i2c: i801: Add DeviceIDs for SunrisePoint LP
authorDevin Ryles <devin.ryles@intel.com>
Wed, 5 Nov 2014 21:30:03 +0000 (16:30 -0500)
committerWolfram Sang <wsa@the-dreams.de>
Wed, 12 Nov 2014 16:19:13 +0000 (17:19 +0100)
Signed-off-by: Devin Ryles <devin.ryles@intel.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Documentation/i2c/busses/i2c-i801
drivers/i2c/busses/Kconfig
drivers/i2c/busses/i2c-i801.c

index 793c83d..82f48f7 100644 (file)
@@ -29,6 +29,7 @@ Supported adapters:
   * Intel Wildcat Point-LP (PCH)
   * Intel BayTrail (SOC)
   * Intel Sunrise Point-H (PCH)
+  * Intel Sunrise Point-LP (PCH)
    Datasheets: Publicly available at the Intel website
 
 On Intel Patsburg and later chipsets, both the normal host SMBus controller
index 917c358..06e99eb 100644 (file)
@@ -123,6 +123,7 @@ config I2C_I801
            Wildcat Point-LP (PCH)
            BayTrail (SOC)
            Sunrise Point-H (PCH)
+           Sunrise Point-LP (PCH)
 
          This driver can also be built as a module.  If so, the module
          will be called i2c-i801.
index 48b925a..8fafb25 100644 (file)
@@ -59,6 +59,7 @@
  * Wildcat Point-LP (PCH)      0x9ca2  32      hard    yes     yes     yes
  * BayTrail (SOC)              0x0f12  32      hard    yes     yes     yes
  * Sunrise Point-H (PCH)       0xa123  32      hard    yes     yes     yes
+ * Sunrise Point-LP (PCH)      0x9d23  32      hard    yes     yes     yes
  *
  * Features supported by this driver:
  * Software PEC                                no
 #define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_SMBUS         0x9c22
 #define PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_SMBUS      0x9ca2
 #define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_SMBUS       0xa123
+#define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_SMBUS      0x9d23
 
 struct i801_mux_config {
        char *gpio_chip;
@@ -846,6 +848,7 @@ static const struct pci_device_id i801_ids[] = {
        { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BAYTRAIL_SMBUS) },
        { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BRASWELL_SMBUS) },
        { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_SMBUS) },
+       { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_SMBUS) },
        { 0, }
 };