* Makefile.in (INIT_FILES): Append CONFIG_INITS
* configure.in (CONFIG_INIT): Initialize.
+ (links): Link srcdir/gdbtk/library to gdbtcl2.
+ * gdbtcl2: Moved to gdbtk/library.
+ ChangeLog-gdbtk, gdbtk-cmds.c, gdbtk-hooks.c, gdbtk-variable.c,
+ gdbtk-varobj.c, gdbtk-wrapper.c, gdbtk-wrapper.h, gdbtk.c,
+ gdbtk.h: Moved to gdbtk/generic.
2000-02-03 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
1999-09-17 Fernando Nasser <fnasser@totem.to.cygnus.com>
* Makefile.in: Add entries for varobj.[cho] and wrapper.[cho].
+ gdbtk-varobj.[co]. gdbtk-varobj.o is not yet on the COMMON_OBS
+ list because it conflicts with the older gdbtk-variable.o which
+ is still the default.
1999-09-17 Fernando Nasser <fnasser@totem.to.cygnus.com>
* defs.h (continuation): Make this a typedef.
+ * Makefile.in (gdbtk.o, gdbtk-cmds.o): Depend on $(top_h).
+
* Makefile.in (i386-linux-nat.o): Depend on symfile.h, not
$(symfile_h); the latter has no definition.
__dld_break, which contains the permanent breakpoint, when interesting
things happen. Tell GDB that the breakpoint in __dld_break is
permanent.
+ * gdbtk-cmds.c (gdb_get_breakpoint_info): Report a permanent
+ breakpoint as enabled.
* infrun.c (SKIP_PERMANENT_BREAKPOINT): Provide default definition.
(default_skip_permanent_breakpoint): New function.
(resume): If we're trying to resume at a permanent breakpoint, use
Scheme support Jim Blandy jimb@cygnus.com
svr4 shlibs (solib.c) Jim Blandy jimb@cygnus.com
arm target Jim Ingham jingham@cygnus.com
+gdbtk (c & tcl) Jim Ingham jingham@cygnus.com
+libgui (w/foundry, sn) Jim Ingham jingham@cygnus.com
hurd native Mark Kettenis kettenis@wins.va.nl
hpux, hp pa native Jeff Law law@cygnus.com
m32r target Michael Snyder msnyder@cygnus.com
WIN32LIBS = @WIN32LIBS@
+# Where is the TCL library? Typically in ../tcl.
+LIB_INSTALL_DIR = $(libdir)
+# This variable is needed when doing dynamic linking.
+LIB_RUNTIME_DIR = $(libdir)
+TCL = @TCL_LD_SEARCH_FLAGS@ @TCL_BUILD_LIB_SPEC@
+TCL_CFLAGS = @TCLHDIR@
+TCL_DEPS =
+GDBTKLIBS = @GDBTKLIBS@
+# Extra flags that the GDBTK files need:
+GDBTK_CFLAGS = @GDBTK_CFLAGS@
+
+# Where is the TK library? Typically in ../tk.
+TK = @TK_BUILD_LIB_SPEC@
+TK_CFLAGS = @TKHDIR@ @TK_BUILD_INCLUDES@
+TK_DEPS =
+
+# Where is Itcl? Typically in ../itcl/itcl.
+ITCL_CFLAGS = @ITCLHDIR@
+ITCL = @ITCLLIB@
+ITCL_DEPS = @ITCL_DEPS@
+
+# Where is Itk? Typically in ../itcl/itk.
+ITK_CFLAGS = @ITKHDIR@
+ITK = @ITKLIB@
+ITK_DEPS = @ITK_DEPS@
+
+# Where is Tix? Typically in ../tix.
+TIX_CFLAGS = @TIXHDIR@
+TIX = @TIXLIB@
+TIX_DEPS = @TIX_DEPS@
+
+X11_CFLAGS = @TK_XINCLUDES@
+X11_LDFLAGS =
+X11_LIBS =
+
+WIN32LDAPP = @WIN32LDAPP@
+
+ENABLE_GDBTK= @ENABLE_GDBTK@
+LIBGUI = @LIBGUI@
+GUI_CFLAGS_X = @GUI_CFLAGS_X@
+IDE_CFLAGS=$(GUI_CFLAGS_X) $(IDE_CFLAGS_X)
ENABLE_CFLAGS= @ENABLE_CFLAGS@
kod.c kod-cisco.c \
ui-out.c cli-out.c \
varobj.c wrapper.c \
+ gdbtk-varobj.c \
jv-exp.y jv-lang.c jv-valprint.c jv-typeprint.c \
m2-exp.y m2-lang.c m2-typeprint.c m2-valprint.c main.c maint.c \
mem-break.c minsyms.c mipsread.c nlmread.c objfiles.c parse.c \
fi ; \
$(INSTALL_PROGRAM) gdb$(EXEEXT) $(bindir)/$$transformed_name$(EXEEXT) ; \
$(INSTALL_DATA) $(srcdir)/gdb.1 $(man1dir)/$$transformed_name.1
+ $(SHELL) $(srcdir)/../mkinstalldirs $(datadir)/gdbtcl ; \
+ $(SHELL) $(srcdir)/../mkinstalldirs \
+ $(datadir)/gdbtcl/images \
+ $(datadir)/gdbtcl/images2 ; \
+ $(SHELL) $(srcdir)/../mkinstalldirs $(datadir)/gdbtcl/help \
+ $(datadir)/gdbtcl/help/images \
+ $(datadir)/gdbtcl/help/trace ; \
+ cd $(srcdir)/gdbtk/library ; \
+ for i in *.tcl *.ith *.itb images/*.gif images2/*.gif images/icons.txt images2/icons.txt tclIndex help/*.html help/trace/*.html help/trace/index.toc help/images/*.gif; \
+ do \
+ $(INSTALL_DATA) $$i $(datadir)/gdbtcl/$$i ; \
+ done ;
@$(MAKE) DO=install "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS) subdir_do
uninstall: force
true ; \
fi ; \
rm -f $(bindir)/$$transformed_name$(EXEEXT) $(man1dir)/$$transformed_name.1
+ rm -rf $(datadir)/gdbtcl
@$(MAKE) DO=uninstall "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS) subdir_do
# We do this by grepping through sources. If that turns out to be too slow,
fork-child.o: fork-child.c $(wait_h) $(defs_h) $(gdbcore_h) \
$(inferior_h) target.h terminal.h gdbthread.h gdb_string.h
+gdbres.o: $(srcdir)/gdbtk/gdb.rc $(srcdir)/gdbtk/gdbtool.ico
+ $(WINDRES) --include $(srcdir)/gdbtk $(srcdir)/gdbtk/gdb.rc gdbres.o
+
+gdbtk.o: $(srcdir)/gdbtk/generic/gdbtk.c \
+ $(srcdir)/gdbtk/generic/gdbtk.h $(defs_h) \
+ $(symtab_h) $(inferior_h) $(command_h) \
+ $(bfd_h) symfile.h objfiles.h target.h gdb_string.h $(tracepoint_h) \
+ $(top_h)
+ $(CC) -c $(INTERNAL_CFLAGS) $(IDE_CFLAGS) $(ITCL_CFLAGS) \
+ $(ITK_CFLAGS) $(TIX_CFLAGS) \
+ $(TCL_CFLAGS) $(TK_CFLAGS) $(X11_CFLAGS) $(GDBTK_CFLAGS)\
+ $(srcdir)/gdbtk/generic/gdbtk.c -DGDBTK_LIBRARY=\"$(datadir)/gdbtcl\"
+
+gdbtk-cmds.o: $(srcdir)/gdbtk/generic/gdbtk-cmds.c \
+ $(srcdir)/gdbtk/generic/gdbtk.h \
+ $(defs_h) $(symtab_h) $(inferior_h) \
+ $(command_h) $(bfd_h) $(top_h) symfile.h objfiles.h target.h \
+ gdb_string.h $(tracepoint_h) $(frame_h) source.h
+ $(CC) -c $(INTERNAL_CFLAGS) $(IDE_CFLAGS) $(ITCL_CFLAGS) \
+ $(TIX_CFLAGS) $(TCL_CFLAGS) $(TK_CFLAGS) $(X11_CFLAGS) \
+ $(GDBTK_CFLAGS) $(srcdir)/gdbtk/generic/gdbtk-cmds.c \
+ -DGDBTK_LIBRARY=\"$(datadir)/gdbtcl\"
+
+gdbtk-hooks.o: $(srcdir)/gdbtk/generic/gdbtk-hooks.c \
+ $(srcdir)/gdbtk/generic/gdbtk.h $(defs_h) \
+ $(symtab_h) $(inferior_h) $(command_h) \
+ $(bfd_h) symfile.h objfiles.h target.h gdb_string.h $(tracepoint_h)
+ $(CC) -c $(INTERNAL_CFLAGS) $(IDE_CFLAGS) $(ITCL_CFLAGS) $(TIX_CFLAGS) \
+ $(TCL_CFLAGS) $(TK_CFLAGS) $(X11_CFLAGS) $(GDBTK_CFLAGS)\
+ $(srcdir)/gdbtk/generic/gdbtk-hooks.c -DGDBTK_LIBRARY=\"$(datadir)/gdbtcl\"
+
+gdbtk-variable.o: $(srcdir)/gdbtk/generic/gdbtk-variable.c \
+ $(srcdir)/gdbtk/generic/gdbtk.h $(srcdir)/gdbtk/generic/gdbtk-wrapper.h
+ $(CC) -c $(INTERNAL_CFLAGS) $(IDE_CFLAGS) $(ITCL_CFLAGS) $(TIX_CFLAGS) \
+ $(TCL_CFLAGS) $(TK_CFLAGS) $(X11_CFLAGS) $(GDBTK_CFLAGS)\
+ $(srcdir)/gdbtk/generic/gdbtk-variable.c
+
+gdbtk-varobj.o: $(srcdir)/gdbtk/generic/gdbtk-varobj.c \
+ $(srcdir)/gdbtk/generic/gdbtk.h \
+ $(defs_h) $(value_h) varobj.h
+ $(CC) -c $(INTERNAL_CFLAGS) $(IDE_CFLAGS) $(ITCL_CFLAGS) $(TIX_CFLAGS) \
+ $(TCL_CFLAGS) $(TK_CFLAGS) $(X11_CFLAGS) $(GDBTK_CFLAGS)\
+ $(srcdir)/gdbtk/generic/gdbtk-varobj.c
+
+gdbtk-wrapper.o: $(srcdir)/gdbtk/generic/gdbtk-wrapper.c \
+ $(srcdir)/gdbtk/generic/gdbtk-wrapper.h
+ $(CC) -c $(INTERNAL_CFLAGS) $(IDE_CFLAGS) $(GDBTK_CFLAGS)\
+ $(srcdir)/gdbtk/generic/gdbtk-wrapper.c
+
+v850ice.o: v850ice.c $(defs_h) $(symtab_h) $(inferior_h) $(command_h) \
+ $(frame_h) $(breakpoint_h) $(gdbcore_h) $(value_h) symfile.h \
+ gdb_string.h target.h objfiles.h
+ $(CC) -c $(INTERNAL_CFLAGS) $(IDE_CFLAGS) $(ITCL_CFLAGS) $(TIX_CFLAGS) \
+ $(TCL_CFLAGS) $(TK_CFLAGS) $(X11_CFLAGS) $(GDBTK_CFLAGS)\
+ $(srcdir)/v850ice.c
+
tracepoint.o: tracepoint.c $(defs_h) $(symtab_h) $(frame_h) $(tracepoint_h) \
$(gdbtypes_h) $(expression_h) $(gdbcmd_h) $(value_h) target.h \
language.h gdb_string.h $(readline_headers) $(remote_h)
fi
+LIBGUI="../libgui/src/libgui.a"
+GUI_CFLAGS_X="-I${srcdir}/../libgui/src"
+
+
# Check whether --with-cpu or --without-cpu was given.
if test "${with_cpu+set}" = set; then
+ENABLE_GDBTK=
+
+# Check whether --enable-gdbtk or --disable-gdbtk was given.
+if test "${enable_gdbtk+set}" = set; then
+ enableval="$enable_gdbtk"
+ case "${enableval}" in
+ yes)
+ case "$host" in
+ *go32*)
+ echo "configure: warning: GDB does not support GDBtk on host ${host}. GDBtk will be disabled." 1>&2
+ enable_gdbtk=no ;;
+ *windows*)
+ echo "configure: warning: GDB does not support GDBtk on host ${host}. GDBtk will be disabled." 1>&2
+ enable_gdbtk=no ;;
+ *)
+ enable_gdbtk=yes ;;
+ esac ;;
+ no)
+ enable_gdbtk=no ;;
+ *)
+ { echo "configure: error: bad value ${enableval} given for gdbtk option" 1>&2; exit 1; } ;;
+esac
+else
+
+# Default is on for everything but go32 and Cygwin
+case "$host" in
+ *go32* | *windows*)
+ ;;
+ *)
+ enable_gdbtk=yes ;;
+ esac
+
+fi
+
+
+WIN32LDAPP=
+
+
+
+configdir="unix"
+
+GDBTKLIBS=
+if test "${enable_gdbtk}" = "yes"; then
+
+
+#
+# Ok, lets find the tcl configuration
+# First, look for one uninstalled.
+# the alternative search directory is invoked by --with-tclconfig
+#
+
+if test x"${no_tcl}" = x ; then
+ # we reset no_tcl in case something fails here
+ no_tcl=true
+ # Check whether --with-tclconfig or --without-tclconfig was given.
+if test "${with_tclconfig+set}" = set; then
+ withval="$with_tclconfig"
+ with_tclconfig=${withval}
+fi
+
+ echo $ac_n "checking for Tcl configuration""... $ac_c" 1>&6
+echo "configure:5791: checking for Tcl configuration" >&5
+ if eval "test \"`echo '$''{'ac_cv_c_tclconfig'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+
+
+ # First check to see if --with-tclconfig was specified.
+ if test x"${with_tclconfig}" != x ; then
+ if test -f "${with_tclconfig}/tclConfig.sh" ; then
+ ac_cv_c_tclconfig=`(cd ${with_tclconfig}; pwd)`
+ else
+ { echo "configure: error: ${with_tclconfig} directory doesn't contain tclConfig.sh" 1>&2; exit 1; }
+ fi
+ fi
+
+ # then check for a private Tcl installation
+ if test x"${ac_cv_c_tclconfig}" = x ; then
+ for i in \
+ ../tcl \
+ `ls -dr ../tcl[7-9]* 2>/dev/null` \
+ ../../tcl \
+ `ls -dr ../../tcl[7-9]* 2>/dev/null` \
+ ../../../tcl \
+ `ls -dr ../../../tcl[7-9]* 2>/dev/null` ; do
+ if test -f "$i/${configdir}/tclConfig.sh" ; then
+ ac_cv_c_tclconfig=`(cd $i/${configdir}; pwd)`
+ break
+ fi
+ done
+ fi
+ # check in a few common install locations
+ if test x"${ac_cv_c_tclconfig}" = x ; then
+ for i in `ls -d ${prefix}/lib /usr/local/lib 2>/dev/null` ; do
+ if test -f "$i/tclConfig.sh" ; then
+ ac_cv_c_tclconfig=`(cd $i; pwd)`
+ break
+ fi
+ done
+ fi
+ # check in a few other private locations
+ if test x"${ac_cv_c_tclconfig}" = x ; then
+ for i in \
+ ${srcdir}/../tcl \
+ `ls -dr ${srcdir}/../tcl[7-9]* 2>/dev/null` ; do
+ if test -f "$i/${configdir}/tclConfig.sh" ; then
+ ac_cv_c_tclconfig=`(cd $i/${configdir}; pwd)`
+ break
+ fi
+ done
+ fi
+
+fi
+
+ if test x"${ac_cv_c_tclconfig}" = x ; then
+ TCLCONFIG="# no Tcl configs found"
+ echo "configure: warning: Can't find Tcl configuration definitions" 1>&2
+ else
+ no_tcl=
+ TCLCONFIG=${ac_cv_c_tclconfig}/tclConfig.sh
+ echo "$ac_t""found $TCLCONFIG" 1>&6
+ fi
+fi
+
+ if test -z "${no_tcl}"; then
+
+ . $TCLCONFIG
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+#
+# Ok, lets find the tk configuration
+# First, look for one uninstalled.
+# the alternative search directory is invoked by --with-tkconfig
+#
+
+if test x"${no_tk}" = x ; then
+ # we reset no_tk in case something fails here
+ no_tk=true
+ # Check whether --with-tkconfig or --without-tkconfig was given.
+if test "${with_tkconfig+set}" = set; then
+ withval="$with_tkconfig"
+ with_tkconfig=${withval}
+fi
+
+ echo $ac_n "checking for Tk configuration""... $ac_c" 1>&6
+echo "configure:5899: checking for Tk configuration" >&5
+ if eval "test \"`echo '$''{'ac_cv_c_tkconfig'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+
+
+ # First check to see if --with-tkconfig was specified.
+ if test x"${with_tkconfig}" != x ; then
+ if test -f "${with_tkconfig}/tkConfig.sh" ; then
+ ac_cv_c_tkconfig=`(cd ${with_tkconfig}; pwd)`
+ else
+ { echo "configure: error: ${with_tkconfig} directory doesn't contain tkConfig.sh" 1>&2; exit 1; }
+ fi
+ fi
+
+ # then check for a private Tk library
+ if test x"${ac_cv_c_tkconfig}" = x ; then
+ for i in \
+ ../tk \
+ `ls -dr ../tk[4-9]* 2>/dev/null` \
+ ../../tk \
+ `ls -dr ../../tk[4-9]* 2>/dev/null` \
+ ../../../tk \
+ `ls -dr ../../../tk[4-9]* 2>/dev/null` ; do
+ if test -f "$i/${configdir}/tkConfig.sh" ; then
+ ac_cv_c_tkconfig=`(cd $i/${configdir}; pwd)`
+ break
+ fi
+ done
+ fi
+ # check in a few common install locations
+ if test x"${ac_cv_c_tkconfig}" = x ; then
+ for i in `ls -d ${prefix}/lib /usr/local/lib 2>/dev/null` ; do
+ if test -f "$i/tkConfig.sh" ; then
+ ac_cv_c_tkconfig=`(cd $i; pwd)`
+ break
+ fi
+ done
+ fi
+ # check in a few other private locations
+ if test x"${ac_cv_c_tkconfig}" = x ; then
+ for i in \
+ ${srcdir}/../tk \
+ `ls -dr ${srcdir}/../tk[4-9]* 2>/dev/null` ; do
+ if test -f "$i/${configdir}/tkConfig.sh" ; then
+ ac_cv_c_tkconfig=`(cd $i/${configdir}; pwd)`
+ break
+ fi
+ done
+ fi
+
+fi
+
+ if test x"${ac_cv_c_tkconfig}" = x ; then
+ TKCONFIG="# no Tk configs found"
+ echo "configure: warning: Can't find Tk configuration definitions" 1>&2
+ else
+ no_tk=
+ TKCONFIG=${ac_cv_c_tkconfig}/tkConfig.sh
+ echo "$ac_t""found $TKCONFIG" 1>&6
+ fi
+fi
+
+
+
+ # If $no_tk is nonempty, then we can't do Tk, and there is no
+ # point to doing Tcl.
+ if test -z "${no_tk}"; then
+
+ if test -f "$TKCONFIG" ; then
+ . $TKCONFIG
+ fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+#
+# Ok, lets find the tcl source trees so we can use the headers
+# Warning: transition of version 9 to 10 will break this algorithm
+# because 10 sorts before 9. We also look for just tcl. We have to
+# be careful that we don't match stuff like tclX by accident.
+# the alternative search directory is involked by --with-tclinclude
+#
+
+no_tcl=true
+echo $ac_n "checking for Tcl private headers. dir=${configdir}""... $ac_c" 1>&6
+echo "configure:5995: checking for Tcl private headers. dir=${configdir}" >&5
+# Check whether --with-tclinclude or --without-tclinclude was given.
+if test "${with_tclinclude+set}" = set; then
+ withval="$with_tclinclude"
+ with_tclinclude=${withval}
+fi
+
+if eval "test \"`echo '$''{'ac_cv_c_tclh'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+
+# first check to see if --with-tclinclude was specified
+if test x"${with_tclinclude}" != x ; then
+ if test -f ${with_tclinclude}/tclInt.h ; then
+ ac_cv_c_tclh=`(cd ${with_tclinclude}; pwd)`
+ elif test -f ${with_tclinclude}/generic/tclInt.h ; then
+ ac_cv_c_tclh=`(cd ${with_tclinclude}/generic; pwd)`
+ else
+ { echo "configure: error: ${with_tclinclude} directory doesn't contain private headers" 1>&2; exit 1; }
+ fi
+fi
+
+# next check if it came with Tcl configuration file
+if test x"${ac_cv_c_tclconfig}" = x ; then
+ if test -f $ac_cv_c_tclconfig/../generic/tclInt.h ; then
+ ac_cv_c_tclh=`(cd $ac_cv_c_tclconfig/..; pwd)`
+ fi
+fi
+
+# next check in private source directory
+#
+# since ls returns lowest version numbers first, reverse its output
+if test x"${ac_cv_c_tclh}" = x ; then
+ for i in \
+ ${srcdir}/../tcl \
+ `ls -dr ${srcdir}/../tcl[7-9]* 2>/dev/null` \
+ ${srcdir}/../../tcl \
+ `ls -dr ${srcdir}/../../tcl[7-9]* 2>/dev/null` \
+ ${srcdir}/../../../tcl \
+ `ls -dr ${srcdir}/../../../tcl[7-9]* 2>/dev/null ` ; do
+ if test -f $i/generic/tclInt.h ; then
+ ac_cv_c_tclh=`(cd $i/generic; pwd)`
+ break
+ fi
+ done
+fi
+# finally check in a few common install locations
+#
+# since ls returns lowest version numbers first, reverse its output
+if test x"${ac_cv_c_tclh}" = x ; then
+ for i in \
+ `ls -dr /usr/local/src/tcl[7-9]* 2>/dev/null` \
+ `ls -dr /usr/local/lib/tcl[7-9]* 2>/dev/null` \
+ /usr/local/src/tcl \
+ /usr/local/lib/tcl \
+ ${prefix}/include ; do
+ if test -f $i/generic/tclInt.h ; then
+ ac_cv_c_tclh=`(cd $i/generic; pwd)`
+ break
+ fi
+ done
+fi
+# see if one is installed
+if test x"${ac_cv_c_tclh}" = x ; then
+ ac_safe=`echo "tclInt.h" | sed 'y%./+-%__p_%'`
+echo $ac_n "checking for tclInt.h""... $ac_c" 1>&6
+echo "configure:6061: checking for tclInt.h" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 6066 "configure"
+#include "confdefs.h"
+#include <tclInt.h>
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:6071: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=yes"
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=no"
+fi
+rm -f conftest*
+fi
+if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ ac_cv_c_tclh=installed
+else
+ echo "$ac_t""no" 1>&6
+ac_cv_c_tclh=""
+fi
+
+fi
+
+fi
+
+if test x"${ac_cv_c_tclh}" = x ; then
+ TCLHDIR="# no Tcl private headers found"
+ { echo "configure: error: Can't find Tcl private headers" 1>&2; exit 1; }
+fi
+if test x"${ac_cv_c_tclh}" != x ; then
+ no_tcl=""
+ if test x"${ac_cv_c_tclh}" = x"installed" ; then
+ echo "$ac_t""is installed" 1>&6
+ TCLHDIR=""
+ else
+ echo "$ac_t""found in ${ac_cv_c_tclh}" 1>&6
+ # this hack is cause the TCLHDIR won't print if there is a "-I" in it.
+ TCLHDIR="-I${ac_cv_c_tclh}"
+ fi
+fi
+
+
+
+
+#
+# Ok, lets find the tk source trees so we can use the headers
+# If the directory (presumably symlink) named "tk" exists, use that one
+# in preference to any others. Same logic is used when choosing library
+# and again with Tcl. The search order is the best place to look first, then in
+# decreasing significance. The loop breaks if the trigger file is found.
+# Note the gross little conversion here of srcdir by cd'ing to the found
+# directory. This converts the path from a relative to an absolute, so
+# recursive cache variables for the path will work right. We check all
+# the possible paths in one loop rather than many seperate loops to speed
+# things up.
+# the alternative search directory is involked by --with-tkinclude
+#
+no_tk=true
+echo $ac_n "checking for Tk private headers""... $ac_c" 1>&6
+echo "configure:6131: checking for Tk private headers" >&5
+# Check whether --with-tkinclude or --without-tkinclude was given.
+if test "${with_tkinclude+set}" = set; then
+ withval="$with_tkinclude"
+ with_tkinclude=${withval}
+fi
+
+if eval "test \"`echo '$''{'ac_cv_c_tkh'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+
+# first check to see if --with-tkinclude was specified
+if test x"${with_tkinclude}" != x ; then
+ if test -f ${with_tkinclude}/tk.h ; then
+ ac_cv_c_tkh=`(cd ${with_tkinclude}; pwd)`
+ elif test -f ${with_tkinclude}/generic/tk.h ; then
+ ac_cv_c_tkh=`(cd ${with_tkinclude}/generic; pwd)`
+ else
+ { echo "configure: error: ${with_tkinclude} directory doesn't contain private headers" 1>&2; exit 1; }
+ fi
+fi
+
+# next check if it came with Tk configuration file
+if test x"${ac_cv_c_tkconfig}" = x ; then
+ if test -f $ac_cv_c_tkconfig/../generic/tk.h ; then
+ ac_cv_c_tkh=`(cd $ac_cv_c_tkconfig/..; pwd)`
+ fi
+fi
+
+# next check in private source directory
+#
+# since ls returns lowest version numbers first, reverse its output
+if test x"${ac_cv_c_tkh}" = x ; then
+ for i in \
+ ${srcdir}/../tk \
+ `ls -dr ${srcdir}/../tk[4-9]* 2>/dev/null` \
+ ${srcdir}/../../tk \
+ `ls -dr ${srcdir}/../../tk[4-9]* 2>/dev/null` \
+ ${srcdir}/../../../tk \
+ `ls -dr ${srcdir}/../../../tk[4-9]* 2>/dev/null ` ; do
+ if test -f $i/generic/tk.h ; then
+ ac_cv_c_tkh=`(cd $i/generic; pwd)`
+ break
+ fi
+ done
+fi
+# finally check in a few common install locations
+#
+# since ls returns lowest version numbers first, reverse its output
+if test x"${ac_cv_c_tkh}" = x ; then
+ for i in \
+ `ls -dr /usr/local/src/tk[4-9]* 2>/dev/null` \
+ `ls -dr /usr/local/lib/tk[4-9]* 2>/dev/null` \
+ /usr/local/src/tk \
+ /usr/local/lib/tk \
+ ${prefix}/include ; do
+ if test -f $i/generic/tk.h ; then
+ ac_cv_c_tkh=`(cd $i/generic; pwd)`
+ break
+ fi
+ done
+fi
+# see if one is installed
+if test x"${ac_cv_c_tkh}" = x ; then
+ ac_safe=`echo "tk.h" | sed 'y%./+-%__p_%'`
+echo $ac_n "checking for tk.h""... $ac_c" 1>&6
+echo "configure:6197: checking for tk.h" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 6202 "configure"
+#include "confdefs.h"
+#include <tk.h>
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:6207: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=yes"
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=no"
+fi
+rm -f conftest*
+fi
+if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ ac_cv_c_tkh=installed
+else
+ echo "$ac_t""no" 1>&6
+ac_cv_c_tkh=""
+fi
+
+fi
+
+fi
+
+if test x"${ac_cv_c_tkh}" != x ; then
+ no_tk=""
+ if test x"${ac_cv_c_tkh}" = x"installed" ; then
+ echo "$ac_t""is installed" 1>&6
+ TKHDIR=""
+ else
+ echo "$ac_t""found in ${ac_cv_c_tkh}" 1>&6
+ # this hack is cause the TKHDIR won't print if there is a "-I" in it.
+ TKHDIR="-I${ac_cv_c_tkh}"
+ fi
+else
+ TKHDIR="# no Tk directory found"
+ echo "configure: warning: Can't find Tk private headers" 1>&2
+ no_tk=true
+fi
+
+
+
+
+echo $ac_n "checking for Itcl private headers. srcdir=${srcdir}""... $ac_c" 1>&6
+echo "configure:6253: checking for Itcl private headers. srcdir=${srcdir}" >&5
+if test x"${ac_cv_c_itclh}" = x ; then
+ for i in ${srcdir}/../itcl ${srcdir}/../../itcl ${srcdir}/../../../itcl ${srcdir}/../itcl/itcl; do
+ if test -f $i/generic/itcl.h ; then
+ ac_cv_c_itclh=`(cd $i/generic; pwd)`
+ break
+ fi
+ done
+fi
+if test x"${ac_cv_c_itclh}" = x ; then
+ ITCLHDIR="# no Itcl private headers found"
+ { echo "configure: error: Can't find Itcl private headers" 1>&2; exit 1; }
+fi
+if test x"${ac_cv_c_itclh}" != x ; then
+ ITCLHDIR="-I${ac_cv_c_itclh}"
+fi
+# should always be here
+# ITCLLIB="../itcl/itcl/unix/libitcl.a"
+
+#AC_SUBST(ITCLLIB)
+
+
+echo $ac_n "checking for Itk private headers. srcdir=${srcdir}""... $ac_c" 1>&6
+echo "configure:6276: checking for Itk private headers. srcdir=${srcdir}" >&5
+if test x"${ac_cv_c_itkh}" = x ; then
+ for i in ${srcdir}/../itcl ${srcdir}/../../itcl ${srcdir}/../../../itcl ${srcdir}/../itcl/itk; do
+ if test -f $i/generic/itk.h ; then
+ ac_cv_c_itkh=`(cd $i/generic; pwd)`
+ break
+ fi
+ done
+fi
+if test x"${ac_cv_c_itkh}" = x ; then
+ ITKHDIR="# no Itk private headers found"
+ { echo "configure: error: Can't find Itk private headers" 1>&2; exit 1; }
+fi
+if test x"${ac_cv_c_itkh}" != x ; then
+ ITKHDIR="-I${ac_cv_c_itkh}"
+fi
+# should always be here
+# ITKLIB="../itcl/itk/unix/libitk.a"
+
+#AC_SUBST(ITKLIB)
+
+
+echo $ac_n "checking for Tix private headers. srcdir=${srcdir}""... $ac_c" 1>&6
+echo "configure:6299: checking for Tix private headers. srcdir=${srcdir}" >&5
+if test x"${ac_cv_c_tixh}" = x ; then
+ for i in ${srcdir}/../tix ${srcdir}/../../tix ${srcdir}/../../../tix ; do
+ if test -f $i/generic/tix.h ; then
+ ac_cv_c_tixh=`(cd $i/generic; pwd)`
+ break
+ fi
+ done
+fi
+if test x"${ac_cv_c_tixh}" = x ; then
+ TIXHDIR="# no Tix private headers found"
+ { echo "configure: error: Can't find Tix private headers" 1>&2; exit 1; }
+fi
+if test x"${ac_cv_c_tixh}" != x ; then
+ TIXHDIR="-I${ac_cv_c_tixh}"
+fi
+
+
+
+ # now look for Itcl library stuff
+
+
+#
+# Ok, lets find the itcl configuration
+# First, look for one uninstalled.
+# the alternative search directory is invoked by --with-itclconfig
+#
+
+if test x"${no_itcl}" = x ; then
+ # we reset no_itcl in case something fails here
+ no_itcl=true
+ # Check whether --with-itclconfig or --without-itclconfig was given.
+if test "${with_itclconfig+set}" = set; then
+ withval="$with_itclconfig"
+ with_itclconfig=${withval}
+fi
+
+ echo $ac_n "checking for Itcl configuration""... $ac_c" 1>&6
+echo "configure:6337: checking for Itcl configuration" >&5
+ if eval "test \"`echo '$''{'ac_cv_c_itclconfig'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+
+
+ # First check to see if --with-itclconfig was specified.
+ if test x"${with_itclconfig}" != x ; then
+ if test -f "${with_itclconfig}/itclConfig.sh" ; then
+ ac_cv_c_itclconfig=`(cd ${with_itclconfig}; pwd)`
+ else
+ { echo "configure: error: ${with_itclconfig} directory doesn't contain itclConfig.sh" 1>&2; exit 1; }
+ fi
+ fi
+
+ # then check for a private Itcl library
+ if test x"${ac_cv_c_itclconfig}" = x ; then
+ for i in \
+ ../itcl/itcl \
+ `ls -dr ../itcl[4-9]*/itcl 2>/dev/null` \
+ ../../itcl \
+ `ls -dr ../../itcl[4-9]*/itcl 2>/dev/null` \
+ ../../../itcl \
+ `ls -dr ../../../itcl[4-9]*/itcl 2>/dev/null` ; do
+ if test -f "$i/itclConfig.sh" ; then
+ ac_cv_c_itclconfig=`(cd $i; pwd)`
+ break
+ fi
+ done
+ fi
+ # check in a few common install locations
+ if test x"${ac_cv_c_itclconfig}" = x ; then
+ for i in `ls -d ${prefix}/lib /usr/local/lib 2>/dev/null` ; do
+ if test -f "$i/itclConfig.sh" ; then
+ ac_cv_c_itclconfig=`(cd $i; pwd)`
+ break
+ fi
+ done
+ fi
+ # check in a few other private locations
+ if test x"${ac_cv_c_itclconfig}" = x ; then
+ for i in \
+ ${srcdir}/../itcl/itcl \
+ `ls -dr ${srcdir}/../itcl[4-9]*/itcl 2>/dev/null` ; do
+ if test -f "$i/itclConfig.sh" ; then
+ ac_cv_c_itclconfig=`(cd $i; pwd)`
+ break
+ fi
+ done
+ fi
+
+fi
+
+ if test x"${ac_cv_c_itclconfig}" = x ; then
+ ITCLCONFIG="# no Itcl configs found"
+ echo "configure: warning: Can't find Itcl configuration definitions" 1>&2
+ else
+ no_itcl=
+ ITCLCONFIG=${ac_cv_c_itclconfig}/itclConfig.sh
+ echo "$ac_t""found $ITCLCONFIG" 1>&6
+ fi
+fi
+
+ if test -z "${no_itcl}"; then
+
+ if test -f "$ITCLCONFIG" ; then
+ . $ITCLCONFIG
+ fi
+
+
+
+
+
+
+
+
+
+
+
+ case "${host}" in
+ *-*-cygwin*)
+ itcldir=../itcl/itcl/win/
+ ;;
+ *)
+ itcldir=../itcl/itcl/unix/
+ ;;
+ esac
+
+
+ ITCLLIB="${ITCL_BUILD_LIB_SPEC}"
+ ITCL_DEPS="${itcldir}${ITCL_LIB_FILE}"
+ fi
+
+
+ # now look for Itk library stuff
+
+#
+# Ok, lets find the itk configuration
+# First, look for one uninstalled.
+# the alternative search directory is invoked by --with-itkconfig
+#
+
+if test x"${no_itk}" = x ; then
+ # we reset no_itk in case something fails here
+ no_itk=true
+ # Check whether --with-itkconfig or --without-itkconfig was given.
+if test "${with_itkconfig+set}" = set; then
+ withval="$with_itkconfig"
+ with_itkconfig=${withval}
+fi
+
+ echo $ac_n "checking for Itk configuration""... $ac_c" 1>&6
+echo "configure:6449: checking for Itk configuration" >&5
+ if eval "test \"`echo '$''{'ac_cv_c_itkconfig'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+
+
+ # First check to see if --with-itkconfig was specified.
+ if test x"${with_itkconfig}" != x ; then
+ if test -f "${with_itkconfig}/itkConfig.sh" ; then
+ ac_cv_c_itkconfig=`(cd ${with_itkconfig}; pwd)`
+ else
+ { echo "configure: error: ${with_itkconfig} directory doesn't contain itkConfig.sh" 1>&2; exit 1; }
+ fi
+ fi
+
+ # then check for a private Itk library
+ if test x"${ac_cv_c_itkconfig}" = x ; then
+ for i in \
+ ../itcl/itk \
+ `ls -dr ../itcl[4-9]*/itk 2>/dev/null` \
+ ../../itk \
+ `ls -dr ../../itcl[4-9]*/itk 2>/dev/null` \
+ ../../../itk \
+ `ls -dr ../../../itcl[4-9]*/itk 2>/dev/null` ; do
+ if test -f "$i/itkConfig.sh" ; then
+ ac_cv_c_itkconfig=`(cd $i; pwd)`
+ break
+ fi
+ done
+ fi
+ # check in a few common install locations
+ if test x"${ac_cv_c_itkconfig}" = x ; then
+ for i in `ls -d ${prefix}/lib /usr/local/lib 2>/dev/null` ; do
+ if test -f "$i/itkConfig.sh" ; then
+ ac_cv_c_itkconfig=`(cd $i; pwd)`
+ break
+ fi
+ done
+ fi
+ # check in a few other private locations
+ if test x"${ac_cv_c_itkconfig}" = x ; then
+ for i in \
+ ${srcdir}/../itcl/itk \
+ `ls -dr ${srcdir}/../itcl[4-9]*/itk 2>/dev/null` ; do
+ if test -f "$i/itkConfig.sh" ; then
+ ac_cv_c_itkconfig=`(cd $i; pwd)`
+ break
+ fi
+ done
+ fi
+
+fi
+
+ if test x"${ac_cv_c_itkconfig}" = x ; then
+ ITKCONFIG="# no Itk configs found"
+ echo "configure: warning: Can't find Itk configuration definitions" 1>&2
+ else
+ no_itk=
+ ITKCONFIG=${ac_cv_c_itkconfig}/itkConfig.sh
+ echo "$ac_t""found $ITKCONFIG" 1>&6
+ fi
+fi
+
+
+ if test -z "${no_itcl}"; then
+
+ if test -f "$ITKCONFIG" ; then
+ . $ITKCONFIG
+ fi
+
+
+
+
+
+
+
+
+
+
+
+
+ case "${host}" in
+ *-*-cygwin*)
+ itkdir=../itcl/itk/win/
+ ;;
+ *)
+ itkdir=../itcl/itk/unix/
+ ;;
+ esac
+
+ ITKLIB="${ITK_BUILD_LIB_SPEC}"
+ ITK_DEPS="${itkdir}${ITK_LIB_FILE}"
+ fi
+
+ # now look for Tix library stuff
+
+#
+# Ok, lets find the tix configuration
+# First, look for one uninstalled.
+# the alternative search directory is invoked by --with-itkconfig
+#
+
+if test x"${no_tix}" = x ; then
+ # we reset no_tix in case something fails here
+ no_tix=true
+ # Check whether --with-tixconfig or --without-tixconfig was given.
+if test "${with_tixconfig+set}" = set; then
+ withval="$with_tixconfig"
+ with_tixconfig=${withval}
+fi
+
+ echo $ac_n "checking for Tix configuration""... $ac_c" 1>&6
+echo "configure:6561: checking for Tix configuration" >&5
+ if eval "test \"`echo '$''{'ac_cv_c_tixconfig'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+
+
+ # First check to see if --with-tixconfig was specified.
+ if test x"${with_tixconfig}" != x ; then
+ if test -f "${with_tixconfig}/tixConfig.sh" ; then
+ ac_cv_c_tixconfig=`(cd ${with_tixconfig}; pwd)`
+ else
+ { echo "configure: error: ${with_tixconfig} directory doesn't contain tixConfig.sh" 1>&2; exit 1; }
+ fi
+ fi
+
+ # then check for a private Tix library
+ if test x"${ac_cv_c_tixconfig}" = x ; then
+ for i in \
+ ../tix \
+ `ls -dr ../tix 2>/dev/null` \
+ ../../tix \
+ `ls -dr ../../tix 2>/dev/null` \
+ ../../../tix \
+ `ls -dr ../../../tix 2>/dev/null` ; do
+ echo "**** Looking at $i - with ${configdir}"
+ if test -f "$i/tixConfig.sh" ; then
+ ac_cv_c_tixconfig=`(cd $i; pwd)`
+ break
+ fi
+ done
+ fi
+ # check in a few common install locations
+ if test x"${ac_cv_c_tixconfig}" = x ; then
+ for i in `ls -d ${prefix}/lib /usr/local/lib 2>/dev/null` ; do
+ echo "**** Looking at $i"
+ if test -f "$i/tixConfig.sh" ; then
+ ac_cv_c_tixconfig=`(cd $i; pwd)`
+ break
+ fi
+ done
+ fi
+ # check in a few other private locations
+ echo "**** Other private locations"
+ if test x"${ac_cv_c_tixconfig}" = x ; then
+ for i in \
+ ${srcdir}/../tix \
+ `ls -dr ${srcdir}/../tix 2>/dev/null` ; do
+ echo "**** Looking at $i - with ${configdir}"
+ if test -f "$i/${configdir}/tixConfig.sh" ; then
+ ac_cv_c_tixconfig=`(cd $i/${configdir}; pwd)`
+ break
+ fi
+ done
+ fi
+
+fi
+
+ if test x"${ac_cv_c_tixconfig}" = x ; then
+ TIXCONFIG="# no Tix configs found"
+ echo "configure: warning: Can't find Tix configuration definitions" 1>&2
+ else
+ no_tix=
+ TIXCONFIG=${ac_cv_c_tixconfig}/tixConfig.sh
+ echo "$ac_t""found $TIXCONFIG" 1>&6
+ fi
+fi
+
+
+ if test -z "${no_tix}"; then
+
+ if test -f "$TIXCONFIG" ; then
+ . $TIXCONFIG
+ fi
+
+
+
+
+
+
+
+
+ TIXLIB="${TIX_BUILD_LIB_SPEC}"
+ TIX_DEPS="${TIX_BUILD_LOCATION}/${TIX_LIB_FILE}"
+ fi
+
+ ENABLE_GDBTK=1
+ ENABLE_CFLAGS="$ENABLE_CFLAGS -DGDBTK"
+ # Tcl/Tk 8.1 require -fwritable strings. I don't
+ # know whether 8.2 will or not, but I bet it will.
+ # I don't have to worry about 7.x since we don't support it.
+ GDBTK_CFLAGS=""
+ if test "$GCC" = "yes"; then
+ if test "$TCL_VERSION" != "8.0" ; then
+ GDBTK_CFLAGS="-fwritable-strings"
+ fi
+ fi
+
+ # Include some libraries that Tcl and Tk want.
+ TCL_LIBS='$(LIBGUI) $(ITCL) $(ITK) $(TIX) $(TK) $(TCL) $(X11_LDFLAGS) $(X11_LIBS)'
+ CONFIG_DEPS='$(LIBGUI) $(ITCL_DEPS) $(ITK_DEPS) $(TIX_DEPS) $(TK_DEPS) $(TCL_DEPS)'
+ # Yes, the ordering seems wrong here. But it isn't.
+ # TK_LIBS is the list of libraries that need to be linked
+ # after Tcl/Tk. Note that this isn't put into LIBS. If it
+ # were in LIBS then any link tests after this point would
+ # try to include things like `$(LIBGUI)', which wouldn't work.
+ GDBTKLIBS="${TCL_LIBS} ${TK_LIBS}"
+ CONFIG_SRCS="${CONFIG_SRCS} gdbtk/generic/gdbtk.c gdbtk/generic/gdbtk-cmds.c gdbtk/generic/gdbtk-hooks.c gdbtk/generic/gdbtk-variable.c gdbtk/generic/gdbtk-wrapper.c"
+ CONFIG_OBS="${CONFIG_OBS} gdbtk.o gdbtk-cmds.o gdbtk-hooks.o gdbtk-variable.o gdbtk-wrapper.o"
+ CONFIG_INITS="${CONFIG_INITS} gdbtk/generic/gdbtk.c gdbtk/generic/gdbtk-cmds.c gdbtk/generic/gdbtk-hooks.c gdbtk/generic/gdbtk-variable.c gdbtk/generic/gdbtk-wrapper.c"
+
+ if test x$gdb_cv_os_cygwin = xyes; then
+ WIN32LIBS="${WIN32LIBS} -lshell32 -lgdi32 -lcomdlg32 -ladvapi32"
+ WIN32LDAPP="-Wl,--subsystem,console"
+ CONFIG_OBS="${CONFIG_OBS} gdbres.o"
+ fi
+ fi
+ fi
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
# If we find X, set shell vars x_includes and x_libraries to the
# paths, otherwise set no_x=yes.
files="${files} config/nm-empty.h"
links="${links} nm.h"
fi
+echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
+echo "configure:7159: checking whether ln -s works" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ rm -f conftestdata
+if ln -s X conftestdata 2>/dev/null
+then
+ rm -f conftestdata
+ ac_cv_prog_LN_S="ln -s"
+else
+ ac_cv_prog_LN_S=ln
+fi
+fi
+LN_S="$ac_cv_prog_LN_S"
+if test "$ac_cv_prog_LN_S" = "ln -s"; then
+ echo "$ac_t""yes" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+# Make it possible to use the GUI without doing a full install
+if test "${enable_gdbtk}" = "yes" ; then
+ if test "$LN_S" = "ln -s" -a ! -f gdbtcl ; then
+ echo linking $srcdir/gdbtk/library to gdbtcl
+ $LN_S $srcdir/gdbtk/library gdbtcl
+ else
+ echo Warning: Unable to link $srcdir/gdbtk/library to gdbtcl. You will need to do a
+ echo " " make install before you are able to run the GUI.
+ fi
+fi
fi
AC_SUBST(WIN32LIBS)
+LIBGUI="../libgui/src/libgui.a"
+GUI_CFLAGS_X="-I${srcdir}/../libgui/src"
+AC_SUBST(LIBGUI)
+AC_SUBST(GUI_CFLAGS_X)
AC_ARG_WITH(cpu,
[ --with-cpu=CPU Set the default CPU variant to debug],
],)
+ENABLE_GDBTK=
+
+AC_ARG_ENABLE(gdbtk,
+[ --enable-gdbtk Enable GDBTK GUI front end],
+[case "${enableval}" in
+ yes)
+ case "$host" in
+ *go32*)
+ AC_MSG_WARN([GDB does not support GDBtk on host ${host}. GDBtk will be disabled.])
+ enable_gdbtk=no ;;
+ *windows*)
+ AC_MSG_WARN([GDB does not support GDBtk on host ${host}. GDBtk will be disabled.])
+ enable_gdbtk=no ;;
+ *)
+ enable_gdbtk=yes ;;
+ esac ;;
+ no)
+ enable_gdbtk=no ;;
+ *)
+ AC_MSG_ERROR(bad value ${enableval} given for gdbtk option) ;;
+esac],
+[
+# Default is on for everything but go32 and Cygwin
+case "$host" in
+ *go32* | *windows*)
+ ;;
+ *)
+ enable_gdbtk=yes ;;
+ esac
+])
+
+WIN32LDAPP=
+AC_SUBST(WIN32LIBS)
+AC_SUBST(WIN32LDAPP)
+
+configdir="unix"
+
+GDBTKLIBS=
+if test "${enable_gdbtk}" = "yes"; then
+
+ CY_AC_PATH_TCLCONFIG
+ if test -z "${no_tcl}"; then
+ CY_AC_LOAD_TCLCONFIG
+ CY_AC_PATH_TKCONFIG
+
+ # If $no_tk is nonempty, then we can't do Tk, and there is no
+ # point to doing Tcl.
+ if test -z "${no_tk}"; then
+ CY_AC_LOAD_TKCONFIG
+ CY_AC_PATH_TCLH
+ CY_AC_PATH_TKH
+ CY_AC_PATH_ITCLH
+ CY_AC_PATH_ITKH
+ CY_AC_PATH_TIXH
+
+ # now look for Itcl library stuff
+
+ CY_AC_PATH_ITCLCONFIG
+ if test -z "${no_itcl}"; then
+ CY_AC_LOAD_ITCLCONFIG
+ case "${host}" in
+ *-*-cygwin*)
+ itcldir=../itcl/itcl/win/
+ ;;
+ *)
+ itcldir=../itcl/itcl/unix/
+ ;;
+ esac
+
+
+ ITCLLIB="${ITCL_BUILD_LIB_SPEC}"
+ ITCL_DEPS="${itcldir}${ITCL_LIB_FILE}"
+ fi
+
+
+ # now look for Itk library stuff
+ CY_AC_PATH_ITKCONFIG
+ if test -z "${no_itcl}"; then
+ CY_AC_LOAD_ITKCONFIG
+
+ case "${host}" in
+ *-*-cygwin*)
+ itkdir=../itcl/itk/win/
+ ;;
+ *)
+ itkdir=../itcl/itk/unix/
+ ;;
+ esac
+
+ ITKLIB="${ITK_BUILD_LIB_SPEC}"
+ ITK_DEPS="${itkdir}${ITK_LIB_FILE}"
+ fi
+
+ # now look for Tix library stuff
+ CY_AC_PATH_TIXCONFIG
+ if test -z "${no_tix}"; then
+ CY_AC_LOAD_TIXCONFIG
+ TIXLIB="${TIX_BUILD_LIB_SPEC}"
+ TIX_DEPS="${TIX_BUILD_LOCATION}/${TIX_LIB_FILE}"
+ fi
+
+ ENABLE_GDBTK=1
+ ENABLE_CFLAGS="$ENABLE_CFLAGS -DGDBTK"
+ # Tcl/Tk 8.1 require -fwritable strings. I don't
+ # know whether 8.2 will or not, but I bet it will.
+ # I don't have to worry about 7.x since we don't support it.
+ GDBTK_CFLAGS=""
+ if test "$GCC" = "yes"; then
+ if test "$TCL_VERSION" != "8.0" ; then
+ GDBTK_CFLAGS="-fwritable-strings"
+ fi
+ fi
+
+ # Include some libraries that Tcl and Tk want.
+ TCL_LIBS='$(LIBGUI) $(ITCL) $(ITK) $(TIX) $(TK) $(TCL) $(X11_LDFLAGS) $(X11_LIBS)'
+ CONFIG_DEPS='$(LIBGUI) $(ITCL_DEPS) $(ITK_DEPS) $(TIX_DEPS) $(TK_DEPS) $(TCL_DEPS)'
+ # Yes, the ordering seems wrong here. But it isn't.
+ # TK_LIBS is the list of libraries that need to be linked
+ # after Tcl/Tk. Note that this isn't put into LIBS. If it
+ # were in LIBS then any link tests after this point would
+ # try to include things like `$(LIBGUI)', which wouldn't work.
+ GDBTKLIBS="${TCL_LIBS} ${TK_LIBS}"
+ CONFIG_SRCS="${CONFIG_SRCS} gdbtk/generic/gdbtk.c gdbtk/generic/gdbtk-cmds.c gdbtk/generic/gdbtk-hooks.c gdbtk/generic/gdbtk-variable.c gdbtk/generic/gdbtk-wrapper.c"
+ CONFIG_OBS="${CONFIG_OBS} gdbtk.o gdbtk-cmds.o gdbtk-hooks.o gdbtk-variable.o gdbtk-wrapper.o"
+ CONFIG_INITS="${CONFIG_INITS} gdbtk/generic/gdbtk.c gdbtk/generic/gdbtk-cmds.c gdbtk/generic/gdbtk-hooks.c gdbtk/generic/gdbtk-variable.c gdbtk/generic/gdbtk-wrapper.c"
+
+ if test x$gdb_cv_os_cygwin = xyes; then
+ WIN32LIBS="${WIN32LIBS} -lshell32 -lgdi32 -lcomdlg32 -ladvapi32"
+ WIN32LDAPP="-Wl,--subsystem,console"
+ CONFIG_OBS="${CONFIG_OBS} gdbres.o"
+ fi
+ fi
+ fi
+fi
+
+AC_SUBST(ENABLE_GDBTK)
+AC_SUBST(X_CFLAGS)
+AC_SUBST(X_LDFLAGS)
+AC_SUBST(X_LIBS)
+AC_SUBST(ITCLLIB)
+AC_SUBST(ITCL_DEPS)
+AC_SUBST(ITKLIB)
+AC_SUBST(ITK_DEPS)
+AC_SUBST(TIXLIB)
+AC_SUBST(TIX_DEPS)
+AC_SUBST(GDBTKLIBS)
+AC_SUBST(GDBTK_CFLAGS)
AC_PATH_X
files="${files} config/nm-empty.h"
links="${links} nm.h"
fi
+AC_PROG_LN_S
+# Make it possible to use the GUI without doing a full install
+if test "${enable_gdbtk}" = "yes" ; then
+ if test "$LN_S" = "ln -s" -a ! -f gdbtcl ; then
+ echo linking $srcdir/gdbtk/library to gdbtcl
+ $LN_S $srcdir/gdbtk/library gdbtcl
+ else
+ echo Warning: Unable to link $srcdir/gdbtk/library to gdbtcl. You will need to do a
+ echo " " make install before you are able to run the GUI.
+ fi
+fi
AC_LINK_FILES($files, $links)
* remote.texi: Update documentation of set/show mipsfpu.
+Fri Jan 6 17:17:28 1995 Stan Shebs <shebs@andros.cygnus.com>
+
+ * gdbgui.texinfo: New file, manual for GUI (gdbtk) users.
+ * Makefile.in (gdbgui.dvi, gdbgui.info): New actions.
Sun Sep 4 16:47:21 1994 Stan Shebs (shebs@andros.cygnus.com)
gdb_toc.html: ${SFILES_DOC}
$(MAKEHTML) $(MAKEHTMLFLAGS) -I ${READLINE_DIR} -I $(srcdir) $(srcdir)/gdb.texinfo
+# GDB GUI MANUAL: TeX dvi file
+gdbgui.dvi : gdbgui.texinfo ${SFILES_DOC}
+ $(SET_TEXINPUTS) $(TEX) gdbgui.texinfo
+ $(TEXINDEX) gdbgui.??
+ $(SET_TEXINPUTS) $(TEX) gdbgui.texinfo
+ rm -f gdbgui.aux gdbgui.cp* gdbgui.fn* gdbgui.ky* \
+ gdbgui.log gdbgui.pg* gdbgui.toc gdbgui.tp* gdbgui.vr*
+
+# GDB GUI MANUAL: info file
+gdb-gui: gdbgui.info
+
+gdbgui.info: gdbgui.texinfo ${SFILES_DOC}
+ $(MAKEINFO) -o gdbgui.info $(srcdir)/gdbgui.texinfo
# GDB INTERNALS MANUAL: TeX dvi file
gdbint.dvi : gdbint.texinfo
--- /dev/null
+\input texinfo @c -*-texinfo-*-
+@c Copyright 1988 1989 1990 1991 1992 1993 1994 Free Software Foundation, Inc.
+@c
+@c %**start of header
+@c makeinfo ignores cmds prev to setfilename, so its arg cannot make use
+@c of @set vars. However, you can override filename with makeinfo -o.
+@setfilename gdb.info
+@c
+@include gdb-cfg.texi
+@c
+@ifset GENERIC
+@settitle Using the Graphical Interface to @value{GDBN}
+@end ifset
+@ifclear GENERIC
+@settitle Using the Graphical Interface to @value{GDBN} (@value{TARGET})
+@end ifclear
+@setchapternewpage odd
+@c %**end of header
+
+@c Since this interface is so new, there is much missing still.
+@c Desired but unimplemented features are commented out.
+
+@iftex
+@c @smallbook
+@c @cropmarks
+@end iftex
+
+@finalout
+@syncodeindex ky cp
+
+@c readline appendices use @vindex
+@syncodeindex vr cp
+
+@c !!set GDB manual's edition---not the same as GDB version!
+@set EDITION 4.13
+
+@c !!set GDB manual's revision date
+@set DATE January 1995
+
+@c THIS MANUAL REQUIRES TEXINFO-2 macros and info-makers to format properly.
+
+@ifinfo
+@c This is a dir.info fragment to support semi-automated addition of
+@c manuals to an info tree. zoo@cygnus.com is developing this facility.
+@format
+START-INFO-DIR-ENTRY
+* Gdb: (gdb). The GNU debugger.
+END-INFO-DIR-ENTRY
+@end format
+@end ifinfo
+@c
+@c
+@ifinfo
+This file documents the graphical interface to the GNU debugger @value{GDBN}.
+
+
+This is Edition @value{EDITION}, @value{DATE},
+of @cite{Using the Graphical Interface to @value{GDBN}}
+for GDB Version @value{GDBVN}.
+
+Copyright (C) 1994, 1995 Free Software Foundation, Inc.
+
+Permission is granted to make and distribute verbatim copies of
+this manual provided the copyright notice and this permission notice
+are preserved on all copies.
+
+@ignore
+Permission is granted to process this file through TeX and print the
+results, provided the printed document carries copying permission
+notice identical to this one except for the removal of this paragraph
+(this paragraph not being relevant to the printed manual).
+
+@end ignore
+Permission is granted to copy and distribute modified versions of this
+manual under the conditions for verbatim copying, provided also that the
+entire resulting derived work is distributed under the terms of a
+permission notice identical to this one.
+
+Permission is granted to copy and distribute translations of this manual
+into another language, under the above conditions for modified versions.
+@end ifinfo
+
+@titlepage
+@title Using the Graphical Interface to @value{GDBN}
+@subtitle The GNU Source-Level Debugger
+@ifclear GENERIC
+@subtitle (@value{TARGET})
+@end ifclear
+@sp 1
+@subtitle Edition @value{EDITION}, for @value{GDBN} version @value{GDBVN}
+@subtitle @value{DATE}
+@author Stanley T. Shebs
+@page
+@tex
+{\parskip=0pt
+\hfill (Send bugs and comments on @value{GDBN} to bug-gdb\@prep.ai.mit.edu.)\par
+\hfill {\it Debugging with @value{GDBN}}\par
+\hfill \TeX{}info \texinfoversion\par
+\hfill doc\@cygnus.com\par
+}
+@end tex
+
+@vskip 0pt plus 1filll
+Copyright @copyright{} 1994, 1995 Free Software Foundation, Inc.
+@sp 2
+
+Permission is granted to make and distribute verbatim copies of
+this manual provided the copyright notice and this permission notice
+are preserved on all copies.
+
+Permission is granted to copy and distribute modified versions of this
+manual under the conditions for verbatim copying, provided also that the
+entire resulting derived work is distributed under the terms of a
+permission notice identical to this one.
+
+Permission is granted to copy and distribute translations of this manual
+into another language, under the above conditions for modified versions.
+@end titlepage
+@page
+
+@ifinfo
+@node Top
+@top Using the Graphical Interface to @value{GDBN}
+@end ifinfo
+
+This file describes a graphical interface to @value{GDBN},
+the GNU symbolic debugger.
+
+@node Invocation
+@chapter Starting up GUI @value{GDBN}
+
+If @value{GDBN} has been configured to use the graphical interface,
+then you will get the interface automatically upon startup.
+
+When running as a Unix program and using the X11-based interface,
+you must of course be using an X server and/or workstation,
+and your @code{DISPLAY} environment variable must be set correctly.
+If either of these is not true, then @value{GDBN} will still start up,
+but will use only the traditional command interface.
+
+The exact layout and appearance of the windows will depend on the host
+system type. For instance, GDB under Windows will display its windows
+inside a larger window, while under Unix/X, each window is a separate
+toplevel window. However, general behavior and layout is consistent
+across all platforms; omissions or restrictions on particular platforms,
+if not documented as unavoidable, should be considered bugs and
+reported.
+
+All GDB windows have a common structure. Each window has an associated
+menu bar, which may be at the top of the window or perhaps elsewhere.
+Some of the menus and menu items in the menu bar are common to all GDB
+windows, while others are specific to particular types of windows.
+Below the menu bar is the working data area of the window. If the data
+is too large to display all at once, the data area will have scroll bars
+on its right and bottom sides. Below the data area are two optional
+features; a status/data line, and a button box.
+
+@section Menus
+
+@subsection File Menu
+
+The standard file menu provides operations that affect the overall state
+of GDB, mainly file operations, but other things as well.
+
+About GDB...
+
+Displays the startup window for GDB.
+
+File...
+
+Lets you set the combined executable and symbol file that GDB will use.
+(Like "file".)
+
+Target...
+
+Brings up a dialog that you can use to connect GDB to a target program.
+The dialog is described in more depth later.
+(Like "target".)
+
+Edit...
+
+Starts up an editor to modify the source file being displayed.
+
+Exec File...
+
+Lets you set the executable file that GDB will use.
+(Like "exec-file".)
+
+Symbol File...
+
+Lets you set the symbol file that GDB will use.
+(Like "symbol-file".)
+
+Add Symbol File...
+
+Lets you add additional symbol files.
+(Like "add-symbol-file".)
+
+Core File...
+
+Lets you set the core file that GDB will use.
+(Like "core-file".)
+
+Shared Libraries...
+
+(Like "sharedlibrary".)
+
+Quit
+
+quits GDB.
+(Like @samp{quit}.)
+
+
+@c @subsection Commands Menu
+
+@c The commands menu consists of items that let you run and control the program being
+@c debugged.
+@c
+@c Run
+@c
+@c Step
+@c
+@c Next
+@c
+@c Finish
+@c
+@c Stepi
+@c
+@c Nexti
+
+@subsection Windows Menu
+
+The windows menu allows access to all the windows available in GDB.
+The first part of the menu lists all of the predefined individual windows.
+If the window exists already, its item will be marked as such;
+selecting the item will cause the window to be put in front if it is
+obscured. If it does not exist, then it will be created.
+
+The second part of the menu lists additional windows that you may have
+created, such as source windows or variable displays.
+
+Command
+---
+Source
+Assembly
+---
+Registers
+Variables
+---
+Files
+@c ---
+@c <extra windows>
+
+@subsection View Menu
+
+All windows have a view menu, but its contents are highly specific to
+window type. For instance, a source window will have a view menu item
+to control the display of line numbers, but a register window will instead
+have an option to choose the radix in which to display register contents.
+You can find the full description of view options with each window type.
+
+@subsection Help Menu
+
+The help menu includes access to GDB's online help.
+
+@section Windows
+
+@subsection Command Window
+
+The command window provides access to the standard GDB command
+interpreter. In nearly all cases, commands typed into this window
+will behave exactly as for a non-windowing GDB.
+
+Note that not all changes to GDB will be reflected in this window. For instance,
+if you were to type a "step" command, then click on the "step" menu item in
+the source window, then go back, and type another "step" command, the command
+buffer will only show two steps, when you have actually done three. GDB will
+put a "..." into the command buffer when operations in other windows are done,
+as a reminder that the command buffer is incomplete.
+
+@c Also note that as a side effect of having the interface and possibly an
+@c associated scripting language built in, additional commands may be
+@c available. For instance, if tcl is in GDB, the command ``tcl <tcl code>''
+@c will be available.
+
+The command window has no status line or button box.
+
+@subsection Files Window
+
+The files window lists all of the files that were used to build the
+executable.
+
+Clicking on the xxx in the left margin expands/contracts the display of
+included files and symbols defined by the file.
+
+The View menu for this window includes the following items:
+Name/Full Pathname
+@c Sort by Name
+@c Sort by Section&Offset
+@c Show All Included Files
+@c Included File Indentation...
+
+@subsection Source Window
+
+A source window displays a single file of source code.
+
+The left margin includes an indicator for the current PC, breakpoints and potential breakpoints,
+and (optionally) line numbers.
+
+The View menu for this window includes the following items:
+Show Line Numbers
+Show Breakdots
+@c Jump to PC (if pc changes, scroll back so PC is centered)
+@c Tab... (set tabbing)
+
+@section Extensions
+
+[description of gdbtk details]
+
+@c
+@c GDBTK Interface Design
+@c
+@c This is the working document describing the design of the GDBTK
+@c interface. Note that overall layout applies only to the default setup;
+@c it is expected that debugger users will be able to customize extensively.
+@c
+@c Default Startup
+@c
+@c One source window, shows source as in "list main", does *not* set a
+@c break at main or run or anything. No current PC indicator, only put
+@c in when something runs.
+@c
+@c Source Window
+@c
+@c For native, "run" button is always the same, for cross, it's actually
+@c a "target" button that pops up appropriate dialog to get connected.
+@c Once remote target is active, change button to "run".
+@c
+@c Be able to toggle assembly interleaved between source.
+@c
+@c Command Window
+@c
+@c Is an *optional* window.
+@c
+@c Behavior mimics command-line GDB running in an Emacs buffer as much
+@c as possible.
+@c
+@c Assembly Window
+@c
+@c Be able to toggle source interleaved between assembly.
+@c
+@c Target Info Window
+@c
+@c Contents similar to "info target".
+@c
+@c Should expand into process and thread info also.
+@c
+@c File Info Window
+@c
+@c Contents similar to "info files".
+@c
+@c Include data shown in "info sources" as well as "info files".
+@c
+@c Register Info Window
+@c
+@c Contents similar to "info registers".
+@c
+@c Add view option(s) for classes of registers.
+@c
+@c Stack Info Window
+@c
+@c Combines backtrace, frame, and local var displays.
+@c
+@c Signals Dialog
+@c
+@c Includes all signals whose handling may be controlled, plus
+@c checkboxes for what to do with each.
+@c
+@c Settings Dialog(s)
+@c
+@c Include all variables that can be "set" and "show"n.
+@c
+@c General Principles
+@c
+@c All windows should have a menu that allows access to other windows.
+@c Selection of item either brings up for first time or brings to front.
+@c
+@c All windows should have a "view" menu that controls formatting
+@c options for that window.
+@c
+@c Windows should usually be scrollable. Windows that display largish
+@c horizontal things should be horizontal and vertical scrollbars.
+@c
+@c To do standard modification, add commands or tcl code to .gdbtkinit.
+@c
+@c Be able to record window positions so they come up in the same way
+@c the next time. Could scribble on .gdbtkinit perhaps, or else an
+@c aux file that can be sourced by .gdbtkinit.
+
+@section How to Build
+
+If GDB is configured with --enable-gdbtk, then upon startup, it will
+open windows.
+
+@node Index
+@unnumbered Index
+
+@printindex cp
+
+@contents
+@bye
{"command", required_argument, 0, 'x'},
{"version", no_argument, &print_version, 1},
{"x", required_argument, 0, 'x'},
+#ifdef GDBTK
+ {"tclcommand", required_argument, 0, 'z'},
+ {"enable-external-editor", no_argument, 0, 'y'},
+ {"editor-command", required_argument, 0, 'w'},
+#endif
{"ui", required_argument, 0, 'i'},
{"interpreter", required_argument, 0, 'i'},
{"i", required_argument, 0, 'i'},
cmdsize * sizeof (*cmdarg));
}
break;
+#ifdef GDBTK
+ case 'z':
+ {
+ extern int gdbtk_test PARAMS ((char *));
+ if (!gdbtk_test (optarg))
+ {
+ fprintf_unfiltered (gdb_stderr, "%s: unable to load tclcommand file \"%s\"",
+ argv[0], optarg);
+ exit (1);
+ }
+ break;
+ }
+ case 'y':
+ {
+ /*
+ * This enables the edit/button in the main window, even
+ * when IDE_ENABLED is set to false. In this case you must
+ * use --tclcommand to specify a tcl/script to be called,
+ * Tcl/Variable to store the edit/command is:
+ * external_editor
+ */
+ enable_external_editor = 1;
+ break;
+ }
+ case 'w':
+ {
+ /*
+ * if editor command is enabled, both flags are set
+ */
+ enable_external_editor = 1;
+ external_editor_command = xstrdup (optarg);
+ break;
+ }
+#endif /* GDBTK */
case 'd':
dirarg[ndir++] = optarg;
if (ndir >= dirsize)
commands. They're not germane to this test, and they don't work
that way on remote targets.
+1999-03-03 James Ingham <jingham@cygnus.com>
+
+ * browser.test: Fixed up to match the new function browser.
+ This is not done yet...
+
+ * srcwin.test: Check for errors when the bbox is called for a text
+ item that is not on screen (so bbox is ""). Return something more
+ useful.
+
+1999-03-01 James Ingham <jingham@cygnus.com>
+
+ * Changelog entries merged over from gdb development branch.
+
+ 1999-01-12 Martin Hunt <hunt@cygnus.com>
+
+ * gdb.gdbtk/srcwin.test: Add a bunch of tests for the source
+ window filename and function comboboxes. Add in stack tests.
+
+ 1999-01-11 Martin Hunt <hunt@cygnus.com>
+
+ * gdb.gdbtk/srcwin.test: New file. Source Window tests.
+ * gdb.gdbtk/srcwin.exp: New file. Source Window tests.
+
+ Wed Jan 6 09:22:52 1999 Keith Seitz <keiths@cygnus.com>
+
+ * gdb.gdbtk/c_variable.test (c_variable-1.9): Add new
+ test to check for creation of a variable that is really a type.
+ (c_variable-7.81): Use "output" instead of "print" to get PC.
+ Include missing bits of test.
+
+ * gdb.gdbtk/cpp_variable.test (cpp_variable-1.6): Default format
+ is now "natural", not "hexadecimal"
+ (cpp_variable-2.22): Ditto.
+ (cpp_variable-2.24): Force format to hex before getting value.
+
+ * gdb.gdbtk/cpp_variable.exp: Supply missing arg to gdbtk_analyze_results.
+
+ Tue Jan 5 12:40:52 1999 Keith Seitz <keiths@cygnus.com>
+
+ * gdb.gdbtk/c_variable.c, c_variable.test, c_variable.exp: New C
+ language tests for variable object interface.
+
+ * gdb.gdbtk/cpp_variable.h, cpp_variable.cc, cpp_variable.test,
+ cpp_variable.exp: New C++ language tests for variable object
+ interface.
+
+ * gdb.gdbtk/Makefile.in (EXECUTABLES): Add c_variable and cpp_variable.
+
+ Tue Jan 5 12:33:47 1999 Keith Seitz <keiths@cygnus.com>
+
+ * lib/gdb.exp (gdbtk_analyze_results): Generic function
+ for outputting results of test run.
+
+ * gdb.gdbtk/defs (gdbtk_test): Handle xpass and xfail.
+ (gdbtk_test_error): New proc which handles error aborts.
+
+ * gdb.gdbtk/console.exp: Use gdbtk_analyze_results.
+ Check if we have a valid DISPLAY before running.
+ * gdb.gdbtk/browser.exp: Ditto.
+
+ 1998-12-07 Martin M. Hunt <hunt@cygnus.com>
+
+ * lib/gdb.exp (gdbtk_start): Fix path for itcl library.
+ * gdb.gdbtk/browser.test: Change "manage open" to ManagedWin::open.
+ * gdb.gdbtk/console.test: Same.
+ * gdb.gdbtk/*: Update from devo.
+
+ Fri Jul 24 14:57:19 1998 Keith Seitz <keiths@cygnus.com>
+
+ * gdb.gdbtk/Makefile.in: Add new example program "stack".
+ * gdb.gdbtk/browser.test,browser.exp: Add browser window
+ tests.
+ * gdb.gdbtk/stack1.c,stack2.c: Test case for browser window.
+
1999-02-25 Felix Lee <flee@cygnus.com>
* lib/gdb.exp (debug_format): initialize
* gdb.base/commands.exp: Break up infrun_breakpoint_command_test
into two parts to get around a synchronization problem in expect.
+Sun Jun 28 22:34:34 1998 Martin M. Hunt <hunt@cygnus.com>
+
+ * gdb.gdbtk/simple.c (main): Make main return an
+ int so compiler will stop complaining.
+
+Fri Jun 26 14:27:13 1998 Keith Seitz <keiths@cygnus.com>
+
+ * lib/gdb.exp (gdbtk_start): Add startup for gdbtk.
+
+ * configure.in: Add options for gdbtk testsuite.
+
+ * configure: Regenerate.
+
+ * gdb.gdbtk: New directory to hold gdbtk tests.
+
+ * gdb.gdbtk/console.{exp, test}: New console window tests.
+
Fri Jun 26 14:52:47 1998 Peter Schauer <pes@regent.e-technik.tu-muenchen.de>
fi
# End stuff to support --enable-shared
+# Start stuff to support --enable-gdbtk
+# Check whether --enable-gdbtk or --disable-gdbtk was given.
+if test "${enable_gdbtk+set}" = set; then
+ enableval="$enable_gdbtk"
+ case "${enableval}" in
+ yes)
+ case "$host" in
+ *go32*)
+ enable_gdbtk=no ;;
+ *windows*)
+ enable_gdbtk=no ;;
+ *)
+ enable_gdbtk=yes ;;
+ esac ;;
+ no)
+ enable_gdbtk=no ;;
+ *)
+ { echo "configure: error: bad value ${enableval} given for gdbtk option" 1>&2; exit 1; } ;;
+esac
+else
+
+# Default is on for everything but go32 and windows
+case "$host" in
+ *go32* | *windows*)
+ ;;
+ *)
+ enable_gdbtk=yes ;;
+ esac
+
+fi
+
+
+if test "${enable_gdbtk}" = "yes"; then
+ configdirs="${configdirs} gdb.gdbtk"
+fi
+# End stuff to support --enable-shared
# configure the subdirectories too
subdirs="$configdirs"
fi
AC_SUBST(RPATH_ENVVAR)
# End stuff to support --enable-shared
+# Start stuff to support --enable-gdbtk
+AC_ARG_ENABLE(gdbtk,
+[ --enable-gdbtk ],
+[case "${enableval}" in
+ yes)
+ case "$host" in
+ *go32*)
+ enable_gdbtk=no ;;
+ *windows*)
+ enable_gdbtk=no ;;
+ *)
+ enable_gdbtk=yes ;;
+ esac ;;
+ no)
+ enable_gdbtk=no ;;
+ *)
+ AC_MSG_ERROR(bad value ${enableval} given for gdbtk option) ;;
+esac],
+[
+# Default is on for everything but go32 and windows
+case "$host" in
+ *go32* | *windows*)
+ ;;
+ *)
+ enable_gdbtk=yes ;;
+ esac
+])
+
+if test "${enable_gdbtk}" = "yes"; then
+ configdirs="${configdirs} gdb.gdbtk"
+fi
+# End stuff to support --enable-shared
# configure the subdirectories too
AC_CONFIG_SUBDIRS($configdirs)
}
}
+# From dejagnu:
+# srcdir = testsuite src dir (e.g., devo/gdb/testsuite)
+# objdir = testsuite obj dir (e.g., gdb/testsuite)
+# subdir = subdir of testsuite (e.g., gdb.gdbtk)
+#
+# To gdbtk:
+# env(DEFS)=the "defs" files (e.g., devo/gdb/testsuite/gdb.gdbtk/defs)
+# env(SRCDIR)=directory containing the test code (e.g., *.test)
+# env(OBJDIR)=directory which contains any executables
+# (e.g., gdb/testsuite/gdb.gdbtk)
+proc gdbtk_start {test} {
+ global verbose
+ global GDB
+ global GDBFLAGS
+ global env srcdir subdir objdir
+
+ gdb_stop_suppressing_tests;
+
+ verbose "Starting $GDB -nx -q --tclcommand=$test"
+
+ set real_test [which $test]
+ if {$real_test == 0} {
+ perror "$test is not found"
+ exit 1
+ }
+
+ if {![is_remote host]} {
+ if { [which $GDB] == 0 } {
+ perror "$GDB does not exist."
+ exit 1
+ }
+ }
+
+ set wd [pwd]
+ cd [file join $srcdir .. gdbtcl2]
+ set env(GDBTK_LIBRARY) [pwd]
+ cd [file join $srcdir .. .. tcl library]
+ set env(TCL_LIBRARY) [pwd]
+ cd [file join $srcdir .. .. tk library]
+ set env(TK_LIBRARY) [pwd]
+ cd [file join $srcdir .. .. tix library]
+ set env(TIX_LIBRARY) [pwd]
+ cd [file join $srcdir .. .. itcl itcl library]
+ set env(ITCL_LIBRARY) [pwd]
+ cd [file join .. $srcdir .. .. libgui library]
+ set env(CYGNUS_GUI_LIBRARY) [pwd]
+ cd $wd
+ cd [file join $srcdir $subdir]
+ set env(DEFS) [file join [pwd] defs]
+ cd $wd
+ cd [file join $objdir $subdir]
+ set env(OBJDIR) [pwd]
+ cd $wd
+ cd $srcdir
+ set env(SRCDIR) [pwd]
+ cd $wd
+ set env(GDBTK_VERBOSE) 1
+ set env(GDBTK_LOGFILE) [file join $objdir gdb.log]
+ set env(GDBTK_TEST_RUNNING) 1
+ set err [catch {exec $GDB -nx -q --tclcommand=$test} res]
+ if { $err } {
+ perror "Execing $GDB failed: $res"
+ exit 1;
+ }
+ return $res
+}
+
+# gdbtk tests call this function to print out the results of the
+# tests. The argument is a proper list of lists of the form:
+# {status name description msg}. All of these things typically
+# come from the testsuite harness.
+proc gdbtk_analyze_results {results} {
+ foreach test $results {
+ set status [lindex $test 0]
+ set name [lindex $test 1]
+ set description [lindex $test 2]
+ set msg [lindex $test 3]
+
+ switch $status {
+ PASS {
+ pass "$description ($name)"
+ }
+
+ FAIL {
+ fail "$description ($name)"
+ }
+
+ ERROR {
+ perror "$name"
+ }
+
+ XFAIL {
+ xfail "$description ($name)"
+ }
+
+ XPASS {
+ xpass "$description ($name)"
+ }
+ }
+ }
+}
#include "value.h"
#include "command.h"
+#include <tcl.h>
#include <windows.h>
#include <winuser.h> /* for WM_USER */
static void togdb_force_update PARAMS ((void));
+static void view_source PARAMS ((CORE_ADDR));
+
static void do_gdb (char *, char *, void (*func) PARAMS ((char *, int)), int);
long (__stdcall * UnregisterClient) PARAMS ((void));
+extern Tcl_Interp *gdbtk_interp;
/* Globals local to this file only */
static int ice_open = 0; /* Is ICE open? */
MessageBox (0, "Address resolution\nNot implemented", "GDB", MB_OK);
break;
case WM_SOURCE:
+ view_source ((CORE_ADDR) lParam);
break;
case WM_STATE_CHANGE:
switch (wParam)
printf_filtered ("continue (ice)\n");
ReplyMessage ((LRESULT) 1);
+ if (gdbtk_interp == NULL)
+ {
continue_command (NULL, 1);
+ }
+ else
+ Tcl_Eval (gdbtk_interp, "gdb_immediate continue");
return 1;
}
{
printf_unfiltered (str);
+ if (gdbtk_interp == NULL)
+ {
func (NULL, 0);
+ }
+ else
+ Tcl_Eval (gdbtk_interp, cmd);
}
}
static void
togdb_force_update (void)
{
+ if (gdbtk_interp != NULL)
+ Tcl_Eval (gdbtk_interp, "gdbtk_update");
}
+static void
+view_source (addr)
+ CORE_ADDR addr;
+{
+ char c[256];
+
+ if (gdbtk_interp != NULL)
+ {
+ sprintf (c, "catch {set src [lindex [ManagedWin::find SrcWin] 0]\n$src location BROWSE [gdb_loc *0x%x]}", addr);
+ Tcl_Eval (gdbtk_interp, c);
+ }
+}
/* Define the target subroutine names */
projects / external / binutils.git / commitdiff