ARM: dts: mxs: modify mx23/mx28 dts files to use padconfig defines

Convert mx23/mx28 dts files to use the padconfig defintions from
mxs-pinfunc.h.

Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

diff --git a/arch/arm/boot/dts/imx23-evk.dts b/arch/arm/boot/dts/imx23-evk.dts
index fdd8b27..1f026ad 100644 (file)
--- a/arch/arm/boot/dts/imx23-evk.dts
+++ b/arch/arm/boot/dts/imx23-evk.dts
@@ -50,9 +50,9 @@
                                                MX23_PAD_PWM4__GPIO_1_30
                                                MX23_PAD_SSP1_DETECT__SSP1_DETECT
                                        >;
-                                       fsl,drive-strength = <0>;
-                                       fsl,voltage = <1>;
-                                       fsl,pull-up = <0>;
+                                       fsl,drive-strength = <MXS_DRIVE_4mA>;
+                                       fsl,voltage = <MXS_VOLTAGE_HIGH>;
+                                       fsl,pull-up = <MXS_PULL_DISABLE>;
                                };
                        };
 

diff --git a/arch/arm/boot/dts/imx23-olinuxino.dts b/arch/arm/boot/dts/imx23-olinuxino.dts
index f575434..526bfdb 100644 (file)
--- a/arch/arm/boot/dts/imx23-olinuxino.dts
+++ b/arch/arm/boot/dts/imx23-olinuxino.dts
@@ -42,9 +42,9 @@
                                        fsl,pinmux-ids = <
                                                MX23_PAD_GPMI_ALE__GPIO_0_17
                                        >;
-                                       fsl,drive-strength = <0>;
-                                       fsl,voltage = <1>;
-                                       fsl,pull-up = <0>;
+                                       fsl,drive-strength = <MXS_DRIVE_4mA>;
+                                       fsl,voltage = <MXS_VOLTAGE_HIGH>;
+                                       fsl,pull-up = <MXS_PULL_DISABLE>;
                                };
 
                                led_pin_gpio2_1: led_gpio2_1@0 {
@@ -52,9 +52,9 @@
                                        fsl,pinmux-ids = <
                                                MX23_PAD_SSP1_DETECT__GPIO_2_1
                                        >;
-                                       fsl,drive-strength = <0>;
-                                       fsl,voltage = <1>;
-                                       fsl,pull-up = <0>;
+                                       fsl,drive-strength = <MXS_DRIVE_4mA>;
+                                       fsl,voltage = <MXS_VOLTAGE_HIGH>;
+                                       fsl,pull-up = <MXS_PULL_DISABLE>;
                                };
                        };
 

diff --git a/arch/arm/boot/dts/imx23-stmp378x_devb.dts b/arch/arm/boot/dts/imx23-stmp378x_devb.dts
index 2c8a9b0..cb64e2b 100644 (file)
--- a/arch/arm/boot/dts/imx23-stmp378x_devb.dts
+++ b/arch/arm/boot/dts/imx23-stmp378x_devb.dts
@@ -42,9 +42,9 @@
                                                MX23_PAD_PWM3__GPIO_1_29
                                                MX23_PAD_PWM4__GPIO_1_30
                                        >;
-                                       fsl,drive-strength = <0>;
-                                       fsl,voltage = <1>;
-                                       fsl,pull-up = <0>;
+                                       fsl,drive-strength = <MXS_DRIVE_4mA>;
+                                       fsl,voltage = <MXS_VOLTAGE_HIGH>;
+                                       fsl,pull-up = <MXS_PULL_DISABLE>;
                                };
                        };
                };

diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi
index ff96e59..87faa6e 100644 (file)
--- a/arch/arm/boot/dts/imx23.dtsi
+++ b/arch/arm/boot/dts/imx23.dtsi
@@ -141,9 +141,9 @@
                                                MX23_PAD_PWM0__DUART_RX
                                                MX23_PAD_PWM1__DUART_TX
                                        >;
-                                       fsl,drive-strength = <0>;
-                                       fsl,voltage = <1>;
-                                       fsl,pull-up = <0>;
+                                       fsl,drive-strength = <MXS_DRIVE_4mA>;
+                                       fsl,voltage = <MXS_VOLTAGE_HIGH>;
+                                       fsl,pull-up = <MXS_PULL_DISABLE>;
                                };
 
                                auart0_pins_a: auart0@0 {
@@ -154,9 +154,9 @@
                                                MX23_PAD_AUART1_CTS__AUART1_CTS
                                                MX23_PAD_AUART1_RTS__AUART1_RTS
                                        >;
-                                       fsl,drive-strength = <0>;
-                                       fsl,voltage = <1>;
-                                       fsl,pull-up = <0>;
+                                       fsl,drive-strength = <MXS_DRIVE_4mA>;
+                                       fsl,voltage = <MXS_VOLTAGE_HIGH>;
+                                       fsl,pull-up = <MXS_PULL_DISABLE>;
                                };
 
                                auart0_2pins_a: auart0-2pins@0 {
@@ -165,9 +165,9 @@
                                                MX23_PAD_I2C_SCL__AUART1_TX
                                                MX23_PAD_I2C_SDA__AUART1_RX
                                        >;
-                                       fsl,drive-strength = <0>;
-                                       fsl,voltage = <1>;
-                                       fsl,pull-up = <0>;
+                                       fsl,drive-strength = <MXS_DRIVE_4mA>;
+                                       fsl,voltage = <MXS_VOLTAGE_HIGH>;
+                                       fsl,pull-up = <MXS_PULL_DISABLE>;
                                };
 
                                gpmi_pins_a: gpmi-nand@0 {
@@ -191,9 +191,9 @@
                                                MX23_PAD_GPMI_CE1N__GPMI_CE1N
                                                MX23_PAD_GPMI_CE0N__GPMI_CE0N
                                        >;
-                                       fsl,drive-strength = <0>;
-                                       fsl,voltage = <1>;
-                                       fsl,pull-up = <0>;
+                                       fsl,drive-strength = <MXS_DRIVE_4mA>;
+                                       fsl,voltage = <MXS_VOLTAGE_HIGH>;
+                                       fsl,pull-up = <MXS_PULL_DISABLE>;
                                };
 
                                gpmi_pins_fixup: gpmi-pins-fixup {
@@ -202,7 +202,7 @@
                                                MX23_PAD_GPMI_WRN__GPMI_WRN
                                                MX23_PAD_GPMI_RDN__GPMI_RDN
                                        >;
-                                       fsl,drive-strength = <2>;
+                                       fsl,drive-strength = <MXS_DRIVE_12mA>;
                                };
 
                                mmc0_4bit_pins_a: mmc0-4bit@0 {
@@ -215,9 +215,9 @@
                                                MX23_PAD_SSP1_CMD__SSP1_CMD
                                                MX23_PAD_SSP1_SCK__SSP1_SCK
                                        >;
-                                       fsl,drive-strength = <1>;
-                                       fsl,voltage = <1>;
-                                       fsl,pull-up = <1>;
+                                       fsl,drive-strength = <MXS_DRIVE_8mA>;
+                                       fsl,voltage = <MXS_VOLTAGE_HIGH>;
+                                       fsl,pull-up = <MXS_PULL_ENABLE>;
                                };
 
                                mmc0_8bit_pins_a: mmc0-8bit@0 {
@@ -235,9 +235,9 @@
                                                MX23_PAD_SSP1_DETECT__SSP1_DETECT
                                                MX23_PAD_SSP1_SCK__SSP1_SCK
                                        >;
-                                       fsl,drive-strength = <1>;
-                                       fsl,voltage = <1>;
-                                       fsl,pull-up = <1>;
+                                       fsl,drive-strength = <MXS_DRIVE_8mA>;
+                                       fsl,voltage = <MXS_VOLTAGE_HIGH>;
+                                       fsl,pull-up = <MXS_PULL_ENABLE>;
                                };
 
                                mmc0_pins_fixup: mmc0-pins-fixup {
@@ -245,7 +245,7 @@
                                                MX23_PAD_SSP1_DETECT__SSP1_DETECT
                                                MX23_PAD_SSP1_SCK__SSP1_SCK
                                        >;
-                                       fsl,pull-up = <0>;
+                                       fsl,pull-up = <MXS_PULL_DISABLE>;
                                };
 
                                pwm2_pins_a: pwm2@0 {
@@ -253,9 +253,9 @@
                                        fsl,pinmux-ids = <
                                                MX23_PAD_PWM2__PWM2
                                        >;
-                                       fsl,drive-strength = <0>;
-                                       fsl,voltage = <1>;
-                                       fsl,pull-up = <0>;
+                                       fsl,drive-strength = <MXS_DRIVE_4mA>;
+                                       fsl,voltage = <MXS_VOLTAGE_HIGH>;
+                                       fsl,pull-up = <MXS_PULL_DISABLE>;
                                };
 
                                lcdif_24bit_pins_a: lcdif-24bit@0 {
@@ -290,9 +290,9 @@
                                                MX23_PAD_LCD_HSYNC__LCD_HSYNC
                                                MX23_PAD_LCD_VSYNC__LCD_VSYNC
                                        >;
-                                       fsl,drive-strength = <0>;
-                                       fsl,voltage = <1>;
-                                       fsl,pull-up = <0>;
+                                       fsl,drive-strength = <MXS_DRIVE_4mA>;
+                                       fsl,voltage = <MXS_VOLTAGE_HIGH>;
+                                       fsl,pull-up = <MXS_PULL_DISABLE>;
                                };
 
                                spi2_pins_a: spi2@0 {
@@ -303,9 +303,9 @@
                                                MX23_PAD_GPMI_D00__SSP2_DATA0
                                                MX23_PAD_GPMI_D03__SSP2_DATA3
                                        >;
-                                       fsl,drive-strength = <1>;
-                                       fsl,voltage = <1>;
-                                       fsl,pull-up = <1>;
+                                       fsl,drive-strength = <MXS_DRIVE_8mA>;
+                                       fsl,voltage = <MXS_VOLTAGE_HIGH>;
+                                       fsl,pull-up = <MXS_PULL_ENABLE>;
                                };
                        };
 

diff --git a/arch/arm/boot/dts/imx28-apf28dev.dts b/arch/arm/boot/dts/imx28-apf28dev.dts
index 7d923cc..e2efd8d 100644 (file)
--- a/arch/arm/boot/dts/imx28-apf28dev.dts
+++ b/arch/arm/boot/dts/imx28-apf28dev.dts
@@ -49,9 +49,9 @@
                                                MX28_PAD_LCD_D21__GPIO_1_21
                                                MX28_PAD_LCD_D22__GPIO_1_22
                                        >;
-                                       fsl,drive-strength = <0>;
-                                       fsl,voltage = <1>;
-                                       fsl,pull-up = <0>;
+                                       fsl,drive-strength = <MXS_DRIVE_4mA>;
+                                       fsl,voltage = <MXS_VOLTAGE_HIGH>;
+                                       fsl,pull-up = <MXS_PULL_DISABLE>;
                                };
 
                                lcdif_pins_apf28dev: lcdif-apf28dev@0 {
@@ -62,9 +62,9 @@
                                                MX28_PAD_LCD_RS__LCD_DOTCLK
                                                MX28_PAD_LCD_CS__LCD_ENABLE
                                        >;
-                                       fsl,drive-strength = <0>;
-                                       fsl,voltage = <1>;
-                                       fsl,pull-up = <0>;
+                                       fsl,drive-strength = <MXS_DRIVE_4mA>;
+                                       fsl,voltage = <MXS_VOLTAGE_HIGH>;
+                                       fsl,pull-up = <MXS_PULL_DISABLE>;
                                };
                        };
 

diff --git a/arch/arm/boot/dts/imx28-apx4devkit.dts b/arch/arm/boot/dts/imx28-apx4devkit.dts
index cb19dc1..6f254ca 100644 (file)
--- a/arch/arm/boot/dts/imx28-apx4devkit.dts
+++ b/arch/arm/boot/dts/imx28-apx4devkit.dts
@@ -48,9 +48,9 @@
                                                MX28_PAD_LCD_RESET__GPIO_3_30
                                                MX28_PAD_JTAG_RTCK__GPIO_4_20
                                        >;
-                                       fsl,drive-strength = <0>;
-                                       fsl,voltage = <1>;
-                                       fsl,pull-up = <0>;
+                                       fsl,drive-strength = <MXS_DRIVE_4mA>;
+                                       fsl,voltage = <MXS_VOLTAGE_HIGH>;
+                                       fsl,pull-up = <MXS_PULL_DISABLE>;
                                };
 
                                lcdif_pins_apx4: lcdif-apx4@0 {
@@ -61,9 +61,9 @@
                                                MX28_PAD_LCD_RS__LCD_DOTCLK
                                                MX28_PAD_LCD_CS__LCD_ENABLE
                                        >;
-                                       fsl,drive-strength = <0>;
-                                       fsl,voltage = <1>;
-                                       fsl,pull-up = <0>;
+                                       fsl,drive-strength = <MXS_DRIVE_4mA>;
+                                       fsl,voltage = <MXS_VOLTAGE_HIGH>;
+                                       fsl,pull-up = <MXS_PULL_DISABLE>;
                                };
 
                                mmc2_4bit_pins_apx4: mmc2-4bit-apx4@0 {
@@ -76,17 +76,17 @@
                                                MX28_PAD_SSP2_SS1__SSP2_D1
                                                MX28_PAD_SSP2_SS2__SSP2_D2
                                        >;
-                                       fsl,drive-strength = <1>;
-                                       fsl,voltage = <1>;
-                                       fsl,pull-up = <1>;
+                                       fsl,drive-strength = <MXS_DRIVE_8mA>;
+                                       fsl,voltage = <MXS_VOLTAGE_HIGH>;
+                                       fsl,pull-up = <MXS_PULL_ENABLE>;
                                };
 
                                mmc2_sck_cfg_apx4: mmc2-sck-cfg-apx4 {
                                        fsl,pinmux-ids = <
                                                MX28_PAD_SSP0_DATA7__SSP2_SCK
                                        >;
-                                       fsl,drive-strength = <2>;
-                                       fsl,pull-up = <0>;
+                                       fsl,drive-strength = <MXS_DRIVE_12mA>;
+                                       fsl,pull-up = <MXS_PULL_DISABLE>;
                                };
                        };
 

diff --git a/arch/arm/boot/dts/imx28-cfa10036.dts b/arch/arm/boot/dts/imx28-cfa10036.dts
index 2474207..cabb617 100644 (file)
--- a/arch/arm/boot/dts/imx28-cfa10036.dts
+++ b/arch/arm/boot/dts/imx28-cfa10036.dts
@@ -28,9 +28,9 @@
                                        fsl,pinmux-ids = <
                                                MX28_PAD_SSP0_DATA7__GPIO_2_7
                                        >;
-                                       fsl,drive-strength = <0>;
-                                       fsl,voltage = <1>;
-                                       fsl,pull-up = <0>;
+                                       fsl,drive-strength = <MXS_DRIVE_4mA>;
+                                       fsl,voltage = <MXS_VOLTAGE_HIGH>;
+                                       fsl,pull-up = <MXS_PULL_DISABLE>;
                                };
 
                                led_pins_cfa10036: leds-10036@0 {
@@ -38,9 +38,9 @@
                                        fsl,pinmux-ids = <
                                                MX28_PAD_AUART1_RX__GPIO_3_4
                                        >;
-                                       fsl,drive-strength = <0>;
-                                       fsl,voltage = <1>;
-                                       fsl,pull-up = <0>;
+                                       fsl,drive-strength = <MXS_DRIVE_4mA>;
+                                       fsl,voltage = <MXS_VOLTAGE_HIGH>;
+                                       fsl,pull-up = <MXS_PULL_DISABLE>;
                                };
 
                                usb0_otg_cfa10036: otg-10036@0 {
@@ -48,9 +48,9 @@
                                        fsl,pinmux-ids = <
                                                MX28_PAD_GPMI_RDY0__USB0_ID
                                        >;
-                                       fsl,drive-strength = <0>;
-                                       fsl,voltage = <1>;
-                                       fsl,pull-up = <0>;
+                                       fsl,drive-strength = <MXS_DRIVE_4mA>;
+                                       fsl,voltage = <MXS_VOLTAGE_HIGH>;
+                                       fsl,pull-up = <MXS_PULL_DISABLE>;
                                };
 
                        };

diff --git a/arch/arm/boot/dts/imx28-cfa10037.dts b/arch/arm/boot/dts/imx28-cfa10037.dts
index 42a9a99..f93e9a7 100644 (file)
--- a/arch/arm/boot/dts/imx28-cfa10037.dts
+++ b/arch/arm/boot/dts/imx28-cfa10037.dts
@@ -27,9 +27,9 @@
                                        fsl,pinmux-ids = <
                                                MX28_PAD_GPMI_D07__GPIO_0_7
                                        >;
-                                       fsl,drive-strength = <0>;
-                                       fsl,voltage = <1>;
-                                       fsl,pull-up = <0>;
+                                       fsl,drive-strength = <MXS_DRIVE_4mA>;
+                                       fsl,voltage = <MXS_VOLTAGE_HIGH>;
+                                       fsl,pull-up = <MXS_PULL_DISABLE>;
                                };
 
                                mac0_pins_cfa10037: mac0-10037@0 {
@@ -37,9 +37,9 @@
                                        fsl,pinmux-ids = <
                                                MX28_PAD_SSP2_SS2__GPIO_2_21
                                        >;
-                                       fsl,drive-strength = <0>;
-                                       fsl,voltage = <1>;
-                                       fsl,pull-up = <0>;
+                                       fsl,drive-strength = <MXS_DRIVE_4mA>;
+                                       fsl,voltage = <MXS_VOLTAGE_HIGH>;
+                                       fsl,pull-up = <MXS_PULL_DISABLE>;
                                };
                        };
                };

diff --git a/arch/arm/boot/dts/imx28-cfa10049.dts b/arch/arm/boot/dts/imx28-cfa10049.dts
index 9ee2566..7087b4b 100644 (file)
--- a/arch/arm/boot/dts/imx28-cfa10049.dts
+++ b/arch/arm/boot/dts/imx28-cfa10049.dts
@@ -27,9 +27,9 @@
                                        fsl,pinmux-ids = <
                                                MX28_PAD_GPMI_D07__GPIO_0_7
                                        >;
-                                       fsl,drive-strength = <0>;
-                                       fsl,voltage = <1>;
-                                       fsl,pull-up = <0>;
+                                       fsl,drive-strength = <MXS_DRIVE_4mA>;
+                                       fsl,voltage = <MXS_VOLTAGE_HIGH>;
+                                       fsl,pull-up = <MXS_PULL_DISABLE>;
                                };
 
                                i2cmux_pins_cfa10049: i2cmux-10049@0 {
@@ -38,9 +38,9 @@
                                                MX28_PAD_LCD_D22__GPIO_1_22
                                                MX28_PAD_LCD_D23__GPIO_1_23
                                        >;
-                                       fsl,drive-strength = <0>;
-                                       fsl,voltage = <1>;
-                                       fsl,pull-up = <0>;
+                                       fsl,drive-strength = <MXS_DRIVE_4mA>;
+                                       fsl,voltage = <MXS_VOLTAGE_HIGH>;
+                                       fsl,pull-up = <MXS_PULL_DISABLE>;
                                };
 
                                mac0_pins_cfa10049: mac0-10049@0 {
@@ -48,9 +48,9 @@
                                        fsl,pinmux-ids = <
                                                MX28_PAD_SSP2_SS2__GPIO_2_21
                                        >;
-                                       fsl,drive-strength = <0>;
-                                       fsl,voltage = <1>;
-                                       fsl,pull-up = <0>;
+                                       fsl,drive-strength = <MXS_DRIVE_4mA>;
+                                       fsl,voltage = <MXS_VOLTAGE_HIGH>;
+                                       fsl,pull-up = <MXS_PULL_DISABLE>;
                                };
 
                                pca_pins_cfa10049: pca-10049@0 {
@@ -58,9 +58,9 @@
                                        fsl,pinmux-ids = <
                                                MX28_PAD_SSP2_SS0__GPIO_2_19
                                        >;
-                                       fsl,drive-strength = <0>;
-                                       fsl,voltage = <1>;
-                                       fsl,pull-up = <1>;
+                                       fsl,drive-strength = <MXS_DRIVE_4mA>;
+                                       fsl,voltage = <MXS_VOLTAGE_HIGH>;
+                                       fsl,pull-up = <MXS_PULL_ENABLE>;
                                };
 
                                rotary_pins_cfa10049: rotary-10049@0 {
@@ -69,9 +69,9 @@
                                                MX28_PAD_I2C0_SCL__GPIO_3_24
                                                MX28_PAD_I2C0_SDA__GPIO_3_25
                                        >;
-                                       fsl,drive-strength = <0>;
-                                       fsl,voltage = <1>;
-                                       fsl,pull-up = <1>;
+                                       fsl,drive-strength = <MXS_DRIVE_4mA>;
+                                       fsl,voltage = <MXS_VOLTAGE_HIGH>;
+                                       fsl,pull-up = <MXS_PULL_ENABLE>;
                                };
 
                                rotary_btn_pins_cfa10049: rotary-btn-10049@0 {
@@ -79,9 +79,9 @@
                                        fsl,pinmux-ids = <
                                                MX28_PAD_SAIF1_SDATA0__GPIO_3_26
                                        >;
-                                       fsl,drive-strength = <0>;
-                                       fsl,voltage = <1>;
-                                       fsl,pull-up = <1>;
+                                       fsl,drive-strength = <MXS_DRIVE_4mA>;
+                                       fsl,voltage = <MXS_VOLTAGE_HIGH>;
+                                       fsl,pull-up = <MXS_PULL_ENABLE>;
                                };
 
                                spi2_pins_cfa10049: spi2-cfa10049@0 {
@@ -92,9 +92,9 @@
                                                MX28_PAD_SSP2_MISO__GPIO_2_18
                                                MX28_PAD_AUART1_TX__GPIO_3_5
                                        >;
-                                       fsl,drive-strength = <1>;
-                                       fsl,voltage = <1>;
-                                       fsl,pull-up = <1>;
+                                       fsl,drive-strength = <MXS_DRIVE_8mA>;
+                                       fsl,voltage = <MXS_VOLTAGE_HIGH>;
+                                       fsl,pull-up = <MXS_PULL_ENABLE>;
                                };
 
                                spi3_pins_cfa10049: spi3-cfa10049@0 {
@@ -106,9 +106,9 @@
                                                MX28_PAD_GPMI_ALE__GPIO_0_26
                                                MX28_PAD_GPMI_CLE__GPIO_0_27
                                        >;
-                                       fsl,drive-strength = <1>;
-                                       fsl,voltage = <1>;
-                                       fsl,pull-up = <1>;
+                                       fsl,drive-strength = <MXS_DRIVE_8mA>;
+                                       fsl,voltage = <MXS_VOLTAGE_HIGH>;
+                                       fsl,pull-up = <MXS_PULL_ENABLE>;
                                };
 
                                lcdif_18bit_pins_cfa10049: lcdif-18bit@0 {
@@ -133,9 +133,9 @@
                                                MX28_PAD_LCD_D16__LCD_D16
                                                MX28_PAD_LCD_D17__LCD_D17
                                        >;
-                                       fsl,drive-strength = <0>;
-                                       fsl,voltage = <1>;
-                                       fsl,pull-up = <0>;
+                                       fsl,drive-strength = <MXS_DRIVE_4mA>;
+                                       fsl,voltage = <MXS_VOLTAGE_HIGH>;
+                                       fsl,pull-up = <MXS_PULL_DISABLE>;
                                };
 
                                lcdif_pins_cfa10049: lcdif-evk@0 {
@@ -146,9 +146,9 @@
                                                MX28_PAD_LCD_RS__LCD_DOTCLK
                                                MX28_PAD_LCD_CS__LCD_ENABLE
                                        >;
-                                       fsl,drive-strength = <0>;
-                                       fsl,voltage = <1>;
-                                       fsl,pull-up = <0>;
+                                       fsl,drive-strength = <MXS_DRIVE_4mA>;
+                                       fsl,voltage = <MXS_VOLTAGE_HIGH>;
+                                       fsl,pull-up = <MXS_PULL_DISABLE>;
                                };
 
                                lcdif_pins_cfa10049_pullup: lcdif-10049-pullup@0 {
@@ -156,9 +156,9 @@
                                        fsl,pinmux-ids = <
                                                MX28_PAD_LCD_RESET__GPIO_3_30
                                        >;
-                                       fsl,drive-strength = <0>;
-                                       fsl,voltage = <1>;
-                                       fsl,pull-up = <1>;
+                                       fsl,drive-strength = <MXS_DRIVE_4mA>;
+                                       fsl,voltage = <MXS_VOLTAGE_HIGH>;
+                                       fsl,pull-up = <MXS_PULL_ENABLE>;
                                };
 
                                w1_gpio_pins: w1-gpio@0 {
@@ -166,9 +166,9 @@
                                        fsl,pinmux-ids = <
                                                MX28_PAD_LCD_D21__GPIO_1_21
                                        >;
-                                       fsl,drive-strength = <1>;
-                                       fsl,voltage = <1>;
-                                       fsl,pull-up = <0>; /* 0 will enable the keeper */
+                                       fsl,drive-strength = <MXS_DRIVE_8mA>;
+                                       fsl,voltage = <MXS_VOLTAGE_HIGH>;
+                                       fsl,pull-up = <MXS_PULL_DISABLE>; /* 0 will enable the keeper */
                                };
                        };
 

diff --git a/arch/arm/boot/dts/imx28-cfa10055.dts b/arch/arm/boot/dts/imx28-cfa10055.dts
index 8b262a2..c3900e7 100644 (file)
--- a/arch/arm/boot/dts/imx28-cfa10055.dts
+++ b/arch/arm/boot/dts/imx28-cfa10055.dts
@@ -31,9 +31,9 @@
                                                MX28_PAD_SSP2_MISO__GPIO_2_18
                                                MX28_PAD_AUART1_TX__GPIO_3_5
                                        >;
-                                       fsl,drive-strength = <1>;
-                                       fsl,voltage = <1>;
-                                       fsl,pull-up = <1>;
+                                       fsl,drive-strength = <MXS_DRIVE_8mA>;
+                                       fsl,voltage = <MXS_VOLTAGE_HIGH>;
+                                       fsl,pull-up = <MXS_PULL_ENABLE>;
                                };
 
                                lcdif_18bit_pins_cfa10055: lcdif-18bit@0 {
@@ -58,9 +58,9 @@
                                                MX28_PAD_LCD_D16__LCD_D16
                                                MX28_PAD_LCD_D17__LCD_D17
                                        >;
-                                       fsl,drive-strength = <0>;
-                                       fsl,voltage = <1>;
-                                       fsl,pull-up = <0>;
+                                       fsl,drive-strength = <MXS_DRIVE_4mA>;
+                                       fsl,voltage = <MXS_VOLTAGE_HIGH>;
+                                       fsl,pull-up = <MXS_PULL_DISABLE>;
                                };
 
                                lcdif_pins_cfa10055: lcdif-evk@0 {
@@ -71,9 +71,9 @@
                                                MX28_PAD_LCD_RS__LCD_DOTCLK
                                                MX28_PAD_LCD_CS__LCD_ENABLE
                                        >;
-                                       fsl,drive-strength = <0>;
-                                       fsl,voltage = <1>;
-                                       fsl,pull-up = <0>;
+                                       fsl,drive-strength = <MXS_DRIVE_4mA>;
+                                       fsl,voltage = <MXS_VOLTAGE_HIGH>;
+                                       fsl,pull-up = <MXS_PULL_DISABLE>;
                                };
 
                                lcdif_pins_cfa10055_pullup: lcdif-10055-pullup@0 {
@@ -81,9 +81,9 @@
                                        fsl,pinmux-ids = <
                                                MX28_PAD_LCD_RESET__GPIO_3_30
                                        >;
-                                       fsl,drive-strength = <0>;
-                                       fsl,voltage = <1>;
-                                       fsl,pull-up = <1>;
+                                       fsl,drive-strength = <MXS_DRIVE_4mA>;
+                                       fsl,voltage = <MXS_VOLTAGE_HIGH>;
+                                       fsl,pull-up = <MXS_PULL_ENABLE>;
                                };
                        };
 

diff --git a/arch/arm/boot/dts/imx28-cfa10056.dts b/arch/arm/boot/dts/imx28-cfa10056.dts
index f651998..cef959a 100644 (file)
--- a/arch/arm/boot/dts/imx28-cfa10056.dts
+++ b/arch/arm/boot/dts/imx28-cfa10056.dts
@@ -30,9 +30,9 @@
                                                MX28_PAD_SSP2_MISO__GPIO_2_18
                                                MX28_PAD_AUART1_TX__GPIO_3_5
                                        >;
-                                       fsl,drive-strength = <1>;
-                                       fsl,voltage = <1>;
-                                       fsl,pull-up = <1>;
+                                       fsl,drive-strength = <MXS_DRIVE_8mA>;
+                                       fsl,voltage = <MXS_VOLTAGE_HIGH>;
+                                       fsl,pull-up = <MXS_PULL_ENABLE>;
                                };
 
                                lcdif_pins_cfa10056: lcdif-10056@0 {
@@ -43,9 +43,9 @@
                                                MX28_PAD_LCD_RS__LCD_DOTCLK
                                                MX28_PAD_LCD_CS__LCD_ENABLE
                                        >;
-                                       fsl,drive-strength = <0>;
-                                       fsl,voltage = <1>;
-                                       fsl,pull-up = <0>;
+                                       fsl,drive-strength = <MXS_DRIVE_4mA>;
+                                       fsl,voltage = <MXS_VOLTAGE_HIGH>;
+                                       fsl,pull-up = <MXS_PULL_DISABLE>;
                                };
 
                                lcdif_pins_cfa10056_pullup: lcdif-10056-pullup@0 {
@@ -53,9 +53,9 @@
                                        fsl,pinmux-ids = <
                                                MX28_PAD_LCD_RESET__GPIO_3_30
                                        >;
-                                       fsl,drive-strength = <0>;
-                                       fsl,voltage = <1>;
-                                       fsl,pull-up = <1>;
+                                       fsl,drive-strength = <MXS_DRIVE_4mA>;
+                                       fsl,voltage = <MXS_VOLTAGE_HIGH>;
+                                       fsl,pull-up = <MXS_PULL_ENABLE>;
                                };
                        };
 

diff --git a/arch/arm/boot/dts/imx28-cfa10057.dts b/arch/arm/boot/dts/imx28-cfa10057.dts
index 76430ca..3c13128 100644 (file)
--- a/arch/arm/boot/dts/imx28-cfa10057.dts
+++ b/arch/arm/boot/dts/imx28-cfa10057.dts
@@ -28,9 +28,9 @@
                                        fsl,pinmux-ids = <
                                                MX28_PAD_GPMI_D07__GPIO_0_7
                                        >;
-                                       fsl,drive-strength = <0>;
-                                       fsl,voltage = <1>;
-                                       fsl,pull-up = <0>;
+                                       fsl,drive-strength = <MXS_DRIVE_4mA>;
+                                       fsl,voltage = <MXS_VOLTAGE_HIGH>;
+                                       fsl,pull-up = <MXS_PULL_DISABLE>;
                                };
 
                                lcdif_18bit_pins_cfa10057: lcdif-18bit@0 {
@@ -55,9 +55,9 @@
                                                MX28_PAD_LCD_D16__LCD_D16
                                                MX28_PAD_LCD_D17__LCD_D17
                                        >;
-                                       fsl,drive-strength = <0>;
-                                       fsl,voltage = <1>;
-                                       fsl,pull-up = <0>;
+                                       fsl,drive-strength = <MXS_DRIVE_4mA>;
+                                       fsl,voltage = <MXS_VOLTAGE_HIGH>;
+                                       fsl,pull-up = <MXS_PULL_DISABLE>;
                                };
 
                                lcdif_pins_cfa10057: lcdif-evk@0 {
@@ -68,9 +68,9 @@
                                                MX28_PAD_LCD_RS__LCD_DOTCLK
                                                MX28_PAD_LCD_CS__LCD_ENABLE
                                        >;
-                                       fsl,drive-strength = <0>;
-                                       fsl,voltage = <1>;
-                                       fsl,pull-up = <0>;
+                                       fsl,drive-strength = <MXS_DRIVE_4mA>;
+                                       fsl,voltage = <MXS_VOLTAGE_HIGH>;
+                                       fsl,pull-up = <MXS_PULL_DISABLE>;
                                };
                        };
 

diff --git a/arch/arm/boot/dts/imx28-cfa10058.dts b/arch/arm/boot/dts/imx28-cfa10058.dts
index 502be77..2469d34 100644 (file)
--- a/arch/arm/boot/dts/imx28-cfa10058.dts
+++ b/arch/arm/boot/dts/imx28-cfa10058.dts
@@ -28,9 +28,9 @@
                                        fsl,pinmux-ids = <
                                                MX28_PAD_GPMI_D07__GPIO_0_7
                                        >;
-                                       fsl,drive-strength = <0>;
-                                       fsl,voltage = <1>;
-                                       fsl,pull-up = <0>;
+                                       fsl,drive-strength = <MXS_DRIVE_4mA>;
+                                       fsl,voltage = <MXS_VOLTAGE_HIGH>;
+                                       fsl,pull-up = <MXS_PULL_DISABLE>;
                                };
 
                                lcdif_pins_cfa10058: lcdif-10058@0 {
@@ -41,9 +41,9 @@
                                                MX28_PAD_LCD_RS__LCD_DOTCLK
                                                MX28_PAD_LCD_CS__LCD_ENABLE
                                        >;
-                                       fsl,drive-strength = <0>;
-                                       fsl,voltage = <1>;
-                                       fsl,pull-up = <0>;
+                                       fsl,drive-strength = <MXS_DRIVE_4mA>;
+                                       fsl,voltage = <MXS_VOLTAGE_HIGH>;
+                                       fsl,pull-up = <MXS_PULL_DISABLE>;
                                };
                        };
 

diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts
index 023eaf7..1f63845 100644 (file)
--- a/arch/arm/boot/dts/imx28-evk.dts
+++ b/arch/arm/boot/dts/imx28-evk.dts
@@ -79,9 +79,9 @@
                                                MX28_PAD_AUART2_RX__GPIO_3_8
                                                MX28_PAD_AUART2_TX__GPIO_3_9
                                        >;
-                                       fsl,drive-strength = <0>;
-                                       fsl,voltage = <1>;
-                                       fsl,pull-up = <0>;
+                                       fsl,drive-strength = <MXS_DRIVE_4mA>;
+                                       fsl,voltage = <MXS_VOLTAGE_HIGH>;
+                                       fsl,pull-up = <MXS_PULL_DISABLE>;
                                };
 
                                led_pin_gpio3_5: led_gpio3_5@0 {
@@ -89,9 +89,9 @@
                                        fsl,pinmux-ids = <
                                                MX28_PAD_AUART1_TX__GPIO_3_5
                                        >;
-                                       fsl,drive-strength = <0>;
-                                       fsl,voltage = <1>;
-                                       fsl,pull-up = <0>;
+                                       fsl,drive-strength = <MXS_DRIVE_4mA>;
+                                       fsl,voltage = <MXS_VOLTAGE_HIGH>;
+                                       fsl,pull-up = <MXS_PULL_DISABLE>;
                                };
 
                                gpmi_pins_evk: gpmi-nand-evk@0 {
@@ -100,9 +100,9 @@
                                                MX28_PAD_GPMI_CE1N__GPMI_CE1N
                                                MX28_PAD_GPMI_RDY1__GPMI_READY1
                                        >;
-                                       fsl,drive-strength = <0>;
-                                       fsl,voltage = <1>;
-                                       fsl,pull-up = <0>;
+                                       fsl,drive-strength = <MXS_DRIVE_4mA>;
+                                       fsl,voltage = <MXS_VOLTAGE_HIGH>;
+                                       fsl,pull-up = <MXS_PULL_DISABLE>;
                                };
 
                                lcdif_pins_evk: lcdif-evk@0 {
@@ -113,9 +113,9 @@
                                                MX28_PAD_LCD_RS__LCD_DOTCLK
                                                MX28_PAD_LCD_CS__LCD_ENABLE
                                        >;
-                                       fsl,drive-strength = <0>;
-                                       fsl,voltage = <1>;
-                                       fsl,pull-up = <0>;
+                                       fsl,drive-strength = <MXS_DRIVE_4mA>;
+                                       fsl,voltage = <MXS_VOLTAGE_HIGH>;
+                                       fsl,pull-up = <MXS_PULL_DISABLE>;
                                };
                        };
 

diff --git a/arch/arm/boot/dts/imx28-m28evk.dts b/arch/arm/boot/dts/imx28-m28evk.dts
index 9f3271d..8e2477f 100644 (file)
--- a/arch/arm/boot/dts/imx28-m28evk.dts
+++ b/arch/arm/boot/dts/imx28-m28evk.dts
@@ -98,9 +98,9 @@
                                                MX28_PAD_AUART3_RX__GPIO_3_12
                                                MX28_PAD_AUART3_TX__GPIO_3_13
                                        >;
-                                       fsl,drive-strength = <0>;
-                                       fsl,voltage = <1>;
-                                       fsl,pull-up = <0>;
+                                       fsl,drive-strength = <MXS_DRIVE_4mA>;
+                                       fsl,voltage = <MXS_VOLTAGE_HIGH>;
+                                       fsl,pull-up = <MXS_PULL_DISABLE>;
                                };
 
                                lcdif_pins_m28: lcdif-m28@0 {
@@ -109,9 +109,9 @@
                                                MX28_PAD_LCD_DOTCLK__LCD_DOTCLK
                                                MX28_PAD_LCD_ENABLE__LCD_ENABLE
                                        >;
-                                       fsl,drive-strength = <0>;
-                                       fsl,voltage = <1>;
-                                       fsl,pull-up = <0>;
+                                       fsl,drive-strength = <MXS_DRIVE_4mA>;
+                                       fsl,voltage = <MXS_VOLTAGE_HIGH>;
+                                       fsl,pull-up = <MXS_PULL_DISABLE>;
                                };
                        };
 

diff --git a/arch/arm/boot/dts/imx28-sps1.dts b/arch/arm/boot/dts/imx28-sps1.dts
index 4613522..4870f07 100644 (file)
--- a/arch/arm/boot/dts/imx28-sps1.dts
+++ b/arch/arm/boot/dts/imx28-sps1.dts
@@ -33,9 +33,9 @@
                                                MX28_PAD_GPMI_D03__GPIO_0_3
                                                MX28_PAD_GPMI_D06__GPIO_0_6
                                        >;
-                                       fsl,drive-strength = <0>;
-                                       fsl,voltage = <1>;
-                                       fsl,pull-up = <0>;
+                                       fsl,drive-strength = <MXS_DRIVE_4mA>;
+                                       fsl,voltage = <MXS_VOLTAGE_HIGH>;
+                                       fsl,pull-up = <MXS_PULL_DISABLE>;
                                };
 
                        };

diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index 1f16193..44151f5 100644 (file)
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -211,9 +211,9 @@
                                                MX28_PAD_PWM0__DUART_RX
                                                MX28_PAD_PWM1__DUART_TX
                                        >;
-                                       fsl,drive-strength = <0>;
-                                       fsl,voltage = <1>;
-                                       fsl,pull-up = <0>;
+                                       fsl,drive-strength = <MXS_DRIVE_4mA>;
+                                       fsl,voltage = <MXS_VOLTAGE_HIGH>;
+                                       fsl,pull-up = <MXS_PULL_DISABLE>;
                                };
 
                                duart_pins_b: duart@1 {
@@ -222,9 +222,9 @@
                                                MX28_PAD_AUART0_CTS__DUART_RX
                                                MX28_PAD_AUART0_RTS__DUART_TX
                                        >;
-                                       fsl,drive-strength = <0>;
-                                       fsl,voltage = <1>;
-                                       fsl,pull-up = <0>;
+                                       fsl,drive-strength = <MXS_DRIVE_4mA>;
+                                       fsl,voltage = <MXS_VOLTAGE_HIGH>;
+                                       fsl,pull-up = <MXS_PULL_DISABLE>;
                                };
 
                                duart_4pins_a: duart-4pins@0 {
@@ -235,9 +235,9 @@
                                                MX28_PAD_AUART0_RX__DUART_CTS
                                                MX28_PAD_AUART0_TX__DUART_RTS
                                        >;
-                                       fsl,drive-strength = <0>;
-                                       fsl,voltage = <1>;
-                                       fsl,pull-up = <0>;
+                                       fsl,drive-strength = <MXS_DRIVE_4mA>;
+                                       fsl,voltage = <MXS_VOLTAGE_HIGH>;
+                                       fsl,pull-up = <MXS_PULL_DISABLE>;
                                };
 
                                gpmi_pins_a: gpmi-nand@0 {
@@ -259,9 +259,9 @@
                                                MX28_PAD_GPMI_CLE__GPMI_CLE
                                                MX28_PAD_GPMI_RESETN__GPMI_RESETN
                                        >;
-                                       fsl,drive-strength = <0>;
-                                       fsl,voltage = <1>;
-                                       fsl,pull-up = <0>;
+                                       fsl,drive-strength = <MXS_DRIVE_4mA>;
+                                       fsl,voltage = <MXS_VOLTAGE_HIGH>;
+                                       fsl,pull-up = <MXS_PULL_DISABLE>;
                                };
 
                                gpmi_status_cfg: gpmi-status-cfg {
@@ -270,7 +270,7 @@
                                                MX28_PAD_GPMI_WRN__GPMI_WRN
                                                MX28_PAD_GPMI_RESETN__GPMI_RESETN
                                        >;
-                                       fsl,drive-strength = <2>;
+                                       fsl,drive-strength = <MXS_DRIVE_12mA>;
                                };
 
                                auart0_pins_a: auart0@0 {
@@ -281,9 +281,9 @@
                                                MX28_PAD_AUART0_CTS__AUART0_CTS
                                                MX28_PAD_AUART0_RTS__AUART0_RTS
                                        >;
-                                       fsl,drive-strength = <0>;
-                                       fsl,voltage = <1>;
-                                       fsl,pull-up = <0>;
+                                       fsl,drive-strength = <MXS_DRIVE_4mA>;
+                                       fsl,voltage = <MXS_VOLTAGE_HIGH>;
+                                       fsl,pull-up = <MXS_PULL_DISABLE>;
                                };
 
                                auart0_2pins_a: auart0-2pins@0 {
@@ -292,9 +292,9 @@
                                                MX28_PAD_AUART0_RX__AUART0_RX
                                                MX28_PAD_AUART0_TX__AUART0_TX
                                        >;
-                                       fsl,drive-strength = <0>;
-                                       fsl,voltage = <1>;
-                                       fsl,pull-up = <0>;
+                                       fsl,drive-strength = <MXS_DRIVE_4mA>;
+                                       fsl,voltage = <MXS_VOLTAGE_HIGH>;
+                                       fsl,pull-up = <MXS_PULL_DISABLE>;
                                };
 
                                auart1_pins_a: auart1@0 {
@@ -305,9 +305,9 @@
                                                MX28_PAD_AUART1_CTS__AUART1_CTS
                                                MX28_PAD_AUART1_RTS__AUART1_RTS
                                        >;
-                                       fsl,drive-strength = <0>;
-                                       fsl,voltage = <1>;
-                                       fsl,pull-up = <0>;
+                                       fsl,drive-strength = <MXS_DRIVE_4mA>;
+                                       fsl,voltage = <MXS_VOLTAGE_HIGH>;
+                                       fsl,pull-up = <MXS_PULL_DISABLE>;
                                };
 
                                auart1_2pins_a: auart1-2pins@0 {
@@ -316,9 +316,9 @@
                                                MX28_PAD_AUART1_RX__AUART1_RX
                                                MX28_PAD_AUART1_TX__AUART1_TX
                                        >;
-                                       fsl,drive-strength = <0>;
-                                       fsl,voltage = <1>;
-                                       fsl,pull-up = <0>;
+                                       fsl,drive-strength = <MXS_DRIVE_4mA>;
+                                       fsl,voltage = <MXS_VOLTAGE_HIGH>;
+                                       fsl,pull-up = <MXS_PULL_DISABLE>;
                                };
 
                                auart2_2pins_a: auart2-2pins@0 {
@@ -327,9 +327,9 @@
                                                MX28_PAD_SSP2_SCK__AUART2_RX
                                                MX28_PAD_SSP2_MOSI__AUART2_TX
                                        >;
-                                       fsl,drive-strength = <0>;
-                                       fsl,voltage = <1>;
-                                       fsl,pull-up = <0>;
+                                       fsl,drive-strength = <MXS_DRIVE_4mA>;
+                                       fsl,voltage = <MXS_VOLTAGE_HIGH>;
+                                       fsl,pull-up = <MXS_PULL_DISABLE>;
                                };
 
                                auart2_2pins_b: auart2-2pins@1 {
@@ -338,9 +338,9 @@
                                                MX28_PAD_AUART2_RX__AUART2_RX
                                                MX28_PAD_AUART2_TX__AUART2_TX
                                        >;
-                                       fsl,drive-strength = <0>;
-                                       fsl,voltage = <1>;
-                                       fsl,pull-up = <0>;
+                                       fsl,drive-strength = <MXS_DRIVE_4mA>;
+                                       fsl,voltage = <MXS_VOLTAGE_HIGH>;
+                                       fsl,pull-up = <MXS_PULL_DISABLE>;
                                };
 
                                auart3_pins_a: auart3@0 {
@@ -351,9 +351,9 @@
                                                MX28_PAD_AUART3_CTS__AUART3_CTS
                                                MX28_PAD_AUART3_RTS__AUART3_RTS
                                        >;
-                                       fsl,drive-strength = <0>;
-                                       fsl,voltage = <1>;
-                                       fsl,pull-up = <0>;
+                                       fsl,drive-strength = <MXS_DRIVE_4mA>;
+                                       fsl,voltage = <MXS_VOLTAGE_HIGH>;
+                                       fsl,pull-up = <MXS_PULL_DISABLE>;
                                };
 
                                auart3_2pins_a: auart3-2pins@0 {
@@ -362,9 +362,9 @@
                                                MX28_PAD_SSP2_MISO__AUART3_RX
                                                MX28_PAD_SSP2_SS0__AUART3_TX
                                        >;
-                                       fsl,drive-strength = <0>;
-                                       fsl,voltage = <1>;
-                                       fsl,pull-up = <0>;
+                                       fsl,drive-strength = <MXS_DRIVE_4mA>;
+                                       fsl,voltage = <MXS_VOLTAGE_HIGH>;
+                                       fsl,pull-up = <MXS_PULL_DISABLE>;
                                };
 
                                auart3_2pins_b: auart3-2pins@1 {
@@ -373,9 +373,9 @@
                                                MX28_PAD_AUART3_RX__AUART3_RX
                                                MX28_PAD_AUART3_TX__AUART3_TX
                                        >;
-                                       fsl,drive-strength = <0>;
-                                       fsl,voltage = <1>;
-                                       fsl,pull-up = <0>;
+                                       fsl,drive-strength = <MXS_DRIVE_4mA>;
+                                       fsl,voltage = <MXS_VOLTAGE_HIGH>;
+                                       fsl,pull-up = <MXS_PULL_DISABLE>;
                                };
 
                                auart4_2pins_a: auart4@0 {
@@ -384,9 +384,9 @@
                                                MX28_PAD_SSP3_SCK__AUART4_TX
                                                MX28_PAD_SSP3_MOSI__AUART4_RX
                                        >;
-                                       fsl,drive-strength = <0>;
-                                       fsl,voltage = <1>;
-                                       fsl,pull-up = <0>;
+                                       fsl,drive-strength = <MXS_DRIVE_4mA>;
+                                       fsl,voltage = <MXS_VOLTAGE_HIGH>;
+                                       fsl,pull-up = <MXS_PULL_DISABLE>;
                                };
 
                                mac0_pins_a: mac0@0 {
@@ -402,9 +402,9 @@
                                                MX28_PAD_ENET0_TXD1__ENET0_TXD1
                                                MX28_PAD_ENET_CLK__CLKCTRL_ENET
                                        >;
-                                       fsl,drive-strength = <1>;
-                                       fsl,voltage = <1>;
-                                       fsl,pull-up = <1>;
+                                       fsl,drive-strength = <MXS_DRIVE_8mA>;
+                                       fsl,voltage = <MXS_VOLTAGE_HIGH>;
+                                       fsl,pull-up = <MXS_PULL_ENABLE>;
                                };
 
                                mac1_pins_a: mac1@0 {
@@ -417,9 +417,9 @@
                                                MX28_PAD_ENET0_TXD2__ENET1_TXD0
                                                MX28_PAD_ENET0_TXD3__ENET1_TXD1
                                        >;
-                                       fsl,drive-strength = <1>;
-                                       fsl,voltage = <1>;
-                                       fsl,pull-up = <1>;
+                                       fsl,drive-strength = <MXS_DRIVE_8mA>;
+                                       fsl,voltage = <MXS_VOLTAGE_HIGH>;
+                                       fsl,pull-up = <MXS_PULL_ENABLE>;
                                };
 
                                mmc0_8bit_pins_a: mmc0-8bit@0 {
@@ -437,9 +437,9 @@
                                                MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT
                                                MX28_PAD_SSP0_SCK__SSP0_SCK
                                        >;
-                                       fsl,drive-strength = <1>;
-                                       fsl,voltage = <1>;
-                                       fsl,pull-up = <1>;
+                                       fsl,drive-strength = <MXS_DRIVE_8mA>;
+                                       fsl,voltage = <MXS_VOLTAGE_HIGH>;
+                                       fsl,pull-up = <MXS_PULL_ENABLE>;
                                };
 
                                mmc0_4bit_pins_a: mmc0-4bit@0 {
@@ -453,24 +453,24 @@
                                                MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT
                                                MX28_PAD_SSP0_SCK__SSP0_SCK
                                        >;
-                                       fsl,drive-strength = <1>;
-                                       fsl,voltage = <1>;
-                                       fsl,pull-up = <1>;
+                                       fsl,drive-strength = <MXS_DRIVE_8mA>;
+                                       fsl,voltage = <MXS_VOLTAGE_HIGH>;
+                                       fsl,pull-up = <MXS_PULL_ENABLE>;
                                };
 
                                mmc0_cd_cfg: mmc0-cd-cfg {
                                        fsl,pinmux-ids = <
                                                MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT
                                        >;
-                                       fsl,pull-up = <0>;
+                                       fsl,pull-up = <MXS_PULL_DISABLE>;
                                };
 
                                mmc0_sck_cfg: mmc0-sck-cfg {
                                        fsl,pinmux-ids = <
                                                MX28_PAD_SSP0_SCK__SSP0_SCK
                                        >;
-                                       fsl,drive-strength = <2>;
-                                       fsl,pull-up = <0>;
+                                       fsl,drive-strength = <MXS_DRIVE_12mA>;
+                                       fsl,pull-up = <MXS_PULL_DISABLE>;
                                };
 
                                i2c0_pins_a: i2c0@0 {
@@ -479,9 +479,9 @@
                                                MX28_PAD_I2C0_SCL__I2C0_SCL
                                                MX28_PAD_I2C0_SDA__I2C0_SDA
                                        >;
-                                       fsl,drive-strength = <1>;
-                                       fsl,voltage = <1>;
-                                       fsl,pull-up = <1>;
+                                       fsl,drive-strength = <MXS_DRIVE_8mA>;
+                                       fsl,voltage = <MXS_VOLTAGE_HIGH>;
+                                       fsl,pull-up = <MXS_PULL_ENABLE>;
                                };
 
                                i2c0_pins_b: i2c0@1 {
@@ -490,9 +490,9 @@
                                                MX28_PAD_AUART0_RX__I2C0_SCL
                                                MX28_PAD_AUART0_TX__I2C0_SDA
                                        >;
-                                       fsl,drive-strength = <1>;
-                                       fsl,voltage = <1>;
-                                       fsl,pull-up = <1>;
+                                       fsl,drive-strength = <MXS_DRIVE_8mA>;
+                                       fsl,voltage = <MXS_VOLTAGE_HIGH>;
+                                       fsl,pull-up = <MXS_PULL_ENABLE>;
                                };
 
                                i2c1_pins_a: i2c1@0 {
@@ -501,9 +501,9 @@
                                                MX28_PAD_PWM0__I2C1_SCL
                                                MX28_PAD_PWM1__I2C1_SDA
                                        >;
-                                       fsl,drive-strength = <1>;
-                                       fsl,voltage = <1>;
-                                       fsl,pull-up = <1>;
+                                       fsl,drive-strength = <MXS_DRIVE_8mA>;
+                                       fsl,voltage = <MXS_VOLTAGE_HIGH>;
+                                       fsl,pull-up = <MXS_PULL_ENABLE>;
                                };
 
                                saif0_pins_a: saif0@0 {
@@ -514,9 +514,9 @@
                                                MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK
                                                MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0
                                        >;
-                                       fsl,drive-strength = <2>;
-                                       fsl,voltage = <1>;
-                                       fsl,pull-up = <1>;
+                                       fsl,drive-strength = <MXS_DRIVE_12mA>;
+                                       fsl,voltage = <MXS_VOLTAGE_HIGH>;
+                                       fsl,pull-up = <MXS_PULL_ENABLE>;
                                };
 
                                saif0_pins_b: saif0@1 {
@@ -526,9 +526,9 @@
                                                MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK
                                                MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0
                                        >;
-                                       fsl,drive-strength = <2>;
-                                       fsl,voltage = <1>;
-                                       fsl,pull-up = <1>;
+                                       fsl,drive-strength = <MXS_DRIVE_12mA>;
+                                       fsl,voltage = <MXS_VOLTAGE_HIGH>;
+                                       fsl,pull-up = <MXS_PULL_ENABLE>;
                                };
 
                                saif1_pins_a: saif1@0 {
@@ -536,9 +536,9 @@
                                        fsl,pinmux-ids = <
                                                MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0
                                        >;
-                                       fsl,drive-strength = <2>;
-                                       fsl,voltage = <1>;
-                                       fsl,pull-up = <1>;
+                                       fsl,drive-strength = <MXS_DRIVE_12mA>;
+                                       fsl,voltage = <MXS_VOLTAGE_HIGH>;
+                                       fsl,pull-up = <MXS_PULL_ENABLE>;
                                };
 
                                pwm0_pins_a: pwm0@0 {
@@ -546,9 +546,9 @@
                                        fsl,pinmux-ids = <
                                                MX28_PAD_PWM0__PWM_0
                                        >;
-                                       fsl,drive-strength = <0>;
-                                       fsl,voltage = <1>;
-                                       fsl,pull-up = <0>;
+                                       fsl,drive-strength = <MXS_DRIVE_4mA>;
+                                       fsl,voltage = <MXS_VOLTAGE_HIGH>;
+                                       fsl,pull-up = <MXS_PULL_DISABLE>;
                                };
 
                                pwm2_pins_a: pwm2@0 {
@@ -556,9 +556,9 @@
                                        fsl,pinmux-ids = <
                                                MX28_PAD_PWM2__PWM_2
                                        >;
-                                       fsl,drive-strength = <0>;
-                                       fsl,voltage = <1>;
-                                       fsl,pull-up = <0>;
+                                       fsl,drive-strength = <MXS_DRIVE_4mA>;
+                                       fsl,voltage = <MXS_VOLTAGE_HIGH>;
+                                       fsl,pull-up = <MXS_PULL_DISABLE>;
                                };
 
                                pwm3_pins_a: pwm3@0 {
@@ -566,9 +566,9 @@
                                        fsl,pinmux-ids = <
                                                MX28_PAD_PWM3__PWM_3
                                        >;
-                                       fsl,drive-strength = <0>;
-                                       fsl,voltage = <1>;
-                                       fsl,pull-up = <0>;
+                                       fsl,drive-strength = <MXS_DRIVE_4mA>;
+                                       fsl,voltage = <MXS_VOLTAGE_HIGH>;
+                                       fsl,pull-up = <MXS_PULL_DISABLE>;
                                };
 
                                pwm3_pins_b: pwm3@1 {
@@ -576,9 +576,9 @@
                                        fsl,pinmux-ids = <
                                                MX28_PAD_SAIF0_MCLK__PWM_3
                                        >;
-                                       fsl,drive-strength = <0>;
-                                       fsl,voltage = <1>;
-                                       fsl,pull-up = <0>;
+                                       fsl,drive-strength = <MXS_DRIVE_4mA>;
+                                       fsl,voltage = <MXS_VOLTAGE_HIGH>;
+                                       fsl,pull-up = <MXS_PULL_DISABLE>;
                                };
 
                                pwm4_pins_a: pwm4@0 {
@@ -586,9 +586,9 @@
                                        fsl,pinmux-ids = <
                                                MX28_PAD_PWM4__PWM_4
                                        >;
-                                       fsl,drive-strength = <0>;
-                                       fsl,voltage = <1>;
-                                       fsl,pull-up = <0>;
+                                       fsl,drive-strength = <MXS_DRIVE_4mA>;
+                                       fsl,voltage = <MXS_VOLTAGE_HIGH>;
+                                       fsl,pull-up = <MXS_PULL_DISABLE>;
                                };
 
                                lcdif_24bit_pins_a: lcdif-24bit@0 {
@@ -619,9 +619,9 @@
                                                MX28_PAD_LCD_D22__LCD_D22
                                                MX28_PAD_LCD_D23__LCD_D23
                                        >;
-                                       fsl,drive-strength = <0>;
-                                       fsl,voltage = <1>;
-                                       fsl,pull-up = <0>;
+                                       fsl,drive-strength = <MXS_DRIVE_4mA>;
+                                       fsl,voltage = <MXS_VOLTAGE_HIGH>;
+                                       fsl,pull-up = <MXS_PULL_DISABLE>;
                                };
 
                                lcdif_16bit_pins_a: lcdif-16bit@0 {
@@ -644,9 +644,9 @@
                                                MX28_PAD_LCD_D14__LCD_D14
                                                MX28_PAD_LCD_D15__LCD_D15
                                        >;
-                                       fsl,drive-strength = <0>;
-                                       fsl,voltage = <1>;
-                                       fsl,pull-up = <0>;
+                                       fsl,drive-strength = <MXS_DRIVE_4mA>;
+                                       fsl,voltage = <MXS_VOLTAGE_HIGH>;
+                                       fsl,pull-up = <MXS_PULL_DISABLE>;
                                };
 
                                lcdif_sync_pins_a: lcdif-sync@0 {
@@ -657,9 +657,9 @@
                                                MX28_PAD_LCD_RD_E__LCD_VSYNC
                                                MX28_PAD_LCD_WR_RWN__LCD_HSYNC
                                        >;
-                                       fsl,drive-strength = <0>;
-                                       fsl,voltage = <1>;
-                                       fsl,pull-up = <0>;
+                                       fsl,drive-strength = <MXS_DRIVE_4mA>;
+                                       fsl,voltage = <MXS_VOLTAGE_HIGH>;
+                                       fsl,pull-up = <MXS_PULL_DISABLE>;
                                };
 
                                can0_pins_a: can0@0 {
@@ -668,9 +668,9 @@
                                                MX28_PAD_GPMI_RDY2__CAN0_TX
                                                MX28_PAD_GPMI_RDY3__CAN0_RX
                                        >;
-                                       fsl,drive-strength = <0>;
-                                       fsl,voltage = <1>;
-                                       fsl,pull-up = <0>;
+                                       fsl,drive-strength = <MXS_DRIVE_4mA>;
+                                       fsl,voltage = <MXS_VOLTAGE_HIGH>;
+                                       fsl,pull-up = <MXS_PULL_DISABLE>;
                                };
 
                                can1_pins_a: can1@0 {
@@ -679,9 +679,9 @@
                                                MX28_PAD_GPMI_CE2N__CAN1_TX
                                                MX28_PAD_GPMI_CE3N__CAN1_RX
                                        >;
-                                       fsl,drive-strength = <0>;
-                                       fsl,voltage = <1>;
-                                       fsl,pull-up = <0>;
+                                       fsl,drive-strength = <MXS_DRIVE_4mA>;
+                                       fsl,voltage = <MXS_VOLTAGE_HIGH>;
+                                       fsl,pull-up = <MXS_PULL_DISABLE>;
                                };
 
                                spi2_pins_a: spi2@0 {
@@ -692,9 +692,9 @@
                                                MX28_PAD_SSP2_MISO__SSP2_D0
                                                MX28_PAD_SSP2_SS0__SSP2_D3
                                        >;
-                                       fsl,drive-strength = <1>;
-                                       fsl,voltage = <1>;
-                                       fsl,pull-up = <1>;
+                                       fsl,drive-strength = <MXS_DRIVE_8mA>;
+                                       fsl,voltage = <MXS_VOLTAGE_HIGH>;
+                                       fsl,pull-up = <MXS_PULL_ENABLE>;
                                };
 
                                spi3_pins_a: spi3@0 {
@@ -707,9 +707,9 @@
                                                MX28_PAD_SSP3_MISO__SSP3_D0
                                                MX28_PAD_SSP3_SS0__SSP3_D3
                                        >;
-                                       fsl,drive-strength = <1>;
-                                       fsl,voltage = <1>;
-                                       fsl,pull-up = <0>;
+                                       fsl,drive-strength = <MXS_DRIVE_8mA>;
+                                       fsl,voltage = <MXS_VOLTAGE_HIGH>;
+                                       fsl,pull-up = <MXS_PULL_DISABLE>;
                                };
 
                                usbphy0_pins_a: usbphy0@0 {
@@ -717,9 +717,9 @@
                                        fsl,pinmux-ids = <
                                                MX28_PAD_SSP2_SS2__USB0_OVERCURRENT
                                        >;
-                                       fsl,drive-strength = <2>;
-                                       fsl,voltage = <1>;
-                                       fsl,pull-up = <0>;
+                                       fsl,drive-strength = <MXS_DRIVE_12mA>;
+                                       fsl,voltage = <MXS_VOLTAGE_HIGH>;
+                                       fsl,pull-up = <MXS_PULL_DISABLE>;
                                };
 
                                usbphy0_pins_b: usbphy0@1 {
@@ -727,9 +727,9 @@
                                        fsl,pinmux-ids = <
                                                MX28_PAD_AUART1_CTS__USB0_OVERCURRENT
                                        >;
-                                       fsl,drive-strength = <2>;
-                                       fsl,voltage = <1>;
-                                       fsl,pull-up = <0>;
+                                       fsl,drive-strength = <MXS_DRIVE_12mA>;
+                                       fsl,voltage = <MXS_VOLTAGE_HIGH>;
+                                       fsl,pull-up = <MXS_PULL_DISABLE>;
                                };
 
                                usbphy1_pins_a: usbphy1@0 {
@@ -737,9 +737,9 @@
                                        fsl,pinmux-ids = <
                                                MX28_PAD_SSP2_SS1__USB1_OVERCURRENT
                                        >;
-                                       fsl,drive-strength = <2>;
-                                       fsl,voltage = <1>;
-                                       fsl,pull-up = <0>;
+                                       fsl,drive-strength = <MXS_DRIVE_12mA>;
+                                       fsl,voltage = <MXS_VOLTAGE_HIGH>;
+                                       fsl,pull-up = <MXS_PULL_DISABLE>;
                                };
 
                                usb0_id_pins_a: usb0id@0 {