pdata->buck1_voltage[i] +
buck1245_voltage_map_desc.step);
if (ret < 0)
- goto err_out;
+ return ret;
max8997->buck2_vol[i] = ret =
max8997_get_voltage_proper_val(
pdata->buck2_voltage[i] +
buck1245_voltage_map_desc.step);
if (ret < 0)
- goto err_out;
+ return ret;
max8997->buck5_vol[i] = ret =
max8997_get_voltage_proper_val(
pdata->buck5_voltage[i] +
buck1245_voltage_map_desc.step);
if (ret < 0)
- goto err_out;
+ return ret;
if (max_buck1 < max8997->buck1_vol[i])
max_buck1 = max8997->buck1_vol[i];
!gpio_is_valid(pdata->buck125_gpios[1]) ||
!gpio_is_valid(pdata->buck125_gpios[2])) {
dev_err(&pdev->dev, "GPIO NOT VALID\n");
- ret = -EINVAL;
- goto err_out;
+ return -EINVAL;
}
ret = devm_gpio_request(&pdev->dev, pdata->buck125_gpios[0],
"MAX8997 SET1");
if (ret)
- goto err_out;
+ return ret;
ret = devm_gpio_request(&pdev->dev, pdata->buck125_gpios[1],
"MAX8997 SET2");
if (ret)
- goto err_out;
+ return ret;
ret = devm_gpio_request(&pdev->dev, pdata->buck125_gpios[2],
"MAX8997 SET3");
if (ret)
- goto err_out;
+ return ret;
gpio_direction_output(pdata->buck125_gpios[0],
(max8997->buck125_gpioindex >> 2)
config.driver_data = max8997;
config.of_node = pdata->regulators[i].reg_node;
- rdev[i] = regulator_register(®ulators[id], &config);
+ rdev[i] = devm_regulator_register(&pdev->dev, ®ulators[id],
+ &config);
if (IS_ERR(rdev[i])) {
- ret = PTR_ERR(rdev[i]);
dev_err(max8997->dev, "regulator init failed for %d\n",
id);
rdev[i] = NULL;
- goto err;
+ return PTR_ERR(rdev[i]);
}
}
return 0;
-err:
- while (--i >= 0)
- regulator_unregister(rdev[i]);
-err_out:
- return ret;
-}
-
-static int max8997_pmic_remove(struct platform_device *pdev)
-{
- struct max8997_data *max8997 = platform_get_drvdata(pdev);
- struct regulator_dev **rdev = max8997->rdev;
- int i;
-
- for (i = 0; i < max8997->num_regulators; i++)
- regulator_unregister(rdev[i]);
- return 0;
}
static const struct platform_device_id max8997_pmic_id[] = {
.owner = THIS_MODULE,
},
.probe = max8997_pmic_probe,
- .remove = max8997_pmic_remove,
.id_table = max8997_pmic_id,
};