e1000e: do not schedule the Tx queue until ready

Start the Tx queue when the interface is brought up in e1000e_up() but do
not schedule the queue until link is up as detected in the watchdog task
which sets netif_carrier_on.

Also flush the descriptors and clean the Tx and Rx rings before resetting
the hardware when bringing the interface down otherwise there is a small
window where the watchdog task can be triggered with netif_carrier_off
and the Tx ring not yet empty which causes an additional and unnecessary
reset.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index c4a23c7..bc99458 100644 (file)
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -3347,7 +3347,7 @@ int e1000e_up(struct e1000_adapter *adapter)
                e1000_configure_msix(adapter);
        e1000_irq_enable(adapter);
 
-       netif_wake_queue(adapter->netdev);
+       netif_start_queue(adapter->netdev);
 
        /* fire a link change interrupt to start the watchdog */
        if (adapter->msix_entries)
@@ -3414,17 +3414,16 @@ void e1000e_down(struct e1000_adapter *adapter)
        e1000e_update_stats(adapter);
        spin_unlock(&adapter->stats64_lock);
 
+       e1000e_flush_descriptors(adapter);
+       e1000_clean_tx_ring(adapter);
+       e1000_clean_rx_ring(adapter);
+
        adapter->link_speed = 0;
        adapter->link_duplex = 0;
 
        if (!pci_channel_offline(adapter->pdev))
                e1000e_reset(adapter);
 
-       e1000e_flush_descriptors(adapter);
-
-       e1000_clean_tx_ring(adapter);
-       e1000_clean_rx_ring(adapter);
-
        /*
         * TODO: for power management, we could drop the link and
         * pci_disable_device here.