NTB: Add parameters for Intel SNB B2B addresses

Add module parameters for the addresses to be used in B2B topology.

Signed-off-by: Allen Hubbe <Allen.Hubbe@emc.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>

diff --git a/Documentation/ntb.txt b/Documentation/ntb.txt
index 725ba1e..00a3f92 100644 (file)
--- a/Documentation/ntb.txt
+++ b/Documentation/ntb.txt
@@ -56,3 +56,13 @@ Module Parameters:
 * b2b\_mw\_share - If the peer ntb is to be accessed via a memory window, and if
        the memory window is large enough, still allow the client to use the
        second half of the memory window for address translation to the peer.
+* snb\_b2b\_usd\_bar2\_addr64 - If using B2B topology on Xeon hardware, use this
+       64 bit address on the bus between the NTB devices for the window at
+       BAR2, on the upstream side of the link.
+* snb\_b2b\_usd\_bar4\_addr64 - See *snb\_b2b\_bar2\_addr64*.
+* snb\_b2b\_usd\_bar4\_addr32 - See *snb\_b2b\_bar2\_addr64*.
+* snb\_b2b\_usd\_bar5\_addr32 - See *snb\_b2b\_bar2\_addr64*.
+* snb\_b2b\_dsd\_bar2\_addr64 - See *snb\_b2b\_bar2\_addr64*.
+* snb\_b2b\_dsd\_bar4\_addr64 - See *snb\_b2b\_bar2\_addr64*.
+* snb\_b2b\_dsd\_bar4\_addr32 - See *snb\_b2b\_bar2\_addr64*.
+* snb\_b2b\_dsd\_bar5\_addr32 - See *snb\_b2b\_bar2\_addr64*.

diff --git a/drivers/ntb/hw/intel/ntb_hw_intel.c b/drivers/ntb/hw/intel/ntb_hw_intel.c
index 4992222..c5ad7cb 100644 (file)
--- a/drivers/ntb/hw/intel/ntb_hw_intel.c
+++ b/drivers/ntb/hw/intel/ntb_hw_intel.c
@@ -72,20 +72,6 @@ MODULE_AUTHOR("Intel Corporation");
 #define bar0_off(base, bar) ((base) + ((bar) << 2))
 #define bar2_off(base, bar) bar0_off(base, (bar) - 2)
 
-static int b2b_mw_idx = -1;
-module_param(b2b_mw_idx, int, 0644);
-MODULE_PARM_DESC(b2b_mw_idx, "Use this mw idx to access the peer ntb.  A "
-                "value of zero or positive starts from first mw idx, and a "
-                "negative value starts from last mw idx.  Both sides MUST "
-                "set the same value here!");
-
-static unsigned int b2b_mw_share;
-module_param(b2b_mw_share, uint, 0644);
-MODULE_PARM_DESC(b2b_mw_share, "If the b2b mw is large enough, configure the "
-                "ntb so that the peer ntb only occupies the first half of "
-                "the mw, so the second half can still be used as a mw.  Both "
-                "sides MUST set the same value here!");
-
 static const struct intel_ntb_reg bwd_reg;
 static const struct intel_ntb_alt_reg bwd_pri_reg;
 static const struct intel_ntb_alt_reg bwd_sec_reg;
@@ -98,14 +84,67 @@ static const struct intel_ntb_alt_reg snb_sec_reg;
 static const struct intel_ntb_alt_reg snb_b2b_reg;
 static const struct intel_ntb_xlat_reg snb_pri_xlat;
 static const struct intel_ntb_xlat_reg snb_sec_xlat;
-static const struct intel_b2b_addr snb_b2b_usd_addr;
-static const struct intel_b2b_addr snb_b2b_dsd_addr;
-
+static struct intel_b2b_addr snb_b2b_usd_addr;
+static struct intel_b2b_addr snb_b2b_dsd_addr;
 static const struct ntb_dev_ops intel_ntb_ops;
 
 static const struct file_operations intel_ntb_debugfs_info;
 static struct dentry *debugfs_dir;
 
+static int b2b_mw_idx = -1;
+module_param(b2b_mw_idx, int, 0644);
+MODULE_PARM_DESC(b2b_mw_idx, "Use this mw idx to access the peer ntb.  A "
+                "value of zero or positive starts from first mw idx, and a "
+                "negative value starts from last mw idx.  Both sides MUST "
+                "set the same value here!");
+
+static unsigned int b2b_mw_share;
+module_param(b2b_mw_share, uint, 0644);
+MODULE_PARM_DESC(b2b_mw_share, "If the b2b mw is large enough, configure the "
+                "ntb so that the peer ntb only occupies the first half of "
+                "the mw, so the second half can still be used as a mw.  Both "
+                "sides MUST set the same value here!");
+
+module_param_named(snb_b2b_usd_bar2_addr64,
+                  snb_b2b_usd_addr.bar2_addr64, ullong, 0644);
+MODULE_PARM_DESC(snb_b2b_usd_bar2_addr64,
+                "SNB B2B USD BAR 2 64-bit address");
+
+module_param_named(snb_b2b_usd_bar4_addr64,
+                  snb_b2b_usd_addr.bar4_addr64, ullong, 0644);
+MODULE_PARM_DESC(snb_b2b_usd_bar2_addr64,
+                "SNB B2B USD BAR 4 64-bit address");
+
+module_param_named(snb_b2b_usd_bar4_addr32,
+                  snb_b2b_usd_addr.bar4_addr32, ullong, 0644);
+MODULE_PARM_DESC(snb_b2b_usd_bar2_addr64,
+                "SNB B2B USD split-BAR 4 32-bit address");
+
+module_param_named(snb_b2b_usd_bar5_addr32,
+                  snb_b2b_usd_addr.bar5_addr32, ullong, 0644);
+MODULE_PARM_DESC(snb_b2b_usd_bar2_addr64,
+                "SNB B2B USD split-BAR 5 32-bit address");
+
+module_param_named(snb_b2b_dsd_bar2_addr64,
+                  snb_b2b_dsd_addr.bar2_addr64, ullong, 0644);
+MODULE_PARM_DESC(snb_b2b_dsd_bar2_addr64,
+                "SNB B2B DSD BAR 2 64-bit address");
+
+module_param_named(snb_b2b_dsd_bar4_addr64,
+                  snb_b2b_dsd_addr.bar4_addr64, ullong, 0644);
+MODULE_PARM_DESC(snb_b2b_dsd_bar2_addr64,
+                "SNB B2B DSD BAR 4 64-bit address");
+
+module_param_named(snb_b2b_dsd_bar4_addr32,
+                  snb_b2b_dsd_addr.bar4_addr32, ullong, 0644);
+MODULE_PARM_DESC(snb_b2b_dsd_bar2_addr64,
+                "SNB B2B DSD split-BAR 4 32-bit address");
+
+module_param_named(snb_b2b_dsd_bar5_addr32,
+                  snb_b2b_dsd_addr.bar5_addr32, ullong, 0644);
+MODULE_PARM_DESC(snb_b2b_dsd_bar2_addr64,
+                "SNB B2B DSD split-BAR 5 32-bit address");
+
 #ifndef ioread64
 #ifdef readq
 #define ioread64 readq
@@ -2073,14 +2112,14 @@ static const struct intel_ntb_xlat_reg snb_sec_xlat = {
        .bar2_xlat              = SNB_SBAR23XLAT_OFFSET,
 };
 
-static const struct intel_b2b_addr snb_b2b_usd_addr = {
+static struct intel_b2b_addr snb_b2b_usd_addr = {
        .bar2_addr64            = SNB_B2B_BAR2_USD_ADDR64,
        .bar4_addr64            = SNB_B2B_BAR4_USD_ADDR64,
        .bar4_addr32            = SNB_B2B_BAR4_USD_ADDR32,
        .bar5_addr32            = SNB_B2B_BAR5_USD_ADDR32,
 };
 
-static const struct intel_b2b_addr snb_b2b_dsd_addr = {
+static struct intel_b2b_addr snb_b2b_dsd_addr = {
        .bar2_addr64            = SNB_B2B_BAR2_DSD_ADDR64,
        .bar4_addr64            = SNB_B2B_BAR4_DSD_ADDR64,
        .bar4_addr32            = SNB_B2B_BAR4_DSD_ADDR32,