sunxi: power: Make all voltages configurable through Kconfig
authorHans de Goede <hdegoede@redhat.com>
Wed, 30 Sep 2015 13:22:42 +0000 (15:22 +0200)
committerHans de Goede <hdegoede@redhat.com>
Tue, 20 Oct 2015 16:40:27 +0000 (18:40 +0200)
On boards with axp221/223 pmic-s we already allow configuring most
voltages. Make the Kconfig options for these also apply to boards with
axp152 / axp209 pmic-s and extend them to configure all voltages.

The Kconfig defaults are chosen so that this commit does not introduce any
functional changes.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
16 files changed:
board/sunxi/board.c
configs/CSQ_CS908_defconfig
configs/Colombus_defconfig
configs/Hummingbird_A31_defconfig
configs/MSI_Primo81_defconfig
configs/Mele_A1000G_quad_defconfig
configs/Mele_I7_defconfig
configs/Mele_M9_defconfig
configs/Sinlinx_SinA33_defconfig
configs/ga10h_v1_1_defconfig
configs/gt90h_v4_defconfig
configs/mixtile_loftq_defconfig
configs/q8_a23_tablet_800x480_defconfig
configs/q8_a33_tablet_1024x600_defconfig
configs/q8_a33_tablet_800x480_defconfig
drivers/power/Kconfig

index 096d127..55a880e 100644 (file)
@@ -440,36 +440,36 @@ void sunxi_board_init(void)
 
 #ifdef CONFIG_AXP152_POWER
        power_failed = axp152_init();
-       power_failed |= axp152_set_dcdc2(1400);
-       power_failed |= axp152_set_dcdc3(1500);
-       power_failed |= axp152_set_dcdc4(1250);
-       power_failed |= axp152_set_ldo2(3000);
+       power_failed |= axp152_set_dcdc2(CONFIG_AXP_DCDC2_VOLT);
+       power_failed |= axp152_set_dcdc3(CONFIG_AXP_DCDC3_VOLT);
+       power_failed |= axp152_set_dcdc4(CONFIG_AXP_DCDC4_VOLT);
+       power_failed |= axp152_set_ldo2(CONFIG_AXP_ALDO2_VOLT);
 #endif
 #ifdef CONFIG_AXP209_POWER
        power_failed |= axp209_init();
-       power_failed |= axp209_set_dcdc2(1400);
-       power_failed |= axp209_set_dcdc3(1250);
-       power_failed |= axp209_set_ldo2(3000);
-       power_failed |= axp209_set_ldo3(2800);
-       power_failed |= axp209_set_ldo4(2800);
+       power_failed |= axp209_set_dcdc2(CONFIG_AXP_DCDC2_VOLT);
+       power_failed |= axp209_set_dcdc3(CONFIG_AXP_DCDC3_VOLT);
+       power_failed |= axp209_set_ldo2(CONFIG_AXP_ALDO2_VOLT);
+       power_failed |= axp209_set_ldo3(CONFIG_AXP_ALDO3_VOLT);
+       power_failed |= axp209_set_ldo4(CONFIG_AXP_ALDO4_VOLT);
 #endif
 #ifdef CONFIG_AXP221_POWER
        power_failed = axp221_init();
-       power_failed |= axp221_set_dcdc1(CONFIG_AXP221_DCDC1_VOLT);
-       power_failed |= axp221_set_dcdc2(CONFIG_AXP221_DCDC2_VOLT);
-       power_failed |= axp221_set_dcdc3(1200); /* VDD-CPU */
-#ifdef CONFIG_MACH_SUN6I
-       power_failed |= axp221_set_dcdc4(1200); /* A31:VDD-SYS */
-#else
-       power_failed |= axp221_set_dcdc4(0);    /* A23:unused */
-#endif
-       power_failed |= axp221_set_dcdc5(1500); /* VCC-DRAM */
-       power_failed |= axp221_set_dldo1(CONFIG_AXP221_DLDO1_VOLT);
-       power_failed |= axp221_set_dldo4(CONFIG_AXP221_DLDO4_VOLT);
-       power_failed |= axp221_set_aldo1(CONFIG_AXP221_ALDO1_VOLT);
-       power_failed |= axp221_set_aldo2(CONFIG_AXP221_ALDO2_VOLT);
-       power_failed |= axp221_set_aldo3(CONFIG_AXP221_ALDO3_VOLT);
-       power_failed |= axp221_set_eldo(3, CONFIG_AXP221_ELDO3_VOLT);
+       power_failed |= axp221_set_dcdc1(CONFIG_AXP_DCDC1_VOLT);
+       power_failed |= axp221_set_dcdc2(CONFIG_AXP_DCDC2_VOLT);
+       power_failed |= axp221_set_dcdc3(CONFIG_AXP_DCDC3_VOLT);
+       power_failed |= axp221_set_dcdc4(CONFIG_AXP_DCDC4_VOLT);
+       power_failed |= axp221_set_dcdc5(CONFIG_AXP_DCDC5_VOLT);
+       power_failed |= axp221_set_aldo1(CONFIG_AXP_ALDO1_VOLT);
+       power_failed |= axp221_set_aldo2(CONFIG_AXP_ALDO2_VOLT);
+       power_failed |= axp221_set_aldo3(CONFIG_AXP_ALDO3_VOLT);
+       power_failed |= axp221_set_dldo1(CONFIG_AXP_DLDO1_VOLT);
+       power_failed |= axp221_set_dldo2(CONFIG_AXP_DLDO2_VOLT);
+       power_failed |= axp221_set_dldo3(CONFIG_AXP_DLDO3_VOLT);
+       power_failed |= axp221_set_dldo4(CONFIG_AXP_DLDO4_VOLT);
+       power_failed |= axp221_set_eldo(1, CONFIG_AXP_ELDO1_VOLT);
+       power_failed |= axp221_set_eldo(2, CONFIG_AXP_ELDO2_VOLT);
+       power_failed |= axp221_set_eldo(3, CONFIG_AXP_ELDO3_VOLT);
 #endif
 
        printf("DRAM:");
index 7c8eca8..3ffd34e 100644 (file)
@@ -12,7 +12,7 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC"
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
 CONFIG_ETH_DESIGNWARE=y
-CONFIG_AXP221_DLDO1_VOLT=3300
-CONFIG_AXP221_ALDO1_VOLT=3300
+CONFIG_AXP_DLDO1_VOLT=3300
+CONFIG_AXP_ALDO1_VOLT=3300
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_MUSB_HOST=y
index 35f644a..d680df1 100644 (file)
@@ -22,6 +22,6 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII"
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
 CONFIG_ETH_DESIGNWARE=y
-CONFIG_AXP221_ALDO1_VOLT=3300
-CONFIG_AXP221_ELDO3_VOLT=1800
+CONFIG_AXP_ALDO1_VOLT=3300
+CONFIG_AXP_ELDO3_VOLT=1800
 CONFIG_USB_EHCI_HCD=y
index 35c746c..02bcdbf 100644 (file)
@@ -14,5 +14,5 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPA(21)"
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
 CONFIG_ETH_DESIGNWARE=y
-CONFIG_AXP221_ALDO1_VOLT=3300
+CONFIG_AXP_ALDO1_VOLT=3300
 CONFIG_USB_EHCI_HCD=y
index 9d667b7..3d71bf5 100644 (file)
@@ -16,7 +16,7 @@ CONFIG_SPL=y
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
-CONFIG_AXP221_DLDO1_VOLT=3300
+CONFIG_AXP_DLDO1_VOLT=3300
 CONFIG_USB_MUSB_HOST=y
 CONFIG_VIDEO_LCD_SSD2828_TX_CLK=27
 CONFIG_VIDEO_LCD_SSD2828_RESET="PA26"
index 5e31ef6..e81e6b6 100644 (file)
@@ -12,9 +12,9 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC"
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
 CONFIG_ETH_DESIGNWARE=y
-CONFIG_AXP221_DCDC1_VOLT=3300
-CONFIG_AXP221_DLDO1_VOLT=3300
-CONFIG_AXP221_DLDO4_VOLT=3300
-CONFIG_AXP221_ALDO1_VOLT=3300
+CONFIG_AXP_DCDC1_VOLT=3300
+CONFIG_AXP_DLDO1_VOLT=3300
+CONFIG_AXP_DLDO4_VOLT=3300
+CONFIG_AXP_ALDO1_VOLT=3300
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_MUSB_HOST=y
index 774a92f..38cd845 100644 (file)
@@ -12,8 +12,8 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC"
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
 CONFIG_ETH_DESIGNWARE=y
-CONFIG_AXP221_DCDC1_VOLT=3300
-CONFIG_AXP221_DLDO1_VOLT=3300
-CONFIG_AXP221_DLDO4_VOLT=3300
-CONFIG_AXP221_ALDO1_VOLT=3300
+CONFIG_AXP_DCDC1_VOLT=3300
+CONFIG_AXP_DLDO1_VOLT=3300
+CONFIG_AXP_DLDO4_VOLT=3300
+CONFIG_AXP_ALDO1_VOLT=3300
 CONFIG_USB_EHCI_HCD=y
index b52e3c2..93a28a6 100644 (file)
@@ -12,8 +12,8 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC"
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
 CONFIG_ETH_DESIGNWARE=y
-CONFIG_AXP221_DCDC1_VOLT=3300
-CONFIG_AXP221_DLDO1_VOLT=3300
-CONFIG_AXP221_DLDO4_VOLT=3300
-CONFIG_AXP221_ALDO1_VOLT=3300
+CONFIG_AXP_DCDC1_VOLT=3300
+CONFIG_AXP_DLDO1_VOLT=3300
+CONFIG_AXP_DLDO4_VOLT=3300
+CONFIG_AXP_ALDO1_VOLT=3300
 CONFIG_USB_EHCI_HCD=y
index 720f3dc..79fa5bc 100644 (file)
@@ -9,4 +9,4 @@ CONFIG_SPL=y
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
-CONFIG_AXP221_ALDO1_VOLT=3000
+CONFIG_AXP_ALDO1_VOLT=3000
index 417a89c..b288e82 100644 (file)
@@ -21,7 +21,7 @@ CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
-CONFIG_AXP221_DLDO1_VOLT=3300
-CONFIG_AXP221_ALDO1_VOLT=3000
+CONFIG_AXP_DLDO1_VOLT=3300
+CONFIG_AXP_ALDO1_VOLT=3000
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_MUSB_HOST=y
index e9aecc3..e6be718 100644 (file)
@@ -20,7 +20,7 @@ CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
-CONFIG_AXP221_DCDC2_VOLT=1100
-CONFIG_AXP221_DLDO1_VOLT=3300
-CONFIG_AXP221_ALDO1_VOLT=3000
+CONFIG_AXP_DCDC2_VOLT=1100
+CONFIG_AXP_DLDO1_VOLT=3300
+CONFIG_AXP_ALDO1_VOLT=3000
 CONFIG_USB_MUSB_HOST=y
index 26fc4ce..ce81309 100644 (file)
@@ -13,5 +13,5 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPA(21)"
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
 CONFIG_ETH_DESIGNWARE=y
-CONFIG_AXP221_ALDO1_VOLT=3300
+CONFIG_AXP_ALDO1_VOLT=3300
 CONFIG_USB_EHCI_HCD=y
index 3a3afa5..4993fa9 100644 (file)
@@ -20,6 +20,6 @@ CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
-CONFIG_AXP221_DLDO1_VOLT=3300
-CONFIG_AXP221_ALDO1_VOLT=3000
+CONFIG_AXP_DLDO1_VOLT=3300
+CONFIG_AXP_ALDO1_VOLT=3000
 CONFIG_USB_MUSB_HOST=y
index fbbf128..d427966 100644 (file)
@@ -20,6 +20,6 @@ CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
-CONFIG_AXP221_DLDO1_VOLT=3300
-CONFIG_AXP221_ALDO1_VOLT=3000
+CONFIG_AXP_DLDO1_VOLT=3300
+CONFIG_AXP_ALDO1_VOLT=3000
 CONFIG_USB_MUSB_HOST=y
index 8e8aa92..7f5cc47 100644 (file)
@@ -20,6 +20,6 @@ CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
-CONFIG_AXP221_DLDO1_VOLT=3300
-CONFIG_AXP221_ALDO1_VOLT=3000
+CONFIG_AXP_DLDO1_VOLT=3300
+CONFIG_AXP_ALDO1_VOLT=3000
 CONFIG_USB_MUSB_HOST=y
index 37a41a2..befb845 100644 (file)
@@ -38,79 +38,165 @@ config AXP221_POWER
 
 endchoice
 
-config AXP221_DCDC1_VOLT
-       int "axp221 dcdc1 voltage"
+config AXP_DCDC1_VOLT
+       int "axp pmic dcdc1 voltage"
        depends on AXP221_POWER
-       default 3000
+       default 3000 if MACH_SUN6I || MACH_SUN8I
        ---help---
-       Set the voltage (mV) to program the axp221 dcdc1 at, set to 0 to
-       disable dcdc1. This is typically used as generic 3.3V IO voltage for
-       things like GPIO-s, sdcard interfaces, etc. On most boards this is
-       undervolted to 3.0V to safe battery.
+       Set the voltage (mV) to program the axp pmic dcdc1 at, set to 0 to
+       disable dcdc1. On A23 / A31 / A33 (axp221) boards dcdc1 is used for
+       generic 3.3V IO voltage for external devices like the lcd-panal and
+       sdcard interfaces, etc. On most boards dcdc1 is undervolted to 3.0V to
+       safe battery. On A31 devices dcdc1 is also used for VCC-IO.
+
+config AXP_DCDC2_VOLT
+       int "axp pmic dcdc2 voltage"
+       depends on AXP152_POWER || AXP209_POWER || AXP221_POWER
+       default 1400 if AXP152_POWER || AXP209_POWER
+       default 1200 if MACH_SUN6I || MACH_SUN8I
+       ---help---
+       Set the voltage (mV) to program the axp pmic dcdc2 at, set to 0 to
+       disable dcdc2.
+       On A10(s) / A13 / A20 boards dcdc2 is VDD-CPU and should be 1.4V.
+       On A31 boards dcdc2 is used for VDD-GPU and should be 1.2V.
+       On A23/A33 boards dcdc2 is used for VDD-SYS and should be 1.2V.
+
+config AXP_DCDC3_VOLT
+       int "axp pmic dcdc3 voltage"
+       depends on AXP152_POWER || AXP209_POWER || AXP221_POWER
+       default 1500 if AXP152_POWER
+       default 1250 if AXP209_POWER
+       default 1200 if MACH_SUN6I || MACH_SUN8I
+       ---help---
+       Set the voltage (mV) to program the axp pmic dcdc3 at, set to 0 to
+       disable dcdc3.
+       On A10(s) / A13 / A20 boards with an axp209 dcdc3 is VDD-INT-DLL and
+       should be 1.25V.
+       On A10s boards with an axp152 dcdc3 is VCC-DRAM and should be 1.5V.
+       On A23 / A31 / A33 boards dcdc3 is VDD-CPU and should be 1.2V.
+
+config AXP_DCDC4_VOLT
+       int "axp pmic dcdc4 voltage"
+       depends on AXP152_POWER || AXP221_POWER
+       default 1250 if AXP152_POWER
+       default 1200 if MACH_SUN6I
+       default 0 if MACH_SUN8I
+       ---help---
+       Set the voltage (mV) to program the axp pmic dcdc4 at, set to 0 to
+       disable dcdc4.
+       On A10s boards with an axp152 dcdc4 is VDD-INT-DLL and should be 1.25V.
+       On A31 boards dcdc4 is used for VDD-SYS and should be 1.2V.
+       On A23 / A33 boards dcdc4 is unused and should be disabled.
+
+config AXP_DCDC5_VOLT
+       int "axp pmic dcdc5 voltage"
+       depends on AXP221_POWER
+       default 1500 if MACH_SUN6I || MACH_SUN8I
+       ---help---
+       Set the voltage (mV) to program the axp pmic dcdc5 at, set to 0 to
+       disable dcdc5.
+       On A23 / A31 / A33 boards dcdc5 is VCC-DRAM and should be 1.5V.
 
-config AXP221_DCDC2_VOLT
-       int "axp221 dcdc2 voltage"
+config AXP_ALDO1_VOLT
+       int "axp pmic (a)ldo1 voltage"
        depends on AXP221_POWER
-       default 1200
+       default 0
+       ---help---
+       Set the voltage (mV) to program the axp pmic aldo1 at, set to 0 to
+       disable aldo1.
+       On A31 boards aldo1 is often used to power the wifi module.
+       On A23 / A33 boards aldo1 is used for VCC-IO and should be 3.0V.
+
+config AXP_ALDO2_VOLT
+       int "axp pmic (a)ldo2 voltage"
+       depends on AXP152_POWER || AXP209_POWER || AXP221_POWER
+       default 3000 if AXP152_POWER || AXP209_POWER
+       default 0 if MACH_SUN6I
+       default 2500 if MACH_SUN8I
+       ---help---
+       Set the voltage (mV) to program the axp pmic aldo2 at, set to 0 to
+       disable aldo2.
+       On A10(s) / A13 / A20 boards aldo2 is AVCC and should be 3.0V.
+       On A31 boards aldo2 is typically unused and should be disabled.
+       On A31 boards aldo2 may be used for LPDDR2 then it should be 1.8V.
+       On A23 / A33 boards aldo2 is used for VDD-DLL and should be 2.5V.
+
+config AXP_ALDO3_VOLT
+       int "axp pmic (a)ldo3 voltage"
+       depends on AXP209_POWER || AXP221_POWER
+       default 2800 if AXP209_POWER
+       default 3000 if MACH_SUN6I || MACH_SUN8I
+       ---help---
+       Set the voltage (mV) to program the axp pmic aldo3 at, set to 0 to
+       disable aldo3.
+       On A10(s) / A13 / A20 boards aldo3 should be 2.8V.
+       On A23 / A31 / A33 boards aldo3 is VCC-PLL and AVCC and should be 3.0V.
+
+config AXP_ALDO4_VOLT
+       int "axp pmic (a)ldo4 voltage"
+       depends on AXP209_POWER
+       default 2800 if AXP209_POWER
        ---help---
-       Set the voltage (mV) to program the axp221 dcdc2 at, set to 0 to
-       disable dcdc2. On A31 boards this is typically used for VDD-GPU,
-       on A23/A33 for VDD-SYS, this should normally be set to 1.2V.
+       Set the voltage (mV) to program the axp pmic aldo4 at, set to 0 to
+       disable aldo4.
+       On A10(s) / A13 / A20 boards aldo4 should be 2.8V.
 
-config AXP221_DLDO1_VOLT
-       int "axp221 dldo1 voltage"
+config AXP_DLDO1_VOLT
+       int "axp pmic dldo1 voltage"
        depends on AXP221_POWER
        default 0
        ---help---
-       Set the voltage (mV) to program the axp221 dldo1 at, set to 0 to
-       disable dldo1. On sun6i (A31) boards with ethernet this is often used
+       Set the voltage (mV) to program the axp pmic dldo1 at, set to 0 to
+       disable dldo1. On sun6i (A31) boards with ethernet dldo1 is often used
        to power the ethernet phy. On sun8i (A23) boards this is often used to
        power the wifi.
 
-config AXP221_DLDO4_VOLT
-       int "axp221 dldo4 voltage"
+config AXP_DLDO2_VOLT
+       int "axp pmic dldo2 voltage"
        depends on AXP221_POWER
        default 0
        ---help---
-       Set the voltage (mV) to program the axp221 dldo4 at, set to 0 to
-       disable dldo4.
+       Set the voltage (mV) to program the axp pmic dldo2 at, set to 0 to
+       disable dldo2.
 
-config AXP221_ALDO1_VOLT
-       int "axp221 aldo1 voltage"
+config AXP_DLDO3_VOLT
+       int "axp pmic dldo3 voltage"
        depends on AXP221_POWER
        default 0
        ---help---
-       Set the voltage (mV) to program the axp221 aldo1 at, set to 0 to
-       disable aldo1. On sun6i (A31) boards which have a wifi module this is
-       often used to power the wifi module.
+       Set the voltage (mV) to program the axp pmic dldo3 at, set to 0 to
+       disable dldo3.
 
-config AXP221_ALDO2_VOLT
-       int "axp221 aldo2 voltage"
+config AXP_DLDO4_VOLT
+       int "axp pmic dldo4 voltage"
        depends on AXP221_POWER
-       default 0 if MACH_SUN6I
-       default 2500 if MACH_SUN8I
+       default 0
+       ---help---
+       Set the voltage (mV) to program the axp pmic dldo4 at, set to 0 to
+       disable dldo4.
+
+config AXP_ELDO1_VOLT
+       int "axp pmic eldo1 voltage"
+       depends on AXP221_POWER
+       default 0
        ---help---
-       Set the voltage (mV) to program the axp221 aldo2 at, set to 0 to
-       disable aldo2. On sun6i (A31) boards this is typically unused and
-       should be disabled, if it is used for LPDDR2 it should be set to 1.8V.
-       On sun8i (A23) this is typically connected to VDD-DLL and must be set
-       to 2.5V.
+       Set the voltage (mV) to program the axp pmic eldo1 at, set to 0 to
+       disable eldo1.
 
-config AXP221_ALDO3_VOLT
-       int "axp221 aldo3 voltage"
+config AXP_ELDO2_VOLT
+       int "axp pmic eldo2 voltage"
        depends on AXP221_POWER
-       default 3000
+       default 0
        ---help---
-       Set the voltage (mV) to program the axp221 aldo3 at, set to 0 to
-       disable aldo3. This is typically connected to VCC-PLL and AVCC and
-       must be set to 3V.
+       Set the voltage (mV) to program the axp pmic eldo2 at, set to 0 to
+       disable eldo2.
 
-config AXP221_ELDO3_VOLT
-       int "axp221 eldo3 voltage"
+config AXP_ELDO3_VOLT
+       int "axp pmic eldo3 voltage"
        depends on AXP221_POWER
        default 0
        ---help---
-       Set the voltage (mV) to program the axp221 eldo3 at, set to 0 to
+       Set the voltage (mV) to program the axp pmic eldo3 at, set to 0 to
        disable eldo3. On some A31(s) tablets it might be used to supply
        1.2V for the SSD2828 chip (converter of parallel LCD interface
        into MIPI DSI).