#define HALO_STATE_DSP_CTL_NAME "HALO_STATE"
#define HALO_STATE_DSP_CTL_TYPE 5
#define HALO_STATE_DSP_CTL_ALG 262308
+#define CAL_R_DSP_CTL_NAME "CAL_R"
+#define CAL_STATUS_DSP_CTL_NAME "CAL_STATUS"
+#define CAL_CHECKSUM_DSP_CTL_NAME "CAL_CHECKSUM"
+#define CAL_AMBIENT_DSP_CTL_NAME "CAL_AMBIENT"
+#define CAL_DSP_CTL_TYPE 5
+#define CAL_DSP_CTL_ALG 205
static const struct reg_sequence cs35l41_hda_config[] = {
{ CS35L41_PLL_CLK_CTRL, 0x00000430 }, // 3072000Hz, BCLK Input, PLL_REFCLK_EN = 1
return ret;
}
+#if IS_ENABLED(CONFIG_EFI)
+static int cs35l41_apply_calibration(struct cs35l41_hda *cs35l41, unsigned int ambient,
+ unsigned int r0, unsigned int status, unsigned int checksum)
+{
+ int ret;
+
+ ret = hda_cs_dsp_write_ctl(&cs35l41->cs_dsp, CAL_AMBIENT_DSP_CTL_NAME, CAL_DSP_CTL_TYPE,
+ CAL_DSP_CTL_ALG, &ambient, 4);
+ if (ret) {
+ dev_err(cs35l41->dev, "Cannot Write Control: %s - %d\n", CAL_AMBIENT_DSP_CTL_NAME,
+ ret);
+ return ret;
+ }
+ ret = hda_cs_dsp_write_ctl(&cs35l41->cs_dsp, CAL_R_DSP_CTL_NAME, CAL_DSP_CTL_TYPE,
+ CAL_DSP_CTL_ALG, &r0, 4);
+ if (ret) {
+ dev_err(cs35l41->dev, "Cannot Write Control: %s - %d\n", CAL_R_DSP_CTL_NAME, ret);
+ return ret;
+ }
+ ret = hda_cs_dsp_write_ctl(&cs35l41->cs_dsp, CAL_STATUS_DSP_CTL_NAME, CAL_DSP_CTL_TYPE,
+ CAL_DSP_CTL_ALG, &status, 4);
+ if (ret) {
+ dev_err(cs35l41->dev, "Cannot Write Control: %s - %d\n", CAL_STATUS_DSP_CTL_NAME,
+ ret);
+ return ret;
+ }
+ ret = hda_cs_dsp_write_ctl(&cs35l41->cs_dsp, CAL_CHECKSUM_DSP_CTL_NAME, CAL_DSP_CTL_TYPE,
+ CAL_DSP_CTL_ALG, &checksum, 4);
+ if (ret) {
+ dev_err(cs35l41->dev, "Cannot Write Control: %s - %d\n", CAL_CHECKSUM_DSP_CTL_NAME,
+ ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int cs35l41_save_calibration(struct cs35l41_hda *cs35l41)
+{
+ static efi_guid_t efi_guid = EFI_GUID(0x02f9af02, 0x7734, 0x4233, 0xb4, 0x3d, 0x93, 0xfe,
+ 0x5a, 0xa3, 0x5d, 0xb3);
+ static efi_char16_t efi_name[] = L"CirrusSmartAmpCalibrationData";
+ const struct cs35l41_amp_efi_data *efi_data;
+ const struct cs35l41_amp_cal_data *cl;
+ unsigned long data_size = 0;
+ efi_status_t status;
+ int ret = 0;
+ u8 *data = NULL;
+ u32 attr;
+
+ /* Get real size of UEFI variable */
+ status = efi.get_variable(efi_name, &efi_guid, &attr, &data_size, data);
+ if (status == EFI_BUFFER_TOO_SMALL) {
+ ret = -ENODEV;
+ /* Allocate data buffer of data_size bytes */
+ data = vmalloc(data_size);
+ if (!data)
+ return -ENOMEM;
+ /* Get variable contents into buffer */
+ status = efi.get_variable(efi_name, &efi_guid, &attr, &data_size, data);
+ if (status == EFI_SUCCESS) {
+ efi_data = (struct cs35l41_amp_efi_data *)data;
+ dev_dbg(cs35l41->dev, "Calibration: Size=%d, Amp Count=%d\n",
+ efi_data->size, efi_data->count);
+ if (efi_data->count > cs35l41->index) {
+ cl = &efi_data->data[cs35l41->index];
+ dev_dbg(cs35l41->dev,
+ "Calibration: Ambient=%02x, Status=%02x, R0=%d\n",
+ cl->calAmbient, cl->calStatus, cl->calR);
+
+ /* Calibration can only be applied whilst the DSP is not running */
+ ret = cs35l41_apply_calibration(cs35l41,
+ cpu_to_be32(cl->calAmbient),
+ cpu_to_be32(cl->calR),
+ cpu_to_be32(cl->calStatus),
+ cpu_to_be32(cl->calR + 1));
+ }
+ }
+ vfree(data);
+ }
+ return ret;
+}
+#else
+static int cs35l41_save_calibration(struct cs35l41_hda *cs35l41)
+{
+ dev_warn(cs35l41->dev, "Calibration not supported without EFI support.\n");
+ return 0;
+}
+#endif
+
static int cs35l41_init_dsp(struct cs35l41_hda *cs35l41)
{
const struct firmware *coeff_firmware = NULL;
ret = cs_dsp_power_up(dsp, wmfw_firmware, wmfw_filename, coeff_firmware, coeff_filename,
FW_NAME);
+ if (ret)
+ goto err_release;
+
+ ret = cs35l41_save_calibration(cs35l41);
+err_release:
release_firmware(wmfw_firmware);
release_firmware(coeff_firmware);
kfree(wmfw_filename);