ARM: sun5i: a10s: r7 tv dongle: Convert to DT label based syntax
authorMaxime Ripard <maxime.ripard@free-electrons.com>
Fri, 30 Jan 2015 15:58:45 +0000 (16:58 +0100)
committerMaxime Ripard <maxime.ripard@free-electrons.com>
Mon, 27 Apr 2015 06:20:20 +0000 (08:20 +0200)
In order to lessen the amount of duplication of the DT tree, ease the
new and follow the trend that prefers to use label based references
when overriding DTSI nodes, convert the board to this syntax

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts

index 7deddfc..d42ce17 100644 (file)
        model = "R7 A10s hdmi tv-stick";
        compatible = "allwinner,r7-tv-dongle", "allwinner,sun5i-a10s";
 
-       soc@01c00000 {
-               mmc0: mmc@01c0f000 {
-                       pinctrl-names = "default";
-                       pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_r7>;
-                       vmmc-supply = <&reg_vcc3v3>;
-                       bus-width = <4>;
-                       cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
-                       cd-inverted;
-                       status = "okay";
-               };
-
-               mmc1: mmc@01c10000 {
-                       pinctrl-names = "default";
-                       pinctrl-0 = <&mmc1_pins_a>;
-                       vmmc-supply = <&reg_vcc3v3>;
-                       bus-width = <4>;
-                       non-removable;
-                       status = "okay";
-               };
-
-               usbphy: phy@01c13400 {
-                       usb1_vbus-supply = <&reg_usb1_vbus>;
-                       status = "okay";
-               };
-
-               ehci0: usb@01c14000 {
-                       status = "okay";
-               };
-
-               ohci0: usb@01c14400 {
-                       status = "okay";
-               };
-
-               pinctrl@01c20800 {
-                       mmc0_cd_pin_r7: mmc0_cd_pin@0 {
-                               allwinner,pins = "PG1";
-                               allwinner,function = "gpio_in";
-                               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-                               allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-                       };
-
-                       led_pins_r7: led_pins@0 {
-                               allwinner,pins = "PB2";
-                               allwinner,function = "gpio_out";
-                               allwinner,drive = <SUN4I_PINCTRL_20_MA>;
-                               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-                       };
-
-                       usb1_vbus_pin_r7: usb1_vbus_pin@0 {
-                               allwinner,pins = "PG13";
-                               allwinner,function = "gpio_out";
-                               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-                               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-                       };
-               };
-
-               uart0: serial@01c28000 {
-                       pinctrl-names = "default";
-                       pinctrl-0 = <&uart0_pins_a>;
-                       status = "okay";
-               };
-       };
-
        leds {
                compatible = "gpio-leds";
                pinctrl-names = "default";
                        default-state = "on";
                };
        };
+};
+
+&ehci0 {
+       status = "okay";
+};
+
+&mmc0 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_r7>;
+       vmmc-supply = <&reg_vcc3v3>;
+       bus-width = <4>;
+       cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
+       cd-inverted;
+       status = "okay";
+};
+
+&mmc1 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&mmc1_pins_a>;
+       vmmc-supply = <&reg_vcc3v3>;
+       bus-width = <4>;
+       non-removable;
+       status = "okay";
+};
+
+&ohci0 {
+       status = "okay";
+};
+
+&pio {
+       mmc0_cd_pin_r7: mmc0_cd_pin@0 {
+               allwinner,pins = "PG1";
+               allwinner,function = "gpio_in";
+               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+               allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+       };
+
+       led_pins_r7: led_pins@0 {
+               allwinner,pins = "PB2";
+               allwinner,function = "gpio_out";
+               allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+       };
 
-       reg_usb1_vbus: usb1-vbus {
-               pinctrl-0 = <&usb1_vbus_pin_r7>;
-               gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>;
-               status = "okay";
+       usb1_vbus_pin_r7: usb1_vbus_pin@0 {
+               allwinner,pins = "PG13";
+               allwinner,function = "gpio_out";
+               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
        };
 };
+
+&reg_usb1_vbus {
+       pinctrl-0 = <&usb1_vbus_pin_r7>;
+       gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>;
+       status = "okay";
+};
+
+&uart0 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&uart0_pins_a>;
+       status = "okay";
+};
+
+&usbphy {
+       usb1_vbus-supply = <&reg_usb1_vbus>;
+       status = "okay";
+};