arm64: dts: qcom: sc7280-crd: Add device tree files for CRD

CRD (Compute Reference Design) is a sc7280 based board, largely
derived from the existing IDP board design with some key deltas
1. has EC and H1 over SPI similar to IDP2
2. touchscreen and trackpad support
3. eDP display

We just add the barebones dts file here, subsequent patches will
add support for EC/H1 and other components.

Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Tested-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1638185497-26477-3-git-send-email-quic_rjendra@quicinc.com

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 5057241..7f26ec2 100644 (file)
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -84,6 +84,7 @@ dtb-$(CONFIG_ARCH_QCOM)       += sc7180-trogdor-r1-lte.dtb
 dtb-$(CONFIG_ARCH_QCOM)        += sc7280-herobrine.dtb
 dtb-$(CONFIG_ARCH_QCOM)        += sc7280-idp.dtb
 dtb-$(CONFIG_ARCH_QCOM)        += sc7280-idp2.dtb
+dtb-$(CONFIG_ARCH_QCOM)        += sc7280-crd.dtb
 dtb-$(CONFIG_ARCH_QCOM)        += sdm630-sony-xperia-ganges-kirin.dtb
 dtb-$(CONFIG_ARCH_QCOM)        += sdm630-sony-xperia-nile-discovery.dtb
 dtb-$(CONFIG_ARCH_QCOM)        += sdm630-sony-xperia-nile-pioneer.dtb

diff --git a/arch/arm64/boot/dts/qcom/sc7280-crd.dts b/arch/arm64/boot/dts/qcom/sc7280-crd.dts
new file mode 100644 (file)
index 0000000..2da6603
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7280-crd.dts
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * sc7280 CRD board device tree source
+ *
+ * Copyright (c) 2021 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "sc7280-idp.dtsi"
+
+/ {
+       model = "Qualcomm Technologies, Inc. sc7280 CRD platform";
+       compatible = "qcom,sc7280-crd", "google,hoglin", "qcom,sc7280";
+
+       aliases {
+               serial0 = &uart5;
+       };
+
+       chosen {
+               stdout-path = "serial0:115200n8";
+       };
+};
+
+&nvme_3v3_regulator {
+       gpio = <&tlmm 51 GPIO_ACTIVE_HIGH>;
+};
+
+&nvme_pwren {
+       pins = "gpio51";
+};