iwlwifi: use iwl_poll_direct_bit in EEPROM reading
authorZhu, Yi <yi.zhu@intel.com>
Thu, 11 Dec 2008 18:33:36 +0000 (10:33 -0800)
committerJohn W. Linville <linville@tuxdriver.com>
Fri, 12 Dec 2008 19:45:33 +0000 (14:45 -0500)
The patch replaces the current reading EEPROM loop iterations with
iwl_poll_direct_bit(). It also fixes some comment error.

Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
drivers/net/wireless/iwlwifi/iwl-3945-hw.h
drivers/net/wireless/iwlwifi/iwl-csr.h
drivers/net/wireless/iwlwifi/iwl-eeprom.c
drivers/net/wireless/iwlwifi/iwl-eeprom.h
drivers/net/wireless/iwlwifi/iwl3945-base.c

index 15570e6..94ea0e6 100644 (file)
  * Driver reads 16-bit value from bits 31-16 of CSR_EEPROM_REG.
  */
 #define IWL_EEPROM_ACCESS_TIMEOUT      5000 /* uSec */
-#define IWL_EEPROM_ACCESS_DELAY                10   /* uSec */
 
 /*
  * Regulatory channel usage flags in EEPROM struct iwl_eeprom_channel.flags.
index b834e21..f34ede4 100644 (file)
 /* EEPROM REG */
 #define CSR_EEPROM_REG_READ_VALID_MSK  (0x00000001)
 #define CSR_EEPROM_REG_BIT_CMD         (0x00000002)
+#define CSR_EEPROM_REG_MSK_ADDR                (0x0000FFFC)
+#define CSR_EEPROM_REG_MSK_DATA                (0xFFFF0000)
 
 /* EEPROM GP */
 #define CSR_EEPROM_GP_VALID_MSK                (0x00000006)
index a47fa38..ce2f473 100644 (file)
@@ -209,10 +209,8 @@ int iwl_eeprom_init(struct iwl_priv *priv)
 {
        u16 *e;
        u32 gp = iwl_read32(priv, CSR_EEPROM_GP);
-       u32 r;
        int sz = priv->cfg->eeprom_size;
        int ret;
-       int i;
        u16 addr;
 
        /* allocate eeprom */
@@ -240,22 +238,19 @@ int iwl_eeprom_init(struct iwl_priv *priv)
 
        /* eeprom is an array of 16bit values */
        for (addr = 0; addr < sz; addr += sizeof(u16)) {
-               _iwl_write32(priv, CSR_EEPROM_REG, addr << 1);
-               _iwl_clear_bit(priv, CSR_EEPROM_REG, CSR_EEPROM_REG_BIT_CMD);
-
-               for (i = 0; i < IWL_EEPROM_ACCESS_TIMEOUT;
-                                       i += IWL_EEPROM_ACCESS_DELAY) {
-                       r = _iwl_read_direct32(priv, CSR_EEPROM_REG);
-                       if (r & CSR_EEPROM_REG_READ_VALID_MSK)
-                               break;
-                       udelay(IWL_EEPROM_ACCESS_DELAY);
-               }
+               u32 r;
+
+               _iwl_write32(priv, CSR_EEPROM_REG,
+                            CSR_EEPROM_REG_MSK_ADDR & (addr << 1));
 
-               if (!(r & CSR_EEPROM_REG_READ_VALID_MSK)) {
+               ret = iwl_poll_direct_bit(priv, CSR_EEPROM_REG,
+                                         CSR_EEPROM_REG_READ_VALID_MSK,
+                                         IWL_EEPROM_ACCESS_TIMEOUT);
+               if (ret < 0) {
                        IWL_ERROR("Time out reading EEPROM[%d]\n", addr);
-                       ret = -ETIMEDOUT;
                        goto done;
                }
+               r = _iwl_read_direct32(priv, CSR_EEPROM_REG);
                e[addr / 2] = le16_to_cpu((__force __le16)(r >> 16));
        }
        ret = 0;
index 4b9de7a..603c84b 100644 (file)
@@ -68,17 +68,14 @@ struct iwl_priv;
 /*
  * EEPROM access time values:
  *
- * Driver initiates EEPROM read by writing byte address << 1 to CSR_EEPROM_REG,
- *   then clearing (with subsequent read/modify/write) CSR_EEPROM_REG bit
- *   CSR_EEPROM_REG_BIT_CMD (0x2).
+ * Driver initiates EEPROM read by writing byte address << 1 to CSR_EEPROM_REG.
  * Driver then polls CSR_EEPROM_REG for CSR_EEPROM_REG_READ_VALID_MSK (0x1).
  * When polling, wait 10 uSec between polling loops, up to a maximum 5000 uSec.
  * Driver reads 16-bit value from bits 31-16 of CSR_EEPROM_REG.
  */
 #define IWL_EEPROM_ACCESS_TIMEOUT      5000 /* uSec */
-#define IWL_EEPROM_ACCESS_DELAY                10   /* uSec */
 
-#define IWL_EEPROM_SEM_TIMEOUT                 10   /* milliseconds */
+#define IWL_EEPROM_SEM_TIMEOUT                 10   /* microseconds */
 #define IWL_EEPROM_SEM_RETRY_LIMIT     1000 /* number of attempts (not time) */
 
 
index f883006..9f0db4f 100644 (file)
@@ -1504,10 +1504,8 @@ int iwl3945_eeprom_init(struct iwl3945_priv *priv)
 {
        u16 *e = (u16 *)&priv->eeprom;
        u32 gp = iwl3945_read32(priv, CSR_EEPROM_GP);
-       u32 r;
        int sz = sizeof(priv->eeprom);
-       int rc;
-       int i;
+       int ret;
        u16 addr;
 
        /* The EEPROM structure has several padding buffers within it
@@ -1522,29 +1520,28 @@ int iwl3945_eeprom_init(struct iwl3945_priv *priv)
        }
 
        /* Make sure driver (instead of uCode) is allowed to read EEPROM */
-       rc = iwl3945_eeprom_acquire_semaphore(priv);
-       if (rc < 0) {
+       ret = iwl3945_eeprom_acquire_semaphore(priv);
+       if (ret < 0) {
                IWL_ERROR("Failed to acquire EEPROM semaphore.\n");
                return -ENOENT;
        }
 
        /* eeprom is an array of 16bit values */
        for (addr = 0; addr < sz; addr += sizeof(u16)) {
-               _iwl3945_write32(priv, CSR_EEPROM_REG, addr << 1);
-               _iwl3945_clear_bit(priv, CSR_EEPROM_REG, CSR_EEPROM_REG_BIT_CMD);
+               u32 r;
 
-               for (i = 0; i < IWL_EEPROM_ACCESS_TIMEOUT;
-                                       i += IWL_EEPROM_ACCESS_DELAY) {
-                       r = _iwl3945_read_direct32(priv, CSR_EEPROM_REG);
-                       if (r & CSR_EEPROM_REG_READ_VALID_MSK)
-                               break;
-                       udelay(IWL_EEPROM_ACCESS_DELAY);
-               }
-
-               if (!(r & CSR_EEPROM_REG_READ_VALID_MSK)) {
+               _iwl3945_write32(priv, CSR_EEPROM_REG,
+                                CSR_EEPROM_REG_MSK_ADDR & (addr << 1));
+               _iwl3945_clear_bit(priv, CSR_EEPROM_REG, CSR_EEPROM_REG_BIT_CMD);
+               ret = iwl3945_poll_direct_bit(priv, CSR_EEPROM_REG,
+                                             CSR_EEPROM_REG_READ_VALID_MSK,
+                                             IWL_EEPROM_ACCESS_TIMEOUT);
+               if (ret < 0) {
                        IWL_ERROR("Time out reading EEPROM[%d]\n", addr);
-                       return -ETIMEDOUT;
+                       return ret;
                }
+
+               r = _iwl3945_read_direct32(priv, CSR_EEPROM_REG);
                e[addr / 2] = le16_to_cpu((__force __le16)(r >> 16));
        }