}
#ifdef CONFIG_PM
- static int s5pv310_cpufreq_suspend(struct cpufreq_policy *policy)
-static int exynos4_cpufreq_suspend(struct cpufreq_policy *policy,
- pm_message_t pmsg)
++static int exynos4_cpufreq_suspend(struct cpufreq_policy *policy)
{
return 0;
}
}
static struct irq_chip gpio_irq_chip = {
- .ack = mxs_gpio_ack_irq,
- .mask = mxs_gpio_mask_irq,
- .unmask = mxs_gpio_unmask_irq,
- .set_type = mxs_gpio_set_irq_type,
- .set_wake = mxs_gpio_set_wake_irq,
+ .name = "mxs gpio",
+ .irq_ack = mxs_gpio_ack_irq,
+ .irq_mask = mxs_gpio_mask_irq,
+ .irq_unmask = mxs_gpio_unmask_irq,
+ .irq_set_type = mxs_gpio_set_irq_type,
+ .irq_set_wake = mxs_gpio_set_wake_irq,
};
static void mxs_set_gpio_direction(struct gpio_chip *chip, unsigned offset,
which is an IOH(Input/Output Hub) for x86 embedded processor.
Enabling PCH_DMA, this PCH UART works as DMA mode.
+ This driver also can be used for OKI SEMICONDUCTOR ML7213 IOH(Input/
+ Output Hub) which is for IVI(In-Vehicle Infotainment) use.
+ ML7213 is companion chip for Intel Atom E6xx series.
+ ML7213 is completely compatible for Intel EG20T PCH.
+
+config SERIAL_MSM_SMD
+ bool "Enable tty device interface for some SMD ports"
+ default n
+ depends on MSM_SMD
+ help
+ Enables userspace clients to read and write to some streaming SMD
+ ports via tty device interface for MSM chipset.
+
+ config SERIAL_MXS_AUART
+ depends on ARCH_MXS
+ tristate "MXS AUART support"
+ select SERIAL_CORE
+ help
+ This driver supports the MXS Application UART (AUART) port.
+
+ config SERIAL_MXS_AUART_CONSOLE
+ bool "MXS AUART console support"
+ depends on SERIAL_MXS_AUART=y
+ select SERIAL_CORE_CONSOLE
+ help
+ Enable a MXS AUART port to be the system console.
+
endmenu
obj-$(CONFIG_SERIAL_MFD_HSU) += mfd.o
obj-$(CONFIG_SERIAL_IFX6X60) += ifx6x60.o
obj-$(CONFIG_SERIAL_PCH_UART) += pch_uart.o
+obj-$(CONFIG_SERIAL_MSM_SMD) += msm_smd_tty.o
+ obj-$(CONFIG_SERIAL_MXS_AUART) += mxs-auart.o
help
Framebuffer support for the JZ4740 SoC.
+ config FB_MXS
+ tristate "MXS LCD framebuffer support"
+ depends on FB && ARCH_MXS
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ Framebuffer support for the MXS SoC.
+
+config FB_PUV3_UNIGFX
+ tristate "PKUnity v3 Unigfx framebuffer support"
+ depends on FB && UNICORE32 && ARCH_PUV3
+ select FB_SYS_FILLRECT
+ select FB_SYS_COPYAREA
+ select FB_SYS_IMAGEBLIT
+ select FB_SYS_FOPS
+ help
+ Choose this option if you want to use the Unigfx device as a
+ framebuffer device. Without the support of PCI & AGP.
+
source "drivers/video/omap/Kconfig"
source "drivers/video/omap2/Kconfig"