#define PASID_NUMBER_SHIFT 8
#define PASID_NUMBER_MASK (0x1f << PASID_NUMBER_SHIFT)
/**
- * pci_max_pasid - Get maximum number of PASIDs supported by device
+ * pci_max_pasids - Get maximum number of PASIDs supported by device
* @pdev: PCI device structure
*
* Returns negative value when PASID capability is not present.
// SPDX-License-Identifier: GPL-2.0
-/**
+/*
* pci-j721e - PCIe controller driver for TI's J721E SoCs
*
* Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com
};
/**
- * ks_pcie_set_dbi_mode() - Set DBI mode to access overlaid BAR mask
- * registers
+ * ks_pcie_set_dbi_mode() - Set DBI mode to access overlaid BAR mask registers
+ * @ks_pcie: A pointer to the keystone_pcie structure which holds the KeyStone
+ * PCIe host controller driver information.
*
* Since modification of dbi_cs2 involves different clock domain, read the
* status back to ensure the transition is complete.
/**
* ks_pcie_clear_dbi_mode() - Disable DBI mode
+ * @ks_pcie: A pointer to the keystone_pcie structure which holds the KeyStone
+ * PCIe host controller driver information.
*
* Since modification of dbi_cs2 involves different clock domain, read the
* status back to ensure the transition is complete.
/**
* ks_pcie_v3_65_add_bus() - keystone add_bus post initialization
+ * @bus: A pointer to the PCI bus structure.
*
* This sets BAR0 to enable inbound access for MSI_IRQ register
*/
/**
* ks_pcie_link_up() - Check if link up
+ * @pci: A pointer to the dw_pcie structure which holds the DesignWare PCIe host
+ * controller driver information.
*/
static int ks_pcie_link_up(struct dw_pcie *pci)
{
/**
* ks_pcie_legacy_irq_handler() - Handle legacy interrupt
- * @irq: IRQ line for legacy interrupts
* @desc: Pointer to irq descriptor
*
* Traverse through pending legacy interrupts and invoke handler for each. Also
// SPDX-License-Identifier: GPL-2.0
-/**
+/*
* Endpoint Function Driver to implement Non-Transparent Bridge functionality
*
* Copyright (C) 2020 Texas Instruments
/**
* epf_ntb_peer_spad_bar_clear() - Clear Peer Scratchpad BAR
- * @ntb: NTB device that facilitates communication between HOST1 and HOST2
+ * @ntb_epc: EPC associated with one of the HOST which holds peer's outbound
+ * address.
*
*+-----------------+------->+------------------+ +-----------------+
*| BAR0 | | CONFIG REGION | | BAR0 |
/**
* epf_ntb_peer_spad_bar_set() - Set peer scratchpad BAR
* @ntb: NTB device that facilitates communication between HOST1 and HOST2
+ * @type: PRIMARY interface or SECONDARY interface
*
*+-----------------+------->+------------------+ +-----------------+
*| BAR0 | | CONFIG REGION | | BAR0 |
/**
* epf_ntb_config_sspad_bar_clear() - Clear Config + Self scratchpad BAR
- * @ntb: NTB device that facilitates communication between HOST1 and HOST2
+ * @ntb_epc: EPC associated with one of the HOST which holds peer's outbound
+ * address.
*
* +-----------------+------->+------------------+ +-----------------+
* | BAR0 | | CONFIG REGION | | BAR0 |
/**
* epf_ntb_config_sspad_bar_set() - Set Config + Self scratchpad BAR
- * @ntb: NTB device that facilitates communication between HOST1 and HOST2
+ * @ntb_epc: EPC associated with one of the HOST which holds peer's outbound
+ * address.
*
* +-----------------+------->+------------------+ +-----------------+
* | BAR0 | | CONFIG REGION | | BAR0 |
/**
* epf_ntb_alloc_peer_mem() - Allocate memory in peer's outbound address space
+ * @dev: The PCI device.
* @ntb_epc: EPC associated with one of the HOST whose BAR holds peer's outbound
* address
* @bar: BAR of @ntb_epc in for which memory has to be allocated (could be
* epf_ntb_init_epc_bar() - Identify BARs to be used for each of the NTB
* constructs (scratchpad region, doorbell, memorywindow)
* @ntb: NTB device that facilitates communication between HOST1 and HOST2
- * @type: PRIMARY interface or SECONDARY interface
*
* Wrapper to epf_ntb_init_epc_bar_interface() to identify the free BARs
* to be used for each of BAR_CONFIG, BAR_PEER_SPAD, BAR_DB_MW1, BAR_MW2,
/**
* epf_ntb_add_cfs() - Add configfs directory specific to NTB
* @epf: NTB endpoint function device
+ * @group: A pointer to the config_group structure referencing a group of
+ * config_items of a specific type that belong to a specific sub-system.
*
* Add configfs directory specific to NTB. This directory will hold
* NTB specific properties like db_count, spad_count, num_mws etc.,
// SPDX-License-Identifier: GPL-2.0
-/**
+/*
* Test driver to test endpoint functionality
*
* Copyright (C) 2017 Texas Instruments
* pci_epc_remove_epf() - remove PCI endpoint function from endpoint controller
* @epc: the EPC device from which the endpoint function should be removed
* @epf: the endpoint function to be removed
+ * @type: identifies if the EPC is connected to the primary or secondary
+ * interface of EPF
*
* Invoke to remove PCI endpoint function from the endpoint controller.
*/
}
/**
- * acpi_pcihp_check_ejectable - check if handle is ejectable ACPI PCI slot
+ * acpi_pci_check_ejectable - check if handle is ejectable ACPI PCI slot
* @pbus: the PCI bus of the PCI slot corresponding to 'handle'
* @handle: ACPI handle to check
*
EXPORT_SYMBOL_GPL(of_pci_parse_bus_range);
/**
- * This function will try to obtain the host bridge domain number by
- * finding a property called "linux,pci-domain" of the given device node.
+ * of_get_pci_domain_nr - Find the host bridge domain number
+ * of the given device node.
+ * @node: Device tree node with the domain information.
*
- * @node: device tree node with the domain information
+ * This function will try to obtain the host bridge domain number by finding
+ * a property called "linux,pci-domain" of the given device node.
+ *
+ * Return:
+ * * > 0 - On success, an associated domain number.
+ * * -EINVAL - The property "linux,pci-domain" does not exist.
+ * * -ENODATA - The linux,pci-domain" property does not have value.
+ * * -EOVERFLOW - Invalid "linux,pci-domain" property value.
*
* Returns the associated domain number from DT in the range [0-0xffff], or
* a negative value if the required property is not found.
#endif /* CONFIG_PCI */
/**
+ * of_pci_get_max_link_speed - Find the maximum link speed of the given device node.
+ * @node: Device tree node with the maximum link speed information.
+ *
* This function will try to find the limitation of link speed by finding
* a property called "max-link-speed" of the given device node.
*
- * @node: device tree node with the max link speed information
+ * Return:
+ * * > 0 - On success, a maximum link speed.
+ * * -EINVAL - Invalid "max-link-speed" property value, or failure to access
+ * the property of the device tree node.
*
* Returns the associated max link speed from DT, or a negative value if the
* required property is not found or is invalid.
};
/**
- * enable_ercr_checking - enable PCIe ECRC checking for a device
+ * enable_ecrc_checking - enable PCIe ECRC checking for a device
* @dev: the PCI device
*
* Returns 0 on success, or negative on failure.
}
/**
- * disable_ercr_checking - disables PCIe ECRC checking for a device
+ * disable_ecrc_checking - disables PCIe ECRC checking for a device
* @dev: the PCI device
*
* Returns 0 on success, or negative on failure.
};
/**
- * aer_service_init - register AER root service driver
+ * pcie_aer_init - register AER root service driver
*
* Invoked when AER root service driver is loaded.
*/
};
/**
- * pcie_pme_service_init - Register the PCIe PME service driver.
+ * pcie_pme_init - Register the PCIe PME service driver.
*/
int __init pcie_pme_init(void)
{
projects / platform / kernel / linux-starfive.git / commitdiff