompt:
-
-@smallexample
-(_GDBP__)
-@end smallexample
-
-@menu
-* VxWorks connection::          Connecting to VxWorks
-* VxWorks download::            VxWorks Download
-* VxWorks attach::              Running Tasks
-@end menu
-
-@node VxWorks connection, VxWorks download, VxWorks Remote, VxWorks Remote
-@subsubsection Connecting to VxWorks
-
-The _GDBN__ command @code{target} lets you connect to a VxWorks target on the
-network.  To connect to a target whose host name is ``@code{tt}'', type:
-
-@smallexample
-(_GDBP__) target vxworks tt
-@end smallexample
-
-_GDBN__ will display a message similar to the following:
-
-@smallexample
-Attaching remote machine across net... Success!
-@end smallexample
-
-_GDBN__ will then attempt to read the symbol tables of any object
-modules loaded into the VxWorks target since it was last booted.
-_GDBN__ locates these files by searching the directories listed in the
-command search path (@pxref{Environment}); if it fails to find an
-object file, it will display a message such as:
-
-@smallexample
-prog.o: No such file or directory.
-@end smallexample
-
-This will cause the @code{target} command to abort.  When this happens,
-you should add the appropriate directory to the search path, with the
-_GDBN__ command @code{path}, and execute the @code{target} command
-again.
-
-@node VxWorks download, VxWorks attach, VxWorks connection, VxWorks Remote
-@subsubsection VxWorks Download
-
-@cindex download to VxWorks
-If you have connected to the VxWorks target and you want to debug an
-object that has not yet been loaded, you can use the _GDBN__ @code{load}
-command to download a file from UNIX to VxWorks incrementally.  The
-object file given as an argument to the @code{load} command is actually
-opened twice: first by the VxWorks target in order to download the code,
-then by _GDBN__ in order to read the symbol table.  This can lead to
-problems if the current working directories on the two systems differ.
-It is simplest to set the working directory on both systems to the
-directory in which the object file resides, and then to reference the
-file by its name, without any path.  Thus, to load a program
-@file{prog.o}, residing in @file{wherever/vw/demo/rdb}, on VxWorks type:
-
-@smallexample
--> cd "wherever/vw/demo/rdb"
-@end smallexample
-
-On _GDBN__ type:
-
-@smallexample
-(_GDBP__) cd wherever/vw/demo/rdb 
-(_GDBP__) load prog.o
-@end smallexample
-
-_GDBN__ will display a response similar to the following:
-
-@smallexample
-Reading symbol data from wherever/vw/demo/rdb/prog.o... done.
-@end smallexample
-
-You can also use the @code{load} command to reload an object module
-after editing and recompiling the corresponding source file.  Note that
-this will cause _GDBN__ to delete all currently-defined breakpoints,
-auto-displays, and convenience variables, and to clear the value
-history.  (This is necessary in order to preserve the integrity of
-debugger data structures that reference the target system's symbol
-table.)
-
-@node VxWorks attach,  , VxWorks download, VxWorks Remote
-@subsubsection Running Tasks
-
-@cindex running VxWorks tasks
-You can also attach to an existing task using the @code{attach} command as
-follows:
-
-@smallexample
-(_GDBP__) attach @var{task}
-@end smallexample
-
-where @var{task} is the VxWorks hexadecimal task ID.  The task can be running
-or suspended when you attach to it.  If running, it will be suspended at
-the time of attachment.
-
-_fi__(_VXWORKS__)
index 1b44a07..e69de29 100755 (executable)
@@ -1,22 +0,0 @@
-% $Id$
-% To choose CM (Computer Modern) fonts for the refcard, link
-% or copy this file to rcfonts.tex
-% 
-%The Times-Roman family is both more attractive and more compact than 
-%Computer Modern.  On the other hand, while common, it is not free.  
-%There are three sets of font definitions:
-%  1) rc-cm.tex uses the free (Computer Modern) fonts
-%  2) rc-ps.tex uses common PostScript fonts, with fontnames from the
-%  Karl Berry scheme recommended in the documentation for dvips.
-%  3) rc-pslong.tex uses common PostScript fonts, with the long names
-%  used by PostScript programs directly.
-%
-%-------------------- Computer Modern font defs: --------------------
-\font\bbf=cmbx10
-\font\vbbf=cmbx12
-\font\smrm=cmr5
-\font\brm=cmr10
-\font\rm=cmr7
-\font\it=cmti7
-\font\tt=cmtt8
-%-------------------- end font defs ---------------------------------
index 1a0e970..e69de29 100755 (executable)
@@ -1,30 +0,0 @@
-% $Id$
-% To choose PS fonts (Karl Berry TeX fontnames) for the refcard, link
-% or copy this file to rcfonts.tex
-% 
-%The Times-Roman family is both more attractive and more compact than 
-%Computer Modern.  On the other hand, while common, it is not free.  
-%There are three sets of font definitions:
-%  1) rc-cm.tex uses the free (Computer Modern) fonts
-%  2) rc-ps.tex uses common PostScript fonts, with fontnames from the
-%  Karl Berry scheme recommended in the documentation for dvips.
-%  3) rc-pslong.tex uses common PostScript fonts, with the long names
-%  used by PostScript programs directly.
-%
-% One caution: due to differing character ordering between TeX and PS,
-%if your TeX is pre-3.0, or if you don't have virtual Courier
-%matching the TeX character positions, you might want to use CMtt for
-%\tt even if you switch to PostScript fonts for the rest of the text.
-%
-%-------------------- PostScript fonts (K Berry names) --------------
-\font\bbf=ptmb at 10pt
-\font\vbbf=ptmb at 12pt
-\font\smrm=ptmr at 6pt
-\font\brm=ptmr at 10pt
-\font\rm=ptmr at 8pt
-\font\it=ptmri at 8pt
-\font\tt=pcrr at 8pt
-% Used only for \copyright, replacing plain TeX macro.
-\font\sym=psyr at 7pt
-\def\copyright{{\sym\char'323}}
-%-------------------- end font defs ---------------------------------
index 24643d1..e69de29 100755 (executable)
@@ -1,30 +0,0 @@
-% $Id$
-% To choose PS fonts (long PS fontnames) for the refcard, link
-% or copy this file to rcfonts.tex
-% 
-%The Times-Roman family is both more attractive and more compact than 
-%Computer Modern.  On the other hand, while common, it is not free.  
-%There are three sets of font definitions:
-%  1) rc-cm.tex uses the free (Computer Modern) fonts
-%  2) rc-ps.tex uses common PostScript fonts, with fontnames from the
-%  Karl Berry scheme recommended in the documentation for dvips.
-%  3) rc-pslong.tex uses common PostScript fonts, with the long names
-%  used by PostScript programs directly.
-%
-% One caution: due to differing character ordering between TeX and PS,
-%if your TeX is pre-3.0, or if you don't have virtual Courier
-%matching the TeX character positions, you might want to use CMtt for
-%\tt even if you switch to PostScript fonts for the rest of the text.
-%
-%-------------------- PostScript fonts (long names) -----------------
-\font\bbf=Times-Bold at 10pt
-\font\vbbf=Times-Bold at 12pt
-\font\smrm=Times-Roman at 6pt
-\font\brm=Times-Roman at 10pt
-\font\rm=Times-Roman at 8pt
-\font\it=Times-Italic at 8pt
-\font\tt=Courier at 8pt
-% Used only for \copyright, replacing plain TeX macro.
-\font\sym=Symbol at 7pt
-\def\copyright{{\sym\char'323}}
-%-------------------- end font defs ---------------------------------
index bc92490..e69de29 100755 (executable)
@@ -1,2 +0,0 @@
-@include ./../../readline/doc/rluser.texinfo
-@include ./../../readline/doc/inc-hist.texi
diff --git a/gdb/doc/threecol.tex b/gdb/doc/threecol.tex
deleted file mode 100755 (executable)
index a4622c4..0000000
+++ /dev/null
@@ -1,46 +0,0 @@
-%Three-column format for landscape printing on 8.5x11 paper
-%pesch 1990 december 31
-%We want output .25 inch *from paper edge*; i.e. -.75in from TeX default
-\hoffset=-0.8in \voffset=-0.75in
-\newdimen\fullhsize
-\fullhsize=10.5in \hsize=3.3in
-\def\fulline{\hbox to \fullhsize}
-\let\lcr=L \newbox\leftcolumn\newbox\centercolumn
-\output={\if L\lcr
-            \global\setbox\leftcolumn=\columnbox \global\let\lcr=C
-        \else
-            \if C\lcr
-               \global\setbox\centercolumn=\columnbox \global\let\lcr=R
-            \else \tripleformat \global\let\lcr=L
-            \fi
-         \fi
-%         \ifnum\outputpenalty>-20000 \else\dosupereject\fi
-      }
-%
-%ALTERNATIVE FOLDING GUIDES:
-%
-%For NO printed folding guide, comment out other \def\vdecor's and uncomment:
-%\def\vdecor{\hskip .2in plus1fil}
-%
-%For SOLID LINE folding guide, comment out other \def\vdecor's and uncomment:
-%\def\vdecor{\hskip .1in plus1fil \vrule width .1pt \hskip .1in plus1fil}
-%
-%For SMALL MARKS NEAR TOP AND BOTTOM as folding guide,
-%comment out other \def\vdecor's and uncomment:
-\def\vdecor{\hskip .1in plus1fil 
-\vbox to \vsize{\hbox to .1pt{\vrule height 2pt width .1pt}\vfill
-\hbox to .1pt{\vrule height 2pt width .1pt}}
-\hskip .1in plus1fil}
-%
-%END OF ALTERNATIVES FOR FOLDING GUIDES
-%
-\def\tripleformat{\shipout\vbox{\fulline{\box\leftcolumn\vdecor
-                                         \box\centercolumn\vdecor
-                                         \columnbox}
-                              }
-                 \advancepageno}
-\def\columnbox{\leftline{\pagebody}}
-\def\bye{\par\vfill
-         \supereject
-         \if R\lcr \null\vfill\eject\fi
-         \end}
index 519763d..e69de29 100755 (executable)
@@ -1,336 +0,0 @@
-/* Byte swap a symbol table in MIPS' format (Third-Eye).
-   Copyright 1992 Free Software Foundation, Inc.
-
-This file is part of GDB.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-#include "defs.h"
-#include "bfd.h"
-#define        LANGUAGE_C              /* Wierd MIPS crap */
-#include "sym.h"               /* MIPS symbols */
-#include "symconst.h"          /* MIPS symbols */
-#include "coff/ecoff-ext.h"    /* ECOFF external struct defns */
-
-void
-ecoff_swap_hdr_in (abfd, ext_copy, intern)
-     bfd *abfd;
-     struct hdr_ext *ext_copy;
-     HDRR *intern;
-{
-  struct hdr_ext ext[1];
-
-  *ext = *ext_copy;
-
-  intern->magic         = bfd_h_get_16 (abfd, (bfd_byte *)ext->h_magic);
-  intern->vstamp        = bfd_h_get_16 (abfd, (bfd_byte *)ext->h_vstamp);
-  intern->ilineMax      = bfd_h_get_32 (abfd, (bfd_byte *)ext->h_ilineMax);
-  intern->cbLine        = bfd_h_get_32 (abfd, (bfd_byte *)ext->h_cbLine);
-  intern->cbLineOffset  = bfd_h_get_32 (abfd, (bfd_byte *)ext->h_cbLineOffset);
-  intern->idnMax        = bfd_h_get_32 (abfd, (bfd_byte *)ext->h_idnMax);
-  intern->cbDnOffset    = bfd_h_get_32 (abfd, (bfd_byte *)ext->h_cbDnOffset);
-  intern->ipdMax        = bfd_h_get_32 (abfd, (bfd_byte *)ext->h_ipdMax);
-  intern->cbPdOffset    = bfd_h_get_32 (abfd, (bfd_byte *)ext->h_cbPdOffset);
-  intern->isymMax       = bfd_h_get_32 (abfd, (bfd_byte *)ext->h_isymMax);
-  intern->cbSymOffset   = bfd_h_get_32 (abfd, (bfd_byte *)ext->h_cbSymOffset);
-  intern->ioptMax       = bfd_h_get_32 (abfd, (bfd_byte *)ext->h_ioptMax);
-  intern->cbOptOffset   = bfd_h_get_32 (abfd, (bfd_byte *)ext->h_cbOptOffset);
-  intern->iauxMax       = bfd_h_get_32 (abfd, (bfd_byte *)ext->h_iauxMax);
-  intern->cbAuxOffset   = bfd_h_get_32 (abfd, (bfd_byte *)ext->h_cbAuxOffset);
-  intern->issMax        = bfd_h_get_32 (abfd, (bfd_byte *)ext->h_issMax);
-  intern->cbSsOffset    = bfd_h_get_32 (abfd, (bfd_byte *)ext->h_cbSsOffset);
-  intern->issExtMax     = bfd_h_get_32 (abfd, (bfd_byte *)ext->h_issExtMax);
-  intern->cbSsExtOffset = bfd_h_get_32 (abfd, (bfd_byte *)ext->h_cbSsExtOffset);
-  intern->ifdMax        = bfd_h_get_32 (abfd, (bfd_byte *)ext->h_ifdMax);
-  intern->cbFdOffset    = bfd_h_get_32 (abfd, (bfd_byte *)ext->h_cbFdOffset);
-  intern->crfd          = bfd_h_get_32 (abfd, (bfd_byte *)ext->h_crfd);
-  intern->cbRfdOffset   = bfd_h_get_32 (abfd, (bfd_byte *)ext->h_cbRfdOffset);
-  intern->iextMax       = bfd_h_get_32 (abfd, (bfd_byte *)ext->h_iextMax);
-  intern->cbExtOffset   = bfd_h_get_32 (abfd, (bfd_byte *)ext->h_cbExtOffset);
-
-#ifdef TEST
-  if (memcmp ((char *)ext, (char *)intern, sizeof (*intern)) != 0)
-    abort();
-#endif
-}
-
-/* Swap in the file descriptor record.  */
-
-void
-ecoff_swap_fdr_in (abfd, ext_copy, intern)
-     bfd *abfd;
-     struct fdr_ext *ext_copy;
-     FDR *intern;
-{
-  struct fdr_ext ext[1];
-
-  *ext = *ext_copy;            /* Make it reasonable to do in-place.  */
-  
-  intern->adr           = bfd_h_get_32 (abfd, (bfd_byte *)ext->f_adr);
-  intern->rss           = bfd_h_get_32 (abfd, (bfd_byte *)ext->f_rss);
-  intern->issBase       = bfd_h_get_32 (abfd, (bfd_byte *)ext->f_issBase);
-  intern->cbSs          = bfd_h_get_32 (abfd, (bfd_byte *)ext->f_cbSs);
-  intern->isymBase      = bfd_h_get_32 (abfd, (bfd_byte *)ext->f_isymBase);
-  intern->csym          = bfd_h_get_32 (abfd, (bfd_byte *)ext->f_csym);
-  intern->ilineBase     = bfd_h_get_32 (abfd, (bfd_byte *)ext->f_ilineBase);
-  intern->cline         = bfd_h_get_32 (abfd, (bfd_byte *)ext->f_cline);
-  intern->ioptBase      = bfd_h_get_32 (abfd, (bfd_byte *)ext->f_ioptBase);
-  intern->copt          = bfd_h_get_32 (abfd, (bfd_byte *)ext->f_copt);
-  intern->ipdFirst      = bfd_h_get_16 (abfd, (bfd_byte *)ext->f_ipdFirst);
-  intern->cpd           = bfd_h_get_16 (abfd, (bfd_byte *)ext->f_cpd);
-  intern->iauxBase      = bfd_h_get_32 (abfd, (bfd_byte *)ext->f_iauxBase);
-  intern->caux          = bfd_h_get_32 (abfd, (bfd_byte *)ext->f_caux);
-  intern->rfdBase       = bfd_h_get_32 (abfd, (bfd_byte *)ext->f_rfdBase);
-  intern->crfd          = bfd_h_get_32 (abfd, (bfd_byte *)ext->f_crfd);
-
-  /* now the fun stuff... */
-  if (abfd->xvec->header_byteorder_big_p != false) {
-    intern->lang        = (ext->f_bits1[0] & FDR_BITS1_LANG_BIG)
-                                       >> FDR_BITS1_LANG_SH_BIG;
-    intern->fMerge      = 0 != (ext->f_bits1[0] & FDR_BITS1_FMERGE_BIG);
-    intern->fReadin     = 0 != (ext->f_bits1[0] & FDR_BITS1_FREADIN_BIG);
-    intern->fBigendian  = 0 != (ext->f_bits1[0] & FDR_BITS1_FBIGENDIAN_BIG);
-    intern->glevel      = (ext->f_bits2[0] & FDR_BITS2_GLEVEL_BIG)
-                                       >> FDR_BITS2_GLEVEL_SH_BIG;
- /* intern->reserved  we ignore.  */
-  } else {
-    intern->lang        = (ext->f_bits1[0] & FDR_BITS1_LANG_LITTLE)
-                                       >> FDR_BITS1_LANG_SH_LITTLE;
-    intern->fMerge      = 0 != (ext->f_bits1[0] & FDR_BITS1_FMERGE_LITTLE);
-    intern->fReadin     = 0 != (ext->f_bits1[0] & FDR_BITS1_FREADIN_LITTLE);
-    intern->fBigendian  = 0 != (ext->f_bits1[0] & FDR_BITS1_FBIGENDIAN_LITTLE);
-    intern->glevel      = (ext->f_bits2[0] & FDR_BITS2_GLEVEL_LITTLE)
-                                       >> FDR_BITS2_GLEVEL_SH_LITTLE;
- /* intern->reserved  we ignore.  */
-  }
-
-  intern->cbLineOffset  = bfd_h_get_32 (abfd, (bfd_byte *)ext->f_cbLineOffset);
-  intern->cbLine        = bfd_h_get_32 (abfd, (bfd_byte *)ext->f_cbLine);
-
-#ifdef TEST
-  if (memcmp ((char *)ext, (char *)intern, sizeof (*intern)) != 0)
-    abort();
-#endif
-}
-
-
-
-/* Swap in the procedure descriptor record.  */
-
-void
-ecoff_swap_pdr_in (abfd, ext_copy, intern)
-     bfd *abfd;
-     struct pdr_ext *ext_copy;
-     PDR *intern;
-{
-  struct pdr_ext ext[1];
-
-  *ext = *ext_copy;            /* Make it reasonable to do in-place.  */
-  
-  intern->adr           = bfd_h_get_32 (abfd, (bfd_byte *)ext->p_adr);
-  intern->isym          = bfd_h_get_32 (abfd, (bfd_byte *)ext->p_isym);
-  intern->iline         = bfd_h_get_32 (abfd, (bfd_byte *)ext->p_iline);
-  intern->regmask       = bfd_h_get_32 (abfd, (bfd_byte *)ext->p_regmask);
-  intern->regoffset     = bfd_h_get_32 (abfd, (bfd_byte *)ext->p_regoffset);
-  intern->iopt          = bfd_h_get_32 (abfd, (bfd_byte *)ext->p_iopt);
-  intern->fregmask      = bfd_h_get_32 (abfd, (bfd_byte *)ext->p_fregmask);
-  intern->fregoffset    = bfd_h_get_32 (abfd, (bfd_byte *)ext->p_fregoffset);
-  intern->frameoffset   = bfd_h_get_32 (abfd, (bfd_byte *)ext->p_frameoffset);
-  intern->framereg      = bfd_h_get_16 (abfd, (bfd_byte *)ext->p_framereg);
-  intern->pcreg         = bfd_h_get_16 (abfd, (bfd_byte *)ext->p_pcreg);
-  intern->lnLow         = bfd_h_get_32 (abfd, (bfd_byte *)ext->p_lnLow);
-  intern->lnHigh        = bfd_h_get_32 (abfd, (bfd_byte *)ext->p_lnHigh);
-  intern->cbLineOffset  = bfd_h_get_32 (abfd, (bfd_byte *)ext->p_cbLineOffset);
-
-#ifdef TEST
-  if (memcmp ((char *)ext, (char *)intern, sizeof (*intern)) != 0)
-    abort();
-#endif
-}
-
-
-/* Swap in a symbol record.  */
-
-void
-ecoff_swap_sym_in (abfd, ext_copy, intern)
-     bfd *abfd;
-     struct sym_ext *ext_copy;
-     SYMR *intern;
-{
-  struct sym_ext ext[1];
-
-  *ext = *ext_copy;            /* Make it reasonable to do in-place.  */
-  
-  intern->iss           = bfd_h_get_32 (abfd, (bfd_byte *)ext->s_iss);
-  intern->value         = bfd_h_get_32 (abfd, (bfd_byte *)ext->s_value);
-
-  /* now the fun stuff... */
-  if (abfd->xvec->header_byteorder_big_p != false) {
-    intern->st          =  (ext->s_bits1[0] & SYM_BITS1_ST_BIG)
-                                          >> SYM_BITS1_ST_SH_BIG;
-    intern->sc          = ((ext->s_bits1[0] & SYM_BITS1_SC_BIG)
-                                          << SYM_BITS1_SC_SH_LEFT_BIG)
-                       | ((ext->s_bits2[0] & SYM_BITS2_SC_BIG)
-                                          >> SYM_BITS2_SC_SH_BIG);
-    intern->reserved    = 0 != (ext->s_bits2[0] & SYM_BITS2_RESERVED_BIG);
-    intern->index       = ((ext->s_bits2[0] & SYM_BITS2_INDEX_BIG)
-                                          << SYM_BITS2_INDEX_SH_LEFT_BIG)
-                       | (ext->s_bits3[0] << SYM_BITS3_INDEX_SH_LEFT_BIG)
-                       | (ext->s_bits4[0] << SYM_BITS4_INDEX_SH_LEFT_BIG);
-  } else {
-    intern->st          =  (ext->s_bits1[0] & SYM_BITS1_ST_LITTLE)
-                                          >> SYM_BITS1_ST_SH_LITTLE;
-    intern->sc          = ((ext->s_bits1[0] & SYM_BITS1_SC_LITTLE)
-                                          >> SYM_BITS1_SC_SH_LITTLE)
-                       | ((ext->s_bits2[0] & SYM_BITS2_SC_LITTLE)
-                                          << SYM_BITS2_SC_SH_LEFT_LITTLE);
-    intern->reserved    = 0 != (ext->s_bits2[0] & SYM_BITS2_RESERVED_LITTLE);
-    intern->index       = ((ext->s_bits2[0] & SYM_BITS2_INDEX_LITTLE)
-                                          >> SYM_BITS2_INDEX_SH_LITTLE)
-                       | (ext->s_bits3[0] << SYM_BITS3_INDEX_SH_LEFT_LITTLE)
-                       | (ext->s_bits4[0] << SYM_BITS4_INDEX_SH_LEFT_LITTLE);
-  }
-
-#ifdef TEST
-  if (memcmp ((char *)ext, (char *)intern, sizeof (*intern)) != 0)
-    abort();
-#endif
-}
-
-
-/* Swap in an external symbol record.  */
-
-void
-ecoff_swap_ext_in (abfd, ext_copy, intern)
-     bfd *abfd;
-     struct ext_ext *ext_copy;
-     EXTR *intern;
-{
-  struct ext_ext ext[1];
-
-  *ext = *ext_copy;            /* Make it reasonable to do in-place.  */
-  
-  /* now the fun stuff... */
-  if (abfd->xvec->header_byteorder_big_p != false) {
-    intern->jmptbl      = 0 != (ext->es_bits1[0] & EXT_BITS1_JMPTBL_BIG);
-    intern->cobol_main  = 0 != (ext->es_bits1[0] & EXT_BITS1_COBOL_MAIN_BIG);
-  } else {
-    intern->jmptbl      = 0 != (ext->es_bits1[0] & EXT_BITS1_JMPTBL_LITTLE);
-    intern->cobol_main  = 0 != (ext->es_bits1[0] & EXT_BITS1_COBOL_MAIN_LITTLE);
-  }
-
-  intern->ifd           = bfd_h_get_16 (abfd, (bfd_byte *)ext->es_ifd);
-  ecoff_swap_sym_in (abfd, &ext->es_asym, &intern->asym);
-
-#ifdef TEST
-  if (memcmp ((char *)ext, (char *)intern, sizeof (*intern)) != 0)
-    abort();
-#endif
-}
-
-/* Swap in a type information record.
-   BIGEND says whether AUX symbols are big-endian or little-endian; this
-   info comes from the file header record (fh-fBigendian).  */
-
-void
-ecoff_swap_tir_in (bigend, ext_copy, intern)
-     int bigend;
-     struct tir_ext *ext_copy;
-     TIR *intern;
-{
-  struct tir_ext ext[1];
-
-  *ext = *ext_copy;            /* Make it reasonable to do in-place.  */
-  
-  /* now the fun stuff... */
-  if (bigend) {
-    intern->fBitfield   = 0 != (ext->t_bits1[0] & TIR_BITS1_FBITFIELD_BIG);
-    intern->continued   = 0 != (ext->t_bits1[0] & TIR_BITS1_CONTINUED_BIG);
-    intern->bt          = (ext->t_bits1[0] & TIR_BITS1_BT_BIG)
-                       >>                  TIR_BITS1_BT_SH_BIG;
-    intern->tq4         = (ext->t_tq45[0] & TIR_BITS_TQ4_BIG)
-                       >>                  TIR_BITS_TQ4_SH_BIG;
-    intern->tq5         = (ext->t_tq45[0] & TIR_BITS_TQ5_BIG)
-                       >>                  TIR_BITS_TQ5_SH_BIG;
-    intern->tq0         = (ext->t_tq01[0] & TIR_BITS_TQ0_BIG)
-                       >>                  TIR_BITS_TQ0_SH_BIG;
-    intern->tq1         = (ext->t_tq01[0] & TIR_BITS_TQ1_BIG)
-                       >>                  TIR_BITS_TQ1_SH_BIG;
-    intern->tq2         = (ext->t_tq23[0] & TIR_BITS_TQ2_BIG)
-                       >>                  TIR_BITS_TQ2_SH_BIG;
-    intern->tq3         = (ext->t_tq23[0] & TIR_BITS_TQ3_BIG)
-                       >>                  TIR_BITS_TQ3_SH_BIG;
-  } else {
-    intern->fBitfield   = 0 != (ext->t_bits1[0] & TIR_BITS1_FBITFIELD_LITTLE);
-    intern->continued   = 0 != (ext->t_bits1[0] & TIR_BITS1_CONTINUED_LITTLE);
-    intern->bt          = (ext->t_bits1[0] & TIR_BITS1_BT_LITTLE)
-                       >>                  TIR_BITS1_BT_SH_LITTLE;
-    intern->tq4         = (ext->t_tq45[0] & TIR_BITS_TQ4_LITTLE)
-                       >>                  TIR_BITS_TQ4_SH_LITTLE;
-    intern->tq5         = (ext->t_tq45[0] & TIR_BITS_TQ5_LITTLE)
-                       >>                  TIR_BITS_TQ5_SH_LITTLE;
-    intern->tq0         = (ext->t_tq01[0] & TIR_BITS_TQ0_LITTLE)
-                       >>                  TIR_BITS_TQ0_SH_LITTLE;
-    intern->tq1         = (ext->t_tq01[0] & TIR_BITS_TQ1_LITTLE)
-                       >>                  TIR_BITS_TQ1_SH_LITTLE;
-    intern->tq2         = (ext->t_tq23[0] & TIR_BITS_TQ2_LITTLE)
-                       >>                  TIR_BITS_TQ2_SH_LITTLE;
-    intern->tq3         = (ext->t_tq23[0] & TIR_BITS_TQ3_LITTLE)
-                       >>                  TIR_BITS_TQ3_SH_LITTLE;
-  }
-
-#ifdef TEST
-  if (memcmp ((char *)ext, (char *)intern, sizeof (*intern)) != 0)
-    abort();
-#endif
-}
-
-/* Swap in a relative symbol record.  BIGEND says whether it is in
-   big-endian or little-endian format.*/
-
-void
-ecoff_swap_rndx_in (bigend, ext_copy, intern)
-     int bigend;
-     struct rndx_ext *ext_copy;
-     RNDXR *intern;
-{
-  struct rndx_ext ext[1];
-
-  *ext = *ext_copy;            /* Make it reasonable to do in-place.  */
-  
-  /* now the fun stuff... */
-  if (bigend) {
-    intern->rfd   = (ext->r_bits[0] << RNDX_BITS0_RFD_SH_LEFT_BIG)
-                 | ((ext->r_bits[1] & RNDX_BITS1_RFD_BIG)
-                                   >> RNDX_BITS1_RFD_SH_BIG);
-    intern->index = ((ext->r_bits[1] & RNDX_BITS1_INDEX_BIG)
-                                   << RNDX_BITS1_INDEX_SH_LEFT_BIG)
-                 | (ext->r_bits[2] << RNDX_BITS2_INDEX_SH_LEFT_BIG)
-                 | (ext->r_bits[3] << RNDX_BITS3_INDEX_SH_LEFT_BIG);
-  } else {
-    intern->rfd   = (ext->r_bits[0] << RNDX_BITS0_RFD_SH_LEFT_LITTLE)
-                 | ((ext->r_bits[1] & RNDX_BITS1_RFD_LITTLE)
-                                   << RNDX_BITS1_RFD_SH_LEFT_LITTLE);
-    intern->index = ((ext->r_bits[1] & RNDX_BITS1_INDEX_LITTLE)
-                                   >> RNDX_BITS1_INDEX_SH_LITTLE)
-                 | (ext->r_bits[2] << RNDX_BITS2_INDEX_SH_LEFT_LITTLE)
-                 | (ext->r_bits[3] << RNDX_BITS3_INDEX_SH_LEFT_LITTLE);
-  }
-
-#ifdef TEST
-  if (memcmp ((char *)ext, (char *)intern, sizeof (*intern)) != 0)
-    abort();
-#endif
-}
diff --git a/gdb/expread.tab.c b/gdb/expread.tab.c
deleted file mode 100755 (executable)
index bb9894c..0000000
+++ /dev/null
@@ -1,2948 +0,0 @@
-
-/*  A Bison parser, made from ./expread.y  */
-
-#define        INT     258
-#define        CHAR    259
-#define        UINT    260
-#define        FLOAT   261
-#define        STRING  262
-#define        NAME    263
-#define        BLOCKNAME       264
-#define        TYPENAME        265
-#define        NAME_OR_INT     266
-#define        NAME_OR_UINT    267
-#define        STRUCT  268
-#define        UNION   269
-#define        ENUM    270
-#define        SIZEOF  271
-#define        UNSIGNED        272
-#define        COLONCOLON      273
-#define        ERROR   274
-#define        SIGNED  275
-#define        LONG    276
-#define        SHORT   277
-#define        INT_KEYWORD     278
-#define        LAST    279
-#define        REGNAME 280
-#define        VARIABLE        281
-#define        ASSIGN_MODIFY   282
-#define        THIS    283
-#define        ABOVE_COMMA     284
-#define        OR      285
-#define        AND     286
-#define        EQUAL   287
-#define        NOTEQUAL        288
-#define        LEQ     289
-#define        GEQ     290
-#define        LSH     291
-#define        RSH     292
-#define        UNARY   293
-#define        INCREMENT       294
-#define        DECREMENT       295
-#define        ARROW   296
-
-#line 29 "./expread.y"
-
-#include <stdio.h>
-#include "defs.h"
-#include "param.h"
-#include "symtab.h"
-#include "frame.h"
-#include "expression.h"
-#include "value.h"
-#include "command.h"
-
-static struct expression *expout;
-static int expout_size;
-static int expout_ptr;
-
-static int yylex ();
-static void yyerror ();
-static void write_exp_elt ();
-static void write_exp_elt_opcode ();
-static void write_exp_elt_sym ();
-static void write_exp_elt_longcst ();
-static void write_exp_elt_dblcst ();
-static void write_exp_elt_type ();
-static void write_exp_elt_intern ();
-static void write_exp_string ();
-static void start_arglist ();
-static int end_arglist ();
-static void free_funcalls ();
-static char *copy_name ();
-static int parse_number ();
-
-/* If this is nonzero, this block is used as the lexical context
-   for symbol names.  */
-
-static struct block *expression_context_block;
-
-/* The innermost context required by the stack and register variables
-   we've encountered so far. */
-struct block *innermost_block;
-
-/* The block in which the most recently discovered symbol was found. */
-struct block *block_found;
-
-/* Number of arguments seen so far in innermost function call.  */
-static int arglist_len;
-
-/* Data structure for saving values of arglist_len
-   for function calls whose arguments contain other function calls.  */
-
-struct funcall
-  {
-    struct funcall *next;
-    int arglist_len;
-  };
-
-struct funcall *funcall_chain;
-
-/* This kind of datum is used to represent the name
-   of a symbol token.  */
-
-struct stoken
-  {
-    char *ptr;
-    int length;
-  };
-
-struct ttype
-  {
-    struct stoken stoken;
-    struct type *type;
-  };
-
-struct symtoken
-  {
-    struct stoken stoken;
-    struct symbol *sym;
-    int is_a_field_of_this;
-  };
-
-/* For parsing of complicated types.
-   An array should be preceded in the list by the size of the array.  */
-enum type_pieces
-  {tp_end = -1, tp_pointer, tp_reference, tp_array, tp_function};
-/* The stack can contain either an enum type_pieces or an int.  */
-union type_stack_elt {
-  enum type_pieces piece;
-  int int_val;
-};
-static union type_stack_elt *type_stack;
-static int type_stack_depth, type_stack_size;
-
-static void push_type ();
-static void push_type_int ();
-static enum type_pieces pop_type ();
-static int pop_type_int ();
-
-/* Allow debugging of parsing.  */
-#define YYDEBUG 1
-
-#line 132 "./expread.y"
-typedef union
-  {
-    LONGEST lval;
-    unsigned LONGEST ulval;
-    double dval;
-    struct symbol *sym;
-    struct type *tval;
-    struct stoken sval;
-    struct ttype tsym;
-    struct symtoken ssym;
-    int voidval;
-    struct block *bval;
-    enum exp_opcode opcode;
-    struct internalvar *ivar;
-
-    struct type **tvec;
-    int *ivec;
-  } YYSTYPE;
-
-#ifndef YYLTYPE
-typedef
-  struct yyltype
-    {
-      int timestamp;
-      int first_line;
-      int first_column;
-      int last_line;
-      int last_column;
-      char *text;
-   }
-  yyltype;
-
-#define YYLTYPE yyltype
-#endif
-
-#include <stdio.h>
-
-#ifndef __STDC__
-#define const
-#endif
-
-
-
-#define        YYFINAL         197
-#define        YYFLAG          -32768
-#define        YYNTBASE        66
-
-#define YYTRANSLATE(x) ((unsigned)(x) <= 296 ? yytranslate[x] : 84)
-
-static const char yytranslate[] = {     0,
-     2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
-     2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
-     2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
-     2,     2,    59,     2,     2,     2,    51,    37,     2,    58,
-    62,    49,    47,    29,    48,    56,    50,     2,     2,     2,
-     2,     2,     2,     2,     2,     2,     2,    65,     2,    40,
-    31,    41,    32,    46,     2,     2,     2,     2,     2,     2,
-     2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
-     2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
-    57,     2,    61,    36,     2,     2,     2,     2,     2,     2,
-     2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
-     2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
-     2,     2,    63,    35,    64,    60,     2,     2,     2,     2,
-     2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
-     2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
-     2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
-     2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
-     2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
-     2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
-     2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
-     2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
-     2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
-     2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
-     2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
-     2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
-     2,     2,     2,     2,     2,     1,     2,     3,     4,     5,
-     6,     7,     8,     9,    10,    11,    12,    13,    14,    15,
-    16,    17,    18,    19,    20,    21,    22,    23,    24,    25,
-    26,    27,    28,    30,    33,    34,    38,    39,    42,    43,
-    44,    45,    52,    53,    54,    55
-};
-
-static const short yyprhs[] = {     0,
-     0,     2,     4,     8,    11,    14,    17,    20,    23,    26,
-    29,    32,    35,    38,    42,    47,    51,    56,    61,    62,
-    68,    69,    71,    75,    80,    85,    89,    93,    97,   101,
-   105,   109,   113,   117,   121,   125,   129,   133,   137,   141,
-   145,   149,   153,   157,   161,   165,   171,   175,   179,   181,
-   183,   185,   187,   189,   191,   193,   195,   197,   199,   204,
-   206,   208,   210,   214,   218,   222,   227,   230,   232,   234,
-   237,   239,   242,   244,   247,   249,   253,   256,   258,   261,
-   263,   266,   270,   273,   275,   279,   286,   295,   305,   307,
-   309,   311,   313,   316,   320,   323,   327,   331,   336,   339,
-   343,   346,   349,   352,   355,   357,   360,   362,   364,   366,
-   368,   370,   372,   376,   378,   380,   382,   384,   386,   388
-};
-
-static const short yyrhs[] = {    67,
-     0,    68,     0,    67,    29,    68,     0,    49,    68,     0,
-    37,    68,     0,    48,    68,     0,    59,    68,     0,    60,
-    68,     0,    53,    68,     0,    54,    68,     0,    68,    53,
-     0,    68,    54,     0,    16,    68,     0,    68,    55,    82,
-     0,    68,    55,    49,    68,     0,    68,    56,    82,     0,
-    68,    56,    49,    68,     0,    68,    57,    67,    61,     0,
-     0,    68,    58,    69,    70,    62,     0,     0,    68,     0,
-    70,    29,    68,     0,    63,    78,    64,    68,     0,    58,
-    78,    62,    68,     0,    58,    67,    62,     0,    68,    46,
-    68,     0,    68,    49,    68,     0,    68,    50,    68,     0,
-    68,    51,    68,     0,    68,    47,    68,     0,    68,    48,
-    68,     0,    68,    44,    68,     0,    68,    45,    68,     0,
-    68,    38,    68,     0,    68,    39,    68,     0,    68,    42,
-    68,     0,    68,    43,    68,     0,    68,    40,    68,     0,
-    68,    41,    68,     0,    68,    37,    68,     0,    68,    36,
-    68,     0,    68,    35,    68,     0,    68,    34,    68,     0,
-    68,    33,    68,     0,    68,    32,    68,    65,    68,     0,
-    68,    31,    68,     0,    68,    27,    68,     0,     3,     0,
-    11,     0,     5,     0,    12,     0,     4,     0,     6,     0,
-    72,     0,    24,     0,    25,     0,    26,     0,    16,    58,
-    78,    62,     0,     7,     0,    28,     0,     9,     0,    71,
-    18,    82,     0,    71,    18,    82,     0,    79,    18,    82,
-     0,    79,    18,    60,    82,     0,    18,    82,     0,    83,
-     0,    79,     0,    79,    74,     0,    49,     0,    49,    74,
-     0,    37,     0,    37,    74,     0,    75,     0,    58,    74,
-    62,     0,    75,    76,     0,    76,     0,    75,    77,     0,
-    77,     0,    57,    61,     0,    57,     3,    61,     0,    58,
-    62,     0,    73,     0,    79,    18,    49,     0,    78,    58,
-    79,    18,    49,    62,     0,    78,    58,    79,    18,    49,
-    62,    58,    62,     0,    78,    58,    79,    18,    49,    62,
-    58,    81,    62,     0,    10,     0,    23,     0,    21,     0,
-    22,     0,    21,    23,     0,    17,    21,    23,     0,    21,
-    21,     0,    21,    21,    23,     0,    17,    21,    21,     0,
-    17,    21,    21,    23,     0,    22,    23,     0,    17,    22,
-    23,     0,    13,    82,     0,    14,    82,     0,    15,    82,
-     0,    17,    80,     0,    17,     0,    20,    80,     0,    20,
-     0,    10,     0,    23,     0,    21,     0,    22,     0,    78,
-     0,    81,    29,    78,     0,     8,     0,     9,     0,    10,
-     0,    11,     0,    12,     0,     8,     0,     9,     0
-};
-
-#if YYDEBUG != 0
-static const short yyrline[] = { 0,
-   225,   229,   230,   235,   238,   241,   245,   249,   253,   257,
-   261,   265,   269,   273,   279,   283,   289,   293,   297,   301,
-   307,   310,   314,   318,   324,   330,   336,   340,   344,   348,
-   352,   356,   360,   364,   368,   372,   376,   380,   384,   388,
-   392,   396,   400,   404,   408,   412,   416,   420,   426,   436,
-   449,   461,   474,   481,   488,   491,   497,   503,   509,   516,
-   523,   530,   548,   558,   570,   583,   601,   647,   741,   742,
-   777,   779,   781,   783,   785,   788,   790,   795,   801,   803,
-   807,   809,   813,   817,   818,   820,   822,   825,   832,   834,
-   836,   838,   840,   842,   844,   846,   848,   850,   852,   854,
-   856,   859,   862,   865,   867,   869,   871,   875,   876,   882,
-   888,   897,   902,   909,   910,   911,   912,   913,   916,   917
-};
-
-static const char * const yytname[] = {   "$",
-"error","$illegal.","INT","CHAR","UINT","FLOAT","STRING","NAME","BLOCKNAME","TYPENAME",
-"NAME_OR_INT","NAME_OR_UINT","STRUCT","UNION","ENUM","SIZEOF","UNSIGNED","COLONCOLON","ERROR","SIGNED",
-"LONG","SHORT","INT_KEYWORD","LAST","REGNAME","VARIABLE","ASSIGN_MODIFY","THIS","','","ABOVE_COMMA",
-"'='","'?'","OR","AND","'|'","'^'","'&'","EQUAL","NOTEQUAL","'<'",
-"'>'","LEQ","GEQ","LSH","RSH","'@'","'+'","'-'","'*'","'/'",
-"'%'","UNARY","INCREMENT","DECREMENT","ARROW","'.'","'['","'('","'!'","'~'",
-"']'","')'","'{'","'}'","':'","start","exp1","exp","@1","arglist",
-"block","variable","ptype","abs_decl","direct_abs_decl","array_mod","func_mod","type","typebase","typename",
-"nonempty_typelist","name","name_not_typename",""
-};
-#endif
-
-static const short yyr1[] = {     0,
-    66,    67,    67,    68,    68,    68,    68,    68,    68,    68,
-    68,    68,    68,    68,    68,    68,    68,    68,    69,    68,
-    70,    70,    70,    68,    68,    68,    68,    68,    68,    68,
-    68,    68,    68,    68,    68,    68,    68,    68,    68,    68,
-    68,    68,    68,    68,    68,    68,    68,    68,    68,    68,
-    68,    68,    68,    68,    68,    68,    68,    68,    68,    68,
-    68,    71,    71,    72,    72,    72,    72,    72,    73,    73,
-    74,    74,    74,    74,    74,    75,    75,    75,    75,    75,
-    76,    76,    77,    78,    78,    78,    78,    78,    79,    79,
-    79,    79,    79,    79,    79,    79,    79,    79,    79,    79,
-    79,    79,    79,    79,    79,    79,    79,    80,    80,    80,
-    80,    81,    81,    82,    82,    82,    82,    82,    83,    83
-};
-
-static const short yyr2[] = {     0,
-     1,     1,     3,     2,     2,     2,     2,     2,     2,     2,
-     2,     2,     2,     3,     4,     3,     4,     4,     0,     5,
-     0,     1,     3,     4,     4,     3,     3,     3,     3,     3,
-     3,     3,     3,     3,     3,     3,     3,     3,     3,     3,
-     3,     3,     3,     3,     3,     5,     3,     3,     1,     1,
-     1,     1,     1,     1,     1,     1,     1,     1,     4,     1,
-     1,     1,     3,     3,     3,     4,     2,     1,     1,     2,
-     1,     2,     1,     2,     1,     3,     2,     1,     2,     1,
-     2,     3,     2,     1,     3,     6,     8,     9,     1,     1,
-     1,     1,     2,     3,     2,     3,     3,     4,     2,     3,
-     2,     2,     2,     2,     1,     2,     1,     1,     1,     1,
-     1,     1,     3,     1,     1,     1,     1,     1,     1,     1
-};
-
-static const short yydefact[] = {     0,
-    49,    53,    51,    54,    60,   119,   120,    89,    50,    52,
-     0,     0,     0,     0,   105,     0,   107,    91,    92,    90,
-    56,    57,    58,    61,     0,     0,     0,     0,     0,     0,
-     0,     0,     0,     1,     2,     0,    55,     0,    68,   114,
-   115,   116,   117,   118,   101,   102,   103,     0,    13,   108,
-   110,   111,   109,   104,    67,   110,   111,   106,    95,    93,
-    99,     5,     6,     4,     9,    10,     0,    84,     0,    69,
-     7,     8,     0,    69,     0,     0,     0,     0,     0,     0,
-     0,     0,     0,     0,     0,     0,     0,     0,     0,     0,
-     0,     0,     0,     0,     0,     0,     0,    11,    12,     0,
-     0,     0,    19,     0,     0,     0,    97,    94,   100,    96,
-    26,     0,     0,     0,    73,    71,     0,     0,    70,    75,
-    78,    80,     0,     0,     3,    48,    47,     0,    45,    44,
-    43,    42,    41,    35,    36,    39,    40,    37,    38,    33,
-    34,    27,    31,    32,    28,    29,    30,     0,    14,     0,
-    16,     0,    21,    64,     0,    65,    59,    98,     0,    25,
-    85,    74,    72,     0,    81,    83,     0,     0,    77,    79,
-    24,     0,    15,    17,    18,    22,     0,    66,     0,    82,
-    76,    46,     0,    20,     0,    23,    86,     0,    87,   112,
-     0,     0,    88,   113,     0,     0,     0
-};
-
-static const short yydefgoto[] = {   195,
-    67,    35,   153,   177,    36,    37,    68,   119,   120,   121,
-   122,    69,    38,    54,   191,   156,    39
-};
-
-static const short yypact[] = {   167,
--32768,-32768,-32768,-32768,-32768,-32768,     7,-32768,-32768,-32768,
-    22,    22,    22,   228,   190,    22,   245,   119,    -7,-32768,
--32768,-32768,-32768,-32768,   167,   167,   167,   167,   167,   167,
-   167,   167,   528,    60,   303,    33,-32768,    76,-32768,-32768,
--32768,-32768,-32768,-32768,-32768,-32768,-32768,   167,   216,-32768,
-   134,    77,-32768,-32768,-32768,-32768,-32768,-32768,    78,-32768,
--32768,   216,   216,   216,   216,   216,    59,-32768,   -52,    75,
-   216,   216,   -55,    80,   167,   167,   167,   167,   167,   167,
-   167,   167,   167,   167,   167,   167,   167,   167,   167,   167,
-   167,   167,   167,   167,   167,   167,   167,-32768,-32768,   198,
-   249,   167,-32768,    22,   138,   -34,    90,-32768,-32768,-32768,
--32768,   528,   167,    96,   165,   165,    26,   104,-32768,   -50,
--32768,-32768,   167,    47,   303,   303,   303,   268,   355,   379,
-   402,   424,   445,   464,   464,   479,   479,   479,   479,   506,
-   506,   518,   529,   529,   216,   216,   216,   167,-32768,   167,
--32768,    -2,   167,    98,    22,-32768,    32,-32768,   113,   216,
--32768,-32768,-32768,    62,-32768,-32768,    82,   106,-32768,-32768,
-   216,   167,   216,   216,-32768,   303,    68,-32768,   137,-32768,
--32768,   330,   167,-32768,   132,   303,   139,   105,-32768,   141,
-    73,   528,-32768,   141,   196,   201,-32768
-};
-
-static const short yypgoto[] = {-32768,
-     1,   -14,-32768,-32768,-32768,-32768,-32768,    36,-32768,    83,
-    85,   -29,   -28,   200,-32768,    10,-32768
-};
-
-
-#define        YYLAST          587
-
-
-static const short yytable[] = {    49,
-    34,    70,   112,    73,    74,   112,   117,   168,   123,   113,
-    62,    63,    64,    65,    66,    61,    71,    72,   106,    70,
-    45,    46,    47,   112,   -62,    55,    75,   157,   164,    40,
-    41,    42,    43,    44,     1,     2,     3,     4,     5,     6,
-     7,     8,     9,    10,    11,    12,    13,    14,    15,    16,
-   104,    17,    18,    19,    20,    21,    22,    23,   175,    24,
-   125,   126,   127,   128,   129,   130,   131,   132,   133,   134,
-   135,   136,   137,   138,   139,   140,   141,   142,   143,   144,
-   145,   146,   147,   159,    28,    29,   165,    75,    75,    30,
-    31,    32,   114,   105,    33,   161,   183,   124,   160,   109,
-   110,   192,   152,    40,    41,    42,    43,    44,   171,   149,
-   151,   115,   158,   154,     8,   -63,   115,    11,    12,    13,
-   111,    15,   180,   116,    17,    18,    19,    20,   116,   184,
-   179,   117,   118,   173,   193,   174,   117,   118,   176,    59,
-   115,    60,   160,   181,   161,    40,    41,    42,    43,    44,
-   162,   163,   116,   167,   107,   155,   108,   182,   190,    74,
-   117,   118,   194,    74,   178,   166,   189,   166,   186,     1,
-     2,     3,     4,     5,     6,     7,     8,     9,    10,    11,
-    12,    13,    14,    15,    16,   185,    17,    18,    19,    20,
-    21,    22,    23,   187,    24,   196,   188,   155,   112,    50,
-   197,   115,   169,    25,   170,    40,    41,    42,    43,    44,
-    51,    52,    53,   116,    26,    27,    58,     0,     0,    28,
-    29,   117,   118,     0,    30,    31,    32,     0,     0,    33,
-     1,     2,     3,     4,     5,     6,     7,     8,     9,    10,
-    11,    12,    13,    14,    15,    16,   148,    17,    18,    19,
-    20,    21,    22,    23,    50,    24,    40,    41,    42,    43,
-    44,     0,     0,     0,    25,    56,    57,    53,    98,    99,
-   100,   101,   102,   103,     0,    26,    27,     0,     0,     0,
-    28,    29,     0,     0,     0,    48,    31,    32,     0,     0,
-    33,     0,     0,     0,    76,     0,     0,   150,    77,    78,
-    79,    80,    81,    82,    83,    84,    85,    86,    87,    88,
-    89,    90,    91,    92,    93,    94,    95,    96,    97,     0,
-    98,    99,   100,   101,   102,   103,     0,     0,     0,    76,
-     0,     0,   172,    77,    78,    79,    80,    81,    82,    83,
-    84,    85,    86,    87,    88,    89,    90,    91,    92,    93,
-    94,    95,    96,    97,     0,    98,    99,   100,   101,   102,
-   103,    78,    79,    80,    81,    82,    83,    84,    85,    86,
-    87,    88,    89,    90,    91,    92,    93,    94,    95,    96,
-    97,     0,    98,    99,   100,   101,   102,   103,    80,    81,
-    82,    83,    84,    85,    86,    87,    88,    89,    90,    91,
-    92,    93,    94,    95,    96,    97,     0,    98,    99,   100,
-   101,   102,   103,    81,    82,    83,    84,    85,    86,    87,
-    88,    89,    90,    91,    92,    93,    94,    95,    96,    97,
-     0,    98,    99,   100,   101,   102,   103,    82,    83,    84,
-    85,    86,    87,    88,    89,    90,    91,    92,    93,    94,
-    95,    96,    97,     0,    98,    99,   100,   101,   102,   103,
-    83,    84,    85,    86,    87,    88,    89,    90,    91,    92,
-    93,    94,    95,    96,    97,     0,    98,    99,   100,   101,
-   102,   103,    84,    85,    86,    87,    88,    89,    90,    91,
-    92,    93,    94,    95,    96,    97,     0,    98,    99,   100,
-   101,   102,   103,    86,    87,    88,    89,    90,    91,    92,
-    93,    94,    95,    96,    97,     0,    98,    99,   100,   101,
-   102,   103,    90,    91,    92,    93,    94,    95,    96,    97,
-     0,    98,    99,   100,   101,   102,   103,     8,     0,     0,
-    11,    12,    13,     0,    15,     0,     0,    17,    18,    19,
-    20,    92,    93,    94,    95,    96,    97,     0,    98,    99,
-   100,   101,   102,   103,    93,    94,    95,    96,    97,     0,
-    98,    99,   100,   101,   102,   103,     0,    95,    96,    97,
-     0,    98,    99,   100,   101,   102,   103
-};
-
-static const short yycheck[] = {    14,
-     0,    30,    58,    33,    33,    58,    57,    58,    64,    62,
-    25,    26,    27,    28,    29,    23,    31,    32,    48,    48,
-    11,    12,    13,    58,    18,    16,    29,    62,     3,     8,
-     9,    10,    11,    12,     3,     4,     5,     6,     7,     8,
-     9,    10,    11,    12,    13,    14,    15,    16,    17,    18,
-    18,    20,    21,    22,    23,    24,    25,    26,    61,    28,
-    75,    76,    77,    78,    79,    80,    81,    82,    83,    84,
-    85,    86,    87,    88,    89,    90,    91,    92,    93,    94,
-    95,    96,    97,   112,    53,    54,    61,    29,    29,    58,
-    59,    60,    18,    18,    63,    49,    29,    18,   113,    23,
-    23,    29,   102,     8,     9,    10,    11,    12,   123,   100,
-   101,    37,    23,   104,    10,    18,    37,    13,    14,    15,
-    62,    17,    61,    49,    20,    21,    22,    23,    49,    62,
-    18,    57,    58,   148,    62,   150,    57,    58,   153,    21,
-    37,    23,   157,    62,    49,     8,     9,    10,    11,    12,
-   115,   116,    49,   118,    21,    60,    23,   172,   188,   188,
-    57,    58,   192,   192,   155,    62,    62,    62,   183,     3,
-     4,     5,     6,     7,     8,     9,    10,    11,    12,    13,
-    14,    15,    16,    17,    18,    49,    20,    21,    22,    23,
-    24,    25,    26,    62,    28,     0,    58,    60,    58,    10,
-     0,    37,   120,    37,   120,     8,     9,    10,    11,    12,
-    21,    22,    23,    49,    48,    49,    17,    -1,    -1,    53,
-    54,    57,    58,    -1,    58,    59,    60,    -1,    -1,    63,
-     3,     4,     5,     6,     7,     8,     9,    10,    11,    12,
-    13,    14,    15,    16,    17,    18,    49,    20,    21,    22,
-    23,    24,    25,    26,    10,    28,     8,     9,    10,    11,
-    12,    -1,    -1,    -1,    37,    21,    22,    23,    53,    54,
-    55,    56,    57,    58,    -1,    48,    49,    -1,    -1,    -1,
-    53,    54,    -1,    -1,    -1,    58,    59,    60,    -1,    -1,
-    63,    -1,    -1,    -1,    27,    -1,    -1,    49,    31,    32,
-    33,    34,    35,    36,    37,    38,    39,    40,    41,    42,
-    43,    44,    45,    46,    47,    48,    49,    50,    51,    -1,
-    53,    54,    55,    56,    57,    58,    -1,    -1,    -1,    27,
-    -1,    -1,    65,    31,    32,    33,    34,    35,    36,    37,
-    38,    39,    40,    41,    42,    43,    44,    45,    46,    47,
-    48,    49,    50,    51,    -1,    53,    54,    55,    56,    57,
-    58,    32,    33,    34,    35,    36,    37,    38,    39,    40,
-    41,    42,    43,    44,    45,    46,    47,    48,    49,    50,
-    51,    -1,    53,    54,    55,    56,    57,    58,    34,    35,
-    36,    37,    38,    39,    40,    41,    42,    43,    44,    45,
-    46,    47,    48,    49,    50,    51,    -1,    53,    54,    55,
-    56,    57,    58,    35,    36,    37,    38,    39,    40,    41,
-    42,    43,    44,    45,    46,    47,    48,    49,    50,    51,
-    -1,    53,    54,    55,    56,    57,    58,    36,    37,    38,
-    39,    40,    41,    42,    43,    44,    45,    46,    47,    48,
-    49,    50,    51,    -1,    53,    54,    55,    56,    57,    58,
-    37,    38,    39,    40,    41,    42,    43,    44,    45,    46,
-    47,    48,    49,    50,    51,    -1,    53,    54,    55,    56,
-    57,    58,    38,    39,    40,    41,    42,    43,    44,    45,
-    46,    47,    48,    49,    50,    51,    -1,    53,    54,    55,
-    56,    57,    58,    40,    41,    42,    43,    44,    45,    46,
-    47,    48,    49,    50,    51,    -1,    53,    54,    55,    56,
-    57,    58,    44,    45,    46,    47,    48,    49,    50,    51,
-    -1,    53,    54,    55,    56,    57,    58,    10,    -1,    -1,
-    13,    14,    15,    -1,    17,    -1,    -1,    20,    21,    22,
-    23,    46,    47,    48,    49,    50,    51,    -1,    53,    54,
-    55,    56,    57,    58,    47,    48,    49,    50,    51,    -1,
-    53,    54,    55,    56,    57,    58,    -1,    49,    50,    51,
-    -1,    53,    54,    55,    56,    57,    58
-};
-/* -*-C-*-  Note some compilers choke on comments on `#line' lines.  */
-#line 3 "/usr/latest/lib/bison.simple"
-
-/* Skeleton output parser for bison,
-   Copyright (C) 1984, 1989, 1990 Bob Corbett and Richard Stallman
-
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 1, or (at your option)
-   any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software
-   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-
-#ifndef alloca
-#ifdef __GNUC__
-#define alloca __builtin_alloca
-#else /* Not GNU C.  */
-#if (!defined (__STDC__) && defined (sparc)) || defined (__sparc__)
-#include <alloca.h>
-#else /* Not sparc */
-#ifdef MSDOS
-#include <malloc.h>
-#endif /* MSDOS */
-#endif /* Not sparc.  */
-#endif /* Not GNU C.  */
-#endif /* alloca not defined.  */
-
-/* This is the parser code that is written into each bison parser
-  when the %semantic_parser declaration is not specified in the grammar.
-  It was written by Richard Stallman by simplifying the hairy parser
-  used when %semantic_parser is specified.  */
-
-/* Note: there must be only one dollar sign in this file.
-   It is replaced by the list of actions, each action
-   as one case of the switch.  */
-
-#define yyerrok                (yyerrstatus = 0)
-#define yyclearin      (yychar = YYEMPTY)
-#define YYEMPTY                -2
-#define YYEOF          0
-#define YYACCEPT       return(0)
-#define YYABORT        return(1)
-#define YYERROR                goto yyerrlab1
-/* Like YYERROR except do call yyerror.
-   This remains here temporarily to ease the
-   transition to the new meaning of YYERROR, for GCC.
-   Once GCC version 2 has supplanted version 1, this can go.  */
-#define YYFAIL         goto yyerrlab
-#define YYRECOVERING()  (!!yyerrstatus)
-#define YYBACKUP(token, value) \
-do                                                             \
-  if (yychar == YYEMPTY && yylen == 1)                         \
-    { yychar = (token), yylval = (value);                      \
-      yychar1 = YYTRANSLATE (yychar);                          \
-      YYPOPSTACK;                                              \
-      goto yybackup;                                           \
-    }                                                          \
-  else                                                         \
-    { yyerror ("syntax error: cannot back up"); YYERROR; }     \
-while (0)
-
-#define YYTERROR       1
-#define YYERRCODE      256
-
-#ifndef YYPURE
-#define YYLEX          yylex()
-#endif
-
-#ifdef YYPURE
-#ifdef YYLSP_NEEDED
-#define YYLEX          yylex(&yylval, &yylloc)
-#else
-#define YYLEX          yylex(&yylval)
-#endif
-#endif
-
-/* If nonreentrant, generate the variables here */
-
-#ifndef YYPURE
-
-int    yychar;                 /*  the lookahead symbol                */
-YYSTYPE        yylval;                 /*  the semantic value of the           */
-                               /*  lookahead symbol                    */
-
-#ifdef YYLSP_NEEDED
-YYLTYPE yylloc;                        /*  location data for the lookahead     */
-                               /*  symbol                              */
-#endif
-
-int yynerrs;                   /*  number of parse errors so far       */
-#endif  /* not YYPURE */
-
-#if YYDEBUG != 0
-int yydebug;                   /*  nonzero means print parse trace     */
-/* Since this is uninitialized, it does not stop multiple parsers
-   from coexisting.  */
-#endif
-
-/*  YYINITDEPTH indicates the initial size of the parser's stacks      */
-
-#ifndef        YYINITDEPTH
-#define YYINITDEPTH 200
-#endif
-
-/*  YYMAXDEPTH is the maximum size the stacks can grow to
-    (effective only if the built-in stack extension method is used).  */
-
-#if YYMAXDEPTH == 0
-#undef YYMAXDEPTH
-#endif
-
-#ifndef YYMAXDEPTH
-#define YYMAXDEPTH 10000
-#endif
-\f
-#ifndef __cplusplus
-
-/* This is the most reliable way to avoid incompatibilities
-   in available built-in functions on various systems.  */
-static void
-__yy_bcopy (from, to, count)
-     char *from;
-     char *to;
-     int count;
-{
-  register char *f = from;
-  register char *t = to;
-  register int i = count;
-
-  while (i-- > 0)
-    *t++ = *f++;
-}
-
-#else /* __cplusplus */
-
-/* This is the most reliable way to avoid incompatibilities
-   in available built-in functions on various systems.  */
-static void
-__yy_bcopy (char *from, char *to, int count)
-{
-  register char *f = from;
-  register char *t = to;
-  register int i = count;
-
-  while (i-- > 0)
-    *t++ = *f++;
-}
-
-#endif
-\f
-#line 160 "/usr/latest/lib/bison.simple"
-int
-yyparse()
-{
-  register int yystate;
-  register int yyn;
-  register short *yyssp;
-  register YYSTYPE *yyvsp;
-  int yyerrstatus;     /*  number of tokens to shift before error messages enabled */
-  int yychar1;         /*  lookahead token as an internal (translated) token number */
-
-  short        yyssa[YYINITDEPTH];     /*  the state stack                     */
-  YYSTYPE yyvsa[YYINITDEPTH];  /*  the semantic value stack            */
-
-  short *yyss = yyssa;         /*  refer to the stacks thru separate pointers */
-  YYSTYPE *yyvs = yyvsa;       /*  to allow yyoverflow to reallocate them elsewhere */
-
-#ifdef YYLSP_NEEDED
-  YYLTYPE *yyls = yylsa;
-  YYLTYPE *yylsp;
-  YYLTYPE yylsa[YYINITDEPTH];  /*  the location stack                  */
-
-#define YYPOPSTACK   (yyvsp--, yysp--, yylsp--)
-#else
-#define YYPOPSTACK   (yyvsp--, yysp--)
-#endif
-
-  int yystacksize = YYINITDEPTH;
-
-#ifdef YYPURE
-  int yychar;
-  YYSTYPE yylval;
-  int yynerrs;
-#ifdef YYLSP_NEEDED
-  YYLTYPE yylloc;
-#endif
-#endif
-
-  YYSTYPE yyval;               /*  the variable used to return         */
-                               /*  semantic values from the action     */
-                               /*  routines                            */
-
-  int yylen;
-
-#if YYDEBUG != 0
-  if (yydebug)
-    fprintf(stderr, "Starting parse\n");
-#endif
-
-  yystate = 0;
-  yyerrstatus = 0;
-  yynerrs = 0;
-  yychar = YYEMPTY;            /* Cause a token to be read.  */
-
-  /* Initialize stack pointers.
-     Waste one element of value and location stack
-     so that they stay on the same level as the state stack.  */
-
-  yyssp = yyss - 1;
-  yyvsp = yyvs;
-#ifdef YYLSP_NEEDED
-  yylsp = yyls;
-#endif
-
-/* Push a new state, which is found in  yystate  .  */
-/* In all cases, when you get here, the value and location stacks
-   have just been pushed. so pushing a state here evens the stacks.  */
-yynewstate:
-
-  *++yyssp = yystate;
-
-  if (yyssp >= yyss + yystacksize - 1)
-    {
-      /* Give user a chance to reallocate the stack */
-      /* Use copies of these so that the &'s don't force the real ones into memory. */
-      YYSTYPE *yyvs1 = yyvs;
-      short *yyss1 = yyss;
-#ifdef YYLSP_NEEDED
-      YYLTYPE *yyls1 = yyls;
-#endif
-
-      /* Get the current used size of the three stacks, in elements.  */
-      int size = yyssp - yyss + 1;
-
-#ifdef yyoverflow
-      /* Each stack pointer address is followed by the size of
-        the data in use in that stack, in bytes.  */
-      yyoverflow("parser stack overflow",
-                &yyss1, size * sizeof (*yyssp),
-                &yyvs1, size * sizeof (*yyvsp),
-#ifdef YYLSP_NEEDED
-                &yyls1, size * sizeof (*yylsp),
-#endif
-                &yystacksize);
-
-      yyss = yyss1; yyvs = yyvs1;
-#ifdef YYLSP_NEEDED
-      yyls = yyls1;
-#endif
-#else /* no yyoverflow */
-      /* Extend the stack our own way.  */
-      if (yystacksize >= YYMAXDEPTH)
-       {
-         yyerror("parser stack overflow");
-         return 2;
-       }
-      yystacksize *= 2;
-      if (yystacksize > YYMAXDEPTH)
-       yystacksize = YYMAXDEPTH;
-      yyss = (short *) alloca (yystacksize * sizeof (*yyssp));
-      __yy_bcopy ((char *)yyss1, (char *)yyss, size * sizeof (*yyssp));
-      yyvs = (YYSTYPE *) alloca (yystacksize * sizeof (*yyvsp));
-      __yy_bcopy ((char *)yyvs1, (char *)yyvs, size * sizeof (*yyvsp));
-#ifdef YYLSP_NEEDED
-      yyls = (YYLTYPE *) alloca (yystacksize * sizeof (*yylsp));
-      __yy_bcopy ((char *)yyls1, (char *)yyls, size * sizeof (*yylsp));
-#endif
-#endif /* no yyoverflow */
-
-      yyssp = yyss + size - 1;
-      yyvsp = yyvs + size - 1;
-#ifdef YYLSP_NEEDED
-      yylsp = yyls + size - 1;
-#endif
-
-#if YYDEBUG != 0
-      if (yydebug)
-       fprintf(stderr, "Stack size increased to %d\n", yystacksize);
-#endif
-
-      if (yyssp >= yyss + yystacksize - 1)
-       YYABORT;
-    }
-
-#if YYDEBUG != 0
-  if (yydebug)
-    fprintf(stderr, "Entering state %d\n", yystate);
-#endif
-
- yybackup:
-
-/* Do appropriate processing given the current state.  */
-/* Read a lookahead token if we need one and don't already have one.  */
-/* yyresume: */
-
-  /* First try to decide what to do without reference to lookahead token.  */
-
-  yyn = yypact[yystate];
-  if (yyn == YYFLAG)
-    goto yydefault;
-
-  /* Not known => get a lookahead token if don't already have one.  */
-
-  /* yychar is either YYEMPTY or YYEOF
-     or a valid token in external form.  */
-
-  if (yychar == YYEMPTY)
-    {
-#if YYDEBUG != 0
-      if (yydebug)
-       fprintf(stderr, "Reading a token: ");
-#endif
-      yychar = YYLEX;
-    }
-
-  /* Convert token to internal form (in yychar1) for indexing tables with */
-
-  if (yychar <= 0)             /* This means end of input. */
-    {
-      yychar1 = 0;
-      yychar = YYEOF;          /* Don't call YYLEX any more */
-
-#if YYDEBUG != 0
-      if (yydebug)
-       fprintf(stderr, "Now at end of input.\n");
-#endif
-    }
-  else
-    {
-      yychar1 = YYTRANSLATE(yychar);
-
-#if YYDEBUG != 0
-      if (yydebug)
-       fprintf(stderr, "Next token is %d (%s)\n", yychar, yytname[yychar1]);
-#endif
-    }
-
-  yyn += yychar1;
-  if (yyn < 0 || yyn > YYLAST || yycheck[yyn] != yychar1)
-    goto yydefault;
-
-  yyn = yytable[yyn];
-
-  /* yyn is what to do for this token type in this state.
-     Negative => reduce, -yyn is rule number.
-     Positive => shift, yyn is new state.
-       New state is final state => don't bother to shift,
-       just return success.
-     0, or most negative number => error.  */
-
-  if (yyn < 0)
-    {
-      if (yyn == YYFLAG)
-       goto yyerrlab;
-      yyn = -yyn;
-      goto yyreduce;
-    }
-  else if (yyn == 0)
-    goto yyerrlab;
-
-  if (yyn == YYFINAL)
-    YYACCEPT;
-
-  /* Shift the lookahead token.  */
-
-#if YYDEBUG != 0
-  if (yydebug)
-    fprintf(stderr, "Shifting token %d (%s), ", yychar, yytname[yychar1]);
-#endif
-
-  /* Discard the token being shifted unless it is eof.  */
-  if (yychar != YYEOF)
-    yychar = YYEMPTY;
-
-  *++yyvsp = yylval;
-#ifdef YYLSP_NEEDED
-  *++yylsp = yylloc;
-#endif
-
-  /* count tokens shifted since error; after three, turn off error status.  */
-  if (yyerrstatus) yyerrstatus--;
-
-  yystate = yyn;
-  goto yynewstate;
-
-/* Do the default action for the current state.  */
-yydefault:
-
-  yyn = yydefact[yystate];
-  if (yyn == 0)
-    goto yyerrlab;
-
-/* Do a reduction.  yyn is the number of a rule to reduce with.  */
-yyreduce:
-  yylen = yyr2[yyn];
-  yyval = yyvsp[1-yylen]; /* implement default value of the action */
-
-#if YYDEBUG != 0
-  if (yydebug)
-    {
-      int i;
-
-      fprintf (stderr, "Reducing via rule %d (line %d), ",
-              yyn, yyrline[yyn]);
-
-      /* Print the symboles being reduced, and their result.  */
-      for (i = yyprhs[yyn]; yyrhs[i] > 0; i++)
-       fprintf (stderr, "%s ", yytname[yyrhs[i]]);
-      fprintf (stderr, " -> %s\n", yytname[yyr1[yyn]]);
-    }
-#endif
-
-
-  switch (yyn) {
-
-case 3:
-#line 231 "./expread.y"
-{ write_exp_elt_opcode (BINOP_COMMA); ;
-    break;}
-case 4:
-#line 236 "./expread.y"
-{ write_exp_elt_opcode (UNOP_IND); ;
-    break;}
-case 5:
-#line 239 "./expread.y"
-{ write_exp_elt_opcode (UNOP_ADDR); ;
-    break;}
-case 6:
-#line 242 "./expread.y"
-{ write_exp_elt_opcode (UNOP_NEG); ;
-    break;}
-case 7:
-#line 246 "./expread.y"
-{ write_exp_elt_opcode (UNOP_ZEROP); ;
-    break;}
-case 8:
-#line 250 "./expread.y"
-{ write_exp_elt_opcode (UNOP_LOGNOT); ;
-    break;}
-case 9:
-#line 254 "./expread.y"
-{ write_exp_elt_opcode (UNOP_PREINCREMENT); ;
-    break;}
-case 10:
-#line 258 "./expread.y"
-{ write_exp_elt_opcode (UNOP_PREDECREMENT); ;
-    break;}
-case 11:
-#line 262 "./expread.y"
-{ write_exp_elt_opcode (UNOP_POSTINCREMENT); ;
-    break;}
-case 12:
-#line 266 "./expread.y"
-{ write_exp_elt_opcode (UNOP_POSTDECREMENT); ;
-    break;}
-case 13:
-#line 270 "./expread.y"
-{ write_exp_elt_opcode (UNOP_SIZEOF); ;
-    break;}
-case 14:
-#line 274 "./expread.y"
-{ write_exp_elt_opcode (STRUCTOP_PTR);
-                         write_exp_string (yyvsp[0].sval);
-                         write_exp_elt_opcode (STRUCTOP_PTR); ;
-    break;}
-case 15:
-#line 280 "./expread.y"
-{ write_exp_elt_opcode (STRUCTOP_MPTR); ;
-    break;}
-case 16:
-#line 284 "./expread.y"
-{ write_exp_elt_opcode (STRUCTOP_STRUCT);
-                         write_exp_string (yyvsp[0].sval);
-                         write_exp_elt_opcode (STRUCTOP_STRUCT); ;
-    break;}
-case 17:
-#line 290 "./expread.y"
-{ write_exp_elt_opcode (STRUCTOP_MEMBER); ;
-    break;}
-case 18:
-#line 294 "./expread.y"
-{ write_exp_elt_opcode (BINOP_SUBSCRIPT); ;
-    break;}
-case 19:
-#line 300 "./expread.y"
-{ start_arglist (); ;
-    break;}
-case 20:
-#line 302 "./expread.y"
-{ write_exp_elt_opcode (OP_FUNCALL);
-                         write_exp_elt_longcst ((LONGEST) end_arglist ());
-                         write_exp_elt_opcode (OP_FUNCALL); ;
-    break;}
-case 22:
-#line 311 "./expread.y"
-{ arglist_len = 1; ;
-    break;}
-case 23:
-#line 315 "./expread.y"
-{ arglist_len++; ;
-    break;}
-case 24:
-#line 319 "./expread.y"
-{ write_exp_elt_opcode (UNOP_MEMVAL);
-                         write_exp_elt_type (yyvsp[-2].tval);
-                         write_exp_elt_opcode (UNOP_MEMVAL); ;
-    break;}
-case 25:
-#line 325 "./expread.y"
-{ write_exp_elt_opcode (UNOP_CAST);
-                         write_exp_elt_type (yyvsp[-2].tval);
-                         write_exp_elt_opcode (UNOP_CAST); ;
-    break;}
-case 26:
-#line 331 "./expread.y"
-{ ;
-    break;}
-case 27:
-#line 337 "./expread.y"
-{ write_exp_elt_opcode (BINOP_REPEAT); ;
-    break;}
-case 28:
-#line 341 "./expread.y"
-{ write_exp_elt_opcode (BINOP_MUL); ;
-    break;}
-case 29:
-#line 345 "./expread.y"
-{ write_exp_elt_opcode (BINOP_DIV); ;
-    break;}
-case 30:
-#line 349 "./expread.y"
-{ write_exp_elt_opcode (BINOP_REM); ;
-    break;}
-case 31:
-#line 353 "./expread.y"
-{ write_exp_elt_opcode (BINOP_ADD); ;
-    break;}
-case 32:
-#line 357 "./expread.y"
-{ write_exp_elt_opcode (BINOP_SUB); ;
-    break;}
-case 33:
-#line 361 "./expread.y"
-{ write_exp_elt_opcode (BINOP_LSH); ;
-    break;}
-case 34:
-#line 365 "./expread.y"
-{ write_exp_elt_opcode (BINOP_RSH); ;
-    break;}
-case 35:
-#line 369 "./expread.y"
-{ write_exp_elt_opcode (BINOP_EQUAL); ;
-    break;}
-case 36:
-#line 373 "./expread.y"
-{ write_exp_elt_opcode (BINOP_NOTEQUAL); ;
-    break;}
-case 37:
-#line 377 "./expread.y"
-{ write_exp_elt_opcode (BINOP_LEQ); ;
-    break;}
-case 38:
-#line 381 "./expread.y"
-{ write_exp_elt_opcode (BINOP_GEQ); ;
-    break;}
-case 39:
-#line 385 "./expread.y"
-{ write_exp_elt_opcode (BINOP_LESS); ;
-    break;}
-case 40:
-#line 389 "./expread.y"
-{ write_exp_elt_opcode (BINOP_GTR); ;
-    break;}
-case 41:
-#line 393 "./expread.y"
-{ write_exp_elt_opcode (BINOP_LOGAND); ;
-    break;}
-case 42:
-#line 397 "./expread.y"
-{ write_exp_elt_opcode (BINOP_LOGXOR); ;
-    break;}
-case 43:
-#line 401 "./expread.y"
-{ write_exp_elt_opcode (BINOP_LOGIOR); ;
-    break;}
-case 44:
-#line 405 "./expread.y"
-{ write_exp_elt_opcode (BINOP_AND); ;
-    break;}
-case 45:
-#line 409 "./expread.y"
-{ write_exp_elt_opcode (BINOP_OR); ;
-    break;}
-case 46:
-#line 413 "./expread.y"
-{ write_exp_elt_opcode (TERNOP_COND); ;
-    break;}
-case 47:
-#line 417 "./expread.y"
-{ write_exp_elt_opcode (BINOP_ASSIGN); ;
-    break;}
-case 48:
-#line 421 "./expread.y"
-{ write_exp_elt_opcode (BINOP_ASSIGN_MODIFY);
-                         write_exp_elt_opcode (yyvsp[-1].opcode);
-                         write_exp_elt_opcode (BINOP_ASSIGN_MODIFY); ;
-    break;}
-case 49:
-#line 427 "./expread.y"
-{ write_exp_elt_opcode (OP_LONG);
-                         if (yyvsp[0].lval == (int) yyvsp[0].lval || yyvsp[0].lval == (unsigned int) yyvsp[0].lval)
-                           write_exp_elt_type (builtin_type_int);
-                         else
-                           write_exp_elt_type (BUILTIN_TYPE_LONGEST);
-                         write_exp_elt_longcst ((LONGEST) yyvsp[0].lval);
-                         write_exp_elt_opcode (OP_LONG); ;
-    break;}
-case 50:
-#line 437 "./expread.y"
-{ YYSTYPE val;
-                         parse_number (yyvsp[0].ssym.stoken.ptr, yyvsp[0].ssym.stoken.length, 0, &val);
-                         write_exp_elt_opcode (OP_LONG);
-                         if (val.lval == (int) val.lval ||
-                             val.lval == (unsigned int) val.lval)
-                           write_exp_elt_type (builtin_type_int);
-                         else
-                           write_exp_elt_type (BUILTIN_TYPE_LONGEST);
-                         write_exp_elt_longcst (val.lval);
-                         write_exp_elt_opcode (OP_LONG); ;
-    break;}
-case 51:
-#line 450 "./expread.y"
-{
-                         write_exp_elt_opcode (OP_LONG);
-                         if (yyvsp[0].ulval == (unsigned int) yyvsp[0].ulval)
-                           write_exp_elt_type (builtin_type_unsigned_int);
-                         else
-                           write_exp_elt_type (BUILTIN_TYPE_UNSIGNED_LONGEST);
-                         write_exp_elt_longcst ((LONGEST) yyvsp[0].ulval);
-                         write_exp_elt_opcode (OP_LONG);
-                       ;
-    break;}
-case 52:
-#line 462 "./expread.y"
-{ YYSTYPE val;
-                         parse_number (yyvsp[0].ssym.stoken.ptr, yyvsp[0].ssym.stoken.length, 0, &val);
-                         write_exp_elt_opcode (OP_LONG);
-                         if (val.ulval == (unsigned int) val.ulval)
-                           write_exp_elt_type (builtin_type_unsigned_int);
-                         else
-                           write_exp_elt_type (BUILTIN_TYPE_UNSIGNED_LONGEST);
-                         write_exp_elt_longcst ((LONGEST)val.ulval);
-                         write_exp_elt_opcode (OP_LONG);
-                       ;
-    break;}
-case 53:
-#line 475 "./expread.y"
-{ write_exp_elt_opcode (OP_LONG);
-                         write_exp_elt_type (builtin_type_char);
-                         write_exp_elt_longcst ((LONGEST) yyvsp[0].lval);
-                         write_exp_elt_opcode (OP_LONG); ;
-    break;}
-case 54:
-#line 482 "./expread.y"
-{ write_exp_elt_opcode (OP_DOUBLE);
-                         write_exp_elt_type (builtin_type_double);
-                         write_exp_elt_dblcst (yyvsp[0].dval);
-                         write_exp_elt_opcode (OP_DOUBLE); ;
-    break;}
-case 56:
-#line 492 "./expread.y"
-{ write_exp_elt_opcode (OP_LAST);
-                         write_exp_elt_longcst ((LONGEST) yyvsp[0].lval);
-                         write_exp_elt_opcode (OP_LAST); ;
-    break;}
-case 57:
-#line 498 "./expread.y"
-{ write_exp_elt_opcode (OP_REGISTER);
-                         write_exp_elt_longcst ((LONGEST) yyvsp[0].lval);
-                         write_exp_elt_opcode (OP_REGISTER); ;
-    break;}
-case 58:
-#line 504 "./expread.y"
-{ write_exp_elt_opcode (OP_INTERNALVAR);
-                         write_exp_elt_intern (yyvsp[0].ivar);
-                         write_exp_elt_opcode (OP_INTERNALVAR); ;
-    break;}
-case 59:
-#line 510 "./expread.y"
-{ write_exp_elt_opcode (OP_LONG);
-                         write_exp_elt_type (builtin_type_int);
-                         write_exp_elt_longcst ((LONGEST) TYPE_LENGTH (yyvsp[-1].tval));
-                         write_exp_elt_opcode (OP_LONG); ;
-    break;}
-case 60:
-#line 517 "./expread.y"
-{ write_exp_elt_opcode (OP_STRING);
-                         write_exp_string (yyvsp[0].sval);
-                         write_exp_elt_opcode (OP_STRING); ;
-    break;}
-case 61:
-#line 524 "./expread.y"
-{ write_exp_elt_opcode (OP_THIS);
-                         write_exp_elt_opcode (OP_THIS); ;
-    break;}
-case 62:
-#line 531 "./expread.y"
-{
-                         if (yyvsp[0].ssym.sym != 0)
-                             yyval.bval = SYMBOL_BLOCK_VALUE (yyvsp[0].ssym.sym);
-                         else
-                           {
-                             struct symtab *tem =
-                                 lookup_symtab (copy_name (yyvsp[0].ssym.stoken));
-                             if (tem)
-                               yyval.bval = BLOCKVECTOR_BLOCK
-                                        (BLOCKVECTOR (tem), STATIC_BLOCK);
-                             else
-                               error ("No file or function \"%s\".",
-                                      copy_name (yyvsp[0].ssym.stoken));
-                           }
-                       ;
-    break;}
-case 63:
-#line 549 "./expread.y"
-{ struct symbol *tem
-                           = lookup_symbol (copy_name (yyvsp[0].sval), yyvsp[-2].bval,
-                                            VAR_NAMESPACE, 0, NULL);
-                         if (!tem || SYMBOL_CLASS (tem) != LOC_BLOCK)
-                           error ("No function \"%s\" in specified context.",
-                                  copy_name (yyvsp[0].sval));
-                         yyval.bval = SYMBOL_BLOCK_VALUE (tem); ;
-    break;}
-case 64:
-#line 559 "./expread.y"
-{ struct symbol *sym;
-                         sym = lookup_symbol (copy_name (yyvsp[0].sval), yyvsp[-2].bval,
-                                              VAR_NAMESPACE, 0, NULL);
-                         if (sym == 0)
-                           error ("No symbol \"%s\" in specified context.",
-                                  copy_name (yyvsp[0].sval));
-                         write_exp_elt_opcode (OP_VAR_VALUE);
-                         write_exp_elt_sym (sym);
-                         write_exp_elt_opcode (OP_VAR_VALUE); ;
-    break;}
-case 65:
-#line 571 "./expread.y"
-{
-                         struct type *type = yyvsp[-2].tval;
-                         if (TYPE_CODE (type) != TYPE_CODE_STRUCT
-                             && TYPE_CODE (type) != TYPE_CODE_UNION)
-                           error ("`%s' is not defined as an aggregate type.",
-                                  TYPE_NAME (type));
-
-                         write_exp_elt_opcode (OP_SCOPE);
-                         write_exp_elt_type (type);
-                         write_exp_string (yyvsp[0].sval);
-                         write_exp_elt_opcode (OP_SCOPE);
-                       ;
-    break;}
-case 66:
-#line 584 "./expread.y"
-{
-                         struct type *type = yyvsp[-3].tval;
-                         if (TYPE_CODE (type) != TYPE_CODE_STRUCT
-                             && TYPE_CODE (type) != TYPE_CODE_UNION)
-                           error ("`%s' is not defined as an aggregate type.",
-                                  TYPE_NAME (type));
-
-                         if (strcmp (type_name_no_tag (type), yyvsp[0].sval.ptr))
-                           error ("invalid destructor `%s::~%s'",
-                                  type_name_no_tag (type), yyvsp[0].sval.ptr);
-
-                         write_exp_elt_opcode (OP_SCOPE);
-                         write_exp_elt_type (type);
-                         write_exp_string (yyvsp[0].sval);
-                         write_exp_elt_opcode (OP_SCOPE);
-                         write_exp_elt_opcode (UNOP_LOGNOT);
-                       ;
-    break;}
-case 67:
-#line 602 "./expread.y"
-{
-                         char *name = copy_name (yyvsp[0].sval);
-                         struct symbol *sym;
-                         int i;
-
-                         sym =
-                           lookup_symbol (name, 0, VAR_NAMESPACE, 0, NULL);
-                         if (sym)
-                           {
-                             write_exp_elt_opcode (OP_VAR_VALUE);
-                             write_exp_elt_sym (sym);
-                             write_exp_elt_opcode (OP_VAR_VALUE);
-                             break;
-                           }
-                         for (i = 0; i < misc_function_count; i++)
-                           if (!strcmp (misc_function_vector[i].name, name))
-                             break;
-
-                         if (i < misc_function_count)
-                           {
-                             enum misc_function_type mft =
-                                 misc_function_vector[i].type;
-                             
-                             write_exp_elt_opcode (OP_LONG);
-                             write_exp_elt_type (builtin_type_int);
-                             write_exp_elt_longcst ((LONGEST) misc_function_vector[i].address);
-                             write_exp_elt_opcode (OP_LONG);
-                             write_exp_elt_opcode (UNOP_MEMVAL);
-                             if (mft == mf_data || mft == mf_bss)
-                               write_exp_elt_type (builtin_type_int);
-                             else if (mft == mf_text)
-                               write_exp_elt_type (lookup_function_type (builtin_type_int));
-                             else
-                               write_exp_elt_type (builtin_type_char);
-                             write_exp_elt_opcode (UNOP_MEMVAL);
-                           }
-                         else
-                           if (symtab_list == 0
-                               && partial_symtab_list == 0)
-                             error ("No symbol table is loaded.  Use the \"file\" command.");
-                           else
-                             error ("No symbol \"%s\" in current context.", name);
-                       ;
-    break;}
-case 68:
-#line 648 "./expread.y"
-{ struct symbol *sym = yyvsp[0].ssym.sym;
-
-                         if (sym)
-                           {
-                             switch (sym->class)
-                               {
-                               case LOC_REGISTER:
-                               case LOC_ARG:
-                               case LOC_REF_ARG:
-                               case LOC_REGPARM:
-                               case LOC_LOCAL:
-                               case LOC_LOCAL_ARG:
-                                 if (innermost_block == 0 ||
-                                     contained_in (block_found, 
-                                                   innermost_block))
-                                   innermost_block = block_found;
-                               case LOC_UNDEF:
-                               case LOC_CONST:
-                               case LOC_STATIC:
-                               case LOC_TYPEDEF:
-                               case LOC_LABEL:
-                               case LOC_BLOCK:
-                               case LOC_CONST_BYTES:
-
-                                 /* In this case the expression can
-                                    be evaluated regardless of what
-                                    frame we are in, so there is no
-                                    need to check for the
-                                    innermost_block.  These cases are
-                                    listed so that gcc -Wall will
-                                    report types that may not have
-                                    been considered.  */
-
-                                 break;
-                               }
-                             write_exp_elt_opcode (OP_VAR_VALUE);
-                             write_exp_elt_sym (sym);
-                             write_exp_elt_opcode (OP_VAR_VALUE);
-                           }
-                         else if (yyvsp[0].ssym.is_a_field_of_this)
-                           {
-                             /* C++: it hangs off of `this'.  Must
-                                not inadvertently convert from a method call
-                                to data ref.  */
-                             if (innermost_block == 0 || 
-                                 contained_in (block_found, innermost_block))
-                               innermost_block = block_found;
-                             write_exp_elt_opcode (OP_THIS);
-                             write_exp_elt_opcode (OP_THIS);
-                             write_exp_elt_opcode (STRUCTOP_PTR);
-                             write_exp_string (yyvsp[0].ssym.stoken);
-                             write_exp_elt_opcode (STRUCTOP_PTR);
-                           }
-                         else
-                           {
-                             register int i;
-                             register char *arg = copy_name (yyvsp[0].ssym.stoken);
-
-                               /* FIXME, this search is linear!  At least
-                                  optimize the strcmp with a 1-char cmp... */
-                             for (i = 0; i < misc_function_count; i++)
-                               if (!strcmp (misc_function_vector[i].name, arg))
-                                 break;
-
-                             if (i < misc_function_count)
-                               {
-                                 enum misc_function_type mft =
-                                     misc_function_vector[i].type;
-                                 
-                                 write_exp_elt_opcode (OP_LONG);
-                                 write_exp_elt_type (builtin_type_int);
-                                 write_exp_elt_longcst ((LONGEST) misc_function_vector[i].address);
-                                 write_exp_elt_opcode (OP_LONG);
-                                 write_exp_elt_opcode (UNOP_MEMVAL);
-                                 if (mft == mf_data || mft == mf_bss)
-                                   write_exp_elt_type (builtin_type_int);
-                                 else if (mft == mf_text)
-                                   write_exp_elt_type (lookup_function_type (builtin_type_int));
-                                 else
-                                   write_exp_elt_type (builtin_type_char);
-                                 write_exp_elt_opcode (UNOP_MEMVAL);
-                               }
-                             else if (symtab_list == 0
-                                      && partial_symtab_list == 0)
-                               error ("No symbol table is loaded.  Use the \"file\" command.");
-                             else
-                               error ("No symbol \"%s\" in current context.",
-                                      copy_name (yyvsp[0].ssym.stoken));
-                           }
-                       ;
-    break;}
-case 70:
-#line 743 "./expread.y"
-{
-                 /* This is where the interesting stuff happens.  */
-                 int done = 0;
-                 int array_size;
-                 struct type *follow_type = yyvsp[-1].tval;
-                 
-                 while (!done)
-                   switch (pop_type ())
-                     {
-                     case tp_end:
-                       done = 1;
-                       break;
-                     case tp_pointer:
-                       follow_type = lookup_pointer_type (follow_type);
-                       break;
-                     case tp_reference:
-                       follow_type = lookup_reference_type (follow_type);
-                       break;
-                     case tp_array:
-                       array_size = pop_type_int ();
-                       if (array_size != -1)
-                         follow_type = create_array_type (follow_type,
-                                                          array_size);
-                       else
-                         follow_type = lookup_pointer_type (follow_type);
-                       break;
-                     case tp_function:
-                       follow_type = lookup_function_type (follow_type);
-                       break;
-                     }
-                 yyval.tval = follow_type;
-               ;
-    break;}
-case 71:
-#line 778 "./expread.y"
-{ push_type (tp_pointer); yyval.voidval = 0; ;
-    break;}
-case 72:
-#line 780 "./expread.y"
-{ push_type (tp_pointer); yyval.voidval = yyvsp[0].voidval; ;
-    break;}
-case 73:
-#line 782 "./expread.y"
-{ push_type (tp_reference); yyval.voidval = 0; ;
-    break;}
-case 74:
-#line 784 "./expread.y"
-{ push_type (tp_reference); yyval.voidval = yyvsp[0].voidval; ;
-    break;}
-case 76:
-#line 789 "./expread.y"
-{ yyval.voidval = yyvsp[-1].voidval; ;
-    break;}
-case 77:
-#line 791 "./expread.y"
-{
-                         push_type_int (yyvsp[0].lval);
-                         push_type (tp_array);
-                       ;
-    break;}
-case 78:
-#line 796 "./expread.y"
-{
-                         push_type_int (yyvsp[0].lval);
-                         push_type (tp_array);
-                         yyval.voidval = 0;
-                       ;
-    break;}
-case 79:
-#line 802 "./expread.y"
-{ push_type (tp_function); ;
-    break;}
-case 80:
-#line 804 "./expread.y"
-{ push_type (tp_function); ;
-    break;}
-case 81:
-#line 808 "./expread.y"
-{ yyval.lval = -1; ;
-    break;}
-case 82:
-#line 810 "./expread.y"
-{ yyval.lval = yyvsp[-1].lval; ;
-    break;}
-case 83:
-#line 814 "./expread.y"
-{ yyval.voidval = 0; ;
-    break;}
-case 85:
-#line 819 "./expread.y"
-{ yyval.tval = lookup_member_type (builtin_type_int, yyvsp[-2].tval); ;
-    break;}
-case 86:
-#line 821 "./expread.y"
-{ yyval.tval = lookup_member_type (yyvsp[-5].tval, yyvsp[-3].tval); ;
-    break;}
-case 87:
-#line 823 "./expread.y"
-{ yyval.tval = lookup_member_type
-                           (lookup_function_type (yyvsp[-7].tval), yyvsp[-5].tval); ;
-    break;}
-case 88:
-#line 826 "./expread.y"
-{ yyval.tval = lookup_member_type
-                           (lookup_function_type (yyvsp[-8].tval), yyvsp[-6].tval);
-                         free (yyvsp[-1].tvec); ;
-    break;}
-case 89:
-#line 833 "./expread.y"
-{ yyval.tval = yyvsp[0].tsym.type; ;
-    break;}
-case 90:
-#line 835 "./expread.y"
-{ yyval.tval = builtin_type_int; ;
-    break;}
-case 91:
-#line 837 "./expread.y"
-{ yyval.tval = builtin_type_long; ;
-    break;}
-case 92:
-#line 839 "./expread.y"
-{ yyval.tval = builtin_type_short; ;
-    break;}
-case 93:
-#line 841 "./expread.y"
-{ yyval.tval = builtin_type_long; ;
-    break;}
-case 94:
-#line 843 "./expread.y"
-{ yyval.tval = builtin_type_unsigned_long; ;
-    break;}
-case 95:
-#line 845 "./expread.y"
-{ yyval.tval = builtin_type_long_long; ;
-    break;}
-case 96:
-#line 847 "./expread.y"
-{ yyval.tval = builtin_type_long_long; ;
-    break;}
-case 97:
-#line 849 "./expread.y"
-{ yyval.tval = builtin_type_unsigned_long_long; ;
-    break;}
-case 98:
-#line 851 "./expread.y"
-{ yyval.tval = builtin_type_unsigned_long_long; ;
-    break;}
-case 99:
-#line 853 "./expread.y"
-{ yyval.tval = builtin_type_short; ;
-    break;}
-case 100:
-#line 855 "./expread.y"
-{ yyval.tval = builtin_type_unsigned_short; ;
-    break;}
-case 101:
-#line 857 "./expread.y"
-{ yyval.tval = lookup_struct (copy_name (yyvsp[0].sval),
-                                             expression_context_block); ;
-    break;}
-case 102:
-#line 860 "./expread.y"
-{ yyval.tval = lookup_union (copy_name (yyvsp[0].sval),
-                                            expression_context_block); ;
-    break;}
-case 103:
-#line 863 "./expread.y"
-{ yyval.tval = lookup_enum (copy_name (yyvsp[0].sval),
-                                           expression_context_block); ;
-    break;}
-case 104:
-#line 866 "./expread.y"
-{ yyval.tval = lookup_unsigned_typename (TYPE_NAME(yyvsp[0].tsym.type)); ;
-    break;}
-case 105:
-#line 868 "./expread.y"
-{ yyval.tval = builtin_type_unsigned_int; ;
-    break;}
-case 106:
-#line 870 "./expread.y"
-{ yyval.tval = yyvsp[0].tsym.type; ;
-    break;}
-case 107:
-#line 872 "./expread.y"
-{ yyval.tval = builtin_type_int; ;
-    break;}
-case 109:
-#line 877 "./expread.y"
-{
-                 yyval.tsym.stoken.ptr = "int";
-                 yyval.tsym.stoken.length = 3;
-                 yyval.tsym.type = builtin_type_int;
-               ;
-    break;}
-case 110:
-#line 883 "./expread.y"
-{
-                 yyval.tsym.stoken.ptr = "long";
-                 yyval.tsym.stoken.length = 4;
-                 yyval.tsym.type = builtin_type_long;
-               ;
-    break;}
-case 111:
-#line 889 "./expread.y"
-{
-                 yyval.tsym.stoken.ptr = "short";
-                 yyval.tsym.stoken.length = 5;
-                 yyval.tsym.type = builtin_type_short;
-               ;
-    break;}
-case 112:
-#line 898 "./expread.y"
-{ yyval.tvec = (struct type **)xmalloc (sizeof (struct type *) * 2);
-                 yyval.tvec[0] = (struct type *)0;
-                 yyval.tvec[1] = yyvsp[0].tval;
-               ;
-    break;}
-case 113:
-#line 903 "./expread.y"
-{ int len = sizeof (struct type *) * ++(yyvsp[-2].ivec[0]);
-                 yyval.tvec = (struct type **)xrealloc (yyvsp[-2].tvec, len);
-                 yyval.tvec[yyval.ivec[0]] = yyvsp[0].tval;
-               ;
-    break;}
-case 114:
-#line 909 "./expread.y"
-{ yyval.sval = yyvsp[0].ssym.stoken; ;
-    break;}
-case 115:
-#line 910 "./expread.y"
-{ yyval.sval = yyvsp[0].ssym.stoken; ;
-    break;}
-case 116:
-#line 911 "./expread.y"
-{ yyval.sval = yyvsp[0].tsym.stoken; ;
-    break;}
-case 117:
-#line 912 "./expread.y"
-{ yyval.sval = yyvsp[0].ssym.stoken; ;
-    break;}
-case 118:
-#line 913 "./expread.y"
-{ yyval.sval = yyvsp[0].ssym.stoken; ;
-    break;}
-}
-   /* the action file gets copied in in place of this dollarsign */
-#line 423 "/usr/latest/lib/bison.simple"
-\f
-  yyvsp -= yylen;
-  yyssp -= yylen;
-#ifdef YYLSP_NEEDED
-  yylsp -= yylen;
-#endif
-
-#if YYDEBUG != 0
-  if (yydebug)
-    {
-      short *ssp1 = yyss - 1;
-      fprintf (stderr, "state stack now");
-      while (ssp1 != yyssp)
-       fprintf (stderr, " %d", *++ssp1);
-      fprintf (stderr, "\n");
-    }
-#endif
-
-  *++yyvsp = yyval;
-
-#ifdef YYLSP_NEEDED
-  yylsp++;
-  if (yylen == 0)
-    {
-      yylsp->first_line = yylloc.first_line;
-      yylsp->first_column = yylloc.first_column;
-      yylsp->last_line = (yylsp-1)->last_line;
-      yylsp->last_column = (yylsp-1)->last_column;
-      yylsp->text = 0;
-    }
-  else
-    {
-      yylsp->last_line = (yylsp+yylen-1)->last_line;
-      yylsp->last_column = (yylsp+yylen-1)->last_column;
-    }
-#endif
-
-  /* Now "shift" the result of the reduction.
-     Determine what state that goes to,
-     based on the state we popped back to
-     and the rule number reduced by.  */
-
-  yyn = yyr1[yyn];
-
-  yystate = yypgoto[yyn - YYNTBASE] + *yyssp;
-  if (yystate >= 0 && yystate <= YYLAST && yycheck[yystate] == *yyssp)
-    yystate = yytable[yystate];
-  else
-    yystate = yydefgoto[yyn - YYNTBASE];
-
-  goto yynewstate;
-
-yyerrlab:   /* here on detecting error */
-
-  if (! yyerrstatus)
-    /* If not already recovering from an error, report this error.  */
-    {
-      ++yynerrs;
-
-#ifdef YYERROR_VERBOSE
-      yyn = yypact[yystate];
-
-      if (yyn > YYFLAG && yyn < YYLAST)
-       {
-         int size = 0;
-         char *msg;
-         int x, count;
-
-         count = 0;
-         for (x = 0; x < (sizeof(yytname) / sizeof(char *)); x++)
-           if (yycheck[x + yyn] == x)
-             size += strlen(yytname[x]) + 15, count++;
-         msg = (char *) xmalloc(size + 15);
-         strcpy(msg, "parse error");
-
-         if (count < 5)
-           {
-             count = 0;
-             for (x = 0; x < (sizeof(yytname) / sizeof(char *)); x++)
-               if (yycheck[x + yyn] == x)
-                 {
-                   strcat(msg, count == 0 ? ", expecting `" : " or `");
-                   strcat(msg, yytname[x]);
-                   strcat(msg, "'");
-                   count++;
-                 }
-           }
-         yyerror(msg);
-         free(msg);
-       }
-      else
-#endif /* YYERROR_VERBOSE */
-       yyerror("parse error");
-    }
-
-yyerrlab1:   /* here on error raised explicitly by an action */
-
-  if (yyerrstatus == 3)
-    {
-      /* if just tried and failed to reuse lookahead token after an error, discard it.  */
-
-      /* return failure if at end of input */
-      if (yychar == YYEOF)
-       YYABORT;
-
-#if YYDEBUG != 0
-      if (yydebug)
-       fprintf(stderr, "Discarding token %d (%s).\n", yychar, yytname[yychar1]);
-#endif
-
-      yychar = YYEMPTY;
-    }
-
-  /* Else will try to reuse lookahead token
-     after shifting the error token.  */
-
-  yyerrstatus = 3;             /* Each real token shifted decrements this */
-
-  goto yyerrhandle;
-
-yyerrdefault:  /* current state does not do anything special for the error token. */
-
-#if 0
-  /* This is wrong; only states that explicitly want error tokens
-     should shift them.  */
-  yyn = yydefact[yystate];  /* If its default is to accept any token, ok.  Otherwise pop it.*/
-  if (yyn) goto yydefault;
-#endif
-
-yyerrpop:   /* pop the current state because it cannot handle the error token */
-
-  if (yyssp == yyss) YYABORT;
-  yyvsp--;
-  yystate = *--yyssp;
-#ifdef YYLSP_NEEDED
-  yylsp--;
-#endif
-
-#if YYDEBUG != 0
-  if (yydebug)
-    {
-      short *ssp1 = yyss - 1;
-      fprintf (stderr, "Error: state stack now");
-      while (ssp1 != yyssp)
-       fprintf (stderr, " %d", *++ssp1);
-      fprintf (stderr, "\n");
-    }
-#endif
-
-yyerrhandle:
-
-  yyn = yypact[yystate];
-  if (yyn == YYFLAG)
-    goto yyerrdefault;
-
-  yyn += YYTERROR;
-  if (yyn < 0 || yyn > YYLAST || yycheck[yyn] != YYTERROR)
-    goto yyerrdefault;
-
-  yyn = yytable[yyn];
-  if (yyn < 0)
-    {
-      if (yyn == YYFLAG)
-       goto yyerrpop;
-      yyn = -yyn;
-      goto yyreduce;
-    }
-  else if (yyn == 0)
-    goto yyerrpop;
-
-  if (yyn == YYFINAL)
-    YYACCEPT;
-
-#if YYDEBUG != 0
-  if (yydebug)
-    fprintf(stderr, "Shifting error token, ");
-#endif
-
-  *++yyvsp = yylval;
-#ifdef YYLSP_NEEDED
-  *++yylsp = yylloc;
-#endif
-
-  yystate = yyn;
-  goto yynewstate;
-}
-#line 928 "./expread.y"
-
-\f
-/* Begin counting arguments for a function call,
-   saving the data about any containing call.  */
-
-static void
-start_arglist ()
-{
-  register struct funcall *new = (struct funcall *) xmalloc (sizeof (struct funcall));
-
-  new->next = funcall_chain;
-  new->arglist_len = arglist_len;
-  arglist_len = 0;
-  funcall_chain = new;
-}
-
-/* Return the number of arguments in a function call just terminated,
-   and restore the data for the containing function call.  */
-
-static int
-end_arglist ()
-{
-  register int val = arglist_len;
-  register struct funcall *call = funcall_chain;
-  funcall_chain = call->next;
-  arglist_len = call->arglist_len;
-  free (call);
-  return val;
-}
-
-/* Free everything in the funcall chain.
-   Used when there is an error inside parsing.  */
-
-static void
-free_funcalls ()
-{
-  register struct funcall *call, *next;
-
-  for (call = funcall_chain; call; call = next)
-    {
-      next = call->next;
-      free (call);
-    }
-}
-\f
-/* This page contains the functions for adding data to the  struct expression
-   being constructed.  */
-
-/* Add one element to the end of the expression.  */
-
-/* To avoid a bug in the Sun 4 compiler, we pass things that can fit into
-   a register through here */
-
-static void
-write_exp_elt (expelt)
-     union exp_element expelt;
-{
-  if (expout_ptr >= expout_size)
-    {
-      expout_size *= 2;
-      expout = (struct expression *) xrealloc (expout,
-                                              sizeof (struct expression)
-                                              + expout_size * sizeof (union exp_element));
-    }
-  expout->elts[expout_ptr++] = expelt;
-}
-
-static void
-write_exp_elt_opcode (expelt)
-     enum exp_opcode expelt;
-{
-  union exp_element tmp;
-
-  tmp.opcode = expelt;
-
-  write_exp_elt (tmp);
-}
-
-static void
-write_exp_elt_sym (expelt)
-     struct symbol *expelt;
-{
-  union exp_element tmp;
-
-  tmp.symbol = expelt;
-
-  write_exp_elt (tmp);
-}
-
-static void
-write_exp_elt_longcst (expelt)
-     LONGEST expelt;
-{
-  union exp_element tmp;
-
-  tmp.longconst = expelt;
-
-  write_exp_elt (tmp);
-}
-
-static void
-write_exp_elt_dblcst (expelt)
-     double expelt;
-{
-  union exp_element tmp;
-
-  tmp.doubleconst = expelt;
-
-  write_exp_elt (tmp);
-}
-
-static void
-write_exp_elt_type (expelt)
-     struct type *expelt;
-{
-  union exp_element tmp;
-
-  tmp.type = expelt;
-
-  write_exp_elt (tmp);
-}
-
-static void
-write_exp_elt_intern (expelt)
-     struct internalvar *expelt;
-{
-  union exp_element tmp;
-
-  tmp.internalvar = expelt;
-
-  write_exp_elt (tmp);
-}
-
-/* Add a string constant to the end of the expression.
-   Follow it by its length in bytes, as a separate exp_element.  */
-
-static void
-write_exp_string (str)
-     struct stoken str;
-{
-  register int len = str.length;
-  register int lenelt
-    = (len + sizeof (union exp_element)) / sizeof (union exp_element);
-
-  expout_ptr += lenelt;
-
-  if (expout_ptr >= expout_size)
-    {
-      expout_size = max (expout_size * 2, expout_ptr + 10);
-      expout = (struct expression *)
-       xrealloc (expout, (sizeof (struct expression)
-                          + (expout_size * sizeof (union exp_element))));
-    }
-  bcopy (str.ptr, (char *) &expout->elts[expout_ptr - lenelt], len);
-  ((char *) &expout->elts[expout_ptr - lenelt])[len] = 0;
-  write_exp_elt_longcst ((LONGEST) len);
-}
-\f
-/* During parsing of a C expression, the pointer to the next character
-   is in this variable.  */
-
-static char *lexptr;
-
-/* Tokens that refer to names do so with explicit pointer and length,
-   so they can share the storage that lexptr is parsing.
-
-   When it is necessary to pass a name to a function that expects
-   a null-terminated string, the substring is copied out
-   into a block of storage that namecopy points to.
-
-   namecopy is allocated once, guaranteed big enough, for each parsing.  */
-
-static char *namecopy;
-
-/* Current depth in parentheses within the expression.  */
-
-static int paren_depth;
-
-/* Nonzero means stop parsing on first comma (if not within parentheses).  */
-
-static int comma_terminates;
-
-/* Take care of parsing a number (anything that starts with a digit).
-   Set yylval and return the token type; update lexptr.
-   LEN is the number of characters in it.  */
-
-/*** Needs some error checking for the float case ***/
-
-static int
-parse_number (p, len, parsed_float, putithere)
-     register char *p;
-     register int len;
-     int parsed_float;
-     YYSTYPE *putithere;
-{
-  register LONGEST n = 0;
-  register int i;
-  register int c;
-  register int base = input_radix;
-  int unsigned_p = 0;
-
-  extern double atof ();
-
-  if (parsed_float)
-    {
-      /* It's a float since it contains a point or an exponent.  */
-      putithere->dval = atof (p);
-      return FLOAT;
-    }
-
-  /* Handle base-switching prefixes 0x, 0t, 0d, 0 */
-  if (p[0] == '0')
-    switch (p[1])
-      {
-      case 'x':
-      case 'X':
-       if (len >= 3)
-         {
-           p += 2;
-           base = 16;
-           len -= 2;
-         }
-       break;
-
-      case 't':
-      case 'T':
-      case 'd':
-      case 'D':
-       if (len >= 3)
-         {
-           p += 2;
-           base = 10;
-           len -= 2;
-         }
-       break;
-
-      default:
-       base = 8;
-       break;
-      }
-
-  while (len-- > 0)
-    {
-      c = *p++;
-      if (c >= 'A' && c <= 'Z')
-       c += 'a' - 'A';
-      if (c != 'l' && c != 'u')
-       n *= base;
-      if (c >= '0' && c <= '9')
-       n += i = c - '0';
-      else
-       {
-         if (base > 10 && c >= 'a' && c <= 'f')
-           n += i = c - 'a' + 10;
-         else if (len == 0 && c == 'l')
-           ;
-         else if (len == 0 && c == 'u')
-           unsigned_p = 1;
-         else
-           return ERROR;       /* Char not a digit */
-       }
-      if (i >= base)
-       return ERROR;           /* Invalid digit in this base */
-    }
-
-  if (unsigned_p)
-    {
-      putithere->ulval = n;
-      return UINT;
-    }
-  else
-    {
-      putithere->lval = n;
-      return INT;
-    }
-}
-
-struct token
-{
-  char *operator;
-  int token;
-  enum exp_opcode opcode;
-};
-
-const static struct token tokentab3[] =
-  {
-    {">>=", ASSIGN_MODIFY, BINOP_RSH},
-    {"<<=", ASSIGN_MODIFY, BINOP_LSH}
-  };
-
-const static struct token tokentab2[] =
-  {
-    {"+=", ASSIGN_MODIFY, BINOP_ADD},
-    {"-=", ASSIGN_MODIFY, BINOP_SUB},
-    {"*=", ASSIGN_MODIFY, BINOP_MUL},
-    {"/=", ASSIGN_MODIFY, BINOP_DIV},
-    {"%=", ASSIGN_MODIFY, BINOP_REM},
-    {"|=", ASSIGN_MODIFY, BINOP_LOGIOR},
-    {"&=", ASSIGN_MODIFY, BINOP_LOGAND},
-    {"^=", ASSIGN_MODIFY, BINOP_LOGXOR},
-    {"++", INCREMENT, BINOP_END},
-    {"--", DECREMENT, BINOP_END},
-    {"->", ARROW, BINOP_END},
-    {"&&", AND, BINOP_END},
-    {"||", OR, BINOP_END},
-    {"::", COLONCOLON, BINOP_END},
-    {"<<", LSH, BINOP_END},
-    {">>", RSH, BINOP_END},
-    {"==", EQUAL, BINOP_END},
-    {"!=", NOTEQUAL, BINOP_END},
-    {"<=", LEQ, BINOP_END},
-    {">=", GEQ, BINOP_END}
-  };
-
-/* assign machine-independent names to certain registers 
- * (unless overridden by the REGISTER_NAMES table)
- */
-struct std_regs {
-       char *name;
-       int regnum;
-} std_regs[] = {
-#ifdef PC_REGNUM
-       { "pc", PC_REGNUM },
-#endif
-#ifdef FP_REGNUM
-       { "fp", FP_REGNUM },
-#endif
-#ifdef SP_REGNUM
-       { "sp", SP_REGNUM },
-#endif
-#ifdef PS_REGNUM
-       { "ps", PS_REGNUM },
-#endif
-};
-
-#define NUM_STD_REGS (sizeof std_regs / sizeof std_regs[0])
-
-/* Read one token, getting characters through lexptr.  */
-
-static int
-yylex ()
-{
-  register int c;
-  register int namelen;
-  register unsigned i;
-  register char *tokstart;
-
- retry:
-
-  tokstart = lexptr;
-  /* See if it is a special token of length 3.  */
-  for (i = 0; i < sizeof tokentab3 / sizeof tokentab3[0]; i++)
-    if (!strncmp (tokstart, tokentab3[i].operator, 3))
-      {
-       lexptr += 3;
-       yylval.opcode = tokentab3[i].opcode;
-       return tokentab3[i].token;
-      }
-
-  /* See if it is a special token of length 2.  */
-  for (i = 0; i < sizeof tokentab2 / sizeof tokentab2[0]; i++)
-    if (!strncmp (tokstart, tokentab2[i].operator, 2))
-      {
-       lexptr += 2;
-       yylval.opcode = tokentab2[i].opcode;
-       return tokentab2[i].token;
-      }
-
-  switch (c = *tokstart)
-    {
-    case 0:
-      return 0;
-
-    case ' ':
-    case '\t':
-    case '\n':
-      lexptr++;
-      goto retry;
-
-    case '\'':
-      lexptr++;
-      c = *lexptr++;
-      if (c == '\\')
-       c = parse_escape (&lexptr);
-      yylval.lval = c;
-      c = *lexptr++;
-      if (c != '\'')
-       error ("Invalid character constant.");
-      return CHAR;
-
-    case '(':
-      paren_depth++;
-      lexptr++;
-      return c;
-
-    case ')':
-      if (paren_depth == 0)
-       return 0;
-      paren_depth--;
-      lexptr++;
-      return c;
-
-    case ',':
-      if (comma_terminates && paren_depth == 0)
-       return 0;
-      lexptr++;
-      return c;
-
-    case '.':
-      /* Might be a floating point number.  */
-      if (lexptr[1] < '0' || lexptr[1] > '9')
-       goto symbol;            /* Nope, must be a symbol. */
-      /* FALL THRU into number case.  */
-
-    case '0':
-    case '1':
-    case '2':
-    case '3':
-    case '4':
-    case '5':
-    case '6':
-    case '7':
-    case '8':
-    case '9':
-      {
-       /* It's a number.  */
-       int got_dot = 0, got_e = 0, toktype;
-       register char *p = tokstart;
-       int hex = input_radix > 10;
-
-       if (c == '0' && (p[1] == 'x' || p[1] == 'X'))
-         {
-           p += 2;
-           hex = 1;
-         }
-       else if (c == '0' && (p[1]=='t' || p[1]=='T' || p[1]=='d' || p[1]=='D'))
-         {
-           p += 2;
-           hex = 0;
-         }
-
-       for (;; ++p)
-         {
-           if (!hex && !got_e && (*p == 'e' || *p == 'E'))
-             got_dot = got_e = 1;
-           else if (!hex && !got_dot && *p == '.')
-             got_dot = 1;
-           else if (got_e && (p[-1] == 'e' || p[-1] == 'E')
-                    && (*p == '-' || *p == '+'))
-             /* This is the sign of the exponent, not the end of the
-                number.  */
-             continue;
-           /* We will take any letters or digits.  parse_number will
-              complain if past the radix, or if L or U are not final.  */
-           else if ((*p < '0' || *p > '9')
-                    && ((*p < 'a' || *p > 'z')
-                                 && (*p < 'A' || *p > 'Z')))
-             break;
-         }
-       toktype = parse_number (tokstart, p - tokstart, got_dot|got_e, &yylval);
-        if (toktype == ERROR)
-         {
-           char *err_copy = (char *) alloca (p - tokstart + 1);
-
-           bcopy (tokstart, err_copy, p - tokstart);
-           err_copy[p - tokstart] = 0;
-           error ("Invalid number \"%s\".", err_copy);
-         }
-       lexptr = p;
-       return toktype;
-      }
-
-    case '+':
-    case '-':
-    case '*':
-    case '/':
-    case '%':
-    case '|':
-    case '&':
-    case '^':
-    case '~':
-    case '!':
-    case '@':
-    case '<':
-    case '>':
-    case '[':
-    case ']':
-    case '?':
-    case ':':
-    case '=':
-    case '{':
-    case '}':
-    symbol:
-      lexptr++;
-      return c;
-
-    case '"':
-      for (namelen = 1; (c = tokstart[namelen]) != '"'; namelen++)
-       if (c == '\\')
-         {
-           c = tokstart[++namelen];
-           if (c >= '0' && c <= '9')
-             {
-               c = tokstart[++namelen];
-               if (c >= '0' && c <= '9')
-                 c = tokstart[++namelen];
-             }
-         }
-      yylval.sval.ptr = tokstart + 1;
-      yylval.sval.length = namelen - 1;
-      lexptr += namelen + 1;
-      return STRING;
-    }
-
-  if (!(c == '_' || c == '$'
-       || (c >= 'a' && c <= 'z') || (c >= 'A' && c <= 'Z')))
-    /* We must have come across a bad character (e.g. ';').  */
-    error ("Invalid character '%c' in expression.", c);
-
-  /* It's a name.  See how long it is.  */
-  namelen = 0;
-  for (c = tokstart[namelen];
-       (c == '_' || c == '$' || (c >= '0' && c <= '9')
-       || (c >= 'a' && c <= 'z') || (c >= 'A' && c <= 'Z'));
-       c = tokstart[++namelen])
-    ;
-
-  /* The token "if" terminates the expression and is NOT 
-     removed from the input stream.  */
-  if (namelen == 2 && tokstart[0] == 'i' && tokstart[1] == 'f')
-    {
-      return 0;
-    }
-
-  lexptr += namelen;
-
-  /* Handle the tokens $digits; also $ (short for $0) and $$ (short for $$1)
-     and $$digits (equivalent to $<-digits> if you could type that).
-     Make token type LAST, and put the number (the digits) in yylval.  */
-
-  if (*tokstart == '$')
-    {
-      register int negate = 0;
-      c = 1;
-      /* Double dollar means negate the number and add -1 as well.
-        Thus $$ alone means -1.  */
-      if (namelen >= 2 && tokstart[1] == '$')
-       {
-         negate = 1;
-         c = 2;
-       }
-      if (c == namelen)
-       {
-         /* Just dollars (one or two) */
-         yylval.lval = - negate;
-         return LAST;
-       }
-      /* Is the rest of the token digits?  */
-      for (; c < namelen; c++)
-       if (!(tokstart[c] >= '0' && tokstart[c] <= '9'))
-         break;
-      if (c == namelen)
-       {
-         yylval.lval = atoi (tokstart + 1 + negate);
-         if (negate)
-           yylval.lval = - yylval.lval;
-         return LAST;
-       }
-    }
-
-  /* Handle tokens that refer to machine registers:
-     $ followed by a register name.  */
-
-  if (*tokstart == '$') {
-    for (c = 0; c < NUM_REGS; c++)
-      if (namelen - 1 == strlen (reg_names[c])
-         && !strncmp (tokstart + 1, reg_names[c], namelen - 1))
-       {
-         yylval.lval = c;
-         return REGNAME;
-       }
-    for (c = 0; c < NUM_STD_REGS; c++)
-     if (namelen - 1 == strlen (std_regs[c].name)
-        && !strncmp (tokstart + 1, std_regs[c].name, namelen - 1))
-       {
-        yylval.lval = std_regs[c].regnum;
-        return REGNAME;
-       }
-  }
-  /* Catch specific keywords.  Should be done with a data structure.  */
-  switch (namelen)
-    {
-    case 8:
-      if (!strncmp (tokstart, "unsigned", 8))
-       return UNSIGNED;
-      break;
-    case 6:
-      if (!strncmp (tokstart, "struct", 6))
-       return STRUCT;
-      if (!strncmp (tokstart, "signed", 6))
-       return SIGNED;
-      if (!strncmp (tokstart, "sizeof", 6))      
-       return SIZEOF;
-      break;
-    case 5:
-      if (!strncmp (tokstart, "union", 5))
-       return UNION;
-      if (!strncmp (tokstart, "short", 5))
-       return SHORT;
-      break;
-    case 4:
-      if (!strncmp (tokstart, "enum", 4))
-       return ENUM;
-      if (!strncmp (tokstart, "long", 4))
-       return LONG;
-      if (!strncmp (tokstart, "this", 4))
-       {
-         static const char this_name[] =
-                                { CPLUS_MARKER, 't', 'h', 'i', 's', '\0' };
-
-         if (lookup_symbol (this_name, expression_context_block,
-                            VAR_NAMESPACE, 0, NULL))
-           return THIS;
-       }
-      break;
-    case 3:
-      if (!strncmp (tokstart, "int", 3))
-       return INT_KEYWORD;
-      break;
-    default:
-      break;
-    }
-
-  yylval.sval.ptr = tokstart;
-  yylval.sval.length = namelen;
-
-  /* Any other names starting in $ are debugger internal variables.  */
-
-  if (*tokstart == '$')
-    {
-      yylval.ivar =  lookup_internalvar (copy_name (yylval.sval) + 1);
-      return VARIABLE;
-    }
-
-  /* Use token-type BLOCKNAME for symbols that happen to be defined as
-     functions or symtabs.  If this is not so, then ...
-     Use token-type TYPENAME for symbols that happen to be defined
-     currently as names of types; NAME for other symbols.
-     The caller is not constrained to care about the distinction.  */
-  {
-    char *tmp = copy_name (yylval.sval);
-    struct symbol *sym;
-    int is_a_field_of_this = 0;
-    int hextype;
-
-    sym = lookup_symbol (tmp, expression_context_block,
-                        VAR_NAMESPACE, &is_a_field_of_this, NULL);
-    if ((sym && SYMBOL_CLASS (sym) == LOC_BLOCK) ||
-        lookup_partial_symtab (tmp))
-      {
-       yylval.ssym.sym = sym;
-       yylval.ssym.is_a_field_of_this = is_a_field_of_this;
-       return BLOCKNAME;
-      }
-    if (sym && SYMBOL_CLASS (sym) == LOC_TYPEDEF)
-        {
-         yylval.tsym.type = SYMBOL_TYPE (sym);
-         return TYPENAME;
-        }
-    if ((yylval.tsym.type = lookup_primitive_typename (tmp)) != 0)
-       return TYPENAME;
-
-    /* Input names that aren't symbols but ARE valid hex numbers,
-       when the input radix permits them, can be names or numbers
-       depending on the parse.  Note we support radixes > 16 here.  */
-    if (!sym && 
-        ((tokstart[0] >= 'a' && tokstart[0] < 'a' + input_radix - 10) ||
-         (tokstart[0] >= 'A' && tokstart[0] < 'A' + input_radix - 10)))
-      {
-       YYSTYPE newlval;        /* Its value is ignored.  */
-       hextype = parse_number (tokstart, namelen, 0, &newlval);
-       if (hextype == INT)
-         {
-           yylval.ssym.sym = sym;
-           yylval.ssym.is_a_field_of_this = is_a_field_of_this;
-           return NAME_OR_INT;
-         }
-       if (hextype == UINT)
-         {
-           yylval.ssym.sym = sym;
-           yylval.ssym.is_a_field_of_this = is_a_field_of_this;
-           return NAME_OR_UINT;
-         }
-      }
-
-    /* Any other kind of symbol */
-    yylval.ssym.sym = sym;
-    yylval.ssym.is_a_field_of_this = is_a_field_of_this;
-    return NAME;
-  }
-}
-
-static void
-yyerror (msg)
-     char *msg;
-{
-  error ("Invalid syntax in expression.");
-}
-
-/* Return a null-terminated temporary copy of the name
-   of a string token.  */
-
-static char *
-copy_name (token)
-     struct stoken token;
-{
-  bcopy (token.ptr, namecopy, token.length);
-  namecopy[token.length] = 0;
-  return namecopy;
-}
-\f
-/* Reverse an expression from suffix form (in which it is constructed)
-   to prefix form (in which we can conveniently print or execute it).  */
-
-static void prefixify_subexp ();
-
-static void
-prefixify_expression (expr)
-     register struct expression *expr;
-{
-  register int len = sizeof (struct expression) +
-                                   expr->nelts * sizeof (union exp_element);
-  register struct expression *temp;
-  register int inpos = expr->nelts, outpos = 0;
-
-  temp = (struct expression *) alloca (len);
-
-  /* Copy the original expression into temp.  */
-  bcopy (expr, temp, len);
-
-  prefixify_subexp (temp, expr, inpos, outpos);
-}
-
-/* Return the number of exp_elements in the subexpression of EXPR
-   whose last exp_element is at index ENDPOS - 1 in EXPR.  */
-
-static int
-length_of_subexp (expr, endpos)
-     register struct expression *expr;
-     register int endpos;
-{
-  register int oplen = 1;
-  register int args = 0;
-  register int i;
-
-  if (endpos < 0)
-    error ("?error in length_of_subexp");
-
-  i = (int) expr->elts[endpos - 1].opcode;
-
-  switch (i)
-    {
-      /* C++  */
-    case OP_SCOPE:
-      oplen = 4 + ((expr->elts[endpos - 2].longconst
-                   + sizeof (union exp_element))
-                  / sizeof (union exp_element));
-      break;
-
-    case OP_LONG:
-    case OP_DOUBLE:
-      oplen = 4;
-      break;
-
-    case OP_VAR_VALUE:
-    case OP_LAST:
-    case OP_REGISTER:
-    case OP_INTERNALVAR:
-      oplen = 3;
-      break;
-
-    case OP_FUNCALL:
-      oplen = 3;
-      args = 1 + expr->elts[endpos - 2].longconst;
-      break;
-
-    case UNOP_CAST:
-    case UNOP_MEMVAL:
-      oplen = 3;
-      args = 1;
-      break;
-
-    case STRUCTOP_STRUCT:
-    case STRUCTOP_PTR:
-      args = 1;
-    case OP_STRING:
-      oplen = 3 + ((expr->elts[endpos - 2].longconst
-                   + sizeof (union exp_element))
-                  / sizeof (union exp_element));
-      break;
-
-    case TERNOP_COND:
-      args = 3;
-      break;
-
-    case BINOP_ASSIGN_MODIFY:
-      oplen = 3;
-      args = 2;
-      break;
-
-      /* C++ */
-    case OP_THIS:
-      oplen = 2;
-      break;
-
-    default:
-      args = 1 + (i < (int) BINOP_END);
-    }
-
-  while (args > 0)
-    {
-      oplen += length_of_subexp (expr, endpos - oplen);
-      args--;
-    }
-
-  return oplen;
-}
-
-/* Copy the subexpression ending just before index INEND in INEXPR
-   into OUTEXPR, starting at index OUTBEG.
-   In the process, convert it from suffix to prefix form.  */
-
-static void
-prefixify_subexp (inexpr, outexpr, inend, outbeg)
-     register struct expression *inexpr;
-     struct expression *outexpr;
-     register int inend;
-     int outbeg;
-{
-  register int oplen = 1;
-  register int args = 0;
-  register int i;
-  int *arglens;
-  enum exp_opcode opcode;
-
-  /* Compute how long the last operation is (in OPLEN),
-     and also how many preceding subexpressions serve as
-     arguments for it (in ARGS).  */
-
-  opcode = inexpr->elts[inend - 1].opcode;
-  switch (opcode)
-    {
-      /* C++  */
-    case OP_SCOPE:
-      oplen = 4 + ((inexpr->elts[inend - 2].longconst
-                   + sizeof (union exp_element))
-                  / sizeof (union exp_element));
-      break;
-
-    case OP_LONG:
-    case OP_DOUBLE:
-      oplen = 4;
-      break;
-
-    case OP_VAR_VALUE:
-    case OP_LAST:
-    case OP_REGISTER:
-    case OP_INTERNALVAR:
-      oplen = 3;
-      break;
-
-    case OP_FUNCALL:
-      oplen = 3;
-      args = 1 + inexpr->elts[inend - 2].longconst;
-      break;
-
-    case UNOP_CAST:
-    case UNOP_MEMVAL:
-      oplen = 3;
-      args = 1;
-      break;
-
-    case STRUCTOP_STRUCT:
-    case STRUCTOP_PTR:
-      args = 1;
-    case OP_STRING:
-      oplen = 3 + ((inexpr->elts[inend - 2].longconst
-                   + sizeof (union exp_element))
-                  / sizeof (union exp_element));
-                  
-      break;
-
-    case TERNOP_COND:
-      args = 3;
-      break;
-
-    case BINOP_ASSIGN_MODIFY:
-      oplen = 3;
-      args = 2;
-      break;
-
-      /* C++ */
-    case OP_THIS:
-      oplen = 2;
-      break;
-
-    default:
-      args = 1 + ((int) opcode < (int) BINOP_END);
-    }
-
-  /* Copy the final operator itself, from the end of the input
-     to the beginning of the output.  */
-  inend -= oplen;
-  bcopy (&inexpr->elts[inend], &outexpr->elts[outbeg],
-        oplen * sizeof (union exp_element));
-  outbeg += oplen;
-
-  /* Find the lengths of the arg subexpressions.  */
-  arglens = (int *) alloca (args * sizeof (int));
-  for (i = args - 1; i >= 0; i--)
-    {
-      oplen = length_of_subexp (inexpr, inend);
-      arglens[i] = oplen;
-      inend -= oplen;
-    }
-
-  /* Now copy each subexpression, preserving the order of
-     the subexpressions, but prefixifying each one.
-     In this loop, inend starts at the beginning of
-     the expression this level is working on
-     and marches forward over the arguments.
-     outbeg does similarly in the output.  */
-  for (i = 0; i < args; i++)
-    {
-      oplen = arglens[i];
-      inend += oplen;
-      prefixify_subexp (inexpr, outexpr, inend, outbeg);
-      outbeg += oplen;
-    }
-}
-\f
-/* This page contains the two entry points to this file.  */
-
-/* Read a C expression from the string *STRINGPTR points to,
-   parse it, and return a pointer to a  struct expression  that we malloc.
-   Use block BLOCK as the lexical context for variable names;
-   if BLOCK is zero, use the block of the selected stack frame.
-   Meanwhile, advance *STRINGPTR to point after the expression,
-   at the first nonwhite character that is not part of the expression
-   (possibly a null character).
-
-   If COMMA is nonzero, stop if a comma is reached.  */
-
-struct expression *
-parse_c_1 (stringptr, block, comma)
-     char **stringptr;
-     struct block *block;
-     int comma;
-{
-  struct cleanup *old_chain;
-
-  lexptr = *stringptr;
-
-  paren_depth = 0;
-  type_stack_depth = 0;
-
-  comma_terminates = comma;
-
-  if (lexptr == 0 || *lexptr == 0)
-    error_no_arg ("expression to compute");
-
-  old_chain = make_cleanup (free_funcalls, 0);
-  funcall_chain = 0;
-
-  expression_context_block = block ? block : get_selected_block ();
-
-  namecopy = (char *) alloca (strlen (lexptr) + 1);
-  expout_size = 10;
-  expout_ptr = 0;
-  expout = (struct expression *)
-    xmalloc (sizeof (struct expression)
-            + expout_size * sizeof (union exp_element));
-  make_cleanup (free_current_contents, &expout);
-  if (yyparse ())
-    yyerror (NULL);
-  discard_cleanups (old_chain);
-  expout->nelts = expout_ptr;
-  expout = (struct expression *)
-    xrealloc (expout,
-             sizeof (struct expression)
-             + expout_ptr * sizeof (union exp_element));
-  prefixify_expression (expout);
-  *stringptr = lexptr;
-  return expout;
-}
-
-/* Parse STRING as an expression, and complain if this fails
-   to use up all of the contents of STRING.  */
-
-struct expression *
-parse_c_expression (string)
-     char *string;
-{
-  register struct expression *exp;
-  exp = parse_c_1 (&string, 0, 0);
-  if (*string)
-    error ("Junk after end of expression.");
-  return exp;
-}
-
-static void 
-push_type (tp)
-     enum type_pieces tp;
-{
-  if (type_stack_depth == type_stack_size)
-    {
-      type_stack_size *= 2;
-      type_stack = (union type_stack_elt *)
-       xrealloc (type_stack, type_stack_size * sizeof (*type_stack));
-    }
-  type_stack[type_stack_depth++].piece = tp;
-}
-
-static void
-push_type_int (n)
-     int n;
-{
-  if (type_stack_depth == type_stack_size)
-    {
-      type_stack_size *= 2;
-      type_stack = (union type_stack_elt *)
-       xrealloc (type_stack, type_stack_size * sizeof (*type_stack));
-    }
-  type_stack[type_stack_depth++].int_val = n;
-}
-
-static enum type_pieces 
-pop_type ()
-{
-  if (type_stack_depth)
-    return type_stack[--type_stack_depth].piece;
-  return tp_end;
-}
-
-static int
-pop_type_int ()
-{
-  if (type_stack_depth)
-    return type_stack[--type_stack_depth].int_val;
-  /* "Can't happen".  */
-  return 0;
-}
-
-void
-_initialize_expread ()
-{
-  type_stack_size = 80;
-  type_stack_depth = 0;
-  type_stack = (union type_stack_elt *)
-    xmalloc (type_stack_size * sizeof (*type_stack));
-}
diff --git a/gdb/expread.y b/gdb/expread.y
deleted file mode 100755 (executable)
index cc62554..0000000
+++ /dev/null
@@ -1,1989 +0,0 @@
-/* Parse C expressions for GDB.
-   Copyright (C) 1986, 1989, 1990, 1991 Free Software Foundation, Inc.
-
-This file is part of GDB.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
-\f
-/* Parse a C expression from text in a string,
-   and return the result as a  struct expression  pointer.
-   That structure contains arithmetic operations in reverse polish,
-   with constants represented by operations that are followed by special data.
-   See expression.h for the details of the format.
-   What is important here is that it can be built up sequentially
-   during the process of parsing; the lower levels of the tree always
-   come first in the result.  */
-   
-%{
-#include <stdio.h>
-#include "defs.h"
-#include "param.h"
-#include "symtab.h"
-#include "frame.h"
-#include "expression.h"
-#include "value.h"
-#include "command.h"
-
-static struct expression *expout;
-static int expout_size;
-static int expout_ptr;
-
-static int yylex ();
-static void yyerror ();
-static void write_exp_elt ();
-static void write_exp_elt_opcode ();
-static void write_exp_elt_sym ();
-static void write_exp_elt_longcst ();
-static void write_exp_elt_dblcst ();
-static void write_exp_elt_type ();
-static void write_exp_elt_intern ();
-static void write_exp_string ();
-static void start_arglist ();
-static int end_arglist ();
-static void free_funcalls ();
-static char *copy_name ();
-static int parse_number ();
-
-/* If this is nonzero, this block is used as the lexical context
-   for symbol names.  */
-
-static struct block *expression_context_block;
-
-/* The innermost context required by the stack and register variables
-   we've encountered so far. */
-struct block *innermost_block;
-
-/* The block in which the most recently discovered symbol was found. */
-struct block *block_found;
-
-/* Number of arguments seen so far in innermost function call.  */
-static int arglist_len;
-
-/* Data structure for saving values of arglist_len
-   for function calls whose arguments contain other function calls.  */
-
-struct funcall
-  {
-    struct funcall *next;
-    int arglist_len;
-  };
-
-struct funcall *funcall_chain;
-
-/* This kind of datum is used to represent the name
-   of a symbol token.  */
-
-struct stoken
-  {
-    char *ptr;
-    int length;
-  };
-
-struct ttype
-  {
-    struct stoken stoken;
-    struct type *type;
-  };
-
-struct symtoken
-  {
-    struct stoken stoken;
-    struct symbol *sym;
-    int is_a_field_of_this;
-  };
-
-/* For parsing of complicated types.
-   An array should be preceded in the list by the size of the array.  */
-enum type_pieces
-  {tp_end = -1, tp_pointer, tp_reference, tp_array, tp_function};
-/* The stack can contain either an enum type_pieces or an int.  */
-union type_stack_elt {
-  enum type_pieces piece;
-  int int_val;
-};
-static union type_stack_elt *type_stack;
-static int type_stack_depth, type_stack_size;
-
-static void push_type ();
-static void push_type_int ();
-static enum type_pieces pop_type ();
-static int pop_type_int ();
-
-/* Allow debugging of parsing.  */
-#define YYDEBUG 1
-%}
-
-/* Although the yacc "value" of an expression is not used,
-   since the result is stored in the structure being created,
-   other node types do have values.  */
-
-%union
-  {
-    LONGEST lval;
-    unsigned LONGEST ulval;
-    double dval;
-    struct symbol *sym;
-    struct type *tval;
-    struct stoken sval;
-    struct ttype tsym;
-    struct symtoken ssym;
-    int voidval;
-    struct block *bval;
-    enum exp_opcode opcode;
-    struct internalvar *ivar;
-
-    struct type **tvec;
-    int *ivec;
-  }
-
-%type <voidval> exp exp1 start variable
-%type <tval> type typebase
-%type <tvec> nonempty_typelist
-%type <bval> block
-
-/* Fancy type parsing.  */
-%type <voidval> func_mod direct_abs_decl abs_decl
-%type <tval> ptype
-%type <lval> array_mod
-
-%token <lval> INT CHAR
-%token <ulval> UINT
-%token <dval> FLOAT
-
-/* Both NAME and TYPENAME tokens represent symbols in the input,
-   and both convey their data as strings.
-   But a TYPENAME is a string that happens to be defined as a typedef
-   or builtin type name (such as int or char)
-   and a NAME is any other symbol.
-
-   Contexts where this distinction is not important can use the
-   nonterminal "name", which matches either NAME or TYPENAME.  */
-
-%token <sval> STRING
-%token <ssym> NAME BLOCKNAME
-%token <tsym> TYPENAME
-%type <sval> name
-%type <ssym> name_not_typename
-%type <tsym> typename
-
-/* A NAME_OR_INT is a symbol which is not known in the symbol table,
-   but which would parse as a valid number in the current input radix.
-   E.g. "c" when input_radix==16.  Depending on the parse, it will be
-   turned into a name or into a number.  NAME_OR_UINT ditto.  */
-
-%token <ssym> NAME_OR_INT NAME_OR_UINT
-
-%token STRUCT UNION ENUM SIZEOF UNSIGNED COLONCOLON
-%token ERROR
-
-/* Special type cases, put in to allow the parser to distinguish different
-   legal basetypes.  */
-%token SIGNED LONG SHORT INT_KEYWORD
-
-%token <lval> LAST REGNAME
-
-%token <ivar> VARIABLE
-
-%token <opcode> ASSIGN_MODIFY
-
-/* C++ */
-%token THIS
-
-%left ','
-%left ABOVE_COMMA
-%right '=' ASSIGN_MODIFY
-%right '?'
-%left OR
-%left AND
-%left '|'
-%left '^'
-%left '&'
-%left EQUAL NOTEQUAL
-%left '<' '>' LEQ GEQ
-%left LSH RSH
-%left '@'
-%left '+' '-'
-%left '*' '/' '%'
-%right UNARY INCREMENT DECREMENT
-%right ARROW '.' '[' '('
-%left COLONCOLON
-\f
-%%
-
-start   :      exp1
-       ;
-
-/* Expressions, including the comma operator.  */
-exp1   :       exp
-       |       exp1 ',' exp
-                       { write_exp_elt_opcode (BINOP_COMMA); }
-       ;
-
-/* Expressions, not including the comma operator.  */
-exp    :       '*' exp    %prec UNARY
-                       { write_exp_elt_opcode (UNOP_IND); }
-
-exp    :       '&' exp    %prec UNARY
-                       { write_exp_elt_opcode (UNOP_ADDR); }
-
-exp    :       '-' exp    %prec UNARY
-                       { write_exp_elt_opcode (UNOP_NEG); }
-       ;
-
-exp    :       '!' exp    %prec UNARY
-                       { write_exp_elt_opcode (UNOP_ZEROP); }
-       ;
-
-exp    :       '~' exp    %prec UNARY
-                       { write_exp_elt_opcode (UNOP_LOGNOT); }
-       ;
-
-exp    :       INCREMENT exp    %prec UNARY
-                       { write_exp_elt_opcode (UNOP_PREINCREMENT); }
-       ;
-
-exp    :       DECREMENT exp    %prec UNARY
-                       { write_exp_elt_opcode (UNOP_PREDECREMENT); }
-       ;
-
-exp    :       exp INCREMENT    %prec UNARY
-                       { write_exp_elt_opcode (UNOP_POSTINCREMENT); }
-       ;
-
-exp    :       exp DECREMENT    %prec UNARY
-                       { write_exp_elt_opcode (UNOP_POSTDECREMENT); }
-       ;
-
-exp    :       SIZEOF exp       %prec UNARY
-                       { write_exp_elt_opcode (UNOP_SIZEOF); }
-       ;
-
-exp    :       exp ARROW name
-                       { write_exp_elt_opcode (STRUCTOP_PTR);
-                         write_exp_string ($3);
-                         write_exp_elt_opcode (STRUCTOP_PTR); }
-       ;
-
-exp    :       exp ARROW '*' exp
-                       { write_exp_elt_opcode (STRUCTOP_MPTR); }
-       ;
-
-exp    :       exp '.' name
-                       { write_exp_elt_opcode (STRUCTOP_STRUCT);
-                         write_exp_string ($3);
-                         write_exp_elt_opcode (STRUCTOP_STRUCT); }
-       ;
-
-exp    :       exp '.' '*' exp
-                       { write_exp_elt_opcode (STRUCTOP_MEMBER); }
-       ;
-
-exp    :       exp '[' exp1 ']'
-                       { write_exp_elt_opcode (BINOP_SUBSCRIPT); }
-       ;
-
-exp    :       exp '(' 
-                       /* This is to save the value of arglist_len
-                          being accumulated by an outer function call.  */
-                       { start_arglist (); }
-               arglist ')'     %prec ARROW
-                       { write_exp_elt_opcode (OP_FUNCALL);
-                         write_exp_elt_longcst ((LONGEST) end_arglist ());
-                         write_exp_elt_opcode (OP_FUNCALL); }
-       ;
-
-arglist        :
-       ;
-
-arglist        :       exp
-                       { arglist_len = 1; }
-       ;
-
-arglist        :       arglist ',' exp   %prec ABOVE_COMMA
-                       { arglist_len++; }
-       ;
-
-exp    :       '{' type '}' exp  %prec UNARY
-                       { write_exp_elt_opcode (UNOP_MEMVAL);
-                         write_exp_elt_type ($2);
-                         write_exp_elt_opcode (UNOP_MEMVAL); }
-       ;
-
-exp    :       '(' type ')' exp  %prec UNARY
-                       { write_exp_elt_opcode (UNOP_CAST);
-                         write_exp_elt_type ($2);
-                         write_exp_elt_opcode (UNOP_CAST); }
-       ;
-
-exp    :       '(' exp1 ')'
-                       { }
-       ;
-
-/* Binary operators in order of decreasing precedence.  */
-
-exp    :       exp '@' exp
-                       { write_exp_elt_opcode (BINOP_REPEAT); }
-       ;
-
-exp    :       exp '*' exp
-                       { write_exp_elt_opcode (BINOP_MUL); }
-       ;
-
-exp    :       exp '/' exp
-                       { write_exp_elt_opcode (BINOP_DIV); }
-       ;
-
-exp    :       exp '%' exp
-                       { write_exp_elt_opcode (BINOP_REM); }
-       ;
-
-exp    :       exp '+' exp
-                       { write_exp_elt_opcode (BINOP_ADD); }
-       ;
-
-exp    :       exp '-' exp
-                       { write_exp_elt_opcode (BINOP_SUB); }
-       ;
-
-exp    :       exp LSH exp
-                       { write_exp_elt_opcode (BINOP_LSH); }
-       ;
-
-exp    :       exp RSH exp
-                       { write_exp_elt_opcode (BINOP_RSH); }
-       ;
-
-exp    :       exp EQUAL exp
-                       { write_exp_elt_opcode (BINOP_EQUAL); }
-       ;
-
-exp    :       exp NOTEQUAL exp
-                       { write_exp_elt_opcode (BINOP_NOTEQUAL); }
-       ;
-
-exp    :       exp LEQ exp
-                       { write_exp_elt_opcode (BINOP_LEQ); }
-       ;
-
-exp    :       exp GEQ exp
-                       { write_exp_elt_opcode (BINOP_GEQ); }
-       ;
-
-exp    :       exp '<' exp
-                       { write_exp_elt_opcode (BINOP_LESS); }
-       ;
-
-exp    :       exp '>' exp
-                       { write_exp_elt_opcode (BINOP_GTR); }
-       ;
-
-exp    :       exp '&' exp
-                       { write_exp_elt_opcode (BINOP_LOGAND); }
-       ;
-
-exp    :       exp '^' exp
-                       { write_exp_elt_opcode (BINOP_LOGXOR); }
-       ;
-
-exp    :       exp '|' exp
-                       { write_exp_elt_opcode (BINOP_LOGIOR); }
-       ;
-
-exp    :       exp AND exp
-                       { write_exp_elt_opcode (BINOP_AND); }
-       ;
-
-exp    :       exp OR exp
-                       { write_exp_elt_opcode (BINOP_OR); }
-       ;
-
-exp    :       exp '?' exp ':' exp     %prec '?'
-                       { write_exp_elt_opcode (TERNOP_COND); }
-       ;
-                         
-exp    :       exp '=' exp
-                       { write_exp_elt_opcode (BINOP_ASSIGN); }
-       ;
-
-exp    :       exp ASSIGN_MODIFY exp
-                       { write_exp_elt_opcode (BINOP_ASSIGN_MODIFY);
-                         write_exp_elt_opcode ($2);
-                         write_exp_elt_opcode (BINOP_ASSIGN_MODIFY); }
-       ;
-
-exp    :       INT
-                       { write_exp_elt_opcode (OP_LONG);
-                         if ($1 == (int) $1 || $1 == (unsigned int) $1)
-                           write_exp_elt_type (builtin_type_int);
-                         else
-                           write_exp_elt_type (BUILTIN_TYPE_LONGEST);
-                         write_exp_elt_longcst ((LONGEST) $1);
-                         write_exp_elt_opcode (OP_LONG); }
-       ;
-
-exp    :       NAME_OR_INT
-                       { YYSTYPE val;
-                         parse_number ($1.stoken.ptr, $1.stoken.length, 0, &val);
-                         write_exp_elt_opcode (OP_LONG);
-                         if (val.lval == (int) val.lval ||
-                             val.lval == (unsigned int) val.lval)
-                           write_exp_elt_type (builtin_type_int);
-                         else
-                           write_exp_elt_type (BUILTIN_TYPE_LONGEST);
-                         write_exp_elt_longcst (val.lval);
-                         write_exp_elt_opcode (OP_LONG); }
-       ;
-
-exp    :       UINT
-                       {
-                         write_exp_elt_opcode (OP_LONG);
-                         if ($1 == (unsigned int) $1)
-                           write_exp_elt_type (builtin_type_unsigned_int);
-                         else
-                           write_exp_elt_type (BUILTIN_TYPE_UNSIGNED_LONGEST);
-                         write_exp_elt_longcst ((LONGEST) $1);
-                         write_exp_elt_opcode (OP_LONG);
-                       }
-       ;
-
-exp    :       NAME_OR_UINT
-                       { YYSTYPE val;
-                         parse_number ($1.stoken.ptr, $1.stoken.length, 0, &val);
-                         write_exp_elt_opcode (OP_LONG);
-                         if (val.ulval == (unsigned int) val.ulval)
-                           write_exp_elt_type (builtin_type_unsigned_int);
-                         else
-                           write_exp_elt_type (BUILTIN_TYPE_UNSIGNED_LONGEST);
-                         write_exp_elt_longcst ((LONGEST)val.ulval);
-                         write_exp_elt_opcode (OP_LONG);
-                       }
-       ;
-
-exp    :       CHAR
-                       { write_exp_elt_opcode (OP_LONG);
-                         write_exp_elt_type (builtin_type_char);
-                         write_exp_elt_longcst ((LONGEST) $1);
-                         write_exp_elt_opcode (OP_LONG); }
-       ;
-
-exp    :       FLOAT
-                       { write_exp_elt_opcode (OP_DOUBLE);
-                         write_exp_elt_type (builtin_type_double);
-                         write_exp_elt_dblcst ($1);
-                         write_exp_elt_opcode (OP_DOUBLE); }
-       ;
-
-exp    :       variable
-       ;
-
-exp    :       LAST
-                       { write_exp_elt_opcode (OP_LAST);
-                         write_exp_elt_longcst ((LONGEST) $1);
-                         write_exp_elt_opcode (OP_LAST); }
-       ;
-
-exp    :       REGNAME
-                       { write_exp_elt_opcode (OP_REGISTER);
-                         write_exp_elt_longcst ((LONGEST) $1);
-                         write_exp_elt_opcode (OP_REGISTER); }
-       ;
-
-exp    :       VARIABLE
-                       { write_exp_elt_opcode (OP_INTERNALVAR);
-                         write_exp_elt_intern ($1);
-                         write_exp_elt_opcode (OP_INTERNALVAR); }
-       ;
-
-exp    :       SIZEOF '(' type ')'     %prec UNARY
-                       { write_exp_elt_opcode (OP_LONG);
-                         write_exp_elt_type (builtin_type_int);
-                         write_exp_elt_longcst ((LONGEST) TYPE_LENGTH ($3));
-                         write_exp_elt_opcode (OP_LONG); }
-       ;
-
-exp    :       STRING
-                       { write_exp_elt_opcode (OP_STRING);
-                         write_exp_string ($1);
-                         write_exp_elt_opcode (OP_STRING); }
-       ;
-
-/* C++.  */
-exp    :       THIS
-                       { write_exp_elt_opcode (OP_THIS);
-                         write_exp_elt_opcode (OP_THIS); }
-       ;
-
-/* end of C++.  */
-
-block  :       BLOCKNAME
-                       {
-                         if ($1.sym != 0)
-                             $$ = SYMBOL_BLOCK_VALUE ($1.sym);
-                         else
-                           {
-                             struct symtab *tem =
-                                 lookup_symtab (copy_name ($1.stoken));
-                             if (tem)
-                               $$ = BLOCKVECTOR_BLOCK
-                                        (BLOCKVECTOR (tem), STATIC_BLOCK);
-                             else
-                               error ("No file or function \"%s\".",
-                                      copy_name ($1.stoken));
-                           }
-                       }
-       ;
-
-block  :       block COLONCOLON name
-                       { struct symbol *tem
-                           = lookup_symbol (copy_name ($3), $1,
-                                            VAR_NAMESPACE, 0, NULL);
-                         if (!tem || SYMBOL_CLASS (tem) != LOC_BLOCK)
-                           error ("No function \"%s\" in specified context.",
-                                  copy_name ($3));
-                         $$ = SYMBOL_BLOCK_VALUE (tem); }
-       ;
-
-variable:      block COLONCOLON name
-                       { struct symbol *sym;
-                         sym = lookup_symbol (copy_name ($3), $1,
-                                              VAR_NAMESPACE, 0, NULL);
-                         if (sym == 0)
-                           error ("No symbol \"%s\" in specified context.",
-                                  copy_name ($3));
-                         write_exp_elt_opcode (OP_VAR_VALUE);
-                         write_exp_elt_sym (sym);
-                         write_exp_elt_opcode (OP_VAR_VALUE); }
-       ;
-
-variable:      typebase COLONCOLON name
-                       {
-                         struct type *type = $1;
-                         if (TYPE_CODE (type) != TYPE_CODE_STRUCT
-                             && TYPE_CODE (type) != TYPE_CODE_UNION)
-                           error ("`%s' is not defined as an aggregate type.",
-                                  TYPE_NAME (type));
-
-                         write_exp_elt_opcode (OP_SCOPE);
-                         write_exp_elt_type (type);
-                         write_exp_string ($3);
-                         write_exp_elt_opcode (OP_SCOPE);
-                       }
-       |       typebase COLONCOLON '~' name
-                       {
-                         struct type *type = $1;
-                         if (TYPE_CODE (type) != TYPE_CODE_STRUCT
-                             && TYPE_CODE (type) != TYPE_CODE_UNION)
-                           error ("`%s' is not defined as an aggregate type.",
-                                  TYPE_NAME (type));
-
-                         if (strcmp (type_name_no_tag (type), $4.ptr))
-                           error ("invalid destructor `%s::~%s'",
-                                  type_name_no_tag (type), $4.ptr);
-
-                         write_exp_elt_opcode (OP_SCOPE);
-                         write_exp_elt_type (type);
-                         write_exp_string ($4);
-                         write_exp_elt_opcode (OP_SCOPE);
-                         write_exp_elt_opcode (UNOP_LOGNOT);
-                       }
-       |       COLONCOLON name
-                       {
-                         char *name = copy_name ($2);
-                         struct symbol *sym;
-                         int i;
-
-                         sym =
-                           lookup_symbol (name, 0, VAR_NAMESPACE, 0, NULL);
-                         if (sym)
-                           {
-                             write_exp_elt_opcode (OP_VAR_VALUE);
-                             write_exp_elt_sym (sym);
-                             write_exp_elt_opcode (OP_VAR_VALUE);
-                             break;
-                           }
-                         for (i = 0; i < misc_function_count; i++)
-                           if (!strcmp (misc_function_vector[i].name, name))
-                             break;
-
-                         if (i < misc_function_count)
-                           {
-                             enum misc_function_type mft =
-                                 misc_function_vector[i].type;
-                             
-                             write_exp_elt_opcode (OP_LONG);
-                             write_exp_elt_type (builtin_type_int);
-                             write_exp_elt_longcst ((LONGEST) misc_function_vector[i].address);
-                             write_exp_elt_opcode (OP_LONG);
-                             write_exp_elt_opcode (UNOP_MEMVAL);
-                             if (mft == mf_data || mft == mf_bss)
-                               write_exp_elt_type (builtin_type_int);
-                             else if (mft == mf_text)
-                               write_exp_elt_type (lookup_function_type (builtin_type_int));
-                             else
-                               write_exp_elt_type (builtin_type_char);
-                             write_exp_elt_opcode (UNOP_MEMVAL);
-                           }
-                         else
-                           if (symtab_list == 0
-                               && partial_symtab_list == 0)
-                             error ("No symbol table is loaded.  Use the \"file\" command.");
-                           else
-                             error ("No symbol \"%s\" in current context.", name);
-                       }
-       ;
-
-variable:      name_not_typename
-                       { struct symbol *sym = $1.sym;
-
-                         if (sym)
-                           {
-                             switch (sym->class)
-                               {
-                               case LOC_REGISTER:
-                               case LOC_ARG:
-                               case LOC_REF_ARG:
-                               case LOC_REGPARM:
-                               case LOC_LOCAL:
-                               case LOC_LOCAL_ARG:
-                                 if (innermost_block == 0 ||
-                                     contained_in (block_found, 
-                                                   innermost_block))
-                                   innermost_block = block_found;
-                               case LOC_UNDEF:
-                               case LOC_CONST:
-                               case LOC_STATIC:
-                               case LOC_TYPEDEF:
-                               case LOC_LABEL:
-                               case LOC_BLOCK:
-                               case LOC_CONST_BYTES:
-
-                                 /* In this case the expression can
-                                    be evaluated regardless of what
-                                    frame we are in, so there is no
-                                    need to check for the
-                                    innermost_block.  These cases are
-                                    listed so that gcc -Wall will
-                                    report types that may not have
-                                    been considered.  */
-
-                                 break;
-                               }
-                             write_exp_elt_opcode (OP_VAR_VALUE);
-                             write_exp_elt_sym (sym);
-                             write_exp_elt_opcode (OP_VAR_VALUE);
-                           }
-                         else if ($1.is_a_field_of_this)
-                           {
-                             /* C++: it hangs off of `this'.  Must
-                                not inadvertently convert from a method call
-                                to data ref.  */
-                             if (innermost_block == 0 || 
-                                 contained_in (block_found, innermost_block))
-                               innermost_block = block_found;
-                             write_exp_elt_opcode (OP_THIS);
-                             write_exp_elt_opcode (OP_THIS);
-                             write_exp_elt_opcode (STRUCTOP_PTR);
-                             write_exp_string ($1.stoken);
-                             write_exp_elt_opcode (STRUCTOP_PTR);
-                           }
-                         else
-                           {
-                             register int i;
-                             register char *arg = copy_name ($1.stoken);
-
-                               /* FIXME, this search is linear!  At least
-                                  optimize the strcmp with a 1-char cmp... */
-                             for (i = 0; i < misc_function_count; i++)
-                               if (!strcmp (misc_function_vector[i].name, arg))
-                                 break;
-
-                             if (i < misc_function_count)
-                               {
-                                 enum misc_function_type mft =
-                                     misc_function_vector[i].type;
-                                 
-                                 write_exp_elt_opcode (OP_LONG);
-                                 write_exp_elt_type (builtin_type_int);
-                                 write_exp_elt_longcst ((LONGEST) misc_function_vector[i].address);
-                                 write_exp_elt_opcode (OP_LONG);
-                                 write_exp_elt_opcode (UNOP_MEMVAL);
-                                 if (mft == mf_data || mft == mf_bss)
-                                   write_exp_elt_type (builtin_type_int);
-                                 else if (mft == mf_text)
-                                   write_exp_elt_type (lookup_function_type (builtin_type_int));
-                                 else
-                                   write_exp_elt_type (builtin_type_char);
-                                 write_exp_elt_opcode (UNOP_MEMVAL);
-                               }
-                             else if (symtab_list == 0
-                                      && partial_symtab_list == 0)
-                               error ("No symbol table is loaded.  Use the \"file\" command.");
-                             else
-                               error ("No symbol \"%s\" in current context.",
-                                      copy_name ($1.stoken));
-                           }
-                       }
-       ;
-
-
-ptype  :       typebase
-       |       typebase abs_decl
-               {
-                 /* This is where the interesting stuff happens.  */
-                 int done = 0;
-                 int array_size;
-                 struct type *follow_type = $1;
-                 
-                 while (!done)
-                   switch (pop_type ())
-                     {
-                     case tp_end:
-                       done = 1;
-                       break;
-                     case tp_pointer:
-                       follow_type = lookup_pointer_type (follow_type);
-                       break;
-                     case tp_reference:
-                       follow_type = lookup_reference_type (follow_type);
-                       break;
-                     case tp_array:
-                       array_size = pop_type_int ();
-                       if (array_size != -1)
-                         follow_type = create_array_type (follow_type,
-                                                          array_size);
-                       else
-                         follow_type = lookup_pointer_type (follow_type);
-                       break;
-                     case tp_function:
-                       follow_type = lookup_function_type (follow_type);
-                       break;
-                     }
-                 $$ = follow_type;
-               }
-       ;
-
-abs_decl:      '*'
-                       { push_type (tp_pointer); $$ = 0; }
-       |       '*' abs_decl
-                       { push_type (tp_pointer); $$ = $2; }
-       |       '&'
-                       { push_type (tp_reference); $$ = 0; }
-       |       '&' abs_decl
-                       { push_type (tp_reference); $$ = $2; }
-       |       direct_abs_decl
-       ;
-
-direct_abs_decl: '(' abs_decl ')'
-                       { $$ = $2; }
-       |       direct_abs_decl array_mod
-                       {
-                         push_type_int ($2);
-                         push_type (tp_array);
-                       }
-       |       array_mod
-                       {
-                         push_type_int ($1);
-                         push_type (tp_array);
-                         $$ = 0;
-                       }
-       |       direct_abs_decl func_mod
-                       { push_type (tp_function); }
-       |       func_mod
-                       { push_type (tp_function); }
-       ;
-
-array_mod:     '[' ']'
-                       { $$ = -1; }
-       |       '[' INT ']'
-                       { $$ = $2; }
-       ;
-
-func_mod:      '(' ')'
-                       { $$ = 0; }
-       ;
-
-type   :       ptype
-       |       typebase COLONCOLON '*'
-                       { $$ = lookup_member_type (builtin_type_int, $1); }
-       |       type '(' typebase COLONCOLON '*' ')'
-                       { $$ = lookup_member_type ($1, $3); }
-       |       type '(' typebase COLONCOLON '*' ')' '(' ')'
-                       { $$ = lookup_member_type
-                           (lookup_function_type ($1), $3); }
-       |       type '(' typebase COLONCOLON '*' ')' '(' nonempty_typelist ')'
-                       { $$ = lookup_member_type
-                           (lookup_function_type ($1), $3);
-                         free ($8); }
-       ;
-
-typebase
-       :       TYPENAME
-                       { $$ = $1.type; }
-       |       INT_KEYWORD
-                       { $$ = builtin_type_int; }
-       |       LONG
-                       { $$ = builtin_type_long; }
-       |       SHORT
-                       { $$ = builtin_type_short; }
-       |       LONG INT_KEYWORD
-                       { $$ = builtin_type_long; }
-       |       UNSIGNED LONG INT_KEYWORD
-                       { $$ = builtin_type_unsigned_long; }
-       |       LONG LONG
-                       { $$ = builtin_type_long_long; }
-       |       LONG LONG INT_KEYWORD
-                       { $$ = builtin_type_long_long; }
-       |       UNSIGNED LONG LONG
-                       { $$ = builtin_type_unsigned_long_long; }
-       |       UNSIGNED LONG LONG INT_KEYWORD
-                       { $$ = builtin_type_unsigned_long_long; }
-       |       SHORT INT_KEYWORD
-                       { $$ = builtin_type_short; }
-       |       UNSIGNED SHORT INT_KEYWORD
-                       { $$ = builtin_type_unsigned_short; }
-       |       STRUCT name
-                       { $$ = lookup_struct (copy_name ($2),
-                                             expression_context_block); }
-       |       UNION name
-                       { $$ = lookup_union (copy_name ($2),
-                                            expression_context_block); }
-       |       ENUM name
-                       { $$ = lookup_enum (copy_name ($2),
-                                           expression_context_block); }
-       |       UNSIGNED typename
-                       { $$ = lookup_unsigned_typename (TYPE_NAME($2.type)); }
-       |       UNSIGNED
-                       { $$ = builtin_type_unsigned_int; }
-       |       SIGNED typename
-                       { $$ = $2.type; }
-       |       SIGNED
-                       { $$ = builtin_type_int; }
-       ;
-
-typename:      TYPENAME
-       |       INT_KEYWORD
-               {
-                 $$.stoken.ptr = "int";
-                 $$.stoken.length = 3;
-                 $$.type = builtin_type_int;
-               }
-       |       LONG
-               {
-                 $$.stoken.ptr = "long";
-                 $$.stoken.length = 4;
-                 $$.type = builtin_type_long;
-               }
-       |       SHORT
-               {
-                 $$.stoken.ptr = "short";
-                 $$.stoken.length = 5;
-                 $$.type = builtin_type_short;
-               }
-       ;
-
-nonempty_typelist
-       :       type
-               { $$ = (struct type **)xmalloc (sizeof (struct type *) * 2);
-                 $$[0] = (struct type *)0;
-                 $$[1] = $1;
-               }
-       |       nonempty_typelist ',' type
-               { int len = sizeof (struct type *) * ++($<ivec>1[0]);
-                 $$ = (struct type **)xrealloc ($1, len);
-                 $$[$<ivec>$[0]] = $3;
-               }
-       ;
-
-name   :       NAME { $$ = $1.stoken; }
-       |       BLOCKNAME { $$ = $1.stoken; }
-       |       TYPENAME { $$ = $1.stoken; }
-       |       NAME_OR_INT  { $$ = $1.stoken; }
-       |       NAME_OR_UINT  { $$ = $1.stoken; }
-       ;
-
-name_not_typename :    NAME
-       |       BLOCKNAME
-/* These would be useful if name_not_typename was useful, but it is just
-   a fake for "variable", so these cause reduce/reduce conflicts because
-   the parser can't tell whether NAME_OR_INT is a name_not_typename (=variable,
-   =exp) or just an exp.  If name_not_typename was ever used in an lvalue
-   context where only a name could occur, this might be useful.
-       |       NAME_OR_INT
-       |       NAME_OR_UINT
- */
-       ;
-
-%%
-\f
-/* Begin counting arguments for a function call,
-   saving the data about any containing call.  */
-
-static void
-start_arglist ()
-{
-  register struct funcall *new = (struct funcall *) xmalloc (sizeof (struct funcall));
-
-  new->next = funcall_chain;
-  new->arglist_len = arglist_len;
-  arglist_len = 0;
-  funcall_chain = new;
-}
-
-/* Return the number of arguments in a function call just terminated,
-   and restore the data for the containing function call.  */
-
-static int
-end_arglist ()
-{
-  register int val = arglist_len;
-  register struct funcall *call = funcall_chain;
-  funcall_chain = call->next;
-  arglist_len = call->arglist_len;
-  free (call);
-  return val;
-}
-
-/* Free everything in the funcall chain.
-   Used when there is an error inside parsing.  */
-
-static void
-free_funcalls ()
-{
-  register struct funcall *call, *next;
-
-  for (call = funcall_chain; call; call = next)
-    {
-      next = call->next;
-      free (call);
-    }
-}
-\f
-/* This page contains the functions for adding data to the  struct expression
-   being constructed.  */
-
-/* Add one element to the end of the expression.  */
-
-/* To avoid a bug in the Sun 4 compiler, we pass things that can fit into
-   a register through here */
-
-static void
-write_exp_elt (expelt)
-     union exp_element expelt;
-{
-  if (expout_ptr >= expout_size)
-    {
-      expout_size *= 2;
-      expout = (struct expression *) xrealloc (expout,
-                                              sizeof (struct expression)
-                                              + expout_size * sizeof (union exp_element));
-    }
-  expout->elts[expout_ptr++] = expelt;
-}
-
-static void
-write_exp_elt_opcode (expelt)
-     enum exp_opcode expelt;
-{
-  union exp_element tmp;
-
-  tmp.opcode = expelt;
-
-  write_exp_elt (tmp);
-}
-
-static void
-write_exp_elt_sym (expelt)
-     struct symbol *expelt;
-{
-  union exp_element tmp;
-
-  tmp.symbol = expelt;
-
-  write_exp_elt (tmp);
-}
-
-static void
-write_exp_elt_longcst (expelt)
-     LONGEST expelt;
-{
-  union exp_element tmp;
-
-  tmp.longconst = expelt;
-
-  write_exp_elt (tmp);
-}
-
-static void
-write_exp_elt_dblcst (expelt)
-     double expelt;
-{
-  union exp_element tmp;
-
-  tmp.doubleconst = expelt;
-
-  write_exp_elt (tmp);
-}
-
-static void
-write_exp_elt_type (expelt)
-     struct type *expelt;
-{
-  union exp_element tmp;
-
-  tmp.type = expelt;
-
-  write_exp_elt (tmp);
-}
-
-static void
-write_exp_elt_intern (expelt)
-     struct internalvar *expelt;
-{
-  union exp_element tmp;
-
-  tmp.internalvar = expelt;
-
-  write_exp_elt (tmp);
-}
-
-/* Add a string constant to the end of the expression.
-   Follow it by its length in bytes, as a separate exp_element.  */
-
-static void
-write_exp_string (str)
-     struct stoken str;
-{
-  register int len = str.length;
-  register int lenelt
-    = (len + sizeof (union exp_element)) / sizeof (union exp_element);
-
-  expout_ptr += lenelt;
-
-  if (expout_ptr >= expout_size)
-    {
-      expout_size = max (expout_size * 2, expout_ptr + 10);
-      expout = (struct expression *)
-       xrealloc (expout, (sizeof (struct expression)
-                          + (expout_size * sizeof (union exp_element))));
-    }
-  bcopy (str.ptr, (char *) &expout->elts[expout_ptr - lenelt], len);
-  ((char *) &expout->elts[expout_ptr - lenelt])[len] = 0;
-  write_exp_elt_longcst ((LONGEST) len);
-}
-\f
-/* During parsing of a C expression, the pointer to the next character
-   is in this variable.  */
-
-static char *lexptr;
-
-/* Tokens that refer to names do so with explicit pointer and length,
-   so they can share the storage that lexptr is parsing.
-
-   When it is necessary to pass a name to a function that expects
-   a null-terminated string, the substring is copied out
-   into a block of storage that namecopy points to.
-
-   namecopy is allocated once, guaranteed big enough, for each parsing.  */
-
-static char *namecopy;
-
-/* Current depth in parentheses within the expression.  */
-
-static int paren_depth;
-
-/* Nonzero means stop parsing on first comma (if not within parentheses).  */
-
-static int comma_terminates;
-
-/* Take care of parsing a number (anything that starts with a digit).
-   Set yylval and return the token type; update lexptr.
-   LEN is the number of characters in it.  */
-
-/*** Needs some error checking for the float case ***/
-
-static int
-parse_number (p, len, parsed_float, putithere)
-     register char *p;
-     register int len;
-     int parsed_float;
-     YYSTYPE *putithere;
-{
-  register LONGEST n = 0;
-  register int i;
-  register int c;
-  register int base = input_radix;
-  int unsigned_p = 0;
-
-  extern double atof ();
-
-  if (parsed_float)
-    {
-      /* It's a float since it contains a point or an exponent.  */
-      putithere->dval = atof (p);
-      return FLOAT;
-    }
-
-  /* Handle base-switching prefixes 0x, 0t, 0d, 0 */
-  if (p[0] == '0')
-    switch (p[1])
-      {
-      case 'x':
-      case 'X':
-       if (len >= 3)
-         {
-           p += 2;
-           base = 16;
-           len -= 2;
-         }
-       break;
-
-      case 't':
-      case 'T':
-      case 'd':
-      case 'D':
-       if (len >= 3)
-         {
-           p += 2;
-           base = 10;
-           len -= 2;
-         }
-       break;
-
-      default:
-       base = 8;
-       break;
-      }
-
-  while (len-- > 0)
-    {
-      c = *p++;
-      if (c >= 'A' && c <= 'Z')
-       c += 'a' - 'A';
-      if (c != 'l' && c != 'u')
-       n *= base;
-      if (c >= '0' && c <= '9')
-       n += i = c - '0';
-      else
-       {
-         if (base > 10 && c >= 'a' && c <= 'f')
-           n += i = c - 'a' + 10;
-         else if (len == 0 && c == 'l')
-           ;
-         else if (len == 0 && c == 'u')
-           unsigned_p = 1;
-         else
-           return ERROR;       /* Char not a digit */
-       }
-      if (i >= base)
-       return ERROR;           /* Invalid digit in this base */
-    }
-
-  if (unsigned_p)
-    {
-      putithere->ulval = n;
-      return UINT;
-    }
-  else
-    {
-      putithere->lval = n;
-      return INT;
-    }
-}
-
-struct token
-{
-  char *operator;
-  int token;
-  enum exp_opcode opcode;
-};
-
-const static struct token tokentab3[] =
-  {
-    {">>=", ASSIGN_MODIFY, BINOP_RSH},
-    {"<<=", ASSIGN_MODIFY, BINOP_LSH}
-  };
-
-const static struct token tokentab2[] =
-  {
-    {"+=", ASSIGN_MODIFY, BINOP_ADD},
-    {"-=", ASSIGN_MODIFY, BINOP_SUB},
-    {"*=", ASSIGN_MODIFY, BINOP_MUL},
-    {"/=", ASSIGN_MODIFY, BINOP_DIV},
-    {"%=", ASSIGN_MODIFY, BINOP_REM},
-    {"|=", ASSIGN_MODIFY, BINOP_LOGIOR},
-    {"&=", ASSIGN_MODIFY, BINOP_LOGAND},
-    {"^=", ASSIGN_MODIFY, BINOP_LOGXOR},
-    {"++", INCREMENT, BINOP_END},
-    {"--", DECREMENT, BINOP_END},
-    {"->", ARROW, BINOP_END},
-    {"&&", AND, BINOP_END},
-    {"||", OR, BINOP_END},
-    {"::", COLONCOLON, BINOP_END},
-    {"<<", LSH, BINOP_END},
-    {">>", RSH, BINOP_END},
-    {"==", EQUAL, BINOP_END},
-    {"!=", NOTEQUAL, BINOP_END},
-    {"<=", LEQ, BINOP_END},
-    {">=", GEQ, BINOP_END}
-  };
-
-/* assign machine-independent names to certain registers 
- * (unless overridden by the REGISTER_NAMES table)
- */
-struct std_regs {
-       char *name;
-       int regnum;
-} std_regs[] = {
-#ifdef PC_REGNUM
-       { "pc", PC_REGNUM },
-#endif
-#ifdef FP_REGNUM
-       { "fp", FP_REGNUM },
-#endif
-#ifdef SP_REGNUM
-       { "sp", SP_REGNUM },
-#endif
-#ifdef PS_REGNUM
-       { "ps", PS_REGNUM },
-#endif
-};
-
-#define NUM_STD_REGS (sizeof std_regs / sizeof std_regs[0])
-
-/* Read one token, getting characters through lexptr.  */
-
-static int
-yylex ()
-{
-  register int c;
-  register int namelen;
-  register unsigned i;
-  register char *tokstart;
-
- retry:
-
-  tokstart = lexptr;
-  /* See if it is a special token of length 3.  */
-  for (i = 0; i < sizeof tokentab3 / sizeof tokentab3[0]; i++)
-    if (!strncmp (tokstart, tokentab3[i].operator, 3))
-      {
-       lexptr += 3;
-       yylval.opcode = tokentab3[i].opcode;
-       return tokentab3[i].token;
-      }
-
-  /* See if it is a special token of length 2.  */
-  for (i = 0; i < sizeof tokentab2 / sizeof tokentab2[0]; i++)
-    if (!strncmp (tokstart, tokentab2[i].operator, 2))
-      {
-       lexptr += 2;
-       yylval.opcode = tokentab2[i].opcode;
-       return tokentab2[i].token;
-      }
-
-  switch (c = *tokstart)
-    {
-    case 0:
-      return 0;
-
-    case ' ':
-    case '\t':
-    case '\n':
-      lexptr++;
-      goto retry;
-
-    case '\'':
-      lexptr++;
-      c = *lexptr++;
-      if (c == '\\')
-       c = parse_escape (&lexptr);
-      yylval.lval = c;
-      c = *lexptr++;
-      if (c != '\'')
-       error ("Invalid character constant.");
-      return CHAR;
-
-    case '(':
-      paren_depth++;
-      lexptr++;
-      return c;
-
-    case ')':
-      if (paren_depth == 0)
-       return 0;
-      paren_depth--;
-      lexptr++;
-      return c;
-
-    case ',':
-      if (comma_terminates && paren_depth == 0)
-       return 0;
-      lexptr++;
-      return c;
-
-    case '.':
-      /* Might be a floating point number.  */
-      if (lexptr[1] < '0' || lexptr[1] > '9')
-       goto symbol;            /* Nope, must be a symbol. */
-      /* FALL THRU into number case.  */
-
-    case '0':
-    case '1':
-    case '2':
-    case '3':
-    case '4':
-    case '5':
-    case '6':
-    case '7':
-    case '8':
-    case '9':
-      {
-       /* It's a number.  */
-       int got_dot = 0, got_e = 0, toktype;
-       register char *p = tokstart;
-       int hex = input_radix > 10;
-
-       if (c == '0' && (p[1] == 'x' || p[1] == 'X'))
-         {
-           p += 2;
-           hex = 1;
-         }
-       else if (c == '0' && (p[1]=='t' || p[1]=='T' || p[1]=='d' || p[1]=='D'))
-         {
-           p += 2;
-           hex = 0;
-         }
-
-       for (;; ++p)
-         {
-           if (!hex && !got_e && (*p == 'e' || *p == 'E'))
-             got_dot = got_e = 1;
-           else if (!hex && !got_dot && *p == '.')
-             got_dot = 1;
-           else if (got_e && (p[-1] == 'e' || p[-1] == 'E')
-                    && (*p == '-' || *p == '+'))
-             /* This is the sign of the exponent, not the end of the
-                number.  */
-             continue;
-           /* We will take any letters or digits.  parse_number will
-              complain if past the radix, or if L or U are not final.  */
-           else if ((*p < '0' || *p > '9')
-                    && ((*p < 'a' || *p > 'z')
-                                 && (*p < 'A' || *p > 'Z')))
-             break;
-         }
-       toktype = parse_number (tokstart, p - tokstart, got_dot|got_e, &yylval);
-        if (toktype == ERROR)
-         {
-           char *err_copy = (char *) alloca (p - tokstart + 1);
-
-           bcopy (tokstart, err_copy, p - tokstart);
-           err_copy[p - tokstart] = 0;
-           error ("Invalid number \"%s\".", err_copy);
-         }
-       lexptr = p;
-       return toktype;
-      }
-
-    case '+':
-    case '-':
-    case '*':
-    case '/':
-    case '%':
-    case '|':
-    case '&':
-    case '^':
-    case '~':
-    case '!':
-    case '@':
-    case '<':
-    case '>':
-    case '[':
-    case ']':
-    case '?':
-    case ':':
-    case '=':
-    case '{':
-    case '}':
-    symbol:
-      lexptr++;
-      return c;
-
-    case '"':
-      for (namelen = 1; (c = tokstart[namelen]) != '"'; namelen++)
-       if (c == '\\')
-         {
-           c = tokstart[++namelen];
-           if (c >= '0' && c <= '9')
-             {
-               c = tokstart[++namelen];
-               if (c >= '0' && c <= '9')
-                 c = tokstart[++namelen];
-             }
-         }
-      yylval.sval.ptr = tokstart + 1;
-      yylval.sval.length = namelen - 1;
-      lexptr += namelen + 1;
-      return STRING;
-    }
-
-  if (!(c == '_' || c == '$'
-       || (c >= 'a' && c <= 'z') || (c >= 'A' && c <= 'Z')))
-    /* We must have come across a bad character (e.g. ';').  */
-    error ("Invalid character '%c' in expression.", c);
-
-  /* It's a name.  See how long it is.  */
-  namelen = 0;
-  for (c = tokstart[namelen];
-       (c == '_' || c == '$' || (c >= '0' && c <= '9')
-       || (c >= 'a' && c <= 'z') || (c >= 'A' && c <= 'Z'));
-       c = tokstart[++namelen])
-    ;
-
-  /* The token "if" terminates the expression and is NOT 
-     removed from the input stream.  */
-  if (namelen == 2 && tokstart[0] == 'i' && tokstart[1] == 'f')
-    {
-      return 0;
-    }
-
-  lexptr += namelen;
-
-  /* Handle the tokens $digits; also $ (short for $0) and $$ (short for $$1)
-     and $$digits (equivalent to $<-digits> if you could type that).
-     Make token type LAST, and put the number (the digits) in yylval.  */
-
-  if (*tokstart == '$')
-    {
-      register int negate = 0;
-      c = 1;
-      /* Double dollar means negate the number and add -1 as well.
-        Thus $$ alone means -1.  */
-      if (namelen >= 2 && tokstart[1] == '$')
-       {
-         negate = 1;
-         c = 2;
-       }
-      if (c == namelen)
-       {
-         /* Just dollars (one or two) */
-         yylval.lval = - negate;
-         return LAST;
-       }
-      /* Is the rest of the token digits?  */
-      for (; c < namelen; c++)
-       if (!(tokstart[c] >= '0' && tokstart[c] <= '9'))
-         break;
-      if (c == namelen)
-       {
-         yylval.lval = atoi (tokstart + 1 + negate);
-         if (negate)
-           yylval.lval = - yylval.lval;
-         return LAST;
-       }
-    }
-
-  /* Handle tokens that refer to machine registers:
-     $ followed by a register name.  */
-
-  if (*tokstart == '$') {
-    for (c = 0; c < NUM_REGS; c++)
-      if (namelen - 1 == strlen (reg_names[c])
-         && !strncmp (tokstart + 1, reg_names[c], namelen - 1))
-       {
-         yylval.lval = c;
-         return REGNAME;
-       }
-    for (c = 0; c < NUM_STD_REGS; c++)
-     if (namelen - 1 == strlen (std_regs[c].name)
-        && !strncmp (tokstart + 1, std_regs[c].name, namelen - 1))
-       {
-        yylval.lval = std_regs[c].regnum;
-        return REGNAME;
-       }
-  }
-  /* Catch specific keywords.  Should be done with a data structure.  */
-  switch (namelen)
-    {
-    case 8:
-      if (!strncmp (tokstart, "unsigned", 8))
-       return UNSIGNED;
-      break;
-    case 6:
-      if (!strncmp (tokstart, "struct", 6))
-       return STRUCT;
-      if (!strncmp (tokstart, "signed", 6))
-       return SIGNED;
-      if (!strncmp (tokstart, "sizeof", 6))      
-       return SIZEOF;
-      break;
-    case 5:
-      if (!strncmp (tokstart, "union", 5))
-       return UNION;
-      if (!strncmp (tokstart, "short", 5))
-       return SHORT;
-      break;
-    case 4:
-      if (!strncmp (tokstart, "enum", 4))
-       return ENUM;
-      if (!strncmp (tokstart, "long", 4))
-       return LONG;
-      if (!strncmp (tokstart, "this", 4))
-       {
-         static const char this_name[] =
-                                { CPLUS_MARKER, 't', 'h', 'i', 's', '\0' };
-
-         if (lookup_symbol (this_name, expression_context_block,
-                            VAR_NAMESPACE, 0, NULL))
-           return THIS;
-       }
-      break;
-    case 3:
-      if (!strncmp (tokstart, "int", 3))
-       return INT_KEYWORD;
-      break;
-    default:
-      break;
-    }
-
-  yylval.sval.ptr = tokstart;
-  yylval.sval.length = namelen;
-
-  /* Any other names starting in $ are debugger internal variables.  */
-
-  if (*tokstart == '$')
-    {
-      yylval.ivar =  lookup_internalvar (copy_name (yylval.sval) + 1);
-      return VARIABLE;
-    }
-
-  /* Use token-type BLOCKNAME for symbols that happen to be defined as
-     functions or symtabs.  If this is not so, then ...
-     Use token-type TYPENAME for symbols that happen to be defined
-     currently as names of types; NAME for other symbols.
-     The caller is not constrained to care about the distinction.  */
-  {
-    char *tmp = copy_name (yylval.sval);
-    struct symbol *sym;
-    int is_a_field_of_this = 0;
-    int hextype;
-
-    sym = lookup_symbol (tmp, expression_context_block,
-                        VAR_NAMESPACE, &is_a_field_of_this, NULL);
-    if ((sym && SYMBOL_CLASS (sym) == LOC_BLOCK) ||
-        lookup_partial_symtab (tmp))
-      {
-       yylval.ssym.sym = sym;
-       yylval.ssym.is_a_field_of_this = is_a_field_of_this;
-       return BLOCKNAME;
-      }
-    if (sym && SYMBOL_CLASS (sym) == LOC_TYPEDEF)
-        {
-         yylval.tsym.type = SYMBOL_TYPE (sym);
-         return TYPENAME;
-        }
-    if ((yylval.tsym.type = lookup_primitive_typename (tmp)) != 0)
-       return TYPENAME;
-
-    /* Input names that aren't symbols but ARE valid hex numbers,
-       when the input radix permits them, can be names or numbers
-       depending on the parse.  Note we support radixes > 16 here.  */
-    if (!sym && 
-        ((tokstart[0] >= 'a' && tokstart[0] < 'a' + input_radix - 10) ||
-         (tokstart[0] >= 'A' && tokstart[0] < 'A' + input_radix - 10)))
-      {
-       YYSTYPE newlval;        /* Its value is ignored.  */
-       hextype = parse_number (tokstart, namelen, 0, &newlval);
-       if (hextype == INT)
-         {
-           yylval.ssym.sym = sym;
-           yylval.ssym.is_a_field_of_this = is_a_field_of_this;
-           return NAME_OR_INT;
-         }
-       if (hextype == UINT)
-         {
-           yylval.ssym.sym = sym;
-           yylval.ssym.is_a_field_of_this = is_a_field_of_this;
-           return NAME_OR_UINT;
-         }
-      }
-
-    /* Any other kind of symbol */
-    yylval.ssym.sym = sym;
-    yylval.ssym.is_a_field_of_this = is_a_field_of_this;
-    return NAME;
-  }
-}
-
-/* ARGSUSED */
-static void
-yyerror (msg)
-     char *msg;
-{
-  error ("Invalid syntax in expression.");
-}
-
-/* Return a null-terminated temporary copy of the name
-   of a string token.  */
-
-static char *
-copy_name (token)
-     struct stoken token;
-{
-  bcopy (token.ptr, namecopy, token.length);
-  namecopy[token.length] = 0;
-  return namecopy;
-}
-\f
-/* Reverse an expression from suffix form (in which it is constructed)
-   to prefix form (in which we can conveniently print or execute it).  */
-
-static void prefixify_subexp ();
-
-static void
-prefixify_expression (expr)
-     register struct expression *expr;
-{
-  register int len = sizeof (struct expression) +
-                                   expr->nelts * sizeof (union exp_element);
-  register struct expression *temp;
-  register int inpos = expr->nelts, outpos = 0;
-
-  temp = (struct expression *) alloca (len);
-
-  /* Copy the original expression into temp.  */
-  bcopy (expr, temp, len);
-
-  prefixify_subexp (temp, expr, inpos, outpos);
-}
-
-/* Return the number of exp_elements in the subexpression of EXPR
-   whose last exp_element is at index ENDPOS - 1 in EXPR.  */
-
-static int
-length_of_subexp (expr, endpos)
-     register struct expression *expr;
-     register int endpos;
-{
-  register int oplen = 1;
-  register int args = 0;
-  register int i;
-
-  if (endpos < 0)
-    error ("?error in length_of_subexp");
-
-  i = (int) expr->elts[endpos - 1].opcode;
-
-  switch (i)
-    {
-      /* C++  */
-    case OP_SCOPE:
-      oplen = 4 + ((expr->elts[endpos - 2].longconst
-                   + sizeof (union exp_element))
-                  / sizeof (union exp_element));
-      break;
-
-    case OP_LONG:
-    case OP_DOUBLE:
-      oplen = 4;
-      break;
-
-    case OP_VAR_VALUE:
-    case OP_LAST:
-    case OP_REGISTER:
-    case OP_INTERNALVAR:
-      oplen = 3;
-      break;
-
-    case OP_FUNCALL:
-      oplen = 3;
-      args = 1 + expr->elts[endpos - 2].longconst;
-      break;
-
-    case UNOP_CAST:
-    case UNOP_MEMVAL:
-      oplen = 3;
-      args = 1;
-      break;
-
-    case STRUCTOP_STRUCT:
-    case STRUCTOP_PTR:
-      args = 1;
-    case OP_STRING:
-      oplen = 3 + ((expr->elts[endpos - 2].longconst
-                   + sizeof (union exp_element))
-                  / sizeof (union exp_element));
-      break;
-
-    case TERNOP_COND:
-      args = 3;
-      break;
-
-    case BINOP_ASSIGN_MODIFY:
-      oplen = 3;
-      args = 2;
-      break;
-
-      /* C++ */
-    case OP_THIS:
-      oplen = 2;
-      break;
-
-    default:
-      args = 1 + (i < (int) BINOP_END);
-    }
-
-  while (args > 0)
-    {
-      oplen += length_of_subexp (expr, endpos - oplen);
-      args--;
-    }
-
-  return oplen;
-}
-
-/* Copy the subexpression ending just before index INEND in INEXPR
-   into OUTEXPR, starting at index OUTBEG.
-   In the process, convert it from suffix to prefix form.  */
-
-static void
-prefixify_subexp (inexpr, outexpr, inend, outbeg)
-     register struct expression *inexpr;
-     struct expression *outexpr;
-     register int inend;
-     int outbeg;
-{
-  register int oplen = 1;
-  register int args = 0;
-  register int i;
-  int *arglens;
-  enum exp_opcode opcode;
-
-  /* Compute how long the last operation is (in OPLEN),
-     and also how many preceding subexpressions serve as
-     arguments for it (in ARGS).  */
-
-  opcode = inexpr->elts[inend - 1].opcode;
-  switch (opcode)
-    {
-      /* C++  */
-    case OP_SCOPE:
-      oplen = 4 + ((inexpr->elts[inend - 2].longconst
-                   + sizeof (union exp_element))
-                  / sizeof (union exp_element));
-      break;
-
-    case OP_LONG:
-    case OP_DOUBLE:
-      oplen = 4;
-      break;
-
-    case OP_VAR_VALUE:
-    case OP_LAST:
-    case OP_REGISTER:
-    case OP_INTERNALVAR:
-      oplen = 3;
-      break;
-
-    case OP_FUNCALL:
-      oplen = 3;
-      args = 1 + inexpr->elts[inend - 2].longconst;
-      break;
-
-    case UNOP_CAST:
-    case UNOP_MEMVAL:
-      oplen = 3;
-      args = 1;
-      break;
-
-    case STRUCTOP_STRUCT:
-    case STRUCTOP_PTR:
-      args = 1;
-    case OP_STRING:
-      oplen = 3 + ((inexpr->elts[inend - 2].longconst
-                   + sizeof (union exp_element))
-                  / sizeof (union exp_element));
-                  
-      break;
-
-    case TERNOP_COND:
-      args = 3;
-      break;
-
-    case BINOP_ASSIGN_MODIFY:
-      oplen = 3;
-      args = 2;
-      break;
-
-      /* C++ */
-    case OP_THIS:
-      oplen = 2;
-      break;
-
-    default:
-      args = 1 + ((int) opcode < (int) BINOP_END);
-    }
-
-  /* Copy the final operator itself, from the end of the input
-     to the beginning of the output.  */
-  inend -= oplen;
-  bcopy (&inexpr->elts[inend], &outexpr->elts[outbeg],
-        oplen * sizeof (union exp_element));
-  outbeg += oplen;
-
-  /* Find the lengths of the arg subexpressions.  */
-  arglens = (int *) alloca (args * sizeof (int));
-  for (i = args - 1; i >= 0; i--)
-    {
-      oplen = length_of_subexp (inexpr, inend);
-      arglens[i] = oplen;
-      inend -= oplen;
-    }
-
-  /* Now copy each subexpression, preserving the order of
-     the subexpressions, but prefixifying each one.
-     In this loop, inend starts at the beginning of
-     the expression this level is working on
-     and marches forward over the arguments.
-     outbeg does similarly in the output.  */
-  for (i = 0; i < args; i++)
-    {
-      oplen = arglens[i];
-      inend += oplen;
-      prefixify_subexp (inexpr, outexpr, inend, outbeg);
-      outbeg += oplen;
-    }
-}
-\f
-/* This page contains the two entry points to this file.  */
-
-/* Read a C expression from the string *STRINGPTR points to,
-   parse it, and return a pointer to a  struct expression  that we malloc.
-   Use block BLOCK as the lexical context for variable names;
-   if BLOCK is zero, use the block of the selected stack frame.
-   Meanwhile, advance *STRINGPTR to point after the expression,
-   at the first nonwhite character that is not part of the expression
-   (possibly a null character).
-
-   If COMMA is nonzero, stop if a comma is reached.  */
-
-struct expression *
-parse_c_1 (stringptr, block, comma)
-     char **stringptr;
-     struct block *block;
-     int comma;
-{
-  struct cleanup *old_chain;
-
-  lexptr = *stringptr;
-
-  paren_depth = 0;
-  type_stack_depth = 0;
-
-  comma_terminates = comma;
-
-  if (lexptr == 0 || *lexptr == 0)
-    error_no_arg ("expression to compute");
-
-  old_chain = make_cleanup (free_funcalls, 0);
-  funcall_chain = 0;
-
-  expression_context_block = block ? block : get_selected_block ();
-
-  namecopy = (char *) alloca (strlen (lexptr) + 1);
-  expout_size = 10;
-  expout_ptr = 0;
-  expout = (struct expression *)
-    xmalloc (sizeof (struct expression)
-            + expout_size * sizeof (union exp_element));
-  make_cleanup (free_current_contents, &expout);
-  if (yyparse ())
-    yyerror (NULL);
-  discard_cleanups (old_chain);
-  expout->nelts = expout_ptr;
-  expout = (struct expression *)
-    xrealloc (expout,
-             sizeof (struct expression)
-             + expout_ptr * sizeof (union exp_element));
-  prefixify_expression (expout);
-  *stringptr = lexptr;
-  return expout;
-}
-
-/* Parse STRING as an expression, and complain if this fails
-   to use up all of the contents of STRING.  */
-
-struct expression *
-parse_c_expression (string)
-     char *string;
-{
-  register struct expression *exp;
-  exp = parse_c_1 (&string, 0, 0);
-  if (*string)
-    error ("Junk after end of expression.");
-  return exp;
-}
-
-static void 
-push_type (tp)
-     enum type_pieces tp;
-{
-  if (type_stack_depth == type_stack_size)
-    {
-      type_stack_size *= 2;
-      type_stack = (union type_stack_elt *)
-       xrealloc (type_stack, type_stack_size * sizeof (*type_stack));
-    }
-  type_stack[type_stack_depth++].piece = tp;
-}
-
-static void
-push_type_int (n)
-     int n;
-{
-  if (type_stack_depth == type_stack_size)
-    {
-      type_stack_size *= 2;
-      type_stack = (union type_stack_elt *)
-       xrealloc (type_stack, type_stack_size * sizeof (*type_stack));
-    }
-  type_stack[type_stack_depth++].int_val = n;
-}
-
-static enum type_pieces 
-pop_type ()
-{
-  if (type_stack_depth)
-    return type_stack[--type_stack_depth].piece;
-  return tp_end;
-}
-
-static int
-pop_type_int ()
-{
-  if (type_stack_depth)
-    return type_stack[--type_stack_depth].int_val;
-  /* "Can't happen".  */
-  return 0;
-}
-
-void
-_initialize_expread ()
-{
-  type_stack_size = 80;
-  type_stack_depth = 0;
-  type_stack = (union type_stack_elt *)
-    xmalloc (type_stack_size * sizeof (*type_stack));
-}
diff --git a/gdb/gdb-int.texinfo b/gdb/gdb-int.texinfo
deleted file mode 100755 (executable)
index cc1b188..0000000
+++ /dev/null
@@ -1,242 +0,0 @@
-\input texinfo
-@setfilename gdb-internals
-@ifinfo
-This file documents the internals of the GNU debugger GDB.
-
-Copyright (C) 1990, 1991 Free Software Foundation, Inc.
-Contributed by Cygnus Support.  Written by John Gilmore.
-
-Permission is granted to make and distribute verbatim copies of
-this manual provided the copyright notice and this permission notice
-are preserved on all copies.
-
-@ignore
-Permission is granted to process this file through Tex and print the
-results, provided the printed document carries copying permission
-notice identical to this one except for the removal of this paragraph
-(this paragraph not being relevant to the printed manual).
-
-@end ignore
-Permission is granted to copy or distribute modified versions of this
-manual under the terms of the GPL (for which purpose this text may be
-regarded as a program in the language TeX).
-@end ifinfo
-
-@setchapternewpage odd
-@settitle GDB Internals
-@titlepage
-@title{Working in GDB}
-@subtitle{A guide to the internals of the GNU debugger}
-@author John Gilmore
-@author Cygnus Support
-@page
-@tex
-\def\$#1${{#1}}  % Kluge: collect RCS revision info without $...$
-\xdef\manvers{\$Revision$}  % For use in headers, footers too
-{\parskip=0pt
-\hfill Cygnus Support\par
-\hfill \manvers\par
-\hfill \TeX{}info \texinfoversion\par
-}
-@end tex
-
-@vskip 0pt plus 1filll
-Copyright @copyright{} 1990, 1991 Free Software Foundation, Inc.
-
-Permission is granted to make and distribute verbatim copies of
-this manual provided the copyright notice and this permission notice
-are preserved on all copies.
-
-@end titlepage
-
-@node Top, Cleanups, (dir), (dir)
-
-@menu
-* Cleanups::                   Cleanups
-* Wrapping::                   Wrapping output lines
-* Releases::                   Configuring GDB for release
-* README::                     The README file
-* New Architectures::          Defining a new host or target architecture
-* Host versus Targt::          What features are in which files
-
-@end menu
-
-@node Cleanups, Wrapping, Top, Top
-@chapter Cleanups
-
-Cleanups are a structured way to deal with things that need to be done
-later.  When your code does something (like malloc some memory, or open
-a file) that needs to be undone later (e.g. free the memory or close
-the file), it can make a cleanup.  The cleanup will be done at some
-future point:  when the command is finished, when an error occurs, or
-when your code decides it's time to do cleanups.
-
-You can also discard cleanups, that is, throw them away without doing
-what they say.  This is only done if you ask that it be done.
-
-Syntax:
-
-@table @code
-@item old_chain = make_cleanup (function, arg);
-This makes a cleanup which will cause FUNCTION to be called with ARG
-(a char *) later.  The result, OLD_CHAIN, is a handle that can be
-passed to do_cleanups or discard_cleanups later.  Unless you are
-going to call do_cleanups or discard_cleanups yourself,
-you can ignore the result from make_cleanup.
-
-
-@item do_cleanups (old_chain);
-Performs all cleanups done since make_cleanup returned OLD_CHAIN.
-E.g.:   make_cleanup (a, 0); old = make_cleanup (b, 0); do_cleanups (old);
-will call b() but will not call a().  The cleanup that calls a() will remain
-in the cleanup chain, and will be done later unless otherwise discarded.
-
-@item discard_cleanups (old_chain);
-Same as do_cleanups except that it just removes the cleanups from the
-chain and does not call the specified functions.
-
-@end table
-
-Some functions, e.g. @code{fputs_filtered()} or @code{error()}, specify that they
-``should not be called when cleanups are not in place''.  This means
-that any actions you need to reverse in the case of an error or
-interruption must be on the cleanup chain before you call these functions,
-since they might never return to your code (they @samp{longjmp} instead).
-
-
-@node Wrapping, Releases, Cleanups, Top
-@chapter Wrapping output lines
-
-Output that goes through printf_filtered or fputs_filtered or
-fputs_demangled needs only to have calls to wrap_here() added 
-in places that would be good breaking points.  The utility routines
-will take care of actually wrapping if the line width is exceeded.
-
-The argument to wrap_here() is an indentation string which is printed
-ONLY if the line breaks there.  This argument is saved away and used
-later.  It must remain valid until the next call to wrap_here() or
-until a newline has been printed through the *_filtered functions.
-Don't pass in a local variable and then return!
-
-It is usually best to call wrap_here() after printing a comma or space.
-If you call it before printing a space, make sure that your indentation
-properly accounts for the leading space that will print if the line wraps
-there.
-
-Any function or set of functions that produce filtered output must finish
-by printing a newline, to flush the wrap buffer, before switching to
-unfiltered ("printf") output.  Symbol reading routines that print
-warnings are a good example.
-
-
-@node Releases, README, Wrapping, Top
-@chapter Configuring GDB for release
-
-
-GDB should be released after doing @samp{config.gdb none} in the top level
-directory.  This will leave a makefile there, but no tm- or xm- files.
-The makefile is needed, for example, for @samp{make gdb.tar.Z}@dots{}  If you
-have tm- or xm-files in the main source directory, C's include rules
-cause them to be used in preference to tm- and xm-files in the 
-subdirectories where the user will actually configure and build the
-binaries.
-
-@samp{config.gdb none} is also a good way to rebuild the top level Makefile
-after changing Makefile.dist, alldeps.mak, etc.
-
-
-
-@node README, New Architectures, Releases, Top
-@chapter The README file
-
-
-Check the README file, it often has useful information that does not
-appear anywhere else in the directory.
-
-
-
-@node New Architectures, Host versus Target, README, Top
-@chapter Defining a new host or target architecture
-
-
-When building support for a new host and/or target, this will help you
-organize where to put the various parts.  @var{ARCH} stands for the
-architecture involved.
-
-Object files needed when the host system is an @var{ARCH} are listed in
-the file @file{xconfig/@var{ARCH}}, in the Makefile macro @samp{XDEPFILES
-= }@dots{}.  You can also define XXXXXX in there.
-
-There are some ``generic'' versions of routines that can be used by
-various host systems.  If these routines work for the @var{ARCH} host,
-you can just include the generic file's name (with .o, not .c) in
-@code{XDEPFILES}.  Otherwise, you will need to write routines that
-perform the same functions as the generic file, put them into
-@code{@var{ARCH}-xdep.c}, and put @code{@var{ARCH}-xdep.o} into
-@code{XDEPFILES}.  These generic host support files include:
-
-@example
-       coredep.c, coredep.o
-@end example
-
-@table @code
-@item fetch_core_registers()
-Support for reading registers out of a core file.  This routine calls
-@code{register_addr(}), see below.
-
-@item register_addr()
-If your @code{xm-@var{ARCH}.h} file defines the macro @code{REGISTER_U_ADDR(reg)} to be the
-offset within the @samp{user} struct of a register (represented as a GDB
-register number), @file{coredep.c} will define the @code{register_addr()} function
-and use the macro in it.  If you do not define @code{REGISTER_U_ADDR}, but
-you are using the standard @code{fetch_core_registers}, you
-will need to define your own version of @code{register_addr}, put it into
-your @code{@var{ARCH}-xdep.c} file, and be sure @code{@var{ARCH}-xdep.o} is in the @code{XDEPFILES} list.
-If you have your own @code{fetch_core_registers}, you only need to define
-@code{register_addr} if your @code{fetch_core_registers} calls it.  Many custom
-@code{fetch_core_registers} implementations simply locate the registers
-themselves.
-@end table
-
-Files needed when the target system is an @var{ARCH} are listed in the file
-@file{tconfig/@var{ARCH}}, in the @code{Makefile} macro @samp{TDEPFILES = }@dots{}.  You can also
-define XXXXXX in there.
-
-Similar generic support files for target systems are:
-
-@example
-       exec.c, exec.o:
-@end example
-
-This file defines functions for accessing files that are executable
-on the target system.  These functions open and examine an exec file,
-extract data from one, write data to one, print information about one,
-etc.  Now that executable files are handled with BFD, every architecture
-should be able to use the generic exec.c rather than its own custom code.
-
-@node Host versus Target, , README, Top
-@chapter What is considered ``host-dependent'' versus ``target-dependent''?
-
-The xconfig/*, xm-*.h and *-xdep.c files are for host support.  The
-question is, what features or aspects of a debugging or cross-debugging
-environment are considered to be ``host'' support.
-
-Defines and include files needed to build on the host are host support.
-Examples are tty support, system defined types, host byte order, host
-float format.
-
-Unix child process support is considered an aspect of the host.  Since
-when you fork on the host you are still on the host, the various macros
-needed for finding the registers in the upage, running ptrace, and such
-are all in the host-dependent files.
-
-This is still somewhat of a grey area; I (John Gilmore) didn't do the
-xm- and tm- split for gdb (it was done by Jim Kingdon) so I have had to
-figure out the grounds on which it was split, and make my own choices
-as I evolve it.  I have moved many things out of the xdep files
-actually, partly as a result of BFD and partly by removing duplicated
-code.
-
-@contents
-@bye
-
diff --git a/gdb/getpagesize.h b/gdb/getpagesize.h
deleted file mode 100755 (executable)
index 32adae6..0000000
+++ /dev/null
@@ -1,25 +0,0 @@
-#ifdef BSD
-#ifndef BSD4_1
-#define HAVE_GETPAGESIZE
-#endif
-#endif
-
-#ifndef HAVE_GETPAGESIZE
-
-#include <sys/param.h>
-
-#ifdef EXEC_PAGESIZE
-#define getpagesize() EXEC_PAGESIZE
-#else
-#ifdef NBPG
-#define getpagesize() NBPG * CLSIZE
-#ifndef CLSIZE
-#define CLSIZE 1
-#endif /* no CLSIZE */
-#else /* no NBPG */
-#define getpagesize() NBPC
-#endif /* no NBPG */
-#endif /* no EXEC_PAGESIZE */
-
-#endif /* not HAVE_GETPAGESIZE */
-
diff --git a/gdb/gmalloc.c b/gdb/gmalloc.c
deleted file mode 100755 (executable)
index 8cbf4be..0000000
+++ /dev/null
@@ -1,1161 +0,0 @@
-
-/* gmalloc.c - THIS FILE IS AUTOMAGICALLY GENERATED SO DON'T EDIT IT. */
-
-/* Single-file skeleton for GNU malloc.
-   Copyright 1989 Free Software Foundation
-                 Written May 1989 by Mike Haertel.
-
-   The author may be reached (Email) at the address mike@ai.mit.edu,
-   or (US mail) as Mike Haertel c/o Free Software Foundation.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-#define __ONEFILE
-
-/* DO NOT DELETE THIS LINE -- ansidecl.h INSERTED HERE. */
-/* Copyright (C) 1989 Free Software Foundation, Inc.
-This file is part of the GNU C Library.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-/* ANSI and traditional C compatibility macros
-
-   ANSI C is assumed if __STDC__ is #defined.
-
-       Macros
-               PTR             - Generic pointer type
-               LONG_DOUBLE     - `long double' type
-               CONST           - `const' keyword
-               VOLATILE        - `volatile' keyword
-               SIGNED          - `signed' keyword
-               PTRCONST        - Generic const pointer (void *const)
-
-       EXFUN(name, prototype)          - declare external function NAME
-                                         with prototype PROTOTYPE
-       DEFUN(name, arglist, args)      - define function NAME with
-                                         args ARGLIST of types in ARGS
-       DEFUN_VOID(name)                - define function NAME with no args
-       AND                             - argument separator for ARGS
-       NOARGS                          - null arglist
-       DOTS                            - `...' in args
-
-    For example:
-       extern int EXFUN(printf, (CONST char *format DOTS));
-       int DEFUN(fprintf, (stream, format),
-                 FILE *stream AND CONST char *format DOTS) { ... }
-       void DEFUN_VOID(abort) { ... }
-*/
-
-#ifndef        _ANSIDECL_H
-
-#define        _ANSIDECL_H     1
-
-
-/* Every source file includes this file,
-   so they will all get the switch for lint.  */
-/* LINTLIBRARY */
-
-
-#ifdef __STDC__
-
-#define        PTR             void *
-#define        PTRCONST        void *CONST
-#define        LONG_DOUBLE     long double
-
-#define        AND             ,
-#define        NOARGS          void
-#define        CONST           const
-#define        VOLATILE        volatile
-#define        SIGNED          signed
-#define        DOTS            , ...
-
-#define        EXFUN(name, proto)              name proto
-#define        DEFUN(name, arglist, args)      name(args)
-#define        DEFUN_VOID(name)                name(NOARGS)
-
-#else  /* Not ANSI C.  */
-
-#define        PTR             char *
-#define        PTRCONST        PTR
-#define        LONG_DOUBLE     double
-
-#define        AND             ;
-#define        NOARGS
-#define        CONST
-#define        VOLATILE
-#define        SIGNED
-#define        DOTS
-
-#define        EXFUN(name, proto)              name()
-#define        DEFUN(name, arglist, args)      name arglist args;
-#define        DEFUN_VOID(name)                name()
-
-#endif /* ANSI C.  */
-
-
-#endif /* ansidecl.h   */
-
-#ifdef __STDC__
-#include <limits.h>
-#else
-/* DO NOT DELETE THIS LINE -- limits.h INSERTED HERE. */
-/* Number of bits in a `char'.  */
-#define CHAR_BIT 8
-
-/* No multibyte characters supported yet.  */
-#define MB_LEN_MAX 1
-
-/* Minimum and maximum values a `signed char' can hold.  */
-#define SCHAR_MIN -128
-#define SCHAR_MAX 127
-
-/* Maximum value an `unsigned char' can hold.  (Minimum is 0).  */
-#define UCHAR_MAX 255U
-
-/* Minimum and maximum values a `char' can hold.  */
-#ifdef __CHAR_UNSIGNED__
-#define CHAR_MIN 0
-#define CHAR_MAX 255U
-#else
-#define CHAR_MIN -128
-#define CHAR_MAX 127
-#endif
-
-/* Minimum and maximum values a `signed short int' can hold.  */
-#define SHRT_MIN -32768
-#define SHRT_MAX 32767
-
-/* Maximum value an `unsigned short int' can hold.  (Minimum is 0).  */
-#define USHRT_MAX 65535U
-
-/* Minimum and maximum values a `signed int' can hold.  */
-#define INT_MIN -2147483648
-#define INT_MAX 2147483647
-
-/* Maximum value an `unsigned int' can hold.  (Minimum is 0).  */
-#define UINT_MAX 4294967295U
-
-/* Minimum and maximum values a `signed long int' can hold.
-   (Same as `int').  */
-#define LONG_MIN (-LONG_MAX-1)
-#define LONG_MAX 2147483647
-
-/* Maximum value an `unsigned long int' can hold.  (Minimum is 0).  */
-#define ULONG_MAX 4294967295U
-#endif
-
-#ifdef __STDC__
-#include <stddef.h>
-#else
-/* DO NOT DELETE THIS LINE -- stddef.h INSERTED HERE. */
-#ifndef _STDDEF_H
-#define _STDDEF_H
-
-/* Signed type of difference of two pointers.  */
-
-typedef long ptrdiff_t;
-
-/* Unsigned type of `sizeof' something.  */
-
-#ifndef _SIZE_T        /* in case <sys/types.h> has defined it. */
-#define _SIZE_T
-typedef unsigned long size_t;
-#endif /* _SIZE_T */
-
-/* A null pointer constant.  */
-
-#undef NULL            /* in case <stdio.h> has defined it. */
-#define NULL 0
-
-/* Offset of member MEMBER in a struct of type TYPE.  */
-
-#define offsetof(TYPE, MEMBER) ((size_t) &((TYPE *)0)->MEMBER)
-
-#endif /* _STDDEF_H */
-#endif
-
-/* DO NOT DELETE THIS LINE -- stdlib.h INSERTED HERE. */
-/* Fake stdlib.h supplying the stuff needed by malloc. */
-
-#ifndef __ONEFILE
-#include <stddef.h>
-#endif
-
-extern void EXFUN(abort, (NOARGS));
-extern void EXFUN(free, (PTR));
-extern PTR EXFUN(malloc, (size_t));
-extern PTR EXFUN(realloc, (PTR, size_t));
-
-/* DO NOT DELETE THIS LINE -- string.h INSERTED HERE. */
-/* Fake string.h supplying stuff used by malloc. */
-#ifndef __ONEFILE
-#include <stddef.h>
-#endif
-
-extern PTR EXFUN(memcpy, (PTR, CONST PTR, size_t));
-extern PTR EXFUN(memset, (PTR, int, size_t));
-#define memmove memcpy
-
-#define _MALLOC_INTERNAL
-/* DO NOT DELETE THIS LINE -- malloc.h INSERTED HERE. */
-/* Declarations for `malloc' and friends.
-   Copyright 1990 Free Software Foundation
-                 Written May 1989 by Mike Haertel.
-
-   The author may be reached (Email) at the address mike@ai.mit.edu,
-   or (US mail) as Mike Haertel c/o Free Software Foundation.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-#ifndef _MALLOC_H
-
-#define _MALLOC_H      1
-
-#ifndef __ONEFILE
-#define        __need_NULL
-#define        __need_size_t
-#define __need_ptrdiff_t
-#include <stddef.h>
-#endif
-
-#ifdef _MALLOC_INTERNAL
-
-#ifndef __ONEFILE
-#include <limits.h>
-#endif
-
-/* The allocator divides the heap into blocks of fixed size; large
-   requests receive one or more whole blocks, and small requests
-   receive a fragment of a block.  Fragment sizes are powers of two,
-   and all fragments of a block are the same size.  When all the
-   fragments in a block have been freed, the block itself is freed.  */
-#define INT_BIT                (CHAR_BIT * sizeof(int))
-#define BLOCKLOG       (INT_BIT > 16 ? 12 : 9)
-#define BLOCKSIZE      ((unsigned int) 1 << BLOCKLOG)
-#define BLOCKIFY(SIZE) (((SIZE) + BLOCKSIZE - 1) / BLOCKSIZE)
-
-/* The difference between two pointers is a signed int.  On machines where
-   the data addresses have the high bit set, we need to ensure that the
-   difference becomes an unsigned int when we are using the address as an
-   integral value.  In addition, when using with the '%' operator, the
-   sign of the result is machine dependent for negative values, so force
-   it to be treated as an unsigned int. */
-
-#define ADDR2UINT(addr)        ((unsigned int) ((char *) (addr) - (char *) NULL))
-#define RESIDUAL(addr) ((unsigned int) (ADDR2UINT (addr) % BLOCKSIZE))
-
-/* Determine the amount of memory spanned by the initial heap table
-   (not an absolute limit).  */
-#define HEAP           (INT_BIT > 16 ? 4194304 : 65536)
-
-/* Number of contiguous free blocks allowed to build up at the end of
-   memory before they will be returned to the system.  */
-#define FINAL_FREE_BLOCKS      8
-
-/* Where to start searching the free list when looking for new memory.
-   The two possible values are 0 and _heapindex.  Starting at 0 seems
-   to reduce total memory usage, while starting at _heapindex seems to
-   run faster.  */
-#define MALLOC_SEARCH_START    _heapindex
-
-/* Data structure giving per-block information.  */
-typedef union
-  {
-    /* Heap information for a busy block.  */
-    struct
-      {
-       /* Zero for a large block, or positive giving the
-          logarithm to the base two of the fragment size.  */
-       int type;
-       union
-         {
-           struct
-             {
-               size_t nfree;   /* Free fragments in a fragmented block.  */
-               size_t first;   /* First free fragment of the block.  */
-             } frag;
-           /* Size (in blocks) of a large cluster.  */
-           size_t size;
-         } info;
-      } busy;
-    /* Heap information for a free block (that may be the first of
-       a free cluster).  */
-    struct
-      {
-       size_t size;            /* Size (in blocks) of a free cluster.  */
-       size_t next;            /* Index of next free cluster.  */
-       size_t prev;            /* Index of previous free cluster.  */
-      } free;
-  } malloc_info;
-
-/* Pointer to first block of the heap.  */
-extern char *_heapbase;
-
-/* Table indexed by block number giving per-block information.  */
-extern malloc_info *_heapinfo;
-
-/* Address to block number and vice versa.  */
-#define BLOCK(A) (((char *) (A) - _heapbase) / BLOCKSIZE + 1)
-#define ADDRESS(B) ((PTR) (((B) - 1) * BLOCKSIZE + _heapbase))
-
-/* Current search index for the heap table.  */
-extern size_t _heapindex;
-
-/* Limit of valid info table indices.  */
-extern size_t _heaplimit;
-
-/* Doubly linked lists of free fragments.  */
-struct list
-  {
-    struct list *next;
-    struct list *prev;
-  };
-
-/* Free list headers for each fragment size.  */
-extern struct list _fraghead[];
-
-/* Instrumentation.  */
-extern size_t _chunks_used;
-extern size_t _bytes_used;
-extern size_t _chunks_free;
-extern size_t _bytes_free;
-
-/* Internal version of free() used in morecore(). */
-extern void EXFUN(__free, (PTR __ptr));
-
-#endif  /* _MALLOC_INTERNAL.  */
-
-/* Underlying allocation function; successive calls should
-   return contiguous pieces of memory.  */
-extern PTR EXFUN((*__morecore), (ptrdiff_t __size));
-
-/* Default value of previous.  */
-extern PTR EXFUN(__default_morecore, (ptrdiff_t __size));
-
-/* Flag whether malloc has been called.  */
-extern int __malloc_initialized;
-
-/* Hooks for debugging versions.  */
-extern void EXFUN((*__free_hook), (PTR __ptr));
-extern PTR EXFUN((*__malloc_hook), (size_t __size));
-extern PTR EXFUN((*__realloc_hook), (PTR __ptr, size_t __size));
-
-/* Activate a standard collection of debugging hooks.  */
-extern void EXFUN(mcheck, (void EXFUN((*func), (NOARGS))));
-
-/* Statistics available to the user.  */
-struct mstats
-  {
-    size_t bytes_total;                /* Total size of the heap. */
-    size_t chunks_used;                /* Chunks allocated by the user. */
-    size_t bytes_used;         /* Byte total of user-allocated chunks. */
-    size_t chunks_free;                /* Chunks in the free list. */
-    size_t bytes_free;         /* Byte total of chunks in the free list. */
-  };
-
-/* Pick up the current statistics. */
-extern struct mstats EXFUN(mstats, (NOARGS));
-
-#endif /* malloc.h  */
-
-/* DO NOT DELETE THIS LINE -- free.c INSERTED HERE. */
-/* Free a block of memory allocated by `malloc'.
-   Copyright 1990 Free Software Foundation
-                 Written May 1989 by Mike Haertel.
-
-   The author may be reached (Email) at the address mike@ai.mit.edu,
-   or (US mail) as Mike Haertel c/o Free Software Foundation.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-#ifndef __ONEFILE
-#include "ansidecl.h"
-#include <stddef.h>
-#include <stdlib.h>
-
-#define _MALLOC_INTERNAL
-#include "malloc.h"
-#endif /* __ONEFILE */
-
-/* Debugging hook for free.  */
-void EXFUN((*__free_hook), (PTR __ptr));
-
-/* Return memory to the heap.  Like free() but don't call a __free_hook
-   if there is one.  */
-void
-DEFUN(__free, (ptr), PTR ptr)
-{
-  int type;
-  size_t block, blocks;
-  register size_t i;
-  struct list *prev, *next;
-
-  block = BLOCK(ptr);
-
-  type = _heapinfo[block].busy.type;
-  switch (type)
-    {
-    case 0:
-      /* Get as many statistics as early as we can.  */
-      --_chunks_used;
-      _bytes_used -= _heapinfo[block].busy.info.size * BLOCKSIZE;
-      _bytes_free += _heapinfo[block].busy.info.size * BLOCKSIZE;
-
-      /* Find the free cluster previous to this one in the free list.
-        Start searching at the last block referenced; this may benefit
-        programs with locality of allocation.  */
-      i = _heapindex;
-      if (i > block)
-       while (i > block)
-         i = _heapinfo[i].free.prev;
-      else
-       {
-         do
-           i = _heapinfo[i].free.next;
-         while (i > 0 && i < block);
-         i = _heapinfo[i].free.prev;
-       }
-
-      /* Determine how to link this block into the free list.  */
-      if (block == i + _heapinfo[i].free.size)
-       {
-         /* Coalesce this block with its predecessor.  */
-         _heapinfo[i].free.size += _heapinfo[block].busy.info.size;
-         block = i;
-       }
-      else
-       {
-         /* Really link this block back into the free list.  */
-         _heapinfo[block].free.size = _heapinfo[block].busy.info.size;
-         _heapinfo[block].free.next = _heapinfo[i].free.next;
-         _heapinfo[block].free.prev = i;
-         _heapinfo[i].free.next = block;
-         _heapinfo[_heapinfo[block].free.next].free.prev = block;
-         ++_chunks_free;
-       }
-
-      /* Now that the block is linked in, see if we can coalesce it
-        with its successor (by deleting its successor from the list
-        and adding in its size).  */
-      if (block + _heapinfo[block].free.size == _heapinfo[block].free.next)
-       {
-         _heapinfo[block].free.size
-           += _heapinfo[_heapinfo[block].free.next].free.size;
-         _heapinfo[block].free.next
-           = _heapinfo[_heapinfo[block].free.next].free.next;
-         _heapinfo[_heapinfo[block].free.next].free.prev = block;
-         --_chunks_free;
-       }
-
-      /* Now see if we can return stuff to the system.  */
-      blocks = _heapinfo[block].free.size;
-      if (blocks >= FINAL_FREE_BLOCKS && block + blocks == _heaplimit
-         && (*__morecore)(0) == ADDRESS(block + blocks))
-       {
-         register size_t bytes = blocks * BLOCKSIZE;
-         _heaplimit -= blocks;
-         (*__morecore)(- bytes);
-         _heapinfo[_heapinfo[block].free.prev].free.next
-           = _heapinfo[block].free.next;
-         _heapinfo[_heapinfo[block].free.next].free.prev
-           = _heapinfo[block].free.prev;
-         block = _heapinfo[block].free.prev;
-         --_chunks_free;
-         _bytes_free -= bytes;
-       }
-
-      /* Set the next search to begin at this block.  */
-      _heapindex = block;
-      break;
-
-    default:
-      /* Do some of the statistics.  */
-      --_chunks_used;
-      _bytes_used -= 1 << type;
-      ++_chunks_free;
-      _bytes_free += 1 << type;
-
-      /* Get the address of the first free fragment in this block.  */
-      prev = (struct list *) ((char *) ADDRESS(block) +
-                             (_heapinfo[block].busy.info.frag.first << type));
-
-      if (_heapinfo[block].busy.info.frag.nfree == (BLOCKSIZE >> type) - 1)
-       {
-         /* If all fragments of this block are free, remove them
-            from the fragment list and free the whole block.  */
-         next = prev;
-         for (i = 1; i < BLOCKSIZE >> type; ++i)
-           next = next->next;
-         prev->prev->next = next;
-         if (next != NULL)
-           next->prev = prev->prev;
-         _heapinfo[block].busy.type = 0;
-         _heapinfo[block].busy.info.size = 1;
-
-         /* Keep the statistics accurate.  */
-         ++_chunks_used;
-         _bytes_used += BLOCKSIZE;
-         _chunks_free -= BLOCKSIZE >> type;
-         _bytes_free -= BLOCKSIZE;
-
-         free(ADDRESS(block));
-       }
-      else if (_heapinfo[block].busy.info.frag.nfree != 0)
-       {
-         /* If some fragments of this block are free, link this
-            fragment into the fragment list after the first free
-            fragment of this block. */
-         next = (struct list *) ptr;
-         next->next = prev->next;
-         next->prev = prev;
-         prev->next = next;
-         if (next->next != NULL)
-           next->next->prev = next;
-         ++_heapinfo[block].busy.info.frag.nfree;
-       }
-      else
-       {
-         /* No fragments of this block are free, so link this
-            fragment into the fragment list and announce that
-            it is the first free fragment of this block. */
-         prev = (struct list *) ptr;
-         _heapinfo[block].busy.info.frag.nfree = 1;
-         _heapinfo[block].busy.info.frag.first = RESIDUAL (ptr) >> type;
-         prev->next = _fraghead[type].next;
-         prev->prev = &_fraghead[type];
-         prev->prev->next = prev;
-         if (prev->next != NULL)
-           prev->next->prev = prev;
-       }
-      break;
-    }
-}
-
-/* Return memory to the heap.  */
-void
-DEFUN(free, (ptr), PTR ptr)
-{
-  if (ptr == NULL)
-    return;
-
-  if (__free_hook != NULL)
-    (*__free_hook)(ptr);
-  else
-    __free (ptr);
-}
-
-/* DO NOT DELETE THIS LINE -- malloc.c INSERTED HERE. */
-/* Memory allocator `malloc'.
-   Copyright 1990 Free Software Foundation
-                 Written May 1989 by Mike Haertel.
-
-   The author may be reached (Email) at the address mike@ai.mit.edu,
-   or (US mail) as Mike Haertel c/o Free Software Foundation.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-#ifndef __ONEFILE
-#include "ansidecl.h"
-#include <stddef.h>
-#include <stdlib.h>
-#include <string.h>
-
-#define _MALLOC_INTERNAL
-#include "malloc.h"
-#endif /* __ONEFILE */
-
-/* How to really get more memory.  */
-PTR EXFUN((*__morecore), (ptrdiff_t __size)) = __default_morecore;
-
-/* Debugging hook for `malloc'.  */
-PTR EXFUN((*__malloc_hook), (size_t __size));
-
-/* Pointer to the base of the first block.  */
-char *_heapbase;
-
-/* Block information table.  Allocated with align/__free (not malloc/free).  */
-malloc_info *_heapinfo;
-
-/* Number of info entries.  */
-static size_t heapsize;
-
-/* Search index in the info table.  */
-size_t _heapindex;
-
-/* Limit of valid info table indices.  */
-size_t _heaplimit;
-
-/* Free lists for each fragment size.  */
-struct list _fraghead[BLOCKLOG];
-
-/* Instrumentation.  */
-size_t _chunks_used;
-size_t _bytes_used;
-size_t _chunks_free;
-size_t _bytes_free;
-
-/* Are you experienced?  */
-int __malloc_initialized;
-
-/* Aligned allocation.  */
-static PTR
-DEFUN(align, (size), size_t size)
-{
-  PTR result;
-  unsigned int adj;
-
-  result = (*__morecore)(size);
-  adj = RESIDUAL (result);
-  if (adj != 0)
-    {
-      adj = BLOCKSIZE - adj;
-      (void) (*__morecore)(adj);
-      result = (char *) result + adj;
-    }
-  return result;
-}
-
-/* Set everything up and remember that we have.  */
-static int
-DEFUN_VOID(initialize)
-{
-  heapsize = HEAP / BLOCKSIZE;
-  _heapinfo = (malloc_info *) align(heapsize * sizeof(malloc_info));
-  if (_heapinfo == NULL)
-    return 0;
-  memset(_heapinfo, 0, heapsize * sizeof(malloc_info));
-  _heapinfo[0].free.size = 0;
-  _heapinfo[0].free.next = _heapinfo[0].free.prev = 0;
-  _heapindex = 0;
-  _heapbase = (char *) _heapinfo;
-  __malloc_initialized = 1;
-  return 1;
-}
-
-/* Get neatly aligned memory, initializing or
-   growing the heap info table as necessary. */
-static PTR
-DEFUN(morecore, (size), size_t size)
-{
-  PTR result;
-  malloc_info *newinfo, *oldinfo;
-  size_t newsize;
-
-  result = align(size);
-  if (result == NULL)
-    return NULL;
-
-  /* Check if we need to grow the info table.  */
-  if (BLOCK((char *) result + size) > heapsize)
-    {
-      newsize = heapsize;
-      while (BLOCK((char *) result + size) > newsize)
-       newsize *= 2;
-      newinfo = (malloc_info *) align(newsize * sizeof(malloc_info));
-      if (newinfo == NULL)
-       {
-         (*__morecore)(- size);
-         return NULL;
-       }
-      memset(newinfo, 0, newsize * sizeof(malloc_info));
-      memcpy(newinfo, _heapinfo, heapsize * sizeof(malloc_info));
-      oldinfo = _heapinfo;
-      newinfo[BLOCK(oldinfo)].busy.type = 0;
-      newinfo[BLOCK(oldinfo)].busy.info.size
-       = BLOCKIFY(heapsize * sizeof(malloc_info));
-      _heapinfo = newinfo;
-      __free(oldinfo);
-      heapsize = newsize;
-    }
-
-  _heaplimit = BLOCK((char *) result + size);
-  return result;
-}
-
-/* Allocate memory from the heap.  */
-PTR
-DEFUN(malloc, (size), size_t size)
-{
-  PTR result;
-  size_t block, blocks, lastblocks, start;
-  register size_t i;
-  struct list *next;
-
-  if (size == 0)
-    return NULL;
-
-  if (__malloc_hook != NULL)
-    return (*__malloc_hook)(size);
-
-  if (!__malloc_initialized)
-    if (!initialize())
-      return NULL;
-
-  if (size < sizeof(struct list))
-    size = sizeof(struct list);
-
-  /* Determine the allocation policy based on the request size.  */
-  if (size <= BLOCKSIZE / 2)
-    {
-      /* Small allocation to receive a fragment of a block.
-        Determine the logarithm to base two of the fragment size. */
-      register size_t log = 1;
-      --size;
-      while ((size /= 2) != 0)
-       ++log;
-
-      /* Look in the fragment lists for a
-        free fragment of the desired size. */
-      next = _fraghead[log].next;
-      if (next != NULL)
-       {
-         /* There are free fragments of this size.
-            Pop a fragment out of the fragment list and return it.
-            Update the block's nfree and first counters. */
-         result = (PTR) next;
-         next->prev->next = next->next;
-         if (next->next != NULL)
-           next->next->prev = next->prev;
-         block = BLOCK(result);
-         if (--_heapinfo[block].busy.info.frag.nfree != 0)
-           _heapinfo[block].busy.info.frag.first =
-             RESIDUAL (next->next) >> log;
-
-         /* Update the statistics.  */
-         ++_chunks_used;
-         _bytes_used += 1 << log;
-         --_chunks_free;
-         _bytes_free -= 1 << log;
-       }
-      else
-       {
-         /* No free fragments of the desired size, so get a new block
-            and break it into fragments, returning the first.  */
-         result = malloc(BLOCKSIZE);
-         if (result == NULL)
-           return NULL;
-
-         /* Link all fragments but the first into the free list.  */
-         for (i = 1; i < BLOCKSIZE >> log; ++i)
-           {
-             next = (struct list *) ((char *) result + (i << log));
-             next->next = _fraghead[log].next;
-             next->prev = &_fraghead[log];
-             next->prev->next = next;
-             if (next->next != NULL)
-               next->next->prev = next;
-           }
-
-         /* Initialize the nfree and first counters for this block.  */
-         block = BLOCK(result);
-         _heapinfo[block].busy.type = log;
-         _heapinfo[block].busy.info.frag.nfree = i - 1;
-         _heapinfo[block].busy.info.frag.first = i - 1;
-
-         _chunks_free += (BLOCKSIZE >> log) - 1;
-         _bytes_free += BLOCKSIZE - (1 << log);
-       }
-    }
-  else
-    {
-      /* Large allocation to receive one or more blocks.
-        Search the free list in a circle starting at the last place visited.
-        If we loop completely around without finding a large enough
-        space we will have to get more memory from the system.  */
-      blocks = BLOCKIFY(size);
-      start = block = MALLOC_SEARCH_START;
-      while (_heapinfo[block].free.size < blocks)
-       {
-         block = _heapinfo[block].free.next;
-         if (block == start)
-           {
-             /* Need to get more from the system.  Check to see if
-                the new core will be contiguous with the final free
-                block; if so we don't need to get as much.  */
-             block = _heapinfo[0].free.prev;
-             lastblocks = _heapinfo[block].free.size;
-             if (_heaplimit != 0 && block + lastblocks == _heaplimit &&
-                 (*__morecore)(0) == ADDRESS(block + lastblocks) &&
-                 (morecore((blocks - lastblocks) * BLOCKSIZE)) != NULL)
-               {
-                 _heapinfo[block].free.size = blocks;
-                 _bytes_free += (blocks - lastblocks) * BLOCKSIZE;
-                 continue;
-               }
-             result = morecore(blocks * BLOCKSIZE);
-             if (result == NULL)
-               return NULL;
-             block = BLOCK(result);
-             _heapinfo[block].busy.type = 0;
-             _heapinfo[block].busy.info.size = blocks;
-             ++_chunks_used;
-             _bytes_used += blocks * BLOCKSIZE;
-             return result;
-           }
-       }
-
-      /* At this point we have found a suitable free list entry.
-        Figure out how to remove what we need from the list. */
-      result = ADDRESS(block);
-      if (_heapinfo[block].free.size > blocks)
-       {
-         /* The block we found has a bit left over,
-            so relink the tail end back into the free list. */
-         _heapinfo[block + blocks].free.size
-           = _heapinfo[block].free.size - blocks;
-         _heapinfo[block + blocks].free.next
-           = _heapinfo[block].free.next;
-         _heapinfo[block + blocks].free.prev
-           = _heapinfo[block].free.prev;
-         _heapinfo[_heapinfo[block].free.prev].free.next
-           = _heapinfo[_heapinfo[block].free.next].free.prev
-             = _heapindex = block + blocks;
-       }
-      else
-       {
-         /* The block exactly matches our requirements,
-            so just remove it from the list. */
-         _heapinfo[_heapinfo[block].free.next].free.prev
-           = _heapinfo[block].free.prev;
-         _heapinfo[_heapinfo[block].free.prev].free.next
-           = _heapindex = _heapinfo[block].free.next;
-         --_chunks_free;
-       }
-
-      _heapinfo[block].busy.type = 0;
-      _heapinfo[block].busy.info.size = blocks;
-      ++_chunks_used;
-      _bytes_used += blocks * BLOCKSIZE;
-      _bytes_free -= blocks * BLOCKSIZE;
-    }
-
-  return result;
-}
-
-/* DO NOT DELETE THIS LINE -- realloc.c INSERTED HERE. */
-/* Change the size of a block allocated by `malloc'.
-   Copyright 1990 Free Software Foundation
-                 Written May 1989 by Mike Haertel.
-
-   The author may be reached (Email) at the address mike@ai.mit.edu,
-   or (US mail) as Mike Haertel c/o Free Software Foundation.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-#ifndef __ONEFILE
-#include "ansidecl.h"
-#include <stdlib.h>
-#include <string.h>
-
-#define _MALLOC_INTERNAL
-#include "malloc.h"
-#endif /* __ONEFILE */
-
-#define MIN(A, B) ((A) < (B) ? (A) : (B))
-
-/* Debugging hook for realloc.  */
-PTR EXFUN((*__realloc_hook), (PTR __ptr, size_t __size));
-
-/* Resize the given region to the new size, returning a pointer
-   to the (possibly moved) region.  This is optimized for speed;
-   some benchmarks seem to indicate that greater compactness is
-   achieved by unconditionally allocating and copying to a
-   new region.  This module has incestuous knowledge of the
-   internals of both free and malloc. */
-PTR
-DEFUN(realloc, (ptr, size), PTR ptr AND size_t size)
-{
-  PTR result;
-  int type;
-  size_t block, blocks, oldlimit;
-
-  if (size == 0)
-    {
-      free(ptr);
-      return NULL;
-    }
-  else if (ptr == NULL)
-    return malloc(size);
-
-  if (__realloc_hook != NULL)
-    return (*__realloc_hook)(ptr, size);
-
-  block = BLOCK(ptr);
-
-  type = _heapinfo[block].busy.type;
-  switch (type)
-    {
-    case 0:
-      /* Maybe reallocate a large block to a small fragment.  */
-      if (size <= BLOCKSIZE / 2)
-       {
-         result = malloc(size);
-         if (result != NULL)
-           {
-             memcpy(result, ptr, size);
-             free(ptr);
-             return result;
-           }
-       }
-
-      /* The new size is a large allocation as well;
-        see if we can hold it in place. */
-      blocks = BLOCKIFY(size);
-      if (blocks < _heapinfo[block].busy.info.size)
-       {
-         /* The new size is smaller; return
-            excess memory to the free list. */
-         _heapinfo[block + blocks].busy.type = 0;
-         _heapinfo[block + blocks].busy.info.size
-           = _heapinfo[block].busy.info.size - blocks;
-         _heapinfo[block].busy.info.size = blocks;
-         free(ADDRESS(block + blocks));
-         result = ptr;
-       }
-      else if (blocks == _heapinfo[block].busy.info.size)
-       /* No size change necessary.  */
-       result = ptr;
-      else
-       {
-         /* Won't fit, so allocate a new region that will.
-            Free the old region first in case there is sufficient
-            adjacent free space to grow without moving. */
-         blocks = _heapinfo[block].busy.info.size;
-         /* Prevent free from actually returning memory to the system.  */
-         oldlimit = _heaplimit;
-         _heaplimit = 0;
-         free(ptr);
-         _heaplimit = oldlimit;
-         result = malloc(size);
-         if (result == NULL)
-           {
-             (void) malloc(blocks * BLOCKSIZE);
-             return NULL;
-           }
-         if (ptr != result)
-           memmove(result, ptr, blocks * BLOCKSIZE);
-       }
-      break;
-
-    default:
-      /* Old size is a fragment; type is logarithm
-        to base two of the fragment size.  */
-      if (size > 1 << (type - 1) && size <= 1 << type)
-       /* The new size is the same kind of fragment.  */
-       result = ptr;
-      else
-       {
-         /* The new size is different; allocate a new space,
-            and copy the lesser of the new size and the old. */
-         result = malloc(size);
-         if (result == NULL)
-           return NULL;
-         memcpy(result, ptr, MIN(size, 1 << type));
-         free(ptr);
-       }
-      break;
-    }
-
-  return result;
-}
-
-/* DO NOT DELETE THIS LINE -- unix.c INSERTED HERE. */
-/* unix.c - get more memory with a UNIX system call.
-   Copyright 1990 Free Software Foundation
-                 Written May 1989 by Mike Haertel.
-
-   The author may be reached (Email) at the address mike@ai.mit.edu,
-   or (US mail) as Mike Haertel c/o Free Software Foundation.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-#ifndef __ONEFILE
-#include "ansidecl.h"
-#include <stddef.h>
-
-#define _MALLOC_INTERNAL
-#include "malloc.h"
-#endif /* __ONEFILE */
-
-extern PTR EXFUN(sbrk, (ptrdiff_t size));
-
-PTR
-DEFUN(__default_morecore, (size), ptrdiff_t size)
-{
-  PTR result;
-
-  result = sbrk(size);
-  if (result == (PTR) -1)
-    return NULL;
-  return result;
-}
-
-#define __getpagesize getpagesize
-/* DO NOT DELETE THIS LINE -- valloc.c INSERTED HERE. */
-/* Allocate memory on a page boundary.
-   Copyright 1990 Free Software Foundation
-                 Written May 1989 by Mike Haertel.
-
-   The author may be reached (Email) at the address mike@ai.mit.edu,
-   or (US mail) as Mike Haertel c/o Free Software Foundation.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-#ifndef __ONEFILE
-#include "ansidecl.h"
-#include <stdlib.h>
-#endif /* __ONEFILE */
-
-#if defined(M_UNIX)
-/*
- * M_UNIX is defined by the SCO compilers, including the port of gcc.
- */
-
-/* On SunOS 4.1.1, <sys/param.h> typedefs size_t, which is bad since
-   we typedef it above.  Maybe it's better just to have people compile
-   -Dgetpagesize()=4096.  */
-/* Deal with page size.  */
-#ifndef HAVE_GETPAGESIZE
-
-#include <sys/param.h>
-
-#if !defined (PAGESIZE)
-#ifdef EXEC_PAGESIZE
-#define PAGESIZE EXEC_PAGESIZE
-#else
-#ifdef NBPG
-#define PAGESIZE NBPG * CLSIZE
-#ifndef CLSIZE
-#define CLSIZE 1
-#endif /* no CLSIZE */
-#else /* no NBPG */
-#define PAGESIZE NBPC
-#endif /* no NBPG */
-#endif /* no EXEC_PAGESIZE */
-#endif /* no PAGESIZE */
-
-size_t
-DEFUN_VOID(__getpagesize)
-{
-  return PAGESIZE;
-}
-#endif /* not HAVE_GETPAGESIZE */
-#endif /* M_UNIX */
-
-extern size_t EXFUN(__getpagesize, (NOARGS));
-
-static size_t pagesize;
-
-PTR
-DEFUN(valloc, (size), size_t size)
-{
-  PTR result;
-  unsigned int adj;
-
-  if (pagesize == 0)
-    pagesize = __getpagesize();
-
-  result = malloc(size + pagesize);
-  if (result == NULL)
-    return NULL;
-  adj = (unsigned int) ((unsigned int)((char *) result - (char *) NULL)) % pagesize;
-  if (adj != 0)
-    result = (char *) result + pagesize - adj;
-  return result;
-}
diff --git a/gdb/gmalloc.h b/gdb/gmalloc.h
deleted file mode 100755 (executable)
index b52db6d..0000000
+++ /dev/null
@@ -1,161 +0,0 @@
-/* Declarations for `malloc' and friends.
-   Copyright 1990 Free Software Foundation
-                 Written May 1989 by Mike Haertel.
-
-   The author may be reached (Email) at the address mike@ai.mit.edu,
-   or (US mail) as Mike Haertel c/o Free Software Foundation.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-#ifndef _MALLOC_H
-
-#define _MALLOC_H      1
-
-#ifndef __ONEFILE
-#define        __need_NULL
-#define        __need_size_t
-#define __need_ptrdiff_t
-#include <stddef.h>
-#endif
-
-#ifdef _MALLOC_INTERNAL
-
-#ifndef __ONEFILE
-#include <limits.h>
-#endif
-
-/* The allocator divides the heap into blocks of fixed size; large
-   requests receive one or more whole blocks, and small requests
-   receive a fragment of a block.  Fragment sizes are powers of two,
-   and all fragments of a block are the same size.  When all the
-   fragments in a block have been freed, the block itself is freed.  */
-#define INT_BIT                (CHAR_BIT * sizeof(int))
-#define BLOCKLOG       (INT_BIT > 16 ? 12 : 9)
-#define BLOCKSIZE      (1 << BLOCKLOG)
-#define BLOCKIFY(SIZE) (((SIZE) + BLOCKSIZE - 1) / BLOCKSIZE)
-
-/* Determine the amount of memory spanned by the initial heap table
-   (not an absolute limit).  */
-#define HEAP           (INT_BIT > 16 ? 4194304 : 65536)
-
-/* Number of contiguous free blocks allowed to build up at the end of
-   memory before they will be returned to the system.  */
-#define FINAL_FREE_BLOCKS      8
-
-/* Where to start searching the free list when looking for new memory.
-   The two possible values are 0 and _heapindex.  Starting at 0 seems
-   to reduce total memory usage, while starting at _heapindex seems to
-   run faster.  */
-#define MALLOC_SEARCH_START    _heapindex
-
-/* Data structure giving per-block information.  */
-typedef union
-  {
-    /* Heap information for a busy block.  */
-    struct
-      {
-       /* Zero for a large block, or positive giving the
-          logarithm to the base two of the fragment size.  */
-       int type;
-       union
-         {
-           struct
-             {
-               size_t nfree;   /* Free fragments in a fragmented block.  */
-               size_t first;   /* First free fragment of the block.  */
-             } frag;
-           /* Size (in blocks) of a large cluster.  */
-           size_t size;
-         } info;
-      } busy;
-    /* Heap information for a free block (that may be the first of
-       a free cluster).  */
-    struct
-      {
-       size_t size;            /* Size (in blocks) of a free cluster.  */
-       size_t next;            /* Index of next free cluster.  */
-       size_t prev;            /* Index of previous free cluster.  */
-      } free;
-  } malloc_info;
-
-/* Pointer to first block of the heap.  */
-extern char *_heapbase;
-
-/* Table indexed by block number giving per-block information.  */
-extern malloc_info *_heapinfo;
-
-/* Address to block number and vice versa.  */
-#define BLOCK(A) (((char *) (A) - _heapbase) / BLOCKSIZE + 1)
-#define ADDRESS(B) ((PTR) (((B) - 1) * BLOCKSIZE + _heapbase))
-
-/* Current search index for the heap table.  */
-extern size_t _heapindex;
-
-/* Limit of valid info table indices.  */
-extern size_t _heaplimit;
-
-/* Doubly linked lists of free fragments.  */
-struct list
-  {
-    struct list *next;
-    struct list *prev;
-  };
-
-/* Free list headers for each fragment size.  */
-extern struct list _fraghead[];
-
-/* Instrumentation.  */
-extern size_t _chunks_used;
-extern size_t _bytes_used;
-extern size_t _chunks_free;
-extern size_t _bytes_free;
-
-/* Internal version of free() used in morecore(). */
-extern void EXFUN(__free, (PTR __ptr));
-
-#endif  /* _MALLOC_INTERNAL.  */
-
-/* Underlying allocation function; successive calls should
-   return contiguous pieces of memory.  */
-extern PTR EXFUN((*__morecore), (ptrdiff_t __size));
-
-/* Default value of previous.  */
-extern PTR EXFUN(__default_morecore, (ptrdiff_t __size));
-
-/* Flag whether malloc has been called.  */
-extern int __malloc_initialized;
-
-/* Hooks for debugging versions.  */
-extern void EXFUN((*__free_hook), (PTR __ptr));
-extern PTR EXFUN((*__malloc_hook), (size_t __size));
-extern PTR EXFUN((*__realloc_hook), (PTR __ptr, size_t __size));
-
-/* Activate a standard collection of debugging hooks.  */
-extern void EXFUN(mcheck, (void EXFUN((*func), (NOARGS))));
-
-/* Statistics available to the user.  */
-struct mstats
-  {
-    size_t bytes_total;                /* Total size of the heap. */
-    size_t chunks_used;                /* Chunks allocated by the user. */
-    size_t bytes_used;         /* Byte total of user-allocated chunks. */
-    size_t chunks_free;                /* Chunks in the free list. */
-    size_t bytes_free;         /* Byte total of chunks in the free list. */
-  };
-
-/* Pick up the current statistics. */
-extern struct mstats EXFUN(mstats, (NOARGS));
-
-#endif /* malloc.h  */
diff --git a/gdb/go32-nat.c b/gdb/go32-nat.c
deleted file mode 100644 (file)
index 899c29f..0000000
+++ /dev/null
@@ -1,35 +0,0 @@
-/* Native dependent code for dos running GO32 for GDB, the GNU debugger.
-   Copyright 1992 Free Software Foundation, Inc.
-
-This file is part of GDB.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-#include <stdio.h>
-
-static void uerror(char *s)
-{
-  fprintf(stderr, "Fatal: %s!\n");
-  exit(1);
-}
-
-fetch_core_registers(){uerror("attempt to call fetch_core_registers()");}
-
-fetch_inferior_registers(){uerror("attempt to call fetch_inferior_registers()");}
-store_inferior_registers(){uerror("attempt to call store_inferior_registers()");}
-
-child_resume(){uerror("attempt to call child_resume()");}
-child_xfer_memory(){uerror("attempt to call child_xfer_memory()");}
-
index 139597f..e69de29 100755 (executable)
@@ -1,2 +0,0 @@
-
-
diff --git a/gdb/hp300hpux-xdep.c b/gdb/hp300hpux-xdep.c
deleted file mode 100755 (executable)
index f7f1cf0..0000000
+++ /dev/null
@@ -1,230 +0,0 @@
-/* HP/UX interface for HP 300's, for GDB when running under Unix.
-   Copyright (C) 1986, 1987, 1989, 1991 Free Software Foundation, Inc.
-   
-This file is part of GDB.
-
-GDB is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 1, or (at your option)
-any later version.
-
-GDB is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with GDB; see the file COPYING.  If not, write to
-the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-#include <stdio.h>
-#include "defs.h"
-#include "param.h"
-#include "frame.h"
-#include "inferior.h"
-
-/* Defining this means some system include files define some extra stuff.  */
-#define WOPR
-#include <sys/param.h>
-#include <sys/dir.h>
-#include <signal.h>
-#include <sys/user.h>
-#include <sys/ioctl.h>
-#include <fcntl.h>
-
-#include <sys/ptrace.h>
-#include <sys/reg.h>
-#include <sys/trap.h>
-
-#include "gdbcore.h"
-
-#include <sys/file.h>
-#include <sys/stat.h>
-
-#define INFERIOR_AR0(u)                                                        \
-  ((ptrace                                                             \
-    (PT_RUAREA, inferior_pid, ((char *) &u.u_ar0 - (char *) &u), 0))   \
-   - KERNEL_U_ADDR)
-
-static void
-fetch_inferior_register (regno, regaddr)
-     register int regno;
-     register unsigned int regaddr;
-{
-#ifndef HPUX_VERSION_5
-  if (regno == PS_REGNUM)
-    {
-      union { int i; short s[2]; } ps_val;
-      int regval;
-      
-      ps_val.i = (ptrace (PT_RUAREA, inferior_pid, regaddr, 0));
-      regval = ps_val.s[0];
-      supply_register (regno, &regval);
-    }
-  else
-#endif /* not HPUX_VERSION_5 */
-    {
-      char buf[MAX_REGISTER_RAW_SIZE];
-      register int i;
-      
-      for (i = 0; i < REGISTER_RAW_SIZE (regno); i += sizeof (int))
-       {
-         *(int *) &buf[i] = ptrace (PT_RUAREA, inferior_pid, regaddr, 0);
-         regaddr += sizeof (int);
-       }
-      supply_register (regno, buf);
-    }
-  return;
-}
-
-static void
-store_inferior_register_1 (regno, regaddr, value)
-     int regno;
-     unsigned int regaddr;
-     int value;
-{
-  errno = 0;
-  ptrace (PT_WUAREA, inferior_pid, regaddr, value);
-#if 0
-  /* HP-UX randomly sets errno to non-zero for regno == 25.
-     However, the value is correctly written, so ignore errno. */
-  if (errno != 0)
-    {
-      char string_buf[64];
-      
-      sprintf (string_buf, "writing register number %d", regno);
-      perror_with_name (string_buf);
-    }
-#endif
-  return;
-}
-
-static void
-store_inferior_register (regno, regaddr)
-     register int regno;
-     register unsigned int regaddr;
-{
-#ifndef HPUX_VERSION_5
-  if (regno == PS_REGNUM)
-    {
-      union { int i; short s[2]; } ps_val;
-      
-      ps_val.i = (ptrace (PT_RUAREA, inferior_pid, regaddr, 0));
-      ps_val.s[0] = (read_register (regno));
-      store_inferior_register_1 (regno, regaddr, ps_val.i);
-    }
-  else
-#endif /* not HPUX_VERSION_5 */
-    {
-      char buf[MAX_REGISTER_RAW_SIZE];
-      register int i;
-      extern char registers[];
-      
-      for (i = 0; i < REGISTER_RAW_SIZE (regno); i += sizeof (int))
-       {
-         store_inferior_register_1
-           (regno, regaddr,
-            (*(int *) &registers[(REGISTER_BYTE (regno)) + i]));
-         regaddr += sizeof (int);
-       }
-    }
-  return;
-}
-
-void
-fetch_inferior_registers (regno)
-     int regno;
-{
-  struct user u;
-  register int regno;
-  register unsigned int ar0_offset;
-  
-  ar0_offset = (INFERIOR_AR0 (u));
-  if (regno == -1)
-    {
-      for (regno = 0; (regno < FP0_REGNUM); regno++)
-       fetch_inferior_register (regno, (REGISTER_ADDR (ar0_offset, regno)));
-      for (; (regno < NUM_REGS); regno++)
-       fetch_inferior_register (regno, (FP_REGISTER_ADDR (u, regno)));
-    }
-  else
-    fetch_inferior_register (regno,
-                            (regno < FP0_REGNUM
-                             ? REGISTER_ADDR (ar0_offset, regno)
-                             : FP_REGISTER_ADDR (u, regno)));
-}
-
-/* Store our register values back into the inferior.
-   If REGNO is -1, do this for all registers.
-   Otherwise, REGNO specifies which register (so we can save time).  */
-
-store_inferior_registers (regno)
-     register int regno;
-{
-  struct user u;
-  register unsigned int ar0_offset;
-  extern char registers[];
-
-  if (regno >= FP0_REGNUM)
-    {
-      store_inferior_register (regno, (FP_REGISTER_ADDR (u, regno)));
-      return;
-    }
-  
-  ar0_offset = (INFERIOR_AR0 (u));
-  if (regno >= 0)
-    {
-      store_inferior_register (regno, (REGISTER_ADDR (ar0_offset, regno)));
-      return;
-    }
-
-  for (regno = 0; (regno < FP0_REGNUM); regno++)
-    store_inferior_register (regno, (REGISTER_ADDR (ar0_offset, regno)));
-  for (; (regno < NUM_REGS); regno++)
-    store_inferior_register (regno, (FP_REGISTER_ADDR (u, regno)));
-  return;
-}
-
-\f
-/* Take the register values out of a core file and store
-   them where `read_register' will find them.  */
-
-#ifdef HPUX_VERSION_5
-#define e_PS e_regs[PS]
-#define e_PC e_regs[PC]
-#endif /* HPUX_VERSION_5 */
-
-void
-fetch_core_registers (core_reg_sect, core_reg_size, which)
-     char *core_reg_sect;
-     int core_reg_size;
-     int which;
-{
-  int val, regno;
-  struct user u;
-  struct exception_stack *pes = (struct exception_stack *) core_reg_sect;
-#define es (*pes)
-  char *buf;
-
-  if (which == 0) {
-    if (core_reg_size < 
-                 ((char *) &es.e_offset - (char *) &es.e_regs[R0]))
-         error ("Not enough registers in core file");
-    for (regno = 0; (regno < PS_REGNUM); regno++)
-      supply_register (regno, &es.e_regs[regno + R0]);
-    val = es.e_PS;
-    supply_register (regno++, &val);
-    supply_register (regno++, &es.e_PC);
-
-  } else if (which == 2) {
-
-    /* FIXME: This may not work if the float regs and control regs are
-       discontinuous.  */
-    for (regno = FP0_REGNUM, buf = core_reg_sect;
-        (regno < NUM_REGS);
-        buf += REGISTER_RAW_SIZE (regno), regno++)
-      {
-       supply_register (regno, buf);
-      }
-  }
-}
diff --git a/gdb/hp300ux-xdep.c b/gdb/hp300ux-xdep.c
deleted file mode 100644 (file)
index f043acc..0000000
+++ /dev/null
@@ -1,233 +0,0 @@
-/* HP/UX interface for HP 300's, for GDB when running under Unix.
-   Copyright (C) 1986, 1987, 1989, 1991 Free Software Foundation, Inc.
-   
-This file is part of GDB.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-#include "defs.h"
-#include "frame.h"
-#include "inferior.h"
-
-/* Defining this means some system include files define some extra stuff.  */
-#define WOPR
-#include <sys/param.h>
-#include <sys/dir.h>
-#include <signal.h>
-#include <sys/user.h>
-#include <sys/ioctl.h>
-#include <fcntl.h>
-
-#include <sys/ptrace.h>
-#include <sys/reg.h>
-#include <sys/trap.h>
-
-#include "gdbcore.h"
-
-#include <sys/file.h>
-#include <sys/stat.h>
-
-#define INFERIOR_AR0(u)                                                        \
-  ((ptrace                                                             \
-    (PT_RUAREA, inferior_pid,                                          \
-     (PTRACE_ARG3_TYPE) ((char *) &u.u_ar0 - (char *) &u), 0))         \
-   - KERNEL_U_ADDR)
-
-static void
-fetch_inferior_register (regno, regaddr)
-     register int regno;
-     register unsigned int regaddr;
-{
-#ifndef HPUX_VERSION_5
-  if (regno == PS_REGNUM)
-    {
-      union { int i; short s[2]; } ps_val;
-      int regval;
-      
-      ps_val.i = (ptrace (PT_RUAREA, inferior_pid, (PTRACE_ARG3_TYPE) regaddr,
-                         0));
-      regval = ps_val.s[0];
-      supply_register (regno, &regval);
-    }
-  else
-#endif /* not HPUX_VERSION_5 */
-    {
-      char buf[MAX_REGISTER_RAW_SIZE];
-      register int i;
-      
-      for (i = 0; i < REGISTER_RAW_SIZE (regno); i += sizeof (int))
-       {
-         *(int *) &buf[i] = ptrace (PT_RUAREA, inferior_pid,
-                                    (PTRACE_ARG3_TYPE) regaddr, 0);
-         regaddr += sizeof (int);
-       }
-      supply_register (regno, buf);
-    }
-  return;
-}
-
-static void
-store_inferior_register_1 (regno, regaddr, value)
-     int regno;
-     unsigned int regaddr;
-     int value;
-{
-  errno = 0;
-  ptrace (PT_WUAREA, inferior_pid, (PTRACE_ARG3_TYPE) regaddr, value);
-#if 0
-  /* HP-UX randomly sets errno to non-zero for regno == 25.
-     However, the value is correctly written, so ignore errno. */
-  if (errno != 0)
-    {
-      char string_buf[64];
-      
-      sprintf (string_buf, "writing register number %d", regno);
-      perror_with_name (string_buf);
-    }
-#endif
-  return;
-}
-
-static void
-store_inferior_register (regno, regaddr)
-     register int regno;
-     register unsigned int regaddr;
-{
-#ifndef HPUX_VERSION_5
-  if (regno == PS_REGNUM)
-    {
-      union { int i; short s[2]; } ps_val;
-      
-      ps_val.i = (ptrace (PT_RUAREA, inferior_pid, (PTRACE_ARG3_TYPE) regaddr,
-                         0));
-      ps_val.s[0] = (read_register (regno));
-      store_inferior_register_1 (regno, regaddr, ps_val.i);
-    }
-  else
-#endif /* not HPUX_VERSION_5 */
-    {
-      char buf[MAX_REGISTER_RAW_SIZE];
-      register int i;
-      extern char registers[];
-      
-      for (i = 0; i < REGISTER_RAW_SIZE (regno); i += sizeof (int))
-       {
-         store_inferior_register_1
-           (regno, regaddr,
-            (*(int *) &registers[(REGISTER_BYTE (regno)) + i]));
-         regaddr += sizeof (int);
-       }
-    }
-  return;
-}
-
-void
-fetch_inferior_registers (regno)
-     int regno;
-{
-  struct user u;
-  register unsigned int ar0_offset;
-  
-  ar0_offset = (INFERIOR_AR0 (u));
-  if (regno == -1)
-    {
-      for (regno = 0; (regno < FP0_REGNUM); regno++)
-       fetch_inferior_register (regno, (REGISTER_ADDR (ar0_offset, regno)));
-      for (; (regno < NUM_REGS); regno++)
-       fetch_inferior_register (regno, (FP_REGISTER_ADDR (u, regno)));
-    }
-  else
-    fetch_inferior_register (regno,
-                            (regno < FP0_REGNUM
-                             ? REGISTER_ADDR (ar0_offset, regno)
-                             : FP_REGISTER_ADDR (u, regno)));
-}
-
-/* Store our register values back into the inferior.
-   If REGNO is -1, do this for all registers.
-   Otherwise, REGNO specifies which register (so we can save time).  */
-
-void
-store_inferior_registers (regno)
-     register int regno;
-{
-  struct user u;
-  register unsigned int ar0_offset;
-  extern char registers[];
-
-  if (regno >= FP0_REGNUM)
-    {
-      store_inferior_register (regno, (FP_REGISTER_ADDR (u, regno)));
-      return;
-    }
-  
-  ar0_offset = (INFERIOR_AR0 (u));
-  if (regno >= 0)
-    {
-      store_inferior_register (regno, (REGISTER_ADDR (ar0_offset, regno)));
-      return;
-    }
-
-  for (regno = 0; (regno < FP0_REGNUM); regno++)
-    store_inferior_register (regno, (REGISTER_ADDR (ar0_offset, regno)));
-  for (; (regno < NUM_REGS); regno++)
-    store_inferior_register (regno, (FP_REGISTER_ADDR (u, regno)));
-  return;
-}
-
-\f
-/* Take the register values out of a core file and store
-   them where `read_register' will find them.  */
-
-#ifdef HPUX_VERSION_5
-#define e_PS e_regs[PS]
-#define e_PC e_regs[PC]
-#endif /* HPUX_VERSION_5 */
-
-void
-fetch_core_registers (core_reg_sect, core_reg_size, which, reg_addr)
-     char *core_reg_sect;
-     int core_reg_size;
-     int which;
-     unsigned int reg_addr;    /* Unused in this version */
-{
-  int val, regno;
-  struct user u;
-  struct exception_stack *pes = (struct exception_stack *) core_reg_sect;
-#define es (*pes)
-  char *buf;
-
-  if (which == 0) {
-    if (core_reg_size < 
-                 ((char *) &es.e_offset - (char *) &es.e_regs[R0]))
-         error ("Not enough registers in core file");
-    for (regno = 0; (regno < PS_REGNUM); regno++)
-      supply_register (regno, &es.e_regs[regno + R0]);
-    val = es.e_PS;
-    supply_register (regno++, &val);
-    supply_register (regno++, &es.e_PC);
-
-  } else if (which == 2) {
-
-    /* FIXME: This may not work if the float regs and control regs are
-       discontinuous.  */
-    for (regno = FP0_REGNUM, buf = core_reg_sect;
-        (regno < NUM_REGS);
-        buf += REGISTER_RAW_SIZE (regno), regno++)
-      {
-       supply_register (regno, buf);
-      }
-  }
-}
index 56bb2d5..e69de29 100644 (file)
@@ -1,121 +0,0 @@
-/* Extract registers from an HP-PA core file, for GDB.
-   Copyright (C) 1988, 1991, 1992  Free Software Foundation, Inc.
-
-This file is part of GDB.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-/* core.c is supposed to be the more machine-independent aspects of this;
-   this file is more machine-specific.  */
-
-#include "defs.h"
-#include "gdbcore.h"
-
-/* These are needed on various systems to expand REGISTER_U_ADDR.  */
-/* FIXME:  Remove any not needed on HP-PA.  */
-#include <sys/types.h>
-#include <sys/param.h>
-#include <sys/dir.h>
-#include <sys/file.h>
-#include <sys/stat.h>
-#include <sys/user.h>
-#ifndef USG
-#include <sys/ptrace.h>
-#endif
-
-
-/* Extract the register values out of the core file and store
-   them where `read_register' will find them.
-
-   CORE_REG_SECT points to the register values themselves, read into memory.
-   CORE_REG_SIZE is the size of that area.
-   WHICH says which set of registers we are handling (0 = int, 2 = float
-         on machines where they are discontiguous).
-   REG_ADDR is the offset from u.u_ar0 to the register values relative to
-            core_reg_sect.  This is used with old-fashioned core files to
-           locate the registers in a large upage-plus-stack ".reg" section.
-           Original upage address X is at location core_reg_sect+x+reg_addr.
- */
-
-void
-fetch_core_registers (core_reg_sect, core_reg_size, which, reg_addr)
-     char *core_reg_sect;
-     unsigned core_reg_size;
-     int which;
-     unsigned reg_addr;
-{
-  register int regno;
-  register unsigned int addr;
-  int bad_reg = -1;
-  register reg_ptr = -reg_addr;                /* Original u.u_ar0 is -reg_addr. */
-
-  /* If u.u_ar0 was an absolute address in the core file, relativize it now,
-     so we can use it as an offset into core_reg_sect.  When we're done,
-     "register 0" will be at core_reg_sect+reg_ptr, and we can use
-     register_addr to offset to the other registers.  If this is a modern
-     core file without a upage, reg_ptr will be zero and this is all a big
-     NOP.  */
-  if (reg_ptr > core_reg_size)
-    reg_ptr -= KERNEL_U_ADDR;
-  if (reg_ptr > core_reg_size)
-    fprintf (stderr, "Can't find registers in core file\n");
-
-  for (regno = 0; regno < NUM_REGS; regno++)
-    {
-      addr = register_addr (regno, reg_ptr);
-      if (addr >= core_reg_size) {
-       if (bad_reg < 0)
-         bad_reg = regno;
-      } else {
-       if (regno == PCOQ_HEAD_REGNUM || regno == PCOQ_TAIL_REGNUM)
-         core_reg_sect[addr +3] &= ~0x3;
-       supply_register (regno, core_reg_sect + addr);
-      }
-    }
-  if (bad_reg > 0)
-    {
-      error ("Register %s not found in core file.", reg_names[bad_reg]);
-    }
-}
-
-
-#ifdef REGISTER_U_ADDR
-
-/* Return the address in the core dump or inferior of register REGNO.
-   BLOCKEND is the address of the end of the user structure.  */
-
-unsigned int
-register_addr (regno, blockend)
-     int regno;
-     int blockend;
-{
-  int addr;
-
-  if (regno < 0 || regno >= NUM_REGS)
-    error ("Invalid register number %d.", regno);
-
-  REGISTER_U_ADDR (addr, blockend, regno);
-
-  return addr;
-}
-
-#endif /* REGISTER_U_ADDR */
-
-
-
-
-
-
-
index 01d7404..e69de29 100644 (file)
@@ -1,406 +0,0 @@
-/* Host-dependent code for HP PA-RISC running BSD Unix, for GDB.
-   Copyright 1986, 1987, 1989, 1990, 1991, 1992 Free Software Foundation, Inc.
-   Contributed by the Center for Software Science at the
-   University of Utah (pa-gdb-bugs@cs.utah.edu).
-
-This file is part of GDB.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-#include "defs.h"
-#include "frame.h"
-#include "inferior.h"
-#include "target.h"
-
-#ifdef USG
-#include <sys/types.h>
-#endif
-
-#include <sys/param.h>
-#include <sys/dir.h>
-#include <signal.h>
-#include <sys/ioctl.h>
-#ifndef USG
-#include <sys/ptrace.h>
-#endif
-
-
-#ifndef PT_ATTACH
-#define PT_ATTACH PTRACE_ATTACH
-#endif
-#ifndef PT_DETACH
-#define PT_DETACH PTRACE_DETACH
-#endif
-
-#include "gdbcore.h"
-#include <sys/user.h>          /* After a.out.h  */
-#include <sys/file.h>
-#include <sys/stat.h>
-\f
-/* This function simply calls ptrace with the given arguments.  
-   It exists so that all calls to ptrace are isolated in this 
-   machine-dependent file. */
-int
-call_ptrace (request, pid, addr, data)
-     int request, pid;
-     PTRACE_ARG3_TYPE addr;
-     int data;
-{
-  return ptrace (request, pid, addr, data);
-}
-
-#ifdef DEBUG_PTRACE
-/* For the rest of the file, use an extra level of indirection */
-/* This lets us breakpoint usefully on call_ptrace. */
-#define ptrace call_ptrace
-#endif
-
-void
-kill_inferior ()
-{
-  if (inferior_pid == 0)
-    return;
-  ptrace (PT_KILL, inferior_pid, (PTRACE_ARG3_TYPE) 0, 0);
-  wait ((int *)0);
-  target_mourn_inferior ();
-}
-
-/* Resume execution of the inferior process.
-   If STEP is nonzero, single-step it.
-   If SIGNAL is nonzero, give it that signal.  */
-
-void
-child_resume (step, signal)
-     int step;
-     int signal;
-{
-  errno = 0;
-
-  /* An address of (PTRACE_ARG3_TYPE) 1 tells ptrace to continue from where
-     it was. (If GDB wanted it to start some other way, we have already
-     written a new PC value to the child.)  */
-
-  if (step)
-    ptrace (PT_STEP, inferior_pid, (PTRACE_ARG3_TYPE) 1, signal);
-  else
-    ptrace (PT_CONTINUE, inferior_pid, (PTRACE_ARG3_TYPE) 1, signal);
-
-  if (errno)
-    perror_with_name ("ptrace");
-}
-\f
-#ifdef ATTACH_DETACH
-/* Nonzero if we are debugging an attached process rather than
-   an inferior.  */
-extern int attach_flag;
-
-/* Start debugging the process whose number is PID.  */
-int
-attach (pid)
-     int pid;
-{
-  errno = 0;
-  ptrace (PT_ATTACH, pid, (PTRACE_ARG3_TYPE) 0, 0);
-  if (errno)
-    perror_with_name ("ptrace");
-  attach_flag = 1;
-  return pid;
-}
-
-/* Stop debugging the process whose number is PID
-   and continue it with signal number SIGNAL.
-   SIGNAL = 0 means just continue it.  */
-
-void
-detach (signal)
-     int signal;
-{
-  errno = 0;
-  ptrace (PT_DETACH, inferior_pid, (PTRACE_ARG3_TYPE) 1, signal);
-  if (errno)
-    perror_with_name ("ptrace");
-  attach_flag = 0;
-}
-#endif /* ATTACH_DETACH */
-\f
-#if !defined (FETCH_INFERIOR_REGISTERS)
-
-/* KERNEL_U_ADDR is the amount to subtract from u.u_ar0
-   to get the offset in the core file of the register values.  */
-#if defined (KERNEL_U_ADDR_BSD)
-/* Get kernel_u_addr using BSD-style nlist().  */
-CORE_ADDR kernel_u_addr;
-
-#include <a.out.gnu.h>         /* For struct nlist */
-
-void
-_initialize_kernel_u_addr ()
-{
-  struct nlist names[2];
-
-  names[0].n_un.n_name = "_u";
-  names[1].n_un.n_name = NULL;
-  if (nlist ("/vmunix", names) == 0)
-    kernel_u_addr = names[0].n_value;
-  else
-    fatal ("Unable to get kernel u area address.");
-}
-#endif /* KERNEL_U_ADDR_BSD.  */
-
-#if defined (KERNEL_U_ADDR_HPUX)
-/* Get kernel_u_addr using HPUX-style nlist().  */
-CORE_ADDR kernel_u_addr;
-
-struct hpnlist {      
-        char *          n_name;
-        long            n_value;  
-        unsigned char   n_type;   
-        unsigned char   n_length;  
-        short           n_almod;   
-        short           n_unused;
-};
-static struct hpnlist nl[] = {{ "_u", -1, }, { (char *) 0, }};
-
-/* read the value of the u area from the hp-ux kernel */
-void _initialize_kernel_u_addr ()
-{
-    struct user u;
-    nlist ("/hp-ux", &nl);
-    kernel_u_addr = nl[0].n_value;
-}
-#endif /* KERNEL_U_ADDR_HPUX.  */
-
-#if !defined (offsetof)
-#define offsetof(TYPE, MEMBER) ((unsigned long) &((TYPE *)0)->MEMBER)
-#endif
-
-/* U_REGS_OFFSET is the offset of the registers within the u area.  */
-#if !defined (U_REGS_OFFSET)
-#define U_REGS_OFFSET \
-  ptrace (PT_READ_U, inferior_pid, \
-          (PTRACE_ARG3_TYPE) (offsetof (struct user, u_ar0)), 0) \
-    - KERNEL_U_ADDR
-#endif
-
-/* Registers we shouldn't try to fetch.  */
-#if !defined (CANNOT_FETCH_REGISTER)
-#define CANNOT_FETCH_REGISTER(regno) 0
-#endif
-
-/* Fetch one register.  */
-
-static void
-fetch_register (regno)
-     int regno;
-{
-  register unsigned int regaddr;
-  char buf[MAX_REGISTER_RAW_SIZE];
-  char mess[128];                              /* For messages */
-  register int i;
-
-  /* Offset of registers within the u area.  */
-  unsigned int offset;
-
-  if (CANNOT_FETCH_REGISTER (regno))
-    {
-      bzero (buf, REGISTER_RAW_SIZE (regno));  /* Supply zeroes */
-      supply_register (regno, buf);
-      return;
-    }
-
-  offset = U_REGS_OFFSET;
-
-  regaddr = register_addr (regno, offset);
-  for (i = 0; i < REGISTER_RAW_SIZE (regno); i += sizeof (int))
-    {
-      errno = 0;
-      *(int *) &buf[i] = ptrace (PT_RUREGS, inferior_pid,
-                                (PTRACE_ARG3_TYPE) regaddr, 0);
-      regaddr += sizeof (int);
-      if (errno != 0)
-       {
-         sprintf (mess, "reading register %s (#%d)", reg_names[regno], regno);
-         perror_with_name (mess);
-       }
-    }
-  supply_register (regno, buf);
-}
-
-
-/* Fetch all registers, or just one, from the child process.  */
-
-void
-fetch_inferior_registers (regno)
-     int regno;
-{
-  if (regno == -1)
-    for (regno = 0; regno < NUM_REGS; regno++)
-      fetch_register (regno);
-  else
-    fetch_register (regno);
-}
-
-/* Registers we shouldn't try to store.  */
-#if !defined (CANNOT_STORE_REGISTER)
-#define CANNOT_STORE_REGISTER(regno) 0
-#endif
-
-/* Store our register values back into the inferior.
-   If REGNO is -1, do this for all registers.
-   Otherwise, REGNO specifies which register (so we can save time).  */
-
-void
-store_inferior_registers (regno)
-     int regno;
-{
-  register unsigned int regaddr;
-  char buf[80];
-  extern char registers[];
-  register int i;
-
-  unsigned int offset = U_REGS_OFFSET;
-
-  if (regno >= 0)
-    {
-      regaddr = register_addr (regno, offset);
-      for (i = 0; i < REGISTER_RAW_SIZE (regno); i += sizeof(int))
-       {
-         errno = 0;
-         ptrace (PT_WRITE_U, inferior_pid, (PTRACE_ARG3_TYPE) regaddr,
-                 *(int *) &registers[REGISTER_BYTE (regno) + i]);
-         if (errno != 0)
-           {
-             sprintf (buf, "writing register number %d(%d)", regno, i);
-             perror_with_name (buf);
-           }
-         regaddr += sizeof(int);
-       }
-    }
-  else
-    {
-      for (regno = 0; regno < NUM_REGS; regno++)
-       {
-         if (CANNOT_STORE_REGISTER (regno))
-           continue;
-         regaddr = register_addr (regno, offset);
-         for (i = 0; i < REGISTER_RAW_SIZE (regno); i += sizeof(int))
-           {
-             errno = 0;
-             ptrace (PT_WRITE_U, inferior_pid, (PTRACE_ARG3_TYPE) regaddr,
-                     *(int *) &registers[REGISTER_BYTE (regno) + i]);
-             if (errno != 0)
-               {
-                 sprintf (buf, "writing register number %d(%d)", regno, i);
-                 perror_with_name (buf);
-               }
-             regaddr += sizeof(int);
-           }
-       }
-    }
-  return;
-}
-#endif /* !defined (FETCH_INFERIOR_REGISTERS).  */
-\f
-/* NOTE! I tried using PTRACE_READDATA, etc., to read and write memory
-   in the NEW_SUN_PTRACE case.
-   It ought to be straightforward.  But it appears that writing did
-   not write the data that I specified.  I cannot understand where
-   it got the data that it actually did write.  */
-
-/* Copy LEN bytes to or from inferior's memory starting at MEMADDR
-   to debugger memory starting at MYADDR.   Copy to inferior if
-   WRITE is nonzero.
-  
-   Returns the length copied, which is either the LEN argument or zero.
-   This xfer function does not do partial moves, since child_ops
-   doesn't allow memory operations to cross below us in the target stack
-   anyway.  */
-
-int
-child_xfer_memory (memaddr, myaddr, len, write, target)
-     CORE_ADDR memaddr;
-     char *myaddr;
-     int len;
-     int write;
-     struct target_ops *target;                /* ignored */
-{
-  register int i;
-  /* Round starting address down to longword boundary.  */
-  register CORE_ADDR addr = memaddr & - sizeof (int);
-  /* Round ending address up; get number of longwords that makes.  */
-  register int count
-    = (((memaddr + len) - addr) + sizeof (int) - 1) / sizeof (int);
-  /* Allocate buffer of that many longwords.  */
-  register int *buffer = (int *) alloca (count * sizeof (int));
-
-  if (write)
-    {
-      /* Fill start and end extra bytes of buffer with existing memory data.  */
-
-      if (addr != memaddr || len < (int)sizeof (int)) {
-       /* Need part of initial word -- fetch it.  */
-        buffer[0] = ptrace (PT_READ_I, inferior_pid, (PTRACE_ARG3_TYPE) addr,
-                           0);
-      }
-
-      if (count > 1)           /* FIXME, avoid if even boundary */
-       {
-         buffer[count - 1]
-           = ptrace (PT_READ_I, inferior_pid,
-                     (PTRACE_ARG3_TYPE) (addr + (count - 1) * sizeof (int)),
-                     0);
-       }
-
-      /* Copy data to be written over corresponding part of buffer */
-
-      bcopy (myaddr, (char *) buffer + (memaddr & (sizeof (int) - 1)), len);
-
-      /* Write the entire buffer.  */
-
-      for (i = 0; i < count; i++, addr += sizeof (int))
-       {
-         errno = 0;
-         ptrace (PT_WRITE_D, inferior_pid, (PTRACE_ARG3_TYPE) addr,
-                 buffer[i]);
-         if (errno)
-           {
-             /* Using the appropriate one (I or D) is necessary for
-                Gould NP1, at least.  */
-             errno = 0;
-             ptrace (PT_WRITE_I, inferior_pid, (PTRACE_ARG3_TYPE) addr,
-                     buffer[i]);
-           }
-         if (errno)
-           return 0;
-       }
-    }
-  else
-    {
-      /* Read all the longwords */
-      for (i = 0; i < count; i++, addr += sizeof (int))
-       {
-         errno = 0;
-         buffer[i] = ptrace (PT_READ_I, inferior_pid,
-                             (PTRACE_ARG3_TYPE) addr, 0);
-         if (errno)
-           return 0;
-         QUIT;
-       }
-
-      /* Copy appropriate bytes out of the buffer.  */
-      bcopy ((char *) buffer + (memaddr & (sizeof (int) - 1)), myaddr, len);
-    }
-  return len;
-}
index 5ca5f9b..e69de29 100644 (file)
@@ -1,251 +0,0 @@
-/* Machine-dependent code which would otherwise be in core.c
-   for GDB, the GNU debugger.  This code is for the HP PA-RISC cpu.
-   Copyright 1986, 1987, 1989, 1990, 1991, 1992 Free Software Foundation, Inc.
-
-   Contributed by the Center for Software Science at the
-   University of Utah (pa-gdb-bugs@cs.utah.edu).
-
-This file is part of GDB.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-#include "defs.h"
-#include "frame.h"
-#include "inferior.h"
-
-#ifdef USG
-#include <sys/types.h>
-#endif
-
-#include <sys/param.h>
-#include <sys/dir.h>
-#include <signal.h>
-#include <sys/ioctl.h>
-/* #include <fcntl.h>  Can we live without this?  */
-
-#ifndef hpux
-#include <a.out.h>
-#include <machine/pcb.h>
-#include <sys/time.h>
-#include "/usr/src/sys/hpux/hpux.h"
-#define USRSTACK 0x68FF3000
-#else
-#include <sys/user.h>          /* After a.out.h  */
-#endif
-
-#include <sys/file.h>
-#include <sys/stat.h>
-#include <sys/ptrace.h>
-
-#ifndef hpux
-#undef USIZE
-#undef UPAGES
-
-#define USIZE 3
-#define UPAGES 7
-#endif
-
-extern int errno;
-
-/* File names of core file and executable file.  */
-
-extern char *corefile;
-extern char *execfile;
-
-/* Descriptors on which core file and executable file are open.
-   Note that the execchan is closed when an inferior is created
-   and reopened if the inferior dies or is killed.  */
-
-extern int corechan;
-extern int execchan;
-
-/* Last modification time of executable file.
-   Also used in source.c to compare against mtime of a source file.  */
-
-extern int exec_mtime;
-
-/* Virtual addresses of bounds of the two areas of memory in the core file.  */
-
-extern CORE_ADDR data_start;
-extern CORE_ADDR data_end;
-extern CORE_ADDR stack_start;
-extern CORE_ADDR stack_end;
-
-/* Virtual addresses of bounds of two areas of memory in the exec file.
-   Note that the data area in the exec file is used only when there is no core file.  */
-
-extern CORE_ADDR text_start;
-extern CORE_ADDR text_end;
-
-extern CORE_ADDR exec_data_start;
-extern CORE_ADDR exec_data_end;
-
-/* Address in executable file of start of text area data.  */
-
-extern int text_offset;
-
-/* Address in executable file of start of data area data.  */
-
-extern int exec_data_offset;
-
-/* Address in core file of start of data area data.  */
-
-extern int data_offset;
-
-/* Address in core file of start of stack area data.  */
-
-extern int stack_offset;
-
-extern struct header file_hdr;
-extern struct som_exec_auxhdr exec_hdr;
-
-extern int (*core_file_hook)();
-
-#ifdef KERNELDEBUG
-
-extern int kernel_debugging;
-extern int kernel_core_file_hook();
-
-#endif
-
-core_file_command (filename, from_tty)
-     char *filename;
-     int from_tty;
-{
-  int val;
-  extern char registers[];
-#ifdef KERNELDEBUG
-  struct stat stb;
-#endif
-
-  /* Discard all vestiges of any previous core file
-     and mark data and stack spaces as empty.  */
-
-  if (corefile)
-    free (corefile);
-  corefile = 0;
-  core_file_hook = 0;
-
-  if (corechan >= 0)
-    close (corechan);
-  corechan = -1;
-
-  data_start = 0;
-  data_end = 0;
-  stack_start = STACK_END_ADDR;
-  stack_end = STACK_END_ADDR;
-
-  /* Now, if a new core file was specified, open it and digest it.  */
-
-  if (filename)
-    {
-      filename = tilde_expand (filename);
-      make_cleanup (free, filename);
-      
-      if (have_inferior_p ())
-       error ("To look at a core file, you must kill the inferior with \"kill\".");
-      corechan = open (filename, O_RDONLY, 0);
-      if (corechan < 0)
-       perror_with_name (filename);
-
-#ifdef KERNELDEBUG
-      fstat(corechan, &stb);
-
-      if (kernel_debugging) {
-             setup_kernel_debugging();
-             core_file_hook = kernel_core_file_hook;
-             set_kernel_boundaries();
-      } else if ((stb.st_mode & S_IFMT) == S_IFCHR &&
-                stb.st_rdev == makedev(2, 1)) {
-             /* looking at /dev/kmem */
-             data_offset = data_start = KERNBASE;
-             data_end = ~0; /* XXX */
-             stack_end = stack_start = data_end;
-             set_kernel_boundaries();
-      } else
-#endif
-      {
-       /* HP PA-RISC style corefile. */
-#ifndef hpux
-       struct hpuxuser u;
-#else
-       struct user u;
-#endif
-
-       unsigned int reg_offset;
-
-       val = myread (corechan, &u, sizeof u);
-       if (val < 0)
-         perror_with_name ("Not a core file: reading upage");
-       if (val != sizeof u)
-         error ("Not a core file: could only read %d bytes", val);
-
-       /* We are depending on exec_file_command having been called
-          previously to set exec_data_start.  Since the executable
-          and the core file share the same text segment, the address
-          of the data segment will be the same in both.  */
-       data_start = exec_data_start;
-
-       data_end = data_start + NBPG * u.u_dsize;
-       stack_start = USRSTACK; /* from sys/param.h */
-       stack_end = stack_start + NBPG * u.u_ssize;
-       data_offset = NBPG * UPAGES;
-       stack_offset = NBPG * (UPAGES + u.u_dsize);
-
-       /* Some machines put an absolute address in here and some put
-          the offset in the upage of the regs.  */
-       reg_offset = NBPG * USIZE;
-       /* Read the register values out of the core file and store
-          them where `read_register' will find them.  */
-
-       {
-         register int regno;
-
-         for (regno = 0; regno < NUM_REGS; regno++)
-           {
-             unsigned char buf[MAX_REGISTER_RAW_SIZE];
-
-             val = lseek (corechan, register_addr (regno, reg_offset), 0);
-             if (val < 0
-                 || (val = myread (corechan, buf, sizeof buf)) < 0)
-               {
-                 char * buffer = (char *) alloca (strlen (reg_names[regno])
-                                                  + 30);
-                 strcpy (buffer, "Reading register ");
-                 strcat (buffer, reg_names[regno]);
-                                                  
-                 perror_with_name (buffer);
-               }
-             if (regno == PCOQ_HEAD_REGNUM || regno == PCOQ_TAIL_REGNUM)
-               buf[3] &= ~0x3;
-             supply_register (regno, buf);
-           }
-       }
-      }
-      if (filename[0] == '/')
-       corefile = savestring (filename, strlen (filename));
-      else
-       {
-         corefile = concat (current_directory, "/", filename);
-       }
-
-      set_current_frame ( create_new_frame (read_register (FP_REGNUM),
-                                           read_pc ()));
-      select_frame (get_current_frame (), 0);
-      validate_files ();
-    }
-  else if (from_tty)
-    printf ("No core file now.\n");
-}
diff --git a/gdb/hppabsd-tdep.c b/gdb/hppabsd-tdep.c
deleted file mode 100644 (file)
index 8fe6d28..0000000
+++ /dev/null
@@ -1,1422 +0,0 @@
-/* Machine-dependent code which would otherwise be in inflow.c and core.c,
-   for GDB, the GNU debugger.  This code is for the HP PA-RISC cpu.
-   Copyright 1986, 1987, 1989, 1990, 1991, 1992 Free Software Foundation, Inc.
-
-   Contributed by the Center for Software Science at the
-   University of Utah (pa-gdb-bugs@cs.utah.edu).
-
-This file is part of GDB.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-#include "defs.h"
-#include "frame.h"
-#include "inferior.h"
-#include "value.h"
-
-/* For argument passing to the inferior */
-#include "symtab.h"
-
-#ifdef USG
-#include <sys/types.h>
-#endif
-
-#include <sys/param.h>
-#include <sys/dir.h>
-#include <signal.h>
-#include <sys/ioctl.h>
-
-#ifdef COFF_ENCAPSULATE
-#include "a.out.encap.h"
-#else
-#include <a.out.h>
-#endif
-#ifndef N_SET_MAGIC
-#define N_SET_MAGIC(exec, val) ((exec).a_magic = (val))
-#endif
-
-/*#include <sys/user.h>                After a.out.h  */
-#include <sys/file.h>
-#include <sys/stat.h>
-#include <sys/ptrace.h>
-#include <machine/psl.h>
-
-#ifdef KERNELDEBUG
-#include <sys/vmmac.h>
-#include <machine/machparam.h>
-#include <machine/vmparam.h>
-#include <machine/pde.h>
-#include <machine/cpu.h>
-#include <machine/iomod.h>
-#include <machine/pcb.h>
-#include <machine/rpb.h>
-#include <ctype.h>
-
-extern int kernel_debugging;
-extern CORE_ADDR startup_file_start;
-extern CORE_ADDR startup_file_end;
-
-#define        KERNOFF         ((unsigned)KERNBASE)
-#define        INKERNEL(x)     ((x) >= KERNOFF && (x) < KERNOFF + ctob(slr))
-
-static int ok_to_cache();
-static void set_kernel_boundaries();
-
-int devmem = 0;
-int vtophys_ready = 0;
-int kerneltype;
-#define        OS_BSD  1
-#define        OS_MACH 2
-#endif
-
-#include "gdbcore.h"
-#include "gdbcmd.h"
-
-extern int errno;
-\f
-
-
-
-
-
-/* Last modification time of executable file.
-   Also used in source.c to compare against mtime of a source file.  */
-
-extern int exec_mtime;
-
-/* Virtual addresses of bounds of the two areas of memory in the core file.  */
-
-/* extern CORE_ADDR data_start; */
-extern CORE_ADDR data_end;
-extern CORE_ADDR stack_start;
-extern CORE_ADDR stack_end;
-
-/* Virtual addresses of bounds of two areas of memory in the exec file.
-   Note that the data area in the exec file is used only when there is no core file.  */
-
-extern CORE_ADDR text_start;
-extern CORE_ADDR text_end;
-
-extern CORE_ADDR exec_data_start;
-extern CORE_ADDR exec_data_end;
-
-/* Address in executable file of start of text area data.  */
-
-extern int text_offset;
-
-/* Address in executable file of start of data area data.  */
-
-extern int exec_data_offset;
-
-/* Address in core file of start of data area data.  */
-
-extern int data_offset;
-
-/* Address in core file of start of stack area data.  */
-
-extern int stack_offset;
-
-struct header file_hdr;
-struct som_exec_auxhdr exec_hdr;
-\f
-#ifdef KERNELDEBUG
-/*
- * Kernel debugging routines.
- */
-
-static struct pcb pcb;
-static struct pde *pdir;
-static struct hte *htbl;
-static u_int npdir, nhtbl;
-
-static CORE_ADDR
-ksym_lookup(name)
-       char *name;
-{
-       struct symbol *sym;
-       int i;
-
-       if ((i = lookup_misc_func(name)) < 0)
-               error("kernel symbol `%s' not found.", name);
-
-       return (misc_function_vector[i].address);
-}
-
-/*
- * (re-)set the variables that tell "inside_entry_file" where to end
- * a stack backtrace.
- */
-void
-set_kernel_boundaries()
-{
-       switch (kerneltype) {
-       case OS_MACH:
-               startup_file_start = ksym_lookup("$syscall");
-               startup_file_end = ksym_lookup("trap");
-               break;
-       case OS_BSD:
-               startup_file_start = ksym_lookup("syscallinit");
-               startup_file_end = ksym_lookup("$syscallexit");
-               break;
-       }
-}
-
-/*
- * return true if 'len' bytes starting at 'addr' can be read out as
- * longwords and/or locally cached (this is mostly for memory mapped
- * i/o register access when debugging remote kernels).
- */
-static int
-ok_to_cache(addr, len)
-{
-       static CORE_ADDR ioptr;
-
-       if (! ioptr)
-               ioptr = ksym_lookup("ioptr");
-
-       if (addr >= ioptr && addr < SPA_HIGH)
-               return (0);
-
-       return (1);
-}
-
-static
-physrd(addr, dat, len)
-       u_int addr;
-       char *dat;
-{
-       if (lseek(corechan, addr, L_SET) == -1)
-               return (-1);
-       if (read(corechan, dat, len) != len)
-               return (-1);
-
-       return (0);
-}
-
-/*
- * When looking at kernel data space through /dev/mem or with a core file, do
- * virtual memory mapping.
- */
-static CORE_ADDR
-vtophys(space, addr)
-       unsigned space;
-       CORE_ADDR addr;
-{
-       struct pde *pptr;
-       u_int hindx, vpageno, ppageno;
-       CORE_ADDR phys = ~0;
-
-       if (!vtophys_ready) {
-               phys = addr;            /* XXX for kvread */
-       } else if (kerneltype == OS_BSD) {
-               /* make offset into a virtual page no */
-               vpageno = btop(addr);
-               /*
-                *  Determine index into hash table, initialize pptr to this
-                *  entry (since first word of pte & hte are same), and set
-                *  physical page number for first entry in chain.
-                */
-               hindx = pdirhash(space, addr) & (nhtbl-1);
-               pptr = (struct pde *) &htbl[hindx];
-               ppageno = pptr->pde_next;
-               while (1) {
-                       if (pptr->pde_end)
-                               break;
-                       pptr = &pdir[ppageno];
-                       /*
-                        *  If space id & virtual page number match, return
-                        *  "next PDIR entry of previous PDIR entry" as the
-                        *  physical page or'd with offset into page.
-                        */
-                       if (pptr->pde_space == space &&
-                           pptr->pde_page == vpageno) {
-                               phys = (CORE_ADDR) ((u_int)ptob(ppageno) |
-                                                   (addr & PGOFSET));
-                               break;
-                       }
-                       ppageno = pptr->pde_next;
-               }
-       }
-#ifdef MACHKERNELDEBUG
-       else if (kerneltype == OS_MACH) {
-         mach_vtophys(space, addr, &phys);
-       }
-#endif
-#if 0
-       printf("vtophys(%x.%x) -> %x\n", space, addr, phys);
-#endif
-       return (phys);
-}
-
-static
-kvread(addr)
-       CORE_ADDR addr;
-{
-       CORE_ADDR paddr;
-
-       paddr = vtophys(0, addr);
-       if (paddr != ~0)
-               if (physrd(paddr, (char *)&addr, sizeof(addr)) == 0)
-                       return (addr);
-
-       return (~0);
-}
-
-static void
-read_pcb(addr)
-     u_int addr;
-{
-       int i, off;
-       extern char registers[];
-       static int reg2pcb[] = {
-               /* RPB */
-               -1,  3,  4,  5,  6,  7,  8,  9, 10, 11, 12, 13, 14, 15, 16, 17,
-               18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33,
-               45, 52, 51, 75, 74, 49, 53, 54, 55, 56, -1, 70, 66, 67, 68, 69,
-               71, 72, 73, 34, 42, 43, 44, 46, 47, 58, 59, 60, -1, -1, -1, -1,
-               -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
-               -1, -1, -1, -1,
-               /* BSD */
-               -1,  0,  1,  2,  3,  4,  5,  6,  7,  8,  9, 10, 11, 12, 13, 14,
-               15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30,
-               43, 64, 67, 68, 67, 47, 51, 52, 53, 54, -1, 35, 31, 32, 33, 34,
-               36, 37, 38, 39, 40, 41, 42, 44, 45, 56, 57, 58,102,103,104, -1,
-               70, 71, 72, 73, 74, 75, 76, 77, 78, 80, 82, 84, 86, 88, 90, 92,
-               94, 96, 98, 100,
-               /* Mach */
-               -1, -1,  0,  1,  2,  3,  4,  5,  6,  7,  8,  9, 10, 11, 12, 13,
-               14, 15, 16, -1, -1, -1, -1, -1, -1, -1, -1, 17, -1, -1, 18, -1,
-               25, -1, -1, -1, -1, 30, -1, -1, -1, -1, -1, 20, -1, -1, -1, 19,
-               21, 22, 23, 24, 26, 27, -1, 28, 29, -1, -1, -1, -1, -1, -1, -1,
-               34, 35, 36, 37, 38, 39, 40, 41, -1, -1, -1, -1, -1, -1, -1, -1,
-               42, 44, 46, 48
-       };
-       static struct rpb *rpbaddr = (struct rpb *) 0;
-       static u_int rpbpcbaddr = 0;
-
-       if (!remote_debugging) {
-               /*
-                * If we are debugging a post-mortem and this is the first
-                * call of read_pcb, read the RPB.  Also assoicate the
-                * thread/proc running at the time with the RPB.
-                */
-               if (!devmem && rpbpcbaddr == 0) {
-                       CORE_ADDR raddr = ksym_lookup("rpb");
-                       int usepcb = 1;
-
-                       if (raddr != ~0) {
-                               rpbaddr = (struct rpb *) malloc(sizeof *rpbaddr);
-                               if (!physrd(raddr, (char *)rpbaddr, sizeof *rpbaddr)) {
-                                       rpbpcbaddr = addr;
-                                       usepcb = 0;
-                               }
-                       }
-                       if (usepcb) {
-                               error("cannot read rpb, using pcb for registers\n");
-                               if (rpbaddr)
-                                       free((char *)rpbaddr);
-                               rpbpcbaddr = ~0;
-                       }
-               }
-               if (physrd (addr, (char *)&pcb, sizeof pcb))
-                       error ("cannot read pcb at %x.\n", addr);
-       } else {
-               if (remote_read_inferior_memory(addr, (char *)&pcb, sizeof pcb))
-                       error ("cannot read pcb at %x.\n", addr);
-       }
-
-       if (kerneltype == OS_BSD) {
-               printf("p0br %lx p0lr %lx p1br %lx p1lr %lx\n",
-                      pcb.pcb_p0br, pcb.pcb_p0lr, pcb.pcb_p1br, pcb.pcb_p1lr);
-               off = NUM_REGS;
-       } else {
-               printf("pcb %lx psw %lx ksp %lx\n",
-                      addr, ((int *)&pcb)[31], ((int *)&pcb)[32]);
-               off = NUM_REGS * 2;
-       }
-       /*
-        * get the register values out of the sys pcb and
-        * store them where `read_register' will find them.
-        */
-       bzero(registers, REGISTER_BYTES);
-       for (i = 0; i < NUM_REGS; ++i)
-               if (reg2pcb[i+off] != -1)
-                       supply_register(i, &((int *)&pcb)[reg2pcb[i+off]]);
-       /*
-        * If the RPB is valid for this thread/proc use the register values
-        * contained there.
-        */
-       if (addr == rpbpcbaddr) {
-               off = 0;
-               for (i = 0; i < NUM_REGS; ++i)
-                       if (reg2pcb[i+off] != -1)
-                               supply_register(i, &((int *)rpbaddr)[reg2pcb[i+off]]);
-       }
-}
-
-void
-setup_kernel_debugging()
-{
-       struct stat stb;
-       CORE_ADDR addr;
-
-       fstat(corechan, &stb);
-       devmem = 0;
-       if ((stb.st_mode & S_IFMT) == S_IFCHR && stb.st_rdev == makedev(2, 0))
-               devmem = 1;
-
-       /* XXX */
-       if (lookup_misc_func("Sysmap") < 0)
-               kerneltype = OS_MACH;
-       else
-               kerneltype = OS_BSD;
-
-       if (kerneltype == OS_BSD) {
-               int len, err = 0;
-
-               /*
-                * Hash table and PDIR are equivalently mapped
-                */
-               nhtbl = kvread(ksym_lookup("nhtbl"));
-               if (nhtbl != ~0) {
-                       len = nhtbl * sizeof(*htbl);
-                       htbl = (struct hte *) malloc(len);
-                       if (htbl) {
-                               addr = kvread(ksym_lookup("htbl"));
-                               if (physrd(addr, (char *)htbl, len))
-                                       err++;
-                       } else
-                               err++;
-               } else
-                       err++;
-               npdir = kvread(ksym_lookup("npdir"));
-               if (npdir != ~0) {
-                       len = npdir * sizeof(*pdir);
-                       pdir = (struct pde *) malloc(len);
-                       if (pdir) {
-                               addr = kvread(ksym_lookup("pdir"));
-                               if (physrd(addr, (char *)pdir, len))
-                                       err++;
-                       } else
-                               err++;
-               } else
-                       err++;
-               if (err) {
-                       error("cannot read PDIR/HTBL");
-                       return;
-               }
-               vtophys_ready = 1;
-
-               /*
-                * pcb where "panic" saved registers in first thing in
-                * current u-area.  The current u-area is pointed to by
-                * "uptr".
-                */
-               addr = kvread(ksym_lookup("uptr"));
-               if (addr == ~0) {
-                       error("cannot read current u-area address");
-                       return;
-               }
-               read_pcb(vtophys(0, addr));     /* XXX space */
-               if (!devmem) {
-                       /* find stack frame */
-                       CORE_ADDR panicstr;
-                       char buf[256];
-                       register char *cp;
-                       
-                       panicstr = kvread(ksym_lookup("panicstr"));
-                       if (panicstr == ~0)
-                               return;
-                       kernel_core_file_hook(panicstr, buf, sizeof(buf));
-                       for (cp = buf; cp < &buf[sizeof(buf)] && *cp; cp++)
-                               if (!isascii(*cp) || (!isprint(*cp) && !isspace(*cp)))
-                                       *cp = '?';
-                       if (*cp)
-                               *cp = '\0';
-                       printf("panic: %s\n", buf);
-               }
-       }
-#ifdef MACHKERNELDEBUG
-       else {
-               int *thread;
-
-               /*
-                * Set up address translation
-                */
-               if (mach_vtophys_init() == 0) {
-                       error("cannot initialize vtophys for Mach");
-                       return;
-               }
-               vtophys_ready = 1;
-
-               /*
-                * Locate active thread and read PCB
-                * XXX MAJOR HACK
-                *      - assumes uni-processor
-                *      - assumes position of pcb to avoid mach includes
-                */
-               thread = (int *)kvread(ksym_lookup("active_threads"));
-               addr = kvread(&thread[9]);              /* XXX: pcb addr */
-               read_pcb(vtophys(0, addr));
-       }
-#endif
-}
-
-vtop_command(arg)
-       char *arg;
-{
-       u_int sp, off, pa;
-
-       if (!arg)
-               error_no_arg("kernel virtual address");
-       if (!kernel_debugging)
-               error("not debugging kernel");
-
-       sp = 0;         /* XXX */
-       off = (u_int) parse_and_eval_address(arg);
-       pa = vtophys(sp, off);
-       printf("%lx.%lx -> ", sp, off);
-       if (pa == ~0)
-               printf("<invalid>\n");
-       else
-               printf("%lx\n", pa);
-}
-
-set_paddr_command(arg)
-       char *arg;
-{
-       u_int addr;
-
-       if (!arg) {
-               if (kerneltype == OS_BSD)
-                       error_no_arg("ps-style address for new process");
-               else
-                       error_no_arg("thread structure virtual address");
-       }
-       if (!kernel_debugging)
-               error("not debugging kernel");
-
-       addr = (u_int) parse_and_eval_address(arg);
-       if (kerneltype == OS_BSD)
-               addr = ctob(addr);
-       else {
-               addr = kvread(&(((int *)addr)[9]));     /* XXX: pcb addr */
-               addr = vtophys(0, addr);                /* XXX space */
-       }
-       read_pcb(addr);
-
-       flush_cached_frames();
-       set_current_frame(create_new_frame(read_register(FP_REGNUM), read_pc()));
-       select_frame(get_current_frame(), 0);
-}
-
-/*
- * read len bytes from kernel virtual address 'addr' into local 
- * buffer 'buf'.  Return 0 if read ok, 1 otherwise.  On read
- * errors, portion of buffer not read is zeroed.
- */
-kernel_core_file_hook(addr, buf, len)
-       CORE_ADDR addr;
-       char *buf;
-       int len;
-{
-       int i;
-       CORE_ADDR paddr;
-
-       while (len > 0) {
-               paddr = vtophys(0, addr);       /* XXX space */
-               if (paddr == ~0) {
-                       bzero(buf, len);
-                       return (1);
-               }
-               /* we can't read across a page boundary */
-               i = min(len, NBPG - (addr & PGOFSET));
-               if (physrd(paddr, buf, i)) {
-                       bzero(buf, len);
-                       return (1);
-               }
-               buf += i;
-               addr += i;
-               len -= i;
-       }
-       return (0);
-}
-#endif
-
-
-\f
-
-
-/* Routines to extract various sized constants out of hppa 
-   instructions. */
-
-/* This assumes that no garbage lies outside of the lower bits of 
-   value. */
-
-int
-sign_extend (val, bits)
-     unsigned val, bits;
-{
-  return (int)(val >> bits - 1 ? (-1 << bits) | val : val);
-}
-
-/* For many immediate values the sign bit is the low bit! */
-
-int
-low_sign_extend (val, bits)
-     unsigned val, bits;
-{
-  return (int)((val & 0x1 ? (-1 << (bits - 1)) : 0) | val >> 1);
-}
-/* extract the immediate field from a ld{bhw}s instruction */
-
-
-
-unsigned
-get_field (val, from, to)
-     unsigned val, from, to;
-{
-  val = val >> 31 - to;
-  return val & ((1 << 32 - from) - 1);
-}
-
-unsigned
-set_field (val, from, to, new_val)
-     unsigned *val, from, to;
-{
-  unsigned mask = ~((1 << (to - from + 1)) << (31 - from));
-  return *val = *val & mask | (new_val << (31 - from));
-}
-
-/* extract a 3-bit space register number from a be, ble, mtsp or mfsp */
-
-extract_3 (word)
-     unsigned word;
-{
-  return GET_FIELD (word, 18, 18) << 2 | GET_FIELD (word, 16, 17);
-}
-       
-extract_5_load (word)
-     unsigned word;
-{
-  return low_sign_extend (word >> 16 & MASK_5, 5);
-}
-
-/* extract the immediate field from a st{bhw}s instruction */
-
-int
-extract_5_store (word)
-     unsigned word;
-{
-  return low_sign_extend (word & MASK_5, 5);
-}
-
-/* extract an 11 bit immediate field */
-
-int
-extract_11 (word)
-     unsigned word;
-{
-  return low_sign_extend (word & MASK_11, 11);
-}
-
-/* extract a 14 bit immediate field */
-
-int
-extract_14 (word)
-     unsigned word;
-{
-  return low_sign_extend (word & MASK_14, 14);
-}
-
-/* deposit a 14 bit constant in a word */
-
-unsigned
-deposit_14 (opnd, word)
-     int opnd;
-     unsigned word;
-{
-  unsigned sign = (opnd < 0 ? 1 : 0);
-
-  return word | ((unsigned)opnd << 1 & MASK_14)  | sign;
-}
-
-/* extract a 21 bit constant */
-
-int
-extract_21 (word)
-     unsigned word;
-{
-  int val;
-
-  word &= MASK_21;
-  word <<= 11;
-  val = GET_FIELD (word, 20, 20);
-  val <<= 11;
-  val |= GET_FIELD (word, 9, 19);
-  val <<= 2;
-  val |= GET_FIELD (word, 5, 6);
-  val <<= 5;
-  val |= GET_FIELD (word, 0, 4);
-  val <<= 2;
-  val |= GET_FIELD (word, 7, 8);
-  return sign_extend (val, 21) << 11;
-}
-
-/* deposit a 21 bit constant in a word. Although 21 bit constants are
-   usually the top 21 bits of a 32 bit constant, we assume that only
-   the low 21 bits of opnd are relevant */
-
-unsigned
-deposit_21 (opnd, word)
-     unsigned opnd, word;
-{
-  unsigned val = 0;
-
-  val |= GET_FIELD (opnd, 11 + 14, 11 + 18);
-  val <<= 2;
-  val |= GET_FIELD (opnd, 11 + 12, 11 + 13);
-  val <<= 2;
-  val |= GET_FIELD (opnd, 11 + 19, 11 + 20);
-  val <<= 11;
-  val |= GET_FIELD (opnd, 11 + 1, 11 + 11);
-  val <<= 1;
-  val |= GET_FIELD (opnd, 11 + 0, 11 + 0);
-  return word | val;
-}
-
-/* extract a 12 bit constant from branch instructions */
-
-int
-extract_12 (word)
-     unsigned word;
-{
-  return sign_extend (GET_FIELD (word, 19, 28) |
-                     GET_FIELD (word, 29, 29) << 10 |
-                     (word & 0x1) << 11, 12) << 2;
-}
-
-/* extract a 17 bit constant from branch instructions, returning the
-   19 bit signed value. */
-
-int
-extract_17 (word)
-     unsigned word;
-{
-  return sign_extend (GET_FIELD (word, 19, 28) |
-                     GET_FIELD (word, 29, 29) << 10 |
-                     GET_FIELD (word, 11, 15) << 11 |
-                     (word & 0x1) << 16, 17) << 2;
-}
-
-
-CORE_ADDR
-frame_saved_pc (frame)
-     FRAME frame;
-{
-  if (get_current_frame () == frame)
-    {
-      struct frame_saved_regs saved_regs;
-
-      get_frame_saved_regs (frame, &saved_regs);
-      if (saved_regs.regs[RP_REGNUM])
-       return read_memory_integer (saved_regs.regs[RP_REGNUM], 4);
-      else
-       return read_register (RP_REGNUM);
-    }
-  return read_memory_integer (frame->frame - 20, 4) & ~0x3;
-}
-
-/* To see if a frame chain is valid, see if the caller looks like it
-   was compiled with gcc. */
-
-int frame_chain_valid (chain, thisframe)
-     FRAME_ADDR chain;
-     FRAME thisframe;
-{
-  if (chain && (chain > 0x60000000 
-               /* || remote_debugging   -this is no longer used */
-#ifdef KERNELDEBUG
-               || kernel_debugging
-#endif
-               ))
-    {
-      CORE_ADDR pc = get_pc_function_start (FRAME_SAVED_PC (thisframe));
-
-      if (!inside_entry_file (pc))
-       return 0;
-      /* look for stw rp, -20(0,sp); copy 4,1; copy sp, 4 */
-      if (read_memory_integer (pc, 4) == 0x6BC23FD9)                   
-       pc = pc + 4;                                                    
-      
-      if (read_memory_integer (pc, 4) == 0x8040241 &&
-         read_memory_integer (pc + 4, 4) == 0x81E0244)                 
-       return 1;
-      else
-       return 0;
-    }
-  else
-    return 0;
-}
-
-/* Some helper functions. gcc_p returns 1 if the function beginning at 
-   pc appears to have been compiled with gcc. hpux_cc_p returns 1 if
-   fn was compiled with hpux cc. gcc functions look like :
-
-   stw     rp,-0x14(sp) ; optional
-   or      r4,r0,r1
-   or      sp,r0,r4
-   stwm    r1,framesize(sp)
-
-   hpux cc functions look like:
-
-   stw     rp,-0x14(sp) ; optional.
-   stwm    r3,framesiz(sp)
-   */
-
-gcc_p (pc)
-     CORE_ADDR pc;
-{
-  if (read_memory_integer (pc, 4) == 0x6BC23FD9)                       
-    pc = pc + 4;                                                       
-      
-  if (read_memory_integer (pc, 4) == 0x8040241 &&
-      read_memory_integer (pc + 4, 4) == 0x81E0244)                    
-    return 1;
-  return 0;
-}
-
-  
-find_dummy_frame_regs (frame, frame_saved_regs)
-     struct frame_info *frame;
-     struct frame_saved_regs *frame_saved_regs;
-{
-  CORE_ADDR fp = frame->frame;
-  int i;
-  
-  frame_saved_regs->regs[RP_REGNUM] = fp - 20 & ~0x3;
-  frame_saved_regs->regs[FP_REGNUM] = fp;
-  frame_saved_regs->regs[1] = fp + 8;
-  frame_saved_regs->regs[3] = fp + 12;
-  for (fp += 16, i = 3; i < 30; fp += 4, i++)
-    frame_saved_regs->regs[i] = fp;
-  frame_saved_regs->regs[31] = fp;
-  fp += 4;
-  for (i = FP0_REGNUM; i < NUM_REGS; i++, fp += 8)
-    frame_saved_regs->regs[i] = fp;
-  /* depend on last increment of fp */
-  frame_saved_regs->regs[IPSW_REGNUM] = fp - 4;
-  frame_saved_regs->regs[SAR_REGNUM] = fp;
-  fp += 4;
-  frame_saved_regs->regs[PCOQ_TAIL_REGNUM] = fp;
-  frame_saved_regs->regs[PCSQ_TAIL_REGNUM] = fp;
-}
-
-CORE_ADDR
-hp_push_arguments (nargs, args, sp, struct_return, struct_addr)
-     int nargs;
-     value *args;
-     CORE_ADDR sp;
-     int struct_return;
-     CORE_ADDR struct_addr;
-{
-  /* array of arguments' offsets */
-  int *offset = (int *)alloca(nargs);
-  int cum = 0;
-  int i, alignment;
-  
-  for (i = 0; i < nargs; i++)
-    {
-      cum += TYPE_LENGTH (VALUE_TYPE (args[i]));
-      /* value must go at proper alignment. Assume alignment is a
-        power of two.*/
-      alignment = hp_alignof (VALUE_TYPE (args[i]));
-      if (cum % alignment)
-       cum = (cum + alignment) & -alignment;
-      offset[i] = -cum;
-    }
-  for (i == 0; i < nargs; i++)
-    {
-      write_memory (sp + offset[i], VALUE_CONTENTS (args[i]), sizeof(int));
-    }
-  sp += min ((cum + 7) & -8, 48);
-  if (struct_return)
-    write_register (28, struct_addr);
-  return sp + 48;
-}
-
-/* return the alignment of a type in bytes. Structures have the maximum
-   alignment required by their fields. */
-
-int
-hp_alignof (arg)
-     struct type *arg;
-{
-  int max_align, align, i;
-  switch (TYPE_CODE (arg))
-    {
-    case TYPE_CODE_PTR:
-    case TYPE_CODE_INT:
-    case TYPE_CODE_FLT:
-      return TYPE_LENGTH (arg);
-    case TYPE_CODE_ARRAY:
-      return hp_alignof (TYPE_FIELD_TYPE (arg, 0));
-    case TYPE_CODE_STRUCT:
-    case TYPE_CODE_UNION:
-      max_align = 2;
-      for (i = 0; i < TYPE_NFIELDS (arg); i++)
-       {
-         /* Bit fields have no real alignment. */
-         if (!TYPE_FIELD_BITPOS (arg, i))
-           {
-             align = hp_alignof (TYPE_FIELD_TYPE (arg, i));
-             max_align = max (max_align, align);
-           }
-       }
-      return max_align;
-    default:
-      return 4;
-    }
-}
-
-/* Print the register regnum, or all registers if regnum is -1 */
-
-pa_do_registers_info (regnum, fpregs)
-     int regnum;
-     int fpregs;
-{
-  char raw_regs [REGISTER_BYTES];
-  int i;
-  
-  for (i = 0; i < NUM_REGS; i++)
-    read_relative_register_raw_bytes (i, raw_regs + REGISTER_BYTE (i));
-  if (regnum = -1)
-    pa_print_registers (raw_regs, regnum);
-  else if (regnum < FP0_REGNUM)
-    {
-      printf ("%s %x\n", reg_names[regnum], *(long *)(raw_regs +
-                                                     REGISTER_BYTE (regnum)));
-    }
-  else
-    pa_print_fp_reg (regnum);
-}
-
-pa_print_registers (raw_regs, regnum)
-     char *raw_regs;
-     int regnum;
-{
-  int i;
-
-  for (i = 0; i < 18; i++)
-    printf ("%8.8s: %8x  %8.8s: %8x  %8.8s: %8x  %8.8s: %8x\n",
-                    reg_names[i],
-                    *(int *)(raw_regs + REGISTER_BYTE (i)),
-                    reg_names[i + 18],
-                    *(int *)(raw_regs + REGISTER_BYTE (i + 18)),
-                    reg_names[i + 36],
-                    *(int *)(raw_regs + REGISTER_BYTE (i + 36)),
-                    reg_names[i + 54],
-                    *(int *)(raw_regs + REGISTER_BYTE (i + 54)));
-  for (i = 72; i < NUM_REGS; i++)
-    pa_print_fp_reg (i);
-}
-
-pa_print_fp_reg (i)
-     int i;
-{
-  unsigned char raw_buffer[MAX_REGISTER_RAW_SIZE];
-  unsigned char virtual_buffer[MAX_REGISTER_VIRTUAL_SIZE];
-  REGISTER_TYPE val;
-
-  /* Get the data in raw format, then convert also to virtual format.  */
-  read_relative_register_raw_bytes (i, raw_buffer);
-  REGISTER_CONVERT_TO_VIRTUAL (i, raw_buffer, virtual_buffer);
-
-  fputs_filtered (reg_names[i], stdout);
-  print_spaces_filtered (15 - strlen (reg_names[i]), stdout);
-
-  val_print (REGISTER_VIRTUAL_TYPE (i), virtual_buffer, 0, stdout, 0,
-            1, 0, Val_pretty_default);
-  printf_filtered ("\n");
-
-}
-
-/*
- * Virtual to physical translation routines for Utah's Mach 3.0
- */
-#ifdef MACHKERNELDEBUG
-
-#define STATIC
-
-#if 0  /* too many includes to resolve, too much crap */
-#include <kern/queue.h>
-#include <vm/pmap.h>   
-#include <mach/vm_prot.h>
-#else
-/* queue.h */
-struct queue_entry {
-       struct queue_entry      *next;          /* next element */
-       struct queue_entry      *prev;          /* previous element */
-};
-
-typedef struct queue_entry     *queue_t;
-typedef        struct queue_entry      queue_head_t;
-typedef        struct queue_entry      queue_chain_t;
-typedef        struct queue_entry      *queue_entry_t;
-
-/* pmap.h */
-#define HP800_HASHSIZE         1024
-#define HP800_HASHSIZE_LOG2    10
-
-#define pmap_hash(space, offset) \
-       (((unsigned) (space) << 5 ^ \
-         ((unsigned) (offset) >> 19 | (unsigned) (space) << 13) ^ \
-         (unsigned) (offset) >> 11) & (HP800_HASHSIZE-1))
-
-struct mapping {
-       queue_head_t    hash_link;      /* hash table links */
-       queue_head_t    phys_link;      /* for mappings of a given PA */
-       space_t         space;          /* virtual space */
-       unsigned        offset;         /* virtual page number */
-       unsigned        tlbpage;        /* physical page (for TLB load) */
-       unsigned        tlbprot;        /* prot/access rights (for TLB load) */
-       struct pmap     *pmap;          /* pmap mapping belongs to */
-};
-
-struct phys_entry {
-       queue_head_t    phys_link;      /* head of mappings of a given PA */
-       struct mapping  *writer;        /* mapping with R/W access */
-       unsigned        tlbprot;        /* TLB format protection */
-};
-
-#endif
-
-#define atop(a)                ((unsigned)(a) >> 11)
-#define ptoa(p)                ((unsigned)(p) << 11)
-#define trunc_page(a)  ((unsigned)(a) & ~2047)
-
-STATIC long equiv_end;
-STATIC queue_head_t *Ovtop_table, *vtop_table, *Ofree_mapping, free_mapping;
-STATIC struct phys_entry *Ophys_table, *phys_table;
-STATIC long vm_last_phys, vm_first_phys;
-STATIC struct mapping *firstmap, *lastmap, *Omap_table, *map_table;
-STATIC unsigned Omlow, Omhigh, Omhead, Ovlow, Ovhigh, Oplow, Ophigh;
-STATIC unsigned mlow, mhigh, mhead, vlow, vhigh, plow, phigh;
-STATIC int vtopsize, physsize, mapsize;
-STATIC int kmemfd;
-
-#define IS_OVTOPPTR(p) ((unsigned)(p) >= Ovlow && (unsigned)(p) < Ovhigh)
-#define IS_OMAPPTR(p)  ((unsigned)(p) >= Omlow && (unsigned)(p) < Omhigh)
-#define IS_OPHYSPTR(p) ((unsigned)(p) >= Oplow && (unsigned)(p) < Ophigh)
-#define IS_VTOPPTR(p)  ((unsigned)(p) >= vlow && (unsigned)(p) < vhigh)
-#define IS_MAPPTR(p)   ((unsigned)(p) >= mlow && (unsigned)(p) < mhigh)
-#define IS_PHYSPTR(p)  ((unsigned)(p) >= plow && (unsigned)(p) < phigh)
-
-struct mapstate {
-       char    unused;
-       char    flags;
-       short   hashix;
-       short   physix;
-} *mapstate;
-
-/* flags */
-#define M_ISFREE       1
-#define M_ISHASH       2
-#define M_ISPHYS       4
-
-mach_vtophys_init()
-{
-       int errors = 0;
-
-       if (!readdata())
-               errors++;
-       if (!verifydata())
-               errors++;
-       if (!errors)
-               return(1);
-       fflush(stdout);
-       fprintf(stderr,
-               "translate: may not be able to translate all addresses\n");
-       return(0);
-}
-
-mach_vtophys(space, off, pa)
-       unsigned space, off, *pa;
-{
-       register int i;
-       register queue_t qp;
-       register struct mapping *mp;
-       int poff;
-
-       /*
-        * Kernel IO or equivilently mapped, one to one.
-        */
-       if (space == 0 && (long)off < equiv_end) {
-               *pa = off;
-               return(1);
-       }
-       /*
-        * Else look it up in specified space
-        */
-       poff = off - trunc_page(off);
-       off = trunc_page(off);
-       qp = &vtop_table[pmap_hash(space, off)];
-       for (mp = (struct mapping *)qp->next;
-            qp != (queue_entry_t)mp;
-            mp = (struct mapping *)mp->hash_link.next) {
-               if (mp->space == space && mp->offset == off) {
-                       *pa = (mp->tlbpage << 7) | poff;
-                       return(1);
-               }
-       }
-       return(0);
-}
-
-STATIC
-readdata()
-{
-       char *tmp, *mach_malloc();
-       long size;
-
-       /* easy scalars */
-       mach_read("equiv_end", ~0, (char *)&equiv_end, sizeof equiv_end);
-       mach_read("vm_first_phys", ~0,
-                 (char *)&vm_first_phys, sizeof vm_first_phys);
-       mach_read("vm_last_phys", ~0,
-                 (char *)&vm_last_phys, sizeof vm_last_phys);
-       mach_read("firstmap", ~0, (char *)&firstmap, sizeof firstmap);
-       mach_read("lastmap", ~0, (char *)&lastmap, sizeof lastmap);
-
-       /* virtual to physical hash table */
-       vtopsize = HP800_HASHSIZE;
-       size = vtopsize * sizeof(queue_head_t);
-       tmp = mach_malloc("vtop table", size);
-       mach_read("vtop_table", ~0, (char *)&Ovtop_table, sizeof Ovtop_table);
-       mach_read("vtop table", (CORE_ADDR)Ovtop_table, tmp, size);
-       vtop_table = (queue_head_t *) tmp;
-
-       /* inverted page table */
-       physsize = atop(vm_last_phys - vm_first_phys);
-       size = physsize * sizeof(struct phys_entry);
-       tmp = mach_malloc("phys table", size);
-       mach_read("phys_table", ~0, (char *)&Ophys_table, sizeof Ophys_table);
-       mach_read("phys table", (CORE_ADDR)Ophys_table, tmp, size);
-       phys_table = (struct phys_entry *) tmp;
-
-       /* mapping structures */
-       Ofree_mapping = (queue_head_t *) ksym_lookup("free_mapping");
-       mach_read("free mapping", (CORE_ADDR)Ofree_mapping,
-                 (char *) &free_mapping, sizeof free_mapping);
-       Omap_table = firstmap;
-       mapsize = lastmap - firstmap;
-       size = mapsize * sizeof(struct mapping);
-       tmp = mach_malloc("mapping table", size);
-       mach_read("mapping table", (CORE_ADDR)Omap_table, tmp, size);
-       map_table = (struct mapping *) tmp;
-
-       /* set limits */
-       Ovlow = (unsigned) Ovtop_table;
-       Ovhigh = (unsigned) &Ovtop_table[vtopsize];
-       Oplow = (unsigned) Ophys_table;
-       Ophigh = (unsigned) &Ophys_table[physsize];
-       Omhead = (unsigned) Ofree_mapping;
-       Omlow = (unsigned) firstmap;
-       Omhigh = (unsigned) lastmap;
-       mlow = (unsigned) map_table;
-       mhigh = (unsigned) &map_table[mapsize];
-       mhead = (unsigned) &free_mapping;
-       vlow = (unsigned) vtop_table;
-       vhigh = (unsigned) &vtop_table[vtopsize];
-       plow = (unsigned) phys_table;
-       phigh = (unsigned) &phys_table[physsize];
-
-#if 0
-       fprintf(stderr, "Ovtop [%#x-%#x) Ophys [%#x-%#x) Omap %#x [%#x-%#x)\n",
-               Ovlow, Ovhigh, Oplow, Ophigh, Omhead, Omlow, Omhigh);
-       fprintf(stderr, "vtop [%#x-%#x) phys [%#x-%#x) map %#x [%#x-%#x)\n",
-               vlow, vhigh, plow, phigh, mhead, mlow, mhigh);
-#endif
-       return(adjustdata());
-}
-
-STATIC unsigned
-ptrcvt(ptr)
-       unsigned ptr;
-{
-       unsigned ret;
-       char *str;
-
-       if (ptr == 0) {
-               ret = ptr;
-               str = "null";
-       } else if (IS_OVTOPPTR(ptr)) {
-               ret = vlow + (ptr - Ovlow);
-               str = "vtop";
-       } else if (IS_OPHYSPTR(ptr)) {
-               ret = plow + (ptr - Oplow);
-               str = "phys";
-       } else if (IS_OMAPPTR(ptr)) {
-               ret = mlow + (ptr - Omlow);
-               str = "map";
-       } else if (ptr == Omhead) {
-               ret = mhead;
-               str = "maphead";
-       } else {
-               error("bogus pointer %#x", ptr);
-               str = "wild";
-               ret = ptr;
-       }
-#if 0
-       fprintf(stderr, "%x (%s) -> %x\n", ptr, str, ret);
-#endif
-       return(ret);
-}
-
-STATIC int
-adjustdata()
-{
-       register int i, lim;
-       queue_head_t *nq;
-       struct phys_entry *np;
-       struct mapping *nm;
-
-       /* hash table */
-       lim = vtopsize;
-       for (nq = vtop_table; nq < &vtop_table[lim]; nq++) {
-               nq->next = (queue_entry_t) ptrcvt((unsigned)nq->next);
-               nq->prev = (queue_entry_t) ptrcvt((unsigned)nq->prev);
-       }
-
-       /* IPT */
-       lim = physsize;
-       for (np = phys_table; np < &phys_table[lim]; np++) {
-               np->phys_link.next = (queue_entry_t)
-                       ptrcvt((unsigned)np->phys_link.next);
-               np->phys_link.prev = (queue_entry_t)
-                       ptrcvt((unsigned)np->phys_link.prev);
-               np->writer = (struct mapping *) ptrcvt((unsigned)np->writer);
-       }
-
-       /* mapping table */
-       free_mapping.next = (queue_entry_t)ptrcvt((unsigned)free_mapping.next);
-       free_mapping.prev = (queue_entry_t)ptrcvt((unsigned)free_mapping.prev);
-       lim = mapsize;
-       for (nm = map_table; nm < &map_table[lim]; nm++) {
-               nm->hash_link.next = (queue_entry_t)
-                       ptrcvt((unsigned)nm->hash_link.next);
-               nm->hash_link.prev = (queue_entry_t)
-                       ptrcvt((unsigned)nm->hash_link.prev);
-               nm->phys_link.next = (queue_entry_t)
-                       ptrcvt((unsigned)nm->phys_link.next);
-               nm->phys_link.prev = (queue_entry_t)
-                       ptrcvt((unsigned)nm->phys_link.prev);
-       }
-       return(1);
-}
-
-/*
- * Consistency checks, make sure:
- *
- *     1. all mappings are accounted for
- *     2. no cycles
- *     3. no wild pointers
- *     4. consisent TLB state
- */
-STATIC int
-verifydata()
-{
-       register struct mapstate *ms;
-       register int i;
-       int errors = 0;
-
-       mapstate = (struct mapstate *)
-               mach_malloc("map state", mapsize * sizeof(struct mapstate));
-       for (ms = mapstate; ms < &mapstate[mapsize]; ms++) {
-               ms->flags = 0;
-               ms->hashix = ms->physix = -2;
-       }
-
-       /*
-        * Check the free list
-        */
-       checkhashchain(&free_mapping, M_ISFREE, -1);
-       /*
-        * Check every hash chain
-        */
-       for (i = 0; i < vtopsize; i++)
-               checkhashchain(&vtop_table[i], M_ISHASH, i);
-       /*
-        * Check every phys chain
-        */
-       for (i = 0; i < physsize; i++)
-               checkphyschain(&phys_table[i].phys_link, M_ISPHYS, i);
-       /*
-        * Cycle through mapstate looking for anomolies
-        */
-       ms = mapstate;
-       for (i = 0; i < mapsize; i++) {
-               switch (ms->flags) {
-               case M_ISFREE:
-               case M_ISHASH|M_ISPHYS:
-                       break;
-               case 0:
-                       merror(ms, "not found");
-                       errors++;
-                       break;
-               case M_ISHASH:
-                       merror(ms, "in vtop but not phys");
-                       errors++;
-                       break;
-               case M_ISPHYS:
-                       merror(ms, "in phys but not vtop");
-                       errors++;
-                       break;
-               default:
-                       merror(ms, "totally bogus");
-                       errors++;
-                       break;
-               }
-               ms++;
-       }
-       return(errors ? 0 : 1);
-}
-
-STATIC void
-checkhashchain(qhp, flag, ix)
-       queue_entry_t qhp;
-{
-       register queue_entry_t qp, pqp;
-       register struct mapping *mp;
-       struct mapstate *ms;
-
-       qp = qhp->next;
-       /*
-        * First element is not a mapping structure,
-        * chain must be empty.
-        */
-       if (!IS_MAPPTR(qp)) {
-               if (qp != qhp || qp != qhp->prev)
-                       fatal("bad vtop_table header pointer");
-       } else {
-               pqp = qhp;
-               do {
-                       mp = (struct mapping *) qp;
-                       qp = &mp->hash_link;
-                       if (qp->prev != pqp)
-                               fatal("bad hash_link prev pointer");
-                       ms = &mapstate[mp-map_table];
-                       ms->flags |= flag;
-                       ms->hashix = ix;
-                       pqp = (queue_entry_t) mp;
-                       qp = qp->next;
-               } while (IS_MAPPTR(qp));
-               if (qp != qhp)
-                       fatal("bad hash_link next pointer");
-       }
-}
-
-STATIC void
-checkphyschain(qhp, flag, ix)
-       queue_entry_t qhp;
-{
-       register queue_entry_t qp, pqp;
-       register struct mapping *mp;
-       struct mapstate *ms;
-
-       qp = qhp->next;
-       /*
-        * First element is not a mapping structure,
-        * chain must be empty.
-        */
-       if (!IS_MAPPTR(qp)) {
-               if (qp != qhp || qp != qhp->prev)
-                       fatal("bad phys_table header pointer");
-       } else {
-               pqp = qhp;
-               do {
-                       mp = (struct mapping *) qp;
-                       qp = &mp->phys_link;
-                       if (qp->prev != pqp)
-                               fatal("bad phys_link prev pointer");
-                       ms = &mapstate[mp-map_table];
-                       ms->flags |= flag;
-                       ms->physix = ix;
-                       pqp = (queue_entry_t) mp;
-                       qp = qp->next;
-               } while (IS_MAPPTR(qp));
-               if (qp != qhp)
-                       fatal("bad phys_link next pointer");
-       }
-}
-
-STATIC void
-merror(ms, str)
-       struct mapstate *ms;
-       char *str;
-{
-       terminal_ours();
-       fflush(stdout);
-       fprintf(stderr,
-               "vtophys: %s: %c%c%c, hashix %d, physix %d, mapping %x\n",
-               str,
-               (ms->flags & M_ISFREE) ? 'F' : '-',
-               (ms->flags & M_ISHASH) ? 'H' : '-',
-               (ms->flags & M_ISPHYS) ? 'P' : '-',
-               ms->hashix, ms->physix, &map_table[ms-mapstate]);
-       return_to_top_level();
-}
-
-STATIC int
-mach_read(str, from, top, size)
-       char *str;
-       CORE_ADDR from;
-       char *top;
-       int size;
-{
-       CORE_ADDR paddr;
-
-       if (from == ~0)
-               from = ksym_lookup(str);
-       paddr = vtophys(0, from);
-       if (paddr == ~0 || physrd(paddr, top, size) != 0)
-               fatal("cannot read %s", str);
-}
-
-STATIC char *
-mach_malloc(str, size)
-       char *str;
-       int size;
-{
-       char *ptr = (char *) malloc(size);
-
-       if (ptr == 0)
-               fatal("no memory for %s", str);
-       return(ptr);
-}
-#endif
-
-#ifdef KERNELDEBUG
-void
-_initialize_hp9k8_dep()
-{
-       add_com ("process-address", class_obscure, set_paddr_command,
-"The process identified by (ps-style) ADDR becomes the\n\
-\"current\" process context for kernel debugging.");
-       add_com_alias ("paddr", "process-address", class_obscure, 0);
-       add_com ("virtual-to-physical", class_obscure, vtop_command,
-"Translates the kernel virtual address ADDR into a physical address.");
-       add_com_alias ("vtop", "virtual-to-physical", class_obscure, 0);
-}
-#endif
index bec14c4..e69de29 100644 (file)
@@ -1,413 +0,0 @@
-/* Machine-dependent code which would otherwise be in infptrace.c,
-   for GDB, the GNU debugger.  This code is for the HP PA-RISC cpu.
-   Copyright 1986, 1987, 1989, 1990, 1991, 1992 Free Software Foundation, Inc.
-
-   Contributed by the Center for Software Science at the
-   University of Utah (pa-gdb-bugs@cs.utah.edu).
-
-/* Low level Unix child interface to ptrace, for GDB when running under Unix.
-   Copyright (C) 1988, 1989, 1990, 1991 Free Software Foundation, Inc.
-
-This file is part of GDB.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-#include "defs.h"
-#include "frame.h"
-#include "inferior.h"
-#include "target.h"
-
-#ifdef USG
-#include <sys/types.h>
-#endif
-
-#include <sys/param.h>
-#include <sys/dir.h>
-#include <signal.h>
-#include <sys/ioctl.h>
-#ifndef USG
-#include <sys/ptrace.h>
-#endif
-
-
-#ifndef PT_ATTACH
-#define PT_ATTACH PTRACE_ATTACH
-#endif
-#ifndef PT_DETACH
-#define PT_DETACH PTRACE_DETACH
-#endif
-
-#include "gdbcore.h"
-#include <sys/user.h>          /* After a.out.h  */
-#include <sys/file.h>
-#include <sys/stat.h>
-\f
-/* This function simply calls ptrace with the given arguments.  
-   It exists so that all calls to ptrace are isolated in this 
-   machine-dependent file. */
-int
-call_ptrace (request, pid, addr, data)
-     int request, pid;
-     PTRACE_ARG3_TYPE addr;
-     int data;
-{
-  return ptrace (request, pid, addr, data);
-}
-
-#ifdef DEBUG_PTRACE
-/* For the rest of the file, use an extra level of indirection */
-/* This lets us breakpoint usefully on call_ptrace. */
-#define ptrace call_ptrace
-#endif
-
-void
-kill_inferior ()
-{
-  if (inferior_pid == 0)
-    return;
-  ptrace (PT_KILL, inferior_pid, (PTRACE_ARG3_TYPE) 0, 0);
-  wait ((int *)0);
-  target_mourn_inferior ();
-}
-
-/* Resume execution of the inferior process.
-   If STEP is nonzero, single-step it.
-   If SIGNAL is nonzero, give it that signal.  */
-
-void
-child_resume (step, signal)
-     int step;
-     int signal;
-{
-  errno = 0;
-
-  /* An address of (PTRACE_ARG3_TYPE) 1 tells ptrace to continue from where
-     it was. (If GDB wanted it to start some other way, we have already
-     written a new PC value to the child.)  */
-
-  if (step)
-    ptrace (PT_STEP, inferior_pid, (PTRACE_ARG3_TYPE) 1, signal);
-  else
-    ptrace (PT_CONTINUE, inferior_pid, (PTRACE_ARG3_TYPE) 1, signal);
-
-  if (errno)
-    perror_with_name ("ptrace");
-}
-\f
-#ifdef ATTACH_DETACH
-/* Nonzero if we are debugging an attached process rather than
-   an inferior.  */
-extern int attach_flag;
-
-/* Start debugging the process whose number is PID.  */
-int
-attach (pid)
-     int pid;
-{
-  errno = 0;
-  ptrace (PT_ATTACH, pid, (PTRACE_ARG3_TYPE) 0, 0);
-  if (errno)
-    perror_with_name ("ptrace");
-  attach_flag = 1;
-  return pid;
-}
-
-/* Stop debugging the process whose number is PID
-   and continue it with signal number SIGNAL.
-   SIGNAL = 0 means just continue it.  */
-
-void
-detach (signal)
-     int signal;
-{
-  errno = 0;
-  ptrace (PT_DETACH, inferior_pid, (PTRACE_ARG3_TYPE) 1, signal);
-  if (errno)
-    perror_with_name ("ptrace");
-  attach_flag = 0;
-}
-#endif /* ATTACH_DETACH */
-\f
-#if !defined (FETCH_INFERIOR_REGISTERS)
-
-/* KERNEL_U_ADDR is the amount to subtract from u.u_ar0
-   to get the offset in the core file of the register values.  */
-#if defined (KERNEL_U_ADDR_BSD)
-/* Get kernel_u_addr using BSD-style nlist().  */
-CORE_ADDR kernel_u_addr;
-
-#include <a.out.gnu.h>         /* For struct nlist */
-
-void
-_initialize_kernel_u_addr ()
-{
-  struct nlist names[2];
-
-  names[0].n_un.n_name = "_u";
-  names[1].n_un.n_name = NULL;
-  if (nlist ("/vmunix", names) == 0)
-    kernel_u_addr = names[0].n_value;
-  else
-    fatal ("Unable to get kernel u area address.");
-}
-#endif /* KERNEL_U_ADDR_BSD.  */
-
-#if defined (KERNEL_U_ADDR_HPUX)
-/* Get kernel_u_addr using HPUX-style nlist().  */
-CORE_ADDR kernel_u_addr;
-
-struct hpnlist {      
-        char *          n_name;
-        long            n_value;  
-        unsigned char   n_type;   
-        unsigned char   n_length;  
-        short           n_almod;   
-        short           n_unused;
-};
-static struct hpnlist nl[] = {{ "_u", -1, }, { (char *) 0, }};
-
-/* read the value of the u area from the hp-ux kernel */
-void _initialize_kernel_u_addr ()
-{
-    struct user u;
-    nlist ("/hp-ux", &nl);
-    kernel_u_addr = nl[0].n_value;
-}
-#endif /* KERNEL_U_ADDR_HPUX.  */
-
-#if !defined (offsetof)
-#define offsetof(TYPE, MEMBER) ((unsigned long) &((TYPE *)0)->MEMBER)
-#endif
-
-/* U_REGS_OFFSET is the offset of the registers within the u area.  */
-#if !defined (U_REGS_OFFSET)
-#define U_REGS_OFFSET \
-  ptrace (PT_READ_U, inferior_pid, \
-          (PTRACE_ARG3_TYPE) (offsetof (struct user, u_ar0)), 0) \
-    - KERNEL_U_ADDR
-#endif
-
-/* Registers we shouldn't try to fetch.  */
-#if !defined (CANNOT_FETCH_REGISTER)
-#define CANNOT_FETCH_REGISTER(regno) 0
-#endif
-
-/* Fetch one register.  */
-
-static void
-fetch_register (regno)
-     int regno;
-{
-  register unsigned int regaddr;
-  char buf[MAX_REGISTER_RAW_SIZE];
-  char mess[128];                              /* For messages */
-  register int i;
-
-  /* Offset of registers within the u area.  */
-  unsigned int offset;
-
-  if (CANNOT_FETCH_REGISTER (regno))
-    {
-      bzero (buf, REGISTER_RAW_SIZE (regno));  /* Supply zeroes */
-      supply_register (regno, buf);
-      return;
-    }
-
-  offset = U_REGS_OFFSET;
-
-  regaddr = register_addr (regno, offset);
-  for (i = 0; i < REGISTER_RAW_SIZE (regno); i += sizeof (int))
-    {
-      errno = 0;
-      *(int *) &buf[i] = ptrace (PT_RUREGS, inferior_pid,
-                                (PTRACE_ARG3_TYPE) regaddr, 0);
-      regaddr += sizeof (int);
-      if (errno != 0)
-       {
-         sprintf (mess, "reading register %s (#%d)", reg_names[regno], regno);
-         perror_with_name (mess);
-       }
-    }
-  if (regno == PCOQ_HEAD_REGNUM || regno == PCOQ_TAIL_REGNUM)
-    buf[3] &= ~0x3;
-  supply_register (regno, buf);
-}
-
-
-/* Fetch all registers, or just one, from the child process.  */
-
-void
-fetch_inferior_registers (regno)
-     int regno;
-{
-  if (regno == -1)
-    for (regno = 0; regno < NUM_REGS; regno++)
-      fetch_register (regno);
-  else
-    fetch_register (regno);
-}
-
-/* Registers we shouldn't try to store.  */
-#if !defined (CANNOT_STORE_REGISTER)
-#define CANNOT_STORE_REGISTER(regno) 0
-#endif
-
-/* Store our register values back into the inferior.
-   If REGNO is -1, do this for all registers.
-   Otherwise, REGNO specifies which register (so we can save time).  */
-
-void
-store_inferior_registers (regno)
-     int regno;
-{
-  register unsigned int regaddr;
-  char buf[80];
-  extern char registers[];
-  register int i;
-
-  unsigned int offset = U_REGS_OFFSET;
-
-  if (regno >= 0)
-    {
-      regaddr = register_addr (regno, offset);
-      for (i = 0; i < REGISTER_RAW_SIZE (regno); i += sizeof(int))
-       {
-         errno = 0;
-         ptrace (PT_WRITE_U, inferior_pid, (PTRACE_ARG3_TYPE) regaddr,
-                 *(int *) &registers[REGISTER_BYTE (regno) + i]);
-         if (errno != 0)
-           {
-             sprintf (buf, "writing register number %d(%d)", regno, i);
-             perror_with_name (buf);
-           }
-         regaddr += sizeof(int);
-       }
-    }
-  else
-    {
-      for (regno = 0; regno < NUM_REGS; regno++)
-       {
-         if (CANNOT_STORE_REGISTER (regno))
-           continue;
-         regaddr = register_addr (regno, offset);
-         for (i = 0; i < REGISTER_RAW_SIZE (regno); i += sizeof(int))
-           {
-             errno = 0;
-             ptrace (PT_WRITE_U, inferior_pid, (PTRACE_ARG3_TYPE) regaddr,
-                     *(int *) &registers[REGISTER_BYTE (regno) + i]);
-             if (errno != 0)
-               {
-                 sprintf (buf, "writing register number %d(%d)", regno, i);
-                 perror_with_name (buf);
-               }
-             regaddr += sizeof(int);
-           }
-       }
-    }
-  return;
-}
-#endif /* !defined (FETCH_INFERIOR_REGISTERS).  */
-\f
-/* NOTE! I tried using PTRACE_READDATA, etc., to read and write memory
-   in the NEW_SUN_PTRACE case.
-   It ought to be straightforward.  But it appears that writing did
-   not write the data that I specified.  I cannot understand where
-   it got the data that it actually did write.  */
-
-/* Copy LEN bytes to or from inferior's memory starting at MEMADDR
-   to debugger memory starting at MYADDR.   Copy to inferior if
-   WRITE is nonzero.
-  
-   Returns the length copied, which is either the LEN argument or zero.
-   This xfer function does not do partial moves, since child_ops
-   doesn't allow memory operations to cross below us in the target stack
-   anyway.  */
-
-int
-child_xfer_memory (memaddr, myaddr, len, write, target)
-     CORE_ADDR memaddr;
-     char *myaddr;
-     int len;
-     int write;
-     struct target_ops *target;                /* ignored */
-{
-  register int i;
-  /* Round starting address down to longword boundary.  */
-  register CORE_ADDR addr = memaddr & - sizeof (int);
-  /* Round ending address up; get number of longwords that makes.  */
-  register int count
-    = (((memaddr + len) - addr) + sizeof (int) - 1) / sizeof (int);
-  /* Allocate buffer of that many longwords.  */
-  register int *buffer = (int *) alloca (count * sizeof (int));
-
-  if (write)
-    {
-      /* Fill start and end extra bytes of buffer with existing memory data.  */
-
-      if (addr != memaddr || len < (int)sizeof (int)) {
-       /* Need part of initial word -- fetch it.  */
-        buffer[0] = ptrace (PT_READ_I, inferior_pid, (PTRACE_ARG3_TYPE) addr,
-                           0);
-      }
-
-      if (count > 1)           /* FIXME, avoid if even boundary */
-       {
-         buffer[count - 1]
-           = ptrace (PT_READ_I, inferior_pid,
-                     (PTRACE_ARG3_TYPE) (addr + (count - 1) * sizeof (int)),
-                     0);
-       }
-
-      /* Copy data to be written over corresponding part of buffer */
-
-      bcopy (myaddr, (char *) buffer + (memaddr & (sizeof (int) - 1)), len);
-
-      /* Write the entire buffer.  */
-
-      for (i = 0; i < count; i++, addr += sizeof (int))
-       {
-         errno = 0;
-         ptrace (PT_WRITE_D, inferior_pid, (PTRACE_ARG3_TYPE) addr,
-                 buffer[i]);
-         if (errno)
-           {
-             /* Using the appropriate one (I or D) is necessary for
-                Gould NP1, at least.  */
-             errno = 0;
-             ptrace (PT_WRITE_I, inferior_pid, (PTRACE_ARG3_TYPE) addr,
-                     buffer[i]);
-           }
-         if (errno)
-           return 0;
-       }
-    }
-  else
-    {
-      /* Read all the longwords */
-      for (i = 0; i < count; i++, addr += sizeof (int))
-       {
-         errno = 0;
-         buffer[i] = ptrace (PT_READ_I, inferior_pid,
-                             (PTRACE_ARG3_TYPE) addr, 0);
-         if (errno)
-           return 0;
-         QUIT;
-       }
-
-      /* Copy appropriate bytes out of the buffer.  */
-      bcopy ((char *) buffer + (memaddr & (sizeof (int) - 1)), myaddr, len);
-    }
-  return len;
-}
index a556998..e69de29 100644 (file)
@@ -1,417 +0,0 @@
-/* Host-dependent code for HP PA-RISC runing HP/UX, for GDB.
-   Copyright 1986, 1987, 1989, 1990, 1991, 1992 Free Software Foundation, Inc.
-   Contributed by the Center for Software Science at the
-   University of Utah (pa-gdb-bugs@cs.utah.edu).
-
-This file is part of GDB.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-#include "defs.h"
-#include "frame.h"
-#include "inferior.h"
-#include "target.h"
-
-#ifdef USG
-#include <sys/types.h>
-#endif
-
-#include <sys/param.h>
-#include <sys/dir.h>
-#include <signal.h>
-#include <sys/ioctl.h>
-
-#include <sys/ptrace.h>
-
-
-#ifndef PT_ATTACH
-#define PT_ATTACH PTRACE_ATTACH
-#endif
-#ifndef PT_DETACH
-#define PT_DETACH PTRACE_DETACH
-#endif
-
-#include "gdbcore.h"
-\f
-/* This function simply calls ptrace with the given arguments.  
-   It exists so that all calls to ptrace are isolated in this 
-   machine-dependent file. */
-int
-call_ptrace (request, pid, addr, data)
-     int request, pid;
-     PTRACE_ARG3_TYPE addr;
-     int data;
-{
-  return ptrace (request, pid, addr, data, 0);
-}
-
-#ifdef DEBUG_PTRACE
-/* For the rest of the file, use an extra level of indirection */
-/* This lets us breakpoint usefully on call_ptrace. */
-#define ptrace call_ptrace
-#endif
-
-void
-kill_inferior ()
-{
-  if (inferior_pid == 0)
-    return;
-  ptrace (PT_EXIT, inferior_pid, (PTRACE_ARG3_TYPE) 0, 0, 0); /* PT_EXIT = PT_KILL ? */
-  wait ((int *)0);
-  target_mourn_inferior ();
-}
-
-/* Resume execution of the inferior process.
-   If STEP is nonzero, single-step it.
-   If SIGNAL is nonzero, give it that signal.  */
-
-void
-child_resume (step, signal)
-     int step;
-     int signal;
-{
-  errno = 0;
-
-  /* An address of (PTRACE_ARG3_TYPE) 1 tells ptrace to continue from where
-     it was. (If GDB wanted it to start some other way, we have already
-     written a new PC value to the child.)  */
-
-  if (step)
-    ptrace (PT_SINGLE, inferior_pid, (PTRACE_ARG3_TYPE) 1, signal, 0);
-  else
-    ptrace (PT_CONTIN, inferior_pid, (PTRACE_ARG3_TYPE) 1, signal, 0);
-
-  if (errno)
-    perror_with_name ("ptrace");
-}
-\f
-#ifdef ATTACH_DETACH
-/* Nonzero if we are debugging an attached process rather than
-   an inferior.  */
-extern int attach_flag;
-
-/* Start debugging the process whose number is PID.  */
-int
-attach (pid)
-     int pid;
-{
-  errno = 0;
-  ptrace (PT_ATTACH, pid, (PTRACE_ARG3_TYPE) 0, 0, 0);
-  if (errno)
-    perror_with_name ("ptrace");
-  attach_flag = 1;
-  return pid;
-}
-
-/* Stop debugging the process whose number is PID
-   and continue it with signal number SIGNAL.
-   SIGNAL = 0 means just continue it.  */
-
-void
-detach (signal)
-     int signal;
-{
-  errno = 0;
-  ptrace (PT_DETACH, inferior_pid, (PTRACE_ARG3_TYPE) 1, signal, 0);
-  if (errno)
-    perror_with_name ("ptrace");
-  attach_flag = 0;
-}
-#endif /* ATTACH_DETACH */
-\f
-#if !defined (FETCH_INFERIOR_REGISTERS)
-
-/* KERNEL_U_ADDR is the amount to subtract from u.u_ar0
-   to get the offset in the core file of the register values.  */
-#if defined (KERNEL_U_ADDR_BSD)
-/* Get kernel_u_addr using BSD-style nlist().  */
-CORE_ADDR kernel_u_addr;
-
-#include <a.out.gnu.h>         /* For struct nlist */
-
-void
-_initialize_kernel_u_addr ()
-{
-  struct nlist names[2];
-
-  names[0].n_un.n_name = "_u";
-  names[1].n_un.n_name = NULL;
-  if (nlist ("/vmunix", names) == 0)
-    kernel_u_addr = names[0].n_value;
-  else
-    fatal ("Unable to get kernel u area address.");
-}
-#endif /* KERNEL_U_ADDR_BSD.  */
-
-#if defined (KERNEL_U_ADDR_HPUX)
-/* Get kernel_u_addr using HPUX-style nlist().  */
-CORE_ADDR kernel_u_addr;
-
-struct hpnlist {      
-        char *          n_name;
-        long            n_value;  
-        unsigned char   n_type;   
-        unsigned char   n_length;  
-        short           n_almod;   
-        short           n_unused;
-};
-static struct hpnlist nl[] = {{ "_u", -1, }, { (char *) 0, }};
-
-/* read the value of the u area from the hp-ux kernel */
-void _initialize_kernel_u_addr ()
-{
-    struct user u;
-    nlist ("/hp-ux", &nl);
-    kernel_u_addr = nl[0].n_value;
-}
-#endif /* KERNEL_U_ADDR_HPUX.  */
-
-#if !defined (offsetof)
-#define offsetof(TYPE, MEMBER) ((unsigned long) &((TYPE *)0)->MEMBER)
-#endif
-
-/* U_REGS_OFFSET is the offset of the registers within the u area.  */
-#if !defined (U_REGS_OFFSET)
-#define U_REGS_OFFSET \
-  ptrace (PT_READ_U, inferior_pid, \
-          (PTRACE_ARG3_TYPE) (offsetof (struct user, u_ar0)), 0, 0) \
-    - KERNEL_U_ADDR
-#endif
-
-/* Registers we shouldn't try to fetch.  */
-#if !defined (CANNOT_FETCH_REGISTER)
-#define CANNOT_FETCH_REGISTER(regno) 0
-#endif
-
-/* Fetch one register.  */
-
-static void
-fetch_register (regno)
-     int regno;
-{
-  register unsigned int regaddr;
-  char buf[MAX_REGISTER_RAW_SIZE];
-  char mess[128];                              /* For messages */
-  register int i;
-
-  /* Offset of registers within the u area.  */
-  unsigned int offset;
-
-  if (CANNOT_FETCH_REGISTER (regno))
-    {
-      bzero (buf, REGISTER_RAW_SIZE (regno));  /* Supply zeroes */
-      supply_register (regno, buf);
-      return;
-    }
-
-  offset = U_REGS_OFFSET;
-
-  regaddr = register_addr (regno, offset);
-  for (i = 0; i < REGISTER_RAW_SIZE (regno); i += sizeof (int))
-    {
-      errno = 0;
-      *(int *) &buf[i] = ptrace (PT_RUREGS, inferior_pid,
-                                (PTRACE_ARG3_TYPE) regaddr, 0, 0);
-      regaddr += sizeof (int);
-      if (errno != 0)
-       {
-         sprintf (mess, "reading register %s (#%d)", reg_names[regno], regno);
-         perror_with_name (mess);
-       }
-    }
-  supply_register (regno, buf);
-}
-
-
-/* Fetch all registers, or just one, from the child process.  */
-
-void
-fetch_inferior_registers (regno)
-     int regno;
-{
-  if (regno == -1)
-    for (regno = 0; regno < NUM_REGS; regno++)
-      fetch_register (regno);
-  else
-    fetch_register (regno);
-}
-
-/* Registers we shouldn't try to store.  */
-#if !defined (CANNOT_STORE_REGISTER)
-#define CANNOT_STORE_REGISTER(regno) 0
-#endif
-
-/* Store our register values back into the inferior.
-   If REGNO is -1, do this for all registers.
-   Otherwise, REGNO specifies which register (so we can save time).  */
-
-void
-store_inferior_registers (regno)
-     int regno;
-{
-  register unsigned int regaddr;
-  char buf[80];
-  extern char registers[];
-  register int i;
-
-  unsigned int offset = U_REGS_OFFSET;
-
-  if (regno >= 0)
-    {
-      regaddr = register_addr (regno, offset);
-      for (i = 0; i < REGISTER_RAW_SIZE (regno); i += sizeof(int))
-       {
-         errno = 0;
-         ptrace (PT_WUAREA, inferior_pid, (PTRACE_ARG3_TYPE) regaddr,
-                 *(int *) &registers[REGISTER_BYTE (regno) + i], 0);
-         if (errno != 0)
-           {
-             sprintf (buf, "writing register number %d(%d)", regno, i);
-             perror_with_name (buf);
-           }
-         regaddr += sizeof(int);
-       }
-    }
-  else
-    {
-      for (regno = 0; regno < NUM_REGS; regno++)
-       {
-         if (CANNOT_STORE_REGISTER (regno))
-           continue;
-         regaddr = register_addr (regno, offset);
-         for (i = 0; i < REGISTER_RAW_SIZE (regno); i += sizeof(int))
-           {
-             errno = 0;
-             ptrace (PT_WUAREA, inferior_pid, (PTRACE_ARG3_TYPE) regaddr,
-                     *(int *) &registers[REGISTER_BYTE (regno) + i], 0);
-             if (errno != 0)
-               {
-                 sprintf (buf, "writing register number %d(%d)", regno, i);
-                 perror_with_name (buf);
-               }
-             regaddr += sizeof(int);
-           }
-       }
-    }
-  return;
-}
-#endif /* !defined (FETCH_INFERIOR_REGISTERS).  */
-\f
-/* NOTE! I tried using PTRACE_READDATA, etc., to read and write memory
-   in the NEW_SUN_PTRACE case.
-   It ought to be straightforward.  But it appears that writing did
-   not write the data that I specified.  I cannot understand where
-   it got the data that it actually did write.  */
-
-/* Copy LEN bytes to or from inferior's memory starting at MEMADDR
-   to debugger memory starting at MYADDR.   Copy to inferior if
-   WRITE is nonzero.
-  
-   Returns the length copied, which is either the LEN argument or zero.
-   This xfer function does not do partial moves, since child_ops
-   doesn't allow memory operations to cross below us in the target stack
-   anyway.  */
-
-int
-child_xfer_memory (memaddr, myaddr, len, write, target)
-     CORE_ADDR memaddr;
-     char *myaddr;
-     int len;
-     int write;
-     struct target_ops *target;                /* ignored */
-{
-  register int i;
-  /* Round starting address down to longword boundary.  */
-  register CORE_ADDR addr = memaddr & - sizeof (int);
-  /* Round ending address up; get number of longwords that makes.  */
-  register int count
-    = (((memaddr + len) - addr) + sizeof (int) - 1) / sizeof (int);
-  /* Allocate buffer of that many longwords.  */
-  register int *buffer = (int *) alloca (count * sizeof (int));
-
-  if (write)
-    {
-      /* Fill start and end extra bytes of buffer with existing memory data.  */
-
-      if (addr != memaddr || len < (int)sizeof (int)) {
-       /* Need part of initial word -- fetch it.  */
-        buffer[0] = ptrace (PT_RIUSER, inferior_pid,
-                           (PTRACE_ARG3_TYPE) addr, 0, 0);
-      }
-
-      if (count > 1)           /* FIXME, avoid if even boundary */
-       {
-         buffer[count - 1]
-           = ptrace (PT_RIUSER, inferior_pid,
-                     (PTRACE_ARG3_TYPE) (addr + (count - 1) * sizeof (int)),
-                     0, 0);
-       }
-
-      /* Copy data to be written over corresponding part of buffer */
-
-      bcopy (myaddr, (char *) buffer + (memaddr & (sizeof (int) - 1)), len);
-
-      /* Write the entire buffer.  */
-
-      for (i = 0; i < count; i++, addr += sizeof (int))
-       {
-#if 0
-/* The HP-UX kernel crashes if you use PT_WDUSER to write into the text
-   segment.  FIXME -- does it work to write into the data segment using
-   WIUSER, or do these idiots really expect us to figure out which segment
-   the address is in, so we can use a separate system call for it??!  */
-         errno = 0;
-         ptrace (PT_WDUSER, inferior_pid, (PTRACE_ARG3_TYPE) addr,
-                 buffer[i], 0);
-         if (errno)
-#endif
-           {
-             /* Using the appropriate one (I or D) is necessary for
-                Gould NP1, at least.  */
-             errno = 0;
-             ptrace (PT_WIUSER, inferior_pid, (PTRACE_ARG3_TYPE) addr,
-                     buffer[i], 0);
-           }
-         if (errno)
-           return 0;
-       }
-    }
-  else
-    {
-      /* Read all the longwords */
-      for (i = 0; i < count; i++, addr += sizeof (int))
-       {
-         errno = 0;
-         buffer[i] = ptrace (PT_RIUSER, inferior_pid,
-                             (PTRACE_ARG3_TYPE) addr, 0, 0);
-         if (errno)
-           return 0;
-         QUIT;
-       }
-
-      /* Copy appropriate bytes out of the buffer.  */
-      bcopy ((char *) buffer + (memaddr & (sizeof (int) - 1)), myaddr, len);
-    }
-  return len;
-}
-
-
-
-
-int
-getpagesize()
-{
-  return(4096);
-}
index 27bf9e9..e69de29 100644 (file)
-/* Machine-dependent code which would otherwise be in inflow.c and core.c,
-   for GDB, the GNU debugger.  This code is for the HP PA-RISC cpu.
-   Copyright 1986, 1987, 1989, 1990, 1991, 1992 Free Software Foundation, Inc.
-
-   Contributed by the Center for Software Science at the
-   University of Utah (pa-gdb-bugs@cs.utah.edu).
-
-This file is part of GDB.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-#include "defs.h"
-#include "frame.h"
-#include "inferior.h"
-#include "value.h"
-
-/* For argument passing to the inferior */
-#include "symtab.h"
-
-#ifdef USG
-#include <sys/types.h>
-#endif
-
-#include <sys/param.h>
-#include <sys/dir.h>
-#include <signal.h>
-#include <sys/ioctl.h>
-
-#ifdef COFF_ENCAPSULATE
-#include "a.out.encap.h"
-#else
-#include <a.out.h>
-#endif
-#ifndef N_SET_MAGIC
-#define N_SET_MAGIC(exec, val) ((exec).a_magic = (val))
-#endif
-
-/*#include <sys/user.h>                After a.out.h  */
-#include <sys/file.h>
-#include <sys/stat.h>
-#include <sys/ptrace.h>
-#include <machine/psl.h>
-
-#ifdef KERNELDEBUG
-#include <sys/vmmac.h>
-#include <machine/machparam.h>
-#include <machine/vmparam.h>
-#include <machine/pde.h>
-#include <machine/cpu.h>
-#include <machine/iomod.h>
-#include <machine/pcb.h>
-#include <machine/rpb.h>
-#include <ctype.h>
-
-extern int kernel_debugging;
-extern CORE_ADDR startup_file_start;
-extern CORE_ADDR startup_file_end;
-
-#define        KERNOFF         ((unsigned)KERNBASE)
-#define        INKERNEL(x)     ((x) >= KERNOFF && (x) < KERNOFF + ctob(slr))
-
-static int ok_to_cache();
-static void set_kernel_boundaries();
-
-int devmem = 0;
-int vtophys_ready = 0;
-int kerneltype;
-#define        OS_BSD  1
-#define        OS_MACH 2
-#endif
-
-#include "gdbcore.h"
-#include "gdbcmd.h"
-
-extern int errno;
-\f
-
-
-
-
-
-/* Last modification time of executable file.
-   Also used in source.c to compare against mtime of a source file.  */
-
-extern int exec_mtime;
-
-/* Virtual addresses of bounds of the two areas of memory in the core file.  */
-
-/* extern CORE_ADDR data_start; */
-extern CORE_ADDR data_end;
-extern CORE_ADDR stack_start;
-extern CORE_ADDR stack_end;
-
-/* Virtual addresses of bounds of two areas of memory in the exec file.
-   Note that the data area in the exec file is used only when there is no core file.  */
-
-extern CORE_ADDR text_start;
-extern CORE_ADDR text_end;
-
-extern CORE_ADDR exec_data_start;
-extern CORE_ADDR exec_data_end;
-
-/* Address in executable file of start of text area data.  */
-
-extern int text_offset;
-
-/* Address in executable file of start of data area data.  */
-
-extern int exec_data_offset;
-
-/* Address in core file of start of data area data.  */
-
-extern int data_offset;
-
-/* Address in core file of start of stack area data.  */
-
-extern int stack_offset;
-
-struct header file_hdr;
-struct som_exec_auxhdr exec_hdr;
-\f
-#ifdef KERNELDEBUG
-/*
- * Kernel debugging routines.
- */
-
-static struct pcb pcb;
-static struct pde *pdir;
-static struct hte *htbl;
-static u_int npdir, nhtbl;
-
-static CORE_ADDR
-ksym_lookup(name)
-       char *name;
-{
-       struct symbol *sym;
-       int i;
-
-       if ((i = lookup_misc_func(name)) < 0)
-               error("kernel symbol `%s' not found.", name);
-
-       return (misc_function_vector[i].address);
-}
-
-/*
- * (re-)set the variables that tell "inside_entry_file" where to end
- * a stack backtrace.
- */
-void
-set_kernel_boundaries()
-{
-       switch (kerneltype) {
-       case OS_MACH:
-               startup_file_start = ksym_lookup("$syscall");
-               startup_file_end = ksym_lookup("trap");
-               break;
-       case OS_BSD:
-               startup_file_start = ksym_lookup("syscallinit");
-               startup_file_end = ksym_lookup("$syscallexit");
-               break;
-       }
-}
-
-/*
- * return true if 'len' bytes starting at 'addr' can be read out as
- * longwords and/or locally cached (this is mostly for memory mapped
- * i/o register access when debugging remote kernels).
- */
-static int
-ok_to_cache(addr, len)
-{
-       static CORE_ADDR ioptr;
-
-       if (! ioptr)
-               ioptr = ksym_lookup("ioptr");
-
-       if (addr >= ioptr && addr < SPA_HIGH)
-               return (0);
-
-       return (1);
-}
-
-static
-physrd(addr, dat, len)
-       u_int addr;
-       char *dat;
-{
-       if (lseek(corechan, addr, L_SET) == -1)
-               return (-1);
-       if (read(corechan, dat, len) != len)
-               return (-1);
-
-       return (0);
-}
-
-/*
- * When looking at kernel data space through /dev/mem or with a core file, do
- * virtual memory mapping.
- */
-static CORE_ADDR
-vtophys(space, addr)
-       unsigned space;
-       CORE_ADDR addr;
-{
-       struct pde *pptr;
-       u_int hindx, vpageno, ppageno;
-       CORE_ADDR phys = ~0;
-
-       if (!vtophys_ready) {
-               phys = addr;            /* XXX for kvread */
-       } else if (kerneltype == OS_BSD) {
-               /* make offset into a virtual page no */
-               vpageno = btop(addr);
-               /*
-                *  Determine index into hash table, initialize pptr to this
-                *  entry (since first word of pte & hte are same), and set
-                *  physical page number for first entry in chain.
-                */
-               hindx = pdirhash(space, addr) & (nhtbl-1);
-               pptr = (struct pde *) &htbl[hindx];
-               ppageno = pptr->pde_next;
-               while (1) {
-                       if (pptr->pde_end)
-                               break;
-                       pptr = &pdir[ppageno];
-                       /*
-                        *  If space id & virtual page number match, return
-                        *  "next PDIR entry of previous PDIR entry" as the
-                        *  physical page or'd with offset into page.
-                        */
-                       if (pptr->pde_space == space &&
-                           pptr->pde_page == vpageno) {
-                               phys = (CORE_ADDR) ((u_int)ptob(ppageno) |
-                                                   (addr & PGOFSET));
-                               break;
-                       }
-                       ppageno = pptr->pde_next;
-               }
-       }
-#ifdef MACHKERNELDEBUG
-       else if (kerneltype == OS_MACH) {
-         mach_vtophys(space, addr, &phys);
-       }
-#endif
-#if 0
-       printf("vtophys(%x.%x) -> %x\n", space, addr, phys);
-#endif
-       return (phys);
-}
-
-static
-kvread(addr)
-       CORE_ADDR addr;
-{
-       CORE_ADDR paddr;
-
-       paddr = vtophys(0, addr);
-       if (paddr != ~0)
-               if (physrd(paddr, (char *)&addr, sizeof(addr)) == 0)
-                       return (addr);
-
-       return (~0);
-}
-
-static void
-read_pcb(addr)
-     u_int addr;
-{
-       int i, off;
-       extern char registers[];
-       static int reg2pcb[] = {
-               /* RPB */
-               -1,  3,  4,  5,  6,  7,  8,  9, 10, 11, 12, 13, 14, 15, 16, 17,
-               18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33,
-               45, 52, 51, 75, 74, 49, 53, 54, 55, 56, -1, 70, 66, 67, 68, 69,
-               71, 72, 73, 34, 42, 43, 44, 46, 47, 58, 59, 60, -1, -1, -1, -1,
-               -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
-               -1, -1, -1, -1,
-               /* BSD */
-               -1,  0,  1,  2,  3,  4,  5,  6,  7,  8,  9, 10, 11, 12, 13, 14,
-               15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30,
-               43, 64, 67, 68, 67, 47, 51, 52, 53, 54, -1, 35, 31, 32, 33, 34,
-               36, 37, 38, 39, 40, 41, 42, 44, 45, 56, 57, 58,102,103,104, -1,
-               70, 71, 72, 73, 74, 75, 76, 77, 78, 80, 82, 84, 86, 88, 90, 92,
-               94, 96, 98, 100,
-               /* Mach */
-               -1, -1,  0,  1,  2,  3,  4,  5,  6,  7,  8,  9, 10, 11, 12, 13,
-               14, 15, 16, -1, -1, -1, -1, -1, -1, -1, -1, 17, -1, -1, 18, -1,
-               25, -1, -1, -1, -1, 30, -1, -1, -1, -1, -1, 20, -1, -1, -1, 19,
-               21, 22, 23, 24, 26, 27, -1, 28, 29, -1, -1, -1, -1, -1, -1, -1,
-               34, 35, 36, 37, 38, 39, 40, 41, -1, -1, -1, -1, -1, -1, -1, -1,
-               42, 44, 46, 48
-       };
-       static struct rpb *rpbaddr = (struct rpb *) 0;
-       static u_int rpbpcbaddr = 0;
-
-       if (!remote_debugging) {
-               /*
-                * If we are debugging a post-mortem and this is the first
-                * call of read_pcb, read the RPB.  Also assoicate the
-                * thread/proc running at the time with the RPB.
-                */
-               if (!devmem && rpbpcbaddr == 0) {
-                       CORE_ADDR raddr = ksym_lookup("rpb");
-                       int usepcb = 1;
-
-                       if (raddr != ~0) {
-                               rpbaddr = (struct rpb *) malloc(sizeof *rpbaddr);
-                               if (!physrd(raddr, (char *)rpbaddr, sizeof *rpbaddr)) {
-                                       rpbpcbaddr = addr;
-                                       usepcb = 0;
-                               }
-                       }
-                       if (usepcb) {
-                               error("cannot read rpb, using pcb for registers\n");
-                               if (rpbaddr)
-                                       free((char *)rpbaddr);
-                               rpbpcbaddr = ~0;
-                       }
-               }
-               if (physrd (addr, (char *)&pcb, sizeof pcb))
-                       error ("cannot read pcb at %x.\n", addr);
-       } else {
-               if (remote_read_inferior_memory(addr, (char *)&pcb, sizeof pcb))
-                       error ("cannot read pcb at %x.\n", addr);
-       }
-
-       if (kerneltype == OS_BSD) {
-               printf("p0br %lx p0lr %lx p1br %lx p1lr %lx\n",
-                      pcb.pcb_p0br, pcb.pcb_p0lr, pcb.pcb_p1br, pcb.pcb_p1lr);
-               off = NUM_REGS;
-       } else {
-               printf("pcb %lx psw %lx ksp %lx\n",
-                      addr, ((int *)&pcb)[31], ((int *)&pcb)[32]);
-               off = NUM_REGS * 2;
-       }
-       /*
-        * get the register values out of the sys pcb and
-        * store them where `read_register' will find them.
-        */
-       bzero(registers, REGISTER_BYTES);
-       for (i = 0; i < NUM_REGS; ++i)
-               if (reg2pcb[i+off] != -1)
-                       supply_register(i, &((int *)&pcb)[reg2pcb[i+off]]);
-       /*
-        * If the RPB is valid for this thread/proc use the register values
-        * contained there.
-        */
-       if (addr == rpbpcbaddr) {
-               off = 0;
-               for (i = 0; i < NUM_REGS; ++i)
-                       if (reg2pcb[i+off] != -1)
-                               supply_register(i, &((int *)rpbaddr)[reg2pcb[i+off]]);
-       }
-}
-
-void
-setup_kernel_debugging()
-{
-       struct stat stb;
-       CORE_ADDR addr;
-
-       fstat(corechan, &stb);
-       devmem = 0;
-       if ((stb.st_mode & S_IFMT) == S_IFCHR && stb.st_rdev == makedev(2, 0))
-               devmem = 1;
-
-       /* XXX */
-       if (lookup_misc_func("Sysmap") < 0)
-               kerneltype = OS_MACH;
-       else
-               kerneltype = OS_BSD;
-
-       if (kerneltype == OS_BSD) {
-               int len, err = 0;
-
-               /*
-                * Hash table and PDIR are equivalently mapped
-                */
-               nhtbl = kvread(ksym_lookup("nhtbl"));
-               if (nhtbl != ~0) {
-                       len = nhtbl * sizeof(*htbl);
-                       htbl = (struct hte *) malloc(len);
-                       if (htbl) {
-                               addr = kvread(ksym_lookup("htbl"));
-                               if (physrd(addr, (char *)htbl, len))
-                                       err++;
-                       } else
-                               err++;
-               } else
-                       err++;
-               npdir = kvread(ksym_lookup("npdir"));
-               if (npdir != ~0) {
-                       len = npdir * sizeof(*pdir);
-                       pdir = (struct pde *) malloc(len);
-                       if (pdir) {
-                               addr = kvread(ksym_lookup("pdir"));
-                               if (physrd(addr, (char *)pdir, len))
-                                       err++;
-                       } else
-                               err++;
-               } else
-                       err++;
-               if (err) {
-                       error("cannot read PDIR/HTBL");
-                       return;
-               }
-               vtophys_ready = 1;
-
-               /*
-                * pcb where "panic" saved registers in first thing in
-                * current u-area.  The current u-area is pointed to by
-                * "uptr".
-                */
-               addr = kvread(ksym_lookup("uptr"));
-               if (addr == ~0) {
-                       error("cannot read current u-area address");
-                       return;
-               }
-               read_pcb(vtophys(0, addr));     /* XXX space */
-               if (!devmem) {
-                       /* find stack frame */
-                       CORE_ADDR panicstr;
-                       char buf[256];
-                       register char *cp;
-                       
-                       panicstr = kvread(ksym_lookup("panicstr"));
-                       if (panicstr == ~0)
-                               return;
-                       kernel_core_file_hook(panicstr, buf, sizeof(buf));
-                       for (cp = buf; cp < &buf[sizeof(buf)] && *cp; cp++)
-                               if (!isascii(*cp) || (!isprint(*cp) && !isspace(*cp)))
-                                       *cp = '?';
-                       if (*cp)
-                               *cp = '\0';
-                       printf("panic: %s\n", buf);
-               }
-       }
-#ifdef MACHKERNELDEBUG
-       else {
-               int *thread;
-
-               /*
-                * Set up address translation
-                */
-               if (mach_vtophys_init() == 0) {
-                       error("cannot initialize vtophys for Mach");
-                       return;
-               }
-               vtophys_ready = 1;
-
-               /*
-                * Locate active thread and read PCB
-                * XXX MAJOR HACK
-                *      - assumes uni-processor
-                *      - assumes position of pcb to avoid mach includes
-                */
-               thread = (int *)kvread(ksym_lookup("active_threads"));
-               addr = kvread(&thread[9]);              /* XXX: pcb addr */
-               read_pcb(vtophys(0, addr));
-       }
-#endif
-}
-
-vtop_command(arg)
-       char *arg;
-{
-       u_int sp, off, pa;
-
-       if (!arg)
-               error_no_arg("kernel virtual address");
-       if (!kernel_debugging)
-               error("not debugging kernel");
-
-       sp = 0;         /* XXX */
-       off = (u_int) parse_and_eval_address(arg);
-       pa = vtophys(sp, off);
-       printf("%lx.%lx -> ", sp, off);
-       if (pa == ~0)
-               printf("<invalid>\n");
-       else
-               printf("%lx\n", pa);
-}
-
-set_paddr_command(arg)
-       char *arg;
-{
-       u_int addr;
-
-       if (!arg) {
-               if (kerneltype == OS_BSD)
-                       error_no_arg("ps-style address for new process");
-               else
-                       error_no_arg("thread structure virtual address");
-       }
-       if (!kernel_debugging)
-               error("not debugging kernel");
-
-       addr = (u_int) parse_and_eval_address(arg);
-       if (kerneltype == OS_BSD)
-               addr = ctob(addr);
-       else {
-               addr = kvread(&(((int *)addr)[9]));     /* XXX: pcb addr */
-               addr = vtophys(0, addr);                /* XXX space */
-       }
-       read_pcb(addr);
-
-       flush_cached_frames();
-       set_current_frame(create_new_frame(read_register(FP_REGNUM), read_pc()));
-       select_frame(get_current_frame(), 0);
-}
-
-/*
- * read len bytes from kernel virtual address 'addr' into local 
- * buffer 'buf'.  Return 0 if read ok, 1 otherwise.  On read
- * errors, portion of buffer not read is zeroed.
- */
-kernel_core_file_hook(addr, buf, len)
-       CORE_ADDR addr;
-       char *buf;
-       int len;
-{
-       int i;
-       CORE_ADDR paddr;
-
-       while (len > 0) {
-               paddr = vtophys(0, addr);       /* XXX space */
-               if (paddr == ~0) {
-                       bzero(buf, len);
-                       return (1);
-               }
-               /* we can't read across a page boundary */
-               i = min(len, NBPG - (addr & PGOFSET));
-               if (physrd(paddr, buf, i)) {
-                       bzero(buf, len);
-                       return (1);
-               }
-               buf += i;
-               addr += i;
-               len -= i;
-       }
-       return (0);
-}
-#endif
-
-
-\f
-
-
-
-/* Routines to extract various sized constants out of hppa 
-   instructions. */
-
-/* This assumes that no garbage lies outside of the lower bits of 
-   value. */
-
-int
-sign_extend (val, bits)
-     unsigned val, bits;
-{
-  return (int)(val >> bits - 1 ? (-1 << bits) | val : val);
-}
-
-/* For many immediate values the sign bit is the low bit! */
-
-int
-low_sign_extend (val, bits)
-     unsigned val, bits;
-{
-  return (int)((val & 0x1 ? (-1 << (bits - 1)) : 0) | val >> 1);
-}
-/* extract the immediate field from a ld{bhw}s instruction */
-
-
-
-unsigned
-get_field (val, from, to)
-     unsigned val, from, to;
-{
-  val = val >> 31 - to;
-  return val & ((1 << 32 - from) - 1);
-}
-
-unsigned
-set_field (val, from, to, new_val)
-     unsigned *val, from, to;
-{
-  unsigned mask = ~((1 << (to - from + 1)) << (31 - from));
-  return *val = *val & mask | (new_val << (31 - from));
-}
-
-/* extract a 3-bit space register number from a be, ble, mtsp or mfsp */
-
-extract_3 (word)
-     unsigned word;
-{
-  return GET_FIELD (word, 18, 18) << 2 | GET_FIELD (word, 16, 17);
-}
-       
-extract_5_load (word)
-     unsigned word;
-{
-  return low_sign_extend (word >> 16 & MASK_5, 5);
-}
-
-/* extract the immediate field from a st{bhw}s instruction */
-
-int
-extract_5_store (word)
-     unsigned word;
-{
-  return low_sign_extend (word & MASK_5, 5);
-}
-
-/* extract an 11 bit immediate field */
-
-int
-extract_11 (word)
-     unsigned word;
-{
-  return low_sign_extend (word & MASK_11, 11);
-}
-
-/* extract a 14 bit immediate field */
-
-int
-extract_14 (word)
-     unsigned word;
-{
-  return low_sign_extend (word & MASK_14, 14);
-}
-
-/* deposit a 14 bit constant in a word */
-
-unsigned
-deposit_14 (opnd, word)
-     int opnd;
-     unsigned word;
-{
-  unsigned sign = (opnd < 0 ? 1 : 0);
-
-  return word | ((unsigned)opnd << 1 & MASK_14)  | sign;
-}
-
-/* extract a 21 bit constant */
-
-int
-extract_21 (word)
-     unsigned word;
-{
-  int val;
-
-  word &= MASK_21;
-  word <<= 11;
-  val = GET_FIELD (word, 20, 20);
-  val <<= 11;
-  val |= GET_FIELD (word, 9, 19);
-  val <<= 2;
-  val |= GET_FIELD (word, 5, 6);
-  val <<= 5;
-  val |= GET_FIELD (word, 0, 4);
-  val <<= 2;
-  val |= GET_FIELD (word, 7, 8);
-  return sign_extend (val, 21) << 11;
-}
-
-/* deposit a 21 bit constant in a word. Although 21 bit constants are
-   usually the top 21 bits of a 32 bit constant, we assume that only
-   the low 21 bits of opnd are relevant */
-
-unsigned
-deposit_21 (opnd, word)
-     unsigned opnd, word;
-{
-  unsigned val = 0;
-
-  val |= GET_FIELD (opnd, 11 + 14, 11 + 18);
-  val <<= 2;
-  val |= GET_FIELD (opnd, 11 + 12, 11 + 13);
-  val <<= 2;
-  val |= GET_FIELD (opnd, 11 + 19, 11 + 20);
-  val <<= 11;
-  val |= GET_FIELD (opnd, 11 + 1, 11 + 11);
-  val <<= 1;
-  val |= GET_FIELD (opnd, 11 + 0, 11 + 0);
-  return word | val;
-}
-
-/* extract a 12 bit constant from branch instructions */
-
-int
-extract_12 (word)
-     unsigned word;
-{
-  return sign_extend (GET_FIELD (word, 19, 28) |
-                     GET_FIELD (word, 29, 29) << 10 |
-                     (word & 0x1) << 11, 12) << 2;
-}
-
-/* extract a 17 bit constant from branch instructions, returning the
-   19 bit signed value. */
-
-int
-extract_17 (word)
-     unsigned word;
-{
-  return sign_extend (GET_FIELD (word, 19, 28) |
-                     GET_FIELD (word, 29, 29) << 10 |
-                     GET_FIELD (word, 11, 15) << 11 |
-                     (word & 0x1) << 16, 17) << 2;
-}
-
-
-CORE_ADDR
-frame_saved_pc (frame)
-     FRAME frame;
-{
-  if (get_current_frame () == frame)
-    {
-      struct frame_saved_regs saved_regs;
-      CORE_ADDR pc = get_frame_pc (frame);
-
-      get_frame_saved_regs (frame, &saved_regs);
-      if (pc >= millicode_start && pc < millicode_end)
-       return read_register (31);
-      else if (saved_regs.regs[RP_REGNUM])
-       return read_memory_integer (saved_regs.regs[RP_REGNUM], 4);
-      else
-       return read_register (RP_REGNUM);
-    }
-  return read_memory_integer (frame->frame - 20, 4) & ~0x3;
-}
-
-
-/* To see if a frame chain is valid, see if the caller looks like it
-   was compiled with gcc. */
-
-int frame_chain_valid (chain, thisframe)
-     FRAME_ADDR chain;
-     FRAME thisframe;
-{
-  if (chain && (chain > 0x60000000 
-               /* || remote_debugging   -this is no longer used */
-#ifdef KERNELDEBUG
-               || kernel_debugging
-#endif
-               ))
-    {
-      CORE_ADDR pc = get_pc_function_start (FRAME_SAVED_PC (thisframe));
-
-      if (!inside_entry_file (pc))
-       return 0;
-      /* look for stw rp, -20(0,sp); copy 4,1; copy sp, 4 */
-      if (read_memory_integer (pc, 4) == 0x6BC23FD9)                   
-       pc = pc + 4;                                                    
-      
-      if (read_memory_integer (pc, 4) == 0x8040241 &&
-         read_memory_integer (pc + 4, 4) == 0x81E0244)                 
-       return 1;
-      else
-       return 0;
-    }
-  else
-    return 0;
-}
-
-/* Some helper functions. gcc_p returns 1 if the function beginning at 
-   pc appears to have been compiled with gcc. hpux_cc_p returns 1 if
-   fn was compiled with hpux cc. gcc functions look like :
-
-   stw     rp,-0x14(sp) ; optional
-   or      r4,r0,r1
-   or      sp,r0,r4
-   stwm    r1,framesize(sp)
-
-   hpux cc functions look like:
-
-   stw     rp,-0x14(sp) ; optional.
-   stwm    r3,framesiz(sp)
-   */
-
-gcc_p (pc)
-     CORE_ADDR pc;
-{
-  if (read_memory_integer (pc, 4) == 0x6BC23FD9)                       
-    pc = pc + 4;                                                       
-      
-  if (read_memory_integer (pc, 4) == 0x8040241 &&
-      read_memory_integer (pc + 4, 4) == 0x81E0244)                    
-    return 1;
-  return 0;
-}
-
-  
-find_dummy_frame_regs (frame, frame_saved_regs)
-     struct frame_info *frame;
-     struct frame_saved_regs *frame_saved_regs;
-{
-  CORE_ADDR fp = frame->frame;
-  int i;
-  
-  frame_saved_regs->regs[RP_REGNUM] = fp - 20 & ~0x3;
-  frame_saved_regs->regs[FP_REGNUM] = fp;
-  frame_saved_regs->regs[1] = fp + 8;
-  frame_saved_regs->regs[3] = fp + 12;
-  for (fp += 16, i = 3; i < 30; fp += 4, i++)
-    frame_saved_regs->regs[i] = fp;
-  frame_saved_regs->regs[31] = fp;
-  fp += 4;
-  for (i = FP0_REGNUM; i < NUM_REGS; i++, fp += 8)
-    frame_saved_regs->regs[i] = fp;
-  /* depend on last increment of fp */
-  frame_saved_regs->regs[IPSW_REGNUM] = fp - 4;
-  frame_saved_regs->regs[SAR_REGNUM] = fp;
-  fp += 4;
-  frame_saved_regs->regs[PCOQ_TAIL_REGNUM] = fp;
-  frame_saved_regs->regs[PCSQ_TAIL_REGNUM] = fp;
-}
-
-CORE_ADDR
-hp_push_arguments (nargs, args, sp, struct_return, struct_addr)
-     int nargs;
-     value *args;
-     CORE_ADDR sp;
-     int struct_return;
-     CORE_ADDR struct_addr;
-{
-  /* array of arguments' offsets */
-  int *offset = (int *)alloca(nargs);
-  int cum = 0;
-  int i, alignment;
-  
-  for (i = 0; i < nargs; i++)
-    {
-      cum += TYPE_LENGTH (VALUE_TYPE (args[i]));
-      /* value must go at proper alignment. Assume alignment is a
-        power of two.*/
-      alignment = hp_alignof (VALUE_TYPE (args[i]));
-      if (cum % alignment)
-       cum = (cum + alignment) & -alignment;
-      offset[i] = -cum;
-    }
-  for (i == 0; i < nargs; i++)
-    {
-      write_memory (sp + offset[i], VALUE_CONTENTS (args[i]), sizeof(int));
-    }
-  sp += min ((cum + 7) & -8, 48);
-  if (struct_return)
-    write_register (28, struct_addr);
-  return sp + 48;
-}
-
-/* return the alignment of a type in bytes. Structures have the maximum
-   alignment required by their fields. */
-
-int
-hp_alignof (arg)
-     struct type *arg;
-{
-  int max_align, align, i;
-  switch (TYPE_CODE (arg))
-    {
-    case TYPE_CODE_PTR:
-    case TYPE_CODE_INT:
-    case TYPE_CODE_FLT:
-      return TYPE_LENGTH (arg);
-    case TYPE_CODE_ARRAY:
-      return hp_alignof (TYPE_FIELD_TYPE (arg, 0));
-    case TYPE_CODE_STRUCT:
-    case TYPE_CODE_UNION:
-      max_align = 2;
-      for (i = 0; i < TYPE_NFIELDS (arg); i++)
-       {
-         /* Bit fields have no real alignment. */
-         if (!TYPE_FIELD_BITPOS (arg, i))
-           {
-             align = hp_alignof (TYPE_FIELD_TYPE (arg, i));
-             max_align = max (max_align, align);
-           }
-       }
-      return max_align;
-    default:
-      return 4;
-    }
-}
-
-/* Print the register regnum, or all registers if regnum is -1 */
-
-pa_do_registers_info (regnum, fpregs)
-     int regnum;
-     int fpregs;
-{
-  char raw_regs [REGISTER_BYTES];
-  int i;
-  
-  for (i = 0; i < NUM_REGS; i++)
-    read_relative_register_raw_bytes (i, raw_regs + REGISTER_BYTE (i));
-  if (regnum = -1)
-    pa_print_registers (raw_regs, regnum);
-  else if (regnum < FP0_REGNUM)
-    {
-      printf ("%s %x\n", reg_names[regnum], *(long *)(raw_regs +
-                                                     REGISTER_BYTE (regnum)));
-    }
-  else
-    pa_print_fp_reg (regnum);
-}
-
-pa_print_registers (raw_regs, regnum)
-     char *raw_regs;
-     int regnum;
-{
-  int i;
-
-  for (i = 0; i < 18; i++)
-    printf ("%8.8s: %8x  %8.8s: %8x  %8.8s: %8x  %8.8s: %8x\n",
-                    reg_names[i],
-                    *(int *)(raw_regs + REGISTER_BYTE (i)),
-                    reg_names[i + 18],
-                    *(int *)(raw_regs + REGISTER_BYTE (i + 18)),
-                    reg_names[i + 36],
-                    *(int *)(raw_regs + REGISTER_BYTE (i + 36)),
-                    reg_names[i + 54],
-                    *(int *)(raw_regs + REGISTER_BYTE (i + 54)));
-  for (i = 72; i < NUM_REGS; i++)
-    pa_print_fp_reg (i);
-}
-
-pa_print_fp_reg (i)
-     int i;
-{
-  unsigned char raw_buffer[MAX_REGISTER_RAW_SIZE];
-  unsigned char virtual_buffer[MAX_REGISTER_VIRTUAL_SIZE];
-  REGISTER_TYPE val;
-
-  /* Get the data in raw format, then convert also to virtual format.  */
-  read_relative_register_raw_bytes (i, raw_buffer);
-  REGISTER_CONVERT_TO_VIRTUAL (i, raw_buffer, virtual_buffer);
-
-  fputs_filtered (reg_names[i], stdout);
-  print_spaces_filtered (15 - strlen (reg_names[i]), stdout);
-
-  val_print (REGISTER_VIRTUAL_TYPE (i), virtual_buffer, 0, stdout, 0,
-            1, 0, Val_pretty_default);
-  printf_filtered ("\n");
-
-}
-
-/*
- * Virtual to physical translation routines for Utah's Mach 3.0
- */
-#ifdef MACHKERNELDEBUG
-
-#define STATIC
-
-#if 0  /* too many includes to resolve, too much crap */
-#include <kern/queue.h>
-#include <vm/pmap.h>   
-#include <mach/vm_prot.h>
-#else
-/* queue.h */
-struct queue_entry {
-       struct queue_entry      *next;          /* next element */
-       struct queue_entry      *prev;          /* previous element */
-};
-
-typedef struct queue_entry     *queue_t;
-typedef        struct queue_entry      queue_head_t;
-typedef        struct queue_entry      queue_chain_t;
-typedef        struct queue_entry      *queue_entry_t;
-
-/* pmap.h */
-#define HP800_HASHSIZE         1024
-#define HP800_HASHSIZE_LOG2    10
-
-#define pmap_hash(space, offset) \
-       (((unsigned) (space) << 5 ^ \
-         ((unsigned) (offset) >> 19 | (unsigned) (space) << 13) ^ \
-         (unsigned) (offset) >> 11) & (HP800_HASHSIZE-1))
-
-struct mapping {
-       queue_head_t    hash_link;      /* hash table links */
-       queue_head_t    phys_link;      /* for mappings of a given PA */
-       space_t         space;          /* virtual space */
-       unsigned        offset;         /* virtual page number */
-       unsigned        tlbpage;        /* physical page (for TLB load) */
-       unsigned        tlbprot;        /* prot/access rights (for TLB load) */
-       struct pmap     *pmap;          /* pmap mapping belongs to */
-};
-
-struct phys_entry {
-       queue_head_t    phys_link;      /* head of mappings of a given PA */
-       struct mapping  *writer;        /* mapping with R/W access */
-       unsigned        tlbprot;        /* TLB format protection */
-};
-
-#endif
-
-#define atop(a)                ((unsigned)(a) >> 11)
-#define ptoa(p)                ((unsigned)(p) << 11)
-#define trunc_page(a)  ((unsigned)(a) & ~2047)
-
-STATIC long equiv_end;
-STATIC queue_head_t *Ovtop_table, *vtop_table, *Ofree_mapping, free_mapping;
-STATIC struct phys_entry *Ophys_table, *phys_table;
-STATIC long vm_last_phys, vm_first_phys;
-STATIC struct mapping *firstmap, *lastmap, *Omap_table, *map_table;
-STATIC unsigned Omlow, Omhigh, Omhead, Ovlow, Ovhigh, Oplow, Ophigh;
-STATIC unsigned mlow, mhigh, mhead, vlow, vhigh, plow, phigh;
-STATIC int vtopsize, physsize, mapsize;
-STATIC int kmemfd;
-
-#define IS_OVTOPPTR(p) ((unsigned)(p) >= Ovlow && (unsigned)(p) < Ovhigh)
-#define IS_OMAPPTR(p)  ((unsigned)(p) >= Omlow && (unsigned)(p) < Omhigh)
-#define IS_OPHYSPTR(p) ((unsigned)(p) >= Oplow && (unsigned)(p) < Ophigh)
-#define IS_VTOPPTR(p)  ((unsigned)(p) >= vlow && (unsigned)(p) < vhigh)
-#define IS_MAPPTR(p)   ((unsigned)(p) >= mlow && (unsigned)(p) < mhigh)
-#define IS_PHYSPTR(p)  ((unsigned)(p) >= plow && (unsigned)(p) < phigh)
-
-struct mapstate {
-       char    unused;
-       char    flags;
-       short   hashix;
-       short   physix;
-} *mapstate;
-
-/* flags */
-#define M_ISFREE       1
-#define M_ISHASH       2
-#define M_ISPHYS       4
-
-mach_vtophys_init()
-{
-       int errors = 0;
-
-       if (!readdata())
-               errors++;
-       if (!verifydata())
-               errors++;
-       if (!errors)
-               return(1);
-       fflush(stdout);
-       fprintf(stderr,
-               "translate: may not be able to translate all addresses\n");
-       return(0);
-}
-
-mach_vtophys(space, off, pa)
-       unsigned space, off, *pa;
-{
-       register int i;
-       register queue_t qp;
-       register struct mapping *mp;
-       int poff;
-
-       /*
-        * Kernel IO or equivilently mapped, one to one.
-        */
-       if (space == 0 && (long)off < equiv_end) {
-               *pa = off;
-               return(1);
-       }
-       /*
-        * Else look it up in specified space
-        */
-       poff = off - trunc_page(off);
-       off = trunc_page(off);
-       qp = &vtop_table[pmap_hash(space, off)];
-       for (mp = (struct mapping *)qp->next;
-            qp != (queue_entry_t)mp;
-            mp = (struct mapping *)mp->hash_link.next) {
-               if (mp->space == space && mp->offset == off) {
-                       *pa = (mp->tlbpage << 7) | poff;
-                       return(1);
-               }
-       }
-       return(0);
-}
-
-STATIC
-readdata()
-{
-       char *tmp, *mach_malloc();
-       long size;
-
-       /* easy scalars */
-       mach_read("equiv_end", ~0, (char *)&equiv_end, sizeof equiv_end);
-       mach_read("vm_first_phys", ~0,
-                 (char *)&vm_first_phys, sizeof vm_first_phys);
-       mach_read("vm_last_phys", ~0,
-                 (char *)&vm_last_phys, sizeof vm_last_phys);
-       mach_read("firstmap", ~0, (char *)&firstmap, sizeof firstmap);
-       mach_read("lastmap", ~0, (char *)&lastmap, sizeof lastmap);
-
-       /* virtual to physical hash table */
-       vtopsize = HP800_HASHSIZE;
-       size = vtopsize * sizeof(queue_head_t);
-       tmp = mach_malloc("vtop table", size);
-       mach_read("vtop_table", ~0, (char *)&Ovtop_table, sizeof Ovtop_table);
-       mach_read("vtop table", (CORE_ADDR)Ovtop_table, tmp, size);
-       vtop_table = (queue_head_t *) tmp;
-
-       /* inverted page table */
-       physsize = atop(vm_last_phys - vm_first_phys);
-       size = physsize * sizeof(struct phys_entry);
-       tmp = mach_malloc("phys table", size);
-       mach_read("phys_table", ~0, (char *)&Ophys_table, sizeof Ophys_table);
-       mach_read("phys table", (CORE_ADDR)Ophys_table, tmp, size);
-       phys_table = (struct phys_entry *) tmp;
-
-       /* mapping structures */
-       Ofree_mapping = (queue_head_t *) ksym_lookup("free_mapping");
-       mach_read("free mapping", (CORE_ADDR)Ofree_mapping,
-                 (char *) &free_mapping, sizeof free_mapping);
-       Omap_table = firstmap;
-       mapsize = lastmap - firstmap;
-       size = mapsize * sizeof(struct mapping);
-       tmp = mach_malloc("mapping table", size);
-       mach_read("mapping table", (CORE_ADDR)Omap_table, tmp, size);
-       map_table = (struct mapping *) tmp;
-
-       /* set limits */
-       Ovlow = (unsigned) Ovtop_table;
-       Ovhigh = (unsigned) &Ovtop_table[vtopsize];
-       Oplow = (unsigned) Ophys_table;
-       Ophigh = (unsigned) &Ophys_table[physsize];
-       Omhead = (unsigned) Ofree_mapping;
-       Omlow = (unsigned) firstmap;
-       Omhigh = (unsigned) lastmap;
-       mlow = (unsigned) map_table;
-       mhigh = (unsigned) &map_table[mapsize];
-       mhead = (unsigned) &free_mapping;
-       vlow = (unsigned) vtop_table;
-       vhigh = (unsigned) &vtop_table[vtopsize];
-       plow = (unsigned) phys_table;
-       phigh = (unsigned) &phys_table[physsize];
-
-#if 0
-       fprintf(stderr, "Ovtop [%#x-%#x) Ophys [%#x-%#x) Omap %#x [%#x-%#x)\n",
-               Ovlow, Ovhigh, Oplow, Ophigh, Omhead, Omlow, Omhigh);
-       fprintf(stderr, "vtop [%#x-%#x) phys [%#x-%#x) map %#x [%#x-%#x)\n",
-               vlow, vhigh, plow, phigh, mhead, mlow, mhigh);
-#endif
-       return(adjustdata());
-}
-
-STATIC unsigned
-ptrcvt(ptr)
-       unsigned ptr;
-{
-       unsigned ret;
-       char *str;
-
-       if (ptr == 0) {
-               ret = ptr;
-               str = "null";
-       } else if (IS_OVTOPPTR(ptr)) {
-               ret = vlow + (ptr - Ovlow);
-               str = "vtop";
-       } else if (IS_OPHYSPTR(ptr)) {
-               ret = plow + (ptr - Oplow);
-               str = "phys";
-       } else if (IS_OMAPPTR(ptr)) {
-               ret = mlow + (ptr - Omlow);
-               str = "map";
-       } else if (ptr == Omhead) {
-               ret = mhead;
-               str = "maphead";
-       } else {
-               error("bogus pointer %#x", ptr);
-               str = "wild";
-               ret = ptr;
-       }
-#if 0
-       fprintf(stderr, "%x (%s) -> %x\n", ptr, str, ret);
-#endif
-       return(ret);
-}
-
-STATIC int
-adjustdata()
-{
-       register int i, lim;
-       queue_head_t *nq;
-       struct phys_entry *np;
-       struct mapping *nm;
-
-       /* hash table */
-       lim = vtopsize;
-       for (nq = vtop_table; nq < &vtop_table[lim]; nq++) {
-               nq->next = (queue_entry_t) ptrcvt((unsigned)nq->next);
-               nq->prev = (queue_entry_t) ptrcvt((unsigned)nq->prev);
-       }
-
-       /* IPT */
-       lim = physsize;
-       for (np = phys_table; np < &phys_table[lim]; np++) {
-               np->phys_link.next = (queue_entry_t)
-                       ptrcvt((unsigned)np->phys_link.next);
-               np->phys_link.prev = (queue_entry_t)
-                       ptrcvt((unsigned)np->phys_link.prev);
-               np->writer = (struct mapping *) ptrcvt((unsigned)np->writer);
-       }
-
-       /* mapping table */
-       free_mapping.next = (queue_entry_t)ptrcvt((unsigned)free_mapping.next);
-       free_mapping.prev = (queue_entry_t)ptrcvt((unsigned)free_mapping.prev);
-       lim = mapsize;
-       for (nm = map_table; nm < &map_table[lim]; nm++) {
-               nm->hash_link.next = (queue_entry_t)
-                       ptrcvt((unsigned)nm->hash_link.next);
-               nm->hash_link.prev = (queue_entry_t)
-                       ptrcvt((unsigned)nm->hash_link.prev);
-               nm->phys_link.next = (queue_entry_t)
-                       ptrcvt((unsigned)nm->phys_link.next);
-               nm->phys_link.prev = (queue_entry_t)
-                       ptrcvt((unsigned)nm->phys_link.prev);
-       }
-       return(1);
-}
-
-/*
- * Consistency checks, make sure:
- *
- *     1. all mappings are accounted for
- *     2. no cycles
- *     3. no wild pointers
- *     4. consisent TLB state
- */
-STATIC int
-verifydata()
-{
-       register struct mapstate *ms;
-       register int i;
-       int errors = 0;
-
-       mapstate = (struct mapstate *)
-               mach_malloc("map state", mapsize * sizeof(struct mapstate));
-       for (ms = mapstate; ms < &mapstate[mapsize]; ms++) {
-               ms->flags = 0;
-               ms->hashix = ms->physix = -2;
-       }
-
-       /*
-        * Check the free list
-        */
-       checkhashchain(&free_mapping, M_ISFREE, -1);
-       /*
-        * Check every hash chain
-        */
-       for (i = 0; i < vtopsize; i++)
-               checkhashchain(&vtop_table[i], M_ISHASH, i);
-       /*
-        * Check every phys chain
-        */
-       for (i = 0; i < physsize; i++)
-               checkphyschain(&phys_table[i].phys_link, M_ISPHYS, i);
-       /*
-        * Cycle through mapstate looking for anomolies
-        */
-       ms = mapstate;
-       for (i = 0; i < mapsize; i++) {
-               switch (ms->flags) {
-               case M_ISFREE:
-               case M_ISHASH|M_ISPHYS:
-                       break;
-               case 0:
-                       merror(ms, "not found");
-                       errors++;
-                       break;
-               case M_ISHASH:
-                       merror(ms, "in vtop but not phys");
-                       errors++;
-                       break;
-               case M_ISPHYS:
-                       merror(ms, "in phys but not vtop");
-                       errors++;
-                       break;
-               default:
-                       merror(ms, "totally bogus");
-                       errors++;
-                       break;
-               }
-               ms++;
-       }
-       return(errors ? 0 : 1);
-}
-
-STATIC void
-checkhashchain(qhp, flag, ix)
-       queue_entry_t qhp;
-{
-       register queue_entry_t qp, pqp;
-       register struct mapping *mp;
-       struct mapstate *ms;
-
-       qp = qhp->next;
-       /*
-        * First element is not a mapping structure,
-        * chain must be empty.
-        */
-       if (!IS_MAPPTR(qp)) {
-               if (qp != qhp || qp != qhp->prev)
-                       fatal("bad vtop_table header pointer");
-       } else {
-               pqp = qhp;
-               do {
-                       mp = (struct mapping *) qp;
-                       qp = &mp->hash_link;
-                       if (qp->prev != pqp)
-                               fatal("bad hash_link prev pointer");
-                       ms = &mapstate[mp-map_table];
-                       ms->flags |= flag;
-                       ms->hashix = ix;
-                       pqp = (queue_entry_t) mp;
-                       qp = qp->next;
-               } while (IS_MAPPTR(qp));
-               if (qp != qhp)
-                       fatal("bad hash_link next pointer");
-       }
-}
-
-STATIC void
-checkphyschain(qhp, flag, ix)
-       queue_entry_t qhp;
-{
-       register queue_entry_t qp, pqp;
-       register struct mapping *mp;
-       struct mapstate *ms;
-
-       qp = qhp->next;
-       /*
-        * First element is not a mapping structure,
-        * chain must be empty.
-        */
-       if (!IS_MAPPTR(qp)) {
-               if (qp != qhp || qp != qhp->prev)
-                       fatal("bad phys_table header pointer");
-       } else {
-               pqp = qhp;
-               do {
-                       mp = (struct mapping *) qp;
-                       qp = &mp->phys_link;
-                       if (qp->prev != pqp)
-                               fatal("bad phys_link prev pointer");
-                       ms = &mapstate[mp-map_table];
-                       ms->flags |= flag;
-                       ms->physix = ix;
-                       pqp = (queue_entry_t) mp;
-                       qp = qp->next;
-               } while (IS_MAPPTR(qp));
-               if (qp != qhp)
-                       fatal("bad phys_link next pointer");
-       }
-}
-
-STATIC void
-merror(ms, str)
-       struct mapstate *ms;
-       char *str;
-{
-       terminal_ours();
-       fflush(stdout);
-       fprintf(stderr,
-               "vtophys: %s: %c%c%c, hashix %d, physix %d, mapping %x\n",
-               str,
-               (ms->flags & M_ISFREE) ? 'F' : '-',
-               (ms->flags & M_ISHASH) ? 'H' : '-',
-               (ms->flags & M_ISPHYS) ? 'P' : '-',
-               ms->hashix, ms->physix, &map_table[ms-mapstate]);
-       return_to_top_level();
-}
-
-STATIC int
-mach_read(str, from, top, size)
-       char *str;
-       CORE_ADDR from;
-       char *top;
-       int size;
-{
-       CORE_ADDR paddr;
-
-       if (from == ~0)
-               from = ksym_lookup(str);
-       paddr = vtophys(0, from);
-       if (paddr == ~0 || physrd(paddr, top, size) != 0)
-               fatal("cannot read %s", str);
-}
-
-STATIC char *
-mach_malloc(str, size)
-       char *str;
-       int size;
-{
-       char *ptr = (char *) malloc(size);
-
-       if (ptr == 0)
-               fatal("no memory for %s", str);
-       return(ptr);
-}
-#endif
-
-#ifdef KERNELDEBUG
-void
-_initialize_hp9k8_dep()
-{
-       add_com ("process-address", class_obscure, set_paddr_command,
-"The process identified by (ps-style) ADDR becomes the\n\
-\"current\" process context for kernel debugging.");
-       add_com_alias ("paddr", "process-address", class_obscure, 0);
-       add_com ("virtual-to-physical", class_obscure, vtop_command,
-"Translates the kernel virtual address ADDR into a physical address.");
-       add_com_alias ("vtop", "virtual-to-physical", class_obscure, 0);
-}
-#endif
index 8c8c33f..e69de29 100644 (file)
@@ -1,424 +0,0 @@
-/* Machine-dependent code which would otherwise be in infptrace.c,
-   for GDB, the GNU debugger.  This code is for the HP PA-RISC cpu.
-   Copyright 1986, 1987, 1989, 1990, 1991, 1992 Free Software Foundation, Inc.
-
-   Contributed by the Center for Software Science at the
-   University of Utah (pa-gdb-bugs@cs.utah.edu).
-
-This file is part of GDB.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-#include "defs.h"
-#include "frame.h"
-#include "inferior.h"
-#include "target.h"
-
-#ifdef USG
-#include <sys/types.h>
-#endif
-
-#include <sys/param.h>
-#include <sys/dir.h>
-#include <signal.h>
-#include <sys/ioctl.h>
-
-#include <sys/ptrace.h>
-
-
-#ifndef PT_ATTACH
-#define PT_ATTACH PTRACE_ATTACH
-#endif
-#ifndef PT_DETACH
-#define PT_DETACH PTRACE_DETACH
-#endif
-
-#include "gdbcore.h"
-#include <sys/user.h>          /* After a.out.h  */
-#include <sys/file.h>
-#include <sys/stat.h>
-\f
-/* This function simply calls ptrace with the given arguments.  
-   It exists so that all calls to ptrace are isolated in this 
-   machine-dependent file. */
-int
-call_ptrace (request, pid, addr, data)
-     int request, pid;
-     PTRACE_ARG3_TYPE addr;
-     int data;
-{
-  return ptrace (request, pid, addr, data, 0);
-}
-
-#ifdef DEBUG_PTRACE
-/* For the rest of the file, use an extra level of indirection */
-/* This lets us breakpoint usefully on call_ptrace. */
-#define ptrace call_ptrace
-#endif
-
-void
-kill_inferior ()
-{
-  if (inferior_pid == 0)
-    return;
-  ptrace (PT_EXIT, inferior_pid, (PTRACE_ARG3_TYPE) 0, 0, 0); /* PT_EXIT = PT_KILL ? */
-  wait ((int *)0);
-  target_mourn_inferior ();
-}
-
-/* Resume execution of the inferior process.
-   If STEP is nonzero, single-step it.
-   If SIGNAL is nonzero, give it that signal.  */
-
-void
-child_resume (step, signal)
-     int step;
-     int signal;
-{
-  errno = 0;
-
-  /* An address of (PTRACE_ARG3_TYPE) 1 tells ptrace to continue from where
-     it was. (If GDB wanted it to start some other way, we have already
-     written a new PC value to the child.)  */
-
-  if (step)
-    ptrace (PT_SINGLE, inferior_pid, (PTRACE_ARG3_TYPE) 1, signal, 0);
-  else
-    ptrace (PT_CONTIN, inferior_pid, (PTRACE_ARG3_TYPE) 1, signal, 0);
-
-  if (errno)
-    perror_with_name ("ptrace");
-}
-\f
-#ifdef ATTACH_DETACH
-/* Nonzero if we are debugging an attached process rather than
-   an inferior.  */
-extern int attach_flag;
-
-/* Start debugging the process whose number is PID.  */
-int
-attach (pid)
-     int pid;
-{
-  errno = 0;
-  ptrace (PT_ATTACH, pid, (PTRACE_ARG3_TYPE) 0, 0, 0);
-  if (errno)
-    perror_with_name ("ptrace");
-  attach_flag = 1;
-  return pid;
-}
-
-/* Stop debugging the process whose number is PID
-   and continue it with signal number SIGNAL.
-   SIGNAL = 0 means just continue it.  */
-
-void
-detach (signal)
-     int signal;
-{
-  errno = 0;
-  ptrace (PT_DETACH, inferior_pid, (PTRACE_ARG3_TYPE) 1, signal, 0);
-  if (errno)
-    perror_with_name ("ptrace");
-  attach_flag = 0;
-}
-#endif /* ATTACH_DETACH */
-\f
-#if !defined (FETCH_INFERIOR_REGISTERS)
-
-/* KERNEL_U_ADDR is the amount to subtract from u.u_ar0
-   to get the offset in the core file of the register values.  */
-#if defined (KERNEL_U_ADDR_BSD)
-/* Get kernel_u_addr using BSD-style nlist().  */
-CORE_ADDR kernel_u_addr;
-
-#include <a.out.gnu.h>         /* For struct nlist */
-
-void
-_initialize_kernel_u_addr ()
-{
-  struct nlist names[2];
-
-  names[0].n_un.n_name = "_u";
-  names[1].n_un.n_name = NULL;
-  if (nlist ("/vmunix", names) == 0)
-    kernel_u_addr = names[0].n_value;
-  else
-    fatal ("Unable to get kernel u area address.");
-}
-#endif /* KERNEL_U_ADDR_BSD.  */
-
-#if defined (KERNEL_U_ADDR_HPUX)
-/* Get kernel_u_addr using HPUX-style nlist().  */
-CORE_ADDR kernel_u_addr;
-
-struct hpnlist {      
-        char *          n_name;
-        long            n_value;  
-        unsigned char   n_type;   
-        unsigned char   n_length;  
-        short           n_almod;   
-        short           n_unused;
-};
-static struct hpnlist nl[] = {{ "_u", -1, }, { (char *) 0, }};
-
-/* read the value of the u area from the hp-ux kernel */
-void _initialize_kernel_u_addr ()
-{
-    struct user u;
-    nlist ("/hp-ux", &nl);
-    kernel_u_addr = nl[0].n_value;
-}
-#endif /* KERNEL_U_ADDR_HPUX.  */
-
-#if !defined (offsetof)
-#define offsetof(TYPE, MEMBER) ((unsigned long) &((TYPE *)0)->MEMBER)
-#endif
-
-/* U_REGS_OFFSET is the offset of the registers within the u area.  */
-#if !defined (U_REGS_OFFSET)
-#define U_REGS_OFFSET \
-  ptrace (PT_READ_U, inferior_pid, \
-          (PTRACE_ARG3_TYPE) (offsetof (struct user, u_ar0)), 0, 0) \
-    - KERNEL_U_ADDR
-#endif
-
-/* Registers we shouldn't try to fetch.  */
-#if !defined (CANNOT_FETCH_REGISTER)
-#define CANNOT_FETCH_REGISTER(regno) 0
-#endif
-
-/* Fetch one register.  */
-
-static void
-fetch_register (regno)
-     int regno;
-{
-  register unsigned int regaddr;
-  char buf[MAX_REGISTER_RAW_SIZE];
-  char mess[128];                              /* For messages */
-  register int i;
-
-  /* Offset of registers within the u area.  */
-  unsigned int offset;
-
-  if (CANNOT_FETCH_REGISTER (regno))
-    {
-      bzero (buf, REGISTER_RAW_SIZE (regno));  /* Supply zeroes */
-      supply_register (regno, buf);
-      return;
-    }
-
-  offset = U_REGS_OFFSET;
-
-  regaddr = register_addr (regno, offset);
-  for (i = 0; i < REGISTER_RAW_SIZE (regno); i += sizeof (int))
-    {
-      errno = 0;
-      *(int *) &buf[i] = ptrace (PT_RUREGS, inferior_pid,
-                                (PTRACE_ARG3_TYPE) regaddr, 0, 0);
-      regaddr += sizeof (int);
-      if (errno != 0)
-       {
-         sprintf (mess, "reading register %s (#%d)", reg_names[regno], regno);
-         perror_with_name (mess);
-       }
-    }
-  if (regno == PCOQ_HEAD_REGNUM || regno == PCOQ_TAIL_REGNUM)
-    buf[3] &= ~0x3;
-  supply_register (regno, buf);
-}
-
-
-/* Fetch all registers, or just one, from the child process.  */
-
-void
-fetch_inferior_registers (regno)
-     int regno;
-{
-  if (regno == -1)
-    for (regno = 0; regno < NUM_REGS; regno++)
-      fetch_register (regno);
-  else
-    fetch_register (regno);
-}
-
-/* Registers we shouldn't try to store.  */
-#if !defined (CANNOT_STORE_REGISTER)
-#define CANNOT_STORE_REGISTER(regno) 0
-#endif
-
-/* Store our register values back into the inferior.
-   If REGNO is -1, do this for all registers.
-   Otherwise, REGNO specifies which register (so we can save time).  */
-
-void
-store_inferior_registers (regno)
-     int regno;
-{
-  register unsigned int regaddr;
-  char buf[80];
-  extern char registers[];
-  register int i;
-
-  unsigned int offset = U_REGS_OFFSET;
-
-  if (regno >= 0)
-    {
-      regaddr = register_addr (regno, offset);
-      for (i = 0; i < REGISTER_RAW_SIZE (regno); i += sizeof(int))
-       {
-         errno = 0;
-         ptrace (PT_WUAREA, inferior_pid, (PTRACE_ARG3_TYPE) regaddr,
-                 *(int *) &registers[REGISTER_BYTE (regno) + i], 0);
-         if (errno != 0)
-           {
-             sprintf (buf, "writing register number %d(%d)", regno, i);
-             perror_with_name (buf);
-           }
-         regaddr += sizeof(int);
-       }
-    }
-  else
-    {
-      for (regno = 0; regno < NUM_REGS; regno++)
-       {
-         if (CANNOT_STORE_REGISTER (regno))
-           continue;
-         regaddr = register_addr (regno, offset);
-         for (i = 0; i < REGISTER_RAW_SIZE (regno); i += sizeof(int))
-           {
-             errno = 0;
-             ptrace (PT_WUAREA, inferior_pid, (PTRACE_ARG3_TYPE) regaddr,
-                     *(int *) &registers[REGISTER_BYTE (regno) + i], 0);
-             if (errno != 0)
-               {
-                 sprintf (buf, "writing register number %d(%d)", regno, i);
-                 perror_with_name (buf);
-               }
-             regaddr += sizeof(int);
-           }
-       }
-    }
-  return;
-}
-#endif /* !defined (FETCH_INFERIOR_REGISTERS).  */
-\f
-/* NOTE! I tried using PTRACE_READDATA, etc., to read and write memory
-   in the NEW_SUN_PTRACE case.
-   It ought to be straightforward.  But it appears that writing did
-   not write the data that I specified.  I cannot understand where
-   it got the data that it actually did write.  */
-
-/* Copy LEN bytes to or from inferior's memory starting at MEMADDR
-   to debugger memory starting at MYADDR.   Copy to inferior if
-   WRITE is nonzero.
-  
-   Returns the length copied, which is either the LEN argument or zero.
-   This xfer function does not do partial moves, since child_ops
-   doesn't allow memory operations to cross below us in the target stack
-   anyway.  */
-
-int
-child_xfer_memory (memaddr, myaddr, len, write, target)
-     CORE_ADDR memaddr;
-     char *myaddr;
-     int len;
-     int write;
-     struct target_ops *target;                /* ignored */
-{
-  register int i;
-  /* Round starting address down to longword boundary.  */
-  register CORE_ADDR addr = memaddr & - sizeof (int);
-  /* Round ending address up; get number of longwords that makes.  */
-  register int count
-    = (((memaddr + len) - addr) + sizeof (int) - 1) / sizeof (int);
-  /* Allocate buffer of that many longwords.  */
-  register int *buffer = (int *) alloca (count * sizeof (int));
-
-  if (write)
-    {
-      /* Fill start and end extra bytes of buffer with existing memory data.  */
-
-      if (addr != memaddr || len < (int)sizeof (int)) {
-       /* Need part of initial word -- fetch it.  */
-        buffer[0] = ptrace (PT_RIUSER, inferior_pid,
-                           (PTRACE_ARG3_TYPE) addr, 0, 0);
-      }
-
-      if (count > 1)           /* FIXME, avoid if even boundary */
-       {
-         buffer[count - 1]
-           = ptrace (PT_RIUSER, inferior_pid,
-                     (PTRACE_ARG3_TYPE) (addr + (count - 1) * sizeof (int)),
-                     0, 0);
-       }
-
-      /* Copy data to be written over corresponding part of buffer */
-
-      bcopy (myaddr, (char *) buffer + (memaddr & (sizeof (int) - 1)), len);
-
-      /* Write the entire buffer.  */
-
-      for (i = 0; i < count; i++, addr += sizeof (int))
-       {
-#if 0
-/* The HP-UX kernel crashes if you use PT_WDUSER to write into the text
-   segment.  FIXME -- does it work to write into the data segment using
-   WIUSER, or do these idiots really expect us to figure out which segment
-   the address is in, so we can use a separate system call for it??!  */
-         errno = 0;
-         ptrace (PT_WDUSER, inferior_pid, (PTRACE_ARG3_TYPE) addr,
-                 buffer[i], 0);
-         if (errno)
-#endif
-           {
-             /* Using the appropriate one (I or D) is necessary for
-                Gould NP1, at least.  */
-             errno = 0;
-             ptrace (PT_WIUSER, inferior_pid, (PTRACE_ARG3_TYPE) addr,
-                     buffer[i], 0);
-           }
-         if (errno)
-           return 0;
-       }
-    }
-  else
-    {
-      /* Read all the longwords */
-      for (i = 0; i < count; i++, addr += sizeof (int))
-       {
-         errno = 0;
-         buffer[i] = ptrace (PT_RIUSER, inferior_pid,
-                             (PTRACE_ARG3_TYPE) addr, 0, 0);
-         if (errno)
-           return 0;
-         QUIT;
-       }
-
-      /* Copy appropriate bytes out of the buffer.  */
-      bcopy ((char *) buffer + (memaddr & (sizeof (int) - 1)), myaddr, len);
-    }
-  return len;
-}
-
-
-
-
-int
-getpagesize()
-{
-  return(4096);
-}
diff --git a/gdb/i386-xdep.c b/gdb/i386-xdep.c
deleted file mode 100644 (file)
index 67e904b..0000000
+++ /dev/null
@@ -1,250 +0,0 @@
-/* Intel 386 stuff.
-   Copyright (C) 1988, 1989, 1991 Free Software Foundation, Inc.
-
-This file is part of GDB.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-#include "defs.h"
-#include "frame.h"
-#include "inferior.h"
-#include "language.h"
-#include "gdbcore.h"
-
-#ifdef USG
-#include <sys/types.h>
-#endif
-
-#include <sys/param.h>
-#include <sys/dir.h>
-#include <signal.h>
-#include <sys/user.h>
-#include <sys/ioctl.h>
-#include <fcntl.h>
-
-#include <sys/file.h>
-#include <sys/stat.h>
-
-#include <sys/reg.h>
-#include "ieee-float.h"
-
-#include "target.h"
-
-extern struct ext_format ext_format_i387;
-\f
-/* this table must line up with REGISTER_NAMES in tm-i386v.h */
-/* symbols like 'EAX' come from <sys/reg.h> */
-static int regmap[] = 
-{
-  EAX, ECX, EDX, EBX,
-  UESP, EBP, ESI, EDI,
-  EIP, EFL, CS, SS,
-  DS, ES, FS, GS,
-};
-
-/* blockend is the value of u.u_ar0, and points to the
- * place where GS is stored
- */
-
-int
-i386_register_u_addr (blockend, regnum)
-     int blockend;
-     int regnum;
-{
-#if 0
-  /* this will be needed if fp registers are reinstated */
-  /* for now, you can look at them with 'info float'
-   * sys5 wont let you change them with ptrace anyway
-   */
-  if (regnum >= FP0_REGNUM && regnum <= FP7_REGNUM) 
-    {
-      int ubase, fpstate;
-      struct user u;
-      ubase = blockend + 4 * (SS + 1) - KSTKSZ;
-      fpstate = ubase + ((char *)&u.u_fpstate - (char *)&u);
-      return (fpstate + 0x1c + 10 * (regnum - FP0_REGNUM));
-    } 
-  else
-#endif
-    return (blockend + 4 * regmap[regnum]);
-  
-}
-
-#if 0
-/* mauro@olympus 1991.10.20 -- compiling the following code causes
-   undefined symbols at link time, specifically: corechan, have_inferior_p */
-struct env387 
-{
-  unsigned short control;
-  unsigned short r0;
-  unsigned short status;
-  unsigned short r1;
-  unsigned short tag;
-  unsigned short r2;
-  unsigned long eip;
-  unsigned short code_seg;
-  unsigned short opcode;
-  unsigned long operand;
-  unsigned short operand_seg;
-  unsigned short r3;
-  unsigned char regs[8][10];
-};
-
-static
-print_387_status (status, ep)
-     unsigned short status;
-     struct env387 *ep;
-{
-  int i;
-  int bothstatus;
-  int top;
-  int fpreg;
-  unsigned char *p;
-  
-  bothstatus = ((status != 0) && (ep->status != 0));
-  if (status != 0) 
-    {
-      if (bothstatus)
-       printf ("u: ");
-      print_387_status_word (status);
-    }
-  
-  if (ep->status != 0) 
-    {
-      if (bothstatus)
-       printf ("e: ");
-      print_387_status_word (ep->status);
-    }
-  
-  print_387_control_word (ep->control);
-  printf ("last exception: ");
-  printf ("opcode %s; ", local_hex_string(ep->opcode));
-  printf ("pc %s:", local_hex_string(ep->code_seg));
-  printf ("%s; ", local_hex_string(ep->eip));
-  printf ("operand %s", local_hex_string(ep->operand_seg));
-  printf (":%s\n", local_hex_string(ep->operand));
-  
-  top = (ep->status >> 11) & 7;
-  
-  printf ("regno  tag  msb              lsb  value\n");
-  for (fpreg = 7; fpreg >= 0; fpreg--) 
-    {
-      double val;
-      
-      printf ("%s %d: ", fpreg == top ? "=>" : "  ", fpreg);
-      
-      switch ((ep->tag >> (fpreg * 2)) & 3) 
-       {
-       case 0: printf ("valid "); break;
-       case 1: printf ("zero  "); break;
-       case 2: printf ("trap  "); break;
-       case 3: printf ("empty "); break;
-       }
-      for (i = 9; i >= 0; i--)
-       printf ("%02x", ep->regs[fpreg][i]);
-      
-      ieee_extended_to_double (&ext_format_i387, (char *)ep->regs[fpreg],
-                              &val);
-      printf ("  %g\n", val);
-    }
-  if (ep->r0)
-    warning ("reserved0 is %s\n", local_hex_string(ep->r0));
-  if (ep->r1)
-    warning ("reserved1 is %s\n", local_hex_string(ep->r1));
-  if (ep->r2)
-    warning ("reserved2 is %s\n", local_hex_string(ep->r2));
-  if (ep->r3)
-    warning ("reserved3 is %s\n", local_hex_string(ep->r3));
-}
-
-#ifndef U_FPSTATE
-#define U_FPSTATE(u) u.u_fpstate
-#endif
-
-i386_float_info ()
-{
-  struct user u; /* just for address computations */
-  int i;
-  /* fpstate defined in <sys/user.h> */
-  struct fpstate *fpstatep;
-  char buf[sizeof (struct fpstate) + 2 * sizeof (int)];
-  unsigned int uaddr;
-  char fpvalid = 0;
-  unsigned int rounded_addr;
-  unsigned int rounded_size;
-  extern int corechan;
-  int skip;
-  
-  uaddr = (char *)&u.u_fpvalid - (char *)&u;
-  if (target_has_execution)
-    {
-      unsigned int data;
-      unsigned int mask;
-      
-      rounded_addr = uaddr & -sizeof (int);
-      data = ptrace (3, inferior_pid, (PTRACE_ARG3_TYPE) rounded_addr, 0);
-      mask = 0xff << ((uaddr - rounded_addr) * 8);
-      
-      fpvalid = ((data & mask) != 0);
-    } 
-#if 0
-  else 
-    {
-      if (lseek (corechan, uaddr, 0) < 0)
-       perror ("seek on core file");
-      if (myread (corechan, &fpvalid, 1) < 0) 
-       perror ("read on core file");
-      
-    }
-#endif /* no core support yet */
-  
-  if (fpvalid == 0) 
-    {
-      printf ("no floating point status saved\n");
-      return;
-    }
-  
-  uaddr = (char *)&U_FPSTATE(u) - (char *)&u;
-  if (target_has_execution)
-    {
-      int *ip;
-      
-      rounded_addr = uaddr & -sizeof (int);
-      rounded_size = (((uaddr + sizeof (struct fpstate)) - uaddr) +
-                     sizeof (int) - 1) / sizeof (int);
-      skip = uaddr - rounded_addr;
-      
-      ip = (int *)buf;
-      for (i = 0; i < rounded_size; i++) 
-       {
-         *ip++ = ptrace (3, inferior_pid, (PTRACE_ARG3_TYPE) rounded_addr, 0);
-         rounded_addr += sizeof (int);
-       }
-    } 
-#if 0
-  else 
-    {
-      if (lseek (corechan, uaddr, 0) < 0)
-       perror_with_name ("seek on core file");
-      if (myread (corechan, buf, sizeof (struct fpstate)) < 0) 
-       perror_with_name ("read from core file");
-      skip = 0;
-    }
- #endif        /* 0 */ 
-
-  fpstatep = (struct fpstate *)(buf + skip);
-  print_387_status (fpstatep->status, (struct env387 *)fpstatep->state);
-}
-#endif /* mauro@olympus 1991.10.20 */
diff --git a/gdb/m68k-opcode.h b/gdb/m68k-opcode.h
deleted file mode 100755 (executable)
index 1a8f7d2..0000000
+++ /dev/null
@@ -1,1679 +0,0 @@
-/* Opcode table for m68000/m68020 and m68881.
-   Copyright (C) 1989, Free Software Foundation.
-
-This file is part of GDB, the GNU Debugger and GAS, the GNU Assembler.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-struct m68k_opcode
-{
-  char *name;
-  unsigned long opcode;
-  unsigned long  match;
-  char *args;
-};
-
-/* We store four bytes of opcode for all opcodes because that
-   is the most any of them need.  The actual length of an instruction
-   is always at least 2 bytes, and is as much longer as necessary to
-   hold the operands it has.
-
-   The match component is a mask saying which bits must match
-   particular opcode in order for an instruction to be an instance
-   of that opcode.
-
-   The args component is a string containing two characters
-   for each operand of the instruction.  The first specifies
-   the kind of operand; the second, the place it is stored.  */
-
-/* Kinds of operands:
-   D  data register only.  Stored as 3 bits.
-   A  address register only.  Stored as 3 bits.
-   R  either kind of register.  Stored as 4 bits.
-   F  floating point coprocessor register only.   Stored as 3 bits.
-   O  an offset (or width): immediate data 0-31 or data register.
-      Stored as 6 bits in special format for BF... insns.
-   +  autoincrement only.  Stored as 3 bits (number of the address register).
-   -  autodecrement only.  Stored as 3 bits (number of the address register).
-   Q  quick immediate data.  Stored as 3 bits.
-      This matches an immediate operand only when value is in range 1 .. 8.
-   M  moveq immediate data.  Stored as 8 bits.
-      This matches an immediate operand only when value is in range -128..127
-   T  trap vector immediate data.  Stored as 4 bits.
-
-   k  K-factor for fmove.p instruction.   Stored as a 7-bit constant or
-      a three bit register offset, depending on the field type.
-
-   #  immediate data.  Stored in special places (b, w or l)
-      which say how many bits to store.
-   ^  immediate data for floating point instructions.   Special places
-      are offset by 2 bytes from '#'...
-   B  pc-relative address, converted to an offset
-      that is treated as immediate data.
-   d  displacement and register.  Stores the register as 3 bits
-      and stores the displacement in the entire second word.
-
-   C  the CCR.  No need to store it; this is just for filtering validity.
-   S  the SR.  No need to store, just as with CCR.
-   U  the USP.  No need to store, just as with CCR.
-
-   I  Coprocessor ID.   Not printed if 1.   The Coprocessor ID is always
-      extracted from the 'd' field of word one, which means that an extended
-      coprocessor opcode can be skipped using the 'i' place, if needed.
-
-   s  System Control register for the floating point coprocessor.
-   S  List of system control registers for floating point coprocessor.
-
-   J  Misc register for movec instruction, stored in 'j' format.
-       Possible values:
-       000     SFC     Source Function Code reg
-       001     DFC     Data Function Code reg
-       002     CACR    Cache Control Register
-       800     USP     User Stack Pointer
-       801     VBR     Vector Base reg
-       802     CAAR    Cache Address Register
-       803     MSP     Master Stack Pointer
-       804     ISP     Interrupt Stack Pointer
-
-    L  Register list of the type d0-d7/a0-a7 etc.
-       (New!  Improved!  Can also hold fp0-fp7, as well!)
-       The assembler tries to see if the registers match the insn by
-       looking at where the insn wants them stored.
-
-    l  Register list like L, but with all the bits reversed.
-       Used for going the other way. . .
-
- They are all stored as 6 bits using an address mode and a register number;
- they differ in which addressing modes they match.
-
-   *  all                                      (modes 0-6,7.*)
-   ~  alterable memory                         (modes 2-6,7.0,7.1)(not 0,1,7.~)
-   %  alterable                                        (modes 0-6,7.0,7.1)(not 7.~)
-   ;  data                                     (modes 0,2-6,7.*)(not 1)
-   @  data, but not immediate                  (modes 0,2-6,7.? ? ?)(not 1,7.?)  This may really be ;, the 68020 book says it is
-   !  control                                  (modes 2,5,6,7.*-)(not 0,1,3,4,7.4)
-   &  alterable control                                (modes 2,5,6,7.0,7.1)(not 0,1,7.? ? ?)
-   $  alterable data                           (modes 0,2-6,7.0,7.1)(not 1,7.~)
-   ?  alterable control, or data register      (modes 0,2,5,6,7.0,7.1)(not 1,3,4,7.~)
-   /  control, or data register                        (modes 0,2,5,6,7.0,7.1,7.2,7.3)(not 1,3,4,7.4)
-*/
-
-/* JF: for the 68851 */
-/*
-   I didn't use much imagination in choosing the 
-   following codes, so many of them aren't very
-   mnemonic. -rab
-
-   P  pmmu register
-       Possible values:
-       000     TC      Translation Control reg
-       100     CAL     Current Access Level
-       101     VAL     Validate Access Level
-       110     SCC     Stack Change Control
-       111     AC      Access Control
-
-   W  wide pmmu registers
-       Possible values:
-       001     DRP     Dma Root Pointer
-       010     SRP     Supervisor Root Pointer
-       011     CRP     Cpu Root Pointer
-
-   f   function code register
-       0       SFC
-       1       DFC
-
-   V   VAL register only
-
-   X   BADx, BACx
-       100     BAD     Breakpoint Acknowledge Data
-       101     BAC     Breakpoint Acknowledge Control
-
-   Y   PSR
-   Z   PCSR
-
-   |   memory          (modes 2-6, 7.*)
-
-*/
-
-/* Places to put an operand, for non-general operands:
-   s  source, low bits of first word.
-   d  dest, shifted 9 in first word
-   1  second word, shifted 12
-   2  second word, shifted 6
-   3  second word, shifted 0
-   4  third word, shifted 12
-   5  third word, shifted 6
-   6  third word, shifted 0
-   7  second word, shifted 7
-   8  second word, shifted 10
-   D  store in both place 1 and place 3; for divul and divsl.
-   b  second word, low byte
-   w  second word (entire)
-   l  second and third word (entire)
-   g  branch offset for bra and similar instructions.
-      The place to store depends on the magnitude of offset.
-   t  store in both place 7 and place 8; for floating point operations
-   c  branch offset for cpBcc operations.
-      The place to store is word two if bit six of word one is zero,
-      and words two and three if bit six of word one is one.
-   i  Increment by two, to skip over coprocessor extended operands.   Only
-      works with the 'I' format.
-   k  Dynamic K-factor field.   Bits 6-4 of word 2, used as a register number.
-      Also used for dynamic fmovem instruction.
-   C  floating point coprocessor constant - 7 bits.  Also used for static
-      K-factors...
-   j  Movec register #, stored in 12 low bits of second word.
-
- Places to put operand, for general operands:
-   d  destination, shifted 6 bits in first word
-   b  source, at low bit of first word, and immediate uses one byte
-   w  source, at low bit of first word, and immediate uses two bytes
-   l  source, at low bit of first word, and immediate uses four bytes
-   s  source, at low bit of first word.
-      Used sometimes in contexts where immediate is not allowed anyway.
-   f  single precision float, low bit of 1st word, immediate uses 4 bytes
-   F  double precision float, low bit of 1st word, immediate uses 8 bytes
-   x  extended precision float, low bit of 1st word, immediate uses 12 bytes
-   p  packed float, low bit of 1st word, immediate uses 12 bytes
-*/
-
-#define one(x) ((x) << 16)
-#define two(x, y) (((x) << 16) + y)
-
-/*
-       *** DANGER WILL ROBINSON ***
-
-   The assembler requires that all instances of the same mnemonic must be
-   consecutive.  If they aren't, the assembler will bomb at runtime
- */
-struct m68k_opcode m68k_opcodes[] =
-{
-{"abcd",       one(0140400),           one(0170770),           "DsDd"},
-{"abcd",       one(0140410),           one(0170770),           "-s-d"},
-
-               /* Add instructions */
-{"addal",      one(0150700),           one(0170700),           "*lAd"},
-{"addaw",      one(0150300),           one(0170700),           "*wAd"},
-{"addib",      one(0003000),           one(0177700),           "#b$b"},
-{"addil",      one(0003200),           one(0177700),           "#l$l"},
-{"addiw",      one(0003100),           one(0177700),           "#w$w"},
-{"addqb",      one(0050000),           one(0170700),           "Qd$b"},
-{"addql",      one(0050200),           one(0170700),           "Qd%l"},
-{"addqw",      one(0050100),           one(0170700),           "Qd%w"},
-
-{"addb",       one(0050000),           one(0170700),           "Qd$b"},        /* addq written as add */
-{"addb",       one(0003000),           one(0177700),           "#b$b"},        /* addi written as add */
-{"addb",       one(0150000),           one(0170700),           ";bDd"},        /* addb <ea>,   Dd */
-{"addb",       one(0150400),           one(0170700),           "Dd~b"},        /* addb Dd,     <ea> */
-
-{"addw",       one(0050100),           one(0170700),           "Qd%w"},        /* addq written as add */
-{"addw",       one(0003100),           one(0177700),           "#w$w"},        /* addi written as add */
-{"addw",       one(0150300),           one(0170700),           "*wAd"},        /* adda written as add */
-{"addw",       one(0150100),           one(0170700),           "*wDd"},        /* addw <ea>,   Dd */
-{"addw",       one(0150500),           one(0170700),           "Dd~w"},        /* addw Dd,     <ea> */
-
-{"addl",       one(0050200),           one(0170700),           "Qd%l"},        /* addq written as add */
-{"addl",       one(0003200),           one(0177700),           "#l$l"},        /* addi written as add */
-{"addl",       one(0150700),           one(0170700),           "*lAd"},        /* adda written as add */
-{"addl",       one(0150200),           one(0170700),           "*lDd"},        /* addl <ea>,   Dd */
-{"addl",       one(0150600),           one(0170700),           "Dd~l"},        /* addl Dd,     <ea> */
-
-{"addxb",      one(0150400),           one(0170770),           "DsDd"},
-{"addxb",      one(0150410),           one(0170770),           "-s-d"},
-{"addxl",      one(0150600),           one(0170770),           "DsDd"},
-{"addxl",      one(0150610),           one(0170770),           "-s-d"},
-{"addxw",      one(0150500),           one(0170770),           "DsDd"},
-{"addxw",      one(0150510),           one(0170770),           "-s-d"},
-
-{"andib",      one(0001000),           one(0177700),           "#b$b"},
-{"andib",      one(0001074),           one(0177777),           "#bCb"},        /* andi to ccr */
-{"andiw",      one(0001100),           one(0177700),           "#w$w"},
-{"andiw",      one(0001174),           one(0177777),           "#wSw"},        /* andi to sr */
-{"andil",      one(0001200),           one(0177700),           "#l$l"},
-
-{"andb",       one(0001000),           one(0177700),           "#b$b"},        /* andi written as or */
-{"andb",       one(0001074),           one(0177777),           "#bCb"},        /* andi to ccr */
-{"andb",       one(0140000),           one(0170700),           ";bDd"},        /* memory to register */
-{"andb",       one(0140400),           one(0170700),           "Dd~b"},        /* register to memory */
-{"andw",       one(0001100),           one(0177700),           "#w$w"},        /* andi written as or */
-{"andw",       one(0001174),           one(0177777),           "#wSw"},        /* andi to sr */
-{"andw",       one(0140100),           one(0170700),           ";wDd"},        /* memory to register */
-{"andw",       one(0140500),           one(0170700),           "Dd~w"},        /* register to memory */
-{"andl",       one(0001200),           one(0177700),           "#l$l"},        /* andi written as or */
-{"andl",       one(0140200),           one(0170700),           ";lDd"},        /* memory to register */
-{"andl",       one(0140600),           one(0170700),           "Dd~l"},        /* register to memory */
-
-{"aslb",       one(0160400),           one(0170770),           "QdDs"},
-{"aslb",       one(0160440),           one(0170770),           "DdDs"},
-{"asll",       one(0160600),           one(0170770),           "QdDs"},
-{"asll",       one(0160640),           one(0170770),           "DdDs"},
-{"aslw",       one(0160500),           one(0170770),           "QdDs"},
-{"aslw",       one(0160540),           one(0170770),           "DdDs"},
-{"aslw",       one(0160700),           one(0177700),           "~s"},  /* Shift memory */
-{"asrb",       one(0160000),           one(0170770),           "QdDs"},
-{"asrb",       one(0160040),           one(0170770),           "DdDs"},
-{"asrl",       one(0160200),           one(0170770),           "QdDs"},
-{"asrl",       one(0160240),           one(0170770),           "DdDs"},
-{"asrw",       one(0160100),           one(0170770),           "QdDs"},
-{"asrw",       one(0160140),           one(0170770),           "DdDs"},
-{"asrw",       one(0160300),           one(0177700),           "~s"},  /* Shift memory */
-
-{"bhi",                one(0061000),           one(0177400),           "Bg"},
-{"bls",                one(0061400),           one(0177400),           "Bg"},
-{"bcc",                one(0062000),           one(0177400),           "Bg"},
-{"bcs",                one(0062400),           one(0177400),           "Bg"},
-{"bne",                one(0063000),           one(0177400),           "Bg"},
-{"beq",                one(0063400),           one(0177400),           "Bg"},
-{"bvc",                one(0064000),           one(0177400),           "Bg"},
-{"bvs",                one(0064400),           one(0177400),           "Bg"},
-{"bpl",                one(0065000),           one(0177400),           "Bg"},
-{"bmi",                one(0065400),           one(0177400),           "Bg"},
-{"bge",                one(0066000),           one(0177400),           "Bg"},
-{"blt",                one(0066400),           one(0177400),           "Bg"},
-{"bgt",                one(0067000),           one(0177400),           "Bg"},
-{"ble",                one(0067400),           one(0177400),           "Bg"},
-
-{"bchg",       one(0000500),           one(0170700),           "Dd$s"},
-{"bchg",       one(0004100),           one(0177700),           "#b$s"},
-{"bclr",       one(0000600),           one(0170700),           "Dd$s"},
-{"bclr",       one(0004200),           one(0177700),           "#b$s"},
-{"bfchg",      two(0165300, 0),        two(0177700, 0170000),  "?sO2O3"},
-{"bfclr",      two(0166300, 0),        two(0177700, 0170000),  "?sO2O3"},
-{"bfexts",     two(0165700, 0),        two(0177700, 0100000),  "/sO2O3D1"},
-{"bfextu",     two(0164700, 0),        two(0177700, 0100000),  "/sO2O3D1"},
-{"bfffo",      two(0166700, 0),        two(0177700, 0100000),  "/sO2O3D1"},
-{"bfins",      two(0167700, 0),        two(0177700, 0100000),  "D1?sO2O3"},
-{"bfset",      two(0167300, 0),        two(0177700, 0170000),  "?sO2O3"},
-{"bftst",      two(0164300, 0),        two(0177700, 0170000),  "/sO2O3"},
-{"bset",       one(0000700),           one(0170700),           "Dd$s"},
-{"bset",       one(0004300),           one(0177700),           "#b$s"},
-{"btst",       one(0000400),           one(0170700),           "Dd@s"},
-{"btst",       one(0004000),           one(0177700),           "#b@s"},
-
-{"bkpt",       one(0044110),           one(0177770),           "Qs"},
-{"bra",                one(0060000),           one(0177400),           "Bg"},
-{"bras",       one(0060000),           one(0177400),           "Bw"},
-{"bsr",                one(0060400),           one(0177400),           "Bg"},
-{"bsrs",       one(0060400),           one(0177400),           "Bw"},
-
-{"callm",      one(0003300),           one(0177700),           "#b!s"},
-{"cas2l",      two(0007374, 0),        two(0177777, 0107070),  "D3D6D2D5R1R4"}, /* JF FOO this is really a 3 word ins */
-{"cas2w",      two(0006374, 0),        two(0177777, 0107070),  "D3D6D2D5R1R4"}, /* JF ditto */
-{"casb",       two(0005300, 0),        two(0177700, 0177070),  "D3D2~s"},
-{"casl",       two(0007300, 0),        two(0177700, 0177070),  "D3D2~s"},
-{"casw",       two(0006300, 0),        two(0177700, 0177070),  "D3D2~s"},
-
-/*  {"chk",    one(0040600),           one(0170700),           ";wDd"}, JF FOO this looks wrong */
-{"chk2b",      two(0000300, 0004000),  two(0177700, 07777),    "!sR1"},
-{"chk2l",      two(0002300, 0004000),  two(0177700, 07777),    "!sR1"},
-{"chk2w",      two(0001300, 0004000),  two(0177700, 07777),    "!sR1"},
-{"chkl",       one(0040400),           one(0170700),           ";lDd"},
-{"chkw",       one(0040600),           one(0170700),           ";wDd"},
-{"clrb",       one(0041000),           one(0177700),           "$s"},
-{"clrl",       one(0041200),           one(0177700),           "$s"},
-{"clrw",       one(0041100),           one(0177700),           "$s"},
-
-{"cmp2b",      two(0000300, 0),        two(0177700, 07777),    "!sR1"},
-{"cmp2l",      two(0002300, 0),        two(0177700, 07777),    "!sR1"},
-{"cmp2w",      two(0001300, 0),        two(0177700, 07777),    "!sR1"},
-{"cmpal",      one(0130700),           one(0170700),           "*lAd"},
-{"cmpaw",      one(0130300),           one(0170700),           "*wAd"},
-{"cmpib",      one(0006000),           one(0177700),           "#b;b"},
-{"cmpil",      one(0006200),           one(0177700),           "#l;l"},
-{"cmpiw",      one(0006100),           one(0177700),           "#w;w"},
-{"cmpb",       one(0006000),           one(0177700),           "#b;b"},        /* cmpi written as cmp */
-{"cmpb",       one(0130000),           one(0170700),           ";bDd"},
-{"cmpw",       one(0006100),           one(0177700),           "#w;w"},
-{"cmpw",       one(0130100),           one(0170700),           "*wDd"},
-{"cmpw",       one(0130300),           one(0170700),           "*wAd"},        /* cmpa written as cmp */
-{"cmpl",       one(0006200),           one(0177700),           "#l;l"},
-{"cmpl",       one(0130200),           one(0170700),           "*lDd"},
-{"cmpl",       one(0130700),           one(0170700),           "*lAd"},
-{"cmpmb",      one(0130410),           one(0170770),           "+s+d"},
-{"cmpml",      one(0130610),           one(0170770),           "+s+d"},
-{"cmpmw",      one(0130510),           one(0170770),           "+s+d"},
-
-{"dbcc",       one(0052310),           one(0177770),           "DsBw"},
-{"dbcs",       one(0052710),           one(0177770),           "DsBw"},
-{"dbeq",       one(0053710),           one(0177770),           "DsBw"},
-{"dbf",                one(0050710),           one(0177770),           "DsBw"},
-{"dbge",       one(0056310),           one(0177770),           "DsBw"},
-{"dbgt",       one(0057310),           one(0177770),           "DsBw"},
-{"dbhi",       one(0051310),           one(0177770),           "DsBw"},
-{"dble",       one(0057710),           one(0177770),           "DsBw"},
-{"dbls",       one(0051710),           one(0177770),           "DsBw"},
-{"dblt",       one(0056710),           one(0177770),           "DsBw"},
-{"dbmi",       one(0055710),           one(0177770),           "DsBw"},
-{"dbne",       one(0053310),           one(0177770),           "DsBw"},
-{"dbpl",       one(0055310),           one(0177770),           "DsBw"},
-{"dbra",       one(0050710),           one(0177770),           "DsBw"},
-{"dbt",                one(0050310),           one(0177770),           "DsBw"},
-{"dbvc",       one(0054310),           one(0177770),           "DsBw"},
-{"dbvs",       one(0054710),           one(0177770),           "DsBw"},
-
-{"divsl",      two(0046100, 0006000),  two(0177700, 0107770),  ";lD3D1"},
-{"divsl",      two(0046100, 0004000),  two(0177700, 0107770),  ";lDD"},
-{"divsll",     two(0046100, 0004000),  two(0177700, 0107770),  ";lD3D1"},
-{"divsw",      one(0100700),           one(0170700),           ";wDd"},
-{"divs",       one(0100700),           one(0170700),           ";wDd"},
-{"divul",      two(0046100, 0002000),  two(0177700, 0107770),  ";lD3D1"},
-{"divul",      two(0046100, 0000000),  two(0177700, 0107770),  ";lDD"},
-{"divull",     two(0046100, 0000000),  two(0177700, 0107770),  ";lD3D1"},
-{"divuw",      one(0100300),           one(0170700),           ";wDd"},
-{"divu",       one(0100300),           one(0170700),           ";wDd"},
-{"eorb",       one(0005000),           one(0177700),           "#b$s"},        /* eori written as or */
-{"eorb",       one(0005074),           one(0177777),           "#bCs"},        /* eori to ccr */
-{"eorb",       one(0130400),           one(0170700),           "Dd$s"},        /* register to memory */
-{"eorib",      one(0005000),           one(0177700),           "#b$s"},
-{"eorib",      one(0005074),           one(0177777),           "#bCs"},        /* eori to ccr */
-{"eoril",      one(0005200),           one(0177700),           "#l$s"},
-{"eoriw",      one(0005100),           one(0177700),           "#w$s"},
-{"eoriw",      one(0005174),           one(0177777),           "#wSs"},        /* eori to sr */
-{"eorl",       one(0005200),           one(0177700),           "#l$s"},
-{"eorl",       one(0130600),           one(0170700),           "Dd$s"},
-{"eorw",       one(0005100),           one(0177700),           "#w$s"},
-{"eorw",       one(0005174),           one(0177777),           "#wSs"},        /* eori to sr */
-{"eorw",       one(0130500),           one(0170700),           "Dd$s"},
-
-{"exg",                one(0140500),           one(0170770),           "DdDs"},
-{"exg",                one(0140510),           one(0170770),           "AdAs"},
-{"exg",                one(0140610),           one(0170770),           "DdAs"},
-{"exg",                one(0140610),           one(0170770),           "AsDd"},
-
-{"extw",       one(0044200),           one(0177770),           "Ds"},
-{"extl",       one(0044300),           one(0177770),           "Ds"},
-{"extbl",      one(0044700),           one(0177770),           "Ds"},
-{"extb.l",     one(0044700),           one(0177770),           "Ds"},  /* Not sure we should support this one*/
-
-{"illegal",    one(0045374),           one(0177777),           ""},
-{"jmp",                one(0047300),           one(0177700),           "!s"},
-{"jsr",                one(0047200),           one(0177700),           "!s"},
-{"lea",                one(0040700),           one(0170700),           "!sAd"},
-{"linkw",      one(0047120),           one(0177770),           "As#w"},
-{"linkl",      one(0044010),           one(0177770),           "As#l"},
-{"link",       one(0047120),           one(0177770),           "As#w"},
-{"link",       one(0044010),           one(0177770),           "As#l"},
-
-{"lslb",       one(0160410),           one(0170770),           "QdDs"},        /* lsrb #Q,     Ds */
-{"lslb",       one(0160450),           one(0170770),           "DdDs"},        /* lsrb Dd,     Ds */
-{"lslw",       one(0160510),           one(0170770),           "QdDs"},        /* lsrb #Q,     Ds */
-{"lslw",       one(0160550),           one(0170770),           "DdDs"},        /* lsrb Dd,     Ds */
-{"lslw",       one(0161700),           one(0177700),           "~s"},  /* Shift memory */
-{"lsll",       one(0160610),           one(0170770),           "QdDs"},        /* lsrb #Q,     Ds */
-{"lsll",       one(0160650),           one(0170770),           "DdDs"},        /* lsrb Dd,     Ds */
-
-{"lsrb",       one(0160010),           one(0170770),           "QdDs"} /* lsrb #Q,     Ds */,
-{"lsrb",       one(0160050),           one(0170770),           "DdDs"},        /* lsrb Dd,     Ds */
-{"lsrl",       one(0160210),           one(0170770),           "QdDs"},        /* lsrb #Q,     Ds */
-{"lsrl",       one(0160250),           one(0170770),           "DdDs"},        /* lsrb #Q,     Ds */
-{"lsrw",       one(0160110),           one(0170770),           "QdDs"},        /* lsrb #Q,     Ds */
-{"lsrw",       one(0160150),           one(0170770),           "DdDs"},        /* lsrb #Q,     Ds */
-{"lsrw",       one(0161300),           one(0177700),           "~s"},  /* Shift memory */
-
-{"moveal",     one(0020100),           one(0170700),           "*lAd"},
-{"moveaw",     one(0030100),           one(0170700),           "*wAd"},
-{"moveb",      one(0010000),           one(0170000),           ";b$d"},        /* move */
-{"movel",      one(0070000),           one(0170400),           "MsDd"},        /* moveq written as move */
-{"movel",      one(0020000),           one(0170000),           "*l$d"},
-{"movel",      one(0020100),           one(0170700),           "*lAd"},
-{"movel",      one(0047140),           one(0177770),           "AsUd"},        /* move to USP */
-{"movel",      one(0047150),           one(0177770),           "UdAs"},        /* move from USP */
-
-{"movec",      one(0047173),           one(0177777),           "R1Jj"},
-{"movec",      one(0047173),           one(0177777),           "R1#j"},
-{"movec",      one(0047172),           one(0177777),           "JjR1"},
-{"movec",      one(0047172),           one(0177777),           "#jR1"},
-
-/* JF added these next four for the assembler */
-{"moveml",     one(0044300),           one(0177700),           "Lw&s"},        /* movem reg to mem. */
-{"moveml",     one(0044340),           one(0177770),           "lw-s"},        /* movem reg to autodecrement. */
-{"moveml",     one(0046300),           one(0177700),           "!sLw"},        /* movem mem to reg. */
-{"moveml",     one(0046330),           one(0177770),           "+sLw"},        /* movem autoinc to reg. */
-
-{"moveml",     one(0044300),           one(0177700),           "#w&s"},        /* movem reg to mem. */
-{"moveml",     one(0044340),           one(0177770),           "#w-s"},        /* movem reg to autodecrement. */
-{"moveml",     one(0046300),           one(0177700),           "!s#w"},        /* movem mem to reg. */
-{"moveml",     one(0046330),           one(0177770),           "+s#w"},        /* movem autoinc to reg. */
-
-/* JF added these next four for the assembler */
-{"movemw",     one(0044200),           one(0177700),           "Lw&s"},        /* movem reg to mem. */
-{"movemw",     one(0044240),           one(0177770),           "lw-s"},        /* movem reg to autodecrement. */
-{"movemw",     one(0046200),           one(0177700),           "!sLw"},        /* movem mem to reg. */
-{"movemw",     one(0046230),           one(0177770),           "+sLw"},        /* movem autoinc to reg. */
-
-{"movemw",     one(0044200),           one(0177700),           "#w&s"},        /* movem reg to mem. */
-{"movemw",     one(0044240),           one(0177770),           "#w-s"},        /* movem reg to autodecrement. */
-{"movemw",     one(0046200),           one(0177700),           "!s#w"},        /* movem mem to reg. */
-{"movemw",     one(0046230),           one(0177770),           "+s#w"},        /* movem autoinc to reg. */
-
-{"movepl",     one(0000510),           one(0170770),           "dsDd"},        /* memory to register */
-{"movepl",     one(0000710),           one(0170770),           "Ddds"},        /* register to memory */
-{"movepw",     one(0000410),           one(0170770),           "dsDd"},        /* memory to register */
-{"movepw",     one(0000610),           one(0170770),           "Ddds"},        /* register to memory */
-{"moveq",      one(0070000),           one(0170400),           "MsDd"},
-{"movew",      one(0030000),           one(0170000),           "*w$d"},
-{"movew",      one(0030100),           one(0170700),           "*wAd"},        /* movea,       written as move */
-{"movew",      one(0040300),           one(0177700),           "Ss$s"},        /* Move from sr */
-{"movew",      one(0041300),           one(0177700),           "Cs$s"},        /* Move from ccr */
-{"movew",      one(0042300),           one(0177700),           ";wCd"},        /* move to ccr */
-{"movew",      one(0043300),           one(0177700),           ";wSd"},        /* move to sr */
-
-{"movesb",     two(0007000, 0),        two(0177700, 07777),    "~sR1"},         /* moves from memory */
-{"movesb",     two(0007000, 04000),    two(0177700, 07777),    "R1~s"},         /* moves to memory */
-{"movesl",     two(0007200, 0),        two(0177700, 07777),    "~sR1"},         /* moves from memory */
-{"movesl",     two(0007200, 04000),    two(0177700, 07777),    "R1~s"},         /* moves to memory */
-{"movesw",     two(0007100, 0),        two(0177700, 07777),    "~sR1"},         /* moves from memory */
-{"movesw",     two(0007100, 04000),    two(0177700, 07777),    "R1~s"},         /* moves to memory */
-
-{"mulsl",      two(0046000, 004000),   two(0177700, 0107770),  ";lD1"},
-{"mulsl",      two(0046000, 006000),   two(0177700, 0107770),  ";lD3D1"},
-{"mulsw",      one(0140700),           one(0170700),           ";wDd"},
-{"muls",       one(0140700),           one(0170700),           ";wDd"},
-{"mulul",      two(0046000, 000000),   two(0177700, 0107770),  ";lD1"},
-{"mulul",      two(0046000, 002000),   two(0177700, 0107770),  ";lD3D1"},
-{"muluw",      one(0140300),           one(0170700),           ";wDd"},
-{"mulu",       one(0140300),           one(0170700),           ";wDd"},
-{"nbcd",       one(0044000),           one(0177700),           "$s"},
-{"negb",       one(0042000),           one(0177700),           "$s"},
-{"negl",       one(0042200),           one(0177700),           "$s"},
-{"negw",       one(0042100),           one(0177700),           "$s"},
-{"negxb",      one(0040000),           one(0177700),           "$s"},
-{"negxl",      one(0040200),           one(0177700),           "$s"},
-{"negxw",      one(0040100),           one(0177700),           "$s"},
-{"nop",                one(0047161),           one(0177777),           ""},
-{"notb",       one(0043000),           one(0177700),           "$s"},
-{"notl",       one(0043200),           one(0177700),           "$s"},
-{"notw",       one(0043100),           one(0177700),           "$s"},
-
-{"orb",                one(0000000),           one(0177700),           "#b$s"},        /* ori written as or */
-{"orb",                one(0000074),           one(0177777),           "#bCs"},        /* ori to ccr */
-{"orb",                one(0100000),           one(0170700),           ";bDd"},        /* memory to register */
-{"orb",                one(0100400),           one(0170700),           "Dd~s"},        /* register to memory */
-{"orib",       one(0000000),           one(0177700),           "#b$s"},
-{"orib",       one(0000074),           one(0177777),           "#bCs"},        /* ori to ccr */
-{"oril",       one(0000200),           one(0177700),           "#l$s"},
-{"oriw",       one(0000100),           one(0177700),           "#w$s"},
-{"oriw",       one(0000174),           one(0177777),           "#wSs"},        /* ori to sr */
-{"orl",                one(0000200),           one(0177700),           "#l$s"},
-{"orl",                one(0100200),           one(0170700),           ";lDd"},        /* memory to register */
-{"orl",                one(0100600),           one(0170700),           "Dd~s"},        /* register to memory */
-{"orw",                one(0000100),           one(0177700),           "#w$s"},
-{"orw",                one(0000174),           one(0177777),           "#wSs"},        /* ori to sr */
-{"orw",                one(0100100),           one(0170700),           ";wDd"},        /* memory to register */
-{"orw",                one(0100500),           one(0170700),           "Dd~s"},        /* register to memory */
-
-{"pack",       one(0100500),           one(0170770),           "DsDd#w"},      /* pack Ds,     Dd,     #w */
-{"pack",       one(0100510),           one(0170770),           "-s-d#w"},      /* pack -(As),  -(Ad),  #w */
-{"pea",                one(0044100),           one(0177700),           "!s"},
-{"reset",      one(0047160),           one(0177777),           ""},
-
-{"rolb",       one(0160430),           one(0170770),           "QdDs"},        /* rorb #Q,     Ds */
-{"rolb",       one(0160470),           one(0170770),           "DdDs"},        /* rorb Dd,     Ds */
-{"roll",       one(0160630),           one(0170770),           "QdDs"},        /* rorb #Q,     Ds */
-{"roll",       one(0160670),           one(0170770),           "DdDs"},        /* rorb Dd,     Ds */
-{"rolw",       one(0160530),           one(0170770),           "QdDs"},        /* rorb #Q,     Ds */
-{"rolw",       one(0160570),           one(0170770),           "DdDs"},        /* rorb Dd,     Ds */
-{"rolw",       one(0163700),           one(0177700),           "~s"},  /* Rotate memory */
-{"rorb",       one(0160030),           one(0170770),           "QdDs"},        /* rorb #Q,     Ds */
-{"rorb",       one(0160070),           one(0170770),           "DdDs"},        /* rorb Dd,     Ds */
-{"rorl",       one(0160230),           one(0170770),           "QdDs"},        /* rorb #Q,     Ds */
-{"rorl",       one(0160270),           one(0170770),           "DdDs"},        /* rorb Dd,     Ds */
-{"rorw",       one(0160130),           one(0170770),           "QdDs"},        /* rorb #Q,     Ds */
-{"rorw",       one(0160170),           one(0170770),           "DdDs"},        /* rorb Dd,     Ds */
-{"rorw",       one(0163300),           one(0177700),           "~s"},  /* Rotate memory */
-
-{"roxlb",      one(0160420),           one(0170770),           "QdDs"},        /* roxrb #Q,    Ds */
-{"roxlb",      one(0160460),           one(0170770),           "DdDs"},        /* roxrb Dd,    Ds */
-{"roxll",      one(0160620),           one(0170770),           "QdDs"},        /* roxrb #Q,    Ds */
-{"roxll",      one(0160660),           one(0170770),           "DdDs"},        /* roxrb Dd,    Ds */
-{"roxlw",      one(0160520),           one(0170770),           "QdDs"},        /* roxrb #Q,    Ds */
-{"roxlw",      one(0160560),           one(0170770),           "DdDs"},        /* roxrb Dd,    Ds */
-{"roxlw",      one(0162700),           one(0177700),           "~s"},  /* Rotate memory */
-{"roxrb",      one(0160020),           one(0170770),           "QdDs"},        /* roxrb #Q,    Ds */
-{"roxrb",      one(0160060),           one(0170770),           "DdDs"},        /* roxrb Dd,    Ds */
-{"roxrl",      one(0160220),           one(0170770),           "QdDs"},        /* roxrb #Q,    Ds */
-{"roxrl",      one(0160260),           one(0170770),           "DdDs"},        /* roxrb Dd,    Ds */
-{"roxrw",      one(0160120),           one(0170770),           "QdDs"},        /* roxrb #Q,    Ds */
-{"roxrw",      one(0160160),           one(0170770),           "DdDs"},        /* roxrb Dd,    Ds */
-{"roxrw",      one(0162300),           one(0177700),           "~s"},  /* Rotate memory */
-
-{"rtd",                one(0047164),           one(0177777),           "#w"},
-{"rte",                one(0047163),           one(0177777),           ""},
-{"rtm",                one(0003300),           one(0177760),           "Rs"},
-{"rtr",                one(0047167),           one(0177777),           ""},
-{"rts",                one(0047165),           one(0177777),           ""},
-
-{"scc",                one(0052300),           one(0177700),           "$s"},
-{"scs",                one(0052700),           one(0177700),           "$s"},
-{"seq",                one(0053700),           one(0177700),           "$s"},
-{"sf",         one(0050700),           one(0177700),           "$s"},
-{"sge",                one(0056300),           one(0177700),           "$s"},
-{"sgt",                one(0057300),           one(0177700),           "$s"},
-{"shi",                one(0051300),           one(0177700),           "$s"},
-{"sle",                one(0057700),           one(0177700),           "$s"},
-{"sls",                one(0051700),           one(0177700),           "$s"},
-{"slt",                one(0056700),           one(0177700),           "$s"},
-{"smi",                one(0055700),           one(0177700),           "$s"},
-{"sne",                one(0053300),           one(0177700),           "$s"},
-{"spl",                one(0055300),           one(0177700),           "$s"},
-{"st",         one(0050300),           one(0177700),           "$s"},
-{"svc",                one(0054300),           one(0177700),           "$s"},
-{"svs",                one(0054700),           one(0177700),           "$s"},
-
-{"sbcd",       one(0100400),           one(0170770),           "DsDd"},
-{"sbcd",       one(0100410),           one(0170770),           "-s-d"},
-{"stop",       one(0047162),           one(0177777),           "#w"},
-
-{"subal",      one(0110700),           one(0170700),           "*lAd"},
-{"subaw",      one(0110300),           one(0170700),           "*wAd"},
-{"subb",       one(0050400),           one(0170700),           "Qd%s"},        /* subq written as sub */
-{"subb",       one(0002000),           one(0177700),           "#b$s"},        /* subi written as sub */
-{"subb",       one(0110000),           one(0170700),           ";bDd"},        /* subb ? ?,    Dd */
-{"subb",       one(0110400),           one(0170700),           "Dd~s"},        /* subb Dd,     ? ? */
-{"subib",      one(0002000),           one(0177700),           "#b$s"},
-{"subil",      one(0002200),           one(0177700),           "#l$s"},
-{"subiw",      one(0002100),           one(0177700),           "#w$s"},
-{"subl",       one(0050600),           one(0170700),           "Qd%s"},
-{"subl",       one(0002200),           one(0177700),           "#l$s"},
-{"subl",       one(0110700),           one(0170700),           "*lAd"},
-{"subl",       one(0110200),           one(0170700),           "*lDd"},
-{"subl",       one(0110600),           one(0170700),           "Dd~s"},
-{"subqb",      one(0050400),           one(0170700),           "Qd%s"},
-{"subql",      one(0050600),           one(0170700),           "Qd%s"},
-{"subqw",      one(0050500),           one(0170700),           "Qd%s"},
-{"subw",       one(0050500),           one(0170700),           "Qd%s"},
-{"subw",       one(0002100),           one(0177700),           "#w$s"},
-{"subw",       one(0110100),           one(0170700),           "*wDd"},
-{"subw",       one(0110300),           one(0170700),           "*wAd"},        /* suba written as sub */
-{"subw",       one(0110500),           one(0170700),           "Dd~s"},
-{"subxb",      one(0110400),           one(0170770),           "DsDd"},        /* subxb Ds,    Dd */
-{"subxb",      one(0110410),           one(0170770),           "-s-d"},        /* subxb -(As), -(Ad) */
-{"subxl",      one(0110600),           one(0170770),           "DsDd"},
-{"subxl",      one(0110610),           one(0170770),           "-s-d"},
-{"subxw",      one(0110500),           one(0170770),           "DsDd"},
-{"subxw",      one(0110510),           one(0170770),           "-s-d"},
-
-{"swap",       one(0044100),           one(0177770),           "Ds"},
-       
-{"tas",                one(0045300),           one(0177700),           "$s"},
-{"trap",       one(0047100),           one(0177760),           "Ts"},
-
-{"trapcc",     one(0052374),           one(0177777),           ""},
-{"trapcs",     one(0052774),           one(0177777),           ""},
-{"trapeq",     one(0053774),           one(0177777),           ""},
-{"trapf",      one(0050774),           one(0177777),           ""},
-{"trapge",     one(0056374),           one(0177777),           ""},
-{"trapgt",     one(0057374),           one(0177777),           ""},
-{"traphi",     one(0051374),           one(0177777),           ""},
-{"traple",     one(0057774),           one(0177777),           ""},
-{"trapls",     one(0051774),           one(0177777),           ""},
-{"traplt",     one(0056774),           one(0177777),           ""},
-{"trapmi",     one(0055774),           one(0177777),           ""},
-{"trapne",     one(0053374),           one(0177777),           ""},
-{"trappl",     one(0055374),           one(0177777),           ""},
-{"trapt",      one(0050374),           one(0177777),           ""},
-{"trapvc",     one(0054374),           one(0177777),           ""},
-{"trapvs",     one(0054774),           one(0177777),           ""},
-
-{"trapcc.w",   one(0052372),           one(0177777),           ""},
-{"trapcs.w",   one(0052772),           one(0177777),           ""},
-{"trapeq.w",   one(0053772),           one(0177777),           ""},
-{"trapf.w",    one(0050772),           one(0177777),           ""},
-{"trapge.w",   one(0056372),           one(0177777),           ""},
-{"trapgt.w",   one(0057372),           one(0177777),           ""},
-{"traphi.w",   one(0051372),           one(0177777),           ""},
-{"traple.w",   one(0057772),           one(0177777),           ""},
-{"trapls.w",   one(0051772),           one(0177777),           ""},
-{"traplt.w",   one(0056772),           one(0177777),           ""},
-{"trapmi.w",   one(0055772),           one(0177777),           ""},
-{"trapne.w",   one(0053372),           one(0177777),           ""},
-{"trappl.w",   one(0055372),           one(0177777),           ""},
-{"trapt.w",    one(0050372),           one(0177777),           ""},
-{"trapvc.w",   one(0054372),           one(0177777),           ""},
-{"trapvs.w",   one(0054772),           one(0177777),           ""},
-
-{"trapcc.l",   one(0052373),           one(0177777),           ""},
-{"trapcs.l",   one(0052773),           one(0177777),           ""},
-{"trapeq.l",   one(0053773),           one(0177777),           ""},
-{"trapf.l",    one(0050773),           one(0177777),           ""},
-{"trapge.l",   one(0056373),           one(0177777),           ""},
-{"trapgt.l",   one(0057373),           one(0177777),           ""},
-{"traphi.l",   one(0051373),           one(0177777),           ""},
-{"traple.l",   one(0057773),           one(0177777),           ""},
-{"trapls.l",   one(0051773),           one(0177777),           ""},
-{"traplt.l",   one(0056773),           one(0177777),           ""},
-{"trapmi.l",   one(0055773),           one(0177777),           ""},
-{"trapne.l",   one(0053373),           one(0177777),           ""},
-{"trappl.l",   one(0055373),           one(0177777),           ""},
-{"trapt.l",    one(0050373),           one(0177777),           ""},
-{"trapvc.l",   one(0054373),           one(0177777),           ""},
-{"trapvs.l",   one(0054773),           one(0177777),           ""},
-
-{"trapv",      one(0047166),           one(0177777),           ""},
-
-{"tstb",       one(0045000),           one(0177700),           ";b"},
-{"tstw",       one(0045100),           one(0177700),           "*w"},
-{"tstl",       one(0045200),           one(0177700),           "*l"},
-
-{"unlk",       one(0047130),           one(0177770),           "As"},
-{"unpk",       one(0100600),           one(0170770),           "DsDd#w"},
-{"unpk",       one(0100610),           one(0170770),           "-s-d#w"},
-       /* JF floating pt stuff moved down here */
-
-{"fabsb",      two(0xF000, 0x5818),    two(0xF1C0, 0xFC7F),    "Ii;bF7"},
-{"fabsd",      two(0xF000, 0x5418),    two(0xF1C0, 0xFC7F),    "Ii;FF7"},
-{"fabsl",      two(0xF000, 0x4018),    two(0xF1C0, 0xFC7F),    "Ii;lF7"},
-{"fabsp",      two(0xF000, 0x4C18),    two(0xF1C0, 0xFC7F),    "Ii;pF7"},
-{"fabss",      two(0xF000, 0x4418),    two(0xF1C0, 0xFC7F),    "Ii;fF7"},
-{"fabsw",      two(0xF000, 0x5018),    two(0xF1C0, 0xFC7F),    "Ii;wF7"},
-{"fabsx",      two(0xF000, 0x0018),    two(0xF1C0, 0xE07F),    "IiF8F7"},
-{"fabsx",      two(0xF000, 0x4818),    two(0xF1C0, 0xFC7F),    "Ii;xF7"},
-{"fabsx",      two(0xF000, 0x0018),    two(0xF1C0, 0xE07F),    "IiFt"},
-
-{"facosb",     two(0xF000, 0x581C),    two(0xF1C0, 0xFC7F),    "Ii;bF7"},
-{"facosd",     two(0xF000, 0x541C),    two(0xF1C0, 0xFC7F),    "Ii;FF7"},
-{"facosl",     two(0xF000, 0x401C),    two(0xF1C0, 0xFC7F),    "Ii;lF7"},
-{"facosp",     two(0xF000, 0x4C1C),    two(0xF1C0, 0xFC7F),    "Ii;pF7"},
-{"facoss",     two(0xF000, 0x441C),    two(0xF1C0, 0xFC7F),    "Ii;fF7"},
-{"facosw",     two(0xF000, 0x501C),    two(0xF1C0, 0xFC7F),    "Ii;wF7"},
-{"facosx",     two(0xF000, 0x001C),    two(0xF1C0, 0xE07F),    "IiF8F7"},
-{"facosx",     two(0xF000, 0x481C),    two(0xF1C0, 0xFC7F),    "Ii;xF7"},
-{"facosx",     two(0xF000, 0x001C),    two(0xF1C0, 0xE07F),    "IiFt"},
-
-{"faddb",      two(0xF000, 0x5822),    two(0xF1C0, 0xFC7F),    "Ii;bF7"},
-{"faddd",      two(0xF000, 0x5422),    two(0xF1C0, 0xFC7F),    "Ii;FF7"},
-{"faddl",      two(0xF000, 0x4022),    two(0xF1C0, 0xFC7F),    "Ii;lF7"},
-{"faddp",      two(0xF000, 0x4C22),    two(0xF1C0, 0xFC7F),    "Ii;pF7"},
-{"fadds",      two(0xF000, 0x4422),    two(0xF1C0, 0xFC7F),    "Ii;fF7"},
-{"faddw",      two(0xF000, 0x5022),    two(0xF1C0, 0xFC7F),    "Ii;wF7"},
-{"faddx",      two(0xF000, 0x0022),    two(0xF1C0, 0xE07F),    "IiF8F7"},
-{"faddx",      two(0xF000, 0x4822),    two(0xF1C0, 0xFC7F),    "Ii;xF7"},
-/* {"faddx",   two(0xF000, 0x0022),    two(0xF1C0, 0xE07F),    "IiFt"}, JF removed */
-
-{"fasinb",     two(0xF000, 0x580C),    two(0xF1C0, 0xFC7F),    "Ii;bF7"},
-{"fasind",     two(0xF000, 0x540C),    two(0xF1C0, 0xFC7F),    "Ii;FF7"},
-{"fasinl",     two(0xF000, 0x400C),    two(0xF1C0, 0xFC7F),    "Ii;lF7"},
-{"fasinp",     two(0xF000, 0x4C0C),    two(0xF1C0, 0xFC7F),    "Ii;pF7"},
-{"fasins",     two(0xF000, 0x440C),    two(0xF1C0, 0xFC7F),    "Ii;fF7"},
-{"fasinw",     two(0xF000, 0x500C),    two(0xF1C0, 0xFC7F),    "Ii;wF7"},
-{"fasinx",     two(0xF000, 0x000C),    two(0xF1C0, 0xE07F),    "IiF8F7"},
-{"fasinx",     two(0xF000, 0x480C),    two(0xF1C0, 0xFC7F),    "Ii;xF7"},
-{"fasinx",     two(0xF000, 0x000C),    two(0xF1C0, 0xE07F),    "IiFt"},
-
-{"fatanb",     two(0xF000, 0x580A),    two(0xF1C0, 0xFC7F),    "Ii;bF7"},
-{"fatand",     two(0xF000, 0x540A),    two(0xF1C0, 0xFC7F),    "Ii;FF7"},
-{"fatanl",     two(0xF000, 0x400A),    two(0xF1C0, 0xFC7F),    "Ii;lF7"},
-{"fatanp",     two(0xF000, 0x4C0A),    two(0xF1C0, 0xFC7F),    "Ii;pF7"},
-{"fatans",     two(0xF000, 0x440A),    two(0xF1C0, 0xFC7F),    "Ii;fF7"},
-{"fatanw",     two(0xF000, 0x500A),    two(0xF1C0, 0xFC7F),    "Ii;wF7"},
-{"fatanx",     two(0xF000, 0x000A),    two(0xF1C0, 0xE07F),    "IiF8F7"},
-{"fatanx",     two(0xF000, 0x480A),    two(0xF1C0, 0xFC7F),    "Ii;xF7"},
-{"fatanx",     two(0xF000, 0x000A),    two(0xF1C0, 0xE07F),    "IiFt"},
-
-{"fatanhb",    two(0xF000, 0x580D),    two(0xF1C0, 0xFC7F),    "Ii;bF7"},
-{"fatanhd",    two(0xF000, 0x540D),    two(0xF1C0, 0xFC7F),    "Ii;FF7"},
-{"fatanhl",    two(0xF000, 0x400D),    two(0xF1C0, 0xFC7F),    "Ii;lF7"},
-{"fatanhp",    two(0xF000, 0x4C0D),    two(0xF1C0, 0xFC7F),    "Ii;pF7"},
-{"fatanhs",    two(0xF000, 0x440D),    two(0xF1C0, 0xFC7F),    "Ii;fF7"},
-{"fatanhw",    two(0xF000, 0x500D),    two(0xF1C0, 0xFC7F),    "Ii;wF7"},
-{"fatanhx",    two(0xF000, 0x000D),    two(0xF1C0, 0xE07F),    "IiF8F7"},
-{"fatanhx",    two(0xF000, 0x480D),    two(0xF1C0, 0xFC7F),    "Ii;xF7"},
-{"fatanhx",    two(0xF000, 0x000D),    two(0xF1C0, 0xE07F),    "IiFt"},
-
-{"fbeq",       one(0xF081),            one(0xF1BF),            "IdBc"},
-{"fbf",                one(0xF080),            one(0xF1BF),            "IdBc"},
-{"fbge",       one(0xF093),            one(0xF1BF),            "IdBc"},
-{"fbgl",       one(0xF096),            one(0xF1BF),            "IdBc"},
-{"fbgle",      one(0xF097),            one(0xF1BF),            "IdBc"},
-{"fbgt",       one(0xF092),            one(0xF1BF),            "IdBc"},
-{"fble",       one(0xF095),            one(0xF1BF),            "IdBc"},
-{"fblt",       one(0xF094),            one(0xF1BF),            "IdBc"},
-{"fbne",       one(0xF08E),            one(0xF1BF),            "IdBc"},
-{"fbnge",      one(0xF09C),            one(0xF1BF),            "IdBc"},
-{"fbngl",      one(0xF099),            one(0xF1BF),            "IdBc"},
-{"fbngle",     one(0xF098),            one(0xF1BF),            "IdBc"},
-{"fbngt",      one(0xF09D),            one(0xF1BF),            "IdBc"},
-{"fbnle",      one(0xF09A),            one(0xF1BF),            "IdBc"},
-{"fbnlt",      one(0xF09B),            one(0xF1BF),            "IdBc"},
-{"fboge",      one(0xF083),            one(0xF1BF),            "IdBc"},
-{"fbogl",      one(0xF086),            one(0xF1BF),            "IdBc"},
-{"fbogt",      one(0xF082),            one(0xF1BF),            "IdBc"},
-{"fbole",      one(0xF085),            one(0xF1BF),            "IdBc"},
-{"fbolt",      one(0xF084),            one(0xF1BF),            "IdBc"},
-{"fbor",       one(0xF087),            one(0xF1BF),            "IdBc"},
-{"fbseq",      one(0xF091),            one(0xF1BF),            "IdBc"},
-{"fbsf",       one(0xF090),            one(0xF1BF),            "IdBc"},
-{"fbsne",      one(0xF09E),            one(0xF1BF),            "IdBc"},
-{"fbst",       one(0xF09F),            one(0xF1BF),            "IdBc"},
-{"fbt",                one(0xF08F),            one(0xF1BF),            "IdBc"},
-{"fbueq",      one(0xF089),            one(0xF1BF),            "IdBc"},
-{"fbuge",      one(0xF08B),            one(0xF1BF),            "IdBc"},
-{"fbugt",      one(0xF08A),            one(0xF1BF),            "IdBc"},
-{"fbule",      one(0xF08D),            one(0xF1BF),            "IdBc"},
-{"fbult",      one(0xF08C),            one(0xF1BF),            "IdBc"},
-{"fbun",       one(0xF088),            one(0xF1BF),            "IdBc"},
-
-{"fcmpb",      two(0xF000, 0x5838),    two(0xF1C0, 0xFC7F),    "Ii;bF7"},
-{"fcmpd",      two(0xF000, 0x5438),    two(0xF1C0, 0xFC7F),    "Ii;FF7"},
-{"fcmpl",      two(0xF000, 0x4038),    two(0xF1C0, 0xFC7F),    "Ii;lF7"},
-{"fcmpp",      two(0xF000, 0x4C38),    two(0xF1C0, 0xFC7F),    "Ii;pF7"},
-{"fcmps",      two(0xF000, 0x4438),    two(0xF1C0, 0xFC7F),    "Ii;fF7"},
-{"fcmpw",      two(0xF000, 0x5038),    two(0xF1C0, 0xFC7F),    "Ii;wF7"},
-{"fcmpx",      two(0xF000, 0x0038),    two(0xF1C0, 0xE07F),    "IiF8F7"},
-{"fcmpx",      two(0xF000, 0x4838),    two(0xF1C0, 0xFC7F),    "Ii;xF7"},
-/* {"fcmpx",   two(0xF000, 0x0038),    two(0xF1C0, 0xE07F),    "IiFt"}, JF removed */
-
-{"fcosb",      two(0xF000, 0x581D),    two(0xF1C0, 0xFC7F),    "Ii;bF7"},
-{"fcosd",      two(0xF000, 0x541D),    two(0xF1C0, 0xFC7F),    "Ii;FF7"},
-{"fcosl",      two(0xF000, 0x401D),    two(0xF1C0, 0xFC7F),    "Ii;lF7"},
-{"fcosp",      two(0xF000, 0x4C1D),    two(0xF1C0, 0xFC7F),    "Ii;pF7"},
-{"fcoss",      two(0xF000, 0x441D),    two(0xF1C0, 0xFC7F),    "Ii;fF7"},
-{"fcosw",      two(0xF000, 0x501D),    two(0xF1C0, 0xFC7F),    "Ii;wF7"},
-{"fcosx",      two(0xF000, 0x001D),    two(0xF1C0, 0xE07F),    "IiF8F7"},
-{"fcosx",      two(0xF000, 0x481D),    two(0xF1C0, 0xFC7F),    "Ii;xF7"},
-{"fcosx",      two(0xF000, 0x001D),    two(0xF1C0, 0xE07F),    "IiFt"},
-
-{"fcoshb",     two(0xF000, 0x5819),    two(0xF1C0, 0xFC7F),    "Ii;bF7"},
-{"fcoshd",     two(0xF000, 0x5419),    two(0xF1C0, 0xFC7F),    "Ii;FF7"},
-{"fcoshl",     two(0xF000, 0x4019),    two(0xF1C0, 0xFC7F),    "Ii;lF7"},
-{"fcoshp",     two(0xF000, 0x4C19),    two(0xF1C0, 0xFC7F),    "Ii;pF7"},
-{"fcoshs",     two(0xF000, 0x4419),    two(0xF1C0, 0xFC7F),    "Ii;fF7"},
-{"fcoshw",     two(0xF000, 0x5019),    two(0xF1C0, 0xFC7F),    "Ii;wF7"},
-{"fcoshx",     two(0xF000, 0x0019),    two(0xF1C0, 0xE07F),    "IiF8F7"},
-{"fcoshx",     two(0xF000, 0x4819),    two(0xF1C0, 0xFC7F),    "Ii;xF7"},
-{"fcoshx",     two(0xF000, 0x0019),    two(0xF1C0, 0xE07F),    "IiFt"},
-
-{"fdbeq",      two(0xF048, 0x0001),    two(0xF1F8, 0xFFFF),    "IiDsBw"},
-{"fdbf",       two(0xF048, 0x0000),    two(0xF1F8, 0xFFFF),    "IiDsBw"},
-{"fdbge",      two(0xF048, 0x0013),    two(0xF1F8, 0xFFFF),    "IiDsBw"},
-{"fdbgl",      two(0xF048, 0x0016),    two(0xF1F8, 0xFFFF),    "IiDsBw"},
-{"fdbgle",     two(0xF048, 0x0017),    two(0xF1F8, 0xFFFF),    "IiDsBw"},
-{"fdbgt",      two(0xF048, 0x0012),    two(0xF1F8, 0xFFFF),    "IiDsBw"},
-{"fdble",      two(0xF048, 0x0015),    two(0xF1F8, 0xFFFF),    "IiDsBw"},
-{"fdblt",      two(0xF048, 0x0014),    two(0xF1F8, 0xFFFF),    "IiDsBw"},
-{"fdbne",      two(0xF048, 0x000E),    two(0xF1F8, 0xFFFF),    "IiDsBw"},
-{"fdbnge",     two(0xF048, 0x001C),    two(0xF1F8, 0xFFFF),    "IiDsBw"},
-{"fdbngl",     two(0xF048, 0x0019),    two(0xF1F8, 0xFFFF),    "IiDsBw"},
-{"fdbngle",    two(0xF048, 0x0018),    two(0xF1F8, 0xFFFF),    "IiDsBw"},
-{"fdbngt",     two(0xF048, 0x001D),    two(0xF1F8, 0xFFFF),    "IiDsBw"},
-{"fdbnle",     two(0xF048, 0x001A),    two(0xF1F8, 0xFFFF),    "IiDsBw"},
-{"fdbnlt",     two(0xF048, 0x001B),    two(0xF1F8, 0xFFFF),    "IiDsBw"},
-{"fdboge",     two(0xF048, 0x0003),    two(0xF1F8, 0xFFFF),    "IiDsBw"},
-{"fdbogl",     two(0xF048, 0x0006),    two(0xF1F8, 0xFFFF),    "IiDsBw"},
-{"fdbogt",     two(0xF048, 0x0002),    two(0xF1F8, 0xFFFF),    "IiDsBw"},
-{"fdbole",     two(0xF048, 0x0005),    two(0xF1F8, 0xFFFF),    "IiDsBw"},
-{"fdbolt",     two(0xF048, 0x0004),    two(0xF1F8, 0xFFFF),    "IiDsBw"},
-{"fdbor",      two(0xF048, 0x0007),    two(0xF1F8, 0xFFFF),    "IiDsBw"},
-{"fdbseq",     two(0xF048, 0x0011),    two(0xF1F8, 0xFFFF),    "IiDsBw"},
-{"fdbsf",      two(0xF048, 0x0010),    two(0xF1F8, 0xFFFF),    "IiDsBw"},
-{"fdbsne",     two(0xF048, 0x001E),    two(0xF1F8, 0xFFFF),    "IiDsBw"},
-{"fdbst",      two(0xF048, 0x001F),    two(0xF1F8, 0xFFFF),    "IiDsBw"},
-{"fdbt",       two(0xF048, 0x000F),    two(0xF1F8, 0xFFFF),    "IiDsBw"},
-{"fdbueq",     two(0xF048, 0x0009),    two(0xF1F8, 0xFFFF),    "IiDsBw"},
-{"fdbuge",     two(0xF048, 0x000B),    two(0xF1F8, 0xFFFF),    "IiDsBw"},
-{"fdbugt",     two(0xF048, 0x000A),    two(0xF1F8, 0xFFFF),    "IiDsBw"},
-{"fdbule",     two(0xF048, 0x000D),    two(0xF1F8, 0xFFFF),    "IiDsBw"},
-{"fdbult",     two(0xF048, 0x000C),    two(0xF1F8, 0xFFFF),    "IiDsBw"},
-{"fdbun",      two(0xF048, 0x0008),    two(0xF1F8, 0xFFFF),    "IiDsBw"},
-
-{"fdivb",      two(0xF000, 0x5820),    two(0xF1C0, 0xFC7F),    "Ii;bF7"},
-{"fdivd",      two(0xF000, 0x5420),    two(0xF1C0, 0xFC7F),    "Ii;FF7"},
-{"fdivl",      two(0xF000, 0x4020),    two(0xF1C0, 0xFC7F),    "Ii;lF7"},
-{"fdivp",      two(0xF000, 0x4C20),    two(0xF1C0, 0xFC7F),    "Ii;pF7"},
-{"fdivs",      two(0xF000, 0x4420),    two(0xF1C0, 0xFC7F),    "Ii;fF7"},
-{"fdivw",      two(0xF000, 0x5020),    two(0xF1C0, 0xFC7F),    "Ii;wF7"},
-{"fdivx",      two(0xF000, 0x0020),    two(0xF1C0, 0xE07F),    "IiF8F7"},
-{"fdivx",      two(0xF000, 0x4820),    two(0xF1C0, 0xFC7F),    "Ii;xF7"},
-/* {"fdivx",   two(0xF000, 0x0020),    two(0xF1C0, 0xE07F),    "IiFt"}, JF */
-
-{"fetoxb",     two(0xF000, 0x5810),    two(0xF1C0, 0xFC7F),    "Ii;bF7"},
-{"fetoxd",     two(0xF000, 0x5410),    two(0xF1C0, 0xFC7F),    "Ii;FF7"},
-{"fetoxl",     two(0xF000, 0x4010),    two(0xF1C0, 0xFC7F),    "Ii;lF7"},
-{"fetoxp",     two(0xF000, 0x4C10),    two(0xF1C0, 0xFC7F),    "Ii;pF7"},
-{"fetoxs",     two(0xF000, 0x4410),    two(0xF1C0, 0xFC7F),    "Ii;fF7"},
-{"fetoxw",     two(0xF000, 0x5010),    two(0xF1C0, 0xFC7F),    "Ii;wF7"},
-{"fetoxx",     two(0xF000, 0x0010),    two(0xF1C0, 0xE07F),    "IiF8F7"},
-{"fetoxx",     two(0xF000, 0x4810),    two(0xF1C0, 0xFC7F),    "Ii;xF7"},
-{"fetoxx",     two(0xF000, 0x0010),    two(0xF1C0, 0xE07F),    "IiFt"},
-
-{"fetoxm1b",   two(0xF000, 0x5808),    two(0xF1C0, 0xFC7F),    "Ii;bF7"},
-{"fetoxm1d",   two(0xF000, 0x5408),    two(0xF1C0, 0xFC7F),    "Ii;FF7"},
-{"fetoxm1l",   two(0xF000, 0x4008),    two(0xF1C0, 0xFC7F),    "Ii;lF7"},
-{"fetoxm1p",   two(0xF000, 0x4C08),    two(0xF1C0, 0xFC7F),    "Ii;pF7"},
-{"fetoxm1s",   two(0xF000, 0x4408),    two(0xF1C0, 0xFC7F),    "Ii;fF7"},
-{"fetoxm1w",   two(0xF000, 0x5008),    two(0xF1C0, 0xFC7F),    "Ii;wF7"},
-{"fetoxm1x",   two(0xF000, 0x0008),    two(0xF1C0, 0xE07F),    "IiF8F7"},
-{"fetoxm1x",   two(0xF000, 0x4808),    two(0xF1C0, 0xFC7F),    "Ii;xF7"},
-{"fetoxm1x",   two(0xF000, 0x0008),    two(0xF1C0, 0xE07F),    "IiFt"},
-
-{"fgetexpb",   two(0xF000, 0x581E),    two(0xF1C0, 0xFC7F),    "Ii;bF7"},
-{"fgetexpd",   two(0xF000, 0x541E),    two(0xF1C0, 0xFC7F),    "Ii;FF7"},
-{"fgetexpl",   two(0xF000, 0x401E),    two(0xF1C0, 0xFC7F),    "Ii;lF7"},
-{"fgetexpp",   two(0xF000, 0x4C1E),    two(0xF1C0, 0xFC7F),    "Ii;pF7"},
-{"fgetexps",   two(0xF000, 0x441E),    two(0xF1C0, 0xFC7F),    "Ii;fF7"},
-{"fgetexpw",   two(0xF000, 0x501E),    two(0xF1C0, 0xFC7F),    "Ii;wF7"},
-{"fgetexpx",   two(0xF000, 0x001E),    two(0xF1C0, 0xE07F),    "IiF8F7"},
-{"fgetexpx",   two(0xF000, 0x481E),    two(0xF1C0, 0xFC7F),    "Ii;xF7"},
-{"fgetexpx",   two(0xF000, 0x001E),    two(0xF1C0, 0xE07F),    "IiFt"},
-
-{"fgetmanb",   two(0xF000, 0x581F),    two(0xF1C0, 0xFC7F),    "Ii;bF7"},
-{"fgetmand",   two(0xF000, 0x541F),    two(0xF1C0, 0xFC7F),    "Ii;FF7"},
-{"fgetmanl",   two(0xF000, 0x401F),    two(0xF1C0, 0xFC7F),    "Ii;lF7"},
-{"fgetmanp",   two(0xF000, 0x4C1F),    two(0xF1C0, 0xFC7F),    "Ii;pF7"},
-{"fgetmans",   two(0xF000, 0x441F),    two(0xF1C0, 0xFC7F),    "Ii;fF7"},
-{"fgetmanw",   two(0xF000, 0x501F),    two(0xF1C0, 0xFC7F),    "Ii;wF7"},
-{"fgetmanx",   two(0xF000, 0x001F),    two(0xF1C0, 0xE07F),    "IiF8F7"},
-{"fgetmanx",   two(0xF000, 0x481F),    two(0xF1C0, 0xFC7F),    "Ii;xF7"},
-{"fgetmanx",   two(0xF000, 0x001F),    two(0xF1C0, 0xE07F),    "IiFt"},
-
-{"fintb",      two(0xF000, 0x5801),    two(0xF1C0, 0xFC7F),    "Ii;bF7"},
-{"fintd",      two(0xF000, 0x5401),    two(0xF1C0, 0xFC7F),    "Ii;FF7"},
-{"fintl",      two(0xF000, 0x4001),    two(0xF1C0, 0xFC7F),    "Ii;lF7"},
-{"fintp",      two(0xF000, 0x4C01),    two(0xF1C0, 0xFC7F),    "Ii;pF7"},
-{"fints",      two(0xF000, 0x4401),    two(0xF1C0, 0xFC7F),    "Ii;fF7"},
-{"fintw",      two(0xF000, 0x5001),    two(0xF1C0, 0xFC7F),    "Ii;wF7"},
-{"fintx",      two(0xF000, 0x0001),    two(0xF1C0, 0xE07F),    "IiF8F7"},
-{"fintx",      two(0xF000, 0x4801),    two(0xF1C0, 0xFC7F),    "Ii;xF7"},
-{"fintx",      two(0xF000, 0x0001),    two(0xF1C0, 0xE07F),    "IiFt"},
-
-{"fintrzb",    two(0xF000, 0x5803),    two(0xF1C0, 0xFC7F),    "Ii;bF7"},
-{"fintrzd",    two(0xF000, 0x5403),    two(0xF1C0, 0xFC7F),    "Ii;FF7"},
-{"fintrzl",    two(0xF000, 0x4003),    two(0xF1C0, 0xFC7F),    "Ii;lF7"},
-{"fintrzp",    two(0xF000, 0x4C03),    two(0xF1C0, 0xFC7F),    "Ii;pF7"},
-{"fintrzs",    two(0xF000, 0x4403),    two(0xF1C0, 0xFC7F),    "Ii;fF7"},
-{"fintrzw",    two(0xF000, 0x5003),    two(0xF1C0, 0xFC7F),    "Ii;wF7"},
-{"fintrzx",    two(0xF000, 0x0003),    two(0xF1C0, 0xE07F),    "IiF8F7"},
-{"fintrzx",    two(0xF000, 0x4803),    two(0xF1C0, 0xFC7F),    "Ii;xF7"},
-{"fintrzx",    two(0xF000, 0x0003),    two(0xF1C0, 0xE07F),    "IiFt"},
-
-{"flog10b",    two(0xF000, 0x5815),    two(0xF1C0, 0xFC7F),    "Ii;bF7"},
-{"flog10d",    two(0xF000, 0x5415),    two(0xF1C0, 0xFC7F),    "Ii;FF7"},
-{"flog10l",    two(0xF000, 0x4015),    two(0xF1C0, 0xFC7F),    "Ii;lF7"},
-{"flog10p",    two(0xF000, 0x4C15),    two(0xF1C0, 0xFC7F),    "Ii;pF7"},
-{"flog10s",    two(0xF000, 0x4415),    two(0xF1C0, 0xFC7F),    "Ii;fF7"},
-{"flog10w",    two(0xF000, 0x5015),    two(0xF1C0, 0xFC7F),    "Ii;wF7"},
-{"flog10x",    two(0xF000, 0x0015),    two(0xF1C0, 0xE07F),    "IiF8F7"},
-{"flog10x",    two(0xF000, 0x4815),    two(0xF1C0, 0xFC7F),    "Ii;xF7"},
-{"flog10x",    two(0xF000, 0x0015),    two(0xF1C0, 0xE07F),    "IiFt"},
-
-{"flog2b",     two(0xF000, 0x5816),    two(0xF1C0, 0xFC7F),    "Ii;bF7"},
-{"flog2d",     two(0xF000, 0x5416),    two(0xF1C0, 0xFC7F),    "Ii;FF7"},
-{"flog2l",     two(0xF000, 0x4016),    two(0xF1C0, 0xFC7F),    "Ii;lF7"},
-{"flog2p",     two(0xF000, 0x4C16),    two(0xF1C0, 0xFC7F),    "Ii;pF7"},
-{"flog2s",     two(0xF000, 0x4416),    two(0xF1C0, 0xFC7F),    "Ii;fF7"},
-{"flog2w",     two(0xF000, 0x5016),    two(0xF1C0, 0xFC7F),    "Ii;wF7"},
-{"flog2x",     two(0xF000, 0x0016),    two(0xF1C0, 0xE07F),    "IiF8F7"},
-{"flog2x",     two(0xF000, 0x4816),    two(0xF1C0, 0xFC7F),    "Ii;xF7"},
-{"flog2x",     two(0xF000, 0x0016),    two(0xF1C0, 0xE07F),    "IiFt"},
-
-{"flognb",     two(0xF000, 0x5814),    two(0xF1C0, 0xFC7F),    "Ii;bF7"},
-{"flognd",     two(0xF000, 0x5414),    two(0xF1C0, 0xFC7F),    "Ii;FF7"},
-{"flognl",     two(0xF000, 0x4014),    two(0xF1C0, 0xFC7F),    "Ii;lF7"},
-{"flognp",     two(0xF000, 0x4C14),    two(0xF1C0, 0xFC7F),    "Ii;pF7"},
-{"flogns",     two(0xF000, 0x4414),    two(0xF1C0, 0xFC7F),    "Ii;fF7"},
-{"flognw",     two(0xF000, 0x5014),    two(0xF1C0, 0xFC7F),    "Ii;wF7"},
-{"flognx",     two(0xF000, 0x0014),    two(0xF1C0, 0xE07F),    "IiF8F7"},
-{"flognx",     two(0xF000, 0x4814),    two(0xF1C0, 0xFC7F),    "Ii;xF7"},
-{"flognx",     two(0xF000, 0x0014),    two(0xF1C0, 0xE07F),    "IiFt"},
-
-{"flognp1b",   two(0xF000, 0x5806),    two(0xF1C0, 0xFC7F),    "Ii;bF7"},
-{"flognp1d",   two(0xF000, 0x5406),    two(0xF1C0, 0xFC7F),    "Ii;FF7"},
-{"flognp1l",   two(0xF000, 0x4006),    two(0xF1C0, 0xFC7F),    "Ii;lF7"},
-{"flognp1p",   two(0xF000, 0x4C06),    two(0xF1C0, 0xFC7F),    "Ii;pF7"},
-{"flognp1s",   two(0xF000, 0x4406),    two(0xF1C0, 0xFC7F),    "Ii;fF7"},
-{"flognp1w",   two(0xF000, 0x5006),    two(0xF1C0, 0xFC7F),    "Ii;wF7"},
-{"flognp1x",   two(0xF000, 0x0006),    two(0xF1C0, 0xE07F),    "IiF8F7"},
-{"flognp1x",   two(0xF000, 0x4806),    two(0xF1C0, 0xFC7F),    "Ii;xF7"},
-{"flognp1x",   two(0xF000, 0x0006),    two(0xF1C0, 0xE07F),    "IiFt"},
-
-{"fmodb",      two(0xF000, 0x5821),    two(0xF1C0, 0xFC7F),    "Ii;bF7"},
-{"fmodd",      two(0xF000, 0x5421),    two(0xF1C0, 0xFC7F),    "Ii;FF7"},
-{"fmodl",      two(0xF000, 0x4021),    two(0xF1C0, 0xFC7F),    "Ii;lF7"},
-{"fmodp",      two(0xF000, 0x4C21),    two(0xF1C0, 0xFC7F),    "Ii;pF7"},
-{"fmods",      two(0xF000, 0x4421),    two(0xF1C0, 0xFC7F),    "Ii;fF7"},
-{"fmodw",      two(0xF000, 0x5021),    two(0xF1C0, 0xFC7F),    "Ii;wF7"},
-{"fmodx",      two(0xF000, 0x0021),    two(0xF1C0, 0xE07F),    "IiF8F7"},
-{"fmodx",      two(0xF000, 0x4821),    two(0xF1C0, 0xFC7F),    "Ii;xF7"},
-/* {"fmodx",   two(0xF000, 0x0021),    two(0xF1C0, 0xE07F),    "IiFt"}, JF */
-
-{"fmoveb",     two(0xF000, 0x5800),    two(0xF1C0, 0xFC7F),    "Ii;bF7"},              /* fmove from <ea> to fp<n> */
-{"fmoveb",     two(0xF000, 0x7800),    two(0xF1C0, 0xFC7F),    "IiF7@b"},              /* fmove from fp<n> to <ea> */
-{"fmoved",     two(0xF000, 0x5400),    two(0xF1C0, 0xFC7F),    "Ii;FF7"},              /* fmove from <ea> to fp<n> */
-{"fmoved",     two(0xF000, 0x7400),    two(0xF1C0, 0xFC7F),    "IiF7@F"},              /* fmove from fp<n> to <ea> */
-{"fmovel",     two(0xF000, 0x4000),    two(0xF1C0, 0xFC7F),    "Ii;lF7"},              /* fmove from <ea> to fp<n> */
-{"fmovel",     two(0xF000, 0x6000),    two(0xF1C0, 0xFC7F),    "IiF7@l"},              /* fmove from fp<n> to <ea> */
-/* Warning:  The addressing modes on these are probably not right:
-   esp, Areg direct is only allowed for FPI */
-               /* fmove.l from/to system control registers: */
-{"fmovel",     two(0xF000, 0xA000),    two(0xF1C0, 0xE3FF),    "Iis8@s"},
-{"fmovel",     two(0xF000, 0x8000),    two(0xF1C0, 0xE3FF),    "Ii*ls8"},
-
-/* {"fmovel",  two(0xF000, 0xA000),    two(0xF1C0, 0xE3FF),    "Iis8@s"},
-{"fmovel",     two(0xF000, 0x8000),    two(0xF2C0, 0xE3FF),    "Ii*ss8"}, */
-
-{"fmovep",     two(0xF000, 0x4C00),    two(0xF1C0, 0xFC7F),    "Ii;pF7"},              /* fmove from <ea> to fp<n> */
-{"fmovep",     two(0xF000, 0x6C00),    two(0xF1C0, 0xFC00),    "IiF7@pkC"},            /* fmove.p with k-factors: */
-{"fmovep",     two(0xF000, 0x7C00),    two(0xF1C0, 0xFC0F),    "IiF7@pDk"},            /* fmove.p with k-factors: */
-
-{"fmoves",     two(0xF000, 0x4400),    two(0xF1C0, 0xFC7F),    "Ii;fF7"},              /* fmove from <ea> to fp<n> */
-{"fmoves",     two(0xF000, 0x6400),    two(0xF1C0, 0xFC7F),    "IiF7@f"},              /* fmove from fp<n> to <ea> */
-{"fmovew",     two(0xF000, 0x5000),    two(0xF1C0, 0xFC7F),    "Ii;wF7"},              /* fmove from <ea> to fp<n> */
-{"fmovew",     two(0xF000, 0x7000),    two(0xF1C0, 0xFC7F),    "IiF7@w"},              /* fmove from fp<n> to <ea> */
-{"fmovex",     two(0xF000, 0x0000),    two(0xF1C0, 0xE07F),    "IiF8F7"},              /* fmove from <ea> to fp<n> */
-{"fmovex",     two(0xF000, 0x4800),    two(0xF1C0, 0xFC7F),    "Ii;xF7"},              /* fmove from <ea> to fp<n> */
-{"fmovex",     two(0xF000, 0x6800),    two(0xF1C0, 0xFC7F),    "IiF7@x"},              /* fmove from fp<n> to <ea> */
-/* JF removed {"fmovex",       two(0xF000, 0x0000),    two(0xF1C0, 0xE07F),    "IiFt"},                / * fmove from <ea> to fp<n> */
-
-{"fmovecrx",   two(0xF000, 0x5C00),    two(0xF1FF, 0xFC00),    "Ii#CF7"},              /* fmovecr.x #ccc,      FPn */
-{"fmovecr",    two(0xF000, 0x5C00),    two(0xF1FF, 0xFC00),    "Ii#CF7"},
-
-/* Other fmovemx.  */
-{"fmovemx",    two(0xF020, 0xE000),    two(0xF1F8, 0xFF00),    "IdL3-s"},              /* fmovem.x to autodecrement,   static and dynamic */
-{"fmovemx",    two(0xF020, 0xE000),    two(0xF1F8, 0xFF00),    "Id#3-s"},              /* fmovem.x to autodecrement,   static and dynamic */
-
-{"fmovemx",    two(0xF020, 0xE800),    two(0xF1F8, 0xFF8F),    "IiDk-s"},              /* fmovem.x to autodecrement,   static and dynamic */
-
-{"fmovemx",    two(0xF000, 0xF000),    two(0xF1C0, 0xFF00),    "Id#3&s"},              /* fmovem.x to control, static and dynamic: */
-{"fmovemx",    two(0xF000, 0xF800),    two(0xF1C0, 0xFF8F),    "IiDk&s"},              /* fmovem.x to control, static and dynamic: */
-{"fmovemx",    two(0xF000, 0xD000),    two(0xF1C0, 0xFF00),    "Id&s#3"},              /* fmovem.x from control,       static and dynamic: */
-{"fmovemx",    two(0xF000, 0xD800),    two(0xF1C0, 0xFF8F),    "Ii&sDk"},              /* fmovem.x from control,       static and dynamic: */
-{"fmovemx",    two(0xF000, 0xF000),    two(0xF1C0, 0xFF00),    "Idl3&s"},              /* fmovem.x to control, static and dynamic: */
-{"fmovemx",    two(0xF000, 0xD000),    two(0xF1C0, 0xFF00),    "Id&sl3"},              /* fmovem.x from control,       static and dynamic: */
-
-{"fmovemx",    two(0xF018, 0xD000),    two(0xF1F8, 0xFF00),    "Id+sl3"},              /* fmovem.x from autoincrement, static and dynamic: */
-{"fmovemx",    two(0xF018, 0xD000),    two(0xF1F8, 0xFF00),    "Id+s#3"},              /* fmovem.x from autoincrement, static and dynamic: */
-{"fmovemx",    two(0xF018, 0xD800),    two(0xF1F8, 0xFF8F),    "Ii+sDk"},              /* fmovem.x from autoincrement, static and dynamic: */
-
-{"fmoveml",    two(0xF000, 0xA000),    two(0xF1C0, 0xE3FF),    "IiL8@s"},
-{"fmoveml",    two(0xF000, 0xA000),    two(0xF1C0, 0xE3FF),    "Ii#8@s"},
-{"fmoveml",    two(0xF000, 0xA000),    two(0xF1C0, 0xE3FF),    "Iis8@s"},
-
-{"fmoveml",    two(0xF000, 0x8000),    two(0xF2C0, 0xE3FF),    "Ii*sL8"},
-{"fmoveml",    two(0xF000, 0x8000),    two(0xF1C0, 0xE3FF),    "Ii*s#8"},
-{"fmoveml",    two(0xF000, 0x8000),    two(0xF1C0, 0xE3FF),    "Ii*ss8"},
-
-/* fmovemx with register lists */
-{"fmovem",     two(0xF020, 0xE000),    two(0xF1F8, 0xFF00),    "IdL3-s"},              /* fmovem.x to autodecrement,   static and dynamic */
-{"fmovem",     two(0xF000, 0xF000),    two(0xF1C0, 0xFF00),    "Idl3&s"},              /* fmovem.x to control, static and dynamic: */
-{"fmovem",     two(0xF018, 0xD000),    two(0xF1F8, 0xFF00),    "Id+sl3"},              /* fmovem.x from autoincrement, static and dynamic: */
-{"fmovem",     two(0xF000, 0xD000),    two(0xF1C0, 0xFF00),    "Id&sl3"},              /* fmovem.x from control,       static and dynamic: */
-
-       /* Alternate mnemonics for GNU as and GNU CC */
-{"fmovem",     two(0xF020, 0xE000),    two(0xF1F8, 0xFF00),    "Id#3-s"},              /* fmovem.x to autodecrement,   static and dynamic */
-{"fmovem",     two(0xF020, 0xE800),    two(0xF1F8, 0xFF8F),    "IiDk-s"},              /* fmovem.x to autodecrement,   static and dynamic */
-
-{"fmovem",     two(0xF000, 0xF000),    two(0xF1C0, 0xFF00),    "Id#3&s"},              /* fmovem.x to control, static and dynamic: */
-{"fmovem",     two(0xF000, 0xF800),    two(0xF1C0, 0xFF8F),    "IiDk&s"},              /* fmovem.x to control, static and dynamic: */
-
-{"fmovem",     two(0xF018, 0xD000),    two(0xF1F8, 0xFF00),    "Id+s#3"},              /* fmovem.x from autoincrement, static and dynamic: */
-{"fmovem",     two(0xF018, 0xD800),    two(0xF1F8, 0xFF8F),    "Ii+sDk"},              /* fmovem.x from autoincrement, static and dynamic: */
-  
-{"fmovem",     two(0xF000, 0xD000),    two(0xF1C0, 0xFF00),    "Id&s#3"},              /* fmovem.x from control,       static and dynamic: */
-{"fmovem",     two(0xF000, 0xD800),    two(0xF1C0, 0xFF8F),    "Ii&sDk"},              /* fmovem.x from control,       static and dynamic: */
-
-/* fmoveml a FP-control register */
-{"fmovem",     two(0xF000, 0xA000),    two(0xF1C0, 0xE3FF),    "Iis8@s"},
-{"fmovem",     two(0xF000, 0x8000),    two(0xF1C0, 0xE3FF),    "Ii*ss8"},
-
-/* fmoveml a FP-control reglist */
-{"fmovem",     two(0xF000, 0xA000),    two(0xF1C0, 0xE3FF),    "IiL8@s"},
-{"fmovem",     two(0xF000, 0x8000),    two(0xF2C0, 0xE3FF),    "Ii*sL8"},
-
-{"fmulb",      two(0xF000, 0x5823),    two(0xF1C0, 0xFC7F),    "Ii;bF7"},
-{"fmuld",      two(0xF000, 0x5423),    two(0xF1C0, 0xFC7F),    "Ii;FF7"},
-{"fmull",      two(0xF000, 0x4023),    two(0xF1C0, 0xFC7F),    "Ii;lF7"},
-{"fmulp",      two(0xF000, 0x4C23),    two(0xF1C0, 0xFC7F),    "Ii;pF7"},
-{"fmuls",      two(0xF000, 0x4423),    two(0xF1C0, 0xFC7F),    "Ii;fF7"},
-{"fmulw",      two(0xF000, 0x5023),    two(0xF1C0, 0xFC7F),    "Ii;wF7"},
-{"fmulx",      two(0xF000, 0x0023),    two(0xF1C0, 0xE07F),    "IiF8F7"},
-{"fmulx",      two(0xF000, 0x4823),    two(0xF1C0, 0xFC7F),    "Ii;xF7"},
-/* {"fmulx",   two(0xF000, 0x0023),    two(0xF1C0, 0xE07F),    "IiFt"}, JF */
-
-{"fnegb",      two(0xF000, 0x581A),    two(0xF1C0, 0xFC7F),    "Ii;bF7"},
-{"fnegd",      two(0xF000, 0x541A),    two(0xF1C0, 0xFC7F),    "Ii;FF7"},
-{"fnegl",      two(0xF000, 0x401A),    two(0xF1C0, 0xFC7F),    "Ii;lF7"},
-{"fnegp",      two(0xF000, 0x4C1A),    two(0xF1C0, 0xFC7F),    "Ii;pF7"},
-{"fnegs",      two(0xF000, 0x441A),    two(0xF1C0, 0xFC7F),    "Ii;fF7"},
-{"fnegw",      two(0xF000, 0x501A),    two(0xF1C0, 0xFC7F),    "Ii;wF7"},
-{"fnegx",      two(0xF000, 0x001A),    two(0xF1C0, 0xE07F),    "IiF8F7"},
-{"fnegx",      two(0xF000, 0x481A),    two(0xF1C0, 0xFC7F),    "Ii;xF7"},
-{"fnegx",      two(0xF000, 0x001A),    two(0xF1C0, 0xE07F),    "IiFt"},
-
-{"fnop",       two(0xF280, 0x0000),    two(0xFFFF, 0xFFFF),    "Ii"},
-
-{"fremb",      two(0xF000, 0x5825),    two(0xF1C0, 0xFC7F),    "Ii;bF7"},
-{"fremd",      two(0xF000, 0x5425),    two(0xF1C0, 0xFC7F),    "Ii;FF7"},
-{"freml",      two(0xF000, 0x4025),    two(0xF1C0, 0xFC7F),    "Ii;lF7"},
-{"fremp",      two(0xF000, 0x4C25),    two(0xF1C0, 0xFC7F),    "Ii;pF7"},
-{"frems",      two(0xF000, 0x4425),    two(0xF1C0, 0xFC7F),    "Ii;fF7"},
-{"fremw",      two(0xF000, 0x5025),    two(0xF1C0, 0xFC7F),    "Ii;wF7"},
-{"fremx",      two(0xF000, 0x0025),    two(0xF1C0, 0xE07F),    "IiF8F7"},
-{"fremx",      two(0xF000, 0x4825),    two(0xF1C0, 0xFC7F),    "Ii;xF7"},
-/* {"fremx",   two(0xF000, 0x0025),    two(0xF1C0, 0xE07F),    "IiFt"}, JF */
-
-{"frestore",   one(0xF140),            one(0xF1C0),            "Id&s"},
-{"frestore",   one(0xF158),            one(0xF1F8),            "Id+s"},
-{"fsave",      one(0xF100),            one(0xF1C0),            "Id&s"},
-{"fsave",      one(0xF120),            one(0xF1F8),            "Id-s"},
-
-{"fsincosb",   two(0xF000, 0x5830),    two(0xF1C0, 0xFC78),    "Ii;bF7FC"},
-{"fsincosd",   two(0xF000, 0x5430),    two(0xF1C0, 0xFC78),    "Ii;FF7FC"},
-{"fsincosl",   two(0xF000, 0x4030),    two(0xF1C0, 0xFC78),    "Ii;lF7FC"},
-{"fsincosp",   two(0xF000, 0x4C30),    two(0xF1C0, 0xFC78),    "Ii;pF7FC"},
-{"fsincoss",   two(0xF000, 0x4430),    two(0xF1C0, 0xFC78),    "Ii;fF7FC"},
-{"fsincosw",   two(0xF000, 0x5030),    two(0xF1C0, 0xFC78),    "Ii;wF7FC"},
-{"fsincosx",   two(0xF000, 0x0030),    two(0xF1C0, 0xE078),    "IiF8F7FC"},
-{"fsincosx",   two(0xF000, 0x4830),    two(0xF1C0, 0xFC78),    "Ii;xF7FC"},
-
-{"fscaleb",    two(0xF000, 0x5826),    two(0xF1C0, 0xFC7F),    "Ii;bF7"},
-{"fscaled",    two(0xF000, 0x5426),    two(0xF1C0, 0xFC7F),    "Ii;FF7"},
-{"fscalel",    two(0xF000, 0x4026),    two(0xF1C0, 0xFC7F),    "Ii;lF7"},
-{"fscalep",    two(0xF000, 0x4C26),    two(0xF1C0, 0xFC7F),    "Ii;pF7"},
-{"fscales",    two(0xF000, 0x4426),    two(0xF1C0, 0xFC7F),    "Ii;fF7"},
-{"fscalew",    two(0xF000, 0x5026),    two(0xF1C0, 0xFC7F),    "Ii;wF7"},
-{"fscalex",    two(0xF000, 0x0026),    two(0xF1C0, 0xE07F),    "IiF8F7"},
-{"fscalex",    two(0xF000, 0x4826),    two(0xF1C0, 0xFC7F),    "Ii;xF7"},
-/* {"fscalex", two(0xF000, 0x0026),    two(0xF1C0, 0xE07F),    "IiFt"}, JF */
-
-/* $ is necessary to prevent the assembler from using PC-relative.
-   If @ were used, "label: fseq label" could produce "ftrapeq",
-   because "label" became "pc@label".  */
-{"fseq",       two(0xF040, 0x0001),    two(0xF1C0, 0xFFFF),    "Ii$s"},
-{"fsf",                two(0xF040, 0x0000),    two(0xF1C0, 0xFFFF),    "Ii$s"},
-{"fsge",       two(0xF040, 0x0013),    two(0xF1C0, 0xFFFF),    "Ii$s"},
-{"fsgl",       two(0xF040, 0x0016),    two(0xF1C0, 0xFFFF),    "Ii$s"},
-{"fsgle",      two(0xF040, 0x0017),    two(0xF1C0, 0xFFFF),    "Ii$s"},
-{"fsgt",       two(0xF040, 0x0012),    two(0xF1C0, 0xFFFF),    "Ii$s"},
-{"fsle",       two(0xF040, 0x0015),    two(0xF1C0, 0xFFFF),    "Ii$s"},
-{"fslt",       two(0xF040, 0x0014),    two(0xF1C0, 0xFFFF),    "Ii$s"},
-{"fsne",       two(0xF040, 0x000E),    two(0xF1C0, 0xFFFF),    "Ii$s"},
-{"fsnge",      two(0xF040, 0x001C),    two(0xF1C0, 0xFFFF),    "Ii$s"},
-{"fsngl",      two(0xF040, 0x0019),    two(0xF1C0, 0xFFFF),    "Ii$s"},
-{"fsngle",     two(0xF040, 0x0018),    two(0xF1C0, 0xFFFF),    "Ii$s"},
-{"fsngt",      two(0xF040, 0x001D),    two(0xF1C0, 0xFFFF),    "Ii$s"},
-{"fsnle",      two(0xF040, 0x001A),    two(0xF1C0, 0xFFFF),    "Ii$s"},
-{"fsnlt",      two(0xF040, 0x001B),    two(0xF1C0, 0xFFFF),    "Ii$s"},
-{"fsoge",      two(0xF040, 0x0003),    two(0xF1C0, 0xFFFF),    "Ii$s"},
-{"fsogl",      two(0xF040, 0x0006),    two(0xF1C0, 0xFFFF),    "Ii$s"},
-{"fsogt",      two(0xF040, 0x0002),    two(0xF1C0, 0xFFFF),    "Ii$s"},
-{"fsole",      two(0xF040, 0x0005),    two(0xF1C0, 0xFFFF),    "Ii$s"},
-{"fsolt",      two(0xF040, 0x0004),    two(0xF1C0, 0xFFFF),    "Ii$s"},
-{"fsor",       two(0xF040, 0x0007),    two(0xF1C0, 0xFFFF),    "Ii$s"},
-{"fsseq",      two(0xF040, 0x0011),    two(0xF1C0, 0xFFFF),    "Ii$s"},
-{"fssf",       two(0xF040, 0x0010),    two(0xF1C0, 0xFFFF),    "Ii$s"},
-{"fssne",      two(0xF040, 0x001E),    two(0xF1C0, 0xFFFF),    "Ii$s"},
-{"fsst",       two(0xF040, 0x001F),    two(0xF1C0, 0xFFFF),    "Ii$s"},
-{"fst",                two(0xF040, 0x000F),    two(0xF1C0, 0xFFFF),    "Ii$s"},
-{"fsueq",      two(0xF040, 0x0009),    two(0xF1C0, 0xFFFF),    "Ii$s"},
-{"fsuge",      two(0xF040, 0x000B),    two(0xF1C0, 0xFFFF),    "Ii$s"},
-{"fsugt",      two(0xF040, 0x000A),    two(0xF1C0, 0xFFFF),    "Ii$s"},
-{"fsule",      two(0xF040, 0x000D),    two(0xF1C0, 0xFFFF),    "Ii$s"},
-{"fsult",      two(0xF040, 0x000C),    two(0xF1C0, 0xFFFF),    "Ii$s"},
-{"fsun",       two(0xF040, 0x0008),    two(0xF1C0, 0xFFFF),    "Ii$s"},
-
-{"fsgldivb",   two(0xF000, 0x5824),    two(0xF1C0, 0xFC7F),    "Ii;bF7"},
-{"fsgldivd",   two(0xF000, 0x5424),    two(0xF1C0, 0xFC7F),    "Ii;FF7"},
-{"fsgldivl",   two(0xF000, 0x4024),    two(0xF1C0, 0xFC7F),    "Ii;lF7"},
-{"fsgldivp",   two(0xF000, 0x4C24),    two(0xF1C0, 0xFC7F),    "Ii;pF7"},
-{"fsgldivs",   two(0xF000, 0x4424),    two(0xF1C0, 0xFC7F),    "Ii;fF7"},
-{"fsgldivw",   two(0xF000, 0x5024),    two(0xF1C0, 0xFC7F),    "Ii;wF7"},
-{"fsgldivx",   two(0xF000, 0x0024),    two(0xF1C0, 0xE07F),    "IiF8F7"},
-{"fsgldivx",   two(0xF000, 0x4824),    two(0xF1C0, 0xFC7F),    "Ii;xF7"},
-{"fsgldivx",   two(0xF000, 0x0024),    two(0xF1C0, 0xE07F),    "IiFt"},
-
-{"fsglmulb",   two(0xF000, 0x5827),    two(0xF1C0, 0xFC7F),    "Ii;bF7"},
-{"fsglmuld",   two(0xF000, 0x5427),    two(0xF1C0, 0xFC7F),    "Ii;FF7"},
-{"fsglmull",   two(0xF000, 0x4027),    two(0xF1C0, 0xFC7F),    "Ii;lF7"},
-{"fsglmulp",   two(0xF000, 0x4C27),    two(0xF1C0, 0xFC7F),    "Ii;pF7"},
-{"fsglmuls",   two(0xF000, 0x4427),    two(0xF1C0, 0xFC7F),    "Ii;fF7"},
-{"fsglmulw",   two(0xF000, 0x5027),    two(0xF1C0, 0xFC7F),    "Ii;wF7"},
-{"fsglmulx",   two(0xF000, 0x0027),    two(0xF1C0, 0xE07F),    "IiF8F7"},
-{"fsglmulx",   two(0xF000, 0x4827),    two(0xF1C0, 0xFC7F),    "Ii;xF7"},
-{"fsglmulx",   two(0xF000, 0x0027),    two(0xF1C0, 0xE07F),    "IiFt"},
-
-{"fsinb",      two(0xF000, 0x580E),    two(0xF1C0, 0xFC7F),    "Ii;bF7"},
-{"fsind",      two(0xF000, 0x540E),    two(0xF1C0, 0xFC7F),    "Ii;FF7"},
-{"fsinl",      two(0xF000, 0x400E),    two(0xF1C0, 0xFC7F),    "Ii;lF7"},
-{"fsinp",      two(0xF000, 0x4C0E),    two(0xF1C0, 0xFC7F),    "Ii;pF7"},
-{"fsins",      two(0xF000, 0x440E),    two(0xF1C0, 0xFC7F),    "Ii;fF7"},
-{"fsinw",      two(0xF000, 0x500E),    two(0xF1C0, 0xFC7F),    "Ii;wF7"},
-{"fsinx",      two(0xF000, 0x000E),    two(0xF1C0, 0xE07F),    "IiF8F7"},
-{"fsinx",      two(0xF000, 0x480E),    two(0xF1C0, 0xFC7F),    "Ii;xF7"},
-{"fsinx",      two(0xF000, 0x000E),    two(0xF1C0, 0xE07F),    "IiFt"},
-
-{"fsinhb",     two(0xF000, 0x5802),    two(0xF1C0, 0xFC7F),    "Ii;bF7"},
-{"fsinhd",     two(0xF000, 0x5402),    two(0xF1C0, 0xFC7F),    "Ii;FF7"},
-{"fsinhl",     two(0xF000, 0x4002),    two(0xF1C0, 0xFC7F),    "Ii;lF7"},
-{"fsinhp",     two(0xF000, 0x4C02),    two(0xF1C0, 0xFC7F),    "Ii;pF7"},
-{"fsinhs",     two(0xF000, 0x4402),    two(0xF1C0, 0xFC7F),    "Ii;fF7"},
-{"fsinhw",     two(0xF000, 0x5002),    two(0xF1C0, 0xFC7F),    "Ii;wF7"},
-{"fsinhx",     two(0xF000, 0x0002),    two(0xF1C0, 0xE07F),    "IiF8F7"},
-{"fsinhx",     two(0xF000, 0x4802),    two(0xF1C0, 0xFC7F),    "Ii;xF7"},
-{"fsinhx",     two(0xF000, 0x0002),    two(0xF1C0, 0xE07F),    "IiFt"},
-
-{"fsqrtb",     two(0xF000, 0x5804),    two(0xF1C0, 0xFC7F),    "Ii;bF7"},
-{"fsqrtd",     two(0xF000, 0x5404),    two(0xF1C0, 0xFC7F),    "Ii;FF7"},
-{"fsqrtl",     two(0xF000, 0x4004),    two(0xF1C0, 0xFC7F),    "Ii;lF7"},
-{"fsqrtp",     two(0xF000, 0x4C04),    two(0xF1C0, 0xFC7F),    "Ii;pF7"},
-{"fsqrts",     two(0xF000, 0x4404),    two(0xF1C0, 0xFC7F),    "Ii;fF7"},
-{"fsqrtw",     two(0xF000, 0x5004),    two(0xF1C0, 0xFC7F),    "Ii;wF7"},
-{"fsqrtx",     two(0xF000, 0x0004),    two(0xF1C0, 0xE07F),    "IiF8F7"},
-{"fsqrtx",     two(0xF000, 0x4804),    two(0xF1C0, 0xFC7F),    "Ii;xF7"},
-{"fsqrtx",     two(0xF000, 0x0004),    two(0xF1C0, 0xE07F),    "IiFt"},
-
-{"fsubb",      two(0xF000, 0x5828),    two(0xF1C0, 0xFC7F),    "Ii;bF7"},
-{"fsubd",      two(0xF000, 0x5428),    two(0xF1C0, 0xFC7F),    "Ii;FF7"},
-{"fsubl",      two(0xF000, 0x4028),    two(0xF1C0, 0xFC7F),    "Ii;lF7"},
-{"fsubp",      two(0xF000, 0x4C28),    two(0xF1C0, 0xFC7F),    "Ii;pF7"},
-{"fsubs",      two(0xF000, 0x4428),    two(0xF1C0, 0xFC7F),    "Ii;fF7"},
-{"fsubw",      two(0xF000, 0x5028),    two(0xF1C0, 0xFC7F),    "Ii;wF7"},
-{"fsubx",      two(0xF000, 0x0028),    two(0xF1C0, 0xE07F),    "IiF8F7"},
-{"fsubx",      two(0xF000, 0x4828),    two(0xF1C0, 0xFC7F),    "Ii;xF7"},
-{"fsubx",      two(0xF000, 0x0028),    two(0xF1C0, 0xE07F),    "IiFt"},
-
-{"ftanb",      two(0xF000, 0x580F),    two(0xF1C0, 0xFC7F),    "Ii;bF7"},
-{"ftand",      two(0xF000, 0x540F),    two(0xF1C0, 0xFC7F),    "Ii;FF7"},
-{"ftanl",      two(0xF000, 0x400F),    two(0xF1C0, 0xFC7F),    "Ii;lF7"},
-{"ftanp",      two(0xF000, 0x4C0F),    two(0xF1C0, 0xFC7F),    "Ii;pF7"},
-{"ftans",      two(0xF000, 0x440F),    two(0xF1C0, 0xFC7F),    "Ii;fF7"},
-{"ftanw",      two(0xF000, 0x500F),    two(0xF1C0, 0xFC7F),    "Ii;wF7"},
-{"ftanx",      two(0xF000, 0x000F),    two(0xF1C0, 0xE07F),    "IiF8F7"},
-{"ftanx",      two(0xF000, 0x480F),    two(0xF1C0, 0xFC7F),    "Ii;xF7"},
-{"ftanx",      two(0xF000, 0x000F),    two(0xF1C0, 0xE07F),    "IiFt"},
-
-{"ftanhb",     two(0xF000, 0x5809),    two(0xF1C0, 0xFC7F),    "Ii;bF7"},
-{"ftanhd",     two(0xF000, 0x5409),    two(0xF1C0, 0xFC7F),    "Ii;FF7"},
-{"ftanhl",     two(0xF000, 0x4009),    two(0xF1C0, 0xFC7F),    "Ii;lF7"},
-{"ftanhp",     two(0xF000, 0x4C09),    two(0xF1C0, 0xFC7F),    "Ii;pF7"},
-{"ftanhs",     two(0xF000, 0x4409),    two(0xF1C0, 0xFC7F),    "Ii;fF7"},
-{"ftanhw",     two(0xF000, 0x5009),    two(0xF1C0, 0xFC7F),    "Ii;wF7"},
-{"ftanhx",     two(0xF000, 0x0009),    two(0xF1C0, 0xE07F),    "IiF8F7"},
-{"ftanhx",     two(0xF000, 0x4809),    two(0xF1C0, 0xFC7F),    "Ii;xF7"},
-{"ftanhx",     two(0xF000, 0x0009),    two(0xF1C0, 0xE07F),    "IiFt"},
-
-{"ftentoxb",   two(0xF000, 0x5812),    two(0xF1C0, 0xFC7F),    "Ii;bF7"},
-{"ftentoxd",   two(0xF000, 0x5412),    two(0xF1C0, 0xFC7F),    "Ii;FF7"},
-{"ftentoxl",   two(0xF000, 0x4012),    two(0xF1C0, 0xFC7F),    "Ii;lF7"},
-{"ftentoxp",   two(0xF000, 0x4C12),    two(0xF1C0, 0xFC7F),    "Ii;pF7"},
-{"ftentoxs",   two(0xF000, 0x4412),    two(0xF1C0, 0xFC7F),    "Ii;fF7"},
-{"ftentoxw",   two(0xF000, 0x5012),    two(0xF1C0, 0xFC7F),    "Ii;wF7"},
-{"ftentoxx",   two(0xF000, 0x0012),    two(0xF1C0, 0xE07F),    "IiF8F7"},
-{"ftentoxx",   two(0xF000, 0x4812),    two(0xF1C0, 0xFC7F),    "Ii;xF7"},
-{"ftentoxx",   two(0xF000, 0x0012),    two(0xF1C0, 0xE07F),    "IiFt"},
-
-{"ftrapeq",    two(0xF07C, 0x0001),    two(0xF1FF, 0xFFFF),    "Ii"},
-{"ftrapf",     two(0xF07C, 0x0000),    two(0xF1FF, 0xFFFF),    "Ii"},
-{"ftrapge",    two(0xF07C, 0x0013),    two(0xF1FF, 0xFFFF),    "Ii"},
-{"ftrapgl",    two(0xF07C, 0x0016),    two(0xF1FF, 0xFFFF),    "Ii"},
-{"ftrapgle",   two(0xF07C, 0x0017),    two(0xF1FF, 0xFFFF),    "Ii"},
-{"ftrapgt",    two(0xF07C, 0x0012),    two(0xF1FF, 0xFFFF),    "Ii"},
-{"ftraple",    two(0xF07C, 0x0015),    two(0xF1FF, 0xFFFF),    "Ii"},
-{"ftraplt",    two(0xF07C, 0x0014),    two(0xF1FF, 0xFFFF),    "Ii"},
-{"ftrapne",    two(0xF07C, 0x000E),    two(0xF1FF, 0xFFFF),    "Ii"},
-{"ftrapnge",   two(0xF07C, 0x001C),    two(0xF1FF, 0xFFFF),    "Ii"},
-{"ftrapngl",   two(0xF07C, 0x0019),    two(0xF1FF, 0xFFFF),    "Ii"},
-{"ftrapngle",  two(0xF07C, 0x0018),    two(0xF1FF, 0xFFFF),    "Ii"},
-{"ftrapngt",   two(0xF07C, 0x001D),    two(0xF1FF, 0xFFFF),    "Ii"},
-{"ftrapnle",   two(0xF07C, 0x001A),    two(0xF1FF, 0xFFFF),    "Ii"},
-{"ftrapnlt",   two(0xF07C, 0x001B),    two(0xF1FF, 0xFFFF),    "Ii"},
-{"ftrapoge",   two(0xF07C, 0x0003),    two(0xF1FF, 0xFFFF),    "Ii"},
-{"ftrapogl",   two(0xF07C, 0x0006),    two(0xF1FF, 0xFFFF),    "Ii"},
-{"ftrapogt",   two(0xF07C, 0x0002),    two(0xF1FF, 0xFFFF),    "Ii"},
-{"ftrapole",   two(0xF07C, 0x0005),    two(0xF1FF, 0xFFFF),    "Ii"},
-{"ftrapolt",   two(0xF07C, 0x0004),    two(0xF1FF, 0xFFFF),    "Ii"},
-{"ftrapor",    two(0xF07C, 0x0007),    two(0xF1FF, 0xFFFF),    "Ii"},
-{"ftrapseq",   two(0xF07C, 0x0011),    two(0xF1FF, 0xFFFF),    "Ii"},
-{"ftrapsf",    two(0xF07C, 0x0010),    two(0xF1FF, 0xFFFF),    "Ii"},
-{"ftrapsne",   two(0xF07C, 0x001E),    two(0xF1FF, 0xFFFF),    "Ii"},
-{"ftrapst",    two(0xF07C, 0x001F),    two(0xF1FF, 0xFFFF),    "Ii"},
-{"ftrapt",     two(0xF07C, 0x000F),    two(0xF1FF, 0xFFFF),    "Ii"},
-{"ftrapueq",   two(0xF07C, 0x0009),    two(0xF1FF, 0xFFFF),    "Ii"},
-{"ftrapuge",   two(0xF07C, 0x000B),    two(0xF1FF, 0xFFFF),    "Ii"},
-{"ftrapugt",   two(0xF07C, 0x000A),    two(0xF1FF, 0xFFFF),    "Ii"},
-{"ftrapule",   two(0xF07C, 0x000D),    two(0xF1FF, 0xFFFF),    "Ii"},
-{"ftrapult",   two(0xF07C, 0x000C),    two(0xF1FF, 0xFFFF),    "Ii"},
-{"ftrapun",    two(0xF07C, 0x0008),    two(0xF1FF, 0xFFFF),    "Ii"},
-        
-{"ftrapeqw",   two(0xF07A, 0x0001),    two(0xF1FF, 0xFFFF),    "Ii^w"},
-{"ftrapfw",    two(0xF07A, 0x0000),    two(0xF1FF, 0xFFFF),    "Ii^w"},
-{"ftrapgew",   two(0xF07A, 0x0013),    two(0xF1FF, 0xFFFF),    "Ii^w"},
-{"ftrapglw",   two(0xF07A, 0x0016),    two(0xF1FF, 0xFFFF),    "Ii^w"},
-{"ftrapglew",  two(0xF07A, 0x0017),    two(0xF1FF, 0xFFFF),    "Ii^w"},
-{"ftrapgtw",   two(0xF07A, 0x0012),    two(0xF1FF, 0xFFFF),    "Ii^w"},
-{"ftraplew",   two(0xF07A, 0x0015),    two(0xF1FF, 0xFFFF),    "Ii^w"},
-{"ftrapltw",   two(0xF07A, 0x0014),    two(0xF1FF, 0xFFFF),    "Ii^w"},
-{"ftrapnew",   two(0xF07A, 0x000E),    two(0xF1FF, 0xFFFF),    "Ii^w"},
-{"ftrapngew",  two(0xF07A, 0x001C),    two(0xF1FF, 0xFFFF),    "Ii^w"},
-{"ftrapnglw",  two(0xF07A, 0x0019),    two(0xF1FF, 0xFFFF),    "Ii^w"},
-{"ftrapnglew", two(0xF07A, 0x0018),    two(0xF1FF, 0xFFFF),    "Ii^w"},
-{"ftrapngtw",  two(0xF07A, 0x001D),    two(0xF1FF, 0xFFFF),    "Ii^w"},
-{"ftrapnlew",  two(0xF07A, 0x001A),    two(0xF1FF, 0xFFFF),    "Ii^w"},
-{"ftrapnltw",  two(0xF07A, 0x001B),    two(0xF1FF, 0xFFFF),    "Ii^w"},
-{"ftrapogew",  two(0xF07A, 0x0003),    two(0xF1FF, 0xFFFF),    "Ii^w"},
-{"ftrapoglw",  two(0xF07A, 0x0006),    two(0xF1FF, 0xFFFF),    "Ii^w"},
-{"ftrapogtw",  two(0xF07A, 0x0002),    two(0xF1FF, 0xFFFF),    "Ii^w"},
-{"ftrapolew",  two(0xF07A, 0x0005),    two(0xF1FF, 0xFFFF),    "Ii^w"},
-{"ftrapoltw",  two(0xF07A, 0x0004),    two(0xF1FF, 0xFFFF),    "Ii^w"},
-{"ftraporw",   two(0xF07A, 0x0007),    two(0xF1FF, 0xFFFF),    "Ii^w"},
-{"ftrapseqw",  two(0xF07A, 0x0011),    two(0xF1FF, 0xFFFF),    "Ii^w"},
-{"ftrapsfw",   two(0xF07A, 0x0010),    two(0xF1FF, 0xFFFF),    "Ii^w"},
-{"ftrapsnew",  two(0xF07A, 0x001E),    two(0xF1FF, 0xFFFF),    "Ii^w"},
-{"ftrapstw",   two(0xF07A, 0x001F),    two(0xF1FF, 0xFFFF),    "Ii^w"},
-{"ftraptw",    two(0xF07A, 0x000F),    two(0xF1FF, 0xFFFF),    "Ii^w"},
-{"ftrapueqw",  two(0xF07A, 0x0009),    two(0xF1FF, 0xFFFF),    "Ii^w"},
-{"ftrapugew",  two(0xF07A, 0x000B),    two(0xF1FF, 0xFFFF),    "Ii^w"},
-{"ftrapugtw",  two(0xF07A, 0x000A),    two(0xF1FF, 0xFFFF),    "Ii^w"},
-{"ftrapulew",  two(0xF07A, 0x000D),    two(0xF1FF, 0xFFFF),    "Ii^w"},
-{"ftrapultw",  two(0xF07A, 0x000C),    two(0xF1FF, 0xFFFF),    "Ii^w"},
-{"ftrapunw",   two(0xF07A, 0x0008),    two(0xF1FF, 0xFFFF),    "Ii^w"},
-
-{"ftrapeql",   two(0xF07B, 0x0001),    two(0xF1FF, 0xFFFF),    "Ii^l"},
-{"ftrapfl",    two(0xF07B, 0x0000),    two(0xF1FF, 0xFFFF),    "Ii^l"},
-{"ftrapgel",   two(0xF07B, 0x0013),    two(0xF1FF, 0xFFFF),    "Ii^l"},
-{"ftrapgll",   two(0xF07B, 0x0016),    two(0xF1FF, 0xFFFF),    "Ii^l"},
-{"ftrapglel",  two(0xF07B, 0x0017),    two(0xF1FF, 0xFFFF),    "Ii^l"},
-{"ftrapgtl",   two(0xF07B, 0x0012),    two(0xF1FF, 0xFFFF),    "Ii^l"},
-{"ftraplel",   two(0xF07B, 0x0015),    two(0xF1FF, 0xFFFF),    "Ii^l"},
-{"ftrapltl",   two(0xF07B, 0x0014),    two(0xF1FF, 0xFFFF),    "Ii^l"},
-{"ftrapnel",   two(0xF07B, 0x000E),    two(0xF1FF, 0xFFFF),    "Ii^l"},
-{"ftrapngel",  two(0xF07B, 0x001C),    two(0xF1FF, 0xFFFF),    "Ii^l"},
-{"ftrapngll",  two(0xF07B, 0x0019),    two(0xF1FF, 0xFFFF),    "Ii^l"},
-{"ftrapnglel", two(0xF07B, 0x0018),    two(0xF1FF, 0xFFFF),    "Ii^l"},
-{"ftrapngtl",  two(0xF07B, 0x001D),    two(0xF1FF, 0xFFFF),    "Ii^l"},
-{"ftrapnlel",  two(0xF07B, 0x001A),    two(0xF1FF, 0xFFFF),    "Ii^l"},
-{"ftrapnltl",  two(0xF07B, 0x001B),    two(0xF1FF, 0xFFFF),    "Ii^l"},
-{"ftrapogel",  two(0xF07B, 0x0003),    two(0xF1FF, 0xFFFF),    "Ii^l"},
-{"ftrapogll",  two(0xF07B, 0x0006),    two(0xF1FF, 0xFFFF),    "Ii^l"},
-{"ftrapogtl",  two(0xF07B, 0x0002),    two(0xF1FF, 0xFFFF),    "Ii^l"},
-{"ftrapolel",  two(0xF07B, 0x0005),    two(0xF1FF, 0xFFFF),    "Ii^l"},
-{"ftrapoltl",  two(0xF07B, 0x0004),    two(0xF1FF, 0xFFFF),    "Ii^l"},
-{"ftraporl",   two(0xF07B, 0x0007),    two(0xF1FF, 0xFFFF),    "Ii^l"},
-{"ftrapseql",  two(0xF07B, 0x0011),    two(0xF1FF, 0xFFFF),    "Ii^l"},
-{"ftrapsfl",   two(0xF07B, 0x0010),    two(0xF1FF, 0xFFFF),    "Ii^l"},
-{"ftrapsnel",  two(0xF07B, 0x001E),    two(0xF1FF, 0xFFFF),    "Ii^l"},
-{"ftrapstl",   two(0xF07B, 0x001F),    two(0xF1FF, 0xFFFF),    "Ii^l"},
-{"ftraptl",    two(0xF07B, 0x000F),    two(0xF1FF, 0xFFFF),    "Ii^l"},
-{"ftrapueql",  two(0xF07B, 0x0009),    two(0xF1FF, 0xFFFF),    "Ii^l"},
-{"ftrapugel",  two(0xF07B, 0x000B),    two(0xF1FF, 0xFFFF),    "Ii^l"},
-{"ftrapugtl",  two(0xF07B, 0x000A),    two(0xF1FF, 0xFFFF),    "Ii^l"},
-{"ftrapulel",  two(0xF07B, 0x000D),    two(0xF1FF, 0xFFFF),    "Ii^l"},
-{"ftrapultl",  two(0xF07B, 0x000C),    two(0xF1FF, 0xFFFF),    "Ii^l"},
-{"ftrapunl",   two(0xF07B, 0x0008),    two(0xF1FF, 0xFFFF),    "Ii^l"},
-
-{"ftstb",      two(0xF000, 0x583A),    two(0xF1C0, 0xFC7F),    "Ii;b"},
-{"ftstd",      two(0xF000, 0x543A),    two(0xF1C0, 0xFC7F),    "Ii;F"},
-{"ftstl",      two(0xF000, 0x403A),    two(0xF1C0, 0xFC7F),    "Ii;l"},
-{"ftstp",      two(0xF000, 0x4C3A),    two(0xF1C0, 0xFC7F),    "Ii;p"},
-{"ftsts",      two(0xF000, 0x443A),    two(0xF1C0, 0xFC7F),    "Ii;f"},
-{"ftstw",      two(0xF000, 0x503A),    two(0xF1C0, 0xFC7F),    "Ii;w"},
-{"ftstx",      two(0xF000, 0x003A),    two(0xF1C0, 0xE07F),    "IiF8"},
-{"ftstx",      two(0xF000, 0x483A),    two(0xF1C0, 0xFC7F),    "Ii;x"},
-
-{"ftwotoxb",   two(0xF000, 0x5811),    two(0xF1C0, 0xFC7F),    "Ii;bF7"},
-{"ftwotoxd",   two(0xF000, 0x5411),    two(0xF1C0, 0xFC7F),    "Ii;FF7"},
-{"ftwotoxl",   two(0xF000, 0x4011),    two(0xF1C0, 0xFC7F),    "Ii;lF7"},
-{"ftwotoxp",   two(0xF000, 0x4C11),    two(0xF1C0, 0xFC7F),    "Ii;pF7"},
-{"ftwotoxs",   two(0xF000, 0x4411),    two(0xF1C0, 0xFC7F),    "Ii;fF7"},
-{"ftwotoxw",   two(0xF000, 0x5011),    two(0xF1C0, 0xFC7F),    "Ii;wF7"},
-{"ftwotoxx",   two(0xF000, 0x0011),    two(0xF1C0, 0xE07F),    "IiF8F7"},
-{"ftwotoxx",   two(0xF000, 0x4811),    two(0xF1C0, 0xFC7F),    "Ii;xF7"},
-{"ftwotoxx",   two(0xF000, 0x0011),    two(0xF1C0, 0xE07F),    "IiFt"},
-
-
-{"fjeq",       one(0xF081),            one(0xF1FF),            "IdBc"},
-{"fjf",                one(0xF080),            one(0xF1FF),            "IdBc"},
-{"fjge",       one(0xF093),            one(0xF1FF),            "IdBc"},
-{"fjgl",       one(0xF096),            one(0xF1FF),            "IdBc"},
-{"fjgle",      one(0xF097),            one(0xF1FF),            "IdBc"},
-{"fjgt",       one(0xF092),            one(0xF1FF),            "IdBc"},
-{"fjle",       one(0xF095),            one(0xF1FF),            "IdBc"},
-{"fjlt",       one(0xF094),            one(0xF1FF),            "IdBc"},
-{"fjne",       one(0xF08E),            one(0xF1FF),            "IdBc"},
-{"fjnge",      one(0xF09C),            one(0xF1FF),            "IdBc"},
-{"fjngl",      one(0xF099),            one(0xF1FF),            "IdBc"},
-{"fjngle",     one(0xF098),            one(0xF1FF),            "IdBc"},
-{"fjngt",      one(0xF09D),            one(0xF1FF),            "IdBc"},
-{"fjnle",      one(0xF09A),            one(0xF1FF),            "IdBc"},
-{"fjnlt",      one(0xF09B),            one(0xF1FF),            "IdBc"},
-{"fjoge",      one(0xF083),            one(0xF1FF),            "IdBc"},
-{"fjogl",      one(0xF086),            one(0xF1FF),            "IdBc"},
-{"fjogt",      one(0xF082),            one(0xF1FF),            "IdBc"},
-{"fjole",      one(0xF085),            one(0xF1FF),            "IdBc"},
-{"fjolt",      one(0xF084),            one(0xF1FF),            "IdBc"},
-{"fjor",       one(0xF087),            one(0xF1FF),            "IdBc"},
-{"fjseq",      one(0xF091),            one(0xF1FF),            "IdBc"},
-{"fjsf",       one(0xF090),            one(0xF1FF),            "IdBc"},
-{"fjsne",      one(0xF09E),            one(0xF1FF),            "IdBc"},
-{"fjst",       one(0xF09F),            one(0xF1FF),            "IdBc"},
-{"fjt",                one(0xF08F),            one(0xF1FF),            "IdBc"},
-{"fjueq",      one(0xF089),            one(0xF1FF),            "IdBc"},
-{"fjuge",      one(0xF08B),            one(0xF1FF),            "IdBc"},
-{"fjugt",      one(0xF08A),            one(0xF1FF),            "IdBc"},
-{"fjule",      one(0xF08D),            one(0xF1FF),            "IdBc"},
-{"fjult",      one(0xF08C),            one(0xF1FF),            "IdBc"},
-{"fjun",       one(0xF088),            one(0xF1FF),            "IdBc"},
-
-/* The assembler will ignore attempts to force a short offset */
-
-{"bhis",       one(0061000),           one(0177400),           "Bg"},
-{"blss",       one(0061400),           one(0177400),           "Bg"},
-{"bccs",       one(0062000),           one(0177400),           "Bg"},
-{"bcss",       one(0062400),           one(0177400),           "Bg"},
-{"bnes",       one(0063000),           one(0177400),           "Bg"},
-{"beqs",       one(0063400),           one(0177400),           "Bg"},
-{"bvcs",       one(0064000),           one(0177400),           "Bg"},
-{"bvss",       one(0064400),           one(0177400),           "Bg"},
-{"bpls",       one(0065000),           one(0177400),           "Bg"},
-{"bmis",       one(0065400),           one(0177400),           "Bg"},
-{"bges",       one(0066000),           one(0177400),           "Bg"},
-{"blts",       one(0066400),           one(0177400),           "Bg"},
-{"bgts",       one(0067000),           one(0177400),           "Bg"},
-{"bles",       one(0067400),           one(0177400),           "Bg"},
-
-/* Alternate mnemonics for SUN */
-
-{"jbsr",       one(0060400),           one(0177400),           "Bg"},
-{"jbsr",       one(0047200),           one(0177700),           "!s"},
-{"jra",                one(0060000),           one(0177400),           "Bg"},
-{"jra",                one(0047300),           one(0177700),           "!s"},
-  
-{"jhi",                one(0061000),           one(0177400),           "Bg"},
-{"jls",                one(0061400),           one(0177400),           "Bg"},
-{"jcc",                one(0062000),           one(0177400),           "Bg"},
-{"jcs",                one(0062400),           one(0177400),           "Bg"},
-{"jne",                one(0063000),           one(0177400),           "Bg"},
-{"jeq",                one(0063400),           one(0177400),           "Bg"},
-{"jvc",                one(0064000),           one(0177400),           "Bg"},
-{"jvs",                one(0064400),           one(0177400),           "Bg"},
-{"jpl",                one(0065000),           one(0177400),           "Bg"},
-{"jmi",                one(0065400),           one(0177400),           "Bg"},
-{"jge",                one(0066000),           one(0177400),           "Bg"},
-{"jlt",                one(0066400),           one(0177400),           "Bg"},
-{"jgt",                one(0067000),           one(0177400),           "Bg"},
-{"jle",                one(0067400),           one(0177400),           "Bg"},
-
-/* Short offsets are ignored */
-
-{"jbsrs",      one(0060400),           one(0177400),           "Bg"},
-{"jras",       one(0060000),           one(0177400),           "Bg"},
-{"jhis",       one(0061000),           one(0177400),           "Bg"},
-{"jlss",       one(0061400),           one(0177400),           "Bg"},
-{"jccs",       one(0062000),           one(0177400),           "Bg"},
-{"jcss",       one(0062400),           one(0177400),           "Bg"},
-{"jnes",       one(0063000),           one(0177400),           "Bg"},
-{"jeqs",       one(0063400),           one(0177400),           "Bg"},
-{"jvcs",       one(0064000),           one(0177400),           "Bg"},
-{"jvss",       one(0064400),           one(0177400),           "Bg"},
-{"jpls",       one(0065000),           one(0177400),           "Bg"},
-{"jmis",       one(0065400),           one(0177400),           "Bg"},
-{"jges",       one(0066000),           one(0177400),           "Bg"},
-{"jlts",       one(0066400),           one(0177400),           "Bg"},
-{"jgts",       one(0067000),           one(0177400),           "Bg"},
-{"jles",       one(0067400),           one(0177400),           "Bg"},
-
-{"movql",      one(0070000),           one(0170400),           "MsDd"},
-{"moveql",     one(0070000),           one(0170400),           "MsDd"},
-{"moval",      one(0020100),           one(0170700),           "*lAd"},
-{"movaw",      one(0030100),           one(0170700),           "*wAd"},
-{"movb",       one(0010000),           one(0170000),           ";b$d"},        /* mov */
-{"movl",       one(0070000),           one(0170400),           "MsDd"},        /* movq written as mov */
-{"movl",       one(0020000),           one(0170000),           "*l$d"},
-{"movl",       one(0020100),           one(0170700),           "*lAd"},
-{"movl",       one(0047140),           one(0177770),           "AsUd"},        /* mov to USP */
-{"movl",       one(0047150),           one(0177770),           "UdAs"},        /* mov from USP */
-{"movc",       one(0047173),           one(0177777),           "R1Jj"},
-{"movc",       one(0047173),           one(0177777),           "R1#j"},
-{"movc",       one(0047172),           one(0177777),           "JjR1"},
-{"movc",       one(0047172),           one(0177777),           "#jR1"},
-{"movml",      one(0044300),           one(0177700),           "#w&s"},        /* movm reg to mem. */
-{"movml",      one(0044340),           one(0177770),           "#w-s"},        /* movm reg to autodecrement. */
-{"movml",      one(0046300),           one(0177700),           "!s#w"},        /* movm mem to reg. */
-{"movml",      one(0046330),           one(0177770),           "+s#w"},        /* movm autoinc to reg. */
-{"movml",      one(0044300),           one(0177700),           "Lw&s"},        /* movm reg to mem. */
-{"movml",      one(0044340),           one(0177770),           "lw-s"},        /* movm reg to autodecrement. */
-{"movml",      one(0046300),           one(0177700),           "!sLw"},        /* movm mem to reg. */
-{"movml",      one(0046330),           one(0177770),           "+sLw"},        /* movm autoinc to reg. */
-{"movmw",      one(0044200),           one(0177700),           "#w&s"},        /* movm reg to mem. */
-{"movmw",      one(0044240),           one(0177770),           "#w-s"},        /* movm reg to autodecrement. */
-{"movmw",      one(0046200),           one(0177700),           "!s#w"},        /* movm mem to reg. */
-{"movmw",      one(0046230),           one(0177770),           "+s#w"},        /* movm autoinc to reg. */
-{"movmw",      one(0044200),           one(0177700),           "Lw&s"},        /* movm reg to mem. */
-{"movmw",      one(0044240),           one(0177770),           "lw-s"},        /* movm reg to autodecrement. */
-{"movmw",      one(0046200),           one(0177700),           "!sLw"},        /* movm mem to reg. */
-{"movmw",      one(0046230),           one(0177770),           "+sLw"},        /* movm autoinc to reg. */
-{"movpl",      one(0000510),           one(0170770),           "dsDd"},        /* memory to register */
-{"movpl",      one(0000710),           one(0170770),           "Ddds"},        /* register to memory */
-{"movpw",      one(0000410),           one(0170770),           "dsDd"},        /* memory to register */
-{"movpw",      one(0000610),           one(0170770),           "Ddds"},        /* register to memory */
-{"movq",       one(0070000),           one(0170400),           "MsDd"},
-{"movw",       one(0030000),           one(0170000),           "*w$d"},
-{"movw",       one(0030100),           one(0170700),           "*wAd"},        /* mova,        written as mov */
-{"movw",       one(0040300),           one(0177700),           "Ss$s"},        /* Move from sr */
-{"movw",       one(0041300),           one(0177700),           "Cs$s"},        /* Move from ccr */
-{"movw",       one(0042300),           one(0177700),           ";wCd"},        /* mov to ccr */
-{"movw",       one(0043300),           one(0177700),           ";wSd"},        /* mov to sr */
-
-{"movsb",      two(0007000, 0),        two(0177700, 07777),    "~sR1"},
-{"movsb",      two(0007000, 04000),    two(0177700, 07777),    "R1~s"},
-{"movsl",      two(0007200, 0),        two(0177700, 07777),    "~sR1"},
-{"movsl",      two(0007200, 04000),    two(0177700, 07777),    "R1~s"},
-{"movsw",      two(0007100, 0),        two(0177700, 07777),    "~sR1"},
-{"movsw",      two(0007100, 04000),    two(0177700, 07777),    "R1~s"},
-
-#ifdef m68851
- /* name */    /* opcode */            /* match */             /* args */
-
-{"pbac",       one(0xf0c7),            one(0xffbf),            "Bc"},
-{"pbacw",      one(0xf087),            one(0xffbf),            "Bc"},
-{"pbas",       one(0xf0c6),            one(0xffbf),            "Bc"},
-{"pbasw",      one(0xf086),            one(0xffbf),            "Bc"},
-{"pbbc",       one(0xf0c1),            one(0xffbf),            "Bc"},
-{"pbbcw",      one(0xf081),            one(0xffbf),            "Bc"},
-{"pbbs",       one(0xf0c0),            one(0xffbf),            "Bc"},
-{"pbbsw",      one(0xf080),            one(0xffbf),            "Bc"},
-{"pbcc",       one(0xf0cf),            one(0xffbf),            "Bc"},
-{"pbccw",      one(0xf08f),            one(0xffbf),            "Bc"},
-{"pbcs",       one(0xf0ce),            one(0xffbf),            "Bc"},
-{"pbcsw",      one(0xf08e),            one(0xffbf),            "Bc"},
-{"pbgc",       one(0xf0cd),            one(0xffbf),            "Bc"},
-{"pbgcw",      one(0xf08d),            one(0xffbf),            "Bc"},
-{"pbgs",       one(0xf0cc),            one(0xffbf),            "Bc"},
-{"pbgsw",      one(0xf08c),            one(0xffbf),            "Bc"},
-{"pbic",       one(0xf0cb),            one(0xffbf),            "Bc"},
-{"pbicw",      one(0xf08b),            one(0xffbf),            "Bc"},
-{"pbis",       one(0xf0ca),            one(0xffbf),            "Bc"},
-{"pbisw",      one(0xf08a),            one(0xffbf),            "Bc"},
-{"pblc",       one(0xf0c3),            one(0xffbf),            "Bc"},
-{"pblcw",      one(0xf083),            one(0xffbf),            "Bc"},
-{"pbls",       one(0xf0c2),            one(0xffbf),            "Bc"},
-{"pblsw",      one(0xf082),            one(0xffbf),            "Bc"},
-{"pbsc",       one(0xf0c5),            one(0xffbf),            "Bc"},
-{"pbscw",      one(0xf085),            one(0xffbf),            "Bc"},
-{"pbss",       one(0xf0c4),            one(0xffbf),            "Bc"},
-{"pbssw",      one(0xf084),            one(0xffbf),            "Bc"},
-{"pbwc",       one(0xf0c9),            one(0xffbf),            "Bc"},
-{"pbwcw",      one(0xf089),            one(0xffbf),            "Bc"},
-{"pbws",       one(0xf0c8),            one(0xffbf),            "Bc"},
-{"pbwsw",      one(0xf088),            one(0xffbf),            "Bc"},
-
-
-{"pdbac",      two(0xf048, 0x0007),    two(0xfff8, 0xffff),    "DsBw"},
-{"pdbas",      two(0xf048, 0x0006),    two(0xfff8, 0xffff),    "DsBw"},
-{"pdbbc",      two(0xf048, 0x0001),    two(0xfff8, 0xffff),    "DsBw"},
-{"pdbbs",      two(0xf048, 0x0000),    two(0xfff8, 0xffff),    "DsBw"},
-{"pdbcc",      two(0xf048, 0x000f),    two(0xfff8, 0xffff),    "DsBw"},
-{"pdbcs",      two(0xf048, 0x000e),    two(0xfff8, 0xffff),    "DsBw"},
-{"pdbgc",      two(0xf048, 0x000d),    two(0xfff8, 0xffff),    "DsBw"},
-{"pdbgs",      two(0xf048, 0x000c),    two(0xfff8, 0xffff),    "DsBw"},
-{"pdbic",      two(0xf048, 0x000b),    two(0xfff8, 0xffff),    "DsBw"},
-{"pdbis",      two(0xf048, 0x000a),    two(0xfff8, 0xffff),    "DsBw"},
-{"pdblc",      two(0xf048, 0x0003),    two(0xfff8, 0xffff),    "DsBw"},
-{"pdbls",      two(0xf048, 0x0002),    two(0xfff8, 0xffff),    "DsBw"},
-{"pdbsc",      two(0xf048, 0x0005),    two(0xfff8, 0xffff),    "DsBw"},
-{"pdbss",      two(0xf048, 0x0004),    two(0xfff8, 0xffff),    "DsBw"},
-{"pdbwc",      two(0xf048, 0x0009),    two(0xfff8, 0xffff),    "DsBw"},
-{"pdbws",      two(0xf048, 0x0008),    two(0xfff8, 0xffff),    "DsBw"},
-
-{"pflusha",    two(0xf000, 0x2400),    two(0xffff, 0xffff),    "" },
-
-{"pflush",     two(0xf000, 0x3010),    two(0xffc0, 0xfe10),    "T3T9" },
-{"pflush",     two(0xf000, 0x3810),    two(0xffc0, 0xfe10),    "T3T9&s" },
-{"pflush",     two(0xf000, 0x3008),    two(0xffc0, 0xfe18),    "D3T9" },
-{"pflush",     two(0xf000, 0x3808),    two(0xffc0, 0xfe18),    "D3T9&s" },
-{"pflush",     two(0xf000, 0x3000),    two(0xffc0, 0xfe1e),    "f3T9" },
-{"pflush",     two(0xf000, 0x3800),    two(0xffc0, 0xfe1e),    "f3T9&s" },
-
-{"pflushs",    two(0xf000, 0x3410),    two(0xfff8, 0xfe10),    "T3T9" },
-{"pflushs",    two(0xf000, 0x3c00),    two(0xfff8, 0xfe00),    "T3T9&s" },
-{"pflushs",    two(0xf000, 0x3408),    two(0xfff8, 0xfe18),    "D3T9" },
-{"pflushs",    two(0xf000, 0x3c08),    two(0xfff8, 0xfe18),    "D3T9&s" },
-{"pflushs",    two(0xf000, 0x3400),    two(0xfff8, 0xfe1e),    "f3T9" },
-{"pflushs",    two(0xf000, 0x3c00),    two(0xfff8, 0xfe1e),    "f3T9&s"},
-
-{"pflushr",    two(0xf000, 0xa000),    two(0xffc0, 0xffff),    "|s" },
-
-{"ploadr",     two(0xf000, 0x2210),    two(0xffc0, 0xfff0),    "T3&s" },
-{"ploadr",     two(0xf000, 0x2208),    two(0xffc0, 0xfff8),    "D3&s" },
-{"ploadr",     two(0xf000, 0x2200),    two(0xffc0, 0xfffe),    "f3&s" },
-{"ploadw",     two(0xf000, 0x2010),    two(0xffc0, 0xfff0),    "T3&s" },
-{"ploadw",     two(0xf000, 0x2008),    two(0xffc0, 0xfff8),    "D3&s" },
-{"ploadw",     two(0xf000, 0x2000),    two(0xffc0, 0xfffe),    "f3&s" },
-
-/* TC, CRP, DRP, SRP, CAL, VAL, SCC, AC */
-{"pmove",      two(0xf000, 0x4000),    two(0xffc0, 0xe3ff),    "*sP8" },
-{"pmove",      two(0xf000, 0x4200),    two(0xffc0, 0xe3ff),    "P8%s" },
-{"pmove",      two(0xf000, 0x4000),    two(0xffc0, 0xe3ff),    "|sW8" },
-{"pmove",      two(0xf000, 0x4200),    two(0xffc0, 0xe3ff),    "W8~s" },
-
-/* BADx, BACx */
-{"pmove",      two(0xf000, 0x6200),    two(0xffc0, 0xe3e3),    "*sX3" },
-{"pmove",      two(0xf000, 0x6000),    two(0xffc0, 0xe3e3),    "X3%s" },
-
-/* PSR, PCSR */
-/* {"pmove",   two(0xf000, 0x6100),    two(oxffc0, oxffff),    "*sZ8" }, */
-{"pmove",      two(0xf000, 0x6000),    two(0xffc0, 0xffff),    "*sY8" },
-{"pmove",      two(0xf000, 0x6200),    two(0xffc0, 0xffff),    "Y8%s" },
-{"pmove",      two(0xf000, 0x6600),    two(0xffc0, 0xffff),    "Z8%s" },
-
-{"prestore",   one(0xf140),            one(0xffc0),            "&s"},
-{"prestore",   one(0xf158),            one(0xfff8),            "+s"},
-{"psave",      one(0xf100),            one(0xffc0),            "&s"},
-{"psave",      one(0xf100),            one(0xffc0),            "+s"},
-
-{"psac",       two(0xf040, 0x0007),    two(0xffc0, 0xffff),    "@s"},
-{"psas",       two(0xf040, 0x0006),    two(0xffc0, 0xffff),    "@s"},
-{"psbc",       two(0xf040, 0x0001),    two(0xffc0, 0xffff),    "@s"},
-{"psbs",       two(0xf040, 0x0000),    two(0xffc0, 0xffff),    "@s"},
-{"pscc",       two(0xf040, 0x000f),    two(0xffc0, 0xffff),    "@s"},
-{"pscs",       two(0xf040, 0x000e),    two(0xffc0, 0xffff),    "@s"},
-{"psgc",       two(0xf040, 0x000d),    two(0xffc0, 0xffff),    "@s"},
-{"psgs",       two(0xf040, 0x000c),    two(0xffc0, 0xffff),    "@s"},
-{"psic",       two(0xf040, 0x000b),    two(0xffc0, 0xffff),    "@s"},
-{"psis",       two(0xf040, 0x000a),    two(0xffc0, 0xffff),    "@s"},
-{"pslc",       two(0xf040, 0x0003),    two(0xffc0, 0xffff),    "@s"},
-{"psls",       two(0xf040, 0x0002),    two(0xffc0, 0xffff),    "@s"},
-{"pssc",       two(0xf040, 0x0005),    two(0xffc0, 0xffff),    "@s"},
-{"psss",       two(0xf040, 0x0004),    two(0xffc0, 0xffff),    "@s"},
-{"pswc",       two(0xf040, 0x0009),    two(0xffc0, 0xffff),    "@s"},
-{"psws",       two(0xf040, 0x0008),    two(0xffc0, 0xffff),    "@s"},
-
-{"ptestr",     two(0xf000, 0x8210),    two(0xffc0, 0xe3f0),    "T3&sQ8" },
-{"ptestr",     two(0xf000, 0x8310),    two(0xffc0, 0xe310),    "T3&sQ8A9" },
-{"ptestr",     two(0xf000, 0x8208),    two(0xffc0, 0xe3f8),    "D3&sQ8" },
-{"ptestr",     two(0xf000, 0x8308),    two(0xffc0, 0xe318),    "D3&sQ8A9" },
-{"ptestr",     two(0xf000, 0x8200),    two(0xffc0, 0xe3fe),    "f3&sQ8" },
-{"ptestr",     two(0xf000, 0x8300),    two(0xffc0, 0xe31e),    "f3&sQ8A9" },
-
-{"ptestw",     two(0xf000, 0x8010),    two(0xffc0, 0xe3f0),    "T3&sQ8" },
-{"ptestw",     two(0xf000, 0x8110),    two(0xffc0, 0xe310),    "T3&sQ8A9" },
-{"ptestw",     two(0xf000, 0x8008),    two(0xffc0, 0xe3f8),    "D3&sQ8" },
-{"ptestw",     two(0xf000, 0x8108),    two(0xffc0, 0xe318),    "D3&sQ8A9" },
-{"ptestw",     two(0xf000, 0x8000),    two(0xffc0, 0xe3fe),    "f3&sQ8" },
-{"ptestw",     two(0xf000, 0x8100),    two(0xffc0, 0xe31e),    "f3&sQ8A9" },
-
-{"ptrapacw",   two(0xf07a, 0x0007),    two(0xffff, 0xffff),    "#w"},
-{"ptrapacl",   two(0xf07b, 0x0007),    two(0xffff, 0xffff),    "#l"},
-{"ptrapac",    two(0xf07c, 0x0007),    two(0xffff, 0xffff),    ""},
-
-{"ptrapasw",   two(0xf07a, 0x0006),    two(0xffff, 0xffff),    "#w"},
-{"ptrapasl",   two(0xf07b, 0x0006),    two(0xffff, 0xffff),    "#l"},
-{"ptrapas",    two(0xf07c, 0x0006),    two(0xffff, 0xffff),    ""},
-
-{"ptrapbcw",   two(0xf07a, 0x0001),    two(0xffff, 0xffff),    "#w"},
-{"ptrapbcl",   two(0xf07b, 0x0001),    two(0xffff, 0xffff),    "#l"},
-{"ptrapbc",    two(0xf07c, 0x0001),    two(0xffff, 0xffff),    ""},
-
-{"ptrapbsw",   two(0xf07a, 0x0000),    two(0xffff, 0xffff),    "#w"},
-{"ptrapbsl",   two(0xf07b, 0x0000),    two(0xffff, 0xffff),    "#l"},
-{"ptrapbs",    two(0xf07c, 0x0000),    two(0xffff, 0xffff),    ""},
-
-{"ptrapccw",   two(0xf07a, 0x000f),    two(0xffff, 0xffff),    "#w"},
-{"ptrapccl",   two(0xf07b, 0x000f),    two(0xffff, 0xffff),    "#l"},
-{"ptrapcc",    two(0xf07c, 0x000f),    two(0xffff, 0xffff),    ""},
-
-{"ptrapcsw",   two(0xf07a, 0x000e),    two(0xffff, 0xffff),    "#w"},
-{"ptrapcsl",   two(0xf07b, 0x000e),    two(0xffff, 0xffff),    "#l"},
-{"ptrapcs",    two(0xf07c, 0x000e),    two(0xffff, 0xffff),    ""},
-
-{"ptrapgcw",   two(0xf07a, 0x000d),    two(0xffff, 0xffff),    "#w"},
-{"ptrapgcl",   two(0xf07b, 0x000d),    two(0xffff, 0xffff),    "#l"},
-{"ptrapgc",    two(0xf07c, 0x000d),    two(0xffff, 0xffff),    ""},
-
-{"ptrapgsw",   two(0xf07a, 0x000c),    two(0xffff, 0xffff),    "#w"},
-{"ptrapgsl",   two(0xf07b, 0x000c),    two(0xffff, 0xffff),    "#l"},
-{"ptrapgs",    two(0xf07c, 0x000c),    two(0xffff, 0xffff),    ""},
-
-{"ptrapicw",   two(0xf07a, 0x000b),    two(0xffff, 0xffff),    "#w"},
-{"ptrapicl",   two(0xf07b, 0x000b),    two(0xffff, 0xffff),    "#l"},
-{"ptrapic",    two(0xf07c, 0x000b),    two(0xffff, 0xffff),    ""},
-
-{"ptrapisw",   two(0xf07a, 0x000a),    two(0xffff, 0xffff),    "#w"},
-{"ptrapisl",   two(0xf07b, 0x000a),    two(0xffff, 0xffff),    "#l"},
-{"ptrapis",    two(0xf07c, 0x000a),    two(0xffff, 0xffff),    ""},
-
-{"ptraplcw",   two(0xf07a, 0x0003),    two(0xffff, 0xffff),    "#w"},
-{"ptraplcl",   two(0xf07b, 0x0003),    two(0xffff, 0xffff),    "#l"},
-{"ptraplc",    two(0xf07c, 0x0003),    two(0xffff, 0xffff),    ""},
-
-{"ptraplsw",   two(0xf07a, 0x0002),    two(0xffff, 0xffff),    "#w"},
-{"ptraplsl",   two(0xf07b, 0x0002),    two(0xffff, 0xffff),    "#l"},
-{"ptrapls",    two(0xf07c, 0x0002),    two(0xffff, 0xffff),    ""},
-
-{"ptrapscw",   two(0xf07a, 0x0005),    two(0xffff, 0xffff),    "#w"},
-{"ptrapscl",   two(0xf07b, 0x0005),    two(0xffff, 0xffff),    "#l"},
-{"ptrapsc",    two(0xf07c, 0x0005),    two(0xffff, 0xffff),    ""},
-
-{"ptrapssw",   two(0xf07a, 0x0004),    two(0xffff, 0xffff),    "#w"},
-{"ptrapssl",   two(0xf07b, 0x0004),    two(0xffff, 0xffff),    "#l"},
-{"ptrapss",    two(0xf07c, 0x0004),    two(0xffff, 0xffff),    ""},
-
-{"ptrapwcw",   two(0xf07a, 0x0009),    two(0xffff, 0xffff),    "#w"},
-{"ptrapwcl",   two(0xf07b, 0x0009),    two(0xffff, 0xffff),    "#l"},
-{"ptrapwc",    two(0xf07c, 0x0009),    two(0xffff, 0xffff),    ""},
-
-{"ptrapwsw",   two(0xf07a, 0x0008),    two(0xffff, 0xffff),    "#w"},
-{"ptrapwsl",   two(0xf07b, 0x0008),    two(0xffff, 0xffff),    "#l"},
-{"ptrapws",    two(0xf07c, 0x0008),    two(0xffff, 0xffff),    ""},
-
-{"pvalid",     two(0xf000, 0x2800),    two(0xffc0, 0xffff),    "Vs&s"},
-{"pvalid",     two(0xf000, 0x2c00),    two(0xffc0, 0xfff8),    "A3&s" },
-
-#endif /* m68851 */
-
-};
-
-int numopcodes=sizeof(m68k_opcodes)/sizeof(m68k_opcodes[0]);
-
-struct m68k_opcode *endop = m68k_opcodes+sizeof(m68k_opcodes)/sizeof(m68k_opcodes[0]);
index c5e643a..e69de29 100755 (executable)
@@ -1,585 +0,0 @@
-/* This file has been modified by Data General Corporation, November 1989. */
-
-
-/*
-*                      Disassembler Instruction Table
-*
-*      The first field of the table is the opcode field. If an opcode
-*      is specified which has any non-opcode bits on, a system error
-*      will occur when the system attempts the install it into the
-*      instruction table.  The second parameter is a pointer to the
-*      instruction mnemonic. Each operand is specified by offset, width,
-*      and type. The offset is the bit number of the least significant
-*      bit of the operand with bit 0 being the least significant bit of
-*      the instruction. The width is the number of bits used to specify
-*      the operand. The type specifies the output format to be used for
-*      the operand. The valid formats are: register, register indirect,
-*      hex constant, and bit field specification.  The last field is a
-*      pointer to the next instruction in the linked list.  These pointers
-*      are initialized by init_disasm().
-*
-*                              Structure Format
-*
-*       struct INSTAB {
-*          UPINT opcode;
-*          char *mnemonic;
-*          struct OPSPEC op1,op2,op3;
-*          struct SIM_FLAGS flgs;
-*          struct INSTAB *next;
-*       }
-*
-*       struct OPSPEC {
-*          UPINT offset:5;
-*          UPINT width:6;
-*          UPINT type:5;
-*       }
-*
-*                              Revision History
-*
-*      Revision 1.0    11/08/85        Creation date
-*               1.1    02/05/86        Updated instruction mnemonic table MD
-*               1.2    06/16/86        Updated SIM_FLAGS for floating point
-*               1.3    09/20/86        Updated for new encoding
-*                      05/11/89        R. Trawick adapted from Motorola disassembler
-*/
-
-#include <stdio.h>
-
-
-/*
- * This file contains the structures and constants needed to build the M88000
- * simulator.  It is the main include file, containing all the
- * structures, macros and definitions except for the floating point
- * instruction set.
- */
-
-/*
- * The following flag informs the Simulator as to what type of byte ordering
- * will be used. For instance, a BOFLAG = 1 indicates a DEC VAX and IBM type
- * of ordering shall be used.
-*/
-
-/* # define     BOFLAG   1                       /* BYTE ORDERING FLAG */
-
-/* define the number of bits in the primary opcode field of the instruction,
- * the destination field, the source 1 and source 2 fields.
- */
-# define    OP       8                        /* size of opcode field */ 
-# define    DEST     6                        /* size of destination  */
-# define    SOURCE1  6                        /* size of source1      */
-# define    SOURCE2  6                        /* size of source2      */
-
-# define    REGs    32                        /* number of registers  */
-
-# define    WORD    long
-# define    FLAG    unsigned
-# define    STATE   short 
-
-# define    TRUE     1
-# define    FALSE    0
-
-# define    READ     0
-# define    WRITE    1
-
-/* The next four equates define the priorities that the various classes
- * of instructions have regarding writing results back into registers and
- * signalling exceptions.
- */
-
-# define    PINT  0   /* Integer Priority */
-# define    PFLT  1   /* Floating Point Priority */
-# define    PMEM  2   /* Memory Priority */
-# define    NA    3   /* Not Applicable, instruction doesnt write to regs */
-# define    HIPRI 3   /* highest of these priorities */
-
-/* The instruction registers are an artificial mechanism to speed up
- * simulator execution.  In the real processor, an instruction register
- * is 32 bits wide.  In the simulator, the 32 bit instruction is kept in
- * a structure field called rawop, and the instruction is partially decoded,
- * and split into various fields and flags which make up the other fields
- * of the structure.
- * The partial decode is done when the instructions are initially loaded
- * into simulator memory.  The simulator code memory is not an array of
- * 32 bit words, but is an array of instruction register structures.
- * Yes this wastes memory, but it executes much quicker.
- */
-
-struct IR_FIELDS {
-                   unsigned long   op:OP,
-                                   dest: DEST,
-                                   src1: SOURCE1,
-                                   src2: SOURCE2;
-                             int   ltncy,
-                                   extime,
-                                   wb_pri;     /* writeback priority     */
-                   unsigned short  imm_flags:2,/* immediate size         */
-                                   rs1_used:1, /* register source 1 used */
-                                   rs2_used:1, /* register source 2 used */
-                                   rsd_used:1, /* register source/dest. used */
-                                   c_flag:1,   /* complement      */
-                                   u_flag:1,   /* upper half word */
-                                   n_flag:1,   /* execute next    */
-                                   wb_flag:1,  /* uses writeback slot */
-                                   dest_64:1,  /* dest size       */
-                                   s1_64:1,    /* source 1 size   */
-                                   s2_64:1,    /* source 2 size   */
-                                   scale_flag:1, /* scaled register */
-                                   brk_flg:1;
-                 };
-
-struct mem_segs {
-       struct mem_wrd *seg;                    /* pointer (returned by calloc) to segment */
-       unsigned long baseaddr;                 /* base load address from file headers */
-       unsigned long endaddr;                  /* Ending address of segment */
-       int           flags;                    /* segment control flags (none defined 12/5/86) */
-};
-
-#define        MAXSEGS         (10)                    /* max number of segment allowed */
-#define        MEMSEGSIZE      (sizeof(struct mem_segs))/* size of mem_segs structure */
-
-
-#define BRK_RD         (0x01)                  /* break on memory read */
-#define BRK_WR         (0x02)                  /* break on memory write */
-#define BRK_EXEC       (0x04)                  /* break on execution */
-#define        BRK_CNT         (0x08)                  /* break on terminal count */
-
-
-struct mem_wrd {
-       struct IR_FIELDS opcode;                /* simulator instruction break down */
-       union {
-               unsigned long  l;               /* memory element break down */
-               unsigned short s[2];
-               unsigned char  c[4];
-       } mem;
-};
-
-#define        MEMWRDSIZE      (sizeof(struct mem_wrd))        /* size of each 32 bit memory model */
-
-/* External declarations */
-
-extern struct mem_segs memory[];
-extern struct PROCESSOR m78000;
-
-struct  PROCESSOR   {
-            unsigned WORD
-                           ip,          /* execute instruction pointer */
-                           vbr,         /* vector base register */
-                           psr;         /* processor status register */
-
-                   WORD    S1bus, /* source 1 */
-                            S2bus, /* source 2 */
-                            Dbus,  /* destination */
-                           DAbus, /* data address bus */
-                            ALU,
-                           Regs[REGs],       /* data registers */
-                           time_left[REGs],  /* max clocks before reg is available */
-                           wb_pri[REGs],     /* writeback priority of reg */
-                           SFU0_regs[REGs],  /* integer unit control regs */
-                           SFU1_regs[REGs],  /* floating point control regs */
-                           Scoreboard[REGs],
-                           Vbr;
-           unsigned WORD   scoreboard,
-                           Psw,
-                           Tpsw;
-                   FLAG   jump_pending:1;   /* waiting for a jump instr. */
-                    };
-
-# define    i26bit      1    /* size of immediate field */
-# define    i16bit      2
-# define    i10bit      3
-
-/* Definitions for fields in psr */
-
-# define mode  31
-# define rbo   30
-# define ser   29
-# define carry 28
-# define sf7m  11
-# define sf6m  10
-# define sf5m   9
-# define sf4m   8
-# define sf3m   7
-# define sf2m   6
-# define sf1m   5
-# define mam    4
-# define inm    3
-# define exm    2
-# define trm    1
-# define ovfm   0
-
-#define            MODEMASK   (1<<(mode-1))
-# define    SILENT     0   /* simulate without output to crt */
-# define    VERBOSE    1   /* simulate in verbose mode */
-# define    PR_INSTR   2   /* only print instructions */
-
-# define    RESET      16 /* reset phase */
-
-# define    PHASE1     0  /* data path phases */
-# define    PHASE2     1
-
-/* the 1 clock operations */
-
-# define    ADDU        1
-# define    ADDC        2
-# define    ADDUC       3
-# define    ADD         4
-
-# define    SUBU    ADD+1
-# define    SUBB    ADD+2
-# define    SUBUB   ADD+3
-# define    SUB     ADD+4
-
-# define    AND     ADD+5
-# define    OR      ADD+6
-# define    XOR     ADD+7
-# define    CMP     ADD+8
-                        
-/* the LOADS */
-
-# define    LDAB    CMP+1
-# define    LDAH    CMP+2
-# define    LDA     CMP+3
-# define    LDAD    CMP+4
-
-# define    LDB   LDAD+1
-# define    LDH   LDAD+2
-# define    LD    LDAD+3
-# define    LDD   LDAD+4
-# define    LDBU  LDAD+5
-# define    LDHU  LDAD+6
-
-/* the STORES */
-
-# define    STB    LDHU+1
-# define    STH    LDHU+2
-# define    ST     LDHU+3
-# define    STD    LDHU+4
-
-/* the exchange */
-
-# define    XMEMBU LDHU+5
-# define    XMEM   LDHU+6
-
-/* the branches */
-# define    JSR    STD+1
-# define    BSR    STD+2
-# define    BR     STD+3
-# define    JMP    STD+4
-# define    BB1    STD+5
-# define    BB0    STD+6
-# define    RTN    STD+7
-# define    BCND   STD+8
-
-/* the TRAPS */
-# define    TB1    BCND+1
-# define    TB0    BCND+2
-# define    TCND   BCND+3
-# define    RTE    BCND+4
-# define    TBND   BCND+5
-
-/* the MISC instructions */
-# define    MUL     TBND + 1
-# define    DIV     MUL  +2
-# define    DIVU    MUL  +3
-# define    MASK    MUL  +4
-# define    FF0     MUL  +5
-# define    FF1     MUL  +6
-# define    CLR     MUL  +7
-# define    SET     MUL  +8
-# define    EXT     MUL  +9
-# define    EXTU    MUL  +10
-# define    MAK     MUL  +11
-# define    ROT     MUL  +12
-
-/* control register manipulations */
-
-# define    LDCR    ROT  +1
-# define    STCR    ROT  +2
-# define    XCR     ROT  +3
-
-# define    FLDCR    ROT  +4
-# define    FSTCR    ROT  +5
-# define    FXCR     ROT  +6
-
-
-# define    NOP     XCR +1
-
-/* floating point instructions */
-
-# define    FADD    NOP +1
-# define    FSUB    NOP +2
-# define    FMUL    NOP +3
-# define    FDIV    NOP +4
-# define    FSQRT   NOP +5
-# define    FCMP    NOP +6
-# define    FIP     NOP +7
-# define    FLT     NOP +8
-# define    INT     NOP +9
-# define    NINT    NOP +10
-# define    TRNC    NOP +11
-# define    FLDC   NOP +12
-# define    FSTC   NOP +13
-# define    FXC    NOP +14
-
-# define UEXT(src,off,wid) ((((unsigned int)(src))>>(off)) & ((1<<(wid)) - 1))
-# define SEXT(src,off,wid) (((((int)(src))<<(32-((off)+(wid)))) >>(32-(wid))) )
-# define MAKE(src,off,wid) \
-  ((((unsigned int)(src)) & ((1<<(wid)) - 1)) << (off))
-
-# define opword(n) (unsigned long) (memaddr->mem.l)
-
-/*  Constants and Masks */
-
-#define SFU0       0x80000000
-#define SFU1       0x84000000
-#define SFU7       0x9c000000
-#define RRI10      0xf0000000
-#define RRR        0xf4000000
-#define SFUMASK    0xfc00ffe0
-#define RRRMASK    0xfc00ffe0
-#define RRI10MASK  0xfc00fc00
-#define DEFMASK    0xfc000000
-#define CTRL       0x0000f000
-#define CTRLMASK   0xfc00f800
-
-/* Operands types */
-
-#define HEX          1
-#define REG          2
-#define IND          3
-#define CONT         3
-#define IND          3
-#define BF           4
-#define REGSC        5    /* scaled register */
-#define CRREG        6    /* control register */
-#define FCRREG       7    /* floating point control register */
-#define PCREL       8
-#define CONDMASK     9
-
-/* Hashing Specification */
-
-#define HASHVAL     79
-
-/* Type definitions */
-
-typedef unsigned int UINT;
-
-/* Structure templates */
-
-typedef struct {
-   unsigned int offset:5;
-   unsigned int width:6;
-   unsigned int type:5;
-} OPSPEC;
-
-       struct SIM_FLAGS {
-             int  ltncy,   /* latency (max number of clocks needed to execute) */
-                 extime,   /* execution time (min number of clocks needed to execute) */
-                 wb_pri;   /* writeback slot priority */
-   unsigned long   op:OP,   /* simulator version of opcode */
-            imm_flags:2,   /* 10,16 or 26 bit immediate flags */
-             rs1_used:1,   /* register source 1 used */
-             rs2_used:1,   /* register source 2 used */
-             rsd_used:1,   /* register source/dest used */
-               c_flag:1,   /* complement */
-               u_flag:1,   /* upper half word */
-               n_flag:1,   /* execute next */
-              wb_flag:1,   /* uses writeback slot */
-              dest_64:1,   /* double precision dest */
-                s1_64:1,   /* double precision source 1 */
-                s2_64:1,   /* double precision source 2 */
-           scale_flag:1;   /* register is scaled */
-};
-
-typedef struct INSTRUCTAB {
-   unsigned int  opcode;
-   char          *mnemonic;
-   OPSPEC        op1,op2,op3;
-   struct SIM_FLAGS flgs;
-   struct INSTRUCTAB    *next;
-} INSTAB;
-\f
-
-/* Opcode     Mnemonic       Op 1 Spec     Op 2 Spec    Op 3 Spec         Simflags             Next  */
-
-static INSTAB  instructions[] =
-{0xf400c800,"jsr      ",{0,5,REG}   ,{0,0,0}      ,{0,0,0}   , {2,2,NA,JSR ,          0,0,1,0,0,0,0,1,0,0,0,0}, NULL,
- 0xf400cc00,"jsr.n    ",{0,5,REG}   ,{0,0,0}      ,{0,0,0}   , {1,1,NA,JSR ,          0,0,1,0,0,0,1,1,0,0,0,0}, NULL,
- 0xf400c000,"jmp      ",{0,5,REG}   ,{0,0,0}      ,{0,0,0}   , {2,2,NA,JMP ,          0,0,1,0,0,0,0,1,0,0,0,0}, NULL,
- 0xf400c400,"jmp.n    ",{0,5,REG}   ,{0,0,0}      ,{0,0,0}   , {1,1,NA,JMP ,          0,0,1,0,0,0,1,1,0,0,0,0}, NULL,
- 0xc8000000,"bsr      ",{0,26,PCREL},{0,0,0}      ,{0,0,0}   , {2,2,NA,BSR ,     i26bit,0,0,0,0,0,0,1,0,0,0,0}, NULL,
- 0xcc000000,"bsr.n    ",{0,26,PCREL},{0,0,0}      ,{0,0,0}   , {1,1,NA,BSR ,     i26bit,0,0,0,0,0,1,1,0,0,0,0}, NULL,
- 0xc0000000,"br       ",{0,26,PCREL},{0,0,0}      ,{0,0,0}   , {2,2,NA,BR  ,     i26bit,0,0,0,0,0,0,1,0,0,0,0}, NULL,
- 0xc4000000,"br.n     ",{0,26,PCREL},{0,0,0}      ,{0,0,0}   , {1,1,NA,BR  ,     i26bit,0,0,0,0,0,1,1,0,0,0,0}, NULL,
- 0xd0000000,"bb0      ",{21,5,HEX}  ,{16,5,REG}   ,{0,16,PCREL},{2,2,NA,BB0,     i16bit,0,1,0,0,0,0,1,0,0,0,0}, NULL,
- 0xd4000000,"bb0.n    ",{21,5,HEX}  ,{16,5,REG}   ,{0,16,PCREL},{1,1,NA,BB0,     i16bit,0,1,0,0,0,1,1,0,0,0,0}, NULL,
- 0xd8000000,"bb1      ",{21,5,HEX},{16,5,REG}     ,{0,16,PCREL},{2,2,NA,BB1,     i16bit,0,1,0,0,0,0,1,0,0,0,0}, NULL,
- 0xdc000000,"bb1.n    ",{21,5,HEX},{16,5,REG}     ,{0,16,PCREL},{1,1,NA,BB1,     i16bit,0,1,0,0,0,1,1,0,0,0,0}, NULL,
- 0xf000d000,"tb0      ",{21,5,HEX}  ,{16,5,REG}   ,{0,10,HEX}, {2,2,NA,TB0 ,     i10bit,0,1,0,0,0,0,1,0,0,0,0}, NULL,
- 0xf000d800,"tb1      ",{21,5,HEX}  ,{16,5,REG}   ,{0,10,HEX}, {2,2,NA,TB1 ,     i10bit,0,1,0,0,0,0,1,0,0,0,0}, NULL,
- 0xe8000000,"bcnd     ",{21,5,CONDMASK},{16,5,REG},{0,16,PCREL},{2,2,NA,BCND,    i16bit,0,1,0,0,0,0,1,0,0,0,0}, NULL,
- 0xec000000,"bcnd.n   ",{21,5,CONDMASK},{16,5,REG},{0,16,PCREL},{1,1,NA,BCND,    i16bit,0,1,0,0,0,1,1,0,0,0,0}, NULL,
- 0xf000e800,"tcnd     ",{21,5,CONDMASK},{16,5,REG},{0,10,HEX}, {2,2,NA,TCND,     i10bit,0,1,0,0,0,0,1,0,0,0,0}, NULL,
- 0xf8000000,"tbnd     ",{16,5,REG}  ,{0,16,HEX}   ,{0,0,0}   , {2,2,NA,TBND,     i10bit,1,0,0,0,0,0,1,0,0,0,0}, NULL,
- 0xf400f800,"tbnd     ",{16,5,REG}  ,{0,5,REG}    ,{0,0,0}   , {2,2,NA,TBND,          0,1,1,0,0,0,0,1,0,0,0,0}, NULL,
- 0xf400fc00,"rte      ",{0,0,0}     ,{0,0,0}      ,{0,0,0}   , {2,2,NA,RTE ,          0,0,0,0,0,0,0,1,0,0,0,0}, NULL,
- 0x1c000000,"ld.b     ",{21,5,REG}  ,{16,5,REG}   ,{0,16,HEX}, {3,1,PMEM,LDB    ,i16bit,1,0,1,0,0,0,1,0,0,0,0}, NULL,
- 0xf4001c00,"ld.b     ",{21,5,REG}  ,{16,5,REG}   ,{0,5,REG} , {3,1,PMEM,LDB     ,    0,1,1,1,0,0,0,1,0,0,0,0}, NULL,
- 0x0c000000,"ld.bu    ",{21,5,REG}  ,{16,5,REG}   ,{0,16,HEX}, {3,1,PMEM,LDBU,   i16bit,1,0,1,0,0,0,1,0,0,0,0}, NULL,
- 0xf4000c00,"ld.bu    ",{21,5,REG}  ,{16,5,REG}   ,{0,5,REG} , {3,1,PMEM,LDBU        ,0,1,1,1,0,0,0,1,0,0,0,0}, NULL,
- 0x18000000,"ld.h     ",{21,5,REG}  ,{16,5,REG}   ,{0,16,HEX}, {3,1,PMEM,LDH    ,i16bit,1,0,1,0,0,0,1,0,0,0,0}, NULL,
- 0xf4001800,"ld.h     ",{21,5,REG}  ,{16,5,REG}   ,{0,5,REG} , {3,1,PMEM,LDH         ,0,1,1,1,0,0,0,1,0,0,0,0}, NULL,
- 0xf4001a00,"ld.h     ",{21,5,REG}  ,{16,5,REG}   ,{0,5,REGSC},{3,1,PMEM,LDH         ,0,1,1,1,0,0,0,1,0,0,0,1}, NULL,
- 0x08000000,"ld.hu    ",{21,5,REG}  ,{16,5,REG}   ,{0,16,HEX}, {3,1,PMEM,LDHU,   i16bit,1,0,1,0,0,0,1,0,0,0,0}, NULL,
- 0xf4000800,"ld.hu    ",{21,5,REG}  ,{16,5,REG}   ,{0,5,REG} , {3,1,PMEM,LDHU        ,0,1,1,1,0,0,0,1,0,0,0,0}, NULL,
- 0xf4000a00,"ld.hu    ",{21,5,REG}  ,{16,5,REG}   ,{0,5,REGSC},{3,1,PMEM,LDHU        ,0,1,1,1,0,0,0,1,0,0,0,1}, NULL,
- 0x14000000,"ld       ",{21,5,REG}  ,{16,5,REG}   ,{0,16,HEX}, {3,1,PMEM,LD     ,i16bit,1,0,1,0,0,0,1,0,0,0,0}, NULL,
- 0xf4001400,"ld       ",{21,5,REG}  ,{16,5,REG}   ,{0,5,REG} , {3,1,PMEM,LD          ,0,1,1,1,0,0,0,1,0,0,0,0}, NULL,
- 0xf4001600,"ld       ",{21,5,REG}  ,{16,5,REG}   ,{0,5,REGSC},{3,1,PMEM,LD          ,0,1,1,1,0,0,0,1,0,0,0,1}, NULL,
- 0x10000000,"ld.d     ",{21,5,REG}  ,{16,5,REG}   ,{0,16,HEX}, {3,1,PMEM,LDD    ,i16bit,1,0,1,0,0,0,1,0,0,0,0}, NULL,
- 0xf4001000,"ld.d     ",{21,5,REG}  ,{16,5,REG}   ,{0,5,REG} , {3,1,PMEM,LDD         ,0,1,1,1,0,0,0,1,0,0,0,0}, NULL,
- 0xf4001200,"ld.d     ",{21,5,REG}  ,{16,5,REG}   ,{0,5,REGSC},{3,1,PMEM,LDD         ,0,1,1,1,0,0,0,1,0,0,0,1}, NULL,
- 0xf4001500,"ld.usr   ",{21,5,REG}  ,{16,5,REG}   ,{0,5,REG} , {3,1,PMEM,LD          ,0,1,1,1,0,0,0,1,0,0,0,0}, NULL,
- 0xf4001700,"ld.usr   ",{21,5,REG}  ,{16,5,REG}   ,{0,5,REGSC},{3,1,PMEM,LD          ,0,1,1,1,0,0,0,1,0,0,0,1}, NULL,
- 0x2c000000,"st.b     ",{21,5,REG}  ,{16,5,REG}   ,{0,16,HEX}, {1,1,NA,STB      ,i16bit,1,0,1,0,0,0,1,0,0,0,0}, NULL,
- 0xf4002c00,"st.b     ",{21,5,REG}  ,{16,5,REG}   ,{0,5,REG} , {1,1,NA,STB           ,0,1,1,1,0,0,0,1,0,0,0,0}, NULL,
- 0x28000000,"st.h     ",{21,5,REG}  ,{16,5,REG}   ,{0,16,HEX}, {1,1,NA,STH      ,i16bit,1,0,1,0,0,0,1,0,0,0,0}, NULL,
- 0xf4002800,"st.h     ",{21,5,REG}  ,{16,5,REG}   ,{0,5,REG} , {1,1,NA,STH           ,0,1,1,1,0,0,0,1,0,0,0,0}, NULL,
- 0xf4002a00,"st.h     ",{21,5,REG}  ,{16,5,REG}   ,{0,5,REGSC},{1,1,NA,STH           ,0,1,1,1,0,0,0,1,0,0,0,1}, NULL,
- 0x24000000,"st       ",{21,5,REG}  ,{16,5,REG}   ,{0,16,HEX}, {1,1,NA,ST       ,i16bit,1,0,1,0,0,0,1,0,0,0,0}, NULL,
- 0xf4002400,"st       ",{21,5,REG}  ,{16,5,REG}   ,{0,5,REG} , {1,1,NA,ST            ,0,1,1,1,0,0,0,1,0,0,0,0}   ,NULL,
- 0xf4002600,"st       ",{21,5,REG}  ,{16,5,REG}   ,{0,5,REGSC},{1,1,NA,ST            ,0,1,1,1,0,0,0,1,0,0,0,1}   ,NULL,
- 0x20000000,"st.d     ",{21,5,REG}  ,{16,5,REG}   ,{0,16,HEX}, {1,1,NA,STD      ,i16bit,0,1,0,0,0,0,1,0,0,0,0}   ,NULL,
- 0xf4002000,"st.d     ",{21,5,REG}  ,{16,5,REG}   ,{0,5,REG} , {1,1,NA,STD           ,0,1,1,1,0,0,0,1,0,0,0,0}   ,NULL,
- 0xf4002200,"st.d     ",{21,5,REG}  ,{16,5,REG}   ,{0,5,REGSC},{1,1,NA,STD           ,0,1,1,1,0,0,0,1,0,0,0,1}   ,NULL,
- 0xf4002500,"st.usr   ",{21,5,REG}  ,{16,5,REG}   ,{0,5,REG} , {1,1,NA,ST            ,0,1,1,1,0,0,0,1,0,0,0,0}   ,NULL,
- 0xf4002700,"st.usr   ",{21,5,REG}  ,{16,5,REG}   ,{0,5,REGSC},{1,1,NA,ST            ,0,1,1,1,0,0,0,1,0,0,0,1}   ,NULL,
- 0x00000000,"xmem.bu  ",{21,5,REG}  ,{16,5,REG}   ,{0,16,HEX}, {3,1,PMEM,XMEMBU ,i16bit,1,1,1,0,0,0,1,0,0,0,0}   ,NULL,
- 0xf4000000,"xmem.bu  ",{21,5,REG}  ,{16,5,REG}   ,{0,5,REG} , {3,1,PMEM,XMEM        ,0,1,1,1,0,0,0,1,0,0,0,0}   ,NULL,
- 0x04000000,"xmem     ",{21,5,REG}  ,{16,5,REG}   ,{0,16,HEX}, {3,1,PMEM,XMEM   ,i16bit,1,1,1,0,0,0,1,0,0,0,0}   ,NULL,
- 0xf4000400,"xmem     ",{21,5,REG}  ,{16,5,REG}   ,{0,5,REG} , {3,1,PMEM,XMEM        ,0,1,1,1,0,0,0,1,0,0,0,0}   ,NULL,
- 0xf4000600,"xmem     ",{21,5,REG}  ,{16,5,REG}   ,{0,5,REGSC},{3,1,PMEM,XMEM        ,0,1,1,1,0,0,0,1,0,0,0,1}   ,NULL,
- 0xf4000500,"xmem.usr ",{21,5,REG}  ,{16,5,REG}   ,{0,5,REG} , {3,1,PMEM,XMEM        ,0,1,1,1,0,0,0,1,0,0,0,0}   ,NULL,
- 0xf4000700,"xmem.usr ",{21,5,REG}  ,{16,5,REG}   ,{0,5,REGSC},{3,1,PMEM,XMEM        ,0,1,1,1,0,0,0,1,0,0,0,1}   ,NULL,
- 0xf4003e00,"lda.b    ",{21,5,REG}  ,{16,5,REG}   ,{0,5,REGSC},{1,1,PINT,LDAH,        0,1,1,1,0,0,0,0,0,0,0,1}   ,NULL,
- 0xf4003a00,"lda.h    ",{21,5,REG}  ,{16,5,REG}   ,{0,5,REGSC},{1,1,PINT,LDAH,        0,1,1,1,0,0,0,0,0,0,0,1}   ,NULL,
- 0xf4003600,"lda      ",{21,5,REG}  ,{16,5,REG}   ,{0,5,REGSC},{1,1,PINT,LDA ,        0,1,1,1,0,0,0,0,0,0,0,1}   ,NULL,
- 0xf4003200,"lda.d    ",{21,5,REG}  ,{16,5,REG}   ,{0,5,REGSC},{1,1,PINT,LDAD,        0,1,1,1,0,0,0,0,0,0,0,1}   ,NULL,
-
- 0x80004000,"ldcr     ",{21,5,REG}  ,{5,6,CRREG}  ,{0,0,0}    ,{1,1,PINT,LDCR,        0,1,1,1,0,0,0,0,0,0,0,0}   ,NULL,
- 0x80008000,"stcr     ",{16,5,REG}  ,{5,6,CRREG}  ,{0,0,0}    ,{1,1,PINT,STCR,        0,1,1,1,0,0,0,0,0,0,0,0}   ,NULL,
- 0x8000c000,"xcr      ",{21,5,REG}  ,{16,5,REG}   ,{5,6,CRREG},{1,1,PINT,XCR,         0,1,1,1,0,0,0,0,0,0,0,0}   ,NULL,
-
- 0xf4006000,"addu     ",{21,5,REG}  ,{16,5,REG}   ,{0,5,REG} , {1,1,PINT,ADDU,        0,1,1,1,0,0,0,0,0,0,0,0}   ,NULL,
- 0xf4006200,"addu.ci  ",{21,5,REG}  ,{16,5,REG}   ,{0,5,REG} , {1,1,PINT,ADDU,        0,1,1,1,0,0,0,0,0,0,0,0}   ,NULL,
- 0xf4006100,"addu.co  ",{21,5,REG}  ,{16,5,REG}   ,{0,5,REG} , {1,1,PINT,ADDU,        0,1,1,1,0,0,0,0,0,0,0,0}   ,NULL,
- 0xf4006300,"addu.cio ",{21,5,REG}  ,{16,5,REG}   ,{0,5,REG} , {1,1,PINT,ADDU,        0,1,1,1,0,0,0,0,0,0,0,0}   ,NULL,
- 0xf4006400,"subu     ",{21,5,REG}  ,{16,5,REG}   ,{0,5,REG} , {1,1,PINT,SUBU,        0,1,1,1,0,0,0,0,0,0,0,0}   ,NULL,
- 0xf4006600,"subu.ci  ",{21,5,REG}  ,{16,5,REG}   ,{0,5,REG} , {1,1,PINT,SUBU,        0,1,1,1,0,0,0,0,0,0,0,0}   ,NULL,
- 0xf4006500,"subu.co  ",{21,5,REG}  ,{16,5,REG}   ,{0,5,REG} , {1,1,PINT,SUBU,        0,1,1,1,0,0,0,0,0,0,0,0}   ,NULL,
- 0xf4006700,"subu.cio ",{21,5,REG}  ,{16,5,REG}   ,{0,5,REG} , {1,1,PINT,SUBU,        0,1,1,1,0,0,0,0,0,0,0,0}   ,NULL,
- 0xf4006900,"divu     ",{21,5,REG}  ,{16,5,REG}   ,{0,5,REG} , {32,32,PINT,DIVU,        0,1,1,1,0,0,0,0,0,0,0,0}   ,NULL,
- 0xf4006d00,"mul      ",{21,5,REG}  ,{16,5,REG}   ,{0,5,REG} , {1,4,PINT,MUL,      0,1,1,1,0,0,0,0,0,0,0,0}   ,NULL,
- 0xf4007000,"add      ",{21,5,REG}  ,{16,5,REG}   ,{0,5,REG} , {1,1,PINT,ADD ,        0,1,1,1,0,0,0,0,0,0,0,0}   ,NULL,
- 0xf4007200,"add.ci   ",{21,5,REG}  ,{16,5,REG}   ,{0,5,REG} , {1,1,PINT,ADD ,        0,1,1,1,0,0,0,0,0,0,0,0}   ,NULL,
- 0xf4007100,"add.co   ",{21,5,REG}  ,{16,5,REG}   ,{0,5,REG} , {1,1,PINT,ADD ,        0,1,1,1,0,0,0,0,0,0,0,0}   ,NULL,
- 0xf4007300,"add.cio  ",{21,5,REG}  ,{16,5,REG}   ,{0,5,REG} , {1,1,PINT,ADD ,        0,1,1,1,0,0,0,0,0,0,0,0}   ,NULL,
- 0xf4007400,"sub      ",{21,5,REG}  ,{16,5,REG}   ,{0,5,REG} , {1,1,PINT,SUB ,        0,1,1,1,0,0,0,0,0,0,0,0}   ,NULL,
- 0xf4007600,"sub.ci   ",{21,5,REG}  ,{16,5,REG}   ,{0,5,REG} , {1,1,PINT,SUB ,        0,1,1,1,0,0,0,0,0,0,0,0}   ,NULL,
- 0xf4007500,"sub.co   ",{21,5,REG}  ,{16,5,REG}   ,{0,5,REG} , {1,1,PINT,SUB ,        0,1,1,1,0,0,0,0,0,0,0,0}   ,NULL,
- 0xf4007700,"sub.cio  ",{21,5,REG}  ,{16,5,REG}   ,{0,5,REG} , {1,1,PINT,SUB ,        0,1,1,1,0,0,0,0,0,0,0,0}   ,NULL,
- 0xf4007900,"div      ",{21,5,REG}  ,{16,5,REG}   ,{0,5,REG} , {32,32,PINT,DIV ,      0,1,1,1,0,0,0,0,0,0,0,0}   ,NULL,
- 0xf4007d00,"cmp      ",{21,5,REG}  ,{16,5,REG}   ,{0,5,REG} , {1,1,PINT,CMP,         0,1,1,1,0,0,0,0,0,0,0,0}   ,NULL,
-
- 0x60000000,"addu     ",{21,5,REG}  ,{16,5,REG}   ,{0,16,HEX}, {1,1,PINT,ADDU,   i16bit,1,0,1,0,0,0,0,0,0,0,0}   ,NULL,
- 0x64000000,"subu     ",{21,5,REG}  ,{16,5,REG}   ,{0,16,HEX}, {1,1,PINT,SUBU,   i16bit,1,0,1,0,0,0,0,0,0,0,0}   ,NULL,
-
- 0x68000000,"divu     ",{21,5,REG}  ,{16,5,REG}   ,{0,16,HEX}, {32,32,PINT,DIVU, i16bit,1,0,1,0,0,0,0,0,0,0,0}   ,NULL,
- 0x6c000000,"mul      ",{21,5,REG}  ,{16,5,REG}   ,{0,16,HEX}, {4,1,PINT,MUL,    i16bit,1,0,1,0,0,0,0,0,0,0,0}   ,NULL,
- 0x70000000,"add      ",{21,5,REG}  ,{16,5,REG}   ,{0,16,HEX}, {1,1,PINT,ADD,    i16bit,1,0,1,0,0,0,0,0,0,0,0}   ,NULL,
- 0x74000000,"sub      ",{21,5,REG}  ,{16,5,REG}   ,{0,16,HEX}, {1,1,PINT,SUB,    i16bit,1,0,1,0,0,0,0,0,0,0,0}   ,NULL,
- 0x78000000,"div      ",{21,5,REG}  ,{16,5,REG}   ,{0,16,HEX}, {32,32,PINT,DIV,  i16bit,1,0,1,0,0,0,0,0,0,0,0}   ,NULL,
- 0x7c000000,"cmp      ",{21,5,REG}  ,{16,5,REG}   ,{0,16,HEX}, {1,1,PINT,CMP,    i16bit,1,0,1,0,0,0,0,0,0,0,0}   ,NULL,
-
- 0xf4004000,"and      ",{21,5,REG}  ,{16,5,REG}   ,{0,5,REG} , {1,1,PINT,AND         ,0,1,1,1,0,0,0,0,0,0,0,0}   ,NULL,
- 0xf4004400,"and.c    ",{21,5,REG}  ,{16,5,REG}   ,{0,5,REG} , {1,1,PINT,AND         ,0,1,1,1,1,0,0,0,0,0,0,0}   ,NULL,
- 0xf4005800,"or       ",{21,5,REG}  ,{16,5,REG}   ,{0,5,REG} , {1,1,PINT,OR          ,0,1,1,1,0,0,0,0,0,0,0,0}   ,NULL,
- 0xf4005c00,"or.c     ",{21,5,REG}  ,{16,5,REG}   ,{0,5,REG} , {1,1,PINT,OR          ,0,1,1,1,1,0,0,0,0,0,0,0}   ,NULL,
- 0xf4005000,"xor      ",{21,5,REG}  ,{16,5,REG}   ,{0,5,REG} , {1,1,PINT,XOR         ,0,1,1,1,0,0,0,0,0,0,0,0}   ,NULL,
- 0xf4005400,"xor.c    ",{21,5,REG}  ,{16,5,REG}   ,{0,5,REG} , {1,1,PINT,XOR         ,0,1,1,1,1,0,0,0,0,0,0,0}   ,NULL,
- 0x40000000,"and      ",{21,5,REG}  ,{16,5,REG}   ,{0,16,HEX}, {1,1,PINT,AND    ,i16bit,1,0,1,0,0,0,0,0,0,0,0}   ,NULL,
- 0x44000000,"and.u    ",{21,5,REG}  ,{16,5,REG}   ,{0,16,HEX}, {1,1,PINT,AND    ,i16bit,1,0,1,0,1,0,0,0,0,0,0}   ,NULL,
- 0x58000000,"or       ",{21,5,REG}  ,{16,5,REG}   ,{0,16,HEX}, {1,1,PINT,OR     ,i16bit,1,0,1,0,0,0,0,0,0,0,0}   ,NULL,
- 0x5c000000,"or.u     ",{21,5,REG}  ,{16,5,REG}   ,{0,16,HEX}, {1,1,PINT,OR     ,i16bit,1,0,1,0,1,0,0,0,0,0,0}   ,NULL,
- 0x50000000,"xor      ",{21,5,REG}  ,{16,5,REG}   ,{0,16,HEX}, {1,1,PINT,XOR    ,i16bit,1,0,1,0,0,0,0,0,0,0,0}   ,NULL,
- 0x54000000,"xor.u    ",{21,5,REG}  ,{16,5,REG}   ,{0,16,HEX}, {1,1,PINT,XOR    ,i16bit,1,0,1,0,1,0,0,0,0,0,0}   ,NULL,
- 0x48000000,"mask     ",{21,5,REG}  ,{16,5,REG}   ,{0,16,HEX}, {1,1,PINT,MASK   ,i16bit,1,0,1,0,0,0,0,0,0,0,0}   ,NULL,
- 0x4c000000,"mask.u   ",{21,5,REG}  ,{16,5,REG}   ,{0,16,HEX}, {1,1,PINT,MASK   ,i16bit,1,0,1,0,1,0,0,0,0,0,0}   ,NULL,
- 0xf400ec00,"ff0      ",{21,5,REG}  ,{0,5,REG}    ,{0,0,0}   , {1,1,PINT,FF0         ,0,0,1,1,0,0,0,0,0,0,0,0}   ,NULL,
- 0xf400e800,"ff1      ",{21,5,REG}  ,{0,5,REG}    ,{0,0,0}   , {1,1,PINT,FF1         ,0,0,1,1,0,0,0,0,0,0,0,0}   ,NULL,
- 0xf0008000,"clr      ",{21,5,REG}  ,{16,5,REG}   ,{0,10,BF} , {1,1,PINT,CLR    ,i10bit,1,0,1,0,0,0,0,0,0,0,0}   ,NULL,
- 0xf0008800,"set      ",{21,5,REG}  ,{16,5,REG}   ,{0,10,BF} , {1,1,PINT,SET    ,i10bit,1,0,1,0,0,0,0,0,0,0,0}   ,NULL,
- 0xf0009000,"ext      ",{21,5,REG}  ,{16,5,REG}   ,{0,10,BF} , {1,1,PINT,EXT    ,i10bit,1,0,1,0,0,0,0,0,0,0,0}   ,NULL,
- 0xf0009800,"extu     ",{21,5,REG}  ,{16,5,REG}   ,{0,10,BF} , {1,1,PINT,EXTU   ,i10bit,1,0,1,0,0,0,0,0,0,0,0}   ,NULL,
- 0xf000a000,"mak      ",{21,5,REG}  ,{16,5,REG}   ,{0,10,BF} , {1,1,PINT,MAK    ,i10bit,1,0,1,0,0,0,0,0,0,0,0}   ,NULL,
- 0xf000a800,"rot      ",{21,5,REG}  ,{16,5,REG}   ,{0,10,BF} , {1,1,PINT,ROT    ,i10bit,1,0,1,0,0,0,0,0,0,0,0}   ,NULL,
- 0xf4008000,"clr      ",{21,5,REG}  ,{16,5,REG}   ,{0,5,REG} , {1,1,PINT,CLR         ,0,1,1,1,0,0,0,0,0,0,0,0}   ,NULL,
- 0xf4008800,"set      ",{21,5,REG}  ,{16,5,REG}   ,{0,5,REG} , {1,1,PINT,SET         ,0,1,1,1,0,0,0,0,0,0,0,0}   ,NULL,
- 0xf4009000,"ext      ",{21,5,REG}  ,{16,5,REG}   ,{0,5,REG} , {1,1,PINT,EXT         ,0,1,1,1,0,0,0,0,0,0,0,0}   ,NULL,
- 0xf4009800,"extu     ",{21,5,REG}  ,{16,5,REG}   ,{0,5,REG} , {1,1,PINT,EXTU        ,0,1,1,1,0,0,0,0,0,0,0,0}   ,NULL,
- 0xf400a000,"mak      ",{21,5,REG}  ,{16,5,REG}   ,{0,5,REG} , {1,1,PINT,MAK         ,0,1,1,1,0,0,0,0,0,0,0,0}   ,NULL,
- 0xf400a800,"rot      ",{21,5,REG}  ,{16,5,REG}   ,{0,5,REG} , {1,1,PINT,ROT         ,0,1,1,1,0,0,0,0,0,0,0,0}   ,NULL,
-
- 0x84002800,"fadd.sss ",{21,5,REG}  ,{16,5,REG}   ,{0,5,REG} , {5,1,PFLT,FADD        ,0,1,1,1,0,0,0,1,0,0,0,0}   ,NULL,
- 0x84002880,"fadd.ssd ",{21,5,REG}  ,{16,5,REG}   ,{0,5,REG} , {6,2,PFLT,FADD        ,0,1,1,1,0,0,0,1,0,0,1,0}   ,NULL,
- 0x84002a00,"fadd.sds ",{21,5,REG}  ,{16,5,REG}   ,{0,5,REG} , {6,2,PFLT,FADD        ,0,1,1,1,0,0,0,1,0,1,0,0}   ,NULL,
- 0x84002a80,"fadd.sdd ",{21,5,REG}  ,{16,5,REG}   ,{0,5,REG} , {6,2,PFLT,FADD        ,0,1,1,1,0,0,0,1,0,1,1,0}   ,NULL,
- 0x84002820,"fadd.dss ",{21,5,REG}  ,{16,5,REG}   ,{0,5,REG} , {6,2,PFLT,FADD        ,0,1,1,1,0,0,0,1,1,0,0,0}   ,NULL,
- 0x840028a0,"fadd.dsd ",{21,5,REG}  ,{16,5,REG}   ,{0,5,REG} , {6,2,PFLT,FADD        ,0,1,1,1,0,0,0,1,1,0,1,0}   ,NULL,
- 0x84002a20,"fadd.dds ",{21,5,REG}  ,{16,5,REG}   ,{0,5,REG} , {6,2,PFLT,FADD        ,0,1,1,1,0,0,0,1,1,1,0,0}   ,NULL,
- 0x84002aa0,"fadd.ddd ",{21,5,REG}  ,{16,5,REG}   ,{0,5,REG} , {6,2,PFLT,FADD        ,0,1,1,1,0,0,0,1,1,1,1,0}   ,NULL,
- 0x84003000,"fsub.sss ",{21,5,REG}  ,{16,5,REG}   ,{0,5,REG} , {5,1,PFLT,FSUB        ,0,1,1,1,0,0,0,1,0,0,0,0}   ,NULL,
- 0x84003080,"fsub.ssd ",{21,5,REG}  ,{16,5,REG}   ,{0,5,REG} , {6,2,PFLT,FSUB        ,0,1,1,1,0,0,0,1,0,0,1,0}   ,NULL,
- 0x84003200,"fsub.sds ",{21,5,REG}  ,{16,5,REG}   ,{0,5,REG} , {6,2,PFLT,FSUB        ,0,1,1,1,0,0,0,1,0,1,0,0}   ,NULL,
- 0x84003280,"fsub.sdd ",{21,5,REG}  ,{16,5,REG}   ,{0,5,REG} , {6,2,PFLT,FSUB        ,0,1,1,1,0,0,0,1,0,1,1,0}   ,NULL,
- 0x84003020,"fsub.dss ",{21,5,REG}  ,{16,5,REG}   ,{0,5,REG} , {6,2,PFLT,FSUB        ,0,1,1,1,0,0,0,1,1,0,0,0}   ,NULL,
- 0x840030a0,"fsub.dsd ",{21,5,REG}  ,{16,5,REG}   ,{0,5,REG} , {6,2,PFLT,FSUB        ,0,1,1,1,0,0,0,1,1,0,1,0}   ,NULL,
- 0x84003220,"fsub.dds ",{21,5,REG}  ,{16,5,REG}   ,{0,5,REG} , {6,2,PFLT,FSUB        ,0,1,1,1,0,0,0,1,1,1,0,0}   ,NULL,
- 0x840032a0,"fsub.ddd ",{21,5,REG}  ,{16,5,REG}   ,{0,5,REG} , {6,2,PFLT,FSUB        ,0,1,1,1,0,0,0,1,1,1,1,0}   ,NULL,
- 0x84000000,"fmul.sss ",{21,5,REG}  ,{16,5,REG}   ,{0,5,REG} , {6,1,PFLT,FMUL        ,0,1,1,1,0,0,0,1,0,0,0,0}   ,NULL,
- 0x84000080,"fmul.ssd ",{21,5,REG}  ,{16,5,REG}   ,{0,5,REG} , {9,2,PFLT,FMUL        ,0,1,1,1,0,0,0,1,0,0,1,0}   ,NULL,
- 0x84000200,"fmul.sds ",{21,5,REG}  ,{16,5,REG}   ,{0,5,REG} , {9,2,PFLT,FMUL        ,0,1,1,1,0,0,0,1,0,1,0,0}   ,NULL,
- 0x84000280,"fmul.sdd ",{21,5,REG}  ,{16,5,REG}   ,{0,5,REG} , {9,2,PFLT,FMUL        ,0,1,1,1,0,0,0,1,0,1,1,0}   ,NULL,
- 0x84000020,"fmul.dss ",{21,5,REG}  ,{16,5,REG}   ,{0,5,REG} , {9,2,PFLT,FMUL        ,0,1,1,1,0,0,0,1,1,0,0,0}   ,NULL,
- 0x840000a0,"fmul.dsd ",{21,5,REG}  ,{16,5,REG}   ,{0,5,REG} , {9,2,PFLT,FMUL        ,0,1,1,1,0,0,0,1,1,0,1,0}   ,NULL,
- 0x84000220,"fmul.dds ",{21,5,REG}  ,{16,5,REG}   ,{0,5,REG} , {9,2,PFLT,FMUL        ,0,1,1,1,0,0,0,1,1,1,0,0}   ,NULL,
- 0x840002a0,"fmul.ddd ",{21,5,REG}  ,{16,5,REG}   ,{0,5,REG} , {9,2,PFLT,FMUL        ,0,1,1,1,0,0,0,1,1,1,1,0}   ,NULL,
- 0x84007000,"fdiv.sss ",{21,5,REG}  ,{16,5,REG}   ,{0,5,REG} , {30,30,PFLT,FDIV      ,0,1,1,1,0,0,0,1,0,0,0,0}   ,NULL,
- 0x84007080,"fdiv.ssd ",{21,5,REG}  ,{16,5,REG}   ,{0,5,REG} , {60,60,PFLT,FDIV      ,0,1,1,1,0,0,0,1,0,0,1,0}   ,NULL,
- 0x84007200,"fdiv.sds ",{21,5,REG}  ,{16,5,REG}   ,{0,5,REG} , {60,60,PFLT,FDIV      ,0,1,1,1,0,0,0,1,0,1,0,0}   ,NULL,
- 0x84007280,"fdiv.sdd ",{21,5,REG}  ,{16,5,REG}   ,{0,5,REG} , {60,60,PFLT,FDIV      ,0,1,1,1,0,0,0,1,0,1,1,0}   ,NULL,
- 0x84007020,"fdiv.dss ",{21,5,REG}  ,{16,5,REG}   ,{0,5,REG} , {60,60,PFLT,FDIV      ,0,1,1,1,0,0,0,1,1,0,0,0}   ,NULL,
- 0x840070a0,"fdiv.dsd ",{21,5,REG}  ,{16,5,REG}   ,{0,5,REG} , {60,60,PFLT,FDIV      ,0,1,1,1,0,0,0,1,1,0,1,0}   ,NULL,
- 0x84007220,"fdiv.dds ",{21,5,REG}  ,{16,5,REG}   ,{0,5,REG} , {60,60,PFLT,FDIV      ,0,1,1,1,0,0,0,1,1,1,0,0}   ,NULL,
- 0x840072a0,"fdiv.ddd ",{21,5,REG}  ,{16,5,REG}   ,{0,5,REG} , {60,60,PFLT,FDIV      ,0,1,1,1,0,0,0,1,1,1,1,0}   ,NULL,
- 0x84007800,"fsqrt.ss ",{21,5,REG}  ,{0,5,REG}    ,{0,0,0}   , {5,1,PFLT,FLT         ,0,0,1,1,0,0,0,1,0,0,0,0}   ,NULL,
- 0x84007880,"fsqrt.sd ",{21,5,REG}  ,{0,5,REG}    ,{0,0,0}   , {5,1,PFLT,FLT         ,0,0,1,1,0,0,0,1,0,0,0,0}   ,NULL,
- 0x84007820,"fsqrt.ds ",{21,5,REG}  ,{0,5,REG}    ,{0,0,0}   , {5,1,PFLT,FLT         ,0,0,1,1,0,0,0,1,0,0,0,0}   ,NULL,
- 0x840078a0,"fsqrt.dd ",{21,5,REG}  ,{0,5,REG}    ,{0,0,0}   , {6,1,PFLT,FLT         ,0,0,1,1,0,0,0,1,1,0,0,0}   ,NULL,
- 0x84003800,"fcmp.ss  ",{21,5,REG}  ,{16,5,REG}   ,{0,5,REG} , {5,1,PFLT,FCMP        ,0,1,1,1,0,0,0,1,0,0,0,0}   ,NULL,
- 0x84003880,"fcmp.sd  ",{21,5,REG}  ,{16,5,REG}   ,{0,5,REG} , {6,1,PFLT,FCMP        ,0,1,1,1,0,0,0,1,0,1,0,0}   ,NULL,
- 0x84003a00,"fcmp.ds  ",{21,5,REG}  ,{16,5,REG}   ,{0,5,REG} , {6,1,PFLT,FCMP        ,0,1,1,1,0,0,0,1,1,0,0,0}   ,NULL,
- 0x84003a80,"fcmp.dd  ",{21,5,REG}  ,{16,5,REG}   ,{0,5,REG} , {6,1,PFLT,FCMP        ,0,1,1,1,0,0,0,1,1,1,0,0}   ,NULL,
- 0x84002000,"flt.s    ",{21,5,REG}  ,{0,5,REG}    ,{0,0,0}   , {5,1,PFLT,FLT         ,0,0,1,1,0,0,0,1,0,0,0,0}   ,NULL,
- 0x84002020,"flt.d    ",{21,5,REG}  ,{0,5,REG}    ,{0,0,0}   , {6,1,PFLT,FLT         ,0,0,1,1,0,0,0,1,1,0,0,0}   ,NULL,
- 0x84004800,"int.s    ",{21,5,REG}  ,{0,5,REG}    ,{0,0,0}   , {5,1,PFLT,INT         ,0,0,1,1,0,0,0,1,0,0,0,0}   ,NULL,
- 0x84004880,"int.d    ",{21,5,REG}  ,{0,5,REG}    ,{0,0,0}   , {6,1,PFLT,INT         ,0,0,1,1,0,0,0,1,1,0,0,0}   ,NULL,
- 0x84005000,"nint.s   ",{21,5,REG}  ,{0,5,REG}    ,{0,0,0}   , {5,1,PFLT,INT         ,0,0,1,1,0,0,0,1,0,0,0,0}   ,NULL,
- 0x84005080,"nint.d   ",{21,5,REG}  ,{0,5,REG}    ,{0,0,0}   , {6,1,PFLT,INT         ,0,0,1,1,0,0,0,1,1,0,0,0}   ,NULL,
- 0x84005800,"trnc.s   ",{21,5,REG}  ,{0,5,REG}    ,{0,0,0}   , {5,1,PFLT,TRNC        ,0,0,1,1,0,0,0,1,0,0,0,0}   ,NULL,
- 0x84005880,"trnc.d   ",{21,5,REG}  ,{0,5,REG}    ,{0,0,0}   , {6,1,PFLT,TRNC        ,0,0,1,1,0,0,0,1,1,0,0,0}   ,NULL,
-
- 0x80004800,"fldcr    ",{21,5,REG}  ,{5,6,FCRREG} ,{0,0,0}   , {1,1,PFLT,FLDC        ,0,0,1,1,0,0,0,1,0,0,0,0}   ,NULL,
- 0x80008800,"fstcr    ",{16,5,REG}  ,{5,6,FCRREG} ,{0,0,0}   , {1,1,PFLT,FSTC        ,0,0,1,1,0,0,0,1,0,0,0,0}   ,NULL,
- 0x8000c800,"fxcr     ",{21,5,REG}  ,{16,5,REG}   ,{5,6,FCRREG} , {1,1,PFLT,FXC         ,0,0,1,1,0,0,0,1,0,0,0,0}   ,NULL};
-
index 9c4d1c5..e69de29 100644 (file)
@@ -1,342 +0,0 @@
-/* Host-dependent Motorola 88xxx support for GDB, the GNU Debugger.
-   Copyright 1988, 1990, 1991 Free Software Foundation, Inc.
-
-This file is part of GDB.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-#include "defs.h"
-#include "frame.h"
-#include "inferior.h"
-
-#ifdef USG
-#include <sys/types.h>
-#endif
-
-#include <sys/param.h>
-#include <sys/dir.h>
-#include <signal.h>
-#include "gdbcore.h"
-#include <sys/user.h>
-
-#ifndef USER                   /* added to support BCS ptrace_user */
-#define USER ptrace_user
-#endif
-#include <sys/ioctl.h>
-#include <fcntl.h>
-#include <sys/file.h>
-#include <sys/stat.h>
-
-#include "symtab.h"
-#include "setjmp.h"
-#include "value.h"
-
-#ifdef DELTA88
-#include <sys/ptrace.h>
-
-/* define offsets to the pc instruction offsets in ptrace_user struct */
-#define SXIP_OFFSET (char *)&u.pt_sigframe.sig_sxip - (char *)&u
-#define SNIP_OFFSET (char *)&u.pt_sigframe.sig_snip - (char *)&u
-#define SFIP_OFFSET (char *)&u.pt_sigframe.sig_sfip - (char *)&u
-#else
-/* define offsets to the pc instruction offsets in ptrace_user struct */
-#define SXIP_OFFSET (char *)&u.pt_sigframe.dg_sigframe.sc_sxip - (char *)&u
-#define SNIP_OFFSET (char *)&u.pt_sigframe.dg_sigframe.sc_snip - (char *)&u
-#define SFIP_OFFSET (char *)&u.pt_sigframe.dg_sigframe.sc_sfip - (char *)&u
-#endif
-
-extern int have_symbol_file_p();
-
-extern jmp_buf stack_jmp;
-
-extern int errno;
-extern char registers[REGISTER_BYTES];
-\f
-void
-fetch_inferior_registers (regno)
-     int regno;                /* Original value discarded */
-{
-  register unsigned int regaddr;
-  char buf[MAX_REGISTER_RAW_SIZE];
-  register int i;
-
-  struct USER u;
-  unsigned int offset;
-
-  offset = (char *) &u.pt_r0 - (char *) &u; 
-  regaddr = offset; /* byte offset to r0;*/
-
-/*  offset = ptrace (3, inferior_pid, (PTRACE_ARG3_TYPE) offset, 0) - KERNEL_U_ADDR; */
-  for (regno = 0; regno < NUM_REGS; regno++)
-    {
-      /*regaddr = register_addr (regno, offset);*/
-       /* 88k enhancement  */
-        
-      for (i = 0; i < REGISTER_RAW_SIZE (regno); i += sizeof (int))
-       {
-         *(int *) &buf[i] = ptrace (3, inferior_pid,
-                                    (PTRACE_ARG3_TYPE) regaddr, 0);
-         regaddr += sizeof (int);
-       }
-      supply_register (regno, buf);
-    }
-    /* now load up registers 36 - 38; special pc registers */
-    *(int *) &buf[0] = ptrace (3,inferior_pid,
-                              (PTRACE_ARG3_TYPE) SXIP_OFFSET ,0);
-    supply_register (SXIP_REGNUM, buf);
-    *(int *) &buf[0] = ptrace (3, inferior_pid,
-                              (PTRACE_ARG3_TYPE) SNIP_OFFSET,0);
-    supply_register (SNIP_REGNUM, buf);
-    *(int *) &buf[0] = ptrace (3, inferior_pid,
-                              (PTRACE_ARG3_TYPE) SFIP_OFFSET,0);
-    supply_register (SFIP_REGNUM, buf);
-}
-
-/* Store our register values back into the inferior.
-   If REGNO is -1, do this for all registers.
-   Otherwise, REGNO specifies which register (so we can save time).  */
-
-void
-store_inferior_registers (regno)
-     int regno;
-{
-  register unsigned int regaddr;
-  char buf[80];
-
-  struct USER u;
-
-
-  unsigned int offset = (char *) &u.pt_r0 - (char *) &u;
-
-  regaddr = offset;
-
-  if (regno >= 0)
-    {
-/*      regaddr = register_addr (regno, offset); */
-        if (regno < PC_REGNUM)
-           { 
-            regaddr = offset + regno * sizeof (int);
-             errno = 0;
-             ptrace (6, inferior_pid,
-                    (PTRACE_ARG3_TYPE) regaddr, read_register (regno));
-             if (errno != 0)
-              {
-                sprintf (buf, "writing register number %d", regno);
-                perror_with_name (buf);
-              }
-           }
-       else if (regno == SXIP_REGNUM)
-             ptrace (6, inferior_pid,
-                    (PTRACE_ARG3_TYPE) SXIP_OFFSET, read_register(regno));
-       else if (regno == SNIP_REGNUM)
-            ptrace (6, inferior_pid,
-                    (PTRACE_ARG3_TYPE) SNIP_OFFSET, read_register(regno));
-       else if (regno == SFIP_REGNUM)
-            ptrace (6, inferior_pid,
-                    (PTRACE_ARG3_TYPE) SFIP_OFFSET, read_register(regno));
-       else printf ("Bad register number for store_inferior routine\n");
-    }
-  else { 
-         for (regno = 0; regno < NUM_REGS - 3; regno++)
-           {
-      /*      regaddr = register_addr (regno, offset); */
-              errno = 0;
-              regaddr = offset + regno * sizeof (int);
-              ptrace (6, inferior_pid,
-                     (PTRACE_ARG3_TYPE) regaddr, read_register (regno));
-              if (errno != 0)
-               {
-                 sprintf (buf, "writing register number %d", regno);
-                 perror_with_name (buf);
-               }
-           }
-        ptrace (6,inferior_pid,
-                (PTRACE_ARG3_TYPE) SXIP_OFFSET,read_register(SXIP_REGNUM));
-        ptrace (6,inferior_pid,
-                (PTRACE_ARG3_TYPE) SNIP_OFFSET,read_register(SNIP_REGNUM));
-        ptrace (6,inferior_pid,
-                (PTRACE_ARG3_TYPE) SFIP_OFFSET,read_register(SFIP_REGNUM));
-       }       
-           
-
-}
-
-#if 0
-/* Core files are now a function of BFD.  */
-\f
-void
-core_file_command (filename, from_tty)
-     char *filename;
-     int from_tty;
-{
-  int val;
-  extern char registers[];
-
-  /* Need symbol file and one with tdesc info for corefiles to work */
-  if (!have_symbol_file_p())
-    error ("Requires symbol-file and exec-file");
-  if (!execfile)
-    error ("Requires exec-file and symbol-file");
-
-  /* Discard all vestiges of any previous core file
-     and mark data and stack spaces as empty.  */
-
-  if (corefile)
-    free (corefile);
-  corefile = 0;
-
-  if (corechan >= 0)
-    close (corechan);
-  corechan = -1;
-
-  data_start = 0;
-  data_end = 0;
-  stack_start = STACK_END_ADDR;
-  stack_end = STACK_END_ADDR;
-
-  /* Now, if a new core file was specified, open it and digest it.  */
-
-  if (filename)
-    {
-      filename = tilde_expand (filename);
-      make_cleanup (free, filename);
-      
-      if (have_inferior_p ())
-       error ("To look at a core file, you must kill the inferior with \"kill\".");
-      corechan = open (filename, O_RDONLY, 0);
-      if (corechan < 0)
-       perror_with_name (filename);
-      /* 4.2-style (and perhaps also sysV-style) core dump file.  */
-      {
-       struct USER u;
-
-       int reg_offset;
-
-       val = myread (corechan, &u, sizeof u);
-       if (val < 0)
-         perror_with_name (filename);
-       data_start = u.pt_o_data_start;
-
-       data_end = data_start +  u.pt_dsize;
-       stack_start = stack_end -  u.pt_ssize;
-       data_offset = u.pt_dataptr;
-       stack_offset = data_offset + u.pt_dsize;
-
-#if defined(BCS)
-#if defined(DGUX)
-
-         reg_offset = 2048;
-
-
-#endif /* defined (DGUX) */
-#else
-
-       /* original code: */
-       reg_offset = (int) u.pt_r0 - KERNEL_U_ADDR;
-
-#endif /* defined(BCS) */
-
-       /* I don't know where to find this info.
-          So, for now, mark it as not available.  */
-/*     N_SET_MAGIC (core_aouthdr, 0);  */
-       bzero ((char *) &core_aouthdr, sizeof core_aouthdr);
-
-       /* Read the register values out of the core file and store
-          them where `read_register' will find them.  */
-
-       {
-         register int regno;
-
-         for (regno = 0; regno < NUM_REGS; regno++)
-           {
-             char buf[MAX_REGISTER_RAW_SIZE];
-
-             val = lseek (corechan, register_addr (regno, reg_offset), 0);
-             if (val < 0)
-               perror_with_name (filename);
-
-             val = myread (corechan, buf, sizeof buf);
-             if (val < 0)
-               perror_with_name (filename);
-             supply_register (regno, buf);
-           }
-       }
-      }
-      if (filename[0] == '/')
-       corefile = savestring (filename, strlen (filename));
-      else
-       {
-         corefile = concat (current_directory, "/", filename, NULL);
-       }
-      init_tdesc();
-      current_context = init_dcontext();
-      set_current_frame ( create_new_frame(get_frame_base (read_pc()), 
-                                           read_pc ()));
-      select_frame (get_current_frame (), 0);
-      validate_files ();
-    }
-  else if (from_tty)
-    printf ("No core file now.\n");
-}
-#endif
-\f
-/* blockend is the address of the end of the user structure */
-m88k_register_u_addr (blockend, regnum)
-{
-  struct USER u;
-  int ustart = blockend - sizeof (struct USER);
-  switch (regnum)
-    {
-    case 0:
-    case 1:
-    case 2:
-    case 3:
-    case 4:
-    case 5:
-    case 6:
-    case 7:
-    case 8:
-    case 9:
-    case 10:
-    case 11:
-    case 12:
-    case 13:
-    case 14:
-    case 15:
-    case 16:
-    case 17:
-    case 18:
-    case 19:
-    case 20:
-    case 21:
-    case 22:
-    case 23:
-    case 24:
-    case 25:
-    case 26:
-    case 27:
-    case 28:
-    case 29:
-    case 30:
-    case 31:          return (ustart + ((int) &u.pt_r0 - (int) &u) + sizeof(REGISTER_TYPE) * regnum);
-    case PSR_REGNUM:  return (ustart + ((int) &u.pt_psr - (int) &u));
-    case FPSR_REGNUM: return (ustart + ((int) &u.pt_fpsr - (int) &u));
-    case FPCR_REGNUM: return (ustart + ((int) &u.pt_fpcr - (int) &u));
-    case SXIP_REGNUM: return (ustart + SXIP_OFFSET); 
-    case SNIP_REGNUM: return (ustart + SNIP_OFFSET);
-    case SFIP_REGNUM: return (ustart + SFIP_OFFSET); 
-    default: return (blockend + sizeof (REGISTER_TYPE) * regnum);
-    }
-}
index 8f7ca16..e69de29 100644 (file)
@@ -1,164 +0,0 @@
-/* Machine-dependent code for host Mach 386's for GDB, the GNU debugger.
-   Copyright (C) 1986, 1987, 1989, 1991 Free Software Foundation, Inc.
-
-This file is part of GDB.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-#include "defs.h"
-#include "frame.h"
-#include "inferior.h"
-#include "gdbcore.h"
-
-#if defined (GDB_TARGET_IS_MACH386)
-
-#include <sys/param.h>
-#include <sys/dir.h>
-#include <sys/user.h>
-#include <signal.h>
-#include <sys/ioctl.h>
-#include <fcntl.h>
-
-#include <sys/ptrace.h>
-#include <machine/reg.h>
-
-#include <sys/file.h>
-#include <sys/stat.h>
-#include <sys/core.h>
-
-\f
-void
-fetch_inferior_registers (regno)
-     int regno;                /* Original value discarded */
-{
-  struct regs inferior_registers;
-  struct fp_state inferior_fp_registers;
-  extern char registers[];
-
-  registers_fetched ();
-
-  ptrace (PTRACE_GETREGS, inferior_pid,
-         (PTRACE_ARG3_TYPE) &inferior_registers);
-  ptrace (PTRACE_GETFPREGS, inferior_pid,
-         (PTRACE_ARG3_TYPE) &inferior_fp_registers);
-
-  bcopy (&inferior_registers, registers, sizeof inferior_registers);
-
-  bcopy (inferior_fp_registers.f_st,&registers[REGISTER_BYTE (FP0_REGNUM)],
-        sizeof inferior_fp_registers.f_st);
-  bcopy (&inferior_fp_registers.f_ctrl,
-        &registers[REGISTER_BYTE (FPC_REGNUM)],
-        sizeof inferior_fp_registers - sizeof inferior_fp_registers.f_st);
-}
-
-/* Store our register values back into the inferior.
-   If REGNO is -1, do this for all registers.
-   Otherwise, REGNO specifies which register (so we can save time).  */
-
-void
-store_inferior_registers (regno)
-     int regno;
-{
-  struct regs inferior_registers;
-  struct fp_state inferior_fp_registers;
-  extern char registers[];
-
-  bcopy (registers, &inferior_registers, 20 * 4);
-
-  bcopy (&registers[REGISTER_BYTE (FP0_REGNUM)],inferior_fp_registers.f_st,
-        sizeof inferior_fp_registers.f_st);
-  bcopy (&registers[REGISTER_BYTE (FPC_REGNUM)],
-        &inferior_fp_registers.f_ctrl,
-        sizeof inferior_fp_registers - sizeof inferior_fp_registers.f_st);
-  
-#ifdef PTRACE_FP_BUG
-  if (regno == FP_REGNUM || regno == -1)
-    /* Storing the frame pointer requires a gross hack, in which an
-       instruction that moves eax into ebp gets single-stepped.  */
-    {
-      int stack = inferior_registers.r_reg[SP_REGNUM];
-      int stuff = ptrace (PTRACE_PEEKDATA, inferior_pid,
-                         (PTRACE_ARG3_TYPE) stack);
-      int reg = inferior_registers.r_reg[EAX];
-      inferior_registers.r_reg[EAX] =
-       inferior_registers.r_reg[FP_REGNUM];
-      ptrace (PTRACE_SETREGS, inferior_pid,
-             (PTRACE_ARG3_TYPE) &inferior_registers);
-      ptrace (PTRACE_POKEDATA, inferior_pid, (PTRACE_ARG3_TYPE) stack, 0xc589);
-      ptrace (PTRACE_SINGLESTEP, inferior_pid, (PTRACE_ARG3_TYPE) stack, 0);
-      wait (0);
-      ptrace (PTRACE_POKEDATA, inferior_pid, (PTRACE_ARG3_TYPE) stack, stuff);
-      inferior_registers.r_reg[EAX] = reg;
-    }
-#endif
-  ptrace (PTRACE_SETREGS, inferior_pid,
-         (PTRACE_ARG3_TYPE) &inferior_registers);
-  ptrace (PTRACE_SETFPREGS, inferior_pid,
-         (PTRACE_ARG3_TYPE) &inferior_fp_registers);
-}
-
-#else /* Not mach386 target.  */
-
-/* These functions shouldn't be called when we're cross-debugging.  */
-
-/* ARGSUSED */
-void
-fetch_inferior_registers (regno)
-     int regno;
-{
-}
-
-/* ARGSUSED */
-void
-store_inferior_registers (regno)
-     int regno;
-{
-}
-
-#endif /* Not mach386 target.  */
-
-/* Work with core files, for GDB. */
-
-void
-fetch_core_registers (core_reg_sect, core_reg_size, which, reg_addr)
-     char *core_reg_sect;
-     unsigned core_reg_size;
-     int which;
-     unsigned int reg_addr;    /* Unused in this version */
-{
-  int val;
-  extern char registers[];
-
-  switch (which) {
-  case 0:
-  case 1:
-    bcopy (core_reg_sect, registers, core_reg_size);
-    break;
-
-  case 2:
-#ifdef FP0_REGNUM
-    bcopy (core_reg_sect,
-          &registers[REGISTER_BYTE (FP0_REGNUM)],
-          core_reg_size);              /* FIXME, probably bogus */
-#endif
-#ifdef FPC_REGNUM
-    bcopy (&corestr.c_fpu.f_fpstatus.f_ctrl,
-          &registers[REGISTER_BYTE (FPC_REGNUM)],
-          sizeof corestr.c_fpu.f_fpstatus -
-          sizeof corestr.c_fpu.f_fpstatus.f_st);
-#endif
-    break;
-  }
-}
diff --git a/gdb/mcheck.c b/gdb/mcheck.c
deleted file mode 100755 (executable)
index 38b997a..0000000
+++ /dev/null
@@ -1,124 +0,0 @@
-/* Standard debugging hooks for `malloc'.
-   Copyright 1990 Free Software Foundation
-                 Written May 1989 by Mike Haertel.
-
-   The author may be reached (Email) at the address mike@ai.mit.edu,
-   or (US mail) as Mike Haertel c/o Free Software Foundation.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-#include "ansidecl.h"
-#define size_t unsigned int
-#define ptrdiff_t int
-#define NULL 0
-#define __ONEFILE
-#include "gmalloc.h"
-
-/* Old hook values.  */
-static void EXFUN((*old_free_hook), (PTR ptr));
-static PTR EXFUN((*old_malloc_hook), (size_t size));
-static PTR EXFUN((*old_realloc_hook), (PTR ptr, size_t size));
-
-
-/* Function to call when something awful happens. */
-extern void abort();
-static void EXFUN((*abortfunc), (NOARGS)) = (void (*)()) abort;
-
-/* Arbitrary magical numbers.  */
-#define MAGICWORD      0xfedabeeb
-#define MAGICBYTE      ((char) 0xd7)
-
-struct hdr
-  {
-    size_t size;               /* Exact size requested by user.  */
-    unsigned int magic;                /* Magic number to check header integrity.  */
-  };
-
-static void
-DEFUN(checkhdr, (hdr), CONST struct hdr *hdr)
-{
-  if (hdr->magic != MAGICWORD || ((char *) &hdr[1])[hdr->size] != MAGICBYTE)
-    (*abortfunc)();
-}
-
-static void
-DEFUN(freehook, (ptr), PTR ptr)
-{
-  struct hdr *hdr = ((struct hdr *) ptr) - 1;
-  checkhdr(hdr);
-  hdr->magic = 0;
-  __free_hook = old_free_hook;
-  free(hdr);
-  __free_hook = freehook;
-}
-
-static PTR
-DEFUN(mallochook, (size), size_t size)
-{
-  struct hdr *hdr;
-
-  __malloc_hook = old_malloc_hook;
-  hdr = (struct hdr *) malloc(sizeof(struct hdr) + size + 1);
-  __malloc_hook = mallochook;
-  if (hdr == NULL)
-    return NULL;
-
-  hdr->size = size;
-  hdr->magic = MAGICWORD;
-  ((char *) &hdr[1])[size] = MAGICBYTE;
-  return (PTR) (hdr + 1);
-}
-
-static PTR
-DEFUN(reallochook, (ptr, size), PTR ptr AND size_t size)
-{
-  struct hdr *hdr = ((struct hdr *) ptr) - 1;
-
-  checkhdr(hdr);
-  __free_hook = old_free_hook;
-  __malloc_hook = old_malloc_hook;
-  __realloc_hook = old_realloc_hook;
-  hdr = (struct hdr *) realloc((PTR) hdr, sizeof(struct hdr) + size + 1);
-  __free_hook = freehook;
-  __malloc_hook = mallochook;
-  __realloc_hook = reallochook;
-  if (hdr == NULL)
-    return NULL;
-
-  hdr->size = size;
-  ((char *) &hdr[1])[size] = MAGICBYTE;
-  return (PTR) (hdr + 1);
-}
-
-void
-DEFUN(mcheck, (func), void EXFUN((*func), (NOARGS)))
-{
-  static int mcheck_used = 0;
-
-  if (func)
-    abortfunc = func;
-
-  /* These hooks may not be safely inserted if malloc is already in use.  */
-  if (!__malloc_initialized && !mcheck_used)
-    {
-      old_free_hook = __free_hook;
-      __free_hook = freehook;
-      old_malloc_hook = __malloc_hook;
-      __malloc_hook = mallochook;
-      old_realloc_hook = __realloc_hook;
-      __realloc_hook = reallochook;
-      mcheck_used = 1;
-    }
-}
diff --git a/gdb/mips-opcode.h b/gdb/mips-opcode.h
deleted file mode 100755 (executable)
index f75d34e..0000000
+++ /dev/null
@@ -1,363 +0,0 @@
-/* Mips opcde list for GDB, the GNU debugger.
-   Copyright (C) 1989 Free Software Foundation, Inc.
-   Contributed by Nobuyuki Hikichi(hikichi@sra.junet)
-   Made to work for little-endian machines, and debugged
-   by Per Bothner (bothner@cs.wisc.edu).
-   Many fixes contributed by Frank Yellin (fy@lucid.com).
-
-This file is part of GDB.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-#if BITS_BIG_ENDIAN
-#define BIT_FIELDS_2(a,b) a;b;
-#define BIT_FIELDS_4(a,b,c,d) a;b;c;d;
-#define BIT_FIELDS_6(a,b,c,d,e,f) a;b;c;d;e;f;
-#else
-#define BIT_FIELDS_2(a,b) b;a;
-#define BIT_FIELDS_4(a,b,c,d) d;c;b;a;
-#define BIT_FIELDS_6(a,b,c,d,e,f) f;e;d;c;b;a;
-#endif
-
-struct op_i_fmt
-{
-BIT_FIELDS_4(
-  unsigned op : 6,
-  unsigned rs : 5,
-  unsigned rt : 5,
-  unsigned immediate : 16)
-};
-
-struct op_j_fmt
-{
-BIT_FIELDS_2(
-  unsigned op : 6,
-  unsigned target : 26)
-};
-
-struct op_r_fmt
-{
-BIT_FIELDS_6(
-  unsigned op : 6,
-  unsigned rs : 5,
-  unsigned rt : 5,
-  unsigned rd : 5,
-  unsigned shamt : 5,
-  unsigned funct : 6)
-};
-
-
-struct fop_i_fmt
-{
-BIT_FIELDS_4(
-  unsigned op : 6,
-  unsigned rs : 5,
-  unsigned rt : 5,
-  unsigned immediate : 16)
-};
-
-struct op_b_fmt
-{
-BIT_FIELDS_4(
-  unsigned op : 6,
-  unsigned rs : 5,
-  unsigned rt : 5,
-  short delta : 16)
-};
-
-struct fop_r_fmt
-{
-BIT_FIELDS_6(
-  unsigned op : 6,
-  unsigned fmt : 5,
-  unsigned ft : 5,
-  unsigned fs : 5,
-  unsigned fd : 5,
-  unsigned funct : 6)
-};
-
-struct mips_opcode
-{
-  char *name;
-  unsigned long opcode;
-  unsigned long match;
-  char *args;
-  int bdelay; /* Nonzero if delayed branch.  */
-};
-
-/* args format;
-
-   "s" rs: source register specifier
-   "t" rt: target register
-   "i" immediate
-   "a" target address
-   "c" branch condition
-   "d" rd: destination register specifier
-   "h" shamt: shift amount
-   "f" funct: function field
-
-  for fpu
-   "S" fs source 1 register
-   "T" ft source 2 register
-   "D" distination register
-*/
-
-#define one(x) (x << 26)
-#define op_func(x, y) ((x << 26) | y)
-#define op_cond(x, y) ((x << 26) | (y << 16))
-#define op_rs_func(x, y, z) ((x << 26) | (y << 21) | z)
-#define op_rs_b11(x, y, z) ((x << 26) | (y << 21) | z)
-#define op_o16(x, y) ((x << 26) | (y << 16))
-#define op_bc(x, y, z) ((x << 26) | (y << 21) | (z << 16))
-
-struct mips_opcode mips_opcodes[] = 
-{
-/* These first opcodes are special cases of the ones in the comments */
-  {"nop",      0,              0xffffffff,          /*li*/     "", 0},
-  {"li",       op_bc(9,0,0),   op_bc(0x3f,31,0),    /*addiu*/  "t,j", 0},
-  {"b",                one(4),         0xffff0000,          /*beq*/    "b", 1},
-  {"move",     op_func(0, 33), op_cond(0x3f,31)|0x7ff,/*addu*/ "d,s", 0},
-
-  {"sll",      op_func(0, 0),  op_func(0x3f, 0x3f),            "d,t,h", 0},
-  {"srl",      op_func(0, 2),  op_func(0x3f, 0x3f),            "d,t,h", 0},
-  {"sra",      op_func(0, 3),  op_func(0x3f, 0x3f),            "d,t,h", 0},
-  {"sllv",     op_func(0, 4),  op_func(0x3f, 0x7ff),           "d,t,s", 0},
-  {"srlv",     op_func(0, 6),  op_func(0x3f, 0x7ff),           "d,t,s", 0},
-  {"srav",     op_func(0, 7),  op_func(0x3f, 0x7ff),           "d,t,s", 0},
-  {"jr",       op_func(0, 8),  op_func(0x3f, 0x1fffff),        "s", 1},
-  {"jalr",     op_func(0, 9),  op_func(0x3f, 0x1f07ff),        "d,s", 1},
-  {"syscall",  op_func(0, 12), op_func(0x3f, 0x3f),            "", 0},
-  {"break",    op_func(0, 13), op_func(0x3f, 0x3f),            "", 0},
-  {"mfhi",      op_func(0, 16), op_func(0x3f, 0x03ff07ff),      "d", 0},
-  {"mthi",      op_func(0, 17), op_func(0x3f, 0x1fffff),        "s", 0},
-  {"mflo",      op_func(0, 18), op_func(0x3f, 0x03ff07ff),      "d", 0},
-  {"mtlo",      op_func(0, 19), op_func(0x3f, 0x1fffff),        "s", 0},
-  {"mult",     op_func(0, 24), op_func(0x3f, 0xffff),          "s,t", 0},
-  {"multu",    op_func(0, 25), op_func(0x3f, 0xffff),          "s,t", 0},
-  {"div",      op_func(0, 26), op_func(0x3f, 0xffff),          "s,t", 0},
-  {"divu",     op_func(0, 27), op_func(0x3f, 0xffff),          "s,t", 0},
-  {"add",      op_func(0, 32), op_func(0x3f, 0x7ff),           "d,s,t", 0},
-  {"addu",     op_func(0, 33), op_func(0x3f, 0x7ff),           "d,s,t", 0},
-  {"sub",      op_func(0, 34), op_func(0x3f, 0x7ff),           "d,s,t", 0},
-  {"subu",     op_func(0, 35), op_func(0x3f, 0x7ff),           "d,s,t", 0},
-  {"and",      op_func(0, 36), op_func(0x3f, 0x7ff),           "d,s,t", 0},
-  {"or",       op_func(0, 37), op_func(0x3f, 0x7ff),           "d,s,t", 0},
-  {"xor",      op_func(0, 38), op_func(0x3f, 0x7ff),           "d,s,t", 0},
-  {"nor",      op_func(0, 39), op_func(0x3f, 0x7ff),           "d,s,t", 0},
-  {"slt",      op_func(0, 42), op_func(0x3f, 0x7ff),           "d,s,t", 0},
-  {"sltu",     op_func(0, 43), op_func(0x3f, 0x7ff),           "d,s,t", 0},
-
-  {"bltz",     op_cond (1, 0), op_cond(0x3f, 0x1f),            "s,b", 1},
-  {"bgez",     op_cond (1, 1), op_cond(0x3f, 0x1f),            "s,b", 1},
-  {"bltzal",   op_cond (1, 16),op_cond(0x3f, 0x1f),            "s,b", 1},
-  {"bgezal",   op_cond (1, 17),op_cond(0x3f, 0x1f),            "s,b", 1},
-
-
-  {"j",                one(2),         one(0x3f),                      "a", 1},
-  {"jal",      one(3),         one(0x3f),                      "a", 1},
-  {"beq",      one(4),         one(0x3f),                      "s,t,b", 1},
-  {"bne",      one(5),         one(0x3f),                      "s,t,b", 1},
-  {"blez",     one(6),         one(0x3f) | 0x1f0000,           "s,b", 1},
-  {"bgtz",     one(7),         one(0x3f) | 0x1f0000,           "s,b", 1},
-  {"addi",     one(8),         one(0x3f),                      "t,s,j", 0},
-  {"addiu",    one(9),         one(0x3f),                      "t,s,j", 0},
-  {"slti",     one(10),        one(0x3f),                      "t,s,j", 0},
-  {"sltiu",    one(11),        one(0x3f),                      "t,s,j", 0},
-  {"andi",     one(12),        one(0x3f),                      "t,s,i", 0},
-  {"ori",      one(13),        one(0x3f),                      "t,s,i", 0},
-  {"xori",     one(14),        one(0x3f),                      "t,s,i", 0},
-       /* rs field is don't care field? */
-  {"lui",      one(15),        one(0x3f),                      "t,i", 0},
-
-/* co processor 0 instruction */
-  {"mfc0",     op_rs_b11 (16, 0, 0),   op_rs_b11(0x3f, 0x1f, 0x1ffff), "t,d", 0},
-  {"cfc0",     op_rs_b11 (16, 2, 0),   op_rs_b11(0x3f, 0x1f, 0x1ffff), "t,d", 0},
-  {"mtc0",     op_rs_b11 (16, 4, 0),   op_rs_b11(0x3f, 0x1f, 0x1ffff), "t,d", 0},
-  {"ctc0",     op_rs_b11 (16, 6, 0),   op_rs_b11(0x3f, 0x1f, 0x1ffff), "t,d", 0},
-
-  {"bc0f",     op_o16(16, 0x100),      op_o16(0x3f, 0x3ff),    "b", 1},
-  {"bc0f",     op_o16(16, 0x180),      op_o16(0x3f, 0x3ff),    "b", 1},
-  {"bc0t",     op_o16(16, 0x101),      op_o16(0x3f, 0x3ff),    "b", 1},
-  {"bc0t",     op_o16(16, 0x181),      op_o16(0x3f, 0x3ff),    "b", 1},
-
-  {"tlbr",     op_rs_func(16, 0x10, 1), ~0, "", 0},
-  {"tlbwi",    op_rs_func(16, 0x10, 2), ~0, "", 0},
-  {"tlbwr",    op_rs_func(16, 0x10, 6), ~0, "", 0},
-  {"tlbp",     op_rs_func(16, 0x10, 8), ~0, "", 0},
-  {"rfe",      op_rs_func(16, 0x10, 16), ~0, "", 0},
-
-  {"mfc1",     op_rs_b11 (17, 0, 0),   op_rs_b11(0x3f, 0x1f, 0),"t,S", 0},
-  {"cfc1",     op_rs_b11 (17, 2, 0),   op_rs_b11(0x3f, 0x1f, 0),"t,S", 0},
-  {"mtc1",     op_rs_b11 (17, 4, 0),   op_rs_b11(0x3f, 0x1f, 0),"t,S", 0},
-  {"ctc1",     op_rs_b11 (17, 6, 0),   op_rs_b11(0x3f, 0x1f, 0),"t,S", 0},
-
-  {"bc1f",     op_o16(17, 0x100),      op_o16(0x3f, 0x3ff),    "b", 1},
-  {"bc1f",     op_o16(17, 0x180),      op_o16(0x3f, 0x3ff),    "b", 1},
-  {"bc1t",     op_o16(17, 0x101),      op_o16(0x3f, 0x3ff),    "b", 1},
-  {"bc1t",     op_o16(17, 0x181),      op_o16(0x3f, 0x3ff),    "b", 1},
-
-/* fpu instruction */
-  {"add.s",    op_rs_func(17, 0x10, 0),
-                       op_rs_func(0x3f, 0x1f, 0x3f),   "D,S,T", 0},
-  {"add.d",    op_rs_func(17, 0x11, 0),
-                       op_rs_func(0x3f, 0x1f, 0x3f),   "D,S,T", 0},
-  {"sub.s",    op_rs_func(17, 0x10, 1),
-                       op_rs_func(0x3f, 0x1f, 0x3f),   "D,S,T", 0},
-  {"sub.d",    op_rs_func(17, 0x11, 1),
-                       op_rs_func(0x3f, 0x1f, 0x3f),   "D,S,T", 0},
-  {"mul.s",    op_rs_func(17, 0x10, 2),
-                       op_rs_func(0x3f, 0x1f, 0x3f),   "D,S,T", 0},
-  {"mul.d",    op_rs_func(17, 0x11, 2),
-                       op_rs_func(0x3f, 0x1f, 0x3f),   "D,S,T", 0},
-  {"div.s",    op_rs_func(17, 0x10, 3),
-                       op_rs_func(0x3f, 0x1f, 0x3f),   "D,S,T", 0},
-  {"div.d",    op_rs_func(17, 0x11, 3),
-                       op_rs_func(0x3f, 0x1f, 0x3f),   "D,S,T", 0},
-  {"abs.s",    op_rs_func(17, 0x10, 5),
-                       op_rs_func(0x3f, 0x1f, 0x1f003f),       "D,S", 0},
-  {"abs.d",    op_rs_func(17, 0x11, 5),
-                       op_rs_func(0x3f, 0x1f, 0x1f003f),       "D,S", 0},
-  {"mov.s",    op_rs_func(17, 0x10, 6),
-                       op_rs_func(0x3f, 0x1f, 0x1f003f),       "D,S", 0},
-  {"mov.d",    op_rs_func(17, 0x11, 6),
-                       op_rs_func(0x3f, 0x1f, 0x1f003f),       "D,S", 0},
-  {"neg.s",    op_rs_func(17, 0x10, 7),
-                       op_rs_func(0x3f, 0x1f, 0x1f003f),       "D,S", 0},
-  {"neg.d",    op_rs_func(17, 0x11, 7),
-                       op_rs_func(0x3f, 0x1f, 0x1f003f),       "D,S", 0},
-  {"cvt.s.s",  op_rs_func(17, 0x10, 32),
-                       op_rs_func(0x3f, 0x1f, 0x1f003f),       "D,S", 0},
-  {"cvt.s.d",  op_rs_func(17, 0x11, 32),
-                       op_rs_func(0x3f, 0x1f, 0x1f003f),       "D,S", 0},
-  {"cvt.s.w",  op_rs_func(17, 0x14, 32),
-                       op_rs_func(0x3f, 0x1f, 0x1f003f),       "D,S", 0},
-  {"cvt.d.s",  op_rs_func(17, 0x10, 33),
-                       op_rs_func(0x3f, 0x1f, 0x1f003f),       "D,S", 0},
-  {"cvt.d.d",  op_rs_func(17, 0x11, 33),
-                       op_rs_func(0x3f, 0x1f, 0x1f003f),       "D,S", 0},
-  {"cvt.d.w",  op_rs_func(17, 0x14, 33),
-                       op_rs_func(0x3f, 0x1f, 0x1f003f),       "D,S", 0},
-  {"cvt.w.s",  op_rs_func(17, 0x10, 36),
-                       op_rs_func(0x3f, 0x1f, 0x1f003f),       "D,S", 0},
-  {"cvt.w.d",  op_rs_func(17, 0x11, 36),
-                       op_rs_func(0x3f, 0x1f, 0x1f003f),       "D,S", 0},
-  {"c.f.s",    op_rs_func(17, 0x10, 48),
-                       op_rs_func(0x3f, 0x1f, 0x7ff),  "S,T", 0},
-  {"c.f.d",    op_rs_func(17, 0x11, 48),
-                       op_rs_func(0x3f, 0x1f, 0x7ff),  "S,T", 0},
-  {"c.un.s",   op_rs_func(17, 0x10, 49),
-                       op_rs_func(0x3f, 0x1f, 0x7ff),  "S,T", 0},
-  {"c.un.d",   op_rs_func(17, 0x11, 49),
-                       op_rs_func(0x3f, 0x1f, 0x7ff),  "S,T", 0},
-  {"c.eq.s",   op_rs_func(17, 0x10, 50),
-                       op_rs_func(0x3f, 0x1f, 0x7ff),  "S,T", 0},
-  {"c.eq.d",   op_rs_func(17, 0x11, 50),
-                       op_rs_func(0x3f, 0x1f, 0x7ff),  "S,T", 0},
-  {"c.ueq.s",  op_rs_func(17, 0x10, 51),
-                       op_rs_func(0x3f, 0x1f, 0x7ff),  "S,T", 0},
-  {"c.ueq.d",  op_rs_func(17, 0x11, 51),
-                       op_rs_func(0x3f, 0x1f, 0x7ff),  "S,T", 0},
-  {"c.olt.s",  op_rs_func(17, 0x10, 52),
-                       op_rs_func(0x3f, 0x1f, 0x7ff),  "S,T", 0},
-  {"c.olt.d",  op_rs_func(17, 0x11, 52),
-                       op_rs_func(0x3f, 0x1f, 0x7ff),  "S,T", 0},
-  {"c.ult.s",  op_rs_func(17, 0x10, 53),
-                       op_rs_func(0x3f, 0x1f, 0x7ff),  "S,T", 0},
-  {"c.ult.d",  op_rs_func(17, 0x11, 53),
-                       op_rs_func(0x3f, 0x1f, 0x7ff),  "S,T", 0},
-  {"c.ole.s",  op_rs_func(17, 0x10, 54),
-                       op_rs_func(0x3f, 0x1f, 0x7ff),  "S,T", 0},
-  {"c.ole.d",  op_rs_func(17, 0x11, 54),
-                       op_rs_func(0x3f, 0x1f, 0x7ff),  "S,T", 0},
-  {"c.ule.s",  op_rs_func(17, 0x10, 55),
-                       op_rs_func(0x3f, 0x1f, 0x7ff),  "S,T", 0},
-  {"c.ule.d",  op_rs_func(17, 0x11, 55),
-                       op_rs_func(0x3f, 0x1f, 0x7ff),  "S,T", 0},
-  {"c.sf.s",   op_rs_func(17, 0x10, 56),
-                       op_rs_func(0x3f, 0x1f, 0x7ff),  "S,T", 0},
-  {"c.sf.d",   op_rs_func(17, 0x11, 56),
-                       op_rs_func(0x3f, 0x1f, 0x7ff),  "S,T", 0},
-  {"c.ngle.s", op_rs_func(17, 0x10, 57),
-                       op_rs_func(0x3f, 0x1f, 0x7ff),  "S,T", 0},
-  {"c.ngle.d", op_rs_func(17, 0x11, 57),
-                       op_rs_func(0x3f, 0x1f, 0x7ff),  "S,T", 0},
-  {"c.seq.s",  op_rs_func(17, 0x10, 58),
-                       op_rs_func(0x3f, 0x1f, 0x7ff),  "S,T", 0},
-  {"c.seq.d",  op_rs_func(17, 0x11, 58),
-                       op_rs_func(0x3f, 0x1f, 0x7ff),  "S,T", 0},
-  {"c.ngl.s",  op_rs_func(17, 0x10, 59),
-                       op_rs_func(0x3f, 0x1f, 0x7ff),  "S,T", 0},
-  {"c.ngl.d",  op_rs_func(17, 0x11, 59),
-                       op_rs_func(0x3f, 0x1f, 0x7ff),  "S,T", 0},
-  {"c.lt.s",   op_rs_func(17, 0x10, 60),
-                       op_rs_func(0x3f, 0x1f, 0x7ff),  "S,T", 0},
-  {"c.lt.d",   op_rs_func(17, 0x11, 60),
-                       op_rs_func(0x3f, 0x1f, 0x7ff),  "S,T", 0},
-  {"c.nge.s",  op_rs_func(17, 0x10, 61),
-                       op_rs_func(0x3f, 0x1f, 0x7ff),  "S,T", 0},
-  {"c.nge.d",  op_rs_func(17, 0x11, 61),
-                       op_rs_func(0x3f, 0x1f, 0x7ff),  "S,T", 0},
-  {"c.le.s",   op_rs_func(17, 0x10, 62),
-                       op_rs_func(0x3f, 0x1f, 0x7ff),  "S,T", 0},
-  {"c.le.d",   op_rs_func(17, 0x11, 62),
-                       op_rs_func(0x3f, 0x1f, 0x7ff),  "S,T", 0},
-  {"c.ngt.s",  op_rs_func(17, 0x10, 63),
-                       op_rs_func(0x3f, 0x1f, 0x7ff),  "S,T", 0},
-  {"c.ngt.d",  op_rs_func(17, 0x11, 63),
-                       op_rs_func(0x3f, 0x1f, 0x7ff),  "S,T", 0},
-
-/* co processor 2 instruction */
-  {"mfc2",     op_rs_b11 (18, 0, 0),   op_rs_b11(0x3f, 0x1f, 0x1ffff), "t,d", 0},
-  {"cfc2",     op_rs_b11 (18, 2, 0),   op_rs_b11(0x3f, 0x1f, 0x1ffff), "t,d", 0},
-  {"mtc2",     op_rs_b11 (18, 4, 0),   op_rs_b11(0x3f, 0x1f, 0x1ffff), "t,d", 0},
-  {"ctc2",     op_rs_b11 (18, 6, 0),   op_rs_b11(0x3f, 0x1f, 0x1ffff), "t,d", 0},
-  {"bc2f",     op_o16(18, 0x100),      op_o16(0x3f, 0x3ff),    "b", 1},
-  {"bc2f",     op_o16(18, 0x180),      op_o16(0x3f, 0x3ff),    "b", 1},
-  {"bc2f",     op_o16(18, 0x101),      op_o16(0x3f, 0x3ff),    "b", 1},
-  {"bc2t",     op_o16(18, 0x181),      op_o16(0x3f, 0x3ff),    "b", 1},
-
-/* co processor 3 instruction */
-  {"mtc3",     op_rs_b11 (19, 0, 0),   op_rs_b11(0x3f, 0x1f, 0x1ffff), "t,d", 0},
-  {"cfc3",     op_rs_b11 (19, 2, 0),   op_rs_b11(0x3f, 0x1f, 0x1ffff), "t,d", 0},
-  {"mtc3",     op_rs_b11 (19, 4, 0),   op_rs_b11(0x3f, 0x1f, 0x1ffff), "t,d", 0},
-  {"ctc3",     op_rs_b11 (19, 6, 0),   op_rs_b11(0x3f, 0x1f, 0x1ffff), "t,d", 0},
-  {"bc3f",     op_o16(19, 0x100),      op_o16(0x3f, 0x3ff),    "b", 1},
-  {"bc3f",     op_o16(19, 0x180),      op_o16(0x3f, 0x3ff),    "b", 1},
-  {"bc3t",     op_o16(19, 0x101),      op_o16(0x3f, 0x3ff),    "b", 1},
-  {"bc3t",     op_o16(19, 0x181),      op_o16(0x3f, 0x3ff),    "b", 1},
-
-  {"lb",       one(32),        one(0x3f),              "t,j(s)", 0},
-  {"lh",       one(33),        one(0x3f),              "t,j(s)", 0},
-  {"lwl",      one(34),        one(0x3f),              "t,j(s)", 0},
-  {"lw",       one(35),        one(0x3f),              "t,j(s)", 0},
-  {"lbu",      one(36),        one(0x3f),              "t,j(s)", 0},
-  {"lhu",      one(37),        one(0x3f),              "t,j(s)", 0},
-  {"lwr",      one(38),        one(0x3f),              "t,j(s)", 0},
-  {"sb",       one(40),        one(0x3f),              "t,j(s)", 0},
-  {"sh",       one(41),        one(0x3f),              "t,j(s)", 0},
-  {"swl",      one(42),        one(0x3f),              "t,j(s)", 0},
-  {"swr",       one(46),        one(0x3f),              "t,j(s)", 0},
-  {"sw",       one(43),        one(0x3f),              "t,j(s)", 0},
-  {"lwc0",     one(48),        one(0x3f),              "t,j(s)", 0},
-/* for fpu */
-  {"lwc1",     one(49),        one(0x3f),              "T,j(s)", 0},
-  {"lwc2",     one(50),        one(0x3f),              "t,j(s)", 0},
-  {"lwc3",     one(51),        one(0x3f),              "t,j(s)", 0},
-  {"swc0",     one(56),        one(0x3f),              "t,j(s)", 0},
-/* for fpu */
-  {"swc1",     one(57),        one(0x3f),              "T,j(s)", 0},
-  {"swc2",     one(58),        one(0x3f),              "t,j(s)", 0},
-  {"swc3",     one(59),        one(0x3f),              "t,j(s)", 0},
-};
diff --git a/gdb/mips-xdep.c b/gdb/mips-xdep.c
deleted file mode 100644 (file)
index e314bf7..0000000
+++ /dev/null
@@ -1,163 +0,0 @@
-/* Low level MIPS interface to ptrace, for GDB when running under Unix.
-   Copyright 1988, 1989, 1991, 1992 Free Software Foundation, Inc.
-   Contributed by Alessandro Forin(af@cs.cmu.edu) at CMU
-   and by Per Bothner(bothner@cs.wisc.edu) at U.Wisconsin.
-
-This file is part of GDB.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-#include "defs.h"
-#include "inferior.h"
-#include "gdbcore.h"
-
-/* For now we stub this out; sgi core format is super-hairy (and completely
-   different in the new release).
-   For most mips systems, this function is defined in coredep.c.   */
-
-#if defined(sgi) 
-void
-fetch_core_registers (core_reg_sect, core_reg_size, which, reg_addr)
-     char *core_reg_sect;
-     unsigned core_reg_size;
-     int which;
-     unsigned int reg_addr;
-{
-  return;
-}
-#endif
-
-/* Access to the inferior is only good for native systems, not cross.
-   I am not sure why this is stubbed out on SGI...   --gnu@cygnus.com  */
-
-#if defined(sgi) || !defined(GDB_TARGET_IS_MIPS)
-
-/* ARGSUSED */
-void
-fetch_inferior_registers (regno)
-     int regno;
-{
-  return;
-}
-
-/* ARGSUSED */
-void
-store_inferior_registers (regno)
-     int regno;
-{
-  return;
-}
-
-
-#else
-
-/* DECstation native... */
-
-#include <sys/ptrace.h>
-
-/* Map gdb internal register number to ptrace ``address''.
-   These ``addresses'' are defined in DECstation <sys/ptrace.h> */
-
-#define REGISTER_PTRACE_ADDR(regno) \
-   (regno < 32 ?               GPR_BASE + regno \
-  : regno == PC_REGNUM ?       PC      \
-  : regno == CAUSE_REGNUM ?    CAUSE   \
-  : regno == HI_REGNUM ?       MMHI    \
-  : regno == LO_REGNUM ?       MMLO    \
-  : regno == FCRCS_REGNUM ?    FPC_CSR \
-  : regno == FCRIR_REGNUM ?    FPC_EIR \
-  : regno >= FP0_REGNUM ?      FPR_BASE + (regno - FP0_REGNUM) \
-  : 0)
-
-static const char zerobuf[MAX_REGISTER_RAW_SIZE];
-
-/* Get all registers from the inferior */
-
-void
-fetch_inferior_registers (regno)
-     int regno;
-{
-  register unsigned int regaddr;
-  char buf[MAX_REGISTER_RAW_SIZE];
-  register int i;
-
-  registers_fetched ();
-
-  for (regno = 1; regno < NUM_REGS; regno++)
-    {
-      regaddr = REGISTER_PTRACE_ADDR (regno);
-      for (i = 0; i < REGISTER_RAW_SIZE (regno); i += sizeof (int))
-       {
-         *(int *) &buf[i] = ptrace (PT_READ_U, inferior_pid,
-                                    (PTRACE_ARG3_TYPE) regaddr, 0);
-         regaddr += sizeof (int);
-       }
-      supply_register (regno, buf);
-    }
-
-  supply_register (ZERO_REGNUM, zerobuf);
-  /* Frame ptr reg must appear to be 0; it is faked by stack handling code. */
-  supply_register (FP_REGNUM, zerobuf);
-}
-
-/* Store our register values back into the inferior.
-   If REGNO is -1, do this for all registers.
-   Otherwise, REGNO specifies which register (so we can save time).  */
-
-void
-store_inferior_registers (regno)
-     int regno;
- {
-  register unsigned int regaddr;
-  char buf[80];
-
-  if (regno == 0)
-    return;
-
-  if (regno > 0)
-    {
-      regaddr = REGISTER_PTRACE_ADDR (regno);
-      errno = 0;
-      ptrace (PT_WRITE_U, inferior_pid, (PTRACE_ARG3_TYPE) regaddr,
-             read_register (regno));
-      if (errno != 0)
-       {
-         sprintf (buf, "writing register number %d", regno);
-         perror_with_name (buf);
-       }
-    }
-  else
-    {
-      for (regno = 0; regno < NUM_REGS; regno++)
-       {
-         if (regno == ZERO_REGNUM || regno == PS_REGNUM
-             || regno == BADVADDR_REGNUM || regno == CAUSE_REGNUM
-             || regno == FCRIR_REGNUM || regno == FP_REGNUM
-             || (regno >= FIRST_EMBED_REGNUM && regno <= LAST_EMBED_REGNUM))
-           continue;
-         regaddr = register_addr (regno, 1);
-         errno = 0;
-         ptrace (6, inferior_pid, (PTRACE_ARG3_TYPE) regaddr,
-                 read_register (regno));
-         if (errno != 0)
-           {
-             sprintf (buf, "writing all regs, number %d", regno);
-             perror_with_name (buf);
-           }
-       }
-    }
-}
-
-#endif /* sgi */
index d1ac6e4..e69de29 100755 (executable)
@@ -1,159 +0,0 @@
-/* GDB support for special malloc using mmap.
-   Copyright 1992 Free Software Foundation, Inc.
-   Contributed by Cygnus Support, using pieces from other GDB modules.
-
-This file is part of GDB.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-#include "defs.h"
-
-#if defined (HAVE_MMAP)
-
-/* Redefine the external visible symbols in gmalloc.c to be mmap versions */
-
-#define free                   _mmap_free
-#define malloc                 _mmap_malloc
-#define realloc                        _mmap_realloc
-#define valloc                 _mmap_valloc
-
-#define _bytes_free            _mmap__bytes_free
-#define _bytes_used            _mmap__bytes_used
-#define _chunks_free           _mmap__chunks_free
-#define _chunks_used           _mmap__chunks_used
-#define _fraghead              _mmap__fraghead
-#define _heapbase              _mmap__heapbase
-#define _heapindex             _mmap__heapindex
-#define _heapinfo              _mmap__heapinfo
-#define _heaplimit             _mmap__heaplimit
-
-#define __default_morecore     _mmap___default_morecore
-#define __free                 _mmap___free
-#define __free_hook            _mmap___free_hook
-#define __malloc_hook          _mmap___malloc_hook
-#define __malloc_initialized   _mmap___malloc_initialized
-#define __morecore             _mmap___morecore
-#define __realloc_hook         _mmap___realloc_hook
-
-/* Arrange that instead of calling sbrk() we call mmap_sbrk() */
-
-#define sbrk                   mmap_sbrk
-
-/* Now simply include the standard GNU malloc source, and all the
-   externally visible symbols will become _mmap_* versions, and
-   _mmap_sbrk will be called to get more core instead of sbrk. */
-
-#include "gmalloc.c"
-
-/* Like mmap_malloc but get error if no storage available.  */
-
-PTR
-mmap_xmalloc (size)
-     long size;
-{
-  register char *val = NULL;
-
-  /* Protect against gdb wanting to allocate zero bytes. */
-
-  if (size > 0)
-    {
-      if ((val = (char *) _mmap_malloc (size)) == NULL)
-       {
-         fatal ("virtual memory exhausted.", 0);
-       }
-    }
-  return (val);
-}
-
-/* Like mmap_realloc but get error if no storage available.  */
-
-PTR
-mmap_xrealloc (ptr, size)
-     PTR ptr;
-     long size;
-{
-  register char *val;
-
-  if ((val = (char *) _mmap_realloc (ptr, size)) == NULL)
-    {
-      fatal ("virtual memory exhausted.", 0);
-    }
-  return (val);
-}
-
-PTR
-mmap_malloc (size)
-     long size;
-{
-  return (_mmap_malloc (size));
-}
-
-PTR
-mmap_realloc (ptr, size)
-     PTR ptr;
-     long size;
-{
-  return (_mmap_realloc (ptr, size));
-}
-
-void
-mmap_free (ptr)
-     PTR ptr;
-{
-  _mmap_free (ptr);
-}
-
-#else  /* !defined (HAVE_MMAP) */
-
-static char *errmsg = "This version of gdb does not support dumpable state.";
-
-PTR
-mmap_malloc (size)
-     long size;
-{
-  error (errmsg);
-}
-
-PTR
-mmap_xmalloc (size)
-     long size;
-{
-  error (errmsg);
-}
-
-PTR
-mmap_realloc (ptr, size)
-     PTR ptr;
-     long size;
-{
-  error (errmsg);
-}
-
-PTR
-mmap_xrealloc (ptr, size)
-     PTR ptr;
-     long size;
-{
-  error (errmsg);
-}
-
-void
-mmap_free (ptr)
-     PTR ptr;
-{
-  error (errmsg);
-}
-
-#endif /* HAVE_MMAP */
index 2622845..e69de29 100755 (executable)
@@ -1,144 +0,0 @@
-/* GDB support for an sbrk-like function that uses mmap.
-   Copyright 1992 Free Software Foundation, Inc.
-   Contributed by Cygnus Support, using pieces from other GDB modules.
-
-This file is part of GDB.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-#include "defs.h"
-
-#ifdef HAVE_MMAP
-
-#include <fcntl.h>
-#include <sys/mman.h>
-
-#ifdef i386
-#define MMAP_BASE ((caddr_t) 0x81000000)
-#define MMAP_PGSZ 0x00002000  /* Must be multiple of real page size */
-#else
-#define MMAP_BASE ((caddr_t) 0xC2000000)
-#define MMAP_PGSZ 0x00002000  /* Must be multiple of real page size */
-#endif
-
-#define PAGE_ALIGN(addr) (caddr_t) (((long)(addr) + MMAP_PGSZ - 1) & \
-                                   ~(MMAP_PGSZ - 1))
-
-static caddr_t mbase = MMAP_BASE;      /* Current base of mmap'd region */
-static caddr_t mbreak = MMAP_BASE;     /* Current "break" address */
-static caddr_t mtop = MMAP_BASE;       /* Current top of mmap'd region */
-
-static int fd = -1;                    /* Open fd for /dev/zero */
-
-
-/*  Provide a utility routine for other modules to obtain compatible
-    page alignment. */
-
-PTR
-mmap_page_align (addr)
-     PTR addr;
-{
-  return (PAGE_ALIGN (addr));
-}
-
-/*  Return the base address of the start of the mmap'd region.  Note that
-    we can find the end of the region at anytime by calling mmap_sbrk(0) */
-
-PTR
-mmap_base ()
-{
-  return (mbase);
-}
-
-/*  Works like sbrk(), but uses mmap to add to or subtract from a
-    memory region. */
-
-PTR
-mmap_sbrk (size)
-     int size;
-{
-  PTR result = NULL;
-  int minc;
-  caddr_t moveto;
-
-  if (size == 0)
-    {
-      /* Just return the current "break" value. */
-      result = mbreak;
-    }
-  else if (size < 0)
-    {
-      /* We are deallocating memory.  If the amount requested would cause
-        us to try to deallocate back past the base of the mmap'd region
-        then do nothing, and return NULL.  Otherwise, deallocate the
-        memory and return the old break value. */
-      if (mbreak + size >= mbase)
-       {
-         result = (PTR) mbreak;
-         mbreak += size;
-         moveto = PAGE_ALIGN (mbreak);
-         munmap (moveto, (size_t) (mtop - moveto));
-         mtop = moveto;
-       }
-    }
-  else
-    {
-      /* We are allocating memory.  Make sure we have an open file
-        descriptor and then go on to get the memory. */
-      if ((fd == -1) && (fd = open ("/dev/zero", O_RDONLY)) < 0)
-       {
-         result = NULL;
-       }
-      else if (mbreak + size > mtop)
-       {
-         /* The request would move us past the end of the currently
-            mapped memory, so map in enough more memory to satisfy
-            the request. */
-         moveto = PAGE_ALIGN (mbreak + size);
-         if (mmap (mtop, moveto - mtop, PROT_READ | PROT_WRITE,
-                   MAP_PRIVATE | MAP_FIXED, fd, 0) == mtop)
-           {
-             mtop = moveto;
-             result = (PTR) mbreak;
-             mbreak += size;
-           }
-       }
-      else
-       {
-         result = (PTR) mbreak;
-         mbreak += size;
-       }
-    }
-  return (result);
-}
-
-PTR
-mmap_remap (base, mapsize, fd, foffset)
-     PTR base;
-     long mapsize;
-     int fd;
-     long foffset;
-{
-  /* FIXME:  Quick hack, needs error checking and other attention. */
-  munmap (mbase, (size_t) (mtop - mbase));
-  mbase = base;
-  mtop = mbase + mapsize;
-  base = mmap (base, mapsize, PROT_READ | PROT_WRITE,
-              MAP_PRIVATE | MAP_FIXED, dup (fd), foffset);
-  return (base);
-}
-
-
-#endif /* HAVE_MMAP */
diff --git a/gdb/mtrace.awk b/gdb/mtrace.awk
deleted file mode 100755 (executable)
index d7689ce..0000000
+++ /dev/null
@@ -1,36 +0,0 @@
-#
-#  Awk program to analyze mtrace.c output.
-#
-$1 == "+"      { if (allocated[$2] != "")
-                   print "+", $2, "Alloc", NR, "duplicate:", allocated[$2];
-                 else
-                   allocated[$2] = $3;
-               }
-$1 == "-"      { if (allocated[$2] != "") {
-                   allocated[$2] = "";
-                   if (allocated[$2] != "")
-                       print "DELETE FAILED", $2, allocated[$2];
-                 } else
-                   print "-", $2, "Free", NR, "was never alloc'd";
-               }
-$1 == "<"      { if (allocated[$2] != "")
-                   allocated[$2] = "";
-                 else
-                   print "-", $2, "Realloc", NR, "was never alloc'd";
-               }
-$1 == ">"      { if (allocated[$2] != "")
-                   print "+", $2, "Realloc", NR, "duplicate:", allocated[$2];
-                 else
-                   allocated[$2] = $3;
-               }
-
-# Ignore "= Start"
-$1 == "="      { }
-# Ignore failed realloc attempts for now
-$1 == "!"      { }
-
-
-END            { for (x in allocated) 
-                   if (allocated[x] != "")
-                     print "+", x, allocated[x];
-               }
diff --git a/gdb/mtrace.c b/gdb/mtrace.c
deleted file mode 100755 (executable)
index 82e7f03..0000000
+++ /dev/null
@@ -1,146 +0,0 @@
-/* More debugging hooks for `malloc'.
-   Copyright 1991 Free Software Foundation
-                 Written April 2, 1991 by John Gilmore of Cygnus Support
-                 Based on mcheck.c by Mike Haertel.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-#include <stdio.h>
-#include "ansidecl.h"
-
-/* size_t may be defined in the system-supplied stdio.h.  */
-/* So just kludge it.  */
-#define size_t unsigned int
-#define ptrdiff_t int
-#define __ONEFILE
-
-/* We can't declare malloc and realloc here because we don't know
-   if they are char * or void *, and the compiler will give an error
-   if we get it wrong and they happen to be defined in some header
-   file e.g. <stdio.h>.  We can't include <stdlib.h> here because
-   it has some incompatability with our own includes, e.g. size_t or 
-   whatever.  So we just punt.  This causes malloc and realloc to
-   default to returning "int", which works for most cases we care
-   about.  FIXME-somehow.  */
-/* #include <stdlib.h> */
-#include "gmalloc.h"
-
-extern char *getenv();
-
-FILE *mallstream;
-char mallenv[] = "MALLOC_TRACE";
-static char mallbuf[BUFSIZ];           /* Buffer for the output */
-
-/* Address to breakpoint on accesses to... */
-PTR mallwatch;
-
-/* Old hook values.  */
-static void EXFUN((*old_free_hook), (PTR ptr));
-static PTR EXFUN((*old_malloc_hook), (size_t size));
-static PTR EXFUN((*old_realloc_hook), (PTR ptr, size_t size));
-
-/* This function is called when the block being alloc'd, realloc'd, or
-   freed has an address matching the variable "mallwatch".  In a debugger,
-   set "mallwatch" to the address of interest, then put a breakpoint on
-   tr_break.  */
-
-void
-tr_break()
-{
-  ;
-}
-
-static void
-DEFUN(tr_freehook, (ptr), PTR ptr)
-{
-  fprintf(mallstream, "- %08x\n", ptr);        /* Be sure to print it first */
-  if (ptr == mallwatch)
-    tr_break();
-  __free_hook = old_free_hook;
-  free(ptr);
-  __free_hook = tr_freehook;
-}
-
-static PTR
-DEFUN(tr_mallochook, (size), size_t size)
-{
-  PTR hdr;
-
-  __malloc_hook = old_malloc_hook;
-  hdr = (PTR) malloc(size);
-  __malloc_hook = tr_mallochook;
-
-  /* We could be printing a NULL here; that's OK */
-  fprintf (mallstream, "+ %08x %x\n", hdr, size);
-
-  if (hdr == mallwatch)
-    tr_break();
-
-  return hdr;
-}
-
-static PTR
-DEFUN(tr_reallochook, (ptr, size), PTR ptr AND size_t size)
-{
-  PTR hdr;
-
-  if (ptr == mallwatch)
-    tr_break();
-
-  __free_hook = old_free_hook;
-  __malloc_hook = old_malloc_hook;
-  __realloc_hook = old_realloc_hook;
-  hdr = (PTR) realloc(ptr, size);
-  __free_hook = tr_freehook;
-  __malloc_hook = tr_mallochook;
-  __realloc_hook = tr_reallochook;
-  if (hdr == NULL) {
-    fprintf (mallstream, "! %08x %x\n", ptr, size);    /* Failed realloc */
-  } else {
-    fprintf (mallstream, "< %08x\n> %08x %x\n", ptr, hdr, size);
-  }
-
-  if (hdr == mallwatch)
-    tr_break();
-
-  return hdr;
-}
-
-/* We enable tracing if either the environment variable MALLOC_TRACE
-   is set, or if the variable mallwatch has been patched to an address
-   that the debugging user wants us to stop on.  When patching mallwatch,
-   don't forget to set a breakpoint on tr_break!  */
-
-void
-mtrace()
-{
-  char *mallfile;
-
-  mallfile = getenv (mallenv);
-  if (mallfile || mallwatch) {
-    mallstream = fopen (mallfile? mallfile: "/dev/null", "w");
-    if (mallstream) {
-      /* Be sure it doesn't malloc its buffer! */
-      setbuf (mallstream, mallbuf);
-      fprintf (mallstream, "= Start\n");
-      old_free_hook = __free_hook;
-      __free_hook = tr_freehook;
-      old_malloc_hook = __malloc_hook;
-      __malloc_hook = tr_mallochook;
-      old_realloc_hook = __realloc_hook;
-      __realloc_hook = tr_reallochook;
-    }
-  }
-}
index fb78d2d..e69de29 100644 (file)
@@ -1,297 +0,0 @@
-/* Functions specific to running gdb native on a Sun 4 running sunos4.
-   Copyright (C) 1989, 1992, Free Software Foundation, Inc.
-
-This file is part of GDB.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-#include "defs.h"
-#include "inferior.h"
-#include "target.h"
-#include "nat.h"
-
-#include <signal.h>
-#include <sys/ptrace.h>
-#include <sys/wait.h>
-#include <machine/reg.h>
-
-/* We don't store all registers immediately when requested, since they
-   get sent over in large chunks anyway.  Instead, we accumulate most
-   of the changes and send them over once.  "deferred_stores" keeps
-   track of which sets of registers we have locally-changed copies of,
-   so we only need send the groups that have changed.  */
-
-#define        INT_REGS        1
-#define        STACK_REGS      2
-#define        FP_REGS         4
-
-/* Fetch one or more registers from the inferior.  REGNO == -1 to get
-   them all.  We actually fetch more than requested, when convenient,
-   marking them as valid so we won't fetch them again.  */
-
-void
-fetch_inferior_registers (regno)
-     int regno;
-{
-  struct regs inferior_registers;
-  struct fp_status inferior_fp_registers;
-  int i;
-
-  /* We should never be called with deferred stores, because a prerequisite
-     for writing regs is to have fetched them all (PREPARE_TO_STORE), sigh.  */
-  if (deferred_stores) abort();
-
-  DO_DEFERRED_STORES;
-
-  /* Global and Out regs are fetched directly, as well as the control
-     registers.  If we're getting one of the in or local regs,
-     and the stack pointer has not yet been fetched,
-     we have to do that first, since they're found in memory relative
-     to the stack pointer.  */
-  if (regno < O7_REGNUM  /* including -1 */
-      || regno >= Y_REGNUM
-      || (!register_valid[SP_REGNUM] && regno < I7_REGNUM))
-    {
-      if (0 != ptrace (PTRACE_GETREGS, inferior_pid,
-                      (PTRACE_ARG3_TYPE) &inferior_registers, 0))
-       perror("ptrace_getregs");
-      
-      registers[REGISTER_BYTE (0)] = 0;
-      memcpy (&registers[REGISTER_BYTE (1)], &inferior_registers.r_g1,
-             15 * REGISTER_RAW_SIZE (G0_REGNUM));
-      *(int *)&registers[REGISTER_BYTE (PS_REGNUM)] = inferior_registers.r_ps; 
-      *(int *)&registers[REGISTER_BYTE (PC_REGNUM)] = inferior_registers.r_pc;
-      *(int *)&registers[REGISTER_BYTE (NPC_REGNUM)] = inferior_registers.r_npc;
-      *(int *)&registers[REGISTER_BYTE (Y_REGNUM)] = inferior_registers.r_y;
-
-      for (i = G0_REGNUM; i <= O7_REGNUM; i++)
-       register_valid[i] = 1;
-      register_valid[Y_REGNUM] = 1;
-      register_valid[PS_REGNUM] = 1;
-      register_valid[PC_REGNUM] = 1;
-      register_valid[NPC_REGNUM] = 1;
-      /* If we don't set these valid, read_register_bytes() rereads
-        all the regs every time it is called!  FIXME.  */
-      register_valid[WIM_REGNUM] = 1;  /* Not true yet, FIXME */
-      register_valid[TBR_REGNUM] = 1;  /* Not true yet, FIXME */
-      register_valid[FPS_REGNUM] = 1;  /* Not true yet, FIXME */
-      register_valid[CPS_REGNUM] = 1;  /* Not true yet, FIXME */
-    }
-
-  /* Floating point registers */
-  if (regno == -1 || (regno >= FP0_REGNUM && regno <= FP0_REGNUM + 31))
-    {
-      if (0 != ptrace (PTRACE_GETFPREGS, inferior_pid,
-                      (PTRACE_ARG3_TYPE) &inferior_fp_registers,
-                      0))
-           perror("ptrace_getfpregs");
-      memcpy (&registers[REGISTER_BYTE (FP0_REGNUM)], &inferior_fp_registers,
-             sizeof inferior_fp_registers.fpu_fr);
-      /* bcopy (&inferior_fp_registers.Fpu_fsr,
-            &registers[REGISTER_BYTE (FPS_REGNUM)],
-            sizeof (FPU_FSR_TYPE));  FIXME???  -- gnu@cyg */
-      for (i = FP0_REGNUM; i <= FP0_REGNUM+31; i++)
-       register_valid[i] = 1;
-      register_valid[FPS_REGNUM] = 1;
-    }
-
-  /* These regs are saved on the stack by the kernel.  Only read them
-     all (16 ptrace calls!) if we really need them.  */
-  if (regno == -1)
-    {
-      target_xfer_memory (*(CORE_ADDR*)&registers[REGISTER_BYTE (SP_REGNUM)],
-                         &registers[REGISTER_BYTE (L0_REGNUM)],
-                         16*REGISTER_RAW_SIZE (L0_REGNUM), 0);
-      for (i = L0_REGNUM; i <= I7_REGNUM; i++)
-       register_valid[i] = 1;
-    }
-  else if (regno >= L0_REGNUM && regno <= I7_REGNUM)
-    {
-      CORE_ADDR sp = *(CORE_ADDR*)&registers[REGISTER_BYTE (SP_REGNUM)];
-      i = REGISTER_BYTE (regno);
-      if (register_valid[regno])
-       printf("register %d valid and read\n", regno);
-      target_xfer_memory (sp + i - REGISTER_BYTE (L0_REGNUM),
-                         &registers[i], REGISTER_RAW_SIZE (regno), 0);
-      register_valid[regno] = 1;
-    }
-}
-
-/* Store our register values back into the inferior.
-   If REGNO is -1, do this for all registers.
-   Otherwise, REGNO specifies which register (so we can save time).  */
-
-void
-store_inferior_registers (regno)
-     int regno;
-{
-  struct regs inferior_registers;
-  struct fp_status inferior_fp_registers;
-  int wanna_store = INT_REGS + STACK_REGS + FP_REGS;
-
-  /* First decide which pieces of machine-state we need to modify.  
-     Default for regno == -1 case is all pieces.  */
-  if (regno >= 0)
-    if (FP0_REGNUM <= regno && regno < FP0_REGNUM + 32)
-      {
-       wanna_store = FP_REGS;
-      }
-    else 
-      {
-       if (regno == SP_REGNUM)
-         wanna_store = INT_REGS + STACK_REGS;
-       else if (regno < L0_REGNUM || regno > I7_REGNUM)
-         wanna_store = INT_REGS;
-       else
-         wanna_store = STACK_REGS;
-      }
-
-  /* See if we're forcing the stores to happen now, or deferring. */
-  if (regno == -2)
-    {
-      wanna_store = deferred_stores;
-      deferred_stores = 0;
-    }
-  else
-    {
-      if (wanna_store == STACK_REGS)
-       {
-         /* Fall through and just store one stack reg.  If we deferred
-            it, we'd have to store them all, or remember more info.  */
-       }
-      else
-       {
-         deferred_stores |= wanna_store;
-         return;
-       }
-    }
-
-  if (wanna_store & STACK_REGS)
-    {
-      CORE_ADDR sp = *(CORE_ADDR *)&registers[REGISTER_BYTE (SP_REGNUM)];
-
-      if (regno < 0 || regno == SP_REGNUM)
-       {
-         if (!register_valid[L0_REGNUM+5]) abort();
-         target_xfer_memory (sp, 
-                             &registers[REGISTER_BYTE (L0_REGNUM)],
-                             16*REGISTER_RAW_SIZE (L0_REGNUM), 1);
-       }
-      else
-       {
-         if (!register_valid[regno]) abort();
-         target_xfer_memory (sp + REGISTER_BYTE (regno) - REGISTER_BYTE (L0_REGNUM),
-                             &registers[REGISTER_BYTE (regno)],
-                             REGISTER_RAW_SIZE (regno), 1);
-       }
-       
-    }
-
-  if (wanna_store & INT_REGS)
-    {
-      if (!register_valid[G1_REGNUM]) abort();
-
-      memcpy (&inferior_registers.r_g1, &registers[REGISTER_BYTE (G1_REGNUM)],
-             15 * REGISTER_RAW_SIZE (G1_REGNUM));
-
-      inferior_registers.r_ps =
-       *(int *)&registers[REGISTER_BYTE (PS_REGNUM)];
-      inferior_registers.r_pc =
-       *(int *)&registers[REGISTER_BYTE (PC_REGNUM)];
-      inferior_registers.r_npc =
-       *(int *)&registers[REGISTER_BYTE (NPC_REGNUM)];
-      inferior_registers.r_y =
-       *(int *)&registers[REGISTER_BYTE (Y_REGNUM)];
-
-      if (0 != ptrace (PTRACE_SETREGS, inferior_pid,
-                      (PTRACE_ARG3_TYPE) &inferior_registers, 0))
-       perror("ptrace_setregs");
-    }
-
-  if (wanna_store & FP_REGS)
-    {
-      if (!register_valid[FP0_REGNUM+9]) abort();
-      memcpy (&inferior_fp_registers, &registers[REGISTER_BYTE (FP0_REGNUM)],
-             sizeof inferior_fp_registers.fpu_fr);
-
-/*    memcpy (&inferior_fp_registers.Fpu_fsr, 
-             &registers[REGISTER_BYTE (FPS_REGNUM)], sizeof (FPU_FSR_TYPE));
-****/
-      if (0 !=
-        ptrace (PTRACE_SETFPREGS, inferior_pid,
-                (PTRACE_ARG3_TYPE) &inferior_fp_registers, 0))
-        perror("ptrace_setfpregs");
-    }
-}
-
-
-void
-fetch_core_registers (core_reg_sect, core_reg_size, which, ignore)
-  char *core_reg_sect;
-  unsigned core_reg_size;
-  int which;
-  unsigned int ignore; /* reg addr, unused in this version */
-{
-
-  if (which == 0) {
-
-    /* Integer registers */
-
-#define gregs ((struct regs *)core_reg_sect)
-    /* G0 *always* holds 0.  */
-    *(int *)&registers[REGISTER_BYTE (0)] = 0;
-
-    /* The globals and output registers.  */
-    memcpy (&registers[REGISTER_BYTE (G1_REGNUM)], &gregs->r_g1, 
-           15 * REGISTER_RAW_SIZE (G1_REGNUM));
-    *(int *)&registers[REGISTER_BYTE (PS_REGNUM)] = gregs->r_ps;
-    *(int *)&registers[REGISTER_BYTE (PC_REGNUM)] = gregs->r_pc;
-    *(int *)&registers[REGISTER_BYTE (NPC_REGNUM)] = gregs->r_npc;
-    *(int *)&registers[REGISTER_BYTE (Y_REGNUM)] = gregs->r_y;
-
-    /* My best guess at where to get the locals and input
-       registers is exactly where they usually are, right above
-       the stack pointer.  If the core dump was caused by a bus error
-       from blowing away the stack pointer (as is possible) then this
-       won't work, but it's worth the try. */
-    {
-      int sp;
-
-      sp = *(int *)&registers[REGISTER_BYTE (SP_REGNUM)];
-      if (0 != target_read_memory (sp, &registers[REGISTER_BYTE (L0_REGNUM)], 
-                         16 * REGISTER_RAW_SIZE (L0_REGNUM)))
-       {
-         /* fprintf so user can still use gdb */
-         fprintf (stderr,
-                  "Couldn't read input and local registers from core file\n");
-       }
-    }
-  } else if (which == 2) {
-
-    /* Floating point registers */
-
-#define fpuregs  ((struct fpu *) core_reg_sect)
-    if (core_reg_size >= sizeof (struct fpu))
-      {
-       memcpy (&registers[REGISTER_BYTE (FP0_REGNUM)], fpuregs->fpu_regs,
-               sizeof (fpuregs->fpu_regs));
-       memcpy (&registers[REGISTER_BYTE (FPS_REGNUM)], &fpuregs->fpu_fsr,
-               sizeof (FPU_FSR_TYPE));
-      }
-    else
-      fprintf (stderr, "Couldn't read float regs from core file\n");
-  }
-}
-
index d871289..e69de29 100644 (file)
@@ -1,27 +0,0 @@
-/* Macro definitions for running gdb on a Sun 4 running sunos 4.
-   Copyright (C) 1989, 1992, Free Software Foundation, Inc.
-
-This file is part of GDB.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-/* Do implement the attach and detach commands.  */
-
-#define ATTACH_DETACH
-
-/* Override copies of {fetch,store}_inferior_registers in infptrace.c.  */
-
-#define FETCH_INFERIOR_REGISTERS
-
index 38bed5a..e69de29 100644 (file)
@@ -1,2 +0,0 @@
-/* this file is temporary scaffolding until all hosts have the
-   native/target/host split in place.  FIXME.  */
diff --git a/gdb/np1-opcode.h b/gdb/np1-opcode.h
deleted file mode 100755 (executable)
index 7e1001d..0000000
+++ /dev/null
@@ -1,422 +0,0 @@
-/* Print GOULD NPL instructions for GDB, the GNU debugger.
-   Copyright (C) 1986, 1987, 1989 Free Software Foundation, Inc.
-
-This file is part of GDB.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-struct gld_opcode
-{
-  char *name;
-  unsigned long opcode;
-  unsigned long mask;
-  char *args;
-  int length;
-};
-
-/* We store four bytes of opcode for all opcodes because that
-   is the most any of them need.  The actual length of an instruction
-   is always at least 2 bytes, and at most four.  The length of the
-   instruction is based on the opcode.
-
-   The mask component is a mask saying which bits must match
-   particular opcode in order for an instruction to be an instance
-   of that opcode.
-
-   The args component is a string containing characters
-   that are used to format the arguments to the instruction. */
-
-/* Kinds of operands:
-   r  Register in first field
-   R  Register in second field
-   b  Base register in first field
-   B  Base register in second field
-   v  Vector register in first field
-   V  Vector register in first field
-   A  Optional address register (base register)
-   X  Optional index register
-   I  Immediate data (16bits signed)
-   O  Offset field (16bits signed)
-   h  Offset field (15bits signed)
-   d  Offset field (14bits signed)
-   S  Shift count field
-
-   any other characters are printed as is...
-*/
-
-/* The assembler requires that this array be sorted as follows:
-   all instances of the same mnemonic must be consecutive.
-   All instances of the same mnemonic with the same number of operands
-   must be consecutive.
- */
-struct gld_opcode gld_opcodes[] =
-{
-{ "lb",                0xb4080000,     0xfc080000,     "r,xOA,X",      4 },
-{ "lnb",       0xb8080000,     0xfc080000,     "r,xOA,X",      4 },
-{ "lbs",       0xec080000,     0xfc080000,     "r,xOA,X",      4 },
-{ "lh",                0xb4000001,     0xfc080001,     "r,xOA,X",      4 },
-{ "lnh",       0xb8000001,     0xfc080001,     "r,xOA,X",      4 },
-{ "lw",                0xb4000000,     0xfc080000,     "r,xOA,X",      4 },
-{ "lnw",       0xb8000000,     0xfc080000,     "r,xOA,X",      4 },
-{ "ld",                0xb4000002,     0xfc080002,     "r,xOA,X",      4 },
-{ "lnd",       0xb8000002,     0xfc080002,     "r,xOA,X",      4 },
-{ "li",                0xf8000000,     0xfc7f0000,     "r,I",          4 },
-{ "lpa",       0x50080000,     0xfc080000,     "r,xOA,X",      4 },
-{ "la",                0x50000000,     0xfc080000,     "r,xOA,X",      4 },
-{ "labr",      0x58080000,     0xfc080000,     "b,xOA,X",      4 },
-{ "lbp",       0x90080000,     0xfc080000,     "r,xOA,X",      4 },
-{ "lhp",       0x90000001,     0xfc080001,     "r,xOA,X",      4 },
-{ "lwp",       0x90000000,     0xfc080000,     "r,xOA,X",      4 },
-{ "ldp",       0x90000002,     0xfc080002,     "r,xOA,X",      4 },
-{ "suabr",     0x58000000,     0xfc080000,     "b,xOA,X",      4 },
-{ "lf",                0xbc000000,     0xfc080000,     "r,xOA,X",      4 },
-{ "lfbr",      0xbc080000,     0xfc080000,     "b,xOA,X",      4 },
-{ "lwbr",      0x5c000000,     0xfc080000,     "b,xOA,X",      4 },
-{ "stb",       0xd4080000,     0xfc080000,     "r,xOA,X",      4 },
-{ "sth",       0xd4000001,     0xfc080001,     "r,xOA,X",      4 },
-{ "stw",       0xd4000000,     0xfc080000,     "r,xOA,X",      4 },
-{ "std",       0xd4000002,     0xfc080002,     "r,xOA,X",      4 },
-{ "stf",       0xdc000000,     0xfc080000,     "r,xOA,X",      4 },
-{ "stfbr",     0xdc080000,     0xfc080000,     "b,xOA,X",      4 },
-{ "stwbr",     0x54000000,     0xfc080000,     "b,xOA,X",      4 },
-{ "zmb",       0xd8080000,     0xfc080000,     "r,xOA,X",      4 },
-{ "zmh",       0xd8000001,     0xfc080001,     "r,xOA,X",      4 },
-{ "zmw",       0xd8000000,     0xfc080000,     "r,xOA,X",      4 },
-{ "zmd",       0xd8000002,     0xfc080002,     "r,xOA,X",      4 },
-{ "stbp",      0x94080000,     0xfc080000,     "r,xOA,X",      4 },
-{ "sthp",      0x94000001,     0xfc080001,     "r,xOA,X",      4 },
-{ "stwp",      0x94000000,     0xfc080000,     "r,xOA,X",      4 },
-{ "stdp",      0x94000002,     0xfc080002,     "r,xOA,X",      4 },
-{ "lil",       0xf80b0000,     0xfc7f0000,     "r,D",          4 },
-{ "lwsl1",     0xec000000,     0xfc080000,     "r,xOA,X",      4 },
-{ "lwsl2",     0xfc000000,     0xfc080000,     "r,xOA,X",      4 },
-{ "lwsl3",     0xfc080000,     0xfc080000,     "r,xOA,X",      4 },
-
-{ "lvb",       0xb0080000,     0xfc080000,     "v,xOA,X",      4 },
-{ "lvh",       0xb0000001,     0xfc080001,     "v,xOA,X",      4 },
-{ "lvw",       0xb0000000,     0xfc080000,     "v,xOA,X",      4 },
-{ "lvd",       0xb0000002,     0xfc080002,     "v,xOA,X",      4 },
-{ "liv",       0x3c040000,     0xfc0f0000,     "v,R",          2 },
-{ "livf",      0x3c080000,     0xfc0f0000,     "v,R",          2 },
-{ "stvb",      0xd0080000,     0xfc080000,     "v,xOA,X",      4 },
-{ "stvh",      0xd0000001,     0xfc080001,     "v,xOA,X",      4 },
-{ "stvw",      0xd0000000,     0xfc080000,     "v,xOA,X",      4 },
-{ "stvd",      0xd0000002,     0xfc080002,     "v,xOA,X",      4 },
-
-{ "trr",       0x2c000000,     0xfc0f0000,     "r,R",          2 },
-{ "trn",       0x2c040000,     0xfc0f0000,     "r,R",          2 },
-{ "trnd",      0x2c0c0000,     0xfc0f0000,     "r,R",          2 },
-{ "trabs",     0x2c010000,     0xfc0f0000,     "r,R",          2 },
-{ "trabsd",    0x2c090000,     0xfc0f0000,     "r,R",          2 },
-{ "trc",       0x2c030000,     0xfc0f0000,     "r,R",          2 },
-{ "xcr",       0x28040000,     0xfc0f0000,     "r,R",          2 },
-{ "cxcr",      0x2c060000,     0xfc0f0000,     "r,R",          2 },
-{ "cxcrd",     0x2c0e0000,     0xfc0f0000,     "r,R",          2 },
-{ "tbrr",      0x2c020000,     0xfc0f0000,     "r,B",          2 },
-{ "trbr",      0x28030000,     0xfc0f0000,     "b,R",          2 },
-{ "xcbr",      0x28020000,     0xfc0f0000,     "b,B",          2 },
-{ "tbrbr",     0x28010000,     0xfc0f0000,     "b,B",          2 },
-
-{ "trvv",      0x28050000,     0xfc0f0000,     "v,V",          2 },
-{ "trvvn",     0x2c050000,     0xfc0f0000,     "v,V",          2 },
-{ "trvvnd",    0x2c0d0000,     0xfc0f0000,     "v,V",          2 },
-{ "trvab",     0x2c070000,     0xfc0f0000,     "v,V",          2 },
-{ "trvabd",    0x2c0f0000,     0xfc0f0000,     "v,V",          2 },
-{ "cmpv",      0x14060000,     0xfc0f0000,     "v,V",          2 },
-{ "expv",      0x14070000,     0xfc0f0000,     "v,V",          2 },
-{ "mrvvlt",    0x10030000,     0xfc0f0000,     "v,V",          2 },
-{ "mrvvle",    0x10040000,     0xfc0f0000,     "v,V",          2 },
-{ "mrvvgt",    0x14030000,     0xfc0f0000,     "v,V",          2 },
-{ "mrvvge",    0x14040000,     0xfc0f0000,     "v,V",          2 },
-{ "mrvveq",    0x10050000,     0xfc0f0000,     "v,V",          2 },
-{ "mrvvne",    0x10050000,     0xfc0f0000,     "v,V",          2 },
-{ "mrvrlt",    0x100d0000,     0xfc0f0000,     "v,R",          2 },
-{ "mrvrle",    0x100e0000,     0xfc0f0000,     "v,R",          2 },
-{ "mrvrgt",    0x140d0000,     0xfc0f0000,     "v,R",          2 },
-{ "mrvrge",    0x140e0000,     0xfc0f0000,     "v,R",          2 },
-{ "mrvreq",    0x100f0000,     0xfc0f0000,     "v,R",          2 },
-{ "mrvrne",    0x140f0000,     0xfc0f0000,     "v,R",          2 },
-{ "trvr",      0x140b0000,     0xfc0f0000,     "r,V",          2 },
-{ "trrv",      0x140c0000,     0xfc0f0000,     "v,R",          2 },
-
-{ "bu",                0x40000000,     0xff880000,     "xOA,X",        4 },
-{ "bns",       0x70080000,     0xff880000,     "xOA,X",        4 },
-{ "bnco",      0x70880000,     0xff880000,     "xOA,X",        4 },
-{ "bge",       0x71080000,     0xff880000,     "xOA,X",        4 },
-{ "bne",       0x71880000,     0xff880000,     "xOA,X",        4 },
-{ "bunge",     0x72080000,     0xff880000,     "xOA,X",        4 },
-{ "bunle",     0x72880000,     0xff880000,     "xOA,X",        4 },
-{ "bgt",       0x73080000,     0xff880000,     "xOA,X",        4 },
-{ "bnany",     0x73880000,     0xff880000,     "xOA,X",        4 },
-{ "bs" ,       0x70000000,     0xff880000,     "xOA,X",        4 },
-{ "bco",       0x70800000,     0xff880000,     "xOA,X",        4 },
-{ "blt",       0x71000000,     0xff880000,     "xOA,X",        4 },
-{ "beq",       0x71800000,     0xff880000,     "xOA,X",        4 },
-{ "buge",      0x72000000,     0xff880000,     "xOA,X",        4 },
-{ "bult",      0x72800000,     0xff880000,     "xOA,X",        4 },
-{ "ble",       0x73000000,     0xff880000,     "xOA,X",        4 },
-{ "bany",      0x73800000,     0xff880000,     "xOA,X",        4 },
-{ "brlnk",     0x44000000,     0xfc080000,     "r,xOA,X",      4 },
-{ "bib",       0x48000000,     0xfc080000,     "r,xOA,X",      4 },
-{ "bih",       0x48080000,     0xfc080000,     "r,xOA,X",      4 },
-{ "biw",       0x4c000000,     0xfc080000,     "r,xOA,X",      4 },
-{ "bid",       0x4c080000,     0xfc080000,     "r,xOA,X",      4 },
-{ "bivb",      0x60000000,     0xfc080000,     "r,xOA,X",      4 },
-{ "bivh",      0x60080000,     0xfc080000,     "r,xOA,X",      4 },
-{ "bivw",      0x64000000,     0xfc080000,     "r,xOA,X",      4 },
-{ "bivd",      0x64080000,     0xfc080000,     "r,xOA,X",      4 },
-{ "bvsb",      0x68000000,     0xfc080000,     "r,xOA,X",      4 },
-{ "bvsh",      0x68080000,     0xfc080000,     "r,xOA,X",      4 },
-{ "bvsw",      0x6c000000,     0xfc080000,     "r,xOA,X",      4 },
-{ "bvsd",      0x6c080000,     0xfc080000,     "r,xOA,X",      4 },
-
-{ "camb",      0x80080000,     0xfc080000,     "r,xOA,X",      4 },
-{ "camh",      0x80000001,     0xfc080001,     "r,xOA,X",      4 },
-{ "camw",      0x80000000,     0xfc080000,     "r,xOA,X",      4 },
-{ "camd",      0x80000002,     0xfc080002,     "r,xOA,X",      4 },
-{ "car",       0x10000000,     0xfc0f0000,     "r,R",          2 },
-{ "card",      0x14000000,     0xfc0f0000,     "r,R",          2 },
-{ "ci",                0xf8050000,     0xfc7f0000,     "r,I",          4 },
-{ "chkbnd",    0x5c080000,     0xfc080000,     "r,xOA,X",      4 },
-
-{ "cavv",      0x10010000,     0xfc0f0000,     "v,V",          2 },
-{ "cavr",      0x10020000,     0xfc0f0000,     "v,R",          2 },
-{ "cavvd",     0x10090000,     0xfc0f0000,     "v,V",          2 },
-{ "cavrd",     0x100b0000,     0xfc0f0000,     "v,R",          2 },
-
-{ "anmb",      0x84080000,     0xfc080000,     "r,xOA,X",      4 },
-{ "anmh",      0x84000001,     0xfc080001,     "r,xOA,X",      4 },
-{ "anmw",      0x84000000,     0xfc080000,     "r,xOA,X",      4 },
-{ "anmd",      0x84000002,     0xfc080002,     "r,xOA,X",      4 },
-{ "anr",       0x04000000,     0xfc0f0000,     "r,R",          2 },
-{ "ani",       0xf8080000,     0xfc7f0000,     "r,I",          4 },
-{ "ormb",      0xb8080000,     0xfc080000,     "r,xOA,X",      4 },
-{ "ormh",      0xb8000001,     0xfc080001,     "r,xOA,X",      4 },
-{ "ormw",      0xb8000000,     0xfc080000,     "r,xOA,X",      4 },
-{ "ormd",      0xb8000002,     0xfc080002,     "r,xOA,X",      4 },
-{ "orr",       0x08000000,     0xfc0f0000,     "r,R",          2 },
-{ "oi",                0xf8090000,     0xfc7f0000,     "r,I",          4 },
-{ "eomb",      0x8c080000,     0xfc080000,     "r,xOA,X",      4 },
-{ "eomh",      0x8c000001,     0xfc080001,     "r,xOA,X",      4 },
-{ "eomw",      0x8c000000,     0xfc080000,     "r,xOA,X",      4 },
-{ "eomd",      0x8c000002,     0xfc080002,     "r,xOA,X",      4 },
-{ "eor",       0x0c000000,     0xfc0f0000,     "r,R",          2 },
-{ "eoi",       0xf80a0000,     0xfc7f0000,     "r,I",          4 },
-
-{ "anvv",      0x04010000,     0xfc0f0000,     "v,V",          2 },
-{ "anvr",      0x04020000,     0xfc0f0000,     "v,R",          2 },
-{ "orvv",      0x08010000,     0xfc0f0000,     "v,V",          2 },
-{ "orvr",      0x08020000,     0xfc0f0000,     "v,R",          2 },
-{ "eovv",      0x0c010000,     0xfc0f0000,     "v,V",          2 },
-{ "eovr",      0x0c020000,     0xfc0f0000,     "v,R",          2 },
-
-{ "sacz",      0x100c0000,     0xfc0f0000,     "r,R",          2 },
-{ "sla",       0x1c400000,     0xfc600000,     "r,S",          2 },
-{ "sll",       0x1c600000,     0xfc600000,     "r,S",          2 },
-{ "slc",       0x24400000,     0xfc600000,     "r,S",          2 },
-{ "slad",      0x20400000,     0xfc600000,     "r,S",          2 },
-{ "slld",      0x20600000,     0xfc600000,     "r,S",          2 },
-{ "sra",       0x1c000000,     0xfc600000,     "r,S",          2 },
-{ "srl",       0x1c200000,     0xfc600000,     "r,S",          2 },
-{ "src",       0x24000000,     0xfc600000,     "r,S",          2 },
-{ "srad",      0x20000000,     0xfc600000,     "r,S",          2 },
-{ "srld",      0x20200000,     0xfc600000,     "r,S",          2 },
-{ "sda",       0x3c030000,     0xfc0f0000,     "r,R",          2 },
-{ "sdl",       0x3c020000,     0xfc0f0000,     "r,R",          2 },
-{ "sdc",       0x3c010000,     0xfc0f0000,     "r,R",          2 },
-{ "sdad",      0x3c0b0000,     0xfc0f0000,     "r,R",          2 },
-{ "sdld",      0x3c0a0000,     0xfc0f0000,     "r,R",          2 },
-
-{ "svda",      0x3c070000,     0xfc0f0000,     "v,R",          2 },
-{ "svdl",      0x3c060000,     0xfc0f0000,     "v,R",          2 },
-{ "svdc",      0x3c050000,     0xfc0f0000,     "v,R",          2 },
-{ "svdad",     0x3c0e0000,     0xfc0f0000,     "v,R",          2 },
-{ "svdld",     0x3c0d0000,     0xfc0f0000,     "v,R",          2 },
-
-{ "sbm",       0xac080000,     0xfc080000,     "f,xOA,X",      4 },
-{ "zbm",       0xac000000,     0xfc080000,     "f,xOA,X",      4 },
-{ "tbm",       0xa8080000,     0xfc080000,     "f,xOA,X",      4 },
-{ "incmb",     0xa0000000,     0xfc080000,     "xOA,X",        4 },
-{ "incmh",     0xa0080000,     0xfc080000,     "xOA,X",        4 },
-{ "incmw",     0xa4000000,     0xfc080000,     "xOA,X",        4 },
-{ "incmd",     0xa4080000,     0xfc080000,     "xOA,X",        4 },
-{ "sbmd",      0x7c080000,     0xfc080000,     "r,xOA,X",      4 },
-{ "zbmd",      0x7c000000,     0xfc080000,     "r,xOA,X",      4 },
-{ "tbmd",      0x78080000,     0xfc080000,     "r,xOA,X",      4 },
-
-{ "ssm",       0x9c080000,     0xfc080000,     "f,xOA,X",      4 },
-{ "zsm",       0x9c000000,     0xfc080000,     "f,xOA,X",      4 },
-{ "tsm",       0x98080000,     0xfc080000,     "f,xOA,X",      4 },
-
-{ "admb",      0xc8080000,     0xfc080000,     "r,xOA,X",      4 },
-{ "admh",      0xc8000001,     0xfc080001,     "r,xOA,X",      4 },
-{ "admw",      0xc8000000,     0xfc080000,     "r,xOA,X",      4 },
-{ "admd",      0xc8000002,     0xfc080002,     "r,xOA,X",      4 },
-{ "adr",       0x38000000,     0xfc0f0000,     "r,R",          2 },
-{ "armb",      0xe8080000,     0xfc080000,     "r,xOA,X",      4 },
-{ "armh",      0xe8000001,     0xfc080001,     "r,xOA,X",      4 },
-{ "armw",      0xe8000000,     0xfc080000,     "r,xOA,X",      4 },
-{ "armd",      0xe8000002,     0xfc080002,     "r,xOA,X",      4 },
-{ "adi",       0xf8010000,     0xfc0f0000,     "r,I",          4 },
-{ "sumb",      0xcc080000,     0xfc080000,     "r,xOA,X",      4 },
-{ "sumh",      0xcc000001,     0xfc080001,     "r,xOA,X",      4 },
-{ "sumw",      0xcc000000,     0xfc080000,     "r,xOA,X",      4 },
-{ "sumd",      0xcc000002,     0xfc080002,     "r,xOA,X",      4 },
-{ "sur",       0x3c000000,     0xfc0f0000,     "r,R",          2 },
-{ "sui",       0xf8020000,     0xfc0f0000,     "r,I",          4 },
-{ "mpmb",      0xc0080000,     0xfc080000,     "r,xOA,X",      4 },
-{ "mpmh",      0xc0000001,     0xfc080001,     "r,xOA,X",      4 },
-{ "mpmw",      0xc0000000,     0xfc080000,     "r,xOA,X",      4 },
-{ "mpr",       0x38020000,     0xfc0f0000,     "r,R",          2 },
-{ "mprd",      0x3c0f0000,     0xfc0f0000,     "r,R",          2 },
-{ "mpi",       0xf8030000,     0xfc0f0000,     "r,I",          4 },
-{ "dvmb",      0xc4080000,     0xfc080000,     "r,xOA,X",      4 },
-{ "dvmh",      0xc4000001,     0xfc080001,     "r,xOA,X",      4 },
-{ "dvmw",      0xc4000000,     0xfc080000,     "r,xOA,X",      4 },
-{ "dvr",       0x380a0000,     0xfc0f0000,     "r,R",          2 },
-{ "dvi",       0xf8040000,     0xfc0f0000,     "r,I",          4 },
-{ "exs",       0x38080000,     0xfc0f0000,     "r,R",          2 },
-
-{ "advv",      0x30000000,     0xfc0f0000,     "v,V",          2 },
-{ "advvd",     0x30080000,     0xfc0f0000,     "v,V",          2 },
-{ "adrv",      0x34000000,     0xfc0f0000,     "v,R",          2 },
-{ "adrvd",     0x34080000,     0xfc0f0000,     "v,R",          2 },
-{ "suvv",      0x30010000,     0xfc0f0000,     "v,V",          2 },
-{ "suvvd",     0x30090000,     0xfc0f0000,     "v,V",          2 },
-{ "surv",      0x34010000,     0xfc0f0000,     "v,R",          2 },
-{ "survd",     0x34090000,     0xfc0f0000,     "v,R",          2 },
-{ "mpvv",      0x30020000,     0xfc0f0000,     "v,V",          2 },
-{ "mprv",      0x34020000,     0xfc0f0000,     "v,R",          2 },
-
-{ "adfw",      0xe0080000,     0xfc080000,     "r,xOA,X",      4 },
-{ "adfd",      0xe0080002,     0xfc080002,     "r,xOA,X",      4 },
-{ "adrfw",     0x38010000,     0xfc0f0000,     "r,R",          2 },
-{ "adrfd",     0x38090000,     0xfc0f0000,     "r,R",          2 },
-{ "surfw",     0xe0000000,     0xfc080000,     "r,xOA,X",      4 },
-{ "surfd",     0xe0000002,     0xfc080002,     "r,xOA,X",      4 },
-{ "surfw",     0x38030000,     0xfc0f0000,     "r,R",          2 },
-{ "surfd",     0x380b0000,     0xfc0f0000,     "r,R",          2 },
-{ "mpfw",      0xe4080000,     0xfc080000,     "r,xOA,X",      4 },
-{ "mpfd",      0xe4080002,     0xfc080002,     "r,xOA,X",      4 },
-{ "mprfw",     0x38060000,     0xfc0f0000,     "r,R",          2 },
-{ "mprfd",     0x380e0000,     0xfc0f0000,     "r,R",          2 },
-{ "rfw",       0xe4000000,     0xfc080000,     "r,xOA,X",      4 },
-{ "rfd",       0xe4000002,     0xfc080002,     "r,xOA,X",      4 },
-{ "rrfw",      0x0c0e0000,     0xfc0f0000,     "r",            2 },
-{ "rrfd",      0x0c0f0000,     0xfc0f0000,     "r",            2 },
-
-{ "advvfw",    0x30040000,     0xfc0f0000,     "v,V",          2 },
-{ "advvfd",    0x300c0000,     0xfc0f0000,     "v,V",          2 },
-{ "adrvfw",    0x34040000,     0xfc0f0000,     "v,R",          2 },
-{ "adrvfd",    0x340c0000,     0xfc0f0000,     "v,R",          2 },
-{ "suvvfw",    0x30050000,     0xfc0f0000,     "v,V",          2 },
-{ "suvvfd",    0x300d0000,     0xfc0f0000,     "v,V",          2 },
-{ "survfw",    0x34050000,     0xfc0f0000,     "v,R",          2 },
-{ "survfd",    0x340d0000,     0xfc0f0000,     "v,R",          2 },
-{ "mpvvfw",    0x30060000,     0xfc0f0000,     "v,V",          2 },
-{ "mpvvfd",    0x300e0000,     0xfc0f0000,     "v,V",          2 },
-{ "mprvfw",    0x34060000,     0xfc0f0000,     "v,R",          2 },
-{ "mprvfd",    0x340e0000,     0xfc0f0000,     "v,R",          2 },
-{ "rvfw",      0x30070000,     0xfc0f0000,     "v",            2 },
-{ "rvfd",      0x300f0000,     0xfc0f0000,     "v",            2 },
-
-{ "fltw",      0x38070000,     0xfc0f0000,     "r,R",          2 },
-{ "fltd",      0x380f0000,     0xfc0f0000,     "r,R",          2 },
-{ "fixw",      0x38050000,     0xfc0f0000,     "r,R",          2 },
-{ "fixd",      0x380d0000,     0xfc0f0000,     "r,R",          2 },
-{ "cfpds",     0x3c090000,     0xfc0f0000,     "r,R",          2 },
-
-{ "fltvw",     0x080d0000,     0xfc0f0000,     "v,V",          2 },
-{ "fltvd",     0x080f0000,     0xfc0f0000,     "v,V",          2 },
-{ "fixvw",     0x080c0000,     0xfc0f0000,     "v,V",          2 },
-{ "fixvd",     0x080e0000,     0xfc0f0000,     "v,V",          2 },
-{ "cfpvds",    0x0c0d0000,     0xfc0f0000,     "v,V",          2 },
-
-{ "orvrn",     0x000a0000,     0xfc0f0000,     "r,V",          2 },
-{ "andvrn",    0x00080000,     0xfc0f0000,     "r,V",          2 },
-{ "frsteq",    0x04090000,     0xfc0f0000,     "r,V",          2 },
-{ "sigma",     0x0c080000,     0xfc0f0000,     "r,V",          2 },
-{ "sigmad",    0x0c0a0000,     0xfc0f0000,     "r,V",          2 },
-{ "sigmf",     0x08080000,     0xfc0f0000,     "r,V",          2 },
-{ "sigmfd",    0x080a0000,     0xfc0f0000,     "r,V",          2 },
-{ "prodf",     0x04080000,     0xfc0f0000,     "r,V",          2 },
-{ "prodfd",    0x040a0000,     0xfc0f0000,     "r,V",          2 },
-{ "maxv",      0x10080000,     0xfc0f0000,     "r,V",          2 },
-{ "maxvd",     0x100a0000,     0xfc0f0000,     "r,V",          2 },
-{ "minv",      0x14080000,     0xfc0f0000,     "r,V",          2 },
-{ "minvd",     0x140a0000,     0xfc0f0000,     "r,V",          2 },
-
-{ "lpsd",      0xf0000000,     0xfc080000,     "xOA,X",        4 },
-{ "ldc",       0xf0080000,     0xfc080000,     "xOA,X",        4 },
-{ "spm",       0x040c0000,     0xfc0f0000,     "r",            2 },
-{ "rpm",       0x040d0000,     0xfc0f0000,     "r",            2 },
-{ "tritr",     0x00070000,     0xfc0f0000,     "r",            2 },
-{ "trrit",     0x00060000,     0xfc0f0000,     "r",            2 },
-{ "rpswt",     0x04080000,     0xfc0f0000,     "r",            2 },
-{ "exr",       0xf8070000,     0xfc0f0000,     "",             4 },
-{ "halt",      0x00000000,     0xfc0f0000,     "",             2 },
-{ "wait",      0x00010000,     0xfc0f0000,     "",             2 },
-{ "nop",       0x00020000,     0xfc0f0000,     "",             2 },
-{ "eiae",      0x00030000,     0xfc0f0000,     "",             2 },
-{ "efae",      0x000d0000,     0xfc0f0000,     "",             2 },
-{ "diae",      0x000e0000,     0xfc0f0000,     "",             2 },
-{ "dfae",      0x000f0000,     0xfc0f0000,     "",             2 },
-{ "spvc",      0xf8060000,     0xfc0f0000,     "r,T,N",        4 },
-{ "rdsts",     0x00090000,     0xfc0f0000,     "r",            2 },
-{ "setcpu",    0x000c0000,     0xfc0f0000,     "r",            2 },
-{ "cmc",       0x000b0000,     0xfc0f0000,     "r",            2 },
-{ "trrcu",     0x00040000,     0xfc0f0000,     "r",            2 },
-{ "attnio",    0x00050000,     0xfc0f0000,     "",             2 },
-{ "fudit",     0x28080000,     0xfc0f0000,     "",             2 },
-{ "break",     0x28090000,     0xfc0f0000,     "",             2 },
-{ "frzss",     0x280a0000,     0xfc0f0000,     "",             2 },
-{ "ripi",      0x04040000,     0xfc0f0000,     "r,R",          2 },
-{ "xcp",       0x04050000,     0xfc0f0000,     "r",            2 },
-{ "block",     0x04060000,     0xfc0f0000,     "",             2 },
-{ "unblock",   0x04070000,     0xfc0f0000,     "",             2 },
-{ "trsc",      0x08060000,     0xfc0f0000,     "r,R",          2 },
-{ "tscr",      0x08070000,     0xfc0f0000,     "r,R",          2 },
-{ "fq",                0x04080000,     0xfc0f0000,     "r",            2 },
-{ "flupte",    0x2c080000,     0xfc0f0000,     "r",            2 },
-{ "rviu",      0x040f0000,     0xfc0f0000,     "",             2 },
-{ "ldel",      0x280c0000,     0xfc0f0000,     "r,R",          2 },
-{ "ldu",       0x280d0000,     0xfc0f0000,     "r,R",          2 },
-{ "stdecc",    0x280b0000,     0xfc0f0000,     "r,R",          2 },
-{ "trpc",      0x08040000,     0xfc0f0000,     "r",            2 },
-{ "tpcr",      0x08050000,     0xfc0f0000,     "r",            2 },
-{ "ghalt",     0x0c050000,     0xfc0f0000,     "r",            2 },
-{ "grun",      0x0c040000,     0xfc0f0000,     "",             2 },
-{ "tmpr",      0x2c0a0000,     0xfc0f0000,     "r,R",          2 },
-{ "trmp",      0x2c0b0000,     0xfc0f0000,     "r,R",          2 },
-
-{ "trrve",     0x28060000,     0xfc0f0000,     "r",            2 },
-{ "trver",     0x28070000,     0xfc0f0000,     "r",            2 },
-{ "trvlr",     0x280f0000,     0xfc0f0000,     "r",            2 },
-
-{ "linkfl",    0x18000000,     0xfc0f0000,     "r,R",          2 },
-{ "linkbl",    0x18020000,     0xfc0f0000,     "r,R",          2 },
-{ "linkfp",    0x18010000,     0xfc0f0000,     "r,R",          2 },
-{ "linkbp",    0x18030000,     0xfc0f0000,     "r,R",          2 },
-{ "linkpl",    0x18040000,     0xfc0f0000,     "r,R",          2 },
-{ "ulinkl",    0x18080000,     0xfc0f0000,     "r,R",          2 },
-{ "ulinkp",    0x18090000,     0xfc0f0000,     "r,R",          2 },
-{ "ulinktl",   0x180a0000,     0xfc0f0000,     "r,R",          2 },
-{ "ulinktp",   0x180b0000,     0xfc0f0000,     "r,R",          2 },
-};
-
-int numopcodes = sizeof(gld_opcodes) / sizeof(gld_opcodes[0]);
-
-struct gld_opcode *endop = gld_opcodes + sizeof(gld_opcodes) /
-                               sizeof(gld_opcodes[0]);
diff --git a/gdb/obstack.c b/gdb/obstack.c
deleted file mode 100755 (executable)
index 590fcaa..0000000
+++ /dev/null
@@ -1,333 +0,0 @@
-/* obstack.c - subroutines used implicitly by object stack macros
-   Copyright (C) 1988 Free Software Foundation, Inc.
-
-This program is free software; you can redistribute it and/or modify it
-under the terms of the GNU General Public License as published by the
-Free Software Foundation; either version 1, or (at your option) any
-later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-#include "obstack.h"
-
-#ifdef __STDC__
-#define POINTER void *
-#else
-#define POINTER char *
-#endif
-
-/* Determine default alignment.  */
-struct fooalign {char x; double d;};
-#define DEFAULT_ALIGNMENT ((char *)&((struct fooalign *) 0)->d - (char *)0)
-/* If malloc were really smart, it would round addresses to DEFAULT_ALIGNMENT.
-   But in fact it might be less smart and round addresses to as much as
-   DEFAULT_ROUNDING.  So we prepare for it to do that.  */
-union fooround {long x; double d;};
-#define DEFAULT_ROUNDING (sizeof (union fooround))
-
-/* When we copy a long block of data, this is the unit to do it with.
-   On some machines, copying successive ints does not work;
-   in such a case, redefine COPYING_UNIT to `long' (if that works)
-   or `char' as a last resort.  */
-#ifndef COPYING_UNIT
-#define COPYING_UNIT int
-#endif
-
-/* The non-GNU-C macros copy the obstack into this global variable
-   to avoid multiple evaluation.  */
-
-struct obstack *_obstack;
-\f
-/* Initialize an obstack H for use.  Specify chunk size SIZE (0 means default).
-   Objects start on multiples of ALIGNMENT (0 means use default).
-   CHUNKFUN is the function to use to allocate chunks,
-   and FREEFUN the function to free them.  */
-
-void
-_obstack_begin (h, size, alignment, chunkfun, freefun)
-     struct obstack *h;
-     int size;
-     int alignment;
-     POINTER (*chunkfun) ();
-     void (*freefun) ();
-{
-  register struct _obstack_chunk* chunk; /* points to new chunk */
-
-  if (alignment == 0)
-    alignment = DEFAULT_ALIGNMENT;
-  if (size == 0)
-    /* Default size is what GNU malloc can fit in a 4096-byte block.  */
-    {
-      /* 12 is sizeof (mhead) and 4 is EXTRA from GNU malloc.
-        Use the values for range checking, because if range checking is off,
-        the extra bytes won't be missed terribly, but if range checking is on
-        and we used a larger request, a whole extra 4096 bytes would be
-        allocated.
-
-        These number are irrelevant to the new GNU malloc.  I suspect it is
-        less sensitive to the size of the request.  */
-      int extra = ((((12 + DEFAULT_ROUNDING - 1) & ~(DEFAULT_ROUNDING - 1))
-                   + 4 + DEFAULT_ROUNDING - 1)
-                  & ~(DEFAULT_ROUNDING - 1));
-      size = 4096 - extra;
-    }
-
-  h->chunkfun = chunkfun;
-  h->freefun = freefun;
-  h->chunk_size = size;
-  h->alignment_mask = alignment - 1;
-
-  chunk        = h->chunk = (struct _obstack_chunk *)(*h->chunkfun) (h->chunk_size);
-  h->next_free = h->object_base = chunk->contents;
-  h->chunk_limit = chunk->limit
-   = (char *) chunk + h->chunk_size;
-  chunk->prev = 0;
-}
-
-/* Allocate a new current chunk for the obstack *H
-   on the assumption that LENGTH bytes need to be added
-   to the current object, or a new object of length LENGTH allocated.
-   Copies any partial object from the end of the old chunk
-   to the beginning of the new one.  
-
-   The function must be "int" so it can be used in non-ANSI C
-   compilers in a : expression.  */
-
-int
-_obstack_newchunk (h, length)
-     struct obstack *h;
-     int length;
-{
-  register struct _obstack_chunk*      old_chunk = h->chunk;
-  register struct _obstack_chunk*      new_chunk;
-  register long        new_size;
-  register int obj_size = h->next_free - h->object_base;
-  register int i;
-  int already;
-
-  /* Compute size for new chunk.  */
-  new_size = (obj_size + length) + (obj_size >> 3) + 100;
-  if (new_size < h->chunk_size)
-    new_size = h->chunk_size;
-
-  /* Allocate and initialize the new chunk.  */
-  new_chunk = h->chunk = (struct _obstack_chunk *)(*h->chunkfun) (new_size);
-  new_chunk->prev = old_chunk;
-  new_chunk->limit = h->chunk_limit = (char *) new_chunk + new_size;
-
-  /* Move the existing object to the new chunk.
-     Word at a time is fast and is safe if the object
-     is sufficiently aligned.  */
-  if (h->alignment_mask + 1 >= DEFAULT_ALIGNMENT)
-    {
-      for (i = obj_size / sizeof (COPYING_UNIT) - 1;
-          i >= 0; i--)
-       ((COPYING_UNIT *)new_chunk->contents)[i]
-         = ((COPYING_UNIT *)h->object_base)[i];
-      /* We used to copy the odd few remaining bytes as one extra COPYING_UNIT,
-        but that can cross a page boundary on a machine
-        which does not do strict alignment for COPYING_UNITS.  */
-      already = obj_size / sizeof (COPYING_UNIT) * sizeof (COPYING_UNIT);
-    }
-  else
-    already = 0;
-  /* Copy remaining bytes one by one.  */
-  for (i = already; i < obj_size; i++)
-    new_chunk->contents[i] = h->object_base[i];
-
-  h->object_base = new_chunk->contents;
-  h->next_free = h->object_base + obj_size;
-}
-
-/* Return nonzero if object OBJ has been allocated from obstack H.
-   This is here for debugging.
-   If you use it in a program, you are probably losing.  */
-
-int
-_obstack_allocated_p (h, obj)
-     struct obstack *h;
-     POINTER obj;
-{
-  register struct _obstack_chunk*  lp; /* below addr of any objects in this chunk */
-  register struct _obstack_chunk*  plp;        /* point to previous chunk if any */
-
-  lp = (h)->chunk;
-  while (lp != 0 && ((POINTER)lp > obj || (POINTER)(lp)->limit < obj))
-    {
-      plp = lp -> prev;
-      lp = plp;
-    }
-  return lp != 0;
-}
-
-/* Free objects in obstack H, including OBJ and everything allocate
-   more recently than OBJ.  If OBJ is zero, free everything in H.  */
-
-#ifdef __STDC__
-#undef obstack_free
-void
-obstack_free (struct obstack *h, POINTER obj)
-#else
-int
-_obstack_free (h, obj)
-     struct obstack *h;
-     POINTER obj;
-#endif
-{
-  register struct _obstack_chunk*  lp; /* below addr of any objects in this chunk */
-  register struct _obstack_chunk*  plp;        /* point to previous chunk if any */
-
-  lp = (h)->chunk;
-  /* We use >= because there cannot be an object at the beginning of a chunk.
-     But there can be an empty object at that address
-     at the end of another chunk.  */
-  while (lp != 0 && ((POINTER)lp >= obj || (POINTER)(lp)->limit < obj))
-    {
-      plp = lp -> prev;
-      (*h->freefun) ((POINTER) lp);
-      lp = plp;
-    }
-  if (lp)
-    {
-      (h)->object_base = (h)->next_free = (char *)(obj);
-      (h)->chunk_limit = lp->limit;
-      (h)->chunk = lp;
-    }
-  else if (obj != 0)
-    /* obj is not in any of the chunks! */
-    abort ();
-}
-
-/* Let same .o link with output of gcc and other compilers.  */
-
-#ifdef __STDC__
-int
-_obstack_free (h, obj)
-     struct obstack *h;
-     POINTER obj;
-{
-  obstack_free (h, obj);
-}
-#endif
-\f
-/* #if 0 */
-/* These are now turned off because the applications do not use it
-   and it uses bcopy via obstack_grow, which causes trouble on sysV.  */
-
-/* Now define the functional versions of the obstack macros.
-   Define them to simply use the corresponding macros to do the job.  */
-
-#ifdef __STDC__
-/* These function definitions do not work with non-ANSI preprocessors;
-   they won't pass through the macro names in parentheses.  */
-
-/* The function names appear in parentheses in order to prevent
-   the macro-definitions of the names from being expanded there.  */
-
-POINTER (obstack_base) (obstack)
-     struct obstack *obstack;
-{
-  return obstack_base (obstack);
-}
-
-POINTER (obstack_next_free) (obstack)
-     struct obstack *obstack;
-{
-  return obstack_next_free (obstack);
-}
-
-int (obstack_object_size) (obstack)
-     struct obstack *obstack;
-{
-  return obstack_object_size (obstack);
-}
-
-int (obstack_room) (obstack)
-     struct obstack *obstack;
-{
-  return obstack_room (obstack);
-}
-
-void (obstack_grow) (obstack, pointer, length)
-     struct obstack *obstack;
-     POINTER pointer;
-     int length;
-{
-  obstack_grow (obstack, pointer, length);
-}
-
-void (obstack_grow0) (obstack, pointer, length)
-     struct obstack *obstack;
-     POINTER pointer;
-     int length;
-{
-  obstack_grow0 (obstack, pointer, length);
-}
-
-void (obstack_1grow) (obstack, character)
-     struct obstack *obstack;
-     int character;
-{
-  obstack_1grow (obstack, character);
-}
-
-void (obstack_blank) (obstack, length)
-     struct obstack *obstack;
-     int length;
-{
-  obstack_blank (obstack, length);
-}
-
-void (obstack_1grow_fast) (obstack, character)
-     struct obstack *obstack;
-     int character;
-{
-  obstack_1grow_fast (obstack, character);
-}
-
-void (obstack_blank_fast) (obstack, length)
-     struct obstack *obstack;
-     int length;
-{
-  obstack_blank_fast (obstack, length);
-}
-
-POINTER (obstack_finish) (obstack)
-     struct obstack *obstack;
-{
-  return obstack_finish (obstack);
-}
-
-POINTER (obstack_alloc) (obstack, length)
-     struct obstack *obstack;
-     int length;
-{
-  return obstack_alloc (obstack, length);
-}
-
-POINTER (obstack_copy) (obstack, pointer, length)
-     struct obstack *obstack;
-     POINTER pointer;
-     int length;
-{
-  return obstack_copy (obstack, pointer, length);
-}
-
-POINTER (obstack_copy0) (obstack, pointer, length)
-     struct obstack *obstack;
-     POINTER pointer;
-     int length;
-{
-  return obstack_copy0 (obstack, pointer, length);
-}
-
-#endif /* __STDC__ */
-
-/* #endif 0 */
diff --git a/gdb/obstack.h b/gdb/obstack.h
deleted file mode 100755 (executable)
index 2e80c9c..0000000
+++ /dev/null
@@ -1,416 +0,0 @@
-/* obstack.h - object stack macros
-   Copyright (C) 1988 Free Software Foundation, Inc.
-
-This program is free software; you can redistribute it and/or modify it
-under the terms of the GNU General Public License as published by the
-Free Software Foundation; either version 1, or (at your option) any
-later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-/* Summary:
-
-All the apparent functions defined here are macros. The idea
-is that you would use these pre-tested macros to solve a
-very specific set of problems, and they would run fast.
-Caution: no side-effects in arguments please!! They may be
-evaluated MANY times!!
-
-These macros operate a stack of objects.  Each object starts life
-small, and may grow to maturity.  (Consider building a word syllable
-by syllable.)  An object can move while it is growing.  Once it has
-been "finished" it never changes address again.  So the "top of the
-stack" is typically an immature growing object, while the rest of the
-stack is of mature, fixed size and fixed address objects.
-
-These routines grab large chunks of memory, using a function you
-supply, called `obstack_chunk_alloc'.  On occasion, they free chunks,
-by calling `obstack_chunk_free'.  You must define them and declare
-them before using any obstack macros.
-
-Each independent stack is represented by a `struct obstack'.
-Each of the obstack macros expects a pointer to such a structure
-as the first argument.
-
-One motivation for this package is the problem of growing char strings
-in symbol tables.  Unless you are "fascist pig with a read-only mind"
-[Gosper's immortal quote from HAKMEM item 154, out of context] you
-would not like to put any arbitrary upper limit on the length of your
-symbols.
-
-In practice this often means you will build many short symbols and a
-few long symbols.  At the time you are reading a symbol you don't know
-how long it is.  One traditional method is to read a symbol into a
-buffer, realloc()ating the buffer every time you try to read a symbol
-that is longer than the buffer.  This is beaut, but you still will
-want to copy the symbol from the buffer to a more permanent
-symbol-table entry say about half the time.
-
-With obstacks, you can work differently.  Use one obstack for all symbol
-names.  As you read a symbol, grow the name in the obstack gradually.
-When the name is complete, finalize it.  Then, if the symbol exists already,
-free the newly read name.
-
-The way we do this is to take a large chunk, allocating memory from
-low addresses.  When you want to build a symbol in the chunk you just
-add chars above the current "high water mark" in the chunk.  When you
-have finished adding chars, because you got to the end of the symbol,
-you know how long the chars are, and you can create a new object.
-Mostly the chars will not burst over the highest address of the chunk,
-because you would typically expect a chunk to be (say) 100 times as
-long as an average object.
-
-In case that isn't clear, when we have enough chars to make up
-the object, THEY ARE ALREADY CONTIGUOUS IN THE CHUNK (guaranteed)
-so we just point to it where it lies.  No moving of chars is
-needed and this is the second win: potentially long strings need
-never be explicitly shuffled. Once an object is formed, it does not
-change its address during its lifetime.
-
-When the chars burst over a chunk boundary, we allocate a larger
-chunk, and then copy the partly formed object from the end of the old
-chunk to the beginning of the new larger chunk.  We then carry on
-accreting characters to the end of the object as we normally would.
-
-A special macro is provided to add a single char at a time to a
-growing object.  This allows the use of register variables, which
-break the ordinary 'growth' macro.
-
-Summary:
-       We allocate large chunks.
-       We carve out one object at a time from the current chunk.
-       Once carved, an object never moves.
-       We are free to append data of any size to the currently
-         growing object.
-       Exactly one object is growing in an obstack at any one time.
-       You can run one obstack per control block.
-       You may have as many control blocks as you dare.
-       Because of the way we do it, you can `unwind' a obstack
-         back to a previous state. (You may remove objects much
-         as you would with a stack.)
-*/
-
-
-/* Don't do the contents of this file more than once.  */
-
-#ifndef __OBSTACKS__
-#define __OBSTACKS__
-\f
-/* We use subtraction of (char *)0 instead of casting to int
-   because on word-addressable machines a simple cast to int
-   may ignore the byte-within-word field of the pointer.  */
-
-#ifndef __PTR_TO_INT
-#define __PTR_TO_INT(P) ((P) - (char *)0)
-#endif
-
-#ifndef __INT_TO_PTR
-#define __INT_TO_PTR(P) ((P) + (char *)0)
-#endif
-
-struct _obstack_chunk          /* Lives at front of each chunk. */
-{
-  char  *limit;                        /* 1 past end of this chunk */
-  struct _obstack_chunk *prev; /* address of prior chunk or NULL */
-  char contents[4];            /* objects begin here */
-};
-
-struct obstack         /* control current object in current chunk */
-{
-  long chunk_size;             /* preferred size to allocate chunks in */
-  struct _obstack_chunk* chunk;        /* address of current struct obstack_chunk */
-  char *object_base;           /* address of object we are building */
-  char *next_free;             /* where to add next char to current object */
-  char *chunk_limit;           /* address of char after current chunk */
-  int  temp;                   /* Temporary for some macros.  */
-  int   alignment_mask;                /* Mask of alignment for each object. */
-#ifdef __STDC__
-  void  *(*chunkfun) ();       /* User's fcn to allocate a chunk.  */
-#else
-  char  *(*chunkfun) ();       /* User's fcn to allocate a chunk.  */
-#endif
-  void (*freefun) ();          /* User's function to free a chunk.  */
-};
-\f
-#ifdef __STDC__
-
-/* Do the function-declarations after the structs
-   but before defining the macros.  */
-
-void obstack_init (struct obstack *obstack);
-
-void * obstack_alloc (struct obstack *obstack, int size);
-
-void * obstack_copy (struct obstack *obstack, void *address, int size);
-void * obstack_copy0 (struct obstack *obstack, void *address, int size);
-
-void obstack_free (struct obstack *obstack, void *block);
-
-void obstack_blank (struct obstack *obstack, int size);
-
-void obstack_grow (struct obstack *obstack, void *data, int size);
-void obstack_grow0 (struct obstack *obstack, void *data, int size);
-
-void obstack_1grow (struct obstack *obstack, int data_char);
-void obstack_ptr_grow (struct obstack *obstack, void *data);
-void obstack_int_grow (struct obstack *obstack, int data);
-
-void * obstack_finish (struct obstack *obstack);
-
-int obstack_object_size (struct obstack *obstack);
-
-int obstack_room (struct obstack *obstack);
-void obstack_1grow_fast (struct obstack *obstack, int data_char);
-void obstack_ptr_grow_fast (struct obstack *obstack, void *data);
-void obstack_int_grow_fast (struct obstack *obstack, int data);
-void obstack_blank_fast (struct obstack *obstack, int size);
-
-void * obstack_base (struct obstack *obstack);
-void * obstack_next_free (struct obstack *obstack);
-int obstack_alignment_mask (struct obstack *obstack);
-int obstack_chunk_size (struct obstack *obstack);
-
-#endif /* __STDC__ */
-
-/* Non-ANSI C cannot really support alternative functions for these macros,
-   so we do not declare them.  */
-\f
-/* Pointer to beginning of object being allocated or to be allocated next.
-   Note that this might not be the final address of the object
-   because a new chunk might be needed to hold the final size.  */
-
-#define obstack_base(h) ((h)->object_base)
-
-/* Size for allocating ordinary chunks.  */
-
-#define obstack_chunk_size(h) ((h)->chunk_size)
-
-/* Pointer to next byte not yet allocated in current chunk.  */
-
-#define obstack_next_free(h)   ((h)->next_free)
-
-/* Mask specifying low bits that should be clear in address of an object.  */
-
-#define obstack_alignment_mask(h) ((h)->alignment_mask)
-
-#define obstack_init(h) \
-  _obstack_begin ((h), 0, 0, obstack_chunk_alloc, obstack_chunk_free)
-
-#define obstack_begin(h, size) \
-  _obstack_begin ((h), (size), 0, obstack_chunk_alloc, obstack_chunk_free)
-
-#define obstack_1grow_fast(h,achar) (*((h)->next_free)++ = achar)
-
-#define obstack_blank_fast(h,n) ((h)->next_free += (n))
-\f
-#if defined (__GNUC__) && defined (__STDC__)
-
-/* For GNU C, if not -traditional,
-   we can define these macros to compute all args only once
-   without using a global variable.
-   Also, we can avoid using the `temp' slot, to make faster code.  */
-
-#define obstack_object_size(OBSTACK)                                   \
-  ({ struct obstack *__o = (OBSTACK);                                  \
-     (unsigned) (__o->next_free - __o->object_base); })
-
-#define obstack_room(OBSTACK)                                          \
-  ({ struct obstack *__o = (OBSTACK);                                  \
-     (unsigned) (__o->chunk_limit - __o->next_free); })
-
-#define obstack_grow(OBSTACK,where,length)                             \
-({ struct obstack *__o = (OBSTACK);                                    \
-   int __len = (length);                                               \
-   ((__o->next_free + __len > __o->chunk_limit)                                \
-    ? _obstack_newchunk (__o, __len) : 0);                             \
-   bcopy (where, __o->next_free, __len);                               \
-   __o->next_free += __len;                                            \
-   (void) 0; })
-
-#define obstack_grow0(OBSTACK,where,length)                            \
-({ struct obstack *__o = (OBSTACK);                                    \
-   int __len = (length);                                               \
-   ((__o->next_free + __len + 1 > __o->chunk_limit)                    \
-    ? _obstack_newchunk (__o, __len + 1) : 0),                         \
-   bcopy (where, __o->next_free, __len),                               \
-   __o->next_free += __len,                                            \
-   *(__o->next_free)++ = 0;                                            \
-   (void) 0; })
-
-#define obstack_1grow(OBSTACK,datum)                                   \
-({ struct obstack *__o = (OBSTACK);                                    \
-   ((__o->next_free + 1 > __o->chunk_limit)                            \
-    ? _obstack_newchunk (__o, 1) : 0),                                 \
-   *(__o->next_free)++ = (datum);                                      \
-   (void) 0; })
-
-/* These assume that the obstack alignment is good enough for pointers or ints,
-   and that the data added so far to the current object
-   shares that much alignment.  */
-   
-#define obstack_ptr_grow(OBSTACK,datum)                                        \
-({ struct obstack *__o = (OBSTACK);                                    \
-   ((__o->next_free + sizeof (void *) > __o->chunk_limit)              \
-    ? _obstack_newchunk (__o, sizeof (void *)) : 0),                   \
-   *(*(void ***)&__o->next_free)++ = ((void *)datum);                  \
-   (void) 0; })
-
-#define obstack_int_grow(OBSTACK,datum)                                        \
-({ struct obstack *__o = (OBSTACK);                                    \
-   ((__o->next_free + sizeof (int) > __o->chunk_limit)                 \
-    ? _obstack_newchunk (__o, sizeof (int)) : 0),                      \
-   *(*(int **)&__o->next_free)++ = ((int)datum);                               \
-   (void) 0; })
-
-#define obstack_ptr_grow_fast(h,aptr) (*(*(void ***)&(h)->next_free)++ = (void *)aptr)
-#define obstack_int_grow_fast(h,aint) (*(*(int **)&(h)->next_free)++ = (int)aint)
-
-#define obstack_blank(OBSTACK,length)                                  \
-({ struct obstack *__o = (OBSTACK);                                    \
-   int __len = (length);                                               \
-   ((__o->chunk_limit - __o->next_free < __len)                                \
-    ? _obstack_newchunk (__o, __len) : 0);                             \
-   __o->next_free += __len;                                            \
-   (void) 0; })
-
-#define obstack_alloc(OBSTACK,length)                                  \
-({ struct obstack *__h = (OBSTACK);                                    \
-   obstack_blank (__h, (length));                                      \
-   obstack_finish (__h); })
-
-#define obstack_copy(OBSTACK,where,length)                             \
-({ struct obstack *__h = (OBSTACK);                                    \
-   obstack_grow (__h, (where), (length));                              \
-   obstack_finish (__h); })
-
-#define obstack_copy0(OBSTACK,where,length)                            \
-({ struct obstack *__h = (OBSTACK);                                    \
-   obstack_grow0 (__h, (where), (length));                             \
-   obstack_finish (__h); })
-
-#define obstack_finish(OBSTACK)                                        \
-({ struct obstack *__o = (OBSTACK);                                    \
-   void *value = (void *) __o->object_base;                            \
-   __o->next_free                                                      \
-     = __INT_TO_PTR ((__PTR_TO_INT (__o->next_free)+__o->alignment_mask)\
-                    & ~ (__o->alignment_mask));                        \
-   ((__o->next_free - (char *)__o->chunk                               \
-     > __o->chunk_limit - (char *)__o->chunk)                          \
-    ? (__o->next_free = __o->chunk_limit) : 0);                                \
-   __o->object_base = __o->next_free;                                  \
-   value; })
-
-#define obstack_free(OBSTACK, OBJ)                                     \
-({ struct obstack *__o = (OBSTACK);                                    \
-   void *__obj = (OBJ);                                                        \
-   if (__obj > (void *)__o->chunk && __obj < (void *)__o->chunk_limit)  \
-     __o->next_free = __o->object_base = __obj;                                \
-   else (obstack_free) (__o, __obj); })
-\f
-#else /* not __GNUC__ or not __STDC__ */
-
-#define obstack_object_size(h) \
- (unsigned) ((h)->next_free - (h)->object_base)
-
-#define obstack_room(h)                \
- (unsigned) ((h)->chunk_limit - (h)->next_free)
-
-#define obstack_grow(h,where,length)                                   \
-( (h)->temp = (length),                                                        \
-  (((h)->next_free + (h)->temp > (h)->chunk_limit)                     \
-   ? _obstack_newchunk ((h), (h)->temp) : 0),                          \
-  bcopy (where, (h)->next_free, (h)->temp),                            \
-  (h)->next_free += (h)->temp)
-
-#define obstack_grow0(h,where,length)                                  \
-( (h)->temp = (length),                                                        \
-  (((h)->next_free + (h)->temp + 1 > (h)->chunk_limit)                 \
-   ? _obstack_newchunk ((h), (h)->temp + 1) : 0),                      \
-  bcopy (where, (h)->next_free, (h)->temp),                            \
-  (h)->next_free += (h)->temp,                                         \
-  *((h)->next_free)++ = 0)
-
-#define obstack_1grow(h,datum)                                         \
-( (((h)->next_free + 1 > (h)->chunk_limit)                             \
-   ? _obstack_newchunk ((h), 1) : 0),                                  \
-  *((h)->next_free)++ = (datum))
-
-#define obstack_ptr_grow(h,datum)                                      \
-( (((h)->next_free + sizeof (char *) > (h)->chunk_limit)               \
-   ? _obstack_newchunk ((h), sizeof (char *)) : 0),                    \
-  *(*(char ***)&(h)->next_free)++ = ((char *)datum))
-
-#define obstack_int_grow(h,datum)                                      \
-( (((h)->next_free + sizeof (int) > (h)->chunk_limit)                  \
-   ? _obstack_newchunk ((h), sizeof (int)) : 0),                       \
-  *(*(int **)&(h)->next_free)++ = ((int)datum))
-
-#define obstack_ptr_grow_fast(h,aptr) (*(*(char ***)&(h)->next_free)++ = (char *)aptr)
-#define obstack_int_grow_fast(h,aint) (*(*(int **)&(h)->next_free)++ = (int)aint)
-
-#define obstack_blank(h,length)                                                \
-( (h)->temp = (length),                                                        \
-  (((h)->chunk_limit - (h)->next_free < (h)->temp)                     \
-   ? _obstack_newchunk ((h), (h)->temp) : 0),                          \
-  (h)->next_free += (h)->temp)
-
-#define obstack_alloc(h,length)                                                \
- (obstack_blank ((h), (length)), obstack_finish ((h)))
-
-#define obstack_copy(h,where,length)                                   \
- (obstack_grow ((h), (where), (length)), obstack_finish ((h)))
-
-#define obstack_copy0(h,where,length)                                  \
- (obstack_grow0 ((h), (where), (length)), obstack_finish ((h)))
-
-#define obstack_finish(h)                                              \
-( (h)->temp = __PTR_TO_INT ((h)->object_base),                         \
-  (h)->next_free                                                       \
-    = __INT_TO_PTR ((__PTR_TO_INT ((h)->next_free)+(h)->alignment_mask)        \
-                   & ~ ((h)->alignment_mask)),                         \
-  (((h)->next_free - (char *)(h)->chunk                                        \
-    > (h)->chunk_limit - (char *)(h)->chunk)                           \
-   ? ((h)->next_free = (h)->chunk_limit) : 0),                         \
-  (h)->object_base = (h)->next_free,                                   \
-  __INT_TO_PTR ((h)->temp))
-
-#ifdef __STDC__
-#define obstack_free(h,obj)                                            \
-( (h)->temp = (char *)(obj) - (char *) (h)->chunk,                     \
-  (((h)->temp >= 0 && (h)->temp < (h)->chunk_limit - (char *) (h)->chunk)\
-   ? (int) ((h)->next_free = (h)->object_base                          \
-           = (h)->temp + (char *) (h)->chunk)                          \
-   : ((obstack_free) ((h), (h)->temp + (char *) (h)->chunk), 0)))
-#else
-#define obstack_free(h,obj)                                            \
-( (h)->temp = (char *)(obj) - (char *) (h)->chunk,                     \
-  (((h)->temp >= 0 && (h)->temp < (h)->chunk_limit - (char *) (h)->chunk)\
-   ? (int) ((h)->next_free = (h)->object_base                          \
-           = (h)->temp + (char *) (h)->chunk)                          \
-   : (int) _obstack_free ((h), (h)->temp + (char *) (h)->chunk)))
-#endif
-
-#endif /* not __GNUC__ or not __STDC__ */
-
-/* Declare the external functions we use; they are in obstack.c.  */
-
-#ifdef __STDC__
-  extern int _obstack_newchunk (struct obstack *h, int length);
-  extern int _obstack_free (struct obstack *h, void *obj);
-  extern void _obstack_begin (struct obstack *h, int size, int alignment,
-                             void *(*chunkfun) (), void (*freefun) ());
-#else
-  extern int _obstack_newchunk ();
-  extern int _obstack_free ();
-  extern void _obstack_begin ();
-#endif
-
-#endif /* not __OBSTACKS__ */
-
diff --git a/gdb/param-no-tm.h b/gdb/param-no-tm.h
deleted file mode 100755 (executable)
index 96bc85a..0000000
+++ /dev/null
@@ -1,82 +0,0 @@
-/* Copyright (C) 1990 Free Software Foundation, Inc.
-
-This file is part of GDB.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-#if !defined (PARAM_H)
-#define PARAM_H 1
-
-/*  DO NOT #include "tm.h" -- a particular tm file has been inc'd by caller  */
-
-#include "xm.h"
-
-/* TARGET_BYTE_ORDER and HOST_BYTE_ORDER should be defined to one of these.  */
-#if !defined (BIG_ENDIAN)
-#define BIG_ENDIAN 4321
-#endif
-
-#if !defined (LITTLE_ENDIAN)
-#define LITTLE_ENDIAN 1234
-#endif
-
-/* The bit byte-order has to do just with numbering of bits in
-   debugging symbols and such.  Conceptually, it's quite separate
-   from byte/word byte order.  */
-
-#if !defined (BITS_BIG_ENDIAN)
-#if TARGET_BYTE_ORDER == BIG_ENDIAN
-#define BITS_BIG_ENDIAN 1
-#endif /* Big endian.  */
-
-#if TARGET_BYTE_ORDER == LITTLE_ENDIAN
-#define BITS_BIG_ENDIAN 0
-#endif /* Little endian.  */
-#endif /* BITS_BIG_ENDIAN not defined.  */
-
-/* Swap LEN bytes at BUFFER between target and host byte-order.  */
-#if TARGET_BYTE_ORDER == HOST_BYTE_ORDER
-#define SWAP_TARGET_AND_HOST(buffer,len)
-#else /* Target and host byte order differ.  */
-#define SWAP_TARGET_AND_HOST(buffer,len) \
-  {                                                                     \
-    char tmp;                                                           \
-    char *p = (char *)(buffer);                                                 \
-    char *q = ((char *)(buffer)) + len - 1;                             \
-    for (; p < q; p++, q--)                                             \
-      {                                                                         \
-        tmp = *q;                                                       \
-        *q = *p;                                                        \
-        *p = tmp;                                                       \
-      }                                                                         \
-  }
-#endif /* Target and host byte order differ.  */
-
-/* On some machines there are bits in addresses which are not really
-   part of the address, but are used by the kernel, the hardware, etc.
-   for special purposes.  ADDR_BITS_REMOVE takes out any such bits
-   so we get a "real" address such as one would find in a symbol
-   table.  ADDR_BITS_SET sets those bits the way the system wants
-   them.  */
-#if !defined (ADDR_BITS_REMOVE)
-#define ADDR_BITS_REMOVE(addr) (addr)
-#define ADDR_BITS_SET(addr) (addr)
-#endif /* No ADDR_BITS_REMOVE.  */
-
-#if !defined (SYS_SIGLIST_MISSING)
-#define SYS_SIGLIST_MISSING defined (USG)
-#endif /* No SYS_SIGLIST_MISSING */
-
-#endif /* param.h not already included.  */
diff --git a/gdb/param.h b/gdb/param.h
deleted file mode 100755 (executable)
index b408a03..0000000
+++ /dev/null
@@ -1,32 +0,0 @@
-/* Copyright (C) 1990 Free Software Foundation, Inc.
-
-This file is part of GDB.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-/* The standard thing is to include param.h.  However, files that are
-   specific to a particular target can include that tm-xxx.h file and
-   param-no-tm.h.  Any future inclusions of param.h will be protected
-   against by the #if !defined stuff below.  */
-
-/* This file requires defs.h.  */
-
-#if !defined (PARAM_H)
-#include "tm.h"
-#endif
-
-#include "param-no-tm.h"
-
-#define PARAM_H 1
diff --git a/gdb/pn-opcode.h b/gdb/pn-opcode.h
deleted file mode 100755 (executable)
index 77a2770..0000000
+++ /dev/null
@@ -1,282 +0,0 @@
-/* Print GOULD PN (PowerNode) instructions for GDB, the GNU debugger.
-   Copyright (C) 1986, 1987, 1989 Free Software Foundation, Inc.
-
-This file is part of GDB.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-struct gld_opcode
-{
-  char *name;
-  unsigned long opcode;
-  unsigned long mask;
-  char *args;
-  int length;
-};
-
-/* We store four bytes of opcode for all opcodes because that
-   is the most any of them need.  The actual length of an instruction
-   is always at least 2 bytes, and at most four.  The length of the
-   instruction is based on the opcode.
-
-   The mask component is a mask saying which bits must match
-   particular opcode in order for an instruction to be an instance
-   of that opcode.
-
-   The args component is a string containing characters
-   that are used to format the arguments to the instruction. */
-
-/* Kinds of operands:
-   r  Register in first field
-   R  Register in second field
-   b  Base register in first field
-   B  Base register in second field
-   v  Vector register in first field
-   V  Vector register in first field
-   A  Optional address register (base register)
-   X  Optional index register
-   I  Immediate data (16bits signed)
-   O  Offset field (16bits signed)
-   h  Offset field (15bits signed)
-   d  Offset field (14bits signed)
-   S  Shift count field
-
-   any other characters are printed as is...
-*/
-
-/* The assembler requires that this array be sorted as follows:
-   all instances of the same mnemonic must be consecutive.
-   All instances of the same mnemonic with the same number of operands
-   must be consecutive.
- */
-struct gld_opcode gld_opcodes[] =
-{
-{ "abm",       0xa0080000,     0xfc080000,     "f,xOA,X",      4 },
-{ "abr",       0x18080000,     0xfc0c0000,     "r,f",          2 },
-{ "aci",       0xfc770000,     0xfc7f8000,     "r,I",          4 },
-{ "adfd",      0xe0080002,     0xfc080002,     "r,xOA,X",      4 },
-{ "adfw",      0xe0080000,     0xfc080000,     "r,xOA,X",      4 },
-{ "adi",       0xc8010000,     0xfc7f0000,     "r,I",          4 },
-{ "admb",      0xb8080000,     0xfc080000,     "r,xOA,X",      4 },
-{ "admd",      0xb8000002,     0xfc080002,     "r,xOA,X",      4 },
-{ "admh",      0xb8000001,     0xfc080001,     "r,xOA,X",      4 },
-{ "admw",      0xb8000000,     0xfc080000,     "r,xOA,X",      4 },
-{ "adr",       0x38000000,     0xfc0f0000,     "r,R",          2 },
-{ "adrfd",     0x38090000,     0xfc0f0000,     "r,R",          2 },
-{ "adrfw",     0x38010000,     0xfc0f0000,     "r,R",          2 },
-{ "adrm",      0x38080000,     0xfc0f0000,     "r,R",          2 },
-{ "ai",        0xfc030000,     0xfc07ffff,     "I",            4 },
-{ "anmb",      0x84080000,     0xfc080000,     "r,xOA,X",      4 },
-{ "anmd",      0x84000002,     0xfc080002,     "r,xOA,X",      4 },
-{ "anmh",      0x84000001,     0xfc080001,     "r,xOA,X",      4 },
-{ "anmw",      0x84000000,     0xfc080000,     "r,xOA,X",      4 },
-{ "anr",       0x04000000,     0xfc0f0000,     "r,R",          2 },
-{ "armb",      0xe8080000,     0xfc080000,     "r,xOA,X",      4 },
-{ "armd",      0xe8000002,     0xfc080002,     "r,xOA,X",      4 },
-{ "armh",      0xe8000001,     0xfc080001,     "r,xOA,X",      4 },
-{ "armw",      0xe8000000,     0xfc080000,     "r,xOA,X",      4 },
-{ "bcf",       0xf0000000,     0xfc080000,     "I,xOA,X",      4 },
-{ "bct",       0xec000000,     0xfc080000,     "I,xOA,X",      4 },
-{ "bei",       0x00060000,     0xffff0000,     "",             2 },
-{ "bft",       0xf0000000,     0xff880000,     "xOA,X",        4 },
-{ "bib",       0xf4000000,     0xfc780000,     "r,xOA",        4 },
-{ "bid",       0xf4600000,     0xfc780000,     "r,xOA",        4 },
-{ "bih",       0xf4200000,     0xfc780000,     "r,xOA",        4 },
-{ "biw",       0xf4400000,     0xfc780000,     "r,xOA",        4 },
-{ "bl",        0xf8800000,     0xff880000,     "xOA,X",        4 },
-{ "bsub",      0x5c080000,     0xff8f0000,     "",             2 },
-{ "bsubm",     0x28080000,     0xfc080000,     "",             4 },
-{ "bu",        0xec000000,     0xff880000,     "xOA,X",        4 },
-{ "call",      0x28080000,     0xfc0f0000,     "",             2 },
-{ "callm",     0x5c080000,     0xff880000,     "",             4 },
-{ "camb",      0x90080000,     0xfc080000,     "r,xOA,X",      4 },
-{ "camd",      0x90000002,     0xfc080002,     "r,xOA,X",      4 },
-{ "camh",      0x90000001,     0xfc080001,     "r,xOA,X",      4 },
-{ "camw",      0x90000000,     0xfc080000,     "r.xOA,X",      4 },
-{ "car",       0x10000000,     0xfc0f0000,     "r,R",          2 },
-{ "cd",        0xfc060000,     0xfc070000,     "r,f",          4 },
-{ "cea",       0x000f0000,     0xffff0000,     "",             2 },
-{ "ci",        0xc8050000,     0xfc7f0000,     "r,I",          4 },
-{ "cmc",       0x040a0000,     0xfc7f0000,     "r",            2 },
-{ "cmmb",      0x94080000,     0xfc080000,     "r,xOA,X",      4 },
-{ "cmmd",      0x94000002,     0xfc080002,     "r,xOA,X",      4 },
-{ "cmmh",      0x94000001,     0xfc080001,     "r,xOA,X",      4 },
-{ "cmmw",      0x94000000,     0xfc080000,     "r,xOA,X",      4 },
-{ "cmr",       0x14000000,     0xfc0f0000,     "r,R",          2 },
-{ "daci",      0xfc7f0000,     0xfc7f8000,     "r,I",          4 },
-{ "dae",       0x000e0000,     0xffff0000,     "",             2 },
-{ "dai",       0xfc040000,     0xfc07ffff,     "I",            4 },
-{ "dci",       0xfc6f0000,     0xfc7f8000,     "r,I",          4 },
-{ "di",        0xfc010000,     0xfc07ffff,     "I",            4 },
-{ "dvfd",      0xe4000002,     0xfc080002,     "r,xOA,X",      4 },
-{ "dvfw",      0xe4000000,     0xfc080000,     "r,xOA,X",      4 },
-{ "dvi",       0xc8040000,     0xfc7f0000,     "r,I",          4 },
-{ "dvmb",      0xc4080000,     0xfc080000,     "r,xOA,X",      4 },
-{ "dvmh",      0xc4000001,     0xfc080001,     "r,xOA,X",      4 },
-{ "dvmw",      0xc4000000,     0xfc080000,     "r,xOA,X",      4 },
-{ "dvr",       0x380a0000,     0xfc0f0000,     "r,R",          2 },
-{ "dvrfd",     0x380c0000,     0xfc0f0000,     "r,R",          4 },
-{ "dvrfw",     0x38040000,     0xfc0f0000,     "r,xOA,X",      4 },
-{ "eae",       0x00080000,     0xffff0000,     "",             2 },
-{ "eci",       0xfc670000,     0xfc7f8080,     "r,I",          4 },
-{ "ecwcs",     0xfc4f0000,     0xfc7f8000,     "",             4 },
-{ "ei",        0xfc000000,     0xfc07ffff,     "I",            4 },
-{ "eomb",      0x8c080000,     0xfc080000,     "r,xOA,X",      4 },
-{ "eomd",      0x8c000002,     0xfc080002,     "r,xOA,X",      4 },
-{ "eomh",      0x8c000001,     0xfc080001,     "r,xOA,X",      4 },
-{ "eomw",      0x8c000000,     0xfc080000,     "r,xOA,X",      4 },
-{ "eor",       0x0c000000,     0xfc0f0000,     "r,R",          2 },
-{ "eorm",      0x0c080000,     0xfc0f0000,     "r,R",          2 },
-{ "es",        0x00040000,     0xfc7f0000,     "r",            2 },
-{ "exm",       0xa8000000,     0xff880000,     "xOA,X",        4 },
-{ "exr",       0xc8070000,     0xfc7f0000,     "r",            2 },
-{ "exrr",      0xc8070002,     0xfc7f0002,     "r",            2 },
-{ "fixd",      0x380d0000,     0xfc0f0000,     "r,R",          2 },
-{ "fixw",      0x38050000,     0xfc0f0000,     "r,R",          2 },
-{ "fltd",      0x380f0000,     0xfc0f0000,     "r,R",          2 },
-{ "fltw",      0x38070000,     0xfc0f0000,     "r,R",          2 },
-{ "grio",      0xfc3f0000,     0xfc7f8000,     "r,I",          4 },
-{ "halt",      0x00000000,     0xffff0000,     "",             2 },
-{ "hio",       0xfc370000,     0xfc7f8000,     "r,I",          4 },
-{ "jwcs",      0xfa080000,     0xff880000,     "xOA,X",        4 },
-{ "la",        0x50000000,     0xfc000000,     "r,xOA,X",      4 },
-{ "labr",      0x58080000,     0xfc080000,     "b,xOA,X",      4 },
-{ "lb",        0xac080000,     0xfc080000,     "r,xOA,X",      4 },
-{ "lcs",       0x00030000,     0xfc7f0000,     "r",            2 },
-{ "ld",        0xac000002,     0xfc080002,     "r,xOA,X",      4 },
-{ "lear",      0x80000000,     0xfc080000,     "r,xOA,X",      4 },
-{ "lf",        0xcc000000,     0xfc080000,     "r,xOA,X",      4 },
-{ "lfbr",      0xcc080000,     0xfc080000,     "b,xOA,X",      4 },
-{ "lh",        0xac000001,     0xfc080001,     "r,xOA,X",      4 },
-{ "li",        0xc8000000,     0xfc7f0000,     "r,I",          4 },
-{ "lmap",      0x2c070000,     0xfc7f0000,     "r",            2 },
-{ "lmb",       0xb0080000,     0xfc080000,     "r,xOA,X",      4 },
-{ "lmd",       0xb0000002,     0xfc080002,     "r,xOA,X",      4 },
-{ "lmh",       0xb0000001,     0xfc080001,     "r,xOA,X",      4 },
-{ "lmw",       0xb0000000,     0xfc080000,     "r,xOA,X",      4 },
-{ "lnb",       0xb4080000,     0xfc080000,     "r,xOA,X",      4 },
-{ "lnd",       0xb4000002,     0xfc080002,     "r,xOA,X",      4 },
-{ "lnh",       0xb4000001,     0xfc080001,     "r,xOA,X",      4 },
-{ "lnw",       0xb4000000,     0xfc080000,     "r,xOA,X",      4 },
-{ "lpsd",      0xf9800000,     0xff880000,     "r,xOA,X",      4 },
-{ "lpsdcm",    0xfa800000,     0xff880000,     "r,xOA,X",      4 },
-{ "lw",        0xac000000,     0xfc080000,     "r,xOA,X",      4 },
-{ "lwbr",      0x5c000000,     0xfc080000,     "b,xOA,X",      4 },
-{ "mpfd",      0xe4080002,     0xfc080002,     "r,xOA,X",      4 },
-{ "mpfw",      0xe4080000,     0xfc080000,     "r,xOA,X",      4 },
-{ "mpi",       0xc8030000,     0xfc7f0000,     "r,I",          4 },
-{ "mpmb",      0xc0080000,     0xfc080000,     "r,xOA,X",      4 },
-{ "mpmh",      0xc0000001,     0xfc080001,     "r,xOA,X",      4 },
-{ "mpmw",      0xc0000000,     0xfc080000,     "r,xOA,X",      4 },
-{ "mpr",       0x38020000,     0xfc0f0000,     "r,R",          2 },
-{ "mprfd",     0x380e0000,     0xfc0f0000,     "r,R",          2 },
-{ "mprfw",     0x38060000,     0xfc0f0000,     "r,R",          2 },
-{ "nop",       0x00020000,     0xffff0000,     "",             2 },
-{ "ormb",      0x88080000,     0xfc080000,     "r,xOA,X",      4 },
-{ "ormd",      0x88000002,     0xfc080002,     "r,xOA,X",      4 },
-{ "ormh",      0x88000001,     0xfc080001,     "r,xOA,X",      4 },
-{ "ormw",      0x88000000,     0xfc080000,     "r,xOA,X",      4 },
-{ "orr",       0x08000000,     0xfc0f0000,     "r,R",          2 },
-{ "orrm",      0x08080000,     0xfc0f0000,     "r,R",          2 },
-{ "rdsts",     0x00090000,     0xfc7f0000,     "r",            2 },
-{ "return",    0x280e0000,     0xfc7f0000,     "",             2 },
-{ "ri",        0xfc020000,     0xfc07ffff,     "I",            4 },
-{ "rnd",       0x00050000,     0xfc7f0000,     "r",            2 },
-{ "rpswt",     0x040b0000,     0xfc7f0000,     "r",            2 },
-{ "rschnl",    0xfc2f0000,     0xfc7f8000,     "r,I",          4 },
-{ "rsctl",     0xfc470000,     0xfc7f8000,     "r,I",          4 },
-{ "rwcs",      0x000b0000,     0xfc0f0000,     "r,R",          2 },
-{ "sacz",      0x10080000,     0xfc0f0000,     "r,R",          2 },
-{ "sbm",       0x98080000,     0xfc080000,     "f,xOA,X",      4 },
-{ "sbr",       0x18000000,     0xfc0c0000,     "r,f",          4 },
-{ "sea",       0x000d0000,     0xffff0000,     "",             2 },
-{ "setcpu",    0x2c090000,     0xfc7f0000,     "r",            2 },
-{ "sio",       0xfc170000,     0xfc7f8000,     "r,I",          4 },
-{ "sipu",      0x000a0000,     0xffff0000,     "",             2 },
-{ "sla",       0x1c400000,     0xfc600000,     "r,S",          2 },
-{ "slad",      0x20400000,     0xfc600000,     "r,S",          2 },
-{ "slc",       0x24400000,     0xfc600000,     "r,S",          2 },
-{ "sll",       0x1c600000,     0xfc600000,     "r,S",          2 },
-{ "slld",      0x20600000,     0xfc600000,     "r,S",          2 },
-{ "smc",       0x04070000,     0xfc070000,     "",             2 },
-{ "sra",       0x1c000000,     0xfc600000,     "r,S",          2 },
-{ "srad",      0x20000000,     0xfc600000,     "r,S",          2 },
-{ "src",       0x24000000,     0xfc600000,     "r,S",          2 },
-{ "srl",       0x1c200000,     0xfc600000,     "r,S",          2 },
-{ "srld",      0x20200000,     0xfc600000,     "r,S",          2 },
-{ "stb",       0xd4080000,     0xfc080000,     "r,xOA,X",      4 },
-{ "std",       0xd4000002,     0xfc080002,     "r,xOA,X",      4 },
-{ "stf",       0xdc000000,     0xfc080000,     "r,xOA,X",      4 },
-{ "stfbr",     0x54000000,     0xfc080000,     "b,xOA,X",      4 },
-{ "sth",       0xd4000001,     0xfc080001,     "r,xOA,X",      4 },
-{ "stmb",      0xd8080000,     0xfc080000,     "r,xOA,X",      4 },
-{ "stmd",      0xd8000002,     0xfc080002,     "r,xOA,X",      4 },
-{ "stmh",      0xd8000001,     0xfc080001,     "r,xOA,X",      4 },
-{ "stmw",      0xd8000000,     0xfc080000,     "r,xOA,X",      4 },
-{ "stpio",     0xfc270000,     0xfc7f8000,     "r,I",          4 },
-{ "stw",       0xd4000000,     0xfc080000,     "r,xOA,X",      4 },
-{ "stwbr",     0x54000000,     0xfc080000,     "b,xOA,X",      4 },
-{ "suabr",     0x58000000,     0xfc080000,     "b,xOA,X",      4 },
-{ "sufd",      0xe0000002,     0xfc080002,     "r,xOA,X",      4 },
-{ "sufw",      0xe0000000,     0xfc080000,     "r,xOA,X",      4 },
-{ "sui",       0xc8020000,     0xfc7f0000,     "r,I",          4 },
-{ "sumb",      0xbc080000,     0xfc080000,     "r,xOA,X",      4 },
-{ "sumd",      0xbc000002,     0xfc080002,     "r,xOA,X",      4 },
-{ "sumh",      0xbc000001,     0xfc080001,     "r,xOA,X",      4 },
-{ "sumw",      0xbc000000,     0xfc080000,     "r,xOA,X",      4 },
-{ "sur",       0x3c000000,     0xfc0f0000,     "r,R",          2 },
-{ "surfd",     0x380b0000,     0xfc0f0000,     "r,xOA,X",      4 },
-{ "surfw",     0x38030000,     0xfc0f0000,     "r,R",          2 },
-{ "surm",      0x3c080000,     0xfc0f0000,     "r,R",          2 },
-{ "svc",       0xc8060000,     0xffff0000,     "",             4 },
-{ "tbm",       0xa4080000,     0xfc080000,     "f,xOA,X",      4 },
-{ "tbr",       0x180c0000,     0xfc0c0000,     "r,f",          2 },
-{ "tbrr",      0x2c020000,     0xfc0f0000,     "r,B",          2 },
-{ "tccr",      0x28040000,     0xfc7f0000,     "",             2 },
-{ "td",        0xfc050000,     0xfc070000,     "r,f",          4 },
-{ "tio",       0xfc1f0000,     0xfc7f8000,     "r,I",          4 },
-{ "tmapr",     0x2c0a0000,     0xfc0f0000,     "r,R",          2 },
-{ "tpcbr",     0x280c0000,     0xfc7f0000,     "r",            2 },
-{ "trbr",      0x2c010000,     0xfc0f0000,     "b,R",          2 },
-{ "trc",       0x2c030000,     0xfc0f0000,     "r,R",          2 },
-{ "trcc",      0x28050000,     0xfc7f0000,     "",             2 },
-{ "trcm",      0x2c0b0000,     0xfc0f0000,     "r,R",          2 },
-{ "trn",       0x2c040000,     0xfc0f0000,     "r,R",          2 },
-{ "trnm",      0x2c0c0000,     0xfc0f0000,     "r,R",          2 },
-{ "trr",       0x2c000000,     0xfc0f0000,     "r,R",          2 },
-{ "trrm",      0x2c080000,     0xfc0f0000,     "r,R",          2 },
-{ "trsc",      0x2c0e0000,     0xfc0f0000,     "r,R",          2 },
-{ "trsw",      0x28000000,     0xfc7f0000,     "r",            2 },
-{ "tscr",      0x2c0f0000,     0xfc0f0000,     "r,R",          2 },
-{ "uei",       0x00070000,     0xffff0000,     "",             2 },
-{ "wait",      0x00010000,     0xffff0000,     "",             2 },
-{ "wcwcs",     0xfc5f0000,     0xfc7f8000,     "",             4 },
-{ "wwcs",      0x000c0000,     0xfc0f0000,     "r,R",          2 },
-{ "xcbr",      0x28020000,     0xfc0f0000,     "b,B",          2 },
-{ "xcr",       0x2c050000,     0xfc0f0000,     "r,R",          2 },
-{ "xcrm",      0x2c0d0000,     0xfc0f0000,     "r,R",          2 },
-{ "zbm",       0x9c080000,     0xfc080000,     "f,xOA,X",      4 },
-{ "zbr",       0x18040000,     0xfc0c0000,     "r,f",          2 },
-{ "zmb",       0xf8080000,     0xfc080000,     "r,xOA,X",      4 },
-{ "zmd",       0xf8000002,     0xfc080002,     "r,xOA,X",      4 },
-{ "zmh",       0xf8000001,     0xfc080001,     "r,xOA,X",      4 },
-{ "zmw",       0xf8000000,     0xfc080000,     "r,xOA,X",      4 },
-{ "zr",        0x0c000000,     0xfc0f0000,     "r",            2 },
-};
-
-int numopcodes = sizeof(gld_opcodes) / sizeof(gld_opcodes[0]);
-
-struct gld_opcode *endop = gld_opcodes + sizeof(gld_opcodes) /
-               sizeof(gld_opcodes[0]);
diff --git a/gdb/pyr-opcode.h b/gdb/pyr-opcode.h
deleted file mode 100755 (executable)
index 06632b8..0000000
+++ /dev/null
@@ -1,287 +0,0 @@
-/* pyramid.opcode.h -- gdb initial attempt. */
-
-/* pyramid opcode table: wot to do with this
-   particular opcode */
-
-struct pyr_datum
-{
-  char              nargs;
-  char *            args;      /* how to compile said opcode */
-  unsigned long     mask;      /* Bit vector: which operand modes are valid
-                                  for this opcode */
-  unsigned char     code;      /* op-code (always 6(?) bits */
-};
-
-typedef struct pyr_insn_format {
-    unsigned int mode :4;
-    unsigned int operator :8;
-    unsigned int index_scale :2;
-    unsigned int index_reg :6;
-    unsigned int operand_1 :6;
-    unsigned int operand_2:6;
-} pyr_insn_format;
-       
-
-/* We store four bytes of opcode for all opcodes.
-   Pyramid is sufficiently RISCy that:
-      - insns are always an integral number of words;
-      - the length of any insn can be told from the first word of
-        the insn. (ie, if there are zero, one, or two words of
-       immediate operand/offset).
-
-   
-   The args component is a string containing two characters for each
-   operand of the instruction.  The first specifies the kind of operand;
-   the second, the place it is stored. */
-
-/* Kinds of operands:
-   mask         assembler syntax       description
-   0x0001:  movw Rn,Rn         register to register
-   0x0002:  movw K,Rn          quick immediate to register
-   0x0004:  movw I,Rn          long immediate to register
-   0x0008:  movw (Rn),Rn       register indirect to register
-           movw (Rn)[x],Rn     register indirect to register
-   0x0010:  movw I(Rn),Rn      offset register indirect to register
-           movw I(Rn)[x],Rn    offset register indirect, indexed, to register
-
-   0x0020:  movw Rn,(Rn)       register to register indirect                
-   0x0040:  movw K,(Rn)                quick immediate to register indirect         
-   0x0080:  movw I,(Rn)                long immediate to register indirect          
-   0x0100:  movw (Rn),(Rn)     register indirect to-register indirect       
-   0x0100:  movw (Rn),(Rn)     register indirect to-register indirect       
-   0x0200:  movw I(Rn),(Rn)    register indirect+offset to register indirect
-   0x0200:  movw I(Rn),(Rn)    register indirect+offset to register indirect
-
-   0x0400:  movw Rn,I(Rn)      register to register indirect+offset
-   0x0800:  movw K,I(Rn)       quick immediate to register indirect+offset
-   0x1000:  movw I,I(Rn)       long immediate to register indirect+offset
-   0x1000:  movw (Rn),I(Rn)    register indirect to-register indirect+offset
-   0x1000:  movw I(Rn),I(Rn)   register indirect+offset to register indirect
-                                       +offset
-   0x0000:  (irregular)                ???
-   
-
-   Each insn has a four-bit field encoding the type(s) of its operands.
-*/
-
-/* Some common combinations
-   */
-
-/* the first 5,(0x1|0x2|0x4|0x8|0x10) ie (1|2|4|8|16), ie ( 32 -1)*/
-#define GEN_TO_REG (31)
-
-#define        UNKNOWN ((unsigned long)-1)
-#define ANY (GEN_TO_REG | (GEN_TO_REG << 5) | (GEN_TO_REG << 15))
-
-#define CONVERT (1|8|0x10|0x20|0x200)
-
-#define K_TO_REG (2)
-#define I_TO_REG (4)
-#define NOTK_TO_REG (GEN_TO_REG & ~K_TO_REG)
-#define NOTI_TO_REG (GEN_TO_REG & ~I_TO_REG)
-
-/* The assembler requires that this array be sorted as follows:
-   all instances of the same mnemonic must be consecutive.
-   All instances of the same mnemonic with the same number of operands
-   must be consecutive.
- */
-
-struct pyr_opcode              /* pyr opcode text */
-{
-  char *            name;      /* opcode name: lowercase string  [key]  */
-  struct pyr_datum  datum;     /* rest of opcode table          [datum] */
-};
-
-#define pyr_how args
-#define pyr_nargs nargs
-#define pyr_mask mask
-#define pyr_name name
-
-struct pyr_opcode pyr_opcodes[] =
-{
-  {"movb",     { 2, "", UNKNOWN,               0x11}, },
-  {"movh",     { 2, "", UNKNOWN,               0x12} },
-  {"movw",     { 2, "", ANY,                   0x10} },
-  {"movl",     { 2, "", ANY,                   0x13} },
-  {"mnegw",    { 2, "", (0x1|0x8|0x10),        0x14} },
-  {"mnegf",    { 2, "", 0x1,                   0x15} },
-  {"mnegd",    { 2, "", 0x1,                   0x16} },
-  {"mcomw",    { 2, "", (0x1|0x8|0x10),        0x17} },
-  {"mabsw",    { 2, "", (0x1|0x8|0x10),        0x18} },
-  {"mabsf",    { 2, "", 0x1,                   0x19} },
-  {"mabsd",    { 2, "", 0x1,                   0x1a} },
-  {"mtstw",    { 2, "", (0x1|0x8|0x10),        0x1c} },
-  {"mtstf",    { 2, "", 0x1,                   0x1d} },
-  {"mtstd",    { 2, "", 0x1,                   0x1e} },
-  {"mova",     { 2, "", 0x8|0x10,              0x1f} },
-  {"movzbw",   { 2, "", (0x1|0x8|0x10),        0x20} },
-  {"movzhw",   { 2, "", (0x1|0x8|0x10),        0x21} },
-                               /* 2 insns out of order here */
-  {"movbl",    { 2, "", 1,                     0x4f} },
-  {"filbl",    { 2, "", 1,                     0x4e} },
-
-  {"cvtbw",    { 2, "", CONVERT,               0x22} },
-  {"cvthw",    { 2, "", CONVERT,               0x23} },
-  {"cvtwb",    { 2, "", CONVERT,               0x24} },
-  {"cvtwh",    { 2, "", CONVERT,               0x25} },
-  {"cvtwf",    { 2, "", CONVERT,               0x26} },
-  {"cvtwd",    { 2, "", CONVERT,               0x27} },
-  {"cvtfw",    { 2, "", CONVERT,               0x28} },
-  {"cvtfd",    { 2, "", CONVERT,               0x29} },
-  {"cvtdw",    { 2, "", CONVERT,               0x2a} },
-  {"cvtdf",    { 2, "", CONVERT,               0x2b} },
-
-  {"addw",     { 2, "", GEN_TO_REG,            0x40} },
-  {"addwc",    { 2, "", GEN_TO_REG,            0x41} },
-  {"subw",     { 2, "", GEN_TO_REG,            0x42} },
-  {"subwb",    { 2, "", GEN_TO_REG,            0x43} },
-  {"rsubw",    { 2, "", GEN_TO_REG,            0x44} },
-  {"mulw",     { 2, "", GEN_TO_REG,            0x45} },
-  {"emul",     { 2, "", GEN_TO_REG,            0x47} },
-  {"umulw",    { 2, "", GEN_TO_REG,            0x46} },
-  {"divw",     { 2, "", GEN_TO_REG,            0x48} },
-  {"ediv",     { 2, "", GEN_TO_REG,            0x4a} },
-  {"rdivw",    { 2, "", GEN_TO_REG,            0x4b} },
-  {"udivw",    { 2, "", GEN_TO_REG,            0x49} },
-  {"modw",     { 2, "", GEN_TO_REG,            0x4c} },
-  {"umodw",    { 2, "", GEN_TO_REG,            0x4d} },
-
-
-  {"addf",     { 2, "", 1,                     0x50} },
-  {"addd",     { 2, "", 1,                     0x51} },
-  {"subf",     { 2, "", 1,                     0x52} },
-  {"subd",     { 2, "", 1,                     0x53} },
-  {"mulf",     { 2, "", 1,                     0x56} },
-  {"muld",     { 2, "", 1,                     0x57} },
-  {"divf",     { 2, "", 1,                     0x58} },
-  {"divd",     { 2, "", 1,                     0x59} },
-
-
-  {"cmpb",     { 2, "", UNKNOWN,               0x61} },
-  {"cmph",     { 2, "", UNKNOWN,               0x62} },
-  {"cmpw",     { 2, "", UNKNOWN,               0x60} },
-  {"ucmpb",    { 2, "", UNKNOWN,               0x66} },
-  /* WHY no "ucmph"??? */
-  {"ucmpw",    { 2, "", UNKNOWN,               0x65} },
-  {"xchw",     { 2, "", UNKNOWN,               0x0f} },
-
-
-  {"andw",     { 2, "", GEN_TO_REG,            0x30} },
-  {"orw",      { 2, "", GEN_TO_REG,            0x31} },
-  {"xorw",     { 2, "", GEN_TO_REG,            0x32} },
-  {"bicw",     { 2, "", GEN_TO_REG,            0x33} },
-  {"lshlw",    { 2, "", GEN_TO_REG,            0x38} },
-  {"ashlw",    { 2, "", GEN_TO_REG,            0x3a} },
-  {"ashll",    { 2, "", GEN_TO_REG,            0x3c} },
-  {"ashrw",    { 2, "", GEN_TO_REG,            0x3b} },
-  {"ashrl",    { 2, "", GEN_TO_REG,            0x3d} },
-  {"rotlw",    { 2, "", GEN_TO_REG,            0x3e} },
-  {"rotrw",    { 2, "", GEN_TO_REG,            0x3f} },
-
-  /* push and pop insns are "going away next release". */
-  {"pushw",    { 2, "", GEN_TO_REG,            0x0c} },
-  {"popw",     { 2, "", (0x1|0x8|0x10),        0x0d} },
-  {"pusha",    { 2, "", (0x8|0x10),            0x0e} },
-
-  {"bitsw",    { 2, "", UNKNOWN,               0x35} },
-  {"bitcw",    { 2, "", UNKNOWN,               0x36} },
-  /* some kind of ibra/dbra insns??*/
-  {"icmpw",    { 2, "", UNKNOWN,               0x67} },
-  {"dcmpw",    { 2, "", (1|4|0x20|0x80|0x400|0x1000),  0x69} },/*FIXME*/
-  {"acmpw",    { 2, "", 1,                     0x6b} },
-
-  /* Call is written as a 1-op insn, but is always (dis)assembled as a 2-op
-     insn with a 2nd op of tr14.   The assembler will have to grok this.  */
-  {"call",     { 2, "", GEN_TO_REG,            0x04} },
-  {"call",     { 1, "", GEN_TO_REG,            0x04} },
-
-  {"callk",    { 1, "", UNKNOWN,               0x06} },/* system call?*/
-  /* Ret is usually written as a 0-op insn, but gets disassembled as a
-     1-op insn. The operand is always tr15. */
-  {"ret",      { 0, "", UNKNOWN,               0x09} },
-  {"ret",      { 1, "", UNKNOWN,               0x09} },
-  {"adsf",     { 2, "", (1|2|4),               0x08} },
-  {"retd",     { 2, "", UNKNOWN,               0x0a} },
-  {"btc",      { 2, "", UNKNOWN,               0x01} },
-  {"bfc",      { 2, "", UNKNOWN,               0x02} },
-  /* Careful: halt is 0x00000000. Jump must have some other (mode?)bit set?? */
-  {"jump",     { 1, "", UNKNOWN,               0x00} },
-  {"btp",      { 2, "", UNKNOWN,               0xf00} },
-  /* read control-stack pointer is another 1-or-2 operand insn. */
-  {"rcsp",     { 2, "", UNKNOWN,               0x01f} },
-  {"rcsp",     { 1, "", UNKNOWN,               0x01f} }
-};
-
-/* end: pyramid.opcode.h */
-/* One day I will have to take the time to find out what operands
-   are valid for these insns, and guess at what they mean.
-
-   I can't imagine what the "I???" insns (iglob, etc) do.
-
-   the arithmetic-sounding insns ending in "p" sound awfully like BCD
-   arithmetic insns:
-       dshlp -> Decimal SHift Left Packed
-       dshrp -> Decimal SHift Right Packed
-   and cvtlp would be convert long to packed.
-   I have no idea how the operands are interpreted; but having them be
-   a long register with (address, length) of an in-memory packed BCD operand
-   would not be surprising.
-   They are unlikely to be a packed bcd string: 64 bits of long give
-   is only 15 digits+sign, which isn't enough for COBOL.
- */ 
-#if 0
-  {"wcsp",     { 2, "", UNKNOWN,               0x00} }, /*write csp?*/
-  /* The OSx Operating System Porting Guide claims SSL does things
-     with tr12 (a register reserved to it) to do with static block-structure
-     references.  SSL=Set Static Link?  It's "Going away next release". */
-  {"ssl",      { 2, "", UNKNOWN,               0x00} },
-  {"ccmps",    { 2, "", UNKNOWN,               0x00} },
-  {"lcd",      { 2, "", UNKNOWN,               0x00} },
-  {"uemul",    { 2, "", UNKNOWN,               0x00} }, /*unsigned emul*/
-  {"srf",      { 2, "", UNKNOWN,               0x00} }, /*Gidget time???*/
-  {"mnegp",    { 2, "", UNKNOWN,               0x00} }, /move-neg phys?*/
-  {"ldp",      { 2, "", UNKNOWN,               0x00} }, /*load phys?*/
-  {"ldti",     { 2, "", UNKNOWN,               0x00} },
-  {"ldb",      { 2, "", UNKNOWN,               0x00} },
-  {"stp",      { 2, "", UNKNOWN,               0x00} },
-  {"stti",     { 2, "", UNKNOWN,               0x00} },
-  {"stb",      { 2, "", UNKNOWN,               0x00} },
-  {"stu",      { 2, "", UNKNOWN,               0x00} },
-  {"addp",     { 2, "", UNKNOWN,               0x00} },
-  {"subp",     { 2, "", UNKNOWN,               0x00} },
-  {"mulp",     { 2, "", UNKNOWN,               0x00} },
-  {"divp",     { 2, "", UNKNOWN,               0x00} },
-  {"dshlp",    { 2, "", UNKNOWN,               0x00} },  /* dec shl packed? */
-  {"dshrp",    { 2, "", UNKNOWN,               0x00} }, /* dec shr packed? */
-  {"movs",     { 2, "", UNKNOWN,               0x00} }, /*move (string?)?*/
-  {"cmpp",     { 2, "", UNKNOWN,               0x00} }, /* cmp phys?*/
-  {"cmps",     { 2, "", UNKNOWN,               0x00} }, /* cmp (string?)?*/
-  {"cvtlp",    { 2, "", UNKNOWN,               0x00} }, /* cvt long to p??*/
-  {"cvtpl",    { 2, "", UNKNOWN,               0x00} }, /* cvt p to l??*/
-  {"dintr",    { 2, "", UNKNOWN,               0x00} }, /* ?? intr ?*/
-  {"rphysw",   { 2, "", UNKNOWN,               0x00} }, /* read phys word?*/
-  {"wphysw",   { 2, "", UNKNOWN,               0x00} }, /* write phys word?*/
-  {"cmovs",    { 2, "", UNKNOWN,               0x00} },
-  {"rsubw",    { 2, "", UNKNOWN,               0x00} },
-  {"bicpsw",   { 2, "", UNKNOWN,               0x00} }, /* clr bit in psw? */
-  {"bispsw",   { 2, "", UNKNOWN,               0x00} }, /* set bit in psw? */
-  {"eio",      { 2, "", UNKNOWN,               0x00} }, /* ?? ?io ? */
-  {"callp",    { 2, "", UNKNOWN,               0x00} }, /* call phys?*/
-  {"callr",    { 2, "", UNKNOWN,               0x00} },
-  {"lpcxt",    { 2, "", UNKNOWN,               0x00} }, /*load proc context*/
-  {"rei",      { 2, "", UNKNOWN,               0x00} }, /*ret from intrpt*/
-  {"rport",    { 2, "", UNKNOWN,               0x00} }, /*read-port?*/
-  {"rtod",     { 2, "", UNKNOWN,               0x00} }, /*read-time-of-day?*/
-  {"ssi",      { 2, "", UNKNOWN,               0x00} },
-  {"vtpa",     { 2, "", UNKNOWN,               0x00} }, /*virt-to-phys-addr?*/
-  {"wicl",     { 2, "", UNKNOWN,               0x00} }, /* write icl ? */
-  {"wport",    { 2, "", UNKNOWN,               0x00} }, /*write-port?*/
-  {"wtod",     { 2, "", UNKNOWN,               0x00} }, /*write-time-of-day?*/
-  {"flic",     { 2, "", UNKNOWN,               0x00} },
-  {"iglob",    { 2, "", UNKNOWN,               0x00} }, /* I global? */
-  {"iphys",    { 2, "", UNKNOWN,               0x00} }, /* I physical? */
-  {"ipid",     { 2, "", UNKNOWN,               0x00} }, /* I pid? */
-  {"ivect",    { 2, "", UNKNOWN,               0x00} }, /* I vector? */
-  {"lamst",    { 2, "", UNKNOWN,               0x00} },
-  {"tio",      { 2, "", UNKNOWN,               0x00} },
-#endif
diff --git a/gdb/rem-m68k.shar b/gdb/rem-m68k.shar
deleted file mode 100755 (executable)
index aeb76e5..0000000
+++ /dev/null
@@ -1,893 +0,0 @@
-# This is a shell archive.  Remove anything before this line,
-# then unpack it by saving it in a file and typing "sh file".
-#
-# Wrapped by Glenn Engel <glenne@labgre> on Mon Jun 12 15:19:20 1989
-#
-# This archive contains:
-#      remcom.c        
-#
-
-LANG=""; export LANG
-PATH=/bin:/usr/bin:$PATH; export PATH
-
-echo x - remcom.c
-cat >remcom.c <<'@EOF'
-
-/****************************************************************************
-
-               THIS SOFTWARE IS NOT COPYRIGHTED  
-   
-   HP offers the following for use in the public domain.  HP makes no
-   warranty with regard to the software or it's performance and the 
-   user accepts the software "AS IS" with all faults.
-
-   HP DISCLAIMS ANY WARRANTIES, EXPRESS OR IMPLIED, WITH REGARD
-   TO THIS SOFTWARE INCLUDING BUT NOT LIMITED TO THE WARRANTIES
-   OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
-
-****************************************************************************/
-
-/****************************************************************************
- *  $Header$                   
- *
- *  $Module name: remcom.c $  
- *  $Revision$
- *  $Date$
- *  $Contributor:     Lake Stevens Instrument Division$
- *  
- *  $Description:     low level support for gdb debugger. $
- *
- *  $Considerations:  only works on target hardware $
- *
- *  $Written by:      Glenn Engel $
- *  $ModuleState:     Experimental $ 
- *
- *  $NOTES:           See Below $
- * 
- *  To enable debugger support, two things need to happen.  One, a
- *  call to set_debug_traps() is necessary in order to allow any breakpoints
- *  or error conditions to be properly intercepted and reported to gdb.
- *  Two, a breakpoint needs to be generated to begin communication.  This
- *  is most easily accomplished by a call to breakpoint().  Breakpoint()
- *  simulates a breakpoint by executing a trap #1.
- *  
- *  Some explanation is probably necessary to explain how exceptions are
- *  handled.  When an exception is encountered the 68000 pushes the current
- *  program counter and status register onto the supervisor stack and then
- *  transfers execution to a location specified in it's vector table.
- *  The handlers for the exception vectors are hardwired to jmp to an address
- *  given by the relation:  (exception - 256) * 6.  These are decending 
- *  addresses starting from -6, -12, -18, ...  By allowing 6 bytes for
- *  each entry, a jsr, jmp, bsr, ... can be used to enter the exception 
- *  handler.  Using a jsr to handle an exception has an added benefit of
- *  allowing a single handler to service several exceptions and use the
- *  return address as the key differentiation.  The vector number can be
- *  computed from the return address by [ exception = (addr + 1530) / 6 ].
- *  The sole purpose of the routine _catchException is to compute the
- *  exception number and push it on the stack in place of the return address.
- *  The external function exceptionHandler() is
- *  used to attach a specific handler to a specific 68k exception.
- *  For 68020 machines, the ability to have a return address around just
- *  so the vector can be determined is not necessary because the '020 pushes an
- *  extra word onto the stack containing the vector offset
- * 
- *  Because gdb will sometimes write to the stack area to execute function
- *  calls, this program cannot rely on using the supervisor stack so it
- *  uses it's own stack area reserved in the int array remcomStack.  
- * 
- *************
- *
- *    The following gdb commands are supported:
- * 
- * command          function                               Return value
- * 
- *    g             return the value of the CPU registers  hex data or ENN
- *    G             set the value of the CPU registers     OK or ENN
- * 
- *    mAA..AA,LLLL  Read LLLL bytes at address AA..AA      hex data or ENN
- *    MAA..AA,LLLL: Write LLLL bytes at address AA.AA      OK or ENN
- * 
- *    c             Resume at current address              SNN   ( signal NN)
- *    cAA..AA       Continue at address AA..AA             SNN
- * 
- *    s             Step one instruction                   SNN
- *    sAA..AA       Step one instruction from AA..AA       SNN
- * 
- *    k             kill
- *
- *    ?             What was the last sigval ?             SNN   (signal NN)
- * 
- * All commands and responses are sent with a packet which includes a 
- * checksum.  A packet consists of 
- * 
- * $<packet info>#<checksum>.
- * 
- * where
- * <packet info> :: <characters representing the command or response>
- * <checksum>    :: < two hex digits computed as modulo 256 sum of <packetinfo>>
- * 
- * When a packet is received, it is first acknowledged with either '+' or '-'.
- * '+' indicates a successful transfer.  '-' indicates a failed transfer.
- * 
- * Example:
- * 
- * Host:                  Reply:
- * $m0,10#2a               +$00010203040506070809101112131415#42
- * 
- ****************************************************************************/
-
-#include <stdio.h>
-#include <string.h>
-#include <setjmp.h>
-
-/************************************************************************
- *
- * external low-level support routines 
- */
-typedef void (*ExceptionHook)(int);   /* pointer to function with int parm */
-typedef void (*Function)();           /* pointer to a function */
-
-extern putDebugChar();   /* write a single character      */
-extern getDebugChar();   /* read and return a single char */
-
-extern Function exceptionHandler();  /* assign an exception handler */
-extern ExceptionHook exceptionHook;  /* hook variable for errors/exceptions */
-
-
-/************************************************************************/
-/* BUFMAX defines the maximum number of characters in inbound/outbound buffers*/
-/* at least NUMREGBYTES*2 are needed for register packets */
-#define BUFMAX 400
-
-static char initialized;  /* boolean flag. != 0 means we've been initialized */
-
-int     remote_debug = 0;
-/*  debug >  0 prints ill-formed commands in valid packets & checksum errors */ 
-
-char hexchars[]="0123456789abcdef";
-
-/* there are 180 bytes of registers on a 68020 w/68881      */
-/* many of the fpa registers are 12 byte (96 bit) registers */
-#define NUMREGBYTES 180
-enum regnames {D0,D1,D2,D3,D4,D5,D6,D7, 
-               A0,A1,A2,A3,A4,A5,A6,A7, 
-               PS,PC,
-               FP0,FP1,FP2,FP3,FP4,FP5,FP6,FP7,
-               FPCONTROL,FPSTATUS,FPIADDR
-              };
-
-typedef struct FrameStruct
-{
-    struct FrameStruct  *previous;
-    int       exceptionPC;      /* pc value when this frame created */
-    int       exceptionVector;  /* cpu vector causing exception     */
-    short     frameSize;        /* size of cpu frame in words       */
-    short     sr;               /* for 68000, this not always sr    */
-    int       pc;
-    short     format;
-    int       fsaveHeader;
-    int       morejunk[0];        /* exception frame, fp save... */
-} Frame;
-
-#define FRAMESIZE 500
-static Frame *lastFrame;
-static int   frameStack[FRAMESIZE];
-
-/*
- * these should not be static cuz they can be used outside this module
- */
-int registers[NUMREGBYTES/4];
-int superStack;
-
-static int remcomStack[400];
-static int* stackPtr = &remcomStack[399];
-
-/*
- * In many cases, the system will want to continue exception processing
- * when a continue command is given.  
- * oldExceptionHook is a function to invoke in this case.
- */
-
-static ExceptionHook oldExceptionHook;
-
-/* the size of the exception stack on the 68020 varies with the type of
- * exception.  The following table is the number of WORDS used
- * for each exception format.
- */
-static short exceptionSize[] = { 4,4,6,4,4,4,4,4,29,10,16,46,4,4,4,4 };
-
-/************* jump buffer used for setjmp/longjmp **************************/
-jmp_buf env;
-
-/***************************  ASSEMBLY CODE MACROS *************************/
-/*                                                                        */
-
-#ifdef __HAVE_68881__
-/* do an fsave, then remember the address to begin a restore from */
-#define SAVE_FP_REGS()    asm(" fsave   a0@-");                \
-                         asm(" fmovemx fp0-fp7,_registers+72");        \
-                         asm(" fmoveml fpcr/fpsr/fpi,_registers+168"); 
-#define RESTORE_FP_REGS() asm(" fmoveml _registers+168,fpcr/fpsr/fpi"); \
-                         asm(" fmovemx _registers+72,fp0-fp7");        \
-                         asm(" frestore a0@+");
-#else
-#define SAVE_FP_REGS()
-#define RESTORE_FP_REGS()
-#endif /* __HAVE_68881__ */
-
-asm("
-.text
-.globl _return_to_super
-_return_to_super:
-        movel   _registers+60,sp /* get new stack pointer */        
-        movel   _lastFrame,a0   /* get last frame info  */              
-        bra     return_to_any
-
-.globl _return_to_user
-_return_to_user:
-        movel   _registers+60,a0 /* get usp */                          
-        movel   a0,usp           /* set usp */                         
-        movel   _superStack,sp  /* get original stack pointer */        
-
-return_to_any:
-        movel   _lastFrame,a0   /* get last frame info  */              
-        movel   a0@+,_lastFrame /* link in previous frame     */        
-        addql   #8,a0           /* skip over pc, vector#*/              
-        movew   a0@+,d0         /* get # of words in cpu frame */       
-        addw    d0,a0           /* point to end of data        */       
-        addw    d0,a0           /* point to end of data        */       
-        movel   a0,a1                                                   
-#                                                                       
-# copy the stack frame                                                  
-        subql   #1,d0                                                   
-copyUserLoop:                                                               
-        movew   a1@-,sp@-                                               
-        dbf     d0,copyUserLoop                                             
-");                                                                     
-        RESTORE_FP_REGS()                                              
-   asm("   moveml  _registers,d0-d7/a0-a6");                           
-   asm("   rte");  /* pop and go! */                                    
-
-#define DISABLE_INTERRUPTS()   asm("         oriw   #0x0700,sr");
-#define BREAKPOINT() asm("   trap #1");
-
-/* this function is called immediately when a level 7 interrupt occurs */
-/* if the previous interrupt level was 7 then we're already servicing  */
-/* this interrupt and an rte is in order to return to the debugger.    */
-/* For the 68000, the offset for sr is 6 due to the jsr return address */
-asm("
-.text
-.globl __debug_level7
-__debug_level7:
-       movew   d0,sp@-");
-#ifdef mc68020
-asm("  movew   sp@(2),d0");
-#else
-asm("  movew   sp@(6),d0");
-#endif
-asm("  andiw   #0x700,d0
-       cmpiw   #0x700,d0
-       beq     _already7
-        movew   sp@+,d0        
-        bra     __catchException
-_already7:
-       movew   sp@+,d0");
-#ifndef mc68020
-asm("  lea     sp@(4),sp");     /* pull off 68000 return address */
-#endif
-asm("  rte");
-
-extern void _catchException();
-
-#ifdef mc68020
-/* This function is called when a 68020 exception occurs.  It saves
- * all the cpu and fpcp regs in the _registers array, creates a frame on a
- * linked list of frames which has the cpu and fpcp stack frames needed
- * to properly restore the context of these processors, and invokes
- * an exception handler (remcom_handler).
- *
- * stack on entry:                       stack on exit:
- *   N bytes of junk                     exception # MSWord
- *   Exception Format Word               exception # MSWord
- *   Program counter LSWord              
- *   Program counter MSWord             
- *   Status Register                    
- *                                       
- *                                       
- */
-asm(" 
-.text
-.globl __catchException
-__catchException:");
-DISABLE_INTERRUPTS();
-asm("
-        moveml  d0-d7/a0-a6,_registers /* save registers        */
-       movel   _lastFrame,a0   /* last frame pointer */
-");
-SAVE_FP_REGS();        
-asm("
-       lea     _registers,a5   /* get address of registers     */
-        movew   sp@,d1          /* get status register          */
-        movew   d1,a5@(66)      /* save sr                     */      
-       movel   sp@(2),a4       /* save pc in a4 for later use  */
-        movel   a4,a5@(68)      /* save pc in _regisers[]              */
-
-#
-# figure out how many bytes in the stack frame
-       movew   sp@(6),d0       /* get '020 exception format    */
-        movew   d0,d2           /* make a copy of format word   */
-        andiw   #0xf000,d0      /* mask off format type         */
-        rolw    #5,d0           /* rotate into the low byte *2  */
-        lea     _exceptionSize,a1   
-        addw    d0,a1           /* index into the table         */
-       movew   a1@,d0          /* get number of words in frame */
-        movew   d0,d3           /* save it                      */
-        subw    d0,a0          /* adjust save pointer          */
-        subw    d0,a0          /* adjust save pointer(bytes)   */
-       movel   a0,a1           /* copy save pointer            */
-       subql   #1,d0           /* predecrement loop counter    */
-#
-# copy the frame
-saveFrameLoop:
-       movew   sp@+,a1@+
-       dbf     d0,saveFrameLoop
-#
-# now that the stack has been clenaed,
-# save the a7 in use at time of exception
-        movel   sp,_superStack  /* save supervisor sp           */
-        andiw   #0x2000,d1      /* were we in supervisor mode ? */
-        beq     userMode       
-        movel   a7,a5@(60)      /* save a7                  */
-        bra     a7saveDone
-userMode:  
-       movel   usp,a1          
-        movel   a1,a5@(60)      /* save user stack pointer     */
-a7saveDone:
-
-#
-# save size of frame
-        movew   d3,a0@-
-
-#
-# compute exception number
-       andl    #0xfff,d2       /* mask off vector offset       */
-       lsrw    #2,d2           /* divide by 4 to get vect num  */
-        movel   d2,a0@-         /* save it                      */
-#
-# save pc causing exception
-        movel   a4,a0@-
-#
-# save old frame link and set the new value
-       movel   _lastFrame,a1   /* last frame pointer */
-       movel   a1,a0@-         /* save pointer to prev frame   */
-        movel   a0,_lastFrame
-
-        movel   d2,sp@-                /* push exception num           */
-       movel   _exceptionHook,a0  /* get address of handler */
-        jbsr    a0@             /* and call it */
-        jmp     __returnFromException     /* now, return        */
-");
-#else /* mc68000 */
-/* This function is called when an exception occurs.  It translates the
- * return address found on the stack into an exception vector # which
- * is then handled by either handle_exception or a system handler.
- * _catchException provides a front end for both.  
- *
- * stack on entry:                       stack on exit:
- *   Program counter MSWord              exception # MSWord 
- *   Program counter LSWord              exception # MSWord
- *   Status Register                     
- *   Return Address  MSWord              
- *   Return Address  LSWord             
- */
-asm("
-.text
-.globl __catchException
-__catchException:");
-DISABLE_INTERRUPTS();
-asm("
-        moveml d0-d7/a0-a6,_registers  /* save registers               */
-       movel   _lastFrame,a0   /* last frame pointer */
-");
-SAVE_FP_REGS();        
-asm("
-        lea     _registers,a5   /* get address of registers     */
-        movel   sp@+,d2         /* pop return address           */
-       addl    #1530,d2        /* convert return addr to       */
-       divs    #6,d2           /*  exception number            */
-       extl    d2   
-
-        moveql  #3,d3           /* assume a three word frame     */
-
-        cmpiw   #3,d2           /* bus error or address error ? */
-        bgt     normal          /* if >3 then normal error      */
-        movel   sp@+,a0@-       /* copy error info to frame buff*/
-        movel   sp@+,a0@-       /* these are never used         */
-        moveql  #7,d3           /* this is a 7 word frame       */
-     
-normal:   
-       movew   sp@+,d1         /* pop status register          */
-        movel   sp@+,a4         /* pop program counter          */
-        movew   d1,a5@(66)      /* save sr                     */      
-        movel   a4,a5@(68)      /* save pc in _regisers[]              */
-        movel   a4,a0@-         /* copy pc to frame buffer      */
-       movew   d1,a0@-         /* copy sr to frame buffer      */
-
-        movel   sp,_superStack  /* save supervisor sp          */
-
-        andiw   #0x2000,d1      /* were we in supervisor mode ? */
-        beq     userMode       
-        movel   a7,a5@(60)      /* save a7                  */
-        bra     saveDone             
-userMode:
-        movel   usp,a1         /* save user stack pointer      */
-        movel   a1,a5@(60)      /* save user stack pointer     */
-saveDone:
-
-        movew   d3,a0@-         /* push frame size in words     */
-        movel   d2,a0@-         /* push vector number           */
-        movel   a4,a0@-         /* push exception pc            */
-
-#
-# save old frame link and set the new value
-       movel   _lastFrame,a1   /* last frame pointer */
-       movel   a1,a0@-         /* save pointer to prev frame   */
-        movel   a0,_lastFrame
-
-        movel   d2,sp@-                /* push exception num           */
-       movel   _exceptionHook,a0  /* get address of handler */
-        jbsr    a0@             /* and call it */
-        jmp     __returnFromException     /* now, return        */
-");
-#endif
-
-
-/*
- * remcomHandler is a front end for handle_exception.  It moves the
- * stack pointer into an area reserved for debugger use in case the
- * breakpoint happened in supervisor mode.
- */
-asm("_remcomHandler:");
-asm("           addl    #4,sp");        /* pop off return address     */
-asm("           movel   sp@+,d0");      /* get the exception number   */
-asm("          movel   _stackPtr,sp"); /* move to remcom stack area  */
-asm("          movel   d0,sp@-");      /* push exception onto stack  */
-asm("          jbsr    _handle_exception");    /* this never returns */
-asm("           rts");                  /* return */
-
-void _returnFromException( Frame *frame )
-{
-    /* if no existing frame, dummy one up */
-    if (! frame)
-    {
-        frame = lastFrame -1;
-        frame->frameSize = 4;
-        frame->format = 0;
-        frame->fsaveHeader = 0;
-        frame->previous = lastFrame;
-    }
-
-#ifndef mc68020
-    /* a 68000 cannot use the internal info pushed onto a bus error
-     * or address error frame when doing an RTE so don't put this info
-     * onto the stack or the stack will creep every time this happens.
-     */
-    frame->frameSize=3;
-#endif
-
-    /* throw away any frames in the list after this frame */
-    lastFrame = frame;
-
-    frame->sr = registers[(int) PS];
-    frame->pc = registers[(int) PC];
-
-    if (registers[(int) PS] & 0x2000)
-    { 
-        /* return to supervisor mode... */
-        return_to_super();
-    }
-    else
-    { /* return to user mode */
-        return_to_user();
-    }
-}
-
-int hex(ch)
-char ch;
-{
-  if ((ch >= 'a') && (ch <= 'f')) return (ch-'a'+10);
-  if ((ch >= '0') && (ch <= '9')) return (ch-'0');
-  return (0);
-}
-
-
-/* scan for the sequence $<data>#<checksum>     */
-void getpacket(buffer)
-char * buffer;
-{
-  unsigned char checksum;
-  unsigned char xmitcsum;
-  int  i;
-  int  count;
-  char ch;
-  
-  do {
-    /* wait around for the start character, ignore all other characters */
-    while ((ch = getDebugChar()) != '$'); 
-    checksum = 0;
-    count = 0;
-    
-    /* now, read until a # or end of buffer is found */
-    while (count < BUFMAX) {
-      ch = getDebugChar();
-      if (ch == '#') break;
-      checksum = checksum + ch;
-      buffer[count] = ch;
-      count = count + 1;
-      }
-    buffer[count] = 0;
-
-    if (ch == '#') {
-      xmitcsum = hex(getDebugChar()) << 4;
-      xmitcsum += hex(getDebugChar());
-      if ((remote_debug ) && (checksum != xmitcsum)) {
-        fprintf(stderr,"bad checksum.  My count = 0x%x, sent=0x%x. buf=%s\n",
-                                                    checksum,xmitcsum,buffer);
-      }
-      
-      if (checksum != xmitcsum) putDebugChar('-');  /* failed checksum */ 
-      else {
-        putDebugChar('+');  /* successful transfer */
-        /* if a sequence char is present, reply the sequence ID */
-        if (buffer[2] == ':') {
-           putDebugChar( buffer[0] );
-           putDebugChar( buffer[1] );
-           /* remove sequence chars from buffer */
-           count = strlen(buffer);
-           for (i=3; i <= count; i++) buffer[i-3] = buffer[i];
-        } 
-      } 
-    } 
-  } while (checksum != xmitcsum);
-  
-}
-
-/* send the packet in buffer.  The host get's one chance to read it.  
-   This routine does not wait for a positive acknowledge.  */
-
-
-void putpacket(buffer)
-char * buffer;
-{
-  unsigned char checksum;
-  int  count;
-  char ch;
-  
-  /*  $<packet info>#<checksum>. */
-  do {
-  putDebugChar('$');
-  checksum = 0;
-  count    = 0;
-  
-  while (ch=buffer[count]) {
-    if (! putDebugChar(ch)) return;
-    checksum += ch;
-    count += 1;
-  }
-  
-  putDebugChar('#');
-  putDebugChar(hexchars[checksum >> 4]);
-  putDebugChar(hexchars[checksum % 16]);
-
-  } while (1 == 0);  /* (getDebugChar() != '+'); */
-  
-}
-
-static char  inbuffer[BUFMAX];
-static char  outbuffer[BUFMAX];
-static short error;
-
-
-void debug_error(format, parm)
-char * format;
-char * parm;
-{
-  if (remote_debug) fprintf(stderr,format,parm);
-}
-
-/* convert the memory pointed to by mem into hex, placing result in buf */
-/* return a pointer to the last char put in buf (null) */
-char* mem2hex(mem, buf, count)
-char* mem;
-char* buf;
-int   count;
-{
-      int i;
-      unsigned char ch;
-      for (i=0;i<count;i++) {
-          ch = *mem++;
-          *buf++ = hexchars[ch >> 4];
-          *buf++ = hexchars[ch % 16];
-      }
-      *buf = 0; 
-      return(buf);
-}
-
-/* convert the hex array pointed to by buf into binary to be placed in mem */
-/* return a pointer to the character AFTER the last byte written */
-char* hex2mem(buf, mem, count)
-char* buf;
-char* mem;
-int   count;
-{
-      int i;
-      unsigned char ch;
-      for (i=0;i<count;i++) {
-          ch = hex(*buf++) << 4;
-          ch = ch + hex(*buf++);
-          *mem++ = ch;
-      }
-      return(mem);
-}
-
-/* a bus error has occurred, perform a longjmp
-   to return execution and allow handling of the error */
-
-void handle_buserror()
-{
-  longjmp(env,1);
-}
-
-/* this function takes the 68000 exception number and attempts to 
-   translate this number into a unix compatible signal value */
-int computeSignal( exceptionVector )
-int exceptionVector;
-{
-  int sigval;
-  switch (exceptionVector) {
-    case 2 : sigval = 10; break; /* bus error           */
-    case 3 : sigval = 10; break; /* address error       */
-    case 4 : sigval = 4;  break; /* illegal instruction */
-    case 5 : sigval = 8;  break; /* zero divide         */
-    case 6 : sigval = 16; break; /* chk instruction     */
-    case 7 : sigval = 16; break; /* trapv instruction   */
-    case 8 : sigval = 11; break; /* privilege violation */
-    case 9 : sigval = 5;  break; /* trace trap          */
-    case 10: sigval = 4;  break; /* line 1010 emulator  */
-    case 11: sigval = 4;  break; /* line 1111 emulator  */
-    case 31: sigval = 2;  break; /* interrupt           */
-    case 33: sigval = 5;  break; /* breakpoint          */
-    case 40: sigval = 8;  break; /* floating point err  */
-    case 48: sigval = 8;  break; /* floating point err  */
-    case 49: sigval = 8;  break; /* floating point err  */
-    case 50: sigval = 8;  break; /* zero divide         */
-    case 51: sigval = 8;  break; /* underflow           */
-    case 52: sigval = 8;  break; /* operand error       */
-    case 53: sigval = 8;  break; /* overflow            */
-    case 54: sigval = 8;  break; /* NAN                 */
-    default: 
-      sigval = 7;         /* "software generated"*/
-  }
-  return (sigval);
-}
-
-/*
- * This function does all command procesing for interfacing to gdb.
- */
-void handle_exception(int exceptionVector)
-{
-  int    sigval;
-  int    addr, length;
-  char * ptr;
-  int    newPC;
-  Frame  *frame;
-  
-  if (remote_debug) printf("vector=%d, sr=0x%x, pc=0x%x\n", 
-                           exceptionVector,
-                           registers[ PS ], 
-                           registers[ PC ]);
-
-  /* reply to host that an exception has occurred */
-  sigval = computeSignal( exceptionVector );
-  sprintf(outbuffer,"S%02x",sigval);
-  putpacket(outbuffer); 
-
-  while (1==1) { 
-    error = 0;
-    outbuffer[0] = 0;
-    getpacket(inbuffer);
-    switch (inbuffer[0]) {
-      case '?' : sprintf(outbuffer,"S%02x",sigval);
-                 break; 
-      case 'd' : remote_debug = !(remote_debug);  /* toggle debug flag */
-                 break; 
-      case 'g' : /* return the value of the CPU registers */
-                mem2hex((char*) registers, outbuffer, NUMREGBYTES);
-                break;
-      case 'G' : /* set the value of the CPU registers - return OK */
-                hex2mem(&inbuffer[1], (char*) registers, NUMREGBYTES);
-                strcpy(outbuffer,"OK");
-                break;
-      
-      /* mAA..AA,LLLL  Read LLLL bytes at address AA..AA */
-      case 'm' : 
-               if (setjmp(env) == 0) {
-                   exceptionHandler(2,handle_buserror); 
-
-                   if (2 == sscanf(&inbuffer[1],"%x,%x",&addr,&length)) {
-                     mem2hex((char*) addr, outbuffer, length);
-                   }
-                   else {
-                     strcpy(outbuffer,"E01");
-                     debug_error("malformed read memory command: %s",inbuffer);
-                     }     
-                } 
-               else {
-                 exceptionHandler(2,_catchException);   
-                 strcpy(outbuffer,"E03");
-                 debug_error("bus error");
-                 }     
-                
-               /* restore handler for bus error */
-               exceptionHandler(2,_catchException);   
-               break;
-      
-      /* MAA..AA,LLLL: Write LLLL bytes at address AA.AA return OK */
-      case 'M' : 
-               if (setjmp(env) == 0) {
-                   exceptionHandler(2,handle_buserror); 
-
-                   if (2 == sscanf(&inbuffer[1],"%x,%x:",&addr,&length)) {
-                     ptr = strchr(inbuffer,':');
-                     ptr += 1; /* point 1 past the colon */
-                     hex2mem(ptr, (char*) addr, length);
-                     strcpy(outbuffer,"OK");
-                   }
-                   else {
-                     strcpy(outbuffer,"E02");
-                     debug_error("malformed write memory command: %s",inbuffer);
-                     }     
-                } 
-               else {
-                 exceptionHandler(2,_catchException);   
-                 strcpy(outbuffer,"E03");
-                 debug_error("bus error");
-                 }     
-                break;
-     
-     /* cAA..AA    Continue at address AA..AA(optional) */
-     /* sAA..AA   Step one instruction from AA..AA(optional) */
-     case 'c' : 
-     case 's' : 
-          /* try to read optional parameter, addr unchanged if no parm */
-          if (1 == sscanf(&inbuffer[1],"%x",&registers[ PC ])); 
-          newPC = registers[ PC];
-          
-          /* clear the trace bit */
-          registers[ PS ] &= 0x7fff;
-          
-          /* set the trace bit if we're stepping */
-          if (inbuffer[0] == 's') registers[ PS ] |= 0x8000;
-          
-          /*
-           * look for newPC in the linked list of exception frames.
-           * if it is found, use the old frame it.  otherwise,
-           * fake up a dummy frame in returnFromException().
-           */
-          if (remote_debug) printf("new pc = 0x%x\n",newPC);
-          frame = lastFrame;
-          while (frame)
-          {
-              if (remote_debug)
-                  printf("frame at 0x%x has pc=0x%x, except#=%d\n",
-                         frame,frame->exceptionPC,
-                         frame->exceptionVector);
-              if (frame->exceptionPC == newPC) break;  /* bingo! a match */
-              /*
-               * for a breakpoint instruction, the saved pc may
-               * be off by two due to re-executing the instruction
-               * replaced by the trap instruction.  Check for this.
-               */
-              if ((frame->exceptionVector == 33) &&
-                  (frame->exceptionPC == (newPC+2))) break;
-              frame = frame->previous;
-          }
-          
-          /*
-           * If we found a match for the PC AND we are not returning
-           * as a result of a breakpoint (33),
-           * trace exception (9), nmi (31), jmp to
-           * the old exception handler as if this code never ran.
-           */
-          if (frame) 
-          {
-              if ((frame->exceptionVector != 9)  && 
-                  (frame->exceptionVector != 31) && 
-                  (frame->exceptionVector != 33))
-              { 
-                  /*
-                   * invoke the previous handler.
-                   */
-                  if (oldExceptionHook)
-                      (*oldExceptionHook) (frame->exceptionVector);
-                  newPC = registers[ PC ];    /* pc may have changed  */
-                  if (newPC != frame->exceptionPC)
-                  {
-                      if (remote_debug)
-                          printf("frame at 0x%x has pc=0x%x, except#=%d\n",
-                                 frame,frame->exceptionPC,
-                                 frame->exceptionVector);
-                      /* dispose of this frame, we're skipping it (longjump?)*/
-                      lastFrame = frame->previous;
-                      frame = (Frame *) 0;
-                  }
-              }
-          }         
-
-          _returnFromException( frame );
-
-          break;
-          
-      /* kill the program */
-      case 'k' :  /* do nothing */
-                break;
-      } /* switch */ 
-    
-    /* reply to the request */
-    putpacket(outbuffer); 
-    }
-}
-
-
-/* this function is used to set up exception handlers for tracing and 
-   breakpoints */
-void set_debug_traps()
-{
-extern void _debug_level7();
-extern void remcomHandler();
-int exception;
-
-  for (exception = 2; exception <= 23; exception++)
-      exceptionHandler(exception,_catchException);   
-
-  /* level 7 interrupt              */
-  exceptionHandler(31,_debug_level7);    
-  
-  /* breakpoint exception (trap #1) */
-  exceptionHandler(33,_catchException);
-  
-  /* floating point error (trap #8) */
-  exceptionHandler(40,_catchException);
-  
-  /* 48 to 54 are floating point coprocessor errors */
-  for (exception = 48; exception <= 54; exception++)
-      exceptionHandler(exception,_catchException);   
-
-  if (oldExceptionHook != remcomHandler)
-  {
-      oldExceptionHook = exceptionHook;
-      exceptionHook    = remcomHandler;
-  }
-  
-  initialized = 1;
-
-  lastFrame = (Frame *) &frameStack[FRAMESIZE-1];
-  lastFrame->previous = (Frame *) 0;
-}
-
-/* This function will generate a breakpoint exception.  It is used at the
-   beginning of a program to sync up with a debugger and can be used
-   otherwise as a quick means to stop program execution and "break" into
-   the debugger. */
-   
-void breakpoint()
-{
-  if (initialized) BREAKPOINT();
-}
-
-@EOF
-
-chmod 444 remcom.c
-
-exit 0
-
diff --git a/gdb/remote-multi.shar b/gdb/remote-multi.shar
deleted file mode 100755 (executable)
index 86c9cf0..0000000
+++ /dev/null
@@ -1,1313 +0,0 @@
-#!/bin/sh
-#      This is a shell archive.
-#      Run the file through sh to extract its contents.
-# shar:        Shell Archiver
-#      Run the following text with /bin/sh to create:
-#      Remote_Makefile
-#      remote_gutils.c
-#      remote_inflow.c
-#      remote_server.c
-#      remote_utils.c
-# This archive created: Fri Jun 23 17:06:55 1989
-cat << \SHAR_EOF > Remote_Makefile
-#    Makefile for the remote server for GDB, the GNU debugger.
-#    Copyright (C) 1986, 1989 Free Software Foundation, Inc.
-# 
-# This file is part of GDB.
-# 
-# GDB is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 1, or (at your option)
-# any later version.
-# 
-# GDB is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-# 
-# You should have received a copy of the GNU General Public License
-# along with GDB; see the file COPYING.  If not, write to
-# the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-CFLAGS = -g 
-CC = cc
-
-SERVER = remote_server.o\
-                remote_inflow.o\
-                remote_utils.o\
-                remote_gutils.o 
-
-prog : $(SERVER)
-       $(CC) -g -o serve $(SERVER) 
-SHAR_EOF
-cat << \SHAR_EOF > remote_gutils.c
-/* General utility routines for the remote server for GDB, the GNU debugger.
-   Copyright (C) 1986, 1989 Free Software Foundation, Inc.
-
-This file is part of GDB.
-
-GDB is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 1, or (at your option)
-any later version.
-
-GDB is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with GDB; see the file COPYING.  If not, write to
-the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-#include <stdio.h>
-#include <sys/ioctl.h>
-#include "defs.h"
-
-void error ();
-void fatal ();
-
-/* Chain of cleanup actions established with make_cleanup,
-   to be executed if an error happens.  */
-
-static struct cleanup *cleanup_chain;
-
-/* Nonzero means a quit has been requested.  */
-
-int quit_flag;
-
-/* Nonzero means quit immediately if Control-C is typed now,
-   rather than waiting until QUIT is executed.  */
-
-int immediate_quit;
-\f
-/* Add a new cleanup to the cleanup_chain,
-   and return the previous chain pointer
-   to be passed later to do_cleanups or discard_cleanups.
-   Args are FUNCTION to clean up with, and ARG to pass to it.  */
-
-struct cleanup *
-make_cleanup (function, arg)
-     void (*function) ();
-     int arg;
-{
-  register struct cleanup *new
-    = (struct cleanup *) xmalloc (sizeof (struct cleanup));
-  register struct cleanup *old_chain = cleanup_chain;
-
-  new->next = cleanup_chain;
-  new->function = function;
-  new->arg = arg;
-  cleanup_chain = new;
-
-  return old_chain;
-}
-
-/* Discard cleanups and do the actions they describe
-   until we get back to the point OLD_CHAIN in the cleanup_chain.  */
-
-void
-do_cleanups (old_chain)
-     register struct cleanup *old_chain;
-{
-  register struct cleanup *ptr;
-  while ((ptr = cleanup_chain) != old_chain)
-    {
-      (*ptr->function) (ptr->arg);
-      cleanup_chain = ptr->next;
-      free (ptr);
-    }
-}
-
-/* Discard cleanups, not doing the actions they describe,
-   until we get back to the point OLD_CHAIN in the cleanup_chain.  */
-
-void
-discard_cleanups (old_chain)
-     register struct cleanup *old_chain;
-{
-  register struct cleanup *ptr;
-  while ((ptr = cleanup_chain) != old_chain)
-    {
-      cleanup_chain = ptr->next;
-      free (ptr);
-    }
-}
-
-/* This function is useful for cleanups.
-   Do
-
-     foo = xmalloc (...);
-     old_chain = make_cleanup (free_current_contents, &foo);
-
-   to arrange to free the object thus allocated.  */
-
-void
-free_current_contents (location)
-     char **location;
-{
-  free (*location);
-}
-\f
-/* Generally useful subroutines used throughout the program.  */
-
-/* Like malloc but get error if no storage available.  */
-
-char *
-xmalloc (size)
-     long size;
-{
-  register char *val = (char *) malloc (size);
-  if (!val)
-    fatal ("virtual memory exhausted.", 0);
-  return val;
-}
-
-/* Like realloc but get error if no storage available.  */
-
-char *
-xrealloc (ptr, size)
-     char *ptr;
-     long size;
-{
-  register char *val = (char *) realloc (ptr, size);
-  if (!val)
-    fatal ("virtual memory exhausted.", 0);
-  return val;
-}
-
-/* Print the system error message for errno, and also mention STRING
-   as the file name for which the error was encountered.
-   Then return to command level.  */
-
-void
-perror_with_name (string)
-     char *string;
-{
-  extern int sys_nerr;
-  extern char *sys_errlist[];
-  extern int errno;
-  char *err;
-  char *combined;
-
-  if (errno < sys_nerr)
-    err = sys_errlist[errno];
-  else
-    err = "unknown error";
-
-  combined = (char *) alloca (strlen (err) + strlen (string) + 3);
-  strcpy (combined, string);
-  strcat (combined, ": ");
-  strcat (combined, err);
-
-  error ("%s.", combined);
-}
-
-/* Print the system error message for ERRCODE, and also mention STRING
-   as the file name for which the error was encountered.  */
-
-void
-print_sys_errmsg (string, errcode)
-     char *string;
-     int errcode;
-{
-  extern int sys_nerr;
-  extern char *sys_errlist[];
-  char *err;
-  char *combined;
-
-  if (errcode < sys_nerr)
-    err = sys_errlist[errcode];
-  else
-    err = "unknown error";
-
-  combined = (char *) alloca (strlen (err) + strlen (string) + 3);
-  strcpy (combined, string);
-  strcat (combined, ": ");
-  strcat (combined, err);
-
-  printf ("%s.\n", combined);
-}
-
-void
-quit ()
-{
-  fflush (stdout);
-  ioctl (fileno (stdout), TIOCFLUSH, 0);
-  error ("Quit");
-}
-
-/* Control C comes here */
-
-void
-request_quit ()
-{
-  quit_flag = 1;
-  if (immediate_quit)
-    quit ();
-}
-
-/* Print an error message and return to command level.
-   STRING is the error message, used as a fprintf string,
-   and ARG is passed as an argument to it.  */
-
-void
-error (string, arg1, arg2, arg3)
-     char *string;
-     int arg1, arg2, arg3;
-{
-  fflush (stdout);
-  fprintf (stderr, string, arg1, arg2, arg3);
-  fprintf (stderr, "\n");
-  /************return_to_top_level ();************/ 
-}
-
-/* Print an error message and exit reporting failure.
-   This is for a error that we cannot continue from.
-   STRING and ARG are passed to fprintf.  */
-
-void
-fatal (string, arg)
-     char *string;
-     int arg;
-{
-  fprintf (stderr, "gdb: ");
-  fprintf (stderr, string, arg);
-  fprintf (stderr, "\n");
-  exit (1);
-}
-
-/* Make a copy of the string at PTR with SIZE characters
-   (and add a null character at the end in the copy).
-   Uses malloc to get the space.  Returns the address of the copy.  */
-
-char *
-savestring (ptr, size)
-     char *ptr;
-     int size;
-{
-  register char *p = (char *) xmalloc (size + 1);
-  bcopy (ptr, p, size);
-  p[size] = 0;
-  return p;
-}
-
-char *
-concat (s1, s2, s3)
-     char *s1, *s2, *s3;
-{
-  register int len = strlen (s1) + strlen (s2) + strlen (s3) + 1;
-  register char *val = (char *) xmalloc (len);
-  strcpy (val, s1);
-  strcat (val, s2);
-  strcat (val, s3);
-  return val;
-}
-
-void
-print_spaces (n, file)
-     register int n;
-     register FILE *file;
-{
-  while (n-- > 0)
-    fputc (' ', file);
-}
-
-/* Ask user a y-or-n question and return 1 iff answer is yes.
-   Takes three args which are given to printf to print the question.
-   The first, a control string, should end in "? ".
-   It should not say how to answer, because we do that.  */
-
-int
-query (ctlstr, arg1, arg2)
-     char *ctlstr;
-{
-  register int answer;
-
-  /* Automatically answer "yes" if input is not from a terminal.  */
-  /***********if (!input_from_terminal_p ())
-    return 1; *************************/ 
-
-  while (1)
-    {
-      printf (ctlstr, arg1, arg2);
-      printf ("(y or n) ");
-      fflush (stdout);
-      answer = fgetc (stdin);
-      clearerr (stdin);                /* in case of C-d */
-      if (answer != '\n')
-       while (fgetc (stdin) != '\n') clearerr (stdin);
-      if (answer >= 'a')
-       answer -= 040;
-      if (answer == 'Y')
-       return 1;
-      if (answer == 'N')
-       return 0;
-      printf ("Please answer y or n.\n");
-    }
-}
-\f
-/* Parse a C escape sequence.  STRING_PTR points to a variable
-   containing a pointer to the string to parse.  That pointer
-   is updated past the characters we use.  The value of the
-   escape sequence is returned.
-
-   A negative value means the sequence \ newline was seen,
-   which is supposed to be equivalent to nothing at all.
-
-   If \ is followed by a null character, we return a negative
-   value and leave the string pointer pointing at the null character.
-
-   If \ is followed by 000, we return 0 and leave the string pointer
-   after the zeros.  A value of 0 does not mean end of string.  */
-
-int
-parse_escape (string_ptr)
-     char **string_ptr;
-{
-  register int c = *(*string_ptr)++;
-  switch (c)
-    {
-    case 'a':
-      return '\a';
-    case 'b':
-      return '\b';
-    case 'e':
-      return 033;
-    case 'f':
-      return '\f';
-    case 'n':
-      return '\n';
-    case 'r':
-      return '\r';
-    case 't':
-      return '\t';
-    case 'v':
-      return '\v';
-    case '\n':
-      return -2;
-    case 0:
-      (*string_ptr)--;
-      return 0;
-    case '^':
-      c = *(*string_ptr)++;
-      if (c == '\\')
-       c = parse_escape (string_ptr);
-      if (c == '?')
-       return 0177;
-      return (c & 0200) | (c & 037);
-      
-    case '0':
-    case '1':
-    case '2':
-    case '3':
-    case '4':
-    case '5':
-    case '6':
-    case '7':
-      {
-       register int i = c - '0';
-       register int count = 0;
-       while (++count < 3)
-         {
-           if ((c = *(*string_ptr)++) >= '0' && c <= '7')
-             {
-               i *= 8;
-               i += c - '0';
-             }
-           else
-             {
-               (*string_ptr)--;
-               break;
-             }
-         }
-       return i;
-      }
-    default:
-      return c;
-    }
-}
-\f
-void
-printchar (ch, stream)
-     unsigned char ch;
-     FILE *stream;
-{
-  register int c = ch;
-  if (c < 040 || c >= 0177)
-    {
-      if (c == '\n')
-       fprintf (stream, "\\n");
-      else if (c == '\b')
-       fprintf (stream, "\\b");
-      else if (c == '\t')
-       fprintf (stream, "\\t");
-      else if (c == '\f')
-       fprintf (stream, "\\f");
-      else if (c == '\r')
-       fprintf (stream, "\\r");
-      else if (c == 033)
-       fprintf (stream, "\\e");
-      else if (c == '\a')
-       fprintf (stream, "\\a");
-      else
-       fprintf (stream, "\\%03o", c);
-    }
-  else
-    {
-      if (c == '\\' || c == '"' || c == '\'')
-       fputc ('\\', stream);
-      fputc (c, stream);
-    }
-}
-SHAR_EOF
-cat << \SHAR_EOF > remote_inflow.c
-/* Low level interface to ptrace, for GDB when running under Unix.
-   Copyright (C) 1986, 1987 Free Software Foundation, Inc.
-*/
-
-#include "defs.h"
-#include "param.h"
-#include "wait.h"
-#include "frame.h"
-#include "inferior.h"
-/***************************
-#include "initialize.h"
-****************************/ 
-
-#include <stdio.h>
-#include <sys/param.h>
-#include <sys/dir.h>
-#include <sys/user.h>
-#include <signal.h>
-#include <sys/ioctl.h>
-#include <sgtty.h>
-#include <fcntl.h>
-
-/***************Begin MY defs*********************/ 
-int quit_flag = 0; 
-char registers[REGISTER_BYTES]; 
-
-/* Index within `registers' of the first byte of the space for
-   register N.  */
-
-
-char buf2[MAX_REGISTER_RAW_SIZE];
-/***************End MY defs*********************/ 
-
-#ifdef NEW_SUN_PTRACE
-#include <sys/ptrace.h>
-#include <machine/reg.h>
-#endif
-
-extern char **environ; 
-extern int errno;
-extern int inferior_pid; 
-void error(), quit(), perror_with_name();
-int query(); 
-void supply_register(), write_register(); 
-CORE_ADDR read_register(); 
-
-/* Nonzero if we are debugging an attached outside process
-   rather than an inferior.  */
-
-
-/* Start an inferior process and returns its pid.
-   ALLARGS is a vector of program-name and args.
-   ENV is the environment vector to pass.  */
-
-int
-create_inferior (allargs, env)
-     char **allargs;
-     char **env;
-{
-  int pid;
-  extern int sys_nerr;
-  extern char *sys_errlist[];
-  extern int errno;
-
-  /* exec is said to fail if the executable is open.  */
-  /****************close_exec_file ();*****************/ 
-
-  pid = vfork ();
-  if (pid < 0)
-    perror_with_name ("vfork");
-
-  if (pid == 0)
-    {
-      /* Run inferior in a separate process group.  */
-      setpgrp (getpid (), getpid ());
-
-/* Not needed on Sun, at least, and loses there
-   because it clobbers the superior.  */
-/*???      signal (SIGQUIT, SIG_DFL);
-      signal (SIGINT, SIG_DFL);  */
-
-         errno = 0; 
-      ptrace (0);
-
-      execle ("/bin/sh", "sh", "-c", allargs, 0, env);
-
-      fprintf (stderr, "Cannot exec /bin/sh: %s.\n",
-              errno < sys_nerr ? sys_errlist[errno] : "unknown error");
-      fflush (stderr);
-      _exit (0177);
-    }
-  return pid;
-}
-
-/* Kill the inferior process.  Make us have no inferior.  */
-
-kill_inferior ()
-{
-  if (inferior_pid == 0)
-    return;
-  ptrace (8, inferior_pid, 0, 0);
-  wait (0);
-  /*************inferior_died ();****VK**************/ 
-}
-
-/* Resume execution of the inferior process.
-   If STEP is nonzero, single-step it.
-   If SIGNAL is nonzero, give it that signal.  */
-
-unsigned char
-resume (step, signal,status)
-     int step;
-     int signal;
-        char *status; 
-{
-       int pid ; 
-       WAITTYPE w; 
-
-       errno = 0;
-    ptrace (step ? 9 : 7, inferior_pid, 1, signal);
-    if (errno)
-               perror_with_name ("ptrace");
-       pid = wait(&w); 
-       if(pid != inferior_pid) 
-               perror_with_name ("wait"); 
-
-       if(WIFEXITED(w))
-       {
-               printf("\nchild exited with retcode = %x \n",WRETCODE(w)); 
-               *status = 'E'; 
-               return((unsigned char) WRETCODE(w));
-       } 
-       else if(!WIFSTOPPED(w))
-       {
-               printf("\nchild did terminated with signal = %x \n",WTERMSIG(w)); 
-               *status = 'T'; 
-               return((unsigned char) WTERMSIG(w)); 
-       } 
-       else 
-       {
-               printf("\nchild stopped with signal = %x \n",WSTOPSIG(w)); 
-               *status = 'S'; 
-               return((unsigned char) WSTOPSIG(w)); 
-       } 
-                
-}
-
-
-#ifdef NEW_SUN_PTRACE
-
-void
-fetch_inferior_registers ()
-{
-  struct regs inferior_registers;
-  struct fp_status inferior_fp_registers;
-  extern char registers[];
-
-      ptrace (PTRACE_GETREGS, inferior_pid, &inferior_registers);
-      if (errno)
-               perror_with_name ("ptrace");
-         /**********debugging begin **********/ 
-         print_some_registers(&inferior_registers); 
-         /**********debugging end **********/ 
-      ptrace (PTRACE_GETFPREGS, inferior_pid, &inferior_fp_registers);
-      if (errno)
-               perror_with_name ("ptrace");
-
-      bcopy (&inferior_registers, registers, 16 * 4);
-      bcopy (&inferior_fp_registers, &registers[REGISTER_BYTE (FP0_REGNUM)],
-            sizeof inferior_fp_registers.fps_regs);
-      *(int *)&registers[REGISTER_BYTE (PS_REGNUM)] = inferior_registers.r_ps;
-      *(int *)&registers[REGISTER_BYTE (PC_REGNUM)] = inferior_registers.r_pc;
-      bcopy (&inferior_fp_registers.fps_control,
-            &registers[REGISTER_BYTE (FPC_REGNUM)],
-            sizeof inferior_fp_registers - sizeof inferior_fp_registers.fps_regs);
-}
-
-/* Store our register values back into the inferior.
-   If REGNO is -1, do this for all registers.
-   Otherwise, REGNO specifies which register (so we can save time).  */
-
-store_inferior_registers (regno)
-     int regno;
-{
-  struct regs inferior_registers;
-  struct fp_status inferior_fp_registers;
-  extern char registers[];
-
-      bcopy (registers, &inferior_registers, 16 * 4);
-      bcopy (&registers[REGISTER_BYTE (FP0_REGNUM)], &inferior_fp_registers,
-            sizeof inferior_fp_registers.fps_regs);
-      inferior_registers.r_ps = *(int *)&registers[REGISTER_BYTE (PS_REGNUM)];
-      inferior_registers.r_pc = *(int *)&registers[REGISTER_BYTE (PC_REGNUM)];
-      bcopy (&registers[REGISTER_BYTE (FPC_REGNUM)],
-            &inferior_fp_registers.fps_control,
-            sizeof inferior_fp_registers - sizeof inferior_fp_registers.fps_regs);
-
-      ptrace (PTRACE_SETREGS, inferior_pid, &inferior_registers);
-      if (errno)
-               perror_with_name ("ptrace");
-      ptrace (PTRACE_SETFPREGS, inferior_pid, &inferior_fp_registers);
-      if (errno)
-               perror_with_name ("ptrace");
-}
-
-#endif /* not NEW_SUN_PTRACE */
-
-
-/* NOTE! I tried using PTRACE_READDATA, etc., to read and write memory
-   in the NEW_SUN_PTRACE case.
-   It ought to be straightforward.  But it appears that writing did
-   not write the data that I specified.  I cannot understand where
-   it got the data that it actually did write.  */
-
-/* Copy LEN bytes from inferior's memory starting at MEMADDR
-   to debugger memory starting at MYADDR.  */
-
-read_inferior_memory (memaddr, myaddr, len)
-     CORE_ADDR memaddr;
-     char *myaddr;
-     int len;
-{
-  register int i;
-  /* Round starting address down to longword boundary.  */
-  register CORE_ADDR addr = memaddr & - sizeof (int);
-  /* Round ending address up; get number of longwords that makes.  */
-  register int count
-    = (((memaddr + len) - addr) + sizeof (int) - 1) / sizeof (int);
-  /* Allocate buffer of that many longwords.  */
-  register int *buffer = (int *) alloca (count * sizeof (int));
-
-  /* Read all the longwords */
-  for (i = 0; i < count; i++, addr += sizeof (int))
-    {
-       buffer[i] = ptrace (1, inferior_pid, addr, 0);
-    }
-
-  /* Copy appropriate bytes out of the buffer.  */
-  bcopy ((char *) buffer + (memaddr & (sizeof (int) - 1)), myaddr, len);
-}
-
-/* Copy LEN bytes of data from debugger memory at MYADDR
-   to inferior's memory at MEMADDR.
-   On failure (cannot write the inferior)
-   returns the value of errno.  */
-
-int
-write_inferior_memory (memaddr, myaddr, len)
-     CORE_ADDR memaddr;
-     char *myaddr;
-     int len;
-{
-  register int i;
-  /* Round starting address down to longword boundary.  */
-  register CORE_ADDR addr = memaddr & - sizeof (int);
-  /* Round ending address up; get number of longwords that makes.  */
-  register int count
-    = (((memaddr + len) - addr) + sizeof (int) - 1) / sizeof (int);
-  /* Allocate buffer of that many longwords.  */
-  register int *buffer = (int *) alloca (count * sizeof (int));
-  extern int errno;
-
-  /* Fill start and end extra bytes of buffer with existing memory data.  */
-
-    buffer[0] = ptrace (1, inferior_pid, addr, 0);
-
-  if (count > 1)
-    {
-       buffer[count - 1]
-         = ptrace (1, inferior_pid,
-                   addr + (count - 1) * sizeof (int), 0);
-    }
-
-  /* Copy data to be written over corresponding part of buffer */
-
-  bcopy (myaddr, (char *) buffer + (memaddr & (sizeof (int) - 1)), len);
-
-  /* Write the entire buffer.  */
-
-  for (i = 0; i < count; i++, addr += sizeof (int))
-    {
-      errno = 0;
-       ptrace (4, inferior_pid, addr, buffer[i]);
-      if (errno)
-       return errno;
-    }
-
-  return 0;
-}
-\f
-void
-try_writing_regs_command ()
-{
-  register int i;
-  register int value;
-  extern int errno;
-
-  if (inferior_pid == 0)
-    error ("There is no inferior process now.");
-
-  fetch_inferior_registers(); 
-  for (i = 0;i<18 ; i ++)
-    {
-      QUIT;
-      errno = 0;
-      value = read_register(i); 
-      write_register ( i, value);
-      if (errno == 0)
-       {
-               printf (" Succeeded with register %d; value 0x%x (%d).\n",
-                 i, value, value);
-       }
-      else 
-               printf (" Failed with register %d.\n", i);
-    }
-}
-
-void
-initialize ()
-{
-
-  inferior_pid = 0;
-
-
-}
-
-
-/* Return the contents of register REGNO,
-   regarding it as an integer.  */
-
-CORE_ADDR
-read_register (regno)
-     int regno;
-{
-  /* This loses when REGISTER_RAW_SIZE (regno) != sizeof (int) */
-  return *(int *) &registers[REGISTER_BYTE (regno)];
-}
-
-/* Store VALUE in the register number REGNO, regarded as an integer.  */
-
-void
-write_register (regno, val)
-     int regno, val;
-{
-  /* This loses when REGISTER_RAW_SIZE (regno) != sizeof (int) */
-  *(int *) &registers[REGISTER_BYTE (regno)] = val;
-
-  if (have_inferior_p ())
-    store_inferior_registers (regno);
-}
-
-
-int
-have_inferior_p ()
-{
-  return inferior_pid != 0;
-}
-
-print_some_registers(regs)
-int regs[];
-{
-   register int i;
-   for (i = 0; i < 18; i++) {
-        printf("reg[%d] = %x\n", i, regs[i]);
-        }
-}
-
-SHAR_EOF
-cat << \SHAR_EOF > remote_server.c
-/* Main code for remote server for GDB, the GNU Debugger.
-   Copyright (C) 1989 Free Software Foundation, Inc.
-
-This file is part of GDB.
-
-GDB is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 1, or (at your option)
-any later version.
-
-GDB is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with GDB; see the file COPYING.  If not, write to
-the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-#include "param.h"
-#include <stdio.h>
-
-void read_inferior_memory(), fetch_inferior_registers(); 
-unsigned char resume(); 
-void kill_inferior(); 
-void initialize(), try_writing_regs_command();  
-int create_inferior(), read_register(); 
-
-extern char registers[]; 
-int inferior_pid; 
-extern char **environ; 
-
-/* Descriptor for I/O to remote machine.  */
-int remote_desc;
-int kiodebug = 0;
-int remote_debugging; 
-
-void remote_send ();
-void putpkt ();
-void getpkt ();
-void remote_open(); 
-void write_ok(); 
-void write_enn(); 
-void convert_ascii_to_int(); 
-void convert_int_to_ascii(); 
-void prepare_resume_reply(); 
-void decode_m_packet(); 
-void decode_M_packet(); 
-
-
-main(argc,argv)
-int argc; char *argv[]; 
-{
-    char ch,status, own_buf[2000], mem_buf[2000]; 
-       int i=0;  
-       unsigned char signal;  
-       unsigned int mem_addr, len; 
-
-       initialize(); 
-    printf("\nwill open serial link\n"); 
-    remote_open("/dev/ttya",0); 
-
-       if(argc < 2) 
-       { 
-               printf("Enter name of program to be run with command line args\n"); 
-               gets(own_buf); 
-               inferior_pid = create_inferior(own_buf,environ); 
-               printf("\nProcess %s created; pid = %d\n",own_buf,inferior_pid);
-       } 
-       else 
-       { 
-               inferior_pid = create_inferior(argv[1],environ); 
-               printf("\nProcess %s created; pid = %d\n",argv[1],inferior_pid);
-       } 
-
-    do {  
-        getpkt(own_buf); 
-        printf("\nPacket received is>:%s\n",own_buf); 
-               i = 0; 
-               ch = own_buf[i++]; 
-           switch (ch) { 
-                       case 'h':       /**********This is only for tweaking the gdb+ program *******/ 
-                                               signal = resume(1,0,&status);
-                                               prepare_resume_reply(own_buf,status,signal); 
-                                               break; 
-                                               /*************end tweak*************************************/ 
-
-                       case 'g':       fetch_inferior_registers();             
-                                               convert_int_to_ascii(registers,own_buf,REGISTER_BYTES); 
-                                               break; 
-                       case 'G':       convert_ascii_to_int(&own_buf[1],registers,REGISTER_BYTES);
-                                               if(store_inferior_registers(-1)==0)  
-                                                       write_ok(own_buf); 
-                                               else  
-                                                       write_enn(own_buf); 
-                                               break; 
-                       case 'm':       decode_m_packet(&own_buf[1],&mem_addr,&len); 
-                                               read_inferior_memory(mem_addr,mem_buf,len);
-                                               convert_int_to_ascii(mem_buf,own_buf,len); 
-                                               break; 
-                       case 'M':       decode_M_packet(&own_buf[1],&mem_addr,&len,mem_buf); 
-                                               if(write_inferior_memory(mem_addr,mem_buf,len)==0)  
-                                                       write_ok(own_buf); 
-                                               else 
-                                                       write_enn(own_buf); 
-                                               break; 
-                       case 'c':       signal = resume(0,0,&status);
-                                               printf("\nSignal received is >: %0x \n",signal); 
-                                               prepare_resume_reply(own_buf,status,signal); 
-                                               break; 
-                       case 's':       signal = resume(1,0,&status);
-                                               prepare_resume_reply(own_buf,status,signal); 
-                                               break; 
-                       case 'k':       kill_inferior();
-                                               sprintf(own_buf,"q"); 
-                                       putpkt(own_buf); 
-                                               printf("\nObtained kill request...terminating\n"); 
-                                       close(remote_desc); 
-                                               exit(0); 
-                       case 't':       try_writing_regs_command();
-                                               own_buf[0] = '\0'; 
-                                               break; 
-                       default :       printf("\nUnknown option chosen by master\n"); 
-                                               write_enn(own_buf); 
-                                               break; 
-                 } 
-
-        putpkt(own_buf); 
-     }  while(1) ; 
-
-    close(remote_desc); 
-    /** now get out of here**/ 
-    printf("\nFinished reading data from serial link - Bye!\n"); 
-    exit(0);
-
-}
-
-SHAR_EOF
-cat << \SHAR_EOF > remote_utils.c
-/* Remote utility routines for the remote server for GDB, the GNU debugger.
-   Copyright (C) 1986, 1989 Free Software Foundation, Inc.
-
-This file is part of GDB.
-
-GDB is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 1, or (at your option)
-any later version.
-
-GDB is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with GDB; see the file COPYING.  If not, write to
-the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-#include "param.h"
-#include <stdio.h>
-#include <signal.h>
-#include <sys/wait.h>
-#include <sys/ioctl.h>
-#include <a.out.h>
-#include <sys/file.h>
-#include <sgtty.h> 
-
-extern int remote_desc; 
-extern int remote_debugging; 
-extern int kiodebug; 
-
-void remote_open(); 
-void remote_send(); 
-void putpkt(); 
-void getpkt(); 
-
-void write_ok(); 
-void write_enn(); 
-void convert_ascii_to_int(); 
-void convert_int_to_ascii(); 
-void prepare_resume_reply(); 
-
-/* Open a connection to a remote debugger.
-   NAME is the filename used for communication.  */
-
-void
-remote_open (name, from_tty)
-     char *name;
-     int from_tty;
-{
-  struct sgttyb sg;
-
-  remote_debugging = 0;
-
-  remote_desc = open (name, O_RDWR);
-  if (remote_desc < 0)
-    printf("\ncould not open remote device\n"); 
-
-  ioctl (remote_desc, TIOCGETP, &sg);
-  sg.sg_flags = RAW;
-  ioctl (remote_desc, TIOCSETP, &sg);
-
-  if (from_tty)
-    printf ("Remote debugging using %s\n", name);
-  remote_debugging = 1;
-}
-
-/* Convert hex digit A to a number.  */
-
-static int
-fromhex (a)
-     int a;
-{
-  if (a >= '0' && a <= '9')
-    return a - '0';
-  else if (a >= 'a' && a <= 'f')
-    return a - 'a' + 10;
-  else
-    perror ("Reply contains invalid hex digit");
-}
-
-/* Convert number NIB to a hex digit.  */
-
-static int
-tohex (nib)
-     int nib;
-{
-  if (nib < 10)
-    return '0'+nib;
-  else
-    return 'a'+nib-10;
-}
-
-/* Send the command in BUF to the remote machine,
-   and read the reply into BUF.
-   Report an error if we get an error reply.  */
-
-void
-remote_send (buf)
-     char *buf;
-{
-  putpkt (buf);
-  getpkt (buf);
-
-  if (buf[0] == 'E')
-    perror ("Remote failure reply: %s", buf);
-}
-
-/* Send a packet to the remote machine, with error checking.
-   The data of the packet is in BUF.  */
-
-void
-putpkt (buf)
-     char *buf;
-{
-  int i;
-  unsigned char csum = 0;
-  char buf2[500];
-  char buf3[1];
-  int cnt = strlen (buf);
-  char *p;
-
-  if (kiodebug)
-    fprintf (stderr, "Sending packet: %s\n", buf);
-
-  /* Copy the packet into buffer BUF2, encapsulating it
-     and giving it a checksum.  */
-
-  p = buf2;
-  *p++ = '$';
-
-  for (i = 0; i < cnt; i++)
-    {
-      csum += buf[i];
-      *p++ = buf[i];
-    }
-  *p++ = '#';
-  *p++ = tohex ((csum >> 4) & 0xf);
-  *p++ = tohex (csum & 0xf);
-
-  /* Send it over and over until we get a positive ack.  */
-
-  do {
-    write (remote_desc, buf2, p - buf2);
-    read (remote_desc, buf3, 1);
-  } while (buf3[0] != '+');
-}
-
-static int
-readchar ()
-{
-  char buf[1];
-  while (read (remote_desc, buf, 1) != 1) ;
-  return buf[0] & 0x7f;
-}
-
-/* Read a packet from the remote machine, with error checking,
-   and store it in BUF.  */
-
-void
-getpkt (buf)
-     char *buf;
-{
-  char *bp;
-  unsigned char csum, c, c1, c2;
-  extern kiodebug;
-
-  while (1)
-    {
-         csum = 0; 
-      while ((c = readchar()) != '$');
-
-      bp = buf;
-      while (1)
-       {
-         c = readchar ();
-         if (c == '#')
-           break;
-         *bp++ = c;
-         csum += c;
-       }
-      *bp = 0;
-
-      c1 = fromhex (readchar ());
-      c2 = fromhex (readchar ());
-      if (csum == (c1 << 4) + c2)
-           break;
-
-      printf ("Bad checksum, sentsum=0x%x, csum=0x%x, buf=%s\n",
-             (c1 << 4) + c2, csum, buf);
-      write (remote_desc, "-", 1);
-    }
-
-  write (remote_desc, "+", 1);
-
-  if (kiodebug)
-    fprintf (stderr,"Packet received :%s\n", buf);
-}
-
-
-void 
-write_ok(buf)
-       char *buf; 
-{
-       buf[0] = 'O';
-       buf[1] = 'k';
-       buf[2] = '\0';
-}
-
-void 
-write_enn(buf)
-       char *buf; 
-{
-       buf[0] = 'E';
-       buf[1] = 'N';
-       buf[2] = 'N';
-       buf[3] = '\0';
-}
-
-void
-convert_int_to_ascii(from,to,n)
-char *from, *to; int n; 
-{
-       int nib ; 
-       char ch; 
-       while( n-- )
-       {
-               ch = *from++;           
-               nib = ((ch & 0xf0) >> 4)& 0x0f; 
-               *to++ = tohex(nib); 
-               nib = ch & 0x0f; 
-               *to++ = tohex(nib); 
-       } 
-       *to++ = 0; 
-}
-
-
-void
-convert_ascii_to_int(from,to,n)
-char *from, *to; int n;  
-{
-       int nib1,nib2 ; 
-       while( n-- )
-       {
-               nib1 = fromhex(*from++); 
-               nib2 = fromhex(*from++); 
-               *to++ = (((nib1 & 0x0f)<< 4)& 0xf0) | (nib2 & 0x0f); 
-       } 
-}
-
-void
-prepare_resume_reply(buf,status,signal)
-char *buf ,status; 
-unsigned char signal; 
-{
-       int nib; 
-       char ch; 
-
-       *buf++ = 'S';  
-       *buf++ = status;  
-       nib = ((signal & 0xf0) >> 4) ; 
-       *buf++ = tohex(nib); 
-       nib = signal & 0x0f; 
-       *buf++ = tohex(nib); 
-       *buf++ = 0; 
-}
-
-void 
-decode_m_packet(from,mem_addr_ptr,len_ptr)
-char *from;
-unsigned int *mem_addr_ptr, *len_ptr; 
-{
-       int i = 0, j = 0 ; 
-       char ch; 
-       *mem_addr_ptr = *len_ptr = 0; 
-       /************debugging begin************/ 
-       printf("\nIn decode_m_packet"); 
-       /************debugging end************/ 
-
-       while((ch = from[i++]) != ',') 
-       { 
-               *mem_addr_ptr = *mem_addr_ptr << 4; 
-               *mem_addr_ptr |= fromhex(ch) & 0x0f; 
-       } 
-       /************debugging begin************/ 
-       printf("\nFinished mem_addr part"); 
-       /************debugging end************/ 
-
-       for(j=0; j < 4; j++) 
-       { 
-               if((ch = from[i++]) == 0)  
-                       break; 
-               *len_ptr = *len_ptr << 4; 
-               *len_ptr |= fromhex(ch) & 0x0f; 
-       } 
-       /************debugging begin************/ 
-       printf("\nFinished len_ptr part"); 
-       /************debugging end************/ 
-}
-
-void 
-decode_M_packet(from,mem_addr_ptr,len_ptr,to)
-char *from, *to;
-unsigned int *mem_addr_ptr, *len_ptr; 
-{
-       int i = 0, j = 0 ; 
-       char ch; 
-       *mem_addr_ptr = *len_ptr = 0; 
-       /************debugging begin************/ 
-       printf("\nIn decode_M_packet"); 
-       /************debugging end************/ 
-
-       while((ch = from[i++]) != ',') 
-       { 
-               *mem_addr_ptr = *mem_addr_ptr << 4; 
-               *mem_addr_ptr |= fromhex(ch) & 0x0f; 
-       } 
-       /************debugging begin************/ 
-       printf("\nFinished mem_addr part: memaddr = %x",*mem_addr_ptr); 
-       /************debugging end************/ 
-
-       while((ch = from[i++]) != ':') 
-       { 
-               *len_ptr = *len_ptr << 4; 
-               *len_ptr |= fromhex(ch) & 0x0f; 
-       } 
-       /************debugging begin************/ 
-       printf("\nFinished len_ptr part: len = %d",*len_ptr); 
-       /************debugging end************/ 
-
-       convert_ascii_to_int(&from[i++],to,*len_ptr); 
-
-       /************debugging begin************/ 
-       printf("\nmembuf : %x",*(int *)to); 
-       /************debugging end************/ 
-}
-
-SHAR_EOF
-#      End of shell archive
-exit 0
diff --git a/gdb/remote-sa.m68k.shar b/gdb/remote-sa.m68k.shar
deleted file mode 100755 (executable)
index aeb76e5..0000000
+++ /dev/null
@@ -1,893 +0,0 @@
-# This is a shell archive.  Remove anything before this line,
-# then unpack it by saving it in a file and typing "sh file".
-#
-# Wrapped by Glenn Engel <glenne@labgre> on Mon Jun 12 15:19:20 1989
-#
-# This archive contains:
-#      remcom.c        
-#
-
-LANG=""; export LANG
-PATH=/bin:/usr/bin:$PATH; export PATH
-
-echo x - remcom.c
-cat >remcom.c <<'@EOF'
-
-/****************************************************************************
-
-               THIS SOFTWARE IS NOT COPYRIGHTED  
-   
-   HP offers the following for use in the public domain.  HP makes no
-   warranty with regard to the software or it's performance and the 
-   user accepts the software "AS IS" with all faults.
-
-   HP DISCLAIMS ANY WARRANTIES, EXPRESS OR IMPLIED, WITH REGARD
-   TO THIS SOFTWARE INCLUDING BUT NOT LIMITED TO THE WARRANTIES
-   OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
-
-****************************************************************************/
-
-/****************************************************************************
- *  $Header$                   
- *
- *  $Module name: remcom.c $  
- *  $Revision$
- *  $Date$
- *  $Contributor:     Lake Stevens Instrument Division$
- *  
- *  $Description:     low level support for gdb debugger. $
- *
- *  $Considerations:  only works on target hardware $
- *
- *  $Written by:      Glenn Engel $
- *  $ModuleState:     Experimental $ 
- *
- *  $NOTES:           See Below $
- * 
- *  To enable debugger support, two things need to happen.  One, a
- *  call to set_debug_traps() is necessary in order to allow any breakpoints
- *  or error conditions to be properly intercepted and reported to gdb.
- *  Two, a breakpoint needs to be generated to begin communication.  This
- *  is most easily accomplished by a call to breakpoint().  Breakpoint()
- *  simulates a breakpoint by executing a trap #1.
- *  
- *  Some explanation is probably necessary to explain how exceptions are
- *  handled.  When an exception is encountered the 68000 pushes the current
- *  program counter and status register onto the supervisor stack and then
- *  transfers execution to a location specified in it's vector table.
- *  The handlers for the exception vectors are hardwired to jmp to an address
- *  given by the relation:  (exception - 256) * 6.  These are decending 
- *  addresses starting from -6, -12, -18, ...  By allowing 6 bytes for
- *  each entry, a jsr, jmp, bsr, ... can be used to enter the exception 
- *  handler.  Using a jsr to handle an exception has an added benefit of
- *  allowing a single handler to service several exceptions and use the
- *  return address as the key differentiation.  The vector number can be
- *  computed from the return address by [ exception = (addr + 1530) / 6 ].
- *  The sole purpose of the routine _catchException is to compute the
- *  exception number and push it on the stack in place of the return address.
- *  The external function exceptionHandler() is
- *  used to attach a specific handler to a specific 68k exception.
- *  For 68020 machines, the ability to have a return address around just
- *  so the vector can be determined is not necessary because the '020 pushes an
- *  extra word onto the stack containing the vector offset
- * 
- *  Because gdb will sometimes write to the stack area to execute function
- *  calls, this program cannot rely on using the supervisor stack so it
- *  uses it's own stack area reserved in the int array remcomStack.  
- * 
- *************
- *
- *    The following gdb commands are supported:
- * 
- * command          function                               Return value
- * 
- *    g             return the value of the CPU registers  hex data or ENN
- *    G             set the value of the CPU registers     OK or ENN
- * 
- *    mAA..AA,LLLL  Read LLLL bytes at address AA..AA      hex data or ENN
- *    MAA..AA,LLLL: Write LLLL bytes at address AA.AA      OK or ENN
- * 
- *    c             Resume at current address              SNN   ( signal NN)
- *    cAA..AA       Continue at address AA..AA             SNN
- * 
- *    s             Step one instruction                   SNN
- *    sAA..AA       Step one instruction from AA..AA       SNN
- * 
- *    k             kill
- *
- *    ?             What was the last sigval ?             SNN   (signal NN)
- * 
- * All commands and responses are sent with a packet which includes a 
- * checksum.  A packet consists of 
- * 
- * $<packet info>#<checksum>.
- * 
- * where
- * <packet info> :: <characters representing the command or response>
- * <checksum>    :: < two hex digits computed as modulo 256 sum of <packetinfo>>
- * 
- * When a packet is received, it is first acknowledged with either '+' or '-'.
- * '+' indicates a successful transfer.  '-' indicates a failed transfer.
- * 
- * Example:
- * 
- * Host:                  Reply:
- * $m0,10#2a               +$00010203040506070809101112131415#42
- * 
- ****************************************************************************/
-
-#include <stdio.h>
-#include <string.h>
-#include <setjmp.h>
-
-/************************************************************************
- *
- * external low-level support routines 
- */
-typedef void (*ExceptionHook)(int);   /* pointer to function with int parm */
-typedef void (*Function)();           /* pointer to a function */
-
-extern putDebugChar();   /* write a single character      */
-extern getDebugChar();   /* read and return a single char */
-
-extern Function exceptionHandler();  /* assign an exception handler */
-extern ExceptionHook exceptionHook;  /* hook variable for errors/exceptions */
-
-
-/************************************************************************/
-/* BUFMAX defines the maximum number of characters in inbound/outbound buffers*/
-/* at least NUMREGBYTES*2 are needed for register packets */
-#define BUFMAX 400
-
-static char initialized;  /* boolean flag. != 0 means we've been initialized */
-
-int     remote_debug = 0;
-/*  debug >  0 prints ill-formed commands in valid packets & checksum errors */ 
-
-char hexchars[]="0123456789abcdef";
-
-/* there are 180 bytes of registers on a 68020 w/68881      */
-/* many of the fpa registers are 12 byte (96 bit) registers */
-#define NUMREGBYTES 180
-enum regnames {D0,D1,D2,D3,D4,D5,D6,D7, 
-               A0,A1,A2,A3,A4,A5,A6,A7, 
-               PS,PC,
-               FP0,FP1,FP2,FP3,FP4,FP5,FP6,FP7,
-               FPCONTROL,FPSTATUS,FPIADDR
-              };
-
-typedef struct FrameStruct
-{
-    struct FrameStruct  *previous;
-    int       exceptionPC;      /* pc value when this frame created */
-    int       exceptionVector;  /* cpu vector causing exception     */
-    short     frameSize;        /* size of cpu frame in words       */
-    short     sr;               /* for 68000, this not always sr    */
-    int       pc;
-    short     format;
-    int       fsaveHeader;
-    int       morejunk[0];        /* exception frame, fp save... */
-} Frame;
-
-#define FRAMESIZE 500
-static Frame *lastFrame;
-static int   frameStack[FRAMESIZE];
-
-/*
- * these should not be static cuz they can be used outside this module
- */
-int registers[NUMREGBYTES/4];
-int superStack;
-
-static int remcomStack[400];
-static int* stackPtr = &remcomStack[399];
-
-/*
- * In many cases, the system will want to continue exception processing
- * when a continue command is given.  
- * oldExceptionHook is a function to invoke in this case.
- */
-
-static ExceptionHook oldExceptionHook;
-
-/* the size of the exception stack on the 68020 varies with the type of
- * exception.  The following table is the number of WORDS used
- * for each exception format.
- */
-static short exceptionSize[] = { 4,4,6,4,4,4,4,4,29,10,16,46,4,4,4,4 };
-
-/************* jump buffer used for setjmp/longjmp **************************/
-jmp_buf env;
-
-/***************************  ASSEMBLY CODE MACROS *************************/
-/*                                                                        */
-
-#ifdef __HAVE_68881__
-/* do an fsave, then remember the address to begin a restore from */
-#define SAVE_FP_REGS()    asm(" fsave   a0@-");                \
-                         asm(" fmovemx fp0-fp7,_registers+72");        \
-                         asm(" fmoveml fpcr/fpsr/fpi,_registers+168"); 
-#define RESTORE_FP_REGS() asm(" fmoveml _registers+168,fpcr/fpsr/fpi"); \
-                         asm(" fmovemx _registers+72,fp0-fp7");        \
-                         asm(" frestore a0@+");
-#else
-#define SAVE_FP_REGS()
-#define RESTORE_FP_REGS()
-#endif /* __HAVE_68881__ */
-
-asm("
-.text
-.globl _return_to_super
-_return_to_super:
-        movel   _registers+60,sp /* get new stack pointer */        
-        movel   _lastFrame,a0   /* get last frame info  */              
-        bra     return_to_any
-
-.globl _return_to_user
-_return_to_user:
-        movel   _registers+60,a0 /* get usp */                          
-        movel   a0,usp           /* set usp */                         
-        movel   _superStack,sp  /* get original stack pointer */        
-
-return_to_any:
-        movel   _lastFrame,a0   /* get last frame info  */              
-        movel   a0@+,_lastFrame /* link in previous frame     */        
-        addql   #8,a0           /* skip over pc, vector#*/              
-        movew   a0@+,d0         /* get # of words in cpu frame */       
-        addw    d0,a0           /* point to end of data        */       
-        addw    d0,a0           /* point to end of data        */       
-        movel   a0,a1                                                   
-#                                                                       
-# copy the stack frame                                                  
-        subql   #1,d0                                                   
-copyUserLoop:                                                               
-        movew   a1@-,sp@-                                               
-        dbf     d0,copyUserLoop                                             
-");                                                                     
-        RESTORE_FP_REGS()                                              
-   asm("   moveml  _registers,d0-d7/a0-a6");                           
-   asm("   rte");  /* pop and go! */                                    
-
-#define DISABLE_INTERRUPTS()   asm("         oriw   #0x0700,sr");
-#define BREAKPOINT() asm("   trap #1");
-
-/* this function is called immediately when a level 7 interrupt occurs */
-/* if the previous interrupt level was 7 then we're already servicing  */
-/* this interrupt and an rte is in order to return to the debugger.    */
-/* For the 68000, the offset for sr is 6 due to the jsr return address */
-asm("
-.text
-.globl __debug_level7
-__debug_level7:
-       movew   d0,sp@-");
-#ifdef mc68020
-asm("  movew   sp@(2),d0");
-#else
-asm("  movew   sp@(6),d0");
-#endif
-asm("  andiw   #0x700,d0
-       cmpiw   #0x700,d0
-       beq     _already7
-        movew   sp@+,d0        
-        bra     __catchException
-_already7:
-       movew   sp@+,d0");
-#ifndef mc68020
-asm("  lea     sp@(4),sp");     /* pull off 68000 return address */
-#endif
-asm("  rte");
-
-extern void _catchException();
-
-#ifdef mc68020
-/* This function is called when a 68020 exception occurs.  It saves
- * all the cpu and fpcp regs in the _registers array, creates a frame on a
- * linked list of frames which has the cpu and fpcp stack frames needed
- * to properly restore the context of these processors, and invokes
- * an exception handler (remcom_handler).
- *
- * stack on entry:                       stack on exit:
- *   N bytes of junk                     exception # MSWord
- *   Exception Format Word               exception # MSWord
- *   Program counter LSWord              
- *   Program counter MSWord             
- *   Status Register                    
- *                                       
- *                                       
- */
-asm(" 
-.text
-.globl __catchException
-__catchException:");
-DISABLE_INTERRUPTS();
-asm("
-        moveml  d0-d7/a0-a6,_registers /* save registers        */
-       movel   _lastFrame,a0   /* last frame pointer */
-");
-SAVE_FP_REGS();        
-asm("
-       lea     _registers,a5   /* get address of registers     */
-        movew   sp@,d1          /* get status register          */
-        movew   d1,a5@(66)      /* save sr                     */      
-       movel   sp@(2),a4       /* save pc in a4 for later use  */
-        movel   a4,a5@(68)      /* save pc in _regisers[]              */
-
-#
-# figure out how many bytes in the stack frame
-       movew   sp@(6),d0       /* get '020 exception format    */
-        movew   d0,d2           /* make a copy of format word   */
-        andiw   #0xf000,d0      /* mask off format type         */
-        rolw    #5,d0           /* rotate into the low byte *2  */
-        lea     _exceptionSize,a1   
-        addw    d0,a1           /* index into the table         */
-       movew   a1@,d0          /* get number of words in frame */
-        movew   d0,d3           /* save it                      */
-        subw    d0,a0          /* adjust save pointer          */
-        subw    d0,a0          /* adjust save pointer(bytes)   */
-       movel   a0,a1           /* copy save pointer            */
-       subql   #1,d0           /* predecrement loop counter    */
-#
-# copy the frame
-saveFrameLoop:
-       movew   sp@+,a1@+
-       dbf     d0,saveFrameLoop
-#
-# now that the stack has been clenaed,
-# save the a7 in use at time of exception
-        movel   sp,_superStack  /* save supervisor sp           */
-        andiw   #0x2000,d1      /* were we in supervisor mode ? */
-        beq     userMode       
-        movel   a7,a5@(60)      /* save a7                  */
-        bra     a7saveDone
-userMode:  
-       movel   usp,a1          
-        movel   a1,a5@(60)      /* save user stack pointer     */
-a7saveDone:
-
-#
-# save size of frame
-        movew   d3,a0@-
-
-#
-# compute exception number
-       andl    #0xfff,d2       /* mask off vector offset       */
-       lsrw    #2,d2           /* divide by 4 to get vect num  */
-        movel   d2,a0@-         /* save it                      */
-#
-# save pc causing exception
-        movel   a4,a0@-
-#
-# save old frame link and set the new value
-       movel   _lastFrame,a1   /* last frame pointer */
-       movel   a1,a0@-         /* save pointer to prev frame   */
-        movel   a0,_lastFrame
-
-        movel   d2,sp@-                /* push exception num           */
-       movel   _exceptionHook,a0  /* get address of handler */
-        jbsr    a0@             /* and call it */
-        jmp     __returnFromException     /* now, return        */
-");
-#else /* mc68000 */
-/* This function is called when an exception occurs.  It translates the
- * return address found on the stack into an exception vector # which
- * is then handled by either handle_exception or a system handler.
- * _catchException provides a front end for both.  
- *
- * stack on entry:                       stack on exit:
- *   Program counter MSWord              exception # MSWord 
- *   Program counter LSWord              exception # MSWord
- *   Status Register                     
- *   Return Address  MSWord              
- *   Return Address  LSWord             
- */
-asm("
-.text
-.globl __catchException
-__catchException:");
-DISABLE_INTERRUPTS();
-asm("
-        moveml d0-d7/a0-a6,_registers  /* save registers               */
-       movel   _lastFrame,a0   /* last frame pointer */
-");
-SAVE_FP_REGS();        
-asm("
-        lea     _registers,a5   /* get address of registers     */
-        movel   sp@+,d2         /* pop return address           */
-       addl    #1530,d2        /* convert return addr to       */
-       divs    #6,d2           /*  exception number            */
-       extl    d2   
-
-        moveql  #3,d3           /* assume a three word frame     */
-
-        cmpiw   #3,d2           /* bus error or address error ? */
-        bgt     normal          /* if >3 then normal error      */
-        movel   sp@+,a0@-       /* copy error info to frame buff*/
-        movel   sp@+,a0@-       /* these are never used         */
-        moveql  #7,d3           /* this is a 7 word frame       */
-     
-normal:   
-       movew   sp@+,d1         /* pop status register          */
-        movel   sp@+,a4         /* pop program counter          */
-        movew   d1,a5@(66)      /* save sr                     */      
-        movel   a4,a5@(68)      /* save pc in _regisers[]              */
-        movel   a4,a0@-         /* copy pc to frame buffer      */
-       movew   d1,a0@-         /* copy sr to frame buffer      */
-
-        movel   sp,_superStack  /* save supervisor sp          */
-
-        andiw   #0x2000,d1      /* were we in supervisor mode ? */
-        beq     userMode       
-        movel   a7,a5@(60)      /* save a7                  */
-        bra     saveDone             
-userMode:
-        movel   usp,a1         /* save user stack pointer      */
-        movel   a1,a5@(60)      /* save user stack pointer     */
-saveDone:
-
-        movew   d3,a0@-         /* push frame size in words     */
-        movel   d2,a0@-         /* push vector number           */
-        movel   a4,a0@-         /* push exception pc            */
-
-#
-# save old frame link and set the new value
-       movel   _lastFrame,a1   /* last frame pointer */
-       movel   a1,a0@-         /* save pointer to prev frame   */
-        movel   a0,_lastFrame
-
-        movel   d2,sp@-                /* push exception num           */
-       movel   _exceptionHook,a0  /* get address of handler */
-        jbsr    a0@             /* and call it */
-        jmp     __returnFromException     /* now, return        */
-");
-#endif
-
-
-/*
- * remcomHandler is a front end for handle_exception.  It moves the
- * stack pointer into an area reserved for debugger use in case the
- * breakpoint happened in supervisor mode.
- */
-asm("_remcomHandler:");
-asm("           addl    #4,sp");        /* pop off return address     */
-asm("           movel   sp@+,d0");      /* get the exception number   */
-asm("          movel   _stackPtr,sp"); /* move to remcom stack area  */
-asm("          movel   d0,sp@-");      /* push exception onto stack  */
-asm("          jbsr    _handle_exception");    /* this never returns */
-asm("           rts");                  /* return */
-
-void _returnFromException( Frame *frame )
-{
-    /* if no existing frame, dummy one up */
-    if (! frame)
-    {
-        frame = lastFrame -1;
-        frame->frameSize = 4;
-        frame->format = 0;
-        frame->fsaveHeader = 0;
-        frame->previous = lastFrame;
-    }
-
-#ifndef mc68020
-    /* a 68000 cannot use the internal info pushed onto a bus error
-     * or address error frame when doing an RTE so don't put this info
-     * onto the stack or the stack will creep every time this happens.
-     */
-    frame->frameSize=3;
-#endif
-
-    /* throw away any frames in the list after this frame */
-    lastFrame = frame;
-
-    frame->sr = registers[(int) PS];
-    frame->pc = registers[(int) PC];
-
-    if (registers[(int) PS] & 0x2000)
-    { 
-        /* return to supervisor mode... */
-        return_to_super();
-    }
-    else
-    { /* return to user mode */
-        return_to_user();
-    }
-}
-
-int hex(ch)
-char ch;
-{
-  if ((ch >= 'a') && (ch <= 'f')) return (ch-'a'+10);
-  if ((ch >= '0') && (ch <= '9')) return (ch-'0');
-  return (0);
-}
-
-
-/* scan for the sequence $<data>#<checksum>     */
-void getpacket(buffer)
-char * buffer;
-{
-  unsigned char checksum;
-  unsigned char xmitcsum;
-  int  i;
-  int  count;
-  char ch;
-  
-  do {
-    /* wait around for the start character, ignore all other characters */
-    while ((ch = getDebugChar()) != '$'); 
-    checksum = 0;
-    count = 0;
-    
-    /* now, read until a # or end of buffer is found */
-    while (count < BUFMAX) {
-      ch = getDebugChar();
-      if (ch == '#') break;
-      checksum = checksum + ch;
-      buffer[count] = ch;
-      count = count + 1;
-      }
-    buffer[count] = 0;
-
-    if (ch == '#') {
-      xmitcsum = hex(getDebugChar()) << 4;
-      xmitcsum += hex(getDebugChar());
-      if ((remote_debug ) && (checksum != xmitcsum)) {
-        fprintf(stderr,"bad checksum.  My count = 0x%x, sent=0x%x. buf=%s\n",
-                                                    checksum,xmitcsum,buffer);
-      }
-      
-      if (checksum != xmitcsum) putDebugChar('-');  /* failed checksum */ 
-      else {
-        putDebugChar('+');  /* successful transfer */
-        /* if a sequence char is present, reply the sequence ID */
-        if (buffer[2] == ':') {
-           putDebugChar( buffer[0] );
-           putDebugChar( buffer[1] );
-           /* remove sequence chars from buffer */
-           count = strlen(buffer);
-           for (i=3; i <= count; i++) buffer[i-3] = buffer[i];
-        } 
-      } 
-    } 
-  } while (checksum != xmitcsum);
-  
-}
-
-/* send the packet in buffer.  The host get's one chance to read it.  
-   This routine does not wait for a positive acknowledge.  */
-
-
-void putpacket(buffer)
-char * buffer;
-{
-  unsigned char checksum;
-  int  count;
-  char ch;
-  
-  /*  $<packet info>#<checksum>. */
-  do {
-  putDebugChar('$');
-  checksum = 0;
-  count    = 0;
-  
-  while (ch=buffer[count]) {
-    if (! putDebugChar(ch)) return;
-    checksum += ch;
-    count += 1;
-  }
-  
-  putDebugChar('#');
-  putDebugChar(hexchars[checksum >> 4]);
-  putDebugChar(hexchars[checksum % 16]);
-
-  } while (1 == 0);  /* (getDebugChar() != '+'); */
-  
-}
-
-static char  inbuffer[BUFMAX];
-static char  outbuffer[BUFMAX];
-static short error;
-
-
-void debug_error(format, parm)
-char * format;
-char * parm;
-{
-  if (remote_debug) fprintf(stderr,format,parm);
-}
-
-/* convert the memory pointed to by mem into hex, placing result in buf */
-/* return a pointer to the last char put in buf (null) */
-char* mem2hex(mem, buf, count)
-char* mem;
-char* buf;
-int   count;
-{
-      int i;
-      unsigned char ch;
-      for (i=0;i<count;i++) {
-          ch = *mem++;
-          *buf++ = hexchars[ch >> 4];
-          *buf++ = hexchars[ch % 16];
-      }
-      *buf = 0; 
-      return(buf);
-}
-
-/* convert the hex array pointed to by buf into binary to be placed in mem */
-/* return a pointer to the character AFTER the last byte written */
-char* hex2mem(buf, mem, count)
-char* buf;
-char* mem;
-int   count;
-{
-      int i;
-      unsigned char ch;
-      for (i=0;i<count;i++) {
-          ch = hex(*buf++) << 4;
-          ch = ch + hex(*buf++);
-          *mem++ = ch;
-      }
-      return(mem);
-}
-
-/* a bus error has occurred, perform a longjmp
-   to return execution and allow handling of the error */
-
-void handle_buserror()
-{
-  longjmp(env,1);
-}
-
-/* this function takes the 68000 exception number and attempts to 
-   translate this number into a unix compatible signal value */
-int computeSignal( exceptionVector )
-int exceptionVector;
-{
-  int sigval;
-  switch (exceptionVector) {
-    case 2 : sigval = 10; break; /* bus error           */
-    case 3 : sigval = 10; break; /* address error       */
-    case 4 : sigval = 4;  break; /* illegal instruction */
-    case 5 : sigval = 8;  break; /* zero divide         */
-    case 6 : sigval = 16; break; /* chk instruction     */
-    case 7 : sigval = 16; break; /* trapv instruction   */
-    case 8 : sigval = 11; break; /* privilege violation */
-    case 9 : sigval = 5;  break; /* trace trap          */
-    case 10: sigval = 4;  break; /* line 1010 emulator  */
-    case 11: sigval = 4;  break; /* line 1111 emulator  */
-    case 31: sigval = 2;  break; /* interrupt           */
-    case 33: sigval = 5;  break; /* breakpoint          */
-    case 40: sigval = 8;  break; /* floating point err  */
-    case 48: sigval = 8;  break; /* floating point err  */
-    case 49: sigval = 8;  break; /* floating point err  */
-    case 50: sigval = 8;  break; /* zero divide         */
-    case 51: sigval = 8;  break; /* underflow           */
-    case 52: sigval = 8;  break; /* operand error       */
-    case 53: sigval = 8;  break; /* overflow            */
-    case 54: sigval = 8;  break; /* NAN                 */
-    default: 
-      sigval = 7;         /* "software generated"*/
-  }
-  return (sigval);
-}
-
-/*
- * This function does all command procesing for interfacing to gdb.
- */
-void handle_exception(int exceptionVector)
-{
-  int    sigval;
-  int    addr, length;
-  char * ptr;
-  int    newPC;
-  Frame  *frame;
-  
-  if (remote_debug) printf("vector=%d, sr=0x%x, pc=0x%x\n", 
-                           exceptionVector,
-                           registers[ PS ], 
-                           registers[ PC ]);
-
-  /* reply to host that an exception has occurred */
-  sigval = computeSignal( exceptionVector );
-  sprintf(outbuffer,"S%02x",sigval);
-  putpacket(outbuffer); 
-
-  while (1==1) { 
-    error = 0;
-    outbuffer[0] = 0;
-    getpacket(inbuffer);
-    switch (inbuffer[0]) {
-      case '?' : sprintf(outbuffer,"S%02x",sigval);
-                 break; 
-      case 'd' : remote_debug = !(remote_debug);  /* toggle debug flag */
-                 break; 
-      case 'g' : /* return the value of the CPU registers */
-                mem2hex((char*) registers, outbuffer, NUMREGBYTES);
-                break;
-      case 'G' : /* set the value of the CPU registers - return OK */
-                hex2mem(&inbuffer[1], (char*) registers, NUMREGBYTES);
-                strcpy(outbuffer,"OK");
-                break;
-      
-      /* mAA..AA,LLLL  Read LLLL bytes at address AA..AA */
-      case 'm' : 
-               if (setjmp(env) == 0) {
-                   exceptionHandler(2,handle_buserror); 
-
-                   if (2 == sscanf(&inbuffer[1],"%x,%x",&addr,&length)) {
-                     mem2hex((char*) addr, outbuffer, length);
-                   }
-                   else {
-                     strcpy(outbuffer,"E01");
-                     debug_error("malformed read memory command: %s",inbuffer);
-                     }     
-                } 
-               else {
-                 exceptionHandler(2,_catchException);   
-                 strcpy(outbuffer,"E03");
-                 debug_error("bus error");
-                 }     
-                
-               /* restore handler for bus error */
-               exceptionHandler(2,_catchException);   
-               break;
-      
-      /* MAA..AA,LLLL: Write LLLL bytes at address AA.AA return OK */
-      case 'M' : 
-               if (setjmp(env) == 0) {
-                   exceptionHandler(2,handle_buserror); 
-
-                   if (2 == sscanf(&inbuffer[1],"%x,%x:",&addr,&length)) {
-                     ptr = strchr(inbuffer,':');
-                     ptr += 1; /* point 1 past the colon */
-                     hex2mem(ptr, (char*) addr, length);
-                     strcpy(outbuffer,"OK");
-                   }
-                   else {
-                     strcpy(outbuffer,"E02");
-                     debug_error("malformed write memory command: %s",inbuffer);
-                     }     
-                } 
-               else {
-                 exceptionHandler(2,_catchException);   
-                 strcpy(outbuffer,"E03");
-                 debug_error("bus error");
-                 }     
-                break;
-     
-     /* cAA..AA    Continue at address AA..AA(optional) */
-     /* sAA..AA   Step one instruction from AA..AA(optional) */
-     case 'c' : 
-     case 's' : 
-          /* try to read optional parameter, addr unchanged if no parm */
-          if (1 == sscanf(&inbuffer[1],"%x",&registers[ PC ])); 
-          newPC = registers[ PC];
-          
-          /* clear the trace bit */
-          registers[ PS ] &= 0x7fff;
-          
-          /* set the trace bit if we're stepping */
-          if (inbuffer[0] == 's') registers[ PS ] |= 0x8000;
-          
-          /*
-           * look for newPC in the linked list of exception frames.
-           * if it is found, use the old frame it.  otherwise,
-           * fake up a dummy frame in returnFromException().
-           */
-          if (remote_debug) printf("new pc = 0x%x\n",newPC);
-          frame = lastFrame;
-          while (frame)
-          {
-              if (remote_debug)
-                  printf("frame at 0x%x has pc=0x%x, except#=%d\n",
-                         frame,frame->exceptionPC,
-                         frame->exceptionVector);
-              if (frame->exceptionPC == newPC) break;  /* bingo! a match */
-              /*
-               * for a breakpoint instruction, the saved pc may
-               * be off by two due to re-executing the instruction
-               * replaced by the trap instruction.  Check for this.
-               */
-              if ((frame->exceptionVector == 33) &&
-                  (frame->exceptionPC == (newPC+2))) break;
-              frame = frame->previous;
-          }
-          
-          /*
-           * If we found a match for the PC AND we are not returning
-           * as a result of a breakpoint (33),
-           * trace exception (9), nmi (31), jmp to
-           * the old exception handler as if this code never ran.
-           */
-          if (frame) 
-          {
-              if ((frame->exceptionVector != 9)  && 
-                  (frame->exceptionVector != 31) && 
-                  (frame->exceptionVector != 33))
-              { 
-                  /*
-                   * invoke the previous handler.
-                   */
-                  if (oldExceptionHook)
-                      (*oldExceptionHook) (frame->exceptionVector);
-                  newPC = registers[ PC ];    /* pc may have changed  */
-                  if (newPC != frame->exceptionPC)
-                  {
-                      if (remote_debug)
-                          printf("frame at 0x%x has pc=0x%x, except#=%d\n",
-                                 frame,frame->exceptionPC,
-                                 frame->exceptionVector);
-                      /* dispose of this frame, we're skipping it (longjump?)*/
-                      lastFrame = frame->previous;
-                      frame = (Frame *) 0;
-                  }
-              }
-          }         
-
-          _returnFromException( frame );
-
-          break;
-          
-      /* kill the program */
-      case 'k' :  /* do nothing */
-                break;
-      } /* switch */ 
-    
-    /* reply to the request */
-    putpacket(outbuffer); 
-    }
-}
-
-
-/* this function is used to set up exception handlers for tracing and 
-   breakpoints */
-void set_debug_traps()
-{
-extern void _debug_level7();
-extern void remcomHandler();
-int exception;
-
-  for (exception = 2; exception <= 23; exception++)
-      exceptionHandler(exception,_catchException);   
-
-  /* level 7 interrupt              */
-  exceptionHandler(31,_debug_level7);    
-  
-  /* breakpoint exception (trap #1) */
-  exceptionHandler(33,_catchException);
-  
-  /* floating point error (trap #8) */
-  exceptionHandler(40,_catchException);
-  
-  /* 48 to 54 are floating point coprocessor errors */
-  for (exception = 48; exception <= 54; exception++)
-      exceptionHandler(exception,_catchException);   
-
-  if (oldExceptionHook != remcomHandler)
-  {
-      oldExceptionHook = exceptionHook;
-      exceptionHook    = remcomHandler;
-  }
-  
-  initialized = 1;
-
-  lastFrame = (Frame *) &frameStack[FRAMESIZE-1];
-  lastFrame->previous = (Frame *) 0;
-}
-
-/* This function will generate a breakpoint exception.  It is used at the
-   beginning of a program to sync up with a debugger and can be used
-   otherwise as a quick means to stop program execution and "break" into
-   the debugger. */
-   
-void breakpoint()
-{
-  if (initialized) BREAKPOINT();
-}
-
-@EOF
-
-chmod 444 remcom.c
-
-exit 0
-
index aebd693..e69de29 100644 (file)
@@ -1,794 +0,0 @@
-/* Remote target communications for serial-line targets in custom GDB protocol
-   Copyright 1988, 1991, 1992 Free Software Foundation, Inc.
-
-This file is part of GDB.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-/* Remote communication protocol.
-   All values are encoded in ascii hex digits.
-
-       Request         Packet
-
-       read registers  g
-       reply           XX....X         Each byte of register data
-                                       is described by two hex digits.
-                                       Registers are in the internal order
-                                       for GDB, and the bytes in a register
-                                       are in the same order the machine uses.
-                       or ENN          for an error.
-
-       write regs      GXX..XX         Each byte of register data
-                                       is described by two hex digits.
-       reply           OK              for success
-                       ENN             for an error
-
-       read mem        mAA..AA,LLLL    AA..AA is address, LLLL is length.
-       reply           XX..XX          XX..XX is mem contents
-                       or ENN          NN is errno
-
-       write mem       MAA..AA,LLLL:XX..XX
-                                       AA..AA is address,
-                                       LLLL is number of bytes,
-                                       XX..XX is data
-       reply           OK              for success
-                       ENN             for an error
-
-       cont            cAA..AA         AA..AA is address to resume
-                                       If AA..AA is omitted,
-                                       resume at same address.
-
-       step            sAA..AA         AA..AA is address to resume
-                                       If AA..AA is omitted,
-                                       resume at same address.
-
-       last signal     ?               Reply the current reason for stopping.
-                                        This is the same reply as is generated
-                                       for step or cont : SAA where AA is the
-                                       signal number.
-
-       There is no immediate reply to step or cont.
-       The reply comes when the machine stops.
-       It is           SAA             AA is the "signal number"
-
-       or...           TAAPPPPPPPPFFFFFFFF
-                                       where AA is the signal number,
-                                       PPPPPPPP is the PC (PC_REGNUM), and
-                                       FFFFFFFF is the frame ptr (FP_REGNUM).
-
-       kill req        k
-*/
-
-#include "defs.h"
-#include <string.h>
-#include "serial.h"
-#include "frame.h"
-#include "inferior.h"
-#include "target.h"
-#include "wait.h"
-#include "terminal.h"
-#include "gdbcmd.h"
-
-#include <signal.h>
-
-static int kiodebug = 0;
-static int timeout = 5;
-
-#define        PBUFSIZ 1024
-
-/* Maximum number of bytes to read/write at once.  The value here
-   is chosen to fill up a packet (the headers account for the 32).  */
-#define MAXBUFBYTES ((PBUFSIZ-32)/2)
-
-/* Round up PBUFSIZ to hold all the registers, at least.  */
-#if REGISTER_BYTES > MAXBUFBYTES
-#undef PBUFSIZ
-#define        PBUFSIZ (REGISTER_BYTES * 2 + 32)
-#endif
-\f
-/* remote_detach()
-   takes a program previously attached to and detaches it.
-   We better not have left any breakpoints
-   in the program or it'll die when it hits one.
-   Close the open connection to the remote debugger.
-   Use this when you want to detach and do something else
-   with your gdb.  */
-
-static void
-remote_detach (args, from_tty)
-     char *args;
-     int from_tty;
-{
-  if (args)
-    error ("Argument given to \"detach\" when remotely debugging.");
-  
-  pop_target ();
-  if (from_tty)
-    printf ("Ending remote debugging.\n");
-}
-
-/* Convert hex digit A to a number.  */
-
-static int
-fromhex (a)
-     int a;
-{
-  if (a >= '0' && a <= '9')
-    return a - '0';
-  else if (a >= 'a' && a <= 'f')
-    return a - 'a' + 10;
-  else
-    error ("Reply contains invalid hex digit");
-  return -1;
-}
-
-/* Convert number NIB to a hex digit.  */
-
-static int
-tohex (nib)
-     int nib;
-{
-  if (nib < 10)
-    return '0'+nib;
-  else
-    return 'a'+nib-10;
-}
-\f
-/* Tell the remote machine to resume.  */
-
-/* Send a packet to the remote machine, with error checking.
-   The data of the packet is in BUF.  */
-
-static void
-putpkt (buf)
-     char *buf;
-{
-  int i;
-  unsigned char csum = 0;
-  char buf2[PBUFSIZ];
-  int cnt = strlen (buf);
-  char ch;
-  char *p;
-
-  /* Copy the packet into buffer BUF2, encapsulating it
-     and giving it a checksum.  */
-
-  if (cnt > sizeof(buf2) - 5)          /* Prosanity check */
-    abort();
-
-  p = buf2;
-  *p++ = '$';
-
-  for (i = 0; i < cnt; i++)
-    {
-      csum += buf[i];
-      *p++ = buf[i];
-    }
-  *p++ = '#';
-  *p++ = tohex ((csum >> 4) & 0xf);
-  *p++ = tohex (csum & 0xf);
-
-  /* Send it over and over until we get a positive ack.  */
-
-  do {
-    if (kiodebug)
-      {
-       *p = '\0';
-       printf ("Sending packet: %s...", buf2);  fflush(stdout);
-      }
-    serial_write (buf2, p - buf2);
-
-    /* read until either a timeout occurs (\0) or '+' is read */
-    do {
-      ch = readchar ();
-      if (kiodebug) {
-       if (ch == '+')
-         printf("Ack\n");
-       else
-         printf ("%02X%c ", ch&0xFF, ch);
-      }
-    } while ((ch != '+') && (ch != '\0'));
-  } while (ch != '+');
-}
-
-/* Read a packet from the remote machine, with error checking,
-   and store it in BUF.  BUF is expected to be of size PBUFSIZ.  */
-
-static void
-getpkt (buf)
-     char *buf;
-{
-  char *bp;
-  unsigned char csum;
-  int c;
-  unsigned char c1, c2;
-
-  while (1)
-    {
-      /* Force csum to be zero here because of possible error retry.  */
-      csum = 0;
-      
-      while ((c = readchar()) != '$');
-
-      bp = buf;
-      while (1)
-       {
-         c = readchar ();
-         if (c == '#')
-           break;
-         if (bp >= buf+PBUFSIZ-1)
-         {
-           *bp = '\0';
-           printf_filtered ("Remote packet too long: %s\n", buf);
-           goto whole;
-         }
-         *bp++ = c;
-         csum += c;
-       }
-      *bp = 0;
-
-      c1 = fromhex (readchar ());
-      c2 = fromhex (readchar ());
-      if ((csum & 0xff) == (c1 << 4) + c2)
-       break;
-      printf_filtered ("Bad checksum, sentsum=0x%x, csum=0x%x, buf=%s\n",
-             (c1 << 4) + c2, csum & 0xff, buf);
-      /* Try the whole thing again.  */
-whole:
-      serial_write ("-", 1);
-    }
-
-#if 0
-  immediate_quit--;
-#endif
-
-  serial_write ("+", 1);
-
-  if (kiodebug)
-    fprintf (stderr,"Packet received: %s\n", buf);
-}
-
-static void
-remote_resume (step, siggnal)
-     int step, siggnal;
-{
-  char buf[PBUFSIZ];
-
-  if (siggnal)
-    error ("Can't send signals to a remote system.  Try `handle %d ignore'.",
-          siggnal);
-
-#if 0
-  dcache_flush ();
-#endif
-
-  strcpy (buf, step ? "s": "c");
-
-  putpkt (buf);
-}
-
-/* Send ^C to target to halt it.  Target will respond, and send us a
-   packet.  */
-
-void remote_interrupt(signo)
-     int signo;
-{
-  
-  if (kiodebug)
-    printf ("remote_interrupt called\n");
-
-  serial_write ("\003", 1);    /* Send a ^C */
-}
-
-
-/* Wait until the remote machine stops, then return,
-   storing status in STATUS just as `wait' would.
-   Returns "pid" (though it's not clear what, if anything, that
-   means in the case of this target).  */
-
-static int
-remote_wait (status)
-     WAITTYPE *status;
-{
-  unsigned char buf[PBUFSIZ];
-  void (*ofunc)();
-  unsigned char *p;
-  int i;
-  char regs[REGISTER_RAW_SIZE (PC_REGNUM) + REGISTER_RAW_SIZE (FP_REGNUM)];
-
-  WSETEXIT ((*status), 0);
-
-  ofunc = (void (*)()) signal (SIGINT, remote_interrupt);
-  getpkt ((char *) buf);
-  signal (SIGINT, ofunc);
-
-  if (buf[0] == 'E')
-    error ("Remote failure reply: %s", buf);
-  if (buf[0] == 'T')
-    {
-      /* Expedited reply, containing Signal, PC, and FP.  */
-      p = &buf[3];             /* after Txx */
-      for (i = 0; i < sizeof (regs); i++)
-       {
-         if (p[0] == 0 || p[1] == 0)
-           error ("Remote reply is too short: %s", buf);
-         regs[i] = fromhex (p[0]) * 16 + fromhex (p[1]);
-         p += 2;
-       }
-      supply_register (PC_REGNUM, &regs[0]);
-      supply_register (FP_REGNUM, &regs[REGISTER_RAW_SIZE (PC_REGNUM)]);
-    }
-  else if (buf[0] != 'S')
-    error ("Invalid remote reply: %s", buf);
-
-  WSETSTOP ((*status), (((fromhex (buf[1])) << 4) + (fromhex (buf[2]))));
-
-  return 0;
-}
-
-/* Send the command in BUF to the remote machine,
-   and read the reply into BUF.
-   Report an error if we get an error reply.  */
-
-static void
-remote_send (buf)
-     char *buf;
-{
-
-  putpkt (buf);
-  getpkt (buf);
-
-  if (buf[0] == 'E')
-    error ("Remote failure reply: %s", buf);
-}
-
-/* Read the remote registers into the block REGS.  */
-/* Currently we just read all the registers, so we don't use regno.  */
-/* ARGSUSED */
-static void
-remote_fetch_registers (regno)
-     int regno;
-{
-  char buf[PBUFSIZ];
-  int i;
-  char *p;
-  char regs[REGISTER_BYTES];
-
-  sprintf (buf, "g");
-  remote_send (buf);
-
-  /* Reply describes registers byte by byte, each byte encoded as two
-     hex characters.  Suck them all up, then supply them to the
-     register cacheing/storage mechanism.  */
-
-  p = buf;
-  for (i = 0; i < REGISTER_BYTES; i++)
-    {
-      if (p[0] == 0 || p[1] == 0)
-       error ("Remote reply is too short: %s", buf);
-      regs[i] = fromhex (p[0]) * 16 + fromhex (p[1]);
-      p += 2;
-    }
-  for (i = 0; i < NUM_REGS; i++)
-    supply_register (i, &regs[REGISTER_BYTE(i)]);
-}
-
-/* Prepare to store registers.  Since we send them all, we have to
-   read out the ones we don't want to change first.  */
-
-static void 
-remote_prepare_to_store ()
-{
-  remote_fetch_registers (-1);
-}
-
-/* Store the remote registers from the contents of the block REGISTERS. 
-   FIXME, eventually just store one register if that's all that is needed.  */
-
-/* ARGSUSED */
-static void
-remote_store_registers (regno)
-     int regno;
-{
-  char buf[PBUFSIZ];
-  int i;
-  char *p;
-
-  buf[0] = 'G';
-  
-  /* Command describes registers byte by byte,
-     each byte encoded as two hex characters.  */
-
-  p = buf + 1;
-  for (i = 0; i < REGISTER_BYTES; i++)
-    {
-      *p++ = tohex ((registers[i] >> 4) & 0xf);
-      *p++ = tohex (registers[i] & 0xf);
-    }
-  *p = '\0';
-
-  remote_send (buf);
-}
-
-\f
-/* Write memory data directly to the remote machine.
-   This does not inform the data cache; the data cache uses this.
-   MEMADDR is the address in the remote memory space.
-   MYADDR is the address of the buffer in our space.
-   LEN is the number of bytes.  */
-
-static void
-remote_write_bytes (memaddr, myaddr, len)
-     CORE_ADDR memaddr;
-     char *myaddr;
-     int len;
-{
-  char buf[PBUFSIZ];
-  int i;
-  char *p;
-
-  if (len > PBUFSIZ / 2 - 20)
-    abort ();
-
-  sprintf (buf, "M%x,%x:", memaddr, len);
-
-  /* We send target system values byte by byte, in increasing byte addresses,
-     each byte encoded as two hex characters.  */
-
-  p = buf + strlen (buf);
-  for (i = 0; i < len; i++)
-    {
-      *p++ = tohex ((myaddr[i] >> 4) & 0xf);
-      *p++ = tohex (myaddr[i] & 0xf);
-    }
-  *p = '\0';
-
-  remote_send (buf);
-}
-
-/* Read memory data directly from the remote machine.
-   This does not use the data cache; the data cache uses this.
-   MEMADDR is the address in the remote memory space.
-   MYADDR is the address of the buffer in our space.
-   LEN is the number of bytes.  */
-
-static void
-remote_read_bytes (memaddr, myaddr, len)
-     CORE_ADDR memaddr;
-     char *myaddr;
-     int len;
-{
-  char buf[PBUFSIZ];
-  int i;
-  char *p;
-
-  if (len > PBUFSIZ / 2 - 1)
-    abort ();
-
-  sprintf (buf, "m%x,%x", memaddr, len);
-  remote_send (buf);
-
-  /* Reply describes memory byte by byte,
-     each byte encoded as two hex characters.  */
-
-  p = buf;
-  for (i = 0; i < len; i++)
-    {
-      if (p[0] == 0 || p[1] == 0)
-       error ("Remote reply is too short: %s", buf);
-      myaddr[i] = fromhex (p[0]) * 16 + fromhex (p[1]);
-      p += 2;
-    }
-}
-\f
-/* Read or write LEN bytes from inferior memory at MEMADDR, transferring
-   to or from debugger address MYADDR.  Write to inferior if SHOULD_WRITE is
-   nonzero.  Returns length of data written or read; 0 for error.  */
-
-/* ARGSUSED */
-static int
-remote_xfer_memory(memaddr, myaddr, len, should_write, target)
-     CORE_ADDR memaddr;
-     char *myaddr;
-     int len;
-     int should_write;
-     struct target_ops *target;                        /* ignored */
-{
-  int origlen = len;
-  int xfersize;
-  while (len > 0)
-    {
-      if (len > MAXBUFBYTES)
-       xfersize = MAXBUFBYTES;
-      else
-       xfersize = len;
-
-      if (should_write)
-        remote_write_bytes(memaddr, myaddr, xfersize);
-      else
-       remote_read_bytes (memaddr, myaddr, xfersize);
-      memaddr += xfersize;
-      myaddr  += xfersize;
-      len     -= xfersize;
-    }
-  return origlen; /* no error possible */
-}
-
-static void
-remote_files_info (ignore)
-struct target_ops *ignore;
-{
-  printf ("Debugging a target over a serial line.\n");
-}
-\f
-/*
-
-A debug packet whose contents are <data>
-is encapsulated for transmission in the form:
-
-       $ <data> # CSUM1 CSUM2
-
-       <data> must be ASCII alphanumeric and cannot include characters
-       '$' or '#'
-
-       CSUM1 and CSUM2 are ascii hex representation of an 8-bit 
-       checksum of <data>, the most significant nibble is sent first.
-       the hex digits 0-9,a-f are used.
-
-Receiver responds with:
-
-       +       - if CSUM is correct and ready for next packet
-       -       - if CSUM is incorrect
-
-*/
-
-/* Read a single character from the remote end.
-   (If supported, we actually read many characters and buffer them up.)  */
-
-static int
-readchar ()
-{
-  static int inbuf_index, inbuf_count;
-#define        INBUFSIZE       PBUFSIZ
-  static char inbuf[INBUFSIZE];
-
-  if (inbuf_index >= inbuf_count)
-    {
-      /* Time to do another read... */
-      inbuf_index = 0;
-      inbuf_count = 0;
-      inbuf[0] = 0;            /* Just in case */
-      if ((inbuf[inbuf_index] = serial_readchar (timeout)) < 0)
-       inbuf_count = -1;
-      else
-       inbuf_count = 1;
-    }
-
-  /* Just return the next character from the buffer.  */
-  return inbuf[inbuf_index++] & 0x7f;
-}
-
-
-\f
-/* The data cache leads to incorrect results because it doesn't know about
-   volatile variables, thus making it impossible to debug functions which
-   use hardware registers.  Therefore it is #if 0'd out.  Effect on
-   performance is some, for backtraces of functions with a few
-   arguments each.  For functions with many arguments, the stack
-   frames don't fit in the cache blocks, which makes the cache less
-   helpful.  Disabling the cache is a big performance win for fetching
-   large structures, because the cache code fetched data in 16-byte
-   chunks.  */
-#if 0
-/* The data cache records all the data read from the remote machine
-   since the last time it stopped.
-
-   Each cache block holds 16 bytes of data
-   starting at a multiple-of-16 address.  */
-
-#define DCACHE_SIZE 64         /* Number of cache blocks */
-
-struct dcache_block {
-       struct dcache_block *next, *last;
-       unsigned int addr;      /* Address for which data is recorded.  */
-       int data[4];
-};
-
-struct dcache_block dcache_free, dcache_valid;
-
-/* Free all the data cache blocks, thus discarding all cached data.  */ 
-
-static void
-dcache_flush ()
-{
-  register struct dcache_block *db;
-
-  while ((db = dcache_valid.next) != &dcache_valid)
-    {
-      remque (db);
-      insque (db, &dcache_free);
-    }
-}
-
-/*
- * If addr is present in the dcache, return the address of the block 
- * containing it.
- */
-
-struct dcache_block *
-dcache_hit (addr)
-{
-  register struct dcache_block *db;
-
-  if (addr & 3)
-    abort ();
-
-  /* Search all cache blocks for one that is at this address.  */
-  db = dcache_valid.next;
-  while (db != &dcache_valid)
-    {
-      if ((addr & 0xfffffff0) == db->addr)
-       return db;
-      db = db->next;
-    }
-  return NULL;
-}
-
-/*  Return the int data at address ADDR in dcache block DC.  */
-
-int
-dcache_value (db, addr)
-     struct dcache_block *db;
-     unsigned int addr;
-{
-  if (addr & 3)
-    abort ();
-  return (db->data[(addr>>2)&3]);
-}
-
-/* Get a free cache block, put it on the valid list,
-   and return its address.  The caller should store into the block
-   the address and data that it describes.  */
-
-struct dcache_block *
-dcache_alloc ()
-{
-  register struct dcache_block *db;
-
-  if ((db = dcache_free.next) == &dcache_free)
-    /* If we can't get one from the free list, take last valid */
-    db = dcache_valid.last;
-
-  remque (db);
-  insque (db, &dcache_valid);
-  return (db);
-}
-
-/* Return the contents of the word at address ADDR in the remote machine,
-   using the data cache.  */
-
-int
-dcache_fetch (addr)
-     CORE_ADDR addr;
-{
-  register struct dcache_block *db;
-
-  db = dcache_hit (addr);
-  if (db == 0)
-    {
-      db = dcache_alloc ();
-      remote_read_bytes (addr & ~0xf, db->data, 16);
-      db->addr = addr & ~0xf;
-    }
-  return (dcache_value (db, addr));
-}
-
-/* Write the word at ADDR both in the data cache and in the remote machine.  */
-
-dcache_poke (addr, data)
-     CORE_ADDR addr;
-     int data;
-{
-  register struct dcache_block *db;
-
-  /* First make sure the word is IN the cache.  DB is its cache block.  */
-  db = dcache_hit (addr);
-  if (db == 0)
-    {
-      db = dcache_alloc ();
-      remote_read_bytes (addr & ~0xf, db->data, 16);
-      db->addr = addr & ~0xf;
-    }
-
-  /* Modify the word in the cache.  */
-  db->data[(addr>>2)&3] = data;
-
-  /* Send the changed word.  */
-  remote_write_bytes (addr, &data, 4);
-}
-
-/* Initialize the data cache.  */
-
-dcache_init ()
-{
-  register i;
-  register struct dcache_block *db;
-
-  db = (struct dcache_block *) xmalloc (sizeof (struct dcache_block) * 
-                                       DCACHE_SIZE);
-  dcache_free.next = dcache_free.last = &dcache_free;
-  dcache_valid.next = dcache_valid.last = &dcache_valid;
-  for (i=0;i<DCACHE_SIZE;i++,db++)
-    insque (db, &dcache_free);
-}
-#endif /* 0 */
-
-/* Define the target subroutine names */
-
-struct target_ops remote_ops = {
-  "remote-ser",                        /* to_shortname */
-  "Remote serial target in gdb-specific protocol with serial-packaging routines",      /* to_longname */
-  "Use a remote computer via a serial line, using a gdb-specific protocol.\n\
-Specify the serial device it is connected to (e.g. /dev/ttya).",  /* to_doc */
-  serial_open,                 /* to_open */
-  serial_close,                        /* to_close */
-  NULL,                                /* to_attach */
-  remote_detach,               /* to_detach */
-  remote_resume,               /* to_resume */
-  remote_wait,                 /* to_wait */
-  remote_fetch_registers,      /* to_fetch_registers */
-  remote_store_registers,      /* to_store_registers */
-  remote_prepare_to_store,     /* to_prepare_to_store */
-  NULL,                                /* to_convert_to_virtual */
-  NULL,                                /* to_convert_from_virtual */
-  remote_xfer_memory,          /* to_xfer_memory */
-  remote_files_info,           /* to_files_info */
-  NULL,                                /* to_insert_breakpoint */
-  NULL,                                /* to_remove_breakpoint */
-  NULL,                                /* to_terminal_init */
-  NULL,                                /* to_terminal_inferior */
-  NULL,                                /* to_terminal_ours_for_output */
-  NULL,                                /* to_terminal_ours */
-  NULL,                                /* to_terminal_info */
-  NULL,                                /* to_kill */
-  NULL,                                /* to_load */
-  NULL,                                /* to_lookup_symbol */
-  NULL,                                /* to_create_inferior */
-  NULL,                                /* to_mourn_inferior */
-  process_stratum,             /* to_stratum */
-  NULL,                                /* to_next */
-  1,                           /* to_has_all_memory */
-  1,                           /* to_has_memory */
-  1,                           /* to_has_stack */
-  1,                           /* to_has_registers */
-  1,                           /* to_has_execution */
-  NULL,                                /* sections */
-  NULL,                                /* sections_end */
-  OPS_MAGIC                    /* to_magic */
-};
-
-void
-_initialize_remote ()
-{
-  add_target (&remote_ops);
-
-  add_show_from_set (
-    add_set_cmd ("remotedebug", no_class, var_boolean, (char *)&kiodebug,
-                  "Set debugging of remote serial I/O.\n\
-When enabled, each packet sent or received with the remote target\n\
-is displayed.", &setlist),
-       &showlist);
-}
-
diff --git a/gdb/remote-vx.68.c b/gdb/remote-vx.68.c
deleted file mode 100644 (file)
index f41ce7f..0000000
+++ /dev/null
@@ -1,1539 +0,0 @@
-/* Memory-access and commands for remote VxWorks processes, for GDB.
-   Copyright 1990, 1991 Free Software Foundation, Inc.
-   Contributed by Wind River Systems and Cygnus Support.
-
-This file is part of GDB.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-#define         TM_FILE_OVERRIDE
-#include "defs.h"
-#include "tm-vxworks68.h"
-#include "frame.h"
-#include "inferior.h"
-#include "wait.h"
-#include "target.h"
-#include "gdbcore.h"
-#include "command.h"
-#include "symtab.h"
-#include "symfile.h"           /* for struct complaint */
-
-#include <string.h>
-#include <errno.h>
-#include <signal.h>
-#include <fcntl.h>
-#include <sys/types.h>
-#include <sys/time.h>
-#include <sys/socket.h>
-#define free bogon_free                /* Sun claims "int free()" not void */
-#include <rpc/rpc.h>
-#undef free
-#include <netdb.h>
-#include <ptrace.h>
-#include "xdr_ptrace.h"
-#include "xdr_ld.h"
-#include "xdr_rdb.h"
-#include "dbgRpcLib.h"
-
-/* get rid of value.h if possible */
-#include <value.h>
-#include <symtab.h>
-extern void symbol_file_command ();
-extern int stop_soon_quietly;          /* for wait_for_inferior */
-
-static int net_ptrace_clnt_call ();    /* Forward decl */
-static enum clnt_stat net_clnt_call ();        /* Forward decl */
-extern struct target_ops vx_ops, vx_run_ops;   /* Forward declaration */
-
-/* Saved name of target host and called function for "info files".
-   Both malloc'd.  */
-
-static char *vx_host;
-static char *vx_running;
-
-/* Nonzero means target that is being debugged remotely has a floating
-   point processor.  */
-
-static int target_has_fp;
-
-/* Default error message when the network is forking up.  */
-
-static const char rpcerr[] = "network target debugging:  rpc error";
-
-CLIENT *pClient;         /* client used in net debugging */
-static int ptraceSock = RPC_ANYSOCK;
-extern int errno;
-
-enum clnt_stat net_clnt_call();
-static void parse_args ();
-
-static struct timeval rpcTimeout = { 10, 0 };
-
-static char *skip_white_space ();
-static char *find_white_space ();
-/* Tell the VxWorks target system to download a file.
-   The load addresses of the text, data, and bss segments are
-   stored in pTextAddr, pDataAddr, and *pBssAddr (respectively).
-   Returns 0 for success, -1 for failure.  */
-
-static int
-net_load (filename, pTextAddr, pDataAddr, pBssAddr)
-    char *filename;
-    CORE_ADDR *pTextAddr;
-    CORE_ADDR *pDataAddr;
-    CORE_ADDR *pBssAddr;
-    {
-    enum clnt_stat status;
-    struct ldfile ldstruct;
-    struct timeval load_timeout;
-    bzero ((char *) &ldstruct, sizeof (ldstruct));
-
-    /* We invoke clnt_call () here directly, instead of through
-       net_clnt_call (), because we need to set a large timeout value.
-       The load on the target side can take quite a while, easily
-       more than 10 seconds.  The user can kill this call by typing
-       CTRL-C if there really is a problem with the load.  */
-
-    load_timeout.tv_sec = 0x7FFF7FFF;   /* A large number, effectively inf. */
-    load_timeout.tv_usec = 0;
-    status = clnt_call (pClient, VX_LOAD, xdr_wrapstring, &filename, xdr_ldfile,
-                       &ldstruct, load_timeout);
-
-    if (status == RPC_SUCCESS)
-      {
-        if (*ldstruct.name == NULL)    /* load failed on VxWorks side */
-          return -1;
-       *pTextAddr = ldstruct.txt_addr;
-       *pDataAddr = ldstruct.data_addr;
-       *pBssAddr = ldstruct.bss_addr;
-       return 0;
-      }
-    else
-        return -1;
-    }
-      
-/* returns 0 if successful, errno if RPC failed or VxWorks complains. */
-
-static int
-net_break (addr, procnum)
-    int addr;
-    u_long procnum;
-    {
-    enum clnt_stat status;
-    int break_status;
-    Rptrace ptrace_in;  /* XXX This is stupid.  It doesn't need to be a ptrace
-                           structure.  How about something smaller? */
-
-    bzero ((char *) &ptrace_in, sizeof (ptrace_in));
-    break_status = 0;
-
-    ptrace_in.addr = addr;
-    ptrace_in.pid = inferior_pid;
-
-    status = net_clnt_call (procnum, xdr_rptrace, &ptrace_in, xdr_int,
-                           &break_status);
-
-    if (status != RPC_SUCCESS)
-       return errno;
-
-    if (break_status == -1)
-      return ENOMEM;
-    return break_status;       /* probably (FIXME) zero */
-    }
-/* returns 0 if successful, errno otherwise */
-
-int
-vx_insert_breakpoint (addr)
-    int addr;
-    {
-    return net_break (addr, VX_BREAK_ADD);
-    }
-
-/* returns 0 if successful, errno otherwise */
-
-int
-vx_remove_breakpoint (addr)
-    int addr;
-    {
-    return net_break (addr, VX_BREAK_DELETE);
-    }
-
-/* Call a function on the VxWorks target system.
-   ARGS is a vector of values of arguments (NARGS of them).
-   FUNCTION is a value, the function to be called.
-   Returns a struct value * representing what the function returned.
-   May fail to return, if a breakpoint or signal is hit
-   during the execution of the function.  */
-
-#ifdef FIXME
-/* FIXME, function calls are really fried.  GO back to manual method. */
-value
-call_function (function, nargs, args)
-     value function;
-     int nargs;
-     value *args;
-{
-  register CORE_ADDR sp;
-  register int i;
-  CORE_ADDR start_sp;
-  static REGISTER_TYPE dummy[] = CALL_DUMMY;
-  REGISTER_TYPE dummy1[sizeof dummy / sizeof (REGISTER_TYPE)];
-  CORE_ADDR old_sp;
-  struct type *value_type;
-  unsigned char struct_return;
-  CORE_ADDR struct_addr;
-  struct inferior_status inf_status;
-  struct cleanup *old_chain;
-  CORE_ADDR funaddr;
-  int using_gcc;
-
-  save_inferior_status (&inf_status, 1);
-  old_chain = make_cleanup (restore_inferior_status, &inf_status);
-
-  /* PUSH_DUMMY_FRAME is responsible for saving the inferior registers
-     (and POP_FRAME for restoring them).  (At least on most machines)
-     they are saved on the stack in the inferior.  */
-  PUSH_DUMMY_FRAME;
-
-  old_sp = sp = read_register (SP_REGNUM);
-
-#if 1 INNER_THAN 2             /* Stack grows down */
-  sp -= sizeof dummy;
-  start_sp = sp;
-#else                          /* Stack grows up */
-  start_sp = sp;
-  sp += sizeof dummy;
-#endif
-
-  funaddr = find_function_addr (function, &value_type);
-
-  {
-    struct block *b = block_for_pc (funaddr);
-    /* If compiled without -g, assume GCC.  */
-    using_gcc = b == NULL || BLOCK_GCC_COMPILED (b);
-  }
-
-  /* Are we returning a value using a structure return or a normal
-     value return? */
-
-  struct_return = using_struct_return (function, funaddr, value_type,
-                                      using_gcc);
-
-  /* Create a call sequence customized for this function
-     and the number of arguments for it.  */
-  bcopy (dummy, dummy1, sizeof dummy);
-  FIX_CALL_DUMMY (dummy1, start_sp, funaddr, nargs, args,
-                 value_type, using_gcc);
-
-#if CALL_DUMMY_LOCATION == ON_STACK
-  write_memory (start_sp, dummy1, sizeof dummy);
-
-#else /* Not on stack.  */
-#if CALL_DUMMY_LOCATION == BEFORE_TEXT_END
-  /* Convex Unix prohibits executing in the stack segment. */
-  /* Hope there is empty room at the top of the text segment. */
-  {
-    static checked = 0;
-    if (!checked)
-      for (start_sp = text_end - sizeof dummy; start_sp < text_end; ++start_sp)
-       if (read_memory_integer (start_sp, 1) != 0)
-         error ("text segment full -- no place to put call");
-    checked = 1;
-    sp = old_sp;
-    start_sp = text_end - sizeof dummy;
-    write_memory (start_sp, dummy1, sizeof dummy);
-  }
-#else /* After text_end.  */
-  {
-    int errcode;
-    sp = old_sp;
-    start_sp = text_end;
-    errcode = target_write_memory (start_sp, dummy1, sizeof dummy);
-    if (errcode != 0)
-      error ("Cannot write text segment -- vx_call_function failed");
-  }
-#endif /* After text_end.  */
-#endif /* Not on stack.  */
-
-#ifdef STACK_ALIGN
-  /* If stack grows down, we must leave a hole at the top. */
-  {
-    int len = 0;
-
-    /* Reserve space for the return structure to be written on the
-       stack, if necessary */
-
-    if (struct_return)
-      len += TYPE_LENGTH (value_type);
-    
-    for (i = nargs - 1; i >= 0; i--)
-      len += TYPE_LENGTH (VALUE_TYPE (value_arg_coerce (args[i])));
-#ifdef CALL_DUMMY_STACK_ADJUST
-    len += CALL_DUMMY_STACK_ADJUST;
-#endif
-#if 1 INNER_THAN 2
-    sp -= STACK_ALIGN (len) - len;
-#else
-    sp += STACK_ALIGN (len) - len;
-#endif
-  }
-#endif /* STACK_ALIGN */
-
-    /* Reserve space for the return structure to be written on the
-       stack, if necessary */
-
-    if (struct_return)
-      {
-#if 1 INNER_THAN 2
-       sp -= TYPE_LENGTH (value_type);
-       struct_addr = sp;
-#else
-       struct_addr = sp;
-       sp += TYPE_LENGTH (value_type);
-#endif
-      }
-
-#if defined (REG_STRUCT_HAS_ADDR)
-  {
-    /* This is a machine like the sparc, where we need to pass a pointer
-       to the structure, not the structure itself.  */
-    if (REG_STRUCT_HAS_ADDR (using_gcc))
-      for (i = nargs - 1; i >= 0; i--)
-       if (   TYPE_CODE (VALUE_TYPE (args[i])) == TYPE_CODE_STRUCT
-           || TYPE_CODE (VALUE_TYPE (args[i])) == TYPE_CODE_UNION)
-         {
-           CORE_ADDR addr;
-#if !(1 INNER_THAN 2)
-           /* The stack grows up, so the address of the thing we push
-              is the stack pointer before we push it.  */
-           addr = sp;
-#endif
-           /* Push the structure.  */
-           sp = value_push (sp, args[i]);
-#if 1 INNER_THAN 2
-           /* The stack grows down, so the address of the thing we push
-              is the stack pointer after we push it.  */
-           addr = sp;
-#endif
-           /* The value we're going to pass is the address of the thing
-              we just pushed.  */
-           args[i] = value_from_long (builtin_type_long, (LONGEST) addr);
-         }
-  }
-#endif /* REG_STRUCT_HAS_ADDR.  */
-
-#ifdef PUSH_ARGUMENTS
-  PUSH_ARGUMENTS(nargs, args, sp, struct_return, struct_addr);
-#else /* !PUSH_ARGUMENTS */
-  for (i = nargs - 1; i >= 0; i--)
-    sp = value_arg_push (sp, args[i]);
-#endif /* !PUSH_ARGUMENTS */
-
-#ifdef CALL_DUMMY_STACK_ADJUST
-#if 1 INNER_THAN 2
-  sp -= CALL_DUMMY_STACK_ADJUST;
-#else
-  sp += CALL_DUMMY_STACK_ADJUST;
-#endif
-#endif /* CALL_DUMMY_STACK_ADJUST */
-
-  /* Store the address at which the structure is supposed to be
-     written.  Note that this (and the code which reserved the space
-     above) assumes that gcc was used to compile this function.  Since
-     it doesn't cost us anything but space and if the function is pcc
-     it will ignore this value, we will make that assumption.
-
-     Also note that on some machines (like the sparc) pcc uses a 
-     convention like gcc's.  */
-
-  if (struct_return)
-    STORE_STRUCT_RETURN (struct_addr, sp);
-
-  /* Write the stack pointer.  This is here because the statements above
-     might fool with it.  On SPARC, this write also stores the register
-     window into the right place in the new stack frame, which otherwise
-     wouldn't happen.  (See write_inferior_registers in sparc-xdep.c.)  */
-  write_register (SP_REGNUM, sp);
-
-  /* Figure out the value returned by the function.  */
-  {
-    char retbuf[REGISTER_BYTES];
-
-    /* Execute the stack dummy routine, calling FUNCTION.
-       When it is done, discard the empty frame
-       after storing the contents of all regs into retbuf.  */
-    run_stack_dummy (start_sp + CALL_DUMMY_START_OFFSET, retbuf);
-
-    do_cleanups (old_chain);
-
-    return value_being_returned (value_type, retbuf, struct_return);
-  }
-}
-/* should return a value of some sort */
-value
-vx_call_function (funcAddr, nargs, args, valueType)
-    char *funcAddr;
-    int nargs;
-    value *args;
-    struct type * valueType;
-{
-    int i;
-    func_call funcInfo;
-    arg_value *argValue;
-    enum clnt_stat status;
-    register int len;
-    arg_value funcReturn;
-    value gdbValue;
-
-    argValue = (arg_value *) xmalloc (nargs * sizeof (arg_value));
-
-    bzero (argValue, nargs * sizeof (arg_value));
-    bzero (&funcReturn, sizeof (funcReturn));
-
-    for (i = nargs - 1; i >= 0; i--)
-       {
-       len = TYPE_LENGTH (VALUE_TYPE (args [i]));
-
-       switch (TYPE_CODE (VALUE_TYPE (args[i])))
-           {
-           /* XXX put other types here.  Where's CHAR, etc??? */
-
-           case TYPE_CODE_FLT:
-               argValue[i].type = T_FLOAT;
-               break;
-           case TYPE_CODE_INT:
-           case TYPE_CODE_PTR:
-           case TYPE_CODE_ENUM:
-           case TYPE_CODE_FUNC:
-               argValue[i].type = T_INT;
-               break;
-
-           case TYPE_CODE_UNDEF:
-           case TYPE_CODE_ARRAY:
-           case TYPE_CODE_STRUCT:
-           case TYPE_CODE_UNION:
-           case TYPE_CODE_VOID:
-           case TYPE_CODE_SET:
-           case TYPE_CODE_RANGE:
-           case TYPE_CODE_PASCAL_ARRAY:
-           case TYPE_CODE_MEMBER:          /* C++ */
-           case TYPE_CODE_METHOD:          /* C++ */
-           case TYPE_CODE_REF:             /* C++ */
-           default:
-               error ("No corresponding VxWorks type for %d.  CHECK IT OUT!!!\n",
-                       TYPE_CODE(VALUE_TYPE(args[i])));
-           } /* switch */
-       if (TYPE_CODE(VALUE_TYPE(args[i])) == TYPE_CODE_FUNC)
-           argValue[i].arg_value_u.v_int = VALUE_ADDRESS(args[i]);
-       else
-           bcopy (VALUE_CONTENTS (args[i]), (char *) &argValue[i].arg_value_u,
-                  len);
-       }
-
-    /* XXX what should the type of this function addr be?
-     * XXX Both in gdb and vxWorks
-     */
-    funcInfo.func_addr = (int) funcAddr;
-    funcInfo.args.args_len = nargs;
-    funcInfo.args.args_val = argValue;
-
-    status = net_clnt_call (VX_CALL_FUNC, xdr_func_call, (char *) &funcInfo,
-                           xdr_arg_value, &funcReturn);
-
-    free ((char *) argValue);
-
-    if (status == RPC_SUCCESS)
-       {
-       /* XXX this assumes that vxWorks ALWAYS returns an int, and that
-        * XXX gdb isn't expecting anything more
-        */
-
-       /*******************
-       if (funcReturn.type == T_UNKNOWN)
-           return YYYXXX...;
-       *******************/
-       gdbValue = allocate_value (valueType);
-       bcopy (&funcReturn.arg_value_u.v_int, VALUE_CONTENTS (gdbValue),
-               sizeof (int));
-        return gdbValue;
-       }
-    else 
-       error (rpcerr);
-    }
-#endif /* FIXME */
-/* Start an inferior process and sets inferior_pid to its pid.
-   EXEC_FILE is the file to run.
-   ALLARGS is a string containing the arguments to the program.
-   ENV is the environment vector to pass.
-   Returns process id.  Errors reported with error().
-   On VxWorks, we ignore exec_file.  */
-void
-vx_create_inferior (exec_file, args, env)
-     char *exec_file;
-     char *args;
-     char **env;
-{
-  enum clnt_stat status;
-  arg_array passArgs;
-  TASK_START taskStart;
-
-  bzero ((char *) &passArgs, sizeof (passArgs));
-  bzero ((char *) &taskStart, sizeof (taskStart));
-
-  /* parse arguments, put them in passArgs */
-
-  parse_args (args, &passArgs);
-
-  if (passArgs.arg_array_len == 0)
-    error ("You must specify a function name to run, and arguments if any");
-
-  status = net_clnt_call (PROCESS_START, xdr_arg_array, &passArgs,
-                         xdr_TASK_START, &taskStart);
-
-  if ((status != RPC_SUCCESS) || (taskStart.status == -1))
-    error ("Can't create process on remote target machine");
-
-  /* Save the name of the running function */
-  if (vx_running)
-    free (vx_running);
-  vx_running = savestring (passArgs.arg_array_val[0],
-                          strlen (passArgs.arg_array_val[0]));
-
-#ifdef CREATE_INFERIOR_HOOK
-  CREATE_INFERIOR_HOOK (pid);
-#endif  
-
-  push_target (&vx_run_ops);
-  inferior_pid = taskStart.pid;
-
-#if defined (START_INFERIOR_HOOK)
-  START_INFERIOR_HOOK ();
-#endif
-
-  /* We will get a trace trap after one instruction.
-     Insert breakpoints and continue.  */
-
-  init_wait_for_inferior ();
-
-  /* Set up the "saved terminal modes" of the inferior
-     based on what modes we are starting it with.  */
-  target_terminal_init ();
-
-  /* Install inferior's terminal modes.  */
-  target_terminal_inferior ();
-
-  /* remote_start(args); */
-  /* trap_expected = 0; */
-  stop_soon_quietly = 1;
-  wait_for_inferior ();                /* Get the task spawn event */
-  stop_soon_quietly = 0;
-
-  /* insert_step_breakpoint ();  FIXME, do we need this?  */
-  proceed(-1, -1, 0);
-}
-
-/* Fill ARGSTRUCT in argc/argv form with the arguments from the
-   argument string ARGSTRING.  */
-
-static void
-parse_args (arg_string, arg_struct)
-     register char *arg_string;
-     arg_array *arg_struct;
-{
-  register int arg_count = 0;  /* number of arguments */
-  register int arg_index = 0;
-  register char *p0;
-  bzero ((char *) arg_struct, sizeof (arg_array));
-  /* first count how many arguments there are */
-
-  p0 = arg_string;
-  while (*p0 != '\0')
-    {
-      if (*(p0 = skip_white_space (p0)) == '\0')
-       break;
-      p0 = find_white_space (p0);
-      arg_count++;
-    }
-
-  arg_struct->arg_array_len = arg_count;
-  arg_struct->arg_array_val = (char **) xmalloc ((arg_count + 1)
-                                                * sizeof (char *));
-
-  /* now copy argument strings into arg_struct.  */
-
-  while (*(arg_string = skip_white_space (arg_string)))
-    {
-      p0 = find_white_space (arg_string);
-      arg_struct->arg_array_val[arg_index++] = savestring (arg_string,
-                                                          p0 - arg_string);
-      arg_string = p0;
-    }
-
-  arg_struct->arg_array_val[arg_count] = NULL;
-}
-
-/* Advance a string pointer across whitespace and return a pointer
-   to the first non-white character.  */
-
-static char *
-skip_white_space (p)
-     register char *p;
-{
-  while (*p == ' ' || *p == '\t')
-    p++;
-  return p;
-}
-    
-/* Search for the first unquoted whitespace character in a string.
-   Returns a pointer to the character, or to the null terminator
-   if no whitespace is found.  */
-
-static char *
-find_white_space (p)
-     register char *p;
-{
-  register int c;
-
-  while ((c = *p) != ' ' && c != '\t' && c)
-    {
-      if (c == '\'' || c == '"')
-       {
-         while (*++p != c && *p)
-           {
-             if (*p == '\\')
-               p++;
-           }
-         if (!*p)
-           break;
-       }
-      p++;
-    }
-  return p;
-}
-    
-/* Poll the VxWorks target system for an event related
-   to the debugged task.
-   Returns -1 if remote wait failed, task status otherwise.  */
-
-int
-net_wait (pEvent)
-    RDB_EVENT *pEvent;
-{
-    int pid;
-    enum clnt_stat status;
-
-    bzero ((char *) pEvent, sizeof (RDB_EVENT));
-
-    pid = inferior_pid;
-    status = net_clnt_call (PROCESS_WAIT, xdr_int, &pid, xdr_RDB_EVENT, pEvent);
-
-    return (status == RPC_SUCCESS)? pEvent->status: -1;
-}
-    
-/* Suspend the remote task.
-   Returns -1 if suspend fails on target system, 0 otherwise.  */
-
-int
-net_quit ()
-{
-    int pid;
-    int quit_status;
-    enum clnt_stat status;
-
-    quit_status = 0;
-
-    /* don't let rdbTask suspend itself by passing a pid of 0 */
-
-    if ((pid = inferior_pid) == 0)
-       return -1;
-
-    status = net_clnt_call (VX_TASK_SUSPEND, xdr_int, &pid, xdr_int,
-                           &quit_status);
-
-    return (status == RPC_SUCCESS)? quit_status: -1;
-}
-
-/* Read a register or registers from the remote system.  */
-
-int
-vx_read_register (regno)
-     int regno;
-{
-  int status;
-  Rptrace ptrace_in;
-  Ptrace_return ptrace_out;
-  struct regs inferior_registers;
-  struct fp_status inferior_fp_registers;
-  extern char registers[];
-
-  bzero ((char *) &ptrace_in, sizeof (ptrace_in));
-  bzero ((char *) &ptrace_out, sizeof (ptrace_out));
-
-  /* FIXME, eventually only get the ones we need.  */
-  registers_fetched ();
-  
-  ptrace_in.pid = inferior_pid;
-  ptrace_out.info.more_data = (caddr_t) &inferior_registers;
-  status = net_ptrace_clnt_call (PTRACE_GETREGS, &ptrace_in, &ptrace_out);
-  if (status)
-    error (rpcerr);
-  if (ptrace_out.status == -1)
-    {
-      errno = ptrace_out.errno;
-      return -1;
-    }
-  
-#ifdef I80960
-#else  /* I80960 */
-  bcopy (&inferior_registers, registers, 16 * 4);
-  *(int *)&registers[REGISTER_BYTE (PS_REGNUM)] = inferior_registers.r_ps;
-  *(int *)&registers[REGISTER_BYTE (PC_REGNUM)] = inferior_registers.r_pc;
-
-  if (target_has_fp)
-    {
-      ptrace_in.pid = inferior_pid;
-      ptrace_out.info.more_data = (caddr_t) &inferior_fp_registers;
-      status = net_ptrace_clnt_call (PTRACE_GETFPREGS, &ptrace_in, &ptrace_out);
-      if (status)
-       error (rpcerr);
-      if (ptrace_out.status == -1)
-       {
-         errno = ptrace_out.errno;
-         return -1;
-       }
-      
-      bcopy (&inferior_fp_registers, &registers[REGISTER_BYTE (FP0_REGNUM)],
-            sizeof inferior_fp_registers.fps_regs);
-      bcopy (&inferior_fp_registers.fps_control,
-        &registers[REGISTER_BYTE (FPC_REGNUM)],
-        sizeof inferior_fp_registers - sizeof inferior_fp_registers.fps_regs);
-    }
-  else
-    {
-      bzero (&registers[REGISTER_BYTE (FP0_REGNUM)],
-            sizeof inferior_fp_registers.fps_regs);
-      bzero (&registers[REGISTER_BYTE (FPC_REGNUM)],
-        sizeof inferior_fp_registers - sizeof inferior_fp_registers.fps_regs);
-    }
-#endif
-  return 0;
-}
-
-/* Prepare to store registers.  Since we will store all of them,
-   read out their current values now.  */
-
-void
-vx_prepare_to_store ()
-{
-  vx_read_register (-1);
-}
-
-
-/* Store our register values back into the inferior.
-   If REGNO is -1, do this for all registers.
-   Otherwise, REGNO specifies which register (so we can save time).  */
-   /* FIXME, look at REGNO to save time here */
-
-vx_write_register (regno)
-     int regno;
-{
-  struct regs inferior_registers;
-  struct fp_status inferior_fp_registers;
-  extern char registers[];
-  int status;
-  Rptrace ptrace_in;
-  Ptrace_return ptrace_out;
-
-  bzero ((char *) &ptrace_in, sizeof (ptrace_in));
-  bzero ((char *) &ptrace_out, sizeof (ptrace_out));
-
-  bcopy (registers, &inferior_registers, 16 * 4);
-  inferior_registers.r_ps = *(int *)&registers[REGISTER_BYTE (PS_REGNUM)];
-  inferior_registers.r_pc = *(int *)&registers[REGISTER_BYTE (PC_REGNUM)];
-  ptrace_in.pid = inferior_pid;
-  ptrace_in.info.ttype     = REGS;
-  ptrace_in.info.more_data = (caddr_t) &inferior_registers;
-
-  /* XXX change second param to be a proc number */
-  status = net_ptrace_clnt_call (PTRACE_SETREGS, &ptrace_in, &ptrace_out);
-  if (status)
-      error (rpcerr);
-  if (ptrace_out.status == -1)
-    {
-      errno = ptrace_out.errno;
-      return -1;
-    }
-
-  if (target_has_fp)
-    {
-      bcopy (&registers[REGISTER_BYTE (FP0_REGNUM)], &inferior_fp_registers,
-            sizeof inferior_fp_registers.fps_regs);
-      bcopy (&registers[REGISTER_BYTE (FPC_REGNUM)],
-        &inferior_fp_registers.fps_control,
-         sizeof inferior_fp_registers - sizeof inferior_fp_registers.fps_regs);
-
-      ptrace_in.pid = inferior_pid;
-      ptrace_in.info.ttype     = FPREGS;
-      ptrace_in.info.more_data = (caddr_t) &inferior_fp_registers;
-
-      status = net_ptrace_clnt_call (PTRACE_SETFPREGS, &ptrace_in, &ptrace_out);
-      if (status)
-         error (rpcerr);
-      if (ptrace_out.status == -1)
-       {
-         errno = ptrace_out.errno;
-         return -1;
-       }
-    }
-  return 0;
-}
-
-/* Copy LEN bytes to or from remote inferior's memory starting at MEMADDR
-   to debugger memory starting at MYADDR.  WRITE is true if writing to the
-   inferior.
-   Result is the number of bytes written or read (zero if error).  The
-   protocol allows us to return a negative count, indicating that we can't
-   handle the current address but can handle one N bytes further, but
-   vxworks doesn't give us that information.  */
-
-int
-vx_xfer_memory (memaddr, myaddr, len, write)
-     CORE_ADDR memaddr;
-     char *myaddr;
-     int len;
-{
-  int status;
-  Rptrace ptrace_in;
-  Ptrace_return ptrace_out;
-  C_bytes data;
-
-  bzero ((char *) &ptrace_in, sizeof (ptrace_in));
-  bzero ((char *) &ptrace_out, sizeof (ptrace_out));
-
-  ptrace_in.pid = inferior_pid;                /* XXX pid unnecessary for READDATA */
-  ptrace_in.addr = (int) memaddr;      /* Where from */
-  ptrace_in.data = len;                        /* How many bytes */
-
-  if (write)
-    {
-      ptrace_in.info.ttype     = DATA;
-      ptrace_in.info.more_data = (caddr_t) &data;
-
-      data.bytes = (caddr_t) myaddr;   /* Where from */
-      data.len   = len;                        /* How many bytes (again, for XDR) */
-
-      /* XXX change second param to be a proc number */
-      status = net_ptrace_clnt_call (PTRACE_WRITEDATA, &ptrace_in, &ptrace_out);
-    }
-  else
-    {
-      ptrace_out.info.more_data = (caddr_t) &data;
-      data.bytes = myaddr;             /* Where to */
-      data.len   = len;                        /* How many (again, for XDR) */
-
-      /* XXX change second param to be a proc number */
-      status = net_ptrace_clnt_call (PTRACE_READDATA, &ptrace_in, &ptrace_out);
-    }
-
-  if (status)
-      error (rpcerr);
-  if (ptrace_out.status == -1)
-    {
-      return 0;                /* No bytes moved */
-    }
-  return len;          /* Moved *all* the bytes */
-}
-
-void
-vx_files_info ()
-{
-  printf ("\tAttached to host `%s'", vx_host);
-  printf (", which has %sfloating point", target_has_fp? "": "no ");
-  printf (".\n");
-}
-
-void
-vx_run_files_info ()
-{
-  printf ("\tRunning VxWorks process 0x%x, function `%s'.\n",
-         inferior_pid, vx_running);
-}
-
-void
-vx_resume (step, siggnal)
-     int step;
-     int siggnal;
-{
-  int status;
-  Rptrace ptrace_in;
-  Ptrace_return ptrace_out;
-
-  if (siggnal != 0)
-    error ("Cannot send signals to VxWorks processes");
-
-  bzero ((char *) &ptrace_in, sizeof (ptrace_in));
-  bzero ((char *) &ptrace_out, sizeof (ptrace_out));
-
-  ptrace_in.pid = inferior_pid;
-  ptrace_in.addr = 1;  /* Target side insists on this, or it panics.  */
-
-  /* XXX change second param to be a proc number */
-  status = net_ptrace_clnt_call (step? PTRACE_SINGLESTEP: PTRACE_CONT,
-                                &ptrace_in, &ptrace_out);
-  if (status)
-      error (rpcerr);
-  if (ptrace_out.status == -1)
-    {
-      errno = ptrace_out.errno;
-      perror_with_name ("Resuming remote process");
-    }
-}
-
-void
-vx_mourn_inferior ()
-{
-  pop_target ();               /* Pop back to no-child state */
-  generic_mourn_inferior ();
-}
-
-\f
-/* This function allows the addition of incrementally linked object files.  */
-
-void
-vx_add_file_command (arg_string, from_tty)
-     char* arg_string;
-     int from_tty;
-{
-  CORE_ADDR text_addr;
-  CORE_ADDR data_addr;
-  CORE_ADDR bss_addr;
-  
-  if (arg_string == 0)
-    error ("add-file takes a file name in VxWorks");
-
-  arg_string = tilde_expand (arg_string);
-  make_cleanup (free, arg_string);
-
-  dont_repeat ();
-
-  if (net_load (arg_string, &text_addr, &data_addr, &bss_addr) == -1)
-    error ("Load failed on target machine");
-
-  /* FIXME, for now we ignore data_addr and bss_addr.  */
-  symbol_file_add (arg_string, from_tty, text_addr, 0);
-}
-
-#ifdef FIXME  /* Not ready for prime time */
-/* Single step the target program at the source or machine level.
-   Takes an error exit if rpc fails.
-   Returns -1 if remote single-step operation fails, else 0.  */
-
-static int
-net_step ()
-{
-  enum clnt_stat status;
-  int step_status;
-  SOURCE_STEP source_step;
-
-  source_step.taskId = inferior_pid;
-
-  if (step_range_end)
-    {
-      source_step.startAddr = step_range_start;
-      source_step.endAddr = step_range_end;
-    }
-  else
-    {
-      source_step.startAddr = 0;
-      source_step.endAddr = 0;
-    }
-
-  status = net_clnt_call (VX_SOURCE_STEP, xdr_SOURCE_STEP, &source_step,
-                         xdr_int, &step_status);
-
-  if (status == RPC_SUCCESS)
-    return step_status;
-  else 
-    error (rpcerr);
-}
-#endif
-
-/* Emulate ptrace using RPC calls to the VxWorks target system.
-   Returns nonzero (-1) if RPC status to VxWorks is bad, 0 otherwise.  */
-
-static int
-net_ptrace_clnt_call (request, pPtraceIn, pPtraceOut)
-    enum ptracereq request;
-    Rptrace *pPtraceIn;
-    Ptrace_return *pPtraceOut;
-{
-  enum clnt_stat status;
-
-  status = net_clnt_call (request, xdr_rptrace, pPtraceIn, xdr_ptrace_return,
-                         pPtraceOut);
-
-  if (status != RPC_SUCCESS)
-      return -1;
-
-  return 0;
-}
-
-/* Query the target for the name of the file from which VxWorks was
-   booted.  pBootFile is the address of a pointer to the buffer to
-   receive the file name; if the pointer pointed to by pBootFile is 
-   NULL, memory for the buffer will be allocated by XDR.
-   Returns -1 if rpc failed, 0 otherwise.  */
-
-int
-net_get_boot_file (pBootFile)
-     char **pBootFile;
-{
-  enum clnt_stat status;
-
-  status = net_clnt_call (VX_BOOT_FILE_INQ, xdr_void, (char *) 0,
-                         xdr_wrapstring, pBootFile);
-  return (status == RPC_SUCCESS) ? 0 : -1;
-}
-
-/* Fetch a list of loaded object modules from the VxWorks target.
-   Returns -1 if rpc failed, 0 otherwise
-   There's no way to check if the returned loadTable is correct.
-   VxWorks doesn't check it.  */
-
-int
-net_get_symbols (pLoadTable)
-     ldtabl *pLoadTable;               /* return pointer to ldtabl here */
-{
-  enum clnt_stat status;
-
-  bzero ((char *) pLoadTable, sizeof (struct ldtabl));
-
-  status = net_clnt_call (VX_STATE_INQ, xdr_void, 0, xdr_ldtabl, pLoadTable);
-  return (status == RPC_SUCCESS) ? 0 : -1;
-}
-
-/* Look up a symbol in the VxWorks target's symbol table.
-   Returns status of symbol read on target side (0=success, -1=fail)
-   Returns -1 and complain()s if rpc fails.  */
-
-struct complaint cant_contact_target =
-  {"Lost contact with VxWorks target", 0, 0};
-
-int
-vx_lookup_symbol (name, pAddr)
-     char *name;               /* symbol name */
-     CORE_ADDR *pAddr;
-{
-  enum clnt_stat status;
-  SYMBOL_ADDR symbolAddr;
-
-  *pAddr = 0;
-  bzero ((char *) &symbolAddr, sizeof (symbolAddr));
-
-  status = net_clnt_call (VX_SYMBOL_INQ, xdr_wrapstring, &name,
-                         xdr_SYMBOL_ADDR, &symbolAddr);
-  if (status != RPC_SUCCESS) {
-      complain (&cant_contact_target, 0);
-      return -1;
-  }
-
-  *pAddr = symbolAddr.addr;
-  return symbolAddr.status;
-}
-
-/* Check to see if the VxWorks target has a floating point coprocessor.
-   Returns 1 if target has floating point processor, 0 otherwise.
-   Calls error() if rpc fails.  */
-
-int
-net_check_for_fp ()
-{
-  enum clnt_stat status;
-  bool_t fp = 0;       /* true if fp processor is present on target board */
-
-  status = net_clnt_call (VX_FP_INQUIRE, xdr_void, 0, xdr_bool, &fp);
-  if (status != RPC_SUCCESS)
-      error (rpcerr);
-
-   return (int) fp;
-}
-
-/* Establish an RPC connection with the VxWorks target system.
-   Calls error () if unable to establish connection.  */
-
-void
-net_connect (host)
-     char *host;
-{
-  struct sockaddr_in destAddr;
-  struct hostent *destHost;
-
-  /* get the internet address for the given host */
-
-  if ((destHost = (struct hostent *) gethostbyname (host)) == NULL)
-      error ("Invalid hostname.  Couldn't attach remote target.");
-
-  bzero (&destAddr, sizeof (destAddr));
-
-  destAddr.sin_addr.s_addr = * (u_long *) destHost->h_addr;
-  destAddr.sin_family      = AF_INET;
-  destAddr.sin_port        = 0;        /* set to actual port that remote
-                                  ptrace is listening on.  */
-
-  /* Create a tcp client transport on which to issue
-     calls to the remote ptrace server.  */
-
-  ptraceSock = RPC_ANYSOCK;
-  pClient = clnttcp_create (&destAddr, RDBPROG, RDBVERS, &ptraceSock, 0, 0);
-  /* FIXME, here is where we deal with different version numbers of the proto */
-  
-  if (pClient == NULL)
-    {
-      clnt_pcreateerror ("\tnet_connect");
-      error ("Couldn't connect to remote target.");
-    }
-}
-\f
-/* Sleep for the specified number of milliseconds 
- * (assumed to be less than 1000).
- * If select () is interrupted, returns immediately;
- * takes an error exit if select () fails for some other reason.
- */
-
-static void
-sleep_ms (ms)
-     long ms;
-{
-  struct timeval select_timeout;
-  int status;
-
-  select_timeout.tv_sec = 0;
-  select_timeout.tv_usec = ms * 1000;
-
-  status = select (0, (fd_set *) 0, (fd_set *) 0, (fd_set *) 0, &select_timeout);
-
-  if (status < 0 && errno != EINTR)
-    perror_with_name ("select");
-}
-
-/* Wait for control to return from inferior to debugger.
-   If inferior gets a signal, we may decide to start it up again
-   instead of returning.  That is why there is a loop in this function.
-   When this function actually returns it means the inferior
-   should be left stopped and GDB should read more commands.  */
-
-/* For network debugging with VxWorks.
- * VxWorks knows when tasks hit breakpoints, receive signals, exit, etc,
- * so vx_wait() receives this information directly from
- * VxWorks instead of trying to figure out what happenned via a wait() call.
- */
-
-static int
-vx_wait (status)
-     int *status;
-{
-  register int pid;
-  WAITTYPE w;
-  RDB_EVENT rdbEvent;
-  int quit_failed;
-
-  do
-    {
-      /* If CTRL-C is hit during this loop,
-        suspend the inferior process.  */
-
-      quit_failed = 0;
-      if (quit_flag)
-       {
-         quit_failed = (net_quit () == -1);
-         quit_flag = 0;
-       }
-
-      /* If a net_quit () or net_wait () call has failed,
-        allow the user to break the connection with the target.
-        We can't simply error () out of this loop, since the 
-        data structures representing the state of the inferior
-        are in an inconsistent state.  */
-
-      if (quit_failed || net_wait (&rdbEvent) == -1)
-       {
-         terminal_ours ();
-         if (query ("Can't %s.  Disconnect from target system? ",
-                    (quit_failed) ? "suspend remote task"
-                                  : "get status of remote task"))
-           {
-             target_mourn_inferior();
-             error ("Use the \"target\" command to reconnect.");
-           }
-         else
-           {
-             terminal_inferior ();
-             continue;
-           }
-       }
-      
-
-      if (quit_failed || net_wait (&rdbEvent) == -1)
-       {
-         error ("Wait on remote target failed");
-       }
-      
-      pid = rdbEvent.taskId;
-      if (pid == 0)
-       {
-         sleep_ms (200);       /* FIXME Don't kill the network too badly */
-       }
-      else if (pid != inferior_pid)
-       fatal ("Bad pid for debugged task: 0x%x\n", pid);
-    } while (pid == 0);
-
-  /* FIXME, eventually do more then SIGTRAP on everything...  */
-  switch (rdbEvent.eventType)
-    {
-    case EVENT_EXIT:
-      WSETEXIT (w, 0);
-      /* FIXME is it possible to distinguish between a
-        XXX   normal vs abnormal exit in VxWorks? */
-      break;
-
-    case EVENT_START:
-      WSETSTOP (w, SIGTRAP);
-      break;
-
-    case EVENT_STOP:
-      WSETSTOP (w, SIGTRAP);
-      /* XXX was it stopped by a signal?  act accordingly */
-      break;
-
-    case EVENT_BREAK:
-       /* Expecting a trace trap.  Stop the inferior and
-        * return silently when it happens.  */
-      WSETSTOP (w, SIGTRAP);
-      break;
-
-    case EVENT_SUSPEND:
-      target_terminal_ours_for_output ();
-      printf ("\nRemote task suspended\n");  /* FIXME */
-      fflush (stdout);
-      WSETSTOP (w, SIGTRAP);
-      break;
-
-    case EVENT_SIGNAL:
-      /* The target is not running Unix, and its
-        faults/traces do not map nicely into Unix signals.
-        Make sure they do not get confused with Unix signals
-        by numbering them with values higher than the highest
-        legal Unix signal.  code in the arch-dependent PRINT_RANDOM_SIGNAL
-        routine will interpret the value for wait_for_inferior.  */
-      WSETSTOP (w, rdbEvent.sigType + NSIG);
-      break;
-    } /* switch */
-  *status = *(int *)&w;                /* Grumble union wait crap Grumble */
-  return pid;
-}
-\f
-static int
-symbol_stub (arg)
-     int arg;
-{
-  char *bootFile = (char *)arg;
-  symbol_file_command (bootFile, 0);
-  return 1;
-}
-
-static int
-add_symbol_stub (arg)
-     int arg;
-{
-  struct ldfile *pLoadFile = (struct ldfile *)arg;
-
-  symbol_file_add (pLoadFile->name, 0, pLoadFile->txt_addr, 0);
-  return 1;
-}
-/* Target command for VxWorks target systems.
-
-   Used in vxgdb.  Takes the name of a remote target machine
-   running vxWorks and connects to it to initialize remote network
-   debugging.  */
-
-static void
-vx_open (args, from_tty)
-     char *args;
-     int from_tty;
-{
-  extern int close ();
-  char *bootFile;
-  extern char *source_path;
-  struct ldtabl loadTable;
-  struct ldfile *pLoadFile;
-  int i;
-  extern CLIENT *pClient;
-
-  if (!args)
-    error_no_arg ("target machine name");
-
-  target_preopen ();
-  
-  printf ("Attaching remote machine across net...\n");
-  fflush (stdout);
-
-  /* Allow the user to kill the connect attempt by typing ^C.
-     Wait until the call to target_has_fp () completes before
-     disallowing an immediate quit, since even if net_connect ()
-     is successful, the remote debug server might be hung.  */
-
-  immediate_quit++;
-
-  net_connect (args);
-  target_has_fp = net_check_for_fp ();
-  printf_filtered ("Connected to %s\n", args);
-
-  immediate_quit--;
-
-  push_target (&vx_ops);
-
-  /* Save a copy of the target host's name.  */
-  if (vx_host)
-    free (vx_host);
-  vx_host = savestring (args, strlen (args));
-
-  /* Find out the name of the file from which the target was booted
-     and load its symbol table.  */
-
-  bootFile = NULL;
-  if (!net_get_boot_file (&bootFile))
-    {
-      if (*bootFile) {
-       printf_filtered ("%s: ", bootFile);
-       if (catch_errors (symbol_stub, (int)bootFile,
-               "Error reading symbols from boot file"))
-         puts_filtered ("ok\n");
-      } else if (from_tty)
-       printf ("VxWorks kernel symbols not loaded.\n");
-    }
-  else
-    error ("Can't retrieve boot file name from target machine.");
-
-  clnt_freeres (pClient, xdr_wrapstring, &bootFile);
-
-  if (net_get_symbols (&loadTable) != 0)
-    error ("Can't read loaded modules from target machine");
-
-  i = 0-1;
-  while (++i < loadTable.tbl_size)
-    {
-    QUIT;      /* FIXME, avoids clnt_freeres below:  mem leak */
-    pLoadFile = &loadTable.tbl_ent [i];
-#ifdef WRS_ORIG
-  {
-    register int desc;
-    struct cleanup *old_chain;
-    char *fullname = NULL;
-
-    desc = openp (source_path, 0, pLoadFile->name, O_RDONLY, 0, &fullname);
-    if (desc < 0)
-       perror_with_name (pLoadFile->name);
-    old_chain = make_cleanup (close, desc);
-    add_file_at_addr (fullname, desc, pLoadFile->txt_addr, pLoadFile->data_addr,
-                     pLoadFile->bss_addr);
-    do_cleanups (old_chain);
-  }
-#else
-    /* Botches, FIXME:
-       (1)  Searches the PATH, not the source path.
-       (2)  data and bss are assumed to be at the usual offsets from text.  */
-    catch_errors (add_symbol_stub, (int)pLoadFile,
-       "Error in reading symbols from loaded module.");
-#endif
-    }
-
-  clnt_freeres (pClient, xdr_ldtabl, &loadTable);
-
-  if (from_tty)
-    {
-      puts_filtered ("Success!\n");
-    }
-}
-\f
-/* Cross-net conversion of floats to and from extended form.
-   (This is needed because different target machines have different
-    extended floating point formats.)  */
-
-/* Convert from an extended float to a double.
-
-   The extended float is stored as raw data pointed to by FROM.
-   Return the converted value as raw data in the double pointed to by TO.
-*/
-
-static void
-vx_convert_to_virtual (regno, from, to)
-    int regno;
-    char *from;
-    char *to;
-{
-  enum clnt_stat status;
-  ext_fp from_ext_fp;
-  double to_double;
-
-  if (REGISTER_CONVERTIBLE (regno)) 
-    {
-      if (!target_has_fp) {
-       *(double *)to = 0.0;    /* Skip the trouble if no float anyway */
-       return;
-      }
-      bcopy (from, (char *) &from_ext_fp, sizeof (from_ext_fp));
-      bzero ((char *) &to_double, sizeof (to_double));
-
-      status = net_clnt_call (VX_CONV_FROM_68881, xdr_ext_fp, &from_ext_fp,
-                             xdr_double, &to_double);
-      if (status == RPC_SUCCESS)
-         bcopy ((char *) &to_double, to, sizeof (to_double));
-      else
-         error (rpcerr);
-    }
-  else
-    bcopy (from, to, REGISTER_VIRTUAL_SIZE (regno));
-}
-
-
-/* The converse:  convert from a double to an extended float.
-
-   The double is stored as raw data pointed to by FROM.
-   Return the converted value as raw data in the extended
-   float pointed to by TO.
-*/
-
-static void
-vx_convert_from_virtual (regno, from, to)
-    int regno;
-    char *from;
-    char *to;
-{
-  enum clnt_stat status;
-  ext_fp to_ext_fp;
-  double from_double;
-
-  if (REGISTER_CONVERTIBLE (regno)) 
-    {
-      if (!target_has_fp) {
-       bzero (to, REGISTER_RAW_SIZE (FP0_REGNUM));     /* Shrug */
-       return;
-      }
-      bcopy (from, (char *) &from_double, sizeof (from_double));
-      bzero ((char *) &to_ext_fp, sizeof (to_ext_fp));
-
-      status = net_clnt_call (VX_CONV_TO_68881, xdr_double, &from_double,
-                             xdr_ext_fp, &to_ext_fp);
-      if (status == RPC_SUCCESS)
-         bcopy ((char *) &to_ext_fp, to, sizeof (to_ext_fp));
-      else
-         error (rpcerr);
-    }
-  else
-    bcopy (from, to, REGISTER_VIRTUAL_SIZE (regno));
-}
-\f
-/* Make an RPC call to the VxWorks target.
-   Returns RPC status.  */
-
-static enum clnt_stat
-net_clnt_call (procNum, inProc, in, outProc, out)
-    enum ptracereq procNum;
-    xdrproc_t inProc;
-    char *in;
-    xdrproc_t outProc;
-    char *out;
-{
-  enum clnt_stat status;
-  
-  status = clnt_call (pClient, procNum, inProc, in, outProc, out, rpcTimeout);
-
-  if (status != RPC_SUCCESS)
-      clnt_perrno (status);
-
-  return status;
-}
-
-/* A vxprocess target should be started via "run" not "target".  */
-/*ARGSUSED*/
-static void
-vx_proc_open (name, from_tty)
-     char *name;
-     int from_tty;
-{
-  error ("Use the \"run\" command to start a VxWorks process.");
-}
-
-
-/* Target ops structure for accessing memory and such over the net */
-
-struct target_ops vx_ops = {
-       "vxworks", "VxWorks target memory via RPC over TCP/IP",
-       "Use VxWorks target memory.  \n\
-Specify the name of the machine to connect to.",
-       vx_open, 0, /* vx_detach, */
-       0, 0, /* resume, wait */
-       0, 0, /* read_reg, write_reg */
-       0, vx_convert_to_virtual, vx_convert_from_virtual,  /* prep_to_store, */
-       vx_xfer_memory, vx_files_info,
-       0, 0, /* insert_breakpoint, remove_breakpoint */
-       0, 0, 0, 0, 0,  /* terminal stuff */
-       0, /* vx_kill, */
-       vx_add_file_command,
-       vx_lookup_symbol,
-       vx_create_inferior, 0,  /* mourn_inferior */
-       core_stratum, 0, /* next */
-       1, 1, 0, 0, 0,  /* all mem, mem, stack, regs, exec */
-       OPS_MAGIC,              /* Always the last thing */
-};
-
-/* Target ops structure for accessing VxWorks child processes over the net */
-
-struct target_ops vx_run_ops = {
-       "vxprocess", "VxWorks process",
-       "VxWorks process, started by the \"run\" command.",
-       vx_proc_open, 0, /* vx_detach, */
-       vx_resume, vx_wait,
-       vx_read_register, vx_write_register,
-       vx_prepare_to_store, vx_convert_to_virtual, vx_convert_from_virtual,
-       vx_xfer_memory, vx_run_files_info,
-       vx_insert_breakpoint, vx_remove_breakpoint,
-       0, 0, 0, 0, 0,  /* terminal stuff */
-       0, /* vx_kill, */
-       vx_add_file_command,
-       vx_lookup_symbol,
-       vx_create_inferior, vx_mourn_inferior,
-       process_stratum, 0, /* next */
-       1, 1, 1, 1, 1,  /* all mem, mem, stack, regs, exec */
-       OPS_MAGIC,              /* Always the last thing */
-};
-/* ==> Remember when reading at end of file, there are two "ops" structs here. */
-\f
-void
-_initialize_vx ()
-{
-  add_target (&vx_ops);
-  add_target (&vx_run_ops);
-}
index 5524826..e69de29 100644 (file)
@@ -1,281 +0,0 @@
-/* IBM RS/6000 host-dependent code for GDB, the GNU debugger.
-   Copyright 1986, 1987, 1989, 1991, 1992 Free Software Foundation, Inc.
-
-This file is part of GDB.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-#include "defs.h"
-#include "frame.h"
-#include "inferior.h"
-#include "symtab.h"
-#include "target.h"
-
-#ifdef IBM6000_TARGET
-
-#include <sys/param.h>
-#include <sys/dir.h>
-#include <sys/user.h>
-#include <signal.h>
-#include <sys/ioctl.h>
-#include <fcntl.h>
-
-#include <sys/ptrace.h>
-#include <sys/reg.h>
-
-#include <a.out.h>
-#include <sys/file.h>
-#include <sys/stat.h>
-#include <sys/core.h>
-
-extern int errno;
-
-static void
-exec_one_dummy_insn PARAMS ((void));
-
-/* Conversion from gdb-to-system special purpose register numbers.. */
-
-static int special_regs[] = {
-  IAR,                         /* PC_REGNUM    */
-  MSR,                         /* PS_REGNUM    */
-  CR,                          /* CR_REGNUM    */
-  LR,                          /* LR_REGNUM    */
-  CTR,                         /* CTR_REGNUM   */
-  XER,                         /* XER_REGNUM   */
-  MQ                           /* MQ_REGNUM    */
-};
-\f
-void
-fetch_inferior_registers (regno)
-  int regno;
-{
-  int ii;
-  extern char registers[];
-
-  if (regno < 0) {                     /* for all registers */
-
-    /* read 32 general purpose registers. */
-
-    for (ii=0; ii < 32; ++ii)
-      *(int*)&registers[REGISTER_BYTE (ii)] = 
-       ptrace (PT_READ_GPR, inferior_pid, (PTRACE_ARG3_TYPE) ii, 0, 0);
-
-    /* read general purpose floating point registers. */
-
-    for (ii=0; ii < 32; ++ii)
-      ptrace (PT_READ_FPR, inferior_pid, 
-       (PTRACE_ARG3_TYPE) &registers [REGISTER_BYTE (FP0_REGNUM+ii)],
-             FPR0+ii, 0);
-
-    /* read special registers. */
-    for (ii=0; ii <= LAST_SP_REGNUM-FIRST_SP_REGNUM; ++ii)
-      *(int*)&registers[REGISTER_BYTE (FIRST_SP_REGNUM+ii)] = 
-       ptrace (PT_READ_GPR, inferior_pid, (PTRACE_ARG3_TYPE) special_regs[ii],
-               0, 0);
-
-    registers_fetched ();
-    return;
-  }
-
-  /* else an individual register is addressed. */
-
-  else if (regno < FP0_REGNUM) {               /* a GPR */
-    *(int*)&registers[REGISTER_BYTE (regno)] =
-       ptrace (PT_READ_GPR, inferior_pid, (PTRACE_ARG3_TYPE) regno, 0, 0);
-  }
-  else if (regno <= FPLAST_REGNUM) {           /* a FPR */
-    ptrace (PT_READ_FPR, inferior_pid,
-       (PTRACE_ARG3_TYPE) &registers [REGISTER_BYTE (regno)],
-           (regno-FP0_REGNUM+FPR0), 0);
-  }
-  else if (regno <= LAST_SP_REGNUM) {          /* a special register */
-    *(int*)&registers[REGISTER_BYTE (regno)] =
-       ptrace (PT_READ_GPR, inferior_pid,
-               (PTRACE_ARG3_TYPE) special_regs[regno-FIRST_SP_REGNUM], 0, 0);
-  }
-  else
-    fprintf (stderr, "gdb error: register no %d not implemented.\n", regno);
-
-  register_valid [regno] = 1;
-}
-
-/* Store our register values back into the inferior.
-   If REGNO is -1, do this for all registers.
-   Otherwise, REGNO specifies which register (so we can save time).  */
-
-void
-store_inferior_registers (regno)
-     int regno;
-{
-  extern char registers[];
-
-  errno = 0;
-
-  if (regno == -1) {                   /* for all registers..  */
-      int ii;
-
-       /* execute one dummy instruction (which is a breakpoint) in inferior
-          process. So give kernel a chance to do internal house keeping.
-         Otherwise the following ptrace(2) calls will mess up user stack
-         since kernel will get confused about the bottom of the stack (%sp) */
-
-       exec_one_dummy_insn ();
-
-      /* write general purpose registers first! */
-      for ( ii=GPR0; ii<=GPR31; ++ii) {
-       ptrace (PT_WRITE_GPR, inferior_pid, (PTRACE_ARG3_TYPE) ii,
-               *(int*)&registers[REGISTER_BYTE (ii)], 0);
-       if ( errno ) { 
-         perror ("ptrace write_gpr"); errno = 0;
-       }
-      }
-
-      /* write floating point registers now. */
-      for ( ii=0; ii < 32; ++ii) {
-       ptrace (PT_WRITE_FPR, inferior_pid, 
-                 (PTRACE_ARG3_TYPE) &registers[REGISTER_BYTE (FP0_REGNUM+ii)],
-               FPR0+ii, 0);
-        if ( errno ) {
-         perror ("ptrace write_fpr"); errno = 0;
-        }
-      }
-
-      /* write special registers. */
-      for (ii=0; ii <= LAST_SP_REGNUM-FIRST_SP_REGNUM; ++ii) {
-        ptrace (PT_WRITE_GPR, inferior_pid,
-               (PTRACE_ARG3_TYPE) special_regs[ii],
-               *(int*)&registers[REGISTER_BYTE (FIRST_SP_REGNUM+ii)], 0);
-       if ( errno ) {
-         perror ("ptrace write_gpr"); errno = 0;
-       }
-      }
-  }
-
-  /* else, a specific register number is given... */
-
-  else if (regno < FP0_REGNUM) {               /* a GPR */
-
-    ptrace (PT_WRITE_GPR, inferior_pid, (PTRACE_ARG3_TYPE) regno,
-               *(int*)&registers[REGISTER_BYTE (regno)], 0);
-  }
-
-  else if (regno <= FPLAST_REGNUM) {           /* a FPR */
-    ptrace (PT_WRITE_FPR, inferior_pid, 
-           (PTRACE_ARG3_TYPE) &registers[REGISTER_BYTE (regno)],
-           regno-FP0_REGNUM+FPR0, 0);
-  }
-
-  else if (regno <= LAST_SP_REGNUM) {          /* a special register */
-
-    ptrace (PT_WRITE_GPR, inferior_pid,
-           (PTRACE_ARG3_TYPE) special_regs [regno-FIRST_SP_REGNUM],
-           *(int*)&registers[REGISTER_BYTE (regno)], 0);
-  }
-
-  else
-    fprintf (stderr, "Gdb error: register no %d not implemented.\n", regno);
-
-  if ( errno ) {
-    perror ("ptrace write");  errno = 0;
-  }
-}
-
-void
-fetch_core_registers (core_reg_sect, core_reg_size, which, reg_addr)
-     char *core_reg_sect;
-     unsigned core_reg_size;
-     int which;
-     unsigned int reg_addr;    /* Unused in this version */
-{
-  /* fetch GPRs and special registers from the first register section
-     in core bfd. */
-  if (which == 0) {
-
-    /* copy GPRs first. */
-    bcopy (core_reg_sect, registers, 32 * 4);
-
-    /* gdb's internal register template and bfd's register section layout
-       should share a common include file. FIXMEmgo */
-    /* then comes special registes. They are supposed to be in the same
-       order in gdb template and bfd `.reg' section. */
-    core_reg_sect += (32 * 4);
-    bcopy (core_reg_sect, &registers [REGISTER_BYTE (FIRST_SP_REGNUM)],
-                       (LAST_SP_REGNUM - FIRST_SP_REGNUM + 1) * 4);
-  }
-
-  /* fetch floating point registers from register section 2 in core bfd. */
-  else if (which == 2)
-    bcopy (core_reg_sect, &registers [REGISTER_BYTE (FP0_REGNUM)], 32 * 8);
-
-  else
-    fprintf (stderr, "Gdb error: unknown parameter to fetch_core_registers().\n");
-}
-
-
-/* Execute one dummy breakpoint instruction.  This way we give the kernel
-   a chance to do some housekeeping and update inferior's internal data,
-   including u_area. */
-static void
-exec_one_dummy_insn ()
-{
-#define        DUMMY_INSN_ADDR (TEXT_SEGMENT_BASE)+0x200
-
-  unsigned long shadow;
-  unsigned int status, pid;
-
-  /* We plant one dummy breakpoint into DUMMY_INSN_ADDR address. We assume that
-     this address will never be executed again by the real code. */
-
-  target_insert_breakpoint (DUMMY_INSN_ADDR, &shadow);
-
-  errno = 0;
-  ptrace (PT_CONTINUE, inferior_pid, (PTRACE_ARG3_TYPE) DUMMY_INSN_ADDR, 0, 0);
-  if (errno)
-    perror ("pt_continue");
-
-  do {
-    pid = wait (&status);
-  } while (pid != inferior_pid);
-    
-  target_remove_breakpoint (DUMMY_INSN_ADDR, &shadow);
-}
-
-
-#else /* IBM6000_TARGET */
-
-/* FIXME: Kludge this til we separate host vs. target vs. native code. */
-
-void
-fetch_inferior_registers (regno)
-  int regno;
-{
-}
-
-void
-store_inferior_registers (regno)
-     int regno;
-{
-}
-
-void
-fetch_core_registers (core_reg_sect, core_reg_size, which, reg_addr)
-     char *core_reg_sect;
-     unsigned core_reg_size;
-     int which;
-     unsigned int reg_addr;    /* Unused in this version */
-{
-}
-
-#endif /* IBM6000_TARGET */
index 785fd9d..e69de29 100755 (executable)
@@ -1,224 +0,0 @@
-
-/* operand format specifiers. */
-
-#define        TO      1
-#define        RA      2
-#define        SI      3
-#define        RT      4
-#define        UI      5
-#define        BF      6
-#define        BFA     7
-#define        BT      8
-#define        BA      9
-#define        BB      10
-#define        BO      11
-#define        BI      12
-#define        RB      13
-#define        RS      14
-#define        SH      15
-#define        MB      16
-#define        ME      17
-#define        SPR     18
-#define        DIS     19
-#define        FXM     21
-#define        FRT     22
-#define        NB      23
-#define        FRS     24
-#define        FRA     25
-#define        FRB     26
-#define        FRC     27
-#define        FLM     28
-#define        I       29
-#define        LI      30
-#define        A2      31
-#define        TA14    32              /* 14 bit representation of target address */
-#define        TA24    33              /* 24 bit representation of target address */
-#define        FL1     34
-#define        FL2     35
-#define        LEV     36
-
-#if 0
-
-       RS6000 INSTRUCTION SET
-    (sorted on first primary and second extended opcode)
-
-            oprtr            primary  ext.
-operator      ext     format  opcode   opcode   operand format
--------            -------   ------  -------  ------   ---------------
-#endif /* 0 */
-
-{"ti",         0,      "d",    3,      -1,     {TO,RA,SI,0}    },
-{"muli",       0,      "d",    7,      -1,     {RT,RA,SI,0}    },
-{"sfi",                0,      "d",    8,      -1,     {RT,RA,SI,0}    },
-{"dozi",       0,      "d",    9,      -1,     {RT,RA,SI,0}    },
-{"cmpli",      0,      "d",    10,     -1,     {BF,RA,UI,0}    },
-{"cmpi",       0,      "d",    11,     -1,     {BF,RA,SI,0}    },
-{"ai",         0,      "d",    12,     -1,     {RT,RA,SI,0}    },
-{"ai.",                0,      "d",    13,     -1,     {RT,RA,SI,0}    },
-{"lil",                0,      "d",    14,     -1,     {RT,SI,0}       }, /* same as `cal' */
-{"cal",                0,      "d",    14,     -1,     {RT,DIS,RA,0}   },
-{"liu",                0,      "d",    15,     -1,     {RT, UI,0}      }, /* same as `cau' */
-{"cau",                0,      "d",    15,     -1,     {RT,RA,UI,0}    },
-{"bb",         "1tfl", "b",    16,     -1,     {LI,A2,0}       },
-/*             ^^^^^
-    exception #1. Either fix this, or document what you are doing here. FIXMEmgo.
-*/
-{"bc",         "la",   "b",    16,     -1,     {BO,BI,TA14,0}  },
-{"svc",                "la",   "sc",   17,     -1,     {LEV,FL1,FL2,0} },
-{"b",          "la",   "i",    18,     -1,     {TA24,0}        },
-{"mcrf",       0,      "xl",   19,     0,      {BF,BFA,0}      },
-{"bcr",                "l",    "xl",   19,     16,     {BO,BI,0}       },
-{"cror",       0,      "xl",   19,     33,     {BT,BA,BB,0}    },
-{"crandc",     0,      "xl",   19,     129,    {BT,BA,BB,0}    },
-{"bcc",                "l",    "xl",   19,     193,    {BO,BI,0}       },
-{"crnor",      0,      "xl",   19,     225,    {BT,BA,BB,0}    },
-{"crand",      0,      "xl",   19,     257,    {BT,BA,BB,0}    },
-{"creqv",      0,      "xl",   19,     289,    {BT,BA,BB,0}    },
-{"crnand",     0,      "xl",   19,     289,    {BT,BA,BB,0}    },
-{"crxor",      0,      "xl",   19,     417,    {BT,BA,BB,0}    },
-{"crorc",      0,      "xl",   19,     449,    {BT,BA,BB,0}    },
-{"bcr",                "l",    "xl",   19,     528,    {BO,BI,0}       },
-{"rlimi",      ".",    "m",    20,     -1,     {RA,RS,SH,MB,ME,0} /*??*/},
-{"rlinm",      ".",    "m",    21,     -1,     {RA,RS,SH,MB,ME,0} /*??*/},
-{"rlmi",       ".",    "m",    22,     -1,     {RA,RS,RB,MB,ME,0} /*??*/},
-{"rlnm",       ".",    "m",    23,     -1,     {RA,RS,RB,MB,ME,0} /*??*/},
-{"oril",       0,      "d",    24,     -1,     {RA,RS,UI,0}    },
-{"oriu",       0,      "d",    25,     -1,     {RA,RS,UI,0}    },
-{"xoril",      0,      "d",    26,     -1,     {RA,RS,UI,0}    },
-{"xoriu",      0,      "d",    27,     -1,     {RA,RS,UI,0}    },
-{"andil.",     0,      "d",    28,     -1,     {RA,RS,UI,0}    },
-{"andiu.",     0,      "d",    29,     -1,     {RA,RS,UI,0}    },
-{"cmp",                0,      "x",    31,     0,      {BF,RA,RB,0}    },
-{"t",          0,      "x",    31,     4,      {TO,RA,RB,0}    },
-{"sf",         "o.",   "xo",   31,     8,      {RT,RA,RB,0}    },
-{"a",          "o.",   "xo",   31,     10,     {RT,RA,RB,0}    },
-{"mfcr",       0,      "x",    31,     19,     {RT,0}          },
-{"lx",         0,      "x",    31,     23,     {RT,RA,RB,0}    },
-{"sl",         ".",    "x",    31,     24,     {RA,RS,RB,0}    },
-{"cntlz",      ".",    "xo",   31,     26,     {RA,RS,0}       },
-{"and",                ".",    "x",    31,     28,     {RA,RS,RB,0}    },
-{"maskg",      ".",    "x",    31,     29,     {RA,RS,RB,0}    },
-{"cmpl",       0,      "x",    31,     32,     {BF,RA,RB,0}    },
-{"sfe",                "o.",   "xo",   31,     36,     {RT,RA,RB,0}    },
-{"lux",                0,      "x",    31,     55,     {RT,RA,RB,0}    },
-{"andc",       ".",    "x",    31,     60,     {RA,RS,RB,0}    },
-{"mfmsr",      0,      "x",    31,     83,     {RT,0}          },
-{"lbzx",       0,      "x",    31,     87,     {RT,RA,RB,0}    },
-{"neg",                "o.",   "xo",   31,     104,    {RT,RA,0}       },
-{"mul",                "o.",   "xo",   31,     107,    {RT,RA,RB,0}    },
-{"lbzux",      0,      "x",    31,     119,    {RT,RA,RB,0}    },
-{"nor",                ".",    "x",    31,     124,    {RA,RS,RB,0}    },
-{"ae",         "o.",   "xo",   31,     138,    {RT,RA,RB,0}    },
-{"mtcrf",      0,      "xfx",  31,     144,    {FXM,RS,0}      },
-{"stx",                0,      "x",    31,     151,    {RS,RA,RB,0}    },
-{"slq",                ".",    "x",    31,     152,    {RA,RS,RB,0}    },
-{"sle",                ".",    "x",    31,     153,    {RA,RS,RB,0}    },
-{"stux",       0,      "x",    31,     183,    {RS,RA,RB,0}    },
-{"sliq",       ".",    "x",    31,     184,    {RA,RS,SH,0}    },
-{"sfze",       "o.",   "xo",   31,     200,    {RT,RA,0}       },
-{"aze",                "o.",   "xo",   31,     202,    {RT,RA,0}       },
-{"stbx",       0,      "x",    31,     215,    {RS,RA,RB,0}    },
-{"sllq",       ".",    "x",    31,     216,    {RA,RS,RB,0}    },
-{"sleq",       ".",    "x",    31,     217,    {RA,RS,RB,0}    },
-{"sfme",       "o.",   "xo",   31,     232,    {RT,RA,0}       },
-{"ame",                "o.",   "xo",   31,     234,    {RT,RA,0}       },
-{"muls",       "o.",   "xo",   31,     235,    {RT,RA,RB,0}    },
-{"stbux",      0,      "x",    31,     247,    {RS,RA,RB,0}    },
-{"slliq",      ".",    "x",    31,     248,    {RA,RS,SH,0}    },
-{"doz",                "o.",   "x",    31,     264,    {RT,RA,RB,0}    },
-{"cax",                "o.",   "xo",   31,     266,    {RT,RA,RB,0}    },
-{"lscbx",      ".",    "x",    31,     277,    {RT,RA,RB,0}    },
-{"lhzx",       0,      "x",    31,     279,    {RT,RA,RB,0}    },
-{"eqv",                ".",    "x",    31,     284,    {RA,RS,RB,0}    },
-{"lhzux",      0,      "x",    31,     311,    {RT,RA,RB,0}    },
-{"xor",                ".",    "x",    31,     316,    {RA,RS,RB,0}    },
-{"div",                "o.",   "xo",   31,     331,    {RT,RA,RB,0}    },
-{"mfspr",      0,      "x",    31,     339,    {RT,SPR,0}      },
-{"lhax",       0,      "x",    31,     343,    {RT,RA,RB,0}    },
-{"abs",                "o.",   "xo",   31,     360,    {RT,RA,0}       },
-{"divs",       "o.",   "xo",   31,     363,    {RT,RA,RB,0}    },
-{"lhaux",      0,      "x",    31,     375,    {RT,RA,RB,0}    },
-{"sthx",       0,      "x",    31,     407,    {RS,RA,RB,0}    },
-{"orc",                ".",    "x",    31,     412,    {RA,RS,RB,0}    },
-{"sthux",      0,      "x",    31,     439,    {RS,RA,RB,0}    },
-{"or",         ".",    "x",    31,     444,    {RA,RS,RB,0}    },
-{"mtspr",      0,      "x",    31,     467,    {SPR,RS,0}      },
-{"nand",       ".",    "x",    31,     476,    {RA,RS,RB,0}    },
-{"nabs",       "o.",   "xo",   31,     488,    {RT,RA,0}       },
-{"mcrxr",      0,      "x",    31,     512,    {BF,0}          },
-{"lsx",                0,      "x",    31,     533,    {RT,RA,RB,0}    },
-{"lbrx",       0,      "x",    31,     534,    {RT,RA,RB,0}    },
-{"lfsx",       0,      "x",    31,     535,    {FRT,RA,RB,0}   },
-{"sr",         ".",    "x",    31,     536,    {RA,RS,RB,0}    },
-{"rrib",       ".",    "x",    31,     537,    {RA,RS,RB,0}    },
-{"maskir",     ".",    "x",    31,     541,    {RA,RS,RB,0}    },
-{"lfsux",      0,      "x",    31,     567,    {FRT,RA,RB,0}   },
-{"lsi",                0,      "x",    31,     597,    {RT,RA,NB,0}    },
-{"lfdx",       0,      "x",    31,     599,    {FRT,RA,RB,0}   },
-{"lfdux",      0,      "x",    31,     631,    {FRT,RA,RB,0}   },
-{"stsx",       0,      "x",    31,     661,    {RS,RA,RB,0}    },
-{"stbrx",      0,      "x",    31,     662,    {RA,RA,RB,0}    },
-{"stfsx",      0,      "x",    31,     663,    {FRS,RA,RB,0}   },
-{"srq",                ".",    "x",    31,     664,    {RA,RS,RB,0}    },
-{"sre",                ".",    "x",    31,     665,    {RA,RS,RB,0}    },
-{"stfsux",     0,      "x",    31,     695,    {FRS,RA,RB,0}   },
-{"sriq",       ".",    "x",    31,     696,    {RA,RS,SH,0}    },
-{"stsi",       0,      "x",    31,     725,    {RS,RA,NB,0}    },
-{"stfdx",      0,      "x",    31,     727,    {FRS,RA,RB,0}   },
-{"srlq",       ".",    "x",    31,     728,    {RA,RS,RB,0}    },
-{"sreq",       ".",    "x",    31,     729,    {RA,RS,RB,0}    },
-{"stfdux",     0,      "x",    31,     759,    {FRS,RA,RB,0}   },
-{"srliq",      ".",    "x",    31,     760,    {RA,RS,SH,0}    },
-{"lhbrx",      0,      "x",    31,     790,    {RT,RA,RB,0}    },
-{"sra",                ".",    "x",    31,     792,    {RA,RS,RB,0}    },
-{"srai",       ".",    "x",    31,     824,    {RA,RS,SH,0}    },
-{"sthbrx",     0,      "x",    31,     918,    {RS,RA,RB,0}    },
-{"sraq",       ".",    "x",    31,     920,    {RA,RS,RB,0}    },
-{"srea",       ".",    "x",    31,     921,    {RA,RS,RB,0}    },
-{"exts",       ".",    "x",    31,     922,    {RA,RS,0}       },
-{"sraiq",      ".",    "x",    31,     952,    {RA,RS,SH,0}    },
-{"l",          0,      "d",    32,     -1,     {RT,DIS,RA,0}   },
-{"lu",         0,      "d",    33,     -1,     {RT,DIS,RA,0}   },
-{"lbz",                0,      "d",    34,     -1,     {RT,DIS,RA,0}   },
-{"lbzu",       0,      "d",    35,     -1,     {RT,DIS,RA,0}   },
-{"st",         0,      "d",    36,     -1,     {RS,DIS,RA,0}   },
-{"stu",                0,      "d",    37,     -1,     {RS,DIS,RA,0}   },
-{"stb",                0,      "d",    38,     -1,     {RS,DIS,RA,0}   },
-{"stbu",       0,      "d",    39,     -1,     {RS,DIS,RA,0}   },
-{"lhz",                0,      "d",    40,     -1,     {RT,DIS,RA,0}   },
-{"lhzu",       0,      "d",    41,     -1,     {RT,DIS,RA,0}   },
-{"lha",                0,      "d",    42,     -1,     {RT,DIS,RA,0}   },
-{"lhau",       0,      "d",    43,     -1,     {RT,DIS,RA,0}   },
-{"sth",                0,      "d",    44,     -1,     {RS,DIS,RA,0}   },
-{"sthu",       0,      "d",    45,     -1,     {RS,DIS,RA,0}   },
-{"lm",         0,      "d",    46,     -1,     {RT,DIS,RA,0}   },
-{"stm",                0,      "d",    47,     -1,     {RS,DIS,RA,0}   },
-{"lfs",                0,      "d",    48,     -1,     {FRT,DIS,RA,0}  },
-{"lfsu",       0,      "d",    49,     -1,     {FRT,DIS,RA,0}  },
-{"lfd",                0,      "d",    50,     -1,     {FRT,DIS,RA,0}  },
-{"lfdu",       0,      "d",    51,     -1,     {FRT,DIS,RA,0}  },
-{"stfs",       0,      "d",    52,     -1,     {FRS,DIS,RA,0}  },
-{"stfsu",      0,      "d",    53,     -1,     {FRS,DIS,RA,0}  },
-{"stfd",       0,      "d",    54,     -1,     {FRS,DIS,RA,0}  },
-{"stfdu",      0,      "d",    55,     -1,     {FRS,DIS,RA,0}  },
-{"fcmpu",      0,      "x",    63,     0,      {BF,FRA,FRB,0}  },
-{"fm",         ".",    "a",    63,     5,      {FRT,FRA,FRC,0} },
-{"fd",         ".",    "a",    63,     8,      {FRT,FRA,FRB,0} },
-{"frsp",       ".",    "x",    63,     12,     {FRT,FRB,0}     },
-{"fs",         ".",    "a",    63,     20,     {FRT,FRA,FRB,0} },
-{"fa",         ".",    "a",    63,     21,     {FRT,FRA,FRB,0} },
-{"fms",                ".",    "a",    63,     28,     {FRT,FRA,FRC,FRB,0}     },
-{"fma",                ".",    "a",    63,     29,     {FRT,FRA,FRC,FRB,0}     },
-{"fnms",       ".",    "a",    63,     30,     {FRT,FRA,FRC,FRB,0}     },
-{"fnma",       ".",    "a",    63,     31,     {FRT,FRA,FRC,FRB,0}     },
-{"fcmpo",      0,      "x",    63,     32,     {BF,FRA,FRB,0}  },
-{"mtfsb1",     ".",    "x",    63,     38,     {BT,0}          },
-{"fneg",       ".",    "x",    63,     40,     {FRT,FRB,0}     },
-{"mcrfs",      0,      "x",    63,     64,     {BF,BFA,0}      },
-{"mtfsb0",     ".",    "x",    63,     70,     {BT,0}          },
-{"fmr",                ".",    "x",    63,     72,     {FRT,FRB,0}     },
-{"mtfsfi",     ".",    "x",    63,     134,    {BF,I,0}        },
-{"fnabs",      ".",    "x",    63,     136,    {FRT,FRB,0}     },
-{"fabs",       ".",    "x",    63,     264,    {FRT,FRB,0}     },
-{"mffs",       ".",    "x",    63,     583,    {FRT,0}         },
-{"mtfsf",      ".",    "xfl",  63,     711,    {FLM,FRB,0}     },
index 7f616b5..e69de29 100755 (executable)
@@ -1,236 +0,0 @@
-/* IBM RS/6000 instruction set definitions, for GNU software.  */
-
-typedef struct rs6000_insn {
-  char *operator;                      /* opcode name          */
-  char *opr_ext;                       /* opcode name extension */
-  char *format;                        /* opcode format        */
-  char p_opcode;                       /* primary opcode       */
-  int  e_opcode;                       /* extended opcode      */
-  char oprnd_format[6];                /* operand format       */
-} OPCODE;
-
-/* operand format specifiers */
-
-#define        TO      1
-#define        RA      2
-#define        SI      3
-#define        RT      4
-#define        UI      5
-#define        BF      6
-#define        BFA     7
-#define        BT      8
-#define        BA      9
-#define        BB      10
-#define        BO      11
-#define        BI      12
-#define        RB      13
-#define        RS      14
-#define        SH      15
-#define        MB      16
-#define        ME      17
-#define        SPR     18
-#define        DIS     19
-#define        FXM     21
-#define        FRT     22
-#define        NB      23
-#define        FRS     24
-#define        FRA     25
-#define        FRB     26
-#define        FRC     27
-#define        FLM     28
-#define        I       29
-#define        LI      30
-#define        A2      31
-#define        TA14    32              /* 14 bit representation of target address */
-#define        TA24    33              /* 24 bit representation of target address */
-#define        FL1     34
-#define        FL2     35
-#define        LEV     36
-
-/*     RS/6000 INSTRUCTION SET
-    (sorted on primary and extended opcode)
-
-            oprtr            primary  ext.
-operator      ext     format  opcode   opcode   operand format
--------            -------   ------  -------  ------   ---------------   */
-
-struct rs6000_insn rs6k_ops [] = {
-
-{"ti",         0,      "d",    3,      -1,     {TO,RA,SI,0}    },
-{"muli",       0,      "d",    7,      -1,     {RT,RA,SI,0}    },
-{"sfi",                0,      "d",    8,      -1,     {RT,RA,SI,0}    },
-{"dozi",       0,      "d",    9,      -1,     {RT,RA,SI,0}    },
-{"cmpli",      0,      "d",    10,     -1,     {BF,RA,UI,0}    },
-{"cmpi",       0,      "d",    11,     -1,     {BF,RA,SI,0}    },
-{"ai",         0,      "d",    12,     -1,     {RT,RA,SI,0}    },
-{"ai.",                0,      "d",    13,     -1,     {RT,RA,SI,0}    },
-{"lil",                0,      "d",    14,     -1,     {RT,SI,0}       }, /* same as `cal' */
-{"cal",                0,      "d",    14,     -1,     {RT,DIS,RA,0}   },
-{"liu",                0,      "d",    15,     -1,     {RT, UI,0}      }, /* same as `cau' */
-{"cau",                0,      "d",    15,     -1,     {RT,RA,UI,0}    },
-{"bb",         "1tfl", "b",    16,     -1,     {LI,A2,0}       },
-/*             ^^^^^
-  exception #1. Either fix this, or document what you are doing here. FIXMEmgo.
-*/
-{"bc",         "la",   "b",    16,     -1,     {BO,BI,TA14,0}  },
-{"svc",                "la",   "sc",   17,     -1,     {LEV,FL1,FL2,0} },
-{"b",          "la",   "i",    18,     -1,     {TA24,0}        },
-{"mcrf",       0,      "xl",   19,     0,      {BF,BFA,0}      },
-{"bcr",                "l",    "xl",   19,     16,     {BO,BI,0}       },
-{"cror",       0,      "xl",   19,     33,     {BT,BA,BB,0}    },
-{"crandc",     0,      "xl",   19,     129,    {BT,BA,BB,0}    },
-{"bcc",                "l",    "xl",   19,     193,    {BO,BI,0}       },
-{"crnor",      0,      "xl",   19,     225,    {BT,BA,BB,0}    },
-{"crand",      0,      "xl",   19,     257,    {BT,BA,BB,0}    },
-{"creqv",      0,      "xl",   19,     289,    {BT,BA,BB,0}    },
-{"crnand",     0,      "xl",   19,     289,    {BT,BA,BB,0}    },
-{"crxor",      0,      "xl",   19,     417,    {BT,BA,BB,0}    },
-{"crorc",      0,      "xl",   19,     449,    {BT,BA,BB,0}    },
-{"bcr",                "l",    "xl",   19,     528,    {BO,BI,0}       },
-{"rlimi",      ".",    "m",    20,     -1,     {RA,RS,SH,MB,ME,0} /*??*/},
-{"rlinm",      ".",    "m",    21,     -1,     {RA,RS,SH,MB,ME,0} /*??*/},
-{"rlmi",       ".",    "m",    22,     -1,     {RA,RS,RB,MB,ME,0} /*??*/},
-{"rlnm",       ".",    "m",    23,     -1,     {RA,RS,RB,MB,ME,0} /*??*/},
-{"oril",       0,      "d",    24,     -1,     {RA,RS,UI,0}    },
-{"oriu",       0,      "d",    25,     -1,     {RA,RS,UI,0}    },
-{"xoril",      0,      "d",    26,     -1,     {RA,RS,UI,0}    },
-{"xoriu",      0,      "d",    27,     -1,     {RA,RS,UI,0}    },
-{"andil.",     0,      "d",    28,     -1,     {RA,RS,UI,0}    },
-{"andiu.",     0,      "d",    29,     -1,     {RA,RS,UI,0}    },
-{"cmp",                0,      "x",    31,     0,      {BF,RA,RB,0}    },
-{"t",          0,      "x",    31,     4,      {TO,RA,RB,0}    },
-{"sf",         "o.",   "xo",   31,     8,      {RT,RA,RB,0}    },
-{"a",          "o.",   "xo",   31,     10,     {RT,RA,RB,0}    },
-{"mfcr",       0,      "x",    31,     19,     {RT,0}          },
-{"lx",         0,      "x",    31,     23,     {RT,RA,RB,0}    },
-{"sl",         ".",    "x",    31,     24,     {RA,RS,RB,0}    },
-{"cntlz",      ".",    "xo",   31,     26,     {RA,RS,0}       },
-{"and",                ".",    "x",    31,     28,     {RA,RS,RB,0}    },
-{"maskg",      ".",    "x",    31,     29,     {RA,RS,RB,0}    },
-{"cmpl",       0,      "x",    31,     32,     {BF,RA,RB,0}    },
-{"sfe",                "o.",   "xo",   31,     136,    {RT,RA,RB,0}    },
-{"lux",                0,      "x",    31,     55,     {RT,RA,RB,0}    },
-{"andc",       ".",    "x",    31,     60,     {RA,RS,RB,0}    },
-{"mfmsr",      0,      "x",    31,     83,     {RT,0}          },
-{"lbzx",       0,      "x",    31,     87,     {RT,RA,RB,0}    },
-{"neg",                "o.",   "xo",   31,     104,    {RT,RA,0}       },
-{"mul",                "o.",   "xo",   31,     107,    {RT,RA,RB,0}    },
-{"lbzux",      0,      "x",    31,     119,    {RT,RA,RB,0}    },
-{"nor",                ".",    "x",    31,     124,    {RA,RS,RB,0}    },
-{"ae",         "o.",   "xo",   31,     138,    {RT,RA,RB,0}    },
-{"mtcrf",      0,      "xfx",  31,     144,    {FXM,RS,0}      },
-{"stx",                0,      "x",    31,     151,    {RS,RA,RB,0}    },
-{"slq",                ".",    "x",    31,     152,    {RA,RS,RB,0}    },
-{"sle",                ".",    "x",    31,     153,    {RA,RS,RB,0}    },
-{"stux",       0,      "x",    31,     183,    {RS,RA,RB,0}    },
-{"sliq",       ".",    "x",    31,     184,    {RA,RS,SH,0}    },
-{"sfze",       "o.",   "xo",   31,     200,    {RT,RA,0}       },
-{"aze",                "o.",   "xo",   31,     202,    {RT,RA,0}       },
-{"stbx",       0,      "x",    31,     215,    {RS,RA,RB,0}    },
-{"sllq",       ".",    "x",    31,     216,    {RA,RS,RB,0}    },
-{"sleq",       ".",    "x",    31,     217,    {RA,RS,RB,0}    },
-{"sfme",       "o.",   "xo",   31,     232,    {RT,RA,0}       },
-{"ame",                "o.",   "xo",   31,     234,    {RT,RA,0}       },
-{"muls",       "o.",   "xo",   31,     235,    {RT,RA,RB,0}    },
-{"stbux",      0,      "x",    31,     247,    {RS,RA,RB,0}    },
-{"slliq",      ".",    "x",    31,     248,    {RA,RS,SH,0}    },
-{"doz",                "o.",   "x",    31,     264,    {RT,RA,RB,0}    },
-{"cax",                "o.",   "xo",   31,     266,    {RT,RA,RB,0}    },
-{"lscbx",      ".",    "x",    31,     277,    {RT,RA,RB,0}    },
-{"lhzx",       0,      "x",    31,     279,    {RT,RA,RB,0}    },
-{"eqv",                ".",    "x",    31,     284,    {RA,RS,RB,0}    },
-{"lhzux",      0,      "x",    31,     311,    {RT,RA,RB,0}    },
-{"xor",                ".",    "x",    31,     316,    {RA,RS,RB,0}    },
-{"div",                "o.",   "xo",   31,     331,    {RT,RA,RB,0}    },
-{"mfspr",      0,      "x",    31,     339,    {RT,SPR,0}      },
-{"lhax",       0,      "x",    31,     343,    {RT,RA,RB,0}    },
-{"abs",                "o.",   "xo",   31,     360,    {RT,RA,0}       },
-{"divs",       "o.",   "xo",   31,     363,    {RT,RA,RB,0}    },
-{"lhaux",      0,      "x",    31,     375,    {RT,RA,RB,0}    },
-{"sthx",       0,      "x",    31,     407,    {RS,RA,RB,0}    },
-{"orc",                ".",    "x",    31,     412,    {RA,RS,RB,0}    },
-{"sthux",      0,      "x",    31,     439,    {RS,RA,RB,0}    },
-{"or",         ".",    "x",    31,     444,    {RA,RS,RB,0}    },
-{"mtspr",      0,      "x",    31,     467,    {SPR,RS,0}      },
-{"nand",       ".",    "x",    31,     476,    {RA,RS,RB,0}    },
-{"nabs",       "o.",   "xo",   31,     488,    {RT,RA,0}       },
-{"mcrxr",      0,      "x",    31,     512,    {BF,0}          },
-{"lsx",                0,      "x",    31,     533,    {RT,RA,RB,0}    },
-{"lbrx",       0,      "x",    31,     534,    {RT,RA,RB,0}    },
-{"lfsx",       0,      "x",    31,     535,    {FRT,RA,RB,0}   },
-{"sr",         ".",    "x",    31,     536,    {RA,RS,RB,0}    },
-{"rrib",       ".",    "x",    31,     537,    {RA,RS,RB,0}    },
-{"maskir",     ".",    "x",    31,     541,    {RA,RS,RB,0}    },
-{"lfsux",      0,      "x",    31,     567,    {FRT,RA,RB,0}   },
-{"lsi",                0,      "x",    31,     597,    {RT,RA,NB,0}    },
-{"lfdx",       0,      "x",    31,     599,    {FRT,RA,RB,0}   },
-{"lfdux",      0,      "x",    31,     631,    {FRT,RA,RB,0}   },
-{"stsx",       0,      "x",    31,     661,    {RS,RA,RB,0}    },
-{"stbrx",      0,      "x",    31,     662,    {RS,RA,RB,0}    },
-{"stfsx",      0,      "x",    31,     663,    {FRS,RA,RB,0}   },
-{"srq",                ".",    "x",    31,     664,    {RA,RS,RB,0}    },
-{"sre",                ".",    "x",    31,     665,    {RA,RS,RB,0}    },
-{"stfsux",     0,      "x",    31,     695,    {FRS,RA,RB,0}   },
-{"sriq",       ".",    "x",    31,     696,    {RA,RS,SH,0}    },
-{"stsi",       0,      "x",    31,     725,    {RS,RA,NB,0}    },
-{"stfdx",      0,      "x",    31,     727,    {FRS,RA,RB,0}   },
-{"srlq",       ".",    "x",    31,     728,    {RA,RS,RB,0}    },
-{"sreq",       ".",    "x",    31,     729,    {RA,RS,RB,0}    },
-{"stfdux",     0,      "x",    31,     759,    {FRS,RA,RB,0}   },
-{"srliq",      ".",    "x",    31,     760,    {RA,RS,SH,0}    },
-{"lhbrx",      0,      "x",    31,     790,    {RT,RA,RB,0}    },
-{"sra",                ".",    "x",    31,     792,    {RA,RS,RB,0}    },
-{"srai",       ".",    "x",    31,     824,    {RA,RS,SH,0}    },
-{"sthbrx",     0,      "x",    31,     918,    {RS,RA,RB,0}    },
-{"sraq",       ".",    "x",    31,     920,    {RA,RS,RB,0}    },
-{"srea",       ".",    "x",    31,     921,    {RA,RS,RB,0}    },
-{"exts",       ".",    "x",    31,     922,    {RA,RS,0}       },
-{"sraiq",      ".",    "x",    31,     952,    {RA,RS,SH,0}    },
-{"l",          0,      "d",    32,     -1,     {RT,DIS,RA,0}   },
-{"lu",         0,      "d",    33,     -1,     {RT,DIS,RA,0}   },
-{"lbz",                0,      "d",    34,     -1,     {RT,DIS,RA,0}   },
-{"lbzu",       0,      "d",    35,     -1,     {RT,DIS,RA,0}   },
-{"st",         0,      "d",    36,     -1,     {RS,DIS,RA,0}   },
-{"stu",                0,      "d",    37,     -1,     {RS,DIS,RA,0}   },
-{"stb",                0,      "d",    38,     -1,     {RS,DIS,RA,0}   },
-{"stbu",       0,      "d",    39,     -1,     {RS,DIS,RA,0}   },
-{"lhz",                0,      "d",    40,     -1,     {RT,DIS,RA,0}   },
-{"lhzu",       0,      "d",    41,     -1,     {RT,DIS,RA,0}   },
-{"lha",                0,      "d",    42,     -1,     {RT,DIS,RA,0}   },
-{"lhau",       0,      "d",    43,     -1,     {RT,DIS,RA,0}   },
-{"sth",                0,      "d",    44,     -1,     {RS,DIS,RA,0}   },
-{"sthu",       0,      "d",    45,     -1,     {RS,DIS,RA,0}   },
-{"lm",         0,      "d",    46,     -1,     {RT,DIS,RA,0}   },
-{"stm",                0,      "d",    47,     -1,     {RS,DIS,RA,0}   },
-{"lfs",                0,      "d",    48,     -1,     {FRT,DIS,RA,0}  },
-{"lfsu",       0,      "d",    49,     -1,     {FRT,DIS,RA,0}  },
-{"lfd",                0,      "d",    50,     -1,     {FRT,DIS,RA,0}  },
-{"lfdu",       0,      "d",    51,     -1,     {FRT,DIS,RA,0}  },
-{"stfs",       0,      "d",    52,     -1,     {FRS,DIS,RA,0}  },
-{"stfsu",      0,      "d",    53,     -1,     {FRS,DIS,RA,0}  },
-{"stfd",       0,      "d",    54,     -1,     {FRS,DIS,RA,0}  },
-{"stfdu",      0,      "d",    55,     -1,     {FRS,DIS,RA,0}  },
-{"fcmpu",      0,      "x",    63,     0,      {BF,FRA,FRB,0}  },
-{"fm",         ".",    "a",    63,     5,      {FRT,FRA,FRC,0} },
-{"fd",         ".",    "a",    63,     8,      {FRT,FRA,FRB,0} },
-{"frsp",       ".",    "x",    63,     12,     {FRT,FRB,0}     },
-{"fs",         ".",    "a",    63,     20,     {FRT,FRA,FRB,0} },
-{"fa",         ".",    "a",    63,     21,     {FRT,FRA,FRB,0} },
-{"fms",                ".",    "a",    63,     28,     {FRT,FRA,FRC,FRB,0}     },
-{"fma",                ".",    "a",    63,     29,     {FRT,FRA,FRC,FRB,0}     },
-{"fnms",       ".",    "a",    63,     30,     {FRT,FRA,FRC,FRB,0}     },
-{"fnma",       ".",    "a",    63,     31,     {FRT,FRA,FRC,FRB,0}     },
-{"fcmpo",      0,      "x",    63,     32,     {BF,FRA,FRB,0}  },
-{"mtfsb1",     ".",    "x",    63,     38,     {BT,0}          },
-{"fneg",       ".",    "x",    63,     40,     {FRT,FRB,0}     },
-{"mcrfs",      0,      "x",    63,     64,     {BF,BFA,0}      },
-{"mtfsb0",     ".",    "x",    63,     70,     {BT,0}          },
-{"fmr",                ".",    "x",    63,     72,     {FRT,FRB,0}     },
-{"mtfsfi",     ".",    "x",    63,     134,    {BF,I,0}        },
-{"fnabs",      ".",    "x",    63,     136,    {FRT,FRB,0}     },
-{"fabs",       ".",    "x",    63,     264,    {FRT,FRB,0}     },
-{"mffs",       ".",    "x",    63,     583,    {FRT,0}         },
-{"mtfsf",      ".",    "xfl",  63,     711,    {FLM,FRB,0}     },
-};
-
-#define        NOPCODES        (sizeof (rs6k_ops) / sizeof (struct rs6000_insn))
diff --git a/gdb/signame.c b/gdb/signame.c
deleted file mode 100755 (executable)
index f96b74e..0000000
+++ /dev/null
@@ -1,260 +0,0 @@
-/* Convert between signal names and numbers, for GDB.
-   Copyright 1990, 1991, 1992 Free Software Foundation, Inc.
-
-   This file is part of GDB.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-/* GDB-specific, FIXME.  (This is for the SYS_SIGLIST_MISSING define).  */
-#include "defs.h"
-#include <signal.h>
-#include "signame.h"
-
-static void
-init_sig PARAMS ((int, const char *, const char *));
-
-static void
-init_sigs PARAMS ((void));
-
-#if SYS_SIGLIST_MISSING
-/* There is too much variation in Sys V signal numbers and names, so
-   we must initialize them at runtime.  */
-
-static const char undoc[] = "unknown signal";
-
-/* We'd like to make this const char*[], but whoever's using it might
-   want to assign from it to a char*.  */
-char *sys_siglist[NSIG];
-#endif /* SYS_SIGLIST_MISSING */
-
-/* Table of abbreviations for signals.  Note:  A given number can
-   appear more than once with different abbreviations.  */
-typedef struct
-  {
-    int number;
-    const char *abbrev;
-  } num_abbrev;
-static num_abbrev sig_table[NSIG*2];
-/* Number of elements of sig_table used.  */
-static int sig_table_nelts = 0;
-
-/* Enter signal number NUMBER into the tables with ABBREV and NAME.  */
-/* ARGSUSED */
-static void
-init_sig (number, abbrev, name)
-     int number;
-     const char *abbrev;
-     const char *name;
-{
-#if SYS_SIGLIST_MISSING
-  sys_siglist[number] = (char *) name;
-#endif
-  sig_table[sig_table_nelts].number = number;
-  sig_table[sig_table_nelts++].abbrev = abbrev;
-}
-
-static void init_sigs ()
-{
-#if SYS_SIGLIST_MISSING
-  int i;
-
-  /* Initialize signal names.  */
-       for (i = 0; i < NSIG; i++)
-               sys_siglist[i] = (char *) undoc;
-#endif /* SYS_SIGLIST_MISSING */
-
-  /* Initialize signal names.  */
-#if defined (SIGHUP)
-  init_sig (SIGHUP, "HUP", "Hangup");
-#endif
-#if defined (SIGINT)
-  init_sig (SIGINT, "INT", "Interrupt");
-#endif
-#if defined (SIGQUIT)
-  init_sig (SIGQUIT, "QUIT", "Quit");
-#endif
-#if defined (SIGILL)
-  init_sig (SIGILL, "ILL", "Illegal Instruction");
-#endif
-#if defined (SIGTRAP)
-  init_sig (SIGTRAP, "TRAP", "Trace/breakpoint trap");
-#endif
-  /* If SIGIOT == SIGABRT, we want to print it as SIGABRT because
-     SIGABRT is in ANSI and POSIX.1 and SIGIOT isn't.  */
-#if defined (SIGABRT)
-  init_sig (SIGABRT, "ABRT", "Aborted");
-#endif
-#if defined (SIGIOT)
-  init_sig (SIGIOT, "IOT", "IOT trap");
-#endif
-#if defined (SIGEMT)
-  init_sig (SIGEMT, "EMT", "EMT trap");
-#endif
-#if defined (SIGFPE)
-  init_sig (SIGFPE, "FPE", "Floating point exception");
-#endif
-#if defined (SIGKILL)
-  init_sig (SIGKILL, "KILL", "Killed");
-#endif
-#if defined (SIGBUS)
-  init_sig (SIGBUS, "BUS", "Bus error");
-#endif
-#if defined (SIGSEGV)
-  init_sig (SIGSEGV, "SEGV", "Segmentation fault");
-#endif
-#if defined (SIGSYS)
-  init_sig (SIGSYS, "SYS", "Bad system call");
-#endif
-#if defined (SIGPIPE)
-  init_sig (SIGPIPE, "PIPE", "Broken pipe");
-#endif
-#if defined (SIGALRM)
-  init_sig (SIGALRM, "ALRM", "Alarm clock");
-#endif
-#if defined (SIGTERM)
-  init_sig (SIGTERM, "TERM", "Terminated");
-#endif
-#if defined (SIGUSR1)
-  init_sig (SIGUSR1, "USR1", "User defined signal 1");
-#endif
-#if defined (SIGUSR2)
-  init_sig (SIGUSR2, "USR2", "User defined signal 2");
-#endif
-  /* If SIGCLD == SIGCHLD, we want to print it as SIGCHLD because that
-     is what is in POSIX.1.  */
-#if defined (SIGCHLD)
-  init_sig (SIGCHLD, "CHLD", "Child exited");
-#endif
-#if defined (SIGCLD)
-  init_sig (SIGCLD, "CLD", "Child exited");
-#endif
-#if defined (SIGPWR)
-  init_sig (SIGPWR, "PWR", "Power failure");
-#endif
-#if defined (SIGTSTP)
-  init_sig (SIGTSTP, "TSTP", "Stopped");
-#endif
-#if defined (SIGTTIN)
-  init_sig (SIGTTIN, "TTIN", "Stopped (tty input)");
-#endif
-#if defined (SIGTTOU)
-  init_sig (SIGTTOU, "TTOU", "Stopped (tty output)");
-#endif
-#if defined (SIGSTOP)
-  init_sig (SIGSTOP, "STOP", "Stopped (signal)");
-#endif
-#if defined (SIGXCPU)
-  init_sig (SIGXCPU, "XCPU", "CPU time limit exceeded");
-#endif
-#if defined (SIGXFSZ)
-  init_sig (SIGXFSZ, "XFSZ", "File size limit exceeded");
-#endif
-#if defined (SIGVTALRM)
-  init_sig (SIGVTALRM, "VTALRM", "Virtual timer expired");
-#endif
-#if defined (SIGPROF)
-  init_sig (SIGPROF, "PROF", "Profiling timer expired");
-#endif
-#if defined (SIGWINCH)
-  /* "Window size changed" might be more accurate, but even if that
-     is all that it means now, perhaps in the future it will be
-     extended to cover other kinds of window changes.  */
-  init_sig (SIGWINCH, "WINCH", "Window changed");
-#endif
-#if defined (SIGCONT)
-  init_sig (SIGCONT, "CONT", "Continued");
-#endif
-#if defined (SIGURG)
-  init_sig (SIGURG, "URG", "Urgent I/O condition");
-#endif
-#if defined (SIGIO)
-  /* "I/O pending" has also been suggested.  A disadvantage is
-     that signal only happens when the process has
-     asked for it, not everytime I/O is pending.  Another disadvantage
-     is the confusion from giving it a different name than under Unix.  */
-  init_sig (SIGIO, "IO", "I/O possible");
-#endif
-#if defined (SIGWIND)
-  init_sig (SIGWIND, "WIND", "SIGWIND");
-#endif
-#if defined (SIGPHONE)
-  init_sig (SIGPHONE, "PHONE", "SIGPHONE");
-#endif
-#if defined (SIGPOLL)
-  init_sig (SIGPOLL, "POLL", "I/O possible");
-#endif
-#if defined (SIGLOST)
-  init_sig (SIGLOST, "LOST", "Resource lost");
-#endif
-#if defined (SIGWAITING)
-  init_sig (SIGWAITING, "WAITING", "Process's LWPs are blocked");  /* FIXME */
-#endif
-#if defined (SIGLWP)
-  init_sig (SIGLWP, "LWP", "Signal LWP");              /* FIXME description */
-#endif
-}
-
-/* Return the abbreviation for signal NUMBER.  */
-char *
-sig_abbrev (number)
-     int number;
-{
-  int i;
-
-  for (i = 0; i < sig_table_nelts; i++)
-    if (sig_table[i].number == number)
-      return (char *)sig_table[i].abbrev;
-  return NULL;
-}
-
-/* Return the signal number for an ABBREV, or -1 if there is no
-   signal by that name.  */
-int
-sig_number (abbrev)
-     const char *abbrev;
-{
-  int i;
-
-  /* Skip over "SIG" if present.  */
-  if (abbrev[0] == 'S' && abbrev[1] == 'I' && abbrev[2] == 'G')
-    abbrev += 3;
-
-  for (i = 0; i < sig_table_nelts; i++)
-    if (abbrev[0] == sig_table[i].abbrev[0]
-       && strcmp (abbrev, sig_table[i].abbrev) == 0)
-      return sig_table[i].number;
-  return -1;
-}
-
-#if SYS_SIGLIST_MISSING
-/* Print to standard error the name of SIGNAL, preceded by MESSAGE and
-   a colon, and followed by a newline.  */
-void
-psignal (signal, message)
-     unsigned signal;
-     const char *message;
-{
-  if (signal <= 0 || signal >= NSIG)
-    fprintf (stderr, "%s: unknown signal", message);
-  else
-    fprintf (stderr, "%s: %s\n", message, sys_siglist[signal]);
-}
-#endif /* SYS_SIGLIST_MISSING */
-
-void
-_initialize_signame ()
-{
-       init_sigs ();
-}
diff --git a/gdb/signame.h b/gdb/signame.h
deleted file mode 100755 (executable)
index 0010796..0000000
+++ /dev/null
@@ -1,45 +0,0 @@
-/* Convert between signal names and numbers.
-   Copyright 1990, 1992 Free Software Foundation, Inc.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-#if !defined (SIGNAME_H)
-#define SIGNAME_H 1
-
-/* Names for signals from 0 to NSIG-1.  */
-extern char *sys_siglist[];
-
-/* Return the abbreviation (e.g. ABRT, FPE, etc.) for signal NUMBER.
-   Do not return this as a const char *.  The caller might want to
-   assign it to a char *.  */
-
-extern char *
-sig_abbrev PARAMS ((int));
-
-/* Return the signal number for an ABBREV, or -1 if there is no
-   signal by that name.  */
-
-extern int
-sig_number PARAMS ((const char *));
-
-#ifndef PSIGNAL_IN_SIGNAL_H
-/* Print to standard error the name of SIGNAL, preceded by MESSAGE and
-   a colon, and followed by a newline.  */
-
-extern void
-psignal PARAMS ((unsigned, const char *));
-#endif
-
-#endif /* !defined (SIGNAME_H) */
diff --git a/gdb/sparc-opcode.h b/gdb/sparc-opcode.h
deleted file mode 100755 (executable)
index d97c7a3..0000000
+++ /dev/null
@@ -1,643 +0,0 @@
-/* Table of opcodes for the sparc.
-   Copyright (C) 1989 Free Software Foundation, Inc.
-
-This file is part of GAS, the GNU Assembler, and GDB, the GNU disassembler.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-#if !defined(__STDC__) && !defined(const)
-#define const
-#endif
-
-/*
- * Structure of an opcode table entry.
- */
-struct sparc_opcode
-{
-    const char *name;
-    unsigned long int match;   /* Bits that must be set.  */
-    unsigned long int lose;    /* Bits that must not be set.  */
-    const char *args;
-    char flags;
-};
-
-#define        F_DELAYED       1       /* Delayed branch */
-#define        F_ALIAS         2       /* Alias for a "real" instruction */
-
-/*
-   All sparc opcodes are 32 bits, except for the `set' instruction (really
-   a macro), which is 64 bits.  It is handled as a special case.
-
-   The match component is a mask saying which bits must match a
-   particular opcode in order for an instruction to be an instance
-   of that opcode.
-
-   The args component is a string containing one character
-   for each operand of the instruction.
-
-Kinds of operands:
-   #    Number used by optimizer.  It is ignored.
-   1    rs1 register.
-   2    rs2 register.
-   d    rd register.
-   e    frs1 floating point register.
-   f    frs2 floating point register.
-   g    frsd floating point register.
-   b    crs1 coprocessor register
-   c    crs2 coprocessor register
-   D    crsd coprocessor register
-   h    22 high bits.
-   i    13 bit Immediate.
-   l    22 bit PC relative immediate.
-   L    30 bit PC relative immediate.
-   a    Annul.  The annul bit is set.
-   A    Alternate address space.  Stored as 8 bits.
-   C    Coprocessor state register.
-   F    floating point state register.
-   p    Processor state register.
-   q    Floating point queue.
-   r    Single register that is both rs1 and rsd.
-   Q    Coprocessor queue.
-   S    Special case.
-   t    Trap base register.
-   w    Window invalid mask register.
-   y    Y register.
-
-*/
-
-/* The order of the opcodes in this table is significant:
-   
-   * The assembler requires that all instances of the same mnemonic must be
-   consecutive.  If they aren't, the assembler will bomb at runtime.
-
-   * The disassembler should not care about the order of the opcodes.  */
-
-static struct sparc_opcode sparc_opcodes[] =
-{
-
-{ "ldd",        0xc1980000, 0x0060201f, "[1],D", 0 }, /* ldd [rs1+%g0],d */
-{ "ldd",        0xc1982000, 0x00601fff, "[1],D", 0 }, /* ldd [rs1+0],d */
-{ "ldd",        0xc1982000, 0x00600000, "[1+i],D", 0 },
-{ "ldd",        0xc1982000, 0x00600000, "[i+1],D", 0 },
-{ "ldd",        0xc1980000, 0x00602000, "[1+2],D", 0 },
-{ "ldd",        0xc1180000, 0x00e0201f, "[1],g", 0 }, /* ldd [rs1+%g0],d */
-{ "ldd",        0xc1182000, 0x00e01fff, "[1],g", 0 }, /* ldd [rs1+0],d */
-{ "ldd",        0xc1182000, 0x00e00000, "[1+i],g", 0 },
-{ "ldd",        0xc1182000, 0x00e00000, "[i+1],g", 0 },
-{ "ldd",        0xc1180000, 0x00e02000, "[1+2],g", 0 },
-{ "ldd",       0xc0180000, 0x01e0201f, "[1],d", 0 }, /* ldd [rs1+%g0],d */
-{ "ldd",        0xc0182000, 0x01e01fff, "[1],d", 0 }, /* ldd [rs1+0],d */
-{ "ldd",       0xc0182000, 0x01e00000, "[1+i],d", 0 },
-{ "ldd",       0xc0182000, 0x01e00000, "[i+1],d", 0 },
-{ "ldd",       0xc0180000, 0x01e02000, "[1+2],d", 0 },
-{ "ld",         0xc1880000, 0x0070201f, "[1],C", 0 }, /* ld [rs1+%g0],d */
-{ "ld",         0xc1882000, 0x00701fff, "[1],C", 0 }, /* ld [rs1+0],d */
-{ "ld",         0xc1882000, 0x00700000, "[1+i],C", 0 },
-{ "ld",         0xc1882000, 0x00700000, "[i+1],C", 0 },
-{ "ld",         0xc1880000, 0x00702000, "[1+2],C", 0 },
-{ "ld",         0xc1800000, 0x0078201f, "[1],D", 0 }, /* ld [rs1+%g0],d */
-{ "ld",         0xc1802000, 0x00781fff, "[1],D", 0 }, /* ld [rs1+0],d */
-{ "ld",         0xc1802000, 0x00780000, "[1+i],D", 0 },
-{ "ld",         0xc1802000, 0x00780000, "[i+1],D", 0 },
-{ "ld",         0xc1800000, 0x00782000, "[1+2],D", 0 },
-{ "ld",         0xc1080000, 0x00f0201f, "[1],F", 0 }, /* ld [rs1+%g0],d */
-{ "ld",         0xc1082000, 0x00f01fff, "[1],F", 0 }, /* ld [rs1+0],d */
-{ "ld",         0xc1082000, 0x00f00000, "[1+i],F", 0 },
-{ "ld",         0xc1082000, 0x00f00000, "[i+1],F", 0 },
-{ "ld",         0xc1080000, 0x00f02000, "[1+2],F", 0 },
-{ "ld",         0xc1000000, 0x00f8201f, "[1],g", 0 }, /* ld [rs1+%g0],d */
-{ "ld",         0xc1002000, 0x00f81fff, "[1],g", 0 }, /* ld [rs1+0],d */
-{ "ld",         0xc1002000, 0x00f80000, "[1+i],g", 0 },
-{ "ld",         0xc1002000, 0x00f80000, "[i+1],g", 0 },
-{ "ld",         0xc1000000, 0x00f82000, "[1+2],g", 0 },
-{ "ld",                0xc0000000, 0x01f8201f, "[1],d", 0 }, /* ld [rs1+%g0],d */
-{ "ld",                0xc0002000, 0x01f81fff, "[1],d", 0 }, /* ld [rs1+0],d */
-{ "ld",                0xc0002000, 0x01f80000, "[1+i],d", 0 },
-{ "ld",                0xc0002000, 0x01f80000, "[i+1],d", 0 },
-{ "ld",                0xc0000000, 0x01f82000, "[1+2],d", 0 },
-{ "ldstuba",    0xc0d80000, 0x0100201f, "[1]A,d", 0 }, /* ldstuba [rs1+%g0],d */
-{ "ldstuba",   0xc0d80000, 0x01002000, "[1+2]A,d", 0 },
-{ "ldsha",      0xc0d00000, 0x0128201f, "[1]A,d", 0 }, /* ldsha [rs1+%g0],d */
-{ "ldsha",     0xc0d00000, 0x01282000, "[1+2]A,d", 0 },
-{ "ldsba",      0xc0c80000, 0x0130201f, "[1]A,d", 0 }, /* ldsba [rs1+%g0],d */
-{ "ldsba",     0xc0c80000, 0x01302000, "[1+2]A,d", 0 },
-{ "ldda",       0xc0980000, 0x0160201f, "[1]A,d", 0 }, /* ldda [rs1+%g0],d */
-{ "ldda",      0xc0980000, 0x01602000, "[1+2]A,d", 0 },
-{ "lduha",      0xc0900000, 0x0168201f, "[1]A,d", 0 }, /* lduha [rs1+%g0],d */
-{ "lduha",     0xc0900000, 0x01682000, "[1+2]A,d", 0 },
-{ "ldstub",     0xc0680000, 0x0190201f, "[1],d", 0 }, /* ldstub [rs1+%g0],d */
-{ "ldstub",    0xc0682000, 0x01900000, "[1+i],d", 0 },
-{ "ldstub",    0xc0682000, 0x01900000, "[i+1],d", 0 },
-{ "ldstub",    0xc0680000, 0x01902000, "[1+2],d", 0 },
-{ "lda",        0xc0800000, 0x0178201f, "[1]A,d", 0 }, /* lda [rs1+%g0],d */
-{ "lda",       0xc0800000, 0x01782000, "[1+2]A,d", 0 },
-{ "ldsh",       0xc0500000, 0x0000000d, "[1],d", 0 }, /* ldsh [rs1+%g0],d */
-{ "ldsh",       0xc0502000, 0x01a81fff, "[1],d", 0 }, /* ldsh [rs1+0],d */
-{ "ldsh",      0xc0502000, 0x01a80000, "[1+i],d", 0 },
-{ "ldsh",      0xc0502000, 0x01a80000, "[i+1],d", 0 },
-{ "ldsh",      0xc0500000, 0x01a82000, "[1+2],d", 0 },
-{ "ldsb",       0xc0480000, 0x01b0201f, "[1],d", 0 }, /* ldsb [rs1+%g0],d */
-{ "ldsb",      0xc0482000, 0x01b01fff, "[1],d", 0 }, /* ldsb [rs1+0],d */
-{ "ldsb",      0xc0482000, 0x01b00000, "[1+i],d", 0 },
-{ "ldsb",      0xc0482000, 0x01b00000, "[i+1],d", 0 },
-{ "ldsb",      0xc0480000, 0x01b02000, "[1+2],d", 0 },
-{ "ldub",       0xc0080000, 0x01f0201f, "[1],d", 0 }, /* ldub [rs1+%g0],d */
-{ "ldub",       0xc0082000, 0x01f01fff, "[1],d", 0 }, /* ldub [rs1+0],d */
-{ "ldub",      0xc0082000, 0x01f00000, "[1+i],d", 0 },
-{ "ldub",      0xc0082000, 0x01f00000, "[i+1],d", 0 },
-{ "ldub",      0xc0080000, 0x01f02000, "[1+2],d", 0 },
-{ "lduba",      0xc0880000, 0x0170201f, "[1]A,d", 0 }, /* lduba [rs1+%g0],d */
-{ "lduba",     0xc0880000, 0x01702000, "[1+2]A,d", 0 },
-{ "lduh",      0xc0102000, 0x01e80000, "[1+i],d", 0 },
-{ "lduh",      0xc0102000, 0x01e80000, "[i+1],d", 0 },
-{ "lduh",      0xc0100000, 0x01e8201f, "[1],d", 0 }, /* lduh [rs1+%g0],d */
-{ "lduh",      0xc0102000, 0x01e81fff, "[1],d", 0 }, /* lduh [rs1+0],d */
-{ "lduh",      0xc0100000, 0x01e82000, "[1+2],d", 0 },
-
-{ "st",                0xc0200000, 0x01d8201f, "d,[1]", 0 }, /* st d,[rs1+%g0] */
-{ "st",                0xc0202000, 0x01d81fff, "d,[1]", 0 }, /* st d,[rs1+0] */
-{ "st",                0xc0202000, 0x01d80000, "d,[1+i]", 0 },
-{ "st",                0xc0202000, 0x01d80000, "d,[i+1]", 0 },
-{ "st",                0xc0200000, 0x01d82000, "d,[1+2]", 0 },
-{ "st",                0xc1200000, 0x00d8201f, "g,[1]", 0 }, /* st d[rs1+%g0] */
-{ "st",                0xc1202000, 0x00d81fff, "g,[1]", 0 }, /* st d,[rs1+0] */
-{ "st",                0xc1202000, 0x00d80000, "g,[1+i]", 0 },
-{ "st",                0xc1202000, 0x00d80000, "g,[i+1]", 0 },
-{ "st",                0xc1200000, 0x00d82000, "g,[1+2]", 0 },
-{ "st",                0xc1280000, 0x00d0201f, "F,[1]", 0 }, /* st %fsr,[rs1+%g0] */
-{ "st",                0xc1282000, 0x00d01fff, "F,[1]", 0 }, /* st %fsr,[rs1+0] */
-{ "st",                0xc1282000, 0x00d00000, "F,[1+i]", 0 },
-{ "st",                0xc1282000, 0x00d00000, "F,[i+1]", 0 },
-{ "st",                0xc1280000, 0x00d02000, "F,[1+2]", 0 },
-{ "st",                0xc1a00000, 0x0058201f, "D,[1]", 0 }, /* st d,[rs1+%g0] */
-{ "st",                0xc1a02000, 0x00581fff, "D,[1]", 0 }, /* st d,[rs1+0] */
-{ "st",                0xc1a02000, 0x00580000, "D,[1+i]", 0 },
-{ "st",                0xc1a02000, 0x00580000, "D,[i+1]", 0 },
-{ "st",                0xc1a00000, 0x00582000, "D,[1+2]", 0 },
-{ "st",                0xc1a80000, 0x0050201f, "C,[1]", 0 }, /* st d,[rs1+%g0] */
-{ "st",                0xc1a82000, 0x00501fff, "C,[1]", 0 }, /* st d,[rs1+0] */
-{ "st",                0xc1a82000, 0x00500000, "C,[1+i]", 0 },
-{ "st",                0xc1a82000, 0x00500000, "C,[i+1]", 0 },
-{ "st",                0xc1a80000, 0x00502000, "C,[1+2]", 0 },
-{ "sta",        0xc0a00000, 0x0108201f, "d,[1]A", 0 }, /* sta d,[rs1+%g0] */
-{ "sta",       0xc0a00000, 0x01082000, "d,[1+2]A", 0 },
-
-{ "stb",        0xc0280000, 0x01d0201f, "d,[1]", 0 }, /* stb d,[rs1+%g0] */
-{ "stb",       0xc0282000, 0x01d01fff, "d,[1]", 0 }, /* stb d,[rs1+0] */
-{ "stb",       0xc0282000, 0x01d00000, "d,[1+i]", 0 },
-{ "stb",       0xc0282000, 0x01d00000, "d,[i+1]", 0 },
-{ "stb",       0xc0280000, 0x01d02000, "d,[1+2]", 0 },
-{ "stba",       0xc0a80000, 0x01002000, "d,[1+2]A", 0 },
-{ "stba",      0xc0a80000, 0x0100201f, "d,[1]A", 0 }, /* stba d,[rs1+%g0] */
-
-{ "std",        0xc0380000, 0x01c0201f, "d,[1]", 0 }, /* std d,[rs1+%g0] */
-{ "std",       0xc0382000, 0x01c01fff, "d,[1]", 0 }, /* std d,[rs1+0] */
-{ "std",       0xc0382000, 0x01c00000, "d,[1+i]", 0 },
-{ "std",       0xc0382000, 0x01c00000, "d,[i+1]", 0 },
-{ "std",       0xc0380000, 0x01c02000, "d,[1+2]", 0 },
-{ "std",       0xc1380000, 0x00c0201f, "g,[1]", 0 }, /* std d,[rs1+%g0] */
-{ "std",        0xc1382000, 0x00c01fff, "g,[1]", 0 }, /* std d,[rs1+0] */
-{ "std",       0xc1382000, 0x00c00000, "g,[1+i]", 0 },
-{ "std",       0xc1382000, 0x00c00000, "g,[i+1]", 0 },
-{ "std",       0xc1380000, 0x00c02000, "g,[1+2]", 0 },
-{ "std",        0xc1300000, 0x00c8201f, "q,[1]", 0 }, /* std d,[rs1+%g0] */
-{ "std",       0xc1302000, 0x00c81fff, "q,[1]", 0 }, /* std d,[rs1+0] */
-{ "std",       0xc1302000, 0x00c80000, "q,[1+i]", 0 },
-{ "std",       0xc1302000, 0x00c80000, "q,[i+1]", 0 },
-{ "std",       0xc1300000, 0x00c82000, "q,[1+2]", 0 },
-{ "std",       0xc1b80000, 0x0040201f, "D,[1]", 0 }, /* std d,[rs1+%g0] */
-{ "std",       0xc1b82000, 0x00401fff, "D,[1]", 0 }, /* std d,[rs1+0] */
-{ "std",       0xc1b82000, 0x00400000, "D,[1+i]", 0 },
-{ "std",       0xc1b82000, 0x00400000, "D,[i+1]", 0 },
-{ "std",       0xc1b80000, 0x00402000, "D,[1+2]", 0 },
-{ "std",       0xc1b00000, 0x0048201f, "Q,[1]", 0 }, /* std d,[rs1+%g0] */
-{ "std",       0xc1b02000, 0x00481fff, "Q,[1]", 0 }, /* std d,[rs1+0] */
-{ "std",       0xc1b02000, 0x00480000, "Q,[1+i]", 0 },
-{ "std",       0xc1b02000, 0x00480000, "Q,[i+1]", 0 },
-{ "std",       0xc1b00000, 0x00482000, "Q,[1+2]", 0 },
-{ "stda",       0xc0b80000, 0x01402000, "d,[1+2]A", 0 },
-{ "stda",      0xc0b80000, 0x0140201f, "d,[1]A", 0 }, /* stda d,[rs1+%g0] */
-
-{ "sth",        0xc0300000, 0x01c8201f, "d,[1]", 0 }, /* sth d,[rs1+%g0] */
-{ "sth",       0xc0302000, 0x01c81fff, "d,[1]", 0 }, /* sth d,[rs1+0] */
-{ "sth",       0xc0300000, 0x01c82000, "d,[1+2]", 0 },
-{ "sth",       0xc0302000, 0x01c80000, "d,[1+i]", 0 },
-{ "sth",       0xc0302000, 0x01c80000, "d,[i+1]", 0 },
-{ "stha",       0xc0b00000, 0x0148201f, "d,[1]A", 0 }, /* stha d,[rs1+%g0] */
-{ "stha",      0xc0b00000, 0x01482000, "d,[1+2]A", 0 },
-
-{ "swap",       0xc0780000, 0x0180201f, "[1],d", 0 }, /* swap [rs1+%g0],d */
-{ "swap",       0xc0782000, 0x01801fff, "[1],d", 0 }, /* swap [rs1+0],d */
-{ "swap",       0xc0782000, 0x01800000, "[1+i],d", 0 },
-{ "swap",       0xc0782000, 0x01800000, "[i+1],d", 0 },
-{ "swap",       0xc0780000, 0x01802000, "[1+2],d", 0 },
-{ "swapa",      0xc0f80000, 0x01002000, "[1+2]A,d", 0 },
-{ "swapa",      0xc0f80000, 0x0100201f, "[1]A,d", 0 }, /* swapa [rs1+%g0],d */
-
-{ "restore",    0x81e80000, 0x7e17e01f, "", 0 }, /* restore %g0,%g0,%g0 */
-{ "restore",    0x81e82000, 0x7e14dfff, "", 0 }, /* restore %g0,0,%g0 */
-{ "restore",   0x81e82000, 0x00000000, "1,i,d", 0 },
-{ "restore",   0x81e80000, 0x00000000, "1,2,d", 0 },
-{ "rett",       0x81c82000, 0x40300000, "1+i", F_DELAYED },
-{ "rett",       0x81c82000, 0x40300000, "i+1", F_DELAYED },
-{ "rett",      0x81c80000, 0x40302000, "1+2", F_DELAYED },
-{ "rett",      0x81c82000, 0x40301fff, "1", F_DELAYED}, /* rett X,0 */
-{ "rett",      0x81c80000, 0x4030201f, "1", F_DELAYED}, /* rett X,%g0 */
-{ "save",       0x81e02000, 0x40180000, "1,i,d", 0 },
-{ "save",      0x81e00000, 0x40180000, "1,2,d", 0 },
-
-{ "ret",       0x81c7e008, 0x00001ff7, "", F_DELAYED }, /* jmpl %i7+8,%g0 */
-{ "retl",       0x81c3e008, 0x00001ff7, "", F_DELAYED }, /* jmpl %o7+8,%g0 */
-
-{ "jmpl",       0x81c00000, 0x4038201f, "1,d", F_DELAYED }, /* jmpl rs1+%g0,d */
-{ "jmpl",      0x81c02000, 0x4037c000, "i,d", F_DELAYED }, /* jmpl %g0+i,d */
-{ "jmpl",      0x81c02000, 0x40380000, "1+i,d", F_DELAYED },
-{ "jmpl",      0x81c02000, 0x40380000, "i+1,d", F_DELAYED },
-{ "jmpl",      0x81c00000, 0x40382000, "1+2,d", F_DELAYED },
-{ "wr",         0x81982000, 0x40600000, "1,i,t", 0 },
-{ "wr",         0x81980000, 0x40600000, "1,2,t", 0 },
-{ "wr",         0x81902000, 0x40680000, "1,i,w", 0 },
-{ "wr",         0x81900000, 0x40680000, "1,2,w", 0 },
-{ "wr",         0x81882000, 0x40700000, "1,i,p", 0 },
-{ "wr",         0x81880000, 0x40700000, "1,2,p", 0 },
-{ "wr",         0x81802000, 0x40780000, "1,i,y", 0 },
-{ "wr",         0x81800000, 0x40780000, "1,2,y", 0 },
-
-{ "rd",        0x81580000, 0x40a00000, "t,d", 0 },
-{ "rd",        0x81500000, 0x40a80000, "w,d", 0 },
-{ "rd",        0x81480000, 0x40b00000, "p,d", 0 },
-{ "rd",         0x81400000, 0x40b80000, "y,d", 0 },
-
-{ "sra",       0x81382000, 0x00000000, "1,i,d", 0 },
-{ "sra",       0x81380000, 0x00000000, "1,2,d", 0 },
-{ "srl",        0x81302000, 0x40c80000, "1,i,d", 0 },
-{ "srl",       0x81300000, 0x40c80000, "1,2,d", 0 },
-{ "sll",        0x81282000, 0x40d00000, "1,i,d", 0 },
-{ "sll",       0x81280000, 0x40d00000, "1,2,d", 0 },
-
-{ "mulscc",     0x81202000, 0x40d80000, "1,i,d", 0 },
-{ "mulscc",    0x81200000, 0x40d80000, "1,2,d", 0 },
-
-{ "clr",        0x80100000, 0x4e87e01f, "d", F_ALIAS }, /* or %g0,%g0,d */
-{ "clr",        0x80102000, 0x41efdfff, "d", F_ALIAS }, /* or %g0,0,d   */
-{ "clr",       0xc0200000, 0x3fd8001f, "[1]", F_ALIAS }, /* st %g0,[rs1+%g0] */
-{ "clr",       0xc0202000, 0x3fd81fff, "[1]", F_ALIAS }, /* st %g0,[rs1+0] */
-{ "clr",       0xc0202000, 0x3fd80000, "[1+i]", F_ALIAS },
-{ "clr",       0xc0202000, 0x3fd80000, "[i+1]", F_ALIAS },
-{ "clr",       0xc0200000, 0x3fd80000, "[1+2]", F_ALIAS },
-
-{ "clrb",       0xc0280000, 0x3fd0001f, "[1]", F_ALIAS },/* stb %g0,[rs1+%g0] */
-{ "clrb",      0xc0282000, 0x3fd00000, "[1+i]", F_ALIAS },
-{ "clrb",      0xc0282000, 0x3fd00000, "[i+1]", F_ALIAS },
-{ "clrb",      0xc0280000, 0x3fd00000, "[1+2]", F_ALIAS },
-
-{ "clrh",       0xc0300000, 0x3fc8001f, "[1]", F_ALIAS },/* sth %g0,[rs1+%g0] */
-{ "clrh",      0xc0300000, 0x3fc80000, "[1+2]", F_ALIAS },
-{ "clrh",      0xc0302000, 0x3fc80000, "[1+i]", F_ALIAS },
-{ "clrh",      0xc0302000, 0x3fc80000, "[i+1]", F_ALIAS },
-
-{ "orncc",      0x80b02000, 0x04048000, "1,i,d", 0 },
-{ "orncc",     0x80b00000, 0x04048000, "1,2,d", 0 },
-
-{ "tst",        0x80900000, 0x7f6fe000, "2", 0 }, /* orcc %g0, rs2, %g0 */
-{ "tst",        0x80900000, 0x7f68201f, "1", 0 }, /* orcc rs1, %g0, %g0 */
-{ "tst",        0x80902000, 0x7f681fff, "1", 0 }, /* orcc rs1, 0, %g0 */
-  
-{ "orcc",       0x80902000, 0x41680000, "1,i,d", 0 },
-{ "orcc",      0x80902000, 0x41680000, "i,1,d", 0 },
-{ "orcc",      0x80900000, 0x41680000, "1,2,d", 0 },
-{ "orn",        0x80302000, 0x41c80000, "1,i,d", 0 },
-{ "orn",       0x80300000, 0x41c80000, "1,2,d", 0 },
-
-{ "mov",        0x81800000, 0x4078201f, "1,y", F_ALIAS }, /* wr rs1,%g0,%y */
-{ "mov",        0x81802000, 0x40781fff, "1,y", F_ALIAS }, /* wr rs1,0,%y */
-{ "mov",        0x81802000, 0x40780000, "i,y", F_ALIAS },
-{ "mov",        0x81400000, 0x40b80000, "y,d", F_ALIAS }, /* rd %y,d */
-{ "mov",        0x81980000, 0x4060201f, "1,t", F_ALIAS }, /* wr rs1,%g0,%tbr */
-{ "mov",        0x81982000, 0x40601fff, "1,t", F_ALIAS }, /* wr rs1,0,%tbr */
-{ "mov",        0x81982000, 0x40600000, "i,t", F_ALIAS },
-{ "mov",        0x81580000, 0x40a00000, "t,d", F_ALIAS }, /* rd %tbr,d */
-{ "mov",        0x81900000, 0x4068201f, "1,w", F_ALIAS }, /* wr rs1,%g0,%wim */
-{ "mov",        0x81902000, 0x40681fff, "1,w", F_ALIAS }, /* wr rs1,0,%wim */
-{ "mov",        0x81902000, 0x40680000, "i,w", F_ALIAS },
-{ "mov",        0x81500000, 0x40a80000, "w,d", F_ALIAS }, /* rd %wim,d */
-{ "mov",        0x81880000, 0x4070201f, "1,p", F_ALIAS }, /* wr rs1,%g0,%psr */
-{ "mov",        0x81882000, 0x40701fff, "1,p", F_ALIAS }, /* wr rs1,0,%psr */
-{ "mov",        0x81882000, 0x40700000, "i,p", F_ALIAS },
-{ "mov",        0x81480000, 0x40b00000, "p,d", F_ALIAS }, /* rd %psr,d */
-
-{ "mov",        0x80102000, 0x41efc000, "i,d", 0 }, /* or %g0,i,d   */
-{ "mov",        0x80100000, 0x41efe000, "2,d", 0 }, /* or %g0,rs2,d */
-{ "mov",        0x80102000, 0x41e81fff, "1,d", 0 }, /* or rs1,0,d */
-{ "mov",        0x80100000, 0x41e8201f, "1,d", 0 }, /* or rs1,%g0,d   */
-
-{ "or",                0x80102000, 0x40800000, "1,i,d", 0 },
-{ "or",                0x80102000, 0x40800000, "i,1,d", 0 },
-{ "or",                0x80100000, 0x40800000, "1,2,d", 0 },
-
-{ "bset",      0x80102000, 0x40800000, "i,r", F_ALIAS },/* or rd,i,rd */
-{ "bset",      0x80100000, 0x40800000, "2,r", F_ALIAS },/* or rd,rs2,rd */
-
-{ "andncc",     0x80a82000, 0x41500000, "1,i,d", 0 },
-{ "andncc",    0x80a80000, 0x41500000, "1,2,d", 0 },
-{ "andn",       0x80282000, 0x41d00000, "1,i,d", 0 },
-{ "andn",      0x80280000, 0x41d00000, "1,2,d", 0 },
-
-{ "bclr",      0x80282000, 0x41d00000, "i,r", F_ALIAS },/* andn rd,i,rd */
-{ "bclr",      0x80280000, 0x41d00000, "2,r", F_ALIAS },/* andn rd,rs2,rd */
-
-{ "cmp",        0x80a02000, 0x7d580000, "1,i", 0 },     /* subcc rs1,i,%g0 */
-{ "cmp",       0x80a00000, 0x7d580000, "1,2", 0 },     /* subcc rs1,rs2,%g0 */
-
-{ "subcc",      0x80a02000, 0x41580000, "1,i,d", 0 },
-{ "subcc",     0x80a00000, 0x41580000, "1,2,d", 0 },
-{ "sub",       0x80202000, 0x41d80000, "1,i,d", 0 },
-{ "sub",       0x80200000, 0x41d80000, "1,2,d", 0 },
-{ "subx",      0x80602000, 0x41980000, "1,i,d", 0 },
-{ "subx",      0x80600000, 0x41980000, "1,2,d", 0 },
-{ "subxcc",     0x80e02000, 0x41180000, "1,i,d", 0 },
-{ "subxcc",    0x80e00000, 0x41180000, "1,2,d", 0 },
-
-{ "andcc",      0x80882000, 0x41700000, "1,i,d", 0 },
-{ "andcc",     0x80882000, 0x41700000, "i,1,d", 0 },
-{ "andcc",     0x80880000, 0x41700000, "1,2,d", 0 },
-{ "and",        0x80082000, 0x41f00000, "1,i,d", 0 },
-{ "and",       0x80082000, 0x41f00000, "i,1,d", 0 },
-{ "and",       0x80080000, 0x41f00000, "1,2,d", 0 },
-
-{ "inc",       0x80002001, 0x41f81ffe, "r", F_ALIAS }, /* add rs1,1,rsd */
-{ "inccc",     0x80802001, 0x41781ffe, "r", F_ALIAS }, /* addcc rd,1,rd */
-{ "dec",        0x80202001, 0x41d81ffe, "r", F_ALIAS },        /* sub rd,1,rd */
-{ "deccc",     0x80a02001, 0x41581ffe, "r", F_ALIAS }, /* subcc rd,1,rd */
-
-{ "btst",      0x80882000, 0x41700000, "i,1", F_ALIAS },/* andcc rs1,i,%g0 */
-{ "btst",      0x80880000, 0x41700000, "1,2", F_ALIAS },/* andcc rs1,rs2,%0 */
-
-{ "neg",       0x80200000, 0x41d80000, "r", F_ALIAS }, /* sub %0,rd,rd */
-{ "neg",       0x80200000, 0x41d80000, "2,d", F_ALIAS }, /* sub %0,rs2,rd */
-
-{ "addxcc",     0x80c02000, 0x41380000, "1,i,d", 0 },
-{ "addxcc",     0x80c02000, 0x41380000, "i,1,d", 0 },
-{ "addxcc",     0x80c00000, 0x41380000, "1,2,d", 0 },
-{ "addcc",      0x80802000, 0x41780000, "1,i,d", 0 },
-{ "addcc",      0x80802000, 0x41780000, "i,1,d", 0 },
-{ "addcc",      0x80800000, 0x41780000, "1,2,d", 0 },
-{ "addx",       0x80402000, 0x41b80000, "1,i,d", 0 },
-{ "addx",      0x80402000, 0x41b80000, "i,1,d", 0 },
-{ "addx",      0x80400000, 0x41b80000, "1,2,d", 0 },
-{ "add",        0x80002000, 0x41f80000, "1,i,d", 0 },
-{ "add",       0x80002000, 0x41f80000, "i,1,d", 0 },
-{ "add",       0x80000000, 0x41f80000, "1,2,d", 0 },
-
-{ "call",       0x9fc00000, 0x4038201f, "1", F_DELAYED }, /* jmpl rs1+%g0, %o7 */
-{ "call",      0x9fc00000, 0x4038201f, "1,#", F_DELAYED },
-{ "call",      0x40000000, 0x80000000, "L", F_DELAYED },
-{ "call",      0x40000000, 0x80000000, "L,#", F_DELAYED },
-
-{ "jmp",        0x81c00000, 0x7e38201f, "1", F_DELAYED }, /* jmpl rs1+%g0,%g0 */
-{ "jmp",        0x81c02000, 0x7e3fc000, "i", F_DELAYED }, /* jmpl %g0+i,%g0 */
-{ "jmp",        0x81c00000, 0x7e382000, "1+2", F_DELAYED }, /* jmpl rs1+rs2,%g0 */
-{ "jmp",        0x81c02000, 0x7e380000, "1+i", F_DELAYED }, /* jmpl rs1+i,%g0 */
-{ "jmp",        0x81c02000, 0x7e380000, "i+1", F_DELAYED }, /* jmpl i+rs1,%g0 */
-
-{ "nop",       0x01000000, 0xfeffffff, "", 0 }, /* sethi 0, %g0 */
-
-{ "set",        0x01000000, 0xc0c00000, "Sh,d", F_ALIAS },
-
-{ "sethi",      0x01000000, 0xc0c00000, "h,d", 0 },
-
-{ "taddcctv",   0x81102000, 0x40e00000, "1,i,d", 0 },
-{ "taddcctv",   0x81100000, 0x40e00000, "1,2,d", 0 },
-{ "taddcc",     0x81002000, 0x40f80000, "1,i,d", 0 },
-{ "taddcc",     0x81000000, 0x40f80000, "1,2,d", 0 },
-
-/* Conditional instructions.
-
-   Because this part of the table was such a mess earlier, I have
-   macrofied it so that all the branches and traps are generated from
-   a single-line description of each condition value.  */
-
-#define ANNUL  0x20000000
-#define        IMMED  0x00002000
-#define        RS1_G0 0x0007C000
-#define        RS2_G0 0x0000001F
-
-/* Define two branches -- one annulled, one without */
-#define br(opcode, mask, lose, flags)  \
- { opcode, mask+ANNUL, lose, ",al", flags },   \
- { opcode, mask      , lose, "l",   flags }
-
-/* Define four traps: reg+reg, reg + immediate, immediate alone, reg alone. */
-#define tr(opcode, mask, lose, flags) \
- {opcode, mask+IMMED, lose+RS1_G0      , "i", flags },  /* %g0 + imm */ \
- {opcode, mask+IMMED, lose             , "1+i", flags }, /* rs1 + imm */ \
- {opcode, mask      , lose+IMMED       , "1+2", flags }, /* rs1 + rs2 */ \
- {opcode, mask      , lose+IMMED+RS2_G0, "1", flags }    /* rs1 + %g0 */
-
-/* Define both branches and traps based on condition mask */
-#ifdef __STDC__
-#define cond(bop, top, mask, flags)    \
-  br(#bop,  0x00800000+(mask << 25), 0xC1400000, F_DELAYED|flags), \
-  tr(#top,  0x81d00000+(mask << 25), 0x40280000, flags)
-#else
-#define cond(bop, top, mask, flags)    \
-  br("bop", 0x00800000+(mask << 25), 0xC1400000, F_DELAYED|flags), \
-  tr("top", 0x81d00000+(mask << 25), 0x40280000, flags)
-#endif
-
-/* Define all the conditions, all the branches, all the traps.  */
-/* Use no extra spaces or tabs around the first two args, since cpp
-   will include them in the printed strings.  */
-cond (bvc,tvc,   0xF, 0),
-cond (bvs,tvs,   0x7, 0),
-cond (bpos,tpos, 0xE, 0),
-cond (bneg,tneg, 0x6, 0),
-cond (bcc,tcc,   0xD, 0),
-cond (bcs,tcs,   0x5, 0),
-cond (blu,tlu,   0x5, F_ALIAS), /* for cs */
-cond (bgeu,tgeu, 0xD, F_ALIAS), /* for cc */
-cond (bgu,tgu,   0xC, 0),
-cond (bleu,tleu, 0x4, 0),
-cond (bge,tge,   0xB, 0),
-cond (bl,tl,     0x3, 0),
-cond (bg,tg,     0xA, 0),
-cond (ble,tle,   0x2, 0),
-cond (be,te,     0x1, 0),
-cond (bz,tz,     0x1, F_ALIAS), /* for e */
-cond (bne,tne,   0x9, 0),
-cond (bnz,tnz,   0x9, F_ALIAS), /* for ne */
-cond (b,t,       0x8, 0),
-cond (ba,ta,     0x8, F_ALIAS), /* for nothing */
-cond (bn,tn,     0x0, 0),
-
-#undef cond
-#undef br
-#undef tr
-
-{ "tsubcc",     0x81080000, 0x40f00000, "1,2,d", 0 },
-{ "tsubcc",     0x81082000, 0x40f00000, "1,i,d", 0 },
-{ "tsubcctv",   0x80580000, 0x40a00000, "1,2,d", 0 },
-{ "tsubcctv",   0x80582000, 0x40a00000, "1,i,d", 0 },
-
-{ "unimp",      0x00000000, 0xFFFFFFFF, "l", 0 },
-
-{ "iflush",     0x81d80000, 0x40202000, "1+2", 0 },
-{ "iflush",     0x81d82000, 0x40200000, "1+i", 0 },
-
-{ "xnorcc",     0x80b80000, 0x41400000, "1,2,d", 0 },
-{ "xnorcc",    0x80b82000, 0x41400000, "1,i,d", 0 },
-{ "xnorcc",    0x80b82000, 0x41400000, "i,1,d", 0 },
-{ "xorcc",      0x80980000, 0x41600000, "1,2,d", 0 },
-{ "xorcc",     0x80982000, 0x41600000, "1,i,d", 0 },
-{ "xorcc",     0x80982000, 0x41600000, "i,1,d", 0 },
-{ "xnor",       0x80380000, 0x41c00000, "1,2,d", 0 },
-{ "xnor",      0x80382000, 0x41c00000, "1,i,d", 0 },
-{ "xnor",      0x80382000, 0x41c00000, "i,1,d", 0 },
-{ "xor",        0x80180000, 0x41e00000, "1,2,d", 0 },
-{ "xor",       0x80182000, 0x41e00000, "1,i,d", 0 },
-{ "xor",       0x80182000, 0x41e00000, "i,1,d", 0 },
-
-{ "not",        0x80380000, 0x41c00000, "r", F_ALIAS }, /* xnor rd,%0,rd */
-{ "not",        0x80380000, 0x41c00000, "1,d", F_ALIAS }, /* xnor rs1,%0,rd */
-
-{ "btog",      0x80180000, 0x41e02000, "2,r", F_ALIAS }, /* xor rd,rs2,rd */
-{ "btog",      0x80182000, 0x41e00000, "i,r", F_ALIAS }, /* xor rd,i,rd */
-
-{ "fpop1",      0x81a00000, 0x40580000, "[1+2],d", 0 },
-{ "fpop2",      0x81a80000, 0x40500000, "[1+2],d", 0 },
-
-/* Someday somebody should give these the same treatment as the branches
-   above.  FIXME someday.  */
-
-{ "fb",         0x31800000, 0xc0400000, ",al", F_DELAYED },
-{ "fb",         0x11800000, 0xc0400000, "l", F_DELAYED },
-{ "fba",        0x31800000, 0xc0400000, ",al", F_DELAYED|F_ALIAS },
-{ "fba",        0x11800000, 0xc0400000, "l", F_DELAYED|F_ALIAS },
-{ "fbn",        0x21800000, 0xc0400000, ",al", F_DELAYED },
-{ "fbn",        0x01800000, 0xc0400000, "l", F_DELAYED },
-{ "fbu",        0x2f800000, 0xc0400000, ",al", F_DELAYED },
-{ "fbu",        0x0f800000, 0xc0400000, "l", F_DELAYED },
-{ "fbg",        0x2d800000, 0xc0400000, ",al", F_DELAYED },
-{ "fbg",        0x0d800000, 0xc0400000, "l", F_DELAYED },
-{ "fbug",       0x2b800000, 0xc0400000, ",al", F_DELAYED },
-{ "fbug",       0x0b800000, 0xc0400000, "l", F_DELAYED },
-{ "fbl",        0x29800000, 0xc0400000, ",al", F_DELAYED },
-{ "fbl",        0x09800000, 0xc0400000, "l", F_DELAYED },
-{ "fbul",       0x27800000, 0xc0400000, ",al", F_DELAYED },
-{ "fbul",       0x07800000, 0xc0400000, "l", F_DELAYED },
-{ "fblg",       0x25800000, 0xc0400000, ",al", F_DELAYED },
-{ "fblg",       0x05800000, 0xc0400000, "l", F_DELAYED },
-{ "fbne",       0x23800000, 0xc0400000, ",al", F_DELAYED },
-{ "fbne",       0x03800000, 0xc0400000, "l", F_DELAYED },
-{ "fbe",        0x33800000, 0xc0400000, ",al", F_DELAYED },
-{ "fbe",        0x13800000, 0xc0400000, "l", F_DELAYED },
-{ "fbue",       0x35800000, 0xc0400000, ",al", F_DELAYED },
-{ "fbue",       0x15800000, 0xc0400000, "l", F_DELAYED },
-{ "fbge",       0x37800000, 0xc0400000, ",al", F_DELAYED },
-{ "fbge",       0x17800000, 0xc0400000, "l", F_DELAYED },
-{ "fbuge",      0x39800000, 0xc0400000, ",al", F_DELAYED },
-{ "fbuge",      0x19800000, 0xc0400000, "l", F_DELAYED },
-{ "fble",       0x3b800000, 0xc0400000, ",al", F_DELAYED },
-{ "fble",       0x1b800000, 0xc0400000, "l", F_DELAYED },
-{ "fbule",      0x3d800000, 0xc0400000, ",al", F_DELAYED },
-{ "fbule",      0x1d800000, 0xc0400000, "l", F_DELAYED },
-{ "fbo",        0x3f800000, 0xc0400000, ",al", F_DELAYED },
-{ "fbo",        0x1f800000, 0xc0400000, "l", F_DELAYED },
-
-{ "cba",        0x31c00000, 0xce000000, ",al", F_DELAYED },
-{ "cba",        0x11c00000, 0xce000000, "l", F_DELAYED },
-{ "cbn",        0x21c00000, 0xde000000, ",al", F_DELAYED },
-{ "cbn",        0x01c00000, 0xde000000, "l", F_DELAYED },
-{ "cb3",        0x2fc00000, 0xc0000000, ",al", F_DELAYED },
-{ "cb3",        0x0fc00000, 0xc0000000, "l", F_DELAYED },
-{ "cb2",        0x2dc00000, 0xc0000000, ",al", F_DELAYED },
-{ "cb2",        0x0dc00000, 0xc0000000, "l", F_DELAYED },
-{ "cb23",       0x2bc00000, 0xc0000000, ",al", F_DELAYED },
-{ "cb23",       0x0bc00000, 0xc0000000, "l", F_DELAYED },
-{ "cb1",        0x29c00000, 0xc0000000, ",al", F_DELAYED },
-{ "cb1",        0x09c00000, 0xc0000000, "l", F_DELAYED },
-{ "cb13",       0x27c00000, 0xc0000000, ",al", F_DELAYED },
-{ "cb13",       0x07c00000, 0xc0000000, "l", F_DELAYED },
-{ "cb12",       0x25c00000, 0xc0000000, ",al", F_DELAYED },
-{ "cb12",       0x05c00000, 0xc0000000, "l", F_DELAYED },
-{ "cb123",      0x23c00000, 0xc0000000, ",al", F_DELAYED },
-{ "cb123",      0x03c00000, 0xc0000000, "l", F_DELAYED },
-{ "cb0",        0x33c00000, 0xc0000000, ",al", F_DELAYED },
-{ "cb0",        0x13c00000, 0xc0000000, "l", F_DELAYED },
-{ "cb03",       0x35c00000, 0xc0000000, ",al", F_DELAYED },
-{ "cb03",       0x15c00000, 0xc0000000, "l", F_DELAYED },
-{ "cb02",       0x37c00000, 0xc0000000, ",al", F_DELAYED },
-{ "cb02",       0x17c00000, 0xc0000000, "l", F_DELAYED },
-{ "cb023",      0x39c00000, 0xc0000000, ",al", F_DELAYED },
-{ "cb023",      0x19c00000, 0xc0000000, "l", F_DELAYED },
-{ "cb01",       0x3bc00000, 0xc0000000, ",al", F_DELAYED },
-{ "cb01",       0x1bc00000, 0xc0000000, "l", F_DELAYED },
-{ "cb013",      0x3dc00000, 0xc0000000, ",al", F_DELAYED },
-{ "cb013",      0x1dc00000, 0xc0000000, "l", F_DELAYED },
-{ "cb012",      0x3fc00000, 0xc0000000, ",al", F_DELAYED },
-{ "cb012",      0x1fc00000, 0xc0000000, "l", F_DELAYED },
-
-{ "fstoi",      0x81a01a20, 0x400025c0, "f,g", 0 },
-{ "fdtoi",      0x81a01a40, 0x400025a0, "f,g", 0 },
-{ "fxtoi",      0x81a01a60, 0x40002580, "f,g", 0 },
-
-{ "fitox",      0x81a01980, 0x40002660, "f,g", 0 },
-{ "fitod",      0x81a01900, 0x400026e0, "f,g", 0 },
-{ "fitos",      0x81a01880, 0x40002660, "f,g", 0 },
-
-{ "fstod",      0x81a01920, 0x400026c0, "f,g", 0 },
-{ "fstox",      0x81a019a0, 0x40002640, "f,g", 0 },
-{ "fdtos",      0x81a018c0, 0x40002720, "f,g", 0 },
-{ "fdtox",      0x81a019c0, 0x40002620, "f,g", 0 },
-{ "fxtos",      0x81a018e0, 0x40002700, "f,g", 0 },
-{ "fxtod",      0x81a01960, 0x40002680, "f,g", 0 },
-
-{ "fdivx",      0x81a009e0, 0x40083600, "e,f,g", 0 },
-{ "fdivd",      0x81a009c0, 0x40003620, "e,f,g", 0 },
-{ "fdivs",      0x81a009a0, 0x40003640, "e,f,g", 0 },
-
-{ "fmuls",      0x81a00920, 0x400036c0, "e,f,g", 0 },
-{ "fmuld",      0x81a00940, 0x400036a0, "e,f,g", 0 },
-{ "fmulx",      0x81a00960, 0x40003680, "e,f,g", 0 },
-
-{ "fsqrts",     0x81a00520, 0x40003ac0, "f,g", 0 },
-{ "fsqrtd",     0x81a00540, 0x40003aa8, "f,g", 0 },
-{ "fsqrtx",     0x81a00560, 0x40003a80, "f,g", 0 },
-
-{ "fabss",      0x81a00120, 0x40003ec0, "f,g", 0 },
-{ "fnegs",      0x81a000a0, 0x40003f40, "f,g", 0 },
-{ "fmovs",      0x81a00020, 0x40003fc0, "f,g", 0 },
-
-{ "fsubx",      0x81a008e0, 0x40003700, "e,f,g", 0 },
-{ "fsubd",      0x81a008c0, 0x40003720, "e,f,g", 0 },
-{ "fsubs",      0x81a008a0, 0x40003740, "e,f,g", 0 },
-
-{ "faddx",      0x81a00860, 0x40003780, "e,f,g", 0 },
-{ "faddd",      0x81a00840, 0x400037a0, "e,f,g", 0 },
-{ "fadds",      0x81a00820, 0x400037c0, "e,f,g", 0 },
-
-{ "fcmpex",     0x81a80ae0, 0x40003500, "e,f", 0 },
-{ "fcmped",     0x81a80ac0, 0x40003520, "e,f", 0 },
-{ "fcmpes",     0x81a80aa0, 0x40003540, "e,f", 0 },
-{ "fcmpx",      0x81a80a60, 0x40003580, "e,f", 0 },
-{ "fcmpd",      0x81a80a40, 0x400035a0, "e,f", 0 },
-{ "fcmps",      0x81a80a20, 0x400035c0, "e,f", 0 },
-
-{ "cpop1",      0x81b00000, 0x40480000, "[1+2],d", 0 },
-{ "cpop2",      0x81b80000, 0x40400000, "[1+2],d", 0 },
-};
-
-#define NUMOPCODES ((sizeof sparc_opcodes)/(sizeof sparc_opcodes[0]))
-
diff --git a/gdb/sparc-xdep.c b/gdb/sparc-xdep.c
deleted file mode 100644 (file)
index a040bf5..0000000
+++ /dev/null
@@ -1,302 +0,0 @@
-/* Host-dependent code for SPARC host systems, for GDB, the GNU debugger.
-   Copyright 1986, 1987, 1989, 1990, 1991, 1992 Free Software Foundation, Inc.
-
-This file is part of GDB.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-/* This code only compiles when we have the definitions in tm-sparc.h.  */
-
-#define        TM_FILE_OVERRIDE
-#include "defs.h"
-#include "tm-sparc.h"
-
-#include "inferior.h"
-#include "target.h"
-
-#include <sys/param.h>
-#include <sys/ptrace.h>
-#include <machine/reg.h>
-
-#include "gdbcore.h"
-#include <sys/core.h>
-
-/* We don't store all registers immediately when requested, since they
-   get sent over in large chunks anyway.  Instead, we accumulate most
-   of the changes and send them over once.  "deferred_stores" keeps
-   track of which sets of registers we have locally-changed copies of,
-   so we only need send the groups that have changed.  */
-
-#define        INT_REGS        1
-#define        STACK_REGS      2
-#define        FP_REGS         4
-
-/* The variable deferred_stores itself is defined in sparc-tdep.c.  */
-
-/* Fetch one or more registers from the inferior.  REGNO == -1 to get
-   them all.  We actually fetch more than requested, when convenient,
-   marking them as valid so we won't fetch them again.  */
-void
-fetch_inferior_registers (regno)
-     int regno;
-{
-  struct regs inferior_registers;
-  struct fp_status inferior_fp_registers;
-  int i;
-
-  /* We should never be called with deferred stores, because a prerequisite
-     for writing regs is to have fetched them all (PREPARE_TO_STORE), sigh.  */
-  if (deferred_stores) abort();
-
-  DO_DEFERRED_STORES;
-
-  /* Global and Out regs are fetched directly, as well as the control
-     registers.  If we're getting one of the in or local regs,
-     and the stack pointer has not yet been fetched,
-     we have to do that first, since they're found in memory relative
-     to the stack pointer.  */
-  if (regno < O7_REGNUM  /* including -1 */
-      || regno >= Y_REGNUM
-      || (!register_valid[SP_REGNUM] && regno < I7_REGNUM))
-    {
-      if (0 != ptrace (PTRACE_GETREGS, inferior_pid,
-                      (PTRACE_ARG3_TYPE) &inferior_registers, 0))
-       perror("ptrace_getregs");
-      
-      registers[REGISTER_BYTE (0)] = 0;
-      memcpy (&registers[REGISTER_BYTE (1)], &inferior_registers.r_g1,
-             15 * REGISTER_RAW_SIZE (G0_REGNUM));
-      *(int *)&registers[REGISTER_BYTE (PS_REGNUM)] = inferior_registers.r_ps; 
-      *(int *)&registers[REGISTER_BYTE (PC_REGNUM)] = inferior_registers.r_pc;
-      *(int *)&registers[REGISTER_BYTE (NPC_REGNUM)] = inferior_registers.r_npc;
-      *(int *)&registers[REGISTER_BYTE (Y_REGNUM)] = inferior_registers.r_y;
-
-      for (i = G0_REGNUM; i <= O7_REGNUM; i++)
-       register_valid[i] = 1;
-      register_valid[Y_REGNUM] = 1;
-      register_valid[PS_REGNUM] = 1;
-      register_valid[PC_REGNUM] = 1;
-      register_valid[NPC_REGNUM] = 1;
-      /* If we don't set these valid, read_register_bytes() rereads
-        all the regs every time it is called!  FIXME.  */
-      register_valid[WIM_REGNUM] = 1;  /* Not true yet, FIXME */
-      register_valid[TBR_REGNUM] = 1;  /* Not true yet, FIXME */
-      register_valid[FPS_REGNUM] = 1;  /* Not true yet, FIXME */
-      register_valid[CPS_REGNUM] = 1;  /* Not true yet, FIXME */
-    }
-
-  /* Floating point registers */
-  if (regno == -1 || (regno >= FP0_REGNUM && regno <= FP0_REGNUM + 31))
-    {
-      if (0 != ptrace (PTRACE_GETFPREGS, inferior_pid,
-                      (PTRACE_ARG3_TYPE) &inferior_fp_registers,
-                      0))
-           perror("ptrace_getfpregs");
-      memcpy (&registers[REGISTER_BYTE (FP0_REGNUM)], &inferior_fp_registers,
-             sizeof inferior_fp_registers.fpu_fr);
-      /* bcopy (&inferior_fp_registers.Fpu_fsr,
-            &registers[REGISTER_BYTE (FPS_REGNUM)],
-            sizeof (FPU_FSR_TYPE));  FIXME???  -- gnu@cyg */
-      for (i = FP0_REGNUM; i <= FP0_REGNUM+31; i++)
-       register_valid[i] = 1;
-      register_valid[FPS_REGNUM] = 1;
-    }
-
-  /* These regs are saved on the stack by the kernel.  Only read them
-     all (16 ptrace calls!) if we really need them.  */
-  if (regno == -1)
-    {
-      target_xfer_memory (*(CORE_ADDR*)&registers[REGISTER_BYTE (SP_REGNUM)],
-                         &registers[REGISTER_BYTE (L0_REGNUM)],
-                         16*REGISTER_RAW_SIZE (L0_REGNUM), 0);
-      for (i = L0_REGNUM; i <= I7_REGNUM; i++)
-       register_valid[i] = 1;
-    }
-  else if (regno >= L0_REGNUM && regno <= I7_REGNUM)
-    {
-      CORE_ADDR sp = *(CORE_ADDR*)&registers[REGISTER_BYTE (SP_REGNUM)];
-      i = REGISTER_BYTE (regno);
-      if (register_valid[regno])
-       printf("register %d valid and read\n", regno);
-      target_xfer_memory (sp + i - REGISTER_BYTE (L0_REGNUM),
-                         &registers[i], REGISTER_RAW_SIZE (regno), 0);
-      register_valid[regno] = 1;
-    }
-}
-
-/* Store our register values back into the inferior.
-   If REGNO is -1, do this for all registers.
-   Otherwise, REGNO specifies which register (so we can save time).  */
-
-void
-store_inferior_registers (regno)
-     int regno;
-{
-  struct regs inferior_registers;
-  struct fp_status inferior_fp_registers;
-  int wanna_store = INT_REGS + STACK_REGS + FP_REGS;
-
-  /* First decide which pieces of machine-state we need to modify.  
-     Default for regno == -1 case is all pieces.  */
-  if (regno >= 0)
-    if (FP0_REGNUM <= regno && regno < FP0_REGNUM + 32)
-      {
-       wanna_store = FP_REGS;
-      }
-    else 
-      {
-       if (regno == SP_REGNUM)
-         wanna_store = INT_REGS + STACK_REGS;
-       else if (regno < L0_REGNUM || regno > I7_REGNUM)
-         wanna_store = INT_REGS;
-       else
-         wanna_store = STACK_REGS;
-      }
-
-  /* See if we're forcing the stores to happen now, or deferring. */
-  if (regno == -2)
-    {
-      wanna_store = deferred_stores;
-      deferred_stores = 0;
-    }
-  else
-    {
-      if (wanna_store == STACK_REGS)
-       {
-         /* Fall through and just store one stack reg.  If we deferred
-            it, we'd have to store them all, or remember more info.  */
-       }
-      else
-       {
-         deferred_stores |= wanna_store;
-         return;
-       }
-    }
-
-  if (wanna_store & STACK_REGS)
-    {
-      CORE_ADDR sp = *(CORE_ADDR *)&registers[REGISTER_BYTE (SP_REGNUM)];
-
-      if (regno < 0 || regno == SP_REGNUM)
-       {
-         if (!register_valid[L0_REGNUM+5]) abort();
-         target_xfer_memory (sp, 
-                             &registers[REGISTER_BYTE (L0_REGNUM)],
-                             16*REGISTER_RAW_SIZE (L0_REGNUM), 1);
-       }
-      else
-       {
-         if (!register_valid[regno]) abort();
-         target_xfer_memory (sp + REGISTER_BYTE (regno) - REGISTER_BYTE (L0_REGNUM),
-                             &registers[REGISTER_BYTE (regno)],
-                             REGISTER_RAW_SIZE (regno), 1);
-       }
-       
-    }
-
-  if (wanna_store & INT_REGS)
-    {
-      if (!register_valid[G1_REGNUM]) abort();
-
-      memcpy (&inferior_registers.r_g1, &registers[REGISTER_BYTE (G1_REGNUM)],
-             15 * REGISTER_RAW_SIZE (G1_REGNUM));
-
-      inferior_registers.r_ps =
-       *(int *)&registers[REGISTER_BYTE (PS_REGNUM)];
-      inferior_registers.r_pc =
-       *(int *)&registers[REGISTER_BYTE (PC_REGNUM)];
-      inferior_registers.r_npc =
-       *(int *)&registers[REGISTER_BYTE (NPC_REGNUM)];
-      inferior_registers.r_y =
-       *(int *)&registers[REGISTER_BYTE (Y_REGNUM)];
-
-      if (0 != ptrace (PTRACE_SETREGS, inferior_pid,
-                      (PTRACE_ARG3_TYPE) &inferior_registers, 0))
-       perror("ptrace_setregs");
-    }
-
-  if (wanna_store & FP_REGS)
-    {
-      if (!register_valid[FP0_REGNUM+9]) abort();
-      memcpy (&inferior_fp_registers, &registers[REGISTER_BYTE (FP0_REGNUM)],
-             sizeof inferior_fp_registers.fpu_fr);
-
-/*    memcpy (&inferior_fp_registers.Fpu_fsr, 
-             &registers[REGISTER_BYTE (FPS_REGNUM)], sizeof (FPU_FSR_TYPE));
-****/
-      if (0 !=
-        ptrace (PTRACE_SETFPREGS, inferior_pid,
-                (PTRACE_ARG3_TYPE) &inferior_fp_registers, 0))
-        perror("ptrace_setfpregs");
-    }
-}
-\f
-void
-fetch_core_registers (core_reg_sect, core_reg_size, which, ignore)
-  char *core_reg_sect;
-  unsigned core_reg_size;
-  int which;
-  unsigned int ignore; /* reg addr, unused in this version */
-{
-
-  if (which == 0) {
-
-    /* Integer registers */
-
-#define gregs ((struct regs *)core_reg_sect)
-    /* G0 *always* holds 0.  */
-    *(int *)&registers[REGISTER_BYTE (0)] = 0;
-
-    /* The globals and output registers.  */
-    memcpy (&registers[REGISTER_BYTE (G1_REGNUM)], &gregs->r_g1, 
-           15 * REGISTER_RAW_SIZE (G1_REGNUM));
-    *(int *)&registers[REGISTER_BYTE (PS_REGNUM)] = gregs->r_ps;
-    *(int *)&registers[REGISTER_BYTE (PC_REGNUM)] = gregs->r_pc;
-    *(int *)&registers[REGISTER_BYTE (NPC_REGNUM)] = gregs->r_npc;
-    *(int *)&registers[REGISTER_BYTE (Y_REGNUM)] = gregs->r_y;
-
-    /* My best guess at where to get the locals and input
-       registers is exactly where they usually are, right above
-       the stack pointer.  If the core dump was caused by a bus error
-       from blowing away the stack pointer (as is possible) then this
-       won't work, but it's worth the try. */
-    {
-      int sp;
-
-      sp = *(int *)&registers[REGISTER_BYTE (SP_REGNUM)];
-      if (0 != target_read_memory (sp, &registers[REGISTER_BYTE (L0_REGNUM)], 
-                         16 * REGISTER_RAW_SIZE (L0_REGNUM)))
-       {
-         /* fprintf so user can still use gdb */
-         fprintf (stderr,
-                  "Couldn't read input and local registers from core file\n");
-       }
-    }
-  } else if (which == 2) {
-
-    /* Floating point registers */
-
-#define fpuregs  ((struct fpu *) core_reg_sect)
-    if (core_reg_size >= sizeof (struct fpu))
-      {
-       memcpy (&registers[REGISTER_BYTE (FP0_REGNUM)], fpuregs->fpu_regs,
-               sizeof (fpuregs->fpu_regs));
-       memcpy (&registers[REGISTER_BYTE (FPS_REGNUM)], &fpuregs->fpu_fsr,
-               sizeof (FPU_FSR_TYPE));
-      }
-    else
-      fprintf (stderr, "Couldn't read float regs from core file\n");
-  }
-}
diff --git a/gdb/stab.def b/gdb/stab.def
deleted file mode 100755 (executable)
index 58364e1..0000000
+++ /dev/null
@@ -1,182 +0,0 @@
-/* Table of DBX symbol codes for the GNU system.
-   Copyright (C) 1988 Free Software Foundation, Inc.
-
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 1, or (at your option)
-   any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software
-   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
-\f
-/* Global variable.  Only the name is significant.
-   To find the address, look in the corresponding external symbol.  */
-__define_stab (N_GSYM, 0x20, "GSYM")
-
-/* Function name for BSD Fortran.  Only the name is significant.
-   To find the address, look in the corresponding external symbol.  */
-__define_stab (N_FNAME, 0x22, "FNAME")
-
-/* Function name or text-segment variable for C.  Value is its address.
-   Desc is supposedly starting line number, but GCC doesn't set it
-   and DBX seems not to miss it.  */
-__define_stab (N_FUN, 0x24, "FUN")
-
-/* Data-segment variable with internal linkage.  Value is its address.  */
-__define_stab (N_STSYM, 0x26, "STSYM")
-
-/* BSS-segment variable with internal linkage.  Value is its address.  */
-__define_stab (N_LCSYM, 0x28, "LCSYM")
-
-/* Name of main routine.  Only the name is significant.
-   This is not used in C.  */
-__define_stab (N_MAIN, 0x2a, "MAIN")
-
-/* Register variable.  Value is number of register.  */
-__define_stab (N_RSYM, 0x40, "RSYM")
-
-/* Structure or union element.  Value is offset in the structure.  */
-__define_stab (N_SSYM, 0x60, "SSYM")
-
-/* Parameter variable.  Value is offset from argument pointer.
-   (On most machines the argument pointer is the same as the frame pointer.  */
-__define_stab (N_PSYM, 0xa0, "PSYM")
-
-/* Automatic variable in the stack.  Value is offset from frame pointer.
-   Also used for type descriptions.  */
-__define_stab (N_LSYM, 0x80, "LSYM")
-
-/* Alternate entry point.  Value is its address.  */
-__define_stab (N_ENTRY, 0xa4, "ENTRY")
-
-/* Name of main source file.
-   Value is starting text address of the compilation.  */
-__define_stab (N_SO, 0x64, "SO")
-
-/* Name of sub-source file.
-   Value is starting text address of the compilation.  */
-__define_stab (N_SOL, 0x84, "SOL")
-
-/* Line number in text segment.  Desc is the line number;
-   value is corresponding address.  */
-__define_stab (N_SLINE, 0x44, "SLINE")
-/* Similar, for data segment.  */
-__define_stab (N_DSLINE, 0x66, "DSLINE")
-/* Similar, for bss segment.  */
-__define_stab (N_BSLINE, 0x68, "BSLINE")
-
-/* Beginning of an include file.  Only Sun uses this.
-   In an object file, only the name is significant.
-   The Sun linker puts data into some of the other fields.  */
-__define_stab (N_BINCL, 0x82, "BINCL")
-/* End of an include file.  No name.
-   These two act as brackets around the file's output.
-   In an object file, there is no significant data in this entry.
-   The Sun linker puts data into some of the fields.  */
-__define_stab (N_EINCL, 0xa2, "EINCL")
-/* Place holder for deleted include file.
-   This appears only in output from the Sun linker.  */
-__define_stab (N_EXCL, 0xc2, "EXCL")
-
-/* Beginning of lexical block.
-   The desc is the nesting level in lexical blocks.
-   The value is the address of the start of the text for the block.
-   The variables declared inside the block *precede* the N_LBRAC symbol.  */
-__define_stab (N_LBRAC, 0xc0, "LBRAC")
-/* End of a lexical block.  Desc matches the N_LBRAC's desc.
-   The value is the address of the end of the text for the block.  */
-__define_stab (N_RBRAC, 0xe0, "RBRAC")
-
-/* Begin named common block.  Only the name is significant.  */
-__define_stab (N_BCOMM, 0xe2, "BCOMM")
-/* Begin named common block.  Only the name is significant
-   (and it should match the N_BCOMM).  */
-__define_stab (N_ECOMM, 0xe4, "ECOMM")
-/* End common (local name): value is address.
-   I'm not sure how this is used.  */
-__define_stab (N_ECOML, 0xe8, "ECOML")
-/* Second symbol entry containing a length-value for the preceding entry.
-   The value is the length.  */
-__define_stab (N_LENG, 0xfe, "LENG")
-
-/* Global symbol in Pascal.
-   Supposedly the value is its line number; I'm skeptical.  */
-__define_stab (N_PC, 0x30, "PC")
-
-/* Modula-2 compilation unit.  Can someone say what info it contains?  */
-__define_stab (N_M2C, 0x42, "M2C")
-/* Modula-2 scope information.  Can someone say what info it contains?  */
-__define_stab (N_SCOPE, 0xc4, "SCOPE")
-
-/* Sun's source-code browser stabs.  ?? Don't know what the fields are.
-   Supposedly the field is "path to associated .cb file".  */
-__define_stab (N_BROWS, 0x48, "BROWS")
-
-/* GNU C++ exception stabs.  */
-
-/* GNU C++ exception variable.  Name is variable name.  */
-__define_stab (N_EHDECL, 0x50, "EHDECL")
-
-/* GNU C++ `catch' clause.  Value is its address.  Desc is nonzero if
-   this entry is immediately followed by a CAUGHT stab saying what exception
-   was caught.  Multiple CAUGHT stabs means that multiple exceptions
-   can be caught here.  If Desc is 0, it means all exceptions are caught
-   here.  */
-__define_stab (N_CATCH, 0x54, "CATCH")
-
-/* These STAB's are used on Gould systems for Non-Base register symbols
-   or something like that.  FIXME.  I have assigned the values at random
-   since I don't have a Gould here.  Fixups from Gould folk welcome... */
-__define_stab (N_NBTEXT, 0xF0, "NBTEXT")
-__define_stab (N_NBDATA, 0xF2, "NBDATA")
-__define_stab (N_NBBSS,  0xF4, "NBBSS")
-__define_stab (N_NBSTS,  0xF6, "NBSTS")
-__define_stab (N_NBLCS,  0xF8, "NBLCS")
-__define_stab (N_NSYMS,  0xFA, "NSYMS")
-\f
-/* The above information, in matrix format.
-
-                       STAB MATRIX
-       _________________________________________________
-       | 00 - 1F are not dbx stab symbols              |
-       | Entries with bits 01 set are external symbols |
-       | N_UNDEF   | N_ABS     | N_TEXT    | N_DATA    |
-       | N_BSS     | N_COMM    |           | N_FN      |
-       |_______________________________________________|
-       | 20 GSYM   | 22 FNAME  | 24 FUN    | 26 STSYM  |
-       | 28 LCSYM  | 2A MAIN   | 2C        | 2E        |
-       | 30 PC     | 32        | 34        | 36        |
-       | 38        | 3A        | 3C        | 3E        |
-       | 40 RSYM   | 42 M2C    | 44 SLINE  | 46        |
-       | 48 BROWS  | 4A        | 4C        | 4E        |
-       | 50 EHDECL | 52        | 54 CATCH  | 56        |
-       | 58        | 5A        | 5C        | 5E        |
-       | 60 SSYM   | 62        | 64 SO     | 66 DSLINE |
-       | 68 BSLINE | 6A        | 6C        | 6E        |
-       | 70        | 72        | 74        | 76        |
-       | 78        | 7A        | 7C        | 7E        |
-       | 80 LSYM   | 82 BINCL  | 84 SOL    | 86        |
-       | 88        | 8A        | 8C        | 8E        |
-       | 90        | 92        | 94        | 96        |
-       | 98        | 9A        | 9C        | 9E        |
-       | A0 PSYM   | A2 EINCL  | A4 ENTRY  | A6        |
-       | A8        | AA        | AC        | AE        |
-       | B0        | B2        | B4        | B6        |
-       | B8        | BA        | BC        | BE        |
-       | C0 LBRAC  | C2 EXCL   | C4 SCOPE  | C6        |
-       | C8        | CA        | CC        | CE        |
-       | D0        | D2        | D4        | D6        |
-       | D8        | DA        | DC        | DE        |
-       | E0 RBRAC  | E2 BCOMM  | E4 ECOMM  | E6        |
-       | E8 ECOML  | EA        | EC        | EE        |
-       | F0        | F2        | F4        | F6        |
-       | F8        | FA        | FC        | FE LENG   |
-       +-----------------------------------------------+
-
-*/
diff --git a/gdb/stddef.h b/gdb/stddef.h
deleted file mode 100755 (executable)
index c2c396e..0000000
+++ /dev/null
@@ -1,26 +0,0 @@
-#ifndef _STDDEF_H
-#define _STDDEF_H
-
-/* Signed type of difference of two pointers.  */
-
-typedef long ptrdiff_t;
-
-/* Unsigned type of `sizeof' something.  */
-
-/* in case <sys/types.h> has defined it. */
-/* DECstation uses _SIZE_T_.  */
-#if !defined (_SIZE_T) && !defined (_SIZE_T_)
-#define _SIZE_T
-typedef unsigned long size_t;
-#endif /* _SIZE_T */
-
-/* A null pointer constant.  */
-
-#undef NULL            /* in case <stdio.h> has defined it. */
-#define NULL 0
-
-/* Offset of member MEMBER in a struct of type TYPE.  */
-
-#define offsetof(TYPE, MEMBER) ((size_t) &((TYPE *)0)->MEMBER)
-
-#endif /* _STDDEF_H */
diff --git a/gdb/stdlib.h b/gdb/stdlib.h
deleted file mode 100755 (executable)
index 40ce167..0000000
+++ /dev/null
@@ -1,10 +0,0 @@
-/* Fake stdlib.h supplying the stuff needed by malloc. */
-
-#ifndef __ONEFILE
-#include <stddef.h>
-#endif
-
-extern void EXFUN(abort, (void));
-extern void EXFUN(free, (PTR));
-extern PTR EXFUN(malloc, (size_t));
-extern PTR EXFUN(realloc, (PTR, size_t));
diff --git a/gdb/sun3-xdep.c b/gdb/sun3-xdep.c
deleted file mode 100644 (file)
index 03cc3ae..0000000
+++ /dev/null
@@ -1,167 +0,0 @@
-/* Host-dependent code for Sun-3 for GDB, the GNU debugger.
-   Copyright 1986, 1987, 1989, 1991 Free Software Foundation, Inc.
-
-This file is part of GDB.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-#include "defs.h"
-#include "inferior.h"
-#include "gdbcore.h"
-
-#include <sys/ptrace.h>
-#define KERNEL         /* To get floating point reg definitions */
-#include <machine/reg.h>
-
-extern int errno;
-
-#if defined (GDB_TARGET_IS_SUN3)
-/* All of this stuff is only relevant if both host and target are sun3.  */
-void
-fetch_inferior_registers (regno)
-     int regno;
-{
-  struct regs inferior_registers;
-#ifdef FP0_REGNUM
-  struct fp_status inferior_fp_registers;
-#endif
-  extern char registers[];
-
-  registers_fetched ();
-  
-  ptrace (PTRACE_GETREGS, inferior_pid,
-         (PTRACE_ARG3_TYPE) &inferior_registers);
-#ifdef FP0_REGNUM
-  ptrace (PTRACE_GETFPREGS, inferior_pid,
-         (PTRACE_ARG3_TYPE) &inferior_fp_registers);
-#endif 
-  
-  bcopy (&inferior_registers, registers, 16 * 4);
-#ifdef FP0_REGNUM
-  bcopy (&inferior_fp_registers, &registers[REGISTER_BYTE (FP0_REGNUM)],
-        sizeof inferior_fp_registers.fps_regs);
-#endif 
-  *(int *)&registers[REGISTER_BYTE (PS_REGNUM)] = inferior_registers.r_ps;
-  *(int *)&registers[REGISTER_BYTE (PC_REGNUM)] = inferior_registers.r_pc;
-#ifdef FP0_REGNUM
-  bcopy (&inferior_fp_registers.fps_control,
-        &registers[REGISTER_BYTE (FPC_REGNUM)],
-        sizeof inferior_fp_registers - sizeof inferior_fp_registers.fps_regs);
-#endif 
-}
-
-/* Store our register values back into the inferior.
-   If REGNO is -1, do this for all registers.
-   Otherwise, REGNO specifies which register (so we can save time).  */
-
-void
-store_inferior_registers (regno)
-     int regno;
-{
-  struct regs inferior_registers;
-#ifdef FP0_REGNUM
-  struct fp_status inferior_fp_registers;
-#endif
-  extern char registers[];
-
-  bcopy (registers, &inferior_registers, 16 * 4);
-#ifdef FP0_REGNUM
-  bcopy (&registers[REGISTER_BYTE (FP0_REGNUM)], &inferior_fp_registers,
-        sizeof inferior_fp_registers.fps_regs);
-#endif
-  inferior_registers.r_ps = *(int *)&registers[REGISTER_BYTE (PS_REGNUM)];
-  inferior_registers.r_pc = *(int *)&registers[REGISTER_BYTE (PC_REGNUM)];
-
-#ifdef FP0_REGNUM
-  bcopy (&registers[REGISTER_BYTE (FPC_REGNUM)],
-        &inferior_fp_registers.fps_control,
-        sizeof inferior_fp_registers - sizeof inferior_fp_registers.fps_regs);
-#endif
-
-  ptrace (PTRACE_SETREGS, inferior_pid,
-         (PTRACE_ARG3_TYPE) &inferior_registers);
-#if FP0_REGNUM
-  ptrace (PTRACE_SETFPREGS, inferior_pid,
-         (PTRACE_ARG3_TYPE) &inferior_fp_registers);
-#endif
-}
-
-/* Machine-dependent code for pulling registers out of a Sun-3 core file. */
-
-void
-fetch_core_registers (core_reg_sect, core_reg_size, which, reg_addr)
-     char *core_reg_sect;
-     unsigned core_reg_size;
-     int which;
-     unsigned int reg_addr;    /* Unused in this version */
-{
-  extern char registers[];
-  struct regs *regs = (struct regs *) core_reg_sect;
-
-  if (which == 0) {
-    if (core_reg_size < sizeof (struct regs))
-      error ("Can't find registers in core file");
-
-    bcopy ((char *)regs, registers, 16 * 4);
-    supply_register (PS_REGNUM, (char *)&regs->r_ps);
-    supply_register (PC_REGNUM, (char *)&regs->r_pc);
-
-  } else if (which == 2) {
-
-#define fpustruct  ((struct fpu *) core_reg_sect)
-
-    if (core_reg_size >= sizeof (struct fpu))
-      {
-#ifdef FP0_REGNUM
-       bcopy (fpustruct->f_fpstatus.fps_regs,
-             &registers[REGISTER_BYTE (FP0_REGNUM)],
-             sizeof fpustruct->f_fpstatus.fps_regs);
-       bcopy (&fpustruct->f_fpstatus.fps_control,
-             &registers[REGISTER_BYTE (FPC_REGNUM)],
-             sizeof fpustruct->f_fpstatus - 
-               sizeof fpustruct->f_fpstatus.fps_regs);
-#endif
-      }
-    else
-      fprintf (stderr, "Couldn't read float regs from core file\n");
-  }
-}
-#else /* Not sun3 target.  */
-/* These functions shouldn't be called when we're cross-debugging.  */
-
-/* ARGSUSED */
-void
-fetch_inferior_registers (regno)
-     int regno;
-{
-}
-
-/* ARGSUSED */
-void
-store_inferior_registers (regno)
-     int regno;
-{
-}
-
-/* ARGSUSED */
-void
-fetch_core_registers (core_reg_sect, core_reg_size, which, reg_addr)
-     char *core_reg_sect;
-     unsigned core_reg_size;
-     int which;
-     unsigned int reg_addr;    /* Unused in this version */
-{
-}
-#endif /* Not sun3 target.  */
diff --git a/gdb/sun386-xdep.c b/gdb/sun386-xdep.c
deleted file mode 100644 (file)
index 7da605b..0000000
+++ /dev/null
@@ -1,289 +0,0 @@
-/* Machine-dependent code for host Sun 386i's for GDB, the GNU debugger.
-   Copyright (C) 1986, 1987, 1989, 1991 Free Software Foundation, Inc.
-   Changes for sun386i by Jean Daniel Fekete (jdf@litp.univ-p6-7.fr),
-   C2V Paris, April 89.
-
-This file is part of GDB.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-#if defined (GDB_TARGET_IS_SUN386)
-
-#include "defs.h"
-#include "frame.h"
-#include "inferior.h"
-#include "gdbcore.h"
-
-#include <sys/param.h>
-#include <sys/dir.h>
-#include <sys/user.h>
-#include <signal.h>
-#include <sys/ioctl.h>
-#include <fcntl.h>
-
-#include <sys/ptrace.h>
-#include <machine/reg.h>
-
-#include <sys/file.h>
-#include <sys/stat.h>
-#include <sys/core.h>
-
-\f
-void
-fetch_inferior_registers (regno)
-     int regno;
-{
-  struct regs inferior_registers;
-  struct fp_state inferior_fp_registers;
-  extern char registers[];
-
-  registers_fetched ();
-
-  ptrace (PTRACE_GETREGS, inferior_pid,
-         (PTRACE_ARG3_TYPE) &inferior_registers);
-  ptrace (PTRACE_GETFPREGS, inferior_pid,
-         (PTRACE_ARG3_TYPE) &inferior_fp_registers);
-
-  bcopy (&inferior_registers, registers, sizeof inferior_registers);
-
-  bcopy (inferior_fp_registers.f_st,&registers[REGISTER_BYTE (FP0_REGNUM)],
-        sizeof inferior_fp_registers.f_st);
-  bcopy (&inferior_fp_registers.f_ctrl,
-        &registers[REGISTER_BYTE (FPC_REGNUM)],
-        sizeof inferior_fp_registers - sizeof inferior_fp_registers.f_st);
-}
-
-/* Store our register values back into the inferior.
-   If REGNO is -1, do this for all registers.
-   Otherwise, REGNO specifies which register (so we can save time).  */
-
-void
-store_inferior_registers (regno)
-     int regno;
-{
-  struct regs inferior_registers;
-  struct fp_state inferior_fp_registers;
-  extern char registers[];
-
-  bcopy (registers, &inferior_registers, 20 * 4);
-
-  bcopy (&registers[REGISTER_BYTE (FP0_REGNUM)],inferior_fp_registers.f_st,
-        sizeof inferior_fp_registers.f_st);
-  bcopy (&registers[REGISTER_BYTE (FPC_REGNUM)],
-        &inferior_fp_registers.f_ctrl,
-        sizeof inferior_fp_registers - sizeof inferior_fp_registers.f_st);
-  
-#ifdef PTRACE_FP_BUG
-  if (regno == FP_REGNUM || regno == -1)
-    /* Storing the frame pointer requires a gross hack, in which an
-       instruction that moves eax into ebp gets single-stepped.  */
-    {
-      int stack = inferior_registers.r_reg[SP_REGNUM];
-      int stuff = ptrace (PTRACE_PEEKDATA, inferior_pid,
-                         (PTRACE_ARG3_TYPE) stack);
-      int reg = inferior_registers.r_reg[EAX];
-      inferior_registers.r_reg[EAX] =
-       inferior_registers.r_reg[FP_REGNUM];
-      ptrace (PTRACE_SETREGS, inferior_pid, 
-             (PTRACE_ARG3_TYPE) &inferior_registers);
-      ptrace (PTRACE_POKEDATA, inferior_pid, (PTRACE_ARG3_TYPE) stack,
-             0xc589);
-      ptrace (PTRACE_SINGLESTEP, inferior_pid, (PTRACE_ARG3_TYPE) stack,
-             0);
-      wait (0);
-      ptrace (PTRACE_POKEDATA, inferior_pid, (PTRACE_ARG3_TYPE) stack,
-             stuff);
-      inferior_registers.r_reg[EAX] = reg;
-    }
-#endif
-  ptrace (PTRACE_SETREGS, inferior_pid,
-         (PTRACE_ARG3_TYPE) &inferior_registers);
-  ptrace (PTRACE_SETFPREGS, inferior_pid,
-         (PTRACE_ARG3_TYPE) &inferior_fp_registers);
-}
-
-/* Machine-dependent code which would otherwise be in core.c */
-/* Work with core files, for GDB. */
-
-\f
-void
-core_file_command (filename, from_tty)
-     char *filename;
-     int from_tty;
-{
-  int val;
-  extern char registers[];
-
-  /* Discard all vestiges of any previous core file
-     and mark data and stack spaces as empty.  */
-
-  if (corefile)
-    free (corefile);
-  corefile = 0;
-
-  if (corechan >= 0)
-    close (corechan);
-  corechan = -1;
-
-  data_start = 0;
-  data_end = 0;
-  stack_start = STACK_END_ADDR;
-  stack_end = STACK_END_ADDR;
-
-  /* Now, if a new core file was specified, open it and digest it.  */
-
-  if (filename)
-    {
-      filename = tilde_expand (filename);
-      make_cleanup (free, filename);
-      
-      if (have_inferior_p ())
-       error ("To look at a core file, you must kill the inferior with \"kill\".");
-      corechan = open (filename, O_RDONLY, 0);
-      if (corechan < 0)
-       perror_with_name (filename);
-
-      {
-       struct core corestr;
-
-       val = myread (corechan, &corestr, sizeof corestr);
-       if (val < 0)
-         perror_with_name (filename);
-       if (corestr.c_magic != CORE_MAGIC)
-         error ("\"%s\" does not appear to be a core dump file (magic 0x%x, expected 0x%x)",
-                filename, corestr.c_magic, (int) CORE_MAGIC);
-       else if (sizeof (struct core) != corestr.c_len)
-         error ("\"%s\" has an invalid struct core length (%d, expected %d)",
-                filename, corestr.c_len, (int) sizeof (struct core));
-
-       data_start = exec_data_start;
-       data_end = data_start + corestr.c_dsize;
-       stack_start = stack_end - corestr.c_ssize;
-       data_offset = sizeof corestr;
-       stack_offset = sizeof corestr + corestr.c_dsize;
-
-       bcopy (&corestr.c_regs, registers, sizeof corestr.c_regs);
-
-       bcopy (corestr.c_fpu.f_fpstatus.f_st,
-              &registers[REGISTER_BYTE (FP0_REGNUM)],
-              sizeof corestr.c_fpu.f_fpstatus.f_st);
-       bcopy (&corestr.c_fpu.f_fpstatus.f_ctrl,
-              &registers[REGISTER_BYTE (FPC_REGNUM)],
-              sizeof corestr.c_fpu.f_fpstatus -
-              sizeof corestr.c_fpu.f_fpstatus.f_st);
-
-       /* the struct aouthdr of sun coff is not the struct exec stored
-          in the core file. */
-       bcopy (&corestr.c_aouthdr, &core_aouthdr, sizeof (struct exec));
-#ifndef COFF_ENCAPSULATE
-       core_aouthdr.magic = corestr.c_aouthdr.a_info;
-       core_aouthdr.vstamp = /*SUNVERSION*/ 31252;
-#endif
-       printf ("Core file is from \"%s\".\n", corestr.c_cmdname);
-       if (corestr.c_signo > 0)
-         printf ("Program terminated with signal %d, %s.\n",
-                 corestr.c_signo, safe_strsignal (corestr.c_signo));
-      }
-      if (filename[0] == '/')
-       corefile = savestring (filename, strlen (filename));
-      else
-       {
-         corefile = concat (current_directory, "/", filename, NULL);
-       }
-
-      set_current_frame ( create_new_frame (read_register (FP_REGNUM),
-                                           read_pc ()));
-      select_frame (get_current_frame (), 0);
-
-      validate_files ();
-    }
-  else if (from_tty)
-    printf ("No core file now.\n");
-}
-
-i387_to_double (from, to)
-     char *from;
-     char *to;
-{
-  long *lp;
-  /* push extended mode on 387 stack, then pop in double mode
-   *
-   * first, set exception masks so no error is generated -
-   * number will be rounded to inf or 0, if necessary 
-   */
-  asm ("pushl %eax");          /* grab a stack slot */
-  asm ("fstcw (%esp)");                /* get 387 control word */
-  asm ("movl (%esp),%eax");    /* save old value */
-  asm ("orl $0x3f,%eax");              /* mask all exceptions */
-  asm ("pushl %eax");
-  asm ("fldcw (%esp)");                /* load new value into 387 */
-  
-  asm ("movl 8(%ebp),%eax");
-  asm ("fldt (%eax)");         /* push extended number on 387 stack */
-  asm ("fwait");
-  asm ("movl 12(%ebp),%eax");
-  asm ("fstpl (%eax)");                /* pop double */
-  asm ("fwait");
-  
-  asm ("popl %eax");           /* flush modified control word */
-  asm ("fnclex");                      /* clear exceptions */
-  asm ("fldcw (%esp)");                /* restore original control word */
-  asm ("popl %eax");           /* flush saved copy */
-}
-
-double_to_i387 (from, to)
-     char *from;
-     char *to;
-{
-  /* push double mode on 387 stack, then pop in extended mode
-   * no errors are possible because every 64-bit pattern
-   * can be converted to an extended
-   */
-  asm ("movl 8(%ebp),%eax");
-  asm ("fldl (%eax)");
-  asm ("fwait");
-  asm ("movl 12(%ebp),%eax");
-  asm ("fstpt (%eax)");
-  asm ("fwait");
-}
-#else /* Not sun386 target.  */
-
-/* These functions shouldn't be called when we're cross-debugging.  */
-
-/* ARGSUSED */
-void
-fetch_inferior_registers (regno)
-     int regno;
-{
-}
-
-/* ARGSUSED */
-void
-store_inferior_registers (regno)
-     int regno;
-{
-}
-
-/* ARGSUSED */
-void
-fetch_core_registers (core_reg_sect, core_reg_size, which, reg_addr)
-     char *core_reg_sect;
-     unsigned core_reg_size;
-     int which;
-     unsigned int reg_addr;    /* Unused in this version */
-{
-}
-
-#endif /* Not sun386 target.  */
diff --git a/gdb/symmetry-tdep.c b/gdb/symmetry-tdep.c
deleted file mode 100755 (executable)
index aba21c3..0000000
+++ /dev/null
@@ -1,494 +0,0 @@
-/* Sequent Symmetry target interface, for GDB when running under Unix.
-   Copyright (C) 1986, 1987, 1989, 1991 Free Software Foundation, Inc.
-
-This file is part of GDB.
-
-GDB is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 1, or (at your option)
-any later version.
-
-GDB is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with GDB; see the file COPYING.  If not, write to
-the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-/* many 387-specific items of use taken from i386-dep.c */
-
-#include <stdio.h>
-#include "defs.h"
-#include "param.h"
-#include "frame.h"
-#include "inferior.h"
-#include "symtab.h"
-
-#include <signal.h>
-#include <sys/param.h>
-#include <sys/user.h>
-#include <sys/dir.h>
-#include <sys/ioctl.h>
-#include <sys/stat.h>
-#include "gdbcore.h"
-#include <fcntl.h>
-
-static long i386_get_frame_setup ();
-static i386_follow_jump ();
-
-#include <sgtty.h>
-#define TERMINAL struct sgttyb
-
-exec_file_command (filename, from_tty)
-     char *filename;
-     int from_tty;
-{
-  int val;
-
-  /* Eliminate all traces of old exec file.
-     Mark text segment as empty.  */
-
-  if (execfile)
-    free (execfile);
-  execfile = 0;
-  data_start = 0;
-  data_end -= exec_data_start;
-  text_start = 0;
-  text_end = 0;
-  exec_data_start = 0;
-  exec_data_end = 0;
-  if (execchan >= 0)
-    close (execchan);
-  execchan = -1;
-
-  /* Now open and digest the file the user requested, if any.  */
-
-  if (filename)
-    {
-      filename = tilde_expand (filename);
-      make_cleanup (free, filename);
-      
-      execchan = openp (getenv ("PATH"), 1, filename, O_RDONLY, 0,
-                       &execfile);
-      if (execchan < 0)
-       perror_with_name (filename);
-
-#ifdef COFF_FORMAT
-      {
-       int aout_hdrsize;
-       int num_sections;
-
-       if (read_file_hdr (execchan, &file_hdr) < 0)
-         error ("\"%s\": not in executable format.", execfile);
-
-       aout_hdrsize = file_hdr.f_opthdr;
-       num_sections = file_hdr.f_nscns;
-
-       if (read_aout_hdr (execchan, &exec_aouthdr, aout_hdrsize) < 0)
-         error ("\"%s\": can't read optional aouthdr", execfile);
-
-       if (read_section_hdr (execchan, _TEXT, &text_hdr, num_sections,
-                             aout_hdrsize) < 0)
-         error ("\"%s\": can't read text section header", execfile);
-
-       if (read_section_hdr (execchan, _DATA, &data_hdr, num_sections,
-                             aout_hdrsize) < 0)
-         error ("\"%s\": can't read data section header", execfile);
-
-       text_start = exec_aouthdr.text_start;
-       text_end = text_start + exec_aouthdr.tsize;
-       text_offset = text_hdr.s_scnptr;
-       exec_data_start = exec_aouthdr.data_start;
-       exec_data_end = exec_data_start + exec_aouthdr.dsize;
-       exec_data_offset = data_hdr.s_scnptr;
-       data_start = exec_data_start;
-       data_end += exec_data_start;
-       exec_mtime = file_hdr.f_timdat;
-      }
-#else /* not COFF_FORMAT */
-      {
-       struct stat st_exec;
-
-       val = myread (execchan, &exec_aouthdr, sizeof (AOUTHDR));
-
-       if (val < 0)
-         perror_with_name (filename);
-
-       text_start = N_ADDRADJ(exec_aouthdr);
-        exec_data_start = round(exec_aouthdr.a_text, NBPG*CLSIZE);
-       text_offset = N_TXTOFF (exec_aouthdr);
-       exec_data_offset = N_TXTOFF (exec_aouthdr) + exec_aouthdr.a_text;
-       text_end = exec_aouthdr.a_text;
-        exec_data_end = exec_data_start + exec_aouthdr.a_data;
-       data_start = exec_data_start;
-       data_end = data_start + exec_aouthdr.a_data;
-       exec_data_offset = N_TXTOFF(exec_aouthdr);
-       fstat (execchan, &st_exec);
-       exec_mtime = st_exec.st_mtime;
-      }
-#endif /* not COFF_FORMAT */
-
-      validate_files ();
-    }
-  else if (from_tty)
-    printf ("No exec file now.\n");
-
-  /* Tell display code (if any) about the changed file name.  */
-  if (exec_file_display_hook)
-    (*exec_file_display_hook) (filename);
-}
-
-/* rounds 'one' up to divide evenly by 'two' */
-
-int
-round(one,two)
-register int one, two;
-
-{
-    register int temp;
-    temp = (one/two)*two;
-    if (one != temp) {
-       temp += two;
-    }
-    return temp;
-}
-
-
-static CORE_ADDR codestream_next_addr;
-static CORE_ADDR codestream_addr;
-static unsigned char codestream_buf[sizeof (int)];
-static int codestream_off;
-static int codestream_cnt;
-
-#define codestream_tell() (codestream_addr + codestream_off)
-#define codestream_peek() (codestream_cnt == 0 ? \
-                          codestream_fill(1): codestream_buf[codestream_off])
-#define codestream_get() (codestream_cnt-- == 0 ? \
-                        codestream_fill(0) : codestream_buf[codestream_off++])
-
-
-static unsigned char 
-codestream_fill (peek_flag)
-{
-  codestream_addr = codestream_next_addr;
-  codestream_next_addr += sizeof (int);
-  codestream_off = 0;
-  codestream_cnt = sizeof (int);
-  read_memory (codestream_addr,
-              (unsigned char *)codestream_buf,
-              sizeof (int));
-  
-  if (peek_flag)
-    return (codestream_peek());
-  else
-    return (codestream_get());
-}
-
-static void
-codestream_seek (place)
-{
-  codestream_next_addr = place & -sizeof (int);
-  codestream_cnt = 0;
-  codestream_fill (1);
-  while (codestream_tell() != place)
-    codestream_get ();
-}
-
-static void
-codestream_read (buf, count)
-     unsigned char *buf;
-{
-  unsigned char *p;
-  int i;
-  p = buf;
-  for (i = 0; i < count; i++)
-    *p++ = codestream_get ();
-}
-
-/*
- * Following macro translates i386 opcode register numbers to Symmetry
- * register numbers.  This is used by FRAME_FIND_SAVED_REGS.
- *
- *           %eax  %ecx  %edx  %ebx  %esp  %ebp  %esi  %edi
- * i386        0     1     2     3     4     5     6     7
- * Symmetry    0     2     1     5    14    15     6     7
- *
- */
-#define I386_REGNO_TO_SYMMETRY(n) \
-((n)==0?0 :(n)==1?2 :(n)==2?1 :(n)==3?5 :(n)==4?14 :(n)==5?15 :(n))
-
-/* from i386-dep.c */
-i386_frame_find_saved_regs (fip, fsrp)
-     struct frame_info *fip;
-     struct frame_saved_regs *fsrp;
-{
-  unsigned long locals;
-  unsigned char *p;
-  unsigned char op;
-  CORE_ADDR dummy_bottom;
-  CORE_ADDR adr;
-  int i;
-  
-  bzero (fsrp, sizeof *fsrp);
-  
-  /* if frame is the end of a dummy, compute where the
-   * beginning would be
-   */
-  dummy_bottom = fip->frame - 4 - NUM_REGS*4 - CALL_DUMMY_LENGTH;
-  
-  /* check if the PC is in the stack, in a dummy frame */
-  if (dummy_bottom <= fip->pc && fip->pc <= fip->frame) 
-    {
-      /* all regs were saved by push_call_dummy () */
-      adr = fip->frame - 4;
-      for (i = 0; i < NUM_REGS; i++) 
-       {
-         fsrp->regs[i] = adr;
-         adr -= 4;
-       }
-      return;
-    }
-  
-  locals = i386_get_frame_setup (get_pc_function_start (fip->pc));
-  
-  if (locals >= 0) 
-    {
-      adr = fip->frame - 4 - locals;
-      for (i = 0; i < 8; i++) 
-       {
-         op = codestream_get ();
-         if (op < 0x50 || op > 0x57)
-           break;
-         fsrp->regs[I386_REGNO_TO_SYMMETRY(op - 0x50)] = adr;
-         adr -= 4;
-       }
-    }
-  
-  fsrp->regs[PC_REGNUM] = fip->frame + 4;
-  fsrp->regs[FP_REGNUM] = fip->frame;
-}
-
-static long
-i386_get_frame_setup (pc)
-{
-  unsigned char op;
-  
-  codestream_seek (pc);
-  
-  i386_follow_jump ();
-  
-  op = codestream_get ();
-  
-  if (op == 0x58) /* popl %eax */
-    {
-      /*
-       * this function must start with
-       * 
-       *    popl %eax            0x58
-       *    xchgl %eax, (%esp)  0x87 0x04 0x24
-       * or xchgl %eax, 0(%esp) 0x87 0x44 0x24 0x00
-       *
-       * (the system 5 compiler puts out the second xchg
-       * inst, and the assembler doesn't try to optimize it,
-       * so the 'sib' form gets generated)
-       * 
-       * this sequence is used to get the address of the return
-       * buffer for a function that returns a structure
-       */
-      int pos;
-      unsigned char buf[4];
-      static unsigned char proto1[3] = { 0x87,0x04,0x24 };
-      static unsigned char proto2[4] = { 0x87,0x44,0x24,0x00 };
-      pos = codestream_tell ();
-      codestream_read (buf, 4);
-      if (bcmp (buf, proto1, 3) == 0)
-       pos += 3;
-      else if (bcmp (buf, proto2, 4) == 0)
-       pos += 4;
-      
-      codestream_seek (pos);
-      op = codestream_get (); /* update next opcode */
-    }
-  
-  if (op == 0x55)                      /* pushl %esp */
-    {
-      if (codestream_get () != 0x8b)   /* movl %esp, %ebp (2bytes) */
-       return (-1);
-      if (codestream_get () != 0xec)
-       return (-1);
-      /*
-       * check for stack adjustment 
-       *
-       *  subl $XXX, %esp
-       *
-       * note: you can't subtract a 16 bit immediate
-       * from a 32 bit reg, so we don't have to worry
-       * about a data16 prefix 
-       */
-      op = codestream_peek ();
-      if (op == 0x83)  /* subl with 8 bit immed */
-       {
-         codestream_get ();
-         if (codestream_get () != 0xec)
-           return (-1);
-         /* subl with signed byte immediate 
-          * (though it wouldn't make sense to be negative)
-          */
-         return (codestream_get());
-       }
-      else if (op == 0x81)  /* subl with 32 bit immed */
-       {
-         int locals;
-         if (codestream_get () != 0xec)
-           return (-1);
-         /* subl with 32 bit immediate */
-         codestream_read ((unsigned char *)&locals, 4);
-         return (locals);
-       } 
-      else 
-       {
-         return (0);
-       }
-    } 
-  else if (op == 0xc8) 
-    {
-      /* enter instruction: arg is 16 unsigned immed */
-      unsigned short slocals;
-      codestream_read ((unsigned char *)&slocals, 2);
-      codestream_get (); /* flush final byte of enter instruction */
-      return (slocals);
-    }
-  return (-1);
-}
-
-/* next instruction is a jump, move to target */
-static
-i386_follow_jump ()
-{
-  int long_delta;
-  short short_delta;
-  char byte_delta;
-  int data16;
-  int pos;
-  
-  pos = codestream_tell ();
-  
-  data16 = 0;
-  if (codestream_peek () == 0x66)
-    {
-      codestream_get ();
-      data16 = 1;
-    }
-  
-  switch (codestream_get ())
-    {
-    case 0xe9:
-      /* relative jump: if data16 == 0, disp32, else disp16 */
-      if (data16)
-       {
-         codestream_read ((unsigned char *)&short_delta, 2);
-         pos += short_delta + 3; /* include size of jmp inst */
-       }
-      else
-       {
-         codestream_read ((unsigned char *)&long_delta, 4);
-         pos += long_delta + 5;
-       }
-      break;
-    case 0xeb:
-      /* relative jump, disp8 (ignore data16) */
-      codestream_read ((unsigned char *)&byte_delta, 1);
-      pos += byte_delta + 2;
-      break;
-    }
-  codestream_seek (pos + data16);
-}
-
-/* return pc of first real instruction */
-/* from i386-dep.c */
-
-i386_skip_prologue (pc)
-{
-  unsigned char op;
-  int i;
-  
-  if (i386_get_frame_setup (pc) < 0)
-    return (pc);
-  
-  /* found valid frame setup - codestream now points to 
-   * start of push instructions for saving registers
-   */
-  
-  /* skip over register saves */
-  for (i = 0; i < 8; i++)
-    {
-      op = codestream_peek ();
-      /* break if not pushl inst */
-      if (op < 0x50 || op > 0x57) 
-       break;
-      codestream_get ();
-    }
-  
-  i386_follow_jump ();
-  
-  return (codestream_tell ());
-}
-
-symmetry_extract_return_value(type, regbuf, valbuf)
-     struct type *type;
-     char *regbuf;
-     char *valbuf;
-{
-  union { 
-    double     d; 
-    int        l[2]; 
-  } xd; 
-  int i;
-  float f;
-
-  if (TYPE_CODE_FLT == TYPE_CODE(type)) { 
-    for (i = 0; i < misc_function_count; i++) {
-      if (!strcmp(misc_function_vector[i].name, "1167_flt"))
-       break;
-    }
-    if (i < misc_function_count) {
-      /* found "1167_flt" means 1167, %fp2-%fp3 */ 
-      /* float & double; 19= %fp2, 20= %fp3 */
-      /* no single precision on 1167 */
-      xd.l[1] = *((int *)&regbuf[REGISTER_BYTE(19)]);
-      xd.l[0] = *((int *)&regbuf[REGISTER_BYTE(20)]);
-      switch (TYPE_LENGTH(type)) {
-      case 4:
-       f = (float) xd.d;
-       bcopy(&f, valbuf, TYPE_LENGTH(type));
-       break;
-      case 8:
-       bcopy(&xd.d, valbuf, TYPE_LENGTH(type)); 
-       break;
-      default:
-       error("Unknown floating point size");
-       break;
-      }
-    } else { 
-      /* 387 %st(0), gcc uses this */ 
-      i387_to_double(((int *)&regbuf[REGISTER_BYTE(3)]),
-                    &xd.d); 
-      switch (TYPE_LENGTH(type)) {
-      case 4:                  /* float */
-       f = (float) xd.d;
-       bcopy(&f, valbuf, 4); 
-       break;
-      case 8:                  /* double */
-       bcopy(&xd.d, valbuf, 8);
-       break;
-      default:
-       error("Unknown floating point size");
-       break;
-      }
-    }
-  } else { 
-    bcopy (regbuf, valbuf, TYPE_LENGTH (type)); 
-  }
-}
diff --git a/gdb/symmetry-xdep.c b/gdb/symmetry-xdep.c
deleted file mode 100755 (executable)
index 3449678..0000000
+++ /dev/null
@@ -1,557 +0,0 @@
-/* Sequent Symmetry host interface, for GDB when running under Unix.
-   Copyright (C) 1986, 1987, 1989, 1991 Free Software Foundation, Inc.
-
-This file is part of GDB.
-
-GDB is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 1, or (at your option)
-any later version.
-
-GDB is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with GDB; see the file COPYING.  If not, write to
-the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-/* many 387-specific items of use taken from i386-dep.c */
-
-#include <stdio.h>
-#include "defs.h"
-#include "param.h"
-#include "frame.h"
-#include "inferior.h"
-#include "symtab.h"
-
-#include <signal.h>
-#include <sys/param.h>
-#include <sys/user.h>
-#include <sys/dir.h>
-#include <sys/ioctl.h>
-#include <sys/stat.h>
-#include "gdbcore.h"
-#include <fcntl.h>
-
-static long i386_get_frame_setup ();
-static i386_follow_jump ();
-
-#include <sgtty.h>
-#define TERMINAL struct sgttyb
-
-store_inferior_registers(regno)
-int regno;
-{
-  struct pt_regset regs;
-  int reg_tmp, i;
-  extern char registers[];
-  
-#if 0
-  /* PREPARE_TO_STORE deals with this.  */
-  if (-1 == regno)
-    {
-#endif
-      regs.pr_eax = *(int *)&registers[REGISTER_BYTE(0)];
-      regs.pr_ebx = *(int *)&registers[REGISTER_BYTE(5)];
-      regs.pr_ecx = *(int *)&registers[REGISTER_BYTE(2)];
-      regs.pr_edx = *(int *)&registers[REGISTER_BYTE(1)];
-      regs.pr_esi = *(int *)&registers[REGISTER_BYTE(6)];
-      regs.pr_edi = *(int *)&registers[REGISTER_BYTE(7)];
-      regs.pr_esp = *(int *)&registers[REGISTER_BYTE(14)];
-      regs.pr_ebp = *(int *)&registers[REGISTER_BYTE(15)];
-      regs.pr_eip = *(int *)&registers[REGISTER_BYTE(16)];
-      regs.pr_flags = *(int *)&registers[REGISTER_BYTE(17)];
-      for (i = 0; i < 31; i++) {
-       regs.pr_fpa.fpa_regs[i] =
-         *(int *)&registers[REGISTER_BYTE(FP1_REGNUM+i)];
-      }
-#if 0
-    }
-  else
-    {
-      reg_tmp = *(int *)&registers[REGISTER_BYTE(regno)];
-      ptrace(XPT_RREGS, inferior_pid, &regs, 0);
-      switch (regno)
-       {
-       case 0:
-         regs.pr_eax = *(int *)&registers[REGISTER_BYTE(0)];
-         break;
-       case 5:
-         regs.pr_ebx = *(int *)&registers[REGISTER_BYTE(5)];
-         break;
-       case 2:
-         regs.pr_ecx = *(int *)&registers[REGISTER_BYTE(2)];
-         break;
-       case 1:
-         regs.pr_edx = *(int *)&registers[REGISTER_BYTE(1)];
-         break;
-       case 6:
-         regs.pr_esi = *(int *)&registers[REGISTER_BYTE(6)];
-         break;
-       case 7:
-         regs.pr_edi = *(int *)&registers[REGISTER_BYTE(7)];
-         break;
-       case 15:
-         regs.pr_ebp = *(int *)&registers[REGISTER_BYTE(15)];
-         break;
-       case 14:
-         regs.pr_esp = *(int *)&registers[REGISTER_BYTE(14)];
-         break;
-       case 16:
-         regs.pr_eip = *(int *)&registers[REGISTER_BYTE(16)];
-         break;
-       case 17:
-         regs.pr_flags = *(int *)&registers[REGISTER_BYTE(17)];
-         break;
-       }
-    }
-#endif /* 0 */
-  ptrace(XPT_WREGS, inferior_pid, &regs, 0);
-}
-
-void
-fetch_inferior_registers()
-{
-    int i;
-    struct pt_regset regs;
-    extern char registers[];
-
-    registers_fetched ();
-    
-    ptrace(XPT_RREGS, inferior_pid, &regs, 0);
-    *(int *)&registers[REGISTER_BYTE(0)] = regs.pr_eax;
-    *(int *)&registers[REGISTER_BYTE(5)] = regs.pr_ebx;
-    *(int *)&registers[REGISTER_BYTE(2)] = regs.pr_ecx;
-    *(int *)&registers[REGISTER_BYTE(1)] = regs.pr_edx;
-    *(int *)&registers[REGISTER_BYTE(6)] = regs.pr_esi;
-    *(int *)&registers[REGISTER_BYTE(7)] = regs.pr_edi;
-    *(int *)&registers[REGISTER_BYTE(15)] = regs.pr_ebp;
-    *(int *)&registers[REGISTER_BYTE(14)] = regs.pr_esp;
-    *(int *)&registers[REGISTER_BYTE(16)] = regs.pr_eip;
-    *(int *)&registers[REGISTER_BYTE(17)] = regs.pr_flags;
-    for (i = 0; i < FPA_NREGS; i++) {
-       *(int *)&registers[REGISTER_BYTE(FP1_REGNUM+i)] = regs.pr_fpa.fpa_regs[i];
-    }
-    bcopy(regs.pr_fpu.fpu_stack[0], &registers[REGISTER_BYTE(3)], 10);
-    bcopy(regs.pr_fpu.fpu_stack[1], &registers[REGISTER_BYTE(4)], 10);
-    bcopy(regs.pr_fpu.fpu_stack[2], &registers[REGISTER_BYTE(8)], 10);
-    bcopy(regs.pr_fpu.fpu_stack[3], &registers[REGISTER_BYTE(9)], 10);
-    bcopy(regs.pr_fpu.fpu_stack[4], &registers[REGISTER_BYTE(10)], 10);
-    bcopy(regs.pr_fpu.fpu_stack[5], &registers[REGISTER_BYTE(11)], 10);
-    bcopy(regs.pr_fpu.fpu_stack[6], &registers[REGISTER_BYTE(12)], 10);
-    bcopy(regs.pr_fpu.fpu_stack[7], &registers[REGISTER_BYTE(13)], 10);
-}
-
-\f
-/* Work with core dump and executable files, for GDB. 
-   This code would be in core.c if it weren't machine-dependent. */
-
-#include "gdbcore.h"
-
-void
-core_file_command (filename, from_tty)
-     char *filename;
-     int from_tty;
-{
-  int val;
-  extern char registers[];
-
-  /* Discard all vestiges of any previous core file
-     and mark data and stack spaces as empty.  */
-
-  if (corefile)
-    free (corefile);
-  corefile = 0;
-
-  if (corechan >= 0)
-    close (corechan);
-  corechan = -1;
-
-  data_start = 0;
-  data_end = 0;
-  stack_start = STACK_END_ADDR;
-  stack_end = STACK_END_ADDR;
-
-  /* Now, if a new core file was specified, open it and digest it.  */
-
-  if (filename)
-    {
-      filename = tilde_expand (filename);
-      make_cleanup (free, filename);
-      
-      if (have_inferior_p ())
-       error ("To look at a core file, you must kill the inferior with \"kill\".");
-      corechan = open (filename, O_RDONLY, 0);
-      if (corechan < 0)
-       perror_with_name (filename);
-      /* 4.2-style (and perhaps also sysV-style) core dump file.  */
-      {
-       struct user u;
-       int reg_offset;
-
-       val = myread (corechan, &u, sizeof u);
-       if (val < 0)
-         perror_with_name (filename);
-       data_start = exec_data_start;
-
-       data_end = data_start + NBPG * (u.u_dsize - u.u_tsize);
-       stack_start = stack_end - NBPG * u.u_ssize;
-       data_offset = NBPG * UPAGES;
-       stack_offset = ctob(UPAGES + u.u_dsize - u.u_tsize);
-       reg_offset = (int) u.u_ar0 - KERNEL_U_ADDR;
-printf("u.u_tsize= %#x, u.u_dsize= %#x, u.u_ssize= %#x, stack_off= %#x\n",
-       u.u_tsize, u.u_dsize, u.u_ssize, stack_offset);
-
-       core_aouthdr.a_magic = 0;
-
-       /* Read the register values out of the core file and store
-          them where `read_register' will find them.  */
-
-       {
-         register int regno;
-
-         for (regno = 0; regno < NUM_REGS; regno++)
-           {
-             char buf[MAX_REGISTER_RAW_SIZE];
-
-             val = lseek (corechan, register_addr (regno, reg_offset), 0);
-             if (val < 0)
-               perror_with_name (filename);
-
-             val = myread (corechan, buf, sizeof buf);
-             if (val < 0)
-               perror_with_name (filename);
-             supply_register (regno, buf);
-           }
-       }
-      }
-      if (filename[0] == '/')
-       corefile = savestring (filename, strlen (filename));
-      else
-       {
-         corefile = concat (current_directory, "/", filename);
-       }
-
-      set_current_frame(create_new_frame(read_register(FP_REGNUM),
-                                        read_pc()));
-/*      set_current_frame (read_register (FP_REGNUM));*/
-      select_frame (get_current_frame (), 0);
-      validate_files ();
-    }
-  else if (from_tty)
-    printf ("No core file now.\n");
-}
-
-/* from i386-dep.c */
-static
-print_387_control_word (control)
-unsigned short control;
-{
-  printf ("control 0x%04x: ", control);
-  printf ("compute to ");
-  switch ((control >> 8) & 3) 
-    {
-    case 0: printf ("24 bits; "); break;
-    case 1: printf ("(bad); "); break;
-    case 2: printf ("53 bits; "); break;
-    case 3: printf ("64 bits; "); break;
-    }
-  printf ("round ");
-  switch ((control >> 10) & 3) 
-    {
-    case 0: printf ("NEAREST; "); break;
-    case 1: printf ("DOWN; "); break;
-    case 2: printf ("UP; "); break;
-    case 3: printf ("CHOP; "); break;
-    }
-  if (control & 0x3f) 
-    {
-      printf ("mask:");
-      if (control & 0x0001) printf (" INVALID");
-      if (control & 0x0002) printf (" DENORM");
-      if (control & 0x0004) printf (" DIVZ");
-      if (control & 0x0008) printf (" OVERF");
-      if (control & 0x0010) printf (" UNDERF");
-      if (control & 0x0020) printf (" LOS");
-      printf (";");
-    }
-  printf ("\n");
-  if (control & 0xe080) printf ("warning: reserved bits on 0x%x\n",
-                               control & 0xe080);
-}
-
-static
-print_387_status_word (status)
-     unsigned short status;
-{
-  printf ("status %#04x: ", status);
-  if (status & 0xff) {
-      printf ("exceptions:");  /* exception names match <machine/fpu.h> */
-      if (status & 0x0001) printf (" FLTINV");
-      if (status & 0x0002) printf (" FLTDEN");
-      if (status & 0x0004) printf (" FLTDIV");
-      if (status & 0x0008) printf (" FLTOVF");
-      if (status & 0x0010) printf (" FLTUND");
-      if (status & 0x0020) printf (" FLTPRE");
-      if (status & 0x0040) printf (" FLTSTK");
-      printf ("; ");
-    }
-  printf ("flags: %d%d%d%d; ",
-         (status & 0x4000) != 0,
-         (status & 0x0400) != 0,
-         (status & 0x0200) != 0,
-         (status & 0x0100) != 0);
-  
-  printf ("top %d\n", (status >> 11) & 7);
-}
-
-static
-print_fpu_status(ep)
-struct pt_regset ep;
-
-{
-    int i;
-    int bothstatus;
-    int top;
-    int fpreg;
-    unsigned char *p;
-    
-    printf("80387:");
-    if (ep.pr_fpu.fpu_ip == 0) {
-       printf(" not in use.\n");
-       return;
-    } else {
-       printf("\n");
-    }
-    if (ep.pr_fpu.fpu_status != 0) {
-       print_387_status_word (ep.pr_fpu.fpu_status);
-    }
-    print_387_control_word (ep.pr_fpu.fpu_control);
-    printf ("last exception: ");
-    printf ("opcode 0x%x; ", ep.pr_fpu.fpu_rsvd4);
-    printf ("pc 0x%x:0x%x; ", ep.pr_fpu.fpu_cs, ep.pr_fpu.fpu_ip);
-    printf ("operand 0x%x:0x%x\n", ep.pr_fpu.fpu_data_offset, ep.pr_fpu.fpu_op_sel);
-    
-    top = (ep.pr_fpu.fpu_status >> 11) & 7;
-    
-    printf ("regno  tag  msb              lsb  value\n");
-    for (fpreg = 7; fpreg >= 0; fpreg--) 
-       {
-           double val;
-           
-           printf ("%s %d: ", fpreg == top ? "=>" : "  ", fpreg);
-           
-           switch ((ep.pr_fpu.fpu_tag >> (fpreg * 2)) & 3) 
-               {
-               case 0: printf ("valid "); break;
-               case 1: printf ("zero  "); break;
-               case 2: printf ("trap  "); break;
-               case 3: printf ("empty "); break;
-               }
-           for (i = 9; i >= 0; i--)
-               printf ("%02x", ep.pr_fpu.fpu_stack[fpreg][i]);
-           
-           i387_to_double (ep.pr_fpu.fpu_stack[fpreg], (char *)&val);
-           printf ("  %g\n", val);
-       }
-    if (ep.pr_fpu.fpu_rsvd1)
-       printf ("warning: rsvd1 is 0x%x\n", ep.pr_fpu.fpu_rsvd1);
-    if (ep.pr_fpu.fpu_rsvd2)
-       printf ("warning: rsvd2 is 0x%x\n", ep.pr_fpu.fpu_rsvd2);
-    if (ep.pr_fpu.fpu_rsvd3)
-       printf ("warning: rsvd3 is 0x%x\n", ep.pr_fpu.fpu_rsvd3);
-    if (ep.pr_fpu.fpu_rsvd5)
-       printf ("warning: rsvd5 is 0x%x\n", ep.pr_fpu.fpu_rsvd5);
-}
-
-
-print_1167_control_word(pcr)
-unsigned int pcr;
-
-{
-    int pcr_tmp;
-
-    pcr_tmp = pcr & FPA_PCR_MODE;
-    printf("\tMODE= %#x; RND= %#x ", pcr_tmp, pcr_tmp & 12);
-    switch (pcr_tmp & 12) {
-    case 0:
-       printf("RN (Nearest Value)");
-       break;
-    case 1:
-       printf("RZ (Zero)");
-       break;
-    case 2:
-       printf("RP (Positive Infinity)");
-       break;
-    case 3:
-       printf("RM (Negative Infinity)");
-       break;
-    }
-    printf("; IRND= %d ", pcr_tmp & 2);
-    if (0 == pcr_tmp & 2) {
-       printf("(same as RND)\n");
-    } else {
-       printf("(toward zero)\n");
-    }
-    pcr_tmp = pcr & FPA_PCR_EM;
-    printf("\tEM= %#x", pcr_tmp);
-    if (pcr_tmp & FPA_PCR_EM_DM) printf(" DM");
-    if (pcr_tmp & FPA_PCR_EM_UOM) printf(" UOM");
-    if (pcr_tmp & FPA_PCR_EM_PM) printf(" PM");
-    if (pcr_tmp & FPA_PCR_EM_UM) printf(" UM");
-    if (pcr_tmp & FPA_PCR_EM_OM) printf(" OM");
-    if (pcr_tmp & FPA_PCR_EM_ZM) printf(" ZM");
-    if (pcr_tmp & FPA_PCR_EM_IM) printf(" IM");
-    printf("\n");
-    pcr_tmp = FPA_PCR_CC;
-    printf("\tCC= %#x", pcr_tmp);
-    if (pcr_tmp & FPA_PCR_20MHZ) printf(" 20MHZ");
-    if (pcr_tmp & FPA_PCR_CC_Z) printf(" Z");
-    if (pcr_tmp & FPA_PCR_CC_C2) printf(" C2");
-    if (pcr_tmp & FPA_PCR_CC_C1) printf(" C1");
-    switch (pcr_tmp) {
-    case FPA_PCR_CC_Z:
-       printf(" (Equal)");
-       break;
-    case FPA_PCR_CC_C1:
-       printf(" (Less than)");
-       break;
-    case 0:
-       printf(" (Greater than)");
-       break;
-    case FPA_PCR_CC_Z | FPA_PCR_CC_C1 | FPA_PCR_CC_C2:
-       printf(" (Unordered)");
-       break;
-    default:
-       printf(" (Undefined)");
-       break;
-    }
-    printf("\n");
-    pcr_tmp = pcr & FPA_PCR_AE;
-    printf("\tAE= %#x", pcr_tmp);
-    if (pcr_tmp & FPA_PCR_AE_DE) printf(" DE");
-    if (pcr_tmp & FPA_PCR_AE_UOE) printf(" UOE");
-    if (pcr_tmp & FPA_PCR_AE_PE) printf(" PE");
-    if (pcr_tmp & FPA_PCR_AE_UE) printf(" UE");
-    if (pcr_tmp & FPA_PCR_AE_OE) printf(" OE");
-    if (pcr_tmp & FPA_PCR_AE_ZE) printf(" ZE");
-    if (pcr_tmp & FPA_PCR_AE_EE) printf(" EE");
-    if (pcr_tmp & FPA_PCR_AE_IE) printf(" IE");
-    printf("\n");
-}
-
-print_1167_regs(regs)
-long regs[FPA_NREGS];
-
-{
-    int i;
-
-    union {
-       double  d;
-       long    l[2];
-    } xd;
-    union {
-       float   f;
-       long    l;
-    } xf;
-
-
-    for (i = 0; i < FPA_NREGS; i++) {
-       xf.l = regs[i];
-       printf("%%fp%d: raw= %#x, single= %f", i+1, regs[i], xf.f);
-       if (!(i & 1)) {
-           printf("\n");
-       } else {
-           xd.l[1] = regs[i];
-           xd.l[0] = regs[i+1];
-           printf(", double= %f\n", xd.d);
-       }
-    }
-}
-
-print_fpa_status(ep)
-struct pt_regset ep;
-
-{
-
-    printf("WTL 1167:");
-    if (ep.pr_fpa.fpa_pcr !=0) {
-       printf("\n");
-       print_1167_control_word(ep.pr_fpa.fpa_pcr);
-       print_1167_regs(ep.pr_fpa.fpa_regs);
-    } else {
-       printf(" not in use.\n");
-    }
-}
-
-i386_float_info ()
-
-{
-    char ubuf[UPAGES*NBPG];
-    struct pt_regset regset;
-    extern int corechan;
-    
-    if (have_inferior_p()) {
-       call_ptrace(XPT_RREGS, inferior_pid, &regset, 0);
-    } else {
-       if (lseek (corechan, 0, 0) < 0) {
-           perror ("seek on core file");
-       }
-       if (myread (corechan, ubuf, UPAGES*NBPG) < 0) {
-           perror ("read on core file");
-       }
-       /* only interested in the floating point registers */
-       regset.pr_fpu = ((struct user *) ubuf)->u_fpusave;
-       regset.pr_fpa = ((struct user *) ubuf)->u_fpasave;
-    }
-    print_fpu_status(regset);
-    print_fpa_status(regset);
-}
-
-i387_to_double (from, to)
-     char *from;
-     char *to;
-{
-  long *lp;
-  /* push extended mode on 387 stack, then pop in double mode
-   *
-   * first, set exception masks so no error is generated -
-   * number will be rounded to inf or 0, if necessary 
-   */
-  asm ("pushl %eax");          /* grab a stack slot */
-  asm ("fstcw (%esp)");                /* get 387 control word */
-  asm ("movl (%esp),%eax");    /* save old value */
-  asm ("orl $0x3f,%eax");              /* mask all exceptions */
-  asm ("pushl %eax");
-  asm ("fldcw (%esp)");                /* load new value into 387 */
-  
-  asm ("movl 8(%ebp),%eax");
-  asm ("fldt (%eax)");         /* push extended number on 387 stack */
-  asm ("fwait");
-  asm ("movl 12(%ebp),%eax");
-  asm ("fstpl (%eax)");                /* pop double */
-  asm ("fwait");
-  
-  asm ("popl %eax");           /* flush modified control word */
-  asm ("fnclex");                      /* clear exceptions */
-  asm ("fldcw (%esp)");                /* restore original control word */
-  asm ("popl %eax");           /* flush saved copy */
-}
-
-double_to_i387 (from, to)
-     char *from;
-     char *to;
-{
-  /* push double mode on 387 stack, then pop in extended mode
-   * no errors are possible because every 64-bit pattern
-   * can be converted to an extended
-   */
-  asm ("movl 8(%ebp),%eax");
-  asm ("fldl (%eax)");
-  asm ("fwait");
-  asm ("movl 12(%ebp),%eax");
-  asm ("fstpt (%eax)");
-  asm ("fwait");
-}
diff --git a/gdb/tahoe-opcode.h b/gdb/tahoe-opcode.h
deleted file mode 100755 (executable)
index b5cee24..0000000
+++ /dev/null
@@ -1,213 +0,0 @@
-/*
- * Ported by the State University of New York at Buffalo by the Distributed
- * Computer Systems Lab, Department of Computer Science, 1991.
- */
-
-#ifndef tahoe_opcodeT
-#define tahoe_opcodeT int
-#endif /* no tahoe_opcodeT */
-
-struct vot_wot                  /* tahoe opcode table: wot to do with this */
-                                /* particular opcode */
-{
-  char *            args;       /* how to compile said opcode */
-  tahoe_opcodeT       code;     /* op-code (may be > 8 bits!) */
-};
-
-struct vot                      /* tahoe opcode text */
-{
-  char *            name;       /* opcode name: lowercase string  [key]  */
-  struct vot_wot    detail;     /* rest of opcode table          [datum] */
-};
-
-#define vot_how args
-#define vot_code code
-#define vot_detail detail
-#define vot_name name
-
-static struct vot
-votstrs[] =
-{
-{    "halt",   {"",                    0x00    } },
-{    "sinf",    {"",                    0x05    } },
-{    "ldf",     {"rl",                  0x06    } },
-{    "ldd",     {"rq",                  0x07    } },
-{    "addb2",  {"rbmb",                0x08    } },
-{    "movb",   {"rbwb",                0x09    } },
-{    "addw2",  {"rwmw",                0x0a    } },
-{    "movw",   {"rwww",                0x0b    } },
-{    "addl2",  {"rlml",                0x0c    } },
-{    "movl",   {"rlwl",                0x0d    } },
-{    "bbs",    {"rlvlbw",              0x0e    } },
-{    "nop",     {"",                    0x10    } },
-{    "brb",    {"bb",                  0x11    } },
-{    "brw",    {"bw",                  0x13    } },
-{    "cosf",    {"",                    0x15    } },
-{    "lnf",     {"rl",                  0x16    } },
-{    "lnd",     {"rq",                  0x17    } },
-{    "addb3",  {"rbrbwb",              0x18    } },
-{    "cmpb",   {"rbwb",                0x19    } }, 
-{    "addw3",  {"rwrwww",              0x1a    } },
-{    "cmpw",   {"rwww",                0x1b    } },
-{    "addl3",  {"rlrlwl",              0x1c    } },
-{    "cmpl",   {"rlwl",                0x1d    } },
-{    "bbc",    {"rlvlbw",              0x1e    } },
-{    "rei",    {"",                    0x20    } },
-{    "bneq",   {"bb",                  0x21    } },
-{    "bnequ",  {"bb",                  0x21    } },
-{    "cvtwl",  {"rwwl",                0x23    } },
-{    "stf",     {"wl",                  0x26    } },
-{    "std",     {"wq",                  0x27    } },
-{    "subb2",  {"rbmb",                0x28    } },
-{    "mcomb",  {"rbwb",                0x29    } },
-{    "subw2",  {"rwmw",                0x2a    } },
-{    "mcomw",  {"rwww",                0x2b    } },
-{    "subl2",   {"rlml",                0x2c    } },
-{    "mcoml",   {"rlwl",                0x2d    } },
-{    "emul",   {"rlrlrlwq",            0x2e    } },
-{    "aoblss", {"rlmlbw",              0x2f    } },
-{    "bpt",    {"",                    0x30    } },
-{    "beql",   {"bb",                  0x31    } },
-{    "beqlu",  {"bb",                  0x31    } },
-{    "cvtwb",  {"rwwb",                0x33    } },
-{    "logf",    {"",                    0x35    } },
-{    "cmpf",    {"rl",                  0x36    } },
-{    "cmpd",    {"rq",                  0x37    } },
-{    "subb3",  {"rbrbwb",              0x38    } },
-{    "bitb",   {"rbrb",                0x39    } },
-{    "subw3",  {"rwrwww",              0x3a    } },
-{    "bitw",   {"rwrw",                0x3b    } },
-{    "subl3",  {"rlrlwl",              0x3c    } },
-{    "bitl",   {"rlrl",                0x3d    } },
-{    "ediv",   {"rlrqwlwl",            0x3e    } },
-{    "aobleq", {"rlmlbw",              0x3f    } },
-{    "ret",    {"",                    0x40    } },
-{    "bgtr",   {"bb",                  0x41    } },
-{    "sqrtf",   {"",                    0x45    } },
-{    "cmpf2",   {"rl",                  0x46    } },
-{    "cmpd2",   {"rqrq",                0x47    } },
-{    "shll",    {"rbrlwl",              0x48    } },
-{    "clrb",   {"wb",                  0x49    } },
-{    "shlq",   {"rbrqwq",              0x4a    } },
-{    "clrw",   {"ww",                  0x4b    } },
-{    "mull2",  {"rlml",                0x4c    } },
-{    "clrl",   {"wl",                  0x4d    } },
-{    "shal",    {"rbrlwl",             0x4e    } },
-{    "bleq",   {"bb",                  0x51    } },
-{    "expf",    {"",                    0x55    } },
-{    "tstf",    {"",                    0x56    } },
-{    "tstd",    {"",                    0x57    } },
-{    "shrl",    {"rbrlwl",             0x58    } },
-{    "tstb",   {"rb",                  0x59    } },
-{    "shrq",    {"rbrqwq",             0x5a    } },
-{    "tstw",   {"rw",                  0x5b    } },
-{    "mull3",  {"rlrlwl",              0x5c    } },
-{    "tstl",   {"rl",                  0x5d    } },
-{    "shar",   {"rbrlwl",              0x5e    } },
-{    "bbssi",  {"rlmlbw",              0x5f    } },
-{    "ldpctx", {"",                    0x60    } },
-{    "pushd",   {"",                    0x67    } },
-{    "incb",   {"mb",                  0x69    } },
-{    "incw",   {"mw",                  0x6b    } },
-{    "divl2",  {"rlml",                0x6c    } },
-{    "incl",   {"ml",                  0x6d    } },
-{    "cvtlb",  {"rlwb",                0x6f    } },
-{    "svpctx", {"",                    0x70    } },
-{    "jmp",    {"ab",                  0x71    } },
-{    "cvlf",    {"rl",                  0x76    } },
-{    "cvld",    {"rl",                  0x77    } },
-{    "decb",   {"mb",                  0x79    } },
-{    "decw",   {"mw",                  0x7b    } },
-{    "divl3",  {"rlrlwl",              0x7c    } },
-{    "decl",   {"ml",                  0x7d    } },
-{    "cvtlw",  {"rlww",                0x7f    } },
-{    "bgeq",   {"bb",                  0x81    } },
-{    "movs2",  {"abab",                0x82    } },
-{    "cvfl",    {"wl",                  0x86    } },
-{    "cvdl",    {"wl",                  0x87    } },
-{    "orb2",   {"rbmb",                0x88    } },
-{    "cvtbl",  {"rbwl",                0x89    } },
-{    "orw2",   {"rwmw",                0x8a    } },
-{    "bispsw", {"rw",                  0x8b    } },
-{    "orl2",    {"rlml",                0x8c    } },
-{    "adwc",   {"rlml",                0x8d    } },
-{    "adda",   {"rlml",                0x8e    } },
-{    "blss",   {"bb",                  0x91    } },
-{    "cmps2",   {"abab",               0x92    } },
-{    "ldfd",    {"rl",                  0x97    } },
-{    "orb3",   {"rbrbwb",              0x98    } },
-{    "cvtbw",  {"rbww",                0x99    } },
-{    "orw3",           {"rwrwww",              0x9a    } },
-{    "bicpsw", {"rw",                  0x9b    } },
-{    "orl3",    {"rlrlwl",              0x9c    } },
-{    "sbwc",   {"rlml",                0x9d    } },
-{    "suba",    {"rlml",                0x9e    } },
-{    "bgtru",  {"bb",                  0xa1    } },
-{    "cvdf",    {"",                    0xa6    } },
-{    "andb2",   {"rbmb",               0xa8    } },
-{    "movzbl", {"rbwl",                0xa9    } },
-{    "andw2",   {"rwmw",               0xaa    } },
-{    "loadr",   {"rwal",               0xab    } },
-{    "andl2",   {"rlml",               0xac    } },
-{    "mtpr",   {"rlrl",                0xad    } },
-{    "ffs",    {"rlwl",                0xae    } },
-{    "blequ",  {"bb",                  0xb1    } },
-{    "negf",    {"",                    0xb6    } },
-{    "negd",    {"",                    0xb7    } },
-{    "andb3",   {"rbrbwb",              0xb8    } },
-{    "movzbw", {"rbww",                0xb9    } },
-{    "andw3",   {"rwrwww",             0xba    } },
-{    "storer",  {"rwal",                0xbb    } },
-{    "andl3",   {"rlrlwl",             0xbc    } },
-{    "mfpr",   {"rlwl",                0xbd    } },
-{    "ffc",    {"rlwl",                0xbe    } },
-{    "calls",  {"rbab",                0xbf    } },
-{    "prober", {"rbabrl",              0xc0    } },
-{    "bvc",    {"bb",                  0xc1    } },
-{    "movs3",  {"ababrw",              0xc2    } },
-{    "movzwl", {"rwwl",                0xc3    } },
-{    "addf",    {"rl",                  0xc6    } },
-{    "addd",    {"rq",                  0xc7    } },
-{    "xorb2",   {"rbmb",                0xc8    } },
-{    "movob",   {"rbwb",                0xc9    } },
-{    "xorw2",   {"rwmw",                0xca    } },
-{    "movow",   {"rwww",                0xcb   } },
-{    "xorl2",  {"rlml",                0xcc    } },
-{    "movpsl",  {"wl",                  0xcd    } },
-{    "kcall",   {"rw",                 0xcf    } },
-{    "probew",  {"rbabrl",             0xd0    } },
-{    "bvs",     {"bb",                 0xd1    } },
-{    "cmps3",   {"ababrw",             0xd2    } },
-{    "subf",    {"rq",                  0xd6    } },
-{    "subd",    {"rq",                  0xd7    } },
-{    "xorb3",  {"rbrbwb",              0xd8    } },
-{    "pushb",   {"rb",                 0xd9    } },
-{    "xorw3",  {"rwrwww",              0xda    } },
-{    "pushw",   {"rw",                         0xdb    } },
-{    "xorl3",  {"rlrlwl",              0xdc    } },
-{    "pushl",  {"rl",                  0xdd    } },
-{    "insque", {"abab",                0xe0    } },
-{    "bcs",    {"bb",                  0xe1    } },
-{    "bgequ",  {"bb",                  0xe1    } },
-{    "mulf",    {"rq",                  0xe6    } },
-{    "muld",    {"rq",                  0xe7    } },
-{    "mnegb",  {"rbwb",                0xe8    } },
-{    "movab",  {"abwl",                0xe9    } },
-{    "mnegw",  {"rwww",                0xea    } },
-{    "movaw",  {"awwl",                0xeb    } },
-{    "mnegl",  {"rlwl",                0xec    } },
-{    "moval",  {"alwl",                0xed    } },
-{    "remque", {"ab",                  0xf0    } },
-{    "bcc",    {"bb",                  0xf1    } },
-{    "blssu",  {"bb",                  0xf1    } },
-{    "divf",    {"rq",                  0xf6    } },
-{    "divd",    {"rq",                  0xf7    } },
-{    "movblk",  {"alalrw",              0xf8   } },
-{    "pushab", {"ab",                  0xf9    } },
-{    "pushaw", {"aw",                  0xfb    } },
-{    "casel",  {"rlrlrl",              0xfc    } },
-{    "pushal", {"al",                  0xfd    } },
-{    "callf",  {"rbab",                0xfe    } },
-{      ""       ,   ""          } /* empty is end sentinel */
-
-};
diff --git a/gdb/tdesc.c b/gdb/tdesc.c
deleted file mode 100755 (executable)
index 4a38649..0000000
+++ /dev/null
@@ -1,1650 +0,0 @@
-/* This file has been modified by Data General Corporation, November 1989. */
-
-/*
-This file provides an abstract interface to "tdesc" information.
-      It is designed to be used in a uniform manner by several kinds
-      of debuggers:
-         (1) code in live debugged process (e.g., a traceback routine)
-         (2) a separate-process debugger debugging a live process
-         (3) a separate-process debugger debugging a memory dump
-
-      Dcontext model notes
-         * captures machine context
-            * partial: excludes memory
-         * frames
-            * kinds
-         * make one for starters, chain in reverse order to previous ones
-         * representation: pointer to opaque
-            * alloc/free protocol
-
-      Overall model
-         * access functions
-         * handle
-         * error handling
-*/
-
-
-
-typedef int dc_boolean_t;   /* range 0 .. 1 */
-#define DC_FALSE 0
-#define DC_TRUE 1
-
-
-typedef int dc_tristate_t;  /* range 0 .. 2 */
-#define DC_NO 0
-#define DC_YES 1
-#define DC_MAYBE 2
-
-
-/*
-   A word is 32 bits of information.  In memory, a word is word-aligned.
-
-   A common and important use of dc_word_t is to represent values in the
-   target process, including (byte) addresses in the target process.
-   In this case, C arithmetic can be used to simulate machine address
-   arithmetic on the target.  (Unsigned arithmetic is actually modulus
-   arithmetic.)
-*/
-typedef unsigned int dc_word_t;
-
-
-/* These bit operations number bits from 0 at the least significant end. */
-#define bit_test(word,bit) ((word) & (1 << (bit)))    /* returns 0 or other */
-#define bit_value(word,bit) (((word) >> (bit)) & 1)   /* returns 0 or 1 */
-#define bit_set(word,bit) ((word) |= (1 << (bit)))
-#define bit_clear(word,bit) ((word) &= ~(1 << (bit)))
-#define bit_assign(word, bit, bool) \
-   if (bool) bit_set(word, bit); else bit_clear(word, bit)
-
-
-/*----------------*/
-
-
-/* The exactness of locations may not be certainly known. */
-typedef dc_tristate_t dc_exactness_t;
-
-
-/*
-   The model includes five kinds of contexts.  Because each context
-   has an associated region and frame, these describe region kinds
-   and frame kinds as well.
-   [more description needed]
-   Currently, only call contexts exist.
-*/
-
-typedef int dc_kind_t;   /* range 0 .. 4 */
-#define DC_CALL_KIND          0
-#define DC_SAVE_KIND          1
-#define DC_EXCEPTION_KIND     2
-#define DC_PROTECTION_KIND    3
-#define DC_SPECIAL_KIND       4
-#define DC_NUM_KINDS          5
-
-#define DC_MIO_ENTRY_POINT            (1<< 0)
-#define DC_MIO_PROLOGUE_END           (1<< 1)
-#define DC_MIO_EPILOGUE_START         (1<< 2)
-#define DC_MIO_IMPLICIT_PROLOGUE_END  (1<<16)
-#define DC_MIO_LITERAL_ENTRY_POINT    (1<<17)
-#define DC_MIO_LITERAL_EPILOGUE_START (1<<18)
-
-#define DC_MII_PRECEDING_TDESC_END   (1<<0)
-#define DC_MII_FOLLOWING_TDESC_START (1<<1)
-
-typedef struct dc_debug_info {
-   unsigned int         protocol;            /* 1 for this structure */
-   dc_word_t               tdesc_ptr;
-   unsigned int         text_words_count;
-   dc_word_t               text_words_ptr;
-   unsigned int         data_words_count;
-   dc_word_t               data_words_ptr;
-} dc_debug_info_t;
-
-
-typedef struct tdesc_hdr {
-   unsigned int         map_protocol;        /* 1 for this structure */
-   unsigned int         end;                 /* address beyond end */
-} tdesc_hdr_t;
-
-
-typedef struct tdesc_chunk_hdr {
-   int                  zeroes : 8;
-   int                  info_length : 22;
-   int                  info_alignment : 2;
-   unsigned int         info_protocol;
-   dc_word_t               start_address;
-   dc_word_t               end_address;
-} tdesc_chunk_hdr_t;
-
-
-typedef struct tdesc_chunk_info1 {
-   int                  variant : 8;         /* 1 for this structure */
-   int                  register_save_mask : 17;
-   int                  pad1 : 1;
-   int                  return_address_info_discriminant : 1;
-   int                  frame_address_register : 5;
-   unsigned int         frame_address_offset;
-   unsigned int         return_address_info;
-   unsigned int         register_save_offset;
-} tdesc_chunk_info1_t;
-
-
-typedef struct tdesc_chunk1 {
-   tdesc_chunk_hdr_t    hdr;
-   tdesc_chunk_info1_t  info;
-} tdesc_chunk1_t;
-
-
-typedef struct dc_mstate {
-   dc_word_t reg[32];                      /* general registers */
-   dc_word_t xip;
-   dc_word_t nip;
-   dc_word_t fip;
-   dc_word_t fpsr;
-   dc_word_t fpcr;
-   dc_word_t psr;
-} dc_mstate_t;
-
-
-typedef struct dc_map_info_in {
-   dc_word_t flags;
-   dc_word_t preceding_tdesc_end;
-   dc_word_t following_tdesc_start;
-} dc_map_info_in_t;
-
-
-typedef struct dc_map_info_out {
-   dc_word_t flags;
-   dc_word_t entry_point;
-   dc_word_t prologue_end;
-   dc_word_t epilogue_start;
-} dc_map_info_out_t;
-
-
-#if 0
-
-   void error_fcn (env, continuable, message)
-      dc_word_t env;                       /* environment (arbitrary datum) */
-      dc_boolean_t continuable;            /* whether error function may return */
-      char *message;                    /* string (no trailing newline) */
-
-   /* In the future, we probably want the error_fcn to be: */
-   void error_fcn (env, continuable, code, ...)
-      dc_word_t env;                       /* environment (arbitrary datum) */
-      dc_boolean_t continuable;            /* whether error function may return */
-      int code;                         /* error code */
-      ...                               /* parameters to message associated
-                                           with the code */
-
-   void read_fcn (env, memory, length, buffer)
-      dc_word_t env;                       /* environment (arbitrary datum) */
-      dc_word_t memory;                    /* start address in image */
-      int length;                       /* in bytes */
-      char *buffer;                     /* start address of buffer */
-      /* There are no alignment assumptions for the read function. */
-
-   void write_fcn (env, memory, length, buffer)
-      dc_word_t env;                       /* environment (arbitrary datum) */
-      dc_word_t memory;                    /* start address in image */
-      int length;                       /* in bytes */
-      char *buffer;                     /* start address of buffer */
-      /* There are no alignment assumptions for the write function. */
-      /* The write function is optional.  It must be provided if changes
-         to writable registers are to be made. */
-
-   void exec_fcn (env, mstate)
-      dc_word_t env;                       /* environment (arbitrary datum) */
-      dc_mstate_t *mstate;              /* machine state (read-write) */
-      /* The execute function is optional.  It would be used (in the future)
-         by the implementation of a procedurally specified tdesc mechanism. */
-
-#endif
-
-/*----------------*/
-
-
-#ifndef NULL
-#define NULL ((void *) 0)
-#endif
-
-extern char *malloc();
-extern char *calloc();
-extern void qsort();
-
-
-/*
-   At initialization, create a tdesc table from the tdesc info.
-   A tdesc table is simply a sorted array of tdesc elements.
-   A tdesc element is the last 6 words of the tdesc chunk.
-   We require that all tdesc chunks have info protocol 1.
-*/
-
-typedef struct tdesc_elem {
-   dc_word_t start_address;
-   dc_word_t end_address;
-   tdesc_chunk_info1_t info;
-} tdesc_elem_t;
-
-typedef tdesc_elem_t *tdesc_table_t;
-
-void dc_correct_cr_data();
-
-int dc_compare_tdesc_elems (elem1, elem2)
-   char *elem1, *elem2;
-{
-   dc_word_t s1, s2, e1, e2;
-   s1 = ((tdesc_elem_t *) elem1)->start_address;
-   s2 = ((tdesc_elem_t *) elem2)->start_address;
-   if (s1 < s2) return -1;
-   if (s1 > s2) return  1;
-   e1 = ((tdesc_elem_t *) elem1)->end_address;
-   e2 = ((tdesc_elem_t *) elem2)->end_address;
-   if (e1 < e2) return -1;
-   if (e1 > e2) return  1;
-   return 0;
-}
-
-
-typedef struct handle_info {
-   dc_word_t debug_info_ptr;
-   void (*error_fcn)();
-   dc_word_t error_env;
-   void (*read_fcn)();
-   dc_word_t read_env;
-   void (*write_fcn)();                 /* NULL => absent */
-   dc_word_t write_env;
-   void (*exec_fcn)();                  /* NULL => absent */
-   dc_word_t exec_env;
-   void (*map_fcn)();                  /* NULL => absent */
-   dc_word_t map_env;
-   tdesc_table_t tdesc_table;
-   int tdesc_table_size;
-} handle_info_t;
-
-typedef handle_info_t *dc_handle_t;
-
-
-/*
-   Errors detected in this module are funnelled through dc_error or dc_warn,
-   as appropriate.  Both routines call dc_exception, which invokes the error
-   handler supplied by the user.
-
-   Currently, dc_exception substitutes parameters into the message given
-   it and passes the resulting string to the user error handler.
-   In the future, dc_exception should simply pass an error code and
-   the parameters on to the user error handler.
-*/
-
-#include <varargs.h>
-extern int vsprintf();
-
-/* Exit status for exception-processing machinery failure */
-#define DC_EXCEPTION_FAILURE    250
-
-void dc_exception(continuable, args)
-   dc_boolean_t continuable;
-   va_list args;
-{
-   dc_handle_t handle;
-   char *format;
-   char buffer[1024];
-
-   handle = va_arg(args, dc_handle_t);
-   format = va_arg(args, char *);
-   (void) vsprintf(buffer, format, args);
-   (*(handle->error_fcn)) (handle->error_env, continuable, buffer);
-   if (!continuable)
-      exit(DC_EXCEPTION_FAILURE);  /* User error handler should never return in this case. */
-}
-
-
-void dc_error(va_alist)  /* (handle, format, args... ) */
-   va_dcl
-{
-   va_list args;
-
-   va_start(args);
-   dc_exception(DC_FALSE, args);
-   va_end(args);
-}
-
-
-void dc_warn(va_alist)  /* (handle, format, args... ) */
-   va_dcl
-{
-   va_list args;
-
-   va_start(args);
-   dc_exception(DC_TRUE, args);
-   va_end(args);
-}
-
-
-
-#define MALLOC_FAILURE_MESSAGE "Heap space exhausted (malloc failed)."
-#define CALLOC_FAILURE_MESSAGE "Heap space exhausted (Calloc failed)."
-
-
-/* Commonize memory allocation call so failure diagnosis is easier */
-
-char* dc_malloc( handle, size )
-    dc_handle_t handle;
-    int         size;
-{
-    char* space = malloc( size );
-    if (space == (char *)NULL)
-        dc_error( handle, MALLOC_FAILURE_MESSAGE );
-
-    return space;
-}
-
-
-/* Commonize memory allocation call so failure diagnosis is easier */
-
-char* dc_calloc( handle,nelem, size )
-    dc_handle_t handle;
-    int         nelem;
-    int                size;
-{
-    char* space = calloc( nelem, size );
-    if (space == (char *)NULL)
-        dc_error( handle, CALLOC_FAILURE_MESSAGE );
-
-    return space;
-}
-
-
-dc_word_t dc_read_word (handle, address)
-   dc_handle_t handle;
-   dc_word_t address;
-{
-   dc_word_t word;
-   (*(handle->read_fcn)) (handle->read_env, address,
-                          sizeof(dc_word_t), (char *)(&(word)));
-   return word;
-}
-
-
-void dc_write_word (handle, address, value)
-   dc_handle_t handle;
-   dc_word_t address;
-   dc_word_t value;
-{
-   dc_word_t word;
-   word = value;
-   if (handle->write_fcn) {
-      (*(handle->write_fcn)) (handle->write_env, address,
-                              sizeof(dc_word_t), (char *)(&(word)));
-   } else {
-      dc_error (handle, "Writing is disabled.");
-   }
-}
-
-
-void dc_write_masked_word (handle, address, mask, value)
-   dc_handle_t handle;
-   dc_word_t address;
-   dc_word_t mask;
-   dc_word_t value;
-{
-   dc_write_word (handle, address,
-      (value & mask) | (dc_read_word(handle, address) & ~mask));
-}
-
-
-dc_handle_t dc_initiate (debug_info_ptr,
-                        error_fcn, error_env,
-                         read_fcn, read_env,
-                         write_fcn, write_env,
-                         exec_fcn, exec_env,
-                         map_fcn, map_env)
-   dc_word_t debug_info_ptr;
-   void (*error_fcn)();
-   dc_word_t error_env;
-   void (*read_fcn)();
-   dc_word_t read_env;
-   void (*write_fcn)();                 /* NULL => absent */
-   dc_word_t write_env;
-   void (*exec_fcn)();                  /* NULL => absent */
-   dc_word_t exec_env;
-   void (*map_fcn)();                  /* NULL => absent */
-   dc_word_t map_env;
-   /* write_fcn may be given as NULL if no writing is required. */
-   /* exec_fcn may be given as NULL if no execution is required.
-      Currently, no execution is required.  It would be if the
-      implementation needed to invoke procedures in the debugged process. */
-{
-   dc_handle_t handle;
-   unsigned int debug_info_protocol;
-   dc_debug_info_t debug_info;
-   unsigned int tdesc_map_protocol;
-   tdesc_hdr_t tdesc_hdr;
-   dc_word_t tdesc_info_start;
-   dc_word_t tdesc_info_end;
-   dc_word_t tdesc_info_length;
-
-   /* Set up handle enough for dc_error. */
-   handle = (dc_handle_t) malloc(sizeof(handle_info_t));
-   /* Cant use dc_malloc() as handle is being created ... */
-   /* if (handle == NULL) (*error_fcn)( error_env, MALLOC_FAILURE_MESSAGE ) */
-   handle->error_fcn = error_fcn;
-   handle->error_env = error_env;
-   handle->read_fcn = read_fcn;
-   handle->read_env = read_env;
-   handle->write_fcn = write_fcn;
-   handle->write_env = write_env;
-   handle->exec_fcn = exec_fcn;
-   handle->exec_env = exec_env;
-/****************************************************************/
-/* BUG 9/19/89 Found by hls.  Map functions not initialized.    */
-/****************************************************************/
-   handle->map_fcn = map_fcn;
-   handle->map_env = map_env;
-   handle->debug_info_ptr = debug_info_ptr;
-   handle->tdesc_table = (tdesc_table_t)NULL;
-
-   /* Find tdesc info. */
-   if (debug_info_ptr) {
-      (*read_fcn) (read_env, debug_info_ptr, sizeof(unsigned int),
-                  (char *)(&debug_info_protocol));
-      if (debug_info_protocol != 1)
-        dc_error (handle, "Unrecognized debug info protocol: %d",
-                  debug_info_protocol);
-      (*read_fcn) (read_env, debug_info_ptr, sizeof(dc_debug_info_t),
-                  (char *)(&debug_info));
-      (*read_fcn) (read_env, debug_info.tdesc_ptr, sizeof(unsigned int),
-                  (char *)(&tdesc_map_protocol));
-      if (tdesc_map_protocol != 1)
-        dc_error (handle, "Unrecognized tdesc map protocol: %d",
-                  tdesc_map_protocol);
-      (*read_fcn) (read_env, debug_info.tdesc_ptr, sizeof(tdesc_hdr_t),
-                  (char *)(&tdesc_hdr));
-      tdesc_info_start = debug_info.tdesc_ptr + sizeof(tdesc_hdr_t);
-      tdesc_info_end = tdesc_hdr.end;
-      tdesc_info_length = tdesc_info_end - tdesc_info_start;
-
-      /* Create tdesc table from tdesc info. */
-      {
-        /* Over-allocate in order to avoid second pass over tdesc info. */
-        tdesc_table_t tt = (tdesc_table_t) dc_malloc(handle, tdesc_info_length);
-        dc_word_t p = tdesc_info_start;
-        dc_word_t q = tdesc_info_end - sizeof(tdesc_chunk1_t);
-        int n = 0;
-        tdesc_chunk1_t chunk;
-        dc_word_t start_address, end_address;
-        int i;
-
-        for (; p <= q; ) {
-           (*read_fcn) (read_env, p, sizeof(tdesc_chunk1_t), (char *)(&chunk));
-           if (chunk.hdr.zeroes != 0) {
-              /* Skip padding. */
-              p += sizeof(dc_word_t);
-              continue;
-           }
-           if (chunk.hdr.info_protocol != 1) {
-              dc_warn (handle, "Unrecognized tdesc info protocol: %d",
-                        chunk.hdr.info_protocol);
-              goto next_chunk;
-           }
-           if (chunk.hdr.info_length != 16) {
-              dc_warn (handle, "Incorrect tdesc info length: %d",
-                        chunk.hdr.info_length);
-              goto next_chunk;
-           }
-           if (chunk.hdr.info_alignment > 2) {
-              dc_warn (handle, "Incorrect tdesc info alignment: %d",
-                        chunk.hdr.info_alignment);
-              goto next_chunk;
-           }
-           start_address = chunk.hdr.start_address;
-           end_address = chunk.hdr.end_address;
-           if ((start_address&3)!=0) {
-              dc_warn (handle,
-                 "Tdesc start address is not word-aligned: %#.8X",
-                 start_address);
-              goto next_chunk;
-           }
-           if ((end_address&3)!=0) {
-              dc_warn (handle,
-                 "Tdesc end address is not word-aligned: %#.8X",
-                 end_address);
-              goto next_chunk;
-           }
-           if (start_address > end_address) {
-                    /* Note that the range may be null. */
-              dc_warn (handle,
-                 "Tdesc start address (%#.8X) follows end address (%#.8X).",
-                 start_address, end_address);
-              goto next_chunk;
-           }
-           if (chunk.info.variant != 1) {
-              dc_warn (handle, "Invalid tdesc chunk variant: %d",
-                 chunk.info.variant);
-              goto next_chunk;
-           }
-           if (chunk.info.pad1 != 0) {
-              dc_warn (handle, "Tdesc chunk padding is not zero.");
-              goto next_chunk;
-           }
-           if (chunk.info.return_address_info_discriminant != 0) {
-              if ((chunk.info.return_address_info & 3) != 0) {
-                 dc_warn (handle,
-                    "Tdesc return address offset is not word-aligned: %#.8X",
-                    chunk.info.return_address_info);
-                 goto next_chunk;
-              }
-           } else {
-              if ((chunk.info.return_address_info & ~31) != 0) {
-                 dc_warn (handle,
-                    "Invalid tdesc return address register: %d",
-                    chunk.info.return_address_info);
-                 goto next_chunk;
-              }
-           }
-           if ((chunk.info.register_save_offset & 3) != 0) {
-              dc_warn (handle,
-                 "Tdesc register save offset is not word-aligned: %#.8X",
-                 chunk.info.register_save_offset);
-              goto next_chunk;
-           }
-
-           tt[n].start_address = start_address;
-           tt[n].end_address = end_address;
-           tt[n].info = chunk.info;
-           n++;
-
-   next_chunk:
-           p += sizeof(tdesc_chunk1_t);
-        }
-        /* Leftover (less than a tdesc_chunk1_t in size) is padding or
-           in error.  Ignore it in either case. */
-
-        if (n != 0) {
-
-                /* Sort table by start address. */
-                qsort ((char *)tt, n, sizeof(tdesc_elem_t), dc_compare_tdesc_elems);
-
-                /* Check for overlap among tdesc chunks. */
-                for (i=0; i<(n-1); i++) {
-                   if (tt[i].end_address > tt[i+1].start_address)
-                      dc_error (handle, "Text chunks overlap.");
-                }
-        }
-
-        /* Finish setting up handle. */
-        handle->tdesc_table = tt;
-        handle->tdesc_table_size = n;
-      }
-   } else {
-      handle->tdesc_table_size = 0;
-   }
-
-   return (dc_handle_t) handle;
-}
-
-
-void dc_terminate (handle)
-   dc_handle_t handle;
-{
-   if (((dc_handle_t)handle)->tdesc_table) {
-      free((char *)(((dc_handle_t)handle)->tdesc_table));
-   }
-   free((char *)handle);
-}
-
-
-
-/*
-
-   Dcontext Model
-
-   For each interesting register (word-sized piece of machine state),
-   a word of value information is kept.  This word may
-   be either the value of the register, or the address in
-   subject memory where the value can be found (and changed).  In
-   addition, the register may be invalid (in which case the value
-   information is undefined).  These three cases are encoded for
-   a given register in the same-numbered bit of two words of flags:
-
-      flags[0] bit  flags[1] bit  meaning
-      ------------  ------------  -------
-            0             0       register is invalid; info is undefined
-            0             1       register is readable; info is value
-            1             0       register is writable; info is address
-            1             1       (reserved)
-
-   The general registers (r0-r31) are handled by reg_info and
-   reg_flags.  The bit number for a register is that register's number.
-   The other registers are grouped together for convenience and are
-   handled by aux_info and aux_flags.  The bit numbers for these
-   registers are:
-
-      bit number     register
-      ----------     --------
-           0         location
-           1         SXIP
-           2         SNIP
-           3         SFIP
-           4         FPSR
-           5         FPCR
-
-   The SXIP, SNIP, and SFIP are the exception-time values of the
-   XIP, NIP, and FIP registers.  They are valid only in the topmost frame.
-   (That is, in any context obtained from dc_previous_context, they
-   are invalid.)
-
-   "location" is a pseudo-register of this model and represents the
-   location of the context.  It is always valid.  It also has an
-   exactness associated with it.  The location and its exactness of a
-   context obtained from dc_previous_context are taken from the
-   return address and its exactness of the context given as an argument
-   to dc_previous_context.
-
-   The following model is recommended for dealing with the partial
-   redundancy between location and the SXIP, SNIP, and SFIP values
-   in the topmost frame.  The location should be set to either the
-   SNIP or SXIP value, and its exactness should be set to DC_NO.  A
-   change to the register whose value the location is set to should
-   be accompanied by an identical change to the location.
-
-   The PSR is handled separately, because it is a diverse collection
-   of flags.  The PSR, as a whole, is always valid.  A separate
-   psr_ind flag tells whether the psr_info data is a value or
-   an address.  Each bit of the PSR has its own pair of flag bits to
-   mark validity and writability.
-
-*/
-
-
-/* The following value means "other", because state is stored in 2 bits. */
-#define DC_RESERVED 3
-
-
-#define RSTATE(flags, bit) \
-   ((bit_value((flags)[0], bit) << 1) + bit_value((flags)[1], bit))
-
-#define REG_STATE(dcontext, reg) RSTATE(dcontext->reg_flags, reg)
-#define AUX_STATE(dcontext, reg) RSTATE(dcontext->aux_flags, reg)
-#define PSR_STATE(dcontext, reg) RSTATE(dcontext->psr_flags, reg)
-
-
-#define SET_INVALID(flags, bit) \
-   { bit_clear ((flags)[0], bit); bit_clear ((flags)[1], bit); }
-
-#define SET_READABLE(flags, bit) \
-   { bit_clear ((flags)[0], bit); bit_set   ((flags)[1], bit); }
-
-#define SET_WRITABLE(flags, bit) \
-   { bit_set   ((flags)[0], bit); bit_clear ((flags)[1], bit); }
-
-#define ASSIGN_RSTATE(to_flags, to_bit, from_flags, from_bit) \
-   { bit_assign ((to_flags)[0], to_bit, bit_value((from_flags)[0], from_bit));\
-     bit_assign ((to_flags)[1], to_bit, bit_value((from_flags)[1], from_bit));}
-
-
-#define CHECK_REG_READ(dcontext, reg) \
-   if (REG_STATE(dcontext, reg) == DC_INVALID) \
-      dc_error (dcontext->handle, \
-         "General register %d is not readable.", reg)
-
-#define CHECK_REG_WRITE(dcontext, reg) \
-   if (REG_STATE(dcontext, reg) != DC_WRITABLE) \
-      dc_error (dcontext->handle, \
-         "General register %d is not writable.", reg)
-
-#define CHECK_AUX_READ(dcontext, reg) \
-   if (AUX_STATE(dcontext, reg) == DC_INVALID) \
-      dc_error (dcontext->handle, \
-         "Auxiliary register %d is not readable.", reg)
-
-#define CHECK_AUX_WRITE(dcontext, reg) \
-   if (AUX_STATE(dcontext, reg) != DC_WRITABLE) \
-      dc_error (dcontext->handle, \
-         "Auxiliary register %d is not writable.", reg)
-
-
-
-#define DC_REG_RA   1
-#define DC_REG_FP  30
-#define DC_REG_SP  31
-#define DC_NUM_REG 32
-
-#define DC_AUX_LOC  0
-   /* DC_AUX_LOC must be first, with value 0 */
-#define DC_AUX_SXIP 1
-#define DC_AUX_SNIP 2
-#define DC_AUX_SFIP 3
-#define DC_AUX_FPSR 4
-#define DC_AUX_FPCR 5
-#define DC_NUM_AUX  6
-
-
-
-#define CHECK_REG(dcontext, reg) \
-   if ((reg < 0) || (reg >= DC_NUM_REG)) \
-      dc_error (dcontext->handle, \
-         "Bad general register number: %d", reg)
-
-#define CHECK_AUX(dcontext, reg) \
-   if ((reg < 1) || (reg >= DC_NUM_AUX)) \
-      dc_error (dcontext->handle, \
-         "Bad auxiliary register number: %d", reg)
-   /* CHECK_AUX is not used for location pseudo-register. */
-
-#define CHECK_BIT(dcontext, bit) \
-   if ((bit < 0) || (bit >= 32)) \
-      dc_error (dcontext->handle, \
-         "Bad bit number: %d", bit)
-
-
-
-typedef struct cr_value {
-   int reg;
-   unsigned int off;
- } dc_cr_value_t;
-
-#define DC_UNDEF 32
-
-/*
-   A "dc_cr_value" represents an execution-time value symbolically, in
-   terms of the initial value of a register (the value on entry to
-   the procedure being analyzed) and a known offset.  A value with
-   a 'reg' field value of 0 through 31 represents the value obtained
-   by summing (using 32-bit modulus arithmetic) the initial value of
-   register 'reg' and the value 'off'.  Note that the value (0,k)
-   represents the constant value k, that (31,0) represents the CFA, and
-   that (1,0) represents the return address.  A value with a 'reg' field
-   of DC_UNDEF represents an indeterminable value; in this case the
-   'off' field is undefined.  Other values of 'reg' are erroneous.
-*/
-
-typedef struct cr_data {
-   dc_cr_value_t reg_val[DC_NUM_REG];
-   dc_word_t saved;
-   dc_word_t how;
-   unsigned int where[DC_NUM_REG];
-} dc_cr_data_t;
-
-/*
-   'cr_data' collects all the information needed to represent the
-   symbolic machine state during code reading.
-
-   The 'reg_val' array gives the current dc_cr_value for each register.
-   
-   The 'saved', 'how', and 'where' fields combine to describe what
-   registers have been saved, and where.  The 'saved' and 'how' fields
-   are implicitly bit arrays over 0..31, where the numbering is from
-   0 on the right.  (Hence, 1<<r gives the mask for register r.)
-   If saved[r] is 0, the register is not saved, and how[r] and where[r]
-   are undefined.  If saved[r] is 1, then how[r] tells whether register r
-   was saved in another register (how[r]==0) or in the frame (how[r]==1).
-   In the former case, where[r] gives the register number; in the latter
-   case, where[r] gives the frame position.
-*/
-
-
-typedef int dc_register_state_t;    /* range 0 to 2 */
-
-#define DC_INVALID  0
-#define DC_READABLE 1
-#define DC_WRITABLE 2
-
-
-
-
-typedef struct dcontext_info {
-   dc_handle_t handle;                     /* environment of context */
-   dc_word_t reg_info[DC_NUM_REG];
-   dc_word_t reg_flags[2];
-   dc_word_t aux_info[DC_NUM_AUX];
-   dc_word_t aux_flags[2];
-   dc_exactness_t loc_exact;
-   dc_word_t psr_info;                     /* value or address */
-   dc_word_t psr_ind;                      /* DC_TRUE iff address */
-   dc_word_t psr_flags[2];                 /* per-PSR-bit flags */
-   unsigned int code_reading;                 /* no tdesc therefore must read code*/
-        union {
-          tdesc_elem_t *tdesc_elem_ptr;       /* locates tdesc chunk */
-          dc_cr_data_t *cr_data_ptr;          /* or code reading data */
-        } info_ptr;
-} dcontext_info_t;
-
-typedef dcontext_info_t *dc_dcontext_t;
-
-dc_word_t dc_get_value (handle, info, flags, pos)
-   dc_handle_t handle;
-   dc_word_t info[];
-   dc_word_t flags[2];
-   int pos;
-   /* Assumes either DC_READABLE or DC_WRITABLE. */
-{
-   if (bit_test(flags[0], pos)) {
-      /* DC_WRITABLE case */
-      return dc_read_word(handle, info[pos]);
-   } else {
-      /* DC_READABLE case */
-      return info[pos];
-   }
-}
-
-void dc_set_value (handle, info, flags, pos, value)
-   dc_handle_t handle;
-   dc_word_t info[];
-   dc_word_t flags[2];
-   int pos;
-   dc_word_t value;
-   /* Assumes DC_WRITABLE. */
-{
-   dc_write_word(handle, info[pos], value);
-}
-
-
-#define GET_REG_VALUE(dcontext, reg) \
-   dc_get_value(dcontext->handle, dcontext->reg_info, dcontext->reg_flags, reg)
-
-#define SET_REG_VALUE(dcontext, reg, value) \
-   dc_set_value(dcontext->handle, dcontext->reg_info, dcontext->reg_flags, reg, \
-      value)
-
-#define GET_AUX_VALUE(dcontext, reg) \
-   dc_get_value(dcontext->handle, dcontext->aux_info, dcontext->aux_flags, reg)
-
-#define SET_AUX_VALUE(dcontext, reg, value) \
-   dc_set_value(dcontext->handle, dcontext->aux_info, dcontext->aux_flags, reg, \
-      value)
-
-
-
-void dc_check_dcontext (dc)
-   dc_dcontext_t dc;
-   /* Check consistency of information supplied to make a dcontext. */
-{
-   int i;
-
-   if ((REG_STATE(dc, 0) != DC_READABLE) || (dc->reg_info[0] != 0))
-      dc_error (dc->handle, "Register 0 is misspecified");
-   for (i = 1; i < DC_NUM_REG; i++)
-      if (REG_STATE(dc, i) == DC_RESERVED)
-         dc_error (dc->handle,
-            "State for general register %d is incorrect", i);
-   for (i = 0; i < DC_NUM_AUX; i++)
-      if (AUX_STATE(dc, i) == DC_RESERVED)
-         dc_error (dc->handle,
-            "State for auxiliary register %d is incorrect", i);
-   if (AUX_STATE(dc, DC_AUX_LOC) == DC_INVALID)
-      dc_error (dc->handle, "Location is specified as invalid");
-   if (GET_AUX_VALUE(dc, DC_AUX_LOC) == 0)
-      dc_error (dc->handle, "Location is zero.");
-   if (dc->loc_exact >= 3)
-      dc_error (dc->handle, "Location exactness is incorrectly specified: %d",
-         dc->loc_exact);
-   if (dc->psr_ind >= 2)
-      dc_error (dc->handle,
-         "PSR indirection flag is incorrectly specified: %d",
-         dc->psr_ind);
-   for (i = 0; i < 32; i++)
-      if (PSR_STATE(dc, i) == DC_RESERVED)
-         dc_error (dc->handle, "State for PSR bit %d is incorrect", i);
-}
-
-
-
-tdesc_elem_t * dc_tdesc_lookup (loc, tt, tt_size, map_info_in_ptr)
-   dc_word_t loc;
-   tdesc_table_t tt;
-   int tt_size;
-   dc_map_info_in_t *map_info_in_ptr;
-   /* Return address of tdesc_elem_t for given location, or NULL if
-      there is no tdesc chunk for the location.
-   */
-{
-   int l = 0;
-   int h = tt_size;
-   int m;
-
-   if (tt_size == 0) {
-      map_info_in_ptr->flags = 0;
-      return (tdesc_elem_t *)NULL;
-   }
-   for (;;) {
-      m = (l + h) / 2;
-      if (m == l) break;
-      if (loc >= tt[m].start_address)
-         l = m;
-      else
-         h = m;
-   }
-   if (loc >= tt[m].end_address) {
-      map_info_in_ptr->preceding_tdesc_end = tt[m].end_address;
-      if (m+1 < tt_size) {
-        map_info_in_ptr->following_tdesc_start = tt[m+1].start_address;
-        map_info_in_ptr->flags = DC_MII_PRECEDING_TDESC_END |
-                                 DC_MII_FOLLOWING_TDESC_START;
-      } else {
-        map_info_in_ptr->flags = DC_MII_PRECEDING_TDESC_END;
-      }
-      return (tdesc_elem_t *)NULL;
-   } else if (loc < tt[m].start_address) {
-      map_info_in_ptr->following_tdesc_start = tt[m].start_address;
-      map_info_in_ptr->flags = DC_MII_FOLLOWING_TDESC_START;
-      return (tdesc_elem_t *)NULL;
-   } else {
-      return (&tt[m]);
-   }
-}
-
-
-
-dc_dcontext_t dc_make_dcontext (handle,
-                                reg_info, reg_flags,
-                                aux_info, aux_flags, loc_exact,
-                                psr_info, psr_ind, psr_flags)
-   dc_handle_t handle;
-   dc_word_t reg_info[DC_NUM_REG];
-   dc_word_t reg_flags[2];
-   dc_word_t aux_info[DC_NUM_AUX];
-   dc_word_t aux_flags[2];
-   dc_exactness_t loc_exact;
-   dc_word_t psr_info;
-   dc_boolean_t psr_ind;
-   dc_word_t psr_flags[2];
-{
-   dc_dcontext_t dc = (dc_dcontext_t) dc_malloc (handle, sizeof(dcontext_info_t));
-   int i;
-   dc_map_info_in_t map_info_in;
-
-   /* Fill in supplied content. */
-   dc->handle = ((dc_handle_t)handle);
-   for (i = 0; i < DC_NUM_REG; i++) dc->reg_info[i]  = reg_info[i];
-   for (i = 0; i < 2; i++)       dc->reg_flags[i] = reg_flags[i];
-   for (i = 0; i < DC_NUM_AUX; i++) dc->aux_info[i]  = aux_info[i];
-   for (i = 0; i < 2; i++)       dc->aux_flags[i] = aux_flags[i];
-   dc->loc_exact = loc_exact;
-   dc->psr_info = psr_info;
-   dc->psr_ind = psr_ind;
-   for (i = 0; i < 2; i++)       dc->psr_flags[i] = psr_flags[i];
-
-   dc_check_dcontext(dc);
-
-   /* Find tdesc information for the text chunk. */
-   {
-/***************************************************************/
-/* BUG 8/16/89 Found by hls.  Not zeroing EV bits of location. */
-/*                            SHOULD USE dc_location()!        */
-/*      dc_word_t loc = GET_AUX_VALUE(dc, DC_AUX_LOC);         */
-/***************************************************************/
-      dc_word_t loc = GET_AUX_VALUE(dc, DC_AUX_LOC) & ~3;
-      tdesc_elem_t *tep =
-         dc_tdesc_lookup(loc, ((dc_handle_t)handle)->tdesc_table,
-             ((dc_handle_t)handle)->tdesc_table_size,&map_info_in);
-      if (tep) {
-                dc->code_reading = 0;
-         dc->info_ptr.tdesc_elem_ptr = tep;
-      } else {
-         dc->code_reading = 1;
-         if (!dc->handle->map_fcn) {
-             dc_error (dc->handle, "No tdesc information for %#.8X and no map function supplied.",loc);
-         }
-/****************************************************************/
-/* BUG 9/18/89 Found by hls.  Not using dc_malloc()             */
-/* dc->info_ptr.cr_data_ptr= (dc_cr_data_t *)malloc(sizeof(dc_cr_data_t )); */
-/****************************************************************/
-         dc->info_ptr.cr_data_ptr= (dc_cr_data_t *)dc_calloc(dc->handle,1,sizeof(dc_cr_data_t ));
-         dc_read_code(loc,dc,map_info_in,dc->info_ptr.cr_data_ptr);
-      }
-   }
-
-   return (dc_dcontext_t) dc;
-}
-
-
-
-void dc_free_dcontext (dcontext)
-   dc_dcontext_t dcontext;
-{
-/****************************************************************/
-/* BUG 9/19/89 Found by hls.  Freeing non-pointer value.        */
-/*       free((char *)dcontext->code_reading);                 */
-/****************************************************************/
-   if (dcontext->code_reading)
-         free((char *)dcontext->info_ptr.cr_data_ptr);
-   free((char *)dcontext);
-}
-
-
-
-dc_register_state_t dc_location_state (dcontext)
-   dc_dcontext_t dcontext;
-{
-   return AUX_STATE(((dc_dcontext_t)dcontext), DC_AUX_LOC);
-}
-
-
-dc_exactness_t dc_location_exactness (dcontext)
-   dc_dcontext_t dcontext;
-{
-   return ((dc_dcontext_t)dcontext)->loc_exact;
-}
-
-
-dc_word_t dc_location (dcontext)
-   dc_dcontext_t dcontext;
-   /* Return high 30 bits only. */
-{
-   /* Don't need: CHECK_AUX_READ (((dc_dcontext_t)dcontext), DC_AUX_LOC); */
-   return GET_AUX_VALUE (((dc_dcontext_t)dcontext), DC_AUX_LOC) & ~3;
-}
-
-
-dc_boolean_t dc_location_in_text_chunk( dcontext, value )
-   dc_dcontext_t dcontext;
-   dc_word_t value;
-{
-   /* Check that new location is still within same text chunk. */
-   tdesc_elem_t *tep = ((dc_dcontext_t)dcontext)->info_ptr.tdesc_elem_ptr;
-/********************************************************************/
-/* Bug in predicate -- LS adjusted according to OCS documentation.. */
-/*  if ((value < tep->start_address) || (value >= tep->end_address))*/
-/********************************************************************/
-   if ((value >= tep->start_address) && (value < tep->end_address))
-        return DC_TRUE;
-    else
-        return DC_FALSE;
-
-}
-
-
-void dc_set_location (dcontext, value)
-   dc_dcontext_t dcontext;
-   dc_word_t value;
-   /* Set high 30 bits only. */
-{
-   if (dc_location_in_text_chunk( dcontext, value ) != DC_TRUE)
-      dc_warn (((dc_dcontext_t)dcontext)->handle,
-         "New location is not in same text chunk.");
-
-   CHECK_AUX_WRITE (((dc_dcontext_t)dcontext), DC_AUX_LOC);
-   dc_write_masked_word (((dc_dcontext_t)dcontext)->handle,
-      ((dc_dcontext_t)dcontext)->aux_info[DC_AUX_LOC], ~3, value);
-}
-
-
-
-dc_register_state_t dc_general_register_state (dcontext, reg)
-   dc_dcontext_t dcontext;
-   int reg;
-{
-   CHECK_REG (((dc_dcontext_t)dcontext), reg);
-   return REG_STATE(((dc_dcontext_t)dcontext), reg);
-}
-
-
-dc_word_t dc_general_register (dcontext, reg)
-   dc_dcontext_t dcontext;
-   int reg;
-{
-   CHECK_REG (((dc_dcontext_t)dcontext), reg);
-   CHECK_REG_READ (((dc_dcontext_t)dcontext), reg);
-   return GET_REG_VALUE(((dc_dcontext_t)dcontext), reg);
-}
-
-
-void dc_set_general_register (dcontext, reg, value)
-   dc_dcontext_t dcontext;
-   int reg;
-   dc_word_t value;
-{
-   CHECK_REG (((dc_dcontext_t)dcontext), reg);
-   CHECK_REG_WRITE (((dc_dcontext_t)dcontext), reg);
-   SET_REG_VALUE (((dc_dcontext_t)dcontext), reg, value);
-}
-
-
-
-dc_register_state_t dc_auxiliary_register_state (dcontext, reg)
-   dc_dcontext_t dcontext;
-   int reg;
-{
-   CHECK_AUX (((dc_dcontext_t)dcontext), reg);
-   return AUX_STATE(((dc_dcontext_t)dcontext), reg);
-}
-
-
-dc_word_t dc_auxiliary_register (dcontext, reg)
-   dc_dcontext_t dcontext;
-   int reg;
-{
-   CHECK_AUX (((dc_dcontext_t)dcontext), reg);
-   CHECK_AUX_READ (((dc_dcontext_t)dcontext), reg);
-   return GET_AUX_VALUE(((dc_dcontext_t)dcontext), reg);
-}
-
-
-void dc_set_auxiliary_register (dcontext, reg, value)
-   dc_dcontext_t dcontext;
-   int reg;
-   dc_word_t value;
-{
-   CHECK_AUX (((dc_dcontext_t)dcontext), reg);
-   CHECK_AUX_WRITE (((dc_dcontext_t)dcontext), reg);
-   SET_AUX_VALUE (((dc_dcontext_t)dcontext), reg, value);
-}
-
-
-
-dc_register_state_t dc_psr_register_bit_state (dcontext, bit)
-   dc_dcontext_t dcontext;
-   int bit;
-{
-   CHECK_BIT (((dc_dcontext_t)dcontext), bit);
-   return PSR_STATE(((dc_dcontext_t)dcontext), bit);
-}
-
-
-dc_word_t dc_psr_register (dcontext)
-   dc_dcontext_t dcontext;
-{
-   if (((dc_dcontext_t)dcontext)->psr_ind) {
-      return dc_read_word(((dc_dcontext_t)dcontext)->handle,
-                       ((dc_dcontext_t)dcontext)->psr_info);
-   } else {
-      return ((dc_dcontext_t)dcontext)->psr_info;
-   }
-}
-
-
-void dc_set_psr_register (dcontext, mask, value)
-   dc_dcontext_t dcontext;
-   dc_word_t mask;
-   dc_word_t value;
-   /* Set bits of PSR corresponding to 1 bits in mask. */
-{
-   if (((dc_dcontext_t)dcontext)->psr_ind) {
-      if (((((dc_dcontext_t)dcontext)->psr_flags[0] & mask) != mask) ||
-          ((((dc_dcontext_t)dcontext)->psr_flags[1] & mask) != 0))
-         dc_error (((dc_dcontext_t)dcontext)->handle,
-            "Some PSR bits specified are not writable.");
-      dc_write_masked_word (((dc_dcontext_t)dcontext)->handle,
-                         ((dc_dcontext_t)dcontext)->psr_info, mask, value);
-   } else {
-      dc_error (((dc_dcontext_t)dcontext)->handle, "PSR is not writable.");
-   }
-}
-
-
-
-dc_word_t dc_frame_address (dcontext)
-   dc_dcontext_t dcontext;
-{
-  if (!dcontext->code_reading) {
-        tdesc_elem_t *tep = ((dc_dcontext_t)dcontext)->info_ptr.tdesc_elem_ptr;
-        return dc_general_register(dcontext,
-               tep->info.frame_address_register) + tep->info.frame_address_offset;
-  } else {
-        if (dcontext->info_ptr.cr_data_ptr->reg_val[DC_REG_FP].reg == DC_REG_SP) {
-               return (dc_general_register(dcontext,DC_REG_FP)
-                       - dcontext->info_ptr.cr_data_ptr->reg_val[DC_REG_FP].off);
-        }
-        if (dcontext->info_ptr.cr_data_ptr->reg_val[DC_REG_SP].reg == DC_REG_SP) {
-               return (dc_general_register(dcontext,DC_REG_SP)
-                       - dcontext->info_ptr.cr_data_ptr->reg_val[DC_REG_SP].off);
-        }
-     dc_error (((dc_dcontext_t)dcontext)->handle, "Cannot locate frame pointer.");
-  }
-}
-
-
-
-dc_kind_t dc_context_kind (dcontext)
-   dc_dcontext_t dcontext;
-{
-   return DC_CALL_KIND;
-}
-
-
-
-
-/* operations valid for call contexts only */
-
-
-dc_register_state_t dc_return_address_state (dcontext)
-   dc_dcontext_t dcontext;
-{
-   tdesc_elem_t *tep = ((dc_dcontext_t)dcontext)->info_ptr.tdesc_elem_ptr;
-   int reg;
-
-   if (!dcontext->code_reading) {
-         if (tep->info.return_address_info_discriminant) {
-                return DC_WRITABLE;
-         } else {
-                return REG_STATE(((dc_dcontext_t)dcontext), tep->info.return_address_info);
-         }
-   } else {
-         reg= DC_REG_RA;
-         if (bit_test(dcontext->info_ptr.cr_data_ptr->saved,DC_REG_RA)) {
-               if (bit_test(dcontext->info_ptr.cr_data_ptr->how,DC_REG_RA)) {
-                  return DC_WRITABLE;
-               } else {
-                  reg= dcontext->info_ptr.cr_data_ptr->where[DC_REG_RA];
-               }
-         }
-               return REG_STATE(((dc_dcontext_t)dcontext),reg);
-
-         
-   }
-}
-
-
-dc_exactness_t dc_return_address_exactness (dcontext)
-   dc_dcontext_t dcontext;
-{
-   return DC_MAYBE;
-}
-
-
-dc_word_t dc_return_address (dcontext)
-   dc_dcontext_t dcontext;
-   /* Return high 30 bits only. */
-{
-   tdesc_elem_t *tep = ((dc_dcontext_t)dcontext)->info_ptr.tdesc_elem_ptr;
-   dc_word_t rai = tep->info.return_address_info;
-   dc_word_t val;
-   int reg;
-
-   if (!dcontext->code_reading) {
-        if (tep->info.return_address_info_discriminant) {
-               val = dc_read_word (((dc_dcontext_t)dcontext)->handle,
-                                                dc_frame_address(dcontext) + rai);
-        } else {
-               val = dc_general_register (dcontext, rai);
-        }
-   } else {
-         reg=DC_REG_RA;
-         if (bit_test(dcontext->info_ptr.cr_data_ptr->saved,reg)) {
-                 if (bit_test(dcontext->info_ptr.cr_data_ptr->how,reg)) {
-                        val = dc_read_word (((dc_dcontext_t)dcontext)->handle,
-                                                  dc_frame_address(dcontext) + 
-                                                   (dcontext->info_ptr.cr_data_ptr->where[reg]));
-                 } else {
-                        reg= dcontext->info_ptr.cr_data_ptr->where[DC_REG_RA];
-                        val = dc_general_register (dcontext, reg);
-                 }
-         } else {
-                val = dc_general_register (dcontext, reg);
-         }
-   }
-        return val & ~3;
-}
-
-
-void dc_set_return_address (dcontext, value)
-   dc_dcontext_t dcontext;
-   dc_word_t value;
-   /* Set high 30 bits only. */
-{
-  if (!dcontext->code_reading) {
-        tdesc_elem_t *tep = ((dc_dcontext_t)dcontext)->info_ptr.tdesc_elem_ptr;
-        dc_word_t rai = tep->info.return_address_info;
-
-        if (tep->info.return_address_info_discriminant) {
-               dc_write_masked_word (((dc_dcontext_t)dcontext)->handle,
-                  dc_frame_address(dcontext) + rai, ~3, value);
-        } else {
-      dc_set_general_register (dcontext, rai,
-         (value & ~3) | (dc_general_register(dcontext, rai) & 3));
-   }
- } else {
-       if (bit_test(dcontext->info_ptr.cr_data_ptr->saved,DC_REG_RA)) {
-               if (bit_test(dcontext->info_ptr.cr_data_ptr->how,DC_REG_RA)) {
-                  dc_write_masked_word (((dc_dcontext_t)dcontext)->handle,
-                     dc_frame_address(dcontext)
-                          + dcontext->info_ptr.cr_data_ptr->where[DC_REG_RA], ~3, value);
-                 } else {
-                        dc_set_general_register( dcontext,
-                                                                 dcontext->info_ptr.cr_data_ptr->where[DC_REG_RA]);
-                 }
-         } else {
-                 dc_set_general_register( dcontext,
-                                                         dcontext->info_ptr.cr_data_ptr->where[DC_REG_RA]);
-         }
-   }
-}
-
-
-
-/* operations valid for save contexts only */
-
-/* (none) */
-
-
-
-/* operations valid for exception contexts only */
-
-
-void dc_get_exception_info (dcontext, handler, datum)
-   dc_dcontext_t dcontext;
-   dc_word_t *handler;
-   dc_word_t *datum;
-{
-   dc_error (((dc_dcontext_t)dcontext)->handle,
-      "dc_get_exception_info is not yet implemented.");
-}
-
-
-
-/* operations valid for protection contexts only */
-
-
-void dc_get_protection_info (dcontext, handler, datum)
-   dc_dcontext_t dcontext;
-   dc_word_t *handler;
-   dc_word_t *datum;
-{
-   dc_error (((dc_dcontext_t)dcontext)->handle,
-      "dc_get_protection_info is not yet implemented.");
-}
-
-
-
-/* operations valid for special contexts only */
-
-
-void dc_get_special_info (dcontext, kind, datum)
-   dc_dcontext_t dcontext;
-   dc_word_t *kind;
-   dc_word_t *datum;
-{
-   dc_error (((dc_dcontext_t)dcontext)->handle,
-      "dc_get_special_info is not yet implemented.");
-}
-
-
-
-/* operations valid for all contexts (again) */
-
-
-dc_dcontext_t dc_previous_dcontext (dcontext)
-   dc_dcontext_t dcontext;
-   /* Return NULL if there is no previous context. */
-{
-   dc_dcontext_t old = (dc_dcontext_t) dcontext;
-   dcontext_info_t new;    /* to serve as temporary storage only */
-   tdesc_elem_t *tep;
-       dc_cr_data_t *cdp;
-   dc_word_t cfa;
-   int rsm;
-   dc_word_t offset;
-   dc_word_t rai;
-   int r;
-
-   if (dc_return_address_state((dc_dcontext_t)old) == DC_INVALID)
-      dc_error (old->handle, "Return address is invalid.");
-
-   if (dc_return_address((dc_dcontext_t)old) == 0)
-      return (dc_dcontext_t)NULL;  /* end of the chain */
-
-   /* Copy over old contents. */
-   new = *old;
-
-   cfa = dc_frame_address(old);
-       /* Restore stack pointer. */
-       new.reg_info[DC_REG_SP] = cfa;
-       SET_READABLE (new.reg_flags, DC_REG_SP);
-
-   /* Invalidate temporary registers. */
-   for (r = 1; r <= 13; r++) SET_INVALID (new.reg_flags, r);
-
-       if (!old->code_reading) {
-               tep = old->info_ptr.tdesc_elem_ptr;
-               /* Restore preserved registers. */
-               rsm = tep->info.register_save_mask;
-               offset = cfa + tep->info.register_save_offset;
-               for (r = 14; r <= 30; r++) {
-                       if (bit_test(rsm, 30-r)) {
-                               new.reg_info[r] = offset;
-                               SET_WRITABLE (new.reg_flags, r);
-                               offset += sizeof(dc_word_t);
-                       }
-               }
-
-               /* Set location from old return address. */
-               rai = tep->info.return_address_info;
-               if (tep->info.return_address_info_discriminant) {
-                       new.aux_info[DC_AUX_LOC] = cfa + rai;
-                       SET_WRITABLE (new.aux_flags, DC_AUX_LOC);
-               } else {
-                       new.aux_info[DC_AUX_LOC] = old->reg_info[rai];
-                       ASSIGN_RSTATE (new.aux_flags, DC_AUX_LOC, old->reg_flags, rai);
-               }
-       } else {
-               cdp = old->info_ptr.cr_data_ptr;
-               
-               /* Restore preserved registers. */
-               for (r = 14; r <= 30; r++) { 
-                       if (bit_test(cdp->saved,r)) {
-                               if (bit_test(cdp->how,r)){ /* saved in the frame */
-                                       new.reg_info[r] = cfa+cdp->where[r];
-                                       SET_WRITABLE (new.reg_flags, r);
-                               } else { /* saved in the in a register */
-                                       new.reg_info[r] = dc_general_register(old,cdp->where[r]);
-                                       ASSIGN_RSTATE (new.aux_flags, r, old->reg_flags, cdp->where[r]);
-                               }
-                       }  /* not saved, therefore, already valid , no else*/
-               }
-
-               /* Set location from old return address. */
-               if (bit_test(cdp->saved,DC_REG_RA)) {
-                       if (bit_test(cdp->how,DC_REG_RA)){ /* saved in the frame */
-                               new.aux_info[DC_AUX_LOC] = 
-                                       new.reg_info[DC_REG_RA] = cfa+cdp->where[DC_REG_RA];
-                               SET_WRITABLE (new.reg_flags, DC_REG_RA);
-                               SET_WRITABLE (new.aux_flags, DC_AUX_LOC);
-                       } else { /* saved in the in a register */
-                               new.reg_info[DC_REG_RA] =
-                                       new.aux_info[DC_AUX_LOC] =
-                                                       dc_general_register(old,cdp->where[DC_REG_RA]);
-                               ASSIGN_RSTATE (new.aux_flags, DC_AUX_LOC, 
-                                                                       old->reg_flags, cdp->where[DC_REG_RA]);
-                       }
-               } else { /* not saved, therefore, already valid , set DC_AUX_LOC only*/
-                               new.aux_info[DC_AUX_LOC] =
-                                               dc_general_register(old,DC_REG_RA);
-                               ASSIGN_RSTATE (new.aux_flags, DC_AUX_LOC, 
-                                                                       old->reg_flags, DC_REG_RA);
-               }
-       }
-
-   /* Invalidate instruction pointers. */
-   SET_INVALID (new.aux_flags, DC_AUX_SXIP);
-   SET_INVALID (new.aux_flags, DC_AUX_SNIP);
-   SET_INVALID (new.aux_flags, DC_AUX_SFIP);
-
-   /* No change to FCR registers. */
-
-   /* No change to PSR register. */
-
-   return dc_make_dcontext ((dc_handle_t)new.handle,
-                            new.reg_info, new.reg_flags,
-                            new.aux_info, new.aux_flags, new.loc_exact,
-                            new.psr_info, new.psr_ind, new.psr_flags);
-}
-
-
-
-/* extensions for nonlocal goto */
-
-#if 0
-
-typedef
-   struct label {
-      ???
-   } label_t;
-
-
-label_t dc_make_label (dcontext, location)
-   dc_dcontext_t dcontext;
-   dc_word_t location;
-{
-}
-
-#endif
-
-/* procedure for reading code */
-
-dc_read_code(loc,dc,map_info_in,cdp)
-dc_word_t loc;
-dc_dcontext_t dc;
-dc_cr_data_t *cdp;
-dc_map_info_in_t map_info_in;
-{
-dc_map_info_out_t map_info_out;
-dc_word_t pc;
-dc_boolean_t found_branch=DC_FALSE;
-dc_word_t instr;
-
-       (*dc->handle->map_fcn)(dc->handle->map_env,loc,map_info_in,&map_info_out);
-       if (map_info_out.flags & DC_MIO_ENTRY_POINT 
-               && (!(map_info_in.flags & DC_MII_PRECEDING_TDESC_END)
-                   || map_info_out.entry_point >= map_info_in.preceding_tdesc_end
-                       || map_info_out.flags & DC_MIO_LITERAL_ENTRY_POINT)) {
-          dc_init_cr_data(cdp,(tdesc_elem_t *)NULL);
-          pc= map_info_out.entry_point;
-       } else if (map_info_in.flags & DC_MII_PRECEDING_TDESC_END) { 
-               /**/
-               /* tdesc_lookup gets the tep for the preceeding tdesc information
-               /* so we call it with one less than the preceding tdesc end since
-               /* tdesc information is exclusive of the ending address
-               /**/
-          dc_init_cr_data(cdp, 
-                                          dc_tdesc_lookup(map_info_in.preceding_tdesc_end-1, 
-                                                                       ((dc_handle_t)dc->handle)->tdesc_table,
-                                                       ((dc_handle_t)dc->handle)->tdesc_table_size,
-                                                                       &map_info_in));
-          pc= map_info_in.preceding_tdesc_end;
-       } else {
-      dc_error (dc->handle, "Insufficient information for code reading.");
-       }
-       for (;;pc+=4) {
-               if (pc==loc) {
-                  return (DC_TRUE);
-               }
-               instr= dc_read_word(dc->handle,pc);
-               found_branch= dc_decode_finds_branch(dc,instr);
-               if ((map_info_out.flags & DC_MIO_PROLOGUE_END) 
-                         && (pc==map_info_out.prologue_end)) {
-                       break;
-               }
-               if (found_branch) {
-                       if (DC_MIO_IMPLICIT_PROLOGUE_END & map_info_out.flags) {
-                               break;
-                       } else {
-                       dc_error (dc->handle, "Found branch before end of prologue.");
-                       }
-               }
-       }
-       if (!(map_info_out.flags & DC_MIO_LITERAL_EPILOGUE_START)
-                && (map_info_out.epilogue_start >= loc 
-                               || !(map_info_out.flags & DC_MIO_EPILOGUE_START))) {
-               return (DC_TRUE);
-       }
-       dc_correct_cr_data(cdp,dc->handle);
-       for (pc=map_info_out.epilogue_start;pc<loc;pc+=4) {
-               instr= dc_read_word(dc->handle,pc);
-               if (dc_decode_finds_branch(dc,instr)) {
-                       return (DC_FALSE);
-               }
-       }
-       return (DC_TRUE);
-
-}
-
-
-
-dc_init_cr_data(cdp,tep)
-dc_cr_data_t *cdp;
-tdesc_elem_t *tep;
-{
-int reg;
-dc_word_t rai;
-dc_word_t raid;
-dc_word_t rsm;
-dc_word_t frpos;
-
-       if (tep){
-
-          /* Start off with all registers undefined and none saved. */
-          for (reg = 0; reg < DC_NUM_REG; reg++) {
-                 cdp->reg_val[reg].reg = DC_UNDEF;
-          }
-          cdp->saved = 0;
-
-          /* Overwrite with what tdesc element says. */
-
-          cdp->reg_val[tep->info.frame_address_register].reg = DC_REG_SP;
-          cdp->reg_val[tep->info.frame_address_register].off =
-                                 - tep->info.frame_address_offset;
-
-          rai = tep->info.return_address_info;
-          raid = tep->info.return_address_info_discriminant;
-          if (raid || rai != DC_REG_RA) {
-                 bit_set(cdp->saved,DC_REG_RA);
-                 bit_assign(cdp->how,DC_REG_RA,raid);
-                 cdp->where[DC_REG_RA] = rai;
-          }
-
-          rsm = tep->info.register_save_mask;
-          frpos = tep->info.register_save_offset;
-          for (reg = 14; reg <= 30; reg++) {
-                       if (bit_test(rsm, 30-reg)) {
-                               bit_set(cdp->saved,reg);
-                               bit_set(cdp->how,reg);
-                               cdp->where[reg] = frpos;
-                               frpos += sizeof(dc_word_t);
-                       } else {
-                                       cdp->reg_val[reg].reg = reg;
-                                       cdp->reg_val[reg].off = 0;
-                       }
-          }
-
-          cdp->reg_val[0].reg = 0;   /* guarantee what hardware does */
-          cdp->reg_val[0].off = 0;
-
-       } else {
-          /* Each register has its own initial value. */
-          for (reg = 0; reg < DC_NUM_REG; reg++) {
-                 cdp->reg_val[reg].reg = reg;
-                 cdp->reg_val[reg].off = 0;
-          }
-   /* No register is yet saved. */
-   cdp->saved = 0;
-   cdp->how = 0;
-       }
-}
-void dc_correct_cr_data(cdp,handle)
-dc_cr_data_t *cdp;
-dc_handle_t handle;
-{
-long sr,r;
-dc_word_t save_regs = 0;  /* registers used to save others */
-   for (r = 1; r < DC_REG_SP; r++) {
-      if (bit_test(cdp->saved,r) && !bit_test(cdp->how,r)) {
-         sr = cdp->where[r];
-         if (bit_test(save_regs,sr)) {
-            dc_error(handle, "Same register used to save two others.");
-        }
-         bit_set(save_regs,sr);
-      }
-   }
-   for (r = 1; r < DC_REG_FP; r++) {
-      if ((r < 14 || bit_test(cdp->saved,r)) && !bit_test(save_regs,r)) {
-         cdp->reg_val[r].reg = DC_UNDEF;
-      }
-   }
-   if (bit_test(cdp->saved,DC_REG_FP) &&
-       cdp->reg_val[DC_REG_FP].reg == DC_REG_SP) {  /* is r30 the far? */
-      cdp->reg_val[DC_REG_SP].reg = DC_UNDEF;  /* trash sp */
-   } else if (cdp->reg_val[DC_REG_SP].reg == DC_REG_SP) { /* is r31 the far? */
-      if (bit_test(cdp->saved,DC_REG_FP) && !bit_test(save_regs,DC_REG_FP)) {
-         cdp->reg_val[DC_REG_FP].reg = DC_UNDEF;  /* trash r30 */
-      }
-   }
-}
diff --git a/gdb/tdesc.h b/gdb/tdesc.h
deleted file mode 100755 (executable)
index 3936330..0000000
+++ /dev/null
@@ -1,329 +0,0 @@
-/* This file has been modified by Data General Corporation, November 1989. */
-
-#ifndef _tdesc_h
-#define _tdesc_h
-#ifdef __STDC__ 
-#define _ARGS(x)       x
-#else
-#define _ARGS(x)       ()
-#endif
-
-/*
-      This file provides an abstract interface to "tdesc" information.
-      It is designed to be used in a uniform manner by several kinds
-      of debuggers:
-         (1) code in live debugged process (e.g., a traceback routine)
-         (2) a separate-process debugger debugging a live process
-         (3) a separate-process debugger debugging a memory dump
-
-      Dcontext model notes
-         * captures machine context
-            * partial: excludes memory
-         * frames
-            * kinds
-         * make one for starters, chain in reverse order to previous ones
-         * representation: pointer to opaque
-            * alloc/free protocol
-
-      Overall model
-         * access functions
-         * handle
-         * error handling
-*/
-
-
-
-typedef int dc_boolean_t;   /* range 0 .. 1 */
-#define DC_FALSE 0
-#define DC_TRUE 1
-
-
-typedef int dc_tristate_t;  /* range 0 .. 2 */
-#define DC_NO 0
-#define DC_YES 1
-#define DC_MAYBE 2
-
-
-#define DC_MII_PRECEDING_TDESC_END   (1<<0)
-#define DC_MII_FOLLOWING_TDESC_START (1<<1)
-
-#define DC_MIO_ENTRY_POINT            (1<< 0)
-#define DC_MIO_PROLOGUE_END           (1<< 1)
-#define DC_MIO_EPILOGUE_START         (1<< 2)
-#define DC_MIO_IMPLICIT_PROLOGUE_END  (1<<16)
-#define DC_MIO_LITERAL_ENTRY_POINT    (1<<17)
-#define DC_MIO_LITERAL_EPILOGUE_START (1<<18)
-
-
-/*
-   A word is 32 bits of information.  In memory, a word is word-aligned.
-
-   A common and important use of word_t is to represent values in the
-   target process, including (byte) addresses in the target process.
-   In this case, C arithmetic can be used to simulate machine address
-   arithmetic on the target.  (Unsigned arithmetic is actually modulus
-   arithmetic.)
-*/
-typedef unsigned int dc_word_t;
-
-
-/*----------------*/
-
-
-/* The exactness of locations may not be certainly known. */
-typedef dc_tristate_t dc_exactness_t;
-
-
-/*
-   The model includes five kinds of contexts.  Because each context
-   has an associated region and frame, these describe region kinds
-   and frame kinds as well.
-   [more description needed]
-   Currently, only call contexts exist.
-*/
-
-typedef int dc_kind_t;   /* range 0 .. 4 */
-#define DC_CALL_KIND          0
-#define DC_SAVE_KIND          1
-#define DC_EXCEPTION_KIND     2
-#define DC_PROTECTION_KIND    3
-#define DC_SPECIAL_KIND       4
-#define DC_NUM_KINDS          5
-
-
-typedef struct dc_debug_info {
-   unsigned int            protocol;            /* 1 for this structure */
-   dc_word_t               tdesc_ptr;
-   unsigned int            text_words_count;
-   dc_word_t               text_words_ptr;
-   unsigned int            data_words_count;
-   dc_word_t               data_words_ptr;
-} dc_debug_info_t;
-
-
-typedef struct dc_mstate {
-   dc_word_t reg[32];                      /* general registers */
-   dc_word_t xip;
-   dc_word_t nip;
-   dc_word_t fip;
-   dc_word_t fpsr;
-   dc_word_t fpcr;
-   dc_word_t psr;
-} dc_mstate_t;
-
-
-
-#if 0
-
-   void error_fcn (env, continuable, message)
-      dc_word_t env;                       /* environment (arbitrary datum) */
-      boolean_t continuable;            /* whether error function may return */
-      char *message;                    /* string (no trailing newline) */
-
-   /* In the future, we probably want the error_fcn to be: */
-   void error_fcn (env, continuable, code, ...)
-      dc_word_t env;                       /* environment (arbitrary datum) */
-      boolean_t continuable;            /* whether error function may return */
-      int code;                         /* error code */
-      ...                               /* parameters to message associated
-                                           with the code */
-
-   void read_fcn (env, memory, length, buffer)
-      dc_word_t env;                       /* environment (arbitrary datum) */
-      dc_word_t memory;                    /* start address in image */
-      int length;                       /* in bytes */
-      char *buffer;                     /* start address of buffer */
-      /* There are no alignment assumptions for the read function. */
-
-   void write_fcn (env, memory, length, buffer)
-      dc_word_t env;                       /* environment (arbitrary datum) */
-      dc_word_t memory;                    /* start address in image */
-      int length;                       /* in bytes */
-      char *buffer;                     /* start address of buffer */
-      /* There are no alignment assumptions for the write function. */
-      /* The write function is optional.  It must be provided if changes
-         to writable registers are to be made. */
-
-   void exec_fcn (env, mstate)
-      dc_word_t env;                       /* environment (arbitrary datum) */
-      dc_mstate_t *mstate;              /* machine state (read-write) */
-      /* The execute function is optional.  It would be used (in the future)
-         by the implementation of a procedurally specified tdesc mechanism. */
-
-#endif
-
-/*----------------*/
-
-
-typedef struct dc_map_info_in {
-   dc_word_t flags;
-   dc_word_t preceding_tdesc_end;
-   dc_word_t following_tdesc_start;
-} dc_map_info_in_t;
-
-
-typedef struct dc_map_info_out {
-   dc_word_t flags;
-   dc_word_t entry_point;
-   dc_word_t prologue_end;
-   dc_word_t epilogue_start;
-} dc_map_info_out_t;
-
-
-typedef void *dc_handle_t;
-
-typedef void (*tdesc_error_fcn_type) _ARGS((
-      dc_word_t env,                   /* environment (arbitrary datum) */
-      dc_boolean_t continuable,        /* whether error function may return */
-      const char *message              /* string (no trailing newline) */
-));
-typedef void (*tdesc_io_fcn_type) _ARGS((
-      dc_word_t env,                       /* environment (arbitrary datum) */
-      dc_word_t memory,                    /* start address in image */
-      int length,                       /* in bytes */
-      void *buffer                     /* start address of buffer */
-));
-typedef void (*tdesc_exec_fcn_type) _ARGS((
-      dc_word_t env,                       /* environment (arbitrary datum) */
-      dc_mstate_t *mstate              /* machine state (read-write) */
-));
-typedef void (*tdesc_map_fcn_type) _ARGS((
-      dc_word_t map_env,
-      dc_word_t loc,
-      dc_map_info_in_t map_info_in,
-      dc_map_info_out_t *map_info_out
-));
-
-
-extern dc_handle_t dc_initiate _ARGS((
-   dc_word_t debug_info_ptr,
-   tdesc_error_fcn_type error_fcn,
-   dc_word_t error_env,
-   tdesc_io_fcn_type read_fcn,
-   dc_word_t read_env,
-   tdesc_io_fcn_type write_fcn, /* NULL => absent */
-   dc_word_t write_env,
-   tdesc_exec_fcn_type exec_fcn, /* NULL => absent */
-   dc_word_t exec_env,
-   tdesc_map_fcn_type map_fcn, /* NULL => absent */
-   dc_word_t map_env
-));
-extern void dc_terminate _ARGS((
-   dc_handle_t handle
-));
-
-typedef int dc_register_state_t;    /* range 0 to 2 */
-
-#define DC_INVALID  0
-#define DC_READABLE 1
-#define DC_WRITABLE 2
-
-#define DC_NUM_REG 32
-
-#define DC_AUX_LOC  0
-#define DC_AUX_SXIP 1
-#define DC_AUX_SNIP 2
-#define DC_AUX_SFIP 3
-#define DC_AUX_FPSR 4
-#define DC_AUX_FPCR 5
-#define DC_NUM_AUX  6
-
-
-typedef void *dc_dcontext_t;
-
-extern dc_dcontext_t dc_make_dcontext _ARGS((
-   dc_handle_t handle,
-   dc_word_t reg_info[DC_NUM_REG],
-   dc_word_t reg_flags[2],
-   dc_word_t aux_info[DC_NUM_AUX],
-   dc_word_t aux_flags[2],
-   dc_exactness_t loc_exact,
-   dc_word_t psr_info,
-   dc_boolean_t psr_ind,
-   dc_word_t psr_flags[2]
-));
-extern void dc_free_dcontext _ARGS((
-   dc_dcontext_t dcontext
-));
-extern dc_register_state_t dc_location_state _ARGS((
-   dc_dcontext_t dcontext
-));
-extern dc_exactness_t dc_location_exactness _ARGS((
-   dc_dcontext_t dcontext
-));
-extern dc_word_t dc_location _ARGS((
-   dc_dcontext_t dcontext
-));
-extern void dc_set_location _ARGS((
-   dc_dcontext_t dcontext,
-   dc_word_t value
-));
-extern dc_register_state_t dc_general_register_state _ARGS((
-   dc_dcontext_t dcontext,
-   int reg
-));
-extern dc_word_t dc_general_register _ARGS((
-   dc_dcontext_t dcontext,
-   int reg
-));
-extern void dc_set_general_register _ARGS((
-   dc_dcontext_t dcontext,
-   int reg,
-   dc_word_t value
-));
-extern dc_register_state_t dc_auxiliary_register_state _ARGS((
-   dc_dcontext_t dcontext,
-   int reg
-));
-extern dc_word_t dc_auxiliary_register _ARGS((
-   dc_dcontext_t dcontext,
-   int reg
-));
-extern void dc_set_auxiliary_register _ARGS((
-   dc_dcontext_t dcontext,
-   int reg,
-   dc_word_t value
-));
-extern dc_register_state_t dc_psr_register_bit_state _ARGS((
-   dc_dcontext_t dcontext,
-   int bit
-));
-extern dc_word_t dc_psr_register _ARGS((
-   dc_dcontext_t dcontext
-));
-extern void dc_set_psr_register _ARGS((
-   dc_dcontext_t dcontext,
-   dc_word_t mask,
-   dc_word_t value
-));
-extern dc_word_t dc_frame_address _ARGS((
-   dc_dcontext_t dcontext
-));
-extern dc_kind_t dc_context_kind _ARGS((
-   dc_dcontext_t dcontext
-));
-extern dc_register_state_t dc_return_address_state _ARGS((
-   dc_dcontext_t dcontext
-));
-extern dc_exactness_t dc_return_address_exactness _ARGS((
-   dc_dcontext_t dcontext
-));
-extern dc_word_t dc_return_address _ARGS((
-   dc_dcontext_t dcontext
-));
-extern void dc_set_return_address _ARGS((
-   dc_dcontext_t dcontext,
-   dc_word_t value
-));
-extern void dc_get_exception_info();
-extern void dc_get_protection_info();
-extern void dc_get_special_info();
-extern dc_dcontext_t dc_previous_dcontext _ARGS((
-   dc_dcontext_t dcontext
-));
-extern dc_boolean_t dc_location_in_text_chunk _ARGS((
-   dc_dcontext_t dcontext,
-   dc_word_t value
-));
-
-#endif
diff --git a/gdb/tm-altosgas.h b/gdb/tm-altosgas.h
deleted file mode 100644 (file)
index c20030c..0000000
+++ /dev/null
@@ -1,24 +0,0 @@
-/* Definitions to make GDB run on an Altos 3068 using COFF encapsulation.
-   Copyright (C) 1989, 1991 Free Software Foundation, Inc.
-
-This file is part of GDB.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-#define COFF_ENCAPSULATE
-
-#include "m-altos.h"
-
-#define NAMES_HAVE_UNDERSCORE
index 577bb9b..e69de29 100644 (file)
@@ -1,6 +0,0 @@
-/* Parameters for execution on an HP PA-RISC machine running BSD, for GDB.
-   Contributed by the Center for Software Science at the
-   University of Utah (pa-gdb-bugs@cs.utah.edu).  */
-
-/* It's all just the common stuff.  */
-#include "tm-hppa.h"
index 130365d..e69de29 100644 (file)
@@ -1,39 +0,0 @@
-/* Parameters for execution on an HP PA-RISC machine, running HPUX, for GDB.
-   Copyright 1991, 1992 Free Software Foundation, Inc. 
-
-   Contributed by the Center for Software Science at the
-   University of Utah (pa-gdb-bugs@cs.utah.edu).
-
-This file is part of GDB.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-/* Mostly it's common to all HPPA's.  */
-#include "tm-hppa.h"
-
-/* Saved PC's are different, since there is millicode.  */
-extern CORE_ADDR millicode_start, millicode_end;
-
-/* Immediately after a function call, return the saved pc.
-   Can't go through the frames for this because on some machines
-   the new frame is not set up until the new function executes
-   some instructions.  */
-
-#undef SAVED_PC_AFTER_CALL
-#define SAVED_PC_AFTER_CALL(frame)              \
-  ((get_frame_pc (frame) >= millicode_start     \
-    && get_frame_pc (frame) < millicode_end) ?  \
-   read_register (31) & ~3                      \
-   : read_register (RP_REGNUM) & ~3)
diff --git a/gdb/tm-i386v-g.h b/gdb/tm-i386v-g.h
deleted file mode 100644 (file)
index 669284a..0000000
+++ /dev/null
@@ -1,32 +0,0 @@
-/* Macro definitions for i386 using the GNU object file format.
-   Copyright (C) 1986, 1987, 1989, 1991 Free Software Foundation, Inc.
-
-This file is part of GDB.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-/*
- * Changes for 80386 by Pace Willisson (pace@prep.ai.mit.edu)
- * July 1988
- * 
- * i386gnu: COFF_ENCAPSULATE
- */
-
-
-#define COFF_ENCAPSULATE
-
-#include "tm-i386v.h"
-
-#define NAMES_HAVE_UNDERSCORE
index 942fb87..e69de29 100644 (file)
@@ -1,54 +0,0 @@
-/* Macro definitions for GDB for a Sun 4 running SunOS 5.
-   Copyright (C) 1989, 1992 Free Software Foundation, Inc.
-
-This file is part of GDB.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-#include "tm-sparc.h"
-
-#include "tm-sysv4.h"
-
-#undef STACK_END_ADDRESS
-#define STACK_END_ADDRESS 0xf8000000
-
-#if 0          /* Setjmp/longjmp are not as well doc'd in SunOS 5.x yet */
-
-/* Offsets into jmp_buf.  Not defined by Sun, but at least documented in a
-   comment in <machine/setjmp.h>! */
-
-#define JB_ELEMENT_SIZE 4      /* Size of each element in jmp_buf */
-
-#define JB_ONSSTACK 0
-#define JB_SIGMASK 1
-#define JB_SP 2
-#define JB_PC 3
-#define JB_NPC 4
-#define JB_PSR 5
-#define JB_G1 6
-#define JB_O0 7
-#define JB_WBCNT 8
-
-/* Figure out where the longjmp will land.  We expect that we have just entered
-   longjmp and haven't yet setup the stack frame, so the args are still in the
-   output regs.  %o0 (O0_REGNUM) points at the jmp_buf structure from which we
-   extract the pc (JB_PC) that we will land at.  The pc is copied into ADDR.
-   This routine returns true on success */
-
-extern int
-get_longjmp_target PARAMS ((CORE_ADDR *));
-
-#define GET_LONGJMP_TARGET(ADDR) get_longjmp_target(ADDR)
-#endif  /* 0 */
index f1eea20..e69de29 100755 (executable)
@@ -1,37 +0,0 @@
-/* Macro definitions for GDB on all SVR4 target systems.
-   Copyright (C) 1991, Free Software Foundation, Inc.
-   Written by Fred Fish at Cygnus Support (fnf@cygint)
-
-This file is part of GDB.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-/* Support for SVR4 shared libraries. */
-
-#define CLEAR_SOLIB                    clear_solib
-extern void clear_solib ();                    /* solib.c */
-
-#define SOLIB_ADD(filename, from_tty, targ) solib_add (filename, from_tty, targ)
-extern void solib_add ();                      /* solib.c */
-
-#define SOLIB_CREATE_INFERIOR_HOOK     solib_create_inferior_hook
-extern void solib_create_inferior_hook();      /* solib.c */
-
-/* If we can't set a breakpoint, and it's in a shared library, just
-   disable it.  */
-
-#define DISABLE_UNSETTABLE_BREAK(addr) solib_address(addr)
-extern int solib_address ();                   /* solib.c */
-
diff --git a/gdb/tm-vxworks68.h b/gdb/tm-vxworks68.h
deleted file mode 100755 (executable)
index a3cd7c2..0000000
+++ /dev/null
@@ -1,48 +0,0 @@
-/* Parameters for execution on VxWorks 68k's, for GDB, the GNU debugger.
-   Copyright (C) 1986, 1987, 1989, 1991 Free Software Foundation, Inc.
-   Contributed by Cygnus Support.
-
-This file is part of GDB.
-
-GDB is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 1, or (at your option)
-any later version.
-
-GDB is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with GDB; see the file COPYING.  If not, write to
-the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-#define        GDBINIT_FILENAME        ".vxgdbinit"
-
-#define        DEFAULT_PROMPT          "(vxgdb) "
-
-/* Kludge... */
-#include "tm-sun3.h"
-
-/* We have more complex, useful breakpoints on the target.  */
-#undef DECR_PC_AFTER_BREAK
-#define        DECR_PC_AFTER_BREAK     0
-
-/* We are guaranteed to have a zero frame pointer at bottom of stack, too. */
-#undef FRAME_CHAIN
-#undef FRAME_CHAIN_VALID
-
-/* Takes the current frame-struct pointer and returns the chain-pointer
-   to get to the calling frame.
-
-   If our current frame pointer is zero, we're at the top; else read out
-   the saved FP from memory pointed to by the current FP.  */
-
-#define FRAME_CHAIN(thisframe) ((thisframe)->frame? read_memory_integer ((thisframe)->frame, 4): 0)
-
-/* If the chain pointer is zero (either because the saved value fetched
-   by FRAME_CHAIN was zero, or because the current FP was zero so FRAME_CHAIN
-   never fetched anything), we are at the top of the stack.  */
-
-#define FRAME_CHAIN_VALID(chain, thisframe) (chain != 0)
diff --git a/gdb/tm-vxworks960.h b/gdb/tm-vxworks960.h
deleted file mode 100755 (executable)
index fc5c214..0000000
+++ /dev/null
@@ -1,48 +0,0 @@
-/* Parameters for VxWorks Intel 960's, for GDB, the GNU debugger.
-   Copyright (C) 1986-1991 Free Software Foundation, Inc.
-   Contributed by Cygnus Support.
-
-This file is part of GDB.
-
-GDB is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 1, or (at your option)
-any later version.
-
-GDB is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with GDB; see the file COPYING.  If not, write to
-the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-#include "tm-i960.h"
-
-#define        GDBINIT_FILENAME        ".vxgdbinit"
-
-#define        DEFAULT_PROMPT          "(vxgdb) "
-
-/* We have more complex, useful breakpoints on the target.
-   Amount ip must be decremented by after a breakpoint.  */
-
-#define        DECR_PC_AFTER_BREAK     0
-
-/* We are guaranteed to have a zero frame pointer at bottom of stack, too. */
-
-#define FRAME_CHAIN_VALID(chain, thisframe) (chain != 0)
-
-/* Breakpoint patching is handled at the target end in VxWorks.  */
-/* #define BREAKPOINT {0x00, 0x3e, 0x00, 0x66} */
-
-/* Not needed, because we don't support core files:
-       #define KERNEL_U_ADDR
-       #define REGISTER_U_ADDR(addr, blockend, regno)
- */
-
-/* Address of end of stack space.
-       This doesn't matter for VxWorks, because it's only used
-       in manipulation of core files, which we don't support.  */
-
-/* #define STACK_END_ADDR (0xfe000000) */
diff --git a/gdb/vax-opcode.h b/gdb/vax-opcode.h
deleted file mode 100755 (executable)
index 594e635..0000000
+++ /dev/null
@@ -1,382 +0,0 @@
-/* Vax opcde list.
-   Copyright (C) 1989, Free Software Foundation, Inc.
-
-This file is part of GDB and GAS.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-#ifndef vax_opcodeT
-#define vax_opcodeT int
-#endif /* no vax_opcodeT */
-
-struct vot_wot                 /* vax opcode table: wot to do with this */
-                               /* particular opcode */
-{
-  char *            args;      /* how to compile said opcode */
-  vax_opcodeT       code;      /* op-code (may be > 8 bits!) */
-};
-
-struct vot                     /* vax opcode text */
-{
-  char *            name;      /* opcode name: lowercase string  [key]  */
-  struct vot_wot    detail;    /* rest of opcode table          [datum] */
-};
-
-#define vot_how args
-#define vot_code code
-#define vot_detail detail
-#define vot_name name
-
-const static struct vot
-votstrs[] =
-{
-{    "halt",   {"",                    0x00    } },
-{    "nop",    {"",                    0x01    } },
-{    "rei",    {"",                    0x02    } },
-{    "bpt",    {"",                    0x03    } },
-{    "ret",    {"",                    0x04    } },
-{    "rsb",    {"",                    0x05    } },
-{    "ldpctx", {"",                    0x06    } },
-{    "svpctx", {"",                    0x07    } },
-{    "cvtps",  {"rwabrwab",            0x08    } },
-{    "cvtsp",  {"rwabrwab",            0x09    } },
-{    "index",  {"rlrlrlrlrlwl",        0x0a    } },
-{    "crc",    {"abrlrwab",            0x0b    } },
-{    "prober", {"rbrwab",              0x0c    } },
-{    "probew", {"rbrwab",              0x0d    } },
-{    "insque", {"abab",                0x0e    } },
-{    "remque", {"abwl",                0x0f    } },
-{    "bsbb",   {"bb",                  0x10    } },
-{    "brb",    {"bb",                  0x11    } },
-{    "bneq",   {"bb",                  0x12    } },
-{    "bnequ",  {"bb",                  0x12    } },
-{    "beql",   {"bb",                  0x13    } },
-{    "beqlu",  {"bb",                  0x13    } },
-{    "bgtr",   {"bb",                  0x14    } },
-{    "bleq",   {"bb",                  0x15    } },
-{    "jsb",    {"ab",                  0x16    } },
-{    "jmp",    {"ab",                  0x17    } },
-{    "bgeq",   {"bb",                  0x18    } },
-{    "blss",   {"bb",                  0x19    } },
-{    "bgtru",  {"bb",                  0x1a    } },
-{    "blequ",  {"bb",                  0x1b    } },
-{    "bvc",    {"bb",                  0x1c    } },
-{    "bvs",    {"bb",                  0x1d    } },
-{    "bcc",    {"bb",                  0x1e    } },
-{    "bgequ",  {"bb",                  0x1e    } },
-{    "blssu",  {"bb",                  0x1f    } },
-{    "bcs",    {"bb",                  0x1f    } },
-{    "addp4",  {"rwabrwab",            0x20    } },
-{    "addp6",  {"rwabrwabrwab",        0x21    } },
-{    "subp4",  {"rwabrwab",            0x22    } },
-{    "subp6",  {"rwabrwabrwab",        0x23    } },
-{    "cvtpt",  {"rwababrwab",          0x24    } },
-{    "mulp",   {"rwabrwabrwab",        0x25    } },
-{    "cvttp",  {"rwababrwab",          0x26    } },
-{    "divp",   {"rwabrwabrwab",        0x27    } },
-{    "movc3",  {"rwabab",              0x28    } },
-{    "cmpc3",  {"rwabab",              0x29    } },
-{    "scanc",  {"rwababrb",            0x2a    } },
-{    "spanc",  {"rwababrb",            0x2b    } },
-{    "movc5",  {"rwabrbrwab",          0x2c    } },
-{    "cmpc5",  {"rwabrbrwab",          0x2d    } },
-{    "movtc",  {"rwabrbabrwab",        0x2e    } },
-{    "movtuc", {"rwabrbabrwab",        0x2f    } },
-{    "bsbw",   {"bw",                  0x30    } },
-{    "brw",    {"bw",                  0x31    } },
-{    "cvtwl",  {"rwwl",                0x32    } },
-{    "cvtwb",  {"rwwb",                0x33    } },
-{    "movp",   {"rwabab",              0x34    } },
-{    "cmpp3",  {"rwabab",              0x35    } },
-{    "cvtpl",  {"rwabwl",              0x36    } },
-{    "cmpp4",  {"rwabrwab",            0x37    } },
-{    "editpc", {"rwababab",            0x38    } },
-{    "matchc", {"rwabrwab",            0x39    } },
-{    "locc",   {"rbrwab",              0x3a    } },
-{    "skpc",   {"rbrwab",              0x3b    } },
-{    "movzwl", {"rwwl",                0x3c    } },
-{    "acbw",   {"rwrwmwbw",            0x3d    } },
-{    "movaw",  {"awwl",                0x3e    } },
-{    "pushaw", {"aw",                  0x3f    } },
-{    "addf2",  {"rfmf",                0x40    } },
-{    "addf3",  {"rfrfwf",              0x41    } },
-{    "subf2",  {"rfmf",                0x42    } },
-{    "subf3",  {"rfrfwf",              0x43    } },
-{    "mulf2",  {"rfmf",                0x44    } },
-{    "mulf3",  {"rfrfwf",              0x45    } },
-{    "divf2",  {"rfmf",                0x46    } },
-{    "divf3",  {"rfrfwf",              0x47    } },
-{    "cvtfb",  {"rfwb",                0x48    } },
-{    "cvtfw",  {"rfww",                0x49    } },
-{    "cvtfl",  {"rfwl",                0x4a    } },
-{    "cvtrfl", {"rfwl",                0x4b    } },
-{    "cvtbf",  {"rbwf",                0x4c    } },
-{    "cvtwf",  {"rwwf",                0x4d    } },
-{    "cvtlf",  {"rlwf",                0x4e    } },
-{    "acbf",   {"rfrfmfbw",            0x4f    } },
-{    "movf",   {"rfwf",                0x50    } },
-{    "cmpf",   {"rfrf",                0x51    } },
-{    "mnegf",  {"rfwf",                0x52    } },
-{    "tstf",   {"rf",                  0x53    } },
-{    "emodf",  {"rfrbrfwlwf",          0x54    } },
-{    "polyf",  {"rfrwab",              0x55    } },
-{    "cvtfd",  {"rfwd",                0x56    } },
-                                        /* opcode 57 is not defined yet */
-{    "adawi",  {"rwmw",                0x58    } },
-                                        /* opcode 59 is not defined yet */
-                                        /* opcode 5a is not defined yet */
-                                        /* opcode 5b is not defined yet */
-{    "insqhi", {"abaq",                0x5c    } },
-{    "insqti", {"abaq",                0x5d    } },
-{    "remqhi", {"aqwl",                0x5e    } },
-{    "remqti", {"aqwl",                0x5f    } },
-{    "addd2",  {"rdmd",                0x60    } },
-{    "addd3",  {"rdrdwd",              0x61    } },
-{    "subd2",  {"rdmd",                0x62    } },
-{    "subd3",  {"rdrdwd",              0x63    } },
-{    "muld2",  {"rdmd",                0x64    } },
-{    "muld3",  {"rdrdwd",              0x65    } },
-{    "divd2",  {"rdmd",                0x66    } },
-{    "divd3",  {"rdrdwd",              0x67    } },
-{    "cvtdb",  {"rdwb",                0x68    } },
-{    "cvtdw",  {"rdww",                0x69    } },
-{    "cvtdl",  {"rdwl",                0x6a    } },
-{    "cvtrdl", {"rdwl",                0x6b    } },
-{    "cvtbd",  {"rbwd",                0x6c    } },
-{    "cvtwd",  {"rwwd",                0x6d    } },
-{    "cvtld",  {"rlwd",                0x6e    } },
-{    "acbd",   {"rdrdmdbw",            0x6f    } },
-{    "movd",   {"rdwd",                0x70    } },
-{    "cmpd",   {"rdrd",                0x71    } },
-{    "mnegd",  {"rdwd",                0x72    } },
-{    "tstd",   {"rd",                  0x73    } },
-{    "emodd",  {"rdrbrdwlwd",          0x74    } },
-{    "polyd",  {"rdrwab",              0x75    } },
-{    "cvtdf",  {"rdwf",                0x76    } },
-                                        /* opcode 77 is not defined yet */
-{    "ashl",   {"rbrlwl",              0x78    } },
-{    "ashq",   {"rbrqwq",              0x79    } },
-{    "emul",   {"rlrlrlwq",            0x7a    } },
-{    "ediv",   {"rlrqwlwl",            0x7b    } },
-{    "clrd",   {"wd",                  0x7c    } },
-{    "clrg",   {"wg",                  0x7c    } },
-{    "clrq",   {"wd",                  0x7c    } },
-{    "movq",   {"rqwq",                0x7d    } },
-{    "movaq",  {"aqwl",                0x7e    } },
-{    "movad",  {"adwl",                0x7e    } },
-{    "pushaq", {"aq",                  0x7f    } },
-{    "pushad", {"ad",                  0x7f    } },
-{    "addb2",  {"rbmb",                0x80    } },
-{    "addb3",  {"rbrbwb",              0x81    } },
-{    "subb2",  {"rbmb",                0x82    } },
-{    "subb3",  {"rbrbwb",              0x83    } },
-{    "mulb2",  {"rbmb",                0x84    } },
-{    "mulb3",  {"rbrbwb",              0x85    } },
-{    "divb2",  {"rbmb",                0x86    } },
-{    "divb3",  {"rbrbwb",              0x87    } },
-{    "bisb2",  {"rbmb",                0x88    } },
-{    "bisb3",  {"rbrbwb",              0x89    } },
-{    "bicb2",  {"rbmb",                0x8a    } },
-{    "bicb3",  {"rbrbwb",              0x8b    } },
-{    "xorb2",  {"rbmb",                0x8c    } },
-{    "xorb3",  {"rbrbwb",              0x8d    } },
-{    "mnegb",  {"rbwb",                0x8e    } },
-{    "caseb",  {"rbrbrb",              0x8f    } },
-{    "movb",   {"rbwb",                0x90    } },
-{    "cmpb",   {"rbrb",                0x91    } },
-{    "mcomb",  {"rbwb",                0x92    } },
-{    "bitb",   {"rbrb",                0x93    } },
-{    "clrb",   {"wb",                  0x94    } },
-{    "tstb",   {"rb",                  0x95    } },
-{    "incb",   {"mb",                  0x96    } },
-{    "decb",   {"mb",                  0x97    } },
-{    "cvtbl",  {"rbwl",                0x98    } },
-{    "cvtbw",  {"rbww",                0x99    } },
-{    "movzbl", {"rbwl",                0x9a    } },
-{    "movzbw", {"rbww",                0x9b    } },
-{    "rotl",   {"rbrlwl",              0x9c    } },
-{    "acbb",   {"rbrbmbbw",            0x9d    } },
-{    "movab",  {"abwl",                0x9e    } },
-{    "pushab", {"ab",                  0x9f    } },
-{    "addw2",  {"rwmw",                0xa0    } },
-{    "addw3",  {"rwrwww",              0xa1    } },
-{    "subw2",  {"rwmw",                0xa2    } },
-{    "subw3",  {"rwrwww",              0xa3    } },
-{    "mulw2",  {"rwmw",                0xa4    } },
-{    "mulw3",  {"rwrwww",              0xa5    } },
-{    "divw2",  {"rwmw",                0xa6    } },
-{    "divw3",  {"rwrwww",              0xa7    } },
-{    "bisw2",  {"rwmw",                0xa8    } },
-{    "bisw3",  {"rwrwww",              0xa9    } },
-{    "bicw2",  {"rwmw",                0xaa    } },
-{    "bicw3",  {"rwrwww",              0xab    } },
-{    "xorw2",  {"rwmw",                0xac    } },
-{    "xorw3",  {"rwrwww",              0xad    } },
-{    "mnegw",  {"rwww",                0xae    } },
-{    "casew",  {"rwrwrw",              0xaf    } },
-{    "movw",   {"rwww",                0xb0    } },
-{    "cmpw",   {"rwrw",                0xb1    } },
-{    "mcomw",  {"rwww",                0xb2    } },
-{    "bitw",   {"rwrw",                0xb3    } },
-{    "clrw",   {"ww",                  0xb4    } },
-{    "tstw",   {"rw",                  0xb5    } },
-{    "incw",   {"mw",                  0xb6    } },
-{    "decw",   {"mw",                  0xb7    } },
-{    "bispsw", {"rw",                  0xb8    } },
-{    "bicpsw", {"rw",                  0xb9    } },
-{    "popr",   {"rw",                  0xba    } },
-{    "pushr",  {"rw",                  0xbb    } },
-{    "chmk",   {"rw",                  0xbc    } },
-{    "chme",   {"rw",                  0xbd    } },
-{    "chms",   {"rw",                  0xbe    } },
-{    "chmu",   {"rw",                  0xbf    } },
-{    "addl2",  {"rlml",                0xc0    } },
-{    "addl3",  {"rlrlwl",              0xc1    } },
-{    "subl2",  {"rlml",                0xc2    } },
-{    "subl3",  {"rlrlwl",              0xc3    } },
-{    "mull2",  {"rlml",                0xc4    } },
-{    "mull3",  {"rlrlwl",              0xc5    } },
-{    "divl2",  {"rlml",                0xc6    } },
-{    "divl3",  {"rlrlwl",              0xc7    } },
-{    "bisl2",  {"rlml",                0xc8    } },
-{    "bisl3",  {"rlrlwl",              0xc9    } },
-{    "bicl2",  {"rlml",                0xca    } },
-{    "bicl3",  {"rlrlwl",              0xcb    } },
-{    "xorl2",  {"rlml",                0xcc    } },
-{    "xorl3",  {"rlrlwl",              0xcd    } },
-{    "mnegl",  {"rlwl",                0xce    } },
-{    "casel",  {"rlrlrl",              0xcf    } },
-{    "movl",   {"rlwl",                0xd0    } },
-{    "cmpl",   {"rlrl",                0xd1    } },
-{    "mcoml",  {"rlwl",                0xd2    } },
-{    "bitl",   {"rlrl",                0xd3    } },
-{    "clrf",   {"wf",                  0xd4    } },
-{    "clrl",   {"wl",                  0xd4    } },
-{    "tstl",   {"rl",                  0xd5    } },
-{    "incl",   {"ml",                  0xd6    } },
-{    "decl",   {"ml",                  0xd7    } },
-{    "adwc",   {"rlml",                0xd8    } },
-{    "sbwc",   {"rlml",                0xd9    } },
-{    "mtpr",   {"rlrl",                0xda    } },
-{    "mfpr",   {"rlwl",                0xdb    } },
-{    "movpsl", {"wl",                  0xdc    } },
-{    "pushl",  {"rl",                  0xdd    } },
-{    "moval",  {"alwl",                0xde    } },
-{    "movaf",  {"afwl",                0xde    } },
-{    "pushal", {"al",                  0xdf    } },
-{    "pushaf", {"af",                  0xdf    } },
-{    "bbs",    {"rlabbb",              0xe0    } },
-{    "bbc",    {"rlabbb",              0xe1    } },
-{    "bbss",   {"rlabbb",              0xe2    } },
-{    "bbcs",   {"rlabbb",              0xe3    } },
-{    "bbsc",   {"rlabbb",              0xe4    } },
-{    "bbcc",   {"rlabbb",              0xe5    } },
-{    "bbssi",  {"rlabbb",              0xe6    } },
-{    "bbcci",  {"rlabbb",              0xe7    } },
-{    "blbs",   {"rlbb",                0xe8    } },
-{    "blbc",   {"rlbb",                0xe9    } },
-{    "ffs",    {"rlrbvbwl",            0xea    } },
-{    "ffc",    {"rlrbvbwl",            0xeb    } },
-{    "cmpv",   {"rlrbvbrl",            0xec    } },
-{    "cmpzv",  {"rlrbvbrl",            0xed    } },
-{    "extv",   {"rlrbvbwl",            0xee    } },
-{    "extzv",  {"rlrbvbwl",            0xef    } },
-{    "insv",   {"rlrlrbvb",            0xf0    } },
-{    "acbl",   {"rlrlmlbw",            0xf1    } },
-{    "aoblss", {"rlmlbb",              0xf2    } },
-{    "aobleq", {"rlmlbb",              0xf3    } },
-{    "sobgeq", {"mlbb",                0xf4    } },
-{    "sobgtr", {"mlbb",                0xf5    } },
-{    "cvtlb",  {"rlwb",                0xf6    } },
-{    "cvtlw",  {"rlww",                0xf7    } },
-{    "ashp",   {"rbrwabrbrwab",        0xf8    } },
-{    "cvtlp",  {"rlrwab",              0xf9    } },
-{    "callg",  {"abab",                0xfa    } },
-{    "calls",  {"rlab",                0xfb    } },
-{    "xfc",    {"",                    0xfc    } },
-                                        /* undefined opcodes here */
-{    "cvtdh",  {"rdwh",                0x32fd  } },
-{    "cvtgf",  {"rgwh",                0x33fd  } },
-{    "addg2",  {"rgmg",                0x40fd  } },
-{    "addg3",  {"rgrgwg",              0x41fd  } },
-{    "subg2",  {"rgmg",                0x42fd  } },
-{    "subg3",  {"rgrgwg",              0x43fd  } },
-{    "mulg2",  {"rgmg",                0x44fd  } },
-{    "mulg3",  {"rgrgwg",              0x45fd  } },
-{    "divg2",  {"rgmg",                0x46fd  } },
-{    "divg3",  {"rgrgwg",              0x47fd  } },
-{    "cvtgb",  {"rgwb",                0x48fd  } },
-{    "cvtgw",  {"rgww",                0x49fd  } },
-{    "cvtgl",  {"rgwl",                0x4afd  } },
-{    "cvtrgl", {"rgwl",                0x4bfd  } },
-{    "cvtbg",  {"rbwg",                0x4cfd  } },
-{    "cvtwg",  {"rwwg",                0x4dfd  } },
-{    "cvtlg",  {"rlwg",                0x4efd  } },
-{    "acbg",   {"rgrgmgbw",            0x4ffd  } },
-{    "movg",   {"rgwg",                0x50fd  } },
-{    "cmpg",   {"rgrg",                0x51fd  } },
-{    "mnegg",  {"rgwg",                0x52fd  } },
-{    "tstg",   {"rg",                  0x53fd  } },
-{    "emodg",  {"rgrwrgwlwg",          0x54fd  } },
-{    "polyg",  {"rgrwab",              0x55fd  } },
-{    "cvtgh",  {"rgwh",                0x56fd  } },
-                                        /* undefined opcodes here */
-{    "addh2",  {"rhmh",                0x60fd  } },
-{    "addh3",  {"rhrhwh",              0x61fd  } },
-{    "subh2",  {"rhmh",                0x62fd  } },
-{    "subh3",  {"rhrhwh",              0x63fd  } },
-{    "mulh2",  {"rhmh",                0x64fd  } },
-{    "mulh3",  {"rhrhwh",              0x65fd  } },
-{    "divh2",  {"rhmh",                0x66fd  } },
-{    "divh3",  {"rhrhwh",              0x67fd  } },
-{    "cvthb",  {"rhwb",                0x68fd  } },
-{    "cvthw",  {"rhww",                0x69fd  } },
-{    "cvthl",  {"rhwl",                0x6afd  } },
-{    "cvtrhl", {"rhwl",                0x6bfd  } },
-{    "cvtbh",  {"rbwh",                0x6cfd  } },
-{    "cvtwh",  {"rwwh",                0x6dfd  } },
-{    "cvtlh",  {"rlwh",                0x6efd  } },
-{    "acbh",   {"rhrhmhbw",            0x6ffd  } },
-{    "movh",   {"rhwh",                0x70fd  } },
-{    "cmph",   {"rhrh",                0x71fd  } },
-{    "mnegh",  {"rhwh",                0x72fd  } },
-{    "tsth",   {"rh",                  0x73fd  } },
-{    "emodh",  {"rhrwrhwlwh",          0x74fd  } },
-{    "polyh",  {"rhrwab",              0x75fd  } },
-{    "cvthg",  {"rhwg",                0x76fd  } },
-                                        /* undefined opcodes here */
-{    "clrh",   {"wh",                  0x7cfd  } },
-{    "clro",   {"wo",                  0x7cfd  } },
-{    "movo",   {"rowo",                0x7dfd  } },
-{    "movah",  {"ahwl",                0x7efd  } },
-{    "movao",  {"aowl",                0x7efd  } },
-{    "pushah", {"ah",                  0x7ffd  } },
-{    "pushao", {"ao",                  0x7ffd  } },
-                                        /* undefined opcodes here */
-{    "cvtfh",  {"rfwh",                0x98fd  } },
-{    "cvtfg",  {"rfwg",                0x99fd  } },
-                                        /* undefined opcodes here */
-{    "cvthf",  {"rhwf",                0xf6fd  } },
-{    "cvthd",  {"rhwd",                0xf7fd  } },
-                                        /* undefined opcodes here */
-{    "bugl",   {"rl",                  0xfdff  } },
-{    "bugw",   {"rw",                  0xfeff  } },
-                                        /* undefined opcodes here */
-
-{      ""       ,   ""          } /* empty is end sentinel */
-
-};                             /* votstrs */
-
-/* end: vax.opcode.h */
index 7e5a4c5..e69de29 100644 (file)
@@ -1,52 +0,0 @@
-/* Parameters for hosting on an HPPA PA-RISC machine, running BSD, for GDB.
-   Copyright 1991, 1992 Free Software Foundation, Inc. 
-
-   Contributed by the Center for Software Science at the
-   University of Utah (pa-gdb-bugs@cs.utah.edu).
-
-This file is part of GDB.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-/* This is a big-endian host.  */
-
-#define        HOST_BYTE_ORDER BIG_ENDIAN
-
-/* Avoid "INT_MIN redefined" warnings -- by defining it here, exactly
-   the same as in the system <machine/machtypes.h> file.  */
-#undef  INT_MIN
-#define INT_MIN         0x80000000
-
-#ifndef hp800
-#define USG
-#endif
-
-
-#define PUSH_ARGUMENTS(nargs, args, sp, struct_return, struct_addr) \
-    sp = hp_push_arguments(nargs, args, sp, struct_return, struct_addr)
-
-#define KERNEL_U_ADDR 0
-
-/* What a coincidence! */
-#define REGISTER_U_ADDR(addr, blockend, regno)                         \
-{ addr = (int)(blockend) + REGISTER_BYTE (regno);}
-
-#define U_REGS_OFFSET 0
-
-#ifndef SEEK_SET
-#  define SEEK_SET    0                /* Set file pointer to "offset" */
-#  define SEEK_CUR    1                /* Set file pointer to current plus "offset" */
-#  define SEEK_END    2                /* Set file pointer to EOF plus "offset" */
-#endif /* SEEK_SET */
index 83cb839..e69de29 100644 (file)
@@ -1,46 +0,0 @@
-/* Parameters for hosting on an HPPA-RISC machine running HPUX, for GDB.
-   Copyright 1991, 1992 Free Software Foundation, Inc. 
-
-   Contributed by the Center for Software Science at the
-   University of Utah (pa-gdb-bugs@cs.utah.edu).
-
-This file is part of GDB.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-/* Host is big-endian. */
-#define        HOST_BYTE_ORDER BIG_ENDIAN
-
-/* Avoid "INT_MIN redefined" warnings -- by defining it here, exactly
-   the same as in the system <machine/machtypes.h> file.  */
-#undef  INT_MIN
-#define INT_MIN         0x80000000
-
-#ifndef hp800
-#define USG
-#endif
-
-#define HAVE_TERMIO
-
-#define PUSH_ARGUMENTS(nargs, args, sp, struct_return, struct_addr) \
-    sp = hp_push_arguments(nargs, args, sp, struct_return, struct_addr)
-
-#define KERNEL_U_ADDR 0
-
-/* What a coincidence! */
-#define REGISTER_U_ADDR(addr, blockend, regno)                         \
-{ addr = (int)(blockend) + REGISTER_BYTE (regno);}
-
-#define U_REGS_OFFSET 0
index 5749319..e69de29 100644 (file)
@@ -1,61 +0,0 @@
-/* Macro definitions for running gdb on a Sun 4 running sunos 5.
-   Copyright 1989, 1992 Free Software Foundation, Inc.
-
-This file is part of GDB.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-/* Most of what we know is generic to SPARC hosts.  */
-
-#include "xm-sparc.h"
-
-/* Pick up more stuff from the generic SVR4 host include file. */
-
-#include "xm-sysv4.h"
-
-/* SVR4's can't seem to agree on what to call the type that contains the
-   general registers.  Kludge around it with a #define.  */
-
-#define        gregset_t       prgreg_t
-#define        fpregset_t      prfpregset_t
-
-/* The native Sun compiler complains about using volatile
-   to indicate functions that never return.  So shut it up by simply
-   defining away "NORETURN", which is normally defined to "volatile". */
-
-#ifndef __GNUC__
-# define NORETURN /**/
-#endif
-
-/* Large alloca's fail because the attempt to increase the stack limit in
-   main() fails because shared libraries are allocated just below the initial
-   stack limit.  The SunOS kernel will not allow the stack to grow into
-   the area occupied by the shared libraries.  Sun knows about this bug
-   but has no obvious fix for it.  */
-#define BROKEN_LARGE_ALLOCA
-
-/* If you expect to use the mmalloc package to obtain mapped symbol files,
-   for now you have to specify some parameters that determine how gdb places
-   the mappings in it's address space.  See the comments in map_to_address()
-   for details.  This is expected to only be a short term solution.  Yes it
-   is a kludge.
-   FIXME:  Make this more automatic. */
-
-#define MMAP_BASE_ADDRESS      0xE0000000      /* First mapping here */
-#define MMAP_INCREMENT         0x01000000      /* Increment to next mapping */
-
-/* These are not currently used in SVR4 (but should be, FIXME!).  */
-#undef DO_DEFERRED_STORES
-#undef CLEAR_DEFERRED_STORES
index f4c4a53..e69de29 100755 (executable)
@@ -1,56 +0,0 @@
-/* Definitions for running gdb on a host machine running any flavor of SVR4.
-   Copyright (C) 1991, Free Software Foundation, Inc.
-   Written by Fred Fish at Cygnus Support (fnf@cygint)
-
-This file is part of GDB.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-/* SVR4 has /proc support, so use it instead of ptrace. */
-
-#define USE_PROC_FS
-
-/* SVR4 has termio facilities. */
-
-#define HAVE_TERMIO
-
-/* TIOCGETC and TIOCGLTC are picked up somewhere, but struct tchars
-   and struct ltchars are not.  This makes problems for inflow.c.
-   It is unknown at this time if this is a generic SVR4 problem or
-   one just limited to the initial SVR4 port host machine. */
-
-#define TIOCGETC_BROKEN
-#define TIOCGLTC_BROKEN
-
-/* SVR4 is a derivative of System V Release 3 (USG) */
-
-#define USG
-
-/* Get rid of any system-imposed stack limit if possible.  */
-
-/* #define SET_STACK_LIMIT_HUGE */
-
-/* SVR4 machines can easily do attach and detach via /proc (procfs.c)
-   support */
-
-#define ATTACH_DETACH
-
-/* If we are using SVR4 /proc instead of ptrace, use CREATE_INFERIOR_HOOK
-   to do internal /proc initialization. */
-
-#ifdef USE_PROC_FS
-#define CREATE_INFERIOR_HOOK(pid) inferior_proc_init(pid)
-#endif
-
diff --git a/ld/Makefile b/ld/Makefile
deleted file mode 100755 (executable)
index a565bbf..0000000
+++ /dev/null
@@ -1,201 +0,0 @@
-#
-# Makefile for ld version 2
-#
-# $Id$
-#
-srcdir=../common
-VPATH=../common
-BASEDIR        = ../..
-HOSTDIR = ../$(HOST)/
-INCLUDE        = $(srcdir)/$(BASEDIR)/include-cygnus
-INCLUDES = -I. -I$(srcdir)  -I$(INCLUDE) 
-DEBUG  = -g
-
-
-#__sun3__#EXTRA_DEF=-DHOST_SYS=SUN3_SYS
-#__sun4__#EXTRA_DEF=-DHOST_SYS=SUN4_SYS
-#__dgux__#EXTRA_DEF=-DHOST_SYS=DGUX_SYS
-
-CFLAGS = $(INCLUDES) $(EXTRA_DEF) $(DEBUG)
-LINTFLAGS =  $(INCLUDES) $(EXTRA_DEF) 
-
-.SUFFIXES: .y
-
-.y.o:
-       yacc -tvd $<
-       mv y.tab.c ldgram.tab.c
-       $(CC) -c $(CFLAGS) ldgram.tab.c
-       mv ldgram.tab.o ldgram.o
-
-
-# go directly to ld.new in case this ld isn't capable of
-# linking native object on this host.  It can be renamed on
-# install.
-PROGS  = $(HOSTDIR)/ld.new
-
-# for self hosting
-GNUTARGET=a.out-generic-big
-LDEMULATION=gld
-BFDLIB=$(srcdir)/$(BASEDIR)/bfd/$(HOST)/libbfd.a
-
-OBJS= ldgram.o ldlex.o ldlang.o ldmain.o ldwrite.o ldexp.o ld-lnk960.o ld-gld68k.o \
-       ld-gld.o ld-gld960.o ld-emul.o ldversion.o ldmisc.o ldsym.o ldfile.o
-
-HEADERS=config.h ldmain.h ldmain.h ldmisc.h ldsym.h ldlang.h ldexp.h \
-       ldlex.h ldwrite.h ldversion.h ld-emul.h ldfile.h ldgram.h ld.h
-
-MANSOURCES=ld.tex
-
-LDCSOURCES=ldlang.c ldmain.c ldwrite.c ld-lnk960.c ld-gld.c ld-gld68k.c \
-       ld-gld960.c ld-emul.c ldversion.c ldmisc.c ldexp.c ldsym.c ldfile.c
-
-GENERATED_SOURCES=ldgram.tab.c ldlex.c ldgram.tab.h y.tab.h
-GENERATED_HEADERS=ldgram.tab.h
-
-LDSOURCES=$(LDCSOURCES) ldgram.y ldlex.l
-
-BFDSOURCES=../../bfd/common/*.c
-
-SOURCES= $(LDSOURCES) $(BFDSOURCES)
-LINTSOURCES=   $(LDCSOURCES) $(BFDSOURCES) $(GENERATED_SOURCES)
-
-all: Makefile $(PROGS) 
-
-
-
-$(BFDLIB): $(BFDSOURCES)
-       (cd ../bfd; make)
-
-$(PROGS): $(OBJS) $(BFDLIB)
-#      (cd ../bfd; make)
-#      LDEMULATION=gld; export LDEMULATION;  GNUTARGET=a.out-generic-big;./ldok -format a.out-generic-big  -o ld /lib/crt0.o   $(OBJS) $(BFDLIB) -lc /usr/local/lib/gcc/sparc/1.91/gnulib
-#      gld -o ld /lib/crt0.o   $(OBJS) $(BFDLIB) -lc /usr/local/lib/gcc/sparc/1.91/gnulib
-       $(CC) -Bstatic -o ld.new $(OBJS) $(BFDLIB)
-
-
-ld1: ld
-       gcc -v  -B./ -o ld1  $(OBJS) $(BFDLIB)
-
-ld2: ld1
-       mv ld1 ld
-       gcc -v  -B./ -o ld2  $(OBJS) $(BFDLIB)
-
-ld3: ld2
-       mv ld2 ld
-       gcc -v  -B./ -o ld3  $(OBJS) $(BFDLIB)
-
-ld.dvi:ld.tex
-       tex ld.tex
-
-ldgram.o: ldgram.y
-ldgram.tab.h:ldgram.y
-       cp y.tab.h ldgram.tab.h
-       
-ldlex.c: ldlex.l ldgram.tab.h
-ldlex.o: ldlex.c ldgram.tab.h
-
-ldmain.o: ldmain.c
-ldversion.o: ldversion.c
-ldfile.o: ldfile.c
-ldwrite.o: ldwrite.c
-ldlang.o: ldlang.c ldgram.tab.h
-ld-gld.o: ld-gld.c
-ld-gld68k.o: ld-gld68k.c
-ld-gld960.o: ld-gld960.c
-ld-emul.o: ld-emul.c
-ld-lnk960.o: ld-lnk960.c
-ldexp.o: ldexp.c ldgram.tab.h
-ldmisc.o: ldmisc.c 
-ldsym.o: ldsym.c 
-
-clean:
-       - rm -f $(OBJS) $(GENERATED_SOURCES) $(GENERATED_HEADERS)
-       - rm -f ld ld1 ld2 ld3 ld.new
-
-
-lintlog:$(SOURCES) Makefile
-       $(LINT) -abhxzn  $(LINTFLAGS)  $(LINTSOURCES) \
-| grep -v "pointer casts may be troublesome" \
-| grep -v "possible pointer alignment problem" \
-| grep -v "ignore" \
-| grep -v "conversion from long may lose accuracy" \
-| grep -v "warning: constant argument to NOT" \
-| grep -v "enumeration type clash, operator CAST" \
-| grep -v "warning: constant in conditional context"\
-| grep -v "archive\.c"
-
-
-tags TAGS:$(SOURCES) $(HEADERS)
-       etags -t $(SOURCES) $(HEADERS)
-
-release:
-       (cd /4/steve/ld; tar cf -  $(LDSOURCES) $(HEADERS) $(MANSOURCES)) | tar xf - 
-
-objdump:objdump.c 
-
-install: $(PROGS)
-       rm -f $G960BASE/bin/$(PROGS)
-       cp $(PROGS) $$G960BASE/bin/gld960c
-
-#-----------------------------------------------------------------------------
-#              'STANDARD' GNU/960 TARGETS BELOW THIS POINT
-#
-# 'VERSION' file must be present and contain a string of the form "x.y"
-#-----------------------------------------------------------------------------
-
-ver960.c: FORCE
-       rm -f ver960.c
-       echo "char ${TARG}_ver[]= \"${TARG} `cat VERSION`, `date`\";" > ver960.c
-
-
-# This target should be invoked before building a new release.
-# 'VERSION' file must be present and contain a string of the form "x.y"
-#
-roll:
-       @V=`cat VERSION`                ; \
-       MAJ=`sed 's/\..*//' VERSION`    ; \
-       MIN=`sed 's/.*\.//' VERSION`    ; \
-       V=$$MAJ.`expr $$MIN + 1`        ; \
-       rm -f VERSION                   ; \
-       echo $$V >VERSION               ; \
-       echo Version $$V
-
-# Dummy target to force execution of dependent targets.
-#
-.force:
-FORCE:
-
-# Target to uncomment host-specific lines in this makefile.  Such lines must
-# have the following string beginning in column 1: #__<hostname>__#
-# Original Makefile is backed up as 'Makefile.old'.
-#
-# Invoke with:  make make HOST=xxx
-#
-make:
-       -@if test $(HOST)x = x ; then \
-               echo '\aSpecify "make make HOST=???"'; \
-               exit 1; \
-       fi ; \
-       grep -s "^#The next line was generated by 'make make'" Makefile; \
-       if test $$? = 0 ; then  \
-               echo "\aMakefile has already been processed with 'make make'";\
-               exit 1; \
-       fi ; \
-       mv -f Makefile Makefile.old; \
-       echo "#The next line was generated by 'make make'"       >Makefile ; \
-       echo "HOST=$(HOST)"                                     >>Makefile ; \
-       echo                                                    >>Makefile ; \
-       sed "s/^#__$(HOST)__#//" < Makefile.old                 >>Makefile
-
-#\f
-
-Makefile: ../common/Makefile
-       mv Makefile Makefile.backup
-       cp ../common/Makefile .
-       $(MAKE) "HOST=$(HOST)" make
-
-### Local Variables: ***
-### mode:fundamental ***
-### page-delimiter: "^#\f" ***
-### End: ***
-### end of file
diff --git a/ld/PORTING b/ld/PORTING
deleted file mode 100644 (file)
index 8f4125c..0000000
+++ /dev/null
@@ -1,152 +0,0 @@
-       Preliminary Notes on Porting GNU ld
-       -----------------------------------
-
-Before porting ld itself, you will need to port the BFD library;
-see ../bfd/PORTING.
-
-The 'host' is the system a tool runs *on*.
-The 'target' is the system a tool runs *for*, i.e.
-a tool can read/write the binaries of the target.
-Most often, host==target, but ld supports cross-linking
-(and to some extent the same ld binary can be used a linker
-for multiple target rachitectures).
-
-Porting to a new host
----------------------
-Pick a name for your host. Call that <host>.
-You need to create the file config/mh-<host>.
-
-Porting to a new target
------------------------
-Pick a name for your target. Call that <target>.
-You need to create at least config/mt-<target>.
-It should contain
-       EMUL=<emulation>
-An <emulation> controls the "personality" of ld,
-such as the default linker script.  Usually, the
-<emulation> will have teh same name as the <target>,
-and you will need to create a new <emulation> (see below).
-
-You will also need to edit Makefile.in and possible configure.in.
-To see how to do that, search for existing examples (e.g. sun3,
-sun4, hp300bsd).
-
-Porting to a new emulation target
----------------------------------
-Pick a name for your target. Call that <emulation>.
-Usually, <emulation> and <target> are the same.
-You need to create at least <emulation>.sh.
-You will also need to edit Makefile.in,
-To see how to do that, search for existing examples.
-
-The file <emulation>.sh defines a set of parameter that
-are used to generate the emulation.  Its syntax is that
-of a (Bourne) shell script, and it is "sourced" by genscripts.sh.
-
-Writing <emulation.sh>
-----------------------
-
-Usually, <emulation>.sh contains:
-       EMULATION_NAME=<emulation>
-       SCRIPT_NAME=<script>
-       OUTPUT_FORMAT="<target-name>"
-       TEXT_START_ADDR=<text_start_addr>
-       PAGE_SIZE=<page_size>
-       SEGMENT_SIZE=<segment_size>  # If different from PAGE_SIZE.
-       ARCH=<arch>
-
-<target-name>
-       Matches the 'filename' field of the bfd_target you want
-       to use.  (This is a string, and currently the first field.)
-       For an a.out target, <target-name> matches the TARGETNAME
-       defined in ../bfd/<target>.c.
-
-<arch>
-       The architecture: e.g. m68k, sparc, ...
-
-<script>
-       The file <script>.sc-sh is a shell script which when
-       eveluated (by genscripts.sh) writes a linker script
-       file to standard output.  You may need to write a new
-       script.  If you use the a.out format or something
-       similar, you can probably set
-               SCRIPT_NAME=aout
-
-<text_start_addr>
-<page_size>
-<segment_size>
-       These set the shell variables TEXT_START_ADDR, PAGE_SIZE,
-       and SEGEMNT_SIZE for use by <script>.sc-sh.
-       If your script doesn't use these variables, you
-       don't have to define the variables,
-       For emulations using a.out files, you can get these
-       values from ../bfd/<target>c.
-
-In some cases, you may need more more definitions.
-For example, if you can't use generic.em,
-you may need to add:
-       TEMPLATE_NAME=<emulation>
-and write your own <emulation>.em file.
-
-Writing a new <script>.sc-sh
-----------------------------
-
-You may need to write a new script file for your emulation.
-
-Your script can use the shell variable LD_FLAG, which has the value:
-LD_FLAG=       when building a script to be used by default
-LD_FLAG=n      when building a script to be used for ld -n
-LD_FLAG=N      when building a script to be used for ld -N
-LD_FLAG=r      when building a script to be used for ld -r
-LD_FLAG=u      when building a script to be used for ld -Ur
-
-The variable RELOCATING is only set if relocation is happening
-(i.e. unless the linker is invoked with -r).
-Thus your script should has an action ACTION
-that should only be done when relocating,
-express that as:
-       ${RELOCATING+ ACTION}
-In general, this is the case for most assignments, which should look like:
-       ${RELOCATING+ _end = .}
-
-Also, you should assign absolute addresses to sections only
-when relocating, so:
-         .text ${RELOCATING+ ${TEXT_START_ADDR}}:
-
-The forms:
-        .section { ... } > section
-should be:
-        .section { ... } > ${RELOCATING+ section}
-
-RELOCATING is set except when LD_FLAG=r or LD_FLAG=u.
-CONSTRUCTING is set except when LD_FLAG=u.
-
-Alignment of the data segments is controlled by the variables
-DATA_ALIGNMENT_ (note trailing underscore), DATA_ALIGNMENT_n,
-DATA_ALIGNMENT_N, DATA_ALIGNMENT_r, or DTA_ALIGNMENT_u
-depending on LD_FLAGS's value.
-Normally, the default value works (this is "ALIGN(${SEGMENT_SIZE})"
-for the _n, and __ (default) variants; "." for the _N, variant;
-and "" for the _r and _u variants).
-
-Handling -n and -N style binaries in your linker script
--------------------------------------------------------
-
-The -n linker flag requests the linker to create a binary
-with a write-protected text segment, but not demand-pagable (NMAGIC).
-Sunos starts the text segment for demand-paged binaries at 0x2020
-and other binaries at 0x2000, since the exec header (0x20 bytes)
-is paged in with the text.  Some other Unix variants do the same.
-
-In that case, the <emulation.sh> should define:
-
-NONPAGED_TEXT_START_ADDR
-       The text start address to use when linking with -n or -N flags.
-
-For example, on a sun4:
-       TEXT_START_ADDR=0x2020
-       NONPAGED_TEXT_START_ADDR=0x2000
-
-The -N linker flag requests the linker to create a binary
-without a write-protected text segment (NMAGIC).
-This is like -n, except that the data segment needs not be page-aligned.
diff --git a/ld/config.sub b/ld/config.sub
deleted file mode 100755 (executable)
index dac9ab8..0000000
+++ /dev/null
@@ -1,446 +0,0 @@
-#!/bin/sh
-
-# Configuration subroutine to validate and canonicalize a configuration type.
-# Supply the specified configuration type as an argument.
-# If it is invalid, we print an error message on stderr and exit with code 1.
-# Otherwise, we print the canonical config type on stdout and succeed.
-
-# This file is supposed to be the same for all GNU packages
-# and recognize all the CPU types, system types and aliases
-# that are meaningful with *any* GNU software.
-# Each package is responsible for reporting which valid configurations
-# it does not support.  The user should be able to distinguish
-# a failure to support a valid configuration from a meaningless
-# configuration (e.g. a typo).
-
-# Please email any bugs, comments, and/or additions to this file to:
-# configure@cygnus.com
-
-# decode aliases into canonical names
-
-case "$1" in
-# cpu alone is a valid alias for cpu-none-none.
-vax | tahoe | i386 | i860 | m68k | m68000 | m88k | sparc | ns32k \
-       | alliant | arm | c1 | c2 | mips | pyramid | tron | a29k \
-       | romp | rs6000 | i960 | h8300)
-       cpu=$1
-       vendor=none
-       os=none
-       ;;
-altos | altos3068)
-       cpu=m68k
-       vendor=altos
-       os=sysv # maybe?
-       ;;
-altosgas)
-       cpu=m68k
-       vendor=altos
-       os=gas
-       ;;
-am29k)
-       cpu=a29k
-       vendor=none
-       os=bsd
-       ;;
-amdahl)
-       cpu=580
-       vendor=amdahl
-       os=uts
-       ;;
-amigados)
-       cpu=m68k
-       vendor=cbm
-       os=amigados # Native AmigaDOS
-       ;;
-amigaunix | amix)
-       cpu=m68k
-       vendor=cbm
-       os=svr4 # System V Release 4 (svr4 is an industry recognized acronym)
-       ;;
-apollo68)
-       cpu=m68k
-       vendor=apollo
-       os=sysv # maybe?
-       ;;
-balance)
-       cpu=ns32k
-       vendor=sequent
-       os=dynix
-       ;;
-convex-c1)
-       cpu=c1
-       vendor=convex
-       os=sysv # maybe?
-       ;;
-convex-c2)
-       cpu=c2
-       vendor=convex
-       os=sysv # maybe?
-       ;;
-cray | ymp)
-       cpu=ymp
-       vendor=cray
-       os=unicos
-       ;;
-cray2)
-       cpu=cray2
-       vendor=cray
-       os=unicos
-       ;;
-dec3100 | decstatn | decstation | decstation-3100 | pmax | pmin)
-       cpu=mips
-       vendor=dec
-       os=ultrix
-       ;;
-delta | 3300 | motorola-3300 | motorola-delta \
-      | 3300-motorola | delta-motorola)
-       cpu=m68k
-       vendor=motorola
-       os=sysv # maybe?
-       ;;
-
-delta88)
-       cpu=m88k
-       vendor=motorola
-       os=m88kbcs
-       ;;
-
-gmicro)
-       cpu=tron
-       vendor=gmicro
-       os=sysv # maybe?
-       ;;
-
-h8300hds)
-       cpu=h8300
-       vendor=hitachi
-       os=hds
-       ;;
-
-# start-sanitize-v9
-hal-32 | hal32)
-       cpu=sparc64
-       vendor=hal
-       os=hal32
-       ;;
-hal-64 | hal64)
-       cpu=sparc64
-       vendor=hal
-       os=hal64
-       ;;
-sparc64)
-       cpu=sparc64
-       vendor=sun
-       os=v9
-       ;;
-sparc64-v7 | sparc64v7)
-       cpu=sparc64
-       vendor=sun
-       os=v7
-       ;;
-# end-sanitize-v9
-hp300bsd)
-       cpu=m68k
-       vendor=hp
-       os=bsd
-       ;;
-hp300hpux | hpux | hp9k3[2-9][0-9])
-       cpu=m68k
-       vendor=hp
-       os=hpux
-       ;;
-hp9k31[0-9] | hp9k2[0-9][0-9])
-       cpu=m68000
-       vendor=hp
-       os=hpux
-       ;;
-i386sco)
-       cpu=i386
-       vendor=sco
-       os=sysv # maybe?
-       ;;
-i386v)
-       cpu=i386
-       vendor=none
-       os=sysv
-       ;;
-i386v32)
-       cpu=i386
-       vendor=none
-       os=sysv32
-       ;;
-iris | iris4d)
-       cpu=mips
-       vendor=sgi
-       os=irix # maybe?
-       ;;
-
-dpx2)
-       vendor=bull
-       cpu=m68k
-       os=sysv
-       ;;
-isi | isi68)
-       cpu=m68k
-       vendor=isi
-       os=sysv # maybe?
-       ;;
-littlemips)
-       cpu=mips
-       vendor=little
-       os=bsd
-       ;;
-magnum | m3230)
-       cpu=mips
-       vendor=mips
-       os=sysv # maybe?
-       ;;
-merlin)
-       cpu=ns32k
-       vendor=utek
-       os=sysv # maybe?
-       ;;
-miniframe)
-       cpu=m68000
-       vendor=convergent
-       os=sysv # maybe?
-       ;;
-mmax)
-       cpu=ns32k
-       vendor=encore
-       os=sysv # maybe?
-       ;;
-news | news700 | news800 | news900)
-       cpu=m68k
-       vendor=sony
-       os=newsos3 # Based on bsd-4.3
-       ;;
-news1000)
-       cpu=m68030
-       vendor=sony
-       os=newsos3 # ?
-       ;;
-news-3600 | bigmips | risc-news)
-       cpu=mips
-       vendor=sony
-       os=newsos4 # Presumably?
-       ;;
-next)
-       cpu=m68k
-       vendor=next
-       os=sysv # maybe?
-       ;;
-nindy960)
-       cpu=i960
-       vendor=intel
-       os=nindy
-       ;;
-none)
-       cpu=none
-       vendor=none
-       os=none
-       ;;
-np1)
-       cpu=np1
-       vendor=gould
-       os=sysv # maybe?
-       ;;
-rtpc)
-       cpu=romp
-       vendor=ibm
-       os=aix # maybe?
-       ;;      
-pbd)
-       cpu=sparc
-       vendor=unicom
-       os=sysv
-       ;;
-pn)
-       cpu=pn
-       vendor=gould
-       os=sysv # maybe?
-       ;;
-ps2)
-       cpu=i386
-       vendor=ibm
-       os=sysv # maybe?
-       ;;
-sun2)
-       cpu=m68000
-       vendor=sun
-       os=sunos4
-       ;;
-sun2os3)
-       cpu=m68000
-       vendor=sun
-       os=sunos3
-       ;;
-sun2os4)
-       cpu=m68000
-       vendor=sun
-       os=sunos4
-       ;;
-sun3)
-       cpu=m68k
-       vendor=sun
-       os=sunos4
-       ;;
-sun3os3)
-       cpu=m68k
-       vendor=sun
-       os=sunos3
-       ;;
-sun3os4)
-       cpu=m68k
-       vendor=sun
-       os=sunos4
-       ;;
-sun386 | roadrunner | sun386i)
-       cpu=i386
-       vendor=sun
-       os=sunos
-       ;;
-sun4)
-       cpu=sparc
-       vendor=sun
-       os=sunos4
-       ;;
-sun4os3)
-       cpu=sparc
-       vendor=sun
-       os=sunos3
-       ;;
-sun4os4)
-       cpu=sparc
-       vendor=sun
-       os=sunos4
-       ;;
-symmetry)
-       cpu=i386
-       vendor=sequent
-       os=dynix
-       ;;
-tower | tower-32)
-       cpu=m68k
-       vendor=ncr
-       os=sysv # maybe?
-       ;;
-ultra3)
-       cpu=a29k
-       vendor=nyu
-       os=sym1
-       ;;
-umax)
-       cpu=ns32k
-       vendor=encore
-       os=sysv # maybe?
-       ;;
-unixpc | safari | pc7300 | 3b1 | 7300 | 7300-att | att-7300)
-       cpu=m68k
-       vendor=att
-       os=sysv # maybe?
-       ;;
-vax-dec)
-       cpu=vax
-       vendor=dec
-       os=ultrix # maybe?
-       ;;
-vxworks68)
-       cpu=m68k
-       vendor=wrs
-       os=vxworks
-       ;;
-vxworks960)
-       cpu=i960
-       vendor=wrs
-       os=vxworks
-       ;;
-xmp)
-       cpu=xmp
-       vendor=cray
-       os=unicos
-       ;;
-# not an alias.  parse what we expect to be a canonical name.
-*)
-       cpu=`echo $1 | sed 's/-.*$//'`
-
-       if [ "${cpu}" = "$1" ] ; then
-               # no vendor so this is an invalid name.
-               echo '***' No vendor: configuration \`$1\' not recognized 1>&2
-               exit 1
-       else
-               # parse out vendor
-               rest=`echo $1 | sed "s/${cpu}-//"`
-               vendor=`echo ${rest} | sed 's/-.*$//'`
-
-               if [ "${vendor}" = "${rest}" ] ; then
-                       # a missing os is acceptable
-                       os=none
-               else
-                       os=`echo ${rest} | sed "s/${vendor}-//"`
-               fi
-       fi
-       ;;
-esac
-
-# At this point we should have three parts of a canonical name in cpu,
-# vendor, and os.
-
-# verify that the cpu is known.
-
-case "${cpu}" in
-none | vax | tahoe | i386 | i860 | m68k | m68000 | m88k | sparc \
-       | ns32k | alliant | arm | c1 | c2 | mips | pyramid | tron \
-       | a29k | romp | rs6000 | i960 | xmp | ymp | cray2 | 580 | h8300)
-       ;;
-
-# start-sanitize-v9
-sparc64) ;;
-# end-sanitize-v9
-
-*)
-       echo '***' Invalid cpu \`${cpu}\': configuration \`$1\' not recognized 1>&2
-       exit 1
-       ;;
-esac
-
-# verify that the vendor is known.
-
-case "${vendor}" in
-       altos | amdahl | aout | apollo | att | bcs | bout |\
-       cbm | convergent | convex | coff | cray | dec | encore |\
-       gould | hitachi | intel | isi | hp | ibm | little | mips | motorola |\
-       ncr | next | none | nyu | sco | sequent | sgi | sony | sun |\
-       unicom | utek | wrs | bull ) ;; 
-
-# start-sanitize-v9
-hal) ;;
-# end-sanitize-v9
-
-*)
-       echo '***' Invalid vendor \`${vendor}\': configuration \`$1\' not recognized 1>&2
-       exit 1
-       ;;
-esac
-
-# verify that the os is known, if it exists.
-
-case "${os}" in
-aix* | aout | bout | bsd* | coff | ctix* | dynix* | esix* | hpux* \
-       | hds | irix* | isc* | kern | mach* | newsos* | nindy* | none \
-       | osf* | sco* | sunos* | sysv* | ultrix* | unos* | v88r* \
-       | vms* | vxworks* | sym[1-9]* | unicos* | uts | svr4 \
-       | amigados) 
-       ;;
-
-# start-sanitize-v9
-hal32 | hal64 | v7 | v9) ;;
-# end-sanitize-v9
-
-*)
-       echo '***' Invalid os \`${os}\': configuration \`$1\' not recognized 1>&2
-       exit 1
-       ;;
-esac
-
-echo ${cpu}-${vendor}-${os}
diff --git a/ld/config/OSE68.mt b/ld/config/OSE68.mt
deleted file mode 100755 (executable)
index 6d50298..0000000
+++ /dev/null
@@ -1 +0,0 @@
-EMUL=sun3
diff --git a/ld/config/decstation.mh b/ld/config/decstation.mh
deleted file mode 100755 (executable)
index 8b2da6f..0000000
+++ /dev/null
@@ -1 +0,0 @@
-YACC=yacc -vd
diff --git a/ld/config/h-i386v b/ld/config/h-i386v
deleted file mode 100755 (executable)
index 35d9e95..0000000
+++ /dev/null
@@ -1,3 +0,0 @@
-# $Id$
-
-HDEFINES=-DHOST_SYS=i386_SYSV_SYS
diff --git a/ld/config/h-m68kv b/ld/config/h-m68kv
deleted file mode 100755 (executable)
index b71c6d6..0000000
+++ /dev/null
@@ -1,3 +0,0 @@
-# $Id$
-
-HDEFINES=-DHOST_SYS=M68K_SYSV_SYS
diff --git a/ld/config/hmake-dec3100 b/ld/config/hmake-dec3100
deleted file mode 100755 (executable)
index 4a17e63..0000000
+++ /dev/null
@@ -1,2 +0,0 @@
-HDEFINES=-DHOST_SYS=DEC3100_SYS
-YACC=yacc -vd
diff --git a/ld/config/hmake-dgux b/ld/config/hmake-dgux
deleted file mode 100755 (executable)
index 9c4e9bc..0000000
+++ /dev/null
@@ -1,9 +0,0 @@
-HDEFINES = -DHOST_SYS=DGUX_SYS -D__using_DGUX
-
-CC = gcc -Wall -ansi
-YACC=yacc -tvd
-
-HOSTING_CRT0=/lib/crt0.o -X
-HOSTING_LIBS=/usr/sde/m88kbcs/lib/libc.a
-HOSTING_EMU=LDEMULATION=gldm88kbcs; export LDEMULATION
-
diff --git a/ld/config/hmake-rtbsd b/ld/config/hmake-rtbsd
deleted file mode 100755 (executable)
index 7d2ff5a..0000000
+++ /dev/null
@@ -1,7 +0,0 @@
-# The IBM RT/PC has only been supported as a host in a cross-development
-# environment.  If you don't have gcc, I was able to get 'hc -Hnocpp -ma'
-# to compile most of the modules, but didn't try running anything.
-YACC = yacc -d
-HDEFINES = -DHOST_SYS=RTBSD_SYS  -DNO_VARARGS
-LDFLAGS = 
-CC=gcc         # hc/pcc just can't cut it
diff --git a/ld/config/hmake-sun3 b/ld/config/hmake-sun3
deleted file mode 100755 (executable)
index 5922ac1..0000000
+++ /dev/null
@@ -1,9 +0,0 @@
-CDEFINES=-DHOST_SYS=SUN3_SYS
-#CC=gcc -ansi -Wall
-CC=cc
-YACC=yacc -d
-
-
-HOSTING_CRT0=/usr/lib/crt0.o /usr/lib/Fcrt1.o -L/usr/lib/fsoft.o
-HOSTING_LIBS=-lc
-HOSTING_EMU=LDEMULATION=gld68k; export LDEMULATION
diff --git a/ld/config/hmake-sun4 b/ld/config/hmake-sun4
deleted file mode 100755 (executable)
index b53bfde..0000000
+++ /dev/null
@@ -1,8 +0,0 @@
-HDEFINES=-DHOST_SYS=SUN4_SYS  
-YACC=yacc -tvd
-#CC=gcc -Wall -ansi
-#stuff for self hosting
-HOSTING_CRT0=/lib/crt0.o
-HOSTING_LIBS=/limbo/latest/=sun4/lib/gcc/sparc/1.93/gnulib  -lc
-HOSTING_EMU=LDEMULATION=gld; export LDEMULATION
-
diff --git a/ld/config/hmake-sun4-64 b/ld/config/hmake-sun4-64
deleted file mode 100755 (executable)
index 92f74ad..0000000
+++ /dev/null
@@ -1,8 +0,0 @@
-HDEFINES=-DHOST_SYS=SUN4_SYS  -DHOST_64_BIT="long long"
-YACC=yacc -tvd
-CC=/usr/latest/bin/gcc -Wall -ansi
-#stuff for self hosting
-HOSTING_CRT0=/lib/crt0.o
-HOSTING_LIBS=/limbo/latest/=sun4/lib/gcc/sparc/1.93/gnulib  -lc
-HOSTING_EMU=LDEMULATION=gld; export LDEMULATION
-
diff --git a/ld/config/hp300bsd.mh b/ld/config/hp300bsd.mh
deleted file mode 100755 (executable)
index 496728b..0000000
+++ /dev/null
@@ -1,8 +0,0 @@
-#CC=gcc -ansi -Wall
-CC=cc
-YACC=yacc -d
-
-
-HOSTING_CRT0=/lib/crt0.o
-HOSTING_LIBS=-lc
-HOSTING_EMU=LDEMULATION=hp300bsd; export LDEMULATION
diff --git a/ld/config/hp9000.mh b/ld/config/hp9000.mh
deleted file mode 100644 (file)
index 529ea8e..0000000
+++ /dev/null
@@ -1,4 +0,0 @@
-# If compiling with -O on the HP 9000/300 running HP/UX, you must
-# specify -Wp,-P to avoid a stupid compiler bug.
-# Ian Taylor, David Henkel-Wallace, Cygnus Support
-# CFLAGS = +O1000 -Wp,-P
diff --git a/ld/config/news.mh b/ld/config/news.mh
deleted file mode 100755 (executable)
index 085fb13..0000000
+++ /dev/null
@@ -1,8 +0,0 @@
-#CC=gcc -ansi -Wall
-CC=cc
-YACC=yacc -d
-
-
-HOSTING_CRT0=/lib/crt0.o
-HOSTING_LIBS=-lc
-HOSTING_EMU=LDEMULATION=news; export LDEMULATION
diff --git a/ld/config/sparc.mh b/ld/config/sparc.mh
deleted file mode 100755 (executable)
index 3cf3518..0000000
+++ /dev/null
@@ -1,7 +0,0 @@
-YACC=yacc -tvd
-#CC=gcc -Wall -ansi
-#stuff for self hosting
-HOSTING_CRT0=/lib/crt0.o
-HOSTING_LIBS=`if [ -f ../gcc/libgcc.a ] ; then echo ../gcc/libgcc.a ; else echo $(libdir)/libgcc.a; fi`  -lc
-HOSTING_EMU=LDEMULATION=sun4; export LDEMULATION
-
diff --git a/ld/config/tmake-coff-a29k b/ld/config/tmake-coff-a29k
deleted file mode 100755 (executable)
index 5c55415..0000000
+++ /dev/null
@@ -1 +0,0 @@
-TDEFINES = -DDEFAULT_EMULATION=GLD29K_EMULATION_NAME
diff --git a/ld/config/tmake-m88k-bcs b/ld/config/tmake-m88k-bcs
deleted file mode 100755 (executable)
index 94e8c66..0000000
+++ /dev/null
@@ -1 +0,0 @@
-TDEFINES = -DDEFAULT_EMULATION=GLDM88KBCS_EMULATION_NAME
diff --git a/ld/config/tmake-sun4 b/ld/config/tmake-sun4
deleted file mode 100755 (executable)
index d68947e..0000000
+++ /dev/null
@@ -1 +0,0 @@
-TDEFINES = -DDEFAULT_EMULATION=GLD_EMULATION_NAME
diff --git a/ld/configdos.bat b/ld/configdos.bat
deleted file mode 100755 (executable)
index 2702dd0..0000000
+++ /dev/null
@@ -1,6 +0,0 @@
-@echo off
-@echo Configuring binutils for H8/300, hosted on MS-DOS
-
-copy ..\bfd\hosts\h-go32.h sysdep.h
-
-copy makefile.dos makefile
diff --git a/ld/cplus-dem.c b/ld/cplus-dem.c
deleted file mode 100644 (file)
index f4d1d84..0000000
+++ /dev/null
@@ -1,1370 +0,0 @@
-/* Demangler for GNU C++ 
-   Copyright 1989, 1991 Free Software Foundation, Inc.
-   written by James Clark (jjc@jclark.uucp)
-   
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
-   any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software
-   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-/* This is for g++ 1.95.03 (November 13 verison).  */
-
-/* This file exports one function
-
-   char *cplus_demangle (const char *name, int mode)
-
-   If NAME is a mangled function name produced by GNU C++, then
-   a pointer to a malloced string giving a C++ representation
-   of the name will be returned; otherwise NULL will be returned.
-   It is the caller's responsibility to free the string which
-   is returned.
-
-   If MODE > 0, then ANSI qualifiers such as `const' and `void' are output.
-   Otherwise they are not.
-   If MODE >= 0, parameters are emitted; otherwise not.
-
-   For example,
-   
-   cplus_demangle ("foo__1Ai",  0)     => "A::foo(int)"
-   cplus_demangle ("foo__1Ai",  1)     => "A::foo(int)"
-   cplus_demangle ("foo__1Ai", -1)     => "A::foo"
-
-   cplus_demangle ("foo__1Afe",  0)    => "A::foo(float,...)"
-   cplus_demangle ("foo__1Afe",  1)    => "A::foo(float,...)"
-   cplus_demangle ("foo__1Afe", -1)    => "A::foo"
-
-   This file imports xmalloc and xrealloc, which are like malloc and
-   realloc except that they generate a fatal error if there is no
-   available memory. */
-
-/* define this if names don't start with _ */
-/* #define nounderscore 1 */
-#include <ansidecl.h>
-#include <sysdep.h>
-
-#define xmalloc ldmalloc
-#define xrealloc ldrealloc
-
-#if 0
-/* GDB-specific, FIXME.  */
-#include "defs.h"
-#endif
-
-#ifdef PARAMS
-#undef PARAMS
-#endif
-#define PARAMS(x)  EXFUN(,x)
-
-/* This is '$' on systems where the assembler can deal with that.
-   Where the assembler can't, it's '.' (but on many systems '.' is
-   used for other things).  */
-#if !defined (CPLUS_MARKER)
-#define CPLUS_MARKER '$'
-#endif
-
-#ifndef __STDC__
-#define const
-#endif
-
-#ifdef __STDC__
-extern char *cplus_demangle (const char *type, int mode);
-#else
-extern char *cplus_demangle ();
-#endif
-
-
-static char **typevec = 0;
-static int ntypes = 0;
-static int typevec_size = 0;
-
-const static struct optable {
-  const char *in;
-  const char *out;
-  int ansi;
-} optable[] = {
-  "nw", " new",        1,              /* new (1.92, ansi) */
-  "dl", " delete", 1,          /* new (1.92, ansi) */
-  "new", " new", 0,            /* old (1.91, and 1.x) */
-  "delete", " delete", 0,      /* old (1.91, and 1.x) */
-  "as", "=", 1,                        /* ansi */
-  "ne", "!=", 1,               /* old, ansi */
-  "eq", "==", 1,               /* old, ansi */
-  "ge", ">=", 1,               /* old, ansi */
-  "gt", ">", 1,                        /* old, ansi */
-  "le", "<=", 1,               /* old, ansi */
-  "lt", "<", 1,                        /* old, ansi */
-  "plus", "+", 0,              /* old */
-  "pl", "+", 1,                        /* ansi */
-  "apl", "+=", 1,              /* ansi */
-  "minus", "-", 0,             /* old */
-  "mi", "-", 1,                        /* ansi */
-  "ami", "-=", 1,              /* ansi */
-  "mult", "*", 0,              /* old */
-  "ml", "*", 1,                        /* ansi */
-  "aml", "*=", 1,              /* ansi */
-  "convert", "+", 0,           /* old (unary +) */
-  "negate", "-", 0,            /* old (unary -) */
-  "trunc_mod", "%", 0,         /* old */
-  "md", "%", 1,                        /* ansi */
-  "amd", "%=", 1,              /* ansi */
-  "trunc_div", "/", 0,         /* old */
-  "dv", "/", 1,                        /* ansi */
-  "adv", "/=", 1,              /* ansi */
-  "truth_andif", "&&", 0,      /* old */
-  "aa", "&&", 1,               /* ansi */
-  "truth_orif", "||", 0,       /* old */
-  "oo", "||", 1,               /* ansi */
-  "truth_not", "!", 0,         /* old */
-  "nt", "!", 1,                        /* ansi */
-  "postincrement", "++", 0,    /* old */
-  "pp", "++", 1,               /* ansi */
-  "postdecrement", "--", 0,    /* old */
-  "mm", "--", 1,               /* ansi */
-  "bit_ior", "|", 0,           /* old */
-  "or", "|", 1,                        /* ansi */
-  "aor", "|=", 1,              /* ansi */
-  "bit_xor", "^", 0,           /* old */
-  "er", "^", 1,                        /* ansi */
-  "aer", "^=", 1,              /* ansi */
-  "bit_and", "&", 0,           /* old */
-  "ad", "&", 1,                        /* ansi */
-  "aad", "&=", 1,              /* ansi */
-  "bit_not", "~", 0,           /* old */
-  "co", "~", 1,                        /* ansi */
-  "call", "()", 0,             /* old */
-  "cl", "()", 1,               /* ansi */
-  "alshift", "<<", 0,          /* old */
-  "ls", "<<", 1,               /* ansi */
-  "als", "<<=", 1,             /* ansi */
-  "arshift", ">>", 0,          /* old */
-  "rs", ">>", 1,               /* ansi */
-  "ars", ">>=", 1,             /* ansi */
-  "component", "->", 0,                /* old */
-  "rf", "->", 1,               /* ansi */
-  "indirect", "*", 0,          /* old */
-  "method_call", "->()", 0,    /* old */
-  "addr", "&", 0,              /* old (unary &) */
-  "array", "[]", 0,            /* old */
-  "vc", "[]", 1,               /* ansi */
-  "compound", ",", 0,          /* old */
-  "cm", ",", 1,                        /* ansi */
-  "cond", "?:", 0,             /* old */
-  "cn", "?:", 1,               /* psuedo-ansi */
-  "max", ">?", 0,              /* old */
-  "mx", ">?", 1,               /* psuedo-ansi */
-  "min", "<?", 0,              /* old */
-  "mn", "<?", 1,               /* psuedo-ansi */
-  "nop", "", 0,                        /* old (for operator=) */
-};
-
-/* Beware: these aren't '\0' terminated. */
-
-typedef struct string {
-  char *b;                     /* pointer to start of string */
-  char *p;                     /* pointer after last character */
-  char *e;                     /* pointer after end of allocated space */
-} string;
-
-static void
-string_need PARAMS ((string *, int));
-
-static void
-string_delete PARAMS ((string *));
-
-static void
-string_init PARAMS ((string *));
-
-static void
-string_clear PARAMS ((string *));
-
-static int
-string_empty PARAMS ((string *));
-
-static void
-string_append PARAMS ((string *, const char *));
-
-static void
-string_appends PARAMS ((string *, string *));
-
-static void
-string_appendn PARAMS ((string *, const char *, int));
-
-static void
-string_prepend PARAMS ((string *, const char *));
-
-static void
-string_prependn PARAMS ((string *, const char *, int));
-
-static int
-get_count PARAMS ((const char **, int *));
-
-static int
-do_args PARAMS ((const char **, string *, int));
-
-static int
-do_type PARAMS ((const char **, string *, int));
-
-static int
-do_arg PARAMS ((const char **, string *, int));
-
-static void
-munge_function_name PARAMS ((string *, int));
-
-static void
-remember_type PARAMS ((const char *, int));
-
-#if 0
-static void
-string_prepends PARAMS ((string *, string *));
-#endif
-
-
-/* Takes operator name as e.g. "++" and returns mangled
-   operator name (e.g. "postincrement_expr"), or NULL if not found.
-
-   If ARG_MODE == 1, return the ANSI name;
-   if ARG_MODE == 0 return the old GNU name.  */
-char *
-cplus_mangle_opname (opname, arg_mode)
-     char *opname;
-     int arg_mode;
-{
-  int i, len = strlen (opname);
-
-  if (arg_mode != 0 && arg_mode != 1)
-    einfo ("%P%F: invalid arg_mode");
-
-  for (i = 0; i < sizeof (optable)/sizeof (optable[0]); i++)
-    {
-      if (strlen (optable[i].out) == len
-         && arg_mode == optable[i].ansi
-         && memcmp (optable[i].out, opname, len) == 0)
-       return (char *)optable[i].in;
-    }
-  return 0;
-}
-
-char *
-cplus_demangle (type, arg_mode)
-     const char *type;
-     int arg_mode;
-{
-  string decl;
-  int n;
-  int success = 0;
-  int constructor = 0;
-  int destructor = 0;
-  int static_type = 0;
-  int const_flag = 0;
-  int i;
-  const char *p;
-#ifndef LONGERNAMES
-  const char *premangle;
-#endif
-
-# define print_ansi_qualifiers (arg_mode >  0)
-# define print_arg_types       (arg_mode >= 0)
-
-  if (type == NULL || *type == '\0')
-    return NULL;
-#ifndef nounderscore
-  if (*type++ != '_')
-    return NULL;
-#endif
-  p = type;
-  while (*p != '\0' && !(*p == '_' && p[1] == '_'))
-    p++;
-  if (*p == '\0')
-    {
-      /* destructor */
-      if (type[0] == '_' && type[1] == CPLUS_MARKER && type[2] == '_')
-       {
-         int n;
-         char *tem;
-
-         type += 3;            /* Get past _$_ at front.  */
-         while (isdigit (*type))
-           /* If there are digits at the front, it's because
-              of new 2.0 name mangling.  Just skip them.  */
-           type++;
-
-         n = strlen (type)*2 + 3 + 2 + 1;
-         tem = (char *) xmalloc (n);
-         strcpy (tem, type);
-         strcat (tem, "::~");
-         strcat (tem, type);
-         if (print_arg_types)
-           strcat (tem, "()");
-         return tem;
-       }
-      /* static data member */
-      if (*type != '_' && (p = strchr (type, CPLUS_MARKER)) != NULL)
-       {
-         int n = strlen (type) + 2;
-         char *tem = (char *) xmalloc (n);
-         memcpy (tem, type, p - type);
-         strcpy (tem + (p - type), "::");
-         strcpy (tem + (p - type) + 2, p + 1);
-         return tem;
-       }
-      /* virtual table "_vt$"  */
-      if (type[0] == '_' && type[1] == 'v' && type[2] == 't' && type[3] == CPLUS_MARKER)
-       {
-         int n = strlen (type + 4) + 14 + 1;
-         char *tem = (char *) xmalloc (n);
-         strcpy (tem, type + 4);
-         strcat (tem, " virtual table");
-         return tem;
-       }
-      return NULL;
-    }
-
-  string_init (&decl);
-
-  if (static_type)
-    {
-      if (!isdigit (p[0]) && ('t' != p[0]))
-       {
-         string_delete (&decl);
-         return NULL;
-       }
-    }
-  else if (p == type)
-    {
-      if (!isdigit (p[2]) && ('t' != p[2]))
-       {
-         p += 1;
-         while (*p != '\0' && !(*p == '_' && p[1] == '_'))
-           p++;
-         string_appendn (&decl, type, p - type);
-         string_need (&decl, 1);
-         *(decl.p) = '\0';
-         munge_function_name (&decl, 1);
-         if (decl.b[0] == '_')
-           {
-             string_delete (&decl);
-             return NULL;
-           }
-         else
-           p += 2;
-       }
-      else
-       {
-         constructor = 1;
-         p += 2;
-       }
-    }
-  else
-    {
-      string_appendn (&decl, type, p - type);
-      string_need (&decl, 1);
-      *(decl.p) = '\0';
-      munge_function_name (&decl, arg_mode);
-      p += 2;
-    }
-
-#ifndef LONGERNAMES
-  premangle = p;
-#endif
-  switch (*p)
-    {
-    case 'C':
-      /* a const member function */
-      if (!isdigit (p[1]))
-       {
-         string_delete (&decl);
-         return NULL;
-       }
-      p += 1;
-      const_flag = 1;
-      /* fall through */
-    case '0':
-    case '1':
-    case '2':
-    case '3':
-    case '4':
-    case '5':
-    case '6':
-    case '7':
-    case '8':
-    case '9':
-      n = 0;
-      do
-       {
-         n *= 10;
-         n += *p - '0';
-         p += 1;
-       }
-      while (isdigit (*p));
-      if (strlen (p) < n)
-       {
-         string_delete (&decl);
-         return NULL;
-       }
-      if (constructor || destructor)
-       {
-         string_appendn (&decl, p, n);
-         string_append (&decl, "::");
-         if (destructor)
-           string_append(&decl, "~");
-         string_appendn (&decl, p, n);
-       }
-      else
-       {
-         string_prepend (&decl, "::");
-         string_prependn (&decl, p, n);
-       }
-      p += n;
-#ifndef LONGERNAMES
-      remember_type (premangle, p - premangle);
-#endif
-      if (static_type)
-       {
-         string_append(&decl, p+1);
-         p += strlen(p);
-         success = 1;
-       }
-      else
-       success = do_args (&p, &decl, arg_mode);
-      if (const_flag && print_arg_types)
-       string_append (&decl, " const");
-      break;
-    case 'F':
-      p += 1;
-      success = do_args (&p, &decl, arg_mode);
-      break;
-    /* template additions */
-    case 't':
-      p += 1;
-      {
-       int r, i;
-       int non_empty = 0;
-       string tname;
-       string trawname;
-       
-       string temp;
-       int need_comma = 0;
-       
-       string_init(&tname);
-       string_init(&trawname);
-       
-       /* get template name */
-       if (!get_count (&p, &r))
-         return 0;
-       string_appendn (&tname, p, r);
-       string_appendn (&trawname, p, r);
-       string_appendn (&trawname, "", 1);
-       p += r;
-       string_append (&tname, "<");
-       /* get size of template parameter list */
-       if (!get_count (&p, &r))
-         return 0;
-       for (i = 0; i < r; i++)
-         {
-           if (need_comma)
-             string_append (&tname, ", ");
-           /* Z for type parameters */
-           if (*p == 'Z')
-             {
-               p += 1;
-               
-               success = do_type (&p, &temp, arg_mode);
-               string_appendn (&temp, "", 1);
-               if (success)
-                 string_append (&tname, temp.b);
-               string_delete(&temp);
-               if (!success)
-                 break;
-             }
-           /* otherwise, value parameter */
-           else
-             {
-               const char *old_p  = p;
-               int is_pointer = 0;
-               int is_real = 0;
-               int is_integral = 0;
-               int done = 0;
-
-               success = do_type (&p, &temp, arg_mode);
-               string_appendn (&temp, "", 1);
-               if (success)
-                 string_append (&tname, temp.b);
-               string_delete(&temp);
-               if (!success)
-                 break;
-               string_append (&tname, "=");
-               while (*old_p && !done)
-                 {     
-                   switch (*old_p)
-                     {
-                     case 'P':
-                     case 'R':
-                       done = is_pointer = 1;
-                       break;
-                     case 'C': /* const */
-                     case 'U': /* unsigned */
-                     case 'V': /* volatile */
-                     case 'F': /* function */
-                     case 'M': /* member function */
-                     case 'O': /* ??? */
-                       old_p++;
-                       continue;
-                     case 'Q': /* repetition of following */
-                     case 'T': /* remembered type */
-                       abort();
-                       break;
-                     case 'v': /* void */
-                       abort();
-                       break;
-                     case 'x': /* long long */
-                     case 'l': /* long */
-                     case 'i': /* int */
-                     case 's': /* short */
-                     case 'c': /* char */
-                       done = is_integral = 1;
-                       break;
-                     case 'r': /* long double */
-                     case 'd': /* double */
-                     case 'f': /* float */
-                       done = is_real = 1;
-                       break;
-                     default:
-                       abort();
-                     }
-                 }
-               if (is_integral)
-                 {
-                   if (*p == 'm')
-                     {
-                       string_appendn (&tname, "-", 1);
-                       p++;
-                     }
-                   while (isdigit (*p))        
-                     {
-                       string_appendn (&tname, p, 1);
-                       p++;
-                     }
-                 }
-               else if (is_real)
-                 {
-                   if (*p == 'm')
-                     {
-                       string_appendn (&tname, "-", 1);
-                       p++;
-                     }
-                   while (isdigit (*p))        
-                     {
-                       string_appendn (&tname, p, 1);
-                       p++;
-                     }
-                   if (*p == '.') /* fraction */
-                     {
-                       string_appendn (&tname, ".", 1);
-                       p++;
-                       while (isdigit (*p))    
-                         {
-                           string_appendn (&tname, p, 1);
-                           p++;
-                         }
-                     }
-                   if (*p == 'e') /* exponent */
-                     {
-                       string_appendn (&tname, "e", 1);
-                       p++;
-                       while (isdigit (*p))    
-                         {
-                           string_appendn (&tname, p, 1);
-                           p++;
-                         }
-                     }
-                 }
-               else if (is_pointer)
-                 {
-                   int symbol_len;
-                   
-                   if (!get_count (&p, &symbol_len))
-                     {
-                       success = 0;
-                       break;
-                     }
-                   string_appendn (&tname, p, symbol_len);
-                   p += symbol_len;
-                 }
-             }
-           need_comma = 1;
-         }
-       string_append (&tname, ">::");
-       if (destructor)
-         string_append(&tname, "~");
-       if (constructor || destructor) {
-         string_append (&tname, trawname.b);
-       }
-       string_delete(&trawname);
-       
-       if (!success) {
-         string_delete(&tname);
-         return 0;
-       }
-       string_prepend (&decl, tname.b);
-       string_delete(&tname);
-
-       if (static_type)
-         {
-           string_append(&decl, p+1);
-           p += strlen(p);
-           success = 1;
-         }
-       else
-         success = do_args (&p, &decl, arg_mode);
-       break;
-      }
-    }
-
-  for (i = 0; i < ntypes; i++)
-    if (typevec[i] != NULL)
-      free (typevec[i]);
-  ntypes = 0;
-  if (typevec != NULL)
-    {
-      free ((char *)typevec);
-      typevec = NULL;
-      typevec_size = 0;
-    }
-
-  if (success)
-    {
-      string_appendn (&decl, "", 1);
-      return decl.b;
-    }
-  else
-    {
-      string_delete (&decl);
-      return NULL;
-    }
-}
-
-static int
-get_count (type, count)
-     const char **type;
-     int *count;
-{
-  if (!isdigit (**type))
-    return 0;
-  *count = **type - '0';
-  *type += 1;
-  /* see flush_repeats in cplus-method.c */
-  if (isdigit (**type))
-    {
-      const char *p = *type;
-      int n = *count;
-      do 
-       {
-         n *= 10;
-         n += *p - '0';
-         p += 1;
-       } 
-      while (isdigit (*p));
-      if (*p == '_')
-       {
-         *type = p + 1;
-         *count = n;
-       }
-    }
-  return 1;
-}
-
-/* result will be initialised here; it will be freed on failure */
-
-static int
-do_type (type, result, arg_mode)
-     const char **type;
-     string *result;
-     int arg_mode;
-{
-  int n;
-  int done;
-  int non_empty = 0;
-  int success;
-  string decl;
-  const char *remembered_type;
-
-  string_init (&decl);
-  string_init (result);
-
-  done = 0;
-  success = 1;
-  while (success && !done)
-    {
-      int member;
-      switch (**type)
-       {
-       case 'Q':
-         n = (*type)[1] - '0';
-         if (n < 0 || n > 9)
-           success = 0;
-         *type += 2;
-         while (n-- > 0)
-           do_type (type, result, arg_mode);
-         break;
-
-       case 'P':
-         *type += 1;
-         string_prepend (&decl, "*");
-         break;
-
-       case 'R':
-         *type += 1;
-         string_prepend (&decl, "&");
-         break;
-
-       case 'T':
-         *type += 1;
-         if (!get_count (type, &n) || n >= ntypes)
-           success = 0;
-         else
-           {
-             remembered_type = typevec[n];
-             type = &remembered_type;
-           }
-         break;
-
-       case 'F':
-         *type += 1;
-         if (!string_empty (&decl) && decl.b[0] == '*')
-           {
-             string_prepend (&decl, "(");
-             string_append (&decl, ")");
-           }
-         if (!do_args (type, &decl, arg_mode) || **type != '_')
-           success = 0;
-         else
-           *type += 1;
-         break;
-
-       case 'M':
-       case 'O':
-         {
-           int constp = 0;
-           int volatilep = 0;
-
-           member = **type == 'M';
-           *type += 1;
-           if (!isdigit (**type))
-             {
-               success = 0;
-               break;
-             }
-           n = 0;
-           do
-             {
-               n *= 10;
-               n += **type - '0';
-               *type += 1;
-             } 
-           while (isdigit (**type));
-           if (strlen (*type) < n)
-             {
-               success = 0;
-               break;
-             }
-           string_append (&decl, ")");
-           string_prepend (&decl, "::");
-           string_prependn (&decl, *type, n);
-           string_prepend (&decl, "(");
-           *type += n;
-           if (member)
-             {
-               if (**type == 'C')
-                 {
-                   *type += 1;
-                   constp = 1;
-                 }
-               if (**type == 'V')
-                 {
-                   *type += 1;
-                   volatilep = 1;
-                 }
-               if (*(*type)++ != 'F')
-                 {
-                   success = 0;
-                   break;
-                 }
-             }
-           if ((member && !do_args (type, &decl, arg_mode)) || **type != '_')
-             {
-               success = 0;
-               break;
-             }
-           *type += 1;
-           if (! print_ansi_qualifiers)
-             break;
-           if (constp)
-             {
-               if (non_empty)
-                 string_append (&decl, " ");
-               else
-                 non_empty = 1;
-               string_append (&decl, "const");
-             }
-           if (volatilep)
-             {
-               if (non_empty)
-                 string_append (&decl, " ");
-               else
-                 non_empty = 1;
-               string_append (&decl, "volatile");
-             }
-           break;
-         }
-
-       case 'C':
-         if ((*type)[1] == 'P')
-           {
-             *type += 1;
-             if (print_ansi_qualifiers)
-               {
-                 if (!string_empty (&decl))
-                   string_prepend (&decl, " ");
-                 string_prepend (&decl, "const");
-               }
-             break;
-           }
-
-         /* fall through */
-       default:
-         done = 1;
-         break;
-       }
-    }
-
-  done = 0;
-  non_empty = 0;
-  while (success && !done)
-    {
-      switch (**type)
-       {
-       case 'C':
-         *type += 1;
-         if (print_ansi_qualifiers)
-           {
-             if (non_empty)
-               string_append (result, " ");
-             else
-               non_empty = 1;
-             string_append (result, "const");
-           }
-         break;
-       case 'U':
-         *type += 1;
-         if (non_empty)
-           string_append (result, " ");
-         else
-           non_empty = 1;
-         string_append (result, "unsigned");
-         break;
-       case 'V':
-         *type += 1;
-         if (print_ansi_qualifiers)
-           {
-             if (non_empty)
-               string_append (result, " ");
-             else
-               non_empty = 1;
-             string_append (result, "volatile");
-           }
-         break;
-       default:
-         done = 1;
-         break;
-       }
-    }
-
-  if (success)
-    switch (**type)
-      {
-      case '\0':
-      case '_':
-       break;
-      case 'v':
-       *type += 1;
-       if (non_empty)
-         string_append (result, " ");
-       string_append (result, "void");
-       break;
-      case 'x':
-       *type += 1;
-       if (non_empty)
-         string_append (result, " ");
-       string_append (result, "long long");
-       break;
-      case 'l':
-       *type += 1;
-       if (non_empty)
-         string_append (result, " ");
-       string_append (result, "long");
-       break;
-      case 'i':
-       *type += 1;
-       if (non_empty)
-         string_append (result, " ");
-       string_append (result, "int");
-       break;
-      case 's':
-       *type += 1;
-       if (non_empty)
-         string_append (result, " ");
-       string_append (result, "short");
-       break;
-      case 'c':
-       *type += 1;
-       if (non_empty)
-         string_append (result, " ");
-       string_append (result, "char");
-       break;
-      case 'r':
-       *type += 1;
-       if (non_empty)
-         string_append (result, " ");
-       string_append (result, "long double");
-       break;
-      case 'd':
-       *type += 1;
-       if (non_empty)
-         string_append (result, " ");
-       string_append (result, "double");
-       break;
-      case 'f':
-       *type += 1;
-       if (non_empty)
-         string_append (result, " ");
-       string_append (result, "float");
-       break;
-      case 'G':
-       *type += 1;
-       if (!isdigit (**type))
-         {
-           success = 0;
-           break;
-         }
-       /* fall through */
-      case '0':
-      case '1':
-      case '2':
-      case '3':
-      case '4':
-      case '5':
-      case '6':
-      case '7':
-      case '8':
-      case '9':
-       n = 0;
-       do
-         {
-           n *= 10;
-           n += **type - '0';
-           *type += 1;
-         }
-       while (isdigit (**type));
-       if (strlen (*type) < n)
-         {
-           success = 0;
-           break;
-         }
-       if (non_empty)
-         string_append (result, " ");
-       string_appendn (result, *type, n);
-       *type += n;
-       break;
-      default:
-       success = 0;
-       break;
-      }
-
-  if (success)
-    {
-      if (!string_empty (&decl))
-       {
-         string_append (result, " ");
-         string_appends (result, &decl);
-       }
-      string_delete (&decl);
-      return 1;
-    }
-  else
-    {
-      string_delete (&decl);
-      string_delete (result);
-      return 0;
-    }
-}
-
-/* `result' will be initialised in do_type; it will be freed on failure */
-
-static int
-do_arg (type, result, arg_mode)
-     const char **type;
-     string *result;
-     int arg_mode;
-{
-  const char *start = *type;
-
-  if (!do_type (type, result, arg_mode))
-    return 0;
-  remember_type (start, *type - start);
-  return 1;
-}
-
-static void
-remember_type (start, len)
-     const char *start;
-     int len;
-{
-  char *tem;
-
-  if (ntypes >= typevec_size)
-    {
-      if (typevec_size == 0)
-       {
-         typevec_size = 3;
-         typevec = (char **) xmalloc (sizeof (char*)*typevec_size);
-       }
-      else
-       {
-         typevec_size *= 2;
-         typevec = (char **) xrealloc ((char *)typevec, sizeof (char*)*typevec_size);
-       }
-    }
-  tem = (char *) xmalloc (len + 1);
-  memcpy (tem, start, len);
-  tem[len] = '\0';
-  typevec[ntypes++] = tem;
-}
-
-/* `decl' must be already initialised, usually non-empty;
-   it won't be freed on failure */
-
-static int
-do_args (type, decl, arg_mode)
-     const char **type;
-     string *decl;
-     int arg_mode;
-{
-  string arg;
-  int need_comma = 0;
-
-  if (print_arg_types)
-    string_append (decl, "(");
-
-  while (**type != '_' && **type != '\0' && **type != 'e' && **type != 'v')
-    {
-      if (**type == 'N')
-       {
-         int r;
-         int t;
-         *type += 1;
-         if (!get_count (type, &r) || !get_count (type, &t) || t >= ntypes)
-           return 0;
-         while (--r >= 0)
-           {
-             const char *tem = typevec[t];
-             if (need_comma && print_arg_types)
-               string_append (decl, ", ");
-             if (!do_arg (&tem, &arg, arg_mode))
-               return 0;
-             if (print_arg_types)
-               string_appends (decl, &arg);
-             string_delete (&arg);
-             need_comma = 1;
-           }
-       }
-      else
-       {
-         if (need_comma & print_arg_types)
-           string_append (decl, ", ");
-         if (!do_arg (type, &arg, arg_mode))
-           return 0;
-         if (print_arg_types)
-           string_appends (decl, &arg);
-         string_delete (&arg);
-         need_comma = 1;
-       }
-    }
-
-  if (**type == 'v')
-    *type += 1;
-  else if (**type == 'e')
-    {
-      *type += 1;
-      if (print_arg_types)
-       {
-         if (need_comma)
-           string_append (decl, ",");
-         string_append (decl, "...");
-       }
-    }
-
-  if (print_arg_types)
-    string_append (decl, ")");
-  return 1;
-}
-
-static void
-munge_function_name (name, arg_mode)
-     string *name;
-     int arg_mode;
-{
-  if (string_empty (name))
-    return;
-
-  if (name->p - name->b >= 3 
-      && name->b[0] == 'o' && name->b[1] == 'p' && name->b[2] == CPLUS_MARKER)
-    {
-      int i;
-      /* see if it's an assignment expression */
-      if (name->p - name->b >= 10 /* op$assign_ */
-         && memcmp (name->b + 3, "assign_", 7) == 0)
-       {
-         for (i = 0; i < sizeof (optable)/sizeof (optable[0]); i++)
-           {
-             int len = name->p - name->b - 10;
-             if (strlen (optable[i].in) == len
-                 && memcmp (optable[i].in, name->b + 10, len) == 0)
-               {
-                 string_clear (name);
-                 string_append (name, "operator");
-                 string_append (name, optable[i].out);
-                 string_append (name, "=");
-                 return;
-               }
-           }
-       }
-      else
-       {
-         for (i = 0; i < sizeof (optable)/sizeof (optable[0]); i++)
-           {
-             int len = name->p - name->b - 3;
-             if (strlen (optable[i].in) == len 
-                 && memcmp (optable[i].in, name->b + 3, len) == 0)
-               {
-                 string_clear (name);
-                 string_append (name, "operator");
-                 string_append (name, optable[i].out);
-                 return;
-               }
-           }
-       }
-      return;
-    }
-  else if (name->p - name->b >= 5 && memcmp (name->b, "type$", 5) == 0)
-    {
-      /* type conversion operator */
-      string type;
-      const char *tem = name->b + 5;
-      if (do_type (&tem, &type, arg_mode))
-       {
-         string_clear (name);
-         string_append (name, "operator ");
-         string_appends (name, &type);
-         string_delete (&type);
-         return;
-       }
-    }
-  /* ANSI.  */
-  else if (name->b[2] == 'o' && name->b[3] == 'p')
-    {
-      /* type conversion operator.  */
-      string type;
-      const char *tem = name->b + 4;
-      if (do_type (&tem, &type, arg_mode))
-       {
-         string_clear (name);
-         string_append (name, "operator ");
-         string_appends (name, &type);
-         string_delete (&type);
-         return;
-       }
-    }
-  else if (name->b[0] == '_' && name->b[1] == '_'
-          && name->b[2] >= 'a' && name->b[2] <= 'z'
-          && name->b[3] >= 'a' && name->b[3] <= 'z')
-    {
-      int i;
-
-      if (name->b[4] == '\0')
-       {
-         /* Operator.  */
-         for (i = 0; i < sizeof (optable)/sizeof (optable[0]); i++)
-           {
-             if (strlen (optable[i].in) == 2
-                 && memcmp (optable[i].in, name->b + 2, 2) == 0)
-               {
-                 string_clear (name);
-                 string_append (name, "operator");
-                 string_append (name, optable[i].out);
-                 return;
-               }
-           }
-       }
-      else
-       {
-         if (name->b[2] != 'a' || name->b[5] != '\0')
-           return;
-         /* Assignment.  */
-         for (i = 0; i < sizeof (optable)/sizeof (optable[0]); i++)
-           {
-             if (strlen (optable[i].in) == 3
-                 && memcmp (optable[i].in, name->b + 2, 3) == 0)
-               {
-                 string_clear (name);
-                 string_append (name, "operator");
-                 string_append (name, optable[i].out);
-                 return;
-               }
-           }
-       }
-    }
-}
-
-/* a mini string-handling package */
-
-static void
-string_need (s, n)
-     string *s;
-     int n;
-{
-  if (s->b == NULL)
-    {
-      if (n < 32)
-       n = 32;
-      s->p = s->b = (char *) xmalloc (n);
-      s->e = s->b + n;
-    }
-  else if (s->e - s->p < n)
-    {
-      int tem = s->p - s->b;
-      n += tem;
-      n *= 2;
-      s->b = (char *) xrealloc (s->b, n);
-      s->p = s->b + tem;
-      s->e = s->b + n;
-    }
-}
-
-static void
-string_delete (s)
-     string *s;
-{
-  if (s->b != NULL)
-    {
-      free (s->b);
-      s->b = s->e = s->p = NULL;
-    }
-}
-
-static void
-string_init (s)
-     string *s;
-{
-  s->b = s->p = s->e = NULL;
-}
-
-static void 
-string_clear (s)
-     string *s;
-{
-  s->p = s->b;
-}
-
-static int
-string_empty (s)
-     string *s;
-{
-  return s->b == s->p;
-}
-
-static void
-string_append (p, s)
-     string *p;
-     const char *s;
-{
-  int n;
-  if (s == NULL || *s == '\0')
-    return;
-  n = strlen (s);
-  string_need (p, n);
-  memcpy (p->p, s, n);
-  p->p += n;
-}
-
-static void
-string_appends (p, s)
-     string *p, *s;
-{
-  int n;
-  if (s->b == s->p)
-    return;
-  n = s->p - s->b;
-  string_need (p, n);
-  memcpy (p->p, s->b, n);
-  p->p += n;
-}
-
-static void
-string_appendn (p, s, n)
-     string *p;
-     const char *s;
-     int n;
-{
-  if (n == 0)
-    return;
-  string_need (p, n);
-  memcpy (p->p, s, n);
-  p->p += n;
-}
-
-static void
-string_prepend (p, s)
-     string *p;
-     const char *s;
-{
-  if (s == NULL || *s == '\0')
-    return;
-  string_prependn (p, s, strlen (s));
-}
-
-#if 0
-static void
-string_prepends (p, s)
-     string *p, *s;
-{
-  if (s->b == s->p)
-    return;
-  string_prependn (p, s->b, s->p - s->b);
-}
-#endif
-
-static void
-string_prependn (p, s, n)
-     string *p;
-     const char *s;
-     int n;
-{
-  char *q;
-
-  if (n == 0)
-    return;
-  string_need (p, n);
-  for (q = p->p - 1; q >= p->b; q--)
-    q[n] = q[0];
-  memcpy (p->b, s, n);
-  p->p += n;
-}
diff --git a/ld/descrip.mms b/ld/descrip.mms
deleted file mode 100644 (file)
index e9487d1..0000000
+++ /dev/null
@@ -1,83 +0,0 @@
-# mms file to build vms-i960 ld
-# sac@cygnus.com
-
-.FIRST
-       @[-.deci960]define-gnu
-
-
-CC     = gcc
-CFLAGS = /define=(VMS, LNK960_LITTLE) /cc1_options="-mvaxc-alignment"  /inc=([],[-.include],[-.bfd], [-.include.aout])
-
-all  : ld.exe
-       copy descrip.mms all
-
-BFD_OBJ        = [-.bfd]archive.obj, -
-       [-.bfd]coff-i960.obj, -
-       [-.bfd]format.obj, -
-       [-.bfd]reloc.obj, -
-       [-.bfd]archures.obj, -
-       [-.bfd]core.obj, -
-       [-.bfd]init.obj, -
-       [-.bfd]section.obj, -
-       [-.bfd]bfd.obj, -
-       [-.bfd]cpu-i960.obj, -
-       [-.bfd]libbfd.obj, -
-       [-.bfd]srec.obj, -
-       [-.bfd]cache.obj, -
-       [-.bfd]ctor.obj, -
-       [-.bfd]opncls.obj, -
-       [-.bfd]targets.obj, -
-       [-.bfd]syms.obj,-
-       [-.bfd]seclet.obj
-
-LIBIBERTY_OBJ = -
-[]bzero.obj, getopt1.obj,obstack.obj,[-.libiberty]bcopy.obj,-
-[-.libiberty]getopt.obj,[-.libiberty]index.obj,[-.libiberty]strdup.obj,alloca.obj
-
-LD_OBJ = -
-cplus-dem.obj, -
-ld__a29k.obj, -
-ld__ebmon29k.obj, -
-ld__gld960.obj, -
-ld__go32.obj, -
-ld__h8300hms.obj, -
-ld__h8300xray.obj, -
-ld__hp300bsd.obj, -
-ld__i386aout.obj, -
-ld__lnk960.obj, -
-ld__m88kbcs.obj, -
-ld__news.obj, -
-ld__st2000.obj, -
-ld__sun3.obj, -
-ld__sun4.obj, -
-ld__vanilla.obj, -
-ldctor.obj, -
-ldemul.obj, -
-lderror.obj, -
-ldexp.obj, -
-ldfile.obj, -
-ldgram.obj, -
-ldindr.obj, -
-ldlang.obj, -
-ldlex.obj, -
-ldmain.obj, -
-ldsym.obj, -
-ldver.obj, -
-ldwarn.obj, -
-ldmisc.obj,-
-ldwrite.obj, -
-lexsup.obj, -
-mri.obj, -
-relax.obj
-
-       
-LIBS=$(BFD_OBJ), $(LIBIBERTY_OBJ)
-
-ld.exe : $(LD_OBJ)
-       copy [-.libiberty]bzero.obj []
-       copy [-.libiberty]getopt1.obj []
-       copy [-.libiberty]obstack.obj []
-       $(LINK)/exe=ld.exe  $(LD_OBJ), $(LIBS)
-
-
-
diff --git a/ld/ebmon29k.sc b/ld/ebmon29k.sc
deleted file mode 100755 (executable)
index da1a76a..0000000
+++ /dev/null
@@ -1,27 +0,0 @@
-OUTPUT_FORMAT("coff-a29k-big")
-ENTRY(start)
-
-SECTIONS {
-       .text 0x8000 : 
-               {
-                *(.text);
-               _etext = . ;
-               }
-       .data 0x80002000 :
-               {
-                *(.data);
-                *(.mstack); 
-                *(.shbss);
-                *(.rstack);
-               *(.mstack);
-               CONSTRUCTORS
-               }
-       .bss  . :
-               { 
-
-               *(COMMON)       
-               *(.bss);
-               _end = .;
-                } 
-
-}
diff --git a/ld/gld.1 b/ld/gld.1
deleted file mode 100644 (file)
index 2579063..0000000
--- a/ld/gld.1
+++ /dev/null
@@ -1,1044 +0,0 @@
-.\" Copyright (c) 1991, 1992 Free Software Foundation
-.\" See section COPYING for conditions for redistribution
-.TH gld 1 "23 January 1992" "cygnus support" "GNU Development Tools"
-.de BP
-.sp
-.ti \-.2i
-\(**
-..
-
-.SH NAME
-gld \- the GNU linker
-
-.SH SYNOPSIS
-.hy 0
-.na
-.TP
-.B gld 
-.RB "[\|" \-o "
-.I output\c
-\&\|] \c
-.I objfiles\c
-\&.\|.\|.
-.br
-.RB "[\|" \-A\c
-.I architecture\c
-\&\|] 
-.RB "[\|" "\-b\ "\c
-.I input-format\c
-\&\|] 
-.RB "[\|" \-Bstatic "\|]"  
-.RB "[\|" "\-c\ "\c
-.I commandfile\c
-\&\|] 
-.RB "[\|" \-d | \-dc | \-dp\c
-\|]
-.br
-.RB "[\|" "\-defsym\ "\c
-.I symbol\c
-\& = \c
-.I expression\c
-\&\|]
-.RB "[\|" "\-e\ "\c
-.I entry\c
-\&\|] 
-.RB "[\|" \-F "\|]" 
-.RB "[\|" "\-F\ "\c
-.I format\c
-\&\|]
-.RB "[\|" "\-format\ "\c
-.I input-format\c
-\&\|] 
-.RB "[\|" \-g "\|]" 
-.RB "[\|" \-i "\|]"
-.RB "[\|" \-l\c
-.I ar\c
-\&\|] 
-.RB "[\|" \-L\c
-.I searchdir\c
-\&\|] 
-.RB "[\|" \-M | \-m "\|]"  
-.RB "[\|" \-n | \-N "\|]" 
-.RB "[\|" \-noinhibit-exec "\|]" 
-.RB "[\|" "\-R\ "\c
-.I filename\c
-\&\|]
-.RB "[\|" \-relax "\|]"
-.RB "[\|" \-r | \-Ur "\|]" 
-.RB "[\|" \-S "\|]" 
-.RB "[\|" \-s "\|]" 
-.RB "[\|" "\-T\ "\c
-.I commandfile\c
-\&\|]  
-.RB "[\|" "\-Ttext\ "\c
-.I textorg\c
-\&\|] 
-.RB "[\|" "\-Tdata\ "\c
-.I dataorg\c
-\&\|] 
-.RB "[\|" "\-Tbss\ "\c
-.I bssorg\c
-\&\|]
-.RB "[\|" \-t "\|]" 
-.RB "[\|" "\-u\ "\c
-.I sym\c
-\&]
-.RB "[\|" \-v "\|]"
-.RB "[\|" \-X "\|]" 
-.RB "[\|" \-x "\|]" 
-.RB "[\|" { \c
-.I script\c
-.BR } "\|]" 
-.ad b
-.hy 1
-.SH DESCRIPTION
-\c
-.B gld\c
-\& combines a number of object and archive files, relocates
-their data and ties up symbol references. Often the last step in
-building a new compiled program to run is a call to \c
-.B gld\c
-\&.
-
-\c
-.B gld\c
-\& accepts Linker Command Language files 
-to provide explicit and total control over the linking process.
-This man page does not describe the command language; see the `\|\c
-.B ld\c
-\|' entry in `\|\c
-.B info\c
-\|', or the manual
-.I
-gld: the GNU linker
-\&, for full details on the command language and on other aspects of
-the GNU linker. 
-
-This version of \c
-.B gld\c
-\& uses the general purpose BFD libraries
-to operate on object files. This allows \c
-.B gld\c
-\& to read, combine, and
-write object files in many different formats\(em\&for example, COFF or
-\c
-.B a.out\c
-\&.  Different formats may be linked together to produce any
-available kind of object file.  You can use `\|\c
-.B objdump \-i\c
-\|' to get a list of formats supported on various architectures; see 
-.BR objdump ( 1 ).
-
-Aside from its flexibility, the GNU linker is more helpful than other
-linkers in providing diagnostic information.  Many linkers abandon
-execution immediately upon encountering an error; whenever possible,
-\c
-.B gld\c
-\& continues executing, allowing you to identify other errors
-(or, in some cases, to get an output file in spite of the error).
-
-The GNU linker \c
-.B gld\c
-\& is meant to cover a broad range of situations,
-and to be as compatible as possible with other linkers.  As a result,
-you have many choices to control its behavior through the command line,
-and through environment variables.
-
-.SH OPTIONS
-The plethora of command-line options may seem intimidating, but in
-actual practice few of them are used in any particular context.
-For instance, a frequent use of \c
-.B gld\c
-\& is to link standard Unix
-object files on a standard, supported Unix system.  On such a system, to
-link a file \c
-.B hello.o\c
-\&:
-.sp
-.br
-$\ gld\ \-o\ output\ /lib/crt0.o\ hello.o\ \-lc
-.br
-.sp
-This tells \c
-.B gld\c
-\& to produce a file called \c
-.B output\c
-\& as the
-result of linking the file \c
-.B /lib/crt0.o\c
-\& with \c
-.B hello.o\c
-\& and
-the library \c
-.B libc.a\c
-\& which will come from the standard search
-directories.
-
-The command-line options to \c
-.B gld\c
-\& may be specified in any order, and
-may be repeated at will.  For the most part, repeating an option with a
-different argument will either have no further effect, or override prior
-occurrences (those further to the left on the command line) of an
-option.  
-
-The exceptions\(em\&which may meaningfully be used more than once\(em\&are
-\c
-.B \-A\c
-\&, \c
-.B \-b\c
-\& (or its synonym \c
-.B \-format\c
-\&), \c
-.B \-defsym\c
-\&,
-\c
-.B \-L\c
-\&, \c
-.B \-l\c
-\&, \c
-.B \-R\c
-\&, and \c
-.B \-u\c
-\&.
-
-The list of object files to be linked together, shown as \c
-.I objfiles\c
-\&,
-may follow, precede, or be mixed in with command-line options; save that
-an \c
-.I objfiles\c
-\& argument may not be placed between an option flag and
-its argument.
-
-Usually the linker is invoked with at least one object file, but other
-forms of binary input files can also be specified with \c
-.B \-l\c
-\&,
-\c
-.B \-R\c
-\&, and the script command language.  If \c
-.I no\c
-\& binary input
-files at all are specified, the linker does not produce any output, and
-issues the message `\|\c
-.B No input files\c
-\|'.
-
-Option arguments must either follow the option letter without intervening
-whitespace, or be given as separate arguments immediately following the
-option that requires them.
-
-.TP
-.IR "objfiles" .\|.\|.
-The object files \c
-.I objfiles\c
-\& to be linked.
-
-.TP
-.BI "-A" "architecture"\c
-\&
-In the current release of \c
-.B gld\c
-\&, this option is useful only for the
-Intel 960 family of architectures.  In that \c
-.B gld\c
-\& configuration, the
-\c
-.I architecture\c
-\& argument is one of the two-letter names identifying
-members of the 960 family; the option specifies the desired output
-target, and warns of any incompatible instructions in the input files.
-It also modifies the linker's search strategy for archive libraries, to
-support the use of libraries specific to each particular
-architecture, by including in the search loop names suffixed with the
-string identifying the architecture.
-
-For example, if your \c
-.B gld\c
-\& command line included `\|\c
-.B \-ACA\c
-\|' as
-well as `\|\c
-.B \-ltry\c
-\|', the linker would look (in its built-in search
-paths, and in any paths you specify with \c
-.B \-L\c
-\&) for a library with
-the names
-.sp
-.br
-try
-.br
-libtry.a
-.br
-tryca
-.br
-libtryca.a
-.br
-.sp
-
-The first two possibilities would be considered in any event; the last
-two are due to the use of `\|\c
-.B \-ACA\c
-\|'.
-
-Future releases of \c
-.B gld\c
-\& may support similar functionality for
-other architecture families.
-
-You can meaningfully use \c
-.B \-A\c
-\& more than once on a command line, if
-an architecture family allows combination of target architectures; each
-use will add another pair of name variants to search for when \c
-.B \-l\c
-\&
-specifies a library.
-
-.TP
-.BI "-b " "input-format"\c
-\&
-Specify the binary format for input object files that follow this option
-on the command line.  You don't usually need to specify this, as
-\c
-.B gld\c
-\& is configured to expect as a default input format the most
-usual format on each machine.  \c
-.I input-format\c
-\& is a text string, the
-name of a particular format supported by the BFD libraries.  
-\c
-.B \-format \c
-.I input-format\c
-\&\c
-\& has the same effect.
-
-You may want to use this option if you are linking files with an unusual
-binary format.  You can also use \c
-.B \-b\c
-\& to switch formats explicitly (when
-linking object files of different formats), by including
-\c
-.B \-b \c
-.I input-format\c
-\&\c
-\& before each group of object files in a
-particular format.  
-
-The default format is taken from the environment variable
-.B GNUTARGET\c
-\&.  You can also define the input
-format from a script, using the command \c
-.B TARGET\c
-\&.
-
-.TP
-.B \-Bstatic 
-This flag is accepted for command-line compatibility with the SunOS linker,
-but has no effect on \c
-.B gld\c
-\&.
-
-.TP
-.BI "-c " "commandfile"\c
-\&
-Directs \c
-.B gld\c
-\& to read link commands from the file
-\c
-.I commandfile\c
-\&.  These commands will completely override \c
-.B gld\c
-\&'s
-default link format (rather than adding to it); \c
-.I commandfile\c
-\& must
-specify everything necessary to describe the target format.
-
-
-You may also include a script of link commands directly in the command
-line by bracketing it between `\|\c
-.B {\c
-\|' and `\|\c
-.B }\c
-\|' characters.
-
-.TP
-.B \-d 
-.TP
-.B \-dc
-.TP
-.B \-dp
-These three options are equivalent; multiple forms are supported for
-compatibility with other linkers.  Use any of them to make \c
-.B ld\c
-\&
-assign space to common symbols even if a relocatable output file is
-specified (\c
-.B \-r\c
-\&).  The script command
-\c
-.B FORCE_COMMON_ALLOCATION\c
-\& has the same effect.
-
-.TP
-.BI "-defsym " "symbol"\c
-\& = \c
-.I expression\c
-\&
-Create a global symbol in the output file, containing the absolute
-address given by \c
-.I expression\c
-\&.  You may use this option as many
-times as necessary to define multiple symbols in the command line.  A
-limited form of arithmetic is supported for the \c
-.I expression\c
-\& in this
-context: you may give a hexadecimal constant or the name of an existing
-symbol, or use \c
-.B +\c
-\& and \c
-.B \-\c
-\& to add or subtract hexadecimal
-constants or symbols.  If you need more elaborate expressions, consider
-using the linker command language from a script.
-
-.TP
-.BI "-e " "entry"\c
-\& 
-Use \c
-.I entry\c
-\& as the explicit symbol for beginning execution of your
-program, rather than the default entry point.  for a
-discussion of defaults and other ways of specifying the
-entry point.
-
-.TP
-.B \-F
-.TP
-.BI "-F" "format"\c
-\&
-Some older linkers used this option throughout a compilation toolchain
-for specifying object-file format for both input and output object
-files.  \c
-.B gld\c
-\&'s mechanisms (the \c
-.B \-b\c
-\& or \c
-.B \-format\c
-\& options
-for input files, the \c
-.B TARGET\c
-\& command in linker scripts for output
-files, the \c
-.B GNUTARGET\c
-\& environment variable) are more flexible, but
-but it accepts (and ignores) the \c
-.B \-F\c
-\& option flag for compatibility
-with scripts written to call the old linker.
-
-.TP
-.BI "-format " "input-format"\c
-\&
-Synonym for \c
-.B \-b\c
-\& \c
-.I input-format\c
-\&.
-
-.TP
-.B \-g
-Accepted, but ignored; provided for compatibility with other tools.
-
-.TP
-.B \-i
-Perform an incremental link (same as option \c
-.B \-r\c
-\&).
-
-.TP
-.BI "-l" "ar"\c
-\& 
-Add an archive file \c
-.I ar\c
-\& to the list of files to link.  This 
-option may be used any number of times.  \c
-.B ld\c
-\& will search its
-path-list for occurrences of \c
-.B lib\c
-.I ar\c
-\&.a\c
-\& for every \c
-.I ar\c
-\&
-specified.
-
-.TP
-.BI "-L" "searchdir"\c
-\& 
-This command adds path \c
-.I searchdir\c
-\& to the list of paths that
-\c
-.B gld\c
-\& will search for archive libraries.  You may use this option
-any number of times.
-
-The default set of paths searched (without being specified with
-\c
-.B \-L\c
-\&) depends on what emulation mode \c
-.B gld\c
-\& is using, and in
-some cases also on how it was configured.    The
-paths can also be specified in a link script with the \c
-.B SEARCH_DIR\c
-\&
-command.
-
-.TP
-.B \-M 
-.TP
-.B \-m
-Print (to the standard output file) a link map\(em\&diagnostic information
-about where symbols are mapped by \c
-.B ld\c
-\&, and information on global
-common storage allocation.
-
-.TP
-.B \-N 
-specifies readable and writable \c
-.B text\c
-\& and \c
-.B data\c
-\& sections. If
-the output format supports Unix style magic numbers, the output is
-marked as \c
-.B OMAGIC\c
-\&.
-
-When you use the `\|\c
-.B \-N\c
-\&\|' option, the linker does not page-align the
-data segment.
-
-.TP
-.B \-n 
-sets the text segment to be read only, and \c
-.B NMAGIC\c
-\& is written
-if possible.
-
-.TP
-.B \-noinhibit-exec
-Normally, the linker will not produce an output file if it encounters
-errors during the link process.  With this flag, you can specify that
-you wish the output file retained even after non-fatal errors.
-
-.TP
-.BI "-o " "output"\c
-\&
-.I output\c
-\&
-\c
-.I output\c
-\& is a name for the program produced by \c
-.B ld\c
-\&; if this
-option is not specified, the name `\|\c
-.B a.out\c
-\|' is used by default.  The
-script command \c
-.B OUTPUT\c
-\& can also specify the output file name.
-
-.TP
-.BI "-R " "filename"\c
-\&
-.I file\c
-\&
-Read symbol names and their addresses from \c
-.I filename\c
-\&, but do not
-relocate it or include it in the output.  This allows your output file
-to refer symbolically to absolute locations of memory defined in other
-programs.
-
-.TP
-.B \-relax
-An option with machine dependent effects.  Currently this option is only
-supported on the H8/300.
-
-On some platforms, use this option to perform global optimizations that
-become possible when the linker resolves addressing in your program, such
-as relaxing address modes and synthesizing new instructions in the
-output object file.  
-
-On platforms where this is not supported, `\|\c
-.B \-relax\c
-\&\|' is accepted, but has no effect.
-
-.TP
-.B \-r 
-Generates relocatable output\(em\&i.e., generate an output file that can in
-turn serve as input to \c
-.B gld\c
-\&.  This is often called \c
-.I partial
-linking\c
-\&.  As a side effect, in environments that support standard Unix
-magic numbers, this option also sets the output file's magic number to
-\c
-.B OMAGIC\c
-\&.
-If this option is not specified, an absolute file is produced.  When
-linking C++ programs, this option \c
-.I will not\c
-\& resolve references to
-constructors; \c
-.B \-Ur\c
-\& is an alternative. 
-
-This option does the same as \c
-.B \-i\c
-\&.
-
-.TP
-.B \-S 
-Omits debugger symbol information (but not all symbols) from the output file.
-
-.TP
-.B \-s 
-Omits all symbol information from the output file.
-
-.TP
-.BI "{ " "script" " }"
-You can, if you wish, include a script of linker commands directly in
-the command line instead of referring to it via an input file.  When the
-character `\|\c
-.B {\c
-\|' occurs on the command line, the linker switches to
-interpreting the command language until the end of the list of commands
-is reached\(em\&flagged with a closing brace `\|\c
-.B }\c
-\|'.  Other command-line
-options will not be recognized while parsing the script.
-for a description of the command language.
-
-.TP
-.BI "-Tbss " "org"\c
-.TP
-.BI "-Tdata " "org"\c
-.TP
-.BI "-Ttext " "org"\c
-Use \c
-.I org\c
-\& as the starting address for\(em\&respectively\(em\&the
-\c
-.B bss\c
-\&, \c
-.B data\c
-\&, or the \c
-.B text\c
-\& segment of the output file.
-\c
-.I textorg\c
-\& must be a hexadecimal integer.
-
-.TP
-.BI "-T " "commandfile"\c
-\&
-.TP
-.BI "-T" "commandfile"\c
-Equivalent to \c
-.B \-c \c
-.I commandfile\c
-\&\c
-\&; supported for compatibility with
-other tools.  
-
-.TP
-.B \-t 
-Prints names of input files as \c
-.B ld\c
-\& processes them.
-
-.TP
-.BI "-u " "sym"\c
-\&
-.I sym\c
-\&
-Forces \c
-.I sym\c
-\& to be entered in the output file as an undefined symbol.
-This may, for example, trigger linking of additional modules from
-standard libraries.  \c
-.B \-u\c
-\& may be repeated with different option
-arguments to enter additional undefined symbols.
-
-.TP
-.B \-Ur 
-For anything other than C++ programs, this option is equivalent to
-\c
-.B \-r\c
-\&: it generates relocatable output\(em\&i.e., an output file that can in
-turn serve as input to \c
-.B gld\c
-\&.  When linking C++ programs, \c
-.B \-Ur\c
-\&
-\c
-.I will\c
-\& resolve references to constructors, unlike \c
-.B \-r\c
-\&.
-
-.TP
-.B \-v
-Display the version number for \c
-.B gld\c
-\&.
-
-.TP
-.B \-X 
-If \c
-.B \-s\c
-\& or \c
-.B \-S\c
-\& is also specified, delete only local symbols
-beginning with `\|\c
-.B L\c
-\|'.
-
-.TP
-.B \-x
-If \c
-.B \-s\c
-\& or \c
-.B \-S\c
-\& is also specified, delete all local symbols,
-not just those beginning with `\|\c
-.B L\c
-\|'.
-
-.PP
-
-.SH ENVIRONMENT
-\c
-.B gld\c
-\& always consults two environment variables: \c
-.B GNUTARGET\c
-\&
-and \c
-.B LDEMULATION\c
-\&.  Depending on the setting of the latter, other
-environment variables may be used as well.
-
-\c
-.B GNUTARGET\c
-\& determines the input-file object format if you don't
-use \c
-.B \-b\c
-\& (or its synonym \c
-.B \-format\c
-\&).  Its value should be one
-of the BFD names for an input format.  If there is no
-\c
-.B GNUTARGET\c
-\& in the environment, \c
-.B gld\c
-\& uses the natural format
-of the host. If \c
-.B GNUTARGET\c
-\& is set to \c
-.B default\c
-\& then BFD attempts to discover the
-input format by examining binary input files; this method often
-succeeds, but there are potential ambiguities, since there is no method
-of ensuring that the magic number used to flag object-file formats is
-unique.  However, the configuration procedure for BFD on each system
-places the conventional format for that system first in the search-list,
-so ambiguities are resolved in favor of convention.
-
-\c
-.B LDEMULATION\c
-\& controls some aspects of \c
-.B gld\c
-\&'s dominant
-personality.  Although \c
-.B gld\c
-\& is flexible enough to permit its use
-in many contexts regardless of configuration, you can use this variable
-to make it act more like one or another older linker by default.
-
-In particular, the value of \c
-.B LDEMULATION\c
-\& controls what default
-linker script is used (thereby controlling the default input and output
-formats; ; what default paths are searched for
-archive libraries; and in some cases whether additional linker script
-commands are available.
-
-Here is the current set of emulations available:
-
-.TP
-.B LDEMULATION=gld
-Emulate the older GNU linker.  When this emulation is selected, the
-default library search paths are
-.sp
-.br
-/lib
-.br
-/usr/lib
-.br
-/usr/local/lib/lib
-.br
-.sp
-
-The default output format is set to \c
-.B a.out-generic-big\c
-\&, and the
-default machine is the system's configured BFD default.
-
-.TP
-.B LDEMULATION=gld68k
-A variant of the \c
-.B gld\c
-\& emulation; only differs in specifically
-setting the default BFD machine as \c
-.B m68k\c
-\&.
-
-.TP
-.B LDEMULATION=gld960
-Emulate the Intel port of the older \c
-.B gld\c
-\& for the i960
-architectures.  The default library search paths are taken from two
-other environment variables, \c
-.B G960LIB\c
-\& and \c
-.B G960BASE\c
-\&.  The
-default architecture is \c
-.B i960\c
-\&.  The default output format is set
-to \c
-.B b.out.big\c
-\&, and in fact the default output file name (if
-\c
-.B \-o\c
-\& is not specified) is \c
-.B b.out\c
-\&, to reflect this variant
-format, for this emulation.
-
-This emulation can behave slightly differently depending on the setting
-of the \c
-.B gld\c
-\& compile-time switch \c
-.B GNU960\c
-\&.  If \c
-.B gld\c
-\& is
-compiled with \c
-.B GNU960\c
-\& defined, then an additional environment
-variable\(em\&\c
-.B GNUTARGET\c
-\&\(em\&is available; its value, if available,
-specifies some other default output format than \c
-.B b.out.big\c
-\&.
-
-.TP
-.B LDEMULATION=gldm88kbcs
-Sets the output format to \c
-.B m88kbcs\c
-\& and the architecture to
-\c
-.B m88k\c
-\&.  Default library search paths are
-.sp
-.br
-/lib
-.br
-/usr/lib
-.br
-/usr/local/lib
-.br
-.sp
-
-.TP
-.B LDEMULATION=lnk960
-Emulate the Intel linker \c
-.B lnk960\c
-\&.  The default output format is
-\c
-.B coff-Intel-big\c
-\&.  With this emulation, \c
-.B gld\c
-\&
-supports the additional script commands \c
-.B HLL\c
-\& and \c
-.B SYSLIB\c
-\& for
-specification of library archives.  This is the only emulation with
-extensive support for the \c
-.B \-A\c
-\& (architecture) command-line option.
-By default, the architecture \c
-.B CORE\c
-\& is assumed, but you can choose
-additional features from the i960 architecture family by using one of
-the following with \c
-.B \-A\c
-\& (or by using the \c
-.B OUTPUT_ARCH\c
-\& command
-from a script):
-.sp
-.br
-CORE
-.br
-KB
-.br
-SB
-.br
-MC
-.br
-XA
-.br
-CA
-.br
-KA
-.br
-SA
-.br
-.sp
-
-The default libraries are chosen with some attention to the architecture
-selected; the core library `\|\c
-.B cg\c
-\|' is always included, but the library
-\c
-.B fpg\c
-\& is also used if you've specified any of the architectures
-\c
-.B KA\c
-\&, \c
-.B SA\c
-\&, or \c
-.B CA\c
-\&.
-
-Like \c
-.B gld960\c
-\&, this emulation uses additional environment variables
-to set the default library search paths.  Also like \c
-.B gld960\c
-\&, the
-behavior of this emulation is slightly different depending on whether
-\c
-.B gld\c
-\& itself was compiled with \c
-.B GNU960\c
-\& defined.
-
-If your \c
-.B gld\c
-\& was compiled with \c
-.B GNU960\c
-\& defined, the default
-paths are taken from all three of \c
-.B G960LIB\c
-\&, \c
-.B G960BASE\c
-\&, and
-\c
-.B I960BASE\c
-\&.  For the first two, paths you supply are automatically
-suffixed with `\|\c
-.B /lib/libcoff\c
-\|'; for the last, your path is
-automatically suffixed with `\|\c
-.B /lib\c
-\|'.
-
-If your \c
-.B gld\c
-\& was \c
-.I not\c
-\& compiled with \c
-.B GNU960\c
-\& defined,
-the default paths are taken from \c
-.B I960BASE\c
-\&, and \c
-.B G960BASE\c
-\& is
-only consulted if \c
-.B I960BASE\c
-\& is undefined.  In this case
-\c
-.B G960LIB\c
-\& is not used at all.
-
-.TP
-.B LDEMULATION=vanilla
-This is the least specific setting for \c
-.B gld\c
-\&.  You can set
-\c
-.B LDEMULATION=vanilla\c
-\& to disable emulation of other linkers.  This
-setting makes \c
-.B gld\c
-\& take the default machine from the BFD
-configuration on your system; \c
-.B a.out-generic-big\c
-\& is the default
-target.  No other defaults are specified.
-
-.PP
-
-.SH "SEE ALSO"
-
-.BR objdump ( 1 )
-.br
-.br
-.RB "`\|" ld "\|' and `\|" binutils "\|'"
-entries in
-.B info\c
-.br
-.I 
-gld: the GNU linker\c
-, Steve Chamberlain and Roland Pesch;
-.I
-The GNU Binary Utilities\c
-, Roland H. Pesch.
-
-.SH COPYING
-Copyright (c) 1991, 1992 Free Software Foundation, Inc.
-.PP
-Permission is granted to make and distribute verbatim copies of
-this manual provided the copyright notice and this permission notice
-are preserved on all copies.
-.PP
-Permission is granted to copy and distribute modified versions of this
-manual under the conditions for verbatim copying, provided that the
-entire resulting derived work is distributed under the terms of a
-permission notice identical to this one.
-.PP
-Permission is granted to copy and distribute translations of this
-manual into another language, under the above conditions for modified
-versions, except that this permission notice may be included in
-translations approved by the Free Software Foundation instead of in
-the original English.
diff --git a/ld/h8300hds.c b/ld/h8300hds.c
deleted file mode 100755 (executable)
index 36ca6ef..0000000
+++ /dev/null
@@ -1,135 +0,0 @@
-/* Copyright (C) 1991 Free Software Foundation, Inc.
-
-This file is part of GLD, the Gnu Linker.
-
-GLD is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 1, or (at your option)
-any later version.
-
-GLD is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with GLD; see the file COPYING.  If not, write to
-the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-/* 
- Written by Steve Chamberlain steve@cygnus.com
-
- The controller which tells the gnu linker how to behave like one for
- the Hitach H8/300 with IEEE records.
-*/
-
-#include "bfd.h"
-#include "sysdep.h"
-
-#include "ld.h"
-#include "config.h"
-#include "ldemul.h"
-#include "ldfile.h"
-#include "ldmisc.h"
-
-extern  boolean lang_float_flag;
-
-
-extern enum bfd_architecture ldfile_output_architecture;
-extern unsigned long ldfile_output_machine;
-extern char *ldfile_output_machine_name;
-
-extern bfd *output_bfd;
-
-
-
-static void h8300hds_before_parse()
-{
-  ldfile_output_architecture = bfd_arch_h8300;
-}
-
-
-static void 
-h8300hds_after_parse()
-{
-
-}
-
-static void
-h8300hds_after_allocation()
-{
-
-}
-
-static void
-h8300hds_before_allocation()
-{
-
-}
-
-
-static void
-h8300hds_set_output_arch()
-{
-  /* Set the output architecture and machine if possible */
-  bfd_set_arch_mach(output_bfd,
-                   ldfile_output_architecture, ldfile_output_machine);
-}
-
-static char *
-h8300hds_choose_target()
-{
-  char *from_outside = getenv(TARGET_ENVIRON);
-  if (from_outside != (char *)NULL)
-    return from_outside;
-  return H8300HDS_TARGET;
-}
-
-static void
-h8300hds_syslib()
-{
-  info("%S SYSLIB ignored\n");
-}
-
-static void
-h8300hds_hll(ignore)
-char  *ignore;
-{
-  info("%S HLL ignored\n");
-}
-
-static char *h8300hds_script =  
-#include "h8300hds.x"
-;
-static char *h8300hds_script_option_Ur  =  
-#include "h8300hds.x"
-;
-static char *h8300hds_script_option_r  =  
-#include "h8300hds.x"
-;
-
-static char *h8300hds_get_script()
-{                           
-  extern ld_config_type config;
-  if (config.relocateable_output == true &&
-      config.build_constructors == true) {
-    return h8300hds_script_option_Ur;
-  }
-  if (config.relocateable_output) {
-    return h8300hds_script_option_r;
-  }
-       
-  return h8300hds_script;
-}
-struct ld_emulation_xfer_struct ld_h8300hds_emulation = 
-{
-  h8300hds_before_parse,
-  h8300hds_syslib,
-  h8300hds_hll,
-  h8300hds_after_parse,
-  h8300hds_after_allocation,
-  h8300hds_set_output_arch,
-  h8300hds_choose_target,
-  h8300hds_before_allocation,
-  h8300hds_get_script,
-};
diff --git a/ld/h8300hds.sc b/ld/h8300hds.sc
deleted file mode 100755 (executable)
index 0527766..0000000
+++ /dev/null
@@ -1,22 +0,0 @@
-OUTPUT_FORMAT("coff-h8300")
-OUTPUT_ARCH(h8300)
-
-SECTIONS                               
-{                                      
-.text 0:
-       {                                       
-         *(.text)                              
-         *(.strings)
-       }
-.data . :
-       {
-       *(.data)
-       }
-.bss . :
-       {                                       
-       *(.bss)                         
-       *(COMMON)                               
-        _end = .;                              
-       }                                       
-}
-
diff --git a/ld/h8300hms.c b/ld/h8300hms.c
deleted file mode 100755 (executable)
index 06e8a89..0000000
+++ /dev/null
@@ -1,135 +0,0 @@
-/* Copyright (C) 1991 Free Software Foundation, Inc.
-
-This file is part of GLD, the Gnu Linker.
-
-GLD is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 1, or (at your option)
-any later version.
-
-GLD is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with GLD; see the file COPYING.  If not, write to
-the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-/* 
- Written by Steve Chamberlain steve@cygnus.com
-
- The controller which tells the gnu linker how to behave like one for
- the Hitach H8/300 with IEEE records.
-*/
-
-#include "bfd.h"
-#include "sysdep.h"
-
-#include "ld.h"
-#include "config.h"
-#include "ldemul.h"
-#include "ldfile.h"
-#include "ldmisc.h"
-
-extern  boolean lang_float_flag;
-
-
-extern enum bfd_architecture ldfile_output_architecture;
-extern unsigned long ldfile_output_machine;
-extern char *ldfile_output_machine_name;
-
-extern bfd *output_bfd;
-
-
-
-static void h8300hms_before_parse()
-{
-  ldfile_output_architecture = bfd_arch_h8300;
-}
-
-
-static void 
-h8300hms_after_parse()
-{
-
-}
-
-static void
-h8300hms_after_allocation()
-{
-
-}
-
-static void
-h8300hms_before_allocation()
-{
-
-}
-
-
-static void
-h8300hms_set_output_arch()
-{
-  /* Set the output architecture and machine if possible */
-  bfd_set_arch_mach(output_bfd,
-                   ldfile_output_architecture, ldfile_output_machine);
-}
-
-static char *
-h8300hms_choose_target()
-{
-  char *from_outside = getenv(TARGET_ENVIRON);
-  if (from_outside != (char *)NULL)
-    return from_outside;
-  return H8300HMS_TARGET;
-}
-
-static void
-h8300hms_syslib()
-{
-  info("%S SYSLIB ignored\n");
-}
-
-static void
-h8300hms_hll(ignore)
-char  *ignore;
-{
-  info("%S HLL ignored\n");
-}
-
-static char *h8300hms_script =  
-#include "h8300hms.x"
-;
-static char *h8300hms_script_option_Ur  =  
-#include "h8300hms.x"
-;
-static char *h8300hms_script_option_r  =  
-#include "h8300hms.x"
-;
-
-static char *h8300hms_get_script()
-{                           
-  extern ld_config_type config;
-  if (config.relocateable_output == true &&
-      config.build_constructors == true) {
-    return h8300hms_script_option_Ur;
-  }
-  if (config.relocateable_output) {
-    return h8300hms_script_option_r;
-  }
-       
-  return h8300hms_script;
-}
-struct ld_emulation_xfer_struct ld_h8300hms_emulation = 
-{
-  h8300hms_before_parse,
-  h8300hms_syslib,
-  h8300hms_hll,
-  h8300hms_after_parse,
-  h8300hms_after_allocation,
-  h8300hms_set_output_arch,
-  h8300hms_choose_target,
-  h8300hms_before_allocation,
-  h8300hms_get_script,
-};
diff --git a/ld/h8300hms.sc b/ld/h8300hms.sc
deleted file mode 100755 (executable)
index 62ba07e..0000000
+++ /dev/null
@@ -1,30 +0,0 @@
-OUTPUT_FORMAT("coff-h8300")
-OUTPUT_ARCH(h8300)
-
-MEMORY {
-       rom   : o = 0x0000, l = 0x7fe0 
-       duart : o = 0x7fe0, l = 16
-       ram   : o = 0x8000, l = 29k
-       hmsram: o = 0xfb80, l = 512
-       }
-
-SECTIONS                               
-{                                      
-.text :
-       {                                       
-         *(.text)                              
-         *(.strings)
-       } > ram
-.data  :
-       {
-       *(.data)
-       } > ram
-.bss  :
-       {
-       _bss_start = . ;                                         
-       *(.bss)                         
-       *(COMMON)                               
-        _end = .;                      
-       } >ram                  
-}
-
diff --git a/ld/i386aout.c b/ld/i386aout.c
deleted file mode 100755 (executable)
index 7bd06c5..0000000
+++ /dev/null
@@ -1,159 +0,0 @@
-/* NOTE: If there are angle brackets here: I386AOUT then this is a
- * template file (ldtemplate), intended for processing by sed.
- * Otherwise, this file has already been processed by sed,
- * and customized for a particular emulation target.
- * In that DO NOT EDIT the file; edit ldtemplate instead.
- */
-
-/* emulate the original gld for the given I386AOUT
-   Copyright (C) 1991 Free Software Foundation, Inc.
-   Written by Steve Chamberlain steve@cygnus.com
-
-This file is part of GLD, the Gnu Linker.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-/*
- *  $Id:#
- */
-
-#define TARGET_IS_I386AOUT
-
-
-#include "bfd.h"
-#include "sysdep.h"
-#include "ld.h"
-#include "config.h"
-#include "ldemul.h"
-#include "ldfile.h"
-#include "ldmisc.h"
-
-extern  boolean lang_float_flag;
-
-
-extern enum bfd_architecture ldfile_output_architecture;
-extern unsigned long ldfile_output_machine;
-extern char *ldfile_output_machine_name;
-
-extern bfd *output_bfd;
-
-
-
-static void gldi386aout_before_parse()
-{
-#ifdef TARGET_IS_M88KBCS
-  extern char lprefix;
-  lprefix = '@';
-#else
-#ifndef TARGET_ /* I.e., if not generic */
-  ldfile_output_architecture = bfd_arch_i386;
-#endif
-#endif
-}
-
-
-static void 
-gldi386aout_after_parse()
-{
-
-}
-
-static void
-gldi386aout_after_allocation()
-{
-
-}
-
-static void
-gldi386aout_before_allocation()
-{
-
-}
-
-
-static void
-gldi386aout_set_output_arch()
-{
-  /* Set the output architecture and machine if possible */
-  bfd_set_arch_mach(output_bfd,
-                   ldfile_output_architecture, ldfile_output_machine);
-}
-
-static char *
-gldi386aout_choose_target()
-{
-  char *from_outside = getenv(TARGET_ENVIRON);
-  if (from_outside != (char *)NULL)
-    return from_outside;
-  return GLDI386AOUT_TARGET;
-}
-
-static void
-gldi386aout_syslib()
-{
-  info("%S SYSLIB ignored\n");
-}
-
-static void
-gldi386aout_hll(ignore)
-char  *ignore;
-{
-  info("%S HLL ignored\n");
-}
-
-static char *gldi386aout_script =  
-#include "i386aout.x"
-;
-static char *gldi386aout_script_option_Ur  =  
-#include "i386aout.xu"
-;
-static char *gldi386aout_script_option_r  =  
-#include "i386aout.xr"
-;
-static char *gldi386aout_script_option_n  =  /* Used with -n flag. */
-#include "i386aout.xn"
-;
-static char *gldi386aout_script_option_N  =  /* Used with -N flag. */
-#include "i386aout.xN"
-;
-
-static char *gldi386aout_get_script()
-{                           
-  extern ld_config_type config;
-  if (config.relocateable_output == true &&
-      config.build_constructors == true) {
-    return gldi386aout_script_option_Ur;
-  }
-  if (config.relocateable_output == true) {
-    return gldi386aout_script_option_r;
-  }
-  if (!config.text_read_only)
-    return gldi386aout_script_option_N;
-  if (!config.magic_demand_paged)
-    return gldi386aout_script_option_n;
-  return gldi386aout_script;
-}
-struct ld_emulation_xfer_struct ld_gldi386aout_emulation = 
-{
-  gldi386aout_before_parse,
-  gldi386aout_syslib,
-  gldi386aout_hll,
-  gldi386aout_after_parse,
-  gldi386aout_after_allocation,
-  gldi386aout_set_output_arch,
-  gldi386aout_choose_target,
-  gldi386aout_before_allocation,
-  gldi386aout_get_script,
-};
diff --git a/ld/i386aout.sc b/ld/i386aout.sc
deleted file mode 100755 (executable)
index 9ea8e64..0000000
+++ /dev/null
@@ -1,25 +0,0 @@
-OUTPUT_FORMAT("a.out-i386")
-OUTPUT_ARCH(i386)
-
-__DYNAMIC  =  0;
-SECTIONS
-{
-  .text 0 BLOCK(0x1000) :
-  {
-    CREATE_OBJECT_SYMBOLS
-    *(.text)
-    _etext  =  ALIGN(0x1000);
-    }
-  .data ALIGN(0x1000) :
-  {
-    *(.data)
-    CONSTRUCTORS
-    _edata  =  .;
-  }
-  .bss SIZEOF(.data) + ADDR(.data) :
-  {
-    *(.bss)
-    *(COMMON)
-    _end = .;
-  }
-}
diff --git a/ld/ld-emul.c b/ld/ld-emul.c
deleted file mode 100755 (executable)
index ce99ce7..0000000
+++ /dev/null
@@ -1,135 +0,0 @@
-/* Copyright (C) 1991 Free Software Foundation, Inc.
-
-This file is part of GLD, the Gnu Linker.
-
-GLD is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 1, or (at your option)
-any later version.
-
-GLD is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with GLD; see the file COPYING.  If not, write to
-the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-/*
- * $Id$ 
- */
-
-/*
- * clearing house for ld emulation states 
- */
-
-#include "sysdep.h"
-#include "bfd.h"
-
-#include "config.h"
-#include "ld.h"
-#include "ld-emul.h"
-#include "ldmisc.h"
-
-extern ld_emulation_xfer_type ld_lnk960_emulation;
-extern ld_emulation_xfer_type ld_gldm88kbcs_emulation;
-extern ld_emulation_xfer_type ld_gld_emulation;
-extern ld_emulation_xfer_type ld_vanilla_emulation;
-extern ld_emulation_xfer_type ld_gld68k_emulation;
-extern ld_emulation_xfer_type ld_gld960_emulation;
-
-
-
-ld_emulation_xfer_type *ld_emulation;
-
-void
-ldemul_hll(name)
-char *name;
-{
-  ld_emulation->hll(name);
-}
-
-
-void ldemul_syslib(name)
-char *name;
-{
-  ld_emulation->syslib(name);
-}
-
-void
-ldemul_after_parse()
-{
-  ld_emulation->after_parse();
-}
-
-void
-ldemul_before_parse()
-{
-  ld_emulation->before_parse();
-}
-
-void 
-ldemul_after_allocation()
-{
-  ld_emulation->after_allocation();
-}
-
-void 
-ldemul_before_allocation()
-{
-  if (ld_emulation->before_allocation) {
-    ld_emulation->before_allocation();
-  }
-}
-
-
-void
-ldemul_set_output_arch()
-{
-  ld_emulation->set_output_arch();
-}
-
-char *
-ldemul_choose_target()
-{
-  return ld_emulation->choose_target();
-}
-
-char *
-ldemul_get_script()
-{
-  return ld_emulation->get_script();
-}
-
-void
-ldemul_choose_mode(target)
-char *target;
-{
-  if (strcmp(target,LNK960_EMULATION_NAME)==0) {
-    ld_emulation = &ld_lnk960_emulation;
-  }
-  else if (strcmp(target,GLD960_EMULATION_NAME)==0) {
-    ld_emulation = &ld_gld960_emulation;
-  }
-else if (strcmp(target,GLDM88KBCS_EMULATION_NAME)==0) {
-  ld_emulation = &ld_gldm88kbcs_emulation;
-}
-#ifndef GNU960
-  else if (strcmp(target,GLD_EMULATION_NAME)==0) {
-    ld_emulation = &ld_gld_emulation;
-  }
-  else if (strcmp(target,VANILLA_EMULATION_NAME)==0) {
-    ld_emulation = &ld_vanilla_emulation;
-  }
-  else if (strcmp(target,GLD68K_EMULATION_NAME)==0) {
-    ld_emulation = &ld_gld68k_emulation;
-  }
-#endif
-  else {
-    info("%P%F unrecognised emulation mode: %s\n",target);
-  }
-}
-
-
-
diff --git a/ld/ld-gld-Ur.script b/ld/ld-gld-Ur.script
deleted file mode 100755 (executable)
index 3871454..0000000
+++ /dev/null
@@ -1,31 +0,0 @@
-
-SEARCH_DIR(/lib)                       
-SEARCH_DIR(/usr/lib)                   
-SEARCH_DIR(/usr/local/lib)             
-SECTIONS                               
-{                                      
-  .text 0:                             
-  {                                    
-   CREATE_OBJECT_SYMBOLS                
-    *(.text)                           
-    }                                  
-  .data SIZEOF(.text) + ADDR(.text) :  
-  {                                    
-    *(.data)                           
-    ___DTOR_LIST__ = . ;                       
-    LONG((___CTOR_LIST__ - .) / 4 -2)          
-    *(___DTOR_LIST__)                   
-    LONG(0)                             
-    ___CTOR_LIST__ = . ;                       
-    LONG((___end_list__  - .) / 4 -2)     
-    *(___CTOR_LIST__)                   
-    LONG(0)                             
-    ___end_list__  =  . ;                      
-    }                                  
-  .bss SIZEOF(.data) + ADDR(.data) :   
-  {                                    
-    *(.bss)                            
-   [COMMON]                            
-    }                                  
-}                                      
-
diff --git a/ld/ld-gld-r.script b/ld/ld-gld-r.script
deleted file mode 100755 (executable)
index a3b39fe..0000000
+++ /dev/null
@@ -1,20 +0,0 @@
-SEARCH_DIR(/lib)                       
-SEARCH_DIR(/usr/lib)                   
-SEARCH_DIR(/usr/local/lib)             
-SECTIONS                               
-{                                      
-  .text 0:                             
-  {                                    
-   CREATE_OBJECT_SYMBOLS                
-    *(.text)                           
-    }                                  
-  .data SIZEOF(.text) + ADDR(.text) :  
-  {                                    
-    *(.data)                           
-    }                                  
-  .bss SIZEOF(.data) + ADDR(.data) :   
-  {                                    
-    *(.bss)                            
-   [COMMON]                            
-    }                                  
-}                                      
diff --git a/ld/ld-gld.c b/ld/ld-gld.c
deleted file mode 100755 (executable)
index 018d8d1..0000000
+++ /dev/null
@@ -1,145 +0,0 @@
-/* Copyright (C) 1991 Free Software Foundation, Inc.
-
-This file is part of GLD, the Gnu Linker.
-
-GLD is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 1, or (at your option)
-any later version.
-
-GLD is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with GLD; see the file COPYING.  If not, write to
-the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-/*
- *  $Id$ 
- *
-*/
-
-/* 
- * emulate the original gld
- *
- *  Written by Steve Chamberlain steve@cygnus.com
- */
-
-
-#include "sysdep.h"
-#include "bfd.h"
-
-
-#include "ld.h"
-#include "config.h"
-#include "ld-emul.h"
-#include "ldfile.h"
-#include "ldmisc.h"
-
-extern  boolean lang_float_flag;
-
-
-extern enum bfd_architecture ldfile_output_architecture;
-extern unsigned long ldfile_output_machine;
-extern char *ldfile_output_machine_name;
-
-extern bfd *output_bfd;
-
-
-
-static void gld_before_parse()
-{
-  ldfile_add_library_path("/lib");
-  ldfile_add_library_path("/usr/lib");
-  ldfile_add_library_path("/usr/local/lib/lib");
-}
-
-
-static void 
-gld_after_parse()
-{
-
-}
-
-static void
-gld_after_allocation()
-{
-
-}
-
-static void
-gld_before_allocation()
-{
-
-}
-
-
-static void
-gld_set_output_arch()
-{
-  /* Set the output architecture and machine if possible */
-  bfd_set_arch_mach(output_bfd, ldfile_output_architecture, ldfile_output_machine);
-}
-
-static char *
-gld_choose_target()
-{
-  char *from_outside = getenv(TARGET_ENVIRON);
-  if (from_outside != (char *)NULL)
-    return from_outside;
-  return GLD_TARGET;
-}
-
-static void
-gld_syslib()
-{
-  info("%S SYSLIB ignored\n");
-}
-
-static void
-gld_hll(ignore)
-char  *ignore;
-{
-  info("%S HLL ignored\n");
-}
-
-static char *gld_script = 
-#include "ld-gld.x"
-;
-
-static char *gld_script_option_Ur  =  
-#include "ld-gld-Ur.x"
-;
-
-static char *gld_script_option_r  =  
-#include "ld-gld-r.x"
-;           
-                            
-static char *gld_get_script()
-{                           
-  extern ld_config_type config;
-  if (config.relocateable_output == true &&
-      config.build_constructors == true) {
-    return gld_script_option_Ur;
-  }
-  if (config.relocateable_output) {
-    return gld_script_option_r;
-  }
-       
-  return gld_script;
-}
-struct ld_emulation_xfer_struct ld_gld_emulation = 
-{
-  gld_before_parse,
-  gld_syslib,
-  gld_hll,
-  gld_after_parse,
-  gld_after_allocation,
-  gld_set_output_arch,
-  gld_choose_target,
-  gld_before_allocation,
-  gld_get_script,
-};
-
diff --git a/ld/ld-gld.script b/ld/ld-gld.script
deleted file mode 100755 (executable)
index 2f402c1..0000000
+++ /dev/null
@@ -1,28 +0,0 @@
-OUTPUT_ARCH(sparc)
-OUTPUT_FORMAT("a.out-sunos-big")
-SEARCH_DIR(/lib)                       
-SEARCH_DIR(/usr/lib)                   
-SEARCH_DIR(/usr/local/lib)             
-__DYNAMIC = 0;                                 
-SECTIONS                               
-{                                      
-  .text 0x2020 BLOCK(0x2000):          
-  {                                    
-   CREATE_OBJECT_SYMBOLS               
-    *(.text)                           
-    _etext = ALIGN( 0x2000);           
-    }                                          
-  .data  ALIGN(0x2000)  :              
-  {                                    
-    *(.data)                           
-      _edata  =  .;                    
-  }                                    
-  .bss   SIZEOF(.data) + ADDR(.data) : 
-  {                                    
-   *(.bss)                             
-   [COMMON]                            
-     _end = .;                         
-    }                                  
-}
-
-
diff --git a/ld/ld-gld68k-Ur.script b/ld/ld-gld68k-Ur.script
deleted file mode 100755 (executable)
index aa89c6a..0000000
+++ /dev/null
@@ -1,21 +0,0 @@
-SEARCH_DIR(/lib)                       
-SEARCH_DIR(/usr/lib)                   
-SEARCH_DIR(/usr/local/lib)             
-SECTIONS                               
-{                                      
-  .text 0:                             
-    {                                  
-      CREATE_OBJECT_SYMBOLS                
-       *(.text)                                
-       }                                       
-  .data SIZEOF(.text) + ADDR(.text) :  
-    {                                  
-      *(.data)                                 
-    }                                  
-  .bss SIZEOF(.data) + ADDR(.data) :   
-    {                                  
-      *(.bss)                          
-       [COMMON]                                
-       }                                       
-}                                      
-
diff --git a/ld/ld-gld68k-r.script b/ld/ld-gld68k-r.script
deleted file mode 100755 (executable)
index 8cbc9dc..0000000
+++ /dev/null
@@ -1,22 +0,0 @@
-
-SEARCH_DIR(/lib)                       
-SEARCH_DIR(/usr/lib)                   
-SEARCH_DIR(/usr/local/lib)             
-SECTIONS                               
-{                                      
- .text 0:                              
- {                                     
- CREATE_OBJECT_SYMBOLS    
- *(.text)                              
- }                                     
- .data SIZEOF(.text) + ADDR(.text) :   
- {                                     
- *(.data)                              
- }                                     
- .bss SIZEOF(.data) + ADDR(.data) :    
- {                                     
- *(.bss)                               
- [COMMON]                              
- }                                     
-}                                      
-
diff --git a/ld/ld-gld68k.c b/ld/ld-gld68k.c
deleted file mode 100755 (executable)
index 5d996e3..0000000
+++ /dev/null
@@ -1,143 +0,0 @@
-/* Copyright (C) 1991 Free Software Foundation, Inc.
-
-This file is part of GLD, the Gnu Linker.
-
-GLD is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 1, or (at your option)
-any later version.
-
-GLD is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with GLD; see the file COPYING.  If not, write to
-the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-/*
- *  $Id:#
-*/
-
-/* 
- * emulate the original gld running on a 68k system
- *
- *  Written by Steve Chamberlain steve@cygnus.com
- */
-
-
-#include "sysdep.h"
-#include "bfd.h"
-
-#include "ld.h"
-#include "config.h"
-#include "ld-emul.h"
-#include "ldfile.h"
-#include "ldmisc.h"
-
-extern  boolean lang_float_flag;
-
-
-extern enum bfd_architecture ldfile_output_architecture;
-extern unsigned long ldfile_output_machine;
-extern char *ldfile_output_machine_name;
-
-extern bfd *output_bfd;
-
-
-
-static void gld68k_before_parse()
-{
-  ldfile_add_library_path("/lib");
-  ldfile_add_library_path("/usr/lib");
-  ldfile_add_library_path("/usr/local/lib/lib");
-  ldfile_output_architecture = bfd_arch_m68k;
-}
-
-
-static void 
-gld68k_after_parse()
-{
-
-}
-
-static void
-gld68k_after_allocation()
-{
-
-}
-
-static void
-gld68k_before_allocation()
-{
-
-}
-
-
-static void
-gld68k_set_output_arch()
-{
-  /* Set the output architecture and machine if possible */
-  unsigned long  machine = 0;
-  bfd_set_arch_mach(output_bfd, ldfile_output_architecture, machine);
-}
-
-static char *
-gld68k_choose_target()
-{
-  char *from_outside = getenv(TARGET_ENVIRON);
-  if (from_outside != (char *)NULL)
-    return from_outside;
-  return GLD68K_TARGET;
-}
-
-static void
-gld68k_syslib()
-{
-  info("%S SYSLIB ignored\n");
-}
-
-static void
-gld68k_hll(ignore)
-char  *ignore;
-{
-  info("%S HLL ignored\n");
-}
-
-static char *gld68k_script  =  
-#include "ld-gld68k.x"
-;
-
-static char *gld68k_script_option_Ur  =  
-#include "ld-gld68k-Ur.x"
-;
-static char *gld68k_script_option_r  =  
-#include "ld-gld68k-r.x"
-;                           
-static char *gld68k_get_script()
-{                           
-  extern ld_config_type config;
-  if (config.relocateable_output == true &&
-      config.build_constructors == true) {
-    return gld68k_script_option_Ur;
-  }
-  if (config.relocateable_output) {
-    return gld68k_script_option_r;
-  }
-       
-  return gld68k_script;
-}
-struct ld_emulation_xfer_struct ld_gld68k_emulation = 
-{
-  gld68k_before_parse,
-  gld68k_syslib,
-  gld68k_hll,
-  gld68k_after_parse,
-  gld68k_after_allocation,
-  gld68k_set_output_arch,
-  gld68k_choose_target,
-  gld68k_before_allocation,
-  gld68k_get_script,
-};
-
diff --git a/ld/ld-gld68k.script b/ld/ld-gld68k.script
deleted file mode 100755 (executable)
index be91d91..0000000
+++ /dev/null
@@ -1,28 +0,0 @@
-OUTPUT_FORMAT("a.out-sunos-big")
-OUTPUT_ARCH(m68k)
-
-SEARCH_DIR(/lib)                       
-SEARCH_DIR(/usr/lib)                   
-SEARCH_DIR(/usr/local/lib)             
-__DYNAMIC  =  0;                               
-SECTIONS                               
-{                                      
-  .text 0x2020 BLOCK(0x2000):          
-  {                                    
-   CREATE_OBJECT_SYMBOLS               
-    *(.text)                           
-    _etext  =  ALIGN( 0x2000);         
-    }                                          
-  .data  ALIGN(0x20000)  :             
-  {                                    
-    *(.data)                           
-      _edata  =  .;                    
-  }                                    
-  .bss   SIZEOF(.data) + ADDR(.data) : 
-  {                                    
-   *(.bss)                             
-   [COMMON]                            
-     _end = .;                         
-    }                                  
-}
-
diff --git a/ld/ld-gld960.c b/ld/ld-gld960.c
deleted file mode 100755 (executable)
index 5aed97e..0000000
+++ /dev/null
@@ -1,171 +0,0 @@
-/* Copyright (C) 1991 Free Software Foundation, Inc.
-
-This file is part of GLD, the Gnu Linker.
-
-GLD is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 1, or (at your option)
-any later version.
-
-GLD is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with GLD; see the file COPYING.  If not, write to
-the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-/*
-   $Id$ 
-*/
-
-/* 
- * emulate the Intels port of  gld
- */
-
-
-#include "sysdep.h"
-#include "bfd.h"
-
-
-#include "ld.h"
-#include "config.h"
-#include "ld-emul.h"
-#include "ldfile.h"
-#include "ldmisc.h"
-
-
-/* IMPORTS */
-extern char *output_filename;
-extern  boolean lang_float_flag;
-
-
-extern enum bfd_architecture ldfile_output_architecture;
-extern unsigned long ldfile_output_machine;
-extern char *ldfile_output_machine_name;
-
-extern bfd *output_bfd;
-
-
-
-#ifdef GNU960
-
-static void
-gld960_before_parse()
-{
-  static char *env_variables[] = { "G960LIB", "G960BASE", 0 };
-  char **p;
-  char *env ;
-
-  for ( p = env_variables; *p; p++ ){
-    env =  (char *) getenv(*p);
-    if (env) {
-      ldfile_add_library_path(concat(env,"/lib/libbout",""));
-    }
-  }
-  ldfile_output_architecture = bfd_arch_i960;
-}
-
-#else  /* not GNU960 */
-
-static void gld960_before_parse()
-{
-  char *env ;
-  env =  getenv("G960LIB");
-  if (env) {
-    ldfile_add_library_path(env);
-  }
-  env = getenv("G960BASE");
-  if (env) {
-    ldfile_add_library_path(concat(env,"/lib",""));
-  }
-  ldfile_output_architecture = bfd_arch_i960;
-}
-
-#endif /* GNU960 */
-
-
-static void 
-gld960_after_parse()
-{
-
-}
-
-static void
-gld960_after_allocation()
-{
-
-}
-
-static void
-gld960_before_allocation()
-{
-
-}
-
-
-static void
-gld960_set_output_arch()
-{
-  /* Set the output architecture and machine if possible */
-  unsigned long  machine = 0;
-  bfd_set_arch_mach(output_bfd, ldfile_output_architecture, machine);
-}
-
-static char *
-gld960_choose_target()
-{
-#ifdef GNU960
-
-  output_filename = "b.out";
-  return bfd_make_targ_name(BFD_BOUT_FORMAT,HOST_BYTE_ORDER_BIG_P);
-
-#else
-
-  char *from_outside = getenv(TARGET_ENVIRON);
-  output_filename = "b.out";
-
-  if (from_outside != (char *)NULL)
-    return from_outside;
-  return GLD960_TARGET;
-
-#endif
-}
-
-static void
-gld960_syslib()
-{
-  info("%S SYSLIB ignored\n");
-}
-
-static void
-gld960_hll()
-{
-  info("%S HLL ignored\n");
-}
-
-
-static char *script = 
-#include "ld-gld960.x"
-;
-
-
-static char *
-gld960_get_script()
-{
-return script;
-}
-
-struct ld_emulation_xfer_struct ld_gld960_emulation = 
-{
-  gld960_before_parse,
-  gld960_syslib,
-  gld960_hll,
-  gld960_after_parse,
-  gld960_after_allocation,
-  gld960_set_output_arch,
-  gld960_choose_target,
-  gld960_before_allocation,
-  gld960_get_script,
-};
diff --git a/ld/ld-gld960.script b/ld/ld-gld960.script
deleted file mode 100755 (executable)
index 1c40a73..0000000
+++ /dev/null
@@ -1,23 +0,0 @@
-SECTIONS 
-{ 
-  .text : 
-  { 
-   CREATE_OBJECT_SYMBOLS 
-    *(.text) 
-      _etext = .;
-    }  
-  .data  SIZEOF(.text) + ADDR(.text):
-  { 
-    *(.data) 
-      _edata = .; 
-    }  
-  .bss   SIZEOF(.data) + ADDR(.data) :    
-  { 
-       _bss_start = .;
-       *(.bss)  
-       [COMMON] 
-       _end = . ; 
-   } 
-} 
diff --git a/ld/ld-gldm88kbcs-Ur.script b/ld/ld-gldm88kbcs-Ur.script
deleted file mode 100755 (executable)
index 8d3f12b..0000000
+++ /dev/null
@@ -1,31 +0,0 @@
-SCRIPT 
-SEARCH_DIR(/lib)                       
-SEARCH_DIR(/usr/lib)                   
-SEARCH_DIR(/usr/local/lib)             
-SECTIONS                               
-{                                      
-  .text 0:                             
-  {                                    
-   CREATE_OBJECT_SYMBOLS                
-    *(.text)                           
-    }                                  
-  .data SIZEOF(.text) + ADDR(.text) :  
-  {                                    
-    *(.data)                           
-    ___DTOR_LIST__ = . ;                       
-    LONG((___CTOR_LIST__ - .) / 4 -2)          
-    *(___DTOR_LIST__)                   
-    LONG(0)                             
-    ___CTOR_LIST__ = . ;                       
-    LONG((___end_list__  - .) / 4 -2)     
-    *(___CTOR_LIST__)                   
-    LONG(0)                             
-    ___end_list__  =  . ;                      
-    }                                  
-  .bss SIZEOF(.data) + ADDR(.data) :   
-  {                                    
-    *(.bss)                            
-   [COMMON]                            
-    }                                  
-}                                      
-ENDSCRIPT 
diff --git a/ld/ld-gldm88kbcs-r.script b/ld/ld-gldm88kbcs-r.script
deleted file mode 100755 (executable)
index a3b39fe..0000000
+++ /dev/null
@@ -1,20 +0,0 @@
-SEARCH_DIR(/lib)                       
-SEARCH_DIR(/usr/lib)                   
-SEARCH_DIR(/usr/local/lib)             
-SECTIONS                               
-{                                      
-  .text 0:                             
-  {                                    
-   CREATE_OBJECT_SYMBOLS                
-    *(.text)                           
-    }                                  
-  .data SIZEOF(.text) + ADDR(.text) :  
-  {                                    
-    *(.data)                           
-    }                                  
-  .bss SIZEOF(.data) + ADDR(.data) :   
-  {                                    
-    *(.bss)                            
-   [COMMON]                            
-    }                                  
-}                                      
diff --git a/ld/ld-gldm88kbcs.c b/ld/ld-gldm88kbcs.c
deleted file mode 100755 (executable)
index bfb539f..0000000
+++ /dev/null
@@ -1,141 +0,0 @@
-/* Copyright (C) 1991 Free Software Foundation, Inc.
-
-This file is part of GLD, the Gnu Linker.
-
-GLD is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 1, or (at your option)
-any later version.
-
-GLD is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with GLD; see the file COPYING.  If not, write to
-the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-/*
- *  $Id$
- *
-*/
-
-/* 
- *  Written by Steve Chamberlain steve@cygnus.com
- */
-
-
-#include "sysdep.h"
-#include "bfd.h"
-
-
-#include "ld.h"
-#include "config.h"
-#include "ld-emul.h"
-#include "ldfile.h"
-#include "ldmisc.h"
-
-extern  boolean lang_float_flag;
-
-
-extern enum bfd_architecture ldfile_output_architecture;
-extern unsigned long ldfile_output_machine;
-extern char *ldfile_output_machine_name;
-
-extern bfd *output_bfd;
-
-
-
-static void gldm88kbcs_before_parse()
-{
-
-}
-
-
-static void 
-gldm88kbcs_after_parse()
-{
-
-}
-
-static void
-gldm88kbcs_after_allocation()
-{
-
-}
-
-static void
-gldm88kbcs_before_allocation()
-{
-
-}
-
-
-static void
-gldm88kbcs_set_output_arch()
-{
-  /* Set the output architecture and machine if possible */
-  bfd_set_arch_mach(output_bfd, ldfile_output_architecture, ldfile_output_machine);
-}
-
-static char *
-gldm88kbcs_choose_target()
-{
-  char *from_outside = getenv(TARGET_ENVIRON);
-  if (from_outside != (char *)NULL)
-    return from_outside;
-  return GLDM88KBCS_TARGET;
-}
-
-static void
-gldm88kbcs_syslib()
-{
-  info("%S SYSLIB ignored\n");
-}
-
-static void
-gldm88kbcs_hll(ignore)
-char  *ignore;
-{
-  info("%S HLL ignored\n");
-}
-
-static char *gldm88kbcs_script = 
-#include "ld-gldm88kbcs.x"
-;
-
-static char *gldm88kbcs_script_option_Ur  =  
-#include "ld-gldm88kbcs-Ur.x"
-;
-
-static char *gldm88kbcs_script_option_r  =  
-#include "ld-gldm88kbcs-r.x"
-;           
-                            
-static char *gldm88kbcs_get_script()
-{                           
-  extern ld_config_type config;
-  if (config.relocateable_output == true &&
-      config.build_constructors == true) {
-    return gldm88kbcs_script_option_Ur;
-  }
-  if (config.relocateable_output) {
-    return gldm88kbcs_script_option_r;
-  }
-       
-  return gldm88kbcs_script;
-}
-struct ld_emulation_xfer_struct ld_gldm88kbcs_emulation = 
-{
-  gldm88kbcs_before_parse,
-  gldm88kbcs_syslib,
-  gldm88kbcs_hll,
-  gldm88kbcs_after_parse,
-  gldm88kbcs_after_allocation,
-  gldm88kbcs_set_output_arch,
-  gldm88kbcs_choose_target,
-  gldm88kbcs_before_allocation,
-  gldm88kbcs_get_script,
-};
-
diff --git a/ld/ld-gldm88kbcs.script b/ld/ld-gldm88kbcs.script
deleted file mode 100755 (executable)
index ae7cb85..0000000
+++ /dev/null
@@ -1,36 +0,0 @@
-OUTPUT_FORMAT(m88kbcs)
-OUTPUT_ARCH(m88k)
-SEARCH_DIR(/lib)                       
-SEARCH_DIR(/usr/lib)                   
-SEARCH_DIR(/usr/local/lib)             
-__DYNAMIC = 0;                                 
-SECTIONS                               
-{                                      
-  .text 0x2020 BLOCK(0x2000):          
-  {                                    
-   CREATE_OBJECT_SYMBOLS               
-    *(.text)                           
-    _etext = ALIGN( 0x2000);           
-    }                                          
-  .data  ALIGN(0x2000)  :              
-  {                                    
-    *(.data)                           
-    ___DTOR_LIST__ = . ;                       
-    LONG((___CTOR_LIST__ - .) / 4 -2)          
-    *(___DTOR_LIST__)                   
-    LONG(0)                             
-    ___CTOR_LIST__ = . ;                       
-    LONG((_edata  - .) / 4 -2)            
-    *(___CTOR_LIST__)                   
-    LONG(0)                             
-      _edata  =  .;                    
-  }                                    
-  .bss   SIZEOF(.data) + ADDR(.data) : 
-  {                                    
-   *(.bss)                             
-   [COMMON]                            
-     _end = .;                         
-    }                                  
-}
-
-
diff --git a/ld/ld-lnk960-r.script b/ld/ld-lnk960-r.script
deleted file mode 100755 (executable)
index daf59bb..0000000
+++ /dev/null
@@ -1,17 +0,0 @@
-SECTIONS 
-{ 
-  .text 0:
-  { 
-    *(.text) 
-    }  
-  .data SIZEOF(.text) + ADDR(.text):
-  { 
-    *(.data) 
-    }  
-  .bss   SIZEOF(.data) + ADDR(.data) :    
-  { 
-   *(.bss)  
-   [COMMON] 
-    } 
-} 
-
diff --git a/ld/ld-lnk960.c b/ld/ld-lnk960.c
deleted file mode 100755 (executable)
index 984ed2e..0000000
+++ /dev/null
@@ -1,288 +0,0 @@
-/* Copyright (C) 1991 Free Software Foundation, Inc.
-
-This file is part of GLD, the Gnu Linker.
-
-GLD is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 1, or (at your option)
-any later version.
-
-GLD is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with GLD; see the file COPYING.  If not, write to
-the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-/*
-   $Id$ 
-*/
-
-/* 
-
-   Written by Steve Chamberlain steve@cygnus.com
-
- * intel coff loader emulation specific stuff
- */
-
-#include "sysdep.h"
-#include "bfd.h"
-
-/*#include "archures.h"*/
-#include "ld.h"
-#include "config.h"
-#include "ld-emul.h"
-#include "ldmisc.h"
-#include "ldlang.h"
-#include "ldfile.h"
-
-extern  boolean lang_float_flag;
-extern bfd *output_bfd;
-
-
-
-extern enum bfd_architecture ldfile_output_architecture;
-extern unsigned long ldfile_output_machine;
-extern char *ldfile_output_machine_name;
-
-
-typedef struct lib_list {
-  char *name;
-  struct lib_list *next;
-} lib_list_type;
-
-static lib_list_type *hll_list;
-static lib_list_type **hll_list_tail = &hll_list;
-
-static lib_list_type *syslib_list;
-static lib_list_type **syslib_list_tail = &syslib_list;
-
-
-static void
-append(list, name)
-lib_list_type ***list;
-char *name;
-{
-  lib_list_type *element = 
-    (lib_list_type *)(ldmalloc(sizeof(lib_list_type)));
-
-  element->name = name;
-  element->next = (lib_list_type *)NULL;
-  **list = element;
-  *list = &element->next;
-
-}
-
-static boolean had_hll = false;
-static boolean had_hll_name = false;
-static void
-lnk960_hll(name)
-char *name;
-{
-  had_hll = true;
-  if (name != (char *)NULL) {
-    had_hll_name = true;
-    append(&hll_list_tail, name);
-  }
-}
-
-static void 
-lnk960_syslib(name)
-char *name;
-{
-  append(&syslib_list_tail,name);
-}
-
-
-
-#ifdef GNU960
-
-static void 
-lnk960_before_parse()
-{
-  static char *env_variables[] = { "G960LIB", "G960BASE", 0 };
-  char **p;
-  char *env ;
-
-  for ( p = env_variables; *p; p++ ){
-    env =  (char *) getenv(*p);
-    if (env) {
-      ldfile_add_library_path(concat(env,"/lib/libcoff",""));
-    }
-  }
-
-  env= (char *) getenv("I960BASE");
-  if ( env ) {
-    ldfile_add_library_path(concat(env,"/lib",""));
-  }
-
-  ldfile_output_architecture = bfd_arch_i960;
-  ldfile_output_machine = bfd_mach_i960_core;
-}
-
-#else  /* not GNU960 */
-
-static void 
-lnk960_before_parse()
-{
-  char *name = getenv("I960BASE");
-
-  if (name == (char *)NULL) {
-    name = getenv("G960BASE");
-    if (name == (char *)NULL) {
-      info("%P%F I960BASE and G960BASE not set\n");
-    }
-  }
-
-
-  ldfile_add_library_path(concat(name,"/lib",""));
-  ldfile_output_architecture = bfd_arch_i960;
-  ldfile_output_machine = bfd_mach_i960_core;
-}
-
-#endif /* GNU960 */
-
-
-static void
-add_on(list, search)
-lib_list_type *list;
-lang_input_file_enum_type search;
-{
-  while (list) {
-    lang_add_input_file(list->name,
-                       search,
-                       (char *)NULL);
-    list = list->next;
-  }
-}
-static void lnk960_after_parse()
-{
-
-  /* If there has been no arch, default to -KB */
-  if (ldfile_output_machine_name[0] ==0) {
-    ldfile_add_arch("KB");
-  }
-
-  /* if there has been no hll list then add our own */
-  
-  if(had_hll && !had_hll_name) {
-    append(&hll_list_tail,"cg");
-    if (ldfile_output_machine == bfd_mach_i960_ka_sa ||
-       ldfile_output_machine == bfd_mach_i960_ca) {
-        {
-         append(&hll_list_tail,"fpg");
-        }
-    }
-  }
-  
-  add_on(hll_list, lang_input_file_is_l_enum);
-  add_on(syslib_list, lang_input_file_is_search_file_enum);
-}
-
-static void
-lnk960_before_allocation()
-{
-}
-static void
-lnk960_after_allocation()
-{
-  extern ld_config_type config;
-  if (config.relocateable_output == false) {
-    lang_abs_symbol_at_end_of(".text","_etext");
-    lang_abs_symbol_at_end_of(".data","_edata");
-    lang_abs_symbol_at_beginning_of(".bss","_bss_start");
-    lang_abs_symbol_at_end_of(".bss","_end");
-  }
-}
-
-
-static struct
- {
-   unsigned  long number;
-   char *name; 
- }
-machine_table[] = {
-       bfd_mach_i960_core      ,"CORE",
-       bfd_mach_i960_kb_sb     ,"KB",
-       bfd_mach_i960_kb_sb     ,"SB",
-       bfd_mach_i960_mc        ,"MC",
-       bfd_mach_i960_xa        ,"XA",
-       bfd_mach_i960_ca        ,"CA",
-       bfd_mach_i960_ka_sa     ,"KA",
-       bfd_mach_i960_ka_sa     ,"SA",
-
-       bfd_mach_i960_core      ,"core",
-       bfd_mach_i960_kb_sb     ,"kb",
-       bfd_mach_i960_kb_sb     ,"sb",
-       bfd_mach_i960_mc        ,"mc",
-       bfd_mach_i960_xa        ,"xa",
-       bfd_mach_i960_ca        ,"ca",
-       bfd_mach_i960_ka_sa     ,"ka",
-       bfd_mach_i960_ka_sa     ,"sa",
-       0,(char *)NULL
-};
-
-static void
-lnk960_set_output_arch()
-{
-  /* Set the output architecture and machine if possible */
-  unsigned int i;
-  ldfile_output_machine = bfd_mach_i960_core;
-  for (i= 0; machine_table[i].name != (char*)NULL; i++) {
-    if (strcmp(ldfile_output_machine_name,machine_table[i].name)==0) {
-      ldfile_output_machine = machine_table[i].number;
-      break;
-    }
-  }
-  bfd_set_arch_mach(output_bfd, ldfile_output_architecture, ldfile_output_machine);
-}
-
-static char *
-lnk960_choose_target()
-{
-#ifdef GNU960
-
-  return bfd_make_targ_name(BFD_COFF_FORMAT,HOST_BYTE_ORDER_BIG_P);
-
-#else
-
-  char *from_outside = getenv(TARGET_ENVIRON);
-  if (from_outside != (char *)NULL)
-    return from_outside;
-  return LNK960_TARGET;
-
-#endif
-}
-
-/* The default script if none is offered */
-static char *lnk960_script = 
-#include "ld-lnk960.x"
-;
-
-
-static char *lnk960_script_relocateable = 
-#include "ld-lnk960-r.x"
-;
-
-static char *lnk960_get_script()
-{
-  extern ld_config_type config;
-  if (config.relocateable_output) {
-    return lnk960_script_relocateable;
-  }
-  return lnk960_script;
-}
-struct ld_emulation_xfer_struct ld_lnk960_emulation = 
-{
-  lnk960_before_parse,
-  lnk960_syslib,
-  lnk960_hll,
-  lnk960_after_parse,
-  lnk960_after_allocation,
-  lnk960_set_output_arch,
-  lnk960_choose_target,
-  lnk960_before_allocation,
-  lnk960_get_script,
-};
diff --git a/ld/ld-lnk960.script b/ld/ld-lnk960.script
deleted file mode 100755 (executable)
index f498412..0000000
+++ /dev/null
@@ -1,21 +0,0 @@
-
-SECTIONS 
-{ 
-  .text : 
-  { 
-    *(.text) 
-    }  
-_etext = . ;
-  .data  SIZEOF(.text) + ADDR(.text):
-  { 
-    *(.data) 
-    }  
-_edata = .; 
-  .bss   SIZEOF(.data) + ADDR(.data) :    
-  { 
-   _bss_start = . ;
-   *(.bss)  
-   [COMMON] 
-    } 
-_end = . ; 
-} 
diff --git a/ld/ld-vanilla.c b/ld/ld-vanilla.c
deleted file mode 100755 (executable)
index 883fb1d..0000000
+++ /dev/null
@@ -1,124 +0,0 @@
-/* Copyright (C) 1991 Free Software Foundation, Inc.
-
-This file is part of GLD, the Gnu Linker.
-
-GLD is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 1, or (at your option)
-any later version.
-
-GLD is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with GLD; see the file COPYING.  If not, write to
-the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-/*
- *  $Id$ 
- *
-*/
-
-/* 
- *  A vanilla emulation with no defaults
- *
- *  Written by Steve Chamberlain steve@cygnus.com
- */
-
-
-#include "sysdep.h"
-#include "bfd.h"
-
-
-#include "ld.h"
-#include "config.h"
-#include "ld-emul.h"
-#include "ldfile.h"
-#include "ldmisc.h"
-
-extern  boolean lang_float_flag;
-
-
-extern enum bfd_architecture ldfile_output_architecture;
-extern unsigned long ldfile_output_machine;
-extern char *ldfile_output_machine_name;
-
-extern bfd *output_bfd;
-
-
-
-static void vanilla_before_parse()
-{
-}
-
-
-static void 
-vanilla_after_parse()
-{
-
-}
-
-static void
-vanilla_after_allocation()
-{
-
-}
-
-static void
-vanilla_before_allocation()
-{
-
-}
-
-
-static void
-vanilla_set_output_arch()
-{
-  /* Set the output architecture and machine if possible */
-  unsigned long  machine = 0;
-  bfd_set_arch_mach(output_bfd, ldfile_output_architecture, machine);
-}
-
-static char *
-vanilla_choose_target()
-{
-  char *from_outside = getenv(TARGET_ENVIRON);
-  if (from_outside != (char *)NULL)
-    return from_outside;
-  return VANILLA_TARGET;
-}
-
-static void
-vanilla_syslib()
-{
-  info("%S SYSLIB ignored\n");
-}
-
-static void
-vanilla_hll(ignore)
-char  *ignore;
-{
-  info("%S HLL ignored\n");
-}
-
-                            
-static char *vanilla_get_script()
-{                           
-return "";
-}
-
-struct ld_emulation_xfer_struct ld_vanilla_emulation = 
-{
-  vanilla_before_parse,
-  vanilla_syslib,
-  vanilla_hll,
-  vanilla_after_parse,
-  vanilla_after_allocation,
-  vanilla_set_output_arch,
-  vanilla_choose_target,
-  vanilla_before_allocation,
-  vanilla_get_script,
-};
-
diff --git a/ld/ld.tex b/ld/ld.tex
deleted file mode 100755 (executable)
index 1764ad5..0000000
--- a/ld/ld.tex
+++ /dev/null
@@ -1,1014 +0,0 @@
-\input texinfo
-@parindent=0pt
-@setfilename gld
-@c @@setchapternewpage odd
-@settitle GLD, The GNU linker
-@titlepage
-@title{gld}
-@subtitle{The gnu loader}
-@sp 1
-@subtitle Second Edition---gld version 2.0
-@subtitle January 1991
-@vskip 0pt plus 1filll
-Copyright @copyright{} 1991 Free Software Foundation, Inc.
-
-Permission is granted to make and distribute verbatim copies of
-this manual provided the copyright notice and this permission notice
-are preserved on all copies.
-
-Permission is granted to copy and distribute modified versions of this
-manual under the conditions for verbatim copying, provided also that
-the entire resulting derived work is distributed under the terms of a
-permission notice identical to this one.
-
-Permission is granted to copy and distribute translations of this manual
-into another language, under the above conditions for modified versions.
-
-@author {Steve Chamberlain}
-@author {Cygnus Support}
-@author {steve@@cygnus.com}
-@end titlepage
-
-@node Top,,,
-@comment  node-name,  next,  previous,  up
-@ifinfo
-This file documents the GNU linker gld.
-@end ifinfo
-
-@c chapter What does a linker do ?
-@c chapter Command Language
-@noindent
-@chapter Overview
-
-
-The @code{gld} command combines a number of object and archive files,
-relocates their data and ties up symbol references. Often the last
-step in building a new compiled program to run is a call to @code{gld}.
-
-The @code{gld} command accepts Linker Command Language files in
-a superset of AT+T's Link Editor Command Language syntax,
-to provide explict and total control over the linking process.
-
-This version of @code{gld} uses the general purpose @code{bfd} libraries
-to operate on object files. This allows @code{gld} to read and
-write any of the formats supported by @code{bfd}, different
-formats may be linked together producing any available object file. 
-
-Supported formats:
-@itemize @bullet
-@item
-Sun3 68k a.out
-@item 
-IEEE-695 68k Object Module Format
-@item 
-Oasys 68k Binary Relocatable Object File Format
-@item 
-Sun4 sparc a.out
-@item 
-88k bcs coff
-@item 
-i960 coff little endian
-@item 
-i960 coff big endian
-@item 
-i960 b.out little endian
-@item 
-i960 b.out big endian
-@item
-s-records
-@end itemize
-When linking similar formats, @code{gld} maintains all debugging
-information. 
-
-@chapter Command line options
-
-@example
-  gld [ -Bstatic ]  [ -D @var{datasize} ] 
-      [ -c @var{filename} ]
-      [ -d ]  | [ -dc ] | [ -dp ]
-      [ -i ]
-      [ -e @var{entry} ]  [ -l @var{arch} ]  [ -L @var{searchdir} ]  [ -M ]  
-      [ -N | -n | -z ]  [ -noinhibit-exec ]  [ -r ]  [ -S ]  [ -s ]  
-      [ -f @var{fill} ]
-      [ -T @var{textorg} ]  [ -Tdata @var{dataorg} ]  [ -t ]  [ -u @var{sym}]
-      [ -X ]  [ -x ] 
-      [-o @var{output} ] @var{objfiles}@dots{}
-@end example
-
-Command-line options to GNU @code{gld} may be specified in any order, and
-may be repeated at will.  For the most part, repeating an option with a
-different argument will either have no further effect, or override prior
-occurrences (those further to the left on the command line) of an
-option.  
-
-The exceptions which may meaningfully be present several times
-are @code{-L}, @code{-l}, and @code{-u}.
-
-@var{objfiles} may follow, precede, or be mixed in with
-command-line options; save that an @var{objfiles} argument may not be
-placed between an option flag and its argument.
-
-Option arguments must follow the option letter without intervening
-whitespace, or be given as separate arguments immediately following the
-option that requires them.
-
-@table @code
-@item @var{objfiles}@dots{}
-The object files @var{objfiles} to be linked; at least one must be specified.
-
-@item -Bstatic 
-This flag is accepted for command-line compatibility with the SunOS linker,
-but has no effect on @code{gld}.
-
-@item -c @var{commandfile}
-Directs @code{gld} to read linkage commands from the file @var{commandfile}.
-
-@item -D @var{datasize}
-Use this option to specify a target size for the @code{data} segment of
-your linked program.  The option is only obeyed if @var{datasize} is
-larger than the natural size of the program's @code{data} segment.
-
-@var{datasize} must be an integer specified in hexadecimal.
-
-@code{ld} will simply increase the size of the @code{data} segment,
-padding the created gap with zeros, and reduce the size of the
-@code{bss} segment to match.
-
-@item -d
-Force @code{ld} to assign space to common symbols
-even if a relocatable output file is specified (@code{-r}).
-
-@item -dc | -dp
-This flags is accepted for command-line compatibility with the SunOS linker,
-but has no effect on @code{gld}.
-
-@item -e @var{entry} 
-Use @var{entry} as the explicit symbol for beginning execution of your
-program, rather than the default entry point. If this symbol is
-not specified, the symbol @code{start} is used as the entry address.
-If there is no symbol called @code{start}, then the entry address
-is set to the first address in the first output section 
-(usually the @samp{text} section).
-
-@item -f @var{fill}
-Sets the default fill pattern for ``holes'' in the output file to
-the lowest two bytes of the expression specified.
-
-@item -i
-Produce an incremental link (same as option @code{-r}).
-
-@item -l @var{arch} 
-Add an archive file @var{arch} to the list of files to link.  This 
-option may be used any number of times.  @code{ld} will search its
-path-list for occurrences of @code{lib@var{arch}.a} for every @var{arch}
-specified.
-
-@c This also has a side effect of using the "c++ demangler" if we happen
-@c to specify -llibg++.  Document?  pesch@@cygnus.com, 24jan91
-
-@item -L @var{searchdir} 
-This command adds path @var{searchdir} to the
-list of paths that @code{gld} will search for archive libraries.  You
-may use this option any number of times.
-
-@c Should we make any attempt to list the standard paths searched
-@c without listing?  When hacking on a new system I often want to know
-@c this, but this may not be the place... it's not constant across
-@c systems, of course, which is what makes it interesting.
-@c pesch@@cygnus.com, 24jan91.
-
-@item -M 
-@itemx -m
-Print (to the standard output file) a link map---diagnostic information
-about where symbols are mapped by @code{ld}, and information on global
-common storage allocation.
-
-@item -N 
-specifies read and writable @code{text} and @code{data} sections. If
-the output format supports Unix style magic numbers, then OMAGIC is set.
-
-@item -n 
-sets the text segment to be read only, and @code{NMAGIC} is written
-if possible.
-
-@item -o @var{output}
-@var{output} is a name for the program produced by @code{ld}; if this
-option is not specified, the name @samp{a.out} is used by default.
-
-@item -r 
-Generates relocatable output---i.e., generate an output file that can in
-turn serve as input to @code{gld}.  As a side effect, this option also
-sets the output file's magic number to @code{OMAGIC}; see @samp{-N}. If this
-option is not specified, an absolute file is produced.
-
-@item -S 
-Omits debugger symbol information (but not all symbols) from the output file.
-
-@item -s 
-Omits all symbol information from the output file.
-
-@item -T @var{textorg} 
-@itemx -Ttext @var{textorg}
-Use @var{textorg} as the starting address for the @code{text} segment of the
-output file.  Both forms of this option are equivalent.  The option
-argument must be a hexadecimal integer.
-
-@item -Tdata @var{dataorg} 
-Use @var{dataorg} as the starting address for the @code{data} segment of
-the output file.  The option argument must be a hexadecimal integer.
-
-@item -t 
-Prints names of input files as @code{ld} processes them.
-
-@item -u @var{sym}
-Forces @var{sym} to be entered in the output file as an undefined symbol.
-This may, for example, trigger linking of additional modules from
-standard libraries.  @code{-u} may be repeated with different option
-arguments to enter additional undefined symbols. This option is equivalent
-to the @code{EXTERN} linker command.
-
-@item -X 
-If @code{-s} or @code{-S} is also specified, delete only local symbols
-beginning with @samp{L}.
-
-@item -z
-@code{-z} sets @code{ZMAGIC}, the default: the @code{text} segment is
-read-only, demand pageable, and shared.  
-
-Specifying a relocatable output file (@code{-r}) will also set the magic
-number to @code{OMAGIC}.
-
-See description of @samp{-N}.
-
-
-@end table
-@chapter Command Language
-
-
-The command language allows explicit control over the linkage process, allowing
-specification of:
-@table @bullet
-@item input files 
-@item file formats
-@item output file format
-@item addresses of sections
-@item placement of common blocks
-@item and more
-@end table
-
-A command file may be supplied to the linker, either explicitly through the
-@code{-c} option, or implicitly as an ordinary file. If the linker opens
-a file which does not have a reasonable object or archive format, it tries
-to read the file as if it were a command file.
-@section Structure
-To be added
-
-@section Expressions
-The syntax for expressions in the command language is identical to that of
-C expressions, with the following features:
-@table @bullet
-@item All expressions evaluated as integers and
-are of ``long'' or ``unsigned long'' type.
-@item All constants are integers.
-@item All of the C arithmetic operators are provided.
-@item Global variables may be referenced, defined and created.
-@item Build in functions may be called.
-@end table
-
-@section Expressions
-
-The linker has a practice of ``lazy evaluation'' for expressions; it only
-calculates an expression when absolutely necessary. For instance, 
-when the linker reads in the command file it has to know the values
-of the start address and the length of the memory regions for linkage to continue, so these
-values are worked out, but other values (such as symbol values) are not
-known or needed until after storage allocation.
-They are evaluated later, when the other
-information, such as the sizes of output sections are available for use in
-the symbol assignment expression.
-
-When a linker expression is evaluated and assigned to a variable it is given
-either an absolute or a relocatable type. An absolute expression type
-is one in which the symbol contains the value that it will have in the
-output file, a relocateable expression type is one in which the value
-is expressed as a fixed offset from the base of a section.
-
-The type of the expression is controlled by its position in the script
-file. A symbol assigned within a @code{SECTION} specification is
-created relative to the base of the section, a symbol assigned in any
-other place is created as an absolute symbol. Since a symbol created
-within a @code{SECTION} specification is relative to the base of the
-section it will remain relocatable if relocatable output is requested.
-A symbol may be created with an absolute value even when assigned to
-within a @code{SECTION} specification by using the absolute assignment
-function @code{ABSOLUTE} For example, to create an absolute symbol
-whose address is the last byte of the output section @code{.data}:
-@example
-.data : 
-        @{
-                *(.data)
-                _edata = ABSOLUTE(.) ;
-        @} 
-@end example
-
-Unless quoted, symbol names start with a letter, underscore, point or
-minus sign and may include any letters, underscores, digits, points,
-and minus signs.  Unquoted symbol names must not conflict with any
-keywords.  To specify a symbol which contains odd characters or has
-the same name as a keyword surround it in double quotes:
-@example
-        ``SECTION'' = 9;
-        ``with a space'' = ``also with a space'' + 10;
-@end example
-
-@subsection Integers
-An octal integer is @samp{0} followed by zero or more of the octal
-digits (@samp{01234567}).
-
-A decimal integer starts with a non-zero digit followed by zero or
-more digits (@samp{0123456789}).
-
-A hexadecimal integer is @samp{0x} or @samp{0X} followed by one or
-more hexadecimal digits chosen from @samp{0123456789abcdefABCDEF}.
-
-Integers have the usual values.  To denote a negative integer, use
-the unary operator @samp{-} discussed under expressions.
-
-Additionally the suffixes @code{K} and @code{M} may be used to multiply the
-previous constant by 1024 or 
-@tex
-$1024^2$
-@end tex
-respectively.
-
-@example
-        _as_decimal = 57005;
-        _as_hex = 0xdead;
-        _as_octal = 0157255;
-
-        _4k_1 = 4K;
-        _4k_2 = 4096;
-        _4k_3 = 0x1000;
-@end example
-@subsection Operators
-The linker provides the standard C set of arithmetic operators, with
-the standard bindings and precedence levels:
-@example
-
-@end example
-@tex
-
-\vbox{\offinterlineskip
-\hrule
-\halign
-{\vrule#&\hfil#\hfil&\vrule#&\hfil#\hfil&\vrule#&\hfil#\hfil&\vrule#\cr
-height2pt&&&&&\cr
-&Level&&  associativity  &&Operators&\cr
-height2pt&&&&&\cr
-\noalign{\hrule}
-height2pt&&&&&\cr
-&highest&&&&&&\cr
-&1&&left&&$ ! -         ~$&\cr
-height2pt&&&&&\cr
-&2&&left&&*        /        \%&\cr
-height2pt&&&&&\cr
-&3&&left&&+        -&\cr
-height2pt&&&&&\cr
-&4&&left&&$>> <<$&\cr
-height2pt&&&&&\cr
-&5&&left&&$==        !=        > < <= >=$&\cr
-height2pt&&&&&\cr
-&6&&left&&\&&\cr
-height2pt&&&&&\cr
-&7&&left&&|&\cr
-height2pt&&&&&\cr
-&8&&left&&{\&\&}&\cr
-height2pt&&&&&\cr
-&9&&left&&||&\cr
-height2pt&&&&&\cr
-&10&&right&&? :&\cr
-height2pt&&&&&\cr
-&11&&right&&$${\&=        +=        -=        *=        /=}&\cr
-&lowest&&&&&&\cr
-height2pt&&&&&\cr}
-\hrule}
-@end tex
-
-@section Built in Functions
-The command language provides built in functions for use in
-expressions in linkage scripts.
-@table @bullet 
-@item @code{ALIGN(@var{exp})}
-returns the result of the current location counter (@code{dot})
-aligned to the next @var{exp} boundary, where @var{exp} is a power of
-two.  This is equivalent to @code{(. + @var{exp} -1) & ~(@var{exp}-1)}.
-As an example, to align the output @code{.data} section to the
-next 0x2000 byte boundary after the preceding section and to set a
-variable within the section to the next 0x8000 boundary after the
-input sections:
-@example
-        .data ALIGN(0x2000) :@{
-                *(.data)
-                variable = ALIGN(0x8000);
-        @}
-@end example
-
-@item @code{ADDR(@var{section name})}
-returns the absolute address of the named section if the section has
-already been bound. In the following examples the @code{symbol_1} and
-@code{symbol_2} are assigned identical values:
-@example
-        .output1:
-                @{ 
-                start_of_output_1 $= .;
-                ... 
-                @}
-        .output:
-                @{
-                symbol_1 = ADDR(.output1);
-                symbol_2 = start_of_output_1;
-                @}
-@end example
-
-@item @code{SIZEOF(@var{section name})}
-returns the size in bytes of the named section, if the section has
-been allocated.  In the following example the @code{symbol_1} and
-@code{symbol_2} are assigned identical values:
-@example
-        .output @{
-                .start = . ;
-                ...
-                .end = .;
-                @}
-        symbol_1 = .end - .start;
-        symbol_2 = SIZEOF(.output);
-@end example
-
-@item @code{DEFINED(@var{symbol name})}
-Returns 1 if the symbol is in the linker global symbol table and is
-defined, otherwise it returns 0. This example shows the setting of a
-global symbol @code{begin} to the first location in the @code{.text}
-section, only if there is no other symbol
-called @code{begin} already:
-@example
-        .text: @{
-                begin = DEFINED(begin) ? begin : . ;
-                ...
-        @}
-@end example
-@end table 
-@page
-@section MEMORY Directive
-The linker's default configuration is for all memory to be
-allocatable.  This state may be overridden by using the @code{MEMORY}
-directive.  The @code{MEMORY} directive describes the location and
-size of blocks of memory in the target.  Careful use can describe
-memory regions which may or may not be used by the linker. The linker
-does not shuffle sections to fit into the available regions, but does
-move the requested sections into the correct regions and issue errors
-when the regions become too full.  The syntax is:
-       
-@example
-        MEMORY 
-                @{
-@tex
-                 $\bigl\lbrace {\it name_1} ({\it attr_1}):$ ORIGIN = ${\it origin_1},$ LENGTH $= {\it len_1} \bigr\rbrace $
-@end tex
-
-                @}
-@end example
-@table @code
-@item @var{name}
-is a name used internally by the linker to refer to the region. Any
-symbol name may be used.  The region names are stored in a separate
-name space, and will not conflict with symbols, filenames or section
-names.
-@item @var{attr}
-is an optional list of attributes, parsed for compatibility with the
-AT+T linker
-but ignored by the both the AT+T and the gnu linker.
-@item @var{origin}
-is the start address of the region in physical memory expressed as
-standard linker expression which must evaluate to a constant before
-memory allocation is performed. The keyword @code{ORIGIN} may be
-abbreviated to @code{org} or @code{o}.
-@item @var{len}
-is the size in bytes of the region as a standard linker expression.
-The keyword @code{LENGTH} may be abbreviated to @code{len} or @code{l}
-@end table 
-
-For example, to specify that memory has two regions available for
-allocation; one starting at 0 for 256k, and the other starting at
-0x40000000 for four megabytes:
-
-@example
-        MEMORY 
-                @{
-                rom : ORIGIN= 0, LENGTH = 256K
-                ram : ORIGIN= 0x40000000, LENGTH = 4M
-                @}
-
-@end example
-
-If the combined output sections directed to a region are too big for
-the region the linker will emit an error message.
-@page
-@section SECTIONS Directive
-The @code{SECTIONS} directive 
-controls exactly where input sections are placed into output sections, their
-order and to which output sections they are allocated.
-
-When no @code{SECTIONS} directives are specified, the default action
-of the linker is to place each input section into an identically named
-output section in the order that the sections appear in the first
-file, and then the order of the files.
-
-The syntax of the @code{SECTIONS} directive is:
-
-@example
-   SECTIONS
-   @{
-@tex
-    $\bigl\lbrace {\it name_n}\bigl[options\bigr]\colon$ $\bigl\lbrace {\it statements_n} \bigr\rbrace \bigl[ = {\it fill expression } \bigr] \bigl[ > mem spec \bigr] \bigr\rbrace $
-@end tex
-   @}
-@end example
-
-@table @code
-@item @var{name}
-controls the name of the output section. In formats which only support
-a limited number of sections, such as @code{a.out}, the name must be
-one of the names supported by the format (in the case of a.out,
-@code{.text}, @code{.data} or @code{.bss}). If the output format
-supports any number of sections, but with numbers and not names (in
-the case of IEEE), the name should be supplied as a quoted numeric
-string.  A section name may consist of any sequence characters, but
-any name which does not conform to the standard @code{gld} symbol name
-syntax must be quoted. To copy sections 1 through 4 from a Oasys file
-into the @code{.text} section of an @code{a.out} file, and sections 13
-and 14 into the @code{data} section:
-@example
-
-        SECTION @{
-                .text :@{
-                        *(``1'' ``2'' ``3'' ``4'')
-                @}
-
-                .data :@{
-                        *(``13'' ``14'')
-                @}
-        @}
-@end example
-
-@item @var{fill expression}
-If present this
-expression sets the fill value. Any unallocated holes in the current output
-section when written to the output file will 
-be filled with the two least significant bytes of the value, repeated as
-necessary.
-@page
-@item @var{options}
-the @var{options} parameter is a list of optional arguments specifying
-attributes of the output section, they may be taken from the following
-list:
-@table @bullet{}
-@item @var{addr expression} 
-forces the output section to be loaded at a specified address. The
-address is specified as a standard linker expression. The following
-example generates section @var{output} at location
-@code{0x40000000}:
-@example
-         SECTIONS @{
-                 output 0x40000000: @{
-                        ...
-                   @}
-         @}
-@end example
-Since the built in function @code{ALIGN} references the location
-counter implicitly, a section may be located on a certain boundary by
-using the @code{ALIGN} function in the expression. For example, to
-locate the @code{.data} section on the next 8k boundary after the end
-of the @code{.text} section:
-@example        
-        SECTIONS @{
-                .text @{
-                        ...
-                @}
-                .data ALIGN(4K) @{
-                        ...
-                @}
-        @}
-@end example
-@end table
-@item @var{statements}
-is a list of file names, input sections and assignments. These statements control what is placed into the
-output section.
-The syntax of a single @var{statement} is one of:
-@table @bullet 
-
-@item @var{symbol}  [ $= | += | -= | *= | /= ] @var{ expression} @code{;}
-
-Global symbols may be created and have their values (addresses)
-altered using the assignment statement. The linker tries to put off
-the evaluation of an assignment until all the terms in the source
-expression are known; for instance the sizes of sections cannot be
-known until after allocation, so assignments dependent upon these are
-not performed until after allocation. Some expressions, such as those
-depending upon the location counter @code{dot}, @samp{.} must be
-evaluated during allocation. If the result of an expression is
-required, but the value is not available, then an error results: eg
-@example
-        SECTIONS @{
-              text 9+this_isnt_constant: 
-                        @{
-                        @}
-                @}
-        testscript:21: Non constant expression for initial address
-@end example
-
-@item @code{CREATE_OBJECT_SYMBOLS}
-causes the linker to create a symbol for each input file and place it
-into the specified section set with the value of the first byte of
-data written from the input file.  For instance, with @code{a.out}
-files it is conventional to have a symbol for each input file.
-@example
-        SECTIONS @{
-                .text 0x2020 :
-                         @{
-                        CREATE_OBJECT_SYMBOLS
-                        *(.text)
-                        _etext = ALIGN(0x2000);
-                        @}
-                @}
-@end example
-Supplied with four object files, @code{a.o}, @code{b.o}, @code{c.o},
-and @code{d.o} a run of
-@code{gld} could create a map:
-@example
-From functions like :
-a.c:
-        afunction() { }
-        int adata=1;
-        int abss;
-
-00000000 A __DYNAMIC
-00004020 B _abss
-00004000 D _adata
-00002020 T _afunction
-00004024 B _bbss
-00004008 D _bdata
-00002038 T _bfunction
-00004028 B _cbss
-00004010 D _cdata
-00002050 T _cfunction
-0000402c B _dbss
-00004018 D _ddata
-00002068 T _dfunction
-00004020 D _edata
-00004030 B _end
-00004000 T _etext
-00002020 t a.o
-00002038 t b.o
-00002050 t c.o
-00002068 t d.o
-
-@end example
-
-@item @var{filename} @code{(} @var{section name list} @code{)}
-This command allocates all the named sections from the input object
-file supplied into the output section at the current point. Sections
-are written in the order they appear in the list so:
-@example
-        SECTIONS @{
-                .text 0x2020 :                
-                        @{
-                        a.o(.data)
-                        b.o(.data)
-                        *(.text)
-                        @}
-                .data :
-                        @{
-                        *(.data)
-                        @}
-                .bss :
-                        @{
-                        *(.bss)
-                        COMMON
-                        @}
-        @}
-@end example
-will produce a map:
-@example
-
-        insert here 
-@end example
-@item @code{* (} @var{section name list} @code{)}
-This command causes all sections from all input files which have not
-yet been assigned output sections to be assigned the current output
-section.
-
-@item @var{filename} @code{[COMMON]}
-This allocates all the common symbols from the specified file and places
-them into the current output section.
-
-@item @code{* [COMMON]}
-This allocates all the common symbols from the files which have not
-yet had their common symbols allocated and places them into the current
-output section.
-
-@item @var{filename}
-A filename alone within a @code{SECTIONS} statement will cause all the
-input sections from the file to be placed into the current output
-section at the current location. If the file name has been mentioned
-before with a section name list then only those
-sections which have not yet been allocated are noted. 
-
-The following example reads all of the sections from file all.o and
-places them at the start of output section @code{outputa} which starts
-at location @code{0x10000}. All of the data from section @code{.input1} from
-file foo.o is placed next into the same output section.  All of
-section @code{.input2} is read from foo.o and placed into output
-section @code{outputb}.  Next all of section @code{.input1} is read
-from foo1.o. All of the remaining @code{.input1} and @code{.input2}
-sections from any files are written to output section @code{output3}.
-
-@example
-       SECTIONS        
-              @{
-                outputa 0x10000 :
-                        @{
-                        all.o
-                        foo.o (.input1)
-                        @}
-                outputb :
-                        @{
-                        foo.o (.input2)
-                        foo1.o (.input1)
-                        @}
-                outputc :
-                        @{
-                        *(.input1)
-                        *(.input2)
-                        @}
-                @}
-
-@end example        
-@end table
-@end table
-@section Using the Location Counter
-The special linker variable @code{dot}, @samp{.} always contains the
-current output location counter. Since the @code{dot} always refers to
-a location in an output section, it must always appear in an
-expression within a @code{SECTIONS} directive. The @code{dot} symbol
-may appear anywhere that an ordinary symbol may appear in an
-expression, but its assignments have a side effect. Assigning a value
-to the @code{dot} symbol will cause the location counter to be moved.
-This may be used to create holes in the output section.  The location
-counter may never be moved backwards.
-@example
-        SECTIONS
-        @{
-                output :
-                @{
-                file1(.text)
-                . = . + 1000;
-                file2(.text)
-                . += 1000;
-                file3(.text)
-                . -= 32;
-                file4(.text)
-                @} = 0x1234;
-        @}
-@end example
-In the previous example, @code{file1} is located at the beginning of
-the output section, then there is a 1000 byte gap, filled with 0x1234.
-Then @code{file2} appears, also with a 1000 byte gap following before
-@code{file3} is loaded. Then the first 32 bytes of @code{file4} are
-placed over the last 32 bytes of @code{file3}.
-@section Command Language Syntax
-@section The Entry Point
-The linker chooses the first executable instruction in an output file from a list
-of possibilities, in order:
-@itemize @bullet
-@item 
-The value of the symbol provided to the command line with the @code{-e} option, when
-present.
-@item 
-The value of the symbol provided in the @code{ENTRY} directive,
-if present.
-@item 
-The value of the symbol @code{start}, if present.
-@item 
-The value of the symbol @code{_main}, if present.
-@item 
-The address of the first byte of the @code{.text} section, if present.
-@item 
-The value 0.
-@end itemize
-If the symbol @code{start} is not defined within the set of input
-files to a link, it may be generated by a simple assignment
-expression. eg.
-@example
-        start = 0x2020;
-@end example
-@section Section Attributes
-@section Allocation of Sections into Memory
-@section Defining Symbols
-@chapter Examples of operation
-The simplest case is linking standard Unix object files on a standard
-Unix system supported by the linker. To link a file hello.o:
-@example
-$ gld -o output /lib/crt0.o hello.o -lc
-@end example
-This tells gld to produce a file called @code{output} after linking
-the file @code{/lib/crt0.o} with @code{hello.o} and the library
-@code{libc.a} which will come from the standard search directories.
-@chapter Partial Linking
-Specifying the @code{-r} on the command line causes @code{gld} to
-perform a partial link.
-
-
-@chapter BFD
-
-The linker accesses object and archive files using the @code{bfd}
-libraries. These libraries allow the linker to use the same routines
-to operate on object files whatever the object file format.
-
-A different object file format can be supported simply by creating a
-new @code{bfd} back end and adding it to the library.
-
-Formats currently supported:
-@itemize @bullet
-@item 
-Sun3 68k a.out
-@item 
-IEEE-695 68k Object Module Format
-@item 
-Oasys 68k Binary Relocatable Object File Format
-@item 
-Sun4 sparc a.out
-@item 
-88k bcs coff
-@item 
-i960 coff little endian
-@item 
-i960 coff big endian
-@item 
-i960 b.out little endian
-@item 
-i960 b.out big endian
-@end itemize
-
-As with most implementations, @code{bfd} is a compromise between
-several conflicting requirements. The major factor influencing
-@code{bfd} design was efficiency, any time used converting between
-formats is time which would not have been spent had @code{bfd} not
-been involved. This is partly offset by abstraction payback; since
-@code{bfd} simplifies applications and back ends, more time and care
-may be spent optimizing algorithms for a greater speed.
-
-One minor artifact of the @code{bfd} solution which the
-user should be aware of is information lossage.
-There are two places where useful information can be lost using the 
-@code{bfd} mechanism; during conversion and during output. 
-
-@section How it works
-When an object file is opened, @code{bfd}
-tries to automatically determine the format of the input object file, a
-descriptor is built in memory with pointers to routines to access
-elements of the object file's data structures.
-
-As different information from the the object files is required
-@code{bfd} reads from different sections of the file and processes
-them. For example a very common operation for the linker is processing
-symbol tables.  Each @code{bfd} back end provides a routine for
-converting between the object file's representation of symbols and an
-internal canonical format. When the linker asks for the symbol table
-of an object file, it calls through the memory pointer to the relevant
-@code{bfd} back end routine which reads and converts the table into
-the canonical form.  Linker then operates upon the common form. When
-the link is finished and the linker writes the symbol table of the
-output file, another @code{bfd} back end routine is called which takes
-the newly created symbol table and converts it into the output format.
-
-@section Information Leaks
-@table @bullet{}
-@item Information lost during output.
-The output formats supported by @code{bfd} do not provide identical 
-facilities, and information which may be described in one form 
-has no where to go in another format. One example of this would be
-alignment information in @code{b.out}. There is no where in an @code{a.out}
-format file to store alignment information on the contained data, so when
-a file is linked from @code{b.out} and an @code{a.out} image is produced,
-alignment information is lost. (Note that in this case the linker has the
-alignment information internally, so the link is performed correctly). 
-
-Another example is COFF section names. COFF files may contain an
-unlimited number of sections, each one with a textual section name. If
-the target of the link is a format which does not have many sections
-(eg @code{a.out}) or has sections without names (eg the Oasys format)
-the link cannot be done simply. It is possible to circumvent this
-problem by describing the desired input section to output section
-mapping with the command language.
-
-@item Information lost during canonicalization.  
-The @code{bfd}
-internal canonical form of the external formats is not exhaustive,
-there are structures in input formats for which there is no direct
-representation internally.  This means that the @code{bfd} back ends
-cannot maintain all the data richness through the transformation
-between external to internal and back to external formats.
-
-This limitation is only a problem when using the linker to read one
-format and write another. Each @code{bfd} back end is responsible for
-maintaining as much data as possible, and the internal @code{bfd}
-canonical form has structures which are opaque to the @code{bfd} core,
-and exported only to the back ends. When a file is read in one format,
-the canonical form is generated for @code{bfd} and the linker. At the
-same time, the back end saves away any information which may otherwise
-be lost. If the data is then written back to the same back end, the
-back end routine will be able to use the canonical form provided by
-the @code{bfd} core as well as the information it prepared earlier.
-Since there is a great deal of commonality between back ends, this
-mechanism is very useful. There is no information lost when linking
-big endian COFF to little endian COFF, or from a.out to b.out. When a
-mixture of formats are linked, the information is only lost from the
-files with a different format to the destination.  
-@end table 
-@section Mechanism 
-The smallest amount of information is preserved when there
-is a small union between the information provided by the source
-format, that stored by the canonical format and the information needed
-by the destination format. A brief description of the canonical form
-will help the user appreciate what is possible to be maintained
-between conversions.
-
-@table @bullet 
-@item file level Information on target machine
-architecture, particular implementation and format type are stored on
-a per file basis. Other information includes a demand pageable bit and
-a write protected bit.  Note that information like Unix magic numbers
-is not stored here, only the magic numbers meaning, so a ZMAGIC file
-would have both the demand pageable bit and the write protected text
-bit set.
-
-The byte order of the target is stored on a per file basis, so that
-both big and little endian object files may be linked together at the
-same time.
-@item section level
-Each section in the input file contains the name of the section, the
-original address in the object file, various flags, size and alignment
-information and pointers into other @code{bfd} data structures.
-@item symbol level
-Each symbol contains a pointer to the object file which originally
-defined it, its name, value and various flags bits. When a symbol
-table is read in all symbols are relocated to make them relative to
-the base of the section they were defined in, so each symbol points to
-the containing section. Each symbol also has a varying amount of
-hidden data to contain private data for the back end. Since the symbol
-points to the original file, the symbol private data format is
-accessible. Operations may be done to a list of symbols of wildly
-different formats without problems.
-
-Normal global and simple local symbols are maintained on output, so an
-output file, no matter the format will retain symbols pointing to
-functions, globals, statics and commons.  Some symbol information is
-not worth retaining; in @code{a.out} type information is stored in the
-symbol table as long symbol names. This information would be useless
-to most coff debuggers and may be thrown away with appropriate command
-line switches. (Note that gdb does support stabs in coff).
-
-There is one word of type information within the symbol, so if the
-format supports symbol type information within symbols - (eg COFF,
-IEEE, Oasys) and the type is simple enough to fit within one word
-(nearly everything but aggregates) the information will be preserved.
-
-@item relocation level
-Each canonical relocation record contains a pointer to the symbol to
-relocate to, the offset of the data to relocate, the section the data
-is in and a pointer to a relocation type descriptor. Relocation is
-performed effectively by message passing through the relocation type
-descriptor and symbol pointer. It allows relocations to be performed
-on output data using a relocation method only available in one of the
-input formats. For instance, Oasys provides a byte relocation format.
-A relocation record requesting this relocation type would point
-indirectly to a routine to perform this, so the relocation may be
-performed on a byte being written to a COFF file, even though 68k COFF
-has no such relocation type.
-
-@item line numbers
-Line numbers have to be relocated along with the symbol information.
-Each symbol with an associated list of line number records points to
-the first record of the list.  The head of a line number list consists
-of a pointer to the symbol, which allows divination of the address of
-the function who's line number is being described. The rest of the
-list is tuples offsets into the section and line indexes. Any format
-which can simply derive this information can pass it without lossage
-between formats (COFF, IEEE and Oasys).
-@end table
-
-
-@bye
-
-
diff --git a/ld/ldgld.c b/ld/ldgld.c
deleted file mode 100755 (executable)
index e51d073..0000000
+++ /dev/null
@@ -1,145 +0,0 @@
-/* Copyright (C) 1991 Free Software Foundation, Inc.
-
-This file is part of GLD, the Gnu Linker.
-
-GLD is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 1, or (at your option)
-any later version.
-
-GLD is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with GLD; see the file COPYING.  If not, write to
-the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-/*
- *  $Id$ 
- *
-*/
-
-/* 
- * emulate the original gld
- *
- *  Written by Steve Chamberlain steve@cygnus.com
- */
-
-
-#include "sysdep.h"
-#include "bfd.h"
-
-
-#include "ld.h"
-#include "config.h"
-#include "ldemul.h"
-#include "ldfile.h"
-#include "ldmisc.h"
-
-extern  boolean lang_float_flag;
-
-
-extern enum bfd_architecture ldfile_output_architecture;
-extern unsigned long ldfile_output_machine;
-extern char *ldfile_output_machine_name;
-
-extern bfd *output_bfd;
-
-
-
-static void gld_before_parse()
-{
-  ldfile_add_library_path("/lib");
-  ldfile_add_library_path("/usr/lib");
-  ldfile_add_library_path("/usr/local/lib/lib");
-}
-
-
-static void 
-gld_after_parse()
-{
-
-}
-
-static void
-gld_after_allocation()
-{
-
-}
-
-static void
-gld_before_allocation()
-{
-
-}
-
-
-static void
-gld_set_output_arch()
-{
-  /* Set the output architecture and machine if possible */
-  bfd_set_arch_mach(output_bfd, ldfile_output_architecture, ldfile_output_machine);
-}
-
-static char *
-gld_choose_target()
-{
-  char *from_outside = getenv(TARGET_ENVIRON);
-  if (from_outside != (char *)NULL)
-    return from_outside;
-  return GLD_TARGET;
-}
-
-static void
-gld_syslib()
-{
-  info("%S SYSLIB ignored\n");
-}
-
-static void
-gld_hll(ignore)
-char  *ignore;
-{
-  info("%S HLL ignored\n");
-}
-
-static char *gld_script = 
-#include "ldgld.x"
-;
-
-static char *gld_script_option_Ur  =  
-#include "ldgldUr.x"
-;
-
-static char *gld_script_option_r  =  
-#include "ldgldr.x"
-;           
-                            
-static char *gld_get_script()
-{                           
-  extern ld_config_type config;
-  if (config.relocateable_output == true &&
-      config.build_constructors == true) {
-    return gld_script_option_Ur;
-  }
-  if (config.relocateable_output) {
-    return gld_script_option_r;
-  }
-       
-  return gld_script;
-}
-struct ld_emulation_xfer_struct ld_gld_emulation = 
-{
-  gld_before_parse,
-  gld_syslib,
-  gld_hll,
-  gld_after_parse,
-  gld_after_allocation,
-  gld_set_output_arch,
-  gld_choose_target,
-  gld_before_allocation,
-  gld_get_script,
-};
-
diff --git a/ld/ldgld.sc b/ld/ldgld.sc
deleted file mode 100755 (executable)
index eb87b33..0000000
+++ /dev/null
@@ -1,30 +0,0 @@
-OUTPUT_ARCH(sparc)
-OUTPUT_FORMAT("a.out-sunos-big")
-SEARCH_DIR(/lib)                       
-SEARCH_DIR(/usr/lib)                   
-SEARCH_DIR(/usr/local/lib)             
-__DYNAMIC = 0;                                 
-SECTIONS                               
-{                                      
-  .text 0x2020 BLOCK(0x2000):          
-    {                                  
-      CREATE_OBJECT_SYMBOLS            ;
-      *(.text);                                
-      _etext = ALIGN( 0x2000);         
-    }                                          
-  .data  ALIGN(0x2000)  :              
-    {                                  
-      *(.data);                                
-      CONSTRUCTORS;
-      _edata  =  .;                    
-    }                                          
-  .bss   SIZEOF(.data) + ADDR(.data) : 
-    {                                  
-      *(.bss)                          
-       *(COMMON)                               
-         _end = .;                             
-      __end = .;                               
-    }                                  
-}
-
-
diff --git a/ld/ldgld.script b/ld/ldgld.script
deleted file mode 100755 (executable)
index 15ff71f..0000000
+++ /dev/null
@@ -1,30 +0,0 @@
-OUTPUT_ARCH(sparc)
-OUTPUT_FORMAT("a.out-sunos-big")
-SEARCH_DIR(/lib)                       
-SEARCH_DIR(/usr/lib)                   
-SEARCH_DIR(/usr/local/lib)             
-__DYNAMIC = 0;                                 
-SECTIONS                               
-{                                      
-  .text 0x2020 BLOCK(0x2000):          
-    {                                  
-      CREATE_OBJECT_SYMBOLS            ;
-      *(.text);                                
-      _etext = ALIGN( 0x2000);         
-    }                                          
-  .data  ALIGN(0x2000)  :              
-    {                                  
-      *(.data);                                
-      CONSTRUCTORS;
-      _edata  =  .;                    
-    }                                          
-  .bss   SIZEOF(.data) + ADDR(.data) : 
-    {                                  
-      *(.bss)                          
-       [COMMON]                                
-         _end = .;                             
-      __end = .;                               
-    }                                  
-}
-
-
diff --git a/ld/ldgld68k.c b/ld/ldgld68k.c
deleted file mode 100755 (executable)
index f34e79d..0000000
+++ /dev/null
@@ -1,143 +0,0 @@
-/* Copyright (C) 1991 Free Software Foundation, Inc.
-
-This file is part of GLD, the Gnu Linker.
-
-GLD is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 1, or (at your option)
-any later version.
-
-GLD is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with GLD; see the file COPYING.  If not, write to
-the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-/*
- *  $Id:#
-*/
-
-/* 
- * emulate the original gld running on a 68k system
- *
- *  Written by Steve Chamberlain steve@cygnus.com
- */
-
-
-#include "sysdep.h"
-#include "bfd.h"
-
-#include "ld.h"
-#include "config.h"
-#include "ldemul.h"
-#include "ldfile.h"
-#include "ldmisc.h"
-
-extern  boolean lang_float_flag;
-
-
-extern enum bfd_architecture ldfile_output_architecture;
-extern unsigned long ldfile_output_machine;
-extern char *ldfile_output_machine_name;
-
-extern bfd *output_bfd;
-
-
-
-static void gld68k_before_parse()
-{
-  ldfile_add_library_path("/lib");
-  ldfile_add_library_path("/usr/lib");
-  ldfile_add_library_path("/usr/local/lib/lib");
-  ldfile_output_architecture = bfd_arch_m68k;
-}
-
-
-static void 
-gld68k_after_parse()
-{
-
-}
-
-static void
-gld68k_after_allocation()
-{
-
-}
-
-static void
-gld68k_before_allocation()
-{
-
-}
-
-
-static void
-gld68k_set_output_arch()
-{
-  /* Set the output architecture and machine if possible */
-  unsigned long  machine = 0;
-  bfd_set_arch_mach(output_bfd, ldfile_output_architecture, machine);
-}
-
-static char *
-gld68k_choose_target()
-{
-  char *from_outside = getenv(TARGET_ENVIRON);
-  if (from_outside != (char *)NULL)
-    return from_outside;
-  return GLD68K_TARGET;
-}
-
-static void
-gld68k_syslib()
-{
-  info("%S SYSLIB ignored\n");
-}
-
-static void
-gld68k_hll(ignore)
-char  *ignore;
-{
-  info("%S HLL ignored\n");
-}
-
-static char *gld68k_script  =  
-#include "ldgld68k.x"
-;
-
-static char *gld68k_script_option_Ur  =  
-#include "ldgld68kUr.x"
-;
-static char *gld68k_script_option_r  =  
-#include "ldgld68kr.x"
-;                           
-static char *gld68k_get_script()
-{                           
-  extern ld_config_type config;
-  if (config.relocateable_output == true &&
-      config.build_constructors == true) {
-    return gld68k_script_option_Ur;
-  }
-  if (config.relocateable_output) {
-    return gld68k_script_option_r;
-  }
-       
-  return gld68k_script;
-}
-struct ld_emulation_xfer_struct ld_gld68k_emulation = 
-{
-  gld68k_before_parse,
-  gld68k_syslib,
-  gld68k_hll,
-  gld68k_after_parse,
-  gld68k_after_allocation,
-  gld68k_set_output_arch,
-  gld68k_choose_target,
-  gld68k_before_allocation,
-  gld68k_get_script,
-};
-
diff --git a/ld/ldgld68k.sc b/ld/ldgld68k.sc
deleted file mode 100755 (executable)
index 9d7df2d..0000000
+++ /dev/null
@@ -1,30 +0,0 @@
-OUTPUT_FORMAT("a.out-sunos-big")
-OUTPUT_ARCH(m68k)
-
-SEARCH_DIR(/lib)                       
-SEARCH_DIR(/usr/lib)                   
-SEARCH_DIR(/usr/local/lib)             
-__DYNAMIC  =  0;                               
-SECTIONS                               
-{                                      
-  .text 0x2020 BLOCK(0x2000):          
-  {                                    
-   CREATE_OBJECT_SYMBOLS               
-    *(.text)                           
-    _etext  =  ALIGN( 0x2000);         
-    }                                          
-  .data  ALIGN(0x20000)  :             
-  {                                    
-    *(.data)                           
-   CONSTRUCTORS
-      _edata  =  .;                    
-  }                                    
-  .bss   SIZEOF(.data) + ADDR(.data) : 
-  {                                    
-   *(.bss)                             
-   *(COMMON)                           
-     _end = .;                         
-     __end = .;                                
-    }                                  
-}
-
diff --git a/ld/ldgld68k.script b/ld/ldgld68k.script
deleted file mode 100755 (executable)
index be91d91..0000000
+++ /dev/null
@@ -1,28 +0,0 @@
-OUTPUT_FORMAT("a.out-sunos-big")
-OUTPUT_ARCH(m68k)
-
-SEARCH_DIR(/lib)                       
-SEARCH_DIR(/usr/lib)                   
-SEARCH_DIR(/usr/local/lib)             
-__DYNAMIC  =  0;                               
-SECTIONS                               
-{                                      
-  .text 0x2020 BLOCK(0x2000):          
-  {                                    
-   CREATE_OBJECT_SYMBOLS               
-    *(.text)                           
-    _etext  =  ALIGN( 0x2000);         
-    }                                          
-  .data  ALIGN(0x20000)  :             
-  {                                    
-    *(.data)                           
-      _edata  =  .;                    
-  }                                    
-  .bss   SIZEOF(.data) + ADDR(.data) : 
-  {                                    
-   *(.bss)                             
-   [COMMON]                            
-     _end = .;                         
-    }                                  
-}
-
diff --git a/ld/ldgld68kUr.sc b/ld/ldgld68kUr.sc
deleted file mode 100755 (executable)
index aa89c6a..0000000
+++ /dev/null
@@ -1,21 +0,0 @@
-SEARCH_DIR(/lib)                       
-SEARCH_DIR(/usr/lib)                   
-SEARCH_DIR(/usr/local/lib)             
-SECTIONS                               
-{                                      
-  .text 0:                             
-    {                                  
-      CREATE_OBJECT_SYMBOLS                
-       *(.text)                                
-       }                                       
-  .data SIZEOF(.text) + ADDR(.text) :  
-    {                                  
-      *(.data)                                 
-    }                                  
-  .bss SIZEOF(.data) + ADDR(.data) :   
-    {                                  
-      *(.bss)                          
-       [COMMON]                                
-       }                                       
-}                                      
-
diff --git a/ld/ldgld68kUr.script b/ld/ldgld68kUr.script
deleted file mode 100755 (executable)
index aa89c6a..0000000
+++ /dev/null
@@ -1,21 +0,0 @@
-SEARCH_DIR(/lib)                       
-SEARCH_DIR(/usr/lib)                   
-SEARCH_DIR(/usr/local/lib)             
-SECTIONS                               
-{                                      
-  .text 0:                             
-    {                                  
-      CREATE_OBJECT_SYMBOLS                
-       *(.text)                                
-       }                                       
-  .data SIZEOF(.text) + ADDR(.text) :  
-    {                                  
-      *(.data)                                 
-    }                                  
-  .bss SIZEOF(.data) + ADDR(.data) :   
-    {                                  
-      *(.bss)                          
-       [COMMON]                                
-       }                                       
-}                                      
-
diff --git a/ld/ldgld68kr.sc b/ld/ldgld68kr.sc
deleted file mode 100755 (executable)
index 8cbc9dc..0000000
+++ /dev/null
@@ -1,22 +0,0 @@
-
-SEARCH_DIR(/lib)                       
-SEARCH_DIR(/usr/lib)                   
-SEARCH_DIR(/usr/local/lib)             
-SECTIONS                               
-{                                      
- .text 0:                              
- {                                     
- CREATE_OBJECT_SYMBOLS    
- *(.text)                              
- }                                     
- .data SIZEOF(.text) + ADDR(.text) :   
- {                                     
- *(.data)                              
- }                                     
- .bss SIZEOF(.data) + ADDR(.data) :    
- {                                     
- *(.bss)                               
- [COMMON]                              
- }                                     
-}                                      
-
diff --git a/ld/ldgld68kr.script b/ld/ldgld68kr.script
deleted file mode 100755 (executable)
index 8cbc9dc..0000000
+++ /dev/null
@@ -1,22 +0,0 @@
-
-SEARCH_DIR(/lib)                       
-SEARCH_DIR(/usr/lib)                   
-SEARCH_DIR(/usr/local/lib)             
-SECTIONS                               
-{                                      
- .text 0:                              
- {                                     
- CREATE_OBJECT_SYMBOLS    
- *(.text)                              
- }                                     
- .data SIZEOF(.text) + ADDR(.text) :   
- {                                     
- *(.data)                              
- }                                     
- .bss SIZEOF(.data) + ADDR(.data) :    
- {                                     
- *(.bss)                               
- [COMMON]                              
- }                                     
-}                                      
-
diff --git a/ld/ldgld960.c b/ld/ldgld960.c
deleted file mode 100755 (executable)
index f3a3b0c..0000000
+++ /dev/null
@@ -1,169 +0,0 @@
-/* Copyright (C) 1991 Free Software Foundation, Inc.
-
-This file is part of GLD, the Gnu Linker.
-
-GLD is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 1, or (at your option)
-any later version.
-
-GLD is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with GLD; see the file COPYING.  If not, write to
-the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-/*
-   $Id$ 
-*/
-
-/* 
- * emulate the Intels port of  gld
- */
-
-
-#include "bfd.h"
-#include "sysdep.h"
-
-
-#include "ld.h"
-#include "config.h"
-#include "ldemul.h"
-#include "ldfile.h"
-#include "ldmisc.h"
-
-
-/* IMPORTS */
-extern char *output_filename;
-extern  boolean lang_float_flag;
-
-
-extern enum bfd_architecture ldfile_output_architecture;
-extern unsigned long ldfile_output_machine;
-extern char *ldfile_output_machine_name;
-
-extern bfd *output_bfd;
-
-
-
-#ifdef GNU960
-
-static void
-gld960_before_parse()
-{
-  static char *env_variables[] = { "G960LIB", "G960BASE", 0 };
-  char **p;
-  char *env ;
-
-  for ( p = env_variables; *p; p++ ){
-    env =  (char *) getenv(*p);
-    if (env) {
-      ldfile_add_library_path(concat(env,"/lib/libbout",""));
-    }
-  }
-  ldfile_output_architecture = bfd_arch_i960;
-}
-
-#else  /* not GNU960 */
-
-static void gld960_before_parse()
-{
-  char *env ;
-  env =  getenv("G960LIB");
-  if (env) {
-    ldfile_add_library_path(env);
-  }
-  env = getenv("G960BASE");
-  if (env) {
-    ldfile_add_library_path(concat(env,"/lib",""));
-  }
-  ldfile_output_architecture = bfd_arch_i960;
-}
-
-#endif /* GNU960 */
-
-
-static void 
-gld960_after_parse()
-{
-
-}
-
-static void
-gld960_after_allocation()
-{
-
-}
-
-static void
-gld960_before_allocation()
-{
-
-}
-
-
-static void
-gld960_set_output_arch()
-{
-  bfd_set_arch_mach(output_bfd, ldfile_output_architecture, bfd_mach_i960_core);
-}
-
-static char *
-gld960_choose_target()
-{
-#ifdef GNU960
-
-  output_filename = "b.out";
-  return bfd_make_targ_name(BFD_BOUT_FORMAT, 0);
-
-#else
-
-  char *from_outside = getenv(TARGET_ENVIRON);
-  output_filename = "b.out";
-
-  if (from_outside != (char *)NULL)
-    return from_outside;
-  return GLD960_TARGET;
-
-#endif
-}
-
-static void
-gld960_syslib()
-{
-  info("%S SYSLIB ignored\n");
-}
-
-static void
-gld960_hll()
-{
-  info("%S HLL ignored\n");
-}
-
-
-static char *script = 
-#include "ldgld960.x"
-;
-
-
-static char *
-gld960_get_script()
-{
-return script;
-}
-
-struct ld_emulation_xfer_struct ld_gld960_emulation = 
-{
-  gld960_before_parse,
-  gld960_syslib,
-  gld960_hll,
-  gld960_after_parse,
-  gld960_after_allocation,
-  gld960_set_output_arch,
-  gld960_choose_target,
-  gld960_before_allocation,
-  gld960_get_script,
-};
diff --git a/ld/ldgld960.sc b/ld/ldgld960.sc
deleted file mode 100755 (executable)
index 449d3fa..0000000
+++ /dev/null
@@ -1,23 +0,0 @@
-SECTIONS 
-{ 
-  .text : 
-  { 
-   CREATE_OBJECT_SYMBOLS 
-    *(.text) 
-      _etext = .;
-    }  
-  .data  SIZEOF(.text) + ADDR(.text):
-  { 
-    *(.data) 
-      _edata = .; 
-    }  
-  .bss   SIZEOF(.data) + ADDR(.data) :    
-  { 
-       _bss_start = .;
-       *(.bss)  
-       *(COMMON) 
-       _end = . ; 
-   } 
-} 
diff --git a/ld/ldgld960.script b/ld/ldgld960.script
deleted file mode 100755 (executable)
index 1c40a73..0000000
+++ /dev/null
@@ -1,23 +0,0 @@
-SECTIONS 
-{ 
-  .text : 
-  { 
-   CREATE_OBJECT_SYMBOLS 
-    *(.text) 
-      _etext = .;
-    }  
-  .data  SIZEOF(.text) + ADDR(.text):
-  { 
-    *(.data) 
-      _edata = .; 
-    }  
-  .bss   SIZEOF(.data) + ADDR(.data) :    
-  { 
-       _bss_start = .;
-       *(.bss)  
-       [COMMON] 
-       _end = . ; 
-   } 
-} 
diff --git a/ld/ldgldUr.sc b/ld/ldgldUr.sc
deleted file mode 100755 (executable)
index e7d9b44..0000000
+++ /dev/null
@@ -1,24 +0,0 @@
-
-SEARCH_DIR(/lib)                       
-SEARCH_DIR(/usr/lib)                   
-SEARCH_DIR(/usr/local/lib)             
-SECTIONS                               
-{                                      
-  .text 0:                             
-  {                                    
-   CREATE_OBJECT_SYMBOLS                
-    *(.text)                           
-    }                                  
-  .data SIZEOF(.text) + ADDR(.text) :  
-  {                                    
-    *(.data)                           
-       CONSTRUCTORS
-    ___end_list__  =  . ;                      
-    }                                  
-  .bss SIZEOF(.data) + ADDR(.data) :   
-  {                                    
-    *(.bss)                            
-   [COMMON]                            
-    }                                  
-}                                      
-
diff --git a/ld/ldgldUr.script b/ld/ldgldUr.script
deleted file mode 100755 (executable)
index e7d9b44..0000000
+++ /dev/null
@@ -1,24 +0,0 @@
-
-SEARCH_DIR(/lib)                       
-SEARCH_DIR(/usr/lib)                   
-SEARCH_DIR(/usr/local/lib)             
-SECTIONS                               
-{                                      
-  .text 0:                             
-  {                                    
-   CREATE_OBJECT_SYMBOLS                
-    *(.text)                           
-    }                                  
-  .data SIZEOF(.text) + ADDR(.text) :  
-  {                                    
-    *(.data)                           
-       CONSTRUCTORS
-    ___end_list__  =  . ;                      
-    }                                  
-  .bss SIZEOF(.data) + ADDR(.data) :   
-  {                                    
-    *(.bss)                            
-   [COMMON]                            
-    }                                  
-}                                      
-
diff --git a/ld/ldglda29k.c b/ld/ldglda29k.c
deleted file mode 100755 (executable)
index 45662f0..0000000
+++ /dev/null
@@ -1,144 +0,0 @@
-/* Copyright (C) 1991 Free Software Foundation, Inc.
-
-This file is part of GLD, the Gnu Linker.
-
-GLD is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 1, or (at your option)
-any later version.
-
-GLD is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with GLD; see the file COPYING.  If not, write to
-the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-/*
- *  $Id:#
-*/
-
-/* 
- * emulate the original gld running on an a29k system
- *
- *  Written by David Wood @ New York University 
- */
-
-
-#include "sysdep.h"
-#include "bfd.h"
-
-#include "ld.h"
-#include "config.h"
-#include "ldemul.h"
-#include "ldfile.h"
-#include "ldmisc.h"
-
-extern  boolean lang_float_flag;
-
-
-extern enum bfd_architecture ldfile_output_architecture;
-extern unsigned long ldfile_output_machine;
-extern char *ldfile_output_machine_name;
-
-extern bfd *output_bfd;
-
-
-
-static void gld29k_before_parse()
-{
-#ifndef NOTDEF         /* Cross developing for now */
-  ldfile_add_library_path("/lib");
-  ldfile_add_library_path("/usr/lib");
-  ldfile_add_library_path("/usr/local/lib");
-#endif
-  ldfile_output_architecture = bfd_arch_a29k;
-}
-
-
-static void 
-gld29k_after_parse()
-{
-
-}
-
-static void
-gld29k_after_allocation()
-{
-
-}
-
-static void
-gld29k_before_allocation()
-{
-
-}
-
-static void
-gld29k_set_output_arch()
-{
-  /* Set the output architecture and machine if possible */
-  unsigned long  machine = 0;
-  bfd_set_arch_mach(output_bfd, ldfile_output_architecture, machine);
-}
-
-static char *
-gld29k_choose_target()
-{
-  char *from_outside = getenv(TARGET_ENVIRON);
-  if (from_outside != (char *)NULL)
-    return from_outside;
-  return GLD29K_TARGET;
-}
-
-static void
-gld29k_syslib()
-{
-  info("%S SYSLIB ignored\n");
-}
-
-static void
-gld29k_hll(ignore)
-char  *ignore;
-{
-  info("%S HLL ignored\n");
-}
-
-static char *gld29k_script  =  
-#include "ldglda29k.x"
-;
-
-static char *gld29k_script_option_Ur  =  
-#include "ldglda29kUr.x"
-;
-static char *gld29k_script_option_r  =  
-#include "ldglda29kr.x"
-;                           
-static char *gld29k_get_script()
-{                           
-  extern ld_config_type config;
-  if (config.relocateable_output == true &&
-      config.build_constructors == true) {
-    return gld29k_script_option_Ur;
-  }
-  if (config.relocateable_output) {
-    return gld29k_script_option_r;
-  }
-       
-  return gld29k_script;
-}
-struct ld_emulation_xfer_struct ld_gld29k_emulation = 
-{
-  gld29k_before_parse,
-  gld29k_syslib,
-  gld29k_hll,
-  gld29k_after_parse,
-  gld29k_after_allocation,
-  gld29k_set_output_arch,
-  gld29k_choose_target,
-  gld29k_before_allocation,
-  gld29k_get_script,
-};
-
diff --git a/ld/ldglda29k.sc b/ld/ldglda29k.sc
deleted file mode 100755 (executable)
index 26e09cf..0000000
+++ /dev/null
@@ -1,38 +0,0 @@
-OUTPUT_FORMAT("coff-a29k-big")
-INPUT(/lab3/u3/sym1/tools/usr/lib/segments.o) /* Has .rstack/.mstack */ 
-SEARCH_DIR(/lib)
-SEARCH_DIR(/usr/lib)
-SEARCH_DIR(/usr/local/lib)
-MEMORY {
-       text    : ORIGIN = 0x1000000, LENGTH = 0x1000000
-       talias  : ORIGIN = 0x2000000, LENGTH = 0x1000000
-       data    : ORIGIN = 0x3000000, LENGTH = 0x1000000
-       mstack  : ORIGIN = 0x4000000, LENGTH = 0x1000000
-       rstack  : ORIGIN = 0x5000000, LENGTH = 0x1000000
-}
-SECTIONS                               
-{                                      
-  .text : {                                    
-    *(.text)
-    __etext  =  .;             
-    *(.lit)                            
-    *(.shdata)  
-  } > text
-  .shbss SIZEOF(.text) + ADDR(.text) : {
-    *(.shbss)                          
-  } 
-  .talias :     { } > talias
-  .data  : {                                   
-    *(.data)                           
-     __edata  =  .;                    
-  } > data
-  .bss   SIZEOF(.data) + ADDR(.data) : 
-  {                                    
-   *(.bss)                             
-   *(COMMON)                           
-     __end = ALIGN(0x8);                               
-  } 
-  .mstack  : { } > mstack
-  .rstack  : { } > rstack 
-}
-
diff --git a/ld/ldglda29k.script b/ld/ldglda29k.script
deleted file mode 100755 (executable)
index 6d7d19a..0000000
+++ /dev/null
@@ -1,38 +0,0 @@
-OUTPUT_FORMAT("coff-a29k-big")
-INPUT(/lab3/u3/sym1/tools/usr/lib/segments.o) /* Has .rstack/.mstack */ 
-SEARCH_DIR(/lab3/u3/sym1/tools/lib)
-SEARCH_DIR(/lab3/u3/sym1/tools/usr/lib)
-SEARCH_DIR(/lab3/u3/sym1/tools/usr/local/lib)
-MEMORY {
-       text    : ORIGIN = 0x1000000, LENGTH = 0x1000000
-       talias  : ORIGIN = 0x2000000, LENGTH = 0x1000000
-       data    : ORIGIN = 0x3000000, LENGTH = 0x1000000
-       mstack  : ORIGIN = 0x4000000, LENGTH = 0x1000000
-       rstack  : ORIGIN = 0x5000000, LENGTH = 0x1000000
-}
-SECTIONS                               
-{                                      
-  .text : {                                    
-    *(.text)
-    __etext  =  .;             
-    *(.lit)                            
-    *(.shdata)  
-  } > text
-  .shbss SIZEOF(.text) + ADDR(.text) : {
-    *(.shbss)                          
-  } 
-  .talias :     { } > talias
-  .data  : {                                   
-    *(.data)                           
-     __edata  =  .;                    
-  } > data
-  .bss   SIZEOF(.data) + ADDR(.data) : 
-  {                                    
-   *(.bss)                             
-   [COMMON]                            
-     __end = ALIGN(0x8);                               
-  } 
-  .mstack  : { } > mstack
-  .rstack  : { } > rstack 
-}
-
diff --git a/ld/ldglda29kUr.sc b/ld/ldglda29kUr.sc
deleted file mode 100755 (executable)
index c8e8e2c..0000000
+++ /dev/null
@@ -1,32 +0,0 @@
-OUTPUT_FORMAT("coff-a29k-big")
-SEARCH_DIR(/lab3/u3/sym1/tools/lib)
-SEARCH_DIR(/lab3/u3/sym1/tools/usr/lib)
-SEARCH_DIR(/lab3/u3/sym1/tools/usr/local/lib)
-MEMORY {
-       text    : ORIGIN = 0x1000000, LENGTH = 0x1000000
-       talias  : ORIGIN = 0x2000000, LENGTH = 0x1000000
-       data    : ORIGIN = 0x3000000, LENGTH = 0x1000000
-       mstack  : ORIGIN = 0x4000000, LENGTH = 0x1000000
-       rstack  : ORIGIN = 0x5000000, LENGTH = 0x1000000
-}
-SECTIONS                               
-{                                      
-  .text 0 : {                                  
-    *(.text)
-    __etext  =  .;             
-    *(.lit)                            
-    *(.shdata)  
-  } > text
-  .shbss SIZEOF(.text) + ADDR(.text) : {
-    *(.shbss)                          
-  } 
-  .data  SIZEOF(.shbss) + ADDR(.shbss): {                                      
-    *(.data)                           
-  } 
-  .bss   SIZEOF(.data) + ADDR(.data) : 
-  {                                    
-   *(.bss)                             
-   [COMMON]                            
-  } 
-}
-
diff --git a/ld/ldglda29kUr.script b/ld/ldglda29kUr.script
deleted file mode 100755 (executable)
index c8e8e2c..0000000
+++ /dev/null
@@ -1,32 +0,0 @@
-OUTPUT_FORMAT("coff-a29k-big")
-SEARCH_DIR(/lab3/u3/sym1/tools/lib)
-SEARCH_DIR(/lab3/u3/sym1/tools/usr/lib)
-SEARCH_DIR(/lab3/u3/sym1/tools/usr/local/lib)
-MEMORY {
-       text    : ORIGIN = 0x1000000, LENGTH = 0x1000000
-       talias  : ORIGIN = 0x2000000, LENGTH = 0x1000000
-       data    : ORIGIN = 0x3000000, LENGTH = 0x1000000
-       mstack  : ORIGIN = 0x4000000, LENGTH = 0x1000000
-       rstack  : ORIGIN = 0x5000000, LENGTH = 0x1000000
-}
-SECTIONS                               
-{                                      
-  .text 0 : {                                  
-    *(.text)
-    __etext  =  .;             
-    *(.lit)                            
-    *(.shdata)  
-  } > text
-  .shbss SIZEOF(.text) + ADDR(.text) : {
-    *(.shbss)                          
-  } 
-  .data  SIZEOF(.shbss) + ADDR(.shbss): {                                      
-    *(.data)                           
-  } 
-  .bss   SIZEOF(.data) + ADDR(.data) : 
-  {                                    
-   *(.bss)                             
-   [COMMON]                            
-  } 
-}
-
diff --git a/ld/ldglda29kr.sc b/ld/ldglda29kr.sc
deleted file mode 100755 (executable)
index c8e8e2c..0000000
+++ /dev/null
@@ -1,32 +0,0 @@
-OUTPUT_FORMAT("coff-a29k-big")
-SEARCH_DIR(/lab3/u3/sym1/tools/lib)
-SEARCH_DIR(/lab3/u3/sym1/tools/usr/lib)
-SEARCH_DIR(/lab3/u3/sym1/tools/usr/local/lib)
-MEMORY {
-       text    : ORIGIN = 0x1000000, LENGTH = 0x1000000
-       talias  : ORIGIN = 0x2000000, LENGTH = 0x1000000
-       data    : ORIGIN = 0x3000000, LENGTH = 0x1000000
-       mstack  : ORIGIN = 0x4000000, LENGTH = 0x1000000
-       rstack  : ORIGIN = 0x5000000, LENGTH = 0x1000000
-}
-SECTIONS                               
-{                                      
-  .text 0 : {                                  
-    *(.text)
-    __etext  =  .;             
-    *(.lit)                            
-    *(.shdata)  
-  } > text
-  .shbss SIZEOF(.text) + ADDR(.text) : {
-    *(.shbss)                          
-  } 
-  .data  SIZEOF(.shbss) + ADDR(.shbss): {                                      
-    *(.data)                           
-  } 
-  .bss   SIZEOF(.data) + ADDR(.data) : 
-  {                                    
-   *(.bss)                             
-   [COMMON]                            
-  } 
-}
-
diff --git a/ld/ldglda29kr.script b/ld/ldglda29kr.script
deleted file mode 100755 (executable)
index c8e8e2c..0000000
+++ /dev/null
@@ -1,32 +0,0 @@
-OUTPUT_FORMAT("coff-a29k-big")
-SEARCH_DIR(/lab3/u3/sym1/tools/lib)
-SEARCH_DIR(/lab3/u3/sym1/tools/usr/lib)
-SEARCH_DIR(/lab3/u3/sym1/tools/usr/local/lib)
-MEMORY {
-       text    : ORIGIN = 0x1000000, LENGTH = 0x1000000
-       talias  : ORIGIN = 0x2000000, LENGTH = 0x1000000
-       data    : ORIGIN = 0x3000000, LENGTH = 0x1000000
-       mstack  : ORIGIN = 0x4000000, LENGTH = 0x1000000
-       rstack  : ORIGIN = 0x5000000, LENGTH = 0x1000000
-}
-SECTIONS                               
-{                                      
-  .text 0 : {                                  
-    *(.text)
-    __etext  =  .;             
-    *(.lit)                            
-    *(.shdata)  
-  } > text
-  .shbss SIZEOF(.text) + ADDR(.text) : {
-    *(.shbss)                          
-  } 
-  .data  SIZEOF(.shbss) + ADDR(.shbss): {                                      
-    *(.data)                           
-  } 
-  .bss   SIZEOF(.data) + ADDR(.data) : 
-  {                                    
-   *(.bss)                             
-   [COMMON]                            
-  } 
-}
-
diff --git a/ld/ldgldi386v.c b/ld/ldgldi386v.c
deleted file mode 100755 (executable)
index 6049bf8..0000000
+++ /dev/null
@@ -1,144 +0,0 @@
-/* Copyright (C) 1991 Free Software Foundation, Inc.
-
-This file is part of GLD, the Gnu Linker.
-
-GLD is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 1, or (at your option)
-any later version.
-
-GLD is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with GLD; see the file COPYING.  If not, write to
-the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-/*
- *  $Id$
-*/
-
-/* 
- * emulate the original gld running on an i386v system
- *
- *  Written by David Wood @ New York University 
- */
-
-
-#include "sysdep.h"
-#include "bfd.h"
-
-#include "ld.h"
-#include "config.h"
-#include "ldemul.h"
-#include "ldfile.h"
-#include "ldmisc.h"
-
-extern  boolean lang_float_flag;
-
-
-extern enum bfd_architecture ldfile_output_architecture;
-extern unsigned long ldfile_output_machine;
-extern char *ldfile_output_machine_name;
-
-extern bfd *output_bfd;
-
-
-
-static void gldi386v_before_parse()
-{
-#ifndef NOTDEF         /* Cross developing for now */
-  ldfile_add_library_path("/usr/local/lib/386gcc-lib/lib");
-  ldfile_add_library_path("/usr/local/lib/386gcc-lib/usr/lib");
-  ldfile_add_library_path("/usr/local/lib/386gcc-lib/usr/local/lib");
-#endif
-  ldfile_output_architecture = bfd_arch_i386;
-}
-
-
-static void 
-gldi386v_after_parse()
-{
-
-}
-
-static void
-gldi386v_after_allocation()
-{
-
-}
-
-static void
-gldi386v_before_allocation()
-{
-
-}
-
-static void
-gldi386v_set_output_arch()
-{
-  /* Set the output architecture and machine if possible */
-  unsigned long  machine = 0;
-  bfd_set_arch_mach(output_bfd, ldfile_output_architecture, machine);
-}
-
-static char *
-gldi386v_choose_target()
-{
-  char *from_outside = getenv(TARGET_ENVIRON);
-  if (from_outside != (char *)NULL)
-    return from_outside;
-  return GLDi386v_TARGET;
-}
-
-static void
-gldi386v_syslib()
-{
-  info("%S SYSLIB ignored\n");
-}
-
-static void
-gldi386v_hll(ignore)
-char  *ignore;
-{
-  info("%S HLL ignored\n");
-}
-
-static char *gldi386v_script  =  
-#include "ldgldi386v.x"
-;
-
-static char *gldi386v_script_option_Ur  =  
-#include "ldgldi386vUr.x"
-;
-static char *gldi386v_script_option_r  =  
-#include "ldgldi386vr.x"
-;                           
-static char *gldi386v_get_script()
-{                           
-  extern ld_config_type config;
-  if (config.relocateable_output == true &&
-      config.build_constructors == true) {
-    return gldi386v_script_option_Ur;
-  }
-  if (config.relocateable_output) {
-    return gldi386v_script_option_r;
-  }
-       
-  return gldi386v_script;
-}
-struct ld_emulation_xfer_struct ld_gldi386v_emulation = 
-{
-  gldi386v_before_parse,
-  gldi386v_syslib,
-  gldi386v_hll,
-  gldi386v_after_parse,
-  gldi386v_after_allocation,
-  gldi386v_set_output_arch,
-  gldi386v_choose_target,
-  gldi386v_before_allocation,
-  gldi386v_get_script,
-};
-
diff --git a/ld/ldgldi386v.sc b/ld/ldgldi386v.sc
deleted file mode 100755 (executable)
index 9805f39..0000000
+++ /dev/null
@@ -1,26 +0,0 @@
-/* $Id$ 
-*/
-
-OUTPUT_FORMAT("i386coff")
-
-ENTRY(_start)
-SECTIONS                               
-{      
-  .text 0x000000d0 : {
-    *(.init)                           
-    *(.text)   
-    *(.fini)           
-    etext  =  .; 
-  }
-  .data ((ADDR(.text) + SIZEOF(.text)) & 0x0fff) + ALIGN(0x00400000) : {
-       *(.data)                                
-       edata  =  .;                    
-  }
-  .bss   (SIZEOF(.data) + ADDR(.data)) : {
-       *(.bss)                         
-       [COMMON]                                
-       end = ALIGN(0x8);
-  } 
-  .comment : { *(.comment) }
-}
-
diff --git a/ld/ldgldi386vUr.sc b/ld/ldgldi386vUr.sc
deleted file mode 100755 (executable)
index 9805f39..0000000
+++ /dev/null
@@ -1,26 +0,0 @@
-/* $Id$ 
-*/
-
-OUTPUT_FORMAT("i386coff")
-
-ENTRY(_start)
-SECTIONS                               
-{      
-  .text 0x000000d0 : {
-    *(.init)                           
-    *(.text)   
-    *(.fini)           
-    etext  =  .; 
-  }
-  .data ((ADDR(.text) + SIZEOF(.text)) & 0x0fff) + ALIGN(0x00400000) : {
-       *(.data)                                
-       edata  =  .;                    
-  }
-  .bss   (SIZEOF(.data) + ADDR(.data)) : {
-       *(.bss)                         
-       [COMMON]                                
-       end = ALIGN(0x8);
-  } 
-  .comment : { *(.comment) }
-}
-
diff --git a/ld/ldgldi386vr.sc b/ld/ldgldi386vr.sc
deleted file mode 100755 (executable)
index 9805f39..0000000
+++ /dev/null
@@ -1,26 +0,0 @@
-/* $Id$ 
-*/
-
-OUTPUT_FORMAT("i386coff")
-
-ENTRY(_start)
-SECTIONS                               
-{      
-  .text 0x000000d0 : {
-    *(.init)                           
-    *(.text)   
-    *(.fini)           
-    etext  =  .; 
-  }
-  .data ((ADDR(.text) + SIZEOF(.text)) & 0x0fff) + ALIGN(0x00400000) : {
-       *(.data)                                
-       edata  =  .;                    
-  }
-  .bss   (SIZEOF(.data) + ADDR(.data)) : {
-       *(.bss)                         
-       [COMMON]                                
-       end = ALIGN(0x8);
-  } 
-  .comment : { *(.comment) }
-}
-
diff --git a/ld/ldgldm68kv.c b/ld/ldgldm68kv.c
deleted file mode 100755 (executable)
index 1f83d98..0000000
+++ /dev/null
@@ -1,144 +0,0 @@
-/* Copyright (C) 1991 Free Software Foundation, Inc.
-
-This file is part of GLD, the Gnu Linker.
-
-GLD is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 1, or (at your option)
-any later version.
-
-GLD is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with GLD; see the file COPYING.  If not, write to
-the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-/*
- *  $Id$
-*/
-
-/* 
- * emulate the original gld running on an m68kv system
- *
- *  Written by David Wood @ New York University 
- */
-
-
-#include "sysdep.h"
-#include "bfd.h"
-
-#include "ld.h"
-#include "config.h"
-#include "ldemul.h"
-#include "ldfile.h"
-#include "ldmisc.h"
-
-extern  boolean lang_float_flag;
-
-
-extern enum bfd_architecture ldfile_output_architecture;
-extern unsigned long ldfile_output_machine;
-extern char *ldfile_output_machine_name;
-
-extern bfd *output_bfd;
-
-
-
-static void gldm68kv_before_parse()
-{
-#ifndef NOTDEF         /* Cross developing for now */
-  ldfile_add_library_path("/usr/triton/lib/68kgcc-lib/lib");
-  ldfile_add_library_path("/usr/triton/lib/68kgcc-lib/usr/lib");
-  ldfile_add_library_path("/usr/triton/lib/68kgcc-lib/usr/local/lib");
-#endif
-  ldfile_output_architecture = bfd_arch_m68k;
-}
-
-
-static void 
-gldm68kv_after_parse()
-{
-
-}
-
-static void
-gldm68kv_after_allocation()
-{
-
-}
-
-static void
-gldm68kv_before_allocation()
-{
-
-}
-
-static void
-gldm68kv_set_output_arch()
-{
-  /* Set the output architecture and machine if possible */
-  unsigned long  machine = 0;
-  bfd_set_arch_mach(output_bfd, ldfile_output_architecture, machine);
-}
-
-static char *
-gldm68kv_choose_target()
-{
-  char *from_outside = getenv(TARGET_ENVIRON);
-  if (from_outside != (char *)NULL)
-    return from_outside;
-  return GLDm68kv_TARGET;
-}
-
-static void
-gldm68kv_syslib()
-{
-  info("%S SYSLIB ignored\n");
-}
-
-static void
-gldm68kv_hll(ignore)
-char  *ignore;
-{
-  info("%S HLL ignored\n");
-}
-
-static char *gldm68kv_script  =  
-#include "ldgldm68kv.x"
-;
-
-static char *gldm68kv_script_option_Ur  =  
-#include "ldgldm68kvUr.x"
-;
-static char *gldm68kv_script_option_r  =  
-#include "ldgldm68kvr.x"
-;                           
-static char *gldm68kv_get_script()
-{                           
-  extern ld_config_type config;
-  if (config.relocateable_output == true &&
-      config.build_constructors == true) {
-    return gldm68kv_script_option_Ur;
-  }
-  if (config.relocateable_output) {
-    return gldm68kv_script_option_r;
-  }
-       
-  return gldm68kv_script;
-}
-struct ld_emulation_xfer_struct ld_gldm68kv_emulation = 
-{
-  gldm68kv_before_parse,
-  gldm68kv_syslib,
-  gldm68kv_hll,
-  gldm68kv_after_parse,
-  gldm68kv_after_allocation,
-  gldm68kv_set_output_arch,
-  gldm68kv_choose_target,
-  gldm68kv_before_allocation,
-  gldm68kv_get_script,
-};
-
diff --git a/ld/ldgldm68kv.sc b/ld/ldgldm68kv.sc
deleted file mode 100755 (executable)
index 2e052cd..0000000
+++ /dev/null
@@ -1,24 +0,0 @@
-/* $Id$
-*/
-
-OUTPUT_FORMAT("m68kvcoff")
-
-ENTRY(__startup)
-SECTIONS
-{
-  .text 0x001000a8 : {
-    *(.init)
-    *(.text)
-    *(.fini)
-    _etext  =  .;
-  }
-  .data ((ADDR(.text) + SIZEOF(.text)) % 0x2000) + ALIGN(0x00200000) : {
-       *(.data)
-       _edata  =  .;
-  }
-  .bss   (SIZEOF(.data) + ADDR(.data)) : {
-       *(.bss)
-       [COMMON]
-       _end = ALIGN(0x8);
-  }
-}
diff --git a/ld/ldgldm68kvUr.sc b/ld/ldgldm68kvUr.sc
deleted file mode 100755 (executable)
index 2e052cd..0000000
+++ /dev/null
@@ -1,24 +0,0 @@
-/* $Id$
-*/
-
-OUTPUT_FORMAT("m68kvcoff")
-
-ENTRY(__startup)
-SECTIONS
-{
-  .text 0x001000a8 : {
-    *(.init)
-    *(.text)
-    *(.fini)
-    _etext  =  .;
-  }
-  .data ((ADDR(.text) + SIZEOF(.text)) % 0x2000) + ALIGN(0x00200000) : {
-       *(.data)
-       _edata  =  .;
-  }
-  .bss   (SIZEOF(.data) + ADDR(.data)) : {
-       *(.bss)
-       [COMMON]
-       _end = ALIGN(0x8);
-  }
-}
diff --git a/ld/ldgldm68kvr.sc b/ld/ldgldm68kvr.sc
deleted file mode 100755 (executable)
index 2e052cd..0000000
+++ /dev/null
@@ -1,24 +0,0 @@
-/* $Id$
-*/
-
-OUTPUT_FORMAT("m68kvcoff")
-
-ENTRY(__startup)
-SECTIONS
-{
-  .text 0x001000a8 : {
-    *(.init)
-    *(.text)
-    *(.fini)
-    _etext  =  .;
-  }
-  .data ((ADDR(.text) + SIZEOF(.text)) % 0x2000) + ALIGN(0x00200000) : {
-       *(.data)
-       _edata  =  .;
-  }
-  .bss   (SIZEOF(.data) + ADDR(.data)) : {
-       *(.bss)
-       [COMMON]
-       _end = ALIGN(0x8);
-  }
-}
diff --git a/ld/ldgldm88kbcs.c b/ld/ldgldm88kbcs.c
deleted file mode 100755 (executable)
index f3e9d96..0000000
+++ /dev/null
@@ -1,142 +0,0 @@
-/* Copyright (C) 1991 Free Software Foundation, Inc.
-
-This file is part of GLD, the Gnu Linker.
-
-GLD is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 1, or (at your option)
-any later version.
-
-GLD is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with GLD; see the file COPYING.  If not, write to
-the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-/*
- *  $Id$
- *
-*/
-
-/* 
- *  Written by Steve Chamberlain steve@cygnus.com
- */
-
-
-#include "sysdep.h"
-#include "bfd.h"
-
-
-#include "ld.h"
-#include "config.h"
-#include "ldemul.h"
-#include "ldfile.h"
-#include "ldmisc.h"
-
-extern  boolean lang_float_flag;
-
-
-extern enum bfd_architecture ldfile_output_architecture;
-extern unsigned long ldfile_output_machine;
-extern char *ldfile_output_machine_name;
-
-extern bfd *output_bfd;
-
-
-
-static void gldm88kbcs_before_parse()
-{
-  extern char lprefix;
-  lprefix = '@';
-}
-
-
-static void 
-gldm88kbcs_after_parse()
-{
-
-}
-
-static void
-gldm88kbcs_after_allocation()
-{
-
-}
-
-static void
-gldm88kbcs_before_allocation()
-{
-
-}
-
-
-static void
-gldm88kbcs_set_output_arch()
-{
-  /* Set the output architecture and machine if possible */
-  bfd_set_arch_mach(output_bfd, ldfile_output_architecture, ldfile_output_machine);
-}
-
-static char *
-gldm88kbcs_choose_target()
-{
-  char *from_outside = getenv(TARGET_ENVIRON);
-  if (from_outside != (char *)NULL)
-    return from_outside;
-  return GLDM88KBCS_TARGET;
-}
-
-static void
-gldm88kbcs_syslib()
-{
-  info("%S SYSLIB ignored\n");
-}
-
-static void
-gldm88kbcs_hll(ignore)
-char  *ignore;
-{
-  info("%S HLL ignored\n");
-}
-
-static char *gldm88kbcs_script = 
-#include "ldgldm88kbcs.x"
-;
-
-static char *gldm88kbcs_script_option_Ur  =  
-#include "ldgldm88kbcsUr.x"
-;
-
-static char *gldm88kbcs_script_option_r  =  
-#include "ldgldm88kbcsr.x"
-;           
-                            
-static char *gldm88kbcs_get_script()
-{                           
-  extern ld_config_type config;
-  if (config.relocateable_output == true &&
-      config.build_constructors == true) {
-    return gldm88kbcs_script_option_Ur;
-  }
-  if (config.relocateable_output) {
-    return gldm88kbcs_script_option_r;
-  }
-       
-  return gldm88kbcs_script;
-}
-struct ld_emulation_xfer_struct ld_gldm88kbcs_emulation = 
-{
-  gldm88kbcs_before_parse,
-  gldm88kbcs_syslib,
-  gldm88kbcs_hll,
-  gldm88kbcs_after_parse,
-  gldm88kbcs_after_allocation,
-  gldm88kbcs_set_output_arch,
-  gldm88kbcs_choose_target,
-  gldm88kbcs_before_allocation,
-  gldm88kbcs_get_script,
-};
-
diff --git a/ld/ldgldm88kbcs.sc b/ld/ldgldm88kbcs.sc
deleted file mode 100755 (executable)
index c4cb37e..0000000
+++ /dev/null
@@ -1,40 +0,0 @@
-TARGET(m88kbcs)
-OUTPUT_FORMAT(m88kbcs)
-OUTPUT_ARCH(m88k)
-ENTRY(__start)
-SEARCH_DIR(/lib)                       
-SEARCH_DIR(/usr/lib)                   
-SEARCH_DIR(/usr/local/lib)             
-SECTIONS                               
-{                                      
-  .text 0x10000 + SIZEOF_HEADERS :
-    {                                  
-      __.text.start = .;
-      __.init.start = .;
-      LONG(0xf400c001) 
-      __.init.end = .;
-      *(.text)                                 
-      __.tdesc_start = .;
-      *(.tdesc)                        
-      __.text_end = .; 
-      __.initp.start = .;
-      __.initp.end =.;
-
-      _etext =.;
-    }                                          
-  .data SIZEOF(.text) + ADDR(.text) + 0x400000:
-    {                                  
-      *(.data)                                 
-       _edata  =  .;                   
-    }                                          
-  .bss   SIZEOF(.data) + ADDR(.data) : 
-    {          
-      *(.bss)  
-      [COMMON]         
-      _end = .;                                
-      ___end = .;
-    }                                  
-}
-
-
-
diff --git a/ld/ldgldm88kbcs.script b/ld/ldgldm88kbcs.script
deleted file mode 100755 (executable)
index c4cb37e..0000000
+++ /dev/null
@@ -1,40 +0,0 @@
-TARGET(m88kbcs)
-OUTPUT_FORMAT(m88kbcs)
-OUTPUT_ARCH(m88k)
-ENTRY(__start)
-SEARCH_DIR(/lib)                       
-SEARCH_DIR(/usr/lib)                   
-SEARCH_DIR(/usr/local/lib)             
-SECTIONS                               
-{                                      
-  .text 0x10000 + SIZEOF_HEADERS :
-    {                                  
-      __.text.start = .;
-      __.init.start = .;
-      LONG(0xf400c001) 
-      __.init.end = .;
-      *(.text)                                 
-      __.tdesc_start = .;
-      *(.tdesc)                        
-      __.text_end = .; 
-      __.initp.start = .;
-      __.initp.end =.;
-
-      _etext =.;
-    }                                          
-  .data SIZEOF(.text) + ADDR(.text) + 0x400000:
-    {                                  
-      *(.data)                                 
-       _edata  =  .;                   
-    }                                          
-  .bss   SIZEOF(.data) + ADDR(.data) : 
-    {          
-      *(.bss)  
-      [COMMON]         
-      _end = .;                                
-      ___end = .;
-    }                                  
-}
-
-
-
diff --git a/ld/ldgldm88kbcsUr.sc b/ld/ldgldm88kbcsUr.sc
deleted file mode 100755 (executable)
index 8d3f12b..0000000
+++ /dev/null
@@ -1,31 +0,0 @@
-SCRIPT 
-SEARCH_DIR(/lib)                       
-SEARCH_DIR(/usr/lib)                   
-SEARCH_DIR(/usr/local/lib)             
-SECTIONS                               
-{                                      
-  .text 0:                             
-  {                                    
-   CREATE_OBJECT_SYMBOLS                
-    *(.text)                           
-    }                                  
-  .data SIZEOF(.text) + ADDR(.text) :  
-  {                                    
-    *(.data)                           
-    ___DTOR_LIST__ = . ;                       
-    LONG((___CTOR_LIST__ - .) / 4 -2)          
-    *(___DTOR_LIST__)                   
-    LONG(0)                             
-    ___CTOR_LIST__ = . ;                       
-    LONG((___end_list__  - .) / 4 -2)     
-    *(___CTOR_LIST__)                   
-    LONG(0)                             
-    ___end_list__  =  . ;                      
-    }                                  
-  .bss SIZEOF(.data) + ADDR(.data) :   
-  {                                    
-    *(.bss)                            
-   [COMMON]                            
-    }                                  
-}                                      
-ENDSCRIPT 
diff --git a/ld/ldgldm88kbcsUr.script b/ld/ldgldm88kbcsUr.script
deleted file mode 100755 (executable)
index 8d3f12b..0000000
+++ /dev/null
@@ -1,31 +0,0 @@
-SCRIPT 
-SEARCH_DIR(/lib)                       
-SEARCH_DIR(/usr/lib)                   
-SEARCH_DIR(/usr/local/lib)             
-SECTIONS                               
-{                                      
-  .text 0:                             
-  {                                    
-   CREATE_OBJECT_SYMBOLS                
-    *(.text)                           
-    }                                  
-  .data SIZEOF(.text) + ADDR(.text) :  
-  {                                    
-    *(.data)                           
-    ___DTOR_LIST__ = . ;                       
-    LONG((___CTOR_LIST__ - .) / 4 -2)          
-    *(___DTOR_LIST__)                   
-    LONG(0)                             
-    ___CTOR_LIST__ = . ;                       
-    LONG((___end_list__  - .) / 4 -2)     
-    *(___CTOR_LIST__)                   
-    LONG(0)                             
-    ___end_list__  =  . ;                      
-    }                                  
-  .bss SIZEOF(.data) + ADDR(.data) :   
-  {                                    
-    *(.bss)                            
-   [COMMON]                            
-    }                                  
-}                                      
-ENDSCRIPT 
diff --git a/ld/ldgldm88kbcsr.sc b/ld/ldgldm88kbcsr.sc
deleted file mode 100755 (executable)
index a3b39fe..0000000
+++ /dev/null
@@ -1,20 +0,0 @@
-SEARCH_DIR(/lib)                       
-SEARCH_DIR(/usr/lib)                   
-SEARCH_DIR(/usr/local/lib)             
-SECTIONS                               
-{                                      
-  .text 0:                             
-  {                                    
-   CREATE_OBJECT_SYMBOLS                
-    *(.text)                           
-    }                                  
-  .data SIZEOF(.text) + ADDR(.text) :  
-  {                                    
-    *(.data)                           
-    }                                  
-  .bss SIZEOF(.data) + ADDR(.data) :   
-  {                                    
-    *(.bss)                            
-   [COMMON]                            
-    }                                  
-}                                      
diff --git a/ld/ldgldm88kbcsr.script b/ld/ldgldm88kbcsr.script
deleted file mode 100755 (executable)
index a3b39fe..0000000
+++ /dev/null
@@ -1,20 +0,0 @@
-SEARCH_DIR(/lib)                       
-SEARCH_DIR(/usr/lib)                   
-SEARCH_DIR(/usr/local/lib)             
-SECTIONS                               
-{                                      
-  .text 0:                             
-  {                                    
-   CREATE_OBJECT_SYMBOLS                
-    *(.text)                           
-    }                                  
-  .data SIZEOF(.text) + ADDR(.text) :  
-  {                                    
-    *(.data)                           
-    }                                  
-  .bss SIZEOF(.data) + ADDR(.data) :   
-  {                                    
-    *(.bss)                            
-   [COMMON]                            
-    }                                  
-}                                      
diff --git a/ld/ldgldr.sc b/ld/ldgldr.sc
deleted file mode 100755 (executable)
index a3b39fe..0000000
+++ /dev/null
@@ -1,20 +0,0 @@
-SEARCH_DIR(/lib)                       
-SEARCH_DIR(/usr/lib)                   
-SEARCH_DIR(/usr/local/lib)             
-SECTIONS                               
-{                                      
-  .text 0:                             
-  {                                    
-   CREATE_OBJECT_SYMBOLS                
-    *(.text)                           
-    }                                  
-  .data SIZEOF(.text) + ADDR(.text) :  
-  {                                    
-    *(.data)                           
-    }                                  
-  .bss SIZEOF(.data) + ADDR(.data) :   
-  {                                    
-    *(.bss)                            
-   [COMMON]                            
-    }                                  
-}                                      
diff --git a/ld/ldgldr.script b/ld/ldgldr.script
deleted file mode 100755 (executable)
index a3b39fe..0000000
+++ /dev/null
@@ -1,20 +0,0 @@
-SEARCH_DIR(/lib)                       
-SEARCH_DIR(/usr/lib)                   
-SEARCH_DIR(/usr/local/lib)             
-SECTIONS                               
-{                                      
-  .text 0:                             
-  {                                    
-   CREATE_OBJECT_SYMBOLS                
-    *(.text)                           
-    }                                  
-  .data SIZEOF(.text) + ADDR(.text) :  
-  {                                    
-    *(.data)                           
-    }                                  
-  .bss SIZEOF(.data) + ADDR(.data) :   
-  {                                    
-    *(.bss)                            
-   [COMMON]                            
-    }                                  
-}                                      
diff --git a/ld/ldlnk960.c b/ld/ldlnk960.c
deleted file mode 100755 (executable)
index 22d04fc..0000000
+++ /dev/null
@@ -1,287 +0,0 @@
-/* intel coff loader emulation specific stuff
-   Copyright (C) 1991 Free Software Foundation, Inc.
-   Written by Steve Chamberlain steve@cygnus.com
-
-This file is part of GLD, the Gnu Linker.
-
-GLD is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2, or (at your option)
-any later version.
-
-GLD is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with GLD; see the file COPYING.  If not, write to
-the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-/*
-   $Id$ 
-*/
-
-#include "bfd.h"
-#include "sysdep.h"
-
-/*#include "archures.h"*/
-#include "ld.h"
-#include "config.h"
-#include "ldemul.h"
-#include "ldmisc.h"
-#include "ldlang.h"
-#include "ldfile.h"
-
-extern  boolean lang_float_flag;
-extern bfd *output_bfd;
-
-
-
-extern enum bfd_architecture ldfile_output_architecture;
-extern unsigned long ldfile_output_machine;
-extern char *ldfile_output_machine_name;
-
-
-typedef struct lib_list {
-  char *name;
-  struct lib_list *next;
-} lib_list_type;
-
-static lib_list_type *hll_list;
-static lib_list_type **hll_list_tail = &hll_list;
-
-static lib_list_type *syslib_list;
-static lib_list_type **syslib_list_tail = &syslib_list;
-
-
-static void
-append(list, name)
-lib_list_type ***list;
-char *name;
-{
-  lib_list_type *element = 
-    (lib_list_type *)(ldmalloc(sizeof(lib_list_type)));
-
-  element->name = name;
-  element->next = (lib_list_type *)NULL;
-  **list = element;
-  *list = &element->next;
-
-}
-
-static boolean had_hll = false;
-static boolean had_hll_name = false;
-static void
-lnk960_hll(name)
-char *name;
-{
-  had_hll = true;
-  if (name != (char *)NULL) {
-    had_hll_name = true;
-    append(&hll_list_tail, name);
-  }
-}
-
-static void 
-lnk960_syslib(name)
-char *name;
-{
-  append(&syslib_list_tail,name);
-}
-
-
-
-#ifdef GNU960
-
-static void 
-lnk960_before_parse()
-{
-  static char *env_variables[] = { "G960LIB", "G960BASE", 0 };
-  char **p;
-  char *env ;
-
-  for ( p = env_variables; *p; p++ ){
-    env =  (char *) getenv(*p);
-    if (env) {
-      ldfile_add_library_path(concat(env,"/lib/libcoff",""));
-    }
-  }
-
-  env= (char *) getenv("I960BASE");
-  if ( env ) {
-    ldfile_add_library_path(concat(env,"/lib",""));
-  }
-
-  ldfile_output_architecture = bfd_arch_i960;
-  ldfile_output_machine = bfd_mach_i960_core;
-}
-
-#else  /* not GNU960 */
-
-static void 
-lnk960_before_parse()
-{
-  char *name = getenv("I960BASE");
-
-  if (name == (char *)NULL) {
-    name = getenv("G960BASE");
-    if (name == (char *)NULL) {
-      einfo("%P%F I960BASE and G960BASE not set\n");
-    }
-  }
-
-
-  ldfile_add_library_path(concat(name,"/lib",""));
-  ldfile_output_architecture = bfd_arch_i960;
-  ldfile_output_machine = bfd_mach_i960_core;
-}
-
-#endif /* GNU960 */
-
-
-static void
-add_on(list, search)
-lib_list_type *list;
-lang_input_file_enum_type search;
-{
-  while (list) {
-    lang_add_input_file(list->name,
-                       search,
-                       (char *)NULL);
-    list = list->next;
-  }
-}
-static void lnk960_after_parse()
-{
-
-  /* If there has been no arch, default to -KB */
-  if (ldfile_output_machine_name[0] ==0) {
-    ldfile_add_arch("KB");
-  }
-
-  /* if there has been no hll list then add our own */
-  
-  if(had_hll && !had_hll_name) {
-    append(&hll_list_tail,"cg");
-    if (ldfile_output_machine == bfd_mach_i960_ka_sa ||
-       ldfile_output_machine == bfd_mach_i960_ca) {
-        {
-         append(&hll_list_tail,"fpg");
-        }
-    }
-  }
-  
-  add_on(hll_list, lang_input_file_is_l_enum);
-  add_on(syslib_list, lang_input_file_is_search_file_enum);
-}
-
-static void
-lnk960_before_allocation()
-{
-}
-static void
-lnk960_after_allocation()
-{
-  extern ld_config_type config;
-  if (config.relocateable_output == false) {
-    lang_abs_symbol_at_end_of(".text","_etext");
-    lang_abs_symbol_at_end_of(".data","_edata");
-    lang_abs_symbol_at_beginning_of(".bss","_bss_start");
-    lang_abs_symbol_at_end_of(".bss","_end");
-  }
-}
-
-
-static struct
- {
-   unsigned  long number;
-   char *name; 
- }
-machine_table[] = {
-       bfd_mach_i960_core      ,"CORE",
-       bfd_mach_i960_kb_sb     ,"KB",
-       bfd_mach_i960_kb_sb     ,"SB",
-       bfd_mach_i960_mc        ,"MC",
-       bfd_mach_i960_xa        ,"XA",
-       bfd_mach_i960_ca        ,"CA",
-       bfd_mach_i960_ka_sa     ,"KA",
-       bfd_mach_i960_ka_sa     ,"SA",
-
-       bfd_mach_i960_core      ,"core",
-       bfd_mach_i960_kb_sb     ,"kb",
-       bfd_mach_i960_kb_sb     ,"sb",
-       bfd_mach_i960_mc        ,"mc",
-       bfd_mach_i960_xa        ,"xa",
-       bfd_mach_i960_ca        ,"ca",
-       bfd_mach_i960_ka_sa     ,"ka",
-       bfd_mach_i960_ka_sa     ,"sa",
-       0,(char *)NULL
-};
-
-static void
-lnk960_set_output_arch()
-{
-  /* Set the output architecture and machine if possible */
-  unsigned int i;
-  ldfile_output_machine = bfd_mach_i960_core;
-  for (i= 0; machine_table[i].name != (char*)NULL; i++) {
-    if (strcmp(ldfile_output_machine_name,machine_table[i].name)==0) {
-      ldfile_output_machine = machine_table[i].number;
-      break;
-    }
-  }
-  bfd_set_arch_mach(output_bfd, ldfile_output_architecture, ldfile_output_machine);
-}
-
-static char *
-lnk960_choose_target()
-{
-#ifdef GNU960
-
-  return bfd_make_targ_name(BFD_COFF_FORMAT, 0);
-
-#else
-
-  char *from_outside = getenv(TARGET_ENVIRON);
-  if (from_outside != (char *)NULL)
-    return from_outside;
-#ifdef LNK960_LITTLE
-  return LNK960_TARGET_LITTLE
-#else
-  return LNK960_TARGET;
-#endif
-#endif
-
-}
-
-/* The default script if none is offered */
-static char *lnk960_script = 
-#include "ldlnk960.x"
-;
-
-
-static char *lnk960_script_relocateable = 
-#include "ldlnk960.xr"
-;
-
-static char *lnk960_get_script()
-{
-  extern ld_config_type config;
-  if (config.relocateable_output) {
-    return lnk960_script_relocateable;
-  }
-  return lnk960_script;
-}
-struct ld_emulation_xfer_struct ld_lnk960_emulation = 
-{
-  lnk960_before_parse,
-  lnk960_syslib,
-  lnk960_hll,
-  lnk960_after_parse,
-  lnk960_after_allocation,
-  lnk960_set_output_arch,
-  lnk960_choose_target,
-  lnk960_before_allocation,
-  lnk960_get_script,
-};
diff --git a/ld/ldlnk960.sc b/ld/ldlnk960.sc
deleted file mode 100755 (executable)
index 409d1b9..0000000
+++ /dev/null
@@ -1,21 +0,0 @@
-
-SECTIONS 
-{ 
-  .text : 
-  { 
-    *(.text) 
-    }  
-_etext = . ;
-  .data  SIZEOF(.text) + ADDR(.text):
-  { 
-    *(.data) 
-    }  
-_edata = .; 
-  .bss   SIZEOF(.data) + ADDR(.data) :    
-  { 
-   _bss_start = . ;
-   *(.bss)  
-   *(COMMON)
-    } 
-_end = . ; 
-} 
diff --git a/ld/ldlnk960.script b/ld/ldlnk960.script
deleted file mode 100755 (executable)
index f498412..0000000
+++ /dev/null
@@ -1,21 +0,0 @@
-
-SECTIONS 
-{ 
-  .text : 
-  { 
-    *(.text) 
-    }  
-_etext = . ;
-  .data  SIZEOF(.text) + ADDR(.text):
-  { 
-    *(.data) 
-    }  
-_edata = .; 
-  .bss   SIZEOF(.data) + ADDR(.data) :    
-  { 
-   _bss_start = . ;
-   *(.bss)  
-   [COMMON] 
-    } 
-_end = . ; 
-} 
diff --git a/ld/ldlnk960r.sc b/ld/ldlnk960r.sc
deleted file mode 100755 (executable)
index daf59bb..0000000
+++ /dev/null
@@ -1,17 +0,0 @@
-SECTIONS 
-{ 
-  .text 0:
-  { 
-    *(.text) 
-    }  
-  .data SIZEOF(.text) + ADDR(.text):
-  { 
-    *(.data) 
-    }  
-  .bss   SIZEOF(.data) + ADDR(.data) :    
-  { 
-   *(.bss)  
-   [COMMON] 
-    } 
-} 
-
diff --git a/ld/ldlnk960r.script b/ld/ldlnk960r.script
deleted file mode 100755 (executable)
index daf59bb..0000000
+++ /dev/null
@@ -1,17 +0,0 @@
-SECTIONS 
-{ 
-  .text 0:
-  { 
-    *(.text) 
-    }  
-  .data SIZEOF(.text) + ADDR(.text):
-  { 
-    *(.data) 
-    }  
-  .bss   SIZEOF(.data) + ADDR(.data) :    
-  { 
-   *(.bss)  
-   [COMMON] 
-    } 
-} 
-
diff --git a/ld/ldm88k.c b/ld/ldm88k.c
deleted file mode 100755 (executable)
index c354ccb..0000000
+++ /dev/null
@@ -1,142 +0,0 @@
-/* Copyright (C) 1991 Free Software Foundation, Inc.
-
-This file is part of GLD, the Gnu Linker.
-
-GLD is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 1, or (at your option)
-any later version.
-
-GLD is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with GLD; see the file COPYING.  If not, write to
-the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-/*
- *  $Id$
- *
-*/
-
-/* 
- *  Written by Steve Chamberlain steve@cygnus.com
- */
-
-
-#include "sysdep.h"
-#include "bfd.h"
-
-
-#include "ld.h"
-#include "config.h"
-#include "ldemul.h"
-#include "ldfile.h"
-#include "ldmisc.h"
-
-extern  boolean lang_float_flag;
-
-
-extern enum bfd_architecture ldfile_output_architecture;
-extern unsigned long ldfile_output_machine;
-extern char *ldfile_output_machine_name;
-
-extern bfd *output_bfd;
-
-
-
-static void gldm88kbcs_before_parse()
-{
-  extern char lprefix;
-  lprefix = '@';
-}
-
-
-static void 
-gldm88kbcs_after_parse()
-{
-
-}
-
-static void
-gldm88kbcs_after_allocation()
-{
-
-}
-
-static void
-gldm88kbcs_before_allocation()
-{
-
-}
-
-
-static void
-gldm88kbcs_set_output_arch()
-{
-  /* Set the output architecture and machine if possible */
-  bfd_set_arch_mach(output_bfd, ldfile_output_architecture, ldfile_output_machine);
-}
-
-static char *
-gldm88kbcs_choose_target()
-{
-  char *from_outside = getenv(TARGET_ENVIRON);
-  if (from_outside != (char *)NULL)
-    return from_outside;
-  return GLDM88KBCS_TARGET;
-}
-
-static void
-gldm88kbcs_syslib()
-{
-  info("%S SYSLIB ignored\n");
-}
-
-static void
-gldm88kbcs_hll(ignore)
-char  *ignore;
-{
-  info("%S HLL ignored\n");
-}
-
-static char *gldm88kbcs_script = 
-#include "ldm88k.x"
-;
-
-static char *gldm88kbcs_script_option_Ur  =  
-#include "ldm88kUr.x"
-;
-
-static char *gldm88kbcs_script_option_r  =  
-#include "ldm88kr.x"
-;           
-                            
-static char *gldm88kbcs_get_script()
-{                           
-  extern ld_config_type config;
-  if (config.relocateable_output == true &&
-      config.build_constructors == true) {
-    return gldm88kbcs_script_option_Ur;
-  }
-  if (config.relocateable_output) {
-    return gldm88kbcs_script_option_r;
-  }
-       
-  return gldm88kbcs_script;
-}
-struct ld_emulation_xfer_struct ld_gldm88kbcs_emulation = 
-{
-  gldm88kbcs_before_parse,
-  gldm88kbcs_syslib,
-  gldm88kbcs_hll,
-  gldm88kbcs_after_parse,
-  gldm88kbcs_after_allocation,
-  gldm88kbcs_set_output_arch,
-  gldm88kbcs_choose_target,
-  gldm88kbcs_before_allocation,
-  gldm88kbcs_get_script,
-};
-
diff --git a/ld/ldm88k.sc b/ld/ldm88k.sc
deleted file mode 100755 (executable)
index 1e0203f..0000000
+++ /dev/null
@@ -1,52 +0,0 @@
-TARGET(m88kbcs)
-OUTPUT_FORMAT(m88kbcs)
-OUTPUT_ARCH(m88k)
-ENTRY(__start)
-SEARCH_DIR(/lib)                       
-SEARCH_DIR(/usr/lib)                   
-SEARCH_DIR(/usr/local/lib)             
-SECTIONS                               
-{                                      
-  .text 0x10000 + SIZEOF_HEADERS :
-    {
-      CREATE_OBJECT_SYMBOLS
-      /* If relocating */
-      __.text.start = .;
-      __.init.start = .;
-      LONG(0xf400c001) 
-      __.init.end = .;
-     /* End if relocating */
-      *(.text)                                 
-      /* If relocating */
-      __.tdesc_start = .;
-      *(.tdesc)                        
-      __.text_end = .; 
-      __.initp.start = .;
-      __.initp.end =.;
-
-      _etext =.;
-     /* End if relocating */
-    }                                          
-  .data SIZEOF(.text) + ADDR(.text) + 0x400000:
-    {                                  
-      *(.data)
-       __CTOR_LIST__ = .;
-       *(CTOR)
-       LONG(0);
-       __DTOR_LIST__ = . ;
-       *(DTOR)
-       LONG(0);
-       *(.comment)
-      _edata  =  .;                    
-    }                                          
-  .bss   SIZEOF(.data) + ADDR(.data) : 
-    {          
-      *(.bss)  
-      *(COMMON)        
-      _end = .;                                
-      ___end = .;
-    }                                  
-}
-
-
-
diff --git a/ld/ldm88kUr.sc b/ld/ldm88kUr.sc
deleted file mode 100755 (executable)
index 8d3f12b..0000000
+++ /dev/null
@@ -1,31 +0,0 @@
-SCRIPT 
-SEARCH_DIR(/lib)                       
-SEARCH_DIR(/usr/lib)                   
-SEARCH_DIR(/usr/local/lib)             
-SECTIONS                               
-{                                      
-  .text 0:                             
-  {                                    
-   CREATE_OBJECT_SYMBOLS                
-    *(.text)                           
-    }                                  
-  .data SIZEOF(.text) + ADDR(.text) :  
-  {                                    
-    *(.data)                           
-    ___DTOR_LIST__ = . ;                       
-    LONG((___CTOR_LIST__ - .) / 4 -2)          
-    *(___DTOR_LIST__)                   
-    LONG(0)                             
-    ___CTOR_LIST__ = . ;                       
-    LONG((___end_list__  - .) / 4 -2)     
-    *(___CTOR_LIST__)                   
-    LONG(0)                             
-    ___end_list__  =  . ;                      
-    }                                  
-  .bss SIZEOF(.data) + ADDR(.data) :   
-  {                                    
-    *(.bss)                            
-   [COMMON]                            
-    }                                  
-}                                      
-ENDSCRIPT 
diff --git a/ld/ldm88kr.sc b/ld/ldm88kr.sc
deleted file mode 100755 (executable)
index a3b39fe..0000000
+++ /dev/null
@@ -1,20 +0,0 @@
-SEARCH_DIR(/lib)                       
-SEARCH_DIR(/usr/lib)                   
-SEARCH_DIR(/usr/local/lib)             
-SECTIONS                               
-{                                      
-  .text 0:                             
-  {                                    
-   CREATE_OBJECT_SYMBOLS                
-    *(.text)                           
-    }                                  
-  .data SIZEOF(.text) + ADDR(.text) :  
-  {                                    
-    *(.data)                           
-    }                                  
-  .bss SIZEOF(.data) + ADDR(.data) :   
-  {                                    
-    *(.bss)                            
-   [COMMON]                            
-    }                                  
-}                                      
diff --git a/ld/ldtemplate b/ld/ldtemplate
deleted file mode 100755 (executable)
index 961fbc0..0000000
+++ /dev/null
@@ -1,159 +0,0 @@
-/* NOTE: If there are angle brackets here: <TARGET> then this is a
- * template file (ldtemplate), intended for processing by sed.
- * Otherwise, this file has already been processed by sed,
- * and customized for a particular emulation target.
- * In that DO NOT EDIT the file; edit ldtemplate instead.
- */
-
-/* emulate the original gld for the given <TARGET>
-   Copyright (C) 1991 Free Software Foundation, Inc.
-   Written by Steve Chamberlain steve@cygnus.com
-
-This file is part of GLD, the Gnu Linker.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-/*
- *  $Id:#
- */
-
-#define TARGET_IS_<TARGET>
-
-
-#include "bfd.h"
-#include "sysdep.h"
-#include "ld.h"
-#include "config.h"
-#include "ldemul.h"
-#include "ldfile.h"
-#include "ldmisc.h"
-
-extern  boolean lang_float_flag;
-
-
-extern enum bfd_architecture ldfile_output_architecture;
-extern unsigned long ldfile_output_machine;
-extern char *ldfile_output_machine_name;
-
-extern bfd *output_bfd;
-
-
-
-static void gld<target>_before_parse()
-{
-#ifdef TARGET_IS_M88KBCS
-  extern char lprefix;
-  lprefix = '@';
-#else
-#ifndef TARGET_ /* I.e., if not generic */
-  ldfile_output_architecture = bfd_arch_<arch>;
-#endif
-#endif
-}
-
-
-static void 
-gld<target>_after_parse()
-{
-
-}
-
-static void
-gld<target>_after_allocation()
-{
-
-}
-
-static void
-gld<target>_before_allocation()
-{
-
-}
-
-
-static void
-gld<target>_set_output_arch()
-{
-  /* Set the output architecture and machine if possible */
-  bfd_set_arch_mach(output_bfd,
-                   ldfile_output_architecture, ldfile_output_machine);
-}
-
-static char *
-gld<target>_choose_target()
-{
-  char *from_outside = getenv(TARGET_ENVIRON);
-  if (from_outside != (char *)NULL)
-    return from_outside;
-  return GLD<TARGET>_TARGET;
-}
-
-static void
-gld<target>_syslib()
-{
-  info("%S SYSLIB ignored\n");
-}
-
-static void
-gld<target>_hll(ignore)
-char  *ignore;
-{
-  info("%S HLL ignored\n");
-}
-
-static char *gld<target>_script =  
-#include "<ldtarget>.x"
-;
-static char *gld<target>_script_option_Ur  =  
-#include "<ldtarget>.xu"
-;
-static char *gld<target>_script_option_r  =  
-#include "<ldtarget>.xr"
-;
-static char *gld<target>_script_option_n  =  /* Used with -n flag. */
-#include "<ldtarget>.xn"
-;
-static char *gld<target>_script_option_N  =  /* Used with -N flag. */
-#include "<ldtarget>.xN"
-;
-
-static char *gld<target>_get_script()
-{                           
-  extern ld_config_type config;
-  if (config.relocateable_output == true &&
-      config.build_constructors == true) {
-    return gld<target>_script_option_Ur;
-  }
-  if (config.relocateable_output == true) {
-    return gld<target>_script_option_r;
-  }
-  if (!config.text_read_only)
-    return gld<target>_script_option_N;
-  if (!config.magic_demand_paged)
-    return gld<target>_script_option_n;
-  return gld<target>_script;
-}
-struct ld_emulation_xfer_struct ld_gld<target>_emulation = 
-{
-  gld<target>_before_parse,
-  gld<target>_syslib,
-  gld<target>_hll,
-  gld<target>_after_parse,
-  gld<target>_after_allocation,
-  gld<target>_set_output_arch,
-  gld<target>_choose_target,
-  gld<target>_before_allocation,
-  gld<target>_get_script,
-};
diff --git a/ld/ldvanilla.c b/ld/ldvanilla.c
deleted file mode 100755 (executable)
index 3bd51e6..0000000
+++ /dev/null
@@ -1,118 +0,0 @@
-/* A vanilla emulation with no defaults
-   Copyright (C) 1991 Free Software Foundation, Inc.
-   Written by Steve Chamberlain steve@cygnus.com
-
-This file is part of GLD, the Gnu Linker.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-/*
- *  $Id$ 
- */
-
-#include "bfd.h"
-#include "sysdep.h"
-
-
-#include "ld.h"
-#include "config.h"
-#include "ldemul.h"
-#include "ldfile.h"
-#include "ldmisc.h"
-
-extern  boolean lang_float_flag;
-
-
-extern enum bfd_architecture ldfile_output_architecture;
-extern unsigned long ldfile_output_machine;
-extern char *ldfile_output_machine_name;
-
-extern bfd *output_bfd;
-
-
-
-static void vanilla_before_parse()
-{
-}
-
-
-static void 
-vanilla_after_parse()
-{
-
-}
-
-static void
-vanilla_after_allocation()
-{
-
-}
-
-static void
-vanilla_before_allocation()
-{
-
-}
-
-
-static void
-vanilla_set_output_arch()
-{
-  /* Set the output architecture and machine if possible */
-  unsigned long  machine = 0;
-  bfd_set_arch_mach(output_bfd, ldfile_output_architecture, machine);
-}
-
-static char *
-vanilla_choose_target()
-{
-  char *from_outside = getenv(TARGET_ENVIRON);
-  if (from_outside != (char *)NULL)
-    return from_outside;
-  return VANILLA_TARGET;
-}
-
-static void
-vanilla_syslib()
-{
-  info("%S SYSLIB ignored\n");
-}
-
-static void
-vanilla_hll(ignore)
-char  *ignore;
-{
-  info("%S HLL ignored\n");
-}
-
-                            
-static char *vanilla_get_script()
-{                           
-return "";
-}
-
-struct ld_emulation_xfer_struct ld_vanilla_emulation = 
-{
-  vanilla_before_parse,
-  vanilla_syslib,
-  vanilla_hll,
-  vanilla_after_parse,
-  vanilla_after_allocation,
-  vanilla_set_output_arch,
-  vanilla_choose_target,
-  vanilla_before_allocation,
-  vanilla_get_script,
-};
-
diff --git a/ld/makefile.dos b/ld/makefile.dos
deleted file mode 100755 (executable)
index 7da9ac1..0000000
+++ /dev/null
@@ -1,527 +0,0 @@
-# Makefile for the GNU linker ld (version 2)
-# Copyright (C) 1989-1991 Free Software Foundation, Inc.
-
-# This file is part of GNU ld..
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-# 
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-# 
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-#
-# $Id$
-#
-
-srcdir = .
-
-ddestdir = /usr/local
-
-#version=/`$(unsubdir)/../gcc$(subdir)/gcc -dumpversion`
-version=
-bindir = $(ddestdir)/bin
-gcclibdir = $(ddestdir)/lib/gcc/$(target_alias)$(version)
-
-# Seach path to override the default search path for -lfoo libraries.
-# If LIB_PATH is empty, the ones in the script (if any) are left alone.
-# Otherwise, they are replaced with the ones given in LIB_PATH,
-# which may have the form: LIB_PATH=/lib:/usr/local/lib
-LIB_PATH =
-
-INSTALL = install -c
-INSTALL_PROGRAM = $(INSTALL)
-INSTALL_FILE = $(INSTALL)
-
-BASEDIR        = ../..
-INCLUDE        = $(srcdir)/../include
-INCLUDES = -I. -I$(srcdir)  -I$(INCLUDE) 
-MINUS_G        = -g
-
-# Where to find texinfo.tex to format docn with TeX
-TEXIDIR = $(srcdir)/../texinfo/fsf
-
-# Whether to get roff to put indexing entries on stderr
-TEXI2OPT =
-# You neeed this to generate ld-index.ms (or .mm or .me)
-# TEXI2OPT = -i
-
-MAKEINFO=makeinfo
-TEXI2ROFF=texi2roff
-
-# Which roff program to use to generate index for texi2roff'd doc
-ROFF = groff
-
-BISON = bison
-BISONFLAGS = -v
-
-SCRIPTS = ldgld68k.sc ldgld.sc \
-       ldlnk960.sc ldlnk960r.sc ldgld960.sc \
-       i386aout.sc ldm88k.sc ldglda29k.sc news.sc h8300hds.sc ebmon29k.sc
-
-#### target and host dependent Makefile fragments come in here.
-HDEFINES=-O -D__MSDOS__ -D__GO32__
-TDEFINES=
-CDEFINES=
-###
-
-CFLAGS = $(INCLUDES) $(MINUS_G) $(HDEFINES) $(TDEFINES) $(CDEFINES)
-LINTFLAGS =  $(INCLUDES) $(EXTRA_DEF) 
-
-.SUFFIXES: .y .x .xr .xu .xn .xN .sc .scu .scr .scn
-
-# go directly to ld.new in case this ld isn't capable of
-# linking native object on this host.  It can be renamed on
-# install.
-LD_PROG        = ld.new
-
-# A .sc script file is needed for each emulation mode.
-# sed is used to transform this script into two variant forms:
-# A .scr script is for linking without relocation (-r flag).
-# A .scu script is like .scr, but *do* create constructors.
-# A .scn script is for linking with -N flag (mix text and data on same page).
-# A .scN script is for linking with -N flag (mix text and data on same page).
-# The diference is that segments should (need) not be page aligned.
-
-# A sed pattern to translate .sc to .scu:
-SED_MAKE_RELOC_WITH_CONSTRUCTORS=\
-  -e "/If relocating/,/End if relocating/d" \
-  -e "/=/s/[_a-zA-Z.]* *= .*//g" \
-  -e '/>/s/} *> *[a-zA-Z]*/}/' \
-  -e "/text/s/[.]text .*:/.text :/" \
-  -e "/data/s/[.]data .*:/.data :/"
-# A sed pattern to translate .scu to .scr:
-SED_REMOVE_CONSTRUCTORS= -e /CONSTRUCTORS/d
-
-.sc.scu:
-       sed $(SED_MAKE_RELOC_WITH_CONSTRUCTORS) $< >$*.scu
-.scu.scr:
-       sed $(SED_REMOVE_CONSTRUCTORS) < $< >$*.scr
-
-# Each builtin script file is included as a C string literal.
-# These are generated by the mkscript filter.
-.sc.x:
-       if [ "x"$(LIB_PATH) = "x" ]; then ./mkscript < $< >$*.x ; \
-       else \
-         (sed <$< -e '/SEARCH_DIR(.*)/d' ; \
-         echo $(LIB_PATH) | tr ':' ' ' | sed -e 's/\([^ ][^ ]*\)/SEARCH_DIR(\1);/g';) | ./mkscript >$*.x;\
-       fi
-
-# The .xn script is used if the -n flag is given (write-protect text)..
-# Sunos starts the text segment for demand-paged binaries at 0x2020
-# and other binaries at 0x2000, since the exec header is paged in
-# with the text.  Some other Unix variants do the same.
-# For -n and -N flags the offset of the exec header must be removed.
-# This sed script does this if the master script contains
-# a line of the form ".text 0xAAAA BLOCK(0xBBBB):" - the
-# output will contain ".text 0xBBBB:".  (For Sunos AAAA=2020 and BBBB=2000.)
-.x.xn:
-       sed -e '/text/s/\.text .* BLOCK(\([^)]*\)):/.text \1:/' < $< >$*.xn
-
-# The .xN script is used if the -N flag is given (don't write-protect text).
-# This is like -n, except that the data segment need not be page-aligned.
-# So get rid of commands for page-alignment:  We assume these use ALIGN
-# with a hex constant that end with 00, since any normal page size is be
-# at least divisible by 256.  We use the 00 to avoid matching
-# anything that tries to align of (say) 8-byte boundaries.
-.xn.xN:
-       sed -e '/ALIGN/s/ALIGN( *0x[0-9a-fA-F]*00 *)/./' < $< >$*.xN
-
-# The xu and xr scripts don't search libraries, so LIB_PATH doesn't matter.
-.sc.xu:
-       sed $(SED_MAKE_RELOC_WITH_CONSTRUCTORS) < $< | ./mkscript >$*.xu
-.sc.xr:
-       sed $(SED_MAKE_RELOC_WITH_CONSTRUCTORS) $(SED_REMOVE_CONSTRUCTORS) \
-       < $< | ./mkscript >$*.xr
-
-# for self hosting
-BFDLIB=../bfd/libbfd.a
-LIBIBERTY=../libiberty/libiberty.a
-
-OFILES= ldgram.o ldlex.o ldlang.o ldctor.o ldmain.o ldindr.o \
-       ldwarn.o ldwrite.o ldexp.o ldlnk960.o ld__gld68k.o ld__i386aout.o \
-       ld__m88k.o ld__glda29k.o ld__news.o h8300hds.o ld__ebmon29k.o \
-       ld__gld.o ldgld960.o ldemul.o ldver.o ldmisc.o ldsym.o ldvanilla.o ldfile.o
-
-HEADERS=config.h ldmain.h ldmain.h ldwarn.h ldmisc.h ldindr.h \
-       ldsym.h ldctor.h ldlang.h ldexp.h \
-       ldlex.h ldwrite.h ldver.h ldemul.h ldfile.h ldgram.h ld.h
-
-MANSOURCES=ld.tex
-
-LDCSOURCES=ldlang.c ldctor.c ldindr.c ldmain.c ldwrite.c ldwarn.c ldlnk960.c \
-       ld__gld.c ld__gld68k.c ld__m88k.c ld__ebmon29k.c \
-       ldgld960.c ldemul.c ldver.c ldmisc.c ldexp.c ldsym.c ldfile.c ldvanilla.c
-
-GENERATED_SOURCES=ldgram.c ldlex.c ldgram.h ld__*.c
-GENERATED_HEADERS=ldgram.h
-
-LDSOURCES=$(LDCSOURCES) ldgram.y ldlex.l ldgram.h
-
-BFDSOURCES=../../bfd/common/*.c
-
-SOURCES= $(LDSOURCES) $(BFDSOURCES)
-LINTSOURCES=   $(LDCSOURCES) $(BFDSOURCES) $(GENERATED_SOURCES)
-
-STAGESTUFF = *.x *.x[ru] *.sc[ru] $(GENERATED_SOURCES) $(GENERATED_HEADERS) $(OFILES) $(LD_PROG) mkscript
-
-all: $(LD_PROG)
-
-all-info: ld.info
-
-ldgram.h ldgram.c: ldgram.y
-       $(BISON) $(BISONFLAGS) -d ldgram.y
-       mv -f y.tab.c ldgram.c
-       mv -f y.tab.h ldgram.h
-
-ldlex.c: ldlex.l
-       lex -t ldlex.l >ldlex.c 
-
-# These all start with ld__ so 'make clean' can find them.
-
-ld__gld.c: $(srcdir)/ldtemplate
-       sed -e s/"<ldtarget>"/ldgld/g -e s/"<arch>"/m68k/g \
-       -e s/"<target>"//g -e s/"<TARGET>"//g <$(srcdir)/ldtemplate >$@
-ld__news.c: $(srcdir)/ldtemplate
-       sed -e s/"<ldtarget>"/news/g -e s/"<arch>"/m68k/g \
-       -e s/"<target>"/news/g -e s/"<TARGET>"/NEWS/g <$(srcdir)/ldtemplate >$@
-
-ld__i386aout.c: $(srcdir)/ldtemplate
-       sed -e s/"<ldtarget>"/i386aout/g -e s/"<arch>"/i386/g \
-       -e s/"<target>"/i386aout/g -e s/"<TARGET>"/I386AOUT/g <$(srcdir)/ldtemplate >$@
-
-ld__ebmon29k.c: $(srcdir)/ldtemplate
-       sed -e s/"<ldtarget>"/ebmon29k/g -e s/"<arch>"/a29k/g \
-       -e s/"gld<target>"/ebmon29k/g -e s/"GLD<TARGET>"/EBMON29K/g \
-       -e s/"<ldtarget>.x"/ebmon.x/ <$(srcdir)/ldtemplate >$@
-
-ld__gld68k.c: $(srcdir)/ldtemplate
-       sed -e s/"<ldtarget>"/ldgld68k/g -e s/"<arch>"/m68k/g \
-       -e s/"<target>"/68k/g -e s/"<TARGET>"/68K/g <$(srcdir)/ldtemplate >$@
-ld__glda29k.c: $(srcdir)/ldtemplate
-       sed -e s/"<ldtarget>"/ldglda29k/g -e s/"<arch>"/a29k/g \
-       -e s/"<target>"/29k/g -e s/"<TARGET>"/29K/g <$(srcdir)/ldtemplate >$@
-ld__m88k.c: $(srcdir)/ldtemplate
-       sed -e s/"<ldtarget>"/ldm88k/g -e s/"<arch>"/m88k/g \
-       -e s/"<target>"/m88kbcs/g -e s/"<TARGET>"/M88KBCS/g <$(srcdir)/ldtemplate >$@
-
-# The .c files for these are generated from ldtemplete.
-ld__gld.o: ./mkscript ldgld.x ldgld.xr ldgld.xu ldgld.xn ldgld.xN
-ld__news.o: ./mkscript news.x news.xr news.xu news.xn news.xN
-ld__i386aout.o: ./mkscript i386aout.x i386aout.xr i386aout.xu i386aout.xn i386aout.xN
-ld__ebmon29k.o: ./mkscript ebmon29k.x ebmon29k.xr ebmon29k.xu \
-       ebmon29k.xn ebmon29k.xN
-ld__gld68k.o: ./mkscript ldgld68k.x ldgld68k.xr ldgld68k.xu \
-       ldgld68k.xn ldgld68k.xN
-ld__glda29k.o: ./mkscript ldglda29k.x ldglda29k.xr ldglda29k.xu \
-       ldglda29k.xn ldglda29k.xN
-ld__m88k.o: ./mkscript ldm88k.x ldm88k.xr ldm88k.xu ldm88k.xn ldm88k.xN
-
-# The .c files for these are (for now) specially written (not ldtemplete).
-ldgld960.o: ./mkscript ldgld960.x
-ldlnk960.o: ./mkscript ldlnk960.x ldlnk960.xr
-h8300hds.o: ./mkscript h8300hds.x
-
-
-#$(BFDLIB): $(BFDSOURCES)
-#      (cd ../bfd; make)
-
-$(LD_PROG): $(OFILES) $(BFDLIB) $(LIBIBERTY)
-       $(CC) $(CFLAGS) $(LDFLAGS) -o $(LD_PROG) $(OFILES) $(BFDLIB) $(LIBIBERTY) $(LOADLIBES)
-
-#      (cd ../bfd; make)
-#      LDEMULATION=gld; export LDEMULATION;  GNUTARGET=a.out-sunos-big;./ldok -format a.out-sunos-big  -o ld /lib/crt0.o   $(OFILES) $(BFDLIB) $(LIBIBERTY) -lc /usr/local/lib/gcc/sparc/1.91/gnulib
-#      gld -o ld /lib/crt0.o   $(OFILES) $(BFDLIB) $(LIBIBERTY) -lc /usr/local/lib/gcc/sparc/1.91/gnulib
-#      $(CC) -Bstatic -o ld.new $(OFILES) $(BFDLIB) $(LIBIBERTY)
-
-
-ld1: ld.new
-       $(HOSTING_EMU); ./ld.new -o ld1 $(HOSTING_CRT0) $(OFILES) $(BFDLIB) $(LIBIBERTY) $(HOSTING_LIBS)
-
-ld2: ld1
-       $(HOSTING_EMU); ./ld1 -o ld2 $(HOSTING_CRT0) $(OFILES) $(BFDLIB) $(LIBIBERTY) $(HOSTING_LIBS)
-
-ld3: ld2
-       $(HOSTING_EMU); ./ld2 -o ld3 $(HOSTING_CRT0) $(OFILES) $(BFDLIB) $(LIBIBERTY) $(HOSTING_LIBS)
-
-######################################################################
-# DOCUMENTATION TARGETS
-# TeX output
-ld.dvi: $(srcdir)/ld.texinfo
-       TEXINPUTS=${TEXIDIR}:.:$$TEXINPUTS tex $(srcdir)/ld.texinfo
-       texindex ld.??
-       TEXINPUTS=${TEXIDIR}:.:$$TEXINPUTS tex $(srcdir)/ld.texinfo
-
-# info file for online browsing
-ld.info: $(srcdir)/ld.texinfo
-       $(MAKEINFO) -o ld.info $(srcdir)/ld.texinfo
-
-#separate targets for "ms", "me", and "mm" forms of roff doc
-# Try to use a recent texi2roff.  v2 was put on prep in jan91.
-# If you want an index, see texi2roff doc for postprocessing 
-# and add -i to texi2roff invocations below.
-# Workarounds for texi2roff-2 (probably fixed in later texi2roff's, delete
-#    correspondint -e lines when later texi2roff's are current)
-# + @ifinfo's deleted explicitly due to texi2roff-2 bug w nested constructs.
-# + @c's deleted explicitly because texi2roff sees texinfo commands in them
-# + @   (that's at-BLANK) not recognized by texi2roff, turned into blank
-# + @alphaenumerate is ridiculously new, turned into @enumerate
-
-ld.ms: $(srcdir)/ld.texinfo
-       sed -e '/\\input texinfo/d' \
-               -e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
-               -e '/^@ifinfo/,/^@end ifinfo/d' \
-               -e '/^@c/d' \
-               -e 's/{.*,,/{/' \
-               -e 's/@ / /g' \
-               -e 's/^@alphaenumerate/@enumerate/g' \
-               -e 's/^@end alphaenumerate/@end enumerate/g' \
-               $(srcdir)/ld.texinfo | \
-       $(TEXI2ROFF) $(TEXI2OPT) -ms | \
-       sed -e 's/---/\\(em/g' \
-               >>ld.ms 
-
-# index for roff output
-ld-index.ms: ld.ms
-       $(ROFF) -ms ld.ms 2>&1 1>/dev/null | \
-               sed -e '/: warning:/d' | \
-               texi2index >ld-index.ms
-
-# roff output (-mm)
-ld.mm: $(srcdir)/ld.texinfo
-       sed -e '/\\input texinfo/d' \
-               -e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
-               -e '/^@ifinfo/,/^@end ifinfo/d' \
-               -e '/^@c/d' \
-               -e 's/{.*,,/{/' \
-               -e '/@noindent/d' \
-               -e 's/@ / /g' \
-               -e 's/^@alphaenumerate/@enumerate/g' \
-               -e 's/^@end alphaenumerate/@end enumerate/g' \
-               $(srcdir)/ld.texinfo | \
-       $(TEXI2ROFF) $(TEXI2OPT) -mm | \
-       sed -e 's/---/\\(em/g' \
-       >ld.mm 
-
-# index for roff output
-ld-index.mm: ld.mm
-       $(ROFF) -mm ld.mm 2>&1 1>/dev/null | \
-               sed -e '/: warning:/d' | \
-               texi2index >ld-index.mm
-
-# roff output (-me)
-ld.me: $(srcdir)/ld.texinfo
-       sed -e '/\\input texinfo/d' \
-               -e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
-               -e '/^@ifinfo/,/^@end ifinfo/d' \
-               -e '/^@c/d' \
-               -e 's/{.*,,/{/' \
-               -e 's/@ / /g' \
-               -e 's/^@alphaenumerate/@enumerate/g' \
-               -e 's/^@end alphaenumerate/@end enumerate/g' \
-               $(srcdir)/ld.texinfo | \
-       $(TEXI2ROFF) $(TEXI2OPT) -me | \
-       sed -e 's/---/\\(em/g' \
-               >>ld.me 
-
-# index for roff output
-ld-index.me: ld.me
-       $(ROFF) -me ld.me 2>&1 1>/dev/null | \
-               sed -e '/: warning:/d' | \
-               texi2index >ld-index.me
-
-
-######################################################################
-
-mkscript: $(srcdir)/mkscript.c
-       $(CC) $(CFLAGS) $(LDFLAGS) -o mkscript $(srcdir)/mkscript.c $(LOADLIBES)
-
-ldlex.c: ldlex.l ldgram.h
-ldlex.o: ldlex.c ldgram.h
-ldgram.o: ldgram.c
-ldgram.c: ldgram.y
-
-ldgld68k.x : ldgld68k.sc 
-ldgld68kUr.x : ldgld68kUr.sc 
-ldgld68kr.x : ldgld68kr.sc 
-h8300hds.x: h8300hds.sc
-ldgld.x : ldgld.sc 
-ldgldUr.x : ldgldUr.sc 
-ldgldr.x : ldgldr.sc 
-ldlnk960.x : ldlnk960.sc 
-ldlnk960r.x : ldlnk960r.sc 
-ldgld960.x : ldgld960.sc 
-ldgldm88k.x : ldgldm88k.sc 
-ldm88kUr.x : ldm88kUr.sc 
-ldm88kr.x: ldm88kr.sc
-ldm88k.x: ldm88k.sc
-news.x: news.sc
-i386aout.x: i386aout.sc
-h8300hds.x: h8300hds.sc
-h8300hds.o: h8300hds.c
-ldgld68k.x: ldgld68k.sc
-ldglda29k.x : ldglda29k.sc 
-ldglda29kr.x : ldglda29kr.sc 
-ldglda29kUr.x : ldglda29kUr.sc 
-
-ebmon29k.x : ebmon29k.sc 
-ebmon29kr.x : ebmon29kr.sc 
-ebmon29kUr.x : ebmon29kUr.sc 
-
-stage1:        force
-       - mkdir stage1
-       - mv -f $(STAGESTUFF) stage1
-       - (cd stage1 ; ln -s $(LD_PROG) ld)
-
-stage2:        force
-       - mkdir stage2
-       - mv -f $(STAGESTUFF) stage2
-       - (cd stage2 ; ln -s $(LD_PROG) ld)
-
-stage3:        force
-       - mkdir stage3
-       - mv -f $(STAGESTUFF) stage3
-       - (cd stage3 ; ln -s $(LD_PROG) ld)
-
-against=stage2
-
-comparison: force
-       for i in $(STAGESTUFF) ; do cmp $$i $(against)/$$i ; done
-
-de-stage1: force
-       - (cd stage1 ; mv -f * ..)
-       - rm ld
-       - rmdir stage1
-
-de-stage2: force
-       - (cd stage2 ; mv -f * ..)
-       - rm ld
-       - rmdir stage2
-
-de-stage3: force
-       - (cd stage3 ; mv -f * ..)
-       - rm ld
-       - rmdir stage3
-
-clean:
-       - rm -f TAGS $(OFILES) $(GENERATED_SOURCES) $(GENERATED_HEADERS)
-       - rm -f *.x *.x[runN] *.sc[runN]
-       - rm -f ld.?? ld.???
-       - rm -f ld ld1 ld2 ld3 ld.new mkscript *.o y.output
-
-lintlog: $(SOURCES) Makefile
-       $(LINT) -abhxzn  $(LINTFLAGS)  $(LINTSOURCES) \
-| grep -v "pointer casts may be troublesome" \
-| grep -v "possible pointer alignment problem" \
-| grep -v "ignore" \
-| grep -v "conversion from long may lose accuracy" \
-| grep -v "warning: constant argument to NOT" \
-| grep -v "enumeration type clash, operator CAST" \
-| grep -v "warning: constant in conditional context"\
-| grep -v "archive\.c"
-
-
-tags TAGS: $(SOURCES) $(HEADERS)
-       etags -t $?
-
-
-objdump: objdump.c 
-
-install: $(LD_PROG)
-       $(INSTALL_PROGRAM) ld.new $(ddestdir)/bin/ld
-       $(INSTALL_PROGRAM) ld.new $(gcclibdir)/ld
-
-install-info: all-info
-       for i in ld.info* ; do \
-               echo Installing $$i... ; \
-               (cp $$i $(idestdir)/info/$$i.new \
-                       && mv -f $(idestdir)/info/$$i.new $(idestdir)/info/$$i) \
-               || exit 1 ; \
-       done
-
-# Something like the following might make sense for install, but doesn't work
-# - it is too fragile, depending on a gcc binary int the right place.
-# Perhaps using gcc/version.c might work?
-#      # If $(gcclibdir) exists, install ld there, and put a link to it
-#      # from $(bindir);  otherwise put ld in $(bindir).
-#      if ([ -x $(unsubdir)/../gcc$(subdir)/gcc -a -d $(gcclibdir) ]); then \
-#          $(INSTALL_PROGRAM) ld.new $(gcclibdir)/ld; \
-#          cd $(bindir); rm -f ld; ln -s $(gcclibdir)/ld ld; \
-#      else \
-#          $(INSTALL_PROGRAM) ld.new $(bindir)/ld;  \
-#      fi
-
-#-----------------------------------------------------------------------------
-#              'STANDARD' GNU/960 TARGETS BELOW THIS POINT
-#
-# 'VERSION' file must be present and contain a string of the form "x.y"
-#-----------------------------------------------------------------------------
-
-ver960.c: FORCE
-       rm -f ver960.c
-       echo "char ${TARG}_ver[]= \"${TARG} `cat VERSION`, `date`\";" > ver960.c
-
-
-# This target should be invoked before building a new release.
-# 'VERSION' file must be present and contain a string of the form "x.y"
-#
-roll:
-       @V=`cat VERSION`                ; \
-       MAJ=`sed 's/\..*//' VERSION`    ; \
-       MIN=`sed 's/.*\.//' VERSION`    ; \
-       V=$$MAJ.`expr $$MIN + 1`        ; \
-       rm -f VERSION                   ; \
-       echo $$V >VERSION               ; \
-       echo Version $$V
-
-
-dep: $(LDSOURCES)
-       mkdep $(CFLAGS) $?
-
-# Dummy target to force execution of dependent targets.
-#
-force:
-
-# Target to uncomment host-specific lines in this makefile.  Such lines must
-# have the following string beginning in column 1: #__<hostname>__#
-# Original Makefile is backed up as 'Makefile.old'.
-#
-# Invoke with:  make make HOST=xxx
-#
-make:
-       -@if test $(HOST)x = x ; then \
-               echo '\aSpecify "make make HOST=???"'; \
-               exit 1; \
-       fi ; \
-       grep -s "^#The next line was generated by 'make make'" Makefile; \
-       if test $$? = 0 ; then  \
-               echo "\aMakefile has already been processed with 'make make'";\
-               exit 1; \
-       fi ; \
-       mv -f Makefile Makefile.old; \
-       echo "#The next line was generated by 'make make'"       >Makefile ; \
-       echo "HOST=$(HOST)"                                     >>Makefile ; \
-       echo                                                    >>Makefile ; \
-       sed "s/^#__$(HOST)__#//" < Makefile.old                 >>Makefile
-
-#\f
-
-Makefile: $(srcdir)/Makefile.in $(host_makefile_frag) $(target_makefile_frag)
-       $(SHELL) ./config.status
-
-### Local Variables: ***
-### mode:fundamental ***
-### page-delimiter: "^#\f" ***
-### End: ***
-### end of file
-
-
-# IF YOU PUT ANYTHING HERE IT WILL GO AWAY
diff --git a/ld/news.sc b/ld/news.sc
deleted file mode 100755 (executable)
index 9bf3af7..0000000
+++ /dev/null
@@ -1,30 +0,0 @@
-OUTPUT_FORMAT("a.out-newsos3")
-OUTPUT_ARCH(m68k)
-
-SEARCH_DIR(/lib)                       
-SEARCH_DIR(/usr/lib)                   
-SEARCH_DIR(/usr/local/lib)             
-__DYNAMIC  =  0;                               
-SECTIONS                               
-{                                      
-  .text 0:
-  {                                    
-   CREATE_OBJECT_SYMBOLS               
-    *(.text)                           
-    _etext  =  ALIGN(0x1000);
-    }
-  .data  ALIGN(0x1000) :               
-  {                                    
-    *(.data)                           
-      CONSTRUCTORS;
-      _edata  =  .;                    
-  }                                    
-  .bss   SIZEOF(.data) + ADDR(.data) : 
-  {                                    
-   *(.bss)                             
-   *(COMMON)                           
-     _end = .;
-     __end = .;
-  }                                    
-}
-
diff --git a/ld/saber b/ld/saber
deleted file mode 100755 (executable)
index e57f045..0000000
--- a/ld/saber
+++ /dev/null
@@ -1,80 +0,0 @@
-suppress 652
-load -I../bfd -I../../devo/bfd -I../../devo/include -DMINIMIZE=1 -DDEFAULT_VECTOR='hp300bsd_vec' -DSELECT_VECS='&hp300bsd_vec' ../../devo/bfd/targets.c
-load -I. -I../../devo/ld -I../../devo/include ld__a29k.c
-load -I. -I../../devo/ld -I../../devo/include ld__h8300hms.c
-load -I. -I../../devo/ld -I../../devo/include ld__lnk960.c
-load -I. -I../../devo/ld -I../../devo/include ld__sun3.c
-load -I. -I../../devo/ld -I../../devo/include ldlex.c
-load -I. -I../../devo/ld -I../../devo/include ld__ebmon29k.c
-load -I. -I../../devo/ld -I../../devo/include ld__h8300xray.c
-load -I. -I../../devo/ld -I../../devo/include ld__m88kbcs.c
-load -I. -I../../devo/ld -I../../devo/include ld__sun4.c
-load -I. -I../../devo/ld -I../../devo/include ld__gld960.c
-load -I. -I../../devo/ld -I../../devo/include ld__hp300bsd.c
-load -I. -I../../devo/ld -I../../devo/include ld__news.c
-load -I. -I../../devo/ld -I../../devo/include ld__vanilla.c
-load -I. -I../../devo/ld -I../../devo/include ld__go32.c
-load -I. -I../../devo/ld -I../../devo/include ld__i386aout.c
-load -I. -I../../devo/ld -I../../devo/include ld__st2000.c
-load -I. -I../../devo/ld -I../../devo/include ld__sa29200.c
-load -I. -I../../devo/ld -I../../devo/include ldgram.c
-
-load -I. -I../../devo/ld -I../../devo/include ../../devo/ld/cplus-dem.c
-load -I. -I../../devo/ld -I../../devo/include ../../devo/ld/ldexp.c
-load -I. -I../../devo/ld -I../../devo/include ../../devo/ld/ldlang.c
-load -I. -I../../devo/ld -I../../devo/include ../../devo/ld/ldver.c
-load -I. -I../../devo/ld -I../../devo/include ../../devo/ld/ldctor.c
-load -I. -I../../devo/ld -I../../devo/include ../../devo/ld/ldfile.c
-load -I. -I../../devo/ld -I../../devo/include ../../devo/ld/ldmain.c
-load -I. -I../../devo/ld -I../../devo/include ../../devo/ld/ldwarn.c
-load -I. -I../../devo/ld -I../../devo/include ../../devo/ld/mri.c
-load -I. -I../../devo/ld -I../../devo/include ../../devo/ld/ldemul.c
-load -I. -I../../devo/ld -I../../devo/include ../../devo/ld/ldmisc.c
-load -I. -I../../devo/ld -I../../devo/include ../../devo/ld/ldwrite.c
-load -I. -I../../devo/ld -I../../devo/include ../../devo/ld/relax.c
-load -I. -I../../devo/ld -I../../devo/include ../../devo/ld/lderror.c
-load -I. -I../../devo/ld -I../../devo/include ../../devo/ld/ldindr.c
-load -I. -I../../devo/ld -I../../devo/include ../../devo/ld/ldsym.c
-load -I. -I../../devo/ld -I../../devo/include ../../devo/ld/lexsup.c
-
-
-
-load -I../bfd -I../../devo/bfd -I../../devo/include ../../devo/bfd/bfd.c
-load -I../bfd -I../../devo/bfd -I../../devo/include ../../devo/bfd/stab-sym.c
-load -I../bfd -I../../devo/bfd -I../../devo/include ../../devo/bfd/archures.c
-load -I../bfd -I../../devo/bfd -I../../devo/include ../../devo/bfd/bout.c
-load -I../bfd -I../../devo/bfd -I../../devo/include ../../devo/bfd/cache.c
-load -I../bfd -I../../devo/bfd -I../../devo/include ../../devo/bfd/core.c
-load -I../bfd -I../../devo/bfd -I../../devo/include ../../devo/bfd/aout32.c
-load -I../bfd -I../../devo/bfd -I../../devo/include ../../devo/bfd/demo64.c
-load -I../bfd -I../../devo/bfd -I../../devo/include ../../devo/bfd/opncls.c
-load -I../bfd -I../../devo/bfd -I../../devo/include ../../devo/bfd/reloc.c
-load -I../bfd -I../../devo/bfd -I../../devo/include ../../devo/bfd/seclet.c
-load -I../bfd -I../../devo/bfd -I../../devo/include ../../devo/bfd/init.c
-load -I../bfd -I../../devo/bfd -I../../devo/include ../../devo/bfd/section.c
-load -I../bfd -I../../devo/bfd -I../../devo/include ../../devo/bfd/coff-a29k.c
-load -I../bfd -I../../devo/bfd -I../../devo/include ../../devo/bfd/hp300bsd.c
-load -I../bfd -I../../devo/bfd -I../../devo/include ../../devo/bfd/syms.c
-
-
-load -I../bfd -I../../devo/bfd -I../../devo/include ../../devo/bfd/archive.c
-load -I../bfd -I../../devo/bfd -I../../devo/include ../../devo/bfd/libbfd.c
-
-load -I../bfd -I../../devo/bfd -I../../devo/include ../../devo/bfd/cpu-a29k.c
-load -I../bfd -I../../devo/bfd -I../../devo/include ../../devo/bfd/format.c
-load -I../bfd -I../../devo/bfd -I../../devo/include ../../devo/bfd/cpu-i386.c
-load -I../bfd -I../../devo/bfd -I../../devo/include ../../devo/bfd/cpu-m68k.c
-load -I../bfd -I../../devo/bfd -I../../devo/include ../../devo/bfd/cpu-mips.c
-load -I../bfd -I../../devo/bfd -I../../devo/include ../../devo/bfd/cpu-sparc.c
-load -I../bfd -I../../devo/bfd -I../../devo/include ../../devo/bfd/cpu-h8300.c
-load -I../bfd -I../../devo/bfd -I../../devo/include ../../devo/bfd/cpu-i960.c
-load -I../bfd -I../../devo/bfd -I../../devo/include ../../devo/bfd/cpu-m88k.c
-load -I../bfd -I../../devo/bfd -I../../devo/include ../../devo/bfd/cpu-rs6000.c
-load -I../bfd -I../../devo/bfd -I../../devo/include ../../devo/bfd/cpu-vax.c
-
-load -I../libiberty -I../../devo/libiberty -I../../devo/include ../../devo/libiberty/obstack.c
-load -I../libiberty -I../../devo/libiberty -I../../devo/include ../../devo/libiberty/strtoul.c
-load -I../libiberty -I../../devo/libiberty -I../../devo/include ../../devo/libiberty/strerror.c
-
-
-
diff --git a/readline/config.sub b/readline/config.sub
deleted file mode 100755 (executable)
index dac9ab8..0000000
+++ /dev/null
@@ -1,446 +0,0 @@
-#!/bin/sh
-
-# Configuration subroutine to validate and canonicalize a configuration type.
-# Supply the specified configuration type as an argument.
-# If it is invalid, we print an error message on stderr and exit with code 1.
-# Otherwise, we print the canonical config type on stdout and succeed.
-
-# This file is supposed to be the same for all GNU packages
-# and recognize all the CPU types, system types and aliases
-# that are meaningful with *any* GNU software.
-# Each package is responsible for reporting which valid configurations
-# it does not support.  The user should be able to distinguish
-# a failure to support a valid configuration from a meaningless
-# configuration (e.g. a typo).
-
-# Please email any bugs, comments, and/or additions to this file to:
-# configure@cygnus.com
-
-# decode aliases into canonical names
-
-case "$1" in
-# cpu alone is a valid alias for cpu-none-none.
-vax | tahoe | i386 | i860 | m68k | m68000 | m88k | sparc | ns32k \
-       | alliant | arm | c1 | c2 | mips | pyramid | tron | a29k \
-       | romp | rs6000 | i960 | h8300)
-       cpu=$1
-       vendor=none
-       os=none
-       ;;
-altos | altos3068)
-       cpu=m68k
-       vendor=altos
-       os=sysv # maybe?
-       ;;
-altosgas)
-       cpu=m68k
-       vendor=altos
-       os=gas
-       ;;
-am29k)
-       cpu=a29k
-       vendor=none
-       os=bsd
-       ;;
-amdahl)
-       cpu=580
-       vendor=amdahl
-       os=uts
-       ;;
-amigados)
-       cpu=m68k
-       vendor=cbm
-       os=amigados # Native AmigaDOS
-       ;;
-amigaunix | amix)
-       cpu=m68k
-       vendor=cbm
-       os=svr4 # System V Release 4 (svr4 is an industry recognized acronym)
-       ;;
-apollo68)
-       cpu=m68k
-       vendor=apollo
-       os=sysv # maybe?
-       ;;
-balance)
-       cpu=ns32k
-       vendor=sequent
-       os=dynix
-       ;;
-convex-c1)
-       cpu=c1
-       vendor=convex
-       os=sysv # maybe?
-       ;;
-convex-c2)
-       cpu=c2
-       vendor=convex
-       os=sysv # maybe?
-       ;;
-cray | ymp)
-       cpu=ymp
-       vendor=cray
-       os=unicos
-       ;;
-cray2)
-       cpu=cray2
-       vendor=cray
-       os=unicos
-       ;;
-dec3100 | decstatn | decstation | decstation-3100 | pmax | pmin)
-       cpu=mips
-       vendor=dec
-       os=ultrix
-       ;;
-delta | 3300 | motorola-3300 | motorola-delta \
-      | 3300-motorola | delta-motorola)
-       cpu=m68k
-       vendor=motorola
-       os=sysv # maybe?
-       ;;
-
-delta88)
-       cpu=m88k
-       vendor=motorola
-       os=m88kbcs
-       ;;
-
-gmicro)
-       cpu=tron
-       vendor=gmicro
-       os=sysv # maybe?
-       ;;
-
-h8300hds)
-       cpu=h8300
-       vendor=hitachi
-       os=hds
-       ;;
-
-# start-sanitize-v9
-hal-32 | hal32)
-       cpu=sparc64
-       vendor=hal
-       os=hal32
-       ;;
-hal-64 | hal64)
-       cpu=sparc64
-       vendor=hal
-       os=hal64
-       ;;
-sparc64)
-       cpu=sparc64
-       vendor=sun
-       os=v9
-       ;;
-sparc64-v7 | sparc64v7)
-       cpu=sparc64
-       vendor=sun
-       os=v7
-       ;;
-# end-sanitize-v9
-hp300bsd)
-       cpu=m68k
-       vendor=hp
-       os=bsd
-       ;;
-hp300hpux | hpux | hp9k3[2-9][0-9])
-       cpu=m68k
-       vendor=hp
-       os=hpux
-       ;;
-hp9k31[0-9] | hp9k2[0-9][0-9])
-       cpu=m68000
-       vendor=hp
-       os=hpux
-       ;;
-i386sco)
-       cpu=i386
-       vendor=sco
-       os=sysv # maybe?
-       ;;
-i386v)
-       cpu=i386
-       vendor=none
-       os=sysv
-       ;;
-i386v32)
-       cpu=i386
-       vendor=none
-       os=sysv32
-       ;;
-iris | iris4d)
-       cpu=mips
-       vendor=sgi
-       os=irix # maybe?
-       ;;
-
-dpx2)
-       vendor=bull
-       cpu=m68k
-       os=sysv
-       ;;
-isi | isi68)
-       cpu=m68k
-       vendor=isi
-       os=sysv # maybe?
-       ;;
-littlemips)
-       cpu=mips
-       vendor=little
-       os=bsd
-       ;;
-magnum | m3230)
-       cpu=mips
-       vendor=mips
-       os=sysv # maybe?
-       ;;
-merlin)
-       cpu=ns32k
-       vendor=utek
-       os=sysv # maybe?
-       ;;
-miniframe)
-       cpu=m68000
-       vendor=convergent
-       os=sysv # maybe?
-       ;;
-mmax)
-       cpu=ns32k
-       vendor=encore
-       os=sysv # maybe?
-       ;;
-news | news700 | news800 | news900)
-       cpu=m68k
-       vendor=sony
-       os=newsos3 # Based on bsd-4.3
-       ;;
-news1000)
-       cpu=m68030
-       vendor=sony
-       os=newsos3 # ?
-       ;;
-news-3600 | bigmips | risc-news)
-       cpu=mips
-       vendor=sony
-       os=newsos4 # Presumably?
-       ;;
-next)
-       cpu=m68k
-       vendor=next
-       os=sysv # maybe?
-       ;;
-nindy960)
-       cpu=i960
-       vendor=intel
-       os=nindy
-       ;;
-none)
-       cpu=none
-       vendor=none
-       os=none
-       ;;
-np1)
-       cpu=np1
-       vendor=gould
-       os=sysv # maybe?
-       ;;
-rtpc)
-       cpu=romp
-       vendor=ibm
-       os=aix # maybe?
-       ;;      
-pbd)
-       cpu=sparc
-       vendor=unicom
-       os=sysv
-       ;;
-pn)
-       cpu=pn
-       vendor=gould
-       os=sysv # maybe?
-       ;;
-ps2)
-       cpu=i386
-       vendor=ibm
-       os=sysv # maybe?
-       ;;
-sun2)
-       cpu=m68000
-       vendor=sun
-       os=sunos4
-       ;;
-sun2os3)
-       cpu=m68000
-       vendor=sun
-       os=sunos3
-       ;;
-sun2os4)
-       cpu=m68000
-       vendor=sun
-       os=sunos4
-       ;;
-sun3)
-       cpu=m68k
-       vendor=sun
-       os=sunos4
-       ;;
-sun3os3)
-       cpu=m68k
-       vendor=sun
-       os=sunos3
-       ;;
-sun3os4)
-       cpu=m68k
-       vendor=sun
-       os=sunos4
-       ;;
-sun386 | roadrunner | sun386i)
-       cpu=i386
-       vendor=sun
-       os=sunos
-       ;;
-sun4)
-       cpu=sparc
-       vendor=sun
-       os=sunos4
-       ;;
-sun4os3)
-       cpu=sparc
-       vendor=sun
-       os=sunos3
-       ;;
-sun4os4)
-       cpu=sparc
-       vendor=sun
-       os=sunos4
-       ;;
-symmetry)
-       cpu=i386
-       vendor=sequent
-       os=dynix
-       ;;
-tower | tower-32)
-       cpu=m68k
-       vendor=ncr
-       os=sysv # maybe?
-       ;;
-ultra3)
-       cpu=a29k
-       vendor=nyu
-       os=sym1
-       ;;
-umax)
-       cpu=ns32k
-       vendor=encore
-       os=sysv # maybe?
-       ;;
-unixpc | safari | pc7300 | 3b1 | 7300 | 7300-att | att-7300)
-       cpu=m68k
-       vendor=att
-       os=sysv # maybe?
-       ;;
-vax-dec)
-       cpu=vax
-       vendor=dec
-       os=ultrix # maybe?
-       ;;
-vxworks68)
-       cpu=m68k
-       vendor=wrs
-       os=vxworks
-       ;;
-vxworks960)
-       cpu=i960
-       vendor=wrs
-       os=vxworks
-       ;;
-xmp)
-       cpu=xmp
-       vendor=cray
-       os=unicos
-       ;;
-# not an alias.  parse what we expect to be a canonical name.
-*)
-       cpu=`echo $1 | sed 's/-.*$//'`
-
-       if [ "${cpu}" = "$1" ] ; then
-               # no vendor so this is an invalid name.
-               echo '***' No vendor: configuration \`$1\' not recognized 1>&2
-               exit 1
-       else
-               # parse out vendor
-               rest=`echo $1 | sed "s/${cpu}-//"`
-               vendor=`echo ${rest} | sed 's/-.*$//'`
-
-               if [ "${vendor}" = "${rest}" ] ; then
-                       # a missing os is acceptable
-                       os=none
-               else
-                       os=`echo ${rest} | sed "s/${vendor}-//"`
-               fi
-       fi
-       ;;
-esac
-
-# At this point we should have three parts of a canonical name in cpu,
-# vendor, and os.
-
-# verify that the cpu is known.
-
-case "${cpu}" in
-none | vax | tahoe | i386 | i860 | m68k | m68000 | m88k | sparc \
-       | ns32k | alliant | arm | c1 | c2 | mips | pyramid | tron \
-       | a29k | romp | rs6000 | i960 | xmp | ymp | cray2 | 580 | h8300)
-       ;;
-
-# start-sanitize-v9
-sparc64) ;;
-# end-sanitize-v9
-
-*)
-       echo '***' Invalid cpu \`${cpu}\': configuration \`$1\' not recognized 1>&2
-       exit 1
-       ;;
-esac
-
-# verify that the vendor is known.
-
-case "${vendor}" in
-       altos | amdahl | aout | apollo | att | bcs | bout |\
-       cbm | convergent | convex | coff | cray | dec | encore |\
-       gould | hitachi | intel | isi | hp | ibm | little | mips | motorola |\
-       ncr | next | none | nyu | sco | sequent | sgi | sony | sun |\
-       unicom | utek | wrs | bull ) ;; 
-
-# start-sanitize-v9
-hal) ;;
-# end-sanitize-v9
-
-*)
-       echo '***' Invalid vendor \`${vendor}\': configuration \`$1\' not recognized 1>&2
-       exit 1
-       ;;
-esac
-
-# verify that the os is known, if it exists.
-
-case "${os}" in
-aix* | aout | bout | bsd* | coff | ctix* | dynix* | esix* | hpux* \
-       | hds | irix* | isc* | kern | mach* | newsos* | nindy* | none \
-       | osf* | sco* | sunos* | sysv* | ultrix* | unos* | v88r* \
-       | vms* | vxworks* | sym[1-9]* | unicos* | uts | svr4 \
-       | amigados) 
-       ;;
-
-# start-sanitize-v9
-hal32 | hal64 | v7 | v9) ;;
-# end-sanitize-v9
-
-*)
-       echo '***' Invalid os \`${os}\': configuration \`$1\' not recognized 1>&2
-       exit 1
-       ;;
-esac
-
-echo ${cpu}-${vendor}-${os}
diff --git a/readline/configure b/readline/configure
deleted file mode 100755 (executable)
index 2f3603a..0000000
+++ /dev/null
@@ -1,623 +0,0 @@
-#!/bin/sh
-
-# Configuration script
-#   Copyright (C) 1988, 1990, 1991 Free Software Foundation, Inc.
-
-#This file is part of GNU.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-# 
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-# 
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-# $Id$
-
-#
-# Shell script to create proper links to machine-dependent files in
-# preparation for compilation.
-#
-# If configure succeeds, it leaves its status in config.status.
-# If configure fails after disturbing the status quo, 
-#      config.status is removed.
-#
-
-remove=rm
-hard_link=ln
-symbolic_link='ln -s'
-
-#for Test
-#remove="echo rm"
-#hard_link="echo ln"
-#symbolic_link="echo ln -s"
-
-progname=$0
-
-# clear some things potentially inherited from environment.
-ansi=
-arguments=$*
-defaulttargets=
-destdir=
-fatal=
-hostsubdir=
-Makefile=Makefile
-Makefile_in=Makefile.in
-norecursion=
-recurring=
-removing=
-srcdir=
-srctrigger=
-target=
-targets=
-commontargets=
-configdirs=
-targetsubdir=
-template=
-verbose=
-
-for arg in $*;
-do
-       case ${arg} in
-       -ansi | +a*)
-               ansi=true
-               clib=clib
-               ;;
-       -destdir=* | +destdir=* | +destdi=* | +destd=* | +dest=* | +des=* | +de=* | +d=*)
-               destdir=`echo ${arg} | sed 's/[+-]d[a-z]*=//'`
-               ;;
-       -languages=* | +languages=* | +language=* | +languag=* \
-               | +langua=* | +langu=* | +lang=* | +lan=* | +la=* \
-               | +l=*)
-               languages="${languages} `echo ${arg} | sed 's/[+-]l[a-z]*=//'`"
-               ;;
-       -gas | +g*)
-               gas=yes
-               ;;
-       -help | +h*)
-               fatal=true
-               ;;
-       -nfp | +nf*)
-               nfp=yes
-               ;;
-       -norecursion | +no*)
-               norecursion=true
-               ;;
-       -recurring | +recurring | +recurrin | +recurri | +recurr | +recur | +recu | +rec | +re)
-               recurring=true
-               ;;
-       -rm | +rm)
-               removing=${arg}
-               ;;
-#      -srcdir=* | +srcdir=* | +srcdi=* | +srcd=* | +src=* | +sr=* | +s=*)
-#              srcdir=`echo ${arg} | sed 's/[+-]s[a-z]*=//'`
-#              ;;
-       -subdirs | +f* | +su*)
-               subdirs=${arg}
-               ;;
-       -target=* | +target=* | +targe=* | +targ=* | +tar=* | +ta=*)
-               if [ -n "${targets}" ] ; then
-                       subdirs="+subdirs"
-               fi
-
-               newtargets="${targets} `echo ${arg} | sed 's/[+-]t[a-z]*=//'`"
-               targets="${newtargets}"
-               ;;
-       -template=* | +template=* | +templat=* | +templa=* | +templ=* | +temp=* | +tem=* | +te=*)
-               template=`echo ${arg} | sed 's/[+-]template=//'`
-               ;;
-       -v | -verbose | +v*)
-               verbose=${arg}
-               ;;
-       -* | +*)
-               (echo ;
-               echo "Unrecognized option: \"${arg}\"". ;
-               echo) 1>&2
-               fatal=true
-               ;;
-       *)
-               if [ -n "${hosts}" ] ; then
-                       subdirs="+subdirs"
-               fi
-
-               newhosts="${hosts} ${arg}"
-               hosts=${newhosts}
-               ;;
-       esac
-done
-
-if [ -n "${verbose}" ] ; then
-       echo `pwd`/configure $*
-fi
-
-# process host and target only if not rebuilding configure itself or removing.
-if [ -z "${template}" -a -z "${removing}" -a -z "${fatal}" ] ; then
-       # Complain if an arg is missing
-       if [ -z "${hosts}" ] ; then
-               (echo ;
-               echo "configure: No HOST specified." ;
-               echo) 1>&2
-               fatal=true
-       fi
-fi
-
-if [ -n "${fatal}" -o "${hosts}" = "help" ] ; then
-       (echo "Usage: configure HOST" ;
-       echo ;
-       echo "Options: [defaults in brackets]" ;
-       echo " +ansi            configure w/ANSI library. [no ansi lib]" ;
-       echo " +destdir=MYDIR   configure for installation into MYDIR. [/usr/local]" ;
-       echo " +subdirs         configure in subdirectories.  [in source directories]" ;
-       echo " +lang=LANG       configure to build LANG. [gcc]" ;
-       echo " +help            print this message. [normal config]" ;
-       echo " +gas             configure the compilers for use with gas. [native as]" ;
-       echo " +nfp             configure the compilers default to soft floating point. [hard float]" ;
-       echo " +norecursion     configure this directory only. [recurse]" ;
-       echo " +rm              remove this configuration. [build a configuration]" ;
-       echo " +target=TARGET   configure for TARGET.  [TARGET = HOST]" ;
-       echo " +template=TEM    rebuild configure using TEM. [normal config]" ;
-       echo ;
-       echo "Where HOST and TARGET are something like \"vax\", \"sun3\", \"encore\", etc." ;
-       echo "Asking for more than one \"+target\" implies \"+subdirs\".  Any other" ;
-       echo "options given will apply to all targets.") 1>&2
-
-       if [ -r config.status ] ; then
-               cat config.status
-       fi
-
-       exit 1
-fi
-
-#### configure.in common parts come in here.
-# This file is a shell script fragment that supplies the information
-# necessary to tailor a template configure script into the configure
-# script appropriate for this directory.  For more information, check
-# any existing configure script.
-
-configdirs=
-srctrigger=readline.c
-srcname="the readline library"
-
-## end of common part.
-
-# are we rebuilding config itself?
-if [ -n "${template}" ] ; then
-       if [ ! -r ${template} ] ; then
-               echo '***' "Can't find template ${template}." 1>&2
-               exit 1
-       fi
-
-# prep the template
-       sed -e '/^#### configure.in common parts come in here.$/,/^## end of common part.$/c\
-#### configure.in common parts come in here.\
-## end of common part.' \
-       -e '/^#### configure.in per-host parts come in here.$/,/^## end of per-host part.$/c\
-#### configure.in per-host parts come in here.\
-## end of per-host part.' \
-       -e '/^#### configure.in per-target parts come in here.$/,/^## end of per-target part.$/c\
-#### configure.in per-target parts come in here.\
-## end of per-target part.' \
-       -e '/^#### configure.in post-target parts come in here.$/,/^## end of post-target part.$/c\
-#### configure.in post-target parts come in here.\
-## end of post-target part.' \
-       < ${template} > template.new
-
-       if [ -r configure.in ] ; then
-               if [ -z "`grep '^# per\-host:' configure.in`" ] ; then
-                       echo '***' `pwd`/configure.in has no "per-host:" line. 1>&2
-                       exit 1
-               fi
-
-               if [ -z "`grep '^# per\-target:' configure.in`" ] ; then
-                       echo '***' `pwd`/configure.in has no "per-target:" line. 1>&2
-                       exit 1
-               fi
-
-               # split configure.in into common, per-host, per-target,
-               # and post-target parts.  Post-target is optional.
-               sed -e '/^# per\-host:/,$d' configure.in > configure.com
-               sed -e '1,/^# per\-host:/d' -e '/^# per\-target:/,$d' configure.in > configure.hst
-               if grep -s '^# post-target:' configure.in ; then
-                 sed -e '1,/^# per\-target:/d' -e '/^# post\-target:/,$d' configure.in > configure.tgt
-                 sed -e '1,/^# post\-target:/d' configure.in > configure.pos
-               else
-                 sed -e '1,/^# per\-target:/d' configure.in > configure.tgt
-                 echo >configure.pos
-               fi
-
-               # and insert them
-               sed -e '/^#### configure.in common parts come in here.$/  r configure.com' \
-                       -e '/^#### configure.in per\-host parts come in here.$/  r configure.hst' \
-                       -e '/^#### configure.in per\-target parts come in here.$/  r configure.tgt' \
-                       -e '/^#### configure.in post\-target parts come in here.$/  r configure.pos' \
-                       template.new > configure.new
-
-               rm -f configure.com configure.tgt configure.hst configure.pos
-       else
-               echo Warning: no configure.in in `pwd`
-               cat ${template} >> configure
-       fi
-
-       chmod a+x configure.new
-       rm template.new
-#      mv configure configure.old
-       mv configure.new configure
-
-       if [ -n "${verbose}" ] ; then
-               echo Rebuilt configure in `pwd`
-       fi
-
-       # Now update config.sub from the template directory.
-       if echo "$template" | grep -s 'configure$' ; then
-               cp `echo "$template" | sed s/configure$/config.sub/` ./config.sub.new
-       #       mv config.sub config.sub.old
-               mv config.sub.new config.sub
-
-               if [ -n "${verbose}" ] ; then
-                       echo Rebuilt config.sub in `pwd`
-               fi
-       fi
-
-       if [ -z "${norecursion}" ] ; then
-               # If template is relative path, make it absolute for recurring.
-               if echo "${template}" | grep -s '^/' ; then
-                  true
-               else
-                  template=`pwd`/${template}
-               fi
-
-               while [ -n "${configdirs}" ] ; do
-                       # set configdir to car of configdirs, configdirs to cdr of configdirs
-                       set ${configdirs}; configdir=$1; shift; configdirs=$*
-
-                       if [ "`echo ${configdir}.*`" != "${configdir}.*" ] ; then
-                               targetspecificdirs=${configdir}.*
-                       else
-                               targetspecificdirs=
-                       fi
-
-                       for i in ${configdir} ${targetspecificdirs} ; do
-                               if [ -d $i ] ; then
-                                       if [ -r $i/configure ] ; then
-                                               (cd $i ;
-                                                       ./configure +template=${template} ${verbose})
-                                       else
-                                               echo Warning: No configure script in `pwd`/$i
-                                       fi
-                               else
-                                       if [ -n "${verbose}" ] ; then
-                                         echo Warning: directory $i is missing.
-                                       fi
-                               fi
-                       done
-               done
-       fi
-
-       exit 0
-fi
-
-# some sanity checks on configure.in
-if [ -z "${srctrigger}" ] ; then
-       echo Warning: srctrigger not set in configure.in. `pwd` not configured.
-       exit 1
-fi
-
-for host in ${hosts} ; do
-       # Default other arg
-       if [ -z "${targets}" -o -n "${defaulttargets}" ] ; then
-               targets=${host}
-               defaulttargets=true
-       fi
-
-       host_alias=${host}
-
-       result=`/bin/sh ./config.sub ${host}`
-       host_cpu=`echo $result | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'`
-       host_vendor=`echo $result | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'`
-       host_os=`echo $result | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'`
-       host=${host_cpu}-${host_vendor}-${host_os}
-       host_makefile_frag=config/hmake-${host}
-
-#### configure.in per-host parts come in here.
-
-case "${host_os}" in
-sysv* | irix*) host_makefile_frag=config/hmake-sysv ;;
-esac
-
-## end of per-host part.
-
-       for target in ${targets} ; do
-
-               target_alias=${target}
-               result=`/bin/sh ./config.sub ${target}`
-               target_cpu=`echo $result | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'`
-               target_vendor=`echo $result | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'`
-               target_os=`echo $result | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'`
-               target=${target_cpu}-${target_vendor}-${target_os}
-               target_makefile_frag=config/tmake-${target}
-
-#### configure.in per-target parts come in here.
-
-## end of per-target part.
-
-               # Temporarily, we support only direct subdir builds.
-               hostsubdir=H-${host_alias}
-               targetsubdir=T-${target_alias}
-
-               if [ -n "${removing}" ] ; then
-                       if [ -n "${subdirs}" ] ; then
-                               if [ -d "${hostsubdir}" ] ; then
-                                       rm -rf ${hostsubdir}/${targetsubdir}
-
-                                       if [ -z "`(ls ${hostsubdir}) 2>&1 | grep Target- | grep -v Target-independent`" ] ; then
-                                               rm -rf ${hostsubdir}
-                                       fi
-                               else
-                                       echo Warning: no `pwd`/${hostsubdir} to remove.
-                               fi
-                       else
-                               rm -f ${Makefile} config.status ${links}
-                       fi
-               else
-                       if [ -n "${subdirs}" ] ; then
-                               # check for existing status before allowing forced subdirs.
-                               if [ -f ${Makefile} ] ; then
-                                       echo '***' "${Makefile} already exists in source directory.  `pwd` not configured." 1>&2
-                                       exit 1
-                               fi
-
-                               if [ ! -d ${hostsubdir} ] ; then mkdir ${hostsubdir} ; fi
-                               cd ${hostsubdir}
-
-                               if [ ! -d ${targetsubdir} ] ; then
-                                       if [ -z "${commontargets}" ] ; then
-                                               mkdir ${targetsubdir}
-                                       else
-                                               if [ ! -d Target-independent ] ; then
-                                                       mkdir Target-independent
-                                               fi
-
-                                               ${symbolic_link} Target-independent ${targetsubdir}
-                                       fi # if target independent
-                               fi # if no target dir yet
-
-                               cd ${targetsubdir}
-
-                               srcdir=../..
-                       else
-                               # if not subdir builds, then make sure none exist.
-                               if [ -n "`(ls .) 2>&1 | grep Host-`" ] ; then
-                                       echo '***' "Configured subdirs exist.  `pwd` not configured." 1>&2
-                                       exit 1
-                               fi
-                       fi
-
-                       # Find the source files, if location was not specified.
-                       if [ -z "${srcdir}" ] ; then
-                               srcdirdefaulted=1
-                               srcdir=.
-                               if [ -n "${srctrigger}" -a ! -r ${srctrigger} ] ; then
-                                       srcdir=..
-                               fi
-                       fi
-
-                       if [ -n "${srctrigger}" -a ! -r ${srcdir}/${srctrigger} ] ; then
-                               if [ -z "${srcdirdefaulted}" ] ; then
-                                       echo '***' "${progname}: Can't find ${srcname} sources in `pwd`/${srcdir}" 1>&2
-                               else
-                                       echo '***' "${progname}: Can't find ${srcname} sources in `pwd`/. or `pwd`/.." 1>&2
-                               fi
-
-                               echo '***' \(At least ${srctrigger} is missing.\) 1>&2
-                               exit 1
-                       fi
-
-                       # Set up the list of links to be made.
-                       # ${links} is the list of link names, and ${files} is the list of names to link to.
-
-                       # Make the links.
-                       while [ -n "${files}" ] ; do
-                               # set file to car of files, files to cdr of files
-                               set ${files}; file=$1; shift; files=$*
-                               set ${links}; link=$1; shift; links=$*
-
-                               if [ ! -r ${srcdir}/${file} ] ; then
-                                       echo '***' "${progname}: cannot create a link \"${link}\"," 1>&2
-                                       echo '***' "since the file \"${file}\" does not exist." 1>&2
-                                       exit 1
-                               fi
-
-                               ${remove} -f ${link}
-                               rm -f config.status
-                               # Make a symlink if possible, otherwise try a hard link
-                               ${symbolic_link} ${srcdir}/${file} ${link} 2>/dev/null || ${hard_link} ${srcdir}/${file} ${link}
-
-                               if [ ! -r ${link} ] ; then
-                                       echo '***' "${progname}: unable to link \"${link}\" to \"${srcdir}/${file}\"." 1>&2
-                                       exit 1
-                               fi
-
-                               if [ -n "${verbose}" ] ; then
-                                       echo "Linked \"${link}\" to \"${srcdir}/${file}\"."
-                               fi
-                       done
-
-                       # Create a .gdbinit file which runs the one in srcdir
-                       # and tells GDB to look there for source files.
-
-                       case ${srcdir} in
-                       .)
-                               ;;
-                       *)
-                               echo "dir ." > .gdbinit
-                               echo "dir ${srcdir}" >> .gdbinit
-                               echo "source ${srcdir}/.gdbinit" >> .gdbinit
-                               ;;
-                       esac
-
-                       # Install a makefile, and make it set VPATH
-                       # if necessary so that the sources are found.
-                       # Also change its value of srcdir.
-
-               # FIXME-someday: This business of always writing to .tem and mv back
-               # is so that I don't screw things up while developing.  Once this
-               # template is stable, these should be optimized. xoxorich.
-
-                       # Define macro CROSS_COMPILE in compilation if this is a cross-compiler.
-                       if [ "${host}" != "${target}" ] ; then
-                               echo "CROSS=-DCROSS_COMPILE" > ${Makefile}
-                               echo "ALL=start.encap" >> ${Makefile}
-                       else
-                               echo "ALL=all.internal" > ${Makefile}
-                       fi
-
-                       # set target, host, VPATH
-                       echo "host_alias = ${host_alias}" >> ${Makefile}
-                       echo "host_cpu = ${host_cpu}" >> ${Makefile}
-                       echo "host_vendor = ${host_vendor}" >> ${Makefile}
-                       echo "host_os = ${host_os}" >> ${Makefile}
-
-                       echo "target_alias = ${target_alias}" >> ${Makefile}
-                       echo "target_cpu = ${target_cpu}" >> ${Makefile}
-                       echo "target_vendor = ${target_vendor}" >> ${Makefile}
-                       echo "target_os = ${target_os}" >> ${Makefile}
-
-                       if [ -n "${subdirs}" ] ; then
-                               echo "subdir = /${hostsubdir}/${targetsubdir}" >> ${Makefile}
-                       else
-                               echo "subdir =" >> ${Makefile}
-                       fi
-
-               #       echo "workdir = `pwd`" >> ${Makefile}
-                       echo "VPATH = ${srcdir}" >> ${Makefile}
-
-                       # add "Makefile.in" (or whatever it's called)
-                       cat ${srcdir}/${Makefile_in} >> ${Makefile}
-
-                       # Conditionalize the makefile for this host.
-                       if [ -f ${srcdir}/${host_makefile_frag} ] ; then
-                               (echo "host_makefile_frag = ${srcdir}/${host_makefile_frag}" ; 
-                                       sed -e "/^####/  r ${srcdir}/${host_makefile_frag}" ${Makefile}) > Makefile.tem
-                               mv Makefile.tem ${Makefile}
-                       fi
-
-                       # Conditionalize the makefile for this target.
-                       if [ -f ${srcdir}/${target_makefile_frag} ] ; then
-                               (echo "target_makefile_frag = ${srcdir}/${target_makefile_frag}" ; 
-                                       sed -e "/^####/  r ${srcdir}/${target_makefile_frag}" ${Makefile}) > Makefile.tem
-                               mv Makefile.tem ${Makefile}
-                       fi
-
-                       # set srcdir
-                       sed "s@^srcdir = \.@srcdir = ${srcdir}@" ${Makefile} > Makefile.tem
-                       mv Makefile.tem ${Makefile}
-
-                       # set destdir
-                       if [ -n "${destdir}" ] ; then
-                               sed "s:^destdir =.*$:destdir = ${destdir}:" ${Makefile} > Makefile.tem
-                               mv Makefile.tem ${Makefile}
-                       fi
-
-                       # reset SUBDIRS
-                       sed "s:^SUBDIRS =.*$:SUBDIRS = ${configdirs}:" ${Makefile} > Makefile.tem
-                       mv Makefile.tem ${Makefile}
-
-                       # reset NONSUBDIRS
-                       sed "s:^NONSUBDIRS =.*$:NONSUBDIRS = ${noconfigdirs}:" ${Makefile} > Makefile.tem
-                       mv Makefile.tem ${Makefile}
-
-                       using=
-                       if [ -f ${srcdir}/${host_makefile_frag} ] ; then
-                               using=" using \"${host_makefile_frag}\""
-                       fi
-
-                       # remove any form feeds.
-                       sed -e "s/\f//" ${Makefile} > Makefile.tem
-                       mv Makefile.tem ${Makefile}
-
-                       if [ -f ${srcdir}/${target_makefile_frag} ] ; then
-                               if [ -z "${using}" ] ; then
-                                       andusing=" using \"${target_makefile_frag}\""
-                               else
-                                       andusing="${using} and \"${target_makefile_frag}\""
-                               fi
-                       else
-                               andusing=${using}
-                       fi
-
-                       if [ -n "${verbose}" -o -z "${recurring}" ] ; then
-                               echo "Created \"${Makefile}\"" in `pwd`${andusing}.
-                       fi
-
-#### configure.in post-target parts come in here.
-
-## end of post-target part.
-
-                       # describe the chosen configuration in config.status.
-                       # Make that file a shellscript which will reestablish
-                       # the same configuration.  Used in Makefiles to rebuild
-                       # Makefiles.
-
-                       echo "#!/bin/sh
-# ${srcname} was configured as follows:
-${srcdir}/configure" ${arguments} `if [ -z "${norecursion}" ] ; then echo +norecursion ; else true ; fi` > config.status
-                       chmod a+x config.status
-
-                       originaldir=`pwd`
-                       cd ${srcdir}
-               fi
-
-               # If there are subdirectories, then recurse. 
-               if [ -z "${norecursion}" -a -n "${configdirs}" ] ; then 
-                       for configdir in ${configdirs} ; do
-                               if [ -n "${verbose}" ] ; then
-                                       echo Configuring ${configdir}...
-                               fi
-
-                               if [ -d ${configdir} ] ; then
-                                       (cd ${configdir} ;
-                                               ./configure +recurring ${host_alias} +target=${target_alias} \
-                                                       ${verbose} ${subdirs} ${removing} +destdir=${destdir}) \
-                                               | sed 's/^/     /'
-                               else
-                                       if [ -n "${verbose}" ] ; then
-                                               echo Warning: directory \"${configdir}\" is missing.
-                                       fi
-                               fi
-                       done
-               fi
-       done # for each target
-
-       # Now build a Makefile for this host.
-       if [ -n "${subdirs}" -a ! -n "${removing}" ] ; then
-               cd ${hostsubdir}
-               cat > GNUmakefile << E!O!F
-# Makefile generated by configure for host ${host_alias}.
-
-ALL := $(shell ls -d Target-*)
-
-%:
-       $(foreach subdir,$(ALL),$(MAKE) -C $(subdir) \$@ &&) true
-
-all:
-E!O!F
-               cd ..
-       fi
-done # for each host
-
-exit 0
-
-#
-# Local Variables:
-# fill-column: 131
-# End:
-#
-
-# end of configure
diff --git a/readline/doc/history.info b/readline/doc/history.info
deleted file mode 100644 (file)
index df7651d..0000000
+++ /dev/null
@@ -1,514 +0,0 @@
-Info file history.info, produced by Makeinfo, -*- Text -*- from input
-file hist.texinfo.
-
-   This document describes the GNU History library, a programming tool
-that provides a consistent user interface for recalling lines of
-previously typed input.
-
-   Copyright (C) 1988, 1991 Free Software Foundation, Inc.
-
-   Permission is granted to make and distribute verbatim copies of
-this manual provided the copyright notice and this permission notice
-pare preserved on all copies.
-
-   Permission is granted to copy and distribute modified versions of
-this manual under the conditions for verbatim copying, provided that
-the entire resulting derived work is distributed under the terms of a
-permission notice identical to this one.
-
-   Permission is granted to copy and distribute translations of this
-manual into another language, under the above conditions for modified
-versions, except that this permission notice may be stated in a
-translation approved by the Foundation.
-
-\1f
-File: history.info,  Node: Top,  Next: Using History Interactively,  Prev: (DIR),  Up: (DIR)
-
-GNU History Library
-*******************
-
-   This document describes the GNU History library, a programming tool
-that provides a consistent user interface for recalling lines of
-previously typed input.
-
-* Menu:
-
-* Using History Interactively::          GNU History User's Manual.
-* Programming with GNU History::  GNU History Programmer's Manual.
-* Concept Index::                Index of concepts described in this manual.
-* Function and Variable Index::          Index of externally visible functions
-                                 and variables.
-
-\1f
-File: history.info,  Node: Using History Interactively,  Next: Programming with GNU History,  Prev: Top,  Up: Top
-
-Using History Interactively
-***************************
-
-   This chapter describes how to use the GNU History Library
-interactively, from a user's standpoint.  It should be considered a
-user's guide.  For information on using the GNU History Library in
-your own programs, *note Programming with GNU History::..
-
-* Menu:
-
-* History Interaction::                What it feels like using History as a user.
-
-\1f
-File: history.info,  Node: History Interaction,  Up: Using History Interactively
-
-History Interaction
-===================
-
-   The History library provides a history expansion feature that is
-similar to the history expansion in Csh.  The following text describes
-the sytax that you use to manipulate the history information.
-
-   History expansion takes place in two parts.  The first is to
-determine which line from the previous history should be used during
-substitution.  The second is to select portions of that line for
-inclusion into the current one.  The line selected from the previous
-history is called the "event", and the portions of that line that are
-acted upon are called "words".  The line is broken into words in the
-same fashion that the Bash shell does, so that several English (or
-Unix) words surrounded by quotes are considered as one word.
-
-* Menu:
-
-* Event Designators::  How to specify which history line to use.
-* Word Designators::   Specifying which words are of interest.
-* Modifiers::          Modifying the results of susbstitution.
-
-\1f
-File: history.info,  Node: Event Designators,  Next: Word Designators,  Up: History Interaction
-
-Event Designators
------------------
-
-   An event designator is a reference to a command line entry in the
-history list.
-
-`!'
-     Start a history subsititution, except when followed by a space,
-     tab, or the end of the line... = or (.
-
-`!!'
-     Refer to the previous command.  This is a synonym for `!-1'.
-
-`!n'
-     Refer to command line N.
-
-`!-n'
-     Refer to the command line N lines back.
-
-`!string'
-     Refer to the most recent command starting with STRING.
-
-`!?string'[`?']
-     Refer to the most recent command containing STRING.
-
-\1f
-File: history.info,  Node: Word Designators,  Next: Modifiers,  Prev: Event Designators,  Up: History Interaction
-
-Word Designators
-----------------
-
-   A : separates the event specification from the word designator.  It
-can be omitted if the word designator begins with a ^, $, * or %. 
-Words are numbered from the beginning of the line, with the first word
-being denoted by a 0 (zero).
-
-`0 (zero)'
-     The zero'th word.  For many applications, this is the command
-     word.
-
-`n'
-     The N'th word.
-
-`^'
-     The first argument.  that is, word 1.
-
-`$'
-     The last argument.
-
-`%'
-     The word matched by the most recent `?string?' search.
-
-`x-y'
-     A range of words; `-Y' Abbreviates `0-Y'.
-
-`*'
-     All of the words, excepting the zero'th.  This is a synonym for
-     `1-$'.  It is not an error to use * if there is just one word in
-     the event.  The empty string is returned in that case.
-
-\1f
-File: history.info,  Node: Modifiers,  Prev: Word Designators,  Up: History Interaction
-
-Modifiers
----------
-
-   After the optional word designator, you can add a sequence of one
-or more of the following modifiers, each preceded by a :.
-
-`#'
-     The entire command line typed so far.  This means the current
-     command, not the previous command, so it really isn't a word
-     designator, and doesn't belong in this section.
-
-`h'
-     Remove a trailing pathname component, leaving only the head.
-
-`r'
-     Remove a trailing suffix of the form `.'SUFFIX, leaving the
-     basename.
-
-`e'
-     Remove all but the suffix.
-
-`t'
-     Remove all leading  pathname  components, leaving the tail.
-
-`p'
-     Print the new command but do not execute it.
-
-\1f
-File: history.info,  Node: Programming with GNU History,  Next: Concept Index,  Prev: Using History Interactively,  Up: Top
-
-Programming with GNU History
-****************************
-
-   This chapter describes how to interface the GNU History Library with
-programs that you write.  It should be considered a technical guide. 
-For information on the interactive use of GNU History, *note Using
-History Interactively::..
-
-* Menu:
-
-* Introduction to History::    What is the GNU History library for?
-* History Storage::            How information is stored.
-* History Functions::          Functions that you can use.
-* History Variables::          Variables that control behaviour.
-* History Programming Example::        Example of using the GNU History Library.
-
-\1f
-File: history.info,  Node: Introduction to History,  Next: History Storage,  Up: Programming with GNU History
-
-Introduction to History
-=======================
-
-   Many programs read input from the user a line at a time.  The GNU
-history library is able to keep track of those lines, associate
-arbitrary data with each line, and utilize information from previous
-lines in making up new ones.
-
-   The programmer using the History library has available to him
-functions for remembering lines on a history stack, associating
-arbitrary data with a line, removing lines from the stack, searching
-through the stack for a line containing an arbitrary text string, and
-referencing any line on the stack directly.  In addition, a history
-"expansion" function is available which provides for a consistent user
-interface across many different programs.
-
-   The end-user using programs written with the History library has the
-benifit of a consistent user interface, with a set of well-known
-commands for manipulating the text of previous lines and using that
-text in new commands.  The basic history manipulation commands are
-similar to the history substitution used by `Csh'.
-
-   If the programmer desires, he can use the Readline library, which
-includes some history manipulation by default, and has the added
-advantage of Emacs style command line editing.
-
-\1f
-File: history.info,  Node: History Storage,  Next: History Functions,  Prev: Introduction to History,  Up: Programming with GNU History
-
-History Storage
-===============
-
-     typedef struct _hist_entry {
-       char *line;
-       char *data;
-     } HIST_ENTRY;
-
-\1f
-File: history.info,  Node: History Functions,  Next: History Variables,  Prev: History Storage,  Up: Programming with GNU History
-
-History Functions
-=================
-
-   This section describes the calling sequence for the various
-functions present in GNU History.
-
- * Function: void using_history ()
-     Begin a session in which the history functions might be used. 
-     This just initializes the interactive variables.
-
- * Function: void add_history (CHAR *STRING)
-     Place STRING at the end of the history list.  The associated data
-     field (if any) is set to `NULL'.
-
- * Function: int where_history ()
-     Returns the number which says what history element we are now
-     looking at.
-
- * Function: int history_set_pos (INT POS)
-     Set the position in the history list to POS.
-
- * Function: int history_search_pos (CHAR *STRING, INT DIRECTION, INT
-          POS)
-     Search for STRING in the history list, starting at POS, an
-     absolute index into the list.  DIRECTION, if negative, says to
-     search backwards from POS, else forwards.  Returns the absolute
-     index of the history element where STRING was found, or -1
-     otherwise.
-
- * Function: HIST_ENTRY *remove_history ();
-     Remove history element WHICH from the history.  The removed
-     element is returned to you so you can free the line, data, and
-     containing structure.
-
- * Function: void stifle_history (INT MAX)
-     Stifle the history list, remembering only MAX number of entries.
-
- * Function: int unstifle_history ();
-     Stop stifling the history.  This returns the previous amount the
-     history was stifled by.  The value is positive if the history was
-     stifled, negative if it wasn't.
-
- * Function: int read_history (CHAR *FILENAME)
-     Add the contents of FILENAME to the history list, a line at a
-     time.  If FILENAME is `NULL', then read from `~/.history'. 
-     Returns 0 if successful, or errno if not.
-
- * Function: int read_history_range (CHAR *FILENAME, INT FROM, INT TO)
-     Read a range of lines from FILENAME, adding them to the history
-     list.  Start reading at the FROM'th line and end at the TO'th.  If
-     FROM is zero, start at the beginning.  If TO is less than FROM,
-     then read until the end of the file.  If FILENAME is `NULL', then
-     read from `~/.history'.  Returns 0 if successful, or `errno' if
-     not.
-
- * Function: int write_history (CHAR *FILENAME)
-     Append the current history to FILENAME.  If FILENAME is `NULL',
-     then append the history list to `~/.history'.  Values returned
-     are as in `read_history ()'.
-
- * Function: int append_history (INT NELEMENTS, CHAR *FILENAME)
-     Append NELEMENT entries to FILENAME.  The entries appended are
-     from the end of the list minus NELEMENTS up to the end of the
-     list.
-
- * Function: HIST_ENTRY *replace_history_entry ()
-     Make the history entry at WHICH have LINE and DATA.  This returns
-     the old entry so you can dispose of the data.  In the case of an
-     invalid WHICH, a `NULL' pointer is returned.
-
- * Function: HIST_ENTRY *current_history ()
-     Return the history entry at the current position, as determined by
-     `history_offset'.  If there is no entry there, return a `NULL'
-     pointer.
-
- * Function: HIST_ENTRY *previous_history ()
-     Back up HISTORY_OFFSET to the previous history entry, and return a
-     pointer to that entry.  If there is no previous entry, return a
-     `NULL' pointer.
-
- * Function: HIST_ENTRY *next_history ()
-     Move `history_offset' forward to the next history entry, and
-     return the a pointer to that entry.  If there is no next entry,
-     return a `NULL' pointer.
-
- * Function: HIST_ENTRY **history_list ()
-     Return a `NULL' terminated array of `HIST_ENTRY' which is the
-     current input history.  Element 0 of this list is the beginning
-     of time.  If there is no history, return `NULL'.
-
- * Function: int history_search (CHAR *STRING, INT DIRECTION)
-     Search the history for STRING, starting at `history_offset'.  If
-     DIRECTION < 0, then the search is through previous entries, else
-     through subsequent.  If STRING is found, then `current_history
-     ()' is the history entry, and the value of this function is the
-     offset in the line of that history entry that the STRING was
-     found in.  Otherwise, nothing is changed, and a -1 is returned.
-
- * Function: int history_expand (CHAR *STRING, CHAR **OUTPUT)
-     Expand STRING, placing the result into OUTPUT, a pointer to a
-     string.  Returns:
-
-    `0'
-          If no expansions took place (or, if the only change in the
-          text was the de-slashifying of the history expansion
-          character),
-
-    `1'
-          if expansions did take place, or
-
-    `-1'
-          if there was an error in expansion.
-
-          If an error ocurred in expansion, then OUTPUT contains a
-     descriptive error message.
-
- * Function: char *history_arg_extract (INT FIRST, INT LAST, CHAR
-          *STRING)
-     Extract a string segment consisting of the FIRST through LAST
-     arguments present in STRING.  Arguments are broken up as in the
-     GNU Bash shell.
-
- * Function: int history_total_bytes ();
-     Return the number of bytes that the primary history entries are
-     using.  This just adds up the lengths of `the_history->lines'.
-
-\1f
-File: history.info,  Node: History Variables,  Next: History Programming Example,  Prev: History Functions,  Up: Programming with GNU History
-
-History Variables
-=================
-
-   This section describes the variables in GNU History that are
-externally visible.
-
- * Variable: int history_base
-     For convenience only.  You set this when interpreting history
-     commands.  It is the logical offset of the first history element.
-
-\1f
-File: history.info,  Node: History Programming Example,  Prev: History Variables,  Up: Programming with GNU History
-
-History Programming Example
-===========================
-
-   The following snippet of code demonstrates simple use of the GNU
-History Library.
-
-     main ()
-     {
-       char line[1024], *t;
-       int done = 0;
-     
-       line[0] = 0;
-     
-       while (!done)
-         {
-           fprintf (stdout, "history%% ");
-           t = gets (line);
-     
-           if (!t)
-             strcpy (line, "quit");
-     
-           if (line[0])
-             {
-               char *expansion;
-               int result;
-     
-               using_history ();
-     
-               result = history_expand (line, &expansion);
-               strcpy (line, expansion);
-               free (expansion);
-               if (result)
-                 fprintf (stderr, "%s\n", line);
-     
-               if (result < 0)
-                 continue;
-     
-               add_history (line);
-             }
-     
-           if (strcmp (line, "quit") == 0) done = 1;
-           if (strcmp (line, "save") == 0) write_history (0);
-           if (strcmp (line, "read") == 0) read_history (0);
-           if (strcmp (line, "list") == 0)
-             {
-               register HIST_ENTRY **the_list = history_list ();
-               register int i;
-     
-               if (the_list)
-                 for (i = 0; the_list[i]; i++)
-                   fprintf (stdout, "%d: %s\n",
-                      i + history_base, the_list[i]->line);
-             }
-           if (strncmp (line, "delete", strlen ("delete")) == 0)
-             {
-               int which;
-               if ((sscanf (line + strlen ("delete"), "%d", &which)) == 1)
-                 {
-                   HIST_ENTRY *entry = remove_history (which);
-                   if (!entry)
-                     fprintf (stderr, "No such entry %d\n", which);
-                   else
-                     {
-                       free (entry->line);
-                       free (entry);
-                     }
-                 }
-               else
-                 {
-                   fprintf (stderr, "non-numeric arg given to `delete'\n");
-                 }
-             }
-         }
-     }
-
-\1f
-File: history.info,  Node: Concept Index,  Next: Function and Variable Index,  Prev: Programming with GNU History,  Up: Top
-
-Concept Index
-*************
-
-* Menu:
-
-* event designators:                    Event Designators.
-* expansion:                            History Interaction.
-
-\1f
-File: history.info,  Node: Function and Variable Index,  Prev: Concept Index,  Up: Top
-
-Function and Variable Index
-***************************
-
-* Menu:
-
-* HIST_ENTRY **history_list:            History Functions.
-* HIST_ENTRY *current_history:          History Functions.
-* HIST_ENTRY *next_history:             History Functions.
-* HIST_ENTRY *previous_history:         History Functions.
-* HIST_ENTRY *remove_history:           History Functions.
-* HIST_ENTRY *replace_history_entry:    History Functions.
-* char *history_arg_extract:            History Functions.
-* int append_history:                   History Functions.
-* int history_base:                     History Variables.
-* int history_expand:                   History Functions.
-* int history_search:                   History Functions.
-* int history_search_pos:               History Functions.
-* int history_set_pos:                  History Functions.
-* int history_total_bytes:              History Functions.
-* int read_history:                     History Functions.
-* int read_history_range:               History Functions.
-* int unstifle_history:                 History Functions.
-* int where_history:                    History Functions.
-* int write_history:                    History Functions.
-* void add_history:                     History Functions.
-* void stifle_history:                  History Functions.
-* void using_history:                   History Functions.
-
-
-\1f
-Tag Table:
-Node: Top\7f973
-Node: Using History Interactively\7f1567
-Node: History Interaction\7f2075
-Node: Event Designators\7f3127
-Node: Word Designators\7f3770
-Node: Modifiers\7f4676
-Node: Programming with GNU History\7f5425
-Node: Introduction to History\7f6152
-Node: History Storage\7f7502
-Node: History Functions\7f7766
-Node: History Variables\7f13063
-Node: History Programming Example\7f13499
-Node: Concept Index\7f15744
-Node: Function and Variable Index\7f16030
-\1f
-End Tag Table
diff --git a/readline/doc/readline.info b/readline/doc/readline.info
deleted file mode 100644 (file)
index a93489f..0000000
+++ /dev/null
@@ -1,1720 +0,0 @@
-Info file readline.info, produced by Makeinfo, -*- Text -*- from input
-file rlman.texinfo.
-
-   This document describes the GNU Readline Library, a utility which
-aids in the consistency of user interface across discrete programs
-that need to provide a command line interface.
-
-   Copyright (C) 1988, 1991 Free Software Foundation, Inc.
-
-   Permission is granted to make and distribute verbatim copies of
-this manual provided the copyright notice and this permission notice
-pare preserved on all copies.
-
-   Permission is granted to copy and distribute modified versions of
-this manual under the conditions for verbatim copying, provided that
-the entire resulting derived work is distributed under the terms of a
-permission notice identical to this one.
-
-   Permission is granted to copy and distribute translations of this
-manual into another language, under the above conditions for modified
-versions, except that this permission notice may be stated in a
-translation approved by the Foundation.
-
-\1f
-File: readline.info,  Node: Top,  Next: Command Line Editing,  Prev: (DIR),  Up: (DIR)
-
-GNU Readline Library
-********************
-
-   This document describes the GNU Readline Library, a utility which
-aids in the consistency of user interface across discrete programs
-that need to provide a command line interface.
-
-* Menu:
-
-* Command Line Editing::          GNU Readline User's Manual.
-* Programming with GNU Readline::  GNU Readline Programmer's Manual.
-* Concept Index::                 Index of concepts described in this manual.
-* Function and Variable Index::           Index of externally visible functions
-                                  and variables.
-
-\1f
-File: readline.info,  Node: Command Line Editing,  Next: Programming with GNU Readline,  Prev: Top,  Up: Top
-
-Command Line Editing
-********************
-
-   This text describes GNU's command line editing interface.
-
-* Menu:
-
-* Introduction and Notation::  Notation used in this text.
-* Readline Interaction::       The minimum set of commands for editing a line.
-* Readline Init File::         Customizing Readline from a user's view.
-
-\1f
-File: readline.info,  Node: Introduction and Notation,  Next: Readline Interaction,  Up: Command Line Editing
-
-Introduction to Line Editing
-============================
-
-   The following paragraphs describe the notation we use to represent
-keystrokes.
-
-   The text C-k is read as `Control-K' and describes the character
-produced when the Control key is depressed and the k key is struck.
-
-   The text M-k is read as `Meta-K' and describes the character
-produced when the meta key (if you have one) is depressed, and the k
-key is struck.  If you do not have a meta key, the identical keystroke
-can be generated by typing ESC first, and then typing k.  Either
-process is known as "metafying" the k key.
-
-   The text M-C-k is read as `Meta-Control-k' and describes the
-character produced by "metafying" C-k.
-
-   In addition, several keys have their own names.  Specifically, DEL,
-ESC, LFD, SPC, RET, and TAB all stand for themselves when seen in this
-text, or in an init file (*note Readline Init File::., for more info).
-
-\1f
-File: readline.info,  Node: Readline Interaction,  Next: Readline Init File,  Prev: Introduction and Notation,  Up: Command Line Editing
-
-Readline Interaction
-====================
-
-   Often during an interactive session you type in a long line of text,
-only to notice that the first word on the line is misspelled.  The
-Readline library gives you a set of commands for manipulating the text
-as you type it in, allowing you to just fix your typo, and not forcing
-you to retype the majority of the line.  Using these editing commands,
-you move the cursor to the place that needs correction, and delete or
-insert the text of the corrections.  Then, when you are satisfied with
-the line, you simply press RETURN.  You do not have to be at the end
-of the line to press RETURN; the entire line is accepted regardless of
-the location of the cursor within the line.
-
-* Menu:
-
-* Readline Bare Essentials::   The least you need to know about Readline.
-* Readline Movement Commands:: Moving about the input line.
-* Readline Killing Commands::  How to delete text, and how to get it back!
-* Readline Arguments::         Giving numeric arguments to commands.
-
-\1f
-File: readline.info,  Node: Readline Bare Essentials,  Next: Readline Movement Commands,  Up: Readline Interaction
-
-Readline Bare Essentials
-------------------------
-
-   In order to enter characters into the line, simply type them.  The
-typed character appears where the cursor was, and then the cursor
-moves one space to the right.  If you mistype a character, you can use
-DEL to back up, and delete the mistyped character.
-
-   Sometimes you may miss typing a character that you wanted to type,
-and not notice your error until you have typed several other
-characters.  In that case, you can type C-b to move the cursor to the
-left, and then correct your mistake.  Aftwerwards, you can move the
-cursor to the right with C-f.
-
-   When you add text in the middle of a line, you will notice that
-characters to the right of the cursor get `pushed over' to make room
-for the text that you have inserted.  Likewise, when you delete text
-behind the cursor, characters to the right of the cursor get `pulled
-back' to fill in the blank space created by the removal of the text. 
-A list of the basic bare essentials for editing the text of an input
-line follows.
-
-C-b
-     Move back one character.
-
-C-f
-     Move forward one character.
-
-DEL
-     Delete the character to the left of the cursor.
-
-C-d
-     Delete the character underneath the cursor.
-
-Printing characters
-     Insert itself into the line at the cursor.
-
-C-_
-     Undo the last thing that you did.  You can undo all the way back
-     to an empty line.
-
-\1f
-File: readline.info,  Node: Readline Movement Commands,  Next: Readline Killing Commands,  Prev: Readline Bare Essentials,  Up: Readline Interaction
-
-Readline Movement Commands
---------------------------
-
-   The above table describes the most basic possible keystrokes that
-you need in order to do editing of the input line.  For your
-convenience, many other commands have been added in addition to C-b,
-C-f, C-d, and DEL.  Here are some commands for moving more rapidly
-about the line.
-
-C-a
-     Move to the start of the line.
-
-C-e
-     Move to the end of the line.
-
-M-f
-     Move forward a word.
-
-M-b
-     Move backward a word.
-
-C-l
-     Clear the screen, reprinting the current line at the top.
-
-   Notice how C-f moves forward a character, while M-f moves forward a
-word.  It is a loose convention that control keystrokes operate on
-characters while meta keystrokes operate on words.
-
-\1f
-File: readline.info,  Node: Readline Killing Commands,  Next: Readline Arguments,  Prev: Readline Movement Commands,  Up: Readline Interaction
-
-Readline Killing Commands
--------------------------
-
-   The act of "cutting" text means to delete the text from the line,
-and to save away the deleted text for later use, just as if you had
-cut the text out of the line with a pair of scissors.  There is a
-
-   "Killing" text means to delete the text from the line, but to save
-it away for later use, usually by "yanking" it back into the line.  If
-the description for a command says that it `kills' text, then you can
-be sure that you can get the text back in a different (or the same)
-place later.
-
-   Here is the list of commands for killing text.
-
-C-k
-     Kill the text from the current cursor position to the end of the
-     line.
-
-M-d
-     Kill from the cursor to the end of the current word, or if between
-     words, to the end of the next word.
-
-M-DEL
-     Kill fromthe cursor the start of the previous word, or if between
-     words, to the start of the previous word.
-
-C-w
-     Kill from the cursor to the previous whitespace.  This is
-     different than M-DEL because the word boundaries differ.
-
-   And, here is how to "yank" the text back into the line.  Yanking is
-
-C-y
-     Yank the most recently killed text back into the buffer at the
-     cursor.
-
-M-y
-     Rotate the kill-ring, and yank the new top.  You can only do this
-     if the prior command is C-y or M-y.
-
-   When you use a kill command, the text is saved in a "kill-ring". 
-Any number of consecutive kills save all of the killed text together,
-so that when you yank it back, you get it in one clean sweep.  The kill
-ring is not line specific; the text that you killed on a previously
-typed line is available to be yanked back later, when you are typing
-another line.
-
-\1f
-File: readline.info,  Node: Readline Arguments,  Prev: Readline Killing Commands,  Up: Readline Interaction
-
-Readline Arguments
-------------------
-
-   You can pass numeric arguments to Readline commands.  Sometimes the
-argument acts as a repeat count, other times it is the sign of the
-argument that is significant.  If you pass a negative argument to a
-command which normally acts in a forward direction, that command will
-act in a backward direction.  For example, to kill text back to the
-start of the line, you might type M-- C-k.
-
-   The general way to pass numeric arguments to a command is to type
-meta digits before the command.  If the first `digit' you type is a
-minus sign (-), then the sign of the argument will be negative.  Once
-you have typed one meta digit to get the argument started, you can type
-the remainder of the digits, and then the command.  For example, to
-give the C-d command an argument of 10, you could type M-1 0 C-d.
-
-\1f
-File: readline.info,  Node: Readline Init File,  Prev: Readline Interaction,  Up: Command Line Editing
-
-Readline Init File
-==================
-
-   Although the Readline library comes with a set of Emacs-like
-keybindings, it is possible that you would like to use a different set
-of keybindings.  You can customize programs that use Readline by
-putting commands in an "init" file in your home directory.  The name
-of this file is `~/.inputrc'.
-
-   When a program which uses the Readline library starts up, the
-`~/.inputrc' file is read, and the keybindings are set.
-
-   In addition, the `C-x C-r' command re-reads this init file, thus
-incorporating any changes that you might have made to it.
-
-* Menu:
-
-* Readline Init Syntax::       Syntax for the commands in `~/.inputrc'.
-* Readline Vi Mode::           Switching to `vi' mode in Readline.
-
-\1f
-File: readline.info,  Node: Readline Init Syntax,  Next: Readline Vi Mode,  Up: Readline Init File
-
-Readline Init Syntax
---------------------
-
-   There are only four constructs allowed in the `~/.inputrc' file:
-
-Variable Settings
-     You can change the state of a few variables in Readline.  You do
-     this by using the `set' command within the init file.  Here is
-     how you would specify that you wish to use Vi line editing
-     commands:
-
-          set editing-mode vi
-
-          Right now, there are only a few variables which can be set; so
-     few in fact, that we just iterate them here:
-
-    `editing-mode'
-          The `editing-mode' variable controls which editing mode you
-          are using.  By default, GNU Readline starts up in Emacs
-          editing mode, where the keystrokes are most similar to
-          Emacs.  This variable can either be set to `emacs' or `vi'.
-
-    `horizontal-scroll-mode'
-          This variable can either be set to `On' or `Off'.  Setting it
-          to `On' means that the text of the lines that you edit will
-          scroll horizontally on a single screen line when they are
-          larger than the width of the screen, instead of wrapping
-          onto a new screen line.  By default, this variable is set to
-          `Off'.
-
-    `mark-modified-lines'
-          This variable when set to `On', says to display an asterisk
-          (`*') at the starts of history lines which have been
-          modified.  This variable is off by default.
-
-    `prefer-visible-bell'
-          If this variable is set to `On' it means to use a visible
-          bell if one is available, rather than simply ringing the
-          terminal bell.  By default, the value is `Off'.
-
-Key Bindings
-     The syntax for controlling keybindings in the `~/.inputrc' file is
-     simple.  First you have to know the name of the command that you
-     want to change.  The following pages contain tables of the
-     command name, the default keybinding, and a short description of
-     what the command does.
-
-     Once you know the name of the command, simply place the name of
-     the key you wish to bind the command to, a colon, and then the
-     name of the command on a line in the `~/.inputrc' file.  The name
-     of the key can be expressed in different ways, depending on which
-     is most comfortable for you.
-
-    KEYNAME: FUNCTION-NAME or MACRO
-          KEYNAME is the name of a key spelled out in English.  For
-          example:
-
-               Control-u: universal-argument
-               Meta-Rubout: backward-kill-word
-               Control-o: ">&output"
-
-                    In the above example, `C-u' is bound to the function
-          `universal-argument', and `C-o' is bound to run the macro
-          expressed on the right hand side (that is, to insert the text
-          `>&output' into the line).
-
-    "KEYSEQ": FUNCTION-NAME or MACRO
-          KEYSEQ differs from KEYNAME above in that strings denoting
-          an entire key sequence can be specified.  Simply place the
-          key sequence in double quotes.  GNU Emacs style key escapes
-          can be used, as in the following example:
-
-               "\C-u": universal-argument
-               "\C-x\C-r": re-read-init-file
-               "\e[11~": "Function Key 1"
-
-                    In the above example, `C-u' is bound to the function
-          `universal-argument' (just as it was in the first example),
-          `C-x C-r' is bound to the function `re-read-init-file', and
-          `ESC [ 1 1 ~' is bound to insert the text `Function Key 1'.
-
-* Menu:
-
-* Commands For Moving::                Moving about the line.
-* Commands For History::       Getting at previous lines.
-* Commands For Text::          Commands for changing text.
-* Commands For Killing::       Commands for killing and yanking.
-* Numeric Arguments::          Specifying numeric arguments, repeat counts.
-* Commands For Completion::    Getting Readline to do the typing for you.
-* Miscellaneous Commands::     Other miscillaneous commands.
-
-\1f
-File: readline.info,  Node: Commands For Moving,  Next: Commands For History,  Up: Readline Init Syntax
-
-Commands For Moving
-...................
-
-`beginning-of-line (C-a)'
-     Move to the start of the current line.
-
-`end-of-line (C-e)'
-     Move to the end of the line.
-
-`forward-char (C-f)'
-     Move forward a character.
-
-`backward-char (C-b)'
-     Move back a character.
-
-`forward-word (M-f)'
-     Move forward to the end of the next word.
-
-`backward-word (M-b)'
-     Move back to the start of this, or the previous, word.
-
-`clear-screen (C-l)'
-     Clear the screen leaving the current line at the top of the
-     screen.
-
-\1f
-File: readline.info,  Node: Commands For History,  Next: Commands For Text,  Prev: Commands For Moving,  Up: Readline Init Syntax
-
-Commands For Manipulating The History
-.....................................
-
-`accept-line (Newline, Return)'
-     Accept the line regardless of where the cursor is.  If this line
-     is non-empty, add it to the history list.  If this line was a
-     history line, then restore the history line to its original state.
-
-`previous-history (C-p)'
-     Move `up' through the history list.
-
-`next-history (C-n)'
-     Move `down' through the history list.
-
-`beginning-of-history (M-<)'
-     Move to the first line in the history.
-
-`end-of-history (M->)'
-     Move to the end of the input history, i.e., the line you are
-     entering!
-
-`reverse-search-history (C-r)'
-     Search backward starting at the current line and moving `up'
-     through the history as necessary.  This is an incremental search.
-
-`forward-search-history (C-s)'
-     Search forward starting at the current line and moving `down'
-     through the the history as neccessary.
-
-\1f
-File: readline.info,  Node: Commands For Text,  Next: Commands For Killing,  Prev: Commands For History,  Up: Readline Init Syntax
-
-Commands For Changing Text
-..........................
-
-`delete-char (C-d)'
-     Delete the character under the cursor.  If the cursor is at the
-     beginning of the line, and there are no characters in the line,
-     and the last character typed was not C-d, then return EOF.
-
-`backward-delete-char (Rubout)'
-     Delete the character behind the cursor.  A numeric arg says to
-     kill the characters instead of deleting them.
-
-`quoted-insert (C-q, C-v)'
-     Add the next character that you type to the line verbatim.  This
-     is how to insert things like C-q for example.
-
-`tab-insert (M-TAB)'
-     Insert a tab character.
-
-`self-insert (a, b, A, 1, !, ...)'
-     Insert yourself.
-
-`transpose-chars (C-t)'
-     Drag the character before point forward over the character at
-     point.  Point moves forward as well.  If point is at the end of
-     the line, then transpose the two characters before point. 
-     Negative args don't work.
-
-`transpose-words (M-t)'
-     Drag the word behind the cursor past the word in front of the
-     cursor moving the cursor over that word as well.
-
-`upcase-word (M-u)'
-     Uppercase the current (or following) word.  With a negative
-     argument, do the previous word, but do not move point.
-
-`downcase-word (M-l)'
-     Lowercase the current (or following) word.  With a negative
-     argument, do the previous word, but do not move point.
-
-`capitalize-word (M-c)'
-     Uppercase the current (or following) word.  With a negative
-     argument, do the previous word, but do not move point.
-
-\1f
-File: readline.info,  Node: Commands For Killing,  Next: Numeric Arguments,  Prev: Commands For Text,  Up: Readline Init Syntax
-
-Killing And Yanking
-...................
-
-`kill-line (C-k)'
-     Kill the text from the current cursor position to the end of the
-     line.
-
-`backward-kill-line ()'
-     Kill backward to the beginning of the line.  This is normally
-     unbound.
-
-`kill-word (M-d)'
-     Kill from the cursor to the end of the current word, or if between
-     words, to the end of the next word.
-
-`backward-kill-word (M-DEL)'
-     Kill the word behind the cursor.
-
-`unix-line-discard (C-u)'
-     Do what C-u used to do in Unix line input.  We save the killed
-     text on the kill-ring, though.
-
-`unix-word-rubout (C-w)'
-     Do what C-w used to do in Unix line input.  The killed text is
-     saved on the kill-ring.  This is different than
-     backward-kill-word because the word boundaries differ.
-
-`yank (C-y)'
-     Yank the top of the kill ring into the buffer at point.
-
-`yank-pop (M-y)'
-     Rotate the kill-ring, and yank the new top.  You can only do this
-     if the prior command is yank or yank-pop.
-
-\1f
-File: readline.info,  Node: Numeric Arguments,  Next: Commands For Completion,  Prev: Commands For Killing,  Up: Readline Init Syntax
-
-Specifying Numeric Arguments
-............................
-
-`digit-argument (M-0, M-1, ... M--)'
-     Add this digit to the argument already accumulating, or start a
-     new argument.  M-- starts a negative argument.
-
-`universal-argument ()'
-     Do what C-u does in emacs.  By default, this is not bound.
-
-\1f
-File: readline.info,  Node: Commands For Completion,  Next: Miscellaneous Commands,  Prev: Numeric Arguments,  Up: Readline Init Syntax
-
-Letting Readline Type For You
-.............................
-
-`complete (TAB)'
-     Attempt to do completion on the text before point.  This is
-     implementation defined.  Generally, if you are typing a filename
-     argument, you can do filename completion; if you are typing a
-     command, you can do command completion, if you are typing in a
-     symbol to GDB, you can do symbol name completion, if you are
-     typing in a variable to Bash, you can do variable name
-     completion...
-
-`possible-completions (M-?)'
-     List the possible completions of the text before point.
-
-\1f
-File: readline.info,  Node: Miscellaneous Commands,  Prev: Commands For Completion,  Up: Readline Init Syntax
-
-Some Miscellaneous Commands
-...........................
-
-`re-read-init-file (C-x C-r)'
-     Read in the contents of your `~/.inputrc' file, and incorporate
-     any bindings found there.
-
-`abort (C-g)'
-     Ding!  Stops things.
-
-`do-uppercase-version (M-a, M-b, ...)'
-     Run the command that is bound to your uppercase brother.
-
-`prefix-meta (ESC)'
-     Make the next character that you type be metafied.  This is for
-     people without a meta key.  Typing `ESC f' is equivalent to typing
-     `M-f'.
-
-`undo (C-_)'
-     Incremental undo, separately remembered for each line.
-
-`revert-line (M-r)'
-     Undo all changes made to this line.  This is like typing the
-     `undo' command enough times to get back to the beginning.
-
-\1f
-File: readline.info,  Node: Readline Vi Mode,  Prev: Readline Init Syntax,  Up: Readline Init File
-
-Readline Vi Mode
-----------------
-
-   While the Readline library does not have a full set of Vi editing
-functions, it does contain enough to allow simple editing of the line.
-
-   In order to switch interactively between Emacs and Vi editing
-modes, use the command M-C-j (toggle-editing-mode).
-
-   When you enter a line in Vi mode, you are already placed in
-`insertion' mode, as if you had typed an `i'.  Pressing ESC switches
-you into `edit' mode, where you can edit the text of the line with the
-standard Vi movement keys, move to previous history lines with `k',
-and following lines with `j', and so forth.
-
-   This document describes the GNU Readline Library, a utility for
-aiding in the consitency of user interface across discrete programs
-that need to provide a command line interface.
-
-   Copyright (C) 1988 Free Software Foundation, Inc.
-
-   Permission is granted to make and distribute verbatim copies of
-this manual provided the copyright notice and this permission notice
-pare preserved on all copies.
-
-   Permission is granted to copy and distribute modified versions of
-this manual under the conditions for verbatim copying, provided that
-the entire resulting derived work is distributed under the terms of a
-permission notice identical to this one.
-
-   Permission is granted to copy and distribute translations of this
-manual into another language, under the above conditions for modified
-versions, except that this permission notice may be stated in a
-translation approved by the Foundation.
-
-\1f
-File: readline.info,  Node: Programming with GNU Readline,  Next: Concept Index,  Prev: Command Line Editing,  Up: Top
-
-Programming with GNU Readline
-*****************************
-
-   This manual describes the interface between the GNU Readline
-Library and user programs.  If you are a programmer, and you wish to
-include the features found in GNU Readline in your own programs, such
-as completion, line editing, and interactive history manipulation,
-this documentation is for you.
-
-* Menu:
-
-* Default Behaviour::  Using the default behaviour of Readline.
-* Custom Functions::   Adding your own functions to Readline.
-* Custom Completers::  Supplanting or supplementing Readline's
-                       completion functions.
-
-\1f
-File: readline.info,  Node: Default Behaviour,  Next: Custom Functions,  Up: Programming with GNU Readline
-
-Default Behaviour
-=================
-
-   Many programs provide a command line interface, such as `mail',
-`ftp', and `sh'.  For such programs, the default behaviour of Readline
-is sufficient.  This section describes how to use Readline in the
-simplest way possible, perhaps to replace calls in your code to `gets
-()'.
-
-   The function `readline' prints a prompt and then reads and returns
-a single line of text from the user.  The line which `readline ()'
-returns is allocated with `malloc ()'; you should `free ()' the line
-when you are done with it.  The declaration for `readline' in ANSI C is
-
-     `char *readline (char *PROMPT);'
-
-   So, one might say
-
-     `char *line = readline ("Enter a line: ");'
-
-   in order to read a line of text from the user.
-
-   The line which is returned has the final newline removed, so only
-the text of the line remains.
-
-   If readline encounters an `EOF' while reading the line, and the
-line is empty at that point, then `(char *)NULL' is returned. 
-Otherwise, the line is ended just as if a newline was typed.
-
-   If you want the user to be able to get at the line later, (with C-p
-for example), you must call `add_history ()' to save the line away in
-a "history" list of such lines.
-
-     `add_history (line)';
-
-   For full details on the GNU History Library, see the associated
-manual.
-
-   It is polite to avoid saving empty lines on the history list, since
-it is rare than someone has a burning need to reuse a blank line. 
-Here is a function which usefully replaces the standard `gets ()'
-library function:
-
-     /* A static variable for holding the line. */
-     static char *line_read = (char *)NULL;
-     
-     /* Read a string, and return a pointer to it.  Returns NULL on EOF. */
-     char *
-     do_gets ()
-     {
-       /* If the buffer has already been allocated, return the memory
-          to the free pool. */
-       if (line_read != (char *)NULL)
-         {
-           free (line_read);
-           line_read = (char *)NULL;
-         }
-     
-       /* Get a line from the user. */
-       line_read = readline ("");
-     
-       /* If the line has any text in it, save it on the history. */
-       if (line_read && *line_read)
-         add_history (line_read);
-     
-       return (line_read);
-     }
-
-   The above code gives the user the default behaviour of TAB
-completion: completion on file names.  If you do not want readline to
-complete on filenames, you can change the binding of the TAB key with
-`rl_bind_key ()'.
-
-     `int rl_bind_key (int KEY, (int (*)())FUNCTION);'
-
-   `rl_bind_key ()' takes 2 arguments; KEY is the character that you
-want to bind, and FUNCTION is the address of the function to run when
-KEY is pressed.  Binding TAB to `rl_insert ()' makes TAB just insert
-itself.
-
-   `rl_bind_key ()' returns non-zero if KEY is not a valid ASCII
-character code (between 0 and 255).
-
-     `rl_bind_key ('\t', rl_insert);'
-
-   This code should be executed once at the start of your program; you
-might write a function called `initialize_readline ()' which performs
-this and other desired initializations, such as installing custom
-completers, etc.
-
-\1f
-File: readline.info,  Node: Custom Functions,  Next: Custom Completers,  Prev: Default Behaviour,  Up: Programming with GNU Readline
-
-Custom Functions
-================
-
-   Readline provides a great many functions for manipulating the text
-of the line.  But it isn't possible to anticipate the needs of all
-programs.  This section describes the various functions and variables
-defined in within the Readline library which allow a user program to
-add customized functionality to Readline.
-
-* Menu:
-
-* The Function Type::  C declarations to make code readable.
-* Function Naming::    How to give a function you write a name.
-* Keymaps::            Making keymaps.
-* Binding Keys::       Changing Keymaps.
-* Function Writing::   Variables and calling conventions.
-* Allowing Undoing::   How to make your functions undoable.
-
-\1f
-File: readline.info,  Node: The Function Type,  Next: Function Naming,  Up: Custom Functions
-
-The Function Type
------------------
-
-   For the sake of readabilty, we declare a new type of object, called
-"Function".  A `Function' is a C language function which returns an
-`int'.  The type declaration for `Function' is:
-
-`typedef int Function ();'
-
-   The reason for declaring this new type is to make it easier to write
-code describing pointers to C functions.  Let us say we had a variable
-called FUNC which was a pointer to a function.  Instead of the classic
-C declaration
-
-   `int (*)()func;'
-
-   we have
-
-   `Function *func;'
-
-\1f
-File: readline.info,  Node: Function Naming,  Next: Keymaps,  Prev: The Function Type,  Up: Custom Functions
-
-Naming a Function
------------------
-
-   The user can dynamically change the bindings of keys while using
-Readline.  This is done by representing the function with a descriptive
-name.  The user is able to type the descriptive name when referring to
-the function.  Thus, in an init file, one might find
-
-     Meta-Rubout:      backward-kill-word
-
-   This binds the keystroke Meta-Rubout to the function
-*descriptively* named `backward-kill-word'.  You, as the programmer,
-should bind the functions you write to descriptive names as well. 
-Readline provides a function for doing that:
-
- * Function: rl_add_defun (CHAR *NAME, FUNCTION *FUNCTION, INT KEY)
-     Add NAME to the list of named functions.  Make FUNCTION be the
-     function that gets called.  If KEY is not -1, then bind it to
-     FUNCTION using `rl_bind_key ()'.
-
-   Using this function alone is sufficient for most applications.  It
-is the recommended way to add a few functions to the default functions
-that Readline has built in already.  If you need to do more or
-different things than adding a function to Readline, you may need to
-use the underlying functions described below.
-
-\1f
-File: readline.info,  Node: Keymaps,  Next: Binding Keys,  Prev: Function Naming,  Up: Custom Functions
-
-Selecting a Keymap
-------------------
-
-   Key bindings take place on a "keymap".  The keymap is the
-association between the keys that the user types and the functions that
-get run.  You can make your own keymaps, copy existing keymaps, and
-tell Readline which keymap to use.
-
- * Function: Keymap rl_make_bare_keymap ()
-     Returns a new, empty keymap.  The space for the keymap is
-     allocated with `malloc ()'; you should `free ()' it when you are
-     done.
-
- * Function: Keymap rl_copy_keymap (KEYMAP MAP)
-     Return a new keymap which is a copy of MAP.
-
- * Function: Keymap rl_make_keymap ()
-     Return a new keymap with the printing characters bound to
-     rl_insert, the lowercase Meta characters bound to run their
-     equivalents, and the Meta digits bound to produce numeric
-     arguments.
-
-\1f
-File: readline.info,  Node: Binding Keys,  Next: Function Writing,  Prev: Keymaps,  Up: Custom Functions
-
-Binding Keys
-------------
-
-   You associate keys with functions through the keymap.  Here are
-functions for doing that.
-
- * Function: int rl_bind_key (INT KEY, FUNCTION *FUNCTION)
-     Binds KEY to FUNCTION in the currently selected keymap.  Returns
-     non-zero in the case of an invalid KEY.
-
- * Function: int rl_bind_key_in_map (INT KEY, FUNCTION *FUNCTION,
-          KEYMAP MAP)
-     Bind KEY to FUNCTION in MAP.  Returns non-zero in the case of an
-     invalid KEY.
-
- * Function: int rl_unbind_key (INT KEY)
-     Make KEY do nothing in the currently selected keymap.  Returns
-     non-zero in case of error.
-
- * Function: int rl_unbind_key_in_map (INT KEY, KEYMAP MAP)
-     Make KEY be bound to the null function in MAP.  Returns non-zero
-     in case of error.
-
- * Function: rl_generic_bind (INT TYPE, CHAR *KEYSEQ, CHAR *DATA,
-          KEYMAP MAP)
-     Bind the key sequence represented by the string KEYSEQ to the
-     arbitrary pointer DATA.  TYPE says what kind of data is pointed
-     to by DATA; right now this can be a function (`ISFUNC'), a macro
-     (`ISMACR'), or a keymap (`ISKMAP').  This makes new keymaps as
-     necessary.  The initial place to do bindings is in MAP.
-
-\1f
-File: readline.info,  Node: Function Writing,  Next: Allowing Undoing,  Prev: Binding Keys,  Up: Custom Functions
-
-Writing a New Function
-----------------------
-
-   In order to write new functions for Readline, you need to know the
-calling conventions for keyboard invoked functions, and the names of
-the variables that describe the current state of the line gathered so
-far.
-
- * Variable: char *rl_line_buffer
-     This is the line gathered so far.  You are welcome to modify the
-     contents of this, but see Undoing, below.
-
- * Variable: int rl_point
-     The offset of the current cursor position in RL_LINE_BUFFER.
-
- * Variable: int rl_end
-     The number of characters present in `rl_line_buffer'.  When
-     `rl_point' is at the end of the line, then `rl_point' and
-     `rl_end' are equal.
-
-   The calling sequence for a command `foo' looks like
-
-     `foo (int count, int key)'
-
-   where COUNT is the numeric argument (or 1 if defaulted) and KEY is
-the key that invoked this function.
-
-   It is completely up to the function as to what should be done with
-the numeric argument; some functions use it as a repeat count, other
-functions as a flag, and some choose to ignore it.  In general, if a
-function uses the numeric argument as a repeat count, it should be able
-to do something useful with a negative argument as well as a positive
-argument.  At the very least, it should be aware that it can be passed
-a negative argument.
-
-\1f
-File: readline.info,  Node: Allowing Undoing,  Prev: Function Writing,  Up: Custom Functions
-
-Allowing Undoing
-----------------
-
-   Supporting the undo command is a painless thing to do, and makes
-your functions much more useful to the end user.  It is certainly easy
-to try something if you know you can undo it.  I could use an undo
-function for the stock market.
-
-   If your function simply inserts text once, or deletes text once,
-and it calls `rl_insert_text ()' or `rl_delete_text ()' to do it, then
-undoing is already done for you automatically, and you can safely skip
-this section.
-
-   If you do multiple insertions or multiple deletions, or any
-combination of these operations, you should group them together into
-one operation.  This can be done with `rl_begin_undo_group ()' and
-`rl_end_undo_group ()'.
-
- * Function: rl_begin_undo_group ()
-     Begins saving undo information in a group construct.  The undo
-     information usually comes from calls to `rl_insert_text ()' and
-     `rl_delete_text ()', but they could be direct calls to
-     `rl_add_undo ()'.
-
- * Function: rl_end_undo_group ()
-     Closes the current undo group started with `rl_begin_undo_group
-     ()'.  There should be exactly one call to `rl_end_undo_group ()'
-     for every call to `rl_begin_undo_group ()'.
-
-   Finally, if you neither insert nor delete text, but directly modify
-the existing text (e.g. change its case), you call `rl_modifying ()'
-once, just before you modify the text.  You must supply the indices of
-the text range that you are going to modify.
-
- * Function: rl_modifying (INT START, INT END)
-     Tell Readline to save the text between START and END as a single
-     undo unit.  It is assumed that subsequent to this call you will
-     modify that range of text in some way.
-
-An Example
-----------
-
-   Here is a function which changes lowercase characters to the
-uppercase equivalents, and uppercase characters to the lowercase
-equivalents.  If this function was bound to `M-c', then typing `M-c'
-would change the case of the character under point.  Typing `10 M-c'
-would change the case of the following 10 characters, leaving the
-cursor on the last character changed.
-
-     /* Invert the case of the COUNT following characters. */
-     invert_case_line (count, key)
-          int count, key;
-     {
-       register int start, end;
-     
-       start = rl_point;
-     
-       if (count < 0)
-         {
-           direction = -1;
-           count = -count;
-         }
-       else
-         direction = 1;
-     
-       /* Find the end of the range to modify. */
-       end = start + (count * direction);
-     
-       /* Force it to be within range. */
-       if (end > rl_end)
-         end = rl_end;
-       else if (end < 0)
-         end = -1;
-     
-       if (start > end)
-         {
-           int temp = start;
-           start = end;
-           end = temp;
-         }
-     
-       if (start == end)
-         return;
-     
-       /* Tell readline that we are modifying the line, so save the undo
-          information. */
-       rl_modifying (start, end);
-     
-       for (; start != end; start += direction)
-         {
-           if (uppercase_p (rl_line_buffer[start]))
-             rl_line_buffer[start] = to_lower (rl_line_buffer[start]);
-           else if (lowercase_p (rl_line_buffer[start]))
-             rl_line_buffer[start] = to_upper (rl_line_buffer[start]);
-         }
-       /* Move point to on top of the last character changed. */
-       rl_point = end - direction;
-     }
-
-\1f
-File: readline.info,  Node: Custom Completers,  Prev: Custom Functions,  Up: Programming with GNU Readline
-
-Custom Completers
-=================
-
-   Typically, a program that reads commands from the user has a way of
-disambiguating commands and data.  If your program is one of these,
-then it can provide completion for either commands, or data, or both
-commands and data.  The following sections describe how your program
-and Readline cooperate to provide this service to end users.
-
-* Menu:
-
-* How Completing Works::       The logic used to do completion.
-* Completion Functions::       Functions provided by Readline.
-* Completion Variables::       Variables which control completion.
-* A Short Completion Example:: An example of writing completer subroutines.
-
-\1f
-File: readline.info,  Node: How Completing Works,  Next: Completion Functions,  Up: Custom Completers
-
-How Completing Works
---------------------
-
-   In order to complete some text, the full list of possible
-completions must be available.  That is to say, it is not possible to
-accurately expand a partial word without knowing what all of the
-possible words that make sense in that context are.  The GNU Readline
-library provides the user interface to completion, and additionally,
-two of the most common completion functions; filename and username. 
-For completing other types of text, you must write your own completion
-function.  This section describes exactly what those functions must
-do, and provides an example function.
-
-   There are three major functions used to perform completion:
-
-  1. The user-interface function `rl_complete ()'.  This function is
-     called interactively with the same calling conventions as other
-     functions in readline intended for interactive use; i.e. COUNT,
-     and INVOKING-KEY.  It isolates the word to be completed and calls
-     `completion_matches ()' to generate a list of possible
-     completions.  It then either lists the possible completions or
-     actually performs the completion, depending on which behaviour is
-     desired.
-
-  2. The internal function `completion_matches ()' uses your
-     "generator" function to generate the list of possible matches, and
-     then returns the array of these matches.  You should place the
-     address of your generator function in
-     `rl_completion_entry_function'.
-
-  3. The generator function is called repeatedly from
-     `completion_matches ()', returning a string each time.  The
-     arguments to the generator function are TEXT and STATE.  TEXT is
-     the partial word to be completed.  STATE is zero the first time
-     the function is called, and a positive non-zero integer for each
-     subsequent call.  When the generator function returns `(char
-     *)NULL' this signals `completion_matches ()' that there are no
-     more possibilities left.
-
- * Function: rl_complete (INT IGNORE, INT INVOKING_KEY)
-     Complete the word at or before point.  You have supplied the
-     function that does the initial simple matching selection
-     algorithm (see `completion_matches ()').  The default is to do
-     filename completion.
-
-   Note that `rl_complete ()' has the identical calling conventions as
-any other key-invokable function; this is because by default it is
-bound to the `TAB' key.
-
- * Variable: Function *rl_completion_entry_function
-     This is a pointer to the generator function for
-     `completion_matches ()'.  If the value of
-     `rl_completion_entry_function' is `(Function *)NULL' then the
-     default filename generator function is used, namely
-     `filename_entry_function ()'.
-
-\1f
-File: readline.info,  Node: Completion Functions,  Next: Completion Variables,  Prev: How Completing Works,  Up: Custom Completers
-
-Completion Functions
---------------------
-
-   Here is the complete list of callable completion functions present
-in Readline.
-
- * Function: rl_complete_internal (INT WHAT_TO_DO)
-     Complete the word at or before point.  WHAT_TO_DO says what to do
-     with the completion.  A value of `?' means list the possible
-     completions.  `TAB' means do standard completion.  `*' means
-     insert all of the possible completions.
-
- * Function: rl_complete (INT IGNORE, INT INVOKING_KEY)
-     Complete the word at or before point.  You have supplied the
-     function that does the initial simple matching selection
-     algorithm (see `completion_matches ()').  The default is to do
-     filename completion.  This just calls `rl_complete_internal ()'
-     with an argument of `TAB'.
-
- * Function: rl_possible_completions ()
-     List the possible completions.  See description of `rl_complete
-     ()'.  This just calls `rl_complete_internal ()' with an argument
-     of `?'.
-
- * Function: char **completion_matches (CHAR *TEXT, CHAR
-          *(*ENTRY_FUNCTION) ())
-     Returns an array of `(char *)' which is a list of completions for
-     TEXT.  If there are no completions, returns `(char **)NULL'.  The
-     first entry in the returned array is the substitution for TEXT. 
-     The remaining entries are the possible completions.  The array is
-     terminated with a `NULL' pointer.
-
-     ENTRY_FUNCTION is a function of two args, and returns a `(char
-     *)'.  The first argument is TEXT.  The second is a state
-     argument; it is zero on the first call, and non-zero on subsequent
-     calls.  It returns a `NULL'  pointer to the caller when there are
-     no more matches.
-
- * Function: char *filename_completion_function (CHAR *TEXT, INT STATE)
-     A generator function for filename completion in the general case.
-      Note that completion in the Bash shell is a little different
-     because of all the pathnames that must be followed when looking
-     up the completion for a command.
-
- * Function: char *username_completion_function (CHAR *TEXT, INT STATE)
-     A completion generator for usernames.  TEXT contains a partial
-     username preceded by a random character (usually `~').
-
-\1f
-File: readline.info,  Node: Completion Variables,  Next: A Short Completion Example,  Prev: Completion Functions,  Up: Custom Completers
-
-Completion Variables
---------------------
-
- * Variable: Function *rl_completion_entry_function
-     A pointer to the generator function for `completion_matches ()'. 
-     `NULL' means to use `filename_entry_function ()', the default
-     filename completer.
-
- * Variable: Function *rl_attempted_completion_function
-     A pointer to an alternative function to create matches.  The
-     function is called with TEXT, START, and END.  START and END are
-     indices in `rl_line_buffer' saying what the boundaries of TEXT
-     are.  If this function exists and returns `NULL' then
-     `rl_complete ()' will call the value of
-     `rl_completion_entry_function' to generate matches, otherwise the
-     array of strings returned will be used.
-
- * Variable: int rl_completion_query_items
-     Up to this many items will be displayed in response to a
-     possible-completions call.  After that, we ask the user if she is
-     sure she wants to see them all.  The default value is 100.
-
- * Variable: char *rl_basic_word_break_characters
-     The basic list of characters that signal a break between words
-     for the completer routine.  The contents of this variable is what
-     breaks words in the Bash shell, i.e. " \t\n\"\\'`@$><=;|&{(".
-
- * Variable: char *rl_completer_word_break_characters
-     The list of characters that signal a break between words for
-     `rl_complete_internal ()'.  The default list is the contents of
-     `rl_basic_word_break_characters'.
-
- * Variable: char *rl_special_prefixes
-     The list of characters that are word break characters, but should
-     be left in TEXT when it is passed to the completion function. 
-     Programs can use this to help determine what kind of completing
-     to do.
-
- * Variable: int rl_ignore_completion_duplicates
-     If non-zero, then disallow duplicates in the matches.  Default is
-     1.
-
- * Variable: int rl_filename_completion_desired
-     Non-zero means that the results of the matches are to be treated
-     as filenames.  This is *always* zero on entry, and can only be
-     changed within a completion entry generator function.
-
- * Variable: Function *rl_ignore_some_completions_function
-     This function, if defined, is called by the completer when real
-     filename completion is done, after all the matching names have
-     been generated.  It is passed a `NULL' terminated array of `(char
-     *)' known as MATCHES in the code.  The 1st element (`matches[0]')
-     is the maximal substring that is common to all matches. This
-     function can re-arrange the list of matches as required, but each
-     deleted element of the array must be `free()''d.
-
-\1f
-File: readline.info,  Node: A Short Completion Example,  Prev: Completion Variables,  Up: Custom Completers
-
-A Short Completion Example
---------------------------
-
-   Here is a small application demonstrating the use of the GNU
-Readline library.  It is called `fileman', and the source code resides
-in `readline/examples/fileman.c'.  This sample application provides
-completion of command names, line editing features, and access to the
-history list.
-
-     /* fileman.c -- A tiny application which demonstrates how to use the
-        GNU Readline library.  This application interactively allows users
-        to manipulate files and their modes. */
-     
-     #include <stdio.h>
-     #include <readline/readline.h>
-     #include <readline/history.h>
-     #include <sys/types.h>
-     #include <sys/file.h>
-     #include <sys/stat.h>
-     #include <sys/errno.h>
-     
-     /* The names of functions that actually do the manipulation. */
-     int com_list (), com_view (), com_rename (), com_stat (), com_pwd ();
-     int com_delete (), com_help (), com_cd (), com_quit ();
-     
-     /* A structure which contains information on the commands this program
-        can understand. */
-     
-     typedef struct {
-       char *name;                   /* User printable name of the function. */
-       Function *func;               /* Function to call to do the job. */
-       char *doc;                    /* Documentation for this function.  */
-     } COMMAND;
-     
-     COMMAND commands[] = {
-       { "cd", com_cd, "Change to directory DIR" },
-       { "delete", com_delete, "Delete FILE" },
-       { "help", com_help, "Display this text" },
-       { "?", com_help, "Synonym for `help'" },
-       { "list", com_list, "List files in DIR" },
-       { "ls", com_list, "Synonym for `list'" },
-       { "pwd", com_pwd, "Print the current working directory" },
-       { "quit", com_quit, "Quit using Fileman" },
-       { "rename", com_rename, "Rename FILE to NEWNAME" },
-       { "stat", com_stat, "Print out statistics on FILE" },
-       { "view", com_view, "View the contents of FILE" },
-       { (char *)NULL, (Function *)NULL, (char *)NULL }
-     };
-     
-     /* The name of this program, as taken from argv[0]. */
-     char *progname;
-     
-     /* When non-zero, this global means the user is done using this program. */
-     int done = 0;
-     
-     main (argc, argv)
-          int argc;
-          char **argv;
-     {
-       progname = argv[0];
-     
-       initialize_readline ();       /* Bind our completer. */
-     
-       /* Loop reading and executing lines until the user quits. */
-       while (!done)
-         {
-           char *line;
-     
-           line = readline ("FileMan: ");
-     
-           if (!line)
-             {
-               done = 1;             /* Encountered EOF at top level. */
-             }
-           else
-             {
-               /* Remove leading and trailing whitespace from the line.
-                  Then, if there is anything left, add it to the history list
-                  and execute it. */
-               stripwhite (line);
-     
-               if (*line)
-                 {
-                   add_history (line);
-                   execute_line (line);
-                 }
-             }
-     
-           if (line)
-             free (line);
-         }
-       exit (0);
-     }
-     
-     /* Execute a command line. */
-     execute_line (line)
-          char *line;
-     {
-       register int i;
-       COMMAND *find_command (), *command;
-       char *word;
-     
-       /* Isolate the command word. */
-       i = 0;
-       while (line[i] && !whitespace (line[i]))
-         i++;
-     
-       word = line;
-     
-       if (line[i])
-         line[i++] = '\0';
-     
-       command = find_command (word);
-     
-       if (!command)
-         {
-           fprintf (stderr, "%s: No such command for FileMan.\n", word);
-           return;
-         }
-     
-       /* Get argument to command, if any. */
-       while (whitespace (line[i]))
-         i++;
-     
-       word = line + i;
-     
-       /* Call the function. */
-       (*(command->func)) (word);
-     }
-     
-     /* Look up NAME as the name of a command, and return a pointer to that
-        command.  Return a NULL pointer if NAME isn't a command name. */
-     COMMAND *
-     find_command (name)
-          char *name;
-     {
-       register int i;
-     
-       for (i = 0; commands[i].name; i++)
-         if (strcmp (name, commands[i].name) == 0)
-           return (&commands[i]);
-     
-       return ((COMMAND *)NULL);
-     }
-     
-     /* Strip whitespace from the start and end of STRING. */
-     stripwhite (string)
-          char *string;
-     {
-       register int i = 0;
-     
-       while (whitespace (string[i]))
-         i++;
-     
-       if (i)
-         strcpy (string, string + i);
-     
-       i = strlen (string) - 1;
-     
-       while (i > 0 && whitespace (string[i]))
-         i--;
-     
-       string[++i] = '\0';
-     }
-     
-     /* **************************************************************** */
-     /*                                                                  */
-     /*                  Interface to Readline Completion                */
-     /*                                                                  */
-     /* **************************************************************** */
-     
-     /* Tell the GNU Readline library how to complete.  We want to try to complete
-        on command names if this is the first word in the line, or on filenames
-        if not. */
-     initialize_readline ()
-     {
-       char **fileman_completion ();
-     
-       /* Allow conditional parsing of the ~/.inputrc file. */
-       rl_readline_name = "FileMan";
-     
-       /* Tell the completer that we want a crack first. */
-       rl_attempted_completion_function = (Function *)fileman_completion;
-     }
-     
-     /* Attempt to complete on the contents of TEXT.  START and END show the
-        region of TEXT that contains the word to complete.  We can use the
-        entire line in case we want to do some simple parsing.  Return the
-        array of matches, or NULL if there aren't any. */
-     char **
-     fileman_completion (text, start, end)
-          char *text;
-          int start, end;
-     {
-       char **matches;
-       char *command_generator ();
-     
-       matches = (char **)NULL;
-     
-       /* If this word is at the start of the line, then it is a command
-          to complete.  Otherwise it is the name of a file in the current
-          directory. */
-       if (start == 0)
-         matches = completion_matches (text, command_generator);
-     
-       return (matches);
-     }
-     
-     /* Generator function for command completion.  STATE lets us know whether
-        to start from scratch; without any state (i.e. STATE == 0), then we
-        start at the top of the list. */
-     char *
-     command_generator (text, state)
-          char *text;
-          int state;
-     {
-       static int list_index, len;
-       char *name;
-     
-       /* If this is a new word to complete, initialize now.  This includes
-          saving the length of TEXT for efficiency, and initializing the index
-          variable to 0. */
-       if (!state)
-         {
-           list_index = 0;
-           len = strlen (text);
-         }
-     
-       /* Return the next name which partially matches from the command list. */
-       while (name = commands[list_index].name)
-         {
-           list_index++;
-     
-           if (strncmp (name, text, len) == 0)
-             return (name);
-         }
-     
-       /* If no names matched, then return NULL. */
-       return ((char *)NULL);
-     }
-     
-     /* **************************************************************** */
-     /*                                                                  */
-     /*                       FileMan Commands                           */
-     /*                                                                  */
-     /* **************************************************************** */
-     
-     /* String to pass to system ().  This is for the LIST, VIEW and RENAME
-        commands. */
-     static char syscom[1024];
-     
-     /* List the file(s) named in arg. */
-     com_list (arg)
-          char *arg;
-     {
-       if (!arg)
-         arg = "*";
-     
-       sprintf (syscom, "ls -FClg %s", arg);
-       system (syscom);
-     }
-     
-     com_view (arg)
-          char *arg;
-     {
-       if (!valid_argument ("view", arg))
-         return;
-     
-       sprintf (syscom, "cat %s | more", arg);
-       system (syscom);
-     }
-     
-     com_rename (arg)
-          char *arg;
-     {
-       too_dangerous ("rename");
-     }
-     
-     com_stat (arg)
-          char *arg;
-     {
-       struct stat finfo;
-     
-       if (!valid_argument ("stat", arg))
-         return;
-     
-       if (stat (arg, &finfo) == -1)
-         {
-           perror (arg);
-           return;
-         }
-     
-       printf ("Statistics for `%s':\n", arg);
-     
-       printf ("%s has %d link%s, and is %d bytes in length.\n", arg,
-               finfo.st_nlink, (finfo.st_nlink == 1) ? "" : "s",  finfo.st_size);
-       printf ("      Created on: %s", ctime (&finfo.st_ctime));
-       printf ("  Last access at: %s", ctime (&finfo.st_atime));
-       printf ("Last modified at: %s", ctime (&finfo.st_mtime));
-     }
-     
-     com_delete (arg)
-          char *arg;
-     {
-       too_dangerous ("delete");
-     }
-     
-     /* Print out help for ARG, or for all of the commands if ARG is
-        not present. */
-     com_help (arg)
-          char *arg;
-     {
-       register int i;
-       int printed = 0;
-     
-       for (i = 0; commands[i].name; i++)
-         {
-           if (!*arg || (strcmp (arg, commands[i].name) == 0))
-             {
-               printf ("%s\t\t%s.\n", commands[i].name, commands[i].doc);
-               printed++;
-             }
-         }
-     
-       if (!printed)
-         {
-           printf ("No commands match `%s'.  Possibilties are:\n", arg);
-     
-           for (i = 0; commands[i].name; i++)
-             {
-               /* Print in six columns. */
-               if (printed == 6)
-                 {
-                   printed = 0;
-                   printf ("\n");
-                 }
-     
-               printf ("%s\t", commands[i].name);
-               printed++;
-             }
-     
-           if (printed)
-             printf ("\n");
-         }
-     }
-     
-     /* Change to the directory ARG. */
-     com_cd (arg)
-          char *arg;
-     {
-       if (chdir (arg) == -1)
-         perror (arg);
-     
-       com_pwd ("");
-     }
-     
-     /* Print out the current working directory. */
-     com_pwd (ignore)
-          char *ignore;
-     {
-       char dir[1024];
-     
-       (void) getwd (dir);
-     
-       printf ("Current directory is %s\n", dir);
-     }
-     
-     /* The user wishes to quit using this program.  Just set DONE non-zero. */
-     com_quit (arg)
-          char *arg;
-     {
-       done = 1;
-     }
-     
-     /* Function which tells you that you can't do this. */
-     too_dangerous (caller)
-          char *caller;
-     {
-       fprintf (stderr,
-                "%s: Too dangerous for me to distribute.  Write it yourself.\n",
-                caller);
-     }
-     
-     /* Return non-zero if ARG is a valid argument for CALLER, else print
-        an error message and return zero. */
-     int
-     valid_argument (caller, arg)
-          char *caller, *arg;
-     {
-       if (!arg || !*arg)
-         {
-           fprintf (stderr, "%s: Argument required.\n", caller);
-           return (0);
-         }
-     
-       return (1);
-     }
-
-\1f
-File: readline.info,  Node: Concept Index,  Next: Function and Variable Index,  Prev: Programming with GNU Readline,  Up: Top
-
-Concept Index
-*************
-
-* Menu:
-
-* interaction, readline:                Readline Interaction.
-* readline, function:                   Default Behaviour.
-
-\1f
-File: readline.info,  Node: Function and Variable Index,  Prev: Concept Index,  Up: Top
-
-Function and Variable Index
-***************************
-
-* Menu:
-
-* Function *rl_attempted_completion_function: Completion Variables.
-* Function *rl_completion_entry_function: Completion Variables.
-* Function *rl_completion_entry_function: How Completing Works.
-* Function *rl_ignore_some_completions_function: Completion Variables.
-* Keymap rl_copy_keymap:                Keymaps.
-* Keymap rl_make_bare_keymap:           Keymaps.
-* Keymap rl_make_keymap:                Keymaps.
-* abort (C-g):                          Miscellaneous Commands.
-* accept-line (Newline, Return):        Commands For History.
-* backward-char (C-b):                  Commands For Moving.
-* backward-delete-char (Rubout):        Commands For Text.
-* backward-kill-line ():                Commands For Killing.
-* backward-kill-word (M-DEL):           Commands For Killing.
-* backward-word (M-b):                  Commands For Moving.
-* beginning-of-history (M-<):           Commands For History.
-* beginning-of-line (C-a):              Commands For Moving.
-* capitalize-word (M-c):                Commands For Text.
-* char **completion_matches:            Completion Functions.
-* char *filename_completion_function:   Completion Functions.
-* char *rl_basic_word_break_characters: Completion Variables.
-* char *rl_completer_word_break_characters: Completion Variables.
-* char *rl_line_buffer:                 Function Writing.
-* char *rl_special_prefixes:            Completion Variables.
-* char *username_completion_function:   Completion Functions.
-* clear-screen (C-l):                   Commands For Moving.
-* complete (TAB):                       Commands For Completion.
-* delete-char (C-d):                    Commands For Text.
-* digit-argument (M-0, M-1, ... M--):   Numeric Arguments.
-* do-uppercase-version (M-a, M-b, ...): Miscellaneous Commands.
-* downcase-word (M-l):                  Commands For Text.
-* editing-mode:                         Readline Init Syntax.
-* end-of-history (M->):                 Commands For History.
-* end-of-line (C-e):                    Commands For Moving.
-* forward-char (C-f):                   Commands For Moving.
-* forward-search-history (C-s):         Commands For History.
-* forward-word (M-f):                   Commands For Moving.
-* horizontal-scroll-mode:               Readline Init Syntax.
-* int rl_bind_key:                      Binding Keys.
-* int rl_bind_key_in_map:               Binding Keys.
-* int rl_completion_query_items:        Completion Variables.
-* int rl_end:                           Function Writing.
-* int rl_filename_completion_desired:   Completion Variables.
-* int rl_ignore_completion_duplicates:  Completion Variables.
-* int rl_point:                         Function Writing.
-* int rl_unbind_key:                    Binding Keys.
-* int rl_unbind_key_in_map:             Binding Keys.
-* kill-line (C-k):                      Commands For Killing.
-* kill-word (M-d):                      Commands For Killing.
-* mark-modified-lines:                  Readline Init Syntax.
-* next-history (C-n):                   Commands For History.
-* possible-completions (M-?):           Commands For Completion.
-* prefer-visible-bell:                  Readline Init Syntax.
-* prefix-meta (ESC):                    Miscellaneous Commands.
-* previous-history (C-p):               Commands For History.
-* quoted-insert (C-q, C-v):             Commands For Text.
-* re-read-init-file (C-x C-r):          Miscellaneous Commands.
-* readline ():                          Default Behaviour.
-* reverse-search-history (C-r):         Commands For History.
-* revert-line (M-r):                    Miscellaneous Commands.
-* rl_add_defun:                         Function Naming.
-* rl_begin_undo_group:                  Allowing Undoing.
-* rl_bind_key ():                       Default Behaviour.
-* rl_complete:                          How Completing Works.
-* rl_complete:                          Completion Functions.
-* rl_complete_internal:                 Completion Functions.
-* rl_end_undo_group:                    Allowing Undoing.
-* rl_generic_bind:                      Binding Keys.
-* rl_modifying:                         Allowing Undoing.
-* rl_possible_completions:              Completion Functions.
-* self-insert (a, b, A, 1, !, ...):     Commands For Text.
-* tab-insert (M-TAB):                   Commands For Text.
-* transpose-chars (C-t):                Commands For Text.
-* transpose-words (M-t):                Commands For Text.
-* undo (C-_):                           Miscellaneous Commands.
-* universal-argument ():                Numeric Arguments.
-* unix-line-discard (C-u):              Commands For Killing.
-* unix-word-rubout (C-w):               Commands For Killing.
-* upcase-word (M-u):                    Commands For Text.
-* yank (C-y):                           Commands For Killing.
-* yank-pop (M-y):                       Commands For Killing.
-
-
-\1f
-Tag Table:
-Node: Top\7f998
-Node: Command Line Editing\7f1611
-Node: Introduction and Notation\7f2034
-Node: Readline Interaction\7f3056
-Node: Readline Bare Essentials\7f4195
-Node: Readline Movement Commands\7f5703
-Node: Readline Killing Commands\7f6594
-Node: Readline Arguments\7f8438
-Node: Readline Init File\7f9390
-Node: Readline Init Syntax\7f10218
-Node: Commands For Moving\7f14208
-Node: Commands For History\7f14838
-Node: Commands For Text\7f15913
-Node: Commands For Killing\7f17581
-Node: Numeric Arguments\7f18708
-Node: Commands For Completion\7f19152
-Node: Miscellaneous Commands\7f19876
-Node: Readline Vi Mode\7f20718
-Node: Programming with GNU Readline\7f22328
-Node: Default Behaviour\7f23033
-Node: Custom Functions\7f26258
-Node: The Function Type\7f27057
-Node: Function Naming\7f27690
-Node: Keymaps\7f28942
-Node: Binding Keys\7f29857
-Node: Function Writing\7f31158
-Node: Allowing Undoing\7f32599
-Node: Custom Completers\7f36101
-Node: How Completing Works\7f36849
-Node: Completion Functions\7f39664
-Node: Completion Variables\7f42000
-Node: A Short Completion Example\7f44772
-Node: Concept Index\7f56398
-Node: Function and Variable Index\7f56687
-\1f
-End Tag Table
diff --git a/readline/history.texi b/readline/history.texi
deleted file mode 100755 (executable)
index 5fd9125..0000000
+++ /dev/null
@@ -1,202 +0,0 @@
-\input texinfo.tex
-@setfilename history.info
-
-@ifinfo
-@format
-START-INFO-DIR-ENTRY
-* History: (history).          The GNU History library.
-END-INFO-DIR-ENTRY
-@end format
-@end ifinfo
-
-@ifinfo
-This file documents the GNU History library.
-
-Copyright (C) 1988 Free Software Foundation, Inc.
-Authored by Brian Fox.
-
-Permission is granted to make and distribute verbatim copies of this manual
-provided the copyright notice and this permission notice are preserved on
-all copies.
-
-@ignore
-Permission is granted to process this file through Tex and print the
-results, provided the printed document carries copying permission notice
-identical to this one except for the removal of this paragraph (this
-paragraph not being relevant to the printed manual).
-@end ignore
-
-Permission is granted to copy and distribute modified versions of this
-manual under the conditions for verbatim copying, provided also that the
-GNU Copyright statement is available to the distributee, and provided that
-the entire resulting derived work is distributed under the terms of a
-permission notice identical to this one.
-
-Permission is granted to copy and distribute translations of this manual
-into another language, under the above conditions for modified versions.
-@end ifinfo
-
-@node Top, Introduction, , (DIR)
-
-This document describes the GNU History library, a programming tool that
-provides a consistent user interface for recalling lines of previously
-typed input.
-
-@menu
-* Introduction::       What is the GNU History library for?
-* Interactive Use::    What it feels like using History as a user.
-* Programming::                How to use History in your programs.
-@end menu
-
-@node Introduction, Interactive Use, Top, Top
-@unnumbered Introduction
-
-Many programs read input from the user a line at a time.  The GNU history
-library is able to keep track of those lines, associate arbitrary data with
-each line, and utilize information from previous lines in making up new
-ones.
-
-The programmer using the History library has available to him functions for
-remembering lines on a history stack, associating arbitrary data with a
-line, removing lines from the stack, searching through the stack for a
-line containing an arbitrary text string, and referencing any line on the
-stack directly.  In addition, a history @dfn{expansion} function is
-available which provides for a consistent user interface across many
-different programs.
-
-The end-user using programs written with the History library has the
-benifit of a consistent user interface, with a set of well-known commands
-for manipulating the text of previous lines and using that text in new
-commands.  The basic history manipulation commands are similar to the
-history substitution used by Csh.
-
-If the programmer desires, he can use the Readline library, which includes
-history manipulation by default, and has the added advantage of Emacs style
-command line editing.
-
-@node Interactive Use, Programming, Introduction, Top
-@chapter Interactive Use
-
-@section History Expansion
-@cindex expansion
-
-The History library provides a history expansion feature that is similar to
-the history expansion in Csh.  The following text describes what syntax
-features are available.
-
-History expansion takes place in two parts.  The first is to determine
-which line from the previous history should be used during substitution.
-The second is to select portions of that line for inclusion into the
-current one.  The line selected from the previous history is called the
-@dfn{event}, and the portions of that line that are acted upon are called
-@dfn{words}.  The line is broken into words in the same fashion that the
-Bash shell does, so that several English (or Unix) words surrounded by
-quotes are considered as one word.
-
-@menu
-* Event Designators::  How to specify which history line to use.
-* Word Designators::   Specifying which words are of interest.
-* Modifiers::          Modifying the results of susbstitution.
-@end menu
-
-@node Event Designators, Word Designators, , Interactive Use
-@subsection Event Designators
-@cindex event designators
-
-An event designator is a reference to a command line entry in the history
-list.
-
-@table @var
-
-@item !
-Start a history subsititution, except when followed by a @key{SPC},
-@key{TAB}, @key{RET}, @key{=} or @key{(}.
-
-@item !!
-Refer to the previous command.  This is a synonym for @code{!-1}.
-
-@item !n
-Refer to command line @var{n}.
-
-@item !-n
-Refer to the current command line minus @var{n}.
-
-@item !string
-Refer to the most recent command starting with @var{string}.
-
-@item !?string[?]
-Refer to the most recent command containing @var{string}.
-
-@end table
-
-@node Word Designators, Modifiers, Event Designators, Interactive Use
-@subsection Word Designators
-
-A @key{:} separates the event specification from the word designator.  It
-can be omitted if the word designator begins with a @key{^}, @key{$},
-@key{*} or @key{%}.  Words are numbered from the beginning of the line,
-with the first word being denoted by a 0 (zero).
-
-@table @asis
-
-@item @var{0} (zero)
-The zero'th word.  For many applications, this is the command word.
-
-@item n
-The @var{n}'th word.
-
-@item @var{^}
-The first argument.  that is, word 1.
-
-@item @var{$}
-The last argument.
-
-@item @var{%}
-The word matched by the most recent @code{?string?} search.
-
-@item @var{x}-@var{y}
-A range of words; @code{-@var{y}} is equivalent to @code{0-@var{y}}.
-
-@item @var{*}
-All of the words, excepting the zero'th.  This is a synonym for @samp{1-$}.
-It is not an error to use @samp{*} if there is just one word in the event.
-The empty string is returned in that case.
-
-@end table
-
-@node Modifiers, , Word Designators, Interactive Use
-@subsection Modifiers
-
-After the optional word designator, you can add a sequence of one or more
-of the following modifiers, each preceded by a @key{:}.
-
-@table @code
-
-@item #
-The entire command line typed so far.  This means the current command,
-not the previous command, so it really isn't a word designator, and doesn't
-belong in this section.
-
-@item h
-Remove a trailing pathname component, leaving only the head.
-
-@item r
-Remove a trailing suffix of the form ".xxx", leaving the basename (root).
-
-@item e
-Remove all but the suffix (end).
-
-@item t
-Remove all leading  pathname  components (before the last slash), leaving
-the tail.
-
-@item p
-Print the new command but do not execute it.  This takes effect
-immediately, so it should be the last specifier on the line.
-
-@end table
-
-@node Programming, , Interactive Use, Top
-@chapter Programming
-
-@bye
diff --git a/readline/history.texinfo b/readline/history.texinfo
deleted file mode 100755 (executable)
index 1e619e1..0000000
+++ /dev/null
@@ -1,194 +0,0 @@
-\input texinfo.tex
-@setfilename history.info
-
-@ifinfo
-This file documents the GNU History library.
-
-Copyright (C) 1988 Free Software Foundation, Inc.
-Authored by Brian Fox.
-
-Permission is granted to make and distribute verbatim copies of this manual
-provided the copyright notice and this permission notice are preserved on
-all copies.
-
-@ignore
-Permission is granted to process this file through Tex and print the
-results, provided the printed document carries copying permission notice
-identical to this one except for the removal of this paragraph (this
-paragraph not being relevant to the printed manual).
-@end ignore
-
-Permission is granted to copy and distribute modified versions of this
-manual under the conditions for verbatim copying, provided also that the
-GNU Copyright statement is available to the distributee, and provided that
-the entire resulting derived work is distributed under the terms of a
-permission notice identical to this one.
-
-Permission is granted to copy and distribute translations of this manual
-into another language, under the above conditions for modified versions.
-@end ifinfo
-
-@node Top, Introduction, , (DIR)
-
-This document describes the GNU History library, a programming tool that
-provides a consistent user interface for recalling lines of previously
-typed input.
-
-@menu
-* Introduction::       What is the GNU History library for?
-* Interactive Use::    What it feels like using History as a user.
-* Programming::                How to use History in your programs.
-@end menu
-
-@node Introduction, Interactive Use, , Top
-@unnumbered Introduction
-
-Many programs read input from the user a line at a time.  The GNU history
-library is able to keep track of those lines, associate arbitrary data with
-each line, and utilize information from previous lines in making up new
-ones.
-
-The programmer using the History library has available to him functions for
-remembering lines on a history stack, associating arbitrary data with a
-line, removing lines from the stack, searching through the stack for a
-line containing an arbitrary text string, and referencing any line on the
-stack directly.  In addition, a history @dfn{expansion} function is
-available which provides for a consistent user interface across many
-different programs.
-
-The end-user using programs written with the History library has the
-benifit of a consistent user interface, with a set of well-known commands
-for manipulating the text of previous lines and using that text in new
-commands.  The basic history manipulation commands are similar to the
-history substitution used by Csh.
-
-If the programmer desires, he can use the Readline library, which includes
-history manipulation by default, and has the added advantage of Emacs style
-command line editing.
-
-@node Interactive Use, Programming, Introduction, Top
-@chapter Interactive Use
-
-@section History Expansion
-@cindex expansion
-
-The History library provides a history expansion feature that is similar to
-the history expansion in Csh.  The following text describes what syntax
-features are available.
-
-History expansion takes place in two parts.  The first is to determine
-which line from the previous history should be used during substitution.
-The second is to select portions of that line for inclusion into the
-current one.  The line selected from the previous history is called the
-@dfn{event}, and the portions of that line that are acted upon are called
-@dfn{words}.  The line is broken into words in the same fashion that the
-Bash shell does, so that several English (or Unix) words surrounded by
-quotes are considered as one word.
-
-@menu
-* Event Designators::  How to specify which history line to use.
-* Word Designators::   Specifying which words are of interest.
-* Modifiers::          Modifying the results of susbstitution.
-@end menu
-
-@node Event Designators, Word Designators, , Interactive Use
-@subsection Event Designators
-@cindex event designators
-
-An event designator is a reference to a command line entry in the history
-list.
-
-@table @var
-
-@item !
-Start a history subsititution, except when followed by a @key{SPC},
-@key{TAB}, @key{RET}, @key{=} or @key{(}.
-
-@item !!
-Refer to the previous command.  This is a synonym for @code{!-1}.
-
-@item !n
-Refer to command line @var{n}.
-
-@item !-n
-Refer to the current command line minus @var{n}.
-
-@item !string
-Refer to the most recent command starting with @var{string}.
-
-@item !?string[?]
-Refer to the most recent command containing @var{string}.
-
-@end table
-
-@node Word Designators, Modifiers, Event Designators, Interactive Use
-@subsection Word Designators
-
-A @key{:} separates the event specification from the word designator.  It
-can be omitted if the word designator begins with a @key{^}, @key{$},
-@key{*} or @key{%}.  Words are numbered from the beginning of the line,
-with the first word being denoted by a 0 (zero).
-
-@table @asis
-
-@item @var{0} (zero)
-The zero'th word.  For many applications, this is the command word.
-
-@item n
-The @var{n}'th word.
-
-@item @var{^}
-The first argument.  that is, word 1.
-
-@item @var{$}
-The last argument.
-
-@item @var{%}
-The word matched by the most recent @code{?string?} search.
-
-@item @var{x}-@var{y}
-A range of words; @code{-@var{y}} is equivalent to @code{0-@var{y}}.
-
-@item @var{*}
-All of the words, excepting the zero'th.  This is a synonym for @samp{1-$}.
-It is not an error to use @samp{*} if there is just one word in the event.
-The empty string is returned in that case.
-
-@end table
-
-@node Modifiers, , Word Designators, Interactive Use
-@subsection Modifiers
-
-After the optional word designator, you can add a sequence of one or more
-of the following modifiers, each preceded by a @key{:}.
-
-@table @code
-
-@item #
-The entire command line typed so far.  This means the current command,
-not the previous command, so it really isn't a word designator, and doesn't
-belong in this section.
-
-@item h
-Remove a trailing pathname component, leaving only the head.
-
-@item r
-Remove a trailing suffix of the form ".xxx", leaving the basename (root).
-
-@item e
-Remove all but the suffix (end).
-
-@item t
-Remove all leading  pathname  components (before the last slash), leaving
-the tail.
-
-@item p
-Print the new command but do not execute it.  This takes effect
-immediately, so it should be the last specifier on the line.
-
-@end table
-
-@node Programming, , Interactive Use, Top
-@chapter Programming
-
-@bye
diff --git a/readline/inc-hist.texi b/readline/inc-hist.texi
deleted file mode 100755 (executable)
index 9bbb575..0000000
+++ /dev/null
@@ -1,188 +0,0 @@
-@ifinfo
-This file documents the GNU History library.
-
-Copyright (C) 1988 Free Software Foundation, Inc.
-Authored by Brian Fox.
-
-Permission is granted to make and distribute verbatim copies of this manual
-provided the copyright notice and this permission notice are preserved on
-all copies.
-@end ifinfo
-
-@ignore
-Permission is granted to process this file through Tex and print the
-results, provided the printed document carries copying permission notice
-identical to this one except for the removal of this paragraph (this
-paragraph not being relevant to the printed manual).
-
-Permission is granted to copy and distribute modified versions of this
-manual under the conditions for verbatim copying, provided also that the
-GNU Copyright statement is available to the distributee, and provided that
-the entire resulting derived work is distributed under the terms of a
-permission notice identical to this one.
-
-Permission is granted to copy and distribute translations of this manual
-into another language, under the above conditions for modified versions.
-@end ignore
-
-@node History Top,,,
-@appendix Command Line History
-@ifinfo
-This file is meant to be an inclusion in the documentation of programs
-that use the history library features.  There is also a standalone
-document, entitled @file{history.texinfo}.
-@end ifinfo
-
-This Appendix describes the GNU History library, a programming tool that
-provides a consistent user interface for recalling lines of previously
-typed input.
-
-@menu
-* Introduction to History::    What is the GNU History library for?
-* History Interaction::                What it feels like using History as a user.
-@end menu
-
-@node Introduction to History, History Interaction, History Top, Top
-@appendixsec Introduction to History
-
-Many programs read input from the user a line at a time.  The GNU history
-library is able to keep track of those lines, associate arbitrary data with
-each line, and utilize information from previous lines in making up new
-ones.
-
-The programmer using the History library has available to him functions
-for remembering lines on a history stack, associating arbitrary data
-with a line, removing lines from the stack, searching through the stack
-for a line containing an arbitrary text string, and referencing any line
-on the stack directly.  In addition, a history @dfn{expansion} function
-is available which provides for a consistent user interface across many
-different programs.
-
-When you use programs written with the History library, you have the
-benefit of a consistent user interface, with a set of well-known
-commands for manipulating the text of previous lines and using that text
-in new commands.  The basic history manipulation commands are similar to
-the history substitution used by Csh.
-
-GNU programs often also use the Readline library, which includes history
-manipulation by default, and has the added advantage of Emacs style
-command line editing.
-
-@node History Interaction, , Introduction to History, Top
-@appendixsec History Interaction
-@cindex expansion
-
-The History library provides a history expansion feature that is similar
-to the history expansion in Csh.  The following text describes what
-syntax features are available.
-
-History expansion takes place in two parts.  The first is to determine
-which line from the previous history should be used during substitution.
-The second is to select portions of that line for inclusion into the
-current one.  The line selected from the previous history is called the
-@dfn{event}, and the portions of that line that are acted upon are
-called @dfn{words}.  The line is broken into words in the same fashion
-used by the Bash shell, so that several words surrounded by quotes are
-treated as if they were a single word.
-
-@menu
-* Event Designators::  How to specify which history line to use.  *
-Word Designators::     Specifying which words are of interest.  *
-Modifiers::            Modifying the results of susbstitution.
-@end menu
-
-@node Event Designators, Word Designators, , History Interaction
-@appendixsubsec Event Designators
-@cindex event designators
-
-An event designator is a reference to a command line entry in the
-history list.
-
-@table @asis
-
-@item @code{!}
-Start a history subsititution, except when followed by a space, tab, or
-the end of the line; or by @samp{=} or @samp{(}.
-
-@item @code{!!}
-Refer to the previous command.  This is a synonym for @code{!-1}.
-
-@item @code{!@var{n}}
-Refer to command line @var{n}.
-
-@item @code{!-@var{n}}
-Refer to the command line @var{n} lines back.
-
-@item @code{!@var{string}}
-Refer to the most recent command starting with @var{string}.
-
-@item @code{!?@var{string}}[@code{?}]
-Refer to the most recent command containing @var{string}.
-
-@end table
-
-@node Word Designators, Modifiers, Event Designators, History Interaction
-@appendixsubsec Word Designators
-
-A @samp{:} separates the event specification from the word designator.  It
-can be omitted if the word designator begins with a @samp{^}, @samp{$},
-@samp{*} or @samp{%}.  Words are numbered from the beginning of the line,
-with the first word being denoted by a 0 (zero).
-
-@table @code
-
-@item 0 (zero)
-The zero'th word.  For many applications, this is the command word.
-
-@item n
-The @var{n}'th word.
-
-@item ^
-The first argument.  that is, word 1.
-
-@item $
-The last argument.
-
-@item %
-The word matched by the most recent @code{?@var{string}?} search.
-
-@item @var{x}-@var{y}
-A range of words; @code{-@var{y}} abbreviates @code{0-@var{y}}.
-
-@item *
-All of the words, excepting the zero'th.  This is a synonym for @samp{1-$}.
-It is not an error to use @samp{*} if there is just one word in the event.
-The empty string is returned in that case.
-
-@end table
-
-@node Modifiers, , Word Designators, History Interaction
-@appendixsubsec Modifiers
-
-After the optional word designator, you can add a sequence of one or more
-of the following modifiers, each preceded by a @samp{:}.
-
-@table @code
-
-@item #
-The entire command line typed so far.  This means the current command,
-not the previous command, so it really isn't a word designator, and doesn't
-belong in this section.
-
-@item h
-Remove a trailing pathname component, leaving only the head.
-
-@item r
-Remove a trailing suffix of the form @samp{.@var{suffix}}, leaving the basename.
-
-@item e
-Remove all but the suffix.
-
-@item t
-Remove all leading  pathname  components, leaving the tail.
-
-@item p
-Print the new command but do not execute it.  This takes effect
-immediately, so it should be the last specifier on the line.
-
-@end table
diff --git a/readline/inc-history.texinfo b/readline/inc-history.texinfo
deleted file mode 100755 (executable)
index 9bbb575..0000000
+++ /dev/null
@@ -1,188 +0,0 @@
-@ifinfo
-This file documents the GNU History library.
-
-Copyright (C) 1988 Free Software Foundation, Inc.
-Authored by Brian Fox.
-
-Permission is granted to make and distribute verbatim copies of this manual
-provided the copyright notice and this permission notice are preserved on
-all copies.
-@end ifinfo
-
-@ignore
-Permission is granted to process this file through Tex and print the
-results, provided the printed document carries copying permission notice
-identical to this one except for the removal of this paragraph (this
-paragraph not being relevant to the printed manual).
-
-Permission is granted to copy and distribute modified versions of this
-manual under the conditions for verbatim copying, provided also that the
-GNU Copyright statement is available to the distributee, and provided that
-the entire resulting derived work is distributed under the terms of a
-permission notice identical to this one.
-
-Permission is granted to copy and distribute translations of this manual
-into another language, under the above conditions for modified versions.
-@end ignore
-
-@node History Top,,,
-@appendix Command Line History
-@ifinfo
-This file is meant to be an inclusion in the documentation of programs
-that use the history library features.  There is also a standalone
-document, entitled @file{history.texinfo}.
-@end ifinfo
-
-This Appendix describes the GNU History library, a programming tool that
-provides a consistent user interface for recalling lines of previously
-typed input.
-
-@menu
-* Introduction to History::    What is the GNU History library for?
-* History Interaction::                What it feels like using History as a user.
-@end menu
-
-@node Introduction to History, History Interaction, History Top, Top
-@appendixsec Introduction to History
-
-Many programs read input from the user a line at a time.  The GNU history
-library is able to keep track of those lines, associate arbitrary data with
-each line, and utilize information from previous lines in making up new
-ones.
-
-The programmer using the History library has available to him functions
-for remembering lines on a history stack, associating arbitrary data
-with a line, removing lines from the stack, searching through the stack
-for a line containing an arbitrary text string, and referencing any line
-on the stack directly.  In addition, a history @dfn{expansion} function
-is available which provides for a consistent user interface across many
-different programs.
-
-When you use programs written with the History library, you have the
-benefit of a consistent user interface, with a set of well-known
-commands for manipulating the text of previous lines and using that text
-in new commands.  The basic history manipulation commands are similar to
-the history substitution used by Csh.
-
-GNU programs often also use the Readline library, which includes history
-manipulation by default, and has the added advantage of Emacs style
-command line editing.
-
-@node History Interaction, , Introduction to History, Top
-@appendixsec History Interaction
-@cindex expansion
-
-The History library provides a history expansion feature that is similar
-to the history expansion in Csh.  The following text describes what
-syntax features are available.
-
-History expansion takes place in two parts.  The first is to determine
-which line from the previous history should be used during substitution.
-The second is to select portions of that line for inclusion into the
-current one.  The line selected from the previous history is called the
-@dfn{event}, and the portions of that line that are acted upon are
-called @dfn{words}.  The line is broken into words in the same fashion
-used by the Bash shell, so that several words surrounded by quotes are
-treated as if they were a single word.
-
-@menu
-* Event Designators::  How to specify which history line to use.  *
-Word Designators::     Specifying which words are of interest.  *
-Modifiers::            Modifying the results of susbstitution.
-@end menu
-
-@node Event Designators, Word Designators, , History Interaction
-@appendixsubsec Event Designators
-@cindex event designators
-
-An event designator is a reference to a command line entry in the
-history list.
-
-@table @asis
-
-@item @code{!}
-Start a history subsititution, except when followed by a space, tab, or
-the end of the line; or by @samp{=} or @samp{(}.
-
-@item @code{!!}
-Refer to the previous command.  This is a synonym for @code{!-1}.
-
-@item @code{!@var{n}}
-Refer to command line @var{n}.
-
-@item @code{!-@var{n}}
-Refer to the command line @var{n} lines back.
-
-@item @code{!@var{string}}
-Refer to the most recent command starting with @var{string}.
-
-@item @code{!?@var{string}}[@code{?}]
-Refer to the most recent command containing @var{string}.
-
-@end table
-
-@node Word Designators, Modifiers, Event Designators, History Interaction
-@appendixsubsec Word Designators
-
-A @samp{:} separates the event specification from the word designator.  It
-can be omitted if the word designator begins with a @samp{^}, @samp{$},
-@samp{*} or @samp{%}.  Words are numbered from the beginning of the line,
-with the first word being denoted by a 0 (zero).
-
-@table @code
-
-@item 0 (zero)
-The zero'th word.  For many applications, this is the command word.
-
-@item n
-The @var{n}'th word.
-
-@item ^
-The first argument.  that is, word 1.
-
-@item $
-The last argument.
-
-@item %
-The word matched by the most recent @code{?@var{string}?} search.
-
-@item @var{x}-@var{y}
-A range of words; @code{-@var{y}} abbreviates @code{0-@var{y}}.
-
-@item *
-All of the words, excepting the zero'th.  This is a synonym for @samp{1-$}.
-It is not an error to use @samp{*} if there is just one word in the event.
-The empty string is returned in that case.
-
-@end table
-
-@node Modifiers, , Word Designators, History Interaction
-@appendixsubsec Modifiers
-
-After the optional word designator, you can add a sequence of one or more
-of the following modifiers, each preceded by a @samp{:}.
-
-@table @code
-
-@item #
-The entire command line typed so far.  This means the current command,
-not the previous command, so it really isn't a word designator, and doesn't
-belong in this section.
-
-@item h
-Remove a trailing pathname component, leaving only the head.
-
-@item r
-Remove a trailing suffix of the form @samp{.@var{suffix}}, leaving the basename.
-
-@item e
-Remove all but the suffix.
-
-@item t
-Remove all leading  pathname  components, leaving the tail.
-
-@item p
-Print the new command but do not execute it.  This takes effect
-immediately, so it should be the last specifier on the line.
-
-@end table
diff --git a/readline/inc-read.texi b/readline/inc-read.texi
deleted file mode 100755 (executable)
index 3a46aaa..0000000
+++ /dev/null
@@ -1,490 +0,0 @@
-@ignore
-
-This file documents the end user interface to the GNU command line
-editing feautres.  It is to be an appendix to manuals for programs which
-use these features.  There is a document entitled "readline.texinfo"
-which contains both end-user and programmer documentation for the GNU
-Readline Library.
-
-Copyright (C) 1988, 1991 Free Software Foundation, Inc.
-
-Written by Brian Fox.
-
-Permission is granted to process this file through Tex and print the
-results, provided the printed document carries copying permission notice
-identical to this one except for the removal of this paragraph (this
-paragraph not being relevant to the printed manual).
-
-Permission is granted to make and distribute verbatim copies of this manual
-provided the copyright notice and this permission notice are preserved on
-all copies.
-
-Permission is granted to copy and distribute modified versions of this
-manual under the conditions for verbatim copying, provided also that the
-GNU Copyright statement is available to the distributee, and provided that
-the entire resulting derived work is distributed under the terms of a
-permission notice identical to this one.
-
-Permission is granted to copy and distribute translations of this manual
-into another language, under the above conditions for modified versions.
-@end ignore
-
-@node Command Line Editing, , , Top
-@appendix Command Line Editing
-
-This appendix describes GNU's command line editing interface.
-Often during an interactive session you will type in a long line of
-text, only to notice that the first word on the line is misspelled.  The
-Readline library gives you a set of commands for manipulating the text
-as you type it in, allowing you to just fix your typo, and not forcing
-you to retype the majority of the line.  Using these editing commands,
-you move the cursor to the place that needs correction, and delete or
-insert the text of the corrections.  Then, when you are satisfied with
-the line, you simply press @key{RETURN}.  You do not have to be at the
-end of the line to press @key{RETURN}; the entire line will be accepted
-in any case.
-
-@menu
-* Conventions::                        Notation used in this appendix.
-* Readline Interaction::       How to use Readline
-* Readline Init File::         Customizing Readline for your own use
-@end menu
-
-@node Conventions, Readline Interaction, Command Line Editing, Command Line Editing
-@appendixsec Conventions on Notation
-
-In this Appendix, the following notation is used to describe
-keystrokes.
-
-The text @kbd{C-k} is read as `Control-K' and describes the character
-produced when the Control key is depressed and the @key{k} key is struck.
-
-The text @kbd{M-k} is read as `Meta-K' and describes the character
-produced when the meta key (if you have one) is depressed, and the
-@key{k} key is struck.  If you do not have a meta key, it is equivalent
-to type @key{ESC} @i{first}, and then type @key{k}.  Either process is
-known as @dfn{metafying} the @key{k} key.
-
-The text @kbd{M-C-k} is read as `Meta-Control-k' and describes the
-character produced by @dfn{metafying} @kbd{C-k}.
-
-In addition, several keys have their own names.  Specifically,
-@key{DEL}, @key{ESC}, @key{LFD}, @key{SPC}, @key{RET}, and @key{TAB} all
-stand for themselves when seen in this text, or in an init file
-(@pxref{Readline Init File}, for more info).
-
-@node Readline Interaction, Readline Init File, Conventions, Command Line Editing
-@appendixsec Readline Interaction
-@cindex interaction, readline
-
-@menu
-* Readline Bare Essentials::   The least you need to know about Readline.
-* Readline Movement Commands:: Moving about the input line.
-* Readline Killing Commands::  How to delete text, and how to get it back!
-* Readline Arguments::         Giving numeric arguments to commands.
-@end menu
-
-@node Readline Bare Essentials, Readline Movement Commands, Readline Interaction, Readline Interaction
-@appendixsubsec Bare Essentials
-
-In order to enter characters into the line, simply type them.  The typed
-character appears where the cursor was, and then the cursor moves one
-space to the right.  If you mistype a character, you can use @key{DEL} to
-back up, and delete the mistyped character.
-
-Sometimes you may miss typing a character that you wanted to type, and
-not notice your error until you have typed several other characters.  In
-that case, you can type @kbd{C-b} to move the cursor to the left, and then
-correct your mistake.  Aftwerwards, you can move the cursor to the right
-with @kbd{C-f}.
-
-When you add text in the middle of a line, you will notice that characters
-to the right of the cursor get `pushed over' to make room for the text
-that you have inserted.  Likewise, when you delete text behind the cursor,
-characters to the right of the cursor get `pulled back' to fill in the
-blank space created by the removal of the text.  A list of the basic bare
-essentials for editing the text of an input line follows.
-
-@table @asis
-@item @kbd{C-b}
-Move back one character.
-@item @kbd{C-f}
-Move forward one character.
-@item @key{DEL}
-Delete the character to the left of the cursor.
-@item @kbd{C-d}
-Delete the character underneath the cursor.
-@item @var{c}
-Insert an ordinary printing character @var{c} into the line at the cursor.
-@item @kbd{C-_}
-Undo the last thing that you did.  You can undo all the way back to an
-empty line.
-@end table
-
-@node Readline Movement Commands, Readline Killing Commands, Readline Bare Essentials, Readline Interaction
-@appendixsubsec Movement Commands
-
-
-The above table describes the most basic possible keystrokes that you need
-in order to do editing of the input line.  For your convenience, many
-other commands have been added in addition to @kbd{C-b}, @kbd{C-f},
-@kbd{C-d}, and @key{DEL}.  Here are some commands for moving more rapidly
-about the line.
-
-@table @kbd
-@item C-a
-Move to the start of the line.
-@item C-e
-Move to the end of the line.
-@item M-f
-Move forward a word.
-@item M-b
-Move backward a word.
-@item C-l
-Clear the screen, reprinting the current line at the top.
-@end table
-
-Notice how @kbd{C-f} moves forward a character, while @kbd{M-f} moves
-forward a word.  It is a loose convention that control keystrokes
-operate on characters while meta keystrokes operate on words.
-
-@node Readline Killing Commands, Readline Arguments, Readline Movement Commands, Readline Interaction
-@appendixsubsec Killing Commands
-
-@dfn{Killing} text means to delete the text from the line, but to save
-it away for later use, usually by @dfn{yanking} it back into the line.
-If the description for a command says that it `kills' text, then you can
-be sure that you can get the text back in a different (or the same)
-place later.
-
-Here is the list of commands for killing text.
-
-@table @kbd
-@item C-k
-Kill the text from the current cursor position to the end of the line.
-
-@item M-d
-Kill from the cursor to the end of the current word, or if between
-words, to the end of the next word.
-
-@item M-@key{DEL}
-Kill from the cursor the start ofthe previous word, or if between words, to the start of the previous word.
-
-@item C-w
-Kill from the cursor to the previous whitespace.  This is different than
-@kbd{M-@key{DEL}} because the word boundaries differ.
-
-@end table
-
-And, here is how to @dfn{yank} the text back into the line.  Yanking
-is
-
-@table @kbd
-@item C-y
-Yank the most recently killed text back into the buffer at the cursor.
-
-@item M-y
-Rotate the kill-ring, and yank the new top.  You can only do this if
-the prior command is @kbd{C-y} or @kbd{M-y}.
-@end table
-
-When you use a kill command, the text is saved in a @dfn{kill-ring}.
-Any number of consecutive kills save all of the killed text together, so
-that when you yank it back, you get it in one clean sweep.  The kill
-ring is not line specific; the text that you killed on a previously
-typed line is available to be yanked back later, when you are typing
-another line.
-
-@node Readline Arguments, , Readline Killing Commands, Readline Interaction
-@appendixsubsec Arguments
-
-You can pass numeric arguments to Readline commands.  Sometimes the
-argument acts as a repeat count, other times it is the @i{sign} of the
-argument that is significant.  If you pass a negative argument to a
-command which normally acts in a forward direction, that command will
-act in a backward direction.  For example, to kill text back to the
-start of the line, you might type @kbd{M--} @kbd{C-k}.
-
-The general way to pass numeric arguments to a command is to type meta
-digits before the command.  If the first `digit' you type is a minus
-sign (@kbd{-}), then the sign of the argument will be negative.  Once
-you have typed one meta digit to get the argument started, you can type
-the remainder of the digits, and then the command.  For example, to give
-the @kbd{C-d} command an argument of 10, you could type @kbd{M-1 0 C-d}.
-
-
-@node Readline Init File, , Readline Interaction, Command Line Editing
-@appendixsec Readline Init File
-
-Although the Readline library comes with a set of Emacs-like
-keybindings, it is possible that you would like to use a different set
-of keybindings.  You can customize programs that use Readline by putting
-commands in an @dfn{init} file in your home directory.  The name of this
-file is @file{~/.inputrc}.
-
-When a program which uses the Readline library starts up, it reads the file
-@file{~/.inputrc}, and sets the keybindings.
-
-@menu
-* Readline Init Syntax::       Syntax for the commands in @file{~/.inputrc}.
-* Readline Vi Mode::           Switching to @code{vi} mode in Readline.
-@end menu
-
-@node Readline Init Syntax, Readline Vi Mode, Readline Init File, Readline Init File
-@appendixsubsec Readline Init Syntax
-
-You can start up with a vi-like editing mode by placing
-
-@example
-@code{set editing-mode vi}
-@end example
-
-@noindent
-in your @file{~/.inputrc} file.
-
-You can have Readline use a single line for display, scrolling the input
-between the two edges of the screen by placing
-
-@example
-@code{set horizontal-scroll-mode On}
-@end example
-
-@noindent
-in your @file{~/.inputrc} file.
-
-The syntax for controlling keybindings in the @file{~/.inputrc} file is
-simple.  First you have to know the @i{name} of the command that you
-want to change.  The following pages contain tables of the command name, the
-default keybinding, and a short description of what the command does.
-
-Once you know the name of the command, simply place the name of the key
-you wish to bind the command to, a colon, and then the name of the
-command on a line in the @file{~/.inputrc} file.  Here is an example:
-
-@example
-# This is a comment line.
-Meta-Rubout:   backward-kill-word
-Control-u:     universal-argument
-@end example
-
-@menu
-* Commands For Moving::                Moving about the line.
-* Commands For History::       Getting at previous lines.
-* Commands For Text::          Commands for changing text.
-* Commands For Killing::       Commands for killing and yanking.
-* Numeric Arguments::          Specifying numeric arguments, repeat counts.
-* Commands For Completion::    Getting Readline to do the typing for you.
-* Miscellaneous Commands::     Other miscillaneous commands.
-@end menu
-
-@node Commands For Moving, Commands For History, Readline Init Syntax, Readline Init Syntax
-@appendixsubsubsec Moving
-@table @code
-@item beginning-of-line (C-a)
-Move to the start of the current line.
-
-@item end-of-line (C-e)
-Move to the end of the line.
-
-@item forward-char (C-f)
-Move forward a character.
-
-@item backward-char (C-b)
-Move back a character.
-
-@item forward-word (M-f)
-Move forward to the end of the next word.
-
-@item backward-word (M-b)
-Move back to the start of this, or the previous, word.
-
-@item clear-screen (C-l)
-Clear the screen leaving the current line at the top of the screen.
-
-@end table
-
-@node Commands For History, Commands For Text, Commands For Moving, Readline Init Syntax
-@appendixsubsubsec Using the History
-
-@table @code
-@item accept-line (Newline, Return)
-Accept the line regardless of where the cursor is.  If this line is
-non-empty, add it to the history list.  If this line was a history
-line, then restore the history line to its original state.
-
-@item previous-history (C-p)
-Move `up' through the history list.
-
-@item next-history (C-n)
-Move `down' through the history list.
-
-@item beginning-of-history (M-<)
-Move to the first line in the history.
-
-@item end-of-history (M->)
-Move to the end of the input history, i.e., the line you are entering!
-
-@item reverse-search-history (C-r)
-Search backward starting at the current line and moving `up' through
-the history as necessary.  This is an incremental search.
-
-@item forward-search-history (C-s)
-Search forward starting at the current line and moving `down' through
-the the history as neccessary.
-
-@end table
-
-@node Commands For Text, Commands For Killing, Commands For History, Readline Init Syntax
-@appendixsubsubsec Changing Text
-
-@table @code
-@item delete-char (C-d)
-Delete the character under the cursor.  If the cursor is at the
-beginning of the line, and there are no characters in the line, and
-the last character typed was not C-d, then return EOF.
-
-@item backward-delete-char (Rubout)
-Delete the character behind the cursor.  A numeric arg says to kill
-the characters instead of deleting them.
-
-@item quoted-insert (C-q, C-v)
-Add the next character that you type to the line verbatim.  This is
-how to insert things like C-q for example.
-
-@item tab-insert (M-TAB)
-Insert a tab character.
-
-@item self-insert (a, b, A, 1, !, ...)
-Insert an ordinary printing character into the line.
-
-@item transpose-chars (C-t)
-Drag the character before point forward over the character at point.
-Point moves forward as well.  If point is at the end of the line, then
-transpose the two characters before point.  Negative args don't work.
-
-@item transpose-words (M-t)
-Drag the word behind the cursor past the word in front of the cursor
-moving the cursor over that word as well.
-
-@item upcase-word (M-u)
-Uppercase the current (or following) word.  With a negative argument,
-do the previous word, but do not move point.
-
-@item downcase-word (M-l)
-Lowercase the current (or following) word.  With a negative argument,
-do the previous word, but do not move point.
-
-@item capitalize-word (M-c)
-Uppercase the current (or following) word.  With a negative argument,
-do the previous word, but do not move point.
-
-@end table
-
-@node Commands For Killing, Numeric Arguments, Commands For Text, Readline Init Syntax
-@appendixsubsubsec Killing And Yanking
-
-@table @code
-
-@item kill-line (C-k)
-Kill the text from the current cursor position to the end of the line.
-
-@item backward-kill-line ()
-Kill backward to the beginning of the line.  This is normally unbound.
-
-@item kill-word (M-d)
-Kill from the cursor to the end of the current word, or if between
-words, to the end of the next word.
-
-@item backward-kill-word (M-DEL)
-Kill the word behind the cursor.
-
-@item unix-line-discard (C-u)
-Kill the entire line.  This is similar to the use of the Unix kill
-character (often also @key{C-u}), save that here the killed text can be
-retrieved later (since it goes on the kill-ring).
-
-@item unix-word-rubout (C-w)
-Kill the current word, like the Unix word erase character.  The killed
-text goes on the kill-ring.  This is different than
-@code{backward-kill-word} because the word boundaries differ.
-
-@item yank (C-y)
-Yank the top of the kill ring into the buffer at point.
-
-@item yank-pop (M-y)
-Rotate the kill-ring, and yank the new top.  You can only do this if
-the prior command is @code{yank} or @code{yank-pop}.
-@end table
-
-@node Numeric Arguments, Commands For Completion, Commands For Killing, Readline Init Syntax
-@appendixsubsubsec Numeric Arguments
-@table @code
-
-@item digit-argument (M-0, M-1, ... M--)
-Add this digit to the argument already accumulating, or start a new
-argument.  @kbd{M--} starts a negative argument.
-
-@item universal-argument ()
-Do what @key{C-u} does in emacs.  By default, this is not bound to any keys.
-@end table
-
-
-@node Commands For Completion, Miscellaneous Commands, Numeric Arguments, Readline Init Syntax
-@appendixsubsubsec Letting Readline Type
-
-@table @code
-@item complete (TAB)
-Attempt to do completion on the text before point.  This is
-implementation defined.  Generally, if you are typing a filename
-argument, you can do filename completion; if you are typing a command,
-you can do command completion, if you are typing in a symbol to GDB, you
-can do symbol name completion, if you are typing in a variable to Bash,
-you can do variable name completion...
-
-@item possible-completions (M-?)
-List the possible completions of the text before point.
-@end table
-
-@node Miscellaneous Commands, , Commands For Completion, Readline Init Syntax
-@appendixsubsubsec Other Commands
-@table @code
-
-@item abort (@kbd{C-g})
-The line editing commands @code{reverse-search-history} (@kbd{C-r}) and
-@code{forward-search-history} (@kbd{C-s} go into a separate input mode;
-you can abort the search, and return to normal input mode, by using the
-@code{abort} (@kbd{C-g}) command.
-
-@item do-uppercase-version (@kbd{M-a}, @kbd{M-b}, @dots{})
-Run the command that is bound to your uppercase brother.
-
-@item prefix-meta (@key{ESC})
-Make the next character that you type be metafied.  This is for
-people without a meta key.  @kbd{@key{ESC}-f} is equivalent to @kbd{M-f}.
-
-@item undo (@kbd{C-_})
-Incremental undo, separately remembered for each line.
-
-@item revert-line (@kbd{M-r})
-Undo all changes made to this line.  This is like typing the `undo'
-command enough times to get back to the beginning.
-@end table
-
-@node Readline vi Mode, , Readline Init Syntax, Readline Init File
-@appendixsubsec Readline @code{vi} Mode
-
-While the Readline library does not have a full set of @code{vi} editing
-functions, it does contain enough to allow simple editing of the line.
-
-In order to switch interactively between Emacs and @code{vi} editing modes, use
-the command @kbd{M-C-j} (@code{toggle-editing-mode}).
-
-When you enter a line in @code{vi} mode, you are already in
-``insertion'' mode, as if you had typed an @kbd{i}.  Pressing @key{ESC}
-switches you into ``edit'' mode, where you can edit the text of the line
-with the standard @code{vi} movement keys, move to previous history
-lines with @kbd{k}, to following lines with @kbd{j}, and so forth.
-
-
-
-
diff --git a/readline/inc-readline.texinfo b/readline/inc-readline.texinfo
deleted file mode 100755 (executable)
index 52a0e33..0000000
+++ /dev/null
@@ -1,494 +0,0 @@
-@ignore
-
-This file documents the end user interface to the GNU command line
-editing feautres.  It is to be an appendix to manuals for programs which
-use these features.  There is a document entitled "readline.texinfo"
-which contains both end-user and programmer documentation for the GNU
-Readline Library.
-
-Copyright (C) 1988, 1991 Free Software Foundation, Inc.
-
-Written by Brian Fox.
-
-Permission is granted to process this file through Tex and print the
-results, provided the printed document carries copying permission notice
-identical to this one except for the removal of this paragraph (this
-paragraph not being relevant to the printed manual).
-
-Permission is granted to make and distribute verbatim copies of this manual
-provided the copyright notice and this permission notice are preserved on
-all copies.
-
-Permission is granted to copy and distribute modified versions of this
-manual under the conditions for verbatim copying, provided also that the
-GNU Copyright statement is available to the distributee, and provided that
-the entire resulting derived work is distributed under the terms of a
-permission notice identical to this one.
-
-Permission is granted to copy and distribute translations of this manual
-into another language, under the above conditions for modified versions.
-@end ignore
-
-@node Command Line Editing, , , Top
-@appendix Command Line Editing
-
-This appendix describes GNU's command line editing interface.
-Often during an interactive session you will type in a long line of
-text, only to notice that the first word on the line is misspelled.  The
-Readline library gives you a set of commands for manipulating the text
-as you type it in, allowing you to just fix your typo, and not forcing
-you to retype the majority of the line.  Using these editing commands,
-you move the cursor to the place that needs correction, and delete or
-insert the text of the corrections.  Then, when you are satisfied with
-the line, you simply press @key{RETURN}.  You do not have to be at the
-end of the line to press @key{RETURN}; the entire line will be accepted
-in any case.
-
-@menu
-* Conventions::                        Notation used in this appendix.
-* Basic Line Editing::         The minimum set of commands for editing a line.
-* Movement Commands::          Commands for moving the cursor about the line.
-* Cutting and Pasting::                Deletion and copying of text sections.
-* Transposition::              Exchanging two characters or words.
-* Completion::                 Expansion of a partially typed word into
-                                the full text.
-@end menu
-
-@node Conventions, Basic Line Editing, Command Line Editing, Command Line Editing
-@appendixsec Conventions on Notation
-
-In this Appendix, the following notation is used to describe
-keystrokes.
-
-The text @kbd{C-k} is read as `Control-K' and describes the character
-produced when the Control key is depressed and the @key{k} key is struck.
-
-The text @kbd{M-k} is read as `Meta-K' and describes the character
-produced when the meta key (if you have one) is depressed, and the
-@key{k} key is struck.  If you do not have a meta key, it is equivalent
-to type @key{ESC} @i{first}, and then type @key{k}.  Either process is
-known as @dfn{metafying} the @key{k} key.
-
-The text @kbd{M-C-k} is read as `Meta-Control-k' and describes the
-character produced by @dfn{metafying} @kbd{C-k}.
-
-In addition, several keys have their own names.  Specifically,
-@key{DEL}, @key{ESC}, @key{LFD}, @key{SPC}, @key{RET}, and @key{TAB} all
-stand for themselves when seen in this text, or in an init file
-(@pxref{Readline Init File}, for more info).
-
-@node Readline Interaction, Readline Init File, Readline Introduction, Readline Top
-@appendixsec Readline Interaction
-@cindex interaction, readline
-
-@menu
-* Readline Bare Essentials::   The least you need to know about Readline.
-* Readline Movement Commands:: Moving about the input line.
-* Readline Killing Commands::  How to delete text, and how to get it back!
-* Readline Arguments::         Giving numeric arguments to commands.
-@end menu
-
-@node Readline Bare Essentials, Readline Movement Commands, Readline Interaction, Readline Interaction
-@appendixsubsec Bare Essentials
-
-In order to enter characters into the line, simply type them.  The typed
-character appears where the cursor was, and then the cursor moves one
-space to the right.  If you mistype a character, you can use @key{DEL} to
-back up, and delete the mistyped character.
-
-Sometimes you may miss typing a character that you wanted to type, and
-not notice your error until you have typed several other characters.  In
-that case, you can type @kbd{C-b} to move the cursor to the left, and then
-correct your mistake.  Aftwerwards, you can move the cursor to the right
-with @kbd{C-f}.
-
-When you add text in the middle of a line, you will notice that characters
-to the right of the cursor get `pushed over' to make room for the text
-that you have inserted.  Likewise, when you delete text behind the cursor,
-characters to the right of the cursor get `pulled back' to fill in the
-blank space created by the removal of the text.  A list of the basic bare
-essentials for editing the text of an input line follows.
-
-@table @asis
-@item @kbd{C-b}
-Move back one character.
-@item @kbd{C-f}
-Move forward one character.
-@item @key{DEL}
-Delete the character to the left of the cursor.
-@item @kbd{C-d}
-Delete the character underneath the cursor.
-@item @var{c}
-Insert an ordinary printing character @var{c} into the line at the cursor.
-@item @kbd{C-_}
-Undo the last thing that you did.  You can undo all the way back to an
-empty line.
-@end table
-
-@node Readline Movement Commands, Readline Killing Commands, Readline Bare Essentials, Readline Interaction
-@appendixsubsec Movement Commands
-
-
-The above table describes the most basic possible keystrokes that you need
-in order to do editing of the input line.  For your convenience, many
-other commands have been added in addition to @kbd{C-b}, @kbd{C-f},
-@kbd{C-d}, and @key{DEL}.  Here are some commands for moving more rapidly
-about the line.
-
-@table @kbd
-@item C-a
-Move to the start of the line.
-@item C-e
-Move to the end of the line.
-@item M-f
-Move forward a word.
-@item M-b
-Move backward a word.
-@item C-l
-Clear the screen, reprinting the current line at the top.
-@end table
-
-Notice how @kbd{C-f} moves forward a character, while @kbd{M-f} moves
-forward a word.  It is a loose convention that control keystrokes
-operate on characters while meta keystrokes operate on words.
-
-@node Readline Killing Commands, Readline Arguments, Readline Movement Commands, Readline Interaction
-@appendixsubsec Killing Commands
-
-@dfn{Killing} text means to delete the text from the line, but to save
-it away for later use, usually by @dfn{yanking} it back into the line.
-If the description for a command says that it `kills' text, then you can
-be sure that you can get the text back in a different (or the same)
-place later.
-
-Here is the list of commands for killing text.
-
-@table @kbd
-@item C-k
-Kill the text from the current cursor position to the end of the line.
-
-@item M-d
-Kill from the cursor to the end of the current word, or if between
-words, to the end of the next word.
-
-@item M-@key{DEL}
-Kill from the cursor the start ofthe previous word, or if between words, to the start of the previous word.
-
-@item C-w
-Kill from the cursor to the previous whitespace.  This is different than
-@kbd{M-@key{DEL}} because the word boundaries differ.
-
-@end table
-
-And, here is how to @dfn{yank} the text back into the line.  Yanking
-is
-
-@table @kbd
-@item C-y
-Yank the most recently killed text back into the buffer at the cursor.
-
-@item M-y
-Rotate the kill-ring, and yank the new top.  You can only do this if
-the prior command is @kbd{C-y} or @kbd{M-y}.
-@end table
-
-When you use a kill command, the text is saved in a @dfn{kill-ring}.
-Any number of consecutive kills save all of the killed text together, so
-that when you yank it back, you get it in one clean sweep.  The kill
-ring is not line specific; the text that you killed on a previously
-typed line is available to be yanked back later, when you are typing
-another line.
-
-@node Readline Arguments, , Readline Killing Commands, Readline Interaction
-@appendixsubsec Arguments
-
-You can pass numeric arguments to Readline commands.  Sometimes the
-argument acts as a repeat count, other times it is the @i{sign} of the
-argument that is significant.  If you pass a negative argument to a
-command which normally acts in a forward direction, that command will
-act in a backward direction.  For example, to kill text back to the
-start of the line, you might type @kbd{M--} @kbd{C-k}.
-
-The general way to pass numeric arguments to a command is to type meta
-digits before the command.  If the first `digit' you type is a minus
-sign (@kbd{-}), then the sign of the argument will be negative.  Once
-you have typed one meta digit to get the argument started, you can type
-the remainder of the digits, and then the command.  For example, to give
-the @kbd{C-d} command an argument of 10, you could type @kbd{M-1 0 C-d}.
-
-
-@node Readline Init File, , Readline Interaction, Readline Top
-@appendixsec Readline Init File
-
-Although the Readline library comes with a set of Emacs-like
-keybindings, it is possible that you would like to use a different set
-of keybindings.  You can customize programs that use Readline by putting
-commands in an @dfn{init} file in your home directory.  The name of this
-file is @file{~/.inputrc}.
-
-When a program which uses the Readline library starts up, it reads the file
-@file{~/.inputrc}, and sets the keybindings.
-
-@menu
-* Readline Init Syntax::       Syntax for the commands in @file{~/.inputrc}.
-* Readline Vi Mode::           Switching to @code{vi} mode in Readline.
-@end menu
-
-@node Readline Init Syntax, Readline Vi Mode, Readline Init File, Readline Init File
-@appendixsubsec Readline Init Syntax
-
-You can start up with a vi-like editing mode by placing
-
-@example
-@code{set editing-mode vi}
-@end example
-
-@noindent
-in your @file{~/.inputrc} file.
-
-You can have Readline use a single line for display, scrolling the input
-between the two edges of the screen by placing
-
-@example
-@code{set horizontal-scroll-mode On}
-@end example
-
-@noindent
-in your @file{~/.inputrc} file.
-
-The syntax for controlling keybindings in the @file{~/.inputrc} file is
-simple.  First you have to know the @i{name} of the command that you
-want to change.  The following pages contain tables of the command name, the
-default keybinding, and a short description of what the command does.
-
-Once you know the name of the command, simply place the name of the key
-you wish to bind the command to, a colon, and then the name of the
-command on a line in the @file{~/.inputrc} file.  Here is an example:
-
-@example
-# This is a comment line.
-Meta-Rubout:   backward-kill-word
-Control-u:     universal-argument
-@end example
-
-@menu
-* Commands For Moving::                Moving about the line.
-* Commands For History::       Getting at previous lines.
-* Commands For Text::          Commands for changing text.
-* Commands For Killing::       Commands for killing and yanking.
-* Numeric Arguments::          Specifying numeric arguments, repeat counts.
-* Commands For Completion::    Getting Readline to do the typing for you.
-* Miscellaneous Commands::     Other miscillaneous commands.
-@end menu
-
-@node Commands For Moving, Commands For History, Readline Init Syntax, Readline Init Syntax
-@appendixsubsubsec Moving
-@table @code
-@item beginning-of-line (C-a)
-Move to the start of the current line.
-
-@item end-of-line (C-e)
-Move to the end of the line.
-
-@item forward-char (C-f)
-Move forward a character.
-
-@item backward-char (C-b)
-Move back a character.
-
-@item forward-word (M-f)
-Move forward to the end of the next word.
-
-@item backward-word (M-b)
-Move back to the start of this, or the previous, word.
-
-@item clear-screen (C-l)
-Clear the screen leaving the current line at the top of the screen.
-
-@end table
-
-@node Commands For History, Commands For Text, Commands For Moving, Readline Init Syntax
-@appendixsubsubsec Using the History
-
-@table @code
-@item accept-line (Newline, Return)
-Accept the line regardless of where the cursor is.  If this line is
-non-empty, add it to the history list.  If this line was a history
-line, then restore the history line to its original state.
-
-@item previous-history (C-p)
-Move `up' through the history list.
-
-@item next-history (C-n)
-Move `down' through the history list.
-
-@item beginning-of-history (M-<)
-Move to the first line in the history.
-
-@item end-of-history (M->)
-Move to the end of the input history, i.e., the line you are entering!
-
-@item reverse-search-history (C-r)
-Search backward starting at the current line and moving `up' through
-the history as necessary.  This is an incremental search.
-
-@item forward-search-history (C-s)
-Search forward starting at the current line and moving `down' through
-the the history as neccessary.
-
-@end table
-
-@node Commands For Text, Commands For Killing, Commands For History, Readline Init Syntax
-@appendixsubsubsec Changing Text
-
-@table @code
-@item delete-char (C-d)
-Delete the character under the cursor.  If the cursor is at the
-beginning of the line, and there are no characters in the line, and
-the last character typed was not C-d, then return EOF.
-
-@item backward-delete-char (Rubout)
-Delete the character behind the cursor.  A numeric arg says to kill
-the characters instead of deleting them.
-
-@item quoted-insert (C-q, C-v)
-Add the next character that you type to the line verbatim.  This is
-how to insert things like C-q for example.
-
-@item tab-insert (M-TAB)
-Insert a tab character.
-
-@item self-insert (a, b, A, 1, !, ...)
-Insert an ordinary printing character into the line.
-
-@item transpose-chars (C-t)
-Drag the character before point forward over the character at point.
-Point moves forward as well.  If point is at the end of the line, then
-transpose the two characters before point.  Negative args don't work.
-
-@item transpose-words (M-t)
-Drag the word behind the cursor past the word in front of the cursor
-moving the cursor over that word as well.
-
-@item upcase-word (M-u)
-Uppercase the current (or following) word.  With a negative argument,
-do the previous word, but do not move point.
-
-@item downcase-word (M-l)
-Lowercase the current (or following) word.  With a negative argument,
-do the previous word, but do not move point.
-
-@item capitalize-word (M-c)
-Uppercase the current (or following) word.  With a negative argument,
-do the previous word, but do not move point.
-
-@end table
-
-@node Commands For Killing, Numeric Arguments, Commands For Text, Readline Init Syntax
-@appendixsubsubsec Killing And Yanking
-
-@table @code
-
-@item kill-line (C-k)
-Kill the text from the current cursor position to the end of the line.
-
-@item backward-kill-line ()
-Kill backward to the beginning of the line.  This is normally unbound.
-
-@item kill-word (M-d)
-Kill from the cursor to the end of the current word, or if between
-words, to the end of the next word.
-
-@item backward-kill-word (M-DEL)
-Kill the word behind the cursor.
-
-@item unix-line-discard (C-u)
-Kill the entire line.  This is similar to the use of the Unix kill
-character (often also @key{C-u}), save that here the killed text can be
-retrieved later (since it goes on the kill-ring).
-
-@item unix-word-rubout (C-w)
-Kill the current word, like the Unix word erase character.  The killed
-text goes on the kill-ring.  This is different than
-@code{backward-kill-word} because the word boundaries differ.
-
-@item yank (C-y)
-Yank the top of the kill ring into the buffer at point.
-
-@item yank-pop (M-y)
-Rotate the kill-ring, and yank the new top.  You can only do this if
-the prior command is @code{yank} or @code{yank-pop}.
-@end table
-
-@node Numeric Arguments, Commands For Completion, Commands For Killing, Readline Init Syntax
-@appendixsubsubsec Numeric Arguments
-@table @code
-
-@item digit-argument (M-0, M-1, ... M--)
-Add this digit to the argument already accumulating, or start a new
-argument.  @kbd{M--} starts a negative argument.
-
-@item universal-argument ()
-Do what @key{C-u} does in emacs.  By default, this is not bound to any keys.
-@end table
-
-
-@node Commands For Completion, Miscellaneous Commands, Numeric Arguments, Readline Init Syntax
-@appendixsubsubsec Letting Readline Type
-
-@table @code
-@item complete (TAB)
-Attempt to do completion on the text before point.  This is
-implementation defined.  Generally, if you are typing a filename
-argument, you can do filename completion; if you are typing a command,
-you can do command completion, if you are typing in a symbol to GDB, you
-can do symbol name completion, if you are typing in a variable to Bash,
-you can do variable name completion...
-
-@item possible-completions (M-?)
-List the possible completions of the text before point.
-@end table
-
-@node Miscellaneous Commands, , Commands For Completion, Readline Init Syntax
-@appendixsubsubsec Other Commands
-@table @code
-
-@item abort (@kbd{C-g})
-The line editing commands @code{reverse-search-history} (@kbd{C-r}) and
-@code{forward-search-history} (@kbd{C-s} go into a separate input mode;
-you can abort the search, and return to normal input mode, by using the
-@code{abort} (@kbd{C-g}) command.
-
-@item do-uppercase-version (@kbd{M-a}, @kbd{M-b}, @dots)
-Run the command that is bound to your uppercase brother.
-
-@item prefix-meta (@key{ESC})
-Make the next character that you type be metafied.  This is for
-people without a meta key.  @kbd{@key{ESC}-f} is equivalent to @kbd{M-f}.
-
-@item undo (@kbd{C-_})
-Incremental undo, separately remembered for each line.
-
-@item revert-line (@kbd{M-r})
-Undo all changes made to this line.  This is like typing the `undo'
-command enough times to get back to the beginning.
-@end table
-
-@node Readline vi Mode, , Readline Init Syntax, Readline Init File
-@appendixsubsec Readline @code{vi} Mode
-
-While the Readline library does not have a full set of @code{vi} editing
-functions, it does contain enough to allow simple editing of the line.
-
-In order to switch interactively between Emacs and @code{vi} editing modes, use
-the command @kbd{M-C-j} (@code{toggle-editing-mode}).
-
-When you enter a line in @code{vi} mode, you are already in
-``insertion'' mode, as if you had typed an @kbd{i}.  Pressing @key{ESC}
-switches you into ``edit'' mode, where you can edit the text of the line
-with the standard @code{vi} movement keys, move to previous history
-lines with @kbd{k}, to following lines with @kbd{j}, and so forth.
-
-
-
-
diff --git a/readline/readline.texi b/readline/readline.texi
deleted file mode 100755 (executable)
index abb6351..0000000
+++ /dev/null
@@ -1,442 +0,0 @@
-\input texinfo    @c -*-texinfo-*-
-@comment %**start of header (This is for running Texinfo on a region.)
-@setfilename readline.info
-@settitle Line Editing Commands
-@comment %**end of header (This is for running Texinfo on a region.)
-@synindex fn vr
-
-@ifinfo
-@format
-START-INFO-DIR-ENTRY
-* Readline: (readline).                The GNU Readline Library.
-END-INFO-DIR-ENTRY
-@end format
-@end ifinfo
-
-@iftex
-@comment finalout
-@end iftex
-
-@ifinfo
-This document describes the GNU Readline Library, a utility for aiding
-in the consitency of user interface across discrete programs that need
-to provide a command line interface.
-
-Copyright (C) 1988 Free Software Foundation, Inc.
-
-Permission is granted to make and distribute verbatim copies of
-this manual provided the copyright notice and this permission notice
-pare preserved on all copies.
-
-@ignore
-Permission is granted to process this file through TeX and print the
-results, provided the printed document carries copying permission
-notice identical to this one except for the removal of this paragraph
-(this paragraph not being relevant to the printed manual).
-
-@end ignore
-Permission is granted to copy and distribute modified versions of this
-manual under the conditions for verbatim copying, provided that the entire
-resulting derived work is distributed under the terms of a permission
-notice identical to this one.
-
-Permission is granted to copy and distribute translations of this manual
-into another language, under the above conditions for modified versions,
-except that this permission notice may be stated in a translation approved
-by the Foundation.
-@end ifinfo
-
-@setchapternewpage odd
-@titlepage
-@sp 11
-@center @titlefont{GNU Readline Library}
-@sp 2
-@center by Brian Fox
-@sp 2
-@center Version 1.0
-@sp 2
-@center February 1989
-
-@comment   Include the Distribution inside the titlepage environment so
-@c that headings are turned off. 
-
-@page
-@vskip 0pt plus 1filll
-Copyright @copyright{} 1989 Free Software Foundation, Inc.
-
-@sp 2
-This document describes the GNU Readline Library, a utility for aiding
-in the consistency of user interface across discrete programs that need
-to provide a command line interface.
-@sp 2
-
-Published by the Free Software Foundation @*
-675 Massachusetts Avenue, @*
-Cambridge, MA 02139 USA
-
-Permission is granted to make and distribute verbatim copies of
-this manual provided the copyright notice and this permission notice
-are preserved on all copies.
-
-Permission is granted to copy and distribute modified versions of this
-manual under the conditions for verbatim copying, provided that the entire
-resulting derived work is distributed under the terms of a permission
-notice identical to this one.
-
-Permission is granted to copy and distribute translations of this manual
-into another language, under the above conditions for modified versions,
-except that this permission notice may be stated in a translation approved
-by the Foundation.
-
-@end titlepage
-
-@node Top, , ,(DIR)
-@chapter GNU Readline Library
-
-@ifinfo
-This document describes the GNU Readline Library, a utility for aiding
-in the consistency of user interface across discrete programs that need
-to provide a command line interface.
-@end ifinfo
-
-@menu
-* Command Line Editing::        GNU Readline User's Manual
-* Readline Technical::         GNU Readline Programmer's Manual
-@end menu
-@include inc-read.texi
-@node Readline Technical, , Top, Top
-@chapter Readline Programmer's Manual
-
-This manual describes the interface between the GNU Readline Library and
-user programs.  If you are a programmer, and you wish to include the
-features found in GNU Readline in your own programs, such as completion,
-line editing, and interactive history manipulation, this documentation
-is for you.
-
-@menu
-* Default Behaviour::  Using the default behaviour of Readline.
-* Custom Functions::   Adding your own functions to Readline.
-* Custom Completers::  Supplanting or supplementing Readline's
-                       completion functions.
-* Variable Index::     Index of externally tweakable variables.
-@end menu
-
-@node Default Behaviour, Custom Functions, Readline Technical, Readline Technical
-@section Default Behaviour
-
-Many programs provide a command line interface, such as @code{mail},
-@code{ftp}, and @code{sh}.  For such programs, the default behaviour of
-Readline is sufficient.  This section describes how to use Readline in
-the simplest way possible, perhaps to replace calls in your code to
-@code{gets ()}.
-
-@findex readline ()
-@cindex readline, function
-The function @code{readline} prints a prompt and then reads and returns
-a single line of text from the user.  The line which @code{readline ()}
-returns is allocated with @code{malloc ()}; you should @code{free ()}
-the line when you are done with it.  The declaration in ANSI C is
-
-@example
-@code{char *readline (char *@var{prompt});}
-@end example
-or, preferably,
-@example
-@code{#include <readline/readline.h>}
-@end example
-
-So, one might say
-@example
-@code{char *line = readline ("Enter a line: ");}
-@end example
-in order to read a line of text from the user.
-
-The line which is returned has the final newline removed, so only the
-text of the line remains.
-
-If readline encounters an EOF while reading the line, and the line is
-empty at that point, then @code{(char *)NULL} is returned.  Otherwise,
-the line is ended just as if a newline was typed.
-
-If you want the user to be able to get at the line later, (with
-@key{C-p} for example), you must call @code{add_history ()} to save the
-line away in a @dfn{history} list of such lines.
-
-@example
-@code{add_history (line)};
-@end example
-
-If you use @code{add_history ()}, you should also
-@code{#include <readline/history.h>}
-For full details on the GNU History Library, see the associated manual.
-
-It is polite to avoid saving empty lines on the history list, since
-no one has a burning need to reuse a blank line.  Here is a function
-which usefully replaces the standard @code{gets ()} library function:
-
-@example
-#include <readline/readline.h>
-#include <readline/history.h>
-
-/* A static variable for holding the line. */
-static char *my_gets_line = (char *)NULL;
-
-/* Read a string, and return a pointer to it.  Returns NULL on EOF. */
-char *
-my_gets ()
-@{
-  /* If the buffer has already been allocated, return the memory
-     to the free pool. */
-  if (my_gets_line != (char *)NULL)
-    free (my_gets_line);
-
-  /* Get a line from the user. */
-  my_gets_line = readline ("");
-
-  /* If the line has any text in it, save it on the history. */
-  if (my_get_line && *my_gets_line)
-    add_history (my_gets_line);
-
-  return (my_gets_line);
-@}
-@end example
-
-The above code gives the user the default behaviour of @key{TAB}
-completion: completion on file names.  If you do not want readline to
-complete on filenames, you can change the binding of the @key{TAB} key
-with @code{rl_bind_key ()}.
-
-@findex rl_bind_key ()
-
-@example
-@code{int rl_bind_key (int @var{key}, (int (*)())@var{function});}
-@end example
-
-@code{rl_bind_key ()} takes 2 arguments; @var{key} is the character that
-you want to bind, and @var{function} is the address of the function to
-run when @var{key} is pressed.  Binding @key{TAB} to @code{rl_insert ()}
-makes @key{TAB} just insert itself.
-
-@code{rl_bind_key ()} returns non-zero if @var{key} is not a valid
-ASCII character code (between 0 and 255).
-
-@example
-@code{rl_bind_key ('\t', rl_insert);}
-@end example
-
-@node Custom Functions, Custom Completers, Default Behaviour, Readline Technical
-@section Custom Functions
-
-Readline provides a great many functions for manipulating the text of
-the line.  But it isn't possible to anticipate the needs of all
-programs.  This section describes the various functions and variables
-defined in within the Readline library which allow a user program to add
-customized functionality to Readline.
-
-@menu
-* The Function Type::  C declarations to make code readable.
-* Function Naming::    How to give a function you write a name.
-* Keymaps::            Making keymaps.
-* Binding Keys::       Changing Keymaps.
-* Function Writing::   Variables and calling conventions.
-* Allowing Undoing::   How to make your functions undoable.
-@end menu
-
-@node The Function Type, Function Naming, Custom Functions, Custom Functions
-For the sake of readabilty, we declare a new type of object, called
-@dfn{Function}.  `Function' is a C language function which returns an
-@code{int}.  The type declaration for `Function' is:
-
-@code{typedef int Function ();}
-
-The reason for declaring this new type is to make it easier to discuss
-pointers to C functions.  Let us say we had a variable called @var{func}
-which was a pointer to a function.  Instead of the classic C declaration
-
-@code{int (*)()func;}
-
-we have
-
-@code{Function *func;}
-
-@node Function Naming, Keymaps, The Function Type, Custom Functions
-@subsection Naming a Function
-
-The user can dynamically change the bindings of keys while using
-Readline.  This is done by representing the function with a descriptive
-name.  The user is able to type the descriptive name when referring to
-the function.  Thus, in an init file, one might find
-
-@example
-Meta-Rubout:   backward-kill-word
-@end example
-
-This binds @key{Meta-Rubout} to the function @emph{descriptively} named
-@code{backward-kill-word}.  You, as a programmer, should bind the
-functions you write to descriptive names as well.  Here is how to do
-that.
-
-@defun rl_add_defun (char *name, Function *function, int key)
-Add @var{name} to the list of named functions.  Make @var{function} be
-the function that gets called.  If @var{key} is not -1, then bind it to
-@var{function} using @code{rl_bind_key ()}.
-@end defun
-
-Using this function alone is sufficient for most applications.  It is
-the recommended way to add a few functions to the default functions that
-Readline has built in already.  If you need to do more or different
-things than adding a function to Readline, you may need to use the
-underlying functions described below.
-
-@node Keymaps, Binding Keys, Function Naming, Custom Functions
-@subsection Selecting a Keymap
-
-Key bindings take place on a @dfn{keymap}.  The keymap is the
-association between the keys that the user types and the functions that
-get run.  You can make your own keymaps, copy existing keymaps, and tell
-Readline which keymap to use.
-
-@defun rl_make_bare_keymap ()
-Returns a new, empty keymap.  The space for the keymap is allocated with
-@code{malloc ()}; you should @code{free ()} it when you are done.
-@end defun
-
-@defun rl_copy_keymap (Keymap map)
-Return a new keymap which is a copy of @var{map}.
-@end defun
-
-@defun rl_make_keymap ()
-Return a new keymap with the printing characters bound to rl_insert,
-the lowercase Meta characters bound to run their equivalents, and
-the Meta digits bound to produce numeric arguments.
-@end defun
-
-@node Binding Keys, Function Writing, Keymaps, Custom Functions
-@subsection Binding Keys
-
-You associate keys with functions through the keymap.  Here are
-the functions for doing that.
-
-@defun rl_bind_key (int key, Function *function)
-Binds @var{key} to @var{function} in the currently selected keymap.
-Returns non-zero in the case of an invalid @var{key}.
-@end defun
-
-@defun rl_bind_key_in_map (int key, Function *function, Keymap map)
-Bind @var{key} to @var{function} in @var{map}.  Returns non-zero in the case
-of an invalid @var{key}.
-@end defun
-
-@defun rl_unbind_key (int key)
-Make @var{key} do nothing in the currently selected keymap.
-Returns non-zero in case of error.
-@end defun
-
-@defun rl_unbind_key_in_map (int key, Keymap map)
-Make @var{key} be bound to the null function in @var{map}.
-Returns non-zero in case of error.
-@end defun
-
-@node Function Writing, Allowing Undoing, Binding Keys, Custom Functions
-@subsection Writing a New Function
-
-In order to write new functions for Readline, you need to know the
-calling conventions for keyboard invoked functions, and the names of the
-variables that describe the current state of the line gathered so far.
-
-@defvar char *rl_line_buffer
-This is the line gathered so far.  You are welcome to modify the
-contents of this, but see Undoing, below.
-@end defvar
-
-@defvar int rl_point
-The offset of the current cursor position in @var{rl_line_buffer}.
-@end defvar
-
-@defvar int rl_end
-The number of characters present in @code{rl_line_buffer}.  When
-@code{rl_point} is at the end of the line, then @code{rl_point} and
-@code{rl_end} are equal.
-@end defvar
-
-The calling sequence for a command @code{foo} looks like
-
-@example
-@code{foo (count, key)}
-@end example
-
-where @var{count} is the numeric argument (or 1 if defaulted) and
-@var{key} is the key that invoked this function.
-
-It is completely up to the function as to what should be done with the
-numeric argument; some functions use it as a repeat count, other
-functions as a flag, and some choose to ignore it.  In general, if a
-function uses the numeric argument as a repeat count, it should be able
-to do something useful with a negative argument as well as a positive
-argument.  At the very least, it should be aware that it can be passed a
-negative argument.
-
-@node Allowing Undoing, , Function Writing, Custom Functions
-@subsection Allowing Undoing
-
-Supporting the undo command is a painless thing to do, and makes your
-function much more useful to the end user.  It is certainly easy to try
-something if you know you can undo it.  I could use an undo function for
-the stock market.
-
-If your function simply inserts text once, or deletes text once, and it
-calls @code{rl_insert_text ()} or @code{rl_delete_text ()} to do it, then
-undoing is already done for you automatically, and you can safely skip
-this section.
-
-If you do multiple insertions or multiple deletions, or any combination
-of these operations, you will want to group them together into one
-operation.  This can be done with @code{rl_begin_undo_group ()} and 
-@code{rl_end_undo_group ()}.
-
-@defun rl_begin_undo_group ()
-Begins saving undo information in a group construct.  The undo
-information usually comes from calls to @code{rl_insert_text ()} and
-@code{rl_delete_text ()}, but they could be direct calls to
-@code{rl_add_undo ()}.
-@end defun
-
-@defun rl_end_undo_group ()
-Closes the current undo group started with @code{rl_begin_undo_group
-()}.  There should be exactly one call to @code{rl_end_undo_group ()}
-for every call to @code{rl_begin_undo_group ()}.
-@end defun
-
-Finally, if you neither insert nor delete text, but directly modify the
-existing text (e.g. change its case), you call @code{rl_modifying ()}
-once, just before you modify the text.  You must supply the indices of
-the text range that you are going to modify.
-
-@defun rl_modifying (int start, int end)
-Tell Readline to save the text between @var{start} and @var{end} as a
-single undo unit.  It is assumed that subsequent to this call you will
-modify that range of text in some way.
-@end defun
-
-@subsection An Example
-
-Let us say that we are actually going to put an example here.
-
-@node Custom Completers, Variable Index, Custom Functions, Readline Technical
-
-Typically, a program that reads commands from the user has a way of
-disambiguating between commands and data.  If your program is one of
-these, then it can provide completion for either commands, or data, or
-both commands and data.  The following sections describe how your
-program and Readline cooperate to provide this service to end users.
-
-@menu
-@end menu
-
-@node Variable Index, , Custom Completers, Readline Technical
-@appendix Variable Index
-@printindex vr
-@contents
-
-@bye
-
diff --git a/readline/readline.texinfo b/readline/readline.texinfo
deleted file mode 100755 (executable)
index 36fe7a9..0000000
+++ /dev/null
@@ -1,434 +0,0 @@
-\input texinfo    @c -*-texinfo-*-
-@comment %**start of header (This is for running Texinfo on a region.)
-@setfilename readline.info
-@settitle Line Editing Commands
-@comment %**end of header (This is for running Texinfo on a region.)
-@synindex fn vr
-
-@iftex
-@comment finalout
-@end iftex
-
-@ifinfo
-This document describes the GNU Readline Library, a utility for aiding
-in the consitency of user interface across discrete programs that need
-to provide a command line interface.
-
-Copyright (C) 1988 Free Software Foundation, Inc.
-
-Permission is granted to make and distribute verbatim copies of
-this manual provided the copyright notice and this permission notice
-pare preserved on all copies.
-
-@ignore
-Permission is granted to process this file through TeX and print the
-results, provided the printed document carries copying permission
-notice identical to this one except for the removal of this paragraph
-(this paragraph not being relevant to the printed manual).
-
-@end ignore
-Permission is granted to copy and distribute modified versions of this
-manual under the conditions for verbatim copying, provided that the entire
-resulting derived work is distributed under the terms of a permission
-notice identical to this one.
-
-Permission is granted to copy and distribute translations of this manual
-into another language, under the above conditions for modified versions,
-except that this permission notice may be stated in a translation approved
-by the Foundation.
-@end ifinfo
-
-@setchapternewpage odd
-@titlepage
-@sp 11
-@center @titlefont{GNU Readline Library}
-@sp 2
-@center by Brian Fox
-@sp 2
-@center Version 1.0
-@sp 2
-@center February 1989
-
-@comment   Include the Distribution inside the titlepage environment so
-@c that headings are turned off. 
-
-@page
-@vskip 0pt plus 1filll
-Copyright @copyright{} 1989 Free Software Foundation, Inc.
-
-@sp 2
-This document describes the GNU Readline Library, a utility for aiding
-in the consistency of user interface across discrete programs that need
-to provide a command line interface.
-@sp 2
-
-Published by the Free Software Foundation @*
-675 Massachusetts Avenue, @*
-Cambridge, MA 02139 USA
-
-Permission is granted to make and distribute verbatim copies of
-this manual provided the copyright notice and this permission notice
-are preserved on all copies.
-
-Permission is granted to copy and distribute modified versions of this
-manual under the conditions for verbatim copying, provided that the entire
-resulting derived work is distributed under the terms of a permission
-notice identical to this one.
-
-Permission is granted to copy and distribute translations of this manual
-into another language, under the above conditions for modified versions,
-except that this permission notice may be stated in a translation approved
-by the Foundation.
-
-@end titlepage
-
-@node Top, Readline Top, ,(DIR)
-@chapter GNU Readline Library
-
-@ifinfo
-This document describes the GNU Readline Library, a utility for aiding
-in the consistency of user interface across discrete programs that need
-to provide a command line interface.
-@end ifinfo
-
-@menu
-* Readline Top::       GNU Readline User's Manual
-* Readline Technical:: GNU Readline Programmer's Manual
-@end menu
-@include inc-readline.texinfo
-@node Readline Technical, , Top, Top
-@chapter Readline Programmer's Manual
-
-This manual describes the interface between the GNU Readline Library and
-user programs.  If you are a programmer, and you wish to include the
-features found in GNU Readline in your own programs, such as completion,
-line editing, and interactive history manipulation, this documentation
-is for you.
-
-@menu
-* Default Behaviour::  Using the default behaviour of Readline.
-* Custom Functions::   Adding your own functions to Readline.
-* Custom Completers::  Supplanting or supplementing Readline's
-                       completion functions.
-* Variable Index::     Index of externally tweakable variables.
-@end menu
-
-@node Default Behaviour, Custom Functions, Readline Technical, Readline Technical
-@section Default Behaviour
-
-Many programs provide a command line interface, such as @code{mail},
-@code{ftp}, and @code{sh}.  For such programs, the default behaviour of
-Readline is sufficient.  This section describes how to use Readline in
-the simplest way possible, perhaps to replace calls in your code to
-@code{gets ()}.
-
-@findex readline ()
-@cindex readline, function
-The function @code{readline} prints a prompt and then reads and returns
-a single line of text from the user.  The line which @code{readline ()}
-returns is allocated with @code{malloc ()}; you should @code{free ()}
-the line when you are done with it.  The declaration in ANSI C is
-
-@example
-@code{char *readline (char *@var{prompt});}
-@end example
-or, preferably,
-@example
-@code{#include <readline/readline.h>}
-@end example
-
-So, one might say
-@example
-@code{char *line = readline ("Enter a line: ");}
-@end example
-in order to read a line of text from the user.
-
-The line which is returned has the final newline removed, so only the
-text of the line remains.
-
-If readline encounters an EOF while reading the line, and the line is
-empty at that point, then @code{(char *)NULL} is returned.  Otherwise,
-the line is ended just as if a newline was typed.
-
-If you want the user to be able to get at the line later, (with
-@key{C-p} for example), you must call @code{add_history ()} to save the
-line away in a @dfn{history} list of such lines.
-
-@example
-@code{add_history (line)};
-@end example
-
-If you use @code{add_history ()}, you should also
-@code{#include <readline/history.h>}
-For full details on the GNU History Library, see the associated manual.
-
-It is polite to avoid saving empty lines on the history list, since
-no one has a burning need to reuse a blank line.  Here is a function
-which usefully replaces the standard @code{gets ()} library function:
-
-@example
-#include <readline/readline.h>
-#include <readline/history.h>
-
-/* A static variable for holding the line. */
-static char *my_gets_line = (char *)NULL;
-
-/* Read a string, and return a pointer to it.  Returns NULL on EOF. */
-char *
-my_gets ()
-@{
-  /* If the buffer has already been allocated, return the memory
-     to the free pool. */
-  if (my_gets_line != (char *)NULL)
-    free (my_gets_line);
-
-  /* Get a line from the user. */
-  my_gets_line = readline ("");
-
-  /* If the line has any text in it, save it on the history. */
-  if (my_get_line && *my_gets_line)
-    add_history (my_gets_line);
-
-  return (my_gets_line);
-@}
-@end example
-
-The above code gives the user the default behaviour of @key{TAB}
-completion: completion on file names.  If you do not want readline to
-complete on filenames, you can change the binding of the @key{TAB} key
-with @code{rl_bind_key ()}.
-
-@findex rl_bind_key ()
-
-@example
-@code{int rl_bind_key (int @var{key}, (int (*)())@var{function});}
-@end example
-
-@code{rl_bind_key ()} takes 2 arguments; @var{key} is the character that
-you want to bind, and @var{function} is the address of the function to
-run when @var{key} is pressed.  Binding @key{TAB} to @code{rl_insert ()}
-makes @key{TAB} just insert itself.
-
-@code{rl_bind_key ()} returns non-zero if @var{key} is not a valid
-ASCII character code (between 0 and 255).
-
-@example
-@code{rl_bind_key ('\t', rl_insert);}
-@end example
-
-@node Custom Functions, Custom Completers, Default Behaviour, Readline Technical
-@section Custom Functions
-
-Readline provides a great many functions for manipulating the text of
-the line.  But it isn't possible to anticipate the needs of all
-programs.  This section describes the various functions and variables
-defined in within the Readline library which allow a user program to add
-customized functionality to Readline.
-
-@menu
-* The Function Type::  C declarations to make code readable.
-* Function Naming::    How to give a function you write a name.
-* Keymaps::            Making keymaps.
-* Binding Keys::       Changing Keymaps.
-* Function Writing::   Variables and calling conventions.
-* Allowing Undoing::   How to make your functions undoable.
-@end menu
-
-@node The Function Type, Function Naming, Custom Functions, Custom Functions
-For the sake of readabilty, we declare a new type of object, called
-@dfn{Function}.  `Function' is a C language function which returns an
-@code{int}.  The type declaration for `Function' is:
-
-@code{typedef int Function ();}
-
-The reason for declaring this new type is to make it easier to discuss
-pointers to C functions.  Let us say we had a variable called @var{func}
-which was a pointer to a function.  Instead of the classic C declaration
-
-@code{int (*)()func;}
-
-we have
-
-@code{Function *func;}
-
-@node Function Naming, Keymaps, The Function Type, Custom Functions
-@subsection Naming a Function
-
-The user can dynamically change the bindings of keys while using
-Readline.  This is done by representing the function with a descriptive
-name.  The user is able to type the descriptive name when referring to
-the function.  Thus, in an init file, one might find
-
-@example
-Meta-Rubout:   backward-kill-word
-@end example
-
-This binds @key{Meta-Rubout} to the function @emph{descriptively} named
-@code{backward-kill-word}.  You, as a programmer, should bind the
-functions you write to descriptive names as well.  Here is how to do
-that.
-
-@defun rl_add_defun (char *name, Function *function, int key)
-Add @var{name} to the list of named functions.  Make @var{function} be
-the function that gets called.  If @var{key} is not -1, then bind it to
-@var{function} using @code{rl_bind_key ()}.
-@end defun
-
-Using this function alone is sufficient for most applications.  It is
-the recommended way to add a few functions to the default functions that
-Readline has built in already.  If you need to do more or different
-things than adding a function to Readline, you may need to use the
-underlying functions described below.
-
-@node Keymaps, Binding Keys, Function Naming, Custom Functions
-@subsection Selecting a Keymap
-
-Key bindings take place on a @dfn{keymap}.  The keymap is the
-association between the keys that the user types and the functions that
-get run.  You can make your own keymaps, copy existing keymaps, and tell
-Readline which keymap to use.
-
-@defun rl_make_bare_keymap ()
-Returns a new, empty keymap.  The space for the keymap is allocated with
-@code{malloc ()}; you should @code{free ()} it when you are done.
-@end defun
-
-@defun rl_copy_keymap (Keymap map)
-Return a new keymap which is a copy of @var{map}.
-@end defun
-
-@defun rl_make_keymap ()
-Return a new keymap with the printing characters bound to rl_insert,
-the lowercase Meta characters bound to run their equivalents, and
-the Meta digits bound to produce numeric arguments.
-@end defun
-
-@node Binding Keys, Function Writing, Keymaps, Custom Functions
-@subsection Binding Keys
-
-You associate keys with functions through the keymap.  Here are
-the functions for doing that.
-
-@defun rl_bind_key (int key, Function *function)
-Binds @var{key} to @var{function} in the currently selected keymap.
-Returns non-zero in the case of an invalid @var{key}.
-@end defun
-
-@defun rl_bind_key_in_map (int key, Function *function, Keymap map)
-Bind @var{key} to @var{function} in @var{map}.  Returns non-zero in the case
-of an invalid @var{key}.
-@end defun
-
-@defun rl_unbind_key (int key)
-Make @var{key} do nothing in the currently selected keymap.
-Returns non-zero in case of error.
-@end defun
-
-@defun rl_unbind_key_in_map (int key, Keymap map)
-Make @var{key} be bound to the null function in @var{map}.
-Returns non-zero in case of error.
-@end defun
-
-@node Function Writing, Allowing Undoing, Binding Keys, Custom Functions
-@subsection Writing a New Function
-
-In order to write new functions for Readline, you need to know the
-calling conventions for keyboard invoked functions, and the names of the
-variables that describe the current state of the line gathered so far.
-
-@defvar char *rl_line_buffer
-This is the line gathered so far.  You are welcome to modify the
-contents of this, but see Undoing, below.
-@end defvar
-
-@defvar int rl_point
-The offset of the current cursor position in @var{rl_line_buffer}.
-@end defvar
-
-@defvar int rl_end
-The number of characters present in @code{rl_line_buffer}.  When
-@code{rl_point} is at the end of the line, then @code{rl_point} and
-@code{rl_end} are equal.
-@end defvar
-
-The calling sequence for a command @code{foo} looks like
-
-@example
-@code{foo (count, key)}
-@end example
-
-where @var{count} is the numeric argument (or 1 if defaulted) and
-@var{key} is the key that invoked this function.
-
-It is completely up to the function as to what should be done with the
-numeric argument; some functions use it as a repeat count, other
-functions as a flag, and some choose to ignore it.  In general, if a
-function uses the numeric argument as a repeat count, it should be able
-to do something useful with a negative argument as well as a positive
-argument.  At the very least, it should be aware that it can be passed a
-negative argument.
-
-@node Allowing Undoing, , Function Writing, Custom Functions
-@subsection Allowing Undoing
-
-Supporting the undo command is a painless thing to do, and makes your
-function much more useful to the end user.  It is certainly easy to try
-something if you know you can undo it.  I could use an undo function for
-the stock market.
-
-If your function simply inserts text once, or deletes text once, and it
-calls @code{rl_insert_text ()} or @code{rl_delete_text ()} to do it, then
-undoing is already done for you automatically, and you can safely skip
-this section.
-
-If you do multiple insertions or multiple deletions, or any combination
-of these operations, you will want to group them together into one
-operation.  This can be done with @code{rl_begin_undo_group ()} and 
-@code{rl_end_undo_group ()}.
-
-@defun rl_begin_undo_group ()
-Begins saving undo information in a group construct.  The undo
-information usually comes from calls to @code{rl_insert_text ()} and
-@code{rl_delete_text ()}, but they could be direct calls to
-@code{rl_add_undo ()}.
-@end defun
-
-@defun rl_end_undo_group ()
-Closes the current undo group started with @code{rl_begin_undo_group
-()}.  There should be exactly one call to @code{rl_end_undo_group ()}
-for every call to @code{rl_begin_undo_group ()}.
-@end defun
-
-Finally, if you neither insert nor delete text, but directly modify the
-existing text (e.g. change its case), you call @code{rl_modifying ()}
-once, just before you modify the text.  You must supply the indices of
-the text range that you are going to modify.
-
-@defun rl_modifying (int start, int end)
-Tell Readline to save the text between @var{start} and @var{end} as a
-single undo unit.  It is assumed that subsequent to this call you will
-modify that range of text in some way.
-@end defun
-
-@subsection An Example
-
-Let us say that we are actually going to put an example here.
-
-@node Custom Completers, Variable Index, Custom Functions, Readline Technical
-
-Typically, a program that reads commands from the user has a way of
-disambiguating between commands and data.  If your program is one of
-these, then it can provide completion for either commands, or data, or
-both commands and data.  The following sections describe how your
-program and Readline cooperate to provide this service to end users.
-
-@menu
-@end menu
-
-@node Variable Index, , Custom Completers, Readline Technical
-@appendix Variable Index
-@printindex vr
-@contents
-
-@bye
-
diff --git a/readline/sysdep-newsos.h b/readline/sysdep-newsos.h
deleted file mode 100755 (executable)
index dbed762..0000000
+++ /dev/null
@@ -1,10 +0,0 @@
-/* System-dependent stuff, for Sony NEwS systems */
-
-#ifdef __GNUC__
-#define alloca __builtin_alloca
-#else
-extern char *alloca ();
-#endif
-
-#include <sys/dir.h>
-typedef struct direct dirent;
diff --git a/readline/sysdep-oldbsd.h b/readline/sysdep-oldbsd.h
deleted file mode 100755 (executable)
index 86b6d0d..0000000
+++ /dev/null
@@ -1,11 +0,0 @@
-/* System-dependent stuff, for Sony NEwS, Mach, and other systems 
-   in the "old BSD Unix" tradition.  */
-
-#ifdef __GNUC__
-#define alloca __builtin_alloca
-#else
-extern char *alloca ();
-#endif
-
-#include <sys/dir.h>
-typedef struct direct dirent;