Initial revision

CVS patchset: 962
CVS date: 1996/08/19 17:15:47

diff --git a/configure.in b/configure.in
new file mode 100644 (file)
index 0000000..b690c74
--- /dev/null
+++ b/configure.in
@@ -0,0 +1,46 @@
+dnl Process this file with autoconf to produce a configure script.
+AC_INIT(rpm.c)
+
+dnl Checks for programs.
+AC_PROG_GCC_TRADITIONAL
+AC_PROG_INSTALL
+AC_PROG_CPP
+AC_PROG_RANLIB
+
+dnl Checks for libraries.
+AC_CHECK_LIB(intl, gettext, [], AC_MSG_WARN([sorry this package needs libintl.a (from the gettext package)]))
+AC_CHECK_LIB(gdbm, dbminit, [], AC_MSG_WARN([sorry this package needs libgdbm.a (from the gdbm package)]))
+AC_CHECK_LIB(db, dbopen)
+
+ZLIB=
+for zlib in z gz ; do
+   AC_CHECK_LIB(${zlib}, gzread, 
+       [ZLIB="-l${zlib}"; break], 
+       [if test ${zlib} = gz; then 
+           AC_MSG_WARN([sorry this package needs libz.a or libgz.a (from the zlib package)]) 
+        fi]
+              )
+done
+AC_SUBST(ZLIB)
+
+
+dnl Checks for header files.
+AC_HEADER_STDC
+AC_CHECK_HEADERS(sys/socket.h ftw.h getopt.h \
+  regex.h regexp.h endian.h machine/endian.h asm/byteorder.h malloc.h)
+
+dnl Checks for library functions.
+AC_FUNC_ALLOCA
+AC_CHECK_FUNC(vfork)
+AC_CHECK_FUNCS(S_ISSOCK S_ISFIFO)
+AC_CHECK_FUNC(realpath, REALPATH='', REALPATH='realpath.o' LIBMISC='-lmisc')
+AC_CHECK_FUNC(ftw, FTW='', FTW='ftw.o' LIBMISC='-lmisc')
+AC_CHECK_FUNC(getopt_long, GETOPT='' GETOPT1='', GETOPT='getopt.o' GETOPT1='getopt1.o' LIBMISC='-lmisc')
+
+AC_SUBST(REALPATH)
+AC_SUBST(FTW)
+AC_SUBST(GETOPT)
+AC_SUBST(GETOPT1)
+AC_SUBST(LIBMISC)
+
+AC_OUTPUT(Makefile lib/Makefile build/Makefile tools/Makefile po/Makefile misc/Makefile)

diff --git a/install-sh b/install-sh
new file mode 100755 (executable)
index 0000000..5871924
--- /dev/null
+++ b/install-sh
@@ -0,0 +1,238 @@
+#! /bin/sh
+#
+# install - install a program, script, or datafile
+# This comes from X11R5.
+#
+# Calling this script install-sh is preferred over install.sh, to prevent
+# `make' implicit rules from creating a file called install from it
+# when there is no Makefile.
+#
+# This script is compatible with the BSD install script, but was written
+# from scratch.
+#
+
+
+# set DOITPROG to echo to test this script
+
+# Don't use :- since 4.3BSD and earlier shells don't like it.
+doit="${DOITPROG-}"
+
+
+# put in absolute paths if you don't have them in your path; or use env. vars.
+
+mvprog="${MVPROG-mv}"
+cpprog="${CPPROG-cp}"
+chmodprog="${CHMODPROG-chmod}"
+chownprog="${CHOWNPROG-chown}"
+chgrpprog="${CHGRPPROG-chgrp}"
+stripprog="${STRIPPROG-strip}"
+rmprog="${RMPROG-rm}"
+mkdirprog="${MKDIRPROG-mkdir}"
+
+transformbasename=""
+transform_arg=""
+instcmd="$mvprog"
+chmodcmd="$chmodprog 0755"
+chowncmd=""
+chgrpcmd=""
+stripcmd=""
+rmcmd="$rmprog -f"
+mvcmd="$mvprog"
+src=""
+dst=""
+dir_arg=""
+
+while [ x"$1" != x ]; do
+    case $1 in
+       -c) instcmd="$cpprog"
+           shift
+           continue;;
+
+       -d) dir_arg=true
+           shift
+           continue;;
+
+       -m) chmodcmd="$chmodprog $2"
+           shift
+           shift
+           continue;;
+
+       -o) chowncmd="$chownprog $2"
+           shift
+           shift
+           continue;;
+
+       -g) chgrpcmd="$chgrpprog $2"
+           shift
+           shift
+           continue;;
+
+       -s) stripcmd="$stripprog"
+           shift
+           continue;;
+
+       -t=*) transformarg=`echo $1 | sed 's/-t=//'`
+           shift
+           continue;;
+
+       -b=*) transformbasename=`echo $1 | sed 's/-b=//'`
+           shift
+           continue;;
+
+       *)  if [ x"$src" = x ]
+           then
+               src=$1
+           else
+               # this colon is to work around a 386BSD /bin/sh bug
+               :
+               dst=$1
+           fi
+           shift
+           continue;;
+    esac
+done
+
+if [ x"$src" = x ]
+then
+       echo "install:  no input file specified"
+       exit 1
+else
+       true
+fi
+
+if [ x"$dir_arg" != x ]; then
+       dst=$src
+       src=""
+       
+       if [ -d $dst ]; then
+               instcmd=:
+       else
+               instcmd=mkdir
+       fi
+else
+
+# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
+# might cause directories to be created, which would be especially bad 
+# if $src (and thus $dsttmp) contains '*'.
+
+       if [ -f $src -o -d $src ]
+       then
+               true
+       else
+               echo "install:  $src does not exist"
+               exit 1
+       fi
+       
+       if [ x"$dst" = x ]
+       then
+               echo "install:  no destination specified"
+               exit 1
+       else
+               true
+       fi
+
+# If destination is a directory, append the input filename; if your system
+# does not like double slashes in filenames, you may need to add some logic
+
+       if [ -d $dst ]
+       then
+               dst="$dst"/`basename $src`
+       else
+               true
+       fi
+fi
+
+## this sed command emulates the dirname command
+dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
+
+# Make sure that the destination directory exists.
+#  this part is taken from Noah Friedman's mkinstalldirs script
+
+# Skip lots of stat calls in the usual case.
+if [ ! -d "$dstdir" ]; then
+defaultIFS='   
+'
+IFS="${IFS-${defaultIFS}}"
+
+oIFS="${IFS}"
+# Some sh's can't handle IFS=/ for some reason.
+IFS='%'
+set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'`
+IFS="${oIFS}"
+
+pathcomp=''
+
+while [ $# -ne 0 ] ; do
+       pathcomp="${pathcomp}${1}"
+       shift
+
+       if [ ! -d "${pathcomp}" ] ;
+        then
+               $mkdirprog "${pathcomp}"
+       else
+               true
+       fi
+
+       pathcomp="${pathcomp}/"
+done
+fi
+
+if [ x"$dir_arg" != x ]
+then
+       $doit $instcmd $dst &&
+
+       if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi &&
+       if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi &&
+       if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi &&
+       if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi
+else
+
+# If we're going to rename the final executable, determine the name now.
+
+       if [ x"$transformarg" = x ] 
+       then
+               dstfile=`basename $dst`
+       else
+               dstfile=`basename $dst $transformbasename | 
+                       sed $transformarg`$transformbasename
+       fi
+
+# don't allow the sed command to completely eliminate the filename
+
+       if [ x"$dstfile" = x ] 
+       then
+               dstfile=`basename $dst`
+       else
+               true
+       fi
+
+# Make a temp file name in the proper directory.
+
+       dsttmp=$dstdir/#inst.$$#
+
+# Move or copy the file name to the temp name
+
+       $doit $instcmd $src $dsttmp &&
+
+       trap "rm -f ${dsttmp}" 0 &&
+
+# and set any options; do chmod last to preserve setuid bits
+
+# If any of these fail, we abort the whole thing.  If we want to
+# ignore errors from any of these, just make sure not to ignore
+# errors from the above "$doit $instcmd $src $dsttmp" command.
+
+       if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi &&
+       if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi &&
+       if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi &&
+       if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi &&
+
+# Now rename the file to the real destination.
+
+       $doit $rmcmd -f $dstdir/$dstfile &&
+       $doit $mvcmd $dsttmp $dstdir/$dstfile 
+
+fi &&
+
+
+exit 0