mtd: nand: gpmi: switch to mtd_ooblayout_ops

Implementing the mtd_ooblayout_ops interface is the new way of exposing
ECC/OOB layout to MTD users.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Han Xu <han.xu@nxp.com>
Tested-by: Han Xu <han.xu@nxp.com>

diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
index 4721008..c50523b 100644 (file)
--- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
@@ -47,10 +47,44 @@ static struct nand_bbt_descr gpmi_bbt_descr = {
  * We may change the layout if we can get the ECC info from the datasheet,
  * else we will use all the (page + OOB).
  */
-static struct nand_ecclayout gpmi_hw_ecclayout = {
-       .eccbytes = 0,
-       .eccpos = { 0, },
-       .oobfree = { {.offset = 0, .length = 0} }
+static int gpmi_ooblayout_ecc(struct mtd_info *mtd, int section,
+                             struct mtd_oob_region *oobregion)
+{
+       struct nand_chip *chip = mtd_to_nand(mtd);
+       struct gpmi_nand_data *this = nand_get_controller_data(chip);
+       struct bch_geometry *geo = &this->bch_geometry;
+
+       if (section)
+               return -ERANGE;
+
+       oobregion->offset = 0;
+       oobregion->length = geo->page_size - mtd->writesize;
+
+       return 0;
+}
+
+static int gpmi_ooblayout_free(struct mtd_info *mtd, int section,
+                              struct mtd_oob_region *oobregion)
+{
+       struct nand_chip *chip = mtd_to_nand(mtd);
+       struct gpmi_nand_data *this = nand_get_controller_data(chip);
+       struct bch_geometry *geo = &this->bch_geometry;
+
+       if (section)
+               return -ERANGE;
+
+       /* The available oob size we have. */
+       if (geo->page_size < mtd->writesize + mtd->oobsize) {
+               oobregion->offset = geo->page_size - mtd->writesize;
+               oobregion->length = mtd->oobsize - oobregion->offset;
+       }
+
+       return 0;
+}
+
+static const struct mtd_ooblayout_ops gpmi_ooblayout_ops = {
+       .ecc = gpmi_ooblayout_ecc,
+       .free = gpmi_ooblayout_free,
 };
 
 static const struct gpmi_devdata gpmi_devdata_imx23 = {
@@ -141,7 +175,6 @@ static int set_geometry_by_ecc_info(struct gpmi_nand_data *this)
        struct bch_geometry *geo = &this->bch_geometry;
        struct nand_chip *chip = &this->nand;
        struct mtd_info *mtd = nand_to_mtd(chip);
-       struct nand_oobfree *of = gpmi_hw_ecclayout.oobfree;
        unsigned int block_mark_bit_offset;
 
        if (!(chip->ecc_strength_ds > 0 && chip->ecc_step_ds > 0))
@@ -229,12 +262,6 @@ static int set_geometry_by_ecc_info(struct gpmi_nand_data *this)
        geo->page_size = mtd->writesize + geo->metadata_size +
                (geo->gf_len * geo->ecc_strength * geo->ecc_chunk_count) / 8;
 
-       /* The available oob size we have. */
-       if (geo->page_size < mtd->writesize + mtd->oobsize) {
-               of->offset = geo->page_size - mtd->writesize;
-               of->length = mtd->oobsize - of->offset;
-       }
-
        geo->payload_size = mtd->writesize;
 
        geo->auxiliary_status_offset = ALIGN(geo->metadata_size, 4);
@@ -1842,6 +1869,7 @@ static void gpmi_nand_exit(struct gpmi_nand_data *this)
 static int gpmi_init_last(struct gpmi_nand_data *this)
 {
        struct nand_chip *chip = &this->nand;
+       struct mtd_info *mtd = nand_to_mtd(chip);
        struct nand_ecc_ctrl *ecc = &chip->ecc;
        struct bch_geometry *bch_geo = &this->bch_geometry;
        int ret;
@@ -1863,7 +1891,7 @@ static int gpmi_init_last(struct gpmi_nand_data *this)
        ecc->mode       = NAND_ECC_HW;
        ecc->size       = bch_geo->ecc_chunk_size;
        ecc->strength   = bch_geo->ecc_strength;
-       ecc->layout     = &gpmi_hw_ecclayout;
+       mtd_set_ooblayout(mtd, &gpmi_ooblayout_ops);
 
        /*
         * We only enable the subpage read when: