static struct type *mdebug_type_float_dec;
static struct type *mdebug_type_string;
+/* Types for symbols from files compiled without debugging info. */
+
+static struct type *nodebug_func_symbol_type;
+static struct type *nodebug_var_symbol_type;
+
+/* Nonzero if we have seen ecoff debugging info for a file. */
+
+static int found_ecoff_debugging_info;
+
/* Forward declarations */
static int
SYMBOL_CLASS (s) = class;
add_symbol (s, b);
- /* Type could be missing in a number of cases */
- if (sh->sc == scUndefined || sh->sc == scNil)
- SYMBOL_TYPE (s) = builtin_type_int; /* undefined? */
+ /* Type could be missing if file is compiled without debugging info. */
+ if (sh->sc == scUndefined || sh->sc == scNil || sh->index == indexNil)
+ SYMBOL_TYPE (s) = nodebug_var_symbol_type;
else
SYMBOL_TYPE (s) = parse_type (cur_fd, ax, sh->index, 0, bigend, name);
/* Value of a data symbol is its memory address */
case stParam: /* arg to procedure, goes into current block */
max_gdbinfo++;
+ found_ecoff_debugging_info = 1;
top_stack->numargs++;
/* Special GNU C++ name. */
unknown-type blocks of info about structured data. `type_code'
has been set to the proper TYPE_CODE, if we know it. */
structured_common:
+ found_ecoff_debugging_info = 1;
push_parse_stack ();
top_stack->blocktype = stBlock;
}
case_stBlock_code:
+ found_ecoff_debugging_info = 1;
/* beginnning of (code) block. Value of symbol
is the displacement from procedure start */
push_parse_stack ();
break;
case stTypedef: /* type definition */
+ found_ecoff_debugging_info = 1;
+
/* Typedefs for forward declarations and opaque structs from alpha cc
are handled by cross_ref, skip them. */
if (sh->iss == 0)
e->pdr.regoffset = -4;
}
}
+
+ /* It would be reasonable that functions that have been compiled
+ without debugging info have a btNil type for their return value,
+ and functions that are void and are compiled with debugging info
+ have btVoid.
+ gcc and DEC f77 put out btNil types for both cases, so btNil is mapped
+ to TYPE_CODE_VOID in parse_type to get the `compiled with debugging info'
+ case right.
+ The glevel field in cur_fdr could be used to determine the presence
+ of debugging info, but GCC doesn't always pass the -g switch settings
+ to the assembler and GAS doesn't set the glevel field from the -g switch
+ settings.
+ To work around these problems, the return value type of a TYPE_CODE_VOID
+ function is adjusted accordingly if no debugging info was found in the
+ compilation unit. */
+
+ if (processing_gcc_compilation == 0
+ && found_ecoff_debugging_info == 0
+ && TYPE_CODE (TYPE_TARGET_TYPE (SYMBOL_TYPE (s))) == TYPE_CODE_VOID)
+ SYMBOL_TYPE (s) = nodebug_func_symbol_type;
}
/* Relocate the extra function info pointed to by the symbol table. */
top_stack->cur_type = 0;
top_stack->procadr = 0;
top_stack->numargs = 0;
+ found_ecoff_debugging_info = 0;
if (fh)
{
TARGET_DOUBLE_BIT / TARGET_CHAR_BIT,
0, "floating decimal",
(struct objfile *) NULL);
+
+ nodebug_func_symbol_type = init_type (TYPE_CODE_FUNC, 1, 0,
+ "<function, no debug info>", NULL);
+ TYPE_TARGET_TYPE (nodebug_func_symbol_type) = builtin_type_int;
+ nodebug_var_symbol_type =
+ init_type (TYPE_CODE_INT, TARGET_INT_BIT / HOST_CHAR_BIT, 0,
+ "<variable, no debug info>", NULL);
}
/* List lines of source files for GDB, the GNU debugger.
- Copyright 1986, 1987, 1988, 1989, 1991, 1992, 1993, 1994
+ Copyright 1986, 1987, 1988, 1989, 1991, 1992, 1993, 1994, 1995
Free Software Foundation, Inc.
This file is part of GDB.
#include "symfile.h"
#include "objfiles.h"
#include "annotate.h"
+#include "gdbtypes.h"
#ifndef DIRNAME_SEPARATOR
#define DIRNAME_SEPARATOR ':'
}
/* start-sanitize-mpw */
#ifdef MPW
- if (1) {
- printf("openp on %s, path %s mode %d prot %d\n returned %d",
- string, path, mode, prot, fd);
- if (*filename_opened)
- printf(" (filename is %s)", *filename_opened);
- printf("\n");
+ /* This is a debugging hack that can go away when all combinations
+ of Mac and Unix names are handled reasonably. */
+ {
+ extern int debug_openp;
+
+ if (debug_openp)
+ {
+ printf("openp on %s, path %s mode %d prot %d\n returned %d",
+ string, path, mode, prot, fd);
+ if (*filename_opened)
+ printf(" (filename is %s)", *filename_opened);
+ printf("\n");
+ }
}
#endif
/* end-sanitize-mpw */
if (p != s->filename)
result = openp (path, 0, p, O_RDONLY, 0, &s->fullname);
}
-#endif
+#endif /* MPW */
/* end-sanitize-mpw */
if (result >= 0)
{
{
sal.symtab = current_source_symtab;
sal.line = last_line_listed;
+ sal.pc = 0;
sals.nelts = 1;
sals.sals = (struct symtab_and_line *)
xmalloc (sizeof (struct symtab_and_line));
/* Match! */
fclose (stream);
print_source_lines (current_source_symtab, line, line+1, 0);
+ set_internalvar (lookup_internalvar ("_"),
+ value_from_longest (builtin_type_int,
+ (LONGEST) line));
current_source_line = max (line - lines_to_list / 2, 1);
return;
}
fclose (stream);
print_source_lines (current_source_symtab,
line, line+1, 0);
+ set_internalvar (lookup_internalvar ("_"),
+ value_from_longest (builtin_type_int,
+ (LONGEST) line));
current_source_line = max (line - lines_to_list / 2, 1);
return;
}
add_info ("source", source_info,
"Information about the current source file.");
-/* start-sanitize-mpw */
-#ifndef MPW_C
-/* end-sanitize-mpw */
add_info ("line", line_info,
- "Core addresses of the code for a source line.\n\
+ concat ("Core addresses of the code for a source line.\n\
Line can be specified as\n\
LINENUM, to list around that line in current file,\n\
FILE:LINENUM, to list around that line in that file,\n\
FUNCTION, to list around beginning of that function,\n\
FILE:FUNCTION, to distinguish among like-named static functions.\n\
+", "\
Default is to describe the last source line that was listed.\n\n\
This sets the default address for \"x\" to the line's first instruction\n\
so that \"x/i\" suffices to start examining the machine code.\n\
-The address is also stored as the value of \"$_\".");
-/* start-sanitize-mpw */
-#else
- add_info ("line", line_info,
- "Core addresses of the code for a source line. \n\
-Line can be specified as \n\
- LINENUM, to list around that line in current file, \n\
- FILE:LINENUM, to list around that line in that file, \n\
-Default is to describe the last source line that was listed. \n\n\
-The address is also stored as the value of \"$_\". ");
-#endif
-/* end-sanitize-mpw */
+The address is also stored as the value of \"$_\".", NULL));
add_com ("forward-search", class_files, forward_search_command,
- "Search for regular expression (see regex(3)) from last line listed.");
+ "Search for regular expression (see regex(3)) from last line listed.\n\
+The matching line number is also stored as the value of \"$_\".");
add_com_alias ("search", "forward-search", class_files, 0);
add_com ("reverse-search", class_files, reverse_search_command,
- "Search backward for regular expression (see regex(3)) from last line listed.");
+ "Search backward for regular expression (see regex(3)) from last line listed.\n\
+The matching line number is also stored as the value of \"$_\".");
-/* start-sanitize-mpw */
-#ifndef MPW_C
-/* end-sanitize-mpw */
add_com ("list", class_files, list_command,
- "List specified function or line.\n\
+ concat ("List specified function or line.\n\
With no argument, lists ten more lines after or around previous listing.\n\
\"list -\" lists the ten lines before a previous ten-line listing.\n\
One argument specifies a line, and ten lines are listed around that line.\n\
Two arguments with comma between specify starting and ending lines to list.\n\
+", "\
Lines can be specified in these ways:\n\
LINENUM, to list around that line in current file,\n\
FILE:LINENUM, to list around that line in that file,\n\
FUNCTION, to list around beginning of that function,\n\
FILE:FUNCTION, to distinguish among like-named static functions.\n\
*ADDRESS, to list around the line containing that address.\n\
-With two args if one is empty it stands for ten lines away from the other arg.");
-/* start-sanitize-mpw */
-#else /* MPW_C */
- add_com ("list", class_files, list_command,
- "List specified function or line.\n\
-With no argument, lists ten more lines after or around previous listing. \n\
-One argument specifies a line, and ten lines are listed around that line. \n\
-Two arguments with comma between specify starting and ending lines to list. \n\
-Lines can be specified in these ways:\n\
-With two args if one is empty it stands for ten lines away from the other arg. ");
-#endif /* MPW_C */
-/* end-sanitize-mpw */
+With two args if one is empty it stands for ten lines away from the other arg.", NULL));
+
add_com_alias ("l", "list", class_files, 1);
add_show_from_set
projects / external / binutils.git / commitdiff