#define STRING_SIZE_SIZE (4)
static long sec_to_styp_flags PARAMS ((const char *, flagword));
-static flagword styp_to_sec_flags PARAMS ((bfd *, PTR, const char *));
+static flagword styp_to_sec_flags
+ PARAMS ((bfd *, PTR, const char *, asection *));
static boolean coff_bad_format_hook PARAMS ((bfd *, PTR));
static void coff_set_custom_section_alignment
PARAMS ((bfd *, asection *, const struct coff_section_alignment_entry *,
\f
/* void warning(); */
-/*
- * Return a word with STYP_* (scnhdr.s_flags) flags set to represent the
- * incoming SEC_* flags. The inverse of this function is styp_to_sec_flags().
- * NOTE: If you add to/change this routine, you should mirror the changes
- * in styp_to_sec_flags().
- */
+/* Return a word with STYP_* (scnhdr.s_flags) flags set to represent
+ the incoming SEC_* flags. The inverse of this function is
+ styp_to_sec_flags(). NOTE: If you add to/change this routine, you
+ should probably mirror the changes in styp_to_sec_flags(). */
+
+#ifndef COFF_WITH_PE
+
static long
sec_to_styp_flags (sec_name, sec_flags)
CONST char *sec_name;
{
styp_flags = STYP_INFO;
}
-#ifdef COFF_WITH_PE
- else if (!strcmp (sec_name, ".edata"))
- {
- styp_flags = STYP_DATA;
- }
-#endif
#ifdef RS6000COFF_C
else if (!strcmp (sec_name, _PAD))
{
styp_flags |= STYP_NOLOAD;
#endif
-#ifdef COFF_WITH_PE
- if (sec_flags & SEC_LINK_ONCE)
+ return styp_flags;
+}
+
+#else /* COFF_WITH_PE */
+
+/* The PE version; see above for the general comments. The non-PE
+ case seems to be more guessing, and breaks PE format; specifically,
+ .rdata is readonly, but it sure ain't text. Really, all this
+ should be set up properly in gas (or whatever assembler is in use),
+ and honor whatever objcopy/strip, etc. sent us as input. */
+
+static long
+sec_to_styp_flags (sec_name, sec_flags)
+ const char *sec_name ATTRIBUTE_UNUSED;
+ flagword sec_flags;
+{
+ long styp_flags = 0;
+
+ /* caution: there are at least three groups of symbols that have
+ very similar bits and meanings: IMAGE_SCN*, SEC_*, and STYP_*.
+ SEC_* are the BFD internal flags, used for generic BFD
+ information. STYP_* are the COFF section flags which appear in
+ COFF files. IMAGE_SCN_* are the PE section flags which appear in
+ PE files. The STYP_* flags and the IMAGE_SCN_* flags overlap,
+ but there are more IMAGE_SCN_* flags. */
+
+ /* skip LOAD */
+ /* READONLY later */
+ /* skip RELOC */
+ if ((sec_flags & SEC_CODE) != 0)
+ styp_flags |= IMAGE_SCN_CNT_CODE;
+ if ((sec_flags & SEC_DATA) != 0)
+ styp_flags |= IMAGE_SCN_CNT_INITIALIZED_DATA;
+ if ((sec_flags & SEC_ALLOC) != 0 && (sec_flags & SEC_LOAD) == 0)
+ styp_flags |= IMAGE_SCN_CNT_UNINITIALIZED_DATA; /* ==STYP_BSS */
+ /* skip ROM */
+ /* skip CONSTRUCTOR */
+ /* skip CONTENTS */
+#ifdef STYP_NOLOAD
+ if ((sec_flags & (SEC_NEVER_LOAD | SEC_COFF_SHARED_LIBRARY)) != 0)
+ styp_flags |= STYP_NOLOAD;
+#endif
+ if ((sec_flags & SEC_IS_COMMON) != 0)
styp_flags |= IMAGE_SCN_LNK_COMDAT;
+ if ((sec_flags & SEC_DEBUGGING) != 0)
+ styp_flags |= IMAGE_SCN_MEM_DISCARDABLE;
+ if ((sec_flags & SEC_EXCLUDE) != 0)
+ styp_flags |= IMAGE_SCN_LNK_REMOVE;
+ if ((sec_flags & SEC_NEVER_LOAD) != 0)
+ styp_flags |= IMAGE_SCN_LNK_REMOVE;
+ /* skip IN_MEMORY */
+ /* skip SORT */
+ if (sec_flags & SEC_LINK_ONCE)
+ styp_flags |= IMAGE_SCN_LNK_COMDAT;
+ /* skip LINK_DUPLICATES */
+ /* skip LINKER_CREATED */
+
+ /* For now, the read/write bits are mapped onto SEC_READONLY, even
+ though the semantics don't quite match. The bits from the input
+ are retained in pei_section_data(abfd, section)->pe_flags */
+
+ styp_flags |= IMAGE_SCN_MEM_READ; /* always readable. */
+ if ((sec_flags & SEC_READONLY) == 0)
+ styp_flags |= IMAGE_SCN_MEM_WRITE; /* Invert READONLY for write */
+ if (sec_flags & SEC_CODE)
+ styp_flags |= IMAGE_SCN_MEM_EXECUTE; /* CODE->EXECUTE */
if (sec_flags & SEC_SHARED)
- styp_flags |= IMAGE_SCN_MEM_SHARED;
-#endif
+ styp_flags |= IMAGE_SCN_MEM_SHARED; /* Shared remains meaningful */
- return (styp_flags);
+ return styp_flags;
}
-/*
- * Return a word with SEC_* flags set to represent the incoming
- * STYP_* flags (from scnhdr.s_flags). The inverse of this
- * function is sec_to_styp_flags().
- * NOTE: If you add to/change this routine, you should mirror the changes
- * in sec_to_styp_flags().
- */
+
+#endif /* COFF_WITH_PE */
+
+/* Return a word with SEC_* flags set to represent the incoming STYP_*
+ flags (from scnhdr.s_flags). The inverse of this function is
+ sec_to_styp_flags(). NOTE: If you add to/change this routine, you
+ should probably mirror the changes in sec_to_styp_flags(). */
+
+#ifndef COFF_WITH_PE
+
static flagword
-styp_to_sec_flags (abfd, hdr, name)
+styp_to_sec_flags (abfd, hdr, name, section)
bfd *abfd ATTRIBUTE_UNUSED;
PTR hdr;
const char *name;
+ asection *section ATTRIBUTE_UNUSED;
{
struct internal_scnhdr *internal_s = (struct internal_scnhdr *) hdr;
long styp_flags = internal_s->s_flags;
}
#endif /* STYP_SDATA */
-#ifdef COFF_WITH_PE
+#if defined (COFF_LONG_SECTION_NAMES) && defined (COFF_SUPPORT_GNU_LINKONCE)
+ /* As a GNU extension, if the name begins with .gnu.linkonce, we
+ only link a single copy of the section. This is used to support
+ g++. g++ will emit each template expansion in its own section.
+ The symbols will be defined as weak, so that multiple definitions
+ are permitted. The GNU linker extension is to actually discard
+ all but one of the sections. */
+ if (strncmp (name, ".gnu.linkonce", sizeof ".gnu.linkonce" - 1) == 0)
+ sec_flags |= SEC_LINK_ONCE | SEC_LINK_DUPLICATES_DISCARD;
+#endif
+
+ return sec_flags;
+}
+
+#else /* COFF_WITH_PE */
+
+/* The PE version; see above for the general comments.
+
+ Since to set the SEC_LINK_ONCE and associated flags, we have to
+ look at the symbol table anyway, we return the symbol table index
+ of the symbol being used as the COMDAT symbol. This is admittedly
+ ugly, but there's really nowhere else that we have access to the
+ required information. FIXME: Is the COMDAT symbol index used for
+ any purpose other than objdump? */
+
+static flagword
+styp_to_sec_flags (abfd, hdr, name, section)
+ bfd *abfd ATTRIBUTE_UNUSED;
+ PTR hdr;
+ const char *name;
+ asection *section;
+{
+ struct internal_scnhdr *internal_s = (struct internal_scnhdr *) hdr;
+ long styp_flags = internal_s->s_flags;
+ flagword sec_flags = 0;
+
+ if (styp_flags & STYP_DSECT)
+ abort (); /* Don't know what to do */
+#ifdef SEC_NEVER_LOAD
+ if (styp_flags & STYP_NOLOAD)
+ sec_flags |= SEC_NEVER_LOAD;
+#endif
+ if (styp_flags & STYP_GROUP)
+ abort (); /* Don't know what to do */
+ /* skip IMAGE_SCN_TYPE_NO_PAD */
+ if (styp_flags & STYP_COPY)
+ abort (); /* Don't know what to do */
+ if (styp_flags & IMAGE_SCN_CNT_CODE)
+ sec_flags |= SEC_CODE | SEC_ALLOC | SEC_LOAD;
+ if (styp_flags & IMAGE_SCN_CNT_INITIALIZED_DATA)
+ sec_flags |= SEC_DATA | SEC_ALLOC | SEC_LOAD;
+ if (styp_flags & IMAGE_SCN_CNT_UNINITIALIZED_DATA)
+ sec_flags |= SEC_ALLOC;
+ if (styp_flags & IMAGE_SCN_LNK_OTHER)
+ abort (); /* Don't know what to do */
+ if (styp_flags & IMAGE_SCN_LNK_INFO)
+ {
+ /* We mark these as SEC_DEBUGGING, but only if COFF_PAGE_SIZE is
+ defined. coff_compute_section_file_positions uses
+ COFF_PAGE_SIZE to ensure that the low order bits of the
+ section VMA and the file offset match. If we don't know
+ COFF_PAGE_SIZE, we can't ensure the correct correspondence,
+ and demand page loading of the file will fail. */
+#ifdef COFF_PAGE_SIZE
+ sec_flags |= SEC_DEBUGGING;
+#endif
+ }
+ if (styp_flags & STYP_OVER)
+ abort (); /* Don't know what to do */
if (styp_flags & IMAGE_SCN_LNK_REMOVE)
sec_flags |= SEC_EXCLUDE;
if (styp_flags & IMAGE_SCN_MEM_SHARED)
sec_flags |= SEC_SHARED;
-
+ /* COMDAT: see below */
+ if (styp_flags & IMAGE_SCN_MEM_DISCARDABLE)
+ sec_flags |= SEC_DEBUGGING;
+ if (styp_flags & IMAGE_SCN_MEM_NOT_CACHED)
+ abort ();/* Don't know what to do */
+ if (styp_flags & IMAGE_SCN_MEM_NOT_PAGED)
+ abort (); /* Don't know what to do */
+
+ /* We infer from the distinct read/write/execute bits the settings
+ of some of the bfd flags; the actual values, should we need them,
+ are also in pei_section_data (abfd, section)->pe_flags. */
+
+ if (styp_flags & IMAGE_SCN_MEM_EXECUTE)
+ sec_flags |= SEC_CODE; /* Probably redundant */
+ /* IMAGE_SCN_MEM_READ is simply ignored, assuming it always to be true. */
+ if ((styp_flags & IMAGE_SCN_MEM_WRITE) == 0)
+ sec_flags |= SEC_READONLY;
+
+ /* COMDAT gets very special treatment. */
if (styp_flags & IMAGE_SCN_LNK_COMDAT)
{
sec_flags |= SEC_LINK_ONCE;
/* COMDAT sections are special. The first symbol is the section
symbol, which tells what kind of COMDAT section it is. The
- *second* symbol is the "comdat symbol" - the one with the
+ second symbol is the "comdat symbol" - the one with the
unique name. GNU uses the section symbol for the unique
name; MS uses ".text" for every comdat section. Sigh. - DJ */
+ /* This is not mirrored in sec_to_styp_flags(), but there
+ doesn't seem to be a need to, either, and it would at best be
+ rather messy. */
+
if (_bfd_coff_get_external_symbols (abfd))
{
- bfd_byte *esym, *esymend;
+ bfd_byte *esymstart, *esym, *esymend;
- esym = (bfd_byte *) obj_coff_external_syms (abfd);
+ esymstart = esym = (bfd_byte *) obj_coff_external_syms (abfd);
esymend = esym + obj_raw_syment_count (abfd) * SYMESZ;
while (esym < esymend)
{
struct internal_syment isym;
+ char buf[SYMNMLEN + 1];
+ const char *symname;
bfd_coff_swap_sym_in (abfd, (PTR) esym, (PTR) &isym);
abort ();
}
- if (isym.n_sclass == C_STAT
+ /* The MS documentation is vague, but it appears to
+ require that n_sclass be C_STAT for both entries;
+ However, the Alpha compiler uses C_EXT for the one
+ with the "real" name, at least for string-pooled
+ constants. */
+ if (isym.n_scnum == section->target_index
+ && (isym.n_sclass == C_STAT || isym.n_sclass == C_EXT)
&& isym.n_type == T_NULL
- && isym.n_numaux == 1)
+ && isym.n_value == 0)
{
- char buf[SYMNMLEN + 1];
- const char *symname;
-
- symname = _bfd_coff_internal_syment_name (abfd, &isym, buf);
- if (symname == NULL)
- abort ();
-
- if (strcmp (name, symname) == 0)
+ /* The first TWO entries with the section # are both
+ of interest to us. The first one is the "section
+ symbol" (section name). The second is the comdat
+ symbol name. 'value' must be zero for it to
+ apply. Here, we've found a qualifying entry; we
+ distinguish the first from the second by numaux
+ (which should be 0 for the second). FIXME: We
+ should use the first one first rather than
+ counting on numaux. */
+ if (isym.n_numaux == 1)
{
union internal_auxent aux;
+ symname = _bfd_coff_internal_syment_name (abfd, &isym,
+ buf);
+ if (symname == NULL)
+ abort ();
+
+ if (strcmp (name, symname) != 0)
+ abort ();
+
/* This is the section symbol. */
bfd_coff_swap_aux_in (abfd, (PTR) (esym + SYMESZ),
the right thing, we are temporarily disabling
comdats for the MS types (they're used in
DLLs and C++, but we don't support *their*
- C++ libraries anyway - DJ */
+ C++ libraries anyway - DJ. */
switch (aux.x_scn.x_comdat)
{
case IMAGE_COMDAT_SELECT_NODUPLICATES:
-#if 0
+/* FIXME: This is bogus. It breaks cross-compilers. */
+#ifdef __INTERIX
sec_flags |= SEC_LINK_DUPLICATES_ONE_ONLY;
#else
sec_flags &= ~SEC_LINK_ONCE;
#endif
break;
- default:
case IMAGE_COMDAT_SELECT_ANY:
sec_flags |= SEC_LINK_DUPLICATES_DISCARD;
break;
break;
case IMAGE_COMDAT_SELECT_EXACT_MATCH:
+ /* Not yet fully implemented in the linker. */
sec_flags |= SEC_LINK_DUPLICATES_SAME_CONTENTS;
break;
case IMAGE_COMDAT_SELECT_ASSOCIATIVE:
-#if 0
+/* FIXME: This is bogus. It breaks cross-compilers. */
+#ifdef __INTERIX
/* FIXME: This is not currently implemented. */
sec_flags |= SEC_LINK_DUPLICATES_DISCARD;
#else
sec_flags &= ~SEC_LINK_ONCE;
#endif
break;
+
+ default:
+ /* FIXME: Shouldn't this be at least a
+ warning? */
+ sec_flags |= SEC_LINK_DUPLICATES_DISCARD;
+ break;
}
+ }
+ else
+ {
+ char *newname;
+
+ /* This should be the the second symbol with the
+ section #. It is the actual symbol name.
+ Intel puts the two adjacent, but Alpha (at
+ least) spreads them out. */
+
+ section->comdat =
+ bfd_alloc (abfd, sizeof (struct bfd_comdat_info));
+ if (section->comdat == NULL)
+ abort ();
+ section->comdat->symbol = (esym - esymstart) / SYMESZ;
+ symname = _bfd_coff_internal_syment_name (abfd, &isym,
+ buf);
+ if (symname == NULL)
+ abort ();
+
+ newname = bfd_alloc (abfd, strlen (symname) + 1);
+ if (newname == NULL)
+ abort ();
+ strcpy (newname, symname);
+ section->comdat->name = newname;
break;
}
}
}
}
-#endif
#if defined (COFF_LONG_SECTION_NAMES) && defined (COFF_SUPPORT_GNU_LINKONCE)
/* As a GNU extension, if the name begins with .gnu.linkonce, we
sec_flags |= SEC_LINK_ONCE | SEC_LINK_DUPLICATES_DISCARD;
#endif
- return (sec_flags);
+ return sec_flags;
}
+#endif /* COFF_WITH_PE */
+
#define get_index(symbol) ((symbol)->udata.i)
/*
. flagword (*_bfd_styp_to_sec_flags_hook) PARAMS ((
. bfd *abfd,
. PTR internal_scnhdr,
-. const char *name));
+. const char *name,
+. asection *section));
. void (*_bfd_set_alignment_hook) PARAMS ((
. bfd *abfd,
. asection *sec,
.#define bfd_coff_mkobject_hook(abfd, filehdr, aouthdr)\
. ((coff_backend_info (abfd)->_bfd_coff_mkobject_hook) (abfd, filehdr, aouthdr))
.
-.#define bfd_coff_styp_to_sec_flags_hook(abfd, scnhdr, name)\
-. ((coff_backend_info (abfd)->_bfd_styp_to_sec_flags_hook) (abfd, scnhdr, name))
+.#define bfd_coff_styp_to_sec_flags_hook(abfd, scnhdr, name, section)\
+. ((coff_backend_info (abfd)->_bfd_styp_to_sec_flags_hook)\
+. (abfd, scnhdr, name, section))
.
.#define bfd_coff_set_alignment_hook(abfd, sec, scnhdr)\
. ((coff_backend_info (abfd)->_bfd_set_alignment_hook) (abfd, sec, scnhdr))
projects / external / binutils.git / commitdiff