powerpc: P1025: Remove macro CONFIG_P1025

Replace CONFIG_P1025 with ARCH_P1025 in Kconfig and clean up
existing macros.

Signed-off-by: York Sun <york.sun@nxp.com>

diff --git a/arch/powerpc/cpu/mpc85xx/Kconfig b/arch/powerpc/cpu/mpc85xx/Kconfig
index 62c0dec..90777db 100644 (file)
--- a/arch/powerpc/cpu/mpc85xx/Kconfig
+++ b/arch/powerpc/cpu/mpc85xx/Kconfig
@@ -156,6 +156,7 @@ config TARGET_P1025RDB
        bool "Support P1025RDB"
        select SUPPORT_SPL
        select SUPPORT_TPL
+       select ARCH_P1025
 
 config TARGET_P2020RDB
        bool "Support P2020RDB-PC"
@@ -164,6 +165,7 @@ config TARGET_P2020RDB
 
 config TARGET_P1_TWR
        bool "Support p1_twr"
+       select ARCH_P1025
 
 config TARGET_P2041RDB
        bool "Support P2041RDB"
@@ -301,6 +303,9 @@ config ARCH_P1023
 config ARCH_P1024
        bool
 
+config ARCH_P1025
+       bool
+
 source "board/freescale/b4860qds/Kconfig"
 source "board/freescale/bsc9131rdb/Kconfig"
 source "board/freescale/bsc9132qds/Kconfig"

diff --git a/arch/powerpc/cpu/mpc85xx/Makefile b/arch/powerpc/cpu/mpc85xx/Makefile
index 239cf41..a3fba03 100644 (file)
--- a/arch/powerpc/cpu/mpc85xx/Makefile
+++ b/arch/powerpc/cpu/mpc85xx/Makefile
@@ -79,7 +79,7 @@ obj-$(CONFIG_ARCH_P1021)      += p1021_serdes.o
 obj-$(CONFIG_ARCH_P1022)       += p1022_serdes.o
 obj-$(CONFIG_ARCH_P1023)       += p1023_serdes.o
 obj-$(CONFIG_ARCH_P1024)       += p1021_serdes.o
-obj-$(CONFIG_P1025)    += p1021_serdes.o
+obj-$(CONFIG_ARCH_P1025)       += p1021_serdes.o
 obj-$(CONFIG_P2010)    += p2020_serdes.o
 obj-$(CONFIG_P2020)    += p2020_serdes.o
 obj-$(CONFIG_PPC_P2041) += p2041_serdes.o

diff --git a/arch/powerpc/cpu/mpc85xx/speed.c b/arch/powerpc/cpu/mpc85xx/speed.c
index 8155620..38a28a8 100644 (file)
--- a/arch/powerpc/cpu/mpc85xx/speed.c
+++ b/arch/powerpc/cpu/mpc85xx/speed.c
@@ -596,7 +596,7 @@ void get_sys_info(sys_info_t *sys_info)
 #endif
 
 #ifdef CONFIG_QE
-#if defined(CONFIG_ARCH_P1021) || defined(CONFIG_P1025)
+#if defined(CONFIG_ARCH_P1021) || defined(CONFIG_ARCH_P1025)
        sys_info->freq_qe =  sys_info->freq_systembus;
 #else
        qe_ratio = ((gur->porpllsr) & MPC85xx_PORPLLSR_QE_RATIO)

diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h
index dffc222..6874b54 100644 (file)
--- a/arch/powerpc/include/asm/config_mpc85xx.h
+++ b/arch/powerpc/include/asm/config_mpc85xx.h
@@ -265,7 +265,7 @@
 #define CONFIG_SYS_FSL_ERRATUM_A005125
 
 /* P1025 is lower end variant of P1021 */
-#elif defined(CONFIG_P1025)
+#elif defined(CONFIG_ARCH_P1025)
 #define CONFIG_MAX_CPUS                        2
 #define CONFIG_SYS_FSL_NUM_LAWS                12
 #define CONFIG_USB_MAX_CONTROLLER_COUNT        1

diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h
index b0f81ec..f8a6a78 100644 (file)
--- a/arch/powerpc/include/asm/immap_85xx.h
+++ b/arch/powerpc/include/asm/immap_85xx.h
@@ -2488,7 +2488,7 @@ typedef struct ccsr_gur {
        u8      res11a[76];
        par_io_t qe_par_io[7];
        u8      res11b[1600];
-#elif defined(CONFIG_ARCH_P1021) || defined(CONFIG_P1025)
+#elif defined(CONFIG_ARCH_P1021) || defined(CONFIG_ARCH_P1025)
        u8      res11a[12];
        u32     iovselsr;
        u8      res11b[60];

diff --git a/drivers/qe/uec.c b/drivers/qe/uec.c
index 2bb630d..b3af707 100644 (file)
--- a/drivers/qe/uec.c
+++ b/drivers/qe/uec.c
@@ -567,7 +567,7 @@ static void phy_change(struct eth_device *dev)
 {
        uec_private_t   *uec = (uec_private_t *)dev->priv;
 
-#if defined(CONFIG_ARCH_P1021) || defined(CONFIG_P1025)
+#if defined(CONFIG_ARCH_P1021) || defined(CONFIG_ARCH_P1025)
        ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
 
        /* QE9 and QE12 need to be set for enabling QE MII managment signals */
@@ -578,7 +578,7 @@ static void phy_change(struct eth_device *dev)
        /* Update the link, speed, duplex */
        uec->mii_info->phyinfo->read_status(uec->mii_info);
 
-#if defined(CONFIG_ARCH_P1021) || defined(CONFIG_P1025)
+#if defined(CONFIG_ARCH_P1021) || defined(CONFIG_ARCH_P1025)
        /*
         * QE12 is muxed with LBCTL, it needs to be released for enabling
         * LBCTL signal for LBC usage.
@@ -1193,14 +1193,14 @@ static int uec_init(struct eth_device* dev, bd_t *bd)
        uec_private_t           *uec;
        int                     err, i;
        struct phy_info         *curphy;
-#if defined(CONFIG_ARCH_P1021) || defined(CONFIG_P1025)
+#if defined(CONFIG_ARCH_P1021) || defined(CONFIG_ARCH_P1025)
        ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
 #endif
 
        uec = (uec_private_t *)dev->priv;
 
        if (uec->the_first_run == 0) {
-#if defined(CONFIG_ARCH_P1021) || defined(CONFIG_P1025)
+#if defined(CONFIG_ARCH_P1021) || defined(CONFIG_ARCH_P1025)
        /* QE9 and QE12 need to be set for enabling QE MII managment signals */
        setbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_QE9);
        setbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_QE12);
@@ -1232,7 +1232,7 @@ static int uec_init(struct eth_device* dev, bd_t *bd)
                        udelay(100000);
                } while (1);
 
-#if defined(CONFIG_ARCH_P1021) || defined(CONFIG_P1025)
+#if defined(CONFIG_ARCH_P1021) || defined(CONFIG_ARCH_P1025)
                /* QE12 needs to be released for enabling LBCTL signal*/
                clrbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_QE12);
 #endif

diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h
index 119bd10..3320a7e 100644 (file)
--- a/include/configs/p1_p2_rdb_pc.h
+++ b/include/configs/p1_p2_rdb_pc.h
@@ -128,7 +128,6 @@
 #if defined(CONFIG_TARGET_P1025RDB)
 #define CONFIG_BOARDNAME "P1025RDB"
 #define CONFIG_NAND_FSL_ELBC
-#define CONFIG_P1025
 #define CONFIG_QE
 #define CONFIG_SLIC
 

diff --git a/include/configs/p1_twr.h b/include/configs/p1_twr.h
index ef32181..c122f8e 100644 (file)
--- a/include/configs/p1_twr.h
+++ b/include/configs/p1_twr.h
@@ -12,7 +12,6 @@
 
 #if defined(CONFIG_TWR_P1025)
 #define CONFIG_BOARDNAME "TWR-P1025"
-#define CONFIG_P1025
 #define CONFIG_PHY_ATHEROS
 #define CONFIG_QE
 #define CONFIG_SYS_LBC_LBCR    0x00080000      /* Conversion of LBC addr */

diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index 44376ab..e4dcd0b 100644 (file)
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -3383,7 +3383,6 @@ CONFIG_OS2_ENV_ADDR
 CONFIG_OS_ENV_ADDR
 CONFIG_OTHBOOTARGS
 CONFIG_OVERWRITE_ETHADDR_ONCE
-CONFIG_P1025
 CONFIG_P2020
 CONFIG_P2041RDB
 CONFIG_P3041DS