#define CPCAP_BIT_RAND0 BIT(1) /* Set with CAL_MODE */
#define CPCAP_BIT_ADEN BIT(0) /* Currently unused */
+#define CPCAP_REG_ADCC1_DEFAULTS (CPCAP_BIT_ADEN_AUTO_CLR | \
+ CPCAP_BIT_ADC_CLK_SEL0 | \
+ CPCAP_BIT_RAND1)
+
/* Register CPCAP_REG_ADCC2 bits */
#define CPCAP_BIT_CAL_FACTOR_ENABLE BIT(15) /* Currently unused */
#define CPCAP_BIT_BATDETB_EN BIT(14) /* Currently unused */
#define CPCAP_BIT_ADC_PS_FACTOR0 BIT(9)
#define CPCAP_BIT_AD4_SELECT BIT(8) /* Currently unused */
#define CPCAP_BIT_ADC_BUSY BIT(7) /* Currently unused */
-#define CPCAP_BIT_THERMBIAS_EN BIT(6) /* Currently unused */
+#define CPCAP_BIT_THERMBIAS_EN BIT(6) /* Bias for AD0_BATTDETB */
#define CPCAP_BIT_ADTRIG_DIS BIT(5) /* Disable interrupt */
#define CPCAP_BIT_LIADC BIT(4) /* Currently unused */
#define CPCAP_BIT_TS_REFEN BIT(3) /* Currently unused */
#define CPCAP_BIT_TS_M1 BIT(1) /* Currently unused */
#define CPCAP_BIT_TS_M0 BIT(0) /* Currently unused */
+#define CPCAP_REG_ADCC2_DEFAULTS (CPCAP_BIT_AD4_SELECT | \
+ CPCAP_BIT_ADTRIG_DIS | \
+ CPCAP_BIT_LIADC | \
+ CPCAP_BIT_TS_M2 | \
+ CPCAP_BIT_TS_M1)
+
#define CPCAP_MAX_TEMP_LVL 27
#define CPCAP_FOUR_POINT_TWO_ADC 801
#define ST_ADC_CAL_CHRGI_HIGH_THRESHOLD 530
*/
enum cpcap_adc_channel {
/* Bank0 channels */
- CPCAP_ADC_AD0_BATTDETB, /* Battery detection */
+ CPCAP_ADC_AD0, /* Battery temperature */
CPCAP_ADC_BATTP, /* Battery voltage */
CPCAP_ADC_VBUS, /* USB VBUS voltage */
- CPCAP_ADC_AD3, /* Battery temperature when charging */
+ CPCAP_ADC_AD3, /* Die temperature when charging */
CPCAP_ADC_BPLUS_AD4, /* Another battery or system voltage */
CPCAP_ADC_CHG_ISENSE, /* Calibrated charge current */
CPCAP_ADC_BATTI, /* Calibrated system current */
/* Phasing table for channels. Note that channels 16 & 17 use BATTP and BATTI */
static const struct cpcap_adc_phasing_tbl bank_phasing[] = {
/* Bank0 */
- [CPCAP_ADC_AD0_BATTDETB] = {0, 0x80, 0x80, 0, 1023},
+ [CPCAP_ADC_AD0] = {0, 0x80, 0x80, 0, 1023},
[CPCAP_ADC_BATTP] = {0, 0x80, 0x80, 0, 1023},
[CPCAP_ADC_VBUS] = {0, 0x80, 0x80, 0, 1023},
[CPCAP_ADC_AD3] = {0, 0x80, 0x80, 0, 1023},
*/
static struct cpcap_adc_conversion_tbl bank_conversion[] = {
/* Bank0 */
- [CPCAP_ADC_AD0_BATTDETB] = {
+ [CPCAP_ADC_AD0] = {
IIO_CHAN_INFO_PROCESSED, 0, 0, 0, 1, 1,
},
[CPCAP_ADC_BATTP] = {
return;
switch (req->channel) {
+ case CPCAP_ADC_AD0:
+ value2 |= CPCAP_BIT_THERMBIAS_EN;
+ error = regmap_update_bits(ddata->reg, CPCAP_REG_ADCC2,
+ CPCAP_BIT_THERMBIAS_EN,
+ value2);
+ if (error)
+ return;
+ usleep_range(800, 1000);
+ break;
case CPCAP_ADC_AD8 ... CPCAP_ADC_TSY2_AD15:
value1 |= CPCAP_BIT_AD_SEL1;
break;
error = regmap_update_bits(ddata->reg, CPCAP_REG_ADCC2,
CPCAP_BIT_ATOX_PS_FACTOR |
CPCAP_BIT_ADC_PS_FACTOR1 |
- CPCAP_BIT_ADC_PS_FACTOR0,
+ CPCAP_BIT_ADC_PS_FACTOR0 |
+ CPCAP_BIT_THERMBIAS_EN,
value2);
if (error)
return;
return error;
}
+static int cpcap_adc_stop_bank(struct cpcap_adc *ddata)
+{
+ int error;
+
+ error = regmap_update_bits(ddata->reg, CPCAP_REG_ADCC1,
+ 0xffff,
+ CPCAP_REG_ADCC1_DEFAULTS);
+ if (error)
+ return error;
+
+ return regmap_update_bits(ddata->reg, CPCAP_REG_ADCC2,
+ 0xffff,
+ CPCAP_REG_ADCC2_DEFAULTS);
+}
+
static void cpcap_adc_phase(struct cpcap_adc_request *req)
{
const struct cpcap_adc_conversion_tbl *conv_tbl = req->conv_tbl;
return;
/* Temperatures use a lookup table instead of conversion table */
- if ((req->channel == CPCAP_ADC_AD0_BATTDETB) ||
+ if ((req->channel == CPCAP_ADC_AD0) ||
(req->channel == CPCAP_ADC_AD3)) {
req->result =
cpcap_adc_table_to_millicelcius(req->result);
req->conv_tbl = bank_conversion;
switch (channel) {
- case CPCAP_ADC_AD0_BATTDETB ... CPCAP_ADC_USB_ID:
+ case CPCAP_ADC_AD0 ... CPCAP_ADC_USB_ID:
req->bank_index = channel;
break;
case CPCAP_ADC_AD8 ... CPCAP_ADC_TSY2_AD15:
error = regmap_read(ddata->reg, chan->address, val);
if (error)
goto err_unlock;
+ error = cpcap_adc_stop_bank(ddata);
+ if (error)
+ goto err_unlock;
mutex_unlock(&ddata->lock);
break;
case IIO_CHAN_INFO_PROCESSED:
error = cpcap_adc_read_bank_scaled(ddata, &req);
if (error)
goto err_unlock;
+ error = cpcap_adc_stop_bank(ddata);
+ if (error)
+ goto err_unlock;
mutex_unlock(&ddata->lock);
*val = req.result;
break;