- Alsa driver for Digigram miXart8 and miXart8AES/EBU soundcards
- Digigram <alsa@digigram.com>
+==============================================================
+Alsa driver for Digigram miXart8 and miXart8AES/EBU soundcards
+==============================================================
+
+Digigram <alsa@digigram.com>
GENERAL
Mixer
-----
-<Master> and <Master Capture> : analog volume control of playback and capture PCM.
-<PCM 0-3> and <PCM Capture> : digital volume control of each analog substream.
-<AES 0-3> and <AES Capture> : digital volume control of each AES/EBU substream.
-<Monitoring> : Loopback from 'pcm0c' to 'pcm0p' with digital volume
-and mute control.
+<Master> and <Master Capture>
+ analog volume control of playback and capture PCM.
+<PCM 0-3> and <PCM Capture>
+ digital volume control of each analog substream.
+<AES 0-3> and <AES Capture>
+ digital volume control of each AES/EBU substream.
+<Monitoring>
+ Loopback from 'pcm0c' to 'pcm0p' with digital volume
+ and mute control.
Rem : for best audio quality try to keep a 0 attenuation on the PCM
and AES volume controls which is set by 219 in the range from 0 to 255
For loading the firmware automatically after the module is loaded, use a
install command. For example, add the following entry to
/etc/modprobe.d/mixart.conf for miXart driver:
+::
install snd-mixart /sbin/modprobe --first-time -i snd-mixart && \
/usr/bin/mixartloader
+
+
(for 2.2/2.4 kernels, add "post-install snd-mixart /usr/bin/vxloader" to
- /etc/modules.conf, instead.)
+/etc/modules.conf, instead.)
The firmware binaries are installed on /usr/share/alsa/firmware
(or /usr/local/share/alsa/firmware, depending to the prefix option of