% Load plain if necessary, i.e., if running under initex.
\expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi
%
-\def\texinfoversion{1999-01-29}%
+\def\texinfoversion{1999-02-21.16}%
%
% Copyright (C) 1985, 86, 88, 90, 91, 92, 93, 94, 95, 96, 97, 98, 99
% Free Software Foundation, Inc.
% Please try the latest version of texinfo.tex before submitting bug
% reports; you can get the latest version from:
% ftp://ftp.gnu.org/pub/gnu/texinfo.tex
-% /home/gd/gnu/doc/texinfo.tex on the GNU machines.
% (and all GNU mirrors, see http://www.gnu.org/order/ftp.html)
% ftp://tug.org/tex/texinfo.tex
% ftp://ctan.org/macros/texinfo/texinfo.tex
% (and all CTAN mirrors, finger ctan@ctan.org for a list).
-% The texinfo.tex in the texinfo distribution itself could well be out
+% /home/gd/gnu/doc/texinfo.tex on the GNU machines.
+% The texinfo.tex in any given Texinfo distribution could well be out
% of date, so if that's what you're using, please check.
+% There is a small home page for Texinfo at http://texinfo.org/.
%
-% Send bug reports to bug-texinfo@gnu.org.
-% Please include a precise test case in each bug report,
-% including a complete document with which we can reproduce the problem.
+% Send bug reports to bug-texinfo@gnu.org. Please include including a
+% complete document in each bug report with which we can reproduce the
+% problem. Patches are, of course, greatly appreciated.
%
% To process a Texinfo manual with TeX, it's most reliable to use the
-% texi2dvi shell script that comes with the distribution. For simple
-% manuals, however, you can get away with:
+% texi2dvi shell script that comes with the distribution. For a simple
+% manual foo.texi, however, you can get away with this:
% tex foo.texi
% texindex foo.??
% tex foo.texi
% tex foo.texi
-% dvips foo.dvi -o # or whatever, to process the dvi file.
+% dvips foo.dvi -o # or whatever, to process the dvi file; this makes foo.ps.
% The extra runs of TeX get the cross-reference information correct.
% Sometimes one run after texindex suffices, and sometimes you need more
% than two; texi2dvi does it as many times as necessary.
+%
+% It is possible to adapt texinfo.tex for other languages. You can get
+% the existing language-specific files from ftp://ftp.gnu.org/gnu/texinfo/.
\message{Loading texinfo [version \texinfoversion]:}
\newlinechar = `^^J
% Set up fixed words for English if not already set.
-\ifx\putwordAppendix\undefined \gdef\putwordAppendix{Appendix}\fi
+\ifx\putwordAppendix\undefined \gdef\putwordAppendix{Appendix}\fi
\ifx\putwordChapter\undefined \gdef\putwordChapter{Chapter}\fi
\ifx\putwordfile\undefined \gdef\putwordfile{file}\fi
\ifx\putwordIndexIsEmpty\undefined \gdef\putwordIndexIsEmpty{(Index is empty)}\fi
\ifx\putwordIndexNonexistent\undefined \gdef\putwordIndexNonexistent{(Index is nonexistent)}\fi
\ifx\putwordInfo\undefined \gdef\putwordInfo{Info}\fi
\ifx\putwordMethodon\undefined \gdef\putwordMethodon{Method on}\fi
-\ifx\putwordNoTitle\undefined \gdef\putwordNoTitle{No Title}\fi
-\ifx\putwordOf\undefined \gdef\putwordOf{of}\fi
+\ifx\putwordNoTitle\undefined \gdef\putwordNoTitle{No Title}\fi
+\ifx\putwordof\undefined \gdef\putwordof{of}\fi
\ifx\putwordon\undefined \gdef\putwordon{on}\fi
\ifx\putwordpage\undefined \gdef\putwordpage{page}\fi
\ifx\putwordsection\undefined \gdef\putwordsection{section}\fi
\ifx\putwordSection\undefined \gdef\putwordSection{Section}\fi
\ifx\putwordsee\undefined \gdef\putwordsee{see}\fi
\ifx\putwordSee\undefined \gdef\putwordSee{See}\fi
-\ifx\putwordShortTOC\undefined \gdef\putwordShortTOC{Short Contents}\fi
-\ifx\putwordTOC\undefined \gdef\putwordTOC{Table of Contents}\fi
+\ifx\putwordShortTOC\undefined \gdef\putwordShortTOC{Short Contents}\fi
+\ifx\putwordTOC\undefined \gdef\putwordTOC{Table of Contents}\fi
%
\ifx\putwordMJan\undefined \gdef\putwordMJan{January}\fi
\ifx\putwordMFeb\undefined \gdef\putwordMFeb{February}\fi
\ifx\putwordMMar\undefined \gdef\putwordMMar{March}\fi
\ifx\putwordMApr\undefined \gdef\putwordMApr{April}\fi
-\ifx\putwordMMai\undefined \gdef\putwordMMai{May}\fi
+\ifx\putwordMMay\undefined \gdef\putwordMMay{May}\fi
\ifx\putwordMJun\undefined \gdef\putwordMJun{June}\fi
\ifx\putwordMJul\undefined \gdef\putwordMJul{July}\fi
\ifx\putwordMAug\undefined \gdef\putwordMAug{August}\fi
\ifx\putwordMNov\undefined \gdef\putwordMNov{November}\fi
\ifx\putwordMDec\undefined \gdef\putwordMDec{December}\fi
%
-\ifx\putwordDefmac\undefined \gdef\putwordDefmac{Macro}\fi
-\ifx\putwordDefspec\undefined \gdef\putwordDefspec{Special Form}\fi
-\ifx\putwordDefivar\undefined \gdef\putwordDefivar{Instance Variable}\fi
-\ifx\putwordDefvar\undefined \gdef\putwordDefvar{Variable}\fi
-\ifx\putwordDefopt\undefined \gdef\putwordDefopt{User Option}\fi
-\ifx\putwordDeftypevar\undefined \gdef\putwordDeftypevar{Variable}\fi
-\ifx\putwordDeffunc\undefined \gdef\putwordDeffunc{Function}\fi
-\ifx\putwordDeftypefun\undefined \gdef\putwordDeftypefun{Function}\fi
+\ifx\putwordDefmac\undefined \gdef\putwordDefmac{Macro}\fi
+\ifx\putwordDefspec\undefined \gdef\putwordDefspec{Special Form}\fi
+\ifx\putwordDefivar\undefined \gdef\putwordDefivar{Instance Variable}\fi
+\ifx\putwordDefvar\undefined \gdef\putwordDefvar{Variable}\fi
+\ifx\putwordDefopt\undefined \gdef\putwordDefopt{User Option}\fi
+\ifx\putwordDeftypevar\undefined\gdef\putwordDeftypevar{Variable}\fi
+\ifx\putwordDeffunc\undefined \gdef\putwordDeffunc{Function}\fi
+\ifx\putwordDeftypefun\undefined\gdef\putwordDeftypefun{Function}\fi
% Ignore a token.
%
\let\c=\comment
-% @paragraphindent is defined for the Info formatting commands only.
-\let\paragraphindent=\comment
-
-% Prevent errors for section commands.
-% Used in @ignore and in failing conditionals.
-\def\ignoresections{%
-\let\chapter=\relax
-\let\unnumbered=\relax
-\let\top=\relax
-\let\unnumberedsec=\relax
-\let\unnumberedsection=\relax
-\let\unnumberedsubsec=\relax
-\let\unnumberedsubsection=\relax
-\let\unnumberedsubsubsec=\relax
-\let\unnumberedsubsubsection=\relax
-\let\section=\relax
-\let\subsec=\relax
-\let\subsubsec=\relax
-\let\subsection=\relax
-\let\subsubsection=\relax
-\let\appendix=\relax
-\let\appendixsec=\relax
-\let\appendixsection=\relax
-\let\appendixsubsec=\relax
-\let\appendixsubsection=\relax
-\let\appendixsubsubsec=\relax
-\let\appendixsubsubsection=\relax
-\let\contents=\relax
-\let\smallbook=\relax
-\let\titlepage=\relax
-}
-
-% Used in nested conditionals, where we have to parse the Texinfo source
-% and so want to turn off most commands, in case they are used
-% incorrectly.
+% @paragraphindent NCHARS
+% We'll use ems for NCHARS, close enough.
+% We cannot implement @paragraphindent asis, though.
+%
+\def\asisword{asis} % no translation, these are keywords
+\def\noneword{none}
%
-\def\ignoremorecommands{%
- \let\defcodeindex = \relax
- \let\defcv = \relax
- \let\deffn = \relax
- \let\deffnx = \relax
- \let\defindex = \relax
- \let\defivar = \relax
- \let\defmac = \relax
- \let\defmethod = \relax
- \let\defop = \relax
- \let\defopt = \relax
- \let\defspec = \relax
- \let\deftp = \relax
- \let\deftypefn = \relax
- \let\deftypefun = \relax
- \let\deftypevar = \relax
- \let\deftypevr = \relax
- \let\defun = \relax
- \let\defvar = \relax
- \let\defvr = \relax
- \let\ref = \relax
- \let\xref = \relax
- \let\printindex = \relax
- \let\pxref = \relax
- \let\settitle = \relax
- \let\setchapternewpage = \relax
- \let\setchapterstyle = \relax
- \let\everyheading = \relax
- \let\evenheading = \relax
- \let\oddheading = \relax
- \let\everyfooting = \relax
- \let\evenfooting = \relax
- \let\oddfooting = \relax
- \let\headings = \relax
- \let\include = \relax
- \let\lowersections = \relax
- \let\down = \relax
- \let\raisesections = \relax
- \let\up = \relax
- \let\set = \relax
- \let\clear = \relax
- \let\item = \relax
+\def\paragraphindent{\parsearg\doparagraphindent}
+\def\doparagraphindent#1{%
+ \def\temp{#1}%
+ \ifx\temp\asisword
+ \else
+ \ifx\temp\noneword
+ \defaultparindent = 0pt
+ \else
+ \defaultparindent = #1em
+ \fi
+ \fi
+ \parindent = \defaultparindent
}
-% Ignore @ignore ... @end ignore.
+% @asis just yields its argument. Used with @table, for example.
%
-\def\ignore{\doignore{ignore}}
+\def\asis#1{#1}
-% Ignore @ifinfo, @ifhtml, @ifnottex, @html, @menu, and @direntry text.
+% @math means output in math mode.
+% We don't use $'s directly in the definition of \math because control
+% sequences like \math are expanded when the toc file is written. Then,
+% we read the toc file back, the $'s will be normal characters (as they
+% should be, according to the definition of Texinfo). So we must use a
+% control sequence to switch into and out of math mode.
%
-\def\ifinfo{\doignore{ifinfo}}
-\def\ifhtml{\doignore{ifhtml}}
-\def\ifnottex{\doignore{ifnottex}}
-\def\html{\doignore{html}}
-\def\menu{\doignore{menu}}
-\def\direntry{\doignore{direntry}}
+% This isn't quite enough for @math to work properly in indices, but it
+% seems unlikely it will ever be needed there.
+%
+\let\implicitmath = $
+\def\math#1{\implicitmath #1\implicitmath}
-% @dircategory CATEGORY -- specify a category of the dir file
-% which this file should belong to. Ignore this in TeX.
-\let\dircategory = \comment
+% @bullet and @minus need the same treatment as @math, just above.
+\def\bullet{\implicitmath\ptexbullet\implicitmath}
+\def\minus{\implicitmath-\implicitmath}
-% Ignore text until a line `@end #1'.
-%
-\def\doignore#1{\begingroup
- % Don't complain about control sequences we have declared \outer.
- \ignoresections
- %
- % Define a command to swallow text until we reach `@end #1'.
- % This @ is a catcode 12 token (that is the normal catcode of @ in
- % this texinfo.tex file). We change the catcode of @ below to match.
- \long\def\doignoretext##1@end #1{\enddoignore}%
- %
- % Make sure that spaces turn into tokens that match what \doignoretext wants.
- \catcode32 = 10
- %
- % Ignore braces, too, so mismatched braces don't cause trouble.
- \catcode`\{ = 9
- \catcode`\} = 9
- %
- % We must not have @c interpreted as a control sequence.
- \catcode`\@ = 12
- %
- % Make the letter c a comment character so that the rest of the line
- % will be ignored. This way, the document can have (for example)
- % @c @end ifinfo
- % and the @end ifinfo will be properly ignored.
- % (We've just changed @ to catcode 12.)
- \catcode`\c = 14
- %
- % And now expand that command.
- \doignoretext
-}
+% @refill is a no-op.
+\let\refill=\relax
-% What we do to finish off ignored text.
+% If working on a large document in chapters, it is convenient to
+% be able to disable indexing, cross-referencing, and contents, for test runs.
+% This is done with @novalidate (before @setfilename).
%
-\def\enddoignore{\endgroup\ignorespaces}%
+\newif\iflinks \linkstrue % by default we want the aux files.
+\let\novalidate = \linksfalse
-\newif\ifwarnedobs\warnedobsfalse
-\def\obstexwarn{%
- \ifwarnedobs\relax\else
- % We need to warn folks that they may have trouble with TeX 3.0.
- % This uses \immediate\write16 rather than \message to get newlines.
- \immediate\write16{}
- \immediate\write16{WARNING: for users of Unix TeX 3.0!}
- \immediate\write16{This manual trips a bug in TeX version 3.0 (tex hangs).}
- \immediate\write16{If you are running another version of TeX, relax.}
- \immediate\write16{If you are running Unix TeX 3.0, kill this TeX process.}
- \immediate\write16{ Then upgrade your TeX installation if you can.}
- \immediate\write16{ (See ftp://ftp.gnu.org/pub/gnu/TeX.README.)}
- \immediate\write16{If you are stuck with version 3.0, run the}
- \immediate\write16{ script ``tex3patch'' from the Texinfo distribution}
- \immediate\write16{ to use a workaround.}
- \immediate\write16{}
- \global\warnedobstrue
- \fi
+% @setfilename is done at the beginning of every texinfo file.
+% So open here the files we need to have open while reading the input.
+% This makes it possible to make a .fmt file for texinfo.
+\def\setfilename{%
+ \iflinks
+ \readauxfile
+ \fi % \openindices needs to do some work in any case.
+ \openindices
+ \fixbackslash % Turn off hack to swallow `\input texinfo'.
+ \global\let\setfilename=\comment % Ignore extra @setfilename cmds.
+ %
+ % If texinfo.cnf is present on the system, read it.
+ % Useful for site-wide @afourpaper, etc.
+ % Just to be on the safe side, close the input stream before the \input.
+ \openin 1 texinfo.cnf
+ \ifeof1 \let\temp=\relax \else \def\temp{\input texinfo.cnf }\fi
+ \closein1
+ \temp
+ %
+ \comment % Ignore the actual filename.
}
-% **In TeX 3.0, setting text in \nullfont hangs tex. For a
-% workaround (which requires the file ``dummy.tfm'' to be installed),
-% uncomment the following line:
-%%%%%\font\nullfont=dummy\let\obstexwarn=\relax
-
-% Ignore text, except that we keep track of conditional commands for
-% purposes of nesting, up to an `@end #1' command.
+% Called from \setfilename.
%
-\def\nestedignore#1{%
- \obstexwarn
- % We must actually expand the ignored text to look for the @end
- % command, so that nested ignore constructs work. Thus, we put the
- % text into a \vbox and then do nothing with the result. To minimize
- % the change of memory overflow, we follow the approach outlined on
- % page 401 of the TeXbook: make the current font be a dummy font.
- %
- \setbox0 = \vbox\bgroup
- % Don't complain about control sequences we have declared \outer.
- \ignoresections
- %
- % Define `@end #1' to end the box, which will in turn undefine the
- % @end command again.
- \expandafter\def\csname E#1\endcsname{\egroup\ignorespaces}%
- %
- % We are going to be parsing Texinfo commands. Most cause no
- % trouble when they are used incorrectly, but some commands do
- % complicated argument parsing or otherwise get confused, so we
- % undefine them.
- %
- % We can't do anything about stray @-signs, unfortunately;
- % they'll produce `undefined control sequence' errors.
- \ignoremorecommands
- %
- % Set the current font to be \nullfont, a TeX primitive, and define
- % all the font commands to also use \nullfont. We don't use
- % dummy.tfm, as suggested in the TeXbook, because not all sites
- % might have that installed. Therefore, math mode will still
- % produce output, but that should be an extremely small amount of
- % stuff compared to the main input.
- %
- \nullfont
- \let\tenrm = \nullfont \let\tenit = \nullfont \let\tensl = \nullfont
- \let\tenbf = \nullfont \let\tentt = \nullfont \let\smallcaps = \nullfont
- \let\tensf = \nullfont
- % Similarly for index fonts (mostly for their use in
- % smallexample)
- \let\indrm = \nullfont \let\indit = \nullfont \let\indsl = \nullfont
- \let\indbf = \nullfont \let\indtt = \nullfont \let\indsc = \nullfont
- \let\indsf = \nullfont
- %
- % Don't complain when characters are missing from the fonts.
- \tracinglostchars = 0
- %
- % Don't bother to do space factor calculations.
- \frenchspacing
- %
- % Don't report underfull hboxes.
- \hbadness = 10000
- %
- % Do minimal line-breaking.
- \pretolerance = 10000
- %
- % Do not execute instructions in @tex
- \def\tex{\doignore{tex}}%
- % Do not execute macro definitions.
- % `c' is a comment character, so the word `macro' will get cut off.
- \def\macro{\doignore{ma}}%
-}
-
-% @set VAR sets the variable VAR to an empty value.
-% @set VAR REST-OF-LINE sets VAR to the value REST-OF-LINE.
-%
-% Since we want to separate VAR from REST-OF-LINE (which might be
-% empty), we can't just use \parsearg; we have to insert a space of our
-% own to delimit the rest of the line, and then take it out again if we
-% didn't need it. Make sure the catcode of space is correct to avoid
-% losing inside @example, for instance.
-%
-\def\set{\begingroup\catcode` =10
- \catcode`\-=12 \catcode`\_=12 % Allow - and _ in VAR.
- \parsearg\setxxx}
-\def\setxxx#1{\setyyy#1 \endsetyyy}
-\def\setyyy#1 #2\endsetyyy{%
- \def\temp{#2}%
- \ifx\temp\empty \global\expandafter\let\csname SET#1\endcsname = \empty
- \else \setzzz{#1}#2\endsetzzz % Remove the trailing space \setxxx inserted.
- \fi
- \endgroup
-}
-% Can't use \xdef to pre-expand #2 and save some time, since \temp or
-% \next or other control sequences that we've defined might get us into
-% an infinite loop. Consider `@set foo @cite{bar}'.
-\def\setzzz#1#2 \endsetzzz{\expandafter\gdef\csname SET#1\endcsname{#2}}
-
-% @clear VAR clears (i.e., unsets) the variable VAR.
-%
-\def\clear{\parsearg\clearxxx}
-\def\clearxxx#1{\global\expandafter\let\csname SET#1\endcsname=\relax}
-
-% @value{foo} gets the text saved in variable foo.
-%
-{
- \catcode`\_ = \active
- %
- % We might end up with active _ or - characters in the argument if
- % we're called from @code, as @code{@value{foo-bar_}}. So \let any
- % such active characters to their normal equivalents.
- \gdef\value{\begingroup
- \catcode`\-=12 \catcode`\_=12
- \indexbreaks \let_\normalunderscore
- \valuexxx}
-}
-\def\valuexxx#1{\expandablevalue{#1}\endgroup}
-
-% We have this subroutine so that we can handle at least some @value's
-% properly in indexes (we \let\value to this in \indexdummies). Ones
-% whose names contain - or _ still won't work, but we can't do anything
-% about that. The command has to be fully expandable, since the result
-% winds up in the index file. This means that if the variable's value
-% contains other Texinfo commands, it's almost certain it will fail
-% (although perhaps we could fix that with sufficient work to do a
-% one-level expansion on the result, instead of complete).
-%
-\def\expandablevalue#1{%
- \expandafter\ifx\csname SET#1\endcsname\relax
- {[No value for ``#1'']}%
- \else
- \csname SET#1\endcsname
- \fi
-}
-
-% @ifset VAR ... @end ifset reads the `...' iff VAR has been defined
-% with @set.
-%
-\def\ifset{\parsearg\ifsetxxx}
-\def\ifsetxxx #1{%
- \expandafter\ifx\csname SET#1\endcsname\relax
- \expandafter\ifsetfail
- \else
- \expandafter\ifsetsucceed
- \fi
-}
-\def\ifsetsucceed{\conditionalsucceed{ifset}}
-\def\ifsetfail{\nestedignore{ifset}}
-\defineunmatchedend{ifset}
-
-% @ifclear VAR ... @end ifclear reads the `...' iff VAR has never been
-% defined with @set, or has been undefined with @clear.
-%
-\def\ifclear{\parsearg\ifclearxxx}
-\def\ifclearxxx #1{%
- \expandafter\ifx\csname SET#1\endcsname\relax
- \expandafter\ifclearsucceed
- \else
- \expandafter\ifclearfail
- \fi
-}
-\def\ifclearsucceed{\conditionalsucceed{ifclear}}
-\def\ifclearfail{\nestedignore{ifclear}}
-\defineunmatchedend{ifclear}
-
-% @iftex, @ifnothtml, @ifnotinfo always succeed; we read the text
-% following, through the first @end iftex (etc.). Make `@end iftex'
-% (etc.) valid only after an @iftex.
-%
-\def\iftex{\conditionalsucceed{iftex}}
-\def\ifnothtml{\conditionalsucceed{ifnothtml}}
-\def\ifnotinfo{\conditionalsucceed{ifnotinfo}}
-\defineunmatchedend{iftex}
-\defineunmatchedend{ifnothtml}
-\defineunmatchedend{ifnotinfo}
-
-% We can't just want to start a group at @iftex (for example) and end it
-% at @end iftex, since then @set commands inside the conditional have no
-% effect (they'd get reverted at the end of the group). So we must
-% define \Eiftex to redefine itself to be its previous value. (We can't
-% just define it to fail again with an ``unmatched end'' error, since
-% the @ifset might be nested.)
-%
-\def\conditionalsucceed#1{%
- \edef\temp{%
- % Remember the current value of \E#1.
- \let\nece{prevE#1} = \nece{E#1}%
- %
- % At the `@end #1', redefine \E#1 to be its previous value.
- \def\nece{E#1}{\let\nece{E#1} = \nece{prevE#1}}%
- }%
- \temp
-}
-
-% We need to expand lots of \csname's, but we don't want to expand the
-% control sequences after we've constructed them.
-%
-\def\nece#1{\expandafter\noexpand\csname#1\endcsname}
-
-% @asis just yields its argument. Used with @table, for example.
-%
-\def\asis#1{#1}
-
-% @math means output in math mode.
-% We don't use $'s directly in the definition of \math because control
-% sequences like \math are expanded when the toc file is written. Then,
-% we read the toc file back, the $'s will be normal characters (as they
-% should be, according to the definition of Texinfo). So we must use a
-% control sequence to switch into and out of math mode.
-%
-% This isn't quite enough for @math to work properly in indices, but it
-% seems unlikely it will ever be needed there.
-%
-\let\implicitmath = $
-\def\math#1{\implicitmath #1\implicitmath}
-
-% @bullet and @minus need the same treatment as @math, just above.
-\def\bullet{\implicitmath\ptexbullet\implicitmath}
-\def\minus{\implicitmath-\implicitmath}
-
-% @refill is a no-op.
-\let\refill=\relax
-
-% If working on a large document in chapters, it is convenient to
-% be able to disable indexing, cross-referencing, and contents, for test runs.
-% This is done with @novalidate (before @setfilename).
-%
-\newif\iflinks \linkstrue % by default we want the aux files.
-\let\novalidate = \linksfalse
-
-% @setfilename is done at the beginning of every texinfo file.
-% So open here the files we need to have open while reading the input.
-% This makes it possible to make a .fmt file for texinfo.
-\def\setfilename{%
- \iflinks
- \readauxfile
- \fi % \openindices needs to do some work in any case.
- \openindices
- \fixbackslash % Turn off hack to swallow `\input texinfo'.
- \global\let\setfilename=\comment % Ignore extra @setfilename cmds.
- %
- % If texinfo.cnf is present on the system, read it.
- % Useful for site-wide @afourpaper, etc.
- % Just to be on the safe side, close the input stream before the \input.
- \openin 1 texinfo.cnf
- \ifeof1 \let\temp=\relax \else \def\temp{\input texinfo.cnf }\fi
- \closein1
- \temp
- %
- \comment % Ignore the actual filename.
-}
-
-% Called from \setfilename.
-%
-\def\openindices{%
- \newindex{cp}%
- \newcodeindex{fn}%
- \newcodeindex{vr}%
- \newcodeindex{tp}%
- \newcodeindex{ky}%
- \newcodeindex{pg}%
+\def\openindices{%
+ \newindex{cp}%
+ \newcodeindex{fn}%
+ \newcodeindex{vr}%
+ \newcodeindex{tp}%
+ \newcodeindex{ky}%
+ \newcodeindex{pg}%
}
% @bye.
\let\env=\code
\let\command=\code
-% @uref (abbreviation for `urlref') takes an optional second argument
-% specifying the text to display. First (mandatory) arg is the url.
-% Perhaps eventually put in a hypertex \special here.
+% @uref (abbreviation for `urlref') takes an optional (comma-separated)
+% second argument specifying the text to display and an optional third
+% arg as text to display instead of (rather than in addition to) the url
+% itself. First (mandatory) arg is the url. Perhaps eventually put in
+% a hypertex \special here.
%
-\def\uref#1{\urefxxx #1,,\finish}
-\def\urefxxx#1,#2,#3\finish{%
- \setbox0 = \hbox{\ignorespaces #2}%
+\def\uref#1{\douref #1,,,\finish}
+\def\douref#1,#2,#3,#4\finish{%
+ \setbox0 = \hbox{\ignorespaces #3}%
\ifdim\wd0 > 0pt
- \unhbox0\ (\code{#1})%
+ \unhbox0 % third arg given, show only that
\else
- \code{#1}%
+ \setbox0 = \hbox{\ignorespaces #2}%
+ \ifdim\wd0 > 0pt
+ \unhbox0\ (\code{#1})% second arg given, show both it and url
+ \else
+ \code{#1}% only url given, so show it
+ \fi
\fi
}
\multitablecolspace=12pt
\multitablelinespace=0pt
-% Macros used to set up halign preamble:
+% Macros used to set up halign preamble:
+%
+\let\endsetuptable\relax
+\def\xendsetuptable{\endsetuptable}
+\let\columnfractions\relax
+\def\xcolumnfractions{\columnfractions}
+\newif\ifsetpercent
+
+% #1 is the part of the @columnfraction before the decimal point, which
+% is presumably either 0 or the empty string (but we don't check, we
+% just throw it away). #2 is the decimal part, which we use as the
+% percent of \hsize for this column.
+\def\pickupwholefraction#1.#2 {%
+ \global\advance\colcount by 1
+ \expandafter\xdef\csname col\the\colcount\endcsname{.#2\hsize}%
+ \setuptable
+}
+
+\newcount\colcount
+\def\setuptable#1{%
+ \def\firstarg{#1}%
+ \ifx\firstarg\xendsetuptable
+ \let\go = \relax
+ \else
+ \ifx\firstarg\xcolumnfractions
+ \global\setpercenttrue
+ \else
+ \ifsetpercent
+ \let\go\pickupwholefraction
+ \else
+ \global\advance\colcount by 1
+ \setbox0=\hbox{#1\unskip }% Add a normal word space as a separator;
+ % typically that is always in the input, anyway.
+ \expandafter\xdef\csname col\the\colcount\endcsname{\the\wd0}%
+ \fi
+ \fi
+ \ifx\go\pickupwholefraction
+ % Put the argument back for the \pickupwholefraction call, so
+ % we'll always have a period there to be parsed.
+ \def\go{\pickupwholefraction#1}%
+ \else
+ \let\go = \setuptable
+ \fi%
+ \fi
+ \go
+}
+
+% multitable syntax
+\def\tab{&\hskip1sp\relax} % 2/2/96
+ % tiny skip here makes sure this column space is
+ % maintained, even if it is never used.
+
+% @multitable ... @end multitable definitions:
+%
+\def\multitable{\parsearg\dotable}
+\def\dotable#1{\bgroup
+ \vskip\parskip
+ \let\item\crcr
+ \tolerance=9500
+ \hbadness=9500
+ \setmultitablespacing
+ \parskip=\multitableparskip
+ \parindent=\multitableparindent
+ \overfullrule=0pt
+ \global\colcount=0
+ \def\Emultitable{\global\setpercentfalse\cr\egroup\egroup}%
+ %
+ % To parse everything between @multitable and @item:
+ \setuptable#1 \endsetuptable
+ %
+ % \everycr will reset column counter, \colcount, at the end of
+ % each line. Every column entry will cause \colcount to advance by one.
+ % The table preamble
+ % looks at the current \colcount to find the correct column width.
+ \everycr{\noalign{%
+ %
+ % \filbreak%% keeps underfull box messages off when table breaks over pages.
+ % Maybe so, but it also creates really weird page breaks when the table
+ % breaks over pages. Wouldn't \vfil be better? Wait until the problem
+ % manifests itself, so it can be fixed for real --karl.
+ \global\colcount=0\relax}}%
+ %
+ % This preamble sets up a generic column definition, which will
+ % be used as many times as user calls for columns.
+ % \vtop will set a single line and will also let text wrap and
+ % continue for many paragraphs if desired.
+ \halign\bgroup&\global\advance\colcount by 1\relax
+ \multistrut\vtop{\hsize=\expandafter\csname col\the\colcount\endcsname
+ %
+ % In order to keep entries from bumping into each other
+ % we will add a \leftskip of \multitablecolspace to all columns after
+ % the first one.
+ %
+ % If a template has been used, we will add \multitablecolspace
+ % to the width of each template entry.
+ %
+ % If the user has set preamble in terms of percent of \hsize we will
+ % use that dimension as the width of the column, and the \leftskip
+ % will keep entries from bumping into each other. Table will start at
+ % left margin and final column will justify at right margin.
+ %
+ % Make sure we don't inherit \rightskip from the outer environment.
+ \rightskip=0pt
+ \ifnum\colcount=1
+ % The first column will be indented with the surrounding text.
+ \advance\hsize by\leftskip
+ \else
+ \ifsetpercent \else
+ % If user has not set preamble in terms of percent of \hsize
+ % we will advance \hsize by \multitablecolspace.
+ \advance\hsize by \multitablecolspace
+ \fi
+ % In either case we will make \leftskip=\multitablecolspace:
+ \leftskip=\multitablecolspace
+ \fi
+ % Ignoring space at the beginning and end avoids an occasional spurious
+ % blank line, when TeX decides to break the line at the space before the
+ % box from the multistrut, so the strut ends up on a line by itself.
+ % For example:
+ % @multitable @columnfractions .11 .89
+ % @item @code{#}
+ % @tab Legal holiday which is valid in major parts of the whole country.
+ % Is automatically provided with highlighting sequences respectively marking
+ % characters.
+ \noindent\ignorespaces##\unskip\multistrut}\cr
+}
+
+\def\setmultitablespacing{% test to see if user has set \multitablelinespace.
+% If so, do nothing. If not, give it an appropriate dimension based on
+% current baselineskip.
+\ifdim\multitablelinespace=0pt
+%% strut to put in table in case some entry doesn't have descenders,
+%% to keep lines equally spaced
+\let\multistrut = \strut
+%% Test to see if parskip is larger than space between lines of
+%% table. If not, do nothing.
+%% If so, set to same dimension as multitablelinespace.
+\else
+\gdef\multistrut{\vrule height\multitablelinespace depth\dp0
+width0pt\relax} \fi
+\ifdim\multitableparskip>\multitablelinespace
+\global\multitableparskip=\multitablelinespace
+\global\advance\multitableparskip-7pt %% to keep parskip somewhat smaller
+ %% than skip between lines in the table.
+\fi%
+\ifdim\multitableparskip=0pt
+\global\multitableparskip=\multitablelinespace
+\global\advance\multitableparskip-7pt %% to keep parskip somewhat smaller
+ %% than skip between lines in the table.
+\fi}
+
+
+\message{conditionals,}
+% Prevent errors for section commands.
+% Used in @ignore and in failing conditionals.
+\def\ignoresections{%
+ \let\chapter=\relax
+ \let\unnumbered=\relax
+ \let\top=\relax
+ \let\unnumberedsec=\relax
+ \let\unnumberedsection=\relax
+ \let\unnumberedsubsec=\relax
+ \let\unnumberedsubsection=\relax
+ \let\unnumberedsubsubsec=\relax
+ \let\unnumberedsubsubsection=\relax
+ \let\section=\relax
+ \let\subsec=\relax
+ \let\subsubsec=\relax
+ \let\subsection=\relax
+ \let\subsubsection=\relax
+ \let\appendix=\relax
+ \let\appendixsec=\relax
+ \let\appendixsection=\relax
+ \let\appendixsubsec=\relax
+ \let\appendixsubsection=\relax
+ \let\appendixsubsubsec=\relax
+ \let\appendixsubsubsection=\relax
+ \let\contents=\relax
+ \let\smallbook=\relax
+ \let\titlepage=\relax
+}
+
+% Used in nested conditionals, where we have to parse the Texinfo source
+% and so want to turn off most commands, in case they are used
+% incorrectly.
+%
+\def\ignoremorecommands{%
+ \let\defcodeindex = \relax
+ \let\defcv = \relax
+ \let\deffn = \relax
+ \let\deffnx = \relax
+ \let\defindex = \relax
+ \let\defivar = \relax
+ \let\defmac = \relax
+ \let\defmethod = \relax
+ \let\defop = \relax
+ \let\defopt = \relax
+ \let\defspec = \relax
+ \let\deftp = \relax
+ \let\deftypefn = \relax
+ \let\deftypefun = \relax
+ \let\deftypevar = \relax
+ \let\deftypevr = \relax
+ \let\defun = \relax
+ \let\defvar = \relax
+ \let\defvr = \relax
+ \let\ref = \relax
+ \let\xref = \relax
+ \let\printindex = \relax
+ \let\pxref = \relax
+ \let\settitle = \relax
+ \let\setchapternewpage = \relax
+ \let\setchapterstyle = \relax
+ \let\everyheading = \relax
+ \let\evenheading = \relax
+ \let\oddheading = \relax
+ \let\everyfooting = \relax
+ \let\evenfooting = \relax
+ \let\oddfooting = \relax
+ \let\headings = \relax
+ \let\include = \relax
+ \let\lowersections = \relax
+ \let\down = \relax
+ \let\raisesections = \relax
+ \let\up = \relax
+ \let\set = \relax
+ \let\clear = \relax
+ \let\item = \relax
+}
+
+% Ignore @ignore ... @end ignore.
+%
+\def\ignore{\doignore{ignore}}
+
+% Ignore @ifinfo, @ifhtml, @ifnottex, @html, @menu, and @direntry text.
+%
+\def\ifinfo{\doignore{ifinfo}}
+\def\ifhtml{\doignore{ifhtml}}
+\def\ifnottex{\doignore{ifnottex}}
+\def\html{\doignore{html}}
+\def\menu{\doignore{menu}}
+\def\direntry{\doignore{direntry}}
+
+% @dircategory CATEGORY -- specify a category of the dir file
+% which this file should belong to. Ignore this in TeX.
+\let\dircategory = \comment
+
+% Ignore text until a line `@end #1'.
+%
+\def\doignore#1{\begingroup
+ % Don't complain about control sequences we have declared \outer.
+ \ignoresections
+ %
+ % Define a command to swallow text until we reach `@end #1'.
+ % This @ is a catcode 12 token (that is the normal catcode of @ in
+ % this texinfo.tex file). We change the catcode of @ below to match.
+ \long\def\doignoretext##1@end #1{\enddoignore}%
+ %
+ % Make sure that spaces turn into tokens that match what \doignoretext wants.
+ \catcode32 = 10
+ %
+ % Ignore braces, too, so mismatched braces don't cause trouble.
+ \catcode`\{ = 9
+ \catcode`\} = 9
+ %
+ % We must not have @c interpreted as a control sequence.
+ \catcode`\@ = 12
+ %
+ % Make the letter c a comment character so that the rest of the line
+ % will be ignored. This way, the document can have (for example)
+ % @c @end ifinfo
+ % and the @end ifinfo will be properly ignored.
+ % (We've just changed @ to catcode 12.)
+ \catcode`\c = 14
+ %
+ % And now expand that command.
+ \doignoretext
+}
+
+% What we do to finish off ignored text.
+%
+\def\enddoignore{\endgroup\ignorespaces}%
+
+\newif\ifwarnedobs\warnedobsfalse
+\def\obstexwarn{%
+ \ifwarnedobs\relax\else
+ % We need to warn folks that they may have trouble with TeX 3.0.
+ % This uses \immediate\write16 rather than \message to get newlines.
+ \immediate\write16{}
+ \immediate\write16{WARNING: for users of Unix TeX 3.0!}
+ \immediate\write16{This manual trips a bug in TeX version 3.0 (tex hangs).}
+ \immediate\write16{If you are running another version of TeX, relax.}
+ \immediate\write16{If you are running Unix TeX 3.0, kill this TeX process.}
+ \immediate\write16{ Then upgrade your TeX installation if you can.}
+ \immediate\write16{ (See ftp://ftp.gnu.org/pub/gnu/TeX.README.)}
+ \immediate\write16{If you are stuck with version 3.0, run the}
+ \immediate\write16{ script ``tex3patch'' from the Texinfo distribution}
+ \immediate\write16{ to use a workaround.}
+ \immediate\write16{}
+ \global\warnedobstrue
+ \fi
+}
+
+% **In TeX 3.0, setting text in \nullfont hangs tex. For a
+% workaround (which requires the file ``dummy.tfm'' to be installed),
+% uncomment the following line:
+%%%%%\font\nullfont=dummy\let\obstexwarn=\relax
+
+% Ignore text, except that we keep track of conditional commands for
+% purposes of nesting, up to an `@end #1' command.
+%
+\def\nestedignore#1{%
+ \obstexwarn
+ % We must actually expand the ignored text to look for the @end
+ % command, so that nested ignore constructs work. Thus, we put the
+ % text into a \vbox and then do nothing with the result. To minimize
+ % the change of memory overflow, we follow the approach outlined on
+ % page 401 of the TeXbook: make the current font be a dummy font.
+ %
+ \setbox0 = \vbox\bgroup
+ % Don't complain about control sequences we have declared \outer.
+ \ignoresections
+ %
+ % Define `@end #1' to end the box, which will in turn undefine the
+ % @end command again.
+ \expandafter\def\csname E#1\endcsname{\egroup\ignorespaces}%
+ %
+ % We are going to be parsing Texinfo commands. Most cause no
+ % trouble when they are used incorrectly, but some commands do
+ % complicated argument parsing or otherwise get confused, so we
+ % undefine them.
+ %
+ % We can't do anything about stray @-signs, unfortunately;
+ % they'll produce `undefined control sequence' errors.
+ \ignoremorecommands
+ %
+ % Set the current font to be \nullfont, a TeX primitive, and define
+ % all the font commands to also use \nullfont. We don't use
+ % dummy.tfm, as suggested in the TeXbook, because not all sites
+ % might have that installed. Therefore, math mode will still
+ % produce output, but that should be an extremely small amount of
+ % stuff compared to the main input.
+ %
+ \nullfont
+ \let\tenrm = \nullfont \let\tenit = \nullfont \let\tensl = \nullfont
+ \let\tenbf = \nullfont \let\tentt = \nullfont \let\smallcaps = \nullfont
+ \let\tensf = \nullfont
+ % Similarly for index fonts (mostly for their use in
+ % smallexample)
+ \let\indrm = \nullfont \let\indit = \nullfont \let\indsl = \nullfont
+ \let\indbf = \nullfont \let\indtt = \nullfont \let\indsc = \nullfont
+ \let\indsf = \nullfont
+ %
+ % Don't complain when characters are missing from the fonts.
+ \tracinglostchars = 0
+ %
+ % Don't bother to do space factor calculations.
+ \frenchspacing
+ %
+ % Don't report underfull hboxes.
+ \hbadness = 10000
+ %
+ % Do minimal line-breaking.
+ \pretolerance = 10000
+ %
+ % Do not execute instructions in @tex
+ \def\tex{\doignore{tex}}%
+ % Do not execute macro definitions.
+ % `c' is a comment character, so the word `macro' will get cut off.
+ \def\macro{\doignore{ma}}%
+}
+
+% @set VAR sets the variable VAR to an empty value.
+% @set VAR REST-OF-LINE sets VAR to the value REST-OF-LINE.
+%
+% Since we want to separate VAR from REST-OF-LINE (which might be
+% empty), we can't just use \parsearg; we have to insert a space of our
+% own to delimit the rest of the line, and then take it out again if we
+% didn't need it. Make sure the catcode of space is correct to avoid
+% losing inside @example, for instance.
+%
+\def\set{\begingroup\catcode` =10
+ \catcode`\-=12 \catcode`\_=12 % Allow - and _ in VAR.
+ \parsearg\setxxx}
+\def\setxxx#1{\setyyy#1 \endsetyyy}
+\def\setyyy#1 #2\endsetyyy{%
+ \def\temp{#2}%
+ \ifx\temp\empty \global\expandafter\let\csname SET#1\endcsname = \empty
+ \else \setzzz{#1}#2\endsetzzz % Remove the trailing space \setxxx inserted.
+ \fi
+ \endgroup
+}
+% Can't use \xdef to pre-expand #2 and save some time, since \temp or
+% \next or other control sequences that we've defined might get us into
+% an infinite loop. Consider `@set foo @cite{bar}'.
+\def\setzzz#1#2 \endsetzzz{\expandafter\gdef\csname SET#1\endcsname{#2}}
+
+% @clear VAR clears (i.e., unsets) the variable VAR.
%
-\let\endsetuptable\relax
-\def\xendsetuptable{\endsetuptable}
-\let\columnfractions\relax
-\def\xcolumnfractions{\columnfractions}
-\newif\ifsetpercent
+\def\clear{\parsearg\clearxxx}
+\def\clearxxx#1{\global\expandafter\let\csname SET#1\endcsname=\relax}
-% #1 is the part of the @columnfraction before the decimal point, which
-% is presumably either 0 or the empty string (but we don't check, we
-% just throw it away). #2 is the decimal part, which we use as the
-% percent of \hsize for this column.
-\def\pickupwholefraction#1.#2 {%
- \global\advance\colcount by 1
- \expandafter\xdef\csname col\the\colcount\endcsname{.#2\hsize}%
- \setuptable
+% @value{foo} gets the text saved in variable foo.
+{
+ \catcode`\_ = \active
+ %
+ % We might end up with active _ or - characters in the argument if
+ % we're called from @code, as @code{@value{foo-bar_}}. So \let any
+ % such active characters to their normal equivalents.
+ \gdef\value{\begingroup
+ \catcode`\-=12 \catcode`\_=12
+ \indexbreaks \let_\normalunderscore
+ \valuexxx}
}
+\def\valuexxx#1{\expandablevalue{#1}\endgroup}
-\newcount\colcount
-\def\setuptable#1{%
- \def\firstarg{#1}%
- \ifx\firstarg\xendsetuptable
- \let\go = \relax
+% We have this subroutine so that we can handle at least some @value's
+% properly in indexes (we \let\value to this in \indexdummies). Ones
+% whose names contain - or _ still won't work, but we can't do anything
+% about that. The command has to be fully expandable, since the result
+% winds up in the index file. This means that if the variable's value
+% contains other Texinfo commands, it's almost certain it will fail
+% (although perhaps we could fix that with sufficient work to do a
+% one-level expansion on the result, instead of complete).
+%
+\def\expandablevalue#1{%
+ \expandafter\ifx\csname SET#1\endcsname\relax
+ {[No value for ``#1'']}%
\else
- \ifx\firstarg\xcolumnfractions
- \global\setpercenttrue
- \else
- \ifsetpercent
- \let\go\pickupwholefraction
- \else
- \global\advance\colcount by 1
- \setbox0=\hbox{#1\unskip }% Add a normal word space as a separator;
- % typically that is always in the input, anyway.
- \expandafter\xdef\csname col\the\colcount\endcsname{\the\wd0}%
- \fi
- \fi
- \ifx\go\pickupwholefraction
- % Put the argument back for the \pickupwholefraction call, so
- % we'll always have a period there to be parsed.
- \def\go{\pickupwholefraction#1}%
- \else
- \let\go = \setuptable
- \fi%
+ \csname SET#1\endcsname
\fi
- \go
}
-% multitable syntax
-\def\tab{&\hskip1sp\relax} % 2/2/96
- % tiny skip here makes sure this column space is
- % maintained, even if it is never used.
+% @ifset VAR ... @end ifset reads the `...' iff VAR has been defined
+% with @set.
+%
+\def\ifset{\parsearg\ifsetxxx}
+\def\ifsetxxx #1{%
+ \expandafter\ifx\csname SET#1\endcsname\relax
+ \expandafter\ifsetfail
+ \else
+ \expandafter\ifsetsucceed
+ \fi
+}
+\def\ifsetsucceed{\conditionalsucceed{ifset}}
+\def\ifsetfail{\nestedignore{ifset}}
+\defineunmatchedend{ifset}
-% @multitable ... @end multitable definitions:
+% @ifclear VAR ... @end ifclear reads the `...' iff VAR has never been
+% defined with @set, or has been undefined with @clear.
%
-\def\multitable{\parsearg\dotable}
-\def\dotable#1{\bgroup
- \vskip\parskip
- \let\item\crcr
- \tolerance=9500
- \hbadness=9500
- \setmultitablespacing
- \parskip=\multitableparskip
- \parindent=\multitableparindent
- \overfullrule=0pt
- \global\colcount=0
- \def\Emultitable{\global\setpercentfalse\cr\egroup\egroup}%
- %
- % To parse everything between @multitable and @item:
- \setuptable#1 \endsetuptable
- %
- % \everycr will reset column counter, \colcount, at the end of
- % each line. Every column entry will cause \colcount to advance by one.
- % The table preamble
- % looks at the current \colcount to find the correct column width.
- \everycr{\noalign{%
- %
- % \filbreak%% keeps underfull box messages off when table breaks over pages.
- % Maybe so, but it also creates really weird page breaks when the table
- % breaks over pages. Wouldn't \vfil be better? Wait until the problem
- % manifests itself, so it can be fixed for real --karl.
- \global\colcount=0\relax}}%
- %
- % This preamble sets up a generic column definition, which will
- % be used as many times as user calls for columns.
- % \vtop will set a single line and will also let text wrap and
- % continue for many paragraphs if desired.
- \halign\bgroup&\global\advance\colcount by 1\relax
- \multistrut\vtop{\hsize=\expandafter\csname col\the\colcount\endcsname
- %
- % In order to keep entries from bumping into each other
- % we will add a \leftskip of \multitablecolspace to all columns after
- % the first one.
- %
- % If a template has been used, we will add \multitablecolspace
- % to the width of each template entry.
- %
- % If the user has set preamble in terms of percent of \hsize we will
- % use that dimension as the width of the column, and the \leftskip
- % will keep entries from bumping into each other. Table will start at
- % left margin and final column will justify at right margin.
- %
- % Make sure we don't inherit \rightskip from the outer environment.
- \rightskip=0pt
- \ifnum\colcount=1
- % The first column will be indented with the surrounding text.
- \advance\hsize by\leftskip
+\def\ifclear{\parsearg\ifclearxxx}
+\def\ifclearxxx #1{%
+ \expandafter\ifx\csname SET#1\endcsname\relax
+ \expandafter\ifclearsucceed
\else
- \ifsetpercent \else
- % If user has not set preamble in terms of percent of \hsize
- % we will advance \hsize by \multitablecolspace.
- \advance\hsize by \multitablecolspace
- \fi
- % In either case we will make \leftskip=\multitablecolspace:
- \leftskip=\multitablecolspace
+ \expandafter\ifclearfail
\fi
- % Ignoring space at the beginning and end avoids an occasional spurious
- % blank line, when TeX decides to break the line at the space before the
- % box from the multistrut, so the strut ends up on a line by itself.
- % For example:
- % @multitable @columnfractions .11 .89
- % @item @code{#}
- % @tab Legal holiday which is valid in major parts of the whole country.
- % Is automatically provided with highlighting sequences respectively marking
- % characters.
- \noindent\ignorespaces##\unskip\multistrut}\cr
}
+\def\ifclearsucceed{\conditionalsucceed{ifclear}}
+\def\ifclearfail{\nestedignore{ifclear}}
+\defineunmatchedend{ifclear}
-\def\setmultitablespacing{% test to see if user has set \multitablelinespace.
-% If so, do nothing. If not, give it an appropriate dimension based on
-% current baselineskip.
-\ifdim\multitablelinespace=0pt
-%% strut to put in table in case some entry doesn't have descenders,
-%% to keep lines equally spaced
-\let\multistrut = \strut
-%% Test to see if parskip is larger than space between lines of
-%% table. If not, do nothing.
-%% If so, set to same dimension as multitablelinespace.
-\else
-\gdef\multistrut{\vrule height\multitablelinespace depth\dp0
-width0pt\relax} \fi
-\ifdim\multitableparskip>\multitablelinespace
-\global\multitableparskip=\multitablelinespace
-\global\advance\multitableparskip-7pt %% to keep parskip somewhat smaller
- %% than skip between lines in the table.
-\fi%
-\ifdim\multitableparskip=0pt
-\global\multitableparskip=\multitablelinespace
-\global\advance\multitableparskip-7pt %% to keep parskip somewhat smaller
- %% than skip between lines in the table.
-\fi}
+% @iftex, @ifnothtml, @ifnotinfo always succeed; we read the text
+% following, through the first @end iftex (etc.). Make `@end iftex'
+% (etc.) valid only after an @iftex.
+%
+\def\iftex{\conditionalsucceed{iftex}}
+\def\ifnothtml{\conditionalsucceed{ifnothtml}}
+\def\ifnotinfo{\conditionalsucceed{ifnotinfo}}
+\defineunmatchedend{iftex}
+\defineunmatchedend{ifnothtml}
+\defineunmatchedend{ifnotinfo}
+
+% We can't just want to start a group at @iftex (for example) and end it
+% at @end iftex, since then @set commands inside the conditional have no
+% effect (they'd get reverted at the end of the group). So we must
+% define \Eiftex to redefine itself to be its previous value. (We can't
+% just define it to fail again with an ``unmatched end'' error, since
+% the @ifset might be nested.)
+%
+\def\conditionalsucceed#1{%
+ \edef\temp{%
+ % Remember the current value of \E#1.
+ \let\nece{prevE#1} = \nece{E#1}%
+ %
+ % At the `@end #1', redefine \E#1 to be its previous value.
+ \def\nece{E#1}{\let\nece{E#1} = \nece{prevE#1}}%
+ }%
+ \temp
+}
+
+% We need to expand lots of \csname's, but we don't want to expand the
+% control sequences after we've constructed them.
+%
+\def\nece#1{\expandafter\noexpand\csname#1\endcsname}
+
+% @defininfoenclose.
+\let\definfoenclose=\comment
\message{indexing,}
\def\subentry{ #3}%
\fi
%
- % First process the index-string with all font commands turned off
- % to get the string to sort by.
+ % First process the index entry with all font commands turned
+ % off to get the string to sort by.
{\indexnofonts \xdef\indexsorttmp{#2\subentry}}%
%
- % Now produce the complete index entry, with both the sort key and the
- % original text, including any font commands.
+ % Now the real index entry with the fonts.
\toks0 = {#2}%
+ %
+ % If third (subentry) arg is present, add it to the index
+ % string. And include a space.
+ \ifx\thirdarg\emptymacro \else
+ \toks0 = \expandafter{\the\toks0 \space #3}%
+ \fi
+ %
+ % Set up the complete index entry, with both the sort key
+ % and the original text, including any font commands. We write
+ % three arguments to \entry to the .?? file, texindex reduces to
+ % two when writing the .??s sorted result.
\edef\temp{%
\write\csname#1indfile\endcsname{%
\realbackslash entry{\indexsorttmp}{\folio}{\the\toks0}}%
}%
%
- % If third (subentry) arg is present, add it to the index string.
- \ifx\thirdarg\emptymacro \else
- \toks0 = {#3}%
- \edef\temp{\temp{\the\toks0}}%
- \fi
- %
% If a skip is the last thing on the list now, preserve it
% by backing up by \lastskip, doing the \write, then inserting
% the skip again. Otherwise, the whatsit generated by the
\defopvarparsebody\Edefcv\defcvx\defcvarheader\defcvtype}
\def\defcvarheader #1#2#3{%
-\dosubind {vr}{\code{#2}}{of #1}% Make entry in var index
-\begingroup\defname {#2}{\defcvtype{}\putwordOf\ #1}%
+\dosubind {vr}{\code{#2}}{\putwordof\ #1}% Make entry in var index
+\begingroup\defname {#2}{\defcvtype\ \putwordof\ #1}%
\defvarargs {#3}\endgroup %
}
\def\defivar{\defvrparsebody\Edefivar\defivarx\defivarheader}
\def\defivarheader #1#2#3{%
-\dosubind {vr}{\code{#2}}{of #1}% Make entry in var index
-\begingroup\defname {#2}{\putwordDefivar\putwordOf\ #1}%
+\dosubind {vr}{\code{#2}}{\putwordof\ #1}% Make entry in var index
+\begingroup\defname {#2}{\putwordDefivar\ \putwordof\ #1}%
\defvarargs {#3}\endgroup %
}
\begingroup \newlinechar`\^^M
% Undo catcode changes of \startcontents and \doprintindex
\catcode`\@=0 \catcode`\\=12 \escapechar=`\@
- \toks0={#1}%
+ % Append \endinput to make sure that TeX does not see the ending newline.
+ \toks0={#1\endinput}%
\immediate\openout\macscribble=\jobname.tmp
\immediate\write\macscribble{\the\toks0}%
\immediate\closeout\macscribble
\begingroup \newlinechar`\^^M
% Undo catcode changes of \startcontents and \doprintindex
\catcode`\@=0 \catcode`\\=12 \escapechar=`\@
-\let\xeatspaces\eatspaces\scantokens{#1}\endgroup}
+\let\xeatspaces\eatspaces\scantokens{#1\endinput}\endgroup}
\fi
\newcount\paramno % Count of parameters
\global\expandafter\let \csname ismacro.#1\endcsname=0%
% Remove the macro name from \macrolist
\begingroup
- \edef\tempa{\expandafter\noexpand\csname#1\endcsname}
+ \edef\tempa{\expandafter\noexpand\csname#1\endcsname}%
\def\do##1{%
\def\tempb{##1}%
\ifx\tempa\tempb
\else
\toks0 = \expandafter{\newmacrolist\do}%
\edef\newmacrolist{\the\toks0\expandafter\noexpand\tempa}%
- \fi}
+ \fi}%
\def\newmacrolist{}%
% Execute macro list to define \newmacrolist
\macrolist
\else % many
\expandafter\xdef\csname\the\macname\endcsname{%
\bgroup\noexpand\macroargctxt
- \noexpand\csname\the\macname xx\endcsname}
+ \noexpand\csname\the\macname xx\endcsname}%
\expandafter\xdef\csname\the\macname xx\endcsname##1{%
\expandafter\noexpand\csname\the\macname xxx\endcsname ##1,}%
\expandafter\expandafter
\else % many
\expandafter\xdef\csname\the\macname\endcsname{%
\bgroup\noexpand\macroargctxt
- \expandafter\noexpand\csname\the\macname xx\endcsname}
+ \expandafter\noexpand\csname\the\macname xx\endcsname}%
\expandafter\xdef\csname\the\macname xx\endcsname##1{%
\expandafter\noexpand\csname\the\macname xxx\endcsname ##1,}%
\expandafter\expandafter
\def\turnoffmacros{\begingroup \def\do##1{\let\noexpand##1=\relax}%
\edef\next{\macrolist}\expandafter\endgroup\next}
+
+% @alias.
+\def\alias#1=#2{\gdef#1{#2}}
+
+
\message{cross references,}
\newwrite\auxfile
\indexdummies
\dosetq{#1-title}{Ytitle}%
\dosetq{#1-pg}{Ypagenumber}%
- \dosetq{#1-snt}{#2}
+ \dosetq{#1-snt}{#2}%
}}
% @xref, @pxref, and @ref generate cross-references. For \xrefX, #1 is
}
-\message{paper sizes,}
-% And other related parameters.
+\message{localization,}
+
+% @documentlanguage is usually given very early, just after
+% @setfilename. If done too late, it may not override everything
+% properly. Single argument is the language abbreviation.
+% It would be nice if we could set up a hyphenation file here.
+%
+\def\documentlanguage{\parsearg\dodocumentlanguage}
+\def\dodocumentlanguage#1{%
+ \tex % read txi-??.tex file in plain TeX.
+ % Read the file if it exists.
+ \openin 1 txi-#1.tex
+ \ifeof1
+ \errhelp = \nolanghelp
+ \errmessage{Cannot read language file txi-#1.tex}%
+ \let\temp = \relax
+ \else
+ \def\temp{\input txi-#1.tex }%
+ \fi
+ \temp
+ \endgroup
+}
+\newhelp\nolanghelp{The given language definition file cannot be found or
+is empty. Maybe you need to install it? In the current directory
+should work if nowhere else does.}
+
+
+% @documentencoding should change something in TeX eventually, most
+% likely, but for now just recognize it.
+\let\documentencoding = \comment
+
+% Page size parameters.
+%
\newdimen\defaultparindent \defaultparindent = 15pt
\chapheadingskip = 15pt plus 4pt minus 2pt
% Use TeX 3.0's \emergencystretch to help line breaking, but if we're
% using an old version of TeX, don't do anything. We want the amount of
% stretch added to depend on the line length, hence the dependence on
-% \hsize. This makes it come to about 9pt for the 8.5x11 format. We
-% call this whenever the paper size is set.
+% \hsize. We call this whenever the paper size is set.
%
\def\setemergencystretch{%
\ifx\emergencystretch\thisisundefined
\def\emergencystretch{\dimen0}%
\else
\emergencystretch = \hsize
- \divide\emergencystretch by 45
+ \divide\emergencystretch by 40
\fi
}
@c eval: (add-hook 'write-file-hooks 'time-stamp)
@c page-delimiter: "^\\\\message"
@c time-stamp-start: "def\\\\texinfoversion{"
-@c time-stamp-format: "%:y-%02m-%02d"
+@c time-stamp-format: "%:y-%02m-%02d.%H"
@c time-stamp-end: "}"
@c End:
projects / platform / upstream / glibc.git / commitdiff