* config/h8300/h8300.c (h8300_init_once): Use MASK_H8300S_1

	instead of MASK_H8300S.
	* config/h8300/h8300.h (target_flags, MASK_H8300S, MASK_MAC,
	MASK_INT32, MASK_ADDRESSES, MASK_QUICKCALL, MASK_SLOWBYTE,
	MASK_NORMAL_MODE, MASK_RELAX, MASK_H8300H, MASK_ALIGN_300,
	MASK_H8300SX, TARGET_INT32, TARGET_ADDRESSES,
	TARGET_QUICKCALL, TARGET_SLOWBYTE, TARGET_H8300H,
	TARGET_H8300XS, TARGET_NORMAL_MODE, TARGET_ALIGN_300,
	TARGET_SWITCHES): Remove.
	(TARGET_H8300S): Redefine interms of TARGET_H8300S_1 and
	TARGET_H8300SX.
	* config/h8300/h8300.opt: New.

git-svn-id: svn+ssh://gcc.gnu.org/svn/gcc/trunk@96616 138bc75d-0d04-0410-961f-82ee72b054a4

diff --git a/gcc/ChangeLog b/gcc/ChangeLog
index eeecc6b..182567d 100644 (file)
--- a/gcc/ChangeLog
+++ b/gcc/ChangeLog
@@ -1,3 +1,18 @@
+2005-03-17  Kazu Hirata  <kazu@cs.umass.edu>
+
+       * config/h8300/h8300.c (h8300_init_once): Use MASK_H8300S_1
+       instead of MASK_H8300S.
+       * config/h8300/h8300.h (target_flags, MASK_H8300S, MASK_MAC,
+       MASK_INT32, MASK_ADDRESSES, MASK_QUICKCALL, MASK_SLOWBYTE,
+       MASK_NORMAL_MODE, MASK_RELAX, MASK_H8300H, MASK_ALIGN_300,
+       MASK_H8300SX, TARGET_INT32, TARGET_ADDRESSES,
+       TARGET_QUICKCALL, TARGET_SLOWBYTE, TARGET_H8300H,
+       TARGET_H8300XS, TARGET_NORMAL_MODE, TARGET_ALIGN_300,
+       TARGET_SWITCHES): Remove.
+       (TARGET_H8300S): Redefine interms of TARGET_H8300S_1 and
+       TARGET_H8300SX.
+       * config/h8300/h8300.opt: New.
+
 2005-03-17  Ian Lance Taylor  <ian@airs.com>
 
        * gmon.c: Remove.

diff --git a/gcc/config/h8300/h8300.c b/gcc/config/h8300/h8300.c
index b781035..36734b2 100644 (file)
--- a/gcc/config/h8300/h8300.c
+++ b/gcc/config/h8300/h8300.c
@@ -356,7 +356,7 @@ h8300_init_once (void)
   if (!TARGET_H8300S && TARGET_MAC)
     {
       error ("-ms2600 is used without -ms");
-      target_flags |= MASK_H8300S;
+      target_flags |= MASK_H8300S_1;
     }
 
   if (TARGET_H8300 && TARGET_NORMAL_MODE)

diff --git a/gcc/config/h8300/h8300.h b/gcc/config/h8300/h8300.h
index 85886dd..7730519 100644 (file)
--- a/gcc/config/h8300/h8300.h
+++ b/gcc/config/h8300/h8300.h
@@ -96,86 +96,15 @@ extern const char * const *h8_reg_names;
 
 #define TARGET_VERSION fprintf (stderr, " (Renesas H8/300)");
 
-/* Run-time compilation parameters selecting different hardware subsets.  */
-
-extern int target_flags;
-
-/* Masks for the -m switches.  */
-#define MASK_H8300S            0x00000001
-#define MASK_MAC               0x00000002
-#define MASK_INT32             0x00000008
-#define MASK_ADDRESSES         0x00000040
-#define MASK_QUICKCALL         0x00000080
-#define MASK_SLOWBYTE          0x00000100
-#define MASK_NORMAL_MODE       0x00000200
-#define MASK_RELAX             0x00000400
-#define MASK_H8300H            0x00001000
-#define MASK_ALIGN_300         0x00002000
-#define MASK_H8300SX           0x00004000
-
 /* Macros used in the machine description to test the flags.  */
 
-/* Make int's 32 bits.  */
-#define TARGET_INT32 (target_flags & MASK_INT32)
-
-/* Dump recorded insn lengths into the output file.  This helps debug the
-   md file.  */
-#define TARGET_ADDRESSES (target_flags & MASK_ADDRESSES)
-
-/* Pass the first few arguments in registers.  */
-#define TARGET_QUICKCALL (target_flags & MASK_QUICKCALL)
-
-/* Pretend byte accesses are slow.  */
-#define TARGET_SLOWBYTE (target_flags & MASK_SLOWBYTE)
-
 /* Select between the H8/300 and H8/300H CPUs.  */
 #define TARGET_H8300   (! TARGET_H8300H && ! TARGET_H8300S)
-#define TARGET_H8300H  (target_flags & MASK_H8300H)
-#define TARGET_H8300S  (target_flags & (MASK_H8300S | MASK_H8300SX))
-#define TARGET_H8300SX (target_flags & MASK_H8300SX)
+#define TARGET_H8300S  (TARGET_H8300S_1 || TARGET_H8300SX)
 /* Some multiply instructions are not available in all H8SX variants.
    Use this macro instead of TARGET_H8300SX to indicate this, even
    though we don't actually generate different code for now.  */
 #define TARGET_H8300SXMUL TARGET_H8300SX
-#define TARGET_NORMAL_MODE (target_flags & MASK_NORMAL_MODE)
-
-/* mac register and relevant instructions are available.  */
-#define TARGET_MAC    (target_flags & MASK_MAC)
-
-/* Align all values on the H8/300H the same way as the H8/300.  Specifically,
-   32 bit and larger values are aligned on 16 bit boundaries.
-   This is all the hardware requires, but the default is 32 bits for the H8/300H.
-   ??? Now watch someone add hardware floating point requiring 32 bit
-   alignment.  */
-#define TARGET_ALIGN_300 (target_flags & MASK_ALIGN_300)
-
-/* Macro to define tables used to set the flags.
-   This is a list in braces of pairs in braces,
-   each pair being { "NAME", VALUE }
-   where VALUE is the bits to set or minus the bits to clear.
-   An empty string NAME is used to identify the default VALUE.  */
-
-#define TARGET_SWITCHES                                                            \
-{ {"s",                         MASK_H8300S, N_("Generate H8S code")},             \
-  {"no-s",             -MASK_H8300S, N_("Do not generate H8S code")},      \
-  {"sx",                MASK_H8300SX, N_("Generate H8SX code")},           \
-  {"no-sx",            -MASK_H8300SX, N_("Do not generate H8SX code")},    \
-  {"s2600",             MASK_MAC, N_("Generate H8S/2600 code")},           \
-  {"no-s2600",         -MASK_MAC, N_("Do not generate H8S/2600 code")},    \
-  {"int32",             MASK_INT32, N_("Make integers 32 bits wide")},     \
-  {"addresses",                 MASK_ADDRESSES, NULL},                             \
-  {"quickcall",                 MASK_QUICKCALL,                                    \
-   N_("Use registers for argument passing")},                              \
-  {"no-quickcall",     -MASK_QUICKCALL,                                    \
-   N_("Do not use registers for argument passing")},                       \
-  {"slowbyte",          MASK_SLOWBYTE,                                     \
-   N_("Consider access to byte sized memory slow")},                       \
-  {"relax",             MASK_RELAX, N_("Enable linker relaxing")},         \
-  {"h",                         MASK_H8300H, N_("Generate H8/300H code")},         \
-  {"n",                         MASK_NORMAL_MODE, N_("Enable the normal mode")},   \
-  {"no-h",             -MASK_H8300H, N_("Do not generate H8/300H code")},  \
-  {"align-300",                 MASK_ALIGN_300, N_("Use H8/300 alignment rules")}, \
-  { "",                         TARGET_DEFAULT, NULL}}
 
 #ifdef IN_LIBGCC2
 #undef TARGET_H8300H

diff --git a/gcc/config/h8300/h8300.opt b/gcc/config/h8300/h8300.opt
new file mode 100644 (file)
index 0000000..bab46e3
--- /dev/null
+++ b/gcc/config/h8300/h8300.opt
@@ -0,0 +1,42 @@
+ms
+Target Mask(H8300S_1)
+Generate H8S code
+
+msx
+Target Mask(H8300SX)
+Generate H8SX code
+
+ms2600
+Target Mask(MAC)
+Generate H8S/2600 code
+
+mint32
+Target RejectNegative Mask(INT32)
+Make integers 32 bits wide
+
+maddresses
+Target Undocumented RejectNegative Mask(ADDRESSES)
+
+mquickcall
+Target Mask(QUICKCALL)
+Use registers for argument passing
+
+mslowbyte
+Target RejectNegative Mask(SLOWBYTE)
+Consider access to byte sized memory slow
+
+mrelax
+Target RejectNegative Mask(RELAX)
+Enable linker relaxing
+
+mh
+Target Mask(H8300H)
+Generate H8/300H code
+
+mn
+Target Mask(NORMAL_MODE)
+Enable the normal mode
+
+malign-300
+Target RejectNegative Mask(ALIGN_300)
+Use H8/300 alignment rules