dt-bindings: memory-controllers: exynos5422-dmc: Correct example syntax and memory...

After adding the interrupt properties to Exynos5422 DMC bindings
example, the mapped memory region must be big enough to access
performance counters registers.

Fix also syntax errors (semicolons) and adjust indentation.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Lukasz Luba <l.luba@partner.samsung.com>

diff --git a/Documentation/devicetree/bindings/memory-controllers/exynos5422-dmc.txt b/Documentation/devicetree/bindings/memory-controllers/exynos5422-dmc.txt
index e2434ca..02e4a1f 100644 (file)
--- a/Documentation/devicetree/bindings/memory-controllers/exynos5422-dmc.txt
+++ b/Documentation/devicetree/bindings/memory-controllers/exynos5422-dmc.txt
@@ -55,7 +55,7 @@ Example:
 
        dmc: memory-controller@10c20000 {
                compatible = "samsung,exynos5422-dmc";
-               reg = <0x10c20000 0x100>, <0x10c30000 0x100>,
+               reg = <0x10c20000 0x10000>, <0x10c30000 0x10000>;
                clocks = <&clock CLK_FOUT_SPLL>,
                         <&clock CLK_MOUT_SCLK_SPLL>,
                         <&clock CLK_FF_DOUT_SPLL2>,
@@ -63,7 +63,7 @@ Example:
                         <&clock CLK_MOUT_BPLL>,
                         <&clock CLK_SCLK_BPLL>,
                         <&clock CLK_MOUT_MX_MSPLL_CCORE>,
-                        <&clock CLK_MOUT_MCLK_CDREX>,
+                        <&clock CLK_MOUT_MCLK_CDREX>;
                clock-names = "fout_spll",
                              "mout_sclk_spll",
                              "ff_dout_spll2",
@@ -71,10 +71,10 @@ Example:
                              "mout_bpll",
                              "sclk_bpll",
                              "mout_mx_mspll_ccore",
-                             "mout_mclk_cdrex",
+                             "mout_mclk_cdrex";
                operating-points-v2 = <&dmc_opp_table>;
                devfreq-events = <&ppmu_event3_dmc0_0>, <&ppmu_event3_dmc0_1>,
-                               <&ppmu_event3_dmc1_0>, <&ppmu_event3_dmc1_1>;
+                                <&ppmu_event3_dmc1_0>, <&ppmu_event3_dmc1_1>;
                device-handle = <&samsung_K3QF2F20DB>;
                vdd-supply = <&buck1_reg>;
                samsung,syscon-clk = <&clock>;