[ARM] pxa: Stargate 2 board support
authorJonathan Cameron <jic23@cam.ac.uk>
Sat, 16 May 2009 18:20:39 +0000 (18:20 +0000)
committerEric Miao <eric.y.miao@gmail.com>
Fri, 5 Jun 2009 02:46:17 +0000 (10:46 +0800)
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
arch/arm/mach-pxa/Kconfig
arch/arm/mach-pxa/Makefile
arch/arm/mach-pxa/include/mach/uncompress.h
arch/arm/mach-pxa/stargate2.c [new file with mode: 0644]

index a911bc9..2e45630 100644 (file)
@@ -51,6 +51,12 @@ config MACH_INTELMOTE2
        select IWMMXT
        select PXA_HAVE_BOARD_IRQS
 
+config MACH_STARGATE2
+       bool "Intel Stargate 2 Platform"
+       select PXA27x
+       select IWMMXT
+       select PXA_HAVE_BOARD_IRQS
+
 config ARCH_LUBBOCK
        bool "Intel DBPXA250 Development Platform"
        select PXA25x
index e950c40..d18ffef 100644 (file)
@@ -78,6 +78,7 @@ obj-$(CONFIG_MACH_CM_X300)      += cm-x300.o
 obj-$(CONFIG_PXA_EZX)           += ezx.o
 
 obj-$(CONFIG_MACH_INTELMOTE2)   += imote2.o
+obj-$(CONFIG_MACH_STARGATE2)   += stargate2.o
 obj-$(CONFIG_MACH_CSB726)      += csb726.o
 obj-$(CONFIG_CSB726_CSB701)    += csb701.o
 
index 5706cea..c6cfd7c 100644 (file)
@@ -36,7 +36,7 @@ static inline void flush(void)
 static inline void arch_decomp_setup(void)
 {
        if (machine_is_littleton() || machine_is_intelmote2()
-                       || machine_is_csb726())
+           || machine_is_csb726() || machine_is_stargate2())
                UART = STUART;
 }
 
diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c
new file mode 100644 (file)
index 0000000..3b205b6
--- /dev/null
@@ -0,0 +1,796 @@
+/*
+ *  linux/arch/arm/mach-pxa/stargate2.c
+ *
+ *  Author:    Ed C. Epp
+ *  Created:   Nov 05, 2002
+ *  Copyright: Intel Corp.
+ *
+ *  Modified 2009:  Jonathan Cameron <jic23@cam.ac.uk>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/bitops.h>
+#include <linux/fb.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/machine.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/plat-ram.h>
+#include <linux/mtd/partitions.h>
+
+#include <linux/i2c/pcf857x.h>
+#include <linux/i2c/at24.h>
+#include <linux/smc91x.h>
+#include <linux/gpio.h>
+
+#include <asm/types.h>
+#include <asm/setup.h>
+#include <asm/memory.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/flash.h>
+
+#include <mach/pxa27x.h>
+#include <plat/i2c.h>
+#include <mach/mmc.h>
+#include <mach/udc.h>
+#include <mach/pxa2xx_spi.h>
+#include <mach/pxa27x-udc.h>
+
+#include <linux/spi/spi.h>
+#include <linux/mfd/da903x.h>
+#include <linux/sht15.h>
+
+#include "devices.h"
+#include "generic.h"
+
+/* Bluetooth */
+#define SG2_BT_RESET           81
+
+/* SD */
+#define SG2_GPIO_nSD_DETECT    90
+#define SG2_SD_POWER_ENABLE    89
+
+static unsigned long stargate2_pin_config[] __initdata = {
+
+       GPIO15_nCS_1, /* SRAM */
+       /* SMC91x */
+       GPIO80_nCS_4,
+       GPIO40_GPIO, /*cable detect?*/
+       /* Device Identification for wakeup*/
+       GPIO102_GPIO,
+
+       /* Button */
+       GPIO91_GPIO | WAKEUP_ON_LEVEL_HIGH,
+
+       /* DA9030 */
+       GPIO1_GPIO,
+
+       /* Compact Flash */
+       GPIO79_PSKTSEL,
+       GPIO48_nPOE,
+       GPIO49_nPWE,
+       GPIO50_nPIOR,
+       GPIO51_nPIOW,
+       GPIO85_nPCE_1,
+       GPIO54_nPCE_2,
+       GPIO55_nPREG,
+       GPIO56_nPWAIT,
+       GPIO57_nIOIS16,
+       GPIO120_GPIO, /* Buff ctrl */
+       GPIO108_GPIO, /* Power ctrl */
+       GPIO82_GPIO, /* Reset */
+       GPIO53_GPIO, /* SG2_S0_GPIO_DETECT */
+
+       /* MMC */
+       GPIO32_MMC_CLK,
+       GPIO112_MMC_CMD,
+       GPIO92_MMC_DAT_0,
+       GPIO109_MMC_DAT_1,
+       GPIO110_MMC_DAT_2,
+       GPIO111_MMC_DAT_3,
+       GPIO90_GPIO, /* nSD detect */
+       GPIO89_GPIO, /* SD_POWER_ENABLE */
+
+       /* Bluetooth */
+       GPIO81_GPIO, /* reset */
+
+       /* cc2420 802.15.4 radio */
+       GPIO22_GPIO,            /* CC_RSTN  (out)*/
+       GPIO114_GPIO,           /* CC_FIFO (in) */
+       GPIO116_GPIO,           /* CC_CCA (in) */
+       GPIO0_GPIO,             /* CC_FIFOP (in) */
+       GPIO16_GPIO,            /* CCSFD (in) */
+       GPIO39_GPIO,            /* CSn (out) */
+
+       /* I2C */
+       GPIO117_I2C_SCL,
+       GPIO118_I2C_SDA,
+
+       /* SSP 3 - 802.15.4 radio */
+       GPIO39_GPIO, /* chip select */
+       GPIO34_SSP3_SCLK,
+       GPIO35_SSP3_TXD,
+       GPIO41_SSP3_RXD,
+
+       /* SSP 2 */
+       GPIO11_SSP2_RXD,
+       GPIO38_SSP2_TXD,
+       GPIO36_SSP2_SCLK,
+       GPIO37_GPIO, /* chip select */
+
+       /* SSP 1 */
+       GPIO26_SSP1_RXD,
+       GPIO25_SSP1_TXD,
+       GPIO23_SSP1_SCLK,
+       GPIO24_GPIO, /* chip select */
+
+       /* BTUART */
+       GPIO42_BTUART_RXD,
+       GPIO43_BTUART_TXD,
+       GPIO44_BTUART_CTS,
+       GPIO45_BTUART_RTS,
+
+       /* STUART */
+       GPIO46_STUART_RXD,
+       GPIO47_STUART_TXD,
+
+       /* Basic sensor board */
+       GPIO96_GPIO,    /* accelerometer interrupt */
+       GPIO99_GPIO,    /* ADC interrupt */
+
+       /* Connector pins specified as gpios */
+       GPIO94_GPIO, /* large basic connector pin 14 */
+       GPIO10_GPIO, /* large basic connector pin 23 */
+
+       /* SHT15 */
+       GPIO100_GPIO,
+       GPIO98_GPIO,
+};
+
+/**
+ * stargate2_reset_bluetooth() reset the bluecore to ensure consistent state
+ **/
+static int stargate2_reset_bluetooth(void)
+{
+       int err;
+       err = gpio_request(SG2_BT_RESET, "SG2_BT_RESET");
+       if (err) {
+               printk(KERN_ERR "Could not get gpio for bluetooth reset \n");
+               return err;
+       }
+       gpio_direction_output(SG2_BT_RESET, 1);
+       mdelay(5);
+       /* now reset it - 5 msec minimum */
+       gpio_set_value(SG2_BT_RESET, 0);
+       mdelay(10);
+       gpio_set_value(SG2_BT_RESET, 1);
+       gpio_free(SG2_BT_RESET);
+       return 0;
+}
+
+static struct led_info stargate2_leds[] = {
+       {
+               .name = "sg2:red",
+               .flags = DA9030_LED_RATE_ON,
+       }, {
+               .name = "sg2:blue",
+               .flags = DA9030_LED_RATE_ON,
+       }, {
+               .name = "sg2:green",
+               .flags = DA9030_LED_RATE_ON,
+       },
+};
+
+static struct sht15_platform_data platform_data_sht15 = {
+       .gpio_data =  100,
+       .gpio_sck  =  98,
+};
+
+static struct platform_device sht15 = {
+       .name = "sht15",
+       .id = -1,
+       .dev = {
+               .platform_data = &platform_data_sht15,
+       },
+};
+
+static struct regulator_consumer_supply stargate2_sensor_3_con[] = {
+       {
+               .dev = &sht15.dev,
+               .supply = "vcc",
+       },
+};
+
+enum stargate2_ldos{
+       vcc_vref,
+       vcc_cc2420,
+       /* a mote connector? */
+       vcc_mica,
+       /* the CSR bluecore chip */
+       vcc_bt,
+       /* The two voltages available to sensor boards */
+       vcc_sensor_1_8,
+       vcc_sensor_3,
+       /* directly connected to the pxa27x */
+       vcc_sram_ext,
+       vcc_pxa_pll,
+       vcc_pxa_usim, /* Reference voltage for certain gpios */
+       vcc_pxa_mem,
+       vcc_pxa_flash,
+       vcc_pxa_core, /*Dc-Dc buck not yet supported */
+       vcc_lcd,
+       vcc_bb,
+       vcc_bbio, /*not sure!*/
+       vcc_io, /* cc2420 802.15.4 radio and pxa vcc_io ?*/
+};
+
+/* The values of the various regulator constraints are obviously dependent
+ * on exactly what is wired to each ldo.  Unfortunately this information is
+ * not generally available.  More information has been requested from Xbow.
+ */
+static struct regulator_init_data stargate2_ldo_init_data[] = {
+       [vcc_bbio] = {
+               .constraints = { /* board default 1.8V */
+                       .name = "vcc_bbio",
+                       .min_uV = 1800000,
+                       .max_uV = 1800000,
+               },
+       },
+       [vcc_bb] = {
+               .constraints = { /* board default 2.8V */
+                       .name = "vcc_bb",
+                       .min_uV = 2700000,
+                       .max_uV = 3000000,
+               },
+       },
+       [vcc_pxa_flash] = {
+               .constraints = {/* default is 1.8V */
+                       .name = "vcc_pxa_flash",
+                       .min_uV = 1800000,
+                       .max_uV = 1800000,
+               },
+       },
+       [vcc_cc2420] = { /* also vcc_io */
+               .constraints = {
+                       /* board default is 2.8V */
+                       .name = "vcc_cc2420",
+                       .min_uV = 2700000,
+                       .max_uV = 3300000,
+               },
+       },
+       [vcc_vref] = { /* Reference for what? */
+               .constraints = { /* default 1.8V */
+                       .name = "vcc_vref",
+                       .min_uV = 1800000,
+                       .max_uV = 1800000,
+               },
+       },
+       [vcc_sram_ext] = {
+               .constraints = { /* default 2.8V */
+                       .name = "vcc_sram_ext",
+                       .min_uV = 2800000,
+                       .max_uV = 2800000,
+               },
+       },
+       [vcc_mica] = {
+               .constraints = { /* default 2.8V */
+                       .name = "vcc_mica",
+                       .min_uV = 2800000,
+                       .max_uV = 2800000,
+               },
+       },
+       [vcc_bt] = {
+               .constraints = { /* default 2.8V */
+                       .name = "vcc_bt",
+                       .min_uV = 2800000,
+                       .max_uV = 2800000,
+               },
+       },
+       [vcc_lcd] = {
+               .constraints = { /* default 2.8V */
+                       .name = "vcc_lcd",
+                       .min_uV = 2700000,
+                       .max_uV = 3300000,
+               },
+       },
+       [vcc_io] = { /* Same or higher than everything
+                         * bar vccbat and vccusb */
+               .constraints = { /* default 2.8V */
+                       .name = "vcc_io",
+                       .min_uV = 2692000,
+                       .max_uV = 3300000,
+               },
+       },
+       [vcc_sensor_1_8] = {
+               .constraints = { /* default 1.8V */
+                       .name = "vcc_sensor_1_8",
+                       .min_uV = 1800000,
+                       .max_uV = 1800000,
+               },
+       },
+       [vcc_sensor_3] = { /* curiously default 2.8V */
+               .constraints = {
+                       .name = "vcc_sensor_3",
+                       .min_uV = 2800000,
+                       .max_uV = 3000000,
+               },
+               .num_consumer_supplies = ARRAY_SIZE(stargate2_sensor_3_con),
+               .consumer_supplies = stargate2_sensor_3_con,
+       },
+       [vcc_pxa_pll] = { /* 1.17V - 1.43V, default 1.3V*/
+               .constraints = {
+                       .name = "vcc_pxa_pll",
+                       .min_uV = 1170000,
+                       .max_uV = 1430000,
+               },
+       },
+       [vcc_pxa_usim] = {
+               .constraints = { /* default 1.8V */
+                       .name = "vcc_pxa_usim",
+                       .min_uV = 1710000,
+                       .max_uV = 2160000,
+               },
+       },
+       [vcc_pxa_mem] = {
+               .constraints = { /* default 1.8V */
+                       .name = "vcc_pxa_mem",
+                       .min_uV = 1800000,
+                       .max_uV = 1800000,
+               },
+       },
+};
+
+static struct da903x_subdev_info stargate2_da9030_subdevs[] = {
+       {
+               .name = "da903x-led",
+               .id = DA9030_ID_LED_2,
+               .platform_data = &stargate2_leds[0],
+       }, {
+               .name = "da903x-led",
+               .id = DA9030_ID_LED_3,
+               .platform_data = &stargate2_leds[2],
+       }, {
+               .name = "da903x-led",
+               .id = DA9030_ID_LED_4,
+               .platform_data = &stargate2_leds[1],
+       }, {
+               .name = "da903x-regulator",
+               .id = DA9030_ID_LDO2,
+               .platform_data = &stargate2_ldo_init_data[vcc_bbio],
+       }, {
+               .name = "da903x-regulator",
+               .id = DA9030_ID_LDO3,
+               .platform_data = &stargate2_ldo_init_data[vcc_bb],
+       }, {
+               .name = "da903x-regulator",
+               .id = DA9030_ID_LDO4,
+               .platform_data = &stargate2_ldo_init_data[vcc_pxa_flash],
+       }, {
+               .name = "da903x-regulator",
+               .id = DA9030_ID_LDO5,
+               .platform_data = &stargate2_ldo_init_data[vcc_cc2420],
+       }, {
+               .name = "da903x-regulator",
+               .id = DA9030_ID_LDO6,
+               .platform_data = &stargate2_ldo_init_data[vcc_vref],
+       }, {
+               .name = "da903x-regulator",
+               .id = DA9030_ID_LDO7,
+               .platform_data = &stargate2_ldo_init_data[vcc_sram_ext],
+       }, {
+               .name = "da903x-regulator",
+               .id = DA9030_ID_LDO8,
+               .platform_data = &stargate2_ldo_init_data[vcc_mica],
+       }, {
+               .name = "da903x-regulator",
+               .id = DA9030_ID_LDO9,
+               .platform_data = &stargate2_ldo_init_data[vcc_bt],
+       }, {
+               .name = "da903x-regulator",
+               .id = DA9030_ID_LDO10,
+               .platform_data = &stargate2_ldo_init_data[vcc_sensor_1_8],
+       }, {
+               .name = "da903x-regulator",
+               .id = DA9030_ID_LDO11,
+               .platform_data = &stargate2_ldo_init_data[vcc_sensor_3],
+       }, {
+               .name = "da903x-regulator",
+               .id = DA9030_ID_LDO12,
+               .platform_data = &stargate2_ldo_init_data[vcc_lcd],
+       }, {
+               .name = "da903x-regulator",
+               .id = DA9030_ID_LDO15,
+               .platform_data = &stargate2_ldo_init_data[vcc_pxa_pll],
+       }, {
+               .name = "da903x-regulator",
+               .id = DA9030_ID_LDO17,
+               .platform_data = &stargate2_ldo_init_data[vcc_pxa_usim],
+       }, {
+               .name = "da903x-regulator", /*pxa vcc i/o and cc2420 vcc i/o */
+               .id = DA9030_ID_LDO18,
+               .platform_data = &stargate2_ldo_init_data[vcc_io],
+       }, {
+               .name = "da903x-regulator",
+               .id = DA9030_ID_LDO19,
+               .platform_data = &stargate2_ldo_init_data[vcc_pxa_mem],
+       },
+};
+
+static struct da903x_platform_data stargate2_da9030_pdata = {
+       .num_subdevs = ARRAY_SIZE(stargate2_da9030_subdevs),
+       .subdevs = stargate2_da9030_subdevs,
+};
+
+static struct resource smc91x_resources[] = {
+       [0] = {
+               .name = "smc91x-regs",
+               .start = (PXA_CS4_PHYS + 0x300),
+               .end = (PXA_CS4_PHYS + 0xfffff),
+               .flags = IORESOURCE_MEM,
+       },
+       [1] = {
+               .start = IRQ_GPIO(40),
+               .end = IRQ_GPIO(40),
+               .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+       }
+};
+
+static struct smc91x_platdata stargate2_smc91x_info = {
+       .flags = SMC91X_USE_8BIT | SMC91X_USE_16BIT | SMC91X_USE_32BIT
+       | SMC91X_NOWAIT | SMC91X_USE_DMA,
+};
+
+static struct platform_device smc91x_device = {
+       .name = "smc91x",
+       .id = -1,
+       .num_resources = ARRAY_SIZE(smc91x_resources),
+       .resource = smc91x_resources,
+       .dev = {
+               .platform_data = &stargate2_smc91x_info,
+       },
+};
+
+
+
+static struct pxamci_platform_data stargate2_mci_platform_data;
+
+/*
+ * The card detect interrupt isn't debounced so we delay it by 250ms
+ * to give the card a chance to fully insert / eject.
+ */
+static int stargate2_mci_init(struct device *dev,
+                             irq_handler_t stargate2_detect_int,
+                             void *data)
+{
+       int err;
+
+       err = gpio_request(SG2_SD_POWER_ENABLE, "SG2_sd_power_enable");
+       if (err) {
+               printk(KERN_ERR "Can't get the gpio for SD power control");
+               goto return_err;
+       }
+       gpio_direction_output(SG2_SD_POWER_ENABLE, 0);
+
+       err = gpio_request(SG2_GPIO_nSD_DETECT, "SG2_sd_detect");
+       if (err) {
+               printk(KERN_ERR "Can't get the sd detect gpio");
+               goto free_power_en;
+       }
+       gpio_direction_input(SG2_GPIO_nSD_DETECT);
+       /* Delay to allow for full insertion */
+       stargate2_mci_platform_data.detect_delay = msecs_to_jiffies(250);
+
+       err = request_irq(IRQ_GPIO(SG2_GPIO_nSD_DETECT),
+                         stargate2_detect_int,
+                         IRQ_TYPE_EDGE_BOTH,
+                         "MMC card detect",
+                         data);
+       if (err) {
+               printk(KERN_ERR "can't request MMC card detect IRQ\n");
+               goto free_nsd_detect;
+       }
+       return 0;
+
+ free_nsd_detect:
+       gpio_free(SG2_GPIO_nSD_DETECT);
+ free_power_en:
+       gpio_free(SG2_SD_POWER_ENABLE);
+ return_err:
+       return err;
+}
+
+/**
+ * stargate2_mci_setpower() - set state of mmc power supply
+ *
+ * Very simple control. Either it is on or off and is controlled by
+ * a gpio pin */
+static void stargate2_mci_setpower(struct device *dev, unsigned int vdd)
+{
+       gpio_set_value(SG2_SD_POWER_ENABLE, !!vdd);
+}
+
+static void stargate2_mci_exit(struct device *dev, void *data)
+{
+       free_irq(IRQ_GPIO(SG2_GPIO_nSD_DETECT), data);
+       gpio_free(SG2_SD_POWER_ENABLE);
+       gpio_free(SG2_GPIO_nSD_DETECT);
+}
+
+static struct pxamci_platform_data stargate2_mci_platform_data = {
+       .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
+       .init = stargate2_mci_init,
+       .setpower = stargate2_mci_setpower,
+       .exit = stargate2_mci_exit,
+};
+
+static struct mtd_partition stargate2flash_partitions[] = {
+       {
+               .name = "Bootloader",
+               .size = 0x00040000,
+               .offset = 0,
+               .mask_flags = 0,
+       }, {
+               .name = "Kernel",
+               .size = 0x00200000,
+               .offset = 0x00040000,
+               .mask_flags = 0
+       }, {
+               .name = "Filesystem",
+               .size = 0x01DC0000,
+               .offset = 0x00240000,
+               .mask_flags = 0
+       },
+};
+
+static struct resource flash_resources = {
+       .start = PXA_CS0_PHYS,
+       .end = PXA_CS0_PHYS + SZ_32M - 1,
+       .flags = IORESOURCE_MEM,
+};
+
+static struct flash_platform_data stargate2_flash_data = {
+       .map_name = "cfi_probe",
+       .parts = stargate2flash_partitions,
+       .nr_parts = ARRAY_SIZE(stargate2flash_partitions),
+       .name = "PXA27xOnChipROM",
+       .width = 2,
+};
+
+static struct platform_device stargate2_flash_device = {
+       .name = "pxa2xx-flash",
+       .id = 0,
+       .dev = {
+               .platform_data = &stargate2_flash_data,
+       },
+       .resource = &flash_resources,
+       .num_resources = 1,
+};
+
+/*
+ * SRAM - The Stargate 2 has 32MB of SRAM.
+ *
+ * Here it is made available as an MTD. This will then
+ * typically have a cifs filesystem created on it to provide
+ * fast temporary storage.
+ */
+static struct resource sram_resources = {
+       .start = PXA_CS1_PHYS,
+       .end = PXA_CS1_PHYS + SZ_32M-1,
+       .flags = IORESOURCE_MEM,
+};
+
+static struct platdata_mtd_ram stargate2_sram_pdata = {
+       .mapname = "Stargate2 SRAM",
+       .bankwidth = 2,
+};
+
+static struct platform_device stargate2_sram = {
+       .name = "mtd-ram",
+       .id = 0,
+       .resource = &sram_resources,
+       .num_resources = 1,
+       .dev = {
+               .platform_data = &stargate2_sram_pdata,
+       },
+};
+
+static struct pcf857x_platform_data platform_data_pcf857x = {
+       .gpio_base = 128,
+       .n_latch = 0,
+       .setup = NULL,
+       .teardown = NULL,
+       .context = NULL,
+};
+
+static struct at24_platform_data pca9500_eeprom_pdata = {
+       .byte_len = 256,
+       .page_size = 4,
+};
+
+
+static struct i2c_board_info __initdata stargate2_i2c_board_info[] = {
+       /* Techically this a pca9500 - but it's compatible with the 8574
+        * for gpio expansion and the 24c02 for eeprom access.
+        */
+       {
+               .type = "pcf8574",
+               .addr =  0x27,
+               .platform_data = &platform_data_pcf857x,
+       }, {
+               .type = "24c02",
+               .addr = 0x57,
+               .platform_data = &pca9500_eeprom_pdata,
+       }, {
+               .type = "max1238",
+               .addr = 0x35,
+       }, { /* ITS400 Sensor board only */
+               .type = "max1363",
+               .addr = 0x34,
+               /* Through a nand gate - Also beware, on V2 sensor board the
+                * pull up resistors are missing.
+                */
+               .irq = IRQ_GPIO(99),
+       }, { /* ITS400 Sensor board only */
+               .type = "tsl2561",
+               .addr = 0x49,
+               /* Through a nand gate - Also beware, on V2 sensor board the
+                * pull up resistors are missing.
+                */
+               .irq = IRQ_GPIO(99),
+       }, { /* ITS400 Sensor board only */
+               .type = "tmp175",
+               .addr = 0x4A,
+               .irq = IRQ_GPIO(96),
+       },
+};
+
+static struct i2c_board_info __initdata stargate2_pwr_i2c_board_info[] = {
+       {
+               .type = "da9030",
+               .addr = 0x49,
+               .platform_data = &stargate2_da9030_pdata,
+               .irq = gpio_to_irq(1),
+       },
+};
+
+static struct pxa2xx_spi_master pxa_ssp_master_0_info = {
+       .num_chipselect = 1,
+};
+
+static struct pxa2xx_spi_master pxa_ssp_master_1_info = {
+       .num_chipselect = 1,
+};
+
+static struct pxa2xx_spi_master pxa_ssp_master_2_info = {
+       .num_chipselect = 1,
+};
+
+/* An upcoming kernel change will scrap SFRM usage so these
+ * drivers have been moved to use gpio's via cs_control */
+static struct pxa2xx_spi_chip staccel_chip_info = {
+       .tx_threshold = 8,
+       .rx_threshold = 8,
+       .dma_burst_size = 8,
+       .timeout = 235,
+       .gpio_cs = 24,
+};
+
+static struct pxa2xx_spi_chip cc2420_info = {
+       .tx_threshold = 8,
+       .rx_threshold = 8,
+       .dma_burst_size = 8,
+       .timeout = 235,
+       .gpio_cs = 39,
+};
+
+static struct spi_board_info spi_board_info[] __initdata = {
+       {
+               .modalias = "lis3l02dq",
+               .max_speed_hz = 8000000,/* 8MHz max spi frequency at 3V */
+               .bus_num = 1,
+               .chip_select = 0,
+               .controller_data = &staccel_chip_info,
+               .irq = IRQ_GPIO(96),
+       }, {
+               .modalias = "cc2420",
+               .max_speed_hz = 6500000,
+               .bus_num = 3,
+               .chip_select = 0,
+               .controller_data = &cc2420_info,
+       },
+};
+
+static void sg2_udc_command(int cmd)
+{
+       switch (cmd) {
+       case PXA2XX_UDC_CMD_CONNECT:
+               UP2OCR |=  UP2OCR_HXOE  | UP2OCR_DPPUE | UP2OCR_DPPUBE;
+               break;
+       case PXA2XX_UDC_CMD_DISCONNECT:
+               UP2OCR &= ~(UP2OCR_HXOE  | UP2OCR_DPPUE | UP2OCR_DPPUBE);
+               break;
+       }
+}
+
+/* Board doesn't support cable detection - so always lie and say
+ * something is there.
+ */
+static int sg2_udc_detect(void)
+{
+       return 1;
+}
+
+static struct pxa2xx_udc_mach_info stargate2_udc_info __initdata = {
+       .udc_is_connected       = sg2_udc_detect,
+       .udc_command            = sg2_udc_command,
+};
+
+static struct platform_device *stargate2_devices[] = {
+       &stargate2_flash_device,
+       &stargate2_sram,
+       &smc91x_device,
+       &sht15,
+};
+
+static struct i2c_pxa_platform_data i2c_pwr_pdata = {
+       .fast_mode = 1,
+};
+
+static struct i2c_pxa_platform_data i2c_pdata = {
+       .fast_mode = 1,
+};
+
+static void __init stargate2_init(void)
+{
+       /* This is probably a board specific hack as this must be set
+          prior to connecting the MFP stuff up. */
+       MECR &= ~MECR_NOS;
+
+       pxa2xx_mfp_config(ARRAY_AND_SIZE(stargate2_pin_config));
+
+       /* spi chip selects */
+       gpio_direction_output(37, 0);
+       gpio_direction_output(24, 0);
+       gpio_direction_output(39, 0);
+
+       platform_add_devices(ARRAY_AND_SIZE(stargate2_devices));
+
+       pxa2xx_set_spi_info(1, &pxa_ssp_master_0_info);
+       pxa2xx_set_spi_info(2, &pxa_ssp_master_1_info);
+       pxa2xx_set_spi_info(3, &pxa_ssp_master_2_info);
+       spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
+
+       i2c_register_board_info(0, ARRAY_AND_SIZE(stargate2_i2c_board_info));
+       i2c_register_board_info(1,
+                               ARRAY_AND_SIZE(stargate2_pwr_i2c_board_info));
+       pxa27x_set_i2c_power_info(&i2c_pwr_pdata);
+       pxa_set_i2c_info(&i2c_pdata);
+
+       pxa_set_mci_info(&stargate2_mci_platform_data);
+
+       pxa_set_udc_info(&stargate2_udc_info);
+
+       stargate2_reset_bluetooth();
+}
+
+MACHINE_START(STARGATE2, "Stargate 2")
+       .phys_io = 0x40000000,
+       .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+       .map_io = pxa_map_io,
+       .init_irq = pxa27x_init_irq,
+       .timer = &pxa_timer,
+       .init_machine = stargate2_init,
+       .boot_params = 0xA0000100,
+MACHINE_END