Reduce line lengths to 80 characters max.

diff --git a/board/siemens/SMN42/flash.c b/board/siemens/SMN42/flash.c
old mode 100644 (file)
new mode 100755 (executable)
index 7d4977e..e80df0b
--- a/board/siemens/SMN42/flash.c
+++ b/board/siemens/SMN42/flash.c
@@ -25,7 +25,8 @@
 #include <asm/byteorder.h>
 #include <asm/arch/hardware.h>
 
-static unsigned long flash_addr_table[CFG_MAX_FLASH_BANKS] = CFG_FLASH_BANKS_LIST;
+static unsigned long flash_addr_table[CFG_MAX_FLASH_BANKS] 
+                                               = CFG_FLASH_BANKS_LIST;
 flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
 
 extern int lpc2292_copy_buffer_to_flash(flash_info_t *, ulong);

diff --git a/disk/part.c b/disk/part.c
old mode 100644 (file)
new mode 100755 (executable)
index 54de737..61e6579
--- a/disk/part.c
+++ b/disk/part.c
@@ -220,7 +220,8 @@ void init_part (block_dev_desc_t * dev_desc)
 }
 
 
-int get_partition_info (block_dev_desc_t *dev_desc, int part, disk_partition_t *info)
+int get_partition_info (block_dev_desc_t *dev_desc, int part
+                                       , disk_partition_t *info)
 {
                switch (dev_desc->part_type) {
 #ifdef CONFIG_MAC_PARTITION
@@ -326,7 +327,8 @@ void print_part (block_dev_desc_t * dev_desc)
 
 
 #else  /* neither MAC nor DOS nor ISO partition configured */
-# error neither CONFIG_MAC_PARTITION nor CONFIG_DOS_PARTITION nor CONFIG_ISO_PARTITION configured!
+# error neither CONFIG_MAC_PARTITION nor CONFIG_DOS_PARTITION 
+# error nor CONFIG_ISO_PARTITION configured!
 #endif
 
 #endif /* (CONFIG_COMMANDS & CFG_CMD_IDE) || CONFIG_COMMANDS & CFG_CMD_SCSI) */

diff --git a/drivers/enc28j60.c b/drivers/enc28j60.c
old mode 100644 (file)
new mode 100755 (executable)
index c2ed485..36b084c
--- a/drivers/enc28j60.c
+++ b/drivers/enc28j60.c
@@ -548,7 +548,10 @@ static void encRx (void)
                m_nic_bfs (CTL_REG_ECON2, ENC_ECON2_PKTDEC);
 
                /* taken from the Linux driver */
-               /* Only odd values should be written to ERXRDPTL, see errata B4 pt.13 */                rxbuf_rdpt = (next_pointer_msb << 8 | next_pointer_lsb) - 1;
+               /* Only odd values should be written to ERXRDPTL, 
+                * see errata B4 pt.13 
+                */
+               rxbuf_rdpt = (next_pointer_msb << 8 | next_pointer_lsb) - 1;
                if ((rxbuf_rdpt < (m_nic_read(CTL_REG_ERXSTH) << 8 |
                                m_nic_read(CTL_REG_ERXSTL))) || (rxbuf_rdpt >
                                (m_nic_read(CTL_REG_ERXNDH) << 8 |
@@ -799,13 +802,15 @@ static void encInit (unsigned char *pEthAddr)
 
        /* enable MAC to receive frames */
        /* added some bits from the Linux driver */
-       m_nic_write_retry (CTL_REG_MACON1, (ENC_MACON1_MARXEN | ENC_MACON1_TXPAUS | ENC_MACON1_RXPAUS), 10);
+       m_nic_write_retry (CTL_REG_MACON1
+               ,(ENC_MACON1_MARXEN | ENC_MACON1_TXPAUS | ENC_MACON1_RXPAUS)
+               ,10);
 
        /* configure pad, tx-crc and duplex */
        /* added a bit from the Linux driver */
-       m_nic_write_retry (CTL_REG_MACON3,
-                          (ENC_MACON3_PADCFG0 | ENC_MACON3_TXCRCEN | ENC_MACON3_FRMLNEN),
-                          10);
+       m_nic_write_retry (CTL_REG_MACON3
+               ,(ENC_MACON3_PADCFG0 | ENC_MACON3_TXCRCEN | ENC_MACON3_FRMLNEN)
+               ,10);
 
        /* added 4 new lines from the Linux driver */
        /* Allow infinite deferals if the medium is continously busy */

diff --git a/fs/fat/fat.c b/fs/fat/fat.c
old mode 100644 (file)
new mode 100755 (executable)
index 084ee44..3007608
--- a/fs/fat/fat.c
+++ b/fs/fat/fat.c
@@ -59,7 +59,8 @@ int disk_read (__u32 startblock, __u32 getsize, __u8 * bufptr)
        if (cur_dev == NULL)
                return -1;
        if (cur_dev->block_read) {
-               return cur_dev->block_read (cur_dev->dev, startblock, getsize, (unsigned long *)bufptr);
+               return cur_dev->block_read (cur_dev->dev
+                       , startblock, getsize, (unsigned long *)bufptr);
        }
        return -1;
 }
@@ -996,7 +997,8 @@ file_fat_detectfs(void)
        memcpy (vol_label, volinfo.volume_label, 11);
        vol_label[11] = '\0';
        volinfo.fs_type[5]='\0';
-       printf("Partition %d: Filesystem: %s \"%s\"\n",cur_part,volinfo.fs_type,vol_label);
+       printf("Partition %d: Filesystem: %s \"%s\"\n"
+                       ,cur_part,volinfo.fs_type,vol_label);
        return 0;
 }
 

diff --git a/include/configs/SMN42.h b/include/configs/SMN42.h
old mode 100644 (file)
new mode 100755 (executable)
index 41330e9..1d2f28d
--- a/include/configs/SMN42.h
+++ b/include/configs/SMN42.h
@@ -134,7 +134,8 @@
 
 #undef  CFG_CLKS_IN_HZ         /* everything, incl board info, in Hz */
 
-#define        CFG_LOAD_ADDR           0x81000000      /* default load address for uClinux img is here*/
+#define        CFG_LOAD_ADDR           0x81000000      /* default load address 
+                                                 * for uClinux img is here*/
 
 #define CFG_SYS_CLK_FREQ        58982400        /* Hz */
 #define        CFG_HZ                  2048            /* decrementer freq in Hz */

diff --git a/include/configs/lpc2292sodimm.h b/include/configs/lpc2292sodimm.h
old mode 100644 (file)
new mode 100755 (executable)
index d817ea8..30e0b10
--- a/include/configs/lpc2292sodimm.h
+++ b/include/configs/lpc2292sodimm.h
@@ -101,7 +101,9 @@
 
 #undef  CFG_CLKS_IN_HZ         /* everything, incl board info, in Hz */
 
-#define        CFG_LOAD_ADDR           0x00040000      /* default load address for armadillo: kernel img is here*/
+#define        CFG_LOAD_ADDR           0x00040000      /* default load address for 
+                                                 * armadillo: kernel img is here
+                                                */
 
 #define CFG_SYS_CLK_FREQ        58982400        /* Hz */
 #define        CFG_HZ                  2048            /* decrementer freq in Hz */