sata_mv: cosmetic preparations for IRQ coalescing

Various cosmetic changes in preparation for the IRQ coalescing feature.

Note that the various MV_IRQ_COAL_* definitions are restored/renamed
in the folloup patch which adds IRQ coalescing to the driver.

Signed-off-by: Mark Lord <mlord@pobox.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 8cad3b2..206220e 100644 (file)
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -1,10 +1,13 @@
 /*
  * sata_mv.c - Marvell SATA support
  *
- * Copyright 2008: Marvell Corporation, all rights reserved.
+ * Copyright 2008-2009: Marvell Corporation, all rights reserved.
  * Copyright 2005: EMC Corporation, all rights reserved.
  * Copyright 2005 Red Hat, Inc.  All rights reserved.
  *
+ * Originally written by Brett Russ.
+ * Extensive overhaul and enhancement by Mark Lord <mlord@pobox.com>.
+ *
  * Please ALWAYS copy linux-ide@vger.kernel.org on emails.
  *
  * This program is free software; you can redistribute it and/or modify
@@ -25,8 +28,6 @@
 /*
  * sata_mv TODO list:
  *
- * --> Errata workaround for NCQ device errors.
- *
  * --> More errata workarounds for PCI-X.
  *
  * --> Complete a full errata audit for all chipsets to identify others.
@@ -68,6 +69,16 @@
 #define DRV_NAME       "sata_mv"
 #define DRV_VERSION    "1.26"
 
+/*
+ * module options
+ */
+
+static int msi;
+#ifdef CONFIG_PCI
+module_param(msi, int, S_IRUGO);
+MODULE_PARM_DESC(msi, "Enable use of PCI MSI (0=off, 1=on)");
+#endif
+
 enum {
        /* BAR's are enumerated in terms of pci_resource_start() terms */
        MV_PRIMARY_BAR          = 0,    /* offset 0x10: memory space */
@@ -78,12 +89,6 @@ enum {
        MV_MINOR_REG_AREA_SZ    = 0x2000,       /* 8KB */
 
        MV_PCI_REG_BASE         = 0,
-       MV_IRQ_COAL_REG_BASE    = 0x18000,      /* 6xxx part only */
-       MV_IRQ_COAL_CAUSE               = (MV_IRQ_COAL_REG_BASE + 0x08),
-       MV_IRQ_COAL_CAUSE_LO            = (MV_IRQ_COAL_REG_BASE + 0x88),
-       MV_IRQ_COAL_CAUSE_HI            = (MV_IRQ_COAL_REG_BASE + 0x8c),
-       MV_IRQ_COAL_THRESHOLD           = (MV_IRQ_COAL_REG_BASE + 0xcc),
-       MV_IRQ_COAL_TIME_THRESHOLD      = (MV_IRQ_COAL_REG_BASE + 0xd0),
 
        MV_SATAHC0_REG_BASE     = 0x20000,
        MV_FLASH_CTL_OFS        = 0x1046c,
@@ -115,16 +120,14 @@ enum {
 
        /* Host Flags */
        MV_FLAG_DUAL_HC         = (1 << 30),  /* two SATA Host Controllers */
-       MV_FLAG_IRQ_COALESCE    = (1 << 29),  /* IRQ coalescing capability */
 
        MV_COMMON_FLAGS         = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
                                  ATA_FLAG_MMIO | ATA_FLAG_PIO_POLLING,
 
        MV_GEN_I_FLAGS          = MV_COMMON_FLAGS | ATA_FLAG_NO_ATAPI,
 
-       MV_GEN_II_FLAGS         = MV_COMMON_FLAGS | MV_FLAG_IRQ_COALESCE |
-                                 ATA_FLAG_PMP | ATA_FLAG_ACPI_SATA |
-                                 ATA_FLAG_NCQ,
+       MV_GEN_II_FLAGS         = MV_COMMON_FLAGS | ATA_FLAG_NCQ |
+                                 ATA_FLAG_PMP | ATA_FLAG_ACPI_SATA,
 
        MV_GEN_IIE_FLAGS        = MV_GEN_II_FLAGS | ATA_FLAG_AN,
 
@@ -179,16 +182,16 @@ enum {
        PCI_HC_MAIN_IRQ_MASK_OFS  = 0x1d64,
        SOC_HC_MAIN_IRQ_CAUSE_OFS = 0x20020,
        SOC_HC_MAIN_IRQ_MASK_OFS  = 0x20024,
-       ERR_IRQ                 = (1 << 0),     /* shift by port # */
-       DONE_IRQ                = (1 << 1),     /* shift by port # */
+       ERR_IRQ                 = (1 << 0),     /* shift by (2 * port #) */
+       DONE_IRQ                = (1 << 1),     /* shift by (2 * port #) */
        HC0_IRQ_PEND            = 0x1ff,        /* bits 0-8 = HC0's ports */
        HC_SHIFT                = 9,            /* bits 9-17 = HC1's ports */
        PCI_ERR                 = (1 << 18),
-       TRAN_LO_DONE            = (1 << 19),    /* 6xxx: IRQ coalescing */
-       TRAN_HI_DONE            = (1 << 20),    /* 6xxx: IRQ coalescing */
-       PORTS_0_3_COAL_DONE     = (1 << 8),
-       PORTS_4_7_COAL_DONE     = (1 << 17),
-       PORTS_0_7_COAL_DONE     = (1 << 21),    /* 6xxx: IRQ coalescing */
+       TRAN_COAL_LO_DONE       = (1 << 19),    /* transaction coalescing */
+       TRAN_COAL_HI_DONE       = (1 << 20),    /* transaction coalescing */
+       PORTS_0_3_COAL_DONE     = (1 << 8),     /* HC0 IRQ coalescing */
+       PORTS_4_7_COAL_DONE     = (1 << 17),    /* HC1 IRQ coalescing */
+       ALL_PORTS_COAL_DONE     = (1 << 21),    /* GEN_II(E) IRQ coalescing */
        GPIO_INT                = (1 << 22),
        SELF_INT                = (1 << 23),
        TWSI_INT                = (1 << 24),
@@ -621,7 +624,7 @@ static struct ata_port_operations mv6_ops = {
        .softreset              = mv_softreset,
        .error_handler          = mv_pmp_error_handler,
 
-       .sff_check_status       = mv_sff_check_status,
+       .sff_check_status       = mv_sff_check_status,
        .sff_irq_clear          = mv_sff_irq_clear,
        .check_atapi_dma        = mv_check_atapi_dma,
        .bmdma_setup            = mv_bmdma_setup,
@@ -1255,8 +1258,8 @@ static void mv_60x1_errata_sata25(struct ata_port *ap, int want_ncq)
 }
 
 /**
- *     mv_bmdma_enable - set a magic bit on GEN_IIE to allow bmdma
- *     @ap: Port being initialized
+ *     mv_bmdma_enable - set a magic bit on GEN_IIE to allow bmdma
+ *     @ap: Port being initialized
  *
  *     There are two DMA modes on these chips:  basic DMA, and EDMA.
  *
@@ -2000,7 +2003,7 @@ static unsigned int mv_qc_issue(struct ata_queued_cmd *qc)
                struct mv_host_priv *hpriv = ap->host->private_data;
                /*
                 * Workaround for 88SX60x1 FEr SATA#25 (part 2).
-                * 
+                *
                 * After any NCQ error, the READ_LOG_EXT command
                 * from libata-eh *must* use mv_qc_issue_fis().
                 * Otherwise it might fail, due to chip errata.
@@ -3704,12 +3707,6 @@ static struct pci_driver mv_pci_driver = {
        .remove                 = ata_pci_remove_one,
 };
 
-/*
- * module options
- */
-static int msi;              /* Use PCI msi; either zero (off, default) or non-zero */
-
-
 /* move to PCI layer or libata core? */
 static int pci_go_64(struct pci_dev *pdev)
 {
@@ -3891,10 +3888,5 @@ MODULE_DEVICE_TABLE(pci, mv_pci_tbl);
 MODULE_VERSION(DRV_VERSION);
 MODULE_ALIAS("platform:" DRV_NAME);
 
-#ifdef CONFIG_PCI
-module_param(msi, int, 0444);
-MODULE_PARM_DESC(msi, "Enable use of PCI MSI (0=off, 1=on)");
-#endif
-
 module_init(mv_init);
 module_exit(mv_exit);